2018-11-08  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/constraints.md: Add "Z" series constraints for use
	with pre-dec and post-inc addressing.
	* config/pdp11/pdp11-protos.m (expand_block_move): Delete.
	(pdp11_expand_operands): Add int argument (word count).
	(pdp11_sp_frame_offset): Delete.
	(pdp11_cmp_length): New function.
	(pushpop_regeq): New function.
	* config/pdp11/pdp11.c (TARGET_STACK_PROTECT_RUNTIME_ENABLED_P):
	Add hook.
	(pdp11_expand_prologue, pdp11_expand_epilogue): Rewrite for new
	frame layout.
	(pdp11_initial_elimination_offset): Ditto.
	(pdp11_expand_operands): Add word count argument.  Bugfixes.
	(output_move_multiple): Change how pointer adjustment is done.
	(pdp11_gen_int_label): Correct format.
	(output_ascii): Ditto.
	(pdp11_asm_output_var): Add code for DEC assembler case.
	(pdp11_asm_print_operand): Bugfix for CONST_DOUBLE holding integer
	value.
	(legitimate_const_double_p): Ditto.
	(pdp11_register_move_cost): Adjust for new register classes.
	(pdp11_regno_reg_class): Ditto.
	(expand_block_move): Delete.
	(pushpop_regeq): New function.
	(pdp11_legitimate_address_p): Bugfix in check for constant
	offset.
	(pdp11_sp_frame_offset): Delete.
	(pdp11_reg_save_size): New helper function for new frame layout.
	(output_addr_const_pdp11): Remove CONST_DOUBLE case.
	(pdp11_expand_shift): Bugfix in check for constant shift count.
	(pdp11_shift_length): Ditto.
	(pdp11_assemble_shift): Copy input to pdp11_expand_operands.
	(pdp11_cmp_length): New function.
	* config/pdp11/pdp11.h (TARGET_CPU_CPP_BUILTINS): Add macros for
	some compile options.
	(FIXED_REGISTERS): Remove HARD_FRAME_POINTER_REGNUM.
	(CALL_USED_REGISTERS): Ditto.
	(ELIMINABLE_REGS): Ditto.
	(REGISTER_NAMES): Ditto.
	(reg_class): Add classes NOTR0_REG through NOTSP_REG for use by Z
	constraints.
	(REG_CLASS_NAMES): Ditto.
	(REG_CLASS_CONTENTS): Ditto.  Also remove
	HARD_FRAME_POINTER_REGNUM.
	(CPU_REG_CLASS): New macro.
	(CLASS_MAX_NREGS): Adjust for new register classes.
	(FUNCTION_PROFILER): Make no-op.
	(may_call_alloca): Remove unused declaration.
	(ASM_OUTPUT_ALIGN): Add workaround for PR87795.
	(ASM_OUTPUT_SKIP): Fix format.
	* config/pdp11/pdp11.md (unspecv): Add UNSPECV_MOVMEM.
	(HARD_FRAME_POINTER_REGNUM): Remove.
	(return): Delete.
	(*rts): Rename.  Remove epilogue related checks.
	(cmpsi, cmpdi): New insn.
	(cbranch<mode>4): Change to apply to SI and DI modes as well.
	(mov<mode>): Change constraints to enforce that push/pop
	destination cannot use the same register as source.
	(*mov<mode><cc_cc>): Ditto.
	(movmemhi, movmemhi1, movmemhi_nocc): Change to expand block move
	at assembly output rather than as RTL expander.
	(zero_extendqihi2): Bugfix in check for same registers.
	(adddi3_nocc): Bugfix in check for constant operand.
	(addsi3_nocc): Ditto.
	(subdi3_nocc): Ditto.
	(subsi3_nocc): Ditto.
	(negdi2_nocc): Copy input to pdp11_expand_operands.
	(negsi2_nocc): Ditto.
	(bswap2_nocc): Ditto.
	* config/pdp11/pdp11.opt (mlra): Fix documentation.
	* config/pdp11/t-pdp11: Use -Os.

2018-11-08  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/parsecpu.awk (/alias/): New parsing rule.
	(/begin cpu/): Check that the cpu name hasn't been previously defined.
	(gen_comm_data): Print out CPU alias tables.
	(check_cpu): Match aliases when checking the CPU name.
	* config/arm/arm-protos.h (cpu_alias): New structure.
	(cpu_option): Add entry for aliases.
	* config/arm/arm-cpus.in (strongarm): Add aliases for strongarm110
	strongarm1100 and strongarm1110.
	(strongarm110, strongarm1100, strongarm1110): Delete CPU entries.
	(config/arm/arm-generic.md): Remove redundant references to
	strongarm110, strongarm1100 and strongarm1110.
	* common/config/arm/arm-common.c (arm_print_hint_for_cpu_option):
	Scan aliases for additional hints.
	(arm_parse_cpu_option_name): Also match a cpu name against the list
	of aliases.
	* config/arm/arm-tables.opt: Regenerated.
	* config/arm/arm-tune.md: Regenerated.

2018-11-08  Jakub Jelinek  <jakub@redhat.com>

	* builtin-types.def (BT_FN_VOID_BOOL, BT_FN_VOID_SIZE_SIZE_PTR,
	BT_FN_UINT_UINT_PTR_PTR, BT_FN_UINT_OMPFN_PTR_UINT_UINT,
	BT_FN_BOOL_UINT_LONGPTR_LONG_LONG_LONGPTR_LONGPTR_PTR_PTR,
	BT_FN_BOOL_UINT_ULLPTR_LONG_ULL_ULLPTR_ULLPTR_PTR_PTR,
	BT_FN_BOOL_LONG_LONG_LONG_LONG_LONG_LONGPTR_LONGPTR_PTR_PTR,
	BT_FN_BOOL_BOOL_ULL_ULL_ULL_LONG_ULL_ULLPTR_ULLPTR_PTR_PTR): New.
	* gengtype.c (open_base_files): Add omp-general.h.
	* gimple.c (gimple_build_omp_critical):
	(gimple_build_omp_taskgroup): Add CLAUSES argument.  Call
	gimple_omp_taskgroup_set_clauses.
	(gimple_build_omp_atomic_load): Add mo argument, call
	gimple_omp_atomic_set_memory_order.
	(gimple_build_omp_atomic_store): Likewise.
	(gimple_copy): Adjust handling of GIMPLE_OMP_TASKGROUP.
	* gimple.def (GIMPLE_OMP_TASKGROUP): Use GSS_OMP_SINGLE_LAYOUT
	instead of GSS_OMP.
	(GIMPLE_OMP_TEAMS): Use GSS_OMP_PARALLEL_LAYOUT instead
	of GSS_OMP_SINGLE_LAYOUT, adjust comments.
	* gimple.h (enum gf_mask): Add GF_OMP_TEAMS_HOST, GF_OMP_TASK_TASKWAIT
	and GF_OMP_ATOMIC_MEMORY_ORDER.  Remove GF_OMP_ATOMIC_SEQ_CST, use
	different value for GF_OMP_ATOMIC_NEED_VALUE.
	(struct gimple_statement_omp_taskreg): Add GIMPLE_OMP_TEAMS to
	comments.
	(struct gimple_statement_omp_single_layout): And remove here.
	(struct gomp_teams): Inherit from gimple_statement_omp_taskreg rather
	than gimple_statement_omp_single_layout.
	(is_a_helper <gimple_statement_omp_taskreg *>::test): Allow
	GIMPLE_OMP_TEAMS.
	(is_a_helper <const gimple_statement_omp_taskreg *>::test): Likewise.
	(gimple_omp_subcode): Formatting fix.
	(gimple_omp_teams_child_fn, gimple_omp_teams_child_fn_ptr,
	gimple_omp_teams_set_child_fn, gimple_omp_teams_data_arg,
	gimple_omp_teams_data_arg_ptr, gimple_omp_teams_set_data_arg,
	gimple_omp_teams_host, gimple_omp_teams_set_host,
	gimple_omp_task_taskwait_p, gimple_omp_task_set_taskwait_p,
	gimple_omp_taskgroup_clauses, gimple_omp_taskgroup_clauses_ptr,
	gimple_omp_taskgroup_set_clauses): New inline functions.
	(gimple_build_omp_atomic_load): Add enum omp_memory_order argument.
	(gimple_build_omp_atomic_store): Likewise.
	(gimple_omp_atomic_seq_cst_p): Remove.
	(gimple_omp_atomic_memory_order): New function.
	(gimple_omp_atomic_set_seq_cst): Remove.
	(gimple_omp_atomic_set_memory_order): New function.
	(gimple_build_omp_taskgroup): Add clauses argument.
	* gimple-pretty-print.c (dump_gimple_omp_taskgroup): New function.
	(dump_gimple_omp_task): Print taskwait with depend clauses.
	(dump_gimple_omp_atomic_load, dump_gimple_omp_atomic_store): Use
	dump_omp_atomic_memory_order.
	(pp_gimple_stmt_1): Handle GIMPLE_OMP_TASKGROUP.
	* gimplify.c (enum gimplify_omp_var_data): Add GOVD_MAP_ALLOC_ONLY,
	GOVD_MAP_FROM_ONLY and GOVD_NONTEMPORAL.
	(enum omp_region_type): Reserve bits 1 and 2 for auxiliary flags,
	renumber values of most of ORT_* enumerators, add ORT_HOST_TEAMS,
	ORT_COMBINED_HOST_TEAMS, ORT_TASKGROUP, ORT_TASKLOOP and
	ORT_UNTIED_TASKLOOP enumerators.
	(enum gimplify_defaultmap_kind): New.
	(struct gimplify_omp_ctx): Remove target_map_scalars_firstprivate and
	target_map_pointers_as_0len_arrays members, add defaultmap.
	(new_omp_context): Initialize defaultmap member.
	(gimple_add_tmp_var): Handle ORT_TASKGROUP like ORT_WORKSHARE.
	(maybe_fold_stmt): Don't fold even in host teams regions.
	(omp_firstprivatize_variable): Handle ORT_TASKGROUP like
	ORT_WORKSHARE.  Test ctx->defaultmap[GDMK_SCALAR] instead of
	ctx->omp_firstprivatize_variable.
	(omp_add_variable): Don't add private/firstprivate for VLAs in
	ORT_TASKGROUP.
	(omp_default_clause): Print "taskloop" rather than "task" if
	ORT_*TASKLOOP.
	(omp_notice_variable): Handle ORT_TASKGROUP like ORT_WORKSHARE.
	Handle new defaultmap clause kinds.
	(omp_is_private): Handle ORT_TASKGROUP like ORT_WORKSHARE.  Allow simd
	iterator to be lastprivate or private.  Fix up diagnostics if linear
	is used on collapse>1 simd iterator.
	(omp_check_private): Handle ORT_TASKGROUP like ORT_WORKSHARE.
	(gimplify_omp_depend): New function.
	(gimplify_scan_omp_clauses): Add shared clause on parallel for
	combined parallel master taskloop{, simd} if taskloop has
	firstprivate, lastprivate or reduction clause.  Handle
	OMP_CLAUSE_REDUCTION_TASK diagnostics.  Adjust tests for
	ORT_COMBINED_TEAMS.  Gimplify depend clauses with iterators.  Handle
	cancel and simd OMP_CLAUSE_IF_MODIFIERs.  Handle
	OMP_CLAUSE_NONTEMPORAL.  Handle new defaultmap clause kinds.  Handle
	OMP_CLAUSE_{TASK,IN}_REDUCTION.  Diagnose invalid conditional
	lastprivate.
	(gimplify_adjust_omp_clauses_1): Ignore GOVD_NONTEMPORAL.  Handle
	GOVD_MAP_ALLOC_ONLY and GOVD_MAP_FROM_ONLY.  
	(gimplify_adjust_omp_clauses): Handle OMP_CLAUSE_NONTEMPORAL.  Handle
	OMP_CLAUSE_{TASK,IN}_REDUCTION.
	(gimplify_omp_task): Handle taskwait with depend clauses.
	(gimplify_omp_for): Add shared clause on parallel for combined
	parallel master taskloop{, simd} if taskloop has firstprivate,
	lastprivate or reduction clause.  Use ORT_TASKLOOP or
	ORT_UNTIED_TASKLOOP instead of ORT_TASK or ORT_UNTIED_TASK.  Adjust
	tests for ORT_COMBINED_TEAMS.  Handle C++ range for loops with
	NULL TREE_PURPOSE in OMP_FOR_ORIG_DECLS.  Firstprivatize
	__for_end and __for_range temporaries on OMP_PARALLEL for
	distribute parallel for{, simd}.  Move OMP_CLAUSE_REDUCTION
	and OMP_CLAUSE_IN_REDUCTION from taskloop to the task construct
	sandwiched in between two taskloops.
	(computable_teams_clause): Test ctx->defaultmap[GDMK_SCALAR]
	instead of ctx->omp_firstprivatize_variable.
	(gimplify_omp_workshare): Set ort to ORT_HOST_TEAMS or
	ORT_COMBINED_HOST_TEAMS if not inside of target construct.  If
	host teams, use gimplify_and_return_first etc. for body like
	for target or target data constructs, and at the end call
	gimple_omp_teams_set_host on the GIMPLE_OMP_TEAMS object.
	(gimplify_omp_atomic): Use OMP_ATOMIC_MEMORY_ORDER instead
	of OMP_ATOMIC_SEQ_CST, pass it as new argument to
	gimple_build_omp_atomic_load and gimple_build_omp_atomic_store, remove
	gimple_omp_atomic_set_seq_cst calls.
	(gimplify_expr) <case OMP_TASKGROUP>: Move handling into a separate
	case, handle taskgroup clauses.
	* lto-streamer-out.c (hash_tree): Handle
	OMP_CLAUSE_{TASK,IN}_REDUCTION.
	* Makefile.in (GTFILES): Add omp-general.h.
	* omp-builtins.def (BUILT_IN_GOMP_TASKWAIT_DEPEND,
	BUILT_IN_GOMP_LOOP_NONMONOTONIC_RUNTIME_START,
	BUILT_IN_GOMP_LOOP_MAYBE_NONMONOTONIC_RUNTIME_START,
	BUILT_IN_GOMP_LOOP_START, BUILT_IN_GOMP_LOOP_ORDERED_START,
	BUILT_IN_GOMP_LOOP_DOACROSS_START,
	BUILT_IN_GOMP_LOOP_NONMONOTONIC_RUNTIME_NEXT,
	BUILT_IN_GOMP_LOOP_MAYBE_NONMONOTONIC_RUNTIME_NEXT,
	BUILT_IN_GOMP_LOOP_ULL_NONMONOTONIC_RUNTIME_START,
	BUILT_IN_GOMP_LOOP_ULL_MAYBE_NONMONOTONIC_RUNTIME_START,
	BUILT_IN_GOMP_LOOP_ULL_START, BUILT_IN_GOMP_LOOP_ULL_ORDERED_START,
	BUILT_IN_GOMP_LOOP_ULL_DOACROSS_START,
	BUILT_IN_GOMP_LOOP_ULL_NONMONOTONIC_RUNTIME_NEXT,
	BUILT_IN_GOMP_LOOP_ULL_MAYBE_NONMONOTONIC_RUNTIME_NEXT,
	BUILT_IN_GOMP_PARALLEL_LOOP_NONMONOTONIC_RUNTIME,
	BUILT_IN_GOMP_PARALLEL_LOOP_MAYBE_NONMONOTONIC_RUNTIME,
	BUILT_IN_GOMP_PARALLEL_REDUCTIONS, BUILT_IN_GOMP_SECTIONS2_START,
	BUILT_IN_GOMP_TEAMS_REG, BUILT_IN_GOMP_TASKGROUP_REDUCTION_REGISTER,
	BUILT_IN_GOMP_TASKGROUP_REDUCTION_UNREGISTER,
	BUILT_IN_GOMP_TASK_REDUCTION_REMAP,
	BUILT_IN_GOMP_WORKSHARE_TASK_REDUCTION_UNREGISTER): New builtins.
	* omp-expand.c (workshare_safe_to_combine_p): Return false for
	non-worksharing loops.
	(omp_adjust_chunk_size): Don't adjust anything if chunk_size is zero.
	(determine_parallel_type): Don't combine parallel with worksharing
	which has _reductemp_ clause.
	(expand_parallel_call): Emit the GOMP_*nonmonotonic_runtime* or
	GOMP_*maybe_nonmonotonic_runtime* builtins instead of GOMP_*runtime*
	if there is nonmonotonic modifier or if there is no modifier and no
	ordered clause.  For dynamic and guided schedule without monotonic
	and nonmonotonic modifier, default to nonmonotonic.
	(expand_omp_for): Likewise.  Adjust expand_omp_for_generic caller, use
	GOMP_loop{,_ull}{,_ordered,_doacross}_start builtins if there are
	task reductions.
	(expand_task_call): Add GOMP_TASK_FLAG_REDUCTION flag to flags if
	there are any reduction clauses.
	(expand_taskwait_call): New function.
	(expand_teams_call): New function.
	(expand_omp_taskreg): Allow GIMPLE_OMP_TEAMS and call
	expand_teams_call for it.  Formatting fix.  Handle taskwait with
	depend clauses.
	(expand_omp_for_generic): Add SCHED_ARG argument.  Handle expansion
	of worksharing loops with task reductions.
	(expand_omp_for_static_nochunk, expand_omp_for_static_chunk): Handle
	expansion of worksharing loops with task reductions.
	(expand_omp_sections): Handle expansion of sections with task
	reductions.
	(expand_omp_synch): For host teams call expand_omp_taskreg.
	(omp_memory_order_to_memmodel): New function.
	(expand_omp_atomic_load, expand_omp_atomic_store,
	expand_omp_atomic_fetch_op): Use it and gimple_omp_atomic_memory_order
	instead of gimple_omp_atomic_seq_cst_p.
	(build_omp_regions_1, omp_make_gimple_edges): Treat taskwait with
	depend clauses as a standalone directive.
	* omp-general.c (enum omp_requires): New variable.
	(omp_extract_for_data): Initialize have_reductemp member.  Allow
	NE_EXPR even in OpenMP loops, transform them into LT_EXPR or
	GT_EXPR loops depending on incr sign.  Formatting fixes.
	* omp-general.h (struct omp_for_data): Add have_reductemp member.
	(enum omp_requires): New enum.
	(omp_requires_mask): Declare.
	* omp-grid.c (grid_eliminate_combined_simd_part): Formatting fix.
	Fix comment typos.
	* omp-low.c (struct omp_context): Add task_reductions and
	task_reduction_map fields.
	(is_host_teams_ctx): New function.
	(is_taskreg_ctx): Return true also if is_host_teams_ctx.
	(use_pointer_for_field): Use is_global_var instead of
	TREE_STATIC || DECL_EXTERNAL, and apply only if not privatized
	in outer contexts.
	(build_outer_var_ref): Ignore taskgroup outer contexts.
	(delete_omp_context): Release task_reductions and task_reduction_map.
	(scan_sharing_clauses): Don't add any fields for reduction clause on
	taskloop.  Handle OMP_CLAUSE__REDUCTEMP_.  Handle
	OMP_CLAUSE_{IN,TASK}_REDUCTION and OMP_CLAUSE_REDUCTION with task
	modifier.  Don't ignore shared clauses in is_host_teams_ctx contexts.
	Handle OMP_CLAUSE_NONTEMPORAL.
	(add_taskreg_looptemp_clauses): Add OMP_CLAUSE__REDUCTEMP_ clause if
	needed.
	(scan_omp_parallel): Add _reductemp_ clause if there are any reduction
	clauses with task modifier.
	(scan_omp_task): Handle taskwait with depend clauses.
	(finish_taskreg_scan): Move field corresponding to _reductemp_ clause
	first.  Move also OMP_CLAUSE__REDUCTEMP_ clause in front if present.
	Handle GIMPLE_OMP_TEAMS like GIMPLE_OMP_PARALLEL.
	(scan_omp_for): Fix comment formatting.
	(scan_omp_teams): Handle host teams constructs.
	(check_omp_nesting_restrictions): Allow teams with no outer
	OpenMP context.  Adjust diagnostics for teams strictly nested into
	some explicit OpenMP construct other than target.  Allow OpenMP atomics
	inside of simd regions.
	(scan_omp_1_stmt): Call scan_sharing_clauses for taskgroups.
	(scan_omp_1_stmt) <case GIMPLE_OMP_TEAMS>: Temporarily bump
	taskreg_nesting_level while scanning host teams construct.
	(task_reduction_read): New function.
	(lower_rec_input_clauses): Handle OMP_CLAUSE_REDUCTION on taskloop
	construct.  Handle OMP_CLAUSE_IN_REDUCTION and OMP_CLAUSE__REDUCTEMP_
	clauses.  Handle OMP_CLAUSE_REDUCTION with task modifier.  Remove
	second argument create_tmp_var if it is NULL.  Don't ignore shared
	clauses in is_host_teams_ctx contexts.  Handle
	OMP_CLAUSE_FIRSTPRIVATE_NO_REFERENCE on OMP_CLAUSE_FIRSTPRIVATE
	clauses.
	(lower_reduction_clauses): Ignore reduction clauses with task
	modifier.  Remove second argument create_tmp_var if it is NULL.
	Initialize OMP_ATOMIC_MEMORY_ORDER to relaxed.
	(lower_send_clauses): Ignore reduction clauses with task modifier.
	Handle OMP_CLAUSE__REDUCTEMP_.  Don't send anything for
	OMP_CLAUSE_REDUCTION on taskloop.  Handle OMP_CLAUSE_IN_REDUCTION.
	(maybe_add_implicit_barrier_cancel): Add OMP_RETURN argument, don't
	rely that it is the last stmt in body so far.  Ignore outer taskgroup
	contexts.
	(omp_task_reductions_find_first, omp_task_reduction_iterate,
	lower_omp_task_reductions): New functions.
	(lower_omp_sections): Handle reduction clauses with taskgroup
	modifiers.  Adjust maybe_add_implicit_barrier_cancel caller.
	(lower_omp_single): Adjust maybe_add_implicit_barrier_cancel caller.
	(lower_omp_for): Likewise.  Handle reduction clauses with taskgroup
	modifiers.
	(lower_omp_taskgroup): Handle taskgroup reductions.
	(create_task_copyfn): Copy over OMP_CLAUSE__REDUCTEMP_ pointer.
	Handle OMP_CLAUSE_IN_REDUCTION and OMP_CLAUSE_REDUCTION clauses.
	(lower_depend_clauses): If there are any
	OMP_CLAUSE_DEPEND_DEPOBJ or OMP_CLAUSE_DEPEND_MUTEXINOUTSET
	depend clauses, use a new array format.  If OMP_CLAUSE_DEPEND_LAST is
	seen, assume lowering is done already and return early.  Set kind
	on artificial depend clause to OMP_CLAUSE_DEPEND_LAST.
	(lower_omp_taskreg): Handle reduction clauses with task modifier on
	parallel construct.  Handle reduction clause on taskloop construct.
	Handle taskwait with depend clauses.
	(lower_omp_1): Use lower_omp_taskreg instead of lower_omp_teams
	for host teams constructs.
	* tree.c (omp_clause_num_ops): Add in_reduction, task_reduction,
	nontemporal and _reductemp_ clause entries.
	(omp_clause_code_name): Likewise.
	(walk_tree_1): Handle OMP_CLAUSE_{IN,TASK}_REDUCTION,
	OMP_CLAUSE_NONTEMPORAL and OMP_CLAUSE__REDUCTEMP_.
	* tree-core.h (enum omp_clause_code): Add
	OMP_CLAUSE_{{IN,TASK}_REDUCTION,NONTEMPORAL,_REDUCTEMP_}.
	(enum omp_clause_defaultmap_kind, enum omp_memory_order): New.
	(struct tree_base): Add omp_atomic_memory_order field into union.
	Remove OMP_ATOMIC_SEQ_CST comment.
	(enum omp_clause_depend_kind): Add OMP_CLAUSE_DEPEND_MUTEXINOUTSET
	and OMP_CLAUSE_DEPEND_DEPOBJ.
	(struct tree_omp_clause): Add subcode.defaultmap_kind.
	* tree.def (OMP_TASKGROUP): Add another operand, move next to other
	OpenMP constructs with body and clauses operands.
	* tree.h (OMP_BODY): Use OMP_MASTER instead of OMP_TASKGROUP.
	(OMP_CLAUSES): Use OMP_TASKGROUP instead of OMP_SINGLE.
	(OMP_TASKGROUP_CLAUSES): Define.
	(OMP_CLAUSE_DECL): Use OMP_CLAUSE__REDUCTEMP_ instead of
	OMP_CLAUSE__LOOPTEMP_.
	(OMP_ATOMIC_SEQ_CST): Remove.
	(OMP_ATOMIC_MEMORY_ORDER, OMP_CLAUSE_FIRSTPRIVATE_NO_REFERENCE,
	OMP_CLAUSE_LASTPRIVATE_CONDITIONAL): Define.
	(OMP_CLAUSE_REDUCTION_CODE, OMP_CLAUSE_REDUCTION_INIT,
	OMP_CLAUSE_REDUCTION_MERGE, OMP_CLAUSE_REDUCTION_PLACEHOLDER,
	OMP_CLAUSE_REDUCTION_DECL_PLACEHOLDER,
	OMP_CLAUSE_REDUCTION_OMP_ORIG_REF): Handle
	OMP_CLAUSE_{,IN_,TASK_}REDUCTION.
	(OMP_CLAUSE_REDUCTION_TASK, OMP_CLAUSE_REDUCTION_INSCAN,
	OMP_CLAUSE_DEFAULTMAP_KIND, OMP_CLAUSE_DEFAULTMAP_CATEGORY,
	OMP_CLAUSE_DEFAULTMAP_BEHAVIOR, OMP_CLAUSE_DEFAULTMAP_SET_KIND):
	Define.
	* tree-inline.c (remap_gimple_stmt): Remap taskgroup clauses.
	* tree-nested.c (convert_nonlocal_omp_clauses): Handle
	OMP_CLAUSE__REDUCTEMP_, OMP_CLAUSE_NONTEMPORAL.
	(convert_local_omp_clauses): Likewise.  Remove useless test.
	* tree-parloops.c (create_call_for_reduction_1): Pass
	OMP_MEMORY_ORDER_RELAXED as new argument to
	dump_gimple_omp_atomic_load and dump_gimple_omp_atomic_store.
	* tree-pretty-print.c (dump_omp_iterators): New function.
	(dump_omp_clause): Handle OMP_CLAUSE__REDUCTEMP_,
	OMP_CLAUSE_NONTEMPORAL, OMP_CLAUSE_{TASK,IN}_REDUCTION.  Print
	reduction modifiers.  Handle OMP_CLAUSE_DEPEND_DEPOBJ and
	OMP_CLAUSE_DEPEND_MUTEXINOUTSET.  Print iterators in depend clauses.
	Print __internal__ for OMP_CLAUSE_DEPEND_LAST.  Handle cancel and
	simd OMP_CLAUSE_IF_MODIFIERs.  Handle new kinds of
	OMP_CLAUSE_DEFAULTMAP. Print conditional: for
	OMP_CLAUSE_LASTPRIVATE_CONDITIONAL.
	(dump_omp_atomic_memory_order): New function.
	(dump_generic_node): Use it.  Print taskgroup clauses.  Print
	taskwait with depend clauses.
	* tree-pretty-print.h (dump_omp_atomic_memory_order): Declare.
	* tree-streamer-in.c (unpack_ts_omp_clause_value_fields):
	Handle OMP_CLAUSE_{TASK,IN}_REDUCTION.
	* tree-streamer-out.c (pack_ts_omp_clause_value_fields,
	write_ts_omp_clause_tree_pointers): Likewise.

2018-11-08  David Malcolm  <dmalcolm@redhat.com>

	PR ipa/86395
	* doc/invoke.texi (-fdump-ipa-): Document the "-optimized",
	"-missed", "-note", and "-all" sub-options.
	* ipa-inline.c (caller_growth_limits): Port from fprintf to dump
	API.
	(can_early_inline_edge_p): Likewise.
	(want_early_inline_function_p): Likewise.
	(want_inline_self_recursive_call_p): Likewise.
	(recursive_inlining): Likewise.
	(inline_small_functions): Likewise.
	(flatten_function): Likewise.
	(ipa_inline): Likewise.
	(inline_always_inline_functions): Likewise.
	(early_inline_small_functions): Likewise.
	(early_inliner): Likewise.
	* tree-inline.c (expand_call_inline): Likewise.

2018-11-08  David Malcolm  <dmalcolm@redhat.com>

	* pretty-print.c (pp_format): Handle %f.
	(selftest::test_pp_format): Add test of %f.
	* pretty-print.h (pp_double): New macro.

2018-11-08  David Malcolm  <dmalcolm@redhat.com>

	* dump-context.h (ASSERT_IS_CGRAPH_NODE): New macro.
	* dumpfile.c (make_item_for_dump_cgraph_node): Move to before...
	(dump_pretty_printer::decode_format): Implement "%C" for
	cgraph_node *.
	(selftest::test_capture_of_dump_calls): Rename "where" to
	"stmt_loc".  Convert test_decl to a function decl and set its
	location.  Add a symbol_table_test RAII instance and a
	cgraph_node, using it to test "%C" and dump_symtab_node.

2018-11-08  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/87916
	* cgraphclones.c (duplicate_thunk_for_node): Also set DECL_IGNORED_P.

2018-11-08  David Malcolm  <dmalcolm@redhat.com>

	* cgraph.c: Include "selftest.h".
	(saved_symtab): New variable.
	(selftest::symbol_table_test::symbol_table_test): New ctor.
	(selftest::symbol_table_test::~symbol_table_test): New dtor.
	(selftest::test_symbol_table_test): New test.
	(selftest::cgraph_c_tests): New.
	* cgraph.h (saved_symtab): New decl.
	(selftest::symbol_table_test): New class.
	* selftest-run-tests.c (selftest::run_tests): Call
	selftest::cgraph_c_tests.
	* selftest.h (selftest::cgraph_c_tests): New decl.

2018-11-08  Richard Biener  <rguenther@suse.de>

	* tree-data-ref.h (lambda_int): New typedef.
	(lambda_vector_gcd): Adjust.
	(lambda_vector_new): Likewise.
	(lambda_matrix_new): Likewise.
	* tree-data-ref.c  (print_lambda_vector): Adjust.

2018-11-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87929
	* tree-complex.c (expand_complex_comparison): Clean EH.

2018-11-08  Martin Liska  <mliska@suse.cz>

	* doc/extend.texi: Reword.
	* predict.c (expr_expected_value_1): Likewise.

2018-11-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87913
	* tree-ssa-phiopt.c (minmax_replacement): Turn EQ/NE compares
	of extreme values to ordered comparisons.

2018-11-07  Sandra Loosemore  <sandra@codesourcery.com>

	PR middle-end/42726
	* doc/invoke.texi (Code Gen Options): Clarify -fno-common behavior.

2018-11-07  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/invoke.texi: Remove leading dash from @opindex entries
	throughout the file.

2018-11-07  Sandra Loosemore  <sandra@codesourcery.com>

	PR driver/80828
	* doc/invoke.texi (Option Summary): Add -e and --entry.
	(Link Options): Likewise.

2018-11-07  Nathan Sidwell  <nathan@acm.org>

	PR 87926
	* Makefile.in (bitmap.o-warn): Add -Wno-error to unbreak
	--disable-checking bootstrap.

2018-11-07  Hafiz Abid Qadeer  <abidh@codesourcery.com>

	* configure: Regenerated.

2018-11-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	PR c/87691
	* stor-layout.c (compute_record_mode): Set TYPE_MODE of UNION_TYPE
	to the mode of the widest field iff the widest field has mode class
	MODE_INT, or MODE_PARTIAL_INT and the union would be passed by
	reference.

2018-11-07  Nikolai Merinov  <n.merinov@inango-systems.com>

	* common.opt: Add -Wattribute-warning.
	* doc/invoke.texi: Add documentation for -Wno-attribute-warning.
	* expr.c (expand_expr_real_1): Add new attribute to warning_at
	call to allow user configure behavior of "warning" attribute.

2018-11-07  Segher Boessenkool  <segher@kernel.crashing.org>

	* target.def: Put @: after every vs., e.g., and i.e. where it is
	followed by whitespace.
	* doc/extend.texi: Ditto.
	* doc/fragments.texi: Ditto.
	* doc/gimple.texi: Ditto.
	* doc/implement-c.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/invoke.texi: Ditto.
	* doc/md.texi: Ditto.
	* doc/plugins.texi: Ditto.
	* doc/rtl.texi: Ditto.
	* doc/sourcebuild.texi: Ditto.
	* doc/tm.texi.in: Ditto.
	* doc/ux.texi: Ditto.
	* doc/tm.texi: Regenerate.

2018-11-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (ares): New entry.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Likewise.
	* doc/invoke.texi (ARM Options): Document ares.

2018-11-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-cores.def (ares): Define.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi (AArch64 Options): Document ares value for mtune.

2018-11-07  Jan Hubicka  <jh@suse.cz>

	* tree.c (fld_incomplete_type_of): Clear TREE_ADDRESSABLE.
	(free_lang_data_in_decl): Set TREE_ADDRESSABLE for public vars and
	functions; clear TYPE_DECL_SUPPRESS_DEBUG and DECL_MODE for
	TYPE_DECL.

2018-11-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87914
	* tree-vect-loop.c (vect_is_simple_reduction): Improve detection
	of nested cycles.
	(vectorizable_reduction): Handle shifts and rotates by dispatching
	to vectorizable_shift.
	* tree-vect-stmts.c (vect_get_vec_def_for_operand_1): Handle
	in-loop uses of vect_nested_cycle defs.  Merge cycle and internal
	def cases.
	(vectorizable_shift): Export and handle being called as
	vect_nested_cycle.
	(vect_analyze_stmt): Call vectorizable_shift after
	vectorizable_reduction.
	* tree-vectorizer.h (vectorizable_shift): Declare.

2018-11-07  Jan Hubicka  <jh@suse.cz>

	* ipa-devirt.c (odr_types_equivalent_p): Expect constants
	than const decls in TREE_VALUE of enum.
	(dump_type_inheritance_graph): Improve duplicate dumping.
	(free_enum_values): New.
	(build_type_inheritance_graph): Use it.
	* tree.c (free_lang_data_in_type): Free TYPE_VALUES of enums
	which are not main variants or not ODR types.
	(verify_type_variant): Expect variants to have no TYPE_VALUES.

2018-11-07  Richard Biener  <rguenther@suse.de>

	* ipa-inline.c (want_inline_small_function_p): Compute
	big_speedup_p lazily and last.

2018-11-07  Jan Hubicka  <jh@suse.cz>

	* tree.c (fld_type_variant_equal_p): Skip TYPE_ALIGN check when
	building incomplete variant of complete type.
	(fld_type_variant): Do not copy TYPE_ALIGN when building incomplete
	variant of complete type.

2018-11-07  Chenghua Xu  <paul.hua.gm@gmail.com>

	* config/mips/mips.c: Fix typo in documentation of
	mips_loongson_ext2_prefetch_cookie.
	(mips_option_override): fix brain twister logical.
	* config/mips/mips.h: Fix typo in documentation of
	ISA_HAS_CTZ_CTO and define pattern.
	* config/mips/mips.md (prefetch): Hoist EXT2 above
	the 2EF/EXT block.
	(prefetch_indexed): Hoist EXT2 above the EXT block.

2018-11-07  Jan Hubicka  <jh@suse.cz>

	* tree.c (free_lang_data_in_type): Add fld parameter; simplify
	return and parameter types of function and method types.
	(free_lang_data_in_cgraph): Update.

2018-11-07  Martin Liska  <mliska@suse.cz>

	PR rtl-optimization/87868
	* postreload-gcse.c (eliminate_partially_redundant_load): Set
	threshold to max_count if we would overflow.
	* profile-count.h: Make max_count a public constant.

2018-11-07  Martin Liska  <mliska@suse.cz>

	* mem-stats.h: Fix GNU coding style.

2018-11-07  Chenghua Xu  <paul.hua.gm@gmail.com>

	* config/mips/gs264e.md: New.
	* config/mips/mips-cpus.def: Define gs264e.
	* config/mips/mips-tables.opt: Regenerate.
	* config/mips/mips.c (mips_rtx_cost_data): Add DEFAULT_COSTS for
	gs264e.
	(mips_issue_rate): Add support for gs264e.
	(mips_multipass_dfa_lookahead): Likewise.
	* config/mips/mips.h: Define TARGET_GS264E and TUNE_GS264E.
	(MIPS_ISA_LEVEL_SPEC): Infer mips64r2 from gs264e.
	(MIPS_ASE_MSA_SPEC): New.
	(BASE_DRIVER_SELF_SPECS): march=gs264e implies -mmsa.
	(ISA_HAS_FUSED_MADD4): Enable for TARGET_GS264E.
	(ISA_HAS_UNFUSED_MADD4): Exclude TARGET_GS264E.
	* config/mips/mips.md: Include gs264e.md.
	(processor): Add gs264e.
	* config/mips/mips.opt (MSA): Use Mask instead of Var.
	* doc/invoke.texi: Add gs264e to supported architectures.

2018-11-07  Chenghua Xu  <paul.hua.gm@gmail.com>

	* config/mips/gs464e.md: New.
	* config/mips/mips-cpus.def: Define gs464e.
	* config/mips/mips-tables.opt: Regenerate.
	* config/mips/mips.c (mips_rtx_cost_data): Add DEFAULT_COSTS for
	gs464e.
	(mips_issue_rate): Add support for gs464e.
	(mips_multipass_dfa_lookahead): Likewise.
	(mips_option_override): Enable MMI, EXT and EXT2 for gs464e.
	* config/mips/mips.h: Define TARGET_GS464E and TUNE_GS464E.
	(MIPS_ISA_LEVEL_SPEC): Infer mips64r2 from gs464e.
	(ISA_HAS_FUSED_MADD4): Enable for TARGET_GS464E.
	(ISA_HAS_UNFUSED_MADD4): Exclude TARGET_GS464E.
	* config/mips/mips.md: Include gs464e.md.
	(processor): Add gs464e.
	* doc/invoke.texi: Add gs464e to supported architectures.

2018-11-07  Chenghua Xu  <paul.hua.gm@gmail.com>

	* config/mips/loongson3a.md: Rename to ...
	* config/mips/gs464.md: ... here.
	* config/mips/mips-cpus.def: Define gs464; Add loongson3a
	as an alias of gs464 processor.
	* config/mips/mips-tables.opt: Regenerate.
	* config/mips/mips.c (mips_issue_rate): Use PROCESSOR_GS464
	instead of PROCESSOR_LOONGSON_3A.
	(mips_multipass_dfa_lookahead): Use TUNE_GS464 instead of
	TUNE_LOONGSON_3A.
	(mips_option_override): Enable MMI and EXT for gs464.
	* config/mips/mips.h: Rename TARGET_LOONGSON_3A to TARGET_GS464;
	Rename TUNE_LOONGSON_3A to TUNE_GS464.
	(MIPS_ISA_LEVEL_SPEC): Infer mips64r2 from gs464.
	(ISA_HAS_ODD_SPREG, ISA_AVOID_DIV_HILO, ISA_HAS_FUSED_MADD4,
	ISA_HAS_UNFUSED_MADD4): Use TARGET_GS464 instead of
	TARGET_LOONGSON_3A.
	* config/mips/mips.md: Include gs464.md instead of loongson3a.md.
	(processor): Add gs464;
	* doc/invoke.texi: Add gs464 to supported architectures.

2018-11-07  Chenghua Xu  <paul.hua.gm@gmail.com>

	* config/mips/mips-protos.h
	(mips_loongson_ext2_prefetch_cookie): New prototype.
	* config/mips/mips.c (mips_loongson_ext2_prefetch_cookie): New.
	(mips_option_override): Enable TARGET_LOONGSON_EXT when
	TARGET_LOONGSON_EXT2 is true.
	* config/mips/mips.h (TARGET_CPU_CPP_BUILTINS): Define
	__mips_loongson_ext2, __mips_loongson_ext_rev=2.
	(ISA_HAS_CTZ_CTO): New, true if TARGET_LOONGSON_EXT2.
	(ISA_HAS_PREFETCH): Include TARGET_LOONGSON_EXT and
	TARGET_LOONGSON_EXT2.
	(ASM_SPEC): Add mloongson-ext2 and mno-loongson-ext2.
	(define_insn "ctz<mode>2"): New insn pattern.
	(define_insn "prefetch"): Include TARGET_LOONGSON_EXT2.
	(define_insn "prefetch_indexed_<mode>"): Include
	TARGET_LOONGSON_EXT and TARGET_LOONGSON_EXT2.
	* config/mips/mips.opt (-mloongson-ext2): Add option.
	* gcc/doc/invoke.texi (-mloongson-ext2): Document.

2018-11-07  Chenghua Xu  <paul.hua.gm@gmail.com>

	* config/mips/mips.h (TARGET_CPU_CPP_BUILTINS): Add
	__mips_loongson_ext.
	(MIPS_ASE_LOONGSON_EXT_SPEC): New.
	(BASE_DRIVER_SELF_SPECS): march=loongson3a implies
	-mloongson-ext.
	(ASM_SPEC): Add mloongson-ext and mno-loongson-ext.
	* config/mips/mips.md (mul<mode>3, mul<mode>3_mul3_nohilo,
	<u>div<mode>3, <u>mod<mode>3, prefetch): Use TARGET_LOONGSON_EXT
	instead of TARGET_LOONGSON_3A.
	* config/mips/mips.opt (-mloongson-ext): Add option.
	* gcc/doc/invoke.texi (-mloongson-ext): Document.

2018-11-07  Chenghua Xu  <paul.hua.gm@gmail.com>

	* config.gcc (extra_headers): Add loongson-mmiintrin.h.
	* config/mips/loongson.md: Move to ...
	* config/mips/loongson-mmi.md: here; Adjustment.
	* config/mips/loongson.h: Move to ...
	State as deprecated. Include loongson-mmiintrin.h for back
	compatibility and warning.
	* config/mips/loongson-mmiintrin.h: ... here.
	* config/mips/mips.c (mips_hard_regno_mode_ok_uncached,
	mips_vector_mode_supported_p, AVAIL_NON_MIPS16): Use
	TARGET_LOONGSON_MMI instead of TARGET_LOONGSON_VECTORS.
	(mips_option_override): Make sure MMI use hard float;
	(mips_shift_truncation_mask, mips_expand_vpc_loongson_even_odd,
	mips_expand_vpc_loongson_pshufh, mips_expand_vpc_loongson_bcast,
	mips_expand_vector_init): Use TARGET_LOONGSON_MMI instead of
	TARGET_LOONGSON_VECTORS.
	* gcc/config/mips/mips.h (TARGET_LOONGSON_VECTORS): Delete.
	(TARGET_CPU_CPP_BUILTINS): Add __mips_loongson_mmi.
	(MIPS_ASE_DSP_SPEC, MIPS_ASE_LOONGSON_MMI_SPEC): New.
	(BASE_DRIVER_SELF_SPECS): march=loongson2e/2f/3a implies
	-mloongson-mmi.
	(SHIFT_COUNT_TRUNCATED): Use TARGET_LOONGSON_MMI instead of
	TARGET_LOONGSON_VECTORS.
	* gcc/config/mips/mips.md (MOVE64, MOVE128): Use
	TARGET_LOONGSON_MMI instead of TARGET_LOONGSON_VECTORS.
	(Loongson MMI patterns): Include loongson-mmi.md instead of
	loongson.md.
	* gcc/config/mips/mips.opt (-mloongson-mmi): New option.
	* gcc/doc/invoke.texi (-mloongson-mmi): Document.

2018-11-07  Richard Biener  <rguenther@suse.de>

	PR lto/87906
	* tree-streamer-in.c (lto_input_ts_block_tree_pointers): Fixup
	BLOCK_ABSTRACT_ORIGIN to be the ultimate origin.

2018-11-07  Alexandre Oliva <aoliva@redhat.com>

	PR rtl-optimization/87874
	* lra.c (lra_substitute_pseudo): Do not create a subreg for
	const wide ints.

2018-11-06  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000.md (bswap<mode>2): Force address into register
	if not in indexed or indirect form.
	(bswap<mode>2_load): Change predicate to indexed_or_indirect_operand.
	(bswap<mode>2_store): Ditto.

2018-11-06  Richard Earnshaw  <rearnsha@arm.com>

	* config/aarch64/aarch64.md (speculation_tracker): Set the mode for
	the UNSPEC.

2018-11-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86850
	* vec.h (vec<T, va_heap, vl_ptr>::splice): Check src.length ()
	instead of src.m_vec.

2018-11-06  Jan Hubicka  <jh@suse.cz>

	* tree.c (fld_simplified_type_name): Break out form ...
	(free_lang_data_in_type): ... here.
	(fld_type_variant_equal_p): Use it.

2018-11-06  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/default-d.c: Include memmodel.h.

	* config/sol2-d.c: New file.
	* config/t-sol2 (sol2-d.o): New rule.
	* config.gcc <*-*-solaris2*>: Set d_target_objs,
	target_has_targetdm.

2018-11-06  Jan Hubicka  <jh@suse.cz>

	* tree.c (fld_type_variant): Also copy alignment; be sure that
	new variant is equal.

2018-11-06  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/87762
	* config/s390/s390.md: Add relative_long attribute.

2018-11-06  Jan Hubicka  <jh@suse.cz>

	* ipa-pure-const.c (check_decl): Do not test TYPE_NEEDS_CONSTRUCTING.
	* lto-streamer-out.c (hash_tree): Do not hash TYPE_NEEDS_CONSTRUCTING.
	* tree-streamer-in.c (unpack_ts_type_common_value_fields): Do not
	stream TYPE_NEEDS_CONSTRUCTING.
	* tree-streamer-out.c (pack_ts_type_common_value_fields): Likewise.
	* tree.c (free_lang_data_in_type): Clear TYPE_NEEDS_CONSTRUCTING.

2018-11-06  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_slp_bb): Move opening of vect_slp_analyze_bb
	dump-scope ...
	(vect_slp_analyze_bb_1): ... here to avoid hiding optimized locations.

2018-11-06  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* gcc/config/msp430/msp430.h (REG_CLASS_CONTENTS): Add R0 to
	REG_CLASS_CONTENTS[GEN_REGS].
	(REGNO_REG_CLASS): Return NO_REGS for R2 and R3.

2018-11-06  Jan Hubicka  <jh@suse.cz>

	 * tree.c (fld_simplified_type_of): Clear TYPELESS_STORAGE flag.

2018-11-06  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR sanitizer/80953
	* config/sol2.h (ASAN_CC1_SPEC): Define.
	(LD_WHOLE_ARCHIVE_OPTION): Define.
	(LD_NO_WHOLE_ARCHIVE_OPTION): Define.
	(ASAN_REJECT_SPEC): Provide default.
	(LIBASAN_EARLY_SPEC): Define.
	(LIBTSAN_EARLY_SPEC): Define.
	(LIBLSAN_EARLY_SPEC): Define.
	* config/i386/sol2.h (CC1_SPEC): Redefine.
	(ASAN_REJECT_SPEC): Define.

	* config/sparc/sparc.c (sparc_asan_shadow_offset): Declare.
	(TARGET_ASAN_SHADOW_OFFSET): Define.
	(sparc_asan_shadow_offset): New function.
	* config/sparc/sol2.h (CC1_SPEC): Append ASAN_CC1_SPEC.
	(ASAN_REJECT_SPEC): Define.

2018-11-06  Jan Hubicka  <jh@suse.cz>

	* tree.c (fld_type_variant): Copy canonical type.
	(fld_incomplete_type_of): Check that canonical types looks sane;
	copy canonical type.
	(verify_type): Accept when incomplete type has complete canonical type.

2018-11-06  Jan Hubicka  <jh@suse.cz>

	* tree.c (free_lang_data): Reset overwite_assembler_name,
	print_xnode, print_decl, print_type and print_identifier of
	langhooks.

2018-11-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87889
	* tree-vect-loop-manip.c (slpeel_duplicate_current_defs_from_edges):
	Do nothing if old and new arg are the same

2018-11-06  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/87723
	* config/s390/s390.md ("*r<noxa>sbg_di_rotl"): Remove mode
	attributes for operands 3 and 4.

2018-11-06  Richard Biener  <rguenther@suse.de>

	PR middle-end/18041
	* simplify-rtx.c (simplify_binary_operation_1): Add pattern
	matching bitfield insertion.

2018-11-06  Alexandre Oliva <aoliva@redhat.com>

	* auto-inc-dec.c: Include valtrack.h.  Improve comments.
	(reg_next_debug_use): New.
	(attempt_change): Propagate adjusted expression into affected
	debug insns.
	(merge_in_block): Track uses in debug insns.
	(pass_inc_dec::execute): Allocate and release
	reg_next_debug_use.

2018-11-06 Wei Xiao <wei3.xiao@intel.com>

	* config/i386/avx512fintrin.h: Update VFIXUPIMM* intrinsics.
	(_mm512_fixupimm_round_pd): Update parameters and builtin.
	(_mm512_maskz_fixupimm_round_pd): Ditto.
	(_mm512_fixupimm_round_ps): Ditto.
	(_mm512_maskz_fixupimm_round_ps): Ditto.
	(_mm_fixupimm_round_sd): Ditto.
	(_mm_maskz_fixupimm_round_sd): Ditto.
	(_mm_fixupimm_round_ss): Ditto.
	(_mm_maskz_fixupimm_round_ss): Ditto.
	(_mm512_fixupimm_pd): Ditto.
	(_mm512_maskz_fixupimm_pd): Ditto.
	(_mm512_fixupimm_ps): Ditto.
	(_mm512_maskz_fixupimm_ps): Ditto.
	(_mm_fixupimm_sd): Ditto.
	(_mm_maskz_fixupimm_sd): Ditto.
	(_mm_fixupimm_ss): Ditto.
	(_mm_maskz_fixupimm_ss): Ditto.
	(_mm512_mask_fixupimm_round_pd): Update builtin.
	(_mm512_mask_fixupimm_round_ps): Ditto.
	(_mm_mask_fixupimm_round_sd): Ditto.
	(_mm_mask_fixupimm_round_ss): Ditto.
	(_mm512_mask_fixupimm_pd): Ditto.
	(_mm512_mask_fixupimm_ps): Ditto.
	(_mm_mask_fixupimm_sd): Ditto.
	(_mm_mask_fixupimm_ss): Ditto.
	* config/i386/avx512vlintrin.h:
	(_mm256_fixupimm_pd): Update parameters and builtin.
	(_mm256_maskz_fixupimm_pd): Ditto.
	(_mm256_fixupimm_ps): Ditto.
	(_mm256_maskz_fixupimm_ps): Ditto.
	(_mm_fixupimm_pd): Ditto.
	(_mm_maskz_fixupimm_pd): Ditto.
	(_mm_fixupimm_ps): Ditto.
	(_mm_maskz_fixupimm_ps): Ditto.
	(_mm256_mask_fixupimm_pd): Update builtin.
	(_mm256_mask_fixupimm_ps): Ditto.
	(_mm_mask_fixupimm_pd): Ditto.
	(_mm_mask_fixupimm_ps): Ditto.
	* config/i386/i386-builtin-types.def: Add new types and remove useless ones.
	* config/i386/i386-builtin.def: Update builtin definitions.
	* config/i386/i386.c: Handle new builtin types and remove useless ones.
	* config/i386/sse.md: Update VFIXUPIMM* patterns.
	(<avx512>_fixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(<avx512>_fixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(<avx512>_fixupimm<mode>_mask<round_saeonly_name>): Update.
	(avx512f_sfixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(avx512f_sfixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(avx512f_sfixupimm<mode>_mask<round_saeonly_name>): Update.
	* config/i386/subst.md:
	(round_saeonly_sd_mask_operand4): Add new subst_attr.
	(round_saeonly_sd_mask_op4): Ditto.
	(round_saeonly_expand_operand5): Ditto.
	(round_saeonly_expand): Update.

2018-11-05  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/uclinux.h (XTENSA_ALWAYS_PIC): Change to 0.

2018-11-05  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/87871
	* combine.c (make_more_copies): Skip if dest is frame_pointer_rtx.

2018-11-05  Paul Koning  <ni1d@arrl.net>

	* doc/sourcebuild.texi (target attributes): Document new "inf"
	effective target keyword.

2018-11-05  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/s390.c (s390_register_move_cost): Increase costs for
        moves involving the CC reg.

2018-11-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87873
	* tree-ssa-loop-manip.h (split_loop_exit_edge): Add copy_constants_p
	argument.
	* tree-ssa-loop-manip.c (split_loop_exit_edge): Likewise.
	* tree-vect-loop.c (vect_transform_loop): When splitting the
	loop exit also create forwarder PHIs for constants.
	* tree-vect-loop-manip.c (slpeel_duplicate_current_defs_from_edges):
	Handle constant to_arg, add extra checking we match up the correct
	PHIs.

2018-11-05  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/s390.md: QImode and HImode for load on condition.

2018-11-05  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/predicates.md: Fix typo.
	* config/s390/s390.md: Allow immediates for load on condition.

2018-11-05  Martin Liska  <mliska@suse.cz>

	* alloc-pool.h (struct pool_usage): Use SIZE_AMOUNT.
	* bitmap.h (struct bitmap_usage): Likewise.
	* ggc-common.c (SCALE): Remove.
	(LABEL): Likewise.
	(struct ggc_usage): Use SIZE_AMOUNT. And update
	compare method.
	* ggc-page.c (SCALE): Remove.
	(STAT_LABEL): Remove.
	(ggc_print_statistics): Use SIZE_AMOUNT.
	* gimple.h (SCALE): Remove.
	(LABEL): Likewise.
	* input.c (ONE_K): Remove.
	(ONE_M): Likewise.
	(SCALE): Likewise.
	(STAT_LABEL): Likewise.
	(FORMAT_AMOUNT): Likewise.
	(dump_line_table_statistics): Use SIZE_AMOUNT.
	* mem-stats.h (struct mem_usage): Likewise.
	* rtl.c (dump_rtx_statistics): Likewise.
	(rtx_alloc_counts): Change type to size_t.
	(rtx_alloc_sizes): Likewise.
	(rtx_count_cmp): New.
	(dump_rtx_statistics): Sort first based on counts.
	* tree.c (tree_nodes_cmp): New.
	(tree_codes_cmp): New.
	(dump_tree_statistics): Sort first based on counts.
	* system.h (ONE_K): New.
	(ONE_M): Likewise.
	(SIZE_SCALE): Likewise.
	(SIZE_LABEL): Likewise.
	(SIZE_AMOUNT): Likewise.
	* tree-cfg.c (dump_cfg_stats): Use SIZE_AMOUNT.
	* tree-dfa.c (dump_dfa_stats): Likewise.
	* tree-phinodes.c (phinodes_print_statistics): Likewise.
	* tree-ssanames.c (ssanames_print_statistics): Likewise.
	* tree.c (dump_tree_statistics): Likewise.
	* vec.c (struct vec_usage): Likewise.
	* trans-mem.c (tm_mangle): Enlarge buffer in order to not
	trigger a -Werror=format-overflow with
	--enable-gather-detailed-stats.

2018-11-05  Martin Liska  <mliska@suse.cz>

	* mem-stats.h (mem_alloc_description::release_instance_overhead):
	Return T *.
	* vec.c (struct vec_usage): Register m_element_size.
	(vec_prefix::register_overhead): New arguments: elements and
	element_size.
	(vec_prefix::release_overhead): Subtract elements.
	* vec.h (struct vec_prefix): Change signature.
	(va_heap::reserve): Pass proper arguments.
	(va_heap::release): Likewise.

2018-11-05  Martin Liska  <mliska@suse.cz>

	* mem-stats.h (mem_alloc_description::get_list): Fix GNU coding
	style.
	* vec.c: Likewise.

2018-11-05  Richard Biener  <rguenther@suse.de>

	* tree-scalar-evolution.h (final_value_replacement_loop): Update
	prototype.
	* tree-scalar-evolution.c (final_value_replacement_loop): Return
	whether anything was done.
	(scev_const_prop): Remove constant propagation part, fold
	remains into ...
	* tree-ssa-loop.c (pass_scev_cprop::execute): ... here.
	(pass_data_scev_cprop): TODO_cleanup_cfg is now done
	conditionally.

2018-11-05  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/87859
	* gimple-ssa-store-merging.c (struct merged_store_group): Add
	only_constants and first_nonmergeable_order members.
	(merged_store_group::merged_store_group): Initialize them.
	(merged_store_group::do_merge): Clear only_constants member if
	adding something other than INTEGER_CST store.
	(imm_store_chain_info::coalesce_immediate_stores): Don't merge
	stores with order >= first_nonmergeable_order.  Use
	merged_store->only_constants instead of always recomputing it.
	Set merged_store->first_nonmergeable_order if we've skipped any
	stores.  Attempt to merge overlapping INTEGER_CST stores that
	we would otherwise skip.

	PR sanitizer/87837
	* match.pd (X + Y < X): Don't optimize if TYPE_OVERFLOW_SANITIZED.

2018-11-05  Xuepeng Guo  <xuepeng.guo@intel.com>

	PR target/87853
	* config/i386/emmintrin.h (__v16qs): New to cope with option
	-funsigned-char.
	(_mm_cmpeq_epi8): Replace __v16qi with __v16qs.
	(_mm_cmplt_epi8): Likewise.
	(_mm_cmpgt_epi8): Likewise.

2018-11-05  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/87852
	* fwprop.c (use_killed_between): Only consider single-defs of the
	use whose definition statement dominates the use.

2018-11-05  Martin Liska  <mliska@suse.cz>

	PR web/87829
	* doc/invoke.texi: Remove options that are
	not disabled with -Os.

2018-11-05  Martin Liska  <mliska@suse.cz>

	PR c/87811
	* doc/extend.texi: Update constrain about the last argument
	of __builtin_expect_with_probability.

2018-11-05  Martin Liska  <mliska@suse.cz>

	PR c/87811
	* predict.c (expr_expected_value_1): Verify
	that last argument is a real constants and emit
	error.

2018-11-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/77698
	* ipa-profile.c (ipa_profile): Adjust hotness threshold
	only in LTO mode.

2018-11-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR tree-optimization/86572
	* builtins.c (c_strlen): Handle negative offsets in a safe way.

2018-11-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR tree-optimization/87672
	* gimple-fold.c (gimple_fold_builtin_stxcpy_chk): Gimplify.
	* tree-ssa-strlen.c (handle_builtin_strcat): Adjust object size.

2018-11-04  Uros Bizjak  <ubizjak@gmail.com>

	PR middle-end/58372
	* cfgexpand.c (pass_expand::execute): Move the call to
	finish_eh_generation in front of the call to expand_stack_alignment.

2018-11-04  Venkataramanan Kumar <venkataramanan.kumar@amd.com>

	* common/config/i386/i386-common.c (processor_alias_table): Add
	znver2 entry.
	* config.gcc (i[34567]86-*-linux* | ...): Add znver2.
	(case ${target}): Add znver2.
	* config/i386/driver-i386.c: (host_detect_local_cpu): Let
	-march=native recognize znver2 processors.
	* config/i386/i386-c.c (ix86_target_macros_internal): Add znver2.
	* config/i386/i386.c (m_znver2): New definition.
	(m_ZNVER): New definition.
	(m_AMD_MULTIPLE): Includes m_znver2.
	(processor_cost_table): Add znver2 entry.
	(processor_target_table): Add znver2 entry.
	(get_builtin_code_for_version): Set priority for
	PROCESSOR_ZNVER2.
	(processor_model): Add M_AMDFAM17H_ZNVER2.
	(arch_names_table): Ditto.
	(ix86_reassociation_width): Include znver2.
	* config/i386/i386.h (TARGET_znver2): New definition.
	(struct ix86_size_cost): Add TARGET_ZNVER2.
	(enum processor_type): Add PROCESSOR_ZNVER2.
	* config/i386/i386.md (define_attr "cpu"): Add znver2.
	* config/i386/x86-tune-costs.h: (processor_costs) Add znver2 costs.
	* config/i386/x86-tune-sched.c: (ix86_issue_rate): Add znver2.
	(ix86_adjust_cost): Add znver2.
	* config/i386/x86-tune.def:  Replace m_ZNVER1 by m_ZNVER.
	* gcc/doc/extend.texi: Add details about znver2.
	* gcc/doc/invoke.texi: Add details about znver2.

2018-11-03  Sandra Loosemore  <sandra@codesourcery.com>

	PR target/87079

	* config/nios2/nios2.c (nios2_rtx_costs): Recognize <mul>sidi3
	pattern.

2018-11-02  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (expand_strncmp_gpr_sequence): Pay
	attention to TARGET_AVOID_XFORM and BYTES_BIG_ENDIAN.

2018-11-02  Richard Earnshaw  <rearnsha@arm.com>

	* config/aarch64/aarch64.c ((aarch64_override_options): Disable
	shrink-wrapping when -mtrack-speculation.

2018-11-02  Richard Biener  <rguenther@suse.de>

	* tree-ssa-coalesce.c (struct coalesce_list): Add obstack member.
	(pop_cost_one_pair): Do not free pair.
	(pop_best_coalesce): Likewise.
	(create_coalesce_list): Initialize obstack.
	(delete_coalesce_list): Free obstack.
	(find_coalesce_pair): Obstack-allocate coalesce pairs.
	(add_cost_one_coalesce): Likewise.
	(struct live_track): Remove bitmap pointer indirections.
	(new_live_track): Adjust.
	(delete_live_track): Likewise.
	(live_track_remove_partition): Likewise.
	(live_track_add_partition): Likewise.
	(live_track_live_p): Likewise.
	(live_track_process_def): Likewise.
	(live_track_clear_base_vars): Likewise.

2018-11-02  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* configure.ac (gcc_cv_as_sparc_register_op): Remove.
	* configure: Regenerate.
	* config.in: Regenerate.
	* config/sparc/sparc.c (sparc_output_scratch_registers): Remove
	HAVE_AS_REGISTER_PSEUDO_OP guard.
	* config/sparc/sparc.h (ASM_ARCH64_SPEC): Remove
	!HAVE_AS_REGISTER_PSEUDO_OP support.
	(ASM_DECLARE_REGISTER_GLOBAL): Remove HAVE_AS_REGISTER_PSEUDO_OP
	guard.

2018-11-02  Richard Biener  <rguenther@suse.de>

	* dwarf2out.c (build_abbrev_table): Guard lookup_external_ref call
	with is_type_die.

2018-11-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87776
	* tree-ssa-sccvn.c (do_rpo_vn): Do not mark backedges
	executable when iterating but running into rpo-vn-max-loop-depth
	and not eliding the iteration.

2018-11-30  Jan Hubicka  <jh@suse.cz>

	* tree.c (free_lang_data_in_decl): Free TREE_TYPE and alignment of
	TYPE_DECL.

2018-11-01  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-protos.h (rs6000_address_for_fpconvert): Remove
	prototype.
	* config/rs6000/rs6000.c (rs6000_force_indexed_or_indirect_mem):
	Combine with rs6000_address_for_fpconvert.
	(rs6000_address_for_fpconvert): Combine with
	rs6000_force_indexed_or_indirect_mem.
	(rs6000_expand_vector_init): Change function call from
	rs6000_address_for_fpconvert to rs6000_force_indexed_or_indirect_mem.
	* config/rs6000/rs6000.md (floatsi<mode>2_lfiwax): Change call from
	rs6000_address_for_fpconvert to rs6000_force_indexed_or_indirect_mem.
	(floatsi<mode>2_lfiwax_mem): Ditto.
	(floatunssi<mode>2_lfiwzx): Ditto.
	(floatunssi<mode>2_lfiwzx_mem): Ditto.
	(float<QHI:mode><FP_ISA3:mode>2): Ditto.
	(floatuns<QHI:mode><FP_ISA3:mode>2): Ditto.
	(fix_trunc<mode>si2_stfiwx): Ditto.
	(fixuns_trunc<mode>si2_stfiwx): Ditto.
	(float_<mode>si2_hw): Ditto.
	(floatuns_<mode>si2_hw): Ditto.
	* config/rs6000/vsx.md (*vsx_extract_si): Ditto.
	(vsx_splat_<mode>): Ditto.

2018-11-01  Joseph Myers  <joseph@codesourcery.com>

	* configure.ac (gcc_cv_as_ia64_ltoffx_ldxmov_relocs): Add newline
	at end of assembler input text.
	* configure: Regenerate.

2018-11-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/87826
	* gimple-ssa-store-merging.c (do_shift_rotate): Punt if count is
	negative or larger or equal to type's precision.

2018-10-31  Alexandre Oliva <aoliva@redhat.com>

	* opts.c (default_options_table): Do not enable
	OPT_fdelayed_branch at -Og.
	* doc/invoke.texi (-fdelayed-branch): Document it.

2018-10-31  Richard Henderson  <richard.henderson@linaro.org>

	* optabs-libfuncs.c (build_libfunc_function_visibility):
	New, split out from...
	(build_libfunc_function): ... here.
	(init_one_libfunc_visibility): New, split out from ...
	(init_one_libfunc): ... here.

	* config/aarch64/atomics.md (aarch64_atomic_<ATOMIC_LDOP><ALLI>_lse):
	scratch register need not be early-clobber.  Document the reason
	why we cannot use ST<OP>.

2018-10-31  Joseph Myers  <joseph@codesourcery.com>

	PR bootstrap/82856
	* configure.ac: Remove AC_PREREQ.  Use AC_LANG_SOURCE.  Use single
	line for second argument of AC_DEFINE_UNQUOTED.
	* doc/install.texi (Tools/packages necessary for modifying GCC):
	Update to autoconf 2.69 and automake 1.15.1.
	* aclocal.m4, config.in, configure: Regenerate.

2018-10-31  Pat Haugen  <pthaugen@us.ibm.com>

	* tree-ssa-loop-ivcanon.c (try_peel_loop): Fix typo and remove dead
	initialization.

2018-10-31  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* common/config/aarch64/aarch64-common.c (aarch64_parse_extension):
	Add new argument invalid_extension.
	(aarch64_get_all_extension_candidates): New function.
	(aarch64_rewrite_selected_cpu): Add NULL to function call.
	* config/aarch64/aarch64-protos.h (aarch64_parse_extension): Add
	new argument.
	(aarch64_get_all_extension_candidates): New function.
	* config/aarch64/aarch64.c (aarch64_parse_arch): Add new
	argument invalid_extension.
	(aarch64_parse_cpu): Likewise.
	(aarch64_print_hint_for_extensions): New function.
	(aarch64_validate_mcpu): Provide hint about invalid extension.
	(aarch64_validate_march): Likewise.
	(aarch64_handle_attr_arch): Pass new argument.
	(aarch64_handle_attr_cpu): Provide hint about invalid extension.
	(aarch64_handle_attr_isa_flags): Likewise.

2018-10-31  Richard Biener  <rguenther@suse.de>

	PR middle-end/70359
	PR middle-end/86270
	* tree-outof-ssa.c (insert_backedge_copies): Restrict
	copy generation to useful cases.  Place the copy before
	the definition of the backedge value when possible.

2018-10-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-arch.h (ARC_TUNE_ARC7XX): New tune value.
	* config/arc/arc.c (arc_active_insn): New function.
	(check_store_cacheline_hazard): Likewise.
	(workaround_arc_anomaly): Use check_store_cacheline_hazard.
	(arc_override_options): Disable delay slot scheduler for older
	A7.
	(arc_store_addr_hazard_p): New implementation, old one renamed to
	...
	(arc_store_addr_hazard_internal_p): Renamed.
	(arc_reorg): Don't combine into brcc instructions which are part
	of hardware hazard solution.
	* config/arc/arc.md (attr tune): Consider new arc7xx tune value.
	(tune_arc700): Likewise.
	* config/arc/arc.opt (arc7xx): New tune value.
	* config/arc/arc700.md: Improve A7 scheduler.

2018-10-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_override_options): Remove
	TARGET_COMPACT_CASESI.
	* config/arc/arc.h (ASM_OUTPUT_ADDR_DIFF_ELT): Update.
	(CASE_VECTOR_MODE): Likewise.
	(CASE_VECTOR_PC_RELATIVE): Likewise.
	(CASE_VECTOR_SHORTEN_MODE): Likewise.
	(CASE_VECTOR_SHORTEN_MODE1): Delete.
	(ADDR_VEC_ALIGN): Update.
	(ASM_OUTPUT_CASE_LABEL): Undefine.
	(ASM_OUTPUT_BEFORE_CASE_LABEL): Undefine.
	(TARGET_BI_BIH): Define.
	(DEFAULT_BRANCH_INDEX): Likewise.
	* config/arc/arc.md (casesi): Rework to accept BI/BIH
	instructions, remove compact_casesi use case.
	(casesi_compact_jump): Remove.
	(casesi_dispatch): New pattern.
	* config/arc/arc.opt: Add mbranch-index option. Deprecate
	compact_casesi option.
	* doc/invoke.texi: Document mbranch-index option.

2018-10-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_get_tp): Remove function.
	(arc_emit_call_tls_get_addr): Likewise.
	(arc_call_tls_get_addr): New function.
	(arc_legitimize_tls_address): Make use of arc_call_tls_get_addr.
	* config/arc/arc.md (tls_load_tp_soft): Remove.
	(tls_gd_get_addr): Likewise.

2018-10-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (mulsi3): Remove call to mulsi_600_lib.
	(mulsi3_600_lib): Remove pattern.
	(umulsi3_highpart_600_lib_le): Likewise.
	(umulsi3_highpart): Remove call to umulsi3_highpart_600_lib_le.
	(umulsidi3): Remove call to umulsidi3_600_lib.
	(umulsidi3_600_lib): Remove pattern.
	(peephole2): Remove peephole using the above deprecated patterns.

2018-10-31  Thomas Preud'homme  <thomas.preudhomme@linaro.org>

	PR target/87374
	* config/arm/arm.c (arm_option_check_internal): Disable the combined
	use of -mslow-flash-data and -mword-relocations.
	(arm_option_override): Enable -mword-relocations if -fpic or -fPIC.
	* config/arm/arm.md (SYMBOL_REF MOVT splitter): Stop checking for
	flag_pic.
	* doc/invoke.texi (-mword-relocations): Mention conflict with
	-mslow-flash-data.
	(-mslow-flash-data): Reciprocally.

2018-10-31  Richard Henderson  <richard.henderson@linaro.org>

	* config/aarch64/aarch64.c (aarch64_hard_regno_mode_ok): Force
	16-byte modes held in GP registers to use an even regno.

	* config/aarch64/aarch64.c (aarch64_emit_bic): Remove.
	(aarch64_atomic_ldop_supported_p): Remove.
	(aarch64_gen_atomic_ldop): Remove.
	* config/aarch64/atomic.md (atomic_<atomic_optab><ALLI>):
	Fully expand LSE operations here.
	(atomic_fetch_<atomic_optab><ALLI>): Likewise.
	(atomic_<atomic_optab>_fetch<ALLI>): Likewise.
	(aarch64_atomic_<ATOMIC_LDOP><ALLI>_lse): Drop atomic_op iterator
	and use ATOMIC_LDOP instead; use register_operand for the input;
	drop the split and emit insns directly.
	(aarch64_atomic_fetch_<ATOMIC_LDOP><ALLI>_lse): Likewise.
	(aarch64_atomic_<atomic_op>_fetch<ALLI>_lse): Remove.
	(@aarch64_atomic_load<ATOMIC_LDOP><ALLI>): Remove.

	* config/aarch64/aarch64.c (aarch64_emit_atomic_swap): Remove.
	(aarch64_gen_atomic_ldop): Don't call it.
	* config/aarch64/atomics.md (atomic_exchange<ALLI>):
	Use aarch64_reg_or_zero.
	(aarch64_atomic_exchange<ALLI>): Likewise.
	(aarch64_atomic_exchange<ALLI>_lse): Remove split; remove & from
	operand 0; use aarch64_reg_or_zero for input; merge ...
	(@aarch64_atomic_swp<ALLI>): ... this and remove.

	* config/aarch64/aarch64.c (aarch64_gen_compare_reg_maybe_ze): New.
	(aarch64_split_compare_and_swap): Use it.
	(aarch64_expand_compare_and_swap): Likewise.  Remove convert_modes;
	test oldval against the proper predicate.
	* config/aarch64/atomics.md (@atomic_compare_and_swap<ALLI>):
	Use nonmemory_operand for expected.
	(cas_short_expected_pred): New.
	(@aarch64_compare_and_swap<SHORT>): Use it; use "rn" not "rI" to match.
	(@aarch64_compare_and_swap<GPI>): Use "rn" not "rI" for expected.
	* config/aarch64/predicates.md (aarch64_plushi_immediate): New.
	(aarch64_plushi_operand): New.

	* config/aarch64/aarch64.c (aarch64_expand_compare_and_swap):
	Force oldval into the rval register for TARGET_LSE; emit the compare
	during initial expansion so that it may be deleted if unused.
	(aarch64_gen_atomic_cas): Remove.
	* config/aarch64/atomics.md (@aarch64_compare_and_swap<SHORT>_lse):
	Change =&r to +r for operand 0; use match_dup for operand 2;
	remove is_weak and mod_f operands as unused.  Drop the split
	and merge with...
	(@aarch64_atomic_cas<SHORT>): ... this pattern's output; remove.
	(@aarch64_compare_and_swap<GPI>_lse): Similarly.
	(@aarch64_atomic_cas<GPI>): Similarly.

2018-10-31  Richard Biener  <rguenther@suse.de>

	* tree-eh.c (replace_trapping_overflow): Simplify ABS_EXPR case
	using ABSU_EXPR.

2018-10-31 Sameera Deshpande <sameera.deshpande@linaro.org>

	* config/aarch64/aarch64-cores.def (saphira): Use saphira pipeline.
	* config/aarch64/aarch64.md: Include saphira.md
	* config/aarch64/saphira.md: New file for pipeline description.

2018-10-30  Martin Sebor  <msebor@redhat.com>

	PR middle-end/87041
	* gimple-ssa-sprintf.c (format_directive): Use %G to include
	inlining context.
	(sprintf_dom_walker::compute_format_length):
	Avoid setting POSUNDER4K here.
	(get_destination_size): Handle null argument values.
	(get_user_idx_format): New function.
	(sprintf_dom_walker::handle_gimple_call): Handle all printf-like
	functions, including user-defined with attribute format printf.
	Use %G to include inlining context.
	Set POSUNDER4K here.

2018-10-30  Jan Hubicka  <jh@suse.cz>

	* params.def (lto-partitions): Bump from 32 to 128.

2018-10-30  Jan Hubicka  <jh@suse.cz>

	* tree.c
	(free_lang_data_d, add_tree_to_fld_list, fld_worklist_push): Move
	head in file.
	(free_lang_data_in_type): Forward declare.
	(fld_type_variant_equal_p): New function.
	(fld_type_variant): New function
	(fld_incomplete_types): New hash.
	(fld_incomplete_type_of): New function
	(fld_simplfied-type): New function.
	(free_lang_data_in_decl): Add fld parameter; simplify type of FIELD_DECL
	(free_lang_data): Allocate and free fld_incomplete_type; update call
	of free_lang_data_in_decl.

2018-10-30  Eric Botcazou  <ebotcazou@adacore.com>

	* gcov.c (output_lines): Remove duplicate line.

2018-10-30  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000.md (bswapdi2): Force address into register
	if not in indexed or indirect form.
	(bswapdi2_load): Change predicate to indexed_or_indirect_operand.
	(bswapdi2_store): Ditto.
	* config/rs6000/rs6000.c (rs6000_force_indexed_or_indirect_mem): New
	helper function.
	* config/rs6000/rs6000-protos.h (rs6000_force_indexed_or_indirect_mem):
	Prototype for helper function.

2018-10-30  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (optimize): Clarify/expand attribute documentation.
	(target, pragma GCC optimize, pragma GCC target): Ditto.

2018-10-30  Jonathan Wakely  <jwakely@redhat.com>

	* doc/extend.texi: Fix prototype and description of
	__builtin_expect_with_probability.

2018-10-30  Michael Ploujnikov  <michael.ploujnikov@oracle.com>

	* cgraph.h (clone_function_name_1): Replaced by new
	  clone_function_name_numbered that takes name as string; for
	  privatize_symbol_name_1 use only.
	  (clone_function_name): Renamed to
	  clone_function_name_numbered to be explicit about numbering.
	  (clone_function_name): New two-argument function that does
	  not number its output.
	  (clone_function_name): New three-argument function that
	  takes a number to append to its output.
	* cgraphclones.c (duplicate_thunk_for_node):
	  (clone_function_name_1): Renamed.
	  (clone_function_name_numbered): Two new functions.
	  (clone_function_name): Improved documentation.
	  (cgraph_node::create_virtual_clone): Use clone_function_name_numbered.
	* config/rs6000/rs6000.c (make_resolver_func): Ditto.
	* final.c (final_scan_insn_1): Use the new clone_function_name
	  without numbering.
	* multiple_target.c (create_dispatcher_calls): Ditto.
	  (create_target_clone): Ditto.
	* omp-expand.c (grid_expand_target_grid_body): Ditto.
	* omp-low.c (create_omp_child_function_name): Ditto.
	* omp-simd-clone.c (simd_clone_create): Ditto.
	* symtab.c (simd_symtab_node::noninterposable_alias): Use the
	  new clone_function_name without numbering.

2018-10-30  Richard Earnshaw  <rearnsha@arm.com>

	* alloc-pool.h (base_pool_allocator <TBlockAllocator>::initialize):
	Assert that the allocation size is not zero.

2018-10-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87800
	* tree-vect-slp.c (vect_build_slp_tree_2): Reject any
	non-induction or reduction PHIs.

2018-10-30 Sameera Deshpande <sameera.deshpande@linaro.org

	* config/aarch64/falkor-tag-collision-avoidance.c
	(execute_tag_collision_avoidance): Call df_note_add_problem.

2018-10-30  Martin Liska  <mliska@suse.cz>

	* doc/extend.texi: Fix typo in documentation
	of __builtin_expect_with_probability.

2018-10-29  David Malcolm  <dmalcolm@redhat.com>

	PR c++/87721
	* input.c (get_substring_ranges_for_loc): Detect if
	linemap_resolve_location gives us a NULL map, and reject
	this case.

2018-10-29  Iain Buclaw  <ibuclaw@gdcproject.org>

	* config.gcc (xstormy16-*-elf): Set tm_d_file.

2018-10-29  David Malcolm  <dmalcolm@redhat.com>
	    Martin Sebor  <msebor@redhat.com>
	    Manuel Lopez-Ibanez  <manu@gcc.gnu.org>

	* doc/ux.texi (Quoting): New subsection, adapted from material at
	https://gcc.gnu.org/wiki/DiagnosticsGuidelines written by
	MartinSebor and ManuelLopezIbanez.
	(Fix-it hints): Note that fix-it hints shouldn't be marked for
	translation.

2018-10-29  Kugan Vivekanandarajah  <kuganv@linaro.org>

	PR middle-end/87469
	* tree-ssa-loop-niter.c (number_of_iterations_popcount): Fix niter
	max value.

2018-10-29  Paul A. Clarke  <pc@us.ibm.com>

	* gcc.target/powerpc/ssse3-check.h: Remove inaccurate comment.

2018-10-29  Paul Koning  <ni1d@arrl.net>

	* doc/rtl.texi (CONST_WIDE_INT_ELT): Give correct macro name.

2018-10-29  Paul A. Clarke  <pc@us.ibm.com>

	* gcc/config/rs6000/mmintrin.h (_mm_packs_pi16, _mm_packs_pi32,
	_mm_packs_pu16, _mm_unpackhi_pi8, _mm_unpacklo_pi8, _mm_add_pi8,
	_mm_add_pi16, _mm_add_pi32, _mm_sub_pi8, _mm_sub_pi16, _mm_sub_pi32,
	_mm_cmpgt_pi8, _mm_cmpeq_pi16, _mm_cmpgt_pi16, _mm_cmpeq_pi32,
	_mm_cmpgt_pi32, _mm_adds_pi8, _mm_adds_pi16, _mm_adds_pu8,
	_mm_adds_pu16, _mm_subs_pi8, _mm_subs_pi16, _mm_subs_pu8,
	_mm_subs_pu16, _mm_madd_pi16, _mm_mulhi_pi16, _mm_mullo_pi16,
	_mm_sll_pi16, _mm_sra_pi16, _mm_srl_pi16, _mm_set1_pi16, _mm_set1_pi8):
	Change 'vector' to '__vector'.
	* gcc/config/rs6000/xmmintrin.h (_mm_cvtps_pi32, _mm_cvttps_pi32,
	_mm_cvtps_pi16, _mm_cvtps_pi8, _mm_max_pi16, _mm_max_pu8, _mm_min_pi16,
	_mm_min_pu8, _mm_mulhi_pu16, _mm_shuffle_pi16, _mm_avg_pu8,
	_mm_avg_pu16): Likewise.  And, whitespace corrections.

2018-10-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87785
	* tree-vect-slp.c (vect_gather_slp_loads): Only gather
	internal defs.

2018-10-29  Olivier Hainque  <hainque@adacore.com>

	* VXWORKS_NET_LIBS_RTP: New macro, network part of VXWORKS_LIBS_RTP.

2018-10-29  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h (VXWORKS_PERSONALITY): New VxWorks
	ports configuration macro, defaults to "gnu".
	(VXWORKS_OS_CPP_BUILTINS): Use it. Feed TOOL and
	TOOL_FAMILY instead of _VX_TOOL/_VXTOOL_FAMILY.

2018-10-29  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h (CLEAR_INSN_CACHE): #undef before #define.

2018-10-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87790
	* tree-vect-slp.c (vect_mark_slp_stmts): Simplify.
	(vect_make_slp_decision): Adjust.
	(vect_slp_analyze_bb_1): Likewise.
	(vect_detect_hybrid_slp_stmts): Properly union SLP type over
	edges.

2018-10-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87785
	* tree-vect-slp.c (vect_build_slp_tree_2): Remove loads argument
	and processing.
	(vect_build_slp_tree): Likewise.
	(vect_gather_slp_loads): New function.
	(vect_analyze_slp_instance): Gather loads separately from the
	SLP tree build.

2018-10-29  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Make dependency to json.o.
	* doc/gcov.texi: Document new JSON format, remove
	old intermediate format documentation.
	* gcov.c (struct function_info): Come up with m_name and
	m_demangled_name.
	(function_info::function_info): Initialize it.
	(function_info::~function_info): Release it.
	(main): Rename flag_intermediate_format to flag_json_format.
	(print_usage): Describe --json-format.
	(process_args): Set flag_json_format.
	(output_intermediate_line): Remove.
	(output_intermediate_json_line): Likewise.
	(get_gcov_intermediate_filename): Return new extension
	".gcov.json.gz".
	(output_intermediate_file): Implement JSON emission.
	(output_json_intermediate_file): Implement JSON emission.
	(generate_results): Use ::get_name for function name.
	Handle JSON output file.
	(read_graph_file): Use ::get_name instead of cplus_demangle.
	(read_count_file): Likewise.
	(solve_flow_graph): Likewise.
	(add_line_counts): Likewise.
	(accumulate_line_counts): Use new flag_json_format.
	(output_function_details): Use ::get_name instead of cplus_demangle.
	(output_lines): Likewise.
	* json.cc (test_writing_literals): Add new tests.
	* json.h (class literal): Add new boolean constructor.

2018-10-29  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/87701
	PR rtl-optimization/87780
	* combine.c (make_more_copies): Rewrite.

2018-10-28  Kugan Vivekanandarajah  <kuganv@linaro.org>

	* doc/generic.texi (ABSU_EXPR): Document.
	* match.pd (absu(x)*absu(x) -> x*x): Handle.
	(absu(absu(X)) -> absu(X)): Likewise.
	(absu(-X) -> absu(X)): Likewise.
	(absu(X)  where X is nonnegative -> X): Likewise.

2018-10-28  Iain Buclaw  <ibuclaw@gdcproject.org>

	* Makefile.in (tm_d_file_list, tm_d_include_list): New variables.
	(TM_D_H, D_TARGET_DEF, D_TARGET_H, D_TARGET_OBJS): New variables.
	(tm_d.h, cs-tm_d.h, default-d.o): New rules.
	(d/d-target-hooks-def.h, s-d-target-hooks-def-h): New rules.
	(s-tm-texi): Also check timestamp on d-target.def.
	(generated_files): Add TM_D_H and d-target-hooks-def.h.
	(build/genhooks.o): Also depend on D_TARGET_DEF.
	* config.gcc (tm_d_file, d_target_objs, target_has_targetdm): New
	variables.
	* config/aarch64/aarch64-d.c: New file.
	* config/aarch64/aarch64-linux.h (GNU_USER_TARGET_D_CRITSEC_SIZE):
	Define.
	* config/aarch64/aarch64-protos.h (aarch64_d_target_versions): New
	prototype.
	* config/aarch64/aarch64.h (TARGET_D_CPU_VERSIONS): Define.
	* config/aarch64/t-aarch64 (aarch64-d.o): New rule.
	* config/arm/arm-d.c: New file.
	* config/arm/arm-protos.h (arm_d_target_versions): New prototype.
	* config/arm/arm.h (TARGET_D_CPU_VERSIONS): Define.
	* config/arm/linux-eabi.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
	* config/arm/t-arm (arm-d.o): New rule.
	* config/default-d.c: New file.
	* config/glibc-d.c: New file.
	* config/gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
	* config/i386/i386-d.c: New file.
	* config/i386/i386-protos.h (ix86_d_target_versions): New prototype.
	* config/i386/i386.h (TARGET_D_CPU_VERSIONS): Define.
	* config/i386/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
	(GNU_USER_TARGET_D_CRITSEC_SIZE): Define.
	* config/i386/t-i386 (i386-d.o): New rule.
	* config/kfreebsd-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
	* config/kopensolaris-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
	* config/linux-android.h (ANDROID_TARGET_D_OS_VERSIONS): Define.
	* config/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
	* config/mips/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
	* config/mips/mips-d.c: New file.
	* config/mips/mips-protos.h (mips_d_target_versions): New prototype.
	* config/mips/mips.h (TARGET_D_CPU_VERSIONS): Define.
	* config/mips/t-mips (mips-d.o): New rule.
	* config/powerpcspe/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
	* config/powerpcspe/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
	* config/powerpcspe/powerpcspe-d.c: New file.
	* config/powerpcspe/powerpcspe-protos.h (rs6000_d_target_versions):
	New prototype.
	* config/powerpcspe/powerpcspe.c (rs6000_output_function_epilogue):
	Support GNU D by using 0 as the language type.
	* config/powerpcspe/powerpcspe.h (TARGET_D_CPU_VERSIONS): Define.
	* config/powerpcspe/t-powerpcspe (powerpcspe-d.o): New rule.
	* config/riscv/riscv-d.c: New file.
	* config/riscv/riscv-protos.h (riscv_d_target_versions): New
	prototype.
	* config/riscv/riscv.h (TARGET_D_CPU_VERSIONS): Define.
	* config/riscv/t-riscv (riscv-d.o): New rule.
	* config/rs6000/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
	* config/rs6000/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
	* config/rs6000/rs6000-d.c: New file.
	* config/rs6000/rs6000-protos.h (rs6000_d_target_versions): New
	prototype.
	* config/rs6000/rs6000.c (rs6000_output_function_epilogue):
	Support GNU D by using 0 as the language type.
	* config/rs6000/rs6000.h (TARGET_D_CPU_VERSIONS): Define.
	* config/rs6000/t-rs6000 (rs6000-d.o): New rule.
	* config/s390/s390-d.c: New file.
	* config/s390/s390-protos.h (s390_d_target_versions): New prototype.
	* config/s390/s390.h (TARGET_D_CPU_VERSIONS): Define.
	* config/s390/t-s390 (s390-d.o): New rule.
	* config/sparc/sparc-d.c: New file.
	* config/sparc/sparc-protos.h (sparc_d_target_versions): New
	prototype.
	* config/sparc/sparc.h (TARGET_D_CPU_VERSIONS): Define.
	* config/sparc/t-sparc (sparc-d.o): New rule.
	* config/t-glibc (glibc-d.o): New rule.
	* configure: Regenerated.
	* configure.ac (tm_d_file): New variable.
	(tm_d_file_list, tm_d_include_list, d_target_objs): Add substitutes.
	* doc/contrib.texi (Contributors): Add self for the D frontend.
	* doc/frontends.texi (G++ and GCC): Mention D as a supported language.
	* doc/install.texi (Configuration): Mention libphobos as an option for
	--enable-shared.  Mention d as an option for --enable-languages.
	(Testing): Mention check-d as a target.
	* doc/invoke.texi (Overall Options): Mention .d, .dd, and .di as file
	name suffixes.  Mention d as a -x option.
	* doc/sourcebuild.texi (Top Level): Mention libphobos.
	* doc/standards.texi (Standards): Add section on D language.
	* doc/tm.texi: Regenerated.
	* doc/tm.texi.in: Add @node for D language and ABI, and @hook for
	TARGET_CPU_VERSIONS, TARGET_D_OS_VERSIONS, and TARGET_D_CRITSEC_SIZE.
	* dwarf2out.c (is_dlang): New function.
	(gen_compile_unit_die): Use DW_LANG_D for D.
	(declare_in_namespace): Return module die for D, instead of adding
	extra declarations into the namespace.
	(gen_namespace_die): Generate DW_TAG_module for D.
	(gen_decl_die): Handle CONST_DECLSs for D.
	(dwarf2out_decl): Likewise.
	(prune_unused_types_walk_local_classes): Handle DW_tag_interface_type.
	(prune_unused_types_walk): Handle DW_tag_interface_type same as other
	kinds of aggregates.
	* gcc.c (default_compilers): Add entries for .d, .dd and .di.
	* genhooks.c: Include d/d-target.def.

2018-10-28  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/85669
	* config/rs6000/darwin.h (STACK_BOUNDARY): New.
	(RS6000_STARTING_FRAME_OFFSET): Adjust to preserve 16byte alignment.
	(STACK_DYNAMIC_OFFSET): Likewise.

2018-10-27  Sandra Loosemore  <sandra@codesourcery.com>

	PR target/80024
	* config/nios2/nios2.c (nios2_valid_target_attribute_rec): Fix
	error message.

2018-10-26  Tulio Magno Quites Machado Filho  <tuliom@linux.ibm.com>

	* doc/extend.texi (PowerPC builtins): Fix __builtin_unpack_ibm128
	return type and other typos.

2018-10-26  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (expand_strncmp_gpr_sequence): Change to
	a shorter sequence with fewer branches.
	(emit_final_str_compare_gpr): Ditto.

2018-10-26  Paul A. Clarke  <pc@us.ibm.com>

	* config/rs6000/tmmintrin.h: New file.
	* config.gcc (powerpc*-*-*): Add tmmintrin.h to extra_headers.

2018-10-26  Paul A. Clarke  <pc@us.ibm.com>

	* config/rs6000/mmintrin.h: Enable 32bit compilation.
	* config/rs6000/xmmintrin.h: Likewise.

2018-10-26  Paul A. Clarke  <pc@us.ibm.com>

	* config/rs6000/xmmintrin.h (_mm_extract_pi16): Fix for big-endian.

2018-10-26  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_mark_slp_stmts): Add visited hash_set
	and wrapper.
	(vect_mark_slp_stmts_relevant): Likewise.
	(vect_detect_hybrid_slp_stmts): Likewise.
	(vect_bb_slp_scalar_cost): Likewise.
	(vect_remove_slp_scalar_calls): Likewise.

2018-10-26  Jan Hubicka  <jh@suse.cz>

	* ipa-devirt.c (odr_subtypes_equivalent_p): Fix recursion.
	(warn_types_mismatch): Fix walk of DECL_NAME.
	(odr_types_equivalent_p): Fix overactive assert.

2018-10-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87105
	* tree-vectorizer.h (_slp_tree::refcnt): New member.
	* tree-vect-slp.c (vect_free_slp_tree): Decrement and honor
	refcnt.
	(vect_create_new_slp_node): Initialize refcnt to one.
	(bst_traits): Move.
	(scalar_stmts_set_t, bst_fail): Remove.
	(vect_build_slp_tree_2): Add bst_map argument and adjust calls.
	(vect_build_slp_tree): Add bst_map argument and lookup
	already created SLP nodes.
	(vect_print_slp_tree): Handle a SLP graph, print SLP node
	addresses.
	(vect_slp_rearrange_stmts): Handle a SLP graph.
	(vect_analyze_slp_instance): Adjust and free SLP nodes from
	the CSE map.  Fix indenting.
	(vect_schedule_slp_instance): Add short-cut.

2018-10-26  Martin Liska  <mliska@suse.cz>

	PR testsuite/86158
	* ipa-prop.c (struct ipa_vr_ggc_hash_traits): Hash with
	addr_expr and not with pointers.

2018-10-26  Jan Hubicka  <jh@suse.cz>

	* tree.c (free_lang_data_in_type): Only check main variants.
	* ipa-devirt.c (warn_odr): Make static.
	(types_same_for_odr): Drop strict variant.
	(types_odr_comparable): Likewise.
	(odr_or_derived_type_p): Look for main variants.
	(odr_name_hasher::equal): Cleanup comment.
	(odr_subtypes_equivalent): Add warn and warned arguments; check main
	variants.
	(type_variants_equivalent_p): break out from ...
	(odr_types_equivalent): ... here; go for main variants where needed.
	(warn_odr): ... here; turn static.
	(warn_types_mismatch): Compare mangled names of main variants.
	* ipa-utils.h (types_odr_comparable): Drop strict parameter.
	(type_with_linkage_p): Sanity check that we look at main variant.
	* lto.c (lto_read_decls): Only consider main variant to be ODR type.
	* tree.h (types_same_for_odr): Drop strict argument.

2018-10-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87746
	* tree-vect-data-refs.c (vect_update_misalignment_for_peel):
	Simplify and fix WRT strided store groups with size not
	equal to step in element count.
	(vect_analyze_group_access_1): Dump the whole group.

2018-10-25  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-c.c (P9V_BUILTIN_VEC_VSCEDPGT,
	P9V_BUILTIN_VEC_VSCEDPLT, P9V_BUILTIN_VEC_VSCEDPEQ,
	P9V_BUILTIN_VEC_VSCEDPUO): Rename base overloaded name.  Add quad
	precicion entry for each overloaded builtin.
	* config/rs6000/rs6000-builtin.def (VSCEDPGT, VSCEDPLT, VSCEDPEQ,
	VSCEDPUO): Rename overloaded name.
	(VSCEDPGT, VSCEQPGT, VSCEDPLT, VSCEQPLT, VSCEDPEQ, VSCEQPEQ,
	VSCEDPUO, VSCEQPUO): Add defitions for overloaded builtins.
	* config/rs6000/vsx.md (xscmpexpqp_<code>_<mode>): Add
	define_expand for xscmpexqp instruction.
	(*xscmpexpqp): Add define_insn for the xscmpexqp instruction.

2018-10-25  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Jinsong Ji <jji@us.ibm.com>

	* config/rs6000/emmintrin.h (_mm_slli_epi16): Replace deprecated
	function with vec_sl.
	(_mm_slli_epi32): Likewise.
	(_mm_slli_epi64): Likewise.
	(_mm_srai_epi16): Replace deprecated function with vec_sra.
	(_mm_srai_epi32): Likewise.
	(_mm_srli_epi16): Replace deprecated function with vec_sr.
	(_mm_srli_epi32): Likewise.
	(_mm_srli_epi64): Likewise.
	(_mm_sll_epi16): Replace deprecated function with vec_sl.
	(_mm_sll_epi32): Likewise.
	(_mm_sll_epi64): Likewise.
	(_mm_sra_epi16): Replace deprecated function with vec_sra.
	(_mm_sra_epi32): Likewise.
	(_mm_srl_epi16): Replace deprecated function with vec_sr.
	(_mm_srl_epi32): Likewise.
	(_mm_srl_epi64): Likewise.

2018-10-25  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Jinsong Ji <jji@us.ibm.com>

	* gcc/config/rs6000/emmintrin.h (_mm_sll_epi16): Replace
	comparison operators with vec_cmp* for compatibility due to
	unfortunate history; clean up formatting and use types more
	appropriately.
	(_mm_sll_epi32): Likewise.
	(_mm_sll_epi64): Likewise.
	(_mm_srl_epi16): Likewise.
	(_mm_srl_epi32): Likewise.
	(_mm_srl_epi64): Likewise.

2018-10-25  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Jinsong Ji <jji@us.ibm.com>

	* config/rs6000/emmintrin.h (_mm_sll_epi64): Remove wrong cast.
	* config/rs6000/xmmintrin.h (_mm_min_ps): Change m's type to
	__vector __bool int.  Use vec_cmpgt in preference to deprecated
	function vec_vcmpgtfp.
	(_mm_max_ps): Likewise.

2018-10-25  Jeff Law  <law@redhat.com>

	* config/rl78/rl78.c (insn_ok_now): Always re-recognize the insn
	if returning false.

2018-10-25  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (aligned): Expand attribute description.
	(Alignment): Rename section.  Discuss function arguments.

2018-10-25  Jan Hubicka  <jh@suse.cz>

	* ipa-devirt.c (main_odr_variant): Remove.
	(hash_odr_name, types_same_for_odr, types_odr_comparable,
	odr_name_hasher::equal, odr_subtypes_equivalent_p):
	Drop use of main_odr_variant.
	(add_type_duplicate): Silence confused warnings on integer types.
	(get_odr_type): Always look for main variant.
	(register_odr_type): Simplify.

2018-10-25  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_analyze_data_ref_accesses):
	Initialize ng to silence error with release checking bootstrap.

2018-10-25  Richard Biener  <rguenther@suse.de>

	* tree-if-conv.c: Include tree-ssa-sccvn.h.
	(tree_if_conversion): Run CSE on the if-converted loop body.

2018-10-25  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/constraints.md (ZL): New constraint.
	* config/s390/s390.c (legitimate_pic_operand_p): Accept LARL
	operands.
	* config/s390/s390.md (movdi_larl): Remove.
	(movdi_64): Add the LARL alternative.

2018-10-25  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR bootstrap/87747
	* rtl.c (RTX_CODE_HWINT_P_1): New helper macro.
	(RTX_CODE_HWINT_P): New macro.
	(rtx_code_size): Use RTX_CODE_HWINT_P ().

2018-10-25  Jan Hubicka  <jh@suse.cz>

	* ipa-devirt.c (odr_types_equivalent_p): Do not ICE if one of types
	is anonymous.

2018-10-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87665
	PR tree-optimization/87745
	* tree-vectorizer.h (get_earlier_stmt): Remove.
	(get_later_stmt): Pick up UID from the original non-pattern stmt.

2018-10-25  Sam Tebbs  <sam.tebbs@arm.com>

	* options.texi (Deprecated): Move list to Var section.

2018-10-24  Bill Schmidt  <wschmidt@linux.ibm.com>
            Jinsong Ji <jji@us.ibm.com>

        * config/rs6000/emmintrin.h (_mm_cvtpd_epi32): Change deprecated
        __vector long to __vector long long.
        (_mm_cvtpd_ps): Likewise.
        (_mm_cvttpd_epi32): Likewise.
        (_mm_cvtpi32_pd): Likewise.
        (_mm_unpackhi_epi64): Likewise.
        (_mm_unpacklo_epi64): Likewise.

2018-10-24  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/87720
	* combine.c (make_more_copies): Skip if the dest is pc_rtx.

2018-10-24  Alexandre Oliva <aoliva@redhat.com>

	* gimple-ssa-isolate-paths.c
	(find_implicit_erroneous_behavior): Do not change code if the
	pass is running for warnings only.
	(find_explicit_erroneous_behavior): Likewise.

2018-10-24  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (TARGET_MANGLE_DECL_ASSEMBLER_NAME):
	Define as rs6000_mangle_decl_assembler_name.
	(rs6000_mangle_decl_assembler_name): If the user switched from IBM
	long double to IEEE long double, switch the names of the long
	double built-in functions to be <func>f128 instead of <func>l.

2018-10-24  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (nonnull): List no-argument form.  Reference
	-fno-delete-null-pointer-checks and -fisolate-erroneous-paths-attribute.

2018-10-24  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (do_rpo_vn): Free rpo_state.

2018-10-24  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/84436
	* tree-switch-conversion.c (switch_conversion::contains_same_values_p):
	Remove.
	(switch_conversion::contains_linear_function_p): New.
	(switch_conversion::build_one_array): Support linear
	transformation on input.
	* tree-switch-conversion.h (struct switch_conversion): Add
	contains_linear_function_p declaration.

2018-10-24  Richard Biener  <rguenther@suse.de>

	* varasm.c (const_hash_1): Return hash of ADDR_EXPR
	if its argument is CONSTANT_CLASS_P.

2018-10-11  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-utils.h (type_with_linkage_p): No longer check for TYPE_STUB_DECL;
	it is wrong for forward declarations.

2018-10-24  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_check_qrst_address): Add the missing
	SYMBOL_REF_P () check.

2018-10-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87105
	* tree-vect-data-refs.c (vect_analyze_group_access_1): Adjust
	dump classification.
	(vect_analyze_data_ref_accesses): Handle duplicate loads and
	stores by splitting the affected group after the fact.
	* tree-vect-slp.c (vect_build_slp_tree_2): Dump when we
	fail the SLP build because of size constraints.

2018-10-24  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* configure.ac (gcc_cv_ld_aligned_shf_merge): New test.
	* configure: Regenerate.
	* config.in: Regenerate.
	* varasm.c (mergeable_string_section): Use readonly_data_section
	if linker doesn't support SHF_MERGE with alignment > 8.
	(mergeable_constant_section): Likewise.

2018-10-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84013
	* tree-ssa-structalias.c (struct msdi_data): New struct for
	marshalling data to walk_stmt_load_store_ops.
	(maybe_set_dependence_info): Refactor as callback for
	walk_stmt_load_store_ops.
	(compute_dependence_clique): Set restrict info on all stmt kinds.

2018-10-24  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::dump):
	Remove reduntant dumps and make tp_first_run dump more compact.

2018-10-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87665
	* tree-vect-data-refs.c (vect_preserves_scalar_order_p): Adjust
	to reflect reality.

2018-10-12  Jeff Law  <law@redhat.com>

        * config/h8300/h8300.c (h8300_expand_prologue): Fix stm generation
        for H8/S.

2018-10-23  Richard Biener  <rguenther@suse.de>

	* tree-vrp.c (add_assert_info): Guard dump_printf with
	dump_enabled_p.
	* gimple-ssa-evrp-analyze.c
	(evrp_range_analyzer::record_ranges_from_incoming_edge):
	Use value_range::ignore_equivs_equal_p.

2018-10-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87105
	PR tree-optimization/87608
	* passes.def (pass_all_early_optimizations): Add early phi-opt
	after dce.
	* tree-ssa-phiopt.c (value_replacement): Ignore NOPs and predicts in
	addition to debug stmts.
	(tree_ssa_phiopt_worker): Add early_p argument, do only min/max
	and abs replacement early.
	* tree-cfg.c (gimple_empty_block_p): Likewise.

2018-10-23  Richard Earnshaw  <rearnsha@arm.com>

	PR target/86383
	* config.gcc (arm*-*-netbsdelf*): Default to StrongARM if no CPU
	specified to configure.
	(arm*-*-*): Use ARM7TDMI as the target CPU if no default provided.

2018-10-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87700
	* tree-ssa-copy.c (set_copy_of_val): Fix change detection logic.

2018-10-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/87674
	* config/i386/avx512vlintrin.h (_mm_mask_mullo_epi32): Change type of
	second argument from __mmask16 to __mmask8.
	* config/i386/avx512vlbwintrin.h (_mm_mask_packus_epi32,
	_mm_mask_packs_epi32): Likewise.
	* config/i386/avx512pfintrin.h (_mm512_mask_prefetch_i64scatter_ps):
	Likewise.
	(_mm512_mask_prefetch_i64scatter_pd): Likewise.  Formatting fix.

2018-10-23  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (vect_analyze_stmt): Fix typo in comment.

2018-10-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86144
	* tree-vect-stmts.c (vect_analyze_stmt): Prefer -mveclibabi
	over simd attribute.

2018-10-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87693
	* tree-ssa-threadedge.c (thread_around_empty_blocks): Handle
	the case we do not find the taken edge.

2018-10-22  Bill Schmidt  <wschmidt@linux.ibm.com>
            Jinsong Ji  <jji@us.ibm.com>

        * config/rs6000/emmintrin.h (_MM_SHUFFLE2): Comment cleanup.
        (_mm_store_pd): Use unaligned vector type for pointer cast.
        (_mm_maskmoveu_si128): Likewise.
        * config/rs6000/xmmintrin.h (__m128_u): New typedef.
        (_mm_store_ps): Use unaligned vector type for pointer cast.

2018-10-22  Paul Koning  <ni1d@arrl.net>

	* symtab.c (symtab_node::increase_alignment): Correct max
	alignment check.

2018-10-22  Yury Gribov  <tetra2005@gmail.com>

	PR tree-optimization/87633
	* match.pd: Do not generate unordered integer comparisons.

2018-10-22  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/87600
	* combine.c: Add include of expr.h.
	(cant_combine_insn_p): Do not combine moves from any hard non-fixed
	register to a pseudo.
	(make_more_copies): New function, add a copy to a new pseudo after
	the moves from hard registers into pseudos.
	(rest_of_handle_combine): Declare rebuild_jump_labels_after_combine
	later.  Call make_more_copies.

2018-10-22  Andrew Stubbs  <ams@codesourcery.com>

	* lra-constraints.c (process_alt_operands): New local array,
	matching_early_clobber.  Check matching_early_clobber before
	decrementing reject, and set matching_early_clobber after.

2018-10-22  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/87598
	* config/rs6000/rs6000.c (print_operand_address): For unexpected RTL
	call output_addr_const and hope for the best.

2018-10-22  Richard Biener  <rguenther@suse.de>

	* gimple-ssa-evrp-analyze.c
	(evrp_range_analyzer::record_ranges_from_incoming_edge): Be
	smarter about what ranges to use.
	* tree-vrp.c (add_assert_info): Dump here.
	(register_edge_assert_for_2): Instead of here at multiple but
	not all places.

	* gcc.dg/tree-ssa/evrp12.c: New testcase.
	* gcc.dg/predict-6.c: Adjust.
	* gcc.dg/tree-ssa/vrp33.c: Disable EVRP.
	* gcc.dg/tree-ssa/vrp02.c: Likewise.
	* gcc.dg/tree-ssa/cunroll-9.c: Likewise.

2018-10-22  Steven Bosscher <steven@gcc.gnu.org>
	Richard Biener  <rguenther@suse.de>

	* bitmap.h: Update data structure documentation, including a
	description of bitmap views as either linked-lists or splay trees.
	(struct bitmap_element_def): Update comments for splay tree bitmaps.
	(struct bitmap_head_def): Likewise.
	(bitmap_list_view, bitmap_tree_view): New prototypes.
	(bitmap_initialize_stat): Initialize a bitmap_head's indx and
	tree_form fields.
	(bmp_iter_set_init): Assert the iterated bitmaps are in list form.
	(bmp_iter_and_init, bmp_iter_and_compl_init): Likewise.
	* bitmap.c (bitmap_elem_to_freelist): Unregister overhead of a
	released bitmap element here.
	(bitmap_element_free): Remove.
	(bitmap_elt_clear_from): Work on splay tree bitmaps.
	(bitmap_list_link_element): Renamed from bitmap_element_link.  Move
	this function similar ones such that linked-list bitmap implementation
	functions are grouped.
	(bitmap_list_unlink_element): Renamed from bitmap_element_unlink,
	and moved for grouping.
	(bitmap_list_insert_element_after): Renamed from
	bitmap_elt_insert_after, and moved for grouping.
	(bitmap_list_find_element): New function spliced from bitmap_find_bit.
	(bitmap_tree_link_left, bitmap_tree_link_right,
	bitmap_tree_rotate_left, bitmap_tree_rotate_right, bitmap_tree_splay,
	bitmap_tree_link_element, bitmap_tree_unlink_element,
	bitmap_tree_find_element): New functions for splay-tree bitmap
	implementation.
	(bitmap_element_link, bitmap_element_unlink, bitmap_elt_insert_after):
	Renamed and moved, see above entries.
	(bitmap_tree_listify_from): New function to convert part of a splay
	tree bitmap to a linked-list bitmap.
	(bitmap_list_view): Convert a splay tree bitmap to linked-list form.
	(bitmap_tree_view): Convert a linked-list bitmap to splay tree form.
	(bitmap_find_bit): Remove.
	(bitmap_clear, bitmap_clear_bit, bitmap_set_bit,
	bitmap_single_bit_set_p, bitmap_first_set_bit, bitmap_last_set_bit):
	Handle splay tree bitmaps.
	(bitmap_copy, bitmap_count_bits, bitmap_and, bitmap_and_into,
	bitmap_elt_copy, bitmap_and_compl, bitmap_and_compl_into,
	bitmap_compl_and_into, bitmap_elt_ior, bitmap_ior, bitmap_ior_into,
	bitmap_xor, bitmap_xor_into, bitmap_equal_p, bitmap_intersect_p,
	bitmap_intersect_compl_p, bitmap_ior_and_compl,
	bitmap_ior_and_compl_into, bitmap_set_range, bitmap_clear_range,
	bitmap_hash): Reject trying to act on splay tree bitmaps.  Make
	corresponding changes to use linked-list specific bitmap_element
	manipulation functions as applicable for efficiency.
	(bitmap_tree_to_vec): New function.
	(debug_bitmap_elt_file): New function split out from ...
	(debug_bitmap_file): ... here.  Handle splay tree bitmaps.
	(bitmap_print): Likewise.

	PR tree-optimization/63155
	* tree-ssa-propagate.c (ssa_prop_init): Use tree-view for the
	SSA edge worklists.
	* tree-ssa-coalesce.c (coalesce_ssa_name): Populate used_in_copies
	in tree-view.

2018-10-22  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/87686
	Revert
	2018-08-29  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (switch_conversion::expand):
	Strenghten assumption about gswitch statements.

2018-10-22  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_item::compare_attributes): Remove.
	(sem_item::compare_referenced_symbol_properties): Use
	attribute_list_equal instead.
	(sem_function::equals_wpa): Likewise.
	* ipa-icf.h: Remove compare_attributes.

2018-10-22  Richard Biener  <rguenther@suse.de>

	PR middle-end/87682
	* mem-stats.h (mem_usage::operator==): Fix pasto.

2018-10-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87640
	* tree-vrp.c (set_value_range_with_overflow): Decompose
	incomplete result.
	(extract_range_from_binary_expr_1): Adjust.

2018-10-22  Martin Jambor  <mjambor@suse.cz>

	* tree-eh.h (stmt_could_throw_p): Add function parameter.
	(stmt_can_throw_external): Likewise.
	(stmt_can_throw_internal): Likewise.
	* tree-eh.c (lower_eh_constructs_2): Pass cfun to stmt_could_throw_p.
	(lower_eh_constructs_2): Likewise.
	(stmt_could_throw_p): Add fun parameter, use it instead of cfun.
	(stmt_can_throw_external): Likewise.
	(stmt_can_throw_internal): Likewise.
	(maybe_clean_eh_stmt_fn): Pass cfun to stmt_could_throw_p.
	(maybe_clean_or_replace_eh_stmt): Pass cfun to stmt_could_throw_p.
	(maybe_duplicate_eh_stmt_fn): Pass new_fun to stmt_could_throw_p.
	(maybe_duplicate_eh_stmt): Pass cfun to stmt_could_throw_p.
	(pass_lower_eh_dispatch::execute): Pass cfun to
	stmt_can_throw_external.
	(cleanup_empty_eh): Likewise.
	(verify_eh_edges): Pass cfun to stmt_could_throw_p.
	* cgraph.c (cgraph_edge::set_call_stmt): Pass a function to
	stmt_can_throw_external instead of pushing it to cfun.
	(symbol_table::create_edge): Likewise.
	* gimple-fold.c (fold_builtin_atomic_compare_exchange): Pass cfun to
	stmt_can_throw_internal.
	* gimple-ssa-evrp.c (evrp_dom_walker::before_dom_children): Pass cfun
	to stmt_could_throw_p.
	* gimple-ssa-store-merging.c (handled_load): Pass cfun to
	stmt_can_throw_internal.
	(pass_store_merging::execute): Likewise.
	* gimple-ssa-strength-reduction.c
	(find_candidates_dom_walker::before_dom_children): Pass cfun to
	stmt_could_throw_p.
	* gimplify-me.c (gimple_regimplify_operands): Pass cfun to
	stmt_can_throw_internal.
	* ipa-pure-const.c (check_call): Pass cfun to stmt_could_throw_p and
	to stmt_can_throw_external.
	(check_stmt): Pass cfun to stmt_could_throw_p.
	(check_stmt): Pass cfun to stmt_can_throw_external.
	(pass_nothrow::execute): Likewise.
	* trans-mem.c (expand_call_tm): Pass cfun to stmt_can_throw_internal.
	* tree-cfg.c (is_ctrl_altering_stmt): Pass cfun to
	stmt_can_throw_internal.
	(verify_gimple_in_cfg): Pass cfun to stmt_could_throw_p.
	(stmt_can_terminate_bb_p): Pass cfun to stmt_can_throw_external.
	(gimple_purge_dead_eh_edges): Pass cfun to stmt_can_throw_internal.
	* tree-complex.c (expand_complex_libcall): Pass cfun to
	stmt_could_throw_p and to stmt_can_throw_internal.
	(expand_complex_multiplication): Pass cfun to stmt_can_throw_internal.
	* tree-inline.c (copy_edges_for_bb): Likewise.
	(maybe_move_debug_stmts_to_successors): Likewise.
	* tree-outof-ssa.c (ssa_is_replaceable_p): Pass cfun to
	stmt_could_throw_p.
	* tree-parloops.c (oacc_entry_exit_ok_1): Likewise.
	* tree-sra.c (scan_function): Pass cfun to stmt_can_throw_external.
	* tree-ssa-alias.c (stmt_kills_ref_p): Pass cfun to
	stmt_can_throw_internal.
	* tree-ssa-ccp.c (optimize_atomic_bit_test_and): Likewise.
	* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Pass cfun to
	stmt_could_throw_p.
	(mark_aliased_reaching_defs_necessary_1): Pass cfun to
	stmt_can_throw_internal.
	* tree-ssa-forwprop.c (pass_forwprop::execute): Likewise.
	* tree-ssa-loop-im.c (movement_possibility): Pass cfun to
	stmt_could_throw_p.
	* tree-ssa-loop-ivopts.c (find_givs_in_stmt_scev): Likewise.
	(add_autoinc_candidates): Pass cfun to stmt_can_throw_internal.
	* tree-ssa-math-opts.c (pass_cse_reciprocals::execute): Likewise.
	(convert_mult_to_fma_1): Likewise.
	(convert_to_divmod): Likewise.
	* tree-ssa-phiprop.c (propagate_with_phi): Likewise.
	* tree-ssa-pre.c (compute_avail): Pass cfun to stmt_could_throw_p.
	* tree-ssa-propagate.c
	(substitute_and_fold_dom_walker::before_dom_children): Likewise.
	* tree-ssa-reassoc.c (suitable_cond_bb): Likewise.
	(maybe_optimize_range_tests): Likewise.
	(linearize_expr_tree): Likewise.
	(reassociate_bb): Likewise.
	* tree-ssa-sccvn.c (copy_reference_ops_from_call): Likewise.
	* tree-ssa-scopedtables.c (hashable_expr_equal_p): Likewise.
	* tree-ssa-strlen.c (adjust_last_stmt): Likewise.
	(handle_char_store): Likewise.
	* tree-vect-data-refs.c (vect_find_stmt_data_reference): Pass cfun to
	stmt_can_throw_internal.
	* tree-vect-patterns.c (check_bool_pattern): Pass cfun to
	stmt_could_throw_p.
	* tree-vect-stmts.c (vect_finish_stmt_generation_1): Likewise.
	(vectorizable_call): Pass cfun to stmt_can_throw_internal.
	(vectorizable_simd_clone_call): Likewise.
	* value-prof.c (gimple_ic): Pass cfun to stmt_could_throw_p.
	(gimple_stringop_fixed_value): Likewise.

2018-10-22  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_loadrelative_operand_p): Accept
	literal pool references.
	(s390_check_qrst_address): Adapt to the new behavior of
	s390_loadrelative_operand_p ().

2018-10-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/sse.md (*andnot<mode>3_bcst): New.

2018-10-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/sse.md (*<code><mode>3_bcst): New.

2018-10-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/sse.md (avx512bcst): Updated for V4SI, V2DI, V8SI,
	V4DI, V16SI and V8DI.
	(*sub<mode>3<mask_name>_bcst): New.
	(*add<mode>3<mask_name>_bcst): Likewise.

2018-10-21  Bill Schmidt  <wschmidt@linux.ibm.com>
            Jinsong Ji  <jji@us.ibm.com>

        * config/rs6000/emmintrin.h (_mm_movemask_pd): Replace __vector
        __m64 with __vector unsigned long long for compatibility.
        (_mm_movemask_epi8): Likewise.
        * config/rs6000/xmmintrin.h (_mm_cvtps_pi32): Likewise.
        (_mm_cvttps_pi32): Likewise.
        (_mm_cvtpi32_ps): Likewise.
        (_mm_cvtps_pi16): Likewise.
        (_mm_loadh_pi): Likewise.
        (_mm_storeh_pi): Likewise.
        (_mm_movehl_ps): Likewise.
        (_mm_movelh_ps): Likewise.
        (_mm_loadl_pi): Likewise.
        (_mm_storel_pi): Likewise.
        (_mm_movemask_ps): Likewise.
        (_mm_shuffle_pi16): Likewise.

2018-10-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/avx512fintrin.h (_mm512_fnmsub_round_pd): Use
	__builtin_ia32_vfnmsubpd512_mask.
	(_mm512_mask_fnmsub_round_pd): Likewise.
	(_mm512_fnmsub_pd): Likewise.
	(_mm512_mask_fnmsub_pd): Likewise.
	(_mm512_maskz_fnmsub_round_pd): Use
	__builtin_ia32_vfnmsubpd512_maskz.
	(_mm512_maskz_fnmsub_pd): Likewise.
	(_mm512_fnmsub_round_ps): Use __builtin_ia32_vfnmsubps512_mask.
	(_mm512_mask_fnmsub_round_ps): Likewise.
	(_mm512_fnmsub_ps): Likewise.
	(_mm512_mask_fnmsub_ps): Likewise.
	(_mm512_maskz_fnmsub_round_ps): Use
	__builtin_ia32_vfnmsubps512_maskz.
	(_mm512_maskz_fnmsub_ps): Likewise.
	* config/i386/avx512vlintrin.h (_mm256_mask_fnmsub_pd): Use
	__builtin_ia32_vfnmsubpd256_mask.
	(_mm256_maskz_fnmsub_pd): Use __builtin_ia32_vfnmsubpd256_maskz.
	(_mm_mask_fnmsub_pd): Use __builtin_ia32_vfmaddpd128_mask
	(_mm_maskz_fnmsub_pd): Use __builtin_ia32_vfnmsubpd128_maskz.
	(_mm256_mask_fnmsub_ps): Use __builtin_ia32_vfnmsubps256_mask.
	(_mm256_mask_fnmsub_ps): Use __builtin_ia32_vfnmsubps256_mask.
	(_mm256_maskz_fnmsub_ps): Use __builtin_ia32_vfnmsubps256_maskz.
	(_mm_mask_fnmsub_ps): Use __builtin_ia32_vfnmsubps128_mask.
	(_mm_maskz_fnmsub_ps): Use __builtin_ia32_vfnmsubps128_maskz.
	* config/i386/fmaintrin.h (_mm_fnmsub_pd): Use
	__builtin_ia32_vfnmsubpd.
	(_mm256_fnmsub_pd): Use __builtin_ia32_vfnmsubpd256.
	(_mm_fnmsub_ps): Use __builtin_ia32_vfnmsubps.
	(_mm256_fnmsub_ps): Use __builtin_ia32_vfnmsubps256.
	(_mm_fnmsub_sd): Use __builtin_ia32_vfnmsubsd3.
	(_mm_fnmsub_ss): Use __builtin_ia32_vfnmsubss3.
	* config/i386/i386-builtin.def: Add
	__builtin_ia32_vfnmsubpd256_mask,
	__builtin_ia32_vfnmsubpd256_maskz,
	__builtin_ia32_vfnmsubpd128_mask,
	__builtin_ia32_vfnmsubpd128_maskz,
	__builtin_ia32_vfnmsubps256_mask,
	__builtin_ia32_vfnmsubps256_maskz,
	__builtin_ia32_vfnmsubps128_mask,
	__builtin_ia32_vfnmsubps128_maskz,
	__builtin_ia32_vfnmsubpd512_mask,
	__builtin_ia32_vfnmsubpd512_maskz,
	__builtin_ia32_vfnmsubps512_mask,
	__builtin_ia32_vfnmsubps512_maskz, __builtin_ia32_vfnmsubss3,
	__builtin_ia32_vfnmsubsd3, __builtin_ia32_vfnmsubps,
	__builtin_ia32_vfnmsubpd, __builtin_ia32_vfnmsubps256 and.
	__builtin_ia32_vfnmsubpd256.
	* config/i386/sse.md (fma4i_fnmsub_<mode>): New.
	(<avx512>_fnmsub_<mode>_maskz<round_expand_name>): Likewise.
	(*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_1):
	Likewise.
	(*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_2):
	Likewise.
	(*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_3):
	Likewise.
	(fmai_vmfnmsub_<mode><round_name>): Likewise.

2018-10-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/avx512fintrin.h (_mm512_fnmadd_round_pd): Use
	__builtin_ia32_vfnmaddpd512_mask.
	(_mm512_mask_fnmadd_round_pd): Likewise.
	(_mm512_fnmadd_pd): Likewise.
	(_mm512_mask_fnmadd_pd): Likewise.
	(_mm512_maskz_fnmadd_round_pd): Use
	__builtin_ia32_vfnmaddpd512_maskz.
	(_mm512_maskz_fnmadd_pd): Likewise.
	(_mm512_fnmadd_round_ps): Use __builtin_ia32_vfnmaddps512_mask.
	(_mm512_mask_fnmadd_round_ps): Likewise.
	(_mm512_fnmadd_ps): Likewise.
	(_mm512_mask_fnmadd_ps): Likewise.
	(_mm512_maskz_fnmadd_round_ps): Use
	__builtin_ia32_vfnmaddps512_maskz.
	(_mm512_maskz_fnmadd_ps): Likewise.
	* config/i386/avx512vlintrin.h (_mm256_mask_fnmadd_pd): Use
	__builtin_ia32_vfnmaddpd256_mask.
	(_mm256_maskz_fnmadd_pd): Use __builtin_ia32_vfnmaddpd256_maskz.
	(_mm_mask_fnmadd_pd): Use __builtin_ia32_vfmaddpd128_mask
	(_mm_maskz_fnmadd_pd): Use __builtin_ia32_vfnmaddpd128_maskz.
	(_mm256_mask_fnmadd_ps): Use __builtin_ia32_vfnmaddps256_mask.
	(_mm256_mask_fnmadd_ps): Use __builtin_ia32_vfnmaddps256_mask.
	(_mm256_maskz_fnmadd_ps): Use __builtin_ia32_vfnmaddps256_maskz.
	(_mm_mask_fnmadd_ps): Use __builtin_ia32_vfnmaddps128_mask.
	(_mm_maskz_fnmadd_ps): Use __builtin_ia32_vfnmaddps128_maskz.
	* config/i386/fmaintrin.h (_mm_fnmadd_pd): Use
	__builtin_ia32_vfnmaddpd.
	(_mm256_fnmadd_pd): Use __builtin_ia32_vfnmaddpd256.
	(_mm_fnmadd_ps): Use __builtin_ia32_vfnmaddps.
	(_mm256_fnmadd_ps): Use __builtin_ia32_vfnmaddps256.
	(_mm_fnmadd_sd): Use __builtin_ia32_vfnmaddsd3.
	(_mm_fnmadd_ss): Use __builtin_ia32_vfnmaddss3.
	* config/i386/i386-builtin.def: Add
	__builtin_ia32_vfnmaddpd256_mask,
	__builtin_ia32_vfnmaddpd256_maskz,
	__builtin_ia32_vfnmaddpd128_mask,
	__builtin_ia32_vfnmaddpd128_maskz,
	__builtin_ia32_vfnmaddps256_mask,
	__builtin_ia32_vfnmaddps256_maskz,
	__builtin_ia32_vfnmaddps128_mask,
	__builtin_ia32_vfnmaddps128_maskz,
	__builtin_ia32_vfnmaddpd512_mask,
	__builtin_ia32_vfnmaddpd512_maskz,
	__builtin_ia32_vfnmaddps512_mask,
	__builtin_ia32_vfnmaddps512_maskz, __builtin_ia32_vfnmaddss3,
	__builtin_ia32_vfnmaddsd3, __builtin_ia32_vfnmaddps,
	__builtin_ia32_vfnmaddpd, __builtin_ia32_vfnmaddps256 and.
	__builtin_ia32_vfnmaddpd256.
	* config/i386/sse.md (fma4i_fnmadd_<mode>): New.
	(<avx512>_fnmadd_<mode>_maskz<round_expand_name>): Likewise.
	(*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_1):
	Likewise.
	(*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_2):
	Likewise.
	(*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_3):
	Likewise.
	(fmai_vmfnmadd_<mode><round_name>): Likewise.

2018-10-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/avx512fintrin.h (_mm512_fmsub_round_pd): Use
	__builtin_ia32_vfmsubpd512_mask.
	(_mm512_mask_fmsub_round_pd): Likewise.
	(_mm512_fmsub_pd): Likewise.
	(_mm512_mask_fmsub_pd): Likewise.
	(_mm512_maskz_fmsub_round_pd): Use
	__builtin_ia32_vfmsubpd512_maskz.
	(_mm512_maskz_fmsub_pd): Likewise.
	(_mm512_fmsub_round_ps): Use __builtin_ia32_vfmsubps512_mask.
	(_mm512_mask_fmsub_round_ps): Likewise.
	(_mm512_fmsub_ps): Likewise.
	(_mm512_mask_fmsub_ps): Likewise.
	(_mm512_maskz_fmsub_round_ps): Use
	__builtin_ia32_vfmsubps512_maskz.
	(_mm512_maskz_fmsub_ps): Likewise.
	* config/i386/avx512vlintrin.h (_mm256_mask_fmsub_pd): Use
	__builtin_ia32_vfmsubpd256_mask.
	(_mm256_maskz_fmsub_pd): Use __builtin_ia32_vfmsubpd256_maskz.
	(_mm_mask_fmsub_pd): Use __builtin_ia32_vfmaddpd128_mask
	(_mm_maskz_fmsub_pd): Use __builtin_ia32_vfmsubpd128_maskz.
	(_mm256_mask_fmsub_ps): Use __builtin_ia32_vfmsubps256_mask.
	(_mm256_mask_fmsub_ps): Use __builtin_ia32_vfmsubps256_mask.
	(_mm256_maskz_fmsub_ps): Use __builtin_ia32_vfmsubps256_maskz.
	(_mm_mask_fmsub_ps): Use __builtin_ia32_vfmsubps128_mask.
	(_mm_maskz_fmsub_ps): Use __builtin_ia32_vfmsubps128_maskz.
	* config/i386/fmaintrin.h (_mm_fmsub_pd): Use
	__builtin_ia32_vfmsubpd.
	(_mm256_fmsub_pd): Use __builtin_ia32_vfmsubpd256.
	(_mm_fmsub_ps): Use __builtin_ia32_vfmsubps.
	(_mm256_fmsub_ps): Use __builtin_ia32_vfmsubps256.
	(_mm_fmsub_sd): Use __builtin_ia32_vfmsubsd3.
	(_mm_fmsub_ss): Use __builtin_ia32_vfmsubss3.
	* config/i386/i386-builtin.def: Add
	__builtin_ia32_vfmsubpd256_mask,
	__builtin_ia32_vfmsubpd256_maskz,
	__builtin_ia32_vfmsubpd128_mask,
	__builtin_ia32_vfmsubpd128_maskz,
	__builtin_ia32_vfmsubps256_mask,
	__builtin_ia32_vfmsubps256_maskz,
	__builtin_ia32_vfmsubps128_mask,
	__builtin_ia32_vfmsubps128_maskz,
	__builtin_ia32_vfmsubpd512_mask,
	__builtin_ia32_vfmsubpd512_maskz,
	__builtin_ia32_vfmsubps512_mask,
	__builtin_ia32_vfmsubps512_maskz, __builtin_ia32_vfmsubss3,
	__builtin_ia32_vfmsubsd3, __builtin_ia32_vfmsubps,
	__builtin_ia32_vfmsubpd, __builtin_ia32_vfmsubps256 and.
	__builtin_ia32_vfmsubpd256.
	* config/i386/sse.md (fma4i_fmsub_<mode>): New.
	(<avx512>_fmsub_<mode>_maskz<round_expand_name>): Likewise.
	(*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_1):
	Likewise.
	(*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_2):
	Likewise.
	(*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_3):
	Likewise.
	(fmai_vmfmsub_<mode><round_name>): Likewise.

2018-10-21  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/sse.md (*<plusminus_insn><mode>3<mask_name>_bcst_1):
	Remove plus.  Renamed to ...
	(*sub<mode>3<mask_name>_bcst): This.
	(*add<mode>3<mask_name>_bcst_2): Renamede to ...
	(*add<mode>3<mask_name>_bcst): This.

2018-10-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/sse.md (*mul<mode>3<mask_name>_bcst): New.

2018-10-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87662
	* i386/avx512vlintrin.h (_mm256_or_epi32): New.
	(_mm_or_epi32): Likewise.
	(_mm256_xor_epi32): Likewise.
	(_mm_xor_epi32): Likewise.
	(_mm256_or_epi64): Likewise.
	(_mm_or_epi64): Likewise.
	(_mm256_xor_epi64): Likewise.
	(_mm_xor_epi64): Likewise.

2018-10-20  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/sse.md (*<avx512>_div<mode>3<mask_name>_bcst): New.

2018-10-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/87647
	* varasm.c (decode_addr_const): Handle COMPOUND_LITERAL_EXPR.

2018-10-20  Andreas Schwab  <schwab@linux-m68k.org>

	* doc/ux.texi: Move @section directly after @node.

2018-10-19  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/85488
	PR middle-end/87649
	* omp-low.c (check_omp_nesting_restrictions): Diagnose ordered without
	depend closely nested inside of loop with ordered clause with
	a parameter.

2018-10-19  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (TEXI_GCCINT_FILES): Add ux.texi.
	* doc/gccint.texi: Include ux.texi and use it in top-level menu.
	* doc/ux.texi: New file.

2018-10-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.h (REG_ALLOC_ORDER): Move 68 (that is, CR0) to
	be the first CR field allocated.

2018-10-19  Richard Biener  <rguenther@suse.de>

	PR target/87657
	* config/i386/i386.c (ix86_builtin_vectorization_cost): Use
	TYPE_VECTOR_SUBPARTS and avoid relying on vector mode.

2018-10-19  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/sse.md
	(*<plusminus_insn><mode>3<mask_name>_bcst_1): New.
	(*add<mode>3<mask_name>_bcst_2): Likewise.

2018-10-19  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/sse.md
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_1):
	Replace nonimmediate_operand with register_operand.
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_2):
	Likewise.
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_3):
	Likewise.

2018-10-19  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR rtl-optimization/87596
	* lra-constraints.c (spill_hard_reg_in_range): Use INSN_P () +
	lra_get_insn_recog_data () instead of lra_insn_recog_data[]
	for instructions in FROM..TO range.

2018-10-19  Eric Botcazou  <ebotcazou@adacore.com>

	* cfgexpand.c (expand_one_var): Use specific wording in error message
	for non-local frame variables.
	* stor-layout.c (layout_decl): Do not issue a warning for them.

2018-10-19  Robin Dapp  <rdapp@linux.ibm.com>

	* haifa-sched.c (priority): Add force_recompute parameter.
	(apply_replacement): Call priority () with force_recompute = true.
	(restore_pattern): Likewise.

2018-10-18  H.J. Lu  <hongjiu.lu@intel.com>

	* simplify-rtx.c (simplify_subreg): Limit mask of vec_merge to
	HOST_BITS_PER_WIDE_INT.
	(test_vector_ops_duplicate): Likewise.

2018-10-18  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/72782
	* config/i386/sse.md (VF_AVX512): New.
	(avx512bcst): Likewise.
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_1):
	Likewise.
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_2):
	Likewise.
	(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_3):
	Likewise.

2018-10-18  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (-dumpversion): Improve grammar.
	(-dumpfullversion): Make more consistent with -dumpversion.

2018-10-18  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (ix86_emit_fp_unordered_jump):
	Set JUMP_LABEL to the jump insn.
	(ix86_emit_i387_log1p): Use ix86_expand_branch to expand branch.
	Predict emitted jump and add label to jump insn.

2018-10-18  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/87562
	* input.c (get_substring_ranges_for_loc): Use
	LRK_SPELLING_LOCATION rather than LRK_MACRO_EXPANSION_POINT when
	getting the linemap for the endpoint.  Verify that it's either
	in the same linemap as the start point's spelling location, or
	at least in the same file.

2018-10-18  Richard Biener  <rguenther@suse.de>

	* config/i386/i386.c (ix86_builtin_vectorization_cost): Do not
	feed width-specific load/store costs through ix86_vec_cost.
	* config/i386/x86-tune-costs.h (athlon_cost): Adjust.
	(k8_cost): Likewise.
	(bdver_cost): Likewise.
	(znver1_cost): Likewise.
	(btver1_cost): Likewise.
	(btver2_cost): Likewise.

2018-10-18  H.J. Lu  <hongjiu.lu@intel.com>

	* simplify-rtx.c (simplify_subreg): Call simplify_gen_subreg
	to simplify subreg of vec_merge.

2018-10-18  Richard Biener  <rguenther@suse.de>

	* config/i386/i386.c: Fix costing of vector FMA.

2018-10-18  Richard Biener  <rguenther@suse.de>

	* config/i386/i386.c (ix86_vec_cost): Remove !parallel path
	and argument.
	(ix86_builtin_vectorization_cost): For vec_construct properly
	cost insertion into SSE regs.
	(...): Adjust calls to ix86_vec_cost.

2018-10-18  Richard Biener  <rguenther@suse.de>

	PR middle-end/87087
	Revert
	2018-02-07  Richard Biener  <rguenther@suse.de>

        PR tree-optimization/84204
        * tree-chrec.c (chrec_fold_plus_1): Remove size limiting in
        this place.

2018-10-18  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87537
	* simplify-rtx.c (simplify_subreg): Simplify subreg of vec_merge
	of vec_duplicate.
	(test_vector_ops_duplicate): Add test for a scalar subreg of a
	VEC_MERGE of a VEC_DUPLICATE.

2018-10-17  Joseph Myers  <joseph@codesourcery.com>

	* doc/cpp.texi (__STDC_VERSION__): Document C2X handling.
	* doc/invoke.texi (-std=c2x, -std=gnu2x): Document new options.
	* doc/standards.texi (C Language): Document C2X.
	* dwarf2out.c (highest_c_language), config/rl78/rl78.c
	(rl78_option_override): Handle "GNU C2X" language name.

2018-10-17  Joseph Myers  <joseph@codesourcery.com>

	* doc/invoke.texi (-std=c17), doc/standards.texi (C Language):
	Document C17 as published in 2018.

2018-10-17  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/87623
	* fold-const.c (fold_truth_andor_1): If the right side is not constant,
	bail out if both sides do not have the same storage order.

2018-10-17  Aldy Hernandez  <aldyh@redhat.com>

	* bitmap.c (bitmap_head::dump): New.
	* bitmap.h (bitmap_head): Add dump().
	* gimple-ssa-evrp-analyze.c
	(evrp_range_analyzer::try_find_new_range): Adjust for value_range API.
	(evrp_range_analyzer::set_ssa_range_info): Same.
	(evrp_range_analyzer::record_ranges_from_phis): Same.
	(evrp_range_analyzer::record_ranges_from_stmt): Same.
	* gimple-ssa-evrp.c (evrp_dom_walker::before_dom_children): Same.
	* gimple-ssa-sprintf.c (get_int_range): Same.
	(format_integer): Same.
	(sprintf_dom_walker::handle_gimple_call): Same.
	* ipa-cp.c (ipcp_vr_lattice::meet_with_1): Same.
	(ipcp_vr_lattice::top_p): Same.
	(ipcp_vr_lattice::bottom_p): Same.
	(ipcp_vr_lattice::set_to_bottom): Same.
	(ipa_vr_operation_and_type_effects): Same.
	(propagate_vr_across_jump_function): Same.
	(ipcp_store_vr_results): Same.
	* ipa-prop.c (struct ipa_vr_ggc_hash_traits): Same.
	(ipa_print_node_jump_functions_for_edge): Same.
	(ipa_get_value_range): Same.
	(ipa_compute_jump_functions_for_edge): Same.
	(ipa_write_jump_function): Same.
	* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Same.
	* tree-ssa-threadedge.c (record_temporary_equivalences_from_phis):
	Same.
	* vr-values.c (set_value_range_to_nonnegative): Same.
	(set_value_range_to_truthvalue): Same.
	(vr_values::get_value_range): Same.
	(vr_values::set_defs_to_varying): Same.
	(vr_values::update_value_range): Same.
	(symbolic_range_based_on_p): Same.
	(vr_values::op_with_boolean_value_range_p): Same.
	(vr_values::extract_range_for_var_from_comparison_expr): Same.
	(vr_values::extract_range_from_ssa_name): Same.
	(vr_values::extract_range_from_binary_expr): Same.
	(vr_values::extract_range_from_unary_expr): Same.
	(vr_values::extract_range_from_cond_expr): Same.
	(vr_values::extract_range_from_comparison): Same.
	(vr_values::check_for_binary_op_overflow): Same.
	(vr_values::extract_range_basic): Same.
	(vr_values::extract_range_from_assignment): Same.
	(compare_ranges): Same.
	(compare_range_with_value): Same.
	(vr_values::adjust_range_with_scev): Same.
	(vrp_valueize): Same.
	(vrp_valueize_1): Same.
	(vr_values::get_vr_for_comparison): Same.
	(vr_values::compare_name_with_value): Same.
	(vr_values::compare_names): Same.
	(vr_values::vrp_evaluate_conditional): Same.
	(find_case_label_ranges): Same.
	(vr_values::vrp_visit_switch_stmt): Same.
	(vr_values::extract_range_from_phi_node): Same.
	(vr_values::simplify_div_or_mod_using_ranges): Same.
	(vr_values::simplify_bit_ops_using_ranges): Same.
	(test_for_singularity): Same.
	(range_fits_type_p): Same.
	(vr_values::simplify_cond_using_ranges_1): Same.
	(vr_values::simplify_switch_using_ranges): Same.
	(vr_values::simplify_float_conversion_using_ranges): Same.
	(vr_values::two_valued_val_range_p): Same.
	(vr_values::add_equivalence): Move to value_range::equiv_add.
	* vr-values.h (vr_values::add_equivalence): Remove.
	(VR_INITIALIZER): Remove.
	* tree-vrp.c (value_range::set): New.
	(value_range::equiv_add): New.
	(value_range::value_range): New.
	(value_range::deep_copy): New.
	(value_range::check): New.
	(value_range::equal_p): New.
	(value_range::ignore_equivs_equal_p): New.
	(value_range::operator==): New.
	(value_range::operator!=): New.
	(value_range::symbolic_p): New.
	(value_range::numeric_p): New.
	(value_range::set_undefined): New.
	(value_range::set_varying): New.
	(value_range::may_contain_p): New.
	(value_range::equiv_clear): New.
	(value_range::singleton_p): New.
	(value_range::intersect): New.
	(value_range::dump): New.
	(value_range::set_and_canonicalize): New.
	(set_value_range): Adjust for value_range API.
	(set_value_range_to_undefined): Same.
	(set_value_range_to_varying): Same.
	(set_and_canonicalize_value_range): Same.
	(set_value_range_to_nonnull): Same.
	(set_value_range_to_null): Same.
	(range_is_null): Same.
	(range_is_nonnull): Same.
	(range_int_cst_p): Same.
	(range_int_cst_singleton_p): Same.
	(symbolic_range_p): Same.
	(range_includes_zero_p): Same.
	(value_range_constant_singleton): Same.
	(vrp_set_zero_nonzero_bits): Same.
	(ranges_from_anti_range): Same.
	(extract_range_into_wide_ints): Same.
	(extract_range_from_multiplicative_op): Same.
	(set_value_range_with_overflow): Same.
	(extract_range_from_binary_expr_1): Same.
	(extract_range_from_unary_expr): Same.
	(dump_value_range): Same.
	(debug_value_range): Same.
	(vrp_prop::check_array_ref): Same.
	(vrp_prop::check_mem_ref): Same.
	(vrp_prop::vrp_initialize): Same.
	(vrp_prop::visit_stmt): Same.
	(intersect_ranges): Same.
	(vrp_prop::visit_phi): Same.
	(vrp_prop::vrp_finalize): Same.
	(determine_value_range_1): Same.
	(determine_value_range): Same.
	(vrp_intersect_ranges_1): Rename to...
	(vrp_intersect_1): this.
	(vrp_intersect_ranges): Rename to...
	(value_range::intersect_helper): ...this.
	(vrp_meet_1): Rename to...
	(value_range::union_helper): ...this.
	(vrp_meet): Rename to...
	(value_range::union_): ...this.
	(copy_value_range): Remove.
	* tree-vrp.h (struct value_range): Rewrite into a proper class.
	(value_range::vrtype): New.
	(value_range::type): New.
	(value_range::equiv): New.
	(value_range::min): New.
	(value_range::max): New.
	(value_range::varying_p): New.
	(value_range::undefined_p): New.
	(value_range::null_p): New.
	(value_range::equiv_add): New.
	(copy_value_range): Remove.

2018-10-17  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (SELFTEST_TARGETS): New.
	(selftest) Change from s-selftest-c to $(SELFTEST_TARGETS).
	(C_SELFTEST_FLAGS, C_SELFTEST_DEPS, s-selftest-c, selftest-c-gdb)
	(selftest-gdb, selftest-c-valgrind, selftest-valgrind): Move to
	c/Make-lang.in.
	(CPP_SELFTEST_FLAGS, CPP_SELFTEST_DEPS, s-selftest-c++)
	(selftest-c++-gdb, selftest-c++-valgrind): Move to
	cp/Make-lang.in.
	* configure: Regenerate.
	* configure.ac (selftest_languages): New.

2018-10-17  Aldy Hernandez  <aldyh@redhat.com>

        * tree-vrp.c (extract_range_from_multiplicative_op): Remove
	overflow wraps argument.
        (extract_range_from_binary_expr_1): Do not pass overflow wraps to
	wide_int_range_multiplicative_op.
        * wide-int-range.cc (wide_int_range_mult_wrapping): Remove
	overflow wraps argument.
        (wide_int_range_multiplicative_op): Same.
        (wide_int_range_lshift): Same.
        (wide_int_range_div): Same.
        * wide-int-range.h (wide_int_range_multiplicative_op): Same.
        (wide_int_range_lshift): Same.
        (wide_int_range_div): Same.

2018-10-17  Aldy Hernandez  <aldyh@redhat.com>

	* wide-int-range.h (wide_int_range_shift_undefined_p): Adjust to
	use sign as argument.
	* tree-vrp.c (extract_range_from_binary_expr_1): Pass sign to
	wide_int_range_shift_undefined_p.

2018-10-16  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.md (despeculate_copy<ALLI_TI:mode>):
	Rename to...
	(@despeculate_copy<ALLI_TI:mode>): ... This.
	* config/aarch64/aarch64.c (aarch64_speculation_safe_value): Remove
	switch statement.

2018-10-16  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config.gcc: Obsolete *-*-solaris2.10*.
	* doc/install.texi (Specific, *-*-solaris2*): Document it.

2018-10-12  Jeff Law  <law@redhat.com>

	* config/ft32/ft32.md (ft32_general_movsrc_operand): Disable
	reg + sym +- const_int addressing modes.

2018-10-15  David Malcolm  <dmalcolm@redhat.com>

	* common.opt (fdiagnostics-minimum-margin-width=): New option.
	* diagnostic-show-locus.c (layout::layout): Apply the minimum
	margin width.
	(layout::start_annotation_line): Only print up to 3 of the
	margin character, to avoid touching the left-hand side.
	(selftest::test_diagnostic_show_locus_fixit_lines): Update for
	minimum margin width, as set by test_diagnostic_context's ctor.
	(selftest::test_fixit_insert_containing_newline): Likewise.
	(selftest::test_fixit_insert_containing_newline_2): Likewise.
	(selftest::test_line_numbers_multiline_range): Clear
	dc.min_margin_width.
	* diagnostic.c (diagnostic_initialize): Initialize
	min_margin_width.
	* diagnostic.h (struct diagnostic_context): Add field
	"min_margin_width".
	* doc/invoke.texi: Add -fdiagnostics-minimum-margin-width=.
	* opts.c (common_handle_option): Handle
	OPT_fdiagnostics_minimum_margin_width_.
	* selftest-diagnostic.c
	(selftest::test_diagnostic_context::test_diagnostic_context):
	Initialize min_margin_width to 6.
	* toplev.c (general_init): Initialize global_dc->min_margin_width.

2018-10-15  David Malcolm  <dmalcolm@redhat.com>

	* gcc-rich-location.h (gcc_rich_location::add_location_if_nearby):
	Fix usage of "error_at_rich_loc" in the comment.

2018-10-15  Renlin Li  <renlin.li@arm.com>

	PR target/87563
	* tree-vectorizer.c (try_vectorize_loop_1): Don't use
	if-conversioned loop when it contains ifn with types not
	supported by backend.
	* internal-fn.c (expand_direct_optab_fn): Add an assert.
	(direct_internal_fn_supported_p): New helper function.
	* internal-fn.h (direct_internal_fn_supported_p): Declare.

2018-10-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/87572
	* common/config/i386/i386-common.c (OPTION_MASK_ISA_AVX512F_UNSET):
	Remove OPTION_MASK_ISA_AVX5124FMAPS_UNSET and
	OPTION_MASK_ISA_AVX5124VNNIW_UNSET.

2018-10-15  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/87022
	* tree-loop-distribution.c (pg_add_dependence_edges): Check all
	bits in dist vector rather than the first one.

2018-10-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/87610
	* tree-ssa-structalias.c (struct vls_data): Add escaped_p member.
	(visit_loadstore): When a used restrict tag escaped verify that
	the points-to solution of "other" pointers do not include
	escaped.
	(compute_dependence_clique): If a used restrict tag escaped
	communicated that down to visit_loadstore.

2018-10-15  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_expand_vec_init): Force vector element
	into reg if it isn't a general operand.

2018-10-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87599
	* config/i386/sse.md (*vec_dupv2di): Add register source to
	movddup.

2018-10-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87572
	* common/config/i386/i386-common.c (OPTION_MASK_ISA_AVX512F_UNSET):
	Add OPTION_MASK_ISA_AVX512IFMA_UNSET,
	OPTION_MASK_ISA_AVX5124FMAPS_UNSET and
	OPTION_MASK_ISA_AVX5124VNNIW_UNSET.

2018-10-13  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2cfi.c (struct dw_trace_info): Add args_size_defined_for_eh.
	(notice_args_size): Set it in the current trace if no insn that can
	throw internally has been seen yet.
	(connect_traces): When connecting args_size between traces, allow the
	incoming values not to match if there is an insn setting it before the
	first insn that can throw internally; in that case, force the creation
	of a CFI note on this latter insn.

2018-10-13  Jonathan Wakely  <jwakely@redhat.com>

	* opt-problem.h (opt_wrapper): Use template-argument-list when naming
	the base class, because using the injected-class-name was not clearly
	specified until DR 176.

2018-10-12  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/pdp11.md (doloop_end): New expander.
	(doloop_end_insn): renamed from "doloop_end".
	(addqi3): New pattern.
	(subqi3): New pattern.
	* config/pdp11/predicates.md (incdec_operand): New predicate.

2018-10-12  Yury Gribov  <tetra2005@gmail.com>

	PR middle-end/81376
	* real.c (format_helper::can_represent_integral_type_p): New function
	* real.h (format_helper::can_represent_integral_type_p): Ditto.
	* match.pd: New pattern.

2018-10-12  Alexandre Oliva <oliva@adacore.com>

	* configure.ac: Introduce --enable-large-address-aware
	to define MINGW_DEFAULT_LARGE_ADDR_AWARE.
	* doc/install.texi: Document it.
	* configure, config.in: Rebuilt.
	* config/i386/mingw32.h (LINK_SPEC_LARGE_ADDR_AWARE): Define,
	based on MINGW_DEFAULT_LARGE_ADDR_AWARE.
	(LINK_SPEC): Insert it.
	* config/i386/mingw-w64.h: Likewise.

	* cygming.h (HAVE_GAS_ALIGNED_COMM): Fallback-define.

2018-10-12  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/87600
	* ira-lives (non_conflicting_reg_copy_p): Disable for non LRA targets.

2018-10-12  Paul Koning  <ni1d@arrl.net>

	* doc/md.texi (doloop_end): Document that the pattern code may
	need to check operand mode.

2018-10-12  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.md (zero_extendsidi2_aarch64): Add alternatives
	to zero-extend between int and floating-point registers.
	(load_pair_zero_extendsidi2_aarch64): Add alternative for zero-extended
	ldp into floating-point registers.  Add type and arch attributes.
	(zero_extend<SHORT:mode><GPI:mode>2_aarch64): Add arch attribute.
	Use f_loads for type attribute.

2018-10-11  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (attribute packed): Correct typos.

2018-10-11  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (attribute flatten): Mention interaction with
	noinline.

2018-10-11  Jan Hubicka  <hubicka@ucw.cz>

	PR target/87156
	* cgraphclones.c (cgraph_node::create_version_clone_with_body):
	Set new_decl virtual flag to zero.

2018-10-11  Martin Sebor  <msebor@redhat.com>

	PR middle-end/87593
	* doc/extend.texi (attribute format_arg): Discuss using multiple
	attributes on a single function.

2018-10-11  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	PR tree-optimization/86829
	* match.pd (sin (atan (x))): New simplification rules.
	(cos (atan (x))): Likewise.
	* real.c (build_sinatan_real): New function.
	* real.h (build_sinatan_real): Prototype.

2018-10-11  Will Schmidt <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000.c (map_to_integral_tree_type): New helper
	function.
	(fold_mergeeo_helper): New helper function.
	(rs6000_gimple_fold_builtin): Add hooks for vec_mergee and vec_mergeo
	intrinsics.  Correct some whitespace indentation issues.

2018-10-11  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/87511
	* config/aarch64/aarch64.c (aarch64_mask_and_shift_for_ubfiz_p):
	Use HOST_WIDE_INT_1U for shift.

2018-10-11  Doug Rupp  <rupp@adacore.com>
            Olivier Hainque  <hainque@adacore.com>

	* config/rs6000/vxworks.h (VXWORKS_RELAX_LINK_SPEC): New macro.
	Pass --relax to the linker for RTPs.
	(LINK_SPEC): Append VXWORKS_RELAX_LINK_SPEC.

2018-10-11  Andrew Stubbs  <ams@codesourcery.com>
	    Jan Hubicka  <jh@suse.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* print-rtl.c (print_rtx_operand_codes_E_and_V): Print how many times
	the same elements are repeated rather than printing all of them.
	* read-rtl.c (rtx_reader::read_rtx_operand): Recognize and expand
	"repeated" elements.
	* read-rtl-function.c (test_loading_repeat): New function.
	(read_rtl_function_c_tests): Call test_loading_repeat.
	* rtl-tests.c (test_dumping_repeat): New function.
	(rtl_tests_c_tests): Call test_dumping_repeat.

2018-10-11  Richard Biener  <rguenther@suse.de>

	* config/i386/x86-tune-costs.h (bdver?_memcpy, bdver?_memset,
	bdver?_cost): Unify to ...
	(bdver_memcpy, bdver_memset, bdver_cost): ... this.
	* config/i386/i386.c (processor_cost_table): Adjust.

2018-10-10  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/87574
	* cgraphunit.c (cgraph_node::expand_thunk): Force DECL_IGNORED_P on
	the thunk when expanding to GIMPLE.

2018-10-10  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* varasm.c (mergeable_string_section): Don't try to move zero-length
	strings to the merge section.

2018-10-10  Uros Bizjak  <ubizjak@gmail.com>

	PR target/87573
	* config/i386/mmx.md (const_vector 0 -> mem splitter): New splitter.

2018-10-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/87550
	* config/i386/i386-builtin.def (IX86_BUILTIN_RDPMC): Move from args set
	to special_args set.

2018-10-10  Richard Biener  <rguenther@suse.de>

	* config/i386/sse.md (reduc_plus_scal_v8df, reduc_plus_scal_v4df,
	reduc_plus_scal_v2df, reduc_plus_scal_v16sf, reduc_plus_scal_v8sf,
	reduc_plus_scal_v4sf): Merge into pattern reducing to half width
	and recursing and pattern terminating the recursion on SSE
	vector width using ix86_expand_reduc.
	(reduc_sminmax_scal_<mode>): Split into part reducing to half
	width and recursing and SSE2 vector variant doing the final
	reduction with ix86_expand_reduc.
	(reduc_uminmax_scal_<mode>): Likewise for the AVX512 variants
	with terminating the recursion at AVX level, splitting that
	to SSE there.

2018-10-09  David Malcolm  <dmalcolm@redhat.com>

	* genmatch.c (error_cb): Rename to...
	(diagnostic_cb): ...this, converting int params to enums.
	(fatal_at): Update for renaming.
	(warning_at): Likewise.
	(main): Likewise.
	* input.c (selftest::ebcdic_execution_charset::apply):
	Update for renaming of...
	(selftest::ebcdic_execution_charset::on_error): ...this, renaming
	to...
	(selftest::ebcdic_execution_charset::on_diagnostic): ...this,
	converting level and reason to enums.
	(class selftest::lexer_error_sink): Rename to...
	(class selftest::lexer_test_options): ...this, renaming field
	"m_errors" to "m_diagnostics".
	(selftest::lexer_test_options::apply): Update for renaming of...
	(selftest::lexer_test_options::on_error): ...this, renaming to...
	(selftest::lexer_test_options::on_diagnostic): ...this
	converting level and reason to enums.
	(selftest::test_lexer_string_locations_raw_string_unterminated):
	Update for renamings.
	* opth-gen.awk (struct cpp_reason_option_codes_t): Use enum for
	"reason".

2018-10-09  Paul A. Clarke  <pc@us.ibm.com>

	* config.gcc (powerpc*-*-*): Add pmmintrin.h to extra_headers.
	* config/rs6000/pmmintrin.h: New file.

2018-10-09  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/86659
	* gimple-match.h (gimple_match_op constructors): Initialize reverse.

2018-10-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/63155
	* tree-ssa-structalias.c: Include tree-ssa.h.
	(get_constraint_for_ssa_var): For undefs return nothing_id.
	(find_func_aliases): Cleanup PHI handling.

2018-10-09  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.c (dump_stmt_cost): Fix cut&paste missing
	replacements.

2018-10-09  Martin Liska  <mliska@suse.cz>

	* asan.c (asan_emit_stack_protection): If a stack variable
	is located in a same file as current function, then emit
	line info into variable definition string.

2018-10-08  Eric Botcazou  <ebotcazou@adacore.com>

	* print-rtl.c (rtx_writer::print_rtx_operand_code_i): Print column
	information.

2018-10-08  Eric Botcazou  <ebotcazou@adacore.com>

	* cgraphunit.c (cgraph_node::expand_thunk): Do not force DECL_IGNORED_P
	on the thunk.

2018-10-08  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/86659
	* gimple-match.h (struct gimple_match_op): Add reverse field.
	(gimple_match_op::set_op): New overloaded method.
	* gimple-match-head.c (maybe_build_generic_op) <BIT_FIELD_REF>: Set
	the REF_REVERSE_STORAGE_ORDER flag on the value.
	(gimple_simplify) <GIMPLE_ASSIGN>: For BIT_FIELD_REF, propagate the
	REF_REVERSE_STORAGE_ORDER flag and avoid simplifying if it is set.
        
2018-10-08  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/63155
	* gimple-ssa-backprop.c (backprop::intersect_uses): Use
	FOR_EACH_IMM_USE_FAST instead of FOR_EACH_IMM_USE_STMT.

2018-10-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87517
	* config/i386/avx512fintrin.h (_mm512_mask_fmaddsub_round_pd):
	Defined with __builtin_ia32_vfmaddsubpd512_mask.

2018-10-08  Richard Biener  <rguenther@suse.de>

	* config/i386/x86-tune-costs.h (znver1_cost): Make AVX256 vector loads
	cost the same as AVX128 ones.

2018-10-08  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/pdp11-protos.h (output_block_move): Remove.
	(expand_block_move): New function.
	* config/pdp11/pdp11.c (output_block_move): Remove.
	(expand_block_move): New function.
	* config/pdp11/pdp11.h (MOVE_RATIO): New definition.
	* config/pdp11/pdp11.md (movmemhi): Use expand_block_move.
	(*movmemhi1): Remove.

2018-10-08  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/2827.md: Increase latencies for some FP instructions.

2018-10-08  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost):
	Open a dump scope.
	* tree-vectorizer.c (dump_stmt_cost): Add cost param and dump it.
	* tree-vectorizer.h (dump_stmt_cost): Adjust.
	(add_stmt_cost): Dump return value of the hook.

2018-10-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/63155
	* tree-ssa-propagate.c (add_ssa_edge): Do cheap check first.
	(ssa_propagation_engine::ssa_propagate): Remove redundant
	bitmap bit clearing.

2018-10-05  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/86939
	PR rtl-optimization/87479
	* ira.h (non_conflicting_reg_copy_p): New prototype.
	* ira-lives.c (ignore_reg_for_conflicts): New static variable.
	(make_hard_regno_dead): Don't add conflicts for register
	ignore_reg_for_conflicts.
	(make_object_dead): Likewise.
	(non_conflicting_reg_copy_p): New function.
	(process_bb_node_lives): Set ignore_reg_for_conflicts for copies.
	Remove special conflict handling of REAL_PIC_OFFSET_TABLE_REGNUM.
	* lra-lives.c (ignore_reg_for_conflicts): New static variable.
	(make_hard_regno_dead): Don't add conflicts for register
	ignore_reg_for_conflicts.  Remove special conflict handling of
	REAL_PIC_OFFSET_TABLE_REGNUM.  Remove now unused argument
	check_pic_pseudo_p and update callers.
	(mark_pseudo_dead): Don't add conflicts for register
	ignore_reg_for_conflicts.
	(process_bb_lives): Set ignore_reg_for_conflicts for copies.

2018-10-05  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.md (f<quiet_pattern>_quiet<ANYF:mode><X:mode>4):
	Add define_expand.  Add ! HONOR_SNANS check to current pattern.  Add
	new pattern using HONOR_SNANS that emits one extra instruction.

2018-10-05  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (unnamed mfcr scc_comparison_operator
	patterns): Merge SI and DI patterns to a GPR pattern.
	(unnamed define_insn and define_split for record form of that): Merge
	to a single define_insn_and_split pattern.

2018-10-05  David Malcolm  <dmalcolm@redhat.com>

	PR c++/56856
	* input.c (expand_location_to_spelling_point): Add param "aspect"
	and use rather than hardcoding LOCATION_ASPECT_CARET.
	(get_substring_ranges_for_loc): Handle the case of a single token
	within a macro expansion.
	* input.h (expand_location_to_spelling_point): Add "aspect" param,
	defaulting to LOCATION_ASPECT_CARET.

2018-10-05  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/pdp11.c (TARGET_CXX_GUARD_TYPE): Define.
	(TARGET_CXX_CLASS_DATA_ALWAYS_COMDAT): Define.
	(TARGET_CXX_LIBRARY_RTTI_COMDAT): Define.
	(pdp11_guard_type): New function.

2018-10-05  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/pdp11.h (FLOAT_TYPE_SIZE): Always 32.
	* config/pdp11/pdp11.opt (mfloat32): Remove.
	(mfloat64): Remove.
	* doc/invoke.texi (pdp11 -mfloat32): Remove:
	(pdp11 -mfloat64): Remove.

2018-10-05  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*cmpxf_cc_i387): Remove pattern.
	(*cmp<mode>_cc_i387): Ditto.
	(*cmpu<mode>_cc_i387): Ditto.
	(*cmp<X87MODEF:mode>_<SWI24:mode>_cc_i387): Ditto.
	* config/i386/i386.c (ix86_expand_fp_compare): Remove
	"scratch" argument.
	<case IX86_FPCMP_SAHF>: Do not generate pattern with HImode clobber.
	Emit x86_sahf_1 pattern.
	(ix86_expand_compare): Update call to ix86_expand_fp_compare.
	(ix86_expand_carry_flag_compare): Ditto.

2018-10-05  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*cmpxf_i387): Change operand 2 predicate
	to reg_or_0_operand.  Add "C" constraint.
	(*cmpxf_cc_i387): Ditto.
	(*cmp<mode>_i387): Change operand 2 predicate
	to nonimm_or_0_operand.  Add "C" constraint.
	(*cmp<mode>_cc_i387): Ditto.
	(*cmp<mode>_0_i387): Remove insn pattern.
	(*cmp<mode>_0_cc_i387): Ditto.

2018-10-05  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/constraints.md ("C"): Do not depend on TARGET_SSE.
	* config/i386/predicates.md (nonimm_or_0_operand): Rename
	from vector_move_operand.  Update all uses.

2018-10-05  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/87490
	* builtins.c (expand_builtin_strnlen): Handle a null data.decl
	consistently.

2018-10-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/63155
	* tree-ssa-ccp.c (ccp_propagate::visit_phi): Avoid excess
	vertical space in dumpfiles.
	* tree-ssa-propagate.h
	(ssa_propagation_engine::process_ssa_edge_worklist): Remove.
	* tree-ssa-propagate.c (cfg_blocks_back): New global.
	(ssa_edge_worklist_back): Likewise.
	(curr_order): Likewise.
	(cfg_blocks_get): Remove abstraction.
	(cfg_blocks_add): Likewise.
	(cfg_blocks_empty_p): Likewise.
	(add_ssa_edge): Add to current or next worklist based on
	RPO index.
	(add_control_edge): Likewise.
	(ssa_propagation_engine::process_ssa_edge_worklist): Fold
	into ...
	(ssa_propagation_engine::ssa_propagate): ... here.  Unify
	iteration from CFG and SSA edge worklist so we process
	everything in RPO order, prioritizing forward progress
	over iteration.
	(ssa_prop_init): Allocate new worklists, do not dump
	immediate uses.
	(ssa_prop_fini): Free new worklists.

2018-10-05  Richard Biener  <rguenther@suse.de>

	* tree-core.h (tree_block::abstract_flag): Remove.
	(tree_block::block_num): Make full 32bits.
	* tree.def (BLOCK): Remove docs about BLOCK_ABSTRACT.
	* tree.h (BLOCK_ABSTRACT): Remove.
	* dwarf2out.c (gen_lexical_block_die): Remove dead code
	resulting from BLOCK_ABSTRACT being always false.
	(gen_inlined_subroutine_die): Likewise.
	(gen_block_die): Likewise.
	* tree.c (block_ultimate_origin): Likewise.
	* tree-pretty-print.c (dump_block_node): Remove code dealing
	with BLOCK_ABSTRACT.
	* tree-ssa-live.c (dump_scope_block): Likewise.
	* tree-streamer-in.c (unpack_ts_block_value_fields): Likewise.
	* tree-streamer-out.c (pack_ts_block_value_fields): Likewise.

2018-10-05   Richard Biener  <rguenther@suse.de>

	* config/i386/i386.c (ix86_add_stmt_cost): When scalar cost
	is asked for initialize mode to the component mode of the
	vector type.

2018-10-05  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87522
	* config/i386/gnu-user.h (ASM_SPEC): Don't pass -msse2avx to
	assembler for -mavx.
	* config/i386/gnu-user64.h (ASM_SPEC): Likewise.

2018-10-05  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/87509
	* config/rs6000/rs6000-builtin.def (RS6000_BUILTIN_SET_FPSCR_DRN): Use
	RS6000_BTM_DFP.
	* config/rs6000/rs6000.md (rs6000_set_fpscr_rn): Require the operand
	to be DImode.  When using mffscrn, force the operand to a register.

2018-10-04  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*fop_<X87MODEF:mode>_2_i387): Macroize insn
	from *fop_<MODEF:mode>_2_i387 and *fop_xf_2_i387 using
	X87MODEF mode iterator.
	(*fop_<X87MODEF:mode>_3_i387): Macroize insn from
	*fop_<MODEF:mode>_3_i387 and *fop_xf_3_i387 using
	X87MODEF mode iterator.

2018-10-04  Vinay Kumar  <vinay.kumar@blackfigtech.com>

	* doc/invoke.texi (-Wno-prio-ctor-dtor): Document new warning
	-Wno-prio-ctor-dtor.

2018-10-04  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (OBJS): Add opt-problem.o.
	* dump-context.h: Include "selftest.h.
	(selftest::temp_dump_context): New forward decl.
	(class dump_context): Make friend of class
	selftest::temp_dump_context.
	(dump_context::dump_loc_immediate): New decl.
	(class dump_pretty_printer): Move here from dumpfile.c.
	(class temp_dump_context): Move to namespace selftest.
	(temp_dump_context::temp_dump_context): Add param
	"forcibly_enable_dumping".
	(selftest::verify_dumped_text):
	(ASSERT_DUMPED_TEXT_EQ): Move here from dumpfile.c.
	(selftest::verify_item):
	(ASSERT_IS_TEXT): Move here from dumpfile.c.
	(ASSERT_IS_TREE): Likewise.
	(ASSERT_IS_GIMPLE): Likewise.
	* dumpfile.c (dump_context::dump_loc): Move immediate dumping
	to...
	(dump_context::dump_loc_immediate): ...this new function.
	(class dump_pretty_printer): Move to dump-context.h.
	(dump_switch_p_1): Don't enable MSG_PRIORITY_REEMITTED.
	(opt_info_switch_p_1): Enable MSG_PRIORITY_REEMITTED.
	(temp_dump_context::temp_dump_context): Move to "selftest"
	namespace.  Add param "forcibly_enable_dumping", and use it to
	conditionalize the use of m_pp;
	(selftest::verify_dumped_text): Make non-static.
	(ASSERT_DUMPED_TEXT_EQ): Move to dump-context.h.
	(selftest::verify_item): Make non-static.
	(ASSERT_IS_TEXT): Move to dump-context.h.
	(ASSERT_IS_TREE): Likewise.
	(ASSERT_IS_GIMPLE): Likewise.
	(selftest::test_capture_of_dump_calls): Pass "true" for new
	param of temp_dump_context.
	* dumpfile.h (enum dump_flag): Add MSG_PRIORITY_REEMITTED, adding
	it to MSG_ALL_PRIORITIES.  Update values of TDF_COMPARE_DEBUG and
	TDF_COMPARE_DEBUG.
	* opt-problem.cc: New file.
	* opt-problem.h: New file.
	* optinfo-emit-json.cc
	(selftest::test_building_json_from_dump_calls): Pass "true" for
	new param of temp_dump_context.
	* optinfo.cc (optinfo_kind_to_dump_flag): New function.
	(optinfo::emit_for_opt_problem): New function.
	(optinfo::emit): Clarity which emit_item is used.
	* optinfo.h (optinfo::get_dump_location): New accessor.
	(optinfo::emit_for_opt_problem): New decl.
	(optinfo::emit): Make const.
	* selftest-run-tests.c (selftest::run_tests): Call
	selftest::opt_problem_cc_tests.
	* selftest.h (selftest::opt_problem_cc_tests): New decl.
	* tree-data-ref.c (dr_analyze_innermost): Convert return type from
	bool to opt_result, converting fprintf messages to
	opt_result::failure_at calls.  Add "stmt" param for use by the
	failure_at calls.
	(create_data_ref): Pass "stmt" to the dr_analyze_innermost call.
	(runtime_alias_check_p): Convert return type from bool to
	opt_result, converting dump_printf calls to
	opt_result::failure_at, using the statement DDR_A for their
	location.
	(find_data_references_in_stmt): Convert return type from bool to
	opt_result, converting "return false" to opt_result::failure_at
	with a new message.
	* tree-data-ref.h: Include "opt-problem.h".
	(dr_analyze_innermost): Convert return type from bool to opt_result,
	and add a const gimple * param.
	(find_data_references_in_stmt): Convert return type from bool to
	opt_result.
	(runtime_alias_check_p): Likewise.
	* tree-predcom.c (find_looparound_phi): Pass "init_stmt" to
	dr_analyze_innermost.
	* tree-vect-data-refs.c (vect_mark_for_runtime_alias_test):
	Convert return type from bool to opt_result, adding a message for
	the PARAM_VECT_MAX_VERSION_FOR_ALIAS_CHECKS zero case.
	(vect_analyze_data_ref_dependence): Convert return type from bool
	to opt_result.  Change sense of return type from "false"
	effectively meaning "no problems" to "false" meaning a problem,
	so that "return false" becomes "return opt_result::success".
	Convert "return true" calls to opt_result::failure_at, using
	the location of statement A rather than vect_location.
	(vect_analyze_data_ref_dependences): Convert return type from bool
	to opt_result.
	(verify_data_ref_alignment): Likewise, converting dump_printf_loc
	calls to opt_result::failure_at, using the stmt location rather
	than vect_location.
	(vect_verify_datarefs_alignment): Convert return type from bool
	to opt_result.
	(vect_enhance_data_refs_alignment): Likewise.  Split local "stat"
	into multiple more-tightly-scoped copies.
	(vect_analyze_data_refs_alignment): Convert return type from bool
	to opt_result.
	(vect_analyze_data_ref_accesses): Likewise, converting a
	"return false" to a "return opt_result::failure_at", adding a
	new message.
	(vect_prune_runtime_alias_test_list): Convert return type from
	bool to opt_result, converting dump_printf_loc to
	opt_result::failure_at.  Add a %G to show the pertinent statement,
	and use the stmt's location rather than vect_location.
	(vect_find_stmt_data_reference): Convert return type from
	bool to opt_result, converting dump_printf_loc to
	opt_result::failure_at, using stmt's location.
	(vect_analyze_data_refs):  Convert return type from bool to
	opt_result.  Convert "return false" to "return
	opt_result::failure_at", adding messages as needed.
	* tree-vect-loop.c (vect_determine_vf_for_stmt_1): Convert return
	type from bool to opt_result.
	(vect_determine_vf_for_stmt): Likewise.
	(vect_determine_vectorization_factor): Likewise, converting
	dump_printf_loc to opt_result::failure_at, using location of phi
	rather than vect_location.
	(vect_analyze_loop_form_1): Convert return type from bool to
	opt_result, converting dump_printf_loc calls, retaining the use of
	vect_location.
	(vect_analyze_loop_form): Convert return type from loop_vec_info
	to opt_loop_vec_info.
	(vect_analyze_loop_operations): Convert return type from bool to
	opt_result, converting dump_printf_loc calls, using the location
	of phi/stmt rather than vect_location where available.  Convert
	various "return false" to "return opt_result::failure_at" with
	"unsupported phi" messages.
	(vect_get_datarefs_in_loop): Convert return type from bool to
	opt_result.  Add a message for the
	PARAM_LOOP_MAX_DATAREFS_FOR_DATADEPS failure.
	(vect_analyze_loop_2): Convert return type from bool to
	opt_result.  Ensure "ok" is set to a opt_result::failure_at before
	each "goto again;", adding new messages where needed.
	Add "unsupported grouped {store|load}" messages.
	(vect_analyze_loop): Convert return type from loop_vec_info to
	opt_loop_vec_info.
	* tree-vect-slp.c (vect_analyze_slp): Convert return type from
	bool to opt_result.
	* tree-vect-stmts.c (process_use): Likewise, converting
	dump_printf_loc call and using stmt location, rather than
	vect_location.
	(vect_mark_stmts_to_be_vectorized): Likeise.
	(vect_analyze_stmt): Likewise, adding a %G.
	(vect_get_vector_types_for_stmt): Convert return type from bool to
	opt_result, converting dump_printf_loc calls and using stmt
	location, rather than vect_location.
	(vect_get_mask_type_for_stmt): Convert return type from tree to
	opt_tree, converting dump_printf_loc calls and using stmt location.
	* tree-vectorizer.c: Include "opt-problem.h.
	(try_vectorize_loop_1): Flag "Analyzing loop at" dump message as
	MSG_PRIORITY_INTERNALS.  Convert local "loop_vinfo" from
	loop_vec_info to opt_loop_vec_info.  If if fails, and dumping is
	enabled, use it to report at the top level "couldn't vectorize
	loop" followed by the problem.
	* tree-vectorizer.h (opt_loop_vec_info): New typedef.
	(vect_mark_stmts_to_be_vectorized): Convert return type from bool
	to opt_result.
	(vect_analyze_stmt): Likewise.
	(vect_get_vector_types_for_stmt): Likewise.
	(tree vect_get_mask_type_for_stmt): Likewise.
	(vect_analyze_data_ref_dependences): Likewise.
	(vect_enhance_data_refs_alignment): Likewise.
	(vect_analyze_data_refs_alignment): Likewise.
	(vect_verify_datarefs_alignment): Likewise.
	(vect_analyze_data_ref_accesses): Likewise.
	(vect_prune_runtime_alias_test_list): Likewise.
	(vect_find_stmt_data_reference): Likewise.
	(vect_analyze_data_refs): Likewise.
	(vect_analyze_loop): Convert return type from loop_vec_info to
	opt_loop_vec_info.
	(vect_analyze_loop_form): Likewise.
	(vect_analyze_slp): Convert return type from bool to opt_result.

2018-10-04  David Malcolm  <dmalcolm@redhat.com>

	* doc/invoke.texi (-fopt-info): Document new "internals"
	sub-option.
	* dump-context.h (dump_context::apply_dump_filter_p): New decl.
	* dumpfile.c (dump_options): Update for renaming of MSG_ALL to
	MSG_ALL_KINDS.
	(optinfo_verbosity_options): Add "internals".
	(kind_as_string): Update for renaming of MSG_ALL to MSG_ALL_KINDS.
	(dump_context::apply_dump_filter_p): New member function.
	(dump_context::dump_loc): Use apply_dump_filter_p rather than
	explicitly masking the dump_kind.
	(dump_context::begin_scope): Increment the scope depth first.  Use
	apply_dump_filter_p rather than explicitly masking the dump_kind.
	(dump_context::emit_item): Use apply_dump_filter_p rather than
	explicitly masking the dump_kind.
	(dump_dec): Likewise.
	(dump_hex): Likewise.
	(dump_switch_p_1): Default to MSG_ALL_PRIORITIES.
	(opt_info_switch_p_1): Default to MSG_PRIORITY_USER_FACING.
	(opt_info_switch_p): Update handling of default
	MSG_OPTIMIZED_LOCATIONS to cope with default of
	MSG_PRIORITY_USER_FACING.
	(dump_basic_block): Use apply_dump_filter_p rather than explicitly
	masking the dump_kind.
	(selftest::test_capture_of_dump_calls): Update test_dump_context
	instances to use MSG_ALL_KINDS | MSG_PRIORITY_USER_FACING rather
	than MSG_ALL.  Generalize scope test to be run at all four
	combinations of with/without MSG_PRIORITY_USER_FACING and
	MSG_PRIORITY_INTERNALS, adding examples of explicit priority
	for each of the two values.
	* dumpfile.h (enum dump_flag): Add comment about the MSG_* flags.
	Rename MSG_ALL to MSG_ALL_KINDS.  Add MSG_PRIORITY_USER_FACING,
	MSG_PRIORITY_INTERNALS, and MSG_ALL_PRIORITIES, updating the
	values for TDF_COMPARE_DEBUG and TDF_ALL_VALUES.
	(AUTO_DUMP_SCOPE): Add a note to the comment about the interaction
	with MSG_PRIORITY_*.
	* tree-vect-loop-manip.c (vect_loop_versioning): Mark versioning
	dump messages as MSG_PRIORITY_USER_FACING.
	* tree-vectorizer.h (DUMP_VECT_SCOPE): Add a note to the comment
	about the interaction with MSG_PRIORITY_*.

2018-10-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* varasm.c (output_constant): Add new parameter merge_strings.
	Make strings properly zero terminated in merge string sections.
	(mergeable_string_section): Don't fail if the last char is non-zero.
	(assemble_variable_contents): Handle merge string sections.
	(assemble_variable): Likewise.
	(assemble_constant_contents): Likewise.
	(output_constant_def_contents): Likewise.
	(output_constructor_array_range,
	output_constructor_regular_field): Adjust call to output_constant.
	(output_object_block): Adjust call to assemble_constant_contents
	and assemble_variable_contents.

2018-10-04  Martin Liska  <mliska@suse.cz>

	PR c/87483
	* cgraphunit.c (process_function_and_variable_attributes):
	Warn about a function with alias attribute and a body.

2018-10-04  Martin Liska  <mliska@suse.cz>

	PR ipa/82625
	* multiple_target.c (redirect_to_specific_clone): New function.
	(ipa_target_clone): Use it.
	* tree-inline.c: Fix comment.

2018-10-04  David Malcolm  <dmalcolm@redhat.com>

	* dumpfile.c (gcc::dump_manager::dump_manager): Initialize new
	fields.
	(gcc::dump_manager::~dump_manager): Free m_optinfo_filename.
	(gcc::dump_manager::register_pass): New member function, adapted
	from loop body in gcc::pass_manager::register_pass, adding a
	call to update_dfi_for_opt_info.
	(gcc::dump_manager::opt_info_enable_passes): Store the
	-fopt-info options into the new fields.  Move the loop
	bodies into...
	(gcc::dump_manager::update_dfi_for_opt_info): ...this new member
	function.
	* dumpfile.h (struct opt_pass): New forward decl.
	(gcc::dump_manager::register_pass): New decl.
	(gcc::dump_manager::update_dfi_for_opt_info): New decl.
	(class gcc::dump_manager): Add fields "m_optgroup_flags",
	"m_optinfo_flags", and "m_optinfo_filename".
	* passes.c (gcc::pass_manager::register_pass): Move all of the
	dump-handling code to gcc::dump_manager::register_pass.

2018-10-04  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/87466
	* target.def (setjmp_preserves_nonvolatile_regs_p): New target hook.
	* doc/tm.texi.in (TARGET_SETJMP_PRESERVES_NONVOLATILE_REGS_P): New hook.
	* doc/tm.texi: Regenerate.
	* ira-lives.c (process_bb_node_lives): Use the new target hook.
	* lra-lives.c (process_bb_lives): Likewise.
	* config/rs6000/rs6000.c (TARGET_SETJMP_PRESERVES_NONVOLATILE_REGS_P):
	Define.

2018-10-04  Tamar Christina  <tamar.christina@arm.com>

	* params.c (add_params): Fix initialization.

2018-10-04  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84107
	* tree-profile.c (init_ic_make_global_vars):
	Remove ic_void_ptr_var and ic_gcov_type_ptr_var.
	Come up with new ic_tuple* variables.  Emit
	__gcov_indirect_call{,_topn} variables.
	(gimple_gen_ic_profiler): Access the variable
	and emit gimple.
	(gimple_gen_ic_func_profiler): Access
	__gcov_indirect_call.callee field.
	(gimple_init_gcov_profiler): Use ptr_type_node.
	* value-prof.c (gimple_ic): Use ptr_type_node.

2018-10-04  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/85787
	* ipa-pure-const.c (malloc_candidate_p_1): Move most of malloc_candidate_p
	into this function and add support for detecting multiple phis.
	(DUMP_AND_RETURN): Move from malloc_candidate_p into top-level macro.

2018-10-04  Martin Liska  <mliska@suse.cz>

	PR ipa/87491
	* ipa-inline.c (inline_to_all_callers_1):
	Call ultimate_alias_target for node being inlined.

2018-10-03  Jeff Law  <law@redhat.com>

        * gimple-ssa-sprintf.c (format_string): Do not hardcode size of
        target's wchar_t.
        * tree.c (get_typenode_from_name): Moved from fortran/trans-types.c.
        * tree.h (get_typenode_from_name): Prototype.

2018-10-03  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*cmp<X87MODEF:mode>_<SWI24:mode>_i387):
	Change operand 2 predicate to nonimmediate_operand.
	(*cmp<X87MODEF:mode>_<SWI24:mode>_cc_i387): Ditto.

2018-10-03  Martin Sebor  <msebor@redhat.com>
	    Jeff Law  <law@redhat.com>

	* gimple-ssa-sprintf.c (struct fmtresult): Add new member and
	initialize it.
	(get_string_length): Detect unterminated arrays.
	(format_string): Same.
	(format_directive): Warn about unterminated arrays.
	(handle_gimple_call): Mark statements with no_warning as needed.

2018-10-03  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-c.c (riscv_cpu_cpp_builtins): For ABI_ILP32E,
	also define __riscv_abi_rve.  Delete trailing white space.

2018-10-03  Paul Koning  <ni1d@arrl.net>

	Enable LRA register allocator for PDP11.
	* config/pdp11/constraints.md (Q): Use define_memory_constraint.
	(R): Likewise.
	(D): Likewise.
	* config/pdp11/pdp11.c (pdp11_lra_p): New function.
	* config/pdp11/pdp11.opt (-mlra): New option.
	* doc/invoke.texi (PDP-11 Options): Document -mlra.

2018-10-03  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*<absneg:code>extendsfdf2): Remove.
	(*<absneg:code>extend<mode>xf2): Ditto.

2018-10-03  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/87415
	* tree-vrp.c (set_value_range_with_overflow): Special case one bit
	precision fields.

2018-10-02  Jeff Law  <law@redhat.com>

	* gimple-fold.c (get_range_strlen): Only set *nonstr when
	an unterminated string is discovered.  Bubble up range
	even for unterminated strings.
	(gimple_fold_builtin_strlen): Do not fold if get_range_strlen
	indicates the string was not terminated via NONSTR.

2018-10-03  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (extract_range_from_unary_expr): Special case all
	pointer conversions.
	Do not do anything special for anti-ranges.

2018-10-03  Jérôme Lambourg  <lambourg@adacore.com>

	* config/arm/vxworks.h (ARM_TARGET2_DWARF_FORMAT): Adjust to
	DW_EH_PE_pcrel | DW_EH_PE_indirect for RTPs.

2018-10-03  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/86109
	* coverage.c (coverage_begin_function): Do not
	mark lambdas as artificial.
	* tree-core.h (struct GTY): Remove tm_clone_flag
	and introduce new lambda_function.
	* tree.h (DECL_LAMBDA_FUNCTION): New macro.

2018-10-02  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/87474
	* config/rs6000/rs6000-string.c (expand_strn_compare): Check that both
	P8_VECTOR and VSX are enabled.

2018-10-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/driver-native.c (s390_host_detect_local_cpu): Add
	0x3907 as CPU model number.

2018-10-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* common/config/s390/s390-common.c: Rename PF_ARCH12 to PF_Z14.
	* config/s390/s390.h (enum processor_flags): Rename PF_ARCH12 to
	PF_Z14.  Rename TARGET_CPU_ARCH12 to TARGET_CPU_Z14,
	TARGET_CPU_ARCH12_P to TARGET_CPU_Z14_P, TARGET_ARCH12 to
	TARGET_Z14, and TARGET_ARCH12_P to TARGET_Z14_P.
	* config/s390/s390.md: Likewise. Rename also the cpu attribute
	value from arch12 to z14.

2018-10-02  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (fxam<mode>2_i387_with_temp): Remove.
	(isinfxf2): Ditto.
	(isinf<mode>2): Ditto.

2018-10-02  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (ix86_emit_i387_round): Extend op1 to XFmode
	before emitting fxam.  Perform calculations in XFmode.

2018-10-02  Marc Glisse  <marc.glisse@inria.fr>

	* match.pd (((X /[ex] A) +- B) * A): New transformation.

2018-10-02  Marc Glisse  <marc.glisse@inria.fr>

	PR middle-end/87319
	* fold-const.c (fold_plusminus_mult_expr): Handle complex and vectors.
	* tree.c (signed_or_unsigned_type_for): Handle complex.

2018-10-02  Jeff Law  <law@redhat.com>

	* gimple-fold.c (get_range_strlen): Remove dead code.

2018-10-02  Martin Sebor  <msebor@redhat.com>
	    Jeff Law  <law@redhat.com>

	* builtins.c (unterminated_array): Add new arguments.
	If argument is not terminated, bubble up size and exact
	state to callers.
	(expand_builtin_strnlen): Detect, avoid expanding
	and diagnose unterminated arrays.
	(c_strlen): Fill in offset of start of unterminated strings.
	* builtins.h (unterminated_array): Update prototype.

2018-10-02  Richard Biener  <rguenther@suse.de>

	* config/i386/sse.md (reduc_plus_scal_v4df): Avoid the use
	of haddv4df, first reduce to SSE width and exploit the fact
	that we only need element zero with the reduction result.
	(reduc_plus_scal_v2df): Likewise.

2018-10-02  Eric Botcazou  <ebotcazou@adacore.com>

	* dojump.h (do_jump): Delete.
	(do_jump_1): Likewise.
	(split_comparison): Move around.
	* dojump.c (do_jump): Make static.
	(do_jump_1): Likewise.
	(jumpifnot): Move around.
	(jumpifnot_1): Likewise.
	(jumpif): Likewise.
	(jumpif_1): Likewise.
	* expr.c (expand_expr_real_1): Call jumpif[not] instead of do_jump.

2018-10-02  Eric Botcazou  <ebotcazou@adacore.com>

	* reorg.c (make_return_insns): Use emit_copy_of_insn_after for the
	insns in the delay slot and add_insn_after for the jump insn.

2018-10-02  Richard Biener  <rguenther@suse.de>

	* tree-inline.c (expand_call_inline): Use the location of
	the callee declaration for the inline-entry marker.
	* final.c (notice_source_line): Remove special-casing of
	NOTE_INSN_INLINE_ENTRY.

2018-10-01  Carl Love  <cel@us.ibm.com>

	PR 69431
	* config/rs6000/rs6000-builtin.def (__builtin_mffsl): New.
	(__builtin_mtfsb0): New.
	(__builtin_mtfsb1): New.
	( __builtin_set_fpscr_rn): New.
	(__builtin_set_fpscr_drn): New.
	* config/rs6000/rs6000.c (rs6000_expand_mtfsb_builtin): Add.
	(rs6000_expand_set_fpscr_rn_builtin): Add.
	(rs6000_expand_set_fpscr_drn_builtin): Add.
	(rs6000_expand_builtin): Add case statement entries for
	RS6000_BUILTIN_MTFSB0, RS6000_BUILTIN_MTFSB1,
	RS6000_BUILTIN_SET_FPSCR_RN, RS6000_BUILTIN_SET_FPSCR_DRN,
	RS6000_BUILTIN_MFFSL.
	(rs6000_init_builtins): Add ftype initialization and def_builtin
	calls for __builtin_mffsl, __builtin_mtfsb0, __builtin_mtfsb1,
	__builtin_set_fpscr_rn, __builtin_set_fpscr_drn.
	* config/rs6000.md (rs6000_mtfsb0, rs6000_mtfsb1, rs6000_mffscrn,
	rs6000_mffscdrn): Add define_insn.
	(rs6000_set_fpscr_rn, rs6000_set_fpscr_drn): Add define_expand.
	* doc/extend.texi: Add documentation for the builtins.

2018-10-01  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87465
	* tree-ssa-loop-ivcanon.c (tree_estimate_loop_size): Fix typo
	causing branch miscounts.

2018-10-01  Tamar Christina  <tamar.christina@arm.com>

	* common/config/aarch64/aarch64-common.c (TARGET_OPTION_DEFAULT_PARAM,
	aarch64_option_default_param):	New.
	(params.h): Include.
	(TARGET_OPTION_VALIDATE_PARAM, aarch64_option_validate_param): New.
	* config/aarch64/aarch64.c (aarch64_override_options_internal): Simplify
	stack-clash protection validation code.

2018-10-01  Tamar Christina  <tamar.christina@arm.com>

	* params.c (validate_param): New.
	(add_params): Use it.
	(set_param_value): Refactor param validation into validate_param.
	(diagnostic.h): Include.
	* diagnostic.h (diagnostic_ready_p): New.

2018-10-01  Tamar Christina  <tamar.christina@arm.com>

	* params.c (set_param_value):
	Add index of parameter being validated.
	* common/common-target.def (option_validate_param): New.
	* common/common-targhooks.h (default_option_validate_param): New.
	* common/common-targhooks.c (default_option_validate_param): New.
	* doc/tm.texi.in (TARGET_OPTION_VALIDATE_PARAM): New.
	* doc/tm.texi: Regenerate.

2018-10-01  Tamar Christina  <tamar.christina@arm.com>

	PR target/86486
	* config/aarch64/aarch64.c (aarch64_override_options_internal):
	Add validation for stack-clash parameters and set defaults.

2018-10-01  Tamar Christina  <tamar.christina@arm.com>

	PR target/86486
	* configure.ac: Add stack-clash-protection-guard-size.
	* doc/install.texi: Document it.
	* config.in (DEFAULT_STK_CLASH_GUARD_SIZE): New.
	* params.def: Update comment for guard-size.
	(PARAM_STACK_CLASH_PROTECTION_GUARD_SIZE,
	PARAM_STACK_CLASH_PROTECTION_PROBE_INTERVAL): Update description.
	* configure: Regenerate.

2018-10-01  Tamar Christina  <tamar.christina@arm.com>

	PR target/86486
	* config/aarch64/aarch64.h (STACK_CLASH_MIN_BYTES_OUTGOING_ARGS,
	STACK_DYNAMIC_OFFSET): New.
	* config/aarch64/aarch64.c (aarch64_layout_frame):
	Update outgoing args size.
	(aarch64_stack_clash_protection_alloca_probe_range,
	TARGET_STACK_CLASH_PROTECTION_ALLOCA_PROBE_RANGE): New.

2018-10-01  Tamar Christina  <tamar.christina@arm.com>

	PR target/86486
	* explow.c (anti_adjust_stack_and_probe_stack_clash): Support custom
	probe ranges.
	* target.def (stack_clash_protection_alloca_probe_range): New.
	(stack_clash_protection_final_dynamic_probe): Remove.
	* targhooks.h (default_stack_clash_protection_alloca_probe_range) New.
	(default_stack_clash_protection_final_dynamic_probe): Remove.
	* targhooks.c: Likewise.
	* doc/tm.texi.in (TARGET_STACK_CLASH_PROTECTION_ALLOCA_PROBE_RANGE): New.
	(TARGET_STACK_CLASH_PROTECTION_FINAL_DYNAMIC_PROBE): Remove.
	* doc/tm.texi: Regenerate.

2018-10-01  Tamar Christina  <tamar.christina@arm.com>

	PR target/86486
	* config/aarch64/aarch64-protos.h (aarch64_output_probe_sve_stack_clash): New.
	* config/aarch64/aarch64.c (aarch64_output_probe_sve_stack_clash,
	aarch64_clamp_to_uimm12_shift): New.
	(aarch64_allocate_and_probe_stack_space): Add SVE specific section.
	* config/aarch64/aarch64.md (probe_sve_stack_clash): New.

2018-10-01  Tamar Christina  <tamar.christina@arm.com>

	PR target/86486
	* config/aarch64/aarch64.c (aarch64_layout_frame): Add assert.

2018-10-01  Jeff Law  <law@redhat.com>
	    Richard Sandiford <richard.sandiford@linaro.org>
	    Tamar Christina  <tamar.christina@arm.com>

	PR target/86486
	* config/aarch64/aarch64.md
	(probe_stack_range): Add k (SP) constraint.
	* config/aarch64/aarch64.h (STACK_CLASH_CALLER_GUARD,
	STACK_CLASH_MAX_UNROLL_PAGES): New.
	* config/aarch64/aarch64.c (aarch64_output_probe_stack_range): Emit
	stack probes for stack clash.
	(aarch64_allocate_and_probe_stack_space): New.
	(aarch64_expand_prologue): Use it.
	(aarch64_expand_epilogue): Likewise and update IP regs re-use criteria.
	(aarch64_sub_sp): Add emit_move_imm optional param.

2018-10-01  MCC CS <deswurstes@users.noreply.github.com>

	PR tree-optimization/87261
	* match.pd: Remove trailing whitespace.
	Add (x & y) | ~(x | y) -> ~(x ^ y),
	(~x | y) ^ (x ^ y) -> x | ~y and (x ^ y) | ~(x | y) -> ~(x & y)

2018-10-01  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (*add_n): Clean up pattern, update instruction
	constraints.
	(ashlsi3_insn): Update instruction constraints.
	(ashrsi3_insn): Likewise.
	(rotrsi3): Likewise.
	(add_shift): Likewise.
	* config/arc/constraints.md (Csz): New 32 bit constraint. It
	avoids placing in the limm field small constants which, otherwise,
	could end into a small instruction.

2018-10-01  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (maddsidi4_split): Don't use dmac if the
	destination register is not odd-even.
	(umaddsidi4_split): Likewise.

2018-10-01  Richard Biener  <rguenther@suse.de>

	* tree-inline.c (expand_call_inline): Store origin of fn
	in BLOCK_ABSTRACT_ORIGIN for the inline BLOCK.
	* tree.c (block_ultimate_origin): Simplify and do some
	checking.

2018-09-30  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (EMMS): New int iterator.
	(emms): New int attribute.
	(mmx_<emms>): Macroize insn from *mmx_emms and *mmx_femms using
	EMMS int iterator.  Explicitly declare clobbers.
	(mmx_emms): Remove expander.
	(mmx_femms): Ditto.
	* config/i386/predicates.md (emms_operation): Remove predicate.
	(vzeroall_pattern): New predicate.
	(vzeroupper_pattern): Rename from vzeroupper_operation.
	* config/i386/i386.c (ix86_avx_u128_mode_after): Use
	vzeroupper_pattern and vzeroall_pattern predicates.

2018-09-30  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/86939
	* ira-lives.c (make_hard_regno_born): Rename from this...
	(make_hard_regno_live): ... to this.  Remove update to conflict
	information.  Update function comment.
	(make_hard_regno_dead): Add conflict information update.  Update
	function comment.
	(make_object_born): Rename from this...
	(make_object_live): ... to this.  Remove update to conflict information.
	Update function comment.
	(make_object_dead):  Add conflict information update.  Update function
	comment.
	(mark_pseudo_regno_live): Call make_object_live.
	(mark_pseudo_regno_subword_live): Likewise.
	(mark_hard_reg_dead): Update function comment.
	(mark_hard_reg_live): Call make_hard_regno_live.
	(process_bb_node_lives): Likewise.
	* lra-lives.c (make_hard_regno_born): Rename from this...
	(make_hard_regno_live): ... to this.  Remove update to conflict
	information.  Remove now uneeded check_pic_pseudo_p argument.
	Update function comment.
	(make_hard_regno_dead): Add check_pic_pseudo_p argument and add update
	to conflict information.  Update function comment.
	(mark_pseudo_live): Remove update to conflict information.  Update
	function comment.
	(mark_pseudo_dead): Add conflict information update.
	(mark_regno_live): Call make_hard_regno_live.
	(mark_regno_dead): Call make_hard_regno_dead with new arguement.
	(process_bb_lives): Call make_hard_regno_live and make_hard_regno_dead.

2018-09-29  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87370
	* config/i386/i386.c (construct_container): Use TImode for
	BLKmode values in 2 integer registers.

2018-09-29  Jeff Law  <law@redhat.com>

	* builtins.c (unterminated_array): Pass in c_strlen_data * to
	c_strlen rather than just a tree *.
	(c_strlen): Change NONSTR argument to a c_strlen_data pointer.
	Update recursive calls appropriately.  If caller did not provide a
	suitable data pointer, create a local one.  When a non-terminated
	string is discovered, bubble up information about the string via the
	c_strlen_data object.
	* builtins.h (c_strlen): Update prototype.
	(c_strlen_data): New structure.
	* gimple-fold.c (get_range_strlen): Update calls to c_strlen.
	For a type 2 call, if c_strlen indicates a non-terminated string
	use the length of the non-terminated string.
	(gimple_fold_builtin_stpcpy): Update calls to c_strlen.

2018-09-29  Jakub Jelinek  <jakub@redhat.com>

	PR target/87467
	* config/i386/avx512fintrin.h (_mm512_abs_pd, _mm512_mask_abs_pd): Use
	__m512d type for __A argument rather than __m512.

2018-09-28  John David Anglin  <danglin@gcc.gnu.org>

	* match.pd (simple_comparison): Don't optimize if either operand is
	a function pointer when target needs function pointer canonicalization.

2018-09-28  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/driver-rs6000.c (asm_names): Adjust the entries for
	power5 .. power9 to remove indirection.
	* config/rs6000/rs6000.h (ASM_CPU_POWER5_SPEC, ASM_CPU_POWER6_SPEC,
	ASM_CPU_POWER7_SPEC, ASM_CPU_POWER8_SPEC, ASM_CPU_POWER9_SPEC,
	ASM_CPU_476_SPEC): Delete.
	(ASM_CPU_SPEC): Adjust.
	(EXTRA_SPECS): Delete asm_cpu_power5, asm_cpu_power6, asm_cpu_power7,
	asm_cpu_power8, asm_cpu_power9, asm_cpu_476.

2018-09-28  Segher Boessenkool  <segher@kernel.crashing.org>

	* config.in: Delete HAVE_AS_DCI.
	* config/powerpcspe/powerpcspe.h: Treat HAVE_AS_DCI as always true.
	* config/rs6000/rs6000.h: Ditto.
	* configure.ac: Delete HAVE_AS_DCI.
	* configure: Regenerate.

2018-09-28  Segher Boessenkool  <segher@kernel.crashing.org>

	* config.in (HAVE_AS_LWSYNC): Delete.
	* config/powerpcspe/powerpcspe.h (TARGET_LWSYNC_INSTRUCTION): Delete.
	* config/powerpcspe/sync.md (*lwsync): Always generate lwsync, never
	do it as a .long .
	* config/rs6000/rs6000.h (TARGET_LWSYNC_INSTRUCTION): Delete.
	* config/rs6000/sync.md (*lwsync): Always generate lwsync, never do it
	as a .long .
	* configure.ac: Delete HAVE_AS_LWSYNC.
	* configure: Regenerate.

2018-09-28  Eric Botcazou  <ebotcazou@adacore.com>
	    Pierre-Marie de Rodat  <derodat@adacore.com>

	* calls.c (expand_call): Try to do a tail call for thunks at -O0 too.
	* cgraph.h (struct cgraph_thunk_info): Add indirect_offset.
	(cgraph_node::create_thunk): Add indirect_offset parameter.
	(thunk_adjust): Likewise.
	* cgraph.c (cgraph_node::create_thunk): Add indirect_offset parameter
	and initialize the corresponding field with it.
	(cgraph_node::dump): Dump indirect_offset field.
	* cgraphclones.c (duplicate_thunk_for_node): Deal with indirect_offset.
	* cgraphunit.c (cgraph_node::analyze): Be prepared for external thunks.
	(thunk_adjust): Add indirect_offset parameter and deal with it.
	(cgraph_node::expand_thunk): Deal with the indirect_offset field and
	pass it to thunk_adjust.  Do not call the target hook if it's non-zero
	or if the thunk is external or local.  Fix formatting.  Do not chain
	the RESULT_DECL to BLOCK_VARS.  Pass the static chain to the target,
	if any, in the GIMPLE representation.
	* ipa-icf.c (sem_function::equals_wpa): Deal with indirect_offset.
	* lto-cgraph.c (lto_output_node): Write indirect_offset field.
	(input_node): Read indirect_offset field.
	* tree-inline.c (expand_call_inline): Pass indirect_offset field in the
	call to thunk_adjust.
	* tree-nested.c (struct nesting_info): Add thunk_p field.
	(create_nesting_tree): Set it.
	(convert_all_function_calls): Copy static chain from targets to thunks.
	(finalize_nesting_tree_1): Return early for thunks.
	(unnest_nesting_tree_1): Do not finalize thunks.
	(gimplify_all_functions): Do not gimplify thunks.

2018-09-28  David Malcolm  <dmalcolm@redhat.com>

	* opt-suggestions.c (option_proposer::build_option_suggestions):
	Release	"option_values".

2018-09-28  David Malcolm  <dmalcolm@redhat.com>

	* coverage.c (get_coverage_counts): Convert problem-reporting dump
	messages from MSG_OPTIMIZED_LOCATIONS to MSG_MISSED_OPTIMIZATION.
	* dumpfile.c (kind_as_string): New function.
	(dump_loc): Rather than a hardcoded prefix of "note: ", use
	kind_as_string to vary the prefix based on dump_kind.
	(selftest::test_capture_of_dump_calls): Update for above.

2018-09-28  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (SSE_REGNO): Fix check for FIRST_REX_SSE_REG.
	(GET_SSE_REGNO): Rename from SSE_REGNO.  Update all uses for rename.

2018-09-28  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (CC_REGNO): Remove FPSR_REG.
	* config/i386/i386.c (ix86_fixed_condition_code_regs): Use
	INVALID_REGNUM instead of FPSR_REG.
	(ix86_md_asm_adjust): Do not clobber FPSR_REG.
	* config/i386/i386.md: Update comment of FP compares.
	(fldenv): Do not clobber FPSR_REG.

2018-09-28  Richard Biener  <rguenther@suse.de>

	* tree.h (BLOCK_ORIGIN): New.
	* omp-expand.c (grid_expand_target_grid_body): Assign
	BLOCK_ORIGIN to BLOCK_ABSTRACT_ORIGIN.
	* tree-inline.c (remap_block): Likewise.
	* auto-profile.c (get_function_decl_from_block): Simplify
	by eliding the BLOCK_ABSTRACT_ORIGIN chasing.
	* langhooks.c (lhd_print_error_function): Likewise.
	* optinfo-emit-json.cc (optrecord_json_writer::inlining_chain_to):
	Likewise.
	* tree-ssa-live.c (remove_unused_scope_block_p): Likewise.
	* tree.c (block_nonartificial_location): Likewise.
	(block_ultimate_origin): Likewise.
	* tree-pretty-print.c (percent_K_format): Likewise.  Remove
	no longer needed LTO case.

2018-09-28  Andrew Stubbs  <ams@codesourcery.com>
	    Jan Hubicka  <jh@suse.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* simplify-rtx.c (simplify_merge_mask): New function.
	(simplify_ternary_operation): Use it, also see if VEC_MERGEs with the
	same masks are used in op1 or op2.
	(test_vec_merge): New function.
	(test_vector_ops): Call test_vec_merge.

2018-09-28  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc-protos.h (sparc_branch_cost): Declare.
	* config/sparc/sparc.h (BRANCH_COST): Call sparc_branch_cost.
	* config/sparc/sparc.c (struct processor_costs): Add branch_cost field.
	(cypress_costs): Set it.
	(supersparc_costs): Likewise.
	(hypersparc_costs): Likewise.
	(leon_cost): Likewise.
	(leon3_costs): Likewise.
	(sparclet_costs): Likewise.
	(ultrasparc_costs): Likewise.
	(ultrasparc_costs): Likewise.
	(niagara_costs): Likewise.
	(niagara2_costs): Likewise.
	(niagara3_costs): Likewise.
	(niagara4_costs): Likewise.
	(niagara7_costs): Likewise.
	(m8_costs): Likewise.
	(TARGET_CAN_FOLLOW_JUMP): Define.
	(pass_work_around_errata::gate): Minor tweak.
	(sparc_option_override): Remove MASK_FSMULD mask for V7 processors.
	Do not set both MASK_VIS4 and MASK_VIS4B for M8 processor.
	Automaitcally clear MASK_FSMULD mask for V7 processors.
	(sparc_can_follow_jump): New static function.
	(output_ubranch): Deal with CROSSING_JUMP_P.
	(sparc_use_sched_lookahead): Rewrite using switch statement.
	(sparc_issue_rate): Reorder.
	(sparc_branch_cost): New function.

2018-09-27  Martin Sebor  <msebor@redhat.com>

	* tree.h (tree_to_shwi): Add attribute nonnull and pure.
	(tree_to_poly_int64, tree_to_uhwi, tree_to_poly_uint64): Same.
	(int_fits_type_p): Same.

2018-09-27  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (FPCR_REG): Remove.
	(UNSPEC_FLDCW): Remove.
	(x86_fnstcw_1): Use (const_int 0) instead of FPCR_REG.
	(x86_fldcw_1): Remove insn pattern.
	(fnstenv): Do not clobber FPCR_REG.
	(fldenv): Ditto.
	* config/i386/i386.h (FIXED_REGISTERS) Remove fpsr register.
	(CALL_USED_REGISTERS): Ditto.
	(REG_ALLOC_ORDER): Ditto.
	(REG_CLASS_CONTENTS): Ditto.
	(HI_REGISTER_NAMES): Ditto.
	(ADDITIONAL_REGISTER_NAMES): Use defines instead
	of numerical constants.
	* config/i386/i386.c (regclass_map): Remove fpsr register.
	(dbx_register_map): Ditto.
	(dbx64_register_map): Ditto.
	(svr4_dbx_register_map): Ditto.
	(print_reg): Do not handle FPCR_REG.

2018-09-27  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/87149
	* config.in (HAVE_AS_CMPB, HAVE_AS_DFP, HAVE_AS_FPRND, HAVE_AS_MFPGPR,
	HAVE_AS_POPCNTB, HAVE_AS_POPCNTD, HAVE_AS_POWER8, HAVE_AS_POWER9):
	Delete, always treat as true.
	* config/powerpcspe/powerpcspe.c (rs6000_option_override_internal):
	Ditto.  Simplify remaining code.
	* config/powerpcspe/powerpcspe.h: Ditto.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Ditto.
	Simplify remaining code.
	(rs6000_expand_builtin): Ditto.
	* config/rs6000/rs6000.h: Ditto.
	* configure.ac: Ditto.
	* configure: Regenerate.

2018-09-27  Martin Liska  <mliska@suse.cz>

	* coverage.c (get_coverage_counts): Revert the formatting
	of missing profile opt info.

2018-09-27  Richard Biener  <rguenther@suse.de>

	PR debug/37801
	PR debug/87440
	* dwarf2out.c (set_block_origin_self): Do not mark outermost
	block as we do not output that.
	(gen_inlined_subroutine_die): Elide the originally outermost
	block, matching what we do for concrete instances.
	(decls_for_scope): Add parameter specifying whether to recurse
	to subblocks.

2018-09-27  Andrew Stubbs  <ams@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	PR 82089

	* expmed.c (emit_cstore): Fix handling of result_mode == BImode and
	STORE_FLAG_VALUE == 1.

2018-09-27  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md (PPA_TX_ABORT, PPA_OOO_BARRIER): New
	constant definitions.
	("tx_assist"): Replace magic number with PPA_TX_ABORT.
	("*ppa"): Enable pattern also for -march=zEC12 -mno-htm.
	("speculation_barrier"): New expander definition.

2018-09-26  Indu Bhagat  <indu.bhagat@oracle.com>

	PR gcov-profile/86957
	* common.opt: New warning option -Wmissing-profile.
	* coverage.c (get_coverage_counts): Add warning for missing .gcda file.
	* doc/invoke.texi: Document -Wmissing-profile.

2018-09-26  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.md (subsi3_extended2): Add J constraint.
	(negdi2, negsi2, negsi2_extended, negsi2_extended2): New.

2018-09-26  Martin Sebor  <msebor@redhat.com>

	* tree.c (zerop): Change return type to bool.
	(integer_zerop, integer_onep, integer_each_onep): Same.
	(integer_all_onesp, integer_minus_onep, integer_pow2p): Same.
	(integer_nonzerop, integer_truep, tree_ctz, real_zerop): Same.
	(real_onep, real_minus_onep, chain_index): Same.
	(print_type_hash_statistics, type_list_equal): Same.
	* tree.h (zerop): Same.
	(zerop, integer_zerop, integer_onep, integer_each_onep): Same.
	(integer_all_onesp, integer_minus_onep, integer_pow2p): Same.
	(integer_nonzerop, integer_truep, tree_ctz, real_zerop): Same.
	(real_onep, real_minus_onep, chain_index): Same.
	(print_type_hash_statistics, type_list_equal): Same.

2018-09-26  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.h (FUNCTION_ARG_REGNO_P): Fix comment.

2018-09-26  Jakub Jelinek  <jakub@redhat.com>

	PR target/87414
	* config/i386/i386.c: Include debug.h and dwarf2out.h.
	(output_indirect_thunk): Emit DW_CFA_def_cfa_offset after the
	call.

2018-09-25  Andrew Stubbs  <ams@codesourcery.com>

	* builtins.c (get_builtin_sync_mem): Force address mode conversion.

2018-09-26  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (enum reg_class): Remove FP_TOP_SSE_REGS
	and FP_SECOND_SSE_REGS.
	(REG_CLASS_NAMES): Ditto.
	(REG_CLASS_CONTENTS): Ditto.
	* config/i386/i386.c (ix86_preferred_reload_class) Do not handle
	FP_TOP_SSE_REGS and FP_SECOND_SSE_REGS classes.
	(ix86_preferred_output_reload_class): Ditto.
	* config/i386/i386.md (fix_trunc<mode>_i387_fisttp): Change "=&1f"
	clobber constraint to "=&f".
	(fix_truncdi_i387): Ditto.
	(lrintxfdi2): Ditto.
	(fistdi2_<rounding>): Ditto.
	(fpremxf4_i387): Change "=u" constraint to "=f".
	(fprem1xf4_i387): Ditto.
	(sincosxf3): Ditto.
	(fptanxf4_i387): Ditto.
	(fxtractxf3_i387): Ditto.
	(fscalexf4_i387): Ditto.
	(atan2xf3): Change "u" constraint to "f".
	(fyl2xxf3_i387): Ditto.
	(fyl2xp1xf3_i387): Ditto.

2018-09-26  Uros Bizjak  <ubizjak@gmail.com>

	PR target/87439
	* config/i386/i386.h (NUM_MODES_FOR_MODE_SWITCHING): Update
	for removed I387_MASK_PM entity.


2018-09-26  Jeff Law  <law@redhat.com>
	Revert
	2018-09-26  Alexey Neyman  <stilor@att.net>

	* graphite.h: Include <isl/id.h> and <isl/space.h>; these
	headers are no longer pulled in by <isl/val.h>.

2018-09-26  Richard Biener  <rguenther@suse.de>

	PR debug/87443
	* dwarf2out.c (gen_lexical_block_die): Do not equate inline
	or concrete instance DIE to the tree.  Create abstract origin
	attributes also for concrete instances.

2018-09-26  Alexey Neyman  <stilor@att.net>

	* graphite.h: Include <isl/id.h> and <isl/space.h>; these
	headers are no longer pulled in by <isl/val.h>.

2018-09-26  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/arm/arm.c (arm_split_compare_and_swap, arm_split_atomic_op):
	Use new helper functions.
	* config/arm/sync.md (atomic_load<mode>, atomic_store<mode>):
	Use new helper functions.
	* config/arm/aarch-common-protos.h (aarch_mm_needs_acquire,
	aarch_mm_needs_release): New declarations.
	* config/arm/aarch-common.c (aarch_mm_needs_acquire,
	aarch_mm_needs_release): New.

2018-09-26  Eric Botcazou  <ebotcazou@adacore.com>

	* config/arm/arm.c (arm_reorg): Skip Thumb reorg pass for thunks.
	(arm32_output_mi_thunk): Deal with long calls.

2018-09-26  Richard Biener  <rguenther@suse.de>

	PR debug/87428
	PR debug/87362
	* tree-inline.c (expand_call_inline): When the location
	of the call is UNKNOWN_LOCATION use DECL_SOURCE_LOCATION
	or BUILTINS_LOCATION for the BLOCK_SOURCE_LOCATION of
	the inserted BLOCK to make inlined_function_outer_scope_p
	recognize it.
	* dwarf2out.c (add_call_src_coords_attributes): Do not add
	coords for reserved locations.

2018-09-25  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (*movcc_internal1): Use set_attr_alternative.
	(*call_indirect_nonlocal_sysv<mode>): Ditto.
	(*call_value_indirect_nonlocal_sysv<mode>): Ditto.
	(*sibcall_nonlocal_sysv<mode>): Ditto.
	(*sibcall_value_nonlocal_sysv<mode>): Ditto.
	(<bd>_<mode>): Ditto.
	(<bd>tf_<mode>): Ditto.

2018-09-25  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md (*altivec_mov<mode>): Write the output
	control string as a list of templates instead of as C code.
	(*altivec_movti): Ditto.
	* config/rs6000/darwin.md (movdf_low_di): Ditto.

2018-09-25  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_split_symbol): Mark auipc label as weak
	when target symbol is weak.

2018-09-25  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR c/87387
	* builtins.c (unterminated_array): Simplify.
	* expr.c (string_constant): Handle SSA_NAME.  Add more exceptions
	where pointer arithmetic is safe.

2018-09-25  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/86987
	* config/rs6000/altivec.md (altivec_vspltb): Use
	const_0_to_15_operand instead of u5bit_cint_operand.
	(*altivec_vspltb_internal): Ditto.
	(altivec_vspltb_direct): Ditto.
	(altivec_vsplth): Use const_0_to_7_operand instead of
	u5bit_cint_operand.
	(*altivec_vsplth_internal): Ditto.
	(altivec_vsplth_direct): Ditto.
	(altivec_vspltw): Use const_0_to_3_operand instead of
	u5bit_cint_operand.
	(*altivec_vspltw_internal): Ditto.
	(altivec_vspltw_direct): Ditto.
	(altivec_vspltsf): Ditto.
	(*altivec_vspltsf_internal): Ditto.
	* config/rs6000/rs6000.c (rs6000_expand_binop_builtin): Handle the
	various splats with the proper size immediate.  Reorder the various
	cases by ascending size of immediate, and put all such together.

2018-09-25  Richard Biener  <rguenther@suse.de>

	PR debug/83941
	* dwarf2out.c (add_AT_external_die_ref): Remove now redundant
	GC-ification.
	(maybe_create_die_with_external_ref): Do not create
	DW_TAG_imported_unit here.
	(add_abstract_origin_attribute): Handle external BLOCK refs.
	(dwarf2out_abstract_function): Simplify LTO case.
	(dwarf2out_early_finish): Create DW_TAG_imported_unit explicitely
	rather than using maybe_create_die_with_external_ref.

2018-09-25  Uros Bizjak  <ubizjak@gmail.com>

	PR target/71278
	* config/i386/i386.md (frndintxf2_mask_pm): Remove.
	(frndintxf2_mask_pm_i387): Ditto.
	(nearbyintxf2): Rewrite expander pattern to match rintxf2.
	Enable for !flag_trapping_math.
	(nearbyint<mode>2): Enable x87 modes for !flag_trapping_math.
	Enable SSE modes for TARGET_SSE4_1 and expand them with round insn.
	Change operand 1 predicate to nonimmediate_operand.
	(attr "i387_cw"): Remove mask_pm.
	* config/i386/i386.h (enum ix86_stack_slot): Remove SLOT_CW_MASK_PM.
	(enum ix86_entity): Remove I387_MASK_PM.
	* config/i386/i386.c (ix86_i387_mode_needed): Do not
	handle I387_MASK_PM.
	(ix86_mode_needed): Ditto.
	(ix86_mode_after): Ditto.
	(ix86_mode_entry): Ditto.
	(ix86_mode_exit): Ditto.
	(emit_i387_cw_initialization): Do not handle I387_CW_MASK_PM.

2018-09-25  Jakub Jelinek  <jakub@redhat.com>

	* vr-values.c (vr_values::vr_values): Initialize to_remove_edges and
	to_update_switch_stmts to vNULL instead of calling create on them
	immediately.

2018-09-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87402
	* tree-ssa-sccvn.c (SSA_VISITED): Remove unused function.
	(visit_phi): Re-instantiate handling of supposed to be VARYING
	but non-VARYING backedge value.

2018-09-25  Richard Biener  <rguenther@suse.de>

	PR debug/83941
	* dwarf2out.c (struct sym_off_pair): New.
	(external_die_map): New global.
	(lookup_decl_die): When in LTO create DIEs lazily from the
	external_die_map.
	(lookup_block_die): New function, create DIEs lazily in LTO.
	(equate_block_to_die): New function.
	(dwarf2out_die_ref_for_decl): During WPA get the association
	from the external DIE map.
	(dwarf2out_register_external_die): Record mapping into the
	external DIE map.
	(maybe_create_die_with_external_ref): New function split out from
	DIE generation part of old dwarf2out_register_external_die.
	(add_abstract_origin_attribute): Do not return the DIE.  When
	in LTO reference externals directly.
	(dwarf2out_abstract_function): When in LTO ignore calls for
	decls with external DIEs (already present abstract instances).
	(gen_call_site_die): Adjust.
	(add_high_low_attributes): Likewise.
	(gen_lexical_block_die): Likewise.
	(gen_inlined_subroutine_die): Likewie.
	(gen_block_die): Likewise.
	(dwarf2out_inline_entry): Likewise.
	(dwarf2out_early_finish): In LTRANS phase create DW_TAG_imported_unit
	DIEs.

2018-09-25  Martin Liska  <mliska@suse.cz>

	* ipa-fnsummary.c (estimate_node_size_and_time): Scale by two
	integers and not by a float value.

2018-09-25  Martin Liska  <mliska@suse.cz>

	PR fortran/87394
	* dbgcnt.c (dbg_cnt_process_single_pair): Return false
	instead of NULL.
	* dumpfile.c (dump_enable_all): Remove extra parenthesis.
	* gcov-tool.c: Declare the function with ATTRIBUTE_NORETURN.
	* godump.c (go_format_type): Remove extra parenthesis.

2018-09-25  Martin Liska  <mliska@suse.cz>

	* alias.c (set_dest_equal_p): Remove unused function.
	* config/i386/i386.c (def_builtin_pure2): Likewise.
	* diagnostic-show-locus.c (class layout): Remove
	unused field.
	(layout::layout): Likewise here.
	* dump-context.h (class temp_dump_context): Likewise.
	* dwarf2out.c (add_AT_fde_ref): Remove unused function.
	(add_AT_loclistsptr): Likewise.
	(add_AT_offset): Likewise.
	(get_AT_hi_pc): Likewise.
	(is_comdat_die): Likewise.
	(type_is_enum): Likewise.
	(ceiling): Likewise.
	(add_AT_vms_delta): Likewise.
	(is_class_die): Likewise.
	* edit-context.c (class line_event): Remove unused field.
	* graphite-sese-to-poly.c (tree_int_to_gmp): Remove
	unused function.
	* ipa-cp.c (ipa_get_vr_lat): Likewise.
	* lra-constraints.c (ok_for_index_p_nonstrict): Likewise.
	(ok_for_base_p_nonstrict): Likewise.
	* tree-chrec.c (is_not_constant_evolution): Likewise.
	(chrec_fold_poly_cst): Likewise.
	* tree-if-conv.c (has_pred_critical_p): Likewise.
	* tree-ssa-coalesce.c (print_exprs): Likewise.
	* tree-ssa-pre.c (bitmap_set_contains_expr): Likewise.
	* tree-ssa-uninit.c (is_and_or_or_p): Likewise.
	* tree-vrp.c (value_ranges_intersect_p): Likewise.
	(value_range_nonnegative_p): Likewise.

2018-09-25  Martin Liska  <mliska@suse.cz>

	* config/powerpcspe/powerpcspe.c (rs6000_output_function_epilogue):
	Do not handle "GNU Pascal".
	* config/rs6000/rs6000.c (rs6000_output_function_epilogue):
	Likewise.
	* config/sparc/sparc.c (sparc_pass_by_reference): Remove Pascal
	from documentation. Likewise.
	* dbxout.c (dbxout_range_type): Likewise.
	* doc/cpp.texi: Likewise.
	* doc/extend.texi: Likewise.
	* doc/frontends.texi: Likewise.
	* doc/invoke.texi: Remove Pascal entry.
	* tree.def (CLEANUP_POINT_EXPR): Likewise.
	* doc/rtl.texi (MODE_FUNCTION): Remove not used entry.

2018-09-25  Martin Liska  <mliska@suse.cz>

	PR middle-end/86078
	* doc/invoke.texi: Document all parameters and remove default
	of the parameters.

2018-09-25  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR bootstrap/87417
	* rtl.c (rtx_code_size): Take into account that EQ_ATTR_ALT
	contains HOST_WIDE_INTs when computing its size.

2018-09-24  Jim Wilson  <jimw@sifive.com>

	PR target/87391
	* config/riscv/riscv.h (STACK_BOUNDARY): Test riscv_abi == ABI_ILP32E
	not TARGET_RVE.
	(ABI_STACK_BOUNDARY, MAX_ARGS_IN_REGISTERS): Likewise.

2018-09-24  Andrew Pinski  <apinski@marvell.com>

	*  config/aarch64/aarch64.c (aarch_macro_fusion_pair_p): Don't
	access prev before checking it for NULLness in the
	AARCH64_FUSE_CMP_BRANCH case.

2018-09-24  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/82699
	* config/i386/i386.c (rest_of_insert_endbranch): Set
	endbr_queued_at_entrance to true and don't insert ENDBR if
	x86_function_profiler will be called.
	(x86_function_profiler): Insert ENDBR if endbr_queued_at_entrance
	is true.
	* config/i386/i386.h (machine_function): Add
	endbr_queued_at_entrance.

2018-09-24  Ilya Leoshkevich  <iii@linux.ibm.com>

	* genattrtab.c (mk_attr_alt): Use alternative_mask.
	(attr_rtx_1): Adjust caching to match the new EQ_ATTR_ALT field
	types.
	(check_attr_test): Use alternative_mask.
	(get_attr_value): Likewise.
	(compute_alternative_mask): Use alternative_mask and XWINT.
	(make_alternative_compare): Use alternative_mask.
	(attr_alt_subset_p): Use XWINT.
	(attr_alt_subset_of_compl_p): Likewise.
	(attr_alt_intersection): Use alternative_mask and XWINT.
	(attr_alt_union): Likewise.
	(attr_alt_complement): Use HOST_WIDE_INT and XWINT.
	(mk_attr_alt): Use alternative_mask and HOST_WIDE_INT.
	(simplify_test_exp): Use alternative_mask and XWINT.
	(write_test_expr): Use alternative_mask and XWINT, adjust bit
	number calculation to support 64 bits.  Generate code that
	checks 64-bit masks.
	(main): Use alternative_mask.
	* rtl.def (EQ_ATTR_ALT): Change field types from ii to ww.

2018-09-24  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/80080
	* config/s390/s390.c (s390_emit_epilogue): Do not use PARALLEL
	RETURN+USE when returning via %r14.

2018-09-24  Martin Liska  <mliska@suse.cz>

	* gcov.c (output_lines): Print colorization legend
	for both flag_use_colors and flag_use_hotness_colors.
	Reword the help.

2018-09-24  Martin Liska  <mliska@suse.cz>

	* coverage.c (get_coverage_counts): Use warning_at
	with current_function_decl location. Use %qD in warning
	message.

2018-09-24  Martin Liska  <mliska@suse.cz>

	* memory-block.h (memory_block_pool::release): Annotate with
	valgrind that the memory is not accessible.

2018-09-24  Martin Liska  <mliska@suse.cz>

	PR sanitizer/85774
	* asan.c: Make asan_handled_variables extern.
	* asan.h: Likewise.
	* cfgexpand.c (expand_stack_vars): Make sure
	a representative is unpoison if another
	variable in the partition is handled by
	use-after-scope sanitization.

2018-09-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/63155
	* tree-ssa-propagate.c (add_ssa_edge): Avoid adding PHIs to
	the worklist when the edge of the respective argument isn't
	executable.

2018-09-23   Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (enum reg_class): Rename MASK_REGS to
	ALL_MASK_REGS and MASK_EVEX_REGS to MASK_REGS.
	(MASK_CLASS_P): Update for rename.
	(MAYBE_MASK_CLASS_P): Ditto.
	(REG_CLASS_NAMES): Update.
	(REG_CLASS_CONTENT): Update.
	* config/i386/i386.c (regclass_map): Update for MASK_REG
	and ALL_MASK_REGS rename.
	* config/i386/constraints.md (Yk): Update for rename.
	(k): Ditto.

2018-09-23   Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (enum reg_class): Remove
	EVEX_SSE_REGS and MOD4_SSE_REGS.
	(REG_CLASS_NAMES): Update.
	(REG_CLASS_CONTENT): Update.
	* config/i386/i386.c (regclass_map): Declare AVX-512 SSE
	registers as ALL_SSE_REGS.
	(ix86_additional_allocno_class_p): Remove.
	(TARGET_ADDITIONAL_ALLOCNO_CLASS_P): Remove.
	(ix86_register_priority): Lower priority of EVEX SSE registers.
	Use IN_RANGE macro where appropriate.
	(ix86_hard_regno_mode_ok): Merge AVX-5124FMAPS and
	AVX-5124VNNIW checks.
	(ix86_modes_tieable_p): Tie 512-bit SSE modes.
	* config/i386/sse.md (avx5124fmaddps_4fmaddps)
	(avx5124fmaddps_4fmaddps_mask, avx5124fmaddps_4fmaddps_maskz)
	(avx5124fmaddps_4fmaddss, avx5124fmaddps_4fmaddss_mask)
	(avx5124fmaddps_4fmaddss_maskz, avx5124fmaddps_4fnmaddps)
	(avx5124fmaddps_4fnmaddps_mask, avx5124fmaddps_4fnmaddps_maskz)
	(avx5124fmaddps_4fnmaddss, avx5124fmaddps_4fnmaddss_mask)
	(avx5124fmaddps_4fnmaddss_maskz, avx5124vnniw_vp4dpwssd)
	(avx5124vnniw_vp4dpwssd_mask, avx5124vnniw_vp4dpwssd_maskz)
	(avx5124vnniw_vp4dpwssds, avx5124vnniw_vp4dpwssds_mask)
	(avx5124vnniw_vp4dpwssds_maskz): Use "v" instead of "Yh" constraint.
	* config/i386/constraints.md (Yh): Remove.

2018-09-23   Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (regclass_map): Declare integer REX registers
	as GENERAL_REGS.

2018-09-23  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/service.texi (Service): Switch the fsf.org link to https.

2018-09-22  Chung-Ju Wu  <jasonwucj@gmail.com>

	PR target/86798
	* config/nds32/nds32.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

2018-09-21  Florian Weimer  <fweimer@redhat.com>

	PR middle-end/81035
	* doc/extend.texi (Common Function Attributes): Mention that
	noreturn suppresses tail call optimization.

2018-09-21  Jeff Law  <law@redhat.com>

	* gimple-ssa-evrp.c (evrp_dom_walker::cleanup): Call
	vr_values::cleanup_edges_and_switches.
	* tree-vrp.c (to_remove_edges, to_update_switch_stmts): Moved into
	vr_values class.
	(identify_jump_threads): Remove EDGE_IGNORE handling.
	(execute_vrp): Move handling of to_remove_edges and
	to_update_switch_stmts into vr_values class member functions.
	* tree-vrp.h (switch_update, to_remove_edges): Remove declarations.
	(to_update_switch_stmts): Likewise.
	* vr-values.c: Include cfghooks.h.
	(vr_values::vr_values): Initialize to_remove_edges and
	to_update_switch_stmts.
	(vr_values::~vr_values): Verify to_remove_edges and
	to_update_switch_stmts are empty.
	(vr_values::simplify_switch_using_ranges): Set EDGE_IGNORE as needed.
	(vr_values::cleanup_edges_and_switches): New member function.
	* vr-values.h (vr_values): Add cleanup_edges_and_switches member
	function.  Add new data members.

2018-09-21  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/87309
	* dumpfile.c (dump_context::begin_scope): Filter the dump_loc
	calls with pflags and alt_flags.
	(selftest::test_capture_of_dump_calls): Add test of interaction of
	MSG_OPTIMIZED_LOCATIONS with AUTO_DUMP_SCOPE.

2018-09-21  Olivier Hainque  <hainque@adacore.com>

	* config.gcc: Factorize and comment inclusion of vxworks-dummy.h.

2018-09-21  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h (CLEAR_INSN_CACHE): #define to 1.

2018-09-21  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h (VXWORKS_LIBGCC_SPEC): Remove -lc_internal.
	Merge block comment with the one ahead of VXWORKS_LIBS_RTP. Then:
	(VXWORKS_LIBS_RTP): Minor reordering.

2018-09-21  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h (STARTFILE_PREFIX_SPEC): Define.
	(VXWORKS_LIBS_DIR_RTP): Remove definition and use.

2018-09-21  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h (SIZE_TYPE): Account for TARGET_VXWORKS64.
	(PTRDIFF_TYPE): Likewise.

2018-09-21  Olivier Hainque  <hainque@adacore.com>

	* config.gcc: Enforce def of TARGET_VXWORKS64 to 1 from
	triplet, similar to support for VxWorks7.
	* config/vxworks-dummy.h: Provide a default definition
	of TARGET_VXWORKS64 to 0.

2018-09-21  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks.h (TARGET_VXWORKS7): Move default definition ...
	* config/vxworks-dummy.h: here.

2018-09-21  Olivier Hainque  <hainque@adacore.com>

	* config.gcc: Prepend vxworks-dummy.h to tm_file for powerpc*

2018-09-21  Shaokun Zhang  <zhangshaokun@hisilicon.com>
	    Bo Zhou  <zbo.zhou@hisilicon.com>

	* config/aarch64/aarch64-cores.def (tsv110): New CPU.
	* config/aarch64/aarch64-tune.md: Regenerated.
	* doc/invoke.texi (AArch64 Options/-mtune): Add "tsv110".
	* config/aarch64/aarch64.c (tsv110_tunings): New tuning table.
	* config/aarch64/aarch64-cost-tables.h: Add "tsv110" extra costs.

2018-09-21  Andrew Stubbs  <ams@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>

	* builtins.c (get_builtin_sync_mem): Handle address spaces.

2018-09-21  Eric Botcazou  <ebotcazou@adacore.com>

	* config/rs6000/rs6000.c (rs6000_function_ok_for_sibcall): Return false
	if the call takes a static chain.

2018-09-21  Martin Liska  <mliska@suse.cz>

	* auto-profile.c (autofdo_source_profile::read): Do not
	set sum_all.
	(read_profile): Do not add working sets.
	(read_autofdo_file): Remove sum_all.
	(afdo_callsite_hot_enough_for_early_inline): Remove const
	qualifier.
	* coverage.c (struct counts_entry): Remove gcov_summary.
	(read_counts_file): Read new GCOV_TAG_OBJECT_SUMMARY,
	do not support GCOV_TAG_PROGRAM_SUMMARY.
	(get_coverage_counts): Remove summary and expected
	arguments.
	* coverage.h (get_coverage_counts): Likewise.
	* doc/gcov-dump.texi: Remove -w option.
	* gcov-dump.c (dump_working_sets): Remove.
	(main): Do not support '-w' option.
	(print_usage): Likewise.
	(tag_summary): Likewise.
	* gcov-io.c (gcov_write_summary): Do not dump
	histogram.
	(gcov_read_summary): Likewise.
	(gcov_histo_index): Remove.
	(gcov_histogram_merge): Likewise.
	(compute_working_sets): Likewise.
	* gcov-io.h (GCOV_TAG_OBJECT_SUMMARY): Mark
	it not obsolete.
	(GCOV_TAG_PROGRAM_SUMMARY): Mark it obsolete.
	(GCOV_TAG_SUMMARY_LENGTH): Adjust.
	(GCOV_HISTOGRAM_SIZE): Remove.
	(GCOV_HISTOGRAM_BITVECTOR_SIZE): Likewise.
	(struct gcov_summary): Simplify rapidly just
	to runs and sum_max fields.
	(gcov_histo_index): Remove.
	(NUM_GCOV_WORKING_SETS): Likewise.
	(compute_working_sets): Likewise.
	* gcov-tool.c (print_overlap_usage_message): Remove
	trailing empty line.
	* gcov.c (read_count_file): Read GCOV_TAG_OBJECT_SUMMARY.
	(output_lines): Remove program related line.
	* ipa-profile.c (ipa_profile): Do not consider GCOV histogram.
	* lto-cgraph.c (output_profile_summary): Do not stream GCOV
	histogram.
	(input_profile_summary): Do not read it.
	(merge_profile_summaries): And do not merge it.
	(input_symtab): Do not call removed function.
	* modulo-sched.c (sms_schedule): Do not print sum_max.
	* params.def (HOT_BB_COUNT_FRACTION): Reincarnate param that was
	removed when histogram method was invented.
	(HOT_BB_COUNT_WS_PERMILLE): Mention that it's used only in LTO
	mode.
	* postreload-gcse.c (eliminate_partially_redundant_load): Fix
	GCOV coding style.
	* predict.c (get_hot_bb_threshold): Use HOT_BB_COUNT_FRACTION
	and dump selected value.
	* profile.c (add_working_set): Remove.
	(get_working_sets): Likewise.
	(find_working_set): Likewise.
	(get_exec_counts): Do not work with working sets.
	(read_profile_edge_counts): Do not inform as sum_max is removed.
	(compute_branch_probabilities): Likewise.
	(compute_value_histograms): Remove argument for call of
	get_coverage_counts.
	* profile.h: Do not make gcov_summary const.

2018-09-21  Monk Chiang  <sh.chiang04@gmail.com>

	* config.gcc (nds32*-*-*): Set TARGET_DEFAULT_TLSDESC_TRAMPOLINE=0.

2018-09-21  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/86990
	* gimple-ssa-store-merging.c (imm_store_chain_info:coalesce_immediate):
	Check that the entire merged store group is made of constants only for
	overlapping stores.

2018-09-20  Allan Sandfeld Jensen  <allan.jensen@qt.io>

	* gcc.c (LINK_COMMAND_SPEC): Handle -r like -nostdlib.
	(VTABLE_VERIFICATION_SPEC): Likewise.
	(SANITIZER_EARLY_SPEC): Likewise.
	(SANITIZER_SPEC): Likewise.
	* config/darwin.h (LINK_COMMAND_SPEC): Likewise.
	* doc/invoke.texi (Link Options): Document -r.

2018-09-20  Richard Biener <rguenther@suse.de>

	PR middle-end/87054
	* gimplify.c (gimplify_expr): Retain alignment of
	addressable lvalue in dereference.

2018-09-20  Alexandre Oliva <aoliva@redhat.com>

	PR bootstrap/87013
	* configure.ac: Check for .loc is_stmt support.
	* configure, config.in: Rebuilt.
	* dwarf2out.c (dwarf2out_source_line): Skip is_stmt
	if not supported.

2018-09-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.opt (misel=no, misel=yes): Delete.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Delete -misel=yes and
	-misel=no.

2018-09-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-opts.h (enum rs6000_vector): Delete
	VECTOR_OTHER.
	* config/rs6000/rs6000.c (rs6000_debug_vector_unit): Delete
	case VECTOR_OTHER.

2018-09-20  Marek Polacek  <polacek@redhat.com>

	* doc/invoke.texi: Add -Wno-init-list-lifetime to C++ Language Options.

2018-09-20  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/87288
	* tree-vect-loop.c (vect_analyze_loop_2): Take PEELING_FOR_GAPS
	into account when determining PEELING_FOR_NITERS.

2018-09-20  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86877
	* tree-vect-loop.c (vect_analyze_loop_2): Call
	vect_verify_datarefs_alignment.

2018-09-19  Marek Polacek  <polacek@redhat.com>

	* doc/invoke.texi: Document -Wclass-conversion.

2018-09-19  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_adjust_priority): Delete.
	(TARGET_SCHED_ADJUST_PRIORITY): Delete define.

	* config/pa/pa.md (atomic_storeqi): Restore deleted expander.
	(atomic_storehi): Likewise.
	(atomic_storesi): Likewise.
	(atomic_loaddi): Restore compare and swap exchange loop code.

2018-09-19  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/86902
	* combine.c (try_combine): When changing the CC mode used, don't change
	an unrelated mode in other_insn to that new CC mode.

2018-09-19  David Malcolm  <dmalcolm@redhat.com>

	* tree-data-ref.c (runtime_alias_check_p): Use formatted printing
	with %T in place of calls to dump_generic_expr.
	(prune_runtime_alias_test_list): Likewise.
	(create_runtime_alias_checks): Likewise.
	* tree-vect-data-refs.c (vect_check_nonzero_value): Likewise.
	(vect_analyze_data_ref_dependence): Likewise.
	(vect_slp_analyze_data_ref_dependence): Likewise.
	(vect_record_base_alignment): Likewise.  Use %G in place of call
	to dump_gimple_stmt.
	(vect_compute_data_ref_alignment): Likewise.
	(verify_data_ref_alignment): Likewise.
	(vect_find_same_alignment_drs): Likewise.
	(vect_analyze_group_access_1): Likewise.
	(vect_analyze_data_ref_accesses): Likewise.
	(dependence_distance_ge_vf): Likewise.
	(dump_lower_bound): Likewise.
	(vect_prune_runtime_alias_test_list): Likewise.
	(vect_find_stmt_data_reference): Likewise.
	(vect_analyze_data_refs): Likewise.
	(vect_create_addr_base_for_vector_ref): Likewise.
	(vect_create_data_ref_ptr): Likewise.
	* tree-vect-loop-manip.c (vect_set_loop_condition): Likewise.
	(vect_can_advance_ivs_p): Likewise.
	(vect_update_ivs_after_vectorizer): Likewise.
	(vect_gen_prolog_loop_niters): Likewise.
	(vect_prepare_for_masked_peels): Likewise.
	* tree-vect-loop.c (vect_determine_vf_for_stmt): Likewise.
	(vect_determine_vectorization_factor): Likewise.
	(vect_is_simple_iv_evolution): Likewise.
	(vect_analyze_scalar_cycles_1): Likewise.
	(vect_analyze_loop_operations): Likewise.
	(report_vect_op): Likewise.
	(vect_is_slp_reduction): Likewise.
	(check_reduction_path): Likewise.
	(vect_is_simple_reduction): Likewise.
	(vect_create_epilog_for_reduction): Likewise.
	(vect_finalize_reduction:): Likewise.
	(vectorizable_induction): Likewise.
	(vect_transform_loop_stmt): Likewise.
	(vect_transform_loop): Likewise.
	(optimize_mask_stores): Likewise.
	* tree-vect-patterns.c (vect_pattern_detected): Likewise.
	(vect_split_statement): Likewise.
	(vect_recog_over_widening_pattern): Likewise.
	(vect_recog_average_pattern): Likewise.
	(vect_determine_min_output_precision_1): Likewise.
	(vect_determine_precisions_from_range): Likewise.
	(vect_determine_precisions_from_users): Likewise.
	(vect_mark_pattern_stmts): Likewise.
	(vect_pattern_recog_1): Likewise.
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Likewise.
	(vect_record_max_nunits): Likewise.
	(vect_build_slp_tree_1): Likewise.
	(vect_build_slp_tree_2): Likewise.
	(vect_print_slp_tree): Likewise.
	(vect_analyze_slp_instance): Likewise.
	(vect_detect_hybrid_slp_stmts): Likewise.
	(vect_detect_hybrid_slp_1): Likewise.
	(vect_slp_analyze_operations): Likewise.
	(vect_slp_analyze_bb_1): Likewise.
	(vect_transform_slp_perm_load): Likewise.
	(vect_schedule_slp_instance): Likewise.
	* tree-vect-stmts.c (vect_mark_relevant): Likewise.
	(vect_mark_stmts_to_be_vectorized): Likewise.
	(vect_init_vector_1): Likewise.
	(vect_get_vec_def_for_operand): Likewise.
	(vect_finish_stmt_generation_1): Likewise.
	(vect_check_load_store_mask): Likewise.
	(vectorizable_call): Likewise.
	(vectorizable_conversion): Likewise.
	(vectorizable_operation): Likewise.
	(vectorizable_load): Likewise.
	(vect_analyze_stmt): Likewise.
	(vect_is_simple_use): Likewise.
	(vect_get_vector_types_for_stmt): Likewise.
	(vect_get_mask_type_for_stmt): Likewise.
	* tree-vectorizer.c (increase_alignment): Likewise.

2018-09-19  Andrew Stubbs  <ams@codesourcery.com>

	* doc/rtl.texi: Adjust vec_select description.
	* simplify-rtx.c (simplify_binary_operation_1): Allow VEC_SELECT to use
	non-constant selectors.

2018-09-19  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-protos.h
	(aarch64_offset_9bit_signed_unscaled_p): New declaration.
	* config/aarch64/aarch64.md (arches): New "rcpc8_4" attribute value.
	(arch_enabled): Add check for "rcpc8_4" attribute value of "arch".
	* config/aarch64/aarch64.h (AARCH64_FL_RCPC8_4): New bitfield.
	(AARCH64_FL_FOR_ARCH8_4): Include AARCH64_FL_RCPC8_4.
	(AARCH64_FL_PROFILE): Move index so flags are ordered.
	(AARCH64_ISA_RCPC8_4): New flag.
	* config/aarch64/aarch64.c (offset_9bit_signed_unscaled_p): Renamed
	to aarch64_offset_9bit_signed_unscaled_p.
	* config/aarch64/atomics.md (atomic_store<mode>): Allow offset
	and use stlur.
	* config/aarch64/constraints.md (Ust): New constraint.
	* config/aarch64/predicates.md.
	(aarch64_9bit_offset_memory_operand): New predicate.
	(aarch64_rcpc_memory_operand): New predicate.

2018-09-19  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/87361
	* rtlanal.c (nonzero_bits1): Revert accidental change.

2018-09-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87349
	PR tree-optimization/87342
	* tree-ssa-sccvn.c (do_rpo_vn): Iterate max_rpo computation.

2018-09-18  Marek Polacek  <polacek@redhat.com>

	P1064R0 - Allowing Virtual Function Calls in Constant Expressions
	* gimple-fold.c (gimple_get_virt_method_for_vtable): Adjust assert.

2018-09-18  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md: Remove old "Cygnus sibcall" comment.

2018-09-18  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/86882
	* rtlanal.c (reg_overlap_mentioned_p): Handle CLOBBER.

2018-09-18  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*<code>extend<mode>xf2): Macroize insn from
	*<code>extendsfxf2 and *<code>extenddfxf2 using MODEF mode iterator.

2018-09-18  Jonathan Wakely  <jwakely@redhat.com>

	PR other/87353
	* doc/invoke.texi (Link Options): Fix formatting and grammar.

2018-09-18  Richard Biener  <rguenther@suse.de>

	PR middle-end/63155
	* tree-ssa-coalesce.c (tree_int_map_hasher): Remove.
	(compute_samebase_partition_bases): Likewise.
	(coalesce_ssa_name): Always use compute_optimized_partition_bases.
	(gimple_can_coalesce_p): Simplify.

2018-09-18  Hans-Peter Nilsson  <hp@bitrange.com>

	Handle a library implementation of ffs calling __builtin_ffs.
	* config/mmix/mmix.c (TARGET_INIT_LIBFUNCS): Override with...
	(mmix_init_libfuncs): New function: make __builtin_ffs expand
	to __ffsdi2.

2018-09-17  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic-show-locus.c (class layout_range): Add field
	"m_original_idx".
	(layout_range::layout_range): Add "original_idx" param and use it
	to initialize new field.
	(make_range): Use 0 for original_idx.
	(layout::layout): Pass in index to calls to
	maybe_add_location_range.
	(layout::maybe_add_location_range): Add param "original_idx" and
	pass it on to layout_range.
	(layout::print_any_labels): Pass on range->m_original_idx to
	get_text call.
	(gcc_rich_location::add_location_if_nearby): Use 0 for
	original_idx.
	* gcc-rich-location.h (text_range_label::get_text): Update for new
	param.
	(range_label_for_type_mismatch::get_text): Likewise.

2018-09-17  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (ix86_emit_i387_log1p): Emit fldln2 earlier.

2018-09-17  David Malcolm  <dmalcolm@redhat.com>

	* gimple-ssa-sprintf.c (fmtwarn): Update for introduction of
	format_string_diagnostic_t.
	(fmtwarn_n): Likewise.
	* substring-locations.c
	(format_string_diagnostic_t::format_string_diagnostic_t) New ctor.
	(format_warning_n_va): Convert to...
	(format_string_diagnostic_t::emit_warning_n_va): ...this.
	(format_warning_va): Convert to...
	(format_string_diagnostic_t::emit_warning_va): ...this.
	(format_warning_at_substring): Convert to...
	(format_string_diagnostic_t::emit_warning): ...this.
	(format_warning_at_substring_n): Convert to...
	(format_string_diagnostic_t::emit_warning_n): ...this.
	* substring-locations.h (class format_string_diagnostic_t): New
	class.
	(format_warning_va): Convert to
	format_string_diagnostic_t::emit_warning_va.
	(format_warning_n_va): Convert to
	format_string_diagnostic_t::emit_warning_n_va.
	(format_warning_at_substring): Convert to
	format_string_diagnostic_t::emit_warning.
	(format_warning_at_substring_n): Convert to
	format_string_diagnostic_t::emit_warning_n.

2018-09-17  Cesar Philippidis  <cesar@codesourcery.com>
	    Bernd Schmidt <bernds_cb1@t-online.de>

	* config/nvptx/nvptx.md (atomic_fetch_<logic><mode>): Enable with
	SImode args.

2018-09-17  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (truncxf<mode>2_i387_noop_unspec): Change
	operand 0 predicate to nonimmediate operand.
	(rint<mode>2_frndint): Remove insn pattern.
	(rint<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate rintxf2 insn.
	(frndintxf2_<rounding>): Rename from frndint<mode>2_<rounding>.
	Do not use X87MODEF mode macro.
	(frndintxf2_<rounding>_i387): Rename from
	frndint<mode>2_<rounding>_i387.  Do not use X87MODEF mode macro.
	(<rounding_insn><mode>2): For non-SSE modes, extend operand 1
	to XFmode and generate significandxf3 insn.

2018-09-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87328
	* tree-ssa-sccvn.c (process_bb): Remove assertion about not
	visiting unexecutable backedges when not iterating.
	(do_rpo_vn): Mark all edges not executable even when not
	iterating.

2018-09-17  Martin Jambor  <mjambor@suse.cz>

	PR c/63886
	* doc/invoke.texi (Warning Options): Likewise.

2018-09-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87301
	* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_cleanup): Properly
	clean EH info from leftover copy assignments.

2018-09-17  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/85871
	* gcov.c (output_intermediate_file): Fix out of bounds
	access.

2018-09-17  Vineet Gupta  <vgupta@synopsys.com>

	* config/arc/arc.c: Object attributes for core4 not reflected
	correctly.
	* config/arc/arc.h: Don't restrict DBNZ to core3 (core4 includes
	core3).

2018-09-17  Alexey Brodkin  <abrodkin@synopsys.com>

	* config/arc/linux.h (LINK_EH_SPEC): Add missing space.

2018-09-17  Martin Liska  <mliska@suse.cz>

	* doc/gcov.texi: Document new option --use-hotness-colors.
	* gcov.c (struct source_info): Declare new field.
	(source_info::source_info): Set default for maximum_count.
	(print_usage): Add new -q option.
	(process_args): Process it.
	(accumulate_line_info): Save src->maximum_count.
	(output_line_beginning): Make color line number if
	flag_use_hotness_colors is set.
	(output_line_details): Pass default argument value.
	(output_lines): Pass src->maximum_count.

2018-09-17  Martin Liska  <mliska@suse.cz>

	* common/config/i386/i386-common.c (ix86_get_valid_option_values):
	Use processor_names table.
	* config/i386/i386.c (ix86_default_align): Use
	processor_cost_table for alignment values.
	(ix86_option_override_internal): Use processor_names.
	(ix86_function_specific_print): Likewise.
	* config/i386/i386.h (struct processor_costs):
	Add alignment values.
	(struct ptt): Remove and replace with const char *.
	* config/i386/x86-tune-costs.h (struct processor_costs):
	Declare default alignments for all costs.

2018-09-17  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (extract_range_from_unary_expr): Do not special case
	symbolics or VR_VARYING ranges for ABS_EXPR.
	* wide-int-range.cc (wide_int_range_abs): Return positive numbers
	when range will wrap.

2018-09-15  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/86864
	* cfgexpand.c (expand_gimple_basic_block): Be prepared for a BARRIER
	before and after a JUMP_TABLE_DATA.

2018-09-14  John David Anglin  <danglin@gcc.gnu.org>

	PR middle-end/87188
	* dojump.c (do_compare_and_jump): Canonicalize function pointers
	when one operand is a function pointer.  Use POINTER_TYPE_P and
	FUNC_OR_METHOD_TYPE_P.
	* expr.c (do_store_flag): Use POINTER_TYPE_P and FUNC_OR_METHOD_TYPE_P.
	* fold-const.c (build_range_check): Likewise.
	* match.pd (simple_comparison): Likewise.

2018-09-14  David Malcolm  <dmalcolm@redhat.com>

	PR c/82967
	* spellcheck.c (get_edit_distance_cutoff): New function.
	(selftest::test_edit_distance_unit_test_oneway): Rename to...
	(selftest::test_get_edit_distance_one_way): ...this.
	(selftest::test_get_edit_distance_unit): Rename to...
	(selftest::test_get_edit_distance_both_ways): ...this.
	(selftest::test_edit_distances): Move tests to this new function,
	and test some more pairs of strings.  Update for above renaming.
	(selftest::get_old_cutoff): New function.
	(selftest::test_get_edit_distance_cutoff): New function.
	(selftest::assert_suggested_for): New function.
	(ASSERT_SUGGESTED_FOR): New macro.
	(selftest::assert_not_suggested_for): New function.
	(ASSERT_NOT_SUGGESTED_FOR): New macro.
	(selftest::test_suggestions): New function.
	(selftest::spellcheck_c_tests): Move test_get_edit_distance_unit
	tests to selftest::test_edit_distances and call it.  Add calls to
	selftest::test_get_edit_distance_cutoff and
	selftest::test_suggestions.
	* spellcheck.h (get_edit_distance_cutoff): New function declaration.
	(best_match::consider): Replace hard-coded cutoff calculation with
	a call to...
	(best_match::get_cutoff): New declaration.
	(best_match::get_best_meaningful_candidate): Likewise.

2018-09-14  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* builtins.c (fold_builtin_strlen): Remove TODO comment.

2018-09-14  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	revert:
	2018-07-30  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* tree-ssa-forwprop.c (simplify_builtin_call): Don't create a not NUL
	terminated string literal.

2018-09-14  Martin Sebor  <msebor@redhat.com>

	* builtins.c (unterminated_array): Handle ARRAY_REF.
	(expand_builtin_stpcpy_1): Detect unterminated char arrays.
	* builtins.h (unterminated_array): Declare extern.
	* gimple-fold.c (gimple_fold_builtin_stpcpy): Detect unterminated
	arrays.
	(gimple_fold_builtin_sprintf): Propagate NO_WARNING to transformed
	calls.

2018-09-14  Martin Sebor  <msebor@redhat.com>
	    Jeff Law  <law@redhat.com>

	* builtins.c (unterminated_array): New.
	(expand_builtin_strcpy): Adjust.
	(expand_builtin_strcpy_args): Detect unterminated arrays.
	* gimple-fold.c (get_maxval_strlen): Add argument.  Detect
	unterminated arrays.
	* gimple-fold.h (get_maxval_strlen): Add argument.
	(gimple_fold_builtin_strcpy): Detec unterminated arrays.

	* gimple-fold.c (get_range_strlen): Add argument.
	(get_maxval_strlen): Adjust.
	* gimple-fold.h (get_range_strlen): Add argument.

2018-09-14  Wei Xiao  <wei3.xiao@intel.com>

	* config/i386/movdirintrin.h: Fix copyright year.

2018-09-14  Uros Bizjak  <ubizjak@gmail.com>

	* reg-stack.c: Include regs.h.
	(replace_reg): Assert that mode is MODE_FLOAT or MODE_COMPLEX_FLOAT.
	(emit_pop_insn): Default pop insn mode to the reg_raw_mode of
	FIRST_STACK_REG, not DFmode.
	(emit_swap_insn): Default swap insn mode to the reg_raw_mode of
	FIRST_STACK_REG, not XFmode.  Explicitly construct swap RTX.
	(change stack): Default register mode to the reg_raw_mode of
	FIRST_STACK_REG, not DFmode.
	* config/i386/i386.md (*swap<mode>): Remove insn pattern.
	(*swapxf): Rename from swapxf.

2018-09-14  Carl Love  <cel@us.ibm.com>

	* config/rs6000/emmintrin.h: Add _MM_SHUFFLE2.
	* config/rs6000/xmmintrin.h: Add _MM_SHUFFLE.

2018-09-14  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/87224
	* config/rs6000/rs6000.md (*mov<mode>_hardfloat64): Add Z to the Y
	alternatives.

2018-09-14  Sam Tebbs  <sam.tebbs@arm.com>

	PR target/85628
	* config/aarch64/aarch64.md (*aarch64_bfxilsi_uxtw): Define.

2018-09-14  Jason Merrill  <jason@redhat.com>

	Fix --enable-gather-detailed-mem-stats.
	* hash-table.c (hash_table_usage): Change from variable to function.
	* hash-table.h: Adjust.
	* Makefile.in: Add missing dependencies on hash-table.h.

2018-09-14  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR tree-optimization/87259
	PR lto/87283
	(pass_cse_reciprocals::execute): Run optimize_recip_sqrt after
	execute_cse_reciprocals_1 has tried transforming.

2018-09-14  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (extract_range_from_binary_expr_1): Normalize
	VR_VARYING for PLUS/MINUS_EXPR.

2018-09-14  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390-passes.def (INSERT_PASS_BEFORE): Improve
	formatting.

2018-09-14  Richard Biener  <rguenther@suse.de>

	PR middle-end/63155
	* tree-ssa-coalesce.c (ssa_conflicts_merge): Remove conflict
	bits for the merged partition.

2018-09-13  Martin Sebor  <msebor@redhat.com>
	    Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* builtins.h (c_srlen): Add argument.
	* builtins.c (warn_string_no_nul): New function.
	(c_strlen): Add argument and use it.  Update recursive calls.
	Pass DECL argument to string_constant to get info on non
	terminated strings.  Update *NONSTR as needed.
	(fold_builtin_strlen): Add argument to calls to c_strlen.
	Warn for unterminated arrays.
	(warn_string_no_null): Add prototype.
	* expr.c (string_constant): Update arguments.  Update recursive
	calls appropriately.  Detect missing NUL terminator and outermost
	declaration its missing in.
	Improve checks for arrays with nonzero lower bound or elements
	that are not a single byte.  Simplify offset computation.
	Simplify checks for non-NUL terminated strings.
	* gimple-fold.c (get_range_strlen): Add argument to c_strlen call.
	* gimple-ssa-sprintf.c (get_string_length): Remove unnecessary code.

2018-09-13  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* builtins.c (c_strlen): Handle not zero terminated STRING_CSTs
	correctly.
	* fold-const.c (c_getstr): Fix function comment.  Remove unused third
	argument.  Fix range checks.
	* fold-const.h (c_getstr): Adjust protoype.
	* gimple-fold.c (gimple_fold_builtin_memory_op): Avoid folding when
	string is constant but contains no NUL byte.

	* expr.c (string_constant): Adjust function comment.
	Remove bogus check for zero termination.

	* fold-const.c (c_getstr): Clamp STRING_LENGTH to STRING_SIZE.

	* varasm.c (compare_constant): Compare type size of STRING_CSTs.
	(get_constant_size): Don't make STRING_CSTs larger than they are.
	(check_string_literal): New check function for STRING_CSTs.
	(output_constant): Use it.

2018-09-13  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/86812
	* config/visium/visium.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define.

2018-09-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87263
	* tree-ssa-sccvn.c (visit_phi): Revert some earlier changes.
	(struct unwind_state): Add max_rpo field.
	(do_rpo_vn): Allow up-to-date loop state to be used when not iterating.
	Compute max_rpo, the max RPO number a block can be backwards reached
	from.  Re-write non-iterating mode to a RPO ordered worklist approach,
	separating it from the iterating mode.

2018-09-13  Vlad Lazar  <vlad.lazar@arm.com>

	* haifa-sched.c (rank_for_schedule): Schedule by INSN_COST.
	(rfs_decision): New scheduling decision.

2018-09-13  Richard Biener  <rguenther@suse.de>

	PR bootstrap/87134
	* tree-ssa-sccvn.c (vn_nary_op_insert_into): Fix assert.
	(vn_nary_op_insert_pieces_predicated): Do not write useless
	valid_dominated_by_p entry outside of the allocated storage.

2018-09-13  Omar Sandoval  <osandov@osandov.com>
	    Tom de Vries  <tdevries@suse.de>

	PR debug/86985
	* dwarf2out.c (is_c): New function.
	(add_subscript_info): Add DW_AT_count of 0 for C zero-length arrays.

2018-09-13  Sam Tebbs  <sam.tebbs@arm.com>

	PR target/85628
	* config/aarch64/aarch64.md (*aarch64_bfxil):
	Define.
	* config/aarch64/constraints.md (Ulc): Define.
	* config/aarch64/aarch64-protos.h (aarch64_high_bits_all_ones_p):
	Define.
	* config/aarch64/aarch64.c (aarch64_high_bits_all_ones_p):
	New function.

2018-09-13  Vlad Lazar  <vlad.lazar@arm.com>

	* config/aarch64/aarch64.h (TARGET_COMPUTE_FRAME_LAYOUT): Define.
	* config/aarch64/aarch64.c (aarch64_expand_prologue): Remove
	aarch64_layout_frame call.
	(aarch64_expand_epilogue): Likewise.
	(aarch64_initial_elimination_offset): Likewise.
	(aarch64_get_separate_components): Likewise.
	(aarch64_use_return_insn_p): Likewise.
	(aarch64_layout_frame): Remove unneeded check.

2018-09-13  Jakub Jelinek  <jakub@redhat.com>

	* configure.ac: Only append
	" : (reconfigured) $TOPLEVEL_CONFIGURE_ARGUMENTS" to
	gcc_config_arguments if it was never reconfigured or last reconfigure
	was with different arguments.
	* configure: Regenerated.

2018-09-13  Jakub Jelinek  <jakub@redhat.com>
	    Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR middle-end/87290
	* expr.c (maybe_optimize_pow2p_mod_cmp): New function.
	(maybe_optimize_mod_cmp): Use it if integer_pow2p treeop1.

2018-09-13  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/87287
	* fold-const.c (fold_binary_loc) <case EQ_EXPR>: Move signed modulo
	X % C == 0 to X % (unsigned) C == 0 optimization to ...
	* match.pd (X % C == 0): ... here.  New optimization.

2018-09-12  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/82853
	* expr.h (maybe_optimize_mod_cmp): Declare.
	* expr.c (mod_inv): New function.
	(maybe_optimize_mod_cmp): New function.
	(do_store_flag): Use it.
	* cfgexpand.c (expand_gimple_cond): Likewise.

2018-09-09  Cesar Philippidis  <cesar@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>

	PR middle-end/86336
	* gimplify.c (gimplify_scan_omp_clauses): Set
	target_firstprivatize_array_bases in OpenACC parallel and kernels
	region contexts.  Remove GOMP_MAP_FIRSTPRIVATE_REFERENCE clauses from
	OpenACC data regions.

2018-09-12  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (sqrt_extend<mode>xf3_i387): Remove.
	(sqrt<mode>2): Extend operand 1 to XFmode and generate sqrtxf3 insn.

2018-09-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87280
	* tree-ssa-sccvn.c (process_bb): Handle the case of executable
	edge but unreachable target.
	(do_rpo_vn): For conservatively handling a PHI only mark
	the backedge executable but not the block reachable.

2018-09-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87266
	* tree-ssa-sccvn.c (do_rpo_vn): Always iterate to not yet
	visited blocks.

2018-09-12  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md (PFPO_RND_MODE_DFP, PFPO_RND_MODE_BFP): New
	constants.
	("trunc<BFP:mode><DFP_ALL:mode>2")
	("trunc<DFP_ALL:mode><BFP:mode>2")
	("extend<BFP:mode><DFP_ALL:mode>2")
	("extend<DFP_ALL:mode><BFP:mode>2"): Set proper rounding mode
	according to the target operand type.

2018-09-12  Jakub Jelinek  <jakub@redhat.com>
	    Andreas Krebbel  <krebbel@linux.ibm.com>

	PR tree-optimization/86844
	* gimple-ssa-store-merging.c
	(imm_store_chain_info::coalesce_immediate): For overlapping stores, if
	there are any overlapping stores in between them, make sure they are
	also coalesced or we give up completely.

2018-09-12  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/87248
	* fold-const.c (fold_ternary_loc) <case COND_EXPR>: Verify also that
	BIT_AND_EXPR's second operand is a power of two.  Formatting fix.

2018-09-12  Tom de Vries  <tdevries@suse.de>

	* common.opt (gdescribe-dies): Add option.
	* dwarf2out.c (add_name_and_src_coords_attributes): Add description
	attribute for artifical and nameless decls.
	(dwarf2out_register_external_die): Add description attribute to
	external reference die.
	(add_desc_attribute): New functions.
	(gen_subprogram_die): Add description attribute to
	DW_TAG_call_site_parameter.
	* tree-pretty-print.c (print_generic_expr_to_str): New function.
	* tree-pretty-print.h (print_generic_expr_to_str): Declare.
	* doc/invoke.texi (@item Debugging Options): Add -gdescribe-dies and
	-gno-describe-dies.
	(@item -gdescribe-dies): Add.

2018-09-12  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (vrp_shift_undefined_p): Remove.
	(extract_range_from_binary_expr_1: Call
	wide_int_range_shift_undefined_p instead of vrp_shift_undefined_p.
	* wide-int-range.h (wide_int_range_shift_undefined_p): Do not
	depend on sign.

2018-09-12  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-ssa-warn-alloca.c
	(alloca_type_and_limit::alloca_type_and_limit): Initialize limit
	field for ALLOCA_BOUND_*_LARGE.

2018-09-11  Nathan Sidwell  <nathan@acm.org>

	* gcc.c (load_specs, execute, run_attempt): Use %qs not '%s'.

2018-09-11  Uros Bizjak  <ubizjak@gmail.com>

	* reg-stack.c (subst_asm_stack_regs): Call replace_reg also
	for clobbers.  Remove obsolete comment.

2018-09-11  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (define_attr "type"): Remove mpxmov, mpxmk,
	mpxchk, mpxld and mpxst types.
	(define_attr length_immediate): Remove all processing of mpx types.
	(define_attr prefix_0f): Ditto.
	(define_attr memory): Ditto.

2018-09-11  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (fyl2x_extend<mode>xf3_i387): Remove.
	(log<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate logxf3 insn.
	(log10<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate log10xf3 insn.
	(log2<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate log2xf3 insn.
	(fyl2xp1_extend<mode>xf3_i387): Remove.
	(log1p<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate log1pxf3 insn.
	(fxtract_extend<mode>xf3_i387): Remove.
	(logb<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate logbxf3 insn.
	(ilogb<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate fxtractxf3_i387 insn.
	(significand<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate significandxf3 insn.

2018-09-11  Nathan Sidwell  <nathan@acm.org>

	* gcc.c (perror_with_name, pfatal_with_name): Delete.
	(load_specs): Use fatal_error.
	(DELETE_IF_ORDINARY, process_command): Use error.
	(execute, run_attempt): Use fatal_error.

2018-09-11  Andrew Stubbs  <ams@codesourcery.com>

	* diagnostic-core.h (sorry_at): New prototype.
	* diagnostic.c (sorry_at): New function.

2018-09-11  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (extract_range_from_binary_expr_1): Treat all divisions
	by zero as VR_UNDEFINED.

2018-09-10  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (<sincos>xf2): Rename from *<sincos>xf2_i387.
	(*<sincos>_extend<mode>xf2_i387): Remove insn pattern.
	(<sincos>mode2): New expander.
	(sincos_extend<mode>xf3_i387): Remove insn pattern.
	(sincos -> sin, cos splitters): Remove splitter patterns.
	(sincos<mode>3): Change operand 2 predicate to general_operand.
	Extend operand 2 to XFmode and generate sincosxf3 insn.
	(fptanxf4_i387): Change mode of operands 0 and 3 to SFmode.
	Change operand 3 predicate to const1_operand.
	(fptan_extend<mode>xf4_i387): Remove insn pattern.
	(tanxf2): Update operands in the call to fptanxf4_i387.
	(tan<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate tanxf3 insn.
	(atan2xf3): Rename from *fpatanxf3_i387.
	(fpatan_extend<mode>xf3_i387): Remove insn pattern.
	(atan2xf3): Remove expander.
	(atan2<mode<3):  Change operand 1 and 2 predicates to general_operand.
	Extend operands 1 and 2 to XFmode and generate atan2xf3 insn.
	(atan<mode>2): Change operand 1 predicate to general_operand.
	Extend operand 1 to XFmode and generate atanxf3 insn.

2018-09-10  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (x87/SSE constant load splitter): Use
	memory_operand instead of nonimmediate_operand for input operand
	predicate.

2018-09-09  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (float partial SSE register stall splitter): Move
	splitter near its instruction pattern.
	(float_extend partial SSE register stall splitter): Ditto.
	(float_truncate partial SSE register stall splitter): Ditto.

2018-09-09  Hans-Peter Nilsson  <hp@bitrange.com>

	PR target/86794
	* config/mmix/mmix.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Redefine
	to speculation_safe_value_not_needed.

	PR target/85666
	* config/mmix/mmix.c (mmix_assemble_integer): Handle byte-size
	non-CONST_INT rtx:es using assemble_integer_with_op ".byte".
	(MMIX_CFUN_NEEDS_SAVED_EH_RETURN_ADDRESS): Don't call
	leaf_function_p, instead use has_hard_reg_initial_val.

2018-09-09  Nathan Sidwell  <nathan@acm.org>

	* gcc.h (pfatal_with_name): Don't declare here.
	* gcc.c (pfatal_with_name): Make static.

2018-09-09  Xianmiao Qu  <xianmiao_qu@c-sky.com>

	* config/csky/csky.md (*cskyv2_adddi3, *cskyv2_subdi3): Add
	earlyclobber.

2018-09-08  John David Anglin  <danglin@gcc.gnu.org>

	PR rtl-optimization/85458
	* sel-sched.c (sel_target_adjust_priority): Allow backend adjust
	priority hook to reduce the priority of EXPR.

2018-09-07  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (float<SWI48x:mode><MODEF:mode>2) Enable
	DImode for x87 on 32bit targets.  Conditionally disable x87 modes
	with X87_ENABLE_FLOAT.  Remove preparation code.
	(*float<SWI48:mode><MODEF:mode>2): Rename from
	*float<SWI48:mode><MODEF:mode>2_mixed.  Handle x87, SSE and mixed
	math using "enabled" attribute.
	(*floatdi<MODEF:mode>2_i387): Rename from
	*float<SWI48x:mode><MODEF:mode>2_i387.  Handle only DImode and
	enable for 32bit targets only.
	(floatdi<X87MODEF:mode>2_i387_with_xmm pre-reload splitter): New
	splitter.
	(floatdi<X87MODEF:mode>2_i387_with_xmm): Use register_operand
	as operand 1 predicate.  Rewrite as define_insn_and_split.
	(floatdi<X87MODEF:mode>2_i387_with_xmm memory input splitter): Remove.

2018-09-06  Uros Bizjak  <ubizjak@gmail.com>

	* reg-stack.c (get_true_reg) <case FLOAT_TRUNCATE>: Reorder
	to fallthru to FLOAT case.

2018-09-06  Will Schmidt  <will_schmidt@vnet.ibm.com>

	PR target/86731
	* config/rs6000/rs6000.c (rs6000_gimple_fold_builtin): Update logic
	around folding of vec_sl to handle out of range shift values.

2018-09-06  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (fix_trunc<mode>_fisttp_i387_1): Remove.
	Update callers to gen_fix_trunc<mode>_i387_fisttp
	(fix_trunc<mode>_i387_fisttp): Change operand 0 predicate to
	nonimmediate_operand.
	(fix_trunc<mode>_i387_fisttp_with_temp): Remove insn pattern
	and corresponding splitters.
	(*fix_trunc<mode>_i387_1): Always expand with fix_trunc<mode>_i387.
	(fix_truncdi_i387): Change operand 0 predicate to nonimmediate_operand.
	(fix_truncdi_i387_with_temp): Remove insn pattern
	and corresponding splitters.
	(fix_trunc<mode>_i387): Change operand 0 predicate to
	nonimmediate_operand.
	(fix_trunc<mode>_i387_with_temp): Remove insn pattern
	and corresponding splitters.
	(*fistdi2_1): Remove.
	(fistdi2): Ditto.
	(fistdi2_with_temp): Remove insn pattern and corresponding splitters.
	(lrintxfdi2): Remove expander.  Reimplement as define_insn.
	(*fist<mode>2_1): Remove.
	(fist<mode>2): Ditto.
	(fist<mode>2_with_temp): Remove insn pattern and corresponding
	splitters.
	(lrintxf<mode>2): Remove expander.  Reimplement as define_insn.
	(*fist<mode>2_<rounding>_1): Always expand with fist<mode>2_<rounding>.
	(fistdi2_<rounding>): Change operand 0 predicate to
	nonimmediate_operand.
	(fistdi2_<rounding>_with_temp): Remove insn pattern
	and corresponding splitters.
	(fist<mode>2_<rounding>): Change operand 0 predicate to
	nonimmediate_operand.
	(fist<mode>2_<rounding>_with_temp): Remove insn pattern
	and corresponding splitters.

	(*fixuns_trunc<mode>si2_avx512f_zext): Depend on TARGET_SSE_MATH.

2018-09-06  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* varasm.c (output_constructor_regular_field): Check TYPE_SIZE_UNIT of
	the init value.

2018-09-06  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_gimple_fold_builtin): Add support for
	early gimple folding of vec_splat().
	* tree-vect-generic.c: Remove static from tree_vec_extract() definition.
	* gimple-fold.h: Add an extern define for tree_vec_extract().

2018-09-06  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000.c (fold_mergehl_helper): Add types_compatible_p
	wrappers around TREE_TYPE comparisons.

2018-09-06  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/80080
	* config/s390/predicates.md: Add nonsym_memory_operand.
	* config/s390/s390.c (s390_legitimize_cs_operand): If operand
	contains a SYMBOL_REF, load it into an intermediate pseudo.
	(s390_emit_compare_and_swap): Legitimize operand.
	* config/s390/s390.md: Use the new nonsym_memory_operand
	with UNSPECV_CAS patterns.

2018-09-06  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/80080
	* config/s390/s390-passes.def: New file.
	* config/s390/s390-protos.h (class rtl_opt_pass): Add forward
	declaration.
	(make_pass_s390_early_mach): Add declaration.
	* config/s390/s390.c (make_pass_s390_early_mach):
	(s390_option_override): Remove dynamic registration.
	* config/s390/t-s390: Add s390-passes.def.

2018-09-06  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_decompose_constant_pool_ref):
	Remove UNSPEC_LTREL_BASE check.
	(annotate_constant_pool_refs): Likewise.
	(find_constant_pool_ref): Likewise.
	(find_ltrel_base): Removed.
	(replace_ltrel_base): Removed.
	(s390_mainpool_finish): Remove replace_ltrel_base call.
	(s390_chunkify_start): Remove pending LTREL_BASE logic.
	(s390_chunkify_finish): Remove replace_ltrel_base call.
	* config/s390/s390.md: Remove UNSPEC_LTREL_BASE.

2018-09-06  Hans-Peter Nilsson  <hp@axis.com>

	PR target/86779
	* config/cris/cris.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Redefine
	to speculation_safe_value_not_needed.

2018-09-05  Cesar Philippidis  <cesar@codesourcery.com>
	    Bernd Schmidt  <bernds_cb1@t-online.de>

	* config/nvptx/nvptx-opts.h: New file.
	* config/nvptx/nvptx.c (nvptx_file_start): Print the correct .target.
	* config/nvptx/nvptx.h: Include "nvptx-opts.h".
	(ASM_SPEC): Define.
	(TARGET_SM35): New macro.
	* config/nvptx/nvptx.md (atomic_fetch_<logic><mode>): Enable with the
	correct predicate.
	* config/nvptx/nvptx.opt (ptx_isa, sm_30, sm_35): New enum and its
	values.
	(misa=): New option.
	* doc/invoke.texi (Nvidia PTX Options): Document -misa.

2018-09-05  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (truncdfsf2): Remove expander.
	(truncdfsf2_with_temp): Ditto.
	(truncxf<mode>2): Ditto.
	(*truncdfsf_fast_mixed): Remove insn pattern.
	(*truncdfsf_fast_i387): Ditto.
	(*truncdfsf_mixed): Ditto.
	(*truncdfsf_i387): Ditto.
	(*truncdfsf2_i387_1): Ditto.
	(*truncxfsf2_mixed): Ditto.
	(*truncxfdf2_mixed): Ditto.
	(*truncxf<mode>2_i387_noop): Ditto. Update callers
	to call gen_truncxf<mode>2 instead.
	(*truncxf<mode>2_i387): Remove.
	(reg->reg splitters): Remove splitter pattern.
	(reg->mem splitters): Ditto.

	(truncdfsf2): New insn pattern.
	(truncxf<mode>2): Ditto.

2018-09-05  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* tree-ssa-math-opts.c (is_mult_by): New function.
	(is_square_of): Use the above.
	(optimize_recip_sqrt): New function.
	(pass_cse_reciprocals::execute): Use the above.

2018-09-05  Richard Biener  <rguenther@suse.de>

	PR bootstrap/87134
	* tree-ssa-sccvn.c (rpo_elim::eliminate_push_avail): Make sure
	to zero-init the emplaced vec.

2018-09-05  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/87205
	* tree-switch-conversion.c (pass_lower_switch::execute):
	Group cases for switch statements.

2018-09-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87217
	* tree-ssa-sccvn.c (vuse_valueize): New.
	(vn_reference_lookup_pieces): Use it.
	(vn_reference_lookup): Likewise.

2018-09-05  Nathan Sidwell  <nathan@acm.org>

	PR c++/87137
	* stor-layout.c (place_field): Scan forwards to check last
	bitfield when ms_bitfield_placement is in effect.

2018-09-05  Richard Biener  <rguenther@suse.de>

	PR bootstrap/87225
	* tree-vect-stmts.c (vectorizable_simd_clone_call): Fix bogus
	return.

2018-09-05  Siddhesh Poyarekar  <siddhesh@sourceware.org>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/falkor-tag-collision-avoidance.c: New file.
	* config.gcc (extra_objs): Build it.
	* config/aarch64/t-aarch64 (falkor-tag-collision-avoidance.o):
	Likewise.
	* config/aarch64/aarch64-passes.def
	(pass_tag_collision_avoidance): New pass.
	* config/aarch64/aarch64.c (qdf24xx_tunings): Add
	AARCH64_EXTRA_TUNE_RENAME_LOAD_REGS to tuning_flags.
	(aarch64_classify_address): Remove static qualifier.
	(aarch64_address_info, aarch64_address_type): Move to...
	* config/aarch64/aarch64-protos.h: ... here.
	(make_pass_tag_collision_avoidance): New function.
	* config/aarch64/aarch64-tuning-flags.def (rename_load_regs):
	New tuning flag.

2018-09-05  Martin Liska  <mliska@suse.cz>

	* doc/gcov.texi: Update documentation of humar
	readable mode.
	* gcov.c (format_count): Print one decimal place, it provides
	more fine number of situations like '1G' vs. '1.4G'.

2018-09-05  Martin Liska  <mliska@suse.cz>

	PR target/87164
	* config/rs6000/rs6000.opt: Mark the option as Deprecated.
	* optc-gen.awk: Allow 'Var' for Deprecated options in order
	to generate a MASK value.

2018-09-04  H.J. Lu  <hongjiu.lu@intel.com>

	PR debug/86593
	* dwarf2out.c (based_loc_descr): Allow hard frame pointer even
	if frame pointer isn't used.
	(compute_frame_pointer_to_fb_displacement): Likewise.

2018-09-04  Jakub Jelinek  <jakub@redhat.com>

	PR target/87198
	* common/config/i386/i386-common.c (OPTION_MASK_ISA_XSAVEOPT_SET,
	OPTION_MASK_ISA_XSAVES_SET, OPTION_MASK_ISA_XSAVEC_SET): Use
	OPTION_MASK_ISA_XSAVE_SET instead of OPTION_MASK_ISA_XSAVE.
	(OPTION_MASK_ISA_XSAVE_UNSET): Add OPTION_MASK_ISA_XSAVES_UNSET
	and OPTION_MASK_ISA_XSAVEC_UNSET.

2018-09-04  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/xtensa.c (xtensa_expand_atomic): Reorder AND and
	XOR operations in NAND case.

2018-09-04  Aldy Hernandez  <aldyh@redhat.com>

	* wide-int-range.cc (wide_int_range_convert): New.
	* wide-int-range.h (wide_int_range_convert): New.
	* tree-vrp.c (extract_range_from_unary_expr): Abstract wide int
	code into wide_int_range_convert.
	(extract_range_into_wide_ints): Do not munge anti range constants
	into the entire domain.  Just return the range back.

2018-09-04  Martin Liska  <mliska@suse.cz>

	* genmatch.c (output_line_directive): Add new argument
	fnargs.
	(dt_simplify::gen_1): Encapsulate dump within __builtin_expect.

2018-09-04  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (Option Summary): Add whitespace.

	* doc/invoke.texi (Option Summary): Add -Waligned-new.

2018-09-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87211
	* tree-ssa-sccvn.c (visit_phi): When value-numbering to a
	backedge value we're supposed to treat as VARYING also number
	the PHI to VARYING in case it got a different value-number already.

2018-09-04  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (vrp_can_optimize_bit_op): Remove.
	(extract_range_from_binary_expr_1): Do not call
	vrp_can_optimize_bit_op.
	* wide-int-range.cc (wide_int_range_can_optimize_bit_op): Make
	static.
	(wide_int_range_get_mask_and_bounds): New.
	(wide_int_range_optimize_bit_op): New.
	(wide_int_range_bit_ior): Call wide_int_range_optimize_bit_op.
	(wide_int_range_bit_and): Same.
	* wide-int-range.h (wide_int_range_can_optimize_bit_op): Remove.
	(wide_int_range_optimize_bit_op): New.
	(wide_int_range_get_mask_and_bounds): New.

2018-09-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87176
	* tree-ssa-sccvn.c (visit_phi): Remove redundant allsame
	variable.  When value-numbering a virtual PHI node make sure
	to not value-number to the backedge value.

2018-09-04  Jonathan Wakely  <jwakely@redhat.com>

	* doc/extend.texi (Long Long, Hex Floats): Document support for
	long long and hex floats in more recent versions of ISO C++.

2018-09-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87177
	* tree-ssa-sccvn.c (vuse_ssa_val): Revert previous change, keep
	cleanup.

2018-09-03  Alexander Monakov  <amonakov@ispras.ru>

	* bb-reorder.c (edge_order): Convert to C-qsort-style
	tri-state comparator.
	(reorder_basic_blocks_simple): Change std::stable_sort to
	gcc_stablesort.

2018-09-03  Alexander Monakov  <amonakov@ispras.ru>

	* tree-loop-distribution.c (offset_cmp): Convert to C-qsort-style
	tri-state comparator.
	(fuse_memset_builtins): Change std::stable_sort to gcc_stablesort.

2018-09-03  Alexander Monakov  <amonakov@ispras.ru>

	* sort.cc (struct sort_ctx): New field 'nlim'.  Use it...
	(mergesort): ... here as maximum count for using netsort.
	(gcc_qsort): Set nlim to 3 if stable sort is requested.
	(gcc_stablesort): New.
	* system.h (gcc_stablesort): Declare.

2018-09-03  Alexander Monakov  <amonakov@ispras.ru>

	* sort.cc (gcc_qsort) [CHECKING_P]: Call qsort_chk.
	* system.h (qsort): Always redirect to gcc_qsort.  Update comment.
	* vec.c (qsort_chk): Do not call gcc_qsort.  Update comment.

2018-09-03  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (*mov<mode>_hardfloat32): Remove %U from the
	lxsdx and stxsdx alternatives.
	(*mov<mode>_hardfloat64): Ditto.
	* config/rs6000/vsx.md (*vsx_extract_<mode>_store): Ditto.

2018-09-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87200
	* tree-ssa-sccvn.c (vn_nary_build_or_lookup_1): Valueize a
	simplify result.

2018-09-03  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/87201
	* tree-switch-conversion.c (switch_decision_tree::balance_case_nodes):
	Fix parenthesis in an expression.

2018-09-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87197
	* tree-ssa-sccvn.c (vn_nary_build_or_lookup_1): Mark the new def
	visited.  CSE the VN_INFO hashtable lookup.

	PR tree-optimization/87169
	* tree-ssa-sccvn.c (do_rpo_vn): When marking loops for not
	iterating make sure there's no extra backedges from irreducible
	regions feeding the header.  Mark the destination block
	executable.

2018-09-03  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* common/common-target.def: Add TARGET_GET_VALID_OPTION_VALUES.
	* common/common-targhooks.c (default_get_valid_option_values):
	New function.
	* common/common-targhooks.h (default_get_valid_option_values):
	Likewise.
	* common/config/i386/i386-common.c: Move processor_target_table
	from i386.c.
	(ix86_get_valid_option_values): New function.
	(TARGET_GET_VALID_OPTION_VALUES): New macro.
	* config/i386/i386.c (struct ptt): Move to i386-common.c.
	(PTA_*): Move all defined masks into i386-common.c.
	(ix86_function_specific_restore): Use new processor_cost_table.
	* config/i386/i386.h (struct ptt): Moved from i386.c.
	(struct pta): Likewise.
	* doc/tm.texi: Document new TARGET_GET_VALID_OPTION_VALUES.
	* doc/tm.texi.in: Likewise.
	* opt-suggestions.c (option_proposer::suggest_option):
	Pass prefix to build_option_suggestions.
	(option_proposer::get_completions): Likewise.
	(option_proposer::build_option_suggestions): Use the new target
	hook.
	* opts.c (struct option_help_tuple): New struct.
	(print_filtered_help): Use the new target hook.

2018-09-03  Martin Liska  <mliska@suse.cz>

	PR middle-end/59521
	* predict.c (set_even_probabilities): Add likely_edges
	argument and handle cases where we have precisely one
	likely edge.
	(combine_predictions_for_bb): Catch also likely_edges.
	(tree_predict_by_opcode): Handle gswitch statements.
	* tree-cfg.h (find_case_label_for_value): New declaration.
	(find_taken_edge_switch_expr): Likewise.
	* tree-switch-conversion.c (switch_decision_tree::balance_case_nodes):
	Find pivot in decision tree based on probabily, not by number of
	nodes.

2018-09-02  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/standards.texi (Standards): Update Objective-C reference.

2018-09-01  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi (Prerequisites): Update link for MPC.

2018-09-01  Michael Matz  <matz@suse.de>

	PR tree-optimization/87074
	* gimple-loop-jam.c (unroll_jam_possible_p): Check loop exit
	PHIs for outer-loop uses.

2018-09-01  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/generic.texi (OpenMP): Adjust link to openmp.org.
	* doc/invoke.texi (C Dialect Options): Ditto.

2018-09-01  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi (Prerequisites): Adjust link mpfr.org.

2018-08-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87168
	* tree-ssa-sccvn.c (SSA_VAL): Add visited output parameter.
	(rpo_elim::eliminate_avail): When OP was not visited it must
	be available.

2018-08-31  David Malcolm  <dmalcolm@redhat.com>

	* tree-vrp.c (copy_value_range): Convert param "from" from
	"value_range *" to "const value_range *".
	(range_is_null): Likewise for param "vr".
	(range_int_cst_p): Likewise.
	(range_int_cst_singleton_p): Likewise.
	(symbolic_range_p): Likewise.
	(value_ranges_intersect_p): Likewise for both params.
	(value_range_nonnegative_p): Likewise for param "vr".
	(value_range_constant_singleton): Likewise.
	(vrp_set_zero_nonzero_bits): Likewise for param "ar".
	(extract_range_into_wide_ints): Likewise for param "vr".
	(extract_range_from_multiplicative_op): Likewise for params "vr0"
	and "vr1".
	(vrp_can_optimize_bit_op): Likewise.
	(extract_range_from_binary_expr_1): Likewise for params "vr0_" and
	"vr1_".
	(extract_range_from_unary_expr): Likewise.
	(debug_value_range): Likewise for param "vr".
	(value_range::dump): Add "const" qualifier.
	(vrp_prop::check_array_ref): Convert local "vr" from
	"value_range *" to "const value_range *".
	(vrp_prop::check_mem_ref): Likewise.
	(vrp_prop::visit_stmt): Likewise for local "old_vr".
	(vrp_intersect_ranges_1): Likewise for param "vr_1".
	(vrp_intersect_ranges): Likewise.
	(simplify_stmt_for_jump_threading): Likewise for local "vr".
	(vrp_prop::vrp_finalize): Likewise.
	* tree-vrp.h (value_range::dump): Add "const" qualifier.
	(vrp_intersect_ranges): Add "const" qualifier to params as above.
	(extract_range_from_unary_expr): Likewise.
	(value_range_constant_singleton): Likewise.
	(symbolic_range_p): Likewise.
	(copy_value_range): Likewise.
	(extract_range_from_binary_expr_1): Likewise.
	(range_int_cst_p): Likewise.
	(vrp_set_zero_nonzero_bits): Likewise.
	(range_int_cst_singleton_p): Likewise.

2018-08-31  Vlad Lazar  <vlad.lazar@arm.com>

	* config/aarch64/arm_neon.h (vabsd_s64): New.
	(vnegd_s64): Likewise.

2018-08-31  Martin Jambor  <mjambor@suse.cz>

	* ipa-cp.c (estimate_local_effects): Replace wrong MAX with MIN.

2018-08-31  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_item::add_type): Use
	sem_item::m_type_hash_cache.
	* ipa-icf.h: Move the cache from sem_item_optimizer
	to sem_item.

2018-08-31  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Backwards Compatibility): Remove implicit
	extern C leeway of () being (...).

2018-08-31  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* ipa-inline.c (can_inline_edge_by_limits_p): Fix typos in comment.

2018-08-31  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/86684
	PR target/87149
	* config/rs6000/rs6000.md (lround<mode>di2): Gate on TARGET_FPRND.

2018-08-31  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/87138
	* expmed.c (expand_mult_const): Use immed_wide_int_const instead of
	gen_int_mode.  Formatting fixes.

2018-08-30  Sandra Loosemore  <sandra@codesourcery.com>

	* target.def (custom_function_descriptors): Improve documentation.
	* doc/tm.texi.in (Trampolines): Expand discussion of function
	descriptors and move TARGET_CUSTOM_FUNCTION_DESCRIPTORS to the
	beginning of the section.
	* doc/tm.texi: Regenerated.

2018-08-30  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* cfg.h (class auto_edge_flag): Spell out the template-id of the
	base class in the initializer list.  This is a workaround for
	building with older GCC.
	(class auto_bb_flag): Likewise.

2018-08-30  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/altivec.md (altivec_eq<mode>): Remove star.
	(altivec_vcmpequ<VI_char>_p): Remove star.
	* config/rs6000/rs6000-string.c (do_load_for_compare): Support
	vector load modes.
	(expand_strncmp_vec_sequence): New function.
	(emit_final_str_compare_vec): New function.
	(expand_strn_compare): Add support for vector strncmp.
	* config/rs6000/rs6000.opt (-mstring-compare-inline-limit): Change
	length specification to bytes.
	* config/rs6000/vsx.md (vsx_ld_elemrev_v16qi_internal): Remove star.
	(vcmpnezb_p): New pattern.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Update documentation
	for option -mstring-compare-inline-limit.

2018-08-30  Thiago Macieira  <thiago.macieira@intel.com>

	* config/i386/i386.c (PTA_WESTMERE): Remove PTA_AES.
	(PTA_SKYLAKE): Add PTA_AES.
	(PTA_GOLDMONT): Likewise.

2018-08-29  Jan Hubicka  <jh@suse.cz>

	PR lto/86517
	* lto-opts.c (lto_write_options): Always stream PIC/PIE mode.
	* lto-wrapper.c (merge_and_complain): Fix merging of PIC/PIE.

2018-08-29  Jan Hubicka  <jh@suse.cz>

	* lto-streamer-out.c (DFS::DFS_write_tree_body): Do not follow
	TYPE_STUB_DECL.
	(hash_tree): Do not visit TYPE_STUB_DECL.
	* tree-streamer-out.c (write_ts_type_common_tree_pointers): Do not
	stream TYPE_STUB_DECL.
	* tree-streamer-in.c (lto_input_ts_type_common_tree_pointers): Likewise.
	* ipa-utils.h (type_with_linkage_p): Do not rely on TYPE_STUB_DECL
	after free_lang_data.
	(type_in_anonymous_namespace_p): Likewise.

2018-08-29  Jan Hubicka  <jh@suse.cz>

	* sreal.h (SREAL_PART_BITS): Change to 31; remove seemingly unnecessary
	comment that it has to be even number.
	(class sreal): Change m_sig type to int32_t.
	* sreal.c (sreal::dump, sreal::to_int, opreator+, operator-): Use
	int64_t for temporary calculations.
	(sreal_verify_basics): Drop one bit from minimum and maximum.

2018-08-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87147
	* tree-ssa-sccvn.c (SSA_VISITED): New function.
	(visit_phi): When the degenerate result is from the backedge and
	we didn't visit its definition yet drop to VARYING.
	(do_rpo_vn): Properly mark blocks with incoming backedges as executable.

2018-08-29  Jan Hubicka  <jh@suse.cz>

	* lto-streamer-out.c (DFS::DFS_write_tree_body): Do not walk
	DECL_VINDEX.
	(hash_tree): Likewise.

2018-08-29  Jan Hubicka  <jh@suse.cz>

	* tree.c (find_decls_types_r): Walk also TYPE_NEXT_PTR_TO
	and TYPE_NEXT_REF_TO.

2018-08-29  Jan Hubicka  <jh@suse.cz>

	* sreal.h (SREAL_PART_BITS): Change to 31; remove seemingly unnecessary
	comment that it has to be even number.
	(class sreal): Change m_sig type to int32_t.
	* sreal.c (sreal::dump, sreal::to_int, opreator+, operator-): Use
	int64_t for temporary calculations.
	(sreal_verify_basics): Drop one bit from minimum and maximum.

2018-08-30  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64.c (aarch64_expand_movmem): Set TImode max.

2018-08-30  Vlad Lazar  <vlad.lazar@arm.com>

	PR middle-end/86995
	* expmed.c (canonicalize_comparison): Use wi::sub instead of wi::add
	if to_add is negative.

2018-08-29  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR middle-end/87053
	* builtins.c (c_strlen): Improve range checks.

2018-08-29  Martin Sebor  <msebor@redhat.com>
	    Jeff Law  <law@redhat.com>

	PR tree-optimization/86714
	PR tree-optimization/86711
	* builtins.c (c_strlen): Add arguments to call to string_constant.
	* expr.c (string_constant): Add argument.  Detect missing nul
	terminator and outermost declaration it's missing in.
	* expr.h (string_constant): Add argument.
	* fold-const.c (read_from_constant_string): Add arguments to call to
	string_constant.
	(c_getstr): Likewise.
	* tree-ssa-forwprop.c (simplify_builtin_call): Likewise.
	to string_constant.
	* tree-ssa-strlen.c (get_stridx): Likewise.

2018-08-29  Jan Hubicka  <jh@suse.cz>

	* tree-streamer-in.c (lto_input_ts_function_decl_tree_pointers):
	Do not stream DECL_VINDEX.
	* tree-streamer-out.c (write_ts_function_decl_tree_pointers): Likewise.
	* tree.c (free_lang_data_in_decl): Clear DECL_VINDEX.
	(decl_function_context): Use DECL_VIRTUAL_P rather than DECL_VINDEX.

2018-08-29  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vuse_ssa_val): Return NULL for unvisited
	virtual operands that are not default defs to honor region
	boundaries.
	(rpo_vn_valueize): Remove ineffective code here.

2018-08-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87132
	* tree-ssa-alias.c (get_continuation_for_phi): Do not translate
	when skipping defs reachable over backedges.

2018-08-29  Richard Biener  <rguenther@suse.de>

	* tree-core.h: Document use of deprecated_flag in SSA_NAME.
	* tree.h (SSA_NAME_POINTS_TO_READONLY_MEMORY): Define.
	* tree-into-ssa.c (pass_build_ssa::execute): Initialize
	function parameters SSA_NAME_POINTS_TO_READONLY_MEMORY from fnspec.
	* tree-ssa-sccvn.c (const_parms, init_const_parms): Remove.
	(vn_reference_lookup_3): Remove use of const_parms.
	(free_rpo_vn): Do not free const_parms.
	(do_rpo_vn): Do not call init_const_parms.
	* tree-ssa-alias.c (refs_may_alias_p_1): Honor
	SSA_NAME_POINTS_TO_READONLY_MEMORY.
	(call_may_clobber_ref_p_1): Likewise.

2018-08-29  Alexander Monakov  <amonakov@ispras.ru>

	PR other/86726
	* invoke.texi (Optimization Options): List -ftree-scev-cprop.
	(-O): Ditto.
	(-ftree-scev-cprop): Document.

2018-08-29  Jan Hubicka  <jh@suse.cz>

	* sreal.h (normalize, normalize_up, normalize_down): Add new_sig/new_exp
	parameters.
	(sreal constructor): Update.
	* sreal.c (sreal:operator+, sreal:operator-, sreal:operator*,
	sreal:operator/): Update.

2018-08-29  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (switch_conversion::expand):
	Strenghten assumption about gswitch statements.

2018-08-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87117
	* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_stmt): Only
	re-value-number released SSA VDEFs.

2018-08-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87126
	* tree-ssa-sccvn.c (vn_reference_insert): Remove assert.

2018-08-28  Jim Wilson  <jimw@sifive.com>

	* config/riscv/pic.md: Rewrite.
	* config/riscv/riscv.c (riscv_address_insns): Return cost of 3 for
	invalid address.
	* config/riscv/riscv.md (ZERO_EXTEND_LOAD): Delete.
	(SOFTF, default_load, softload, softstore): New.

2018-08-28  Jeff Law  <law@redhat.com>

	* fold-const.c (fold_binary_loc): Remove recently added assert.

2018-08-28  Joern Rennecke  <joern.rennecke@riscy-ip.com>

	* genpreds.c (write_predicate_subfunction): Also add ATTRIBUTE_UNUSED
	to OP parmeter of generated function.

2018-08-28  MCC CS  <deswurstes@users.noreply.github.com>

	PR tree-optimization/87009
	* match.pd: Add boolean optimizations.

2018-08-28  Martin Sebor  <msebor@redhat.com>

	PR middle-end/86631
	* calls.c (alloc_max_size): Treat HOST_WIDE_INT special.
	* gimple-ssa-warn-alloca.c (adjusted_warn_limit): New function.
	(pass_walloca::gate): Use it.
	(alloca_call_type): Same.
	(pass_walloca::execute): Same.
	* stor-layout.c (layout_decl): Treat HOST_WIDE_INT special.

2018-08-28  David Malcolm  <dmalcolm@redhat.com>

	* dumpfile.h (ATTRIBUTE_GCC_DUMP_PRINTF): Change version check on
	GCC_VERSION for usage of "__gcc_dump_printf__" format from
	>= 3005 to >= 9000.

2018-08-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87124
	* tree-ssa-sccvn.c (vn_lookup_simplify_result): Guard against
	constants before looking up avail.

2018-08-28  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/87099
	* calls.c (maybe_warn_nonstring_arg): Punt early if
	warn_stringop_overflow is zero.  Don't call get_range_strlen
	on 3rd argument, keep iterating until lenrng[1] is INTEGER_CST.
	Swap comparison operands to have constants on rhs.  Only use
	lenrng[1] if non-NULL and INTEGER_CST.  Don't uselessly
	increment lenrng[0].

2018-08-28  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-ssa-sccvn.c (fully_constant_vn_reference_p): Fix unguarded
	use of tree_to_shwi.  Remove duplicated test for the size being
	a whole number of bytes.

2018-08-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87117
	* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_cleanup):
	Handle removed stmt without LHS (GIMPLE_NOP).

2018-08-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87117
	* tree-ssa-sccvn.c (fully_constant_vn_reference_p): Exclude
	void which is is_gimple_reg_type by checking for COMPLETE_TYPE_P.

2018-08-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87117
	* tree-ssa-pre.c (compute_avail): Do not make expressions
	with predicated values available.
	(get_expr_value_id): Assert we do not run into predicated value
	expressions.

2018-08-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87117
	* tree-ssa-operands.c (add_stmt_operand): STRING_CST may
	get virtual operands.
	(get_expr_operands): Handle STRING_CST like other decls.

2018-08-28  Martin Liska  <mliska@suse.cz>

	* tree.h: Update documentation of fndecl_built_in_p
	functions.


2018-08-27  Jeff Law  <law@redhat.com>
	PR tree-optimization/87110
	* tree-ssa-dse.c (compute_trims): Handle non-constant
	TYPE_SIZE_UNIT.

2018-08-27  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86914
	* tree-ssa-strlen.c (maybe_set_strlen_range): Avoid MEM_REF.

2018-08-27  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/87112
	* builtins.c (expand_builtin_strnlen): Convert c_strlen result to
	the type of the bound argument.

2018-08-27  Jeff Law  <law@redhat.com>

	* tree-ssa-dse.c (compute_trims): Handle case where the reference's
	type does not have a TYPE_SIZE_UNIT.

2018-08-27  Steve Ellcey  <sellcey@cavium.com>

	* config/aarch64/aarch64-speculation.cc: Replace include of cfg.h
	with include of backend.h.

2018-08-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86927
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Properly
	use const cond reduction code.

2018-08-27  Alexander Monakov  <amonakov@ispras.ru>

	PR tree-optimization/85758
	* match.pd ((X & Y) ^ Y): Add :s qualifier to inner expression.

2018-08-27  David Malcolm  <dmalcolm@redhat.com>

	PR c++/87091
	* diagnostic-show-locus.c (class layout_range): Update for
	conversion of show_caret_p to a tri-state.
	(layout_range::layout_range): Likewise.
	(make_range): Likewise.
	(layout::maybe_add_location_range): Likewise.
	(layout::should_print_annotation_line_p): Don't show annotation
	lines for ranges that are SHOW_LINES_WITHOUT_RANGE.
	(layout::get_state_at_point): Update for conversion of
	show_caret_p to a tri-state.  Bail out early for
	SHOW_LINES_WITHOUT_RANGE, so that such ranges don't affect
	underlining or source colorization.
	(gcc_rich_location::add_location_if_nearby): Update for conversion
	of show_caret_p to a tri-state.
	(selftest::test_one_liner_multiple_carets_and_ranges): Likewise.
	(selftest::test_one_liner_fixit_replace_equal_secondary_range):
	Likewise.
	(selftest::test_one_liner_labels): Likewise.
	* gcc-rich-location.c (gcc_rich_location::add_expr): Update for
	conversion of show_caret_p to a tri-state.
	* pretty-print.c (text_info::set_location): Likewise.
	* pretty-print.h (text_info::set_location): Likewise.
	* substring-locations.c (format_warning_n_va): Likewise.
	* tree-diagnostic.c (default_tree_printer): Likewise.
	* tree-pretty-print.c (newline_and_indent): Likewise.

2018-08-27  David Malcolm  <dmalcolm@redhat.com>

	PR c++/87091
	* diagnostic-show-locus.c (get_line_span_for_fixit_hint): Show the
	line above for line-insertion fix-it hints.
	(selftest::test_fixit_insert_containing_newline): Update the
	expected results, and add a test with line-numbering enabled.

2018-08-27  Martin Liska  <mliska@suse.cz>

	PR sanitizer/86962
	* sanopt.c (sanitize_rewrite_addressable_params): Ignore
	params with DECL_HAS_VALUE_EXPR_P.

2018-08-27  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (ix86_expand_set_or_movmem): Dump
	selected expansion strategy.

2018-08-27  Martin Liska  <mliska@suse.cz>

	* builtins.h (is_builtin_fn): Remove and fndecl_built_in_p.
	* builtins.c (is_builtin_fn): Likewise.
	* attribs.c (diag_attr_exclusions): Use new function
	fndecl_built_in_p and remove check for FUNCTION_DECL if
	possible.
	(builtin_mathfn_code): Likewise.
	(fold_builtin_expect): Likewise.
	(fold_call_expr): Likewise.
	(fold_builtin_call_array): Likewise.
	(fold_call_stmt): Likewise.
	(set_builtin_user_assembler_name): Likewise.
	(is_simple_builtin): Likewise.
	* calls.c (gimple_alloca_call_p): Likewise.
	(maybe_warn_nonstring_arg): Likewise.
	* cfgexpand.c (expand_call_stmt): Likewise.
	* cgraph.c (cgraph_update_edges_for_call_stmt_node): Likewise.
	(cgraph_edge::verify_corresponds_to_fndecl): Likewise.
	(cgraph_node::verify_node): Likewise.
	* cgraphclones.c (build_function_decl_skip_args): Likewise.
	(cgraph_node::create_clone): Likewise.
	* config/arm/arm.c (arm_insert_attributes): Likewise.
	* config/i386/i386.c (ix86_gimple_fold_builtin): Likewise.
	* dse.c (scan_insn): Likewise.
	* expr.c (expand_expr_real_1): Likewise.
	* fold-const.c (operand_equal_p): Likewise.
	(fold_binary_loc): Likewise.
	* gimple-fold.c (gimple_fold_stmt_to_constant_1): Likewise.
	* gimple-low.c (lower_stmt): Likewise.
	* gimple-pretty-print.c (dump_gimple_call): Likewise.
	* gimple-ssa-warn-restrict.c (wrestrict_dom_walker::check_call):
	Likewise.
	* gimple.c (gimple_build_call_from_tree): Likewise.
	(gimple_call_builtin_p): Likewise.
	(gimple_call_combined_fn): Likewise.
	* gimplify.c (gimplify_call_expr): Likewise.
	(gimple_boolify): Likewise.
	(gimplify_modify_expr): Likewise.
	(gimplify_addr_expr): Likewise.
	* hsa-gen.c (gen_hsa_insns_for_call): Likewise.
	* ipa-cp.c (determine_versionability): Likewise.
	* ipa-fnsummary.c (compute_fn_summary): Likewise.
	* ipa-param-manipulation.c (ipa_modify_formal_parameters): Likewise.
	* ipa-split.c (visit_bb): Likewise.
	(split_function): Likewise.
	* ipa-visibility.c (cgraph_externally_visible_p): Likewise.
	* lto-cgraph.c (input_node): Likewise.
	* lto-streamer-out.c (write_symbol): Likewise.
	* omp-low.c (setjmp_or_longjmp_p): Likewise.
	(lower_omp_1): Likewise.
	* predict.c (strip_predict_hints): Likewise.
	* print-tree.c (print_node): Likewise.
	* symtab.c (symtab_node::output_to_lto_symbol_table_p): Likewise.
	* trans-mem.c (is_tm_irrevocable): Likewise.
	(is_tm_load): Likewise.
	(is_tm_simple_load): Likewise.
	(is_tm_store): Likewise.
	(is_tm_simple_store): Likewise.
	(is_tm_abort): Likewise.
	(tm_region_init_1): Likewise.
	* tree-call-cdce.c (gen_shrink_wrap_conditions): Likewise.
	* tree-cfg.c (verify_gimple_call): Likewise.
	(move_stmt_r): Likewise.
	(stmt_can_terminate_bb_p): Likewise.
	* tree-eh.c (lower_eh_constructs_2): Likewise.
	* tree-if-conv.c (if_convertible_stmt_p): Likewise.
	* tree-inline.c (remap_gimple_stmt): Likewise.
	(copy_bb): Likewise.
	(estimate_num_insns): Likewise.
	(fold_marked_statements): Likewise.
	* tree-sra.c (scan_function): Likewise.
	* tree-ssa-ccp.c (surely_varying_stmt_p): Likewise.
	(optimize_stack_restore): Likewise.
	(pass_fold_builtins::execute): Likewise.
	* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Likewise.
	(mark_all_reaching_defs_necessary_1): Likewise.
	* tree-ssa-dom.c (dom_opt_dom_walker::optimize_stmt): Likewise.
	* tree-ssa-forwprop.c (simplify_builtin_call): Likewise.
	(pass_forwprop::execute): Likewise.
	* tree-ssa-loop-im.c (stmt_cost): Likewise.
	* tree-ssa-math-opts.c (pass_cse_reciprocals::execute): Likewise.
	* tree-ssa-sccvn.c (fully_constant_vn_reference_p): Likewise.
	* tree-ssa-strlen.c (get_string_length): Likewise.
	* tree-ssa-structalias.c (handle_lhs_call): Likewise.
	(find_func_aliases_for_call): Likewise.
	* tree-ssa-ter.c (find_replaceable_in_bb): Likewise.
	* tree-stdarg.c (optimize_va_list_gpr_fpr_size): Likewise.
	* tree-tailcall.c (find_tail_calls): Likewise.
	* tree.c (need_assembler_name_p): Likewise.
	(free_lang_data_in_decl): Likewise.
	(get_call_combined_fn): Likewise.
	* ubsan.c (is_ubsan_builtin_p): Likewise.
	* varasm.c (incorporeal_function_p): Likewise.
	* tree.h (DECL_BUILT_IN): Remove and replace with
	fndecl_built_in_p.
	(DECL_BUILT_IN_P): Transfort to fndecl_built_in_p.
	(fndecl_built_in_p): New.

2018-08-27  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/86847
	* tree-switch-conversion.c (switch_decision_tree::dump_case_nodes):
	Dump also subtree probability.
	(switch_decision_tree::do_jump_if_equal): New function.
	(switch_decision_tree::emit_case_nodes): Handle special
	situations in balanced tree that can be emitted much simpler.
	Fix calculation of probabilities that happen in tree expansion.
	* tree-switch-conversion.h (struct cluster): Add
	is_single_value_p.
	(struct simple_cluster): Likewise.
	(struct case_tree_node): Add new function has_child.
	(do_jump_if_equal): New.

2018-08-27  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (bit_test_cluster::find_bit_tests):
	Add new argument to bit_test_cluster constructor.
	(bit_test_cluster::emit): Set bits really number of values
	handlel by a test.
	(bit_test_cluster::hoist_edge_and_branch_if_true): Add
	probability argument.
	* tree-switch-conversion.h (struct bit_test_cluster):
	Add m_handles_entire_switch.

2018-08-27  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/86702
	* tree-switch-conversion.c (jump_table_cluster::emit):
	Make probabilities even for values in jump table
	according to number of cases handled.
	(switch_decision_tree::compute_cases_per_edge): Pass
	argument to reset_out_edges_aux function.
	(switch_decision_tree::analyze_switch_statement): Likewise.
	* tree-switch-conversion.h (switch_decision_tree::reset_out_edges_aux):
	Make it static.

2018-08-27  Martin Liska  <mliska@suse.cz>

	* cfgexpand.c (expand_asm_stmt): Use label_to_block and pass
	cfun argument explicitly.
	* gimple-pretty-print.c (dump_gimple_switch): Likewise.
	* hsa-gen.c (gen_hsa_insns_for_switch_stmt): Use new
	function gimple_switch_default_bb.
	(convert_switch_statements):
	(expand_builtins):
	* ipa-fnsummary.c (set_switch_stmt_execution_predicate):
	* stmt.c (label_to_block_fn): Use label_to_block and pass
	cfun argument explicitly and use gimple_switch_label_bb.
	(expand_case): Likewise.
	* tree-cfg.c (lower_phi_internal_fn): Use label_to_block and pass
	cfun argument explicitly. Likewise.
	(make_edges_bb): Likewise.
	(make_cond_expr_edges): Likewise.
	(get_cases_for_edge): Likewise.
	(make_gimple_switch_edges): Likewise.
	(label_to_block_fn): Likewise.
	(label_to_block): Likewise.
	(make_goto_expr_edges): Likewise.
	(make_gimple_asm_edges): Likewise.
	(main_block_label): Likewise.
	(group_case_labels_stmt): Likewise.
	(find_taken_edge_computed_goto): Likewise.
	(find_taken_edge_switch_expr): Likewise.
	(gimple_verify_flow_info): Likewise.
	(gimple_redirect_edge_and_branch): Likewise.
	(gimple_switch_label_bb): New function.
	(gimple_switch_default_bb): Likewise.
	(gimple_switch_edge): Likewise.
	(gimple_switch_default_edge): Likewise.
	* tree-cfg.h (label_to_block_fn): Remove and replace ...
	(label_to_block): ... with this.
	(gimple_switch_label_bb): New.
	(gimple_switch_default_bb): Likewise.
	(gimple_switch_edge): Likewise.
	(gimple_switch_default_edge): Likewise.
	* tree-cfgcleanup.c (convert_single_case_switch): Use
	new gimple functions and pass new argument to label_to_block.
	(cleanup_control_flow_bb):
	* tree-eh.c (make_eh_dispatch_edges): Use label_to_block and pass
	cfun argument explicitly.
	(make_eh_edges): Likewise.
	(redirect_eh_dispatch_edge): Likewise.
	(lower_resx): Likewise.
	(lower_eh_dispatch): Likewise.
	(maybe_remove_unreachable_handlers): Likewise.
	(unsplit_eh): Likewise.
	(cleanup_empty_eh): Likewise.
	(verify_eh_edges): Likewise.
	(verify_eh_dispatch_edge): Likewise.
	* tree-ssa-dom.c (record_edge_info): Likewise.
	* tree-ssa-forwprop.c (simplify_gimple_switch_label_vec): Likewise.
	* tree-ssa-threadedge.c (thread_around_empty_blocks): Likewise.
	(thread_through_normal_block): Likewise.
	* tree-ssa-uncprop.c (associate_equivalences_with_edges): Likewise.
	* tree-ssa-uninit.c (convert_control_dep_chain_into_preds):
	* tree-switch-conversion.c (switch_conversion::collect): Use new
	gimple functions.
	(switch_conversion::check_final_bb): Likewise.
	(switch_conversion::gather_default_values): Pass new argument
	to label_to_block.
	(switch_conversion::build_constructors): Likewise.
	(switch_decision_tree::compute_cases_per_edge): Use new
	gimple_switch_edge function.
	(switch_decision_tree::analyze_switch_statement): Pass new argument
	to label_to_block.
	(switch_decision_tree::try_switch_expansion): Use
	gimple_switch_default_edge.
	* tree-vrp.c (find_switch_asserts): Pass new argument
	to label_to_block.
	* vr-values.c (vr_values::vrp_visit_switch_stmt): Likewise.
	(vr_values::simplify_switch_using_ranges): Likewise.

2018-08-27  Richard Biener  <rguenther@suse.de>

	* cfganal.h (rev_post_order_and_mark_dfs_back_seme): Declare.
	* cfganal.c (rev_post_order_and_mark_dfs_back_seme): New function.

	* tree-ssa-sccvn.h (struct vn_pval): New structure.
	(struct vn_nary_op_s): Add unwind_to member.  Add
	predicated_values flag and put result into a union together
	with a linked list of vn_pval.
	(struct vn_ssa_aux): Add name member to make maintaining
	a map of SSA name to vn_ssa_aux possible.  Remove no longer
	needed info, dfsnum, low, visited, on_sccstack, use_processed
	and range_info_anti_range_p members.
	(run_scc_vn, vn_eliminate, free_scc_vn, vn_valueize): Remove.
	(do_rpo_vn, run_rpo_vn, eliminate_with_rpo_vn, free_rpo_vn):
	New functions.
	(vn_valueize): New global.
	(vn_context_bb): Likewise.
	(VN_INFO_RANGE_INFO, VN_INFO_ANTI_RANGE_P, VN_INFO_RANGE_TYPE,
	VN_INFO_PTR_INFO): Remove.
	* tree-ssa-sccvn.c: ... (rewrite)
	(pass_fre::execute): For -O2+ initialize loops and run
	RPO VN in optimistic mode (iterating).  For -O1 and -Og
	run RPO VN in non-optimistic mode.
	* params.def (PARAM_SCCVN_MAX_SCC_SIZE): Remove.
	(PARAM_RPO_VN_MAX_LOOP_DEPTH): Add.
	* doc/invoke.texi (sccvn-max-scc-size): Remove.
	(rpo-vn-max-loop-depth): Document.
	* tree-ssa-alias.c (walk_non_aliased_vuses): Stop walking
	when valuezing the VUSE signals we walked out of the region.
	* tree-ssa-pre.c (phi_translate_1): Ignore predicated values.
	(phi_translate): Set VN context block to use for availability
	lookup.
	(compute_avail): Likewise.
	(pre_valueize): New function.
	(pass_pre::execute): Adjust to the RPO VN API.

	* tree-ssa-loop-ivcanon.c: Include tree-ssa-sccvn.h.
	(propagate_constants_for_unrolling): Remove.
	(tree_unroll_loops_completely): Perform value-numbering
	on the unrolled bodies loop parent.

2018-08-27  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (compute_antic): Re-use inverted postorder
	for partial antic compute.

2018-08-27  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/87065
	* combine.c (simplify_if_then_else): Formatting fix.
	(if_then_else_cond): Guard MULT optimization with SCALAR_INT_MODE_P
	check.
	(known_cond): Don't return const_true_rtx for vector modes.  Use
	CONST0_RTX instead of const0_rtx.  Formatting fixes.

2018-08-27  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/87069
	* gcov.c (process_file): Record files already processed
	and warn about a file being processed multiple times.

2018-08-27  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* config/aarch64/aarch64.c (aarch64_override_options_internal):
	Set default values for x_aarch64_*_string strings.
	* config/aarch64/aarch64.opt: Remove --{march,mcpu,mtune}==
	prefix.  For -mabi do not print '=ABI' in help and use
	<option_value> format for -msve-vector-bits and -moverride
	options.

2018-08-26  Jeff Law  <law@redhat.com>

	* config/mips/frame-header-opt.c: Include "backend.h" rather than
	"cfg.h"

2018-08-26  Marek Polacek  <polacek@redhat.com>

	PR c++/87029, Implement -Wredundant-move.
	* doc/invoke.texi: Document -Wredundant-move.

2018-08-25  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/87059
	* builtins.c (expand_builtin_strncmp): Convert MIN_EXPR operand
	to the same type as the other.
	* fold-const.c (fold_binary_loc): Assert expectation.

2018-08-25  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_legitimize_pic_address): Clean up
	extraneous parentheses, dead code section and formatting.

2018-08-24  David Malcolm  <dmalcolm@redhat.com>

	PR c++/87091
	* diagnostic-show-locus.c (layout::layout): Ensure the margin is
	wide enough for jumps in the line-numbering to be visible.
	(layout::print_gap_in_line_numbering): New member function.
	(layout::calculate_line_spans): When using line numbering, merge
	line spans that are only 1 line apart.
	(diagnostic_show_locus): When printing line numbers, show gaps in
	line numbering directly, rather than printing headers.
	(selftest::test_diagnostic_show_locus_fixit_lines): Add test of
	line-numbering with multiple line spans.
	(selftest::test_fixit_insert_containing_newline_2): Add test of
	line-numbering, in which the spans are close enough to be merged.

2018-08-24  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-ssa-evrp-analyze.c (set_ssa_range_info): Pass value_range
	to range_includes_zero_p.  Do not special case VR_ANTI_RANGE.
	* tree-vrp.c (range_is_nonnull): Remove.
	(range_includes_zero_p): Accept value_range instead of min/max.
	(extract_range_from_binary_expr_1): Do not early bail on
	POINTER_PLUS_EXPR.
	Use range_includes_zero_p instead of range_is_nonnull.
	(extract_range_from_unary_expr): Use range_includes_zero_p instead
	of range_is_nonnull.
	(vrp_meet_1): Pass value_range to range_includes_zero_p.  Do not
	special case VR_ANTI_RANGE.
	(vrp_finalize): Same.
	* tree-vrp.h (range_includes_zero_p): Pass value_range as argument
	instead of min/max.
	(range_is_nonnull): Remove.
	* vr-values.c (vrp_stmt_computes_nonzero): Use
	range_includes_zero_p instead of range_is_nonnull.
	(extract_range_basic): Pass value_range to range_includes_zero_p
	instead of range_is_nonnull.

2018-08-24  Uros Bizjak  <ubizjak@gmail.com>

	* emit-rtl.c (init_emit_once): Do not emit MODE_POINTER_BOUNDS RTXes.
	* emit-rtl.h (rtl_data): Remove return_bnd.
	* explow.c (trunc_int_for_mode): Do not handle POINTER_BOUNDS_MODE_P.
	* function.c (diddle_return_value): Do not handle crtl->return_bnd.
	* genmodes.c (complete_mode): Do not handle MODE_POINTER_BOUNDS.
	(POINTER_BOUNDS_MODE): Remove definition.
	(make_pointer_bounds_mode): Remove.
	(get_mode_class): Do not handle MODE_POINTER_BOUNDS.
	* machmode.h (POINTER_BOUNDS_MODE_P): Remove definition.
	(scalare_mode::includes_p): Do not handle MODE_POINTER_BOUNDS.
	* mode-classes.def: Do not define MODE_POINTER_BOUNDS.
	* stor-layout.c (int_mode_for_mode): Do not handle MODE_POINTER_BOUNDS.
	* tree-core.h (enum tree_index): Remove TI_POINTER_BOUNDS_TYPE.
	* varasm.c (output_constant_pool_2): Do not handle MODE_POINTER_BOUNDS.

	* config/i386/i386-modes.def (BND32, BND64): Remove.
	* config/i386/i386.c (dbx_register_map): Remove bound registers.
	(dbx64_register_map): Ditto.
	(svr4_dbx_register_map): Ditto.
	(indirect_thunk_bnd_needed): Remove.
	(indirect_thunks_bnd_used): Ditto.
	(indirect_return_bnd_needed): Ditto.
	(indirect_return_via_cx_bnd): Ditto.
	(enum indirect_thunk_prefix): Remove indirect_thunk_prefix_bnd.
	(indirect_thunk_name): Remove handling of indirect_thunk_prefix_bnd.
	(output_indirect_thunk): Ditto.  Remove need_prefix argument.
	(output_indirect_thunk_function): Remove handling of
	indirect_return_bnd_needed, indirect_return_via_cx_bnd,
	indirect_thunk_bnd_needed and indirect_thunks_bnd_used variables.
	(ix86_save_reg): Remove handling of crtl->return_bnd.
	(ix86_legitimate_constant_p): Remove handling of POINTER_BOUNDS_MODE_P.
	(ix86_print_operand_address_as): Remove handling of UNSPEC_BNDMK_ADDR
	and UNSPEC_BNDLX_ADDR.
	(ix86_output_indirect_branch_via_reg): Remove handling of
	indirect_thunk_prefix_bnd.
	(ix86_output_indirect_branch_via_push): Ditto.
	(ix86_output_function_return): Ditto.
	(ix86_output_indirect_function_return): Ditto.
	(avoid_func_arg_motion): Do not handle UNSPEC_BNDSTX.
	* config/i386/i386.h (FIXED_REGISTERS): Remove bound registers.
	(CALL_USED_REGISTERS): Ditto.
	(REG_ALLOC_ORDER): Update for removal of bound registers.
	(HI_REGISTER_NAMES): Ditto.
	* config/i386/i386.md (UNSPEC_BNDMK, UNSPEC_BNDMK_ADDR, UNSPEC_BNDSTX)
	(UNSPEC_BNDLDX, UNSPEC_BNDLDX_ADDR, UNSPEC_BNDCL, UNSPEC_BNDCU)
	(UNSPEC_BNDCN, UNSPEC_MPX_FENCE): Remove.
	(BND0_REG, BND1_REG, BND2_REG, BND3_REG): Remove
	(FIRST_PSEUDO_REG): Update.
	(BND): Remove mode iterator.
	* config/i386/predicates.md (bnd_mem_operator): Remove.

2018-08-24  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_bswap): Handle variable-length
	vectors.

2018-08-24  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vect_transform_slp_perm_load): Separate out
	the case in which the permute needs only a single element and
	repeats for every vector of the result.  Extend that case to
	handle variable-length vectors.
	* tree-vect-stmts.c (vectorizable_load): Update accordingly.

2018-08-24  H.J. Lu  <hongjiu.lu@intel.com>

	PR debug/79342
	* dwarf2out.c (save_macinfo_strings): Call set_indirect_string
	on DW_MACINFO_start_file for -gsplit-dwarf -g3.

2018-08-24  Richard Biener  <rguenther@suse.de>

	* cfg.h (struct control_flow_graph): Add edge_flags_allocated and
	bb_flags_allocated members.
	(auto_flag): New RAII class for allocating flags.
	(auto_edge_flag): New RAII class for allocating edge flags.
	(auto_bb_flag): New RAII class for allocating bb flags.
	* cfgloop.c (verify_loop_structure): Allocate temporary edge
	flag dynamically.
	* cfganal.c (dfs_enumerate_from): Remove use of visited sbitmap
	in favor of temporarily allocated BB flag.
	* hsa-brig.c: Re-order includes.
	* hsa-dump.c: Likewise.
	* hsa-regalloc.c: Likewise.
	* print-rtl.c: Likewise.
	* profile-count.c: Likewise.

2018-08-24  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/86989
	* config/rs6000/rs6000.c (toc_relative_expr_p): Check that the base is
	the TOC register.

2018-08-24  Aldy Hernandez  <aldyh@redhat.com>

	PR 87073/bootstrap
	* wide-int-range.cc (wide_int_range_div): Do not ignore result
	from wide_int_range_multiplicative_op.

2018-08-23  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* tree-vect-data-refs.c (vect_grouped_store_supported): Fix typo
	"permutaion".

2018-08-23  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	* genmatch.c (parser::parse_operation): Fix typo 'exapnded'
	to 'expanded'.

2018-08-23  Alexander Monakov  <amonakov@ispras.ru>

	* tree-scalar-evolution.c (final_value_replacement_loop): Dump
	full GENERIC expression used for replacement.

2018-08-23  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (abs_extent_range): Remove.
	(extract_range_into_wide_ints): Pass wide ints by reference.
	(extract_range_from_binary_expr_1): Rewrite the *DIV_EXPR code.
	Pass wide ints by reference in all calls to
	extract_range_into_wide_ints.
	* wide-int-range.cc (wide_int_range_div): New.
	* wide-int-range.h (wide_int_range_div): New.
	(wide_int_range_includes_zero_p): New.
	(wide_int_range_zero_p): New.

2018-08-23  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64.md (arches): New enum.
	(arch): New enum attr.
	(arch_enabled): New attr.
	(enabled): Now uses arch_enabled only.
	(simd, sve, fp16): Removed attribute.
	(fp): Attr now defined in terms of 'arch'.
	(*mov<mode>_aarch64, *movsi_aarch64, *movdi_aarch64, *movti_aarch64,
	*movhf_aarch64, <optab><fcvt_target><GPF:mode>2,
	<FCVT_F2FIXED:fcvt_fixed_insn><GPF:mode>3,
	<FCVT_FIXED2F:fcvt_fixed_insn><GPI:mode>3): Merge 'fp' and 'simd'
	attributes into 'arch'.
	(*movsf_aarch64, *movdf_aarch64, *movtf_aarch64, *add<mode>3_aarch64,
	subdi3, neg<mode>2, <optab><mode>3, one_cmpl<mode>2,
	*<NLOGICAL:optab>_one_cmpl<mode>3, *xor_one_cmpl<mode>3,
	*aarch64_ashl_sisd_or_int_<mode>3, *aarch64_lshr_sisd_or_int_<mode>3,
	*aarch64_ashr_sisd_or_int_<mode>3, *aarch64_sisd_ushl): Convert use of
	'simd' attribute into 'arch'.
	(load_pair_sw_<SX:mode><SX2:mode>, load_pair_dw_<DX:mode><DX2:mode>,
	store_pair_sw_<SX:mode><SX2:mode>, store_pair_dw_<DX:mode><DX2:mode>):
	Convert use of 'fp' attribute to 'arch'.
	* config/aarch64/aarch64-simd.md (move_lo_quad_internal_<mode>,
	move_lo_quad_internal_<mode>): (different modes) Merge 'fp' and 'simd'
	into 'arch'.
	(move_lo_quad_internal_be_<mode>, move_lo_quad_internal_be_<mode>):
	(different modes) Merge 'fp' and 'simd' into 'arch'.
	(*aarch64_combinez<mode>, *aarch64_combinez_be<mode>): Merge 'fp' and
	'simd' into 'arch'.

2018-08-23  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/87026
	* expmed.c (canonicalize_comparison): If we can no longer create
	pseudoregisters, don't.

2018-08-23  Richard Earnshaw  <rearnsha@arm.com>

	PR target/86951
	* config/arm/arm-protos.h (arm_emit_speculation_barrier): New
	prototype.
	* config/arm/arm.c (speculation_barrier_libfunc): New static
	variable.
	(arm_init_libfuncs): Initialize it.
	(arm_emit_speculation_barrier): New function.
	* config/arm/arm.md (speculation_barrier): Call
	arm_emit_speculation_barrier for architectures that do not have
	DSB or ISB.
	(speculation_barrier_insn): Only match on Armv7 or later.

2018-08-23  Richard Biener  <rguenther@suse.de>

	PR middle-end/87024
	* tree-inline.c (copy_bb): Drop unused __builtin_va_arg_pack_len
	calls.

2018-08-23  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_evpc_sve_tbl): Fix handling
	of single-vector TBLs.
	(aarch64_vectorize_vec_perm_const): Set one_vector_p when only
	one input is given.

2018-08-23  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/85910
	* config/aarch64/aarch64.c (aarch64_expand_vec_perm_const_1): Fix
	aarch64_evpc_tbl guard.

2018-08-22  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* tree-ssa-dse.c (compute_trims): Avoid folding away undefined
	behaviour.

2018-08-22  Martin Sebor  <msebor@redhat.com>

	PR middle-end/87052
	* tree-pretty-print.c (pretty_print_string): Add argument.
	(dump_generic_node): Call to pretty_print_string with string size.

2018-08-22  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/86771
	* combine.c (try_combine): Do not allow splitting a resulting PARALLEL
	of two SETs into those two SETs, one to be placed at i2, if that SETs
	destination is modified between i2 and i3.

2018-08-22  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86725
	* tree-vect-loop.c (vect_inner_phi_in_double_reduction_p): New
	function.
	(vect_analyze_scalar_cycles_1): Check it.

2018-08-22  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86725
	* tree-vect-loop.c (vect_is_simple_reduction): When treating
	an outer loop phi as a double reduction, make sure that the
	single user of the phi result is an inner loop phi.

2018-08-22  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-data-refs.c (vect_analyze_group_access_1): Convert
	grouped stores with gaps to a strided group.

2018-08-22  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (get_group_load_store_type)
	(get_load_store_type): Only test STMT_VINFO_STRIDED_P for the
	first statement in a group.

2018-08-22  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (LINK_COMMAND_SPEC_A): Sync LTO options with
	the sequence used in gcc/gcc.c.

2018-08-22  Iain Sandoe  <iain@sandoe.co.uk>

	PR other/704
	* gcc-ar.c (main): Don’t try to invoke the plug-in if we’re not
	building it.

2018-08-22  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin10.h (LINK_GCC_C_SEQUENCE_SPEC): Adjust to use the
	Darwin10-specific unwinder-shim.
	* config/darwin12.h (LINK_GCC_C_SEQUENCE_SPEC): Remove.
	* config/rs6000/darwin.h (DARWIN_CRT1_SPEC, DARWIN_DYLIB1_SPEC):
	New to cater for Darwin10 Rosetta.

2018-08-22  Iain Sandoe  <iain@sandoe.co.uk>

	* config/i386/i386.c (ix86_output_addr_diff_elt): Move the MACH-O
	specific test before the one for HAVE_AS_GOTOFF_IN_DATA.

2018-08-22  Iain Sandoe  <iain@sandoe.co.uk>

	PR bootstrap/81033
	PR target/81733
	PR target/52795
	* gcc/dwarf2out.c (FUNC_SECOND_SECT_LABEL): New.
	(dwarf2out_switch_text_section): Generate a local label for the
	second function sub-section and apply it as the second FDE start
	label.
	* gcc/final.c (final_scan_insn_1): Emit second FDE label after the
	second sub-section start.

2018-08-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86988
	* tree-vrp.c (vrp_prop::check_mem_ref): Bail out on VLAs.

2018-08-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86945
	* tree-cfg.c (generate_range_test): Use unsigned arithmetic.

2018-08-22  Alexandre Oliva <oliva@adacore.com>

	* config/rs6000/rs6000.c (SMALL_DATA_RELOC, SMALL_DATA_REG): Add
	a comment about how uses of r2 for .sdata2 come about.

2018-08-22  Alexandre Oliva <aoliva@redhat.com>

	* tree-ssa-reassoc.c (is_reassociable_op): Fix cut&pasto.

2018-08-21  Marek Polacek  <polacek@redhat.com>

	PR c++/86981, Implement -Wpessimizing-move.
	* doc/invoke.texi: Document -Wpessimizing-move.

2018-08-21  Jan Hubicka  <jh@suse.cz>

	* tree.c (find_decls_types_r): Do not check for redundant typedefs.
	* tree.h (is_redundant_typedef): Remove.
	* dwarf2out.c (is_redundant_typedef): Turn into static function.

2018-08-21  Jan Hubicka  <jh@suse.cz>

	* tree.c (free_lang_data_in_decl): Remove types from DECL_CONTEXT
	when possible.

2018-08-21  Tamar Christina  <tamar.christina@arm.com>

	* expmed.c (extract_low_bits): Reject invalid subregs early.

2018-08-21  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR middle-end/86121
	* tree-ssa-strlen.c (adjust_last_stmt): Avoid folding away undefined
	behaviour.

2018-08-21  Rasmus Villemoes  <rv@rasmusvillemoes.dk>

	* config/vxworks.h: Guard vxworks_asm_out_constructor and
	vxworks_asm_out_destructor by !HAVE_INITFINI_ARRAY_SUPPORT
	* config/vxworks.c: Likewise.

2018-08-21  Rasmus Villemoes  <rv@rasmusvillemoes.dk>

	* config/vxworks.c: Set targetm.have_ctors_dtors
	if HAVE_INITFINI_ARRAY_SUPPORT.
	* config/vxworks.h: Set SUPPORTS_INIT_PRIORITY
	if HAVE_INITFINI_ARRAY_SUPPORT.

2018-08-21  Rasmus Villemoes  <rv@rasmusvillemoes.dk>

	* config/vxworks.h: Add $(WIND_BASE)/target/h/wrn/coreip to
	default search path for VxWorks < 7.

2018-08-21  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* gimple-ssa-sprintf.c (decl_constant_value): Remove.
	(get_format_string): Refer to c_getstr.

2018-08-21  Tom de Vries  <tdevries@suse.de>

	* cgraph.h (debuginfo_early_init, debuginfo_init, debuginfo_fini)
	(debuginfo_start, debuginfo_stop, debuginfo_early_start)
	(debuginfo_early_stop): Declare.
	* cgraphunit.c (debuginfo_early_init, debuginfo_init, debuginfo_fini)
	(debuginfo_start, debuginfo_stop, debuginfo_early_start)
	(debuginfo_early_stop): New function.
	(symbol_table::finalize_compilation_unit): Call debuginfo_early_start
	and debuginfo_early_stop.
	* dwarf2out.c (dwarf2out_finish, dwarf2out_early_finish): Dump dwarf.
	* toplev.c (compile_file): Call debuginfo_start and debuginfo_stop.
	(general_init): Call debuginfo_early_init.
	(finalize): Call debuginfo_fini.
	(do_compile): Call debuginfo_init.
	* doc/invoke.texi (@gccoptlist): Add -fdump-debug and
	-fdump-early-debug.
	(@item -fdump-debug, @item -fdump-earlydebug): Add.

2018-08-21  Tom de Vries  <tdevries@suse.de>

	* dwarf2out.c (print_dw_val, print_loc_descr, print_die): Handle
	flag_dump_noaddr and flag_dump_unnumbered.

2018-08-21  Aldy Hernandez  <aldyh@redhat.com>

	* wide-int-range.cc (wide_int_range_abs): New.
	(wide_int_range_order_set): Rename from wide_int_range_min_max.
	* wide-int-range.h (wide_int_range_abs): New.
	(wide_int_range_min_max): New.
	* tree-vrp.c (extract_range_from_unary_expr): Rewrite ABS_EXPR
	case to call wide_int_range_abs.
	Rewrite MIN/MAX_EXPR to call wide_int_range_min_max.
	(extract_range_from_abs_expr): Delete.

2018-08-20  Michael Meissner  <meissner@linux.ibm.com>

	PR target/87033
	* config/rs6000/rs6000.md (extendsi<mode>2): Change constraints
	from 'Y' to 'YZ' to enable the LWAX instruction to be generated
	for indexed loads.

2018-08-20  Nathan Sidwell  <nathan@acm.org>
	    Jeff Law <law@redhat.com>

	* config/s390/s390-c (s390_macro_to_expand): Use cpp_macro_p.
	* config/spu/spu-c.c (spu_macro_to_expand): Likewise.

2018-08-20  David Malcolm  <dmalcolm@redhat.com>

	PR other/84889
	* attribs.c (diag_attr_exclusions): Add auto_diagnostic_group instance.
	(decl_attributes): Likewise.
	* calls.c (maybe_warn_nonstring_arg): Add auto_diagnostic_group
	instance.
	* cgraphunit.c (maybe_diag_incompatible_alias): Likewise.
	* diagnostic-core.h (class auto_diagnostic_group): New class.
	* diagnostic.c (diagnostic_initialize): Initialize the new fields.
	(diagnostic_report_diagnostic): Handle the first diagnostics within
	a group.
	(emit_diagnostic): Add auto_diagnostic_group instance.
	(inform): Likewise.
	(inform_n): Likewise.
	(warning): Likewise.
	(warning_at): Likewise.
	(warning_n): Likewise.
	(pedwarn): Likewise.
	(permerror): Likewise.
	(error): Likewise.
	(error_n): Likewise.
	(error_at): Likewise.
	(sorry): Likewise.
	(fatal_error): Likewise.
	(internal_error): Likewise.
	(internal_error_no_backtrace): Likewise.
	(auto_diagnostic_group::auto_diagnostic_group): New ctor.
	(auto_diagnostic_group::~auto_diagnostic_group): New dtor.
	* diagnostic.h (struct diagnostic_context): Add fields
	"diagnostic_group_nesting_depth",
	"diagnostic_group_emission_count", "begin_group_cb",
	"end_group_cb".
	* gimple-ssa-isolate-paths.c (find_implicit_erroneous_behavior):
	Add auto_diagnostic_group instance(s).
	(find_explicit_erroneous_behavior): Likewise.
	* gimple-ssa-warn-alloca.c (pass_walloca::execute): Likewise.
	* gimple-ssa-warn-restrict.c (maybe_diag_offset_bounds): Likewise.
	* gimplify.c (warn_implicit_fallthrough_r): Likewise.
	(gimplify_va_arg_expr): Likewise.
	* hsa-gen.c (HSA_SORRY_ATV): Likewise.
	(HSA_SORRY_AT): Likewise.
	* ipa-devirt.c (compare_virtual_tables): Likewise.
	(warn_odr): Likewise.
	* multiple_target.c (expand_target_clones): Likewise.
	* opts-common.c (cmdline_handle_error): Likewise.
	* reginfo.c (globalize_reg): Likewise.
	* substring-locations.c (format_warning_n_va): Likewise.
	* tree-inline.c (expand_call_inline): Likewise.
	* tree-ssa-ccp.c (pass_post_ipa_warn::execute): Likewise.
	* tree-ssa-loop-niter.c
	(do_warn_aggressive_loop_optimizations): Likewise.
	* tree-ssa-uninit.c (warn_uninit): Likewise.
	* tree.c (warn_deprecated_use): Likewise.

2018-08-20  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87014
	* config/i386/i386.md (eh_return): Always update EH return
	address in word_mode.

2018-08-20  Chung-Lin Tang  <cltang@codesourcery.com>

	* targhooks.c (std_gimplify_va_arg_expr): Properly handle case of when
	TARGET_SPLIT_COMPLEX_ARG is defined.

2018-08-20  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* expr.c (store_field): Change gcc_assert to gcc_checking_assert.

2018-08-20  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR target/86984
	* expr.c (expand_assignment): Assert that bitpos is positive.
	(store_field): Likewise
	(expand_expr_real_1): Make sure that bitpos is positive.
	* config/alpha/alpha.h (CONSTANT_ADDRESS_P): Avoid signed
	integer overflow.

2018-08-20  Nathan Sidwell  <nathan@acm.org>

	* Makefile.in (CPP_ID_DATA_H): Delete.
	(CPP_INTERNAL_H): Don't add it.
	(GTFILES): Replace CPP_ID_DATA_H with CPPLIB_H.
	* gengtype.c (open_base_files): Replace cpp-id-data.h with cpplib.h

2018-08-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/78655
	* tree-vrp.c (extract_range_from_binary_expr_1): Make
	pointer + offset nonnull if either operand is nonnull work.

2018-08-20  Tom de Vries  <tdevries@suse.de>

	* dwarf2out.c (add_scalar_info): Don't add reference to existing die
	unless the referenced die describes the added property using
	DW_AT_location or DW_AT_const_value.  Fall back to exprloc case.
	Otherwise, add a DW_AT_location to the referenced die.

2018-08-19  Uros Bizjak  <ubizjak@gmail.com>

	PR target/86994
	* config/i386/i386.c (ix86_rtx_costs) [case SET]: Check source for
	register_operand when calling ix86_set_reg_reg_cost.
	[case CONST_INT, case CONST, case LABEL_REF, case SYMBOL_REF]:
	Set *total to 0 for operands that satisfy x86_64_immediate_operand
	predicate and to 1 otherwise.

2018-08-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_override_options): If -gsplit-dwarf is set,
	emit a diagnostic that it is not supported and reset the option.
	* config/darwin.h (DRIVER_SELF_SPECS): Note that gsplit-dwarf is not
	supported and consume the option.  (ASM_FINAL_SPEC): New.

2018-08-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/md.texi (Patterns): Use @ref instead of @xref in the middle of
	a sentence.

2018-08-17  Sandra Loosemore  <sandra@codesourcery.com>

	C-SKY port: Documentation

	* doc/extend.texi (C-SKY Function Attributes): New section.
	* doc/invoke.texi (Option Summary): Add C-SKY options.
	(C-SKY Options): New section.
	* doc/md.texi (Machine Constraints): Document C-SKY constraints.

2018-08-17  Jojo  <jijie_rong@c-sky.com>
	    Huibin Wang  <huibin_wang@c-sky.com>
	    Sandra Loosemore  <sandra@codesourcery.com>
	    Chung-Lin Tang  <cltang@codesourcery.com>

	C-SKY port: Backend implementation

	* config/csky/*: New.
	* common/config/csky/*: New.

2018-08-17  Jojo  <jijie_rong@c-sky.com>
	    Huibin Wang  <huibin_wang@c-sky.com>
	    Sandra Loosemore  <sandra@codesourcery.com>
	    Chung-Lin Tang  <cltang@codesourcery.com>
	    Andrew Jenner  <andrew@codesourcery.com>

	C-SKY port: Configury

	* config.gcc (csky-*-*): New.
	* configure.ac: Add csky to targets for dwarf2 debug_line support.
	* configure: Regenerated.

2018-08-17  David Malcolm  <dmalcolm@redhat.com>

	* dump-context.h: Include "dumpfile.h".
	(dump_context::dump_printf_va): Convert final param from va_list
	to va_list *.  Convert from ATTRIBUTE_PRINTF to
	ATTRIBUTE_GCC_DUMP_PRINTF.
	(dump_context::dump_printf_loc_va): Likewise.
	* dumpfile.c: Include "stringpool.h".
	(make_item_for_dump_printf_va): Delete.
	(make_item_for_dump_printf): Delete.
	(class dump_pretty_printer): New class.
	(dump_pretty_printer::dump_pretty_printer): New ctor.
	(dump_pretty_printer::emit_items): New member function.
	(dump_pretty_printer::emit_any_pending_textual_chunks): New member
	function.
	(dump_pretty_printer::emit_item): New member function.
	(dump_pretty_printer::stash_item): New member function.
	(dump_pretty_printer::format_decoder_cb): New member function.
	(dump_pretty_printer::decode_format): New member function.
	(dump_context::dump_printf_va): Reimplement in terms of
	dump_pretty_printer.
	(dump_context::dump_printf_loc_va): Convert final param from va_list
	to va_list *.
	(dump_context::begin_scope): Reimplement call to
	make_item_for_dump_printf.
	(dump_printf): Update for change to dump_printf_va.
	(dump_printf_loc): Likewise.
	(selftest::test_capture_of_dump_calls): Convert "stmt" from
	greturn * to gimple *.  Add a test_decl.  Add tests of dump_printf
	with %T, %E, and %G.
	* dumpfile.h (ATTRIBUTE_GCC_DUMP_PRINTF): New macro.
	(dump_printf): Replace ATTRIBUTE_PRINTF_2 with
	ATTRIBUTE_GCC_DUMP_PRINTF (2, 3).
	(dump_printf_loc): Replace ATTRIBUTE_PRINTF_3 with
	ATTRIBUTE_GCC_DUMP_PRINTF (3, 0).
	* tree-vect-data-refs.c (vect_lanes_optab_supported_p): Convert
	use of HOST_WIDE_INT_PRINT_DEC on unsigned HOST_WIDE_INT "count"
	within a dump_printf_loc call to "%wu".
	(vector_alignment_reachable_p): Merge two dump_printf[_loc] calls,
	converting a use of HOST_WIDE_INT_PRINT_DEC to "%wd".  Add a
	missing space after "=".
	* tree-vect-loop.c (vect_analyze_loop_2) Within a dump_printf
	call, convert use of HOST_WIDE_INT_PRINT_DEC to "%wd".
	* tree-vect-slp.c (vect_slp_bb): Within a dump_printf_loc call,
	convert use of HOST_WIDE_INT_PRINT_UNSIGNED to "%wu".
	* tree-vectorizer.c (try_vectorize_loop_1): Likewise.  Remove
	duplicate "vectorized" from message.

2018-08-17  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/arm/arm-builtins.c (arm_init_simd_builtin_types): Clear
	polyNxK_t element's TYPE_STRING_FLAG.

2018-08-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (*cbranch, *creturn): Name these patterns
	(they were unnamed before).  Fix comments.

2018-08-17  Nathan Sidwell  <nathan@acm.org>

	* cppbuiltin.c: Include "cpplib.h", not "cpp-id-data.h".

2018-08-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86841
	* wide-int-range.cc (wide_int_range_lshift): Use to_uhwi.

2018-08-17  Martin Liska  <mliska@suse.cz>

	* common.opt: Remove Warn, Init and Report for options with
	Ignore/Deprecated flag. Warning is done automatically for
	Deprecated flags.
	* config/i386/i386.opt: Likewise.
	* config/ia64/ia64.opt: Likewise.
	* config/rs6000/rs6000.opt: Likewise.
	* cppbuiltin.c (define_builtin_macros_for_compilation_flags):
	Remove usage of flag_check_pointer_bounds.
	* lto-wrapper.c (merge_and_complain): Do not handle
	OPT_fcheck_pointer_bounds.
	(append_compiler_options): Likewise.
	* opt-functions.awk: Do not handle Deprecated.
	* optc-gen.awk: Check that Var, Report and Init are not
	used for an option with Ignore/Deprecated flag.
	* opts-common.c (decode_cmdline_option): Do not report
	CL_ERR_DEPRECATED.
	(read_cmdline_option): Report warning for OPT_SPECIAL_deprecated
	options.
	* opts.h (struct cl_option): Remove cl_deprecated flag.
	(CL_ERR_DEPRECATED): Remove error enum value.

2018-08-17  Richard Biener  <rguenther@suse.de>

	PR middle-end/86505
	* tree-inline.c (copy_bb): When inlining __builtin_va_arg_pack_len ()
	across a va-arg-pack using call adjust its return value accordingly.

2018-08-16  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86853
	* gimple-ssa-sprintf.c (struct format_result): Rename member.
	(struct fmtresult): Add member and initialize it in ctors.
	(format_character): Handle %C.  Extend range to NUL.  Set MAYFAIL.
	(format_string): Handle %S the same as %ls.  Set MAYFAIL.
	(format_directive): Set POSUNDER4K when MAYFAIL is set.
	(parse_directive): Handle %C same as %c.
	(sprintf_dom_walker::compute_format_length): Adjust.
	(is_call_safe): Adjust.

2018-08-16  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* builtins.c (c_strlen): Add new parameter eltsize.  Use it
	for determining how to count the elements.
	* builtins.h (c_strlen): Adjust prototype.
	* expr.c (string_constant): Add new parameter mem_size.
	Set *mem_size appropriately.
	* expr.h (string_constant): Adjust protoype.
	* gimple-fold.c (get_range_strlen): Add new parameter eltsize.
	* gimple-fold.h (get_range_strlen): Adjust prototype.
	* gimple-ssa-sprintf.c (get_string_length): Add new parameter eltsize.
	(format_string): Call get_string_length with eltsize.

2018-08-16  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic.c (default_diagnostic_start_span_fn): Call pp_string
	to emit the span, rather than setting it as the prefix.

2018-08-16  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic-show-locus.c (layout::start_annotation_line): Add
	"margin_char" parameter, defaulting to space.  Use it in place
	of pp_space for the initial part of the margin.
	(layout::print_leading_fixits): Use '+' when filling the margin
	of line-insertion fix-it hints.

2018-08-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (two unnamed define_insn and define_split):
	Delete.

2018-08-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md: Don't set length attribute to the default
	value.
	* config/rs6000/darwin.md: Ditto.
	* config/rs6000/dfp.md: Ditto.
	* config/rs6000/htm.md: Ditto.
	* config/rs6000/rs6000.md: Ditto.
	* config/rs6000/sync.md: Ditto.
	* config/rs6000/vsx.md: Ditto.

2018-08-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md: Don't set length attribute to the default
	value, for branch instructions.
	* config/rs6000/darwin.md: Ditto.
	* config/rs6000/rs6000.md: Ditto.

2018-08-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (length): Always define as const_int 4.
	(unnamed conditional branch define_insn): Set length to 4 or 8
	depending on offset.
	(<bd>_<mode>): Similar, for alternative 0.
	(<bd>tf_<mode>): Ditto.

2018-08-16  Tamar Christina  <tamar.christina@arm.com>

	* expr.c (copy_blkmode_to_reg): Perform larger copies when safe.

2018-08-16  Matthew Malcomson  <matthew.malcomson@arm.com>

	* doc/rtl.texi: Replace old RTX class names with new names.


2018-08-16  Vlad Lazar  <vlad.lazar@arm.com>

	* expmed.h (canonicalize_comparison): New declaration.
	* expmed.c (canonicalize_comparison, equivalent_cmp_code): New function.
	* expmed.c (emit_store_flag_1): Add call to canonicalize_comparison.
	* optabs.c (prepare_cmp_insn): Likewise.
	* rtl.h (unsigned_condition_p): New function which checks if a
	comparison operator is unsigned.

2018-08-16  Nathan Sidwell  <nathan@acm.org>

	* config/rs6000/rs6000-c.c (rs6000_macro_to_expend): Use cpp_macro_p.
	* config/powerpcspc/powerpcspe-c.c (rs6000_macro_to_expend): Likewise.

2018-08-16  Tamar Christina  <tamar.christina@arm.com>

	PR target/84711
	* config/arm/arm.c (arm_can_change_mode_class): Disallow subreg.
	* config/arm/neon.md (movv4hf, movv8hf): Refactored to..
	(mov<mov>): ..this and enable unconditionally.

2018-08-16  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/neon.md (*neon_mov<mode>): Remove reg-to-reg alternative.

2018-08-16  Sam Tebbs  <sam.tebbs@arm.com>

	* config/aarch64/aarch64.opt (mlow-precision-recip-sqrt)
	(mlow-precision-sqrt, mlow-precision-div, mverbose-cost-dump): Replace
	"Common" with "Target".

2018-08-15  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.opt (mmitigate-rop): Mark as deprecated.
	* doc/invoke.texi (mmitigate-rop): Remove.
	* config/i386/i386.c: Do not include "regrename.h".
	(ix86_rop_should_change_byte_p, reg_encoded_number)
	(ix86_get_modrm_for_rop, set_rop_modrm_reg_bits, ix86_mitigate_rop):
	Remove.
	(ix86_reorg): Remove call to ix86_mitigate_rop.
	* config/i386/i386.md (attr "modrm_class"): Remove.
	(cmp<mode>_ccno_1, mov<mode>_xor, movstrict<mode>_xor)
	(x86_mov<mode>cc_0_m1. x86_mov<mode>cc_0_m1_se)
	(x86_mov<mode>cc_0_m1_neg): Remove modrm_class attribute override.

2018-08-15  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs600.c (rs6000_gimple_fold_builtin): Add entries to
	allow folding of mergeh() and mergel() for the float and double types.
	(fold_mergehl_helper): Rework to handle building a permute tree
	for float vectors.

2018-08-15  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (expand_vec_perm_movs): Enable V4SFmode
	for TARGET_SSE.

2018-08-15  David Malcolm  <dmalcolm@redhat.com>

	* common.opt (fdiagnostics-show-labels): New option.
	* diagnostic-show-locus.c (class layout_range): Add field
	"m_label".
	(class layout): Add field "m_show_labels_p".
	(layout_range::layout_range): Add param "label" and use it to
	initialize m_label.
	(make_range): Pass in NULL for new "label" param of layout_range's
	ctor.
	(layout::layout): Initialize m_show_labels_p.
	(layout::maybe_add_location_range): Pass in loc_range->m_label
	when constructing layout_range instances.
	(struct line_label): New struct.
	(layout::print_any_labels): New member function.
	(layout::print_line): Call it if label-printing is enabled.
	(selftest::test_one_liner_labels): New test.
	(selftest::test_diagnostic_show_locus_one_liner): Call it.
	* diagnostic.c (diagnostic_initialize): Initialize
	context->show_labels_p.
	* diagnostic.h (struct diagnostic_context): Add field
	"show_labels_p".
	* doc/invoke.texi (Diagnostic Message Formatting Options): Add
	-fno-diagnostics-show-labels.
	* dwarf2out.c (gen_producer_string): Add
	OPT_fdiagnostics_show_labels to the ignored options.
	* gcc-rich-location.c (gcc_rich_location::add_expr): Add "label"
	param.
	(gcc_rich_location::maybe_add_expr): Likewise.
	* gcc-rich-location.h (gcc_rich_location::gcc_rich_location): Add
	label" param, defaulting to NULL.
	(gcc_rich_location::add_expr): Add "label" param.
	(gcc_rich_location::maybe_add_expr): Likewise.
	(class text_range_label): New class.
	(class range_label_for_type_mismatch): New class.
	* gimple-ssa-sprintf.c (fmtwarn): Pass NULL for new label params
	of format_warning_va.
	(fmtwarn_n): Likewise for new params of format_warning_n_va.
	* lto-wrapper.c (merge_and_complain): Add
	OPT_fdiagnostics_show_labels to the "pick one setting" options.
	(append_compiler_options): Likewise to the dropped options.
	(append_diag_options): Likewise to the passed-on options.
	* opts.c (common_handle_option): Handle the new option.
	* selftest-diagnostic.c
	(test_diagnostic_context::test_diagnostic_context): Enable
	show_labels_p.
	* substring-locations.c: Include "gcc-rich-location.h".
	(format_warning_n_va): Add "fmt_label" and "param_label" params
	and use them as appropriate.
	(format_warning_va): Add "fmt_label" and "param_label" params,
	passing them on to format_warning_n_va.
	(format_warning_at_substring): Likewise.
	(format_warning_at_substring_n): Likewise.
	* substring-locations.h (format_warning_va): Add "fmt_label" and
	"param_label" params.
	(format_warning_n_va): Likewise.
	(format_warning_at_substring): Likewise.
	(format_warning_at_substring_n): Likewise.
	* toplev.c (general_init): Initialize global_dc->show_labels_p.

2018-08-15  Qing Zhao  <qing.zhao@oracle.com>

	PR testsuite/86519
	* builtins.c (expand_builtin_memcmp): Do not expand the call
	when overflow is detected.

2018-08-15  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/71625
	* config/aarch64/aarch64-builtins.c
	(aarch64_init_simd_builtin_types): Clear Poly8_t's TYPE_STRING_FLAG.

2018-08-15  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_reorg): Remove loop.

2018-08-15  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c
	 (darwin_function_switched_text_sections): Delete.
	* gcc/config/darwin.h
	 (TARGET_ASM_FUNCTION_SWITCHED_TEXT_SECTIONS): Likewise.

2018-08-15  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/81685
	* config/darwin.h: (DEBUG_STR_OFFSETS_SECTION, DEBUG_LOCLISTS_SECTION,
	DEBUG_RNGLISTS_SECTION) new macros.  (DEBUG_PUBNAMES_SECTION,
	DEBUG_PUBTYPES_SECTION) update to include GNU variant.

2018-08-15  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/86925
	* predict.c (expr_expected_value_1): When taking
	later predictor, assign also probability.
	Use fold_build2_initializer_loc in order to fold
	the expression in -frounding-math.

2018-08-14  Allan Sandfeld Jensen <allan.jensen@qt.io>

	* config/i386/i386.c (expand_vec_perm_movs): New method matching movs
	patterns.
	(expand_vec_perm_1): Try the new method.

2018-08-14  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/86547
	* lra-lives.c (remove_some_program_points_and_update_live_ranges):
	Check whether lra_live_max_point is 0 before dividing.

2018-08-14  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86650
	* tree-vrp.c (vrp_prop::check_array_ref): Print an inform message.
	(vrp_prop::check_mem_ref): Same.

2018-08-13  Liu Hao <lh_mouse@126.com>

	* pretty-print.c (eat_esc_sequence): Swap the foreground and
	background colors if the COMMON_LVB_REVERSE_VIDEO flag is set,
	and clear it thereafter, as it only works for DBCS.

2018-08-13  Liu Hao <lh_mouse@126.com>

	* pretty-print.c (mingw_ansi_fputs): Do not call _close() on the
	handle returned by _get_osf_handle().

2018-08-13  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* gcc/config/rs6000/rs6000.c (rs6000_gimple_fold_builtin): Add support
	for folding vec_perm.

2018-08-13  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_gimple_fold_builtin):
	Add support for gimple-folding of vec_pack() and vec_unpack()
	intrinsics.

2018-08-13  Will Schmidt <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_builtin_valid_without_lhs): Add
	vec_xst variants to the list.
	(rs6000_gimple_fold_builtin): Add support for folding unaligned
	vector loads and stores.

2018-08-13  David Edelsohn  <dje.gcc@gmail.com>

	* config.gcc (rs6000-ibm-aix4.x): Delete.
	(rs6000-ibm-aix5.1): Delete.
	(rs6000-ibm-aix5.2): Delete.
	(rs6000-ibm-aix5.3): Delete.
	* config/rs6000/aix43.h: Delete.
	* config/rs6000/aix51.h: Delete.
	* config/rs6000/aix52.h: Delete.
	* config/rs6000/t-aix43: Delete.

2018-08-13  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_decompose_constant_pool_ref):
	New function.
	(s390_decompose_address): Factor out constant pool ref
	decomposition.

2018-08-12  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-predicates.c
	(nds32_can_use_bclr_p): Change return type as bool.
	(nds32_can_use_bset_p): Ditto.
	(nds32_can_use_btgl_p): Ditto.
	(nds32_can_use_bitci_p): Ditto.
	* config/nds32/nds32-protos.h
	(nds32_can_use_bclr_p): Change declaration.
	(nds32_can_use_bset_p): Ditto.
	(nds32_can_use_btgl_p): Ditto.
	(nds32_can_use_bitci_p): Ditto.

2018-08-12  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_expand_prologue, nds32_expand_epilogue):
	Support -msched-prolog-epilog option.
	* config/nds32/nds32.opt (msched-prolog-epilog): New option.

2018-08-12  Chung-Ju Wu  <jasonwucj@gmail.com>

	* common/config/nds32/nds32-common.c
	(nds32_option_optimization_table): Enalbe -malways-align.

2018-08-12  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*): Add nds32_isr.h and nds32_init.inc in
	extra_headers.
	* common/config/nds32/nds32-common.c (nds32_handle_option): Handle
	OPT_misr_secure_ case.
	* config/nds32/nds32-isr.c: Implementation of backward compatibility.
	* config/nds32/nds32-protos.h (nds32_isr_function_critical_p): New.
	* config/nds32/nds32.c (nds32_attribute_table): Add critical and
	secure attribute.
	* config/nds32/nds32.h (nds32_isr_nested_type): Add NDS32_CRITICAL.
	(nds32_isr_info): New field security_level.
	(TARGET_ISR_VECTOR_SIZE_4_BYTE): New macro.
	* config/nds32/nds32.md (return_internal): Consider critical attribute.
	* config/nds32/nds32.opt (misr-secure): New option.
	* config/nds32/nds32_init.inc: New file.
	* config/nds32/nds32_isr.h: New file.

2018-08-11  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.md (UNSPEC_MEMORY_BARRIER): New unspec enum.
	Update comment for atomic instructions.
	(atomic_storeqi, atomic_storehi, atomic_storesi, atomic_storesf,
	atomic_loaddf, atomic_loaddf_1, atomic_storedf, atomic_storedf_1):
	Remove.
	(atomic_loaddi): Revise fence expansion to only emit fence prior to
	load for __ATOMIC_SEQ_CST model.
	(atomic_loaddi_1): Remove float register target.
	(atomic_storedi): Handle CONST_INT values.
	(atomic_storedi_1): Remove float register source.  Add special case
	for zero value.
	(memory_barrier): New expander and insn.

2018-08-11  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/86835
	* tree-ssa-math-opts.c (insert_reciprocals): Even when inserting
	new_stmt after def_gsi, make sure to insert new_square_stmt after
	that stmt, not 2 stmts before it.

2018-08-10  Alexander Monakov  <amonakov@ispras.ru>

	PR target/82418
	* config/i386/i386.md (<s>mul<mode>3_highpart): Use DWIH mode iterator
	instead of SWI48.

2018-08-10  Martin Liska  <mliska@suse.cz>

	PR target/83610
	* builtin-types.def (BT_FN_LONG_LONG_LONG_DOUBLE): Add new
	function type.
	* builtins.c (expand_builtin_expect_with_probability):
	New function.
	(expand_builtin_expect_with_probability): New function.
	(build_builtin_expect_predicate): Add new argumnet probability
	for BUILT_IN_EXPECT_WITH_PROBABILITY.
	(fold_builtin_expect):
	(fold_builtin_2):
	(fold_builtin_3):
	* builtins.def (BUILT_IN_EXPECT_WITH_PROBABILITY):
	* builtins.h (fold_builtin_expect): Set new argument.
	* doc/extend.texi: Document __builtin_expect_with_probability.
	* doc/invoke.texi: Likewise.
	* gimple-fold.c (gimple_fold_call): Pass new argument.
	* ipa-fnsummary.c (find_foldable_builtin_expect): Handle
	also BUILT_IN_EXPECT_WITH_PROBABILITY.
	* predict.c (get_predictor_value): New function.
	(expr_expected_value): Add new argument probability. Assume
	that predictor and probability are always non-null.
	(expr_expected_value_1): Likewise.  For __builtin_expect and
	__builtin_expect_with_probability set probability.  Handle
	combination in binary expressions.
	(tree_predict_by_opcode): Simplify code by simply calling
	get_predictor_value.
	(pass_strip_predict_hints::execute): Add handling of
	BUILT_IN_EXPECT_WITH_PROBABILITY.
	* predict.def (PRED_BUILTIN_EXPECT_WITH_PROBABILITY): Add
	new predictor.
	* tree.h (DECL_BUILT_IN_P): New function.

2018-08-10  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/85799
	* passes.def: Add argument for pass_strip_predict_hints.
	* predict.c (class pass_strip_predict_hints): Add new argument
	early_p.
	(strip_predictor_early): New function.
	(pass_strip_predict_hints::execute): Call the function to
	strip predictors.
	(strip_predict_hints): New function.
	* predict.def: Fix comment.

2018-08-10  Thomas Preud'homme  <thomas.preudhomme@linaro.org>

	* Makefile.in: Clarify which tm.texi to copy over to assert the
	right to grant a GFDL license for all.

2018-08-09  Jeff Law  <law@redhat.com>

	* config/m68k/m68k.c (m68k_adjust_decorated_operand): Remove
	unused variable.

2018-08-09  Andreas Schwab  <schwab@linux-m68k.org>

	* config/m68k/m68k-protos.h (m68k_final_prescan_insn): Remove
	prototype.

2018-08-09  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vectorizable_reduction): Allow inner-loop
	reductions for variable-length vectors.

2018-08-09  David Malcolm  <dmalcolm@redhat.com>

	PR other/84889
	* common.opt (fdiagnostics-show-line-numbers): New option.
	* diagnostic-show-locus.c (class layout): Add fields
	"m_show_line_numbers_p" and "m_linenum_width";
	(num_digits): New function.
	(test_num_digits): New function.
	(layout::layout): Initialize new fields.  Update m_x_offset
	logic to handle any left margin.
	(layout::print_source_line): Print line number when requested.
	(layout::start_annotation_line): New member function.
	(layout::print_annotation_line): Call it.
	(layout::print_leading_fixits): Likewise.
	(layout::print_trailing_fixits): Likewise.  Update calls to
	move_to_column for new parameter.
	(layout::get_x_bound_for_row): Add "add_left_margin" param and use
	it to potentially call start_annotation_line.
	(layout::show_ruler): Call start_annotation_line.
	(selftest::test_line_numbers_multiline_range): New selftest.
	(selftest::diagnostic_show_locus_c_tests): Call test_num_digits
	and selftest::test_line_numbers_multiline_range.
	* diagnostic.c (diagnostic_initialize): Initialize
	show_line_numbers_p.
	* diagnostic.h (struct diagnostic_context): Add field
	"show_line_numbers_p".
	* doc/invoke.texi (Diagnostic Message Formatting Options): Add
	-fno-diagnostics-show-line-numbers.
	* dwarf2out.c (gen_producer_string): Add
	OPT_fdiagnostics_show_line_numbers to the ignored options.
	* lto-wrapper.c (merge_and_complain): Likewise to the "pick
	one setting" options.
	(append_compiler_options): Likewise to the dropped options.
	(append_diag_options): Likewise to the passed-on options.
	* opts.c (common_handle_option): Handle the new option.
	* toplev.c (general_init): Set up global_dc->show_line_numbers_p.

2018-08-09  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* doc/extend.texi (PowerPC AltiVec Built-in Functions Available on
	ISA 2.07): Correct spelling of bcdsub to be __builtin_bcdsub.  Add
	third argument of type "const signed char" to descriptions of
	__builtin_bcdadd, __builtin_bcdadd_lt, __builtin_bcdadd_eq,
	__builtin_bcdadd_gt, __builtin_bcdadd_ov, __builtin_bcdsub,
	__builtin_bcdsub_lt, __builtin_bcdsub_eq, __builtin_bcdsub_gt,
	__builtin_bcdsub_ov functions.

2018-08-09  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86858
	* tree-vect-loop.c (vect_is_simple_reduction): Restore
	flow_bb_inside_loop_p calls.

2018-08-09  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86871
	* tree-vect-stmts.c (vect_transform_stmt): Use gimple_get_lhs
	instead of gimple_assign_lhs.

2018-08-09  Richard Earnshaw  <rearnsha@arm.com>

	PR target/86887
	* config/aarch64/aarch64.md (add<mode>3_carryinC_zero): Add missing
	register constraint to operand 0.
	(add<mode>3_carryinC): Likewise.
	(add<mode>3_carryinV_zero, add<mode>3_carryinV): Likewise.

2018-08-09  Martin Liska  <mliska@suse.cz>

	PR c/86895
	* common.opt: Remove extra line.

2018-08-09  Martin Liska  <mliska@suse.cz>

	* params.def (PARAM_ALIGN_LOOP_ITERATIONS): Remove double dots
	at the end of a line, make first letter capital and end up
	a sentence with a dot.
	(PARAM_LOOP_INTERCHANGE_STRIDE_RATIO): Likewise.
	(PARAM_LOOP_BLOCK_TILE_SIZE): Likewise.
	(PARAM_GRAPHITE_MAX_NB_SCOP_PARAMS): Likewise.
	(PARAM_GRAPHITE_MAX_ARRAYS_PER_SCOP): Likewise.
	(PARAM_MAX_ISL_OPERATIONS): Likewise.
	(PARAM_GRAPHITE_ALLOW_CODEGEN_ERRORS): Likewise.
	(PARAM_PROFILE_FUNC_INTERNAL_ID): Likewise.
	(PARAM_INDIR_CALL_TOPN_PROFILE): Likewise.
	(PARAM_SLP_MAX_INSNS_IN_BB): Likewise.
	(PARAM_IPA_CP_EVAL_THRESHOLD): Likewise.
	(PARAM_IPA_CP_RECURSION_PENALTY): Likewise.
	(PARAM_IPA_CP_SINGLE_CALL_PENALTY): Likewise.
	(PARAM_IPA_CP_LOOP_HINT_BONUS): Likewise.
	(PARAM_IPA_CP_ARRAY_INDEX_HINT_BONUS): Likewise.
	(PARAM_TREE_REASSOC_WIDTH): Likewise.
	(PARAM_HSA_GEN_DEBUG_STORES): Likewise.
	(PARAM_MAX_SPECULATIVE_DEVIRT_MAYDEFS): Likewise.
	(PARAM_MAX_VRP_SWITCH_ASSERTIONS): Likewise.

2018-08-09  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/84332
	* config/s390/s390.c (s390_option_override_internal): Reduce the
	stack-clash-protection-probe-interval param if it would be too big
	for z900.

2018-08-08  Andreas Schwab  <schwab@linux-m68k.org>

	PR target/46179
	* config/m68k/m68k.h (FINAL_PRESCAN_INSN): Don't define.
	* config/m68k/m68k.c (handle_move_double): Don't call
	m68k_final_prescan_insn.
	(m68k_adjust_decorated_operand): Renamed from
	m68k_final_prescan_insn, remove first and third operand and
	simplify.
	(print_operand): Call it.
	(print_operand_address): Call it.

2018-08-08  Nathan Sidwell  <nathan@acm.org>

	* diagnostic.c (diagnostic_report_current_module): Use
	linemap_included_from & linemap_included_from_linemap.

2018-08-08  Hongbo Zhang  <hongbo.zhang@linaro.org>

	* config/aarch64/aarch64-cores.def: Add phecda core.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi: Add phecda core.

2018-08-08  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/85295
	* config/s390/constraints.md ("NxHD0", "NxSD0"): New constraint
	definitions.
	* config/s390/s390.md ("movti"): Add more alternatives for
	constant to GPR copies.

2018-08-08  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c: Fix whitespace damage throughout the file.
	* config/s390/s390.h: Likewise.
	* config/s390/tpf.h: Likewise.

2018-08-08  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_loadrelative_operand_p):
	Remove TARGET_CPU_ZARCH usages.
	(s390_rtx_costs): Likewise.
	(s390_legitimate_constant_p): Likewise.
	(s390_cannot_force_const_mem): Likewise.
	(legitimate_reload_constant_p): Likewise.
	(s390_preferred_reload_class): Likewise.
	(legitimize_pic_address): Likewise.
	(legitimize_tls_address): Likewise.
	(s390_split_branches): Removed.
	(s390_add_execute): Removed.
	(s390_dump_pool): Remove TARGET_CPU_ZARCH usages.
	(s390_mainpool_start): Likewise.
	(s390_mainpool_finish): Likewise.
	(s390_mainpool_cancel): Removed.
	(s390_chunkify_start): Remove TARGET_CPU_ZARCH usages.
	(s390_chunkify_cancel): Likewise.
	(s390_return_addr_rtx): Likewise.
	(s390_register_info): Remove split_branches_pending_p uages.
	(s390_optimize_register_info): Likewise.
	(s390_init_frame_layout): Remove TARGET_CPU_ZARCH and
	split_branches_pending_p usages.
	(s390_can_eliminate): Remove TARGET_CPU_ZARCH usages.
	(s390_load_got): Likewise.
	(s390_expand_split_stack_prologue): Likewise.
	(output_asm_nops): Likewise.
	(s390_function_profiler): Likewise.
	(s390_emit_call): Likewise.
	(s390_conditional_register_usage): Likewise.
	(s390_optimize_prologue): Likewise.
	(s390_reorg): Remove TARGET_CPU_ZARCH and
	split_branches_pending_p usages.
	(s390_option_override_internal): Remove TARGET_CPU_ZARCH
	usages.
	(s390_output_indirect_thunk_function): Likewise.
	* config/s390/s390.h (TARGET_CPU_ZARCH): Removed.
	(TARGET_CPU_ZARCH_P): Removed.
	(struct machine_function): Remove split_branches_pending_p.
	* config/s390/s390.md: Remove TARGET_CPU_ZARCH usages.

2018-08-08  Ilya Leoshkevich  <iii@linux.ibm.com>

	* common/config/s390/s390-common.c (processor_flags_table):
	Remove flags.
	* config.gcc: Remove with_arch/with_tune support.
	* config/s390/2064.md: Remove cpu attribute comparisons.
	* config/s390/driver-native.c (s390_host_detect_local_cpu):
	Remove MTN.
	* config/s390/linux.h (ASM_SPEC):
	Remove -march support.
	* config/s390/s390-c.c (s390_cpu_cpp_builtins_internal):
	Use a table to get an arch level.
	* config/s390/s390-opts.h (enum processor_type):
	Remove enum values.
	* config/s390/s390.c
	(processor_table): Remove entries, add arch_level values.
	(s390_issue_rate): Remove cases.
	(s390_option_override): Adjust
	s390_option_override_internal() call.
	(s390_option_override_internal): Remove deprecation warning.
	(s390_valid_target_attribute_tree): Adjust
	s390_option_override_internal() call.
	* config/s390/s390.h (struct s390_processor):
	Share with s390-c.c, add arch_level field.
	* config/s390/s390.md:
	Remove occurrences in cpu attribute.
	* config/s390/s390.opt: Remove -march/-mtune support.
	* config/s390/tpf.h (ASM_SPEC): Remove -march support.
	* doc/invoke.texi: Remove deprecation warning.

2018-08-08  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64.c (qdf24xx_vector_cost): New static
	global.
	(qdf24xx_tunings): Set vector cost structure to
	qdf24xx_vector_cost.

	* config/aarch64/aarch64.c (qdf24xx_addrcost_table)
	<register_sextend>: Set to 3.

2018-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/86838
	* config/aarch64/iterators.md (FRECP, frecp_suffix): Delete.
	* config/aarch64/aarch64-simd.md
	(aarch64_frecp<FRECP:frecp_suffix><mode>): Fold FRECPE into...
	(@aarch64_frecpe<mode>): ...here and the move FRECPX to...
	(aarch64_frecpx<mode>): ...this new pattern.
	* config/aarch64/aarch64-simd-builtins.def: Remove comment
	about aarch64_frecp<FRECP:frecp_suffix><mode>.

2018-08-07  Martin Liska  <mliska@suse.cz>

	PR middle-end/83023
	* predict.c (expr_expected_value_1): Handle DECL_IS_MALLOC,
	BUILT_IN_REALLOC and DECL_IS_OPERATOR_NEW.
	* predict.def (PRED_MALLOC_NONNULL): New predictor.
	* doc/extend.texi: Document that malloc attribute adds
	hit to compiler.

2018-08-06  John David Anglin  <danglin@gcc.gnu.org>

	PR target/86785
	* config/pa/pa.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

2018-08-06  Jeff Law  <law@redhat.com>

	* tree-ssa-dom.c (dom_opt_dom_walker::optimize_stmt): Pass down
	the vr_values instance to cprop_into_stmt.
	(cprop_into_stmt): Pass vr_values instance down to cprop_operand.
	(cprop_operand): Also query EVRP to determine if OP is a constant.

2018-08-06  Nathan Sidwell  <nathan@acm.org>

	* diagnostic.c (diagnostic_report_current_module): Reroll
	included-at loop.  Translate text.

2018-08-06  David Malcolm  <dmalcolm@redhat.com>

	* function-tests.c (selftest::test_expansion_to_rtl): Call
	free_after_compilation.

2018-08-06  Alan Hayward  <alan.hayward@arm.com>

	* config/aarch64/aarch64.md: Add clobber highs to tls_desc.

2018-08-06  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_loop_unroll_adjust): Prevent small
	loops with memory block operations from getting unrolled.

2018-08-06  Ulrich Weigand  <uweigand@de.ibm.com>

	PR target/86807
	* config/spu/spu.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

2018-08-06  Jeff Law  <law@redhat.com>

	* reload1.c (forget_old_reloads_1): Adjust CLOBBER_HIGH
	assert.

2018-08-06  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	PR target/86662
	* gcc/tree.c (build_common_tree_nodes): Initialize integer_types array
	with all enabled __intN types.

	* gcc/testsuite/gcc.target/msp430/pr86662.c: New test.

2018-08-06  Alan Hayward  <alan.hayward@arm.com>

	* alias.c (record_set): Check for clobber high.
	* cfgexpand.c (expand_gimple_stmt): Likewise.
	* combine-stack-adj.c (single_set_for_csa): Likewise.
	* combine.c (find_single_use_1): Likewise.
	(set_nonzero_bits_and_sign_copies): Likewise.
	(get_combine_src_dest): Likewise.
	(is_parallel_of_n_reg_sets): Likewise.
	(try_combine): Likewise.
	(record_dead_and_set_regs_1): Likewise.
	(reg_dead_at_p_1): Likewise.
	(reg_dead_at_p): Likewise.
	* dce.c (deletable_insn_p): Likewise.
	(mark_nonreg_stores_1): Likewise.
	(mark_nonreg_stores_2): Likewise.
	* df-scan.c (df_find_hard_reg_defs): Likewise.
	(df_uses_record): Likewise.
	(df_get_call_refs): Likewise.
	* dwarf2out.c (mem_loc_descriptor): Likewise.
	* haifa-sched.c (haifa_classify_rtx): Likewise.
	* ira-build.c (create_insn_allocnos): Likewise.
	* ira-costs.c (scan_one_insn): Likewise.
	* ira.c (equiv_init_movable_p): Likewise.
	(rtx_moveable_p): Likewise.
	(interesting_dest_for_shprep): Likewise.
	* jump.c (mark_jump_label_1): Likewise.
	* postreload-gcse.c (record_opr_changes): Likewise.
	* postreload.c (reload_cse_simplify): Likewise.
	(struct reg_use): Add source expr.
	(reload_combine): Check for clobber high.
	(reload_combine_note_use): Likewise.
	(reload_cse_move2add): Likewise.
	(move2add_note_store): Likewise.
	* print-rtl.c (print_pattern): Likewise.
	* recog.c (decode_asm_operands): Likewise.
	(store_data_bypass_p): Likewise.
	(if_test_bypass_p): Likewise.
	* regcprop.c (kill_clobbered_value): Likewise.
	(kill_set_value): Likewise.
	* reginfo.c (reg_scan_mark_refs): Likewise.
	* reload1.c (maybe_fix_stack_asms): Likewise.
	(eliminate_regs_1): Likewise.
	(elimination_effects): Likewise.
	(mark_not_eliminable): Likewise.
	(scan_paradoxical_subregs): Likewise.
	(forget_old_reloads_1): Likewise.
	* reorg.c (find_end_label): Likewise.
	(try_merge_delay_insns): Likewise.
	(redundant_insn): Likewise.
	(own_thread_p): Likewise.
	(fill_simple_delay_slots): Likewise.
	(fill_slots_from_thread): Likewise.
	(dbr_schedule): Likewise.
	* resource.c (update_live_status): Likewise.
	(mark_referenced_resources): Likewise.
	(mark_set_resources): Likewise.
	* rtl.c (copy_rtx): Likewise.
	* rtlanal.c (reg_referenced_p): Likewise.
	(single_set_2): Likewise.
	(noop_move_p): Likewise.
	(note_stores): Likewise.
	* sched-deps.c (sched_analyze_reg): Likewise.
	(sched_analyze_insn): Likewise.

2018-08-06  Alan Hayward  <alan.hayward@arm.com>

	* cse.c (invalidate_reg): New function extracted from...
	(invalidate): ...here.
	(canonicalize_insn): Check for clobber high.
	(invalidate_from_clobbers): invalidate clobber highs.
	(invalidate_from_sets_and_clobbers): Likewise.
	(count_reg_usage): Check for clobber high.
	(insn_live_p): Likewise.
	* cselib.c (cselib_expand_value_rtx_1):Likewise.
	(cselib_invalidate_regno): Check for clobber in setter.
	(cselib_invalidate_rtx): Pass through setter.
	(cselib_invalidate_rtx_note_stores):
	(cselib_process_insn): Check for clobber high.
	* cselib.h (cselib_invalidate_rtx): Add operand.

2018-08-06  Alan Hayward  <alan.hayward@arm.com>

	* lra-eliminations.c (lra_eliminate_regs_1): Check for clobber high.
	(mark_not_eliminable): Likewise.
	* lra-int.h (struct lra_insn_reg): Add clobber high marker.
	* lra-lives.c (process_bb_lives): Check for clobber high.
	* lra.c (new_insn_reg): Remember clobber highs.
	(collect_non_operand_hard_regs): Check for clobber high.
	(lra_set_insn_recog_data): Likewise.
	(add_regs_to_insn_regno_info): Likewise.
	(lra_update_insn_regno_info): Likewise.

2018-08-06  Alan Hayward  <alan.hayward@arm.com>

	* rtl.h (reg_is_clobbered_by_clobber_high): Add declarations.
	* rtlanal.c (reg_is_clobbered_by_clobber_high): Add function.

2018-08-06  Alan Hayward  <alan.hayward@arm.com>

	* emit-rtl.c (verify_rtx_sharing): Check for CLOBBER_HIGH.
	(copy_insn_1): Likewise.
	(gen_hard_reg_clobber_high): New gen function.
	* genconfig.c (walk_insn_part): Check for CLOBBER_HIGH.
	* genemit.c (gen_exp): Likewise.
	(gen_emit_seq): Pass through info.
	(gen_insn): Check for CLOBBER_HIGH.
	(gen_expand): Pass through info.
	(gen_split): Likewise.
	(output_add_clobbers): Likewise.
	* genrecog.c (validate_pattern): Check for CLOBBER_HIGH.
	(remove_clobbers): Likewise.
	* rtl.h (gen_hard_reg_clobber_high): New declaration.

2018-08-06  Alan Hayward  <alan.hayward@arm.com>

	* doc/rtl.texi (clobber_high): Add.
	(parallel): Add in clobber high
	* rtl.c (rtl_check_failed_code3): Add function.
	* rtl.def (CLOBBER_HIGH): Add expression.
	* rtl.h (RTL_CHECKC3): Add macro.
	(rtl_check_failed_code3): Add declaration.
	(XC3EXP): Add macro.

2018-08-05  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/86386
	* config/i386/i386.c (ix86_finalize_stack_frame_flags): Set
	cfun->machine->max_used_stack_alignment if needed.

2018-08-04  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86571
	* gimple-ssa-sprintf.c (format_floating): Extend upper bound of
	NaN output to 4.

2018-08-03  Sandra Loosemore  <sandra@codesourcery.com>

	PR target/86799
	* config/nios2/nios2.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define.

2018-08-03  Jeff Law  <law@redhat.com>

	PR target/86795
	* config/mn10300/mn10300.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

2018-08-03  David Malcolm  <dmalcolm@redhat.com>

	* doc/gcov.texi (-x): Remove duplicate "to".
	* doc/invoke.texi (-Wnoexcept-type): Remove duplicate "calls".
	(-Wif-not-aligned): Remove duplicate "is".
	(-flto): Remove duplicate "the".
	(MicroBlaze Options): In examples of "-mcpu=cpu-type", remove
	duplicate "v5.00.b".
	(MSP430 Options): Remove duplicate "and" from the description
	of "-mgprel-sec=regexp".
	(x86 Options): Remove duplicate copies of "vmldLog102" and
	vmlsLog104 from description of "-mveclibabi=type".

2018-08-03  Richard Sandiford  <richard.sandiford@arm.com>

	* internal-fn.h (first_commutative_argument): Declare.
	* internal-fn.c (first_commutative_argument): New function.
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Remove extra
	restrictions for pattern statements.  Use first_commutative_argument
	to look for commutative operands in calls to internal functions.

2018-08-03  Aldy Hernandez  <aldyh@redhat.com>

	* Makefile.in (wide-int-range.o): New.
	* tree-vrp.c: Move all the wide_int_* functions to...
	* wide-int-range.cc: ...here.
	* tree-vrp.h: Move all the wide_int_* prototypes to...
	* wide-int-range.h: ...here.

2018-08-03  Tom de Vries  <tdevries@suse.de>

	* common/config/nvptx/nvptx-common.c (nvptx_except_unwind_info): Return
	UI_NONE.
	* config/nvptx/nvptx.c (TARGET_ASM_BYTE_OP): Remove define.
	* except.c (output_function_exception_table): Do early exit if
	targetm_common.except_unwind_info (&global_options) == UI_NONE.

2018-08-03  Martin Liska  <mliska@suse.cz>

	* predict.c (dump_prediction): Change to 2 digits
	in fraction part.

2018-08-03  Siddhesh Poyarekar  <siddhesh@sourceware.org>

	* config/aarch64/falkor.md (falkor_am_1_vxvy_vxvy): Move
	neon_dup_q to...
	(falkor_am_1_gtov_gtov): ... a new insn reservation.

2018-07-19  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/nds32/nds32.c (nds32_hard_regno_mode_ok): Replace > with >=.
	* df-problems.c (df_remove_dead_eq_notes): Replace > with >=.
	* dwarf2out.c (mem_loc_descriptor): Replace > with >=.
	* lra-constraints.c (spill_hard_reg_in_range): Replace <= with <.
	* lra-remat.c (call_used_input_regno_present_p): Replace <= with <.

2018-08-02  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic-show-locus.c (diagnostic_show_locus): Use
	pp_take_prefix when saving the existing prefix.
	* diagnostic.c (diagnostic_append_note): Likewise.
	* langhooks.c (lhd_print_error_function): Likewise.
	* pretty-print.c (pp_set_prefix): Drop the "const" from "prefix"
	param's type.  Free the existing prefix.
	(pp_take_prefix): New function.
	(pretty_printer::pretty_printer): Drop the prefix parameter.
	Rename the length parameter to match the comment.
	(pretty_printer::~pretty_printer): Free the prefix.
	* pretty-print.h (pretty_printer::pretty_printer): Drop the prefix
	parameter.
	(struct pretty_printer): Drop the "const" from "prefix" field's
	type and clarify memory management.
	(pp_set_prefix): Drop the "const" from the 2nd param.
	(pp_take_prefix): New decl.

2018-08-02  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (select_block_compare_mode): Move test
	for word_mode_ok here instead of passing as argument.
	(expand_block_compare): Change select_block_compare_mode() call.
	(expand_strncmp_gpr_sequence): New function.
	(expand_strn_compare): Make use of expand_strncmp_gpr_sequence.

2018-08-02  Jeff Law  <law@redhat.com>

	PR target/86790
	* config/m68k/m68k.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

	PR target/86784
	* config/h8300/h8300.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

2018-08-02  Tom de Vries  <tdevries@suse.de>

	PR target/86660
	* common/config/nvptx/nvptx-common.c (nvptx_except_unwind_info): New
	function.  Return UI_TARGET unconditionally.
	(TARGET_EXCEPT_UNWIND_INFO): Redefine to nvptx_except_unwind_info.
	* config/nvptx/nvptx.c (TARGET_ASM_BYTE_OP): Emit commented out '.byte'.

2018-08-02  Richard Sandiford  <richard.sandiford@arm.com>

	* genemit.c (print_overload_test): Fix typo.

2018-08-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86816
	* tree-ssa-tail-merge.c (tail_merge_valueize): New function
	which checks for value availability before querying it.
	(gvn_uses_equal): Use it.
	(same_succ_hash): Likewise.
	(gimple_equal_p): Likewise.

2018-08-02  Nick Clifton  <nickc@redhat.com>

	PR target/86813
	* config/stormy16/stormy16.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

	PR target/86810
	* config/v850/v850.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

	PR target/86810
	* config/v850/v850.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

	PR target/86803
	* config/rx/rx.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

	PR target/86797
	* config/msp430/msp430.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

	PR target/86791
	* config/mcore/mcore.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

	PR target/86789
	* config/m32r/m32r.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

	PR target/86787
	* config/iq2000/iq2000.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

	PR target/86782
	* config/frv/frv.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define to
	speculation_safe_value_not_needed.

	PR target/86781
	* config/fr30/fr30.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define
	to speculation_safe_value_not_needed.

2018-08-02  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/md.texi: Expand the documentation of instruction names
	to mention port-local uses.  Document '@' in pattern names.
	* read-md.h (overloaded_instance, overloaded_name): New structs.
	(mapping): Declare.
	(md_reader::handle_overloaded_name): New member function.
	(md_reader::get_overloads): Likewise.
	(md_reader::m_first_overload): New member variable.
	(md_reader::m_next_overload_ptr): Likewise.
	(md_reader::m_overloads_htab): Likewise.
	* read-md.c (md_reader::md_reader): Initialize m_first_overload,
	m_next_overload_ptr and m_overloads_htab.
	* read-rtl.c (iterator_group): Add "type" and "get_c_token" fields.
	(get_mode_token, get_code_token, get_int_token): New functions.
	(map_attr_string): Add an optional argument that passes back
	the associated iterator.
	(overloaded_name_hash, overloaded_name_eq_p, named_rtx_p):
	(md_reader::handle_overloaded_name, add_overload_instance): New
	functions.
	(apply_iterators): Handle '@' names.  Report an error if '@'
	is used without iterators.
	(initialize_iterators): Initialize the new iterator_group fields.
	* genopinit.c (handle_overloaded_code_for)
	(handle_overloaded_gen): New functions.
	(main): Use them to print declarations of maybe_code_for_* and
	maybe_gen_* functions, and inline definitions of code_for_* and gen_*.
	* genemit.c (print_overload_arguments, print_overload_test)
	(handle_overloaded_code_for, handle_overloaded_gen): New functions.
	(main): Use it to print definitions of maybe_code_for_* and
	maybe_gen_* functions.
	* config/aarch64/aarch64.c (aarch64_split_128bit_move): Use
	gen_aarch64_mov{low,high}_di and gen_aarch64_movdi_{low,high}
	instead of explicit mode checks.
	(aarch64_split_simd_combine): Likewise gen_aarch64_simd_combine.
	(aarch64_split_simd_move): Likewise gen_aarch64_split_simd_mov.
	(aarch64_emit_load_exclusive): Likewise gen_aarch64_load_exclusive.
	(aarch64_emit_store_exclusive): Likewise gen_aarch64_store_exclusive.
	(aarch64_expand_compare_and_swap): Likewise
	gen_aarch64_compare_and_swap and gen_aarch64_compare_and_swap_lse
	(aarch64_gen_atomic_cas): Likewise gen_aarch64_atomic_cas.
	(aarch64_emit_atomic_swap): Likewise gen_aarch64_atomic_swp.
	(aarch64_constant_pool_reload_icode): Delete.
	(aarch64_secondary_reload): Use code_for_aarch64_reload_movcp
	instead of aarch64_constant_pool_reload_icode.  Use
	code_for_aarch64_reload_mov instead of explicit mode checks.
	(rsqrte_type, get_rsqrte_type, rsqrts_type, get_rsqrts_type): Delete.
	(aarch64_emit_approx_sqrt): Use gen_aarch64_rsqrte instead of
	get_rsqrte_type and gen_aarch64_rsqrts instead of gen_rqrts_type.
	(recpe_type, get_recpe_type, recps_type, get_recps_type): Delete.
	(aarch64_emit_approx_div): Use gen_aarch64_frecpe instead of
	get_recpe_type and gen_aarch64_frecps instead of get_recps_type.
	(aarch64_atomic_load_op_code): Delete.
	(aarch64_emit_atomic_load_op): Likewise.
	(aarch64_gen_atomic_ldop): Use UNSPECV_ATOMIC_* instead of
	aarch64_atomic_load_op_code.  Use gen_aarch64_atomic_load
	instead of aarch64_emit_atomic_load_op.
	* config/aarch64/aarch64.md (aarch64_reload_movcp<GPF_TF:mode><P:mode>)
	(aarch64_reload_movcp<VALL:mode><P:mode>, aarch64_reload_mov<mode>)
	(aarch64_movdi_<mode>low, aarch64_movdi_<mode>high)
	(aarch64_mov<mode>high_di, aarch64_mov<mode>low_di): Add a '@'
	character before the pattern name.
	* config/aarch64/aarch64-simd.md (aarch64_split_simd_mov<mode>)
	(aarch64_rsqrte<mode>, aarch64_rsqrts<mode>)
	(aarch64_simd_combine<mode>, aarch64_frecpe<mode>)
	(aarch64_frecps<mode>): Likewise.
	* config/aarch64/atomics.md (atomic_compare_and_swap<mode>)
	(aarch64_compare_and_swap<mode>, aarch64_compare_and_swap<mode>_lse)
	(aarch64_load_exclusive<mode>, aarch64_store_exclusive<mode>)
	(aarch64_atomic_swp<mode>, aarch64_atomic_cas<mode>)
	(aarch64_atomic_load<atomic_ldop><mode>): Likewise.

2018-08-02  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_float_const_representable_p):
	Allow HFmode constants if TARGET_FP_F16INST.

2018-08-02  Jackson Woodruff  <jackson.woodruff@arm.com>

	PR target/86014
	* config/aarch64/aarch64.c (aarch64_operands_adjust_ok_for_ldpstp):
	No longer check last store for clobber of address register.

2018-08-02  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/86817
	* gcov.c (process_all_functions): New function.
	(main): Call it.
	(process_file): Move functions processing to
	process_all_functions.

2018-08-02  David Malcolm  <dmalcolm@redhat.com>

	* dumpfile.c (dump_user_location_t::dump_user_location_t): Add
	"const" to the "gimple *" and "rtx_insn *" parameters.
	* dumpfile.h (dump_user_location_t::dump_user_location_t):
	Likewise.
	(dump_location_t::dump_location_t): Likewise.

2018-08-01  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86650
	* gimple-pretty-print.c (percent_G_format): Accept a "gimple *"
	rather than a "gcall *".  Directly pass the data of interest
	to percent_K_format, rather than building a temporary CALL_EXPR
	to hold it.
	* gimple-fold.c (gimple_fold_builtin_strncpy): Adjust.
	(gimple_fold_builtin_strncat): Adjust.
	* gimple-ssa-warn-restrict.h (check_bounds_or_overlap): Replace
	gcall* argument with gimple*.
	* gimple-ssa-warn-restrict.c (check_call): Same.
	(wrestrict_dom_walker::before_dom_children): Same.
	(builtin_access::builtin_access): Same.
	(check_bounds_or_overlap): Same
	(maybe_diag_overlap): Same.
	(maybe_diag_offset_bounds): Same.
	* tree-diagnostic.c (default_tree_printer): Move usage of
	EXPR_LOCATION (t) and TREE_BLOCK (t) from within percent_K_format
	to this callsite.
	* tree-pretty-print.c (percent_K_format): Add argument.
	* tree-pretty-print.h: Add argument.
	* tree-ssa-ccp.c (pass_post_ipa_warn::execute): Adjust.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Adjust.
	(maybe_diag_stxncpy_trunc): Same.
	(handle_builtin_stxncpy): Same.
	(handle_builtin_strcat): Same.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	* match.pd: Optimise pointer range checks.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86758
	* tree-vect-stmts.c (vectorizable_simd_clone_call): Don't try
	to remove pattern statements.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Use the
	result of dfs_enumerate_from when constructing stmt_vec_infos,
	instead of additionally calling get_loop_body.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_create_data_ref_ptr): Remove inv_p
	parameter.
	* tree-vect-data-refs.c (vect_create_data_ref_ptr): Likewise.
	When creating an iv, assert that the step is not known to be zero.
	(vect_setup_realignment): Update call accordingly.
	* tree-vect-stmts.c (vectorizable_store): Likewise.
	(vectorizable_load): Likewise.  Handle VMAT_INVARIANT separately.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_stmt_to_vectorize): New function.
	* tree-vect-loop.c (vect_update_vf_for_slp): Use it.
	(vectorizable_reduction): Likewise.
	* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.
	(vect_detect_hybrid_slp_stmts): Likewise.
	* tree-vect-stmts.c (vect_is_simple_use): Likewise.

2018-08-01  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp (zero_nonzero_bits_from_bounds): Rename to...
	(wide_int_set_zero_nonzero_bits): ...this.
	(zero_nonzero_bits_from_vr): Rename to...
	(vrp_set_zero_nonzero_bits): ...this.
	(extract_range_from_multiplicative_op_1): Abstract wide int
	code...
	(wide_int_range_multiplicative_op): ...here.
	(extract_range_from_binary_expr_1): Extract wide int binary
	operations into their own functions.
	(wide_int_range_lshift): New.
	(wide_int_range_can_optimize_bit_op): New.
	(wide_int_range_shift_undefined_p): New.
	(wide_int_range_bit_xor): New.
	(wide_int_range_bit_ior): New.
	(wide_int_range_bit_and): New.
	(wide_int_range_trunc_mod): New.
	(extract_range_into_wide_ints): New.
	(vrp_shift_undefined_p): New.
	(extract_range_from_multiplicative_op): New.
	(vrp_can_optimize_bit_op): New.
	* tree-vrp.h (value_range::dump): New.
	(wide_int_range_multiplicative_op): New.
	(wide_int_range_lshift):New.
	(wide_int_range_shift_undefined_p): New.
	(wide_int_range_bit_xor): New.
	(wide_int_range_bit_ior): New.
	(wide_int_range_bit_and): New.
	(wide_int_range_trunc_mod): New.
	(zero_nonzero_bits_from_bounds): Rename to...
	(wide_int_set_zero_nonzero_bits): ...this.
	(zero_nonzero_bits_from_vr): Rename to...
	(vrp_set_zero_nonzero_bits): ...this.
	(range_easy_mask_min_max): Rename to...
	(wide_int_range_can_optimize_bit_op): this.
	* vr-values.c (simplify_bit_ops_using_ranges): Rename
	zero_nonzero_bits_from_vr into vrp_set_zero_nonzero_bits.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_orig_stmt): New function.
	* tree-vect-data-refs.c (vect_preserves_scalar_order_p): Use it.
	* tree-vect-loop.c (vect_model_reduction_cost): Likewise.
	(vect_create_epilog_for_reduction): Likewise.
	(vectorizable_live_operation): Likewise.
	* tree-vect-slp.c (vect_find_last_scalar_stmt_in_slp): Likewise.
	(vect_detect_hybrid_slp_stmts, vect_schedule_slp): Likewise.
	* tree-vect-stmts.c (vectorizable_call): Likewise.
	(vectorizable_simd_clone_call, vect_remove_stores): Likewise.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_transform_stmt): Remove grouped_store
	argument.
	* tree-vect-stmts.c (vect_transform_stmt): Likewise.
	* tree-vect-loop.c (vect_transform_loop_stmt): Update call accordingly.
	(vect_transform_loop): Likewise.
	* tree-vect-slp.c (vect_schedule_slp_instance): Likewise.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_schedule_slp): Return void.
	* tree-vect-slp.c (vect_schedule_slp_instance): Likewise.
	(vect_schedule_slp): Likewise.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_transform_loop_stmt): Remove slp_scheduled
	argument.
	(vect_transform_loop): Update calls accordingly.  Schedule SLP
	instances before the main loop, if any exist.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86749
	* tree-vect-patterns.c (vect_determine_min_output_precision_1):
	If the lhs is used in a COND_EXPR, check that it is being used
	as the "then" or "else" value.

2018-08-01  Tom de Vries  <tdevries@suse.de>

	PR target/86800
	* config/nvptx/nvptx.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define to
	speculation_safe_value_not_needed.

2018-08-01  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (visit_phi): Compare invariant addresses
	as base and offset.

2018-08-01  Martin Liska  <mliska@suse.cz>

	* value-prof.c (gimple_divmod_fixed_value_transform): Unify
	format how successful transformation is dumped.
	(gimple_mod_pow2_value_transform): Likewise.
	(gimple_mod_subtract_transform): Likewise.
	(gimple_stringops_transform): Likewise.

2018-08-01  Martin Liska  <mliska@suse.cz>

	PR value-prof/35543
	* value-prof.c (interesting_stringop_to_profile_p):
	Simplify the code and add BUILT_IN_MEMMOVE.
	(gimple_stringops_transform): Likewise.

2018-08-01  Sam Tebbs  <sam.tebbs@arm.com>

	* config/aarch64/aarch64-simd.md
	(*aarch64_get_lane_zero_extendsi<mode>): Rename to...
	(*aarch64_get_lane_zero_extend<GPI:mode><VDQQH:mode>): ... This and
	use GPI iterator instead of SI mode.

2018-08-01  Richard Earnshaw  <rearnsha@arm.com>

	* config/rs6000/rs6000.md (speculation_barrier): Renamed from
	rs6000_speculation_barrier.
	* config/rs6000/rs6000.c (rs6000_expand_builtin): Adjust for
	new barrier pattern name.

2018-08-01  Richard Earnshaw  <rearnsha@arm.com>

	* config/i386/i386.md (unspecv): Add UNSPECV_SPECULATION_BARRIER.
	(speculation_barrier): New insn.

2018-08-01  Richard Biener  <rguenther@suse.de>

	PR bootstrap/86724
	* graphite.h: Include isl/id.h and isl/space.h to allow build
	with ISL 0.20.

2018-08-01  Jan Willem Jagersma  <jwjagersma@gmail.com>

	PR target/86651
	* dwarf2out.c (dwarf2out_early_finish): Do not generate assembly in LTO
	mode for COFF targets.
	* defaults.h (TARGET_COFF): Define.
	* config/i386/djgpp.h (TARGET_ASM_LTO_START, TARGET_ASM_LTO_END,
	TARGET_COFF): Define.
	(i386_djgpp_asm_lto_start, i386_djgpp_asm_lto_end): Declare.
	* config/i386/djgpp.c (saved_debug_info_level): New static variable.
	(i386_djgpp_asm_lto_start, i386_djgpp_asm_lto_end): New functions.

2018-07-31  Alexandre Oliva <oliva@adacore.com>

	* gimple-streamer-in.c (input_bb): Restore BB discriminator.
	* gimple-streamer-out.c (output_bb): Save it.
	* lto-streamer-in.c (input_struct_function_base): Restore
	instance discriminator if available.  Create map on demand.
	* lto-streamer-out.c (output_struct_function_base): Save it if
	available.
	* final.c (decl_to_instance_map): Document LTO strategy.

2018-07-31  Alexandre Oliva  <oliva@adacore.com>
	    Olivier Hainque  <hainque@adacore.com>

	* debug.h (decl_to_instance_map_t): New type.
	(decl_to_instance_map): Declare.
	(maybe_create_decl_to_instance_map): New inline function.
	* final.c (bb_discriminator, last_bb_discriminator): New statics,
	to track basic block discriminators.
	(final_start_function_1): Initialize them.
	(final_scan_insn_1): On NOTE_INSN_BASIC_BLOCK, track
	bb_discriminator.
	(decl_to_instance_map): New variable.
	(map_decl_to_instance, maybe_set_discriminator): New functions.
	(notice_source_line): Set discriminator.

2018-07-31  Ian Lance Taylor  <iant@golang.org>

	* targhooks.c (default_have_speculation_safe_value): Add
	ATTRIBUTE_UNUSED.

2018-07-31  David Malcolm  <dmalcolm@redhat.com>

	* dump-context.h: Include "pretty-print.h".
	(dump_context::refresh_dumps_are_enabled): New decl.
	(dump_context::emit_item): New decl.
	(class dump_context): Add fields "m_test_pp" and
	"m_test_pp_flags".
	(temp_dump_context::temp_dump_context): Add param "test_pp_flags".
	(temp_dump_context::get_dumped_text): New decl.
	(class temp_dump_context): Add field "m_pp".
	* dumpfile.c (refresh_dumps_are_enabled): Convert to...
	(dump_context::refresh_dumps_are_enabled): ...and add a test for
	m_test_pp.
	(set_dump_file): Update for above change.
	(set_alt_dump_file): Likewise.
	(dump_loc): New overload, taking a pretty_printer *.
	(dump_context::dump_loc): Call end_any_optinfo.  Dump the location
	to any test pretty-printer.
	(make_item_for_dump_gimple_stmt): New function, adapted from
	optinfo::add_gimple_stmt.
	(dump_context::dump_gimple_stmt): Call it, and use the result,
	eliminating the direct usage of dump_file and alt_dump_file in
	favor of indirectly using them via emit_item.
	(make_item_for_dump_gimple_expr): New function, adapted from
	optinfo::add_gimple_expr.
	(dump_context::dump_gimple_expr): Call it, and use the result,
	eliminating the direct usage of dump_file and alt_dump_file in
	favor of indirectly using them via emit_item.
	(make_item_for_dump_generic_expr): New function, adapted from
	optinfo::add_tree.
	(dump_context::dump_generic_expr): Call it, and use the result,
	eliminating the direct usage of dump_file and alt_dump_file in
	favor of indirectly using them via emit_item.
	(make_item_for_dump_printf_va): New function, adapted from
	optinfo::add_printf_va.
	(make_item_for_dump_printf): New function.
	(dump_context::dump_printf_va): Call make_item_for_dump_printf_va,
	and use the result, eliminating the direct usage of dump_file and
	alt_dump_file in favor of indirectly using them via emit_item.
	(make_item_for_dump_dec): New function.
	(dump_context::dump_dec): Call it, and use the result,
	eliminating the direct usage of dump_file and alt_dump_file in
	favor of indirectly using them via emit_item.
	(make_item_for_dump_symtab_node): New function, adapted from
	optinfo::add_symtab_node.
	(dump_context::dump_symtab_node): Call it, and use the result,
	eliminating the direct usage of dump_file and alt_dump_file in
	favor of indirectly using them via emit_item.
	(dump_context::begin_scope): Reimplement, avoiding direct usage
	of dump_file and alt_dump_file in favor of indirectly using them
	via emit_item.
	(dump_context::emit_item): New member function.
	(temp_dump_context::temp_dump_context): Add param "test_pp_flags".
	Set up test pretty-printer on the underlying context.  Call
	refresh_dumps_are_enabled.
	(temp_dump_context::~temp_dump_context): Call
	refresh_dumps_are_enabled.
	(temp_dump_context::get_dumped_text): New member function.
	(selftest::verify_dumped_text): New function.
	(ASSERT_DUMPED_TEXT_EQ): New macro.
	(selftest::test_capture_of_dump_calls): Run all tests twice, with
	and then without optinfo enabled.  Add uses of
	ASSERT_DUMPED_TEXT_EQ to all tests.  Add test of nested scopes.
	* dumpfile.h: Update comment for the dump_* API.
	* optinfo-emit-json.cc
	(selftest::test_building_json_from_dump_calls): Update for new
	param for temp_dump_context ctor.
	* optinfo.cc (optinfo_item::optinfo_item): Remove "owned" param
	and "m_owned" field.
	(optinfo_item::~optinfo_item): Likewise.
	(optinfo::add_item): New member function.
	(optinfo::emit): Update comment.
	(optinfo::add_string): Delete.
	(optinfo::add_printf): Delete.
	(optinfo::add_printf_va): Delete.
	(optinfo::add_gimple_stmt): Delete.
	(optinfo::add_gimple_expr): Delete.
	(optinfo::add_tree): Delete.
	(optinfo::add_symtab_node): Delete.
	(optinfo::add_dec): Delete.
	* optinfo.h (class dump_context): New forward decl.
	(optinfo::add_item): New decl.
	(optinfo::add_string): Delete.
	(optinfo::add_printf): Delete.
	(optinfo::add_printf_va): Delete.
	(optinfo::add_gimple_stmt): Delete.
	(optinfo::add_gimple_expr): Delete.
	(optinfo::add_tree): Delete.
	(optinfo::add_symtab_node): Delete.
	(optinfo::add_dec): Delete.
	(optinfo::add_poly_int): Delete.
	(optinfo_item::optinfo_item): Remove "owned" param.
	(class optinfo_item): Remove field "m_owned".

2018-07-31  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	PR middle-end/86705
	* gcc/cfgexpand.c (set_parm_rtl): Use the alignment of Pmode when
	MAX_SUPPORTED_STACK_ALIGNMENT would otherwise be exceeded by the
	requested variable alignment.
	(expand_one_ssa_partition): Likewise.
	(expand_one_var): Likewise.

2018-07-31  Richard Earnshaw  <rearnsha@arm.com>

	* config/pdp11/pdp11.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Redefine
	to speculation_safe_value_not_needed.

2018-07-31  Richard Earnshaw  <rearnsha@arm.com>

	* targhooks.h (speculation_safe_value_not_needed): New prototype.
	* targhooks.c (speculation_safe_value_not_needed): New function.
	* target.def (have_speculation_safe_value): Update documentation.
	* doc/tm.texi: Regenerated.

2018-07-31  Richard Earnshaw  <rearnsha@arm.com>

	* config/aarch64/iterators.md (ALLI_TI): New iterator.
	* config/aarch64/aarch64.md (despeculate_copy<ALLI_TI:mode>): New
	expand.
	(despeculate_copy<ALLI:mode>_insn): New insn.
	(despeculate_copyti_insn): New insn.
	(despeculate_simple<ALLI:mode>): New insn
	(despeculate_simpleti): New insn.
	* config/aarch64/aarch64.c (aarch64_speculation_safe_value): New
	function.
	(TARGET_SPECULATION_SAFE_VALUE): Redefine to
	aarch64_speculation_safe_value.
	(aarch64_print_operand): Handle const0_rtx in modifier 'H'.

2018-07-31  Richard Earnshaw  <rearnsha@arm.com>

	* config/aarch64/aarch64-speculation.cc: New file.
	* config/aarch64/aarch64-passes.def (pass_track_speculation): Add
	before pass_reorder_blocks.
	* config/aarch64/aarch64-protos.h (make_pass_track_speculation): Add
	prototype.
	* config/aarch64/aarch64.c (aarch64_conditional_register_usage): Fix
	X14 and X15 when tracking speculation.
	* config/aarch64/aarch64.md (register name constants): Add
	SPECULATION_TRACKER_REGNUM and SPECULATION_SCRATCH_REGNUM.
	(unspec): Add UNSPEC_SPECULATION_TRACKER.
	(speculation_barrier): New insn attribute.
	(cmp<mode>): Allow SP in comparisons.
	(speculation_tracker): New insn.
	(speculation_barrier): Add speculation_barrier attribute.
	* config/aarch64/t-aarch64: Add make rule for aarch64-speculation.o.
	* config.gcc (aarch64*-*-*): Add aarch64-speculation.o to extra_objs.
	* doc/invoke.texi (AArch64 Options): Document -mtrack-speculation.

2018-07-31  Richard Earnshaw  <rearnsha@arm.com>

	* config/aarch64/aarch64.md (cb<optab><mode>1): Disable when
	aarch64_track_speculation is true.
	(tb<optab><mode>1): Likewise.
	* config/aarch64/aarch64.c (aarch64_split_compare_regs): Do not
	generate CB[N]Z when tracking speculation.
	(aarch64_split_compare_and_swap): Likewise.
	(aarch64_split_atomic_op): Likewise.

2018-07-31  Richard Earnshaw  <rearnsha@arm.com>

	* config/aarch64/aarch64.opt (mtrack-speculation): New target option.

2018-07-31  Richard Earnshaw  <rearnsha@arm.com>

	* config/aarch64.md (unspecv): Add UNSPECV_SPECULAION_BARRIER.
	(speculation_barrier): New insn.

2018-07-31  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/unspecs.md (unspecv): Add VUNSPEC_SPECULATION_BARRIER.
	* config/arm/arm.md (speculation_barrier): New expand.
	(speculation_barrier_insn): New pattern.

2018-07-31  Richard Earnshaw  <rearnsha@arm.com>

	* builtin-types.def (BT_FN_PTR_PTR_VAR): New function type.
	(BT_FN_I1_I1_VAR, BT_FN_I2_I2_VAR, BT_FN_I4_I4_VAR): Likewise.
	(BT_FN_I8_I8_VAR, BT_FN_I16_I16_VAR): Likewise.
	* builtin-attrs.def (ATTR_NOVOPS_NOTHROW_LEAF_LIST): New attribute
	list.
	* builtins.def (BUILT_IN_SPECULATION_SAFE_VALUE_N): New builtin.
	(BUILT_IN_SPECULATION_SAFE_VALUE_PTR): New internal builtin.
	(BUILT_IN_SPECULATION_SAFE_VALUE_1): Likewise.
	(BUILT_IN_SPECULATION_SAFE_VALUE_2): Likewise.
	(BUILT_IN_SPECULATION_SAFE_VALUE_4): Likewise.
	(BUILT_IN_SPECULATION_SAFE_VALUE_8): Likewise.
	(BUILT_IN_SPECULATION_SAFE_VALUE_16): Likewise.
	* builtins.c (expand_speculation_safe_value): New function.
	(expand_builtin): Call it.
	* doc/cpp.texi: Document predefine __HAVE_SPECULATION_SAFE_VALUE.
	* doc/extend.texi: Document __builtin_speculation_safe_value.
	* doc/md.texi: Document "speculation_barrier" pattern.
	* doc/tm.texi.in: Pull in TARGET_SPECULATION_SAFE_VALUE and
	TARGET_HAVE_SPECULATION_SAFE_VALUE.
	* doc/tm.texi: Regenerated.
	* target.def (have_speculation_safe_value, speculation_safe_value): New
	hooks.
	* targhooks.c (default_have_speculation_safe_value): New function.
	(default_speculation_safe_value): New function.
	* targhooks.h (default_have_speculation_safe_value): Add prototype.
	(default_speculation_safe_value): Add prototype.

2018-07-31  David Malcolm  <dmalcolm@redhat.com>

	* dump-context.h (dump_context::dump_loc): New decl.
	* dumpfile.c (dump_context::dump_loc): New member function.
	(dump_context::dump_gimple_stmt_loc): Reimplement using dump_loc
	and dump_gimple_stmt.
	(dump_context::dump_gimple_expr_loc): Likewise, using
	dump_gimple_expr.
	(dump_context::dump_generic_expr_loc): Likewise, using
	dump_generic_expr.
	(dump_context::dump_printf_loc_va): Likewise, using
	dump_printf_va.
	(dump_context::begin_scope): Explicitly using the global function
	"dump_loc", rather than the member function.

2018-07-31  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86741
	* tree-vrp.c (vrp_prop::check_mem_ref): Avoid incomplete types.

2018-07-31  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_expand_setmem): Make the unrolling to
	depend on whether prefetch instructions will be emitted or not.
	Use TARGET_SETMEM_PFD for checking whether prefetch instructions
	will be emitted or not.
	* config/s390/s390.h (TARGET_SETMEM_PREFETCH_DISTANCE)
	(TARGET_SETMEM_PFD): New macros.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (stmt_vec_info): Turn back into a typedef.
	(NULL_STMT_VEC_INFO): Delete.
	(stmt_vec_info::operator*): Likewise.
	(stmt_vec_info::operator gimple *): Likewise.
	* tree-vect-loop.c (vectorizable_reduction): Use NULL instead
	of NULL_STMT_VEC_INFO.
	* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
	(vect_reassociating_reduction_p): Likewise.
	* tree-vect-stmts.c (vect_build_gather_load_calls): Likewise.
	(vectorizable_store): Likewise.
	* tree-vectorizer.c (vec_info::set_vinfo_for_stmt): Likewise.
	(vec_info::free_stmt_vec_infos): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_stmt_in_region_p): Delete.
	* tree-vectorizer.c (vect_stmt_in_region_p): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::new_vinfo_for_stmt)
	(vec_info::set_vinfo_for_stmt, vec_info::free_stmt_vec_infos)
	(vec_info::free_stmt_vec_info): New private member functions.
	(set_stmt_vec_info_vec, free_stmt_vec_infos, vinfo_for_stmt)
	(set_vinfo_for_stmt, new_stmt_vec_info, free_stmt_vec_info): Delete.
	* tree-parloops.c (gather_scalar_reductions): Remove calls to
	set_stmt_vec_info_vec and free_stmt_vec_infos.
	* tree-vect-loop.c (_loop_vec_info): Remove call to
	set_stmt_vec_info_vec.
	* tree-vect-stmts.c (new_stmt_vec_info, set_stmt_vec_info_vec)
	(free_stmt_vec_infos, free_stmt_vec_info): Delete in favor of...
	* tree-vectorizer.c (vec_info::new_stmt_vec_info)
	(vec_info::set_vinfo_for_stmt, vec_info::free_stmt_vec_infos)
	(vec_info::free_stmt_vec_info): ...these new functions.  Remove
	assignments in {vec_info::,}new_stmt_vec_info that are redundant
	with the clearing in the xcalloc.
	(stmt_vec_info_vec): Delete.
	(vec_info::vec_info): Don't call set_stmt_vec_info_vec.
	(vectorize_loops): Likewise.
	(vec_info::~vec_info): Remove argument from call to
	free_stmt_vec_infos.
	(vec_info::add_stmt): Remove vinfo argument from call to
	new_stmt_vec_info.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (free_stmt_vec_info): Take a stmt_vec_info
	rather than a gimple stmt.
	* tree-vect-stmts.c (free_stmt_vec_info): Likewise.  Don't free
	information for pattern statements when passed the original
	statement; instead wait to be passed the pattern statement itself.
	Don't call set_vinfo_for_stmt here.
	(free_stmt_vec_infos): Update call to free_stmt_vec_info.
	* tree-vect-loop.c (_loop_vec_info::~loop_vec_info): Don't free
	stmt_vec_infos here.
	* tree-vect-slp.c (_bb_vec_info::~bb_vec_info): Likewise.
	* tree-vectorizer.c (vec_info::remove_stmt): Nullify the statement's
	stmt_vec_infos entry.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::replace_stmt): Declare.
	* tree-vectorizer.c (vec_info::replace_stmt): New function.
	* tree-vect-slp.c (vect_remove_slp_scalar_calls): Use it.
	* tree-vect-stmts.c (vectorizable_call): Likewise.
	(vectorizable_simd_clone_call): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::remove_stmt): Declare.
	* tree-vectorizer.c (vec_info::remove_stmt): New function.
	* tree-vect-loop-manip.c (vect_set_loop_condition): Use it.
	* tree-vect-loop.c (vect_transform_loop): Likewise.
	* tree-vect-slp.c (vect_schedule_slp): Likewise.
	* tree-vect-stmts.c (vect_remove_stores): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::lookup_dr): New member function.
	(vect_dr_stmt): Delete.
	* tree-vectorizer.c (vec_info::lookup_dr): New function.
	* tree-vect-loop-manip.c (vect_update_inits_of_drs): Use it instead
	of DR_VECT_AUX.
	* tree-vect-data-refs.c (vect_analyze_possibly_independent_ddr)
	(vect_analyze_data_ref_dependence, vect_record_base_alignments)
	(vect_verify_datarefs_alignment, vect_peeling_supportable)
	(vect_analyze_data_ref_accesses, vect_prune_runtime_alias_test_list)
	(vect_analyze_data_refs): Likewise.
	(vect_slp_analyze_data_ref_dependence): Likewise.  Take a vec_info
	argument.
	(vect_find_same_alignment_drs): Likewise.
	(vect_slp_analyze_node_dependences): Update calls accordingly.
	(vect_analyze_data_refs_alignment): Likewise.  Use vec_info::lookup_dr
	instead of DR_VECT_AUX.
	(vect_get_peeling_costs_all_drs): Take a loop_vec_info instead
	of a vector data references.  Use vec_info::lookup_dr instead of
	DR_VECT_AUX.
	(vect_peeling_hash_get_lowest_cost): Update calls accordingly.
	(vect_enhance_data_refs_alignment): Likewise.  Use vec_info::lookup_dr
	instead of DR_VECT_AUX.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_loop_vec_info::unaligned_dr): Change to
	dr_vec_info.
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Update
	accordingly.
	* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
	* tree-vect-loop-manip.c (get_misalign_in_elems): Likewise.
	(vect_gen_prolog_loop_niters): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (set_dr_misalignment, dr_misalignment)
	(DR_TARGET_ALIGNMENT, aligned_access_p, known_alignment_for_access_p)
	(vect_known_alignment_in_bytes, vect_dr_behavior)
	(vect_get_scalar_dr_size): Take references as dr_vec_infos
	instead of data_references.  Update calls to other routines for
	which the same change has been made.
	* tree-vect-data-refs.c (vect_preserves_scalar_order_p): Take
	dr_vec_infos instead of stmt_vec_infos.
	(vect_analyze_data_ref_dependence): Update call accordingly.
	(vect_slp_analyze_data_ref_dependence)
	(vect_record_base_alignments): Use DR_VECT_AUX.
	(vect_calculate_target_alignment, vect_compute_data_ref_alignment)
	(vect_update_misalignment_for_peel, verify_data_ref_alignment)
	(vector_alignment_reachable_p, vect_get_data_access_cost)
	(vect_peeling_supportable, vect_analyze_group_access_1)
	(vect_analyze_group_access, vect_analyze_data_ref_access)
	(vect_vfa_segment_size, vect_vfa_access_size, vect_vfa_align)
	(vect_compile_time_alias, vect_small_gap_p)
	(vectorizable_with_step_bound_p, vect_duplicate_ssa_name_ptr_info):
	(vect_supportable_dr_alignment): Take references as dr_vec_infos
	instead of data_references.  Update calls to other routines for
	which the same change has been made.
	(vect_verify_datarefs_alignment, vect_get_peeling_costs_all_drs)
	(vect_find_same_alignment_drs, vect_analyze_data_refs_alignment)
	(vect_slp_analyze_and_verify_node_alignment)
	(vect_analyze_data_ref_accesses, vect_prune_runtime_alias_test_list)
	(vect_create_addr_base_for_vector_ref, vect_create_data_ref_ptr)
	(vect_setup_realignment): Use dr_vec_infos.  Update calls after
	above changes.
	(_vect_peel_info::dr): Replace with...
	(_vect_peel_info::dr_info): ...this new field.
	(vect_peeling_hash_get_most_frequent)
	(vect_peeling_hash_choose_best_peeling): Update accordingly.
	(vect_peeling_hash_get_lowest_cost):
	(vect_enhance_data_refs_alignment): Likewise.  Update calls to other
	routines for which the same change has been made.
	(vect_peeling_hash_insert): Likewise.  Take a dr_vec_info instead of a
	data_reference.
	* tree-vect-loop-manip.c (get_misalign_in_elems)
	(vect_gen_prolog_loop_niters): Use dr_vec_infos.  Update calls after
	above changes.
	* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
	* tree-vect-stmts.c (vect_get_store_cost, vect_get_load_cost)
	(vect_truncate_gather_scatter_offset, compare_step_with_zero)
	(get_group_load_store_type, get_negative_load_store_type)
	(vect_get_data_ptr_increment, vectorizable_store)
	(vectorizable_load): Likewise.
	(ensure_base_align): Take a dr_vec_info instead of a data_reference.
	Update calls to other routines for which the same change has been made.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::move_dr): New member function.
	(dataref_aux): Rename to...
	(dr_vec_info): ...this and add "dr" and "stmt" fields.
	(_stmt_vec_info::dr_aux): Update accordingly.
	(_stmt_vec_info::data_ref_info): Delete.
	(STMT_VINFO_GROUPED_ACCESS, DR_GROUP_FIRST_ELEMENT)
	(DR_GROUP_NEXT_ELEMENT, DR_GROUP_SIZE, DR_GROUP_STORE_COUNT)
	(DR_GROUP_GAP, DR_GROUP_SAME_DR_STMT, REDUC_GROUP_FIRST_ELEMENT):
	(REDUC_GROUP_NEXT_ELEMENT, REDUC_GROUP_SIZE): Use dr_aux.dr instead
	of data_ref.
	(STMT_VINFO_DATA_REF): Likewise.  Turn into an lvalue.
	(STMT_VINFO_DR_INFO): New macro.
	(DR_VECT_AUX): Use STMT_VINFO_DR_INKFO and vect_dr_stmt.
	(set_dr_misalignment): Update after rename of dataref_aux.
	(vect_dr_stmt): Move earlier in file.  Return dr_aux.stmt.
	* tree-vect-stmts.c (new_stmt_vec_info): Remove redundant
	initialization of STMT_VINFO_DATA_REF.
	* tree-vectorizer.c (vec_info::move_dr): New function.
	* tree-vect-patterns.c (vect_recog_bool_pattern)
	(vect_recog_mask_conversion_pattern)
	(vect_recog_gather_scatter_pattern): Use it.
	* tree-vect-data-refs.c (vect_analyze_data_refs): Initialize
	the "dr" and "stmt" fields of dr_vec_info instead of
	STMT_VINFO_DATA_REF.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_stmt_vec_info::pattern_stmt_p): New field.
	(is_pattern_stmt_p): Use it.
	* tree-vect-patterns.c (vect_init_pattern_stmt): Set pattern_stmt_p
	on pattern statements.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_mark_pattern_stmts): Take the
	original stmt as a stmt_vec_info rather than a gimple stmt.
	(vect_pattern_recog_1): Take the statement directly as a
	stmt_vec_info, rather than via a gimple_stmt_iterator.
	Update call to vect_mark_pattern_stmts.
	(vect_pattern_recog): Update calls accordingly.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_get_vec_defs_for_stmt_copy)
	(vect_get_vec_def_for_stmt_copy): Take a vec_info rather than
	a vect_def_type for the first argument.
	* tree-vect-stmts.c (vect_get_vec_defs_for_stmt_copy): Likewise.
	(vect_get_vec_def_for_stmt_copy): Likewise.  Return the original
	operand if it isn't defined by a vectorized statement.
	(vect_build_gather_load_calls): Remove the mask_dt argument and
	update calls to vect_get_vec_def_for_stmt_copy.
	(vectorizable_bswap): Likewise the dt argument.
	(vectorizable_call): Update calls to vectorizable_bswap and
	vect_get_vec_def_for_stmt_copy.
	(vectorizable_simd_clone_call, vectorizable_assignment)
	(vectorizable_shift, vectorizable_operation, vectorizable_condition)
	(vectorizable_comparison): Update calls to
	vect_get_vec_def_for_stmt_copy.
	(vectorizable_store): Likewise.  Remove now-unnecessary calls to
	vect_is_simple_use.
	(vect_get_loop_based_defs): Remove dt argument and update call
	to vect_get_vec_def_for_stmt_copy.
	(vectorizable_conversion): Update calls to vect_get_loop_based_defs
	and vect_get_vec_def_for_stmt_copy.
	(vectorizable_load): Update calls to vect_build_gather_load_calls
	and vect_get_vec_def_for_stmt_copy.
	* tree-vect-loop.c (vect_create_epilog_for_reduction)
	(vectorizable_reduction, vectorizable_live_operation): Update calls
	to vect_get_vec_def_for_stmt_copy.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-data-refs.c (vect_record_base_alignment): Replace vec_info
	and gimple stmt arguments with a stmt_vec_info.
	(vect_record_base_alignments): Update calls accordingly.
	* tree-vect-slp.c (vect_record_max_nunits): Replace vec_info
	and gimple stmt arguments with a stmt_vec_info.
	(vect_build_slp_tree_1): Remove vinfo argument and update call
	to vect_record_max_nunits.
	(vect_build_slp_tree_2): Update calls to vect_build_slp_tree_1
	and vect_record_max_nunits.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (nested_in_vect_loop_p): Move further down
	file and take a stmt_vec_info instead of a gimple stmt.
	(supportable_widening_operation, vect_finish_replace_stmt)
	(vect_finish_stmt_generation, vect_get_store_rhs)
	(vect_get_vec_def_for_operand_1, vect_get_vec_def_for_operand)
	(vect_get_vec_defs, vect_init_vector, vect_transform_stmt)
	(vect_remove_stores, vect_analyze_stmt, vectorizable_condition)
	(vect_get_smallest_scalar_type, vect_check_gather_scatter)
	(vect_create_data_ref_ptr, bump_vector_ptr)
	(vect_permute_store_chain, vect_setup_realignment)
	(vect_transform_grouped_load, vect_record_grouped_load_vectors)
	(vect_create_addr_base_for_vector_ref, vectorizable_live_operation)
	(vectorizable_reduction, vectorizable_induction)
	(get_initial_def_for_reduction, is_simple_and_all_uses_invariant)
	(vect_get_place_in_interleaving_chain): Take stmt_vec_infos rather
	than gimple stmts as arguments.
	* tree-vect-data-refs.c (vect_get_smallest_scalar_type)
	(vect_preserves_scalar_order_p, vect_slp_analyze_node_dependences)
	(can_group_stmts_p, vect_check_gather_scatter)
	(vect_create_addr_base_for_vector_ref, vect_create_data_ref_ptr)
	(bump_vector_ptr, vect_permute_store_chain, vect_setup_realignment)
	(vect_permute_load_chain, vect_shift_permute_load_chain)
	(vect_transform_grouped_load)
	(vect_record_grouped_load_vectors): Likewise.
	* tree-vect-loop.c (vect_fixup_reduc_chain)
	(get_initial_def_for_reduction, vect_create_epilog_for_reduction)
	(vectorize_fold_left_reduction, is_nonwrapping_integer_induction)
	(vectorizable_reduction, vectorizable_induction)
	(vectorizable_live_operation, vect_loop_kill_debug_uses): Likewise.
	* tree-vect-patterns.c (type_conversion_p, adjust_bool_stmts)
	(vect_get_load_store_mask): Likewise.
	* tree-vect-slp.c (vect_get_place_in_interleaving_chain)
	(vect_analyze_slp_instance, vect_mask_constant_operand_p): Likewise.
	* tree-vect-stmts.c (vect_mark_relevant)
	(is_simple_and_all_uses_invariant)
	(exist_non_indexing_operands_for_use_p, process_use)
	(vect_init_vector_1, vect_init_vector, vect_get_vec_def_for_operand_1)
	(vect_get_vec_def_for_operand, vect_get_vec_defs)
	(vect_finish_stmt_generation_1, vect_finish_replace_stmt)
	(vect_finish_stmt_generation, vect_truncate_gather_scatter_offset)
	(compare_step_with_zero, vect_get_store_rhs, get_group_load_store_type)
	(get_negative_load_store_type, get_load_store_type)
	(vect_check_load_store_mask, vect_check_store_rhs)
	(vect_build_gather_load_calls, vect_get_strided_load_store_ops)
	(vectorizable_bswap, vectorizable_call, vectorizable_simd_clone_call)
	(vect_create_vectorized_demotion_stmts, vectorizable_conversion)
	(vectorizable_assignment, vectorizable_shift, vectorizable_operation)
	(get_group_alias_ptr_type, vectorizable_store, hoist_defs_of_uses)
	(vectorizable_load, vectorizable_condition, vectorizable_comparison)
	(vect_analyze_stmt, vect_transform_stmt, vect_remove_stores)
	(supportable_widening_operation): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-data-refs.c (vect_describe_gather_scatter_call): Take
	a stmt_vec_info instead of a gcall.
	(vect_check_gather_scatter): Update call accordingly.
	* tree-vect-loop-manip.c (iv_phi_p): Take a stmt_vec_info instead
	of a gphi.
	(vect_can_advance_ivs_p, vect_update_ivs_after_vectorizer)
	(slpeel_update_phi_nodes_for_loops):): Update calls accordingly.
	* tree-vect-loop.c (vect_transform_loop_stmt): Take a stmt_vec_info
	instead of a gimple stmt.
	(vect_transform_loop): Update calls accordingly.
	* tree-vect-slp.c (vect_split_slp_store_group): Take and return
	stmt_vec_infos instead of gimple stmts.
	(vect_analyze_slp_instance): Update use accordingly.
	* tree-vect-stmts.c (read_vector_array, write_vector_array)
	(vect_clobber_variable, vect_stmt_relevant_p, permute_vec_elements)
	(vect_use_strided_gather_scatters_p, vect_build_all_ones_mask)
	(vect_build_zero_merge_argument, vect_get_gather_scatter_ops)
	(vect_gen_widened_results_half, vect_get_loop_based_defs)
	(vect_create_vectorized_promotion_stmts, can_vectorize_live_stmts):
	Take a stmt_vec_info instead of a gimple stmt and pass stmt_vec_infos
	down to subroutines.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_analyze_scalar_cycles_1): Change the type
	of the worklist from a vector of gimple stmts to a vector of
	stmt_vec_infos.
	* tree-vect-stmts.c (vect_mark_relevant, process_use)
	(vect_mark_stmts_to_be_vectorized): Likewise

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_analyze_loop_operations): Look up the
	statement before passing it to vect_analyze_stmt.
	(vect_create_epilog_for_reduction): Use a stmt_vec_info to walk
	the chain of phi vector definitions.  Track the exit phi via its
	stmt_vec_info.
	(vectorizable_reduction): Set cond_stmt_vinfo directly from the
	STMT_VINFO_REDUC_DEF.
	* tree-vect-slp.c (vect_get_place_in_interleaving_chain): Use
	stmt_vec_infos to handle the statement chains.
	(vect_get_slp_defs): Record the first statement in the node
	using a stmt_vec_info.
	* tree-vect-stmts.c (vect_mark_stmts_to_be_vectorized): Look up
	statements here and pass their stmt_vec_info down to subroutines.
	(vect_init_vector_1): Hoist call to vinfo_for_stmt and pass it
	down to vect_finish_stmt_generation.
	(vect_init_vector, vect_get_vec_defs, vect_finish_replace_stmt)
	(vect_finish_stmt_generation): Call vinfo_for_stmt and pass
	stmt_vec_infos to subroutines.
	(vect_remove_stores): Use stmt_vec_infos to handle the statement
	chains.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-data-refs.c (vect_slp_analyze_node_dependences):
	(vect_check_gather_scatter, vect_create_data_ref_ptr, bump_vector_ptr)
	(vect_permute_store_chain, vect_setup_realignment)
	(vect_permute_load_chain, vect_shift_permute_load_chain)
	(vect_transform_grouped_load): Use stmt_vec_info rather than gimple
	stmts internally, and when passing values to other vectorizer routines.
	* tree-vect-loop-manip.c (vect_can_advance_ivs_p): Likewise.
	* tree-vect-loop.c (vect_analyze_scalar_cycles_1)
	(vect_analyze_loop_operations, get_initial_def_for_reduction)
	(vect_create_epilog_for_reduction, vectorize_fold_left_reduction)
	(vectorizable_reduction, vectorizable_induction)
	(vectorizable_live_operation, vect_transform_loop_stmt)
	(vect_transform_loop): Likewise.
	* tree-vect-patterns.c (vect_reassociating_reduction_p)
	(vect_recog_widen_op_pattern, vect_recog_mixed_size_cond_pattern)
	(vect_recog_bool_pattern, vect_recog_gather_scatter_pattern): Likewise.
	* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.
	(vect_slp_analyze_node_operations_1): Likewise.
	* tree-vect-stmts.c (vect_mark_relevant, process_use)
	(exist_non_indexing_operands_for_use_p, vect_init_vector_1)
	(vect_mark_stmts_to_be_vectorized, vect_get_vec_def_for_operand)
	(vect_finish_stmt_generation_1, get_group_load_store_type)
	(get_load_store_type, vect_build_gather_load_calls)
	(vectorizable_bswap, vectorizable_call, vectorizable_simd_clone_call)
	(vect_create_vectorized_demotion_stmts, vectorizable_conversion)
	(vectorizable_assignment, vectorizable_shift, vectorizable_operation)
	(vectorizable_store, vectorizable_load, vectorizable_condition)
	(vectorizable_comparison, vect_analyze_stmt, vect_transform_stmt)
	(supportable_widening_operation): Likewise.
	(vect_get_vector_types_for_stmt): Likewise.
	* tree-vectorizer.h (vect_dr_behavior): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-data-refs.c (vect_analyze_data_ref_dependence)
	(vect_slp_analyze_node_dependences, vect_analyze_data_ref_accesses)
	(vect_permute_store_chain, vect_permute_load_chain)
	(vect_shift_permute_load_chain, vect_transform_grouped_load): Avoid
	repeated stmt_vec_info lookups.
	* tree-vect-loop-manip.c (vect_can_advance_ivs_p): Likewise.
	(vect_update_ivs_after_vectorizer): Likewise.
	* tree-vect-loop.c (vect_is_simple_reduction): Likewise.
	(vect_create_epilog_for_reduction, vectorizable_reduction): Likewise.
	* tree-vect-patterns.c (adjust_bool_stmts): Likewise.
	* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.
	(vect_bb_slp_scalar_cost): Likewise.
	* tree-vect-stmts.c (get_group_alias_ptr_type): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-data-refs.c (vect_check_gather_scatter): Pass the
	gcall rather than the generic gimple stmt to gimple_call_internal_fn.
	(vect_get_smallest_scalar_type, can_group_stmts_p): Use dyn_cast
	to get gassigns and gcalls, rather than operating on generc gimple
	stmts.
	* tree-vect-stmts.c (exist_non_indexing_operands_for_use_p)
	(vect_mark_stmts_to_be_vectorized, vectorizable_store)
	(vectorizable_load, vect_analyze_stmt): Likewise.
	* tree-vect-loop.c (vectorizable_reduction): Likewise gphi.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (get_earlier_stmt, get_later_stmt): Take and
	return stmt_vec_infos rather than gimple stmts.  Do not accept
	null arguments.
	(vect_find_last_scalar_stmt_in_slp): Return a stmt_vec_info instead
	of a gimple stmt.
	* tree-vect-slp.c (vect_find_last_scalar_stmt_in_slp): Likewise.
	Update use of get_later_stmt.
	(vect_get_constant_vectors): Update call accordingly.
	(vect_schedule_slp_instance): Likewise
	* tree-vect-data-refs.c (vect_slp_analyze_node_dependences): Likewise.
	(vect_slp_analyze_instance_dependence): Likewise.
	(vect_preserves_scalar_order_p): Update use of get_earlier_stmt.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (stmt_info_for_cost::stmt): Replace with...
	(stmt_info_for_cost::stmt_info): ...this new field.
	(add_stmt_costs): Update accordingly.
	* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost)
	(vect_get_known_peeling_cost): Likewise.
	(vect_estimate_min_profitable_iters): Likewise.
	* tree-vect-stmts.c (record_stmt_cost): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_loop_vec_info::may_misalign_stmts): Change
	from an auto_vec<gimple *> to an auto_vec<stmt_vec_info>.
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Update
	accordingly.
	* tree-vect-loop-manip.c (vect_create_cond_for_align_checks): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_stmt_vec_info::same_dr_stmt): Change from
	a gimple stmt to a stmt_vec_info.
	* tree-vect-stmts.c (vectorizable_load): Update accordingly.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::grouped_stores): Change from
	an auto_vec<gimple *> to an auto_vec<stmt_vec_info>.
	(_loop_vec_info::reduction_chains): Likewise.
	* tree-vect-loop.c (vect_fixup_scalar_cycles_with_patterns): Update
	accordingly.
	* tree-vect-slp.c (vect_analyze_slp): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_stmt_vec_info::first_element): Change from
	a gimple stmt to a stmt_vec_info.
	(_stmt_vec_info::next_element): Likewise.
	* tree-vect-data-refs.c (vect_update_misalignment_for_peel)
	(vect_slp_analyze_and_verify_node_alignment)
	(vect_analyze_group_access_1, vect_analyze_group_access)
	(vect_small_gap_p, vect_prune_runtime_alias_test_list)
	(vect_create_data_ref_ptr, vect_record_grouped_load_vectors)
	(vect_supportable_dr_alignment): Update accordingly.
	* tree-vect-loop.c (vect_fixup_reduc_chain): Likewise.
	(vect_fixup_scalar_cycles_with_patterns, vect_is_slp_reduction)
	(vect_is_simple_reduction, vectorizable_reduction): Likewise.
	* tree-vect-patterns.c (vect_reassociating_reduction_p): Likewise.
	* tree-vect-slp.c (vect_build_slp_tree_1)
	(vect_attempt_slp_rearrange_stmts, vect_supported_load_permutation_p)
	(vect_split_slp_store_group, vect_analyze_slp_instance)
	(vect_analyze_slp, vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (vect_model_store_cost, vect_model_load_cost)
	(get_group_load_store_type, get_load_store_type)
	(get_group_alias_ptr_type, vectorizable_store, vectorizable_load)
	(vect_transform_stmt, vect_remove_stores): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_dr_stmt): Return a stmt_vec_info rather
	than a gimple stmt.
	* tree-vect-data-refs.c (vect_analyze_data_ref_dependence)
	(vect_slp_analyze_data_ref_dependence, vect_record_base_alignments)
	(vect_calculate_target_alignmentm, vect_compute_data_ref_alignment)
	(vect_update_misalignment_for_peel, vect_verify_datarefs_alignment)
	(vector_alignment_reachable_p, vect_get_data_access_cost)
	(vect_get_peeling_costs_all_drs, vect_peeling_hash_get_lowest_cost)
	(vect_peeling_supportable, vect_enhance_data_refs_alignment)
	(vect_find_same_alignment_drs, vect_analyze_data_refs_alignment)
	(vect_analyze_group_access_1, vect_analyze_group_access)
	(vect_analyze_data_ref_access, vect_analyze_data_ref_accesses)
	(vect_vfa_access_size, vect_small_gap_p, vect_analyze_data_refs)
	(vect_supportable_dr_alignment): Remove vinfo_for_stmt from the
	result of vect_dr_stmt and use the stmt_vec_info instead of
	the associated gimple stmt.
	* tree-vect-loop-manip.c (get_misalign_in_elems): Likewise.
	(vect_gen_prolog_loop_niters): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_2): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_slp_tree::stmts): Change from a vec<gimple *>
	to a vec<stmt_vec_info>.
	* tree-vect-slp.c (vect_free_slp_tree): Update accordingly.
	(vect_create_new_slp_node): Take a vec<gimple *> instead of a
	vec<stmt_vec_info>.
	(_slp_oprnd_info::def_stmts): Change from a vec<gimple *>
	to a vec<stmt_vec_info>.
	(bst_traits::value_type, bst_traits::value_type): Likewise.
	(bst_traits::hash): Update accordingly.
	(vect_get_and_check_slp_defs): Change the stmts parameter from
	a vec<gimple *> to a vec<stmt_vec_info>.
	(vect_two_operations_perm_ok_p, vect_build_slp_tree_1): Likewise.
	(vect_build_slp_tree): Likewise.
	(vect_build_slp_tree_2): Likewise.  Update uses of
	SLP_TREE_SCALAR_STMTS.
	(vect_print_slp_tree): Update uses of SLP_TREE_SCALAR_STMTS.
	(vect_mark_slp_stmts, vect_mark_slp_stmts_relevant)
	(vect_slp_rearrange_stmts, vect_attempt_slp_rearrange_stmts)
	(vect_supported_load_permutation_p, vect_find_last_scalar_stmt_in_slp)
	(vect_detect_hybrid_slp_stmts, vect_slp_analyze_node_operations_1)
	(vect_slp_analyze_node_operations, vect_slp_analyze_operations)
	(vect_bb_slp_scalar_cost, vect_slp_analyze_bb_1)
	(vect_get_constant_vectors, vect_get_slp_defs)
	(vect_transform_slp_perm_load, vect_schedule_slp_instance)
	(vect_remove_slp_scalar_calls, vect_schedule_slp): Likewise.
	(vect_analyze_slp_instance): Build up a vec of stmt_vec_infos
	instead of gimple stmts.
	* tree-vect-data-refs.c (vect_slp_analyze_node_dependences): Change
	the stores parameter for a vec<gimple *> to a vec<stmt_vec_info>.
	(vect_slp_analyze_instance_dependence): Update uses of
	SLP_TREE_SCALAR_STMTS.
	(vect_slp_analyze_and_verify_node_alignment): Likewise.
	(vect_slp_analyze_and_verify_instance_alignment): Likewise.
	* tree-vect-loop.c (neutral_op_for_slp_reduction): Likewise.
	(get_initial_defs_for_reduction): Likewise.
	(vect_create_epilog_for_reduction): Likewise.
	(vectorize_fold_left_reduction): Likewise.
	* tree-vect-stmts.c (vect_prologue_cost_for_slp_op): Likewise.
	(vect_model_simple_cost, vectorizable_shift, vectorizable_load)
	(can_vectorize_live_stmts): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_loop_vec_info::reductions): Change from an
	auto_vec<gimple *> to an auto_vec<stmt_vec_info>.
	(vect_force_simple_reduction): Take and return stmt_vec_infos rather
	than gimple stmts.
	* tree-parloops.c (valid_reduction_p): Take a stmt_vec_info instead
	of a gimple stmt.
	(gather_scalar_reductions): Update after above interface changes.
	* tree-vect-loop.c (vect_analyze_scalar_cycles_1): Likewise.
	(vect_is_simple_reduction): Take and return stmt_vec_infos rather
	than gimple stmts.
	(vect_force_simple_reduction): Likewise.
	* tree-vect-patterns.c (vect_pattern_recog_1): Update use of
	LOOP_VINFO_REDUCTIONS.
	* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_stmt_vec_info::reduc_def): Change from
	a gimple stmt to a stmt_vec_info.
	* tree-vect-loop.c (vect_active_double_reduction_p)
	(vect_force_simple_reduction, vectorizable_reduction): Update
	accordingly.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_slp_tree::vec_stmts): Change from a
	vec<gimple *> to a vec<stmt_vec_info>.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Change
	the reduction_phis argument from a vec<gimple *> to a
	vec<stmt_vec_info>.
	(vectorizable_reduction): Likewise the phis local variable that
	is passed to vect_create_epilog_for_reduction.  Update for new type
	of SLP_TREE_VEC_STMTS.
	(vectorizable_induction): Update for new type of SLP_TREE_VEC_STMTS.
	(vectorizable_live_operation): Likewise.
	* tree-vect-slp.c (vect_get_slp_vect_defs): Likewise.
	(vect_transform_slp_perm_load, vect_schedule_slp_instance): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_stmt_vec_info::vectorized_stmt): Change from
	a gimple stmt to a stmt_vec_info.
	(vectorizable_condition, vectorizable_live_operation)
	(vectorizable_reduction, vectorizable_induction): Pass back the
	vectorized statement as a stmt_vec_info.
	* tree-vect-data-refs.c (vect_record_grouped_load_vectors): Update
	use of STMT_VINFO_VEC_STMT.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise,
	accumulating the inner phis that feed the STMT_VINFO_VEC_STMT
	as stmt_vec_infos rather than gimple stmts.
	(vectorize_fold_left_reduction): Change vec_stmt from a gimple stmt
	to a stmt_vec_info.
	(vectorizable_live_operation): Likewise.
	(vectorizable_reduction, vectorizable_induction): Likewise,
	updating use of STMT_VINFO_VEC_STMT.
	* tree-vect-stmts.c (vect_get_vec_def_for_operand_1): Update use
	of STMT_VINFO_VEC_STMT.
	(vect_build_gather_load_calls, vectorizable_bswap, vectorizable_call)
	(vectorizable_simd_clone_call, vectorizable_conversion)
	(vectorizable_assignment, vectorizable_shift, vectorizable_operation)
	(vectorizable_store, vectorizable_load, vectorizable_condition)
	(vectorizable_comparison, can_vectorize_live_stmts): Change vec_stmt
	from a gimple stmt to a stmt_vec_info.
	(vect_transform_stmt): Update use of STMT_VINFO_VEC_STMT.  Pass a
	pointer to a stmt_vec_info to the vectorizable_* routines.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_stmt_vec_info::related_stmt): Change from
	a gimple stmt to a stmt_vec_info.
	(is_pattern_stmt_p): Update accordingly.
	* tree-vect-data-refs.c (vect_preserves_scalar_order_p): Likewise.
	(vect_record_grouped_load_vectors): Likewise.
	* tree-vect-loop.c (vect_determine_vf_for_stmt): Likewise.
	(vect_fixup_reduc_chain, vect_update_vf_for_slp): Likewise.
	(vect_model_reduction_cost): Likewise.
	(vect_create_epilog_for_reduction): Likewise.
	(vectorizable_reduction, vectorizable_induction): Likewise.
	* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
	Return the stmt_vec_info for the pattern statement.
	(vect_set_pattern_stmt): Update use of STMT_VINFO_RELATED_STMT.
	(vect_split_statement, vect_mark_pattern_stmts): Likewise.
	* tree-vect-slp.c (vect_detect_hybrid_slp_stmts): Likewise.
	(vect_detect_hybrid_slp, vect_get_slp_defs): Likewise.
	* tree-vect-stmts.c (vect_mark_relevant): Likewise.
	(vect_get_vec_def_for_operand_1, vectorizable_call): Likewise.
	(vectorizable_simd_clone_call, vect_analyze_stmt, new_stmt_vec_info)
	(free_stmt_vec_info, vect_is_simple_use): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_finish_replace_stmt): Return a stmt_vec_info
	(vect_finish_stmt_generation): Likewise.
	* tree-vect-stmts.c (vect_finish_stmt_generation_1): Likewise.
	(vect_finish_replace_stmt, vect_finish_stmt_generation): Likewise.
	(vect_build_gather_load_calls): Use the return value of the above
	functions instead of a separate call to vinfo_for_stmt.  Use narrow
	scopes for the input gimple stmt and wider scopes for the associated
	stmt_vec_info.  Use vec_info::lookup_def when setting these
	stmt_vec_infos from an SSA_NAME definition.
	(vectorizable_bswap, vectorizable_call, vectorizable_simd_clone_call)
	(vect_create_vectorized_demotion_stmts, vectorizable_conversion)
	(vectorizable_assignment, vectorizable_shift, vectorizable_operation)
	(vectorizable_store, vectorizable_load, vectorizable_condition)
	(vectorizable_comparison): Likewise.
	* tree-vect-loop.c (vectorize_fold_left_reduction): Likewise.
	(vectorizable_reduction): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_is_simple_use): Add an optional
	stmt_vec_info * parameter before the optional gimple **.
	* tree-vect-stmts.c (vect_is_simple_use): Likewise.
	(process_use, vect_get_vec_def_for_operand_1): Update callers.
	(vect_get_vec_def_for_operand, vectorizable_shift): Likewise.
	* tree-vect-loop.c (vectorizable_reduction): Likewise.
	(vectorizable_live_operation): Likewise.
	* tree-vect-patterns.c (type_conversion_p): Likewise.
	(vect_look_through_possible_promotion): Likewise.
	(vect_recog_rotate_pattern): Likewise.
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (stmt_vec_info): Temporarily change from
	a typedef to a wrapper class.
	(NULL_STMT_VEC_INFO): New macro.
	(vec_info::stmt_infos): Change to vec<stmt_vec_info>.
	(stmt_vec_info::operator*): New function.
	(stmt_vec_info::operator gimple *): Likewise.
	(set_vinfo_for_stmt): Use NULL_STMT_VEC_INFO.
	(add_stmt_costs): Likewise.
	* tree-vect-loop-manip.c (iv_phi_p): Likewise.
	* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost)
	(vect_get_known_peeling_cost): Likewise.
	(vect_estimate_min_profitable_iters): Likewise.
	* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
	* tree-vect-slp.c (vect_remove_slp_scalar_calls): Likewise.
	* tree-vect-stmts.c (vect_build_gather_load_calls): Likewise.
	(vectorizable_store, free_stmt_vec_infos): Likewise.
	(new_stmt_vec_info): Change return type of xcalloc to
	_stmt_vec_info *.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::lookup_single_use): Declare.
	* tree-vectorizer.c (vec_info::lookup_single_use): New function.
	* tree-vect-loop.c (vectorizable_reduction): Use it instead of
	a single_imm_use-based sequence.
	* tree-vect-stmts.c (supportable_widening_operation): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::lookup_def): Declare.
	* tree-vectorizer.c (vec_info::lookup_def): New function.
	* tree-vect-patterns.c (vect_get_internal_def): Use it.
	(vect_widened_op_tree): Likewise.
	* tree-vect-stmts.c (vect_is_simple_use): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_operations): Likewise.
	(vectorizable_reduction): Likewise.
	(vect_valid_reduction_input_p): Take a stmt_vec_info instead
	of a gimple *.
	(vect_is_slp_reduction): Update calls accordingly.  Use
	vec_info::lookup_def.
	(vect_is_simple_reduction): Likewise
	* tree-vect-slp.c (vect_detect_hybrid_slp_1): Use vec_info::lookup_def.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::lookup_stmt): Declare.
	* tree-vectorizer.c (vec_info::lookup_stmt): New function.
	* tree-vect-loop.c (vect_determine_vf_for_stmt): Use it instead
	of vinfo_for_stmt.
	(vect_determine_vectorization_factor, vect_analyze_scalar_cycles_1)
	(vect_compute_single_scalar_iteration_cost, vect_analyze_loop_form)
	(vect_update_vf_for_slp, vect_analyze_loop_operations)
	(vect_is_slp_reduction, vectorizable_induction)
	(vect_transform_loop_stmt, vect_transform_loop): Likewise.
	* tree-vect-patterns.c (vect_init_pattern_stmt):
	(vect_determine_min_output_precision_1, vect_determine_precisions)
	(vect_pattern_recog): Likewise.
	* tree-vect-stmts.c (vect_analyze_stmt, vect_transform_stmt): Likewise.
	* config/powerpcspe/powerpcspe.c (rs6000_density_test): Likewise.
	* config/rs6000/rs6000.c (rs6000_density_test): Likewise.
	* tree-vect-slp.c (vect_detect_hybrid_slp_stmts): Likewise.
	(vect_detect_hybrid_slp_1, vect_detect_hybrid_slp_2)
	(vect_detect_hybrid_slp): Likewise.  Change the walk_stmt_info
	info field from a loop to a loop_vec_info.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (stmt_vec_info): Move typedef earlier in file.
	(vec_info::add_stmt): Declare.
	* tree-vectorizer.c (vec_info::add_stmt): New function.
	* tree-vect-data-refs.c (vect_create_data_ref_ptr): Use it.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Likewise.
	(vect_create_epilog_for_reduction, vectorizable_reduction): Likewise.
	(vectorizable_induction): Likewise.
	* tree-vect-slp.c (_bb_vec_info::_bb_vec_info): Likewise.
	* tree-vect-stmts.c (vect_finish_stmt_generation_1): Likewise.
	(vectorizable_simd_clone_call, vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
	(vect_recog_bool_pattern, vect_recog_mask_conversion_pattern)
	(vect_recog_gather_scatter_pattern): Likewise.
	(append_pattern_def_seq): Likewise.  Remove a check that is
	performed by add_stmt itself.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vectorizable_reduction): Fix an instance in
	which make_ssa_name was called with new_stmt before new_stmt
	had been created.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_valid_reduction_input_p): New function,
	split out from...
	(vect_is_slp_reduction): ...here...
	(vect_is_simple_reduction): ...and here.  Remove repetition of tests
	that are already known to be false.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_free_slp_instance): Add a final_p parameter.
	* tree-vect-slp.c (vect_free_slp_tree): Likewise.  Don't update
	STMT_VINFO_NUM_SLP_USES when it's true.
	(vect_free_slp_instance): Add a final_p parameter and pass it to
	vect_free_slp_tree.
	(vect_build_slp_tree_2): Update call to vect_free_slp_instance.
	(vect_analyze_slp_instance): Likewise.
	(vect_slp_analyze_operations): Likewise.
	(vect_slp_analyze_bb_1): Likewise.
	* tree-vectorizer.c (vec_info): Likewise.
	* tree-vect-loop.c (vect_transform_loop): Likewise.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vectorizable_reduction): Assert that the
	function is not called for second and subsequent members of
	a reduction group.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (get_initial_def_for_reduction): Move special
	cases for nested loops from here to ...
	(vect_create_epilog_for_reduction): ...here.  Only call
	vect_is_simple_use for inner-loop reductions.

2018-07-31  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/85338
	PR gcov-profile/85350
	PR gcov-profile/85372
	* profile.c (struct location_triplet): New.
	(struct location_triplet_hash): Likewise.
	(output_location): Do not output a BB that
	is already recorded for a line.
	(branch_prob): Use streamed_locations.

2018-07-31  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/85370
	* coverage.c (coverage_begin_function): Do not mark target
	clones as artificial functions.

2018-07-31  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/83813
	PR gcov-profile/84758
	PR gcov-profile/85217
	PR gcov-profile/85332
	* profile.c (branch_prob): Do not record GOTO expressions
	for GIMPLE statements which locations are already streamed.

2018-07-31  Olivier Hainque  <hainque@adacore.com>

	* gcc.c (handle_spec_function): Accept a soft_matched_part
	argument, as do_spec_1.  Pass it down to ...
	(eval_spec_function): Accept a soft_matched_part argument,
	and pass it down to ...
	(do_spec_2): Accept a soft_matched_part argument, and pass
	it down to do_spec_1.
	(do_spec_1): Pass soft_matched_part to handle_spec_function.
	(handle_braces): Update call to handle_spec_function.
	(driver::set_up_specs): Update calls to do_spec_2.
	(compare_debug_dump_opt_spec_function): Likewise.
	(compare_debug_self_opt_spec_function): Likewise.

2018-07-31  Olivier Hainque  <hainque@adacore.com>

	* common.opt (nolibc): New option.
	* doc/invoke.texi (Link Options): Document it.
	* gcc.c (LINK_GCC_C_SEQUENCE_SPEC): Honor nolibc.
	* config/alpha/linux.h: Likewise.
	* config/arc/elf.h: Likewise.
	* config/arm/uclinux-elf.h: Likewise.
	* config/arm/unknown-elf.h: Likewise.
	* config/avr/avrlibc.h: Likewise.
	* config/bfin/bfin.h: Likewise.
	* config/bfin/linux.h: Likewise.
	* config/bfin/uclinux.h: Likewise.
	* config/darwin.h: Likewise.
	* config/darwin10.h: Likewise.
	* config/darwin12.h: Likewise.
	* config/gnu-user.h: Likewise.
	* config/lm32/uclinux-elf.h: Likewise.
	* config/pa/pa-hpux11.h: Likewise.
	* config/pa/pa64-hpux.h: Likewise.
	* config/sparc/sparc.h: Likewise.

2018-07-31  Olivier Hainque  <hainque@adacore.com>

	* gcc.c (getenv_spec_function): Prepend '/' to value for allowed
	undefined variables.

2018-07-30  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/86640
	* config/arm/arm.c (arm_block_set_aligned_vect): Use gen_int_mode
	instead of GEN_INT.

2018-07-30  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* tree-ssa-forwprop.c (simplify_builtin_call): Don't create a not NUL
	terminated string literal.

2018-07-30  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/85160
	* combine.c (is_just_move): New function.
	(try_combine): Allow combining two instructions into two if neither of
	the original instructions was a move.

2018-07-30  Alexander Monakov  <amonakov@ispras.ru>

	PR target/86673
	* doc/extend.texi (Global Register Variables): Discourage use of type
	qualifiers.
	(Local Register Variables): Likewise.

2018-07-30  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86506
	* hwint.h (ceil_log2): Resync with hwint.c implementation.

2018-07-30  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/86547
	* lra-constraints.c (spill_hard_reg_in_range): When selecting the
	hard_regno, make sure no insn between `from` and `to` clobbers it.

2018-07-30  Cesar Philippidis  <cesar@codesourcery.com>
	    Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (PTX_GANG_DEFAULT): Rename to ...
	(PTX_DEFAULT_RUNTIME_DIM): ... this.
	(nvptx_goacc_validate_dims): Set default worker and gang dims to
	PTX_DEFAULT_RUNTIME_DIM.
	(nvptx_dim_limit): Ignore GOMP_DIM_WORKER.

2018-07-29  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_output_addr_vec): Align address table.
	* config/pa/pa.h (JUMP_TABLES_IN_TEXT_SECTION): Revise comment.
	* config/pa/pa32-linux.h (JUMP_TABLES_IN_TEXT_SECTION): Define.

2018-07-27  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/constraints.md (wG constraint): Delete, no longer
	used.
	* config/rs6000/predicates.md (p9_fusion_reg_operand): Rename
	predicate to reflect toc fusion has been deleted.
	(toc_fusion_mem_raw): Delete, no longer used.
	(toc_fusion_mem_wrapped): Likewise.
	* config/rs6000/rs6000-cpus.def (POWERPC_MASKS): Delete toc
	fusion mask bit.
	* config/rs6000/rs6000-protos.h (fusion_wrap_memory_address):
	Delete, no longer used.
	* config/rs6000/rs6000.c (struct rs6000_reg_addr): Delete fields
	meant to be used for toc fusion.
	(rs6000_debug_print_mode): Delete toc fusion debugging.
	(rs6000_debug_reg_global): Likewise.
	(rs6000_init_hard_regno_mode_ok): Delete setting up fields for toc
	fusion and secondary reload support that were never used.
	(rs6000_option_override_internal): Delete TOC fusion, that was only
	partially defined, and it did not work unless you also used the
	-mcmodel= switch.
	(rs6000_legitimate_address_p): Delete TOC fusion support.
	(rs6000_opt_masks): Likewise.
	(fusion_wrap_memory_address): Delete function, no longer used.
	(fusion_split_address); Delete TOC fusion support.
	* config/rs6000/rs6000.h (TARGET_TOC_FUSION_INT): Delete, no
	longer used with toc fusion being deleted.
	(TARGET_TOC_FUSION_FP): Likewise.
	* config/rs6000/rs6000.md (UNSPEC_FUSION_ADDIS): Delete TOC fusion
	UNSPEC.
	(toc fusion spliter): Delete TOC fusion support.
	(toc_fusionload_<mode>): Likewise.
	(toc_fusionload_di): Likewise.
	(fusion_gpr_load_<mode>): Delete generator function, this insn no
	longer needs to be named.  Rename predicate to delete TOC fusion.
	(fusion_gpr_<P:mode>_<GPR_FUSION:mode>_load): Likewise.
	(fusion_gpr_<P:mode>_<GPR_FUSION:mode>_store): Likewise.
	(fusion_vsx_<P:mode>_<GPR_FUSION:mode>_load): Likewise.
	(fusion_vsx_<P:mode>_<GPR_FUSION:mode>_store): Likewise.
	(p9 fusion peephole2s): Rename predicate to delete TOC fusion.

2018-07-27  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* doc/extend.texi (Basic PowerPC Built-in Functions Available on
	ISA 2.05):  Replace __uint128_t with __uint128 and __int128_t with
	__int128 in built-in function prototypes.
	(PowerPC AltiVec Built-in Functions on ISA 2.07): Likewise.
	(PowerPC AltiVec Built-in Functions on ISA 3.0): Likewise.

2018-07-27  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86696
	* tree-ssa-strlen.c (get_min_string_length): Handle all integer
	types, including enums.
	(handle_char_store): Be prepared for the above function to fail.

2018-07-26  Qing Zhao  <qing.zhao@oracle.com>

	* builtins.c (inline_expand_builtin_string_cmp): Disable inlining
	when optimization level is lower than 2 or optimize for size.

2018-07-26  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86043
	PR tree-optimization/86042
	* tree-ssa-strlen.c (handle_builtin_memcpy): Handle strict overlaps.
	(get_string_cst_length): Rename...
	(get_min_string_length): ...to this.  Add argument.
	(handle_char_store): Extend to handle multi-character stores by
	MEM_REF.
	* tree.c (initializer_zerop): Use new argument.  Handle MEM_REF.
	* tree.h (initializer_zerop): Add argument.

2018-07-26  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/86660
	* omp-low.c (scan_sharing_clauses): Don't ignore map clauses for
	declare target to variables if they have always,{to,from,tofrom} map
	kinds.

2018-07-26  Martin Liska  <mliska@suse.cz>

	PR lto/86548
	* lto-wrapper.c: Add linker_output as prefix
	for ltrans_output_file.

2018-07-26  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/85805
	* combine.c (reg_nonzero_bits_for_combine): Only use the last set
	value for hard registers if that was written in the same mode.

2018-07-26  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/86536
	* gcov.c (format_gcov): Use printf format %.*f directly
	and do not handle special values.

2018-07-25  Claudiu Zissulescu  <claziss@synopsys.com>

	* common/config/arc/arc-common.c (arc_option_optimization_table):
	Update default optimizations for size.

2018-07-25  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (movsf_insn): Add short instruction selection.
	* config/arc/constraints.md (CfZ): New constraint.
	* config/arc/fpu.md (addssf3_fpu): Use CfZ constraint.
	(subsf3_fpu): Likewise.
	(cmpsf_fpu): Likewise.
	(cmpsf_fpu_uneq): Likewise.

2018-07-25  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (compact_memory_operand_p): Check for uncached
	accesses as well.
	(arc_is_uncached_mem_p): uncached applies to both the variable and
	the pointer.

2018-07-25  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.h (ADDITIONAL_REGISTER_NAMES): Add additional
	register names.

2018-07-25  David Malcolm  <dmalcolm@redhat.com>

	* optinfo-emit-json.cc (class optrecord_json_writer): Convert
	field "m_scopes" from vec to auto_vec.

2018-07-25  Martin Liska  <mliska@suse.cz>

	* config/powerpcspe/powerpcspe-protos.h (rs6000_loop_align): Fix
	return type.

2018-07-25  Richard Biener  <rguenther@suse.de>

	PR debug/86654
	* dwarf2out.c (dwarf2out_decl): Do not handle nested functions
	special wrt context_die late.
	(gen_subprogram_die): Re-use DIEs in local scope.

2018-07-25  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86644
	* hwint.c (ceil_log2): Fix comment.  Return 0 for 0.

2018-07-25  Martin Liska  <mliska@suse.cz>

	PR middle-end/86645
	* dumpfile.c: And excluded values with TDF_ALL_VALUES.
	* dumpfile.h (enum dump_flag): Defince TDF_ALL_VALUES.

2018-07-25  Martin Liska  <mliska@suse.cz>

	PR sanitizer/79635
	* params.def: Explain ASan abbreviation and provide
	a documentation link.

2018-07-24  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86622
	PR tree-optimization/86532
	* builtins.h (string_length): Declare.
	* builtins.c (c_strlen): Correct handling of non-constant offsets.
	(check_access): Be prepared for non-constant length ranges.
	(string_length): Make extern.
	* expr.c (string_constant): Only handle the minor non-constant
	array index.  Use string_constant to compute the length of
	a generic string constant.

2018-07-24  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/86618
	* tree-vect-stmts.c (vectorizable_call): Don't take the address
	of LOOP_VINFO_MASKS (loop_vinfo) when loop_vinfo is null.

2018-07-24  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/86636
	* json.cc (json::object::set): Fix comment.  Add assertions.
	(json::array::append): Move here from json.h.  Add comment and an
	assertion.
	(json::string::string): Likewise.
	* json.h (json::array::append): Move to json.cc.
	(json::string::string): Likewise.
	* optinfo-emit-json.cc
	(optrecord_json_writer::impl_location_to_json): Assert that we
	aren't attempting to write out UNKNOWN_LOCATION, or an ad-hoc
	wrapper around it.  Expand the location once, rather than three
	times.
	(optrecord_json_writer::inlining_chain_to_json): Fix the check for
	UNKNOWN_LOCATION, to use LOCATION_LOCUS to look through ad-hoc
	wrappers.
	(optrecord_json_writer::optinfo_to_json): Likewise, in four
	places.  Fix some overlong lines.

2018-07-24  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64-simd.md
	(aarch64_<ANY_EXTEND:su><ADDSUB:optab>w<mode>): Split into...
	(aarch64_<ANY_EXTEND:su>subw<mode>): ... This...
	(aarch64_<ANY_EXTEND:su>addw<mode>): ... And this.
	(aarch64_<ANY_EXTEND:su><ADDSUB:optab>w<mode>_internal): Split into...
	(aarch64_<ANY_EXTEND:su>subw<mode>_internal): ... This...
	(aarch64_<ANY_EXTEND:su>addw<mode>_internal): ... And this.
	(aarch64_<ANY_EXTEND:su><ADDSUB:optab>w2<mode>_internal): Split into...
	(aarch64_<ANY_EXTEND:su>subw2<mode>_internal): ... This...
	(aarch64_<ANY_EXTEND:su>addw2<mode>_internal): ... And this.

2018-07-24  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/86627
	* expmed.c (expand_divmod): Punt if d == HOST_WIDE_INT_MIN
	and size > HOST_BITS_PER_WIDE_INT.  For size > HOST_BITS_PER_WIDE_INT
	and abs_d == d, do the power of two handling if profitable.

2018-07-24  Richard Biener  <rguenther@suse.de>

	* match.pd: Add BIT_FIELD_REF canonicalizations.

2018-07-23  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR c/86617
	* genmatch.c (dt_operand::gen_match_op): Avoid folding volatile values.

2018-07-23  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* gimple-fold.c (gimple_fold_builtin_printf): Don't create a not NUL
	terminated STRING_CST object.

2018-07-23  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	hsa-dump.c (dump_hsa_symbol): Avoid out of scope access to buf.

2018-07-23  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-p8swap.c (rtx_is_swappable_p): Adjust.
	* config/rs6000/rs6000-protos.h (rs6000_split_v4si_init): Delete.
	* config/rs6000/rs6000.c (rs6000_expand_vector_init): Always force
	the elements into a register.
	(rs6000_split_v4si_init_di_reg): Delete.
	(rs6000_split_v4si_init): Delete.
	* config/rs6000/vsx.md (unspec): Delete UNSPEC_VSX_VEC_INIT.
	(vsx_init_v4si): Rewrite as a define_expand.

2018-07-23  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (splitters for rldimi and rlwimi with the
	zero_extend argument from memory): New.

2018-07-22  Martin Sebor  <msebor@redhat.com>

	PR bootstrap/86621
	* gimple-ssa-warn-alloca.c (alloca_call_type_by_arg): Avoid
	diagnosing calls with unknown arguments unless -Walloca-larger-than
	is restricted to less than PTRDIFF_MAX bytes.

2018-07-22  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/gcov.texi (Invoking Gcov): Editorial changes.

2018-07-20  David Malcolm  <dmalcolm@redhat.com>

	* pretty-print.c (text_info::set_location): Remove redundant
	"line_table" parameter from call to rich_location::set_range.

2018-07-20  Martin Sebor  <msebor@redhat.com>

	PR middle-end/82063
	* builtins.c (expand_builtin_alloca): Adjust.
	* calls.c (alloc_max_size): Simplify.
	* cgraphunit.c (cgraph_node::expand): Adjust.
	* common.opt (larger_than_size, warn_frame_larger_than): Remove
	variables.
	(frame_larger_than_size): Same.
	(-Wframe-larger-than, -Wlarger-than, -Wstack-usage): Change options
	to take a HOST_WIDE_INT argument and accept a byte-size suffix.
	Initialize.
	* doc/invoke.texi (GCC Command Options): Document option arguments.
	Explain byte-size arguments and suffixes.
	(-Wvla-larger-than, -Wno-alloc-size-larger-than): Update.
	(-Wno-alloca-larger-than, -Wno-vla-larger-than): Same.
	(-Wframe-larger-than, -Wlarger-than, -Wstack-usage): Same.
	* doc/options.texi (UInteger): Expand.
	(Host_Wide_Int, ByteSize): Document new properties.
	* final.c (final_start_function_1): Include sizes in an error message.
	* function.c (frame_offset_overflow): Same.
	* gimple-ssa-warn-alloca.c (pass_walloca::gate): Adjust.
	(alloca_call_type_by_arg): Change function argument to HOST_WIDE_INT.
	Diagnose unbounded alloca calls only for limits of less than
	PTRDIFF_MAX.
	(alloca_call_type): Adjust.  Diagnose possibly out-of-bounds alloca
	calls and VLA size only for limits of less than	PTRDIFF_MAX.  Same
	for alloca(0).
	(pass_walloca::execute): Adjust.  Diagnose alloca calls in loops
	only for limits of less than PTRDIFF_MAX.
	* langhooks-def.h (lhd_handle_option): Change function argument
	to HOST_WIDE_INT.
	* langhooks.c (lhd_handle_option): Same.
	* langhooks.h (handle_option): Same.
	* opt-functions.awk (switch_bit_fields): Handle Host_Wide_Int and
	ByteSize flags.
	(var_type, var_type_struct): Same.
	(var_set): Handle ByteSize flag.
	* optc-gen.awk: Add comments to output to ease debugging.  Make
	use of HOST_WIDE_INT where appropriate.
	* opts-gen-save.awk:  Use %lx to format unsigned long.
	* opth-gen.awk: Change function argument to HOST_WIDE_INT.
	* opts-common.c (integral_argument): Return HOST_WIDE_INT and add
	arguments.  Parse bytes-size suffixes.
	(enum_arg_to_value): Change function argument to HOST_WIDE_INT.
	(enum_value_to_arg): Same.
	(decode_cmdline_option): Handle cl_host_wide_int.  Adjust.
	(handle_option): Adjust.
	(generate_option): Change function argument to HOST_WIDE_INT.
	(cmdline_handle_error): Adjust.
	(read_cmdline_option): Change function argument to HOST_WIDE_INT.
	(set_option): Change function argument to HOST_WIDE_INT.
	(option_enabled): Handle cl_host_wide_int.
	(get_option_state): Handle CLVC_SIZE.
	(control_warning_option): Same.
	* opts.c (common_handle_option): Change function argument to
	HOST_WIDE_INT.  Remove handling of OPT_Walloca_larger_than_ and
	OPT_Wvla_larger_than_.
	* opts.h (enum cl_var_type): Add an enumerator.
	* stor-layout.c (layout_decl): Print a more meaningful warning.
	* toplev.c (output_stack_usage): Adjust.

2018-07-20  Qing Zhao  <qing.zhao@oracle.com>

	* builtins.c (expand_builtin_memcmp): Delete the last parameter for
	call to inline_expand_builtin_string_cmp.
	(expand_builtin_strcmp): Likewise.
	(expand_builtin_strncmp): Likewise.
	(inline_string_cmp): Delete the last parameter, change char_type_node
	to unsigned_char_type_node for strcmp/strncmp, add conversions to the
	two operands.
	(inline_expand_builtin_string_cmp): Delete the last parameter, give up
	the inlining expansion on target where the type of the call has same or
	narrower precision than unsigned char.

2018-07-20  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (OBJS): Add json.o and optinfo-emit-json.o.
	(CFLAGS-optinfo-emit-json.o): Define TARGET_NAME.
	* common.opt (fsave-optimization-record): New option.
	* coretypes.h (struct kv_pair): Move here from dumpfile.c.
	* doc/invoke.texi (-fsave-optimization-record): New option.
	* dumpfile.c: Include "optinfo-emit-json.h".
	(struct kv_pair): Move to coretypes.h.
	(optgroup_options): Make non-static.
	(dump_context::end_scope): Call
	optimization_records_maybe_pop_dump_scope.
	* dumpfile.h (optgroup_options): New decl.
	* json.cc: New file.
	* json.h: New file.
	* optinfo-emit-json.cc: New file.
	* optinfo-emit-json.h: New file.
	* optinfo.cc: Include "optinfo-emit-json.h".
	(optinfo::emit): Call optimization_records_maybe_record_optinfo.
	(optinfo_enabled_p): Check optimization_records_enabled_p.
	(optinfo_wants_inlining_info_p): Likewise.
	* optinfo.h: Update comment.
	* profile-count.c (profile_quality_as_string): New function.
	* profile-count.h (profile_quality_as_string): New decl.
	(profile_count::quality): New accessor.
	* selftest-run-tests.c (selftest::run_tests): Call json_cc_tests
	and optinfo_emit_json_cc_tests.
	* selftest.h (selftest::json_cc_tests): New decl.
	(selftest::optinfo_emit_json_cc_tests): New decl.
	* toplev.c: Include "optinfo-emit-json.h".
	(compile_file): Call optimization_records_finish.
	(do_compile): Call optimization_records_start.
	* tree-ssa-live.c: Include optinfo.h.
	(remove_unused_scope_block_p): Retain inlining information if
	optinfo_wants_inlining_info_p returns true.

2018-07-20  Richard Biener  <rguenther@suse.de>

	PR debug/86585
	* dwarf2out.c (dwarf2out_die_ref_for_decl): Test in_lto_p
	to cover -flto-partition=none.

2018-07-20  Martin Liska  <mliska@suse.cz>

	* tree.h (DECL_LOCATION_RANGE): Remove unused macro.
	(get_decl_source_range): Remove unused function.

2018-07-20  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.h (struct vn_nary_op_s): Add next member.
	(struct vn_phi_s): Likewise.
	(struct vn_reference_s): Likewise.
	* tree-ssa-sccvn.c (vn_nary_op_hasher::equal): Add shortcut
	for searching the slot of an entry known to be in the hash itself.
	(vn_phi_hasher::equal): Likewise.
	(vn_reference_hasher::equal): Likewise.
	(last_inserted_ref, last_inserted_phi, last_inserted_nary): New
	globals.
	(optimistic_info, current_info): Remove, keeping only valid_info.
	(vn_reference_lookup_1): Remove fallback lookup.
	(vn_reference_lookup_2): Likewise.
	(vn_nary_op_lookup_1): Likewise.
	(vn_phi_lookup): Likewise.
	(vn_nary_build_or_lookup_1): Make sure to not chain the built
	hash element.
	(vn_reference_insert): Adjust, chain the inserted hash element
	at last_inserted_ref.
	(vn_reference_insert_pieces): Likewise.
	(visit_reference_op_call): Likewise.
	(vn_nary_op_insert_into): Chain the inserted hash element at
	last_inserted_nary.
	(vn_nary_op_insert_pieces): Adjust.
	(vn_nary_op_insert): Likewise.
	(vn_nary_op_insert_stmt): Likewise.
	(vn_phi_insert): Adjust, chain the inserted hash element at
	last_inserted_phi.
	(process_scc): Remove clearing and copying the optimistic
	table.  Instead remove elements inserted during an optimistic
	iteration from the single table we maintain.
	(init_scc_vn): Adjust.
	(free_scc_vn): Likewise.
	(sccvn_dom_walker::record_cond): Likewise.
	(sccvn_dom_walker::after_dom_children): Likewise.

2018-07-19  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84047
	PR tree-optimization/83776
	* tree-vrp.c (vrp_prop::check_mem_ref): New function.
	(check_array_bounds): Call it.

2018-07-19  Martin Sebor  <msebor@redhat.com>

	* align.h (align_flags): Use member initialization.

2018-07-19  David Malcolm  <dmalcolm@redhat.com>

	* Makefile.in (OBJS): Add optinfo.o.
	* coretypes.h (class symtab_node): New forward decl.
	(struct cgraph_node): New forward decl.
	(class varpool_node): New forward decl.
	* dump-context.h: New file.
	* dumpfile.c: Include "optinfo.h", "dump-context.h", "cgraph.h",
	"tree-pass.h".
	(refresh_dumps_are_enabled): Use optinfo_enabled_p.
	(set_dump_file): Call dumpfile_ensure_any_optinfo_are_flushed.
	(set_alt_dump_file): Likewise.
	(dump_context::~dump_context): New dtor.
	(dump_gimple_stmt): Move implementation to...
	(dump_context::dump_gimple_stmt): ...this new member function.
	Add the stmt to any pending optinfo, creating one if need be.
	(dump_gimple_stmt_loc): Move implementation to...
	(dump_context::dump_gimple_stmt_loc): ...this new member function.
	Start a new optinfo and add the stmt to it.
	(dump_gimple_expr): Move implementation to...
	(dump_context::dump_gimple_expr): ...this new member function.
	Add the stmt to any pending optinfo, creating one if need be.
	(dump_gimple_expr_loc): Move implementation to...
	(dump_context::dump_gimple_expr_loc): ...this new member function.
	Start a new optinfo and add the stmt to it.
	(dump_generic_expr): Move implementation to...
	(dump_context::dump_generic_expr): ...this new member function.
	Add the tree to any pending optinfo, creating one if need be.
	(dump_generic_expr_loc): Move implementation to...
	(dump_context::dump_generic_expr_loc): ...this new member
	function.  Add the tree to any pending optinfo, creating one if
	need be.
	(dump_printf): Move implementation to...
	(dump_context::dump_printf_va): ...this new member function.  Add
	the text to any pending optinfo, creating one if need be.
	(dump_printf_loc): Move implementation to...
	(dump_context::dump_printf_loc_va): ...this new member function.
	Start a new optinfo and add the stmt to it.
	(dump_dec): Move implementation to...
	(dump_context::dump_dec): ...this new member function.  Add the
	value to any pending optinfo, creating one if need be.
	(dump_context::dump_symtab_node): New member function.
	(dump_context::get_scope_depth): New member function.
	(dump_context::begin_scope): New member function.
	(dump_context::end_scope): New member function.
	(dump_context::ensure_pending_optinfo): New member function.
	(dump_context::begin_next_optinfo): New member function.
	(dump_context::end_any_optinfo): New member function.
	(dump_context::s_current): New global.
	(dump_context::s_default): New global.
	(dump_scope_depth): Delete global.
	(dumpfile_ensure_any_optinfo_are_flushed): New function.
	(dump_symtab_node): New function.
	(get_dump_scope_depth): Reimplement in terms of dump_context.
	(dump_begin_scope): Likewise.
	(dump_end_scope): Likewise.
	(selftest::temp_dump_context::temp_dump_context): New ctor.
	(selftest::temp_dump_context::~temp_dump_context): New dtor.
	(selftest::verify_item): New function.
	(ASSERT_IS_TEXT): New macro.
	(ASSERT_IS_TREE): New macro.
	(ASSERT_IS_GIMPLE): New macro.
	(selftest::test_capture_of_dump_calls): New test.
	(selftest::dumpfile_c_tests): Call it.
	* dumpfile.h (dump_printf, dump_printf_loc, dump_basic_block)
	(dump_generic_expr_loc, dump_generic_expr, dump_gimple_stmt_loc)
	(dump_gimple_stmt, dump_dec): Gather these related decls and add a
	descriptive comment.
	(dump_function, print_combine_total_stats, enable_rtl_dump_file)
	(dump_node, dump_bb): Move these unrelated decls.
	(class dump_manager): Add leading comment.
	* optinfo.cc: New file.
	* optinfo.h: New file.

2018-07-19  Michael Collison  <michael.collison@arm.com>
	    Richard Henderson <rth@redhat.com>

	* config/aarch64/aarch64.md (subv<GPI>4, usubv<GPI>4): New patterns.
	(subti): Handle op1 zero.
	(subvti4, usub4ti4): New.
	(*sub<GPI>3_compare1_imm): New.
	(sub<GPI>3_carryinCV): New.
	(*sub<GPI>3_carryinCV_z1_z2, *sub<GPI>3_carryinCV_z1): New.
	(*sub<GPI>3_carryinCV_z2, *sub<GPI>3_carryinCV): New.

2018-07-19  Michael Collison  <michael.collison@arm.com>
	    Richard Henderson <rth@redhat.com>

	* config/aarch64/aarch64.md: (addv<GPI>4, uaddv<GPI>4): New.
	(addti3): Create simpler code if low part is already known to be 0.
	(addvti4, uaddvti4): New.
	(*add<GPI>3_compareC_cconly_imm): New.
	(*add<GPI>3_compareC_cconly): New.
	(*add<GPI>3_compareC_imm): New.
	(*add<GPI>3_compareC): Rename from add<GPI>3_compare1; do not
	handle constants within this pattern..
	(*add<GPI>3_compareV_cconly_imm): New.
	(*add<GPI>3_compareV_cconly): New.
	(*add<GPI>3_compareV_imm): New.
	(add<GPI>3_compareV): New.
	(add<GPI>3_carryinC, add<GPI>3_carryinV): New.
	(*add<GPI>3_carryinC_zero, *add<GPI>3_carryinV_zero): New.
	(*add<GPI>3_carryinC, *add<GPI>3_carryinV): New.
	((*add<GPI>3_compareC_cconly_imm): Replace 'ne' operator
	with 'comparison' operator.
	(*add<GPI>3_compareV_cconly_imm): Ditto.
	(*add<GPI>3_compareV_cconly): Ditto.
	(*add<GPI>3_compareV_imm): Ditto.
	(add<GPI>3_compareV): Ditto.
	(add<mode>3_carryinC): Ditto.
	(*add<mode>3_carryinC_zero): Ditto.
	(*add<mode>3_carryinC): Ditto.
	(add<mode>3_carryinV): Ditto.
	(*add<mode>3_carryinV_zero): Ditto.
	(*add<mode>3_carryinV): Ditto.

2018-07-19  Michael Collison  <michael.collison@arm.com>
	    Richard Henderson <rth@redhat.com>

	* config/aarch64/aarch64-modes.def (CC_V): New.
	* config/aarch64/aarch64-protos.h
	(aarch64_addti_scratch_regs): Declare
	(aarch64_subvti_scratch_regs): Declare.
	(aarch64_expand_subvti): Declare.
	(aarch64_gen_unlikely_cbranch): Declare
	* config/aarch64/aarch64.c (aarch64_select_cc_mode): Test
	for signed overflow using CC_Vmode.
	(aarch64_get_condition_code_1): Handle CC_Vmode.
	(aarch64_gen_unlikely_cbranch): New function.
	(aarch64_addti_scratch_regs): New function.
	(aarch64_subvti_scratch_regs): New function.
	(aarch64_expand_subvti): New function.

2018-07-19  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/aarch64/aarch64-option-extensions.def: New entry for profile
	extension.
	* config/aarch64/aarch64.h (AARCH64_FL_PROFILE): New.
	* doc/invoke.texi (aarch64-feature-modifiers): New entry for profile
	extension.

2018-07-19  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/83009
	* config/aarch64/predicates.md (aarch64_mem_pair_lanes_operand): Make
	address check not strict.

2018-07-19  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/aarch64/aarch64-simd.md (aarch64_simd_mov<VQ:mode>): Replace
	Umq with Umn.
	(store_pair_lanes<mode>): Likewise.
	* config/aarch64/aarch64-protos.h (aarch64_addr_query_type): Add new
	enum value 'ADDR_QUERY_LDP_STP_N'.
	* config/aarch64/aarch64.c (aarch64_addr_query_type): Likewise.
	(aarch64_print_address_internal): Add declaration.
	(aarch64_print_ldpstp_address): Remove.
	(aarch64_classify_address): Adapt mode for 'ADDR_QUERY_LDP_STP_N'.
	(aarch64_print_operand): Change printing of 'y'.
	* config/aarch64/predicates.md (aarch64_mem_pair_lanes_operand): Use
	new enum value 'ADDR_QUERY_LDP_STP_N', don't hardcode mode and use
	'true' rather than '1'.
	* config/aarch64/constraints.md (Uml): Likewise.
	(Uml): Rename to Umn.
	(Umq): Remove.

2018-07-19  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.h (struct vn_phi_s): Make phiargs member
	a trailing array.
	* tree-ssa-sccvn.c: Remove alloc-pool.h use.
	(vn_phi_hasher): Derive from nofree_ptr_hash and remove remove method.
	(vn_reference_hasher): Likewise.
	(struct vn_tables_s): Remove obstack and alloc-pool members.
	(vn_tables_obstack, vn_tables_insert_obstack): New global obstacks.
	(vn_nary_build_or_lookup_1): Manually build in vn_tables_insert_obstack.
	(vn_reference_insert): Allocate from obstack instead of from alloc-pool.
	(vn_reference_insert_pieces): Likewise.
	(alloc_vn_nary_op_noinit): Adjust.
	(vn_nary_op_insert_stmt): Allocate phiargs in-place.
	(vn_phi_eq): Adjust.
	(shared_lookup_phiargs): Remove.
	(vn_phi_lookup): Allocate temporary vn_phi_s on the stack.
	(vn_phi_insert): Allocate from obstack instead of from alloc-pool.
	(visit_reference_op_call): Likewise.
	(copy_nary, copy_phi, copy_reference): Remove.
	(process_scc): Rewind the obstack when iterating.  Do not
	copy the elements to valid_info but just move them from one
	hashtable to the other.
	(allocate_vn_table): Adjust.
	(free_vn_table): Likewise.
	(init_scc_vn): Likewise.
	(free_scc_vn): Likewise.

2018-07-19  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/86560
	* config/i386/i386.c (rest_of_insert_endbranch): Lookup
	indirect_return as function type attribute.
	(ix86_attribute_table): Change indirect_return to function
	type attribute.
	* doc/extend.texi: Update indirect_return attribute.

2018-07-19  Aldy Hernandez  <aldyh@redhat.com>

	* wide-int.h (widest2_int): New.
	* gimple-fold.c (arith_overflowed_p): Use it.
	* tree.h (widest2_int_cst): New.
	* tree-vrp.c (wide_int_binop_overflow): Rename from
	vrp_int_const_binop.
	Rewrite to work on trees.
	(extract_range_from_multiplicative_op_1): Abstract code to...
	(wide_int_range_min_max): ...here.
	(wide_int_range_cross_product): ...and here.
	(extract_range_from_binary_expr_1): Abstract overflow code to...
	(wide_int_range_mult_wrapping): ...here.
	* tree-vrp.h (wide_int_range_cross_product): New.
	(wide_int_range_mult_wrapping): New.

2018-07-19  Andrew Senkevich  <andrew.senkevich@intel.com>
	    Julia Koval  <julia.koval@intel.com>

	* config/i386/x86-tune-costs.h (skylake_memcpy,
	skylake_memset): Replace rep_prefix with unrolling for size 512.

2018-07-18  Kugan Vivekanandarajah  <kuganv@linaro.org>

	PR middle-end/86544
	* tree-ssa-phiopt.c (cond_removal_in_popcount_pattern): Handle
	comparision with EQ_EXPR in last stmt.

2018-07-18  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* doc/extend.texi (PowerPC AltiVec Built-in Functions): Rename
	this subsection to "PowerPC AltiVec/VSX Built-in Functions".
	(PowerPC AltiVec/VSX Built-in Functions): New name for subsection
	previously known as "PowerPC AltiVec Built-in Functions".  Move
	some material to new subsubsections "PowerPC AltiVec Built-in
	Functions on ISA 2.06" and "PowerPC AltiVec Built-in Functions on
	ISA 2.07".
	(PowerPC Altivec Built-in Functions on ISA 2.05): New subsubsection.
	(PowerPC Altivec Built-in Functions on ISA 2.06): Likewise.
	(PowerPC Altivec Built-in Functions on ISA 2.07): Likewise.
	(PowerPC Altivec Built-in Functions on ISA 3.0): Likewise.

2018-07-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86557
	* tree-vect-patterns.c (vect_recog_divmod_pattern): Also handle
	EXACT_DIV_EXPR.

2018-07-18  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_function_profiler): Generate CFI.

2018-07-17  Jeff Law  <law@redhat.com>

	* config/arm/arm.c (get_label_padding): Update for recent
	changes to label_to_alignment.

	PR tree-optimization/86010
	* tree-ssa-dse.c (compute_trims): Fix typo/thinko.

	* config/mips/mips.c (vr4130_align_insns): Update for recent
	changes to label_to_alignment.

	* config/frv/frv.c (frv_label_align): Update for recent changes
	to label_to_alignment.

	* config/nios2/nios2.c (nios2_label_align): Update for recent
	changes which dropped ALIGN_LABELS_LOG.

2018-07-17  Andreas Schwab  <schwab@linux-m68k.org>

	* config/m68k/m68k.md (umulsi3_highpart+1, const_umulsi3_highpart)
	(smulsi3_highpart+1, const_smulsi3_highpart): Add CC_STATUS_INIT.

2018-07-17  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_label_align): Use align_labels instead of
	deprecated align_labels_log.

2018-07-17  Richard Biener  <rguenther@suse.de>

	PR lto/86456
	* dwarf2out.c (init_sections_and_labels): Always generate
	a debug_line_str_section for early LTO debug.
	(dwarf2out_finish): Reset debug_line_str_hash output early.
	Bump counter for extra dwarf5 .debug_loc labels to not conflict
	with fat LTO part.
	(dwarf2out_early_finish): Output debug_line_str.

2018-07-17  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/s390.c (preferred_la_operand_p): Do not use LA with
	index register on z196 or later.

2018-07-17  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/s390.c (s390_default_align): Set default function
	alignment to 16.
	(s390_override_options_after_change): Call s390_default align.
	(s390_option_override_internal): Call s390_default_align.
	(TARGET_OVERRIDE_OPTIONS_AFTER_CHANGE): Define.

2018-07-17  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/86542
	* omp-low.c (create_task_copyfn): Copy over also fields corresponding
	to _looptemp_ clauses, other than the first two.

2018-07-17  Martin Liska  <mliska@suse.cz>

	* opts.c: Do not enable OPT_falign_* for -Os.

2018-07-17  Martin Liska  <mliska@suse.cz>

	* align.h (MAX_CODE_ALIGN): New.
	(MAX_CODE_ALIGN_VALUE): New.
	* common/config/i386/i386-common.c (ix86_handle_option):
	(MAX_CODE_ALIGN): Moved to align.h.
	* final.c (MAX_CODE_ALIGN): Likewise.
	* opts.c (parse_and_check_align_values):
	(MAX_CODE_ALIGN): Likewise.
	(MAX_CODE_ALIGN_VALUE): Likewise.

2018-07-17  Martin Liska  <mliska@suse.cz>

	* config/i386/att.h (ASM_OUTPUT_ALIGN): Fix spacing
	in order to fulfil coding style.
	* config/i386/cygming.h (ASM_OUTPUT_ALIGN): Likewise.
	* config/i386/gas.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Likewise.
	* config/i386/x86-64.h (ASM_OUTPUT_MAX_SKIP_PAD): Likewise.
	* config/iq2000/iq2000.h (ASM_OUTPUT_ALIGN): Likewise.
	* config/pa/pa.h (ASM_OUTPUT_ALIGN): Likewise.
	* config/sparc/sol2.h (ASM_OUTPUT_ALIGN_WITH_NOP): Likewise.
	* config/sparc/sparc.h (ASM_OUTPUT_ALIGN): Likewise.
	* config/visium/visium.h (ASM_OUTPUT_ALIGN): Likewise.
	(ASM_OUTPUT_MAX_SKIP_ALIGN): Likewise.

2018-07-17  Martin Liska  <mliska@suse.cz>

	* align.h: New file.
	* config/alpha/alpha.c (alpha_align_insns_1): Use align_functions
	directly.
	* config/i386/i386.c (ix86_avoid_jump_mispredicts): Use new return type
	align_flags of label_to_alignment.
	* config/m32r/m32r.h (LOOP_ALIGN): Wrap returned values into
	align_flags class.
	* config/m68k/m68k.c: Do not use removed align_labels_value and
	align_loops_value.
	* config/nds32/nds32.h (JUMP_ALIGN): Wrap result into align_flags class.
	(LOOP_ALIGN): Likewise.
	(LABEL_ALIGN): Likewise.
	* config/powerpcspe/powerpcspe.c (TARGET_ASM_LOOP_ALIGN_MAX_SKIP):
	Remove not used macro.
	(rs6000_loop_align): Change return type to align_flags.
	(rs6000_loop_align_max_skip): Remove.
	* config/rs6000/rs6000-protos.h (rs6000_loop_align):
	Change return type to align_flags.
	* config/rs6000/rs6000.c (TARGET_ASM_LOOP_ALIGN_MAX_SKIP):
	Remove not used macro.
	(rs6000_loop_align):  Change return type to align_flags.
	(rs6000_loop_align_max_skip): Remove.
	* config/rx/rx.h (JUMP_ALIGN): Wrap integer values
	* config/rx/rx-protos.h (rx_align_for_label): Make it
	static function.
	* config/rx/rx.c (rx_align_for_label): Change return type
	to align_flags.
	(rx_max_skip_for_label): Remove TARGET_ASM_*_ALIGN_MAX_SKIP
	macro definitions.
	into align_flags class.
	(LABEL_ALIGN): Likewise.
	(LOOP_ALIGN): Likewise.
	* config/s390/s390.c (s390_label_align): Use align_flags
	class member.
	(s390_asm_output_function_label): Likewise.
	* config/sh/sh.c (sh_override_options_after_change):
	Use align_flags class directly without macros.
	(find_barrier): Likewise.
	(barrier_align): Likewise.
	(sh_loop_align): Likewise.
	* config/spu/spu.c (spu_option_override):
	Use align_flags_tuple::get_value instead of removed macros.
	(spu_sched_init): Likewise.
	* config/spu/spu.h (GTY): Likewise.
	* config/visium/visium.c (visium_option_override):
	Set "8" as default secondary alignment.
	* config/visium/visium.h (SUBALIGN_LOG): Define to 3
	in order to guarantee secondary alignment of 8.
	* coretypes.h: Include align.h header file.
	* doc/tm.texi: Remove TARGET_ASM_JUMP_ALIGN_MAX_SKIP,
	TARGET_ASM_LOOP_ALIGN_MAX_SKIP, TARGET_ASM_LABEL_ALIGN_MAX_SKIP
	and TARGET_ASM_LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP macros.
	* doc/tm.texi.in: Likewise.
	* final.c (struct label_alignment): Remove not used structure.
	(LABEL_ALIGN): Change type to align_flags.
	(LOOP_ALIGN): Likewise.
	(JUMP_ALIGN): Likewise.
	(default_loop_align_max_skip): Remove.
	(default_label_align_max_skip): Likewise.
	(default_jump_align_max_skip): Likewise.
	(default_label_align_after_barrier_max_skip):
	(LABEL_TO_ALIGNMENT): Change to access label_align vector.
	(LABEL_TO_MAX_SKIP): Remove.
	(label_to_alignment): Return align_flags type instead of integer.
	(label_to_max_skip): Remove.
	(align_fuzz): Use align_flags type.
	(compute_alignments): Use align_flags type and use align_flags::max
	to combine multiple alignments.
	(grow_label_align): Grow vec instead of C array.
	(update_alignments): Assign just LABEL_TO_ALIGNMENT.
	(shorten_branches):  Use align_flags type and use align_flags::max
	to combine multiple alignments.
	(final_scan_insn_1): Remove usage of secondary alignment that comes
	from label alignment, but instead use proper secondary alignment
	which is computed in grow_label_align.
	* flags.h (struct align_flags_tuple): Move to align.h.
	(struct align_flags): Likewise.
	(state_align_loops): Rename to align_loops.
	(state_align_jumps): Rename to align_jumps.
	(state_align_labels): Rename to align_labels.
	(state_align_functions): Rename to align_functions.
	(align_loops_log): Remove.
	(align_jumps_log): Remove.
	(align_labels_log): Remove.
	(align_functions_log): Remove.
	(align_loops_max_skip): Remove.
	(align_jumps_max_skip): Remove.
	(align_labels_max_skip): Remove.
	(align_functions_max_skip): Remove.
	(align_loops_value): Remove.
	(align_jumps_value): Remove.
	(align_labels_value): Remove.
	(align_functions_value): Remove.
	* output.h (label_to_alignment): Change return type to align_flags.
	(label_to_max_skip): Remove.
	* target.def: Remove loop_align_max_skip, label_align_max_skip,
	jump_align_max_skip macros.
	* targhooks.h (default_loop_align_max_skip): Remove.
	(default_label_align_max_skip): Likewise.
	(default_jump_align_max_skip): Likewise.
	(default_label_align_after_barrier_max_skip): Remove.
	* toplev.c (read_log_maxskip): Use ::normalize function.
	(parse_N_M): Remove not used argument and also call ::normalize.
	(parse_alignment_opts): Do not pass unused arguments.
	* varasm.c (assemble_start_function): Use directly align_functions
	instead of removed macros.
	* system.h: Do not poison removed macros.

2018-07-17  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/86539
	* gimplify.c (gimplify_omp_for): Ensure taskloop firstprivatized init
	and cond temporaries don't have reference type if iterator has
	pointer type.  For init use &for_pre_body instead of pre_p if
	for_pre_body is non-empty.

2018-07-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (trunc<mode>sf2): Expand truncates of
	double-double modes to SFmode directly directly.
	(trunc<mode>sf2_fprs): Delete.

2018-07-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (init_float128_ibm): Use the correct names
	for conversions between IFmode and the decimal floating point modes.
	(init_float128_ieee): Use the correct names for conversions between
	KFmode and the decimal floating point modes.

2018-07-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (init_float128_ibm): Use more correct names
	for the conversions between TDmode and IFmode.
	(init_float128_ieee): Use more correct names for the conversions
	between TDmode and KFmode.

2018-07-16  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/86526
	* builtins.c (expand_builtin_memcmp): Formatting fixes.
	(inline_expand_builtin_string_cmp): Likewise.
	(inline_string_cmp): Likewise.  Use c_readstr instead of
	builtin_memcpy_read_str.  Add unit_mode temporary.

2018-07-16  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR middle-end/86528
	* builtins.c (check_access): Bail out if range[0] is no INTEGER_CST.
	* expr.c (string_constant): Fix the element size of ARRAY_TYPE.

2018-07-16  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* doc/extend.texi (PowerPC AltiVec Built-in Functions):
	Alphabetize prototypes of built-in functions, separating out
	built-in functions that are listed in this section but should be
	described elsewhere.

2018-07-16  Uros Bizjak  <ubizjak@gmail.com>

	PR target/86511
	* expmed.c (emit_store_flag): Do not emit setcc followed by a
	conditional move when trapping comparison was split to a
	non-trapping one (and vice versa).

2018-07-16  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_function_profiler): Generate nops
	instead of profiler call sequences.
	* config/s390/s390.opt: Add the new option.

2018-07-16  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_function_profiler): Generate
	__mcount_loc section.
	* config/s390/s390.opt: Add the new option.

2018-07-16  Ilya Leoshkevich  <iii@linux.ibm.com>

	* common.opt: Add the new warning.
	* config/s390/s390.c (s390_function_profiler): Emit "brasl
	%r0,__fentry__" when -mfentry is specified.
	(s390_option_override_internal): Disallow -mfentry for 31-bit
	CPUs.
	* config/s390/s390.opt: Add the new option.

2018-07-16  Richard Biener  <rguenther@suse.de>

	PR lto/86523
	* dwarf2out.c (dwarf2out_register_external_die): Assign DIE parents
	for function-local FUNCTION_DECL and RESULT_DECL immediately.

2018-07-16  Martin Liska  <mliska@suse.cz>

	PR ipa/86529
	* ipa-pure-const.c (malloc_candidate_p): Revert ::get
	to ::get_create.

2017-07-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arcHS.md: Update ARCHS scheduling rules.

2017-07-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-arch.h (arc_tune_attr): Add new tune parameters
	for ARCHS4x.
	* config/arc/arc-cpus.def (hs4x): New cpu.
	(hs4xd): Likewise.
	* config/arc/arc-tables.opt: Regenerate.
	* config/arc/arc.c (arc_sched_issue_rate): New function.
	(TARGET_SCHED_ISSUE_RATE): Define.
	(TARGET_SCHED_EXPOSED_PIPELINE): Likewise.
	* config/arc/arc.md (attr type): Add fpu_fuse, fpu_sdiv, fpu_ddiv,
	fpu_cvt.
	(attr tune): Add ARCHS4x tune values.
	(attr tune_dspmpy): Define.
	(*tst): Correct instruction type.
	* config/arc/arcHS.md: Don't use this automaton for ARCHS4x cpus.
	* config/arc/arcHS4x.md: New file.
	* config/arc/fpu.md: Update instruction type attributes.
	* config/arc/t-multilib: Regenerate.

2018-07-16  Tom de Vries  <tdevries@suse.de>

	PR debug/86455
	* var-tracking.c (vt_initialize): Fix pre_dec handling.

2018-07-16  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config/aarch64/atomics.md (aarch64_store_execlusive<mode>): Add
	early clobber.

2018-07-16  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/86514
	* tree-ssa-reassoc.c (init_range_entry) <CASE_CONVERT>: Return for a
	conversion to a boolean type from a type with greater precision.

2018-07-16  Tom de Vries  <tdevries@suse.de>

	* var-tracking.c (vt_initialize): Print adjusted insn slim if
	dump_flags request TDF_SLIM.

2018-07-16  Aldy Hernandez  <aldyh@redhat.com>

	* fold-const.c (int_const_binop_1): Abstract...
	(wide_int_binop): ...wide int code here.
	(poly_int_binop): ...poly int code here.
	Abstract the rest of int_const_binop_1 into int_const_binop.
	* fold-const.h (wide_int_binop): New.
	* tree-vrp.c (vrp_int_const_binop): Call wide_int_binop.
	Remove useless PLUS/MINUS_EXPR case.
	(zero_nonzero_bits_from_vr): Move wide int code...
	(zero_nonzero_bits_from_bounds): ...here.
	(extract_range_from_binary_expr_1): Move mask optimization code...
	(range_easy_mask_min_max): ...here.
	* tree-vrp.h (zero_nonzero_bits_from_bounds): New.
	(range_easy_mask_min_max): New.

2018-07-15  Jeff Law  <law@redhat.com>

	PR target/85993
	* config/sh/sh.c (output_mi_thunk): Remove dead conditional
	block.

2018-07-14  Jim Wilson  <jimw@sifive.com>

	* config/riscv/linux.h (TARGET_ASM_FILE_END): New.

2018-07-14  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/pdp11.c (pdp11_rtx_costs): Bugfixes.

2018-07-13  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (copy_function_or_variable): Dump info about
	copying section.

2018-07-13  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Steve Munroe  <munroesj52@gmail.com>

	* config/rs6000/emmintrin.h (_mm_and_si128): New function.
	(_mm_andnot_si128): Likewise.
	(_mm_or_si128): Likewise.
	(_mm_xor_si128): Likewise.

2018-07-13  Qing Zhao  <qing.zhao@oracle.com>

	PR middle-end/78809
	* builtins.c (expand_builtin_memcmp): Inline the calls first
	when result_eq is false.
	(expand_builtin_strcmp): Inline the calls first.
	(expand_builtin_strncmp): Likewise.
	(inline_string_cmp): New routine. Expand a string compare
	call by using a sequence of char comparison.
	(inline_expand_builtin_string_cmp): New routine. Inline expansion
	a call to str(n)cmp/memcmp.
	* doc/invoke.texi (--param builtin-string-cmp-inline-length):
	New option.
	* params.def (BUILTIN_STRING_CMP_INLINE_LENGTH): New.

2018-07-13  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/driver-arm.c: Include arm-native.h.
	(host_detect_local_cpu): Use auto-generated data tables.
	(vendors, arm_cpu_table): Delete.  Move part information to ...
	* config/arm/arm-cpus.in: ... here.
	* config/arm/parsecpu.awk (gen_native): New function.
	(vendor, part): New CPU fields.
	(END): Add support for building the native CPU detection tables.
	* config/arm/t-arm (arm-native.h): Add build rule.
	(driver-arm.o): Add dependency on arm-native.h.

2018-07-13  Richard Biener  <rguenther@suse.de>

	PR middle-end/85974
	* match.pd (addr1 - addr2): Allow either of the operand to
	have a conversion.

2018-07-13  Tom de Vries  <tdevries@suse.de>

	* tree-inline.c (remap_ssa_name): Save and reuse debug exprs generated
	in remap_ssa_name.

2018-07-13  Jackson Woodruff  <jackson.woodruff@arm.com>

	* config/aarch64/aarch64.c (aarch64_operands_adjust_ok_for_ldpstp): Use
	arrays instead of numbered variables.

2018-07-13  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc-protos.h (sparc_compute_frame_size): Delete.
	* config/sparc/sparc.c (sparc_compute_frame_size): Make static.

2018-07-13  Richard Biener  <rguenther@suse.de>

	PR debug/86452
	* dwarf2out.c (gen_type_die_with_usage): Use scope_die_for
	instead of get_context_die.

2018-07-13  Kugan Vivekanandarajah  <kuganv@linaro.org>
	    Richard Biener  <rguenther@suse.de>

	PR middle-end/86489
	* tree-ssa-loop-niter.c (number_of_iterations_popcount): Check
	that the loop latch destination where phi is defined.

2018-07-12  Kito Cheng  <kito.cheng@gmail.com>

	* config/riscv/riscv.c (enum riscv_privilege_levels): Add UNKNOWN_MODE.
	(riscv_expand_epilogue): Add assertion to check interrupt mode.
	(riscv_set_current_function): Extract getting interrupt type to new
	function.
	(riscv_get_interrupt_type): New function.
	(riscv_merge_decl_attributes): New function, checking interrupt type is
	same.
	(TARGET_MERGE_DECL_ATTRIBUTES): Define.

2018-07-12  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/pdp11.c (pdp11_output_def): Fix typo in .set
	directive.

2018-07-12  Paul Koning  <ni1d@arrl.net>

	* doc/rtl.texi (REG_NONNEG): Remove decrement and branch until
	zero reference, add doloop_end instead.
	* doc/md.texi (decrement_and_branch_until_zero): Remove.
	(Looping patterns): Remove decrement_and_branch_until_zero.  Add
	detail for doloop_end.

2018-07-12  Martin Sebor  <msebor@redhat.com>

	PR c/86453
	* attribs.c (decl_attributes): Reject conflicting attributes before
	calling attribute handlers.

2018-07-12  Jan Hubicka  <hubicka@ucw.cz>

	* dumpfile.c (gcc::dump_manager::get_dump_file_name): Add PART
	 parameter.
	(gcc::dump_manager::get_dump_file_name): likewise.
	(dump_begin): Likewise.
	* dumpfile.h (dump_begin): Update prototype.
	(gcc::dump_manager::get_dump_file_name,
	gcc::dump_manager::get_dump_file_name): Update prototype.

2018-07-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* internal-fn.h (vectorizable_internal_fn_p): New function.
	* tree-vect-slp.c (compatible_calls_p): Likewise.
	(vect_build_slp_tree_1): Remove nops argument.  Handle calls
	to internal functions.
	(vect_build_slp_tree_2): Update call to vect_build_slp_tree_1.

2018-07-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* fold-const.h (inverse_conditions_p): Declare.
	* fold-const.c (inverse_conditions_p): New function.
	* match.pd: Use inverse_conditions_p.  Add folds of view_converts
	that test the inverse condition of a conditional internal function.
	* internal-fn.h (vectorized_internal_fn_supported_p): Declare.
	* internal-fn.c (internal_fn_mask_index): Handle conditional
	internal functions.
	(vectorized_internal_fn_supported_p): New function.
	* tree-if-conv.c: Include internal-fn.h and fold-const.h.
	(any_pred_load_store): Replace with...
	(need_to_predicate): ...this new variable.
	(redundant_ssa_names): New variable.
	(ifcvt_can_use_mask_load_store): Move initial checks to...
	(ifcvt_can_predicate): ...this new function.  Handle tree codes
	for which a conditional internal function exists.
	(if_convertible_gimple_assign_stmt_p): Use ifcvt_can_predicate
	instead of ifcvt_can_use_mask_load_store.  Update after variable
	name change.
	(predicate_load_or_store): New function, split out from
	predicate_mem_writes.
	(check_redundant_cond_expr): New function.
	(value_available_p): Likewise.
	(predicate_rhs_code): Likewise.
	(predicate_mem_writes): Rename to...
	(predicate_statements): ...this.  Use predicate_load_or_store
	and predicate_rhs_code.
	(combine_blocks, tree_if_conversion): Update after above name changes.
	(ifcvt_local_dce): Handle redundant_ssa_names.
	* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): Handle
	general conditional functions.
	* tree-vect-stmts.c (vectorizable_call): Likewise.

2018-07-12  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* internal-fn.h (can_interpret_as_conditional_op_p): Declare.
	* internal-fn.c (can_interpret_as_conditional_op_p): New function.
	* tree-ssa-math-opts.c (convert_mult_to_fma_1): Handle conditional
	plus and minus and convert them into IFN_COND_FMA-based sequences.
	(convert_mult_to_fma): Handle conditional plus and minus.

2018-07-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/md.texi (cond_fma, cond_fms, cond_fnma, cond_fnms): Document.
	* optabs.def (cond_fma_optab, cond_fms_optab, cond_fnma_optab)
	(cond_fnms_optab): New optabs.
	* internal-fn.def (COND_FMA, COND_FMS, COND_FNMA, COND_FNMS): New
	internal functions.
	(FMA): Use DEF_INTERNAL_FLT_FN rather than DEF_INTERNAL_FLT_FLOATN_FN.
	* internal-fn.h (get_conditional_internal_fn): Declare.
	(get_unconditional_internal_fn): Likewise.
	* internal-fn.c (cond_ternary_direct): New macro.
	(expand_cond_ternary_optab_fn): Likewise.
	(direct_cond_ternary_optab_supported_p): Likewise.
	(FOR_EACH_COND_FN_PAIR): Likewise.
	(get_conditional_internal_fn): New function.
	(get_unconditional_internal_fn): Likewise.
	* gimple-match.h (gimple_match_op::MAX_NUM_OPS): Bump to 5.
	(gimple_match_op::gimple_match_op): Add a new overload for 5
	operands.
	(gimple_match_op::set_op): Likewise.
	(gimple_resimplify5): Declare.
	* genmatch.c (decision_tree::gen): Generate simplifications for
	5 operands.
	* gimple-match-head.c (gimple_simplify): Define an overload for
	5 operands.  Handle calls with 5 arguments in the top-level overload.
	(convert_conditional_op): Handle conversions from unconditional
	internal functions to conditional ones.
	(gimple_resimplify5): New function.
	(build_call_internal): Pass a fifth operand.
	(maybe_push_res_to_seq): Likewise.
	(try_conditional_simplification): Try converting conditional
	internal functions to unconditional internal functions.
	Handle 3-operand unconditional forms.
	* match.pd (UNCOND_TERNARY, COND_TERNARY): Operator lists.
	Define ternary equivalents of the current rules for binary conditional
	internal functions.
	* config/aarch64/aarch64.c (aarch64_preferred_else_value): Handle
	ternary operations.
	* config/aarch64/iterators.md (UNSPEC_COND_FMLA, UNSPEC_COND_FMLS)
	(UNSPEC_COND_FNMLA, UNSPEC_COND_FNMLS): New unspecs.
	(optab): Handle them.
	(SVE_COND_FP_TERNARY): New int iterator.
	(sve_fmla_op, sve_fmad_op): New int attributes.
	* config/aarch64/aarch64-sve.md (cond_<optab><mode>)
	(*cond_<optab><mode>_2, *cond_<optab><mode_4)
	(*cond_<optab><mode>_any): New SVE_COND_FP_TERNARY patterns.

2018-07-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* target.def (preferred_else_value): New target hook.
	* doc/tm.texi.in (TARGET_PREFERRED_ELSE_VALUE): New hook.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_preferred_else_value): Declare.
	* targhooks.c (default_preferred_else_value): New function.
	* internal-fn.h (conditional_internal_fn_code): Declare.
	* internal-fn.c (FOR_EACH_CODE_MAPPING): New macro.
	(get_conditional_internal_fn): Use it.
	(conditional_internal_fn_code): New function.
	* gimple-match.h (gimple_match_cond): New struct.
	(gimple_match_op): Add a cond member function.
	(gimple_match_op::gimple_match_op): Update all forms to take a
	gimple_match_cond.
	* genmatch.c (expr::gen_transform): Use the same condition as res_op
	for the suboperation, but don't specify a particular else_value.
	* tree-ssa-sccvn.c (vn_nary_simplify, vn_reference_lookup_3)
	(visit_nary_op, visit_reference_op_load): Pass
	gimple_match_cond::UNCOND to the gimple_match_op constructor.
	* gimple-match-head.c: Include tree-eh.h
	(convert_conditional_op): New function.
	(maybe_resimplify_conditional_op): Likewise.
	(gimple_resimplify1): Call maybe_resimplify_conditional_op.
	(gimple_resimplify2): Likewise.
	(gimple_resimplify3): Likewise.
	(gimple_resimplify4): Likewise.
	(maybe_push_res_to_seq): Return null for conditional operations.
	(try_conditional_simplification): New function.
	(gimple_simplify): Call it.  Pass conditions to the gimple_match_op
	constructor.
	* match.pd: Fold VEC_COND_EXPRs of an IFN_COND_* call to a new
	IFN_COND_* call.
	* config/aarch64/aarch64.c (aarch64_preferred_else_value): New
	function.
	(TARGET_PREFERRED_ELSE_VALUE): Redefine.

2018-07-12  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (DFS::DFS_write_tree_body): Do not stream
	DECL_FCONTEXT
	(hash_tree): Do not hash DECL_FCONTEXT
	* tree-streamer-in.c (lto_input_ts_field_decl_tree_pointers):
	Do not stream DECL_FCONTEXT.
	* tree-streamer-out.c (write_ts_field_decl_tree_pointers): Likewise.
	* tree.c (free_lang_data_in_decl): Free DECL_FCONTEXT.

2018-07-12  Richard Biener  <rguenther@suse.de>

	PR debug/86462
	* dwarf2out.c (gen_block_die): Only output blocks when they have
	at least one !DECL_IGNORED_P variable.

2018-07-12  Richard Biener  <rguenther@suse.de>

	PR target/84829
	* config/gnu-user.h (GNU_USER_TARGET_NO_PTHREADS_LIB_SPEC):
	Remove -mieee-fp handling.

2018-07-12  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_lookup_simplify_result): Remove bogus
	left-over from last patch.

2018-07-12  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/86492
	* gimple-ssa-store-merging.c
	(imm_store_chain_info::coalesce_immediate_stores): Call
	check_no_overlap even for the merge_overlapping case.  Formatting fix.

2018-07-12  Richard Biener  <rguenther@suse.de>

	PR middle-end/86479
	* fold-const.c (fold_binary_op_with_conditional_arg): Do not
	move possibly trapping operations into the conditional.

2018-07-12  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (mprts_hook_cnt): Remove.
	(vn_lookup_simplify_result): Remove recursion limit applied
	here.
	(vn_nary_build_or_lookup_1): Adjust.
	(try_to_simplify): Likewise.
	* gimple-match-head.c (gimple_resimplify1): Instead apply one
	here.
	(gimple_resimplify2): Likewise.
	(gimple_resimplify3): Likewise.
	(gimple_resimplify4): Likewise.

2018-07-11  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/avx512bitalgintrin.h (_mm512_mask_bitshuffle_epi64_mask):
	Use __mmask64 type instead of __mmask8 for __M argument.
	* config/i386/avx512fintrin.h (_mm512_mask_xor_epi64,
	_mm512_maskz_xor_epi64): Use __mmask8 type instead of __mmask16 for
	__U argument.
	(_mm512_mask_cmpneq_epi64_mask): Use __mmask8 type instead of
	__mmask16 for __M argument.
	(_mm512_maskz_insertf32x4, _mm512_maskz_inserti32x4,
	_mm512_mask_insertf32x4, _mm512_mask_inserti32x4): Cast last argument
	to __mmask16 instead of __mmask8.
	* config/i386/avx512vlintrin.h (_mm_mask_add_ps, _mm_maskz_add_ps,
	_mm256_mask_add_ps, _mm256_maskz_add_ps, _mm_mask_sub_ps,
	_mm_maskz_sub_ps, _mm256_mask_sub_ps, _mm256_maskz_sub_ps,
	_mm256_maskz_cvtepi32_ps, _mm_maskz_cvtepi32_ps): Use __mmask8 type
	instead of __mmask16 for __U argument.
	* config/i386/avx512vlbwintrin.h (_mm_mask_cmp_epi8_mask): Use
	__mmask16 instead of __mmask8 for __U argument.
	(_mm256_mask_cmp_epi8_mask): Use __mmask32 instead of __mmask16 for
	__U argument.
	(_mm256_cmp_epi8_mask): Use __mmask32 return type instead of
	__mmask16.
	(_mm_mask_cmp_epu8_mask): Use __mmask16 instead of __mmask8 for __U
	argument.
	(_mm256_mask_cmp_epu8_mask): Use __mmask32 instead of __mmask16 for
	__U argument.
	(_mm256_cmp_epu8_mask): Use __mmask32 return type instead of
	__mmask16.
	(_mm_mask_cmp_epi16_mask): Cast last argument to __mmask8 instead
	of __mmask16.
	(_mm256_mask_cvtepi8_epi16): Use __mmask16 instead of __mmask32 for
	__U argument.
	(_mm_mask_cvtepi8_epi16): Use __mmask8 instead of __mmask32 for
	__U argument.
	(_mm256_mask_cvtepu8_epi16): Use __mmask16 instead of __mmask32 for
	__U argument.
	(_mm_mask_cvtepu8_epi16): Use __mmask8 instead of __mmask32 for
	__U argument.
	(_mm256_mask_cmpneq_epu8_mask, _mm256_mask_cmplt_epu8_mask,
	_mm256_mask_cmpge_epu8_mask, _mm256_mask_cmple_epu8_mask): Change
	return type as well as __M argument type and all casts from __mmask8
	to __mmask32.
	(_mm256_mask_cmpneq_epu16_mask, _mm256_mask_cmplt_epu16_mask,
	_mm256_mask_cmpge_epu16_mask, _mm256_mask_cmple_epu16_mask): Change
	return type as well as __M argument type and all casts from __mmask8
	to __mmask16.
	(_mm256_mask_cmpneq_epi8_mask, _mm256_mask_cmplt_epi8_mask,
	_mm256_mask_cmpge_epi8_mask, _mm256_mask_cmple_epi8_mask): Change
	return type as well as __M argument type and all casts from __mmask8
	to __mmask32.
	(_mm256_mask_cmpneq_epi16_mask, _mm256_mask_cmplt_epi16_mask,
	_mm256_mask_cmpge_epi16_mask, _mm256_mask_cmple_epi16_mask): Change
	return type as well as __M argument type and all casts from __mmask8
	to __mmask16.
	* config/i386/avx512vbmi2vlintrin.h (_mm_mask_shrdi_epi32,
	_mm_mask_shldi_epi32): Cast last argument to __mmask8 instead of
	__mmask16.

2018-07-11  Grazvydas Ignotas  <notasas@gmail.com>

	* config/i386/avx512bwintrin.h: (_mm512_mask_cmp_epi8_mask,
	_mm512_mask_cmp_epu8_mask): Use __mmask64 type instead of __mmask32
	for __U argument.

2018-07-11  Paul Koning  <ni1d@arrl.net>

	* doc/md.texi (define_subst): Document how multiple occurrences of
	the same argument in the replacement pattern are handled.

2018-07-11  Paul Koning  <ni1d@arrl.net>

	* doc/extend.texi (Common Variable Attributes): Move "mode" into
	alphabetical order.
	(Common Type Attributes): Add "mode" attribute.

2018-07-11  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (DFS::DFS_write_tree_body): Do not
	stream DECL_ORIGINAL_TYPE.
	(DFS::DFS_write_tree_body): Drop hack handling local external decls.
	(hash_tree): Do not walk DECL_ORIGINAL_TYPE.
	* tree-streamer-in.c (lto_input_ts_decl_non_common_tree_pointers):
	Do not walk original type.
	* tree-streamer-out.c (streamer_write_chain): Drop hack handling
	external decls.
	(write_ts_decl_non_common_tree_pointers): Do not stream
	DECL_ORIGINAL_TYPE
	* tree.c (free_lang_data_in_decl): Clear DECL_ORIGINAL_TYPE.
	(find_decls_types_r): Do not walk DEC_ORIGINAL_TYPE.

2018-07-11  Aldy Hernandez  <aldyh@redhat.com>

	* tree-ssa-threadupdate.c (thread_through_all_blocks): Do not jump
	thread twice from the same starting edge.

2018-07-11  Aldy Hernandez  <aldyh@redhat.com>

	* vr-values.c (gimple_stmt_nonzero_p): Abstract common code to...
	* gimple.c (gimple_call_nonnull_result_p): ...here...
	(gimple_call_nonnull_arg): ...and here.
	* gimple.h (gimple_call_nonnull_result_p): New.
	(gimple_call_nonnull_arg): New.

2018-07-11  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm-cpus.in: Move information from fpu field of each
	cpu definition to the isa field.
	* config/arm/parsecpu.awk (fpu): Delete match rule.
	(gen_comm_data): Don't add bits from the CPU's FPU entry.

2018-07-11  Richard Biener  <rguenther@suse.de>

	PR debug/86457
	* dwarf2out.c (init_sections_and_labels): Use
	output_asm_line_debug_info consistently.
	(dwarf2out_early_finish): Likewise.
	(dwarf2out_finish): Remove DW_AT_stmt_list from early generated
	type units.

2018-07-11  Richard Biener  <rguenther@suse.de>

	* tree-ssa-loop-ivcanon.c (tree_unroll_loops_completely_1):
	Rework father_bb setting in a way to avoid propagating constants
	multiple times on a loop body.

2018-07-10  Mark Wielaard  <mark@klomp.org>

	PR debug/86459
	* dwarf2out.c (output_macinfo_op): Fix dwarf_FORM typo in gcc_assert.

2018-07-10  Richard Biener  <rguenther@suse.de>

	* hash-map.h (hash_map::iterator::operator*): Return
	references to key and value.

2018-07-10  Jakub Jelinek  <jakub@redhat.com>

	PR c++/86443
	* gimplify.c (find_combined_omp_for): Add DATA argument, in addition
	to finding the inner OMP_FOR/OMP_SIMD stmt find non-trivial wrappers,
	BLOCKs with BLOCK_VARs, OMP_PARALLEL in between, OMP_FOR in between.
	(gimplify_omp_for): For composite loops, move outer
	OMP_{DISTRIBUTE,TASKLOOP,FOR,PARALLEL} right around innermost
	OMP_FOR/OMP_SIMD if there are any non-trivial wrappers.  For class
	iterators add any needed clauses.  Allow OMP_FOR_ORIG_DECLS to contain
	TREE_LIST for both the original class iterator and the "last" helper
	var.  Gimplify OMP_FOR_PRE_BODY before the outermost composite
	loop, remember has_decl_expr from outer composite loops for the
	innermost OMP_SIMD in TREE_PRIVATE bit on OMP_FOR_INIT.

2018-07-09  Martin Sebor  <msebor@redhat.com>

	PR middle-end/77357
	PR middle-end/86428
	* builtins.c (c_strlen): Avoid out-of-bounds warnings when
	accessing implicitly initialized array elements.
	* expr.c (string_constant): Handle string initializers of
	character arrays within aggregates.
	* gimple-fold.c (fold_array_ctor_reference): Add argument.
	Store element offset.  As a special case, handle zero size.
	(fold_nonarray_ctor_reference): Same.
	(fold_ctor_reference): Add argument.  Store subobject offset.
	* gimple-fold.h (fold_ctor_reference): Add argument.

2018-07-09  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/pdp11.c (pdp11_addr_cost): New function.
	(pdp11_insn_cost): New function.
	(pdp11_md_asm_adjust): New function.
	(TARGET_INVALID_WITHIN_DOLOOP): Define.
	(pdp11_rtx_costs): Update to match machine better.
	(output_addr_const_pdp11): Correct format mismatch warnings.
	* config/pdp11/pdp11.h (SLOW_BYTE_ACCESS): Correct definition.
	* config/pdp11/pdp11.md: General change to add base_cost and/or
	length attributes for use by new pdp11_insn_cost function.
	(MIN_BRANCH): Correct definition.
	(MIN_SOB): Ditto.
	(doloop_end): Use standard pattern name for looping pattern.
	(doloop_end_nocc): New.
	(movsf): Add another constraint alternative.
	(zero_extendqihi2): Add constraint alternatives for not in place
	extend.
	(zero_extendhisi2): Remove.
	(shift patterns): Add CC handling variants.
	(bswaphi2): New.
	(bswapsi2): New.
	(rothi3): New.
	(define_peephole2): New peephole to recognize mov that sets CC for
	subsequent test.

2018-07-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/sparc/sparc.c (sparc_fold_builtin) <SPARC_BUILTIN_PDIST,
	SPARC_BUILTIN_PDISTN>: Adapt for signature change of wi::neg,
	wi::add.

2018-07-09  Jakub Jelinek  <jakub@redhat.com>

	PR c/86420
	* real.c (real_nextafter): Return true if result is denormal.

2018-07-09  Martin Liska  <mliska@suse.cz>

	* common.opt: Add back wrongly removed attribute.

2018-07-09  Richard Biener  <rguenther@suse.de>

	PR debug/86413
	* dwarf2out.c (gen_block_die): For an early generated DIE
	always output high/low PC attributes.

2018-07-09  Tom de Vries  <tdevries@suse.de>

	* cfgexpand.c (expand_debug_source_expr): Handle VAR_DECL.
	* tree-inline.c (remap_ssa_name): Handle default def ssa_name mapping
	onto VAR_DECL with abstract origin.

2018-07-07  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (TARGET_CUSTOM_FUNCTION_DESCRIPTORS): New.

2018-07-07  Tom de Vries  <tdevries@suse.de>

	* tree-dfa.c (dump_enumerated_decls): Handle cfun->cfg == NULL.

2018-07-07  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (vrp_int_const_binop): Change overflow type to
	overflow_type.
	(combine_bound): Use wide-int overflow calculation instead of
	rolling our own.
	* calls.c (maybe_warn_alloc_args_overflow): Change overflow type to
	overflow_type.
	* fold-const.c (int_const_binop_2): Same.
	(extract_muldiv_1): Same.
	(fold_div_compare): Same.
	(fold_abs_const): Same.
	* match.pd: Same.
	* poly-int.h (add): Same.
	(sub): Same.
	(neg): Same.
	(mul): Same.
	* predict.c (predict_iv_comparison): Same.
	* profile-count.c (slow_safe_scale_64bit): Same.
	* simplify-rtx.c (simplify_const_binary_operation): Same.
	* tree-chrec.c (tree_fold_binomial): Same.
	* tree-data-ref.c (split_constant_offset_1): Same.
	* tree-if-conv.c (idx_within_array_bound): Same.
	* tree-scalar-evolution.c (iv_can_overflow_p): Same.
	* tree-ssa-phiopt.c (minmax_replacement): Same.
	* tree-vect-loop.c (is_nonwrapping_integer_induction): Same.
	* tree-vect-stmts.c (vect_truncate_gather_scatter_offset): Same.
	* vr-values.c (vr_values::adjust_range_with_scev): Same.
	* wide-int.cc (wi::add_large): Same.
	(wi::mul_internal): Same.
	(wi::sub_large): Same.
	(wi::divmod_internal): Same.
	* wide-int.h: Change overflow type to overflow_type for neg, add,
	mul, smul, umul, div_trunc, div_floor, div_ceil, div_round,
	mod_trunc, mod_ceil, mod_round, add_large, sub_large,
	mul_internal, divmod_internal.
	(overflow_type): New enum.
	(accumulate_overflow): New.

2018-07-06  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* tree-ssa-phiopt.c (cond_removal_in_popcount_pattern): New.
	(tree_ssa_phiopt_worker): Call cond_removal_in_popcount_pattern.

2018-07-06  Kugan Vivekanandarajah  <kuganv@linaro.org>

	* tree-ssa-loop-niter.c (number_of_iterations_popcount): If popcount
	argument is checked for zero before entering loop, avoid checking again.

2018-07-06  Kugan Vivekanandarajah  <kuganv@linaro.org>

	* gimplify.h (generic_expr_could_trap_p): Set as global function.
	* gimplify.h (generic_expr_could_trap_p): Likwise.
	* tree-scalar-evolution.c (expression_expensive_p): Handle COND_EXPR.

2018-07-06  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/86401
	* fold-const.c (fold_binary_loc) <case BIT_AND_EXPR>: Move the
	((A & N) + B) & M -> (A + B) & M etc. optimization into ...
	(fold_bit_and_mask): ... here.  New helper function for match.pd.
	* fold-const.h (fold_bit_and_mask): Declare.
	* match.pd (((A & N) + B) & M -> (A + B) & M): New optimization.

2018-07-06  Peter Bergner  <bergner@linux.ibm.com>

	PR target/86324
	* target.def (translate_mode_attribute): New hook.
	* targhooks.h (default_translate_mode_attribute): Declare.
	* targhooks.c (default_translate_mode_attribute): New function.
	* doc/tm.texi.in (TARGET_TRANSLATE_MODE_ATTRIBUTE): New hook.
	* doc/tm.texi: Regenerate.
	* config/rs6000/rs6000.c (TARGET_TRANSLATE_MODE_ATTRIBUTE): Define.
	(rs6000_translate_mode_attribute): New function.

2018-07-06  Paul Koning  <ni1d@arrl.net>

	* doc/md.texi (define_split): Document DONE and FAIL.
	(define_peephole2): Ditto.

2018-07-05  Jeff Law  <law@redhat.com>

	PR tree-optimization/86010
	* tree-ssa-dse.c (compute_trims): More aggressively trim at
	both the head and tail of mem* and str* calls.

2018-07-05  Jim Wilson  <jimw@sifive.com>

	* config.gcc (riscv*-*-*): When setting xlen, handle riscv-*.

2018-07-05  Indu Bhagat  <indu.bhagat@oracle.com>

	* config/aarch64/aarch64-simd.md: correct flags text for
	MIN_EXPR replacement.

2018-07-05  James Clarke  <jrtc27@jrtc27.com>

	* configure: Regenerated.

2018-07-05  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-c.c: Map ALTIVEC_BUILTIN_VEC_UNPACKH for
	float argument to VSX_BUILTIN_DOUBLEH_V4SF.
	Map ALTIVEC_BUILTIN_VEC_UNPACKL for float argument to
	VSX_BUILTIN_DOUBLEL_V4SF.

2018-07-05  Martin Sebor  <msebor@redhat.com>

	PR c++/86400
	* tree-ssa-strlen.c (maybe_set_strlen_range): Use type size rather
	than its domain to compute its the upper bound of a char array.

2018-07-05  Nathan Sidwell  <nathan@acm.org>

	Replace NO_IMPLICIT_EXTERN_C with SYSTEM_IMPLICIT_EXTERN_C.
	* doc/cpp.texi: Update comment.
	* doc/tm.texi: Rebuilt.
	* doc/tm.texi.in (NO_IMPLICIT_EXTERN_C): Replace with ...
	(SYSTEM_IMPLICIT_EXTERN_C): ... this, opposite sense.
	* doc/extend.texi (Backwards Compatibility): Clarify it is system
	headers affected by extern "C".
	* system.h: Poison NO_IMPLICIT_EXTERN_C.
	* config/alpha/alpha.h, config/arm/uclinux-elf.h,
	config/bfin/elf.h, config/cris/cris.h, config/darwin.h,
	config/dragonfly.h, config/freebsd.h, config/gnu-user.h,
	config/i386/cygming.h, config/i386/djgpp.h, config/i386/nto.h,
	config/ia64/hpux.h, config/lm32/lm32.h, config/lm32/uclinux-elf.h,
	config/lynx.h, config/mips/elf.h, config/mmix/mmix.h,
	config/netbsd.h, config/pa/pa-hpux.h, config/powerpcspe/sysv4.h,
	config/riscv/elf.h, config/rs6000/sysv4.h, config/rtems.h,
	config/s390/tpf.h, config/sh/newlib.h, config/sol2.h,
	config/sparc/openbsd64.h, config/sparc/sp-elf.h,
	config/sparc/sp64-elf.h, config/spu/spu.h,
	config/stormy16/stormy16.h, config/v850/v850.h,
	config/visium/visium.h, config/vx-common.h, config/xtensa/elf.h: Don't
	define NO_IMPLICIT_EXTERN_C.
	* config/rs6000/aix.h: Set SYSTEM_IMPLICIT_EXTERN_C.

2018-07-05  Tamar Christina  <tamar.christina@arm.com>

	PR target/84711
	* config/arm/arm.c (arm_can_change_mode_class): Use GET_MODE_UNIT_SIZE
	instead of GET_MODE_SIZE when comparing Units.

2018-07-05  Tamar Christina  <tamar.christina@arm.com>

	PR target/84711
	* rtlanal.c (set_noop_p): Constrain on mode change,
	include hard-reg-set.h

2018-07-05  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64.c (aarch64_expand_movmem): Fix mode size.

2018-07-05  Jakub Jelinek  <jakub@redhat.com>

	Revert
	2018-07-04  Maxim Ostapenko  <m.ostapenko@samsung.com>

	PR sanitizer/84250
	* config/gnu-user.h (LIBASAN_EARLY_SPEC): Pass -lstdc++ for static
	libasan.
	* gcc.c: Do not pass LIBUBSAN_SPEC if ASan is enabled with UBSan.

2018-07-04  Maxim Ostapenko  <m.ostapenko@samsung.com>

	PR sanitizer/84250
	* config/gnu-user.h (LIBASAN_EARLY_SPEC): Pass -lstdc++ for static
	libasan.
	* gcc.c: Do not pass LIBUBSAN_SPEC if ASan is enabled with UBSan.

2018-07-04  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/86380
	* expmed.c (choose_multiplier): Fix incorrect comparison with mask.

2018-07-04  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (extract_range_from_binary_expr_1): Initialize
	neg_*_op* variables.

2018-07-04  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c: Define
	max_ratio_for_speed and max_ratio_for_size constants.

2018-07-04  Denys Vlasenko  <dvlasenk@redhat.com>
	    Martin Liska  <mliska@suse.cz>

	PR middle-end/66240
	PR target/45996
	PR c/84100
	* common.opt: Rename align options with 'str_' prefix.
	* common/config/i386/i386-common.c (set_malign_value): New
	function.
	(ix86_handle_option): Use it to set -falign-* options/
	* config/aarch64/aarch64-protos.h (struct tune_params): Change
	type from int to string.
	* config/aarch64/aarch64.c: Update default values from int
	to string.
	* config/alpha/alpha.c (alpha_override_options_after_change):
	Likewise.
	* config/arm/arm.c (arm_override_options_after_change_1): Likewise.
	* config/i386/dragonfly.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Print
	max skip conditionally.
	* config/i386/freebsd.h (SUBALIGN_LOG): New.
	(ASM_OUTPUT_MAX_SKIP_ALIGN): Print
	max skip conditionally.
	* config/i386/gas.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Print
	max skip conditionally.
	* config/i386/gnu-user.h (SUBALIGN_LOG): New.
	(ASM_OUTPUT_MAX_SKIP_ALIGN): Print
	max skip conditionally.
	* config/i386/i386.c (struct ptt): Change type from int to
	string.
	(ix86_default_align): Set default values.
	* config/i386/i386.h (ASM_OUTPUT_MAX_SKIP_PAD): Print
	max skip conditionally.
	* config/i386/iamcu.h (SUBALIGN_LOG): New.
	(ASM_OUTPUT_MAX_SKIP_ALIGN):
	* config/i386/lynx.h (ASM_OUTPUT_MAX_SKIP_ALIGN):
	* config/i386/netbsd-elf.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Print
	max skip conditionally.
	* config/i386/openbsdelf.h (SUBALIGN_LOG): New.
	(ASM_OUTPUT_MAX_SKIP_ALIGN) Print max skip conditionally.:
	* config/i386/x86-64.h (SUBALIGN_LOG): New.
	(ASM_OUTPUT_MAX_SKIP_ALIGN): Print
	max skip conditionally.
	(ASM_OUTPUT_MAX_SKIP_PAD): Likewise.
	* config/ia64/ia64.c (ia64_option_override): Set default values
	for alignment options.
	* config/m68k/m68k.c: Handle new str_align_* options.
	* config/mips/mips.c (mips_set_compression_mode): Change
	type of constants.
	(mips_option_override): Set default values for options.
	* config/powerpcspe/powerpcspe.c (rs6000_option_override_internal):
	Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Likewise.
	* config/rx/rx.c (rx_option_override): Likewise.
	* config/rx/rx.h (JUMP_ALIGN): Use align_jumps_log.
	(LABEL_ALIGN): Use align_labels_log.
	(LOOP_ALIGN): Use align_loops_align.
	* config/s390/s390.c (s390_asm_output_function_label): Use new
	macros.
	* config/sh/sh.c (sh_override_options_after_change):
	Change type of constants.
	* config/spu/spu.c (spu_sched_init): Likewise.
	* config/sparc/sparc.c (sparc_option_override): Set default
	values for options.
	* config/visium/visium.c (visium_option_override): Likewise.
	* config/visium/visium.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Do not
	emit p2align format with last argument if it's not needed.
	* doc/invoke.texi: Document extended format of -falign-*.
	* final.c: Use align_labels alignment.
	* flags.h (struct target_flag_state): Change type to use
	align_flags.
	(struct align_flags_tuple): New.
	(struct align_flags): Likewise.
	(align_loops_log): Redefine macro to use new types.
	(align_loops_max_skip): Redefine macro to use new types.
	(align_jumps_log): Redefine macro to use new types.
	(align_jumps_max_skip): Redefine macro to use new types.
	(align_labels_log): Redefine macro to use new types.
	(align_labels_max_skip): Redefine macro to use new types.
	(align_functions_log): Redefine macro to use new types.
	(align_loops): Redefine macro to use new types.
	(align_jumps): Redefine macro to use new types.
	(align_labels): Redefine macro to use new types.
	(align_functions): Redefine macro to use new types.
	(align_functions_max_skip): Redefine macro to use new types.
	(align_loops_value): New macro.
	(align_jumps_value): New macro.
	(align_labels_value): New macro.
	(align_functions_value): New macro.
	* function.c (invoke_set_current_function_hook): Propagate
	alignment values from flags to global variables default in
	topleev.h.
	* ipa-icf.c (sem_function::equals_wpa): Use
	cl_optimization_option_eq instead of memcmp.
	* lto-streamer.h (cl_optimization_stream_out): Support streaming
	of string types.
	(cl_optimization_stream_in): Likewise.
	* optc-save-gen.awk: Support strings in cl_optimization.
	* opth-gen.awk: Likewise.
	* opts.c (finish_options): Remove error checking of invalid
	value ranges.
	(MAX_CODE_ALIGN): Remove.
	(MAX_CODE_ALIGN_VALUE): Likewise.
	(parse_and_check_align_values): New function.
	(check_alignment_argument): Likewise.
	(common_handle_option): Use check_alignment_argument.
	* opts.h (parse_and_check_align_values): Declare.
	* toplev.c (init_alignments): Remove.
	(read_log_maxskip): New.
	(parse_N_M): Likewise.
	(parse_alignment_opts): Likewise.
	(backend_init_target): Remove usage of init_alignments.
	* toplev.h (parse_alignment_opts): Declare.
	* tree-streamer-in.c (streamer_read_tree_bitfields): Add new
	argument.
	* tree-streamer-out.c (streamer_write_tree_bitfields): Likewise.
	* tree.c (cl_option_hasher::equal): New.
	* varasm.c: Use new global macros.

2018-07-04  Denys Vlasenko  <dvlasenk@redhat.com>

	* config/i386/dragonfly.h: (ASM_OUTPUT_MAX_SKIP_ALIGN):
	Use a simpler align directive also if MAXSKIP = ALIGN-1.
	* config/i386/gas.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Likewise.
	* config/i386/lynx.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Likewise.
	* config/i386/netbsd-elf.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Likewise.
	* config/i386/i386.h (ASM_OUTPUT_MAX_SKIP_PAD): Likewise.
	* config/i386/freebsd.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Remove "If N
	is large, do at least 8 byte alignment" code. Add SUBALIGN_LOG
	define. Use a simpler align directive also if MAXSKIP = ALIGN-1.
	* config/i386/gnu-user.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Likewise.
	* config/i386/iamcu.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Likewise.
	* config/i386/openbsdelf.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Likewise.
	* config/i386/x86-64.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Likewise.

2018-07-04  Martin Liska  <mliska@suse.cz>
	    Jonathan Wakely  <jwakely@redhat.com>

	* coverage.c: Use correct type.
	* doc/invoke.texi: Language correction.

2018-07-03  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85620
	* config/i386/i386.c (rest_of_insert_endbranch): Also generate
	ENDBRANCH for non-tail call which may return via indirect branch.
	* doc/extend.texi: Document indirect_return attribute.

2018-07-03  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86274
	* gimple-ssa-sprintf.c (fmtresult::type_max_digits): Verify
	precondition.
	(format_floating): Correct handling of infinities and NaNs.

2018-07-03  Martin Sebor  <msebor@redhat.com>

	* print-tree.c (print_real_cst): New function.
	(print_node_brief): Call it.
	(print_node): Ditto.

2018-07-03  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (logical<mode>3_sn, logical<mode>3): Merge
	into a single pattern.

	* config/h8300/h8300.md (ors code_iterator): New.
	(bsetqi_msx, bnotqi_msx patterns and splitters): Consolidate into
	a single pattern and single splitter.
	(bsethi_msx, bnothi_msx patterns): Consolidate into a single pattern.
	(iorqi3_1, xorqi3_1): Likewise.
	(iorqi3, xorqi3 expanders): Similarly.

	* config/h8300/h8300.md (movmd_internal_normal): Consolidated with
	(movmd_internal) into a single pattern using the P mode iterator.
	(movmd splitters): Similarly.
	(stpcpy_internal_normal, stpcpy_internal): Similarly for thes patterns.
	(movsd splitters): Similarly.

	* config/h8300/h8300.c (h8300_insn_length_from_table): Consolidate
	ADDB, ADDW and ADDL into a single ADD attribute which selects the
	right table based on the size of the operand.
	* config/h8300/h8300.md (length_table): Corresponding changes. All
	references to "addb", "addw" and "addl" changed to "add".
	(btst patterns): Merge two variants into a single pattern.
	(tstqi, tsthi): Likewise.
	(addhi3_incdec, addsi3_incdec): Likewise.
	(subhi3_h8300hs, subsi3_h8300hs): Likewise.
	(mulhi3, mulsi3): Likewise.
	(udivhi3, udivsi3): Likewise.
	(divhi3, divsi3): Likewise.
	(andorqi3, andorhi3, andorsi3): Likewise.

2018-07-03  Uros Bizjak  <ubizjak@gmail.com>

	PR target/85694
	* config/i386/sse.md (uavg<mode>3_ceil): New expander.
	(<sse2_avx2>_uavg<mode>3<mask_name>): Simplify expander.

2018-07-03  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/85694
	* config/aarch64/iterators.md (HADD, RHADD): New int iterators.
	(u): Handle UNSPEC_SHADD, UNSPEC_UHADD, UNSPEC_SRHADD and
	UNSPEC_URHADD.
	* config/aarch64/aarch64-simd.md (<u>avg<mode>3_floor)
	(<u>avg<mode>3_ceil): New patterns.

2018-07-03  David Malcolm  <dmalcolm@redhat.com>

	* gcc.dg/vect/slp-perm-1.c: Remove "note: " prefix from
	scan-tree-dump directive.
	* gcc.dg/vect/slp-perm-2.c: Likewise.
	* gcc.dg/vect/slp-perm-3.c: Likewise.
	* gcc.dg/vect/slp-perm-5.c: Likewise.
	* gcc.dg/vect/slp-perm-6.c: Likewise.
	* gcc.dg/vect/slp-perm-7.c: Likewise.
	* gcc.dg/vect/slp-perm-8.c: Likewise.

2018-07-03  Marek Polacek  <polacek@redhat.com>

	PR middle-end/86202
	* gimple-fold.c (size_must_be_zero_p): Check the type of the size.

2018-07-03  Richard Biener  <rguenther@suse.de>

	PR ipa/86389
	* tree-ssa-structalias.c (find_func_clobbers): Properly
	handle indirect calls.

2018-07-03  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (HSI, QHSI, QHSIF): New mode iterators.
	(shifts): New code iterator.
	(movqi, movhi, movsi, movsf expanders): Consolidate into a single
	expander.  Fix HImode handling on H8/SX.
	(addqi3, addhi3, addsi3 expanders): Consolidate into a single expander.
	(subqi3, subhi3, subsi3 expanders): Likewise.
	(andqi3, andhi3, andsi3 expanders): Likewise.
	(iorqi3, iorhi3, iorsi3 expanders): Likewise.
	(xorqi3, xorhi3, xorsi3 expanders): Likewise.
	(negqi2, neghi2, negsi2, negsf2 expanders): Likewise.
	(one_cmplqi2, one_cmplhi2, one_cmplsi2): Likewise.
	(zero_extendqihi2, zero_extendqisi2): Likewise.
	(extendqihi2, extendqisi2): Likewise.
	(rotlqi3, rotlhi3, rotlsi3): Likewise.
	(neghi2_h8300, negsi2_h8300): Likewise for these patterns.
	(rotlqi3_1, rotlhi3_1): Likewise.
	(logicalhi3_sn, logicalsi3_sn): Likewise.
	(logicalhi3, logicalsi3): Likewise.

2018-07-03  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_recog_rotate_pattern)
	(vect_recog_vector_vector_shift_pattern, vect_recog_divmod_pattern)
	(vect_recog_mixed_size_cond_pattern, adjust_bool_pattern_cast)
	(adjust_bool_pattern, vect_recog_bool_pattern): Pass the vector
	type to append_pattern_def_seq instead of creating a stmt_vec_info
	directly.
	(build_mask_conversion): Likewise.  Remove vinfo argument.
	(vect_add_conversion_to_patterm): Likewise, renaming to...
	(vect_add_conversion_to_pattern): ...this.
	(vect_recog_mask_conversion_pattern): Update call to
	build_mask_conversion.  Pass the vector type to
	append_pattern_def_seq here too.
	(vect_recog_gather_scatter_pattern): Update call to
	vect_add_conversion_to_pattern.

2018-07-03  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (new_pattern_def_seq): Delete.
	(vect_recog_dot_prod_pattern, vect_recog_sad_pattern)
	(vect_recog_widen_op_pattern, vect_recog_over_widening_pattern)
	(vect_recog_rotate_pattern, vect_synth_mult_by_constant): Don't set
	STMT_VINFO_PATTERN_DEF_SEQ to null here.
	(vect_recog_pow_pattern, vect_recog_vector_vector_shift_pattern)
	(vect_recog_mixed_size_cond_pattern, vect_recog_bool_pattern): Use
	append_pattern_def_seq instead of new_pattern_def_seq.
	(vect_recog_divmod_pattern): Do both of the above.
	(vect_pattern_recog_1): Assert that STMT_VINO_PATTERN_DEF_SEQ
	is null.

2018-07-03  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_recog_dot_prod_pattern):
	(vect_recog_sad_pattern, vect_recog_widen_op_pattern)
	(vect_recog_widen_mult_pattern, vect_recog_pow_pattern):
	(vect_recog_widen_sum_pattern, vect_recog_over_widening_pattern)
	(vect_recog_average_pattern, vect_recog_cast_forwprop_pattern)
	(vect_recog_widen_shift_pattern, vect_recog_rotate_pattern)
	(vect_recog_vector_vector_shift_pattern, vect_synth_mult_by_constant)
	(vect_recog_mult_pattern, vect_recog_divmod_pattern)
	(vect_recog_mixed_size_cond_pattern, vect_recog_bool_pattern)
	(vect_recog_mask_conversion_pattern): Replace vec<gimple *>
	parameter with a single stmt_vec_info.
	(vect_recog_func_ptr): Likewise.
	(vect_recog_gather_scatter_pattern): Likewise, folding in...
	(vect_try_gather_scatter_pattern): ...this.
	(vect_pattern_recog_1): Remove stmts_to_replace and just pass
	the stmt_vec_info of the statement to be matched.  Don't clear
	STMT_VINFO_RELATED_STMT.
	(vect_pattern_recog): Update call accordingly.

2018-07-03  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/85694
	* doc/md.texi (avgM3_floor, uavgM3_floor, avgM3_ceil)
	(uavgM3_ceil): Document new optabs.
	* doc/sourcebuild.texi (vect_avg_qi): Document new target selector.
	* internal-fn.def (IFN_AVG_FLOOR, IFN_AVG_CEIL): New internal
	functions.
	* optabs.def (savg_floor_optab, uavg_floor_optab, savg_ceil_optab)
	(savg_ceil_optab): New optabs.
	* tree-vect-patterns.c (vect_recog_average_pattern): New function.
	(vect_vect_recog_func_ptrs): Add it.
	* tree-vect-stmts.c (vectorizable_call): Get the type of the zero
	constant directly from the associated lhs.

2018-07-03  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_split_statement): New function.
	(vect_convert_input): Use it to try to split an existing cast.

2018-07-03  Richard Sandiford  <richard.sandiford@arm.com>

	* poly-int.h (print_hex): New function.
	* dumpfile.h (dump_dec, dump_hex): Declare.
	* dumpfile.c (dump_dec, dump_hex): New poly_wide_int functions.
	* tree-vectorizer.h (_stmt_vec_info): Add min_output_precision,
	min_input_precision, operation_precision and operation_sign.
	* tree-vect-patterns.c (vect_get_range_info): New function.
	(vect_same_loop_or_bb_p, vect_single_imm_use)
	(vect_operation_fits_smaller_type): Delete.
	(vect_look_through_possible_promotion): Add an optional
	single_use_p parameter.
	(vect_recog_over_widening_pattern): Rewrite to use new
	stmt_vec_info infomration.  Handle one operation at a time.
	(vect_recog_cast_forwprop_pattern, vect_narrowable_type_p)
	(vect_truncatable_operation_p, vect_set_operation_type)
	(vect_set_min_input_precision): New functions.
	(vect_determine_min_output_precision_1): Likewise.
	(vect_determine_min_output_precision): Likewise.
	(vect_determine_precisions_from_range): Likewise.
	(vect_determine_precisions_from_users): Likewise.
	(vect_determine_stmt_precisions, vect_determine_precisions): Likewise.
	(vect_vect_recog_func_ptrs): Put over_widening first.
	Add cast_forwprop.
	(vect_pattern_recog): Call vect_determine_precisions.

2018-07-03  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_mark_pattern_stmts): Remove pattern
	statements that have been replaced by further pattern statements.
	(vect_pattern_recog_1): Clear STMT_VINFO_PATTERN_DEF_SEQ on failure.

2018-07-03  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (vect_is_simple_use): Consolidate dumping,
	always set *dt.  Dump vectype in vectype overload.
	* dumpfile.h (dump_gimple_expr): New function.
	(dump_gimple_expr_loc): Likewise.
	* dumpfile.c (dump_gimple_expr): New function.
	(dump_gimple_expr_loc): Likewise.

2018-07-02  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (movqi_h8300, movqi_h8300hs): Consolidate
	the H8/300, H8/300H and H8/S variants into a single pattern.
	(movhi_h8300, movqi_h8300hs): Similarly.
	(pushqi_h8300hs, pushhi_h8300hs): Consolidate into a single pattern.
	(QHI mode iterator): New.

	* config/h8300/h8300.md: Remove trailing whitespace.

2018-07-02  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_expand_epilogue): Use emit_jump_insn
	instead of emit_insn for interrupt returns.
	* config/riscv/riscv.md (riscv_met): Add (return) to rtl.
	(riscv_sret, riscv_uret): Likewise.

2018-07-02  David Malcolm  <dmalcolm@redhat.com>

	* pretty-print.c (selftest::test_pp_format): Move save and restore
	of quotes to class auto_fix_quotes, and add an instance.
	* selftest.c: Include "intl.h".
	(selftest::auto_fix_quotes::auto_fix_quotes): New ctor.
	(selftest::auto_fix_quotes::~auto_fix_quotes): New dtor.
	* selftest.h (selftest::auto_fix_quotes): New class.

2018-07-02  Richard Henderson  <richard.henderson@linaro.org>

	* config/aarch64/aarch64-protos.h, config/aarch64/aarch64.c
	(aarch64_sve_prepare_conditional_op): Remove.
	* config/aarch64/aarch64-sve.md (cond_<SVE_INT_BINARY><SVE_I>):
	Allow aarch64_simd_reg_or_zero as select operand; remove
	the aarch64_sve_prepare_conditional_op call.
	(cond_<SVE_INT_BINARY_SD><SVE_SDI>): Likewise.
	(cond_<SVE_COND_FP_BINARY><SVE_F>): Likewise.
	(*cond_<SVE_INT_BINARY><SVE_I>_z): New pattern.
	(*cond_<SVE_INT_BINARY_SD><SVE_SDI>_z): New pattern.
	(*cond_<SVE_COND_FP_BINARY><SVE_F>_z): New pattern.
	(*cond_<SVE_INT_BINARY><SVE_I>_any): New pattern.
	(*cond_<SVE_INT_BINARY_SD><SVE_SDI>_any): New pattern.
	(*cond_<SVE_COND_FP_BINARY><SVE_F>_any): New pattern
	and a splitters to match all of the *_any patterns.
	* config/aarch64/predicates.md (aarch64_sve_any_binary_operator): New.

	* config/aarch64/iterators.md (SVE_INT_BINARY_REV): Remove.
	(SVE_COND_FP_BINARY_REV): Remove.
	(sve_int_op_rev, sve_fp_op_rev): New.
	* config/aarch64/aarch64-sve.md (*cond_<SVE_INT_BINARY><SVE_I>_0): New.
	(*cond_<SVE_INT_BINARY_SD><SVE_SDI>_0): New.
	(*cond_<SVE_COND_FP_BINARY><SVE_F>_0): New.
	(*cond_<SVE_INT_BINARY><SVE_I>_2): Rename, add movprfx alternative.
	(*cond_<SVE_INT_BINARY_SD><SVE_SDI>_2): Similarly.
	(*cond_<SVE_COND_FP_BINARY><SVE_F>_2): Similarly.
	(*cond_<SVE_INT_BINARY><SVE_I>_3): Similarly; use sve_int_op_rev.
	(*cond_<SVE_INT_BINARY_SD><SVE_SDI>_3): Similarly.
	(*cond_<SVE_COND_FP_BINARY><SVE_F>_3): Similarly; use sve_fp_op_rev.

	* config/aarch64/aarch64-sve.md (cond_<SVE_COND_FP_BINARY><SVE_F>):
	Remove match_dup 1 from the inner unspec.
	(*cond_<SVE_COND_FP_BINARY><SVE_F>): Likewise.

	* config/aarch64/aarch64.md (movprfx): New attr.
	(length): Default movprfx to 8.
	* config/aarch64/aarch64-sve.md (*mul<SVE_I>3): Add movprfx alt.
	(*madd<SVE_I>, *msub<SVE_I): Likewise.
	(*<su>mul<SVE_I>3_highpart): Likewise.
	(*<SVE_INT_BINARY_SD><SVE_SDI>3): Likewise.
	(*v<ASHIFT><SVE_I>3): Likewise.
	(*<su><MAXMIN><SVE_I>3): Likewise.
	(*<su><MAXMIN><SVE_F>3): Likewise.
	(*fma<SVE_F>4, *fnma<SVE_F>4): Likewise.
	(*fms<SVE_F>4, *fnms<SVE_F>4): Likewise.
	(*div<SVE_F>4): Likewise.

2018-07-02  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_recog_widen_shift_pattern): Fix typo
	in dump string.

2018-07-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86363
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Check the
	memset argument refers to a non-variable address.

2018-07-02  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (extract_range_from_binary_expr_1): Abstract a lot of the
	{PLUS,MINUS}_EXPR code to...
	(adjust_symbolic_bound): ...here,
	(combine_bound): ...here,
	(set_value_range_with_overflow): ...and here.

2018-07-02  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (extract_range_from_unary_expr): Abstract ABS_EXPR
	code...
	(extract_range_from_abs_expr): ...here.

2018-07-02  Eric Botcazou  <ebotcazou@adacore.com>

	* config/i386/i386.c (ix86_finalize_stack_frame_flags): Do not overrule
	-fno-omit-frame-pointer when not optimizing.

2018-07-02  Martin Liska  <mliska@suse.cz>

	PR ipa/86279
	* ipa-pure-const.c (malloc_candidate_p): Revert usage of ::get.
	(propagate_nothrow): Likewise.

2018-07-02  Martin Liska  <mliska@suse.cz>

	PR ipa/86323
	* ipa-inline.c (early_inliner): Revert wrongly added ::get call.

2018-07-02  David Malcolm  <dmalcolm@redhat.com>

	* dumpfile.c (dump_generic_expr_loc): Undo removal of this
	function in r262149, changing "loc" param from source_location to
	const dump_location_t &.
	* dumpfile.h (dump_generic_expr_loc): Undo removal of this
	declaration, as above.

2018-07-01  Paul Koning  <ni1d@arrl.net>

	* common/config/pdp11/pdp11-common.c (pdp11_handle_option): Handle
	-munit-asm, -mgnu-asm, -mdec-asm.
	* config/pdp11/pdp11-protos.h (pdp11_gen_int_label): New.
	(pdp11_output_labelref): New.
	(pdp11_output_def): New.
	(pdp11_output_addr_vec_elt): New.
	* config/pdp11/pdp11.c: Use tab between opcode and operands.  Use
	%# and %@ format codes.
	(pdp11_option_override): New.
	(TARGET_ASM_FILE_START_FILE_DIRECTIVE): Define.
	(pdp11_output_ident): New.
	(pdp11_asm_named_section): New.
	(pdp11_asm_init_sections): New.
	(pdp11_file_start): New.
	(pdp11_file_end): New.
	(output_ascii): Use .ascii/.asciz for -mdec-asm.
	(pdp11_asm_print_operand): Update %# and %$ for -mdec-asm.  Add
	%o, like %c but octal.
	(pdp11_option_override): New.
	* config/pdp11/pdp11.h (TEXT_SECTION_ASM_OP): Update for
	-mdec-asm.
	(DATA_SECTION_ASM_OP): Ditto.
	(READONLY_DATA_SECTION_ASM_OP): New.
	(IS_ASM_LOGICAL_LINE_SEPARATOR): New.
	(ASM_GENERATE_INTERNAL_LABEL): Use new function.
	(ASM_OUTPUT_LABELREF): Ditto.
	(ASM_OUTPUT_DEF): Ditto.
	(ASM_OUTPUT_EXTERNAL): New.
	(ASM_OUTPUT_SOURCE_FILENAME): New.
	(ASM_OUTPUT_ADDR_VEC_ELT): Use new function.
	(ASM_OUTPUT_SKIP): Update for -mdec-asm.
	* config/pdp11/pdp11.md: Use tab between opcode and operands.  Use
	%# and %@ format codes.
	* config/pdp11/pdp11.opt (mgnu-asm): New.
	(mdec-asm): Conflicts with -mgnu-asm and -munix-asm.
	(munix-asm): Conflicts with -mdec-asm and -mgnu-asm.
	* doc/invoke.txt (PDP-11 Options): Add -mgnu-asm.

2018-07-01  Aldy Hernandez  <aldyh@redhat.com>

	* tree-ssa-threadupdate.c (mark_threaded_blocks): Avoid
	dereferencing path[] beyond its length.
	(debug_path): New.
	(debug_all_paths): New.
	(rewire_first_differing_edge): New.
	(adjust_paths_after_duplication): New.
	(duplicate_thread_path): Call adjust_paths_after_duplication.
	Add new argument.
	(thread_through_all_blocks): Add new argument to
	duplicate_thread_path.

2018-06-30  Jim Wilson  <jimw@sifive.com>

	* config/riscv/predicates.md (p2m1_shift_operand): New.
	(high_mask_shift_operand): New.
	* config/riscv/riscv.md (lshrsi3_zero_extend_3+1): New combiner
	pattern using p2m1_shift_operand.
	(lshsi3_zero_extend_3+2): New combiner pattern using
	high_mask_shift_operand.

2018-06-30  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_get_external_def_edge): New function,
	split out from...
	(vect_recog_rotate_pattern): ...here.
	(vect_convert_input): Try to insert casts of invariants in the
	preheader.
	* tree-vect-loop-manip.c (vect_loop_versioning): Don't require the
	preheader to be empty.

2018-06-30  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (append_pattern_def_seq): Take an optional
	vector type.  If given, install it in the new statement's
	STMT_VINFO_VECTYPE.
	(vect_element_precision): New function.
	(vect_unpromoted_value): New struct.
	(vect_unpromoted_value::vect_unpromoted_value): New function.
	(vect_unpromoted_value::set_op): Likewise.
	(vect_look_through_possible_promotion): Likewise.
	(vect_joust_widened_integer, vect_joust_widened_type): Likewise.
	(vect_widened_op_tree, vect_convert_input): Likewise.
	(vect_convert_inputs, vect_convert_output): Likewise.
	(vect_recog_dot_prod_pattern): Use vect_look_through_possible_promotion
	to handle the optional cast of the multiplication result and
	vect_widened_op_tree to detect the widened multiplication itself.
	Do not require the input and output of promotion casts to have
	the same sign, but base the signedness of the operation on the
	input rather than the result.  If the pattern includes two
	promotions, check that those promotions have the same sign.
	Do not restrict the MULT_EXPR handling to a double-width result;
	handle quadruple-width results and wider.  Use vect_convert_inputs
	to convert the inputs to the common type.
	(vect_recog_sad_pattern):  Use vect_look_through_possible_promotion
	to handle the optional cast of the ABS result.  Also allow a sign
	change or a sign extension between the ABS and MINUS.
	Use vect_widened_op_tree to detect the widened subtraction and use
	vect_convert_inputs to convert the inputs to the common type.
	(vect_handle_widen_op_by_const): Delete.
	(vect_recog_widen_op_pattern): New function.
	(vect_recog_widen_mult_pattern): Use it.
	(vect_recog_widen_shift_pattern): Likewise.
	(vect_recog_widen_sum_pattern): Use
	vect_look_through_possible_promotion to handle the promoted
	PLUS_EXPR operand.

2018-06-30  Richard Sandiford  <richard.sandiford@arm.com>

	* gimple-iterator.c (gsi_for_stmt): Add a new overload that takes
	the containing gimple_seq *.
	* gimple-iterator.h (gsi_for_stmt): Declare it.
	* tree-vect-patterns.c (vect_recog_dot_prod_pattern)
	(vect_recog_sad_pattern, vect_recog_widen_sum_pattern)
	(vect_recog_widen_shift_pattern, vect_recog_rotate_pattern)
	(vect_recog_vector_vector_shift_pattern, vect_recog_divmod_pattern)
	(vect_recog_mask_conversion_pattern): Remove STMT_VINFO_IN_PATTERN_P
	checks.
	(vect_init_pattern_stmt, vect_set_pattern_stmt): New functions,
	split out from...
	(vect_mark_pattern_stmts): ...here.  Handle cases in which the
	statement being replaced is part of an existing pattern
	definition sequence, inserting the new pattern statements before
	the original one.
	(vect_pattern_recog_1): Don't return a bool.  If the statement
	is already part of a pattern, instead apply pattern matching
	to the pattern definition statements.  Don't clear the
	STMT_VINFO_RELATED_STMT if is_pattern_stmt_p.
	(vect_pattern_recog): Don't break after the first match;
	continue processing the pattern definition statements instead.
	Don't bail out for STMT_VINFO_IN_PATTERN_P here.

2018-06-30  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_reassociating_reduction_p): New function.
	(vect_recog_dot_prod_pattern, vect_recog_sad_pattern)
	(vect_recog_widen_sum_pattern): Use it.

2018-06-30  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vectorizable_reduction): Assert that the
	phi is not a pattern statement and has not been replaced by
	a pattern statement.
	* tree-vect-patterns.c (type_conversion_p): Don't check
	STMT_VINFO_IN_PATTERN_P.
	(vect_recog_vector_vector_shift_pattern): Likewise.
	(vect_recog_dot_prod_pattern): Expect vect_is_simple_use to return
	the pattern statement rather than the original statement; check
	directly for a WIDEN_MULT_EXPR here.
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Expect
	vect_is_simple_use to return the pattern statement rather
	than the original statement; use is_pattern_stmt_p to check
	for such a pattern statement.
	* tree-vect-stmts.c (process_use): Expect vect_is_simple_use
	to return the pattern statement rather than the original statement;
	don't do the same transformation here.
	(vect_is_simple_use): If the defining statement has been replaced
	by a pattern statement, return the pattern statement instead.
	Remove the corresponding (local) transformation from the vectype
	overload.

2018-06-30  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_is_simple_use): Move the gimple ** to the
	end and default to null.
	* tree-vect-loop.c (vect_create_epilog_for_reduction)
	(vectorizable_reduction): Update calls accordingly, dropping the
	gimple ** argument if the passed-back statement isn't needed.
	* tree-vect-patterns.c (vect_get_internal_def, type_conversion_p)
	(vect_recog_rotate_pattern): Likewise.
	(vect_recog_mask_conversion_pattern): Likewise.
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Likewise.
	(vect_mask_constant_operand_p): Likewise.
	* tree-vect-stmts.c (is_simple_and_all_uses_invariant, process_use):
	(vect_model_simple_cost, vect_get_vec_def_for_operand): Likewise.
	(get_group_load_store_type, get_load_store_type): Likewise.
	(vect_check_load_store_mask, vect_check_store_rhs): Likewise.
	(vectorizable_call, vectorizable_simd_clone_call): Likewise.
	(vectorizable_conversion, vectorizable_assignment): Likewise.
	(vectorizable_shift, vectorizable_operation): Likewise.
	(vectorizable_store, vect_is_simple_cond): Likewise.
	(vectorizable_condition, vectorizable_comparison): Likewise.
	(get_same_sized_vectype, vect_get_mask_type_for_stmt): Likewise.
	(vect_is_simple_use): Rename the def_stmt argument to def_stmt_out
	and move it to the end.  Cope with null def_stmt_outs.

2018-06-30  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* Makefile.in (FLAGS_TO_PASS): Add RANLIB_FOR_TARGET.

2018-06-29  Jeff Law  <law@redhat.com>

	* config/v850/v850.c (v850_legitimate_address_p): Handle large
	displacements for TARGET_V850E2V3 and newer.
	(TARGET_LRA_P): Remove.  Defaults to LRA now.
	* config/v850/v850.md (sign23byte_load): Remove.
	(unsign23byte_load, sign23hword_load, unsign23hword_load): Likewise.
	(23word_load, 23byte_store, 23hword_store, 23word_store): Likewise.

2018-06-29  Martin Liska  <mliska@suse.cz>

	PR lto/85759
	* coverage.c (coverage_init): Mangle full path name.
	* doc/invoke.texi: Document the change.
	* gcov-io.c (mangle_path): New.
	* gcov-io.h (mangle_path): Likewise.
	* gcov.c (mangle_name): Use mangle_path for path mangling.

2018-06-29  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm.c (output_move_double): Don't allow STRD instructions
	if starting source register is not even.

2018-06-29  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/86263
	* tree-switch-conversion.c (switch_decision_tree::try_switch_expansion):
	Make edge redirection.

2018-06-29  David Malcolm  <dmalcolm@redhat.com>

	* dumpfile.c (dump_loc): Add indentation based on scope depth.
	(dump_scope_depth): New variable.
	(get_dump_scope_depth): New function.
	(dump_begin_scope): New function.
	(dump_end_scope): New function.
	* dumpfile.h (get_dump_scope_depth): New declaration.
	(dump_begin_scope): New declaration.
	(dump_end_scope): New declaration.
	(class auto_dump_scope): New class.
	(AUTO_DUMP_SCOPE): New macro.
	* tree-vectorizer.h (DUMP_VECT_SCOPE): Reimplement in terms of
	AUTO_DUMP_SCOPE.

2018-06-29  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_analyze_data_ref_dependences): Assert
	compute_all_dependences succeeds.
	* tree-vect-loop.c (vect_get_datarefs_in_loop): Fail early if we
	exceed --param loop-max-datarefs-for-datadeps.

2018-06-29  Jakub Jelinek  <jakub@redhat.com>

	* config/rs6000/t-rs6000: Append rs6000-modes.h to TM_H.

2018-06-28  Uros Bizjak  <ubizjak@gmail.com>

	PR target/86348
	* config/i386/sse.md (*vec_extractv4si_0_zext_sse4): Use
	alternative 0 in preferred_for_speed attribute.

2018-06-28  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/pdp11-protos.h (pdp11_shift_length): New function.
	* config/pdp11/pdp11.c (pdp11_shift_length): New function.
	* config/pdp11/pdp11.h (ADJUST_INSN_LENGTH): Remove.
	* config/pdp11/pdp11.md: Correct "length" attribute calculation
	for shift insn patterns.

2018-06-28  David Malcolm  <dmalcolm@redhat.com>

	* cgraph.c (cgraph_node::get_body): Replace assignments to
	"dump_file" with calls to set_dump_file.
	* dumpfile.c (alt_dump_file): Make static, and group with...
	(alt_flags): ...this definition.
	(dumps_are_enabled): New variable.
	(refresh_dumps_are_enabled): New function.
	(set_dump_file): New function.
	(set_alt_dump_file): New function.
	(gcc::dump_manager::dump_start): Replace assignments to
	"dump_file" and "alt_dump_file" with calls to set_dump_file and
	set_alt_dump_file.
	(gcc::dump_manager::dump_finish): Likewise.
	* dumpfile.h (alt_dump_file): Delete decl.
	(dumps_are_enabled): New variable decl.
	(set_dump_file): New function decl.
	(dump_enabled_p): Rewrite in terms of new "dumps_are_enabled"
	global.
	* tree-nested.c (lower_nested_functions): Replace assignments to
	"dump_file" with calls to set_dump_file.

2018-06-28  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-cfg.c (verify_gimple_in_cfg): Call verify_location on the
	goto_locus of each outgoing edge of each basic block.

2018-06-28  Richard Biener  <rguenther@suse.de>

	* dwarf2out.c (decl_scope_table): Remove.
	(push_decl_scope): Likewise.
	(pop_decl_scope): Likewise.
	(gen_type_die_for_member): Do not call push/pop_decl_scope.
	(gen_struct_or_union_type_die): Likewise.
	(gen_tagged_type_die): Likewise.
	(dwarf2out_init): Do not initialize decl_scope_table.
	(dwarf2out_c_finalize): Do not free it.

2018-06-28  Richard Biener  <rguenther@suse.de>

	* dwarf2out.c (gen_subprogram_die): Use is_unit_die when
	deciding whether to not re-use a DIE.

2018-06-28  Richard Biener  <rguenther@suse.de>

	* dwarf2out.c (gen_subprogram_die): Always re-use DIEs with an
	DW_AT_abstract_origin attribute.

2018-06-28  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (jump_table_cluster::can_be_handled):
	Use newly introduced constants.
	* tree-switch-conversion.h (struct jump_table_cluster):
	Define max_ratio_for_size and max_ratio_for_speed.

2018-06-28  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (jump_table_cluster::find_jump_tables):
	Add new checking assert to catch invalid state.
	(jump_table_cluster::can_be_handled): Handle single case
	clusters.
	(jump_table_cluster::is_beneficial): Bail out for such case.
	(bit_test_cluster::find_bit_tests):
	Add new checking assert to catch invalid state.
	(bit_test_cluster::can_be_handled): Handle single case
	clusters.
	(bit_test_cluster::is_beneficial): Bail out for such case.
	(switch_decision_tree::analyze_switch_statement):
	Fix comment.

2018-06-28  Martin Liska  <mliska@suse.cz>

	* common.opt: Introduce -completion option.
	* gcc.c (driver_handle_option): Handle it.
	(driver::main): Print completions if completion
	is set.
	* opt-suggestions.c (option_proposer::get_completions):
	New function.
	(option_proposer::suggest_completion): Likewise.
	(option_proposer::find_param_completions): Likewise.
	(verify_autocompletions): Likewise.
	(test_completion_valid_options): Likewise.
	(test_completion_valid_params): Likewise.
	(in_completion_p): Likewise.
	(empty_completion_p): Likewise.
	(test_completion_partial_match): Likewise.
	(test_completion_garbage): Likewise.
	(opt_proposer_c_tests): Likewise.
	* opt-suggestions.h: Declare new functions.
	* opts.c (common_handle_option): Handle OPT__completion_.
	* selftest-run-tests.c (selftest::run_tests): Add
	opt_proposer_c_tests.
	* selftest.c (assert_str_startswith): New.
	* selftest.h (assert_str_startswith): Likewise.
	(opt_proposer_c_tests): New.
	(ASSERT_STR_STARTSWITH): Likewise.

2018-06-28  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Add opt-suggestions.o.
	* gcc-main.c: Include opt-suggestions.h.
	* gcc.c (driver::driver): Likewise.
	(driver::~driver): Remove m_option_suggestions.
	(driver::build_option_suggestions): Moved to option_proposer.
	(driver::suggest_option): Likewise.
	(driver::handle_unrecognized_options): Use option_proposer.
	* gcc.h (class driver): Add new memver m_option_proposer.
	* opt-suggestions.c: New file.
	* opt-suggestions.h: New file.

2018-06-28  Martin Liska  <mliska@suse.cz>

	* vec.h (class auto_string_vec): New (moved from auto_argvec).
	(auto_string_vec::~auto_string_vec): Likewise.

2018-06-28  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-inline.h (struct copy_body_data): Move remapping_type_depth and
	prevent_decl_creation_for_types fields up and add reset_location field.
	* tree-inline.c (remap_gimple_stmt): Force input_location on the new
	statement if id->reset_location is true.
	(copy_edges_for_bb): Do not set goto_locus on the new edges if
	id->reset_location is true.
	(copy_phis_for_bb): Force input_location on the arguments if
	id->reset_location is true.
	(expand_call_inline): Set id->reset_location if DECL_IGNORED_P
	is set on the function to be inlined.

2018-06-27  Stephan Bergmann  <sbergman@redhat.com>

	* doc/invoke.texi (Debugging Options): Add -gsplit-dwarf.

2018-06-27  Dimitar Dimitrov  <dimitar@dinux.eu>

	* lra-eliminations.c (update_reg_eliminate): Mark all spanning hard
	registers for Pmode.
	* lra-lives.c (check_pseudos_live_through_calls): Mark all spanning
	hard registers for the clobbered pseudo.

2018-06-27  Paul Koning  <ni1d@arrl.net>

	* common/config/pdp11/pdp11-common.c (pdp11_handle_option): Handle
	mutually exclusive options.
	* config/pdp11/constraints.md (h): New constraint.
	(O): Update definition to match shift code generation.
	(D): New constraint.
	* config/pdp11/pdp11-modes.def (CCNZ): Define mode.
	(CCFP): Remove.
	* config/pdp11/pdp11-protos.h (int_no_side_effect_operand): New
	function.
	(output_jump): Change arguments.
	(pdp11_fixed_cc_regs): New function.
	(pdp11_cc_mode): Ditto.
	(pdp11_expand_shift): Ditto.
	(pdp11_assemble_shift): Ditto.
	(pdp11_small_shift): Ditto.
	(pdp11_branch_cost): Remove.
	* config/pdp11/pdp11.c (pdp11_assemble_integer): Remove comments
	from output.
	(pdp11_register_move_cost): Update for CC registers.
	(pdp11_rtx_costs): Add case for LSHIFTRT.
	(pdp11_output_jump): Add CCNZ mode conditional branches.
	(notice_update_cc_on_set): Remove.
	(pdp11_cc_mode): New function.
	(simple_memory_operand): Correct pre/post decrement case.
	(no_side_effect_operand): New function.
	(pdp11_regno_reg_class): Add CC_REGS class.
	(pdp11_fixed_cc_regs): New function.
	(pdp11_small_shift): New function.
	(pdp11_expand_shift): New function to expand shift insns.
	(pdp11_assemble_shift): New function to output shifts.
	(pdp11_branch_cost): Remove.
	(pdp11_modes_tieable_p): Make QI/HI modes tieable.
	* config/pdp11/pdp11.h (SIZE_TYPE): Ensure 16-bit type.
	(WCHAR_TYPE): Ditto.
	(PTRDIFF_TYPE): Ditto.
	(ADJUST_INSN_LENGTH): New macro.
	(FIXED_REGISTERS): Add CC registers.
	(CALL_USED_REGISTERS): Ditto.
	(reg_class): Ditto.
	(REG_CLASS_NAMES): Ditto.
	(REG_CLASS_CONTENTS): Ditto.
	(SELECT_CC_MODE): Use new function.
	(TARGET_FLAGS_REGNUM): New macro.
	(TARGET_FIXED_CONDITION_CODE_REGS): Ditto.
	(cc0_reg_rtx): Remove.
	(CC_STATUS_MDEP): Remove.
	(CC_STATUS_MDEFP_INIT): Remove.
	(CC_IN_FPU): Remove.
	(NOTICE_UPDATE_CC): Remove.
	(REGISTER_NAMES): Add CC registers.
	(BRANCH_COST): Change to constant 1.
	* config/pdp11/pdp11.md: Rewrite for CCmode condition code
	handling.
	* config/pdp11/pdp11.opt (mbcopy): Remove.
	(mbcopy-builtin): Remove.
	(mbranch-cheap): Remove.
	(mbranch-expensive): Remove.
	* config/pdp11/predicates.md (expand_shift_operand): Update to
	match shift code generation.
	(ccnz_operator): New predicate.
	* doc/invoke.texi (PDP-11 Options): Remove deleted options
	-mbcopy, -mbcopy-builtin, -mbranch-cheap, -mbranch-expensive.
	Remove non-existent option -mabshi, -mno-abshi.  Document mutually
	exclusive options.
	* doc/md.texi (PDP-11): Document new D and h constraints.  Update
	description of O constraint.

2018-06-27  Jeff Law  <law@redhat.com>
	    Austin Law  <austinklaw@gmail.com>

	* config/v850/v850.md (addsi3_set_flags): New pattern.
	(subsi3_set_flags, negsi2_set_flags, andsi3_set_flags): Likewise.
	(iorsi3_set_flags, xorsi3_set_flags, one_cmplsi2_set_flags): Likewise.
	(zero_extendhisi2_v850_set_flags): Likewise.
	(zero_extendqisi2_v850_set_flags): Likewise.
	(ashlsi3_set_flags, ashlsi3_v850e2_set_flags): Likewise.
	(lshrsi3_set_flags, lshrsi3_v850e2_set_flags): Likewise.
	(ashrsi3_set_flags, ashrsi3_v850e2_set_flags): Likewise.

	* config/v850/v850-protos.h (notice_update_cc): Remove.
	* config/v850/v850.c (v850_compare_op0, v850_compare_op1): Remove.
	(v850_print_operand): Handle 'D' and "d".
	(v850_select_cc_mode): Remove ATTRIBUTE_UNUSED for last argument.
	Add handling of arithmetic/logical operations compared against zero.
	(v850_gen_float_compare): Remove ATTRIBUTE_UNUSED for last argument.
	Do not look at v850_compare_op, instead get mode from last argument.
	(v850_gen_compare): Remove
	(increment_stack): Use addsi3_clobber_flags to avoid splitting failure
	after reload for prologue insns.
	(expand_prologue): Account for CLOBBER of CC_REGNUM in various
	patterns.
	(construct_save_jarl): Likewise.
	(TARGET_FLAGS_REGNUM): Define.
	* config/v850/v850.h (v850_compare_op0, v850_compare_op1): Remove.
	(NOTICE_UPDATE_CC): Remove.
	* config/v850/v850.md (v850_tst1): Use (reg:CCZ CC_REGNUM) rather
	than cc0.  Conditionalize on reload_completed.
	(cmpsi_insn, setfcc_insn): Likewise.
	(tst1 splitter): Turn into define_and_split which sets the flags
	after reload.
	(cstoresi4, cbranchsf4, cbranchdf4, cbranchsi4_insn): Likewise.
	(cbranchsi4, branch_normal, branch_invert): Do not expose cc0 here.
	(cstoresf4, cstoredf4): Clobber the flags.
	(cmpsi, cmpsf, cmpdf): Remove expanders.
	(setf_insn): Remove pattern.
	(addsi3): Turn into define_and_split which clobbers the flags after
	reload and a suitable pattern (addsi3_clobber_flags) for use after
	reload.
	(subsi3, negsi2, andsi3, iorsi3, xorsi3, one_cmplsi2) Likewise.
	(ashlsi3, ashlsi3_v850e2, lshrsi3, lsh4si3_v850e2): Likewise.
	(ashrsi3, ashrsi3_v850e2): Likewise.
	(bins): Clobber the flags.
	(movsicc_normal_cc, movsicc_normal, movsicc_tst1): Likewise.
	(movsicc_tst1_revesed, sasf, swap and rotate patterns): Likewise.
	(fix_loop_counter, call_internal_short, call_internal_long): Likewise.
	(call_value_internal_short, call_value_internal_long): Likewise.
	(callt_save_interrupt, callt_return_interrupt): Likewise.
	(save_interrupt, return_interrupt): Likewise.
	(callt_save_all_interrupt, save_all_interrupt): Likewise.
	(_save_all_interrupt, callt_restore_all_interrupt): Likewise.
	(restore_all_interrupt, _restore_all_interrupt): Likewise.
	(All FP comparisons): Only allow after reload has completed.
	(trfsr): Likewise.
	(divh, divhu): Tweak output template.
	(branch_z_normal, branch_z_invert): Remove
	(branch_nz_normal, branch_nz_invert): Likewise.
	(extendhisi_insn, extendqisi_insn): Do not clobber flags.

	* config/v850/v850-modes.def (CCZ, CCNZ): Add new modes.
	* config/v850/v850.c (notice_update_cc): Remove.
	* config/v850/v850.h  (CC_OVERFLOW_UNUSABLE): Remove
	(CC_NO_CARRY): Likewise.
	(NOTICE_UPDATE_CC): Define to nothing.
	* config/v850/v850.md: Remove block comment on cc0 handling
	Remove "cc" attribute from all patterns.  Remove cc_status handling
	from all patterns.  Minor formatting fixes.

2018-06-27  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-cores.def (cortex-a76): New entry.
	(cortex-a76.cortex-a55): Likewise.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi (AArch64 Options): Document cortex-a76 and
	cortex-a76.cortex-a55.

2018-06-27  Jeff Law  <law@redhat.com>

	* config/v850/t-v850 (MULTILIB_OPTIONS): Remove 8byte-align.
	(MULTILIB_DIRNAMES): Similarly.

2018-06-27  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple.h (gimple_return_retbnd): Delete.
	(gimple_return_set_retbnd): Likewise.
	* cgraphunit.c (cgraph_node::expand_thunk): Remove call to
	gimple_return_set_retbnd.
	* gimple-pretty-print.c (dump_gimple_return): Remove call to
	gimple_return_retbnd and adjust.
	* tree-inline.h (struct copy_body_data): Remove retbnd field.
	* tree-inline.c (remap_gimple_stmt): Remove handling of retbnd.
	Explicitly return NULL in a couple more cases.  Move assertion
	on debug statements and remove unreachable code.
	(reset_debug_binding): Do not test id->retbnd.
	(expand_call_inline): Do not set it.

2018-06-27  Rasmus Villemoes  <rv@rasmusvillemoes.dk>

	* configure.ac: Add --disable-gcov option.
	* configure: Regenerate.
	* Makefile.in: Honour @enable_gcov@.
	* doc/install.texi: Document --disable-gcov.

2018-06-27  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (cortex-a76): New entry.
	(cortex-a76.cortex-a55): Likewise.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Likewise.
	* config/arm/driver-arm.c (arm_cpu_table): Add Cortex-A76 entry.
	* doc/invoke.texi (ARM Options): Document cortex-a76 and
	cortex-a76.cortex-a55.

2018-06-27  Tamar Christina  <tamar.christina@arm.com>

	PR target/85769
	* config/aarch64/aarch64.md (*movhf_aarch64): Add dup v0.4h pattern.

2018-06-27  Siddhesh Poyarekar  <siddhesh@sourceware.org>

	* config/aarch64/aarch64.h (CALL_USE_REGISTERS): Fix obsolete
	comment.
	(EPILOGUE_USES): Likewise.

2018-06-26  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-inline.c (remap_location): New function extracted from...
	(copy_edges_for_bb): Add ID parameter.  Remap goto_locus.
	(copy_phis_for_bb): ...here.  Call remap_location.
	(copy_cfg_body): Adjust call to copy_edges_for_bb.

2018-06-26  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (expand_block_clear): Don't use
	unaligned vsx for 16B memset.

2018-06-26  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/86285
	* config/rs6000/rs6000.c (rs6000_init_builtins): Do not set
	ieee128_float_type_node to long_double_type_node unless
	TARGET_LONG_DOUBLE_128 is set.

2018-06-26  David Malcolm  <dmalcolm@redhat.com>

	* cfgloop.c (get_loop_location): Convert return type from
	location_t to dump_user_location_t, replacing INSN_LOCATION lookups
	by implicit construction from rtx_insn *, and using
	dump_user_location_t::from_function_decl for the fallback case.
	* cfgloop.h (get_loop_location): Convert return type from
	location_t to dump_user_location_t.
	* cgraphunit.c (walk_polymorphic_call_targets): Update call to
	dump_printf_loc to pass in a dump_location_t rather than a
	location_t, via the gimple stmt.
	* coverage.c (get_coverage_counts): Update calls to
	dump_printf_loc to pass in dump_location_t rather than a
	location_t.
	* doc/optinfo.texi (Dump types): Convert example of
	dump_printf_loc from taking "locus" to taking "insn".  Update
	description of the "_loc" calls to cover dump_location_t.
	* dumpfile.c: Include "backend.h", "gimple.h", "rtl.h", and
	"selftest.h".
	(dump_user_location_t::dump_user_location_t): New constructors,
	from gimple *stmt and rtx_insn *.
	(dump_user_location_t::from_function_decl): New function.
	(dump_loc): Make static.
	(dump_gimple_stmt_loc): Convert param "loc" from location_t to
	const dump_location_t &.
	(dump_generic_expr_loc): Delete.
	(dump_printf_loc): Convert param "loc" from location_t to
	const dump_location_t &.
	(selftest::test_impl_location): New function.
	(selftest::dumpfile_c_tests): New function.
	* dumpfile.h: Include "profile-count.h".
	(class dump_user_location_t): New class.
	(struct dump_impl_location_t): New struct.
	(class dump_location_t): New class.
	(dump_printf_loc): Convert 2nd param from source_location to
	const dump_location_t &.
	(dump_generic_expr_loc): Delete.
	(dump_gimple_stmt_loc): Convert 2nd param from source_location to
	const dump_location_t &.
	* gimple-fold.c (fold_gimple_assign): Update call to
	dump_printf_loc to pass in a dump_location_t rather than a
	location_t, via the gimple stmt.
	(gimple_fold_call): Likewise.
	* gimple-loop-interchange.cc
	(loop_cand::analyze_iloop_reduction_var): Update for change to
	check_reduction_path.
	(tree_loop_interchange::interchange): Update for change to
	find_loop_location.
	* graphite-isl-ast-to-gimple.c (scop_to_isl_ast): Update for
	change in return-type of find_loop_location.
	(graphite_regenerate_ast_isl): Likewise.
	* graphite-optimize-isl.c (optimize_isl): Likewise.
	* graphite.c (graphite_transform_loops): Likewise.
	* ipa-devirt.c (ipa_devirt): Update call to dump_printf_loc to
	pass in a dump_location_t rather than a location_t, via the
	gimple stmt.
	* ipa-prop.c (ipa_make_edge_direct_to_target): Likewise.
	* ipa.c (walk_polymorphic_call_targets): Likewise.
	* loop-unroll.c (report_unroll): Convert "locus" param from
	location_t to dump_location_t.
	(decide_unrolling): Update for change to get_loop_location's
	return type.
	* omp-grid.c (struct grid_prop): Convert field "target_loc" from
	location_t to dump_user_location_t.
	(grid_find_single_omp_among_assignments_1): Updates calls to
	dump_printf_loc to pass in a dump_location_t rather than a
	location_t, via the gimple stmt.
	(grid_parallel_clauses_gridifiable): Convert "tloc" from
	location_t to dump_location_t.  Updates calls to dump_printf_loc
	to pass in a dump_location_t rather than a location_t, via the
	gimple stmt.
	(grid_inner_loop_gridifiable_p): Likewise.
	(grid_dist_follows_simple_pattern): Likewise.
	(grid_gfor_follows_tiling_pattern): Likewise.
	(grid_target_follows_gridifiable_pattern): Likewise.
	(grid_attempt_target_gridification): Convert initialization
	of local "grid" from memset to zero-initialization; FIXME: does
	this require C++11?  Update call to dump_printf_loc to pass in a
	optinfo_location rather than a location_t, via the gimple stmt.
	* profile.c (read_profile_edge_counts): Updates call to
	dump_printf_loc to pass in a dump_location_t rather than a
	location_t
	(compute_branch_probabilities): Likewise.
	* selftest-run-tests.c (selftest::run_tests): Call
	dumpfile_c_tests.
	* selftest.h (dumpfile_c_tests): New decl.
	* tree-loop-distribution.c (pass_loop_distribution::execute):
	Update for change in return type of find_loop_location.
	* tree-parloops.c (parallelize_loops): Likewise.
	* tree-ssa-loop-ivcanon.c (try_unroll_loop_completely): Convert
	"locus" from location_t to dump_user_location_t.
	(canonicalize_loop_induction_variables): Likewise.
	* tree-ssa-loop-ivopts.c (tree_ssa_iv_optimize_loop): Update
	for change in return type of find_loop_location.
	* tree-ssa-loop-niter.c (number_of_iterations_exit): Update call
	to dump_printf_loc to pass in a dump_location_t rather than a
	location_t, via the stmt.
	* tree-ssa-sccvn.c (eliminate_dom_walker::before_dom_children):
	Likewise.
	* tree-vect-loop-manip.c (find_loop_location): Convert return
	type from source_location to dump_user_location_t.
	(vect_do_peeling): Update for above change.
	(vect_loop_versioning): Update for change in type of
	vect_location.
	* tree-vect-loop.c (check_reduction_path): Convert "loc" param
	from location_t to dump_user_location_t.
	(vect_estimate_min_profitable_iters): Update for change in type
	of vect_location.
	* tree-vect-slp.c (vect_print_slp_tree): Convert param "loc" from
	location_t to dump_location_t.
	(vect_slp_bb): Update for change in type of vect_location.
	* tree-vectorizer.c (vect_location): Convert from source_location
	to dump_user_location_t.
	(try_vectorize_loop_1): Update for change in vect_location's type.
	(vectorize_loops): Likewise.
	(increase_alignment): Likewise.
	* tree-vectorizer.h (vect_location): Convert from source_location
	to dump_user_location_t.
	(find_loop_location): Convert return type from source_location to
	dump_user_location_t.
	(check_reduction_path): Convert 1st param from location_t to
	dump_user_location_t.
	* value-prof.c (check_counter): Update call to dump_printf_loc to
	pass in a dump_user_location_t rather than a location_t; update
	call to error_at for change in type of "locus".
	(check_ic_target): Update call to dump_printf_loc to
	pass in a dump_user_location_t rather than a location_t, via the
	call_stmt.

2018-06-26  Robin Dapp  <rdapp@linux.vnet.ibm.com>

	* config/s390/s390.h (enum processor_flags): Do not use
	default tune parameter when -march was specified.

2018-06-26  Jakub Jelinek  <jakub@redhat.com>

	PR target/86314
	* config/i386/i386.md (setcc + movzbl to xor + setcc peephole2s):
	Check reg_overlap_mentioned_p in addition to reg_set_p with the same
	operands.

2018-06-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86287
	PR bootstrap/86316
	* tree-vect-loop.c (vect_transform_loop_stmt): Fix read-after-free.
	(vect_analyze_loop): Initialize n_stmts.

2018-06-26  Richard Biener  <rguenther@suse.de>

	PR middle-end/86271
	* fold-const.c (fold_convertible_p): Pointer extension
	isn't valid.

2018-06-26  Alexandre Oliva <aoliva@redhat.com>

	PR debug/86064
	* dwarf2out.c (loc_list_has_views): Adjust comments.
	(dw_loc_list): Split single cross-partition range with
	nonzero locview.

2018-06-25  Jeff Law  <law@redhat.com>

	* common/config/v850/v850-common.c (TARGET_DEFAULT_TARGET_FLAGS): Turn
	on -mbig-switch by default.

	* config/v850/predicates.md (const_float_1_operand): Fix match_code
	test.
	(const_float_0_operand): Remove unused predicate.
	* config/v850/v850.md (define_constants): Remove UNSPEC_LOOP.
	(define_c_enum unspec): Add LOOP, RCP and RSQRT constants.
	(recipsf2): New expander.  Original pattern now called
	(recipsf2_insn).
	(recipdf2, recipdf2_insn): Similarly.
	(rsqrtsf2, rsqrtsf2_insn): Similarly
	(rsqrtdf2, rsqrtdf2_insn): Similarly

2018-06-26  Gerald Pfeifer  <gerald@pfeifer.com>

	* ginclude/stddef.h: Remove an obsolete comment on FreeBSD 5.
	Simplify logic for FreeBSD (twice).

2018-06-25  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86204
	* tree-ssa-strlen.c (handle_builtin_strlen): Avoid storing
	a strnlen result if it's less than the length of the string.

2018-06-25  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/85700
	* gimple-fold.c (gimple_fold_builtin_strncat): Adjust comment.
	* tree-ssa-strlen.c (is_strlen_related_p): Handle integer subtraction.
	(maybe_diag_stxncpy_trunc): Distinguish strncat from strncpy.

2018-06-25  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (Zero-length arrays): Update and clarify.

2018-06-25  Michael Meissner  <meissner@linux.ibm.com>

	* config.gcc (powerpc64le*): Revert January 16th, 2018 patch that
	added IEEE/IBM long double multilib support on PowerPC little
	endian Linux systems.
	* config/rs6000/linux64.h (MULTILIB_DEFAULTS_IEEE): Likewise.
	(MULTILIB_DEFAULTS): Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Likewise.
	* config/rs6000/rs6000.h (TARGET_IEEEQUAD_MULTILIB): Likewise.
	* config/rs6000/t-ldouble-linux64le-ibm: Delete, no longer used.
	* config/rs6000/t-ldouble-linux64le-ieee: Delete, no longer used.

2018-06-25  Alexander Monakov  <amonakov@ispras.ru>

	PR middle-end/86311
	* sort.cc (REORDER_23): Avoid memcpy with same destination and source.
	(REORDER_45): Likewise.

2018-06-25  Jeff Law  <law@redhat.com>

	* config/v850/v850.md (divmodhi4): Make sure to sign extend the
	dividend to 32 bits.  Adjust length.
	(udivmodhi4): Cleanup output template.  Fix length.

2018-06-25  Carl Love  <cel@us.ibm.com>

	* config/rs6000/vsx.md: Change word selector to prefered location.

2018-06-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86304
	* tree-vectorizer.c (vectorize_loops): Walk over new possibly
	epilogue-if-converted loops as well.

2018-06-25  Jan Hubicka  <hubicka@ucw.cz>

	* lto-section-out.c (lto_begin_section): Do not print section
	name for noaddr and unnumbered dumps.

2018-06-25  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (struct vec_info_shared): New structure
	with parts split out from struct vec_info and loop_nest from
	struct _loop_vec_info.
	(struct vec_info): Adjust accordingly.
	(struct _loop_vec_info): Likewise.
	(LOOP_VINFO_LOOP_NEST): Adjust.
	(LOOP_VINFO_DATAREFS): Likewise.
	(LOOP_VINFO_DDRS): Likewise.
	(struct _bb_vec_info): Likewise.
	(BB_VINFO_DATAREFS): Likewise.
	(BB_VINFO_DDRS): Likewise.
	(struct _stmt_vec_info): Add dr_aux member.
	(DR_VECT_AUX): Adjust to refer to member of DR_STMTs vinfo.
	(DR_MISALIGNMENT_UNINITIALIZED): New.
	(set_dr_misalignment): Adjust.
	(dr_misalignment): Assert misalign isn't DR_MISALIGNMENT_UNINITIALIZED.
	(vect_analyze_loop): Adjust prototype.
	(vect_analyze_loop_form): Likewise.
	* tree-vect-data-refs.c (vect_analyze_data_ref_dependences):
	Compute dependences lazily.
	(vect_record_base_alignments): Use shared datarefs/ddrs.
	(vect_verify_datarefs_alignment): Likewise.
	(vect_analyze_data_refs_alignment): Likewise.
	(vect_analyze_data_ref_accesses): Likewise.
	(vect_analyze_data_refs): Likewise.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Add
	constructor parameter for shared part.
	(vect_analyze_loop_form): Pass in shared part and adjust.
	(vect_analyze_loop_2): Pass in storage for the number of
	stmts.  Move loop nest finding to the caller.  Compute
	datarefs lazily.
	(vect_analyze_loop): Pass in shared part.
	(vect_transform_loop): Verify shared datarefs are unchanged.
	* tree-vect-slp.c (_bb_vec_info::_bb_vec_info): Add
	constructor parameter for shared part.
	(vect_slp_analyze_bb_1): Pass in shared part and adjust.
	(vect_slp_bb): Verify shared datarefs are unchanged before
	transform.
	* tree-vect-stmts.c (ensure_base_align): Adjust for DR_AUX
	change.
	(new_stmt_vec_info): Initialize DR_AUX misalignment to
	DR_MISALIGNMENT_UNINITIALIZED.
	* tree-vectorizer.c (vec_info::vec_info): Add constructor
	parameter for shared part.
	(vec_info::~vec_info): Adjust.
	(vec_info_shared::vec_info_shared): New.
	(vec_info_shared::~vec_info_shared): Likewise.
	(vec_info_shared::save_datarefs): Likewise.
	(vec_info_shared::check_datarefs): Likewise.
	(try_vectorize_loop_1): Construct shared part live for analyses
	of a single loop for multiple vector sizes.
	* tree-parloops.c (gather_scalar_reductions): Adjust.

2018-06-25  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_find_stmt_data_reference): Modify
	DR for SIMD lane accesses here and mark DR with (void *)-1 aux.
	(vect_analyze_data_refs): Remove similar code from here and
	simplify accordingly.

2018-06-25  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_check_gather_scatter): Fail
	for reverse storage order accesses rather than asserting
	they cannot happen here.

2018-06-25  Tom de Vries  <tdevries@suse.de>

	PR debug/86257
	* config/i386/i386.md (define_insn "*tls_global_dynamic_64_<mode>"):
	Use data16 instead of .byte for insn prefix.

2018-06-25  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR C++/86082
	* parser.c (make_char_string_pack): Pass this literal chars
	through cpp_interpret_string.
	(cp_parser_userdef_numeric_literal): Check the result of
	make_char_string_pack.

2018-06-24  Maya Rashish  <coypu@sdf.org>

	* ginclude/stddef.h: Simplify conditions around avoiding
	re-definition of __size_t.

2018-06-22  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (tree_is_indexable): Make LABEL_DECL nonindexable
	unless it is forced or nonlocal; assert that we stream no IMPORTED_DECL.

2018-06-22  Maya Rashish  <coypu@sdf.org>

	* doc/invoke.texi (mno-fancy-math-387): Update for changes
	made to OpenBSD and NetBSD through the years.

2018-06-22  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Change
	behavior of vec_pack (vector double, vector double) to match
	behavior of vec_float2 (vector double, vector double).

2018-06-22  Olivier Hainque  <hainque@adacore.com>

	* gimplify.c (gimplify_function_tree): Prevent creation
	of a trampoline for the address of the current function
	passed to entry/exit instrumentation hooks.

2018-06-22  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/86222
	* config/rs6000/rs6000-string.c (expand_strn_compare): Handle -m32
	correctly.

2018-06-22  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/86263
	* tree-switch-conversion.c (jump_table_cluster::find_jump_tables):
	Bail out if is_enabled is false.
	* tree-switch-conversion.h (jump_table_cluster::is_enabled):
	New declaration.
	(jump_table_cluster::is_enabled): New function.

2018-06-22  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (DFS::DFS_write_tree_body): Do not stream
	BINFO_BASE_ACCESSES and BINFO_VPTR_FIELD.
	* tree-streamer-in.c (streamer_read_tree_bitfields): Likewise.
	(lto_input_ts_binfo_tree_pointers): Likewise.
	* tree-streamer-out.c (streamer_write_tree_bitfields,
	write_ts_binfo_tree_pointers): Likewise.
	* tree.c (free_lang_data_in_binfo): Clear BINFO_VPTR_FIELD.

2018-06-22  Jan Hubicka  <hubicka@ucw.cz>

	* tree.c (free_lang_data_in_type): Free all TYPE_VFIELDs.

2018-06-22  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (get): Make it pure and inline move
	functionality from ::get function.
	(get): Remove and inline into ::get and ::get_create.
	(get_create): Move code from ::get function.

2018-06-22  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR target/85994
	* config/i386/sol2.h (CPP_SPEC): Don't pass -P for
	-x assembler-with-cpp.

2018-06-22  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/sol2.h (TARGET_OS_CPP_BUILTINS): Define
	_FILE_OFFSET_BITS=64 for C++.

2018-06-21  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.md (extendtfif2): Add missing 128-bit
	conversion insn that shows up when pr85657-3.c is compiled using
	IEEE 128-bit long double.
	(neg<mode>2_internal): Use the correct mode to check whether the
	mode is IBM extended.
	* config/rs6000/rs6000.c (init_float128_ieee): Prevent complex
	multiply and divide external functions from being created more
	than once.

2018-06-21  Eric Botcazou  <ebotcazou@adacore.com>

	* cfgrtl.c (fixup_reorder_chain): Do not emit NOPs in DECL_IGNORED_P
	functions.
	(rtl_merge_blocks): Likewise.  Do not emit a NOP if the location of
	the edge can be forwarded.
	(cfg_layout_merge_blocks): Likewise.

2018-06-21  Eric Botcazou  <ebotcazou@adacore.com>

	* except.c (finish_eh_generation): Commit edge insertions only after
	the EH edges have been redirected from post-landing to landing pads.

2018-06-21  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-nested.c (get_frame_type): Use create_tmp_var_raw instead of
	create_tmp_var_for to create the FRAME decl.
	(finalize_nesting_tree_1): Do not unchain the FRAME decl.

2018-06-21  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-inline.c (copy_edges_for_bb): Minor tweak.
	(maybe_move_debug_stmts_to_successors): Also reset the locus of the
	debug statement when resetting its value.
	(expand_call_inline): Copy the locus of the call onto the assignment
	of the return value, if any.  Use local variable in more cases.

2018-06-21  Martin Liska  <mliska@suse.cz>

	* ipa-pure-const.c (propagate_nothrow): Use
	funct_state_summaries->get.
	(dump_malloc_lattice): Likewise.
	(propagate_malloc): Likewise.

2018-06-21  Richard Biener  <rguenther@suse.de>

	* lto-streamer-out.c (DFS::DFS_write_tree_body): Update outdated
	comment.  Follow BLOCK_ABSTRACT_ORIGIN unconditionally.
	* tree-streamer-in.c (lto_input_ts_block_tree_pointers): Update
	comment.
	* tree-streamer-out.c (write_ts_block_tree_pointers): Stream
	BLOCK_ABSTRACT_ORIGIN unconditionally.

2018-06-21  David Malcolm  <dmalcolm@redhat.com>

	* ipa-cp.c (ipcp_driver): Set edge_clone_summaries to NULL after
	deleting it.
	* ipa-reference.c (ipa_reference_c_finalize): Delete
	ipa_ref_opt_sum_summaries and set it to NULL.

2018-06-21  Tom de Vries  <tdevries@suse.de>

	PR tree-optimization/85859
	* tree-ssa-tail-merge.c (stmt_local_def): Copy gimple_is_call
	test with comment from bb_no_side_effects_p.

2018-06-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86232
	* tree-ssa-loop-niter.c (number_of_iterations_popcount): Adjust
	max for constant niter.

2018-06-21  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/aarch64/aarch64-simd.md
	(*aarch64_crypto_aes<aes_op>v16qi_xor_combine): New.

2018-06-21  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/aarch64/aarch64-simd.md (aarch64_crypto_aes<aes_op>v16qi):
	Make opernads of the unspec commutative.

2018-06-21  Richard Biener  <rguenther@suse.de>

	* tree-data-ref.c (dr_step_indicator): Handle NULL DR_STEP.
	* tree-vect-data-refs.c (vect_analyze_possibly_independent_ddr):
	Avoid calling vect_mark_for_runtime_alias_test with gathers or scatters.
	(vect_analyze_data_ref_dependence): Re-order checks to deal with
	NULL DR_STEP.
	(vect_record_base_alignments): Do not record base alignment
	for gathers or scatters.
	(vect_compute_data_ref_alignment): Drop return value that is always
	true.  Bail out early for gathers or scatters.
	(vect_enhance_data_refs_alignment): Bail out early for gathers
	or scatters.
	(vect_find_same_alignment_drs): Likewise.
	(vect_analyze_data_refs_alignment): Remove dead code.
	(vect_slp_analyze_and_verify_node_alignment): Likewise.
	(vect_analyze_data_refs): For possible gathers or scatters do
	not create an alternate DR, just check their possible validity
	and mark them.  Adjust DECL_NONALIASED handling to not rely
	on DR_BASE_ADDRESS.
	* tree-vect-loop-manip.c (vect_update_inits_of_drs): Do not
	update inits of gathers or scatters.
	* tree-vect-patterns.c (vect_recog_mask_conversion_pattern):
	Also copy gather/scatter flag to pattern vinfo.

2018-06-20  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Change
	behavior of vec_packsu (vector unsigned long long, vector unsigned
	long long) to match behavior of vec_packs with same signature.

2018-06-20  Chung-Lin Tang <cltang@codesourcery.com>
	    Thomas Schwinge <thomas@codesourcery.com>
	    Cesar Philippidis  <cesar@codesourcery.com>

	* gimplify.c (gimplify_scan_omp_clauses): Add support for
	OMP_CLAUSE_{IF_PRESENT,FINALIZE}.
	(gimplify_adjust_omp_clauses): Likewise.
	(gimplify_oacc_declare_1): Add support for GOMP_MAP_RELEASE, remove
	support for GOMP_MAP_FORCE_{ALLOC,TO,FROM,TOFROM}.
	(gimplify_omp_target_update): Update handling of acc update and
	enter/exit data.
	* omp-low.c (install_var_field): Remove unused parameter
	base_pointers_restrict.
	(scan_sharing_clauses): Remove base_pointers_restrict parameter.
	Update call to install_var_field. Handle OMP_CLAUSE_{IF_PRESENT,
	FINALIZE}
	(omp_target_base_pointers_restrict_p): Delete.
	(scan_omp_target): Update call to scan_sharing_clauses.
	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_{IF_PRESENT,
	FINALIZE}.
	* tree-nested.c (convert_nonlocal_omp_clauses): Handle
	OMP_CLAUSE_{IF_PRESENT,FINALIZE}.
	(convert_local_omp_clauses): Likewise.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* tree.c (omp_clause_num_ops): Add entries for 	OMP_CLAUSE_{IF_PRESENT,
	FINALIZE}.
	(omp_clause_code_name): Likewise.

2018-06-20  Jakub Jelinek  <jakub@redhat.com>

	PR debug/86194
	* var-tracking.c (use_narrower_mode_test): Check if shift amount can
	be narrowed.

	PR tree-optimization/86231
	* tree-vrp.c (union_ranges): For (  [  )  ] or (   )[   ] range and
	anti-range don't overwrite *vr0min before using it to compute *vr0max.

2018-06-20  Tom de Vries  <tdevries@suse.de>

	PR tree-optimization/86097
	* tree-ssa-loop-manip.c (canonicalize_loop_ivs): Also convert *nit to
	iv type if signedness of iv type is not the same as that of *nit.

2018-06-20  Jakub Jelinek  <jakub@redhat.com>

	* cfgrtl.c (rtl_verify_edges): Formatting fix.  If bb->preds has any
	EDGE_EH edges, verify they are all EDGE_EH.

2018-06-20  Maya Rashish  <coypu@sdf.org>

	* ginclude/stddef.h: Limit #include <machine/ansi.h> to NetBSD.

2018-06-20  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-tuning-flags.def (no_ldp_stp_qregs): New.
	* config/aarch64/aarch64.c (xgene1_tunings): Add
	AARCH64_EXTRA_TUNE_NO_LDP_STP_QREGS to tune_flags.
	(aarch64_mode_valid_for_sched_fusion_p):
	Allow 16-byte modes.
	(aarch64_classify_address): Allow 16-byte modes for load_store_pair_p.
	* config/aarch64/aarch64-ldpstp.md: Add peepholes for LDP STP of
	128-bit modes.
	* config/aarch64/aarch64-simd.md (load_pair<VQ:mode><VQ2:mode>):
	New pattern.
	(vec_store_pair<VQ:mode><VQ2:mode>): Likewise.
	* config/aarch64/iterators.md (VQ2): New mode iterator.

2018-06-20  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (jump_table_cluster::can_be_handled):
	Change default ratio from 10 to 8.

2018-06-20  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (jump_table_cluster::find_jump_tables):
	New.
	(bit_test_cluster::find_bit_tests): Likewise.
	(switch_decision_tree::analyze_switch_statement): Find clusters.
	* tree-switch-conversion.h (struct jump_table_cluster): Document
	hierarchy.

2018-06-20  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (switch_conversion::collect):
	Record m_uniq property.
	(switch_conversion::expand): Bail out for special conditions.
	(group_cluster::~group_cluster): New.
	(group_cluster::group_cluster): Likewise.
	(group_cluster::dump): Likewise.
	(jump_table_cluster::emit): New.
	(switch_decision_tree::fix_phi_operands_for_edges): New.
	(struct case_node): Remove struct.
	(jump_table_cluster::can_be_handled): New.
	(case_values_threshold): Moved to header.
	(reset_out_edges_aux): Likewise.
	(jump_table_cluster::is_beneficial): New.
	(bit_test_cluster::can_be_handled): Likewise.
	(add_case_node): Remove.
	(bit_test_cluster::is_beneficial): New.
	(case_bit_test::cmp): New.
	(bit_test_cluster::emit): New.
	(expand_switch_as_decision_tree_p): Remove.
	(bit_test_cluster::hoist_edge_and_branch_if_true): New.
	(fix_phi_operands_for_edge): Likewise.
	(switch_decision_tree::analyze_switch_statement): New.
	(compute_cases_per_edge): Move ...
	(switch_decision_tree::compute_cases_per_edge): ... here.
	(try_switch_expansion): Likewise.
	(switch_decision_tree::try_switch_expansion): Likewise.
	(record_phi_operand_mapping): Likewise.
	(switch_decision_tree::record_phi_operand_mapping): Likewise.
	(emit_case_decision_tree): Likewise.
	(switch_decision_tree::emit): Likewise.
	(balance_case_nodes): Likewise.
	(switch_decision_tree::balance_case_nodes): Likewise.
	(dump_case_nodes): Likewise.
	(switch_decision_tree::dump_case_nodes): Likewise.
	(emit_jump): Likewise.
	(switch_decision_tree::emit_jump): Likewise.
	(emit_cmp_and_jump_insns): Likewise.
	(switch_decision_tree::emit_cmp_and_jump_insns): Likewise.
	(emit_case_nodes): Likewise.
	(switch_decision_tree::emit_case_nodes): Likewise.
	(conditional_probability): Remove.
	* tree-switch-conversion.h (enum cluster_type): New.
	(PRINT_CASE): New.
	(struct cluster): Likewise.
	(cluster::cluster): Likewise.
	(struct simple_cluster): Likewise.
	(simple_cluster::simple_cluster): Likewise.
	(struct group_cluster): Likewise.
	(struct jump_table_cluster): Likewise.
	(struct bit_test_cluster): Likewise.
	(struct min_cluster_item): Likewise.
	(struct case_tree_node): Likewise.
	(case_tree_node::case_tree_node): Likewise.
	(jump_table_cluster::case_values_threshold): Likewise.
	(struct case_bit_test): Likewise.
	(struct switch_decision_tree): Likewise.
	(struct switch_conversion): Likewise.
	(switch_decision_tree::reset_out_edges_aux): Likewise.

2018-06-20  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (MAX_CASE_BIT_TESTS): Remove.
	(hoist_edge_and_branch_if_true): Likewise.
	(expand_switch_using_bit_tests_p): Likewise.
	(struct case_bit_test): Likewise.
	(case_bit_test_cmp): Likewise.
	(emit_case_bit_tests): Likewise.
	(switch_conversion::switch_conversion): New class.
	(struct switch_conv_info): Remove old struct.
	(collect_switch_conv_info): More to ...
	(switch_conversion::collect): ... this.
	(check_range): Likewise.
	(switch_conversion::check_range): Likewise.
	(check_all_empty_except_final): Likewise.
	(switch_conversion::check_all_empty_except_final): Likewise.
	(check_final_bb): Likewise.
	(switch_conversion::check_final_bb): Likewise.
	(create_temp_arrays): Likewise.
	(switch_conversion::create_temp_arrays): Likewise.
	(free_temp_arrays): Likewise.
	(gather_default_values): Likewise.
	(switch_conversion::gather_default_values): Likewise.
	(build_constructors): Likewise.
	(switch_conversion::build_constructors): Likewise.
	(constructor_contains_same_values_p): Likewise.
	(switch_conversion::contains_same_values_p): Likewise.
	(array_value_type): Likewise.
	(switch_conversion::array_value_type): Likewise.
	(build_one_array): Likewise.
	(switch_conversion::build_one_array): Likewise.
	(build_arrays): Likewise.
	(switch_conversion::build_arrays): Likewise.
	(gen_def_assigns): Likewise.
	(switch_conversion::gen_def_assigns): Likewise.
	(prune_bbs): Likewise.
	(switch_conversion::prune_bbs): Likewise.
	(fix_phi_nodes): Likewise.
	(switch_conversion::fix_phi_nodes): Likewise.
	(gen_inbound_check): Likewise.
	(switch_conversion::gen_inbound_check): Likewise.
	(process_switch): Use the newly created class.
	(switch_conversion::expand): New.
	(switch_conversion::~switch_conversion): New.
	* tree-switch-conversion.h: New file.

2018-06-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (NUM_PATTERNS, vect_recog_func_ptr): Move to
	tree-vect-patterns.c.
	* tree-vect-patterns.c (vect_supportable_direct_optab_p): New function.
	(vect_recog_dot_prod_pattern): Use it.  Remove the type_in argument.
	(vect_recog_sad_pattern): Likewise.
	(vect_recog_widen_sum_pattern): Likewise.
	(vect_recog_pow_pattern): Likewise.  Check for a null vectype.
	(vect_recog_widen_shift_pattern): Remove the type_in argument.
	(vect_recog_rotate_pattern): Likewise.
	(vect_recog_mult_pattern): Likewise.
	(vect_recog_vector_vector_shift_pattern): Likewise.
	(vect_recog_divmod_pattern): Likewise.
	(vect_recog_mixed_size_cond_pattern): Likewise.
	(vect_recog_bool_pattern): Likewise.
	(vect_recog_mask_conversion_pattern): Likewise.
	(vect_try_gather_scatter_pattern): Likewise.
	(vect_recog_widen_mult_pattern): Likewise.  Check for a null vectype.
	(vect_recog_over_widening_pattern): Likewise.
	(vect_recog_gather_scatter_pattern): Likewise.
	(vect_recog_func_ptr): Move from tree-vectorizer.h
	(vect_vect_recog_func_ptrs): Move further down the file.
	(vect_recog_func): Likewise.  Remove the third argument.
	(NUM_PATTERNS): Define based on vect_vect_recog_func_ptrs.
	(vect_pattern_recog_1): Expect the pattern function to do any
	necessary target tests.  Also expect it to provide a vector type.
	Remove the type_in handling.

2018-06-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_pattern_detected): New function.
	(vect_recog_dot_prod_patternm, vect_recog_sad_pattern)
	(vect_recog_widen_mult_pattern, vect_recog_widen_sum_pattern)
	(vect_recog_over_widening_pattern, vect_recog_widen_shift_pattern
	(vect_recog_rotate_pattern, vect_recog_vector_vector_shift_pattern)
	(vect_recog_mult_pattern, vect_recog_divmod_pattern)
	(vect_recog_mixed_size_cond_pattern, vect_recog_bool_pattern)
	(vect_recog_mask_conversion_pattern)
	(vect_try_gather_scatter_pattern): Likewise.

2018-06-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_get_internal_def): New function.
	(vect_recog_dot_prod_pattern, vect_recog_sad_pattern)
	(vect_recog_vector_vector_shift_pattern, check_bool_pattern)
	(search_type_for_mask_1): Use it.

2018-06-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_recog_dot_prod_pattern): Remove
	redundant WIDEN_SUM_EXPR handling.
	(vect_recog_sad_pattern): Likewise.

2018-06-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_recog_dot_prod_pattern): Remove
	redundant check that the types of a PLUS_EXPR or MULT_EXPR agree.
	(vect_recog_sad_pattern): Likewise PLUS_EXPR, ABS_EXPR and MINUS_EXPR.
	(vect_recog_widen_mult_pattern): Likewise MULT_EXPR.
	(vect_recog_widen_sum_pattern): Likewise PLUS_EXPR.

2018-06-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_call): Make sure that we
	use the stmt_vec_info of the original bb statement for the
	new zero assignment, even if the call is part of a pattern.

2018-06-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (_stmt_vec_info): Note above pattern_def_seq
	that the sequence is attached to the original statement rather
	than the pattern statement.
	* tree-vect-loop.c (vect_determine_vf_for_stmt): Take the
	PATTERN_DEF_SEQ from the original statement rather than
	the main pattern statement.
	* tree-vect-stmts.c (free_stmt_vec_info): Likewise.
	* tree-vect-patterns.c (vect_recog_dot_prod_pattern): Likewise.
	(vect_mark_pattern_stmts): Don't copy the PATTERN_DEF_SEQ.

2018-06-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vect_analyze_stmt): Move the handling of pattern
	definition statements before the early exit for statements that aren't
	live or relevant.
	* tree-vect-loop.c (vect_transform_loop_stmt): New function,
	split out from...
	(vect_transform_loop): ...here.  Process pattern definition
	statements without first checking whether the main pattern
	statement is live or relevant.

2018-06-19  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-cfgcleanup.c (tree_forwarder_block_p): Do not return false at
	-O0 if the locus represent UNKNOWN_LOCATION but have different values.

2018-06-19  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (select_block_compare_mode): Check
	TARGET_EFFICIENT_OVERLAPPING_UNALIGNED here instead of in caller.
	(do_and3, do_and3_mask, do_compb3, do_rotl3): New functions.
	(expand_block_compare): Change select_block_compare_mode call.
	(expand_strncmp_align_check): Use new functions, fix comment.
	(emit_final_str_compare_gpr): New function.
	(expand_strn_compare): Refactor and clean up code.
	* config/rs6000/vsx.md (vsx_mov<mode>_64bit): Remove *.

2018-06-19  Tony Reix  <tony.reix@atos.com>
	    Damien Bergamini  <damien.bergamini@atos.com>
	    David Edelsohn  <dje.gcc@gmail.com>

	* collect2.c (static_obj): New variable.
	(static_libs): New variable.
	(is_in_list): Uncomment declaration.
	(main): Track AIX libraries linked statically.
	(is_in_list): Uncomment definition.
	(scan_prog_file): Don't add AIX shared libraries initializer
	to constructor list if linking statically.

2018-06-19  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/xtensa.md (UNSPEC_FRAME_BLOCKAGE): New unspec
	constant.
	(allocate_stack, frame_blockage, *frame_blockage): New patterns.

2018-06-19  Jan Hubicka  <hubicka@ucw.cz>

	* tree.c (find_decls_types_r): Remove all non-VAR_DECLs from
	blocks.

2018-06-19  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (ix86_can_inline_p): Do not use
	ipa_fn_summaries::get_create.
	* ipa-cp.c (ipcp_cloning_candidate_p): Replace get_create with
	get.
	(devirtualization_time_bonus): Likewise.
	(ipcp_propagate_stage): Likewise.
	* ipa-fnsummary.c (redirect_to_unreachable): Likewise.
	(edge_set_predicate): Likewise.
	(evaluate_conditions_for_known_args): Likewise.
	(evaluate_properties_for_edge): Likewise.
	(ipa_call_summary::reset): Tranform to ...
	(ipa_call_summary::~ipa_call_summary): ... this.
	(ipa_fn_summary::reset): Transform to ...
	(ipa_fn_summary::~ipa_fn_summary): ... this.
	(ipa_fn_summary_t::remove): Rename to ...
	(ipa_fn_summary_t::remove_callees): ... this.
	(ipa_fn_summary_t::duplicate): Use placement new
	instead of memory copy.
	(ipa_call_summary_t::duplicate): Likewise.
	(ipa_call_summary_t::remove): Remove.
	(dump_ipa_call_summary): Change get_create to get.
	(ipa_dump_fn_summary): Dump only when summary exists.
	(analyze_function_body): Use symbol_summary::get instead
	of get_create.
	(compute_fn_summary): Likewise.
	(estimate_edge_devirt_benefit): Likewise.
	(estimate_edge_size_and_time): Likewise.
	(inline_update_callee_summaries): Likewise.
	(remap_edge_change_prob): Likewise.
	(remap_edge_summaries): Likewise.
	(ipa_merge_fn_summary_after_inlining): Likewise.
	(write_ipa_call_summary): Likewise.
	(ipa_fn_summary_write): Likewise.
	(ipa_free_fn_summary): Likewise.
	* ipa-fnsummary.h (struct GTY): Add new ctor and copy ctor.
	(struct ipa_call_summary): Likewise.
	* ipa-icf.c (sem_function::merge): Use symbol_summary::get instead
	of get_create.
	* ipa-inline-analysis.c (do_estimate_edge_time): Likewise.
	(estimate_size_after_inlining): Likewise.
	(estimate_growth): Likewise.
	(growth_likely_positive): Likewise.
	* ipa-inline-transform.c (clone_inlined_nodes): Likewise.
	(inline_call): Likewise.
	* ipa-inline.c (caller_growth_limits): Likewise.
	(can_inline_edge_p): Likewise.
	(can_inline_edge_by_limits_p): Likewise.
	(compute_uninlined_call_time): Likewise.
	(compute_inlined_call_time): Likewise.
	(want_inline_small_function_p): Likewise.
	(edge_badness): Likewise.
	(update_caller_keys): Likewise.
	(update_callee_keys): Likewise.
	(inline_small_functions): Likewise.
	(inline_to_all_callers_1): Likewise.
	(dump_overall_stats): Likewise.
	(early_inline_small_functions): Likewise.
	(early_inliner): Likewise.
	* ipa-profile.c (ipa_propagate_frequency_1): Likewise.
	* ipa-prop.c (ipa_make_edge_direct_to_target): Likewise.
	* ipa-pure-const.c (malloc_candidate_p): Likewise.
	* ipa-split.c (execute_split_functions): Likewise.
	* symbol-summary.h: Likewise.
	* tree-sra.c (ipa_sra_preliminary_function_checks): Likewise.

2018-06-19  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.c (try_vectorize_loop_1): Split out of ...
	(vectorize_loops): ... here.  Fix dbgcnt handling.
	(try_vectorize_loop): Wrap try_vectorize_loop_1.

2018-06-19  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/86197
	* config/rs6000/rs6000.md (rs6000_discover_homogeneous_aggregate): An
	ieee128 argument takes up only one (vector) register, not two (floating
	point) registers.

2018-06-19  Eric Botcazou  <ebotcazou@adacore.com>

	* gimplify.c (gimplify_init_constructor): Really never clear for an
	incomplete constructor if CONSTRUCTOR_NO_CLEARING is set.

2018-06-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86179
	* tree-vect-patterns.c (vect_pattern_recog_1): Clean up
	after failed recognition.

2018-06-18  Martin Sebor  <msebor@redhat.com>

	PR middle-end/85602
	* calls.c (maybe_warn_nonstring_arg): Handle strncat.
	* tree-ssa-strlen.c (is_strlen_related_p): Make extern.
	Handle integer subtraction.
	(maybe_diag_stxncpy_trunc): Handle nonstring source arguments.
	* tree-ssa-strlen.h (is_strlen_related_p): Declare.

2018-06-18  David Malcolm  <dmalcolm@redhat.com>

	* config/frv/frv-protos.h (frv_ifcvt_modify_insn): Strengthen 3rd
	param from rtx to rtx_insn *.
	* config/frv/frv.c (frv_ifcvt_add_insn): Likewise for "insn"
	param.
	(frv_ifcvt_modify_insn): Likwise.
	(frv_ifcvt_modify_final): Likwise for local "existing_insn",
	adding an as_a <rtx_insn *> cast.  Likewise for local "insn".
	* config/mips/mips.c (r10k_insert_cache_barriers): Add an
	as_a <rtx_insn *> cast to local "unprotected_region" once
	it's been established that it's not NULL or pc_rtx.
	* config/nds32/nds32-relax-opt.c (nds32_group_insns): Strengthen
	param "sethi" from rtx to rtx_insn *.
	(nds32_group_float_insns): Likewise for param "insn".
	* config/vax/vax-protos.h (vax_output_int_add): Likewise for 1st
	param.
	(vax_output_int_subtract): Likewise.
	* config/vax/vax.c (vax_output_int_add): Likewise for param
	"insn".
	(vax_output_int_subtract): Likewise.
	* emit-rtl.c (set_insn_deleted): Likewise, removing cast.
	(emit_pattern_after): Likewise for param "after".
	(emit_insn_after): Likewise.
	(emit_jump_insn_after): Likewise.
	(emit_call_insn_after): Likewise.
	(emit_debug_insn_after): Likewise.
	(emit_pattern_before): Likewise for param "before".
	(emit_insn_before): Likewise.
	(emit_jump_insn_before): Likewise.
	* final.c (get_insn_template): Likewise for param "insn", removing
	a cast.
	* output.h (get_insn_template): Likewise for 2nd param.
	* rtl.h (emit_insn_before): Likewise.
	(emit_jump_insn_before): Likewise.
	(emit_debug_insn_before_noloc): Likewise.
	(emit_insn_after): Likewise.
	(emit_jump_insn_after): Likewise.
	(emit_call_insn_after): Likewise.
	(emit_debug_insn_after): Likewise.
	(set_insn_deleted): Likewise for param.

2018-06-18  Michael Meissner  <meissner@linux.ibm.com>

	PR target/85358
	* config/rs6000/rs6000-modes.def (toplevel): Rework the 128-bit
	floating point modes, so that IFmode is numerically greater than
	TFmode, which is greater than KFmode using FRACTIONAL_FLOAT_MODE
	to declare the ordering.  This prevents IFmode from being
	converted to TFmode when long double is IEEE 128-bit on an ISA 3.0
	machine.  Include rs6000-modes.h to share the fractional values
	between genmodes* and the rest of the compiler.
	(IFmode): Likewise.
	(KFmode): Likewise.
	(TFmode): Likewise.
	* config/rs6000/rs6000-modes.h: New file.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Change the
	meaning of rs6000_long_double_size so that 126..128 selects an
	appropriate 128-bit floating point type.
	(rs6000_option_override_internal): Likewise.
	* config/rs6000/rs6000.h (toplevel): Include rs6000-modes.h.
	(TARGET_LONG_DOUBLE_128): Change the meaning of
	rs6000_long_double_size so that 126..128 selects an appropriate
	128-bit floating point type.
	(LONG_DOUBLE_TYPE_SIZE): Update comment.
	* config/rs6000/rs6000.md (trunciftf2): Correct the modes of the
	source and destination to match the standard usage.
	(truncifkf2): Likewise.
	(copysign<mode>3, IEEE iterator): Rework copysign of float128 on
	ISA 2.07 to use an explicit clobber, instead of passing in a
	temporary.
	(copysign<mode>3_soft): Likewise.

2018-06-18  David Malcolm  <dmalcolm@redhat.com>

	* tree-vect-data-refs.c (vect_analyze_data_ref_dependences):
	Replace dump_printf_loc call with DUMP_VECT_SCOPE.
	(vect_slp_analyze_instance_dependence): Likewise.
	(vect_enhance_data_refs_alignment): Likewise.
	(vect_analyze_data_refs_alignment): Likewise.
	(vect_slp_analyze_and_verify_instance_alignment
	(vect_analyze_data_ref_accesses): Likewise.
	(vect_prune_runtime_alias_test_list): Likewise.
	(vect_analyze_data_refs): Likewise.
	* tree-vect-loop-manip.c (vect_update_inits_of_drs): Likewise.
	* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
	(vect_analyze_scalar_cycles_1): Likewise.
	(vect_get_loop_niters): Likewise.
	(vect_analyze_loop_form_1): Likewise.
	(vect_update_vf_for_slp): Likewise.
	(vect_analyze_loop_operations): Likewise.
	(vect_analyze_loop): Likewise.
	(vectorizable_induction): Likewise.
	(vect_transform_loop): Likewise.
	* tree-vect-patterns.c (vect_pattern_recog): Likewise.
	* tree-vect-slp.c (vect_analyze_slp): Likewise.
	(vect_make_slp_decision): Likewise.
	(vect_detect_hybrid_slp): Likewise.
	(vect_slp_analyze_operations): Likewise.
	(vect_slp_bb): Likewise.
	* tree-vect-stmts.c (vect_mark_stmts_to_be_vectorized): Likewise.
	(vectorizable_bswap): Likewise.
	(vectorizable_call): Likewise.
	(vectorizable_simd_clone_call): Likewise.
	(vectorizable_conversion): Likewise.
	(vectorizable_assignment): Likewise.
	(vectorizable_shift): Likewise.
	(vectorizable_operation): Likewise.
	* tree-vectorizer.h (DUMP_VECT_SCOPE): New macro.

2018-06-18  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/81384
	* builtin-types.def (BT_FN_SIZE_CONST_STRING_SIZE): New.
	* builtins.c (expand_builtin_strnlen): New function.
	(expand_builtin): Call it.
	(fold_builtin_n): Avoid setting TREE_NO_WARNING.
	* builtins.def (BUILT_IN_STRNLEN): New.
	* calls.c (maybe_warn_nonstring_arg): Handle BUILT_IN_STRNLEN.
	Warn for bounds in excess of maximum object size.
	* tree-ssa-strlen.c (maybe_set_strlen_range): Return tree representing
	single-value ranges.  Handle strnlen.
	(handle_builtin_strlen): Handle strnlen.
	(strlen_check_and_optimize_stmt): Same.
	* doc/extend.texi (Other Builtins): Document strnlen.

2018-06-18  Maya Rashish  <coypu@sdf.org>

	* config/alpha/openbsd.h (TARGET_DEFAULT): Define.
	(LINK_SPEC, STARTFILE_SPEC, ENDFILE_SPEC): Likewise.
	(INTMAX_TYPE, UINTMAX_TYPE, WINT_TYPE): Likewise.

	* config/alpha/elf.h (STARTFILE_SPEC, ENDFILE_SPEC): Move from
	here to ...
	* config/alpha/linux.h (STARTFILE_SPEC, ENDFILE_SPEC): Here.

2018-06-18  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* tree.c (escaped_string::escape): Replace cast to char * by
	const_cast<char *> (unescaped).

2018-06-18  Nick Clifton  <nickc@redhat.com>

	PR 84195
	* tree.c (escaped_string): New class.  Converts an unescaped
	string into its escaped equivalent.
	(warn_deprecated_use): Use the new class to convert the
	deprecation message, if present.
	(test_escaped_strings): New self test.
	(test_c_tests): Add test_escaped_strings.
	* doc/extend.texi (deprecated): Add a note that the
	deprecation message is affected by the -fmessage-length
	option, and that control characters will be escaped.
	(#pragma GCC error): Document this pragma.
	(#pragma GCC warning): Likewise.
	* doc/invoke.texi (-fmessage-length): Document this option's
	effect on the #warning and #error preprocessor directives and
	the deprecated attribute.

2018-06-18  Eric Botcazou  <ebotcazou@adacore.com>

	* tree.c (decl_value_expr_lookup): Revert latest change.
	(decl_value_expr_insert): Likewise.

2018-06-17  Eric Botcazou  <ebotcazou@adacore.com>

	* gimplify.c (nonlocal_vlas): Delete.
	(nonlocal_vla_vars): Likewise.
	(gimplify_var_or_parm_decl): Do not add debug VAR_DECLs for non-local
	referenced VLAs.
	(gimplify_body): Do not create and destroy nonlocal_vlas.
	* tree-nested.c: Include diagnostic.h.
	(use_pointer_in_frame): Tweak.
	(lookup_field_for_decl): Add assertion and declare the transformation.
	(convert_nonlocal_reference_op) <PARM_DECL>: Rework and issue an
	internal error when the reference is in a wrong context.  Do not
	create a debug decl by default.
	(note_nonlocal_block_vlas): Delete.
	(convert_nonlocal_reference_stmt) <GIMPLE_BIND>: Do not call it.
	(convert_local_reference_op) <PARM_DECL>: Skip the frame decl.  Do not
	create a debug decl by default.
	(convert_gimple_call) <GIMPLE_CALL>: Issue an internal error when the
	call is in a wrong context.
	(fixup_vla_decls): New function.
	(finalize_nesting_tree_1): Adjust comment.  Call fixup_vla_decls if no
	debug variables were created.
	* tree.c (decl_value_expr_lookup): Add checking assertion.
	(decl_value_expr_insert): Likewise.

2018-06-16  Kugan Vivekanandarajah  <kuganv@linaro.org>

	PR middle-end/82479
	* ipa-fnsummary.c (will_be_nonconstant_expr_predicate): Handle CALL_EXPR.
	* tree-scalar-evolution.c (interpret_expr): Likewise.
	(expression_expensive_p): Likewise.
	* tree-ssa-loop-ivopts.c (contains_abnormal_ssa_name_p): Likewise.
	* tree-ssa-loop-niter.c (number_of_iterations_popcount): New.
	(number_of_iterations_exit_assumptions): Use number_of_iterations_popcount.
	(ssa_defined_by_minus_one_stmt_p): New.

2018-06-16  Kugan Vivekanandarajah  <kuganv@linaro.org>

	PR middle-end/64946
	* cfgexpand.c (expand_debug_expr): Hande ABSU_EXPR.
	* config/i386/i386.c (ix86_add_stmt_cost): Likewise.
	* dojump.c (do_jump): Likewise.
	* expr.c (expand_expr_real_2): Check operand type's sign.
	* fold-const.c (const_unop): Handle ABSU_EXPR.
	(fold_abs_const): Likewise.
	* gimple-pretty-print.c (dump_unary_rhs): Likewise.
	* gimple-ssa-backprop.c (backprop::process_assign_use): Likesie.
	(strip_sign_op_1): Likesise.
	* match.pd: Add new pattern to generate ABSU_EXPR.
	* optabs-tree.c (optab_for_tree_code): Handle ABSU_EXPR.
	* tree-cfg.c (verify_gimple_assign_unary): Likewise.
	* tree-eh.c (operation_could_trap_helper_p): Likewise.
	* tree-inline.c (estimate_operator_cost): Likewise.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	* tree-vect-patterns.c (vect_recog_sad_pattern): Likewise.
	* tree.def (ABSU_EXPR): New.

2018-06-16  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/86095
	* common.opt (Wunsafe-loop-optimizations): Add Ignore, remove Var,
	documented as preserved for backward compatibility only.
	* doc/invoke.texi: Remove -Wunsafe-loop-optimizations documentation.

	PR rtl-optimization/86108
	* bb-reorder.c (create_forwarder_block): Renamed to ...
	(create_eh_forwarder_block): ... this.  Split OLD_BB after labels and
	jump from new landing pad to the second part.
	(sjlj_fix_up_crossing_landing_pad, dw2_fix_up_crossing_landing_pad):
	Adjust callers.

2018-06-15  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/85878
	* expr.c (expand_assignment): Remove now redundant COMPLEX_MODE_P
	check from first store_expr, use to_mode instead of GET_MODE (to_rtx).
	Only call store_expr for halves if the mode is the same.

	PR middle-end/86123
	* match.pd ((X / Y) == 0 -> X < Y): Don't transform complex divisions.
	Fix up comment formatting.

2018-06-15  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* typed-splay-tree.h (typed_splay_tree::remove): New function.
	(typed_splay_tree::closure,
	typed_splay_tree::inner_foreach_fn, typed_splay_tree::m_inner): Deleted.
	(typed_splay_tree::typed_splay_tree,
	typed_splay_tree::operator =): Declared private.
	(typed_splay_tree::splay_tree_key, typed_splay_tree::splay_tree_value,
	typed_splay_tree::splay_tree_node_s, typed_splay_tree::KDEL,
	typed_splay_tree::VDEL, typed_splay_tree::splay_tree_delete_helper,
	typed_splay_tree::rotate_left, typed_splay_tree::rotate_right,
	typed_splay_tree::splay_tree_splay,
	typed_splay_tree::splay_tree_foreach_helper,
	typed_splay_tree::splay_tree_insert,
	typed_splay_tree::splay_tree_remove,
	typed_splay_tree::splay_tree_lookup,
	typed_splay_tree::splay_tree_predecessor,
	typed_splay_tree::splay_tree_successor,
	typed_splay_tree::splay_tree_min,
	typed_splay_tree::splay_tree_max): Took over from splay-tree.c/.h.
	(typed_splay_tree::root, typed_splay_tree::comp,
	typed_splay_tree::delete_key,
	typed_splay_tree::delete_value): New data members.
	* typed-splay-tree.c (selftest::test_str_to_int): Add a test for
	typed_splay_tree::remove.

2018-06-15  Matthew Fortune  <matthew.fortune@mips.com>

	* config/mips/mips.h (ASM_SPEC): Pass through -mcrc, -mno-crc,
	-mginv and -mno-ginv to the assembler.
	* config/mips/mips.opt (-mcrc): New option.
	(-mginv): Likewise.
	* doc/invoke.text (-mcrc): Document.
	(-mginv): Likewise.

2018-06-15  Nick Clifton  <nickc@redhat.com>

	PR 84195
	* tree.c (escaped_string): New class.  Converts an unescaped
	string into its escaped equivalent.
	(warn_deprecated_use): Use the new class to convert the
	deprecation message, if present.
	(test_escaped_strings): New self test.
	(test_c_tests): Add test_escaped_strings.
	* doc/extend.texi (deprecated): Add a note that the
	deprecation message is affected by the -fmessage-length
	option, and that control characters will be escaped.
	(#pragma GCC error): Document this pragma.
	(#pragma GCC warning): Likewise.
	* doc/invoke.texi (-fmessage-length): Document this option's
	effect on the #warning and #error preprocessor directives and
	the deprecated attribute.

2018-06-15  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_slp_bb): Dump MSG_OPTIMIZED_LOCATIONS
	here, also noting vector size used.
	* tree-vectorizer.c (vectorize_loops): Adjust.  Note vector
	size used in MSG_OPTIMIZED_LOCATIONS dump.
	(pass_slp_vectorize::execute): Adjust.

2018-06-15  Claudiu Zissulescu  <claziss@synopsys.com>

	PR target/85968
	* config/arc/arc.c (arc_return_address_register): Fix
	if-condition.

2018-06-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/86159
	* tree-cfg.c (gimplify_build3): Do not strip sign conversions,
	leave useless conversion stripping to force_gimple_operand_gsi.
	(gimplify_build2): Likewise.
	(gimplify_build1): Likewise.

2018-06-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/86076
	* tree-cfg.c (move_stmt_op): unshare invariant addresses
	before adjusting their block.

2018-06-15  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config.gcc (riscv*-*-elf* | riscv*-*-rtems*): Use custom
	multilibs for *-*-rtems*.
	* config/riscv/t-rtems: New file.

2018-06-14  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/86122
	* match.pd ((A +- CST1) +- CST2): Punt if last resort
	unsigned_type_for returns NULL.

	PR target/85945
	* lower-subreg.c (find_decomposable_subregs): Don't decompose float
	subregs of multi-word pseudos unless the float mode has word size.

2018-06-14  Richard Biener  <rguenther@suse.de>

	PR middle-end/86139
	* tree-vect-generic.c (build_word_mode_vector_type): Remove
	duplicate and harmful type_hash_canon.
	* tree.c (type_hash_canon): Assert we didn't find ourselves.

2018-06-14  Richard Biener  <rguenther@suse.de>

	PR ipa/86124
	* tree-ssa-struct-alias.c (create_variable_info_for): Handle
	NULL cgraph_node.

2018-06-14  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config/rtems.h (STDINT_LONG32): Define.

2018-06-13  Matthew Fortune  <matthew.fortune@mips.com>
	    Prachi Godbole  <prachi.godbole@imgtec.com>

	* config/mips/mips-cpus.def: Define P6600.
	* config/mips/mips-tables.opt: Regenerate.
	* config/mips/mips.c (mips_ucbranch_type): New enum.
	(mips_rtx_cost_data): Add support for P6600.
	(mips_issue_rate): Likewise.
	(mips_multipass_dfa_lookahead): Likewise.
	(mips_avoid_hazard): Likewise.
	(mips_reorg_process_insns): Likewise.
	(mips_classify_branch_p6600): New function.
	* config/mips/mips.h (TUNE_P6600): New define.
	(MIPS_ISA_LEVEL_SPEC): Infer mips64r6 from p6600.
	(ENABLE_LD_ST_PAIRS): Enable load/store bonding for p6600.
	* config/mips/mips.md: Include p6600.md.
	(processor): Add p6600.
	* config/mips/p6600.md: New file.
	* doc/invoke.texi: Add p6600 to supported architectures.

2018-06-13  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/86114
	* gimple-fold.c (gimple_fold_builtin_strlen): Only handle LHS
	of integer types.
	* tree-ssa-strlen.c (maybe_set_strlen_range): Same.

2018-06-13  Richard Biener  <rguenther@suse.de>

	* tree-vect-patterns.c (vect_recog_vector_vector_shift_pattern):
	Properly set vector type of the intermediate stmt.
	* tree-vect-stmts.c (vectorizable_operation): The destination
	var always has vectype_out type.

2018-06-13  Jeff Law  <law@redhat.com>

	* config/rl78/rl78.c (move_elim_pass): Use TDF_NONE rather than
	integer 0 for argument to print_rtl_with_bb.
	(rl78_reorg): Likewise.

2018-06-13  David Malcolm  <dmalcolm@redhat.com>

	* config/arc/arc.c (hwloop_optimize): Strengthen local "end_label"
	from rtx to rtx_insn *.
	* config/bfin/bfin.c (hwloop_optimize): Likewise for local
	"label".
	(add_sched_insns_for_speculation): Likewise for local "target",
	converting usage of JUMP_LABEL to JUMP_LABEL_AS_INSN.
	* config/c6x/c6x.c (reorg_split_calls): Strengthen param "call_labels"
	from rtx_insn ** to rtx_code_label **.
	(reorg_emit_nops): Likewise.
	(c6x_reorg): Likewise for local "call_labels".
	* config/sh/sh-protos.h (get_dest_uid): Strengthen 1st param from
	rtx to rtx_insn *.
	* config/sh/sh.c (dump_table): Strengthen local "lab" from rtx to
	rtx_code_label *, adding safe_as_a <rtx_code_label *> casts to
	the loops over LABEL_REFS.
	(fixup_addr_diff_vecs): Add as_a <rtx_insn *> to usage of
	braf_label.
	(barrier_align): Convert usage of JUMP_LABEL to JUMP_LABEL_AS_INSN.
	(get_dest_uid): Strengthen param "label" from rtx to rtx_insn *.
	(split_branches): Strengthen local "olabel" from rtx to
	rtx_insn *, adding a safe_as_a cast.
	* emit-rtl.c (next_real_insn): Strengthen param from "rtx"
	to "rtx_insn *".
	(add_insn_after): Likewise for first two params.
	(add_insn_before): Likewise.
	(remove_insn): Likewise for param.
	(emit_pattern_before_noloc): Likewise for second and third params.
	(emit_jump_insn_before_noloc): Convert NULL_RTX to NULL.
	(emit_call_insn_before_noloc): Likewise.
	(emit_debug_insn_before_noloc): Strengthen "before" param from "rtx"
	to "rtx_insn *".
	(emit_barrier_before): Likewise.
	(emit_label_before): Strengthen "label" param from "rtx" to
	"rtx_code_label *".  Strengthen "before" param from "rtx" to
	"rtx_insn *".
	(emit_insn_after_1): Strengthen "after" param from "rtx" to
	"rtx_insn *".
	(emit_pattern_after_noloc): Likewise.
	(emit_insn_after_noloc): Likewise.
	(emit_jump_insn_after_noloc): Likewise.
	(emit_call_insn_after_noloc): Likewise.
	(emit_debug_insn_after_noloc): Likewise.
	(emit_barrier_after): Likewise.
	(emit_label_after): Likewise for both params.
	(emit_pattern_after_setloc): Likewise for "after" param.  Convert
	"loc" param from "int" to "location_t".
	(emit_insn_after_setloc): Likewise.
	(emit_jump_insn_after_setloc): Likewise.
	(emit_call_insn_after_setloc): Likewise.
	(emit_debug_insn_after_setloc): Likewise.
	(emit_pattern_before_setloc): Likewise for "before" param.  Convert
	"loc" param from "int" to "location_t".
	(emit_pattern_before): Convert NULL_RTX to NULL.
	(emit_insn_before_setloc): Convert "loc" param from "int" to
	"location_t".
	(emit_jump_insn_before_setloc): Likewise.
	(emit_call_insn_before_setloc): Likewise.
	(emit_debug_insn_before_setloc): Strengthen "before" param from rtx to
	rtx_insn *.  Convert "loc" param from "int" to "location_t".
	* rtl.h (emit_insn_before_setloc, emit_jump_insn_before_setloc,
	emit_call_insn_before_setloc, emit_debug_insn_before_setloc):
	Convert 3rd param from "int" to "location_t".
	(emit_barrier_before, emit_barrier_after, next_real_insn):
	Strengthen param from rtx to rtx_insn *.
	(emit_label_before): Strengthen 1st param from "rtx" to
	"rtx_code_label *".  Strengthen 2nd param from "rtx" to
	"rtx_insn *".
	(emit_insn_after_noloc, emit_jump_insn_after_noloc,
	emit_call_insn_after_noloc, emit_debug_insn_after_noloc):
	Strengthen 2nd param from "rtx" to "rtx_insn *".
	(emit_insn_after_setloc, emit_jump_insn_after_setloc)
	emit_call_insn_after_setloc, emit_debug_insn_after_setloc):
	Likewise. Convert 3rd param from "int" to "location_t".
	(emit_label_after): Strengthen 1st param from "rtx" to
	"rtx_code_label *".
	(next_real_insn, remove_insn): Strengthen param from "rtx" to
	"rtx_insn *".
	(add_insn_before, add_insn_after): Strengthen 1st and 2nd params
	from "rtx" to "rtx_insn *".

2018-06-13  Jan Hubicka  <hubicka@gcc.gnu.org>

	* cgraph.c (cgraph_node::get_untransformed_body): Dump function
	bodies streamed in with -Q.
	* dumpfile.c (dump_files): Add lto-stream-out dump file.
	* dumpfile.h (tree_dump_index): Add lto_stream_out.
	* gimple-streamer-out.c: Include gimple-pretty-print.h
	(output_bb): Dump stmts streamed.
	* lto-section-out.c: Include print-tree.h
	(lto_begin_section): Dump sections created.
	(lto_output_decl_index): Dump decl encoded.
	* lto-streamer-out.c: Include print-tree.h
	(create_output_block): Dump output block created.
	(DFS::DFS_write_tree_body): Dump DFS SCCs streamed.
	(output_function): Dump function output.
	(output_constructor): Dump constructor streamed.
	(write_global_stream): Output indexes encoded.
	(produce_asm_for_decls): Dump streams encoded.
	* lto-streamer.c (streamer_dump_file): New global var.
	* lto-streamer.h (streamer_dump_file): Declare.
	* passes.c (ipa_write_summaries): Initialize streamer dump.
	* varpool.c (varpool_node::get_constructor): Dump constructors streamed
	in.

2018-06-13  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/86048
	* config/i386/winnt.c (i386_pe_seh_cold_init): Do not emit negative
	offsets for register save directives.  Emit a second batch of save
	directives, if need be, when the function accesses prior frames.

2018-06-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/fpu.md (fmasf4): Force operand to register.
	(fnmasf4): Likewise.

2018-06-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_pad_return): Remove.
	* config/arc/arc.c (machine_function): Remove force_short_suffix
	and size_reason.
	(arc_print_operand): Adjust printing of '&'.
	(arc_verify_short): Remove conditional printing of short suffix.
	(arc_final_prescan_insn): Remove reference to size_reason.
	(pad_return): New function.
	(arc_reorg): Call pad_return.
	(arc_pad_return): Remove.
	(arc_init_machine_status): Remove reference to force_short_suffix.
	* config/arc/arc.md (vunspec): Add VUNSPEC_ARC_BLOCKAGE.
	(attr length): When attribute iscompact is true force to 2
	regardless; in the case of maybe check if we want to force the
	instruction to have 4 bytes length.
	(nopv): Change it to generate 4 byte long nop as well.
	(blockage): New pattern.
	(simple_return): Remove call to arc_pad_return.
	(p_return_i): Likewise.

2018-06-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/elf.h (LINK_GCC_C_SEQUENCE_SPEC): Define.

2018-06-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/builtins.def (SYNC): SYNC instruction is valid on all
	ARC cores.

2018-06-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (atomic_exchangesi): EX instruction is default
	for ARC700 and ARCv2.

2018-06-13  Chenghua Xu <paul.hua.gm@gmail.com>

	PR target/86076
	* config/mips/loongson.md (vec_setv4hi): Gen_lowpart for
	operands[2] instead of operands[1].


2018-06-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* lra-constraints.c (simplify_operand_subreg): In the paradoxical
	case, check whether the outer register overlaps an unallocatable
	register, not just whether it fits the required class.

2018-06-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* poly-int.h (can_div_trunc_p): Add new overload in which all values
	are poly_ints.
	* alias.c (get_addr): Extend CONST_INT handling to poly_int_rtx_p.
	(memrefs_conflict_p): Likewise.
	(init_alias_analysis): Likewise.
	* cfgexpand.c (expand_debug_expr): Likewise.
	* combine.c (combine_simplify_rtx, force_int_to_mode): Likewise.
	* cse.c (fold_rtx): Likewise.
	* explow.c (adjust_stack, anti_adjust_stack): Likewise.
	* expr.c (emit_block_move_hints): Likewise.
	(clear_storage_hints, push_block, emit_push_insn): Likewise.
	(store_expr_with_bounds, reduce_to_bit_field_precision): Likewise.
	(emit_group_load_1): Use rtx_to_poly_int64 for group offsets.
	(emit_group_store): Likewise.
	(find_args_size_adjust): Use strip_offset.  Use rtx_to_poly_int64
	to read the PRE/POST_MODIFY increment.
	* calls.c (store_one_arg): Use strip_offset.
	* rtlanal.c (rtx_addr_can_trap_p_1): Extend CONST_INT handling to
	poly_int_rtx_p.
	(set_noop_p): Use rtx_to_poly_int64 for the elements selected
	by a VEC_SELECT.
	* simplify-rtx.c (avoid_constant_pool_reference): Use strip_offset.
	(simplify_binary_operation_1): Extend CONST_INT handling to
	poly_int_rtx_p.
	* var-tracking.c (compute_cfa_pointer): Take a poly_int64 rather
	than a HOST_WIDE_INT.
	(hard_frame_pointer_adjustment): Change from HOST_WIDE_INT to
	poly_int64.
	(adjust_mems, add_stores): Update accodingly.
	(vt_canonicalize_addr): Track polynomial offsets.
	(emit_note_insn_var_location): Likewise.
	(vt_add_function_parameter): Likewise.
	(vt_initialize): Likewise.

2018-06-12  Jeff Law  <law@redhat.com>

	* config.gcc (alpha*-*-freebsd*): Remove.
	* config/alpha/freebsd.h: Remove.

2018-06-12  David Malcolm  <dmalcolm@redhat.com>

	PR other/69968
	* spellcheck-tree.c (levenshtein_distance): Rename to...
	(get_edit_distance): ...this, and update for underlying renaming.
	* spellcheck-tree.h (levenshtein_distance): Rename to...
	(get_edit_distance): ...this.
	* spellcheck.c (levenshtein_distance): Rename to...
	(get_edit_distance): ...this.  Convert from Levenshtein distance
	to Damerau-Levenshtein distance by supporting transpositions of
	adjacent characters.  Rename "v1" to "v_next" and "v0" to
	"v_one_ago".
	(selftest::levenshtein_distance_unit_test_oneway): Rename to...
	(selftest::test_edit_distance_unit_test_oneway): ...this, and
	update for underlying renaming.
	(selftest::levenshtein_distance_unit_test): Rename to...
	(selftest::test_get_edit_distance_unit): ...this, and update for
	underlying renaming.
	(selftest::test_find_closest_string): Add example from PR 69968
	where transposition helps
	(selftest::test_metric_conditions): Update for renaming.
	(selftest::test_metric_conditions): Likewise.
	(selftest::spellcheck_c_tests): Likewise.
	* spellcheck.h (levenshtein_distance): Rename both overloads to...
	(get_edit_distance): ...this.
	(best_match::consider): Update for renaming.

2018-06-12  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/85259
	* builtins.c (compute_objsize): Handle constant offsets.
	* gimple-ssa-warn-restrict.c (maybe_diag_offset_bounds): Return
	true iff a warning has been issued.
	* gimple.h (gimple_nonartificial_location): New function.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Call
	gimple_nonartificial_location and handle -Wno-system-headers.
	(handle_builtin_stxncpy): Same.

2018-06-12  Martin Sebor  <msebor@redhat.com>

	PR c/85931
	* fold-const.c (operand_equal_p): Handle SAVE_EXPR.

2018-06-12  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add
	BUILTIN_VEC_XST entries for pointer to double and long long.

2018-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85990
	* config/i386/gnu-user.h (TARGET_THREAD_SPLIT_STACK_OFFSET):
	Update comments.
	* config/i386/gnu-user64.h (TARGET_THREAD_SPLIT_STACK_OFFSET):
	Likewise.

2018-06-12  Martin Liska  <mliska@suse.cz>

	* doc/options.texi: Document IntegerRange.

2018-06-12  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.opt: Make MPX-related options as Deprecated.
	* opt-functions.awk: Handle Deprecated flag.
	* opts-common.c (decode_cmdline_option): Handle cl_deprecated
	and report error.
	(read_cmdline_option): Report warning for a deprecated option.
	* opts.h (struct cl_option): Add new field cl_deprecated.
	(CL_ERR_DEPRECATED): New.

2018-06-12  Martin Liska  <mliska@suse.cz>

	* doc/options.texi: Document Deprecated option flag.

2018-06-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-arch.h (arc_extras): New enum.
	(arc_cpu_t):Add field extra.
	(arc_cpu_types): Consider the extras.
	* config/arc/arc-cpus.def: Add extras info.
	* config/arc/arc-opts.h (processor_type): Consider extra field.
	* config/arc/arc.c (arc_override_options): Handle extra field.

2018-06-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-arch.h: Update ARC_OPTX macro.
	* config/arc/arc-options.def (ARC_OPTX): Introduce a new doc
	field.
	* config/arc/arc.c (arc_init): Update pic warning.
	(irq_range): Update irq range parsing warnings.
	(arc_override_options): Update various warning messages.
	(arc_handle_aux_attribute): Likewise.

2018-06-12  Robert Suchanek  <robert.suchanek@mips.com>

	* config/mips/i6400.md (i6400_fpu_fadd): Remove frint.

2018-06-12  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* doc/sourcebuild.texi: Document usage of line number 0 in verify
	compiler messages directives.

2018-06-12  Matthew Fortune  <mfortune@gmail.com>

	* config/mips/mips-cpus.def: New MIPS_CPU for i6500.
	* config/mips/mips-tables.opt: Regenerate.
	* config/mips/mips.h (MIPS_ISA_LEVEL_SPEC): Mark i6500 as
	mips64r6.
	* doc/invoke.texi: Document -march=i6500.

2018-06-12  Prachi Godbole  <prachi.godbole@imgtec.com>

	* config/mips/i6400.md (i6400_gpmuldiv): Remove cpu_unit.
	(i6400_gpmul): Add cpu_unit.
	(i6400_gpdiv): Likewise.
	(i6400_msa_add_d): Update reservations.
	(i6400_msa_int_add) Likewise.
	(i6400_msa_short_logic3) Likewise.
	(i6400_msa_short_logic2) Likewise.
	(i6400_msa_short_logic) Likewise.
	(i6400_msa_move) Likewise.
	(i6400_msa_cmp) Likewise.
	(i6400_msa_short_float2) Likewise.
	(i6400_msa_div_d) Likewise.
	(i6400_msa_long_logic1) Likewise.
	(i6400_msa_long_logic2) Likewise.
	(i6400_msa_mult) Likewise.
	(i6400_msa_long_float2) Likewise.
	(i6400_msa_long_float4) Likewise.
	(i6400_msa_long_float5) Likewise.
	(i6400_msa_long_float8) Likewise.
	(i6400_fpu_fadd): Include frint type.
	(i6400_fpu_store): New define_insn_reservation.
	(i6400_fpu_load): Likewise.
	(i6400_fpu_move): Likewise.
	(i6400_fpu_fcmp): Likewise.
	(i6400_fpu_fmadd): Likewise.
	(i6400_int_mult): Include imul3nc type and update reservation.
	(i6400_int_div): Include idiv3 type and update reservation.
	(i6400_int_load): Update to check type not move_type.
	(i6400_int_store): Likewise.
	(i6400_int_prefetch): Set zero latency.

2018-06-12  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc.c: Document new %@{...} sequence.
	(LINK_COMMAND_SPEC): Use it for the -L switches.
	(cpp_unique_options): Use it for the -I switches.
	(at_file_argbuf): New global variable.
	(in_at_file): Likewise.
	(alloc_args): Create at_file_argbuf.
	(clear_args): Truncate at_file_argbuf.
	(store_arg): If in_at_file, push the argument onto at_file_argbuf.
	(open_at_file): New function.
	(close_at_file): Likewise.
	(create_at_file): Delete.
	(do_spec_1) <'i'>: Use open_at_file/close_at_file.
	<'o'>: Likewise.
	<'@'>: New case.
	(validate_switches_from_spec): Deal with %@{...} sequence.
	(validate_switches): Likewise.
	(driver::finalize): Call clear_args.

2018-06-11  Rasmus Villemoes  <rasmus.villemoes@prevas.dk>

	* config/vx-common.h (USE_TM_CLONE_REGISTRY): #define to 0.

2018-06-11  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wall): List -Wc++17-compat.
	(Wno-class-memaccess): Add @opindex.
	(Wno-templates, Wno-multiple-inheritance): Same.
	(Wno-virtual-inheritance, Wno-namespaces): Same.
	(Wno-pedantic, Wno-chkp, Wcoverage-mismatch): Same.
	(Wno-format-overflow, Wno-format-truncation): Same.
	(Wno-unused-local-typedefs, Walloc-size-larger-than): Same.
	(Wno-alloc-size-larger-than, Wframe-larger-than): Same
	(Wno-stack-usage, Wno-c++-compat, Wno-c++11-compat): Same.
	(Wno-c++14-compat, Wno-c++17-compat, Wno-openmp-simd): Same.
	(Wno-unsuffixed-float-constants, Wno-addr-space-convert): Same.
	(Wno-misspelled-isr): Same.

2018-06-11  Martin Sebor  <msebor@redhat.com>

	* PR tree-optimization/86083
	* tree-ssa-strlen.c (handle_char_store): Use tree_expr_nonzero_p.

2018-06-11  Zhouyi Zhou <zhouzhouyi@gmail.com>

	* tree-eh.c (lower_eh_constructs_2): Add a comma to comment.

2018-06-11  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/85755
	* config/rs6000/rs6000.md (*movdi_internal32): Put constraint modifiers
	on the correct operand.
	(*movdi_internal64): Ditto.

2018-06-11  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/86089
	* tree-ssa-strlen.c (get_string_length): Move back removed hunk.

2018-06-11  Julia Koval  <julia.koval@intel.com>

	* config/i386/vaesintrin.h (_mm_aesdec_epi128, _mm_aesdeclast_epi128)
	_mm_aesenc_epi128, _mm_aesenclast_epi128: Remove.
	* config/i386/vpclmulqdqintrin.h (_mm_clmulepi64_epi128): Remove.

2018-06-11  Olivier Hainque  <hainque@adacore.com>

	* dwarf2out.c (gen_compile_unit_die): Fallout to DW_LANG_Ada83
	for Ada with strict dwarf2.

2018-06-08  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/85755
	* config/rs6000/rs6000.c (mem_operand_gpr): Enable PRE_INC and PRE_DEC
	addresses.

2018-06-08  Jan Hubicka  <hubicka@ucw.cz>

	* dumpfile.c (FIRST_ME_AUTO_NUMBERED_DUMP): Bump to 4.

2018-06-08  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/rs6000.c (rs6000_passes_ieee128): Protect with #if
	TARGET_ELF.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* tree-cfg.h (debug_function): Fix argument type to match
	implementation.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* config/powerpcspe/powerpcspe.c (rs6000_xcoff_visibility):
	Remove usage of MPX-related (and removed) fields.
	* config/rs6000/rs6000.c (rs6000_xcoff_visibility): Likewise.

2018-06-08  David Malcolm  <dmalcolm@redhat.com>

	* cfg.c (debug): Use TDF_NONE rather than 0.
	* cfghooks.c (debug): Likewise.
	* dumpfile.c (DUMP_FILE_INFO): Likewise; also for OPTGROUP.
	(struct dump_option_value_info): Convert to...
	(struct kv_pair): ...this template type.
	(dump_options): Convert to kv_pair<dump_flags_t>; use TDF_NONE
	rather than 0.
	(optinfo_verbosity_options): Likewise.
	(optgroup_options): Convert to kv_pair<optgroup_flags_t>; use
	OPTGROUP_NONE.
	(gcc::dump_manager::dump_register): Use optgroup_flags_t rather
	than int for "optgroup_flags" param.
	(dump_generic_expr_loc): Use dump_flags_t rather than int for
	"dump_kind" param.
	(dump_dec): Likewise.
	(dump_finish): Use TDF_NONE rather than 0.
	(gcc::dump_manager::opt_info_enable_passes): Use optgroup_flags_t
	rather than int for "optgroup_flags" param.  Use TDF_NONE rather
	than 0.  Update for change to option_ptr.
	(opt_info_switch_p_1): Convert "optgroup_flags" param from int *
	to optgroup_flags_t *.  Use TDF_NONE and OPTGROUP_NONE rather than
	0.  Update for changes to optinfo_verbosity_options and
	optgroup_options.
	(opt_info_switch_p): Convert optgroup_flags from int to
	optgroup_flags_t.
	(dump_basic_block): Use dump_flags_t rather than int
	for "dump_kind" param.
	* dumpfile.h (TDF_ADDRESS, TDF_SLIM, TDF_RAW, TDF_DETAILS,
	TDF_STATS, TDF_BLOCKS, TDF_VOPS, TDF_LINENO, TDF_UID)
	TDF_STMTADDR, TDF_GRAPH, TDF_MEMSYMS, TDF_RHS_ONLY, TDF_ASMNAME,
	TDF_EH, TDF_NOUID, TDF_ALIAS, TDF_ENUMERATE_LOCALS, TDF_CSELIB,
	TDF_SCEV, TDF_GIMPLE, TDF_FOLDING, MSG_OPTIMIZED_LOCATIONS,
	MSG_MISSED_OPTIMIZATION, MSG_NOTE, MSG_ALL, TDF_COMPARE_DEBUG,
	TDF_NONE): Convert from macros to...
	(enum dump_flag): ...this new enum.
	(dump_flags_t): Update to use enum.
	(operator|, operator&, operator~, operator|=, operator&=):
	Implement for dump_flags_t.
	(OPTGROUP_NONE, OPTGROUP_IPA, OPTGROUP_LOOP, OPTGROUP_INLINE,
	OPTGROUP_OMP, OPTGROUP_VEC, OPTGROUP_OTHER, OPTGROUP_ALL):
	Convert from macros to...
	(enum optgroup_flag): ...this new enum.
	(optgroup_flags_t): New typedef.
	(operator|, operator|=): Implement for optgroup_flags_t.
	(struct dump_file_info): Convert field "alt_flags" to
	dump_flags_t.  Convert field "optgroup_flags" to
	optgroup_flags_t.
	(dump_basic_block): Use dump_flags_t rather than int for param.
	(dump_generic_expr_loc): Likewise.
	(dump_dec): Likewise.
	(dump_register): Convert param "optgroup_flags" to
	optgroup_flags_t.
	(opt_info_enable_passes): Likewise.
	* early-remat.c (early_remat::dump_edge_list): Use TDF_NONE rather
	than 0.
	* gimple-pretty-print.c (debug): Likewise.
	* gimple-ssa-store-merging.c (bswap_replace): Likewise.
	(merged_store_group::apply_stores): Likewise.
	* gimple-ssa-strength-reduction.c (insert_initializers): Likewise.
	* gimple.c (verify_gimple_pp): Likewise.
	* graphite-poly.c (print_pbb_body): Likewise.
	* passes.c (pass_manager::register_one_dump_file): Convert
	local "optgroup_flags" to optgroup_flags_t.
	* print-tree.c (print_node): Use TDF_NONE rather than 0.
	(debug): Likewise.
	(debug_body): Likewise.
	* tree-pass.h (struct pass_data): Convert field "optgroup_flags"
	to optgroup_flags_t.
	* tree-pretty-print.c (print_struct_decl): Use TDF_NONE rather
	than 0.
	* tree-ssa-math-opts.c (convert_mult_to_fma_1): Likewise.
	(convert_mult_to_fma): Likewise.
	* tree-ssa-reassoc.c (undistribute_ops_list): Likewise.
	* tree-ssa-sccvn.c (vn_eliminate): Likewise.
	* tree-vect-data-refs.c (dump_lower_bound): Convert param
	"dump_kind" to dump_flags_t.

2018-06-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (min, max): Delete.

2018-06-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/invoke.texi (RS/6000 and PowerPC Options): Delete mention of
	-mabi=spe and -mabi=no-spe.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* ipa-pure-const.c (propagate_pure_const): Use ::get at places
	where we expect an existing summary.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* ipa-inline-analysis.c (simple_edge_hints): Use ::get method.
	* ipa-inline.h (estimate_edge_growth): Likewise.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* cgraph.c (function_version_hasher::hash): Use
	cgraph_node::get_uid ().
	(function_version_hasher::equal):
	* cgraph.h (cgraph_node::get_uid): New method.
	* ipa-inline.c (update_caller_keys): Use
	cgraph_node::get_uid ().
	(update_callee_keys): Likewise.
	* ipa-utils.c (searchc): Likewise.
	(ipa_reduced_postorder): Likewise.
	* lto-cgraph.c (input_node): Likewise.
	* passes.c (is_pass_explicitly_enabled_or_disabled): Likewise.
	* symbol-summary.h (symtab_insertion): Likewise.
	(symtab_removal): Likewise.
	(symtab_duplication): Likewise.
	* tree-pretty-print.c (dump_function_header): Likewise.
	* tree-sra.c (convert_callers_for_node): Likewise.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* cgraph.c (symbol_table::create_edge): Always assign a new
	unique number.
	(symbol_table::free_edge): Do not recycle numbers.
	* cgraph.h (cgraph_edge::get): New method.
	* symbol-summary.h (symtab_removal): Use it.
	(symtab_duplication): Likewise.
	(call_summary::hashable_uid): Remove.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* ipa-inline-analysis.c (inline_edge_removal_hook): Remove.
	(initialize_growth_caches): Remove.
	(free_growth_caches): Likewise.
	(do_estimate_edge_time): Use edge_growth_cache.
	(do_estimate_edge_size): Likewise.
	(do_estimate_edge_hints): Likewise.
	* ipa-inline.c (reset_edge_caches): Likewise.
	(recursive_inlining): Likewise.
	(inline_small_functions): Likewise.
	* ipa-inline.h (initialize_growth_caches): Remove.
	(estimate_edge_size): Likewise.
	(estimate_edge_time): Likewise.
	(estimate_edge_hints): Likewise.
	(reset_edge_growth_cache): Likewise.
	* symbol-summary.h (call_summary::remove): New method.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* ipa-cp.c (class edge_clone_summary): New summary.
	(grow_edge_clone_vectors): Remove.
	(ipcp_edge_duplication_hook): Remove.
	(class edge_clone_summary_t): New call_summary class.
	(ipcp_edge_removal_hook): Remove.
	(edge_clone_summary_t::duplicate): New function.
	(get_next_cgraph_edge_clone): Use edge_clone_summaries.
	(create_specialized_node): Likewise.
	(ipcp_driver): Initialize edge_clone_summaries and do not
	register hooks.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (get): New function.
	(call_summary::m_initialize_when_cloning): New class member.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::remove): Do not recycle uid.
	* cgraph.h (symbol_table::release_symbol): Do not pass uid.
	(symbol_table::allocate_cgraph_symbol): Do not set uid.
	* passes.c (uid_hash_t): Record removed_nodes by their uids.
	(remove_cgraph_node_from_order): Use the removed_nodes set.
	(do_per_function_toporder): Likwise.
	* symbol-summary.h (symtab_insertion): Use cgraph_node::uid
	instead of summary_uid.
	(symtab_removal): Likewise.
	(symtab_duplication): Likewise.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* ipa-cp.c (ipcp_store_bits_results): Use
	ipcp_transformation_sum.
	(ipcp_store_vr_results): Likewise.
	* ipa-prop.c (ipcp_grow_transformations_if_necessary): Renamed
	to ...
	(ipcp_transformation_initialize): ... this.
	(ipa_set_node_agg_value_chain):
	(ipa_node_params_t::duplicate): Use ipcp_transformation_sum.
	(write_ipcp_transformation_info): Likewise.
	(read_ipcp_transformation_info): Likewise.
	(ipcp_update_bits): Likewise.
	(ipcp_update_vr): Likewise.
	(ipcp_transform_function): Likewise.
	* ipa-prop.h: Rename ipcp_transformation_summary to
	ipcp_transformation.
	(class ipcp_transformation_t): New function summary.
	(ipcp_get_transformation_summary): Use ipcp_transformation_sum.
	(ipa_get_agg_replacements_for_node): Likewise.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* ipa-pure-const.c (struct funct_state_d): Do it class instead
	of struct.
	(class funct_state_summary_t): New function_summary class.
	(has_function_state): Remove.
	(get_function_state): Likewise.
	(set_function_state): Likewise.
	(add_new_function): Likewise.
	(funct_state_summary_t::insert): New function.
	(duplicate_node_data): Remove.
	(remove_node_data): Remove.
	(funct_state_summary_t::duplicate): New function.
	(register_hooks): Create new funct_state_summaries.
	(pure_const_generate_summary): Use it.
	(pure_const_write_summary): Likewise.
	(pure_const_read_summary): Likewise.
	(propagate_pure_const): Likewise.
	(propagate_nothrow): Likewise.
	(dump_malloc_lattice): Likewise.
	(propagate_malloc): Likewise.
	(execute): Do not register hooks, just remove summary
	instead.
	(pass_ipa_pure_const::pass_ipa_pure_const): Simplify
	constructor.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* ipa-reference.c (remove_node_data): Remove.
	(duplicate_node_data): Likewise.
	(class ipa_ref_var_info_summary_t): New class.
	(class ipa_ref_opt_summary_t): Likewise.
	(get_reference_vars_info): Use ipa_ref_var_info_summaries.
	(get_reference_optimization_summary): Use
	ipa_ref_opt_sum_summaries.
	(set_reference_vars_info): Remove.
	(set_reference_optimization_summary): Likewise.
	(ipa_init): Create summaries.
	(init_function_info): Use function summary.
	(ipa_ref_opt_summary_t::duplicate): New function.
	(ipa_ref_opt_summary_t::remove): New function.
	(get_read_write_all_from_node): Fix GNU coding style.
	(propagate): Use function summary.
	(write_node_summary_p): Fix GNU coding style.
	(stream_out_bitmap): Likewise.
	(ipa_reference_read_optimization_summary): Use function summary.
	(ipa_reference_c_finalize): Do not release hooks.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* ipa-fnsummary.c (dump_ipa_call_summary): Use ::get method.
	(analyze_function_body): Extract multiple calls of get_create.
	* ipa-inline-analysis.c (simple_edge_hints): Likewise.
	* ipa-inline.c (recursive_inlining): Use ::get method.
	* ipa-inline.h (estimate_edge_growth): Likewise.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* hsa-common.h (enum hsa_function_kind): Rename HSA_NONE to
	HSA_INVALID.
	(hsa_function_summary::hsa_function_summary): Use the new enum
	value.
	(hsa_gpu_implementation_p): Use hsa_summaries::get.
	* hsa-gen.c (hsa_get_host_function): Likewise.
	(get_brig_function_name): Likewise.
	* ipa-hsa.c (process_hsa_functions): Likewise.
	(ipa_hsa_write_summary): Likewise.
	* symbol-summary.h (symtab_duplication): Use ::get function/
	(get): New function.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (ix86_can_inline_p): Use get_create instead
	of get.
	* hsa-common.c (hsa_summary_t::link_functions): Likewise.
	(hsa_register_kernel): Likewise.
	* hsa-common.h (hsa_gpu_implementation_p): Likewise.
	* hsa-gen.c (hsa_get_host_function): Likewise.
	(get_brig_function_name): Likewise.
	(generate_hsa): Likewise.
	(pass_gen_hsail::execute): Likewise.
	* ipa-cp.c (ipcp_cloning_candidate_p): Likewise.
	(devirtualization_time_bonus): Likewise.
	(ipcp_propagate_stage): Likewise.
	* ipa-fnsummary.c (redirect_to_unreachable): Likewise.
	(edge_set_predicate): Likewise.
	(evaluate_conditions_for_known_args): Likewise.
	(evaluate_properties_for_edge): Likewise.
	(ipa_fn_summary::reset): Likewise.
	(ipa_fn_summary_t::duplicate): Likewise.
	(dump_ipa_call_summary): Likewise.
	(ipa_dump_fn_summary): Likewise.
	(analyze_function_body): Likewise.
	(compute_fn_summary): Likewise.
	(estimate_edge_devirt_benefit): Likewise.
	(estimate_edge_size_and_time): Likewise.
	(estimate_calls_size_and_time): Likewise.
	(estimate_node_size_and_time): Likewise.
	(inline_update_callee_summaries): Likewise.
	(remap_edge_change_prob): Likewise.
	(remap_edge_summaries): Likewise.
	(ipa_merge_fn_summary_after_inlining): Likewise.
	(ipa_update_overall_fn_summary): Likewise.
	(read_ipa_call_summary): Likewise.
	(inline_read_section): Likewise.
	(write_ipa_call_summary): Likewise.
	(ipa_fn_summary_write): Likewise.
	(ipa_free_fn_summary): Likewise.
	* ipa-hsa.c (process_hsa_functions): Likewise.
	(ipa_hsa_write_summary): Likewise.
	(ipa_hsa_read_section): Likewise.
	* ipa-icf.c (sem_function::merge): Likewise.
	* ipa-inline-analysis.c (simple_edge_hints): Likewise.
	(do_estimate_edge_time): Likewise.
	(estimate_size_after_inlining): Likewise.
	(estimate_growth): Likewise.
	(growth_likely_positive): Likewise.
	* ipa-inline-transform.c (clone_inlined_nodes): Likewise.
	(inline_call): Likewise.
	* ipa-inline.c (caller_growth_limits): Likewise.
	(can_inline_edge_p): Likewise.
	(can_inline_edge_by_limits_p): Likewise.
	(compute_uninlined_call_time): Likewise.
	(compute_inlined_call_time): Likewise.
	(want_inline_small_function_p): Likewise.
	(edge_badness): Likewise.
	(update_caller_keys): Likewise.
	(update_callee_keys): Likewise.
	(recursive_inlining): Likewise.
	(inline_small_functions): Likewise.
	(inline_to_all_callers_1): Likewise.
	(dump_overall_stats): Likewise.
	(early_inline_small_functions): Likewise.
	(early_inliner): Likewise.
	* ipa-inline.h (estimate_edge_growth): Likewise.
	* ipa-profile.c (ipa_propagate_frequency_1): Likewise.
	* ipa-prop.c (ipa_make_edge_direct_to_target): Likewise.
	* ipa-prop.h (IPA_NODE_REF): Likewise.
	(IPA_EDGE_REF): Likewise.
	* ipa-pure-const.c (malloc_candidate_p): Likewise.
	(propagate_malloc): Likewise.
	* ipa-split.c (execute_split_functions): Likewise.
	* symbol-summary.h: Rename get to get_create.
	(get): Likewise.
	(get_create): Likewise.
	* tree-sra.c (ipa_sra_preliminary_function_checks): Likewise.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (release): Move definition out of class
	declaration.
	(symtab_removal): Likewise.
	(symtab_duplication): Likewise.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (function_summary): Move constructor
	implementation out of class declaration.
	(release): Likewise.
	(symtab_insertion): Likewise.
	(symtab_removal): Likewise.
	(symtab_duplication): Likewise.
	(get): Likewise.

2018-06-08  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Remove support for MPX (macros, related functions,
	fields in cgraph_node, ...).
	* builtin-types.def (BT_BND): Likewise.
	(BT_FN_BND_CONST_PTR): Likewise.
	(BT_FN_CONST_PTR_BND): Likewise.
	(BT_FN_VOID_PTR_BND): Likewise.
	(BT_FN_BND_CONST_PTR_SIZE): Likewise.
	(BT_FN_VOID_CONST_PTR_BND_CONST_PTR): Likewise.
	* builtins.c (expand_builtin_memcpy_with_bounds): Likewise.
	(expand_builtin_mempcpy_with_bounds): Likewise.
	(expand_builtin_memset_with_bounds): Likewise.
	(expand_builtin_memset_args): Likewise.
	(std_expand_builtin_va_start): Likewise.
	(expand_builtin): Likewise.
	(expand_builtin_with_bounds): Likewise.
	* builtins.def (DEF_BUILTIN_CHKP): Likewise.
	(DEF_LIB_BUILTIN_CHKP): Likewise.
	(DEF_EXT_LIB_BUILTIN_CHKP): Likewise.
	(DEF_CHKP_BUILTIN): Likewise.
	(BUILT_IN_MEMCPY): Likewise.
	(BUILT_IN_MEMMOVE): Likewise.
	(BUILT_IN_MEMPCPY): Likewise.
	(BUILT_IN_MEMSET): Likewise.
	(BUILT_IN_STPCPY): Likewise.
	(BUILT_IN_STRCAT): Likewise.
	(BUILT_IN_STRCHR): Likewise.
	(BUILT_IN_STRCPY): Likewise.
	(BUILT_IN_STRLEN): Likewise.
	(BUILT_IN_MEMCPY_CHK): Likewise.
	(BUILT_IN_MEMMOVE_CHK): Likewise.
	(BUILT_IN_MEMPCPY_CHK): Likewise.
	(BUILT_IN_MEMSET_CHK): Likewise.
	(BUILT_IN_STPCPY_CHK): Likewise.
	(BUILT_IN_STRCAT_CHK): Likewise.
	(BUILT_IN_STRCPY_CHK): Likewise.
	* calls.c (store_bounds): Likewise.
	(emit_call_1): Likewise.
	(special_function_p): Likewise.
	(maybe_warn_nonstring_arg): Likewise.
	(initialize_argument_information): Likewise.
	(finalize_must_preallocate): Likewise.
	(compute_argument_addresses): Likewise.
	(expand_call): Likewise.
	* cfgexpand.c (expand_call_stmt): Likewise.
	(expand_return): Likewise.
	(expand_gimple_stmt_1): Likewise.
	(pass_expand::execute): Likewise.
	* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Likewise.
	(cgraph_node::remove): Likewise.
	(cgraph_node::dump): Likewise.
	(cgraph_node::verify_node): Likewise.
	* cgraph.h (chkp_function_instrumented_p): Likewise.
	(symtab_node::get_alias_target): Likewise.
	(cgraph_node::can_remove_if_no_direct_calls_and_refs_p): Likewise.
	(cgraph_local_p): Likewise.
	* cgraphbuild.c (cgraph_edge::rebuild_edges): Likewise.
	(cgraph_edge::rebuild_references): Likewise.
	* cgraphunit.c (varpool_node::finalize_decl): Likewise.
	(walk_polymorphic_call_targets): Likewise.
	(cgraph_node::expand_thunk): Likewise.
	(symbol_table::output_weakrefs): Likewise.
	* common/config/i386/i386-common.c (OPTION_MASK_ISA2_GENERAL_REGS_ONLY_UNSET): Likewise.
	(ix86_handle_option): Likewise.
	* config/i386/constraints.md: Likewise.
	* config/i386/i386-builtin-types.def (BND): Likewise.
	(VOID): Likewise.
	(PVOID): Likewise.
	(ULONG): Likewise.
	* config/i386/i386-builtin.def (BDESC_END): Likewise.
	(BDESC_FIRST): Likewise.
	(BDESC): Likewise.
	* config/i386/i386-c.c (ix86_target_macros_internal): Likewise.
	* config/i386/i386-protos.h (ix86_bnd_prefixed_insn_p): Likewise.
	* config/i386/i386.c (enum reg_class): Likewise.
	(ix86_target_string): Likewise.
	(ix86_option_override_internal): Likewise.
	(ix86_conditional_register_usage): Likewise.
	(ix86_valid_target_attribute_inner_p): Likewise.
	(ix86_set_indirect_branch_type): Likewise.
	(ix86_set_current_function): Likewise.
	(ix86_function_arg_regno_p): Likewise.
	(init_cumulative_args): Likewise.
	(ix86_function_arg_advance): Likewise.
	(ix86_function_arg): Likewise.
	(ix86_pass_by_reference): Likewise.
	(ix86_function_value_regno_p): Likewise.
	(ix86_function_value_1): Likewise.
	(ix86_function_value_bounds): Likewise.
	(ix86_return_in_memory): Likewise.
	(ix86_setup_incoming_vararg_bounds): Likewise.
	(ix86_va_start): Likewise.
	(indirect_thunk_need_prefix): Likewise.
	(print_reg): Likewise.
	(ix86_print_operand): Likewise.
	(ix86_expand_call): Likewise.
	(ix86_output_function_return): Likewise.
	(reg_encoded_number): Likewise.
	(BDESC_VERIFYS): Likewise.
	(ix86_init_mpx_builtins): Likewise.
	(ix86_init_builtins): Likewise.
	(ix86_emit_cmove): Likewise.
	(ix86_emit_move_max): Likewise.
	(ix86_expand_builtin): Likewise.
	(ix86_builtin_mpx_function): Likewise.
	(ix86_get_arg_address_for_bt): Likewise.
	(ix86_load_bounds): Likewise.
	(ix86_store_bounds): Likewise.
	(ix86_load_returned_bounds): Likewise.
	(ix86_store_returned_bounds): Likewise.
	(ix86_class_likely_spilled_p): Likewise.
	(ix86_hard_regno_mode_ok): Likewise.
	(x86_order_regs_for_local_alloc): Likewise.
	(ix86_mitigate_rop): Likewise.
	(ix86_bnd_prefixed_insn_p): Likewise.
	(ix86_mpx_bound_mode): Likewise.
	(ix86_make_bounds_constant): Likewise.
	(ix86_initialize_bounds): Likewise.
	(TARGET_LOAD_BOUNDS_FOR_ARG): Likewise.
	(TARGET_STORE_BOUNDS_FOR_ARG): Likewise.
	(TARGET_LOAD_RETURNED_BOUNDS): Likewise.
	(TARGET_STORE_RETURNED_BOUNDS): Likewise.
	(TARGET_CHKP_BOUND_MODE): Likewise.
	(TARGET_BUILTIN_CHKP_FUNCTION): Likewise.
	(TARGET_CHKP_FUNCTION_VALUE_BOUNDS): Likewise.
	(TARGET_CHKP_MAKE_BOUNDS_CONSTANT): Likewise.
	(TARGET_CHKP_INITIALIZE_BOUNDS): Likewise.
	* config/i386/i386.h (TARGET_MPX): Likewise.
	(TARGET_MPX_P): Likewise.
	(VALID_BND_REG_MODE): Likewise.
	(FIRST_BND_REG): Likewise.
	(LAST_BND_REG): Likewise.
	(enum reg_class): Likewise.
	(BND_REG_P): Likewise.
	(BND_REGNO_P): Likewise.
	(BNDmode): Likewise.
	(ADJUST_INSN_LENGTH): Likewise.
	* config/i386/i386.md: Likewise.
	* config/i386/i386.opt: Likewise.
	* config/i386/linux-common.h (LIBMPX_LIBS): Likewise.
	(defined): Likewise.
	(LINK_MPX): Likewise.
	(MPX_SPEC): Likewise.
	(LIBMPX_SPEC): Likewise.
	(LIBMPXWRAPPERS_SPEC): Likewise.
	(CHKP_SPEC): Likewise.
	* config/i386/predicates.md: Likewise.
	* dbxout.c (dbxout_type): Likewise.
	* doc/extend.texi: Likewise.
	* doc/invoke.texi: Likewise.
	* doc/md.texi: Likewise.
	* doc/tm.texi: Likewise.
	* doc/tm.texi.in: Likewise.
	* dwarf2out.c (is_base_type): Likewise.
	(gen_formal_types_die): Likewise.
	(gen_subprogram_die): Likewise.
	(gen_type_die_with_usage): Likewise.
	(gen_decl_die): Likewise.
	(dwarf2out_late_global_decl): Likewise.
	* expr.c (expand_assignment): Likewise.
	(emit_storent_insn): Likewise.
	(store_expr_with_bounds): Likewise.
	(store_expr): Likewise.
	(expand_expr_real_1): Likewise.
	* expr.h (store_expr_with_bounds): Likewise.
	* function.c (use_register_for_decl): Likewise.
	(struct bounds_parm_data): Likewise.
	(assign_parms_augmented_arg_list): Likewise.
	(assign_parm_find_entry_rtl): Likewise.
	(assign_parm_is_stack_parm): Likewise.
	(assign_parm_load_bounds): Likewise.
	(assign_bounds): Likewise.
	(assign_parms): Likewise.
	(expand_function_start): Likewise.
	* gcc.c (CHKP_SPEC): Likewise.
	* gimple-fold.c (gimple_fold_builtin_memory_op): Likewise.
	* gimple-ssa-warn-restrict.c (builtin_access::builtin_access): Likewise.
	(wrestrict_dom_walker::check_call): Likewise.
	* gimple.c (gimple_build_call_from_tree): Likewise.
	* gimple.h (enum gf_mask): Likewise.
	(gimple_call_with_bounds_p): Likewise.
	(gimple_call_set_with_bounds): Likewise.
	* gimplify.c (gimplify_init_constructor): Likewise.
	* ipa-cp.c (initialize_node_lattices): Likewise.
	(propagate_constants_across_call): Likewise.
	(find_more_scalar_values_for_callers_subset): Likewise.
	* ipa-hsa.c (process_hsa_functions): Likewise.
	* ipa-icf-gimple.c (func_checker::compare_gimple_call): Likewise.
	* ipa-icf.c (sem_function::merge): Likewise.
	* ipa-inline.c (early_inliner): Likewise.
	* ipa-pure-const.c (warn_function_noreturn): Likewise.
	(warn_function_cold): Likewise.
	(propagate_pure_const): Likewise.
	* ipa-ref.h (enum GTY): Likewise.
	* ipa-split.c (find_retbnd): Likewise.
	(consider_split): Likewise.
	(split_function): Likewise.
	* ipa-visibility.c (cgraph_externally_visible_p): Likewise.
	* ipa.c (walk_polymorphic_call_targets): Likewise.
	(symbol_table::remove_unreachable_nodes): Likewise.
	(process_references): Likewise.
	(cgraph_build_static_cdtor_1): Likewise.
	* lto-cgraph.c (lto_output_node): Likewise.
	(output_refs): Likewise.
	(compute_ltrans_boundary): Likewise.
	(input_overwrite_node): Likewise.
	(input_node): Likewise.
	(input_cgraph_1): Likewise.
	* params.def (PARAM_CHKP_MAX_CTOR_SIZE): Likewise.
	* passes.c (pass_manager::execute_early_local_passes): Likewise.
	(class pass_chkp_instrumentation_passes): Likewise.
	(make_pass_chkp_instrumentation_passes): Likewise.
	* passes.def: Likewise.
	* rtl.h (struct GTY): Likewise.
	(CALL_EXPR_WITH_BOUNDS_P): Likewise.
	* stor-layout.c (layout_type): Likewise.
	* symtab.c: Likewise.
	* target.def: Likewise.
	* targhooks.c (default_chkp_bound_type): Likewise.
	(default_chkp_bound_mode): Likewise.
	(default_builtin_chkp_function): Likewise.
	(default_chkp_function_value_bounds): Likewise.
	(default_chkp_make_bounds_constant): Likewise.
	(default_chkp_initialize_bounds): Likewise.
	* targhooks.h (default_chkp_bound_type): Likewise.
	(default_chkp_bound_mode): Likewise.
	(default_builtin_chkp_function): Likewise.
	(default_chkp_function_value_bounds): Likewise.
	(default_chkp_make_bounds_constant): Likewise.
	(default_chkp_initialize_bounds): Likewise.
	* toplev.c (compile_file): Likewise.
	(process_options): Likewise.
	* tree-core.h (DEF_BUILTIN): Likewise.
	(DEF_BUILTIN_CHKP): Likewise.
	* tree-inline.c (declare_return_variable): Likewise.
	(remap_gimple_stmt): Likewise.
	(copy_bb): Likewise.
	(initialize_inlined_parameters): Likewise.
	(expand_call_inline): Likewise.
	* tree-pass.h (make_pass_ipa_chkp_versioning): Likewise.
	(make_pass_ipa_chkp_early_produce_thunks): Likewise.
	(make_pass_ipa_chkp_produce_thunks): Likewise.
	(make_pass_chkp): Likewise.
	(make_pass_chkp_opt): Likewise.
	(make_pass_chkp_instrumentation_passes): Likewise.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	* tree-ssa-ccp.c (insert_clobber_before_stack_restore): Likewise.
	* tree-ssa-dce.c (propagate_necessity): Likewise.
	(eliminate_unnecessary_stmts): Likewise.
	* tree-ssa-pre.c (create_expression_by_pieces): Likewise.
	* tree-ssa-sccvn.c (copy_reference_ops_from_call): Likewise.
	* tree-ssa-sccvn.h: Likewise.
	* tree-ssa-strlen.c (get_string_length): Likewise.
	(valid_builtin_call): Likewise.
	(adjust_last_stmt): Likewise.
	(handle_builtin_strchr): Likewise.
	(handle_builtin_strcpy): Likewise.
	(handle_builtin_stxncpy): Likewise.
	(handle_builtin_memcpy): Likewise.
	(handle_builtin_strcat): Likewise.
	(strlen_check_and_optimize_stmt): Likewise.
	* tree-stdarg.c (expand_ifn_va_arg_1): Likewise.
	* tree-streamer-in.c: Likewise.
	* tree-streamer.c (record_common_node): Likewise.
	* tree.c (tree_code_size): Likewise.
	(wide_int_to_tree_1): Likewise.
	(type_contains_placeholder_1): Likewise.
	(build_common_tree_nodes): Likewise.
	* tree.def (POINTER_BOUNDS_TYPE): Likewise.
	* tree.h (POINTER_BOUNDS_TYPE_P): Likewise.
	(POINTER_BOUNDS_P): Likewise.
	(BOUNDED_TYPE_P): Likewise.
	(BOUNDED_P): Likewise.
	(CALL_WITH_BOUNDS_P): Likewise.
	(pointer_bounds_type_node): Likewise.
	* value-prof.c (gimple_ic): Likewise.
	* var-tracking.c (vt_add_function_parameters): Likewise.
	* varasm.c (make_decl_rtl): Likewise.
	(assemble_start_function): Likewise.
	(output_constant): Likewise.
	(maybe_assemble_visibility): Likewise.
	* varpool.c (ctor_for_folding): Likewise.
	* chkp-builtins.def: Remove.
	* ipa-chkp.c: Remove.
	* ipa-chkp.h: Remove.
	* rtl-chkp.c: Remove.
	* rtl-chkp.h: Remove.
	* tree-chkp-opt.c: Remove.
	* tree-chkp.c: Remove.
	* tree-chkp.h: Remove.

2018-06-07  Carl Love  <cel@us.ibm.com>

	* config/rs6000/vsx.md (vextract_fp_from_shorth,
	vextract_fp_from_shortl): Add BE support.

2018-06-07  Paul Koning  <ni1d@arrl.net>

	* compare-elim.c (try_merge_compare): Don't merge compare if
	address contains a side effect.
	(try_eliminate_compare): Likewise.

2018-06-07  Olga Makhotina  <olga.makhotina@intel.com>

	* config.gcc: Support "tremont".
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect "tremont".
	* config/i386/i386-c.c (ix86_target_macros_internal): Handle
	PROCESSOR_TREMONT.
	* config/i386/i386.c (m_TREMONT): Define.
	(processor_target_table): Add "tremont".
	(PTA_TREMONT): Define.
	(ix86_lea_outperforms): Add TARGET_TREMONT.
	(get_builtin_code_for_version): Handle PROCESSOR_TREMONT.
	(fold_builtin_cpu): Add M_INTEL_TREMONT, replace M_INTEL_GOLDMONT
	and M_INTEL_GOLDMONT_PLUS.
	(fold_builtin_cpu): Add "tremont".
	(ix86_add_stmt_cost): Add TARGET_TREMONT.
	(ix86_option_override_internal): Add "tremont".
	* config/i386/i386.h (processor_costs): Define TARGET_TREMONT.
	(processor_type): Add PROCESSOR_TREMONT.
	* config/i386/x86-tune.def: Add m_TREMONT.
	* doc/invoke.texi: Add tremont as x86 -march=/-mtune= CPU type.

2018-06-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_mcu_name): Set the "i" in the
	symbol defined for msp430i* devices to be lower case.

2018-06-07  Richard Biener  <rguenther@suse.de>

	* graphite-sese-to-poly.c (extract_affine): Avoid unneded
	wrapping.  Properly wrap the result of a BIT_NOT_EXPR.
	Properly wrap signed arithmetic if overflow wraps.

2018-06-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/69615
	* tree-ssa-reassoc.c (optimize_range_tests_var_bound): If rhs2 is lhs
	of a cast from a same precision integral SSA_NAME in a bb dominated
	by first_bb, retry with rhs2 set to the rhs1 of the cast.  Don't emit
	cast to utype if rhs2 has already a compatible type.

2018-06-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85935
	* graphite-scop-detection.c (find_params_in_bb): Analyze
	condition operands with respect to the correct loop.  Assert
	the analysis doesn't fail.

2018-06-04  Carl Love  <cel@us.ibm.com>

	* config/rs6000/vsx.md (first_match_index_<mode>): Calculate index
	using natural element order.  Use gen_lshrsi3 instead of gen_ashrsi3
	as it is slightly cheaper.
	(first_match_or_eos_index_<mode>):
	Calculate index using natural element order.
	(first_match_index_<mode>):
	Calculate index using natural element order.
	(first_match_or_eos_index_<mode>):
	Calculate index using natural order.
	(define_insn vclzlsbb): Change to define_insn vclzlsbb_<mode>.
	for BE and LE modes.
	* config/rs6000/rs6000-c.c: Rename P9V_BUILTIN_VCLZLSBB,
	P9V_BUILTIN_VCLZLSBB_V16QI.
	* config/rs6000/rs6000-builtin.def: Make VCLZLSBB mode
	specific.

2018-06-06  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* doc/extend.texi (PowerPC AltiVec Built-in Functions): Adjust
	indentation and line wrap for many prototypes.  Add missing
	@smallexample directives around block of prototypes for vec_xl and
	vec_xst.

2018-06-05  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_passes_ieee128): New boolean to
	track if we pass or return IEEE 128-bit floating point.
	(ieee128_mangling_gcc_8_1): New boolean to say whether to generate
	C++ mangling that is compatible with GCC 8.1.
	(TARGET_ASM_GLOBALIZE_DECL_NAME): Override target hook.
	(init_cumulative_args): Note if we pass or return IEEE 128-bit
	floating point types.
	(rs6000_function_arg_advance_1): Likewise.
	(rs6000_mangle_type): Optionally generate mangled names that match
	what GCC 8.1 generated for IEEE 128-bit floating point types.
	(rs6000_globalize_decl_name): If we have an external function that
	passes or returns IEEE 128-bit types, generate a weak reference
	from the mangled name used in GCC 8.1 to the current mangled
	name.
	(rs6000_init_builtins): Make __ibm128 use the long double type if
	long double is IBM extended double.  Make __float128 use the long
	double type if long double is IEEE 128-bit.

	PR target/85657
	* config/rs6000/rs6000-builtin.def (BU_IBM128_2): New helper
	macro for __ibm128 built-in functions.
	(PACK_IF): Add __ibm128 pack/unpack functions.
	(UNPACK_IF): Likewise.
	* config/rs6000/rs6000.c (rs6000_builtin_mask_calculate): Do not
	enable long double built-in functions if long double is IEEE
	128-bit floating point.
	(rs6000_invalid_builtin): Update long double built-in function
	error message.
	(rs6000_expand_builtin): For PACK_IF and UNPACK_IF built-in
	functions, adjust the built-in function to use the long double
	built-in function if __ibm128 and long double are the same type.
	* doc/extend.texi (PowerPC builtins): Update documention for
	__builtin_{,un}pack_longdouble.  Add documentation for
	__builtin_{,un}pack_ibm128.

2018-06-06  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (enum riscv_privilege_levels): New.
	(struct machine_function): New field interrupt_mode.
	(riscv_handle_type_attribute): New function.  Add forward declaration.
	(riscv_attribute_table) <interrupt>: Use riscv_handle_type_attribute.
	(riscv_expand_epilogue): Check interrupt_mode field.
	(riscv_set_current_function): Check interrupt attribute args and
	set interrupt_mode field.
	* config/riscv/riscv.md (UNSPECV_SRET, UNSPECV_URET): New.
	(riscv_sret, riscv_uret): New.
	* doc/extend.texi (RISC-V Function Attributes) <interrupt>: Document
	new arguments to interrupt attribute.

2018-06-06  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/63177
	* /config/rs6000/rs6000.h (ASM_CPU_SPEC): Add support for -mpower9.
	Don't handle -mcpu=power8 if -mpower9-vector is also used.

2018-06-06  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-builtin.def (VSX_BUILTIN_VEC_LD,
	VSX_BUILTIN_VEC_ST): Add comment to explain non-traditional uses.
	* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Remove
	several redundant entries.

2018-06-06  David Malcolm  <dmalcolm@redhat.com>

	* config/i386/i386-protos.h (ix86_expand_call): Strengthen return
	type from "rtx" to "rtx_insn *".
	* config/i386/i386.c (ix86_expand_split_stack_prologue): Likewise
	for local "call_insn", removing cast.
	(ix86_expand_call): Likewise, introducing a "call_insn" local.

2018-06-06  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/86066
	* gimple-ssa-store-merging.c (process_store): Do not bypass BIT_NOT_EXPR
	for BIT_INSERT_EXPR stores.

2018-06-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86062
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Handle arbitrary
	component refs ontop
	of to be offsetted base.

2018-06-06  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_attr): Allow interrupt handlers
	to be static and remove check on interrupt attribute name.

2018-06-05  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* doc/extend.texi (PowerPC AltiVec Built-in Functions): Remove
	volatile qualifier from vec_lvsl and vec_lvsr argument prototypes.

2018-06-05  Steve Ellcey  <sellcey@cavium.com>

	PR target/79924
	* config/aarch64/aarch64-protos.h (aarch64_err_no_fpadvsimd): Remove
	second argument.
	* config/aarch64/aarch64-protos..c (aarch64_err_no_fpadvsimd):
	Remove second argument, change how error is called.
	(aarch64_layout_arg): Remove second argument from
	aarch64_err_no_fpadvsimd call.
	(aarch64_init_cumulative_args): Ditto.
	(aarch64_gimplify_va_arg_expr): Ditto.
	* config/aarch64/aarch64.md (mov<mode>): Ditto.

2018-06-05  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (simple_return_indirect_internal): New expander.
	(*simple_return_indirect_internal<mode>): Rename from
	simple_return_indirect_internal.  Use W mode iterator.
	(rstorssp): New expander.
	(*rstorssp<mode>): Rename from rstorssp.  Use P mode iterator.
	(clrssbsy): New expander.
	(*clrssbsy<mode>): Rename from clrssbsy.  Use P mode iterator.

2018-06-05  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm_cmse.h (cmse_nsfptr_create): Change typeof to
	__typeof__.
	(cmse_check_pointed_object): Likewise.

2018-06-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/47618
	* doc/invoke.texi: Document how -fprofile-dir format
	is extended.

2018-06-05  Richard Biener  <rguenther@suse.de>

	* tree-cfgcleanup.c (cleanup_control_flow_pre): For edge
	removal pretend DOM info isn't available so we do not update
	it and only remove edges, not dominated blocks.  Actually free
	DOM info in case we removed something.  Remove unreachable blocks.
	(mfb_keep_latches): Work with either DOM info or marked backedges.
	(cleanup_tree_cfg_noloop): Do not remove unreachable blocks
	first.  Mark backedges if DOM info isn't available.
	(Re-)compute DOM info after cleanup_control_flow_pre.

2018-06-05  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (struct locus_discrim_map): Store line, not location.
	(locus_discrim_hasher::hash): Adjust.
	(locus_discrim_hasher::equal): Likewise.
	(next_discriminator_for_locus): Work on line directly.
	(same_line_p): Pass in expanded locus1 as well.
	(assign_discriminators): Avoid redundant location expansions.

2018-06-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86046
	* tree-ssa.c (maybe_optimize_var): Clear DECL_GIMPLE_REG_P
	if required after clearing TREE_ADDRESSABLE.

2018-06-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86047
	* tree-ssa-loop.c (for_each_index): Glob handling of all
	decls and constants and really handle all of them.

2018-06-05  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/81497
	* config/arm/arm-builtins.c (arm_type_qualifiers): Add
	qualifier_void_pointer and qualifier_const_void_pointer.
	(arm_ldc_qualifiers, arm_stc_qualifiers): Use the above.
	(arm_init_builtins): Handle the above.
	* config/arm/arm_acle.h (__arm_cdp, __arm_ldc, __arm_ldcl, __arm_stc,
	__arm_stcl, __arm_mcr, __arm_cdp2, __arm_ldc2, __arm_ldcl2, __arm_stc2,
	__arm_stcl2,__arm_mcr2, __arm_mcrr, __arm_mcrr2): Remove return for
	void intrinsics.

2018-06-05  Martin Liska  <mliska@suse.cz>

	* auto-profile.c (read_autofdo_file): Do not use
	gcov_ctr_summary struct.
	(afdo_callsite_hot_enough_for_early_inline): Likewise.
	* coverage.c (struct counts_entry): Likewise.
	(read_counts_file): Read just single summary entry.
	(get_coverage_counts): Use gcov_summary struct.
	* coverage.h (get_coverage_counts): Likewise.
	* gcov-dump.c (dump_working_sets): Likewise.
	(tag_summary): Dump just single summary.
	* gcov-io.c (gcov_write_summary): Write just histogram
	summary.
	(gcov_read_summary): Read just single summary.
	(compute_working_sets): Use gcov_summary struct.
	* gcov-io.h (GCOV_TAG_SUMMARY_LENGTH): Remove usage
	of GCOV_COUNTERS_SUMMABLE.
	(GCOV_COUNTERS_SUMMABLE): Remove.
	(GCOV_FIRST_VALUE_COUNTER): Replace with
	GCOV_COUNTER_V_INTERVAL.
	(struct gcov_ctr_summary): Remove.
	(struct gcov_summary): Directly use fields of former
	gcov_ctr_summary.
	(compute_working_sets): Use gcov_summary struct.
	* gcov.c (read_count_file): Do not use ctrs fields.
	* lto-cgraph.c (merge_profile_summaries): Use gcov_summary
	struct.
	* lto-streamer.h (struct GTY): Make profile_info gcov_summary
	struct.
	* profile.c: Likewise.
	* profile.h: Likewise.

2018-06-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84846
	* gcov.c (output_lines): Print working directory only
	in intermediate format.

2018-06-05  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Add void function type.
	* config/s390/s390-builtins.def: Use the function type for the
	tbeginc builtin.

2018-06-04  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-protos.h (riscv_expand_epilogue): Change bool arg
	to int.
	* config/riscv/riscv.c (riscv_for_each_saved_reg): New args epilogue
	and maybe_eh_return.  Change regno to unsigned int.  Use new args to
	handle EH_RETURN_DATA_REGNO registers properly.
	(riscv_expand_prologue): Pass new args to riscv_for_each_saved_reg.
	(riscv_expand_epilogue): Update comment.  Change argument name and
	type.  Update code to use new name and type.  Pass new args to
	riscv_for_each_saved_reg.  Only use EH_RETURN_STACKADJ_RTX when
	EXCEPTION_RETURN.
	* config/riscv/riscv.md (NORMAL_RETURN): New.
	(SIBCALL_RETURN, EXCEPTION_RETURN): New.
	(epilogue, sibcall_epilogue): Update riscv_expand_epilogue arg.
	(eh_return): Call gen_eh_return_internal and emit barrier.
	(eh_return_internal): Call riscv_expand_epilogue.

2018-06-04  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-store-merging.c (struct merged_store_group): Move up
	bit_insertion field and declare can_be_merged_into method.
	(merged_store_group::can_be_merged_into): New method.
	(imm_store_chain_info::coalesce_immediate): Call it to decide whether
	consecutive non-overlapping stores can be merged.  Turn MEM_REF stores
	into BIT_INSERT_EXPR stores if the group contains a non-MEM_REF store.

2018-06-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85955
	* builtins.c (fold_builtin_sincos): Convert pointers to
	destination to appropriate type before dereferencing.

2018-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (abs<mode>2 for FLOAT128): Handle IFmode.

2018-06-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* expr.c (expand_expr_real_1): Force the operand into memory if
	its TYPE_MODE is BLKmode and if there is no integer mode for
	the number of bits being extracted.

2018-06-04  Jakub Jelinek  <jakub@redhat.com>

	PR target/85832
	PR target/86036
	* config/i386/sse.md (<avx512>_eq<mode>3<mask_scalar_merge_name>_1):
	Use vptestnm rather than vptestm in (=Yc,v,C) variant.

2018-06-04  Richard Biener  <rguenther@suse.de>

	* tree-cfgcleanup.c (cleanup_tree_cfg_1): Fold into...
	(cleanup_tree_cfg_noloop): ... single caller.  Do
	start_recording_case_labels later.

2018-06-04  Sebastian Peryt  <sebastian.peryt@intel.com>

	* config/i386/cldemoteintrin.h: Change define from _X86INTRIN_H_INCLUDED
	to _IMMINTRIN_H_INCLUDED.
	* config/i386/pconfigintrin.h: Ditto.
	* config/i386/waitpkgintrin.h: Ditto.
	* config/i386/immintrin.h: Add includes for sgxintrin.h,
	pconfigintrin.h, waitpkgintrin.h and cldemoteintrin.h.
	* config/i386/x86intrin.h: Remove includes for mintrin.h, xmmintrin.h,
	emmintrin.h, pmmintrin.h, tmmintrin.h, smmintrin.h, wmmintrin.h,
	bmiintrin.h, bmi2intrin.h, lzcntintrin.h, sgxintrin.h, pconfigintrin.h,
	waitpkgintrin.h and cldemoteintrin.h.

2018-06-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86038
	* tracer.c (find_best_successor): Check probability for
	being initialized, bail out if not.

2018-06-04  Richard Earnshaw  <rearnsha@arm.com>

	PR target/86003
	* config/arm/arm-cpus.in (ALL_QUIRKS): Add xscale feature to the list
	of bits to ignore when comparing architectures.

2018-06-04  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/69615
	* fold-const.c (merge_ranges): If range1 is - [x, x] and x is the
	maximum or minimum of the type, try to merge it also as if
	range1 is + [-, x - 1] or + [x + 1, -].

	PR c++/86025
	* tree.c (inchash::add_expr): Handle IDENTIFIER_NODE.

2018-06-03  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/86034
	* gimple-ssa-store-merging.c (output_merged_store): Convert the RHS to
	the unsigned bitfield type in a bit insertion sequence if it does not
	have a larger precision than the bitfield size.
	(process_store): Also bypass widening conversions for BIT_INSERT_EXPR.

2018-06-03  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-peephole2.md: Add new patterns for code size.

2018-06-03  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-opts.h (nds32_arch_type): Add ARCH_V3J.
	* config/nds32/nds32.c (nds32_option_override): Consider ARCH_V3J.
	* config/nds32/nds32.h (TARGET_ISA_V3): Add ARCH_V3J checking.
	* config/nds32/nds32.opt (march): Add enum value Value(ARCH_V3J).

2018-06-03  Chung-Ju Wu  <jasonwucj@gmail.com>

	* common/config/nds32/nds32-common.c (nds32_option_optimization_table):
	Disable -fdelete-null-pointer-checks for ELF toolchain.

2018-06-02  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config.gcc (nds32*): Use nds32-linux.opt and nds32-elf.opt.
	(nds32le-*-*, nds32be-*-*): Integrate checking process.
	(nds32*-*-*): Add glibc and uclibc conditions.
	* common/config/nds32/nds32-common.c (nds32_except_unwind_info): New.
	(TARGET_EXCEPT_UNWIND_INFO): Define.
	* config/nds32/elf.h: New file.
	* config/nds32/linux.h: New file.
	* config/nds32/nds32-elf.opt: New file.
	* config/nds32/nds32-linux.opt: New file.
	* config/nds32/nds32-fp-as-gp.c
	(pass_nds32_fp_as_gp::gate): Consider TARGET_LINUX_ABI.
	* config/nds32/nds32.c (nds32_conditional_register_usage): Consider
	TARGET_LINUX_ABI.
	(nds32_asm_file_end): Ditto.
	(nds32_print_operand): Ditto.
	(nds32_insert_attributes): Ditto.
	(nds32_init_libfuncs): New function.
	(TARGET_HAVE_TLS): Define.
	(TARGET_INIT_LIBFUNCS): Define.
	* config/nds32/nds32.h (TARGET_DEFAULT_RELAX): Apply different relax
	spec content.
	(TARGET_ELF): Apply different mcmodel setting.
	(LINK_SPEC, LIB_SPEC, STARTFILE_SPEC, ENDFILE_SPEC): The content has
	been migrated into elf.h and linux.h files.
	* config/nds32/nds32.md (add_pc): Consider TARGET_LINUX_ABI.
	* config/nds32/nds32.opt (mvh): Consider TARGET_LINUX_ABI.
	(mcmodel): The content has been migrated into nds32-elf.opt and
	nds32-linux.opt files.
	* config/nds32/t-elf: New file.
	* config/nds32/t-linux: New file.

2018-06-02  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Shiva Chen  <shiva0217@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add
	UNSPEC_VOLATILE_OMIT_FP_BEGIN and UNSPEC_VOLATILE_OMIT_FP_END.
	* config/nds32/nds32-fp-as-gp.c: New implementation of fp_as_gp
	optimization.
	* config/nds32/nds32-protos.h (nds32_naked_function_p): Declare.
	(make_pass_nds32_fp_as_gp): Declare.
	* config/nds32/nds32.c (nds32_register_passes): Add fp_as_gp as one
	optmization pass.
	(nds32_asm_function_end_prologue): Remove unused asm output.
	(nds32_asm_function_begin_epilogue): Remove unused asm output.
	(nds32_asm_file_start): Output necessary fp_as_gp information.
	(nds32_option_override): Adjust register usage.
	(nds32_expand_prologue): Consider fp_as_gp situation.
	(nds32_expand_prologue_v3push): Consider fp_as_gp situation.
	* config/nds32/nds32.md (prologue): Check fp_as_gp_p and naked_p.
	(epilogue): Ditto.
	(return): Ditto.
	(simple_return): Ditto.
	(omit_fp_begin): Output special directive for fp_as_gp.
	(omit_fp_end): Output special directive for fp_as_gp.
	* config/nds32/nds32.opt (mfp-as-gp, mno-fp-as-gp, mforce-fp-as-gp,
	mforbid-fp-as-gp): New options.

2018-06-01  Mark Wielaard  <mark@klomp.org>

	* dwarf2out.c (dwarf2out_finish): Remove generation of
	DW_AT_loclists_base.

2018-06-01  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-store-merging.c: Include gimple-fold.h.
	(struct store_immediate_info): Document BIT_INSERT_EXPR stores.
	(struct merged_store_group): Add bit_insertion field.
	(dump_char_array): Use standard hexadecimal format.
	(merged_store_group::merged_store_group): Set bit_insertion to false.
	(merged_store_group::apply_stores): Use optimal buffer size.  Deal
	with BIT_INSERT_EXPR stores.  Move up code updating the mask and
	also print the mask in the dump file.
	(pass_store_merging::gate): Minor tweak.
	(imm_store_chain_info::coalesce_immediate): Fix wrong association
	of stores with groups in dump.  Allow coalescing of BIT_INSERT_EXPR
	stores with INTEGER_CST stores.
	(count_multiple_uses) <BIT_INSERT_EXPR>: New case.
	(imm_store_chain_info::output_merged_store): Add try_bitpos variable
	and use it throughout.  Generate bit insertion sequences if need be.
	(pass_store_merging::process_store): Remove redundant condition.
	Record stores from a SSA name to a bit-field with BIT_INSERT_EXPR.

2018-06-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_mangle_type): Change the mangling of
	the 128-bit floating point types.  Fix function comment.

2018-06-01  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-simd.md
	(aarch64_simd_vec_unpack<su>_lo_<mode>): Use UXTL and SXTL assembler
	mnemonics.
	(aarch64_simd_vec_unpack<su>_hi_<mode>): Use UXTL2 and SXTL2 assembler
	mnemonics.

2018-06-01  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/85989
	* gimple-ssa-backprop.c (backprop::m_visited_phis): New member
	variable.
	(backprop::intersect_uses): Check it when deciding whether this
	is a backedge reference.
	(backprop::process_block): Add each phi to m_visited_phis
	after visiting it, then clear it at the end.

2018-06-01  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_dr_stmt): New function.
	(vect_get_load_cost): Adjust.
	(vect_get_store_cost): Likewise.
	* tree-vect-data-refs.c (vect_analyze_data_ref_dependence):
	Use vect_dr_stmt instead of DR_SMTT.
	(vect_record_base_alignments): Likewise.
	(vect_calculate_target_alignment): Likewise.
	(vect_compute_data_ref_alignment): Likewise and make static.
	(vect_update_misalignment_for_peel): Likewise.
	(vect_verify_datarefs_alignment): Likewise.
	(vector_alignment_reachable_p): Likewise.
	(vect_get_data_access_cost): Likewise.  Pass down
	vinfo to vect_get_load_cost/vect_get_store_cost instead of DR.
	(vect_get_peeling_costs_all_drs): Likewise.
	(vect_peeling_hash_get_lowest_cost): Likewise.
	(vect_enhance_data_refs_alignment): Likewise.
	(vect_find_same_alignment_drs): Likewise.
	(vect_analyze_data_refs_alignment): Likewise.
	(vect_analyze_group_access_1): Likewise.
	(vect_analyze_group_access): Likewise.
	(vect_analyze_data_ref_access): Likewise.
	(vect_analyze_data_ref_accesses): Likewise.
	(vect_vfa_segment_size): Likewise.
	(vect_small_gap_p): Likewise.
	(vectorizable_with_step_bound_p): Likewise.
	(vect_prune_runtime_alias_test_list): Likewise.
	(vect_analyze_data_refs): Likewise.
	(vect_supportable_dr_alignment): Likewise.
	* tree-vect-loop-manip.c (get_misalign_in_elems): Likewise.
	(vect_gen_prolog_loop_niters): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
	* tree-vect-patterns.c (vect_recog_bool_pattern): Do not
	modify DR_STMT.
	(vect_recog_mask_conversion_pattern): Likewise.
	(vect_try_gather_scatter_pattern): Likewise.
	* tree-vect-stmts.c (vect_model_store_cost): Pass stmt_info
	to vect_get_store_cost.
	(vect_get_store_cost): Get stmt_info instead of DR.
	(vect_model_load_cost): Pass stmt_info to vect_get_load_cost.
	(vect_get_load_cost): Get stmt_info instead of DR.

2018-06-01  Richard Biener  <rguenther@suse.de>

	PR middle-end/86017
	* gimple-fold.c (var_decl_component_p): Also allow offsetted
	vars wrapped in MEM_REFs.

2018-06-01  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_ira_change_pseudo_allocno_class):
	Fix subreg tests so that we only return a choice between
	GENERAL_REGS and FP_REGS if the original classes included both.

2018-06-01  Richard Biener  <rguenther@suse.de>

	PR ipa/85960
	* tree-ssa-structalias.c (get_function_part_constraint):
	Handle NULL fi->decl.
	(find_func_aliases_for_call): Properly handle indirect
	fi from direct call.
	(find_func_clobbers): Likewise.
	(ipa_pta_execute): Likewise.
	(create_variable_info_for): For functions that are ifunc_resolver
	resolve to a varinfo that contains the result of the resolver call.
	(associate_varinfo_to_alias): Do not treat ifunc resolvers as
	aliases.

2018-05-31  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64.md:
	(*fix_to_zero_extenddfdi2): New pattern.
	* gcc.target/aarch64/fix_extend1.c: New testcase.

2018-05-31  Qing Zhao <qing.zhao@oracle.com>

	PR middle-end/78809
	PR middle-end/83026
	* builtins.c (expand_builtin): Add the handling of BUILT_IN_STRCMP_EQ
	and BUILT_IN_STRNCMP_EQ.
	* builtins.def: Add new builtins BUILT_IN_STRCMP_EQ and
	BUILT_IN_STRNCMP_EQ.
	* gimple-fold.c (gimple_fold_builtin_string_compare): Add the
	handling of BUILTIN_IN_STRCMP_EQ and BUILT_IN_STRNCMP_EQ.
	(gimple_fold_builtin): Likewise.
	* tree-ssa-strlen.c (compute_string_length): New function.
	(determine_min_obsize): New function.
	(handle_builtin_string_cmp): New function to handle calls to
	string compare functions.
	(strlen_optimize_stmt): Add handling to builtin string compare
	calls.
	* tree-ssa-structalias.c (find_func_aliases_for_builtin_call):
	Add the handling of BUILT_IN_STRCMP_EQ and BUILT_IN_STRNCMP_EQ.
	* tree.c (build_common_builtin_nodes): Add new defines of
	BUILT_IN_STRNCMP_EQ and BUILT_IN_STRCMP_EQ.

2018-05-31  Jakub Jelinek  <jakub@redhat.com>

	PR target/85984
	* bb-reorder.c (pass_partition_blocks::gate): Return false for
	functions with naked attribute.

2018-05-31  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (avx_vec_concat<mode>):
	Substitute concat_tg_mode mode attribute with xtg_mode.
	(<mask_codefor>avx512dq_broadcast<mode><mask_name>_1): Ditto.
	(concat_tg_mode): Remove mode attribute.

2018-05-31  Martin Sebor  <msebor@redhat.com>

	PR c/82063
	* calls.c (alloc_max_size): Correct a logic error/typo.
	Treat excessive arguments as infinite.  Warn for invalid arguments.
	* doc/invoke.texi (-Walloc-size-larger-than): Update.

2018-05-31  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85829
	* config/i386/x86-tune.def: Re-enable partial_reg_dependency
	and movx for Haswell.

2018-05-31  Chung-Lin Tang  <cltang@codesourcery.com>
	    Cesar Philippidis  <cesar@codesourcery.com>

	PR middle-end/85879
	* gimplify.c (gimplify_adjust_omp_clauses): Add 'remove = true'
	when emitting error on private/firstprivate reductions.
	* omp-low.c (lower_omp_target): Avoid reference-type processing
	on pointers for firstprivate clause.

2018-05-31  Sameera Deshpande <sameera.deshpande@linaro.org>

	* config/aarch64/aarch64-simd-builtins.def (ld1x3): New.
	(st1x2): Likewise.
	(st1x3): Likewise.
	* config/aarch64/aarch64-simd.md
	(aarch64_ld1x3<VALLDIF:mode>): New pattern.
	(aarch64_ld1_x3_<mode>): Likewise
	(aarch64_st1x2<VALLDIF:mode>): Likewise
	(aarch64_st1_x2_<mode>): Likewise
	(aarch64_st1x3<VALLDIF:mode>): Likewise
	(aarch64_st1_x3_<mode>): Likewise
	* config/aarch64/arm_neon.h (vld1_u8_x3): New function.
	(vld1_s8_x3): Likewise.
	(vld1_u16_x3): Likewise.
	(vld1_s16_x3): Likewise.
	(vld1_u32_x3): Likewise.
	(vld1_s32_x3): Likewise.
	(vld1_u64_x3): Likewise.
	(vld1_s64_x3): Likewise.
	(vld1_f16_x3): Likewise.
	(vld1_f32_x3): Likewise.
	(vld1_f64_x3): Likewise.
	(vld1_p8_x3): Likewise.
	(vld1_p16_x3): Likewise.
	(vld1_p64_x3): Likewise.
	(vld1q_u8_x3): Likewise.
	(vld1q_s8_x3): Likewise.
	(vld1q_u16_x3): Likewise.
	(vld1q_s16_x3): Likewise.
	(vld1q_u32_x3): Likewise.
	(vld1q_s32_x3): Likewise.
	(vld1q_u64_x3): Likewise.
	(vld1q_s64_x3): Likewise.
	(vld1q_f16_x3): Likewise.
	(vld1q_f32_x3): Likewise.
	(vld1q_f64_x3): Likewise.
	(vld1q_p8_x3): Likewise.
	(vld1q_p16_x3): Likewise.
	(vld1q_p64_x3): Likewise.
	(vst1_s64_x2): Likewise.
	(vst1_u64_x2): Likewise.
	(vst1_f64_x2): Likewise.
	(vst1_s8_x2): Likewise.
	(vst1_p8_x2): Likewise.
	(vst1_s16_x2): Likewise.
	(vst1_p16_x2): Likewise.
	(vst1_s32_x2): Likewise.
	(vst1_u8_x2): Likewise.
	(vst1_u16_x2): Likewise.
	(vst1_u32_x2): Likewise.
	(vst1_f16_x2): Likewise.
	(vst1_f32_x2): Likewise.
	(vst1_p64_x2): Likewise.
	(vst1q_s8_x2): Likewise.
	(vst1q_p8_x2): Likewise.
	(vst1q_s16_x2): Likewise.
	(vst1q_p16_x2): Likewise.
	(vst1q_s32_x2): Likewise.
	(vst1q_s64_x2): Likewise.
	(vst1q_u8_x2): Likewise.
	(vst1q_u16_x2): Likewise.
	(vst1q_u32_x2): Likewise.
	(vst1q_u64_x2): Likewise.
	(vst1q_f16_x2): Likewise.
	(vst1q_f32_x2): Likewise.
	(vst1q_f64_x2): Likewise.
	(vst1q_p64_x2): Likewise.
	(vst1_s64_x3): Likewise.
	(vst1_u64_x3): Likewise.
	(vst1_f64_x3): Likewise.
	(vst1_s8_x3): Likewise.
	(vst1_p8_x3): Likewise.
	(vst1_s16_x3): Likewise.
	(vst1_p16_x3): Likewise.
	(vst1_s32_x3): Likewise.
	(vst1_u8_x3): Likewise.
	(vst1_u16_x3): Likewise.
	(vst1_u32_x3): Likewise.
	(vst1_f16_x3): Likewise.
	(vst1_f32_x3): Likewise.
	(vst1_p64_x3): Likewise.
	(vst1q_s8_x3): Likewise.
	(vst1q_p8_x3): Likewise.
	(vst1q_s16_x3): Likewise.
	(vst1q_p16_x3): Likewise.
	(vst1q_s32_x3): Likewise.
	(vst1q_s64_x3): Likewise.
	(vst1q_u8_x3): Likewise.
	(vst1q_u16_x3): Likewise.
	(vst1q_u32_x3): Likewise.
	(vst1q_u64_x3): Likewise.
	(vst1q_f16_x3): Likewise.
	(vst1q_f32_x3): Likewise.
	(vst1q_f64_x3): Likewise.
	(vst1q_p64_x3): Likewise.

2018-05-30  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_output_labelref): Prepend
	user_label_prefix to name.

	* tree-core.h: Update comment about the format of NAME string
	passed to handler in attribute_spec.

	* config/msp430/msp430.md: Remove erroneous subreg expression from
	zero_extendqisi2 insn pattern. Remove msp430x ISA restriction on
	zero_extend{q,h}isi2.

2018-05-30  Borislav Petkov  <bp@suse.de>

	* doc/extend.texi: Document some architecture specific
	constraints and sort entries.

2018-05-30  Martin Sebor  <msebor@redhat.com>

	PR middle-end/85369
	* builtins.c (expand_builtin_stpcpy_1): New function.
	(expand_builtin_stpcpy): Call it, and call maybe_warn_nonstring_arg
	only if the former succeeds.

2018-05-31  Sameera Deshpande <sameera.deshpande@linaro.org>

	* config/aarch64/aarch64-cores.def (saphira) : Add support for ARMv8.4
	in saphira.

2018-05-30  Jan Hubicka  <hubicka@ucw.cz>

	* doc/invoke.texi (-flinker-output): Document

2018-05-30  Jan Hubicka  <hubicka@ucw.cz>

	* passes.c (ipa_write_summaries): Only modify statements if body
	is in memory.
	* cgraphunit.c (ipa_passes): Also produce intermeidate code when
	incrementally linking.
	(ipa_passes): Likewise.
	* lto-cgraph.c (lto_output_node): When incrementally linking do not
	pass down resolution info.
	* common.opt (flag_incremental_link): Update info.
	* gcc.c (plugin specs): Turn flinker-output=* to
	-plugin-opt=-linker-output-known
	* toplev.c (compile_file): Also cut compilation when doing incremental
	link.
	* flag-types. (enum lto_partition_model): Add
	LTO_LINKER_OUTPUT_NOLTOREL.
	(invoke.texi): Add -flinker-output docs.
	* ipa.c (symbol_table::remove_unreachable_nodes): Handle LTO incremental
	link same way as WPA; do not stream in dead initializers.

	* dwarf2out.c (dwarf2out_die_ref_for_decl,
	darf2out_register_external_decl): Support incremental link.

2018-05-30  Jan Hubicka  <hubicka@ucw.cz>

	* lto-opts.c (lto_write_options): Skip OPT_dumpdir, OPT_fresolution_.

2018-05-30  Jan Hubicka  <hubicka@ucw.cz>

	* lto-wrapper.c (debug_objcopy): Add rename parameter; pass
	it down to simple_object_copy_lto_debug_sections.
	(run_gcc): Determine incremental LTO link time and configure
	lto1 into non-wpa mode, disable renaming of debug sections.

2018-05-30  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* doc/extend.texi (PowerPC AltiVec Built-in Functions): Remove
	descriptions of various incorrectly documented functions.

2018-05-30  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	Revert:
	* config/aarch64/predicates.md (aarch64_mem_pair_lanes_operand): Make
	address check not strict.

2018-05-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85964
	* tracer.c (better_p): Drop initialized count check, we only
	call the function with initialized counts now.
	(find_best_successor): Do find a best edge if one
	has uninitialized count.
	(find_best_predecessor): Likewise.  Do BB frequency check only
	if count is initialized.

2017-05-30  Jackson Woodruff  <jackson.woodruff@arm.com>

	* config/aarch64/aarch64.c (aarch64_host_wide_int_compare): New.
	(aarch64_ldrstr_offset_compare): New.
	(aarch64_operands_adjust_ok_for_ldpstp): Update to consider all
	load/store orderings.
	(aarch64_gen_adjusted_ldpstp): Likewise.

2018-05-30  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (aarch64_ira_change_pseudo_allocno_class):
	Check for subset of GENERAL_REGS and FP_REGS.
	* config/aarch64/aarch64-simd.md (aarch64_get_lane): Increase cost of
	r=w alternative.

2018-05-30  Richard Sandiford  <richard.sandiford@linaro.org>

	* alias.c (adjust_offset_for_component_ref): Use poly_int_tree_p
	and wi::to_poly_offset.  Add the current offset and then check
	whether the sum fits, rather than using an unchecked addition of
	a checked term.  Check for a shwi rather than a uhwi.
	* expr.c (get_bit_range): Use tree_to_poly_uint64.
	(store_constructor): Use poly_int_tree_p.
	(expand_expr_real_1): Likewise.
	* function.c (assign_temp): Likewise.
	* fold-const.c (const_binop): Use poly_int_tree_p and
	wi::to_poly_offset.
	(fold_indirect_ref_1): Likewise.  Use multiple_p to attempt an exact
	division.
	* ipa-icf-gimple.c (func_checker::compare_operand): Use
	to_poly_offset for MEM offsets.
	* ipa-icf.c (sem_variable::equals): Likewise.
	* stor-layout.c (compute_record_mode): Use poly_int_tree_p.
	* tree-ssa-sccvn.c (ao_ref_init_from_vn_reference): Use
	wi::to_poly_offset for BIT_FIELD_REF offsets.
	(vn_reference_maybe_forwprop_address): Use poly_int_tree_p and
	wi::to_poly_offset.
	* var-tracking.c (emit_note_insn_var_location): Use
	tree_to_poly_uint64.

2018-05-29  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_interrupt_type): Fix comment typo.

2018-05-29  Uros Bizjak  <ubizjak@gmail.com>

	PR target/85950
	* config/i386/i386.md (l<rounding_insn><MODEF:mode><SWI48:mode>2):
	Enable for TARGET_SSE4_1 and generate rounds{s,d} and cvtts{s,d}2si{,q}
	sequence.
	(sse4_1_round<mode>2): Use nonimmediate_operand
	for operand 1 predicate.

2018-05-29  Martin Sebor  <msebor@redhat.com>
	    Richard Biener  <rguenther@suse.de>

	PR testsuite/85888
	* calls.c (get_size_range): Call determine_value_range instead
	of get_value_range..
	* tree-vrp.h (determine_value_range): Declared new function.
	* tree-vrp.c (determine_value_range_1, determine_value_range): New.

2018-05-29  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_preserves_scalar_order_p): Make
	sure to use non-pattern stmts for get_earlier_stmt arguments.
	* tree-vectorizer.h (get_earlier_stmt): Assert we do not get
	called on pattern stmts.
	(get_later_stmt): Likewise.

2018-05-29  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/85759
	* doc/gcov.texi: Document GCOV_ERROR_FILE and GCOV_EXIT_AT_ERROR
	env variables.

2018-05-29  Jakub Jelinek  <jakub@redhat.com>

	* tree-cfg.c (verify_gimple_assign_unary): Add checking for
	VEC_UNPACK_*_EXPR.
	(verify_gimple_assign_binary): Check TYPE_VECTOR_SUBPARTS for
	VEC_PACK_*_EXPR.

	PR target/85918
	* tree.def (VEC_UNPACK_FIX_TRUNC_HI_EXPR, VEC_UNPACK_FIX_TRUNC_LO_EXPR,
	VEC_PACK_FLOAT_EXPR): New tree codes.
	* tree-pretty-print.c (op_code_prio): Handle
	VEC_UNPACK_FIX_TRUNC_HI_EXPR and VEC_UNPACK_FIX_TRUNC_LO_EXPR.
	(dump_generic_node): Handle VEC_UNPACK_FIX_TRUNC_HI_EXPR,
	VEC_UNPACK_FIX_TRUNC_LO_EXPR and VEC_PACK_FLOAT_EXPR.
	* tree-inline.c (estimate_operator_cost): Likewise.
	* gimple-pretty-print.c (dump_binary_rhs): Handle VEC_PACK_FLOAT_EXPR.
	* fold-const.c (const_binop): Likewise.
	(const_unop): Handle VEC_UNPACK_FIX_TRUNC_HI_EXPR and
	VEC_UNPACK_FIX_TRUNC_LO_EXPR.
	* tree-cfg.c (verify_gimple_assign_unary): Likewise.
	(verify_gimple_assign_binary): Handle VEC_PACK_FLOAT_EXPR.
	* cfgexpand.c (expand_debug_expr): Handle VEC_UNPACK_FIX_TRUNC_HI_EXPR,
	VEC_UNPACK_FIX_TRUNC_LO_EXPR and VEC_PACK_FLOAT_EXPR.
	* expr.c (expand_expr_real_2): Likewise.
	* optabs.def (vec_packs_float_optab, vec_packu_float_optab,
	vec_unpack_sfix_trunc_hi_optab, vec_unpack_sfix_trunc_lo_optab,
	vec_unpack_ufix_trunc_hi_optab, vec_unpack_ufix_trunc_lo_optab): New
	optabs.
	* optabs.c (expand_widen_pattern_expr): For
	VEC_UNPACK_FIX_TRUNC_HI_EXPR and VEC_UNPACK_FIX_TRUNC_LO_EXPR use
	sign from result type rather than operand's type.
	(expand_binop_directly): For vec_packu_float_optab and
	vec_packs_float_optab allow result type to be different from operand's
	type.
	* optabs-tree.c (optab_for_tree_code): Handle
	VEC_UNPACK_FIX_TRUNC_HI_EXPR, VEC_UNPACK_FIX_TRUNC_LO_EXPR and
	VEC_PACK_FLOAT_EXPR.  Formatting fixes.
	* tree-vect-generic.c (expand_vector_operations_1):  Handle
	VEC_UNPACK_FIX_TRUNC_HI_EXPR, VEC_UNPACK_FIX_TRUNC_LO_EXPR and
	VEC_PACK_FLOAT_EXPR.
	* tree-vect-stmts.c (supportable_widening_operation): Handle
	FIX_TRUNC_EXPR.
	(supportable_narrowing_operation): Handle FLOAT_EXPR.
	* config/i386/i386.md (fixprefix, floatprefix): New code attributes.
	* config/i386/sse.md (*float<floatunssuffix>v2div2sf2): Rename to ...
	(float<floatunssuffix>v2div2sf2): ... this.  Formatting fix.
	(vpckfloat_concat_mode, vpckfloat_temp_mode, vpckfloat_op_mode): New
	mode attributes.
	(vec_pack<floatprefix>_float_<mode>): New expander.
	(vunpckfixt_mode, vunpckfixt_model, vunpckfixt_extract_mode): New mode
	attributes.
	(vec_unpack_<fixprefix>fix_trunc_lo_<mode>,
	vec_unpack_<fixprefix>fix_trunc_hi_<mode>): New expanders.
	* doc/md.texi (vec_packs_float_@var{m}, vec_packu_float_@var{m},
	vec_unpack_sfix_trunc_hi_@var{m}, vec_unpack_sfix_trunc_lo_@var{m},
	vec_unpack_ufix_trunc_hi_@var{m}, vec_unpack_ufix_trunc_lo_@var{m}):
	Document.
	* doc/generic.texi (VEC_UNPACK_FLOAT_HI_EXPR,
	VEC_UNPACK_FLOAT_LO_EXPR): Fix pasto in description.
	(VEC_UNPACK_FIX_TRUNC_HI_EXPR, VEC_UNPACK_FIX_TRUNC_LO_EXPR,
	VEC_PACK_FLOAT_EXPR): Document.

2018-05-29  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (struct vec_info): Add stmt_vec_infos
	member.
	(stmt_vec_info_vec): Make pointer.
	(init_stmt_vec_info_vec): Remove.
	(free_stmt_vec_info_vec): Likewise.
	(set_stmt_vec_info_vec): New function.
	(free_stmt_vec_infos): Likewise.
	(vinfo_for_stmt): Adjust for stmt_vec_info_vec indirection.
	(set_vinfo_for_stmt): Likewise.
	(get_earlier_stmt): Likewise.
	(get_later_stmt): Likewise.
	* tree-vectorizer.c (stmt_vec_info_vec): Make pointer.
	(vec_info::vec_info): Allocate stmt_vec_infos and set the global.
	(vec_info::~vec_info): Free stmt_vec_infos.
	(vectorize_loops): Set the global stmt_vec_info_vec to NULL.
	Remove old init_stmt_vec_info_vec/free_stmt_vec_info_vec calls.
	(pass_slp_vectorize::execute): Likewise.
	* tree-vect-stmts.c (init_stmt_vec_info_vec): Remove.
	(free_stmt_vec_info_vec): Likewise.
	(set_stmt_vec_info_vec): New function.
	(free_stmt_vec_infos): Likewise.
	* tree-vect-loop.c (_loop_vec_info::~_loop_vec_info): Set
	the global stmt_vec_info_vec.
	* tree-parloops.c (gather_scalar_reductions): Use
	set_stmt_vec_info_vec/free_stmt_vec_infos and maintain a local
	vector.

2018-05-29  Richard Biener  <rguenther@suse.de>

	* dominance.c (iterate_fix_dominators): Push/pop TV_DOMINANCE.

2018-05-29  Martin Liska  <mliska@suse.cz>
	    David Malcolm  <dmalcolm@redhat.com>

	* vec.c (test_reverse): New.
	(vec_c_tests): Add new test.
	* vec.h (vl_ptr>::reverse): New function.

2018-05-29  Gerald Pfeifer  <gerald@pfeifer.com>

	* config.gcc: Identify FreeBSD 3.x and 4.x as unsupported.

	* config/freebsd-spec.h (FBSD_LIB_SPEC): Only consider FreeBSD 5
	and later.

2018-05-28  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* tree-dump.c (dump_node): Use splay_tree_delete_pointers.

2018-05-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85933
	* tree-vect-data-refs.c (vect_record_base_alignments): Only
	look at stmts marked as vectorizable.

2018-05-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85934
	* tree-vect-generic.c (expand_vector_operations_1): Hoist
	vector boolean check before scalar optimization.

2018-05-28  Jakub Jelinek  <jakub@redhat.com>

	* doc/invoke.texi (ARM Options): Use @item instead of @itemx
	for armv5te.

2018-05-28  Mark Wielaard  <mark@klomp.org>

	* dwarf2asm.c (dw2_asm_output_delta_uleb128): Add brackets around lab2
	if it is an expression containing a minus sign.

2018-05-27  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa-linux.h (NEED_INDICATE_EXEC_STACK): Define to 0.

2018-05-27  Paul Koning  <ni1d@arrl.net>

	* config/pdp11/pdp11.md (truncsihi2): Remove.

2018-05-27  Monk Chiang  <sh.chiang04@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-intrinsic.md (unaligned_storedi): Modify patterns
	implementation.
	(unaligned_store_dw): Ditto.
	* config/nds32/nds32-memory-manipulation.c
	(nds32_expand_movmemsi_loop_known_size): Refactoring implementation.
	(nds32_gen_dup_4_byte_to_word_value): Rename to ...
	(nds32_gen_dup_4_byte_to_word_value_aux): ... this.
	(emit_setmem_word_loop): Rename to ...
	(emit_setmem_doubleword_loop): ... this.
	(nds32_gen_dup_4_byte_to_word_value): New function.
	(nds32_gen_dup_8_byte_to_double_word_value): New function.
	(nds32_expand_setmem_loop): Refine implementation.
	(nds32_expand_setmem_loop_v3m): Ditto.
	* config/nds32/nds32-multiple.md (unaligned_store_update_base_dw): New
	pattern.

2018-05-27  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (bswapsi2, bswaphi2): New patterns.

2018-05-27  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_attribute_table): Add "no_prologue".
	(nds32_init_machine_status): Initialize machine->attr_naked_p and
	machine->attr_no_prologue_p.
	(nds32_compute_stack_frame): Check "naked" and "no_prologue" attributes.
	(nds32_naked_function_p): Handle "naked" and "no_prologue" attributes.
	(nds32_expand_epilogue): Consider attr_naked_p.
	(nds32_expand_epilogue_v3pop): Likewise.
	(nds32_can_use_return_insn): Likewise.
	* config/nds32/nds32.h (machine_function): Add attr_naked_p and
	attr_no_prologue_p fields.
	* config/nds32/nds32.opt (mret-in-naked-func): New option.

2018-05-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/85918
	* config/i386/i386.md (fixunssuffix, floatunssuffix): New code
	attributes.
	* config/i386/sse.md
	(<floatsuffix>float<sseintvecmodelower><mode>2<mask_name><round_name>):
	Rename to ...
	(float<floatunssuffix><sseintvecmodelower><mode>2<mask_name><round_name>):
	... this.
	(<floatsuffix>float<sselongvecmodelower><mode>2<mask_name><round_name>):
	Rename to ...
	(float<floatunssuffix><sselongvecmodelower><mode>2<mask_name><round_name>):
	... this.
	(*<floatsuffix>floatv2div2sf2): Rename to ...
	(*float<floatunssuffix>v2div2sf2): ... this.
	(<floatsuffix>floatv2div2sf2_mask): Rename to ...
	(float<floatunssuffix>v2div2sf2_mask): ... this.
	(*<floatsuffix>floatv2div2sf2_mask_1): Rename to ...
	(*float<floatunssuffix>v2div2sf2_mask_1): ... this.
	(<fixsuffix>fix_truncv8dfv8si2<mask_name><round_saeonly_name>): Rename
	to ...
	(fix<fixunssuffix>_truncv8dfv8si2<mask_name><round_saeonly_name>):
	... this.
	(<fixsuffix>fix_trunc<mode><sseintvecmodelower>2<mask_name><round_saeonly_name>):
	Rename to ...
	(fix<fixunssuffix>_trunc<mode><sseintvecmodelower>2<mask_name><round_saeonly_name>):
	... this.
	(<fixsuffix>fix_trunc<mode><sselongvecmodelower>2<mask_name><round_saeonly_name>):
	Rename to ...
	(fix<fixunssuffix>_trunc<mode><sselongvecmodelower>2<mask_name><round_saeonly_name>):
	... this.
	(<fixsuffix>fix_truncv2sfv2di2<mask_name>): Rename to ...
	(fix<fixunssuffix>_truncv2sfv2di2<mask_name>): ... this.
	(vec_pack_ufix_trunc_<mode>): Use gen_fixuns_truncv8dfv8si2 instead of
	gen_ufix_truncv8dfv8si2.
	* config/i386/i386-builtin.def (__builtin_ia32_cvttpd2uqq256_mask,
	__builtin_ia32_cvttpd2uqq128_mask, __builtin_ia32_cvttps2uqq256_mask,
	__builtin_ia32_cvttps2uqq128_mask, __builtin_ia32_cvtuqq2ps256_mask,
	__builtin_ia32_cvtuqq2ps128_mask, __builtin_ia32_cvtuqq2pd256_mask,
	__builtin_ia32_cvtuqq2pd128_mask, __builtin_ia32_cvttpd2udq512_mask,
	__builtin_ia32_cvtuqq2ps512_mask, __builtin_ia32_cvtuqq2pd512_mask,
	__builtin_ia32_cvttps2uqq512_mask, __builtin_ia32_cvttpd2uqq512_mask):
	Use fixuns instead ufix or floatuns instead ufloat in CODE_FOR_ names.

2018-05-24  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85900
	PR target/85345
	* varasm.c (assemble_alias): Lookup ifunc attribute on error.

2018-05-25  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-protos.h (riscv_epilogue_uses): New.
	* config/riscv/riscv.c (struct machine_function): Add
	interrupt_handler_p and attribute_checked_p fields.
	(riscv_attribute_table): Add interrupt.
	(riscv_interrupt_type_p): New.
	(riscv_save_reg_p): Save extra regs for interrupt handler.
	(riscv_use_save_libcall): Return false  for interrupt handler.
	(riscv_first_stack_step): Add forward declaration.
	(riscv_compute_frame_info): New local interrupt_save_t1.  Set it
	for interrupt handler with large frame.  Use it for saved reg list.
	(riscv_expand_prologue): Move flag_stack_usage_info support to
	eliminate duplication.
	(riscv_expand_epilogue): Generate mret for interrupt handler.
	(riscv_epilogue_uses): New.
	(riscv_can_use_return_insn): Return false for interrupt handler.
	(riscv_function_ok_for_sibcall): Likewise.
	(riscv_set_current_function): Add interrupt handler support.
	* config/riscv/riscv.h (EPILOGUE_USES): Call riscv_epilogue_uses.
	* config/riscv/riscv.md (UNSPECV_MRET): New.
	(GP_REGNUM): New.
	(riscv_frflags, riscv_fsflags): Use tab after opcode.
	(riscv_mret): New.
	* doc/extend.texi (RISC-V Function Attributes) <interrupt>: New.

2018-05-25  Bill Schmidt  <wschmidt@linux.ibm.com>

	PR tree-optimization/85712
	* gimple-ssa-strength-reduction.c (replace_one_candidate): Skip if
	this candidate has already been replaced in-situ by a copy.

2018-05-25  Jason Merrill  <jason@redhat.com>

	PR c++/80485 - inline function non-zero address.
	* symtab.c (nonzero_address): Check DECL_COMDAT.

2018-05-25  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* config/alpha/alpha.md (ashlsi3): New insn pattern.
	(*ashlsi_se): Rename from *ashldi_se.  Define as sign
	extension of SImode operation.  Use const123_operand predicate.
	(*saddsi_1): Remove.
	(*saddl_se_1): Ditto.
	(*ssubsi_1): Ditto.
	(*ssubl_se_1): Ditto.
	* config/alpha/predicates.md (const123_operand): New predicate.
	* config/alpha/constraints.md (P): Use IN_RANGE.

2018-05-25  Richard Biener  <rguenther@suse.de>

	* tree-ssa-alias.h (refs_may_alias_p): Add tbaa_p bool parameter,
	defaulted to true.
	(ref_maybe_used_by_stmt_p): Likewise.
	(stmt_may_clobber_ref_p): Likewise.
	(stmt_may_clobber_ref_p_1): Likewise.
	* tree-ssa-alias.c (refs_may_alias_p): Add tbaa_p bool parameter
	and pass it along.
	(ref_maybe_used_by_stmt_p): Likewise.
	(stmt_may_clobber_ref_p): Likewise.
	(stmt_may_clobber_ref_p_1): Likewise.
	* tree-vect-data-refs.c (vect_slp_analyze_node_dependences): Use
	the alias oracle to disambiguate DRs with stmts DR analysis
	couldn't handle.
	(vect_analyze_data_refs): Do not give up on not analyzable
	DRs for BB vectorization.  Remove code truncating the dataref
	vector.

2018-05-25  Jakub Jelinek  <jakub@redhat.com>

	PR target/85832
	* config/i386/sse.md (<avx512>_eq<mode>3<mask_scalar_merge_name>_1):
	Add (=Yk,v,C) variant using vptestm insn.  Use TARGET_AVX512BW
	in test instead of TARGET_AVX512F for VI12_AVX512VL iterator.

2018-05-25  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_find_stmt_data_reference): New
	function, combining stmt data ref gathering and fatal analysis
	parts.
	(vect_analyze_data_refs): Remove now redudnant code and simplify.
	* tree-vect-loop.c (vect_get_datarefs_in_loop): Factor out from
	vect_analyze_loop_2 and use vect_find_stmt_data_reference.
	* tree-vect-slp.c (vect_slp_bb): Use vect_find_stmt_data_reference.
	* tree-vectorizer.h (vect_find_stmt_data_reference): Declare.

2018-05-25  Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/85720
	* tree-loop-distribution.c (break_alias_scc_partitions): Don't merge
	SCC if all partitions are builtins.
	(version_loop_by_alias_check): New parameter.  Generate cancelable
	runtime alias check if all partitions are builtins.
	(distribute_loop): Update call to above function.

2018-05-25  Bin Cheng  <bin.cheng@arm.com>

	* tree-outof-ssa.c (tree-ssa.h, tree-dfa.h): Include header files.
	(create_default_def, for_all_parms): Moved from tree-ssa-coalesce.c.
	(parm_default_def_partition_arg): Ditto.
	(set_parm_default_def_partition): Ditto.
	(get_parm_default_def_partitions): Ditto and make it static.
	(get_undefined_value_partitions): Ditto and make it static.
	(remove_ssa_form): Refactor call to init_var_map here.
	* tree-ssa-coalesce.c (build_ssa_conflict_graph): Support live range
	computation for loop region.
	(coalesce_partitions, compute_optimized_partition_bases): Ditto.
	(register_default_def): Delete.
	(for_all_parms, create_default_def): Move to tree-outof-ssa.c.
	(parm_default_def_partition_arg): Ditto.
	(set_parm_default_def_partition): Ditto.
	(get_parm_default_def_partitions): Ditto and make it static.
	(get_undefined_value_partitions): Ditto and make it static.
	(coalesce_with_default, coalesce_with_default): Update comment.
	(create_coalesce_list_for_region): New func factored out from
	create_outofssa_var_map.
	(populate_coalesce_list_for_outofssa): New func factored out from
	create_outofssa_var_map and coalesce_ssa_name.
	(create_outofssa_var_map): Delete.
	(coalesce_ssa_name): Refactor to support live range computation.
	* tree-ssa-coalesce.h (coalesce_ssa_name): Change decl.
	(get_parm_default_def_partitions): Delete.
	(get_undefined_value_partitions): Ditto.
	* tree-ssa-live.c (init_var_map, delete_var_map): Support live range
	computation for loop region.
	(new_tree_live_info, loe_visit_block): Ditto.
	(live_worklist, set_var_live_on_entry): Ditto.
	(calculate_live_on_exit, verify_live_on_entry): Ditto.
	* tree-ssa-live.h (struct _var_map): New fields.
	(init_var_map): Change decl.
	(region_contains_p): New.

2018-05-25  Bin Cheng  <bin.cheng@arm.com>

	* tree-ssa-live.h (live_merge_and_clear): Delete.

2018-05-25  Richard Biener  <rguenther@suse.de>

	PR c++/85912
	* tree-dump.c (dequeue_and_dump): Remove access to removed
	operand 2 of a SWITCH_EXPR.

2018-05-25  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/sourcebuild.texi (vect_double_cond_arith): Include
	multiplication and division.
	* doc/md.texi (cond_mul@var{m}, cond_div@var{m}, cond_mod@var{m})
	(cond_udiv@var{m}, cond_umod@var{m}): Document.
	* optabs.def (cond_smul_optab, cond_sdiv_optab, cond_smod_optab)
	(cond_udiv_optab, cond_umod_optab): New optabs.
	* internal-fn.def (IFN_COND_MUL, IFN_COND_DIV, IFN_COND_MOD)
	(IFN_COND_RDIV): New internal functions.
	* internal-fn.c (get_conditional_internal_fn): Handle TRUNC_DIV_EXPR,
	TRUNC_MOD_EXPR and RDIV_EXPR.
	* match.pd (UNCOND_BINARY, COND_BINARY): Handle them.
	* config/aarch64/iterators.md (UNSPEC_COND_MUL, UNSPEC_COND_DIV):
	New unspecs.
	(SVE_INT_BINARY): Include mult.
	(SVE_COND_FP_BINARY): Include UNSPEC_MUL and UNSPEC_DIV.
	(optab, sve_int_op): Handle mult.
	(optab, sve_fp_op, commutative): Handle UNSPEC_COND_MUL and
	UNSPEC_COND_DIV.
	* config/aarch64/aarch64-sve.md (cond_<optab><mode>): New pattern
	for SVE_INT_BINARY_SD.

2018-05-25  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/iterators.md (SVE_INT_BINARY_SD): New code iterator.
	(optab, sve_int_op): Handle div and udiv.
	* config/aarch64/aarch64-sve.md (<optab><mode>3): New expander
	for SVE_INT_BINARY_SD.
	(*<optab><mode>3): New insn for the same.

2018-05-25  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-patterns.c: Include predict.h.
	(vect_recog_divmod_pattern): Restrict check for division support
	to when optimizing for size.

2018-05-25  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/sourcebuild.texi (vect_double_cond_arith: Document.
	* gimple-match.h (gimple_match_op::MAX_NUM_OPS): Bump to 4.
	(gimple_match_op::gimple_match_op): Add an overload for 4 operands.
	(gimple_match_op::set_op): Likewise.
	(gimple_resimplify4): Declare.
	* genmatch.c (get_operand_type): Handle CFN_COND_* functions.
	(expr::gen_transform): Likewise.
	(decision_tree::gen): Generate a simplification routine for 4 operands.
	* gimple-match-head.c (gimple_simplify): Add an overload for
	4 operands.  In the top-level function, handle up to 4 call
	arguments and call gimple_resimplify4.
	(gimple_resimplify4): New function.
	(build_call_internal): Pass a fourth operand.
	(maybe_push_to_seq): Likewise.
	* match.pd (UNCOND_BINARY, COND_BINARY): New operator lists.
	Fold VEC_COND_EXPRs of an operation and a default value into
	an IFN_COND_* function if possible.
	* config/aarch64/iterators.md (UNSPEC_COND_MAX, UNSPEC_COND_MIN):
	New unspecs.
	(SVE_COND_FP_BINARY): Include them.
	(optab, sve_fp_op): Handle them.
	(SVE_INT_BINARY_REV): New code iterator.
	(SVE_COND_FP_BINARY_REV): New int iterator.
	(commutative): New int attribute.
	* config/aarch64/aarch64-protos.h (aarch64_sve_prepare_conditional_op):
	Declare.
	* config/aarch64/aarch64.c (aarch64_sve_prepare_conditional_op): New
	function.
	* config/aarch64/aarch64-sve.md (cond_<optab><mode>): Use it.
	(*cond_<optab><mode>): New patterns for reversed operands.

2018-05-25  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (STMT_VINFO_GROUP_*, GROUP_*): Remove.
	(DR_GROUP_*): New, assert we have non-NULL ->data_ref_info.
	(REDUC_GROUP_*): New, assert we have NULL ->data_ref_info.
	(STMT_VINFO_GROUPED_ACCESS): Adjust.
	* tree-vect-data-refs.c (everywhere): Adjust users.
	* tree-vect-loop.c (everywhere): Likewise.
	* tree-vect-slp.c (everywhere): Likewise.
	* tree-vect-stmts.c (everywhere): Likewise.
	* tree-vect-patterns.c (vect_reassociating_reduction_p): Likewise.

2018-05-25  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* configure.ac (gcc_cv_as_section_has_e): Move to common section.
	Rename to...
	(gcc_cv_as_section_exclude): ... this.
	Try Solaris as #exclude syntax.
	* configure: Regenerate.
	* config.in: Regenerate.
	* config/i386/i386.c (i386_solaris_elf_named_section): Handle
	SECTION_EXCLUDE.
	* config/sparc/sparc.c (sparc_solaris_elf_asm_named_section)
	[HAVE_GAS_SECTION_EXCLUDE]: Handle SECTION_EXCLUDE.

	* varasm.c (default_elf_asm_named_section): Don't check if
	HAVE_GAS_SECTION_EXCLUDE is defined.

2018-05-25  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/md.texi: Update the documentation of the cond_* optabs
	to mention the new final operand.  Fix GET_MODE_NUNITS call.
	Describe the scalar case too.
	* internal-fn.def (IFN_EXTRACT_LAST): Change type to fold_left.
	* internal-fn.c (expand_cond_unary_optab_fn): Expect 3 operands
	instead of 2.
	(expand_cond_binary_optab_fn): Expect 4 operands instead of 3.
	(get_conditional_internal_fn): Update comment.
	* tree-vect-loop.c (vectorizable_reduction): Pass the original
	accumulator value as a final argument to conditional functions.
	* config/aarch64/aarch64-sve.md (cond_<optab><mode>): Turn into
	a define_expand and add an "else" operand.  Assert for now that
	the else operand is equal to operand 2.  Use SVE_INT_BINARY and
	SVE_COND_FP_BINARY instead of SVE_COND_INT_OP and SVE_COND_FP_OP.
	(*cond_<optab><mode>): New patterns.
	* config/aarch64/iterators.md (UNSPEC_COND_SMAX, UNSPEC_COND_UMAX)
	(UNSPEC_COND_SMIN, UNSPEC_COND_UMIN, UNSPEC_COND_AND, UNSPEC_COND_ORR)
	(UNSPEC_COND_EOR): Delete.
	(optab): Remove associated mappings.
	(SVE_INT_BINARY): New code iterator.
	(sve_int_op): Remove int attribute and add "minus" to the code
	attribute.
	(SVE_COND_INT_OP): Delete.
	(SVE_COND_FP_OP): Rename to...
	(SVE_COND_FP_BINARY): ...this.

2018-05-25  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (can_reuse_operands_p): New function.
	(maybe_legitimize_operands): Try to reuse the results for
	earlier operands.

2018-05-24  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (cvtusi2<ssescalarmodesuffix>64<round_name>):
	Add {q} suffix to insn mnemonic.

2018-05-23  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (TARGET_WARN_FUNC_RETURN): Define.
	(msp430_warn_func_return): New.

2018-05-24  Roger Sayle  <roger@nextmovesoftware.com>

	* fold-const.c (tree_nonzero_bits): New function.
	* fold-const.h (tree_nonzero_bits): Likewise.
	* match.pd (POPCOUNT): New patterns to fold BUILTIN_POPCOUNT and
	friends.  POPCOUNT(x&1) => x&1, POPCOUNT(x)==0 => x==0, etc.

2018-05-24  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85900
	PR target/85345
	* varasm.c (assemble_alias): Check ifunc_resolver only on
	FUNCTION_DECL.

2018-05-24  Uros Bizjak  <ubizjak@gmail.com>

	PR target/85903
	* config/i386/sse.md (movdi_to_sse): Do not generate pseudo
	when memory input operand is handled.

2018-05-24  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64.c (qdf24xx_addrcost_table): New static
	global.
	(qdf24xx_tunings) <addr_costs>: Set to qdf24xx_addrcost_table.

2018-05-24  Richard Sandiford  <richard.sandiford@linaro.org>

	* match.pd: Delay FMA folds until after vectorization.

2018-05-24  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/83009
	* config/aarch64/predicates.md (aarch64_mem_pair_lanes_operand): Make
	address check not strict.

2018-05-24  Richard Sandiford  <richard.sandiford@linaro.org>

	* gimple-match.h (gimple_match_op): New class.
	(mprts_hook): Replace parameters with a gimple_match_op *.
	(maybe_build_generic_op): Likewise.
	(gimple_simplified_result_is_gimple_val): Replace parameters with
	a const gimple_match_op *.
	(gimple_simplify): Replace code_helper * and tree * parameters with
	a gimple_match_op * parameter.
	(gimple_resimplify1): Replace code_helper *, tree and tree *
	parameters with a gimple_match_op * parameter.
	(gimple_resimplify2): Likewise.
	(gimple_resimplify3): Likewise.
	(maybe_push_res_to_seq): Replace code_helper, tree and tree *
	parameters with a gimple_match_op * parameter.
	* gimple-match-head.c (gimple_simplify): Change prototypes of
	auto-generated functions to take a gimple_match_op * instead of
	separate code_helper * and tree * parameters.  Make the same
	change in the top-level overload and update calls to the
	gimple_resimplify routines.  Update calls to the auto-generated
	functions and to maybe_push_res_to_seq in the publicly-facing
	operation-specific gimple_simplify overloads.
	(gimple_match_op::MAX_NUM_OPS): Define.
	(gimple_resimplify1): Replace rcode and ops with a single res_op
	parameter.  Update call to gimple_simplify.
	(gimple_resimplify2): Likewise.
	(gimple_resimplify3): Likewise.
	(mprts_hook): Replace parameters with a gimple_match_op *.
	(maybe_build_generic_op): Likewise.
	(build_call_internal): Replace type, nargs and ops with
	a gimple_match_op *.
	(maybe_push_res_to_seq): Replace res_code, type and ops parameters
	with a single gimple_match_op *.  Update calls to mprts_hook,
	build_call_internal and gimple_simplified_result_is_gimple_val.
	Factor out code that is common to the tree_code and combined_fn cases.
	* genmatch.c (expr::gen_transform): Replace tem_code and
	tem_ops with a gimple_match_op called tem_op.  Update calls
	to the gimple_resimplify functions and maybe_push_res_to_seq.
	(dt_simplify::gen_1): Manipulate res_op instead of res_code and
	res_ops.  Update call to the gimple_resimplify functions.
	(dt_simplify::gen): Pass res_op instead of res_code and res_ops.
	(decision_tree::gen): Make the functions take a gimple_match_op *
	called res_op instead of separate res_code and res_ops parameters.
	Update call accordingly.
	* gimple-fold.c (replace_stmt_with_simplification): Replace rcode
	and ops with a single res_op parameter.  Update calls to
	maybe_build_generic_op and maybe_push_res_to_seq.
	(fold_stmt_1): Update calls to gimple_simplify and
	replace_stmt_with_simplification.
	(gimple_fold_stmt_to_constant_1): Update calls to gimple_simplify
	and gimple_simplified_result_is_gimple_val.
	* tree-cfgcleanup.c (cleanup_control_expr_graph): Update call to
	gimple_simplify.
	* tree-ssa-sccvn.c (vn_lookup_simplify_result): Replace parameters
	with a gimple_match_op *.
	(vn_nary_build_or_lookup): Likewise.  Update call to
	vn_nary_build_or_lookup_1.
	(vn_nary_build_or_lookup_1): Replace rcode, type and ops with a
	gimple_match_op *.  Update calls to the gimple_resimplify routines
	and to gimple_simplified_result_is_gimple_val.
	(vn_nary_simplify): Update call to vn_nary_build_or_lookup_1.
	Use gimple_match_op::MAX_NUM_OPS instead of a hard-coded 3.
	(vn_reference_lookup_3): Update call to vn_nary_build_or_lookup.
	(visit_nary_op): Likewise.
	(visit_reference_op_load): Likewise.

2018-05-23  Luis Machado  <luis.machado@linaro.org>

	* tree-ssa-loop-prefetch.c (should_issue_prefetch_p): Use correct type
	modifier for printing the step amount.

2018-05-23  Jozef Lawrynowicz  <jozef.l@somniumtech.com>

	PR target/78849
	* tree.c (build_common_tree_nodes): Dont set TYPE_SIZE for __intN
	types.

2018-05-23  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/sourcebuild.texi (Endianness): New subsubsection.

2018-05-23  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64-protos.h (cpu_prefetch_tune)
	<prefetch_dynamic_strides>: New const bool field.
	* config/aarch64/aarch64.c (generic_prefetch_tune): Update to include
	prefetch_dynamic_strides.
	(exynosm1_prefetch_tune): Likewise.
	(thunderxt88_prefetch_tune): Likewise.
	(thunderx_prefetch_tune): Likewise.
	(thunderx2t99_prefetch_tune): Likewise.
	(qdf24xx_prefetch_tune): Likewise. Set prefetch_dynamic_strides to
	false.
	(aarch64_override_options_internal): Update to set
	PARAM_PREFETCH_DYNAMIC_STRIDES.
	* doc/invoke.texi (prefetch-dynamic-strides): Document new option.
	* params.def (PARAM_PREFETCH_DYNAMIC_STRIDES): New.
	* params.h (PARAM_PREFETCH_DYNAMIC_STRIDES): Define.
	* tree-ssa-loop-prefetch.c (should_issue_prefetch_p): Account for
	prefetch-dynamic-strides setting.

2018-05-23  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64-protos.h (cpu_prefetch_tune)
	<minimum_stride>: New const int field.
	* config/aarch64/aarch64.c (generic_prefetch_tune): Update to include
	minimum_stride field defaulting to -1.
	(exynosm1_prefetch_tune): Likewise.
	(thunderxt88_prefetch_tune): Likewise.
	(thunderx_prefetch_tune): Likewise.
	(thunderx2t99_prefetch_tune): Likewise.
	(qdf24xx_prefetch_tune) <minimum_stride>: Set to 2048.
	<default_opt_level>: Set to 3.
	(aarch64_override_options_internal): Update to set
	PARAM_PREFETCH_MINIMUM_STRIDE.
	* doc/invoke.texi (prefetch-minimum-stride): Document new option.
	* params.def (PARAM_PREFETCH_MINIMUM_STRIDE): New.
	* params.h (PARAM_PREFETCH_MINIMUM_STRIDE): Define.
	* tree-ssa-loop-prefetch.c (should_issue_prefetch_p): Return false if
	stride is constant and is below the minimum stride threshold.

2018-05-23  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (mode26): Delete.
	(armv4): Delete mode26 reference.
	* config/arm/arm.c (arm_configure_build_target): Delete use of
	isa_bit_mode26.

2018-05-23  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*floatuns<SWI48:mode><MODEF:mode>2_avx512):
	New insn pattern.
	(floatunssi<mode>2): Also enable for AVX512F and TARGET_SSE_MATH.
	Rewrite expander pattern.  Emit gen_floatunssi<mode>2_i387_with_xmm
	for non-SSE modes.
	(floatunsdisf2): Rewrite expander pattern.  Hanlde TARGET_AVX512F.
	(floatunsdidf2): Ditto.

2018-05-23  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (fixuns_trunc<mode>di2): New insn pattern.
	(fixuns_trunc<mode>si2_avx512f): Ditto.
	(*fixuns_trunc<mode>si2_avx512f_zext): Ditto.
	(fixuns_trunc<mode>si2): Also enable for AVX512F and TARGET_SSE_MATH.
	Emit fixuns_trunc<mode>si2_avx512f for AVX512F targets.

2018-05-23  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/79985
	* df-scan.c (df_insn_refs_collect): Remove special case for
	global registers and asm statements.

2018-05-23  Alexander Monakov  <amonakov@ispras.ru>

	* extend.texi (Global Register Variables): Rewrite the bullet list.
	Note that the register is available for allocation. Note that access
	via inline asm must use constraints. Add note about async-signal
	handlers. Remove paragraph about automagic register selection.

2018-05-23  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Remove restriction
	of fixed offset from memset VN.

2018-05-23  Bill Schmidt  <wschmidt@linux.ibm.com>

	* gimple-ssa-strength-reduction.c (struct slsr_cand_d): Add
	first_interp field.
	(alloc_cand_and_find_basis): Initialize first_interp field.
	(slsr_process_mul): Modify first_interp field.
	(slsr_process_add): Likewise.
	(slsr_process_cast): Modify first_interp field for each new
	interpretation.
	(slsr_process_copy): Likewise.
	(dump_candidate): Dump first_interp field.
	(replace_mult_candidate): Process all interpretations, not just
	subsequent ones.
	(replace_rhs_if_not_dup): Likewise.
	(replace_one_candidate): Likewise.

2018-05-23  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (aarch64_use_frame_pointer):
	Add new boolean.
	(aarch64_needs_frame_chain): New function.
	(aarch64_parse_override_string): Set aarch64_use_frame_pointer.

2018-05-23  Sudakshina Das  <sudi.das@arm.com>

	PR target/84882
	* common/config/aarch64/aarch64-common.c (aarch64_handle_option):
	Check val before adding MASK_STRICT_ALIGN to opts->x_target_flags.
	* config/aarch64/aarch64.opt (mstrict-align): Remove RejectNegative.
	* config/aarch64/aarch64.c (aarch64_attributes): Mark allow_neg
	as true for strict-align.
	(aarch64_can_inline_p): Perform checks even when callee has no
	attributes to check for strict alignment.
	* doc/extend.texi (AArch64 Function Attributes): Document
	no-strict-align.
	* doc/invoke.texi: (AArch64 Options): Likewise.

2018-05-23  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/85853
	* tree-vect-slp.c (vect_slp_analyze_node_operations): Split out
	the handling of the root of the node to...
	(vect_slp_analyze_node_operations_1): ...this new function,
	and run the whole thing with the child nodes' def types
	set according to their SLP node's def type.

2018-05-23  Richard Biener  <rguenther@suse.de>

	PR middle-end/85874
	* tree-data-ref.c (create_runtime_alias_checks): Defer
	and ignore overflow warnings.

2018-05-23  Yury Gribov  <tetra2005@gmail.com>

	PR tree-optimization/85822
	* tree-vrp.c (is_masked_range_test): Fix handling of negative
	constants.

2018-05-23  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Handle arbitrary
	memset constants via native_interpret_expr.

2018-05-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85345
	* cgraph.h (cgraph_node::create): Set ifunc_resolver for ifunc
	attribute.
	(cgraph_node::create_alias): Likewise.
	(cgraph_node::get_availability): Check ifunc_resolver instead
	of looking up ifunc attribute.
	* cgraphunit.c (maybe_diag_incompatible_alias): Likewise.
	* varasm.c (do_assemble_alias): Likewise.
	(assemble_alias): Likewise.
	(default_binds_local_p_3): Likewise.
	* cgraph.h (cgraph_node): Add ifunc_resolver.
	(cgraph_node::only_called_directly_or_aliased_p): Return false
	for IFUNC resolver.
	* lto-cgraph.c (input_node): Set ifunc_resolver for ifunc
	attribute.
	* symtab.c (symtab_node::verify_base): Verify that ifunc_resolver
	is equivalent to lookup_attribute ("ifunc", DECL_ATTRIBUTES (decl)).
	(symtab_node::binds_to_current_def_p): Check ifunc_resolver
	instead of looking up ifunc attribute.

2018-05-22  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64.md (*ashift<mode>_extv_bfiz): New pattern.

2018-05-22  Martin Sebor  <msebor@redhat.com>

	PR middle-end/85359
	* builtins.c (expand_builtin_strcpy): Call maybe_warn_nonstring_arg
	only when expasion succeeds.
	(expand_builtin_strcmp): Same.
	(expand_builtin_strncmp): Same.

2018-05-22  Martin Sebor  <msebor@redhat.com>

	* calls.c (maybe_warn_nonstring_arg): Fix a typo in a comment.

2018-05-22  Jackson Woodruff  <jackson.woodruff@arm.com>
	    Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-ldpstp.md: Replace uses of
	aarch64_mem_pair_operand with memory_operand and delete operand swapping
	code.
	* config/aarch64/aarch64.c (aarch64_operands_ok_for_ldpstp):
	Add check for legitimate_address.
	(aarch64_gen_adjusted_ldpstp): Swap operands where appropriate.
	(aarch64_swap_ldrstr_operands): New.
	* config/aarch64/aarch64-protos.h (aarch64_swap_ldrstr_operands):
	Define prototype.

2018-05-22  Jackson Woodruff  <jackson.woodruff@arm.com>
	    Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.md: New patterns to generate stp
	and ldp.
	(store_pair_sw, store_pair_dw): New patterns to generate stp for
	single words and double words.
	(load_pair_sw, load_pair_dw): Likewise.
	(store_pair_sf, store_pair_df, store_pair_si, store_pair_di):
	Delete.
	(load_pair_sf, load_pair_df, load_pair_si, load_pair_di):
	Delete.
	* config/aarch64/aarch64-ldpstp.md: Modify peephole
	for different mode ldpstp and add peephole for merged zero stores.
	Likewise for loads.
	* config/aarch64/aarch64.c (aarch64_operands_ok_for_ldpstp):
	Add size check.
	(aarch64_gen_store_pair): Rename calls to match new patterns.
	(aarch64_gen_load_pair): Rename calls to match new patterns.
	* config/aarch64/aarch64-simd.md (load_pair<mode>): Rename to...
	(load_pair<DREG:mode><DREG2:mode>): ... This.
	(store_pair<mode>): Rename to...
	(vec_store_pair<DREG:mode><DREG2:mode>): ... This.
	* config/aarch64/iterators.md (DREG, DREG2, DX2, SX, SX2, DSX):
	New mode iterators.
	(V_INT_EQUIV): Handle SImode.
	* config/aarch64/predicates.md (aarch64_reg_zero_or_fp_zero):
	New predicate.

2018-05-22  Martin Sebor  <msebor@redhat.com>

	PR c/85623
	* calls.c (maybe_warn_nonstring_arg): Use string length to set
	or ajust the presumed bound on an operation to avoid unnecessary
	warnings.

2018-05-22  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/85826
	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): Avoid
	assuming that a DECL necesarily has a constant size.

2018-05-22  Richard Sandiford  <richard.sandiford@linaro.org>

	PR middle-end/85862
	* internal-fn.c (expand_direct_optab_fn): Cope with a null lhs.

2018-05-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85834
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Properly handle
	non-constant and non-zero memset arguments.

2018-05-22  Martin Liska  <mliska@suse.cz>

	PR ipa/85607
	* ipa-icf.c (sem_item::add_type): Do not ICE for incomplete types.

2018-05-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85863
	* tree-vect-stmts.c (vect_is_simple_cond): Only widen invariant
	comparisons when vectype is specified.
	(vectorizable_condition): Do not specify vectype for
	vect_is_simple_cond when SLP vectorizing.

2018-05-21  Michael Meissner  <meissner@linux.ibm.com>

	PR target/85657
	* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Do not
	define __ibm128 as long double.
	* config/rs6000/rs6000.c (rs6000_init_builtins): Create __ibm128
	as a distinct type when IEEE 128-bit support is enabled.
	(init_float128_ieee): Fix up conversions between IFmode and IEEE
	128-bit types to use the correct functions.
	(rs6000_expand_float128_convert): Use explicit FLOAT_EXTEND to
	convert between 128-bit floating point types that have different
	modes but the same representation, instead of using gen_lowpart to
	makean alias.
	* config/rs6000/rs6000.md (IFKF): New iterator for IFmode and
	KFmode.
	(IFKF_reg): New attributes to give the register constraints for
	IFmode and KFmode.
	(extend<mode>tf2_internal): New insns to mark an explicit
	conversion between 128-bit floating point types that have a
	different mode but share the same representation.

2018-05-21  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/85814
	* tree-ssa-strlen.c (get_stridx_plus_constant): Cope with
	a null return from get_strinfo when unsharing the next
	strinfo in the chain.

2018-05-21  Vladimir Mezentsev  <vladimir.mezentsev@oracle.com>

	PR gcc/84923
	* varasm.c (weak_finish): Clean up weak_decls.

2018-05-21  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.md ("unspec"): Define UNSPEC_SABAL,
	UNSPEC_SABDL2, UNSPEC_SADALP, UNSPEC_UABAL, UNSPEC_UABDL2,
	UNSPEC_UADALP values.
	* config/aarch64/iterators.md (ABAL): New int iterator.
	(ABDL2): Likewise.
	(ADALP): Likewise.
	(sur): Add mappings for the above.
	* config/aarch64/aarch64-simd.md (aarch64_<sur>abdl2<mode>_3):
	New define_insn.
	(aarch64_<sur>abal<mode>_4): Likewise.
	(aarch64_<sur>adalp<mode>_3): Likewise.
	(<sur>sadv16qi): New define_expand.

2018-05-21  Alexander Nesterovskiy  <alexander.nesterovskiy@intel.com>

	* config/i386/i386.md (*movsf_internal): AVX falsedep fix.
	(*movdf_internal): Ditto.
	(*rcpsf2_sse): Ditto.
	(*rsqrtsf2_sse): Ditto.
	(*sqrt<mode>2_sse): Ditto.

2018-05-21  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-simd.md (aarch64_eor3qv8hi): Change to
	eor3q<mode>4.
	(aarch64_bcaxqv8hi): Change to bcaxq<mode>4.
	* config/aarch64/aarch64-simd-builtins.def (veor3q_u8, veor3q_u32,
	veor3q_u64, veor3q_s8, veor3q_s16, veor3q_s32, veor3q_s64, vbcaxq_u8,
	vbcaxq_u32, vbcaxq_u64, vbcaxq_s8, vbcaxq_s16, vbcaxq_s32,
	vbcaxq_s64): New.
	* config/aarch64/arm_neon.h: Likewise.
	* config/aarch64/iterators.md (VQ_I): New.

2018-05-21  Alexey Brodkin <abrodkin@synopsys.com>

	* config.gcc: Add arc/t-multilib-linux to tmake_file for
	arc*-*-linux*.
	* config/arc/t-multilib-linux: Specify MULTILIB_OPTIONS and
	MULTILIB_DIRNAMES

2018-05-20  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constraints.md (S): New constraint.
	* config/nds32/nds32.md (call_internal): Use constraint S.
	(call_value_internal): Likewise.
	(sibcall_internal): Likewise.
	(sibcall_value_internal): Likewise.

2018-05-20  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_register_move_cost): Take garywolf cpu
	into consideration.

2018-05-20  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-cost.c (rtx_cost_model_t): New structure.
	(insn_size_16bit, insn_size_32bit): New variables for cost evaluation.
	(nds32_rtx_costs_impl): Simplify.
	(nds32_address_cost_impl): Simplify.
	(nds32_init_rtx_costs): New function.
	(nds32_rtx_costs_speed_prefer): Likewise.
	(nds32_rtx_costs_size_prefer): Likewise.
	(nds32_address_cost_speed_prefer): Likewise.
	(nds32_address_cost_speed_fwprop): Likewise.
	(nds32_address_cost_size_prefer): Likewise.
	* config/nds32/nds32-protos.h (nds32_init_rtx_costs): Declare.
	* config/nds32/nds32.c (nds32_option_override): Use
	nds32_init_rtx_costs function.

2018-05-20  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_asm_file_start): Output pipeline model.
	* config/nds32/nds32.h (TARGET_PIPELINE_N7): Define.
	(TARGET_PIPELINE_N8): Likewise.
	(TARGET_PIPELINE_N10): Likewise.
	(TARGET_PIPELINE_N13): Likewise.
	(TARGET_PIPELINE_GRAYWOLF): Likewise.

2018-05-19  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/nds32-fpu.md: Update copyright year.

2018-05-19  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (ASM_SPEC): Adjust spec rule.

2018-05-19  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c
	(nds32_md_asm_adjust): Consider flag_inline_asm_r15 variable.
	* config/nds32/nds32.opt (minline-asm-r15): New option.

2018-05-19  Chung-Ju Wu  <jasonwucj@gmail.com>

	* common/config/nds32/nds32-common.c (TARGET_DEFAULT_TARGET_FLAGS): Add
	MASK_HW_ABS.
	* config/nds32/nds32.md (abssi2): New pattern.

2018-05-19  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (rex64namesuffix): New mode attribute.
	* config/i386/sse.md (sse_cvtsi2ss<rex64namesuffix><round_name>):
	Merge insn pattern from sse_cvtsi2ss<round_name> and
	sse_cvtsi2ssq<round_name> using SWI48 mode iterator.
	(sse_cvtss2si<rex64namesuffix><round_name>): Merge insn pattern
	from sse_cvtss2si<round_name> and sse_cvtss2siq<round_name>
	using SWI48 mode iterator.
	(sse_cvtss2si<rex64namesuffix>_2): Merge insn pattern from
	sse_cvtss2si_2 and sse_cvtss2siq_2 using SWI48 mode iterator.
	(sse_cvttss2si<rex64namesuffix><round_saeonly_name>): Merge insn
	pattern from sse_cvttss2si<round_saeonly_name>
	and sse_cvttss2siq<round_saeonly_name> using SWI48 mode iterator.
	(avx512f_vcvtss2usi<rex64namesuffix><round_name>): Merge insn pattern
	from avx512f_vcvtss2usi<round_name> and avx512f_vcvtss2usiq<round_name>
	using SWI48 mode iterator.
	(avx512f_vcvttss2usi<rex64namesuffix><round_saeonly_name>): Merge
	insn pattern from avx512f_vcvttss2usi<round_saeonly_name> and
	avx512f_vcvttss2usiq<round_saeonly_name> using SWI48 mode iterator.
	(avx512f_vcvtsd2usi<rex64namesuffix><round_name>): Merge insn pattern
	from avx512f_vcvtsd2usi<round_name> and avx512f_vcvtsd2usiq<round_name>
	using SWI48 mode iterator.
	(avx512f_vcvttsd2usi<rex64namesuffix><round_saeonly_name>): Merge
	insn pattern from avx512f_vcvttsd2usi<round_saeonly_name> and
	avx512f_vcvttsd2usiq<round_saeonly_name> using SWI48 mode iterator.
	(sse2_cvtsd2si<rex64namesuffix><round_name>): Merge insn pattern from
	sse2_cvtsd2si<round_name> and sse2_cvtsd2siq<round_name> using
	SWI48 mode iterator.
	(sse2_cvtsd2si<rex64namesuffix>_2): Merge insn pattern from
	sse2_cvtsd2si_2 and sse2_cvtsd2siq_2 using SWI48 mode iterator.
	(sse_cvttsd2si<rex64namesuffix><round_saeonly_name>): Merge insn
	pattern from sse_cvttsd2si<round_saeonly_name>
	and sse_cvttsd2siq<round_saeonly_name> using SWI48 mode iterator.

2018-05-19  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-md-auxiliary.c
	(nds32_valid_smw_lwm_base_p): Refine.
	(nds32_output_smw_single_word): Refine.
	(nds32_output_smw_double_word): New.
	* config/nds32/nds32-protos.h (nds32_output_smw_double_word): New.

2018-05-19  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_output_stack_push): Refine.
	(nds32_output_stack_pop): Refine.
	(nds32_expand_unaligned_load): Refine.
	(nds32_expand_unaligned_store): Refine.

2018-05-19  Kuan-Lin Chen <kuanlinchentw@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constants.md: Add TP_REGNUM constant.
	(unspec_element): Add UNSPEC_GOTINIT, UNSPEC_GOT, UNSPEC_GOTOFF,
	UNSPEC_PLT, UNSPEC_TLSGD, UNSPEC_TLSLD, UNSPEC_TLSIE, UNSPEC_TLSLE and
	UNSPEC_ADD32.
	* config/nds32/nds32-doubleword.md: Consider flag_pic.
	* config/nds32/nds32-dspext.md (mov<mode>): Expand TLS and PIC cases.
	* config/nds32/nds32-predicates.c (nds32_const_unspec_p): New.
	* config/nds32/nds32-md-auxiliary.c: Implementation that support TLS
	and PIC code generation.
	* config/nds32/nds32-protos.h: Declarations that support TLS and PIC
	code generation.
	* config/nds32/nds32-relax-opt.c: Consider TLS and PIC for relax
	optimization.
	* config/nds32/nds32.md: Support TLS and PIC.
	* config/nds32/nds32.c: Support TLS and PIC.
	* config/nds32/nds32.h (nds32_relax_insn_type): New enum type.
	* config/nds32/predicates.md (nds32_nonunspec_symbolic_operand): New
	predicate.

2018-05-19  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-predicates.c (const_vector_to_hwint): Use machine
	mode with E_ prefix.

2018-05-19  Kuan-Lin Chen <kuanlinchentw@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constants.md (unspec_element): Add UNSPEC_ICT.
	* config/nds32/nds32-md-auxiliary.c
	(symbolic_reference_mentioned_p): New.
	(nds32_legitimize_ict_address): New.
	(nds32_expand_ict_move): New.
	(nds32_indirect_call_referenced_p): New.
	(nds32_symbol_binds_local_p): Delete.
	(nds32_long_call_p): Modify.
	* config/nds32/nds32-opts.h (nds32_ict_model_type): New enum type.
	* config/nds32/nds32-protos.h
	(symbolic_reference_mentioned_p): Declare.
	(nds32_legitimize_ict_address): Declare.
	(nds32_expand_ict_move): Declare.
	(nds32_indirect_call_referenced_p): Declare.
	* config/nds32/nds32-relax-opt.c (nds32_ict_const_p): New.
	(nds32_relax_group): Use nds32_ict_const_p as condition.
	* config/nds32/nds32.c (nds32_attribute_table): Add "indirect_call".
	(nds32_asm_file_start): Output ict_model directive in asm code.
	(nds32_legitimate_address_p): Consider indirect call.
	(nds32_print_operand): Consider indirect call.
	(nds32_print_operand_address): Consider indirect call.
	(nds32_insert_attributes): Handle "indirect_call" attribute.
	(TARGET_LEGITIMATE_ADDRESS_P): Define.
	(TARGET_LEGITIMATE_CONSTANT_P): Define.
	(TARGET_CANNOT_FORCE_CONST_MEM): Define.
	(TARGET_DELEGITIMIZE_ADDRESS): Define.
	(TARGET_ASM_OUTPUT_ADDR_CONST_EXTRA): Define.
	* config/nds32/nds32.h (SYMBOLIC_CONST_P): Define.
	(TARGET_ICT_MODEL_SMALL): Define.
	(TARGET_ICT_MODEL_LARGE): Define.
	* config/nds32/nds32.md (movsi): Consider ict model.
	(call, call_value): Consider ict model.
	(sibcall, sibcall_value): Consider ict model.
	* config/nds32/nds32.opt (mict-model): New option.
	* config/nds32/predicates.md (nds32_symbolic_operand): Consider ict
	model.

2018-05-18  Kito Cheng  <kito.cheng@gmail.com>
	    Monk Chiang  <sh.chiang04@gmail.com>
	    Jim Wilson <jimw@sifive.com>

	* common/config/riscv/riscv-common.c (riscv_parse_arch_string):
	Add support to parse rv32e*.  Clear MASK_RVE for rv32i and rv64i.
	* config.gcc (riscv*-*-*): Add support for rv32e* and ilp32e.
	* config/riscv/riscv-c.c (riscv_cpu_cpp_builtins): Define
	__riscv_32e when TARGET_RVE.  Handle ABI_ILP32E as soft-float ABI.
	* config/riscv/riscv-opts.h (riscv_abi_type): Add ABI_ILP32E.
	* config/riscv/riscv.c (riscv_compute_frame_info): When TARGET_RVE,
	compute save_libcall_adjustment properly.
	(riscv_option_override): Call error if TARGET_RVE and not ABI_ILP32E.
	(riscv_conditional_register_usage): Handle TARGET_RVE and ABI_ILP32E.
	* config/riscv/riscv.h (UNITS_PER_FP_ARG): Handle ABI_ILP32E.
	(STACK_BOUNDARY, ABI_STACK_BOUNDARY): Handle TARGET_RVE.
	(GP_REG_LAST, MAX_ARGS_IN_REGISTERS): Likewise.
	(ABI_SPEC): Handle mabi=ilp32e.
	* config/riscv/riscv.opt (abi_type): Add ABI_ILP32E.
	(RVE): Add RVE mask.
	* doc/invoke.texi (RISC-V options) <-mabi>: Add ilp32e info.
	<-march>: Add rv32e as an example.

2018-05-18  Marc Glisse  <marc.glisse@inria.fr>

	PR c++/82899
	* tree-ssa-structalias.c (create_variable_info_for_1): Extra argument.
	(intra_create_variable_infos): Handle C++ constructors.

2018-05-18  Martin Liska  <mliska@suse.cz>

	* passes.def: Remove a redundant pass.

2018-05-18  Eric Botcazou  <ebotcazou@adacore.com>

	PR bootstrap/85838
	* config/sparc/sparc.c (sparc_expand_builtin): Always initialize op[0].

2018-05-18  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (armv3m, mode32): Delete features.
	(ARMv4): Update.
	(ARMv2, ARMv3, ARMv3m): Delete fgroups.
	(ARMv6m): Update.
	(armv2, armv2a, armv3, armv3m): Delete architectures.
	(arm2, arm250, arm3, arm6, arm60, arm600, arm610, arm620,
	arm7, arm7d, arm7di, arm70, arm700, arm700i, arm710, arm720,
	arm710c, arm7100, arm7500, arm7500fe, arm7m, arm7dm, arm7dmi):
	Delete cpus.
	* config/arm/arm.md (maddsidi4): Remove check for arm_arch3m.
	(*mulsidi3adddi): Likewise.
	(mulsidi3): Likewise.
	(*mulsidi3_nov6): Likewise.
	(umulsidi3): Likewise.
	(umulsidi3_nov6): Likewise.
	(umaddsidi4): Likewise.
	(*umulsidi3adddi): Likewise.
	(smulsi3_highpart): Likewise.
	(*smulsi3_highpart_nov6): Likewise.
	(umulsi3_highpart): Likewise.
	(*umulsi3_highpart_nov6): Likewise.
	* config/arm/arm.h (arm_arch3m): Delete.
	* config/arm/arm.c (arm_arch3m): Delete.
	(arm_option_override_internal): Update armv3-related comment.
	(arm_configure_build_target): Delete use of isa_bit_mode32.
	(arm_option_reconfigure_globals): Delete set of arm_ach3m.
	(arm_rtx_costs_internal): Delete check of arm_arch3m.
	* config/arm/arm-fixed.md (mulsq3): Delete check for arm_arch3m.
	(mulsa3): Likewise.
	(mulusa3): Likewise.
	* config/arm/arm-protos.h (arm_arch3m): Delete.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Likewise.
	* config/arm/t-arm-elf (all_early_nofp): Delete mentions of
	deleted architectures.

2018-05-18  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (armv5, armv5e): Delete features.
	(armv5t, armv5te): New features.
	(ARMv5, ARMv5e): Delete fgroups.
	(ARMv5t, ARMv5te): Adjust for above changes.
	(ARMv6m): Likewise.
	(armv5, armv5e): Delete arches.
	* config/arm/arm.md (*call_reg_armv5): Use arm_arch5t instead of
	arm_arch5.
	(*call_reg_arm): Likewise.
	(*call_value_reg_armv5): Likewise.
	(*call_value_reg_arm): Likewise.
	(*call_symbol): Likewise.
	(*call_value_symbol): Likewise.
	(*sibcall_insn): Likewise.
	(*sibcall_value_insn): Likewise.
	(clzsi2): Likewise.
	(prefetch): Likewise.
	(define_split and define_peephole2 dependent on arm_arch5):
	Likewise.
	* config/arm/arm.h (TARGET_LDRD): Use arm_arch5te instead of
	arm_arch5e.
	(TARGET_ARM_QBIT): Likewise.
	(TARGET_DSP_MULTIPLY): Likewise.
	(enum base_architecture): Delete BASE_ARCH_5, BASE_ARCH_5E.
	(arm_arch5, arm_arch5e): Delete.
	(arm_arch5t, arm_arch5te): Declare.
	* config/arm/arm.c (arm_arch5, arm_arch5e): Delete.
	(arm_arch5t): Declare.
	(arm_option_reconfigure_globals): Update for the above.
	(arm_options_perform_arch_sanity_checks): Update comment, replace
	use of arm_arch5 with arm_arch5t.
	(use_return_insn): Likewise.
	(arm_emit_call_insn): Likewise.
	(output_return_instruction): Likewise.
	(arm_final_prescan_insn): Likewise.
	(arm_coproc_builtin_available): Likewise.
	* config/arm/arm-c.c (arm_cpu_builtins): Replace arm_arch5 and
	arm_arch5e with arm_arch5t and arm_arch5te.
	* config/arm/arm-protos.h (arm_arch5, arm_arch5e): Delete.
	(arm_arch5t, arm_arch5te): Declare.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/t-arm-elf: Remove references to armv5, armv5e.
	* config/arm/t-multilib: Likewise.
	* config/arm/thumb1.md (*call_reg_thumb1_v5): Check arm_arch5t
	instead of arm_arch5.
	(*call_reg_thumb1): Likewise.
	(*call_value_reg_thumb1_v5): Likewise.
	(*call_value_reg_thumb1): Likewise.
	* config/arm/vxworks.h (TARGET_OS_CPP_BUILTINS): Remove now
	unreachable path.
	* doc/invoke.texi (ARM Options): Remove references to armv5, armv5e.

2018-05-18  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84846
	* doc/gcov.texi: Document -t option of gcov tool.

2018-05-18  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84846
	* gcov.c (print_usage): Add new -t option.
	(process_args): Handle the option.
	(generate_results): Use stdout as output when requested by
	the option.

2018-05-18  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84846
	* coverage.c (coverage_init): Write PWD to .gcno file.
	* doc/gcov.texi: Document how working directory is printed.
	* gcov-dump.c (dump_gcov_file): Print PWD.
	* gcov.c (output_intermediate_file): Likewise.
	(read_graph_file): Read PWD string.
	(output_lines): Print PWD.

2018-05-18  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR middle-end/85817
	* ipa-pure-const.c (malloc_candidate_p): Remove the check integer_zerop
	for retval and return false if all args to phi are zero.

2018-05-18  Richard Biener  <rguenther@suse.de>

	* gimple-ssa-evrp.c (class evrp_folder): Add simplify_stmt_using_ranges
	method.
	(evrp_dom_walker::before_dom_children): Call it.

2018-05-18  Richard Biener  <rguenther@suse.de>

	* tree-dfa.c (get_ref_base_and_extent): Use range-info to refine
	results when processing array refs with variable index.

2018-05-18  Toon Moene  <toon@moene.org>

	* doc/invoke.texi: Move -floop-unroll-and-jam documentation
	directly after that of -floop-interchange. Indicate that both
	options are enabled by default when specifying -O3.

2018-05-18  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-simd.md (vec_set<mode>): Use VALL_F16 mode
	iterator.  Delete separate integer-mode vec_set<mode> expander.
	(aarch64_simd_vec_setv2di): Delete.
	(vec_setv2di): Delete.
	(aarch64_simd_vec_set<mode>): Delete all other patterns with that name.
	Use VALL_F16 mode iterator.  Add LD1 alternative and use vwcore for
	the "w, r" alternative.

2018-05-18  Martin Liska  <mliska@suse.cz>

	* passes.def: Add pass_lower_switch and pass_lower_switch_O0.
	* tree-pass.h (make_pass_lower_switch_O0): New function.
	* tree-switch-conversion.c (node_has_low_bound): Remove.
	(node_has_high_bound): Likewise.
	(node_is_bounded): Likewise.
	(class pass_lower_switch): Make it a template type and create
	two instances.
	(pass_lower_switch::execute): Add template argument.
	(make_pass_lower_switch): New function.
	(make_pass_lower_switch_O0): New function.
	(do_jump_if_equal): Remove.
	(emit_case_nodes): Simplify to just handle all 3 cases and leave
	all the hard work to tree optimization passes.

2018-05-18  Martin Liska  <mliska@suse.cz>

	* dbgcnt.c (limit_low): Renamed from limit.
	(limit_high): New variable.
	(dbg_cnt_is_enabled): Check for upper limit.
	(dbg_cnt): Adjust dumping.
	(dbg_cnt_set_limit_by_index): Add new argument for high
	value.
	(dbg_cnt_set_limit_by_name): Likewise.
	(dbg_cnt_process_single_pair): Parse new format.
	(dbg_cnt_process_opt): Use strtok.
	(dbg_cnt_list_all_counters): Remove 'value' and add
	'limit_high'.
	* doc/invoke.texi: Document changes.

2018-05-18  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/sourcebuild.texi (scalar_all_fma): Document.
	* tree.def (FMA_EXPR): Delete.
	* internal-fn.def (FMA, FMS, FNMA, FNMS): New internal functions.
	* internal-fn.c (ternary_direct): New macro.
	(expand_ternary_optab_fn): Likewise.
	(direct_ternary_optab_supported_p): Likewise.
	* Makefile.in (build/genmatch.o): Depend on case-fn-macros.h.
	* builtins.c (fold_builtin_fma): Delete.
	(fold_builtin_3): Don't call it.
	* cfgexpand.c (expand_debug_expr): Remove FMA_EXPR handling.
	* expr.c (expand_expr_real_2): Likewise.
	* fold-const.c (operand_equal_p): Likewise.
	(fold_ternary_loc): Likewise.
	* gimple-pretty-print.c (dump_ternary_rhs): Likewise.
	* gimple.c (DEFTREECODE): Likewise.
	* gimplify.c (gimplify_expr): Likewise.
	* optabs-tree.c (optab_for_tree_code): Likewise.
	* tree-cfg.c (verify_gimple_assign_ternary): Likewise.
	* tree-eh.c (operation_could_trap_p): Likewise.
	(stmt_could_throw_1_p): Likewise.
	* tree-inline.c (estimate_operator_cost): Likewise.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	(op_code_prio): Likewise.
	* tree-ssa-loop-im.c (stmt_cost): Likewise.
	* tree-ssa-operands.c (get_expr_operands): Likewise.
	* tree.c (commutative_ternary_tree_code, add_expr): Likewise.
	* fold-const-call.h (fold_fma): Delete.
	* fold-const-call.c (fold_const_call_ssss): Handle CFN_FMS,
	CFN_FNMA and CFN_FNMS.
	(fold_fma): Delete.
	* genmatch.c (combined_fn): New enum.
	(commutative_ternary_tree_code): Remove FMA_EXPR handling.
	(commutative_op): New function.
	(commutate): Use it.  Handle more than 2 operands.
	(dt_operand::gen_gimple_expr): Use commutative_op.
	(parser::parse_expr): Allow :c to be used with non-binary
	operators if the commutative operand is known.
	* gimple-ssa-backprop.c (backprop::process_builtin_call_use): Handle
	CFN_FMS, CFN_FNMA and CFN_FNMS.
	(backprop::process_assign_use): Remove FMA_EXPR handling.
	* hsa-gen.c (gen_hsa_insns_for_operation_assignment): Likewise.
	(gen_hsa_fma): New function.
	(gen_hsa_insn_for_internal_fn_call): Use it for IFN_FMA, IFN_FMS,
	IFN_FNMA and IFN_FNMS.
	* match.pd: Add folds for IFN_FMS, IFN_FNMA and IFN_FNMS.
	* gimple-fold.h (follow_all_ssa_edges): Declare.
	* gimple-fold.c (follow_all_ssa_edges): New function.
	* tree-ssa-math-opts.c (convert_mult_to_fma_1): Use the
	gimple_build interface and use follow_all_ssa_edges to fold the result.
	(convert_mult_to_fma): Use direct_internal_fn_suppoerted_p
	instead of checking for optabs directly.
	* config/i386/i386.c (ix86_add_stmt_cost): Recognize FMAs as calls
	rather than FMA_EXPRs.
	* config/rs6000/rs6000.c (rs6000_gimple_fold_builtin): Create a
	call to IFN_FMA instead of an FMA_EXPR.

2018-05-17  Jim Wilson  <jimw@sifive.com>

	* expr.c (do_tablejump): When converting index to Pmode, if we have a
	sign extended promoted subreg, and the range does not have the sign bit
	set, then do a sign extend.

	* config/riscv/riscv.c (riscv_extend_comparands): In unsigned QImode
	test, check for sign extended subreg and/or constant operands, and
	do a sign extend in that case.

2018-05-17  Steve Ellcey  <sellcey@cavium.com>

	* config/aarch64/thunderx2t99.md (thunderx2t99_ls_both): Delete.
	(thunderx2t99_multiple): Delete psuedo-units from used cpus.
	Add untyped.
	(thunderx2t99_alu_shift): Remove alu_shift_reg, alus_shift_reg.
	Change logics_shift_reg to logics_shift_imm.
	(thunderx2t99_fp_loadpair_basic): Delete.
	(thunderx2t99_fp_storepair_basic): Delete.
	(thunderx2t99_asimd_int): Add neon_sub and neon_sub_q types.
	(thunderx2t99_asimd_polynomial): Delete.
	(thunderx2t99_asimd_fp_simple): Add neon_fp_mul_s_scalar_q
	and neon_fp_mul_d_scalar_q.
	(thunderx2t99_asimd_fp_conv): Add *int_to_fp* types.
	(thunderx2t99_asimd_misc): Delete neon_dup and neon_dup_q.
	(thunderx2t99_asimd_recip_step): Add missing *sqrt* types.
	(thunderx2t99_asimd_lut): Add missing tbl types.
	(thunderx2t99_asimd_ext): Delete.
	(thunderx2t99_asimd_load1_1_mult): Delete.
	(thunderx2t99_asimd_load1_2_mult): Delete.
	(thunderx2t99_asimd_load1_ldp): New.
	(thunderx2t99_asimd_load1): New.
	(thunderx2t99_asimd_load2): Add missing *load2* types.
	(thunderx2t99_asimd_load3): New.
	(thunderx2t99_asimd_load4): New.
	(thunderx2t99_asimd_store1_1_mult): Delete.
	(thunderx2t99_asimd_store1_2_mult): Delete.
	(thunderx2t99_asimd_store2_mult): Delete.
	(thunderx2t99_asimd_store2_onelane): Delete.
	(thunderx2t99_asimd_store_stp): New.
	(thunderx2t99_asimd_store1): New.
	(thunderx2t99_asimd_store2): New.
	(thunderx2t99_asimd_store3): New.
	(thunderx2t99_asimd_store4): New.

2018-05-17  Jerome Lambourg  <lambourg@adacore.com>

	* config/arm/arm_cmse.h (cmse_nsfptr_create, cmse_is_nsfptr): Remove
	#include <stdint.h>.  Replace intptr_t with __INTPTR_TYPE__.

2018-05-17  Pat Haugen  <pthaugen@us.ibm.com>
	    Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/85698
	* config/rs6000/rs6000.c (rs6000_output_move_128bit): Check dest
	operand.

2018-05-17  Richard Biener  <rguenther@suse.de>

	* tree-ssa-dse.c (dse_classify_store): Fix iterator increment
	for pruning loop and prune defs feeding only already visited PHIs.

2018-05-17  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Improve memset handling.

2018-05-17  Bin Cheng  <bin.cheng@arm.com>
	    Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85793
	* tree-vect-stmts.c (vectorizable_load): Handle 1 element-wise load
	for VMAT_ELEMENTWISE.

2018-05-17  Richard Sandiford  <richard.sandiford@linaro.org>

	* internal-fn.h (lookup_internal_fn): Declare
	* internal-fn.c (lookup_internal_fn): New function.
	* gimple.c (gimple_build_call_from_tree): Handle calls to
	internal functions.
	* gimple-pretty-print.c (dump_gimple_call): Print "." before
	internal function names.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	* tree-ssa-scopedtables.c (expr_hash_elt::print): Likewise.

2018-05-17  Richard Sandiford  <richard.sandiford@linaro.org>

	* gimple-fold.h (gimple_build): Make the function forms take
	combined_fn rather than built_in_function.
	(gimple_simplify): Likewise.
	* gimple-match-head.c (gimple_simplify): Likewise.
	* gimple-fold.c (gimple_build): Likewise.
	* tree-vect-loop.c (get_initial_def_for_reduction): Use gimple_build
	rather than gimple_build_call_internal.
	(get_initial_defs_for_reduction): Likewise.
	(vect_create_epilog_for_reduction): Likewise.
	(vectorizable_live_operation): Likewise.

2018-05-17  Martin Liska  <mliska@suse.cz>

	* gimple-ssa-sprintf.c (format_directive): Do not use
	space in between 'G_' and '('.

2018-05-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/85323
	* config/i386/i386.c (ix86_fold_builtin): Handle masked shifts
	even if the mask is not all ones.

	PR target/85323
	* config/i386/i386.c (ix86_fold_builtin): Fold shift builtins by
	vector.
	(ix86_gimple_fold_builtin): Likewise.

	PR target/85323
	* config/i386/i386.c: Include tree-vector-builder.h.
	(ix86_vector_shift_count): New function.
	(ix86_fold_builtin): Fold shift builtins by scalar count.
	(ix86_gimple_fold_builtin): Likewise.

	* config/i386/avx512fintrin.h (_mm512_set_epi16, _mm512_set_epi8,
	_mm512_setzero): New intrinsics.

2018-05-17  James Greenhalgh  <james.greenhalgh@arm.com>
	    Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.c (aarch64_expand_vector_init): Modify
	code generation for cases where splatting a value is not useful.
	* simplify-rtx.c (simplify_ternary_operation): Simplify
	vec_merge across a vec_duplicate and a paradoxical subreg forming
	a vector mode to a vec_concat.

2018-05-17  Olga Makhotina  <olga.makhotina@intel.com>

	* config.gcc: Support "goldmont-plus".
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect
	"goldmont-plus".
	* config/i386/i386-c.c (ix86_target_macros_internal): Handle
	PROCESSOR_GOLDMONT_PLUS.
	* config/i386/i386.c (m_GOLDMONT_PLUS): Define.
	(processor_target_table): Add "goldmont-plus".
	(PTA_GOLDMONT_PLUS): Define.
	(ix86_lea_outperforms): Add TARGET_GOLDMONT_PLUS.
	(get_builtin_code_for_version): Handle PROCESSOR_GOLDMONT_PLUS.
	(fold_builtin_cpu): Add M_INTEL_GOLDMONT_PLUS.
	(fold_builtin_cpu): Add "goldmont-plus".
	(ix86_add_stmt_cost): Add TARGET_GOLDMONT_PLUS.
	(ix86_option_override_internal): Add "goldmont-plus".
	* config/i386/i386.h (processor_costs): Define TARGET_GOLDMONT_PLUS.
	(processor_type): Add PROCESSOR_GOLDMONT_PLUS.
	* config/i386/x86-tune.def: Add m_GOLDMONT_PLUS.
	* doc/invoke.texi: Add goldmont-plus as x86 -march=/-mtune= CPU type.

2018-05-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85757
	* tree-ssa-dse.c (dse_classify_store): Record a PHI def and
	remove defs that only feed that PHI from further processing.

2018-05-16  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.md (<optab>si3_mask, <optab>si3_mask_1): Prepend
	asterisk to name.
	(<optab>di3_mask, <optab>di3_mask_1): Likewise.

2018-05-16  Mark Wielaard  <mark@klomp.org>

	* dwarf2out.c (count_index_strings): New function.
	(output_indirect_strings): Call count_index_strings and generate
	header for dwarf_version >= 5.

2018-05-16  Mark Wielaard  <mark@klomp.org>

	* dwarf2out.c (dwarf_FORM): New function.
	(set_indirect_string): Use dwarf_FORM.
	(reset_indirect_string): Likewise.
	(size_of_die): Likewise.
	(value_format): Likewise.
	(output_die): Likewise.
	(add_skeleton_AT_string): Likewise.
	(output_macinfo_op): Likewise.
	(index_string): Likewise.
	(output_index_string_offset): Likewise.
	(output_index_string): Likewise.
	(count_index_strings): Likewise.

2018-05-16  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000.md (prefetch): Generate ISA 2.06 instructions
	dcbt and dcbtstt with TH=16 if operands[2] is 0 and Power 8 or newer.

2018-05-16  Martin Jambor  <mjambor@suse.cz>

	* ipa-prop.c (ipa_free_all_edge_args): Remove.
	* ipa-prop.h (ipa_free_all_edge_args): Likewise.

2018-05-16  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.md (fma<mode>4): Change into expand pattern.
	(fnma<mode>4): Likewise.
	(fms<mode>4): Likewise.
	(fnms<mode>4): Likewise.
	(aarch64_fma<mode>4): Rename insn, reorder accumulator operand.
	(aarch64_fnma<mode>4): Likewise.
	(aarch64_fms<mode>4): Likewise.
	(aarch64_fnms<mode>4): Likewise.
	(aarch64_fnmadd<mode>4): Likewise.

2018-05-16  Jason Merrill  <jason@redhat.com>

	* tree.c (warn_deprecated_use): Return bool.  Simplify logic.

2018-05-16  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (struct stmt_info_for_cost): Add where member.
	(dump_stmt_cost): Declare.
	(add_stmt_cost): Dump cost we add.
	(add_stmt_costs): New function.
	(vect_model_simple_cost, vect_model_store_cost, vect_model_load_cost):
	No longer exported.
	(vect_analyze_stmt): Adjust prototype.
	(vectorizable_condition): Likewise.
	(vectorizable_live_operation): Likewise.
	(vectorizable_reduction): Likewise.
	(vectorizable_induction): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_operations): Create local
	cost vector to pass to vectorizable_ and record afterwards.
	(vect_model_reduction_cost): Take cost vector argument and adjust.
	(vect_model_induction_cost): Likewise.
	(vectorizable_reduction): Likewise.
	(vectorizable_induction): Likewise.
	(vectorizable_live_operation): Likewise.
	* tree-vect-slp.c (vect_create_new_slp_node): Initialize
	SLP_TREE_NUMBER_OF_VEC_STMTS.
	(vect_analyze_slp_cost_1): Remove.
	(vect_analyze_slp_cost): Likewise.
	(vect_slp_analyze_node_operations): Take visited args and
	a target cost vector.  Avoid processing already visited stmt sets.
	(vect_slp_analyze_operations): Use a local cost vector to gather
	costs and register those of non-discarded instances.
	(vect_bb_vectorization_profitable_p): Use add_stmt_costs.
	(vect_schedule_slp_instance): Remove copying of
	SLP_TREE_NUMBER_OF_VEC_STMTS.  Instead assert that it is not
	zero.
	* tree-vect-stmts.c (record_stmt_cost): Remove path directly
	adding cost.  Record cost entry location.
	(vect_prologue_cost_for_slp_op): Function to compute cost of
	a constant or invariant generated for SLP vect in the prologue,
	split out from vect_analyze_slp_cost_1.
	(vect_model_simple_cost): Make static.  Adjust for SLP costing.
	(vect_model_promotion_demotion_cost): Likewise.
	(vect_model_store_cost): Likewise, make static.
	(vect_model_load_cost): Likewise.
	(vectorizable_bswap): Add cost vector arg and adjust.
	(vectorizable_call): Likewise.
	(vectorizable_simd_clone_call): Likewise.
	(vectorizable_conversion): Likewise.
	(vectorizable_assignment): Likewise.
	(vectorizable_shift): Likewise.
	(vectorizable_operation): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	(vectorizable_condition): Likewise.
	(vectorizable_comparison): Likewise.
	(can_vectorize_live_stmts): Likewise.
	(vect_analyze_stmt): Likewise.
	(vect_transform_stmt): Adjust calls to vectorizable_*.
	* tree-vectorizer.c: Include gimple-pretty-print.h.
	(dump_stmt_cost): New function.

2018-05-16  Richard Biener  <rguenther@suse.de>

	* params.def (PARAM_DSE_MAX_ALIAS_QUERIES_PER_STORE): New param.
	* doc/invoke.texi (dse-max-alias-queries-per-store): Document.
	* tree-ssa-dse.c: Include tree-ssa-loop.h.
	(check_name): New callback.
	(dse_classify_store): Track cycles via a visited bitmap of PHI
	defs and simplify handling of in-loop and across loop dead stores
	and properly fail for loop-variant refs.  Handle byte-tracking with
	multiple defs.  Use PARAM_DSE_MAX_ALIAS_QUERIES_PER_STORE for
	limiting the walk.

2018-05-16  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vectorizer.h (vect_get_vector_types_for_stmt): Declare.
	(vect_get_mask_type_for_stmt): Likewise.
	* tree-vect-slp.c (vect_two_operations_perm_ok_p): New function,
	split out from...
	(vect_build_slp_tree_1): ...here.  Use vect_get_vector_types_for_stmt
	to determine the statement's vector type and the vector type that
	should be used for calculating nunits.  Deal with cases in which
	the type has to be deferred.
	(vect_slp_analyze_node_operations): Use vect_get_vector_types_for_stmt
	and vect_get_mask_type_for_stmt to calculate STMT_VINFO_VECTYPE.
	* tree-vect-loop.c (vect_determine_vf_for_stmt_1)
	(vect_determine_vf_for_stmt): New functions, split out from...
	(vect_determine_vectorization_factor): ...here.
	* tree-vect-stmts.c (vect_get_vector_types_for_stmt)
	(vect_get_mask_type_for_stmt): New functions, split out from
	vect_determine_vectorization_factor.

2018-05-16  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (verify_gimple_assign_ternary): Properly
	verify the [VEC_]COND_EXPR embedded comparison.

2018-05-15  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/85753
	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): Handle
	RECORD_TYPE in addition to ARRAY_TYPE.

2018-05-15  Martin Sebor  <msebor@redhat.com>

	PR middle-end/85643
	* calls.c (get_attr_nonstring_decl): Handle MEM_REF.

2018-05-15  Richard Biener  <rguenther@suse.de>

	* tree-ssa-dse.c (dse_classify_store): Remove use_stmt parameter,
	add by_clobber_p one.  Change algorithm to collect all defs
	representing uses we need to walk and try reducing them to
	a single one before failing.
	(dse_dom_walker::dse_optimize_stmt): Adjust.

2018-05-13  Mark Wielaard  <mark@klomp.org>

	* dwarf2out.c (dwarf_OP): Handle DW_OP_addrx and DW_OP_constx.
	(size_of_loc_descr): Likewise.
	(output_loc_operands): Likewise.
	(output_loc_operands_raw): Likewise.
	(dw_addr_op): Use dwarf_OP () for DW_OP_constx and DW_OP_addrx.
	(resolve_addr_in_expr): Handle DW_OP_addrx and DW_OP_constx.
	(hash_loc_operands): Likewise.
	(compare_loc_operands): Likewise.

2018-05-14  Mark Wielaard  <mark@klomp.org>

	* dwarf2out.c (count_index_addrs): New function.
	(dwarf2out_finish): Use count_index_addrs to calculate addrs_length.

2018-05-15  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/83648
	* ipa-pure-const.c (malloc_candidate_p): Allow function with NULL
	return value as malloc candidate.

2018-05-15  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR ipa/85734
	* ipa-pure-const.c (warn_function_malloc): Pass value of known_finite
	param as true in call to suggest_attribute.

2018-05-14  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/invoke.texi (RS/6000 and PowerPC Options): Delete @itemx for
	-mreadonly-in-sdata.

2018-05-14  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-simd.md (*aarch64_crypto_aese_fused):
	New pattern.
	(aarch64_crypto_aesd_fused): Likewise.

2018-05-14  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.md (mov<mode>): Remove '*' in alternatives.
	(movsi_aarch64): Likewise.
	(load_pairsi): Likewise.
	(load_pairdi): Likewise.
	(store_pairsi): Likewise.
	(store_pairdi): Likewise.
	(load_pairsf): Likewise.
	(load_pairdf): Likewise.
	(store_pairsf): Likewise.
	(store_pairdf): Likewise.
	(zero_extend): Likewise.
	(trunc): Swap alternatives.
	(fcvt_target): Add '?' to prefer w over r.

2018-05-14  Jakub Jelinek  <jakub@redhat.com>

	PR target/85756
	* config/i386/i386.md: Disallow non-commutative arithmetics in
	last twpeephole for mem {+,-,&,|,^}= x; mem != 0 after cmpelim
	optimization.  Use COMMUTATIVE_ARITH_P test rather than != MINUS
	in the peephole2 before it.

2018-05-14  Sebastian Peryt  <sebastian.peryt@intel.com>

	* common/config/i386/i386-common.c (OPTION_MASK_ISA_CLDEMOTE_SET,
	OPTION_MASK_ISA_CLDEMOTE_UNSET): New defines.
	(ix86_handle_option): Handle -mcldemote.
	* config.gcc: New header.
	* config/i386/cldemoteintrin.h: New file.
	* config/i386/cpuid.h (bit_CLDEMOTE): New bit.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect
	-mcldemote.
	* config/i386/i386-c.c (ix86_target_macros_internal): Handle
	OPTION_MASK_ISA_CLDEMOTE.
	* config/i386/i386.c (ix86_target_string): Add -mcldemote.
	(ix86_valid_target_attribute_inner_p): Ditto.
	(enum ix86_builtins): Add IX86_BUILTIN_CLDEMOTE.
	(ix86_init_mmx_sse_builtins): Define __builtin_ia32_cldemote.
	(ix86_expand_builtin): Expand IX86_BUILTIN_CLDEMOTE.
	* config/i386/i386.h (TARGET_CLDEMOTE, TARGET_CLDEMOTE_P): New.
	* config/i386/i386.md (UNSPECV_CLDEMOTE): New.
	(cldemote): New.
	* config/i386/i386.opt: Add -mcldemote.
	* config/i386/x86intrin.h: New header.
	* doc/invoke.texi: Add -mcldemote.

2018-05-14  Richard Biener  <rguenther@suse.de>

	* doc/match-and-simplify.texi: Adjust :s documentation.

2018-05-14  Alexander Monakov  <amonakov@ispras.ru>

	* sort.cc (REORDER_23): Pass the type for the temporaries instead of
	intended memcpy size.
	(REORDER_45): Likewise.

2018-05-13  Alexander Monakov  <amonakov@ispras.ru>

	* sort.cc: New file.
	* system.h [!CHECKING_P] (qsort): Redirect to gcc_qsort.
	* vec.c (qsort_chk): Use gcc_qsort.
	* Makefile.in (OBJS-libcommon): Add sort.o.
	(build/sort.o): New target.  Use it...
	(BUILD_RTL): ... here, and...
	(build/gencfn-macros): ... here, and...
	(build/genmatch): ... here.

2018-05-13  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Check that n15 is valid to --with-cpu.
	* config/nds32/nds32-graywolf.md: New file.
	* config/nds32/nds32-opts.h (nds32_cpu_type): Add CPU_GRAYWOLF.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for n15
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for n15 pipeline.
	* config/nds32/nds32-utils.c: More implementations for n15 pipeline.
	* config/nds32/nds32.md (pipeline_model): Add graywolf.
	* config/nds32/nds32.opt (mcpu): Support n15 pipeline cpus.
	* config/nds32/pipelines.md: Include n15 settings.

2018-05-13  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Check that n12/n13 are valid to --with-cpu.
	* config/nds32/nds32-n13.md: New file.
	* config/nds32/nds32-opts.h (nds32_cpu_type): Add CPU_N12 and CPU_N13.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for n12/n13
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for n12/n13 pipeline.
	* config/nds32/nds32.md (pipeline_model): Add n13.
	* config/nds32/nds32.opt (mcpu): Support n12/n13 pipeline cpus.
	* config/nds32/pipelines.md: Include n13 settings.

2018-05-13  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Check that n10/d10 are valid to --with-cpu.
	* config/nds32/nds32-n10.md: New file.
	* config/nds32/nds32-opts.h (nds32_cpu_type): Add CPU_N10.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for n10
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for n10 pipeline.
	* config/nds32/nds32-utils.c: More implementations for n10 pipeline.
	* config/nds32/nds32.md (pipeline_model): Add n10.
	* config/nds32/nds32.opt (mcpu): Support n10 pipeline cpus.
	* config/nds32/pipelines.md: Include n10 settings.

2018-05-13  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32be-*-*): Handle --with-ext-dsp.
	* config/nds32/constants.md (unspec_element, unspec_volatile_element):
	Add enum values for DSP extension instructions.
	* config/nds32/constraints.md (Iu06, IU06, CVp5, CVs5, CVs2, CVhi):
	New constraints.
	* config/nds32/iterators.md (shifts, shiftrt, sat_plus, all_plus,
	sat_minus, all_minus, plus_minus, extend, sumax, sumin, sumin_max):
	New code iterators.
	(su, zs, uk, opcode, add_rsub, add_sub): New code attributes.
	* config/nds32/nds32-dspext.md: New file for DSP implementation.
	* config/nds32/nds32-intrinsic.c: Implementation of DSP extension.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32-md-auxiliary.c: Likewise.
	* config/nds32/nds32-memory-manipulation.c: Consider DSP extension.
	* config/nds32/nds32-predicates.c (const_vector_to_hwint): New.
	(nds32_valid_CVp5_p, nds32_valid_CVs5_p): New.
	(nds32_valid_CVs2_p, nds32_valid_CVhi_p): New.
	* config/nds32/nds32-protos.h: New declarations for DSP extension.
	* config/nds32/nds32-utils.c (extract_mac_non_acc_rtx): New case
	TYPE_DMAC in switch statement.
	* config/nds32/nds32.c: New checking and implementation for DSP
	extension instructions.
	* config/nds32/nds32.h: Likewise.
	* config/nds32/nds32.md: Likewise.
	* config/nds32/nds32.opt (mhw-abs, mext-dsp): New options.
	* config/nds32/predicates.md: Implement new predicates for DSP
	extension.

2018-05-11  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (mov<mode>_softfloat, FMOVE32):
	Reformat alternatives and attributes so it is easier to identify
	which constraints/attributes go with which instruction.
	(mov<mode>_hardfloat32, FMOVE64): Likewise.
	(mov<mode>_softfloat32, FMOVE64): Likewise.
	(mov<mode>_hardfloat64, FMOVE64): Likewise.
	(mov<mode>_softfloat64, FMOVE64): Likewise.

2018-05-11  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* doc/extend.texi (PowerPC Built-in Functions): Rename this
	subsection.
	(Basic PowerPC Built-in Functions): The new name of the
	subsection previously known as "PowerPC Built-in Functions".
	(Basic PowerPC Built-in Functions Available on all Configurations):
	New subsubsection.
	(Basic PowerPC Built-in Functions Available on ISA 2.05): Likewise.
	(Basic PowerPC Built-in Functions Available on ISA 2.06): Likewise.
	(Basic PowerPC Built-in Functions Available on ISA 2.07): Likewise.
	(Basic PowerPC Built-in Functions Available on ISA 3.0): Likewise.

2018-05-11  Martin Jambor  <mjambor@suse.cz>

	PR ipa/85655
	* ipa-cp.c (intersect_with_plats): Check that the lattice contains
	single const.

2018-05-11  Richard Earnshaw  <rearnsha@arm.com>

	PR target/85733
	* config/arm/arm-cpus.in (fgroup ARMv6m): Add be8 feature.

2018-05-11  Sebastian Peryt  <sebastian.peryt@intel.com>

	* common/config/i386/i386-common.c (OPTION_MASK_ISA_WAITPKG_SET,
	OPTION_MASK_ISA_WAITPKG_UNSET): New defines.
	(ix86_handle_option): Handle -mwaitpkg.
	* config.gcc: New header.
	* config/i386/cpuid.h (bit_WAITPKG): New bit.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect -mwaitpkg.
	* config/i386/i386-builtin-types.def ((UINT8, UNSIGNED, UINT64)): New
	function type.
	* config/i386/i386-c.c (ix86_target_macros_internal): Handle
	OPTION_MASK_ISA_WAITPKG.
	* config/i386/i386.c (ix86_target_string): Add -mwaitpkg.
	(ix86_option_override_internal): Add PTA_WAITPKG.
	(ix86_valid_target_attribute_inner_p): Add -mwaitpkg.
	(enum ix86_builtins): Add IX86_BUILTIN_UMONITOR, IX86_BUILTIN_UMWAIT,
	IX86_BUILTIN_TPAUSE.
	(ix86_init_mmx_sse_builtins): Define __builtin_ia32_umonitor,
	__builtin_ia32_umwait and __builtin_ia32_tpause.
	(ix86_expand_builtin): Expand IX86_BUILTIN_UMONITOR,
	IX86_BUILTIN_UMWAIT, IX86_BUILTIN_TPAUSE.
	* config/i386/i386.h (TARGET_WAITPKG, TARGET_WAITPKG_P): New.
	* config/i386/i386.md (UNSPECV_UMWAIT, UNSPECV_UMONITOR,
	UNSPECV_TPAUSE): New.
	(umwait, umwait_rex64, umonitor_<mode>, tpause, tpause_rex64): New.
	* config/i386/i386.opt: Add -mwaitpkg.
	* config/i386/waitpkgintrin.h: New file.
	* config/i386/x86intrin.h: New header.
	* doc/invoke.texi: Add -mwaitpkg.

2018-05-11  Richard Earnshaw  <rearnsha@arm.com>

	PR target/85606
	* config/arm/arm-cpus.in: Add comment that ARMv6-m and ARMv6S-m are now
	equivalent.
	(cortex-m0): Use armv6s-m isa.
	(cortex-m0plus): Likewise.
	(cortex-m1): Likewise.
	(cortex-m0.small-multiply): Likewise.
	(cortex-m0plus.small-multiply): Likewise.
	(cortex-m1.small-multiply): Likewise.

2018-05-11  Allan Sandfeld Jensen  <allan.jensen@qt.io>
	    Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/85692
	* tree-ssa-forwprop.c (simplify_vector_constructor): Try two
	source permute as well.

2018-05-11  Martin Liska  <mliska@suse.cz>

	PR sanitizer/85556
	* doc/extend.texi: Document LLVM style format for no_sanitize
	attribute.

2018-05-10  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (mode_supports_dq_form): Rename
	mode_supports_vsx_dform_quad to mode_supports_dq_form.
	(mode_supports_vsx_dform_quad): Likewise.
	(mode_supports_vmx_dform): Move these functions to be next to the
	other mode_supports functions.
	(mode_supports_dq_form): Likewise.
	(quad_address_p): Change calls of mode_supports_vsx_dform_quad to
	mode_supports_dq_form.
	(reg_offset_addressing_ok_p): Likewise.
	(offsettable_ok_by_alignment): Likewise.
	(rs6000_legitimate_offset_address_p): Likewise.
	(legitimate_lo_sum_address_p): Likewise.
	(rs6000_legitimize_address): Likewise.
	(rs6000_legitimize_reload_address): Likewise.
	(rs6000_secondary_reload_inner): Likewise.
	(rs6000_preferred_reload_class): Likewise.
	(rs6000_output_move_128bit): Likewise.

2018-05-10  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (ix86_expand_builtin) <case IX86_BUILTIN_RDPID>:
	Generate SImode target register for null target.
	<case IX86_BUILTIN_XGETBV>: Ditto.
	<case IX86_BUILTIN_XSETBV>: Optimize LSHIFTRT generation.
	* config/i386/xsaveintrin.h (_xgetbv): Add missing return.

2018-05-10  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000.md (prefetch): Generate ISA 2.06 instructions
	dcbtt and dcbtstt if operands[2] is 0.

2018-05-10  Uros Bizjak  <ubizjak@gmail.com>

	PR target/85693
	* config/i386/sse.md (usadv64qi): New expander.

2018-05-10  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md (altivec_vmrghb, altivec_vmrghh,
	altivec_vmrghw, altivec_vmrglb, altivec_vmrglh, altivec_vmrglw): Remove
	-maltivec=be support.
	(vec_widen_umult_even_v16qi, vec_widen_smult_even_v16qi,
	vec_widen_umult_even_v8hi, vec_widen_smult_even_v8hi,
	vec_widen_umult_even_v4si, vec_widen_smult_even_v4si,
	vec_widen_umult_odd_v16qi, vec_widen_smult_odd_v16qi,
	vec_widen_umult_odd_v8hi, vec_widen_smult_odd_v8hi,
	vec_widen_umult_odd_v4si, vec_widen_smult_odd_v4si, altivec_vpkpx,
	altivec_vpks<VI_char>ss, altivec_vpks<VI_char>us,
	altivec_vpku<VI_char>us, altivec_vpku<VI_char>um, altivec_vsum2sws,
	altivec_vsumsws): Adjust.
	(altivec_vspltb *altivec_vspltb_internal, altivec_vsplth,
	*altivec_vsplth_internal, altivec_vspltw, *altivec_vspltw_internal,
	altivec_vspltsf, *altivec_vspltsf_internal): Remove -maltivec=be
	support.
	(altivec_vperm_<mode>, altivec_vperm_<mode>_uns,
	altivec_vupkhs<VU_char>, altivec_vupkls<VU_char>, altivec_vupkhpx,
	altivec_vupklpx, altivec_lvsl, altivec_lvsr): Adjust.
	(altivec_lve<VI_char>x): Delete expand.
	(*altivec_lve<VI_char>x_internal): Rename to...
	(altivec_lve<VI_char>x): ... this.
	(altivec_lvxl_<mode>): Delete expand.
	(*altivec_lvxl_<mode>_internal): Rename to ...
	(altivec_lvxl_<mode>): ... this.
	(altivec_stvxl_<mode>): Delete expand.
	(*altivec_stvxl_<mode>_internal): Rename to ...
	(altivec_stvxl_<mode>): ... this.
	(altivec_stve<VI_char>x): Delete expand.
	(*altivec_stve<VI_char>x_internal): Rename to ...
	(altivec_stve<VI_char>x): ... this.
	(doublee<mode>2, unsdoubleev4si2, doubleo<mode>2, unsdoubleov4si2,
	doubleh<mode>2, unsdoublehv4si2, doublel<mode>2, unsdoublelv4si2,
	reduc_plus_scal_<mode>): Adjust.
	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Adjust
	comment.
	(rs6000_cpu_cpp_builtins): Adjust.
	(altivec_resolve_overloaded_builtin): Remove -maltivec=be support.
	* config/rs6000/rs6000-protos.h (altivec_expand_lvx_be,
	altivec_expand_stvx_be, altivec_expand_stvex_be): Delete.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Remove
	-maltivec=be support.
	(rs6000_split_vec_extract_var): Adjust.
	(rs6000_split_v4si_init): Adjust.
	(swap_selector_for_mode): Delete.
	(altivec_expand_lvx_be, altivec_expand_stvx_be,
	altivec_expand_stvex_be): Delete.
	(altivec_expand_lv_builtin, altivec_expand_stv_builtin): Remove
	-maltivec=be support.
	(rs6000_gimple_fold_builtin): Ditto.
	(rs6000_generate_float2_double_code, rs6000_generate_float2_code):
	Adjust.
	* config/rs6000/rs6000.h (VECTOR_ELT_ORDER_BIG): Delete.
	(TARGET_DIRECT_MOVE_64BIT): Adjust.
	* config/rs6000/rs6000.md (split for extendsidi2 for vectors): Adjust.
	* config/rs6000/rs6000.opt (maltivec=le, maltivec=be): Delete.
	* config/rs6000/vsx.md (floate<mode>, unsfloatev2di, floato<mode>,
	unsfloatov2di, vsignedo_v2df, vsignede_v2df, vunsignedo_v2df,
	vunsignede_v2df, vsx_extract_<mode>_p9, *vsx_extract_si,
	*vsx_extract_<mode>_p8, *vsx_extract_si_<uns>float_df,
	*vsx_extract_si_<uns>float_<mode>, vsx_set_<mode>_p9, vsx_set_v4sf_p9,
	*vsx_insert_extract_v4sf_p9, *vsx_insert_extract_v4sf_p9_2, and an
	anonymous split): Adjust.
	(vsx_mergel_<mode>, vsx_mergeh_<mode>): Remove -maltivec=be support.
	(vsx_xxspltd_<mode>, extract4b, insert4b): Adjust.

2018-05-10  Eric Botcazou  <ebotcazou@adacore.com>

	* configure.ac (gcc_gxx_include_dir_add_sysroot): Set it to 1 only
	when --with-gxx-include-dir is also specified.
	* configure: Regenerate.

2018-05-09  Jim Wilson  <jimw@sifive.com>

	PR target/84797
	* config.gcc (riscv*-*-*): Handle --with-multilib-list.
	* config/riscv/t-withmultilib: New.
	* config/riscv/withmultilib.h: New.
	* doc/install.texi: Document RISC-V --with-multilib-list support.

2018-05-09  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_bb_slp_scalar_cost): Fill a cost
	vector.
	(vect_bb_vectorization_profitable_p): Adjust.  Compute
	actual scalar cost using the cost vector and the add_stmt_cost
	machinery.

2018-05-09  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/85645
	* config/rs6000/rs6000.c (rs6000_emit_prologue_components): Put a SET
	in the REG_CFA_REGISTER note for LR, don't leave it empty.

2018-05-09  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/85645
	* shrink-wrap.c (spread_components): Return a boolean saying if
	anything was changed.
	(try_shrink_wrapping_separate): Iterate spread_components until
	nothing changes anymore.

2018-05-09  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/85645
	* regrename.c (build_def_use): Also kill the chains that include the
	destination of a REG_CFA_REGISTER note.

2018-05-09  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/85645
	*  regcprop.c (copyprop_hardreg_forward_1): Don't propagate into an
	insn that has a REG_CFA_REGISTER note.

2018-05-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* cfgexpand.c (expand_clobber): New function.
	(expand_gimple_stmt_1): Use it.
	* tree-vect-stmts.c (vect_clobber_variable): New function,
	split out from...
	(vectorizable_simd_clone_call): ...here.
	(vectorizable_store): Emit a clobber either side of an
	IFN_STORE_LANES sequence.
	(vectorizable_load): Emit a clobber after an IFN_LOAD_LANES sequence.

2018-05-09  Tom de Vries  <tom@codesourcery.com>

	PR target/85626
	* config/nvptx/nvptx.md (define_insn "trap", define_insn "trap_if_true")
	(define_insn "trap_if_false"): Add exit after trap.

2018-05-09  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/85638
	* bb-reorder.c: Include common/common-target.h.
	(create_forwarder_block): New function extracted from...
	(fix_up_crossing_landing_pad): ...here.  Rename into...
	(dw2_fix_up_crossing_landing_pad): ...this.
	(sjlj_fix_up_crossing_landing_pad): New function.
	(find_rarely_executed_basic_blocks_and_crossing_edges): In SJLJ mode,
	call sjlj_fix_up_crossing_landing_pad if there are incoming EH edges
	from both partitions and exit the loop after one iteration.

2018-05-08  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	Revert:
	* doc/extend.texi (PowerPC Built-in Functions): Rename this
	subsection.
	(Basic PowerPC Built-in Functions): The new name of the
	subsection previously known as "PowerPC Built-in Functions".
	(Basic PowerPC Built-in Functions Available on all Configurations):
	New subsubsection.
	(Basic PowerPC Built-in Functions Available on ISA 2.05): New
	subsubsection.
	(Basic PowerPC Built-in Functions Available on ISA 2.06): New
	subsubsection.
	(Basic PowerPC Built-in Functions Available on ISA 2.07): New
	subsubsection.
	(Basic PowerPC Built-in Functions Available on ISA 3.0): New
	subsubsection.

2018-05-08  Jim Wilson  <jimw@sifive.com>

	* config/riscv/linux.h (MUSL_ABI_SUFFIX): Delete unnecessary backslash.
	(LD_EMUL_SUFFIX): New.
	(LINK_SPEC): Use it.

2018-05-08  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* doc/extend.texi (PowerPC Built-in Functions): Rename this
	subsection.
	(Basic PowerPC Built-in Functions): The new name of the
	subsection previously known as "PowerPC Built-in Functions".
	(Basic PowerPC Built-in Functions Available on all Configurations):
	New subsubsection.
	(Basic PowerPC Built-in Functions Available on ISA 2.05): New
	subsubsection.
	(Basic PowerPC Built-in Functions Available on ISA 2.06): New
	subsubsection.
	(Basic PowerPC Built-in Functions Available on ISA 2.07): New
	subsubsection.
	(Basic PowerPC Built-in Functions Available on ISA 3.0): New
	subsubsection.

2018-05-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/85683
	* config/i386/i386.md: Add peepholes for mem {+,-,&,|,^}= x; mem != 0
	after cmpelim optimization.

2018-05-08  Olga Makhotina  <olga.makhotina@intel.com>

	* config.gcc: Support "goldmont".
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect "goldmont".
	* config/i386/i386-c.c (ix86_target_macros_internal): Handle
	PROCESSOR_GOLDMONT.
	* config/i386/i386.c (m_GOLDMONT): Define.
	(processor_target_table): Add "goldmont".
	(PTA_GOLDMONT): Define.
	(ix86_lea_outperforms): Add TARGET_GOLDMONT.
	(get_builtin_code_for_version): Handle PROCESSOR_GOLDMONT.
	(fold_builtin_cpu): Add M_INTEL_GOLDMONT.
	(fold_builtin_cpu): Add "goldmont".
	(ix86_add_stmt_cost): Add TARGET_GOLDMONT.
	(ix86_option_override_internal): Add "goldmont".
	* config/i386/i386.h (processor_costs): Define TARGET_GOLDMONT.
	(processor_type): Add PROCESSOR_GOLDMONT.
	* config/i386/i386.md: Add CPU "glm".
	* config/i386/glm.md: New file.
	* config/i386/x86-tune.def: Add m_GOLDMONT.
	* doc/invoke.texi: Add goldmont as x86 -march=/-mtune= CPU type.

2018-05-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/85572
	* config/i386/i386.c (ix86_expand_sse2_abs): Handle E_V2DImode and
	E_V4DImode.
	* config/i386/sse.md (abs<mode>2): Use VI_AVX2 iterator instead of
	VI1248_AVX512VL_AVX512BW.  Handle V2DImode and V4DImode if not
	TARGET_AVX512VL using ix86_expand_sse2_abs.  Formatting fixes.

	PR target/85317
	* config/i386/i386.c (ix86_fold_builtin): Handle
	IX86_BUILTIN_{,P}MOVMSK{PS,PD,B}{,128,256}.

	PR target/85480
	* config/i386/sse.md (ssequaterinsnmode): New mode attribute.
	(*<extract_type>_vinsert<shuffletype><extract_suf>_0): New pattern.

2018-05-08  Richard Earnshaw  <rearnsha@arm.com>

	PR target/85658
	* config/arm/parsecpu.awk (check_cpu): Fix operator precedence.
	(check_arch): Likewise.
	(check_fpu): Return the result rather than printing it.
	(end arch): Fix operator precedence.
	(end cpu): Likewise.
	(END): Print the result from check_fpu.

2018-05-08  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-sve.md (*pred_cmp<cmp_op><mode>_combine)
	(*pred_cmp<cmp_op><mode>, *fcm<cmp_op><mode>_and_combine)
	(*fcmuo<mode>_and_combine, *fcm<cmp_op><mode>_and)
	(*fcmuo<mode>_and): New patterns.

2018-05-08  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/iterators.md (UNSPEC_COND_LO, UNSPEC_COND_LS)
	(UNSPEC_COND_HI, UNSPEC_COND_HS, UNSPEC_COND_UO): Delete.
	(SVE_INT_CMP, SVE_FP_CMP): New code iterators.
	(cmp_op, sve_imm_con): New code attributes.
	(SVE_COND_INT_CMP, imm_con): Delete.
	(cmp_op): Remove above unspecs from int attribute.
	* config/aarch64/aarch64-sve.md (*vec_cmp<cmp_op>_<mode>): Rename
	to...
	(*cmp<cmp_op><mode>): ...this.  Use UNSPEC_MERGE_PTRUE instead of
	comparison-specific unspecs.
	(*vec_cmp<cmp_op>_<mode>_ptest): Rename to...
	(*cmp<cmp_op><mode>_ptest): ...this and adjust likewise.
	(*vec_cmp<cmp_op>_<mode>_cc): Rename to...
	(*cmp<cmp_op><mode>_cc): ...this and adjust likewise.
	(*vec_fcm<cmp_op><mode>): Rename to...
	(*fcm<cmp_op><mode>): ...this and adjust likewise.
	(*vec_fcmuo<mode>): Rename to...
	(*fcmuo<mode>): ...this and adjust likewise.
	(*pred_fcm<cmp_op><mode>): New pattern.
	* config/aarch64/aarch64.c (aarch64_emit_unop, aarch64_emit_binop)
	(aarch64_emit_sve_ptrue_op, aarch64_emit_sve_ptrue_op_cc): New
	functions.
	(aarch64_unspec_cond_code): Remove handling of LTU, GTU, LEU, GEU
	and UNORDERED.
	(aarch64_gen_unspec_cond, aarch64_emit_unspec_cond): Delete.
	(aarch64_emit_sve_predicated_cond): New function.
	(aarch64_expand_sve_vec_cmp_int): Use aarch64_emit_sve_ptrue_op_cc.
	(aarch64_emit_unspec_cond_or): Replace with...
	(aarch64_emit_sve_or_conds): ...this new function.  Use
	aarch64_emit_sve_ptrue_op for the individual comparisons and
	aarch64_emit_binop to OR them together.
	(aarch64_emit_inverted_unspec_cond): Replace with...
	(aarch64_emit_sve_inverted_cond): ...this new function.  Use
	aarch64_emit_sve_ptrue_op for the comparison and
	aarch64_emit_unop to invert the result.
	(aarch64_expand_sve_vec_cmp_float): Update after the above
	changes.  Use aarch64_emit_sve_ptrue_op for native comparisons.

2018-05-07  Nathan Sidwell  <nathan@acm.org>

	* doc/invoke.texi (C++ Dialect Options): Remove -ffor-scope.
	* doc/extend.texi (Deprecated Features): Remove -fno-for-scope
	(Backwards Compatibility): Likewise.

2018-05-07  Luis Machado  <luis.machado@linaro.org>

	PR bootstrap/85681
	Revert:
	2018-05-07  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64-protos.h (cpu_prefetch_tune)
	<prefetch_dynamic_strides>: New const bool field.
	* config/aarch64/aarch64.c (generic_prefetch_tune): Update to include
	prefetch_dynamic_strides.
	(exynosm1_prefetch_tune): Likewise.
	(thunderxt88_prefetch_tune): Likewise.
	(thunderx_prefetch_tune): Likewise.
	(thunderx2t99_prefetch_tune): Likewise.
	(qdf24xx_prefetch_tune): Likewise. Set prefetch_dynamic_strides
	to false.
	(aarch64_override_options_internal): Update to set
	PARAM_PREFETCH_DYNAMIC_STRIDES.
	* doc/invoke.texi (prefetch-dynamic-strides): Document new option.
	* params.def (PARAM_PREFETCH_DYNAMIC_STRIDES): New.
	* params.h (PARAM_PREFETCH_DYNAMIC_STRIDES): Define.
	* tree-ssa-loop-prefetch.c (should_issue_prefetch_p): Account for
	prefetch-dynamic-strides setting.

	2018-05-07  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64-protos.h (cpu_prefetch_tune)
	<minimum_stride>: New const int field.
	* config/aarch64/aarch64.c (generic_prefetch_tune): Update to include
	minimum_stride field.
	(exynosm1_prefetch_tune): Likewise.
	(thunderxt88_prefetch_tune): Likewise.
	(thunderx_prefetch_tune): Likewise.
	(thunderx2t99_prefetch_tune): Likewise.
	(qdf24xx_prefetch_tune): Likewise. Set minimum_stride to 2048.
	(aarch64_override_options_internal): Update to set
	PARAM_PREFETCH_MINIMUM_STRIDE.
	* doc/invoke.texi (prefetch-minimum-stride): Document new option.
	* params.def (PARAM_PREFETCH_MINIMUM_STRIDE): New.
	* params.h (PARAM_PREFETCH_MINIMUM_STRIDE): Define.
	* tree-ssa-loop-prefetch.c (should_issue_prefetch_p): Return false if
	stride is constant and is below the minimum stride threshold.

2018-05-07  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64.c (qdf24xx_prefetch_tune) <l2_cache_size>: Set
	to 512.

2018-05-07  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64-protos.h (cpu_prefetch_tune)
	<prefetch_dynamic_strides>: New const bool field.
	* config/aarch64/aarch64.c (generic_prefetch_tune): Update to include
	prefetch_dynamic_strides.
	(exynosm1_prefetch_tune): Likewise.
	(thunderxt88_prefetch_tune): Likewise.
	(thunderx_prefetch_tune): Likewise.
	(thunderx2t99_prefetch_tune): Likewise.
	(qdf24xx_prefetch_tune): Likewise. Set prefetch_dynamic_strides
	to false.
	(aarch64_override_options_internal): Update to set
	PARAM_PREFETCH_DYNAMIC_STRIDES.
	* doc/invoke.texi (prefetch-dynamic-strides): Document new option.
	* params.def (PARAM_PREFETCH_DYNAMIC_STRIDES): New.
	* params.h (PARAM_PREFETCH_DYNAMIC_STRIDES): Define.
	* tree-ssa-loop-prefetch.c (should_issue_prefetch_p): Account for
	prefetch-dynamic-strides setting.

2018-05-07  Luis Machado  <luis.machado@linaro.org>

	* config/aarch64/aarch64-protos.h (cpu_prefetch_tune)
	<minimum_stride>: New const int field.
	* config/aarch64/aarch64.c (generic_prefetch_tune): Update to include
	minimum_stride field.
	(exynosm1_prefetch_tune): Likewise.
	(thunderxt88_prefetch_tune): Likewise.
	(thunderx_prefetch_tune): Likewise.
	(thunderx2t99_prefetch_tune): Likewise.
	(qdf24xx_prefetch_tune): Likewise. Set minimum_stride to 2048.
	(aarch64_override_options_internal): Update to set
	PARAM_PREFETCH_MINIMUM_STRIDE.
	* doc/invoke.texi (prefetch-minimum-stride): Document new option.
	* params.def (PARAM_PREFETCH_MINIMUM_STRIDE): New.
	* params.h (PARAM_PREFETCH_MINIMUM_STRIDE): Define.
	* tree-ssa-loop-prefetch.c (should_issue_prefetch_p): Return false if
	stride is constant and is below the minimum stride threshold.

2018-05-06  Jakub Jelinek  <jakub@redhat.com>

	PR c++/85659
	* cfgexpand.c (expand_asm_stmt): Don't create a temporary if
	the type is addressable.  Don't force op into register if it has
	BLKmode.

2018-05-05  Roland McGrath  <mcgrathr@google.com>

	PR other/77609
	* varasm.c (default_section_type_flags): Set SECTION_NOTYPE for
	any section for which we don't know a specific type it should have,
	regardless of name.  Previously this was done only for the exact
	names ".init_array", ".fini_array", and ".preinit_array".
	(default_elf_asm_named_section): Add comment about
	relationship with default_section_type_flags and SECTION_NOTYPE.
	(get_section): Don't consider it a type conflict if one side has
	SECTION_NOTYPE and the other doesn't, as long as neither has the
	SECTION_BSS et al used in the default_section_type_flags logic.

2018-05-05  Tom de Vries  <tom@codesourcery.com>

	PR target/85653
	* config/nvptx/nvptx.c (WORKAROUND_PTXJIT_BUG_3): Define.
	(workaround_barsyncs): New function.
	(nvptx_reorg): Use workaround_barsyncs.
	* config/nvptx/nvptx.md (define_c_enum "unspecv"): Add UNSPECV_MEMBAR.
	(define_expand "nvptx_membar_cta"): New define_expand.
	(define_insn "*nvptx_membar_cta"): New insn.

2018-05-04  Pekka Jääskeläinen  <pekka.jaaskelainen@parmance.com>

	* brig-builtins.def: Add consts to ptrs etc. in BRIG builtin defs.
	To improve optimization opportunities.
	* builtin-types.def: The new needed builtin types for the above.

2018-05-04  Richard Biener  <rguenther@suse.de>

	* bb-reorder.c (sanitize_hot_paths): Release hot_bbs_to_check.
	* gimple-ssa-store-merging.c
	(imm_store_chain_info::output_merged_store): Remove redundant create,
	release split_store vector contents on failure.
	* tree-vect-slp.c (vect_schedule_slp_instance): Avoid leaking
	scalar stmt vector on cache hit.

2018-05-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* common/config/rs6000/rs6000-common.c (rs6000_handle_option): Remove
	Xilinx FP support.
	* config.gcc (powerpc-xilinx-eabi*): Remove.
	* config/rs6000/predicates.md (easy_fp_constant): Remove Xilinx FP
	support.
	(fusion_addis_mem_combo_load): Ditto.
	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Remove Xilinx
	FP support.
	(rs6000_cpu_cpp_builtins): Ditto.
	* config/rs6000/rs6000-linux.c
	(rs6000_linux_float_exceptions_rounding_supported_p): Ditto.
	* config/rs6000/rs6000-opts.h (enum fpu_type_t): Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Remove Xilinx FP
	support.
	(rs6000_setup_reg_addr_masks): Ditto.
	(rs6000_init_hard_regno_mode_ok): Ditto.
	(rs6000_option_override_internal): Ditto.
	(legitimate_lo_sum_address_p): Ditto.
	(rs6000_legitimize_address): Ditto.
	(rs6000_legitimize_reload_address): Ditto.
	(rs6000_legitimate_address_p): Ditto.
	(abi_v4_pass_in_fpr): Ditto.
	(setup_incoming_varargs): Ditto.
	(rs6000_gimplify_va_arg): Ditto.
	(rs6000_split_multireg_move): Ditto.
	(rs6000_savres_strategy): Ditto.
	(rs6000_emit_prologue_components): Ditto.
	(rs6000_emit_epilogue_components): Ditto.
	(rs6000_emit_prologue): Ditto.
	(rs6000_emit_epilogue): Ditto.
	(rs6000_elf_file_end): Ditto.
	(rs6000_function_value): Ditto.
	(rs6000_libcall_value): Ditto.
	* config/rs6000/rs6000.h: Ditto.
	(TARGET_MINMAX_SF, TARGET_MINMAX_DF): Delete, merge to ...
	(TARGET_MINMAX): ... this.  New.
	(TARGET_SF_FPR, TARGET_DF_FPR, TARGET_SF_INSN, TARGET_DF_INSN): Delete.
	* config/rs6000/rs6000.md: Remove Xilinx FP support.
	(*movsi_internal1_single): Delete.
	* config/rs6000/rs6000.opt (msingle-float, mdouble-float, msimple-fpu,
	mfpu=, mxilinx-fpu): Delete.
	* config/rs6000/singlefp.h: Delete.
	* config/rs6000/sysv4.h: Remove Xilinx FP support.
	* config/rs6000/t-rs6000: Ditto.
	* config/rs6000/t-xilinx: Delete.
	* config/rs6000/titan.md: Adjust for fp_type removal.
	* config/rs6000/vsx.md: Remove Xilinx FP support.
	(VStype_simple): Delete.
	(VSfptype_simple, VSfptype_mul, VSfptype_div, VSfptype_sqrt): Delete.
	* config/rs6000/xfpu.h: Delete.
	* config/rs6000/xfpu.md: Delete.
	* config/rs6000/xilinx.h: Delete.
	* config/rs6000/xilinx.opt: Delete.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Remove
	-msingle-float, -mdouble-float, -msimple-fpu, -mfpu=, and -mxilinx-fpu.

2018-05-04  Tom de Vries  <tom@codesourcery.com>

	PR libgomp/85639
	* builtins.c (expand_builtin_goacc_parlevel_id_size): Handle null target
	if ignore == 0.

2018-05-04  Richard Biener  <rguenther@suse.de>

	PR middle-end/85627
	* tree-complex.c (update_complex_assignment): We are always in SSA form.
	(expand_complex_div_wide): Likewise.
	(expand_complex_operations_1): Likewise.
	(expand_complex_libcall): Preserve EH info of the original stmt.
	(tree_lower_complex): Handle removed blocks.
	* tree.c (build_common_builtin_nodes): Do not set ECF_NOTRHOW
	on complex multiplication and division libcall builtins.

2018-05-04  Richard Biener  <rguenther@suse.de>

	PR middle-end/85574
	* fold-const.c (negate_expr_p): Restrict negation of operand
	zero of a division to when we know that can happen without
	overflow.
	(fold_negate_expr_1): Likewise.

2018-05-04  Jakub Jelinek  <jakub@redhat.com>

	PR libstdc++/85466
	* real.h (real_nextafter): Declare.
	* real.c (real_nextafter): New function.
	* fold-const-call.c (fold_const_nextafter): New function.
	(fold_const_call_sss): Call it for CASE_CFN_NEXTAFTER and
	CASE_CFN_NEXTTOWARD.
	(fold_const_call_1): For CASE_CFN_NEXTTOWARD call fold_const_call_sss
	even when arg1_mode is different from arg0_mode.

2018-05-03  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Deprecated Features): Remove
	-ffriend-injection.
	(Backwards Compatibility): Likewise.
	* doc/invoke.texi (C++ Language Options): Likewise.
	(C++ Dialect Options): Likewise.

2018-05-03  Jakub Jelinek  <jakub@redhat.com>

	PR target/85530
	* config/i386/avx512fintrin.h (_mm512_mullox_epi64,
	_mm512_mask_mullox_epi64): New intrinsics.

2018-05-03  Tom de Vries  <tom@codesourcery.com>

	PR testsuite/85106
	* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
	dump files): Add offload-tree.

2018-05-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85615
	* tree-ssa-threadupdate.c (thread_block_1): Only allow exits
	to loops not nested in BBs loop father to avoid creating multi-entry
	loops.

2018-05-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR tree-optimization/70291
	* tree-complex.c (expand_complex_libcall): Add type, inplace_p
	arguments.  Change return type to tree.  Emit libcall as a new
	statement rather than replacing existing one when inplace_p is true.
	(expand_complex_multiplication_components): New function.
	(expand_complex_multiplication): Expand floating-point complex
	multiplication using the above.
	(expand_complex_division): Rename inner_type parameter to type.
	Update expand_complex_libcall call-site.
	(expand_complex_operations_1): Update expand_complex_multiplication
	and expand_complex_division call-sites.

2018-05-02  Jakub Jelinek  <jakub@redhat.com>

	PR target/85582
	* config/i386/i386.md (*ashl<dwi>3_doubleword_mask,
	*ashl<dwi>3_doubleword_mask_1, *<shift_insn><dwi>3_doubleword_mask,
	*<shift_insn><dwi>3_doubleword_mask_1): In condition require that
	the highest significant bit of the shift count mask is clear.  In
	check whether and[sq]i3 is needed verify that all significant bits
	of the shift count other than the highest are set.

2018-05-02  Tom de Vries  <tom@codesourcery.com>

	PR libgomp/82428
	* builtins.def (DEF_GOACC_BUILTIN_ONLY): Define.
	* omp-builtins.def (BUILT_IN_GOACC_PARLEVEL_ID)
	(BUILT_IN_GOACC_PARLEVEL_SIZE): New builtin.
	* builtins.c (expand_builtin_goacc_parlevel_id_size): New function.
	(expand_builtin): Call expand_builtin_goacc_parlevel_id_size.
	* doc/extend.texi (Other Builtins): Add __builtin_goacc_parlevel_id and
	__builtin_goacc_parlevel_size.

2018-05-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85597
	* tree-vect-stmts.c (vectorizable_operation): For ternary SLP
	do not use split vect_get_vec_defs call but call vect_get_slp_defs
	directly.

2018-05-02  Tom de Vries  <tom@codesourcery.com>

	PR testsuite/85106
	* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
	dump files): Add ltrans-tree.

2018-05-02  Tom de Vries  <tom@codesourcery.com>

	PR testsuite/85106
	* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
	dump files): Add wpa-ipa.

2018-05-02  Segher Boessenkool  <segher@kernel.crashing.org>

	* config.gcc (powerpc*-*-*): Remove paired.h.  Unsupport the
	powerpc*-*-linux*paired* target.
	* config/rs6000/750cl.h: Delete.
	* config/rs6000/paired.h: Delete.
	* config/rs6000/paired.md: Delete.
	* config/rs6000/predicates.md (easy_vector_constant): Remove paired
	float support.
	* config/rs6000/rs6000-builtin.def: Remove paired float support.
	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Update
	comment.  Remove paired float support.
	* config/rs6000/rs6000-modes.def: Remove V2SF and V2SI.
	* config/rs6000/rs6000-opts.h (enum rs6000_vector): Delete
	VECTOR_PAIRED.
	* config/rs6000/rs6000-protos.h (paired_expand_vector_init,
	paired_emit_vector_cond_expr, paired_expand_vector_move): Delete
	declarations.
	* config/rs6000/rs6000.c: Remove paired float support.
	(paired_expand_vector_init, paired_expand_vector_move,
	paired_emit_vector_compare, paired_emit_vector_cond_expr,
	(paired_expand_lv_builtin, paired_expand_stv_builtin,
	paired_expand_builtin, paired_expand_predicate_builtin,
	paired_init_builtins): Delete.
	* config/rs6000/rs6000.h: Remove paired float support.
	* config/rs6000/rs6000.md: Remove paired float support.
	(move_from_CR_ov_bit): Delete.
	* config/rs6000/rs6000.opt (mpaired): Delete.
	* config/rs6000/t-rs6000: Remove paired.md from MD_INCLUDES.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Delete -mpaired.

2018-05-02  Richard Biener  <rguenther@suse.de>

	PR middle-end/85567
	* gimplify.c (gimplify_save_expr): When in SSA form allow
	SAVE_EXPRs to compute to SSA vars.

2018-05-02  Jakub Jelinek  <jakub@redhat.com>

	PR target/85582
	* config/i386/i386.md (*ashl<dwi>3_doubleword_mask,
	*ashl<dwi>3_doubleword_mask_1, *<shift_insn><dwi>3_doubleword_mask,
	*<shift_insn><dwi>3_doubleword_mask_1): If and[sq]i3 is needed, don't
	clobber operands[2], instead use a new pseudo.  Formatting fixes.

2018-05-02  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/85586
	* tree-vect-data-refs.c (vect_analyze_data_ref_dependence): Only
	exit early for statements in the same group if the accesses are
	not strided.

2018-05-02  Tom de Vries  <tom@codesourcery.com>

	PR lto/85451
	* lto-wrapper.c (compile_offload_image): Add "could not find mkoffload"
	error message.

2018-05-01  Marc Glisse  <marc.glisse@inria.fr>

	PR tree-optimization/85143
	* match.pd (A<B&A<C): Extend to BIT_IOR_EXPR.

2018-05-01  Tom de Vries  <tom@codesourcery.com>

	PR lto/85451
	* config/nvptx/mkoffload.c (main): Suggest using -B in "offload compiler
	not found" error message.

2018-05-01  Tom de Vries  <tom@codesourcery.com>

	PR other/83786
	* vec.h	(VEC_ORDERED_REMOVE_IF, VEC_ORDERED_REMOVE_IF_FROM_TO): Define.
	* vec.c (test_ordered_remove_if): New function.
	(vec_c_tests): Call test_ordered_remove_if.
	* dwarf2cfi.c (connect_traces): Use VEC_ORDERED_REMOVE_IF_FROM_TO.
	* lto-streamer-out.c (prune_offload_funcs): Use VEC_ORDERED_REMOVE_IF.
	* tree-vect-patterns.c (vect_pattern_recog_1): Use
	VEC_ORDERED_REMOVE_IF.

2018-05-01  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/82665
	* vr-values.c (vr_values::extract_range_from_binary_expr): Handle
	pointer subtraction where arguments come from a memchr call.

2018-05-01  Jakub Jelinek  <jakub@redhat.com>

	* configure.ac (LD_AS_NEEDED_OPTION, LD_NO_AS_NEEDED_OPTION): Use
	--push-state --as-needed and --pop-state instead of --as-needed and
	--no-as-needed if ld supports it.
	* configure: Regenerated.

	PR web/85578
	* doc/install.texi2html: Replace _002d with - and _002a with * in
	generated html files using sed.

2018-04-30  David Malcolm  <dmalcolm@redhat.com>

	PR c++/85523
	* gcc-rich-location.c (blank_line_before_p): New function.
	(use_new_line): New function.
	(gcc_rich_location::add_fixit_insert_formatted): New function.
	* gcc-rich-location.h
	(gcc_rich_location::add_fixit_insert_formatted): New function.

2018-04-30  David Malcolm  <dmalcolm@redhat.com>

	* selftest.c (assert_streq): Rename "expected" and "actual" to
	"val1" and "val2".  Extend NULL-handling to cover both inputs
	symmetrically, while still requiring both to be non-NULL for a pass.
	* selftest.h (assert_streq): Rename "expected" and "actual" to
	"val1" and "val2".
	(ASSERT_EQ): Likewise.
	(ASSERT_EQ_AT): Likewise.
	(ASSERT_KNOWN_EQ): Likewise.
	(ASSERT_KNOWN_EQ_AT): Likewise.
	(ASSERT_NE): Likewise.
	(ASSERT_MAYBE_NE): Likewise.
	(ASSERT_MAYBE_NE_AT): Likewise.
	(ASSERT_STREQ): Likewise.  Clarify that both must be non-NULL for
	the assertion to pass.
	(ASSERT_STREQ_AT): Likewise.

2018-04-30  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (-fpie, -fPIE): Fix grammar and clarify
	interaction with -pie.

2018-04-30  David Malcolm  <dmalcolm@redhat.com>

	* selftest.h: Fix alphabetization of per-source-file selftest
	declarations.

2018-04-30  Jason Merrill  <jason@redhat.com>

	PR c++/61982 - dead stores to destroyed objects.
	* gimplify.c (gimplify_modify_expr): Simplify complex lvalue on LHS
	of clobber.

2018-04-30  Jason Merrill  <jason@redhat.com>

	* tree.c (build_clobber): New.
	* tree.h: Declare it.
	* gimplify.c (gimplify_bind_expr, gimplify_target_expr): Use it.

2018-04-30  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic-show-locus.c (layout::layout): Update for
	location_get_source_line returning a char_span.
	(struct char_span): Move to input.h.
	(struct correction): Update for fields in char_span becoming
	private.
	(struct source_line): Update for location_get_source_line
	returning a char_span.
	(layout::print_line): Likewise.
	* edit-context.c (edited_file::print_content): Likewise.
	(edited_file::print_diff_hunk): Likewise.
	(edited_file::print_run_of_changed_lines): Likewise.
	(edited_file::get_num_lines): Likewise.
	(edited_line::edited_line): Likewise.
	* final.c (asm_show_source): Likewise.
	* input.c (location_get_source_line): Convert return type
	from const char * to char_span, losing the final "line_len"
	param.
	(dump_location_info): Update for the above.
	(get_substring_ranges_for_loc): Likewise.  Use a char_span
	when handling the literal within the line.
	(test_reading_source_line): Update for location_get_source_line
	returning a char_span.
	* input.h (class char_span): Move here from
	diagnostic-show-locus.c, converting from a struct to a class.
	Make data members private.
	(char_span::operator bool): New.
	(char_span::length): New.
	(char_span::get_buffer): New.
	(char_span::operator[]): New.
	(char_span::subspan): Make const.
	(char_span::xstrdup): New.
	(location_get_source_line): Convert return type from const char *
	to char_span, losing the final "line_size" param.

2018-04-30  Jan Hubicka  <jh@suse.cz>

	* lto-wrapper.c (ltrans_priorities): New static var.
	(cmp_priority): New.
	(run_gcc): Read priorities and if doing parallel build order
	the Makefile by them.

2018-04-30  David Malcolm  <dmalcolm@redhat.com>

	* input.h (builtins_location_check): Convert to a STATIC_ASSERT.

2018-04-30  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (verify_address): Remove base argument, add
	flag whether to check TREE_ADDRESSABLE and do that.
	(verify_expr): Remove.
	(verify_types_in_gimple_reference): Add pieces from verify_expr.
	(verify_gimple_assign_single): Likewise.
	(verify_gimple_switch): Likewise.
	(verify_expr_location_1): Dereference tp once.  Add (disabled)
	piece from verify_expr.
	(verify_gimple_in_cfg): Do not call verify_expr on all ops.

2018-04-30  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/linux.h (CLEAR_INSN_CACHE): Define.

2018-04-30  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (prepare_extend_operands): Remove.
	(small_data_pattern): Likewise.
	(arc_rewrite_small_data): Likewise.
	* config/arc/arc.c (LEGITIMATE_SMALL_DATA_OFFSET_P): Remove.
	(LEGITIMATE_SMALL_DATA_ADDRESS_P): Likewise.
	(get_symbol_alignment): New function.
	(legitimate_small_data_address_p): Likewise.
	(legitimate_scaled_address): Update, call
	legitimate_small_data_address_p.
	(output_sdata): New static variable.
	(arc_print_operand): Update how we handle small data operands.
	(arc_print_operand_address): Likewise.
	(arc_legitimate_address_p): Update, use
	legitimate_small_data_address_p.
	(arc_rewrite_small_data_p): Remove.
	(arc_rewrite_small_data_1): Likewise.
	(arc_rewrite_small_data): Likewise.
	(small_data_pattern): Likewise.
	(compact_sda_memory_operand): Update to use
	legitimate_small_data_address_p and get_symbol_alignment.
	(prepare_move_operands): Don't rewite sdata pattern.
	(prepare_extend_operands): Remove.
	* config/arc/arc.md (zero_extendqihi2): Don't rewrite sdata
	pattern.
	(zero_extendqisi2): Likewise.
	(zero_extendhisi2): Likewise.
	(extendqihi2): Likewise.
	(extendqisi2): Likewise.
	(extendhisi2): Likewise.
	(addsi3): Likewise.
	(subsi3): Likewise.
	(andsi3): Likewise.
	* config/arc/constraints.md (Usd): Change it to memory constraint.

2018-04-30  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_split_move): Allow signed 6-bit constants
	as source of std instructions.
	* config/arc/arc.md (movsi_insn): Update pattern predicate to
	allow 6-bit constants as source for store instructions.
	(movdi_insn): Update instruction pattern to allow 6-bit constants
	as source for store instructions.

2018-04-30  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (-fdebug-types-section): Fix grammar.

2018-04-30  Nathan Sidwell  <nathan@acm.org>
	    Sandra Loosemore <sandra@codesourcery.com>

	* dumpfile.c (dump_open): Allow '-' for stdout.
	* doc/invoke.texi (Developer Options): Document dump filename
	determination early.  Document stdin/stdout selection.

2018-04-30  Andrew Sadek  <andrew.sadek.se@gmail.com>

	Microblaze Target: PIC data text relative

	* config/microblaze/microblaze.opt: add new option -mpic-data-text-rel.
	* config/microblaze/microblaze-protos.h (microblaze_constant_address_p):
	Add declaration.
	* config/microblaze/microblaze.h (microblaze_constant_address_p):
	CONSTANT_ADDRESS_P definition to microblaze_constant_address_p.
	* config/microblaze/microblaze.c (TARGET_PIC_DATA_TEXT_REL):
	New addressing mode for data-text relative position indepenedent code.
	(microblaze_classify_unspec): add 'UNSPEC_TEXT' case ->
	'ADDRESS_SYMBOLIC_TXT_REL'.
	(microblaze_classify_address): Add handling for UNSPEC + CONST_INT.
	(microblaze_legitimate_pic_operand): Exclude function calls from
	pic operands in case of TARGET_PIC_DATA_TEXT_REL option.
	(microblaze_legitimize_address): Generate 'UNSPEC_TEXT' for all possible
	addresses cases.
	(microblaze_address_insns): Add 'ADDRESS_SYMBOLIC_TXT_REL' case.
	(print_operand): Add 'ADDRESS_SYMBOLIC_TXT_REL' case.
	(print_operand_address): Add 'ADDRESS_SYMBOLIC_TXT_REL' case + handling
	for 'address + offset'.
	(microblaze_expand_prologue): Add new function prologue call for
	'r20' assignation.
	(microblaze_asm_generate_pic_addr_dif_vec): Override new target hook
	'TARGET_ASM_GENERATE_PIC_ADDR_DIFF_VEC' to disable address diff vector
	table in case of TARGET_PIC_DATA_TEXT_REL.
	(expand_pic_symbol_ref): Add handling for 'UNSPEC_TEXT'.
	* config/microblaze/microblaze.md (TARGET_PIC_DATA_TEXT_REL):
	Add new macros 'UNSPEC_TEXT',
	'UNSPEC_SET_TEXT' + add rule for setting r20 in function prologue
	+ exclude function calls from 'UNSPEC_PLT' in case of data text
	relative mode.
	* doc/tm.texi.in (TARGET_ASM_GENERATE_PIC_ADDR_DIFF_VEC): Add
	new target hook for generating address diff vector tables in case of
	flag_pic.
	* doc/tm.texi : Regenerate.
	* stmt.c (TARGET_ASM_GENERATE_PIC_ADDR_DIFF_VEC): Append new condition
	'targetm.asm_out.generate_pic_addr_diff_vec' to flag_pic in case
	of addr diff vector generation.
	* target.def (TARGET_ASM_GENERATE_PIC_ADDR_DIFF_VEC): Add
	target hook definition.
	* targhooks.h, targhooks.c (TARGET_ASM_GENERATE_PIC_ADDR_DIFF_VEC):
	Add default function for generate_pic_addr_diff_vec -> flag_pic.
	* doc/invoke.texi (Add new pic option): Add new microblaze pic
	option for data text relative.

2018-04-30  Richard Biener  <rguenther@suse.de>

	* tree-chrec.h (evolution_function_is_constant_p): Remove
	redundant check.
	* tree-cfg.c (tree_node_can_be_shared): Re-order checks.

2018-04-30  Richard Biener  <rguenther@suse.de>

	PR bootstrap/85571
	* dwarf2out.c (gen_producer_string): Ignore -fchecking[=].

2018-04-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/28364
	PR tree-optimization/85275
	* tree-ssa-loop-ch.c (ch_base::copy_headers): Stop after
	copying first exit test.

2018-04-28  Mark Wielaard  <mark@klomp.org>

	* dwarf2out.c (dwarf2out_finish): Add .debug_addr table header for
	dwarf_version >= 5.
	(dwarf_AT): Handle DW_AT_addr_base.
	(add_top_level_skeleton_die_attrs): Use dwarf_AT for DW_AT_addr_base.

2018-04-28  Uros Bizjak  <ubizjak@gmail.com>

	PR target/84431
	* config/i386/i386.md (*ashl<dwi>3_doubleword_mask): New pattern.
	(*ashl<dwi>3_doubleword_mask_1): Ditto.
	(*<shift_insn><dwi>3_doubleword_mask): Ditto.
	(*<shift_insn><dwi>3_doubleword_mask_1): Ditto.

2018-04-28  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (verify_gimple_phi): Take a gphi * argument.
	(verify_gimple_in_cfg): Rename visited_stmts to visited_throwing_stmts
	to reflect use.  Only add interesting stmts.

2018-04-27  Martin Jambor  <mjambor@suse.cz>

	PR ipa/85549
	* ipa-cp.c (find_aggregate_values_for_callers_subset): Make sure
	the jump function allows for passing through aggregate values.

2018-04-27  David Malcolm  <dmalcolm@redhat.com>

	* input.h (in_system_header_at): Convert from macro to inline
	function.
	(from_macro_expansion_at): Likewise.
	(from_macro_definition_at): Likewise.

2018-04-27  Jeff Law  <law@redhat.com>

	* config.gcc: Mark tile* targets as deprecated/obsolete.

2018-04-27  Richard Biener  <rguenther@suse.de>

	* config/aarch64/aarch64.c: Simplify ap.__stack advance and
	fix for ILP32.

2018-04-27  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (verify_expr): Make dead code hit gcc_unreachable.

2018-04-27  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*movti_internal): Substitute Ye constraint
	with Yd constraint. Set "preferred_for_speed" attribute from
	TARGET_INTER_UNIT_MOVES_{FROM,TO}_VEC for alternatives
	with Yd constraint.
	(*movdi_internal): Ditto.
	(movti_interunit splitters): Remove
	TARGET_INTER_UNIT_MOVES_{FROM,TO}_VEC from insn condition.
	(movdi_interunit splitters): Ditto.
	* config/i386/constraints.md (Ye): Remove.
	(Yd): Do not depend on TARGET_INTER_UNIT_MOVES_{FROM,TO}_VEC.

2018-04-27  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/85512
	* config/aarch64/constraints.md (Usg): Limit to 31.
	(Usj): Limit to 63.

2018-04-27  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/85529
	* tree-ssa-reassoc.c (optimize_range_tests_var_bound): Add FIRST_BB
	argument.  Don't call get_nonzero_bits if opcode is ERROR_MARK_NODE,
	rhs2 def stmt's bb is dominated by first_bb and it isn't an obvious
	zero extension or masking of the MSB bit.
	(optimize_range_tests): Add FIRST_BB argument, pass it through
	to optimize_range_tests_var_bound.
	(maybe_optimize_range_tests, reassociate_bb): Adjust
	optimize_range_tests callers.

2018-04-26  Richard Biener  <rguenther@suse.de>
	    Jakub Jelinek  <jakub@redhat.com>

	* cgraph.h (symbol_table): Just declare debug method here.
	* symtab.c (symbol_table::debug): Define.

2018-04-26  Eric Botcazou  <ebotcazou@adacore.com>

	* loop-invariant.c (may_assign_reg_p): Return false for frame pointer.

2018-04-26  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md ("isa" attribute): Add x64_sse2.
	("enabled" attribute): Handle x64_sse2 "isa" attribute.
	(*movdi_internal): Substitute Yi and Yj constraint with x
	and Ym and Yn constraint with y constraint.  Update "isa"
	attribute and set "preferred_for_speed" attribute from
	TARGET_INTER_UNIT_MOVES_{FROM,TO}_VEC for updated alternatives.
	(*movsi_internal): Ditto.
	(*movdf_internal): Ditto.
	(*movsf_internal): Ditto.
	(*zero_extendsidi2): Ditto.
	* config/i386/sse.md (vec_set<mode>_0): Ditto.
	(sse2_loadld): Ditto.
	(*vec_extract<ssevecmodelower>_0): Ditto.
	(*vec_extractv4si_0_zext_sse4): Ditto.
	(vec_concatv2di): Ditto.
	(*vec_dup<mode>): Ditto.
	* config/i386/mmx.md (*mov<mode>_internal): Ditto.
	* config/i386/constraints.md (Yi): Remove.
	(Yj): Remove.
	(Ym): Remove.
	(Yn): Remove.

2018-04-26  Nathan Sidwell  <nathan@acm.org>

	* dumpfile.c (dump_open): New.
	(dump_open_alternate_stream, dump_start, dump_begin): Call it.
	(dump_finish): Detect stdio/stderr by value not name.

2018-04-26  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (-Wreturn-type): Document default status for C++.

2018-04-26  Tom de Vries  <tom@codesourcery.com>

	PR target/84952
	* config/nvptx/nvptx.c (verify_neutering_jumps)
	(verify_neutering_labels): New function
	(nvptx_single): Use verify_neutering_jumps and verify_neutering_labels.

2018-04-26  Tom de Vries  <tom@codesourcery.com>

	PR target/84025
	* config/nvptx/nvptx.c (needs_neutering_p): New function.
	(nvptx_single): Use needs_neutering_p to skip over insns that do not
	need neutering.

2018-04-26  Richard Biener <rguenther@suse.de>
	    Tom de Vries  <tom@codesourcery.com>

	PR lto/85422
	* lto-streamer-out.c (output_function): Fixup loops if required to match
	discovery done in the reader.

2018-04-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85116
	* tree-ssa-loop-ch.c (do_while_loop_p): A do-while loop should
	have a loop exit from the single latch predecessor.  Remove
	case of header with just condition.
	(ch_base::copy_headers): Exclude infinite loops from any
	processing.
	(pass_ch::execute): Record exits.

2018-04-26  Richard Biener  <rguenther@suse.de>

	* tree-vect-data-refs.c (vect_get_data_access_cost): Get
	prologue cost vector and pass it to vect_get_load_cost.
	(vect_get_peeling_costs_all_drs): Likewise.
	(vect_peeling_hash_get_lowest_cost): Likewise.
	(vect_enhance_data_refs_alignment): Likewise.

2018-04-26  Richard Biener  <rguenther@suse.de>

	PR middle-end/85450
	* tree-cfg.c (verify_gimple_assign_unary): Restore proper
	checking of integer<->pointer conversions.
	* omp-expand.c (expand_omp_for_static_nochunk): Avoid
	sign-/zero-extending pointer types.
	(expand_omp_for_static_chunk): Likewise.

2018-03-22  Hans-Peter Nilsson  <hp@axis.com>
	    Jean Lee  <xiaoyur347@gmail.com>

	* config/mips/mips.c (mips_asan_shadow_offset): New function.
	(TARGET_ASAN_SHADOW_OFFSET): Define.
	* config/mips/mips.h (FRAME_GROWS_DOWNWARD): Augment to also be
	true for -fsanitize=address.

2018-04-25  Mark Wielaard  <mark@klomp.org>

	* dwarf2out.c (file_info_cmp): Sort longer dir prefixes before
	shorter ones.

2018-04-25  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/i386.md (*x86_mov<mode>cc_0_m1): Use type "alu1" rather
	than "alu", remove explicit "memory" and "imm_disp" attributes.
	(*x86_mov<mode>cc_0_m1_se, *x86_mov<mode>cc_0_m1_neg): Likewise.

	PR middle-end/85414
	* simplify-rtx.c (simplify_unary_operation_1) <case SIGN_EXTEND,
	case ZERO_EXTEND>: Pass SUBREG_REG (op) rather than op to
	gen_lowpart_no_emit.

2018-04-25  Sebastian Peryt  <sebastian.peryt@intel.com>

	PR target/85473
	* config/i386/i386.c (ix86_expand_builtin): Change memory
	operand to XI, extend p0 to Pmode.
	* config/i386/i386.md: Change unspec volatile and operand
	1 mode to XI, change operand 0 mode to P.

2018-04-25  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-predicates.c (nds32_can_use_bclr_p): Mask with
	GET_MODE_MASK before any checking.
	(nds32_can_use_bset_p): Likewise.
	(nds32_can_use_btgl_p): Likewise.

2018-04-25  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-doubleword.md: New define_split pattern for
	illegal register number.

2018-04-25  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_print_operand): Set op_value ealier.

2018-04-25  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (ASM_APP_ON): Add missing newline character.

2018-04-25  Richard Biener  <rguenther@suse.de>

	* lto-streamer.h (LTO_major_version): Bump to 8.

2018-04-25  Jakub Jelinek  <jakub@redhat.com>

	* BASE-VER: Set to 9.0.0.

2018-04-24  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (init_float128_ieee): Fix spelling mistakes
	in __abskf2 and __powikf2.

2018-04-24  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/85512
	* config/aarch64/constraints.md (Usg, Usj): New constraints.
	* config/aarch64/iterators.md (cmode_simd): New mode attribute.
	* config/aarch64/aarch64.md (*aarch64_ashr_sisd_or_int_<mode>3):
	Use the above on operand 2.  Reindent.
	(*aarch64_lshr_sisd_or_int_<mode>3): Likewise.

2018-04-24  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85485
	* common/config/i386/i386-common.c (ix86_handle_option): Don't
	handle OPT_mcet.
	* config/i386/i386.opt (mcet): Removed.
	* doc/install.texi: Remove -mcet documentation.
	* doc/invoke.texi: Likewise.

2018-04-24  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85485
	* doc/install.texi: Remove -mcet from bootstrap-cet.

2018-04-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/85511
	* config/i386/i386.c (ix86_init_mmx_sse_builtins): Don't define
	__builtin_ia32_readeflags_u32 and __builtin_ia32_writeeflags_u32
	if TARGET_64BIT.

	PR target/85503
	* config/rs6000/rs6000-p8swap.c (const_load_sequence_p): Punt if
	const_vector is not CONST_VECTOR or SYMBOL_REF for a constant pool
	containing a CONST_VECTOR.

2018-04-24  Cesar Philippidis  <cesar@codesourcery.com>

	* doc/install.texi: Update newlib dependency for nvptx.

2018-04-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/85508
	* config/i386/i386.c (ix86_expand_vector_init_one_var): Use UINTVAL
	instead of INTVAL when shifting x left.

2018-04-24  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR tree-optimization/85478
	* tree-vect-loop.c (vect_analyze_loop_2): Do not call
	vect_grouped_store_supported for single element vectors.

2018-04-24  Richard Biener  <rguenther@suse.de>

	PR target/85491
	* config/i386/i386.c (ix86_add_stmt_cost): Restrict strided
	load cost increase to the case of non-constant step.

2018-04-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/84828
	* reg-stack.c (move_for_stack_reg): Don't fail assertion about dead
	destination if any_malformed_asm.

2018-04-23  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/85496
	* expr.c (store_field): In the bitfield case, if the value comes from
	a function call and is returned in registers by means of a PARALLEL,
	do not change the mode of the temporary unless BLKmode and VOIDmode.

2018-04-23  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/85423
	* sel-sched-ir.c (has_dependence_note_mem_dep): Only discard
	dependencies to debug insns when the previous insn is non-debug.

2018-04-23  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md ("vunspec"): Delete it, unify all the unspec
	enums into a single definition.
	(fls): Fix predicates and printing.
	(seti): Likewise.

2018-04-23  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (check_if_valid_sleep_operand): Remove.
	* config/arc/arc.c (arc_expand_builtin): Sleep accepts registers
	and short u6 immediate.
	(check_if_valid_sleep_operand): Remove.
	* config/arc/arc.md (Sleep): Accepts registers and u6 immediates.

2018-04-22  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_compute_stack_frame): Consider
	flag_always_save_lp condition.
	* config/nds32/nds32.opt (malways-save-lp): New option.

2018-04-22  Shiva Chen  <shiva0217@gmail.com>

	* config/nds32/nds32-protos.h (nds32_use_load_post_increment): Declare.
	* config/nds32/nds32.c (nds32_use_load_post_increment): New.
	* config/nds32/nds32.h
	(USE_LOAD_POST_INCREMENT, USE_LOAD_POST_DECREMENT): Define.
	(USE_STORE_POST_INCREMENT, USE_STORE_POST_DECREMENT): Define.

2018-04-22  Shiva Chen  <shiva0217@gmail.com>

	* config/nds32/nds32-protos.h (nds32_ls_333_p): Remove.
	* config/nds32/nds32.c (nds32_ls_333_p): Remove.

2018-04-22  Shiva Chen  <shiva0217@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-protos.h (nds32_case_vector_shorten_mode):
	Declare.
	* config/nds32/nds32.c (nds32_case_vector_shorten_mode): New function.
	* config/nds32/nds32.h (CASE_VECTOR_SHORTEN_MODE): Modify.

2018-04-22  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_compute_stack_frame): Fix wrong value.

2018-04-22  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-protos.h (nds32_data_alignment,
	nds32_local_alignment): Declare.
	* config/nds32/nds32.c (nds32_data_alignment, nds32_constant_alignment,
	nds32_local_alignment): New functions.
	(TARGET_CONSTANT_ALIGNMENT): Define.
	* config/nds32/nds32.h (DATA_ALIGNMENT, LOCAL_ALIGNMENT): Define.

2018-04-22  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c
	(TARGET_HARD_REGNO_MODE_OK): Move to the bottom of file.
	(TARGET_MODES_TIEABLE_P): Likewise.

2018-04-22  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_asm_file_start): Display optimization
	level Ofast and Og.

2018-04-22  Monk Chiang  <sh.chiang04@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add enum values
	for unaligned access.
	* config/nds32/nds32-intrinsic.c: Implementation of expanding
	unaligned access.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32.h (nds32_builtins): Likewise.
	* config/nds32/nds32.opt (munaligned-access): New option.
	* config/nds32/nds32.c (nds32_asm_file_start): Display
	flag_unaligned_access status.

2018-04-20  Kito Cheng  <kito.cheng@gmail.com>

	* config/riscv/elf.h (LINK_SPEC): Pass --no-relax if
	-mno-relax is present.
	* config/riscv/linux.h (LINK_SPEC): Ditto.

2018-04-20  Martin Sebor  <msebor@redhat.com>

	PR c/85365
	* gimple-fold.c (gimple_fold_builtin_strcpy): Suppress -Wrestrict
	for null pointers.
	(gimple_fold_builtin_stxcpy_chk): Same.
	* gimple-ssa-warn-restrict.c (check_bounds_or_overlap): Same.

2018-04-20  Michael Meissner  <meissner@linux.ibm.com>

	PR target/85456
	* config/rs6000/rs6000.c (init_float128_ieee): Add support to call
	__powikf2 when long double is IEEE 128-bit.

2018-04-20  Kito Cheng  <kito.cheng@gmail.com>

	* config/riscv/riscv.c (riscv_first_stack_step): Round up min
	step to make sure stack always aligned.

2018-04-20  Carl Love  <cel@us.ibm.com>

	PR target/83402
	* config/rs6000/rs6000-c.c (rs6000_gimple_fold_builtin): Add
	size check for arg0.

2018-04-20  Nathan Sidwell  <nathan@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	PR target/85445
	* config/nvptx/nvptx.c (nvptx_emit_forking, nvptx_emit_joining):
	Emit insns for calls too.
	(nvptx_find_par): Always look for worker-level predecessor insn.
	(nvptx_propagate): Add is_call parm, return bool.  Copy frame for
	calls.
	(nvptx_vpropagate, nvptx_wpropagate): Adjust.
	(nvptx_process_pars): Propagate frames for calls.

2018-04-20  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85469
	* common/config/i386/i386-common.c (OPTION_MASK_ISA_IBT_SET):
	Removed.
	(OPTION_MASK_ISA_IBT_UNSET): Likewise.
	(ix86_handle_option): Don't handle OPT_mibt.
	* config/i386/cet.h: Check __CET__ instead of __IBT__ and
	__SHSTK__.
	* config/i386/driver-i386.c (host_detect_local_cpu): Remove
	has_ibt and ibt.
	* config/i386/i386-c.c (ix86_target_macros_internal): Don't
	check OPTION_MASK_ISA_IBT nor flag_cf_protection.
	(ix86_target_macros): Define __CET__ with flag_cf_protection
	for -fcf-protection.
	* config/i386/i386.c (isa2_opts): Remove -mibt.
	* config/i386/i386.h (TARGET_IBT): Removed.
	(TARGET_IBT_P): Likewise.
	(ix86_valid_target_attribute_inner_p): Don't check OPT_mibt.
	* config/i386/i386.md (nop_endbr): Don't check TARGET_IBT.
	* config/i386/i386.opt (mcet): Update help message.
	(mshstk): Likewise.
	(mibt): Removed.
	* doc/invoke.texi: Remove -mibt.  Document __CET__.  Document
	-mcet as an alias for -mshstk.

2018-04-20  Richard Biener <rguenther@suse.de>

	PR middle-end/85475
	* match.pd ((X * CST) * Y -> (X * Y) * CST): Avoid exponential
	complexity by forcing a single use of the multiply operand.

2018-04-20  Martin Jambor  <mjambor@suse.cz>

	ipa/85449
	* ipa-cp.c (cgraph_edge_brings_value_p): Move check for self-feeding
	recursion dependency to only apply to non-clones.

2018-04-20  Martin Jambor  <mjambor@suse.cz>

	ipa/85447
	* ipa-cp.c (create_specialized_node): Check that clones of
	self-recursive edges exist during IPA-CP.

2018-04-19  Toon Moene  <toon@moene.org>

	* doc/invoke.texi: Add -floop-unroll-and-jam to options enabled
	by -O3.

2018-04-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/85467
	* fold-const.c (fold_ternary_loc) <case BIT_FIELD_REF>: Use
	VECTOR_TYPE_P macro.  If type is vector type, VIEW_CONVERT_EXPR the
	VECTOR_CST element to type.

2018-04-19  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85397
	* config/i386/i386.h (STACK_SAVEAREA_MODE): New.
	* config/i386/i386.md (builtin_setjmp_setup): Removed.
	(builtin_longjmp): Likewise.
	(save_stack_nonlocal): New pattern.
	(restore_stack_nonlocal): Likewise.

2018-04-19  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85404
	* config/i386/cet.c (file_end_indicate_exec_stack_and_cet):
	Replace ASM_OUTPUT_LABEL with fprintf.

2018-04-19  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85417
	* config/i386/cet.c (file_end_indicate_exec_stack_and_cet):
	Check flag_cf_protection instead of TARGET_IBT and TARGET_SHSTK.
	* config/i386/i386-c.c (ix86_target_macros_internal): Also
	define __IBT__ and __SHSTK__ for -fcf-protection.
	* config/i386/i386.c (pass_insert_endbranch::gate): Don't check
	TARGET_IBT.
	(ix86_trampoline_init): Likewise.
	(x86_output_mi_thunk): Likewise.
	(ix86_notrack_prefixed_insn_p): Likewise.
	(ix86_option_override_internal): Don't disallow -fcf-protection.
	* config/i386/i386.md (rdssp<mode>): Also enable for
	-fcf-protection.
	(incssp<mode>): Likewise.
	(nop_endbr): Likewise.
	* config/i386/i386.opt (mcet): Change help message to built-in
	functions only.
	(mibt): Likewise.
	(mshstk): Likewise.
	* doc/invoke.texi: Remove -mcet, -mibt and -mshstk condition
	on -fcf-protection.  Change -mcet, -mibt and -mshstk to only
	enable CET built-in functions.

2018-04-19  Sebastian Peryt  <sebastian.peryt@intel.com>

	* common/config/i386/i386-common.c
	(OPTION_MASK_ISA_MOVDIRI_SET, OPTION_MASK_ISA_MOVDIR64B_SET,
	OPTION_MASK_ISA_MOVDIRI_UNSET,
	OPTION_MASK_ISA_MOVDIR64B_UNSET): New defines.
	(ix86_handle_option): Handle -mmovdiri and -mmovdir64b.
	* config.gcc (movdirintrin.h): New header.
	* config/i386/cpuid.h (bit_MOVDIRI,
	bit_MOVDIR64B): New bits.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect -mmovdiri
	and -mmvodir64b.
	* config/i386/i386-builtin-types.def ((VOID, PUNSIGNED, UNSIGNED),
	(VOID, PVOID, PCVOID)): New function types.
	* config/i386/i386-builtin.def (__builtin_ia32_directstoreu_u32,
	__builtin_ia32_directstoreu_u64,
	__builtin_ia32_movdir64b): New builtins.
	* config/i386/i386-c.c (__MOVDIRI__, __MOVDIR64B__): New.
	* config/i386/i386.c (ix86_target_string): Added -mmovdir64b
	and -mmovdiri.
	(ix86_valid_target_attribute_inner_p): Ditto.
	(ix86_expand_special_args_builtin): Added VOID_FTYPE_PUNSIGNED_UNSIGNED
	and VOID_FTYPE_PUNSIGNED_UNSIGNED.
	(ix86_expand_builtin): Expand IX86_BUILTIN_MOVDIR64B.
	* config/i386/i386.h (TARGET_MOVDIRI, TARGET_MOVDIRI_P,
	TARGET_MOVDIR64B, TARGET_MOVDIR64B_P): New.
	* config/i386/i386.md (UNSPECV_MOVDIRI, UNSPECV_MOVDIR64B): New.
	(movdiri<mode>, movdir64b_<mode>): New.
	* config/i386/i386.opt: Add -mmovdiri and -mmovdir64b.
	* config/i386/immintrin.h: Include movdirintrin.h.
	* config/i386/movdirintrin.h: New file.
	* doc/invoke.texi: Added -mmovdiri and -mmovdir64b.

2018-04-19  Richard Biener  <rguenther@suse.de>

	PR middle-end/85455
	* cfg.c (clear_bb_flags): When loop state says we have
	marked irreducible regions also preserve BB_IRREDUCIBLE_LOOP.

2018-04-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84737
	* tree-vect-data-refs.c (vect_copy_ref_info): New function
	copying restrict info.
	(vect_setup_realignment): Use it.
	* tree-vectorizer.h (vect_copy_ref_info): Declare.
	* tree-vect-stmts.c (vectorizable_store): Copy ref info from
	the first DR to all generated stores.
	(vectorizable_load): Likewise for loads.

2018-04-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/85446
	* match.pd ((intptr_t) x eq/ne CST to x eq/ne (typeof x) cst): Require
	the integral and pointer types to have the same precision.

	* doc/install.texi: Document --disable-cet being the default and
	--enable-cet=auto.

2018-04-18  Martin Liska  <mliska@suse.cz>

	* ipa-devirt.c (odr_subtypes_equivalent_p): Fix GNU coding
	style.

2018-04-18  Martin Liska  <mliska@suse.cz>

	Revert
	2018-03-02  Eric Botcazou  <ebotcazou@adacore.com>

	PR ipa/83983
	* ipa-devirt.c (odr_subtypes_equivalent_p): Get the ODR type of both
	arguments if they are comparable.

2018-04-18  Martin Liska  <mliska@suse.cz>

	Revert
	2018-03-13  Eric Botcazou  <ebotcazou@adacore.com>

	PR lto/84805
	* ipa-devirt.c (odr_subtypes_equivalent_p): Do not get the ODR type of
	incomplete types.

2018-04-18  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85388
	* config/i386/i386.c (ix86_expand_split_stack_prologue): Insert
	ENDBR after calling __morestack.

2018-04-18  David Malcolm  <dmalcolm@redhat.com>

	PR jit/85384
	* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
	by using gcc_base_ver to generate a gcc_driver_version, and use
	it when generating GCC_DRIVER_NAME.
	* configure: Regenerate.

2018-04-18  Jakub Jelinek  <jakub@redhat.com>

	PR target/81084
	* config.gcc: Obsolete powerpc*-*-*spe*.

2018-04-17  Jakub Jelinek  <jakub@redhat.com>

	PR debug/84637
	* dbxout.c (dbxout_int): Perform negation in unsigned int type.
	(stabstr_D): Change type of unum from unsigned int to
	unsigned HOST_WIDE_INT.  Perform negation in unsigned HOST_WIDE_INT
	type.

2018-04-17  Jim Wilson  <jimw@sifive.com>

	PR 84856
	* config/riscv/riscv.c (riscv_compute_frame_info): Add calls to
	RISCV_STACK_ALIGN when using outgoing_args_size and pretend_args_size.
	Set arg_pointer_offset after using pretend_args_size.

2018-04-17  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/85431
	* dse.c (record_store): Ignore zero width stores.

	PR sanitizer/85230
	* asan.c (handle_builtin_stack_restore): Adjust comment.  Emit
	__asan_allocas_unpoison call and last_alloca_addr = new_sp before
	__builtin_stack_restore rather than after it.
	* builtins.c (expand_asan_emit_allocas_unpoison): Pass
	arg1 + (virtual_dynamic_stack_rtx - stack_pointer_rtx) as second
	argument instead of virtual_dynamic_stack_rtx.

2018-04-17  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-protos.h (rs6000_builtin_is_supported_p):
	New prototype.
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
	Add note to error message to explain internal mapping of overloaded
	built-in function name to non-overloaded built-in function name.
	* config/rs6000/rs6000.c (rs6000_builtin_is_supported_p): New
	function.

2018-04-17  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/85424
	* config/rs6000/rs6000.md (pack<mode>): Do not try handle a pack
	where the inputs overlap with the output.

2018-04-17  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/sse.md (vec_extract_lo_<mode><mask_name>): Add
	(=v, v) alternative and explicit "memory" attribute.
	(vec_extract_lo_<mode><mask_name>): Likewise.  Also add
	"type", "prefix", "prefix_extra", "length_immediate" and "mode"
	attributes.
	(vec_extract_lo_<mode><mask_name>): Add (=v, v) alternative and use
	"sselog1" type instead of "sselog".
	(vec_extract_hi_<mode><mask_name>): Use "sselog1" type instead of
	"sselog".  Remove explicit "memory" attribute.
	(vec_extract_lo_v32hi): Add (=v, v) alternative and explicit "memory",
	"type", "prefix", "prefix_extra", "length_immediate" and "mode"
	attributes.
	(vec_extract_hi_v32hi): Merge all alternatives into one, use
	"sselog1" type instead of "sselog".  Remove explicit "memory"
	attribute.
	(vec_extract_hi_v16hi): Merge each pair of alternatives into one,
	use "sselog1" type instead of "sselog".  Remove explicit "memory"
	attribute.
	(vec_extract_lo_v64qi): Add (=v, v) alternative and explicit "memory",
	"type", "prefix", "prefix_extra", "length_immediate" and "mode"
	attributes.
	(vec_extract_hi_v64qi): Merge all alternatives into one, use
	"sselog1" type instead of "sselog".  Remove explicit "memory"
	attribute.
	(vec_extract_hi_v32qi): Merge each pair of alternatives into one,
	use "sselog1" type instead of "sselog".  Remove explicit "memory"
	attribute.

	PR target/85430
	* config/i386/i386.md (*ashlqi3_1_slp): Use alu1 type instead of alu.

	PR middle-end/85414
	* rtlhooks.c (gen_lowpart_if_possible): Don't call gen_lowpart_SUBREG
	on a SUBREG.

2018-04-17  Martin Jambor  <mjambor@suse.cz>

	PR ipa/85421
	* ipa-cp.c (create_specialized_node): Call
	expand_all_artificial_thunks if necessary.

2018-04-17  Martin Liska  <mliska@suse.cz>

	PR lto/85405
	* ipa-devirt.c (odr_types_equivalent_p): Remove trailing
	in message, remote space in between '_G' and '('.

2018-04-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/85281
	* config/i386/sse.md (reduces<mode><mask_scalar_name>,
	avx512f_vmcmp<mode>3<round_saeonly_name>,
	avx512f_vmcmp<mode>3_mask<round_saeonly_name>,
	avx512f_sgetexp<mode><mask_scalar_name><round_saeonly_scalar_name>,
	avx512f_rndscale<mode><round_saeonly_name>,
	avx512dq_ranges<mode><mask_scalar_name><round_saeonly_scalar_name>,
	avx512f_vgetmant<mode><mask_scalar_name><round_saeonly_scalar_name>):
	Use %<iptr>2 instead of %2 for -masm=intel.
	(avx512f_vcvtss2usi<round_name>, avx512f_vcvtss2usiq<round_name>,
	avx512f_vcvttss2usi<round_saeonly_name>,
	avx512f_vcvttss2usiq<round_saeonly_name>): Use %k1 instead of %1 for
	-masm=intel.
	(avx512f_vcvtsd2usi<round_name>, avx512f_vcvtsd2usiq<round_name>,
	avx512f_vcvttsd2usi<round_saeonly_name>,
	avx512f_vcvttsd2usiq<round_saeonly_name>, ufloatv2siv2df2<mask_name>):
	Use %q1 instead of %1 for -masm=intel.
	(avx512f_sfixupimm<mode><sd_maskz_name><round_saeonly_name>,
	avx512f_sfixupimm<mode>_mask<round_saeonly_name>): Use %<iptr>3 instead
	of %3 for -masm=intel.
	(sse2_shufpd_v2df_mask): Fix a typo, change %{6%} to %{%6%} for
	-masm=intel.
	(*avx512vl_<code>v2div2qi2_store): Use %w0 instead of %0 for
	-masm=intel.
	(*avx512vl_<code><mode>v4qi2_store): Use %k0 instead of %0 for
	-masm=intel.
	(avx512vl_<code><mode>v4qi2_mask_store): Use a single pattern with
	%k0 and %1 for -masm=intel rather than two patterns, one with %0 and
	%g1.
	(*avx512vl_<code><mode>v8qi2_store): Use %q0 instead of %0 for
	-masm=intel.
	(avx512vl_<code><mode>v8qi2_mask_store): Use a single pattern with
	%q0 and %1 for -masm=intel rather than two patterns, one with %0 and
	%g1 and one with %0 and %1.
	(avx512er_vmrcp28<mode><round_saeonly_name>,
	avx512er_vmrsqrt28<mode><round_saeonly_name>): Use %<iptr>1 instead of
	%1 for -masm=intel.
	(avx5124fmaddps_4fmaddps_mask, avx5124fmaddps_4fmaddss_mask,
	avx5124fmaddps_4fnmaddps_mask, avx5124fmaddps_4fnmaddss_mask,
	avx5124vnniw_vp4dpwssd_mask, avx5124vnniw_vp4dpwssds_mask): Swap order
	of %0 and %{%4%} for -masm=intel.
	(avx5124fmaddps_4fmaddps_maskz, avx5124fmaddps_4fmaddss_maskz,
	avx5124fmaddps_4fnmaddps_maskz, avx5124fmaddps_4fnmaddss_maskz,
	avx5124vnniw_vp4dpwssd_maskz, avx5124vnniw_vp4dpwssds_maskz): Swap
	order of %0 and %{%5%}%{z%} for -masm=intel.

2018-04-17  Jan Hubicka  <jh@suse.cz>

	PR lto/85405
	* ipa-devirt.c (odr_types_equivalent_p): Handle bit fields.

2018-04-17  Martin Liska  <mliska@suse.cz>

	PR ipa/85329
	* multiple_target.c (create_dispatcher_calls): Set apostrophes
	for target_clone error message.  Make default implementation
	clone to be a local declaration.
	(separate_attrs): Add new argument and check for an empty
	string.
	(expand_target_clones): Handle it.
	(ipa_target_clone): Make redirection just for target_clones
	functions.

2018-04-16  Cesar Philippidis  <cesar@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	PR middle-end/84955
	* omp-expand.c (expand_oacc_for): Add dummy false branch for
	tiled basic blocks without omp continue statements.

2018-04-16  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/83660
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin): Mark
	vec_extract expression as having side effects to make sure it gets
	a cleanup point.

2018-04-16  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85403
	* config/i386/i386.c (get_builtin_code_for_version): Check
	error_mark_node.

2018-04-16  Olga Makhotina  <olga.makhotina@intel.com>

	PR target/84331
	* config.gcc: Support "skylake".
	* config/i386/i386-c.c (ix86_target_macros_internal): Handle
	PROCESSOR_SKYLAKE.
	* config/i386/i386.c (m_SKYLAKE): Define.
	(processor_target_table): Add "skylake".
	(ix86_option_override_internal): Add "skylake".
	(get_builtin_code_for_version): Handle PROCESSOR_SKYLAKE,
	PROCESSOR_CANNONLAKE.
	(get_builtin_code_for_version): Fix priority for
	PROCESSOR_ICELAKE_CLIENT, PROCESSOR_ICELAKE_SERVER,
	PROCESSOR_SKYLAKE-AVX512.
	* config/i386/i386.h (processor_costs): Define TARGET_SKYLAKE.
	(processor_type): Add PROCESSOR_SKYLAKE.

2018-04-16  Paolo Carlini  <paolo.carlini@oracle.com>
	    Jason Merrill  <jason@redhat.com>

	PR c++/85112
	* convert.c (convert_to_integer_1): Use direct recursion for
	enumeral types and types with a precision less than the number
	of bits in their mode.

2018-04-16  Julia Koval  <julia.koval@intel.com>

	PR target/84413
	* config/i386/x86-tune.def (X86_TUNE_SSE_UNALIGNED_LOAD_OPTIMAL,
	X86_TUNE_SSE_UNALIGNED_STORE_OPTIMAL): Add m_SKYLAKE_AVX512

2018-04-14  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/85293
	* config/rs6000/rs6000.opt (mdirect-move): Make deprecated.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Remove -mdirect-move
	and -mno-direct-move.

2018-04-13  Paul A. Clarke  <pc@us.ibm.com>

	PR target/83402
	* config/rs6000/emmintrin.h (_mm_slli_epi{16,32,64}):
	Ensure that vec_splat_s32 is only called with 0 <= shift < 16.
	Ensure negative shifts result in {0}.

2018-04-13  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/79916
	* config/rs6000/rs6000.c (rs6000_emit_move): Use assigned hard
	regs (if any) to define how to gnerate SD moves when LRA is in
	progress.

2018-04-13  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/85393
	* except.h (expand_dw2_landing_pad_for_region): Remove declaration.
	* except.c (expand_dw2_landing_pad_for_region): Make static.
	* bb-reorder.c (fix_up_crossing_landing_pad): In new_bb emit just
	a label and unconditional jump to old_bb, rather than
	expand_dw2_landing_pad_for_region insn(s) and jump to single_succ
	basic block.

	PR rtl-optimization/85376
	* simplify-rtx.c (simplify_const_unary_operation): For CLZ and CTZ and
	zero op0, if C?Z_DEFINED_VALUE_AT_ZERO is false, return NULL_RTX
	instead of a specific value.

2018-04-13  Jan Hubicka  <hubicka@ucw.cz>
	    Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/82965
	PR tree-optimization/83991
	* cfgloopanal.c (expected_loop_iterations_unbounded): Add
	by_profile_only parameter.
	* cfgloopmanip.c (scale_loop_profile): Further scale loop's profile
	information if the loop was predicted to iterate too many times.
	* cfgloop.h (expected_loop_iterations_unbounded): Update prototype

2018-04-13  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/71991
	* config/i386/i386.c (ix86_can_inline_p): Allow safe transitions for
	always inline.

2018-04-13  Martin Liska  <mliska@suse.cz>
	    Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/81657
	* expr.h (enum block_op_methods): Add BLOCK_OP_NO_LIBCALL_RET.
	* expr.c (emit_block_move_hints): Handle BLOCK_OP_NO_LIBCALL_RET.
	* builtins.c (expand_builtin_memory_copy_args): Use
	BLOCK_OP_NO_LIBCALL_RET method for mempcpy with non-ignored target,
	handle dest_addr == pc_rtx.

2018-04-12  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/85291
	* config/rs6000/rs6000.md (fix_trunc<mode>si2): Use legacy code if
	asked to not generate direct moves.
	(fix_trunc<mode>si2_stfiwx): Similar.
	(fix_trunc<mode>si2_internal): Similar.

2018-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83157
	* var-tracking.c (add_stores): Handle STRICT_LOW_PART SET_DEST.
	* cselib.c (cselib_record_sets): For STRICT_LOW_PART dest,
	lookup if dest in some wider mode is known to be const0_rtx and
	if so, record permanent equivalence for it to be ZERO_EXTEND of
	the narrower mode destination.

2018-04-12  Cesar Philippidis  <cesar@codesourcery.com>

	* lto-streamer-out.c (output_function): Revert 259346.
	* omp-expand.c (expand_oacc_for): Likewise.

2018-04-12  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/85354
	* sel-sched-ir.c (sel_init_pipelining): Move cfg_cleanup call...
	* sel-sched.c (sel_global_init): ... here.

2018-04-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/85238
	* lto-wrapper.c (debug_objcopy): Open the files in binary mode.
	* dwarf2out.c (dwarf2out_early_finish): Do not generate assembly in LTO
	mode for PE-COFF targets.
	* config/i386/i386-protos.h (i386_pe_asm_lto_start): Declare.
	(i386_pe_asm_lto_end): Likewise.
	* config/i386/cygming.h (TARGET_ASM_LTO_START): Define.
	(TARGET_ASM_LTO_END): Likewise.
	* config/i386/winnt.c (saved_debug_info_level): New static variable.
	(i386_pe_asm_lto_start): New function.
	(i386_pe_asm_lto_end): Likewise.

2018-04-12  Cesar Philippidis  <cesar@codesourcery.com>
	    Richard Biener  <rguenther@suse.de>

	PR middle-end/84955
	* lto-streamer-out.c (output_function): Fix CFG loop state before
	streaming out.
	* omp-expand.c (expand_oacc_for): Handle calls to internal
	functions like regular functions.

2018-04-12  Richard Biener  <rguenther@suse.de>

	PR lto/85371
	* dwarf2out.c (init_sections_and_labels): Use debug_line_section[_label]
	for the early LTO debug to properly generate references to it
	during DIE emission.  Do not re-use that for the skeleton for
	split-dwarf.
	(dwarf2out_early_finish): Likewise.

2018-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/85328
	* config/i386/sse.md
	(<mask_codefor>avx512dq_vextract<shuffletype>64x2_1<mask_name> split,
	<mask_codefor>avx512f_vextract<shuffletype>32x4_1<mask_name> split,
	vec_extract_lo_<mode><mask_name> split, vec_extract_lo_v32hi,
	vec_extract_lo_v64qi): For non-AVX512VL if input is xmm16+ reg
	and output is a reg, avoid creating invalid lowpart subreg, but
	instead split into a 512-bit move.  Don't split if not AVX512VL,
	input is xmm16+ reg and output is a mem.
	(vec_extract_lo_<mode><mask_name>, vec_extract_lo_v32hi,
	vec_extract_lo_v64qi): Don't require split if not AVX512VL, input is
	xmm16+ reg and output is a mem.

2018-04-12  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* config/s390/s390.c (s390_output_indirect_thunk_function): Check
	also for flag_dwarf2_cfi_asm.

2018-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/85342
	* regcprop.c (copyprop_hardreg_forward_1): Remove replaced array, use
	a bool scalar var inside of the loop instead.  Don't try to update
	recog_data.operand after failed apply_change_group.

2018-04-12  Tom de Vries  <tom@codesourcery.com>

	PR target/85296
	* config/nvptx/nvptx.c (flexible_array_member_type_p): New function.
	(nvptx_assemble_decl_begin): Add undefined param.  Declare undefined
	array with flexible array member as array without given dimension.
	(nvptx_assemble_undefined_decl): Set nvptx_assemble_decl_begin call
	argument for undefined param to true.

2018-04-11  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/85321
	* doc/invoke.texi (RS/6000 and PowerPC Options): Document options
	-mcall- and -mtraceback=. Remove options -mabi=spe and -mabi=no-spe
	from PowerPC section.
	* config/rs6000/sysv4.opt (mcall-): Improve help text.
	* config/rs6000/rs6000.opt (mblock-compare-inline-limit=): Trim
	help text that is too long.
	* config/rs6000/rs6000.opt (mblock-compare-inline-loop-limit=): Trim
	help text that is too long.
	* config/rs6000/rs6000.opt (mstring-compare-inline-limit=): Trim
	help text that is too long.

2018-04-11  Uros Bizjak  <ubizjak@gmail.com>

	* config/alpha/alpha.md (stack_probe_internal): Rename
	from "probe_stack".  Update all callers.

2018-04-11  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/84566
	* sched-deps.c (sched_analyze_insn): Check deps->readonly when invoking
	sched_macro_fuse_insns.

2018-04-11  Alexander Monakov  <amonakov@ispras.ru>

	PR target/84301
	* sched-rgn.c (add_branch_dependences): Move sel_sched_p check here...
	(compute_block_dependences): ... from here.

2018-04-11  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/85331
	* vec-perm-indices.h (vec_perm_indices::clamp): Change input type
	from int to HOST_WIDE_INT.

2018-04-11  Martin Jambor  <mjambor@suse.cz>

	PR ipa/84149
	* ipa-cp.c (propagate_vals_across_pass_through): Expand comment.
	(cgraph_edge_brings_value_p): New parameter dest_val, check if it is
	not the same as the source val.
	(cgraph_edge_brings_value_p): New parameter.
	(gather_edges_for_value): Pass destination value to
	cgraph_edge_brings_value_p.
	(perhaps_add_new_callers): Likewise.
	(get_info_about_necessary_edges): Likewise and exclude values brought
	only by self-recursive edges.
	(create_specialized_node): Redirect only clones of self-calling edges.
	(+self_recursive_pass_through_p): New function.
	(find_more_scalar_values_for_callers_subset): Use it.
	(find_aggregate_values_for_callers_subset): Likewise.
	(known_aggs_to_agg_replacement_list): Removed.
	(decide_whether_version_node): Re-calculate known constants for all
	remaining context clones.

2018-04-11  Richard Biener  <rguenther@suse.de>

	PR lto/85339
	* dwarf2out.c (dwarf2out_finish): Remove DW_AT_stmt_list attribute
	from early DWARF output.
	(dwarf2out_early_finish): Output line info unconditionally into
	early DWARF and add reference to it.

2018-04-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/85281
	* config/i386/sse.md (iptr): Add V16SFmode and V8DFmode cases.
	(<avx512>_vec_dup<mode><mask_name>): Use a single pattern for modes
	other than V2DFmode using iptr mode attribute.
	(<avx512>_vec_dup<mode><mask_name>): Use iptr mode attribute.

2018-04-11  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/84659
	* sel-sched-ir.c (sel_init_pipelining): Invoke cleanup_cfg.

2018-04-11  Jakub Jelinek  <jakub@redhat.com>

	PR debug/85302
	* dwarf2out.c (skip_loc_list_entry): Don't call size_of_locs if
	SIZEP is NULL.
	(output_loc_list): Pass address of a dummy size variable even in the
	locview handling loop.
	(index_location_lists): Add comment on why skip_loc_list_entry can't
	call size_of_locs.

2018-04-11  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	PR target/85261
	* config/arm/arm-builtins.c (arm_expand_builtin): Force input operand
	into register.

2018-04-10  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/85321
	* doc/invoke.texi (RS/6000 and PowerPC Options): Document options
	-mblock-compare-inline-limit, -mblock-compare-inline-loop-limit,
	and -mstring-compare-inline-limit.

2018-04-10  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/85287
	* config/rs6000/rs6000.md (allocate_stack): Put the residual size
	for stack clash protection in a register whenever we need it to be in
	a register.

2018-04-10  Segher Boessenkool  <segher@kernel.crashing.org>

	* common/config/rs6000/rs6000-common.c (rs6000_option_init_struct):
	Enable -fasynchronous-unwind-tables by default if OBJECT_FORMAT_ELF.

2018-04-10  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/85321
	* config/rs6000/rs6000.opt (mtraceback=): Show the allowed values in
	the help text.
	(mlong-double-): Ditto.
	* config/rs6000/sysv4.opt (msdata=): Ditto.
	(mtls-size=): Ditto.

2018-04-10  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Remove
	erroneous entries for
	"vector int vec_ldl (int, long int *)", and
	"vector unsigned int vec_ldl (int, unsigned long int *)".
	Add comments and entries for
	"vector bool char vec_ldl (int, bool char *)",
	"vector bool short vec_ldl (int, bool short *)",
	"vector bool int vec_ldl (int, bool int *)",
	"vector bool long long vec_ldl (int, bool long long *)",
	"vector pixel vec_ldl (int, pixel *)",
	"vector long long vec_ldl (int, long long *)",
	"vector unsigned long long vec_ldl (int, unsigned long long *)".
	* config/rs6000/rs6000.c (rs6000_init_builtins): Initialize new
	type tree bool_long_long_type_node and correct definition of
	bool_V2DI_type_node to make reference to this new type tree.
	(rs6000_mangle_type): Replace erroneous reference to
	bool_long_type_node with bool_long_long_type_node.
	* config/rs6000/rs6000.h (enum rs6000_builtin_type_index): Add
	comments to emphasize sign distinctions for char and int types and
	replace RS6000_BTI_bool_long constant with
	RS6000_BTI_bool_long_long constant.  Also add comment to restrict
	use of RS6000_BTI_pixel.
	(bool_long_type_node): Remove this macro definition.
	(bool_long_long_type_node): New macro definition

2018-04-10  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/85300
	* combine.c (subst): Handle subst of CONST_SCALAR_INT_P new_rtx also
	into FLOAT and UNSIGNED_FLOAT like ZERO_EXTEND, return a CLOBBER if
	simplify_unary_operation fails.

2018-04-10  Martin Liska  <mliska@suse.cz>

	* gdbhooks.py: Add pretty-printers for varpool_node, symtab_node,
	cgraph_edge and ipa_ref.

2018-04-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/85177
	PR target/85255
	* config/i386/sse.md
	(<extract_type>_vinsert<shuffletype><extract_suf>_mask): Fix
	computation of the VEC_MERGE selector from mask.
	(<extract_type>_vinsert<shuffletype><extract_suf>_1<mask_name>):
	Fix decoding of the VEC_MERGE selector into mask.

2018-04-10  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/85286
	* tree-vect-data-refs.c (vect_get_smallest_scalar_type):

2018-04-10  Richard Sandiford  <richard.sandiford@linaro.org>

	* final.c (final_1): Set insn_last_address as well as
	insn_current_address.

2018-04-10  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/85173
	* explow.c (emit_stack_probe): Call validize_mem on memory location
	before passing it to gen_probe_stack.  Create address operand and
	legitimize it for the probe_stack_address case.

2018-04-09  Jan Hubicka  <jh@suse.cz>

	PR lto/85078
	* ipa-devirt.c (rebuild_type_inheritance-hash): New.
	* ipa-utils.h (rebuild_type_inheritance-hash): Declare.
	* tree.c (free_lang_data_in_type): Fix handling of binfos;
	walk basetypes.
	(free_lang_data): Rebuild type inheritance graph.

2018-04-09  Martin Sebor  <msebor@redhat.com>

	* invoke.texi (-finline-small-functions): Mention other optimization
	options.
	(-findirect-inlining, -fpartial-inlining): Same.
	(-finline-functions-called-once): Same.
	(-freorder-blocks-and-partition): Same.

2018-04-09  Jan Hubicka  <jh@suse.cz>

	PR rtl/84058
	* cfgcleanup.c (try_forward_edges): Do not give up on crossing
	jumps; choose last target that matches the criteria (i.e.
	no partition changes for non-crossing jumps).
	* cfgrtl.c (cfg_layout_redirect_edge_and_branch): Add basic
	support for redirecting crossing jumps to non-crossing.

2018-04-09  Alexey Brodkin  <abrodkin@synopsys.com>

	* config/arc/arc.c (arc_expand_prologue): Set stack usage info
	also for naked functions.

2018-04-09  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (add_shift): New pattern.
	(add_shift2): Likewise.
	(sub_shift): Likewise.
	(sub_shift_cmp0_noout): Likewise.
	(compare_si_ashiftsi): Likewise.
	(xbfu_cmp0_noout): New combine pattern.
	(xbfu_cmp0"): Likewise.
	(movsi_set_cc_insn): Place the predicable variant first.
	(commutative_binary_cmp0_noout): Remove clobber.
	(commutative_binary_cmp0): New pattern.
	(noncommutative_binary_cmp0): Likewise.
	(noncommutative_binary_cmp0_noout): Likewise.
	(noncommutative_binary_comparison_result_used): Removed.
	(rsub_cmp0): New pattern.
	(rsub_cmp0_noout): Likewise.
	(extzvsi): Changed, keep only meaningful variants.
	(SQH, SEZ): New iterators.
	(SQH_postfix): New mode attribute.
	(SEZ_prefix): New code attribute.
	(<SEZ_prefix>xt<SQH_postfix>_cmp0_noout): New instruction pattern.
	(<SEZ_prefix>xt<SQH_postfix>_cmp0): Likewise.
	* config/arc/predicates.md (cc_set_register): Use CC_REG instead
	of numerical value.
	(noncommutative_operator): Check the availability of barrel
	shifter option.

2018-04-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85284
	* tree-ssa-loop-niter.c (number_of_iterations_exit_assumptions):
	Only use the niter constraining form of simple_iv when the exit
	is always executed.

2018-04-09  Tom de Vries  <tom@codesourcery.com>

	PR target/84041
	* config/nvptx/nvptx.md (define_c_enum "unspecv"): Add UNSPECV_MEMBAR.
	(define_expand "*memory_barrier"): New define_expand.
	(define_insn "memory_barrier"): New insn.

2018-04-09  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/80463
	PR rtl-optimization/83972
	PR rtl-optimization/83480

	* sel-sched-ir.c (has_dependence_note_mem_dep): Take into account the
	correct producer for the insn.
	(tidy_control_flow): Fixup seqnos in case of debug insns.

2018-04-09  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/83913

	* sel-sched-ir.c (merge_expr_data): Choose the middle between two
	different sched-times when merging exprs.

2018-04-09  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/83962

	* sel-sched-ir.c (tidy_control_flow): Correct the order in which we call
	tidy_fallthru_edge and tidy_control_flow.

2018-04-09  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/83530

	* sel-sched.c (force_next_insn): New global variable.
	(remove_insn_for_debug): When force_next_insn is true, also leave only
	next insn in the ready list.
	(sel_sched_region): When the region wasn't scheduled, make another pass
	over it with force_next_insn set to 1.

2018-04-08  Monk Chiang  <sh.chiang04@gmail.com>

	* config.gcc (nds32le-*-*, nds32be-*-*): Add nds32/nds32_intrinsic.h
	into tm_file.
	* config/nds32/constants.md (unspec_volatile_element): Add enum values
	for interrupt control.
	* config/nds32/nds32-intrinsic.c: Implementation of intrinsic
	functions for interrupt control.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32.h (nds32_builtins): Likewise.

2018-04-08  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_init_machine_status,
	nds32_legitimate_index_p, nds32_legitimate_address_p): Consider
	strict_aligned_p field.
	(nds32_expand_to_rtl_hook): New function.
	(TARGET_EXPAND_TO_RTL_HOOK): Define.
	* config/nds32/nds32.h (machine_function): Add strict_aligned_p field.

2018-04-08  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Check that n7 is valid to --with-cpu.
	* config/nds32/nds32-n7.md: New file.
	* config/nds32/nds32-opts.h (nds32_cpu_type): Add CPU_N7.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for n7
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for n7 pipeline.
	* config/nds32/nds32.md (pipeline_model): Add n7.
	* config/nds32/nds32.opt (mcpu): Support n7 pipeline cpus.
	* config/nds32/pipelines.md: Include n7 settings.

2018-04-08  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Check that e8 is valid to --with-cpu.
	* config/nds32/nds32-e8.md: New file.
	* config/nds32/nds32-opts.h (nds32-cpu_type): Add CPU_E8.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for e8
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for e8 pipeline.
	* config/nds32/nds32.md (pipeline_model): Add e8.
	* config/nds32/nds32.opt (mcpu): Support e8 pipeline cpus.
	* config/nds32/pipelines.md: Include e8 settings.

2018-04-08  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Check that n6/n8/s8 are valid to --with-cpu.
	* config/nds32/nds32-n8.md: New file.
	* config/nds32/nds32-opts.h (nds32_cpu_type): Add CPU_N6 and CPU_N8.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for n8
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for n8 pipeline.
	* config/nds32/nds32-utils.c: More implementations for n8 pipeline.
	* config/nds32/nds32.md (pipeline_model): Add n8.
	* config/nds32/nds32.opt (mcpu): Support n8 pipeline cpus.
	* config/nds32/pipelines.md: Include n8 settings.

2018-04-08  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*): Add nds32-utils.o into extra_objs.
	* config/nds32/nds32-n9-2r1w.md: New file.
	* config/nds32/nds32-n9-3r2w.md: New file.
	* config/nds32/nds32-opts.h (nds32_cpu_type, nds32_mul_type,
	nds32_register_ports): New or modify for cpu n9.
	* config/nds32/nds32-pipelines-auxiliary.c: Implementation for n9
	pipeline.
	* config/nds32/nds32-protos.h: More declarations for n9 pipeline.
	* config/nds32/nds32-utils.c: New file.
	* config/nds32/nds32.h (TARGET_PIPELINE_N9, TARGET_PIPELINE_SIMPLE,
	TARGET_MUL_SLOW): Define.
	* config/nds32/nds32.md (pipeline_model): New attribute.
	* config/nds32/nds32.opt (mcpu, mconfig-mul, mconfig-register-ports):
	New options that support cpu n9.
	* config/nds32/pipelines.md: Include n9 settings.
	* config/nds32/t-nds32 (nds32-utils.o): Add dependency.

2018-04-08  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (output_cond_branch): Output align
	information if necessary.
	(output_cond_branch_compare_zero): Likewise.
	* config/nds32/nds32.c (nds32_adjust_insn_length): Consider align case.
	(nds32_target_alignment): Refine for alignment.
	* config/nds32/nds32.h (NDS32_ALIGN_P): Define.
	(FUNCTION_BOUNDARY): Modify.
	* config/nds32/nds32.md (call_internal, call_value_internal): Consider
	align case.
	* config/nds32/nds32.opt (malways-align, malign-functions): New.

2018-04-08  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add values for
	TLB operation and data prefetch.
	* config/nds32/nds32-intrinsic.c: Implementation of intrinsic
	functions for TLB operation and data prefetch.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32.c (nds32_dpref_names): Likewise.
	(nds32_print_operand): Likewise.
	* config/nds32/nds32.h (nds32_builtins): Likewise.

2018-04-07  Thomas Koenig  <tkoenig@gcc.gnu.org>
	Andrew Pinski <pinsika@gcc.gnu.org>

	PR middle-end/82976
	* match.pd: Use constant_boolean_node of correct type instead of
	boolean_true_node or boolean_false_node for simplifying
	pointer comparisons to zero.

2018-04-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/80021
	* tree.c (verify_type_variant): Make error call in verify_variant_match
	translatable and remove final full stop.

2018-04-07  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add
	UNSPEC_VOLATILE_EH_RETURN.
	* config/nds32/nds32-md-auxiliary.c (nds32_output_stack_push,
	nds32_output_stack_pop): Support dwarf exception handling process.
	* config/nds32/nds32-protos.h (nds32_dynamic_chain_address): Declare.
	* config/nds32/nds32.c (nds32_init_machine_status): Support dwarf
	exception handling process.
	(nds32_compute_stack_frame): Likewise.
	(nds32_return_addr_rtx): Likewise.
	(nds32_initial_elimination_offset): Likewise.
	(nds32_expand_prologue): Likewise.
	(nds32_expand_epilogue): Likewise.
	(nds32_dynamic_chain_address): New function.
	* config/nds32/nds32.h (machine_function): Add fields for dwarf
	exception handling.
	(DYNAMIC_CHAIN_ADDRESS): Define.
	(EH_RETURN_DATA_REGNO): Define.
	(EH_RETURN_STACKADJ_RTX): Define.
	* config/nds32/nds32.md (eh_return, nds32_eh_return): Implement
	patterns for dwarf exception handling.

2018-04-07  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h: Clean up obsolete macros.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_element, unspec_volatile_element):
	Add enum values for particular instructions.
	* config/nds32/nds32-intrinsic.c: Implementation of expanding
	particular intrinsic functions.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32.h (nds32_builtins): Likewise.
	* config/nds32/nds32.md (type): Add pbsad and pbsada.
	(btst, ave): New patterns for particular instructions.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_element, unspec_volatile_element):
	Add enum values for atomic load/store and memory sync.
	* config/nds32/nds32-intrinsic.c: Implementation for atomic load/store
	and memory sync.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32_intrinsic.h: Likewise.
	* config/nds32/nds32.h (nds32_builtins): Likewise.

2018-04-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/85257
	* fold-const.c (native_encode_vector): If not all elts could fit
	and off is -1, return 0 rather than offset.
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Pass
	(offseti - offset2) / BITS_PER_UNIT as 4th argument to
	native_encode_expr.  Verify len * BITS_PER_UNIT >= maxsizei.  Don't
	adjust buffer in native_interpret_expr call.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add cache
	control enum values.
	* config/nds32/nds32-intrinsic.c: Add cache control expand functions.
	* config/nds32/nds32-intrinsic.md: Add cache control patterns.
	* config/nds32/nds32.c (nds32_cctl_names): New.
	(nds32_print_operand): Handle cache control register names.
	* config/nds32/nds32.h (nds32_builtins): New enum values.
	* config/nds32/nds32_intrinsic.h: Add cache control enum types and
	macros.
	* config/nds32/nds32.md (type): Add mmu.
	* config/nds32/pipelines.md (simple_insn): Add mmu.

2018-04-07  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (type): Remove call.
	* config/nds32/pipelines.md (simple_insn): Likewise.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/constants.md (unspec_volatile_element): Add
	UNSPEC_VOLATILE_FMFCSR, UNSPEC_VOLATILE_FMTCSR and
	UNSPEC_VOLATILE_FMFCFG.
	* config/nds32/nds32-intrinsic.c (bdesc_noarg): New builtin
	description for fmfcfg and fmfcsr.
	(bdesc_1arg): Add fmtcsr.
	(bdesc_2arg): Add fcpynss, fcpyss, fcpynsd and fcpysd.
	(nds32_expand_builtin_impl): Deal with FPU intrinsic functions.
	* config/nds32/nds32-intrinsic.md (unspec_fcpynsd, unspec_fcpysd,
	unspec_fcpynss, unspec_fcpysd, unspec_fcpyss, unspec_fmfcsr,
	unspec_fmfcfg): New patterns.
	* config/nds32/nds32.h (nds32_builtins): Add NDS32_BUILTIN_FMFCFG,
	NDS32_BUILTIN_FMFCSR, NDS32_BUILTIN_FMTCSR, NDS32_BUILTIN_FCPYNSS,
	NDS32_BUILTIN_FCPYSS,NDS32_BUILTIN_FCPYNSD and NDS32_BUILTIN_FCPYSD.
	* config/nds32/nds32_intrinsic.h (__nds32__fcpynsd, __nds32__fcpynss,
	__nds32__fcpysd, __nds32__fcpyss, __nds32__fmfcsr, __nds32__fmtcsr,
	__nds32__fmfcfg): Define.

2018-04-07  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/nds32.c (nds32_intrinsic_register_names): Add more
	intrinsic register names.
	* config/nds32/nds32_intrinsic.h (nds32_intrinsic_registers): Add more
	intrinsic register enum values and macros.

2018-04-07  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_legitimate_index_p): Modify condition
	for load/store addressing form.
	(nds32_print_operand_address): Likewise.

2018-04-06  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/85196
	* config/sparc/sparc.c (sparc_expand_move): Deal with symbolic operands
	based on LABEL_REF.  Remove useless assertion.
	(pic_address_needs_scratch): Fix formatting.
	(sparc_legitimize_pic_address): Minor tweaks.
	(sparc_delegitimize_address): Adjust assertion accordingly.
	* config/sparc/sparc.md (movsi_pic_label_ref): Change label_ref_operand
	into symbolic_operand.
	(movsi_high_pic_label_ref): Likewise.
	(movsi_lo_sum_pic_label_ref): Likewise.
	(movdi_pic_label_ref): Likewise.
	(movdi_high_pic_label_ref): Likewise.
	(movdi_lo_sum_pic_label_ref): Likewise.

2018-04-06  Amaan Cheval  <amaan.cheval@gmail.com>

	* config.gcc (x86_64-*-rtems*): Add rtems.h to tm_file for
	custom LIB_SPEC setup.

2018-04-06  Ruslan Bukin  <br@bsdpad.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config.gcc (riscv*-*-freebsd*): Add RISC-V FreeBSD support.
	* config/riscv/freebsd.h: New.

2018-04-06  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_adjust_insn_length): Refine.
	* config/nds32/nds32.h (ADJUST_INSN_LENGTH): Change the location in
	file.

2018-04-06  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_output_return,
	nds32_output_call, nds32_symbol_binds_local_p): New functions.
	* config/nds32/nds32-protos.h (nds32_output_call,
	nds32_output_return): Declare.
	* config/nds32/nds32.md: Refine all the call and return patterns.

2018-04-06  Jakub Jelinek  <jakub@redhat.com>

	PR debug/85252
	* dwarf2out.c (rtl_for_decl_init): For STRING_CST initializer only
	build CONST_STRING if TYPE_MAX_VALUE is non-NULL and is INTEGER_CST.

	PR rtl-optimization/84872
	* cfgloopmanip.c (create_preheader): Use make_forwarder_block even if
	nentry == 1 when CP_FALLTHRU_PREHEADERS and single_entry is
	EDGE_CROSSING edge.

2018-04-06  Tamar Christina  <tamar.christina@arm.com>

	* expr.c (copy_blkmode_to_reg): Revert 254862.
	* doc/sourcebuild.texi (word_mode_no_slow_unalign): Likewise.

2018-04-06  Richard Biener  <rguenther@suse.de>

	PR middle-end/85244
	* tree-dfa.c (get_ref_base_and_extent): Reset seen_variable_array_ref
	after seeing a component reference with an adjacent field.  Treat
	refs to arrays at struct end of external decls similar to
	refs to unconstrained commons.

2018-04-06  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/85213
	* fold-const.c (twoval_comparison_p): Remove SAVE_P argument and don't
	look through SAVE_EXPRs with non-side-effects argument.  Adjust
	recursive calls.
	(fold_comparison): Adjust twoval_comparison_p caller, don't handle
	save_p here.

2018-04-06  Richard Biener  <rguenther@suse.de>

	PR middle-end/85180
	* alias.c (find_base_term): New wrapper around find_base_term
	unwinding CSELIB_VAL_PTR changes.
	(find_base_term): Do not restore CSELIB_VAL_PTR during the
	recursion.

2018-04-06  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* config/s390/s390.c (s390_z10_optimize_cmp): Expand dedicated NOP
	instructions.
	* config/s390/s390.md (UNSPECV_NOP_LR_0, UNSPECV_NOP_LR_1): New
	constant definitions.
	("nop"): lr 0,0 -> nopr r0
	("nop_lr0", "nop_lr1"): New insn definitions.

2018-04-06  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (*stack_push, *stack_pop): Use
	NDS32_V3PUSH_AVAILABLE_P macro.

2018-04-06  Monk Chiang  <sh.chiang04@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (nds32*-*-*): Add v2j v3f v3s checking.
	(nds32*-*-*): Add float and fpu_config into supported_defaults.
	* common/config/nds32/nds32-common.c (TARGET_DEFAULT_TARGET_FLAGS):
	Include TARGET_DEFAULT_FPU_ISA and TARGET_DEFAULT_FPU_FMA.
	* config/nds32/constants.md (unspec_element): Add UNSPEC_COPYSIGN,
	UNSPEC_FCPYNSD, UNSPEC_FCPYNSS, UNSPEC_FCPYSD and UNSPEC_FCPYSS.
	* config/nds32/constraints.md: New constraints and checking for hard
	float configuration.
	* config/nds32/iterators.md: New mode iterator and attribute for hard
	float configuration.
	* config/nds32/nds32-doubleword.md: Use hard float alternatives and
	patterns.
	* config/nds32/nds32-fpu.md: New file.
	* config/nds32/nds32-md-auxiliary.c: New functions and checkings to
	deal with hard float code generation.
	* config/nds32/nds32-opts.h (nds32_arch_type): Add ARCH_V3F and
	ARCH_V3S.
	(abi_type, float_reg_number): New enum type.
	* config/nds32/nds32-predicates.c: New predicates for hard float.
	* config/nds32/nds32-protos.h: Declare functions for hard float.
	* config/nds32/nds32.c: Implementation for hard float configuration.
	* config/nds32/nds32.h: Definitions for hard float configuration.
	* config/nds32/nds32.md: Include hard float machine description and
	modify patterns for hard float configuration.
	* config/nds32/nds32.opt: New options for hard float configuration.
	* config/nds32/predicates.md: New predicates for hard float
	configuration.

2018-04-06  Kuan-Lin Chen  <kuanlinchentw@gmail.com>

	* common/config/nds32/nds32-common.c
	(nds32_option_optimization_table): Enable -mreleax-hint by default.

2018-04-05  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/85195
	* match.pd (BIT_FIELD_REF CONSTRUCTOR@0 @1 @2): Use view_convert around
	CONSTRUCTOR_ELT (ctor, ...)->value.

2018-04-05  Uros Bizjak  <ubizjak@gmail.com>

	PR target/85193
	* config/i386/i386.md (define_attr "memory"): Handle rotate1 type.

2018-04-05  Tom de Vries  <tom@codesourcery.com>

	PR target/85204
	* config/nvptx/nvptx.c (nvptx_single): Fix neutering of bb with only
	cond jump.

2018-04-05  Shiva Chen  <shiva0217@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/constraints.md (U33): Fine-tune checking condition.
	* config/nds32/nds32-md-auxiliary.c (nds32_mem_format): Ditto.
	* config/nds32/nds32.h (nds32_16bit_address_type): Add
	ADDRESS_POST_MODIFY_LO_REG_IMM3U.

2018-04-05  Shiva Chen  <shiva0217@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/constraints.md (Ufe): New memory constraint.
	* config/nds32/nds32-md-auxiliary.c (nds32_mem_format,
	nds32_output_16bit_load): Consider r8 register for lwi45.fe format.
	* config/nds32/nds32.c (nds32_print_operand): Output lwi45.fe
	operands.
	* config/nds32/nds32.h (nds32_16bit_address_type): Add ADDRESS_R8_IMM7U.
	* config/nds32/nds32.md (*mov<mode>): Adjust pattern.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md: Use optimize_size in the condition for
	alu-shift instructions.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (divsi4, udivsi4): New patterns.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (negsi2): Refine pattern.

2018-04-05  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/iterators.md (shift_rotate): New code iterator.
	(shift): New code attribute.
	* config/nds32/nds32-md-auxiliary.c (nds32_expand_constant): New.
	* config/nds32/nds32-protos.h (nds32_expand_constant): Declare.
	* config/nds32/nds32.c (nds32_print_operand): Deal with more cases.
	* config/nds32/nds32.md (addsi3, *add_srli): Refine implementation for
	bit-wise operations.
	(andsi3, *andsi3): Ditto.
	(iorsi3, *iorsi3, *or_slli, *or_srli): Ditto.
	(xorsi3, *xorsi3, *xor_slli, *xor_srli): Ditto.
	(<shift>si3, *ashlsi3, *ashrsi3, *lshrsi3, *rotrsi3): Ditto.
	* config/nds32/predicates.md (nds32_rimm5u_operand, nds32_and_operand,
	nds32_ior_operand, nds32_xor_operand): New predicates.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (add<mode>3, sub<mode>3): Rename to ...
	(addsi3, subsi3): ... this.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (*sub_srli, *and_slli): Fine-tune predicator.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md: Adjust indention.

2018-04-05  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32.md (feature): New attribute.

2018-04-05  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (subtype): New attribute.

2018-04-04  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	PR target/85203
	* config/arm/arm-builtins.c (arm_expand_builtin): Change
	expansion to perform a bitwise AND of the argument followed by a
	boolean negation of the result.

2018-04-04  Peter Bergner  <bergner@vnet.ibm.com>

	PR rtl-optimization/84878
	* ddg.c (add_cross_iteration_register_deps): Use DF_REF_BB to determine
	the basic block.  Assert the use reference is not artificial and that
	it has an associated insn.

2018-04-04  Michael Matz  <matz@suse.de>

	* builtins.c (compute_objsize): Pass correct operand
	to array_at_struct_end_p.

2018-04-04  Richard Biener  <rguenther@suse.de>

	PR lto/85176
	* dwarf2out.c (dwarf2out_register_external_die): Peel namespaces
	from contexts for DINFO_LEVEL_TERSE and below.

2018-04-04  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-doubleword.md (move_<mode>): Require
	resiter_operand condition.
	* config/nds32/nds32.md (*move<mode>): Ditto.

2018-04-04  Kito Cheng  <kito.cheng@gmail.com>
	    Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/nds32.md (movmisalign<mode>): New pattern.

2018-04-04  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (movqi, movhi): Merge into mov<mode>.

2018-04-04  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_inverse_cond_code,
	nds32_cond_code_str, output_cond_branch,
	output_cond_branch_compare_zero, nds32_expand_cbranch,
	nds32_expand_cstore, nds32_expand_movcc,
	nds32_output_cbranchsi4_equality_zero,
	nds32_output_cbranchsi4_equality_reg,
	nds32_output_cbranchsi4_equality_reg_or_const_int,
	nds32_output_cbranchsi4_greater_less_zero: New functions.
	* config/nds32/nds32-protos.h (nds32_expand_cbranch,
	nds32_expand_cstore, nds32_expand_movcc,
	nds32_output_cbranchsi4_equality_zero,
	nds32_output_cbranchsi4_equality_reg,
	nds32_output_cbranchsi4_equality_reg_or_const_int,
	nds32_output_cbranchsi4_greater_less_zero): Declare.
	* config/nds32/predicates.md (nds32_movecc_comparison_operator,
	nds32_rimm11s_operand): New predicates.
	* config/nds32/nds32.h (nds32_expand_result_type): New enum type.
	* config/nds32/nds32.md: Rewrite all the branch and conditional move
	patterns.

2018-04-04  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-doubleword.md: Refine all the instruction type.
	* config/nds32/nds32.md: Ditto.
	* config/nds32/pipelines.md: Ditto.

2018-04-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85168
	* tree-ssa-sccvn.c (vn_reference_maybe_forwprop_address): Avoid
	propagating abnormals.

2018-04-04  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (enabled): Use yes/no for this attribute.

2018-04-04  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_long_call_p): New function.
	* config/nds32/nds32-protos.h (nds32_long_call_p): Declare.
	* config/nds32/nds32.c (nds32_function_ok_for_sibcall): New function.
	(TARGET_FUNCTION_OK_FOR_SIBCALL): Define.
	* config/nds32/nds32.md (sibcall_internal): New.
	(sibcall_register): Remove.
	(sibcall_immediate): Remove.
	(sibcall_value_internal): New.
	(sibcall_value_register): Remove.
	(sibcall_value_immediate): Remove.
	* config/nds32/predicates.md (nds32_general_register_operand): New.
	(nds32_call_address_operand): New.

2018-04-03  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/85167
	* shrink-wrap.c (move_insn_for_shrink_wrap): Don't set bb_uses and
	bb_defs if *split_p, instead preinitialize it to NULL.

	PR tree-optimization/85156
	* builtins.c (fold_builtin_expect): Use save_expr on arg1 to avoid
	evaluating the argument multiple times.

2018-04-03  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/emmintrin.h (_mm_cvtpd_epi32): Use __vector rather
	than vector.
	(_mm_cvtpd_ps): Likewise.
	(_mm_cvttpd_epi32): Likewise.
	* config/rs6000/mmintrin.h (_mm_unpacklo_pi8): Likewise.
	* config/rs6000/xmmintrin.h: For strict-ANSI C++ or C11, undefine
	vector, pixel, and bool following altivec.h include.

2018-04-03  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (Common Function Attributes): Clarify.
	(const attribute): Likewise.
	(pure attribute): Likewise.

2018-04-03  Jakub Jelinek  <jakub@redhat.com>

	PR target/85169
	* config/i386/i386.c (ix86_expand_vector_set): Use
	HOST_WIDE_INT_1U << elt instead of 1 << elt.  Formatting fix.

2018-04-03  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (emit_i387_cw_initialization): Always use logic
	instructions when changing rounding bits to preserve precision bits
	in the x87 control word.

2018-04-03  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/82491
	* rtl.h (strip_offset_and_add): Replace += suboffset with
	poly_uint64 () + suboffset.

2018-03-29  Martin Liska  <mliska@suse.cz>
	    Martin Jambor  <mjambor@suse.cz>

	PR ipa/84947
	* ipa-cp.c (propagate_bits_across_jump_function): Bail out if
	param_type is not an integral or pointer type.

2018-04-03  Richard Biener  <rguenther@suse.de>

	* sese.h (recompute_all_dominators): Remove.

2018-04-02  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wrestrict): Fix typos.

2018-04-02  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.h (SHIFT_COUNT_TRUNCATED): Set to zero.
	* config/riscv/riscv.md (<optab>si3): Use QImode shift count.
	(<optab>di3, <optab>si3_extend): Likewise.
	(<optab>si3_mask, <optab>si3_mask_1): New.
	(<optab>di3_mask, <optab>di3_mask_1): New.
	(<optab>si3_extend_mask, <optab>si3_extend_mask_1): New.
	(lshrsi3_zero_extend_1): Use VOIDmode shift count.
	* config/riscv/sync.md (atomic_test_and_set): Emit QImode shift count.

2018-04-02  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/cpp.texi (Variadic Macros): Fix line continuation in an
	example.

2018-04-02  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (TARGET_CANONICALIZE_COMPARISON): Define.
	(nds32_canonicalize_comparison): New function.

2018-04-01  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Kuan-Lin Chen  <kuanlinchentw@gmail.com>

	* config.gcc (nds32): Add nds32-relax-opt.o into extra_objs.
	* config/nds32/constants.md (unspec_volatile_element): Add
	UNSPEC_VOLATILE_RELAX_GROUP.
	* config/nds32/nds32-relax-opt.c: New file.
	* config/nds32/nds32-predicates.c
	(nds32_symbol_load_store_p): New function.
	* config/nds32/nds32-protos.h
	(nds32_symbol_load_store_p): Declare function.
	(make_pass_nds32_relax_opt): Declare new rtl pass function.
	* config/nds32/nds32.c
	(nds32_register_pass): New function to register pass.
	(nds32_register_passes): New function to register passes.
	* config/nds32/nds32.md (relax_group): New pattern.
	* config/nds32/nds32.opt (mrelax-hint): New option.
	* config/nds32/t-nds32 (nds32-relax-opt.o): New dependency.

2018-04-01  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/t-nds32: Modify files dependency.

2018-04-01  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (FUNCTION_PROFILER): Output newline character.
	(PROFILE_HOOK): Define its implementation.

2018-04-01  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (WCHAR_TYPE, WCHAR_TYPE_SIZE): Use unsigned int
	type and 32-bit size.

2018-04-01  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/85090
	* config/i386/sse.md (V): Add V64QI and V32HI for TARGET_AVX512F.
	(V_128_256): New mode iterator.
	(*avx512dq_vextract<shuffletype>64x2_1 splitter): New define_split.
	(*avx512f_vextract<shuffletype>32x4_1 splitter): Likewise.
	(xop_pcmov_<mode><avxsizesuffix>): Use V_128_256 mode iterator instead
	of V.
	* config/i386/i386.c (ix86_expand_vector_set): Improve V32HImode and
	V64QImode expansion for !TARGET_AVX512BW && TARGET_AVX512F.

2018-03-31  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/83315
	* config/rs6000/xmmintrin.h (_mm_set_ps, _mm_max_ps): Handle (quiet)
	NaN inputs correctly.

2018-03-30  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/80546
	* config/rs6000/vsx.md (??r): New mode attribute.
	(*vsx_mov<mode>_64bit): Use it.
	(*vsx_mov<mode>_32bit): Likewise.

2018-03-30  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84818
	* builtins.c (check_access): Use warning_n.

2018-03-30  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	PR target/83822
	* config/rs6000/rs6000-string.c (expand_compare_loop): Fix redundant
	condition.
	* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Fix redundant
	condition.

2018-03-30  Julia Koval  <julia.koval@intel.com>

	PR target/84413
	* x86-tune.def (movx, partial_reg_dependency): Enable for
	m_SKYLAKE_AVX512.

2018-03-29  Vladimir Makarov  <vmakarov@redhat.com>

	PR inline-asm/84985
	* lra-constraints.c (process_alt_operands): Move setting
	this_alternative_matches below.

2018-03-29  Martin Liska  <mliska@suse.cz>

	PR lto/84995.
	* doc/invoke.texi: Document how LTO works with debug info.
	Describe auto-load support of binutils.  Mention 'x86-64'
	as valid option value of -march option.

2018-03-29  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/sse.md (<avx512>_blendm<mode>): Use <sseintprefix>.

	PR c/85094
	* fold-const.c (operand_equal_p): Handle DEBUG_BEGIN_STMT.
	For STATEMENT_LIST, pass down OEP_LEXICOGRAPHIC and maybe
	OEP_NO_HASH_CHECK for recursive call, to avoid exponential
	checking.

2018-03-28  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/84912
	* config/rs6000/rs6000.h (RS6000_BTM_POWERPC64): New define.
	(RS6000_BTM_COMMON): Add RS6000_BTM_POWERPC64.
	* config/rs6000/rs6000.c (rs6000_builtin_mask_calculate): Add support
	for RS6000_BTM_POWERPC64.
	(rs6000_invalid_builtin): Add handling for RS6000_BTM_POWERPC64
	(rs6000_builtin_mask_names): Add RS6000_BTM_POWERPC64.
	* config/rs6000/rs6000-builtin.def (BU_P7_POWERPC64_MISC_2): New macro
	definition.
	(DIVDE): Use it.
	(DIVDEU): Likewise.

2018-03-28  Carl Love  <cel@us.ibm.com>

	Revert
	2017-09-27  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def (BU_FP_1MISC_1): Add define macro.
	(FCTID, FCTIW): Add BU_FP_MISC_1 macro expansion for builtins.
	* config/rs6000/rs6000.md (lrintsfsi2): Add define_insn for the
	fctiw instruction.

2018-03-28  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/xmmintrin.h (_mm_max_pi16): Use __vector __bool
	instead of __vector bool.
	(_mm_max_pu8): Likewise.
	(_mm_min_pi16): Likewise.

2018-03-28  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/84912
	* config/rs6000/rs6000-builtin.def (DIVWEO): Delete macro expansion.
	(DIVWEUO): Likewise.
	(DIVDEO): Likewise.
	(DIVDEUO): Likewise.
	* config/rs6000/rs6000.c (builtin_function_type): Remove support for
	DIVWEUO and DIVDEUO.
	* config/rs6000/rs6000.md (UNSPEC_DIVEO, UNSPEC_DIVEUO): Delete unspecs.
	(UNSPEC_DIV_EXTEND): Remove deleted unspecs.
	(div_extend): Likewise.
	* doc/extend.texi (__builtin_divweo): Remove documentation for deleted
	builtin function.
	(__builtin_divweuo): Likewise.
	(__builtin_divdeo): Likewise.
	(__builtin_divdeuo): Likewise.

2018-03-28  Jakub Jelinek  <jakub@redhat.com>

	PR target/85095
	* config/i386/i386.md (*add<mode>3_carry_0, *addsi3_carry_zext_0,
	*sub<mode>3_carry_0, *subsi3_carry_zext_0): New patterns.

	PR tree-optimization/82004
	* gimple-match-head.c (optimize_pow_to_exp): New function.
	* match.pd (pow(C,x) -> exp(log(C)*x)): Wrap with #if GIMPLE.
	Don't fold to exp if optimize_pow_to_exp is false.

2018-03-28  Martin Liska  <mliska@suse.cz>

	PR other/84819
	* calls.c (initialize_argument_information): Fix trailing space.
	* common.opt: Fix typo and provide better explanation for
	-fsanitize-coverage option.
	* config/i386/i386.opt: Fix typo.

2018-03-28  Jakub Jelinek  <jakub@redhat.com>
	    Martin Liska  <mliska@suse.cz>

	PR sanitizer/85081
	* gimplify.c (asan_poison_variable): Don't do the check for
	gimplify_omp_ctxp here.
	(gimplify_decl_expr): Do it here.
	(gimplify_target_expr): Likewise.

2018-03-28  Martin Liska  <mliska@suse.cz>

	PR target/84988
	* config/i386/i386.c (ix86_function_arg_advance): Do not call
	chkp_type_bounds_count if MPX is not enabled.

2018-03-27  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (BRANCH_COST): Adjust cost.

2018-03-27  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/84914
	* config/rs6000/rs6000.c (create_complex_muldiv): New helper
	function to create the function decl for complex long double
	multiply and divide for -mabi=ieeelongdouble.
	(init_float128_ieee): Call it.

2018-03-27  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/85044
	* config/i386/i386.c (ix86_trampoline_init): Insert ENDBR for
	-fcf-protection=branch -mibt.
	* config/i386/i386.h (TRAMPOLINE_SIZE): Increased by 4 bytes.

2018-03-27  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	PR target/81863
	* config/arm/arm.c (arm_valid_symbolic_address): Handle
	arm_word_relocations.

2018-03-27  Cesar Philippidis  <cesar@codesourcery.com>

	PR target/85056
	* config/nvptx/nvptx.c (nvptx_assemble_decl_begin): Add '[]' to
	extern array declarations.

2018-03-27  Richard Biener  <rguenther@suse.de>

	PR middle-end/84067
	* match.pd ((A * C) +- (B * C) -> (A+-B) * C): Guard with
	explicit single_use checks.

2018-03-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/85082
	* tree-ssa-sccvn.c (vn_reference_lookup_or_insert_for_pieces):
	Valueize the VUSE.

2018-03-27  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config.gcc (aarch64*-*-linux*): New TARGET_DEFAULT_ASYNC_UNWIND_TABLES
	* common/config/aarch64/aarch64-common.c (aarch64_optimization_table[]):
	Turn on fasynchronous-unwind-tables and funwind-tables.

2018-03-26  Uros Bizjak  <ubizjak@gmail.com>

	PR target/85073
	* config/i386/i386.md (*bmi_blsr_<mode>_cmp): New insn pattern.
	(*bmi_blsr_<mode>_ccz): Ditto.

2018-03-26  Tom de Vries  <tom@codesourcery.com>

	PR tree-optimization/85063
	* omp-general.c (offloading_function_p): New function.  Factor out
	of ...
	* omp-offload.c (pass_omp_target_link::gate): ... here.
	* omp-general.h (offloading_function_p): Declare.
	* tree-switch-conversion.c (build_one_array): Mark CSWTCH.x variable
	with attribute omp declare target for offloading functions.

2018-03-24  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84005
	* tree-data-ref.h (get_base_for_alignment): Declare.
	* tree-data-ref.c (get_base_for_alignment_1): New function.
	(get_base_for_alignment): Likewise.
	* tree-vect-data-refs.c (vect_compute_data_ref_alignment): Use
	get_base_for_alignment to find a suitable base object, instead
	of always using drb->base_address.

2018-03-23  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/85022
	* emit-rtl.c (init_emit_regs): Indicate that VOIDmode MEMs don't have
	known size by default.

2018-03-23  Vladimir Makarov  <vmakarov@redhat.com>

	PR inline-asm/85030
	* lra-constraints.c (process_alt_operands): Don't match BLKmode
	and non BLKmode operands.

2018-03-23  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/85026
	* config/arm/arm.md (unaligned_loadhis): Remove first alternative.
	Clean up attributes.

2018-03-23  Richard Biener  <rguenther@suse.de>

	PR debug/85020
	* dwarf2out.c (rtl_for_decl_location): Do not generate RTL early when
	we are going to emit early debug for LTO.

2018-03-23  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/85034
	* function.c (match_asm_constraints_1): Don't optimize if input
	doesn't satisfy general_operand predicate for output's mode.

	PR inline-asm/85022
	* alias.c (write_dependence_p): Don't require for x_canonicalized
	non-VOIDmode if x has VOIDmode.

	PR sanitizer/85029
	* sanopt.c (maybe_optimize_ubsan_ptr_ifn): If DECL_REGISTER (base),
	just don't try to optimize it rather than assert it never happens.

2018-03-22  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-builtin.def: Remove various BU_ALTIVEC_X
	macro expansions for definition of ST_INTERNAL_<mode> and
	LD_INTERNAL_<mode> builtins.
	* config/rs6000/rs6000-protos.h (rs6000_address_for_altivec):
	Remove prototype.
	* config/rs6000/rs6000.c (altivec_expand_ld_builtin): Delete this
	function.
	(altivec_expand_st_builtin): Likewise.
	(altivec_expand_builtin): Remove calls to deleted functions.
	(rs6000_address_for_altivec): Delete this function.
	* config/rs6000/vector.md: Remove expands for
	vector_altivec_load_<mode> and vector_altivec_store_<mode>.

2018-03-22  Sudakshina Das  <sudi.das@arm.com>

	PR target/84826
	* config/arm/arm.h (machine_function): Add static_chain_stack_bytes.
	* config/arm/arm.c (arm_compute_static_chain_stack_bytes): Avoid
	re-computing once computed.
	(arm_expand_prologue): Compute machine->static_chain_stack_bytes.
	(arm_init_machine_status): Initialize
	machine->static_chain_stack_bytes.

2018-03-22  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/84760
	* doc/extend.texi: Add four new prototypes for vec_ld.
	* config/rs6000/rs6000-builtin.def (LVX_V1TI): Reorder symbol
	definitions for more logical presentation.
	* config/rs6000/rs6000-c.c: (altivec_overloaded_builtins): Add
	entries for V1TI variants of __builtin_altivec_ld builtin.
	* config/rs6000/rs6000.c: (altivec_expand_lv_builtin): Add test and
	handling of V1TI variant of LVX icode pattern.
	(altivec_expand_builtin): Add case for ALTIVEC_BUILTIN_LVX_V1TI.
	(rs6000_gimple_fold_builtin): Likewise.
	(altivec_init_builtins): Add code to define
	__builtin_altivec_lvx_v1ti function.

2018-03-22  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/84941
	* function.c (match_asm_constraints_1): Don't do the optimization
	if input isn't a REG, SUBREG, MEM or constant.

2018-03-22  Tom de Vries  <tom@codesourcery.com>

	PR tree-optimization/84956
	* tree-ssa-tail-merge.c (find_clusters_1): Skip bbs with
	bb_has_abnormal_pred.

2018-03-22  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/85018
	* dwarf2asm.c (dw2_output_indirect_constant_1): Set
	DECL_INITIAL (decl) to decl at the end.
	* varasm.c (use_blocks_for_decl_p): Revert the 2018-03-20 change,
	adjust the comment.

2018-03-21  Joseph Myers  <joseph@codesourcery.com>

	* doc/extend.texi (__builtin_tgmath): Document when complex
	integer types are treated as _Complex _Float64.

2018-03-21  Tom de Vries  <tom@codesourcery.com>

	* doc/extend.texi (__builtin_extend_pointer): Remove pasto.

2018-03-21  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84960
	* tree-cfg.c (remove_bb): Don't move forced labels into bb->prev_bb
	if it is ENTRY block, move them into single succ of ENTRY in that case.

2018-03-21  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84811
	* poly-int.h (poly_span_traits): Remove the T3 parameter and
	promote HOST_WIDE_INT T2 - T1 results to unsigned HOST_WIDE_INT.
	(maybe_in_range_p, known_in_range_p, ranges_known_overlap_p):
	(known_subrange_p): Update accordingly.  Cast each value involved
	in the size comparison, rather than casting the result of the
	subtraction.

2018-03-21  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84982
	* gimple-ssa-store-merging.c (invert_op): Handle boolean inversion
	by flipping the least significant bit rather than all bits from
	bitpos to bitpos + bitsize - 1.

2018-03-21  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Deprecated Features): Remove mention of
	long-deleted deprecations.

2018-03-21  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR jit/84288
	* configure.ac (gcc_cv_ld_soname) <*-*-solaris2*>: Set.
	* configure: Regenerate.

2018-03-21  Tom de Vries  <tom@codesourcery.com>

	PR tree-optimization/83126
	* tree-parloops.c (num_phis): New function.
	(gen_parallel_loop): Detect and handle canonicalize_loop_ivs failure.

2018-03-21  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Deprecated Features): Update deprecated flags,
	mention anon-struct/union members and trailing attributes.

2018-03-21  Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/84969
	* tree-loop-distribution.c (fuse_memset_builtins): Don't reorder
	builtin memset partitions if they set different rhs values.

2018-03-21  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/84989
	* simplify-rtx.c (simplify_unary_operation_1): Don't try to simplify
	VEC_DUPLICATE with scalar result mode.

2018-03-21  Martin Liska  <mliska@suse.cz>

	PR ipa/84963
	* ipa-icf.c (sem_item_optimizer::fixup_points_to_sets): Remove
	not intended return statement.

2018-03-21  Martin Liska  <mliska@suse.cz>

	PR target/84988
	* tree-chkp.c (CHKP_ARRAY_MAX_CHECK_STEPS): Define a new macro.
	(chkp_find_bound_slots_1): Limit number of iterations.

2018-03-20  David H. Gutteridge  <dhgutteridge@sympatico.ca>

	PR target/84838
	* Minor grammar fixes for x86 options.

2018-03-20  Jakub Jelinek  <jakub@redhat.com>

	PR debug/84875
	* dce.c (delete_unmarked_insns): Don't remove frame related noop moves
	holding REG_CFA_RESTORE notes, instead turn them into a USE.

2018-03-20  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83789
	* config/rs6000/altivec.md (altivec_lvx_<mode>_2op): Delete define_insn.
	(altivec_lvx_<mode>_1op): Likewise.
	(altivec_stvx_<mode>_2op): Likewise.
	(altivec_stvx_<mode>_1op): Likewise.
	(altivec_lvx_<VM2:mode>): New define_expand.
	(altivec_stvx_<VM2:mode>): Likewise.
	(altivec_lvx_<VM2:mode>_2op_<P:mptrsize>): New define_insn.
	(altivec_lvx_<VM2:mode>_1op_<P:mptrsize>): Likewise.
	(altivec_stvx_<VM2:mode>_2op_<P:mptrsize>): Likewise.
	(altivec_stvx_<VM2:mode>_1op_<P:mptrsize>): Likewise.
	* config/rs6000/rs6000-p8swap.c (rs6000_gen_stvx): Use new expanders.
	(rs6000_gen_lvx): Likewise.
	* config/rs6000/rs6000.c (altivec_expand_lv_builtin): Likewise.
	(altivec_expand_stv_builtin): Likewise.
	(altivec_expand_builtin): Likewise.
	* config/rs6000/vector.md: Likewise.

2018-03-20  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/82518
	* config/arm/arm.c (arm_array_mode_supported_p): Return false for
	BYTES_BIG_ENDIAN.

2018-03-20  Richard Biener  <rguenther@suse.de>

	PR target/84986
	* config/i386/i386.c (ix86_add_stmt_cost): Only cost
	sign-conversions as zero, fall back to standard scalar_stmt
	cost for the rest.

2018-03-20  Martin Liska  <mliska@suse.cz>

	PR ipa/84825
	* predict.c (rebuild_frequencies): Handle case when we have
	PROFILE_ABSENT, but flag_guess_branch_prob is false.

2018-03-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/84990
	* dwarf2asm.c (dw2_output_indirect_constant_1): Temporarily turn off
	flag_section_anchors.
	* varasm.c (use_blocks_for_decl_p): Remove hack for
	dw2_force_const_mem.

	PR target/84845
	* config/aarch64/aarch64.md (*aarch64_reg_<mode>3_neg_mask2): Rename
	to ...
	(*aarch64_<optab>_reg_<mode>3_neg_mask2): ... this.  If pseudos can't
	be created, use lowpart_subreg of operands[0] rather than operands[0]
	itself.
	(*aarch64_reg_<mode>3_minus_mask): Rename to ...
	(*aarch64_ashl_reg_<mode>3_minus_mask): ... this.
	(*aarch64_<optab>_reg_di3_mask2): Use const_int_operand predicate
	and n constraint instead of aarch64_shift_imm_di and Usd.
	(*aarch64_reg_<optab>_minus<mode>3): Rename to ...
	(*aarch64_<optab>_reg_minus<mode>3): ... this.

2018-03-20  Sudakshina Das  <sudi.das@arm.com>

	PR target/82989
	* config/arm/neon.md (ashldi3_neon): Update ?s for constraints
	to favor GPR over NEON registers.
	(<shift>di3_neon): Likewise.

2018-03-20  Tom de Vries  <tom@codesourcery.com>

	PR target/84952
	* config/nvptx/nvptx.c (nvptx_single): Don't neuter bar.sync.
	(nvptx_process_pars): Emit bar.sync asap and alap.

2018-03-20  Tom de Vries  <tom@codesourcery.com>

	PR target/84954
	* config/nvptx/nvptx.c (prevent_branch_around_nothing): Also update
	seen_label if seen_label is already set.

2018-03-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/84945
	* config/i386/i386.c (fold_builtin_cpu): For features above 31
	use __cpu_features2 variable instead of __cpu_model.__cpu_features[0].
	Use 1U instead of 1.  Formatting fixes.

	PR c/84953
	* builtins.c (fold_builtin_strpbrk): For strpbrk(x, "") use type
	instead of TREE_TYPE (s1) for the return value.

2018-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84946
	* gimple-ssa-store-merging.c (mem_valid_for_store_merging): Compute
	bitsize + bitsize in poly_uint64 rather than poly_int64.

	PR sanitizer/78651
	* dwarf2asm.c: Include fold-const.c.
	(dw2_output_indirect_constant_1): Set DECL_INITIAL (decl) to ADDR_EXPR
	of decl rather than decl itself.

	PR rtl-optimization/84643
	* memmodel.h (enum memmodel): Add MEMMODEL_MAX enumerator.

2018-03-19  Maxim Ostapenko  <m.ostapenko@samsung.com>

	PR sanitizer/78651
	* dwarf2asm.c (dw2_output_indirect_constant_1): Disable ASan before
	calling assemble_variable.

2018-03-19  Sudakshina Das  <sudi.das@arm.com>

	PR target/81647
	* config/aarch64/aarch64-simd.md (vec_cmp<mode><v_int_equiv>): Modify
	instructions for UNLT, UNLE, UNGT, UNGE, UNEQ, UNORDERED and ORDERED.

2018-03-19  Jim Wilson  <jimw@sifive.com>

	PR bootstrap/84856
	* config/riscv/riscv.c (riscv_function_arg_boundary): Use
	PREFERRED_STACK_BOUNDARY instead of STACK_BOUNDARY.
	(riscv_first_stack_step): Likewise.
	(riscv_option_override): Use STACK_BOUNDARY instead of
	MIN_STACK_BOUNDARY.
	* config/riscv/riscv.h (STACK_BOUNDARY): Renamed from
	MIN_STACK_BOUNDARY.
	(BIGGEST_ALIGNMENT): Set to 128.
	(PREFERRED_STACK_BOUNDARY): Renamed from STACK_BOUNDARY.
	(RISCV_STACK_ALIGN): Use PREFERRED_STACK_BOUNDARY instead of
	STACK_BOUNDARY.

2018-03-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84933
	* tree-vrp.c (set_and_canonicalize_value_range): Treat out-of-bound
	values as -INF/INF when canonicalizing an ANTI_RANGE to a RANGE.

2018-03-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84859
	* tree-ssa-phiopt.c (single_trailing_store_in_bb): New function.
	(cond_if_else_store_replacement): Perform sinking operation on
	single-store BBs regardless of MAX_STORES_TO_SINK setting.
	Generalize what a BB with a single eligible store is.

2018-03-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84929
	* tree-data-ref.c (analyze_siv_subscript_cst_affine): Guard
	chrec_is_positive against non-chrec arg.

2018-03-19  Tamar Christina  <tamar.christina@arm.com>

	PR target/84711
	* config/arm/arm.c (arm_can_change_mode_class): revert r258554.

2018-03-18  Martin Liska  <mliska@suse.cz>

	PR rtl-optimization/84635
	* regrename.c (build_def_use): Use matches_mode only when
	matches >= 0.

2018-03-18  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84913
	* tree-vect-loop.c (vectorizable_reduction): Don't try to
	vectorize chains of COND_EXPRs.

2018-03-18  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (MAX_REGS_PER_ADDRESS): Fix the value.

2018-03-18  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (LOGICAL_OP_NON_SHORT_CIRCUIT): Define.

2018-03-18  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.h (CLZ_DEFINED_VALUE_AT_ZERO): Define.

2018-03-17  Chung-Ju Wu  <jasonwucj@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32-protos.h (nds32_adjust_reg_alloc_order): Declare.
	* config/nds32/nds32.c (nds32_reg_alloc_order_for_speed): New array.
	(nds32_adjust_reg_alloc_order): New function.
	* config/nds32/nds32.h (ADJUST_REG_ALLOC_ORDER): Define.

2018-03-17  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/nds32.c (nds32_asm_output_mi_thunk,
	nds32_print_operand, nds32_print_operand_address): Use
	HOST_WIDE_INT_PRINT_DEC instead.

2018-03-17  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_register_priority): Modify cost.

2018-03-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/84902
	* config/i386/i386.c (initial_ix86_tune_features,
	initial_ix86_arch_features): Use unsigned HOST_WIDE_INT rather than
	unsigned long long.
	(set_ix86_tune_features): Change ix86_tune_mask from unsigned int
	to unsigned HOST_WIDE_INT, initialize to HOST_WIDE_INT_1U << ix86_tune
	rather than 1u << ix86_tune.  Formatting fix.
	(ix86_option_override_internal): Change ix86_arch_mask from
	unsigned int to unsigned HOST_WIDE_INT, initialize to
	HOST_WIDE_INT_1U << ix86_arch rather than 1u << ix86_arch.
	(ix86_function_specific_restore): Likewise.

2018-03-16  Jakub Jelinek  <jakub@redhat.com>

	PR target/84899
	* postreload.c (reload_combine_recognize_pattern): Perform
	INTVAL addition in unsigned HOST_WIDE_INT type to avoid UB and
	truncate_int_for_mode the result for the destination's mode.

	PR c/84909
	* hsa-gen.c (mem_type_for_type): Fix comment typo.
	* tree-vect-loop-manip.c (vect_create_cond_for_niters_checks):
	Likewise.
	* gimple-ssa-warn-restrict.c (builtin_memref::set_base_and_offset):
	Likewise.

2018-03-16  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/84876
	* lra-assigns.c (lra_split_hard_reg_for): Don't use
	regno_allocno_class_array and sorted_pseudos.
	* lra-constraints.c (spill_hard_reg_in_range): Ignore hard regs in
	insns where regno is used.

2018-03-16  Martin Liska  <mliska@suse.cz>

	PR ipa/84833
	* multiple_target.c (create_dispatcher_calls): Redirect
	reference in the symbol table.

2018-03-16  Martin Liska  <mliska@suse.cz>

	PR ipa/84722
	* multiple_target.c (create_dispatcher_calls): Redirect also
	an alias.

2018-03-16  Jakub Jelinek  <jakub@redhat.com>

	PR c++/79937
	PR c++/82410
	* tree.h (TARGET_EXPR_NO_ELIDE): Define.
	* gimplify.c (gimplify_modify_expr_rhs): Don't elide TARGET_EXPRs with
	TARGET_EXPR_NO_ELIDE flag set unless *expr_p is INIT_EXPR.

2018-03-16  Julia Koval  <julia.koval@intel.com>

	* doc/invoke.texi (Skylake Server): Add CLWB.
	Cannonlake): Remove CLWB.

2018-03-16  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84841
	* tree-ssa-reassoc.c (INTEGER_CONST_TYPE): Change to 1 << 4 from
	1 << 3.
	(FLOAT_ONE_CONST_TYPE): Define.
	(constant_type): Return FLOAT_ONE_CONST_TYPE for -1.0 and 1.0.
	(sort_by_operand_rank): Put entries with higher constant_type last
	rather than first to match comments.

2018-03-15  Sandra Loosemore  <sandra@codesourcery.com>

	* config/nios2/nios2.md (movsi_internal): Fix thinko in
	split predicate.

2018-03-15  Jakub Jelinek  <jakub@redhat.com>

	PR c++/79085
	* calls.c (expand_call): For TREE_ADDRESSABLE rettype ignore alignment
	check and use address of target always.

2018-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84574
	* config/i386/i386.c (indirect_thunk_needed): Update comments.
	(indirect_thunk_bnd_needed): Likewise.
	(indirect_thunks_used): Likewise.
	(indirect_thunks_bnd_used): Likewise.
	(indirect_return_needed): New.
	(indirect_return_bnd_needed): Likewise.
	(output_indirect_thunk_function): Add a bool argument for
	function return.
	(output_indirect_thunk_function): Don't generate alias for
	function return thunk.
	(ix86_code_end): Call output_indirect_thunk_function to generate
	function return thunks.
	(ix86_output_function_return): Set indirect_return_bnd_needed
	and indirect_return_needed instead of indirect_thunk_bnd_needed
	and indirect_thunk_needed.

2018-03-15  Olga Makhotina  <olga.makhotina@intel.com>

	* config/i386/sgxintrin.h (_enclv_u32): New intrinsic.
	(__enclv_bc, __enclv_cd, __enclv_generic): New definitions.
	(ERDINFO, ETRACKC, ELDBC, ELDUC): New leaves.

2018-03-15  David Malcolm  <dmalcolm@redhat.com>
	    Paul Hua <paul.hua.gm@gmail.com>

	PR c/84852
	* gcc.dg/fixits-pr84852-1.c: Fix filename in dg-regexp.

2018-03-15  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (abi_v4_pass_in_fpr): Add back the
	TARGET_DOUBLE_FLOAT and TARGET_SINGLE_FLOAT conditions on the DFmode
	resp. SFmode cases.

2018-03-15  Tamar Christina  <tamar.christina@arm.com>

	PR target/84711
	* config/arm/arm.c (arm_can_change_mode_class): Use GET_MODE_UNIT_SIZE
	instead of GET_MODE_SIZE when comparing Units.

2018-03-15  Vladimir Mezentsev  <vladimir.mezentsev@oracle.com>

	PR target/68256
	* varasm.c (hash_section): Return an unchangeble hash value
	* config/aarch64/aarch64.c (aarch64_use_blocks_for_constant_p):
	Return !aarch64_can_use_per_function_literal_pools_p ().

2018-03-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/84860
	* optabs.c (emit_conditional_move): Pass address of cmode's copy
	rather than address of cmode as last argument to prepare_cmp_insn.

2018-03-15  Julia Koval  <julia.koval@intel.com>

	* config/i386/i386.c (F_AVX512VBMI2, F_GFNI, F_VPCLMULQDQ,
	F_AVX512VNNI, F_AVX512BITALG): New.

2018-03-14  John David Anglin  <danglin@gcc.gnu.org>

	PR target/83451
	* config/pa/pa.c (pa_emit_move_sequence):  Always emit secondary reload
	insn for floating-point loads and stores.

2018-03-14  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-c.c: Add macro definitions for
	ALTIVEC_BUILTIN_VEC_PERMXOR.
	* config/rs6000/rs6000.h: Add #define for vec_permxor builtin.
	* config/rs6000/rs6000-builtin.def: Add macro expansions for VPERMXOR.
	* config/rs6000/altivec.md (altivec_vpermxor): New define expand.
	* config/rs6000/rs6000-p8swap.c (rtx_is_swappable_p): Add case
	UNSPEC_VPERMXOR.
	* config/doc/extend.texi: Add prototypes for vec_permxor.

2018-03-14  David Malcolm  <dmalcolm@redhat.com>

	PR c/84852
	* diagnostic-show-locus.c (class layout_point): Convert m_line
	from int to linenum_type.
	(line_span::comparator): Use linenum "compare" function when
	comparing line numbers.
	(test_line_span): New function.
	(layout_range::contains_point): Convert param "row" from int to
	linenum_type.
	(layout_range::intersects_line_p): Likewise.
	(layout::will_show_line_p): Likewise.
	(layout::print_source_line): Likewise.
	(layout::should_print_annotation_line_p): Likewise.
	(layout::print_annotation_line): Likewise.
	(layout::print_leading_fixits): Likewise.
	(layout::annotation_line_showed_range_p): Likewise.
	(struct line_corrections): Likewise for field m_row.
	(line_corrections::line_corrections): Likewise for param "row".
	(layout::print_trailing_fixits): Likewise.
	(layout::get_state_at_point): Likewise.
	(layout::get_x_bound_for_row): Likewise.
	(layout::print_line): Likewise.
	(diagnostic_show_locus): Likewise for locals "last_line" and "row".
	(selftest::diagnostic_show_locus_c_tests): Call test_line_span.
	* input.c (selftest::test_linenum_comparisons): New function.
	(selftest::input_c_tests): Call it.
	* selftest.c (selftest::test_assertions): Test ASSERT_GT,
	ASSERT_GT_AT, ASSERT_LT, and ASSERT_LT_AT.
	* selftest.h (ASSERT_GT): New macro.
	(ASSERT_GT_AT): New macro.
	(ASSERT_LT): New macro.
	(ASSERT_LT_AT): New macro.

2018-03-14  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/84780
	* combine.c (distribute_links): Don't make a link based on pc_rtx.

2018-03-14  Martin Liska  <mliska@suse.cz>

	* tree.c (record_node_allocation_statistics): Use
	get_stats_node_kind.
	(get_stats_node_kind): New function extracted from
	record_node_allocation_statistics.
	(free_node): Use get_stats_node_kind.

2018-03-14  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (compute_antic_aux): Remove code that asserts
	that the value-set of ANTIC_IN doesn't grow.

	Revert
	* tree-ssa-pre.c (struct bb_bitmap_sets): Add visited_with_visited_succs
	member.
	(BB_VISITED_WITH_VISITED_SUCCS): New define.
	(compute_antic): Initialize BB_VISITED_WITH_VISITED_SUCCS.

2018-03-14  Julia Koval  <julia.koval@intel.com>

	* config.gcc (icelake-client, icelake-server): New.
	(icelake): Remove.
	* config/i386/i386.c (initial_ix86_tune_features): Extend to 64 bit.
	(initial_ix86_arch_features): Ditto.
	(PTA_SKYLAKE): Add SGX.
	(PTA_ICELAKE): Remove.
	(PTA_ICELAKE_CLIENT): New.
	(PTA_ICELAKE_SERVER): New.
	(ix86_option_override_internal): Split up icelake on icelake client and
	icelake server.
	(get_builtin_code_for_version): Ditto.
	(fold_builtin_cpu): Ditto.
	* config/i386/driver-i386.c (config/i386/driver-i386.c): Ditto.
	* config/i386/i386-c.c (ix86_target_macros_internal): Ditto
	* config/i386/i386.h (processor_type): Ditto.
	* doc/invoke.texi: Ditto.

2018-03-14  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/83392
	* sanopt.c (maybe_optimize_ubsan_ptr_ifn): Handle also
	INTEGER_CST offset, add it together with bitpos / 8 and
	sign extend based on POINTER_SIZE.

	PR target/84844
	Revert
	2017-04-20  Uros Bizjak  <ubizjak@gmail.com>

	PR target/78090
	* config/i386/constraints.md (Yc): New register constraint.
	* config/i386/i386.md (*float<SWI48:mode><MODEF:mode>2_mixed):
	Use Yc constraint for alternative 2 of operand 0.  Remove
	preferred_for_speed attribute.

2018-03-14  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84830
	* tree-ssa-pre.c (compute_antic_aux): Intersect the new ANTIC_IN
	with the old one to avoid oscillations.

2018-03-13  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/83712
	* lra-assigns.c (find_all_spills_for): Ignore uninteresting
	pseudos.
	(assign_by_spills): Return a flag of reload assignment failure.
	Do not process the reload assignment failures.  Do not spill other
	reload pseudos if they has the same reg class.  Update n if
	necessary.
	(lra_assign): Add a return arg.  Set up from the result of
	assign_by_spills call.
	(find_reload_regno_insns, lra_split_hard_reg_for): New functions.
	* lra-constraints.c (split_reg): Add a new arg.  Use it instead of
	usage_insns if it is not NULL.
	(spill_hard_reg_in_range): New function.
	(split_if_necessary, inherit_in_ebb): Pass a new arg to split_reg.
	* lra-int.h (spill_hard_reg_in_range, lra_split_hard_reg_for): New
	function prototypes.
	(lra_assign): Change prototype.
	* lra.c (lra): Add code to deal with fails by splitting hard reg
	live ranges.

2018-03-01  Palmer Dabbelt  <palmer@sifive.com>

	* config/riscv/riscv.opt (mrelax): New option.
	* config/riscv/riscv.c (riscv_file_start): Emit ".option
	"norelax" when riscv_mrelax is disabled.
	* doc/invoke.texi (RISC-V): Document "-mrelax" and "-mno-relax".

2018-03-13  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	PR target/84743
	* config/rs6000/rs6000.c (rs6000_reassociation_width): Disable parallel
	reassociation for int modes.

2018-03-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-loop-manip.c (vect_maybe_permute_loop_masks):
	Reverse the choice between VEC_UNPACK_LO_EXPR and VEC_UNPACK_HI_EXPR
	for big-endian.
	* config/aarch64/iterators.md (hi_lanes_optab): New int attribute.
	* config/aarch64/aarch64-sve.md
	(*aarch64_sve_<perm_insn><perm_hilo><mode>): Rename to...
	(aarch64_sve_<perm_insn><perm_hilo><mode>): ...this.
	(*extend<mode><Vwide>2): Rename to...
	(aarch64_sve_extend<mode><Vwide>2): ...this.
	(vec_unpack<su>_<perm_hilo>_<mode>): Turn into a define_expand,
	renaming the old pattern to...
	(aarch64_sve_punpk<perm_hilo>_<mode>): ...this.  Only define
	unsigned packs.
	(vec_unpack<su>_<perm_hilo>_<SVE_BHSI:mode>): Turn into a
	define_expand, renaming the old pattern to...
	(aarch64_sve_<su>unpk<perm_hilo>_<SVE_BHSI:mode>): ...this.
	(*vec_unpacku_<perm_hilo>_<mode>_no_convert): Delete.
	(vec_unpacks_<perm_hilo>_<mode>): Take BYTES_BIG_ENDIAN into
	account when deciding which SVE instruction the optab should use.
	(vec_unpack<su_optab>_float_<perm_hilo>_vnx4si): Likewise.

2018-03-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.md (V4_REGNUM, V8_REGNUM, V12_REGNUM)
	(V20_REGNUM, V24_REGNUM, V28_REGNUM, P1_REGNUM, P2_REGNUM, P3_REGNUM)
	(P4_REGNUM, P5_REGNUM, P6_REGNUM, P8_REGNUM, P9_REGNUM, P10_REGNUM)
	(P11_REGNUM, P12_REGNUM, P13_REGNUM, P14_REGNUM): New define_constants.
	(tlsdesc_small_<mode>): Turn a define_expand and use
	tlsdesc_small_sve_<mode> for SVE.  Rename original define_insn to...
	(tlsdesc_small_advsimd_<mode>): ...this.
	(tlsdesc_small_sve_<mode>): New pattern.

2018-03-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/iterators.md (UNSPEC_SMUL_HIGHPART)
	(UNSPEC_UMUL_HIGHPART): New constants.
	(MUL_HIGHPART): New int iteraor.
	(su): Handle UNSPEC_SMUL_HIGHPART and UNSPEC_UMUL_HIGHPART.
	* config/aarch64/aarch64-sve.md (<su>mul<mode>3_highpart): New
	define_expand.
	(*<su>mul<mode>3_highpart): New define_insn.

2018-03-13  Eric Botcazou  <ebotcazou@adacore.com>

	PR lto/84805
	* ipa-devirt.c (odr_subtypes_equivalent_p): Do not get the ODR type of
	incomplete types.

2018-03-13  Martin Liska  <mliska@suse.cz>

	PR ipa/84658.
	* (sem_item_optimizer::sem_item_optimizer): Initialize new
	vector.
	(sem_item_optimizer::~sem_item_optimizer): Release it.
	(sem_item_optimizer::merge_classes): Register variable aliases.
	(sem_item_optimizer::fixup_pt_set): New function.
	(sem_item_optimizer::fixup_points_to_sets): Likewise.
	* ipa-icf.h: Declare new variables and functions.

2018-03-13  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/84834
	* match.pd ((A & C) != 0 ? D : 0): Use INTEGER_CST@2 instead of
	integer_pow2p@2 and test integer_pow2p in condition.
	(A < 0 ? C : 0): Similarly for @1.

	PR middle-end/84831
	* stmt.c (parse_output_constraint): If the CONSTRAINT_LEN (*p, p)
	characters starting at p contain '\0' character, don't look beyond
	that.

	PR target/84827
	* config/i386/i386.md (round<mode>2): For 387 fancy math, disable
	pattern if -ftrapping-math -fno-fp-int-builtin-inexact.

	PR target/84828
	* reg-stack.c (change_stack): Change update_end var from int to
	rtx_insn *, if non-NULL don't update just BB_END (current_block), but
	also call set_block_for_insn on the newly added insns and rescan.

	PR target/84786
	* config/i386/sse.md (sse2_loadhpd): Use Yv constraint rather than v
	on the last operand.

	PR c++/84704
	* tree.c (stabilize_reference_1): Return save_expr (e) for
	STATEMENT_LIST even if it doesn't have side-effects.

2018-03-12  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (-mclflushopt): Fix spelling of option.

2018-03-12  Renlin Li  <renlin.li@arm.com>

	* config/aarch64/aarch64.md (movhf_aarch64): Fix mode argument to
	aarch64_output_scalar_simd_mov_immediate.

2018-03-12  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83456
	* gimple-fold.c (gimple_fold_builtin_memory_op): Avoid warning
	for perfectly overlapping calls to memcpy.
	(gimple_fold_builtin_memory_chk): Same.
	(gimple_fold_builtin_strcpy): Handle no-warning.
	(gimple_fold_builtin_stxcpy_chk): Same.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Handle no-warning.

2018-03-12  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (abi_v4_pass_in_fpr): Add bool "named"
	parameter.  Use it for SFmode.
	(rs6000_function_arg_advance_1): Adjust.
	(rs6000_function_arg): Adjust.
	(rs6000_gimplify_va_arg): Pass false for that new parameter.

2018-03-12  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/84169
	PR rtl-optimization/84780
	* combine.c (can_combine_p): Check for a 2-insn combination whether
	the destination register is used between the two insns, too.

2018-03-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84803
	* tree-if-conv.c (ifcvt_memrefs_wont_trap): Don't do anything
	for refs DR analysis didn't process.

2018-03-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84777
	* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): For
	force-vectorize loops ignore whether we are optimizing for size.

2018-03-12  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_md_asm_adjust): New function.
	(TARGET_MD_ASM_ADJUST): Define.

2018-03-12  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_compute_stack_frame,
	nds32_emit_stack_push_multiple, nds32_emit_stack_pop_multiple,
	nds32_emit_stack_v3push, nds32_emit_stack_v3pop,
	nds32_emit_adjust_frame, nds32_expand_prologue, nds32_expand_epilogue,
	nds32_expand_prologue_v3push, nds32_expand_epilogue_v3pop): Refine.
	* config/nds32/nds32.h (NDS32_FIRST_CALLEE_SAVE_GPR_REGNUM,
	NDS32_LAST_CALLEE_SAVE_GPR_REGNUM, NDS32_V3PUSH_AVAILABLE_P): New.
	* config/nds32/nds32.md (prologue, epilogue): Use macro
	NDS32_V3PUSH_AVAILABLE_P to do checking.

2018-03-11  Jakub Jelinek  <jakub@redhat.com>

	PR debug/58150
	* dwarf2out.c (gen_enumeration_type_die): Don't guard adding
	DW_AT_declaration for ENUM_IS_OPAQUE on -gdwarf-4 or -gno-strict-dwarf,
	but on TYPE_SIZE.  Don't do anything for ENUM_IS_OPAQUE if not creating
	a new die.  Don't set TREE_ASM_WRITTEN if ENUM_IS_OPAQUE.  Guard
	addition of most attributes on !orig_type_die or the attribute not
	being present already.  Assert TYPE_VALUES is NULL for ENUM_IS_OPAQUE.

2018-03-11  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_cpu_cpp_builtins): Modify to define
	__NDS32_VH__ macro.
	* config/nds32/nds32.opt (mvh): New option.

2018-03-11  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-protos.h (nds32_cpu_cpp_builtins): Declare
	function.
	* config/nds32/nds32.c (nds32_cpu_cpp_builtins): New function.
	* config/nds32/nds32.h (TARGET_CPU_CPP_BUILTINS): Modify its
	definition.

2018-03-11  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-memory-manipulation.c (nds32_expand_strlen): New
	function.
	* config/nds32/nds32-multiple.md (strlensi): New pattern.
	* config/nds32/nds32-protos.h (nds32_expand_strlen): Declare function.

2018-03-11  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constants.md (unspec_element): Add UNSPEC_FFB,
	UNSPEC_FFMISM and UNSPEC_FLMISM.
	* config/nds32/nds32-intrinsic.c (bdesc_2arg): Add builtin description
	for ffb, ffmism and flmism.
	* config/nds32/nds32-intrinsic.md (unspec_ffb): Define new pattern.
	(unspec_ffmism): Ditto.
	(unspec_flmism): Ditto.
	(nds32_expand_builtin_impl): Check if string extension is available.
	* config/nds32/nds32.h (nds32_builtins): Add NDS32_BUILTIN_FFB,
	NDS32_BUILTIN_FFMISM and NDS32_BUILTIN_FLMISM.

2018-03-10  Vladimir Makarov  <vmakarov@redhat.com>

	Reverting patch:
	2018-03-09  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/83712
	* lra-assigns.c (assign_by_spills): Return a flag of reload
	assignment failure.  Do not process the reload assignment
	failures.  Do not spill other reload pseudos if they has the same
	reg class.
	(lra_assign): Add a return arg.  Set up from the result of
	assign_by_spills call.
	(find_reload_regno_insns, lra_split_hard_reg_for): New functions.
	* lra-constraints.c (split_reg): Add a new arg.  Use it instead of
	usage_insns if it is not NULL.
	(spill_hard_reg_in_range): New function.
	(split_if_necessary, inherit_in_ebb): Pass a new arg to split_reg.
	* lra-int.h (spill_hard_reg_in_range, lra_split_hard_reg_for): New
	function prototypes.
	(lra_assign): Change prototype.
	* lra.c (lra): Add code to deal with fails by splitting hard reg
	live ranges.

2018-03-10  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84807
	* config/i386/i386.opt: Replace Enforcment with Enforcement.

2018-03-10  Alexandre Oliva  <aoliva@redhat.com>

	PR debug/84620
	* dwarf2out.h (dw_val_class): Add dw_val_class_symview.
	(dw_val_node): Add val_symbolic_view.
	* dwarf2out.c (dw_line_info_table): Add symviews_since_reset.
	(symview_upper_bound): New.
	(new_line_info_table): Initialize symviews_since_reset.
	(dwarf2out_source_line): Count symviews_since_reset and set
	symview_upper_bound.
	(dw_val_equal_p): Handle symview.
	(add_AT_symview): New.
	(print_dw_val): Handle symview.
	(attr_checksum, attr_checksum_ordered): Likewise.
	(same_dw_val_p, size_of_die): Likewise.
	(value_format, output_die): Likewise.
	(add_high_low_attributes): Use add_AT_symview for entry_view.
	(dwarf2out_finish): Reset symview_upper_bound, clear
	zero_view_p.

2018-03-09  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83969
	* config/rs6000/rs6000.c (rs6000_offsettable_memref_p): New prototype.
	Add strict argument and use it.
	(rs6000_split_multireg_move): Update for new strict argument.
	(mem_operand_gpr): Disallow all non-offsettable addresses.
	* config/rs6000/rs6000.md (*movdi_internal64): Use YZ constraint.

2018-03-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/84772
	* config/rs6000/rs6000.c (rs6000_gimplify_va_arg): Mark va_arg_tmp
	temporary TREE_ADDRESSABLE before gimplification of BUILT_IN_MEMCPY.
	* config/powerpcspe/powerpcspe.c (rs6000_gimplify_va_arg): Likewise.

	PR c++/84767
	* tree-inline.c (copy_tree_body_r): For INDIRECT_REF of a remapped
	decl, use remap_type if we want to use the type.

2018-03-09  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84526
	* gimple-ssa-warn-restrict.c (builtin_memref::set_base_and_offset):
	Remove dead code.
	(builtin_access::generic_overlap): Be prepared to handle non-array
	base objects.

2018-03-09  Alexandre Oliva  <aoliva@redhat.com>

	PR rtl-optimization/84682
	* lra-constraints.c (process_address_1): Check is_address flag
	for address constraints.
	(process_alt_operands): Likewise.
	* lra.c (lra_set_insn_recog_data): Pass asm operand locs to
	preprocess_constraints.
	* recog.h (preprocess_constraints): Add oploc parameter.
	Adjust callers.
	* recog.c (preprocess_constraints): Test address_operand for
	CT_ADDRESS constraints.

2018-03-09  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/83712
	* lra-assigns.c (assign_by_spills): Return a flag of reload
	assignment failure.  Do not process the reload assignment
	failures.  Do not spill other reload pseudos if they has the same
	reg class.
	(lra_assign): Add a return arg.  Set up from the result of
	assign_by_spills call.
	(find_reload_regno_insns, lra_split_hard_reg_for): New functions.
	* lra-constraints.c (split_reg): Add a new arg.  Use it instead of
	usage_insns if it is not NULL.
	(spill_hard_reg_in_range): New function.
	(split_if_necessary, inherit_in_ebb): Pass a new arg to split_reg.
	* lra-int.h (spill_hard_reg_in_range, lra_split_hard_reg_for): New
	function prototypes.
	(lra_assign): Change prototype.
	* lra.c (lra): Add code to deal with fails by splitting hard reg
	live ranges.

2018-03-09  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/83193
	* common/config/arm/arm-common.c (arm_parse_arch_option_name):
	Accept complain bool parameter.  Only emit errors if it is true.
	(arm_parse_cpu_option_name): Likewise.
	(arm_target_thumb_only): Adjust callers of the above.
	* config/arm/arm-protos.h (arm_parse_cpu_option_name): Adjust
	prototype to take a default true bool parameter.
	(arm_parse_arch_option_name): Likewise.

2018-03-09  David Malcolm  <dmalcolm@redhat.com>
	    Francois-Xavier Coudert  <fxcoudert@gcc.gnu.org>

	PR jit/64089
	PR jit/84288
	* Makefile.in (LD_VERSION_SCRIPT_OPTION, LD_SONAME_OPTION): New.
	* configure: Regenerate.
	* configure.ac ("linker --version-script option"): New.
	("linker soname option"): New.

2018-03-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84775
	* tree-if-conv.c (add_bb_predicate_gimplified_stmts): Delink
	immediate uses of predicate stmts and mark them modified.

	Revert
	PR tree-optimization/84178
	* tree-if-conv.c (combine_blocks): Move insert_gimplified_predicates
	to caller.
	(version_loop_for_if_conversion): Delay update_ssa call.
	(tree_if_conversion): Delay update_ssa until after predicate
	insertion.

2018-03-09  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/84763
	* config/i386/winnt.c (i386_pe_seh_cold_init): Use small pre-allocation
	when the function accesses prior frames.

2018-03-08  Jakub Jelinek  <jakub@redhat.com>

	PR debug/84456
	* dwarf2out.c (dw_loc_list): If list && loc_list->first->next, call
	gen_llsym, otherwise call maybe_gen_llsym.

	PR inline-asm/84742
	* recog.c (asm_operand_ok): Return 0 if multi-character constraint
	has ',' character inside of it.

2018-03-08  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/84748
	* config/aarch64/aarch64.md (*compare_cstore<mode>_insn): Mark pattern
	as clobbering CC_REGNUM.

2018-03-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/84552
	* tree-scalar-evolution.c: Include tree-into-ssa.h.
	(follow_copies_to_constant): Do not follow SSA names registered
	for update.

2018-03-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84178
	* tree-if-conv.c (combine_blocks): Move insert_gimplified_predicates
	to caller.
	(version_loop_for_if_conversion): Delay update_ssa call.
	(tree_if_conversion): Delay update_ssa until after predicate
	insertion.

2018-03-08  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/84178
	* tree-if-conv.c (release_bb_predicate): Remove the
	the assertion that the stmts have NULL use_ops.
	Discard the statements, asserting that they haven't
	yet been added to a BB.

2018-03-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84746
	* tree-ssa-pre.c (find_leader_in_sets): Deal with SET1 being NULL.
	(phi_translate): Pass in destination ANTIC_OUT set.
	(phi_translate_1): Likewise.  For a simplified result lookup
	a leader in ANTIC_OUT and AVAIL_OUT, not the ANTIC_IN sets.
	(phi_translate_set): Adjust.
	(do_pre_regular_insertion): Likewise.
	(do_pre_partial_partial_insertion): Likewise.

2018-03-08  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84735
	* doc/gcov.texi: Document usage of profile files.
	* gcov-io.h: Document changes in the format.

2018-03-08  Alexandre Oliva  <aoliva@redhat.com>

	PR debug/84404
	PR debug/84408
	* dwarf2out.c (struct dw_line_info_table): Update comments for
	view == -1.
	(FORCE_RESET_NEXT_VIEW): New.
	(FORCE_RESETTING_VIEW_P): New.
	(RESETTING_VIEW_P): Check for -1 too.
	(ZERO_VIEW_P): Likewise.
	(new_line_info_table): Force-reset next view.
	(dwarf2out_begin_function): Likewise.
	(dwarf2out_source_line): Simplify zero_view_p initialization.
	Test FORCE_RESETTING_VIEW_P and RESETTING_VIEW_P instead of
	view directly.  Omit view when omitting .loc at line 0.

2018-03-08  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84740
	* tree-switch-conversion.c (process_switch): Call build_constructors
	only if info.phi_count is non-zero.

	PR tree-optimization/84739
	* tree-tailcall.c (find_tail_calls): Check call arguments against
	DECL_ARGUMENTS (current_function_decl) rather than
	DECL_ARGUMENTS (func) when checking for tail recursion.

2018-03-07  Jakub Jelinek  <jakub@redhat.com>

	* doc/contrib.texi: Add entries for Martin Liska, David Malcolm,
	Marek Polacek, extend Vladimir Makarov's, Jonathan Wakely's and
	Volker Reichelt's entry and add entries for people that perform
	GCC fuzzy testing and report numerous bugs.

2018-03-07  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/82411
	* config/rs6000/rs6000.c (rs6000_elf_in_small_data_p): Don't put
	readonly data in sdata, if that is disabled.
	* config/rs6000/sysv4.opt (mreadonly-in-sdata): New option.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Document
	-mreadonly-in-sdata option.

2018-03-07  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84468
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Consider successor
	basic block when looking for nul assignment.

2018-03-07  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/84277
	* except.h (output_function_exception_table): Adjust prototype.
	* except.c (output_function_exception_table): Remove FNNAME parameter
	and add SECTION parameter.  Ouput one part of the table at a time.
	* final.c (final_scan_insn_1) <NOTE_INSN_SWITCH_TEXT_SECTIONS>: Output
	the first part of the exception table and emit unwind directives.
	* config/i386/i386-protos.h (i386_pe_end_cold_function): Declare.
	(i386_pe_seh_cold_init): Likewise.
	* config/i386/cygming.h (ASM_DECLARE_COLD_FUNCTION_NAME): New macro.
	(ASM_DECLARE_COLD_FUNCTION_SIZE): Likewise.
	* config/i386/i386.c (x86_expand_epilogue): Fix wording in comment.
	(ix86_output_call_insn): Emit a nop in one more case for SEH.
	* config/i386/winnt.c: Include except.h.
	(struct seh_frame_state): Add reg_offset, after_prologue and
	in_cold_section fields.
	(i386_pe_seh_end_prologue): Set seh->after_prologue.
	(i386_pe_seh_cold_init): New function.
	(i386_pe_seh_fini): Add COLD parameter and bail out if it is not equal
	to seh->in_cold_section.
	(seh_emit_push): Record the offset of the push.
	(seh_emit_save): Record the offet of the save.
	(i386_pe_seh_unwind_emit): Deal with NOTE_INSN_SWITCH_TEXT_SECTIONS.
	Test seh->after_prologue to disregard the epilogue.
	(i386_pe_end_function): Pass FALSE to i386_pe_seh_fini.
	(i386_pe_end_cold_function): New function.

2018-03-07  Jakub Jelinek  <jakub@redhat.com>

	PR fortran/84565
	* config/aarch64/predicates.md (aarch64_simd_reg_or_zero): Use
	aarch64_simd_or_scalar_imm_zero rather than aarch64_simd_imm_zero.

	PR c++/84704
	* gimple-expr.c (create_tmp_var_raw): Set DECL_NAMELESS flag
	on tmp_var.
	* tree-pretty-print.c (dump_decl_name): For TDF_COMPARE_DEBUG,
	don't print names of DECL_NAMELESS DECL_IGNORED_P decls.

	PR middle-end/84723
	* multiple_target.c: Include tree-inline.h and intl.h.
	(expand_target_clones): Diagnose and fail if node->definition and
	!tree_versionable_function_p (node->decl).

2018-03-06  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.h (ASM_GENERATE_INTERNAL_LABEL): Revise to use
	sprint_ul.
	(ASM_OUTPUT_ADDR_VEC_ELT): Revise for above change.
	(ASM_OUTPUT_ADDR_DIFF_ELT): Likewise.
	* config/pa/pa64-hpux.h (ASM_GENERATE_INTERNAL_LABEL): Revise as above.

2018-03-06  Jakub Jelinek  <jakub@redhat.com>

	PR target/84710
	* combine.c (try_combine): Use reg_or_subregno instead of handling
	just paradoxical SUBREGs and REGs.

2018-03-06  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_finalize_pic): Remove function.
	(arc_must_save_register): We use single base PIC register, remove
	checks to save/restore the PIC register.
	(arc_expand_prologue): Likewise.
	* config/arc/arc-protos.h (arc_set_default_type_attributes):
	Remove.
	(arc_verify_short): Likewise.
	(arc_attr_type): Likewise.
	* config/arc/arc.c (arc_set_default_type_attributes): Remove.
	(walk_stores): Likewise.
	(arc_address_cost): Make it static.
	(arc_verify_short): Likewise.
	(branch_dest): Likewise.
	(arc_attr_type): Likewise.
	* config/arc/arc.c (TARGET_ADJUST_INSN_LENGTH): Remove.
	(TARGET_INSN_LENGTH_PARAMETERS): Likewise.
	(arc_final_prescan_insn): Remove inserting the nops due to
	hardware hazards.  It is done in reorg step.
	(insn_length_variant_t): Remove.
	(insn_length_parameters_t): Likewise.
	(arc_insn_length_parameters): Likewise.
	(arc_get_insn_variants): Likewise.
	* config/arc/arc.h (TARGET_UPSIZE_DBR): Remove.

2018-03-06  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/84683
	* reg-stack.c (move_for_stack_reg): If any_malformed_asm, avoid
	assertion failure.

	PR tree-optimization/84687
	* omp-simd-clone.c (simd_clone_create): Clear DECL_BUILT_IN_CLASS
	on new_node->decl.
	* match.pd (pow(C,x)*expN(y) -> expN(logN(C)*x+y)): New optimization.

2018-03-05  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000-builtin.def (rs6000_speculation_barrier):
	Rename to ppc_speculation_barrier.
	* config/rs6000/rs6000.c (rs6000_init_builtins): Rename builtin to
	__builtin_ppc_speculation_barrier.

2018-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/84700
	* combine.c (combine_simplify_rtx): Don't try to simplify if
	if_then_else_cond returned non-NULL, but either true_rtx or false_rtx
	are equal to x.

2018-03-05  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_loop_align): Don't align tiny loops
	to 32 bytes when compiling for POWER9.

2018-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/84564
	* config/i386/i386.c (ix86_function_ok_for_sibcall): Check for
	regparm >= 3 with no arg reg available also for calls with
	flag_force_indirect_call.  Pass decl to ix86_function_regparm.

	PR target/84524
	* config/i386/sse.md (*<code><mode>3): Replace <mask_prefix3> with
	orig,vex.
	(*<plusminus_insn><mode>3): Likewise.  Remove <mask_operand3> uses.

2018-03-05  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/84264
	* config/rs6000/vector.md (mov<mode>): Disallow altivec memory operands.

2018-03-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84486
	* tree-ssa-pre.c (create_expression_by_pieces): Remove dead code.
	When inserting a __builtin_assume_aligned call set the LHS
	SSA name alignment info accordingly.

2018-03-05  Wilco Dijkstra  <wdijkstr@arm.com>

	PR tree-optimization/84114
	* config/aarch64/aarch64.c (aarch64_reassociation_width)
	Avoid reassociation of FLOAT_MODE addition.

2018-03-05  Olga Makhotina  <olga.makhotina@intel.com>

	* common/config/i386/i386-common.c (OPTION_MASK_ISA_PCONFIG_SET,
	OPTION_MASK_ISA_PCONFIG_UNSET, OPTION_MASK_ISA_WBNOINVD_SET,
	OPTION_MASK_ISA_WBNOINVD_UNSET): New definitions.
	(ix86_handle_option): Handle -mpconfig and -mwbnoinvd.
	* config.gcc (pconfigintrin.h, wbnoinvdintrin.h) : Add headers.
	* config/i386/cpuid.h (bit_PCONFIG, bit_WBNOINVD): New.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect -mpconfig
	and -mwbnoinvd.
	* config/i386/i386-builtin.def (__builtin_ia32_wbnoinvd,
	__builtin_ia32_wbinvd): New builtins.
	(SPECIAL_ARGS2): New.
	* config/i386/i386-c.c (__WBNOINVD__, __PCONFIG__): New.
	(SPECIAL_ARGS2): New.
	* config/i386/i386.c (ix86_target_string): Add -mpconfig and -mwbnoinvd.
	(ix86_valid_target_attribute_inner_p): Ditto.
	(ix86_init_mmx_sse_builtins): Add special_args2.
	* config/i386/i386.h (TARGET_PCONFIG, TARGET_PCONFIG_P, TARGET_WBNOINVD,
	TARGET_WBNOINVD_P): New.
	* config/i386/i386.md (UNSPECV_WBINVD, UNSPECV_WBNOINVD): New.
	(define_insn "wbinvd", define_insn "wbnoinvd"): New.
	* config/i386/i386.opt: Add -mpconfig and -mwbnoinvd.
	* config/i386/immintrin.h (_wbinvd): New intrinsic.
	* config/i386/pconfigintrin.h: New file.
	* config/i386/wbnoinvdintrin.h: Ditto.
	* config/i386/x86intrin.h: Add headers pconfigintrin.h and
	wbnoinvdintrin.h.
	* doc/invoke.texi (-mpconfig, -mwbnoinvd): New.

2018-03-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84670
	* tree-ssa-pre.c (struct bb_bitmap_sets): Add visited_with_visited_succs
	member.
	(BB_VISITED_WITH_VISITED_SUCCS): New define.
	(compute_antic): Initialize BB_VISITED_WITH_VISITED_SUCCS.
	(compute_antic_aux): Only assert the number of values in ANTIC_IN
	doesn't grow if all successors (recursively) were visited at least
	once.

2018-03-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84650
	* tree-ssa-loop-im.c (pass_lim::execute): Reset the SCEV cache
	if executed in the loop pipeline.

2018-03-05  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/configfiles.texi (Configuration Files): Move info about
	conditionalizing $target-protos.h to...
	* doc/sourcebuild.texi (Back End): Here.  Explain how $target.h
	differs from $target-protos.h.

2018-03-05  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-protos.h (nds32_expand_setmem): Declare.
	* config/nds32/nds32-multiple.md (setmemsi): Define.
	* config/nds32/nds32-memory-manipulation.c
	(nds32_gen_dup_4_byte_to_word_value): New.
	(emit_setmem_word_loop): New.
	(emit_setmem_byte_loop): New.
	(nds32_expand_setmem_loop): New.
	(nds32_expand_setmem_loop_v3m): New.
	(nds32_expand_setmem_unroll): New.
	(nds32_expand_setmem): New.

2018-03-04  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-memory-manipulation.c
	(nds32_emit_load_store): New.
	(nds32_emit_post_inc_load_store): New.
	(nds32_emit_mem_move): New.
	(nds32_emit_mem_move_block): New.
	(nds32_expand_movmemsi_loop_unknown_size): New.
	(nds32_expand_movmemsi_loop_known_size): New.
	(nds32_expand_movmemsi_loop): New.
	(nds32_expand_movmemsi_unroll): New.
	(nds32_expand_movmemqi): Rename ...
	(nds32_expand_movmemsi): ... to this.
	* config/nds32/nds32-multiple.md (movmemqi): Rename ...
	(movmemsi): ... to this.
	* config/nds32/nds32-protos.h (nds32_expand_movmemqi): Rename ...
	(nds32_expand_movmemsi): ... to this.

2018-03-04  Kito Cheng  <kito.cheng@gmail.com>
	    Monk Chiang  <sh.chiang04@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-protos.h
	(nds32_expand_load_multiple): New arguments.
	(nds32_expand_store_multiple): Ditto.
	(nds32_valid_multiple_load_store): Rename ...
	(nds32_valid_multiple_load_store_p): ... to this.
	* config/nds32/nds32-memory-manipulation.c
	(nds32_expand_load_multiple): Refine implementation.
	(nds32_expand_store_multiple): Ditto.
	* config/nds32/nds32-multiple.md
	(load_multiple): Update nds32_expand_load_multiple interface.
	(store_multiple): Update nds32_expand_store_multiple interface.
	* config/nds32/nds32-predicates.c
	(nds32_valid_multiple_load_store): Rename ...
	(nds32_valid_multiple_load_store_p): ... to this and refine
	implementation.
	* config/nds32/predicates.md
	(nds32_load_multiple_and_update_address_operation): New predicate.
	(nds32_store_multiple_and_update_address_operation): New predicate.

2018-03-04  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (type): Add load_multiple and store_multiple.
	(combo): New attribute.
	* config/nds32/nds32-multiple.md: Refine patterns with new attributes.

2018-03-03  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.opt: Change -mcmodel= default value.

2018-03-03  Kito Cheng  <kito.cheng@gmail.com>
	    Monk Chiang  <sh.chiang04@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/constants.md (unspec_element): New enum.
	* config/nds32/constraints.md (Umw): New constraint.
	* config/nds32/nds32-intrinsic.c: Add more builtin functions.
	* config/nds32/nds32-intrinsic.md: Likewise.
	* config/nds32/nds32-md-auxiliary.c (nds32_regno_to_enable4): New.
	(nds32_valid_smw_lwm_base_p): New.
	(nds32_output_smw_single_word): New.
	(nds32_output_lmw_single_word): New.
	(nds32_expand_unaligned_load): New.
	(nds32_expand_unaligned_store): New.
	* config/nds32/nds32-protos.h (nds32_valid_smw_lwm_base_p): Declare.
	(nds32_output_smw_single_word): Declare.
	(nds32_output_lmw_single_word): Declare.
	(nds32_expand_unaligned_load): Declare.
	(nds32_expand_unaligned_store): Declare.
	* config/nds32/nds32.h (nds32_builtins): Add NDS32_BUILTIN_UALOAD_HW,
	NDS32_BUILTIN_UALOAD_W, NDS32_BUILTIN_UALOAD_DW,
	NDS32_BUILTIN_UASTORE_HW, NDS32_BUILTIN_UASTORE_W,
	NDS32_BUILTIN_UASTORE_DW.
	* config/nds32/predicates.md (nds32_lmw_smw_base_operand): New
	predicate.

2018-03-03  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-intrinsic.c
	(nds32_expand_builtin_null_ftype_reg): Delete.
	(nds32_expand_builtin_reg_ftype_imm): Ditto.
	(nds32_expand_builtin_null_ftype_reg_imm): Ditto.
	(nds32_read_argument): New.
	(nds32_legitimize_target): Ditto.
	(nds32_legitimize_argument): Ditto.
	(nds32_check_constant_argument): Ditto.
	(nds32_expand_unop_builtin): Ditto.
	(nds32_expand_unopimm_builtin): Ditto.
	(nds32_expand_binop_builtin): Ditto.
	(nds32_builtin_decl_impl): Ditto.
	(builtin_description): Ditto.
	(nds32_expand_builtin_impl): Rewrite with new infrastructure.
	(nds32_init_builtins_impl): Ditto.
	* config/nds32/nds32.c (TARGET_BUILTIN_DECL): Define.
	(nds32_builtin_decl): New.
	* config/nds32/nds32.h (nds32_builtins): Add NDS32_BUILTIN_COUNT.
	* config/nds32/nds32-protos.h (nds32_builtin_decl_impl): Declare.

2018-03-02  Jeff Law  <law@redhat.com>

	* reorg.c (stop_search_p): Handle DEBUG_INSN.
	(redundant_insn, fill_simple_delay_slots): Likewise.
	(fill_slots_from_thread): Likewise.
	* resource.c (mark_referenced_resources): Likewise.
	(mark_set_resources, find_dead_or_set_registers): Likewise.

2018-03-02  Jakub Jelinek  <jakub@redhat.com>

	* substring-locations.h (format_warning_va): Formatting fix for
	ATTRIBUTE_GCC_DIAG.
	(format_warning_at_substring): Fix up ATTRIBUTE_GCC_DIAG second
	argument.
	(format_warning_n_va, format_warning_at_substring_n): New prototypes.
	* substring-locations.c: Include intl.h.
	(format_warning_va): Turned into small wrapper around
	format_warning_n_va, renamed to ...
	(format_warning_n_va): ... this, add N and PLURAL_GMSGID arguments,
	rename GMSGID to SINGULAR_GMSGID, if SINGULAR_GMSGID != PLURAL_GMSGID,
	use ngettext.
	(format_warning_at_substring_n): New function.
	* gimple-ssa-sprintf.c: Remove GCC diagnostic ignored pragma.
	(fmtwarn): Add ATTRIBUTE_GCC_DIAG.  Turn into a copy of
	format_warning_at_substring with just a shorter name instead of
	const function pointer.
	(fmtwarn_n): New function.
	(maybe_warn, format_directive, parse_directive): Use fmtwarn_n where
	appropriate, get rid of all the fmtstr temporaries, move conditionals
	with G_() wrapped string literals directly into fmtwarn arguments,
	cast dir.len to (int), formatting fixes.

2018-03-02  Thomas Schwinge  <thomas@codesourcery.com>

	* doc/invoke.texi: Remove "Cilk Plus" references.

2018-03-02  Jakub Jelinek  <jakub@redhat.com>
	    Richard Biener  <rguenther@suse.de>

	PR ipa/84628
	* expr.c (expand_expr_real_1) <case CALL_EXPR>: Don't emit diagnostics
	for error or warning attributes if CALL_FROM_THUNK_P is set.
	Formatting fixes.

2018-03-02  Jakub Jelinek  <jakub@redhat.com>

	PR target/56540
	* config/pa/pa.h (TARGET_CPU_CPP_BUILTINS): Predefine
	__SIZEOF_128__ macro if HPUX_LONG_DOUBLE_LIBRARY.

	PR target/56540
	* config/ia64/ia64.h (TARGET_CPU_CPP_BUILTINS): Predefine
	__SIZEOF_{FPREG,FLOAT{80,128}}__ macros.

	* predict.c (test_prediction_value_range): Use PROB_UNINITIALIZED
	instead of -1U in last predictors element's probability member.

2018-03-02  Eric Botcazou  <ebotcazou@adacore.com>

	PR ipa/83983
	* ipa-devirt.c (odr_subtypes_equivalent_p): Get the ODR type of both
	arguments if they are comparable.

2018-03-02  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84634
	* tree-vect-stmts.c (vectorizable_store, vectorizable_load): Replace
	masks and masked_loop_p with a single loop_masks, making sure it's
	null for bb vectorization.

2018-03-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-data-refs.c (vect_analyze_data_ref_dependence)
	(vect_analyze_data_ref_access): Use loop->safe_len rather than
	loop->force_vectorize to check whether there is no alias.

2018-03-02  Jakub Jelinek  <jakub@redhat.com>

	PR target/84614
	* rtl.h (prev_real_nondebug_insn, next_real_nondebug_insn): New
	prototypes.
	* emit-rtl.c (next_real_insn, prev_real_insn): Fix up function
	comments.
	(next_real_nondebug_insn, prev_real_nondebug_insn): New functions.
	* cfgcleanup.c (try_head_merge_bb): Use prev_real_nondebug_insn
	instead of a loop around prev_real_insn.
	* combine.c (move_deaths): Use prev_real_nondebug_insn instead of
	prev_real_insn.

	PR inline-asm/84625
	* config/i386/i386.c (ix86_print_operand): Use conditional
	output_operand_lossage instead of gcc_assert if CONST_VECTOR is not
	zero vector.

2018-03-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84427
	* tree-ssa-pre.c (bitmap_remove_expr_from_set): Remove.
	(bitmap_set_subtract_values): Rewrite to handle multiple
	exprs per value.
	(clean): Likewise.
	(prune_clobbered_mems): Likewise.
	(phi_translate): Take edge instead of pred/phiblock.
	(phi_translate_1): Likewise.
	(phi_translate_set): Likewise.  Insert all translated
	exprs for a value into the set, keeping possibly multiple
	expressions per value.
	(compute_antic_aux): Adjust for phi_translate changes.
	When intersecting union the expressions and prune those
	not in the final value set, keeping possibly multiple
	expressions per value.  Do not use value-insertion
	for unioning ANTIC_OUT U EXP_GEN - TMP_GEN but merge
	all expressions.  Add verification that the value-sets
	only shrink during iteration.
	(compute_partial_antic_aux): Adjust for the phi_translate changes.
	(do_pre_regular_insertion): Likewise.
	(do_pre_partial_partial_insertion): Likewise.

2018-03-02  Richard Biener  <rguenther@suse.de>

	PR target/82005
	* config/darwin.c (saved_debug_info_level): New static global.
	(darwin_asm_lto_start): Disable debug info generation for LTO out.
	(darwin_asm_lto_end): Restore debug info generation settings.

2018-03-01  Martin Liska  <mliska@suse.cz>

	PR sanitizer/82484
	* sanopt.c (sanitize_rewrite_addressable_params): Do not handle
	volatile arguments.

2018-03-01  Richard Biener  <rguenther@suse.de>

	PR debug/84645
	* dwarf2out.c (gen_variable_die): Properly handle late VLA
	type annotation with LTO when debug was disabled at compile-time.

2018-03-01  Matthew Fortune  <mfortune@gmail.com>

	* config/mips/mips.c (mips_final_prescan_insn): Fix incorrect
	XINT with INTVAL.
	(mips_final_postscan_insn): Likewise.

2018-03-01  Richard Sandiford  <richard.sandiford@linaro.org>

	PR rtl-optimization/84528
	* alias.c (init_alias_target): Add commentary.
	(init_alias_analysis): Only give HARD_FRAME_POINTER_REGNUM
	a unique base value if the frame pointer is not eliminated
	to the stack pointer.

2018-03-01  Tom de Vries  <tom@codesourcery.com>

	PR rtl-optimization/83327
	* lra-int.h (hard_regs_spilled_into): Declare.
	* lra.c (hard_regs_spilled_into): Define.
	(init_reg_info): Init hard_regs_spilled_into.
	* lra-spills.c (assign_spill_hard_regs): Update hard_regs_spilled_into.
	* lra-lives.c (make_hard_regno_born, make_hard_regno_dead)
	(process_bb_lives): Handle hard_regs_spilled_into.
	(lra_create_live_ranges_1): Before doing liveness propagation, clear
	regs in all_hard_regs_bitmap if set in hard_regs_spilled_into.

2018-02-28  David Edelsohn  <dje.gcc@gmail.com>

	* config.gcc (powerpc-ibm-aix7.1.*): New stanza.
	(powerpc-ibm-aix[789]*): Default to AIX 7.2.
	* config/rs6000/aix71.h (TARGET_DEFAULT): Revert to Power4 ISA.
	* config/rs6000/aix72.h: New file.

2018-02-28  Jakub Jelinek  <jakub@redhat.com>

	* gimple-ssa-warn-restrict.c (maybe_diag_overlap): Use warning_n
	instead of warning_at with conditional singular and plural messages
	where possible.

	PR target/52991
	* stor-layout.c (update_alignment_for_field): For
	targetm.ms_bitfield_layout_p (rli->t), if !is_bitfield
	&& !DECL_PACKED (field), do the alignment update, just use
	only desired_align instead of MAX (type_align, desired_align)
	as the alignment.
	(place_field): Don't do known_align < desired_align handling
	early if targetm.ms_bitfield_layout_p (rli->t) and rli->prev_field
	is non-NULL, instead do it after rli->prev_field handling and
	only if not within a bitfield word.  For DECL_PACKED (field)
	use type_align of BITS_PER_UNIT.

2018-02-28  Eric Botcazou  <ebotcazou@adacore.com>

	* config/aarch64/aarch64.c (aarch64_emit_probe_stack_range): Remove
	superfluous parentheses and trailing spaces.

2018-02-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84584
	* graphite-scop-detection.c (scop_detection::add_scop): Discard
	SCoPs with fake exit edge.

2018-02-28  Martin Liska  <mliska@suse.cz>

	PR testsuite/84597
	* timevar.c (timer::print): Fix format to properly print 100%
	values.

2018-02-28  Richard Biener  <rguenther@suse.de>

	PR middle-end/84607
	* genmatch.c (capture_info::walk_match): Do not mark
	captured expressions without operands as expr_p given
	they act more like predicates and should be subject to
	"lost tail" side-effect preserving.

2018-02-28  Alexandre Oliva  <aoliva@redhat.com>

	PR rtl-optimization/81611
	* auto-inc-dec.c (attempt_change): Move dead note from
	mem_insn if it's the next use of regno
	(find_address): Take address use of reg holding
	non-incremented value.  Add parm to limit search to the named
	reg only.
	(merge_in_block): Attempt to use a mem insn that is the next
	use of the original regno.

2018-02-27  Martin Sebor  <msebor@redhat.com>

	PR c++/83871
	* doc/invoke.texi (-Wmissing-attributes): New option.
	* print-tree.c (print_node): Handle DECL_UNINLINABLE.

2018-02-27  Martin Sebor  <msebor@redhat.com>

	PR translation/84207
	* diagnostic-core.h (warning_n, error_n, inform_n): Change
	n argument to unsigned HOST_WIDE_INT.
	* diagnostic.c (warning_n, error_n, inform_n): Ditto.
	(diagnostic_n_impl): Ditto.  Handle arguments in excess of LONG_MAX.
	* gimple-ssa-sprintf.c (format_directive): Simplify inform_n call.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Use warning_n.

2018-02-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84512
	* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost):
	Do not use the estimate returned from record_stmt_cost for
	the scalar iteration cost but sum properly using add_stmt_cost.

2018-02-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84466
	* graphite-scop-detection.c (scop_detection::stmt_simple_for_scop_p):
	Adjust last change to less strictly validate use operands.

2018-02-27  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84548
	* gcov.c (process_file): Allow partial overlap and consider it
	also as group functions.
	(output_lines): Properly calculate range of lines for a group.

2018-02-27  Martin Liska  <mliska@suse.cz>

	* timevar.c (timer::print_row): Remove 'usr', 'sys', 'wall' and
	'ggc' suffixes.  Change first column width.
	(timer::print): Fix formatting of the column.

2018-02-27  Alexandre Oliva  <aoliva@redhat.com>

	* tree-ssa-live.c (remove_unused_scope_block_p): Do not
	preserve inline entry blocks for the sake of debug inline
	entry point markers alone.
	(remove_unused_locals): Suggest in comments a better place to
	force the preservation of inline entry blocks that are
	otherwise unused, but do not preserve them.

2018-02-26  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (ix86_output_indirect_jmp): Update comments.

2018-02-26  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84039
	* config/i386/constraints.md (Bs): Replace
	ix86_indirect_branch_register with
	TARGET_INDIRECT_BRANCH_REGISTER.
	(Bw): Likewise.
	* config/i386/i386.md (indirect_jump): Likewise.
	(tablejump): Likewise.
	(*sibcall_memory): Likewise.
	(*sibcall_value_memory): Likewise.
	Peepholes of indirect call and jump via memory: Likewise.
	(*sibcall_GOT_32): Disallowed for TARGET_INDIRECT_BRANCH_REGISTER.
	(*sibcall_value_GOT_32): Likewise.
	* config/i386/predicates.md (indirect_branch_operand): Likewise.
	(GOT_memory_operand): Likewise.
	(call_insn_operand): Likewise.
	(sibcall_insn_operand): Likewise.
	(GOT32_symbol_operand): Likewise.
	* config/i386/i386.h (TARGET_INDIRECT_BRANCH_REGISTER): New.

2018-02-26  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/83496
	* reorg.c (steal_delay_list_from_target): Change REDUNDANT array from
	booleans to RTXes.  Call fix_reg_dead_note on every non-null element.
	(steal_delay_list_from_fallthrough): Call fix_reg_dead_note on a
	redundant insn, if any.
	(relax_delay_slots): Likewise.
	(update_reg_unused_notes): Rename REDUNDANT_INSN to OTHER_INSN.

2018-02-26  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83965
	* tree-vect-patterns.c (vect_reassociating_reduction_p): Assume
	that grouped statements are part of a reduction chain.  Return
	true if the statement is not marked as a reduction itself but
	is part of a group.
	(vect_recog_dot_prod_pattern): Don't check whether the statement
	is part of a group here.
	(vect_recog_sad_pattern): Likewise.
	(vect_recog_widen_sum_pattern): Likewise.

2018-02-26  Eric Botcazou  <ebotcazou@adacore.com>

	PR debug/84545
	* final.c (rest_of_clean_state): Also look for calls inside sequences.

2018-02-26  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84530
	* config/i386/i386-protos.h (ix86_output_indirect_jmp): Remove
	the bool argument.
	(ix86_output_indirect_function_return): New prototype.
	(ix86_split_simple_return_pop_internal): Likewise.
	* config/i386/i386.c (indirect_return_via_cx): New.
	(indirect_return_via_cx_bnd): Likewise.
	(indirect_thunk_name): Handle return va CX_REG.
	(output_indirect_thunk_function): Create alias for
	__x86_return_thunk_[re]cx and __x86_return_thunk_[re]cx_bnd.
	(ix86_output_indirect_jmp): Remove the bool argument.
	(ix86_output_indirect_function_return): New function.
	(ix86_split_simple_return_pop_internal): Likewise.
	* config/i386/i386.md (*indirect_jump): Don't pass false
	to ix86_output_indirect_jmp.
	(*tablejump_1): Likewise.
	(simple_return_pop_internal): Change it to define_insn_and_split.
	Call ix86_split_simple_return_pop_internal to split it for
	-mfunction-return=.
	(simple_return_indirect_internal): Call
	ix86_output_indirect_function_return instead of
	ix86_output_indirect_jmp.

2018-02-26  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/84405
	* vec.h (vec_default_construct): For BROKEN_VALUE_INITIALIZATION use
	memset and value initialization afterwards.

2018-02-26  Christophe Lyon  <christophe.lyon@linaro.org>

	* Makefile.in (lto-wrapper): Use ALL_LINKERFLAGS.

2018-02-26  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	PR target/84521
	* common/config/aarch64/aarch64-common.c
	(aarch_option_optimization_table[]): Switch
	off fomit-frame-pointer

2018-02-26  Kito Cheng  <kito.cheng@gmail.com>
	    Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-multiple.md (load_multiple): Disallow
	volatile memory.
	(store_multiple): Ditto.

2018-02-26  Kito Cheng  <kito.cheng@gmail.com>

	* config.gcc: Add --with-cpu support for nds32 target.
	* config/nds32/nds32-opts.h (nds32_cpu_type): New.
	* config/nds32/nds32.opt: Add -mcpu= option.

2018-02-25  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.opt (mvrsave=no, mvrsave=yes, isel=no,
	isel=yes): Warn for these deprecated options.

2018-02-23  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/aix71.h (TARGET_DEFAULT): Change to
	ISA_2_5_MASKS_EMBEDDED.

2018-02-23  Jakub Jelinek  <jakub@redhat.com>

	* ipa-prop.c (ipa_vr_ggc_hash_traits::hash): Hash p->min and
	p->max as pointers rather than using iterative_hash_expr.

2018-02-23  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def: Change VSIGNED2 and VUNSIGNED2
	macro expansions from BU_VSX_2 to BU_P8V_VSX_2 and BU_VSX_OVERLOAD_2 to
	BU_P8V_OVERLOAD_2.
	* config/rs6000/rs6000-c.c: Change VSX_BUILTIN_VEC_VSIGNED2 to
	P8V_BUILTIN_VEC_VSIGNED2.  Change VSX_BUILTIN_VEC_VUNSIGNED2 to
	P8V_BUILTIN_VEC_VUNSIGNED2.

2018-02-22  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/81572
	* lra-int.h (LRA_UNKNOWN_ALT, LRA_NON_CLOBBERED_ALT): New macros.
	* lra.c (lra_set_insn_recog_data, lra_update_insn_recog_data): Use
	LRA_UNKNOWN_ALT.
	* lra-constraints.c (curr_insn_transform): Set up
	LRA_NON_CLOBBERED_ALT for moves processed on the fast path.  Use
	LRA_UNKNOWN_ALT.
	(remove_inheritance_pseudos): Use LRA_UNKNOWN_ALT.
	* lra-eliminations.c (spill_pseudos): Ditto.
	(process_insn_for_elimination): Ditto.
	* lra-lives.c (reg_early_clobber_p): Use the new macros.
	* lra-spills.c (spill_pseudos): Use LRA_UNKNOWN_ALT and
	LRA_NON_CLOBBERED_ALT.

2018-02-22  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84480
	* gimple-fold.c (gimple_fold_builtin_strcpy): Move warnings
	to maybe_diag_stxncpy_trunc.  Call it.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Integrate warnings
	from gimple_fold_builtin_strcpy.  Print inlining stack.
	(handle_builtin_stxncpy): Print inlining stack.
	* tree-ssa-strlen.h (maybe_diag_stxncpy_trunc): Declare.

2018-02-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84176
	* config/i386/i386.c (ix86_set_indirect_branch_type): Issue an
	error when -mindirect-branch=thunk-extern, -fcf-protection=branch
	and -fcheck-pointer-bounds are used together.
	(indirect_thunk_prefix): New enum.
	(indirect_thunk_need_prefix): New function.
	(indirect_thunk_name): Replace need_bnd_p with need_prefix.  Use
	"_nt" instead of "_bnd" for NOTRACK prefix.
	(output_indirect_thunk): Replace need_bnd_p with need_prefix.
	(output_indirect_thunk_function): Likewise.
	(): Likewise.
	(ix86_code_end): Update output_indirect_thunk_function calls.
	(ix86_output_indirect_branch_via_reg): Replace
	ix86_bnd_prefixed_insn_p with indirect_thunk_need_prefix.
	(ix86_output_indirect_branch_via_push): Likewise.
	(ix86_output_function_return): Likewise.
	* doc/invoke.texi: Document -mindirect-branch=thunk-extern is
	incompatible with -fcf-protection=branch and
	-fcheck-pointer-bounds.

2018-02-22  Steve Ellcey  <sellcey@cavium.com>

	PR target/83335
	* config/aarch64/aarch64.c (aarch64_print_address_internal):
	Change gcc_assert call to output_operand_lossage.

2018-02-22  Steve Ellcey  <sellcey@cavium.com>

	* doc/extend.texi (__builtin_extend_pointer): Document builtin.

2018-02-22  DJ Delorie  <dj@redhat.com>
	    Sebastian Perta  <sebastian.perta@renesas.com>
	    Oleg Endo  <olegendo@gcc.gnu.org>

	* config/rx/rx.c (rx_rtx_costs): New function.
	(TARGET_RTX_COSTS): Override to use rx_rtx_costs.

2018-02-22  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/arm/t-multilib: Map Armv8-R to Armv7 multilibs.

2018-02-22  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* common/config/arm/arm-common.c (arm_print_hint_for_cpu_option):
	Add "native" as a possible value.

2018-02-22  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* config/i386/i386.c (ix86_option_override_internal):
	Add "native" as a possible value for -march and -mtune.

2018-02-22  Jakub Jelinek  <jakub@redhat.com>

	PR target/84502
	* stor-layout.c (finalize_type_size): Propagate TYPE_EMPTY_P flag
	to all type variants.

	PR tree-optimization/84503
	* gimple-ssa-store-merging.c (merged_store_group::merge_into): Compute
	width as info->bitpos + info->bitsize - start.
	(merged_store_group::merge_overlapping): Simplify width computation.
	(check_no_overlap): New function.
	(imm_store_chain_info::try_coalesce_bswap): Compute expected
	start + width and last_order of the group, fail if check_no_overlap
	fails.
	(imm_store_chain_info::coalesce_immediate_stores): Don't merge info
	to group if check_no_overlap fails.

2018-02-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md: Delete contraint arguments to
	define_expand, define_split, and define_peephole2, and in
	define_insn_and_split if always unused.
	* config/rs6000/darwin.md: Ditto.
	* config/rs6000/dfp.md: Ditto.
	* config/rs6000/rs6000.md: Ditto.
	* config/rs6000/sync.md: Ditto.
	* config/rs6000/vector.md: Ditto.
	* config/rs6000/vsx.md: Ditto.

2018-02-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md: Write output control strings as braced
	blocks instead of double-quoted strings.
	* config/rs6000/darwin.md: Ditto.
	* config/rs6000/rs6000.md: Ditto.
	* config/rs6000/vector.md: Ditto.
	* config/rs6000/vsx.md: Ditto.

2018-02-21  Jason Merrill  <jason@redhat.com>

	PR c++/84314 - ICE with templates and fastcall attribute.
	* attribs.c (build_type_attribute_qual_variant): Remove assert.

2018-02-21  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-cp.c (determine_versionability): Fix comment typos.

2018-02-21  Jan Hubicka  <hubicka@ucw.cz>

	PR c/84229
	* ipa-cp.c (determine_versionability): Do not version functions caling
	va_arg_pack.

2018-02-21  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* config/aarch64/aarch64.c (aarch64_print_hint_for_core_or_arch):
	Add "native" as a possible value.
	* config/aarch64/aarch64.h (HAVE_LOCAL_CPU_DETECT):  Define
	the macro when native cpu detection is available.

2018-02-21  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* common/config/arm/arm-common.c (arm_print_hint_for_arch_option):
	Add "native" as a possible value.
	* config/arm/arm.h (HAVE_LOCAL_CPU_DETECT): Define the macro
	when native cpu detection is available.

2018-02-21  Jakub Jelinek  <jakub@redhat.com>
	    Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/84478
	* gimple-fold.h (get_range_strlen): Add a bool argument defaulted to
	false.
	* gimple-fold.c (get_range_strlen): Make minlen const and assume it
	can't be NULL.  Change FUZZY from bool to int, for 1 add PHI/COND_EXPR
	support which is conservatively correct, for 2 only stay conservative
	for maxlen.  Formatting and comment capitalization fixes.  Add STRICT
	argument to the 2 argument get_range_strlen, adjust 6 arg
	get_range_strlen caller and clear minmaxlen[0] and [1] if it returned
	false.
	(get_maxval_strlen): Adjust 6 arg get_range_strlen caller.
	(gimple_fold_builtin_strlen): Pass true as last argument to
	get_range_strlen.

2018-02-20  Martin Sebor  <msebor@redhat.com>

	PR middle-end/84095
	* gimple-ssa-warn-restrict.c (builtin_memref::extend_offset_range): New.
	(builtin_memref::set_base_and_offset): Same.  Handle inner references.
	(builtin_memref::builtin_memref): Factor out parts into
	set_base_and_offset and call it.

2018-02-20  Richard Sandiford  <richard.sandiford@linaro.org>

	PR middle-end/84406
	* optabs-query.c (find_widening_optab_handler_and_mode): If from_mode
	is a scalar_int_mode, assert that to_mode is a scalar_int_mode with
	greater precision.  If to_mode is a MODE_PARTIAL_INT, stop the
	search at the associated MODE_INT.

2018-02-20  Jeff Law  <law@redhat.com>

	PR middle-end/82123
	PR tree-optimization/81592
	PR middle-end/79257
	* gimple-ssa-sprintf.c (format_integer): Query EVRP range analyzer
	for range data rather than using global data.
	* gimple-ssa-sprintf.c (get_int_range): Query EVRP range analyzer for
	range data rather than using global data.
	* gimple-ssa-sprintf.c (get_int_range): Accept vr_values parameter
	pass it to children as needed.
	(struct directive::fmtresult): Similarly.
	(struct directive::set_width): Similarly.
	(struct directive::set_precision): Similarly.
	(format_integer, format_directive, parse_directive): Similarly.
	(format_none): Accept unnamed vr_values parameter.
	(format_percent, format_floating, format_character): Similarly.
	(format_string, format_plain): Similarly.
	* gimple-ssa-sprintf.c (sprintf_dom_walker::handle_gimple_call): Query
	the EVRP range analyzer for range data rather than using global data.
	* gimple-ssa-sprintf.c: Include alloc-pool.h, vr-values.h and
	gimple-ssa-evrp-analyze.h
	(class sprintf_dom_walker): Add after_dom_children member function.
	Add evrp_range_analyzer member.
	(sprintf_dom_walker::before_dom_children): Call into the EVRP
	range analyzer as needed.
	(sprintf_dom_walker::after_dom_children): New member function.
	* gimple-ssa-evrp-analyze.c (evrp_range_analyzer::enter): Do nothing
	if not optimizing.
	(evrp_range_analyzer::record_ranges_from_stmt): Likewise.
	(evrp_range_analyzer::pop_to_marker): Likewise.

2018-02-20  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84419
	* internal-fn.c (expand_call_mem_ref): Create a TARGET_MEM_REF
	with the required type if its current type is compatible but
	different.

2018-02-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/82004
	* match.pd (pow(C,x) -> exp(log(C)*x)): Delay all folding until
	after vectorization.

2018-02-20  Martin Liska  <mliska@suse.cz>

	PR driver/83193
	* config/aarch64/aarch64.c (aarch64_print_hint_for_core_or_arch): Print
	possible values if we don't have a hint.

2018-02-20  Martin Liska  <mliska@suse.cz>

	PR c/84310
	PR target/79747
	* final.c (shorten_branches): Build align_tab array with one
	more element.
	* opts.c (finish_options): Add alignment option limit check.
	(MAX_CODE_ALIGN): Likewise.
	(MAX_CODE_ALIGN_VALUE): Likewise.
	* doc/invoke.texi: Document maximum allowed option value for
	all -falign-* options.

2018-02-19  Jakub Jelinek  <jakub@redhat.com>

	PR target/84146
	* reg-notes.def (REG_CALL_ARG_LOCATION): New reg note.
	* insn-notes.def (NOTE_INSN_CALL_ARG_LOCATION): Remove.
	* var-tracking.c (emit_note_insn_var_location): Remove all references
	to NOTE_INSN_CALL_ARG_LOCATION.
	(emit_notes_in_bb): Emit arguments as REG_CALL_ARG_LOCATION note on
	the CALL_INSN rather than separate NOTE_INSN_CALL_ARG_LOCATION note.
	Use copy_rtx_if_shared.
	* dwarf2out.c (gen_subprogram_die): Use XEXP with 0 instead of
	NOTE_VAR_LOCATION on ca_loc->call_arg_loc_note.
	(dwarf2out_var_location): Remove handling of
	NOTE_INSN_CALL_ARG_LOCATION, instead handle REG_CALL_ARG_LOCATION note
	on call_insn.
	* final.c (final_scan_insn): Remove all references to
	NOTE_INSN_CALL_ARG_LOCATION.
	(rest_of_clean_state): Likewise.  Remove REG_CALL_ARG_LOCATION notes
	before dumping final insns.
	* except.c (emit_note_eh_region_end): Remove all references to
	NOTE_INSN_CALL_ARG_LOCATION.
	* config/alpha/alpha.c (alpha_pad_function_end): Likewise.
	* config/c6x/c6x.c (c6x_gen_bundles): Likewise.
	* config/arc/arc.c (hwloop_optimize): Likewise.
	* config/arm/arm.c (create_fix_barrier): Likewise.
	* config/s390/s390.c (s390_chunkify_start): Likewise.
	* config/sh/sh.c (find_barrier): Likewise.
	* config/i386/i386.c (rest_of_insert_endbranch,
	ix86_seh_fixup_eh_fallthru): Likewise.
	* config/xtensa/xtensa.c (hwloop_optimize): Likewise.
	* config/iq2000/iq2000.c (final_prescan_insn): Likewise.
	* config/frv/frv.c (frv_function_prologue): Likewise.
	* emit-rtl.c (try_split): Likewise.  Copy over REG_CALL_ARG_LOCATION
	reg note.
	(note_outside_basic_block_p): Remove all references to
	NOTE_INSN_CALL_ARG_LOCATION.
	* gengtype.c (adjust_field_rtx_def): Likewise.
	* print-rtl.c (rtx_writer::print_rtx_operand_code_0, print_insn):
	Likewise.
	* jump.c (cleanup_barriers, delete_related_insns): Likewise.
	* cfgrtl.c (force_nonfallthru_and_redirect): Likewise.

	PR c++/84444
	* builtins.c (builtin_mathfn_code): Don't check if CALL_EXPR_FN (t)
	is ADDR_EXPR.

	PR tree-optimization/84452
	* tree-vect-patterns.c (vect_recog_pow_pattern): Don't call
	expand_simd_clones if targetm.simd_clone.compute_vecsize_and_simdlen
	is NULL.

2018-02-19  Martin Liska  <mliska@suse.cz>

	PR sanitizer/82183
	* passes.def: Put pass_sancov_O0 before pass_lower_switch with -O0.

2018-02-19  Martin Liska  <mliska@suse.cz>
	    Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/82491
	* gimple-fold.c (get_base_constructor): Make earlier bail out
	to prevent ubsan.

2018-02-19  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def: Change NEG macro expansions from
	BU_ALTIVEC_A to BU_P8V_AV_1 and BU_ALTIVEC_OVERLOAD_1 to
	BU_P8V_OVERLOAD_1.
	* config/rs6000/rs6000-c.c: Change ALTIVEC_BUILTIN_VEC_NEG to
	P8V_BUILTIN_VEC_NEG.

2018-02-19  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (movdf): New define expand.

2018-02-19  Martin Liska  <mliska@suse.cz>

	PR other/80589
	* doc/invoke.texi: Fix typo.
	* params.def (PARAM_MAX_LOOP_HEADER_INSNS): Likewise.

2018-02-18  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): Don't
	handle rs6000_single_float and rs6000_double_float specially for
	e500 family CPUs.

2018-02-16  Jeff Law  <law@redhat.com>

	* config/rx/rx.c (add_pop_cfi_notes): New function.;
	(pop_regs): Use it.

2018-02-16  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/84425
	* ipa-inline.c (inline_small_functions): Fix a typo.

2018-02-16  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Backwards Compatibility): Americanize 'behaviour'.

2018-02-16  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def: Add BU_P8V_VSX_2 macro definition.
	Change FLOAT2 expansions from BU_VSX_2 to BU_P8V_VSX_2 and
	from BU_VSX_OVERLOAD_2 to BU_P8V_OVERLOAD_2.
	* config/rs6000/rs6000-c.c: Changed macro VSX_BUILTIN_VEC_FLOAT2
	expansion to P8V_BUILTIN_VEC_FLOAT2.

2018-02-16  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/70023
	* lra-constraints.c (inherit_in_ebb): Take hard reg mode of
	src_regno into account.

2018-02-16  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h: Remove vec_vextract4b and vec_vinsert4b.
	* config/rs6000/rs6000-builtin.def: Remove macro expansion for
	VEXTRACT4B, VINSERT4B, VINSERT4B_DI and VEXTRACT4B.
	* config/rs6000/rs6000.c: Remove case statements for
	P9V_BUILTIN_VEXTRACT4B, P9V_BUILTIN_VEC_VEXTRACT4B,
	P9V_BUILTIN_VINSERT4B, P9V_BUILTIN_VINSERT4B_DI,
	and P9V_BUILTIN_VEC_VINSERT4B.
	* config/rs6000/rs6000-c.c (altivec_expand_builtin): Remove entries for
	P9V_BUILTIN_VEC_VEXTRACT4B and P9V_BUILTIN_VEC_VINSERT4B.
	* config/rs6000/vsx.md:
	* doc/extend.texi: Remove vec_vextract4b, non ABI definitions for
	vec_insert4b.

2018-02-16  Carl Love  <cel@us.ibm.com>

	* config/rs6000/altivec.h: Add builtin names vec_extract4b
	vec_insert4b.
	* config/rs6000/rs6000-builtin.def: Add INSERT4B and EXTRACT4B
	definitions.
	* config/rs6000/rs6000-c.c: Add the definitions for
	P9V_BUILTIN_VEC_EXTRACT4B and P9V_BUILTIN_VEC_INSERT4B.
	* config/rs6000/rs6000.c (altivec_expand_builtin): Add
	P9V_BUILTIN_EXTRACT4B and P9V_BUILTIN_INSERT4B case statements.
	* config/rs6000/vsx.md: Add define_insn extract4b.  Add define_expand
	definition for insert4b and define insn *insert3b_internal.
	* doc/extend.texi: Add documentation for vec_extract4b.

2018-02-16  Nathan Sidwell  <nathan@acm.org>

	* doc/extend.texi (Backwards Compatibility): Mention friend
	injection.  Note for-scope is deprecated.
	* doc/invoke.texi (-ffriend-injection): Deprecate.

2018-02-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* combine.c (try_combine): When adjusting LOG_LINKS for the destination
	that moved to I2, also allow destinations that are a paradoxical
	subreg (instead of a normal reg).

2018-02-16  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/83831
	* config/rx/rx.c (rx_fuse_in_memory_bitop): Convert shift operand
	to QImode.

2018-02-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84037
	PR tree-optimization/84016
	PR target/82862
	* config/i386/i386.c (ix86_builtin_vectorization_cost):
	Adjust vec_construct for the fact we need additional higher latency
	128bit inserts for AVX256 and AVX512 vector builds.
	(ix86_add_stmt_cost): Scale vector construction cost for
	elementwise loads.

2018-02-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84417
	* tree-ssa.c (non_rewritable_mem_ref_base): Properly constrain
	the MEM_REF offset when conversion to BIT_FIELD_REF is desired.
	(non_rewritable_lvalue_p): Likewise, use poly-ints.

2018-02-16  Martin Liska  <mliska@suse.cz>

	PR sanitizer/84307
	* internal-fn.def (ASAN_CHECK): Set proper flags.
	(ASAN_MARK): Likewise.

2018-02-16  Julia Koval  <julia.koval@intel.com>

	* config/i386/i386.c (ix86_option_override_internal): Remove PTA_CLWB
	from PTA_CANNONLAKE.

2018-02-16  Jakub Jelinek  <jakub@redhat.com>

	PR target/84272
	* config/aarch64/cortex-a57-fma-steering.c (fma_forest::merge_forest):
	Use ++iter rather than iter++ for std::list iterators.
	(func_fma_steering::dfs): Likewise.  Don't delete nodes right away,
	defer deleting them until all nodes in the forest are processed.  Do
	free even leaf nodes.  Change to_process into auto_vec.

	PR bootstrap/84405
	* system.h (BROKEN_VALUE_INITIALIZATION): Define for GCC < 4.3.
	* vec.h (vec_default_construct): Use memset instead of placement new
	if BROKEN_VALUE_INITIALIZATION is defined.
	* hash-table.h (hash_table<Descriptor, Allocator>::empty_slow): Use
	memset instead of value initialization if BROKEN_VALUE_INITIALIZATION
	is defined.

	PR rtl-optimization/83723
	* lra-int.h (lra_substitute_pseudo): Add DEBUG_P argument.
	* lra.c (lra_substitute_pseudo): Likewise.  If true, use
	gen_rtx_raw_SUBREG instead of gen_rtx_SUBREG.  Pass DEBUG_P to
	recursive calls.
	(lra_substitute_pseudo_within_insn): Adjust lra_substitute_pseudo
	callers.
	* lra-constraints.c (inherit_reload_reg, split_reg): Likewise.

2018-02-16  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/81443
	* rtlanal.c (num_sign_bit_copies1) <SUBREG>: Do not propagate results
	from inner REGs to paradoxical SUBREGs.

2018-02-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84399
	* graphite-scop-detection.c (scop_detection::stmt_simple_for_scop_p):
	For operands we can analyze at their definition make sure we can
	analyze them at each use as well.

2018-02-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84190
	* tree-ssa.c (non_rewritable_mem_ref_base): Do not touch
	volatile accesses if the decl isn't volatile.

2018-02-15  Jason Merrill  <jason@redhat.com>

	PR c++/84314 - ICE with templates and fastcall attribute.
	* attribs.c (build_type_attribute_qual_variant): Don't clobber
	TYPE_CANONICAL on an existing type.

2018-02-15  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84383
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Don't look at
	dstoff nor call operand_equal_p if dstbase is NULL.

	PR tree-optimization/84334
	* match.pd ((A +- CST1) +- CST2 -> A + CST3): If A is
	also a CONSTANT_CLASS_P, punt.

2018-02-14  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_first_stack_step): Move locals after
	first SMALL_OPERAND check.  New local min_second_step.  Move assert
	to where locals are set.  Add TARGET_RVC support.
	* config/riscv/riscv.h (C_SxSP_BITS, SWSP_REACH, SDSP_REACH): New.

2018-02-14  Indu Bhagat  <indu.bhagat@oracle.com>

	* doc/invoke.texi: Correct -Wformat-overflow code sample.

2018-02-14  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83698
	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): For
	arrays constrain the offset range to their bounds.
	(builtin_access::strcat_overlap): Adjust the bounds of overlap offset.
	(builtin_access::overlap): Avoid setting the size of overlap if it's
	already been set.
	(maybe_diag_overlap): Also consider arrays when deciding what values
	of offsets to include in diagnostics.

2018-02-14  Martin Sebor  <msebor@redhat.com>

	PR c/84108
	* attribs.c (diag_attr_exclusions): Consider the exclusion(s)
	that correspond to the kind of a declaration.

2018-02-14  John David Anglin  <danglin@gcc.gnu.org>

	PR target/83984
	* config/pa/pa.md: Load address of PIC label using the linkage table
	if the label is nonlocal.

2018-02-14  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): Issue
	warning message if user requests -maltivec=be.
	* doc/invoke.texi: Document deprecation of -maltivec=be.

2018-02-14  Will Schmidt  <will_schmidt@vnet.ibm.com>

	PR target/84220
	* config/rs6000/rs6000-c.c: Update definitions for
	ALTIVEC_BUILTIN_VEC_SLD, ALTIVEC_BUILTIN_VEC_SLDW,
	VEC_XXSLDWI and ALTIVEC_BUILTIN_VEC_XXPERMDI builtins.

2018-02-14  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	PR target/84239
	* config/i386/cetintrin.h: Remove _rdssp[d|q] and
	add _get_ssp intrinsics. Remove argument from
	__builtin_ia32_rdssp[d|q].
	* config/i386/i386-builtin-types.def: Add UINT_FTYPE_VOID.
	* config/i386/i386-builtin.def: Remove argument from
	__builtin_ia32_rdssp[d|q].
	* config/i386/i386.c: Use UINT_FTYPE_VOID. Use
	ix86_expand_special_args_builtin for _rdssp[d|q].
	* config/i386/i386.md: Remove argument from rdssp[si|di] insn.
	Clear register before usage.
	* doc/extend.texi: Remove argument from __builtin_ia32_rdssp[d|q].
	Add documentation for new _get_ssp and _inc_ssp intrinsics.

2018-02-14  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84357
	* tree-data-ref.c (object_address_invariant_in_loop_p): Check
	operand 1 of an ARRAY_REF too.

2018-02-14  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/83831
	* config/rx/rx-protos.h (rx_reg_dead_or_unused_after_insn,
	rx_copy_reg_dead_or_unused_notes, rx_fuse_in_memory_bitop): New
	declarations.
	(set_of_reg): New struct.
	(rx_find_set_of_reg, rx_find_use_of_reg): New functions.
	* config/rx/rx.c (rx_reg_dead_or_unused_after_insn,
	rx_copy_reg_dead_or_unused_notes, rx_fuse_in_memory_bitop): New
	functions.
	* config/rx/rx.md (andsi3, iorsi3, xorsi3): Convert to insn_and_split.
	Split into bitclr, bitset, bitinvert patterns if appropriate.
	(*bitset, *bitinvert, *bitclr): Convert to named insn_and_split and
	use rx_fuse_in_memory_bitop.
	(*bitset_in_memory, *bitinvert_in_memory, *bitclr_in_memory): Convert
	to named insn, correct maximum insn length.

2018-02-14  Jozef Lawrynowicz  <jozefl.gcc@gmail.com>

	PR target/79242
	* machmode.def: Define a complex mode for PARTIAL_INT.
	* genmodes.c (complex_class): Return MODE_COMPLEX_INT for
	MODE_PARTIAL_INT.
	* doc/rtl.texi: Document CSPImode.
	* config/msp430/msp430.c (msp430_hard_regno_nregs): Add CPSImode
	handling.
	(msp430_hard_regno_nregs_with_padding): Likewise.

2018-02-13  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/84279
	* config/rs6000/rs6000.c (mem_operand_gpr): Disallow altivec addresses.

2018-02-13  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/84169
	* combine.c (try_combine): New variable split_i2i3.  Set it to true if
	we generated a parallel as new i3 and we split that to new i2 and i3
	instructions.  Handle split_i2i3 similar to swap_i2i3: scan the
	LOG_LINKs of i3 to see which of those need to link to i2 now.  Link
	those to i2, not i1.  Partially rewrite this scan code.

2018-02-13  Jakub Jelinek  <jakub@redhat.com>

	PR c/82210
	* stor-layout.c (place_field): For variable length fields, adjust
	offset_align afterwards not just based on the field's alignment,
	but also on the size.

	PR middle-end/84309
	* match.pd (pow(C,x) -> exp(log(C)*x)): Use exp2s and log2s instead
	of exps and logs in the use_exp2 case.

2018-02-13  Jeff Law  <law@redhat.com>

	* config/rl/rl78.c (rl78_attribute_table): Fix terminator and
	entry for "vector".

	* config/rl78/rl78.c (rl78_handle_func_attribute): Mark
	ARGS as unused.

2018-02-13  Alexandre Oliva  <aoliva@redhat.com>

	PR debug/84342
	PR debug/84319
	* common.opt (gas-loc-support, gas-locview-support): New.
	(ginline-points, ginternal-reset-location-views): New.
	* doc/invoke.texi: Document them.  Use @itemx where intended.
	(gvariable-location-views): Adjust.
	* target.def (reset_location_view): New.
	* doc/tm.texi.in (DWARF2_ASM_VIEW_DEBUG_INFO): New.
	(TARGET_RESET_LOCATION_VIEW): New.
	* doc/tm.texi: Rebuilt.
	* dwarf2out.c (dwarf2out_default_as_loc_support): New.
	(dwarf2out_default_as_locview_support): New.
	(output_asm_line_debug_info): Use option variables.
	(dwarf2out_maybe_output_loclist_view_pair): Likewise.
	(output_loc_list): Likewise.
	(add_high_low_attributes): Check option variables.
	Don't output entry view attribute in strict mode.
	(gen_inlined_subroutine_die): Check option variables.
	(dwarf2out_inline_entry): Likewise.
	(init_sections_and_labels): Likewise.
	(dwarf2out_early_finish): Likewise.
	(maybe_reset_location_view): New, from...
	(dwarf2out_var_location): ... here.  Call it.
	* debug.h (dwarf2out_default_as_loc_support): Declare.
	(dwarf2out_default_as_locview_support): Declare.
	* hooks.c (hook_int_rtx_insn_0): New.
	* hooks.h (hook_int_rtx_insn_0): Declare.
	* toplev.c (process_options): Take -gas-loc-support and
	-gas-locview-support from dwarf2out.  Enable
	-gvariable-location-views by default only with locview
	assembler support.  Enable -ginternal-reset-location-views by
	default only if the target defines the corresponding hook.
	Enable -ginline-points by default if location views are
	enabled; force it disabled if statement frontiers are
	disabled.
	* tree-inline.c (expand_call_inline): Check option variables.
	* tree-ssa-live.c (remove_unused_scope_block_p): Likewise.

2018-02-13  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84321
	* tree-vrp.c (intersect_range_with_nonzero_bits): Fix VR_ANTI_RANGE
	handling.  Also check whether the anti-range contains any values
	that satisfy the mask; switch to a VR_RANGE if not.

2018-02-13  Paolo Bonzini  <bonzini@gnu.org>

	PR sanitizer/84340
	* internal-fn.def (ASAN_CHECK, ASAN_MARK): Revert changes to fnspec.

2018-02-13  Martin Jambor  <mjambor@suse.cz>

	PR c++/83990
	* ipa-param-manipulation.c (ipa_modify_call_arguments): Use location
	of call statements, also set location of a load to a temporary.

2018-02-13  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.c (add_vector_labels): New function.
	* config/rl78/rl78.c (rl78_handle_vector_attribute): New function.
	* config/rl78/rl78.c (rl78_start_function): Call add_vector_labels.
	* config/rl78/rl78.c (rl78_handle_func_attribute): Removed the assert
	which checks that no arguments are passed.
	* config/rl78/rl78.c (rl78_attribute_table): Add "vector" attribute.
	* doc/extend.texi: Documentation for the new attribute.

2018-02-13  Andreas Schwab  <schwab@suse.de>

	* config/riscv/linux.h (CPP_SPEC): Define.

2018-02-13  Jakub Jelinek  <jakub@redhat.com>

	PR target/84335
	* config/i386/i386.c (ix86_init_mmx_sse_builtins): Pass
	OPTION_MASK_ISA_AES | OPTION_MASK_ISA_SSE2 instead of
	OPTION_MASK_ISA_AES as first argument to def_builtin_const
	for AES builtins.  Pass OPTION_MASK_ISA_PCLMUL | OPTION_MASK_ISA_SSE2
	instead of OPTION_MASK_ISA_PCLMUL as first argument to
	def_builtin_const for __builtin_ia32_pclmulqdq128 builtin.
	* config/i386/wmmintrin.h: If __SSE2__ is not defined, enable it
	temporarily for AES and PCLMUL builtins.

	PR tree-optimization/84339
	* gimple-fold.c (get_range_strlen): Set *FLEXP to true when handling
	ARRAY_REF where first operand is array_at_struct_end_p COMPONENT_REF.
	Formatting fixes.

	PR middle-end/84309
	* match.pd (pow(C,x) -> exp(log(C)*x)): Optimize instead into
	exp2(log2(C)*x) if C is a power of 2 and c99 runtime is available.
	* generic-match-head.c (canonicalize_math_after_vectorization_p): New
	inline function.
	* gimple-match-head.c (canonicalize_math_after_vectorization_p): New
	inline function.
	* omp-simd-clone.h: New file.
	* omp-simd-clone.c: Include omp-simd-clone.h.
	(expand_simd_clones): No longer static.
	* tree-vect-patterns.c: Include fold-const-call.h, attribs.h,
	cgraph.h and omp-simd-clone.h.
	(vect_recog_pow_pattern): Optimize pow(C,x) to exp(log(C)*x).
	(vect_recog_widen_shift_pattern): Formatting fix.
	(vect_pattern_recog_1): Don't check optab for calls.

	PR target/84336
	* config/i386/sse.md (<avx512>_vpermi2var<mode>3_mask): Force
	operands[2] into a REG before using gen_lowpart on it.

2018-02-12  Jeff Law  <law@redhat.com>

	PR target/83760
	* config/sh/sh.c (find_barrier): Consider a sibling call
	a barrier as well.

	* cse.c (try_back_substitute_reg): Move any REG_ARGS_SIZE note when
	successfully back substituting a reg.

2018-02-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84037
	* tree-vect-slp.c (vect_analyze_slp_cost): Add visited
	parameter, move visited init to caller.
	(vect_slp_analyze_operations): Separate cost from validity
	check, initialize visited once for all instances.
	(vect_schedule_slp): Analyze map to CSE vectorized nodes once
	for all instances.
	* tree-vect-stmts.c (vect_model_simple_cost): Make early
	out an assert.
	(vect_model_promotion_demotion_cost): Likewise.
	(vectorizable_bswap): Guard cost modeling with !slp_node
	instead of !PURE_SLP_STMT to avoid double-counting on hybrid
	SLP stmts.
	(vectorizable_call): Likewise.
	(vectorizable_conversion): Likewise.
	(vectorizable_assignment): Likewise.
	(vectorizable_shift): Likewise.
	(vectorizable_operation): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	(vectorizable_condition): Likewise.
	(vectorizable_comparison): Likewise.

2018-02-12  Paolo Bonzini  <bonzini@gnu.org>

	PR sanitizer/84307
	* internal-fn.def (ASAN_CHECK): Fix fnspec to account for return value.
	(ASAN_MARK): Fix fnspec to account for return value, change pointer
	argument from 'R' to 'W' so that the pointed-to datum is clobbered.

2018-02-08  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83665
	* params.def (inline-min-speedup): Increase from 8 to 15.
	(max-inline-insns-auto): Decrease from 40 to 30.
	* ipa-split.c (consider_split): Add some buffer for function to
	be considered inlining candidate.
	* invoke.texi (max-inline-insns-auto, inline-min-speedup): UPdate
	default values.

2018-02-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84037
	* tree-vect-slp.c (vect_build_slp_tree_2): Try swapping the
	matched stmts if we cannot swap the non-matched ones.

2018-02-12  Olga Makhotina  <olga.makhotina@intel.com>

	* config/i386/avx512fintrin.h (_mm_mask_scalef_round_sd,
	_mm_maskz_scalef_round_sd, _mm_mask_scalef_round_ss,
	_mm_maskz_scalef_round_ss): New intrinsics.
	(__builtin_ia32_scalefsd_round, __builtin_ia32_scalefss_round): Fix.
	* config/i386/i386-builtin.def (__builtin_ia32_scalefsd_round,
	__builtin_ia32_scalefss_round): Remove.
	(__builtin_ia32_scalefsd_mask_round,
	__builtin_ia32_scalefss_mask_round): New intrinsics.
	* config/i386/sse.md (vmscalef<mode><round_name>): Renamed to ...
	(vmscalef<mode><mask_scalar_name><round_scalar_name>): ... this.
	((match_operand:VF_128 2 "<round_nimm_predicate>"
	"<round_constraint>")): Changed to ...
	((match_operand:VF_128 2 "<round_scalar_nimm_predicate>"
	"<round_scalar_constraint>")): ... this.
	("vscalef<ssescalarmodesuffix>\t{<round_op3>%2, %1, %0|
	%0, %1, %2<round_op3>}"): Changed to ...
	("vscalef<ssescalarmodesuffix>\t{<round_scalar_mask_op3>%2, %1,
	%0<mask_scalar_operand3>|%0<mask_scalar_operand3>, %1,
	%2<round_scalar_mask_op3>}"): ... this.
	* config/i386/subst.md (round_scalar_nimm_predicate): New.

2018-02-12  Olga Makhotina  <olga.makhotina@intel.com>

	* config/i386/avx512fintrin.h (_mm_mask_sqrt_round_sd)
	(_mm_maskz_sqrt_round_sd, _mm_mask_sqrt_round_ss)
	(_mm_maskz_sqrt_round_ss): New intrinsics.
	(__builtin_ia32_sqrtsd_round, __builtin_ia32_sqrtss_round): Remove.
	(__builtin_ia32_sqrtsd_mask_round)
	(__builtin_ia32_sqrtss_mask_round): New builtins.
	* config/i386/i386-builtin.def (__builtin_ia32_sqrtsd_round)
	(__builtin_ia32_sqrtss_round): Remove.
	(__builtin_ia32_sqrtsd_mask_round)
	(__builtin_ia32_sqrtss_mask_round): New builtins.
	* config/i386/sse.md (vmsqrt<mode>2<round_name>): Renamed to ...
	(vmsqrt<mode>2<mask_scalar_name><round_scalar_name>): ... this.
	((match_operand:VF_128 1 "vector_operand"
	"xBm,<round_constraint>")): Changed to ...
	((match_operand:VF_128 1 "vector_operand"
	"xBm,<round_scalar_constraint>")): ... this.
	(vsqrt<ssescalarmodesuffix>\t{<round_op3>%1, %2, %0|
	%0, %2, %<iptr>1<round_op3>}): Changed to ...
	(vsqrt<ssescalarmodesuffix>\t{<round_scalar_mask_op3>%1, %2,
	%0<mask_scalar_operand3>|%0<mask_scalar_operand3>, %2,
	%<iptr>1<round_scalar_mask_op3>}): ... this.
	((set_attr "prefix" "<round_prefix>")): Changed to ...
	((set_attr "prefix" "<round_scalar_prefix>")): ... this.

2018-02-11  Steven Munroe  <munroesj@gcc.gnu.org>

	PR target/84266
	* config/rs6000/mmintrin.h (_mm_cmpeq_pi32 [_ARCH_PWR9]):
	Cast vec_cmpeq result to correct type.
	* config/rs6000/mmintrin.h (_mm_cmpgt_pi32 [_ARCH_PWR9]):
	Cast vec_cmpgt result to correct type.

2018-02-11  Alexandre Oliva  <aoliva@redhat.com>

	* final.c (final_scan_insn_1): Renamed from...
	(final_scan_insn): ... this.  New wrapper, to recover
	seen from the outermost call in recursive ones.
	* config/sparc/sparc.c (output_return): Drop seen from call.
	(output_sibcall): Likewise.
	* config/visium/visium.c (output_branch): Likewise.

2018-02-10  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (hppa_profile_hook): Mark SYMBOL_REF for _mcount as
	function label.

2018-02-10  Alan Modra  <amodra@gmail.com>

	PR target/84300
	* config/rs6000/rs6000.md (split_stack_return): Remove (use ..).
	Specify LR as an input.

2018-02-10  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/83987
	* omp-low.c (maybe_remove_omp_member_access_dummy_vars,
	remove_member_access_dummy_vars): New functions.
	(lower_omp_for, lower_omp_taskreg, lower_omp_target,
	lower_omp_1, execute_lower_omp): Use them.

	PR rtl-optimization/84308
	* shrink-wrap.c (spread_components): Release todo vector.

2018-02-09  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/57193
	* ira-color.c (struct allocno_color_data): Add member
	conflict_allocno_hard_prefs.
	(update_conflict_allocno_hard_prefs): New.
	(bucket_allocno_compare_func): Add a preference based on
	conflict_allocno_hard_prefs.
	(push_allocno_to_stack): Update conflict_allocno_hard_prefs.
	(color_allocnos): Remove a dead code.  Initiate
	conflict_allocno_hard_prefs.  Call update_costs_from_prefs.

2018-02-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/84226
	* config/rs6000/vsx.md (p9_xxbrq_v16qi): Change input operand
	constraint from =wa to wa.  Avoid a subreg on the output operand,
	instead use a pseudo and subreg it in a move.
	(p9_xxbrd_<mode>): Changed to ...
	(p9_xxbrd_v2di): ... this insn, without VSX_D iterator.
	(p9_xxbrd_v2df): New expander.
	(p9_xxbrw_<mode>): Changed to ...
	(p9_xxbrw_v4si): ... this insn, without VSX_W iterator.
	(p9_xxbrw_v4sf): New expander.

2018-02-09  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rx/rx.md (movsicc): Update expander to be matched by GCC.

2018-02-09  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83926
	* config/rs6000/vsx.md (vsx_mul_v2di): Handle generating a 64-bit
	multiply in 32-bit mode.
	(vsx_div_v2di): Handle generating a 64-bit signed divide in 32-bit mode.
	(vsx_udiv_v2di): Handle generating a 64-bit unsigned divide in 32-bit
	mode.

2018-02-09  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rx/constraints.md (CALL_OP_SYMBOL_REF): Added new constraint
	to allow or block "symbol_ref" depending on the value of TARGET_JSR.
	* config/rx/rx.md (call_internal): Use CALL_OP_SYMBOL_REF.
	* config/rx/rx.md (call_value_internal): Use CALL_OP_SYMBOL_REF.

2018-02-09  Pierre-Marie de Rodat  <derodat@adacore.com>

	PR lto/84213
	* dwarf2out.c (is_trivial_indirect_ref): New function.
	(dwarf2out_late_global_decl): Do not generate a location
	attribute for variables that have a non-trivial DECL_VALUE_EXPR
	and that are not defined in the current unit.

2018-02-09  Eric Botcazou  <ebotcazou@adacore.com>

	* optabs.c (prepare_cmp_insn): Try harder to emit a direct comparison
	instead of a libcall for UNORDERED.

2018-02-09  Tamar Christina  <tamar.christina@arm.com>

	PR target/82641
	* config/arm/arm-c.c (arm_cpu_builtins): Un-define __ARM_FEATURE_LDREX,
	__ARM_ARCH_PROFILE, __ARM_ARCH_ISA_THUMB, __ARM_FP and __ARM_NEON_FP.

2018-02-09  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	PR target/PR84295
	* config/s390/s390.c (s390_set_current_function): Invoke
	s390_indirect_branch_settings also if fndecl didn't change.

2018-02-09  Alexandre Oliva  <aoliva@redhat.com>

	* config/rs6000/rs6000.md (blockage): Set length to zero.

2018-02-09  Eric Botcazou  <ebotcazou@adacore.com>

	* expr.c (optimize_bitfield_assignment_op): Remove obsolete assertion.

2018-02-09  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/84285
	* gcc.c (STATIC_LIBASAN_LIBS, STATIC_LIBTSAN_LIBS,
	STATIC_LIBLSAN_LIBS, STATIC_LIBUBSAN_LIBS): Handle -static like
	-static-lib*san.

	PR debug/84252
	* var-tracking.c (vt_add_function_parameter): Punt for non-onepart
	PARALLEL incoming that failed vt_get_decl_and_offset check.

	PR middle-end/84237
	* output.h (bss_initializer_p): Add NAMED argument, defaulted to false.
	* varasm.c (bss_initializer_p): Add NAMED argument, if true, ignore
	TREE_READONLY bit.
	(get_variable_section): For decls in named .bss* sections pass true as
	second argument to bss_initializer_p.

2018-02-09  Marek Polacek  <polacek@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR c++/83659
	* fold-const.c (fold_indirect_ref_1): Use VECTOR_TYPE_P macro.
	Formatting fixes.  Verify first that tree_fits_poly_int64_p (op01).
	Sync some changes from cxx_fold_indirect_ref.

2018-02-09  Alexandre Oliva  <aoliva@redhat.com>

	* cfgexpand.c (expand_gimple_basic_block): Handle inline entry
	markers.
	* dwarf2out.c (dwarf2_debug_hooks): Enable inline_entry hook.
	(BLOCK_INLINE_ENTRY_LABEL): New.
	(dwarf2out_var_location): Disregard inline entry markers.
	(inline_entry_data): New struct.
	(inline_entry_data_hasher): New hashtable type.
	(inline_entry_data_hasher::hash): New.
	(inline_entry_data_hasher::equal): New.
	(inline_entry_data_table): New variable.
	(add_high_low_attributes): Add DW_AT_entry_pc and
	DW_AT_GNU_entry_view attributes if a pending entry is found
	in inline_entry_data_table.  Add old entry_pc attribute only
	if debug nonbinding markers are disabled.
	(gen_inlined_subroutine_die): Set BLOCK_DIE if nonbinding
	markers are enabled.
	(block_within_block_p, dwarf2out_inline_entry): New.
	(dwarf2out_finish): Check that no entries remained in
	inline_entry_data_table.
	* final.c (reemit_insn_block_notes): Handle inline entry notes.
	(final_scan_insn, notice_source_line): Likewise.
	(rest_of_clean_state): Skip inline entry markers.
	* gimple-pretty-print.c (dump_gimple_debug): Handle inline entry
	markers.
	* gimple.c (gimple_build_debug_inline_entry): New.
	* gimple.h (enum gimple_debug_subcode): Add
	GIMPLE_DEBUG_INLINE_ENTRY.
	(gimple_build_debug_inline_entry): Declare.
	(gimple_debug_inline_entry_p): New.
	(gimple_debug_nonbind_marker_p): Adjust.
	* insn-notes.def (INLINE_ENTRY): New.
	* print-rtl.c (rtx_writer::print_rtx_operand_code_0): Handle
	inline entry marker notes.
	(print_insn): Likewise.
	* rtl.h	(NOTE_MARKER_P): Add INLINE_ENTRY support.
	(INSN_DEBUG_MARKER_KIND): Likewise.
	(GEN_RTX_DEBUG_MARKER_INLINE_ENTRY_PAT): New.
	* tree-inline.c	(expand_call_inline): Build and insert
	debug_inline_entry stmt.
	* tree-ssa-live.c (remove_unused_scope_block_p): Preserve
	inline entry blocks early, if nonbind markers are enabled.
	(dump_scope_block): Dump fragment info.
	* var-tracking.c (reemit_marker_as_note): Handle inline entry note.
	* doc/gimple.texi (gimple_debug_inline_entry_p): New.
	(gimple_build_debug_inline_entry): New.
	* doc/invoke.texi (gstatement-frontiers, gno-statement-frontiers):
	Enable/disable inline entry points too.
	* doc/rtl.texi (NOTE_INSN_INLINE_ENTRY): New.
	(DEBUG_INSN): Describe inline entry markers.

	* common.opt (gvariable-location-views): New.
	(gvariable-location-views=incompat5): New.
	* config.in: Rebuilt.
	* configure: Rebuilt.
	* configure.ac: Test assembler for view support.
	* dwarf2asm.c (dw2_asm_output_symname_uleb128): New.
	* dwarf2asm.h (dw2_asm_output_symname_uleb128): Declare.
	* dwarf2out.c (var_loc_view): New typedef.
	(struct dw_loc_list_struct): Add vl_symbol, vbegin, vend.
	(dwarf2out_locviews_in_attribute): New.
	(dwarf2out_locviews_in_loclist): New.
	(dw_val_equal_p): Compare val_view_list of dw_val_class_view_lists.
	(enum dw_line_info_opcode): Add LI_adv_address.
	(struct dw_line_info_table): Add view.
	(RESET_NEXT_VIEW, RESETTING_VIEW_P): New macros.
	(DWARF2_ASM_VIEW_DEBUG_INFO): Define default.
	(zero_view_p): New variable.
	(ZERO_VIEW_P): New macro.
	(output_asm_line_debug_info): New.
	(struct var_loc_node): Add view.
	(add_AT_view_list, AT_loc_list): New.
	(add_var_loc_to_decl): Add view param.  Test it against last.
	(new_loc_list): Add view params.  Record them.
	(AT_loc_list_ptr): Handle loc and view lists.
	(view_list_to_loc_list_val_node): New.
	(print_dw_val): Handle dw_val_class_view_list.
	(size_of_die): Likewise.
	(value_format): Likewise.
	(loc_list_has_views): New.
	(gen_llsym): Set vl_symbol too.
	(maybe_gen_llsym, skip_loc_list_entry): New.
	(dwarf2out_maybe_output_loclist_view_pair): New.
	(output_loc_list): Output view list or entries too.
	(output_view_list_offset): New.
	(output_die): Handle dw_val_class_view_list.
	(output_dwarf_version): New.
	(output_compilation_unit_header): Use it.
	(output_skeleton_debug_sections): Likewise.
	(output_rnglists, output_line_info): Likewise.
	(output_pubnames, output_aranges): Update version comments.
	(output_one_line_info_table): Output view numbers in asm comments.
	(dw_loc_list): Determine current endview, pass it to new_loc_list.
	Call maybe_gen_llsym.
	(loc_list_from_tree_1): Adjust.
	(add_AT_location_description): Create view list attribute if
	needed, check it's absent otherwise.
	(convert_cfa_to_fb_loc_list): Adjust.
	(maybe_emit_file): Call output_asm_line_debug_info for test.
	(dwarf2out_var_location): Reset views as needed.  Precompute
	add_var_loc_to_decl args.  Call get_attr_min_length only if we have the
	attribute.  Set view.
	(new_line_info_table): Reset next view.
	(set_cur_line_info_table): Call output_asm_line_debug_info for test.
	(dwarf2out_source_line): Likewise.  Output view resets and labels to
	the assembler, or select appropriate line info opcodes.
	(prune_unused_types_walk_attribs): Handle dw_val_class_view_list.
	(optimize_string_length): Catch it.  Adjust.
	(resolve_addr): Copy vl_symbol along with ll_symbol.  Handle
	dw_val_class_view_list, and remove it if no longer needed.
	(hash_loc_list): Hash view numbers.
	(loc_list_hasher::equal): Compare them.
	(optimize_location_lists): Check whether a view list symbol is
	needed, and whether the locview attribute is present, and
	whether they match.  Remove the locview attribute if no longer
	needed.
	(index_location_lists): Call skip_loc_list_entry for test.
	(dwarf2out_finish): Call output_asm_line_debug_info for test.
	Use output_dwarf_version.
	* dwarf2out.h (enum dw_val_class): Add dw_val_class_view_list.
	(struct dw_val_node): Add val_view_list.
	* final.c (SEEN_NEXT_VIEW): New.
	(set_next_view_needed): New.
	(clear_next_view_needed): New.
	(maybe_output_next_view): New.
	(final_start_function): Rename to...
	(final_start_function_1): ... this.  Take pointer to FIRST,
	add SEEN parameter.  Emit param bindings in the initial view.
	(final_start_function): Reintroduce SEEN-less interface.
	(final): Rename to...
	(final_1): ... this.  Take SEEN parameter.  Output final pending
	next view at the end.
	(final): Reintroduce seen-less interface.
	(final_scan_insn): Output pending next view before switching
	sections or ending a block.  Mark the next view as needed when
	outputting variable locations.  Notify debug backend of section
	changes, and of location view changes.
	(rest_of_handle_final): Adjust.
	* toplev.c (process_options): Autodetect value for debug variable
	location views option.  Warn on incompat5 without -gdwarf-5.
	* doc/invoke.texi (gvariable-location-views): New.
	(gvariable-location-views=incompat5): New.
	(gno-variable-location-views): New.

2018-02-08  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/84136
	* tree-cfg.c (find_taken_edge_computed_goto): Remove assertion
	that the result of find_edge is non-NULL.

2018-02-08  Sergey Shalnov  <sergey.shalnov@intel.com>

	PR target/83008
	* config/i386/x86-tune-costs.h (skylake_cost): Fix cost of
	storing integer register in SImode.  Fix cost of 256 and 512
	byte aligned SSE register store.

2018-02-08  Sergey Shalnov  <sergey.shalnov@intel.com>

	* config/i386/i386.c (ix86_multiplication_cost): Fix
	multiplication cost for TARGET_AVX512DQ.

2018-02-08  Marek Polacek  <polacek@redhat.com>

	PR tree-optimization/84238
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Verify the result of
	get_range_strlen.

2018-02-08  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/84265
	* tree-vect-stmts.c (vectorizable_store): Don't treat
	VMAT_CONTIGUOUS accesses as grouped.
	(vectorizable_load): Likewise.

2018-02-08  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/81635
	* wide-int.h (wi::round_down_for_mask, wi::round_up_for_mask): Declare.
	* wide-int.cc (wi::round_down_for_mask, wi::round_up_for_mask)
	(test_round_for_mask): New functions.
	(wide_int_cc_tests): Call test_round_for_mask.
	* tree-vrp.h (intersect_range_with_nonzero_bits): Declare.
	* tree-vrp.c (intersect_range_with_nonzero_bits): New function.
	* tree-data-ref.c (split_constant_offset_1): Use it to refine the
	range returned by get_range_info.

2018-02-08  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/81360
	* cgraph.h (symtab_node::output_to_lto_symbol_table_p): Declare
	* symtab.c: Include builtins.h
	(symtab_node::output_to_lto_symbol_table_p): Move here
	from lto-streamer-out.c:output_symbol_p.
	* lto-streamer-out.c (write_symbol): Turn early exit to assert.
	(output_symbol_p): Move all logic to symtab.c
	(produce_symtab): Update.

2018-02-08  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* config/s390/s390-opts.h (enum indirect_branch): Define.
	* config/s390/s390-protos.h (s390_return_addr_from_memory)
	(s390_indirect_branch_via_thunk)
	(s390_indirect_branch_via_inline_thunk): Add function prototypes.
	(enum s390_indirect_branch_type): Define.
	* config/s390/s390.c (struct s390_frame_layout, struct
	machine_function): Remove.
	(indirect_branch_prez10thunk_mask, indirect_branch_z10thunk_mask)
	(indirect_branch_table_label_no, indirect_branch_table_name):
	Define variables.
	(INDIRECT_BRANCH_NUM_OPTIONS): Define macro.
	(enum s390_indirect_branch_option): Define.
	(s390_return_addr_from_memory): New function.
	(s390_handle_string_attribute): New function.
	(s390_attribute_table): Add new attribute handler.
	(s390_execute_label): Handle UNSPEC_EXECUTE_JUMP patterns.
	(s390_indirect_branch_via_thunk): New function.
	(s390_indirect_branch_via_inline_thunk): New function.
	(s390_function_ok_for_sibcall): When jumping via thunk disallow
	sibling call optimization for non z10 compiles.
	(s390_emit_call): Force indirect branch target to be a single
	register.  Add r1 clobber for non-z10 compiles.
	(s390_emit_epilogue): Emit return jump via return_use expander.
	(s390_reorg): Handle JUMP_INSNs as execute targets.
	(s390_option_override_internal): Perform validity checks for the
	new command line options.
	(s390_indirect_branch_attrvalue): New function.
	(s390_indirect_branch_settings): New function.
	(s390_set_current_function): Invoke s390_indirect_branch_settings.
	(s390_output_indirect_thunk_function):  New function.
	(s390_code_end): Implement target hook.
	(s390_case_values_threshold): Implement target hook.
	(TARGET_ASM_CODE_END, TARGET_CASE_VALUES_THRESHOLD): Define target
	macros.
	* config/s390/s390.h (struct s390_frame_layout)
	(struct	machine_function): Move here from s390.c.
	(TARGET_INDIRECT_BRANCH_NOBP_RET)
	(TARGET_INDIRECT_BRANCH_NOBP_JUMP)
	(TARGET_INDIRECT_BRANCH_NOBP_JUMP_THUNK)
	(TARGET_INDIRECT_BRANCH_NOBP_JUMP_INLINE_THUNK)
	(TARGET_INDIRECT_BRANCH_NOBP_CALL)
	(TARGET_DEFAULT_INDIRECT_BRANCH_TABLE)
	(TARGET_INDIRECT_BRANCH_THUNK_NAME_EXRL)
	(TARGET_INDIRECT_BRANCH_THUNK_NAME_EX)
	(TARGET_INDIRECT_BRANCH_TABLE): Define macros.
	* config/s390/s390.md (UNSPEC_EXECUTE_JUMP)
	(INDIRECT_BRANCH_THUNK_REGNUM): Define constants.
	(mnemonic attribute): Add values which aren't recognized
	automatically.
	("*cjump_long", "*icjump_long", "*basr", "*basr_r"): Disable
	pattern for branch conversion.  Fix mnemonic attribute.
	("*c<code>", "*sibcall_br", "*sibcall_value_br", "*return"): Emit
	indirect branch via thunk if requested.
	("indirect_jump", "<code>"): Expand patterns for branch conversion.
	("*indirect_jump"): Disable for branch conversion using out of
	line thunks.
	("indirect_jump_via_thunk<mode>_z10")
	("indirect_jump_via_thunk<mode>")
	("indirect_jump_via_inlinethunk<mode>_z10")
	("indirect_jump_via_inlinethunk<mode>", "*casesi_jump")
	("casesi_jump_via_thunk<mode>_z10", "casesi_jump_via_thunk<mode>")
	("casesi_jump_via_inlinethunk<mode>_z10")
	("casesi_jump_via_inlinethunk<mode>", "*basr_via_thunk<mode>_z10")
	("*basr_via_thunk<mode>", "*basr_r_via_thunk_z10")
	("*basr_r_via_thunk", "return<mode>_prez10"): New pattern.
	("*indirect2_jump"): Disable for branch conversion.
	("casesi_jump"): Turn into expander and expand patterns for branch
	conversion.
	("return_use"): New expander.
	("*return"): Emit return via thunk and rename it to ...
	("*return<mode>"): ... this one.
	* config/s390/s390.opt: Add new options and and enum for the
	option values.

2018-02-08  Richard Sandiford  <richard.sandiford@linaro.org>

	* lra-constraints.c (match_reload): Unconditionally use
	gen_lowpart_SUBREG, rather than selecting between that
	and equivalent gen_rtx_SUBREG code.

2018-02-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84233
	* tree-ssa-phiprop.c (propagate_with_phi): Use separate
	changed flag instead of boguously re-using phi_inserted.

2018-02-08  Martin Jambor  <mjambor@suse.cz>

	* hsa-gen.c (get_symbol_for_decl): Set program allocation for
	static local variables.

2018-02-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84278
	* tree-vect-stmts.c (vectorizable_store): When looking for
	smaller vector types to perform grouped strided loads/stores
	make sure the mode is supported by the target.
	(vectorizable_load): Likewise.

2018-02-08  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (aarch64_components_for_bb):
	Increase LDP/STP opportunities by adding adjacent callee-saves.

2018-02-08  Wilco Dijkstra  <wdijkstr@arm.com>

	PR rtl-optimization/84068
	PR rtl-optimization/83459
	* haifa-sched.c (rank_for_schedule): Fix SCHED_PRESSURE_MODEL sorting.

2018-02-08  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/84224
	* gimple-ssa-warn-alloca.c (pass_walloca::execute): Remove assert.
	* calls.c (gimple_alloca_call_p): Only return TRUE when we have
	non-zero arguments.

2018-02-07  Iain Sandoe  <iain@codesourcery.com>

	PR target/84113
	* config/rs6000/altivec.md (*restore_world): Remove LR use.
	* config/rs6000/predicates.md (restore_world_operation): Adjust op
	count, remove one USE.

2018-02-07  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* doc/install.texi (Configuration): Document the
	--with-long-double-format={ibm,ieee} PowerPC configuration
	options.

	PR target/84154
	* config/rs6000/rs6000.md (fix_trunc<SFDF:mode><QHI:mode>2):
	Convert from define_expand to be define_insn_and_split.  Rework
	float/double/_Float128 conversions to QI/HI/SImode to work with
	both ISA 2.07 (power8) or ISA 3.0 (power9).  Fix regression where
	conversions to QI/HImode types did a store and then a load to
	truncate the value.  For conversions to VSX registers, don't split
	the insn, instead emit the code directly.  Use the code iterator
	any_fix to combine signed and unsigned conversions.
	(fix<uns>_trunc<SFDF:mode>si2_p8): Likewise.
	(fixuns_trunc<SFDF:mode><QHI:mode>2): Likewise.
	(fix_trunc<IEEE128:mode><QHI:mode>2): Likewise.
	(fix<uns>_trunc<SFDF:mode><QHI:mode>2): Likewise.
	(fix_<mode>di2_hw): Likewise.
	(fixuns_<mode>di2_hw): Likewise.
	(fix_<mode>si2_hw): Likewise.
	(fixuns_<mode>si2_hw): Likewise.
	(fix<uns>_<IEEE128:mode><SDI:mode>2_hw): Likewise.
	(fix<uns>_trunc<IEEE128:mode><QHI:mode>2): Likewise.
	(fctiw<u>z_<mode>_smallint): Rename fctiw<u>z_<mode>_smallint to
	fix<uns>_trunc<SFDF:mode>si2_p8.
	(fix_trunc<SFDF:mode><QHI:mode>2_internal): Delete, no longer used.
	(fixuns_trunc<SFDF:mode><QHI:mode>2_internal): Likewise.
	(fix<uns>_<mode>_mem): Likewise.
	(fctiw<u>z_<mode>_mem): Likewise.
	(fix<uns>_<mode>_mem): Likewise.
	(fix<uns>_trunc<SFDF:mode><QHSI:mode>2_mem): On ISA 3.0, prevent
	the register allocator from doing a direct move to the GPRs to do
	a store, and instead use the ISA 3.0 store byte/half-word from
	vector register instruction.  For IEEE 128-bit floating point,
	also optimize stores of 32-bit ints.
	(fix<uns>_trunc<IEEE128:mode><QHSI:mode>2_mem): Likewise.

2018-02-07  Alan Hayward  <alan.hayward@arm.com>

	* genextract.c (push_pathstr_operand): New function to support
	[a-zA-Z].
	(walk_rtx): Call push_pathstr_operand.
	(print_path): Support [a-zA-Z].

2018-02-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84037
	* tree-vectorizer.h (struct _loop_vec_info): Add ivexpr_map member.
	(cse_and_gimplify_to_preheader): Declare.
	(vect_get_place_in_interleaving_chain): Likewise.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	ivexpr_map.
	(_loop_vec_info::~_loop_vec_info): Delete it.
	(cse_and_gimplify_to_preheader): New function.
	* tree-vect-slp.c (vect_get_place_in_interleaving_chain): Export.
	* tree-vect-stmts.c (vectorizable_store): CSE base and steps.
	(vectorizable_load): Likewise.  For grouped stores always base
	the IV on the first element.
	* tree-vect-loop-manip.c (vect_loop_versioning): Unshare versioning
	condition before gimplifying.

2018-02-07  Jakub Jelinek  <jakub@redhat.com>

	* tree-eh.c (operation_could_trap_helper_p): Ignore honor_trapv for
	*DIV_EXPR and *MOD_EXPR.

2018-02-07  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/84248
	* config/i386/i386.c (ix86_option_override_internal): Mask out
	the CF_SET bit when checking -fcf-protection.

2018-02-07  Tom de Vries  <tom@codesourcery.com>

	PR libgomp/84217
	* omp-expand.c (expand_oacc_collapse_init): Ensure diff_type is large
	enough.

2018-02-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84204
	* tree-chrec.c (chrec_fold_plus_1): Remove size limiting in
	this place.

	PR tree-optimization/84205
	* graphite-isl-ast-to-gimple.c (binary_op_to_tree): Also
	special-case isl_ast_op_zdiv_r.

	PR tree-optimization/84223
	* graphite-scop-detection.c (gather_bbs::before_dom_children):
	Only add conditions from within the region.
	(gather_bbs::after_dom_children): Adjust.

2018-02-07  Georg-Johann Lay  <avr@gjlay.de>

	PR target/84209
	* config/avr/avr.h (GENERAL_REGNO_P, GENERAL_REG_P): New macros.
	* config/avr/avr.md: Only post-reload split REG-REG moves if
	either register is GENERAL_REG_P.

2018-02-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84235
	* tree-ssa-scopedtables.c
	(avail_exprs_stack::simplify_binary_operation): Fir MINUS_EXPR, punt
	if the subtraction is performed in floating point type where NaNs are
	honored.  For *DIV_EXPR, punt for ALL_FRACT_MODE_Ps where we can't
	build 1.  Formatting fix.

2018-02-06  Jakub Jelinek  <jakub@redhat.com>

	PR target/84146
	* config/i386/i386.c (rest_of_insert_endbranch): Only skip
	NOTE_INSN_CALL_ARG_LOCATION after a call, not anything else,
	and skip it regardless of bb boundaries.  Use CALL_P macro,
	don't test INSN_P (insn) together with CALL_P or JUMP_P check
	unnecessarily, formatting fix.

2018-02-06  Michael Collison  <michael.collison@arm.com>

	* config/arm/thumb2.md:
	(*thumb2_mov_negscc): Split only if TARGET_THUMB2 && !arm_restrict_it.
	(*thumb_mov_notscc): Ditto.

2018-02-06  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/84154
	* config/rs6000/rs6000.md (su code attribute): Use "u" for
	unsigned_fix, not "s".

2018-02-06  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* configure.ac (gcc_fn_eh_frame_ro): New function.
	(gcc_cv_as_cfi_directive): Check both 32 and 64-bit assembler for
	correct .eh_frame permissions.
	* configure: Regenerate.

2018-02-06  Andrew Jenner  <andrew@codeourcery.com>

	* doc/invoke.texi: Add section for the PowerPC SPE backend. Remove
	irrelevant options.

2018-02-06  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Display warning message for -mno-speculate-indirect-jumps.

2018-02-06  Andrew Jenner  <andrew@codesourcery.com>

	* config/powerpcspe/powerpcspe.opt: (msimple-fpu, mfpu) Add
	Undocumented.
	* config/powerpcspe/sysv4.opt (mbit-align): Likewise.

2018-02-06  Aldy Hernandez  <aldyh@redhat.com>

	PR tree-optimization/84225
	* tree-eh.c (find_trapping_overflow): Only call
	operation_no_trapping_overflow when ANY_INTEGRAL_TYPE_P.

2018-02-06  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	PR target/84145
	* config/i386/i386.c: Reimplement the check of possible options
	-mibt/-mshstk conbination. Change error messages.
	* doc/invoke.texi: Fix a typo: remove extra '='.

2018-02-06  Marek Polacek  <polacek@redhat.com>

	PR tree-optimization/84228
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Skip debug statements.

2018-02-06  Tamar Christina  <tamar.christina@arm.com>

	PR target/82641
	* config/arm/arm.c (arm_print_asm_arch_directives): Record already
	emitted arch directives.
	* config/arm/arm-c.c (arm_cpu_builtins): Undefine __ARM_ARCH and
	__ARM_FEATURE_COPROC before changing architectures.

2018-02-06  Richard Biener  <rguenther@suse.de>

	* config/i386/i386.c (print_reg): Fix typo.
	(ix86_loop_unroll_adjust): Do not unroll beyond the original nunroll.

2018-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* configure: Regenerate.

2018-02-05  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83369
	* tree-ssa-ccp.c (pass_post_ipa_warn::execute): Use %G to print
	inlining context.

2018-02-05  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Cherry-pick upstream r323995.

2018-02-05  Richard Sandiford  <richard.sandiford@linaro.org>

	* ira.c (ira_init_register_move_cost): Adjust comment.

2018-02-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/84137
	* doc/gcov.texi: Fix typo in documentation.

2018-02-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/83879
	* doc/gcov.texi: Document necessity of --dynamic-list-data when
	using dlopen functionality.

2018-02-05  Olga Makhotina  <olga.makhotina@intel.com>

	* config/i386/avx512dqintrin.h (_mm_mask_range_sd, _mm_maskz_range_sd,
	_mm_mask_range_round_sd, _mm_maskz_range_round_sd, _mm_mask_range_ss,
	_mm_maskz_range_ss, _mm_mask_range_round_ss,
	_mm_maskz_range_round_ss): New intrinsics.
	(__builtin_ia32_rangesd128_round)
	(__builtin_ia32_rangess128_round): Remove.
	(__builtin_ia32_rangesd128_mask_round,
	__builtin_ia32_rangess128_mask_round): New builtins.
	* config/i386/i386-builtin.def (__builtin_ia32_rangesd128_round,
	__builtin_ia32_rangess128_round): Remove.
	(__builtin_ia32_rangesd128_mask_round,
	__builtin_ia32_rangess128_mask_round): New builtins.
	* config/i386/sse.md (ranges<mode><round_saeonly_name>): Renamed to ...
	(ranges<mode><mask_scalar_name><round_saeonly_scalar_name>): ... this.
	((match_operand:VF_128 2 "<round_saeonly_nimm_predicate>"
	"<round_saeonly_constraint>")): Changed to ...
	((match_operand:VF_128 2 "<round_saeonly_scalar_nimm_predicate>"
	"<round_saeonly_scalar_constraint>")): ... this.
	("vrange<ssescalarmodesuffix>\t{%3, <round_saeonly_op4>%2, %1, %0|
	%0, %1, %2<round_saeonly_op4>, %3}"): Changed to ...
	("vrange<ssescalarmodesuffix>\t{%3, <round_saeonly_scalar_mask_op4>%2,
	%1, %0<mask_scalar_operand4>|%0<mask_scalar_operand4>, %1,
	%2<round_saeonly_scalar_mask_op4>, %3}"): ... this.

2018-02-02  Andrew Jenner  <andrew@codesourcery.com>

	* config/powerpcspe/powerpcspe.opt: Add Undocumented to irrelevant
	options.
	* config/powerpcspe/powerpcspe-tables.opt (rs6000_cpu_opt_value):
	Remove all values except native, 8540 and 8548.

2018-02-02  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (ix86_output_function_return): Pass
	INVALID_REGNUM, instead of -1, as invalid register number to
	indirect_thunk_name and output_indirect_thunk.

2018-02-02  Julia Koval  <julia.koval@intel.com>

	* config.gcc: Add -march=icelake.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect icelake.
	* config/i386/i386-c.c (ix86_target_macros_internal): Handle icelake.
	* config/i386/i386.c (processor_costs): Add m_ICELAKE.
	(PTA_ICELAKE, PTA_AVX512VNNI, PTA_GFNI, PTA_VAES, PTA_AVX512VBMI2,
	PTA_VPCLMULQDQ, PTA_RDPID, PTA_AVX512BITALG): New.
	(processor_target_table): Add icelake.
	(ix86_option_override_internal): Handle new PTAs.
	(get_builtin_code_for_version): Handle icelake.
	(M_INTEL_COREI7_ICELAKE): New.
	(fold_builtin_cpu): Handle icelake.
	* config/i386/i386.h (TARGET_ICELAKE, PROCESSOR_ICELAKE): New.
	* doc/invoke.texi: Add -march=icelake.

2018-02-02  Julia Koval  <julia.koval@intel.com>

	* config/i386/i386.c (ix86_option_override_internal): Change flags type
	to wide_int_bitmask.
	* wide-int-bitmask.h: New.

2018-02-02  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	PR target/84066
	* config/i386/i386.md: Replace Pmode with word_mode in
	builtin_setjmp_setup and builtin_longjmp to support x32.

2018-02-01  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/56010
	PR target/83743
	* config/rs6000/driver-rs6000.c: #include "diagnostic.h".
	#include "opts.h".
	(rs6000_supported_cpu_names): New static variable.
	(linux_cpu_translation_table): Likewise.
	(elf_platform) <cpu>: Define new static variable and use it.
	Translate kernel AT_PLATFORM name to canonical name if needed.
	Error if platform name is unknown.

2018-02-01  Aldy Hernandez  <aldyh@redhat.com>

	PR target/84089
	* config/pa/predicates.md (base14_operand): Handle E_VOIDmode.

2018-02-01  Jeff Law  <law@redhat.com>

	PR target/84128
	* config/i386/i386.c (release_scratch_register_on_entry): Add new
	OFFSET and RELEASE_VIA_POP arguments.  Use SP+OFFSET to restore
	the scratch if RELEASE_VIA_POP is false.
	(ix86_adjust_stack_and_probe_stack_clash): Un-constify SIZE.
	If we have to save a temporary register, decrement SIZE appropriately.
	Pass new arguments to release_scratch_register_on_entry.
	(ix86_adjust_stack_and_probe): Likewise.
	(ix86_emit_probe_stack_range): Pass new arguments to
	release_scratch_register_on_entry.

2018-02-01  Uros Bizjak  <ubizjak@gmail.com>

	PR rtl-optimization/84157
	* combine.c (change_zero_ext): Use REG_P predicate in
	front of HARD_REGISTER_P predicate.

2018-02-01  Georg-Johann Lay  <avr@gjlay.de>

	* config/avr/avr.c (avr_option_override): Move disabling of
	-fdelete-null-pointer-checks to...
	* common/config/avr/avr-common.c (avr_option_optimization_table):
	...here.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/81635
	* tree-data-ref.c (split_constant_offset_1): For types that
	wrap on overflow, try to use range info to prove that wrapping
	cannot occur.

2018-02-01  Renlin Li  <renlin.li@arm.com>

	PR target/83370
	* config/aarch64/aarch64.c (aarch64_class_max_nregs): Handle
	TAILCALL_ADDR_REGS.
	(aarch64_register_move_cost): Likewise.
	* config/aarch64/aarch64.h (reg_class): Rename CALLER_SAVE_REGS to
	TAILCALL_ADDR_REGS.
	(REG_CLASS_NAMES): Likewise.
	(REG_CLASS_CONTENTS): Rename CALLER_SAVE_REGS to
	TAILCALL_ADDR_REGS. Remove IP registers.
	* config/aarch64/aarch64.md (Ucs): Update register constraint.

2018-02-01  Richard Biener  <rguenther@suse.de>

	* domwalk.h (dom_walker::dom_walker): Add additional constructor
	for specifying RPO order and allow NULL for that.
	* domwalk.c (dom_walker::dom_walker): Likewise.
	(dom_walker::walk): Handle NULL RPO order.
	* tree-into-ssa.c (rewrite_dom_walker): Do not walk dom children
	in RPO order.
	(rewrite_update_dom_walker): Likewise.
	(mark_def_dom_walker): Likewise.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64-protos.h (aarch64_split_sve_subreg_move)
	(aarch64_maybe_expand_sve_subreg_move): Declare.
	* config/aarch64/aarch64.md (UNSPEC_REV_SUBREG): New unspec.
	* config/aarch64/predicates.md (aarch64_any_register_operand): New
	predicate.
	* config/aarch64/aarch64-sve.md (mov<mode>): Optimize subreg moves
	that are semantically a reverse operation.
	(*aarch64_sve_mov<mode>_subreg_be): New pattern.
	* config/aarch64/aarch64.c (aarch64_maybe_expand_sve_subreg_move):
	(aarch64_replace_reg_mode, aarch64_split_sve_subreg_move): New
	functions.
	(aarch64_can_change_mode_class): For big-endian, forbid changes
	between two SVE modes if they have different element sizes.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_expand_sve_const_vector): Prefer
	the TImode handling for big-endian targets.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64-sve.md (sve_ld1rq): Replace with...
	(*sve_ld1rq<Vesize>): ... this new pattern.  Handle all element sizes,
	not just bytes.
	* config/aarch64/aarch64.c (aarch64_expand_sve_widened_duplicate):
	Remove BSWAP handing for big-endian targets and use the form of
	LD1RQ appropariate for the mode.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_simd_valid_immediate): Handle
	all CONST_VECTOR_DUPLICATE_P vectors, not just those with a single
	duplicated element.

2018-02-01  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tearget/83845
	* config/aarch64/aarch64.c (aarch64_secondary_reload): Tighten
	check for operands that need to go through aarch64_sve_reload_be.

2018-02-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/81661
	PR tree-optimization/84117
	* tree-eh.h (rewrite_to_non_trapping_overflow): Declare.
	* tree-eh.c: Include gimplify.h.
	(find_trapping_overflow, replace_trapping_overflow,
	rewrite_to_non_trapping_overflow): New functions.
	* tree-vect-loop.c: Include tree-eh.h.
	(vect_get_loop_niters): Use rewrite_to_non_trapping_overflow.
	* tree-data-ref.c: Include tree-eh.h.
	(get_segment_min_max): Use rewrite_to_non_trapping_overflow.

2018-01-31  Uros Bizjak  <ubizjak@gmail.com>

	PR rtl-optimization/84123
	* combine.c (change_zero_ext): Check if hard register satisfies
	can_change_dest_mode before calling gen_lowpart_SUBREG.

2018-01-31  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/82444
	* ira.c (ira_init_register_move_cost): Remove assert.

2018-01-31  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/84071
	* doc/tm.texi.in (WORD_REGISTER_OPERATIONS): Add explicit case.
	* doc/tm.texi: Regenerate.

2018-01-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84132
	* tree-data-ref.c (analyze_miv_subscript): Properly
	check whether evolution_function_is_affine_multivariate_p
	before calling gcd_of_steps_may_divide_p.

2018-01-31  Julia Koval  <julia.koval@intel.com>

	PR target/83618
	* config/i386/i386.c (ix86_expand_builtin): Handle IX86_BUILTIN_RDPID.
	* config/i386/i386.md (rdpid_rex64) New.
	(rdpid): Make 32bit only.

2018-01-29  Aldy Hernandez  <aldyh@redhat.com>

	PR lto/84105
	* tree-pretty-print.c (dump_generic_node): Handle a TYPE_NAME with
	an IDENTIFIER_NODE for FUNCTION_TYPE's.

2018-01-31  Eric Botcazou  <ebotcazou@adacore.com>

	Revert
	2018-01-12  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc.md (vxworks_load_got): Set the GOT register.

2018-01-31  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/84071
	* combine.c (record_dead_and_set_regs_1): Record the source unmodified
	for a paradoxical SUBREG on a WORD_REGISTER_OPERATIONS target.

2018-01-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_handle_aux_attribute): New function.
	(arc_attribute_table): Add 'aux' attribute.
	(arc_in_small_data_p): Consider aux like variables.
	(arc_is_aux_reg_p): New function.
	(arc_asm_output_aligned_decl_local): Ignore 'aux' like variables.
	(arc_get_aux_arg): New function.
	(prepare_move_operands): Handle aux-register access.
	(arc_handle_aux_attribute): New function.
	* doc/extend.texi (ARC Variable attributes): Add subsection.

2018-01-31  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_is_uncached_mem_p): Function proto.
	* config/arc/arc.c (arc_handle_uncached_attribute): New function.
	(arc_attribute_table): Add 'uncached' attribute.
	(arc_print_operand): Print '.di' flag for uncached memory
	accesses.
	(arc_in_small_data_p): Do not consider for small data the uncached
	types.
	(arc_is_uncached_mem_p): New function.
	* config/arc/predicates.md (compact_store_memory_operand): Check
	for uncached memory accesses.
	(nonvol_nonimm_operand): Likewise.
	* doc/extend.texi (ARC Type Attribute): New subsection.

2018-01-31  Jakub Jelinek  <jakub@redhat.com>

	PR c/84100
	* common.opt (falign-functions=, falign-jumps=, falign-labels=,
	falign-loops=): Add Optimization flag.

2018-01-30  Jeff Law  <law@redhat.com>

	PR target/84064
	* i386.c (ix86_adjust_stack_and_probe_stack_clash): New argument
	INT_REGISTERS_SAVED.  Check it prior to calling
	get_scratch_register_on_entry.
	(ix86_adjust_stack_and_probe): Similarly.
	(ix86_emit_probe_stack_range): Similarly.
	(ix86_expand_prologue): Corresponding changes.

2018-01-30  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR target/40411
	* config/sol2.h (STARTFILE_ARCH_SPEC): Use -std=c*,
	-std=iso9899:199409 instead of -pedantic to select values-Xc.o.

2018-01-30  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/84112
	* lra-constraints.c (curr_insn_transform): Process AND in the
	address.

2018-01-30  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/83986
	* sched-deps.c (sched_analyze_insn): For frame related insns, add anti
	dependence against last_pending_memory_flush in addition to
	pending_jump_insns.

2018-01-30  Alexandre Oliva  <aoliva@redhat.com>

	PR tree-optimization/81611
	* tree-ssa-dom.c (simple_iv_increment_p): Skip intervening
	copies.

2018-01-30  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	PR target/83758
	* config/rs6000/rs6000.c (rs6000_internal_arg_pointer): Only return
	a reg rtx.

2018-01-30  Richard Biener  <rguenther@suse.de>
	    Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/84111
	* tree-ssa-loop-ivcanon.c (tree_unroll_loops_completely_1): Skip
	inner loops added during recursion, as they don't have up-to-date
	SSA form.

2018-01-30  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/81360
	* ipa-inline.c (can_inline_edge_p): Break out late tests to...
	(can_inline_edge_by_limits_p): ... here.
	(can_early_inline_edge_p, check_callers,
	update_caller_keys, update_callee_keys, recursive_inlining,
	add_new_edges_to_heap, speculation_useful_p,
	inline_small_functions,
	inline_small_functions, flatten_function,
	inline_to_all_callers_1): Update.

2018-01-30  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.c (profile_count::combine_with_ipa_count): Handle
	zeros correctly.

2018-01-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83008
	* tree-vect-slp.c (vect_analyze_slp_cost_1): Properly cost
	invariant and constant vector uses in stmts when they need
	more than one stmt.

2018-01-30  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR bootstrap/84017
	* configure.ac (gcc_cv_as_shf_merge): Disable on Solaris 10/x86.
	* configure: Regenerate.

2018-01-30  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64-sve.md (*vec_extract<mode><Vel>_0): New
	pattern.
	(*vec_extract<mode><Vel>_v128): Require a nonzero lane number.
	Use gen_rtx_REG rather than gen_lowpart.

2018-01-30  Richard Sandiford  <richard.sandiford@linaro.org>

	* lra-constraints.c (match_reload): Use subreg_lowpart_offset
	rather than 0 when creating partial subregs.

2018-01-30  Richard Sandiford  <richard.sandiford@linaro.org>

	* vec-perm-indices.c (vec_perm_indices::series_p): Give examples
	of usage.

2018-01-29  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/81550
	* config/rs6000/rs6000.c (rs6000_setup_reg_addr_masks): If DFmode
	and SFmode can go in Altivec registers (-mcpu=power7 for DFmode,
	-mcpu=power8 for SFmode) don't set the PRE_INCDEC or PRE_MODIFY
	flags.  This restores the settings used before the 2017-07-24.
	Turning off pre increment/decrement/modify allows IVOPTS to
	optimize DF/SF loops where the index is an int.

2018-01-29  Richard Biener  <rguenther@suse.de>
	    Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR bootstrap/80867
	* tree-vect-stmts.c (vectorizable_call): Don't call
	targetm.vectorize_builtin_md_vectorized_function if callee is
	NULL.

2018-01-22  Carl Love  <cel@us.ibm.com>

	* doc/extend.tex: Fix typo in second arg in
	__builtin_bcdadd_{lt|eq|gt|ov} and __builtin_bcdsub_{lt|eq|gt|ov}.

2018-01-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84086
	* tree-ssanames.c: Include cfgloop.h and tree-scalar-evolution.h.
	(flush_ssaname_freelist): When SSA names were released reset
	the SCEV hash table.

2018-01-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84057
	* tree-ssa-loop-ivcanon.c (unloop_loops): Deal with already
	removed paths when removing edges.

2018-01-27  H.J. Lu  <hongjiu.lu@intel.com>

	* doc/invoke.texi: Replace -mfunction-return==@var{choice} with
	-mfunction-return=@var{choice}.

2018-01-27  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR diagnostic/84034
	* diagnostic-show-locus.c (get_line_width_without_trailing_whitespace):
	Handle CR like TAB.
	(layout::print_source_line): Likewise.
	(test_get_line_width_without_trailing_whitespace): Add test cases.

2018-01-27  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/84040
	* sched-deps.c (sched_macro_fuse_insns): Return immediately for
	debug insns.

2018-01-26  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.h (MAX_FIXED_MODE_SIZE): New.

	* config/riscv/elf.h (LIB_SPEC): Don't include -lgloss when nosys.specs
	specified.

2018-01-26  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.md: Add peepholes for CMP + SUB -> SUBS
	and CMP + SUB-immediate -> SUBS.

2018-01-26  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83896
	* tree-ssa-strlen.c (get_string_len): Rename...
	(get_string_cst_length): ...to this.  Return HOST_WIDE_INT.
	Avoid assuming length is constant.
	(handle_char_store): Use HOST_WIDE_INT for string length.

2018-01-26  Uros Bizjak  <ubizjak@gmail.com>

	PR target/81763
	* config/i386/i386.md (*andndi3_doubleword): Add earlyclobber
	to (=&r,r,rm) alternative. Add (=r,0,rm) and (=r,r,0) alternatives.

2018-01-26  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/84003
	* dse.c (record_store): Only record redundant stores when
	the earlier store aliases at least all accesses the later one does.

2018-01-26  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/83985
	* dce.c (deletable_insn_p): Return false for separate shrink wrapping
	REG_CFA_RESTORE insns.
	(delete_unmarked_insns): Don't ignore separate shrink wrapping
	REG_CFA_RESTORE insns here.

	PR c/83989
	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): Don't
	use SSA_NAME_VAR as base for SSA_NAMEs with non-NULL SSA_NAME_VAR.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-arch.h (arc_tune_attr): Add ARC_TUNE_CORE_3.
	* config/arc/arc.c (arc_sched_issue_rate): Use ARC_TUNE_... .
	(arc_init): Likewise.
	(arc_override_options): Likewise.
	(arc_file_start): Choose Tag_ARC_CPU_variation based on arc_tune
	value.
	(hwloop_fail): Use TARGET_DBNZ when we want to check for dbnz insn
	support.
	* config/arc/arc.h (TARGET_DBNZ): Define.
	* config/arc/arc.md (attr tune): Add core_3, use ARC_TUNE_... to
	properly set the tune attribute.
	(dbnz): Use TARGET_DBNZ guard.
	* config/arc/arc.opt (mtune): Add core3 option.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_delegitimize_address_0): Refactored to
	recognize new pic like addresses.
	(arc_delegitimize_address): Clean up.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-arches.def: Option mrf16 valid for all
	architectures.
	* config/arc/arc-c.def (__ARC_RF16__): New predefined macro.
	* config/arc/arc-cpus.def (em_mini): New cpu with rf16 on.
	* config/arc/arc-options.def (FL_RF16): Add mrf16 option.
	* config/arc/arc-tables.opt: Regenerate.
	* config/arc/arc.c (arc_conditional_register_usage): Handle
	reduced register file case.
	(arc_file_start): Set must have build attributes.
	* config/arc/arc.h (MAX_ARC_PARM_REGS): Conditional define using
	mrf16 option value.
	* config/arc/arc.opt (mrf16): Add new option.
	* config/arc/elf.h (ATTRIBUTE_PCS): Define.
	* config/arc/genmultilib.awk: Handle new mrf16 option.
	* config/arc/linux.h (ATTRIBUTE_PCS): Define.
	* config/arc/t-multilib: Regenerate.
	* doc/invoke.texi (ARC Options): Document mrf16 option.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h: Add arc_is_secure_call_p proto.
	* config/arc/arc.c (arc_handle_secure_attribute): New function.
	(arc_attribute_table): Add 'secure_call' attribute.
	(arc_print_operand): Print secure call operand.
	(arc_function_ok_for_sibcall): Don't optimize tail calls when
	secure.
	(arc_is_secure_call_p): New function.  * config/arc/arc.md
	(call_i): Add support for sjli instruction.
	(call_value_i): Likewise.
	* config/arc/constraints.md (Csc): New constraint.

2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>
	    John Eric Martin  <John.Martin@emmicro-us.com>

	* config/arc/arc-protos.h: Add arc_is_jli_call_p proto.
	* config/arc/arc.c (_arc_jli_section): New struct.
	(arc_jli_section): New type.
	(rc_jli_sections): New static variable.
	(arc_handle_jli_attribute): New function.
	(arc_attribute_table): Add jli_always and jli_fixed attribute.
	(arc_file_end): New function.
	(TARGET_ASM_FILE_END): Define.
	(arc_print_operand): Reuse 'S' letter for JLI output instruction.
	(arc_add_jli_section): New function.
	(jli_call_scan): Likewise.
	(arc_reorg): Call jli_call_scan.
	(arc_output_addsi): Remove 'S' from printing asm operand.
	(arc_is_jli_call_p): New function.
	* config/arc/arc.md (movqi_insn): Remove 'S' from printing asm
	operand.
	(movhi_insn): Likewise.
	(movsi_insn): Likewise.
	(movsi_set_cc_insn): Likewise.
	(loadqi_update): Likewise.
	(load_zeroextendqisi_update): Likewise.
	(load_signextendqisi_update): Likewise.
	(loadhi_update): Likewise.
	(load_zeroextendhisi_update): Likewise.
	(load_signextendhisi_update): Likewise.
	(loadsi_update): Likewise.
	(loadsf_update): Likewise.
	(movsicc_insn): Likewise.
	(bset_insn): Likewise.
	(bxor_insn): Likewise.
	(bclr_insn): Likewise.
	(bmsk_insn): Likewise.
	(bicsi3_insn): Likewise.
	(cmpsi_cc_c_insn): Likewise.
	(movsi_ne): Likewise.
	(movsi_cond_exec): Likewise.
	(clrsbsi2): Likewise.
	(norm_f): Likewise.
	(normw): Likewise.
	(swap): Likewise.
	(divaw): Likewise.
	(flag): Likewise.
	(sr): Likewise.
	(kflag): Likewise.
	(ffs): Likewise.
	(ffs_f): Likewise.
	(fls): Likewise.
	(call_i): Remove 'S' asm letter, add jli instruction.
	(call_value_i): Likewise.
	* config/arc/arc.op (mjli-always): New option.
	* config/arc/constraints.md (Cji): New constraint.
	* config/arc/fpx.md (addsf3_fpx): Remove 'S' from printing asm
	operand.
	(subsf3_fpx): Likewise.
	(mulsf3_fpx): Likewise.
	* config/arc/simdext.md (vendrec_insn): Remove 'S' from printing
	asm operand.
	* doc/extend.texi (ARC): Document 'jli-always' and 'jli-fixed'
	function attrbutes.
	* doc/invoke.texi (ARC): Document mjli-always option.

2018-01-26  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.c (rl78_addsi3_internal): If operand 2 is const
	avoid addition with 0 and use incw and decw where possible.

2018-01-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/81082
	* fold-const.c (fold_plusminus_mult_expr): Do not perform the
	association if it requires casting to unsigned.
	* match.pd ((A * C) +- (B * C) -> (A+-B)): New patterns derived
	from fold_plusminus_mult_expr to catch important cases late when
	range info is available.

2018-01-26  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/i386/sol2.h (USE_HIDDEN_LINKONCE): Remove.
	* configure.ac (hidden_linkonce): New test.
	* configure: Regenerate.
	* config.in: Regenerate.

2018-01-26  Julia Koval  <julia.koval@intel.com>

	* config/i386/avx512bitalgintrin.h (_mm512_bitshuffle_epi64_mask,
	_mm512_mask_bitshuffle_epi64_mask, _mm256_bitshuffle_epi64_mask,
	_mm256_mask_bitshuffle_epi64_mask, _mm_bitshuffle_epi64_mask,
	_mm_mask_bitshuffle_epi64_mask): Fix type.
	* config/i386/i386-builtin-types.def (UHI_FTYPE_V2DI_V2DI_UHI,
	USI_FTYPE_V4DI_V4DI_USI): Remove.
	* config/i386/i386-builtin.def (__builtin_ia32_vpshufbitqmb512_mask,
	__builtin_ia32_vpshufbitqmb256_mask,
	__builtin_ia32_vpshufbitqmb128_mask): Fix types.
	* config/i386/i386.c (ix86_expand_args_builtin): Remove old types.
	* config/i386/sse.md (VI1_AVX512VLBW): Change types.

2018-01-26  Alan Modra  <amodra@gmail.com>

	PR target/84033
	* config/rs6000/rs6000-p8swap.c (rtx_is_swappable_p): Exclude
	UNSPEC_VBPERMQ.  Sort other unspecs.

2018-01-25  David Edelsohn  <dje.gcc@gmail.com>

	* doc/invoke.texi (PowerPC Options): Document 'native' cpu type.

2018-01-25  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83055
	* predict.c (drop_profile): Do not push/pop cfun; update also
	node->count.
	(handle_missing_profiles): Fix logic looking for zero profiles.

2018-01-25  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83977
	* ipa-fnsummary.c (compute_fn_summary): Clear can_change_signature
	on functions with #pragma omp declare simd or functions with simd
	attribute.
	* omp-simd-clone.c (expand_simd_clones): Revert 2018-01-24 change.
	* config/i386/i386.c (ix86_simd_clone_compute_vecsize_and_simdlen):
	Remove trailing \n from warning_at calls.

2018-01-25  Tom de Vries  <tom@codesourcery.com>

	PR target/84028
	* config/nvptx/nvptx.c (nvptx_single): Add exit insn after noreturn call
	for neutered workers.

2018-01-24  Joseph Myers  <joseph@codesourcery.com>

	PR target/68467
	* config/m68k/m68k.c (m68k_promote_function_mode): New function.
	(TARGET_PROMOTE_FUNCTION_MODE): New macro.

2018-01-24  Jeff Law  <law@redhat.com>

	PR target/83994
	* i386.c (get_probe_interval): Move to earlier point.
	(ix86_compute_frame_layout): If -fstack-clash-protection and
	the frame is larger than the probe interval, then use pushes
	to save registers rather than reg->mem moves.
	(ix86_expand_prologue): Remove conditional for int_registers_saved
	assertion.

2018-01-24  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/84014
	* ira-build.c (setup_min_max_allocno_live_range_point): Set up
	min/max for never referenced object.

2018-01-24  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83977
	* tree.c (free_lang_data_in_decl): Don't clear DECL_ABSTRACT_ORIGIN
	here.
	* omp-low.c (create_omp_child_function): Remove "omp declare simd"
	attributes from DECL_ATTRIBUTES (decl) without affecting
	DECL_ATTRIBUTES (current_function_decl).
	* omp-simd-clone.c (expand_simd_clones): Ignore DECL_ARTIFICIAL
	functions with non-NULL DECL_ABSTRACT_ORIGIN.

2018-01-24  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83979
	* fold-const.c (fold_comparison): Use constant_boolean_node
	instead of boolean_{true,false}_node.

2018-01-24  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-profile.c (ipa_propagate_frequency_1): Fix logic skipping calls
	with zero counts.

2018-01-24  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (*call_indirect_nonlocal_sysv<mode>):
	Simplify the clause that sets the length attribute.
	(*call_value_indirect_nonlocal_sysv<mode>): Likewise.
	(*sibcall_nonlocal_sysv<mode>): Clean up code block; simplify the
	clause that sets the length attribute.
	(*sibcall_value_nonlocal_sysv<mode>): Likewise.

2018-01-24  Tom de Vries  <tom@codesourcery.com>

	PR target/83589
	* config/nvptx/nvptx.c (WORKAROUND_PTXJIT_BUG_2): Define to 1.
	(nvptx_pc_set, nvptx_condjump_label): New function. Copy from jump.c.
	Add strict parameter.
	(prevent_branch_around_nothing): Insert dummy insn between branch to
	label and label with no ptx insn inbetween.
	* config/nvptx/nvptx.md (define_insn "fake_nop"): New insn.

2018-01-24  Tom de Vries  <tom@codesourcery.com>

	PR target/81352
	* config/nvptx/nvptx.c (nvptx_single): Add exit insn after noreturn call
	for neutered threads in warp.
	* config/nvptx/nvptx.md (define_insn "exit"): New insn.

2018-01-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83176
	* tree-chrec.c (chrec_fold_plus_1): Handle (signed T){(T) .. }
	operands.

2018-01-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/82819
	* graphite-isl-ast-to-gimple.c (binary_op_to_tree): Avoid
	code generating pluses that are no-ops in the target precision.

2018-01-24  Richard Biener  <rguenther@suse.de>

	PR middle-end/84000
	* tree-cfg.c (replace_loop_annotate): Handle annot_expr_parallel_kind.

2018-01-23  Jan Hubicka  <hubicka@ucw.cz>

	* cfgcleanup.c (try_crossjump_to_edge): Use combine_with_count
	to merge probabilities.
	* predict.c (probably_never_executed): Also mark as cold functions
	with global 0 profile and guessed local profile.
	* profile-count.c (profile_probability::combine_with_count): New
	member function.
	* profile-count.h (profile_probability::operator*,
	profile_probability::operator*=, profile_probability::operator/,
	profile_probability::operator/=): Reduce precision to adjusted
	and set value to guessed on contradictory divisions.
	(profile_probability::combine_with_freq): Remove.
	(profile_probability::combine_wiht_count): Declare.
	(profile_count::force_nonzero):: Set to adjusted.
	(profile_count::probability_in):: Set quality to adjusted.
	* tree-ssa-tail-merge.c (replace_block_by): Use
	combine_with_count.

2018-01-23  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_stack_boundary): New.
	(riscv_option_override): Set riscv_stack_boundary.  Handle
	riscv_preferred_stack_boundary_arg.
	* config/riscv/riscv.h (MIN_STACK_BOUNDARY, ABI_STACK_BOUNDARY): New.
	(BIGGEST_ALIGNMENT): Set to STACK_BOUNDARY.
	(STACK_BOUNDARY): Set to riscv_stack_boundary.
	(RISCV_STACK_ALIGN): Use STACK_BOUNDARY.
	* config/riscv/riscv.opt (mpreferred-stack-boundary): New.
	* doc/invoke.tex (RISC-V Options): Add -mpreferred-stack-boundary.

2018-01-23  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83905
	* config/i386/i386.c (ix86_expand_prologue): Use cost reference
	of struct ix86_frame.
	(ix86_expand_epilogue): Likewise.  Add a local variable for
	the reg_save_offset field in struct ix86_frame.

2018-01-23  Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/82604
	* tree-loop-distribution.c (enum partition_kind): New enum item
	PKIND_PARTIAL_MEMSET.
	(partition_builtin_p): Support above new enum item.
	(generate_code_for_partition): Ditto.
	(compute_access_range): Differentiate cases that equality can be
	proven at all loops, the innermost loops or no loops.
	(classify_builtin_st, classify_builtin_ldst): Adjust call to above
	function.  Set PKIND_PARTIAL_MEMSET for partition appropriately.
	(finalize_partitions, distribute_loop): Don't fuse partition of
	PKIND_PARTIAL_MEMSET kind when distributing 3-level loop nest.
	(prepare_perfect_loop_nest): Distribute 3-level loop nest only if
	parloop is enabled.

2018-01-23  Martin Liska  <mliska@suse.cz>

	* predict.def (PRED_INDIR_CALL): Set probability to PROB_EVEN in
	order to ignore the predictor.
	(PRED_POLYMORPHIC_CALL): Likewise.
	(PRED_RECURSIVE_CALL): Likewise.

2018-01-23  Martin Liska  <mliska@suse.cz>

	* tree-profile.c (tree_profiling): Print function header to
	aware reader which function we are working on.
	* value-prof.c (gimple_find_values_to_profile): Do not print
	not interesting value histograms.

2018-01-23  Martin Liska  <mliska@suse.cz>

	* profile-count.h (enum profile_quality): Add
	profile_uninitialized as the first value. Do not number values
	as they are zero based.
	(profile_count::verify): Update sanity check.
	(profile_probability::verify): Likewise.

2018-01-23  Nathan Sidwell  <nathan@acm.org>

	* doc/invoke.texi (ffor-scope): Deprecate.

2018-01-23  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/83510
	* domwalk.c (set_all_edges_as_executable): New function.
	(dom_walker::dom_walker): Convert bool param
	"skip_unreachable_blocks" to enum reachability.  Move setup of
	edge flags to set_all_edges_as_executable and only do it when
	reachability is REACHABLE_BLOCKS.
	* domwalk.h (enum dom_walker::reachability): New enum.
	(dom_walker::dom_walker): Convert bool param
	"skip_unreachable_blocks" to enum reachability.
	(set_all_edges_as_executable): New decl.
	* graphite-scop-detection.c  (gather_bbs::gather_bbs): Convert
	from false for "skip_unreachable_blocks" to ALL_BLOCKS for
	"reachability".
	* tree-ssa-dom.c (dom_opt_dom_walker::dom_opt_dom_walker): Likewise,
	but converting true to REACHABLE_BLOCKS.
	* tree-ssa-sccvn.c (sccvn_dom_walker::sccvn_dom_walker): Likewise.
	* tree-vrp.c
	(check_array_bounds_dom_walker::check_array_bounds_dom_walker):
	Likewise, but converting it to REACHABLE_BLOCKS_PRESERVING_FLAGS.
	(vrp_dom_walker::vrp_dom_walker): Likewise, but converting it to
	REACHABLE_BLOCKS.
	(vrp_prop::vrp_finalize): Call set_all_edges_as_executable
	if check_all_array_refs will be called.

2018-01-23  David Malcolm  <dmalcolm@redhat.com>

	* tree.c (selftest::test_location_wrappers): Add more test
	coverage.

2018-01-23  David Malcolm  <dmalcolm@redhat.com>

	* sbitmap.c (selftest::test_set_range): Fix memory leaks.
	(selftest::test_bit_in_range): Likewise.

2018-01-23  Richard Sandiford  <richard.sandiford@linaro.org>

	PR testsuite/83888
	* doc/sourcebuild.texi (vect_float): Say that the selector
	only describes the situation when -funsafe-math-optimizations is on.
	(vect_float_strict): Document.

2018-01-23  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83965
	* tree-vect-patterns.c (vect_reassociating_reduction_p): New function.
	(vect_recog_dot_prod_pattern, vect_recog_sad_pattern): Use it
	instead of checking only for a reduction.
	(vect_recog_widen_sum_pattern): Likewise.

2018-01-23  Jan Hubicka  <hubicka@ucw.cz>

	* predict.c (probably_never_executed): Only use precise profile info.
	(compute_function_frequency): Skip after inlining hack since we now
	have quality checking.

2018-01-23  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.h (profile_probability::very_unlikely,
	profile_probability::unlikely, profile_probability::even): Set
	precision to guessed.

2018-01-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83963
	* graphite-scop-detection.c (scop_detection::harmful_loop_in_region):
	Properly terminate dominator walk when crossing the exit edge not
	when visiting its source block.

2018-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR c++/83918
	* tree.c (maybe_wrap_with_location): Use NON_LVALUE_EXPR rather than
	VIEW_CONVERT_EXPR to wrap CONST_DECLs.

2018-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/83957
	* omp-expand.c (expand_omp_for_generic): Ignore virtual PHIs.  Remove
	semicolon after for body surrounded by braces.

	PR tree-optimization/83081
	* profile-count.h (profile_probability::split): New method.
	* dojump.c (do_jump_1) <case TRUTH_ANDIF_EXPR, case TRUTH_ORIF_EXPR>:
	Use profile_probability::split.
	(do_compare_rtx_and_jump): Fix adjustment of probabilities
	when splitting a single conditional jump into 2.

2018-01-22  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/69452
	* tree-ssa-loop-im.c (class move_computations_dom_walker): Remove
	decl.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78-expand.md (bswaphi2): New define_expand.
	* config/rl78/rl78-virt.md (*bswaphi2_virt): New define_insn.
	* config/rl78/rl78-real.md (*bswaphi2_real): New define_insn.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78-protos.h (rl78_split_movdi): New function
	declaration.
	* config/rl78/rl78.md (movdi): New define_expand.
	* config/rl78/rl78.c (rl78_split_movdi): New function.

2018-01-22  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/83862
	* config/rs6000/rs6000-protos.h (rs6000_split_signbit): Delete,
	no longer used.
	* config/rs6000/rs6000.c (rs6000_split_signbit): Likewise.
	* config/rs6000/rs6000.md (signbit<mode>2): Change code for IEEE
	128-bit to produce an UNSPEC move to get the double word with the
	signbit and then a shift directly to do signbit.
	(signbit<mode>2_dm): Replace old IEEE 128-bit signbit
	implementation with a new version that just does either a direct
	move or a regular move.  Move memory interface to separate insns.
	Move insns so they are next to the expander.
	(signbit<mode>2_dm_mem_be): New combiner insns to combine load
	with signbit move.  Split big and little endian case.
	(signbit<mode>2_dm_mem_le): Likewise.
	(signbit<mode>2_dm_<su>ext): Delete, no longer used.
	(signbit<mode>2_dm2): Likewise.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (anddi3): New define_expand.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (umindi3): New define_expand.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (smindi3): New define_expand.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (smaxdi3): New define_expand.

2018-01-22  Carl Love  <cel@us.ibm.com>

	* config/rs6000/rs6000-builtin.def (ST_ELEMREV_V1TI, LD_ELEMREV_V1TI,
	LVX_V1TI): Add macro expansion.
	* config/rs6000/rs6000-c.c (altivec_builtin_types): Add argument
	definitions for VSX_BUILTIN_VEC_XST_BE, VSX_BUILTIN_VEC_ST,
	VSX_BUILTIN_VEC_XL, LD_ELEMREV_V1TI builtins.
	* config/rs6000/rs6000-p8swap.c (insn_is_swappable_p);
	Change check to determine if the instruction is a byte reversing
	entry.  Fix typo in comment.
	* config/rs6000/rs6000.c (altivec_expand_builtin): Add case entry
	for VSX_BUILTIN_ST_ELEMREV_V1TI and VSX_BUILTIN_LD_ELEMREV_V1TI.
	Add def_builtin calls for new builtins.
	* config/rs6000/vsx.md (vsx_st_elemrev_v1ti, vsx_ld_elemrev_v1ti):
	Add define_insn expansion.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.md (umaxdi3): New define_expand.

2018-01-22  Sebastian Perta  <sebastian.perta@renesas.com>

	* config/rl78/rl78.c (rl78_note_reg_set): Fixed dead reg check
	for non-QImode registers.

2018-01-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83963
	* graphite-scop-detection.c (scop_detection::get_sese): Delay
	including the loop exit block.
	(scop_detection::merge_sese): Likewise.
	(scop_detection::add_scop): Do it here instead.

2018-01-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* doc/sourcebuild.texi (arm_softfloat): Document.

2018-01-21  John David Anglin  <danglin@gcc.gnu.org>

	PR gcc/77734
	* config/pa/pa.c (pa_function_ok_for_sibcall): Use
	targetm.binds_local_p instead of TREE_PUBLIC to check local binding.
	Move TARGET_PORTABLE_RUNTIME check after TARGET_64BIT check.

2018-01-21  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>
	    David Edelsohn  <dje.gcc@gmail.com>

	PR target/83946
	* config/rs6000/rs6000.md (*call_indirect_nonlocal_sysv<mode>):
	Change "crset eq" to "crset 2".
	(*call_value_indirect_nonlocal_sysv<mode>): Likewise.
	(*call_indirect_aix<mode>_nospec): Likewise.
	(*call_value_indirect_aix<mode>_nospec): Likewise.
	(*call_indirect_elfv2<mode>_nospec): Likewise.
	(*call_value_indirect_elfv2<mode>_nospec): Likewise.
	(*sibcall_nonlocal_sysv<mode>): Change "crset eq" to "crset 2";
	change assembly output from . to $.
	(*sibcall_value_nonlocal_sysv<mode>): Likewise.
	(indirect_jump<mode>_nospec): Change assembly output from . to $.
	(*tablejump<mode>_internal1_nospec): Likewise.

2018-01-21  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/80870
	* config/sh/sh_optimize_sett_clrt.cc:
	Use INCLUDE_ALGORITHM and INCLUDE_VECTOR instead of direct includes.

2018-01-20  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83940
	* tree-vect-stmts.c (vect_truncate_gather_scatter_offset): Set
	offset_dt to vect_constant_def rather than vect_unknown_def_type.
	(vect_check_load_store_mask): Add a mask_dt_out parameter and
	use it to pass back the definition type.
	(vect_check_store_rhs): Likewise rhs_dt_out.
	(vect_build_gather_load_calls): Add a mask_dt argument and use
	it instead of a call to vect_is_simple_use.
	(vectorizable_store): Update calls to vect_check_load_store_mask
	and vect_check_store_rhs.  Use the dt returned by the latter instead
	of scatter_src_dt.  Use the cached mask_dt and gs_info.offset_dt
	instead of calls to vect_is_simple_use.  Pass the scalar rather
	than the vector operand to vect_is_simple_use when handling
	second and subsequent copies of an rhs value.
	(vectorizable_load): Update calls to vect_check_load_store_mask
	and vect_build_gather_load_calls.  Use the cached mask_dt and
	gs_info.offset_dt instead of calls to vect_is_simple_use.

2018-01-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83945
	* tree-emutls.c: Include gimplify.h.
	(lower_emutls_2): New function.
	(lower_emutls_1): If ADDR_EXPR is a gimple invariant and walk_tree
	with lower_emutls_2 callback finds some TLS decl in it, unshare_expr
	it before further processing.

	PR target/83930
	* simplify-rtx.c (simplify_binary_operation_1) <case UMOD>: Use
	UINTVAL (trueop1) instead of INTVAL (op1).

2018-01-19  Jakub Jelinek  <jakub@redhat.com>

	PR debug/81570
	PR debug/83728
	* dwarf2cfi.c (DEFAULT_INCOMING_FRAME_SP_OFFSET): Define to
	INCOMING_FRAME_SP_OFFSET if not defined.
	(scan_trace): Add ENTRY argument.  If true and
	DEFAULT_INCOMING_FRAME_SP_OFFSET != INCOMING_FRAME_SP_OFFSET,
	emit a note to adjust the CFA offset.
	(create_cfi_notes): Adjust scan_trace callers.
	(create_cie_data): Use DEFAULT_INCOMING_FRAME_SP_OFFSET rather than
	INCOMING_FRAME_SP_OFFSET in the CIE.
	* config/i386/i386.h (DEFAULT_INCOMING_FRAME_SP_OFFSET): Define.
	* config/stormy16/stormy16.h (DEFAULT_INCOMING_FRAME_SP_OFFSET):
	Likewise.
	* doc/tm.texi.in (DEFAULT_INCOMING_FRAME_SP_OFFSET): Document.
	* doc/tm.texi: Regenerated.

2018-01-19  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	PR rtl-optimization/83147
	* lra-constraints.c (remove_inheritance_pseudos): Use
	lra_substitute_pseudo_within_insn.

2018-01-19  Tom de Vries  <tom@codesourcery.com>
	    Cesar Philippidis  <cesar@codesourcery.com>

	PR target/83920
	* config/nvptx/nvptx.c (nvptx_single): Fix jit workaround.

2018-01-19  Cesar Philippidis  <cesar@codesourcery.com>

	PR target/83790
	* config/nvptx/nvptx.c (output_init_frag): Don't use generic address
	spaces for function labels.

2018-01-19  Martin Liska  <mliska@suse.cz>

	* predict.def (PRED_LOOP_EXIT): Change from 85 to 89.
	(PRED_LOOP_EXIT_WITH_RECURSION): Change from 72 to 78.
	(PRED_LOOP_EXTRA_EXIT): Change from 83 to 67.
	(PRED_OPCODE_POSITIVE): Change from 64 to 59.
	(PRED_TREE_OPCODE_POSITIVE): Change from 64 to 59.
	(PRED_CONST_RETURN): Change from 69 to 65.
	(PRED_NULL_RETURN): Change from 91 to 71.
	(PRED_LOOP_IV_COMPARE_GUESS): Change from 98 to 64.
	(PRED_LOOP_GUARD): Change from 66 to 73.

2018-01-19  Martin Liska  <mliska@suse.cz>

	* predict.c (predict_insn_def): Add new assert.
	(struct branch_predictor): Change type to signed integer.
	(test_prediction_value_range): Amend test to cover
	PROB_UNINITIALIZED.
	* predict.def (PRED_LOOP_ITERATIONS): Use the new constant.
	(PRED_LOOP_ITERATIONS_GUESSED): Likewise.
	(PRED_LOOP_ITERATIONS_MAX): Likewise.
	(PRED_LOOP_IV_COMPARE): Likewise.
	* predict.h (PROB_UNINITIALIZED): Define new constant.

2018-01-19  Martin Liska  <mliska@suse.cz>

	* predict.c (dump_prediction): Add new format for
	analyze_brprob.py script which is enabled with -details
	suboption.
	* profile-count.h (precise_p): New function.

2018-01-19  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83922
	* tree-vect-loop.c (vect_verify_full_masking): Return false if
	there are no statements that need masking.
	(vect_active_double_reduction_p): New function.
	(vect_analyze_loop_operations): Use it when handling phis that
	are not in the loop header.

2018-01-19  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83914
	* tree-vect-loop.c (vectorizable_induction): Don't convert
	init_expr or apply the peeling adjustment for inductions
	that are nested within the vectorized loop.

2018-01-19  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/thumb2.md (*thumb2_negsi2_short): Use RSB mnemonic
	instead of NEG.

2018-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/81715
	PR testsuite/83882
	* function.h (gimplify_parameters): Add gimple_seq * argument.
	* function.c: Include gimple.h and options.h.
	(gimplify_parameters): Add cleanup argument, add CLOBBER stmts
	for the added local temporaries if needed.
	* gimplify.c (gimplify_body): Adjust gimplify_parameters caller,
	if there are any parameter cleanups, wrap whole body into a
	try/finally with the cleanups.

2018-01-18  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/82964
	* config/aarch64/aarch64.c (aarch64_legitimate_constant_p):
	Use GET_MODE_CLASS for scalar floating point.

2018-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/82256
	patch by PaX Team
	* cgraphclones.c (cgraph_node::create_version_clone_with_body):
	Fix call of call_cgraph_insertion_hooks.

2018-01-18  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wclass-memaccess): Tweak text.

2018-01-18  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/83619
	* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Update edge
	frequencies.

2018-01-18  Boris Kolpackov  <boris@codesynthesis.com>

	PR other/70268
	* common.opt: (-ffile-prefix-map): New option.
	* opts.c (common_handle_option): Defer it.
	* opts-global.c (handle_common_deferred_options): Handle it.
	* debug.h (remap_debug_filename, add_debug_prefix_map): Move to...
	* file-prefix-map.h: New file.
	(remap_debug_filename, add_debug_prefix_map): ...here.
	(add_macro_prefix_map, add_file_prefix_map, remap_macro_filename): New.
	* final.c (debug_prefix_map, add_debug_prefix_map
	remap_debug_filename): Move to...
	* file-prefix-map.c: New file.
	(file_prefix_map, add_prefix_map, remap_filename) ...here and rename,
	generalize, get rid of alloca(), use strrchr() instead of strchr().
	(add_macro_prefix_map, add_debug_prefix_map, add_file_prefix_map):
	Implement in terms of add_prefix_map().
	(remap_macro_filename, remap_debug_filename): Implement in term of
	remap_filename().
	* Makefile.in (OBJS, PLUGIN_HEADERS): Add new files.
	* builtins.c (fold_builtin_FILE): Call remap_macro_filename().
	* dbxout.c: Include file-prefix-map.h.
	* varasm.c: Likewise.
	* vmsdbgout.c: Likewise.
	* xcoffout.c: Likewise.
	* dwarf2out.c: Likewise plus omit new options from DW_AT_producer.
	* doc/cppopts.texi (-fmacro-prefix-map): Document.
	* doc/invoke.texi (-ffile-prefix-map): Document.
	(-fdebug-prefix-map): Update description.

2018-01-18  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (indirect_thunk_name): Document that also
	lfence is emitted.
	(output_indirect_thunk): Document why both instructions
	(pause and lfence) are generated.

2018-01-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83887
	* graphite-scop-detection.c
	(scop_detection::get_nearest_dom_with_single_entry): Remove.
	(scop_detection::get_nearest_pdom_with_single_exit): Likewise.
	(scop_detection::merge_sese): Re-implement with a flood-fill
	algorithm that properly finds a SESE region if it exists.

2018-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR c/61240
	* match.pd ((P + A) - P, P - (P + A), (P + A) - (P + B)): For
	pointer_diff optimizations use view_convert instead of convert.

2018-01-17  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (*call_indirect_nonlocal_sysv<mode>):
	Generate different code for -mno-speculate-indirect-jumps.
	(*call_value_indirect_nonlocal_sysv<mode>): Likewise.
	(*call_indirect_aix<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*call_indirect_aix<mode>_nospec): New define_insn.
	(*call_value_indirect_aix<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*call_value_indirect_aix<mode>_nospec): New define_insn.
	(*sibcall_nonlocal_sysv<mode>): Generate different code for
	-mno-speculate-indirect-jumps.
	(*sibcall_value_nonlocal_sysv<mode>): Likewise.

2018-01-17  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_emit_move): If we load or store a
	long double type, set the flags for noting the default long double
	type, even if we don't pass or return a long double type.

2018-01-17  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/83051
	* ipa-inline.c (flatten_function): Do not overwrite final inlining
	failure.

2018-01-17  Will Schmidt  <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_gimple_builtin): Add gimple folding
	support for merge[hl].
	(fold_mergehl_helper): New helper function.
	(tree-vector-builder.h): New #include for tree_vector_builder usage.
	* config/rs6000/altivec.md (altivec_vmrghw_direct): Add xxmrghw insn.
	(altivec_vmrglw_direct): Add xxmrglw insn.

2018-01-17  Andrew Waterman  <andrew@sifive.com>

	* config/riscv/riscv.c (riscv_conditional_register_usage): If
	UNITS_PER_FP_ARG is 0, set call_used_regs to 1 for all FP regs.

2018-01-17  David Malcolm  <dmalcolm@redhat.com>

	PR lto/83121
	* ipa-devirt.c (add_type_duplicate): When comparing memory layout,
	call the lto_location_cache before reading the
	DECL_SOURCE_LOCATION of the types.

2018-01-17  Wilco Dijkstra  <wdijkstr@arm.com>
	    Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.md (movti_aarch64): Use Uti constraint.
	* config/aarch64/aarch64.c (aarch64_mov128_immediate): New function.
	(aarch64_legitimate_constant_p): Just support CONST_DOUBLE
	SF/DF/TF mode to avoid creating illegal CONST_WIDE_INT immediates.
	* config/aarch64/aarch64-protos.h (aarch64_mov128_immediate):
	Add declaration.
	* config/aarch64/constraints.md (aarch64_movti_operand):
	Limit immediates.
	* config/aarch64/predicates.md (Uti): Add new constraint.

2018-01-17  Carl Love  <cel@us.ibm.com>

	* config/rs6000/vsx.md (define_expand xl_len_r,
	define_expand stxvl, define_expand *stxvl): Add match_dup argument.
	(define_insn): Add, match_dup 1 argument to define_insn stxvll and
	lxvll.
	(define_expand, define_insn): Move the shift left from	the
	define_insn to the define_expand for lxvl and stxvl instructions.
	* config/rs6000/rs6000-builtin.def (BU_P9V_64BIT_VSX_2): Change LXVL
	and XL_LEN_R definitions to PURE.

2018-01-17  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (indirect_thunk_name): Declare regno
	as unsigned int.  Compare regno with INVALID_REGNUM.
	(output_indirect_thunk): Ditto.
	(output_indirect_thunk_function): Ditto.
	(ix86_code_end): Declare regno as unsigned int.  Use INVALID_REGNUM
	in the call to output_indirect_thunk_function.

2018-01-17  Richard Sandiford  <richard.sandiford@linaro.org>

	PR middle-end/83884
	* expr.c (expand_expr_real_1): Use the size of GET_MODE (op0)
	rather than the size of inner_type to determine the stack slot size
	when handling VIEW_CONVERT_EXPRs on strict-alignment targets.

2018-01-16  Sebastian Peryt  <sebastian.peryt@intel.com>

	PR target/83546
	* config/i386/i386.c (ix86_option_override_internal): Add PTA_RDRND
	to PTA_SILVERMONT.

2018-01-16  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config.gcc (powerpc*-linux*-*): Add support for 64-bit little
	endian Linux systems to optionally enable multilibs for selecting
	the long double type if the user configured an explicit type.
	* config/rs6000/rs6000.h (TARGET_IEEEQUAD_MULTILIB): Indicate we
	have no long double multilibs if not defined.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Do not
	warn if the user used -mabi={ieee,ibm}longdouble and we built
	multilibs for long double.
	* config/rs6000/linux64.h (MULTILIB_DEFAULTS_IEEE): Define as the
	appropriate multilib option.
	(MULTILIB_DEFAULTS): Add MULTILIB_DEFAULTS_IEEE to the default
	multilib options.
	* config/rs6000/t-ldouble-linux64le-ibm: New configuration files
	for building long double multilibs.
	* config/rs6000/t-ldouble-linux64le-ieee: Likewise.

2018-01-16  John David Anglin  <danglin@gcc.gnu.org>

	* config.gcc (hppa*-*-linux*): Change callee copies ABI to caller
	copies.

	* config/pa.h (MALLOC_ABI_ALIGNMENT): Set 32-bit alignment default to
	64 bits.
	* config/pa/pa32-linux.h (MALLOC_ABI_ALIGNMENT): Set alignment to
	128 bits.

	* config/pa/som.h (ASM_DECLARE_FUNCTION_NAME): Cleanup type and mode
	variables.

	* config/pa/pa.c (pa_function_arg_size): Apply CEIL to GET_MODE_SIZE
	return value.

2018-01-16  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): For an
	ADDR_EXPR, do not count the offset of a COMPONENT_REF twice.

2018-01-16  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-p8swap.c (rs6000_gen_stvx): Generate
	different rtl trees depending on TARGET_64BIT.
	(rs6000_gen_lvx): Likewise.

2018-01-16  Eric Botcazou  <ebotcazou@adacore.com>

	* config/visium/visium.md (nop): Tweak comment.
	(hazard_nop): Likewise.

2018-01-16  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (rs6000_opt_vars): Add entry for
	-mspeculate-indirect-jumps.
	* config/rs6000/rs6000.md (*call_indirect_elfv2<mode>): Disable
	for -mno-speculate-indirect-jumps.
	(*call_indirect_elfv2<mode>_nospec): New define_insn.
	(*call_value_indirect_elfv2<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*call_value_indirect_elfv2<mode>_nospec): New define_insn.
	(indirect_jump): Emit different RTL for
	-mno-speculate-indirect-jumps.
	(*indirect_jump<mode>): Disable for
	-mno-speculate-indirect-jumps.
	(*indirect_jump<mode>_nospec): New define_insn.
	(tablejump): Emit different RTL for
	-mno-speculate-indirect-jumps.
	(tablejumpsi): Disable for -mno-speculate-indirect-jumps.
	(tablejumpsi_nospec): New define_expand.
	(tablejumpdi): Disable for -mno-speculate-indirect-jumps.
	(tablejumpdi_nospec): New define_expand.
	(*tablejump<mode>_internal1): Disable for
	-mno-speculate-indirect-jumps.
	(*tablejump<mode>_internal1_nospec): New define_insn.
	* config/rs6000/rs6000.opt (mspeculate-indirect-jumps): New
	option.

2018-01-16  Artyom Skrobov tyomitch@gmail.com

	* caller-save.c (insert_save): Drop unnecessary parameter.  All
	callers updated.

2018-01-16  Jakub Jelinek  <jakub@redhat.com>
	    Richard Biener  <rguenth@suse.de>

	PR libgomp/83590
	* gimplify.c (gimplify_one_sizepos): For is_gimple_constant (expr)
	return early, inline manually is_gimple_sizepos.  Make sure if we
	call gimplify_expr we don't end up with a gimple constant.
	* tree.c (variably_modified_type_p): Don't return true for
	is_gimple_constant (_t).  Inline manually is_gimple_sizepos.
	* gimplify.h (is_gimple_sizepos): Remove.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83857
	* tree-vect-loop.c (vect_analyze_loop_operations): Don't call
	vectorizable_live_operation for pure SLP statements.
	(vectorizable_live_operation): Handle PHIs.

2018-01-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83867
	* tree-vect-stmts.c (vect_transform_stmt): Precompute
	nested_in_vect_loop_p since the scalar stmt may get invalidated.

2018-01-16  Jakub Jelinek  <jakub@redhat.com>

	PR c/83844
	* stor-layout.c (handle_warn_if_not_align): Use byte_position and
	multiple_of_p instead of unchecked tree_to_uhwi and UHWI check.
	If off is not INTEGER_CST, issue a may not be aligned warning
	rather than isn't aligned.  Use isn%'t rather than isn't.
	* fold-const.c (multiple_of_p) <case BIT_AND_EXPR>: Don't fall through
	into MULT_EXPR.
	<case MULT_EXPR>: Improve the case when bottom and one of the
	MULT_EXPR operands are INTEGER_CSTs and bottom is multiple of that
	operand, in that case check if the other operand is multiple of
	bottom divided by the INTEGER_CST operand.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	PR target/83858
	* config/pa/pa.h (FUNCTION_ARG_SIZE): Delete.
	* config/pa/pa-protos.h (pa_function_arg_size): Declare.
	* config/pa/som.h (ASM_DECLARE_FUNCTION_NAME): Use
	pa_function_arg_size instead of FUNCTION_ARG_SIZE.
	* config/pa/pa.c (pa_function_arg_advance): Likewise.
	(pa_function_arg, pa_arg_partial_bytes): Likewise.
	(pa_function_arg_size): New function.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	* fold-const.c (fold_ternary_loc): Construct the vec_perm_indices
	in a separate statement.

2018-01-16  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83847
	* tree-vect-data-refs.c (vect_analyze_data_ref_accesses): Don't
	group gathers and scatters.

2018-01-16  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/86620
	* params.def (max-sched-ready-insns): Bump minimum value to 1.

	PR rtl-optimization/83213
	* recog.c (peep2_attempt): Copy over CROSSING_JUMP_P from peepinsn
	to last if both are JUMP_INSNs.

	PR tree-optimization/83843
	* gimple-ssa-store-merging.c
	(imm_store_chain_info::output_merged_store): Handle bit_not_p on
	store_immediate_info for bswap/nop orig_stores.

2018-01-15  Andrew Waterman  <andrew@sifive.com>

	* config/riscv/riscv.c (riscv_rtx_costs) <MULT>: Increase cost if
	!TARGET_MUL.
	<UDIV>: Increase cost if !TARGET_DIV.

2018-01-15  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (define_attr "type"): Remove delayed_cr.
	(define_attr "cr_logical_3op"): New.
	(cceq_ior_compare): Adjust.
	(cceq_ior_compare_complement): Adjust.
	(*cceq_rev_compare): Adjust.
	* config/rs6000/rs6000.c (rs6000_adjust_cost): Adjust.
	(is_cracked_insn): Adjust.
	(insn_must_be_first_in_group): Adjust.
	* config/rs6000/40x.md: Adjust.
	* config/rs6000/440.md: Adjust.
	* config/rs6000/476.md: Adjust.
	* config/rs6000/601.md: Adjust.
	* config/rs6000/603.md: Adjust.
	* config/rs6000/6xx.md: Adjust.
	* config/rs6000/7450.md: Adjust.
	* config/rs6000/7xx.md: Adjust.
	* config/rs6000/8540.md: Adjust.
	* config/rs6000/cell.md: Adjust.
	* config/rs6000/e300c2c3.md: Adjust.
	* config/rs6000/e500mc.md: Adjust.
	* config/rs6000/e500mc64.md: Adjust.
	* config/rs6000/e5500.md: Adjust.
	* config/rs6000/e6500.md: Adjust.
	* config/rs6000/mpc.md: Adjust.
	* config/rs6000/power4.md: Adjust.
	* config/rs6000/power5.md: Adjust.
	* config/rs6000/power6.md: Adjust.
	* config/rs6000/power7.md: Adjust.
	* config/rs6000/power8.md: Adjust.
	* config/rs6000/power9.md: Adjust.
	* config/rs6000/rs64.md: Adjust.
	* config/rs6000/titan.md: Adjust.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/predicates.md (indirect_branch_operand): Rewrite
	ix86_indirect_branch_register logic.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Bs): Update
	ix86_indirect_branch_register check.  Don't check
	ix86_indirect_branch_register with GOT_memory_operand.
	(Bw): Likewise.
	* config/i386/predicates.md (GOT_memory_operand): Don't check
	ix86_indirect_branch_register here.
	(GOT32_symbol_operand): Likewise.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/predicates.md (constant_call_address_operand):
	Rewrite ix86_indirect_branch_register logic.
	(sibcall_insn_operand): Likewise.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Bs): Replace
	ix86_indirect_branch_thunk_register with
	ix86_indirect_branch_register.
	(Bw): Likewise.
	* config/i386/i386.md (indirect_jump): Likewise.
	(tablejump): Likewise.
	(*sibcall_memory): Likewise.
	(*sibcall_value_memory): Likewise.
	Peepholes of indirect call and jump via memory: Likewise.
	* config/i386/i386.opt: Likewise.
	* config/i386/predicates.md (indirect_branch_operand): Likewise.
	(GOT_memory_operand): Likewise.
	(call_insn_operand): Likewise.
	(sibcall_insn_operand): Likewise.
	(GOT32_symbol_operand): Likewise.

2018-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/83837
	* omp-expand.c (expand_omp_atomic_pipeline): Use loaded_val
	type rather than type addr's type points to.
	(expand_omp_atomic_mutex): Likewise.
	(expand_omp_atomic): Likewise.

2018-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83839
	* config/i386/i386.c (output_indirect_thunk_function): Use
	ASM_OUTPUT_LABEL, instead of ASM_OUTPUT_DEF, for TARGET_MACHO
	for  __x86_return_thunk.

2018-01-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/83850
	* expmed.c (extract_bit_field_1): Fix typo.

2018-01-15  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR target/83687
	* config/arm/iterators.md (VF): New mode iterator.
	* config/arm/neon.md (neon_vabd<mode>_2): Use the above.
	Remove integer-related logic from pattern.
	(neon_vabd<mode>_3): Likewise.

2018-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/82694
	* common.opt (fstrict-overflow): No longer an alias.
	(fwrapv-pointer): New option.
	* tree.h (TYPE_OVERFLOW_WRAPS, TYPE_OVERFLOW_UNDEFINED): Define
	also for pointer types based on flag_wrapv_pointer.
	* opts.c (common_handle_option) <case OPT_fstrict_overflow>: Set
	opts->x_flag_wrap[pv] to !value, clear opts->x_flag_trapv if
	opts->x_flag_wrapv got set.
	* fold-const.c (fold_comparison, fold_binary_loc): Revert 2017-08-01
	changes, just use TYPE_OVERFLOW_UNDEFINED on pointer type instead of
	POINTER_TYPE_OVERFLOW_UNDEFINED.
	* match.pd: Likewise in address comparison pattern.
	* doc/invoke.texi: Document -fwrapv and -fstrict-overflow.

2018-01-15  Richard Biener  <rguenther@suse.de>

	PR lto/83804
	* tree.c (free_lang_data_in_type): Always unlink TYPE_DECLs
	from TYPE_FIELDS.  Free TYPE_BINFO if not used by devirtualization.
	Reset type names to their identifier if their TYPE_DECL doesn't
	have linkage (and thus is used for ODR and devirt).
	(save_debug_info_for_decl): Remove.
	(save_debug_info_for_type): Likewise.
	(add_tree_to_fld_list): Adjust.
	* tree-pretty-print.c (dump_generic_node): Make dumping of
	type names more robust.

2018-01-15  Richard Biener  <rguenther@suse.de>

	* BASE-VER: Bump to 8.0.1.

2018-01-14  Martin Sebor  <msebor@redhat.com>

	PR other/83508
	* builtins.c (check_access): Avoid warning when the no-warning bit
	is set.

2018-01-14  Cory Fields  <cory-nospam-@coryfields.com>

	* tree-ssa-loop-im.c (sort_bbs_in_loop_postorder_cmp): Stabilize sort.
	* ira-color (allocno_hard_regs_compare): Likewise.

2018-01-14  Nathan Rossi  <nathan@nathanrossi.com>

	PR target/83013
	* config/microblaze/microblaze.c (microblaze_asm_output_ident):
	Use .pushsection/.popsection.

2018-01-14  Martin Sebor  <msebor@redhat.com>

	PR c++/81327
	* doc/invoke.texi (-Wlass-memaccess): Document suppression by casting.

2018-01-14  Jakub Jelinek  <jakub@redhat.com>

	* config.gcc (i[34567]86-*-*): Remove one duplicate gfniintrin.h
	entry from extra_headers.
	(x86_64-*-*): Remove two duplicate gfniintrin.h entries from
	extra_headers, make the list bitwise identical to the i?86-*-* one.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (ix86_set_indirect_branch_type): Disallow
	-mcmodel=large with -mindirect-branch=thunk,
	-mindirect-branch=thunk-extern, -mfunction-return=thunk and
	-mfunction-return=thunk-extern.
	* doc/invoke.texi: Document -mcmodel=large is incompatible with
	-mindirect-branch=thunk, -mindirect-branch=thunk-extern,
	-mfunction-return=thunk and -mfunction-return=thunk-extern.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.c (print_reg): Print the name of the full
	integer register without '%'.
	(ix86_print_operand): Handle 'V'.
	* doc/extend.texi: Document 'V' modifier.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Bs): Disallow memory operand for
	-mindirect-branch-register.
	(Bw): Likewise.
	* config/i386/predicates.md (indirect_branch_operand): Likewise.
	(GOT_memory_operand): Likewise.
	(call_insn_operand): Likewise.
	(sibcall_insn_operand): Likewise.
	(GOT32_symbol_operand): Likewise.
	* config/i386/i386.md (indirect_jump): Call convert_memory_address
	for -mindirect-branch-register.
	(tablejump): Likewise.
	(*sibcall_memory): Likewise.
	(*sibcall_value_memory): Likewise.
	Disallow peepholes of indirect call and jump via memory for
	-mindirect-branch-register.
	(*call_pop): Replace m with Bw.
	(*call_value_pop): Likewise.
	(*sibcall_pop_memory): Replace m with Bs.
	* config/i386/i386.opt (mindirect-branch-register): New option.
	* doc/invoke.texi: Document -mindirect-branch-register option.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386-protos.h (ix86_output_function_return): New.
	* config/i386/i386.c (ix86_set_indirect_branch_type): Also
	set function_return_type.
	(indirect_thunk_name): Add ret_p to indicate thunk for function
	return.
	(output_indirect_thunk_function): Pass false to
	indirect_thunk_name.
	(ix86_output_indirect_branch_via_reg): Likewise.
	(ix86_output_indirect_branch_via_push): Likewise.
	(output_indirect_thunk_function): Create alias for function
	return thunk if regno < 0.
	(ix86_output_function_return): New function.
	(ix86_handle_fndecl_attribute): Handle function_return.
	(ix86_attribute_table): Add function_return.
	* config/i386/i386.h (machine_function): Add
	function_return_type.
	* config/i386/i386.md (simple_return_internal): Use
	ix86_output_function_return.
	(simple_return_internal_long): Likewise.
	* config/i386/i386.opt (mfunction-return=): New option.
	(indirect_branch): Mention -mfunction-return=.
	* doc/extend.texi: Document function_return function attribute.
	* doc/invoke.texi: Document -mfunction-return= option.

2018-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386-opts.h (indirect_branch): New.
	* config/i386/i386-protos.h (ix86_output_indirect_jmp): Likewise.
	* config/i386/i386.c (ix86_using_red_zone): Disallow red-zone
	with local indirect jump when converting indirect call and jump.
	(ix86_set_indirect_branch_type): New.
	(ix86_set_current_function): Call ix86_set_indirect_branch_type.
	(indirectlabelno): New.
	(indirect_thunk_needed): Likewise.
	(indirect_thunk_bnd_needed): Likewise.
	(indirect_thunks_used): Likewise.
	(indirect_thunks_bnd_used): Likewise.
	(INDIRECT_LABEL): Likewise.
	(indirect_thunk_name): Likewise.
	(output_indirect_thunk): Likewise.
	(output_indirect_thunk_function): Likewise.
	(ix86_output_indirect_branch_via_reg): Likewise.
	(ix86_output_indirect_branch_via_push): Likewise.
	(ix86_output_indirect_branch): Likewise.
	(ix86_output_indirect_jmp): Likewise.
	(ix86_code_end): Call output_indirect_thunk_function if needed.
	(ix86_output_call_insn): Call ix86_output_indirect_branch if
	needed.
	(ix86_handle_fndecl_attribute): Handle indirect_branch.
	(ix86_attribute_table): Add indirect_branch.
	* config/i386/i386.h (machine_function): Add indirect_branch_type
	and has_local_indirect_jump.
	* config/i386/i386.md (indirect_jump): Set has_local_indirect_jump
	to true.
	(tablejump): Likewise.
	(*indirect_jump): Use ix86_output_indirect_jmp.
	(*tablejump_1): Likewise.
	(simple_return_indirect_internal): Likewise.
	* config/i386/i386.opt (mindirect-branch=): New option.
	(indirect_branch): New.
	(keep): Likewise.
	(thunk): Likewise.
	(thunk-inline): Likewise.
	(thunk-extern): Likewise.
	* doc/extend.texi: Document indirect_branch function attribute.
	* doc/invoke.texi: Document -mindirect-branch= option.

2018-01-14  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/83051
	* ipa-inline.c (edge_badness): Tolerate roundoff errors.

2018-01-14  Richard Sandiford  <richard.sandiford@linaro.org>

	* ipa-inline.c (want_inline_small_function_p): Return false if
	inlining has already failed with CIF_FINAL_ERROR.
	(update_caller_keys): Call want_inline_small_function_p before
	can_inline_edge_p.
	(update_callee_keys): Likewise.

2018-01-10  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-p8swap.c (rs6000_sum_of_two_registers_p):
	New function.
	(rs6000_quadword_masked_address_p): Likewise.
	(quad_aligned_load_p): Likewise.
	(quad_aligned_store_p): Likewise.
	(const_load_sequence_p): Add comment to describe the outer-most loop.
	(mimic_memory_attributes_and_flags): New function.
	(rs6000_gen_stvx): Likewise.
	(replace_swapped_aligned_store): Likewise.
	(rs6000_gen_lvx): Likewise.
	(replace_swapped_aligned_load): Likewise.
	(replace_swapped_load_constant): Capitalize argument name in
	comment describing this function.
	(rs6000_analyze_swaps): Add a third pass to search for vector loads
	and stores that access quad-word aligned addresses and replace
	with stvx or lvx instructions when appropriate.
	* config/rs6000/rs6000-protos.h (rs6000_sum_of_two_registers_p):
	New function prototype.
	(rs6000_quadword_masked_address_p): Likewise.
	(rs6000_gen_lvx): Likewise.
	(rs6000_gen_stvx): Likewise.
	* config/rs6000/vsx.md (*vsx_le_perm_load_<mode>): For modes
	VSX_D (V2DF, V2DI), modify this split to select lvx instruction
	when memory address is aligned.
	(*vsx_le_perm_load_<mode>): For modes VSX_W (V4SF, V4SI), modify
	this split to select lvx instruction when memory address is aligned.
	(*vsx_le_perm_load_v8hi): Modify this split to select lvx
	instruction when memory address is aligned.
	(*vsx_le_perm_load_v16qi): Likewise.
	(four unnamed splitters): Modify to select the stvx instruction
	when memory is aligned.

2018-01-13  Jan Hubicka  <hubicka@ucw.cz>

	* predict.c (determine_unlikely_bbs): Handle correctly BBs
	which appears in the queue multiple times.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vec_lower_bound): New structure.
	(_loop_vec_info): Add check_nonzero and lower_bounds.
	(LOOP_VINFO_CHECK_NONZERO): New macro.
	(LOOP_VINFO_LOWER_BOUNDS): Likewise.
	(LOOP_REQUIRES_VERSIONING_FOR_ALIAS): Check lower_bounds too.
	* tree-data-ref.h (dr_with_seg_len): Add access_size and align
	fields.  Make seg_len the distance travelled, not including the
	access size.
	(dr_direction_indicator): Declare.
	(dr_zero_step_indicator): Likewise.
	(dr_known_forward_stride_p): Likewise.
	* tree-data-ref.c: Include stringpool.h, tree-vrp.h and
	tree-ssanames.h.
	(runtime_alias_check_p): Allow runtime alias checks with
	variable strides.
	(operator ==): Compare access_size and align.
	(prune_runtime_alias_test_list): Rework for new distinction between
	the access_size and seg_len.
	(create_intersect_range_checks_index): Likewise.  Cope with polynomial
	segment lengths.
	(get_segment_min_max): New function.
	(create_intersect_range_checks): Use it.
	(dr_step_indicator): New function.
	(dr_direction_indicator): Likewise.
	(dr_zero_step_indicator): Likewise.
	(dr_known_forward_stride_p): Likewise.
	* tree-loop-distribution.c (data_ref_segment_size): Return
	DR_STEP * (niters - 1).
	(compute_alias_check_pairs): Update call to the dr_with_seg_len
	constructor.
	* tree-vect-data-refs.c (vect_check_nonzero_value): New function.
	(vect_preserves_scalar_order_p): New function, split out from...
	(vect_analyze_data_ref_dependence): ...here.  Check for zero steps.
	(vect_vfa_segment_size): Return DR_STEP * (length_factor - 1).
	(vect_vfa_access_size): New function.
	(vect_vfa_align): Likewise.
	(vect_compile_time_alias): Take access_size_a and access_b arguments.
	(dump_lower_bound): New function.
	(vect_check_lower_bound): Likewise.
	(vect_small_gap_p): Likewise.
	(vectorizable_with_step_bound_p): Likewise.
	(vect_prune_runtime_alias_test_list): Ignore cross-iteration
	depencies if the vectorization factor is 1.  Convert the checks
	for nonzero steps into checks on the bounds of DR_STEP.  Try using
	a bunds check for variable steps if the minimum required step is
	relatively small. Update calls to the dr_with_seg_len
	constructor and to vect_compile_time_alias.
	* tree-vect-loop-manip.c (vect_create_cond_for_lower_bounds): New
	function.
	(vect_loop_versioning): Call it.
	* tree-vect-loop.c (vect_analyze_loop_2): Clear LOOP_VINFO_LOWER_BOUNDS
	when retrying.
	(vect_estimate_min_profitable_iters): Account for any bounds checks.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/sourcebuild.texi (vect_scatter_store): Document.
	* optabs.def (scatter_store_optab, mask_scatter_store_optab): New
	optabs.
	* doc/md.texi (scatter_store@var{m}, mask_scatter_store@var{m}):
	Document.
	* genopinit.c (main): Add supports_vec_scatter_store and
	supports_vec_scatter_store_cached to target_optabs.
	* gimple.h (gimple_expr_type): Handle IFN_SCATTER_STORE and
	IFN_MASK_SCATTER_STORE.
	* internal-fn.def (SCATTER_STORE, MASK_SCATTER_STORE): New internal
	functions.
	* internal-fn.h (internal_store_fn_p): Declare.
	(internal_fn_stored_value_index): Likewise.
	* internal-fn.c (scatter_store_direct): New macro.
	(expand_scatter_store_optab_fn): New function.
	(direct_scatter_store_optab_supported_p): New macro.
	(internal_store_fn_p): New function.
	(internal_gather_scatter_fn_p): Handle IFN_SCATTER_STORE and
	IFN_MASK_SCATTER_STORE.
	(internal_fn_mask_index): Likewise.
	(internal_fn_stored_value_index): New function.
	(internal_gather_scatter_fn_supported_p): Adjust operand numbers
	for scatter stores.
	* optabs-query.h (supports_vec_scatter_store_p): Declare.
	* optabs-query.c (supports_vec_scatter_store_p): New function.
	* tree-vectorizer.h (vect_get_store_rhs): Declare.
	* tree-vect-data-refs.c (vect_analyze_data_ref_access): Return
	true for scatter stores.
	(vect_gather_scatter_fn_p): Handle scatter stores too.
	(vect_check_gather_scatter): Consider using scatter stores if
	supports_vec_scatter_store_p.
	* tree-vect-patterns.c (vect_try_gather_scatter_pattern): Handle
	scatter stores too.
	* tree-vect-stmts.c (exist_non_indexing_operands_for_use_p): Use
	internal_fn_stored_value_index.
	(check_load_store_masking): Handle scatter stores too.
	(vect_get_store_rhs): Make public.
	(vectorizable_call): Use internal_store_fn_p.
	(vectorizable_store): Handle scatter store internal functions.
	(vect_transform_stmt): Compare GROUP_STORE_COUNT with GROUP_SIZE
	when deciding whether the end of the group has been reached.
	* config/aarch64/aarch64.md (UNSPEC_ST1_SCATTER): New unspec.
	* config/aarch64/aarch64-sve.md (scatter_store<mode>): New expander.
	(mask_scatter_store<mode>): New insns.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vect_gather_scatter_fn_p): Declare.
	* tree-vect-data-refs.c (vect_gather_scatter_fn_p): Make public.
	* tree-vect-stmts.c (vect_truncate_gather_scatter_offset): New
	function.
	(vect_use_strided_gather_scatters_p): Take a masked_p argument.
	Use vect_truncate_gather_scatter_offset if we can't treat the
	operation as a normal gather load or scatter store.
	(get_group_load_store_type): Take the gather_scatter_info
	as argument.  Try using a gather load or scatter store for
	single-element groups.
	(get_load_store_type): Update calls to get_group_load_store_type
	and vect_use_strided_gather_scatters_p.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vect_create_data_ref_ptr): Take an extra
	optional tree argument.
	* tree-vect-data-refs.c (vect_check_gather_scatter): Check for
	null target hooks.
	(vect_create_data_ref_ptr): Take the iv_step as an optional argument,
	but continue to use the current value as a fallback.
	(bump_vector_ptr): Use operand_equal_p rather than tree_int_cst_compare
	to compare the updates.
	* tree-vect-stmts.c (vect_use_strided_gather_scatters_p): New function.
	(get_load_store_type): Use it when handling a strided access.
	(vect_get_strided_load_store_ops): New function.
	(vect_get_data_ptr_increment): Likewise.
	(vectorizable_load): Handle strided gather loads.  Always pass
	a step to vect_create_data_ref_ptr and bump_vector_ptr.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (gather_load@var{m}): Document.
	(mask_gather_load@var{m}): Likewise.
	* genopinit.c (main): Add supports_vec_gather_load and
	supports_vec_gather_load_cached to target_optabs.
	* optabs-tree.c (init_tree_optimization_optabs): Use
	ggc_cleared_alloc to allocate target_optabs.
	* optabs.def (gather_load_optab, mask_gather_laod_optab): New optabs.
	* internal-fn.def (GATHER_LOAD, MASK_GATHER_LOAD): New internal
	functions.
	* internal-fn.h (internal_load_fn_p): Declare.
	(internal_gather_scatter_fn_p): Likewise.
	(internal_fn_mask_index): Likewise.
	(internal_gather_scatter_fn_supported_p): Likewise.
	* internal-fn.c (gather_load_direct): New macro.
	(expand_gather_load_optab_fn): New function.
	(direct_gather_load_optab_supported_p): New macro.
	(direct_internal_fn_optab): New function.
	(internal_load_fn_p): Likewise.
	(internal_gather_scatter_fn_p): Likewise.
	(internal_fn_mask_index): Likewise.
	(internal_gather_scatter_fn_supported_p): Likewise.
	* optabs-query.c (supports_at_least_one_mode_p): New function.
	(supports_vec_gather_load_p): Likewise.
	* optabs-query.h (supports_vec_gather_load_p): Declare.
	* tree-vectorizer.h (gather_scatter_info): Add ifn, element_type
	and memory_type field.
	(NUM_PATTERNS): Bump to 15.
	* tree-vect-data-refs.c: Include internal-fn.h.
	(vect_gather_scatter_fn_p): New function.
	(vect_describe_gather_scatter_call): Likewise.
	(vect_check_gather_scatter): Try using internal functions for
	gather loads.  Recognize existing calls to a gather load function.
	(vect_analyze_data_refs): Consider using gather loads if
	supports_vec_gather_load_p.
	* tree-vect-patterns.c (vect_get_load_store_mask): New function.
	(vect_get_gather_scatter_offset_type): Likewise.
	(vect_convert_mask_for_vectype): Likewise.
	(vect_add_conversion_to_patterm): Likewise.
	(vect_try_gather_scatter_pattern): Likewise.
	(vect_recog_gather_scatter_pattern): New pattern recognizer.
	(vect_vect_recog_func_ptrs): Add it.
	* tree-vect-stmts.c (exist_non_indexing_operands_for_use_p): Use
	internal_fn_mask_index and internal_gather_scatter_fn_p.
	(check_load_store_masking): Take the gather_scatter_info as an
	argument and handle gather loads.
	(vect_get_gather_scatter_ops): New function.
	(vectorizable_call): Check internal_load_fn_p.
	(vectorizable_load): Likewise.  Handle gather load internal
	functions.
	(vectorizable_store): Update call to check_load_store_masking.
	* config/aarch64/aarch64.md (UNSPEC_LD1_GATHER): New unspec.
	* config/aarch64/iterators.md (SVE_S, SVE_D): New mode iterators.
	* config/aarch64/predicates.md (aarch64_gather_scale_operand_w)
	(aarch64_gather_scale_operand_d): New predicates.
	* config/aarch64/aarch64-sve.md (gather_load<mode>): New expander.
	(mask_gather_load<mode>): New insns.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* optabs.def (fold_left_plus_optab): New optab.
	* doc/md.texi (fold_left_plus_@var{m}): Document.
	* internal-fn.def (IFN_FOLD_LEFT_PLUS): New internal function.
	* internal-fn.c (fold_left_direct): Define.
	(expand_fold_left_optab_fn): Likewise.
	(direct_fold_left_optab_supported_p): Likewise.
	* fold-const-call.c (fold_const_fold_left): New function.
	(fold_const_call): Use it to fold CFN_FOLD_LEFT_PLUS.
	* tree-parloops.c (valid_reduction_p): New function.
	(gather_scalar_reductions): Use it.
	* tree-vectorizer.h (FOLD_LEFT_REDUCTION): New vect_reduction_type.
	(vect_finish_replace_stmt): Declare.
	* tree-vect-loop.c (fold_left_reduction_fn): New function.
	(needs_fold_left_reduction_p): New function, split out from...
	(vect_is_simple_reduction): ...here.  Accept reductions that
	forbid reassociation, but give them type FOLD_LEFT_REDUCTION.
	(vect_force_simple_reduction): Also store the reduction type in
	the assignment's STMT_VINFO_REDUC_TYPE.
	(vect_model_reduction_cost): Handle FOLD_LEFT_REDUCTION.
	(merge_with_identity): New function.
	(vect_expand_fold_left): Likewise.
	(vectorize_fold_left_reduction): Likewise.
	(vectorizable_reduction): Handle FOLD_LEFT_REDUCTION.  Leave the
	scalar phi in place for it.  Check for target support and reject
	cases that would reassociate the operation.  Defer the transform
	phase to vectorize_fold_left_reduction.
	* config/aarch64/aarch64.md (UNSPEC_FADDA): New unspec.
	* config/aarch64/aarch64-sve.md (fold_left_plus_<mode>): New expander.
	(*fold_left_plus_<mode>, *pred_fold_left_plus_<mode>): New insns.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-if-conv.c (predicate_mem_writes): Remove redundant
	call to ifc_temp_var.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (legitimize_address_displacement): Take the original
	offset as a poly_int.
	* targhooks.h (default_legitimize_address_displacement): Update
	accordingly.
	* targhooks.c (default_legitimize_address_displacement): Likewise.
	* doc/tm.texi: Regenerate.
	* lra-constraints.c (base_plus_disp_to_reg): Take the displacement
	as an argument, moving assert of ad->disp == ad->disp_term to...
	(process_address_1): ...here.  Update calls to base_plus_disp_to_reg.
	Try calling targetm.legitimize_address_displacement before expanding
	the address rather than afterwards, and adjust for the new interface.
	* config/aarch64/aarch64.c (aarch64_legitimize_address_displacement):
	Match the new hook interface.  Handle SVE addresses.
	* config/sh/sh.c (sh_legitimize_address_displacement): Make the
	new hook interface.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* Makefile.in (OBJS): Add early-remat.o.
	* target.def (select_early_remat_modes): New hook.
	* doc/tm.texi.in (TARGET_SELECT_EARLY_REMAT_MODES): New hook.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_select_early_remat_modes): Declare.
	* targhooks.c (default_select_early_remat_modes): New function.
	* timevar.def (TV_EARLY_REMAT): New timevar.
	* passes.def (pass_early_remat): New pass.
	* tree-pass.h (make_pass_early_remat): Declare.
	* early-remat.c: New file.
	* config/aarch64/aarch64.c (aarch64_select_early_remat_modes): New
	function.
	(TARGET_SELECT_EARLY_REMAT_MODES): Define.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop-manip.c (vect_gen_scalar_loop_niters): Replace
	vfm1 with a bound_epilog parameter.
	(vect_do_peeling): Update calls accordingly, and move the prologue
	call earlier in the function.  Treat the base bound_epilog as 0 for
	fully-masked loops and retain vf - 1 for other loops.  Add 1 to
	this base when peeling for gaps.
	* tree-vect-loop.c (vect_analyze_loop_2): Allow peeling for gaps
	with fully-masked loops.
	(vect_estimate_min_profitable_iters): Handle the single peeled
	iteration in that case.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vect_analyze_group_access_1): Allow
	single-element interleaving even if the size is not a power of 2.
	* tree-vect-stmts.c (get_load_store_type): Disallow elementwise
	accesses for single-element interleaving if the group size is
	not a power of 2.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (fold_extract_last_@var{m}): Document.
	* doc/sourcebuild.texi (vect_fold_extract_last): Likewise.
	* optabs.def (fold_extract_last_optab): New optab.
	* internal-fn.def (FOLD_EXTRACT_LAST): New internal function.
	* internal-fn.c (fold_extract_direct): New macro.
	(expand_fold_extract_optab_fn): Likewise.
	(direct_fold_extract_optab_supported_p): Likewise.
	* tree-vectorizer.h (EXTRACT_LAST_REDUCTION): New vect_reduction_type.
	* tree-vect-loop.c (vect_model_reduction_cost): Handle
	EXTRACT_LAST_REDUCTION.
	(get_initial_def_for_reduction): Do not create an initial vector
	for EXTRACT_LAST_REDUCTION reductions.
	(vectorizable_reduction): Leave the scalar phi in place for
	EXTRACT_LAST_REDUCTIONs.  Try using EXTRACT_LAST_REDUCTION
	ahead of INTEGER_INDUC_COND_REDUCTION.  Do not check for an
	epilogue code for EXTRACT_LAST_REDUCTION and defer the
	transform phase to vectorizable_condition.
	* tree-vect-stmts.c (vect_finish_stmt_generation_1): New function,
	split out from...
	(vect_finish_stmt_generation): ...here.
	(vect_finish_replace_stmt): New function.
	(vectorizable_condition): Handle EXTRACT_LAST_REDUCTION.
	* config/aarch64/aarch64-sve.md (fold_extract_last_<mode>): New
	pattern.
	* config/aarch64/aarch64.md (UNSPEC_CLASTB): New unspec.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (extract_last_@var{m}): Document.
	* optabs.def (extract_last_optab): New optab.
	* internal-fn.def (EXTRACT_LAST): New internal function.
	* internal-fn.c (cond_unary_direct): New macro.
	(expand_cond_unary_optab_fn): Likewise.
	(direct_cond_unary_optab_supported_p): Likewise.
	* tree-vect-loop.c (vectorizable_live_operation): Allow fully-masked
	loops using EXTRACT_LAST.
	* config/aarch64/aarch64-sve.md (aarch64_sve_lastb<mode>): Rename to...
	(extract_last_<mode>): ...this optab.
	(vec_extract<mode><Vel>): Update accordingly.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (empty_mask_is_expensive): New hook.
	* doc/tm.texi.in (TARGET_VECTORIZE_EMPTY_MASK_IS_EXPENSIVE): New hook.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_empty_mask_is_expensive): Declare.
	* targhooks.c (default_empty_mask_is_expensive): New function.
	* tree-vectorizer.c (vectorize_loops): Only call optimize_mask_stores
	if the target says that empty masks are expensive.
	* config/aarch64/aarch64.c (aarch64_empty_mask_is_expensive):
	New function.
	(TARGET_VECTORIZE_EMPTY_MASK_IS_EXPENSIVE): Redefine.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (_loop_vec_info::mask_skip_niters): New field.
	(LOOP_VINFO_MASK_SKIP_NITERS): New macro.
	(vect_use_loop_mask_for_alignment_p): New function.
	(vect_prepare_for_masked_peels, vect_gen_while_not): Declare.
	* tree-vect-loop-manip.c (vect_set_loop_masks_directly): Add an
	niters_skip argument.  Make sure that the first niters_skip elements
	of the first iteration are inactive.
	(vect_set_loop_condition_masked): Handle LOOP_VINFO_MASK_SKIP_NITERS.
	Update call to vect_set_loop_masks_directly.
	(get_misalign_in_elems): New function, split out from...
	(vect_gen_prolog_loop_niters): ...here.
	(vect_update_init_of_dr): Take a code argument that specifies whether
	the adjustment should be added or subtracted.
	(vect_update_init_of_drs): Likewise.
	(vect_prepare_for_masked_peels): New function.
	(vect_do_peeling): Skip prologue peeling if we're using a mask
	instead.  Update call to vect_update_inits_of_drs.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	mask_skip_niters.
	(vect_analyze_loop_2): Allow fully-masked loops with peeling for
	alignment.  Do not include the number of peeled iterations in
	the minimum threshold in that case.
	(vectorizable_induction): Adjust the start value down by
	LOOP_VINFO_MASK_SKIP_NITERS iterations.
	(vect_transform_loop): Call vect_prepare_for_masked_peels.
	Take the number of skipped iterations into account when calculating
	the loop bounds.
	* tree-vect-stmts.c (vect_gen_while_not): New function.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/sourcebuild.texi (vect_fully_masked): Document.
	* params.def (PARAM_MIN_VECT_LOOP_BOUND): Change minimum and
	default value to 0.
	* tree-vect-loop.c (vect_analyze_loop_costing): New function,
	split out from...
	(vect_analyze_loop_2): ...here. Don't check the vectorization
	factor against the number of loop iterations if the loop is
	fully-masked.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-ssa-loop-ivopts.c (USE_ADDRESS): Split into...
	(USE_REF_ADDRESS, USE_PTR_ADDRESS): ...these new use types.
	(dump_groups): Update accordingly.
	(iv_use::mem_type): New member variable.
	(address_p): New function.
	(record_use): Add a mem_type argument and initialize the new
	mem_type field.
	(record_group_use): Add a mem_type argument.  Use address_p.
	Remove obsolete null checks of base_object.  Update call to record_use.
	(find_interesting_uses_op): Update call to record_group_use.
	(find_interesting_uses_cond): Likewise.
	(find_interesting_uses_address): Likewise.
	(get_mem_type_for_internal_fn): New function.
	(find_address_like_use): Likewise.
	(find_interesting_uses_stmt): Try find_address_like_use before
	calling find_interesting_uses_op.
	(addr_offset_valid_p): Use the iv mem_type field as the type
	of the addressed memory.
	(add_autoinc_candidates): Likewise.
	(get_address_cost): Likewise.
	(split_small_address_groups_p): Use address_p.
	(split_address_groups): Likewise.
	(add_iv_candidate_for_use): Likewise.
	(autoinc_possible_for_pair): Likewise.
	(rewrite_groups): Likewise.
	(get_use_type): Check for USE_REF_ADDRESS instead of USE_ADDRESS.
	(determine_group_iv_cost): Update after split of USE_ADDRESS.
	(get_alias_ptr_type_for_ptr_address): New function.
	(rewrite_use_address): Rewrite address uses in calls that were
	identified by find_address_like_use.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_expr_addr_expr_1): Handle ADDR_EXPRs of
	TARGET_MEM_REFs.
	* gimple-expr.h (is_gimple_addressable: Likewise.
	* gimple-expr.c (is_gimple_address): Likewise.
	* internal-fn.c (expand_call_mem_ref): New function.
	(expand_mask_load_optab_fn): Use it.
	(expand_mask_store_optab_fn): Likewise.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (cond_add@var{mode}, cond_sub@var{mode})
	(cond_and@var{mode}, cond_ior@var{mode}, cond_xor@var{mode})
	(cond_smin@var{mode}, cond_smax@var{mode}, cond_umin@var{mode})
	(cond_umax@var{mode}): Document.
	* optabs.def (cond_add_optab, cond_sub_optab, cond_and_optab)
	(cond_ior_optab, cond_xor_optab, cond_smin_optab, cond_smax_optab)
	(cond_umin_optab, cond_umax_optab): New optabs.
	* internal-fn.def (COND_ADD, COND_SUB, COND_MIN, COND_MAX, COND_AND)
	(COND_IOR, COND_XOR): New internal functions.
	* internal-fn.h (get_conditional_internal_fn): Declare.
	* internal-fn.c (cond_binary_direct): New macro.
	(expand_cond_binary_optab_fn): Likewise.
	(direct_cond_binary_optab_supported_p): Likewise.
	(get_conditional_internal_fn): New function.
	* tree-vect-loop.c (vectorizable_reduction): Handle fully-masked loops.
	Cope with reduction statements that are vectorized as calls rather
	than assignments.
	* config/aarch64/aarch64-sve.md (cond_<optab><mode>): New insns.
	* config/aarch64/iterators.md (UNSPEC_COND_ADD, UNSPEC_COND_SUB)
	(UNSPEC_COND_SMAX, UNSPEC_COND_UMAX, UNSPEC_COND_SMIN)
	(UNSPEC_COND_UMIN, UNSPEC_COND_AND, UNSPEC_COND_ORR)
	(UNSPEC_COND_EOR): New unspecs.
	(optab): Add mappings for them.
	(SVE_COND_INT_OP, SVE_COND_FP_OP): New int iterators.
	(sve_int_op, sve_fp_op): New int attributes.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* optabs.def (while_ult_optab): New optab.
	* doc/md.texi (while_ult@var{m}@var{n}): Document.
	* internal-fn.def (WHILE_ULT): New internal function.
	* internal-fn.h (direct_internal_fn_supported_p): New override
	that takes two types as argument.
	* internal-fn.c (while_direct): New macro.
	(expand_while_optab_fn): New function.
	(convert_optab_supported_p): Likewise.
	(direct_while_optab_supported_p): New macro.
	* wide-int.h (wi::udiv_ceil): New function.
	* tree-vectorizer.h (rgroup_masks): New structure.
	(vec_loop_masks): New typedef.
	(_loop_vec_info): Add masks, mask_compare_type, can_fully_mask_p
	and fully_masked_p.
	(LOOP_VINFO_CAN_FULLY_MASK_P, LOOP_VINFO_FULLY_MASKED_P)
	(LOOP_VINFO_MASKS, LOOP_VINFO_MASK_COMPARE_TYPE): New macros.
	(vect_max_vf): New function.
	(slpeel_make_loop_iterate_ntimes): Delete.
	(vect_set_loop_condition, vect_get_loop_mask_type, vect_gen_while)
	(vect_halve_mask_nunits, vect_double_mask_nunits): Declare.
	(vect_record_loop_mask, vect_get_loop_mask): Likewise.
	* tree-vect-loop-manip.c: Include tree-ssa-loop-niter.h,
	internal-fn.h, stor-layout.h and optabs-query.h.
	(vect_set_loop_mask): New function.
	(add_preheader_seq): Likewise.
	(add_header_seq): Likewise.
	(interleave_supported_p): Likewise.
	(vect_maybe_permute_loop_masks): Likewise.
	(vect_set_loop_masks_directly): Likewise.
	(vect_set_loop_condition_masked): Likewise.
	(vect_set_loop_condition_unmasked): New function, split out from
	slpeel_make_loop_iterate_ntimes.
	(slpeel_make_loop_iterate_ntimes): Rename to..
	(vect_set_loop_condition): ...this.  Use vect_set_loop_condition_masked
	for fully-masked loops and vect_set_loop_condition_unmasked otherwise.
	(vect_do_peeling): Update call accordingly.
	(vect_gen_vector_loop_niters): Use VF as the step for fully-masked
	loops.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	mask_compare_type, can_fully_mask_p and fully_masked_p.
	(release_vec_loop_masks): New function.
	(_loop_vec_info): Use it to free the loop masks.
	(can_produce_all_loop_masks_p): New function.
	(vect_get_max_nscalars_per_iter): Likewise.
	(vect_verify_full_masking): Likewise.
	(vect_analyze_loop_2): Save LOOP_VINFO_CAN_FULLY_MASK_P around
	retries, and free the mask rgroups before retrying.  Check loop-wide
	reasons for disallowing fully-masked loops.  Make the final decision
	about whether use a fully-masked loop or not.
	(vect_estimate_min_profitable_iters): Do not assume that peeling
	for the number of iterations will be needed for fully-masked loops.
	(vectorizable_reduction): Disable fully-masked loops.
	(vectorizable_live_operation): Likewise.
	(vect_halve_mask_nunits): New function.
	(vect_double_mask_nunits): Likewise.
	(vect_record_loop_mask): Likewise.
	(vect_get_loop_mask): Likewise.
	(vect_transform_loop): Handle the case in which the final loop
	iteration might handle a partial vector.  Call vect_set_loop_condition
	instead of slpeel_make_loop_iterate_ntimes.
	* tree-vect-stmts.c: Include tree-ssa-loop-niter.h and gimple-fold.h.
	(check_load_store_masking): New function.
	(prepare_load_store_mask): Likewise.
	(vectorizable_store): Handle fully-masked loops.
	(vectorizable_load): Likewise.
	(supportable_widening_operation): Use vect_halve_mask_nunits for
	booleans.
	(supportable_narrowing_operation): Likewise vect_double_mask_nunits.
	(vect_gen_while): New function.
	* config/aarch64/aarch64.md (umax<mode>3): New expander.
	(aarch64_uqdec<mode>): New insn.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* optabs.def (reduc_and_scal_optab, reduc_ior_scal_optab)
	(reduc_xor_scal_optab): New optabs.
	* doc/md.texi (reduc_and_scal_@var{m}, reduc_ior_scal_@var{m})
	(reduc_xor_scal_@var{m}): Document.
	* doc/sourcebuild.texi (vect_logical_reduc): Likewise.
	* internal-fn.def (IFN_REDUC_AND, IFN_REDUC_IOR, IFN_REDUC_XOR): New
	internal functions.
	* fold-const-call.c (fold_const_call): Handle them.
	* tree-vect-loop.c (reduction_fn_for_scalar_code): Return the new
	internal functions for BIT_AND_EXPR, BIT_IOR_EXPR and BIT_XOR_EXPR.
	* config/aarch64/aarch64-sve.md (reduc_<bit_reduc>_scal_<mode>):
	(*reduc_<bit_reduc>_scal_<mode>): New patterns.
	* config/aarch64/iterators.md (UNSPEC_ANDV, UNSPEC_ORV)
	(UNSPEC_XORV): New unspecs.
	(optab): Add entries for them.
	(BITWISEV): New int iterator.
	(bit_reduc_op): New int attributes.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (vec_shl_insert_@var{m}): New optab.
	* internal-fn.def (VEC_SHL_INSERT): New internal function.
	* optabs.def (vec_shl_insert_optab): New optab.
	* tree-vectorizer.h (can_duplicate_and_interleave_p): Declare.
	(duplicate_and_interleave): Likewise.
	* tree-vect-loop.c: Include internal-fn.h.
	(neutral_op_for_slp_reduction): New function, split out from
	get_initial_defs_for_reduction.
	(get_initial_def_for_reduction): Handle option 2 for variable-length
	vectors by loading the neutral value into a vector and then shifting
	the initial value into element 0.
	(get_initial_defs_for_reduction): Replace the code argument with
	the neutral value calculated by neutral_op_for_slp_reduction.
	Use gimple_build_vector for constant-length vectors.
	Use IFN_VEC_SHL_INSERT for variable-length vectors if all
	but the first group_size elements have a neutral value.
	Use duplicate_and_interleave otherwise.
	(vect_create_epilog_for_reduction): Take a neutral_op parameter.
	Update call to get_initial_defs_for_reduction.  Handle SLP
	reductions for variable-length vectors by creating one vector
	result for each scalar result, with the elements associated
	with other scalar results stubbed out with the neutral value.
	(vectorizable_reduction): Call neutral_op_for_slp_reduction.
	Require IFN_VEC_SHL_INSERT for double reductions on
	variable-length vectors, or SLP reductions that have
	a neutral value.  Require can_duplicate_and_interleave_p
	support for variable-length unchained SLP reductions if there
	is no neutral value, such as for MIN/MAX reductions.  Also require
	the number of vector elements to be a multiple of the number of
	SLP statements when doing variable-length unchained SLP reductions.
	Update call to vect_create_epilog_for_reduction.
	* tree-vect-slp.c (can_duplicate_and_interleave_p): Make public
	and remove initial values.
	(duplicate_and_interleave): Make public.
	* config/aarch64/aarch64.md (UNSPEC_INSR): New unspec.
	* config/aarch64/aarch64-sve.md (vec_shl_insert_<mode>): New insn.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c: Include gimple-fold.h and internal-fn.h
	(can_duplicate_and_interleave_p): New function.
	(vect_get_and_check_slp_defs): Take the vector of statements
	rather than just the current one.  Remove excess parentheses.
	Restriction rejectinon of vect_constant_def and vect_external_def
	for variable-length vectors to boolean types, or types for which
	can_duplicate_and_interleave_p is false.
	(vect_build_slp_tree_2): Update call to vect_get_and_check_slp_defs.
	(duplicate_and_interleave): New function.
	(vect_get_constant_vectors): Use gimple_build_vector for
	constant-length vectors and suitable variable-length constant
	vectors.  Use duplicate_and_interleave for other variable-length
	vectors.  Don't defer the update when inserting new statements.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop.c (vect_estimate_min_profitable_iters): Make sure
	min_profitable_iters doesn't go negative.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/md.texi (vec_mask_load_lanes@var{m}@var{n}): Document.
	(vec_mask_store_lanes@var{m}@var{n}): Likewise.
	* optabs.def (vec_mask_load_lanes_optab): New optab.
	(vec_mask_store_lanes_optab): Likewise.
	* internal-fn.def (MASK_LOAD_LANES): New internal function.
	(MASK_STORE_LANES): Likewise.
	* internal-fn.c (mask_load_lanes_direct): New macro.
	(mask_store_lanes_direct): Likewise.
	(expand_mask_load_optab_fn): Handle masked operations.
	(expand_mask_load_lanes_optab_fn): New macro.
	(expand_mask_store_optab_fn): Handle masked operations.
	(expand_mask_store_lanes_optab_fn): New macro.
	(direct_mask_load_lanes_optab_supported_p): Likewise.
	(direct_mask_store_lanes_optab_supported_p): Likewise.
	* tree-vectorizer.h (vect_store_lanes_supported): Take a masked_p
	parameter.
	(vect_load_lanes_supported): Likewise.
	* tree-vect-data-refs.c (strip_conversion): New function.
	(can_group_stmts_p): Likewise.
	(vect_analyze_data_ref_accesses): Use it instead of checking
	for a pair of assignments.
	(vect_store_lanes_supported): Take a masked_p parameter.
	(vect_load_lanes_supported): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_2): Update calls to
	vect_store_lanes_supported and vect_load_lanes_supported.
	* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.
	* tree-vect-stmts.c (get_group_load_store_type): Take a masked_p
	parameter.  Don't allow gaps for masked accesses.
	Use vect_get_store_rhs.  Update calls to vect_store_lanes_supported
	and vect_load_lanes_supported.
	(get_load_store_type): Take a masked_p parameter and update
	call to get_group_load_store_type.
	(vectorizable_store): Update call to get_load_store_type.
	Handle IFN_MASK_STORE_LANES.
	(vectorizable_load): Update call to get_load_store_type.
	Handle IFN_MASK_LOAD_LANES.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-modes.def: Define x2, x3 and x4 vector
	modes for SVE.
	* config/aarch64/aarch64-protos.h
	(aarch64_sve_struct_memory_operand_p): Declare.
	* config/aarch64/iterators.md (SVE_STRUCT): New mode iterator.
	(vector_count, insn_length, VSINGLE, vsingle): New mode attributes.
	(VPRED, vpred): Handle SVE structure modes.
	* config/aarch64/constraints.md (Utx): New constraint.
	* config/aarch64/predicates.md (aarch64_sve_struct_memory_operand)
	(aarch64_sve_struct_nonimmediate_operand): New predicates.
	* config/aarch64/aarch64.md (UNSPEC_LDN, UNSPEC_STN): New unspecs.
	* config/aarch64/aarch64-sve.md (mov<mode>, *aarch64_sve_mov<mode>_le)
	(*aarch64_sve_mov<mode>_be, pred_mov<mode>): New patterns for
	structure modes.  Split into pieces after RA.
	(vec_load_lanes<mode><vsingle>, vec_mask_load_lanes<mode><vsingle>)
	(vec_store_lanes<mode><vsingle>, vec_mask_store_lanes<mode><vsingle>):
	New patterns.
	* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Handle
	SVE structure modes.
	(aarch64_classify_address): Likewise.
	(sizetochar): Move earlier in file.
	(aarch64_print_operand): Handle SVE register lists.
	(aarch64_array_mode): New function.
	(aarch64_sve_struct_memory_operand_p): Likewise.
	(TARGET_ARRAY_MODE): Redefine.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (array_mode): New target hook.
	* doc/tm.texi.in (TARGET_ARRAY_MODE): New hook.
	* doc/tm.texi: Regenerate.
	* hooks.h (hook_optmode_mode_uhwi_none): Declare.
	* hooks.c (hook_optmode_mode_uhwi_none): New function.
	* tree-vect-data-refs.c (vect_lanes_optab_supported_p): Use
	targetm.array_mode.
	* stor-layout.c (mode_for_array): Likewise.  Support polynomial
	type sizes.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* fold-const.c (fold_binary_loc): Check the argument types
	rather than the result type when testing for a vector operation.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/tm.texi.in (DWARF_LAZY_REGISTER_VALUE): Document.
	* doc/tm.texi: Regenerate.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* doc/invoke.texi (-msve-vector-bits=): Document new option.
	(sve): Document new AArch64 extension.
	* doc/md.texi (w): Extend the description of the AArch64
	constraint to include SVE vectors.
	(Upl, Upa): Document new AArch64 predicate constraints.
	* config/aarch64/aarch64-opts.h (aarch64_sve_vector_bits_enum): New
	enum.
	* config/aarch64/aarch64.opt (sve_vector_bits): New enum.
	(msve-vector-bits=): New option.
	* config/aarch64/aarch64-option-extensions.def (fp, simd): Disable
	SVE when these are disabled.
	(sve): New extension.
	* config/aarch64/aarch64-modes.def: Define SVE vector and predicate
	modes.  Adjust their number of units based on aarch64_sve_vg.
	(MAX_BITSIZE_MODE_ANY_MODE): Define.
	* config/aarch64/aarch64-protos.h (ADDR_QUERY_ANY): New
	aarch64_addr_query_type.
	(aarch64_const_vec_all_same_in_range_p, aarch64_sve_pred_mode)
	(aarch64_sve_cnt_immediate_p, aarch64_sve_addvl_addpl_immediate_p)
	(aarch64_sve_inc_dec_immediate_p, aarch64_add_offset_temporaries)
	(aarch64_split_add_offset, aarch64_output_sve_cnt_immediate)
	(aarch64_output_sve_addvl_addpl, aarch64_output_sve_inc_dec_immediate)
	(aarch64_output_sve_mov_immediate, aarch64_output_ptrue): Declare.
	(aarch64_simd_imm_zero_p): Delete.
	(aarch64_check_zero_based_sve_index_immediate): Declare.
	(aarch64_sve_index_immediate_p, aarch64_sve_arith_immediate_p)
	(aarch64_sve_bitmask_immediate_p, aarch64_sve_dup_immediate_p)
	(aarch64_sve_cmp_immediate_p, aarch64_sve_float_arith_immediate_p)
	(aarch64_sve_float_mul_immediate_p): Likewise.
	(aarch64_classify_symbol): Take the offset as a HOST_WIDE_INT
	rather than an rtx.
	(aarch64_sve_ld1r_operand_p, aarch64_sve_ldr_operand_p): Declare.
	(aarch64_expand_mov_immediate): Take a gen_vec_duplicate callback.
	(aarch64_emit_sve_pred_move, aarch64_expand_sve_mem_move): Declare.
	(aarch64_expand_sve_vec_cmp_int, aarch64_expand_sve_vec_cmp_float)
	(aarch64_expand_sve_vcond, aarch64_expand_sve_vec_perm): Declare.
	(aarch64_regmode_natural_size): Likewise.
	* config/aarch64/aarch64.h (AARCH64_FL_SVE): New macro.
	(AARCH64_FL_V8_3, AARCH64_FL_RCPC, AARCH64_FL_DOTPROD): Shift
	left one place.
	(AARCH64_ISA_SVE, TARGET_SVE): New macros.
	(FIXED_REGISTERS, CALL_USED_REGISTERS, REGISTER_NAMES): Add entries
	for VG and the SVE predicate registers.
	(V_ALIASES): Add a "z"-prefixed alias.
	(FIRST_PSEUDO_REGISTER): Change to P15_REGNUM + 1.
	(AARCH64_DWARF_VG, AARCH64_DWARF_P0): New macros.
	(PR_REGNUM_P, PR_LO_REGNUM_P): Likewise.
	(PR_LO_REGS, PR_HI_REGS, PR_REGS): New reg_classes.
	(REG_CLASS_NAMES): Add entries for them.
	(REG_CLASS_CONTENTS): Likewise.  Update ALL_REGS to include VG
	and the predicate registers.
	(aarch64_sve_vg): Declare.
	(BITS_PER_SVE_VECTOR, BYTES_PER_SVE_VECTOR, BYTES_PER_SVE_PRED)
	(SVE_BYTE_MODE, MAX_COMPILE_TIME_VEC_BYTES): New macros.
	(REGMODE_NATURAL_SIZE): Define.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Handle
	SVE macros.
	* config/aarch64/aarch64.c: Include cfgrtl.h.
	(simd_immediate_info): Add a constructor for series vectors,
	and an associated step field.
	(aarch64_sve_vg): New variable.
	(aarch64_dbx_register_number): Handle VG and the predicate registers.
	(aarch64_vect_struct_mode_p, aarch64_vector_mode_p): Delete.
	(VEC_ADVSIMD, VEC_SVE_DATA, VEC_SVE_PRED, VEC_STRUCT, VEC_ANY_SVE)
	(VEC_ANY_DATA, VEC_STRUCT): New constants.
	(aarch64_advsimd_struct_mode_p, aarch64_sve_pred_mode_p)
	(aarch64_classify_vector_mode, aarch64_vector_data_mode_p)
	(aarch64_sve_data_mode_p, aarch64_sve_pred_mode)
	(aarch64_get_mask_mode): New functions.
	(aarch64_hard_regno_nregs): Handle SVE data modes for FP_REGS
	and FP_LO_REGS.  Handle PR_REGS, PR_LO_REGS and PR_HI_REGS.
	(aarch64_hard_regno_mode_ok): Handle VG.  Also handle the SVE
	predicate modes and predicate registers.  Explicitly restrict
	GPRs to modes of 16 bytes or smaller.  Only allow FP registers
	to store a vector mode if it is recognized by
	aarch64_classify_vector_mode.
	(aarch64_regmode_natural_size): New function.
	(aarch64_hard_regno_caller_save_mode): Return the original mode
	for predicates.
	(aarch64_sve_cnt_immediate_p, aarch64_output_sve_cnt_immediate)
	(aarch64_sve_addvl_addpl_immediate_p, aarch64_output_sve_addvl_addpl)
	(aarch64_sve_inc_dec_immediate_p, aarch64_output_sve_inc_dec_immediate)
	(aarch64_add_offset_1_temporaries, aarch64_offset_temporaries): New
	functions.
	(aarch64_add_offset): Add a temp2 parameter.  Assert that temp1
	does not overlap dest if the function is frame-related.  Handle
	SVE constants.
	(aarch64_split_add_offset): New function.
	(aarch64_add_sp, aarch64_sub_sp): Add temp2 parameters and pass
	them aarch64_add_offset.
	(aarch64_allocate_and_probe_stack_space): Add a temp2 parameter
	and update call to aarch64_sub_sp.
	(aarch64_add_cfa_expression): New function.
	(aarch64_expand_prologue): Pass extra temporary registers to the
	functions above.  Handle the case in which we need to emit new
	DW_CFA_expressions for registers that were originally saved
	relative to the stack pointer, but now have to be expressed
	relative to the frame pointer.
	(aarch64_output_mi_thunk): Pass extra temporary registers to the
	functions above.
	(aarch64_expand_epilogue): Likewise.  Prevent inheritance of
	IP0 and IP1 values for SVE frames.
	(aarch64_expand_vec_series): New function.
	(aarch64_expand_sve_widened_duplicate): Likewise.
	(aarch64_expand_sve_const_vector): Likewise.
	(aarch64_expand_mov_immediate): Add a gen_vec_duplicate parameter.
	Handle SVE constants.  Use emit_move_insn to move a force_const_mem
	into the register, rather than emitting a SET directly.
	(aarch64_emit_sve_pred_move, aarch64_expand_sve_mem_move)
	(aarch64_get_reg_raw_mode, offset_4bit_signed_scaled_p)
	(offset_6bit_unsigned_scaled_p, aarch64_offset_7bit_signed_scaled_p)
	(offset_9bit_signed_scaled_p): New functions.
	(aarch64_replicate_bitmask_imm): New function.
	(aarch64_bitmask_imm): Use it.
	(aarch64_cannot_force_const_mem): Reject expressions involving
	a CONST_POLY_INT.  Update call to aarch64_classify_symbol.
	(aarch64_classify_index): Handle SVE indices, by requiring
	a plain register index with a scale that matches the element size.
	(aarch64_classify_address): Handle SVE addresses.  Assert that
	the mode of the address is VOIDmode or an integer mode.
	Update call to aarch64_classify_symbol.
	(aarch64_classify_symbolic_expression): Update call to
	aarch64_classify_symbol.
	(aarch64_const_vec_all_in_range_p): New function.
	(aarch64_print_vector_float_operand): Likewise.
	(aarch64_print_operand): Handle 'N' and 'C'.  Use "zN" rather than
	"vN" for FP registers with SVE modes.  Handle (const ...) vectors
	and the FP immediates 1.0 and 0.5.
	(aarch64_print_address_internal): Handle SVE addresses.
	(aarch64_print_operand_address): Use ADDR_QUERY_ANY.
	(aarch64_regno_regclass): Handle predicate registers.
	(aarch64_secondary_reload): Handle big-endian reloads of SVE
	data modes.
	(aarch64_class_max_nregs): Handle SVE modes and predicate registers.
	(aarch64_rtx_costs): Check for ADDVL and ADDPL instructions.
	(aarch64_convert_sve_vector_bits): New function.
	(aarch64_override_options): Use it to handle -msve-vector-bits=.
	(aarch64_classify_symbol): Take the offset as a HOST_WIDE_INT
	rather than an rtx.
	(aarch64_legitimate_constant_p): Use aarch64_classify_vector_mode.
	Handle SVE vector and predicate modes.  Accept VL-based constants
	that need only one temporary register, and VL offsets that require
	no temporary registers.
	(aarch64_conditional_register_usage): Mark the predicate registers
	as fixed if SVE isn't available.
	(aarch64_vector_mode_supported_p): Use aarch64_classify_vector_mode.
	Return true for SVE vector and predicate modes.
	(aarch64_simd_container_mode): Take the number of bits as a poly_int64
	rather than an unsigned int.  Handle SVE modes.
	(aarch64_preferred_simd_mode): Update call accordingly.  Handle
	SVE modes.
	(aarch64_autovectorize_vector_sizes): Add BYTES_PER_SVE_VECTOR
	if SVE is enabled.
	(aarch64_sve_index_immediate_p, aarch64_sve_arith_immediate_p)
	(aarch64_sve_bitmask_immediate_p, aarch64_sve_dup_immediate_p)
	(aarch64_sve_cmp_immediate_p, aarch64_sve_float_arith_immediate_p)
	(aarch64_sve_float_mul_immediate_p): New functions.
	(aarch64_sve_valid_immediate): New function.
	(aarch64_simd_valid_immediate): Use it as the fallback for SVE vectors.
	Explicitly reject structure modes.  Check for INDEX constants.
	Handle PTRUE and PFALSE constants.
	(aarch64_check_zero_based_sve_index_immediate): New function.
	(aarch64_simd_imm_zero_p): Delete.
	(aarch64_mov_operand_p): Use aarch64_simd_valid_immediate for
	vector modes.  Accept constants in the range of CNT[BHWD].
	(aarch64_simd_scalar_immediate_valid_for_move): Explicitly
	ask for an Advanced SIMD mode.
	(aarch64_sve_ld1r_operand_p, aarch64_sve_ldr_operand_p): New functions.
	(aarch64_simd_vector_alignment): Handle SVE predicates.
	(aarch64_vectorize_preferred_vector_alignment): New function.
	(aarch64_simd_vector_alignment_reachable): Use it instead of
	the vector size.
	(aarch64_shift_truncation_mask): Use aarch64_vector_data_mode_p.
	(aarch64_output_sve_mov_immediate, aarch64_output_ptrue): New
	functions.
	(MAX_VECT_LEN): Delete.
	(expand_vec_perm_d): Add a vec_flags field.
	(emit_unspec2, aarch64_expand_sve_vec_perm): New functions.
	(aarch64_evpc_trn, aarch64_evpc_uzp, aarch64_evpc_zip)
	(aarch64_evpc_ext): Don't apply a big-endian lane correction
	for SVE modes.
	(aarch64_evpc_rev): Rename to...
	(aarch64_evpc_rev_local): ...this.  Use a predicated operation for SVE.
	(aarch64_evpc_rev_global): New function.
	(aarch64_evpc_dup): Enforce a 64-byte range for SVE DUP.
	(aarch64_evpc_tbl): Use MAX_COMPILE_TIME_VEC_BYTES instead of
	MAX_VECT_LEN.
	(aarch64_evpc_sve_tbl): New function.
	(aarch64_expand_vec_perm_const_1): Update after rename of
	aarch64_evpc_rev.  Handle SVE permutes too, trying
	aarch64_evpc_rev_global and using aarch64_evpc_sve_tbl rather
	than aarch64_evpc_tbl.
	(aarch64_vectorize_vec_perm_const): Initialize vec_flags.
	(aarch64_sve_cmp_operand_p, aarch64_unspec_cond_code)
	(aarch64_gen_unspec_cond, aarch64_expand_sve_vec_cmp_int)
	(aarch64_emit_unspec_cond, aarch64_emit_unspec_cond_or)
	(aarch64_emit_inverted_unspec_cond, aarch64_expand_sve_vec_cmp_float)
	(aarch64_expand_sve_vcond): New functions.
	(aarch64_modes_tieable_p): Use aarch64_vector_data_mode_p instead
	of aarch64_vector_mode_p.
	(aarch64_dwarf_poly_indeterminate_value): New function.
	(aarch64_compute_pressure_classes): Likewise.
	(aarch64_can_change_mode_class): Likewise.
	(TARGET_GET_RAW_RESULT_MODE, TARGET_GET_RAW_ARG_MODE): Redefine.
	(TARGET_VECTORIZE_PREFERRED_VECTOR_ALIGNMENT): Likewise.
	(TARGET_VECTORIZE_GET_MASK_MODE): Likewise.
	(TARGET_DWARF_POLY_INDETERMINATE_VALUE): Likewise.
	(TARGET_COMPUTE_PRESSURE_CLASSES): Likewise.
	(TARGET_CAN_CHANGE_MODE_CLASS): Likewise.
	* config/aarch64/constraints.md (Upa, Upl, Uav, Uat, Usv, Usi, Utr)
	(Uty, Dm, vsa, vsc, vsd, vsi, vsn, vsl, vsm, vsA, vsM, vsN): New
	constraints.
	(Dn, Dl, Dr): Accept const as well as const_vector.
	(Dz): Likewise.  Compare against CONST0_RTX.
	* config/aarch64/iterators.md: Refer to "Advanced SIMD" instead
	of "vector" where appropriate.
	(SVE_ALL, SVE_BH, SVE_BHS, SVE_BHSI, SVE_HSDI, SVE_HSF, SVE_SD)
	(SVE_SDI, SVE_I, SVE_F, PRED_ALL, PRED_BHS): New mode iterators.
	(UNSPEC_SEL, UNSPEC_ANDF, UNSPEC_IORF, UNSPEC_XORF, UNSPEC_COND_LT)
	(UNSPEC_COND_LE, UNSPEC_COND_EQ, UNSPEC_COND_NE, UNSPEC_COND_GE)
	(UNSPEC_COND_GT, UNSPEC_COND_LO, UNSPEC_COND_LS, UNSPEC_COND_HS)
	(UNSPEC_COND_HI, UNSPEC_COND_UO): New unspecs.
	(Vetype, VEL, Vel, VWIDE, Vwide, vw, vwcore, V_INT_EQUIV)
	(v_int_equiv): Extend to SVE modes.
	(Vesize, V128, v128, Vewtype, V_FP_EQUIV, v_fp_equiv, VPRED): New
	mode attributes.
	(LOGICAL_OR, SVE_INT_UNARY, SVE_FP_UNARY): New code iterators.
	(optab): Handle popcount, smin, smax, umin, umax, abs and sqrt.
	(logical_nn, lr, sve_int_op, sve_fp_op): New code attributs.
	(LOGICALF, OPTAB_PERMUTE, UNPACK, UNPACK_UNSIGNED, SVE_COND_INT_CMP)
	(SVE_COND_FP_CMP): New int iterators.
	(perm_hilo): Handle the new unpack unspecs.
	(optab, logicalf_op, su, perm_optab, cmp_op, imm_con): New int
	attributes.
	* config/aarch64/predicates.md (aarch64_sve_cnt_immediate)
	(aarch64_sve_addvl_addpl_immediate, aarch64_split_add_offset_immediate)
	(aarch64_pluslong_or_poly_operand, aarch64_nonmemory_operand)
	(aarch64_equality_operator, aarch64_constant_vector_operand)
	(aarch64_sve_ld1r_operand, aarch64_sve_ldr_operand): New predicates.
	(aarch64_sve_nonimmediate_operand): Likewise.
	(aarch64_sve_general_operand): Likewise.
	(aarch64_sve_dup_operand, aarch64_sve_arith_immediate): Likewise.
	(aarch64_sve_sub_arith_immediate, aarch64_sve_inc_dec_immediate)
	(aarch64_sve_logical_immediate, aarch64_sve_mul_immediate): Likewise.
	(aarch64_sve_dup_immediate, aarch64_sve_cmp_vsc_immediate): Likewise.
	(aarch64_sve_cmp_vsd_immediate, aarch64_sve_index_immediate): Likewise.
	(aarch64_sve_float_arith_immediate): Likewise.
	(aarch64_sve_float_arith_with_sub_immediate): Likewise.
	(aarch64_sve_float_mul_immediate, aarch64_sve_arith_operand): Likewise.
	(aarch64_sve_add_operand, aarch64_sve_logical_operand): Likewise.
	(aarch64_sve_lshift_operand, aarch64_sve_rshift_operand): Likewise.
	(aarch64_sve_mul_operand, aarch64_sve_cmp_vsc_operand): Likewise.
	(aarch64_sve_cmp_vsd_operand, aarch64_sve_index_operand): Likewise.
	(aarch64_sve_float_arith_operand): Likewise.
	(aarch64_sve_float_arith_with_sub_operand): Likewise.
	(aarch64_sve_float_mul_operand): Likewise.
	(aarch64_sve_vec_perm_operand): Likewise.
	(aarch64_pluslong_operand): Include aarch64_sve_addvl_addpl_immediate.
	(aarch64_mov_operand): Accept const_poly_int and const_vector.
	(aarch64_simd_lshift_imm, aarch64_simd_rshift_imm): Accept const
	as well as const_vector.
	(aarch64_simd_imm_zero, aarch64_simd_imm_minus_one): Move earlier
	in file.  Use CONST0_RTX and CONSTM1_RTX.
	(aarch64_simd_or_scalar_imm_zero): Likewise.  Add match_codes.
	(aarch64_simd_reg_or_zero): Accept const as well as const_vector.
	Use aarch64_simd_imm_zero.
	* config/aarch64/aarch64-sve.md: New file.
	* config/aarch64/aarch64.md: Include it.
	(VG_REGNUM, P0_REGNUM, P7_REGNUM, P15_REGNUM): New register numbers.
	(UNSPEC_REV, UNSPEC_LD1_SVE, UNSPEC_ST1_SVE, UNSPEC_MERGE_PTRUE)
	(UNSPEC_PTEST_PTRUE, UNSPEC_UNPACKSHI, UNSPEC_UNPACKUHI)
	(UNSPEC_UNPACKSLO, UNSPEC_UNPACKULO, UNSPEC_PACK)
	(UNSPEC_FLOAT_CONVERT, UNSPEC_WHILE_LO): New unspec constants.
	(sve): New attribute.
	(enabled): Disable instructions with the sve attribute unless
	TARGET_SVE.
	(movqi, movhi): Pass CONST_POLY_INT operaneds through
	aarch64_expand_mov_immediate.
	(*mov<mode>_aarch64, *movsi_aarch64, *movdi_aarch64): Handle
	CNT[BHSD] immediates.
	(movti): Split CONST_POLY_INT moves into two halves.
	(add<mode>3): Accept aarch64_pluslong_or_poly_operand.
	Split additions that need a temporary here if the destination
	is the stack pointer.
	(*add<mode>3_aarch64): Handle ADDVL and ADDPL immediates.
	(*add<mode>3_poly_1): New instruction.
	(set_clobber_cc): New expander.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>

	* simplify-rtx.c (simplify_immed_subreg): Add an inner_bytes
	parameter and use it instead of GET_MODE_SIZE (innermode).  Use
	inner_bytes * BITS_PER_UNIT instead of GET_MODE_BITSIZE (innermode).
	Use CEIL (inner_bytes, GET_MODE_UNIT_SIZE (innermode)) instead of
	GET_MODE_NUNITS (innermode).  Also add a first_elem parameter.
	Change innermode from fixed_mode_size to machine_mode.
	(simplify_subreg): Update call accordingly.  Handle a constant-sized
	subreg of a variable-length CONST_VECTOR.

2018-01-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-ssa-address.c (mem_ref_valid_without_offset_p): New function.
	(add_offset_to_base): New function, split out from...
	(create_mem_ref): ...here.  When handling a scale other than 1,
	check first whether the address is valid without the offset.
	Add it into the base if so, leaving the index and scale as-is.

2018-01-12  Jakub Jelinek  <jakub@redhat.com>

	PR c++/83778
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin): Call
	fold_for_warn before checking if arg2 is INTEGER_CST.

2018-01-12  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (load_multiple_operation): Delete.
	(store_multiple_operation): Delete.
	* config/rs6000/rs6000-cpus.def (601): Remove MASK_STRING.
	* config/rs6000/rs6000-protos.h (rs6000_output_load_multiple): Delete.
	* config/rs6000/rs6000-string.c (expand_block_move): Delete everything
	guarded by TARGET_STRING.
	(rs6000_output_load_multiple): Delete.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Delete
	OPTION_MASK_STRING / TARGET_STRING handling.
	(print_operand) <'N', 'O'>: Add comment that these are unused now.
	(const rs6000_opt_masks) <"string">: Change mask to 0.
	* config/rs6000/rs6000.h (TARGET_DEFAULT): Remove MASK_STRING.
	(MASK_STRING): Delete.
	* config/rs6000/rs6000.md (*mov<mode>_string): Delete TARGET_STRING
	parts.  Simplify.
	(load_multiple): Delete.
	(*ldmsi8): Delete.
	(*ldmsi7): Delete.
	(*ldmsi6): Delete.
	(*ldmsi5): Delete.
	(*ldmsi4): Delete.
	(*ldmsi3): Delete.
	(store_multiple): Delete.
	(*stmsi8): Delete.
	(*stmsi7): Delete.
	(*stmsi6): Delete.
	(*stmsi5): Delete.
	(*stmsi4): Delete.
	(*stmsi3): Delete.
	(movmemsi_8reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_6reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_4reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_2reg): Delete.
	(corresponding unnamed define_insn): Delete.
	(movmemsi_1reg): Delete.
	(corresponding unnamed define_insn): Delete.
	* config/rs6000/rs6000.opt (mno-string): New.
	(mstring): Replace by deprecation warning stub.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Delete -mstring.

2018-01-12  Jakub Jelinek  <jakub@redhat.com>

	* regrename.c (regrename_do_replace): If replacing the same
	reg multiple times, try to reuse last created gen_raw_REG.

	PR debug/81155
	* bb-reorder.c (pass_partition_blocks::gate): In lto don't partition
	main to workaround a bug in GDB.

2018-01-12  Tom de Vries  <tom@codesourcery.com>

	PR target/83737
	* config.gcc (nvptx*-*-*): Set use_gcc_stdint=wrap.

2018-01-12  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/80481
	* ira-color.c (get_cap_member): New function.
	(allocnos_conflict_by_live_ranges_p): Use it.
	(slot_coalesced_allocno_live_ranges_intersect_p): Add assert.
	(setup_slot_coalesced_allocno_live_ranges): Ditto.

2018-01-12  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* config/alpha/alpha.md (*saddsi_1): New insn_ans_split pattern.
	(*saddl_se_1): Ditto.
	(*ssubsi_1): Ditto.
	(*ssubl_se_1): Ditto.

2018-01-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-predcom.c (aff_combination_dr_offset): Use wi::to_poly_widest
	rather than wi::to_widest for DR_INITs.
	* tree-vect-data-refs.c (vect_find_same_alignment_drs): Use
	wi::to_poly_offset rather than wi::to_offset for DR_INIT.
	(vect_analyze_data_ref_accesses): Require both DR_INITs to be
	INTEGER_CSTs.
	(vect_analyze_group_access_1): Note that here.

2018-01-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vectorizer.c (get_vec_alignment_for_array_type): Handle
	polynomial type sizes.

2018-01-12  Richard Sandiford  <richard.sandiford@linaro.org>

	* gimplify.c (gimple_add_tmp_var_fn): Allow variables to have a
	poly_uint64 size, rather than requiring an unsigned HOST_WIDE_INT size.
	(gimple_add_tmp_var): Likewise.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* gimple.c (gimple_alloc_counts): Use uint64_t instead of int.
	(gimple_alloc_sizes): Likewise.
	(dump_gimple_statistics): Use PRIu64 in printf format.
	* gimple.h: Change uint64_t to int.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* tree-core.h: Use uint64_t instead of int.
	* tree.c (tree_node_counts): Likewise.
	(tree_node_sizes): Likewise.
	(dump_tree_statistics): Use PRIu64 in printf format.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* Makefile.in: As qsort_chk is implemented in vec.c, add
	vec.o to linkage of gencfn-macros.
	* tree.c (build_new_poly_int_cst): Add CXX_MEM_STAT_INFO as it's
	passing the info to record_node_allocation_statistics.
	(test_vector_cst_patterns): Add CXX_MEM_STAT_INFO to declaration
	and pass the info.
	* ggc-common.c (struct ggc_usage): Add operator== and use
	it in operator< and compare function.
	* mem-stats.h (struct mem_usage): Likewise.
	* vec.c (struct vec_usage): Remove operator< and compare
	function. Can be simply inherited.

2018-01-12  Martin Jambor  <mjambor@suse.cz>

	PR target/81616
	* params.def: New parameter PARAM_AVOID_FMA_MAX_BITS.
	* tree-ssa-math-opts.c: Include domwalk.h.
	(convert_mult_to_fma_1): New function.
	(fma_transformation_info): New type.
	(fma_deferring_state): Likewise.
	(cancel_fma_deferring): New function.
	(result_of_phi): Likewise.
	(last_fma_candidate_feeds_initial_phi): Likewise.
	(convert_mult_to_fma): Added deferring logic, split actual
	transformation to convert_mult_to_fma_1.
	(math_opts_dom_walker): New type.
	(math_opts_dom_walker::after_dom_children): New method, body moved
	here from pass_optimize_widening_mul::execute, added deferring logic
	bits.
	(pass_optimize_widening_mul::execute): Moved most of code to
	math_opts_dom_walker::after_dom_children.
	* config/i386/x86-tune.def (X86_TUNE_AVOID_128FMA_CHAINS): New.
	* config/i386/i386.c (ix86_option_override_internal): Added
	maybe_setting of PARAM_AVOID_FMA_MAX_BITS.

2018-01-12  Richard Biener  <rguenther@suse.de>

	PR debug/83157
	* dwarf2out.c (gen_variable_die): Do not reset old_die for
	inline instance vars.

2018-01-12  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/81819
	* config/rx/rx.c (rx_is_restricted_memory_address):
	Handle SUBREG case.

2018-01-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/80846
	* target.def (split_reduction): New target hook.
	* targhooks.c (default_split_reduction): New function.
	* targhooks.h (default_split_reduction): Declare.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): If the
	target requests first reduce vectors by combining low and high
	parts.
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Adjust.
	(get_vectype_for_scalar_type_and_size): Export.
	* tree-vectorizer.h (get_vectype_for_scalar_type_and_size): Declare.
	* doc/tm.texi.in (TARGET_VECTORIZE_SPLIT_REDUCTION): Document.
	* doc/tm.texi: Regenerate.
	* config/i386/i386.c (ix86_split_reduction): Implement
	TARGET_VECTORIZE_SPLIT_REDUCTION.

2018-01-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/83368
	* config/sparc/sparc.h (PIC_OFFSET_TABLE_REGNUM): Set to INVALID_REGNUM
	in PIC mode except for TARGET_VXWORKS_RTP.
	* config/sparc/sparc.c: Include cfgrtl.h.
	(TARGET_INIT_PIC_REG): Define.
	(TARGET_USE_PSEUDO_PIC_REG): Likewise.
	(sparc_pic_register_p): New predicate.
	(sparc_legitimate_address_p): Use it.
	(sparc_legitimize_pic_address): Likewise.
	(sparc_delegitimize_address): Likewise.
	(sparc_mode_dependent_address_p): Likewise.
	(gen_load_pcrel_sym): Remove 4th parameter.
	(load_got_register): Adjust call to above.  Remove obsolete stuff.
	(sparc_expand_prologue): Do not call load_got_register here.
	(sparc_flat_expand_prologue): Likewise.
	(sparc_output_mi_thunk): Set the pic_offset_table_rtx object.
	(sparc_use_pseudo_pic_reg): New function.
	(sparc_init_pic_reg): Likewise.
	* config/sparc/sparc.md (vxworks_load_got): Set the GOT register.
	(builtin_setjmp_receiver): Enable only for TARGET_VXWORKS_RTP.

2018-01-12  Christophe Lyon  <christophe.lyon@linaro.org>

	* doc/sourcebuild.texi (Effective-Target Keywords, Other attributes):
	Add item for branch_cost.

2018-01-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/83565
	* rtlanal.c (nonzero_bits1): On WORD_REGISTER_OPERATIONS machines, do
	not extend the result to a larger mode for rotate operations.
	(num_sign_bit_copies1): Likewise.

2018-01-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR target/40411
	* config/sol2.h (STARTFILE_ARCH_SPEC): Don't use with -shared or
	-symbolic.
	Use values-Xc.o for -pedantic.
	Link with values-xpg4.o for C90, values-xpg6.o otherwise.

2018-01-12  Martin Liska  <mliska@suse.cz>

	PR ipa/83054
	* ipa-devirt.c (final_warning_record::grow_type_warnings):
	New function.
	(possible_polymorphic_call_targets): Use it.
	(ipa_devirt): Likewise.

2018-01-12  Martin Liska  <mliska@suse.cz>

	* profile-count.h (enum profile_quality): Use 0 as invalid
	enum value of profile_quality.

2018-01-12  Chung-Ju Wu  <jasonwucj@gmail.com>

	* doc/invoke.texi (NDS32 Options): Add -mext-perf, -mext-perf2 and
	-mext-string options.

2018-01-12  Richard Biener  <rguenther@suse.de>

	* lto-streamer-out.c (DFS::DFS_write_tree_body): Process
	DECL_DEBUG_EXPR conditional on DECL_HAS_DEBUG_EXPR_P.
	* tree-streamer-in.c (lto_input_ts_decl_common_tree_pointers):
	Likewise.
	* tree-streamer-out.c (write_ts_decl_common_tree_pointers): Likewise.

2018-01-11  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* configure.ac (--with-long-double-format): Add support for the
	configuration option to change the default long double format on
	PowerPC systems.
	* config.gcc (powerpc*-linux*-*): Likewise.
	* configure: Regenerate.
	* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): If long
	double is IEEE, define __KC__ and __KF__ to allow floatn.h to be
	used without modification.

2018-01-11  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000-builtin.def (BU_P7_MISC_X): New #define.
	(SPEC_BARRIER): New instantiation of BU_P7_MISC_X.
	* config/rs6000/rs6000.c (rs6000_expand_builtin): Handle
	MISC_BUILTIN_SPEC_BARRIER.
	(rs6000_init_builtins): Likewise.
	* config/rs6000/rs6000.md (UNSPECV_SPEC_BARRIER): New UNSPECV
	enum value.
	(speculation_barrier): New define_insn.
	* doc/extend.texi: Document __builtin_speculation_barrier.

2018-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/83203
	* config/i386/i386.c (ix86_expand_vector_init_one_nonzero): If one_var
	is 0, for V{8,16}S[IF] and V[48]D[IF]mode use gen_vec_set<mode>_0.
	* config/i386/sse.md (VI8_AVX_AVX512F, VI4F_256_512): New mode
	iterators.
	(ssescalarmodesuffix): Add 512-bit vectors.  Use "d" or "q" for
	integral modes instead of "ss" and "sd".
	(vec_set<mode>_0): New define_insns for 256-bit and 512-bit
	vectors with 32-bit and 64-bit elements.
	(vecdupssescalarmodesuffix): New mode attribute.
	(vec_dup<mode>): Use it.

2018-01-11  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83330
	* config/i386/i386.c (ix86_compute_frame_layout): Align stack
	frame if argument is passed on stack.

2018-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/82682
	* ree.c (combine_reaching_defs): Optimize also
	reg2=exp; reg1=reg2; reg2=any_extend(reg1); into
	reg2=any_extend(exp); reg1=reg2;, formatting fix.

2018-01-11  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83189
	* gimple-ssa-isolate-paths.c (isolate_path): Fix profile update.

2018-01-11  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83718
	* tree-inline.c (copy_cfg_body): Adjust num&den for scaling
	after they are computed.

2018-01-11  Bin Cheng  <bin.cheng@arm.com>

	PR tree-optimization/83695
	* gimple-loop-linterchange.cc
	(tree_loop_interchange::interchange_loops): Call scev_reset_htab to
	reset cached scev information after interchange.
	(pass_linterchange::execute): Remove call to scev_reset_htab.

2018-01-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm_neon.h (vfmlal_lane_low_u32, vfmlal_lane_high_u32,
	vfmlalq_laneq_low_u32, vfmlalq_lane_low_u32, vfmlal_laneq_low_u32,
	vfmlalq_laneq_high_u32, vfmlalq_lane_high_u32, vfmlal_laneq_high_u32,
	vfmlsl_lane_low_u32, vfmlsl_lane_high_u32, vfmlslq_laneq_low_u32,
	vfmlslq_lane_low_u32, vfmlsl_laneq_low_u32, vfmlslq_laneq_high_u32,
	vfmlslq_lane_high_u32, vfmlsl_laneq_high_u32): Define.
	* config/arm/arm_neon_builtins.def (vfmal_lane_low,
	vfmal_lane_lowv4hf, vfmal_lane_lowv8hf, vfmal_lane_high,
	vfmal_lane_highv4hf, vfmal_lane_highv8hf, vfmsl_lane_low,
	vfmsl_lane_lowv4hf, vfmsl_lane_lowv8hf, vfmsl_lane_high,
	vfmsl_lane_highv4hf, vfmsl_lane_highv8hf): New sets of builtins.
	* config/arm/iterators.md (VFMLSEL2, vfmlsel2): New mode attributes.
	(V_lane_reg): Likewise.
	* config/arm/neon.md (neon_vfm<vfml_op>l_lane_<vfml_half><VCVTF:mode>):
	New define_expand.
	(neon_vfm<vfml_op>l_lane_<vfml_half><vfmlsel2><mode>): Likewise.
	(vfmal_lane_low<mode>_intrinsic,
	vfmal_lane_low<vfmlsel2><mode>_intrinsic,
	vfmal_lane_high<vfmlsel2><mode>_intrinsic,
	vfmal_lane_high<mode>_intrinsic, vfmsl_lane_low<mode>_intrinsic,
	vfmsl_lane_low<vfmlsel2><mode>_intrinsic,
	vfmsl_lane_high<vfmlsel2><mode>_intrinsic,
	vfmsl_lane_high<mode>_intrinsic): New define_insns.

2018-01-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (fp16fml): New feature.
	(ALL_SIMD): Add fp16fml.
	(armv8.2-a): Add fp16fml as an option.
	(armv8.3-a): Likewise.
	(armv8.4-a): Add fp16fml as part of fp16.
	* config/arm/arm.h (TARGET_FP16FML): Define.
	* config/arm/arm-c.c (arm_cpu_builtins): Define __ARM_FEATURE_FP16_FML
	when appropriate.
	* config/arm/arm-modes.def (V2HF): Define.
	* config/arm/arm_neon.h (vfmlal_low_u32, vfmlsl_low_u32,
	vfmlal_high_u32, vfmlsl_high_u32, vfmlalq_low_u32,
	vfmlslq_low_u32, vfmlalq_high_u32, vfmlslq_high_u32): Define.
	* config/arm/arm_neon_builtins.def (vfmal_low, vfmal_high,
	vfmsl_low, vfmsl_high): New set of builtins.
	* config/arm/iterators.md (PLUSMINUS): New code iterator.
	(vfml_op): New code attribute.
	(VFMLHALVES): New int iterator.
	(VFML, VFMLSEL): New mode attributes.
	(V_reg): Define mapping for V2HF.
	(V_hi, V_lo): New mode attributes.
	(VF_constraint): Likewise.
	(vfml_half, vfml_half_selector): New int attributes.
	* config/arm/neon.md (neon_vfm<vfml_op>l_<vfml_half><mode>): New
	define_expand.
	(vfmal_low<mode>_intrinsic, vfmsl_high<mode>_intrinsic,
	vfmal_high<mode>_intrinsic, vfmsl_low<mode>_intrinsic):
	New define_insn.
	* config/arm/t-arm-elf (v8_fps): Add fp16fml.
	* config/arm/t-multilib (v8_2_a_simd_variants): Add fp16fml.
	* config/arm/unspecs.md (UNSPEC_VFML_LO, UNSPEC_VFML_HI): New unspecs.
	* doc/invoke.texi (ARM Options): Document fp16fml.  Update armv8.4-a
	documentation.
	* doc/sourcebuild.texi (arm_fp16fml_neon_ok, arm_fp16fml_neon):
	Document new effective target and option set.

2018-01-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (armv8_4): New feature.
	(ARMv8_4a): New fgroup.
	(armv8.4-a): New arch.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/t-aprofile: Add matching rules for -march=armv8.4-a.
	* config/arm/t-arm-elf (all_v8_archs): Add armv8.4-a.
	* config/arm/t-multilib (v8_4_a_simd_variants): New variable.
	Add matching rules for -march=armv8.4-a and extensions.
	* doc/invoke.texi (ARM Options): Document -march=armv8.4-a.

2018-01-11  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/81821
	* config/rx/rx.md (BW): New mode attribute.
	(sync_lock_test_and_setsi): Add mode suffix to insn output.

2018-01-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83435
	* graphite.c (canonicalize_loop_form): Ignore fake loop exit edges.
	* graphite-scop-detection.c (scop_detection::get_sese): Likewise.
	* tree-vrp.c (add_assert_info): Drop TREE_OVERFLOW if they appear.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64.c (aarch64_address_info): Add a const_offset
	field.
	(aarch64_classify_address): Initialize it.  Track polynomial offsets.
	(aarch64_print_address_internal): Use it to check for a zero offset.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-modes.def (NUM_POLY_INT_COEFFS): Set to 2.
	* config/aarch64/aarch64-protos.h (aarch64_initial_elimination_offset):
	Return a poly_int64 rather than a HOST_WIDE_INT.
	(aarch64_offset_7bit_signed_scaled_p): Take the offset as a poly_int64
	rather than a HOST_WIDE_INT.
	* config/aarch64/aarch64.h (aarch64_frame): Protect with
	HAVE_POLY_INT_H rather than HOST_WIDE_INT.  Change locals_offset,
	hard_fp_offset, frame_size, initial_adjust, callee_offset and
	final_offset from HOST_WIDE_INT to poly_int64.
	* config/aarch64/aarch64-builtins.c (aarch64_simd_expand_args): Use
	to_constant when getting the number of units in an Advanced SIMD
	mode.
	(aarch64_builtin_vectorized_function): Check for a constant number
	of units.
	* config/aarch64/aarch64-simd.md (mov<mode>): Handle polynomial
	GET_MODE_SIZE.
	(aarch64_ld<VSTRUCT:nregs>_lane<VALLDIF:mode>): Use the nunits
	attribute instead of GET_MODE_NUNITS.
	* config/aarch64/aarch64.c (aarch64_hard_regno_nregs)
	(aarch64_class_max_nregs): Use the constant_lowest_bound of the
	GET_MODE_SIZE for fixed-size registers.
	(aarch64_const_vec_all_same_in_range_p): Use const_vec_duplicate_p.
	(aarch64_hard_regno_call_part_clobbered, aarch64_classify_index)
	(aarch64_mode_valid_for_sched_fusion_p, aarch64_classify_address)
	(aarch64_legitimize_address_displacement, aarch64_secondary_reload)
	(aarch64_print_operand, aarch64_print_address_internal)
	(aarch64_address_cost, aarch64_rtx_costs, aarch64_register_move_cost)
	(aarch64_short_vector_p, aapcs_vfp_sub_candidate)
	(aarch64_simd_attr_length_rglist, aarch64_operands_ok_for_ldpstp):
	Handle polynomial GET_MODE_SIZE.
	(aarch64_hard_regno_caller_save_mode): Likewise.  Return modes
	wider than SImode without modification.
	(tls_symbolic_operand_type): Use strip_offset instead of split_const.
	(aarch64_pass_by_reference, aarch64_layout_arg, aarch64_pad_reg_upward)
	(aarch64_gimplify_va_arg_expr): Assert that we don't yet handle
	passing and returning SVE modes.
	(aarch64_function_value, aarch64_layout_arg): Use gen_int_mode
	rather than GEN_INT.
	(aarch64_emit_probe_stack_range): Take the size as a poly_int64
	rather than a HOST_WIDE_INT, but call sorry if it isn't constant.
	(aarch64_allocate_and_probe_stack_space): Likewise.
	(aarch64_layout_frame): Cope with polynomial offsets.
	(aarch64_save_callee_saves, aarch64_restore_callee_saves): Take the
	start_offset as a poly_int64 rather than a HOST_WIDE_INT.  Track
	polynomial offsets.
	(offset_9bit_signed_unscaled_p, offset_12bit_unsigned_scaled_p)
	(aarch64_offset_7bit_signed_scaled_p): Take the offset as a
	poly_int64 rather than a HOST_WIDE_INT.
	(aarch64_get_separate_components, aarch64_process_components)
	(aarch64_expand_prologue, aarch64_expand_epilogue)
	(aarch64_use_return_insn_p): Handle polynomial frame offsets.
	(aarch64_anchor_offset): New function, split out from...
	(aarch64_legitimize_address): ...here.
	(aarch64_builtin_vectorization_cost): Handle polynomial
	TYPE_VECTOR_SUBPARTS.
	(aarch64_simd_check_vect_par_cnst_half): Handle polynomial
	GET_MODE_NUNITS.
	(aarch64_simd_make_constant, aarch64_expand_vector_init): Get the
	number of elements from the PARALLEL rather than the mode.
	(aarch64_shift_truncation_mask): Use GET_MODE_UNIT_BITSIZE
	rather than GET_MODE_BITSIZE.
	(aarch64_evpc_trn, aarch64_evpc_uzp, aarch64_evpc_ext)
	(aarch64_evpc_rev, aarch64_evpc_dup, aarch64_evpc_zip)
	(aarch64_expand_vec_perm_const_1): Handle polynomial
	d->perm.length () and d->perm elements.
	(aarch64_evpc_tbl): Likewise.  Use nelt rather than GET_MODE_NUNITS.
	Apply to_constant to d->perm elements.
	(aarch64_simd_valid_immediate, aarch64_vec_fpconst_pow_of_2): Handle
	polynomial CONST_VECTOR_NUNITS.
	(aarch64_move_pointer): Take amount as a poly_int64 rather
	than an int.
	(aarch64_progress_pointer): Avoid temporary variable.
	* config/aarch64/aarch64.md (aarch64_<crc_variant>): Use
	the mode attribute instead of GET_MODE.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64.c (aarch64_force_temporary): Assert that
	x exists before using it.
	(aarch64_add_constant_internal): Rename to...
	(aarch64_add_offset_1): ...this.  Replace regnum with separate
	src and dest rtxes.  Handle the case in which they're different,
	including when the offset is zero.  Replace scratchreg with an rtx.
	Use 2 additions if there is no spare register into which we can
	move a 16-bit constant.
	(aarch64_add_constant): Delete.
	(aarch64_add_offset): Replace reg with separate src and dest
	rtxes.  Take a poly_int64 offset instead of a HOST_WIDE_INT.
	Use aarch64_add_offset_1.
	(aarch64_add_sp, aarch64_sub_sp): Take the scratch register as
	an rtx rather than an int.  Take the delta as a poly_int64
	rather than a HOST_WIDE_INT.  Use aarch64_add_offset.
	(aarch64_expand_mov_immediate): Update uses of aarch64_add_offset.
	(aarch64_expand_prologue): Update calls to aarch64_sub_sp,
	aarch64_allocate_and_probe_stack_space and aarch64_add_offset.
	(aarch64_expand_epilogue): Update calls to aarch64_add_offset
	and aarch64_add_sp.
	(aarch64_output_mi_thunk): Use aarch64_add_offset rather than
	aarch64_add_constant.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_reinterpret_float_as_int):
	Use scalar_float_mode.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64-simd.md
	(aarch64_fml<f16mac1>l<f16quad>_low<mode>): Avoid GET_MODE_NUNITS.
	(aarch64_fml<f16mac1>l<f16quad>_high<mode>): Likewise.
	(aarch64_fml<f16mac1>l_lane_lowv2sf): Likewise.
	(aarch64_fml<f16mac1>l_lane_highv2sf): Likewise.
	(aarch64_fml<f16mac1>lq_laneq_lowv4sf): Likewise.
	(aarch64_fml<f16mac1>lq_laneq_highv4sf): Likewise.
	(aarch64_fml<f16mac1>l_laneq_lowv2sf): Likewise.
	(aarch64_fml<f16mac1>l_laneq_highv2sf): Likewise.
	(aarch64_fml<f16mac1>lq_lane_lowv4sf): Likewise.
	(aarch64_fml<f16mac1>lq_lane_highv4sf): Likewise.

2018-01-11  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/83514
	* config/arm/arm.c (arm_declare_function_name): Set arch_to_print if
	targ_options->x_arm_arch_string is non NULL.

2018-01-11  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64.h
	(AARCH64_FL_FOR_ARCH8_4): Add  AARCH64_FL_DOTPROD.

2018-01-11  Sudakshina Das  <sudi.das@arm.com>

	PR target/82096
	* expmed.c (emit_store_flag_force): Swap if const op0
	and change VOIDmode to mode of op0.

2018-01-11  Richard Sandiford  <richard.sandiford@linaro.org>

	PR rtl-optimization/83761
	* caller-save.c (replace_reg_with_saved_mem): Pass bits rather
	than bytes to mode_for_size.

2018-01-10  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83189
	* gfortran.fortran-torture/compile/pr83189.f90: New testcase.
	* tree-ssa-loop-manip.c (tree_transform_and_unroll_loop): Handle zero
	profile.

2018-01-10  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83575
	* cfgrtl.c (rtl_verify_edges): Only verify fixability of partition
	when in layout mode.
	(cfg_layout_finalize): Do not verify cfg before we are out of layout.
	* cfgcleanup.c (try_optimize_cfg): Only verify flow info when doing
	partition fixup.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-modes.def (V2HF): New VECTOR_MODE.
	* config/aarch64/aarch64-option-extension.def: Add
	AARCH64_OPT_EXTENSION of 'fp16fml'.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_FP16_FML): Define if TARGET_F16FML is true.
	* config/aarch64/predicates.md (aarch64_lane_imm3): New predicate.
	* config/aarch64/constraints.md (Ui7): New constraint.
	* config/aarch64/iterators.md (VFMLA_W): New mode iterator.
	(VFMLA_SEL_W): Ditto.
	(f16quad): Ditto.
	(f16mac1): Ditto.
	(VFMLA16_LOW): New int iterator.
	(VFMLA16_HIGH): Ditto.
	(UNSPEC_FMLAL): New unspec.
	(UNSPEC_FMLSL): Ditto.
	(UNSPEC_FMLAL2): Ditto.
	(UNSPEC_FMLSL2): Ditto.
	(f16mac): New code attribute.
	* config/aarch64/aarch64-simd-builtins.def
	(aarch64_fmlal_lowv2sf): Ditto.
	(aarch64_fmlsl_lowv2sf): Ditto.
	(aarch64_fmlalq_lowv4sf): Ditto.
	(aarch64_fmlslq_lowv4sf): Ditto.
	(aarch64_fmlal_highv2sf): Ditto.
	(aarch64_fmlsl_highv2sf): Ditto.
	(aarch64_fmlalq_highv4sf): Ditto.
	(aarch64_fmlslq_highv4sf): Ditto.
	(aarch64_fmlal_lane_lowv2sf): Ditto.
	(aarch64_fmlsl_lane_lowv2sf): Ditto.
	(aarch64_fmlal_laneq_lowv2sf): Ditto.
	(aarch64_fmlsl_laneq_lowv2sf): Ditto.
	(aarch64_fmlalq_lane_lowv4sf): Ditto.
	(aarch64_fmlsl_lane_lowv4sf): Ditto.
	(aarch64_fmlalq_laneq_lowv4sf): Ditto.
	(aarch64_fmlsl_laneq_lowv4sf): Ditto.
	(aarch64_fmlal_lane_highv2sf): Ditto.
	(aarch64_fmlsl_lane_highv2sf): Ditto.
	(aarch64_fmlal_laneq_highv2sf): Ditto.
	(aarch64_fmlsl_laneq_highv2sf): Ditto.
	(aarch64_fmlalq_lane_highv4sf): Ditto.
	(aarch64_fmlsl_lane_highv4sf): Ditto.
	(aarch64_fmlalq_laneq_highv4sf): Ditto.
	(aarch64_fmlsl_laneq_highv4sf): Ditto.
	* config/aarch64/aarch64-simd.md:
	(aarch64_fml<f16mac1>l<f16quad>_low<mode>): New pattern.
	(aarch64_fml<f16mac1>l<f16quad>_high<mode>): Ditto.
	(aarch64_simd_fml<f16mac1>l<f16quad>_low<mode>): Ditto.
	(aarch64_simd_fml<f16mac1>l<f16quad>_high<mode>): Ditto.
	(aarch64_fml<f16mac1>l_lane_lowv2sf): Ditto.
	(aarch64_fml<f16mac1>l_lane_highv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_lane_lowv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_lane_highv2sf): Ditto.
	(aarch64_fml<f16mac1>lq_laneq_lowv4sf): Ditto.
	(aarch64_fml<f16mac1>lq_laneq_highv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_laneq_lowv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_laneq_highv4sf): Ditto.
	(aarch64_fml<f16mac1>l_laneq_lowv2sf): Ditto.
	(aarch64_fml<f16mac1>l_laneq_highv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_laneq_lowv2sf): Ditto.
	(aarch64_simd_fml<f16mac>l_laneq_highv2sf): Ditto.
	(aarch64_fml<f16mac1>lq_lane_lowv4sf): Ditto.
	(aarch64_fml<f16mac1>lq_lane_highv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_lane_lowv4sf): Ditto.
	(aarch64_simd_fml<f16mac>lq_lane_highv4sf): Ditto.
	* config/aarch64/arm_neon.h (vfmlal_low_u32): New intrinsic.
	(vfmlsl_low_u32): Ditto.
	(vfmlalq_low_u32): Ditto.
	(vfmlslq_low_u32): Ditto.
	(vfmlal_high_u32): Ditto.
	(vfmlsl_high_u32): Ditto.
	(vfmlalq_high_u32): Ditto.
	(vfmlslq_high_u32): Ditto.
	(vfmlal_lane_low_u32): Ditto.
	(vfmlsl_lane_low_u32): Ditto.
	(vfmlal_laneq_low_u32): Ditto.
	(vfmlsl_laneq_low_u32): Ditto.
	(vfmlalq_lane_low_u32): Ditto.
	(vfmlslq_lane_low_u32): Ditto.
	(vfmlalq_laneq_low_u32): Ditto.
	(vfmlslq_laneq_low_u32): Ditto.
	(vfmlal_lane_high_u32): Ditto.
	(vfmlsl_lane_high_u32): Ditto.
	(vfmlal_laneq_high_u32): Ditto.
	(vfmlsl_laneq_high_u32): Ditto.
	(vfmlalq_lane_high_u32): Ditto.
	(vfmlslq_lane_high_u32): Ditto.
	(vfmlalq_laneq_high_u32): Ditto.
	(vfmlslq_laneq_high_u32): Ditto.
	* config/aarch64/aarch64.h (AARCH64_FL_F16SML): New flag.
	(AARCH64_FL_FOR_ARCH8_4): New.
	(AARCH64_ISA_F16FML): New ISA flag.
	(TARGET_F16FML): New feature flag for fp16fml.
	(doc/invoke.texi): Document new fp16fml option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-builtins.c:
	(aarch64_types_ternopu_imm_qualifiers, TYPES_TERNOPUI): New.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_SHA3): Define if TARGET_SHA3 is true.
	* config/aarch64/aarch64.h (AARCH64_FL_SHA3): New flags.
	(AARCH64_ISA_SHA3): New ISA flag.
	(TARGET_SHA3): New feature flag for sha3.
	* config/aarch64/iterators.md (sha512_op): New int attribute.
	(CRYPTO_SHA512): New int iterator.
	(UNSPEC_SHA512H): New unspec.
	(UNSPEC_SHA512H2): Ditto.
	(UNSPEC_SHA512SU0): Ditto.
	(UNSPEC_SHA512SU1): Ditto.
	* config/aarch64/aarch64-simd-builtins.def
	(aarch64_crypto_sha512hqv2di): New builtin.
	(aarch64_crypto_sha512h2qv2di): Ditto.
	(aarch64_crypto_sha512su0qv2di): Ditto.
	(aarch64_crypto_sha512su1qv2di): Ditto.
	(aarch64_eor3qv8hi): Ditto.
	(aarch64_rax1qv2di): Ditto.
	(aarch64_xarqv2di): Ditto.
	(aarch64_bcaxqv8hi): Ditto.
	* config/aarch64/aarch64-simd.md:
	(aarch64_crypto_sha512h<sha512_op>qv2di): New pattern.
	(aarch64_crypto_sha512su0qv2di): Ditto.
	(aarch64_crypto_sha512su1qv2di): Ditto.
	(aarch64_eor3qv8hi): Ditto.
	(aarch64_rax1qv2di): Ditto.
	(aarch64_xarqv2di): Ditto.
	(aarch64_bcaxqv8hi): Ditto.
	* config/aarch64/arm_neon.h (vsha512hq_u64): New intrinsic.
	(vsha512h2q_u64): Ditto.
	(vsha512su0q_u64): Ditto.
	(vsha512su1q_u64): Ditto.
	(veor3q_u16): Ditto.
	(vrax1q_u64): Ditto.
	(vxarq_u64): Ditto.
	(vbcaxq_u16): Ditto.
	* config/arm/types.md (crypto_sha512): New type attribute.
	(crypto_sha3): Ditto.
	(doc/invoke.texi): Document new sha3 option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-builtins.c:
	(aarch64_types_quadopu_imm_qualifiers, TYPES_QUADOPUI): New.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_SM3): Define if TARGET_SM4 is true.
	(__ARM_FEATURE_SM4): Define if TARGET_SM4 is true.
	* config/aarch64/aarch64.h (AARCH64_FL_SM4): New flags.
	(AARCH64_ISA_SM4): New ISA flag.
	(TARGET_SM4): New feature flag for sm4.
	* config/aarch64/aarch64-simd-builtins.def
	(aarch64_sm3ss1qv4si): Ditto.
	(aarch64_sm3tt1aq4si): Ditto.
	(aarch64_sm3tt1bq4si): Ditto.
	(aarch64_sm3tt2aq4si): Ditto.
	(aarch64_sm3tt2bq4si): Ditto.
	(aarch64_sm3partw1qv4si): Ditto.
	(aarch64_sm3partw2qv4si): Ditto.
	(aarch64_sm4eqv4si): Ditto.
	(aarch64_sm4ekeyqv4si): Ditto.
	* config/aarch64/aarch64-simd.md:
	(aarch64_sm3ss1qv4si): Ditto.
	(aarch64_sm3tt<sm3tt_op>qv4si): Ditto.
	(aarch64_sm3partw<sm3part_op>qv4si): Ditto.
	(aarch64_sm4eqv4si): Ditto.
	(aarch64_sm4ekeyqv4si): Ditto.
	* config/aarch64/iterators.md (sm3tt_op): New int iterator.
	(sm3part_op): Ditto.
	(CRYPTO_SM3TT): Ditto.
	(CRYPTO_SM3PART): Ditto.
	(UNSPEC_SM3SS1): New unspec.
	(UNSPEC_SM3TT1A): Ditto.
	(UNSPEC_SM3TT1B): Ditto.
	(UNSPEC_SM3TT2A): Ditto.
	(UNSPEC_SM3TT2B): Ditto.
	(UNSPEC_SM3PARTW1): Ditto.
	(UNSPEC_SM3PARTW2): Ditto.
	(UNSPEC_SM4E): Ditto.
	(UNSPEC_SM4EKEY): Ditto.
	* config/aarch64/constraints.md (Ui2): New constraint.
	* config/aarch64/predicates.md (aarch64_imm2): New predicate.
	* config/arm/types.md (crypto_sm3): New type attribute.
	(crypto_sm4): Ditto.
	* config/aarch64/arm_neon.h (vsm3ss1q_u32): New intrinsic.
	(vsm3tt1aq_u32): Ditto.
	(vsm3tt1bq_u32): Ditto.
	(vsm3tt2aq_u32): Ditto.
	(vsm3tt2bq_u32): Ditto.
	(vsm3partw1q_u32): Ditto.
	(vsm3partw2q_u32): Ditto.
	(vsm4eq_u32): Ditto.
	(vsm4ekeyq_u32): Ditto.
	(doc/invoke.texi): Document new sm4 option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-arches.def (armv8.4-a): New architecture.
	* config/aarch64/aarch64.h (AARCH64_ISA_V8_4): New ISA flag.
	(AARCH64_FL_FOR_ARCH8_4): New.
	(AARCH64_FL_V8_4): New flag.
	(doc/invoke.texi): Document new armv8.4-a option.

2018-01-10  Michael Collison  <michael.collison@arm.com>

	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	(__ARM_FEATURE_AES): Define if TARGET_AES is true.
	(__ARM_FEATURE_SHA2): Define if TARGET_SHA2 is true.
	* config/aarch64/aarch64-option-extension.def: Add
	AARCH64_OPT_EXTENSION of 'sha2'.
	(aes): Add AARCH64_OPT_EXTENSION of 'aes'.
	(crypto): Disable sha2 and aes if crypto disabled.
	(crypto): Enable aes and sha2 if enabled.
	(simd): Disable sha2 and aes if simd disabled.
	* config/aarch64/aarch64.h (AARCH64_FL_AES, AARCH64_FL_SHA2):
	New flags.
	(AARCH64_ISA_AES, AARCH64_ISA_SHA2): New ISA flags.
	(TARGET_SHA2): New feature flag for sha2.
	(TARGET_AES): New feature flag for aes.
	* config/aarch64/aarch64-simd.md:
	(aarch64_crypto_aes<aes_op>v16qi): Make pattern
	conditional on TARGET_AES.
	(aarch64_crypto_aes<aesmc_op>v16qi): Ditto.
	(aarch64_crypto_sha1hsi): Make pattern conditional
	on TARGET_SHA2.
	(aarch64_crypto_sha1hv4si): Ditto.
	(aarch64_be_crypto_sha1hv4si): Ditto.
	(aarch64_crypto_sha1su1v4si): Ditto.
	(aarch64_crypto_sha1<sha1_op>v4si): Ditto.
	(aarch64_crypto_sha1su0v4si): Ditto.
	(aarch64_crypto_sha256h<sha256_op>v4si): Ditto.
	(aarch64_crypto_sha256su0v4si): Ditto.
	(aarch64_crypto_sha256su1v4si): Ditto.
	(doc/invoke.texi): Document new aes and sha2 options.

2018-01-10  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83781
	* gimple-fold.c (get_range_strlen): Avoid treating arrays of pointers
	as string arrays.

2018-01-11  Martin Sebor  <msebor@gmail.com>
	    Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/83501
	PR tree-optimization/81703

	* tree-ssa-strlen.c (get_string_cst): Rename...
	(get_string_len): ...to this.  Handle global constants.
	(handle_char_store): Adjust.

2018-01-10  Kito Cheng  <kito.cheng@gmail.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-protos.h (riscv_output_return): New.
	* config/riscv/riscv.c (struct machine_function): New naked_p field.
	(riscv_attribute_table, riscv_output_return),
	(riscv_handle_fndecl_attribute, riscv_naked_function_p),
	(riscv_allocate_stack_slots_for_args, riscv_warn_func_return): New.
	(riscv_compute_frame_info): Only compute frame->mask if not a naked
	function.
	(riscv_expand_prologue): Add early return for naked function.
	(riscv_expand_epilogue): Likewise.
	(riscv_function_ok_for_sibcall): Return false for naked function.
	(riscv_set_current_function): New.
	(TARGET_SET_CURRENT_FUNCTION, TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS),
	(TARGET_ATTRIBUTE_TABLE, TARGET_WARN_FUNC_RETURN): New.
	* config/riscv/riscv.md (simple_return): Call riscv_output_return.
	* doc/extend.texi (RISC-V Function Attributes): New.

2018-01-10  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (is_complex_IBM_long_double): Explicitly
	check for 128-bit long double before checking TCmode.
	* config/rs6000/rs6000.h (FLOAT128_IEEE_P): Explicitly check for
	128-bit long doubles before checking TFmode or TCmode.
	(FLOAT128_IBM_P): Likewise.

2018-01-10  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83671
	* builtins.c (c_strlen): Unconditionally return zero for the empty
	string.
	Use -Warray-bounds for warnings.
	* gimple-fold.c (get_range_strlen): Handle non-constant lengths
	for non-constant array indices with COMPONENT_REF, arrays of
	arrays, and pointers to arrays.
	(gimple_fold_builtin_strlen): Determine and set length range for
	non-constant character arrays.

2018-01-10  Aldy Hernandez  <aldyh@redhat.com>

	PR middle-end/81897
	* tree-ssa-uninit.c (convert_control_dep_chain_into_preds): Skip
	empty blocks.

2018-01-10  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.c (dwarf2out_var_location): Do not pass NULL to fprintf.

2018-01-10  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83399
	* config/rs6000/rs6000.c (print_operand) <'y'>: Use
	VECTOR_MEM_ALTIVEC_OR_VSX_P.
	* config/rs6000/vsx.md (*vsx_le_perm_load_<mode> for VSX_D): Use
	indexed_or_indirect_operand predicate.
	(*vsx_le_perm_load_<mode> for VSX_W): Likewise.
	(*vsx_le_perm_load_v8hi): Likewise.
	(*vsx_le_perm_load_v16qi): Likewise.
	(*vsx_le_perm_store_<mode> for VSX_D): Likewise.
	(*vsx_le_perm_store_<mode> for VSX_W): Likewise.
	(*vsx_le_perm_store_v8hi): Likewise.
	(*vsx_le_perm_store_v16qi): Likewise.
	(eight unnamed splitters): Likewise.

2018-01-10  Peter Bergner  <bergner@vnet.ibm.com>

	* config/rs6000/x86intrin.h: Change #warning to #error. Update message.
	* config/rs6000/emmintrin.h: Likewise.
	* config/rs6000/mmintrin.h: Likewise.
	* config/rs6000/xmmintrin.h: Likewise.

2018-01-10  David Malcolm  <dmalcolm@redhat.com>

	PR c++/43486
	* tree-core.h: Document EXPR_LOCATION_WRAPPER_P's usage of
	"public_flag".
	* tree.c (tree_nop_conversion): Return true for location wrapper
	nodes.
	(maybe_wrap_with_location): New function.
	(selftest::check_strip_nops): New function.
	(selftest::test_location_wrappers): New function.
	(selftest::tree_c_tests): Call it.
	* tree.h (STRIP_ANY_LOCATION_WRAPPER): New macro.
	(maybe_wrap_with_location): New decl.
	(EXPR_LOCATION_WRAPPER_P): New macro.
	(location_wrapper_p): New inline function.
	(tree_strip_any_location_wrapper): New inline function.

2018-01-10  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/83735
	* config/i386/i386.c (ix86_compute_frame_layout): Always adjust
	stack_realign_offset for the largest alignment of stack slot
	actually used.
	(ix86_find_max_used_stack_alignment): New function.
	(ix86_finalize_stack_frame_flags): Use it.  Set
	max_used_stack_alignment if we don't realign stack.
	* config/i386/i386.h (machine_function): Add
	max_used_stack_alignment.

2018-01-10  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/arm.opt (-mbranch-cost): New option.
	* config/arm/arm.h (BRANCH_COST): Take arm_branch_cost into
	account.

2018-01-10  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/83629
	* config/rs6000/rs6000.md (load_toc_v4_PIC_2, load_toc_v4_PIC_3b,
	load_toc_v4_PIC_3c): Wrap const term in CONST RTL.

2018-01-10  Richard Biener  <rguenther@suse.de>

	PR debug/83765
	* dwarf2out.c (gen_subprogram_die): Hoist old_die && declaration
	early out so it also covers the case where we have a non-NULL
	origin.

2018-01-10  Richard Sandiford  <richard.sandiford@linaro.org>

	PR tree-optimization/83753
	* tree-vect-stmts.c (get_group_load_store_type): Use VMAT_CONTIGUOUS
	for non-strided grouped accesses if the number of elements is 1.

2018-01-10  Jan Hubicka  <hubicka@ucw.cz>

	PR target/81616
	* i386.c (ix86_vectorize_builtin_gather): Check TARGET_USE_GATHER.
	* i386.h (TARGET_USE_GATHER): Define.
	* x86-tune.def (X86_TUNE_USE_GATHER): New.

2018-01-10  Martin Liska  <mliska@suse.cz>

	PR bootstrap/82831
	* basic-block.h (CLEANUP_NO_PARTITIONING): New define.
	* bb-reorder.c (pass_reorder_blocks::execute): Do not clean up
	partitioning.
	* cfgcleanup.c (try_optimize_cfg): Fix up partitioning if
	CLEANUP_NO_PARTITIONING is not set.

2018-01-10  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi: Remove documentation of (const ...) wrappers
	for vectors, as a partial revert of r254296.
	* rtl.h (const_vec_p): Delete.
	(const_vec_duplicate_p): Don't test for vector CONSTs.
	(unwrap_const_vec_duplicate, const_vec_series_p): Likewise.
	* expmed.c (make_tree): Likewise.

	Revert:
	* common.md (E, F): Use CONSTANT_P instead of checking for
	CONST_VECTOR.
	* emit-rtl.c (gen_lowpart_common): Use const_vec_p instead of
	checking for CONST_VECTOR.

2018-01-09  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/83575
	* predict.c (force_edge_cold): Handle in more sane way edges
	with no prediction.

2018-01-09  Carl Love  <cel@us.ibm.com>

	* config/rs6002/altivec.md (p8_vmrgow): Add support for V2DI, V2DF,
	V4SI, V4SF types.
	(p8_vmrgew): Add support for V2DI, V2DF, V4SF types.
	* config/rs6000/rs6000-builtin.def: Add definitions for FLOAT2_V2DF,
	VMRGEW_V2DI, VMRGEW_V2DF, VMRGEW_V4SF, VMRGOW_V4SI, VMRGOW_V4SF,
	VMRGOW_V2DI, VMRGOW_V2DF.  Remove definition for VMRGOW.
	* config/rs6000/rs6000-c.c (VSX_BUILTIN_VEC_FLOAT2,
	P8V_BUILTIN_VEC_VMRGEW, P8V_BUILTIN_VEC_VMRGOW):  Add definitions.
	* config/rs6000/rs6000-protos.h: Add extern defition for
	rs6000_generate_float2_double_code.
	* config/rs6000/rs6000.c (rs6000_generate_float2_double_code): Add
	function.
	* config/rs6000/vsx.md (vsx_xvcdpsp): Add define_insn.
	(float2_v2df): Add define_expand.

2018-01-09  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* combine.c (force_int_to_mode) <case ASHIFT>: Use mode instead of
	op_mode in the force_to_mode call.

2018-01-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_evpc_trn): Use d.perm.series_p
	instead of checking each element individually.
	(aarch64_evpc_uzp): Likewise.
	(aarch64_evpc_zip): Likewise.
	(aarch64_evpc_ext): Likewise.
	(aarch64_evpc_rev): Likewise.
	(aarch64_evpc_dup): Test the encoding for a single duplicated element,
	instead of checking each element individually.  Return true without
	generating rtl if
	(aarch64_vectorize_vec_perm_const): Use all_from_input_p to test
	whether all selected elements come from the same input, instead of
	checking each element individually.  Remove calls to gen_rtx_REG,
	start_sequence and end_sequence and instead assert that no rtl is
	generated.

2018-01-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* config/aarch64/aarch64.c (aarch64_legitimate_constant_p): Fix
	order of HIGH and CONST checks.

2018-01-09  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (permute_vec_elements): Create a fresh variable
	if the destination isn't an SSA_NAME.

2018-01-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83668
	* graphite.c (canonicalize_loop_closed_ssa): Add edge argument,
	move prologue...
	(canonicalize_loop_form): ... here, renamed from ...
	(canonicalize_loop_closed_ssa_form): ... this and amended to
	swap successor edges for loop exit blocks to make us use
	the RPO order we need for initial schedule generation.

2018-01-09  Joseph Myers  <joseph@codesourcery.com>

	PR tree-optimization/64811
	* match.pd: When optimizing comparisons with Inf, avoid
	introducing or losing exceptions from comparisons with NaN.

2018-01-09  Martin Liska  <mliska@suse.cz>

	PR sanitizer/82517
	* asan.c (shadow_mem_size): Add gcc_assert.

2018-01-09  Georg-Johann Lay  <avr@gjlay.de>

	Don't save registers in main().

	PR target/83738
	* doc/invoke.texi (AVR Options) [-mmain-is-OS_task]: Document it.
	* config/avr/avr.opt (-mmain-is-OS_task): New target option.
	* config/avr/avr.c (avr_set_current_function): Don't error if
	naked, OS_task or OS_main are specified at the same time.
	(avr_function_ok_for_sibcall): Don't disable sibcalls for OS_task,
	OS_main.
	(avr_insert_attributes) [-mmain-is-OS_task] <main>: Add OS_task
	attribute.
	* common/config/avr/avr-common.c (avr_option_optimization_table):
	Switch on -mmain-is-OS_task for optimizing compilations.

2018-01-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83572
	* graphite.c: Include cfganal.h.
	(graphite_transform_loops): Connect infinite loops to exit
	and remove fake edges at the end.

2018-01-09  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (edge_badness): Revert accidental checkin.

2018-01-09  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/80763
	* ipa-comdats.c (set_comdat_group): Only set comdat group of real
	symbols; not inline clones.

2018-01-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/83507
	* modulo-sched.c (schedule_reg_moves): Punt if we'd need to move
	hard registers.  Formatting fixes.

	PR preprocessor/83722
	* gcc.c (try_generate_repro): Pass
	&temp_stderr_files[RETRY_ICE_ATTEMPTS - 1] rather than
	&temp_stdout_files[RETRY_ICE_ATTEMPTS - 1] as last argument to
	do_report_bug.

2018-01-08  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>

	* config/riscv/riscv.c (machine_function::is_leaf): Remove field.
	(riscv_leaf_function_p): Delete.
	(riscv_function_ok_for_sibcall): Return false when TARGET_SAVE_RESTORE.

2018-01-08  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* config/rs6000/rs6000-string.c (do_load_for_compare_from_addr): New
	function.
	(do_ifelse): New function.
	(do_isel): New function.
	(do_sub3): New function.
	(do_add3): New function.
	(do_load_mask_compare): New function.
	(do_overlap_load_compare): New function.
	(expand_compare_loop): New function.
	(expand_block_compare): Call expand_compare_loop() when appropriate.
	* config/rs6000/rs6000.opt (-mblock-compare-inline-limit): Change
	option description.
	(-mblock-compare-inline-loop-limit): New option.

2018-01-08  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	PR target/83677
	* config/rs6000/altivec.md (*altivec_vpermr_<mode>_internal):
	Reverse order of second and third operands in first alternative.
	* config/rs6000/rs6000.c (rs6000_expand_vector_set): Reverse order
	of first and second elements in UNSPEC_VPERMR vector.
	(altivec_expand_vec_perm_le): Likewise.

2018-01-08  Jeff Law  <law@redhat.com>

	PR rtl-optimizatin/81308
	* tree-switch-conversion.c (cfg_altered): New file scoped static.
	(process_switch): If group_case_labels makes a change, then set
	cfg_altered.
	(pass_convert_switch::execute): If a switch is converted, then
	set cfg_altered.  Return TODO_cfg_cleanup if cfg_altered is true.

	PR rtl-optimization/81308
	* recog.c (split_all_insns): Conditionally cleanup the CFG after
	splitting insns.

2018-01-08  Vidya Praveen  <vidyapraveen@arm.com>

	PR target/83663 - Revert r255946
	* config/aarch64/aarch64.c (aarch64_expand_vector_init): Modify code
	generation for cases where splatting a value is not useful.
	* simplify-rtx.c (simplify_ternary_operation): Simplify vec_merge
	across a vec_duplicate and a paradoxical subreg forming a vector
	mode to a vec_concat.

2018-01-08  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/t-aprofile (MULTILIB_MATCHES): Add mapping rules for
	-march=armv8.3-a variants.
	* config/arm/t-multilib: Likewise.
	* config/arm/t-arm-elf: Likewise.  Handle dotprod extension.

2018-01-08  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (cceq_ior_compare): Remove * so I can use it
	to generate rtl.
	(cceq_ior_compare_complement): Give it a name so I can use it, and
	change boolean_or_operator predicate to boolean_operator so it can
	be used to generate a crand.
	(eqne): New code iterator.
	(bd/bd_neg): New code_attrs.
	(<bd>_<mode>): New name for ctr<mode>_internal[12] now combined into
	a single define_insn.
	(<bd>tf_<mode>): A new insn pattern for the conditional form branch
	decrement (bdnzt/bdnzf/bdzt/bdzf).
	* config/rs6000/rs6000.c (rs6000_legitimate_combined_insn): Updated
	with the new names of the branch decrement patterns, and added the
	names of the branch decrement conditional patterns.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83563
	* graphite.c (canonicalize_loop_closed_ssa_form): Reset the SCEV
	cache.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/83713
	* convert.c (do_narrow): Properly guard TYPE_OVERFLOW_WRAPS checks.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83685
	* tree-ssa-pre.c (create_expression_by_pieces): Do not insert
	references to abnormals.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR lto/83719
	* dwarf2out.c (output_indirect_strings): Handle empty
	skeleton_debug_str_hash.
	(dwarf2out_early_finish): Index strings for -gsplit-dwarf.

2018-01-08  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (TARGET_TRAMPOLINE_ADJUST_ADDRESS): Delete.
	(emit_store_direct): Likewise.
	(arc_trampoline_adjust_address): Likewise.
	(arc_asm_trampoline_template): New function.
	(arc_initialize_trampoline): Use asm_trampoline_template.
	(TARGET_ASM_TRAMPOLINE_TEMPLATE): Define.
	* config/arc/arc.h (TRAMPOLINE_SIZE): Adjust to 16.
	* config/arc/arc.md (flush_icache): Delete pattern.

2018-01-08  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-c.def (__ARC_UNALIGNED__): New define.
	* config/arc/arc.h (STRICT_ALIGNMENT): Control this macro using
	munaligned-access.

2018-01-08  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	PR target/83681
	* config/epiphany/epiphany.h (make_pass_mode_switch_use): Guard
	by not USED_FOR_TARGET.
	(make_pass_resolve_sw_modes): Likewise.

2018-01-08  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config/nios2/nios2.h (nios2_section_threshold): Guard by not
	USED_FOR_TARGET.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/83580
	* tree-data-ref.c (split_constant_offset): Remove STRIP_NOPS.

2018-01-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/83517
	* match.pd ((t * 2) / 2) -> t): Add missing :c.

2018-01-06  Aldy Hernandez  <aldyh@redhat.com>

	PR middle-end/81897
	* tree-ssa-uninit.c (compute_control_dep_chain): Do not bail on
	basic blocks with a small number of successors.
	(convert_control_dep_chain_into_preds): Improve handling of
	forwarder blocks.
	(dump_predicates): Split apart into...
	(dump_pred_chain): ...here...
	(dump_pred_info): ...and here.
	(can_one_predicate_be_invalidated_p): Add debugging printfs.
	(can_chain_union_be_invalidated_p): Improve check for invalidation
	of paths.
	(uninit_uses_cannot_happen): Avoid unnecessary if
	convert_control_dep_chain_into_preds yielded nothing.

2018-01-06  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83640
	* gimple-ssa-warn-restrict.c (builtin_access::builtin_access): Avoid
	subtracting negative offset from size.
	(builtin_access::overlap): Adjust offset bounds of the access to fall
	within the size of the object if possible.

2018-01-06  Richard Sandiford  <richard.sandiford@linaro.org>

	PR rtl-optimization/83699
	* expmed.c (extract_bit_field_1): Restrict the vector usage of
	extract_bit_field_as_subreg to cases in which the extracted
	value is also a vector.

	* lra-constraints.c (process_alt_operands): Test for the equivalence
	substitutions when detecting a possible reload cycle.

2018-01-06  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83480
	* toplev.c (process_options): Don't enable debug_nonbind_markers_p
	by default if flag_selective_schedling{,2}.  Formatting fixes.

	PR rtl-optimization/83682
	* rtl.h (const_vec_duplicate_p): Only return true for VEC_DUPLICATE
	if it has non-VECTOR_MODE element mode.
	(vec_duplicate_p): Likewise.

	PR middle-end/83694
	* cfgexpand.c (expand_debug_expr): Punt if mode1 is VOIDmode
	and bitsize might be greater than MAX_BITSIZE_MODE_ANY_INT.

2018-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/83604
	* config/i386/i386-builtin.def
	(__builtin_ia32_vgf2p8affineinvqb_v64qi,
	__builtin_ia32_vgf2p8affineqb_v64qi, __builtin_ia32_vgf2p8mulb_v64qi):
	Require also OPTION_MASK_ISA_AVX512F in addition to
	OPTION_MASK_ISA_GFNI.
	(__builtin_ia32_vgf2p8affineinvqb_v16qi_mask,
	__builtin_ia32_vgf2p8affineqb_v16qi_mask): Require
	OPTION_MASK_ISA_AVX512VL instead of OPTION_MASK_ISA_SSE in addition
	to OPTION_MASK_ISA_GFNI.
	(__builtin_ia32_vgf2p8mulb_v32qi_mask): Require
	OPTION_MASK_ISA_AVX512VL in addition to OPTION_MASK_ISA_GFNI and
	OPTION_MASK_ISA_AVX512BW.
	(__builtin_ia32_vgf2p8mulb_v16qi_mask): Require
	OPTION_MASK_ISA_AVX512VL instead of OPTION_MASK_ISA_AVX512BW in
	addition to OPTION_MASK_ISA_GFNI.
	(__builtin_ia32_vgf2p8affineinvqb_v16qi,
	__builtin_ia32_vgf2p8affineqb_v16qi, __builtin_ia32_vgf2p8mulb_v16qi):
	Require OPTION_MASK_ISA_SSE2 instead of OPTION_MASK_ISA_SSE in addition
	to OPTION_MASK_ISA_GFNI.
	* config/i386/i386.c (def_builtin): Change to builtin isa/isa2 being
	a requirement for all ISAs rather than any of them with a few
	exceptions.
	(ix86_add_new_builtins): Clear OPTION_MASK_ISA_64BIT from isa before
	processing.
	(ix86_expand_builtin): Require all ISAs from builtin's isa and isa2
	bitmasks to be enabled with 3 exceptions, instead of requiring any
	enabled ISA with lots of exceptions.
	* config/i386/sse.md (vgf2p8affineinvqb_<mode><mask_name>,
	vgf2p8affineqb_<mode><mask_name>, vgf2p8mulb_<mode><mask_name>):
	Change avx512bw in isa attribute to avx512f.
	* config/i386/sgxintrin.h: Add license boilerplate.
	* config/i386/vaesintrin.h: Likewise.  Fix macro spelling __AVX512F
	to __AVX512F__ and __AVX512VL to __AVX512VL__.
	(_mm256_aesdec_epi128, _mm256_aesdeclast_epi128, _mm256_aesenc_epi128,
	_mm256_aesenclast_epi128): Enable temporarily avx if __AVX__ is not
	defined.
	* config/i386/gfniintrin.h (_mm_gf2p8mul_epi8,
	_mm_gf2p8affineinv_epi64_epi8, _mm_gf2p8affine_epi64_epi8): Enable
	temporarily sse2 rather than sse if not enabled already.

	PR target/83604
	* config/i386/sse.md (VI248_VLBW): Rename to ...
	(VI248_AVX512VL): ... this.  Don't guard V32HI with TARGET_AVX512BW.
	(vpshrd_<mode><mask_name>, vpshld_<mode><mask_name>,
	vpshrdv_<mode>, vpshrdv_<mode>_mask, vpshrdv_<mode>_maskz,
	vpshrdv_<mode>_maskz_1, vpshldv_<mode>, vpshldv_<mode>_mask,
	vpshldv_<mode>_maskz, vpshldv_<mode>_maskz_1): Use VI248_AVX512VL
	mode iterator instead of VI248_VLBW.

2018-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (record_modified_bb_info): Add OP.
	(record_modified): Skip clobbers; add debug output.
	(param_change_prob): Use sreal frequencies.

2018-01-05  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-data-refs.c (vect_compute_data_ref_alignment): Don't
	punt for user-aligned variables.

2018-01-05  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-chrec.c (chrec_contains_symbols): Return true for
	POLY_INT_CST.

2018-01-05  Sudakshina Das  <sudi.das@arm.com>

	PR target/82439
	* simplify-rtx.c (simplify_relational_operation_1): Add simplifications
	of (x|y) == x for BICS pattern.

2018-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/83605
	* gimple-ssa-strength-reduction.c: Include tree-eh.h.
	(find_candidates_dom_walker::before_dom_children): Ignore stmts that
	can throw.

2018-01-05  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* config.gcc (epiphany-*-elf*): Add (epiphany-*-rtems*) configuration.
	* config/epiphany/rtems.h: New file.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>
	    Uros Bizjak  <ubizjak@gmail.com>

	PR target/83554
	* config/i386/i386.md (*<rotate_insn>hi3_1 splitter): Use
	QIreg_operand instead of register_operand predicate.
	* config/i386/i386.c (ix86_rop_should_change_byte_p,
	set_rop_modrm_reg_bits, ix86_mitigate_rop): Use -mmitigate-rop in
	comments instead of -fmitigate[-_]rop.

2018-01-04  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR bootstrap/81926
	* cgraphunit.c (symbol_table::compile): Switch to text_section
	before calling assembly_start debug hook.
	* run-rtl-passes.c (run_rtl_passes): Likewise.
	Include output.h.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vrp.c (extract_range_from_binary_expr_1): Check
	range_int_cst_p rather than !symbolic_range_p before calling
	extract_range_from_multiplicative_op_1.

2018-01-04  Jeff Law  <law@redhat.com>

	* tree-ssa-math-opts.c (execute_cse_reciprocals_1): Remove
	redundant test in assertion.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi: Document machine_mode wrapper classes.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* fold-const.c (fold_ternary_loc): Check tree_fits_uhwi_p before
	using tree_to_uhwi.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-ssa-forwprop.c (is_combined_permutation_identity): Allow
	the VEC_PERM_EXPR fold to fail.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83585
	* bb-reorder.c (insert_section_boundary_note): Set has_bb_partition
	to switched_sections.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	PR target/83680
	* config/arm/arm.c (arm_vectorize_vec_perm_const): Fix inverted
	test for d.testing.

2018-01-04  Peter Bergner  <bergner@vnet.ibm.com>

	PR target/83387
	* config/rs6000/rs6000.c (rs6000_discover_homogeneous_aggregate): Do not
	allow arguments in FP registers if TARGET_HARD_FLOAT is false.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83666
	* cfgexpand.c (expand_debug_expr) <case BIT_FIELD_REF>: Punt if mode
	is BLKmode and bitpos not zero or mode change is needed.

2018-01-04  Richard Sandiford  <richard.sandiford@linaro.org>

	PR target/83675
	* config/sparc/sparc.c (sparc_vectorize_vec_perm_const): Require
	TARGET_VIS2.

2018-01-04  Uros Bizjak  <ubizjak@gmail.com>

	PR target/83628
	* config/alpha/alpha.md (*sadd<modesuffix>): Use ASHIFT
	instead of MULT rtx.  Update all corresponding splitters.
	(*saddl_se): Ditto.
	(*ssub<modesuffix>): Ditto.
	(*ssubl_se): Ditto.
	(*cmp_sadd_di): Update split patterns.
	(*cmp_sadd_si): Ditto.
	(*cmp_sadd_sidi): Ditto.
	(*cmp_ssub_di): Ditto.
	(*cmp_ssub_si): Ditto.
	(*cmp_ssub_sidi): Ditto.
	* config/alpha/predicates.md (const23_operand): New predicate.
	* config/alpha/alpha.c (alpha_rtx_costs) [PLUS, MINUS]:
	Look for ASHIFT, not MULT inner operand.
	(alpha_split_conditional_move): Update for *sadd<modesuffix> change.

2018-01-04  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/83669
	* gcov.c (output_intermediate_file): Add version to intermediate
	gcov file.
	* doc/gcov.texi: Document new field 'version' in intermediate
	file format. Fix location of '-k' option of gcov command.

2018-01-04  Martin Liska  <mliska@suse.cz>

	PR ipa/82352
	* ipa-icf.c (sem_function::merge): Do not cross comdat boundary.

2018-01-04  Jakub Jelinek  <jakub@redhat.com>

	* gimple-ssa-sprintf.c (parse_directive): Cast second dir.len to uhwi.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83655
	* gimple-ssa-warn-restrict.c (wrestrict_dom_walker::check_call): Avoid
	checking calls with invalid arguments.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_get_store_rhs): New function.
	(vectorizable_mask_load_store): Delete.
	(vectorizable_call): Return false for masked loads and stores.
	(vectorizable_store): Handle IFN_MASK_STORE.  Use vect_get_store_rhs
	instead of gimple_assign_rhs1.
	(vectorizable_load): Handle IFN_MASK_LOAD.
	(vect_transform_stmt): Don't set is_store for call_vec_info_type.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_build_gather_load_calls): New function,
	split out from..,
	(vectorizable_mask_load_store): ...here.
	(vectorizable_load): ...and here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_build_all_ones_mask)
	(vect_build_zero_merge_argument): New functions, split out from...
	(vectorizable_load): ...here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_check_store_rhs): New function,
	split out from...
	(vectorizable_mask_load_store): ...here.
	(vectorizable_store): ...and here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-stmts.c (vect_check_load_store_mask): New function,
	split out from...
	(vectorizable_mask_load_store): ...here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vectorizer.h (vec_load_store_type): Moved from tree-vec-stmts.c
	(vect_model_store_cost): Take a vec_load_store_type instead of a
	vect_def_type.
	* tree-vect-stmts.c (vec_load_store_type): Move to tree-vectorizer.h.
	(vect_model_store_cost): Take a vec_load_store_type instead of a
	vect_def_type.
	(vectorizable_mask_load_store): Update accordingly.
	(vectorizable_store): Likewise.
	* tree-vect-slp.c (vect_analyze_slp_cost_1): Update accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-loop.c (vect_transform_loop): Stub out scalar
	IFN_MASK_LOAD calls here rather than...
	* tree-vect-stmts.c (vectorizable_mask_load_store): ...here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expmed.c (extract_bit_field_1): For vector extracts,
	fall back to extract_bit_field_as_subreg if vec_extract
	isn't available.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* lra-spills.c (pseudo_reg_slot_compare): Sort slots by whether
	they are variable or constant sized.
	(assign_stack_slot_num_and_sort_pseudos): Don't reuse variable-sized
	slots for constant-sized data.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): When
	handling COND_EXPRs with boolean comparisons, try to find a better
	basis for the mask type than the boolean itself.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi (MAX_BITSIZE_MODE_ANY_MODE): Describe how the default
	is calculated and how it can be overridden.
	* genmodes.c (max_bitsize_mode_any_mode): New variable.
	(create_modes): Initialize it from MAX_BITSIZE_MODE_ANY_MODE,
	if defined.
	(emit_max_int): Use it to set the output MAX_BITSIZE_MODE_ANY_MODE,
	if nonzero.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_output_simd_mov_immediate):
	Remove the mode argument.
	(aarch64_simd_valid_immediate): Remove the mode and inverse
	arguments.
	* config/aarch64/iterators.md (bitsize): New iterator.
	* config/aarch64/aarch64-simd.md (*aarch64_simd_mov<mode>, and<mode>3)
	(ior<mode>3): Update calls to aarch64_output_simd_mov_immediate.
	* config/aarch64/constraints.md (Do, Db, Dn): Update calls to
	aarch64_simd_valid_immediate.
	* config/aarch64/predicates.md (aarch64_reg_or_orr_imm): Likewise.
	(aarch64_reg_or_bic_imm): Likewise.
	* config/aarch64/aarch64.c (simd_immediate_info): Replace mvn
	with an insn_type enum and msl with a modifier_type enum.
	Replace element_width with a scalar_mode.  Change the shift
	to unsigned int.  Add constructors for scalar_float_mode and
	scalar_int_mode elements.
	(aarch64_vect_float_const_representable_p): Delete.
	(aarch64_can_const_movi_rtx_p)
	(aarch64_simd_scalar_immediate_valid_for_move)
	(aarch64_simd_make_constant): Update call to
	aarch64_simd_valid_immediate.
	(aarch64_advsimd_valid_immediate_hs): New function.
	(aarch64_advsimd_valid_immediate): Likewise.
	(aarch64_simd_valid_immediate): Remove mode and inverse
	arguments.  Rewrite to use the above.  Use const_vec_duplicate_p
	to detect duplicated constants and use aarch64_float_const_zero_rtx_p
	and aarch64_float_const_representable_p on the result.
	(aarch64_output_simd_mov_immediate): Remove mode argument.
	Update call to aarch64_simd_valid_immediate and use of
	simd_immediate_info.
	(aarch64_output_scalar_simd_mov_immediate): Update call
	accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_precision): Prefix with CONST_MODE_PRECISION.
	(mode_nunits): Likewise CONST_MODE_NUNITS.
	* machmode.def (ADJUST_NUNITS): Document.
	* genmodes.c (mode_data::need_nunits_adj): New field.
	(blank_mode): Update accordingly.
	(adj_nunits): New variable.
	(print_maybe_const_decl): Replace CATEGORY with a NEEDS_ADJ
	parameter.
	(emit_mode_size_inline): Set need_bytesize_adj for all modes
	listed in adj_nunits.
	(emit_mode_nunits_inline): Set need_nunits_adj for all modes
	listed in adj_nunits.  Don't emit case statements for such modes.
	(emit_insn_modes_h): Emit definitions of CONST_MODE_NUNITS
	and CONST_MODE_PRECISION.  Make CONST_MODE_SIZE expand to
	nothing if adj_nunits is nonnull.
	(emit_mode_precision, emit_mode_nunits): Use print_maybe_const_decl.
	(emit_mode_unit_size, emit_mode_base_align, emit_mode_ibit)
	(emit_mode_fbit): Update use of print_maybe_const_decl.
	(emit_move_size): Likewise.  Treat the array as non-const
	if adj_nunits.
	(emit_mode_adjustments): Handle adj_nunits.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* machmode.def (VECTOR_MODES_WITH_PREFIX): Document.
	* genmodes.c (VECTOR_MODES_WITH_PREFIX): New macro.
	(VECTOR_MODES): Use it.
	(make_vector_modes): Take the prefix as an argument.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* mode-classes.def (MODE_VECTOR_BOOL): New mode class.
	* machmode.h (INTEGRAL_MODE_P, VECTOR_MODE_P): Return true
	for MODE_VECTOR_BOOL.
	* machmode.def (VECTOR_BOOL_MODE): Document.
	* genmodes.c (VECTOR_BOOL_MODE): New macro.
	(make_vector_bool_mode): New function.
	(complete_mode, emit_mode_wider, emit_mode_adjustments): Handle
	MODE_VECTOR_BOOL.
	* lto-streamer-in.c (lto_input_mode_table): Likewise.
	* rtx-vector-builder.c (rtx_vector_builder::find_cached_value):
	Likewise.
	* stor-layout.c (int_mode_for_mode): Likewise.
	* tree.c (build_vector_type_for_mode): Likewise.
	* varasm.c (output_constant_pool_2): Likewise.
	* emit-rtl.c (init_emit_once): Make sure that CONST1_RTX (BImode) and
	CONSTM1_RTX (BImode) are the same thing.  Initialize const_tiny_rtx
	for MODE_VECTOR_BOOL.
	* expr.c (expand_expr_real_1): Use VECTOR_MODE_P instead of a list
	of mode class checks.
	* tree-vect-generic.c (expand_vector_operation): Use VECTOR_MODE_P
	instead of a list of mode class checks.
	(expand_vector_scalar_condition): Likewise.
	(type_for_widest_vector_mode): Handle BImode as an inner mode.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_size): Change from unsigned short to
	poly_uint16_pod.
	(mode_to_bytes): Return a poly_uint16 rather than an unsigned short.
	(GET_MODE_SIZE): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is not polynomial.
	(fixed_size_mode::includes_p): Check for constant-sized modes.
	* genmodes.c (emit_mode_size_inline): Make mode_size_inline
	return a poly_uint16 rather than an unsigned short.
	(emit_mode_size): Change the type of mode_size from unsigned short
	to poly_uint16_pod.  Use ZERO_COEFFS for the initializer.
	(emit_mode_adjustments): Cope with polynomial vector sizes.
	* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
	for GET_MODE_SIZE.
	* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
	for GET_MODE_SIZE.
	* auto-inc-dec.c (try_merge): Treat GET_MODE_SIZE as polynomial.
	* builtins.c (expand_ifn_atomic_compare_exchange_into_call): Likewise.
	* caller-save.c (setup_save_areas): Likewise.
	(replace_reg_with_saved_mem): Likewise.
	* calls.c (emit_library_call_value_1): Likewise.
	* combine-stack-adj.c (combine_stack_adjustments_for_block): Likewise.
	* combine.c (simplify_set, make_extraction, simplify_shift_const_1)
	(gen_lowpart_for_combine): Likewise.
	* convert.c (convert_to_integer_1): Likewise.
	* cse.c (equiv_constant, cse_insn): Likewise.
	* cselib.c (autoinc_split, cselib_hash_rtx): Likewise.
	(cselib_subst_to_values): Likewise.
	* dce.c (word_dce_process_block): Likewise.
	* df-problems.c (df_word_lr_mark_ref): Likewise.
	* dwarf2cfi.c (init_one_dwarf_reg_size): Likewise.
	* dwarf2out.c (multiple_reg_loc_descriptor, mem_loc_descriptor)
	(concat_loc_descriptor, concatn_loc_descriptor, loc_descriptor)
	(rtl_for_decl_location): Likewise.
	* emit-rtl.c (gen_highpart, widen_memory_access): Likewise.
	* expmed.c (extract_bit_field_1, extract_integral_bit_field): Likewise.
	* expr.c (emit_group_load_1, clear_storage_hints): Likewise.
	(emit_move_complex, emit_move_multi_word, emit_push_insn): Likewise.
	(expand_expr_real_1): Likewise.
	* function.c (assign_parm_setup_block_p, assign_parm_setup_block)
	(pad_below): Likewise.
	* gimple-fold.c (optimize_atomic_compare_exchange_p): Likewise.
	* gimple-ssa-store-merging.c (rhs_valid_for_store_merging_p): Likewise.
	* ira.c (get_subreg_tracking_sizes): Likewise.
	* ira-build.c (ira_create_allocno_objects): Likewise.
	* ira-color.c (coalesced_pseudo_reg_slot_compare): Likewise.
	(ira_sort_regnos_for_alter_reg): Likewise.
	* ira-costs.c (record_operand_costs): Likewise.
	* lower-subreg.c (interesting_mode_p, simplify_gen_subreg_concatn)
	(resolve_simple_move): Likewise.
	* lra-constraints.c (get_reload_reg, operands_match_p): Likewise.
	(process_addr_reg, simplify_operand_subreg, curr_insn_transform)
	(lra_constraints): Likewise.
	(CONST_POOL_OK_P): Reject variable-sized modes.
	* lra-spills.c (slot, assign_mem_slot, pseudo_reg_slot_compare)
	(add_pseudo_to_slot, lra_spill): Likewise.
	* omp-low.c (omp_clause_aligned_alignment): Likewise.
	* optabs-query.c (get_best_extraction_insn): Likewise.
	* optabs-tree.c (expand_vec_cond_expr_p): Likewise.
	* optabs.c (expand_vec_perm_var, expand_vec_cond_expr): Likewise.
	(expand_mult_highpart, valid_multiword_target_p): Likewise.
	* recog.c (offsettable_address_addr_space_p): Likewise.
	* regcprop.c (maybe_mode_change): Likewise.
	* reginfo.c (choose_hard_reg_mode, record_subregs_of_mode): Likewise.
	* regrename.c (build_def_use): Likewise.
	* regstat.c (dump_reg_info): Likewise.
	* reload.c (complex_word_subreg_p, push_reload, find_dummy_reload)
	(find_reloads, find_reloads_subreg_address): Likewise.
	* reload1.c (eliminate_regs_1): Likewise.
	* rtlanal.c (for_each_inc_dec_find_inc_dec, rtx_cost): Likewise.
	* simplify-rtx.c (avoid_constant_pool_reference): Likewise.
	(simplify_binary_operation_1, simplify_subreg): Likewise.
	* targhooks.c (default_function_arg_padding): Likewise.
	(default_hard_regno_nregs, default_class_max_nregs): Likewise.
	* tree-cfg.c (verify_gimple_assign_binary): Likewise.
	(verify_gimple_assign_ternary): Likewise.
	* tree-inline.c (estimate_move_cost): Likewise.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-ssa-loop-ivopts.c (add_autoinc_candidates): Likewise.
	(get_address_cost_ainc): Likewise.
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Likewise.
	(vect_supportable_dr_alignment): Likewise.
	* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
	(vectorizable_reduction): Likewise.
	* tree-vect-stmts.c (vectorizable_assignment, vectorizable_shift)
	(vectorizable_operation, vectorizable_load): Likewise.
	* tree.c (build_same_sized_truth_vector_type): Likewise.
	* valtrack.c (cleanup_auto_inc_dec): Likewise.
	* var-tracking.c (emit_note_insn_var_location): Likewise.
	* config/arc/arc.h (ASM_OUTPUT_CASE_END): Use as_a <scalar_int_mode>.
	(ADDR_VEC_ALIGN): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_to_bits): Return a poly_uint16 rather than an
	unsigned short.
	(GET_MODE_BITSIZE): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is polynomial.
	* calls.c (shift_return_value): Treat GET_MODE_BITSIZE as polynomial.
	* combine.c (make_extraction): Likewise.
	* dse.c (find_shift_sequence): Likewise.
	* dwarf2out.c (mem_loc_descriptor): Likewise.
	* expmed.c (store_integral_bit_field, extract_bit_field_1): Likewise.
	(extract_bit_field, extract_low_bits): Likewise.
	* expr.c (convert_move, convert_modes, emit_move_insn_1): Likewise.
	(optimize_bitfield_assignment_op, expand_assignment): Likewise.
	(store_expr_with_bounds, store_field, expand_expr_real_1): Likewise.
	* fold-const.c (optimize_bit_field_compare, merge_ranges): Likewise.
	* gimple-fold.c (optimize_atomic_compare_exchange_p): Likewise.
	* reload.c (find_reloads): Likewise.
	* reload1.c (alter_reg): Likewise.
	* stor-layout.c (bitwise_mode_for_mode, compute_record_mode): Likewise.
	* targhooks.c (default_secondary_memory_needed_mode): Likewise.
	* tree-if-conv.c (predicate_mem_writes): Likewise.
	* tree-ssa-strlen.c (handle_builtin_memcmp): Likewise.
	* tree-vect-patterns.c (adjust_bool_pattern): Likewise.
	* tree-vect-stmts.c (vectorizable_simd_clone_call): Likewise.
	* valtrack.c (dead_debug_insert_temp): Likewise.
	* varasm.c (mergeable_constant_section): Likewise.
	* config/sh/sh.h (LOCAL_ALIGNMENT): Use as_a <fixed_size_mode>.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_assignment): Cope with polynomial mode sizes
	when assigning to a CONCAT.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_precision): Change from unsigned short to
	poly_uint16_pod.
	(mode_to_precision): Return a poly_uint16 rather than an unsigned
	short.
	(GET_MODE_PRECISION): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is not polynomial.
	(HWI_COMPUTABLE_MODE_P): Turn into a function.  Optimize the case
	in which the mode is already known to be a scalar_int_mode.
	* genmodes.c (emit_mode_precision): Change the type of mode_precision
	from unsigned short to poly_uint16_pod.  Use ZERO_COEFFS for the
	initializer.
	* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
	for GET_MODE_PRECISION.
	* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
	for GET_MODE_PRECISION.
	* combine.c (update_rsp_from_reg_equal): Treat GET_MODE_PRECISION
	as polynomial.
	(try_combine, find_split_point, combine_simplify_rtx): Likewise.
	(expand_field_assignment, make_extraction): Likewise.
	(make_compound_operation_int, record_dead_and_set_regs_1): Likewise.
	(get_last_value): Likewise.
	* convert.c (convert_to_integer_1): Likewise.
	* cse.c (cse_insn): Likewise.
	* expr.c (expand_expr_real_1): Likewise.
	* lra-constraints.c (simplify_operand_subreg): Likewise.
	* optabs-query.c (can_atomic_load_p): Likewise.
	* optabs.c (expand_atomic_load): Likewise.
	(expand_atomic_store): Likewise.
	* ree.c (combine_reaching_defs): Likewise.
	* rtl.h (partial_subreg_p, paradoxical_subreg_p): Likewise.
	* rtlanal.c (nonzero_bits1, lsb_bitfield_op_p): Likewise.
	* tree.h (type_has_mode_precision_p): Likewise.
	* ubsan.c (instrument_si_overflow): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree.h (TYPE_VECTOR_SUBPARTS): Turn into a function and handle
	polynomial numbers of units.
	(SET_TYPE_VECTOR_SUBPARTS): Likewise.
	(valid_vector_subparts_p): New function.
	(build_vector_type): Remove temporary shim and take the number
	of units as a poly_uint64 rather than an int.
	(build_opaque_vector_type): Take the number of units as a
	poly_uint64 rather than an int.
	* tree.c (build_vector_from_ctor): Handle polynomial
	TYPE_VECTOR_SUBPARTS.
	(type_hash_canon_hash, type_cache_hasher::equal): Likewise.
	(uniform_vector_p, vector_type_mode, build_vector): Likewise.
	(build_vector_from_val): If the number of units is variable,
	use build_vec_duplicate_cst for constant operands and
	VEC_DUPLICATE_EXPR otherwise.
	(make_vector_type): Remove temporary is_constant ().
	(build_vector_type, build_opaque_vector_type): Take the number of
	units as a poly_uint64 rather than an int.
	(check_vector_cst): Handle polynomial TYPE_VECTOR_SUBPARTS and
	VECTOR_CST_NELTS.
	* cfgexpand.c (expand_debug_expr): Likewise.
	* expr.c (count_type_elements, categorize_ctor_elements_1): Likewise.
	(store_constructor, expand_expr_real_1): Likewise.
	(const_scalar_mask_from_tree): Likewise.
	* fold-const-call.c (fold_const_reduction): Likewise.
	* fold-const.c (const_binop, const_unop, fold_convert_const): Likewise.
	(operand_equal_p, fold_vec_perm, fold_ternary_loc): Likewise.
	(native_encode_vector, vec_cst_ctor_to_array): Likewise.
	(fold_relational_const): Likewise.
	(native_interpret_vector): Likewise.  Change the size from an
	int to an unsigned int.
	* gimple-fold.c (gimple_fold_stmt_to_constant_1): Handle polynomial
	TYPE_VECTOR_SUBPARTS.
	(gimple_fold_indirect_ref, gimple_build_vector): Likewise.
	(gimple_build_vector_from_val): Use VEC_DUPLICATE_EXPR when
	duplicating a non-constant operand into a variable-length vector.
	* hsa-brig.c (hsa_op_immed::emit_to_buffer): Handle polynomial
	TYPE_VECTOR_SUBPARTS and VECTOR_CST_NELTS.
	* ipa-icf.c (sem_variable::equals): Likewise.
	* match.pd: Likewise.
	* omp-simd-clone.c (simd_clone_subparts): Likewise.
	* print-tree.c (print_node): Likewise.
	* stor-layout.c (layout_type): Likewise.
	* targhooks.c (default_builtin_vectorization_cost): Likewise.
	* tree-cfg.c (verify_gimple_comparison): Likewise.
	(verify_gimple_assign_binary): Likewise.
	(verify_gimple_assign_ternary): Likewise.
	(verify_gimple_assign_single): Likewise.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	(simplify_bitfield_ref, is_combined_permutation_identity): Likewise.
	* tree-vect-data-refs.c (vect_permute_store_chain): Likewise.
	(vect_grouped_load_supported, vect_permute_load_chain): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	* tree-vect-generic.c (nunits_for_known_piecewise_op): Likewise.
	(expand_vector_condition, optimize_vector_constructor): Likewise.
	(lower_vec_perm, get_compute_type): Likewise.
	* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
	(get_initial_defs_for_reduction, vect_transform_loop): Likewise.
	* tree-vect-patterns.c (vect_recog_bool_pattern): Likewise.
	(vect_recog_mask_conversion_pattern): Likewise.
	* tree-vect-slp.c (vect_supported_load_permutation_p): Likewise.
	(vect_get_constant_vectors, vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(get_group_load_store_type, vectorizable_mask_load_store): Likewise.
	(vectorizable_bswap, simd_clone_subparts, vectorizable_assignment)
	(vectorizable_shift, vectorizable_operation, vectorizable_store)
	(vectorizable_load, vect_is_simple_cond, vectorizable_comparison)
	(supportable_widening_operation): Likewise.
	(supportable_narrowing_operation): Likewise.
	* tree-vector-builder.c (tree_vector_builder::binary_encoded_nelts):
	Likewise.
	* varasm.c (output_constant): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vect_permute_store_chain): Reorganize
	so that both the length == 3 and length != 3 cases set up their
	own permute vectors.  Add comments explaining why we know the
	number of elements is constant.
	(vect_permute_load_chain): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* machmode.h (mode_nunits): Change from unsigned char to
	poly_uint16_pod.
	(ONLY_FIXED_SIZE_MODES): New macro.
	(pod_mode::measurement_type, scalar_int_mode::measurement_type)
	(scalar_float_mode::measurement_type, scalar_mode::measurement_type)
	(complex_mode::measurement_type, fixed_size_mode::measurement_type):
	New typedefs.
	(mode_to_nunits): Return a poly_uint16 rather than an unsigned short.
	(GET_MODE_NUNITS): Return a constant if ONLY_FIXED_SIZE_MODES,
	or if measurement_type is not polynomial.
	* genmodes.c (ZERO_COEFFS): New macro.
	(emit_mode_nunits_inline): Make mode_nunits_inline return a
	poly_uint16.
	(emit_mode_nunits): Change the type of mode_nunits to poly_uint16_pod.
	Use ZERO_COEFFS when emitting initializers.
	* data-streamer.h (bp_pack_poly_value): New function.
	(bp_unpack_poly_value): Likewise.
	* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
	for GET_MODE_NUNITS.
	* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
	for GET_MODE_NUNITS.
	* tree.c (make_vector_type): Remove temporary shim and make
	the real function take the number of units as a poly_uint64
	rather than an int.
	(build_vector_type_for_mode): Handle polynomial nunits.
	* dwarf2out.c (loc_descriptor, add_const_value_attribute): Likewise.
	* emit-rtl.c (const_vec_series_p_1): Likewise.
	(gen_rtx_CONST_VECTOR): Likewise.
	* fold-const.c (test_vec_duplicate_folding): Likewise.
	* genrecog.c (validate_pattern): Likewise.
	* optabs-query.c (can_vec_perm_var_p, can_mult_highpart_p): Likewise.
	* optabs-tree.c (expand_vec_cond_expr_p): Likewise.
	* optabs.c (expand_vector_broadcast, expand_binop_directly): Likewise.
	(shift_amt_for_vec_perm_mask, expand_vec_perm_var): Likewise.
	(expand_vec_cond_expr, expand_mult_highpart): Likewise.
	* rtlanal.c (subreg_get_info): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Likewise.
	(vect_grouped_load_supported): Likewise.
	* tree-vect-generic.c (type_for_widest_vector_mode): Likewise.
	* tree-vect-loop.c (have_whole_vector_shift): Likewise.
	* simplify-rtx.c (simplify_unary_operation_1): Likewise.
	(simplify_const_unary_operation, simplify_binary_operation_1)
	(simplify_const_binary_operation, simplify_ternary_operation)
	(test_vector_ops_duplicate, test_vector_ops): Likewise.
	(simplify_immed_subreg): Use GET_MODE_NUNITS on a fixed_size_mode
	instead of CONST_VECTOR_NUNITS.
	* varasm.c (output_constant_pool_2): Likewise.
	* rtx-vector-builder.c (rtx_vector_builder::build): Only include the
	explicit-encoded elements in the XVEC for variable-length vectors.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* lra-constraints.c (curr_insn_transform): Use partial_subreg_p.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* coretypes.h (fixed_size_mode): Declare.
	(fixed_size_mode_pod): New typedef.
	* builtins.h (target_builtins::x_apply_args_mode)
	(target_builtins::x_apply_result_mode): Change type to
	fixed_size_mode_pod.
	* builtins.c (apply_args_size, apply_result_size, result_vector)
	(expand_builtin_apply_args_1, expand_builtin_apply)
	(expand_builtin_return): Update accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* cse.c (hash_rtx_cb): Hash only the encoded elements.
	* cselib.c (cselib_hash_rtx): Likewise.
	* expmed.c (make_tree): Build VECTOR_CSTs directly from the
	CONST_VECTOR encoding.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>
	    Jeff Law  <law@redhat.com>

	PR target/83641
	* config/i386/i386.c (ix86_adjust_stack_and_probe_stack_clash): For
	noreturn probe, use gen_pop instead of ix86_emit_restore_reg_using_pop,
	only set RTX_FRAME_RELATED_P on both the push and pop if cfa_reg is sp
	and add REG_CFA_ADJUST_CFA notes in that case to both insns.

	PR target/83641
	* config/i386/i386.c (ix86_adjust_stack_and_probe_stack_clash): Do not
	explicitly probe *sp in a noreturn function if there were any callee
	register saves or frame pointer is needed.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>

	PR debug/83621
	* cfgexpand.c (expand_debug_expr): Return NULL if mode is
	BLKmode for ternary, binary or unary expressions.

	PR debug/83645
	* var-tracking.c (delete_vta_debug_insn): New inline function.
	(delete_vta_debug_insns): Add USE_CFG argument, if true, walk just
	insns from get_insns () to NULL instead of each bb separately.
	Use delete_vta_debug_insn.  No longer static.
	(vt_debug_insns_local, variable_tracking_main_1): Adjust
	delete_vta_debug_insns callers.
	* rtl.h (delete_vta_debug_insns): Declare.
	* final.c (rest_of_handle_final): Call delete_vta_debug_insns
	instead of variable_tracking_main.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83603
	* calls.c (maybe_warn_nonstring_arg): Avoid accessing function
	arguments past the endof the argument list in functions declared
	without a prototype.
	* gimple-ssa-warn-restrict.c (wrestrict_dom_walker::check_call):
	Avoid checking when arguments are null.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	PR c/83559
	* doc/extend.texi (attribute const): Fix a typo.
	* ipa-pure-const.c ((warn_function_const, warn_function_pure): Avoid
	issuing -Wsuggest-attribute for void functions.

2018-01-03  Martin Sebor  <msebor@redhat.com>

	* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): Use
	offset_int::from instead of wide_int::to_shwi.
	(maybe_diag_overlap): Remove assertion.
	Use HOST_WIDE_INT_PRINT_DEC instead of %lli.
	* gimple-ssa-sprintf.c (format_directive): Same.
	(parse_directive): Same.
	(sprintf_dom_walker::compute_format_length): Same.
	(try_substitute_return_value): Same.

2018-01-03  Jeff Law  <law@redhat.com>

	PR middle-end/83654
	* explow.c (anti_adjust_stack_and_probe_stack_clash): Test a
	non-constant residual for zero at runtime and avoid probing in
	that case.  Reorganize code for trailing problem to mirror handling
	of the residual.

2018-01-03  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/83501
	* tree-ssa-strlen.c (get_string_cst): New.
	(handle_char_store): Call get_string_cst.

2018-01-03  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/83593
	* tree-ssa-strlen.c: Include tree-cfg.h.
	(strlen_check_and_optimize_stmt): Add new argument cleanup_eh.
	(strlen_dom_walker): Add new member variable m_cleanup_cfg.
	(strlen_dom_walker::strlen_dom_walker): Initialize m_cleanup_cfg
	to false.
	(strlen_dom_walker::before_dom_children): Call
	gimple_purge_dead_eh_edges. Dump tranformation with details
	dump flags.
	(strlen_dom_walker::before_dom_children): Update call by adding
	new argument cleanup_eh.
	(pass_strlen::execute): Return TODO_cleanup_cfg if needed.

2018-01-03  Martin Liska  <mliska@suse.cz>

	PR ipa/83549
	* cif-code.def (VARIADIC_THUNK): New enum value.
	* ipa-fnsummary.c (compute_fn_summary): Do not inline variadic
	thunks.

2018-01-03  Jan Beulich  <jbeulich@suse.com>

	* sse.md (mov<mode>_internal): Tighten condition for when to use
	vmovdqu<ssescalarsize> for TI and OI modes.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>

	Update copyright years.

2018-01-03  Martin Liska  <mliska@suse.cz>

	PR ipa/83594
	* ipa-visibility.c (function_and_variable_visibility): Skip
	functions with noipa attribure.

2018-01-03  Jakub Jelinek  <jakub@redhat.com>

	* gcc.c (process_command): Update copyright notice dates.
	* gcov-dump.c (print_version): Ditto.
	* gcov.c (print_version): Ditto.
	* gcov-tool.c (print_version): Ditto.
	* gengtype.c (create_file): Ditto.
	* doc/cpp.texi: Bump @copying's copyright year.
	* doc/cppinternals.texi: Ditto.
	* doc/gcc.texi: Ditto.
	* doc/gccint.texi: Ditto.
	* doc/gcov.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/invoke.texi: Ditto.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* vector-builder.h (vector_builder::m_full_nelts): Change from
	unsigned int to poly_uint64.
	(vector_builder::full_nelts): Update prototype accordingly.
	(vector_builder::new_vector): Likewise.
	(vector_builder::encoded_full_vector_p): Handle polynomial full_nelts.
	(vector_builder::operator ==): Likewise.
	(vector_builder::finalize): Likewise.
	* int-vector-builder.h (int_vector_builder::int_vector_builder):
	Take the number of elements as a poly_uint64 rather than an
	unsigned int.
	* vec-perm-indices.h (vec_perm_indices::m_nelts_per_input): Change
	from unsigned int to poly_uint64.
	(vec_perm_indices::vec_perm_indices): Update prototype accordingly.
	(vec_perm_indices::new_vector): Likewise.
	(vec_perm_indices::length): Likewise.
	(vec_perm_indices::nelts_per_input): Likewise.
	(vec_perm_indices::input_nelts): Likewise.
	* vec-perm-indices.c (vec_perm_indices::new_vector): Take the
	number of elements per input as a poly_uint64 rather than an
	unsigned int.  Use the original encoding for variable-length
	vectors, rather than clamping each individual element.
	For the second and subsequent elements in each pattern,
	clamp the step and base before clamping their sum.
	(vec_perm_indices::series_p): Handle polynomial element counts.
	(vec_perm_indices::all_in_range_p): Likewise.
	(vec_perm_indices_to_tree): Likewise.
	(vec_perm_indices_to_rtx): Likewise.
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Likewise.
	* tree-vector-builder.c (tree_vector_builder::new_unary_operation)
	(tree_vector_builder::new_binary_operation): Handle polynomial
	element counts.  Return false if we need to know the number
	of elements at compile time.
	* fold-const.c (fold_vec_perm): Punt if the number of elements
	isn't known at compile time.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* vec-perm-indices.h (vec_perm_builder): Change element type
	from HOST_WIDE_INT to poly_int64.
	(vec_perm_indices::element_type): Update accordingly.
	(vec_perm_indices::clamp): Handle polynomial element_types.
	* vec-perm-indices.c (vec_perm_indices::series_p): Likewise.
	(vec_perm_indices::all_in_range_p): Likewise.
	(tree_to_vec_perm_builder): Check for poly_int64 trees rather
	than shwi trees.
	* vector-builder.h (vector_builder::stepped_sequence_p): Handle
	polynomial vec_perm_indices element types.
	* int-vector-builder.h (int_vector_builder::equal_p): Likewise.
	* fold-const.c (fold_vec_perm): Likewise.
	* optabs.c (shift_amt_for_vec_perm_mask): Likewise.
	* tree-vect-generic.c (lower_vec_perm): Likewise.
	* tree-vect-slp.c (vect_transform_slp_perm_load): Likewise.
	* config/aarch64/aarch64.c (aarch64_evpc_tbl): Cast d->perm
	element type to HOST_WIDE_INT.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* alias.c (addr_side_effect_eval): Take the size as a poly_int64
	rather than an int.  Use plus_constant.
	(memrefs_conflict_p): Take the sizes as poly_int64s rather than ints.
	Take the offset "c" as a poly_int64 rather than a HOST_WIDE_INT.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* calls.c (emit_call_1, expand_call): Change struct_value_size from
	a HOST_WIDE_INT to a poly_int64.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* calls.c (load_register_parameters): Cope with polynomial
	mode sizes.  Require a constant size for BLKmode parameters
	that aren't described by a PARALLEL.  If BLOCK_REG_PADDING
	forces a parameter to be padded at the lsb end in order to
	fill a complete number of words, require the parameter size
	to be ordered wrt UNITS_PER_WORD.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* reload1.c (spill_stack_slot_width): Change element type
	from unsigned int to poly_uint64_pod.
	(alter_reg): Treat mode sizes as polynomial.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* reload.c (complex_word_subreg_p): New function.
	(reload_inner_reg_of_subreg, push_reload): Use it.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* lra-constraints.c (process_alt_operands): Reject matched
	operands whose sizes aren't ordered.
	(match_reload): Refer to this check here.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* builtins.c (expand_ifn_atomic_compare_exchange_into_call): Assert
	that the mode size is in the set {1, 2, 4, 8, 16}.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* var-tracking.c (adjust_mems): Treat mode sizes as polynomial.
	Use plus_constant instead of gen_rtx_PLUS.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* config/cr16/cr16-protos.h (cr16_push_rounding): Declare.
	* config/cr16/cr16.h (PUSH_ROUNDING): Move implementation to...
	* config/cr16/cr16.c (cr16_push_rounding): ...this new function.
	* config/h8300/h8300-protos.h (h8300_push_rounding): Declare.
	* config/h8300/h8300.h (PUSH_ROUNDING): Move implementation to...
	* config/h8300/h8300.c (h8300_push_rounding): ...this new function.
	* config/i386/i386-protos.h (ix86_push_rounding): Declare.
	* config/i386/i386.h (PUSH_ROUNDING): Move implementation to...
	* config/i386/i386.c (ix86_push_rounding): ...this new function.
	* config/m32c/m32c-protos.h (m32c_push_rounding): Take and return
	a poly_int64.
	* config/m32c/m32c.c (m32c_push_rounding): Likewise.
	* config/m68k/m68k-protos.h (m68k_push_rounding): Declare.
	* config/m68k/m68k.h (PUSH_ROUNDING): Move implementation to...
	* config/m68k/m68k.c (m68k_push_rounding): ...this new function.
	* config/pdp11/pdp11-protos.h (pdp11_push_rounding): Declare.
	* config/pdp11/pdp11.h (PUSH_ROUNDING): Move implementation to...
	* config/pdp11/pdp11.c (pdp11_push_rounding): ...this new function.
	* config/stormy16/stormy16-protos.h (xstormy16_push_rounding): Declare.
	* config/stormy16/stormy16.h (PUSH_ROUNDING): Move implementation to...
	* config/stormy16/stormy16.c (xstormy16_push_rounding): ...this new
	function.
	* expr.c (emit_move_resolve_push): Treat the input and result
	of PUSH_ROUNDING as a poly_int64.
	(emit_move_complex_push, emit_single_push_insn_1): Likewise.
	(emit_push_insn): Likewise.
	* lra-eliminations.c (mark_not_eliminable): Likewise.
	* recog.c (push_operand): Likewise.
	* reload1.c (elimination_effects): Likewise.
	* rtlanal.c (nonzero_bits1): Likewise.
	* calls.c (store_one_arg): Likewise.  Require the padding to be
	known at compile time.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (emit_single_push_insn_1): Treat mode sizes as polynomial.
	Use plus_constant instead of gen_rtx_PLUS.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* auto-inc-dec.c (set_inc_state): Take the mode size as a poly_int64
	rather than an int.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_expr_real_1): Use tree_to_poly_uint64
	instead of int_size_in_bytes when handling VIEW_CONVERT_EXPRs
	via stack temporaries.  Treat the mode size as polynomial too.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* expr.c (expand_expr_real_2): When handling conversions involving
	unions, apply tree_to_poly_uint64 to the TYPE_SIZE rather than
	multiplying int_size_in_bytes by BITS_PER_UNIT.  Treat GET_MODE_BISIZE
	as a poly_uint64 too.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* rtlanal.c (subreg_get_info): Handle polynomial mode sizes.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* combine.c (can_change_dest_mode): Handle polynomial
	REGMODE_NATURAL_SIZE.
	* expmed.c (store_bit_field_1): Likewise.
	* expr.c (store_constructor): Likewise.
	* emit-rtl.c (validate_subreg): Operate on polynomial mode sizes
	and polynomial REGMODE_NATURAL_SIZE.
	(gen_lowpart_common): Likewise.
	* reginfo.c (record_subregs_of_mode): Likewise.
	* rtlanal.c (read_modify_subreg_p): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* internal-fn.c (expand_vector_ubsan_overflow): Handle polynomial
	numbers of elements.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* match.pd: Cope with polynomial numbers of vector elements.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* fold-const.c (fold_indirect_ref_1): Handle polynomial offsets
	in a POINTER_PLUS_EXPR.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* omp-simd-clone.c (simd_clone_subparts): New function.
	(simd_clone_init_simd_arrays): Use it instead of TYPE_VECTOR_SUBPARTS.
	(ipa_simd_modify_function_body): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-generic.c (nunits_for_known_piecewise_op): New function.
	(expand_vector_piecewise): Use it instead of TYPE_VECTOR_SUBPARTS.
	(expand_vector_addition, add_rshift, expand_vector_divmod): Likewise.
	(expand_vector_condition, vector_element): Likewise.
	(subparts_gt): New function.
	(get_compute_type): Use subparts_gt.
	(count_type_subparts): Delete.
	(expand_vector_operations_1): Use subparts_gt instead of
	count_type_subparts.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vect_no_alias_p): Replace with...
	(vect_compile_time_alias): ...this new function.  Do the calculation
	on poly_ints rather than trees.
	(vect_prune_runtime_alias_test_list): Update call accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c (vect_build_slp_tree_1): Handle polynomial
	numbers of units.
	(vect_schedule_slp_instance): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Reject
	constant and extern definitions for variable-length vectors.
	(vect_get_constant_vectors): Note that the number of units
	is known to be constant.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (vectorizable_conversion): Treat the number
	of units as polynomial.  Choose between WIDE and NARROW based
	on multiple_p.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (simd_clone_subparts): New function.
	(vectorizable_simd_clone_call): Use it instead of TYPE_VECTOR_SUBPARTS.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (vectorizable_call): Treat the number of
	vectors as polynomial.  Use build_index_vector for
	IFN_GOMP_SIMD_LANE.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-stmts.c (get_load_store_type): Treat the number of
	units as polynomial.  Reject VMAT_ELEMENTWISE and VMAT_STRIDED_SLP
	for variable-length vectors.
	(vectorizable_mask_load_store): Treat the number of units as
	polynomial, asserting that it is constant if the condition has
	already been enforced.
	(vectorizable_store, vectorizable_load): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop.c (vectorizable_live_operation): Treat the number
	of units as polynomial.  Punt if we can't tell at compile time
	which vector contains the final result.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-loop.c (vectorizable_induction): Treat the number
	of units as polynomial.  Punt on SLP inductions.  Use an integer
	VEC_SERIES_EXPR for variable-length integer reductions.  Use a
	cast of such a series for variable-length floating-point
	reductions.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree.h (build_index_vector): Declare.
	* tree.c (build_index_vector): New function.
	* tree-vect-loop.c (get_initial_defs_for_reduction): Treat the number
	of units as polynomial, forcibly converting it to a constant if
	vectorizable_reduction has already enforced the condition.
	(vect_create_epilog_for_reduction): Likewise.  Use build_index_vector
	to create a {1,2,3,...} vector.
	(vectorizable_reduction): Treat the number of units as polynomial.
	Choose vectype_in based on the largest scalar element size rather
	than the smallest number of units.  Enforce the restrictions
	relied on above.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-data-refs.c (vector_alignment_reachable_p): Treat the
	number of units as polynomial.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.h (vector_sizes, auto_vector_sizes): New typedefs.
	* target.def (autovectorize_vector_sizes): Return the vector sizes
	by pointer, using vector_sizes rather than a bitmask.
	* targhooks.h (default_autovectorize_vector_sizes): Update accordingly.
	* targhooks.c (default_autovectorize_vector_sizes): Likewise.
	* config/aarch64/aarch64.c (aarch64_autovectorize_vector_sizes):
	Likewise.
	* config/arc/arc.c (arc_autovectorize_vector_sizes): Likewise.
	* config/arm/arm.c (arm_autovectorize_vector_sizes): Likewise.
	* config/i386/i386.c (ix86_autovectorize_vector_sizes): Likewise.
	* config/mips/mips.c (mips_autovectorize_vector_sizes): Likewise.
	* omp-general.c (omp_max_vf): Likewise.
	* omp-low.c (omp_clause_aligned_alignment): Likewise.
	* optabs-query.c (can_vec_mask_load_store_p): Likewise.
	* tree-vect-loop.c (vect_analyze_loop): Likewise.
	* tree-vect-slp.c (vect_slp_bb): Likewise.
	* doc/tm.texi: Regenerate.
	* tree-vectorizer.h (current_vector_size): Change from an unsigned int
	to a poly_uint64.
	* tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): Take
	the vector size as a poly_uint64 rather than an unsigned int.
	(current_vector_size): Change from an unsigned int to a poly_uint64.
	(get_vectype_for_scalar_type): Update accordingly.
	* tree.h (build_truth_vector_type): Take the size and number of
	units as a poly_uint64 rather than an unsigned int.
	(build_vector_type): Add a temporary overload that takes
	the number of units as a poly_uint64 rather than an unsigned int.
	* tree.c (make_vector_type): Likewise.
	(build_truth_vector_type): Take the number of units as a poly_uint64
	rather than an unsigned int.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* target.def (get_mask_mode): Take the number of units and length
	as poly_uint64s rather than unsigned ints.
	* targhooks.h (default_get_mask_mode): Update accordingly.
	* targhooks.c (default_get_mask_mode): Likewise.
	* config/i386/i386.c (ix86_get_mask_mode): Likewise.
	* doc/tm.texi: Regenerate.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* omp-general.h (omp_max_vf): Return a poly_uint64 instead of an int.
	* omp-general.c (omp_max_vf): Likewise.
	* omp-expand.c (omp_adjust_chunk_size): Update call to omp_max_vf.
	(expand_omp_simd): Handle polynomial safelen.
	* omp-low.c (omplow_simd_context): Add a default constructor.
	(omplow_simd_context::max_vf): Change from int to poly_uint64.
	(lower_rec_simd_input_clauses): Update accordingly.
	(lower_rec_input_clauses): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (vect_nunits_for_cost): New function.
	* tree-vect-loop.c (vect_model_reduction_cost): Use it.
	* tree-vect-slp.c (vect_analyze_slp_cost_1): Likewise.
	(vect_analyze_slp_cost): Likewise.
	* tree-vect-stmts.c (vect_model_store_cost): Likewise.
	(vect_model_load_cost): Likewise.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vect-slp.c (vect_record_max_nunits, vect_build_slp_tree_1)
	(vect_build_slp_tree_2, vect_build_slp_tree): Change max_nunits
	from an unsigned int * to a poly_uint64_pod *.
	(calculate_unrolling_factor): New function.
	(vect_analyze_slp_instance): Use it.  Track polynomial max_nunits.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* tree-vectorizer.h (_slp_instance::unrolling_factor): Change
	from an unsigned int to a poly_uint64.
	(_loop_vec_info::slp_unrolling_factor): Likewise.
	(_loop_vec_info::vectorization_factor): Change from an int
	to a poly_uint64.
	(MAX_VECTORIZATION_FACTOR): Bump from 64 to INT_MAX.
	(vect_get_num_vectors): New function.
	(vect_update_max_nunits, vect_vf_for_cost): Likewise.
	(vect_get_num_copies): Use vect_get_num_vectors.
	(vect_analyze_data_ref_dependences): Change max_vf from an int *
	to an unsigned int *.
	(vect_analyze_data_refs): Change min_vf from an int * to a
	poly_uint64 *.
	(vect_transform_slp_perm_load): Take the vf as a poly_uint64 rather
	than an unsigned HOST_WIDE_INT.
	* tree-vect-data-refs.c (vect_analyze_possibly_independent_ddr)
	(vect_analyze_data_ref_dependence): Change max_vf from an int *
	to an unsigned int *.
	(vect_analyze_data_ref_dependences): Likewise.
	(vect_compute_data_ref_alignment): Handle polynomial vf.
	(vect_enhance_data_refs_alignment): Likewise.
	(vect_prune_runtime_alias_test_list): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	(vect_supportable_dr_alignment): Likewise.
	(dependence_distance_ge_vf): Take the vectorization factor as a
	poly_uint64 rather than an unsigned HOST_WIDE_INT.
	(vect_analyze_data_refs): Change min_vf from an int * to a
	poly_uint64 *.
	* tree-vect-loop-manip.c (vect_gen_scalar_loop_niters): Take
	vfm1 as a poly_uint64 rather than an int.  Make the same change
	for the returned bound_scalar.
	(vect_gen_vector_loop_niters): Handle polynomial vf.
	(vect_do_peeling): Likewise.  Update call to
	vect_gen_scalar_loop_niters and handle polynomial bound_scalars.
	(vect_gen_vector_loop_niters_mult_vf): Assert that the vf must
	be constant.
	* tree-vect-loop.c (vect_determine_vectorization_factor)
	(vect_update_vf_for_slp, vect_analyze_loop_2): Handle polynomial vf.
	(vect_get_known_peeling_cost): Likewise.
	(vect_estimate_min_profitable_iters, vectorizable_reduction): Likewise.
	(vect_worthwhile_without_simd_p, vectorizable_induction): Likewise.
	(vect_transform_loop): Likewise.  Use the lowest possible VF when
	updating the upper bounds of the loop.
	(vect_min_worthwhile_factor): Make static.  Return an unsigned int
	rather than an int.
	* tree-vect-slp.c (vect_attempt_slp_rearrange_stmts): Cope with
	polynomial unroll factors.
	(vect_analyze_slp_cost_1, vect_analyze_slp_instance): Likewise.
	(vect_make_slp_decision): Likewise.
	(vect_supported_load_permutation_p): Likewise, and polynomial
	vf too.
	(vect_analyze_slp_cost): Handle polynomial vf.
	(vect_slp_analyze_node_operations): Likewise.
	(vect_slp_analyze_bb_1): Likewise.
	(vect_transform_slp_perm_load): Take the vf as a poly_uint64 rather
	than an unsigned HOST_WIDE_INT.
	* tree-vect-stmts.c (vectorizable_simd_clone_call, vectorizable_store)
	(vectorizable_load): Handle polynomial vf.
	* tree-vectorizer.c (simduid_to_vf::vf): Change from an int to
	a poly_uint64.
	(adjust_simduid_builtins, shrink_simd_arrays): Update accordingly.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* match.pd: Handle bit operations involving three constants
	and try to fold one pair.

2018-01-03  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-vect-loop-manip.c: Include gimple-fold.h.
	(slpeel_make_loop_iterate_ntimes): Add step, final_iv and
	niters_maybe_zero parameters.  Handle other cases besides a step of 1.
	(vect_gen_vector_loop_niters): Add a step_vector_ptr parameter.
	Add a path that uses a step of VF instead of 1, but disable it
	for now.
	(vect_do_peeling): Add step_vector, niters_vector_mult_vf_var
	and niters_no_overflow parameters.  Update calls to
	slpeel_make_loop_iterate_ntimes and vect_gen_vector_loop_niters.
	Create a new SSA name if the latter choses to use a ste other
	than zero, and return it via niters_vector_mult_vf_var.
	* tree-vect-loop.c (vect_transform_loop): Update calls to
	vect_do_peeling, vect_gen_vector_loop_niters and
	slpeel_make_loop_iterate_ntimes.
	* tree-vectorizer.h (slpeel_make_loop_iterate_ntimes, vect_do_peeling)
	(vect_gen_vector_loop_niters): Update declarations after above changes.

2018-01-02  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.md (floor<mode>2): Add support for IEEE
	128-bit round to integer instructions.
	(ceil<mode>2): Likewise.
	(btrunc<mode>2): Likewise.
	(round<mode>2): Likewise.

2018-01-02  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* config/rs6000/rs6000-string.c (expand_block_move): Allow the use of
	unaligned VSX load/store on P8/P9.
	(expand_block_clear): Allow the use of unaligned VSX
	load/store on P8/P9.

2018-01-02  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	* config/rs6000/rs6000-p8swap.c (swap_feeds_both_load_and_store):
	New function.
	(rs6000_analyze_swaps): Mark a web unoptimizable if it contains a
	swap associated with both a load and a store.

2018-01-02  Andrew Waterman  <andrew@sifive.com>

	* config/riscv/linux.h (ICACHE_FLUSH_FUNC): New.
	* config/riscv/riscv.md (clear_cache): Use it.

2018-01-02  Artyom Skrobov  <tyomitch@gmail.com>

	* web.c: Remove out-of-date comment.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* expr.c (fixup_args_size_notes): Check that any existing
	REG_ARGS_SIZE notes are correct, and don't try to re-add them.
	(emit_single_push_insn_1): Move stack_pointer_delta adjustment to...
	(emit_single_push_insn): ...here.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* rtl.h (CONST_VECTOR_ELT): Redefine to const_vector_elt.
	(const_vector_encoded_nelts): New function.
	(CONST_VECTOR_NUNITS): Redefine to use GET_MODE_NUNITS.
	(const_vector_int_elt, const_vector_elt): Declare.
	* emit-rtl.c (const_vector_int_elt_1): New function.
	(const_vector_elt): Likewise.
	* simplify-rtx.c (simplify_immed_subreg): Avoid taking the address
	of CONST_VECTOR_ELT.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* expr.c: Include rtx-vector-builder.h.
	(const_vector_mask_from_tree): Use rtx_vector_builder and operate
	directly on the tree encoding.
	(const_vector_from_tree): Likewise.
	* optabs.c: Include rtx-vector-builder.h.
	(expand_vec_perm_var): Use rtx_vector_builder and create a repeating
	sequence of "u" values.
	* vec-perm-indices.c: Include rtx-vector-builder.h.
	(vec_perm_indices_to_rtx): Use rtx_vector_builder and operate
	directly on the vec_perm_indices encoding.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* doc/rtl.texi (const_vector): Describe new encoding scheme.
	* Makefile.in (OBJS): Add rtx-vector-builder.o.
	* rtx-vector-builder.h: New file.
	* rtx-vector-builder.c: Likewise.
	* rtl.h (rtx_def::u2): Add a const_vector field.
	(CONST_VECTOR_NPATTERNS): New macro.
	(CONST_VECTOR_NELTS_PER_PATTERN): Likewise.
	(CONST_VECTOR_DUPLICATE_P): Likewise.
	(CONST_VECTOR_STEPPED_P): Likewise.
	(CONST_VECTOR_ENCODED_ELT): Likewise.
	(const_vec_duplicate_p): Check for a duplicated vector encoding.
	(unwrap_const_vec_duplicate): Likewise.
	(const_vec_series_p): Check for a non-duplicated vector encoding.
	Say that the function only returns true for integer vectors.
	* emit-rtl.c: Include rtx-vector-builder.h.
	(gen_const_vec_duplicate_1): Delete.
	(gen_const_vector): Call gen_const_vec_duplicate instead of
	gen_const_vec_duplicate_1.
	(const_vec_series_p_1): Operate directly on the CONST_VECTOR encoding.
	(gen_const_vec_duplicate): Use rtx_vector_builder.
	(gen_const_vec_series): Likewise.
	(gen_rtx_CONST_VECTOR): Likewise.
	* config/powerpcspe/powerpcspe.c: Include rtx-vector-builder.h.
	(swap_const_vector_halves): Take an rtx pointer rather than rtx.
	Build a new vector rather than modifying a CONST_VECTOR in-place.
	(handle_special_swappables): Update call accordingly.
	* config/rs6000/rs6000-p8swap.c: Include rtx-vector-builder.h.
	(swap_const_vector_halves): Take an rtx pointer rather than rtx.
	Build a new vector rather than modifying a CONST_VECTOR in-place.
	(handle_special_swappables): Update call accordingly.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* simplify-rtx.c (simplify_const_binary_operation): Use
	CONST_VECTOR_ELT instead of XVECEXP.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* tree-cfg.c (verify_gimple_assign_ternary): Allow the size of
	the selector elements to be different from the data elements
	if the selector is a VECTOR_CST.
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Use a vector of
	ssizetype for the selector.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (shift_amt_for_vec_perm_mask): Try using series_p
	before testing each element individually.
	* tree-vect-generic.c (lower_vec_perm): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* selftest.h (selftest::vec_perm_indices_c_tests): Declare.
	* selftest-run-tests.c (selftest::run_tests): Call it.
	* vector-builder.h (vector_builder::operator ==): New function.
	(vector_builder::operator !=): Likewise.
	* vec-perm-indices.h (vec_perm_indices::series_p): Declare.
	(vec_perm_indices::all_from_input_p): New function.
	* vec-perm-indices.c (vec_perm_indices::series_p): Likewise.
	(test_vec_perm_12, selftest::vec_perm_indices_c_tests): Likewise.
	* fold-const.c (fold_ternary_loc): Use tree_to_vec_perm_builder
	instead of reading the VECTOR_CST directly.  Detect whether both
	vector inputs are the same before constructing the vec_perm_indices,
	and update the number of inputs argument accordingly.  Use the
	utility functions added above.  Only construct sel2 if we need to.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (expand_vec_perm_var): Use an explicit encoding for
	the broadcast of the low byte.
	(expand_mult_highpart): Use an explicit encoding for the permutes.
	* optabs-query.c (can_mult_highpart_p): Likewise.
	* tree-vect-loop.c (calc_vec_perm_mask_for_shift): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(vectorizable_bswap): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Use an
	explicit encoding for the power-of-2 permutes.
	(vect_permute_store_chain): Likewise.
	(vect_grouped_load_supported): Likewise.
	(vect_permute_load_chain): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* vec-perm-indices.h (vec_perm_indices_to_tree): Declare.
	* vec-perm-indices.c (vec_perm_indices_to_tree): New function.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Use it.
	* tree-vect-slp.c (vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (vectorizable_bswap): Likewise.
	(vect_gen_perm_mask_any): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* int-vector-builder.h: New file.
	* vec-perm-indices.h: Include int-vector-builder.h.
	(vec_perm_indices): Redefine as an int_vector_builder.
	(auto_vec_perm_indices): Delete.
	(vec_perm_builder): Redefine as a stand-alone class.
	(vec_perm_indices::vec_perm_indices): New function.
	(vec_perm_indices::clamp): Likewise.
	* vec-perm-indices.c: Include fold-const.h and tree-vector-builder.h.
	(vec_perm_indices::new_vector): New function.
	(vec_perm_indices::new_expanded_vector): Update for new
	vec_perm_indices class.
	(vec_perm_indices::rotate_inputs): New function.
	(vec_perm_indices::all_in_range_p): Operate directly on the
	encoded form, without computing elided elements.
	(tree_to_vec_perm_builder): Operate directly on the VECTOR_CST
	encoding.  Update for new vec_perm_indices class.
	* optabs.c (expand_vec_perm_const): Create a vec_perm_indices for
	the given vec_perm_builder.
	(expand_vec_perm_var): Update vec_perm_builder constructor.
	(expand_mult_highpart): Use vec_perm_builder instead of
	auto_vec_perm_indices.
	* optabs-query.c (can_mult_highpart_p): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.  Use a single
	or double series encoding as appropriate.
	* fold-const.c (fold_ternary_loc): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Likewise.
	(vect_permute_store_chain): Likewise.
	(vect_grouped_load_supported): Likewise.
	(vect_permute_load_chain): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	* tree-vect-slp.c (vect_build_slp_tree_1): Likewise.
	(vect_transform_slp_perm_load): Likewise.
	(vect_schedule_slp_instance): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(vectorizable_mask_load_store): Likewise.
	(vectorizable_bswap): Likewise.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	* tree-vect-generic.c (lower_vec_perm): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.  Use
	tree_to_vec_perm_builder to read the vector from a tree.
	* tree-vect-loop.c (calc_vec_perm_mask_for_shift): Take a
	vec_perm_builder instead of a vec_perm_indices.
	(have_whole_vector_shift): Use vec_perm_builder and
	vec_perm_indices instead of auto_vec_perm_indices.  Leave the
	truncation to calc_vec_perm_mask_for_shift.
	(vect_create_epilog_for_reduction): Likewise.
	* config/aarch64/aarch64.c (expand_vec_perm_d::perm): Change
	from auto_vec_perm_indices to vec_perm_indices.
	(aarch64_expand_vec_perm_const_1): Use rotate_inputs on d.perm
	instead of changing individual elements.
	(aarch64_vectorize_vec_perm_const): Use new_vector to install
	the vector in d.perm.
	* config/arm/arm.c (expand_vec_perm_d::perm): Change
	from auto_vec_perm_indices to vec_perm_indices.
	(arm_expand_vec_perm_const_1): Use rotate_inputs on d.perm
	instead of changing individual elements.
	(arm_vectorize_vec_perm_const): Use new_vector to install
	the vector in d.perm.
	* config/powerpcspe/powerpcspe.c (rs6000_expand_extract_even):
	Update vec_perm_builder constructor.
	(rs6000_expand_interleave): Likewise.
	* config/rs6000/rs6000.c (rs6000_expand_extract_even): Likewise.
	(rs6000_expand_interleave): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.c (can_vec_perm_var_p): Check whether lowering
	to qimode could truncate the indices.
	* optabs.c (expand_vec_perm_var): Likewise.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* Makefile.in (OBJS): Add vec-perm-indices.o.
	* vec-perm-indices.h: New file.
	* vec-perm-indices.c: Likewise.
	* target.h (vec_perm_indices): Replace with a forward class
	declaration.
	(auto_vec_perm_indices): Move to vec-perm-indices.h.
	* optabs.h: Include vec-perm-indices.h.
	(expand_vec_perm): Delete.
	(selector_fits_mode_p, expand_vec_perm_var): Declare.
	(expand_vec_perm_const): Declare.
	* target.def (vec_perm_const_ok): Replace with...
	(vec_perm_const): ...this new hook.
	* doc/tm.texi.in (TARGET_VECTORIZE_VEC_PERM_CONST_OK): Replace with...
	(TARGET_VECTORIZE_VEC_PERM_CONST): ...this new hook.
	* doc/tm.texi: Regenerate.
	* optabs.def (vec_perm_const): Delete.
	* doc/md.texi (vec_perm_const): Likewise.
	(vec_perm): Refer to TARGET_VECTORIZE_VEC_PERM_CONST.
	* expr.c (expand_expr_real_2): Use expand_vec_perm_const rather than
	expand_vec_perm for constant permutation vectors.  Assert that
	the mode of variable permutation vectors is the integer equivalent
	of the mode that is being permuted.
	* optabs-query.h (selector_fits_mode_p): Declare.
	* optabs-query.c: Include vec-perm-indices.h.
	(selector_fits_mode_p): New function.
	(can_vec_perm_const_p): Check whether targetm.vectorize.vec_perm_const
	is defined, instead of checking whether the vec_perm_const_optab
	exists.  Use targetm.vectorize.vec_perm_const instead of
	targetm.vectorize.vec_perm_const_ok.  Check whether the indices
	fit in the vector mode before using a variable permute.
	* optabs.c (shift_amt_for_vec_perm_mask): Take a mode and a
	vec_perm_indices instead of an rtx.
	(expand_vec_perm): Replace with...
	(expand_vec_perm_const): ...this new function.  Take the selector
	as a vec_perm_indices rather than an rtx.  Also take the mode of
	the selector.  Update call to shift_amt_for_vec_perm_mask.
	Use targetm.vectorize.vec_perm_const instead of vec_perm_const_optab.
	Use vec_perm_indices::new_expanded_vector to expand the original
	selector into bytes.  Check whether the indices fit in the vector
	mode before using a variable permute.
	(expand_vec_perm_var): Make global.
	(expand_mult_highpart): Use expand_vec_perm_const.
	* fold-const.c: Includes vec-perm-indices.h.
	* tree-ssa-forwprop.c: Likewise.
	* tree-vect-data-refs.c: Likewise.
	* tree-vect-generic.c: Likewise.
	* tree-vect-loop.c: Likewise.
	* tree-vect-slp.c: Likewise.
	* tree-vect-stmts.c: Likewise.
	* config/aarch64/aarch64-protos.h (aarch64_expand_vec_perm_const):
	Delete.
	* config/aarch64/aarch64-simd.md (vec_perm_const<mode>): Delete.
	* config/aarch64/aarch64.c (aarch64_expand_vec_perm_const)
	(aarch64_vectorize_vec_perm_const_ok): Fuse into...
	(aarch64_vectorize_vec_perm_const): ...this new function.
	(TARGET_VECTORIZE_VEC_PERM_CONST_OK): Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	* config/arm/arm-protos.h (arm_expand_vec_perm_const): Delete.
	* config/arm/vec-common.md (vec_perm_const<mode>): Delete.
	* config/arm/arm.c (TARGET_VECTORIZE_VEC_PERM_CONST_OK): Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	(arm_expand_vec_perm_const, arm_vectorize_vec_perm_const_ok): Merge
	into...
	(arm_vectorize_vec_perm_const): ...this new function.  Explicitly
	check for NEON modes.
	* config/i386/i386-protos.h (ix86_expand_vec_perm_const): Delete.
	* config/i386/sse.md (VEC_PERM_CONST, vec_perm_const<mode>): Delete.
	* config/i386/i386.c (ix86_expand_vec_perm_const_1): Update comment.
	(ix86_expand_vec_perm_const, ix86_vectorize_vec_perm_const_ok): Merge
	into...
	(ix86_vectorize_vec_perm_const): ...this new function.  Incorporate
	the old VEC_PERM_CONST conditions.
	* config/ia64/ia64-protos.h (ia64_expand_vec_perm_const): Delete.
	* config/ia64/vect.md (vec_perm_const<mode>): Delete.
	* config/ia64/ia64.c (ia64_expand_vec_perm_const)
	(ia64_vectorize_vec_perm_const_ok): Merge into...
	(ia64_vectorize_vec_perm_const): ...this new function.
	* config/mips/loongson.md (vec_perm_const<mode>): Delete.
	* config/mips/mips-msa.md (vec_perm_const<mode>): Delete.
	* config/mips/mips-ps-3d.md (vec_perm_constv2sf): Delete.
	* config/mips/mips-protos.h (mips_expand_vec_perm_const): Delete.
	* config/mips/mips.c (mips_expand_vec_perm_const)
	(mips_vectorize_vec_perm_const_ok): Merge into...
	(mips_vectorize_vec_perm_const): ...this new function.
	* config/powerpcspe/altivec.md (vec_perm_constv16qi): Delete.
	* config/powerpcspe/paired.md (vec_perm_constv2sf): Delete.
	* config/powerpcspe/spe.md (vec_perm_constv2si): Delete.
	* config/powerpcspe/vsx.md (vec_perm_const<mode>): Delete.
	* config/powerpcspe/powerpcspe-protos.h (altivec_expand_vec_perm_const)
	(rs6000_expand_vec_perm_const): Delete.
	* config/powerpcspe/powerpcspe.c (TARGET_VECTORIZE_VEC_PERM_CONST_OK):
	Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	(altivec_expand_vec_perm_const_le): Take each operand individually.
	Operate on constant selectors rather than rtxes.
	(altivec_expand_vec_perm_const): Likewise.  Update call to
	altivec_expand_vec_perm_const_le.
	(rs6000_expand_vec_perm_const): Delete.
	(rs6000_vectorize_vec_perm_const_ok): Delete.
	(rs6000_vectorize_vec_perm_const): New function.
	(rs6000_do_expand_vec_perm): Take a vec_perm_builder instead of
	an element count and rtx array.
	(rs6000_expand_extract_even): Update call accordingly.
	(rs6000_expand_interleave): Likewise.
	* config/rs6000/altivec.md (vec_perm_constv16qi): Delete.
	* config/rs6000/paired.md (vec_perm_constv2sf): Delete.
	* config/rs6000/vsx.md (vec_perm_const<mode>): Delete.
	* config/rs6000/rs6000-protos.h (altivec_expand_vec_perm_const)
	(rs6000_expand_vec_perm_const): Delete.
	* config/rs6000/rs6000.c (TARGET_VECTORIZE_VEC_PERM_CONST_OK): Delete.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.
	(altivec_expand_vec_perm_const_le): Take each operand individually.
	Operate on constant selectors rather than rtxes.
	(altivec_expand_vec_perm_const): Likewise.  Update call to
	altivec_expand_vec_perm_const_le.
	(rs6000_expand_vec_perm_const): Delete.
	(rs6000_vectorize_vec_perm_const_ok): Delete.
	(rs6000_vectorize_vec_perm_const): New function.  Remove stray
	reference to the SPE evmerge intructions.
	(rs6000_do_expand_vec_perm): Take a vec_perm_builder instead of
	an element count and rtx array.
	(rs6000_expand_extract_even): Update call accordingly.
	(rs6000_expand_interleave): Likewise.
	* config/sparc/sparc.md (vec_perm_constv8qi): Delete in favor of...
	* config/sparc/sparc.c (sparc_vectorize_vec_perm_const): ...this
	new function.
	(TARGET_VECTORIZE_VEC_PERM_CONST): Redefine.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs.c (expand_vec_perm_1): Assert that SEL has an integer
	vector mode and that that mode matches the mode of the data
	being permuted.
	(expand_vec_perm): Split handling of non-CONST_VECTOR selectors
	out into expand_vec_perm_var.  Do all CONST_VECTOR handling here,
	directly using expand_vec_perm_1 when forcing selectors into
	registers.
	(expand_vec_perm_var): New function, split out from expand_vec_perm.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.h (can_vec_perm_p): Delete.
	(can_vec_perm_var_p, can_vec_perm_const_p): Declare.
	* optabs-query.c (can_vec_perm_p): Split into...
	(can_vec_perm_var_p, can_vec_perm_const_p): ...these two functions.
	(can_mult_highpart_p): Use can_vec_perm_const_p to test whether a
	particular selector is valid.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
	* tree-vect-data-refs.c (vect_grouped_store_supported): Likewise.
	(vect_grouped_load_supported): Likewise.
	(vect_shift_permute_load_chain): Likewise.
	* tree-vect-slp.c (vect_build_slp_tree_1): Likewise.
	(vect_transform_slp_perm_load): Likewise.
	* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
	(vectorizable_bswap): Likewise.
	(vect_gen_perm_mask_checked): Likewise.
	* fold-const.c (fold_ternary_loc): Likewise.  Don't take
	implementations of variable permutation vectors into account
	when deciding which selector to use.
	* tree-vect-loop.c (have_whole_vector_shift): Don't check whether
	vec_perm_const_optab is supported; instead use can_vec_perm_const_p
	with a false third argument.
	* tree-vect-generic.c (lower_vec_perm): Use can_vec_perm_const_p
	to test whether the constant selector is valid and can_vec_perm_var_p
	to test whether a variable selector is valid.

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.h (can_vec_perm_p): Take a const vec_perm_indices *.
	* optabs-query.c (can_vec_perm_p): Likewise.
	* fold-const.c (fold_vec_perm): Take a const vec_perm_indices &
	instead of vec_perm_indices.
	* tree-vectorizer.h (vect_gen_perm_mask_any): Likewise,
	(vect_gen_perm_mask_checked): Likewise,
	* tree-vect-stmts.c (vect_gen_perm_mask_any): Likewise,
	(vect_gen_perm_mask_checked): Likewise,

2018-01-02  Richard Sandiford  <richard.sandiford@linaro.org>

	* optabs-query.h (qimode_for_vec_perm): Declare.
	* optabs-query.c (can_vec_perm_p): Split out qimode search to...
	(qimode_for_vec_perm): ...this new function.
	* optabs.c (expand_vec_perm): Use qimode_for_vec_perm.

2018-01-02  Aaron Sawdey  <acsawdey@linux.vnet.ibm.com>

	* rtlanal.c (canonicalize_condition): Return 0 if final rtx
	does not have a conditional at the top.

2018-01-02  Richard Biener  <rguenther@suse.de>

	* ipa-inline.c (big_speedup_p): Fix expression.

2018-01-02  Jan Hubicka  <hubicka@ucw.cz>

	PR target/81616
	* config/i386/x86-tune-costs.h: Increase cost of integer load costs
	for generic 4->6.

2018-01-02  Jan Hubicka  <hubicka@ucw.cz>

	PR target/81616
	Generic tuning.
	* x86-tune-costs.h (generic_cost): Reduce cost of FDIV 20->17,
	cost of sqrt 20->14, DIVSS 18->13, DIVSD 32->17, SQRtSS 30->14
	and SQRTsD 58->18, cond_not_taken_branch_cost. 2->1. Increase
	cond_taken_branch_cost 3->4.

2018-01-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/83581
	* tree-loop-distribution.c (pass_loop_distribution::execute): Return
	TODO_cleanup_cfg if any changes have been made.

	PR middle-end/83608
	* expr.c (store_expr_with_bounds): Use simplify_gen_subreg instead of
	convert_modes if target mode has the right side, but different mode
	class.

	PR middle-end/83609
	* expr.c (expand_assignment): Fix up a typo in simplify_gen_subreg
	last argument when extracting from CONCAT.  If either from_real or
	from_imag is NULL, use expansion through memory.  If result is not
	a CONCAT and simplify_gen_subreg fails, try to simplify_gen_subreg
	the parts directly to inner mode, if even that fails, use expansion
	through memory.

	PR middle-end/83623
	* expmed.c (expand_shift_1): For 2-byte rotates by BITS_PER_UNIT,
	check for bswap in mode rather than HImode and use that in expand_unop
	too.

Copyright (C) 2018 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.