| # GCC target-specific configuration file. |
| # Copyright (C) 1997-2019 Free Software Foundation, Inc. |
| |
| #This file is part of GCC. |
| |
| #GCC is free software; you can redistribute it and/or modify it under |
| #the terms of the GNU General Public License as published by the Free |
| #Software Foundation; either version 3, or (at your option) any later |
| #version. |
| |
| #GCC is distributed in the hope that it will be useful, but WITHOUT |
| #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| #for more details. |
| |
| #You should have received a copy of the GNU General Public License |
| #along with GCC; see the file COPYING3. If not see |
| #<http://www.gnu.org/licenses/>. |
| |
| # This is the GCC target-specific configuration file |
| # where a configuration type is mapped to different system-specific |
| # definitions and files. This is invoked by the autoconf-generated |
| # configure script. Putting it in a separate shell file lets us skip |
| # running autoconf when modifying target-specific information. |
| |
| # When you change the cases in the OS or target switches, consider |
| # updating ../libgcc/config.host also. |
| |
| # This file switches on the shell variable ${target}, and also uses the |
| # following shell variables: |
| # |
| # with_* Various variables as set by configure. |
| # |
| # enable_threads Either the name, yes or no depending on whether |
| # threads support was requested. |
| # |
| # default_use_cxa_atexit |
| # The default value for the $enable___cxa_atexit |
| # variable. enable___cxa_atexit needs to be set to |
| # "yes" for the correct operation of C++ destructors |
| # but it relies upon the presence of a non-standard C |
| # library function called __cxa_atexit. |
| # Since not all C libraries provide __cxa_atexit the |
| # default value of $default_use_cxa_atexit is set to |
| # "no" except for targets which are known to be OK. |
| # |
| # default_gnu_indirect_function |
| # The default value for the $enable_gnu_indirect_function |
| # variable. enable_gnu_indirect_function relies |
| # upon the presence of a non-standard gnu ifunc support |
| # in the assembler, linker and dynamic linker. |
| # Since not all libraries provide the dynamic linking |
| # support, the default value of |
| # $default_gnu_indirect_function is set to |
| # "no" except for targets which are known to be OK. |
| # |
| # gas_flag Either yes or no depending on whether GNU as was |
| # requested. |
| # |
| # gnu_ld_flag Either yes or no depending on whether GNU ld was |
| # requested. |
| |
| # This file sets the following shell variables for use by the |
| # autoconf-generated configure script: |
| # |
| # cpu_type The name of the cpu, if different from the first |
| # chunk of the canonical target name. |
| # |
| # tm_defines List of target macros to define for all compilations. |
| # |
| # tm_file A list of target macro files, if different from |
| # "$cpu_type/$cpu_type.h". Usually it's constructed |
| # per target in a way like this: |
| # tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h" |
| # Note that the preferred order is: |
| # - specific target header "${cpu_type}/${cpu_type.h}" |
| # - generic headers like dbxelf.h elfos.h, etc. |
| # - specializing target headers like ${cpu_type.h}/elf.h |
| # This helps to keep OS specific stuff out of the CPU |
| # defining header ${cpu_type}/${cpu_type.h}. |
| # |
| # It is possible to include automatically-generated |
| # build-directory files by prefixing them with "./". |
| # All other files should relative to $srcdir/config. |
| # |
| # tm_p_file Location of file with declarations for functions |
| # in $out_file. |
| # |
| # tm_d_file A list of headers with definitions of target hook |
| # macros for the D compiler. |
| # |
| # out_file The name of the machine description C support |
| # file, if different from "$cpu_type/$cpu_type.c". |
| # |
| # common_out_file The name of the source file for code shared between |
| # the compiler proper and the driver. |
| # |
| # md_file The name of the machine-description file, if |
| # different from "$cpu_type/$cpu_type.md". |
| # |
| # tmake_file A list of machine-description-specific |
| # makefile-fragments, if different from |
| # "$cpu_type/t-$cpu_type". |
| # |
| # extra_modes The name of the file containing a list of extra |
| # machine modes, if necessary and different from |
| # "$cpu_type/$cpu_type-modes.def". |
| # |
| # extra_objs List of extra objects that should be linked into |
| # the compiler proper (cc1, cc1obj, cc1plus) |
| # depending on target. |
| # |
| # extra_gcc_objs List of extra objects that should be linked into |
| # the compiler driver (gcc) depending on target. |
| # |
| # extra_headers List of used header files from the directory |
| # config/${cpu_type}. |
| # |
| # user_headers_inc_next_pre |
| # List of header file names of internal gcc header |
| # files, which should be prefixed by an include_next. |
| # user_headers_inc_next_post |
| # List of header file names of internal gcc header |
| # files, which should be postfixed by an include_next. |
| # use_gcc_tgmath If set, add tgmath.h to the list of used header |
| # files. |
| # |
| # use_gcc_stdint If "wrap", install a version of stdint.h that |
| # wraps the system's copy for hosted compilations; |
| # if "provide", provide a version of systems without |
| # such a system header; otherwise "none", do not |
| # provide such a header at all. |
| # |
| # extra_programs List of extra executables compiled for this target |
| # machine, used when linking. |
| # |
| # extra_options List of target-dependent .opt files. |
| # |
| # c_target_objs List of extra target-dependent objects that be |
| # linked into the C compiler only. |
| # |
| # cxx_target_objs List of extra target-dependent objects that be |
| # linked into the C++ compiler only. |
| # |
| # d_target_objs List of extra target-dependent objects that be |
| # linked into the D compiler only. |
| # |
| # fortran_target_objs List of extra target-dependent objects that be |
| # linked into the fortran compiler only. |
| # |
| # target_gtfiles List of extra source files with type information. |
| # |
| # xm_defines List of macros to define when compiling for the |
| # target machine. |
| # |
| # xm_file List of files to include when compiling for the |
| # target machine. |
| # |
| # use_collect2 Set to yes or no, depending on whether collect2 |
| # will be used. |
| # |
| # target_cpu_default Set to override the default target model. |
| # |
| # gdb_needs_out_file_path |
| # Set to yes if gdb needs a dir command with |
| # `dirname $out_file`. |
| # |
| # thread_file Set to control which thread package to use. |
| # |
| # gas Set to yes or no depending on whether the target |
| # system normally uses GNU as. |
| # |
| # configure_default_options |
| # Set to an initializer for configure_default_options |
| # in configargs.h, based on --with-cpu et cetera. |
| # |
| # native_system_header_dir |
| # Where system header files are found for this |
| # target. This defaults to /usr/include. If |
| # the --with-sysroot configure option or the |
| # --sysroot command line option is used this |
| # will be relative to the sysroot. |
| # target_type_format_char |
| # The default character to be used for formatting |
| # the attribute in a |
| # .type symbol_name, ${t_t_f_c}<property> |
| # directive. |
| |
| # The following variables are used in each case-construct to build up the |
| # outgoing variables: |
| # |
| # gnu_ld Set to yes or no depending on whether the target |
| # system normally uses GNU ld. |
| # |
| # target_has_targetcm Set to yes or no depending on whether the target |
| # has its own definition of targetcm. |
| # |
| # target_has_targetm_common Set to yes or no depending on whether the |
| # target has its own definition of targetm_common. |
| # |
| # target_has_targetdm Set to yes or no depending on whether the target |
| # has its own definition of targetdm. |
| |
| out_file= |
| common_out_file= |
| tmake_file= |
| extra_headers= |
| user_headers_inc_next_pre= |
| user_headers_inc_next_post= |
| use_gcc_tgmath=yes |
| use_gcc_stdint=none |
| extra_programs= |
| extra_objs= |
| extra_gcc_objs= |
| extra_options= |
| c_target_objs= |
| cxx_target_objs= |
| d_target_objs= |
| fortran_target_objs= |
| target_has_targetcm=no |
| target_has_targetm_common=yes |
| target_has_targetdm=no |
| tm_defines= |
| xm_defines= |
| # Set this to force installation and use of collect2. |
| use_collect2= |
| # Set this to override the default target model. |
| target_cpu_default= |
| # Set this if gdb needs a dir command with `dirname $out_file` |
| gdb_needs_out_file_path= |
| # Set this to control which thread package will be used. |
| thread_file= |
| # Reinitialize these from the flag values every loop pass, since some |
| # configure entries modify them. |
| gas="$gas_flag" |
| gnu_ld="$gnu_ld_flag" |
| default_use_cxa_atexit=no |
| default_gnu_indirect_function=no |
| target_gtfiles= |
| need_64bit_isa= |
| native_system_header_dir=/usr/include |
| target_type_format_char='@' |
| |
| # Don't carry these over build->host->target. Please. |
| xm_file= |
| md_file= |
| |
| # Obsolete configurations. |
| case ${target} in |
| *-*-solaris2.10* \ |
| | spu*-*-* \ |
| | tile*-*-* \ |
| ) |
| if test "x$enable_obsolete" != xyes; then |
| echo "*** Configuration ${target} is obsolete." >&2 |
| echo "*** Specify --enable-obsolete to build it anyway." >&2 |
| echo "*** Support will be REMOVED in the next major release of GCC," >&2 |
| echo "*** unless a maintainer comes forward." >&2 |
| exit 1 |
| fi;; |
| esac |
| |
| # Unsupported targets list. Do not put an entry in this list unless |
| # it would otherwise be caught by a more permissive pattern. The list |
| # should be in alphabetical order. |
| case ${target} in |
| # Avoid special cases that are not obsolete |
| arm*-*-*eabi* \ |
| ) |
| ;; |
| arm*-wince-pe* \ |
| | arm*-*-ecos-elf \ |
| | arm*-*-elf \ |
| | arm*-*-linux* \ |
| | arm*-*-uclinux* \ |
| | i[34567]86-go32-* \ |
| | i[34567]86-*-go32* \ |
| | m68k-*-uclinuxoldabi* \ |
| | mips64orion*-*-rtems* \ |
| | pdp11-*-bsd \ |
| | powerpc*-*-linux*paired* \ |
| | powerpc*-*-*spe* \ |
| | sparc-hal-solaris2* \ |
| | thumb-*-* \ |
| | *-*-freebsd[12] | *-*-freebsd[1234].* \ |
| | *-*-freebsd*aout* \ |
| | *-*-linux*aout* \ |
| | *-*-linux*coff* \ |
| | *-*-linux*libc1* \ |
| | *-*-linux*oldld* \ |
| | *-*-rtemsaout* \ |
| | *-*-rtemscoff* \ |
| | *-*-solaris2 \ |
| | *-*-solaris2.[0-9] \ |
| | *-*-solaris2.[0-9].* \ |
| | *-*-sysv* \ |
| | vax-*-vms* \ |
| ) |
| echo "*** Configuration ${target} not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be |
| # updated in each machine entry. Also set default extra_headers for some |
| # machines. |
| tm_p_file= |
| cpu_type=`echo ${target} | sed 's/-.*$//'` |
| cpu_is_64bit= |
| case ${target} in |
| m32c*-*-*) |
| cpu_type=m32c |
| tmake_file=m32c/t-m32c |
| target_has_targetm_common=no |
| ;; |
| aarch64*-*-*) |
| cpu_type=aarch64 |
| extra_headers="arm_fp16.h arm_neon.h arm_acle.h" |
| c_target_objs="aarch64-c.o" |
| cxx_target_objs="aarch64-c.o" |
| d_target_objs="aarch64-d.o" |
| extra_objs="aarch64-builtins.o aarch-common.o cortex-a57-fma-steering.o aarch64-speculation.o falkor-tag-collision-avoidance.o aarch64-bti-insert.o" |
| target_gtfiles="\$(srcdir)/config/aarch64/aarch64-builtins.c" |
| target_has_targetm_common=yes |
| ;; |
| alpha*-*-*) |
| cpu_type=alpha |
| extra_options="${extra_options} g.opt" |
| ;; |
| amdgcn*) |
| cpu_type=gcn |
| use_gcc_stdint=wrap |
| ;; |
| am33_2.0-*-linux*) |
| cpu_type=mn10300 |
| ;; |
| arc*-*-*) |
| cpu_type=arc |
| c_target_objs="arc-c.o" |
| cxx_target_objs="arc-c.o" |
| extra_options="${extra_options} arc/arc-tables.opt g.opt" |
| extra_headers="arc-simd.h" |
| ;; |
| arm*-*-*) |
| cpu_type=arm |
| extra_objs="arm-builtins.o aarch-common.o" |
| extra_headers="mmintrin.h arm_neon.h arm_acle.h arm_fp16.h arm_cmse.h" |
| target_type_format_char='%' |
| c_target_objs="arm-c.o" |
| cxx_target_objs="arm-c.o" |
| d_target_objs="arm-d.o" |
| extra_options="${extra_options} arm/arm-tables.opt" |
| target_gtfiles="\$(srcdir)/config/arm/arm-builtins.c" |
| ;; |
| avr-*-*) |
| cpu_type=avr |
| c_target_objs="avr-c.o" |
| cxx_target_objs="avr-c.o" |
| ;; |
| bfin*-*) |
| cpu_type=bfin |
| ;; |
| crisv32-*) |
| cpu_type=cris |
| ;; |
| frv*) cpu_type=frv |
| extra_options="${extra_options} g.opt" |
| ;; |
| ft32*) cpu_type=ft32 |
| target_has_targetm_common=no |
| ;; |
| moxie*) cpu_type=moxie |
| target_has_targetm_common=no |
| ;; |
| fido-*-*) |
| cpu_type=m68k |
| extra_headers=math-68881.h |
| extra_options="${extra_options} m68k/m68k-tables.opt" |
| ;; |
| i[34567]86-*-*) |
| cpu_type=i386 |
| c_target_objs="i386-c.o" |
| cxx_target_objs="i386-c.o" |
| d_target_objs="i386-d.o" |
| extra_objs="x86-tune-sched.o x86-tune-sched-bd.o x86-tune-sched-atom.o x86-tune-sched-core.o" |
| extra_options="${extra_options} fused-madd.opt" |
| extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h |
| pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h |
| nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h |
| immintrin.h x86intrin.h avxintrin.h xopintrin.h |
| ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h |
| lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h |
| avx2intrin.h avx512fintrin.h fmaintrin.h f16cintrin.h |
| rtmintrin.h xtestintrin.h rdseedintrin.h prfchwintrin.h |
| adxintrin.h fxsrintrin.h xsaveintrin.h xsaveoptintrin.h |
| avx512cdintrin.h avx512erintrin.h avx512pfintrin.h |
| shaintrin.h clflushoptintrin.h xsavecintrin.h |
| xsavesintrin.h avx512dqintrin.h avx512bwintrin.h |
| avx512vlintrin.h avx512vlbwintrin.h avx512vldqintrin.h |
| avx512ifmaintrin.h avx512ifmavlintrin.h avx512vbmiintrin.h |
| avx512vbmivlintrin.h avx5124fmapsintrin.h avx5124vnniwintrin.h |
| avx512vpopcntdqintrin.h clwbintrin.h mwaitxintrin.h |
| clzerointrin.h pkuintrin.h sgxintrin.h cetintrin.h |
| gfniintrin.h cet.h avx512vbmi2intrin.h |
| avx512vbmi2vlintrin.h avx512vnniintrin.h |
| avx512vnnivlintrin.h vaesintrin.h vpclmulqdqintrin.h |
| avx512vpopcntdqvlintrin.h avx512bitalgintrin.h |
| pconfigintrin.h wbnoinvdintrin.h movdirintrin.h |
| waitpkgintrin.h cldemoteintrin.h" |
| ;; |
| x86_64-*-*) |
| cpu_type=i386 |
| c_target_objs="i386-c.o" |
| cxx_target_objs="i386-c.o" |
| d_target_objs="i386-d.o" |
| extra_options="${extra_options} fused-madd.opt" |
| extra_objs="x86-tune-sched.o x86-tune-sched-bd.o x86-tune-sched-atom.o x86-tune-sched-core.o" |
| extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h |
| pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h |
| nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h |
| immintrin.h x86intrin.h avxintrin.h xopintrin.h |
| ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h |
| lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h |
| avx2intrin.h avx512fintrin.h fmaintrin.h f16cintrin.h |
| rtmintrin.h xtestintrin.h rdseedintrin.h prfchwintrin.h |
| adxintrin.h fxsrintrin.h xsaveintrin.h xsaveoptintrin.h |
| avx512cdintrin.h avx512erintrin.h avx512pfintrin.h |
| shaintrin.h clflushoptintrin.h xsavecintrin.h |
| xsavesintrin.h avx512dqintrin.h avx512bwintrin.h |
| avx512vlintrin.h avx512vlbwintrin.h avx512vldqintrin.h |
| avx512ifmaintrin.h avx512ifmavlintrin.h avx512vbmiintrin.h |
| avx512vbmivlintrin.h avx5124fmapsintrin.h avx5124vnniwintrin.h |
| avx512vpopcntdqintrin.h clwbintrin.h mwaitxintrin.h |
| clzerointrin.h pkuintrin.h sgxintrin.h cetintrin.h |
| gfniintrin.h cet.h avx512vbmi2intrin.h |
| avx512vbmi2vlintrin.h avx512vnniintrin.h |
| avx512vnnivlintrin.h vaesintrin.h vpclmulqdqintrin.h |
| avx512vpopcntdqvlintrin.h avx512bitalgintrin.h |
| pconfigintrin.h wbnoinvdintrin.h movdirintrin.h |
| waitpkgintrin.h cldemoteintrin.h" |
| ;; |
| ia64-*-*) |
| extra_headers=ia64intrin.h |
| extra_options="${extra_options} g.opt fused-madd.opt" |
| ;; |
| hppa*-*-*) |
| cpu_type=pa |
| ;; |
| lm32*) |
| extra_options="${extra_options} g.opt" |
| ;; |
| m32r*-*-*) |
| cpu_type=m32r |
| extra_options="${extra_options} g.opt" |
| ;; |
| m68k-*-*) |
| extra_headers=math-68881.h |
| extra_options="${extra_options} m68k/m68k-tables.opt" |
| ;; |
| microblaze*-*-*) |
| cpu_type=microblaze |
| extra_options="${extra_options} g.opt" |
| ;; |
| mips*-*-*) |
| cpu_type=mips |
| d_target_objs="mips-d.o" |
| extra_headers="loongson.h loongson-mmiintrin.h msa.h" |
| extra_objs="frame-header-opt.o" |
| extra_options="${extra_options} g.opt fused-madd.opt mips/mips-tables.opt" |
| ;; |
| nds32*) |
| cpu_type=nds32 |
| extra_headers="nds32_intrinsic.h nds32_isr.h nds32_init.inc" |
| case ${target} in |
| nds32*-*-linux*) |
| extra_options="${extra_options} nds32/nds32-linux.opt" |
| ;; |
| nds32*-*-elf*) |
| extra_options="${extra_options} nds32/nds32-elf.opt" |
| ;; |
| *) |
| ;; |
| esac |
| extra_objs="nds32-cost.o nds32-intrinsic.o nds32-isr.o nds32-md-auxiliary.o nds32-pipelines-auxiliary.o nds32-predicates.o nds32-memory-manipulation.o nds32-fp-as-gp.o nds32-relax-opt.o nds32-utils.o" |
| ;; |
| nios2-*-*) |
| cpu_type=nios2 |
| extra_options="${extra_options} g.opt" |
| ;; |
| nvptx-*-*) |
| cpu_type=nvptx |
| ;; |
| or1k*-*-*) |
| cpu_type=or1k |
| ;; |
| powerpc*-*-*) |
| cpu_type=rs6000 |
| extra_objs="rs6000-string.o rs6000-p8swap.o" |
| extra_headers="ppc-asm.h altivec.h htmintrin.h htmxlintrin.h" |
| extra_headers="${extra_headers} bmi2intrin.h bmiintrin.h" |
| extra_headers="${extra_headers} xmmintrin.h mm_malloc.h emmintrin.h" |
| extra_headers="${extra_headers} mmintrin.h x86intrin.h" |
| extra_headers="${extra_headers} pmmintrin.h tmmintrin.h smmintrin.h" |
| extra_headers="${extra_headers} ppu_intrinsics.h spu2vmx.h vec_types.h si2vmx.h" |
| extra_headers="${extra_headers} amo.h" |
| case x$with_cpu in |
| xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456789]|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|xe6500) |
| cpu_is_64bit=yes |
| ;; |
| esac |
| extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt" |
| ;; |
| riscv*) |
| cpu_type=riscv |
| extra_objs="riscv-builtins.o riscv-c.o" |
| d_target_objs="riscv-d.o" |
| ;; |
| rs6000*-*-*) |
| extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt" |
| extra_objs="rs6000-string.o rs6000-p8swap.o" |
| ;; |
| sparc*-*-*) |
| cpu_type=sparc |
| c_target_objs="sparc-c.o" |
| cxx_target_objs="sparc-c.o" |
| d_target_objs="sparc-d.o" |
| extra_headers="visintrin.h" |
| ;; |
| spu*-*-*) |
| cpu_type=spu |
| ;; |
| s390*-*-*) |
| cpu_type=s390 |
| d_target_objs="s390-d.o" |
| extra_options="${extra_options} fused-madd.opt" |
| extra_headers="s390intrin.h htmintrin.h htmxlintrin.h vecintrin.h" |
| ;; |
| # Note the 'l'; we need to be able to match e.g. "shle" or "shl". |
| sh[123456789lbe]*-*-* | sh-*-*) |
| cpu_type=sh |
| extra_options="${extra_options} fused-madd.opt" |
| extra_objs="${extra_objs} sh_treg_combine.o sh-mem.o sh_optimize_sett_clrt.o" |
| ;; |
| v850*-*-*) |
| cpu_type=v850 |
| ;; |
| tic6x-*-*) |
| cpu_type=c6x |
| extra_headers="c6x_intrinsics.h" |
| extra_options="${extra_options} c6x/c6x-tables.opt" |
| ;; |
| xtensa*-*-*) |
| extra_options="${extra_options} fused-madd.opt" |
| ;; |
| tilegx*-*-*) |
| cpu_type=tilegx |
| ;; |
| tilepro*-*-*) |
| cpu_type=tilepro |
| ;; |
| esac |
| |
| tm_file=${cpu_type}/${cpu_type}.h |
| tm_d_file=${cpu_type}/${cpu_type}.h |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h |
| then |
| tm_p_file=${cpu_type}/${cpu_type}-protos.h |
| tm_d_file="${tm_d_file} ${cpu_type}/${cpu_type}-protos.h" |
| fi |
| |
| extra_modes= |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def |
| then |
| extra_modes=${cpu_type}/${cpu_type}-modes.def |
| fi |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt |
| then |
| extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt" |
| fi |
| |
| case ${target} in |
| aarch64*-*-*) |
| tm_p_file="${tm_p_file} arm/aarch-common-protos.h" |
| case ${with_abi} in |
| "") |
| if test "x$with_multilib_list" = xilp32; then |
| tm_file="aarch64/biarchilp32.h ${tm_file}" |
| else |
| tm_file="aarch64/biarchlp64.h ${tm_file}" |
| fi |
| ;; |
| ilp32) |
| tm_file="aarch64/biarchilp32.h ${tm_file}" |
| ;; |
| lp64) |
| tm_file="aarch64/biarchlp64.h ${tm_file}" |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" |
| exit 1 |
| esac |
| ;; |
| i[34567]86-*-*) |
| if test "x$with_abi" != x; then |
| echo "This target does not support --with-abi." |
| exit 1 |
| fi |
| if test "x$enable_cld" = xyes; then |
| tm_defines="${tm_defines} USE_IX86_CLD=1" |
| fi |
| if test "x$enable_frame_pointer" = xyes; then |
| tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1" |
| fi |
| ;; |
| x86_64-*-*) |
| case ${with_abi} in |
| "") |
| if test "x$with_multilib_list" = xmx32; then |
| tm_file="i386/biarchx32.h ${tm_file}" |
| else |
| tm_file="i386/biarch64.h ${tm_file}" |
| fi |
| ;; |
| 64 | m64) |
| tm_file="i386/biarch64.h ${tm_file}" |
| ;; |
| x32 | mx32) |
| tm_file="i386/biarchx32.h ${tm_file}" |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" |
| exit 1 |
| esac |
| if test "x$enable_cld" = xyes; then |
| tm_defines="${tm_defines} USE_IX86_CLD=1" |
| fi |
| if test "x$enable_frame_pointer" = xyes; then |
| tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1" |
| fi |
| ;; |
| arm*-*-*) |
| tm_p_file="arm/arm-flags.h ${tm_p_file} arm/aarch-common-protos.h" |
| ;; |
| esac |
| |
| # On a.out targets, we need to use collect2. |
| case ${target} in |
| *-*-*aout*) |
| use_collect2=yes |
| ;; |
| esac |
| |
| # Common C libraries. |
| tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4" |
| |
| # 32-bit x86 processors supported by --with-arch=. Each processor |
| # MUST be separated by exactly one space. |
| x86_archs="athlon athlon-4 athlon-fx athlon-mp athlon-tbird \ |
| athlon-xp k6 k6-2 k6-3 geode c3 c3-2 winchip-c6 winchip2 i386 i486 \ |
| i586 i686 pentium pentium-m pentium-mmx pentium2 pentium3 pentium3m \ |
| pentium4 pentium4m pentiumpro prescott lakemont" |
| |
| # 64-bit x86 processors supported by --with-arch=. Each processor |
| # MUST be separated by exactly one space. |
| x86_64_archs="amdfam10 athlon64 athlon64-sse3 barcelona bdver1 bdver2 \ |
| bdver3 bdver4 znver1 znver2 btver1 btver2 k8 k8-sse3 opteron \ |
| opteron-sse3 nocona core2 corei7 corei7-avx core-avx-i core-avx2 atom \ |
| slm nehalem westmere sandybridge ivybridge haswell broadwell bonnell \ |
| silvermont knl knm skylake-avx512 cannonlake icelake-client icelake-server \ |
| skylake goldmont goldmont-plus tremont cascadelake tigerlake x86-64 \ |
| native" |
| |
| # Additional x86 processors supported by --with-cpu=. Each processor |
| # MUST be separated by exactly one space. |
| x86_cpus="generic intel" |
| |
| # Common parts for widely ported systems. |
| case ${target} in |
| *-*-darwin*) |
| tmake_file="t-darwin " |
| tm_file="${tm_file} darwin.h" |
| case ${target} in |
| *-*-darwin9*) |
| tm_file="${tm_file} darwin9.h" |
| ;; |
| *-*-darwin[1][01]*) |
| tm_file="${tm_file} darwin9.h darwin10.h" |
| ;; |
| *-*-darwin[1][2-9]* | *-*-darwin[2][0-9]*) |
| tm_file="${tm_file} darwin9.h darwin10.h darwin12.h" |
| ;; |
| esac |
| tm_file="${tm_file} ${cpu_type}/darwin.h" |
| tm_p_file="${tm_p_file} darwin-protos.h" |
| target_gtfiles="\$(srcdir)/config/darwin.c" |
| extra_options="${extra_options} darwin.opt" |
| c_target_objs="${c_target_objs} darwin-c.o" |
| cxx_target_objs="${cxx_target_objs} darwin-c.o" |
| fortran_target_objs="darwin-f.o" |
| target_has_targetcm=yes |
| extra_objs="${extra_objs} darwin.o" |
| extra_gcc_objs="darwin-driver.o" |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| ;; |
| *-*-dragonfly*) |
| gas=yes |
| gnu_ld=yes |
| tmake_file="t-slibgcc" |
| case ${enable_threads} in |
| "" | yes | posix) |
| thread_file='posix' |
| ;; |
| no | single) |
| # Let these non-posix thread selections fall through if requested |
| ;; |
| *) |
| echo 'Unknown thread configuration for DragonFly BSD' |
| exit 1 |
| ;; |
| esac |
| extra_options="$extra_options rpath.opt dragonfly.opt" |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| ;; |
| *-*-freebsd*) |
| # This is the generic ELF configuration of FreeBSD. Later |
| # machine-specific sections may refine and add to this |
| # configuration. |
| # |
| # Due to tm_file entry ordering issues that vary between cpu |
| # architectures, we only define fbsd_tm_file to allow the |
| # machine-specific section to dictate the final order of all |
| # entries of tm_file with the minor exception that components |
| # of the tm_file set here will always be of the form: |
| # |
| # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h |
| # |
| # The machine-specific section should not tamper with this |
| # ordering but may order all other entries of tm_file as it |
| # pleases around the provided core setting. |
| gas=yes |
| gnu_ld=yes |
| fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'` |
| if test "$fbsd_major" = ""; then |
| echo "Specify the major version number of the targeted FreeBSD release" |
| echo "like this: --target=amd64-unknown-freebsd10.1" |
| exit 1 |
| fi |
| tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}" |
| tmake_file="t-slibgcc" |
| case ${enable_threads} in |
| no) |
| fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h" |
| ;; |
| "" | yes | posix) |
| thread_file='posix' |
| ;; |
| *) |
| echo 'Unknown thread configuration for FreeBSD' |
| exit 1 |
| ;; |
| esac |
| fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h" |
| extra_options="$extra_options rpath.opt freebsd.opt" |
| case ${target} in |
| *-*-freebsd[345].*) |
| :;; |
| *) |
| default_use_cxa_atexit=yes;; |
| esac |
| use_gcc_stdint=wrap |
| ;; |
| *-*-fuchsia*) |
| native_system_header_dir=/include |
| ;; |
| *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu) |
| extra_options="$extra_options gnu-user.opt" |
| gas=yes |
| gnu_ld=yes |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| tmake_file="t-slibgcc" |
| case $target in |
| *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu) |
| :;; |
| *-*-gnu*) |
| native_system_header_dir=/include |
| ;; |
| esac |
| # Linux C libraries selection switch: glibc / uclibc / bionic. |
| # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD. |
| case $target in |
| *linux*) |
| tm_p_file="${tm_p_file} linux-protos.h" |
| tmake_file="${tmake_file} t-linux" |
| extra_objs="${extra_objs} linux.o" |
| extra_options="${extra_options} linux.opt" |
| ;; |
| esac |
| case $target in |
| *-*-*android*) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC" |
| ;; |
| *-*-*uclibc*) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC" |
| ;; |
| *-*-*musl*) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL" |
| ;; |
| *) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC" |
| ;; |
| esac |
| # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit |
| # is provided. |
| default_use_cxa_atexit=yes |
| use_gcc_tgmath=no |
| use_gcc_stdint=wrap |
| # Enable compilation for Android by default for *android* targets. |
| case $target in |
| *-*-*android*) |
| tm_defines="$tm_defines ANDROID_DEFAULT=1" |
| ;; |
| *) |
| tm_defines="$tm_defines ANDROID_DEFAULT=0" |
| ;; |
| esac |
| c_target_objs="${c_target_objs} glibc-c.o" |
| cxx_target_objs="${cxx_target_objs} glibc-c.o" |
| d_target_objs="${d_target_objs} glibc-d.o" |
| tmake_file="${tmake_file} t-glibc" |
| target_has_targetcm=yes |
| target_has_targetdm=yes |
| ;; |
| *-*-netbsd*) |
| tm_p_file="${tm_p_file} netbsd-protos.h" |
| tmake_file="t-netbsd t-slibgcc" |
| extra_objs="${extra_objs} netbsd.o" |
| d_target_objs="${d_target_objs} netbsd-d.o" |
| gas=yes |
| gnu_ld=yes |
| use_gcc_stdint=wrap |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| nbsd_tm_file="netbsd.h netbsd-stdint.h netbsd-elf.h" |
| default_use_cxa_atexit=yes |
| target_has_targetdm=yes |
| ;; |
| *-*-openbsd*) |
| tmake_file="t-openbsd" |
| case ${enable_threads} in |
| yes) |
| thread_file='posix' |
| ;; |
| esac |
| case ${target} in |
| *-*-openbsd4.[3-9]|*-*-openbsd[5-9]*) |
| default_use_cxa_atexit=yes |
| ;; |
| esac |
| ;; |
| *-*-phoenix*) |
| gas=yes |
| gnu_ld=yes |
| default_use_cxa_atexit=yes |
| ;; |
| *-*-rtems*) |
| case ${enable_threads} in |
| "" | yes | rtems) thread_file='rtems' ;; |
| posix) thread_file='posix' ;; |
| no) ;; |
| *) |
| echo 'Unknown thread configuration for RTEMS' |
| exit 1 |
| ;; |
| esac |
| tmake_file="${tmake_file} t-rtems" |
| extra_options="${extra_options} rtems.opt" |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| ;; |
| *-*-uclinux*) |
| extra_options="$extra_options gnu-user.opt" |
| use_gcc_stdint=wrap |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC" |
| ;; |
| *-*-rdos*) |
| use_gcc_stdint=wrap |
| ;; |
| *-*-solaris2*) |
| # i?86-*-solaris2* needs to insert headers between cpu default and |
| # Solaris 2 specific ones. |
| sol2_tm_file_head="dbxelf.h elfos.h ${cpu_type}/sysv4.h" |
| sol2_tm_file_tail="${cpu_type}/sol2.h sol2.h" |
| sol2_tm_file="${sol2_tm_file_head} ${sol2_tm_file_tail}" |
| case ${target} in |
| *-*-solaris2.1[1-9]*) |
| # __cxa_atexit was introduced in Solaris 11.4. |
| default_use_cxa_atexit=yes |
| ;; |
| esac |
| use_gcc_stdint=wrap |
| if test x$gnu_ld = xyes; then |
| tm_file="usegld.h ${tm_file}" |
| fi |
| if test x$gas = xyes; then |
| tm_file="usegas.h ${tm_file}" |
| fi |
| tm_p_file="${tm_p_file} sol2-protos.h" |
| tmake_file="${tmake_file} t-sol2 t-slibgcc" |
| c_target_objs="${c_target_objs} sol2-c.o" |
| cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o" |
| d_target_objs="${d_target_objs} sol2-d.o" |
| extra_objs="${extra_objs} sol2.o sol2-stubs.o" |
| extra_options="${extra_options} sol2.opt" |
| case ${enable_threads}:${have_pthread_h}:${have_thread_h} in |
| "":yes:* | yes:yes:* ) |
| thread_file=posix |
| ;; |
| esac |
| target_has_targetdm=yes |
| ;; |
| *-*-*vms*) |
| extra_options="${extra_options} vms/vms.opt" |
| xmake_file=vms/x-vms |
| tmake_file="vms/t-vms t-slibgcc" |
| extra_objs="vms.o" |
| target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.c" |
| tm_p_file="${tm_p_file} vms/vms-protos.h" |
| xm_file="vms/xm-vms.h" |
| c_target_objs="vms-c.o" |
| cxx_target_objs="vms-c.o" |
| fortran_target_objs="vms-f.o" |
| use_gcc_stdint=provide |
| tm_file="${tm_file} vms/vms-stdint.h" |
| if test x$gnu_ld != xyes; then |
| # Build wrappers for native case. |
| extra_programs="ld\$(exeext) ar\$(exeext)" |
| tmake_file="$tmake_file vms/t-vmsnative" |
| fi |
| ;; |
| *-*-vxworks*) |
| tmake_file=t-vxworks |
| xm_defines=POSIX |
| extra_options="${extra_options} vxworks.opt" |
| extra_objs="$extra_objs vxworks.o" |
| use_gcc_stdint=provide |
| tm_file="${tm_file} vxworks-stdint.h" |
| case ${enable_threads} in |
| no) ;; |
| "" | yes | vxworks) thread_file='vxworks' ;; |
| *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;; |
| esac |
| case $target in |
| *-*-vxworks7*) |
| tm_defines="$tm_defines TARGET_VXWORKS7=1" |
| ;; |
| esac |
| case $target in |
| *64-*-vxworks*) |
| tm_defines="$tm_defines TARGET_VXWORKS64=1" |
| ;; |
| esac |
| ;; |
| *-*-elf|arc*-*-elf*) |
| # Assume that newlib is being used and so __cxa_atexit is provided. |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| ;; |
| esac |
| |
| case ${target} in |
| aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h" |
| tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-elf-raw.h" |
| tmake_file="${tmake_file} aarch64/t-aarch64" |
| case $target in |
| aarch64-*-elf*) |
| use_gcc_stdint=wrap |
| ;; |
| aarch64-*-fuchsia*) |
| tm_file="${tm_file} fuchsia.h" |
| ;; |
| aarch64-*-rtems*) |
| tm_file="${tm_file} rtems.h aarch64/rtems.h" |
| ;; |
| esac |
| case $target in |
| aarch64_be-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| aarch64_multilibs="${with_multilib_list}" |
| if test "$aarch64_multilibs" = "default"; then |
| aarch64_multilibs="lp64,ilp32" |
| fi |
| aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'` |
| for aarch64_multilib in ${aarch64_multilibs}; do |
| case ${aarch64_multilib} in |
| ilp32 | lp64 ) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${aarch64_multilib} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| ;; |
| aarch64*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file}" |
| tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-freebsd.h" |
| tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-freebsd" |
| tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1" |
| ;; |
| aarch64*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h" |
| tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-linux.h" |
| tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-linux" |
| tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1" |
| case $target in |
| aarch64_be-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| aarch64_multilibs="${with_multilib_list}" |
| if test "$aarch64_multilibs" = "default"; then |
| # TODO: turn on ILP32 multilib build after its support is mature. |
| # aarch64_multilibs="lp64,ilp32" |
| aarch64_multilibs="lp64" |
| fi |
| aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'` |
| for aarch64_multilib in ${aarch64_multilibs}; do |
| case ${aarch64_multilib} in |
| ilp32 | lp64 ) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${aarch64_multilib} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| ;; |
| alpha*-*-linux*) |
| tm_file="elfos.h ${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h" |
| tmake_file="${tmake_file} alpha/t-linux alpha/t-alpha" |
| extra_options="${extra_options} alpha/elf.opt" |
| ;; |
| alpha*-*-netbsd*) |
| tm_file="elfos.h ${tm_file} ${nbsd_tm_file} alpha/elf.h alpha/netbsd.h" |
| tmake_file="${tmake_file} alpha/t-alpha" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt \ |
| alpha/elf.opt" |
| ;; |
| alpha*-*-openbsd*) |
| tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT" |
| tm_file="elfos.h alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h" |
| tmake_file="${tmake_file} alpha/t-alpha" |
| extra_options="${extra_options} openbsd.opt alpha/elf.opt" |
| # default x-alpha is only appropriate for dec-osf. |
| ;; |
| alpha*-dec-*vms*) |
| tm_file="${tm_file} vms/vms.h alpha/vms.h" |
| tmake_file="${tmake_file} alpha/t-vms alpha/t-alpha" |
| ;; |
| arc*-*-elf*) |
| tm_file="arc/arc-arch.h dbxelf.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}" |
| tmake_file="arc/t-multilib arc/t-arc" |
| extra_gcc_objs="driver-arc.o" |
| if test "x$with_cpu" != x; then |
| tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu" |
| fi |
| if test x${with_endian} = x; then |
| case ${target} in |
| arc*be-*-* | arc*eb-*-*) with_endian=big ;; |
| *) with_endian=little ;; |
| esac |
| fi |
| case ${with_endian} in |
| big|little) ;; |
| *) echo "with_endian=${with_endian} not supported."; exit 1 ;; |
| esac |
| case ${with_endian} in |
| big*) tm_file="arc/big.h ${tm_file}" |
| esac |
| ;; |
| arc*-*-linux*) |
| tm_file="arc/arc-arch.h dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}" |
| tmake_file="${tmake_file} arc/t-multilib-linux arc/t-arc" |
| extra_gcc_objs="driver-arc.o" |
| if test "x$with_cpu" != x; then |
| tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu" |
| fi |
| if test x${with_endian} = x; then |
| case ${target} in |
| arc*be-*-* | arc*eb-*-*) with_endian=big ;; |
| *) with_endian=little ;; |
| esac |
| fi |
| case ${with_endian} in |
| big|little) ;; |
| *) echo "with_endian=${with_endian} not supported."; exit 1 ;; |
| esac |
| case ${with_endian} in |
| big*) tm_file="arc/big.h ${tm_file}" |
| esac |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| arm-wrs-vxworks|arm-wrs-vxworks7) |
| extra_options="${extra_options} arm/vxworks.opt" |
| tmake_file="${tmake_file} arm/t-arm arm/t-vxworks" |
| case $target in |
| *-vxworks7) |
| # VxWorks7 on ARM adheres to the ARM Base Platform ABI |
| tmake_file="${tmake_file} arm/t-bpabi" |
| tm_file="arm/bpabi.h ${tm_file}" |
| # The BPABI long long divmod functions return a 128-bit value in |
| # registers r0-r3. |
| need_64bit_hwint=yes |
| default_use_cxa_atexit=yes |
| ;; |
| *) ;; |
| esac |
| tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h" |
| target_cpu_cname="arm8" |
| ;; |
| arm*-*-freebsd*) # ARM FreeBSD EABI |
| tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h" |
| case $target in |
| arm*b-*-freebsd*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| tmake_file="${tmake_file} arm/t-arm arm/t-bpabi" |
| tm_file="${tm_file} arm/bpabi.h arm/freebsd.h arm/aout.h arm/arm.h" |
| case $target in |
| armv6*-*-freebsd*) |
| target_cpu_cname="arm1176jzf-s" |
| if test $fbsd_major -ge 11; then |
| tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1" |
| fi |
| ;; |
| armv7*-*-freebsd*) |
| target_cpu_cname="generic-armv7-a" |
| tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1" |
| ;; |
| *) |
| target_cpu_cname="arm9" |
| ;; |
| esac |
| with_tls=${with_tls:-gnu} |
| ;; |
| arm*-*-netbsdelf*) |
| tm_file="dbxelf.h elfos.h ${nbsd_tm_file} arm/elf.h arm/aout.h ${tm_file} arm/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| tmake_file="${tmake_file} arm/t-arm" |
| target_cpu_cname="strongarm" |
| ;; |
| arm*-*-linux-*) # ARM GNU/Linux with ELF |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" |
| extra_options="${extra_options} linux-android.opt" |
| case $target in |
| arm*b-*-linux*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi" |
| tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h arm/aout.h arm/arm.h" |
| # Generation of floating-point instructions requires at least ARMv5te. |
| if [ "$with_float" = "hard" -o "$with_float" = "softfp" ] ; then |
| target_cpu_cname="arm10e" |
| else |
| target_cpu_cname="arm10tdmi" |
| fi |
| # Define multilib configuration for arm-linux-androideabi. |
| case ${target} in |
| *-androideabi) |
| tmake_file="$tmake_file arm/t-linux-androideabi" |
| ;; |
| esac |
| # The EABI requires the use of __cxa_atexit. |
| default_use_cxa_atexit=yes |
| with_tls=${with_tls:-gnu} |
| ;; |
| arm*-*-uclinux*eabi*) # ARM ucLinux |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h" |
| tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi" |
| tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h arm/arm.h" |
| target_cpu_cname="arm7tdmi" |
| # The EABI requires the use of __cxa_atexit. |
| default_use_cxa_atexit=yes |
| ;; |
| arm*-*-phoenix*) |
| tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h" |
| tm_file="${tm_file} newlib-stdint.h phoenix.h" |
| tm_file="${tm_file} arm/aout.h arm/arm.h" |
| tmake_file="${tmake_file} arm/t-arm arm/t-bpabi arm/t-phoenix" |
| target_cpu_cname="arm7tdmi" |
| ;; |
| arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*) |
| case ${target} in |
| arm*eb-*-eabi*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| esac |
| default_use_cxa_atexit=yes |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h" |
| tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf" |
| target_cpu_cname="arm7tdmi" |
| case ${target} in |
| arm*-*-eabi*) |
| tm_file="$tm_file newlib-stdint.h" |
| tmake_file="${tmake_file} arm/t-bpabi" |
| use_gcc_stdint=wrap |
| ;; |
| arm*-*-fuchsia*) |
| tm_file="${tm_file} fuchsia.h arm/fuchsia-elf.h glibc-stdint.h" |
| tmake_file="${tmake_file} arm/t-bpabi arm/t-fuchsia" |
| target_cpu_cname="generic-armv7-a" |
| ;; |
| arm*-*-rtems*) |
| tm_file="${tm_file} rtems.h arm/rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} arm/t-bpabi arm/t-rtems" |
| ;; |
| arm*-*-symbianelf*) |
| tm_file="${tm_file} arm/symbian.h" |
| # We do not include t-bpabi for Symbian OS because the system |
| # provides its own implementation of the BPABI functions. |
| tmake_file="${tmake_file} arm/t-symbian" |
| target_cpu_cname="arm10tdmi" |
| ;; |
| esac |
| tm_file="${tm_file} arm/aout.h arm/arm.h" |
| ;; |
| avr-*-*) |
| tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h dbxelf.h avr/avr-stdint.h" |
| if test x${with_avrlibc} != xno; then |
| tm_file="${tm_file} ${cpu_type}/avrlibc.h" |
| tm_defines="${tm_defines} WITH_AVRLIBC" |
| fi |
| tmake_file="${tmake_file} avr/t-avr avr/t-multilib" |
| use_gcc_stdint=wrap |
| extra_gcc_objs="driver-avr.o avr-devices.o" |
| extra_objs="avr-devices.o avr-log.o" |
| ;; |
| bfin*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h" |
| tmake_file=bfin/t-bfin-elf |
| use_collect2=no |
| ;; |
| bfin*-uclinux*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h" |
| tmake_file=bfin/t-bfin-uclinux |
| use_collect2=no |
| ;; |
| bfin*-linux-uclibc*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h" |
| tmake_file="${tmake_file} bfin/t-bfin-linux" |
| use_collect2=no |
| ;; |
| bfin*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} bfin/t-rtems" |
| ;; |
| bfin*-*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h" |
| use_collect2=no |
| use_gcc_stdint=wrap |
| ;; |
| cr16-*-elf) |
| tm_file="elfos.h ${tm_file} newlib-stdint.h" |
| tmake_file="${tmake_file} cr16/t-cr16 " |
| use_collect2=no |
| ;; |
| crisv32-*-elf | crisv32-*-none) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="cris/t-cris" |
| target_cpu_default=32 |
| gas=yes |
| extra_options="${extra_options} cris/elf.opt" |
| use_gcc_stdint=wrap |
| ;; |
| cris-*-elf | cris-*-none) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="cris/t-cris cris/t-elfmulti" |
| gas=yes |
| extra_options="${extra_options} cris/elf.opt" |
| use_gcc_stdint=wrap |
| ;; |
| crisv32-*-linux* | cris-*-linux*) |
| tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h" |
| tmake_file="${tmake_file} cris/t-cris cris/t-linux" |
| extra_options="${extra_options} cris/linux.opt" |
| case $target in |
| cris-*-*) |
| target_cpu_default=10 |
| ;; |
| crisv32-*-*) |
| target_cpu_default=32 |
| ;; |
| esac |
| ;; |
| csky-*-*) |
| if test x${with_endian} != x; then |
| case ${with_endian} in |
| big|little) ;; |
| *) |
| echo "with_endian=${with_endian} not supported." |
| exit 1 |
| ;; |
| esac |
| fi |
| if test x${with_float} != x; then |
| case ${with_float} in |
| soft | hard) ;; |
| *) echo |
| "Unknown floating point type used in --with-float=$with_float" |
| exit 1 |
| ;; |
| esac |
| fi |
| tm_file="csky/csky.h" |
| md_file="csky/csky.md" |
| out_file="csky/csky.c" |
| tm_p_file="${tm_p_file} csky/csky-protos.h" |
| extra_options="${extra_options} csky/csky_tables.opt" |
| |
| if test x${enable_tpf_debug} = xyes; then |
| tm_defines="${tm_defines} ENABLE_TPF_DEBUG" |
| fi |
| |
| case ${target} in |
| csky-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h" |
| tmake_file="csky/t-csky csky/t-csky-elf" |
| default_use_cxa_atexit=no |
| ;; |
| csky-*-linux*) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h" |
| tmake_file="${tmake_file} csky/t-csky csky/t-csky-linux" |
| |
| if test "x${enable_multilib}" = xyes ; then |
| tm_file="$tm_file ./sysroot-suffix.h" |
| tmake_file="${tmake_file} csky/t-sysroot-suffix" |
| fi |
| |
| case ${target} in |
| csky-*-linux-gnu*) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC" |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| csky-*-linux-uclibc*) |
| tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC" |
| default_use_cxa_atexit=no |
| ;; |
| *) |
| echo "Unknown target $target" |
| exit 1 |
| ;; |
| esac |
| ;; |
| *) |
| echo "Unknown target $target" |
| exit 1 |
| ;; |
| esac |
| ;; |
| epiphany-*-elf | epiphany-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h" |
| tmake_file="${tmake_file} epiphany/t-epiphany" |
| case ${target} in |
| epiphany-*-rtems*) |
| tm_file="${tm_file} rtems.h epiphany/rtems.h newlib-stdint.h" |
| ;; |
| *) |
| tm_file="${tm_file} newlib-stdint.h" |
| ;; |
| esac |
| extra_options="${extra_options} fused-madd.opt" |
| extra_objs="${extra_objs} mode-switch-use.o resolve-sw-modes.o" |
| tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}" |
| extra_headers="epiphany_intrinsics.h" |
| ;; |
| fr30-*-elf) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| ;; |
| frv-*-elf) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file=frv/t-frv |
| ;; |
| frv-*-*linux*) |
| tm_file="dbxelf.h elfos.h ${tm_file} \ |
| gnu-user.h linux.h glibc-stdint.h frv/linux.h" |
| tmake_file="${tmake_file} frv/t-frv frv/t-linux" |
| ;; |
| ft32-*-elf) |
| gas=yes |
| gnu_ld=yes |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="${tmake_file} ft32/t-ft32" |
| ;; |
| amdgcn-*-amdhsa) |
| tm_file="elfos.h gcn/gcn-hsa.h gcn/gcn.h newlib-stdint.h" |
| tmake_file="gcn/t-gcn-hsa" |
| native_system_header_dir=/include |
| extra_modes=gcn/gcn-modes.def |
| extra_objs="${extra_objs} gcn-tree.o" |
| extra_gcc_objs="driver-gcn.o" |
| case "$host" in |
| x86_64*-*-linux-gnu ) |
| if test "$ac_cv_search_dlopen" != no; then |
| extra_programs="${extra_programs} gcn-run\$(exeext)" |
| fi |
| ;; |
| esac |
| if test x$enable_as_accelerator = xyes; then |
| extra_programs="${extra_programs} mkoffload\$(exeext)" |
| tm_file="${tm_file} gcn/offload.h" |
| fi |
| ;; |
| moxie-*-elf) |
| gas=yes |
| gnu_ld=yes |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="${tmake_file} moxie/t-moxie" |
| ;; |
| moxie-*-uclinux*) |
| gas=yes |
| gnu_ld=yes |
| tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h" |
| tmake_file="${tmake_file} moxie/t-moxie" |
| ;; |
| moxie-*-rtems*) |
| tmake_file="${tmake_file} moxie/t-moxie" |
| tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h" |
| ;; |
| moxie-*-moxiebox*) |
| gas=yes |
| gnu_ld=yes |
| tm_file="${tm_file} dbxelf.h elfos.h moxie/moxiebox.h newlib-stdint.h" |
| tmake_file="${tmake_file} moxie/t-moxiebox" |
| ;; |
| h8300-*-elf*) |
| tmake_file="h8300/t-h8300" |
| tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h" |
| ;; |
| h8300-*-linux*) |
| tmake_file="${tmake_file} h8300/t-h8300 h8300/t-linux" |
| tm_file="h8300/h8300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h h8300/linux.h" |
| ;; |
| hppa*64*-*-linux*) |
| target_cpu_default="MASK_PA_11|MASK_PA_20" |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \ |
| glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \ |
| pa/pa64-linux.h" |
| tmake_file="${tmake_file} pa/t-pa pa/t-linux" |
| d_target_objs="${d_target_objs} pa-d.o" |
| gas=yes gnu_ld=yes |
| ;; |
| hppa*-*-linux*) |
| target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS|MASK_CALLER_COPIES" |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \ |
| pa/pa32-regs.h pa/pa32-linux.h" |
| tmake_file="${tmake_file} pa/t-pa pa/t-linux" |
| d_target_objs="${d_target_objs} pa-d.o" |
| ;; |
| hppa*-*-openbsd*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} dbxelf.h elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \ |
| pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h" |
| extra_options="${extra_options} openbsd.opt" |
| tmake_file="pa/t-pa" |
| d_target_objs="${d_target_objs} pa-d.o" |
| gas=yes |
| gnu_ld=yes |
| ;; |
| hppa[12]*-*-hpux10*) |
| case ${target} in |
| hppa1.1-*-* | hppa2*-*-*) |
| target_cpu_default="MASK_PA_11" |
| ;; |
| esac |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ |
| pa/pa-hpux.h pa/pa-hpux10.h" |
| extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt" |
| case ${target} in |
| *-*-hpux10.[1-9]*) |
| tm_file="${tm_file} pa/pa-hpux1010.h" |
| extra_options="${extra_options} pa/pa-hpux1010.opt" |
| ;; |
| esac |
| use_gcc_stdint=provide |
| tm_file="${tm_file} hpux-stdint.h" |
| tmake_file="pa/t-pa t-slibgcc" |
| d_target_objs="${d_target_objs} pa-d.o" |
| case ${enable_threads} in |
| "") |
| if test x$have_pthread_h = xyes ; then |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| fi |
| ;; |
| yes | dce) |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| ;; |
| esac |
| use_collect2=yes |
| gas=yes |
| if test "x$with_dwarf2" != x; then |
| echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2 |
| dwarf2=no |
| fi |
| ;; |
| hppa*64*-*-hpux11*) |
| target_cpu_default="MASK_PA_11|MASK_PA_20" |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \ |
| pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \ |
| pa/pa-hpux11.h" |
| case ${target} in |
| *-*-hpux11.[12]*) |
| tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h" |
| extra_options="${extra_options} pa/pa-hpux1111.opt" |
| ;; |
| *-*-hpux11.[3-9]*) |
| tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h" |
| extra_options="${extra_options} pa/pa-hpux1131.opt" |
| ;; |
| *) |
| tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h" |
| ;; |
| esac |
| extra_options="${extra_options} pa/pa-hpux.opt \ |
| pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt" |
| tmake_file="pa/t-pa t-slibgcc" |
| d_target_objs="${d_target_objs} pa-d.o" |
| case x${enable_threads} in |
| x | xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| gas=yes |
| case ${target} in |
| *-*-hpux11.[01]*) |
| use_gcc_stdint=provide |
| tm_file="${tm_file} hpux-stdint.h" |
| ;; |
| *-*-hpux11.[23]*) |
| use_gcc_stdint=wrap |
| tm_file="${tm_file} hpux-stdint.h" |
| ;; |
| esac |
| ;; |
| hppa[12]*-*-hpux11*) |
| case ${target} in |
| hppa1.1-*-* | hppa2*-*-*) |
| target_cpu_default="MASK_PA_11" |
| ;; |
| esac |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ |
| pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h" |
| extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \ |
| hpux11.opt" |
| case ${target} in |
| *-*-hpux11.[12]*) |
| tm_file="${tm_file} pa/pa-hpux1111.h" |
| extra_options="${extra_options} pa/pa-hpux1111.opt" |
| ;; |
| *-*-hpux11.[3-9]*) |
| tm_file="${tm_file} pa/pa-hpux1131.h" |
| extra_options="${extra_options} pa/pa-hpux1131.opt" |
| ;; |
| esac |
| tmake_file="pa/t-pa t-slibgcc" |
| d_target_objs="${d_target_objs} pa-d.o" |
| case x${enable_threads} in |
| x | xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=yes |
| gas=yes |
| case ${target} in |
| *-*-hpux11.[01]*) |
| use_gcc_stdint=provide |
| tm_file="${tm_file} hpux-stdint.h" |
| ;; |
| *-*-hpux11.[23]*) |
| use_gcc_stdint=wrap |
| tm_file="${tm_file} hpux-stdint.h" |
| ;; |
| esac |
| if test "x$with_dwarf2" != x; then |
| echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2 |
| dwarf2=no |
| fi |
| ;; |
| i[34567]86-*-darwin1[89]*) |
| echo "Error: 32bit target is not supported after Darwin17" 1>&2 |
| ;; |
| i[34567]86-*-darwin*) |
| need_64bit_isa=yes |
| # Baseline choice for a machine that allows m64 support. |
| with_cpu=${with_cpu:-core2} |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch t-slibgcc" |
| tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h" |
| ;; |
| x86_64-*-darwin1[89]* | x86_64-*-darwin2[01]*) |
| # Only 64b from now |
| with_cpu=${with_cpu:-core2} |
| tmake_file="${tmake_file} t-slibgcc" |
| ;; |
| x86_64-*-darwin*) |
| with_cpu=${with_cpu:-core2} |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc" |
| tm_file="${tm_file} ${cpu_type}/darwin64-biarch.h" |
| ;; |
| i[34567]86-*-elfiamcu) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/iamcu.h" |
| ;; |
| i[34567]86-*-elf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h" |
| ;; |
| x86_64-*-elf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h" |
| ;; |
| x86_64-*-rtems*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h" |
| ;; |
| i[34567]86-*-rdos*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h" |
| ;; |
| x86_64-*-rdos*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h" |
| tmake_file="i386/t-i386elf t-svr4" |
| ;; |
| i[34567]86-*-dragonfly*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h" |
| tmake_file="${tmake_file} i386/t-crtstuff" |
| ;; |
| x86_64-*-dragonfly*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h" |
| tmake_file="${tmake_file} i386/t-crtstuff" |
| ;; |
| i[34567]86-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h" |
| ;; |
| x86_64-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h" |
| ;; |
| i[34567]86-*-netbsdelf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| ;; |
| x86_64-*-netbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| ;; |
| i[34567]86-*-openbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h" |
| tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h" |
| extra_options="${extra_options} openbsd.opt" |
| gas=yes |
| gnu_ld=yes |
| ;; |
| x86_64-*-openbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h" |
| tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h" |
| extra_options="${extra_options} openbsd.opt" |
| gas=yes |
| gnu_ld=yes |
| ;; |
| i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu) |
| # Intel 80386's running GNU/* |
| # with ELF format using glibc 2 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h" |
| case ${target} in |
| i[34567]86-*-linux*) |
| tm_file="${tm_file} linux.h linux-android.h" |
| extra_options="${extra_options} linux-android.opt" |
| if test x$enable_targets = xall; then |
| tm_file="${tm_file} i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h i386/linux-common.h i386/linux64.h" |
| tm_defines="${tm_defines} TARGET_BI_ARCH=1" |
| tmake_file="${tmake_file} i386/t-linux64" |
| x86_multilibs="${with_multilib_list}" |
| if test "$x86_multilibs" = "default"; then |
| x86_multilibs="m64,m32" |
| fi |
| x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'` |
| for x86_multilib in ${x86_multilibs}; do |
| case ${x86_multilib} in |
| m32 | m64 | mx32) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${x86_with_multilib} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| need_64bit_isa=yes |
| if test x$with_cpu = x; then |
| if test x$with_cpu_64 = x; then |
| with_cpu_64=generic |
| fi |
| else |
| case " $x86_cpus $x86_archs $x86_64_archs " in |
| *" $with_cpu "*) |
| ;; |
| *) |
| echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 |
| echo "$x86_cpus $x86_archs $x86_64_archs " 1>&2 |
| exit 1 |
| ;; |
| esac |
| fi |
| else |
| tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h i386/linux-common.h i386/linux.h" |
| fi |
| ;; |
| i[34567]86-*-kfreebsd*-gnu) |
| tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" |
| ;; |
| i[34567]86-*-kopensolaris*-gnu) |
| tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" |
| ;; |
| i[34567]86-*-gnu*) |
| tm_file="$tm_file i386/gnu-user-common.h i386/gnu-user.h gnu.h i386/gnu.h" |
| ;; |
| esac |
| ;; |
| x86_64-*-linux* | x86_64-*-kfreebsd*-gnu) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \ |
| i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h" |
| case ${target} in |
| x86_64-*-linux*) |
| tm_file="${tm_file} linux.h linux-android.h i386/linux-common.h i386/linux64.h" |
| extra_options="${extra_options} linux-android.opt" |
| ;; |
| x86_64-*-kfreebsd*-gnu) |
| tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h" |
| ;; |
| esac |
| tmake_file="${tmake_file} i386/t-linux64" |
| x86_multilibs="${with_multilib_list}" |
| if test "$x86_multilibs" = "default"; then |
| case ${with_abi} in |
| x32 | mx32) |
| x86_multilibs="mx32" |
| ;; |
| *) |
| x86_multilibs="m64,m32" |
| ;; |
| esac |
| fi |
| x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'` |
| for x86_multilib in ${x86_multilibs}; do |
| case ${x86_multilib} in |
| m32 | m64 | mx32) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${x86_with_multilib} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| ;; |
| i[34567]86-pc-msdosdjgpp*) |
| xm_file=i386/xm-djgpp.h |
| tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h" |
| native_system_header_dir=/dev/env/DJDIR/include |
| extra_options="${extra_options} i386/djgpp.opt" |
| gnu_ld=yes |
| gas=yes |
| use_gcc_stdint=wrap |
| ;; |
| i[34567]86-*-lynxos*) |
| xm_defines=POSIX |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h" |
| tmake_file="${tmake_file} t-lynx" |
| extra_options="${extra_options} lynx.opt" |
| thread_file=lynx |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[34567]86-*-nto-qnx*) |
| tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h" |
| extra_options="${extra_options} i386/nto.opt" |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[34567]86-*-rtems*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} i386/t-rtems" |
| ;; |
| i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*) |
| # Set default arch_32 to pentium4, tune_32 to generic like the other |
| # i386 targets, although config.guess defaults to i386-pc-solaris2*. |
| with_arch_32=${with_arch_32:-pentium4} |
| with_tune_32=${with_tune_32:-generic} |
| tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file_head} i386/x86-64.h ${sol2_tm_file_tail}" |
| tm_defines="${tm_defines} TARGET_BI_ARCH=1" |
| tmake_file="$tmake_file i386/t-sol2" |
| need_64bit_isa=yes |
| if test x$with_cpu = x; then |
| if test x$with_cpu_64 = x; then |
| with_cpu_64=generic |
| fi |
| else |
| case " $x86_cpus $x86_archs $x86_64_archs " in |
| *" $with_cpu "*) |
| ;; |
| *) |
| echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 |
| echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2 |
| exit 1 |
| ;; |
| esac |
| fi |
| ;; |
| i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae|i[4567]86-wrs-vxworks7|x86_64-wrs-vxworks7) |
| tm_file="${tm_file} i386/unix.h i386/att.h elfos.h" |
| case ${target} in |
| x86_64-*) |
| need_64bit_isa=yes |
| tm_file="${tm_file} i386/x86-64.h" |
| ;; |
| esac |
| tm_file="${tm_file} vx-common.h" |
| case ${target} in |
| *-vxworksae*) |
| tm_file="${tm_file} vxworksae.h i386/vxworks.h i386/vxworksae.h" |
| tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae" |
| ;; |
| *) |
| tm_file="${tm_file} vxworks.h i386/vxworks.h" |
| tmake_file="${tmake_file} i386/t-vxworks" |
| ;; |
| esac |
| ;; |
| i[34567]86-*-cygwin*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h" |
| xm_file=i386/xm-cygwin.h |
| tmake_file="${tmake_file} i386/t-cygming t-slibgcc" |
| target_gtfiles="\$(srcdir)/config/i386/winnt.c" |
| extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt" |
| extra_objs="${extra_objs} winnt.o winnt-stubs.o" |
| c_target_objs="${c_target_objs} msformat-c.o" |
| cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| ;; |
| x86_64-*-cygwin*) |
| need_64bit_isa=yes |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h" |
| xm_file=i386/xm-cygwin.h |
| tmake_file="${tmake_file} i386/t-cygming t-slibgcc i386/t-cygwin-w64" |
| target_gtfiles="\$(srcdir)/config/i386/winnt.c" |
| extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt" |
| extra_objs="${extra_objs} winnt.o winnt-stubs.o" |
| c_target_objs="${c_target_objs} msformat-c.o" |
| cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| tm_defines="${tm_defines} TARGET_CYGWIN64=1" |
| ;; |
| i[34567]86-*-mingw* | x86_64-*-mingw*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h" |
| xm_file=i386/xm-mingw32.h |
| c_target_objs="${c_target_objs} winnt-c.o" |
| cxx_target_objs="${cxx_target_objs} winnt-c.o" |
| target_has_targetcm="yes" |
| case ${target} in |
| x86_64-*-* | *-w64-*) |
| need_64bit_isa=yes |
| ;; |
| *) |
| ;; |
| esac |
| if test x$enable_threads = xposix ; then |
| tm_file="${tm_file} i386/mingw-pthread.h" |
| fi |
| tm_file="${tm_file} i386/mingw32.h" |
| # This makes the logic if mingw's or the w64 feature set has to be used |
| case ${target} in |
| *-w64-*) |
| user_headers_inc_next_post="${user_headers_inc_next_post} float.h" |
| user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h" |
| tm_file="${tm_file} i386/mingw-w64.h" |
| if test x$enable_targets = xall; then |
| tm_defines="${tm_defines} TARGET_BI_ARCH=1" |
| if test x$with_cpu = x; then |
| if test x$with_cpu_64 = x; then |
| with_cpu_64=generic |
| fi |
| else |
| case " $x86_cpus $x86_archs $x86_64_archs " in |
| *" $with_cpu "*) |
| ;; |
| *) |
| echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 |
| echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2 |
| exit 1 |
| ;; |
| esac |
| fi |
| fi |
| ;; |
| *) |
| ;; |
| esac |
| tm_file="${tm_file} i386/mingw-stdint.h" |
| tmake_file="${tmake_file} t-winnt i386/t-cygming t-slibgcc" |
| case ${target} in |
| x86_64-w64-*) |
| tmake_file="${tmake_file} i386/t-mingw-w64" |
| ;; |
| i[34567]86-w64-*) |
| tmake_file="${tmake_file} i386/t-mingw-w32" |
| ;; |
| esac |
| native_system_header_dir=/mingw/include |
| target_gtfiles="\$(srcdir)/config/i386/winnt.c" |
| extra_options="${extra_options} i386/cygming.opt i386/mingw.opt" |
| case ${target} in |
| *-w64-*) |
| extra_options="${extra_options} i386/mingw-w64.opt" |
| ;; |
| *) |
| ;; |
| esac |
| extra_objs="${extra_objs} winnt.o winnt-stubs.o" |
| c_target_objs="${c_target_objs} msformat-c.o" |
| cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o" |
| gas=yes |
| gnu_ld=yes |
| default_use_cxa_atexit=yes |
| use_gcc_stdint=wrap |
| case ${enable_threads} in |
| "" | yes | win32) |
| thread_file='win32' |
| ;; |
| posix) |
| thread_file='posix' |
| ;; |
| esac |
| case ${target} in |
| *mingw32crt*) |
| tm_file="${tm_file} i386/crtdll.h" |
| ;; |
| *mingw32msv* | *mingw*) |
| ;; |
| esac |
| ;; |
| x86_64-*-fuchsia*) |
| tmake_file="${tmake_file} i386/t-x86_64-elf" |
| tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h fuchsia.h" |
| ;; |
| ia64*-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h" |
| tmake_file="ia64/t-ia64" |
| target_cpu_default="0" |
| if test x$gas = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_AS" |
| fi |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| ;; |
| ia64*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h" |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| tmake_file="${tmake_file} ia64/t-ia64" |
| ;; |
| ia64*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h" |
| tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind" |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| ;; |
| ia64*-*-hpux*) |
| tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h" |
| tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc" |
| target_cpu_default="MASK_GNU_AS" |
| case x$enable_threads in |
| x | xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=no |
| c_target_objs="ia64-c.o" |
| cxx_target_objs="ia64-c.o" |
| extra_options="${extra_options} ia64/ilp32.opt hpux11.opt" |
| use_gcc_stdint=wrap |
| tm_file="${tm_file} hpux-stdint.h" |
| case ${target} in |
| *-*-hpux11.3*) |
| tm_file="${tm_file} ia64/hpux-unix2003.h" |
| ;; |
| esac |
| ;; |
| ia64-hp-*vms*) |
| tm_file="${tm_file} elfos.h ia64/sysv4.h vms/vms.h ia64/vms.h" |
| tmake_file="${tmake_file} ia64/t-ia64" |
| target_cpu_default="0" |
| if test x$gas = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_AS" |
| fi |
| extra_options="${extra_options} ia64/vms.opt" |
| ;; |
| iq2000*-*-elf*) |
| tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h" |
| out_file=iq2000/iq2000.c |
| md_file=iq2000/iq2000.md |
| ;; |
| lm32-*-elf*) |
| tm_file="dbxelf.h elfos.h ${tm_file} newlib-stdint.h" |
| tmake_file="${tmake_file} lm32/t-lm32" |
| ;; |
| lm32-*-rtems*) |
| tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} lm32/t-lm32" |
| tmake_file="${tmake_file} lm32/t-rtems" |
| ;; |
| lm32-*-uclinux*) |
| tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h" |
| tmake_file="${tmake_file} lm32/t-lm32" |
| ;; |
| m32r-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| ;; |
| m32rle-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}" |
| ;; |
| m32r-*-linux*) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h" |
| tmake_file="${tmake_file} m32r/t-linux t-slibgcc" |
| gnu_ld=yes |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| m32rle-*-linux*) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h" |
| tmake_file="${tmake_file} m32r/t-linux t-slibgcc" |
| gnu_ld=yes |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| m68k-*-elf* | fido-*-elf*) |
| case ${target} in |
| fido-*-elf*) |
| # Check that $with_cpu makes sense. |
| case $with_cpu in |
| "" | "fidoa") |
| ;; |
| *) |
| echo "Cannot accept --with-cpu=$with_cpu" |
| exit 1 |
| ;; |
| esac |
| with_cpu=fidoa |
| ;; |
| *) |
| default_m68k_cpu=68020 |
| default_cf_cpu=5206 |
| ;; |
| esac |
| tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h" |
| tm_defines="${tm_defines} MOTOROLA=1" |
| tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf" |
| # Add multilibs for targets other than fido. |
| case ${target} in |
| fido-*-elf*) |
| ;; |
| *) |
| tmake_file="$tmake_file m68k/t-mlibs" |
| ;; |
| esac |
| ;; |
| m68k*-*-netbsdelf*) |
| default_m68k_cpu=68020 |
| default_cf_cpu=5475 |
| tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| tm_defines="${tm_defines} MOTOROLA=1 CHAR_FAST8=1 SHORT_FAST16=1" |
| ;; |
| m68k*-*-openbsd*) |
| default_m68k_cpu=68020 |
| default_cf_cpu=5475 |
| # needed to unconfuse gdb |
| tm_defines="${tm_defines} OBSD_OLD_GAS" |
| tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h" |
| extra_options="${extra_options} openbsd.opt" |
| tmake_file="t-openbsd m68k/t-openbsd" |
| # we need collect2 until our bug is fixed... |
| use_collect2=yes |
| ;; |
| m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux |
| # with uClibc, using the new GNU/Linux-style |
| # ABI. |
| default_m68k_cpu=68020 |
| default_cf_cpu=5206 |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h" |
| extra_options="${extra_options} m68k/uclinux.opt" |
| tm_defines="${tm_defines} MOTOROLA=1" |
| tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs" |
| ;; |
| m68k-*-linux*) # Motorola m68k's running GNU/Linux |
| # with ELF format using glibc 2 |
| # aka the GNU/Linux C library 6. |
| default_m68k_cpu=68020 |
| default_cf_cpu=5475 |
| with_arch=${with_arch:-m68k} |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h" |
| extra_options="${extra_options} m68k/ieee.opt" |
| tm_defines="${tm_defines} MOTOROLA=1" |
| tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs" |
| ;; |
| m68k-*-rtems*) |
| default_m68k_cpu=68020 |
| default_cf_cpu=5206 |
| tmake_file="${tmake_file} m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff m68k/t-rtems m68k/t-mlibs" |
| tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h" |
| tm_defines="${tm_defines} MOTOROLA=1" |
| ;; |
| mcore-*-elf) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h" |
| tmake_file=mcore/t-mcore |
| inhibit_libc=true |
| ;; |
| microblaze*-linux*) |
| case $target in |
| microblazeel-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0" |
| ;; |
| microblaze-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321" |
| ;; |
| esac |
| tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h" |
| tm_file="${tm_file} glibc-stdint.h" |
| c_target_objs="${c_target_objs} microblaze-c.o" |
| cxx_target_objs="${cxx_target_objs} microblaze-c.o" |
| tmake_file="${tmake_file} microblaze/t-microblaze" |
| tmake_file="${tmake_file} microblaze/t-microblaze-linux" |
| ;; |
| microblaze*-*-rtems*) |
| case $target in |
| microblazeel-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0" |
| ;; |
| microblaze-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321" |
| ;; |
| esac |
| tm_file="${tm_file} dbxelf.h" |
| tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h" |
| c_target_objs="${c_target_objs} microblaze-c.o" |
| cxx_target_objs="${cxx_target_objs} microblaze-c.o" |
| tmake_file="${tmake_file} microblaze/t-microblaze" |
| tmake_file="${tmake_file} microblaze/t-rtems" |
| ;; |
| microblaze*-*-elf) |
| case $target in |
| microblazeel-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0" |
| ;; |
| microblaze-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321" |
| ;; |
| esac |
| tm_file="${tm_file} dbxelf.h newlib-stdint.h" |
| c_target_objs="${c_target_objs} microblaze-c.o" |
| cxx_target_objs="${cxx_target_objs} microblaze-c.o" |
| tmake_file="${tmake_file} microblaze/t-microblaze" |
| ;; |
| riscv*-*-linux*) |
| tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} riscv/linux.h" |
| case "x${enable_multilib}" in |
| xno) ;; |
| xyes) tmake_file="${tmake_file} riscv/t-linux-multilib" ;; |
| *) echo "Unknown value for enable_multilib"; exit 1 |
| esac |
| tmake_file="${tmake_file} riscv/t-riscv riscv/t-linux" |
| gnu_ld=yes |
| gas=yes |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| riscv*-*-elf* | riscv*-*-rtems*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} riscv/elf.h" |
| case ${target} in |
| *-*-rtems*) |
| tm_file="${tm_file} rtems.h riscv/rtems.h" |
| tmake_file="${tmake_file} riscv/t-rtems" |
| ;; |
| *) |
| case "x${enable_multilib}" in |
| xno) ;; |
| xyes) tmake_file="${tmake_file} riscv/t-elf-multilib" ;; |
| *) echo "Unknown value for enable_multilib"; exit 1 |
| esac |
| esac |
| tmake_file="${tmake_file} riscv/t-riscv" |
| gnu_ld=yes |
| gas=yes |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| riscv*-*-freebsd*) |
| tm_file="${tm_file} elfos.h ${fbsd_tm_file} riscv/freebsd.h" |
| tmake_file="${tmake_file} riscv/t-riscv" |
| gnu_ld=yes |
| gas=yes |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| ;; |
| mips*-*-netbsd*) # NetBSD/mips, either endian. |
| target_cpu_default="MASK_ABICALLS" |
| tm_file="elfos.h ${tm_file} mips/elf.h ${nbsd_tm_file} mips/netbsd.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| ;; |
| mips*-img-linux*) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h" |
| extra_options="${extra_options} linux-android.opt" |
| tmake_file="${tmake_file} mips/t-img-linux" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=37 MIPS_ABI_DEFAULT=ABI_32" |
| with_arch_32="mips32r6" |
| with_arch_64="mips64r6" |
| gnu_ld=yes |
| gas=yes |
| ;; |
| mips*-mti-linux*) |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h" |
| extra_options="${extra_options} linux-android.opt" |
| tmake_file="${tmake_file} mips/t-mti-linux" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32" |
| with_arch_32="mips32r2" |
| with_arch_64="mips64r2" |
| gnu_ld=yes |
| gas=yes |
| ;; |
| mips*-*-linux*) # Linux MIPS, either endian. |
| tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h" |
| extra_options="${extra_options} linux-android.opt" |
| case ${target} in |
| mipsisa32r6*) |
| default_mips_arch=mips32r6 |
| ;; |
| mipsisa32r2*) |
| default_mips_arch=mips32r2 |
| ;; |
| mipsisa32*) |
| default_mips_arch=mips32 |
| ;; |
| mips64el-st-linux-gnu) |
| default_mips_abi=n32 |
| tm_file="${tm_file} mips/st.h" |
| tmake_file="${tmake_file} mips/t-st" |
| enable_mips_multilibs="yes" |
| ;; |
| mips64octeon*-*-linux*) |
| default_mips_abi=n32 |
| tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\"" |
| target_cpu_default=MASK_SOFT_FLOAT_ABI |
| enable_mips_multilibs="yes" |
| ;; |
| mipsisa64r6*-*-linux*) |
| default_mips_abi=n32 |
| default_mips_arch=mips64r6 |
| enable_mips_multilibs="yes" |
| ;; |
| mipsisa64r2*-*-linux*) |
| default_mips_abi=n32 |
| default_mips_arch=mips64r2 |
| enable_mips_multilibs="yes" |
| ;; |
| mips64*-*-linux* | mipsisa64*-*-linux*) |
| default_mips_abi=n32 |
| enable_mips_multilibs="yes" |
| ;; |
| esac |
| if test x$enable_targets = xall; then |
| enable_mips_multilibs="yes" |
| fi |
| if test x$enable_mips_multilibs = xyes; then |
| tmake_file="${tmake_file} mips/t-linux64" |
| fi |
| ;; |
| mips*-mti-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h" |
| tmake_file="mips/t-mti-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32" |
| with_arch_32="mips32r2" |
| with_arch_64="mips64r2" |
| ;; |
| mips*-img-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h" |
| tmake_file="mips/t-img-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=37 MIPS_ABI_DEFAULT=ABI_32" |
| with_arch_32="mips32r6" |
| with_arch_64="mips64r6" |
| ;; |
| mips*-sde-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h" |
| tmake_file="mips/t-sde" |
| extra_options="${extra_options} mips/sde.opt" |
| case "${with_newlib}" in |
| yes) |
| # newlib / libgloss. |
| ;; |
| *) |
| # MIPS toolkit libraries. |
| tm_file="$tm_file mips/sdemtk.h" |
| tmake_file="$tmake_file mips/t-sdemtk" |
| case ${enable_threads} in |
| "" | yes | mipssde) |
| thread_file='mipssde' |
| ;; |
| esac |
| ;; |
| esac |
| case ${target} in |
| mipsisa32r6*) |
| tm_defines="MIPS_ISA_DEFAULT=37 MIPS_ABI_DEFAULT=ABI_32" |
| ;; |
| mipsisa32r2*) |
| tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32" |
| ;; |
| mipsisa32*) |
| tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32" |
| ;; |
| mipsisa64r6*) |
| tm_defines="MIPS_ISA_DEFAULT=69 MIPS_ABI_DEFAULT=ABI_N32" |
| ;; |
| mipsisa64r2*) |
| tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32" |
| ;; |
| mipsisa64*) |
| tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32" |
| ;; |
| esac |
| ;; |
| mipsisa32-*-elf* | mipsisa32el-*-elf* | \ |
| mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \ |
| mipsisa32r6-*-elf* | mipsisa32r6el-*-elf* | \ |
| mipsisa64-*-elf* | mipsisa64el-*-elf* | \ |
| mipsisa64r2-*-elf* | mipsisa64r2el-*-elf* | \ |
| mipsisa64r6-*-elf* | mipsisa64r6el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file="mips/t-isa3264" |
| case ${target} in |
| mipsisa32r6*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=37" |
| ;; |
| mipsisa32r2*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33" |
| ;; |
| mipsisa32*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32" |
| ;; |
| mipsisa64r6*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=69" |
| ;; |
| mipsisa64r2*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65" |
| ;; |
| mipsisa64*) |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64" |
| ;; |
| esac |
| case ${target} in |
| mipsisa32*-*-elfoabi*) |
| tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32" |
| tm_file="${tm_file} mips/elfoabi.h" |
| ;; |
| mipsisa64*-*-elfoabi*) |
| tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64" |
| tm_file="${tm_file} mips/elfoabi.h" |
| ;; |
| *-*-elf*) |
| tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI" |
| ;; |
| esac |
| ;; |
| mipsisa64sr71k-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-sr71k |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI" |
| ;; |
| mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file="mips/t-elf mips/t-sb1" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64" |
| ;; |
| mips-*-elf* | mipsel-*-elf* | mipsr5900-*-elf* | mipsr5900el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file="mips/t-elf" |
| ;; |
| mips64r5900-*-elf* | mips64r5900el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h" |
| tmake_file="mips/t-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32" |
| ;; |
| mips64-*-elf* | mips64el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" |
| tmake_file="mips/t-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" |
| ;; |
| mips64vr-*-elf* | mips64vrel-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h" |
| tmake_file=mips/t-vr |
| tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI" |
| ;; |
| mips64orion-*-elf* | mips64orionel-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h" |
| tmake_file="mips/t-elf" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" |
| ;; |
| mips*-*-rtems*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h" |
| tmake_file="${tmake_file} mips/t-elf mips/t-rtems" |
| ;; |
| mips-wrs-vxworks) |
| tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h" |
| tmake_file="${tmake_file} mips/t-vxworks" |
| ;; |
| mipstx39-*-elf* | mipstx39el-*-elf*) |
| tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h" |
| tmake_file="mips/t-r3900" |
| ;; |
| mmix-knuth-mmixware) |
| tm_file="${tm_file} newlib-stdint.h" |
| use_gcc_stdint=wrap |
| ;; |
| mn10300-*-*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| use_gcc_stdint=wrap |
| ;; |
| msp430*-*-*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| c_target_objs="msp430-c.o" |
| cxx_target_objs="msp430-c.o" |
| tmake_file="${tmake_file} msp430/t-msp430" |
| extra_gcc_objs="driver-msp430.o" |
| ;; |
| nds32*-*-*) |
| target_cpu_default="0" |
| tm_defines="${tm_defines}" |
| case ${target} in |
| nds32le*-*-*) |
| ;; |
| nds32be-*-*) |
| target_cpu_default="${target_cpu_default}|MASK_BIG_ENDIAN" |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| case ${target} in |
| nds32*-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h" |
| tmake_file="nds32/t-nds32 nds32/t-elf" |
| ;; |
| nds32*-*-linux*) |
| tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h" |
| tmake_file="${tmake_file} nds32/t-nds32 nds32/t-linux" |
| gcc_cv_initfini_array=yes |
| ;; |
| esac |
| |
| # Handle --enable-default-relax setting. |
| if test x${enable_default_relax} = xyes; then |
| tm_defines="${tm_defines} TARGET_DEFAULT_RELAX=1" |
| fi |
| # Handle --with-ext-dsp |
| if test x${with_ext_dsp} = xyes; then |
| tm_defines="${tm_defines} TARGET_DEFAULT_EXT_DSP=1" |
| fi |
| ;; |
| nios2-*-*) |
| tm_file="elfos.h ${tm_file}" |
| tmake_file="${tmake_file} nios2/t-nios2" |
| case ${target} in |
| nios2-*-linux*) |
| tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h nios2/linux.h " |
| ;; |
| nios2-*-elf*) |
| tm_file="${tm_file} newlib-stdint.h nios2/elf.h" |
| extra_options="${extra_options} nios2/elf.opt" |
| ;; |
| nios2-*-rtems*) |
| tm_file="${tm_file} newlib-stdint.h nios2/rtems.h rtems.h" |
| tmake_file="${tmake_file} t-rtems nios2/t-rtems" |
| ;; |
| esac |
| ;; |
| nvptx-*) |
| tm_file="${tm_file} newlib-stdint.h" |
| use_gcc_stdint=wrap |
| tmake_file="nvptx/t-nvptx" |
| if test x$enable_as_accelerator = xyes; then |
| extra_programs="${extra_programs} mkoffload\$(exeext)" |
| tm_file="${tm_file} nvptx/offload.h" |
| fi |
| ;; |
| or1k*-*-*) |
| tm_file="elfos.h ${tm_file}" |
| tmake_file="${tmake_file} or1k/t-or1k" |
| # Force .init_array support. The configure script cannot always |
| # automatically detect that GAS supports it, yet we require it. |
| gcc_cv_initfini_array=yes |
| |
| # Handle --with-multilib-list=... |
| or1k_multilibs="${with_multilib_list}" |
| if test "$or1k_multilibs" = "default"; then |
| or1k_multilibs="mcmov,msoft-mul,msoft-div" |
| fi |
| or1k_multilibs=`echo $or1k_multilibs | sed -e 's/,/ /g'` |
| for or1k_multilib in ${or1k_multilibs}; do |
| case ${or1k_multilib} in |
| mcmov | msext | msfimm | \ |
| mhard-div | mhard-mul | \ |
| msoft-div | msoft-mul ) |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${or1k_multilib}" |
| ;; |
| *) |
| echo "--with-multilib-list=${with_multilib_list} not supported." |
| exit 1 |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` |
| |
| case ${target} in |
| or1k*-*-linux*) |
| tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h" |
| tm_file="${tm_file} or1k/linux.h" |
| ;; |
| or1k*-*-elf*) |
| tm_file="${tm_file} newlib-stdint.h or1k/elf.h" |
| extra_options="${extra_options} or1k/elf.opt" |
| ;; |
| or1k*-*-rtems*) |
| tm_file="${tm_file} newlib-stdint.h or1k/rtems.h rtems.h" |
| tmake_file="${tmake_file} or1k/t-rtems" |
| ;; |
| esac |
| ;; |
| pdp11-*-*) |
| tm_file="${tm_file} newlib-stdint.h" |
| use_gcc_stdint=wrap |
| ;; |
| # port not yet contributed |
| #powerpc-*-openbsd*) |
| # tmake_file="${tmake_file} rs6000/t-fprules" |
| # extra_headers= |
| # ;; |
| powerpc-*-darwin*) |
| extra_options="${extra_options} ${cpu_type}/darwin.opt" |
| case ${target} in |
| *-darwin1[0-9]* | *-darwin9*) |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch" |
| tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h" |
| ;; |
| *-darwin8*) |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch" |
| tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h" |
| tm_file="${tm_file} ${cpu_type}/darwin8.h" |
| ;; |
| *-darwin7*) |
| tm_file="${tm_file} ${cpu_type}/darwin7.h" |
| ;; |
| *-darwin[456]*) |
| # Earlier - ingle arch, with 32b only |
| # OS X 10.0, the first edition is Darwin4 |
| ;; |
| esac |
| tmake_file="${tmake_file} t-slibgcc" |
| ;; |
| powerpc64-*-darwin*) |
| extra_options="${extra_options} ${cpu_type}/darwin.opt" |
| tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc" |
| tm_file="${tm_file} ${cpu_type}/darwin64-biarch.h" |
| ;; |
| powerpc*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" |
| case ${target} in |
| powerpc*le-*-*) |
| tm_file="${tm_file} rs6000/sysv4le.h" ;; |
| esac |
| case ${target} in |
| powerpc64*) |
| tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h" |
| tmake_file="${tmake_file} rs6000/t-freebsd64" |
| extra_options="${extra_options} rs6000/linux64.opt" |
| ;; |
| *) |
| tm_file="${tm_file} rs6000/freebsd.h" |
| ;; |
| esac |
| ;; |
| powerpc-*-netbsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| tmake_file="${tmake_file} rs6000/t-netbsd" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| powerpc-*-eabisimaltivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm" |
| use_gcc_stdint=wrap |
| ;; |
| powerpc-*-eabisim*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| use_gcc_stdint=wrap |
| ;; |
| powerpc-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabialtivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm" |
| use_gcc_stdint=wrap |
| ;; |
| powerpc-*-eabi*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| use_gcc_stdint=wrap |
| ;; |
| powerpc-*-rtems*) |
| tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h" |
| extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt" |
| tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-rtems rs6000/t-ppccomm" |
| ;; |
| powerpc*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm" |
| extra_objs="$extra_objs rs6000-linux.o" |
| case ${target} in |
| powerpc*le-*-*) |
| tm_file="${tm_file} rs6000/sysv4le.h" ;; |
| esac |
| case ${target}:${with_cpu} in |
| powerpc64*: | powerpc64*:native) cpu_is_64bit=yes ;; |
| esac |
| maybe_biarch=${cpu_is_64bit} |
| case ${enable_targets} in |
| *powerpc64*) maybe_biarch=yes ;; |
| all) maybe_biarch=yes ;; |
| esac |
| case ${target}:${enable_targets}:${maybe_biarch} in |
| powerpc64-* | powerpc-*:*:yes | *:*powerpc64-*:yes | *:all:yes \ |
| | powerpc64le*:*powerpcle* | powerpc64le*:*powerpc-* \ |
| | powerpcle-*:*powerpc64le*:yes) |
| if test x$cpu_is_64bit = xyes; then |
| tm_file="${tm_file} rs6000/default64.h" |
| fi |
| tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h" |
| tmake_file="$tmake_file rs6000/t-linux64" |
| case ${target} in |
| powerpc*le-*-*) |
| tmake_file="$tmake_file rs6000/t-linux64le" |
| case ${enable_targets} in |
| all | *powerpc64-* | *powerpc-*) |
| tmake_file="$tmake_file rs6000/t-linux64lebe" ;; |
| esac ;; |
| *) |
| case ${enable_targets} in |
| all | *powerpc64le-* | *powerpcle-*) |
| tmake_file="$tmake_file rs6000/t-linux64bele" ;; |
| esac ;; |
| esac |
| extra_options="${extra_options} rs6000/linux64.opt" |
| ;; |
| powerpc64*) |
| tm_file="${tm_file} rs6000/default64.h rs6000/linux64.h glibc-stdint.h" |
| extra_options="${extra_options} rs6000/linux64.opt" |
| tmake_file="${tmake_file} rs6000/t-linux" |
| ;; |
| *) |
| tm_file="${tm_file} rs6000/linux.h glibc-stdint.h" |
| tmake_file="${tmake_file} rs6000/t-ppcos rs6000/t-linux" |
| ;; |
| esac |
| case ${target} in |
| powerpc*-*-linux*ppc476*) |
| tm_file="${tm_file} rs6000/476.h" |
| extra_options="${extra_options} rs6000/476.opt" ;; |
| powerpc*-*-linux*altivec*) |
| tm_file="${tm_file} rs6000/linuxaltivec.h" ;; |
| esac |
| case ${target} in |
| *-linux*-musl*) |
| enable_secureplt=yes ;; |
| esac |
| if test x${enable_secureplt} = xyes; then |
| tm_file="rs6000/secureplt.h ${tm_file}" |
| fi |
| ;; |
| powerpc-wrs-vxworks*) |
| tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h rs6000/sysv4.h" |
| tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| extra_headers=ppc-asm.h |
| case ${target} in |
| *-vxworksmils*) |
| tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksmils.h" |
| tmake_file="${tmake_file} rs6000/t-vxworksmils" |
| ;; |
| *-vxworksae*) |
| tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h" |
| tmake_file="${tmake_file} rs6000/t-vxworksae" |
| ;; |
| *-vxworks*) |
| tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h" |
| ;; |
| esac |
| ;; |
| powerpc-*-lynxos*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h rs6000/sysv4.h rs6000/lynx.h lynx.h" |
| tmake_file="t-lynx rs6000/t-lynx" |
| extra_options="${extra_options} rs6000/sysv4.opt lynx.opt" |
| thread_file=lynx |
| gnu_ld=yes |
| gas=yes |
| ;; |
| powerpcle-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| powerpcle-*-eabisim*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| use_gcc_stdint=wrap |
| ;; |
| powerpcle-*-eabi*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| use_gcc_stdint=wrap |
| ;; |
| rs6000-ibm-aix6.* | powerpc-ibm-aix6.*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h" |
| tmake_file="rs6000/t-aix52 t-slibgcc" |
| extra_options="${extra_options} rs6000/aix64.opt" |
| use_collect2=yes |
| thread_file='aix' |
| use_gcc_stdint=wrap |
| default_use_cxa_atexit=yes |
| ;; |
| rs6000-ibm-aix7.1.* | powerpc-ibm-aix7.1.*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix71.h rs6000/xcoff.h rs6000/aix-stdint.h" |
| tmake_file="rs6000/t-aix52 t-slibgcc" |
| extra_options="${extra_options} rs6000/aix64.opt" |
| use_collect2=yes |
| thread_file='aix' |
| use_gcc_stdint=wrap |
| default_use_cxa_atexit=yes |
| ;; |
| rs6000-ibm-aix[789].* | powerpc-ibm-aix[789].*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix72.h rs6000/xcoff.h rs6000/aix-stdint.h" |
| tmake_file="rs6000/t-aix52 t-slibgcc" |
| extra_options="${extra_options} rs6000/aix64.opt" |
| use_collect2=yes |
| thread_file='aix' |
| use_gcc_stdint=wrap |
| default_use_cxa_atexit=yes |
| ;; |
| rl78-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| target_has_targetm_common=no |
| c_target_objs="rl78-c.o" |
| cxx_target_objs="rl78-c.o" |
| tmake_file="${tmake_file} rl78/t-rl78" |
| ;; |
| rx-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| tmake_file="${tmake_file} rx/t-rx" |
| ;; |
| s390-*-linux*) |
| tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h" |
| c_target_objs="${c_target_objs} s390-c.o" |
| cxx_target_objs="${cxx_target_objs} s390-c.o" |
| if test x$enable_targets = xall; then |
| tmake_file="${tmake_file} s390/t-linux64" |
| fi |
| tmake_file="${tmake_file} s390/t-s390" |
| ;; |
| s390x-*-linux*) |
| tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h" |
| tm_p_file="linux-protos.h s390/s390-protos.h" |
| c_target_objs="${c_target_objs} s390-c.o" |
| cxx_target_objs="${cxx_target_objs} s390-c.o" |
| md_file=s390/s390.md |
| extra_modes=s390/s390-modes.def |
| out_file=s390/s390.c |
| tmake_file="${tmake_file} s390/t-linux64 s390/t-s390" |
| ;; |
| s390x-ibm-tpf*) |
| tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h" |
| tm_p_file=s390/s390-protos.h |
| c_target_objs="${c_target_objs} s390-c.o" |
| cxx_target_objs="${cxx_target_objs} s390-c.o" |
| md_file=s390/s390.md |
| extra_modes=s390/s390-modes.def |
| out_file=s390/s390.c |
| thread_file='tpf' |
| extra_options="${extra_options} s390/tpf.opt" |
| tmake_file="${tmake_file} s390/t-s390" |
| ;; |
| sh-*-elf* | sh[12346l]*-*-elf* | \ |
| sh-*-linux* | sh[2346lbe]*-*-linux* | \ |
| sh-*-netbsdelf* | shl*-*-netbsdelf*) |
| tmake_file="${tmake_file} sh/t-sh sh/t-elf" |
| if test x${with_endian} = x; then |
| case ${target} in |
| sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;; |
| shbe-*-* | sheb-*-*) with_endian=big,little ;; |
| sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;; |
| shl* | sh*-*-linux* | \ |
| sh-superh-elf) with_endian=little,big ;; |
| sh[1234]*-*-*) with_endian=big ;; |
| *) with_endian=big,little ;; |
| esac |
| fi |
| # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs. |
| # First word : the default endian. |
| # Second word: the secondary endian (optional). |
| case ${with_endian} in |
| big) TM_ENDIAN_CONFIG=mb ;; |
| little) TM_ENDIAN_CONFIG=ml ;; |
| big,little) TM_ENDIAN_CONFIG="mb ml" ;; |
| little,big) TM_ENDIAN_CONFIG="ml mb" ;; |
| *) echo "with_endian=${with_endian} not supported."; exit 1 ;; |
| esac |
| case ${with_endian} in |
| little*) tm_file="sh/little.h ${tm_file}" ;; |
| esac |
| tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h" |
| case ${target} in |
| sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux" |
| if test x$enable_fdpic = xyes; then |
| tm_defines="$tm_defines FDPIC_DEFAULT=1" |
| fi |
| tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;; |
| sh*-*-netbsd*) |
| tm_file="${tm_file} ${nbsd_tm_file} sh/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| |
| ;; |
| sh*-superh-elf) if test x$with_libgloss != xno; then |
| with_libgloss=yes |
| tm_file="${tm_file} sh/newlib.h" |
| fi |
| tm_file="${tm_file} sh/embed-elf.h" |
| tm_file="${tm_file} sh/superh.h" |
| extra_options="${extra_options} sh/superh.opt" ;; |
| *) if test x$with_newlib = xyes \ |
| && test x$with_libgloss = xyes; then |
| tm_file="${tm_file} sh/newlib.h" |
| fi |
| tm_file="${tm_file} sh/embed-elf.h" ;; |
| esac |
| case ${target} in |
| *-*-netbsd) |
| ;; |
| *-*-elf*) |
| tm_file="${tm_file} newlib-stdint.h" |
| ;; |
| esac |
| # sed el/eb endian suffixes away to avoid confusion with sh[23]e |
| case `echo ${target} | sed 's/e[lb]-/-/'` in |
| sh4a_single_only*) sh_cpu_target=sh4a-single-only ;; |
| sh4a_single*) sh_cpu_target=sh4a-single ;; |
| sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;; |
| sh4al) sh_cpu_target=sh4al ;; |
| sh4a*) sh_cpu_target=sh4a ;; |
| sh4_single_only*) sh_cpu_target=sh4-single-only ;; |
| sh4_single*) sh_cpu_target=sh4-single ;; |
| sh4_nofpu*) sh_cpu_target=sh4-nofpu ;; |
| sh4* | sh-superh-*) sh_cpu_target=sh4 ;; |
| sh3e*) sh_cpu_target=sh3e ;; |
| sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;; |
| sh2a_single_only*) sh_cpu_target=sh2a-single-only ;; |
| sh2a_single*) sh_cpu_target=sh2a-single ;; |
| sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;; |
| sh2a*) sh_cpu_target=sh2a ;; |
| sh2e*) sh_cpu_target=sh2e ;; |
| sh2*) sh_cpu_target=sh2 ;; |
| *) sh_cpu_target=sh1 ;; |
| esac |
| # did the user say --without-fp ? |
| if test x$with_fp = xno; then |
| case ${sh_cpu_target} in |
| sh4al | sh1) ;; |
| sh4a* ) sh_cpu_target=sh4a-nofpu ;; |
| sh4*) sh_cpu_target=sh4-nofpu ;; |
| sh3*) sh_cpu_target=sh3 ;; |
| sh2a*) sh_cpu_target=sh2a-nofpu ;; |
| sh2*) sh_cpu_target=sh2 ;; |
| *) echo --without-fp not available for $target: ignored |
| esac |
| tm_defines="$tm_defines STRICT_NOFPU=1" |
| fi |
| sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`" |
| case $sh_cpu_default in |
| sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \ |
| sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \ |
| sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \ |
| sh3e | sh3 | sh2e | sh2 | sh1) ;; |
| "") sh_cpu_default=${sh_cpu_target} ;; |
| *) echo "with_cpu=$with_cpu not supported"; exit 1 ;; |
| esac |
| sh_multilibs=${with_multilib_list} |
| if test "$sh_multilibs" = "default" ; then |
| case ${target} in |
| sh[1234]*) sh_multilibs=${sh_cpu_target} ;; |
| sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;; |
| sh*-*-linux*) sh_multilibs=m1,m2,m2a,m3e,m4 ;; |
| sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;; |
| *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;; |
| esac |
| if test x$with_fp = xno; then |
| sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`" |
| fi |
| fi |
| target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_` |
| tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"' |
| tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1" |
| sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-` |
| for sh_multilib in ${sh_multilibs}; do |
| case ${sh_multilib} in |
| m1 | m2 | m2e | m3 | m3e | \ |
| m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\ |
| m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \ |
| m2a | m2a-single | m2a-single-only | m2a-nofpu) |
| # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition |
| # It is passed to MULTIILIB_OPTIONS verbatim. |
| TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}" |
| tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1" |
| ;; |
| \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh |
| # It is passed the MULTILIB_EXCEPTIONS verbatim. |
| TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;; |
| *) |
| echo "with_multilib_list=${sh_multilib} not supported." |
| exit 1 |
| ;; |
| esac |
| done |
| TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'` |
| if test x${enable_incomplete_targets} = xyes ; then |
| tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1" |
| fi |
| tm_file="$tm_file ./sysroot-suffix.h" |
| tmake_file="$tmake_file t-sysroot-suffix" |
| ;; |
| sh-*-rtems*) |
| tmake_file="${tmake_file} sh/t-sh sh/t-rtems" |
| tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h" |
| ;; |
| sh-wrs-vxworks) |
| tmake_file="$tmake_file sh/t-sh sh/t-vxworks" |
| tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h" |
| ;; |
| sparc-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h" |
| case ${target} in |
| *-leon-*) |
| tmake_file="sparc/t-sparc sparc/t-leon" |
| ;; |
| *-leon[3-9]*) |
| tmake_file="sparc/t-sparc sparc/t-leon3" |
| ;; |
| *) |
| tmake_file="sparc/t-sparc sparc/t-elf" |
| ;; |
| esac |
| ;; |
| sparc-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems" |
| ;; |
| sparc-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| case ${target} in |
| *-leon-*) |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon" |
| ;; |
| *-leon[3-9]*) |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3" |
| ;; |
| *) |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| esac |
| if test x$enable_targets = xall; then |
| tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h" |
| tmake_file="${tmake_file} sparc/t-linux64" |
| else |
| tm_file="${tm_file} sparc/linux.h" |
| tmake_file="${tmake_file} sparc/t-linux" |
| fi |
| ;; |
| sparc-*-netbsdelf*) |
| tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| sparc*-*-solaris2*) |
| tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sparc/tso.h" |
| case ${target} in |
| sparc64-*-* | sparcv9-*-*) |
| tm_file="sparc/default64.h ${tm_file}" |
| ;; |
| *) |
| test x$with_cpu != x || with_cpu=v9 |
| ;; |
| esac |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2" |
| ;; |
| sparc-wrs-vxworks) |
| tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks" |
| ;; |
| sparc64-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h" |
| extra_options="${extra_options}" |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| sparc64-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h" |
| extra_options="${extra_options}" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64" |
| ;; |
| sparc64-*-linux*) |
| tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default64.h sparc/linux64.h sparc/tso.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64" |
| ;; |
| sparc64-*-freebsd*|ultrasparc-*-freebsd*) |
| tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| case "x$with_cpu" in |
| xultrasparc) ;; |
| x) with_cpu=ultrasparc ;; |
| *) echo "$with_cpu not supported for freebsd target"; exit 1 ;; |
| esac |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| sparc64-*-netbsd*) |
| tm_file="sparc/biarch64.h ${tm_file}" |
| tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64" |
| ;; |
| sparc64-*-openbsd*) |
| tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h" |
| tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h" |
| extra_options="${extra_options} openbsd.opt" |
| extra_options="${extra_options}" |
| gas=yes gnu_ld=yes |
| with_cpu=ultrasparc |
| tmake_file="${tmake_file} sparc/t-sparc" |
| ;; |
| spu-*-elf*) |
| tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h" |
| tmake_file="spu/t-spu-elf" |
| native_system_header_dir=/include |
| extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h" |
| extra_modes=spu/spu-modes.def |
| c_target_objs="${c_target_objs} spu-c.o" |
| cxx_target_objs="${cxx_target_objs} spu-c.o" |
| ;; |
| tic6x-*-elf) |
| tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h" |
| tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h" |
| tmake_file="c6x/t-c6x c6x/t-c6x-elf" |
| use_collect2=no |
| ;; |
| tic6x-*-uclinux) |
| tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h" |
| tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h" |
| tm_file="${tm_file} ./sysroot-suffix.h" |
| tmake_file="t-sysroot-suffix t-slibgcc" |
| tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux" |
| use_collect2=no |
| ;; |
| tilegx*-*-linux*) |
| tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilegx/linux.h ${tm_file}" |
| tmake_file="${tmake_file} tilegx/t-tilegx" |
| extra_objs="${extra_objs} mul-tables.o" |
| c_target_objs="${c_target_objs} tilegx-c.o" |
| cxx_target_objs="${cxx_target_objs} tilegx-c.o" |
| extra_headers="feedback.h" |
| case $target in |
| tilegxbe-*) |
| tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" |
| ;; |
| esac |
| ;; |
| tilepro*-*-linux*) |
| tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilepro/linux.h ${tm_file}" |
| tmake_file="${tmake_file} tilepro/t-tilepro" |
| extra_objs="${extra_objs} mul-tables.o" |
| c_target_objs="${c_target_objs} tilepro-c.o" |
| cxx_target_objs="${cxx_target_objs} tilepro-c.o" |
| extra_headers="feedback.h" |
| ;; |
| v850-*-rtems*) |
| target_cpu_default="TARGET_CPU_generic" |
| tm_file="dbxelf.h elfos.h v850/v850.h" |
| tm_file="${tm_file} rtems.h v850/rtems.h newlib-stdint.h" |
| tmake_file="${tmake_file} v850/t-v850" |
| tmake_file="${tmake_file} v850/t-rtems" |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| ;; |
| v850*-*-*) |
| case ${target} in |
| v850e3v5-*-*) |
| target_cpu_default="TARGET_CPU_v850e3v5" |
| ;; |
| v850e2v3-*-*) |
| target_cpu_default="TARGET_CPU_v850e2v3" |
| ;; |
| v850e2-*-*) |
| target_cpu_default="TARGET_CPU_v850e2" |
| ;; |
| v850e1-*-* | v850es-*-*) |
| target_cpu_default="TARGET_CPU_v850e1" |
| ;; |
| v850e-*-*) |
| target_cpu_default="TARGET_CPU_v850e" |
| ;; |
| v850-*-*) |
| target_cpu_default="TARGET_CPU_generic" |
| ;; |
| esac |
| tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| use_gcc_stdint=wrap |
| ;; |
| vax-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h" |
| extra_options="${extra_options} vax/elf.opt" |
| ;; |
| vax-*-netbsdelf*) |
| tm_file="${tm_file} elfos.h ${nbsd_tm_file} vax/elf.h vax/netbsd-elf.h" |
| extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt" |
| tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1" |
| ;; |
| vax-*-openbsd*) |
| tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-libpthread.h vax/openbsd.h" |
| extra_options="${extra_options} openbsd.opt" |
| use_collect2=yes |
| ;; |
| visium-*-elf*) |
| tm_file="dbxelf.h elfos.h ${tm_file} visium/elf.h newlib-stdint.h" |
| tmake_file="visium/t-visium visium/t-crtstuff" |
| ;; |
| xstormy16-*-elf) |
| # For historical reasons, the target files omit the 'x'. |
| tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h" |
| tm_p_file=stormy16/stormy16-protos.h |
| tm_d_file="elfos.h stormy16/stormy16.h" |
| md_file=stormy16/stormy16.md |
| out_file=stormy16/stormy16.c |
| extra_options=stormy16/stormy16.opt |
| tmake_file="stormy16/t-stormy16" |
| ;; |
| xtensa*-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h" |
| extra_options="${extra_options} xtensa/elf.opt" |
| ;; |
| xtensa*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h" |
| tmake_file="${tmake_file} xtensa/t-xtensa" |
| ;; |
| xtensa*-*-uclinux*) |
| tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/uclinux.h" |
| tmake_file="${tmake_file} xtensa/t-xtensa" |
| extra_options="${extra_options} xtensa/uclinux.opt" |
| ;; |
| am33_2.0-*-linux*) |
| tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h" |
| gas=yes gnu_ld=yes |
| use_collect2=no |
| ;; |
| m32c-*-rtems*) |
| tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h" |
| c_target_objs="m32c-pragma.o" |
| cxx_target_objs="m32c-pragma.o" |
| ;; |
| m32c-*-elf*) |
| tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" |
| c_target_objs="m32c-pragma.o" |
| cxx_target_objs="m32c-pragma.o" |
| ;; |
| *) |
| echo "*** Configuration ${target} not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${target} in |
| i[34567]86-*-linux* | x86_64-*-linux*) |
| tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386" |
| ;; |
| i[34567]86-*-* | x86_64-*-*) |
| tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386" |
| ;; |
| powerpc*-*-* | rs6000-*-*) |
| tm_file="${tm_file} ${cpu_type}/option-defaults.h" |
| esac |
| |
| # non-glibc systems |
| case ${target} in |
| *-linux-musl*) |
| tmake_file="${tmake_file} t-musl" |
| ;; |
| *-linux-uclibc*) |
| tmake_file="${tmake_file} t-uclibc" |
| ;; |
| esac |
| |
| # Assume the existence of indirect function support and allow the use of the |
| # resolver attribute. |
| case ${target} in |
| *-*-linux*android*|*-*-linux*uclibc*|*-*-linux*musl*) |
| ;; |
| *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu) |
| ;; |
| *-*-linux* | *-*-gnu*) |
| case ${target} in |
| aarch64*-* | arm*-* | i[34567]86-* | powerpc*-* | s390*-* | sparc*-* | x86_64-*) |
| default_gnu_indirect_function=yes |
| ;; |
| esac |
| ;; |
| esac |
| |
| # Build mkoffload tool |
| case ${target} in |
| *-intelmic-* | *-intelmicemul-*) |
| tmake_file="${tmake_file} i386/t-intelmic" |
| tm_file="${tm_file} i386/intelmic-offload.h" |
| ;; |
| esac |
| |
| if [ "$target_has_targetcm" = "no" ]; then |
| c_target_objs="$c_target_objs default-c.o" |
| cxx_target_objs="$cxx_target_objs default-c.o" |
| fi |
| |
| if [ "$common_out_file" = "" ]; then |
| if [ "$target_has_targetm_common" = "yes" ]; then |
| common_out_file="$cpu_type/$cpu_type-common.c" |
| else |
| common_out_file="default-common.c" |
| fi |
| fi |
| |
| if [ "$target_has_targetdm" = "no" ]; then |
| d_target_objs="$d_target_objs default-d.o" |
| fi |
| |
| # Support for --with-cpu and related options (and a few unrelated options, |
| # too). |
| case ${with_cpu} in |
| yes | no) |
| echo "--with-cpu must be passed a value" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu |
| # to generic if there is no processor scheduler model for the target. |
| arch= |
| cpu= |
| arch_without_sse2=no |
| arch_without_64bit=no |
| case ${target} in |
| i386-*-freebsd*) |
| if test $fbsd_major -ge 6; then |
| arch=i486 |
| else |
| arch=i386 |
| fi |
| cpu=generic |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| ;; |
| i386-*-netbsd*) |
| arch=i486 |
| cpu=generic |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| ;; |
| i386-*-*) |
| arch=i386 |
| cpu=i386 |
| arch_without_sse2=yes |
| arch_without_64bit=yes |
| ;; |
| i486-*-*) |
|
