| /* Copy propagation on hard registers for the GNU compiler. |
| Copyright (C) 2000-2019 Free Software Foundation, Inc. |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it |
| under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3, or (at your option) |
| any later version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #include "config.h" |
| #include "system.h" |
| #include "coretypes.h" |
| #include "backend.h" |
| #include "rtl.h" |
| #include "df.h" |
| #include "memmodel.h" |
| #include "tm_p.h" |
| #include "insn-config.h" |
| #include "regs.h" |
| #include "emit-rtl.h" |
| #include "recog.h" |
| #include "diagnostic-core.h" |
| #include "addresses.h" |
| #include "tree-pass.h" |
| #include "rtl-iter.h" |
| #include "cfgrtl.h" |
| #include "target.h" |
| |
| /* The following code does forward propagation of hard register copies. |
| The object is to eliminate as many dependencies as possible, so that |
| we have the most scheduling freedom. As a side effect, we also clean |
| up some silly register allocation decisions made by reload. This |
| code may be obsoleted by a new register allocator. */ |
| |
| /* DEBUG_INSNs aren't changed right away, as doing so might extend the |
| lifetime of a register and get the DEBUG_INSN subsequently reset. |
| So they are queued instead, and updated only when the register is |
| used in some subsequent real insn before it is set. */ |
| struct queued_debug_insn_change |
| { |
| struct queued_debug_insn_change *next; |
| rtx_insn *insn; |
| rtx *loc; |
| rtx new_rtx; |
| }; |
| |
| /* For each register, we have a list of registers that contain the same |
| value. The OLDEST_REGNO field points to the head of the list, and |
| the NEXT_REGNO field runs through the list. The MODE field indicates |
| what mode the data is known to be in; this field is VOIDmode when the |
| register is not known to contain valid data. */ |
| |
| struct value_data_entry |
| { |
| machine_mode mode; |
| unsigned int oldest_regno; |
| unsigned int next_regno; |
| struct queued_debug_insn_change *debug_insn_changes; |
| }; |
| |
| struct value_data |
| { |
| struct value_data_entry e[FIRST_PSEUDO_REGISTER]; |
| unsigned int max_value_regs; |
| unsigned int n_debug_insn_changes; |
| }; |
| |
| static object_allocator<queued_debug_insn_change> queued_debug_insn_change_pool |
| ("debug insn changes pool"); |
| |
| static bool skip_debug_insn_p; |
| |
| static void kill_value_one_regno (unsigned, struct value_data *); |
| static void kill_value_regno (unsigned, unsigned, struct value_data *); |
| static void kill_value (const_rtx, struct value_data *); |
| static void set_value_regno (unsigned, machine_mode, struct value_data *); |
| static void init_value_data (struct value_data *); |
| static void kill_clobbered_value (rtx, const_rtx, void *); |
| static void kill_set_value (rtx, const_rtx, void *); |
| static void copy_value (rtx, rtx, struct value_data *); |
| static bool mode_change_ok (machine_mode, machine_mode, |
| unsigned int); |
| static rtx maybe_mode_change (machine_mode, machine_mode, |
| machine_mode, unsigned int, unsigned int); |
| static rtx find_oldest_value_reg (enum reg_class, rtx, struct value_data *); |
| static bool replace_oldest_value_reg (rtx *, enum reg_class, rtx_insn *, |
| struct value_data *); |
| static bool replace_oldest_value_addr (rtx *, enum reg_class, |
| machine_mode, addr_space_t, |
| rtx_insn *, struct value_data *); |
| static bool replace_oldest_value_mem (rtx, rtx_insn *, struct value_data *); |
| static bool copyprop_hardreg_forward_1 (basic_block, struct value_data *); |
| extern void debug_value_data (struct value_data *); |
| static void validate_value_data (struct value_data *); |
| |
| /* Free all queued updates for DEBUG_INSNs that change some reg to |
| register REGNO. */ |
| |
| static void |
| free_debug_insn_changes (struct value_data *vd, unsigned int regno) |
| { |
| struct queued_debug_insn_change *cur, *next; |
| for (cur = vd->e[regno].debug_insn_changes; cur; cur = next) |
| { |
| next = cur->next; |
| --vd->n_debug_insn_changes; |
| queued_debug_insn_change_pool.remove (cur); |
| } |
| vd->e[regno].debug_insn_changes = NULL; |
| } |
| |
| /* Kill register REGNO. This involves removing it from any value |
| lists, and resetting the value mode to VOIDmode. This is only a |
| helper function; it does not handle any hard registers overlapping |
| with REGNO. */ |
| |
| static void |
| kill_value_one_regno (unsigned int regno, struct value_data *vd) |
| { |
| unsigned int i, next; |
| |
| if (vd->e[regno].oldest_regno != regno) |
| { |
| for (i = vd->e[regno].oldest_regno; |
| vd->e[i].next_regno != regno; |
| i = vd->e[i].next_regno) |
| continue; |
| vd->e[i].next_regno = vd->e[regno].next_regno; |
| } |
| else if ((next = vd->e[regno].next_regno) != INVALID_REGNUM) |
| { |
| for (i = next; i != INVALID_REGNUM; i = vd->e[i].next_regno) |
| vd->e[i].oldest_regno = next; |
| } |
| |
| vd->e[regno].mode = VOIDmode; |
| vd->e[regno].oldest_regno = regno; |
| vd->e[regno].next_regno = INVALID_REGNUM; |
| if (vd->e[regno].debug_insn_changes) |
| free_debug_insn_changes (vd, regno); |
| |
| if (flag_checking) |
| validate_value_data (vd); |
| } |
| |
| /* Kill the value in register REGNO for NREGS, and any other registers |
| whose values overlap. */ |
| |
| static void |
| kill_value_regno (unsigned int regno, unsigned int nregs, |
| struct value_data *vd) |
| { |
| unsigned int j; |
| |
| /* Kill the value we're told to kill. */ |
| for (j = 0; j < nregs; ++j) |
| kill_value_one_regno (regno + j, vd); |
| |
| /* Kill everything that overlapped what we're told to kill. */ |
| if (regno < vd->max_value_regs) |
| j = 0; |
| else |
| j = regno - vd->max_value_regs; |
| for (; j < regno; ++j) |
| { |
| unsigned int i, n; |
| if (vd->e[j].mode == VOIDmode) |
| continue; |
| n = hard_regno_nregs (j, vd->e[j].mode); |
| if (j + n > regno) |
| for (i = 0; i < n; ++i) |
| kill_value_one_regno (j + i, vd); |
| } |
| } |
| |
| /* Kill X. This is a convenience function wrapping kill_value_regno |
| so that we mind the mode the register is in. */ |
| |
| static void |
| kill_value (const_rtx x, struct value_data *vd) |
| { |
| if (GET_CODE (x) == SUBREG) |
| { |
| rtx tmp = simplify_subreg (GET_MODE (x), SUBREG_REG (x), |
| GET_MODE (SUBREG_REG (x)), SUBREG_BYTE (x)); |
| x = tmp ? tmp : SUBREG_REG (x); |
| } |
| if (REG_P (x)) |
| kill_value_regno (REGNO (x), REG_NREGS (x), vd); |
| } |
| |
| /* Remember that REGNO is valid in MODE. */ |
| |
| static void |
| set_value_regno (unsigned int regno, machine_mode mode, |
| struct value_data *vd) |
| { |
| unsigned int nregs; |
| |
| vd->e[regno].mode = mode; |
| |
| nregs = hard_regno_nregs (regno, mode); |
| if (nregs > vd->max_value_regs) |
| vd->max_value_regs = nregs; |
| } |
| |
| /* Initialize VD such that there are no known relationships between regs. */ |
| |
| static void |
| init_value_data (struct value_data *vd) |
| { |
| int i; |
| for (i = 0; i < FIRST_PSEUDO_REGISTER; ++i) |
| { |
| vd->e[i].mode = VOIDmode; |
| vd->e[i].oldest_regno = i; |
| vd->e[i].next_regno = INVALID_REGNUM; |
| vd->e[i].debug_insn_changes = NULL; |
| } |
| vd->max_value_regs = 0; |
| vd->n_debug_insn_changes = 0; |
| } |
| |
| /* Called through note_stores. If X is clobbered, kill its value. */ |
| |
| static void |
| kill_clobbered_value (rtx x, const_rtx set, void *data) |
| { |
| struct value_data *const vd = (struct value_data *) data; |
| gcc_assert (GET_CODE (set) != CLOBBER_HIGH || REG_P (x)); |
| |
| if (GET_CODE (set) == CLOBBER |
| || (GET_CODE (set) == CLOBBER_HIGH |
| && reg_is_clobbered_by_clobber_high (x, XEXP (set, 0)))) |
| kill_value (x, vd); |
| } |
| |
| /* A structure passed as data to kill_set_value through note_stores. */ |
| struct kill_set_value_data |
| { |
| struct value_data *vd; |
| rtx ignore_set_reg; |
| }; |
| |
| /* Called through note_stores. If X is set, not clobbered, kill its |
| current value and install it as the root of its own value list. */ |
| |
| static void |
| kill_set_value (rtx x, const_rtx set, void *data) |
| { |
| struct kill_set_value_data *ksvd = (struct kill_set_value_data *) data; |
| if (rtx_equal_p (x, ksvd->ignore_set_reg)) |
| return; |
| |
| gcc_assert (GET_CODE (set) != CLOBBER_HIGH || REG_P (x)); |
| if (GET_CODE (set) != CLOBBER && GET_CODE (set) != CLOBBER_HIGH) |
| { |
| kill_value (x, ksvd->vd); |
| if (REG_P (x)) |
| set_value_regno (REGNO (x), GET_MODE (x), ksvd->vd); |
| } |
| } |
| |
| /* Kill any register used in X as the base of an auto-increment expression, |
| and install that register as the root of its own value list. */ |
| |
| static void |
| kill_autoinc_value (rtx_insn *insn, struct value_data *vd) |
| { |
| subrtx_iterator::array_type array; |
| FOR_EACH_SUBRTX (iter, array, PATTERN (insn), NONCONST) |
| { |
| const_rtx x = *iter; |
| if (GET_RTX_CLASS (GET_CODE (x)) == RTX_AUTOINC) |
| { |
| x = XEXP (x, 0); |
| kill_value (x, vd); |
| set_value_regno (REGNO (x), GET_MODE (x), vd); |
| iter.skip_subrtxes (); |
| } |
| } |
| } |
| |
| /* Assert that SRC has been copied to DEST. Adjust the data structures |
| to reflect that SRC contains an older copy of the shared value. */ |
| |
| static void |
| copy_value (rtx dest, rtx src, struct value_data *vd) |
| { |
| unsigned int dr = REGNO (dest); |
| unsigned int sr = REGNO (src); |
| unsigned int dn, sn; |
| unsigned int i; |
| |
| /* ??? At present, it's possible to see noop sets. It'd be nice if |
| this were cleaned up beforehand... */ |
| if (sr == dr) |
| return; |
| |
| /* Do not propagate copies to the stack pointer, as that can leave |
| memory accesses with no scheduling dependency on the stack update. */ |
| if (dr == STACK_POINTER_REGNUM) |
| return; |
| |
| /* Likewise with the frame pointer, if we're using one. */ |
| if (frame_pointer_needed && dr == HARD_FRAME_POINTER_REGNUM) |
| return; |
| |
| /* Do not propagate copies to fixed or global registers, patterns |
| can be relying to see particular fixed register or users can |
| expect the chosen global register in asm. */ |
| if (fixed_regs[dr] || global_regs[dr]) |
| return; |
| |
| /* If SRC and DEST overlap, don't record anything. */ |
| dn = REG_NREGS (dest); |
| sn = REG_NREGS (src); |
| if ((dr > sr && dr < sr + sn) |
| || (sr > dr && sr < dr + dn)) |
| return; |
| |
| /* If SRC had no assigned mode (i.e. we didn't know it was live) |
| assign it now and assume the value came from an input argument |
| or somesuch. */ |
| if (vd->e[sr].mode == VOIDmode) |
| set_value_regno (sr, vd->e[dr].mode, vd); |
| |
| /* If we are narrowing the input to a smaller number of hard regs, |
| and it is in big endian, we are really extracting a high part. |
| Since we generally associate a low part of a value with the value itself, |
| we must not do the same for the high part. |
| Note we can still get low parts for the same mode combination through |
| a two-step copy involving differently sized hard regs. |
| Assume hard regs fr* are 32 bits each, while r* are 64 bits each: |
| (set (reg:DI r0) (reg:DI fr0)) |
| (set (reg:SI fr2) (reg:SI r0)) |
| loads the low part of (reg:DI fr0) - i.e. fr1 - into fr2, while: |
| (set (reg:SI fr2) (reg:SI fr0)) |
| loads the high part of (reg:DI fr0) into fr2. |
| |
| We can't properly represent the latter case in our tables, so don't |
| record anything then. */ |
| else if (sn < hard_regno_nregs (sr, vd->e[sr].mode) |
| && maybe_ne (subreg_lowpart_offset (GET_MODE (dest), |
| vd->e[sr].mode), 0U)) |
| return; |
| |
| /* If SRC had been assigned a mode narrower than the copy, we can't |
| link DEST into the chain, because not all of the pieces of the |
| copy came from oldest_regno. */ |
| else if (sn > hard_regno_nregs (sr, vd->e[sr].mode)) |
| return; |
| |
| /* Link DR at the end of the value chain used by SR. */ |
| |
| vd->e[dr].oldest_regno = vd->e[sr].oldest_regno; |
| |
| for (i = sr; vd->e[i].next_regno != INVALID_REGNUM; i = vd->e[i].next_regno) |
| continue; |
| vd->e[i].next_regno = dr; |
| |
| if (flag_checking) |
| validate_value_data (vd); |
| } |
| |
| /* Return true if a mode change from ORIG to NEW is allowed for REGNO. */ |
| |
| static bool |
| mode_change_ok (machine_mode orig_mode, machine_mode new_mode, |
| unsigned int regno ATTRIBUTE_UNUSED) |
| { |
| if (partial_subreg_p (orig_mode, new_mode)) |
| return false; |
| |
| return REG_CAN_CHANGE_MODE_P (regno, orig_mode, new_mode); |
| } |
| |
| /* Register REGNO was originally set in ORIG_MODE. It - or a copy of it - |
| was copied in COPY_MODE to COPY_REGNO, and then COPY_REGNO was accessed |
| in NEW_MODE. |
| Return a NEW_MODE rtx for REGNO if that's OK, otherwise return NULL_RTX. */ |
| |
| static rtx |
| maybe_mode_change (machine_mode orig_mode, machine_mode copy_mode, |
| machine_mode new_mode, unsigned int regno, |
| unsigned int copy_regno ATTRIBUTE_UNUSED) |
| { |
| if (partial_subreg_p (copy_mode, orig_mode) |
| && partial_subreg_p (copy_mode, new_mode)) |
| return NULL_RTX; |
| |
| /* Avoid creating multiple copies of the stack pointer. Some ports |
| assume there is one and only one stack pointer. |
| |
| It's unclear if we need to do the same for other special registers. */ |
| if (regno == STACK_POINTER_REGNUM) |
| return NULL_RTX; |
| |
| if (orig_mode == new_mode) |
| return gen_raw_REG (new_mode, regno); |
| else if (mode_change_ok (orig_mode, new_mode, regno)) |
| { |
| int copy_nregs = hard_regno_nregs (copy_regno, copy_mode); |
| int use_nregs = hard_regno_nregs (copy_regno, new_mode); |
| poly_uint64 bytes_per_reg; |
| if (!can_div_trunc_p (GET_MODE_SIZE (copy_mode), |
| copy_nregs, &bytes_per_reg)) |
| return NULL_RTX; |
| poly_uint64 copy_offset = bytes_per_reg * (copy_nregs - use_nregs); |
| poly_uint64 offset |
| = subreg_size_lowpart_offset (GET_MODE_SIZE (new_mode) + copy_offset, |
| GET_MODE_SIZE (orig_mode)); |
| regno += subreg_regno_offset (regno, orig_mode, offset, new_mode); |
| if (targetm.hard_regno_mode_ok (regno, new_mode)) |
| return gen_raw_REG (new_mode, regno); |
| } |
| return NULL_RTX; |
| } |
| |
| /* Find the oldest copy of the value contained in REGNO that is in |
| register class CL and has mode MODE. If found, return an rtx |
| of that oldest register, otherwise return NULL. */ |
| |
| static rtx |
| find_oldest_value_reg (enum reg_class cl, rtx reg, struct value_data *vd) |
| { |
| unsigned int regno = REGNO (reg); |
| machine_mode mode = GET_MODE (reg); |
| unsigned int i; |
| |
| gcc_assert (regno < FIRST_PSEUDO_REGISTER); |
| |
| /* If we are accessing REG in some mode other that what we set it in, |
| make sure that the replacement is valid. In particular, consider |
| (set (reg:DI r11) (...)) |
| (set (reg:SI r9) (reg:SI r11)) |
| (set (reg:SI r10) (...)) |
| (set (...) (reg:DI r9)) |
| Replacing r9 with r11 is invalid. */ |
| if (mode != vd->e[regno].mode |
| && REG_NREGS (reg) > hard_regno_nregs (regno, vd->e[regno].mode)) |
| return NULL_RTX; |
| |
| for (i = vd->e[regno].oldest_regno; i != regno; i = vd->e[i].next_regno) |
| { |
| machine_mode oldmode = vd->e[i].mode; |
| rtx new_rtx; |
| |
| if (!in_hard_reg_set_p (reg_class_contents[cl], mode, i)) |
| continue; |
| |
| new_rtx = maybe_mode_change (oldmode, vd->e[regno].mode, mode, i, regno); |
| if (new_rtx) |
| { |
| ORIGINAL_REGNO (new_rtx) = ORIGINAL_REGNO (reg); |
| REG_ATTRS (new_rtx) = REG_ATTRS (reg); |
| REG_POINTER (new_rtx) = REG_POINTER (reg); |
| return new_rtx; |
| } |
| } |
| |
| return NULL_RTX; |
| } |
| |
| /* If possible, replace the register at *LOC with the oldest register |
| in register class CL. Return true if successfully replaced. */ |
| |
| static bool |
| replace_oldest_value_reg (rtx *loc, enum reg_class cl, rtx_insn *insn, |
| struct value_data *vd) |
| { |
| rtx new_rtx = find_oldest_value_reg (cl, *loc, vd); |
| if (new_rtx && (!DEBUG_INSN_P (insn) || !skip_debug_insn_p)) |
| { |
| if (DEBUG_INSN_P (insn)) |
| { |
| struct queued_debug_insn_change *change; |
| |
| if (dump_file) |
| fprintf (dump_file, "debug_insn %u: queued replacing reg %u with %u\n", |
| INSN_UID (insn), REGNO (*loc), REGNO (new_rtx)); |
| |
| change = queued_debug_insn_change_pool.allocate (); |
| change->next = vd->e[REGNO (new_rtx)].debug_insn_changes; |
| change->insn = insn; |
| change->loc = loc; |
| change->new_rtx = new_rtx; |
| vd->e[REGNO (new_rtx)].debug_insn_changes = change; |
| ++vd->n_debug_insn_changes; |
| return true; |
| } |
| if (dump_file) |
| fprintf (dump_file, "insn %u: replaced reg %u with %u\n", |
| INSN_UID (insn), REGNO (*loc), REGNO (new_rtx)); |
| |
| validate_change (insn, loc, new_rtx, 1); |
| return true; |
| } |
| return false; |
| } |
| |
| /* Similar to replace_oldest_value_reg, but *LOC contains an address. |
| Adapted from find_reloads_address_1. CL is INDEX_REG_CLASS or |
| BASE_REG_CLASS depending on how the register is being considered. */ |
| |
| static bool |
| replace_oldest_value_addr (rtx *loc, enum reg_class cl, |
| machine_mode mode, addr_space_t as, |
| rtx_insn *insn, struct value_data *vd) |
| { |
| rtx x = *loc; |
| RTX_CODE code = GET_CODE (x); |
| const char *fmt; |
| int i, j; |
| bool changed = false; |
| |
| switch (code) |
| { |
| case PLUS: |
| if (DEBUG_INSN_P (insn)) |
| break; |
| |
| { |
| rtx orig_op0 = XEXP (x, 0); |
| rtx orig_op1 = XEXP (x, 1); |
| RTX_CODE code0 = GET_CODE (orig_op0); |
| RTX_CODE code1 = GET_CODE (orig_op1); |
| rtx op0 = orig_op0; |
| rtx op1 = orig_op1; |
| rtx *locI = NULL; |
| rtx *locB = NULL; |
| enum rtx_code index_code = SCRATCH; |
| |
| if (GET_CODE (op0) == SUBREG) |
| { |
| op0 = SUBREG_REG (op0); |
| code0 = GET_CODE (op0); |
| } |
| |
| if (GET_CODE (op1) == SUBREG) |
| { |
| op1 = SUBREG_REG (op1); |
| code1 = GET_CODE (op1); |
| } |
| |
| if (code0 == MULT || code0 == SIGN_EXTEND || code0 == TRUNCATE |
| || code0 == ZERO_EXTEND || code1 == MEM) |
| { |
| locI = &XEXP (x, 0); |
| locB = &XEXP (x, 1); |
| index_code = GET_CODE (*locI); |
| } |
| else if (code1 == MULT || code1 == SIGN_EXTEND || code1 == TRUNCATE |
| || code1 == ZERO_EXTEND || code0 == MEM) |
| { |
| locI = &XEXP (x, 1); |
| locB = &XEXP (x, 0); |
| index_code = GET_CODE (*locI); |
| } |
| else if (code0 == CONST_INT || code0 == CONST |
| || code0 == SYMBOL_REF || code0 == LABEL_REF) |
| { |
| locB = &XEXP (x, 1); |
| index_code = GET_CODE (XEXP (x, 0)); |
| } |
| else if (code1 == CONST_INT || code1 == CONST |
| || code1 == SYMBOL_REF || code1 == LABEL_REF) |
| { |
| locB = &XEXP (x, 0); |
| index_code = GET_CODE (XEXP (x, 1)); |
| } |
| else if (code0 == REG && code1 == REG) |
| { |
| int index_op; |
| unsigned regno0 = REGNO (op0), regno1 = REGNO (op1); |
| |
| if (REGNO_OK_FOR_INDEX_P (regno1) |
| && regno_ok_for_base_p (regno0, mode, as, PLUS, REG)) |
| index_op = 1; |
| else if (REGNO_OK_FOR_INDEX_P (regno0) |
| && regno_ok_for_base_p (regno1, mode, as, PLUS, REG)) |
| index_op = 0; |
| else if (regno_ok_for_base_p (regno0, mode, as, PLUS, REG) |
| || REGNO_OK_FOR_INDEX_P (regno1)) |
| index_op = 1; |
| else if (regno_ok_for_base_p (regno1, mode, as, PLUS, REG)) |
| index_op = 0; |
| else |
| index_op = 1; |
| |
| locI = &XEXP (x, index_op); |
| locB = &XEXP (x, !index_op); |
| index_code = GET_CODE (*locI); |
| } |
| else if (code0 == REG) |
| { |
| locI = &XEXP (x, 0); |
| locB = &XEXP (x, 1); |
| index_code = GET_CODE (*locI); |
| } |
| else if (code1 == REG) |
| { |
| locI = &XEXP (x, 1); |
| locB = &XEXP (x, 0); |
| index_code = GET_CODE (*locI); |
| } |
| |
| if (locI) |
| changed |= replace_oldest_value_addr (locI, INDEX_REG_CLASS, |
| mode, as, insn, vd); |
| if (locB) |
| changed |= replace_oldest_value_addr (locB, |
| base_reg_class (mode, as, PLUS, |
| index_code), |
| mode, as, insn, vd); |
| return changed; |
| } |
| |
| case POST_INC: |
| case POST_DEC: |
| case POST_MODIFY: |
| case PRE_INC: |
| case PRE_DEC: |
| case PRE_MODIFY: |
| return false; |
| |
| case MEM: |
| return replace_oldest_value_mem (x, insn, vd); |
| |
| case REG: |
| return replace_oldest_value_reg (loc, cl, insn, vd); |
| |
| default: |
| break; |
| } |
| |
| fmt = GET_RTX_FORMAT (code); |
| for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) |
| { |
| if (fmt[i] == 'e') |
| changed |= replace_oldest_value_addr (&XEXP (x, i), cl, mode, as, |
| insn, vd); |
| else if (fmt[i] == 'E') |
| for (j = XVECLEN (x, i) - 1; j >= 0; j--) |
| changed |= replace_oldest_value_addr (&XVECEXP (x, i, j), cl, |
| mode, as, insn, vd); |
| } |
| |
| return changed; |
| } |
| |
| /* Similar to replace_oldest_value_reg, but X contains a memory. */ |
| |
| static bool |
| replace_oldest_value_mem (rtx x, rtx_insn *insn, struct value_data *vd) |
| { |
| enum reg_class cl; |
| |
| if (DEBUG_INSN_P (insn)) |
| cl = ALL_REGS; |
| else |
| cl = base_reg_class (GET_MODE (x), MEM_ADDR_SPACE (x), MEM, SCRATCH); |
| |
| return replace_oldest_value_addr (&XEXP (x, 0), cl, |
| GET_MODE (x), MEM_ADDR_SPACE (x), |
| insn, vd); |
| } |
| |
| /* Apply all queued updates for DEBUG_INSNs that change some reg to |
| register REGNO. */ |
| |
| static void |
| apply_debug_insn_changes (struct value_data *vd, unsigned int regno) |
| { |
| struct queued_debug_insn_change *change; |
| rtx_insn *last_insn = vd->e[regno].debug_insn_changes->insn; |
| |
| for (change = vd->e[regno].debug_insn_changes; |
| change; |
| change = change->next) |
| { |
| if (last_insn != change->insn) |
| { |
| apply_change_group (); |
| last_insn = change->insn; |
| } |
| validate_change (change->insn, change->loc, change->new_rtx, 1); |
| } |
| apply_change_group (); |
| } |
| |
| /* Called via note_uses, for all used registers in a real insn |
| apply DEBUG_INSN changes that change registers to the used |
| registers. */ |
| |
| static void |
| cprop_find_used_regs (rtx *loc, void *data) |
| { |
| struct value_data *const vd = (struct value_data *) data; |
| subrtx_iterator::array_type array; |
| FOR_EACH_SUBRTX (iter, array, *loc, NONCONST) |
| { |
| const_rtx x = *iter; |
| if (REG_P (x)) |
| { |
| unsigned int regno = REGNO (x); |
| if (vd->e[regno].debug_insn_changes) |
| { |
| apply_debug_insn_changes (vd, regno); |
| free_debug_insn_changes (vd, regno); |
| } |
| } |
| } |
| } |
| |
| /* Apply clobbers of INSN in PATTERN and C_I_F_U to value_data VD. */ |
| |
| static void |
| kill_clobbered_values (rtx_insn *insn, struct value_data *vd) |
| { |
| note_stores (PATTERN (insn), kill_clobbered_value, vd); |
| |
| if (CALL_P (insn)) |
| { |
| rtx exp; |
| |
| for (exp = CALL_INSN_FUNCTION_USAGE (insn); exp; exp = XEXP (exp, 1)) |
| { |
| rtx x = XEXP (exp, 0); |
| if (GET_CODE (x) == CLOBBER) |
| kill_value (SET_DEST (x), vd); |
| } |
| } |
| } |
| |
| /* Perform the forward copy propagation on basic block BB. */ |
| |
| static bool |
| copyprop_hardreg_forward_1 (basic_block bb, struct value_data *vd) |
| { |
| bool anything_changed = false; |
| rtx_insn *insn, *next; |
| |
| for (insn = BB_HEAD (bb); ; insn = next) |
| { |
| int n_ops, i, predicated; |
| bool is_asm, any_replacements; |
| rtx set; |
| rtx link; |
| bool changed = false; |
| struct kill_set_value_data ksvd; |
| |
| next = NEXT_INSN (insn); |
| if (!NONDEBUG_INSN_P (insn)) |
| { |
| if (DEBUG_BIND_INSN_P (insn)) |
| { |
| rtx loc = INSN_VAR_LOCATION_LOC (insn); |
| if (!VAR_LOC_UNKNOWN_P (loc)) |
| replace_oldest_value_addr (&INSN_VAR_LOCATION_LOC (insn), |
| ALL_REGS, GET_MODE (loc), |
| ADDR_SPACE_GENERIC, insn, vd); |
| } |
| |
| if (insn == BB_END (bb)) |
| break; |
| else |
| continue; |
| } |
| |
| set = single_set (insn); |
| |
| /* Detect noop sets and remove them before processing side effects. */ |
| if (set && REG_P (SET_DEST (set)) && REG_P (SET_SRC (set))) |
| { |
| unsigned int regno = REGNO (SET_SRC (set)); |
| rtx r1 = find_oldest_value_reg (REGNO_REG_CLASS (regno), |
| SET_DEST (set), vd); |
| rtx r2 = find_oldest_value_reg (REGNO_REG_CLASS (regno), |
| SET_SRC (set), vd); |
| if (rtx_equal_p (r1 ? r1 : SET_DEST (set), r2 ? r2 : SET_SRC (set))) |
| { |
| bool last = insn == BB_END (bb); |
| delete_insn (insn); |
| if (last) |
| break; |
| continue; |
| } |
| } |
| |
| /* Detect obviously dead sets (via REG_UNUSED notes) and remove them. */ |
| if (set |
| && !RTX_FRAME_RELATED_P (insn) |
| && !may_trap_p (set) |
| && find_reg_note (insn, REG_UNUSED, SET_DEST (set)) |
| && !side_effects_p (SET_SRC (set)) |
| && !side_effects_p (SET_DEST (set))) |
| { |
| bool last = insn == BB_END (bb); |
| delete_insn (insn); |
| if (last) |
| break; |
| continue; |
| } |
| |
| |
| extract_constrain_insn (insn); |
| preprocess_constraints (insn); |
| const operand_alternative *op_alt = which_op_alt (); |
| n_ops = recog_data.n_operands; |
| is_asm = asm_noperands (PATTERN (insn)) >= 0; |
| |
| /* Simplify the code below by promoting OP_OUT to OP_INOUT |
| in predicated instructions. */ |
| |
| predicated = GET_CODE (PATTERN (insn)) == COND_EXEC; |
| for (i = 0; i < n_ops; ++i) |
| { |
| int matches = op_alt[i].matches; |
| if (matches >= 0 || op_alt[i].matched >= 0 |
| || (predicated && recog_data.operand_type[i] == OP_OUT)) |
| recog_data.operand_type[i] = OP_INOUT; |
| } |
| |
| /* Apply changes to earlier DEBUG_INSNs if possible. */ |
| if (vd->n_debug_insn_changes) |
| note_uses (&PATTERN (insn), cprop_find_used_regs, vd); |
| |
| /* For each earlyclobber operand, zap the value data. */ |
| for (i = 0; i < n_ops; i++) |
| if (op_alt[i].earlyclobber) |
| kill_value (recog_data.operand[i], vd); |
| |
| /* Within asms, a clobber cannot overlap inputs or outputs. |
| I wouldn't think this were true for regular insns, but |
| scan_rtx treats them like that... */ |
| kill_clobbered_values (insn, vd); |
| |
| /* Kill all auto-incremented values. */ |
| /* ??? REG_INC is useless, since stack pushes aren't done that way. */ |
| kill_autoinc_value (insn, vd); |
| |
| /* Kill all early-clobbered operands. */ |
| for (i = 0; i < n_ops; i++) |
| if (op_alt[i].earlyclobber) |
| kill_value (recog_data.operand[i], vd); |
| |
| /* If we have dead sets in the insn, then we need to note these as we |
| would clobbers. */ |
| for (link = REG_NOTES (insn); link; link = XEXP (link, 1)) |
| { |
| if (REG_NOTE_KIND (link) == REG_UNUSED) |
| { |
| kill_value (XEXP (link, 0), vd); |
| /* Furthermore, if the insn looked like a single-set, |
| but the dead store kills the source value of that |
| set, then we can no-longer use the plain move |
| special case below. */ |
| if (set |
| && reg_overlap_mentioned_p (XEXP (link, 0), SET_SRC (set))) |
| set = NULL; |
| } |
| |
| /* We need to keep CFI info correct, and the same on all paths, |
| so we cannot normally replace the registers REG_CFA_REGISTER |
| refers to. Bail. */ |
| if (REG_NOTE_KIND (link) == REG_CFA_REGISTER) |
| goto did_replacement; |
| } |
| |
| /* Special-case plain move instructions, since we may well |
| be able to do the move from a different register class. */ |
| if (set && REG_P (SET_SRC (set))) |
| { |
| rtx src = SET_SRC (set); |
| unsigned int regno = REGNO (src); |
| machine_mode mode = GET_MODE (src); |
| unsigned int i; |
| rtx new_rtx; |
| |
| /* If we are accessing SRC in some mode other that what we |
| set it in, make sure that the replacement is valid. */ |
| if (mode != vd->e[regno].mode) |
| { |
| if (REG_NREGS (src) |
| > hard_regno_nregs (regno, vd->e[regno].mode)) |
| goto no_move_special_case; |
| |
| /* And likewise, if we are narrowing on big endian the transformation |
| is also invalid. */ |
| if (REG_NREGS (src) < hard_regno_nregs (regno, vd->e[regno].mode) |
| && maybe_ne (subreg_lowpart_offset (mode, |
| vd->e[regno].mode), 0U)) |
| goto no_move_special_case; |
| } |
| |
| /* If the destination is also a register, try to find a source |
| register in the same class. */ |
| if (REG_P (SET_DEST (set))) |
| { |
| new_rtx = find_oldest_value_reg (REGNO_REG_CLASS (regno), |
| src, vd); |
| |
| if (new_rtx && validate_change (insn, &SET_SRC (set), new_rtx, 0)) |
| { |
| if (dump_file) |
| fprintf (dump_file, |
| "insn %u: replaced reg %u with %u\n", |
| INSN_UID (insn), regno, REGNO (new_rtx)); |
| changed = true; |
| goto did_replacement; |
| } |
| /* We need to re-extract as validate_change clobbers |
| recog_data. */ |
| extract_constrain_insn (insn); |
| preprocess_constraints (insn); |
| } |
| |
| /* Otherwise, try all valid registers and see if its valid. */ |
| for (i = vd->e[regno].oldest_regno; i != regno; |
| i = vd->e[i].next_regno) |
| { |
| new_rtx = maybe_mode_change (vd->e[i].mode, vd->e[regno].mode, |
| mode, i, regno); |
| if (new_rtx != NULL_RTX) |
| { |
| if (validate_change (insn, &SET_SRC (set), new_rtx, 0)) |
| { |
| ORIGINAL_REGNO (new_rtx) = ORIGINAL_REGNO (src); |
| REG_ATTRS (new_rtx) = REG_ATTRS (src); |
| REG_POINTER (new_rtx) = REG_POINTER (src); |
| if (dump_file) |
| fprintf (dump_file, |
| "insn %u: replaced reg %u with %u\n", |
| INSN_UID (insn), regno, REGNO (new_rtx)); |
| changed = true; |
| goto did_replacement; |
| } |
| /* We need to re-extract as validate_change clobbers |
| recog_data. */ |
| extract_constrain_insn (insn); |
| preprocess_constraints (insn); |
| } |
| } |
| } |
| no_move_special_case: |
| |
| any_replacements = false; |
| |
| /* For each input operand, replace a hard register with the |
| eldest live copy that's in an appropriate register class. */ |
| for (i = 0; i < n_ops; i++) |
| { |
| bool replaced = false; |
| |
| /* Don't scan match_operand here, since we've no reg class |
| information to pass down. Any operands that we could |
| substitute in will be represented elsewhere. */ |
| if (recog_data.constraints[i][0] == '\0') |
| continue; |
| |
| /* Don't replace in asms intentionally referencing hard regs. */ |
| if (is_asm && REG_P (recog_data.operand[i]) |
| && (REGNO (recog_data.operand[i]) |
| == ORIGINAL_REGNO (recog_data.operand[i]))) |
| continue; |
| |
| if (recog_data.operand_type[i] == OP_IN) |
| { |
| if (op_alt[i].is_address) |
| replaced |
| = replace_oldest_value_addr (recog_data.operand_loc[i], |
| alternative_class (op_alt, i), |
| VOIDmode, ADDR_SPACE_GENERIC, |
| insn, vd); |
| else if (REG_P (recog_data.operand[i])) |
| replaced |
| = replace_oldest_value_reg (recog_data.operand_loc[i], |
| alternative_class (op_alt, i), |
| insn, vd); |
| else if (MEM_P (recog_data.operand[i])) |
| replaced = replace_oldest_value_mem (recog_data.operand[i], |
| insn, vd); |
| } |
| else if (MEM_P (recog_data.operand[i])) |
| replaced = replace_oldest_value_mem (recog_data.operand[i], |
| insn, vd); |
| |
| /* If we performed any replacement, update match_dups. */ |
| if (replaced) |
| { |
| int j; |
| rtx new_rtx; |
| |
| new_rtx = *recog_data.operand_loc[i]; |
| recog_data.operand[i] = new_rtx; |
| for (j = 0; j < recog_data.n_dups; j++) |
| if (recog_data.dup_num[j] == i) |
| validate_unshare_change (insn, recog_data.dup_loc[j], new_rtx, 1); |
| |
| any_replacements = true; |
| } |
| } |
| |
| if (any_replacements) |
| { |
| if (! apply_change_group ()) |
| { |
| if (dump_file) |
| fprintf (dump_file, |
| "insn %u: reg replacements not verified\n", |
| INSN_UID (insn)); |
| } |
| else |
| changed = true; |
| } |
| |
| did_replacement: |
| if (changed) |
| { |
| anything_changed = true; |
| |
| /* If something changed, perhaps further changes to earlier |
| DEBUG_INSNs can be applied. */ |
| if (vd->n_debug_insn_changes) |
| note_uses (&PATTERN (insn), cprop_find_used_regs, vd); |
| df_insn_rescan (insn); |
| } |
| |
| ksvd.vd = vd; |
| ksvd.ignore_set_reg = NULL_RTX; |
| |
| /* Clobber call-clobbered registers. */ |
| if (CALL_P (insn)) |
| { |
| unsigned int set_regno = INVALID_REGNUM; |
| unsigned int set_nregs = 0; |
| unsigned int regno; |
| rtx exp; |
| HARD_REG_SET regs_invalidated_by_this_call; |
| |
| for (exp = CALL_INSN_FUNCTION_USAGE (insn); exp; exp = XEXP (exp, 1)) |
| { |
| rtx x = XEXP (exp, 0); |
| if (GET_CODE (x) == SET) |
| { |
| rtx dest = SET_DEST (x); |
| kill_value (dest, vd); |
| set_value_regno (REGNO (dest), GET_MODE (dest), vd); |
| copy_value (dest, SET_SRC (x), vd); |
| ksvd.ignore_set_reg = dest; |
| set_regno = REGNO (dest); |
| set_nregs = REG_NREGS (dest); |
| break; |
| } |
| } |
| |
| get_call_reg_set_usage (insn, |
| ®s_invalidated_by_this_call, |
| regs_invalidated_by_call); |
| for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) |
| if ((TEST_HARD_REG_BIT (regs_invalidated_by_this_call, regno) |
| || (targetm.hard_regno_call_part_clobbered |
| (insn, regno, vd->e[regno].mode))) |
| && (regno < set_regno || regno >= set_regno + set_nregs)) |
| kill_value_regno (regno, 1, vd); |
| |
| /* If SET was seen in CALL_INSN_FUNCTION_USAGE, and SET_SRC |
| of the SET isn't in regs_invalidated_by_call hard reg set, |
| but instead among CLOBBERs on the CALL_INSN, we could wrongly |
| assume the value in it is still live. */ |
| if (ksvd.ignore_set_reg) |
| kill_clobbered_values (insn, vd); |
| } |
| |
| bool copy_p = (set |
| && REG_P (SET_DEST (set)) |
| && REG_P (SET_SRC (set))); |
| bool noop_p = (copy_p |
| && rtx_equal_p (SET_DEST (set), SET_SRC (set))); |
| |
| /* If a noop move is using narrower mode than we have recorded, |
| we need to either remove the noop move, or kill_set_value. */ |
| if (noop_p |
| && partial_subreg_p (GET_MODE (SET_DEST (set)), |
| vd->e[REGNO (SET_DEST (set))].mode)) |
| { |
| if (noop_move_p (insn)) |
| { |
| bool last = insn == BB_END (bb); |
| delete_insn (insn); |
| if (last) |
| break; |
| } |
| else |
| noop_p = false; |
| } |
| |
| if (!noop_p) |
| { |
| /* Notice stores. */ |
| note_stores (PATTERN (insn), kill_set_value, &ksvd); |
| |
| /* Notice copies. */ |
| if (copy_p) |
| { |
| df_insn_rescan (insn); |
| copy_value (SET_DEST (set), SET_SRC (set), vd); |
| } |
| } |
| |
| if (insn == BB_END (bb)) |
| break; |
| } |
| |
| return anything_changed; |
| } |
| |
| /* Dump the value chain data to stderr. */ |
| |
| DEBUG_FUNCTION void |
| debug_value_data (struct value_data *vd) |
| { |
| HARD_REG_SET set; |
| unsigned int i, j; |
| |
| CLEAR_HARD_REG_SET (set); |
| |
| for (i = 0; i < FIRST_PSEUDO_REGISTER; ++i) |
| if (vd->e[i].oldest_regno == i) |
| { |
| if (vd->e[i].mode == VOIDmode) |
| { |
| if (vd->e[i].next_regno != INVALID_REGNUM) |
| fprintf (stderr, "[%u] Bad next_regno for empty chain (%u)\n", |
| i, vd->e[i].next_regno); |
| continue; |
| } |
| |
| SET_HARD_REG_BIT (set, i); |
| fprintf (stderr, "[%u %s] ", i, GET_MODE_NAME (vd->e[i].mode)); |
| |
| for (j = vd->e[i].next_regno; |
| j != INVALID_REGNUM; |
| j = vd->e[j].next_regno) |
| { |
| if (TEST_HARD_REG_BIT (set, j)) |
| { |
| fprintf (stderr, "[%u] Loop in regno chain\n", j); |
| return; |
| } |
| |
| if (vd->e[j].oldest_regno != i) |
| { |
| fprintf (stderr, "[%u] Bad oldest_regno (%u)\n", |
| j, vd->e[j].oldest_regno); |
| return; |
| } |
| SET_HARD_REG_BIT (set, j); |
| fprintf (stderr, "[%u %s] ", j, GET_MODE_NAME (vd->e[j].mode)); |
| } |
| fputc ('\n', stderr); |
| } |
| |
| for (i = 0; i < FIRST_PSEUDO_REGISTER; ++i) |
| if (! TEST_HARD_REG_BIT (set, i) |
| && (vd->e[i].mode != VOIDmode |
| || vd->e[i].oldest_regno != i |
| || vd->e[i].next_regno != INVALID_REGNUM)) |
| fprintf (stderr, "[%u] Non-empty reg in chain (%s %u %i)\n", |
| i, GET_MODE_NAME (vd->e[i].mode), vd->e[i].oldest_regno, |
| vd->e[i].next_regno); |
| } |
| |
| /* Do copyprop_hardreg_forward_1 for a single basic block BB. |
| DEBUG_INSN is skipped since we do not want to involve DF related |
| staff as how it is handled in function pass_cprop_hardreg::execute. |
| |
| NOTE: Currently it is only used for shrink-wrap. Maybe extend it |
| to handle DEBUG_INSN for other uses. */ |
| |
| void |
| copyprop_hardreg_forward_bb_without_debug_insn (basic_block bb) |
| { |
| struct value_data *vd; |
| vd = XNEWVEC (struct value_data, 1); |
| init_value_data (vd); |
| |
| skip_debug_insn_p = true; |
| copyprop_hardreg_forward_1 (bb, vd); |
| free (vd); |
| skip_debug_insn_p = false; |
| } |
| |
| static void |
| validate_value_data (struct value_data *vd) |
| { |
| HARD_REG_SET set; |
| unsigned int i, j; |
| |
| CLEAR_HARD_REG_SET (set); |
| |
| for (i = 0; i < FIRST_PSEUDO_REGISTER; ++i) |
| if (vd->e[i].oldest_regno == i) |
| { |
| if (vd->e[i].mode == VOIDmode) |
| { |
| if (vd->e[i].next_regno != INVALID_REGNUM) |
| internal_error ("validate_value_data: [%u] Bad next_regno for empty chain (%u)", |
| i, vd->e[i].next_regno); |
| continue; |
| } |
| |
| SET_HARD_REG_BIT (set, i); |
| |
| for (j = vd->e[i].next_regno; |
| j != INVALID_REGNUM; |
| j = vd->e[j].next_regno) |
| { |
| if (TEST_HARD_REG_BIT (set, j)) |
| internal_error ("validate_value_data: Loop in regno chain (%u)", |
| j); |
| if (vd->e[j].oldest_regno != i) |
| internal_error ("validate_value_data: [%u] Bad oldest_regno (%u)", |
| j, vd->e[j].oldest_regno); |
| |
| SET_HARD_REG_BIT (set, j); |
| } |
| } |
| |
| for (i = 0; i < FIRST_PSEUDO_REGISTER; ++i) |
| if (! TEST_HARD_REG_BIT (set, i) |
| && (vd->e[i].mode != VOIDmode |
| || vd->e[i].oldest_regno != i |
| || vd->e[i].next_regno != INVALID_REGNUM)) |
| internal_error ("validate_value_data: [%u] Non-empty reg in chain (%s %u %i)", |
| i, GET_MODE_NAME (vd->e[i].mode), vd->e[i].oldest_regno, |
| vd->e[i].next_regno); |
| } |
| |
| |
| namespace { |
| |
| const pass_data pass_data_cprop_hardreg = |
| { |
| RTL_PASS, /* type */ |
| "cprop_hardreg", /* name */ |
| OPTGROUP_NONE, /* optinfo_flags */ |
| TV_CPROP_REGISTERS, /* tv_id */ |
| 0, /* properties_required */ |
| 0, /* properties_provided */ |
| 0, /* properties_destroyed */ |
| 0, /* todo_flags_start */ |
| TODO_df_finish, /* todo_flags_finish */ |
| }; |
| |
| class pass_cprop_hardreg : public rtl_opt_pass |
| { |
| public: |
| pass_cprop_hardreg (gcc::context *ctxt) |
| : rtl_opt_pass (pass_data_cprop_hardreg, ctxt) |
| {} |
| |
| /* opt_pass methods: */ |
| virtual bool gate (function *) |
| { |
| return (optimize > 0 && (flag_cprop_registers)); |
| } |
| |
| virtual unsigned int execute (function *); |
| |
| }; // class pass_cprop_hardreg |
| |
| static bool |
| cprop_hardreg_bb (basic_block bb, struct value_data *all_vd, sbitmap visited) |
| { |
| bitmap_set_bit (visited, bb->index); |
| |
| /* If a block has a single predecessor, that we've already |
| processed, begin with the value data that was live at |
| the end of the predecessor block. */ |
| /* ??? Ought to use more intelligent queuing of blocks. */ |
| if (single_pred_p (bb) |
| && bitmap_bit_p (visited, single_pred (bb)->index) |
| && ! (single_pred_edge (bb)->flags & (EDGE_ABNORMAL_CALL | EDGE_EH))) |
| { |
| all_vd[bb->index] = all_vd[single_pred (bb)->index]; |
| if (all_vd[bb->index].n_debug_insn_changes) |
| { |
| unsigned int regno; |
| |
| for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) |
| { |
| if (all_vd[bb->index].e[regno].debug_insn_changes) |
| { |
| struct queued_debug_insn_change *cur; |
| for (cur = all_vd[bb->index].e[regno].debug_insn_changes; |
| cur; cur = cur->next) |
| --all_vd[bb->index].n_debug_insn_changes; |
| all_vd[bb->index].e[regno].debug_insn_changes = NULL; |
| if (all_vd[bb->index].n_debug_insn_changes == 0) |
| break; |
| } |
| } |
| } |
| } |
| else |
| init_value_data (all_vd + bb->index); |
| |
| return copyprop_hardreg_forward_1 (bb, all_vd + bb->index); |
| } |
| |
| static void |
| cprop_hardreg_debug (function *fun, struct value_data *all_vd) |
| { |
| basic_block bb; |
| |
| FOR_EACH_BB_FN (bb, fun) |
| if (all_vd[bb->index].n_debug_insn_changes) |
| { |
| unsigned int regno; |
| bitmap live; |
| |
| live = df_get_live_out (bb); |
| for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) |
| if (all_vd[bb->index].e[regno].debug_insn_changes) |
| { |
| if (REGNO_REG_SET_P (live, regno)) |
| apply_debug_insn_changes (all_vd + bb->index, regno); |
| |
| struct queued_debug_insn_change *cur; |
| for (cur = all_vd[bb->index].e[regno].debug_insn_changes; |
| cur; cur = cur->next) |
| --all_vd[bb->index].n_debug_insn_changes; |
| all_vd[bb->index].e[regno].debug_insn_changes = NULL; |
| if (all_vd[bb->index].n_debug_insn_changes == 0) |
| break; |
| } |
| } |
| |
| queued_debug_insn_change_pool.release (); |
| } |
| |
| unsigned int |
| pass_cprop_hardreg::execute (function *fun) |
| { |
| struct value_data *all_vd; |
| basic_block bb; |
| |
| all_vd = XNEWVEC (struct value_data, last_basic_block_for_fn (fun)); |
| |
| auto_sbitmap visited (last_basic_block_for_fn (fun)); |
| bitmap_clear (visited); |
| |
| auto_vec<int> worklist; |
| bool any_debug_changes = false; |
| |
| /* We need accurate notes. Earlier passes such as if-conversion may |
| leave notes in an inconsistent state. */ |
| df_note_add_problem (); |
| df_analyze (); |
| |
| /* It is tempting to set DF_LR_RUN_DCE, but DCE may choose to delete |
| an insn and this pass would not have visibility into the removal. |
| This pass would then potentially use the source of that |
| INSN for propagation purposes, generating invalid code. |
| |
| So we just ask for updated notes and handle trivial deletions |
| within this pass where we can update this passes internal |
| data structures appropriately. */ |
| df_set_flags (DF_DEFER_INSN_RESCAN); |
| |
| FOR_EACH_BB_FN (bb, fun) |
| { |
| if (cprop_hardreg_bb (bb, all_vd, visited)) |
| worklist.safe_push (bb->index); |
| if (all_vd[bb->index].n_debug_insn_changes) |
| any_debug_changes = true; |
| } |
| |
| /* We must call df_analyze here unconditionally to ensure that the |
| REG_UNUSED and REG_DEAD notes are consistent with and without -g. */ |
| df_analyze (); |
| |
| if (MAY_HAVE_DEBUG_BIND_INSNS && any_debug_changes) |
| cprop_hardreg_debug (fun, all_vd); |
| |
| /* Second pass if we've changed anything, only for the bbs where we have |
| changed anything though. */ |
| if (!worklist.is_empty ()) |
| { |
| unsigned int i; |
| int index; |
| |
| any_debug_changes = false; |
| bitmap_clear (visited); |
| FOR_EACH_VEC_ELT (worklist, i, index) |
| { |
| bb = BASIC_BLOCK_FOR_FN (fun, index); |
| cprop_hardreg_bb (bb, all_vd, visited); |
| if (all_vd[bb->index].n_debug_insn_changes) |
| any_debug_changes = true; |
| } |
| |
| df_analyze (); |
| if (MAY_HAVE_DEBUG_BIND_INSNS && any_debug_changes) |
| cprop_hardreg_debug (fun, all_vd); |
| } |
| |
| free (all_vd); |
| return 0; |
| } |
| |
| } // anon namespace |
| |
| rtl_opt_pass * |
| make_pass_cprop_hardreg (gcc::context *ctxt) |
| { |
| return new pass_cprop_hardreg (ctxt); |
| } |