Google Git
Sign in
gnu / gcc / refs/tags/basepoints/gcc-13 / . / gcc / ChangeLog-2020
blob: 6553720acad21d4388bb22afbda9a8d488307e3d [file] [log] [blame]
2020-12-31 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/98302
* tree-vect-patterns.c (vect_determine_precisions_from_users): Make
sure that the precision remains greater than the shift count.
2020-12-31 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/94994
* tree-vect-data-refs.c (vect_vfa_align): Use dr_alignment.
2020-12-31 Richard Sandiford <richard.sandiford@arm.com>
PR rtl-optimization/98214
* genmodes.c (emit_insn_modes_h): Emit a definition of CONST_MODE_MASK.
(emit_mode_mask): Treat mode_mask_array as non-constant if adj_nunits.
(emit_mode_adjustments): Update GET_MODE_MASK when updating
GET_MODE_NUNITS.
* machmode.h (mode_mask_array): Use CONST_MODE_MASK.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94802
* match.pd (clz(X) == 0 -> (int)X < 0): New simplification.
(clz(X) == (prec-1) -> X == 1): Likewise.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94785
* match.pd ((-(X < 0) | 1) * X -> abs (X)): New simplification.
((-(X < 0) | 1U) * X -> absu (X)): Likewise.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98474
* wide-int.cc (wi::to_mpz): If wide_int has MSB set, but type
is unsigned and excess negative, append set bits after len until
precision.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR c++/98206
* fold-const.c: Include asan.h.
(fold_unary_loc): Don't optimize (ptr_type) (((ptr_type2) x) p+ y)
into ((ptr_type) x) p+ y if sanitizing alignment in GENERIC and
ptr_type points to type with higher alignment than ptr_type2.
2020-12-31 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/56719
* tree-ssa-reassoc.c (optimize_range_tests_cmp_bitwise): Also optimize
x < C && y < C && z < C when C is a power of two constant into
(x | y | z) < C.
2020-12-30 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386.md: Remove unnecessary clobbers
from combine splitters.
2020-12-30 Jakub Jelinek <jakub@redhat.com>
PR target/98461
* config/i386/sse.md (<sse2_avx2>_pmovmskb): Add splitters
for pmovmskb of NOT vector.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.md (maddsidi4_split): Skip macd gen, use mac insn
instead.
(macd): Update register letters.
(umaddsidi4_split): Skip macdu gen, use macu insn instead.
(macdu): Update register letters.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_secondary_reload): Flip if-condition
predicates.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.h (REGNO_OK_FOR_BASE_P): Check if defined
reg_renumber.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (prepare_move_operands): Use a temporary
registers when we have cached mem-to-uncached mem moves.
2020-12-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.md (movdi_insn): Update pattern, no predicated
vadd2 usage.
(movdf_insn): Likewise.
* config/arc/simdext.md (movVEC_insn): Likewise.
2020-12-29 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-expand.c (ix86_gen_TWO52): Use REAL_MODE_FORMAT
to determine number of mantissa bits. Use real_2expN instead
of real_ldexp.
(ix86_expand_rint): Use copy_to_reg.
(ix86_expand_floorceildf_32): Ditto.
(ix86_expand_truncdf_32): Ditto.
(ix86_expand_rounddf_32): Ditto.
(ix86_expand_floorceil): Use copy_to_reg and int_mode_for_mode.
(ix86_expand_trunc): Ditto.
(ix86_expand_round): Ditto.
2020-12-28 Gerald Pfeifer <gerald@pfeifer.com>
* doc/standards.texi (HSAIL): Remove section.
2020-12-28 Uroš Bizjak <ubizjak@gmail.com>
PR target/96793
* config/i386/i386-expand.c (ix86_expand_rint):
Remove the sign of the intermediate value for flag_rounding_math.
2020-12-28 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-expand.c (ix86_expand_trunc): Use
existing temporary register to avoid a call to force_reg.
2020-12-28 Hongyu Wang <hongyu.wang@intel.com>
* config/i386/i386.md (optab): New code attr.
* config/i386/sse.md (<code>v32qiv32hi2): Rename to ...
(<optab>v32qiv32hi2) ... this.
(<code>v16qiv16hi2): Likewise.
(<code>v8qiv8hi2): Likewise.
(<code>v16qiv16si2): Likewise.
(<code>v8qiv8si2): Likewise.
(<code>v4qiv4si2): Likewise.
(<code>v16hiv16si2): Likewise.
(<code>v8hiv8si2): Likewise.
(<code>v4hiv4si2): Likewise.
(<code>v8qiv8di2): Likewise.
(<code>v4qiv4di2): Likewise.
(<code>v2qiv2di2): Likewise.
(<code>v8hiv8di2): Likewise.
(<code>v4hiv4di2): Likewise.
(<code>v2hiv2di2): Likewise.
(<code>v8siv8di2): Likewise.
(<code>v4siv4di2): Likewise.
(<code>v2siv2di2): Likewise.
2020-12-27 Gerald Pfeifer <gerald@pfeifer.com>
* doc/analyzer.texi (Analyzer Internals): Find a new source for
the "A Memory Model for Static Analysis of C Programs" paper.
2020-12-25 Gerald Pfeifer <gerald@pfeifer.com>
* doc/invoke.texi (C++ Module Mapper): Fix reference to libcody.
2020-12-24 Iain Sandoe <iain@sandoe.co.uk>
* configure.ac: Add gxx-libcxx-include-dir handled
in the same way as the regular cxx header directory.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
* cppdefault.c: Pick up libc++ headers if the option
is enabled.
* cppdefault.h (struct default_include): Amend comments
to reflect the extended use of the cplusplus field.
* incpath.c (add_standard_paths): Allow for multiple
c++ header include path variants.
* doc/invoke.texi: Document the -stdlib= option.
2020-12-24 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/multilib-generator (arch_canonicalize): Call
decode for the subprocess return value.
2020-12-23 Martin Sebor <msebor@redhat.com>
PR middle-end/98160
* builtins.c (warn_dealloc_offset): Avoid assuming calls are made
through declared functions and not pointers.
2020-12-23 Martin Sebor <msebor@redhat.com>
PR c++/98413
* builtins.c (get_offset_range): Avoid non-integers/-pointers.
2020-12-23 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-driver.c (validate_macosx_version_min): Allow
MACOSX_DEPLOYMENT_TARGET=11.
(darwin_default_min_version): Adjust warning spelling to avoid
an apostrophe.
2020-12-23 Uroš Bizjak <ubizjak@gmail.com>
PR target/96793
* config/i386/i386-expand.c (ix86_expand_truncdf_32):
Remove the sign of the intermediate value for flag_rounding_math.
2020-12-22 Qian Jianhua <qianjh@cn.fujitsu.com>
* config/arm/types.md (define_attr "autodetect_type"): New.
(define_attr "type"): Subdivide alu_shift_imm.
* config/arm/common.md: New file.
* config/aarch64/predicates.md:Include common.md.
* config/arm/predicates.md:Include common.md.
* config/aarch64/aarch64.md (*add_<shift>_<mode>): Set autodetect_type.
(*add_<shift>_si_uxtw): Likewise.
(*sub_<shift>_<mode>): Likewise.
(*sub_<shift>_si_uxtw): Likewise.
(*neg_<shift>_<mode>2): Likewise.
(*neg_<shift>_si2_uxtw): Likewise.
* config/arm/arm.md (*addsi3_carryin_shift): Likewise.
(add_not_shift_cin): Likewise.
(*subsi3_carryin_shift): Likewise.
(*subsi3_carryin_shift_alt): Likewise.
(*rsbsi3_carryin_shift): Likewise.
(*rsbsi3_carryin_shift_alt): Likewise.
(*arm_shiftsi3): Likewise.
(*<arith_shift_insn>_multsi): Likewise.
(*<arith_shift_insn>_shiftsi): Likewise.
(subsi3_carryin): Set new type.
(*if_arith_move): Set new type.
(*if_move_arith): Set new type.
(define_attr "core_cycles"): Use new type.
* config/arm/arm-fixed.md (arm_ssatsihi_shift): Set autodetect_type.
* config/arm/thumb2.md (*orsi_not_shiftsi_si): Likewise.
(*thumb2_shiftsi3_short): Set new type.
* config/aarch64/falkor.md (falkor_alu_1_xyz): Use new type.
* config/aarch64/saphira.md (saphira_alu_1_xyz): Likewise.
* config/aarch64/thunderx.md (thunderx_arith_shift): Likewise.
* config/aarch64/thunderx2t99.md (thunderx2t99_alu_shift): Likewise.
* config/aarch64/thunderx3t110.md (thunderx3t110_alu_shift): Likewise.
(thunderx3t110_alu_shift1): Likewise.
* config/aarch64/tsv110.md (tsv110_alu_shift): Likewise.
* config/arm/arm1020e.md (1020alu_shift_op): Likewise.
* config/arm/arm1026ejs.md (alu_shift_op): Likewise.
* config/arm/arm1136jfs.md (11_alu_shift_op): Likewise.
* config/arm/arm926ejs.md (9_alu_op): Likewise.
* config/arm/cortex-a15.md (cortex_a15_alu_shift): Likewise.
* config/arm/cortex-a17.md (cortex_a17_alu_shiftimm): Likewise.
* config/arm/cortex-a5.md (cortex_a5_alu_shift): Likewise.
* config/arm/cortex-a53.md (cortex_a53_alu_shift): Likewise.
* config/arm/cortex-a57.md (cortex_a57_alu_shift): Likewise.
* config/arm/cortex-a7.md (cortex_a7_alu_shift): Likewise.
* config/arm/cortex-a8.md (cortex_a8_alu_shift): Likewise.
* config/arm/cortex-a9.md (cortex_a9_dp_shift): Likewise.
* config/arm/cortex-m4.md (cortex_m4_alu): Likewise.
* config/arm/cortex-m7.md (cortex_m7_alu_shift): Likewise.
* config/arm/cortex-r4.md (cortex_r4_alu_shift): Likewise.
* config/arm/exynos-m1.md (exynos_m1_alu_shift): Likewise.
* config/arm/fa526.md (526_alu_shift_op): Likewise.
* config/arm/fa606te.md (606te_alu_op): Likewise.
* config/arm/fa626te.md (626te_alu_shift_op): Likewise.
* config/arm/fa726te.md (726te_alu_shift_op): Likewise.
* config/arm/fmp626.md (mp626_alu_shift_op): Likewise.
* config/arm/marvell-pj4.md (pj4_shift): Likewise.
(pj4_shift_conds): Likewise.
(pj4_alu_shift): Likewise.
(pj4_alu_shift_conds): Likewise.
* config/arm/xgene1.md (xgene1_alu): Likewise.
* config/arm/arm.c (xscale_sched_adjust_cost): Likewise.
2020-12-22 Uroš Bizjak <ubizjak@gmail.com>
PR target/96793
* config/i386/i386-expand.c (ix86_expand_floorceil):
Remove the sign of the intermediate value for flag_rounding_math.
(ix86_expand_floorceildf_32): Ditto.
2020-12-22 liuhongt <hongtao.liu@intel.com>
* config/i386/i386.md (*one_cmpl<mode>2_1): Fix typo, change
alternative from 2 to 1 in attr isa.
2020-12-22 Ian Lance Taylor <iant@golang.org>
* godump.c (go_output_typedef): If DECL_ORIGINAL_TYPE is NULL, use
TREE_TYPE.
2020-12-21 Jakub Jelinek <jakub@redhat.com>
PR c++/98353
* gimplify.c (gimplify_init_ctor_eval_range): Gimplify value before
storing it into cref.
2020-12-21 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-driver.c (darwin_find_version_from_kernel):
Compute the minor OS version from the minor kernel version.
2020-12-21 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98407
* fold-const.c (native_encode_initializer): When handling flexible
array members, fix up computation of length for memset. Also remove
" - o" as o is always guaranteed to be 0 in this code path.
2020-12-21 Jakub Jelinek <jakub@redhat.com>
PR c++/98383
* gimplify.c (struct gimplify_omp_ctx): Add in_for_exprs flag.
(gimple_add_tmp_var): For addressable temporaries appearing in
simd lb, b or incr expressions, don't add a private clause unless
it is seen also outside of those expressions in the simd body.
(omp_notice_variable): Likewise.
(gimplify_omp_for): Set and reset in_for_exprs around gimplification
of lb, b or incr expressions.
2020-12-20 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/xtensa.md (bswapsi2, bswapdi2): New patterns.
2020-12-20 Jakub Jelinek <jakub@redhat.com>
PR other/98400
* doc/invoke.texi (-mbackchain): Fix a typo - -mmo-backchain ->
-mno-backchain.
2020-12-19 Jakub Jelinek <jakub@redhat.com>
PR middle-end/98366
* fold-const.c (native_encode_initializer): Don't try to
memset more than total_bytes with off == -1 even if len is large.
Handle flexible array member initializers if off == -1 and mask is
NULL.
* expr.c (convert_to_bytes): Remove.
(constant_byte_string): Use native_encode_initializer instead of
convert_to_bytes. Remove extraneous semicolon. Punt on various
corner-cases the APIs don't handle, like sizes > INT_MAX,
BITS_PER_UNIT != 8, CHAR_BIT != 8.
2020-12-19 Iain Buclaw <ibuclaw@gdcproject.org>
PR d/98067
* dwarf2out.c (dwarf2out_imported_module_or_decl_1): Handle
CONST_DECL only if is_fortran, is_ada, or is_dlang.
2020-12-19 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98378
* gimple-ssa-store-merging.c (find_bswap_or_nop): Punt if CONSTRUCTOR
has no elements.
2020-12-18 Jakub Jelinek <jakub@redhat.com>
* gimplify.c (struct gimplify_omp_ctx): Add has_depend member.
(gimplify_scan_omp_clauses): Set it to true if OMP_CLAUSE_DEPEND
appears on OMP_TASK.
(gimplify_adjust_omp_clauses_1, gimplify_adjust_omp_clauses): Force
GOVD_WRITTEN on shared variables if task construct has depend clause.
2020-12-18 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
PR target/98177
* tree-vect-loop.c (vect_create_epilog_for_reduction): Use
get_same_sized_vectype to obtain index type.
(vectorizable_reduction): Likewise.
2020-12-18 Kwok Cheung Yeung <kcy@codesourcery.com>
* langhooks-def.h (lhd_get_decl_init): New.
(lhd_finish_decl_inits): New.
(LANG_HOOKS_GET_DECL_INIT): New.
(LANG_HOOKS_OMP_FINISH_DECL_INITS): New.
(LANG_HOOKS_DECLS): Add LANG_HOOKS_GET_DECL_INIT and
LANG_HOOKS_OMP_FINISH_DECL_INITS.
* langhooks.c (lhd_omp_get_decl_init): New.
(lhd_omp_finish_decl_inits): New.
* langhooks.h (struct lang_hooks_for_decls): Add omp_get_decl_init
and omp_finish_decl_inits.
* omp-offload.c (omp_discover_declare_target_var_r): Use
get_decl_init langhook in place of DECL_INITIAL. Call
omp_finish_decl_inits langhook at end of function.
2020-12-18 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64.c (aarch64_preferred_simd_mode): Use
aarch64_full_sve_mode and aarch64_vq_mode directly, instead of
going via aarch64_simd_container_mode.
2020-12-18 Tamar Christina <tamar.christina@arm.com>
* config/arm/iterators.md (rot): Add UNSPEC_VCMUL, UNSPEC_VCMUL90,
UNSPEC_VCMUL180, UNSPEC_VCMUL270.
2020-12-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/arm/arm-cpus.in: Add Cortex-A78C core.
* config/arm/arm-tables.opt: Regenerate.
* config/arm/arm-tune.md: Regenerate.
* doc/invoke.texi: Update docs.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
PR rtl-optimization/98347
* rtl-ssa/access-utils.h (full_register): Use regno_reg_rtx
instead of reg_raw_mode.
2020-12-17 H.J. Lu <hjl.tools@gmail.com>
* targhooks.h (default_estimated_poly_value): Updated.
2020-12-17 Nathan Sidwell <nathan@acm.org>
* doc/invoke.texi (C++ Modules): Document lack of std
library header units.
2020-12-17 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* target.h (enum poly_value_estimate_kind): Define.
(estimated_poly_value): Take an estimate kind argument.
* target.def (estimated_poly_value): Update definition for the
above.
* doc/tm.texi: Regenerate.
* targhooks.c (estimated_poly_value): Update prototype.
* tree-vect-loop.c (vect_better_loop_vinfo_p): Use min, max and
likely estimates of VF to pick between vinfos.
* config/aarch64/aarch64.c (aarch64_cmp_autovec_modes): Use
estimated_poly_value instead of aarch64_estimated_poly_value.
(aarch64_estimated_poly_value): Take a kind argument and handle
it.
2020-12-17 Andrea Corallo <andrea.corallo@arm.com>
* config/arm/arm_neon.h (vcreate_p64): Remove call to
'__builtin_neon_vcreatedi'.
2020-12-17 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97750
* range-op.cc (operator_cast::op1_range): Handle pointers better.
2020-12-17 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* rtl-ssa.h: Include memmodel.h before tm_p.h.
2020-12-17 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/98289
* shrink-wrap.c (can_get_prologue): Don't punt on EDGE_CROSSING
incoming edges.
2020-12-17 Marius Hillenbrand <mhillen@linux.ibm.com>
* configure.ac: Change --enable-s390-excess-float-precision
default behavior for cross compiles with target headers.
* configure: Regenerate.
* doc/install.texi: Adjust documentation.
2020-12-17 Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>
* config/xtensa/xtensa.md (*ashlsi3_1, *ashlsi3_3x, *ashrsi3_3x)
(*lshrsi3_3x): New patterns.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* fwprop.c: Rewrite to use the RTL SSA framework.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* configure.ac: Add rtl-ssa to the list of dependence directories.
* configure: Regenerate.
* Makefile.in (rtl-ssa-warn): New variable.
(OBJS): Add the rtl-ssa object files.
* emit-rtl.h (rtl_data::ssa): New field.
* rtl-ssa.h: New file.
* system.h: Include <functional> when INCLUDE_FUNCTIONAL is defined.
* rtl-ssa/access-utils.h: Likewise.
* rtl-ssa/accesses.h: New file.
* rtl-ssa/accesses.cc: Likewise.
* rtl-ssa/blocks.h: New file.
* rtl-ssa/blocks.cc: Likewise.
* rtl-ssa/change-utils.h: Likewise.
* rtl-ssa/changes.h: New file.
* rtl-ssa/changes.cc: Likewise.
* rtl-ssa/functions.h: New file.
* rtl-ssa/functions.cc: Likewise.
* rtl-ssa/insn-utils.h: Likewise.
* rtl-ssa/insns.h: New file.
* rtl-ssa/insns.cc: Likewise.
* rtl-ssa/internals.inl: Likewise.
* rtl-ssa/is-a.inl: Likewise.
* rtl-ssa/member-fns.inl: Likewise.
* rtl-ssa/movement.h: Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* doc/rtl.texi (RTL SSA): New node.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* rtl.h (simple_regno_set): Declare.
* rtlanal.c (simple_regno_set): New function.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* rtlanal.h: New file.
(MEM_REGNO): New constant.
(rtx_obj_flags): New namespace.
(rtx_obj_reference, rtx_properties): New classes.
(growing_rtx_properties, vec_rtx_properties_base): Likewise.
(vec_rtx_properties): New alias.
* rtlanal.c: Include it.
(rtx_properties::try_to_add_reg): New function.
(rtx_properties::try_to_add_dest): Likewise.
(rtx_properties::try_to_add_src): Likewise.
(rtx_properties::try_to_add_pattern): Likewise.
(rtx_properties::try_to_add_insn): Likewise.
(vec_rtx_properties_base::grow): Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* recog.h (insn_change_watermark): New class.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* recog.h (insn_propagation): New class.
* recog.c (insn_propagation::apply_to_mem_1): New function.
(insn_propagation::apply_to_rvalue_1): Likewise.
(insn_propagation::apply_to_lvalue_1): Likewise.
(insn_propagation::apply_to_pattern_1): Likewise.
(insn_propagation::apply_to_pattern): Likewise.
(insn_propagation::apply_to_rvalue): Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* recog.h (temporarily_undo_changes, redo_changes): Declare.
* recog.c (temporarily_undone_changes): New variable.
(validate_change_1, confirm_change_group): Check that it's zero.
(cancel_changes): Likewise.
(swap_change, temporarily_undo_changes): New functions.
(redo_changes): Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* recog.h (validate_change_xveclen): Declare.
* recog.c (change_t::old_len): New field.
(validate_change_1): Add a new_len parameter. Conditionally
replace the XVECLEN of an rtx, avoiding single-element PARALLELs.
(validate_change_xveclen): New function.
(cancel_changes): Undo changes made by validate_change_xveclen.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* rtl.h (simplify_context): New class.
(simplify_unary_operation, simplify_binary_operation): Use it.
(simplify_ternary_operation, simplify_relational_operation): Likewise.
(simplify_subreg, simplify_gen_unary, simplify_gen_binary): Likewise.
(simplify_gen_ternary, simplify_gen_relational): Likewise.
(simplify_gen_subreg, lowpart_subreg): Likewise.
* simplify-rtx.c (simplify_gen_binary): Turn into a member function
of simplify_context.
(simplify_gen_unary, simplify_gen_ternary, simplify_gen_relational)
(simplify_truncation, simplify_unary_operation): Likewise.
(simplify_unary_operation_1, simplify_byte_swapping_operation)
(simplify_associative_operation, simplify_logical_relational_operation)
(simplify_binary_operation, simplify_binary_operation_series)
(simplify_distributive_operation, simplify_plus_minus): Likewise.
(simplify_relational_operation, simplify_relational_operation_1)
(simplify_cond_clz_ctz, simplify_merge_mask): Likewise.
(simplify_ternary_operation, simplify_subreg, simplify_gen_subreg)
(lowpart_subreg): Likewise.
(simplify_binary_operation_1): Likewise. Test mem_depth when
deciding whether the ASHIFT or MULT form is canonical.
(simplify_merge_mask): Use simplify_context.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* rtl.h (register_asm_p): Declare.
* recog.c (verify_changes): Split out the test for whether
a hard register is a register asm to...
* rtlanal.c (register_asm_p): ...this new function.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* print-rtl.h (print_insn_with_notes): Declare.
* print-rtl.c (print_insn_with_notes): Make non-static
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* cfgrtl.h (update_cfg_for_uncondjump): Declare.
* combine.c (update_cfg_for_uncondjump): Move to...
* cfgrtl.c: ...here.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* vec.h (array_slice): New class.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* Makefile.in (OBJS): Add splay-tree-utils.o.
* system.h: Include <array> when INCLUDE_ARRAY is defined.
* selftest.h (splay_tree_cc_tests): Declare.
* selftest-run-tests.c (selftest::run_tests): Run splay_tree_cc_tests.
* splay-tree-utils.h: New file.
* splay-tree-utils.tcc: Likewise.
* splay-tree-utils.cc: Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* mux-utils.h: New file.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* obstack-utils.h: New file.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* iterator-utils.h (derived_iterator): New class.
(const_derived_container, wrapper_iterator): Likewise.
(list_iterator): Likewise.
2020-12-17 Richard Sandiford <richard.sandiford@arm.com>
* hard-reg-set.h (global_reg_set): Declare.
* reginfo.c (global_reg_set): New variable.
(init_reg_sets_1, globalize_reg): Update it when globalizing
registers.
2020-12-16 Piotr Kubaj <pkubaj@FreeBSD.org>
* config.gcc (powerpc*le-*-freebsd*): Add.
* configure.ac (powerpc*le-*-freebsd*): Ditto.
* configure: Regenerate.
* config/rs6000/freebsd64.h (ASM_SPEC_COMMON): Use ENDIAN_SELECT.
(DEFAULT_ASM_ENDIAN): Add little endian support.
(LINK_OS_FREEBSD_SPEC64): Ditto.
2020-12-16 Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>
* config/xtensa/xtensa.c (xtensa_emit_move_sequence): Try to
replace 'l32r' with 'movi' + 'slli' when optimizing for size.
* config/xtensa/xtensa.md (movdi): Split loading DI mode constant
into register pair into two loads of SI mode constants.
2020-12-16 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm_mve.h (__arm_vcmulq_rot90_f16):
(__arm_vcmulq_rot270_f16, _arm_vcmulq_rot180_f16, __arm_vcmulq_f16,
__arm_vcmulq_rot90_f32, __arm_vcmulq_rot270_f32,
__arm_vcmulq_rot180_f32, __arm_vcmulq_f32, __arm_vcmlaq_f16,
__arm_vcmlaq_rot180_f16, __arm_vcmlaq_rot270_f16,
__arm_vcmlaq_rot90_f16, __arm_vcmlaq_f32, __arm_vcmlaq_rot180_f32,
__arm_vcmlaq_rot270_f32, __arm_vcmlaq_rot90_f32): Update builtin calls.
* config/arm/arm_mve_builtins.def (vcmulq_f, vcmulq_rot90_f,
vcmulq_rot180_f, vcmulq_rot270_f, vcmlaq_f, vcmlaq_rot90_f,
vcmlaq_rot180_f, vcmlaq_rot270_f): Removed.
(vcmulq, vcmulq_rot90, vcmulq_rot180, vcmulq_rot270, vcmlaq,
vcmlaq_rot90, vcmlaq_rot180, vcmlaq_rot270): New.
* config/arm/iterators.md (mve_rot): Add UNSPEC_VCMLA, UNSPEC_VCMLA90,
UNSPEC_VCMLA180, UNSPEC_VCMLA270, UNSPEC_VCMUL, UNSPEC_VCMUL90,
UNSPEC_VCMUL180, UNSPEC_VCMUL270.
(VCMUL): New.
* config/arm/mve.md (mve_vcmulq_f<mode, mve_vcmulq_rot180_f<mode>,
mve_vcmulq_rot270_f<mode>, mve_vcmulq_rot90_f<mode>, mve_vcmlaq_f<mode>,
mve_vcmlaq_rot180_f<mode>, mve_vcmlaq_rot270_f<mode>,
mve_vcmlaq_rot90_f<mode>): Removed.
(mve_vcmlaq<mve_rot><mode>, mve_vcmulq<mve_rot><mode>,
mve_vcaddq<mve_rot><mode>, cadd<rot><mode>3, mve_vcaddq<mve_rot><mode>):
New.
* config/arm/unspecs.md (UNSPEC_VCMUL90, UNSPEC_VCMUL270, UNSPEC_VCMUL,
UNSPEC_VCMUL180): New.
(VCMULQ_F, VCMULQ_ROT180_F, VCMULQ_ROT270_F, VCMULQ_ROT90_F,
VCMLAQ_F, VCMLAQ_ROT180_F, VCMLAQ_ROT90_F, VCMLAQ_ROT270_F): Removed.
2020-12-16 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm_mve.h (__arm_vcaddq_rot90_u8, __arm_vcaddq_rot270_u8,
__arm_vcaddq_rot90_s8, __arm_vcaddq_rot270_s8,
__arm_vcaddq_rot90_u16, __arm_vcaddq_rot270_u16,
__arm_vcaddq_rot90_s16, __arm_vcaddq_rot270_s16,
__arm_vcaddq_rot90_u32, __arm_vcaddq_rot270_u32,
__arm_vcaddq_rot90_s32, __arm_vcaddq_rot270_s32,
__arm_vcaddq_rot90_f16, __arm_vcaddq_rot270_f16,
__arm_vcaddq_rot90_f32, __arm_vcaddq_rot270_f32): Update builtin calls.
* config/arm/arm_mve_builtins.def (vcaddq_rot90_u, vcaddq_rot270_u,
vcaddq_rot90_s, vcaddq_rot270_s, vcaddq_rot90_f, vcaddq_rot270_f):
Removed.
(vcaddq_rot90, vcaddq_rot270): New.
* config/arm/constraints.md (Dz): Include MVE.
* config/arm/iterators.md (mve_rot): New.
(supf): Remove VCADDQ_ROT270_S, VCADDQ_ROT270_U, VCADDQ_ROT90_S,
VCADDQ_ROT90_U.
(VCADDQ_ROT270, VCADDQ_ROT90): Removed.
* config/arm/mve.md (mve_vcaddq_rot270_<supf><mode,
mve_vcaddq_rot90_<supf><mode>, mve_vcaddq_rot270_f<mode>,
mve_vcaddq_rot90_f<mode>): Removed.
(mve_vcaddq<mve_rot><mode>, mve_vcaddq<mve_rot><mode>): New.
* config/arm/unspecs.md (VCADDQ_ROT270_S, VCADDQ_ROT90_S,
VCADDQ_ROT270_U, VCADDQ_ROT90_U, VCADDQ_ROT270_F,
VCADDQ_ROT90_F): Removed.
* config/arm/vec-common.md (cadd<rot><mode>3): New.
2020-12-16 Tamar Christina <tamar.christina@arm.com>
* config/aarch64/aarch64-simd.md (cadd<rot><mode>3): New.
* config/aarch64/iterators.md (SVE2_INT_CADD_OP): New.
* config/aarch64/aarch64-sve.md (cadd<rot><mode>3): New.
* config/aarch64/aarch64-sve2.md (cadd<rot><mode>3): New.
2020-12-16 Pat Haugen <pthaugen@linux.ibm.com>
* config/rs6000/mma.md (*movxo, mma_<vvi4i4i8>, mma_<avvi4i4i8>,
mma_<vvi4i4i2>, mma_<avvi4i4i2>, mma_<vvi4i4>, mma_<avvi4i4>,
mma_<pvi4i2>, mma_<apvi4i2>, mma_<vvi4i4i4>, mma_<avvi4i4i4>):
Remove explicit setting of length attribute.
2020-12-16 Jakub Jelinek <jakub@redhat.com>
* varasm.c (default_elf_asm_named_section): Always force
section flags even for sections with SECTION_LINK_ORDER flag.
2020-12-16 H.J. Lu <hjl.tools@gmail.com>
PR target/98146
* defaults.h (SUPPORTS_SHF_GNU_RETAIN): New.
* varasm.c (get_section): Replace HAVE_GAS_SHF_GNU_RETAIN with
SUPPORTS_SHF_GNU_RETAIN.
(resolve_unique_section): Likewise.
(get_variable_section): Likewise.
(switch_to_section): Likewise.
2020-12-16 H.J. Lu <hjl.tools@gmail.com>
PR target/98146
* varasm.c (switch_to_section): Warn when a symbol without used
attribute and a symbol with used attribute are placed in the
section with the same name.
2020-12-16 H.J. Lu <hjl.tools@gmail.com>
PR target/98146
* output.h (switch_to_section): Add a tree argument, default to
nullptr.
* varasm.c (get_section): If the SECTION_RETAIN bit doesn't match,
return and switch to a new section later.
(assemble_start_function): Pass decl to switch_to_section.
(assemble_variable): Likewise.
(switch_to_section): If the SECTION_RETAIN bit doesn't match,
switch to a new section.
2020-12-16 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96239
* gimple-ssa-store-merging.c (find_bswap_or_nop): Handle a vector
CONSTRUCTOR.
(bswap_replace): Likewise.
2020-12-16 Martin Liska <mliska@suse.cz>
* common.opt: Remove usage of Report.
* config/aarch64/aarch64.opt: Ditto.
* config/alpha/alpha.opt: Ditto.
* config/arc/arc.opt: Ditto.
* config/arm/arm.opt: Ditto.
* config/avr/avr.opt: Ditto.
* config/bfin/bfin.opt: Ditto.
* config/bpf/bpf.opt: Ditto.
* config/c6x/c6x.opt: Ditto.
* config/cr16/cr16.opt: Ditto.
* config/cris/cris.opt: Ditto.
* config/cris/elf.opt: Ditto.
* config/csky/csky.opt: Ditto.
* config/darwin.opt: Ditto.
* config/fr30/fr30.opt: Ditto.
* config/frv/frv.opt: Ditto.
* config/ft32/ft32.opt: Ditto.
* config/gcn/gcn.opt: Ditto.
* config/i386/cygming.opt: Ditto.
* config/i386/i386.opt: Ditto.
* config/ia64/ia64.opt: Ditto.
* config/ia64/ilp32.opt: Ditto.
* config/linux-android.opt: Ditto.
* config/linux.opt: Ditto.
* config/lm32/lm32.opt: Ditto.
* config/m32r/m32r.opt: Ditto.
* config/m68k/m68k.opt: Ditto.
* config/mcore/mcore.opt: Ditto.
* config/microblaze/microblaze.opt: Ditto.
* config/mips/mips.opt: Ditto.
* config/mmix/mmix.opt: Ditto.
* config/mn10300/mn10300.opt: Ditto.
* config/moxie/moxie.opt: Ditto.
* config/msp430/msp430.opt: Ditto.
* config/nds32/nds32.opt: Ditto.
* config/nios2/elf.opt: Ditto.
* config/nios2/nios2.opt: Ditto.
* config/nvptx/nvptx.opt: Ditto.
* config/pa/pa.opt: Ditto.
* config/pdp11/pdp11.opt: Ditto.
* config/pru/pru.opt: Ditto.
* config/riscv/riscv.opt: Ditto.
* config/rl78/rl78.opt: Ditto.
* config/rs6000/aix64.opt: Ditto.
* config/rs6000/linux64.opt: Ditto.
* config/rs6000/rs6000.opt: Ditto.
* config/rs6000/sysv4.opt: Ditto.
* config/rx/elf.opt: Ditto.
* config/rx/rx.opt: Ditto.
* config/s390/s390.opt: Ditto.
* config/s390/tpf.opt: Ditto.
* config/sh/sh.opt: Ditto.
* config/sol2.opt: Ditto.
* config/sparc/long-double-switch.opt: Ditto.
* config/sparc/sparc.opt: Ditto.
* config/tilegx/tilegx.opt: Ditto.
* config/tilepro/tilepro.opt: Ditto.
* config/v850/v850.opt: Ditto.
* config/visium/visium.opt: Ditto.
* config/vms/vms.opt: Ditto.
* config/vxworks.opt: Ditto.
* config/xtensa/xtensa.opt: Ditto.
2020-12-16 Martin Liska <mliska@suse.cz>
* doc/options.texi: Remove Report keyword.
* opt-functions.awk: Print error when Report keyword
is used.
* optc-gen.awk: Do not handle Report keyword.
* opts.h (struct cl_option): Remove cl_report bitfield flag.
2020-12-16 Martin Liska <mliska@suse.cz>
PR sanitizer/97868
* common.opt: Add new warning -Wtsan.
* doc/invoke.texi: Likewise.
* tsan.c (instrument_builtin_call): Warn users about unsupported
std::atomic_thread_fence.
2020-12-16 Martin Liska <mliska@suse.cz>
PR rtl-optimization/98271
PR rtl-optimization/98276
PR tree-optimization/98279
* opts-common.c (set_option): Do not allow overflow for integer
arguments.
2020-12-16 Eric Botcazou <ebotcazou@adacore.com>
PR tree-optimization/98272
* tree-switch-conversion.c (bit_test_cluster::emit): When finding
out whether the entry test can be merged in the bit test, do the
computation using the type of the index expression.
2020-12-16 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_expand_vector_init): Use
paradoxical subreg instead of zero_extend for QI/HI promotion.
2020-12-16 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/66791
* config/arm/arm_neon.h: Replace calls to __builtin_vcgt* by
<, > operators in vclt and vcgt intrinsics respectively.
* config/arm/arm_neon_builtins.def: Remove entry for
vcgt and vcgtu.
2020-12-16 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/66791
* config/arm/arm_neon.h: Replace calls to __builtin_vneg* by - operator
in vneg intrinsics.
* config/arm/arm_neon_builtins.def: Remove entry for vneg.
2020-12-16 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/66791
* config/arm/arm_neon.h: Replace calls to __builtin_vcreate*
in vcreate intrinsics.
* config/arm/arm_neon_builtins.def: Remove entry for vcreate.
2020-12-15 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96094
* match.pd (X / bool_range_Y -> X): New simplification.
2020-12-15 Nathan Sidwell <nathan@acm.org>
* doc/cppopts.texi: Document new cpp opt.
* doc/invoke.texi: Add C++20 module option & documentation.
2020-12-15 Nathan Sidwell <nathan@acm.org>
* Makefile.in (CODYINC, CODYLIB, CODYLIB_H): New. Use them.
2020-12-15 Jakub Jelinek <jakub@redhat.com>
PR target/98274
* config/i386/i386-options.c (ix86_option_override_internal): Set
ix86_tune_string to "generic" even when it wasn't specified and
ix86_arch_string is "x86-64-v2", "x86-64-v3" or "x86-64-v4".
Remove useless {}s around a single statement.
2020-12-15 Martin Liska <mliska@suse.cz>
PR lto/98275
* lto-wrapper.c: Do not use -j0 when we are unable to detect
number of cores.
2020-12-15 Jakub Jelinek <jakub@redhat.com>
* config/i386/i386-options.c (ix86_option_override_internal): Don't
error on -march=x86-64-v[234] with -m32 or -mabi=ms.
* config.gcc: Don't reject --with-arch=x86-64-v[234] or
--with-arch_32=x86-64-v[234].
* doc/invoke.texi (-march=x86-64-v[234]): Document what the option
does for other ABIs.
2020-12-15 Martin Liska <mliska@suse.cz>
PR gcov-profile/98273
* gcov.c (output_json_intermediate_file): Use stack of nested
functions for lines in a source file. Pop when a function ends.
2020-12-15 Gerald Pfeifer <gerald@pfeifer.com>
* doc/invoke.texi (Instrumentation Options): Update link to
KernelAddressSanitizer.
2020-12-15 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/predicates.md (addsubx_operand): Change accepted
values from 2/4/8 to 1..3.
* config/xtensa/xtensa.md (*addx, *subx): Change RTL pattern
to use 'ashift' instead of 'mult'. Update operands[3] value.
2020-12-14 Piotr Kubaj <pkubaj@FreeBSD.org>
Gerald Pfeifer <gerald@pfeifer.com>
* config/rs6000/freebsd64.h (PROCESSOR_DEFAULT): Update
to PROCESSOR_PPC7450.
(PROCESSOR_DEFAULT64): Update to PROCESSOR_POWER8.
2020-12-14 Martin Sebor <msebor@redhat.com>
PR middle-end/98166
PR c++/57111
PR middle-end/98160
* builtins.c (check_access): Call tree_inlined_location
fndecl_alloc_p): Handle BUILT_IN_ALIGNED_ALLOC and
BUILT_IN_GOMP_ALLOC.
call_dealloc_p): Remove unused function.
(new_delete_mismatch_p): Call valid_new_delete_pair_p and rework.
(matching_alloc_calls_p): Handle built-in deallocation functions.
(warn_dealloc_offset): Corrct the handling of user-defined operators
delete.
(maybe_emit_free_warning): Avoid assuming expression is a decl.
Simplify.
* doc/extend.texi (attribute malloc): Update.
* tree-ssa-dce.c (valid_new_delete_pair_p): Factor code out into
valid_new_delete_pair_p in tree.c.
* tree.c (tree_inlined_location): Define new function.
(valid_new_delete_pair_p): Define.
* tree.h (tree_inlined_location): Declare.
(valid_new_delete_pair_p): Declare.
2020-12-14 Sebastian Pop <spop@amazon.com>
* config.gcc (aarch64*-*-*): Remove --with-{cpu,arch,tune}-32 flags.
2020-12-14 Wilco Dijkstra <wdijkstr@arm.com>
* config.gcc (aarch64*-*-*): Add --with-tune. Support --with-cpu=native.
* config/aarch64/aarch64.h (OPTION_DEFAULT_SPECS): Add --with-tune.
2020-12-14 Martin Liska <mliska@suse.cz>
* gcov.c (output_json_intermediate_file): Update comments.
2020-12-14 Tamar Christina <tamar.christina@arm.com>
PR middle-end/98264
* tree-vect-slp-patterns.c (linear_loads_p): Exclude TOP permute.
2020-12-14 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/mve.md (mve_vnegq_f): Use 'neg' instead of unspec.
(mve_vnegq_s): Likewise.
* config/arm/neon.md (neg<mode>2): Rename into neon_neg<mode>2.
(<absneg_str><mode>2): Rename into neon_<absneg_str><mode>2.
(neon_v<absneg_str><mode>): Call gen_neon_<absneg_str><mode>2.
(vashr<mode>3): Call gen_neon_neg<mode>2.
(vlshr<mode>3): Call gen_neon_neg<mode>2.
(neon_vneg<mode>): Call gen_neon_neg<mode>2.
* config/arm/unspecs.md (VNEGQ_F, VNEGQ_S): Remove.
* config/arm/vec-common.md (neg<mode>2): New expander.
2020-12-14 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (VDQNOTM2): New mode iterator.
(supf): Remove VMVNQ_S and VMVNQ_U.
(VMVNQ): Remove.
* config/arm/mve.md (mve_vmvnq_u<mode>): New entry for vmvn
instruction using expression not.
(mve_vmvnq_s<mode>): New expander.
* config/arm/neon.md (one_cmpl<mode>2): Renamed into
one_cmpl<mode>2_neon.
* config/arm/unspecs.md (VMVNQ_S, VMVNQ_U): Remove.
* config/arm/vec-common.md (one_cmpl<mode>2): New expander.
2020-12-14 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (supf): Remove VBICQ_S and VBICQ_U.
(VBICQ): Remove.
* config/arm/mve.md (mve_vbicq_u<mode>): New entry for vbic
instruction using expression and not.
(mve_vbicq_s<mode>): New expander.
(mve_vbicq_f<mode>): Replace use of unspec by 'and not'.
* config/arm/unspecs.md (VBICQ_S, VBICQ_U, VBICQ_F): Remove.
2020-12-14 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (supf): Remove VEORQ_S and VEORQ_U.
(VEORQ): Remove.
* config/arm/mve.md (mve_veorq_u<mode>): New entry for veor
instruction using expression xor.
(mve_veorq_s<mode>): New expander.
(mve_veorq_f<mode>): Use 'xor' code instead of unspec.
* config/arm/neon.md (xor<mode>3): Renamed into xor<mode>3_neon.
* config/arm/unspecs.md (VEORQ_S, VEORQ_U, VEORQ_F): Remove.
* config/arm/vec-common.md (xor<mode>3): New expander.
2020-12-14 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/aarch64/aarch64-cores.def (AARCH64_CORE): Add Cortex-A78C core.
* config/aarch64/aarch64-tune.md: Regenerate.
* doc/invoke.texi: Update docs.
2020-12-14 Nikhil Benesch <nikhil.benesch@gmail.com>
* godump.c (go_output_typedef): Suppress typedefs whose name
matches the tag of the underlying struct, union, or enum.
Output declarations for enums that do not appear in typedefs.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_output_int_move): Unify push operation
selection.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_output_int_move): Check the correct
operand for constant 0 push operation.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_expand_addsub_di_operands): Handle equal
input operands with subtraction.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_expand_addsub_di_operands): Handle the
addition or subtraction of 0.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_expand_addsub_di_operands): Remove
unused register allocation.
2020-12-13 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (casesi): Use `gen_int_mode' rather than
`GEN_INT' for the immediate used for lower bound adjustment.
2020-12-13 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98256
* tree-ssa-math-opts.c (match_uaddsub_overflow): For BIT_NOT_EXPR,
only handle a single use, and insert .ADD_OVERFLOW before the
comparison rather than after the BIT_NOT_EXPR. Return true iff
it is BIT_NOT_EXPR and it has been removed.
(math_opts_dom_walker::after_dom_children) <case BIT_NOT_EXPR>:
If match_uaddsub_overflow returned true, continue instead of break.
2020-12-13 Tamar Christina <tamar.christina@arm.com>
Revert:
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm_mve.h (__arm_vcaddq_rot90_u8, __arm_vcaddq_rot270_u8,
, __arm_vcaddq_rot90_s8, __arm_vcaddq_rot270_s8,
__arm_vcaddq_rot90_u16, __arm_vcaddq_rot270_u16, __arm_vcaddq_rot90_s16,
__arm_vcaddq_rot270_s16, __arm_vcaddq_rot90_u32,
__arm_vcaddq_rot270_u32, __arm_vcaddq_rot90_s32,
__arm_vcaddq_rot270_s32, __arm_vcmulq_rot90_f16,
__arm_vcmulq_rot270_f16, __arm_vcmulq_rot180_f16,
__arm_vcmulq_f16, __arm_vcaddq_rot90_f16, __arm_vcaddq_rot270_f16,
__arm_vcmulq_rot90_f32, __arm_vcmulq_rot270_f32,
__arm_vcmulq_rot180_f32, __arm_vcmulq_f32, __arm_vcaddq_rot90_f32,
__arm_vcaddq_rot270_f32, __arm_vcmlaq_f16, __arm_vcmlaq_rot180_f16,
__arm_vcmlaq_rot270_f16, __arm_vcmlaq_rot90_f16, __arm_vcmlaq_f32,
__arm_vcmlaq_rot180_f32, __arm_vcmlaq_rot270_f32,
__arm_vcmlaq_rot90_f32): Update builtin calls.
* config/arm/arm_mve_builtins.def (vcaddq_rot90_u, vcaddq_rot270_u,
vcaddq_rot90_s, vcaddq_rot270_s, vcaddq_rot90_f, vcaddq_rot270_f,
vcmulq_f, vcmulq_rot90_f, vcmulq_rot180_f, vcmulq_rot270_f,
vcmlaq_f, vcmlaq_rot90_f, vcmlaq_rot180_f, vcmlaq_rot270_f): Removed.
(vcaddq_rot90, vcaddq_rot270, vcmulq, vcmulq_rot90, vcmulq_rot180,
vcmulq_rot270, vcmlaq, vcmlaq_rot90, vcmlaq_rot180, vcmlaq_rot270):
New.
* config/arm/constraints.md (Dz): Include MVE.
* config/arm/iterators.md (mve_rotsplit1, mve_rotsplit2): New.
(rot): Add UNSPEC_VCMLS, UNSPEC_VCMUL and UNSPEC_VCMUL180.
(rot_op, rotsplit1, rotsplit2, fcmac1, VCMLA_OP, VCMUL_OP): New.
* config/arm/mve.md (VCADDQ_ROT270_S, VCADDQ_ROT90_S, VCADDQ_ROT270_U,
VCADDQ_ROT90_U, VCADDQ_ROT270_F, VCADDQ_ROT90_F, VCMULQ_F,
VCMULQ_ROT180_F, VCMULQ_ROT270_F, VCMULQ_ROT90_F, VCMLAQ_F,
VCMLAQ_ROT180_F, VCMLAQ_ROT90_F, VCMLAQ_ROT270_F, VCADDQ_ROT270_S,
VCADDQ_ROT270, VCADDQ_ROT90): Removed.
(mve_rot, VCMUL): New.
(mve_vcaddq_rot270_<supf><mode, mve_vcaddq_rot90_<supf><mode>,
mve_vcaddq_rot270_f<mode>, mve_vcaddq_rot90_f<mode>, mve_vcmulq_f<mode,
mve_vcmulq_rot180_f<mode>, mve_vcmulq_rot270_f<mode>,
mve_vcmulq_rot90_f<mode>, mve_vcmlaq_f<mode>, mve_vcmlaq_rot180_f<mode>,
mve_vcmlaq_rot270_f<mode>, mve_vcmlaq_rot90_f<mode>): Removed.
(mve_vcmlaq<mve_rot><mode>, mve_vcmulq<mve_rot><mode>,
mve_vcaddq<mve_rot><mode>, cadd<rot><mode>3, mve_vcaddq<mve_rot><mode>):
New.
(cmul<rot_op><mode>3): Exclude MVE types.
* config/arm/unspecs.md (UNSPEC_VCMUL90, UNSPEC_VCMUL270): New.
* config/arm/vec-common.md (cadd<rot><mode>3, cmul<rot_op><mode>3,
arm_vcmla<rot><mode>, cml<fcmac1><rot_op><mode>4): New.
* config/arm/unspecs.md (UNSPEC_VCMUL, UNSPEC_VCMUL180, UNSPEC_VCMLS,
UNSPEC_VCMLS180): New.
* config/arm/neon.md (cmul<rot_op><mode>3): New.
2020-12-13 Jakub Jelinek <jakub@redhat.com>
PR target/92469
* varasm.c (eliminable_regno_p): New function.
(make_decl_rtl): Reject asm vars for frame and argp
if they are different from hard frame pointer.
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm_mve.h (__arm_vcaddq_rot90_u8, __arm_vcaddq_rot270_u8,
, __arm_vcaddq_rot90_s8, __arm_vcaddq_rot270_s8,
__arm_vcaddq_rot90_u16, __arm_vcaddq_rot270_u16, __arm_vcaddq_rot90_s16,
__arm_vcaddq_rot270_s16, __arm_vcaddq_rot90_u32,
__arm_vcaddq_rot270_u32, __arm_vcaddq_rot90_s32,
__arm_vcaddq_rot270_s32, __arm_vcmulq_rot90_f16,
__arm_vcmulq_rot270_f16, __arm_vcmulq_rot180_f16,
__arm_vcmulq_f16, __arm_vcaddq_rot90_f16, __arm_vcaddq_rot270_f16,
__arm_vcmulq_rot90_f32, __arm_vcmulq_rot270_f32,
__arm_vcmulq_rot180_f32, __arm_vcmulq_f32, __arm_vcaddq_rot90_f32,
__arm_vcaddq_rot270_f32, __arm_vcmlaq_f16, __arm_vcmlaq_rot180_f16,
__arm_vcmlaq_rot270_f16, __arm_vcmlaq_rot90_f16, __arm_vcmlaq_f32,
__arm_vcmlaq_rot180_f32, __arm_vcmlaq_rot270_f32,
__arm_vcmlaq_rot90_f32): Update builtin calls.
* config/arm/arm_mve_builtins.def (vcaddq_rot90_u, vcaddq_rot270_u,
vcaddq_rot90_s, vcaddq_rot270_s, vcaddq_rot90_f, vcaddq_rot270_f,
vcmulq_f, vcmulq_rot90_f, vcmulq_rot180_f, vcmulq_rot270_f,
vcmlaq_f, vcmlaq_rot90_f, vcmlaq_rot180_f, vcmlaq_rot270_f): Removed.
(vcaddq_rot90, vcaddq_rot270, vcmulq, vcmulq_rot90, vcmulq_rot180,
vcmulq_rot270, vcmlaq, vcmlaq_rot90, vcmlaq_rot180, vcmlaq_rot270):
New.
* config/arm/constraints.md (Dz): Include MVE.
* config/arm/iterators.md (mve_rotsplit1, mve_rotsplit2): New.
(rot): Add UNSPEC_VCMLS, UNSPEC_VCMUL and UNSPEC_VCMUL180.
(rot_op, rotsplit1, rotsplit2, fcmac1, VCMLA_OP, VCMUL_OP): New.
* config/arm/mve.md (VCADDQ_ROT270_S, VCADDQ_ROT90_S, VCADDQ_ROT270_U,
VCADDQ_ROT90_U, VCADDQ_ROT270_F, VCADDQ_ROT90_F, VCMULQ_F,
VCMULQ_ROT180_F, VCMULQ_ROT270_F, VCMULQ_ROT90_F, VCMLAQ_F,
VCMLAQ_ROT180_F, VCMLAQ_ROT90_F, VCMLAQ_ROT270_F, VCADDQ_ROT270_S,
VCADDQ_ROT270, VCADDQ_ROT90): Removed.
(mve_rot, VCMUL): New.
(mve_vcaddq_rot270_<supf><mode, mve_vcaddq_rot90_<supf><mode>,
mve_vcaddq_rot270_f<mode>, mve_vcaddq_rot90_f<mode>, mve_vcmulq_f<mode,
mve_vcmulq_rot180_f<mode>, mve_vcmulq_rot270_f<mode>,
mve_vcmulq_rot90_f<mode>, mve_vcmlaq_f<mode>, mve_vcmlaq_rot180_f<mode>,
mve_vcmlaq_rot270_f<mode>, mve_vcmlaq_rot90_f<mode>): Removed.
(mve_vcmlaq<mve_rot><mode>, mve_vcmulq<mve_rot><mode>,
mve_vcaddq<mve_rot><mode>, cadd<rot><mode>3, mve_vcaddq<mve_rot><mode>):
New.
(cmul<rot_op><mode>3): Exclude MVE types.
* config/arm/unspecs.md (UNSPEC_VCMUL90, UNSPEC_VCMUL270): New.
* config/arm/vec-common.md (cadd<rot><mode>3, cmul<rot_op><mode>3,
arm_vcmla<rot><mode>, cml<fcmac1><rot_op><mode>4): New.
* config/arm/unspecs.md (UNSPEC_VCMUL, UNSPEC_VCMUL180, UNSPEC_VCMLS,
UNSPEC_VCMLS180): New.
* config/arm/neon.md (cmul<rot_op><mode>3): New.
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* config/arm/arm.c (arm_preferred_simd_mode): Add E_HFmode.
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* tree-vect-slp-patterns.c: New file.
* Makefile.in: Add it.
* doc/passes.texi: Document it.
* internal-fn.def (COMPLEX_ADD_ROT90, COMPLEX_ADD_ROT270): New.
* optabs.def (cadd90_optab, cadd270_optab): New.
* doc/md.texi: Document them.
* tree-vect-loop.c (vect_analyze_loop_2): Add dissolve code.
* tree-vect-slp.c:
(vect_free_slp_instance, vect_create_new_slp_node): Export.
(vect_match_slp_patterns_2, vect_match_slp_patterns): New.
(vect_analyze_slp): Use it.
* tree-vectorizer.h (vect_free_slp_tree): Export.
(enum _complex_operation): Forward declare.
(class vect_pattern): New
2020-12-13 Tamar Christina <tamar.christina@arm.com>
* tree-vect-patterns.c (vect_mark_pattern_stmts): Remove static inline.
* tree-vect-slp.c (vect_create_new_slp_node): Remove static and only
set smts if valid.
* tree-vectorizer.c (vec_info::add_pattern_stmt): New.
(vec_info::set_vinfo_for_stmt): Optionally enforce read-only.
* tree-vectorizer.h (struct _slp_tree): Use new types.
(lane_permutation_t, lane_permutation_t): New.
(vect_create_new_slp_node, vect_mark_pattern_stmts): New.
2020-12-13 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* doc/sourcebuild.texi (Commands for use in dg-final, Scan the
assembly output, scan-assembler-symbol-section): Document.
(scan-symbol-section): Document.
2020-12-13 Richard Sandiford <richard.sandiford@arm.com>
* is-a.h (reinterpret_is_a_helper): New class.
(static_is_a_helper): Likewise.
(is_a_helper): Inherit from reinterpret_is_a_helper.
(is_a_helper<const T *>): New specialization.
2020-12-13 Richard Sandiford <richard.sandiford@arm.com>
* coretypes.h (iterator_range): Move to...
* iterator-utils.h: ...this new file.
2020-12-13 Richard Sandiford <richard.sandiford@arm.com>
* rtlanal.c (noop_move_p): Don't check for REG_EQUAL notes.
2020-12-13 Richard Sandiford <richard.sandiford@arm.com>
* vec.h (vnull::operator vec<T, A, L>): Make const.
2020-12-12 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96685
* match.pd (~(X - Y) -> ~X + Y): New optimization.
(~X + Y -> (Y - X) - 1): Likewise.
2020-12-12 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96272
* tree-ssa-math-opts.c (uaddsub_overflow_check_p): Add OTHER argument.
Handle BIT_NOT_EXPR.
(match_uaddsub_overflow): Optimize unsigned a > ~b into
__imag__ .ADD_OVERFLOW (a, b).
(math_opts_dom_walker::after_dom_children): Call match_uaddsub_overflow
even for BIT_NOT_EXPR.
2020-12-12 Jakub Jelinek <jakub@redhat.com>
PR middle-end/98183
* omp-low.c (lower_omp_target): Don't add OMP_RETURN for
data regions.
* omp-expand.c (expand_omp_target): Don't try to remove
OMP_RETURN for data regions.
(build_omp_regions_1, omp_make_gimple_edges): Don't expect
OMP_RETURN for data regions.
2020-12-11 Nathan Sidwell <nathan@acm.org>
* gcc.c (cpp_unique_options): Add Mmodules, Mno-modules.
* tree-core.h (enum tree_index): Add TI_MODULE_HWM.
2020-12-11 Jim Wilson <jimw@sifive.com>
* varasm.c (get_section): Add DECL_P check before DECL_PRESERVE_P.
2020-12-11 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (VDQ): Remove TARGET_HAVE_MVE
conditions.
* config/arm/vec-common.md (and<mode>3): Use
ARM_HAVE_<MODE>_ARITH.
(ior<mode>3): Likewise.
2020-12-11 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_active_insn): Ignore all non essential
instructions when getting the next active instruction.
(check_store_cacheline_hazard): Update.
(workaround_arc_anomaly): Remove obsolete cache hazard code.
2020-12-11 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_reorg): Avoid limm in BRcc.
2020-12-11 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc-protos.h (arc_scheduling_not_expected): Remove
it.
(arc_sets_cc_p): Likewise.
(arc_need_delay): Likewise.
* config/arc/arc.c (arc_sets_cc_p): Likewise.
(arc_need_delay): Likewise.
(arc_scheduling_not_expected): Likewise.
* config/arc/arc.md: Convert adc/sbc patterns to simple
instruction definitions.
2020-12-11 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (supf): Remove VORRQ_S and VORRQ_U.
(VORRQ): Remove.
* config/arm/mve.md (mve_vorrq_s<mode>): New entry for vorr
instruction using expression ior.
(mve_vorrq_u<mode>): New expander.
(mve_vorrq_f<mode>): Use ior code instead of unspec.
* config/arm/neon.md (ior<mode>3): Renamed into ior<mode>3_neon.
* config/arm/predicates.md (imm_for_neon_logic_operand): Enable
for MVE.
* config/arm/unspecs.md (VORRQ_S, VORRQ_U, VORRQ_F): Remove.
* config/arm/vec-common.md (ior<mode>3): New expander.
2020-12-11 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.md (mpyd<su_optab>_arcv2hs): New template
pattern.
(*pmpyd<su_optab>_arcv2hs): Likewise.
(*pmpyd<su_optab>_imm_arcv2hs): Likewise.
(mpyd_arcv2hs): Moved into above template.
(mpyd_imm_arcv2hs): Moved into above template.
(mpydu_arcv2hs): Likewise.
(mpydu_imm_arcv2hs): Likewise.
(su_optab): New optab prefix for sign/zero-extending operations.
2020-12-11 H.J. Lu <hjl.tools@gmail.com>
PR target/98219
* config/i386/uintrintrin.h (__uintr_frame): Remove uirrv.
2020-12-11 Andrea Corallo <andrea.corallo@arm.com>
* doc/sourcebuild.texi (arm_softfloat): Improve documentation.
2020-12-11 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/98229
* optabs.c (expand_doubleword_mod): Canonicalize op1 and
1 - INTVAL (op1) as word_mode constants when used in
word_mode arithmetics.
2020-12-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/98235
* tree-vect-slp.c (vect_build_slp_tree): Exchange npermutes
for limit. Decrement that for each cache miss and fail
discovery when it reaches zero.
(vect_build_slp_tree_2): Remove npermutes handling and
simply pass down limit.
(vect_build_slp_instance): Use pass down limit.
(vect_analyze_slp_instance): Likewise.
(vect_analyze_slp): Base the SLP discovery limit on
max_tree_size and pass it down.
2020-12-11 Jakub Jelinek <jakub@redhat.com>
PR middle-end/98190
* expr.c (expand_assignment): If to_rtx is a promoted SUBREG,
ensure sign or zero extension either through use of store_expr
or by extending manually.
2020-12-11 Andrea Corallo <andrea.corallo@arm.com>
PR rtl-optimization/97092
* ira-color.c (update_costs_from_allocno): Do not carry over mode
between subsequent iterations.
2020-12-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/95582
* tree-vect-patterns.c (vect_recog_bool_pattern): Check
for VECT_SCALAR_BOOLEAN_TYPE_P, not just precision one.
2020-12-11 Hongyu <hongyu.wang@intel.com>
* common/config/i386/cpuinfo.h (get_available_features):
Move check for HRESET/AVX_VNNI/UINTR out of avx512_usable.
2020-12-10 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/98212
* dojump.c (do_compare_rtx_and_jump): Change computation of
first_prob for and_them. Add comment explaining and_them case.
2020-12-10 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/98174
* gimple-range-cache.cc (ranger_cache::ssa_range_in_bb): Only push
poor values to be examined if it isn't a pure global.
(ranger_cache::block_range): Don't process pure globals.
(ranger_cache::fill_block_cache): Adjust has_edge_range call.
* gimple-range-gori.cc (gori_map::all_outgoing): New bitmap.
(gori_map::gori_map): Allocate all_outgoing.
(gori_map::is_export_p): No specified BB returns global context.
(gori_map::calculate_gori): Accumulate each block into global.
(gori_compute::gori_compute): Preprocess each block for exports.
(gori_compute::has_edge_range_p): No edge returns global context.
* gimple-range-gori.h (has_edge_range_p): Provide default parameter.
2020-12-10 Eric Botcazou <ebotcazou@adacore.com>
* dwarf2out.c (loc_list_from_tree_1) <PLACEHOLDER_EXPR>: Deal with
a nested context type
2020-12-10 Bernd Edlinger <bernd.edlinger@hotmail.de>
* cfgexpand.c (expand_gimple_basic_block): Remove special handling
of debug_inline_entries without block info.
* tree-inline.c (remap_gimple_stmt): Drop debug_nonbind_markers when
the call statement has no block info.
(copy_debug_stmt): Remove debug_nonbind_markers when inlining
and the block info is mapped to NULL.
* tree-ssa-live.c (clear_unused_block_pointer): Remove
debug_nonbind_markers originating from removed inline functions.
2020-12-10 Richard Biener <rguenther@suse.de>
* tree-vect-stmts.c (vectorizable_assignment): Remove special
allowance of VECTOR_BOOLEAN_TYPE_P conversions.
2020-12-10 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/iterators.md (supf): Remove VANDQ_S and VANDQ_U.
(VANQ): Remove.
(VDQ): Add TARGET_HAVE_MVE condition where relevant.
* config/arm/mve.md (mve_vandq_u<mode>): New entry for vand
instruction using expression 'and'.
(mve_vandq_s<mode>): New expander.
(mve_vaddq_n_f<mode>): Use 'and' code instead of unspec.
* config/arm/neon.md (and<mode>3): Rename into and<mode>3_neon.
* config/arm/predicates.md (imm_for_neon_inv_logic_operand):
Enable for MVE.
* config/arm/unspecs.md (VANDQ_S, VANDQ_U, VANDQ_F): Remove.
* config/arm/vec-common.md (and<mode>3): New expander.
2020-12-10 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/98069
* tree-data-ref.c (compute_distributive_range): New function.
(nop_conversion_for_offset_p): Likewise.
(split_constant_offset): In the internal overload, treat integer
expressions as having an implicit cast to sizetype and express
them accordingly. Pass back the range of the original (uncast)
expression in a new range parameter.
(split_constant_offset_1): Likewise. Rework the handling of
conversions to account for the implicit sizetype casts.
2020-12-10 Joel Hutton <joel.hutton@arm.com>
PR tree-optimization/97929
* tree-vect-data-refs.c (vect_get_smallest_scalar_type): Add
WIDEN_PLUS/WIDEN_MINUS case.
2020-12-10 Joel Hutton <joel.hutton@arm.com>
* tree-pretty-print.c (dump_generic_node): Add case for
VEC_WIDEN_(PLUS/MINUS)_(HI/LO)_EXPR and WIDEN_(PLUS/MINUS)_EXPR.
2020-12-10 Richard Biener <rguenther@suse.de>
PR tree-optimization/98211
* tree-vect-stmts.c (vectorizable_assignment): Disallow
invalid conversions to bool vector types.
2020-12-10 Alexandre Oliva <oliva@adacore.com>
* tree.c (build_common_builtin_nodes): Drop __builtin_ from
__clear_cache libname.
2020-12-10 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/98212
* dojump.c (do_compare_rtx_and_jump): When splitting NE and backend
can do UNEQ, prefer splitting x != y into x unord y || !(x uneq y)
instead of into x unord y || x ltgt y.
2020-12-10 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98169
* dojump.c (do_compare_rtx_and_jump): Don't split self-EQ/NE
comparisons, just use ORDERED or UNORDERED.
2020-12-10 Jakub Jelinek <jakub@redhat.com>
PR middle-end/98205
* omp-expand.c (expand_omp_for_generic): Fix up broken_loop handling.
2020-12-10 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): Do
not mark the defs to occur in a pattern if it is the
pattern root and record the original stmt defs in that
case.
2020-12-10 Simon Cook <simon.cook@embecosm.com>
* config/riscv/multilib-generator (arch_canonicalize): Invoke
python interpreter when calling arch-canonicalize script.
2020-12-10 Nikhil Benesch <nikhil.benesch@gmail.com>
* godump.c (go_format_type): Don't consider whether a type has
been seen when determining whether to output a type by name.
Consider only the use_type_name parameter.
(go_output_typedef): When outputting a typedef, format the
declaration's original type, which contains the name of the
underlying type rather than the name of the typedef.
2020-12-09 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/98188
* tree-ssa-phiopt.c (two_value_replacement): Don't special case
BOOLEAN_TYPEs for ranges, instead if get_range_info doesn't return
VR_RANGE, set min/max to wi::min/max_value.
2020-12-09 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/aarch64/aarch64-option-extensions.def
(AARCH64_OPT_EXTENSION): New +pauth option in -march for AArch64.
* config/aarch64/aarch64.h (AARCH64_FL_PAUTH): New pauth extension bitmask.
(AARCH64_ISA_PUATH): New ISA bitmask for PAUTH.
(AARCH64_FL_FOR_ARCH8_3): Add PAUTH to Armv8.3-A.
(TARGET_PAUTH): New target mask to isolate PAUTH instructions.
* config/aarch64/aarch64.md (do_return): Condition set to TARGET_PAUTH.
* doc/invoke.texi: Update docs for +flagm and +pauth.
2020-12-09 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386.h (REG_ALLOC_ORDER): Remove
2020-12-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/98213
* tree-ssa-loop-im.c (sm_seq_valid_bb): Cache successfully
processed PHIs.
(hoist_memory_references): Adjust.
2020-12-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/aarch64/aarch64-protos.h (cpu_vector_cost): Move simd
fields to...
(simd_vec_cost): ... Here. Define.
(advsimd_vec_cost): Define.
(sve_vec_cost): Define.
* config/aarch64/aarch64.c (generic_advsimd_vector_cost):
Define.
(generic_sve_vector_cost): Likewise.
(generic_vector_cost): Update.
(qdf24xx_advsimd_vector_cost): Define.
(qdf24xx_vector_cost): Update.
(thunderx_advsimd_vector_cost): Define.
(thunderx_vector_cost): Update.
(tsv110_advsimd_vector_cost): Define.
(tsv110_vector_cost): Likewise.
(cortexa57_advsimd_vector_cost): Define.
(cortexa57_vector_cost): Update.
(exynosm1_advsimd_vector_cost): Define.
(exynosm1_vector_cost): Update.
(xgene1_advsimd_vector_cost): Define.
(xgene1_vector_cost): Update.
(thunderx2t99_advsimd_vector_cost): Define.
(thunderx2t99_vector_cost): Update.
(thunderx3t110_advsimd_vector_cost): Define.
(thunderx3t110_vector_cost): Update.
(aarch64_builtin_vectorization_cost): Handle sve and advsimd
vector cost fields.
2020-12-09 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/98199
* fold-const.c (native_encode_initializer): Fix handling bit-fields
when off > 0.
2020-12-09 Jakub Jelinek <jakub@redhat.com>
PR c++/98193
* fold-const.c (native_encode_initializer): Set pos to field's
byte position if iterating over a field with missing initializer.
2020-12-08 Martin Liska <mliska@suse.cz>
PR tree-optimization/98182
* gimple-if-to-switch.cc (pass_if_to_switch::execute): Request
chain linkage through false edges only.
2020-12-08 Nathan Sidwell <nathan@acm.org>
* tree.h (DECL_ALIGN_RAW): New.
(DECL_ALIGN): Use it.
(DECL_WARN_IF_NOT_ALIGN_RAW): New.
(DECL_WARN_IF_NOT_ALIGN): Use it.
(SET_DECL_WARN_IF_NOT_ALIGN): Likewise.
2020-12-08 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/66791
* config/arm/arm_neon.h: Replace calls to __builtin_vmvn* by ~
in vmvn intrinsics.
* config/arm/arm_neon_builtins.def: Remove entry for vmvn.
2020-12-08 Jakub Jelinek <jakub@redhat.com>
PR target/94440
* config/i386/i386.opt (ix86_excess_precision,
ix86_unsafe_math_optimizations): New TargetVariables.
* config/i386/i386.h (X87_ENABLE_ARITH, X87_ENABLE_FLOAT): Use
ix86_unsafe_math_optimizations instead of
flag_unsafe_math_optimizations and ix86_excess_precision instead of
flag_excess_precision.
* config/i386/i386.c (ix86_excess_precision): Rename to ...
(ix86_get_excess_precision): ... this.
(TARGET_C_EXCESS_PRECISION): Define to ix86_get_excess_precision.
* config/i386/i386-options.c (ix86_valid_target_attribute_tree,
ix86_option_override_internal): Update ix86_unsafe_math_optimization
from flag_unsafe_math_optimizations and ix86_excess_precision
from flag_excess_precision when constructing target option nodes.
(ix86_set_current_function): If flag_unsafe_math_optimizations
or flag_excess_precision is different from the one recorded
in TARGET_OPTION_NODE, create a new target option node for the
current function and switch to that.
2020-12-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/98192
* tree-vect-slp.c (vect_build_slp_instance): Get scalar_stmts
by reference.
2020-12-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/98191
* tree-vect-slp.c (vect_slp_check_for_constructors): Do not
follow a non-SSA def chain.
2020-12-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/97559
* tree-ssa-sink.c (statement_sink_location): Never ignore
PHIs on sink paths in irreducible regions.
2020-12-08 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/97872
* gimple-isel.cc (gimple_expand_vec_cond_expr): Try to fold
x CMP y ? -1 : 0 to x CMP y.
2020-12-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/98180
* tree-vect-slp.c (vect_slp_check_for_constructors): Check the
first inserted value has a def.
2020-12-08 Eric Botcazou <ebotcazou@adacore.com>
PR tree-optimization/96344
* tree-switch-conversion.c (bit_test_cluster::emit): Compute the
range only if an entry test is necessary. Merge the entry test in
the bit test when possible. Use PREC local variable consistently.
When there is only one test, do a single gimplification at the end.
2020-12-08 Kito Cheng <kito.cheng@sifive.com>
PR target/98152
* config.gcc (riscv*-*-*): Checking python, python3 or python2
is available, and skip doing with_arch canonicalize if no python
available.
2020-12-07 Jakub Jelinek <jakub@redhat.com>
PR target/98147
* builtins.c (default_emit_call_builtin___clear_cache): Call
convert_memory_address to ptr_mode on both begin and end.
2020-12-07 Bernd Edlinger <bernd.edlinger@hotmail.de>
* ipa-param-manipulation.c
(ipa_param_body_adjustments::modify_call_stmt): Set location info.
2020-12-07 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* doc/extend.texi (used function attribute): Document saving
the declaration from linker garbage collection.
(used variable attribute): Likewise.
2020-12-07 Richard Biener <rguenther@suse.de>
PR tree-optimization/98113
* tree-vectorizer.h (struct slp_root): New.
(_bb_vec_info::roots): New member.
* tree-vect-slp.c (vect_analyze_slp): Also walk BB info
roots.
(_bb_vec_info::_bb_vec_info): Adjust.
(_bb_vec_info::~_bb_vec_info): Likewise.
(vld_cmp): New.
(vect_slp_is_lane_insert): Likewise.
(vect_slp_check_for_constructors): Match a series of
BIT_INSERT_EXPRs as vector constructor.
(vect_slp_analyze_bb_1): Continue if BB info roots is
not empty.
(vect_slp_analyze_bb_1): Mark the whole BIT_INSERT_EXPR root
sequence as pure_slp.
2020-12-07 Richard Biener <rguenther@suse.de>
PR tree-optimization/98117
* tree-vect-loop-manip.c (vect_gen_vector_loop_niters):
Properly handle degenerate niter when setting the vector
loop IV range.
2020-12-07 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/s390.c (s390_emit_stack_probe): Change Pmode to
word_mode.
2020-12-07 Martin Jambor <mjambor@suse.cz>
PR ipa/97816
* ipa-cp.c (safe_add): Removed.
(good_cloning_opportunity_p): Remove special handling of INT_MAX.
(value_topo_info<valtype>::propagate_effects): Take care not to
propagate from size one value to another through more sources. Scale
propagated times with edge frequencies. Include local time and size
in propagates ones here. Take care not to overflow size.
(decide_about_value): Do not add local and propagated effects when
passing them to good_cloning_opportunity_p.
2020-12-07 Matthias Klose <doko@ubuntu.com>
* genextract.c (print_header): Undefine ENABLE_RTL_CHECKING
and ENABLE_RTL_FLAG_CHECKING.
2020-12-07 Richard Biener <rguenther@suse.de>
PR tree-optimization/98137
* tree-data-ref.c (split_constant_offset_1): Use
determine_value_range instead of get_range_info to handle
arbitrary expressions.
2020-12-06 H.J. Lu <hjl.tools@gmail.com>
PR target/98162
* doc/extend.texi: Remove -mcet.
2020-12-06 H.J. Lu <hjl.tools@gmail.com>
PR target/98161
* config/i386/i386-features.c (pseudo_reg_set): Check mode of
pseudo register push.
2020-12-06 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96232
* tree-ssa-phiopt.c (two_value_replacement): Optimize even boolean lhs
cases as long as arg0 has wider precision and conditional_replacement
doesn't handle that case.
(tree_ssa_phiopt_worker): Don't call two_value_replacement during
early phiopt.
2020-12-06 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96232
* match.pd (-(type)!A -> (type)A - 1): New optimization.
2020-12-05 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
David Edelsohn <dje.gcc@gmail.com>
* config/rs6000/xcoff.h (ASM_OUTPUT_DEF): Reference macro arguments.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
PR target/95294
* config/vax/elf.h (REGISTER_NAMES): Append `%psl'.
* config/vax/vax-modes.def (CCN, CCNZ, CCZ): New modes.
* config/vax/vax-protos.h (vax_select_cc_mode): New prototype.
(vax_maybe_split_dimode_move): Likewise.
(vax_notice_update_cc): Remove prototype.
* config/vax/vax.c (TARGET_FLAGS_REGNUM): New macro.
(TARGET_CC_MODES_COMPATIBLE): Likewise.
(TARGET_MD_ASM_ADJUST): Likewise.
(vax_select_cc_mode): New function
(vax_cc_modes_compatible): Likewise.
(vax_md_asm_adjust): Likewise.
(vax_notice_update_cc): Remove function.
(vax_output_int_move): Factor out code checking if a DImode move
may have to be split...
(vax_maybe_split_dimode_move): ... into this new function.
* config/vax/vax.h (FIRST_PSEUDO_REGISTER): Bump up.
(FIXED_REGISTERS): Append an entry for PSL.
(CALL_USED_REGISTERS): Likewise.
(NOTICE_UPDATE_CC, OUTPUT_JUMP): Remove macros.
(SELECT_CC_MODE): New macro.
(REGISTER_NAMES): Append `psl'.
* config/vax/predicates.md (const_zero_operand)
(vax_cc_comparison_operator, vax_ccn_comparison_operator)
(vax_ccnz_comparison_operator, vax_ccz_comparison_operator):
New predicates.
* config/vax/builtins.md: Rewrite for MODE_CC representation.
* config/vax/vax.md: Likewise.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/elf.h (VAX_CC1_SPEC, VAX_CC1PLUS_SPEC): New macros.
* config/vax/netbsd-elf.h (CC1_SPEC): Use VAX_CC1_SPEC rather
than VAX_CC1_AND_CC1PLUS_SPEC.
(CC1PLUS_SPEC): Use VAX_CC1PLUS_SPEC rather than
VAX_CC1_AND_CC1PLUS_SPEC.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/pdp11/pdp11.md (fcc_cc, fcc_ccnz): Use
`const_double_zero' to express double zero constant.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* read-rtl.c (rtx_reader::read_rtx_code): Handle syntactic
`const_double_zero' rtx.
* doc/rtl.texi (Constant Expression Types): Document it.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (divmoddisi4, *amulsi4): Make the comment
notation consistent with the rest of the file.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (movti): Fix output predicate. Emit `movo'
rather than `movh'.
(divmoddisi4): Fix output predicates, correct RTL.
(*amulsi4): Name insn. Fix output predicate.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (mulsidi3): Fix the multiplicand predicates.
(*maddsidi4, *maddsidi4_const): Likewise. Name insns.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (*cmpv_2): Name insn.
(*cmpv, *cmpzv, *cmpzv_2): Likewise. Fix location predicate and
constraint.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (extv): Rename insn to...
(*extv): ... this.
(extv): New expander.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (*insv_aligned, *extzv_aligned)
(*extv_aligned): Also make sure the memory address of a bit-field
location can be adjusted in the PIC mode.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (*insv_aligned, *extzv_aligned)
(*extv_aligned): Reject register bit-field locations that are not
aligned to the least significant bit; update output statement
accordingly.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (*insv_aligned, *extzv_aligned)
(*extv_aligned, *extv_non_const, *extzv_non_const): Name insns.
Fix location predicate.
(*extzv): Name insn.
(*insv): Likewise. Fix location constraint.
(*insv_2): Likewise, and the predicate.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md (cpymemhi1): Rename insn to...
(movmemhi1): ... this.
(cpymemhi): Update accordingly. Remove constraints.
(movmemhi): New expander.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md: Add a peephole2 for QImode and HImode
`ctz' operations.
(any_extend): New code iterator.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (width): New mode attribute.
(ffssi2): Rework expander into...
(ffs<mode>2): ... this.
(ctzsi2): Rework insn into...
(ctz<mode>2): ... this.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (ffssi2_internal): Rename insn to...
(ctzsi2): ... this. Update the RTL operation.
(ffssi2): Update accordingly.
* config/vax/vax.c (vax_notice_update_cc): Handle CTZ.
* config/vax/vax.h (CTZ_DEFINED_VALUE_AT_ZERO): New macro.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.md: Include `builtins.md'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/predicates.md (volatile_mem_operand)
(any_memory_operand): New predicates.
* config/vax/builtins.md (VUNSPEC_UNLOCK): Remove constant.
(sync_lock_test_and_set<mode>): Remove `set' and `unspec'
operations, match operands only. Reformat.
(sync_lock_release<mode>): Likewise. Remove cruft.
(jbb<ccss>i<mode>): Wrap into `unspec_volatile', use
`any_memory_operand' predicate.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (bit): New int iterator.
(ccss): New int attribute.
(jbbssi<mode>, jbbcci<mode>): Fold insns into...
(jbb<ccss>i<mode>): ... this.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (bb_mem): New mode attribute.
(jbbssiqi, jbbssihi, jbbssisi): Fold insns into...
(jbbssi<mode>): ... this.
(jbbcciqi, jbbccihi, jbbccisi): Likewise...
(jbbcci<mode>): ... this.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* jump.c (pc_set): Also accept a jump wrapped in UNSPEC or
UNSPEC_VOLATILE.
(any_uncondjump_p, any_condjump_p): Update comment accordingly.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* loop-doloop.c (add_test): Only remove the jump if `onlyjump_p'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* cfgrtl.c (rtl_block_empty_p): Return false if `!onlyjump_p'
too.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* sel-sched-ir.c (maybe_tidy_empty_bb): Only try to remove a
conditional jump if `onlyjump_p'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* loop-iv.c (simplify_using_initial_values): Only process jumps
that match `onlyjump_p'.
(check_simple_exit): Likewise.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* ifcvt.c (dead_or_predicable) [!IFCVT_MODIFY_TESTS]: Bail out
if `!onlyjump_p'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* read-rtl.c: Add a page-feed separator at the start of iterator
code.
(struct iterator_group): Change the return type to HOST_WIDE_INT
for the `find_builtin' member. Likewise the second parameter
type for the `apply_iterator' member.
(atoll) [!HAVE_ATOQ]: Reorder.
(find_mode, find_code): Change the return type to HOST_WIDE_INT.
(apply_mode_iterator, apply_code_iterator)
(apply_subst_iterator): Change the second parameter type to
HOST_WIDE_INT.
(find_int): Handle input suitable for HOST_WIDE_INT output.
(apply_int_iterator): Rewrite in terms of explicit format
interpretation.
(rtx_reader::read_rtx_operand) <'w'>: Fold into...
<'i', 'n', 'p'>: ... this.
* doc/md.texi (Int Iterators): Document 'w' rtx format support.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/builtins.md (ffssi2): Make preparation statements
actually buildable.
(ffssi2_internal): Fix input constraints; make the RTL pattern
match reality for `cc0'.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_address_cost): Express the cost in terms
of COSTS_N_INSNS.
(vax_rtx_costs): Likewise.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/constraints.md (A): New constraint.
* config/vax/predicates.md (external_symbolic_operand)
(external_const_operand): Remove predicates.
(local_symbolic_operand): Rename to...
(pic_symbolic_operand): ... this, and rework.
(external_memory_operand): Rename to...
(non_pic_external_memory_operand): ... this, and rework.
(illegal_blk_memory_operand, illegal_addsub_di_memory_operand):
Update accordingly.
* config/vax/vax-protos.h (vax_acceptable_pic_operand_p): New
prototype.
* config/vax/vax.c (vax_acceptable_pic_operand_p): New function.
(vax_output_int_add): Update according to predicate rework.
* config/vax/vax.h (LEGITIMATE_PIC_OPERAND_P): New macro.
* config/vax/vax.md (pushlclsymreg, pushextsymreg): Fold
together, and rename to...
(*pushsymreg): ... this. Use the `pic_symbolic_operand'
predicate and the `A' constraint for the displacement operand.
(movlclsymreg, movextsymreg): Fold together, and rename to...
(*movsymreg): ... this. Use the `pic_symbolic_operand'
predicate and the `A' constraint for the displacement operand.
(pushextsym, pushlclsym): Fold together, and rename to...
(*pushsym): ... this. Use the `pic_symbolic_operand' predicate
and the `A' constraint for the displacement operand.
(movextsym, movlclsym): Fold together, and rename to...
(*movsym): ... this. Use the `pic_symbolic_operand' predicate
and the `A' constraint for the displacement operand.
2020-12-05 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (print_operand): Replace `c' and `C' with
`k' and `K' respectively.
* config/vax/vax.md (*branch, *branch_reversed): Update
accordingly.
2020-12-05 Matt Thomas <matt@3am-software.com>
Maciej W. Rozycki <macro@linux-mips.org>
PR target/58901
* reload.c (push_reload): Also reload the inner expression of a
SUBREG for pseudos associated with a mode-dependent memory
reference.
(find_reloads): Force a reload likewise.
2020-12-05 Roman Zhuykov <zhroma@ispras.ru>
PR rtl-optimization/97421
* modulo-sched.c (generate_prolog_epilog): Remove forward
declaration, adjust last argument name and type.
(const_iteration_count): Add bool pointer parameter to return
whether count register is read in pre-header after its
initialization.
(sms_schedule): Fix count register initialization adjustment
procedure according to what const_iteration_count said.
2020-12-05 Iain Sandoe <iain@sandoe.co.uk>
PR target/97865
* configure: Regenerate.
2020-12-05 Venkataramanan Kumar <Venkataramanan.Kumar@amd.com>
Sharavan Kumar <Shravan.Kumar@amd.com>
* common/config/i386/cpuinfo.h (get_amd_cpu) recognize znver3.
* common/config/i386/i386-common.c (processor_names): Add
znver3.
(processor_alias_table): Add znver3 and AMDFAM19H entry.
* common/config/i386/i386-cpuinfo.h (processor_types): Add
AMDFAM19H.
(processor_subtypes): AMDFAM19H_ZNVER3.
* config.gcc (i[34567]86-*-linux* | ...): Likewise.
* config/i386/driver-i386.c: (host_detect_local_cpu): Let
-march=native recognize znver3 processors.
* config/i386/i386-c.c (ix86_target_macros_internal): Add
znver3.
* config/i386/i386-options.c (m_znver3): New definition.
(m_ZNVER): Include m_znver3.
(processor_cost_table): Add znver3.
* config/i386/i386.c (ix86_reassociation_width): Likewise.
* config/i386/i386.h (TARGET_znver3): New definition.
(enum processor_type): Add PROCESSOR_ZNVER3.
* config/i386/i386.md (define_attr "cpu"): Add znver3.
* config/i386/x86-tune-sched.c: (ix86_issue_rate): Likewise.
(ix86_adjust_cost): Likewise.
* config/i386/x86-tune.def (X86_TUNE_AVOID_256FMA_CHAINS:
Likewise.
* config/i386/znver1.md: Add new reservations for znver3.
* doc/extend.texi: Add details about znver3.
* doc/invoke.texi: Likewise.
2020-12-05 Jakub Jelinek <jakub@redhat.com>
PR target/96226
* config/i386/i386.md (splitter after *<rotate_insn><mode>3_mask,
splitter after *<rotate_insn><mode>3_mask_1): Drop the masking from
the patterns to split into.
2020-12-04 Jason Merrill <jason@redhat.com>
* vec.h (begin, end): Add overloads for vec*.
* tree.c (build_constructor_from_vec): Remove *.
2020-12-04 David Edelsohn <dje.gcc@gmail.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Change PTR_SIZE to POINTER_SIZE_UNITS.
2020-12-04 Hans-Peter Nilsson <hp@axis.com>
Martin Sebor <msebor@redhat.com>
PR middle-end/94600
* doc/implement-c.texi (Qualifiers implementation): Add blurb
about access to the whole of a volatile aggregate object, only for
same-size as a scalar object.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR c++/98130
* gimple.c (gimple_call_fnspec): Only return ".co " for replaceable
operator delete or ".mC" for replaceable operator new called from
new/delete.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR target/96226
* config/i386/i386.md (splitter after *<rotate_insn><mode>3_mask,
splitter after *<rotate_insn><mode>3_mask_1): New combine splitters.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/93121
* fold-const.c (native_encode_initializer): Use build_zero_cst
instead of build_constructor.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
PR target/98100
* cfgexpand.c (expand_gimple_basic_block): For vars with
vector type, use TYPE_MODE rather than DECL_MODE.
2020-12-04 Jakub Jelinek <jakub@redhat.com>
* common.opt (-gdwarf32, -gdwarf64): New options.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Default
dwarf_offset_size to 8 if not overridden from the command line.
* dwarf2out.c: Change all occurrences of DWARF_OFFSET_SIZE to
dwarf_offset_size.
* doc/invoke.texi (-gdwarf32, -gdwarf64): Document.
2020-12-04 Martin Liska <mliska@suse.cz>
* doc/tm.texi: Change argument of the record_gcc_switches
hook and remove SWITCH_TYPE_* enum values.
* dwarf2out.c (gen_producer_string): Move to opts.c and remove
handling of the dwarf_record_gcc_switches option.
(dwarf2out_early_finish): Use moved gen_producer_string
function.
* opts.c (gen_producer_string): New.
* opts.h (gen_producer_string): New.
* target.def: Change type of record_gcc_switches.
* target.h (enum print_switch_type): Remove.
(elf_record_gcc_switches): Change first argument.
* toplev.c (MAX_LINE): Remove.
(print_to_asm_out_file): Likewise.
(print_to_stderr): Likewise.
(print_single_switch): Likewise.
(print_switch_values): Likewise.
(init_asm_output): Use new gen_producer_string function.
(process_options): Likewise.
* varasm.c (elf_record_gcc_switches): Just save the string argument
to the ELF container.
2020-12-04 Eric Botcazou <ebotcazou@adacore.com>
* ipa-sra.c (verify_access_tree_1): Relax assertion on the size.
2020-12-04 Martin Liska <mliska@suse.cz>
* doc/invoke.texi: Add missing params.
2020-12-03 Martin Sebor <msebor@redhat.com>
PR c++/90629
PR middle-end/94527
* builtins.c (access_ref::access_ref): Initialize new member.
(compute_objsize): Use access_ref::deref. Handle simple pointer
assignment.
(expand_builtin): Remove handling of the free built-in.
(call_dealloc_argno): Same.
(find_assignment_location): New function.
(fndecl_alloc_p): Same.
(gimple_call_alloc_p): Same.
(call_dealloc_p): Same.
(matching_alloc_calls_p): Same.
(warn_dealloc_offset): Same.
(maybe_emit_free_warning): Same.
* builtins.h (struct access_ref): Declare new member.
(maybe_emit_free_warning): Make extern. Make use of access_ref.
Handle -Wmismatched-new-delete.
* calls.c (initialize_argument_information): Call
maybe_emit_free_warning.
* doc/extend.texi (attribute malloc): Update.
* doc/invoke.texi (-Wfree-nonheap-object): Expand documentation.
(-Wmismatched-new-delete): Document new option.
(-Wmismatched-dealloc): Document new option.
2020-12-03 Alexandre Oliva <oliva@adacore.com>
* tree.c (build_common_builtin_nodes): Declare
__builtin___clear_cache for all languages.
* builtins.c (maybe_emit_call_builtin___clear_cache): Accept
Pmode arguments.
2020-12-03 Sebastian Huber <sebastian.huber@embedded-brains.de>
* config/arm/t-rtems: Add "-mthumb -mcpu=cortex-r52
-mfloat-abi=hard" multilib.
2020-12-03 Uroš Bizjak <ubizjak@gmail.com>
Jakub Jelinek <jakub@redhat.com>
PR target/98086
* config/i386/i386.c (ix86_md_asm_adjustmd): Rewrite
zero-extension part to use convert_to_mode.
2020-12-03 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/s390.md ("@probe_stack2<mode>"): Change mode
iterator to W.
2020-12-03 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64-sve-builtins-base.cc (svundef_impl::fold):
Delete.
2020-12-03 Eric Botcazou <ebotcazou@adacore.com>
PR middle-end/98099
* expmed.c (flip_storage_order): In the case of a non-integer mode,
sorry out if the integer mode to be used instead is not supported.
2020-12-03 Eric Botcazou <ebotcazou@adacore.com>
PR middle-end/98082
* function.c (use_register_for_decl): Also return true for a result
if cfun->tail_call_marked is true.
2020-12-03 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/93121
* fold-const.h (native_encode_initializer): Add mask argument
defaulted to nullptr.
(find_bitfield_repr_type): Declare.
(native_interpret_aggregate): Declare.
* fold-const.c (find_bitfield_repr_type): New function.
(native_encode_initializer): Add mask argument and support for
filling it. Handle also some bitfields without integral
DECL_BIT_FIELD_REPRESENTATIVE.
(native_interpret_aggregate): New function.
* gimple-fold.h (clear_type_padding_in_mask): Declare.
* gimple-fold.c (struct clear_padding_struct): Add clear_in_mask
member.
(clear_padding_flush): Handle buf->clear_in_mask.
(clear_padding_union): Copy clear_in_mask. Don't error if
buf->clear_in_mask is set.
(clear_padding_type): Don't error if buf->clear_in_mask is set.
(clear_type_padding_in_mask): New function.
(gimple_fold_builtin_clear_padding): Set buf.clear_in_mask to false.
* doc/extend.texi (__builtin_bit_cast): Document.
2020-12-03 Ilya Leoshkevich <iii@linux.ibm.com>
* tree-ssa-threadedge.c (record_temporary_equivalences_from_stmts_at_dest):
Do not allow __builtin_constant_p on a threading path.
2020-12-03 Ilya Leoshkevich <iii@linux.ibm.com>
* tree-ssa-strlen.c (printf_strlen_execute): Avoid division by
0.
2020-12-03 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/multilib-generator (arch_canonicalize): Move
code to arch-canonicalize, and call that script to canonicalize arch
string.
(canonical_order): Move code to arch-canonicalize.
(LONG_EXT_PREFIXES): Ditto.
(IMPLIED_EXT): Ditto.
* config/riscv/arch-canonicalize: New.
* config.gcc (riscv*-*-*): Canonicalize --with-arch.
2020-12-03 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/aarch64/aarch64-option-extensions.def
(AARCH64_OPT_EXTENSION): New +flagm option in -march for AArch64.
* config/aarch64/aarch64.h (AARCH64_FL_FLAGM): Add new flagm extension bit
mask.
(AARCH64_FL_FOR_ARCH8_4): Add flagm to Armv8.4-A.
* doc/invoke.texi: Update docs with +flagm.
2020-12-03 liuhongt <hongtao.liu@intel.com>
PR target/96906
* config/i386/sse.md
(<avx512>_ucmp<mode>3<mask_scalar_merge_name>): Add a new
define_split after this insn.
2020-12-03 liuhongt <hongtao.liu@intel.com>
PR target/97642
* config/i386/i386-expand.c
(ix86_expand_special_args_builtin): Don't move all-ones mask
operands into register.
* config/i386/sse.md (UNSPEC_MASKLOAD): New unspec.
(*<avx512>_load<mode>_mask): New define_insns for masked load
instructions.
(<avx512>_load<mode>_mask): Changed to define_expands which
specifically handle memory or all-ones mask operands.
(<avx512>_blendm<mode>): Changed to define_insns which are same
as original <avx512>_load<mode>_mask with adjustment of
operands order.
(*<avx512>_load<mode>): New define_insn_and_split which is
used to optimize for masked load with all one mask.
2020-12-03 Hongyu Wang <hongyu.wang@intel.com>
PR target/97770
* config/i386/sse.md (popcount<mode>2): New expander
for SI/DI vector modes.
(popcount<mode>2): Likewise for QI/HI vector modes.
2020-12-03 Alexandre Oliva <oliva@adacore.com>
* builtins.c (default_emit_call_builtin___clear_cache): New.
(maybe_emit_call_builtin___clear_cache): New.
(expand_builtin___clear_cache): Split into the above.
(expand_builtin): Do not issue clear_cache call any more.
* builtins.h (maybe_emit_call_builtin___clear_cache): Declare.
* config/aarch64/aarch64.c (aarch64_trampoline_init): Use
maybe_emit_call_builtin___clear_cache.
* config/arc/arc.c (arc_trampoline_init): Likewise.
* config/arm/arm.c (arm_trampoline_init): Likewise.
* config/c6x/c6x.c (c6x_initialize_trampoline): Likewise.
* config/csky/csky.c (csky_trampoline_init): Likewise.
* config/m68k/linux.h (FInALIZE_TRAMPOLINE): Likewise.
* config/tilegx/tilegx.c (tilegx_trampoline_init): Likewise.
* config/tilepro/tilepro.c (tilepro_trampoline_init): Ditto.
* config/vxworks.c: Include rtl.h, memmodel.h, and optabs.h.
(vxworks_emit_call_builtin___clear_cache): New.
* config/vxworks.h (CLEAR_INSN_CACHE): Drop.
(TARGET_EMIT_CALL_BUILTIN___CLEAR_CACHE): Define.
* target.def (trampoline_init): In the documentation, refer to
maybe_emit_call_builtin___clear_cache.
(emit_call_builtin___clear_cache): New.
* doc/tm.texi.in: Add new hook point.
(CLEAR_CACHE_INSN): Remove duplicate 'both'.
* doc/tm.texi: Rebuilt.
* targhooks.h (default_meit_call_builtin___clear_cache):
Declare.
* tree.h (BUILTIN_ASM_NAME_PTR): New.
2020-12-03 Ilya Leoshkevich <iii@linux.ibm.com>
* tree-ssa-threadbackward.c (thread_jumps::profitable_jump_thread_path):
Do not allow __builtin_constant_p on a threading path.
2020-12-02 Jakub Jelinek <jakub@redhat.com>
* dwarf2out.c (add_scalar_info): Only use add_AT_wide for 128-bit
constants and only in dwarf-5 or later, where DW_FORM_data16 is
available. Otherwise use DW_FORM_block*/DW_FORM_exprloc with
DW_OP_implicit_value to describe the constant.
2020-12-02 qing zhao <qinzhao@gcc.gnu.org>
PR rtl-optimization/97777
* reg-stack.c (rest_of_handle_stack_regs): call
df_insn_rescan_all if reg_to_stack return true.
2020-12-02 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/s390-protos.h (s390_const_int_pool_entry_p): New
function.
* config/s390/s390.c (s390_const_int_pool_entry_p): New
function.
* config/s390/s390.md: Add define_peephole2 that produces llihf
and oilf.
2020-12-02 Richard Biener <rguenther@suse.de>
PR tree-optimization/97630
* tree-vectorizer.h (_slp_tree::next_node,
_slp_tree::prev_node): New.
(vect_slp_init): Declare.
(vect_slp_fini): Likewise.
* tree-vectorizer.c (vectorize_loops): Call vect_slp_init/fini.
(pass_slp_vectorize::execute): Likewise.
* tree-vect-slp.c (vect_slp_init): New.
(vect_slp_fini): Likewise.
(slp_first_node): New global.
(_slp_tree::_slp_tree): Link node into the SLP tree list.
(_slp_tree::~_slp_tree): Delink node from the SLP tree list.
2020-12-02 Scott Snyder <sss@li-snyder.org>
PR plugins/98059
* vec.h (auto_delete_vec): Use
DISABLE_COPY_AND_ASSIGN(auto_delete_vec) instead of
DISABLE_COPY_AND_ASSIGN(auto_delete_vec<T>) to make it valid C++20
after DR2237.
2020-12-02 Martin Liska <mliska@suse.cz>
PR ipa/98075
* cgraph.c (cgraph_node::dump): Dump decl_is_malloc flag.
* ipa-pure-const.c (propagate_malloc): Do not set malloc
attribute for void functions.
2020-12-02 H.J. Lu <hjl.tools@gmail.com>
PR middle-end/93195
PR middle-end/93197
* configure.ac (HAVE_GAS_SECTION_LINK_ORDER): New. Define 1 if
the assembler supports the section flag 'o' for specifying
section with link-order.
* output.h (SECTION_LINK_ORDER): New. Defined to 0x8000000.
(SECTION_MACH_DEP): Changed from 0x8000000 to 0x10000000.
* targhooks.c (default_print_patchable_function_entry): Pass
SECTION_LINK_ORDER to switch_to_section if the section flag 'o'
works. Pass current_function_decl to switch_to_section.
* varasm.c (default_elf_asm_named_section): Use 'o' flag for
SECTION_LINK_ORDER if assembler supports it.
* config.in: Regenerated.
* configure: Likewise.
* doc/sourcebuild.texi: Document o_flag_in_section.
2020-12-02 H.J. Lu <hjl.tools@gmail.com>
* config/i386/i386.opt: Add the missing '.' for -mneeded.
2020-12-02 Richard Biener <rguenther@suse.de>
* tree-vect-loop.c (vect_transform_loop_stmt): Return whether
we vectorized a stmt.
(vect_transform_loop): Only call maybe_set_vectorized_backedge_value
when we vectorized the stmt.
2020-12-02 Jakub Jelinek <jakub@redhat.com>
* expmed.h (expand_divmod): Only declare if GCC_OPTABS_H is defined.
Add enum optabs_method argument defaulted to OPTAB_LIB_WIDEN.
* expmed.c: Include expmed.h after optabs.h.
(expand_divmod): Add methods argument, if it is not OPTAB_{,LIB_}WIDEN,
don't choose a wider mode, and pass it to other calls instead of
hardcoded OPTAB_LIB_WIDEN. Avoid emitting libcalls if not
OPTAB_LIB or OPTAB_LIB_WIDEN.
* optabs.c: Include expmed.h after optabs.h.
(expand_doubleword_mod, expand_doubleword_divmod): Pass OPTAB_DIRECT
as last argument to expand_divmod.
(expand_binop): Punt if {s,u}divmod_optab has handler for double-word
int_mode.
* expr.c: Include expmed.h after optabs.h.
* explow.c: Include expmed.h after optabs.h.
2020-12-02 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97459
* optabs.h (expand_doubleword_divmod): Declare.
* optabs.c (expand_doubleword_divmod): New function.
(expand_binop): Use it.
* internal-fn.c (expand_DIVMOD): Likewise.
2020-12-02 Martin Liska <mliska@suse.cz>
PR c/98087
* gimple-fold.c (clear_padding_type): Do not divide by zero.
2020-12-02 Martin Liska <mliska@suse.cz>
* gdbinit.in: Write what each command calls
for a debugging function.
2020-12-02 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Use OPTION_MASK_DIRECT_MOVE for Power8 target_enable instead
of OPTION_MASK_HTM.
* config/rs6000/rs6000-cpus.def (ISA_2_7_MASKS_SERVER):
Remove OPTION_MASK_HTM.
(RS6000_CPU): Add OPTION_MASK_HTM to power8, power9 and
powerpc64le entries.
2020-12-02 Uroš Bizjak <ubizjak@gmail.com>
PR target/98079
* config/i386/i386.md (abs<mode>2): Enable QImode
only for !TARGET_PARTIAL_REG_STALL.
(*abs<mode>2_1): Ditto.
(<maxmin:code><mode>3): Ditto.
(*<maxmin:code><mode>3_1): Ditto.
2020-12-02 Martin Liska <mliska@suse.cz>
* diagnostic.c (diagnostic_report_diagnostic): ICE causes to
terminate compiler immediately, so I guess it should be printed
always.
2020-12-02 Martin Liska <mliska@suse.cz>
PR tree-optimization/88702
* gimple-if-to-switch.cc (pass_if_to_switch::execute):
Require at least 2 BBs.
* gimple-if-to-switch.cc (find_conditions): Require
equal precision for low and high of a range.
2020-12-02 Martin Liska <mliska@suse.cz>
PR tree-optimization/98084
* gimple-if-to-switch.cc (find_conditions): Consider only
integral types.
2020-12-02 Jeff Law <law@redhat.com>
* config/h8300/addsub.md (addqi3_clobber_flags): Rename to
addqi3_flags and annotate with a <cczn> for define_subst.
(addhi3_h8sx_clobber_flags): Likewise.
(subqi3_clobber_flags, sub<mode>3_clobber_flags): Likewise.
(neg<mode2>_clobber_flags): Similarly.
(addsi3_clobber_flags): Similarly. Update last argument to
output_plussi to distinguish when we need flags or do not need
flags.
(addhi3_clobber_flags): Similarly. Twiddle code for cases
+-1, +-2 and +-4.
* config/h8300/h8300.md: Define iterators, mode attributes and
substitutions for use in compare/test elimination.
* config/h8300/jumpcall.md (branch, branch_1): Use H8cc mode
iterator to cover the different modes for the CC register.
(branch_1_false): Likewise.
2020-12-02 Maciej W. Rozycki <macro@linux-mips.org>
* loop-iv.c: Fix a typo, s/bu/by/, in the `iv_analyze_expr'
description in the introduction.
2020-12-02 H.J. Lu <hjl.tools@gmail.com>
* configure.ac (HAVE_GAS_SHF_GNU_RETAIN): New. Define 1 if
the assembler supports marking sections with SHF_GNU_RETAIN flag.
* output.h (SECTION_RETAIN): New. Defined as 0x4000000.
(SECTION_MACH_DEP): Changed from 0x4000000 to 0x8000000.
(default_unique_section): Add a bool argument.
* varasm.c (get_section): Set SECTION_RETAIN for the preserved
symbol with HAVE_GAS_SHF_GNU_RETAIN.
(resolve_unique_section): Used named section for the preserved
symbol if assembler supports SHF_GNU_RETAIN.
(get_variable_section): Handle the preserved common symbol with
HAVE_GAS_SHF_GNU_RETAIN.
(default_elf_asm_named_section): Require the full declaration and
use the 'R' flag for SECTION_RETAIN.
* config.in: Regenerated.
* configure: Likewise.
* doc/sourcebuild.texi: Document R_flag_in_section.
2020-12-02 H.J. Lu <hjl.tools@gmail.com>
* config.gcc: Replace cet.o with gnu-property.o. Replace
i386/t-cet with i386/t-gnu-property.
* config/i386/cet.c: Renamed to ...
* config/i386/gnu-property.c: This.
(emit_gnu_property): New function.
(file_end_indicate_exec_stack_and_cet): Renamed to ...
(file_end_indicate_exec_stack_and_gnu_property): This. Call
emit_gnu_property to generate GNU_PROPERTY_X86_FEATURE_1_AND and
GNU_PROPERTY_X86_ISA_1_NEEDED properties.
* config/i386/i386.opt (mneeded): New.
* config/i386/linux-common.h (file_end_indicate_exec_stack_and_cet):
Renamed to ...
(file_end_indicate_exec_stack_and_gnu_property): This.
(TARGET_ASM_FILE_END): Updated.
* config/i386/t-cet: Renamed to ...
* config/i386/t-gnu-property: This.
(cet.o): Renamed to ...
(gnu-property.o): This.
* doc/invoke.texi: Document -mneeded.
2020-12-01 Eugene Rozenfeld <Eugene.Rozenfeld@microsoft.com>
PR tree-optimization/96708
* match.pd: New pattern for comparing X with MAX (X, Y)
or MIN (X, y).
2020-12-01 Jeff Law <law@redhat.com>
* config/mcore/t-mcore (MULTILIB_EXCEPTIONS): Define.
2020-12-01 Martin Sebor <msebor@redhat.com>
PR middle-end/97595
* tree.c (component_ref_size): Fail when DECL_SIZE != TYPE_SIZE.
* tree.h (DECL_SIZE, TYPE_SIZE): Update comment.
2020-12-01 JeanHeyd Meneide <phdofthehouse@gmail.com>
* doc/cpp.texi: Document new macros.
2020-12-01 Martin Sebor <msebor@redhat.com>
PR middle-end/97373
* builtins.c (compute_objsize): Rename...
(compute_objsize_r): to this. Change order and types of arguments.
Use new argument. Adjust calls to self.
(access_ref::get_ref): New member function.
(pointer_query::pointer_query): New member function.
(pointer_query::get_ref): Same.
(pointer_query::put_ref): Same.
(handle_min_max_size): Change order and types of arguments.
(maybe_emit_free_warning): Add a test.
* builtins.h (class pointer_query): New class.
(compute_objsize): Declare an overload.
* gimple-ssa-sprintf.c (get_destination_size): Add argument.
(handle_printf_call): Change argument type.
* tree-ssa-strlen.c (adjust_last_stmt): Add an argument and use it.
(maybe_warn_overflow): Same.
(handle_builtin_strcpy): Same.
(maybe_diag_stxncpy_trunc): Same.
(handle_builtin_memcpy): Change argument type. Adjust calls.
(handle_builtin_strcat): Same.
(handle_builtin_memset): Same.
(handle_store): Same.
(strlen_check_and_optimize_call): Same.
(check_and_optimize_stmt): Same.
(strlen_dom_walker): Add new data members.
(strlen_dom_walker::before_dom_children): Use new member.
(printf_strlen_execute): Dump cache performance counters. Remove
objsize pass cleanup.
* tree-ssa-strlen.h (maybe_diag_stxncpy_trunc): Add argument.
(handle_printf_call): Change argument type.
2020-12-01 Eric Botcazou <ebotcazou@adacore.com>
* function.c (gen_call_used_regs_seq): In a function subject to the
leaf register optimization, skip registers that are not present.
* config/sparc/sparc.c (TARGET_ZERO_CALL_USED_REGS): Define to...
(sparc_zero_call_used_regs): ...this. New function.
2020-12-01 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.h: Remove unused 'X' specs in the link spec
rather than driver self-specs.
2020-12-01 Nathan Sidwell <nathan@acm.org>
* params.opt (lazy-modules): New.
* timevar.def (TV_MODULE_IMPORT, TV_MODULE_EXPORT)
(TV_MODULE_MAPPER): New.
2020-12-01 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97459
* optabs.c (expand_doubleword_mod): Punt early for even op1.
(expand_binop): Don't require lshr_optab double-word handler.
2020-12-01 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97954
* loop-invariant.c (find_invariant_insn): Punt on JUMP_P insns.
2020-12-01 Iain Sandoe <iain@sandoe.co.uk>
* configure.ac (check leb128 support): Check that assemblers both
accept the LEB128 directives and also give the expected output.
Add a test for uleb128 with the MSB set for a 64 bit value.
* configure: Regenerated.
2020-12-01 Iain Sandoe <iain@sandoe.co.uk>
* configure: Regnerated.
2020-12-01 Ilya Leoshkevich <iii@linux.ibm.com>
* optabs-tree.c (vec_cmp_icode_p): New function.
(vec_cmp_eq_icode_p): New function.
(expand_vec_cmp_expr_p): Use vec_cmp_icode_p and
vec_cmp_eq_icode_p.
(vcond_icode_p): Use get_rtx_code_1, just to be uniform with
vec_cmp_icode_p.
* optabs.c (unsigned_optab_p): New function.
(insn_predicate_matches_p): New function.
(can_vec_cmp_compare_p): New function.
(can_vcond_compare_p): Use unsigned_optab_p and
insn_predicate_matches_p.
(get_rtx_code): Use get_rtx_code_1.
(get_rtx_code_1): Version of get_rtx_code that returns UNKNOWN
instead of asserting.
* optabs.h (can_vec_cmp_compare_p): New function.
(get_rtx_code_1): New function.
2020-12-01 Martin Liska <mliska@suse.cz>
PR tree-optimization/14799
PR ipa/88702
* Makefile.in: Add gimple-if-to-switch.o.
* dbgcnt.def (DEBUG_COUNTER): Add new debug counter.
* passes.def: Include new pass_if_to_switch pass.
* timevar.def (TV_TREE_IF_TO_SWITCH): New timevar.
* tree-pass.h (make_pass_if_to_switch): New.
* tree-ssa-reassoc.c (struct operand_entry): Move to the header.
(dump_range_entry): Move to header file.
(debug_range_entry): Likewise.
(no_side_effect_bb): Make it global.
* tree-switch-conversion.h (simple_cluster::simple_cluster):
Add inline for couple of functions in order to prevent error
about multiple defined symbols.
* gimple-if-to-switch.cc: New file.
* tree-ssa-reassoc.h: New file.
2020-12-01 Marius Hillenbrand <mhillen@linux.ibm.com>
* configure.ac: Add configure option
--enable-s390-excess-float-precision and check to derive default
from glibc.
* config/s390/s390.c: Guard s390_excess_precision with an ifdef
for ENABLE_S390_EXCESS_FLOAT_PRECISION.
* doc/install.texi: Document --enable-s390-excess-float-precision.
* configure: Regenerate.
* config.in: Regenerate.
2020-12-01 Martin Liska <mliska@suse.cz>
PR ipa/98057
* symtab.c (symtab_node::set_section_for_node): Drop
implicit_section if x_section is NULL.
2020-12-01 Jakub Jelinek <jakub@redhat.com>
PR target/98063
* config/i386/i386-expand.c (ix86_expand_call): Handle non-plt
CM_LARGE_PIC calls.
2020-12-01 Richard Biener <rguenther@suse.de>
PR middle-end/98070
* builtins.c (builtin_fnspec): realloc is ".Cw ".
2020-12-01 Jakub Jelinek <jakub@redhat.com>
* dwarf2out.c (gen_compile_unit_die): Treat GNU C++20
like C++14 for -gdwarf-5.
2020-12-01 Jakub Jelinek <jakub@redhat.com>
PR debug/97989
* gcc.c (cpp_unique_options): Add -dD if %:debug-level-gt(2)
rather than g3|ggdb3|gstabs3|gxcoff3|gvms3.
2020-12-01 Kito Cheng <kito.cheng@sifive.com>
* config.gcc (riscv*-*-*): Drop some commited accidentally code.
2020-11-30 Jeff Law <law@redhat.com>
* symtab.c (set_section_for_node): Add function comment.
(set_section_from_node): Likewise.
2020-11-30 David Malcolm <dmalcolm@redhat.com>
* doc/plugins.texi (Plugin callbacks): Add PLUGIN_ANALYZER_INIT.
* plugin.c (register_callback): Likewise.
(invoke_plugin_callbacks_full): Likewise.
* plugin.def (PLUGIN_ANALYZER_INIT): New event.
2020-11-30 Jeff Law <law@redhat.com>
* config/h8300/bitfield.md: Remove "cc" attribute on any
insns where it remained.
* config/h8300/combiner.md: Likewise.
* config/h8300/jumpcall.md: Likewise.
* config/h8300/logical.md: Likewise.
* config/h8300/testcompare.md: Likewise.
* config/h8300/h8300.md (old_cc attr): Renamed from cc attr.
* config/h8300/h8300.c (notice_update_cc): Remove.
(compute_plussi_cc): Change references to CC_* to OLD_CC_.
(compute_logical_op_cc): Likewise.
(shift_one, shift_two): Likewise.
(compute_a_shift_cc): Likewise.
(get_shift_alg): Likewise.
(struct shift_insn): Change type of cc_valid field.
(struct shift_info): Likewise.
* config/h8300/save.md: Remove accidentially created file.
2020-11-30 Richard Sandiford <richard.sandiford@arm.com>
PR rtl-optimization/98037
* dse.c (find_shift_sequence): Iterate over all integers and
skip modes that are too small.
2020-11-30 Eugene Rozenfeld <Eugene.Rozenfeld@microsoft.com>
PR tree-optimization/96679
* match.pd (((b | c) & a) | b -> (a & c) | b): New pattern.
2020-11-30 Martin Liska <mliska@suse.cz>
* passes.c (emergency_dump_function): Dump symtab when
we are in an IPA pass.
2020-11-30 Richard Biener <rguenther@suse.de>
PR tree-optimization/98064
* tree-vect-loop.c (vectorizable_live_operation): Avoid
breaking LC SSA for BB vectorization.
2020-11-30 Jonathan Wakely <jwakely@redhat.com>
* doc/sourcebuild.texi (Directives): Fix description of
dg-require-effective-target to include "target" in selector.
2020-11-30 Richard Biener <rguenther@suse.de>
PR tree-optimization/98048
* tree-vect-generic.c (expand_vector_operations_1): Use the
correct type for the scalar LHS replacement.
2020-11-30 Martin Liska <mliska@suse.cz>
PR tree-optimization/98066
* gimple-isel.cc (gimple_expand_vec_exprs): Return when
gimple_expand_vec_exprs replaces last stmt.
2020-11-30 Ilya Leoshkevich <iii@linux.ibm.com>
* cfgrtl.c (rtl_bb_info_initialized_p): New function.
(rtl_dump_bb): Use rtl_bb_info_initialized_p before accessing bb
insns.
2020-11-30 Iain Buclaw <ibuclaw@gdcproject.org>
PR d/87818
* config.gcc (*-*-freebsd*): Add freebsd-d.o and t-freebsd.
* config/freebsd-d.c: New file.
* config/t-freebsd: New file.
2020-11-30 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97459
* internal-fn.h (expand_addsub_overflow): Declare.
* internal-fn.c (expand_addsub_overflow): No longer static.
* optabs.c (expand_doubleword_mod): New function.
(expand_binop): Optimize double-word mod with constant divisor.
2020-11-30 Kito Cheng <kito.cheng@sifive.com>
* config.gcc (riscv*-*-*): Add TARGET_RISCV_DEFAULT_ABI and
TARGET_RISCV_DEFAULT_ARCH to tm_defines.
Remove including riscv/withmultilib.h for --with-multilib-list.
* config/riscv/riscv.h (STRINGIZING): New.
(__STRINGIZING): Ditto.
(MULTILIB_DEFAULTS): Ditto.
* config/riscv/withmultilib.h: Remove.
2020-11-30 Kito Cheng <kito.cheng@sifive.com>
* gcc.c (print_multilib_info): Check default arguments not
appeared in multi-lib option list with '!'
2020-11-30 Jeff Law <law@redhat.com>
* config/ft32/ft32.md (umulsidi3): Do not allow constants as
arguments.
2020-11-29 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (ipa_merge_modref_summary_after_inlining): Fix
handling of ignore_stores.
2020-11-29 Jan Hubicka <jh@suse.cz>
PR jit/97867
* symtab-thunks.h (thunk_info::release): Use ggc_delete.
2020-11-29 Martin Sebor <msebor@redhat.com>
PR middle-end/92936
PR middle-end/92940
PR middle-end/89428
* builtins.c (access_ref::access_ref): Initialize member.
(access_ref::phi): New function.
(access_ref::get_ref): New function.
(access_ref::add_offset): Remove duplicate assignment.
(maybe_warn_for_bound): Add "maybe" kind of warning messages.
(warn_for_access): Same.
(inform_access): Rename...
(access_ref::inform_access): ...to this. Print PHI arguments. Format
offset the same as size and simplify. Improve printing of allocation
functions and VLAs.
(check_access): Adjust to the above.
(gimple_parm_array_size): Change argument.
(handle_min_max_size): New function.
* builtins.h (class ssa_name_limit_t): Move class here from
tree-ssa-strlen.c.
(struct access_ref): Declare new members.
(gimple_parm_array_size): Change argument.
* tree-ssa-strlen.c (maybe_warn_overflow): Use access_ref and simplify.
(handle_builtin_memcpy): Correct argument passed to maybe_warn_overflow.
(handle_builtin_memset): Same.
(class ssa_name_limit_t): Move class to builtins.{h,c}.
2020-11-29 Iain Buclaw <ibuclaw@gdcproject.org>
* config.gcc (*-*-darwin*): Set d_target_objs and target_has_targetdm.
* config/elfos.h (TARGET_D_MINFO_SECTION): New macro.
(TARGET_D_MINFO_START_NAME): New macro.
(TARGET_D_MINFO_END_NAME): New macro.
* config/t-darwin: Add darwin-d.o.
* doc/tm.texi: Regenerate.
* doc/tm.texi.in (D language and ABI): Add @hook for
TARGET_D_MINFO_SECTION, TARGET_D_MINFO_START_NAME, and
TARGET_D_MINFO_END_NAME.
* config/darwin-d.c: New file.
2020-11-29 Jan Hubicka <jh@suse.cz>
* tree-ssa-structalias.c (handle_pure_call): Skip EAF_UNUSED
parameters.
2020-11-29 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_lattice::merge): Do nothing if F is EAF_UNUSED.
(analyze_parms): Detect unused params.
(modref_merge_call_site_flags): Merge correct EAF_UNUSED.
2020-11-28 Eric Botcazou <ebotcazou@adacore.com>
PR target/97939
* config/sparc/predicates.md (arith_double_add_operand): Comment.
* config/sparc/sparc.md (uaddvdi4): Use arith_double_operand.
(addvdi4): Use arith_double_add_operand.
(addsi3): Remove useless attributes.
(addvsi4): Use arith_add_operand.
(*cmp_ccv_plus): Likewise and add second alternative accordingly.
(*cmp_ccxv_plus): Likewise.
(*cmp_ccv_plus_set): Likewise.
(*cmp_ccxv_plus_set): Likewise.
(*cmp_ccv_plus_sltu_set): Likewise.
(usubvdi4): Use arith_double_operand.
(subvdi4): Use arith_double_add_operand.
(subsi3): Remove useless attributes.
(subvsi4): Use arith_add_operand.
(*cmp_ccv_minus): Likewise and add second alternative accordingly.
(*cmp_ccxv_minus): Likewise.
(*cmp_ccv_minus_set): Likewise.
(*cmp_ccxv_minus_set): Likewise.
(*cmp_ccv_minus_sltu_set): Likewise.
(negsi2): Use register_operand.
(unegvsi3): Likewise.
(negvsi3) Likewise.
(*cmp_ccnz_neg): Likewise.
(*cmp_ccxnz_neg): Likewise.
(*cmp_ccnz_neg_set): Likewise.
(*cmp_ccxnz_neg_set): Likewise.
(*cmp_ccc_neg_set): Likewise.
(*cmp_ccxc_neg_set): Likewise.
(*cmp_ccc_neg_sltu_set): Likewise.
(*cmp_ccv_neg): Likewise.
(*cmp_ccxv_neg): Likewise.
(*cmp_ccv_neg_set): Likewise.
(*cmp_ccxv_neg_set): Likewise.
(*cmp_ccv_neg_sltu_set): Likewise.
2020-11-27 H.J. Lu <hjl.tools@gmail.com>
PR other/98027
* doc/install.texi: Default to --enable-cet=auto.
2020-11-27 Thomas Schwinge <thomas@codesourcery.com>
* omp-oacc-kernels-decompose.cc (flatten_binds): Don't choke on
empty GIMPLE sequence, and examine all statements contained in
inner 'GIMPLE_BIND'.
2020-11-27 Richard Biener <rguenther@suse.de>
PR tree-optimization/98024
* tree-ssa-pre.c (insert): Fix successor RPO order check.
(do_pre_regular_insertion): When inserting an assignment
in place of an all-same-value PHI still record that into
PHI_GEN.
2020-11-27 Jakub Jelinek <jakub@redhat.com>
* tree-ssanames.c (get_range_info): Handle INTEGER_CST by returning
VR_RANGE with both *min and *max set to the wide_int value of the
INTEGER_CST. Return VR_VARYING for non-SSA_NAMEs.
* match.pd ((t * 2) / 2) -> t): Handle also @0 being INTEGER_CST.
Simplify by calling get_range_info on everything.
* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Simplify by calling
get_range_info on everything.
* tree-scalar-evolution.c (iv_can_overflow_p): Likewise.
2020-11-27 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/88101
* gimple-fold.c (clear_padding_type): Ignore fields with is_empty_type
types.
2020-11-27 Tobias Burnus <tobias@codesourcery.com>
PR c/97880
* omp-expand.c (expand_oacc_collapse_init, expand_oacc_collapse_vars):
Use now passed diff_type.
(expand_oacc_for): Take largest type for diff_type, taking tiling
and collapsing into account.
2020-11-27 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/aarch64/aarch64.opt
(-param=aarch64-autovec-preference): Define.
* config/aarch64/aarch64.c (aarch64_override_options_internal):
Set aarch64_sve_compare_costs to 0 when preferring only Advanced
SIMD.
(aarch64_cmp_autovec_modes): Define.
(aarch64_preferred_simd_mode): Adjust to use the above.
(aarch64_autovectorize_vector_modes): Likewise.
* doc/invoke.texi: Document aarch64-autovec-preference param.
2020-11-27 Xionghu Luo <luoxhu@linux.ibm.com>
* config/rs6000/rs6000-call.c (altivec_expand_vec_set_builtin):
Change call param 2 from type int to rtx.
* config/rs6000/rs6000-protos.h (rs6000_expand_vector_set):
Likewise.
* config/rs6000/rs6000.c (rs6000_expand_vector_init):
Change call param 2 from type int to rtx.
(rs6000_expand_vector_set): Likewise.
* config/rs6000/vector.md (vec_set<mode>): Support both constant
and variable index vec_set.
2020-11-27 Haochen Gui <guihaoc@gcc.gnu.org>
* config/rs6000/rs6000-protos.h (rs6000_output_addr_vec_elt): Declare.
* config/rs6000/rs6000.c (TARGET_ASM_GENERATE_PIC_ADDR_DIFF_VEC):
Define.
(rs6000_gen_pic_addr_diff_vec, rs6000_output_addr_vec_elt): Implement.
* config/rs6000/rs6000.h (CASE_VECTOR_PC_RELATIVE,
CASE_VECTOR_MODE, ASM_OUTPUT_ADDR_VEC_ELT): Define.
* config/rs6000/rs6000.md (tablejump<mode>_absolute,
tablejump<mode>_absolute_nospec): New expanders.
* config/rs6000/rs6000.opt (mrelative-jumptables): New.
2020-11-26 Eric Botcazou <ebotcazou@adacore.com>
PR target/96607
* config/sparc/sparc-protos.h (eligible_for_call_delay): Delete.
* config/sparc/sparc.c (eligible_for_call_delay): Likewise.
* config/sparc/sparc.md (in_call_delay): Likewise.
(tls_delay_slot): New attribute.
(define_delay [call]): Use in_branch_delay.
(tgd_call<P:mode>): Set type to call_no_delay_slot when
tls_delay_slot is false.
(tldm_call<P:mode>): Likewise.
2020-11-26 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97997
* match.pd ((t * 2) / 2) -> t): Optimize even for defined
overflow if ranges prove there is no overflow.
2020-11-26 Richard Biener <rguenther@suse.de>
PR tree-optimization/97953
* gimple-ssa-evrp-analyze.c
(evrp_range_analyzer::record_ranges_from_incoming_edge): Make
sure the condition post-dominates the SSA definition before
recording into SSA_NAME_RANGE_INFO.
2020-11-26 Richard Biener <rguenther@suse.de>
* gimple-isel.cc (gimple_expand_vec_cond_expr): Only
lower VECTOR_BOOLEAN_TYPE_P VEC_COND_EXPRs.
2020-11-26 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/mkoffload.c (copy_early_debug_info): Don't wipe
relocation symbols.
2020-11-26 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-expand.c (ix86_expand_multi_arg_builtin):
Remove args array of structs, declare rtx xops array instead.
Update all uses.
(ix86_expand_args_builtin): Ditto.
(ix86_expand_round_builtin): Ditto.
(ix86_expand_special_args_builtin): Ditto.
2020-11-26 Martin Liska <mliska@suse.cz>
* dwarf2out.c (gen_compile_unit_die): Fix missing == 0 in a
strcmp.
2020-11-26 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* config/sol2.h (TIME_LIBRARY): Remove.
2020-11-26 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Set param_vect_partial_vector_usage as 1 for Power10 and up
by default.
2020-11-26 Jakub Jelinek <jakub@redhat.com>
* gimple-fold.c (clear_padding_union): Ignore DECL_PADDING_P
fields.
(clear_padding_type): Ignore DECL_PADDING_P fields, rather than
DECL_BIT_FIELD with NULL DECL_NAME.
2020-11-26 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97979
* match.pd ((X {&,^,|} C2) << C1 into (X << C1) {&,^,|} (C2 << C1)):
Only optimize if int_const_binop returned non-NULL.
2020-11-26 liuhongt <hongtao.liu@intel.com>
* config/i386/i386-expand.c
(ix86_expand_special_args_builtin): Delete last_arg_constant
and match.
2020-11-26 Uroš Bizjak <ubizjak@gmail.com>
PR target/97873
* config/i386/i386.md (abs<mode>2): Use SDWIM mode iterator.
(*abs<mode>2_1): Use SWI mode iterator.
(<maxmin:code><mode>3): Use SDWIM mode iterator.
(*<maxmin:code><mode>3_1): Use SWI mode iterator.
2020-11-26 Jakub Jelinek <jakub@redhat.com>
PR target/96906
* config/i386/sse.md (VI12_AVX2): Remove V64QI/V32HI modes.
(VI12_AVX2_AVX512BW): New mode iterator.
(<sse2_avx2>_<plusminus_insn><mode>3<mask_name>,
uavg<mode>3_ceil, <sse2_avx2>_uavg<mode>3<mask_name>): Use
VI12_AVX2_AVX512BW iterator instead of VI12_AVX2.
(*<sse2_avx2>_<plusminus_insn><mode>3<mask_name>): Likewise.
(*<sse2_avx2>_uavg<mode>3<mask_name>): Likewise.
(*<sse2_avx2>_<plusminus_insn><mode>3<mask_name>): Add a new
define_split after this insn.
2020-11-26 Martin Uecker <muecker@gwdg.de>
PR c/65455
PR c/92935
* ginclude/stdatomic.h: Use comma operator to drop qualifiers.
2020-11-26 Vladimir Makarov <vmakarov@redhat.com>
PR bootstrap/97983
* lra.c (lra_process_new_insns): Use emit_insn_before_noloc or
emit_insn_after_noloc with the destination BB.
2020-11-25 Martin Sebor <msebor@redhat.com>
PR bootstrap/97622
PR bootstrap/94982
* config/i386/i386-options.c (ix86_valid_target_attribute_inner_p):
Avoid -Wformat-diag.
* digraph.cc (struct test_edge): Same.
* dumpfile.c (dump_loc): Same.
(dump_context::begin_scope): Same.
* edit-context.c (edited_file::print_diff): Same.
(edited_file::print_diff_hunk): Same.
* json.cc (object::print): Same.
* lto-wrapper.c (merge_and_complain): Same.
* reload.c (find_reloads): Same.
* tree-diagnostic-path.cc (print_path_summary_as_text): Same.
* ubsan.c (ubsan_type_descriptor): Same.
2020-11-25 Jan Hubicka <jh@suse.cz>
* gimple.c (gimple_call_arg_flags): Also imply EAF_NODIRECTESCAPE.
* tree-core.h (EAF_NODRECTESCAPE): New flag.
* tree-ssa-structalias.c (make_indirect_escape_constraint): New
function.
(handle_rhs_call): Hanlde EAF_NODIRECTESCAPE.
* ipa-modref.c (dump_eaf_flags): Print EAF_NODIRECTESCAPE.
(deref_flags): Dereference is always EAF_NODIRECTESCAPE.
(modref_lattice::init): Also set EAF_NODIRECTESCAPE.
(analyze_ssa_name_flags): Pure functions do not affect
EAF_NODIRECTESCAPE.
(analyze_params): Likewise.
(ipa_merge_modref_summary_after_inlining): Likewise.
(modref_merge_call_site_flags): Likewise.
2020-11-25 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_summaries::duplicate,
modref_summaries_lto::duplicate): Copy arg_flags.
(remap_arg_flags): Fix remapping of arg_flags.
2020-11-25 Martin Sebor <msebor@redhat.com>
PR middle-end/97956
* gimple-fold.c (gimple_fold_builtin_memchr): Use sizetype for pointer
offsets.
2020-11-25 Matthew Malcomson <matthew.malcomson@arm.com>
* asan.c (asan_instrument_reads): New.
(asan_instrument_writes): New.
(asan_memintrin): New.
(handle_builtin_stack_restore): Account for HWASAN.
(handle_builtin_alloca): Account for HWASAN.
(get_mem_refs_of_builtin_call): Special case strlen for HWASAN.
(hwasan_instrument_reads): New.
(hwasan_instrument_writes): New.
(hwasan_memintrin): New.
(report_error_func): Assert not HWASAN.
(build_check_stmt): Make HWASAN_CHECK instead of ASAN_CHECK.
(instrument_derefs): HWASAN does not tag globals.
(instrument_builtin_call): Use new helper functions.
(maybe_instrument_call): Don't instrument `noreturn` functions.
(initialize_sanitizer_builtins): Add new type.
(asan_expand_mark_ifn): Account for HWASAN.
(asan_expand_check_ifn): Assert never called by HWASAN.
(asan_expand_poison_ifn): Account for HWASAN.
(asan_instrument): Branch based on whether using HWASAN or ASAN.
(pass_asan::gate): Return true if sanitizing HWASAN.
(pass_asan_O0::gate): Return true if sanitizing HWASAN.
(hwasan_check_func): New.
(hwasan_expand_check_ifn): New.
(hwasan_expand_mark_ifn): New.
(gate_hwasan): New.
* asan.h (hwasan_expand_check_ifn): New decl.
(hwasan_expand_mark_ifn): New decl.
(gate_hwasan): New decl.
(asan_intercepted_p): Always false for hwasan.
(asan_sanitize_use_after_scope): Account for HWASAN.
* builtin-types.def (BT_FN_PTR_CONST_PTR_UINT8): New.
* gimple-fold.c (gimple_build): New overload for building function
calls without arguments.
(gimple_build_round_up): New.
* gimple-fold.h (gimple_build): New decl.
(gimple_build): New inline function.
(gimple_build_round_up): New decl.
(gimple_build_round_up): New inline function.
* gimple-pretty-print.c (dump_gimple_call_args): Account for
HWASAN.
* gimplify.c (asan_poison_variable): Account for HWASAN.
(gimplify_function_tree): Remove requirement of
SANITIZE_ADDRESS, requiring asan or hwasan is accounted for in
`asan_sanitize_use_after_scope`.
* internal-fn.c (expand_HWASAN_CHECK): New.
(expand_HWASAN_ALLOCA_UNPOISON): New.
(expand_HWASAN_CHOOSE_TAG): New.
(expand_HWASAN_MARK): New.
(expand_HWASAN_SET_TAG): New.
* internal-fn.def (HWASAN_ALLOCA_UNPOISON): New.
(HWASAN_CHOOSE_TAG): New.
(HWASAN_CHECK): New.
(HWASAN_MARK): New.
(HWASAN_SET_TAG): New.
* sanitizer.def (BUILT_IN_HWASAN_LOAD1): New.
(BUILT_IN_HWASAN_LOAD2): New.
(BUILT_IN_HWASAN_LOAD4): New.
(BUILT_IN_HWASAN_LOAD8): New.
(BUILT_IN_HWASAN_LOAD16): New.
(BUILT_IN_HWASAN_LOADN): New.
(BUILT_IN_HWASAN_STORE1): New.
(BUILT_IN_HWASAN_STORE2): New.
(BUILT_IN_HWASAN_STORE4): New.
(BUILT_IN_HWASAN_STORE8): New.
(BUILT_IN_HWASAN_STORE16): New.
(BUILT_IN_HWASAN_STOREN): New.
(BUILT_IN_HWASAN_LOAD1_NOABORT): New.
(BUILT_IN_HWASAN_LOAD2_NOABORT): New.
(BUILT_IN_HWASAN_LOAD4_NOABORT): New.
(BUILT_IN_HWASAN_LOAD8_NOABORT): New.
(BUILT_IN_HWASAN_LOAD16_NOABORT): New.
(BUILT_IN_HWASAN_LOADN_NOABORT): New.
(BUILT_IN_HWASAN_STORE1_NOABORT): New.
(BUILT_IN_HWASAN_STORE2_NOABORT): New.
(BUILT_IN_HWASAN_STORE4_NOABORT): New.
(BUILT_IN_HWASAN_STORE8_NOABORT): New.
(BUILT_IN_HWASAN_STORE16_NOABORT): New.
(BUILT_IN_HWASAN_STOREN_NOABORT): New.
(BUILT_IN_HWASAN_TAG_MISMATCH4): New.
(BUILT_IN_HWASAN_HANDLE_LONGJMP): New.
(BUILT_IN_HWASAN_TAG_PTR): New.
* sanopt.c (sanopt_optimize_walker): Act for hwasan.
(pass_sanopt::execute): Act for hwasan.
* toplev.c (compile_file): Use `gate_hwasan` function.
2020-11-25 Matthew Malcomson <matthew.malcomson@arm.com>
* asan.c (struct hwasan_stack_var): New.
(hwasan_sanitize_p): New.
(hwasan_sanitize_stack_p): New.
(hwasan_sanitize_allocas_p): New.
(initialize_sanitizer_builtins): Define new builtins.
(ATTR_NOTHROW_LIST): New macro.
(hwasan_current_frame_tag): New.
(hwasan_frame_base): New.
(stack_vars_base_reg_p): New.
(hwasan_maybe_init_frame_base_init): New.
(hwasan_record_stack_var): New.
(hwasan_get_frame_extent): New.
(hwasan_increment_frame_tag): New.
(hwasan_record_frame_init): New.
(hwasan_emit_prologue): New.
(hwasan_emit_untag_frame): New.
(hwasan_finish_file): New.
(hwasan_truncate_to_tag_size): New.
* asan.h (hwasan_record_frame_init): New declaration.
(hwasan_record_stack_var): New declaration.
(hwasan_emit_prologue): New declaration.
(hwasan_emit_untag_frame): New declaration.
(hwasan_get_frame_extent): New declaration.
(hwasan_maybe_enit_frame_base_init): New declaration.
(hwasan_frame_base): New declaration.
(stack_vars_base_reg_p): New declaration.
(hwasan_current_frame_tag): New declaration.
(hwasan_increment_frame_tag): New declaration.
(hwasan_truncate_to_tag_size): New declaration.
(hwasan_finish_file): New declaration.
(hwasan_sanitize_p): New declaration.
(hwasan_sanitize_stack_p): New declaration.
(hwasan_sanitize_allocas_p): New declaration.
(HWASAN_TAG_SIZE): New macro.
(HWASAN_TAG_GRANULE_SIZE): New macro.
(HWASAN_STACK_BACKGROUND): New macro.
* builtin-types.def (BT_FN_VOID_PTR_UINT8_PTRMODE): New.
* builtins.def (DEF_SANITIZER_BUILTIN): Enable for HWASAN.
* cfgexpand.c (align_local_variable): When using hwasan ensure
alignment to tag granule.
(align_frame_offset): New.
(expand_one_stack_var_at): For hwasan use tag offset.
(expand_stack_vars): Record stack objects for hwasan.
(expand_one_stack_var_1): Record stack objects for hwasan.
(init_vars_expansion): Initialise hwasan state.
(expand_used_vars): Emit hwasan prologue and generate hwasan epilogue.
(pass_expand::execute): Emit hwasan base initialization if needed.
* doc/tm.texi (TARGET_MEMTAG_TAG_SIZE,TARGET_MEMTAG_GRANULE_SIZE,
TARGET_MEMTAG_INSERT_RANDOM_TAG,TARGET_MEMTAG_ADD_TAG,
TARGET_MEMTAG_SET_TAG,TARGET_MEMTAG_EXTRACT_TAG,
TARGET_MEMTAG_UNTAGGED_POINTER): Document new hooks.
* doc/tm.texi.in (TARGET_MEMTAG_TAG_SIZE,TARGET_MEMTAG_GRANULE_SIZE,
TARGET_MEMTAG_INSERT_RANDOM_TAG,TARGET_MEMTAG_ADD_TAG,
TARGET_MEMTAG_SET_TAG,TARGET_MEMTAG_EXTRACT_TAG,
TARGET_MEMTAG_UNTAGGED_POINTER): Document new hooks.
* explow.c (get_dynamic_stack_base): Take new `base` argument.
* explow.h (get_dynamic_stack_base): Take new `base` argument.
* sanitizer.def (BUILT_IN_HWASAN_INIT): New.
(BUILT_IN_HWASAN_TAG_MEM): New.
* target.def (target_memtag_tag_size,target_memtag_granule_size,
target_memtag_insert_random_tag,target_memtag_add_tag,
target_memtag_set_tag,target_memtag_extract_tag,
target_memtag_untagged_pointer): New hooks.
* targhooks.c (HWASAN_SHIFT): New.
(HWASAN_SHIFT_RTX): New.
(default_memtag_tag_size): New default hook.
(default_memtag_granule_size): New default hook.
(default_memtag_insert_random_tag): New default hook.
(default_memtag_add_tag): New default hook.
(default_memtag_set_tag): New default hook.
(default_memtag_extract_tag): New default hook.
(default_memtag_untagged_pointer): New default hook.
* targhooks.h (default_memtag_tag_size): New default hook.
(default_memtag_granule_size): New default hook.
(default_memtag_insert_random_tag): New default hook.
(default_memtag_add_tag): New default hook.
(default_memtag_set_tag): New default hook.
(default_memtag_extract_tag): New default hook.
(default_memtag_untagged_pointer): New default hook.
* toplev.c (compile_file): Call hwasan_finish_file when finished.
2020-11-25 Matthew Malcomson <matthew.malcomson@arm.com>
* common.opt (flag_sanitize_recover): Default for kernel
hwaddress.
(static-libhwasan): New cli option.
* config/aarch64/aarch64.c (aarch64_can_tag_addresses): New.
(TARGET_MEMTAG_CAN_TAG_ADDRESSES): New.
* config/gnu-user.h (LIBHWASAN_EARLY_SPEC): hwasan equivalent of
asan command line flags.
* cppbuiltin.c (define_builtin_macros_for_compilation_flags):
Add hwasan equivalent of __SANITIZE_ADDRESS__.
* doc/invoke.texi: Document hwasan command line flags.
* doc/tm.texi: Document new hook.
* doc/tm.texi.in: Document new hook.
* flag-types.h (enum sanitize_code): New sanitizer values.
* gcc.c (STATIC_LIBHWASAN_LIBS): New macro.
(LIBHWASAN_SPEC): New macro.
(LIBHWASAN_EARLY_SPEC): New macro.
(SANITIZER_EARLY_SPEC): Update to include hwasan.
(SANITIZER_SPEC): Update to include hwasan.
(sanitize_spec_function): Use hwasan options.
* opts.c (finish_options): Describe conflicts between address
sanitizers.
(find_sanitizer_argument): New.
(report_conflicting_sanitizer_options): New.
(sanitizer_opts): Introduce new sanitizer flags.
(common_handle_option): Add defaults for kernel sanitizer.
* params.opt (hwasan--instrument-stack): New
(hwasan-random-frame-tag): New
(hwasan-instrument-allocas): New
(hwasan-instrument-reads): New
(hwasan-instrument-writes): New
(hwasan-instrument-mem-intrinsics): New
* target.def (HOOK_PREFIX): Add new hook.
(can_tag_addresses): Add new hook under memtag prefix.
* targhooks.c (default_memtag_can_tag_addresses): New.
* targhooks.h (default_memtag_can_tag_addresses): New decl.
* toplev.c (process_options): Ensure hwasan only on
architectures that advertise the possibility.
2020-11-25 Matthew Malcomson <matthew.malcomson@arm.com>
* doc/install.texi: Document new option.
2020-11-25 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64.c (aarch64_maybe_expand_sve_subreg_move):
Do not optimize LRA subregs.
* config/aarch64/aarch64-sve.md
(@aarch64_pred_<SVE_INT_UNARY:optab><mode>): Tie the input to the
output.
(@aarch64_sve_revbhw_<SVE_ALL:mode><PRED_HSD:mode>): Likewise.
(*<ANY_EXTEND:optab><SVE_PARTIAL_I:mode><SVE_HSDI:mode>2): Likewise.
(@aarch64_pred_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Likewise.
(*cnot<mode>): Likewise.
(@aarch64_pred_<SVE_COND_FP_UNARY:optab><mode>): Likewise.
(@aarch64_sve_<optab>_nontrunc<SVE_FULL_F:mode><SVE_FULL_HSDI:mode>):
Likewise.
(@aarch64_sve_<optab>_trunc<VNx2DF_ONLY:mode><VNx4SI_ONLY:mode>):
Likewise.
(@aarch64_sve_<optab>_nonextend<SVE_FULL_HSDI:mode><SVE_FULL_F:mode>):
Likewise.
(@aarch64_sve_<optab>_extend<VNx4SI_ONLY:mode><VNx2DF_ONLY:mode>):
Likewise.
(@aarch64_sve_<optab>_trunc<SVE_FULL_SDF:mode><SVE_FULL_HSF:mode>):
Likewise.
(@aarch64_sve_<optab>_trunc<VNx4SF_ONLY:mode><VNx8BF_ONLY:mode>):
Likewise.
(@aarch64_sve_<optab>_nontrunc<SVE_FULL_HSF:mode><SVE_FULL_SDF:mode>):
Likewise.
* config/aarch64/aarch64-sve2.md
(@aarch64_pred_<SVE2_COND_FP_UNARY_LONG:sve_fp_op><mode>): Likewise.
(@aarch64_pred_<SVE2_COND_FP_UNARY_NARROWB:sve_fp_op><mode>): Likewise.
(@aarch64_pred_<SVE2_U32_UNARY:sve_int_op><mode>): Likewise.
(@aarch64_pred_<SVE2_COND_INT_UNARY_FP:sve_fp_op><mode>): Likewise.
2020-11-25 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/95862
* internal-fn.c (get_min_precision): For narrowing conversion, recurse
on the operand and if the operand precision is smaller than the
current one, return that smaller precision.
(expand_mul_overflow): For s1 * u2 -> ur and s1 * s2 -> ur cases
if the sum of minimum precisions of both operands is smaller or equal
to the result precision, just perform normal multiplication and
set overflow to the sign bit of the multiplication result. For
u1 * u2 -> sr if both arguments have the MSB known zero, use
normal s1 * s2 -> sr expansion.
2020-11-25 Jan Hubicka <jh@suse.cz>
* cfg.c (free_block): New function.
(clear_edges): Rename to ....
(free_cfg): ... this one; also free BBs and vectors.
(expunge_block): Update comment.
* cfg.h (clear_edges): Rename to ...
(free_cfg): ... this one.
* cgraph.c (release_function_body): Use free_cfg.
2020-11-25 Richard Biener <rguenther@suse.de>
PR middle-end/97579
* gimple-isel.cc (gimple_expand_vec_cond_expr): Lower
VECTOR_BOOLEAN_TYPE_P, non-vector mode VEC_COND_EXPRs.
2020-11-25 Jakub Jelinek <jakub@redhat.com>
PR middle-end/97943
* gimple-fold.c (clear_padding_union, clear_padding_type): Error on and
ignore flexible array member fields. Ignore fields with
error_mark_node type.
2020-11-24 Ulrich Weigand <ulrich.weigand@de.ibm.com>
Revert:
2020-11-24 Ulrich Weigand <uweigand@de.ibm.com>
* doc/invoke.texi (-ffast-math): Remove mention of -fno-signaling-nans.
Clarify conditions when __FAST_MATH__ preprocessor macro is defined.
* opts.c (common_handle_option): Pass OPTS_SET to set_fast_math_flags
and set_unsafe_math_optimizations_flags.
(set_fast_math_flags): Add OPTS_SET argument, and use it to avoid
setting flags already explicitly set on the command line. In the !set
case, also reset x_flag_cx_limited_range and x_flag_excess_precision.
Never reset x_flag_signaling_nans or x_flag_rounding_math.
(set_unsafe_math_optimizations_flags): Add OPTS_SET argument, and use
it to avoid setting flags already explicitly set on the command line.
(fast_math_flags_set_p): Also test x_flag_cx_limited_range,
x_flag_associative_math, x_flag_reciprocal_math, and
x_flag_rounding_math.
2020-11-24 Vladimir Makarov <vmakarov@redhat.com>
PR bootstrap/97933
* lra.c (lra_process_new_insns): Stop on the first real insn after
head of e->dest.
2020-11-24 Richard Earnshaw <rearnsha@arm.com>
PR target/97534
* config/arm/arm.c (arm_split_atomic_op): Use gen_int_mode when
negating a const_int.
2020-11-24 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/vector.md: Use vcond_comparison_operator
predicate.
2020-11-24 Ulrich Weigand <uweigand@de.ibm.com>
* doc/invoke.texi (-ffast-math): Remove mention of -fno-signaling-nans.
Clarify conditions when __FAST_MATH__ preprocessor macro is defined.
* opts.c (common_handle_option): Pass OPTS_SET to set_fast_math_flags
and set_unsafe_math_optimizations_flags.
(set_fast_math_flags): Add OPTS_SET argument, and use it to avoid
setting flags already explicitly set on the command line. In the !set
case, also reset x_flag_cx_limited_range and x_flag_excess_precision.
Never reset x_flag_signaling_nans or x_flag_rounding_math.
(set_unsafe_math_optimizations_flags): Add OPTS_SET argument, and use
it to avoid setting flags already explicitly set on the command line.
(fast_math_flags_set_p): Also test x_flag_cx_limited_range,
x_flag_associative_math, x_flag_reciprocal_math, and
x_flag_rounding_math.
2020-11-24 Jakub Jelinek <jakub@redhat.com>
PR target/97950
* config/i386/i386.md (*setcc_si_1_and): Macroize into...
(*setcc_<mode>_1_and): New define_insn_and_split with SWI24 iterator.
(*setcc_si_1_movzbl): Macroize into...
(*setcc_<mode>_1_movzbl): New define_insn_and_split with SWI24
iterator.
2020-11-24 Jakub Jelinek <jakub@redhat.com>
* gimple-fold.c (clear_padding_flush): If a word contains only 0
or 0xff bytes of padding other than all set, all clear, all set
followed by all clear or all clear followed by all set, don't emit
a RMW operation on the whole word or parts of it, but instead
clear the individual bytes of padding. For paddings of one byte
size, don't use char[1] and {}, but instead just char and 0.
2020-11-24 Thomas Schwinge <thomas@codesourcery.com>
* omp-expand.c (expand_oacc_for): More explicit checking of which
OMP constructs we're expecting.
2020-11-24 Thomas Schwinge <thomas@codesourcery.com>
* doc/install.texi (Prerequisites) <Tcl>: Add comment.
2020-11-24 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96929
* fold-const.c (wide_int_binop) <case LSHIFT_EXPR, case RSHIFT_EXPR>:
Return false on negative second argument rather than trying to handle
it as shift in the other direction.
* tree-ssa-ccp.c (bit_value_binop) <case LSHIFT_EXPR,
case RSHIFT_EXPR>: Punt on negative shift count rather than trying
to handle it as shift in the other direction.
* match.pd (-1 >> x to -1): Remove tree_expr_nonnegative_p check.
2020-11-24 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR tree-optimization/97849
* tree-if-conv.c (tree_if_conversion): Move ssa_name
replacement code from ifcvt_local_dce to this function
before calling do_rpo_vn.
2020-11-24 Martin Sebor <msebor@redhat.com>
* tree-cfg.c (dump_function_to_file): Print type attributes
and return type.
2020-11-23 Martin Jambor <mjambor@suse.cz>
* ipa-prop.h (ipa_pass_through_data): Expand comment describing
operation.
* ipa-prop.c (analyze_agg_content_value): Detect new special case and
encode it as ASSERT_EXPR.
* ipa-cp.c (values_equal_for_ipcp_p): Move before
ipa_get_jf_arith_result.
(ipa_get_jf_arith_result): Special case ASSERT_EXPR.
2020-11-23 Jeff Law <law@redhat.com>
* config/h8300/h8300.c (h8300_rtx_costs): Handle the various
comparison rtx codes too.
2020-11-23 Jan Hubicka <jh@suse.cz>
* ipa-prop.c (build_agg_jump_func_from_list,
ipa_read_jump_function): Reserve agg.items precisely.
* ipa-prop.h (ipa_node_params::~ipa_node_params): Release descriptors
(ipa_edge_args::~ipa_edge_args): Release agg.items.
2020-11-23 Jan Hubicka <jh@suse.cz>
* lto-streamer-in.c (input_cfg): Do not init ssa operands.
(input_function): Do not init tree_ssa and set in_ssa_p.
(input_ssa_names): Do it here.
* tree-ssa.c (init_tree_ssa): Add additional SIZE parameter, default
to 0
* tree-ssanames.c (init_ssanames): Do not round size up to 50, allocate
precisely.
* tree-ssa.h (init_tree_ssa): Update prototype.
2020-11-23 Nathan Sidwell <nathan@acm.org>
* diagnostic.c (diagnostic_report_current_module): Adjust for C++
module importation.
2020-11-23 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_section_attr): Don't warn for "lower"
attribute used with "noinit" or "persistent" attributes.
(msp430_persist_attr): Remove.
(attr_lower_exclusions): Remove ATTR_PERSIST exclusion.
(attr_upper_exclusions): Likewise.
(attr_either_exclusions): Likewise.
(attr_persist_exclusions): Remove.
(msp430_attribute_table): Remove ATTR_PERSIST handling.
(msp430_handle_generic_attribute): Remove ATTR_PERSIST section conflict
handling.
(TARGET_ASM_INIT_SECTIONS): Remove.
(msp430_init_sections): Remove.
(msp430_select_section): Use default_elf_select_section for decls with
the "persistent" attribute.
(msp430_section_type_flags): Remove ".persistent" section handling.
* doc/extend.texi (MSP430 Variable Attributes): Remove "noinit" and
"persistent" documentation.
2020-11-23 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (maybe_push_to_hybrid_worklist): Skip
debug stmts.
2020-11-23 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* doc/extend.texi (Common Variable Attributes): Document the
"persistent" variable attribute.
* doc/sourcebuild.texi (Effective-Target Keywords): Document
the "persistent" effective target keyword.
* tree.h (DECL_PERSISTENT_P): Define.
* varasm.c (bss_initializer_p): Return false for a
DECL_PERSISTENT_P decl initialized to zero.
(default_section_type_flags): Handle the ".persistent" section.
(default_elf_select_section): Likewise.
(default_unique_section): Likewise.
2020-11-23 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* tree.h (DECL_NOINIT_P): Define.
* varasm.c (DECL_NOINIT_P): Check DECL_NOINIT_P before using
unnamed bss/lcomm sections for bss_initializer variables.
(default_elf_select_section): Use DECL_NOINIT_P instead of
looking up attribute for .noinit section selection.
(default_unique_section): Check DECL_NOINIT_P for .noinit
section selection.
2020-11-23 Matthew Malcomson <matthew.malcomson@arm.com>
* doc/install.texi: Document bootstrap-asan option.
2020-11-22 Uroš Bizjak <ubizjak@gmail.com>
PR target/97873
* config/i386/i386.md (abs<mode>2): Use SWI48DWI mode iterator.
(*abs<dwi>2_doubleword): Use DWIH mode iterator.
(<maxmin:code><mode>3): Use SWI48DWI mode iterator.
(*<maxmin:code><dwi>3_doubleword): Use DWIH mode iterator.
2020-11-22 Austin Law <austinklaw@gmail.com>
* config/h8300/addsub.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters.
(add<mod>3_incdec): Remove pattern
(adds/subs splitter): Only run before reload.
* config/h8300/bitfield.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output
of the splitters.
(cstoreqi4, cstorehi4, cstoresi4): Comment out
(*bstzhireg, *cmpstz, *bstz, *bistz, *cmpcondset): Likewise
(*condbset, *cmpcondbclr, *condbclr): Likewise.
(*cmpcondbsetreg, *condbsetreg, *cmpcondbclrreg): Likewise.
(*condbclrreg): Likewise.
* config/h8300/combiner.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters. Add appropriate CC register clobbers to
existing splitters.
(*addsi3_and_r_1): Disable for now.
(*addsi3_and_not_r_1, bit-test branches): Likewise.
* config/h8300/divmod.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters.
* config/h8300/extensions.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters.
* config/h8300/genmova.sh: Drop "cc" attribute from patterns.
* config/h8300/mova.md: Drop "cc" attribute from patterns.
* config/h8300/h8300-modes.def: Add CCZN and CCZNV modes.
* config/h8300/h8300-protos.h (output_plussi): Update prototype.
(compute_plussi_length): Likewise.
(h8300_select_cc_mode): Add prototype.
(compute_a_shift_cc): Remove prototype
(cmpute_logical_op_cc): Likewise.
* config/h8300/h8300.c (names_big): Add "cc" register.
(names_extended, names_upper_extended): Likewise.
(h8300_emit_stack_adjustment): Be more selective about setting
RTX_FRAME_RELATED_P.
(h8300_print_operand): Handle CCZN mode
(h8300_select_cc_mode): New function.
(notice_update_cc): if-0 out. Only kept for reference purposes.
(h8300_expand_store): Likewise.
(h8300_binary_length): Handle new insn forms.
(output_plussi): Add argument for NEED_FLAGS and handle that case.
(compute_plussi_length): Likewise.
(compute_logical_op_cc): Return integer.
(TARGET_FLAGS_REGNUM): Define.
* config/h8300/h8300.h (FIRST_PSEUDO_REGISTER): Bump for cc register.
(FIXED_REGISTERS, CALL_USED_REGISTERS): Handle cc register.
(REG_ALLOC_ORDER, REGISTER_NAMES): Likewise.
(SELECT_CC_MODE): Define.
* config/h8300/h8300.md: Add CC_REG.
Do not include peepholes.md for now.
* config/h8300/jumpcall.md (cbranchqi4): Consolidate into
cbranch<mode>4.
(cbranchhi4, cbranchsi4): Likewise.
(cbranch<mode>4): New expander.
(branch): New define_insn_and_split for use before reload.
(branch_1, branch_1_false): New patterns to match splitter output.
Remove code to manage cc_status.flags.
* config/h8300/logical.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters. Move various peepholes into this file.
* config/h8300/movepush.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters.
* config/h8300/multiply.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters.
* config/h8300/other.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters.
* config/h8300/peepholes.md: Remove peepholes that were moved
elsewhere.
* config/h8300/predicates.md (simple_memory_operand): New.
* config/h8300/proepi.md: Drop "cc" attribute setting.
* config/h8300/shiftrotate.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters.
* config/h8300/testcompare.md: Turn existing patterns into
define_insn_and_split style patterns where the splitter
adds a clobber of the condition code register. Drop "cc"
attribute. Add _clobber_flags patterns to match output of
the splitters. Disable various patterns for now.
Move some peepholes that were previously in peepholes.md here.
* config/h8300/save.md: New file.
2020-11-22 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/95853
* tree-ssa-math-opts.c (uaddsub_overflow_check_p): Add maxval
argument, if non-NULL, instead look for r > maxval or r <= maxval
comparisons.
(match_uaddsub_overflow): Pattern recognize even other forms of
__builtin_add_overflow, in particular when addition is performed
in a wider type and result compared to maximum of the narrower
type.
2020-11-22 Jeff Law <law@redhat.com>
* config/h8300/jumpcall.md (branch_true, branch_false): Revert
recent change. Ensure operand[0] is always the target label.
2020-11-22 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-c.c (struct f_align_stack): Rename
to type from align_stack to f_align_stack.
(push_field_alignment): Likewise.
(pop_field_alignment): Likewise.
2020-11-21 Marek Polacek <polacek@redhat.com>
PR c++/94695
* doc/invoke.texi: Update the -Wrange-loop-construct description.
2020-11-21 Jan Hubicka <jh@suse.cz>
* tree-ssa-alias.c (ao_compare::compare_ao_refs,
ao_compare::hash_ao_ref): Use OEP_MATCH_SIDE_EFFECTS.
2020-11-21 Jan Hubicka <jh@suse.cz>
* ipa-icf.c (sem_function::equals_wpa): Do not compare ODR type with
-fno-devirtualize.
(sem_item_optimizer::update_hash_by_addr_refs): Hash anonymous ODR
types by TYPE_UID of their main variant.
2020-11-21 Aaron Sawdey <acsawdey@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Enable vector pair memcpy/memmove expansion.
2020-11-21 Aaron Sawdey <acsawdey@linux.ibm.com>
* config/rs6000/mma.md (unspec): Add assemble/extract UNSPECs.
(movoi): Change to movoo.
(*movpoi): Change to *movoo.
(movxi): Change to movxo.
(*movpxi): Change to *movxo.
(mma_assemble_pair): Change to OO mode.
(*mma_assemble_pair): New define_insn_and_split.
(mma_disassemble_pair): New define_expand.
(*mma_disassemble_pair): New define_insn_and_split.
(mma_assemble_acc): Change to XO mode.
(*mma_assemble_acc): Change to XO mode.
(mma_disassemble_acc): New define_expand.
(*mma_disassemble_acc): New define_insn_and_split.
(mma_<acc>): Change to XO mode.
(mma_<vv>): Change to XO mode.
(mma_<avv>): Change to XO mode.
(mma_<pv>): Change to OO mode.
(mma_<apv>): Change to XO/OO mode.
(mma_<vvi4i4i8>): Change to XO mode.
(mma_<avvi4i4i8>): Change to XO mode.
(mma_<vvi4i4i2>): Change to XO mode.
(mma_<avvi4i4i2>): Change to XO mode.
(mma_<vvi4i4>): Change to XO mode.
(mma_<avvi4i4>): Change to XO mode.
(mma_<pvi4i2>): Change to XO/OO mode.
(mma_<apvi4i2>): Change to XO/OO mode.
(mma_<vvi4i4i4>): Change to XO mode.
(mma_<avvi4i4i4>): Change to XO mode.
* config/rs6000/predicates.md (input_operand): Allow opaque.
(mma_disassemble_output_operand): New predicate.
* config/rs6000/rs6000-builtin.def:
Changes to disassemble builtins.
* config/rs6000/rs6000-call.c (rs6000_return_in_memory):
Disallow __vector_pair/__vector_quad as return types.
(rs6000_promote_function_mode): Remove function return type
check because we can't test it here any more.
(rs6000_function_arg): Do not allow __vector_pair/__vector_quad
as as function arguments.
(rs6000_gimple_fold_mma_builtin):
Handle mma_disassemble_* builtins.
(rs6000_init_builtins): Create types for XO/OO modes.
* config/rs6000/rs6000-modes.def: DElete OI, XI,
POI, and PXI modes, and create XO and OO modes.
* config/rs6000/rs6000-string.c (expand_block_move):
Update to OO mode.
* config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok_uncached):
Update for XO/OO modes.
(rs6000_rtx_costs): Make UNSPEC_MMA_XXSETACCZ cost 0.
(rs6000_modes_tieable_p): Update for XO/OO modes.
(rs6000_debug_reg_global): Update for XO/OO modes.
(rs6000_setup_reg_addr_masks): Update for XO/OO modes.
(rs6000_init_hard_regno_mode_ok): Update for XO/OO modes.
(reg_offset_addressing_ok_p): Update for XO/OO modes.
(rs6000_emit_move): Update for XO/OO modes.
(rs6000_preferred_reload_class): Update for XO/OO modes.
(rs6000_split_multireg_move): Update for XO/OO modes.
(rs6000_mangle_type): Update for opaque types.
(rs6000_invalid_conversion): Update for XO/OO modes.
* config/rs6000/rs6000.h (VECTOR_ALIGNMENT_P):
Update for XO/OO modes.
* config/rs6000/rs6000.md (RELOAD): Update for XO/OO modes.
2020-11-21 Aaron Sawdey <acsawdey@linux.ibm.com>
* typeclass.h: Add opaque_type_class.
* builtins.c (type_to_class): Identify opaque type class.
* dwarf2out.c (is_base_type): Handle opaque types.
(gen_type_die_with_usage): Handle opaque types.
* expr.c (count_type_elements): Opaque types should
never have initializers.
* ipa-devirt.c (odr_types_equivalent_p): No type-specific handling
for opaque types is needed as it eventually checks the underlying
mode which is what is important.
* tree-streamer.c (record_common_node): Handle opaque types.
* tree.c (type_contains_placeholder_1): Handle opaque types.
(type_cache_hasher::equal): No additional comparison needed for
opaque types.
2020-11-20 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000-call.c (rs6000_expand_builtin): Add missing
XSCMP* cases for IEEE 128-bit long double.
2020-11-20 Jason Merrill <jason@redhat.com>
PR c++/97918
* dwarf2out.c (dwarf2out_early_finish): flush_limbo_die_list
after gen_scheduled_generic_parms_dies.
2020-11-20 Martin Sebor <msebor@redhat.com>
PR middle-end/97879
* tree-core.h (enum attribute_flags): Add ATTR_FLAG_INTERNAL.
2020-11-20 Jan Hubicka <jh@suse.cz>
* ipa-icf-gimple.c (func_checker::hash_operand): Improve hashing of
decls.
2020-11-20 Jan Hubicka <jh@suse.cz>
* ipa-icf-gimple.c (func_checker::compare_decl): Do not compare types
of local variables.
2020-11-20 Nathan Sidwell <nathan@acm.org>
* doc/invoke.texi: Replace a couple of @code with @command
2020-11-20 Tamar Christina <tamar.christina@arm.com>
* tree-vect-slp.c (vectorizable_slp_permutation): Update types on nodes
when needed.
2020-11-20 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (maybe_push_to_hybrid_worklist): New function.
(vect_detect_hybrid_slp): Use it. Perform a backward walk
over the IL.
2020-11-20 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_print_slp_tree): Also dump
SLP_TREE_REPRESENTATIVE.
2020-11-20 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/88101
* builtins.def (BUILT_IN_CLEAR_PADDING): New built-in function.
* gimplify.c (gimplify_call_expr): Rewrite single argument
BUILT_IN_CLEAR_PADDING into two-argument variant.
* gimple-fold.c (clear_padding_unit, clear_padding_buf_size): New
const variables.
(struct clear_padding_struct): New type.
(clear_padding_flush, clear_padding_add_padding,
clear_padding_emit_loop, clear_padding_type,
clear_padding_union, clear_padding_real_needs_padding_p,
clear_padding_type_may_have_padding_p,
gimple_fold_builtin_clear_padding): New functions.
(gimple_fold_builtin): Handle BUILT_IN_CLEAR_PADDING.
* doc/extend.texi (__builtin_clear_padding): Document.
2020-11-20 Jakub Jelinek <jakub@redhat.com>
PR target/97528
* config/arm/arm.c (neon_vector_mem_operand): For POST_MODIFY, require
first POST_MODIFY operand is a REG and is equal to the first operand
of PLUS.
2020-11-20 Eric Botcazou <ebotcazou@adacore.com>
* gimple-ssa-store-merging.c (struct merged_store_group): Add
new 'consecutive' field.
(merged_store_group): Set it to true.
(do_merge): Set it to false if the store is not consecutive and
set string_concatenation to false in this case.
(merge_into): Call do_merge on entry.
(merge_overlapping): Likewise.
2020-11-20 Jan Hubicka <jh@suse.cz>
* ipa-icf-gimple.c (func_checker::operand_equal_p): Fix comment.
2020-11-20 Jan Hubicka <jh@suse.cz>
* ipa-icf-gimple.c (func_checker::hash_operand): Hash gimple clobber.
(func_checker::operand_equal_p): Special case gimple clobber.
2020-11-20 Uroš Bizjak <ubizjak@gmail.com>
PR target/97873
* config/i386/i386.md (*neg<mode>2_2): Rename from
"*neg<mode>2_cmpz". Use CCGOCmode instead of CCZmode.
(*negsi2_zext): Rename from *negsi2_cmpz_zext.
Use CCGOCmode instead of CCZmode.
(*neg<mode>_ccc_1): New insn pattern.
(*neg<dwi>2_doubleword): Use *neg<mode>_ccc_1.
(abs<mode>2): Add FLAGS_REG clobber.
Use TARGET_CMOVE insn predicate.
(*abs<mode>2_1): New insn_and_split pattern.
(*absdi2_doubleword): Ditto.
(<maxmin:code><mode>3): Use SWI48x mode iterator.
(*<maxmin:code><mode>3): Use SWI48 mode iterator.
* config/i386/i386-features.c
(general_scalar_chain::compute_convert_gain): Handle ABS code.
(general_scalar_chain::convert_insn): Ditto.
(general_scalar_to_vector_candidate_p): Ditto.
2020-11-20 Jakub Jelinek <jakub@redhat.com>
PR other/97911
* configure.ac: In SERIAL_LIST use lang words without .serial
suffix. Change $lang.prev from a target to variable and instead
of depending on *.serial expand to the *.serial variable if
the word is in the SERIAL_LIST at all, otherwise to nothing.
* configure: Regenerated.
2020-11-20 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/rs6000.md (p8_mtvsrd_df): Fix insn type.
2020-11-20 Martin Uecker <muecker@gwdg.de>
* gimplify.c (gimplify_modify_expr_rhs): Optimizie
NOP_EXPRs that contain compound literals.
2020-11-19 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91029
* range-op.cc (operator_trunc_mod::op1_range): Don't require signed
types, nor require that op2 >= 0. Implement (a % b) >= x && x > 0
implies a >= x and (a % b) <= x && x < 0 implies a <= x.
(operator_trunc_mod::op2_range): New method.
2020-11-19 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/93781
* range-op.cc (get_shift_range): Rename from
undefined_shift_range_check and now return valid shift ranges.
(operator_lshift::fold_range): Use result from get_shift_range.
(operator_rshift::fold_range): Ditto.
2020-11-19 Jan Hubicka <jh@suse.cz>
* fold-const.c (operand_compare::operand_equal_p): Fix thinko in
COMPONENT_REF handling and guard types_same_for_odr by
virtual_method_call_p.
(operand_compare::hash_operand): Likewise.
2020-11-19 Jakub Jelinek <jakub@redhat.com>
PR c/97860
* tree.c (array_type_nelts): For complete arrays with zero min
and NULL max and zero size return -1.
2020-11-19 Nathan Sidwell <nathan@acm.org>
* configure.ac: Add tests for fstatat, sighandler_t, O_CLOEXEC,
unix-domain and ipv6 sockets.
* config.in: Rebuilt.
* configure: Rebuilt.
2020-11-19 Dimitar Dimitrov <dimitar@dinux.eu>
* config/pru/alu-zext.md: Add lmbd patterns for zero_extend
variants.
* config/pru/pru.c (enum pru_builtin): Add HALT and LMBD.
(pru_init_builtins): Ditto.
(pru_builtin_decl): Ditto.
(pru_expand_builtin): Ditto.
* config/pru/pru.h (CLZ_DEFINED_VALUE_AT_ZERO): Define PRU
value for CLZ with zero value parameter.
* config/pru/pru.md: Add halt, lmbd and clz patterns.
* doc/extend.texi: Document PRU builtins.
2020-11-19 Richard Sandiford <richard.sandiford@arm.com>
* doc/invoke.texi (-fvect-cost-model): Add a very-cheap model.
* common.opt (fvect-cost-model=): Add very-cheap as a possible option.
(fsimd-cost-model=): Likewise.
(vect_cost_model): Add very-cheap.
* flag-types.h (vect_cost_model): Add VECT_COST_MODEL_VERY_CHEAP.
Put the values in order of increasing aggressiveness.
* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Use
range checks when comparing against VECT_COST_MODEL_CHEAP.
(vect_prune_runtime_alias_test_list): Do not allow any alias
checks for the very-cheap cost model.
* tree-vect-loop.c (vect_analyze_loop_costing): Do not allow
any peeling for the very-cheap cost model. Also require one
iteration of the vector loop to pay for itself.
2020-11-19 Wilco Dijkstra <wdijkstr@arm.com>
* config/aarch64/aarch64.c (neoversen1_tunings): Use new
cortexa76_extra_costs.
(neoversev1_tunings): Likewise.
(neoversen2_tunines): Likewise.
* config/arm/aarch-cost-tables.h (cortexa76_extra_costs):
add new costs.
2020-11-19 Wilco Dijkstra <wdijkstr@arm.com>
* config/aarch64/aarch64.c (aarch64_expand_cpymem): Cleanup code and
comments, tweak expansion decisions and improve tail expansion.
2020-11-19 Richard Biener <rguenther@suse.de>
* fold-const.c (operand_compare::hash_operand): Fix typo.
2020-11-19 Richard Biener <rguenther@suse.de>
* tree-ssa-reassoc.c (get_rank): Refactor to consistently
use the cache and dump ranks assigned.
2020-11-19 Jan Hubicka <jh@suse.cz>
* fold-const.c (operand_compare::operand_equal_p): More OBJ_TYPE_REF
matching to correct place; drop OEP_ADDRESS_OF for TOKEN, OBJECT and
class.
(operand_compare::hash_operand): Hash ODR type for OBJ_TYPE_REF.
2020-11-19 Joel Hutton <joel.hutton@arm.com>
* config/aarch64/aarch64-simd.md: Add vec_widen_lshift_hi/lo<mode>
patterns.
* tree-vect-stmts.c (vectorizable_conversion): Fix for widen_lshift
case.
2020-11-19 Joel Hutton <joel.hutton@arm.com>
* doc/generic.texi: Document new widen_plus/minus_lo/hi tree codes.
* doc/md.texi: Document new widenening add/subtract hi/lo optabs.
* expr.c (expand_expr_real_2): Add widen_add, widen_subtract cases.
* optabs-tree.c (optab_for_tree_code): Add case for widening optabs.
* optabs.def (OPTAB_D): Define vectorized widen add, subtracts.
* tree-cfg.c (verify_gimple_assign_binary): Add case for widening adds,
subtracts.
* tree-inline.c (estimate_operator_cost): Add case for widening adds,
subtracts.
* tree-vect-generic.c (expand_vector_operations_1): Add case for
widening adds, subtracts
* tree-vect-patterns.c (vect_recog_widen_add_pattern): New recog
pattern.
(vect_recog_widen_sub_pattern): New recog pattern.
(vect_recog_average_pattern): Update widened add code.
(vect_recog_average_pattern): Update widened add code.
* tree-vect-stmts.c (vectorizable_conversion): Add case for widened add,
subtract.
(supportable_widening_operation): Add case for widened add, subtract.
* tree.def
(WIDEN_PLUS_EXPR): New tree code.
(WIDEN_MINUS_EXPR): New tree code.
(VEC_WIDEN_ADD_HI_EXPR): New tree code.
(VEC_WIDEN_PLUS_LO_EXPR): New tree code.
(VEC_WIDEN_MINUS_HI_EXPR): New tree code.
(VEC_WIDEN_MINUS_LO_EXPR): New tree code.
2020-11-19 Joel Hutton <joel.hutton@arm.com>
* config/aarch64/aarch64-simd.md: New patterns
vec_widen_saddl_lo/hi_<mode>.
2020-11-19 Richard Biener <rguenther@suse.de>
PR tree-optimization/97901
* tree-ssa-propagate.c (clean_up_loop_closed_phi): Compute
dominators and use replace_uses_by.
2020-11-19 Eric Botcazou <ebotcazou@adacore.com>
* dwarf2out.h (struct fixed_point_type_info) <scale_factor>: Turn
numerator and denominator into a tree.
* dwarf2out.c (base_type_die): In the case of a fixed-point type
with arbitrary scale factor, call add_scalar_info on numerator and
denominator to emit the appropriate attributes.
2020-11-19 Richard Biener <rguenther@suse.de>
PR tree-optimization/97897
* tree-complex.c (complex_propagate::visit_stmt): Make sure
abnormally used SSA names are VARYING.
(complex_propagate::visit_phi): Likewise.
* tree-ssa.c (verify_phi_args): Verify PHI arguments on abnormal
edges are SSA names.
2020-11-19 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386.md (*<absneg:code><mode>2_i387_1):
Disable for TARGET_SSE_MATH modes.
2020-11-19 Jeff Law <law@redhat.com>
* config/h8300/constraints.md (R constraint): Add argument to call
to h8300_shift_needs_scratch_p.
(S and T constraints): Similary.
* config/h8300/h8300-protos.h: Update h8300_shift_needs_scratch_p
prototype.
* config/h8300/h8300.c (expand_a_shift): Emit a different pattern
if the shift does not require a scratch register.
(h8300_shift_needs_scratch_p): Refine to be more accurate.
* config/h8300/shiftrotate.md (shiftqi_noscratch): New pattern.
(shifthi_noscratch, shiftsi_noscratch): Similarly.
2020-11-18 Roger Sayle <roger@nextmovesoftware.com>
PR middle-end/85811
* fold-const.c (tree_expr_finite_p): New function to test whether
a tree expression must be finite, i.e. not a FP NaN or infinity.
(tree_expr_infinite_p): New function to test whether a tree
expression must be infinite, i.e. a FP infinity.
(tree_expr_maybe_infinite_p): New function to test whether a tree
expression may be infinite, i.e. a FP infinity.
(tree_expr_signaling_nan_p): New function to test whether a tree
expression must evaluate to a signaling NaN (sNaN).
(tree_expr_maybe_signaling_nan_p): New function to test whether a
tree expression may be a signaling NaN (sNaN).
(tree_expr_nan_p): New function to test whether a tree expression
must evaluate to a (quiet or signaling) NaN.
(tree_expr_maybe_nan_p): New function to test whether a tree
expression me be a (quiet or signaling) NaN.
(tree_binary_nonnegative_warnv_p) [MAX_EXPR]: In the presence
of NaNs, MAX_EXPR is only guaranteed to be non-negative, if both
operands are non-negative.
(tree_call_nonnegative_warnv_p) [CASE_CFN_FMAX,CASE_CFN_FMAX_FN]:
In the presence of signaling NaNs, fmax is only guaranteed to be
non-negative if both operands are negative. In the presence of
quiet NaNs, fmax is non-negative if either operand is non-negative
and not a qNaN, or both operands are non-negative.
* fold-const.h (tree_expr_finite_p, tree_expr_infinite_p,
tree_expr_maybe_infinite_p, tree_expr_signaling_nan_p,
tree_expr_maybe_signaling_nan_p, tree_expr_nan_p,
tree_expr_maybe_nan_p): Prototype new functions here.
* builtins.c (fold_builtin_classify) [BUILT_IN_ISINF]: Fold to
a constant if argument is known to be (or not to be) an Infinity.
[BUILT_IN_ISFINITE]: Fold to a constant if argument is known to
be (or not to be) finite.
[BUILT_IN_ISNAN]: Fold to a constant if argument is known to be
(or not to be) a NaN.
(fold_builtin_fpclassify): Check tree_expr_maybe_infinite_p and
tree_expr_maybe_nan_p instead of HONOR_INFINITIES and HONOR_NANS
respectively.
(fold_builtin_unordered_cmp): Fold UNORDERED_EXPR to a constant
when its arguments are known to be (or not be) NaNs. Check
tree_expr_maybe_nan_p instead of HONOR_NANS when choosing between
unordered and regular forms of comparison operators.
* match.pd (ordered(x,y)->true/false): Constant fold ORDERED_EXPR
if its operands are known to be (or not to be) NaNs.
(unordered(x,y)->true/false): Constant fold UNORDERED_EXPR if its
operands are known to be (or not to be) NaNs.
(sqrt(x)*sqrt(x)->x): Check tree_expr_maybe_signaling_nan_p instead
of HONOR_SNANS.
2020-11-18 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91029
PR tree-optimization/97888
* range-op.cc (operator_trunc_mod::op1_range): Only set op1
range to >= 0 if lhs is > 0, rather than >= 0. Fix up comments.
2020-11-18 Jakub Jelinek <jakub@redhat.com>
* opts.h (struct cl_var): New type.
(cl_vars): Declare.
* optc-gen.awk: Generate cl_vars array.
2020-11-18 Eugene Rozenfeld <Eugene.Rozenfeld@microsoft.com>
PR tree-optimization/96671
* match.pd (three xor patterns): New patterns.
2020-11-18 Jakub Jelinek <jakub@redhat.com>
* optc-save-gen.awk: Initialize var_opt_init. In
cl_optimization_stream_out for params with default values larger than
10, xor the default value with the actual parameter value. In
cl_optimization_stream_in repeat the above xor.
2020-11-18 Jakub Jelinek <jakub@redhat.com>
* configure.ac: Add $lang.prev rules, INDEX.$lang and SERIAL_LIST and
SERIAL_COUNT variables to Make-hooks.
(--enable-link-serialization): New configure option.
* Makefile.in (DO_LINK_SERIALIZATION, LINK_PROGRESS): New variables.
* doc/install.texi (--enable-link-serialization): Document.
* configure: Regenerated.
2020-11-18 Vladimir Makarov <vmakarov@redhat.com>
PR target/97870
* lra-constraints.c (curr_insn_transform): Do not delete asm goto
with wrong constraints. Nullify it saving CFG.
2020-11-18 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.md (mulhi3): New.
(mulsi3): New.
(mulsidi3): Rename to *mulsidi3_inline.
(umulsidi3): Rename to *umulsidi3_inline.
(mulsidi3): New define_expand.
(umulsidi3): New define_expand.
2020-11-18 Richard Biener <rguenther@suse.de>
PR tree-optimization/97886
* tree-vect-loop.c (vectorizable_lc_phi): Properly assign
vector types to invariants for SLP.
2020-11-18 Iain Buclaw <ibuclaw@gdcproject.org>
* config.gcc (*-*-dragonfly*): Add dragonfly-d.o and t-dragonfly.
* config/dragonfly-d.c: New file.
* config/t-dragonfly: New file.
2020-11-18 Jakub Jelinek <jakub@redhat.com>
PR middle-end/97862
* omp-expand.c (expand_omp_for_init_vars): Don't use the sqrt path
if number of iterations is constant 0.
2020-11-18 Kito Cheng <kito.cheng@sifive.com>
* common/config/riscv/riscv-common.c (riscv_ext_version): New.
(riscv_ext_version_table): Ditto.
(get_default_version): Ditto.
(riscv_subset_t::implied_p): New field.
(riscv_subset_t::riscv_subset_t): Init implied_p.
(riscv_subset_list::add): New.
(riscv_subset_list::handle_implied_ext): Pass riscv_subset_t
instead of separated argument.
(riscv_subset_list::to_string): Handle zifencei and zicsr, and
omit version if version is unknown.
(riscv_subset_list::parsing_subset_version): New argument `ext`,
remove default_major_version and default_minor_version, get
default version info via get_default_version.
(riscv_subset_list::parse_std_ext): Update argument for
parsing_subset_version calls.
Handle 2.2 ISA spec, always enable zicsr and zifencei, they are
included in baseline ISA in that time.
(riscv_subset_list::parse_multiletter_ext): Update argument for
`parsing_subset_version` and `add` calls.
(riscv_subset_list::parse): Adjust argument for
riscv_subset_list::handle_implied_ext call.
* config.gcc (riscv*-*-*): Handle --with-isa-spec=.
* config.in (HAVE_AS_MISA_SPEC): New.
(HAVE_AS_MARCH_ZIFENCEI): Ditto.
* config/riscv/riscv-opts.h (riscv_isa_spec_class): New.
(riscv_isa_spec): Ditto.
* config/riscv/riscv.h (HAVE_AS_MISA_SPEC): New.
(ASM_SPEC): Pass -misa-spec if gas supported.
* config/riscv/riscv.opt (riscv_isa_spec_class) New.
* configure.ac (HAVE_AS_MARCH_ZIFENCEI): New test.
(HAVE_AS_MISA_SPEC): Ditto.
* configure: Regen.
2020-11-18 Kito Cheng <kito.cheng@sifive.com>
* common/config/riscv/riscv-common.c (riscv_implied_info):
d and f implied zicsr.
(riscv_ext_flag_table): Handle zicsr and zifencei.
* config/riscv/riscv-opts.h (MASK_ZICSR): New.
(MASK_ZIFENCEI): Ditto.
(TARGET_ZICSR): Ditto.
(TARGET_ZIFENCEI): Ditto.
* config/riscv/riscv.md (clear_cache): Check TARGET_ZIFENCEI.
(fence_i): Ditto.
* config/riscv/riscv.opt (riscv_zi_subext): New.
2020-11-18 Kito Cheng <kito.cheng@sifive.com>
* common/config/riscv/riscv-common.c (single_letter_subset_rank): New.
(multi_letter_subset_rank): Ditto.
(subset_cmp): Ditto.
(riscv_subset_list::add): Insert subext in canonical ordering.
(riscv_subset_list::parse_std_ext): Move handle_implied_ext to ...
(riscv_subset_list::parse): ... here.
2020-11-18 Jiufu Guo <guojiufu@linux.ibm.com>
* cfgloop.h (loop_optimizer_finalize): Add flag argument.
* loop-init.c (loop_optimizer_finalize): Call clean_up_loop_closed_phi.
* tree-cfgcleanup.h (clean_up_loop_closed_phi): New declare.
* tree-ssa-loop.c (tree_ssa_loop_done): Call loop_optimizer_finalize
with flag argument.
* tree-ssa-propagate.c (clean_up_loop_closed_phi): New function.
2020-11-17 Sebastian Pop <spop@amazon.com>
* config.gcc: add configure flags --with-{cpu,arch,tune}-{32,64}
as alias flags for --with-{cpu,arch,tune} on AArch64.
* doc/install.texi: Document new flags for aarch64.
2020-11-17 Sebastian Pop <spop@amazon.com>
* config.gcc: Add --with-tune to AArch64 configure flags.
2020-11-17 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/91029
* range-op.cc (operator_trunc_mod::op1_range): New.
2020-11-17 Jan Hubicka <jh@suse.cz>
* ipa-icf.c (sem_function::hash_stmt): Fix conditional on
variably_modified_type_p.
2020-11-17 Nathan Sidwell <nathan@acm.org>
* tree.h (cache_integer_cst): Add defaulted might_duplicate parm.
* tree.c (cache_integer_cst): Return the integer cst, add
might_duplicate parm to permit finding a small duplicate.
2020-11-17 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/83072
* range-op.cc (wi_optimize_and_or): Remove zero from IOR range when
mask is non-zero.
2020-11-17 Joseph Myers <joseph@codesourcery.com>
* ginclude/float.h (CR_DECIMAL_DIG): Also define for
[__STDC_WANT_IEC_60559_EXT__].
2020-11-17 Joseph Myers <joseph@codesourcery.com>
* ginclude/float.h [__STDC_VERSION__ > 201710L] (FLT_IS_IEC_60559,
DBL_IS_IEC_60559, LDBL_IS_IEC_60559): New macros.
2020-11-17 Aaron Sawdey <acsawdey@linux.ibm.com>
PR target/96791
* mode-classes.def: Add MODE_OPAQUE.
* machmode.def: Add OPAQUE_MODE.
* tree.def: Add OPAQUE_TYPE for types that will use
MODE_OPAQUE.
* doc/generic.texi: Document OPAQUE_TYPE.
* doc/rtl.texi: Document MODE_OPAQUE.
* machmode.h: Add OPAQUE_MODE_P().
* genmodes.c (complete_mode): Add MODE_OPAQUE.
(opaque_mode): New function.
* tree.c (tree_code_size): Add OPAQUE_TYPE.
* tree.h: Add OPAQUE_TYPE_P().
* stor-layout.c (int_mode_for_mode): Treat MODE_OPAQUE modes
like BLKmode.
* ira.c (find_moveable_pseudos): Treat MODE_OPAQUE modes more
like integer/float modes here.
* dbxout.c (dbxout_type): Treat OPAQUE_TYPE like VOID_TYPE.
* tree-pretty-print.c (dump_generic_node): Treat OPAQUE_TYPE
like like other types.
2020-11-17 Jan Hubicka <hubicka@ucw.cz>
Martin Liska <mliska@suse.cz>
* ipa-icf.c: Include data-streamer.h and alias.h.
(sem_function::sem_function): Initialize memory_access_types
and m_alias_sets_hash.
(sem_function::hash_stmt): For memory accesses and when going to
do lto streaming add base and ref types into memory_access_types.
(sem_item_optimizer::write_summary): Stream memory access types.
(sem_item_optimizer::read_section): Likewise and also iniitalize
m_alias_sets_hash.
(sem_item_optimizer::execute): Call
sem_item_optimizer::update_hash_by_memory_access_type.
(sem_item_optimizer::update_hash_by_memory_access_type): Updat.
* ipa-icf.h (sem_function): Add memory_access_types and
m_alias_sets_hash.
2020-11-17 Jan Hubicka <jh@suse.cz>
PR bootstrap/97857
* ipa-devirt.c (odr_based_tbaa_p): Do not ICE when
odr_hash is not initialized
* ipa-utils.h (type_with_linkage_p): Do not sanity check
CXX_ODR_P.
* tree-streamer-out.c (pack_ts_type_common_value_fields): Set
CXX_ODR_P according to the canonical type.
2020-11-17 Nathan Sidwell <nathan@acm.org>
* langhooks-def.h (LANG_HOOKS_PREPROCESS_MAIN_FILE)
(LANG_HOOKS_PREPROCESS_OPTIONS, LANG_HOOKS_PREPROCESS_UNDEF)
(LANG_HOOKS_PREPROCESS_TOKEN): New.
(LANG_HOOKS_INITIALIZER): Add them.
* langhooks.h (struct lang_hooks): Add preprocess_main_file,
preprocess_options, preprocess_undef, preprocess_token hooks. Add
enum PT_flags.
2020-11-17 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/97693
* tree-vect-stmts.c (vectorizable_call): Pass the required vectype
to vect_get_vec_defs_for_operand.
2020-11-17 Liu Hao <lh_mouse@126.com>
* config/i386/msformat-c.c: Add more length modifiers.
2020-11-17 Tamar Christina <tamar.christina@arm.com>
PR driver/97574
* gcc.c (convert_filename): Don't add suffix to things that are
not files.
(not_actual_file_p): Use supplied argument.
2020-11-17 Haochen Gui <guihaoc@gcc.gnu.org>
* final.c (final_scan_insn_1): Set jump table relocatable as the
second argument of targetm.asm_out.function_rodata_section.
* output.h (default_function_rodata_section,
default_no_function_rodata_section): Add the second argument to the
declarations.
* target.def (function_rodata_section): Change the doc and add
the second argument.
* doc/tm.texi: Regenerate.
* varasm.c (jumptable_relocatable): Implement.
(default_function_rodata_section): Add the second argument
and the support for relocatable read only sections.
(default_no_function_rodata_section): Add the second argument.
(function_mergeable_rodata_prefix): Set the second argument to false.
* config/mips/mips.c (mips_function_rodata_section): Add the second
arugment and set it to false.
* config/s390/s390.c (targetm.asm_out.function_rodata_section): Set
the second argument to false.
* config/s390/s390.md: Likewise.
2020-11-17 liuhongt <hongtao.liu@intel.com>
PR target/97194
* config/i386/i386-expand.c (ix86_expand_vector_set_var): New function.
* config/i386/i386-protos.h (ix86_expand_vector_set_var): New Decl.
* config/i386/predicates.md (vec_setm_operand): New predicate,
true for const_int_operand or register_operand under TARGET_AVX2.
* config/i386/sse.md (vec_set<mode>): Support both constant
and variable index vec_set.
2020-11-17 Martin Sebor <msebor@redhat.com>
* tree-ssa-uninit.c (maybe_warn_operand): Call is_empty_type.
* tree.c (default_is_empty_type): Rename...
(is_empty_type): ...to this.
* tree.h (is_empty_type): Declare.
2020-11-17 Martin Sebor <msebor@redhat.com>
PR middle-end/95673
* tree-ssa-strlen.c (used_only_for_zero_equality): Rename...
(use_in_zero_equality): ...to this. Add a default argument.
(handle_builtin_memcmp): Adjust to the name change above.
(handle_builtin_string_cmp): Same.
(maybe_warn_pointless_strcmp): Same. Pass in an explicit argument.
2020-11-17 Joseph Myers <joseph@codesourcery.com>
* ginclude/float.h (DEC32_SNAN, DEC64_SNAN, DEC128_SNAN): New C2x
macros.
2020-11-17 Joseph Myers <joseph@codesourcery.com>
* ginclude/float.h (INFINITY, NAN, FLT_SNAN, DBL_SNAN, LDBL_SNAN)
(FLT16_SNAN, FLT32_SNAN, FLT64_SNAN, FLT128_SNAN, FLT32X_SNAN)
(FLT64X_SNAN, FLT128X_SNAN, DEC_INFINITY, DEC_NAN): New C2x
macros.
* doc/sourcebuild.texi (Effective-Target Keywords): Document inff.
2020-11-17 Armin Brauns via Gcc-patches <gcc-patches@gcc.gnu.org>
* gcc.c: Document %T spec file directive.
* doc/invoke.texi: Remove %p, %P spec file directives.
Add %M, %R, %V, %nSTR, %>S, %<S*, %{%:function(args):X}, %@{...} spec
file directives add sanitize, version-compare, include, gt and
debug-level-gt spec functions.
2020-11-16 Roger Sayle <roger@nextmovesoftware.com>
PR rtl-optimization/92180
* config/i386/i386.c (ix86_hardreg_mov_ok): New function to
determine whether (set DST SRC) should be allowed at this point.
* config/i386/i386-protos.h (ix86_hardreg_mov_ok): Prototype here.
* config/i386/i386-expand.c (ix86_expand_move): Check whether
this is a complex set of a likely spilled hard register, and if
so place the value in a pseudo, and load the hard reg from it.
* config/i386/i386.md (*movdi_internal, *movsi_internal)
(*movhi_internal, *movqi_internal): Make these instructions
conditional on ix86_hardreg_mov_ok.
(*lea<mode>): Make this define_insn_and_split conditional on
ix86_hardreg_mov_ok.
2020-11-16 Martin Liska <mliska@suse.cz>
* params.opt: Add missing dot.
2020-11-16 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (escape_point): New type.
(modref_lattice): New type.
(escape_entry): New type.
(escape_summary): New type.
(escape_summaries_t): New type.
(escape_summaries): New static variable.
(eaf_flags_useful_p): New function.
(modref_summary::useful_p): Add new check_flags
attribute; check eaf_flags for usefulness.
(modref_summary_lto): Add arg_flags.
(modref_summary_lto::useful_p): Add new check_flags
attribute; check eaf_flags for usefulness.
(dump_modref_edge_summaries): New function.
(remove_modref_edge_summaries): New function.
(ignore_retval_p): New predicate.
(ignore_stores_p): Also ignore for const.
(remove_summary): Call remove_modref_edge_summaries.
(modref_lattice::init): New member function.
(modref_lattice::release): New member unction.
(modref_lattice::dump): New member function.
(modref_lattice::add_escape_point): New member function.
(modref_lattice::merge): Two new member functions.
(modref_lattice::merge_deref): New member functions.
(modref_lattice::merge_direct_load): New member function.
(modref_lattice::merge_direct_store): New member function.
(call_lhs_flags): Rename to ...
(merge_call_lhs_flags): ... this one; reimplement using
modreflattice.
(analyze_ssa_name_flags): Replace KNOWN_FLAGS param by LATTICE;
add IPA parametr; use modref_lattice.
(analyze_parms): New parameter IPA and SUMMARY_LTO; update for
modref_lattice; initialize escape_summary.
(analyze_function): Allocate escape_summaries; update uses of useful_p.
(modref_write_escape_summary): New function.
(modref_read_escape_summary): New function.
(modref_write): Write escape summary.
(read_section): Read escape summary.
(modref_read): Initialie escape_summaries.
(remap_arg_flags): New function.
(update_signature): Use it.
(escape_map): New structure.
(update_escape_summary_1, update_escape_summary): New functions.
(ipa_merge_modref_summary_after_inlining): Merge escape summaries.
(propagate_unknown_call): Do not remove useless summaries.
(remove_useless_summaries): Remove them here.
(modref_propagate_in_scc): Update; do not dump scc.
(modref_propagate_dump_scc): New function.
(modref_merge_call_site_flags): New function.
(modref_propagate_flags_in_scc): New function.
(pass_ipa_modref::execute): Use modref_propagate_flags_in_scc
and modref_propagate_dump_scc; delete escape_summaries.
(ipa_modref_c_finalize): Remove escape_summaries.
* ipa-modref.h (modref_summary): Update prototype of useful_p.
* params.opt (param=modref-max-escape-points): New param.
* doc/invoke.texi (modref-max-escape-points): Document.
2020-11-16 Jan Hubicka <jh@suse.cz>
PR middle-end/97840
* ipa-modref.c (analyze_ssa_name_flags): Skip clobbers if inlining
is done.
* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Make stmt gcall;
skip const calls and unused arguments.
(warn_uninitialized_vars): Update prototype.
2020-11-16 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (vect_gather_slp_loads): Declare.
* tree-vect-loop.c (vect_analyze_loop_2): Call
vect_gather_slp_loads.
* tree-vect-slp.c (vect_build_slp_instance): Do not gather
SLP loads here.
(vect_gather_slp_loads): Remove wrapper, new function.
(vect_slp_analyze_bb_1): Call it.
2020-11-16 Richard Biener <rguenther@suse.de>
* tree-ssa-loop-im.c (analyze_memory_references): Add
store_motion parameter and elide unnecessary work.
(tree_ssa_lim_initialize): Likewise.
(loop_invariant_motion_in_fun): Pass down store_motion.
2020-11-16 Martin Liska <mliska@suse.cz>
* params.opt: All modref parameters miss Optimization and Param
keyword as seen in testsuite failure.
2020-11-16 Jan Hubicka <jh@suse.cz>
* params.opt (-param=modref-max-depth=): Add missing full stop.
2020-11-16 Sebastian Huber <sebastian.huber@embedded-brains.de>
* common.opt (fprofile-info-section): New.
* coverage.c (build_gcov_info_var_registration): New.
(coverage_obj_init): Evaluate profile_info_section and use
build_gcov_info_var_registration().
* doc/invoke.texi (fprofile-info-section): Document.
* opts.c (common_handle_option): Process fprofile-info-section
option.
2020-11-16 Richard Biener <rguenther@suse.de>
PR tree-optimization/97838
* tree-vect-slp.c (vect_slp_build_vertices): Properly handle
not backwards reachable cycles.
(vect_optimize_slp): Check a node is leaf before marking it
visited.
2020-11-16 Martin Liska <mliska@suse.cz>
PR tree-optimization/97736
* tree-switch-conversion.c (switch_decision_tree::analyze_switch_statement):
Prefer bit tests.
2020-11-16 Richard Biener <rguenther@suse.de>
PR tree-optimization/97835
* tree-vect-loop.c (vectorizable_induction): Convert step
scalars rather than step vector.
2020-11-16 Richard Biener <rguenther@suse.de>
PR tree-optimization/97830
* tree-ssa-sccvn.c (vn_reference_eq): Check for incomplete
types before comparing TYPE_SIZE.
2020-11-16 Cui,Lili <lili.cui@intel.com>
* config/i386/i386.h: Add PREFETCHW to march=broadwell.
* doc/invoke.texi: Put PREFETCHW back to relation arch.
2020-11-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_output_labelref): Don't process mspabi
hwmult library function names into GCC-style names.
2020-11-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_use_16bit_hwmult): New.
(use_32bit_hwmult): Rename to..
(msp430_use_32bit_hwmult): ..this.
(msp430_muldiv_costs): Use msp430_use_16bit_hwmult and
msp430_use_32bit_hwmult.
(msp430_expand_helper): Use msp430_use_16bit_hwmult and
msp430_use_32bit_hwmult.
(msp430_output_labelref): Use msp430_use_32bit_hwmult.
2020-11-15 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_rtx_costs): Use `rtx_code' rather than
`int' for `code'.
2020-11-15 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_output_int_add) <E_DImode>: Fix a typo
in NO_EXTERNAL_INDIRECT_ADDRESS.
2020-11-15 Maciej W. Rozycki <macro@linux-mips.org>
* config/vax/vax.c (vax_output_int_add) <E_SImode>: Also check
`operands[2]' for being symbolic with PIC rather than checking
`operands[1]' twice.
2020-11-15 Aldy Hernandez <aldyh@redhat.com>
* vr-values.c (vr_values::extract_range_builtin): Rename to...
(vr_values::extract_range_from_ubsan_builtin): ...this.
Remove everything but UBSAN code.
(vr_values::extract_range_basic): Call ranger version for
everything except UBSAN built-ins.
* vr-values.h (class vr_values): Rename extract_range_builtin to
extract_range_from_ubsan_builtin.
2020-11-15 Vladimir N. Makarov <vmakarov@redhat.com>
* lra.c (lra_process_new_insns): Don't put reload insns in the
last empty BB.
2020-11-15 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (analyze_ssa_name_flags): Make return to clear
EAF_UNUSED flag.
2020-11-14 Jan Hubicka <jh@suse.cz>
* gimple.c: Include ipa-modref-tree.h and ipa-modref.h.
(gimple_call_arg_flags): Use modref to determine flags.
* ipa-modref.c: Include gimple-ssa.h, tree-phinodes.h,
tree-ssa-operands.h, stringpool.h and tree-ssanames.h.
(analyze_ssa_name_flags): Declare.
(modref_summary::useful_p): Summary is also useful if arg flags are
known.
(dump_eaf_flags): New function.
(modref_summary::dump): Use it.
(get_modref_function_summary): Be read for current_function_decl
being NULL.
(memory_access_to): New function.
(deref_flags): New function.
(call_lhs_flags): New function.
(analyze_parms): New function.
(analyze_function): Use it.
* ipa-modref.h (struct modref_summary): Add arg_flags.
* doc/invoke.texi (ipa-modref-max-depth): Document.
* params.opt (ipa-modref-max-depth): New param.
2020-11-14 Jakub Jelinek <jakub@redhat.com>
PR debug/97599
* dwarf2out.c (gen_subprogram_die): Call
gen_unspecified_parameters_die even if not early dwarf, but only
if subr_die is a newly created DIE.
2020-11-14 Monk Chiang <monk.chiang@sifive.com>
PR target/97682
* config/riscv/riscv.h (RISCV_PROLOGUE_TEMP_REGNUM): Change register
to t0.
(RISCV_CALL_ADDRESS_TEMP_REGNUM): New Marco, define t1 register.
(RISCV_CALL_ADDRESS_TEMP): Use it for call instructions.
* config/riscv/riscv.c (riscv_legitimize_call_address): Use
RISCV_CALL_ADDRESS_TEMP.
(riscv_compute_frame_info): Change temporary register to t0 form t1.
(riscv_trampoline_init): Adjust comment.
2020-11-14 Jim Wilson <jimw@sifive.com>
cooper.joshua <cooper.joshua@linux.alibaba.com>
* config/riscv/riscv.c (riscv_asan_shadow_offset): New.
(TARGET_ASAN_SHADOW_OFFSET): New.
* doc/tm.texi: Regenerated.
* target.def (asan_shadow_offset); Mention that it can return zero.
* toplev.c (process_options): Check for and handle zero return from
targetm.asan_shadow_offset call.
2020-11-14 Jakub Jelinek <jakub@redhat.com>
* gimplify.c (gimplify_omp_for): Add OMP_CLAUSE_ALLOCATE_ALLOCATOR
decls as firstprivate on task clauses even when allocate clause
decl is not lastprivate.
* omp-low.c (install_var_field): Don't dereference omp_is_reference
types if mask is 33 rather than 1.
(scan_sharing_clauses): Populate allocate_map even for task
constructs. For now remove it back for variables mentioned in
reduction and in_reduction clauses on task/taskloop constructs
or on VLA task firstprivates. For firstprivate on task construct,
install the var field into field_map with by_ref and 33 instead
of false and 1 if mentioned in allocate clause.
(lower_private_allocate): Set TREE_THIS_NOTRAP on the created
MEM_REF.
(lower_rec_input_clauses): Handle allocate for task firstprivatized
non-VLA variables.
(create_task_copyfn): Likewise.
2020-11-13 Jan Hubicka <jh@suse.cz>
* tree-ssa-alias.c (ao_ref_base_alias_ptr_type): Remove accidental
commit.
(ao_ref_alias_ptr_type): Remove accidental commit.
2020-11-13 Kwok Cheung Yeung <kcy@codesourcery.com>
* omp-oacc-kernels-decompose.cc (maybe_build_inner_data_region):
Use langhook instead of accessing language-specific decl
information.
2020-11-13 Gergö Barany <gergo@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
* omp-oacc-kernels-decompose.cc: New.
* Makefile.in (OBJS): Add it.
* passes.def: Instantiate it.
* tree-pass.h (make_pass_omp_oacc_kernels_decompose): Declare.
* flag-types.h (enum openacc_kernels): Add.
* doc/invoke.texi (-fopenacc-kernels): Document.
* gimple.h (enum gf_mask): Add
'GF_OMP_TARGET_KIND_OACC_PARALLEL_KERNELS_PARALLELIZED',
'GF_OMP_TARGET_KIND_OACC_PARALLEL_KERNELS_GANG_SINGLE',
'GF_OMP_TARGET_KIND_OACC_DATA_KERNELS'.
(is_gimple_omp_oacc, is_gimple_omp_offloaded): Handle these.
* gimple-pretty-print.c (dump_gimple_omp_target): Likewise.
* omp-expand.c (expand_omp_target, build_omp_regions_1)
(omp_make_gimple_edges): Likewise.
* omp-low.c (scan_sharing_clauses, scan_omp_for)
(check_omp_nesting_restrictions, lower_oacc_reductions)
(lower_oacc_head_mark, lower_omp_target): Likewise.
* omp-offload.c (execute_oacc_device_lower): Likewise.
2020-11-13 Thomas Schwinge <thomas@codesourcery.com>
* omp-low.c (scan_sharing_clauses, scan_omp_for)
(lower_oacc_reductions, lower_omp_target): More explicit checking
of which OMP constructs we're expecting.
2020-11-13 Thomas Schwinge <thomas@codesourcery.com>
* omp-expand.c (expand_omp_target): Attach an attribute to all
outlined OpenACC compute regions.
* omp-offload.c (execute_oacc_device_lower): Adjust.
2020-11-13 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_summaries::insert,
modref_summaries_lto::insert): Remove summary if ipa-modref is disabled.
2020-11-13 Jan Hubicka <jh@suse.cz>
* attr-fnspec.h (attr_fnspec::arg_readonly_p): Accept '1'...'9'.
2020-11-13 Peter Jones <pjones@redhat.com>
* doc/extend.texi: Clarify the documentation for the ms_abi
function attribute.
2020-11-13 Andrew MacLeod <amacleod@redhat.com>
* gimple-range.h (gimple_range_handler): Cast to gimple stmt
kinds before asking for code and type.
* gimple.h (gimple_expr_code): Call gassign and gcond routines
to get their expr_code.
2020-11-13 Jason Merrill <jason@redhat.com>
* dwarf2out.c (gen_enumeration_type_die): Call
equate_decl_number_to_die for enumerators.
(gen_member_die): Don't move enumerators to their
enclosing class.
(dwarf2out_imported_module_or_decl_1): Allow importing
individual enumerators.
(force_decl_die): Handle CONST_DECL.
2020-11-13 Vladimir N. Makarov <vmakarov@redhat.com>
* cfgexpand.c (expand_asm_stmt): Output asm goto with outputs too.
Place insns after asm goto on edges.
* doc/extend.texi: Reflect the changes in asm goto documentation.
* gimple.c (gimple_build_asm_1): Remove an assert checking output
absence for asm goto.
* gimple.h (gimple_asm_label_op, gimple_asm_set_label_op): Take
possible asm goto outputs into account.
* ira.c (ira): Remove critical edges for potential asm goto output
reloads.
(ira_nullify_asm_goto): New function.
* ira.h (ira_nullify_asm_goto): New prototype.
* lra-assigns.c (lra_split_hard_reg_for): Use ira_nullify_asm_goto.
Check that splitting is done inside a basic block.
* lra-constraints.c (curr_insn_transform): Permit output reloads
for any jump insn.
* lra-spills.c (lra_final_code_change): Remove USEs added in ira
for asm gotos.
* lra.c (lra_process_new_insns): Place output reload insns after
jumps in the beginning of destination BBs.
* reload.c (find_reloads): Report error for asm gotos with
outputs. Modify them to keep CFG consistency to avoid crashes.
* tree-into-ssa.c (rewrite_stmt): Don't put debug stmt after asm
goto.
2020-11-13 Jakub Jelinek <jakub@redhat.com>
* omp-low.c (scan_sharing_clauses): For now remove for reduction
clauses with inscan or task modifiers decl from allocate_map.
(lower_private_allocate): Handle TYPE_P (new_var).
(lower_rec_input_clauses): Handle allocate clause for C/C++ array
reductions.
2020-11-13 Martin Jambor <mjambor@suse.cz>
PR ipa/97816
* ipa-cp.c (value_topo_info<valtype>::propagate_effects): Use
safe_add instead of a simple addition.
2020-11-13 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (TARGET_INSN_COST): Define.
(msp430_insn_cost): New function.
* config/msp430/msp430.h (BRANCH_COST): Define.
(LOGICAL_OP_NON_SHORT_CIRCUIT): Define.
2020-11-13 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430-protos.h (msp430x_extendhisi): Return int
instead of char *.
(msp430_output_asm_shift_insns): Likewise.
Add new return_length argument.
(msp430x_insn_required): Add prototype.
* config/msp430/msp430.c (msp430_output_asm_shift_insns): Return the
total length, in bytes, of the emitted instructions.
(msp430x_insn_required): New function.
(msp430x_extendhisi): Return the total length, in bytes, of the
emitted instructions.
* config/msp430/msp430.h (ADJUST_INSN_LENGTH): Define.
* config/msp430/msp430.md: New define_attr "type".
New define_attr "extension".
New define_attr "length_multiplier".
New define_attr "extra_length".
Rewrite define_attr "length".
Set type, extension, length, length_multiplier or extra_length insn
attributes on all insns, as appropriate.
(andneghi3): Rewrite using constraints instead of C code to decide
output insns.
* config/msp430/predicates.md (msp430_cheap_operand): New predicate.
(msp430_high_memory_operand): New predicate.
2020-11-13 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (use_helper_for_const_shift): Add forward
declaration.
Remove unused argument.
(struct msp430_multlib_costs): New struct.
(msp430_is_mem_indirect): New function.
(msp430_costs): Likewise.
(msp430_shift_costs): Likewise.
(msp430_muldiv_costs): Likewise.
(msp430_get_inner_dest_code): Likewise.
(msp430_single_op_cost): Likewise.
(msp430_rtx_costs): Rewrite from scratch.
(msp430_expand_shift): Adjust use_helper_for_const_shift call.
2020-11-13 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (struct single_op_cost): New struct.
(struct double_op_cost): Likewise.
(TARGET_REGISTER_MOVE_COST): Don't define but add comment.
(TARGET_MEMORY_MOVE_COST): Define to...
(msp430_memory_move_cost): New function.
(BRANCH_COST): Don't define but add comment.
2020-11-13 Jan Hubicka <jh@suse.cz>
* ipa-icf-gimple.c: Include tree-ssa-alias-compare.h.
(find_checker::func_checker): Initialize m_tbaa.
(func_checker::hash_operand): Use hash_ao_ref for memory accesses.
(func_checker::compare_operand): Use compare_ao_refs for memory
accesses.
(func_checker::cmopare_gimple_assign): Do not check LHS types
of memory stores.
* ipa-icf-gimple.h (func_checker): Derive from ao_compare;
add m_tbaa.
* ipa-icf.c: Include tree-ssa-alias-compare.h.
(sem_function::equals_private): Update call of
func_checker::func_checker.
* ipa-utils.h (lto_streaming_expected_p): New inline
predicate.
* tree-ssa-alias-compare.h: New file.
* tree-ssa-alias.c: Include tree-ssa-alias-compare.h
and bultins.h
(view_converted_memref_p): New function.
(types_equal_for_same_type_for_tbaa_p): New function.
(ao_ref_alias_ptr_type, ao_ref_base_alias_ptr_type): New functions.
(ao_compare::compare_ao_refs): New member function.
(ao_compare::hash_ao_ref): New function
* tree-ssa-alias.h (ao_ref_base_alias_ptr_type,
ao_ref_alias_ptr_type): Declare.
2020-11-13 Jan Hubicka <jh@suse.cz>
* ipa-icf-gimple.c: Include gimple-walk.h.
(func_checker::compare_ssa_name): Update call of compare_operand.
(func_checker::hash_operand): Fix comment and add variant taking
operand_access_type parameter.
(func_checker::compare_operand): Add operand_access_type parameter.
(func_checker::compare_asm_inputs_outputs): Add
operand_access_type_map parameter; update use of
func_checker::compare_operand.
(func_checker::compare_gimple_call): Update use of
func_checker::compare_operand.
(func_checker::compare_gimple_assign): Likewise.
(func_checker::compare_gimple_cond): Likewise.
(func_checker::compare_gimple_switch): Likewise.
(func_checker::compare_gimple_return): Likewise.
(func_checker::compare_gimple_goto): Likewise.
(func_checker::compare_gimple_asm): Likewise.
(visit_load_store): New static functio.
(func_checker::classify_operands): New member function.
(func_checker::get_operand_access_type): New member function.
* ipa-icf-gimple.h (func_checker::operand_access_type): New enum
(func_checker::operand_access_type_map): New typedef.
(func_checker::compare_operand): Update prototype.
(func_checker::compare_asm_inputs_outputs): Likewise.
(func_checker::cleassify_operands): Declare.
(func_checker::get_operand_access_type): Declare.
(func_checker::hash_operand): New variant with operand_access_type.
* ipa-icf.c (sem_function::hash_stmt): Update uses of hash_operand.
(sem_function::compare_phi_node): Update use of compare_operand.
2020-11-13 Andrea Corallo <andrea.corallo@arm.com>
* config/arm/aarch-common.c (aarch_accumulator_forwarding): Use
RTL predicates where possible.
* config/arm/arm.c (legitimate_pic_operand_p)
(legitimize_pic_address, arm_is_segment_info_known)
(can_avoid_literal_pool_for_label_p)
(thumb1_legitimate_address_p, arm_legitimize_address)
(arm_tls_referenced_p, thumb_legitimate_constant_p)
(REG_OR_SUBREG_REG, thumb1_rtx_costs, thumb1_size_rtx_costs)
(arm_adjust_cost, arm_coproc_mem_operand_wb)
(neon_vector_mem_operand, neon_struct_mem_operand)
(symbol_mentioned_p, label_mentioned_p, )
(load_multiple_sequence, store_multiple_sequence)
(arm_select_cc_mode, arm_reload_in_hi, arm_reload_out_hi)
(mem_ok_for_ldrd_strd, arm_emit_call_insn, output_move_neon)
(arm_attr_length_move_neon, arm_assemble_integer)
(arm_emit_coreregs_64bit_shift, arm_valid_symbolic_address_p)
(extract_base_offset_in_addr, fusion_load_store): Likewise.
2020-11-13 Andrew MacLeod <amacleod@redhat.com>
* gimple-range.cc: (gimple_ranger::range_of_range_op): Check for
ADDR_EXPR and call range_of_address.
(gimple_ranger::range_of_address): Rename from
range_of_non_trivial_assignment and match vrp_stmt_computes_nonzero.
* gimple-range.h: (range_of_address): Renamed.
* range-op.cc: (pointer_table): Add INTEGER_CST handler.
2020-11-13 Martin Jambor <mjambor@suse.cz>
PR tree-optimization/94406
* tree-ssa-loop-im.c (tree_ssa_lim): Renamed to
loop_invariant_motion_in_fun, added a parameter to control store
motion.
(pass_lim::execute): Adjust call to tree_ssa_lim, now
loop_invariant_motion_in_fun.
* tree-ssa-loop-manip.h (loop_invariant_motion_in_fun): Declare.
* gimple-loop-interchange.cc (pass_linterchange::execute): Call
loop_invariant_motion_in_fun if any interchange has been done.
2020-11-13 Richard Biener <rguenther@suse.de>
* tree-ssa-sccvn.c (vn_phi_compute_hash): Always hash the
number of predecessors. Hash the block number also for
loop header PHIs.
(expressions_equal_p): Short-cut SSA name compares, remove
test for NULL operands.
(vn_phi_eq): Cache number of predecessors, change inlined
test from expressions_equal_p.
2020-11-13 Iain Sandoe <iain@sandoe.co.uk>
* doc/extend.texi: Don't try to line-wrap an @r command.
2020-11-13 Richard Biener <rguenther@suse.de>
PR tree-optimization/97812
* tree-vrp.c (register_edge_assert_for_2): Extend the range
according to its sign before seeing whether it fits.
2020-11-13 Andrea Corallo <andrea.corallo@arm.com>
* config/aarch64/aarch64.c (tls_symbolic_operand_type)
(aarch64_load_symref_appropriately, aarch64_mov128_immediate)
(aarch64_expand_mov_immediate)
(aarch64_maybe_expand_sve_subreg_move)
(aarch64_tls_referenced_p, aarch64_cannot_force_const_mem)
(aarch64_base_register_rtx_p, aarch64_classify_index)
(aarch64_classify_address, aarch64_symbolic_address_p)
(aarch64_reinterpret_float_as_int, aarch64_float_const_rtx_p)
(aarch64_can_const_movi_rtx_p, aarch64_select_cc_mode)
(aarch64_print_operand, aarch64_label_mentioned_p)
(aarch64_secondary_reload, aarch64_preferred_reload_class)
(aarch64_address_cost, aarch64_tls_symbol_p)
(aarch64_classify_symbol, aarch64_legitimate_pic_operand_p)
(aarch64_legitimate_constant_p)
(aarch64_sve_float_arith_immediate_p)
(aarch64_sve_float_mul_immediate_p, aarch64_mov_operand_p)
(fusion_load_store): Use RTL operands where possible.
2020-11-13 Sudakshina Das <sudi.das@arm.com>
* config/aarch64/aarch64-protos.h (aarch64_expand_setmem): New
declaration.
* config/aarch64/aarch64.c (aarch64_gen_store_pair): Add case for
E_V16QImode.
(aarch64_set_one_block_and_progress_pointer): New helper for
aarch64_expand_setmem.
(aarch64_expand_setmem): Define the expansion for memset.
* config/aarch64/aarch64.h (CLEAR_RATIO): Tweak to favor
aarch64_expand_setmem when allowed and profitable.
(SET_RATIO): Likewise.
* config/aarch64/aarch64.md: Define pattern for setmemdi.
2020-11-13 Iain Sandoe <iain@sandoe.co.uk>
PR objc/90707
* doc/extend.texi: Document the objc_nullability attribute.
2020-11-13 Iain Sandoe <iain@sandoe.co.uk>
PR objc/77404
* doc/extend.texi: Document the objc_root_class attribute.
* doc/invoke.texi: Document -Wobjc-root-class.
2020-11-13 Richard Biener <rguenther@suse.de>
* cfgexpand.c (gimple_assign_rhs_to_tree): Use
gimple_assign_rhs_class.
(expand_gimple_stmt_1): Likewise.
* gimplify-me.c (gimple_regimplify_operands): Use
gimple_assign_single_p.
* ipa-icf-gimple.c (func_checker::compare_gimple_assign):
Remove redundant compare.
(func_checker::compare_gimple_cond): Use gimple_cond_code.
* tree-ssa-tail-merge.c (gimple_equal_p): Likewise.
* predict.c (predict_loops): Use gimple_assign_rhs_code.
2020-11-13 Aldy Hernandez <aldyh@redhat.com>
* tree-vrp.c (class vrp_folder): Make visit_stmt, visit_phi,
and m_vr_values private.
(vrp_folder::vrp_evaluate_conditional): Remove.
(vrp_folder::vrp_simplify_stmt_using_ranges): Remove.
(vrp_folder::fold_predicate_in): Inline
vrp_evaluate_conditional and vrp_simplify_stmt_using_ranges.
(vrp_folder::fold_stmt): Same.
2020-11-13 Aldy Hernandez <aldyh@redhat.com>
* tree-vrp.c (class vrp_prop): Rename vr_values to m_vr_values.
(vrp_prop::vrp_prop): New.
(vrp_prop::initialize): Rename vr_values to m_vr_values.
(vrp_prop::visit_stmt): Same.
(vrp_prop::visit_phi): Same.
(vrp_prop::finalize): Same.
(execute_vrp): Instantiate vrp_vr_values and pass it to folder
and propagator.
2020-11-13 Aldy Hernandez <aldyh@redhat.com>
* tree-vrp.c (class vrp_prop): Move entire class...
(class vrp_folder): ...before here.
2020-11-13 Aldy Hernandez <aldyh@redhat.com>
* tree-vrp.c (identify_jump_threads): Refactor to..
(vrp_jump_threader::vrp_jump_threader): ...here
(vrp_jump_threader::~vrp_jump_threader): ...and here.
(vrp_jump_threader::after_dom_children): Rename vr_values to
m_vr_values.
(execute_vrp): Use vrp_jump_threader.
2020-11-13 Aldy Hernandez <aldyh@redhat.com>
* tree-vrp.c (struct assert_locus): Move.
(class vrp_insert): Rename to vrp_asserts.
(vrp_insert::build_assert_expr_for): Move to vrp_asserts.
(fp_predicate): Same.
(vrp_insert::dump): Same.
(vrp_insert::register_new_assert_for): Same.
(extract_code_and_val_from_cond_with_ops): Move.
(vrp_insert::finish_register_edge_assert_for): Move to vrp_asserts.
(maybe_set_nonzero_bits): Move.
(vrp_insert::find_conditional_asserts): Move to vrp_asserts.
(stmt_interesting_for_vrp): Move.
(struct case_info): Move.
(compare_case_labels): Move.
(lhs_of_dominating_assert): Move.
(find_case_label_index): Move.
(find_case_label_range): Move.
(class vrp_asserts): New.
(vrp_asserts::build_assert_expr_for): Rename from vrp_insert.
(vrp_asserts::dump): Same.
(vrp_asserts::register_new_assert_for): Same.
(vrp_asserts::finish_register_edge_assert_for): Same.
(vrp_asserts::find_conditional_asserts): Same.
(vrp_asserts::compare_case_labels): Same.
(vrp_asserts::find_switch_asserts): Same.
(vrp_asserts::find_assert_locations_in_bb): Same.
(vrp_asserts::find_assert_locations): Same.
(vrp_asserts::process_assert_insertions_for): Same.
(vrp_asserts::compare_assert_loc): Same.
(vrp_asserts::process_assert_insertions): Same.
(vrp_asserts::insert_range_assertions): Same.
(vrp_asserts::all_imm_uses_in_stmt_or_feed_cond): Same.
(vrp_asserts::remove_range_assertions): Same.
(class vrp_prop): Move.
(all_imm_uses_in_stmt_or_feed_cond): Move.
(vrp_prop::vrp_initialize): Move.
(class vrp_folder): Move.
(vrp_folder::fold_predicate_in): Move.
(vrp_folder::fold_stmt): Move.
(vrp_prop::initialize): Move.
(vrp_prop::visit_stmt): Move.
(enum ssa_prop_result): Move.
(vrp_prop::visit_phi): Move.
(vrp_prop::finalize): Move.
(class vrp_dom_walker): Rename to...
(class vrp_jump_threader): ...this.
(vrp_jump_threader::before_dom_children): Rename from
vrp_dom_walker.
(simplify_stmt_for_jump_threading): Rename to...
(vrp_jump_threader::simplify_stmt): ...here.
(vrp_jump_threader::after_dom_children): Same.
(identify_jump_threads): Move.
(vrp_prop::vrp_finalize): Move array bounds setup code to...
(execute_vrp): ...here.
2020-11-13 Andrew MacLeod <amacleod@redhat.com>
* gimple-range.h (gimple_range_handler): Use gimple_assign and
gimple_cond routines to get type and code.
* range-op.cc (range_op_handler): Check for integral types.
2020-11-12 Nelson Chu <nelson.chu@sifive.com>
* configure: Regenerated.
* configure.ac: If ifunc was supported in the binutils for
linux toolchain, then set enable_gnu_indirect_function to yes.
2020-11-12 Joseph Myers <joseph@codesourcery.com>
* doc/cpp.texi (__has_attribute): Document when scopes are allowed
for C.
(__has_c_attribute): New.
2020-11-12 Jakub Jelinek <jakub@redhat.com>
* builtin-types.def (BT_FN_PTR_SIZE_SIZE_PTRMODE): New function type.
* omp-builtins.def (BUILT_IN_GOACC_DECLARE): Move earlier.
(BUILT_IN_GOMP_ALLOC, BUILT_IN_GOMP_FREE): New builtins.
* gimplify.c (gimplify_scan_omp_clauses): Force allocator into a
decl if it is not NULL, INTEGER_CST or decl.
(gimplify_adjust_omp_clauses): Clear GOVD_EXPLICIT on explicit clauses
which are being removed. Remove allocate clauses for variables not seen
if they are private, firstprivate or linear too. Call
omp_notice_variable on the allocator otherwise.
(gimplify_omp_for): Handle iterator vars mentioned in allocate clauses
similarly to non-is_gimple_reg iterators.
* omp-low.c (struct omp_context): Add allocate_map field.
(delete_omp_context): Delete it.
(scan_sharing_clauses): Fill it from allocate clauses. Remove it
if mentioned also in shared clause.
(lower_private_allocate): New function.
(lower_rec_input_clauses): Handle allocate clause for privatized
variables, except for task/taskloop, C/C++ array reductions for now
and task/inscan variables.
(lower_send_shared_vars): Don't consider variables in allocate_map
as shared.
* omp-expand.c (expand_omp_for_generic, expand_omp_for_static_nochunk,
expand_omp_for_static_chunk): Use expand_omp_build_assign instead of
gimple_build_assign + gsi_insert_after.
* builtins.c (builtin_fnspec): Handle BUILTIN_GOMP_ALLOC and
BUILTIN_GOMP_FREE.
* tree-ssa-ccp.c (evaluate_stmt): Handle BUILTIN_GOMP_ALLOC.
* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Handle
BUILTIN_GOMP_ALLOC.
(mark_all_reaching_defs_necessary_1): Handle BUILTIN_GOMP_ALLOC
and BUILTIN_GOMP_FREE.
(propagate_necessity): Likewise.
2020-11-12 Martin Jambor <mjambor@suse.cz>
* cgraphclones.c (cgraph_node::materialize_clone): Check that clone
info is not NULL before attempting to dump it.
2020-11-12 Martin Jambor <mjambor@suse.cz>
* ipa-cp.c (class ipcp_value_base): Change the type of
local_time_benefit and prop_time_benefit to sreal. Adjust the
constructor initializer.
(ipcp_lattice::print): Dump sreals.
(struct caller_statistics): Change the type of freq_sum to sreal.
(gather_caller_stats): Work with sreal freq_sum.
(incorporate_penalties): Work with sreal evaluation.
(good_cloning_opportunity_p): Adjusted for sreal sreal time_benefit
and freq_sum. Bail out if size_cost is INT_MAX.
(perform_estimation_of_a_value): Work with sreal time_benefit. Avoid
unnecessary capping.
(estimate_local_effects): Pass sreal time benefit to
good_cloning_opportunity_p without capping it. Adjust dumping.
(safe_add): If there can be overflow, return INT_MAX.
(propagate_effects): Work with sreal times.
(get_info_about_necessary_edges): Work with sreal frequencies.
(decide_about_value): Likewise and with sreal time benefits.
2020-11-12 Marek Polacek <polacek@redhat.com>
* system.h (WARN_UNUSED_RESULT): Define for GCC >= 3.4.
* tree.h (maybe_wrap_with_location): Add WARN_UNUSED_RESULT.
2020-11-12 Jan Hubicka <jh@suse.cz>
* fold-const.c (operand_compare::operand_equal_p): Compare field
offsets in operand_equal_p and OEP_ADDRESS_OF.
(operand_compare::hash_operand): Update.
2020-11-12 Richard Biener <rguenther@suse.de>
* bitmap.c (bitmap_list_view): Restore head->current.
* tree-ssa-pre.c (pre_expr_DFS): Elide expr_visited bitmap.
Special-case value expression bitmaps with one element.
(bitmap_find_leader): Likewise.
(sorted_array_from_bitmap_set): Elide expr_visited bitmap.
2020-11-12 Jan Hubicka <jh@suse.cz>
* attr-fnspec.h: Update topleve comment.
(attr_fnspec::arg_direct_p): Accept 1...9.
(attr_fnspec::arg_maybe_written_p): Reject 1...9.
(attr_fnspec::arg_copied_to_arg_p): New member function.
* builtins.c (builtin_fnspec): Update fnspec of block copy.
* tree-ssa-alias.c (attr_fnspec::verify): Update.
2020-11-12 Richard Biener <rguenther@suse.de>
* tree-ssa-pre.c (bitmap_value_replace_in_set): Return
whether we have changed anything.
(do_pre_regular_insertion): Get topologically sorted array
of expressions from caller.
(do_pre_partial_partial_insertion): Likewise.
(insert): Compute topologically sorted arrays of expressions
here and locally iterate actual insertion. Iterate only
when AVAIL_OUT of an already visited block source changed.
2020-11-12 Alex Coplan <alex.coplan@arm.com>
PR target/97730
* config/aarch64/aarch64-sve2.md (@aarch64_sve2_bcax<mode>):
Change to define_expand, add missing (trivially-predicated) not
rtx to fix wrong code bug.
(*aarch64_sve2_bcax<mode>): New.
2020-11-12 Richard Biener <rguenther@suse.de>
PR tree-optimization/97806
* tree-ssa-pre.c (pre_expr_DFS): New overload for visiting
values, visiting all leaders for a value. Use a bitmap
for visited values.
(sorted_array_from_bitmap_set): Walk over values and adjust.
2020-11-12 Andreas Krebbel <krebbel@linux.ibm.com>
PR target/97326
* config/s390/vector.md: Support vector floating point modes in
vec_cmp.
2020-11-12 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/vector.md: Rename tointvec to TOINTVEC.
* config/s390/vx-builtins.md: Likewise.
2020-11-12 Jason Merrill <jason@redhat.com>
PR debug/97060
* dwarf2out.c (gen_subprogram_die): It's a declaration
if DECL_INITIAL isn't set.
2020-11-12 David Malcolm <dmalcolm@redhat.com>
PR tree-optimization/97424
* doc/invoke.texi (Static Analyzer Options): Add
-Wno-analyzer-shift-count-negative and
-Wno-analyzer-shift-count-overflow.
(-Wno-analyzer-shift-count-negative): New.
(-Wno-analyzer-shift-count-overflow): New.
2020-11-11 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-protos.h (darwin_make_eh_symbol_indirect): New.
* config/darwin.c (darwin_make_eh_symbol_indirect): New. Use
Mach-O semantics for personality and ldsa indirections.
* config/darwin.h (TARGET_ASM_MAKE_EH_SYMBOL_INDIRECT): New.
* doc/tm.texi: Regenerate.
* doc/tm.texi.in: Add TARGET_ASM_MAKE_EH_SYMBOL_INDIRECT hook.
* dwarf2out.c (dwarf2out_do_cfi_startproc): If the target defines
a hook for indirecting personality and ldsa references, use that
otherwise default to ELF semantics.
* target.def (make_eh_symbol_indirect): New target hook.
2020-11-11 Patrick Palka <ppalka@redhat.com>
PR c++/88115
* common.opt (-fabi-version): Document =15.
* doc/invoke.texi (C++ Dialect Options): Likewise.
2020-11-11 Marek Polacek <polacek@redhat.com>
PR c++/97518
* tree.c (maybe_wrap_with_location): Don't add a location
wrapper around an artificial and ignored decl.
2020-11-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/97623
* tree-ssa-pre.c (create_expression_by_pieces): Guard
NEW_SETS access.
(insert_into_preds_of_block): Likewise.
2020-11-11 Richard Biener <rguenther@suse.de>
* tree-ssa-pre.c (pre_expr_DFS): New function.
(sorted_array_from_bitmap_set): Use it to properly
topologically sort the expression set.
(clean): Verify we've cleaned everything we should.
2020-11-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/97623
* params.opt (-param=max-pre-hoist-insert-iterations): Remove
again.
* doc/invoke.texi (max-pre-hoist-insert-iterations): Likewise.
* tree-ssa-pre.c (insert): Move hoist insertion after PRE
insertion iteration and do not iterate it.
2020-11-11 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64-sve.md (@vcond_mask_<mode><vpred>): Extend
from SVE_FULL to SVE_ALL.
(*vcond_mask_<mode><vpred>): Likewise.
(@aarch64_sel_dup<mode>): Likewise.
(vcond<SVE_FULL:mode><v_int_equiv>): Extend to...
(vcond<SVE_ALL:mode><SVE_I:mode>): ...this, but requiring the
sizes of the container modes to match.
(vcondu<SVE_FULL:mode><v_int_equiv>): Extend to...
(vcondu<SVE_ALL:mode><SVE_I:mode>): ...this.
(vec_cmp<SVE_FULL_I:mode><vpred>): Extend to...
(vec_cmp<SVE_I:mode><vpred>): ...this.
(vec_cmpu<SVE_FULL_I:mode><vpred>): Extend to...
(vec_cmpu<SVE_I:mode><vpred>): ...this.
(@aarch64_pred_cmp<cmp_op><SVE_FULL_I:mode>): Extend to...
(@aarch64_pred_cmp<cmp_op><SVE_I:mode>): ...this.
(*cmp<cmp_op><SVE_FULL_I:mode>_cc): Extend to...
(*cmp<cmp_op><SVE_I:mode>_cc): ...this.
(*cmp<cmp_op><SVE_FULL_I:mode>_ptest): Extend to...
(*cmp<cmp_op><SVE_I:mode>_ptest): ...this.
(*cmp<cmp_op><SVE_FULL_I:mode>_and): Extend to...
(*cmp<cmp_op><SVE_I:mode>_and): ...this.
2020-11-11 Richard Sandiford <richard.sandiford@arm.com>
* optabs-tree.c (expand_vec_cond_expr_p): Allow the compared values
and the selected values to have different mode sizes.
* gimple-isel.cc (gimple_expand_vec_cond_expr): Likewise.
2020-11-11 Hongtao Liu <hongtao.liu@intel.com>
Hongyu Wang <hongyu.wang@intel.com>
* common/config/i386/cpuinfo.h (get_available_features):
Detect AVXVNNI.
* common/config/i386/i386-common.c
(OPTION_MASK_ISA2_AVXVNNI_SET,
OPTION_MASK_ISA2_AVXVNNI_UNSET): New.
(OPTION_MASK_ISA2_AVX2_UNSET): Add AVXVNNI.
(ix86_hanlde_option): Handle -mavxvnni, unset avxvnni when
avx2 is disabled.
* common/config/i386/i386-cpuinfo.h (enum processor_features):
Add FEATURE_AVXVNNI.
* common/config/i386/i386-isas.h: Add ISA_NAMES_TABLE_ENTRY
for avxvnni.
* config.gcc: Add avxvnniintrin.h.
* config/i386/avx512vnnivlintrin.h: Reimplement 128/256 bit non-mask
intrinsics with macros to support unified interface.
* config/i386/avxvnniintrin.h: New header file.
* config/i386/cpuid.h (bit_AVXVNNI): New.
* config/i386/i386-builtins.c (def_builtin): Handle AVXVNNI mask
for unified builtin.
* config/i386/i386-builtin.def (BDESC): Adjust AVX512VNNI
builtins for AVXVNNI.
* config/i386/i386-c.c (ix86_target_macros_internal): Define
__AVXVNNI__.
* config/i386/i386-expand.c (ix86_expand_builtin): Handle bisa
for AVXVNNI to support unified intrinsic name, since there is no
dependency between AVX512VNNI and AVXVNNI.
* config/i386/i386-options.c (isa2_opts): Add -mavxvnni.
(ix86_valid_target_attribute_inner_p): Handle avxnnni.
(ix86_option_override_internal): Ditto.
* config/i386/i386.h (TARGET_AVXVNNI, TARGET_AVXVNNI_P,
TARGET_AVXVNNI_P, PTA_AVXVNNI): New.
(PTA_SAPPHIRERAPIDS): Add AVX_VNNI.
(PTA_ALDERLAKE): Likewise.
* config/i386/i386.md ("isa"): Add avxvnni, avx512vnnivl.
("enabled"): Adjust for avxvnni and avx512vnnivl.
* config/i386/i386.opt: Add option -mavxvnni.
* config/i386/immintrin.h: Include avxvnniintrin.h.
* config/i386/sse.md (vpdpbusd_<mode>): Adjust for AVXVNNI.
(vpdpbusds_<mode>): Likewise.
(vpdpwssd_<mode>): Likewise.
(vpdpwssds_<mode>): Likewise.
(vpdpbusd_v16si): New.
(vpdpbusds_v16si): Likewise.
(vpdpwssd_v16si): Likewise.
(vpdpwssds_v16si): Likewise.
* doc/invoke.texi: Document -mavxvnni.
* doc/extend.texi: Document avxvnni.
* doc/sourcebuild.texi: Document target avxvnni.
2020-11-11 Martin Liska <mliska@suse.cz>
* tree.c (copy_node): Fix spelling.
2020-11-11 Richard Biener <rguenther@suse.de>
* tree-ssa-pre.c (phi_translate_set): Do not sort the
expression set topologically.
2020-11-11 Aldy Hernandez <aldyh@redhat.com>
* value-range.cc (irange::set): Early exit on VR_VARYING.
2020-11-11 Zhiheng Xie <xiezhiheng@huawei.com>
Nannan Zheng <zhengnannan@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for arithmetic operation intrinsics.
2020-11-11 Strager Neds <strager.nds@gmail.com>
* cgraph.h (symtab_node::set_section_for_node): Declare new
overload.
(symtab_node::set_section_from_string): Rename from set_section.
(symtab_node::set_section_from_node): Declare.
* symtab.c (symtab_node::set_section_for_node): Define new
overload.
(symtab_node::set_section_from_string): Rename from set_section.
(symtab_node::set_section_from_node): Define.
(symtab_node::set_section): Call renamed set_section_from_string.
(symtab_node::set_section): Call new set_section_from_node.
2020-11-11 Strager Neds <strager.nds@gmail.com>
* symtab.c (symtab_node::set_section_for_node): Extract reference
counting logic into ...
(retain_section_hash_entry): ... here (new function) and ...
(release_section_hash_entry): ... here (new function).
2020-11-11 liuhongt <hongtao.liu@intel.com>
* config/i386/i386.h (PTA_MOVDIRI, PTA_MOVDIR64B,
PTA_AMX_TILE, PTA_AMX_INT8, PTA_AMX_BF16, PTA_HRESET):
Formatting.
2020-11-11 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/s390.h (HAVE_TF): Use opaque value when
GENERATOR_FILE is defined.
2020-11-10 Strager Neds <strager.nds@gmail.com>
* cgraph.h (symtab_node::get_section): Constify.
(symtab_node::set_section): Declare new overload.
* symtab.c (symtab_node::set_section): Define new overload.
(symtab_node::copy_visibility_from): Use new overload of
symtab_node::set_section.
(symtab_node::resolve_alias): Same.
* tree.h (set_decl_section_name): Declare new overload.
* tree.c (set_decl_section_name): Define new overload.
* tree-emutls.c (get_emutls_init_templ_addr): Same.
* cgraphclones.c (cgraph_node::create_virtual_clone): Use new
overload of symtab_node::set_section.
(cgraph_node::create_version_clone_with_body): Same.
* trans-mem.c (ipa_tm_create_version): Same.
2020-11-10 Aldy Hernandez <aldyh@redhat.com>
* value-range.cc (irange::set): Early exit for poly ints.
2020-11-10 Tobias Burnus <tobias@codesourcery.com>
* gimplify.c (gimplify_scan_omp_clauses, gimplify_omp_loop): Use 'do'
instead of 'for' in error messages for Fortran.
* omp-low.c (check_omp_nesting_restrictions): Likewise
2020-11-10 Matthew Malcomson <matthew.malcomson@arm.com>
* opts.c (control_options_for_live_patching): Reform 'is incompatible
with' error messages to use a standard message with differing format
arguments.
(finish_options): Likewise.
2020-11-10 Richard Biener <rguenther@suse.de>
PR tree-optimization/97769
* tree-vect-data-refs.c (vect_update_misalignment_for_peel):
Remove assert.
2020-11-10 Richard Biener <rguenther@suse.de>
PR tree-optimization/97780
* tree-ssa-pre.c (fini_pre): Deal with added basic blocks
when freeing PHI_TRANS_TABLE.
2020-11-10 Zhiheng Xie <xiezhiheng@huawei.com>
Nannan Zheng <zhengnannan@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for tbl/tbx intrinsics.
2020-11-10 Chung-Lin Tang <cltang@codesourcery.com>
* gimplify.c (is_or_contains_p): New static helper function.
(omp_target_reorder_clauses): New function.
(gimplify_scan_omp_clauses): Add use of omp_target_reorder_clauses to
reorder clause list according to OpenMP 5.0 rules. Add handling of
GOMP_MAP_ATTACH_DETACH for OpenMP cases.
* omp-low.c (is_omp_target): New static helper function.
(scan_sharing_clauses): Add scan phase handling of GOMP_MAP_ATTACH/DETACH
for OpenMP cases.
(lower_omp_target): Add lowering handling of GOMP_MAP_ATTACH/DETACH for
OpenMP cases.
2020-11-10 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/s390-modes.def (FPRX2): New mode.
* config/s390/s390-protos.h (s390_fma_allowed_p): New function.
* config/s390/s390.c (s390_fma_allowed_p): Likewise.
(s390_build_signbit_mask): Support 128-bit masks.
(print_operand): Support printing the second word of a TFmode
operand as vector register.
(constant_modes): Add FPRX2mode.
(s390_class_max_nregs): Return 1 for TFmode on z14+.
(s390_is_fpr128): New function.
(s390_is_vr128): Likewise.
(s390_can_change_mode_class): Use s390_is_fpr128 and
s390_is_vr128 in order to determine whether mode refers to a FPR
pair or to a VR.
(s390_emit_compare): Force TFmode operands into registers on
z14+.
* config/s390/s390.h (HAVE_TF): New macro.
(EXPAND_MOVTF): New macro.
(EXPAND_TF): Likewise.
* config/s390/s390.md (PFPO_OP_TYPE_FPRX2): PFPO_OP_TYPE_TF
alias.
(ALL): Add FPRX2.
(FP_ALL): Add FPRX2 for z14+, restrict TFmode to z13-.
(FP): Likewise.
(FP_ANYTF): New mode iterator.
(BFP): Add FPRX2 for z14+, restrict TFmode to z13-.
(TD_TF): Likewise.
(xde): Add FPRX2.
(nBFP): Likewise.
(nDFP): Likewise.
(DSF): Likewise.
(DFDI): Likewise.
(SFSI): Likewise.
(DF): Likewise.
(SF): Likewise.
(fT0): Likewise.
(bt): Likewise.
(_d): Likewise.
(HALF_TMODE): Likewise.
(tf_fpr): New mode_attr.
(type): New mode_attr.
(*cmp<mode>_ccz_0): Use type instead of mode with fsimp.
(*cmp<mode>_ccs_0_fastmath): Likewise.
(*cmptf_ccs): New pattern for wfcxb.
(*cmptf_ccsfps): New pattern for wfkxb.
(mov<mode>): Rename to mov<mode><tf_fpr>.
(signbit<mode>2): Rename to signbit<mode>2<tf_fpr>.
(isinf<mode>2): Renamed to isinf<mode>2<tf_fpr>.
(*TDC_insn_<mode>): Use type instead of mode with fsimp.
(fixuns_trunc<FP:mode><GPR:mode>2): Rename to
fixuns_trunc<FP:mode><GPR:mode>2<FP:tf_fpr>.
(fix_trunctf<mode>2): Rename to fix_trunctf<mode>2_fpr.
(floatdi<mode>2): Rename to floatdi<mode>2<tf_fpr>, use type
instead of mode with itof.
(floatsi<mode>2): Rename to floatsi<mode>2<tf_fpr>, use type
instead of mode with itof.
(*floatuns<GPR:mode><FP:mode>2): Use type instead of mode for
itof.
(floatuns<GPR:mode><FP:mode>2): Rename to
floatuns<GPR:mode><FP:mode>2<tf_fpr>.
(trunctf<mode>2): Rename to trunctf<mode>2_fpr, use type instead
of mode with fsimp.
(extend<DSF:mode><BFP:mode>2): Rename to
extend<DSF:mode><BFP:mode>2<BFP:tf_fpr>.
(<FPINT:fpint_name><BFP:mode>2): Rename to
<FPINT:fpint_name><BFP:mode>2<BFP:tf_fpr>, use type instead of
mode with fsimp.
(rint<BFP:mode>2): Rename to rint<BFP:mode>2<BFP:tf_fpr>, use
type instead of mode with fsimp.
(<FPINT:fpint_name><DFP:mode>2): Use type instead of mode for
fsimp.
(rint<DFP:mode>2): Likewise.
(trunc<BFP:mode><DFP_ALL:mode>2): Rename to
trunc<BFP:mode><DFP_ALL:mode>2<BFP:tf_fpr>.
(trunc<DFP_ALL:mode><BFP:mode>2): Rename to
trunc<DFP_ALL:mode><BFP:mode>2<BFP:tf_fpr>.
(extend<BFP:mode><DFP_ALL:mode>2): Rename to
extend<BFP:mode><DFP_ALL:mode>2<BFP:tf_fpr>.
(extend<DFP_ALL:mode><BFP:mode>2): Rename to
extend<DFP_ALL:mode><BFP:mode>2<BFP:tf_fpr>.
(add<mode>3): Rename to add<mode>3<tf_fpr>, use type instead of
mode with fsimp.
(*add<mode>3_cc): Use type instead of mode with fsimp.
(*add<mode>3_cconly): Likewise.
(sub<mode>3): Rename to sub<mode>3<tf_fpr>, use type instead of
mode with fsimp.
(*sub<mode>3_cc): Use type instead of mode with fsimp.
(*sub<mode>3_cconly): Likewise.
(mul<mode>3): Rename to mul<mode>3<tf_fpr>, use type instead of
mode with fsimp.
(fma<mode>4): Restrict using s390_fma_allowed_p.
(fms<mode>4): Restrict using s390_fma_allowed_p.
(div<mode>3): Rename to div<mode>3<tf_fpr>, use type instead of
mode with fdiv.
(neg<mode>2): Rename to neg<mode>2<tf_fpr>.
(*neg<mode>2_cc): Use type instead of mode with fsimp.
(*neg<mode>2_cconly): Likewise.
(*neg<mode>2_nocc): Likewise.
(*neg<mode>2): Likeiwse.
(abs<mode>2): Rename to abs<mode>2<tf_fpr>, use type instead of
mode with fdiv.
(*abs<mode>2_cc): Use type instead of mode with fsimp.
(*abs<mode>2_cconly): Likewise.
(*abs<mode>2_nocc): Likewise.
(*abs<mode>2): Likewise.
(*negabs<mode>2_cc): Likewise.
(*negabs<mode>2_cconly): Likewise.
(*negabs<mode>2_nocc): Likewise.
(*negabs<mode>2): Likewise.
(sqrt<mode>2): Rename to sqrt<mode>2<tf_fpr>, use type instead
of mode with fsqrt.
(cbranch<mode>4): Use FP_ANYTF instead of FP.
(copysign<mode>3): Rename to copysign<mode>3<tf_fpr>, use type
instead of mode with fsimp.
* config/s390/s390.opt (flag_vx_long_double_fma): New
undocumented option.
* config/s390/vector.md (V_HW): Add TF for z14+.
(V_HW2): Likewise.
(VFT): Likewise.
(VF_HW): Likewise.
(V_128): Likewise.
(tf_vr): New mode_attr.
(tointvec): Add TF.
(mov<mode>): Rename to mov<mode><tf_vr>.
(movetf): New dispatcher.
(*vec_tf_to_v1tf): Rename to *vec_tf_to_v1tf_fpr, restrict to
z13-.
(*vec_tf_to_v1tf_vr): New pattern for z14+.
(*fprx2_to_tf): Likewise.
(*mov_tf_to_fprx2_0): Likewise.
(*mov_tf_to_fprx2_1): Likewise.
(add<mode>3): Rename to add<mode>3<tf_vr>.
(addtf3): New dispatcher.
(sub<mode>3): Rename to sub<mode>3<tf_vr>.
(subtf3): New dispatcher.
(mul<mode>3): Rename to mul<mode>3<tf_vr>.
(multf3): New dispatcher.
(div<mode>3): Rename to div<mode>3<tf_vr>.
(divtf3): New dispatcher.
(sqrt<mode>2): Rename to sqrt<mode>2<tf_vr>.
(sqrttf2): New dispatcher.
(fma<mode>4): Restrict using s390_fma_allowed_p.
(fms<mode>4): Likewise.
(neg_fma<mode>4): Likewise.
(neg_fms<mode>4): Likewise.
(neg<mode>2): Rename to neg<mode>2<tf_vr>.
(negtf2): New dispatcher.
(abs<mode>2): Rename to abs<mode>2<tf_vr>.
(abstf2): New dispatcher.
(float<mode>tf2_vr): New forwarder.
(float<mode>tf2): New dispatcher.
(floatuns<mode>tf2_vr): New forwarder.
(floatuns<mode>tf2): New dispatcher.
(fix_trunctf<mode>2_vr): New forwarder.
(fix_trunctf<mode>2): New dispatcher.
(fixuns_trunctf<mode>2_vr): New forwarder.
(fixuns_trunctf<mode>2): New dispatcher.
(<FPINT:fpint_name><VF_HW:mode>2<VF_HW:tf_vr>): New pattern.
(<FPINT:fpint_name>tf2): New forwarder.
(rint<mode>2<tf_vr>): New pattern.
(rinttf2): New forwarder.
(*trunctfdf2_vr): New pattern.
(trunctfdf2_vr): New forwarder.
(trunctfdf2): New dispatcher.
(trunctfsf2_vr): New forwarder.
(trunctfsf2): New dispatcher.
(extenddftf2_vr): New pattern.
(extenddftf2): New dispatcher.
(extendsftf2_vr): New forwarder.
(extendsftf2): New dispatcher.
(signbittf2_vr): New forwarder.
(signbittf2): New dispatchers.
(isinftf2_vr): New forwarder.
(isinftf2): New dispatcher.
* config/s390/vx-builtins.md (*vftci<mode>_cconly): Use VF_HW
instead of VECF_HW, add missing constraint, add vw support.
(vftci<mode>_intcconly): Use VF_HW instead of VECF_HW.
(*vftci<mode>): Rename to vftci<mode>, use VF_HW instead of
VECF_HW, and vw support.
(vftci<mode>_intcc): Use VF_HW instead of VECF_HW.
2020-11-10 Eric Botcazou <ebotcazou@adacore.com>
* range-op.cc (operator_logical_not::fold_range): Tidy up.
(operator_logical_not::op1_range): Call above method.
(operator_bitwise_not::fold_range): If the type is compatible
with boolean, call op_logical_not.fold_range.
(operator_bitwise_not::op1_range): If the type is compatible
with boolean, call op_logical_not.op1_range.
2020-11-10 Richard Biener <rguenther@suse.de>
* tree-ssa-pre.c (pre_expr_d::value_id): Add.
(constant_value_expressions): Turn into an array of pre_expr.
(get_or_alloc_expr_for_nary): New function.
(get_or_alloc_expr_for_reference): Likewise.
(add_to_value): For constant values only ever add a single
CONSTANT.
(get_expr_value_id): Return the new value_id member.
(vn_valnum_from_value_id): Split out and simplify constant
value id handling.
(get_or_alloc_expr_for_constant): Set the value_id member.
(phi_translate_1): Use get_or_alloc_expr_for_*.
(compute_avail): Likewise.
(bitmap_find_leader): Simplify constant value id handling.
2020-11-10 Alex Coplan <alex.coplan@arm.com>
* doc/md.texi (Modifiers): Fix grammar in description of
earlyclobber constraint modifier.
2020-11-10 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97764
* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): For
little-endian stores with negative pd.offset, subtract
BITS_PER_UNIT - amnt from size if amnt is non-zero.
2020-11-10 Richard Biener <rguenther@suse.de>
PR tree-optimization/97760
* tree-vect-loop.c (check_reduction_path): Reject
reduction paths we do not handle in epilogue generation.
2020-11-10 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97767
* value-range.cc (dump_bound_with_infinite_markers): Use
wi::min_value and wi::max_value.
(range_tests_strict_enum): New.
(range_tests): Call range_tests_strict_enum.
* value-range.h (irange::varying_p): Use wi::min_value
and wi::max_value.
(irange::set_varying): Same.
(irange::normalize_min_max): Remove comment.
2020-11-10 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97567
* gimple-range-gori.cc: (gori_compute::logical_combine): False
OR operations should intersect the 2 results.
(gori_compute::compute_logical_operands_in_chain): If def chains
are outside the current basic block, don't follow them.
2020-11-09 Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.c (arc_split_move): Recognize vadd2 instructions.
* config/arc/arc.md (movdi_insn): Update pattern to use vadd2
instructions.
(movdf_insn): Likewise.
(maddhisi4): New pattern.
(umaddhisi4): Likewise.
* config/arc/simdext.md (mov<mode>_int): Update pattern to use
vadd2.
(sdot_prodv4hi): New pattern.
(udot_prodv4hi): Likewise.
(arc_vec_<V_US>mac_hi_v4hi): Update/renamed to
arc_vec_<V_US>mac_v2hiv2si.
(arc_vec_<V_US>mac_v2hiv2si_zero): New pattern.
* config/arc/constraints.md (Ral): Accumulator register
constraint.
2020-11-09 Aldy Hernandez <aldyh@redhat.com>
* function-tests.c (test_ranges): Call range_op_tests.
* range-op.cc (build_range3): Move to value-range.cc.
(range3_tests): Same.
(int_range_max_tests): Same.
(multi_precision_range_tests): Same.
(range_tests): Same.
(operator_tests): Split up...
(range_op_tests): Split up...
(range_op_cast_tests): ...here.
(range_op_lshift_tests): ...here.
(range_op_rshift_tests): ...here.
(range_op_bitwise_and_tests): ...here.
* selftest.h (range_op_tests): New.
* value-range.cc (build_range3): New.
(range_tests_irange3): New.
(range_tests_int_range_max): New.
(range_tests_legacy): New.
(range_tests_misc): New.
(range_tests): New.
2020-11-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/97761
* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): Remove
premature end of DFS walk.
2020-11-09 Aldy Hernandez <aldyh@redhat.com>
* value-range.cc (irange::swap_out_of_order_endpoints): Rewrite
into static function.
(irange::set): Cleanup redundant manipulations.
* value-range.h (irange::normalize_min_max): Modify object
in-place instead of modifying arguments.
2020-11-09 Andrea Corallo <andrea.corallo@arm.com>
* config/aarch64/aarch64-builtins.c
(aarch64_expand_fcmla_builtin): Do not alter force_reg returned
register.
2020-11-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/97753
* tree-vect-loop.c (vectorizable_induction): Fill vec_steps
when CSEing inside the group.
2020-11-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/97746
* tree-vect-patterns.c (vect_determine_precisions): First walk PHIs.
2020-11-09 Richard Biener <rguenther@suse.de>
* tree-ssa-pre.c (get_representative_for): CSE VN_INFO calls.
(create_expression_by_pieces): Likewise.
(insert_into_preds_of_block): Likewsie.
(do_pre_regular_insertion): Likewsie.
* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_insert):
Likewise.
(eliminate_dom_walker::eliminate_stmt): Likewise.
2020-11-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/97765
* tree-ssa-pre.c (bb_bitmap_sets::phi_translate_table): Add.
(PHI_TRANS_TABLE): New macro.
(phi_translate_table): Remove.
(expr_pred_trans_d::pred): Remove.
(expr_pred_trans_d::hash): Simplify.
(expr_pred_trans_d::equal): Likewise.
(phi_trans_add): Adjust.
(phi_translate): Likewise. Remove hash-table expansion
detection and optimization.
(phi_translate_set): Allocate PHI_TRANS_TABLE here.
(init_pre): Adjsust.
(fini_pre): Free PHI_TRANS_TABLE.
2020-11-09 Lili Cui <lili.cui@intel.com>
PR target/97685
* config/i386/i386.h:
(PTA_BROADWELL): Delete PTA_PRFCHW.
(PTA_SILVERMONT): Add PTA_PRFCHW.
(PTA_KNL): Add PTA_PREFETCHWT1.
(PTA_TREMONT): Add PTA_MOVDIRI, PTA_MOVDIR64B, PTA_CLDEMOTE and PTA_WAITPKG.
* doc/invoke.texi: Delete PREFETCHW for broadwell, skylake, knl, knm,
skylake-avx512, cannonlake, icelake-client, icelake-server, cascadelake,
cooperlake, tigerlake and sapphirerapids.
Add PREFETCHW for silvermont, goldmont, goldmont-plus and tremont.
Add XSAVEC and XSAVES for goldmont, goldmont-plus and tremont.
Add MOVDIRI, MOVDIR64B, CLDEMOTE and WAITPKG for tremont.
Add KEYLOCKER and HREST for alderlake.
Add AMX-BF16, AMX-TILE, AMX-INT8 and UINTR for sapphirerapids.
Add KEYLOCKER for tigerlake.
2020-11-09 Kewen Lin <linkw@linux.ibm.com>
PR rtl-optimization/97705
* ira.c (ira): Refactor some regstat free/init/compute invocation
into lambda function regstat_recompute_for_max_regno, and call it
when max_regno increases as remove_scratches succeeds.
2020-11-08 David Edelsohn <dje.gcc@gmail.com>
* config/rs6000/rs6000.c (rs6000_mangle_decl_assembler_name): Change
DECL_IS_BUILTIN -> DECL_IS_UNDECLARED_BUILTIN.
2020-11-07 Martin Uecker <muecker@gwdg.de>
* doc/extend.texi: Document mixing labels and code.
* doc/invoke.texi: Likewise.
2020-11-06 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/rs6000.md (@tablejump<mode>_normal): Don't abuse
operands[].
(@tablejump<mode>_nospec): Ditto.
2020-11-06 Peter Bergner <bergner@linux.ibm.com>
* config/rs6000/rs6000.h (BIGGEST_ALIGNMENT): Revert previous commit
so as not to break the ABI.
* config/rs6000/rs6000-call.c (rs6000_init_builtins): Set the ABI
mandated alignment for __vector_pair and __vector_quad types.
2020-11-06 Jeff Law <law@torsion.usersys.redhat.com>
PR target/91489
* config/i386/i386.md (simple_return): Also check
for ms_hook_prologue function attribute.
* config/i386/i386.c (ix86_can_use_return_insn_p):
Also check for ms_hook_prologue function attribute.
* config/i386/i386-protos.h (ix86_function_ms_hook_prologue): Declare.
2020-11-06 Segher Boessenkool <segher@kernel.crashing.org>
PR target/96933
* config/rs6000/rs6000.c (rs6000_expand_vector_init): Use
TARGET_POWERPC64 instead of TARGET_64BIT.
2020-11-06 Joseph Myers <joseph@codesourcery.com>
* builtins.def (BUILT_IN_NANSD32, BUILT_IN_NANSD64)
(BUILT_IN_NANSD128): New built-in functions.
* fold-const-call.c (fold_const_call): Handle the new built-in
functions.
* doc/extend.texi (__builtin_nansd32, __builtin_nansd64)
(__builtin_nansd128): Document.
* doc/sourcebuild.texi (Effective-Target Keywords): Document
fenv_exceptions_dfp.
2020-11-06 Bin Cheng <bin.cheng@linux.alibaba.com>
* tree-ssa-uninit.c (find_var_cmp_const): New function.
(use_pred_not_overlap_with_undef_path_pred): Call above.
2020-11-06 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-c.c: Allow for Darwin20 to correspond to macOS 11.
* config/darwin-driver.c: Likewise.
2020-11-06 Richard Biener <rguenther@suse.de>
* tree-ssa-pre.c (expr_pred_trans_d): Modify so elements
are embedded rather than allocated. Remove hashval member,
make all members integers.
(phi_trans_add): Adjust accordingly.
(phi_translate): Likewise. Deal with re-allocation
of the table.
2020-11-06 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97737
PR tree-optimization/97741
* gimple-range.cc: (gimple_ranger::range_of_stmt): Intersect newly
calculated ranges with the existing known global range.
2020-11-06 Darius Galis <darius.galis@cyberthorstudios.com>
* config/rx/rx.md (CTRLREG_PC): Add.
* config/rx/rx.c (CTRLREG_PC): Add
(rx_expand_builtin_mvtc): Add warning: PC register cannot
be used as dest.
2020-11-06 Nathan Sidwell <nathan@acm.org>
* tree.h (DECL_IS_BUILTIN): Rename to ...
(DECL_IS_UNDECLARED_BUILTIN): ... here. No need to use SOURCE_LOCUS.
* calls.c (maybe_warn_alloc_args_overflow): Adjust for rename.
* cfgexpand.c (pass_expand::execute): Likewise.
* dwarf2out.c (base_type_die, is_naming_typedef_decl): Likewise.
* godump.c (go_decl, go_type_decl): Likewise.
* print-tree.c (print_decl_identifier): Likewise.
* tree-pretty-print.c (dump_generic_node): Likewise.
* tree-ssa-ccp.c (pass_post_ipa_warn::execute): Likewise.
* xcoffout.c (xcoff_assign_fundamental_type_number): Likewise.
2020-11-06 David Candler <david.candler@arm.com>
* config/aarch64/aarch64-builtins.c
(TYPES_SHIFT2IMM): Add define.
(TYPES_SHIFT2IMM_UUSS): Add define.
(TYPES_USHIFT2IMM): Add define.
* config/aarch64/aarch64-simd.md
(aarch64_<sur>q<r>shr<u>n2_n<mode>): Add new insn for upper saturating shift right.
* config/aarch64/aarch64-simd-builtins.def: Add intrinsics.
* config/aarch64/arm_neon.h:
(vqrshrn_high_n_s16): Expand using intrinsic rather than inline asm.
(vqrshrn_high_n_s32): Likewise.
(vqrshrn_high_n_s64): Likewise.
(vqrshrn_high_n_u16): Likewise.
(vqrshrn_high_n_u32): Likewise.
(vqrshrn_high_n_u64): Likewise.
(vqrshrun_high_n_s16): Likewise.
(vqrshrun_high_n_s32): Likewise.
(vqrshrun_high_n_s64): Likewise.
(vqshrn_high_n_s16): Likewise.
(vqshrn_high_n_s32): Likewise.
(vqshrn_high_n_s64): Likewise.
(vqshrn_high_n_u16): Likewise.
(vqshrn_high_n_u32): Likewise.
(vqshrn_high_n_u64): Likewise.
(vqshrun_high_n_s16): Likewise.
(vqshrun_high_n_s32): Likewise.
(vqshrun_high_n_s64): Likewise.
2020-11-06 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64-modes.def (VNx2BF, VNx4BF): Adjust nunits
and alignment based on the current VG.
* config/aarch64/iterators.md (SVE_ALL, SVE_24, SVE_2, SVE_4): Add
partial SVE BF modes.
(UNSPEC_REVBHW): New unspec.
(Vetype, Vesize, Vctype, VEL, Vel, vwcore, V_INT_CONTAINER)
(v_int_container, VPRED, vpred): Handle partial SVE BF modes.
(container_bits, Vcwtype): New mode attributes.
* config/aarch64/aarch64-sve.md
(@aarch64_sve_revbhw_<SVE_ALL:mode><PRED_HSD:mode>): New pattern.
(@aarch64_sve_dup_lane<mode>): Extended from SVE_FULL to SVE_ALL.
(@aarch64_sve_rev<mode>, @aarch64_sve_<perm_insn><mode>): Likewise.
(@aarch64_sve_ext<mode>): Likewise.
* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Handle
E_VNx2BFmode and E_VNx4BFmode.
(aarch64_evpc_rev_local): Base the analysis on the container size
instead of the element size. Use the new aarch64_sve_revbhw
patterns for SVE.
(aarch64_evpc_dup): Handle partial SVE data modes. Use the
container size instead of the element size when applying the
SVE immediate limit. Fix a previously incorrect bounds check.
(aarch64_expand_vec_perm_const_1): Handle partial SVE data modes.
2020-11-06 Martin Liska <mliska@suse.cz>
* common.opt: Add new -fbit-tests option.
* doc/invoke.texi: Document the option.
* tree-switch-conversion.c (bit_test_cluster::find_bit_tests):
Use the option.
* tree-switch-conversion.h (is_enabled): New function.
2020-11-06 Richard Biener <rguenther@suse.de>
* tree-ssa-sccvn.h (get_max_constant_value_id): Declare.
(get_next_constant_value_id): Likewise.
(value_id_constant_p): Inline and simplify.
* tree-ssa-sccvn.c (constant_value_ids): Remove.
(next_constant_value_id): Add.
(get_or_alloc_constant_value_id): Adjust.
(value_id_constant_p): Remove definition.
(get_max_constant_value_id): Define.
(get_next_value_id): Add assert for overflow.
(get_next_constant_value_id): Define.
(run_rpo_vn): Adjust.
(free_rpo_vn): Likewise.
(do_rpo_vn): Initialize next_constant_value_id.
* tree-ssa-pre.c (constant_value_expressions): New.
(add_to_value): Split into constant/non-constant value
handling. Avoid exact re-allocation.
(vn_valnum_from_value_id): Adjust.
(phi_translate_1): Remove spurious exact re-allocation.
(bitmap_find_leader): Adjust. Make sure we return
a CONSTANT value for a constant value id.
(do_pre_regular_insertion): Use 2 auto-elements for avail.
(do_pre_partial_partial_insertion): Likewise.
(init_pre): Allocate constant_value_expressions.
(fini_pre): Release constant_value_expressions.
2020-11-06 Richard Biener <rguenther@suse.de>
PR tree-optimization/97706
* tree-vect-patterns.c (possible_vector_mask_operation_p):
PHIs are possible mask operations.
(vect_determine_mask_precision): Handle PHIs.
(vect_determine_precisions): Walk PHIs in BB analysis.
2020-11-06 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_analyze_slp): Pass down the
SLP graph entry kind.
(vect_analyze_slp_instance): Simplify.
(vect_build_slp_instance): Adjust.
(vect_slp_check_for_constructors): Perform more
eligibility checks here.
2020-11-06 Jan Hubicka <jh@suse.cz>
* ipa-ref.h (enum ipa_ref_use): Remove GTY marker.
(struct ipa_ref): Remove GTY marker; reorder for better packing.
(struct ipa_ref_list): Remove GTY marker; turn references
nad referring to va_heap, vl_ptr vectors; update accesors.
* cgraph.h (symtab_node::iterate_reference): Update.
* ipa-ref.c (ipa_ref::remove_reference): Update.
* symtab.c (symtab_node::create_reference): Update.
(symtab_node::remove_all_references): Update.
(symtab_node::resolve_alias): Update.
2020-11-06 Jakub Jelinek <jakub@redhat.com>
* ipa-modref-tree.h: Fix comment typos.
* ipa-modref.c: Likewise.
2020-11-06 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/s390.c (s390_option_override_internal): Remove
override of inline params.
2020-11-06 Richard Biener <rguenther@suse.de>
PR tree-optimization/97706
* tree-vect-patterns.c (vect_determine_mask_precision):
Remove worklist operation.
(vect_determine_stmt_precisions): Do not call
vect_determine_mask_precision here.
(vect_determine_precisions): Compute mask precision
in a forward walk.
2020-11-06 Richard Biener <rguenther@suse.de>
PR tree-optimization/97732
* tree-vect-loop.c (vectorizable_induction): Convert the
init elements to the vector component type.
* gimple-fold.c (gimple_build_vector): Use CONSTANT_CLASS_P
rather than TREE_CONSTANT to determine if elements are
eligible for VECTOR_CSTs.
2020-11-06 Jan Hubicka <jh@suse.cz>
* attr-fnspec.h (attr_fnspec::get_str): New accessor
* ipa-fnsummary.c (read_ipa_call_summary): Store also parm info
for builtins.
* ipa-modref.c (class fnspec_summary): New type.
(class fnspec_summaries_t): New type.
(modref_summary::modref_summary): Initialize writes_errno.
(struct modref_summary_lto): Add writes_errno.
(modref_summary_lto::modref_summary_lto): Initialize writes_errno.
(modref_summary::dump): Check for NULL pointers.
(modref_summary_lto::dump): Dump writes_errno.
(collapse_loads): Move up in source file.
(collapse_stores): New function.
(process_fnspec): Handle also internal calls.
(analyze_call): Likewise.
(analyze_stmt): Store fnspec string if needed.
(analyze_function): Initialize fnspec_sumarries.
(modref_summaries_lto::duplicate): Copy writes_errno.
(modref_write): Store writes_errno and fnspec summaries.
(read_section): Read writes_errno and fnspec summaries.
(modref_read): Initialize fnspec summaries.
(update_signature): Fix formating.
(compute_parm_map): Return true if sucessful.
(get_parm_type): New function.
(get_access_for_fnspec): New function.
(propagate_unknown_call): New function.
(modref_propagate_in_scc): Use it.
(pass_ipa_modref::execute): Delete fnspec_summaries.
(ipa_modref_c_finalize): Delete fnspec_summaries.
* ipa-prop.c: Include attr-fnspec.h.
(ipa_compute_jump_functions_for_bb): Also compute jump functions
for functions with fnspecs.
(ipa_read_edge_info): Read jump functions for builtins.
2020-11-06 Jan Hubicka <jh@suse.cz>
* ipa-fnsummary.h (class size_time_entry): Do not GTY annotate.
(class ipa_fnsummary): Turn size_time_table to auto_vec and
call_size_time_table to effecient vec; update constructors.
* ipa-fnsummary.c (ipa_fn_summary::account_size_time): Update.
(ipa_fn_summary::~ipa_fn_summary): Update.
(ipa_fn_summary_t::duplicate): Update.
(ipa_dump_fn_summary): Update.
(set_switch_stmt_execution_predicate): Update.
(analyze_function_body): Update.
(estimate_calls_size_and_time): Update.
(ipa_call_context::estimate_size_and_time): Update.
(ipa_merge_fn_summary_after_inlining): Update.
(ipa_update_overall_fn_summary): Update.
(inline_read_section): Update.
(ipa_fn_summary_write): Update.
2020-11-06 Richard Biener <rguenther@suse.de>
PR tree-optimization/97733
* tree-vect-slp.c (vect_analyze_slp_instance): If less
than two reductions were relevant or live do nothing.
2020-11-06 Jeff Law <law@redhat.com>
PR tree-optimization/97223
* match.pd (overflow detection and optimization): Handle conversions.
2020-11-06 Eugene Rozenfeld <erozen@microsoft.com>
* match.pd (x >> x): New pattern.
2020-11-06 Kito Cheng <kito.cheng@sifive.com>
* common/config/riscv/riscv-common.c (riscv_implied_info):
Add static and const.
(riscv_subset_list::handle_implied_ext): Add const due to
riscv_implied_info changed to const.
2020-11-06 Kito Cheng <kito.cheng@sifive.com>
PR target/96307
* toplev.c (process_options): Remove param_asan_stack checking for kasan
option checking.
2020-11-05 Marek Polacek <polacek@redhat.com>
PR c++/97675
* doc/invoke.texi: Document -Wexceptions.
2020-11-05 Marek Polacek <polacek@redhat.com>
PR c++/25814
* doc/invoke.texi: Document -Wvexing-parse.
2020-11-05 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97725
* range-op.cc (operator_equal::fold_range): Use new tmp value.
(operator_not_equal::fold_range): Ditto.
* value-query.cc (range_query::value_of_expr): Use int_range_max
not a value_range.
(range_query::value_on_edge): Ditto.
(range_query::value_of_stmt): Ditto.
2020-11-05 Olivier Hainque <hainque@adacore.com>
* config/aarch64/aarch64-vxworks.h (TARGET_OS_USES_R18):
Remove definition.
(STATIC_CHAIN_REGNUM): Redefine to 9.
2020-11-05 Olivier Hainque <hainque@adacore.com>
* config/aarch64/aarch64.md: Define PROBE_STACK_FIRST_REGNUM
and PROBE_STACK_SECOND_REGNUM constants, designating r10/r11.
Replacements for the PROBE_STACK_FIRST/SECOND_REG constants in
aarch64.c.
* config/aarch64/aarch64.c (PROBE_STACK_FIRST_REG): Remove.
(PROBE_STACK_SECOND_REG): Remove.
(aarch64_emit_probe_stack_range): Adjust to the _REG -> _REGNUM
suffix update for PROBE_STACK register numbers.
2020-11-05 Jan Hubicka <jh@suse.cz>
* gimple.c (gimple_call_fnspec): Handle C++ new and delete.
* gimple.h (gimple_call_from_new_or_delete): Constify parameter.
2020-11-05 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97721
* gimple-range.cc (get_tree_range): Drop overflow from constants.
2020-11-05 David Malcolm <dmalcolm@redhat.com>
* tree-diagnostic-path.cc (struct path_summary::event_range): Move
out of path_summary to...
(struct event_range): ...here.
(class path_summary): Convert to...
(struct path_summary): ...this.
(path_summary::m_ranges): Drop "private".
(path_summary::print): Convert to...
(print_path_summary_as_text): ...this, passing in the path_summary
explicitly.
(default_tree_diagnostic_path_printer): Update for above change.
(selftest::test_empty_path): Likewise.
(selftest::test_intraprocedural_path): Likewise.
(selftest::test_interprocedural_path_1): Likewise.
(selftest::test_interprocedural_path_2): Likewise.
(selftest::test_recursion): Likewise.
2020-11-05 qing zhao <qinzhao@gcc.gnu.org>
PR target/97715
* config/i386/i386.c (zero_all_st_registers): Return
earlier when the FPU is disabled.
2020-11-05 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (parm_map_for_arg): Initialize parm_offset and
parm_offset_knonw.
(read_section): Set writes_errno to false.
2020-11-05 Richard Biener <rguenther@suse.de>
* tree-vect-data-refs.c (vect_slp_analyze_node_dependences):
Use the original stmts.
(vect_slp_analyze_node_alignment): Use the pattern stmt.
* tree-vect-slp.c (vect_fixup_store_groups_with_patterns):
New function.
(vect_slp_analyze_bb_1): Call it.
2020-11-05 Tamar Christina <tamar.christina@arm.com>
* tree-vect-slp.c (vect_slp_tree_permute_noop_p): New.
(vect_optimize_slp): Optimize permutes.
(vectorizable_slp_permutation): Fix typo.
2020-11-05 Richard Biener <rguenther@suse.de>
PR debug/97718
* dwarf2out.c (add_abstract_origin_attribute): Make sure to
point to the abstract instance.
2020-11-05 Tamar Christina <tamar.christina@arm.com>
* tree-vect-loop.c (vect_analyze_loop_2): Check kind.
* tree-vect-slp.c (vect_build_slp_instance): New.
(enum slp_instance_kind): Move to...
* tree-vectorizer.h (enum slp_instance_kind): .. Here
(SLP_INSTANCE_KIND): New.
2020-11-05 Kewen Lin <linkw@linux.ibm.com>
PR target/96933
* config/rs6000/rs6000.c (rs6000_expand_vector_init): Use direct move
instructions for vector construction with char/short types.
* config/rs6000/rs6000.md (p8_mtvsrwz_v16qisi2): New define_insn.
(p8_mtvsrd_v16qidi2): Likewise.
2020-11-04 Tamar Christina <tamar.christina@arm.com>
* tree-vect-slp.c (vect_analyze_slp_instance): Moved load/store lanes
check to ...
* tree-vect-loop.c (vect_analyze_loop_2): ..Here
2020-11-04 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/s390.c (NR_C_MODES): Unhardcode.
(s390_alloc_pool): Use size_t for iterating from 0 to
NR_C_MODES.
(s390_add_constant): Likewise.
(s390_find_constant): Likewise.
(s390_dump_pool): Likewise.
(s390_free_pool): Likewise.
2020-11-04 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/s390.md (RRe): Remove.
(RXe): Remove.
2020-11-04 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97515
* gimple-range-cache.h (class ranger_cache): New prototypes plus
temporal cache pointer.
* gimple-range-cache.cc (struct range_timestamp): New.
(class temporal_cache): New.
(temporal_cache::temporal_cache): New.
(temporal_cache::~temporal_cache): New.
(temporal_cache::get_timestamp): New.
(temporal_cache::set_dependency): New.
(temporal_cache::temporal_value): New.
(temporal_cache::current_p): New.
(temporal_cache::set_timestamp): New.
(temporal_cache::set_always_current): New.
(ranger_cache::ranger_cache): Allocate the temporal cache.
(ranger_cache::~ranger_cache): Free temporal cache.
(ranger_cache::get_non_stale_global_range): New.
(ranger_cache::set_global_range): Add a timestamp.
(ranger_cache::register_dependency): New. Add timestamp dependency.
* gimple-range.cc (gimple_ranger::range_of_range_op): Add operand
dependencies.
(gimple_ranger::range_of_phi): Ditto.
(gimple_ranger::range_of_stmt): Check if global range is stale, and
recalculate if so.
2020-11-04 Tobias Burnus <tobias@codesourcery.com>
* targhooks.c (default_zero_call_used_regs): Fix flag-name typo
in sorry.
2020-11-04 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (vectorizable_phi): Adjust prototype.
* tree-vect-stmts.c (vect_transform_stmt): Adjust.
(vect_analyze_stmt): Pass cost_vec to vectorizable_phi.
* tree-vect-loop.c (vectorizable_phi): Do costing.
2020-11-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/97709
* tree-vect-loop.c (vectorizable_live_operation): Set
SSA_NAME_OCCURS_IN_ABNORMAL_PHI when necessary.
2020-11-04 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97690
* tree-ssa-phiopt.c (conditional_replacement): Also optimize
cond ? pow2p_cst : 0 as ((type) cond) << cst.
2020-11-04 Richard Biener <rguenther@suse.de>
* tree-vect-loop.c (vectorizable_induction): Re-instantiate
previously removed CSE of SLP IVs.
2020-11-04 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-options.c (ix86_recompute_optlev_based_flags):
Fix Intel MCU psABI comment w.r.t DEFAULT_PCC_STRUCT_RETURN.
2020-11-04 Richard Biener <rguenther@suse.de>
PR bootstrap/97666
* tree-vect-slp.c (vect_build_slp_tree_2): Revert previous
fix and instead adjust the memset.
2020-11-04 Pat Bernardi <bernardi@adacore.com>
* config/i386/i386elf.h (SUBTARGET_RETURN_IN_MEMORY): Remove.
(ASM_OUTPUT_ASCII): Likewise.
(DEFAULT_PCC_STRUCT_RETURN): Define.
* config/i386/i386.c (ix86_return_in_memory): Remove
SUBTARGET_RETURN_IN_MEMORY.
2020-11-04 liuhongt <hongtao.liu@intel.com>
PR target/97540
* ira.c: (ira_setup_alts): Extract memory from operand only
for special memory constraint.
* recog.c (asm_operand_ok): Ditto.
* lra-constraints.c (process_alt_operands): MEM_P is
required for normal memory constraint.
2020-11-04 liuhongt <hongtao.liu@intel.com>
PR target/97532
* lra-constraints.c (valid_address_p): Handle operand of
special memory constraint.
(process_address_1): Ditto.
2020-11-03 Jan Hubicka <hubicka@ucw.cz>
PR ipa/97695
* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Fix ICE with
in dumping code.
(cgraph_node::remove): Save clone info before releasing it and pass it
to unregister.
* cgraph.h (symtab_node::unregister): Add clone_info parameter.
(cgraph_clone::unregister): Likewise.
* cgraphclones.c (cgraph_node::find_replacement): Copy clone info
* symtab-clones.cc (clone_infos_t::duplicate): Remove.
(clone_info::get_create): Simplify.
* symtab.c (symtab_node::unregister): Pass around clone info.
* varpool.c (varpool_node::remove): Update.
2020-11-03 Thomas Schwinge <thomas@codesourcery.com>
* omp-low.c (scan_omp_for) <OpenACC>: Use proper location to
'inform' of enclosing parent compute construct.
2020-11-03 Jan Hubicka <hubicka@ucw.cz>
PR ipa/97698
* cgraphclones.c (duplicate_thunk_for_node): Check that info is
non-NULL.
2020-11-03 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386.c (ix86_function_arg_regno_p): Use up to
SSE_REGPARM_MAX registers to pass function parameters
for 32bit Mach-O targets.
* config/i386/i386.h (X86_32_MMX_REGPARM_MAX): New macro.
(MMX_REGPARM_MAX): Use it.
2020-11-03 Dennis Zhang <dennis.zhang@arm.com>
* config/aarch64/aarch64-simd-builtins.def (vget_lo_half): New entry.
(vget_hi_half): Likewise.
* config/aarch64/aarch64-simd.md (aarch64_vget_lo_halfv8bf): New entry.
(aarch64_vget_hi_halfv8bf): Likewise.
* config/aarch64/arm_neon.h (vget_low_bf16): New intrinsic.
(vget_high_bf16): Likewise.
2020-11-03 Yang Yang <yangyang305@huawei.com>
* cgraph.h (struct cgraph_simd_clone): Change field "simdlen" of
struct cgraph_simd_clone from unsigned int to poly_uint64.
* config/aarch64/aarch64.c
(aarch64_simd_clone_compute_vecsize_and_simdlen): adaptation of
operations on "simdlen".
* config/i386/i386.c (ix86_simd_clone_compute_vecsize_and_simdlen):
Printf formats update.
* gengtype.c (main): Handle poly_uint64.
* omp-simd-clone.c (simd_clone_mangle): Likewise.Re
(simd_clone_adjust_return_type): Likewise.
(create_tmp_simd_array): Likewise.
(simd_clone_adjust_argument_types): Likewise.
(simd_clone_init_simd_arrays): Likewise.
(ipa_simd_modify_function_body): Likewise.
(simd_clone_adjust): Likewise.
(expand_simd_clones): Likewise.
* poly-int-types.h (vector_unroll_factor): New macro.
* poly-int.h (constant_multiple_p): Add two-argument versions.
* tree-vect-stmts.c (vectorizable_simd_clone_call): Likewise.
2020-11-03 Richard Biener <rguenther@suse.de>
PR tree-optimization/97623
* params.opt (-param=max-pre-hoist-insert-iterations): New.
* doc/invoke.texi (max-pre-hoist-insert-iterations): Document.
* tree-ssa-pre.c (insert): Do at most max-pre-hoist-insert-iterations
hoist insert iterations.
2020-11-03 Richard Biener <rguenther@suse.de>
PR middle-end/97579
* gimple-isel.cc (gimple_expand_vec_cond_expr): Use
the correct types for the vcond_mask/vec_cmp optab queries.
2020-11-03 Andrew MacLeod <amacleod@redhat.com>
* gimple-range-cache.cc (ssa_global_cache::get_global_range): Return
true if there was a previous range set.
(ranger_cache::ranger_cache): Take a gimple_ranger parameter.
(ranger_cache::set_global_range): Propagate the value if updating.
(ranger_cache::propagate_cache): Renamed from iterative_cache_update.
(ranger_cache::propagate_updated_value): New. Split from:
(ranger_cache::fill_block_cache): Split out value propagator.
* gimple-range-cache.h (ssa_global_cache): Update prototypes.
(ranger_cache): Update prototypes.
2020-11-03 Andrew MacLeod <amacleod@redhat.com>
* gimple-range-cache.h (block_range_cache): Add new entry point.
(ranger_cache): Privatize global abnd block cache members.
* gimple-range-cache.cc (ssa_block_ranges::set_bb_range): Add bounds
check.
(ssa_block_ranges::set_bb_varying): Ditto.
(ssa_block_ranges::get_bb_range): Ditto.
(ssa_block_ranges::bb_range_p): Ditto.
(block_range_cache::get_block_ranges): Fix formatting.
(block_range_cache::query_block_ranges): New.
(block_range_cache::get_bb_range): Use Query_block_ranges.
(block_range_cache::bb_range_p): Ditto.
(ranger_cache::dump): New.
(ranger_cache::get_global_range): New.
(ranger_cache::set_global_range): New.
* gimple-range.cc (gimple_ranger::range_of_expr): Use new API.
(gimple_ranger::range_of_stmt): Ditto.
(gimple_ranger::export_global_ranges): Ditto.
(gimple_ranger::dump): Ditto.
2020-11-03 Bernd Edlinger <bernd.edlinger@hotmail.de>
* fold-const.c (getbyterep): Remove duplicated statement.
2020-11-03 Bernd Edlinger <bernd.edlinger@hotmail.de>
PR target/97205
* cfgexpand.c (align_local_variable): Make SSA_NAMEs
at least MODE_ALIGNED.
(expand_one_stack_var_at): Increase MEM_ALIGN for SSA_NAMEs.
2020-11-03 Zhiheng Xie <xiezhiheng@huawei.com>
Nannan Zheng <zhengnannan@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for AES/SHA/SM3/SM4 intrinsics.
2020-11-03 Zhiheng Xie <xiezhiheng@huawei.com>
Nannan Zheng <zhengnannan@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for compare intrinsics.
2020-11-03 Richard Biener <rguenther@suse.de>
* dwarf2out.c (maybe_create_die_with_external_ref): Remove
hashtable entry.
2020-11-03 Andrea Corallo <andrea.corallo@arm.com>
* config/arm/arm_neon.h (vst2_lane_bf16, vst2q_lane_bf16)
(vst3_lane_bf16, vst3q_lane_bf16, vst4_lane_bf16)
(vst4q_lane_bf16): New intrinsics.
* config/arm/arm_neon_builtins.def: Touch it for:
__builtin_neon_vst2_lanev4bf, __builtin_neon_vst2_lanev8bf,
__builtin_neon_vst3_lanev4bf, __builtin_neon_vst3_lanev8bf,
__builtin_neon_vst4_lanev4bf,__builtin_neon_vst4_lanev8bf.
2020-11-03 Andrea Corallo <andrea.corallo@arm.com>
* config/arm/arm_neon.h (vld2_lane_bf16, vld2q_lane_bf16)
(vld3_lane_bf16, vld3q_lane_bf16, vld4_lane_bf16)
(vld4q_lane_bf16): Add intrinsics.
* config/arm/arm_neon_builtins.def: Touch for:
__builtin_neon_vld2_lanev4bf, __builtin_neon_vld2_lanev8bf,
__builtin_neon_vld3_lanev4bf, __builtin_neon_vld3_lanev8bf,
__builtin_neon_vld4_lanev4bf, __builtin_neon_vld4_lanev8bf.
* config/arm/iterators.md (VQ_HS): Add V8BF to the iterator.
2020-11-03 Andrea Corallo <andrea.corallo@arm.com>
* config/arm/arm_neon.h (vst1_bf16, vst1q_bf16): Add intrinsics.
* config/arm/arm_neon_builtins.def : Touch for:
__builtin_neon_vst1v4bf, __builtin_neon_vst1v8bf.
2020-11-03 Andrea Corallo <andrea.corallo@arm.com>
* config/arm/arm-builtins.c (VAR14): Define macro.
* config/arm/arm_neon_builtins.def: Touch for:
__builtin_neon_vld1v4bf, __builtin_neon_vld1v8bf.
* config/arm/arm_neon.h (vld1_bf16, vld1q_bf16): Add intrinsics.
2020-11-03 Andrea Corallo <andrea.corallo@arm.com>
* config/arm/arm_neon.h (vst1_lane_bf16, vst1q_lane_bf16): Add
intrinsics.
* config/arm/arm_neon_builtins.def (STORE1LANE): Add v4bf, v8bf.
2020-11-03 Andrea Corallo <andrea.corallo@arm.com>
* config/arm/arm_neon_builtins.def: Add to LOAD1LANE v4bf, v8bf.
* config/arm/arm_neon.h (vld1_lane_bf16, vld1q_lane_bf16): Add
intrinsics.
2020-11-03 Richard Biener <rguenther@suse.de>
PR bootstrap/97666
* tree-vect-slp.c (vect_build_slp_tree_2): Scale
allocation of skip_args by sizeof (bool).
2020-11-03 Richard Biener <rguenther@suse.de>
PR tree-optimization/80928
* tree-vect-loop.c (vectorizable_induction): SLP vectorize
nested inductions.
2020-11-03 Jan Hubicka <hubicka@ucw.cz>
PR ipa/97578
* ipa-inline-transform.c (maybe_materialize_called_clones): New
function.
(inline_transform): Use it.
2020-11-03 Richard Biener <rguenther@suse.de>
PR tree-optimization/97678
* tree-vect-slp.c (vect_build_slp_tree_2): Do not track
the initial values of inductions when not nested.
* tree-vect-loop.c (vectorizable_induction): Look at
PHI node initial values again for SLP and not nested
inductions. Handle LOOP_VINFO_MASK_SKIP_NITERS and cost
invariants.
2020-11-03 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/sse.md (aes<aeswideklvariant>u8):
Do not use xmm_regs array. Fix whitespace.
2020-11-03 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-expand.c (ix86_expand_builtin): Fix comment.
2020-11-03 Thomas Schwinge <thomas@codesourcery.com>
* omp-low.c (scan_omp_for) <OpenACC>: Move earlier inconsistent
nested 'reduction' clauses checking.
2020-11-03 Thomas Schwinge <thomas@codesourcery.com>
* omp-low.c (scan_omp_for) <OpenACC>: More precise diagnostics for
'gang', 'worker', 'vector' clauses with arguments only allowed in
'kernels' regions.
2020-11-03 Kewen Lin <linkw@gcc.gnu.org>
PR tree-optimization/96789
* function.h (struct function): New member unsigned pending_TODOs.
* passes.c (class pass_pre_slp_scalar_cleanup): New class.
(make_pass_pre_slp_scalar_cleanup): New function.
(pass_data_pre_slp_scalar_cleanup): New pass data.
* passes.def: (pass_pre_slp_scalar_cleanup): New pass, add
pass_fre and pass_dse as its children.
* timevar.def (TV_SCALAR_CLEANUP): New timevar.
* tree-pass.h (PENDING_TODO_force_next_scalar_cleanup): New
pending TODO flag.
(make_pass_pre_slp_scalar_cleanup): New declare.
* tree-ssa-loop-ivcanon.c (tree_unroll_loops_completely_1):
Once any outermost loop gets unrolled, flag cfun pending_TODOs
PENDING_TODO_force_next_scalar_cleanup on.
2020-11-02 Alan Modra <amodra@gmail.com>
PR middle-end/97267
* calls.h (maybe_complain_about_tail_call): Declare.
* calls.c (maybe_complain_about_tail_call): Make global.
(can_implement_as_sibling_call_p): Delete reg_parm_stack_space
param. Adjust caller. Move REG_PARM_STACK_SPACE check to..
* config/i386/i386.c (ix86_function_ok_for_sibcall): ..here.
2020-11-02 Vladimir N. Makarov <vmakarov@redhat.com>
* ira.c (ira_remove_scratches): Rename to remove_scratches. Make
it static and returning flag of any change.
(ira.c): Call ira_expand_reg_equiv in case of removing scratches.
2020-11-02 H.J. Lu <hjl.tools@gmail.com>
PR target/97140
* config/i386/i386-expand.c (ix86_expand_builtin): Require MMX
for __builtin_ia32_maskmovq.
2020-11-02 Martin Sebor <msebor@redhat.com>
* doc/invoke.texi (-Wstringop-overflow): Correct default setting.
(-Wstringop-overread): Move past -Wstringop-overflow.
2020-11-02 François-Xavier Coudert <fxcoudert@gcc.gnu.org>
PR bootstrap/57076
* Makefile.in (gcc-vers.texi): Quote @, { and }.
2020-11-02 Carl Love <cel@us.ibm.com>
PR target/93449
* config/rs6000/altivec.h (__builtin_bcdadd, __builtin_bcdadd_lt,
__builtin_bcdadd_eq, __builtin_bcdadd_gt, __builtin_bcdadd_ofl,
__builtin_bcdadd_ov, __builtin_bcdsub, __builtin_bcdsub_lt,
__builtin_bcdsub_eq, __builtin_bcdsub_gt, __builtin_bcdsub_ofl,
__builtin_bcdsub_ov, __builtin_bcdinvalid, __builtin_bcdmul10,
__builtin_bcddiv10, __builtin_bcd2dfp, __builtin_bcdcmpeq,
__builtin_bcdcmpgt, __builtin_bcdcmplt, __builtin_bcdcmpge,
__builtin_bcdcmple): Add defines.
* config/rs6000/altivec.md: Add UNSPEC_BCDSHIFT.
(BCD_TEST): Add le, ge to code iterator.
Add VBCD mode iterator.
(bcd<bcd_add_sub>_test, *bcd<bcd_add_sub>_test2,
bcd<bcd_add_sub>_<code>, bcd<bcd_add_sub>_<code>): Add mode to name.
Change iterator from V1TI to VBCD.
(*bcdinvalid_<mode>, bcdshift_v16qi): New define_insn.
(bcdinvalid_<mode>, bcdmul10_v16qi, bcddiv10_v16qi): New define.
* config/rs6000/dfp.md (dfp_denbcd_v16qi_inst): New define_insn.
(dfp_denbcd_v16qi): New define_expand.
* config/rs6000/rs6000-builtin.def (BU_P8V_MISC_1): New define.
(BCDADD): Replaced with BCDADD_V1TI and BCDADD_V16QI.
(BCDADD_LT): Replaced with BCDADD_LT_V1TI and BCDADD_LT_V16QI.
(BCDADD_EQ): Replaced with BCDADD_EQ_V1TI and BCDADD_EQ_V16QI.
(BCDADD_GT): Replaced with BCDADD_GT_V1TI and BCDADD_GT_V16QI.
(BCDADD_OV): Replaced with BCDADD_OV_V1TI and BCDADD_OV_V16QI.
(BCDSUB_V1TI, BCDSUB_V16QI, BCDSUB_LT_V1TI, BCDSUB_LT_V16QI,
BCDSUB_LE_V1TI, BCDSUB_LE_V16QI, BCDSUB_EQ_V1TI, BCDSUB_EQ_V16QI,
BCDSUB_GT_V1TI, BCDSUB_GT_V16QI, BCDSUB_GE_V1TI, BCDSUB_GE_V16QI,
BCDSUB_OV_V1TI, BCDSUB_OV_V16QI, BCDINVALID_V1TI, BCDINVALID_V16QI,
BCDMUL10_V16QI, BCDDIV10_V16QI, DENBCD_V16QI): New builtin definitions.
(BCDADD, BCDADD_LT, BCDADD_EQ, BCDADD_GT, BCDADD_OV, BCDSUB, BCDSUB_LT,
BCDSUB_LE, BCDSUB_EQ, BCDSUB_GT, BCDSUB_GE, BCDSUB_OV, BCDINVALID,
BCDMUL10, BCDDIV10, DENBCD): New overload definitions.
* config/rs6000/rs6000-call.c (P8V_BUILTIN_VEC_BCDADD, P8V_BUILTIN_VEC_BCDADD_LT,
P8V_BUILTIN_VEC_BCDADD_EQ, P8V_BUILTIN_VEC_BCDADD_GT, P8V_BUILTIN_VEC_BCDADD_OV,
P8V_BUILTIN_VEC_BCDINVALID, P9V_BUILTIN_VEC_BCDMUL10, P8V_BUILTIN_VEC_DENBCD.
P8V_BUILTIN_VEC_BCDSUB, P8V_BUILTIN_VEC_BCDSUB_LT, P8V_BUILTIN_VEC_BCDSUB_LE,
P8V_BUILTIN_VEC_BCDSUB_EQ, P8V_BUILTIN_VEC_BCDSUB_GT, P8V_BUILTIN_VEC_BCDSUB_GE,
P8V_BUILTIN_VEC_BCDSUB_OV): New overloaded specifications.
(CODE_FOR_bcdadd): Replaced with CODE_FOR_bcdadd_v16qi and CODE_FOR_bcdadd_v1ti.
(CODE_FOR_bcdadd_lt): Replaced with CODE_FOR_bcdadd_lt_v16qi and CODE_FOR_bcdadd_lt_v1ti.
(CODE_FOR_bcdadd_eq): Replaced with CODE_FOR_bcdadd_eq_v16qi and CODE_FOR_bcdadd_eq_v1ti.
(CODE_FOR_bcdadd_gt): Replaced with CODE_FOR_bcdadd_gt_v16qi and CODE_FOR_bcdadd_gt_v1ti.
(CODE_FOR_bcdsub): Replaced with CODE_FOR_bcdsub_v16qi and CODE_FOR_bcdsub_v1ti.
(CODE_FOR_bcdsub_lt): Replaced with CODE_FOR_bcdsub_lt_v16qi and CODE_FOR_bcdsub_lt_v1ti.
(CODE_FOR_bcdsub_eq): Replaced with CODE_FOR_bcdsub_eq_v16qi and CODE_FOR_bcdsub_eq_v1ti.
(CODE_FOR_bcdsub_gt): Replaced with CODE_FOR_bcdsub_gt_v16qi and CODE_FOR_bcdsub_gt_v1ti.
(rs6000_expand_ternop_builtin): Add CODE_FOR_dfp_denbcd_v16qi to else if.
* doc/extend.texi: Add documentation for new builtins.
2020-11-02 Nathan Sidwell <nathan@acm.org>
* tree.c (cache_integer_cst): Fixup pointer caching to match
wide_int_to_type_1's expectations. Add comment.
2020-11-02 Nathan Sidwell <nathan@acm.org>
* tree.h (id_equal): Call the symetric predicate with swapped
arguments.
2020-11-02 Nathan Sidwell <nathan@acm.org>
* print-tree.c (print_node): Display all the operands of a call
expr.
2020-11-02 Vladimir N. Makarov <vmakarov@redhat.com>
* config/rs6000/vsx.md (*vsx_extract_<mode>_store_p9): Add hint *
to 2nd alternative of the 1st scratch.
2020-11-02 Sudakshina Das <sudi.das@arm.com>
PR target/97638
* config/aarch64/aarch64-bti-insert.c (aarch64_pac_insn_p): Update
return value on INSN_P check.
2020-11-02 Richard Biener <rguenther@suse.de>
* tree.h (build_real_from_wide): Declare.
* tree.c (build_real_from_wide): New function.
* tree-vect-slp.c (vect_build_slp_tree_2): Remove
restriction on induction vectorization, represent
the initial value.
* tree-vect-loop.c (vect_model_induction_cost): Inline ...
(vectorizable_induction): ... here. Rewrite SLP
code generation.
2020-11-02 Martin Jambor <mjambor@suse.cz>
* dbgcnt.def (ipa_cp_values): New counter.
(ipa_cp_vr): Likewise.
* ipa-cp.c (decide_about_value): Check and bump ipa_cp_values debug
counter.
(decide_whether_version_node): Likewise.
(ipcp_store_vr_results):Check and bump ipa_cp_vr debug counter.
2020-11-02 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/arm.c (arm_thumb1_mi_thunk): Build mi_delta in r3 and
do not emit function address and delta when -mpure-code is used.
2020-11-02 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/thumb1.md (thumb1_movsi_insn): Call
thumb1_gen_const_int_print.
* config/arm/arm-protos.h (thumb1_gen_const_int_print): Add
prototype.
* config/arm/arm.c (thumb1_gen_const_int_print): New.
2020-11-02 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/arm.c (thumb1_const_rtl, thumb1_const_print): New
classes.
(thumb1_gen_const_int): Rename to ...
(thumb1_gen_const_int_1): ... New helper function. Add capability
to emit either RTL or asm, improve generated code.
(thumb1_gen_const_int_rtl): New function.
* config/arm/arm-protos.h (thumb1_gen_const_int): Rename to
thumb1_gen_const_int_rtl.
* config/arm/thumb1.md: Call thumb1_gen_const_int_rtl instead
of thumb1_gen_const_int.
2020-11-02 Richard Biener <rguenther@suse.de>
PR tree-optimization/97558
* tree-vect-loop.c (vectorizable_reduction): For nested SLP
cycles compute invariant operands vector type.
2020-11-02 Richard Biener <rguenther@suse.de>
PR tree-optimization/97558
* tree-vect-loop.c (vect_fixup_scalar_cycles_with_patterns):
Check for any mismatch in pattern vs. non-pattern and dissolve
the group if there is one.
* tree-vect-slp.c (vect_analyze_slp_instance): Avoid
analyzing not relevant reductions.
(vect_analyze_slp): Avoid analyzing not relevant reduction
groups.
2020-11-02 Richard Biener <rguenther@suse.de>
PR tree-optimization/97650
* tree-vect-slp.c (vect_get_and_check_slp_defs): Check
for SSA_NAME before checking SSA_NAME_IS_DEFAULT_DEF.
2020-11-02 Kito Cheng <kito.cheng@sifive.com>
* common/config/riscv/riscv-common.c
(riscv_subset_list::parse_multiletter_ext): Checking multiletter
extension has more than 1 letter.
2020-11-02 Kito Cheng <kito.cheng@sifive.com>
* config.gcc (riscv*-*-*): Handle --with-multilib-generator.
* configure: Regen.
* configure.ac: Add --with-multilib-generator.
* config/riscv/multilib-generator: Exit when parsing arch string error.
* config/riscv/t-withmultilib-generator: New.
* doc/install.texi: Document --with-multilib-generator.
2020-11-02 Christophe Lyon <christophe.lyon@linaro.org>
PR target/96770
* config/arm/arm.c (thumb_legitimate_constant_p): Accept
(symbol_ref + addend) when literal pool is disabled.
(arm_valid_symbolic_address_p): Add support for thumb-1 without
MOVT/MOVW.
* config/arm/thumb1.md (*thumb1_movsi_insn): Accept (symbol_ref +
addend) in the pure-code alternative.
2020-11-02 Christophe Lyon <christophe.lyon@linaro.org>
PR target/96967
* config/arm/arm.c (thumb_legitimate_constant_p): Add support for
disabled literal pool in thumb-1.
* config/arm/thumb1.md (thumb1_movsi_symbol_ref): Remove.
(*thumb1_movsi_insn): Add support for SYMBOL_REF with -mpure-code.
2020-11-01 Iain Sandoe <iain@sandoe.co.uk>
* config/host-darwin.c: Align pch_address_space to 16384.
2020-11-01 Pat Bernardi <bernardi@adacore.com>
* config/i386/i386.c (ix86_expand_prologue): Set the stack usage to 0
for naked functions.
2020-11-01 Iain Buclaw <ibuclaw@gdcproject.org>
PR ipa/97660
* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Don't call
clone_info::get when cgraph_node::get returns NULL.
2020-10-31 Jan Hubicka <jh@suse.cz>
* Makefile.in: (OBJS): Add symtab-clones.o
(GTFILES): Add symtab-clones.h
* cgraph.c: Include symtab-clones.h.
(cgraph_edge::resolve_speculation): Fix formating
(cgraph_edge::redirect_call_stmt_to_callee): Update.
(cgraph_update_edges_for_call_stmt): Update
(release_function_body): Fix formating.
(cgraph_node::remove): Fix formating.
(cgraph_node::dump): Fix formating.
(cgraph_node::get_availability): Fix formating.
(cgraph_node::call_for_symbol_thunks_and_aliases): Fix formating.
(set_const_flag_1): Fix formating.
(set_pure_flag_1): Fix formating.
(cgraph_node::can_remove_if_no_direct_calls_p): Fix formating.
(collect_callers_of_node_1): Fix formating.
(clone_of_p): Update.
(cgraph_node::verify_node): Update.
(cgraph_c_finalize): Call clone_info::release ().
* cgraph.h (struct cgraph_clone_info): Move to symtab-clones.h.
(cgraph_node): Remove clone_info.
(symbol_table): Add m_clones.
* cgraphclones.c: Include symtab-clone.h.
(duplicate_thunk_for_node): Update.
(cgraph_node::create_clone): Update.
(cgraph_node::create_virtual_clone): Update.
(cgraph_node::find_replacement): Update.
(cgraph_node::materialize_clone): Update.
* gengtype.c (open_base_files): Include symtab-clones.h.
* ipa-cp.c: Include symtab-clones.h.
(initialize_node_lattices): Update.
(want_remove_some_param_p): Update.
(create_specialized_node): Update.
* ipa-fnsummary.c: Include symtab-clones.h.
(ipa_fn_summary_t::duplicate): Update.
* ipa-modref.c: Include symtab-clones.h.
(update_signature): Update.
* ipa-param-manipulation.c: Include symtab-clones.h.
(ipa_param_body_adjustments::common_initialization): Update.
* ipa-prop.c: Include symtab-clones.h.
(adjust_agg_replacement_values): Update.
(ipcp_get_parm_bits): Update.
(ipcp_update_bits): Update.
(ipcp_update_vr): Update.
* ipa-sra.c: Include symtab-clones.h.
(process_isra_node_results): Update.
(disable_unavailable_parameters): Update.
* lto-cgraph.c: Include symtab-clone.h.
(output_cgraph_opt_summary_p): Update.
(output_node_opt_summary): Update.
(input_node_opt_summary): Update.
* symtab-clones.cc: New file.
* symtab-clones.h: New file.
* tree-inline.c (expand_call_inline): Update.
(update_clone_info): Update.
(tree_function_versioning): Update.
2020-10-31 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_summary::dump): Dump writes_errno.
(parm_map_for_arg): Break out from ...
(merge_call_side_effects): ... here.
(get_access_for_fnspec): New function.
(process_fnspec): New function.
(analyze_call): Use it.
(analyze_stmt): Update.
(analyze_function): Initialize writes_errno.
(modref_summaries::duplicate): Duplicate writes_errno.
* ipa-modref.h (struct modref_summary): Add writes_errno.
* tree-ssa-alias.c (call_may_clobber_ref_p_1): Check errno.
2020-10-30 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000.c (glibc_supports_ieee_128bit): New helper
function.
(rs6000_option_override_internal): Call it.
2020-10-30 Qing Zhao <qing.zhao@oracle.com>
H.J.Lu <hjl.tools@gmail.com>
* common.opt: Add new option -fzero-call-used-regs
* config/i386/i386.c (zero_call_used_regno_p): New function.
(zero_call_used_regno_mode): Likewise.
(zero_all_vector_registers): Likewise.
(zero_all_st_registers): Likewise.
(zero_all_mm_registers): Likewise.
(ix86_zero_call_used_regs): Likewise.
(TARGET_ZERO_CALL_USED_REGS): Define.
* df-scan.c (df_epilogue_uses_p): New function.
(df_get_exit_block_use_set): Replace EPILOGUE_USES with
df_epilogue_uses_p.
* df.h (df_epilogue_uses_p): Declare.
* doc/extend.texi: Document the new zero_call_used_regs attribute.
* doc/invoke.texi: Document the new -fzero-call-used-regs option.
* doc/tm.texi: Regenerate.
* doc/tm.texi.in (TARGET_ZERO_CALL_USED_REGS): New hook.
* emit-rtl.h (struct rtl_data): New field must_be_zero_on_return.
* flag-types.h (namespace zero_regs_flags): New namespace.
* function.c (gen_call_used_regs_seq): New function.
(class pass_zero_call_used_regs): New class.
(pass_zero_call_used_regs::execute): New function.
(make_pass_zero_call_used_regs): New function.
* optabs.c (expand_asm_reg_clobber_mem_blockage): New function.
* optabs.h (expand_asm_reg_clobber_mem_blockage): Declare.
* opts.c (zero_call_used_regs_opts): New structure array
initialization.
(parse_zero_call_used_regs_options): New function.
(common_handle_option): Handle -fzero-call-used-regs.
* opts.h (zero_call_used_regs_opts): New structure array.
* passes.def: Add new pass pass_zero_call_used_regs.
* recog.c (valid_insn_p): New function.
* recog.h (valid_insn_p): Declare.
* resource.c (init_resource_info): Replace EPILOGUE_USES with
df_epilogue_uses_p.
* target.def (zero_call_used_regs): New hook.
* targhooks.c (default_zero_call_used_regs): New function.
* targhooks.h (default_zero_call_used_regs): Declare.
* tree-pass.h (make_pass_zero_call_used_regs): Declare.
2020-10-30 Vladimir N. Makarov <vmakarov@redhat.com>
* lra.c (get_scratch_reg): New function.
(remove_scratches_1): Rename remove_insn_scratches. Use
ira_remove_insn_scratches and get_scratch_reg.
(remove_scratches): Do not
initialize scratches, scratch_bitmap, and scratch_operand_bitmap.
(lra): Call ira_restore_scratches instead of restore_scratches.
(struct sloc, sloc_t, scratches, scratch_bitmap)
(scratch_operand_bitmap, lra_former_scratch_p)
(lra_former_scratch_operand_p, lra_register_new_scratch_op)
(restore_scratches): Move them to ...
* ira.c: ... here.
(former_scratch_p, former_scratch_operand_p): Rename to
ira_former_scratch_p and ira_former_scratch_operand_p.
(contains_X_constraint_p): New function.
(register_new_scratch_op): Rename to ira_register_new_scratch_op.
Change it to work for IRA and LRA.
(restore_scratches): Rename to ira_restore_scratches.
(get_scratch_reg, ira_remove_insn_scratches): New functions.
(ira): Call ira_remove_scratches if we use LRA.
* ira.h (ira_former_scratch_p, ira_former_scratch_operand_p): New
prototypes.
(ira_register_new_scratch_op, ira_restore_scratches): New prototypes.
(ira_remove_insn_scratches): New prototype.
* lra-int.h (lra_former_scratch_p, lra_former_scratch_operand_p):
Remove prototypes.
(lra_register_new_scratch_op): Ditto.
* lra-constraints.c: Rename lra_former_scratch_p and
lra_former_scratch_p to ira_former_scratch_p and to
ira_former_scratch_p.
* lra-remat.c: Ditto.
* lra-spills.c: Rename lra_former_scratch_p to ira_former_scratch_p.
2020-10-30 Martin Sebor <msebor@redhat.com>
PR middle-end/97556
* builtins.c (access_ref::add_offset): Cap offset lower bound
to at most the the upper bound.
2020-10-30 Jan Hubicka <jh@suse.cz>
PR pch/97593
* cgraph.c (cgraph_node::create_thunk): Register thunk as early during
parsing.
* cgraphunit.c (analyze_functions): Call
thunk_info::process_early_thunks.
* symtab-thunks.cc (struct unprocessed_thunk): New struct.
(thunks): New static variable.
(thunk_info::register_early): New member function.
(thunk_info::process_early_thunks): New member function.
* symtab-thunks.h (thunk_info::register_early): Declare.
(thunk_info::process_early_thunks): Declare.
2020-10-30 Richard Biener <rguenther@suse.de>
PR tree-optimization/97623
* tree-ssa-pre.c (insert): First do hoist insertion in
a backward walk.
2020-10-30 Richard Biener <rguenther@suse.de>
PR tree-optimization/97626
* tree-vect-slp.c (vect_slp_analyze_node_operations):
Exchange the lvisited hash-set for a vector, roll back
recursive adds to visited when analysis failed.
(vect_slp_analyze_operations): Likewise.
2020-10-30 Zhiheng Xie <xiezhiheng@huawei.com>
Nannan Zheng <zhengnannan@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for conversion intrinsics.
2020-10-30 Richard Biener <rguenther@suse.de>
PR tree-optimization/97633
* tree-vect-slp.c (): Update backedges in single-node cycles.
Optimize processing of externals.
2020-10-30 Alex Coplan <alex.coplan@arm.com>
PR target/96998
* combine.c (make_extraction): Also handle shifts written as
(mult x 2^n), avoid creating an extract rtx for these.
* config/aarch64/aarch64.c (aarch64_is_extend_from_extract): Delete.
(aarch64_classify_index): Remove extract-based address handling.
(aarch64_strip_extend): Likewise.
(aarch64_rtx_arith_op_extract_p): Likewise, remove now-unused parameter.
Update callers...
(aarch64_rtx_costs): ... here.
2020-10-30 Olivier Hainque <hainque@adacore.com>
* config/rs6000/vxworks.h (TARGET_OS_CPP_BUILTINS): Also
builtin_define __ppc and __ppc__ for VxWorks 7.
2020-10-30 Olivier Hainque <hainque@adacore.com>
Douglas Rupp <rupp@adacore.com>
Pat Bernardi <bernardi@adacore.com>
* config.gcc: Adjust the ix86/x86_64-wrs-vxworks filters
to apply to VxWorks 7 as well.
* config/i386/t-vxworks (MULTILIB_OPTIONS, MULTILIB_DIRNAMES):
Remove the fPIC multilib and add one for the large code model
on x86_64.
* config/i386/vxworks.h: Separate sections for TARGET_VXWORKS7,
other variants and common bits.
(TARGET_OS_CPP_BUILTINS): Augment to support a range of CPU
families. Leverage VX_CPU_PREFIX.
(CC1_SPEC): Add definition.
(STACK_CHECK_PROTECT): Use conditional expression instead of
heavier to read conditioned macro definitions.
2020-10-30 Jakub Jelinek <jakub@redhat.com>
* gimplify.c (gimplify_scan_omp_clauses): Force
OMP_CLAUSE_ALLOCATE_ALLOCATOR into a temporary if it is non-NULL and
non-constant.
(gimplify_omp_for): Only put allocate on inner taskloop if lastprivate
for the same variable is going to be put there, and in that case
if the OMP_CLAUSE_ALLOCATE_ALLOCATOR is non-NULL non-constant, make
the allocator firstprivate on task.
2020-10-30 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal): Allow
long double type to be changed for C/C++ if glibc 2.32 or newer.
(rs6000_invalid_binary_op): Update error messages about mixing IBM
long double and IEEE 128-bit.
2020-10-29 Richard Biener <rguenther@suse.de>
* tree-ssa-pre.c (compute_avail): Free operands consistently.
* tree-vect-loop.c (vectorizable_phi): Make sure all operand
defs vectors are released.
2020-10-29 Jan Hubicka <jh@suse.cz>
* vec.h (vec<T, va_heap, vl_ptr>::copy): Pass mem stat info.
2020-10-29 Jan Hubicka <jh@suse.cz>
* wide-int.h (trailing_wide_ints <N>): Turn len to array of structures
so it does not imply typeless storage.
(trailing_wide_ints <N>::operator): update
(trailing_wide_ints <N>::operator []): Update.
2020-10-29 Joseph Myers <joseph@codesourcery.com>
* ginclude/stdbool.h [__STDC_VERSION__ > 201710L] (true, false):
Define with type _Bool.
2020-10-29 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97505
* vr-values.c (vr_values::extract_range_basic): Enable
trap again for everything except UBSAN builtins.
2020-10-29 Richard Sandiford <richard.sandiford@arm.com>
* tree-vectorizer.h (vect_transform_slp_perm_load): Take an
optional extra parameter.
* tree-vect-slp.c (vect_transform_slp_perm_load): Calculate
the number of loads as well as the number of permutes, taking
the counting loop from...
* tree-vect-stmts.c (vect_model_load_cost): ...here. Use the
value computed by vect_transform_slp_perm_load for ncopies.
2020-10-29 Martin Liska <mliska@suse.cz>
PR lto/97508
* langhooks.c (lhd_begin_section): Call get_section with
not_existing = true.
* output.h (get_section): Add new argument.
* varasm.c (get_section): Fail when NOT_EXISTING is true
and a section already exists.
* ipa-cp.c (ipcp_write_summary): Remove.
(ipcp_read_summary): Likewise.
* ipa-fnsummary.c (ipa_fn_summary_read): Always read jump
functions summary.
(ipa_fn_summary_write): Always stream it.
2020-10-29 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_bb_slp_scalar_cost): Pass
SLP_TREE_VECTYPE to record_stmt_cost.
2020-10-29 Martin Liska <mliska@suse.cz>
* optc-gen.awk: Check that params start with -param=.
* params.opt: Fix ipa-jump-function-lookups.
2020-10-29 Alexandre Oliva <oliva@adacore.com>
* tree-ssa-math-opts.c (sincos_stats): Add conv_removed.
(execute_cse_conv_1): New.
(execute_cse_sincos_1): Call it. Fix return within
FOR_EACH_IMM_USE_STMT.
(pass_cse_sincos::execute): Report conv_inserted.
2020-10-29 Xuepeng Guo <xuepeng.guo@intel.com>
Hongyu Wang <hongyu.wang@intel.com>
Hongtao Liu <hongtao.liu@intel.com>
* common/config/i386/cpuinfo.h (get_available_features):
Detect KL, AESKLE and WIDEKL features.
* common/config/i386/i386-common.c
(OPTION_MASK_ISA_KL_SET): New.
(OPTION_MASK_ISA_WIDEKL_SET): Likewise.
(OPTION_MASK_ISA_KL_UNSET): Likewise.
(OPTION_MASK_ISA_WIDEKL_UNSET): Likewise.
(OPTION_MASK_ISA2_AVX2_UNSET): Likewise.
(OPTION_MASK_ISA2_AVX_UNSET): Likewise.
(OPTION_MASK_ISA2_SSE4_2_UNSET): Likewise.
(OPTION_MASK_ISA2_SSE4_1_UNSET): Likewise.
(OPTION_MASK_ISA2_SSE4_UNSET): Likewise.
(OPTION_MASK_ISA2_SSSE3_UNSET): Likewise.
(OPTION_MASK_ISA2_SSE3_UNSET): Likewise.
(OPTION_MASK_ISA2_SSE2_UNSET): Likewise.
(OPTION_MASK_ISA2_SSE_UNSET): Likewise.
(ix86_handle_option): Handle kl and widekl, add dependency chain
for KL and SSE2.
* common/config/i386/i386-cpuinfo.h (enum processor_features):
(FEATURE_KL, FEATURE_AESKLE, FEATURE_WIDEKL): New.
* common/config/i386/i386-isas.h: Add ISA_NAMES_TABLE_ENTRY
for KL, AESKLE and WIDEKL.
* config.gcc: Add keylockerintrin.h.
* doc/invoke.texi: Document new option -mkl and -mwidekl.
* doc/extend.texi: Document kl and widekl.
* config/i386/cpuid.h (bit_KL, bit_AESKLE, bit_WIDEKL): New.
* config/i386/i386-builtin-types.def ((UINT, UINT, V2DI, V2DI, PVOID),
(UINT, UINT, V2DI, PVOID), (VOID, V2DI, V2DI, V2DI, UINT),
(UINT8, PV2DI, V2DI, PCVOID), (UINT8, PV2DI, PCV2DI, PCVOID)): New
function types.
* config/i386/i386-builtin.def: Add
__builtin_ia32_loadiwkey,
__builtin_ia32_aesdec128kl_u8,
__builtin_ia32_aesdec256kl_u8,
__builtin_ia32_aesenc128kl_u8,
__builtin_ia32_aesenc256kl_u8,
__builtin_ia32_aesdecwide128kl_u8,
__builtin_ia32_aesdecwide256kl_u8,
__builtin_ia32_aesencwide128kl_u8,
__builtin_ia32_aesencwide256kl_u8,
__builtin_ia32_encodekey128_u32,
__builtin_ia32_encodekey256_u32.
* config/i386/i386-c.c (ix86_target_macros_internal): Handle
kl and widekl.
* config/i386/i386-options.c (isa2_opts): Add -mkl and -mwidekl.
(ix86_option_override_internal): Handle KL and WIDEKL.
(ix86_valid_target_attribute_inner_p): Add attribute for kl and widekl.
* config/i386/i386-expand.c
(ix86_expand_builtin): Expand Keylocker Builtins.
* config/i386/i386.h (TARGET_KL): New.
(TARGET_KL_P): Likewise.
(TARGET_WIDEKL): Likewise.
(TARGET_WIDEKL_P): Likewise.
(PTA_KL): Likewise.
(PTA_WIDEKL): Likewise.
(PTA_TIGERLAKE): Add PTA_KL, PTA_WIDEKL.
(PTA_ALDERLAKE): Likewise.
* config/i386/i386.opt: Add new option mkl and mwidekl.
* config/i386/keylockerintrin.h: New header file for Keylocker.
* config/i386/immintrin.h: Include keylockerintrin.h.
* config/i386/predicates.md (encodekey128_operation): New
predicate.
(encodekey256_operation): Likewise.
(aeswidekl_operation): Likewise.
* config/i386/sse.md (UNSPECV_LOADIWKEY): New.
(UNSPECV_AESDEC128KLU8): Likewise.
(UNSPECV_AESENC128KLU8): Likewise.
(UNSPECV_AESDEC256KLU8): Likewise.
(UNSPECV_AESENC256KLU8): Likewise.
(UNSPECV_AESDECWIDE128KLU8): Likewise.
(UNSPECV_AESENCWIDE128KLU8): Likewise.
(UNSPECV_AESDECWIDE256KLU8): Likewise.
(UNSPECV_AESENCWIDE256KLU8): Likewise.
(UNSPECV_ENCODEKEY128U32): Likewise.
(UNSPECV_ENCODEKEY256U32): Likewise.
(encodekey128u32): New expander.
(encodekey256u32): Likewise.
(aes<aeswideklvariant>u8): Likewise.
(loadiwkey): New insn pattern.
(*encodekey128u32): Likewise.
(*encodekey256u32): Likewise.
(aes<aesklvariant>u8): Likewise.
(*aes<aeswideklvariant>u8): Likewise.
2020-10-29 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_build_slp_tree_2): Allow splatting
not vectorizable loads.
(vect_build_slp_instance): Amend dumping with address.
(vect_slp_convert_to_external): Likewise.
2020-10-29 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97609
* gimple-range-cache.cc (non_null_ref::process_name): Call
infer_nonnull_range directly instead of infer_value_range.
2020-10-29 David Malcolm <dmalcolm@redhat.com>
* Makefile.in (ANALYZER_OBJS): Add analyzer/complexity.o.
2020-10-28 Marek Polacek <polacek@redhat.com>
PR c++/97573
* doc/invoke.texi: Document -Wdeprecated-enum-enum-conversion
and -Wdeprecated-enum-float-conversion. -Wenum-conversion is
no longer C/ObjC only.
2020-10-28 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/97457
* value-range.cc (irange::set): Don't decay POLY_INT_CST ranges
to integer ranges.
2020-10-28 Carl Love <cel@us.ibm.com>
* config/rs6000/vsx.md(xxgenpcvm_<mode>_internal): Remove TARGET_64BIT.
2020-10-28 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_slp_analyze_node_operations_1): Dump
when shared vectype update fails.
2020-10-28 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): For skipped
args just push NULLs and vect_uninitialized_def.
(vect_build_slp_tree_2): Allocate skip_args for all ops
and pass it down to vect_get_and_check_slp_defs.
2020-10-28 Richard Biener <rguenther@suse.de>
PR tree-optimization/97615
* tree-vect-slp.c (vect_build_slp_tree_2): Do not build
an external from pattern defs.
2020-10-28 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_optimize_slp): Fix iteration over
all loads.
2020-10-28 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_build_slp_instance): Split the store
group at the failure boundary and also re-analyze a large enough
matching rest.
2020-10-28 Richard Biener <rguenther@suse.de>
* tree-vect-data-refs.c (vect_slp_analyze_node_alignment):
Dump when vect_update_shared_vectype fails.
2020-10-28 Andrea Corallo <andrea.corallo@arm.com>
* config/aarch64/arm_neon.h (__ST2_LANE_FUNC, __ST3_LANE_FUNC)
(__ST4_LANE_FUNC): Rename the macro generating the 'q' variants
into __ST2Q_LANE_FUNC, __ST2Q_LANE_FUNC, __ST2Q_LANE_FUNC so they
all can be undefed at the and of the file.
(vst2_lane_bf16, vst2q_lane_bf16, vst3_lane_bf16, vst3q_lane_bf16)
(vst4_lane_bf16, vst4q_lane_bf16): Add new intrinsics.
2020-10-28 Andrea Corallo <andrea.corallo@arm.com>
* config/aarch64/arm_neon.h (__LD2_LANE_FUNC, __LD3_LANE_FUNC)
(__LD4_LANE_FUNC): Rename the macro generating the 'q' variants
into __LD2Q_LANE_FUNC, __LD2Q_LANE_FUNC, __LD2Q_LANE_FUNC so they
all can be undefed at the and of the file.
(vld2_lane_bf16, vld2q_lane_bf16, vld3_lane_bf16, vld3q_lane_bf16)
(vld4_lane_bf16, vld4q_lane_bf16): Add new intrinsics.
2020-10-28 Jakub Jelinek <jakub@redhat.com>
* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_ALLOCATE.
* tree.h (OMP_CLAUSE_ALLOCATE_ALLOCATOR,
OMP_CLAUSE_ALLOCATE_COMBINED): Define.
* tree.c (omp_clause_num_ops, omp_clause_code_name): Add allocate
clause.
(walk_tree_1): Handle OMP_CLAUSE_ALLOCATE.
* tree-pretty-print.c (dump_omp_clause): Likewise.
* gimplify.c (gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses,
gimplify_omp_for): Likewise.
* tree-nested.c (convert_nonlocal_omp_clauses,
convert_local_omp_clauses): Likewise.
* omp-low.c (scan_sharing_clauses): Likewise.
2020-10-28 Jakub Jelinek <jakub@redhat.com>
* omp-offload.c (omp_declare_target_tgt_fn_r): Handle direct calls to
declare variant base functions.
2020-10-28 Jakub Jelinek <jakub@redhat.com>
PR lto/96680
* lto-streamer.h (omp_lto_output_declare_variant_alt,
omp_lto_input_declare_variant_alt): Declare variant.
* symtab.c (symtab_node::get_partitioning_class): Return
SYMBOL_DUPLICATE for declare_variant_alt nodes.
* passes.c (ipa_write_summaries): Add declare_variant_alt to
partition.
* lto-cgraph.c (output_refs): Call omp_lto_output_declare_variant_alt
on declare_variant_alt nodes.
(input_refs): Call omp_lto_input_declare_variant_alt on
declare_variant_alt nodes.
* lto-streamer-out.c (output_function): Don't call
collect_block_tree_leafs if DECL_INITIAL is error_mark_node.
(lto_output): Call output_function even for declare_variant_alt
nodes.
* omp-general.c (omp_lto_output_declare_variant_alt,
omp_lto_input_declare_variant_alt): New functions.
2020-10-28 Jakub Jelinek <jakub@redhat.com>
* wide-int.cc (wi::set_bit_large): Call canonize unless setting
msb bit and clearing bits above it.
2020-10-28 Andrew MacLeod <amacleod@redhat.com>
* gimple-range-gori.cc (gori_compute_cache::cache_stmt): Accumulate
return values and only set cache when everything returned true.
* gimple-range.cc (get_tree_range): Set the return range to UNDEFINED
when the range isn't supported.
(gimple_ranger::calc_stmt): Return varying if the type is supported,
even if the stmt processing failed. False otherwise.
(range_of_builtin_ubsan_call): Don't use gcc_assert.
(range_of_builtin_call): Ditto.
(gimple_ranger::range_of_cond_expr): Ditto.
(gimple_ranger::range_of_expr): Ditto
(gimple_ranger::range_on_entry): Ditto.
(gimple_ranger::range_on_exit): Ditto.
(gimple_ranger::range_on_edge): DItto.
(gimple_ranger::range_of_stmt): Don't use gcc_assert, and initialize
return value to UNDEFINED.
2020-10-27 Andreas Krebbel <krebbel@linux.ibm.com>
PR rtl-optimization/97497
* config/s390/s390.c (s390_hard_regno_call_part_clobbered): Do not
return true for r12 when -fpic is used.
2020-10-27 Tamar Christina <tamar.christina@arm.com>
PR target/97535
* config/aarch64/aarch64.c (aarch64_expand_cpymem): Use unsigned
arithmetic in check.
2020-10-27 Andrea Corallo <andrea.corallo@arm.com>
* config/aarch64/arm_neon.h (vcopy_lane_bf16, vcopyq_lane_bf16)
(vcopyq_laneq_bf16, vcopy_laneq_bf16): New intrinsics.
2020-10-27 Olivier Hainque <hainque@adacore.com>
* config/vxworks.h (VX_CPU_PREFIX): #define here.
* config/rs6000/vxworks.h: Remove #definition.
2020-10-27 Olivier Hainque <hainque@adacore.com>
* config/rs6000/vxworks.h (CPP_SPEC): Fix macro definition
for -mcpu=e6500.
2020-10-27 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_build_slp_instance): Use ceil_log2
to compute maximum group-size.
2020-10-27 Jan Hubicka <jh@suse.cz>
PR ipa/97586
* ipa-modref-tree.h (modref_tree::remap_params): New member function.
* ipa-modref.c (modref_summaries_lto::duplicate): Check that
optimization summaries are not duplicated.
(remap_arguments): Remove.
(modref_transform): Rename to ...
(update_signature): ... this one; handle also lto summary.
(pass_ipa_modref::execute): Update signatures here rather
than in transform hook.
2020-10-27 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_slp_bbs): Remove no-op
slp-max-insns-in-bb check.
(vect_slp_function): Dump when splitting the function.
Adjust the split condition for control altering stmts.
* params.opt (-param=slp-max-insns-in-bb): Remove.
* doc/invoke.texi (-param=slp-max-insns-in-bb): Likewise.
2020-10-27 Richard Biener <rguenther@suse.de>
* gimple.h (gimple_expr_type): For PHIs return the type
of the result.
* tree-vect-loop-manip.c (slpeel_tree_duplicate_loop_to_edge_cfg):
Make sure edge order into copied loop headers line up with the
originals.
* tree-vect-loop.c (vect_transform_cycle_phi): Handle nested
loops with SLP.
(vectorizable_phi): New function.
(vectorizable_live_operation): For BB vectorization compute insert
location here.
* tree-vect-slp.c (vect_free_slp_tree): Deal with NULL
SLP_TREE_CHILDREN entries.
(vect_create_new_slp_node): Add overloads with pre-existing node
argument.
(vect_print_slp_graph): Likewise.
(vect_mark_slp_stmts): Likewise.
(vect_mark_slp_stmts_relevant): Likewise.
(vect_gather_slp_loads): Likewise.
(vect_optimize_slp): Likewise.
(vect_slp_analyze_node_operations): Likewise.
(vect_bb_slp_scalar_cost): Likewise.
(vect_remove_slp_scalar_calls): Likewise.
(vect_get_and_check_slp_defs): Handle PHIs.
(vect_build_slp_tree_1): Handle PHIs.
(vect_build_slp_tree_2): Continue SLP build, following PHI
arguments. Fix memory leak.
(vect_build_slp_tree): Put stub node into the hash-map so
we can discover cycles directly.
(vect_build_slp_instance): Set the backedge SLP def for
reduction chains.
(vect_analyze_slp_backedges): Remove.
(vect_analyze_slp): Do not call it.
(vect_slp_convert_to_external): Release SLP_TREE_LOAD_PERMUTATION.
(vect_slp_analyze_node_operations): Handle stray failed
backedge defs by failing.
(vect_slp_build_vertices): Adjust leaf condition.
(vect_bb_slp_mark_live_stmts): Handle PHIs, use visited
hash-set to handle cycles.
(vect_slp_analyze_operations): Adjust.
(vect_bb_partition_graph_r): Likewise.
(vect_slp_function): Adjust split condition to allow CFG
merges.
(vect_schedule_slp_instance): Rename to ...
(vect_schedule_slp_node): ... this. Move DFS walk to ...
(vect_schedule_scc): ... this new function.
(vect_schedule_slp): Call it. Remove ad-hoc vectorized
backedge fill code.
* tree-vect-stmts.c (vect_analyze_stmt): Call
vectorizable_phi.
(vect_transform_stmt): Likewise.
(vect_is_simple_use): Handle vect_backedge_def.
* tree-vectorizer.c (vec_info::new_stmt_vec_info): Only
set loop header PHIs to vect_unknown_def_type for loop
vectorization.
* tree-vectorizer.h (enum vect_def_type): Add vect_backedge_def.
(enum stmt_vec_info_type): Add phi_info_type.
(vectorizable_phi): Declare.
2020-10-27 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_build_slp_tree_2): When vectorizing
BBs splat uniform operands and stop SLP discovery.
2020-10-27 Iain Buclaw <ibuclaw@gdcproject.org>
* config/aarch64/aarch64-linux.h (GNU_USER_TARGET_D_CRITSEC_SIZE):
Remove.
* config/glibc-d.c (glibc_d_critsec_size): Likewise.
(TARGET_D_CRITSEC_SIZE): Likewise.
* config/i386/linux-common.h (GNU_USER_TARGET_D_CRITSEC_SIZE):
Likewise.
* config/sol2-d.c (solaris_d_critsec_size): Likewise.
(TARGET_D_CRITSEC_SIZE): Likewise.
* doc/tm.texi.in (TARGET_D_CRITSEC_SIZE): Likewise.
* doc/tm.texi: Regenerate.
2020-10-27 Martin Liska <mliska@suse.cz>
PR gcov-profile/97461
* gcov-io.h (GCOV_PREALLOCATED_KVP): Pre-allocate 64
static counters.
2020-10-27 Jan Hubicka <jh@suse.cz>
* tree-ssa-alias.c (attr_fnspec::verify): Re-enabl checking.
2020-10-27 Jan Hubicka <jh@suse.cz>
* builtin-attrs.def (STRERRNOC): New macro.
(STRERRNOP): New macro.
(ATTR_ERRNOCONST_NOTHROW_LEAF_LIST): New attr list.
(ATTR_ERRNOPURE_NOTHROW_LEAF_LIST): New attr list.
* builtins.def (ATTR_MATHFN_ERRNO): Use
ATTR_ERRNOCONST_NOTHROW_LEAF_LIST.
(ATTR_MATHFN_FPROUNDING_ERRNO): Use ATTR_ERRNOCONST_NOTHROW_LEAF_LIST
or ATTR_ERRNOPURE_NOTHROW_LEAF_LIST.
2020-10-27 Kito Cheng <kito.cheng@sifive.com>
* common/config/riscv/riscv-common.c (opt_var_ref_t): New.
(riscv_ext_flag_table_t): New.
(riscv_ext_flag_table): New.
(riscv_parse_arch_string): Pass gcc_options* instead of
&opts->x_target_flags only, and using riscv_arch_option_table to
setup flags.
(riscv_handle_option): Update argument for riscv_parse_arch_string.
(riscv_expand_arch): Ditto.
(riscv_expand_arch_from_cpu): Ditto.
2020-10-27 Jan Hubicka <jh@suse.cz>
* tree-ssa-ccp.c (evaluate_stmt): Use EAF_RETURN_ARG; do not handle
string buitings specially.
2020-10-27 Jan Hubicka <jh@suse.cz>
* tree.c (set_call_expr_flags): Fix string for ECF_RET1.
(build_common_builtin_nodes): Do not set ECF_RET1 for memcpy, memmove,
and memset. They are handled by builtin_fnspec.
2020-10-27 Jan Hubicka <jh@suse.cz>
* builtins.c (builtin_fnspec): Add bzero, memcmp, memcmp_eq, bcmp,
strncmp, strncmp_eq, strncasecmp, rindex, strlen, strlnen, strcasecmp,
strcspn, strspn, strcmp, strcmp_eq.
2020-10-27 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (slp_tree_pool): Declare.
(_slp_tree::operator new): Likewise.
(_slp_tree::operator delete): Likewise.
* tree-vectorizer.c (vectorize_loops): Allocate and free the
slp_tree_pool.
(pass_slp_vectorize::execute): Likewise.
* tree-vect-slp.c (slp_tree_pool): Define.
(_slp_tree::operator new): Likewise.
(_slp_tree::operator delete): Likewise.
2020-10-27 Martin Liska <mliska@suse.cz>
* lto-wrapper.c (run_gcc): Do not use sub-make when jobserver is
not detected properly.
2020-10-27 Martin Liska <mliska@suse.cz>
* symbol-summary.h (call_summary_base): Pass symtab hooks to
base and register (or unregister) hooks directly.
2020-10-27 Martin Liska <mliska@suse.cz>
* symbol-summary.h (function_summary_base::unregister_hooks):
Call disable_insertion_hook and disable_duplication_hook.
(function_summary_base::symtab_insertion): New field.
(function_summary_base::symtab_removal): Likewise.
(function_summary_base::symtab_duplication): Likewise.
Register hooks in function_summary_base and directly register
(or unregister) hooks.
2020-10-26 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97567
* gimple-range-gori.cc (gori_compute::logical_combine): Union the
ranges of operand1 and operand2, not intersect.
2020-10-26 Jan Hubicka <jh@suse.cz>
* attr-fnspec.h: Update toplevel comment.
(attr_fnspec::attr_fnspec): New constructor.
(attr_fnspec::arg_read_p,
attr_fnspec::arg_written_p,
attr_fnspec::arg_access_size_given_by_arg_p,
attr_fnspec::arg_single_access_p
attr_fnspec::loads_known_p
attr_fnspec::stores_known_p,
attr_fnspec::clobbers_errno_p): New member functions.
(gimple_call_fnspec): Declare.
(builtin_fnspec): Declare.
* builtins.c: Include attr-fnspec.h
(builtin_fnspec): New function.
* builtins.def (BUILT_IN_MEMCPY): Do not specify RET1 fnspec.
(BUILT_IN_MEMMOVE): Do not specify RET1 fnspec.
(BUILT_IN_MEMSET): Do not specify RET1 fnspec.
(BUILT_IN_STRCAT): Do not specify RET1 fnspec.
(BUILT_IN_STRCPY): Do not specify RET1 fnspec.
(BUILT_IN_STRNCAT): Do not specify RET1 fnspec.
(BUILT_IN_STRNCPY): Do not specify RET1 fnspec.
(BUILT_IN_MEMCPY_CHK): Do not specify RET1 fnspec.
(BUILT_IN_MEMMOVE_CHK): Do not specify RET1 fnspec.
(BUILT_IN_MEMSET_CHK): Do not specify RET1 fnspec.
(BUILT_IN_STRCAT_CHK): Do not specify RET1 fnspec.
(BUILT_IN_STRCPY_CHK): Do not specify RET1 fnspec.
(BUILT_IN_STRNCAT_CHK): Do not specify RET1 fnspec.
(BUILT_IN_STRNCPY_CHK): Do not specify RET1 fnspec.
* gimple.c (gimple_call_fnspec): Return attr_fnspec.
(gimple_call_arg_flags): Update.
(gimple_call_return_flags): Update.
* tree-ssa-alias.c (check_fnspec): New function.
(ref_maybe_used_by_call_p_1): Use fnspec for builtin handling.
(call_may_clobber_ref_p_1): Likewise.
(attr_fnspec::verify): Update verifier.
* calls.c (decl_fnspec): New function.
(decl_return_flags): Use it.
2020-10-26 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97555
* range-op.cc (range_tests): Test 1-bit signed invert.
* value-range.cc (subtract_one): Adjust comment.
(add_one): New.
(irange::invert): Call add_one.
2020-10-26 Jan Hubicka <jh@suse.cz>
* cgraph.h (cgraph_node::optimize_for_size_p): Return
optimize_size_level.
(cgraph_node::optimize_for_size_p): Update.
* coretypes.h (enum optimize_size_level): New enum.
* predict.c (unlikely_executed_edge_p): Microoptimize.
(optimize_function_for_size_p): Return optimize_size_level.
(optimize_bb_for_size_p): Likewise.
(optimize_edge_for_size_p): Likewise.
(optimize_insn_for_size_p): Likewise.
(optimize_loop_nest_for_size_p): Likewise.
* predict.h (optimize_function_for_size_p): Update declaration.
(optimize_bb_for_size_p): Update declaration.
(optimize_edge_for_size_p): Update declaration.
(optimize_insn_for_size_p): Update declaration.
(optimize_loop_for_size_p): Update declaration.
(optimize_loop_nest_for_size_p): Update declaration.
2020-10-26 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (enum slp_instance_kind): New.
(vect_build_slp_instance): Split out from...
(vect_analyze_slp_instance): ... this.
2020-10-26 Andrew MacLeod <amacleod@redhat.com>
* gimple-range.cc (range_of_builtin_call): Initialize zerov to 0.
2020-10-26 Jan Hubicka <jh@suse.cz>
PR ipa/97576
* cgraphclones.c (cgraph_node::materialize_clone): Clear stmt
references.
* cgraphunit.c (mark_functions_to_output): Do not clear them here.
* ipa-inline-transform.c (inline_transform): Clear stmt references.
* symtab.c (symtab_node::clear_stmts_in_references): Make recursive
for clones.
* tree-ssa-structalias.c (ipa_pta_execute): Do not clear references.
2020-10-26 Zhiheng Xie <xiezhiheng@huawei.com>
Nannan Zheng <zhengnannan@huawei.com>
* config/aarch64/aarch64-builtins.c: Add FLAG STORE.
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for store intrinsics.
2020-10-26 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR tree-optimization/97546
* gimple-ssa-store-merging.c (find_bswap_or_nop): Return NULL if
type is not INTEGER_CST.
2020-10-26 Richard Biener <rguenther@suse.de>
PR middle-end/97521
* expr.c (const_scalar_mask_from_tree): Remove.
(expand_expr_real_1): Always VIEW_CONVERT integer mode
vector constants to an integer type.
* tree.c (build_truth_vector_type_for_mode): Use a single-bit
boolean component type for non-vector-mode mask_mode.
2020-10-26 H.J. Lu <hjl.tools@gmail.com>
PR target/95458
* config/i386/i386-expand.c (ix86_expand_cmpstrn_or_cmpmem):
Return false for -mno-inline-all-stringops.
2020-10-26 H.J. Lu <hjl.tools@gmail.com>
PR target/95151
* config/i386/i386-expand.c (ix86_expand_cmpstrn_or_cmpmem): New
function.
* config/i386/i386-protos.h (ix86_expand_cmpstrn_or_cmpmem): New
prototype.
* config/i386/i386.md (cmpmemsi): New pattern.
2020-10-26 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/vector.md ("vcond_mask_<mode><mode>"): New expander.
2020-10-26 Richard Biener <rguenther@suse.de>
* sbitmap.c (sbitmap_vector_alloc): Use size_t for byte
quantities to avoid overflow.
2020-10-26 Richard Biener <rguenther@suse.de>
PR tree-optimization/97539
* tree-vect-loop-manip.c (vect_do_peeling): Reset out-of-loop
debug uses before peeling.
2020-10-26 Jan Hubicka <hubicka@ucw.cz>
* cgraph.h (struct cgraph_node): Make ipa_transforms_to_apply vl_ptr.
* ipa-inline-analysis.c (initialize_growth_caches): Disable insertion
and duplication hooks.
* ipa-inline-transform.c (clone_inlined_nodes): Clear
ipa_transforms_to_apply.
(save_inline_function_body): Disable insertion hoook for
ipa_saved_clone_sources.
* ipa-prop.c (ipcp_transformation_initialize): Disable insertion hook.
* ipa-prop.h (ipa_node_params_t): Disable insertion hook.
* ipa-reference.c (propagate): Disable insertion hoook.
* ipa-sra.c (ipa_sra_summarize_function): Move out of anonymous
namespace.
(ipa_sra_function_summaries::insert): New virtual function.
* passes.c (execute_one_pass): Do not add transforms to inline clones.
* symbol-summary.h (function_summary_base): Make insert and duplicate
hooks fail instead of silently producing empty summaries; add way to
disable duplication hooks
(call_summary_base): Likewise.
* tree-nested.c (nested_function_info::get_create): Disable insertion
hooks
(maybe_record_nested_function): Likewise.
2020-10-26 Xionghu Luo <luoxhu@linux.ibm.com>
* cfg.c (debug_bb): New overloaded function.
(debug_bb_n): New overloaded function.
* cfg.h (debug_bb): New declaration.
(debug_bb_n): New declaration.
* print-rtl.c (debug_bb_slim): Call debug_bb with flags.
2020-10-24 H.J. Lu <hjl.tools@gmail.com>
PR bootstrap/97451
* configure.ac (HAVE_AS_WORKING_DWARF_4_FLAG): Renamed to ...
(HAVE_AS_WORKING_DWARF_N_FLAG): This. Don't define if there is
an extra assembly input file in debug info. Replace success
with dwarf4_success in the 32-bit --gdwarf-4 check.
* dwarf2out.c (asm_outputs_debug_line_str): Check
HAVE_AS_WORKING_DWARF_N_FLAG instead of
HAVE_AS_WORKING_DWARF_4_FLAG.
* gcc.c (ASM_DEBUG_SPEC): Likewise.
(ASM_DEBUG_OPTION_SPEC): Likewise.
* config.in: Regenerated.
* configure: Likewise.
2020-10-24 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97538
* calls.c (get_size_range): Handle undefined ranges.
2020-10-24 Martin Liska <mliska@suse.cz>
* cgraph.c (cgraph_node::former_thunk_p): Move out of CHECKING_P
macro.
2020-10-24 Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.c (rs6000_legitimate_address_p): Limit
AND addressing to just lvx/stvx style addresses.
2020-10-24 Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.md (cstore<mode>4): Don't call
rs6000_emit_int_cmove for power10 when -mno-isel.
2020-10-23 Jan Hubicka <hubicka@ucw.cz>
* Makefile.in: Add symtab-thunks.o
(GTFILES): Add symtab-thunks.h and symtab-thunks.cc; remove cgraphunit.c
* cgraph.c: Include symtab-thunks.h.
(cgraph_node::create_thunk): Update
(symbol_table::create_edge): Update
(cgraph_node::dump): Update
(cgraph_node::call_for_symbol_thunks_and_aliases): Update
(set_nothrow_flag_1): Update
(set_malloc_flag_1): Update
(set_const_flag_1): Update
(collect_callers_of_node_1): Update
(clone_of_p): Update
(cgraph_node::verify_node): Update
(cgraph_node::function_symbol): Update
(cgraph_c_finalize): Call thunk_info::release.
(cgraph_node::has_thunk_p): Update
(cgraph_node::former_thunk_p): Move here from cgraph.h; reimplement.
* cgraph.h (struct cgraph_thunk_info): Rename to symtab-thunks.h.
(cgraph_node): Remove thunk field; add thunk bitfield.
(cgraph_node::expand_thunk): Move to symtab-thunks.h
(symtab_thunks_cc_finalize): Declare.
(cgraph_node::has_gimple_body_p): Update.
(cgraph_node::former_thunk_p): Update.
* cgraphclones.c: Include symtab-thunks.h.
(duplicate_thunk_for_node): Update.
(cgraph_edge::redirect_callee_duplicating_thunks): Update.
(cgraph_node::expand_all_artificial_thunks): Update.
(cgraph_node::create_edge_including_clones): Update.
* cgraphunit.c: Include symtab-thunks.h.
(vtable_entry_type): Move to symtab-thunks.c.
(cgraph_node::analyze): Update.
(analyze_functions): Update.
(mark_functions_to_output): Update.
(thunk_adjust): Move to symtab-thunks.c
(cgraph_node::expand_thunk): Move to symtab-thunks.c
(cgraph_node::assemble_thunks_and_aliases): Update.
(output_in_order): Update.
(cgraphunit_c_finalize): Do not clear vtable_entry_type.
(cgraph_node::create_wrapper): Update.
* gengtype.c (open_base_files): Add symtab-thunks.h
* ipa-comdats.c (propagate_comdat_group): UPdate.
(ipa_comdats): Update.
* ipa-cp.c (determine_versionability): UPdate.
(gather_caller_stats): Update.
(count_callers): Update
(set_single_call_flag): Update
(initialize_node_lattices): Update
(call_passes_through_thunk_p): Update
(call_passes_through_thunk): Update
(propagate_constants_across_call): Update
(find_more_scalar_values_for_callers_subset): Update
(has_undead_caller_from_outside_scc_p): Update
* ipa-fnsummary.c (evaluate_properties_for_edge): Update.
(compute_fn_summary): Update.
(inline_analyze_function): Update.
* ipa-icf.c: Include symtab-thunks.h.
(sem_function::equals_wpa): Update.
(redirect_all_callers): Update.
(sem_function::init): Update.
(sem_function::parse): Update.
* ipa-inline-transform.c: Include symtab-thunks.h.
(inline_call): Update.
(save_inline_function_body): Update.
(preserve_function_body_p): Update.
* ipa-inline.c (inline_small_functions): Update.
* ipa-polymorphic-call.c: Include alloc-pool.h, symbol-summary.h,
symtab-thunks.h
(ipa_polymorphic_call_context::ipa_polymorphic_call_context): Update.
* ipa-pure-const.c: Include symtab-thunks.h.
(analyze_function): Update.
* ipa-sra.c (check_for_caller_issues): Update.
* ipa-utils.c (ipa_reverse_postorder): Update.
(ipa_merge_profiles): Update.
* ipa-visibility.c (non_local_p): Update.
(cgraph_node::local_p): Update.
(function_and_variable_visibility): Update.
* ipa.c (symbol_table::remove_unreachable_nodes): Update.
* lto-cgraph.c: Include alloc-pool.h, symbol-summary.h and
symtab-thunks.h
(lto_output_edge): Update.
(lto_output_node): Update.
(compute_ltrans_boundary): Update.
(output_symtab): Update.
(verify_node_partition): Update.
(input_overwrite_node): Update.
(input_node): Update.
* lto-streamer-in.c (fixup_call_stmt_edges): Update.
* symtab-thunks.cc: New file.
* symtab-thunks.h: New file.
* toplev.c (toplev::finalize): Call symtab_thunks_cc_finalize.
* trans-mem.c (ipa_tm_mayenterirr_function): Update.
(ipa_tm_execute): Update.
* tree-inline.c (expand_call_inline): Update.
* tree-nested.c (create_nesting_tree): Update.
(convert_all_function_calls): Update.
(gimplify_all_functions): Update.
* tree-profile.c (tree_profiling): Update.
* tree-ssa-structalias.c (associate_varinfo_to_alias): Update.
* tree.c (free_lang_data_in_decl): Update.
* value-prof.c (init_node_map): Update.
2020-10-23 Marek Polacek <polacek@redhat.com>
PR c++/91741
* doc/invoke.texi: Document -Wsizeof-array-div.
2020-10-23 Martin Sebor <msebor@redhat.com>
PR middle-end/97552
* attribs.c (init_attr_rdwr_indices): Handle static VLA parameters.
2020-10-23 Douglas Rupp <rupp@adacore.com>
* config/vxworks.h (VXWORKS_NET_LIBS_RTP): Use -lrtnet if
rtnetStackLib.h is available,fallback to -lnet otherwise.
2020-10-23 Douglas Rupp <rupp@adacore.com>
* gcc.c (if-exists-then-else): New built-in spec function.
* doc/invoke.texi: Document it.
2020-10-23 Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* doc/extend.texi (PowerPC Built-in Functions): Replace
extraneous characters with whitespace.
2020-10-23 Martin Liska <mliska@suse.cz>
* gcov.c (read_count_file): Never call gcov_sync with a negative
value.
2020-10-23 Jakub Jelinek <jakub@redhat.com>
* Makefile.in (PLUGIN_HEADERS): Add gomp-constants.h and $(EXPR_H).
(s-header-vars): Accept not just spaces but also tabs between *_H name
and =. Handle common/config/ headers similarly to config. Don't
throw away everything from first ... to last / on the remaining
string, instead skip just ... to corresponding last / without
intervening spaces and tabs.
(install-plugin): Treat common/config headers like config headers.
* config/i386/t-i386 (TM_H): Add
$(srcdir)/common/config/i386/i386-cpuinfo.h.
2020-10-23 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97164
* stor-layout.c (layout_type): Also reject arrays where element size
is constant, but not a multiple of element alignment.
2020-10-23 Eric Botcazou <ebotcazou@adacore.com>
* tree-ssa-loop-ivopts.c (analyze_and_mark_doloop_use): Bail out if
the loop is subject to a pragma Unroll with no specific count.
2020-10-23 Dennis Zhang <dennis.zhang@arm.com>
* config/arm/mve.md (mve_vsubq<mode>): New entry for vsub instruction
using expression 'minus'.
(mve_vsubq_f<mode>): Use minus instead of VSUBQ_F unspec.
* config/arm/neon.md (sub<mode>3, sub<mode>3_fp16): Removed.
(neon_vsub<mode>): Use gen_sub<mode>3 instead of gen_sub<mode>3_fp16.
* config/arm/vec-common.md (sub<mode>3): Use the new mode macros
ARM_HAVE_<MODE>_ARITH. Use iterator VDQ instead of VALL.
2020-10-23 Martin Liska <mliska@suse.cz>
PR lto/97524
* lto-wrapper.c (make_exists): New function.
(run_gcc): Use it to check that make is present and working
for parallel execution.
2020-10-23 Richard Biener <rguenther@suse.de>
Revert:
2020-10-22 Richard Biener <rguenther@suse.de>
PR middle-end/97521
* expr.c (expand_expr_real_1): Be more careful when
expanding a VECTOR_BOOLEAN_TYPE_P VECTOR_CSTs.
2020-10-23 Kewen Lin <linkw@linux.ibm.com>
* tree-vect-loop.c (vect_transform_loop): Remove the redundant
LOOP_VINFO_FULLY_MASKED_P check.
2020-10-23 Dennis Zhang <dennis.zhang@arm.com>
* config/arm/mve.md (mve_vsubq<mode>): New entry for vsub instruction
using expression 'minus'.
(mve_vsubq_f<mode>): Use minus instead of VSUBQ_F unspec.
* config/arm/neon.md (sub<mode>3, sub<mode>3_fp16): Removed.
(neon_vsub<mode>): Use gen_sub<mode>3 instead of gen_sub<mode>3_fp16.
* config/arm/vec-common.md (sub<mode>3): Use the new mode macros
ARM_HAVE_<MODE>_ARITH. Use iterator VDQ instead of VALL.
2020-10-22 Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.c (rs6000_emit_xxspltidp_v2df): Delete
debug printf. Remove trailing ".\n" from inform message.
Break long line.
2020-10-22 Andrew MacLeod <amacleod@redhat.com>
* gimple-range-gori.cc (is_gimple_logical_p): Use types_compatible_p
for logical compatibility.
(logical_stmt_cache::cacheable_p): Ditto.
2020-10-22 Jan Hubicka <hubicka@ucw.cz>
* cgraph.c (cgraph_node::get_untransformed_body): Perform lazy
clone materialization.
* cgraph.h (cgraph_node::materialize_clone): Declare.
(symbol_table::materialize_all_clones): Remove.
* cgraphclones.c (cgraph_materialize_clone): Turn to ...
(cgraph_node::materialize_clone): .. this one; move here
dumping from symbol_table::materialize_all_clones.
(symbol_table::materialize_all_clones): Remove.
* cgraphunit.c (mark_functions_to_output): Clear stmt references.
(cgraph_node::expand): Initialize bitmaps early;
do not call execute_all_ipa_transforms if there are no transforms.
* ipa-inline-transform.c (save_inline_function_body): Fix formating.
(inline_transform): Materialize all clones before function is modified.
* ipa-param-manipulation.c (ipa_param_adjustments::modify_call):
Materialize clone if needed.
* ipa.c (class pass_materialize_all_clones): Remove.
(make_pass_materialize_all_clones): Remove.
* passes.c (execute_all_ipa_transforms): Materialize all clones.
* passes.def: Remove pass_materialize_all_clones.
* tree-pass.h (make_pass_materialize_all_clones): Remove.
* tree-ssa-structalias.c (ipa_pta_execute): Clear refs.
2020-10-22 Will Schmidt <will_schmidt@vnet.ibm.com>
* config/rs6000/altivec.h (vec_xl_zext, vec_xl_sext, vec_xst_trunc):
New defines.
* config/rs6000/rs6000-builtin.def (BU_P10V_OVERLOAD_X): New builtin
macro.
(BU_P10V_AV_X): New builtin macro.
(se_lxvrhbx, se_lxrbhx, se_lxvrwx, se_lxvrdx): Define internal names
for load and sign extend vector element.
(ze_lxvrbx, ze_lxvrhx, ze_lxvrwx, ze_lxvrdx): Define internal names
for load and zero extend vector element.
(tr_stxvrbx, tr_stxvrhx, tr_stxvrwx, tr_stxvrdx): Define internal names
for truncate and store vector element.
(se_lxvrx, ze_lxvrx, tr_stxvrx): Define internal names for overloaded
load/store rightmost element.
* config/rs6000/rs6000-call.c (altivec_builtin_types): Define the
internal monomorphs P10_BUILTIN_SE_LXVRBX, P10_BUILTIN_SE_LXVRHX,
P10_BUILTIN_SE_LXVRWX, P10_BUILTIN_SE_LXVRDX,
P10_BUILTIN_ZE_LXVRBX, P10_BUILTIN_ZE_LXVRHX, P10_BUILTIN_ZE_LXVRWX,
P10_BUILTIN_ZE_LXVRDX,
P10_BUILTIN_TR_STXVRBX, P10_BUILTIN_TR_STXVRHX, P10_BUILTIN_TR_STXVRWX,
P10_BUILTIN_TR_STXVRDX,
(altivec_expand_lxvr_builtin): New expansion for load element builtins.
(altivec_expand_stv_builtin): Update to for truncate and store builtins.
(altivec_expand_builtin): Add clases for load/store rightmost builtins.
(altivec_init_builtins): Add def_builtin entries for
__builtin_altivec_se_lxvrbx, __builtin_altivec_se_lxvrhx,
__builtin_altivec_se_lxvrwx, __builtin_altivec_se_lxvrdx,
__builtin_altivec_ze_lxvrbx, __builtin_altivec_ze_lxvrhx,
__builtin_altivec_ze_lxvrwx, __builtin_altivec_ze_lxvrdx,
__builtin_altivec_tr_stxvrbx, __builtin_altivec_tr_stxvrhx,
__builtin_altivec_tr_stxvrwx, __builtin_altivec_tr_stxvrdx,
__builtin_vec_se_lxvrx, __builtin_vec_ze_lxvrx, __builtin_vec_tr_stxvrx.
* config/rs6000/vsx.md (vsx_lxvr<wd>x, vsx_stxvr<wd>x, vsx_stxvr<wd>x):
New define_insn entries.
* doc/extend.texi: Add documentation for vsx_xl_sext, vsx_xl_zext,
and vec_xst_trunc.
2020-10-22 Will Schmidt <will_schmidt@vnet.ibm.com>
* config/rs6000/vsx.md (enum unspec): Add
UNSPEC_EXTENDDITI2 and UNSPEC_MTVSRD_DITI_W1 entries.
(mtvsrdd_diti_w1, extendditi2_vector): New define_insns.
(extendditi2): New define_expand.
2020-10-22 Alexandre Oliva <oliva@adacore.com>
* config/i386/mingw-w64.h (TARGET_LIBC_HAS_FUNCTION): Enable
sincos optimization.
2020-10-22 Alan Modra <amodra@gmail.com>
* config/rs6000/vsx.md (vec_cntmb_<mode>, vec_extract_<mode>),
(vec_expand_<mode>): Replace <VSX_MM_SUFFIX> with <wd>.
2020-10-22 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_analyze_slp_instance): Refactor so
computing a vector type early is not needed, for store group
splitting compute a new vector type based on the desired
group size.
2020-10-22 Richard Biener <rguenther@suse.de>
PR middle-end/97521
* expr.c (expand_expr_real_1): Be more careful when
expanding a VECTOR_BOOLEAN_TYPE_P VECTOR_CSTs.
2020-10-22 David Malcolm <dmalcolm@redhat.com>
* ipa-modref-tree.c (selftest::test_insert_search_collapse): Fix
leak.
(selftest::test_merge): Fix leaks.
2020-10-22 Andreas Krebbel <krebbel@linux.ibm.com>
PR target/97502
* config/s390/vector.md ("vec_cmp<VI_HW:mode><VI_HW:mode>")
("vec_cmpu<VI_HW:mode><VI_HW:mode>"): New expanders.
2020-10-22 Andreas Krebbel <krebbel@linux.ibm.com>
PR rtl-optimization/97439
* dfp.c (decimal_real_maxval): Set the sign flag in the
generated number.
2020-10-22 Martin Liska <mliska@suse.cz>
PR c/94722
* cfgexpand.c (stack_protect_decl_phase):
Guard with lookup_attribute("no_stack_protector") at
various places.
(expand_used_vars): Likewise here.
* doc/extend.texi: Document no_stack_protector attribute.
2020-10-22 Martin Liska <mliska@suse.cz>
* cfgexpand.c: Move the enum to ...
* coretypes.h (enum stack_protector): ... here.
* function.c (assign_parm_adjust_stack_rtl): Use the stack_protector
enum.
2020-10-22 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/multilib-generator: Add TODO, import itertools
and functools.reduce.
Handle expantion operator.
(LONG_EXT_PREFIXES): New.
(arch_canonicalize): Update comment and improve python3
debuggability/compatibility.
(add_underline_prefix): New.
(_expand_combination): Ditto.
(unique): Ditto.
(expand_combination): Ditto.
2020-10-22 Jakub Jelinek <jakub@redhat.com>
* tree-ssa-phiopt.c (cond_removal_in_popcount_clz_ctz_pattern):
For CLZ and CTZ tests, use type temporary instead of mode.
2020-10-22 Jakub Jelinek <jakub@redhat.com>
* config.gcc (x86_archs): Add samuel-2, nehemiah, c7 and esther.
(x86_64_archs): Add eden-x2, nano, nano-1000, nano-2000, nano-3000,
nano-x2, eden-x4, nano-x4, x86-64-v2, x86-64-v3 and x86-64-v4.
(i[34567]86-*-* | x86_64-*-*): Only allow x86-64-v* as argument
to --with-arch_64=.
2020-10-22 Jan Hubicka <jh@suse.cz>
* ipa-pure-const.c (funct_state_summary_t::insert): Free stale
summaries.
2020-10-22 Jan Hubicka <hubicka@ucw.cz>
* cgraph.c: Include tree-nested.h
(cgraph_node::create): Call maybe_record_nested_function.
(cgraph_node::remove): Do not remove function from nested function
infos.
(cgraph_node::dump): Update.
(cgraph_node::unnest): Move to tree-nested.c
(cgraph_node::verify_node): Update.
(cgraph_c_finalize): Call nested_function_info::release.
* cgraph.h (struct symtab_node): Remove nested function info.
* cgraphclones.c (cgraph_node::create_clone): Do not clone nested
function info.
* cgraphunit.c (cgraph_node::analyze): Update.
(cgraph_node::expand): Do not worry about nested functions; they are
lowered.
(symbol_table::finalize_compilation_unit): Call
nested_function_info::release.
* gimplify.c: Include tree-nested.h
(unshare_body): Update.
(unvisit_body): Update.
* omp-offload.c (omp_discover_implicit_declare_target): Update.
* tree-nested.c: Include alloc-pool.h, tree-nested.h, symbol-summary.h
(nested_function_sum): New static variable.
(nested_function_info::get): New member function.
(nested_function_info::get_create): New member function.
(unnest_function): New function.
(nested_function_info::~nested_function_info): New member function.
(nested_function_info::release): New function.
(maybe_record_nested_function): New function.
(lookup_element_for_decl): Update.
(check_for_nested_with_variably_modified): Update.
(create_nesting_tree): Update.
(unnest_nesting_tree_1): Update.
(gimplify_all_functions): Update.
(lower_nested_functions): Update.
* tree-nested.h (class nested_function_info): New class.
(maybe_record_nested_function): Declare.
(unnest_function): Declare.
(first_nested_function): New inline function.
(next_nested_function): New inline function.
(nested_function_origin): New inline function.
2020-10-22 liuhongt <hongtao.liu@intel.com>
PR rtl-optimization/97249
* simplify-rtx.c (simplify_binary_operation_1): Simplify
vec_select of a subreg of X to a vec_select of X.
2020-10-22 liuhongt <hongtao.liu@intel.com>
PR target/87767
* config/i386/constraints.md ("Br"): New special memory
constraint.
* config/i386/i386-expand.c (ix86_binary_operator_ok): Both
source operand cannot be in memory or bcst_memory_operand.
* config/i386/i386.c (ix86_print_operand): Print bcst_mem_operand.
* config/i386/i386.h (VALID_BCST_MODE_P): New.
* config/i386/predicates.md (bcst_mem_operand): New predicate
for AVX512 embedding broadcast memory operand.
(bcst_vector_operand): New predicate, vector_operand or
bcst_mem_operand.
* config/i386/sse.md
(*<plusminus_insn><mode>3<mask_name><round_name>): Extend
predicate and constraints to handle bcst_mem_operand.
(*mul<mode>3<mask_name><round_name>): Ditto.
(<sse>_div<mode>3<mask_name><round_name>): Ditto.
(<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name><round_name>):
Ditto.
(<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name><round_name>):
Ditto.
(<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name><round_name>):
Ditto.
(<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name><round_name>):
Ditto.
(*<plusminus_insn><mode>3): Ditto.
(avx512dq_mul<mode>3<mask_name>): Ditto.
(*<sse4_1_avx2>_mul<mode>3<mask_name>): Ditto.
(*andnot<mode>3): Ditto.
(<mask_codefor><code><mode>3<mask_name>): Ditto.
(*sub<mode>3<mask_name>_bcst): Removed.
(*add<mode>3<mask_name>_bcst): Ditto.
(*mul<mode>3<mask_name>_bcst): Ditto.
(*<avx512>_div<mode>3<mask_name>_bcst): Ditto.
(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_1):
Ditto.
(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_2):
Ditto.
(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_3):
Ditto.
(*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_1):
Ditto.
(*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_2):
Ditto.
(*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_3):
Ditto.
(*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_1):
Ditto.
(*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_2):
Ditto.
(*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_3):
Ditto.
(*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_1):
Ditto.
(*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_2):
Ditto.
(*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_3):
Ditto.
(*sub<mode>3_bcst): Ditto.
(*add<mode>3_bcst): Ditto.
(*avx512dq_mul<mode>3<mask_name>_bcst): Ditto.
(*avx512f_mul<mode>3<mask_name>_bcst): Ditto.
(*andnot<mode>3_bcst): Ditto.
(*<code><mode>3_bcst): Ditto.
* config/i386/subst.md (bcst_round_constraint): New subst
attribute.
(bcst_round_nimm_predicate): Ditto.
(bcst_mask_prefix3): Ditto.
(bcst_mask_prefix4): Ditto.
2020-10-22 liuhongt <hongtao.liu@intel.com>
PR target/87767
* ira-costs.c (record_operand_costs): Extract memory operand
from recog_data.operand[i] for record_address_regs.
(record_reg_classes): Extract memory operand from OP for
conditional judgement MEM_P.
* ira.c (ira_setup_alts): Ditto.
* lra-constraints.c (extract_mem_from_operand): New function.
(satisfies_memory_constraint_p): Extract memory operand from
OP for decompose_mem_address, return false when there's no
memory operand inside OP.
(process_alt_operands): Remove MEM_P (op) since it would be
judged in satisfies_memory_constraint_p.
* recog.c (asm_operand_ok): Extract memory operand from OP for
judgement of memory_operand (OP, VOIDmode).
(constrain_operands): Don't unwrapper unary operator when
there's memory operand inside.
* rtl.h (extract_mem_from_operand): New decl.
2020-10-22 Dennis Zhang <dennis.zhang@arm.com>
* config/arm/mve.md (mve_vmaxq_<supf><mode>): Replace with ...
(mve_vmaxq_s<mode>, mve_vmaxq_u<mode>): ... these new insns to
use smax/umax instead of VMAXQ.
(mve_vminq_<supf><mode>): Replace with ...
(mve_vminq_s<mode>, mve_vminq_u<mode>): ... these new insns to
use smin/umin instead of VMINQ.
(mve_vmaxnmq_f<mode>): Use smax instead of VMAXNMQ_F.
(mve_vminnmq_f<mode>): Use smin instead of VMINNMQ_F.
* config/arm/vec-common.md (smin<mode>3): Use the new mode macros
ARM_HAVE_<MODE>_ARITH.
(umin<mode>3, smax<mode>3, umax<mode>3): Likewise.
2020-10-22 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97520
* gimple-range.cc (range_of_non_trivial_assignment): Handle x = &a
by returning a non-zero range.
2020-10-22 Dennis Zhang <dennis.zhang@arm.com>
* config/arm/mve.md (mve_vmulq<mode>): New entry for vmul instruction
using expression 'mult'.
(mve_vmulq_f<mode>): Use mult instead of VMULQ_F.
* config/arm/neon.md (mul<mode>3): Removed.
* config/arm/vec-common.md (mul<mode>3): Use the new mode macros
ARM_HAVE_<MODE>_ARITH. Use mode iterator VDQWH instead of VALLW.
2020-10-22 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97515
* value-query.cc (range_query::value_of_expr): If the result is
UNDEFINED, check to see if the global value is a constant.
(range_query::value_on_edge): Ditto.
2020-10-21 Jan Hubicka <hubicka@ucw.cz>
PR ipa/97445
* ipa-inline.c (inline_insns_single): Add hint2 parameter.
(inline_insns_auto): Add hint2 parameter.
(can_inline_edge_by_limits_p): Update.
(want_inline_small_function_p): Update.
(wrapper_heuristics_may_apply): Update.
2020-10-21 Richard Biener <rguenther@suse.de>
Andrew MacLeod <amacleod@redhat.com>
Martin Liska <mliska@suse.cz>
PR target/97360
* config/rs6000/rs6000-call.c (rs6000_init_builtins): Remove call to
build_distinct_type_copy().
2020-10-21 Jan Hubicka <jh@suse.cz>
PR ipa/97445
* ipa-fnsummary.c (ipa_dump_hints): Add INLINE_HINT_builtin_constant_p.
(ipa_fn_summary::~ipa_fn_summary): Free builtin_constant_p_parms.
(ipa_fn_summary_t::duplicate): Duplicate builtin_constant_p_parms.
(ipa_dump_fn_summary): Dump builtin_constant_p_parms.
(add_builtin_constant_p_parm): New function
(set_cond_stmt_execution_predicate): Update builtin_constant_p_parms.
(ipa_call_context::estimate_size_and_time): Set
INLINE_HINT_builtin_constant_p..
(ipa_merge_fn_summary_after_inlining): Merge builtin_constant_p_parms.
(inline_read_section): Read builtin_constant_p_parms.
(ipa_fn_summary_write): Write builtin_constant_p_parms.
* ipa-fnsummary.h (enum ipa_hints_vals): Add
INLINE_HINT_builtin_constant_p.
* ipa-inline.c (want_inline_small_function_p): Use
INLINE_HINT_builtin_constant_p.
(edge_badness): Use INLINE_HINT_builtin_constant_p.
2020-10-21 Douglas Rupp <rupp@adacore.com>
* config/vx-common.h (LINK_SPEC, LIB_SPEC): Remove #undef.
2020-10-21 Douglas Rupp <rupp@adacore.com>
Olivier Hainque <hainque@adacore.com>
* config.gcc (powerpc*-wrs-vxworks7r*): New case.
* config/rs6000/vxworks.h: Rework to handle VxWorks7.
Refactor as common bits + vx6 vs vx7 ones. For the
latter, rely essentially on the Linux configuration
and adjust CPU to _VX_CPU in CPP_SPEC. Add a case
for e6500. Use SUB3TARGET_OVERRIDE_OPTIONS for specifics
to preserve the Linux SUBSUBTARGET_OVERRIDE_OPTIONS
for vx7.
2020-10-21 Richard Biener <rguenther@suse.de>
PR tree-optimization/97500
* tree-vect-slp.c (vect_analyze_slp_backedges): Do not
fill backedges for inductions.
2020-10-21 liuhongt <hongtao.liu@intel.com>
PR target/97506
* config/i386/i386-expand.c (ix86_expand_sse_movcc): Move
op_true to dest directly when op_true equals op_false.
2020-10-21 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97503
* tree-ssa-phiopt.c: Include internal-fn.h.
(cond_removal_in_popcount_pattern): Rename to ...
(cond_removal_in_popcount_clz_ctz_pattern): ... this. Handle not just
popcount, but also clz and ctz if it has C?Z_DEFINED_VALUE_AT_ZERO 2.
2020-10-21 Richard Biener <rguenther@suse.de>
* cfg.c (htab_bb_copy_original_entry): Remove.
(bb_copy_hasher): Likewise.
(bb_original, bb_copy, loop_copy): Use
hash_map<int_hash<int, -1, -2>, int>.
(original_copy_bb_pool): Remove.
(initialize_original_copy_tables): Adjust.
(reset_original_copy_tables): Likewise.
(free_original_copy_tables): Likewise.
(original_copy_tables_initialized_p): Likewise.
(copy_original_table_clear): Simplify.
(copy_original_table_set): Likewise.
(get_bb_original): Likewise.
(get_bb_copy): Likewise.
(get_loop_copy): Likewise.
2020-10-21 Richard Biener <rguenther@suse.de>
* cfghooks.c (copy_bbs): Split out loop computing new_edges.
2020-10-21 Aldy Hernandez <aldyh@redhat.com>
* gimple-range.cc (gimple_ranger::range_of_ssa_name_with_loop_info):
Remove TREE_OVERFLOW special case.
* vr-values.c (bounds_of_var_in_loop): Adjust overflow for
invariants.
2020-10-21 Aldy Hernandez <aldyh@redhat.com>
* vr-values.h: Remove simplify_cond_using_ranges_2.
(range_fits_type_p): New.
* vr-values.c (range_fits_type_p): Remove static qualifier.
(vrp_simplify_cond_using_ranges): Move...
* tree-vrp.c (vrp_simplify_cond_using_ranges): ...to here.
2020-10-20 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97505
* vr-values.c (vr_values::extract_range_basic): Trap if
vr_values version disagrees with range_of_builtin_call.
2020-10-20 David Edelsohn <dje.gcc@gmail.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Don't implcitly enable Altivec ABI if set on the command line.
2020-10-20 Aldy Hernandez <aldyh@redhat.com>
* calls.c (get_size_range): Adjust to work with ranger.
* calls.h (get_size_range): Add ranger argument to prototype.
* gimple-ssa-warn-restrict.c (class wrestrict_dom_walker): Remove.
(check_call): Pull out of wrestrict_dom_walker into a
static function.
(wrestrict_dom_walker::before_dom_children): Rename to...
(wrestrict_walk): ...this.
(pass_wrestrict::execute): Instantiate ranger.
(class builtin_memref): Add stmt and query fields.
(builtin_access::builtin_access): Add range_query field.
(builtin_memref::builtin_memref): Same.
(builtin_memref::extend_offset_range): Same.
(builtin_access::builtin_access): Make work with ranger.
(wrestrict_dom_walker::check_call): Pull out into...
(check_call): ...here.
(check_bounds_or_overlap): Add range_query argument.
* gimple-ssa-warn-restrict.h (check_bounds_or_overlap):
Add range_query and gimple stmt arguments.
2020-10-20 Aldy Hernandez <aldyh@redhat.com>
* gimple-ssa-warn-alloca.c (enum alloca_type): Remove
ALLOCA_BOUND_UNKNOWN and ALLOCA_CAST_FROM_SIGNED.
(warn_limit_specified_p): New.
(alloca_call_type_by_arg): Remove.
(cast_from_signed_p): Remove.
(is_max): Remove.
(alloca_call_type): Remove heuristics and replace with call into
ranger.
(pass_walloca::execute): Instantiate ranger.
2020-10-20 Tobias Burnus <tobias@codesourcery.com>
* lto-wrapper.c (run_gcc): Use proper variable for
%u.ltrans_args dump suffix.
2020-10-20 Zhiheng Xie <xiezhiheng@huawei.com>
Nannan Zheng <zhengnannan@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for get/set reg intrinsics.
2020-10-20 Aldy Hernandez <aldyh@redhat.com>
* gimple-range.cc (gimple_ranger::range_of_builtin_ubsan_call):
Make externally visble...
(range_of_builtin_ubsan_call): ...here. Add range_query argument.
(gimple_ranger::range_of_builtin_call): Make externally visible...
(range_of_builtin_call): ...here. Add range_query argument.
* gimple-range.h (range_of_builtin_call): Move out from class and
make externally visible.
* vr-values.c (vr_values::extract_range_basic): Abstract out
builtin handling to...
(vr_values::range_of_expr): Handle non SSAs.
(vr_values::extract_range_builtin): ...here.
* vr-values.h (class vr_values): Add extract_range_builtin.
(range_of_expr): Rename NAME to EXPR.
2020-10-20 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97501
* gimple-range.cc (gimple_ranger::range_of_ssa_name_with_loop_info):
Saturate overflows returned from SCEV.
2020-10-20 Aldy Hernandez <aldyh@redhat.com>
* value-range.cc (irange::operator=): Split up call to
copy_legacy_range into...
(irange::copy_to_legacy): ...this.
(irange::copy_legacy_to_multi_range): ...and this.
(irange::copy_legacy_range): Remove.
* value-range.h: Remove copoy_legacy_range.
Add copy_legacy_to_multi_range and copy_to_legacy.
2020-10-20 Tobias Burnus <tobias@codesourcery.com>
* doc/invoke.texi (NVPTX options): Use @item not @itemx.
2020-10-20 Richard Biener <rguenther@suse.de>
* tree-cfg.c (reinstall_phi_args): Remove.
(gimple_split_edge): Remove PHIs around the edge redirection
to avoid touching them at all.
2020-10-20 Richard Biener <rguenther@suse.de>
* tree-vect-loop.c (vectorizable_reduction): Use the correct
loops latch edge for the PHI arg lookup.
2020-10-20 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.md (andneghi3): Allow general operand for
op1 and update output assembler template.
2020-10-20 Tobias Burnus <tobias@codesourcery.com>
* collect-utils.c (collect_execute, fork_execute): Add at-file suffix
argument.
* collect-utils.h (collect_execute, fork_execute): Update prototype.
* collect2.c (maybe_run_lto_and_relink, do_link, main, do_dsymutil):
Update calls by passing NULL.
* config/i386/intelmic-mkoffload.c (compile_for_target,
generate_host_descr_file, prepare_target_image, main): Likewise.
* config/gcn/mkoffload.c (compile_native, main): Pass at-file suffix.
* config/nvptx/mkoffload.c (compile_native, main): Likewise.
* lto-wrapper.c (compile_offload_image): Likewise.
2020-10-20 Aldy Hernandez <aldyh@redhat.com>
* range-op.cc (operator_rshift::op1_range): Special case
shifting by zero.
2020-10-20 Richard Biener <rguenther@suse.de>
PR tree-optimization/97496
* tree-vect-slp.c (vect_get_and_check_slp_defs): Guard extern
promotion with not in pattern.
2020-10-20 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
* config/s390/s390.c (s390_expand_vec_strlen): Add alignment
for memory access inside loop.
2020-10-19 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97360
* gimple-range.h (range_compatible_p): New.
* gimple-range-gori.cc (is_gimple_logical_p): Use range_compatible_p.
(range_is_either_true_or_false): Ditto.
(gori_compute::outgoing_edge_range_p): Cast result to the correct
type if necessary.
(logical_stmt_cache::cacheable_p): Use range_compatible_p.
* gimple-range.cc (gimple_ranger::calc_stmt): Check range_compatible_p
before casting the range.
(gimple_ranger::range_on_exit): Use range_compatible_p.
(gimple_ranger::range_on_edge): Ditto.
2020-10-19 Martin Jambor <mjambor@suse.cz>
PR tree-optimization/97456
* tree-complex.c (set_component_ssa_name): Do not replace ignored decl
default definitions with new component vars. Reorder if conditions.
2020-10-19 David Edelsohn <dje.gcc@gmail.com>
* config/rs6000/vsx.md (vextract_fp_from_shorth): Fix vals_be.
(vextract_fp_from_shortl) Same.
2020-10-19 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97488
* range-op.cc (operator_lshift::op1_range): Handle large right shifts.
2020-10-19 Martin Liska <mliska@suse.cz>
* ipa-modref.c (compute_parm_map): Clear vector.
2020-10-19 Richard Biener <rguenther@suse.de>
PR tree-optimization/97486
* tree-vect-slp.c (vect_slp_function): Split after stmts
ending a BB.
2020-10-19 Jonathan Wakely <jwakely@redhat.com>
* doc/invoke.texi (OPptimize Options): Add missing closing
parenthesis.
2020-10-19 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97467
* range-op.cc (operator_lshift::op1_range): Handle shifts by 0.
2020-10-19 Richard Biener <rguenther@suse.de>
PR tree-optimization/97466
* tree-vect-slp.c (vect_get_and_check_slp_defs): Remove
spurious assert, re-indent.
2020-10-19 Li Jia He <helijia@gcc.gnu.org>
PR tree-optimization/66552
* match.pd (x << (n % C) -> x << (n & C-1)): New simplification.
2020-10-19 Richard Biener <rguenther@suse.de>
* tree-cfg.c (verify_gimple_comparison): Drop special-case
for pointer comparison.
2020-10-16 Andrew MacLeod <amacleod@redhat.com>
* vr-values.c (dump_all_value_ranges): Only dump names which are
still active.
2020-10-16 Andrew MacLeod <amacleod@redhat.com>
* range-op.cc (pointer_plus_operator::wi_fold): Make pointer_plus
[0, 0] + const return a [const, const] range.
2020-10-16 Andrew MacLeod <amacleod@redhat.com>
* gimple-ssa-evrp.c (hybrid_folder::value_on_edge): Call
evrp_folder::value_of_expr directly.
(hybrid_folder::value_of_stmt): Ditto.
2020-10-16 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97462
* range-op.cc (operator_lshift::op1_range): Don't trap on negative
shifts.
2020-10-16 Olivier Hainque <hainque@adacore.com>
* config/vxworks.h (VX_CRTBEGIN_SPEC): Likewise.
2020-10-16 Olivier Hainque <hainque@adacore.com>
* config/vxworks/_vxworks-versions.h: Only include
version.h if _WRS_VXWORKS_MAJOR is not defined.
Provide a default _WRS_VXWORKS_MINOR (0).
2020-10-16 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
PR target/97327
* config/arm/arm.c (fp_bitlist): Add isa_bit_mve_float to FP bits array.
2020-10-16 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): For BB
vectorization swap operands only if it helps, demote mismatches to
external.
2020-10-16 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
PR target/97291
* config/arm/arm-builtins.c (arm_strsbwbs_qualifiers): Modify array.
(arm_strsbwbu_qualifiers): Likewise.
(arm_strsbwbs_p_qualifiers): Likewise.
(arm_strsbwbu_p_qualifiers): Likewise.
* config/arm/arm_mve.h (__arm_vstrdq_scatter_base_wb_s64): Modify
function definition.
(__arm_vstrdq_scatter_base_wb_u64): Likewise.
(__arm_vstrdq_scatter_base_wb_p_s64): Likewise.
(__arm_vstrdq_scatter_base_wb_p_u64): Likewise.
(__arm_vstrwq_scatter_base_wb_p_s32): Likewise.
(__arm_vstrwq_scatter_base_wb_p_u32): Likewise.
(__arm_vstrwq_scatter_base_wb_s32): Likewise.
(__arm_vstrwq_scatter_base_wb_u32): Likewise.
(__arm_vstrwq_scatter_base_wb_f32): Likewise.
(__arm_vstrwq_scatter_base_wb_p_f32): Likewise.
* config/arm/arm_mve_builtins.def (vstrwq_scatter_base_wb_add_u): Remove
expansion for the builtin.
(vstrwq_scatter_base_wb_add_s): Likewise.
(vstrwq_scatter_base_wb_add_f): Likewise.
(vstrdq_scatter_base_wb_add_u): Likewise.
(vstrdq_scatter_base_wb_add_s): Likewise.
(vstrwq_scatter_base_wb_p_add_u): Likewise.
(vstrwq_scatter_base_wb_p_add_s): Likewise.
(vstrwq_scatter_base_wb_p_add_f): Likewise.
(vstrdq_scatter_base_wb_p_add_u): Likewise.
(vstrdq_scatter_base_wb_p_add_s): Likewise.
* config/arm/mve.md (mve_vstrwq_scatter_base_wb_<supf>v4si): Remove
expand.
(mve_vstrwq_scatter_base_wb_add_<supf>v4si): Likewise.
(mve_vstrwq_scatter_base_wb_<supf>v4si_insn): Rename pattern to ...
(mve_vstrwq_scatter_base_wb_<supf>v4si): This.
(mve_vstrwq_scatter_base_wb_p_<supf>v4si): Remove expand.
(mve_vstrwq_scatter_base_wb_p_add_<supf>v4si): Likewise.
(mve_vstrwq_scatter_base_wb_p_<supf>v4si_insn): Rename pattern to ...
(mve_vstrwq_scatter_base_wb_p_<supf>v4si): This.
(mve_vstrwq_scatter_base_wb_fv4sf): Remove expand.
(mve_vstrwq_scatter_base_wb_add_fv4sf): Likewise.
(mve_vstrwq_scatter_base_wb_fv4sf_insn): Rename pattern to ...
(mve_vstrwq_scatter_base_wb_fv4sf): This.
(mve_vstrwq_scatter_base_wb_p_fv4sf): Remove expand.
(mve_vstrwq_scatter_base_wb_p_add_fv4sf): Likewise.
(mve_vstrwq_scatter_base_wb_p_fv4sf_insn): Rename pattern to ...
(mve_vstrwq_scatter_base_wb_p_fv4sf): This.
(mve_vstrdq_scatter_base_wb_<supf>v2di): Remove expand.
(mve_vstrdq_scatter_base_wb_add_<supf>v2di): Likewise.
(mve_vstrdq_scatter_base_wb_<supf>v2di_insn): Rename pattern to ...
(mve_vstrdq_scatter_base_wb_<supf>v2di): This.
(mve_vstrdq_scatter_base_wb_p_<supf>v2di): Remove expand.
(mve_vstrdq_scatter_base_wb_p_add_<supf>v2di): Likewise.
(mve_vstrdq_scatter_base_wb_p_<supf>v2di_insn): Rename pattern to ...
(mve_vstrdq_scatter_base_wb_p_<supf>v2di): This.
2020-10-16 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/multilib-generator (IMPLIED_EXT): New.
(arch_canonicalize): Update comment and handle implied extensions.
2020-10-16 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): First analyze
all operands and fill in the def_stmts and ops entries.
(vect_def_types_match): New helper.
2020-10-16 Martin Liska <mliska@suse.cz>
PR ipa/97404
* ipa-prop.c (struct ipa_vr_ggc_hash_traits):
Compare types of VRP as we can merge ranges of different types.
2020-10-16 Richard Biener <rguenther@suse.de>
PR tree-optimization/97428
* tree-vect-slp.c (vect_analyze_slp_instance): Split store
groups also for loop vectorization.
2020-10-15 Tom de Vries <tdevries@suse.de>
PR target/97436
* config/nvptx/nvptx.opt (m32): Comment out.
* doc/invoke.texi (NVPTX options): Remove -m32.
2020-10-15 Jan Hubicka <hubicka@ucw.cz>
Richard Biener <rguenther@suse.de>
* attr-fnspec.h: Fix toplevel comment.
2020-10-15 Richard Biener <rguenther@suse.de>
* tree-pretty-print.c (dump_mem_ref): Print constant offset
also for TARGET_MEM_REF.
2020-10-15 Jan Hubicka <jh@suse.cz>
* symtab.c (symtab_node::binds_to_current_def_p): Also accept symbols
defined in other partition.
2020-10-15 Richard Biener <rguenther@suse.de>
* tree-vect-loop.c (vectorizable_live_operation): Adjust
dominance query.
2020-10-15 Richard Biener <rguenther@suse.de>
PR tree-optimization/97482
* tree-data-ref.c (split_constant_offset_1): Handle
trivial conversions better.
* fold-const.c (convert_to_ptrofftype_loc): Elide conversion
if the offset is already ptrofftype_p.
2020-10-15 Martin Liska <mliska@suse.cz>
PR ipa/97295
* profile-count.c (profile_count::to_frequency): Move part of
gcc_assert to STATIC_ASSERT.
* regs.h (REG_FREQ_FROM_BB): Do not use count.to_frequency for
a function that does not have count_max initialized.
2020-10-15 Jakub Jelinek <jakub@redhat.com>
* params.opt (-param-ipa-jump-function-lookups=): Add full stop at
the end of the parameter description.
2020-10-15 Kito Cheng <kito.cheng@sifive.com>
* common/config/riscv/riscv-common.c (riscv_cpu_tables): New.
(riscv_arch_str): Return empty string if current_subset_list
is NULL.
(riscv_find_cpu): New.
(riscv_handle_option): Verify option value of -mcpu.
(riscv_expand_arch): Using std::string.
(riscv_default_mtune): New.
(riscv_expand_arch_from_cpu): Ditto.
* config/riscv/riscv-cores.def: New.
* config/riscv/riscv-protos.h (riscv_find_cpu): New.
(riscv_cpu_info): New.
* config/riscv/riscv.c (riscv_tune_info): Rename ...
(riscv_tune_param): ... to this.
(riscv_cpu_info): Rename ...
(riscv_tune_info): ... to this.
(tune_info): Rename ...
(tune_param): ... to this.
(rocket_tune_info): Update data type name.
(sifive_7_tune_info): Ditto.
(optimize_size_tune_info): Ditto.
(riscv_cpu_info_table): Rename ...
(riscv_tune_info_table): ... to this.
(riscv_parse_cpu): Rename ...
(riscv_parse_tune): ... to this, and translate valid -mcpu option to
-mtune option.
(riscv_rtx_costs): Rename tune_info to tune_param.
(riscv_class_max_nregs): Ditto.
(riscv_memory_move_cost): Ditto.
(riscv_init_machine_status): Use value of -mcpu if -mtune is not
given, and rename tune_info to tune_param.
* config/riscv/riscv.h (riscv_expand_arch_from_cpu): New.
(riscv_default_mtune): Ditto.
(EXTRA_SPEC_FUNCTIONS): Add riscv_expand_arch_from_cpu and
riscv_default_mtune.
(OPTION_DEFAULT_SPECS): Handle default value of -march/-mabi.
(DRIVER_SELF_SPECS): Expand -march from -mcpu if -march is not
given.
* config/riscv/riscv.opt (-mcpu): New option.
* config/riscv/t-riscv ($(common_out_file)): Add
riscv-cores.def to dependency.
* doc/invoke.texi (RISC-V Option): Add -mcpu, and update the
description of default value for -mtune and -march.
2020-10-15 Hongyu Wang <hongyu.wang@intel.com>
* common/config/i386/cpuinfo.h (get_available_features):
Detect HRESET.
* common/config/i386/i386-common.c (OPTION_MASK_ISA2_HRESET_SET,
OPTION_MASK_ISA2_HRESET_UNSET): New macros.
(ix86_handle_option): Handle -mhreset.
* common/config/i386/i386-cpuinfo.h (enum processor_features):
Add FEATURE_HRESET.
* common/config/i386/i386-isas.h: Add ISA_NAMES_TABLE_ENTRY
for hreset.
* config.gcc: Add hresetintrin.h
* config/i386/hresetintrin.h: New header file.
* config/i386/x86gprintrin.h: Include hresetintrin.h.
* config/i386/cpuid.h (bit_HRESET): New.
* config/i386/i386-builtin.def: Add new builtin.
* config/i386/i386-expand.c (ix86_expand_builtin):
Handle new builtin.
* config/i386/i386-c.c (ix86_target_macros_internal): Define
__HRESET__.
* config/i386/i386-options.c (isa2_opts): Add -mhreset.
(ix86_valid_target_attribute_inner_p): Handle hreset.
* config/i386/i386.h (TARGET_HRESET, TARGET_HRESET_P,
PTA_HRESET): New.
(PTA_ALDERLAKE): Add PTA_HRESET.
* config/i386/i386.opt: Add option -mhreset.
* config/i386/i386.md (UNSPECV_HRESET): New unspec.
(hreset): New define_insn.
* doc/invoke.texi: Document -mhreset.
* doc/extend.texi: Document hreset.
2020-10-15 Hongtao Liu <hongtao.liu@intel.com>
* common/config/i386/cpuinfo.h (get_available_features):
Detect UINTR.
* common/config/i386/i386-common.c (OPTION_MASK_ISA2_UINTR_SET
OPTION_MASK_ISA2_UINTR_UNSET): New.
(ix86_handle_option): Handle -muintr.
* common/config/i386/i386-cpuinfo.h (enum processor_features):
Add FEATURE_UINTR.
* common/config/i386/i386-isas.h: Add ISA_NAMES_TABLE_ENTRY
for uintr.
* config.gcc: Add uintrintrin.h to extra_headers.
* config/i386/uintrintrin.h: New.
* config/i386/cpuid.h (bit_UINTR): New.
* config/i386/i386-builtin-types.def: Add new types.
* config/i386/i386-builtin.def: Add new builtins.
* config/i386/i386-builtins.c (ix86_init_mmx_sse_builtins): Add
__builtin_ia32_testui.
* config/i386/i386-builtins.h (ix86_builtins): Add
IX86_BUILTIN_TESTUI.
* config/i386/i386-c.c (ix86_target_macros_internal): Define
__UINTR__.
* config/i386/i386-expand.c (ix86_expand_special_args_builtin):
Handle UINT8_FTYPE_VOID.
(ix86_expand_builtin): Handle IX86_BUILTIN_TESTUI.
* config/i386/i386-options.c (isa2_opts): Add -muintr.
(ix86_valid_target_attribute_inner_p): Handle UINTR.
(ix86_option_override_internal): Add TARGET_64BIT check for UINTR.
* config/i386/i386.h (TARGET_UINTR, TARGET_UINTR_P, PTA_UINTR): New.
(PTA_SAPPHIRRAPIDS): Add PTA_UINTR.
* config/i386/i386.opt: Add -muintr.
* config/i386/i386.md
(define_int_iterator UINTR_UNSPECV): New.
(define_int_attr uintr_unspecv): New.
(uintr_<uintr_unspecv>, uintr_senduipi, testui):
New define_insn patterns.
* config/i386/x86gprintrin.h: Include uintrintrin.h
* doc/invoke.texi: Document -muintr.
* doc/extend.texi: Document uintr.
2020-10-14 Martin Sebor <msebor@redhat.com>
PR middle-end/97391
* builtins.c (gimple_parm_array_size): Peel off one less layer
of array types.
2020-10-14 Martin Sebor <msebor@redhat.com>
PR c/97413
* attribs.c (init_attr_rdwr_indices): Unwrap extra list layer.
2020-10-14 Sunil K Pandey <skpgkp2@gmail.com>
PR target/95483
* config/i386/avx2intrin.h (_mm_broadcastsi128_si256): New intrinsics.
(_mm_broadcastsd_pd): Ditto.
* config/i386/avx512bwintrin.h (_mm512_loadu_epi16): New intrinsics.
(_mm512_storeu_epi16): Ditto.
(_mm512_loadu_epi8): Ditto.
(_mm512_storeu_epi8): Ditto.
* config/i386/avx512dqintrin.h (_mm_reduce_round_sd): New intrinsics.
(_mm_mask_reduce_round_sd): Ditto.
(_mm_maskz_reduce_round_sd): Ditto.
(_mm_reduce_round_ss): Ditto.
(_mm_mask_reduce_round_ss): Ditto.
(_mm_maskz_reduce_round_ss): Ditto.
(_mm512_reduce_round_pd): Ditto.
(_mm512_mask_reduce_round_pd): Ditto.
(_mm512_maskz_reduce_round_pd): Ditto.
(_mm512_reduce_round_ps): Ditto.
(_mm512_mask_reduce_round_ps): Ditto.
(_mm512_maskz_reduce_round_ps): Ditto.
* config/i386/avx512erintrin.h
(_mm_mask_rcp28_round_sd): New intrinsics.
(_mm_maskz_rcp28_round_sd): Ditto.
(_mm_mask_rcp28_round_ss): Ditto.
(_mm_maskz_rcp28_round_ss): Ditto.
(_mm_mask_rsqrt28_round_sd): Ditto.
(_mm_maskz_rsqrt28_round_sd): Ditto.
(_mm_mask_rsqrt28_round_ss): Ditto.
(_mm_maskz_rsqrt28_round_ss): Ditto.
(_mm_mask_rcp28_sd): Ditto.
(_mm_maskz_rcp28_sd): Ditto.
(_mm_mask_rcp28_ss): Ditto.
(_mm_maskz_rcp28_ss): Ditto.
(_mm_mask_rsqrt28_sd): Ditto.
(_mm_maskz_rsqrt28_sd): Ditto.
(_mm_mask_rsqrt28_ss): Ditto.
(_mm_maskz_rsqrt28_ss): Ditto.
* config/i386/avx512fintrin.h (_mm_mask_sqrt_sd): New intrinsics.
(_mm_maskz_sqrt_sd): Ditto.
(_mm_mask_sqrt_ss): Ditto.
(_mm_maskz_sqrt_ss): Ditto.
(_mm_mask_scalef_sd): Ditto.
(_mm_maskz_scalef_sd): Ditto.
(_mm_mask_scalef_ss): Ditto.
(_mm_maskz_scalef_ss): Ditto.
(_mm_mask_cvt_roundsd_ss): Ditto.
(_mm_maskz_cvt_roundsd_ss): Ditto.
(_mm_mask_cvt_roundss_sd): Ditto.
(_mm_maskz_cvt_roundss_sd): Ditto.
(_mm_mask_cvtss_sd): Ditto.
(_mm_maskz_cvtss_sd): Ditto.
(_mm_mask_cvtsd_ss): Ditto.
(_mm_maskz_cvtsd_ss): Ditto.
(_mm512_cvtsi512_si32): Ditto.
(_mm_cvtsd_i32): Ditto.
(_mm_cvtss_i32): Ditto.
(_mm_cvti32_sd): Ditto.
(_mm_cvti32_ss): Ditto.
(_mm_cvtsd_i64): Ditto.
(_mm_cvtss_i64): Ditto.
(_mm_cvti64_sd): Ditto.
(_mm_cvti64_ss): Ditto.
* config/i386/avx512vlbwintrin.h (_mm256_storeu_epi8): New intrinsics.
(_mm_storeu_epi8): Ditto.
(_mm256_loadu_epi16): Ditto.
(_mm_loadu_epi16): Ditto.
(_mm256_loadu_epi8): Ditto.
(_mm_loadu_epi8): Ditto.
(_mm256_storeu_epi16): Ditto.
(_mm_storeu_epi16): Ditto.
* config/i386/avx512vlintrin.h (_mm256_load_epi64): New intrinsics.
(_mm_load_epi64): Ditto.
(_mm256_load_epi32): Ditto.
(_mm_load_epi32): Ditto.
(_mm256_store_epi32): Ditto.
(_mm_store_epi32): Ditto.
(_mm256_loadu_epi64): Ditto.
(_mm_loadu_epi64): Ditto.
(_mm256_loadu_epi32): Ditto.
(_mm_loadu_epi32): Ditto.
(_mm256_mask_cvt_roundps_ph): Ditto.
(_mm256_maskz_cvt_roundps_ph): Ditto.
(_mm_mask_cvt_roundps_ph): Ditto.
(_mm_maskz_cvt_roundps_ph): Ditto.
* config/i386/avxintrin.h (_mm256_cvtsi256_si32): New intrinsics.
* config/i386/emmintrin.h (_mm_loadu_si32): New intrinsics.
(_mm_loadu_si16): Ditto.
(_mm_storeu_si32): Ditto.
(_mm_storeu_si16): Ditto.
* config/i386/i386-builtin-types.def
(V8DF_FTYPE_V8DF_INT_V8DF_UQI_INT): Add new type.
(V16SF_FTYPE_V16SF_INT_V16SF_UHI_INT): Ditto.
(V4SF_FTYPE_V4SF_V2DF_V4SF_UQI_INT): Ditto.
(V2DF_FTYPE_V2DF_V4SF_V2DF_UQI_INT): Ditto.
* config/i386/i386-builtin.def
(__builtin_ia32_cvtsd2ss_mask_round): New builtin.
(__builtin_ia32_cvtss2sd_mask_round): Ditto.
(__builtin_ia32_rcp28sd_mask_round): Ditto.
(__builtin_ia32_rcp28ss_mask_round): Ditto.
(__builtin_ia32_rsqrt28sd_mask_round): Ditto.
(__builtin_ia32_rsqrt28ss_mask_round): Ditto.
(__builtin_ia32_reducepd512_mask_round): Ditto.
(__builtin_ia32_reduceps512_mask_round): Ditto.
(__builtin_ia32_reducesd_mask_round): Ditto.
(__builtin_ia32_reducess_mask_round): Ditto.
* config/i386/i386-expand.c
(ix86_expand_round_builtin): Expand round builtin for new type.
(V8DF_FTYPE_V8DF_INT_V8DF_UQI_INT)
(V16SF_FTYPE_V16SF_INT_V16SF_UHI_INT)
(V4SF_FTYPE_V4SF_V2DF_V4SF_UQI_INT)
(V2DF_FTYPE_V2DF_V4SF_V2DF_UQI_INT)
* config/i386/mmintrin.h ()
Define datatype __m32 and __m16.
Define datatype __m32_u and __m16_u.
* config/i386/sse.md: Adjust pattern.
(<mask_codefor>reducep<mode><mask_name><round_saeonly_name>): Adjust.
(reduces<mode><mask_scalar_name><round_saeonly_scalar_name>): Ditto.
(sse2_cvtsd2ss<mask_name><round_name>): Ditto.
(sse2_cvtss2sd<mask_name><round_saeonly_name>): Ditto.
(avx512er_vmrcp28<mode><mask_name><round_saeonly_name>): Ditto.
(avx512er_vmrsqrt28<mode><mask_name><round_saeonly_name>): Ditto.
2020-10-14 Olivier Hainque <hainque@adacore.com>
* config/arm/vxworks.h (TARGET_OS_CPP_BUILTINS): Fix
the VX_CPU selection for -mcpu=xscale on arm-vxworks.
2020-10-14 Olivier Hainque <hainque@adacore.com>
* config/rs6000/vxworks.h (TARGET_OS_CPP_BUILTINS): Accommodate
expectations from different versions of VxWorks, for 32 or 64bit
configurations.
2020-10-14 Olivier Hainque <hainque@adacore.com>
* config/vxworks.h: #undef CPLUSPLUS_CPP_SPEC.
2020-10-14 Olivier Hainque <hainque@adacore.com>
* config/t-vxworks: Adjust the VxWorks alternative LIMITS_H guard
for glimits.h, make it both closer to the previous one and easier to
search for.
2020-10-14 Jakub Jelinek <jakub@redhat.com>
PR target/97387
* config/i386/i386.md (CC_CCC): New mode iterator.
(*setcc_qi_addqi3_cconly_overflow_1_<mode>): New
define_insn_and_split.
* config/i386/i386.c (ix86_cc_mode): Return CCCmode
for *setcc_qi_addqi3_cconly_overflow_1_<mode> pattern operands.
(ix86_rtx_costs): Return true and *total = 0;
for *setcc_qi_addqi3_cconly_overflow_1_<mode> pattern. Use op0 and
op1 temporaries to simplify COMPARE checks.
2020-10-14 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97396
* gimple-range.cc (gimple_ranger::range_of_phi): Do not call
range_of_ssa_name_with_loop_info with the loop tree root.
2020-10-14 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): Split out
test for compatible operand types.
2020-10-14 Olivier Hainque <hainque@adacore.com>
* config/vxworks.c (vxworks_override_options): Guard pic checks with
flag_pic > 0 instead of just flag_pic.
2020-10-14 Jan Hubicka <hubicka@ucw.cz>
* ipa-fnsummary.c (remap_edge_summaries): Make offset_map HOST_WIDE_INT.
(remap_freqcounting_predicate): Likewise.
(ipa_merge_fn_summary_after_inlining): Likewise.
* ipa-predicate.c (predicate::remap_after_inlining): Likewise
* ipa-predicate.h (remap_after_inlining): Update.
2020-10-14 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (compute_parm_map): Handle POINTER_PLUS_EXPR in
PASSTHROUGH.
2020-10-14 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): Move
check for duplicate/interleave of variable size constants
to a place done once and early.
(vect_build_slp_tree_2): Adjust heuristics when to build
a BB SLP node from scalars.
2020-10-14 Tom de Vries <tdevries@suse.de>
* tracer.c (cached_can_duplicate_bb_p, analyze_bb): Use
can_duplicate_block_p.
(can_duplicate_insn_p, can_duplicate_bb_no_insn_iter_p)
(can_duplicate_bb_p): Move and merge ...
* tree-cfg.c (gimple_can_duplicate_bb_p): ... here.
2020-10-14 Jan Hubicka <hubicka@ucw.cz>
* doc/invoke.texi: (ipa-jump-function-lookups): Document param.
* ipa-modref.c (merge_call_side_effects): Use
unadjusted_ptr_and_unit_offset.
* ipa-prop.c (unadjusted_ptr_and_unit_offset): New function.
* ipa-prop.h (unadjusted_ptr_and_unit_offset): Declare.
* params.opt: (-param-ipa-jump-function-lookups): New.
2020-10-14 Jan Hubicka <jh@suse.cz>
PR bootstrap/97350
* ipa-modref.c (ignore_edge): Do not ignore inlined edes.
(ipa_merge_modref_summary_after_inlining): Improve debug output and
fix parameter of ignore_stores_p.
2020-10-14 Kito Cheng <kito.cheng@sifive.com>
PR target/96759
* expr.c (expand_assignment): Handle misaligned stores with PARALLEL
value.
2020-10-13 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97386
* combine.c (simplify_shift_const_1): Don't optimize nested ROTATEs if
they have different modes.
2020-10-13 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97379
* gimple-range-edge.cc (outgoing_range::calc_switch_ranges): Do
not save hash slot across calls to hash_table<>::get_or_insert.
2020-10-13 Tobias Burnus <tobias@codesourcery.com>
* lto-wrapper.c (find_crtoffloadtable): Fix last commit
by adding NULL as last argument to concat.
2020-10-13 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/aarch64/aarch64.c (neoversen2_tunings): Define.
* config/aarch64/aarch64-cores.def (neoverse-n2): Use it.
2020-10-13 Tobias Burnus <tobias@codesourcery.com>
* lto-wrapper.c (find_crtoffloadtable): With -save-temps,
use non-temp file name utilizing the dump prefix.
(run_gcc): Update call.
2020-10-13 Richard Biener <rguenther@suse.de>
PR tree-optimization/97382
* tree-vectorizer.h (_stmt_vec_info::same_align_refs): Remove.
(STMT_VINFO_SAME_ALIGN_REFS): Likewise.
* tree-vectorizer.c (vec_info::new_stmt_vec_info): Do not
allocate STMT_VINFO_SAME_ALIGN_REFS.
(vec_info::free_stmt_vec_info): Do not release
STMT_VINFO_SAME_ALIGN_REFS.
* tree-vect-data-refs.c (vect_analyze_data_ref_dependences):
Do not compute self and read-read dependences.
(vect_dr_aligned_if_related_peeled_dr_is): New helper.
(vect_dr_aligned_if_peeled_dr_is): Likewise.
(vect_update_misalignment_for_peel): Use it instead of
iterating over STMT_VINFO_SAME_ALIGN_REFS.
(dr_align_group_sort_cmp): New function.
(vect_enhance_data_refs_alignment): Count the number of
same aligned refs here and elide uses of STMT_VINFO_SAME_ALIGN_REFS.
(vect_find_same_alignment_drs): Remove.
(vect_analyze_data_refs_alignment): Do not call it.
* vec.h (auto_vec<T, 0>::auto_vec): Adjust CTOR to take
a vec<>&&, assert it isn't using auto storage.
(auto_vec& operator=): Apply a similar change.
2020-10-13 Tobias Burnus <tobias@codesourcery.com>
* config/nvptx/mkoffload.c (main): Add missing fclose (in).
2020-10-13 Zhiheng Xie <xiezhiheng@huawei.com>
Nannan Zheng <zhengnannan@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for mul/mla/mls intrinsics.
2020-10-13 Jakub Jelinek <jakub@redhat.com>
* omp-low.c (add_taskreg_looptemp_clauses): For triangular loops
with non-constant number of iterations add another 4 _looptemp_
clauses before the (optional) one for lastprivate.
(lower_omp_for_lastprivate): Skip those clauses when looking for
the lastprivate clause.
(lower_omp_for): For triangular loops with non-constant number of
iterations add another 4 _looptemp_ clauses.
* omp-expand.c (expand_omp_for_init_counts): For triangular loops
with non-constant number of iterations set counts[0],
fd->first_inner_iterations, fd->factor and fd->adjn1 from the newly
added _looptemp_ clauses.
(expand_omp_for_init_vars): Initialize the newly added _looptemp_
clauses.
(find_lastprivate_looptemp): New function.
(expand_omp_for_static_nochunk, expand_omp_for_static_chunk,
expand_omp_taskloop_for_outer): Use it instead of manually skipping
_looptemp_ clauses.
2020-10-13 Jan Hubicka <hubicka@ucw.cz>
PR ipa/97389
* ipa-modref.c (dump_lto_records): Fix formating of dump file.
(modref_summary::dump): Do not check loads to be non-null.
(modref_summary_lto::dump): Do not check loads to be non-null.
(merge_call_side_effects): Improve debug output.
(analyze_call): Crash when cur_summary->loads is NULL.
(analyze_function): Update.
(modref_summaries::insert): Insert only into summaries, not
optimization_summaries.
(modref_summaries::duplicate): Likewise; crash when load or sotres
are NULL.
(modref_summaries_lto::duplicate): Crash when loads or stores are NULL.
(write_modref_records): param_index is signed.
(read_modref_records): param_index is signed.
(modref_write): Crash when loads or stores are NULL.
(read_section): Compensate previous change.
(pass_modref::execute): Do not check optimization_summaries t be
non-NULL.
(ignore_edge): Fix.
(compute_parm_map): Fix formating.
(modref_propagate_in_scc): Do not expect loads/stores to be NULL.
2020-10-12 Alexandre Oliva <oliva@adacore.com>
* builtins.c (mathfn_built_in_type): Use CFN_ enumerators.
2020-10-12 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97381
* gimple-range-gori.cc (gori_compute::compute_operand2_range): If a range cannot be
calculated through operand 2, return false.
2020-10-12 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97378
* range-op.cc (operator_trunc_mod::wi_fold): Return VARYING for mod by zero.
2020-10-12 David Malcolm <dmalcolm@redhat.com>
* doc/invoke.texi: Document -Wanalyzer-write-to-const and
-Wanalyzer-write-to-string-literal.
2020-10-12 Martin Sebor <msebor@redhat.com>
PR middle-end/97342
PR middle-end/97023
PR middle-end/96384
* builtins.c (access_ref::access_ref): Initialize new member. Use
new enum.
(access_ref::size_remaining): Define new member function.
(inform_access): Handle expressions referencing objects.
(gimple_call_alloc_size): Call get_size_range instead of get_range.
(gimple_call_return_array): New function.
(get_range): Rename...
(get_offset_range): ...to this. Improve detection of ranges from
types of expressions.
(gimple_call_return_array): Adjust calls to get_range per above.
(compute_objsize): Same. Set maximum size or offset instead of
failing for unknown objects and handle more kinds of expressions.
(compute_objsize): Call access_ref::size_remaining.
(compute_objsize): Have transitional wrapper fail for pointers
into unknown objects.
(expand_builtin_strncmp): Call access_ref::size_remaining and
handle new cases.
* builtins.h (access_ref::size_remaining): Declare new member function.
(access_ref::set_max_size_range): Define new member function.
(access_ref::add_ofset, access_ref::add_max_ofset): Same.
(access_ref::add_base0): New data member.
* calls.c (get_size_range): Change argument type. Handle new
condition.
* calls.h (get_size_range): Adjust signature.
(enum size_range_flags): Define new type.
* gimple-ssa-warn-restrict.c (builtin_memref::builtin_memref): Correct
argument to get_size_range.
* tree-ssa-strlen.c (get_range): Handle anti-ranges.
(maybe_warn_overflow): Check DECL_P before assuming it's one.
2020-10-12 Martin Sebor <msebor@redhat.com>
PR c++/96511
PR middle-end/96384
* builtins.c (get_range): Return full range of type when neither
value nor its range is available. Fail for ranges inverted due
to the signedness of offsets.
(compute_objsize): Handle more special array members. Handle
POINTER_PLUS_EXPR and VIEW_CONVERT_EXPR that come up in front end
code.
(access_ref::offset_bounded): Define new member function.
* builtins.h (access_ref::eval): New data member.
(access_ref::offset_bounded): New member function.
(access_ref::offset_zero): New member function.
(compute_objsize): Declare a new overload.
* gimple-array-bounds.cc (array_bounds_checker::check_array_ref): Use
enum special_array_member.
* tree.c (component_ref_size): Use special_array_member.
* tree.h (special_array_member): Define a new type.
(component_ref_size): Change signature.
2020-10-12 Jan Hubicka <hubicka@ucw.cz>
* ipa-modref.c (modref_summaries): Remove field IPA.
(class modref_summary_lto): New global variable.
(class modref_summaries_lto): New.
(modref_summary::modref_summary): Remove loads_lto and stores_lto.
(modref_summary::~modref_summary): Remove loads_lto and stores_lto.
(modref_summary::useful_p): Do not use lto_useful.
(modref_records_lto): New typedef.
(struct modref_summary_lto): New type.
(modref_summary_lto::modref_summary_lto): New member function.
(modref_summary_lto::~modref_summary_lto): New member function.
(modref_summary_lto::useful_p): New member function.
(modref_summary::dump): Do not handle lto.
(modref_summary_lto::dump): New member function.
(get_modref_function_summary): Use optimization_summary.
(merge_call_side_effects): Use optimization_summary.
(analyze_call): Use optimization_summary.
(struct summary_ptrs): New struture.
(analyze_load): Update to handle separate lto and non-lto summaries.
(analyze_store): Likewise.
(analyze_stmt): Likewise.
(remove_summary): Break out from ...
(analyze_function): ... here; update to handle seprated summaries.
(modref_summaries::insert): Do not handle lto summary.
(modref_summaries_lto::insert): New member function.
(modref_summaries::duplicate): Do not handle lto summary.
(modref_summaries_lto::duplicate): New member function.
(read_modref_records): Expect nolto_ret or lto_ret to be NULL>
(modref_write): Write lto summary.
(read_section): Handle separated summaries.
(modref_read): Initialize separated summaries.
(modref_transform): Handle separated summaries.
(pass_modref::execute): Turn summary to optimization_summary; handle
separate summaries.
(ignore_edge): Handle separate summaries.
(ipa_merge_modref_summary_after_inlining): Likewise.
(collapse_loads): Likewise.
(modref_propagate_in_scc): Likewise.
(pass_ipa_modref::execute): Likewise.
(ipa_modref_c_finalize): Likewise.
* ipa-modref.h (modref_records_lto): Remove typedef.
(struct modref_summary): Remove stores_lto, loads_lto and finished
fields; remove lto_useful_p member function.
2020-10-12 Richard Biener <rguenther@suse.de>
* tree-vect-data-refs.c (vect_slp_analyze_instance_dependence):
Use SLP_TREE_REPRESENTATIVE.
* tree-vectorizer.h (_slp_tree::vertex): New member used
for graphds interfacing.
* tree-vect-slp.c (vect_build_slp_tree_2): Allocate space
for PHI SLP children.
(vect_analyze_slp_backedges): New function filling in SLP
node children for PHIs that correspond to backedge values.
(vect_analyze_slp): Call vect_analyze_slp_backedges for the
graph.
(vect_slp_analyze_node_operations): Deal with a cyclic graph.
(vect_schedule_slp_instance): Likewise.
(vect_schedule_slp): Likewise.
(slp_copy_subtree): Remove.
(vect_slp_rearrange_stmts): Likewise.
(vect_attempt_slp_rearrange_stmts): Likewise.
(vect_slp_build_vertices): New functions.
(vect_slp_permute): Likewise.
(vect_slp_perms_eq): Likewise.
(vect_optimize_slp): Remove special code to elide
permutations with SLP reductions. Implement generic
permute optimization.
2020-10-12 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/arm.c (arm_preferred_simd_mode): Use E_FOOmode
instead of FOOmode.
2020-10-12 Martin Liska <mliska@suse.cz>
PR tree-optimization/97079
* internal-fn.c (internal_fn_stored_value_index): Handle also
.MASK_STORE_LANES.
* tree-vect-patterns.c (vect_recog_over_widening_pattern): Bail
out for unsupported TREE_TYPE.
2020-10-12 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_bb_partition_graph_r): Use visited
hash-map.
(vect_bb_partition_graph): Likewise.
2020-10-12 Duan bo <duanbo3@huawei.com>
PR target/96757
* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): Add
the identification and handling of the dropped situation in the
cond expression processing phase.
2020-10-12 Tobias Burnus <tobias@codesourcery.com>
* doc/invoke.texi (nvptx's -misa): Update default to sm_35.
2020-10-12 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/97349
* config/aarch64/arm_neon.h (vdupq_n_p8, vdupq_n_p16,
vdupq_n_p64, vdupq_n_s8, vdupq_n_s16, vdupq_n_u8, vdupq_n_u16):
Fix argument type.
2020-10-12 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/s390-protos.h (s390_build_signbit_mask): New
function.
* config/s390/s390.c (s390_contiguous_bitmask_vector_p):
Bitcast the argument to an integral mode.
(s390_expand_vec_init): Do not call
s390_contiguous_bitmask_vector_p with a scalar argument.
(s390_build_signbit_mask): New function.
* config/s390/vector.md (copysign<mode>3): Use bitwise
operations.
2020-10-12 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97371
* range-op.cc (operator_rshift::op1_range): Ignore shifts larger than
or equal to type precision.
2020-10-12 Martin Liska <mliska@suse.cz>
* ipa-modref.c (merge_call_side_effects): Clear modref_parm_map
fields in the vector.
2020-10-12 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_analyze_slp_instance): Set matches to true
after successful discovery but forced split.
2020-10-12 Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.opt (-msoft-stack-reserve-local): Rename to ...
(-msoft-stack-reserve-local=): ... this.
2020-10-12 Richard Biener <rguenther@suse.de>
PR tree-optimization/97357
* tree-ssa-loop-split.c (ssa_semi_invariant_p): Abnormal
SSA names are not semi invariant.
2020-10-11 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_globalize_label): Make a subset of
metadate symbols global.
(darwin_label_is_anonymous_local_objc_name): Make a subset of
metadata symbols linker-visible.
(darwin_override_options): Track more target OS versions, make
the next_runtime version track this (unless it's set to 0 for
GNU runtime).
2020-10-11 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_globalize_label): Add protocol
meta-data labels to the set that are global.
(darwin_label_is_anonymous_local_objc_name): Arrange for meta-
data start labels to be linker-visible.
2020-10-11 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_objc2_section): Allow for
values > 1 to represent the next runtime.
(darwin_objc1_section): Likewise.
* config/darwin.h (NEXT_OBJC_RUNTIME): Set the default
next runtime value to be 10.5.8.
2020-10-10 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_transform): Fix parameter map computation.
2020-10-10 Tom de Vries <tdevries@suse.de>
PR target/97318
* config/nvptx/nvptx.c (nvptx_replace_dot): New function.
(write_fn_proto, write_fn_proto_from_insn, nvptx_output_call_insn):
Use nvptx_replace_dot.
2020-10-10 Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.c (write_fn_proto_1): New function, factored out
of ...
(write_fn_proto): ... here. Return void.
2020-10-10 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (remap_arguments): Check range in map access.
2020-10-10 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_transform): Use reserve instead of safe_grow.
2020-10-10 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_transform): Check that summaries are allocated.
2020-10-10 Jan Hubicka <jh@suse.cz>
* ipa-modref-tree.h (struct modref_tree): Revert prevoius change.
* ipa-modref.c (analyze_function): Dump original summary.
(modref_read): Only set IPA if streaming summary (not optimization
summary).
(remap_arguments): New function.
(modref_transform): New function.
(compute_parm_map): Fix offset calculation.
(ipa_merge_modref_summary_after_inlining): Do not merge stores when
they can be ignored.
2020-10-10 Jan Hubicka <jh@suse.cz>
* tree-ssa-alias.c (ref_maybe_used_by_call_p_1): Improve debug dumps.
(call_may_clobber_ref_p_1): Improve debug dumps.
2020-10-10 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (output_objc_section_asm_op): Avoid extra
objective-c section switches unless the linker needs them.
2020-10-10 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-sections.def (objc2_data_section): New.
(objc2_ivar_section): New.
* config/darwin.c (darwin_objc2_section): Act on Protocol and
ivar refs.
2020-10-10 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-sections.def (objc2_class_names_section,
objc2_method_names_section, objc2_method_types_section): New
* config/darwin.c (output_objc_section_asm_op): Output new
sections. (darwin_objc2_section): Select new sections where
used.
2020-10-10 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_emit_local_bss): Amend section names to
match system tools. (darwin_output_aligned_bss): Likewise.
2020-10-10 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97359
* gimple-range-gori.cc (logical_stmt_cache::cacheable_p): Only
handle ANDs and ORs.
(gori_compute_cache::cache_stmt): Adjust comment.
2020-10-09 Vladimir Makarov <vmakarov@redhat.com>
PR rtl-optimization/97313
* lra-constraints.c (match_reload): Don't keep strict_low_part in
reloads for non-registers.
2020-10-09 H.J. Lu <hjl.tools@gmail.com>
PR target/97148
* config.gcc (extra_headers): Add x86gprintrin.h.
* config/i386/adxintrin.h: Check _X86GPRINTRIN_H_INCLUDED for
<x86gprintrin.h>.
* config/i386/bmi2intrin.h: Likewise.
* config/i386/bmiintrin.h: Likewise.
* config/i386/cetintrin.h: Likewise.
* config/i386/cldemoteintrin.h: Likewise.
* config/i386/clflushoptintrin.h: Likewise.
* config/i386/clwbintrin.h: Likewise.
* config/i386/enqcmdintrin.h: Likewise.
* config/i386/fxsrintrin.h: Likewise.
* config/i386/ia32intrin.h: Likewise.
* config/i386/lwpintrin.h: Likewise.
* config/i386/lzcntintrin.h: Likewise.
* config/i386/movdirintrin.h: Likewise.
* config/i386/pconfigintrin.h: Likewise.
* config/i386/pkuintrin.h: Likewise.
* config/i386/rdseedintrin.h: Likewise.
* config/i386/rtmintrin.h: Likewise.
* config/i386/serializeintrin.h: Likewise.
* config/i386/tbmintrin.h: Likewise.
* config/i386/tsxldtrkintrin.h: Likewise.
* config/i386/waitpkgintrin.h: Likewise.
* config/i386/wbnoinvdintrin.h: Likewise.
* config/i386/xsavecintrin.h: Likewise.
* config/i386/xsaveintrin.h: Likewise.
* config/i386/xsaveoptintrin.h: Likewise.
* config/i386/xsavesintrin.h: Likewise.
* config/i386/xtestintrin.h: Likewise.
* config/i386/immintrin.h: Include <x86gprintrin.h> instead of
<fxsrintrin.h>, <xsaveintrin.h>, <xsaveoptintrin.h>,
<xsavesintrin.h>, <xsavecintrin.h>, <lzcntintrin.h>,
<bmiintrin.h>, <bmi2intrin.h>, <xtestintrin.h>, <cetintrin.h>,
<movdirintrin.h>, <sgxintrin.h, <pconfigintrin.h>,
<waitpkgintrin.h>, <cldemoteintrin.h>, <enqcmdintrin.h>,
<serializeintrin.h>, <tsxldtrkintrin.h>, <adxintrin.h>,
<clwbintrin.h>, <clflushoptintrin.h>, <wbnoinvdintrin.h> and
<pkuintrin.h>.
(_wbinvd): Moved to config/i386/x86gprintrin.h.
(_rdrand16_step): Likewise.
(_rdrand32_step): Likewise.
(_rdpid_u32): Likewise.
(_readfsbase_u32): Likewise.
(_readfsbase_u64): Likewise.
(_readgsbase_u32): Likewise.
(_readgsbase_u64): Likewise.
(_writefsbase_u32): Likewise.
(_writefsbase_u64): Likewise.
(_writegsbase_u32): Likewise.
(_writegsbase_u64): Likewise.
(_rdrand64_step): Likewise.
(_ptwrite64): Likewise.
(_ptwrite32): Likewise.
* config/i386/x86gprintrin.h: New file.
* config/i386/x86intrin.h: Include <x86gprintrin.h>. Don't
include <ia32intrin.h>, <lwpintrin.h>, <tbmintrin.h>,
<popcntintrin.h>, <mwaitxintrin.h> and <clzerointrin.h>.
2020-10-09 Tom de Vries <tdevries@suse.de>
PR target/97348
* config/nvptx/nvptx.h (ASM_SPEC): Also pass -m to nvptx-as if
default is used.
* config/nvptx/nvptx.opt (misa): Init with PTX_ISA_SM35.
2020-10-09 Richard Biener <rguenther@suse.de>
* doc/sourcebuild.texi (vect_masked_load): Document.
2020-10-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/97334
* tree-vect-slp.c (vect_build_slp_tree_1): Do not fatally
fail lanes other than zero when BB vectorizing.
2020-10-09 Jan Hubicka <jh@suse.cz>
PR ipa/97292
PR ipa/97335
* ipa-modref-tree.h (copy_from): Drop summary in a
clone.
2020-10-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/97347
* tree-vect-slp.c (vect_create_constant_vectors): Use
edge insertion when inserting on the fallthru edge,
appropriately insert at the start of BBs when inserting
after PHIs.
2020-10-09 Andrew MacLeod <amacleod@redhat.com>
PR tree-optimization/97317
* range-op.cc (operator_cast::op1_range): Handle casts where the precision
of the RHS is only 1 greater than the precision of the LHS.
2020-10-09 Richard Biener <rguenther@suse.de>
* cgraphunit.c (expand_all_functions): Free tp_first_run_order.
* ipa-modref.c (pass_ipa_modref::execute): Free order.
* tree-ssa-loop-niter.c (estimate_numbers_of_iterations): Free
loop body.
* tree-vect-data-refs.c (vect_find_stmt_data_reference): Free
data references upon failure.
* tree-vect-loop.c (update_epilogue_loop_vinfo): Free BBs
array of the original loop.
* tree-vect-slp.c (vect_slp_bbs): Use an auto_vec for
dataref_groups to release its memory.
2020-10-09 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94801
PR target/97312
* vr-values.c (vr_values::extract_range_basic) <CASE_CFN_CLZ,
CASE_CFN_CTZ>: When stmt is not an internal-fn call or
C?Z_DEFINED_VALUE_AT_ZERO is not 2, assume argument is not zero
and thus use [0, prec-1] range unless it can be further improved.
For CTZ, don't update maxi from upper bound if it was previously prec.
* gimple-range.cc (gimple_ranger::range_of_builtin_call) <CASE_CFN_CLZ,
CASE_CFN_CTZ>: Likewise.
2020-10-09 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97325
* match.pd (FFS(nonzero) -> CTZ(nonzero) + 1): Cast argument to
corresponding unsigned type.
2020-10-09 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_create_constant_vectors): Properly insert
after PHIs.
2020-10-08 Alexandre Oliva <oliva@adacore.com>
* builtins.c (mathfn_built_in_type): New.
* builtins.h (mathfn_built_in_type): Declare.
* tree-ssa-math-opts.c (execute_cse_sincos_1): Use it to
obtain the type expected by the intrinsic.
2020-10-08 Will Schmidt <will_schmidt@vnet.ibm.com>
* config/rs6000/rs6000-builtin.def (BU_P10_MISC_2): Rename
to BU_P10_POWERPC64_MISC_2.
CFUGED, CNTLZDM, CNTTZDM, PDEPD, PEXTD): Call renamed macro.
2020-10-08 Jan Hubicka <jh@suse.cz>
* tree-nrv.c (dest_safe_for_nrv_p): Disable tbaa in
call_may_clobber_ref_p and ref_maybe_used_by_stmt_p.
* tree-tailcall.c (find_tail_calls): Likewise.
* tree-ssa-alias.c (call_may_clobber_ref_p): Add tbaa_p parameter.
* tree-ssa-alias.h (call_may_clobber_ref_p): Update prototype.
* tree-ssa-sccvn.c (vn_reference_lookup_3): Pass data->tbaa_p
to call_may_clobber_ref_p_1.
2020-10-08 Mark Wielaard <mark@klomp.org>
* dwarf2out.c (dwarf2out_finish): Emit .file 0 entry when
generating DWARF5 .debug_line table through gas.
2020-10-08 John Henning <john.henning@oracle.com>
PR other/97309
* doc/invoke.texi: Improve documentation of
-fallow-store-data-races.
2020-10-08 Christophe Lyon <christophe.lyon@linaro.org>
PR target/96914
* config/arm/arm_mve.h (__arm_vcvtnq_u32_f32): New.
2020-10-08 Martin Liska <mliska@suse.cz>
Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (_bb_vec_info::const_iterator): Remove.
(_bb_vec_info::const_reverse_iterator): Likewise.
(_bb_vec_info::region_stmts): Likewise.
(_bb_vec_info::reverse_region_stmts): Likewise.
(_bb_vec_info::_bb_vec_info): Adjust.
(_bb_vec_info::bb): Remove.
(_bb_vec_info::region_begin): Remove.
(_bb_vec_info::region_end): Remove.
(_bb_vec_info::bbs): New vector of BBs.
(vect_slp_function): Declare.
* tree-vect-patterns.c (vect_determine_precisions): Use
regular stmt iteration.
(vect_pattern_recog): Likewise.
* tree-vect-slp.c: Include cfganal.h, tree-eh.h and tree-cfg.h.
(vect_build_slp_tree_1): Properly refuse to vectorize
volatile and throwing stmts.
(vect_build_slp_tree_2): Pass group-size down to
get_vectype_for_scalar_type.
(_bb_vec_info::_bb_vec_info): Use regular stmt iteration,
adjust for changed region specification.
(_bb_vec_info::~_bb_vec_info): Likewise.
(vect_slp_check_for_constructors): Likewise.
(vect_slp_region): Likewise.
(vect_slp_bbs): New worker operating on a vector of BBs.
(vect_slp_bb): Wrap it.
(vect_slp_function): New function splitting the function
into multi-BB regions.
(vect_create_constant_vectors): Handle the case of inserting
after a throwing def.
(vect_schedule_slp_instance): Adjust.
* tree-vectorizer.c (vec_info::remove_stmt): Simplify again.
(vec_info::insert_seq_on_entry): Adjust.
(pass_slp_vectorize::execute): Also init PHIs. Call
vect_slp_function.
2020-10-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/97330
* tree-ssa-sink.c (statement_sink_location): Avoid skipping
PHIs when they dominate the insert location.
2020-10-08 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (get_access): Fix handling of offsets.
* tree-ssa-alias.c (modref_may_conflict): Watch for overflows.
2020-10-08 Martin Liska <mliska@suse.cz>
* dbgcnt.def (DEBUG_COUNTER): Add ipa_mod_ref debug counter.
* tree-ssa-alias.c (modref_may_conflict): Handle the counter.
2020-10-08 Richard Biener <rguenther@suse.de>
* tree-vectorizer.c (try_vectorize_loop_1): Do not dump
"basic block vectorized".
(pass_slp_vectorize::execute): Likewise.
* tree-vect-slp.c (vect_analyze_slp_instance): Avoid
re-analyzing split single stmts.
2020-10-08 Christophe Lyon <christophe.lyon@linaro.org>
PR target/96914
* config/arm/arm_mve.h (vqrdmlashq_n_u8, vqrdmlashq_n_u16)
(vqrdmlashq_n_u32, vqrdmlahq_n_u8, vqrdmlahq_n_u16)
(vqrdmlahq_n_u32, vqdmlahq_n_u8, vqdmlahq_n_u16, vqdmlahq_n_u32)
(vmlaldavaxq_p_u16, vmlaldavaxq_p_u32): Remove.
* config/arm/arm_mve_builtins.def (vqrdmlashq_n_u, vqrdmlahq_n_u)
(vqdmlahq_n_u, vmlaldavaxq_p_u): Remove.
* config/arm/unspecs.md (VQDMLAHQ_N_U, VQRDMLAHQ_N_U)
(VQRDMLASHQ_N_U)
(VMLALDAVAXQ_P_U): Remove unspecs.
* config/arm/iterators.md (VQDMLAHQ_N_U, VQRDMLAHQ_N_U)
(VQRDMLASHQ_N_U, VMLALDAVAXQ_P_U): Remove attributes.
(VQDMLAHQ_N, VQRDMLAHQ_N, VQRDMLASHQ_N, VMLALDAVAXQ_P): Remove
unsigned variants from iterators.
* config/arm/mve.md (mve_vqdmlahq_n_<supf><mode>)
(mve_vqrdmlahq_n_<supf><mode>)
(mve_vqrdmlashq_n_<supf><mode>, mve_vmlaldavaxq_p_<supf><mode>):
Update comment.
2020-10-08 Christophe Lyon <christophe.lyon@linaro.org>
PR target/96914
* config/arm/arm_mve.h (vqdmlashq, vqdmlashq_m): Define.
* config/arm/arm_mve_builtins.def (vqdmlashq_n_s)
(vqdmlashq_m_n_s,): New.
* config/arm/unspecs.md (VQDMLASHQ_N_S, VQDMLASHQ_M_N_S): New
unspecs.
* config/arm/iterators.md (VQDMLASHQ_N_S, VQDMLASHQ_M_N_S): New
attributes.
(VQDMLASHQ_N): New iterator.
* config/arm/mve.md (mve_vqdmlashq_n_, mve_vqdmlashq_m_n_s): New
patterns.
2020-10-08 Jakub Jelinek <jakub@redhat.com>
PR target/97322
* config/arm/arm.c (arm_expand_divmod_libfunc): Pass mode instead of
GET_MODE (op0) or GET_MODE (op1) to emit_library_call_value.
2020-10-08 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97325
* gimple-range.cc (gimple_ranger::range_of_builtin_call): Handle
negative numbers in __builtin_ffs and __builtin_popcount.
2020-10-08 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97315
* range-op.cc (value_range_with_overflow): Change any
non-overflow calculation in which both bounds are
overflow/underflow to be undefined.
2020-10-08 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/97315
* gimple-ssa-evrp.c (hybrid_folder::choose_value): Removes the
trap and instead annotates the listing.
2020-10-08 Jakub Jelinek <jakub@redhat.com>
PR sanitizer/97294
* tree-cfg.c (move_block_to_fn): Call notice_special_calls on
call stmts being moved into dest_cfun.
* omp-low.c (lower_rec_input_clauses): Set cfun->calls_alloca when
adding __builtin_alloca_with_align call without gimplification.
2020-10-07 Aldy Hernandez <aldyh@redhat.com>
* common.opt (-fevrp-mode): Rename and move...
* params.opt (--param=evrp-mode): ...here.
* gimple-range.h (DEBUG_RANGE_CACHE): Use param_evrp_mode instead
of flag_evrp_mode.
* gimple-ssa-evrp.c (rvrp_folder): Same.
(hybrid_folder): Same.
(execute_early_vrp): Same.
2020-10-07 Richard Biener <rguenther@suse.de>
PR tree-optimization/97307
* tree-ssa-sink.c (statement_sink_location): Change heuristic
for not skipping stores to look for virtual definitions
rather than uses.
2020-10-07 Andrew MacLeod <amacleod@redhat.com>
* value-range.h (irange_allocator::allocate): Allocate in two hunks
instead of using the variably-sized trailing array approach.
2020-10-07 David Malcolm <dmalcolm@redhat.com>
* doc/invoke.texi (-fdiagnostics-plain-output): Add
-fdiagnostics-path-format=separate-events to list of
options injected by -fdiagnostics-plain-output.
* opts-common.c (decode_cmdline_options_to_array): Likewise.
2020-10-07 Martin Jambor <mjambor@suse.cz>
PR ipa/96394
* ipa-prop.c (update_indirect_edges_after_inlining): Do not add
resolved speculation edges to vector of new direct edges even in
presence of multiple speculative direct edges for a single call.
2020-10-07 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn.md (unspec): Add UNSPEC_ADDPTR.
(addptrdi3): Add SGPR alternative.
2020-10-07 Mark Wielaard <mark@klomp.org>
* dwarf2out.c (add_filepath_AT_string): New function.
(asm_outputs_debug_line_str): Likewise.
(add_filename_attribute): Likewise.
(add_comp_dir_attribute): Call add_filepath_AT_string.
(gen_compile_unit_die): Call add_filename_attribute for name.
(init_sections_and_labels): Init debug_line_str_section when
asm_outputs_debug_line_str return true.
(dwarf2out_early_finish): Remove DW_AT_name and DW_AT_comp_dir
hack and call add_filename_attribute for the remap_debug_filename.
2020-10-07 Jakub Jelinek <jakub@redhat.com>
* configure.ac (HAVE_AS_GDWARF_5_DEBUG_FLAG,
HAVE_AS_WORKING_DWARF_4_FLAG): New tests.
* gcc.c (ASM_DEBUG_DWARF_OPTION): Define.
(ASM_DEBUG_SPEC): Use ASM_DEBUG_DWARF_OPTION instead of
"--gdwarf2". Use %{cond:opt1;:opt2} style.
(ASM_DEBUG_OPTION_DWARF_OPT): Define.
(ASM_DEBUG_OPTION_SPEC): Define.
(asm_debug_option): New variable.
(asm_options): Add "%(asm_debug_option)".
(static_specs): Add asm_debug_option entry.
(static_spec_functions): Add dwarf-version-gt.
(debug_level_greater_than_spec_func): New function.
* config/darwin.h (ASM_DEBUG_OPTION_SPEC): Define.
* config/darwin9.h (ASM_DEBUG_OPTION_SPEC): Redefine.
* config.in: Regenerated.
* configure: Regenerated.
2020-10-07 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/97305
* optc-save-gen.awk: Don't declare mask variable if explicit_mask
array is not present.
2020-10-07 Jakub Jelinek <jakub@redhat.com>
* omp-expand.c (expand_omp_simd): Don't emit MIN_EXPR and PLUS_EXPR
at the end of entry_bb and innermost init_bb, instead force arguments
for MIN_EXPR into temporaries in both cases and jump to a new bb that
performs MIN_EXPR and PLUS_EXPR.
2020-10-07 Tom de Vries <tdevries@suse.de>
* tree-ssa-loop-ch.c (ch_base::copy_headers): Add missing NULL test
for dump_file.
2020-10-06 Andrew MacLeod <amacleod@redhat.com>
* flag-types.h (enum evrp_mode): New enumerated type EVRP_MODE_*.
* common.opt (fevrp-mode): New undocumented flag.
* gimple-ssa-evrp.c: Include gimple-range.h
(class rvrp_folder): EVRP folding using ranger exclusively.
(rvrp_folder::rvrp_folder): New.
(rvrp_folder::~rvrp_folder): New.
(rvrp_folder::value_of_expr): New. Use rangers value_of_expr.
(rvrp_folder::value_on_edge): New. Use rangers value_on_edge.
(rvrp_folder::value_of_Stmt): New. Use rangers value_of_stmt.
(rvrp_folder::fold_stmt): New. Call the simplifier.
(class hybrid_folder): EVRP folding using both engines.
(hybrid_folder::hybrid_folder): New.
(hybrid_folder::~hybrid_folder): New.
(hybrid_folder::fold_stmt): New. Simplify with one engne, then the
other.
(hybrid_folder::value_of_expr): New. Use both value routines.
(hybrid_folder::value_on_edge): New. Use both value routines.
(hybrid_folder::value_of_stmt): New. Use both value routines.
(hybrid_folder::choose_value): New. Choose between range_analzyer and
rangers values.
(execute_early_vrp): Choose a folder based on flag_evrp_mode.
* vr-values.c (simplify_using_ranges::fold_cond): Try range_of_stmt
first to see if it returns a value.
(simplify_using_ranges::simplify_switch_using_ranges): Return true if
any changes were made to the switch.
2020-10-06 Andrew MacLeod <amacleod@redhat.com>
* Makefile.in (OBJS): Add gimple-range*.o.
* gimple-range.h: New file.
* gimple-range.cc: New file.
* gimple-range-cache.h: New file.
* gimple-range-cache.cc: New file.
* gimple-range-edge.h: New file.
* gimple-range-edge.cc: New file.
* gimple-range-gori.h: New file.
* gimple-range-gori.cc: New file.
2020-10-06 Dennis Zhang <dennis.zhang@arm.com>
* config/arm/arm.c (arm_preferred_simd_mode): Enable MVE SIMD modes.
2020-10-06 Tom de Vries <tdevries@suse.de>
PR middle-end/90861
* gimplify.c (gimplify_bind_expr): Handle lookup in
oacc_declare_returns using key with decl-expr.
2020-10-06 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/arm/iterators.md (MVE_types): Move mode iterator from mve.md to
iterators.md.
(MVE_VLD_ST): Likewise.
(MVE_0): Likewise.
(MVE_1): Likewise.
(MVE_3): Likewise.
(MVE_2): Likewise.
(MVE_5): Likewise.
(MVE_6): Likewise.
(MVE_CNVT): Move mode attribute iterator from mve.md to iterators.md.
(MVE_LANES): Likewise.
(MVE_constraint): Likewise.
(MVE_constraint1): Likewise.
(MVE_constraint2): Likewise.
(MVE_constraint3): Likewise.
(MVE_pred): Likewise.
(MVE_pred1): Likewise.
(MVE_pred2): Likewise.
(MVE_pred3): Likewise.
(MVE_B_ELEM): Likewise.
(MVE_H_ELEM): Likewise.
(V_sz_elem1): Likewise.
(V_extr_elem): Likewise.
(earlyclobber_32): Likewise.
(supf): Move int attribute from mve.md to iterators.md.
(mode1): Likewise.
(VCVTQ_TO_F): Move int iterator from mve.md to iterators.md.
(VMVNQ_N): Likewise.
(VREV64Q): Likewise.
(VCVTQ_FROM_F): Likewise.
(VREV16Q): Likewise.
(VCVTAQ): Likewise.
(VMVNQ): Likewise.
(VDUPQ_N): Likewise.
(VCLZQ): Likewise.
(VADDVQ): Likewise.
(VREV32Q): Likewise.
(VMOVLBQ): Likewise.
(VMOVLTQ): Likewise.
(VCVTPQ): Likewise.
(VCVTNQ): Likewise.
(VCVTMQ): Likewise.
(VADDLVQ): Likewise.
(VCTPQ): Likewise.
(VCTPQ_M): Likewise.
(VCVTQ_N_TO_F): Likewise.
(VCREATEQ): Likewise.
(VSHRQ_N): Likewise.
(VCVTQ_N_FROM_F): Likewise.
(VADDLVQ_P): Likewise.
(VCMPNEQ): Likewise.
(VSHLQ): Likewise.
(VABDQ): Likewise.
(VADDQ_N): Likewise.
(VADDVAQ): Likewise.
(VADDVQ_P): Likewise.
(VANDQ): Likewise.
(VBICQ): Likewise.
(VBRSRQ_N): Likewise.
(VCADDQ_ROT270): Likewise.
(VCADDQ_ROT90): Likewise.
(VCMPEQQ): Likewise.
(VCMPEQQ_N): Likewise.
(VCMPNEQ_N): Likewise.
(VEORQ): Likewise.
(VHADDQ): Likewise.
(VHADDQ_N): Likewise.
(VHSUBQ): Likewise.
(VHSUBQ_N): Likewise.
(VMAXQ): Likewise.
(VMAXVQ): Likewise.
(VMINQ): Likewise.
(VMINVQ): Likewise.
(VMLADAVQ): Likewise.
(VMULHQ): Likewise.
(VMULLBQ_INT): Likewise.
(VMULLTQ_INT): Likewise.
(VMULQ): Likewise.
(VMULQ_N): Likewise.
(VORNQ): Likewise.
(VORRQ): Likewise.
(VQADDQ): Likewise.
(VQADDQ_N): Likewise.
(VQRSHLQ): Likewise.
(VQRSHLQ_N): Likewise.
(VQSHLQ): Likewise.
(VQSHLQ_N): Likewise.
(VQSHLQ_R): Likewise.
(VQSUBQ): Likewise.
(VQSUBQ_N): Likewise.
(VRHADDQ): Likewise.
(VRMULHQ): Likewise.
(VRSHLQ): Likewise.
(VRSHLQ_N): Likewise.
(VRSHRQ_N): Likewise.
(VSHLQ_N): Likewise.
(VSHLQ_R): Likewise.
(VSUBQ): Likewise.
(VSUBQ_N): Likewise.
(VADDLVAQ): Likewise.
(VBICQ_N): Likewise.
(VMLALDAVQ): Likewise.
(VMLALDAVXQ): Likewise.
(VMOVNBQ): Likewise.
(VMOVNTQ): Likewise.
(VORRQ_N): Likewise.
(VQMOVNBQ): Likewise.
(VQMOVNTQ): Likewise.
(VSHLLBQ_N): Likewise.
(VSHLLTQ_N): Likewise.
(VRMLALDAVHQ): Likewise.
(VBICQ_M_N): Likewise.
(VCVTAQ_M): Likewise.
(VCVTQ_M_TO_F): Likewise.
(VQRSHRNBQ_N): Likewise.
(VABAVQ): Likewise.
(VSHLCQ): Likewise.
(VRMLALDAVHAQ): Likewise.
(VADDVAQ_P): Likewise.
(VCLZQ_M): Likewise.
(VCMPEQQ_M_N): Likewise.
(VCMPEQQ_M): Likewise.
(VCMPNEQ_M_N): Likewise.
(VCMPNEQ_M): Likewise.
(VDUPQ_M_N): Likewise.
(VMAXVQ_P): Likewise.
(VMINVQ_P): Likewise.
(VMLADAVAQ): Likewise.
(VMLADAVQ_P): Likewise.
(VMLAQ_N): Likewise.
(VMLASQ_N): Likewise.
(VMVNQ_M): Likewise.
(VPSELQ): Likewise.
(VQDMLAHQ_N): Likewise.
(VQRDMLAHQ_N): Likewise.
(VQRDMLASHQ_N): Likewise.
(VQRSHLQ_M_N): Likewise.
(VQSHLQ_M_R): Likewise.
(VREV64Q_M): Likewise.
(VRSHLQ_M_N): Likewise.
(VSHLQ_M_R): Likewise.
(VSLIQ_N): Likewise.
(VSRIQ_N): Likewise.
(VMLALDAVQ_P): Likewise.
(VQMOVNBQ_M): Likewise.
(VMOVLTQ_M): Likewise.
(VMOVNBQ_M): Likewise.
(VRSHRNTQ_N): Likewise.
(VORRQ_M_N): Likewise.
(VREV32Q_M): Likewise.
(VREV16Q_M): Likewise.
(VQRSHRNTQ_N): Likewise.
(VMOVNTQ_M): Likewise.
(VMOVLBQ_M): Likewise.
(VMLALDAVAQ): Likewise.
(VQSHRNBQ_N): Likewise.
(VSHRNBQ_N): Likewise.
(VRSHRNBQ_N): Likewise.
(VMLALDAVXQ_P): Likewise.
(VQMOVNTQ_M): Likewise.
(VMVNQ_M_N): Likewise.
(VQSHRNTQ_N): Likewise.
(VMLALDAVAXQ): Likewise.
(VSHRNTQ_N): Likewise.
(VCVTMQ_M): Likewise.
(VCVTNQ_M): Likewise.
(VCVTPQ_M): Likewise.
(VCVTQ_M_N_FROM_F): Likewise.
(VCVTQ_M_FROM_F): Likewise.
(VRMLALDAVHQ_P): Likewise.
(VADDLVAQ_P): Likewise.
(VABAVQ_P): Likewise.
(VSHLQ_M): Likewise.
(VSRIQ_M_N): Likewise.
(VSUBQ_M): Likewise.
(VCVTQ_M_N_TO_F): Likewise.
(VHSUBQ_M): Likewise.
(VSLIQ_M_N): Likewise.
(VRSHLQ_M): Likewise.
(VMINQ_M): Likewise.
(VMULLBQ_INT_M): Likewise.
(VMULHQ_M): Likewise.
(VMULQ_M): Likewise.
(VHSUBQ_M_N): Likewise.
(VHADDQ_M_N): Likewise.
(VORRQ_M): Likewise.
(VRMULHQ_M): Likewise.
(VQADDQ_M): Likewise.
(VRSHRQ_M_N): Likewise.
(VQSUBQ_M_N): Likewise.
(VADDQ_M): Likewise.
(VORNQ_M): Likewise.
(VRHADDQ_M): Likewise.
(VQSHLQ_M): Likewise.
(VANDQ_M): Likewise.
(VBICQ_M): Likewise.
(VSHLQ_M_N): Likewise.
(VCADDQ_ROT270_M): Likewise.
(VQRSHLQ_M): Likewise.
(VQADDQ_M_N): Likewise.
(VADDQ_M_N): Likewise.
(VMAXQ_M): Likewise.
(VQSUBQ_M): Likewise.
(VMLASQ_M_N): Likewise.
(VMLADAVAQ_P): Likewise.
(VBRSRQ_M_N): Likewise.
(VMULQ_M_N): Likewise.
(VCADDQ_ROT90_M): Likewise.
(VMULLTQ_INT_M): Likewise.
(VEORQ_M): Likewise.
(VSHRQ_M_N): Likewise.
(VSUBQ_M_N): Likewise.
(VHADDQ_M): Likewise.
(VABDQ_M): Likewise.
(VMLAQ_M_N): Likewise.
(VQSHLQ_M_N): Likewise.
(VMLALDAVAQ_P): Likewise.
(VMLALDAVAXQ_P): Likewise.
(VQRSHRNBQ_M_N): Likewise.
(VQRSHRNTQ_M_N): Likewise.
(VQSHRNBQ_M_N): Likewise.
(VQSHRNTQ_M_N): Likewise.
(VRSHRNBQ_M_N): Likewise.
(VRSHRNTQ_M_N): Likewise.
(VSHLLBQ_M_N): Likewise.
(VSHLLTQ_M_N): Likewise.
(VSHRNBQ_M_N): Likewise.
(VSHRNTQ_M_N): Likewise.
(VSTRWSBQ): Likewise.
(VSTRBSOQ): Likewise.
(VSTRBQ): Likewise.
(VLDRBGOQ): Likewise.
(VLDRBQ): Likewise.
(VLDRWGBQ): Likewise.
(VLD1Q): Likewise.
(VLDRHGOQ): Likewise.
(VLDRHGSOQ): Likewise.
(VLDRHQ): Likewise.
(VLDRWQ): Likewise.
(VLDRDGBQ): Likewise.
(VLDRDGOQ): Likewise.
(VLDRDGSOQ): Likewise.
(VLDRWGOQ): Likewise.
(VLDRWGSOQ): Likewise.
(VST1Q): Likewise.
(VSTRHSOQ): Likewise.
(VSTRHSSOQ): Likewise.
(VSTRHQ): Likewise.
(VSTRWQ): Likewise.
(VSTRDSBQ): Likewise.
(VSTRDSOQ): Likewise.
(VSTRDSSOQ): Likewise.
(VSTRWSOQ): Likewise.
(VSTRWSSOQ): Likewise.
(VSTRWSBWBQ): Likewise.
(VLDRWGBWBQ): Likewise.
(VSTRDSBWBQ): Likewise.
(VLDRDGBWBQ): Likewise.
(VADCIQ): Likewise.
(VADCIQ_M): Likewise.
(VSBCQ): Likewise.
(VSBCQ_M): Likewise.
(VSBCIQ): Likewise.
(VSBCIQ_M): Likewise.
(VADCQ): Likewise.
(VADCQ_M): Likewise.
(UQRSHLLQ): Likewise.
(SQRSHRLQ): Likewise.
(VSHLCQ_M): Likewise.
* config/arm/mve.md (MVE_types): Move mode iterator to iterators.md from mve.md.
(MVE_VLD_ST): Likewise.
(MVE_0): Likewise.
(MVE_1): Likewise.
(MVE_3): Likewise.
(MVE_2): Likewise.
(MVE_5): Likewise.
(MVE_6): Likewise.
(MVE_CNVT): Move mode attribute iterator to iterators.md from mve.md.
(MVE_LANES): Likewise.
(MVE_constraint): Likewise.
(MVE_constraint1): Likewise.
(MVE_constraint2): Likewise.
(MVE_constraint3): Likewise.
(MVE_pred): Likewise.
(MVE_pred1): Likewise.
(MVE_pred2): Likewise.
(MVE_pred3): Likewise.
(MVE_B_ELEM): Likewise.
(MVE_H_ELEM): Likewise.
(V_sz_elem1): Likewise.
(V_extr_elem): Likewise.
(earlyclobber_32): Likewise.
(supf): Move int attribute to iterators.md from mve.md.
(mode1): Likewise.
(VCVTQ_TO_F): Move int iterator to iterators.md from mve.md.
(VMVNQ_N): Likewise.
(VREV64Q): Likewise.
(VCVTQ_FROM_F): Likewise.
(VREV16Q): Likewise.
(VCVTAQ): Likewise.
(VMVNQ): Likewise.
(VDUPQ_N): Likewise.
(VCLZQ): Likewise.
(VADDVQ): Likewise.
(VREV32Q): Likewise.
(VMOVLBQ): Likewise.
(VMOVLTQ): Likewise.
(VCVTPQ): Likewise.
(VCVTNQ): Likewise.
(VCVTMQ): Likewise.
(VADDLVQ): Likewise.
(VCTPQ): Likewise.
(VCTPQ_M): Likewise.
(VCVTQ_N_TO_F): Likewise.
(VCREATEQ): Likewise.
(VSHRQ_N): Likewise.
(VCVTQ_N_FROM_F): Likewise.
(VADDLVQ_P): Likewise.
(VCMPNEQ): Likewise.
(VSHLQ): Likewise.
(VABDQ): Likewise.
(VADDQ_N): Likewise.
(VADDVAQ): Likewise.
(VADDVQ_P): Likewise.
(VANDQ): Likewise.
(VBICQ): Likewise.
(VBRSRQ_N): Likewise.
(VCADDQ_ROT270): Likewise.
(VCADDQ_ROT90): Likewise.
(VCMPEQQ): Likewise.
(VCMPEQQ_N): Likewise.
(VCMPNEQ_N): Likewise.
(VEORQ): Likewise.
(VHADDQ): Likewise.
(VHADDQ_N): Likewise.
(VHSUBQ): Likewise.
(VHSUBQ_N): Likewise.
(VMAXQ): Likewise.
(VMAXVQ): Likewise.
(VMINQ): Likewise.
(VMINVQ): Likewise.
(VMLADAVQ): Likewise.
(VMULHQ): Likewise.
(VMULLBQ_INT): Likewise.
(VMULLTQ_INT): Likewise.
(VMULQ): Likewise.
(VMULQ_N): Likewise.
(VORNQ): Likewise.
(VORRQ): Likewise.
(VQADDQ): Likewise.
(VQADDQ_N): Likewise.
(VQRSHLQ): Likewise.
(VQRSHLQ_N): Likewise.
(VQSHLQ): Likewise.
(VQSHLQ_N): Likewise.
(VQSHLQ_R): Likewise.
(VQSUBQ): Likewise.
(VQSUBQ_N): Likewise.
(VRHADDQ): Likewise.
(VRMULHQ): Likewise.
(VRSHLQ): Likewise.
(VRSHLQ_N): Likewise.
(VRSHRQ_N): Likewise.
(VSHLQ_N): Likewise.
(VSHLQ_R): Likewise.
(VSUBQ): Likewise.
(VSUBQ_N): Likewise.
(VADDLVAQ): Likewise.
(VBICQ_N): Likewise.
(VMLALDAVQ): Likewise.
(VMLALDAVXQ): Likewise.
(VMOVNBQ): Likewise.
(VMOVNTQ): Likewise.
(VORRQ_N): Likewise.
(VQMOVNBQ): Likewise.
(VQMOVNTQ): Likewise.
(VSHLLBQ_N): Likewise.
(VSHLLTQ_N): Likewise.
(VRMLALDAVHQ): Likewise.
(VBICQ_M_N): Likewise.
(VCVTAQ_M): Likewise.
(VCVTQ_M_TO_F): Likewise.
(VQRSHRNBQ_N): Likewise.
(VABAVQ): Likewise.
(VSHLCQ): Likewise.
(VRMLALDAVHAQ): Likewise.
(VADDVAQ_P): Likewise.
(VCLZQ_M): Likewise.
(VCMPEQQ_M_N): Likewise.
(VCMPEQQ_M): Likewise.
(VCMPNEQ_M_N): Likewise.
(VCMPNEQ_M): Likewise.
(VDUPQ_M_N): Likewise.
(VMAXVQ_P): Likewise.
(VMINVQ_P): Likewise.
(VMLADAVAQ): Likewise.
(VMLADAVQ_P): Likewise.
(VMLAQ_N): Likewise.
(VMLASQ_N): Likewise.
(VMVNQ_M): Likewise.
(VPSELQ): Likewise.
(VQDMLAHQ_N): Likewise.
(VQRDMLAHQ_N): Likewise.
(VQRDMLASHQ_N): Likewise.
(VQRSHLQ_M_N): Likewise.
(VQSHLQ_M_R): Likewise.
(VREV64Q_M): Likewise.
(VRSHLQ_M_N): Likewise.
(VSHLQ_M_R): Likewise.
(VSLIQ_N): Likewise.
(VSRIQ_N): Likewise.
(VMLALDAVQ_P): Likewise.
(VQMOVNBQ_M): Likewise.
(VMOVLTQ_M): Likewise.
(VMOVNBQ_M): Likewise.
(VRSHRNTQ_N): Likewise.
(VORRQ_M_N): Likewise.
(VREV32Q_M): Likewise.
(VREV16Q_M): Likewise.
(VQRSHRNTQ_N): Likewise.
(VMOVNTQ_M): Likewise.
(VMOVLBQ_M): Likewise.
(VMLALDAVAQ): Likewise.
(VQSHRNBQ_N): Likewise.
(VSHRNBQ_N): Likewise.
(VRSHRNBQ_N): Likewise.
(VMLALDAVXQ_P): Likewise.
(VQMOVNTQ_M): Likewise.
(VMVNQ_M_N): Likewise.
(VQSHRNTQ_N): Likewise.
(VMLALDAVAXQ): Likewise.
(VSHRNTQ_N): Likewise.
(VCVTMQ_M): Likewise.
(VCVTNQ_M): Likewise.
(VCVTPQ_M): Likewise.
(VCVTQ_M_N_FROM_F): Likewise.
(VCVTQ_M_FROM_F): Likewise.
(VRMLALDAVHQ_P): Likewise.
(VADDLVAQ_P): Likewise.
(VABAVQ_P): Likewise.
(VSHLQ_M): Likewise.
(VSRIQ_M_N): Likewise.
(VSUBQ_M): Likewise.
(VCVTQ_M_N_TO_F): Likewise.
(VHSUBQ_M): Likewise.
(VSLIQ_M_N): Likewise.
(VRSHLQ_M): Likewise.
(VMINQ_M): Likewise.
(VMULLBQ_INT_M): Likewise.
(VMULHQ_M): Likewise.
(VMULQ_M): Likewise.
(VHSUBQ_M_N): Likewise.
(VHADDQ_M_N): Likewise.
(VORRQ_M): Likewise.
(VRMULHQ_M): Likewise.
(VQADDQ_M): Likewise.
(VRSHRQ_M_N): Likewise.
(VQSUBQ_M_N): Likewise.
(VADDQ_M): Likewise.
(VORNQ_M): Likewise.
(VRHADDQ_M): Likewise.
(VQSHLQ_M): Likewise.
(VANDQ_M): Likewise.
(VBICQ_M): Likewise.
(VSHLQ_M_N): Likewise.
(VCADDQ_ROT270_M): Likewise.
(VQRSHLQ_M): Likewise.
(VQADDQ_M_N): Likewise.
(VADDQ_M_N): Likewise.
(VMAXQ_M): Likewise.
(VQSUBQ_M): Likewise.
(VMLASQ_M_N): Likewise.
(VMLADAVAQ_P): Likewise.
(VBRSRQ_M_N): Likewise.
(VMULQ_M_N): Likewise.
(VCADDQ_ROT90_M): Likewise.
(VMULLTQ_INT_M): Likewise.
(VEORQ_M): Likewise.
(VSHRQ_M_N): Likewise.
(VSUBQ_M_N): Likewise.
(VHADDQ_M): Likewise.
(VABDQ_M): Likewise.
(VMLAQ_M_N): Likewise.
(VQSHLQ_M_N): Likewise.
(VMLALDAVAQ_P): Likewise.
(VMLALDAVAXQ_P): Likewise.
(VQRSHRNBQ_M_N): Likewise.
(VQRSHRNTQ_M_N): Likewise.
(VQSHRNBQ_M_N): Likewise.
(VQSHRNTQ_M_N): Likewise.
(VRSHRNBQ_M_N): Likewise.
(VRSHRNTQ_M_N): Likewise.
(VSHLLBQ_M_N): Likewise.
(VSHLLTQ_M_N): Likewise.
(VSHRNBQ_M_N): Likewise.
(VSHRNTQ_M_N): Likewise.
(VSTRWSBQ): Likewise.
(VSTRBSOQ): Likewise.
(VSTRBQ): Likewise.
(VLDRBGOQ): Likewise.
(VLDRBQ): Likewise.
(VLDRWGBQ): Likewise.
(VLD1Q): Likewise.
(VLDRHGOQ): Likewise.
(VLDRHGSOQ): Likewise.
(VLDRHQ): Likewise.
(VLDRWQ): Likewise.
(VLDRDGBQ): Likewise.
(VLDRDGOQ): Likewise.
(VLDRDGSOQ): Likewise.
(VLDRWGOQ): Likewise.
(VLDRWGSOQ): Likewise.
(VST1Q): Likewise.
(VSTRHSOQ): Likewise.
(VSTRHSSOQ): Likewise.
(VSTRHQ): Likewise.
(VSTRWQ): Likewise.
(VSTRDSBQ): Likewise.
(VSTRDSOQ): Likewise.
(VSTRDSSOQ): Likewise.
(VSTRWSOQ): Likewise.
(VSTRWSSOQ): Likewise.
(VSTRWSBWBQ): Likewise.
(VLDRWGBWBQ): Likewise.
(VSTRDSBWBQ): Likewise.
(VLDRDGBWBQ): Likewise.
(VADCIQ): Likewise.
(VADCIQ_M): Likewise.
(VSBCQ): Likewise.
(VSBCQ_M): Likewise.
(VSBCIQ): Likewise.
(VSBCIQ_M): Likewise.
(VADCQ): Likewise.
(VADCQ_M): Likewise.
(UQRSHLLQ): Likewise.
(SQRSHRLQ): Likewise.
(VSHLCQ_M): Likewise.
(define_c_enum "unspec"): Move MVE enumerator to unspecs.md from mve.md.
* config/arm/unspecs.md (define_c_enum "unspec"): Move MVE enumerator from
mve.md to unspecs.md.
2020-10-06 Martin Liska <mliska@suse.cz>
* common.opt: Remove -fdbg-cnt-list from deferred options.
* dbgcnt.c (dbg_cnt_set_limit_by_index): Make a copy
to original_limits.
(dbg_cnt_list_all_counters): Print also current counter value
and print to stderr.
* opts-global.c (handle_common_deferred_options): Do not handle
-fdbg-cnt-list.
* opts.c (common_handle_option): Likewise.
* toplev.c (finalize): Handle it after compilation here.
2020-10-06 Martin Liska <mliska@suse.cz>
* dbgcnt.c (dbg_cnt): Report also upper limit.
2020-10-06 Tom de Vries <tdevries@suse.de>
* tracer.c (count_insns): Rename to ...
(analyze_bb): ... this.
(cache_can_duplicate_bb_p, cached_can_duplicate_bb_p): New function.
(ignore_bb_p): Use cached_can_duplicate_bb_p.
(tail_duplicate): Call cache_can_duplicate_bb_p.
2020-10-06 Tom de Vries <tdevries@suse.de>
* tracer.c (can_duplicate_insn_p, can_duplicate_bb_no_insn_iter_p)
(can_duplicate_bb_p): New function, factored out of ...
(ignore_bb_p): ... here.
2020-10-06 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/97282
* tree-ssa-math-opts.c (divmod_candidate_p): Don't return false for
constant op2 if it is not a power of two and the type has precision
larger than HOST_BITS_PER_WIDE_INT or BITS_PER_WORD.
* internal-fn.c (contains_call_div_mod): New function.
(expand_DIVMOD): If last argument is a constant, try to expand it as
TRUNC_DIV_EXPR followed by TRUNC_MOD_EXPR, but if the sequence
contains any calls or {,U}{DIV,MOD} rtxes, throw it away and use
divmod optab or divmod libfunc.
2020-10-06 Aldy Hernandez <aldyh@redhat.com>
* value-range.h (irange_allocator::allocate): Increase
newir storage by one.
2020-10-06 Jakub Jelinek <jakub@redhat.com>
PR middle-end/97289
* omp-offload.c (omp_discover_declare_target_tgt_fn_r): Only follow
node->alias_target if it is a FUNCTION_DECL.
2020-10-06 Joe Ramsay <joe.ramsay@arm.com>
* config/arm/arm-cpus.in:
(ALL_FPU_INTERNAL): Remove vfp_base.
(VFPv2): Remove vfp_base.
(MVE): Remove vfp_base.
(vfp_base): Redefine as implied bit dependent on MVE or FP
(cortex-m55): Add flags to disable MVE, MVE FP, FP and DSP extensions.
* config/arm/arm.c (arm_configure_build_target): Add implied bits to ISA.
* config/arm/parsecpu.awk:
(gen_isa): Print implied bits and their dependencies to ISA header.
(gen_data): Add parsing for implied feature bits.
2020-10-06 Andreas Krebbel <krebbel@linux.ibm.com>
* doc/invoke.texi: Add z15/arch13 to the list of documented
-march/-mtune options.
2020-10-05 Aldy Hernandez <aldyh@redhat.com>
* value-range.cc (irange::legacy_intersect): Only handle
legacy ranges.
(irange::legacy_union): Same.
(irange::union_): When unioning legacy with non-legacy,
first convert to legacy and do everything in legacy mode.
(irange::intersect): Same, but for intersect.
* range-op.cc (range_tests): Adjust for above changes.
2020-10-05 Aldy Hernandez <aldyh@redhat.com>
* range-op.cc (operator_div::wi_fold): Return varying for
division by zero.
(class operator_rshift): Move class up.
(operator_abs::wi_fold): Return [-MIN,-MIN] for ABS([-MIN,-MIN]).
(operator_tests): Adjust tests.
2020-10-05 Tom de Vries <tdevries@suse.de>
* tracer.c (ignore_bb_p): Ignore GOMP_SIMT_XCHG_*.
2020-10-05 Alex Coplan <alex.coplan@arm.com>
* config/arm/arm-cpus.in (neoverse-v1): Add missing vendor and
part numbers.
2020-10-05 Tom de Vries <tdevries@suse.de>
* tracer.c (ignore_bb_p): Remove incorrect suggestion.
2020-10-05 Jakub Jelinek <jakub@redhat.com>
* opth-gen.awk: Don't emit explicit_mask array if n_target_explicit
is equal to n_target_explicit_mask.
* optc-save-gen.awk: Compute has_target_explicit_mask and if false,
don't emit code iterating over explicit_mask array elements. Stream
also explicit_mask_* target members.
2020-10-05 Jakub Jelinek <jakub@redhat.com>
* gimple-ssa-store-merging.c
(imm_store_chain_info::output_merged_store): Use ~0U instead of ~0 in
unsigned int array initializer.
2020-10-05 Tom de Vries <tdevries@suse.de>
PR fortran/95654
* tracer.c (ignore_bb_p): Ignore GOMP_SIMT_ENTER_ALLOC,
GOMP_SIMT_VOTE_ANY and GOMP_SIMT_EXIT.
2020-10-03 Jakub Jelinek <jakub@redhat.com>
* opth-gen.awk: For variables referenced in Mask and InverseMask,
don't use the explicit_mask bitmask array, but add separate
explicit_mask_* members with the same types as the variables.
* optc-save-gen.awk: Save, restore, compare and hash the separate
explicit_mask_* members.
2020-10-03 Jan Hubicka <hubicka@ucw.cz>
* ipa-modref-tree.c (test_insert_search_collapse): Update andling
of accesses.
(test_merge): Likewise.
* ipa-modref-tree.h (struct modref_access_node): Add offset, size,
max_size, parm_offset and parm_offset_known.
(modref_access_node::useful_p): Constify.
(modref_access_node::range_info_useful_p): New predicate.
(modref_access_node::operator==): New.
(struct modref_parm_map): New structure.
(modref_tree::merge): Update for racking parameters)
* ipa-modref.c (dump_access): Dump new fields.
(get_access): Fill in new fields.
(merge_call_side_effects): Update handling of parm map.
(write_modref_records): Stream new fields.
(read_modref_records): Stream new fields.
(compute_parm_map): Update for new parm map.
(ipa_merge_modref_summary_after_inlining): Update.
(modref_propagate_in_scc): Update.
* tree-ssa-alias.c (modref_may_conflict): Handle known ranges.
2020-10-03 H.J. Lu <hjl.tools@gmail.com>
PR other/97280
* doc/extend.texi: Replace roudnevenl with roundevenl
2020-10-02 David Edelsohn <dje.gcc@gmail.com>
Andrew MacLeod <amacleod@redhat.com>
* config/rs6000/rs6000.c: Include ssa.h. Reorder some headers.
* config/rs6000/rs6000-call.c: Same.
2020-10-02 Martin Jambor <mjambor@suse.cz>
* params.opt (ipa-cp-large-unit-insns): New parameter.
* ipa-cp.c (get_max_overall_size): Use the new parameter.
2020-10-02 Martin Jambor <mjambor@suse.cz>
* ipa-cp.c (estimate_local_effects): Add overeall_size to dumped
string.
(decide_about_value): Add dumping new overall_size.
2020-10-02 Martin Jambor <mjambor@suse.cz>
* ipa-fnsummary.h (ipa_freqcounting_predicate): New type.
(ipa_fn_summary): Change the type of loop_iterations and loop_strides
to vectors of ipa_freqcounting_predicate.
(ipa_fn_summary::ipa_fn_summary): Construct the new vectors.
(ipa_call_estimates): New fields loops_with_known_iterations and
loops_with_known_strides.
* ipa-cp.c (hint_time_bonus): Multiply param_ipa_cp_loop_hint_bonus
with the expected frequencies of loops with known iteration count or
stride.
* ipa-fnsummary.c (add_freqcounting_predicate): New function.
(ipa_fn_summary::~ipa_fn_summary): Release the new vectors instead of
just two predicates.
(remap_hint_predicate_after_duplication): Replace with function
remap_freqcounting_preds_after_dup.
(ipa_fn_summary_t::duplicate): Use it or duplicate new vectors.
(ipa_dump_fn_summary): Dump the new vectors.
(analyze_function_body): Compute the loop property vectors.
(ipa_call_context::estimate_size_and_time): Calculate also
loops_with_known_iterations and loops_with_known_strides. Adjusted
dumping accordinly.
(remap_hint_predicate): Replace with function
remap_freqcounting_predicate.
(ipa_merge_fn_summary_after_inlining): Use it.
(inline_read_section): Stream loopcounting vectors instead of two
simple predicates.
(ipa_fn_summary_write): Likewise.
* params.opt (ipa-max-loop-predicates): New parameter.
* doc/invoke.texi (ipa-max-loop-predicates): Document new param.
2020-10-02 Martin Jambor <mjambor@suse.cz>
* ipa-inline-analysis.c (do_estimate_edge_time): Adjusted to use
ipa_call_estimates.
(do_estimate_edge_size): Likewise.
(do_estimate_edge_hints): Likewise.
* ipa-fnsummary.h (struct ipa_call_estimates): New type.
(ipa_call_context::estimate_size_and_time): Adjusted declaration.
(estimate_ipcp_clone_size_and_time): Likewise.
* ipa-cp.c (hint_time_bonus): Changed the type of the second argument
to ipa_call_estimates.
(perform_estimation_of_a_value): Adjusted to use ipa_call_estimates.
(estimate_local_effects): Likewise.
* ipa-fnsummary.c (ipa_call_context::estimate_size_and_time): Adjusted
to return estimates in a single ipa_call_estimates parameter.
(estimate_ipcp_clone_size_and_time): Likewise.
2020-10-02 Martin Jambor <mjambor@suse.cz>
* ipa-fnsummary.h (ipa_cached_call_context): New forward declaration
and class.
(class ipa_call_context): Make friend ipa_cached_call_context. Moved
methods duplicate_from and release to it too.
* ipa-fnsummary.c (ipa_call_context::duplicate_from): Moved to class
ipa_cached_call_context.
(ipa_call_context::release): Likewise, removed the parameter.
* ipa-inline-analysis.c (node_context_cache_entry): Change the type of
ctx to ipa_cached_call_context.
(do_estimate_edge_time): Remove parameter from the call to
ipa_cached_call_context::release.
2020-10-02 Martin Jambor <mjambor@suse.cz>
* ipa-prop.h (ipa_auto_call_arg_values): New type.
(class ipa_call_arg_values): Likewise.
(ipa_get_indirect_edge_target): Replaced vector arguments with
ipa_call_arg_values in declaration. Added an overload for
ipa_auto_call_arg_values.
* ipa-fnsummary.h (ipa_call_context): Removed members m_known_vals,
m_known_contexts, m_known_aggs, duplicate_from, release and equal_to,
new members m_avals, store_to_cache and equivalent_to_p. Adjusted
construcotr arguments.
(estimate_ipcp_clone_size_and_time): Replaced vector arguments
with ipa_auto_call_arg_values in declaration.
(evaluate_properties_for_edge): Likewise.
* ipa-cp.c (ipa_get_indirect_edge_target): Adjusted to work on
ipa_call_arg_values rather than on separate vectors. Added an
overload for ipa_auto_call_arg_values.
(devirtualization_time_bonus): Adjusted to work on
ipa_auto_call_arg_values rather than on separate vectors.
(gather_context_independent_values): Adjusted to work on
ipa_auto_call_arg_values rather than on separate vectors.
(perform_estimation_of_a_value): Likewise.
(estimate_local_effects): Likewise.
(modify_known_vectors_with_val): Adjusted both variants to work on
ipa_auto_call_arg_values and rename them to
copy_known_vectors_add_val.
(decide_about_value): Adjusted to work on ipa_call_arg_values rather
than on separate vectors.
(decide_whether_version_node): Likewise.
* ipa-fnsummary.c (evaluate_conditions_for_known_args): Likewise.
(evaluate_properties_for_edge): Likewise.
(ipa_fn_summary_t::duplicate): Likewise.
(estimate_edge_devirt_benefit): Adjusted to work on
ipa_call_arg_values rather than on separate vectors.
(estimate_edge_size_and_time): Likewise.
(estimate_calls_size_and_time_1): Likewise.
(summarize_calls_size_and_time): Adjusted calls to
estimate_edge_size_and_time.
(estimate_calls_size_and_time): Adjusted to work on
ipa_call_arg_values rather than on separate vectors.
(ipa_call_context::ipa_call_context): Construct from a pointer to
ipa_auto_call_arg_values instead of inividual vectors.
(ipa_call_context::duplicate_from): Adjusted to access vectors within
m_avals.
(ipa_call_context::release): Likewise.
(ipa_call_context::equal_to): Likewise.
(ipa_call_context::estimate_size_and_time): Adjusted to work on
ipa_call_arg_values rather than on separate vectors.
(estimate_ipcp_clone_size_and_time): Adjusted to work with
ipa_auto_call_arg_values rather than on separate vectors.
(ipa_merge_fn_summary_after_inlining): Likewise. Adjusted call to
estimate_edge_size_and_time.
(ipa_update_overall_fn_summary): Adjusted call to
estimate_edge_size_and_time.
* ipa-inline-analysis.c (do_estimate_edge_time): Adjusted to work with
ipa_auto_call_arg_values rather than with separate vectors.
(do_estimate_edge_size): Likewise.
(do_estimate_edge_hints): Likewise.
* ipa-prop.c (ipa_auto_call_arg_values::~ipa_auto_call_arg_values):
New destructor.
2020-10-02 Joe Ramsay <joe.ramsay@arm.com>
* config/arm/arm_mve.h (__arm_vmaxnmavq): Remove coercion of scalar
argument.
(__arm_vmaxnmvq): Likewise.
(__arm_vminnmavq): Likewise.
(__arm_vminnmvq): Likewise.
(__arm_vmaxnmavq_p): Likewise.
(__arm_vmaxnmvq_p): Likewise (and delete duplicate definition).
(__arm_vminnmavq_p): Likewise.
(__arm_vminnmvq_p): Likewise.
(__arm_vmaxavq): Likewise.
(__arm_vmaxavq_p): Likewise.
(__arm_vmaxvq): Likewise.
(__arm_vmaxvq_p): Likewise.
(__arm_vminavq): Likewise.
(__arm_vminavq_p): Likewise.
(__arm_vminvq): Likewise.
(__arm_vminvq_p): Likewise.
2020-10-02 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/aarch64/aarch64.c (neoversev1_tunings): Define.
* config/aarch64/aarch64-cores.def (zeus): Use it.
(neoverse-v1): Likewise.
2020-10-02 Jan Hubicka <hubicka@ucw.cz>
* attr-fnspec.h: Update documentation.
(attr_fnsec::return_desc_size): Set to 2
(attr_fnsec::arg_desc_size): Set to 2
* builtin-attrs.def (STR1): Update fnspec.
* internal-fn.def (UBSAN_NULL): Update fnspec.
(UBSAN_VPTR): Update fnspec.
(UBSAN_PTR): Update fnspec.
(ASAN_CHECK): Update fnspec.
(GOACC_DIM_SIZE): Remove fnspec.
(GOACC_DIM_POS): Remove fnspec.
* tree-ssa-alias.c (attr_fnspec::verify): Update verification.
2020-10-02 Jan Hubicka <jh@suse.cz>
* attr-fnspec.h: New file.
* calls.c (decl_return_flags): Use attr_fnspec.
* gimple.c (gimple_call_arg_flags): Use attr_fnspec.
(gimple_call_return_flags): Use attr_fnspec.
* tree-into-ssa.c (pass_build_ssa::execute): Use attr_fnspec.
* tree-ssa-alias.c (attr_fnspec::verify): New member fuction.
2020-10-02 Jan Hubicka <jh@suse.cz>
* tree-ssa-alias.c (ao_ref_init_from_ptr_and_range): Break out from ...
(ao_ref_init_from_ptr_and_size): ... here.
2020-10-02 Jan Hubicka <hubicka@ucw.cz>
* data-streamer-in.c (streamer_read_poly_int64): New function.
* data-streamer-out.c (streamer_write_poly_int64): New function.
* data-streamer.h (streamer_write_poly_int64): Declare.
(streamer_read_poly_int64): Declare.
2020-10-02 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64-protos.h (aarch64_sve_pred_dominates_p):
Delete.
* config/aarch64/aarch64.c (aarch64_sve_pred_dominates_p): Likewise.
* config/aarch64/aarch64-sve.md: Add banner comment describing
how merging predicated FP operations are represented.
(*cond_<SVE_COND_FP_UNARY:optab><mode>_2): Split into...
(*cond_<SVE_COND_FP_UNARY:optab><mode>_2_relaxed): ...this and...
(*cond_<SVE_COND_FP_UNARY:optab><mode>_2_strict): ...this.
(*cond_<SVE_COND_FP_UNARY:optab><mode>_any): Split into...
(*cond_<SVE_COND_FP_UNARY:optab><mode>_any_relaxed): ...this and...
(*cond_<SVE_COND_FP_UNARY:optab><mode>_any_strict): ...this.
(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_2): Split into...
(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_2_relaxed): ...this and...
(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_2_strict): ...this.
(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_any): Split into...
(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_any_relaxed): ...this
and...
(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_any_strict): ...this.
(*cond_<SVE_COND_FP_BINARY:optab><mode>_2): Split into...
(*cond_<SVE_COND_FP_BINARY:optab><mode>_2_relaxed): ...this and...
(*cond_<SVE_COND_FP_BINARY:optab><mode>_2_strict): ...this.
(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_2_const): Split into...
(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_2_const_relaxed): ...this
and...
(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_2_const_strict): ...this.
(*cond_<SVE_COND_FP_BINARY:optab><mode>_3): Split into...
(*cond_<SVE_COND_FP_BINARY:optab><mode>_3_relaxed): ...this and...
(*cond_<SVE_COND_FP_BINARY:optab><mode>_3_strict): ...this.
(*cond_<SVE_COND_FP_BINARY:optab><mode>_any): Split into...
(*cond_<SVE_COND_FP_BINARY:optab><mode>_any_relaxed): ...this and...
(*cond_<SVE_COND_FP_BINARY:optab><mode>_any_strict): ...this.
(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_any_const): Split into...
(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_any_const_relaxed): ...this
and...
(*cond_<SVE_COND_FP_BINARY_I1:optab><mode>_any_const_strict): ...this.
(*cond_add<mode>_2_const): Split into...
(*cond_add<mode>_2_const_relaxed): ...this and...
(*cond_add<mode>_2_const_strict): ...this.
(*cond_add<mode>_any_const): Split into...
(*cond_add<mode>_any_const_relaxed): ...this and...
(*cond_add<mode>_any_const_strict): ...this.
(*cond_<SVE_COND_FCADD:optab><mode>_2): Split into...
(*cond_<SVE_COND_FCADD:optab><mode>_2_relaxed): ...this and...
(*cond_<SVE_COND_FCADD:optab><mode>_2_strict): ...this.
(*cond_<SVE_COND_FCADD:optab><mode>_any): Split into...
(*cond_<SVE_COND_FCADD:optab><mode>_any_relaxed): ...this and...
(*cond_<SVE_COND_FCADD:optab><mode>_any_strict): ...this.
(*cond_sub<mode>_3_const): Split into...
(*cond_sub<mode>_3_const_relaxed): ...this and...
(*cond_sub<mode>_3_const_strict): ...this.
(*aarch64_pred_abd<mode>): Split into...
(*aarch64_pred_abd<mode>_relaxed): ...this and...
(*aarch64_pred_abd<mode>_strict): ...this.
(*aarch64_cond_abd<mode>_2): Split into...
(*aarch64_cond_abd<mode>_2_relaxed): ...this and...
(*aarch64_cond_abd<mode>_2_strict): ...this.
(*aarch64_cond_abd<mode>_3): Split into...
(*aarch64_cond_abd<mode>_3_relaxed): ...this and...
(*aarch64_cond_abd<mode>_3_strict): ...this.
(*aarch64_cond_abd<mode>_any): Split into...
(*aarch64_cond_abd<mode>_any_relaxed): ...this and...
(*aarch64_cond_abd<mode>_any_strict): ...this.
(*cond_<SVE_COND_FP_TERNARY:optab><mode>_2): Split into...
(*cond_<SVE_COND_FP_TERNARY:optab><mode>_2_relaxed): ...this and...
(*cond_<SVE_COND_FP_TERNARY:optab><mode>_2_strict): ...this.
(*cond_<SVE_COND_FP_TERNARY:optab><mode>_4): Split into...
(*cond_<SVE_COND_FP_TERNARY:optab><mode>_4_relaxed): ...this and...
(*cond_<SVE_COND_FP_TERNARY:optab><mode>_4_strict): ...this.
(*cond_<SVE_COND_FP_TERNARY:optab><mode>_any): Split into...
(*cond_<SVE_COND_FP_TERNARY:optab><mode>_any_relaxed): ...this and...
(*cond_<SVE_COND_FP_TERNARY:optab><mode>_any_strict): ...this.
(*cond_<SVE_COND_FCMLA:optab><mode>_4): Split into...
(*cond_<SVE_COND_FCMLA:optab><mode>_4_relaxed): ...this and...
(*cond_<SVE_COND_FCMLA:optab><mode>_4_strict): ...this.
(*cond_<SVE_COND_FCMLA:optab><mode>_any): Split into...
(*cond_<SVE_COND_FCMLA:optab><mode>_any_relaxed): ...this and...
(*cond_<SVE_COND_FCMLA:optab><mode>_any_strict): ...this.
(*aarch64_pred_fac<cmp_op><mode>): Split into...
(*aarch64_pred_fac<cmp_op><mode>_relaxed): ...this and...
(*aarch64_pred_fac<cmp_op><mode>_strict): ...this.
(*cond_<optab>_nontrunc<SVE_FULL_F:mode><SVE_FULL_HSDI:mode>): Split
into...
(*cond_<optab>_nontrunc<SVE_FULL_F:mode><SVE_FULL_HSDI:mode>_relaxed):
...this and...
(*cond_<optab>_nontrunc<SVE_FULL_F:mode><SVE_FULL_HSDI:mode>_strict):
...this.
(*cond_<optab>_nonextend<SVE_FULL_HSDI:mode><SVE_FULL_F:mode>): Split
into...
(*cond_<optab>_nonextend<SVE_FULL_HSDI:mode><SVE_FULL_F:mode>_relaxed):
...this and...
(*cond_<optab>_nonextend<SVE_FULL_HSDI:mode><SVE_FULL_F:mode>_strict):
...this.
* config/aarch64/aarch64-sve2.md
(*cond_<SVE2_COND_FP_UNARY_LONG:optab><mode>): Split into...
(*cond_<SVE2_COND_FP_UNARY_LONG:optab><mode>_relaxed): ...this and...
(*cond_<SVE2_COND_FP_UNARY_LONG:optab><mode>_strict): ...this.
(*cond_<SVE2_COND_FP_UNARY_NARROWB:optab><mode>_any): Split into...
(*cond_<SVE2_COND_FP_UNARY_NARROWB:optab><mode>_any_relaxed): ...this
and...
(*cond_<SVE2_COND_FP_UNARY_NARROWB:optab><mode>_any_strict): ...this.
(*cond_<SVE2_COND_INT_UNARY_FP:optab><mode>): Split into...
(*cond_<SVE2_COND_INT_UNARY_FP:optab><mode>_relaxed): ...this and...
(*cond_<SVE2_COND_INT_UNARY_FP:optab><mode>_strict): ...this.
2020-10-02 Richard Sandiford <richard.sandiford@arm.com>
* config/arm/neon.md (*sub<VDQ:mode>3_neon): Use the new mode macros
for the insn condition.
(sub<VH:mode>3, *mul<VDQW:mode>3_neon): Likewise.
(mul<VDQW:mode>3add<VDQW:mode>_neon): Likewise.
(mul<VH:mode>3add<VH:mode>_neon): Likewise.
(mul<VDQW:mode>3neg<VDQW:mode>add<VDQW:mode>_neon): Likewise.
(fma<VCVTF:mode>4, fma<VH:mode>4, *fmsub<VCVTF:mode>4): Likewise.
(quad_halves_<code>v4sf, reduc_plus_scal_<VD:mode>): Likewise.
(reduc_plus_scal_<VQ:mode>, reduc_smin_scal_<VD:mode>): Likewise.
(reduc_smin_scal_<VQ:mode>, reduc_smax_scal_<VD:mode>): Likewise.
(reduc_smax_scal_<VQ:mode>, mul<VH:mode>3): Likewise.
(neon_vabd<VF:mode>_2, neon_vabd<VF:mode>_3): Likewise.
(fma<VH:mode>4_intrinsic): Delete.
(neon_vadd<VCVTF:mode>): Use the new mode macros to decide which
form of instruction to generate.
(neon_vmla<VDQW:mode>, neon_vmls<VDQW:mode>): Likewise.
(neon_vsub<VCVTF:mode>): Likewise.
(neon_vfma<VH:mode>): Generate the main fma<mode>4 form instead
of using fma<mode>4_intrinsic.
2020-10-02 Martin Liska <mliska@suse.cz>
PR gcov-profile/97193
* coverage.c (coverage_init): GCDA note files should not be
mangled and should end in output directory.
2020-10-02 Jason Merril <jason@redhat.com>
* gimple.h (gimple_call_operator_delete_p): Rename from
gimple_call_replaceable_operator_delete_p.
* gimple.c (gimple_call_operator_delete_p): Likewise.
* tree.h (DECL_IS_REPLACEABLE_OPERATOR_DELETE_P): Remove.
* tree-ssa-dce.c (mark_all_reaching_defs_necessary_1): Adjust.
(propagate_necessity): Likewise.
(eliminate_unnecessary_stmts): Likewise.
* tree-ssa-structalias.c (find_func_aliases_for_call): Likewise.
2020-10-02 Richard Biener <rguenther@suse.de>
* gimple.h (GF_CALL_FROM_NEW_OR_DELETE): New call flag.
(gimple_call_set_from_new_or_delete): New.
(gimple_call_from_new_or_delete): Likewise.
* gimple.c (gimple_build_call_from_tree): Set
GF_CALL_FROM_NEW_OR_DELETE appropriately.
* ipa-icf-gimple.c (func_checker::compare_gimple_call):
Compare gimple_call_from_new_or_delete.
* tree-ssa-dce.c (mark_all_reaching_defs_necessary_1): Make
sure to only consider new/delete calls from new or delete
expressions.
(propagate_necessity): Likewise.
(eliminate_unnecessary_stmts): Likewise.
* tree-ssa-structalias.c (find_func_aliases_for_call):
Likewise.
2020-10-02 Jason Merril <jason@redhat.com>
* tree.h (CALL_FROM_NEW_OR_DELETE_P): Move from cp-tree.h.
* tree-core.h: Document new usage of protected_flag.
2020-10-02 Aldy Hernandez <aldyh@redhat.com>
* value-range.h (irange::fits_p): New.
2020-10-01 Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.c (rs6000_legitimize_address): Use
gen_int_mode for high part of address constant.
2020-10-01 Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.c (rs6000_linux64_override_options):
Formatting. Correct setting of TARGET_NO_FP_IN_TOC and
TARGET_NO_SUM_IN_TOC.
2020-10-01 Alan Modra <amodra@gmail.com>
* config/rs6000/freebsd64.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Use
rs6000_linux64_override_options.
* config/rs6000/linux64.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Break
out to..
* config/rs6000/rs6000.c (rs6000_linux64_override_options): ..this,
new function. Tweak non-biarch test and clearing of
profile_kernel to work with freebsd64.h.
2020-10-01 Martin Liska <mliska@suse.cz>
* config/rs6000/rs6000-call.c: Include value-range.h.
* config/rs6000/rs6000.c: Likewise.
2020-10-01 Tom de Vries <tdevries@suse.de>
PR target/80845
* config/nvptx/nvptx.md (define_insn "truncsi<QHIM>2"): Emit mov.u32
instead of cvt.u32.u32.
2020-10-01 Richard Sandiford <richard.sandiford@arm.com>
PR target/96528
PR target/97288
* config/arm/arm-protos.h (arm_expand_vector_compare): Declare.
(arm_expand_vcond): Likewise.
* config/arm/arm.c (arm_expand_vector_compare): New function.
(arm_expand_vcond): Likewise.
* config/arm/neon.md (vec_cmp<VDQW:mode><v_cmp_result>): New pattern.
(vec_cmpu<VDQW:mode><VDQW:mode>): Likewise.
(vcond<VDQW:mode><VDQW:mode>): Require operand 5 to be a register
or zero. Use arm_expand_vcond.
(vcond<V_cvtto><V32:mode>): New pattern.
(vcondu<VDQIW:mode><VDQIW:mode>): Generalize to...
(vcondu<VDQW:mode><v_cmp_result): ...this. Require operand 5
to be a register or zero. Use arm_expand_vcond.
(vcond_mask_<VDQW:mode><v_cmp_result>): New pattern.
(neon_vc<cmp_op><mode>, neon_vc<cmp_op><mode>_insn): Add "@" marker.
(neon_vbsl<mode>): Likewise.
(neon_vc<cmp_op>u<mode>): Reexpress as...
(@neon_vc<code><mode>): ...this.
2020-10-01 Michael Davidsaver <mdavidsaver@gmail.com>
* config/i386/t-rtems: Change from mtune to march when building
multilibs. The mtune argument tunes or optimizes for a specific
CPU model but does not ensure the generated code is appropriate
for the CPU model. Prior to this patch, i386 compatible code
was always generated but tuned for later models.
2020-10-01 Aldy Hernandez <aldyh@redhat.com>
* builtins.c (compute_objsize): Replace vr_values with range_query.
(get_range): Same.
(gimple_call_alloc_size): Same.
* builtins.h (class vr_values): Remove.
(gimple_call_alloc_size): Replace vr_values with range_query.
* gimple-ssa-sprintf.c (get_int_range): Same.
(struct directive): Pass gimple context to fmtfunc callback.
(directive::set_width): Replace inline with out-of-line version.
(directive::set_precision): Same.
(format_none): New gimple argument.
(format_percent): New gimple argument.
(format_integer): New gimple argument.
(format_floating): New gimple argument.
(get_string_length): Use range_query API.
(format_character): New gimple argument.
(format_string): New gimple argument.
(format_plain): New gimple argument.
(format_directive): New gimple argument.
(parse_directive): Replace vr_values with range_query.
(compute_format_length): Same.
(handle_printf_call): Same. Adjust for range_query API.
* tree-ssa-strlen.c (get_range): Same.
(compare_nonzero_chars): Same.
(get_addr_stridx) Replace vr_values with range_query.
(get_stridx): Same.
(dump_strlen_info): Same.
(get_range_strlen_dynamic): Adjust for range_query API.
(set_strlen_range): Same
(maybe_warn_overflow): Replace vr_values with range_query.
(handle_builtin_strcpy): Same.
(maybe_diag_stxncpy_trunc): Add FIXME comment.
(handle_builtin_memcpy): Replace vr_values with range_query.
(handle_builtin_memset): Same.
(get_len_or_size): Same.
(strxcmp_eqz_result): Same.
(handle_builtin_string_cmp): Same.
(count_nonzero_bytes_addr): Same, plus adjust for range_query API.
(count_nonzero_bytes): Replace vr_values with range_query.
(handle_store): Same.
(strlen_check_and_optimize_call): Same.
(handle_integral_assign): Same.
(check_and_optimize_stmt): Same.
* tree-ssa-strlen.h (class vr_values): Remove.
(get_range): Replace vr_values with range_query.
(get_range_strlen_dynamic): Same.
(handle_printf_call): Same.
2020-10-01 Aldy Hernandez <aldyh@redhat.com>
* gimple-loop-versioning.cc (lv_dom_walker::before_dom_children):
Pass m_range_analyzer instead of get_vr_values.
(loop_versioning::name_prop::get_value): Rename to...
(loop_versioning::name_prop::value_of_expr): ...this.
* gimple-ssa-evrp-analyze.c (evrp_range_analyzer::evrp_range_analyzer):
Adjust for evrp_range_analyzer
inheriting from vr_values.
(evrp_range_analyzer::try_find_new_range): Same.
(evrp_range_analyzer::record_ranges_from_incoming_edge): Same.
(evrp_range_analyzer::record_ranges_from_phis): Same.
(evrp_range_analyzer::record_ranges_from_stmt): Same.
(evrp_range_analyzer::push_value_range): Same.
(evrp_range_analyzer::pop_value_range): Same.
* gimple-ssa-evrp-analyze.h (class evrp_range_analyzer): Inherit from
vr_values. Adjust accordingly.
* gimple-ssa-evrp.c: Adjust for evrp_range_analyzer inheriting from
vr_values.
(evrp_folder::value_of_evrp): Rename from get_value.
* tree-ssa-ccp.c (class ccp_folder): Rename get_value to
value_of_expr.
(ccp_folder::get_value): Rename to...
(ccp_folder::value_of_expr): ...this.
* tree-ssa-copy.c (class copy_folder): Rename get_value to
value_of_expr.
(copy_folder::get_value): Rename to...
(copy_folder::value_of_expr): ...this.
* tree-ssa-dom.c (dom_opt_dom_walker::after_dom_children): Adjust
for evrp_range_analyzer inheriting from vr_values.
(dom_opt_dom_walker::optimize_stmt): Same.
* tree-ssa-propagate.c (substitute_and_fold_engine::replace_uses_in):
Call value_of_* instead of get_value.
(substitute_and_fold_engine::replace_phi_args_in): Same.
(substitute_and_fold_engine::propagate_into_phi_args): Same.
(substitute_and_fold_dom_walker::before_dom_children): Same.
* tree-ssa-propagate.h: Include value-query.h.
(class substitute_and_fold_engine): Inherit from value_query.
* tree-ssa-strlen.c (strlen_dom_walker::before_dom_children):
Adjust for evrp_range_analyzer inheriting from vr_values.
* tree-ssa-threadedge.c (record_temporary_equivalences_from_phis):
Same.
* tree-vrp.c (class vrp_folder): Same.
(vrp_folder::get_value): Rename to value_of_expr.
* vr-values.c (vr_values::get_lattice_entry): Adjust for
vr_values inheriting from range_query.
(vr_values::range_of_expr): New.
(vr_values::value_of_expr): New.
(vr_values::value_on_edge): New.
(vr_values::value_of_stmt): New.
(simplify_using_ranges::op_with_boolean_value_range_p): Call
get_value_range through query.
(check_for_binary_op_overflow): Rename store to query.
(vr_values::vr_values): Remove vrp_value_range_pool.
(vr_values::~vr_values): Same.
(simplify_using_ranges::get_vr_for_comparison): Call get_value_range
through query.
(simplify_using_ranges::compare_names): Same.
(simplify_using_ranges::vrp_evaluate_conditional): Same.
(simplify_using_ranges::vrp_visit_cond_stmt): Same.
(simplify_using_ranges::simplify_abs_using_ranges): Same.
(simplify_using_ranges::simplify_cond_using_ranges_1): Same.
(simplify_cond_using_ranges_2): Same.
(simplify_using_ranges::simplify_switch_using_ranges): Same.
(simplify_using_ranges::two_valued_val_range_p): Same.
(simplify_using_ranges::simplify_using_ranges): Rename store to query.
(simplify_using_ranges::simplify): Assert that we have a query.
* vr-values.h (class range_query): Remove.
(class simplify_using_ranges): Remove inheritance of range_query.
(class vr_values): Add virtuals for range_of_expr, value_of_expr,
value_on_edge, value_of_stmt, and get_value_range.
Call range_query allocator instead of using vrp_value_range_pool.
Remove vrp_value_range_pool.
(simplify_using_ranges::get_value_range): Remove.
2020-10-01 Richard Biener <rguenther@suse.de>
PR tree-optimization/97236
* tree-vect-stmts.c (get_group_load_store_type): Keep
VMAT_ELEMENTWISE for single-element vectors.
2020-10-01 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (compute_parm_map): Be ready for callee_pi to be NULL.
2020-10-01 Jan Hubicka <jh@suse.cz>
PR ipa/97244
* ipa-fnsummary.c (pass_free_fnsummary::execute): Free
also indirect inlining datastructure.
* ipa-modref.c (pass_ipa_modref::execute): Do not free them here.
* ipa-prop.c (ipa_free_all_node_params): Do not crash when info does
not exist.
(ipa_unregister_cgraph_hooks): Likewise.
2020-10-01 Jan Hubicka <jh@suse.cz>
* internal-fn.c (DEF_INTERNAL_FN): Fix handling of fnspec
2020-10-01 Aldy Hernandez <aldyh@redhat.com>
* Makefile.in: Add value-query.o.
* value-query.cc: New file.
* value-query.h: New file.
2020-10-01 Alex Coplan <alex.coplan@arm.com>
* config/arm/arm-cpus.in: Fix ordering, move Neoverse N2 down.
* config/arm/arm-tables.opt: Regenerate.
* config/arm/arm-tune.md: Regenerate.
2020-10-01 Jakub Jelinek <jakub@redhat.com>
* config/s390/s390.c (s390_atomic_assign_expand_fenv): Use
TARGET_EXPR instead of MODIFY_EXPR for the first assignments to
fenv_var and old_fpc. Formatting fixes.
2020-10-01 Richard Biener <rguenther@suse.de>
* tree-vect-patterns.c (vect_recog_bool_pattern): Also handle
VIEW_CONVERT_EXPR.
2020-10-01 Florian Weimer <fweimer@redhat.com>
PR target/97250
* config/i386/i386.h (PTA_NO_TUNE, PTA_X86_64_BASELINE)
(PTA_X86_64_V2, PTA_X86_64_V3, PTA_X86_64_V4): New.
* common/config/i386/i386-common.c (processor_alias_table):
Add "x86-64-v2", "x86-64-v3", "x86-64-v4".
* config/i386/i386-options.c (ix86_option_override_internal):
Handle new PTA_NO_TUNE processor table entries.
* doc/invoke.texi (x86 Options): Document new -march values.
2020-10-01 Alan Modra <amodra@gmail.com>
* config/rs6000/ppc-asm.h: Support __PCREL__ code.
2020-10-01 Alan Modra <amodra@gmail.com>
* config/rs6000/linux64.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Don't
set -mcmodel=small for -mno-minimal-toc when pcrel.
2020-09-30 Martin Sebor <msebor@redhat.com>
PR middle-end/97189
* attribs.c (attr_access::array_as_string): Avoid assuming a VLA
access specification string contains a closing bracket.
2020-09-30 Martin Sebor <msebor@redhat.com>
PR c/97206
* attribs.c (attr_access::array_as_string): Avoid modifying a shared
type in place and use build_type_attribute_qual_variant instead.
2020-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/arm/arm-cpus.in: Add Cortex-A78 and Cortex-A78AE cores.
* config/arm/arm-tables.opt: Regenerate.
* config/arm/arm-tune.md: Regenerate.
* doc/invoke.texi: Update docs.
2020-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/aarch64/aarch64-cores.def: Add Cortex-A78 and Cortex-A78AE cores.
* config/aarch64/aarch64-tune.md: Regenerate.
* doc/invoke.texi: Add -mtune=cortex-a78 and -mtune=cortex-a78ae.
2020-09-30 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
PR target/96795
* config/arm/arm_mve.h (__ARM_mve_coerce2): Define.
(__arm_vaddq): Correct the scalar argument.
(__arm_vaddq_m): Likewise.
(__arm_vaddq_x): Likewise.
(__arm_vcmpeqq_m): Likewise.
(__arm_vcmpeqq): Likewise.
(__arm_vcmpgeq_m): Likewise.
(__arm_vcmpgeq): Likewise.
(__arm_vcmpgtq_m): Likewise.
(__arm_vcmpgtq): Likewise.
(__arm_vcmpleq_m): Likewise.
(__arm_vcmpleq): Likewise.
(__arm_vcmpltq_m): Likewise.
(__arm_vcmpltq): Likewise.
(__arm_vcmpneq_m): Likewise.
(__arm_vcmpneq): Likewise.
(__arm_vfmaq_m): Likewise.
(__arm_vfmaq): Likewise.
(__arm_vfmasq_m): Likewise.
(__arm_vfmasq): Likewise.
(__arm_vmaxnmavq): Likewise.
(__arm_vmaxnmavq_p): Likewise.
(__arm_vmaxnmvq): Likewise.
(__arm_vmaxnmvq_p): Likewise.
(__arm_vminnmavq): Likewise.
(__arm_vminnmavq_p): Likewise.
(__arm_vminnmvq): Likewise.
(__arm_vminnmvq_p): Likewise.
(__arm_vmulq_m): Likewise.
(__arm_vmulq): Likewise.
(__arm_vmulq_x): Likewise.
(__arm_vsetq_lane): Likewise.
(__arm_vsubq_m): Likewise.
(__arm_vsubq): Likewise.
(__arm_vsubq_x): Likewise.
2020-09-30 Joel Hutton <joel.hutton@arm.com>
PR target/96837
* tree-vect-slp.c (vect_analyze_slp): Do not call
vect_attempt_slp_rearrange_stmts for vector constructors.
2020-09-30 Tamar Christina <tamar.christina@arm.com>
* tree-vectorizer.h (SLP_TREE_REF_COUNT): New.
* tree-vect-slp.c (_slp_tree::_slp_tree, _slp_tree::~_slp_tree,
vect_free_slp_tree, vect_build_slp_tree, vect_print_slp_tree,
slp_copy_subtree, vect_attempt_slp_rearrange_stmts): Use it.
2020-09-30 Tobias Burnus <tobias@codesourcery.com>
* omp-offload.c (omp_discover_implicit_declare_target): Also
handled nested functions.
2020-09-30 Tobias Burnus <tobias@codesourcery.com>
Tom de Vries <tdevries@suse.de>
* builtins.c (expand_builtin_cexpi, fold_builtin_sincos): Update
targetm.libc_has_function call.
* builtins.def (DEF_C94_BUILTIN, DEF_C99_BUILTIN, DEF_C11_BUILTIN):
(DEF_C2X_BUILTIN, DEF_C99_COMPL_BUILTIN, DEF_C99_C90RES_BUILTIN):
Same.
* config/darwin-protos.h (darwin_libc_has_function): Update prototype.
* config/darwin.c (darwin_libc_has_function): Add arg.
* config/linux-protos.h (linux_libc_has_function): Update prototype.
* config/linux.c (linux_libc_has_function): Add arg.
* config/i386/i386.c (ix86_libc_has_function): Update
targetm.libc_has_function call.
* config/nvptx/nvptx.c (nvptx_libc_has_function): New function.
(TARGET_LIBC_HAS_FUNCTION): Redefine to nvptx_libc_has_function.
* convert.c (convert_to_integer_1): Update targetm.libc_has_function
call.
* match.pd: Same.
* target.def (libc_has_function): Add arg.
* doc/tm.texi: Regenerate.
* targhooks.c (default_libc_has_function, gnu_libc_has_function)
(no_c99_libc_has_function): Add arg.
* targhooks.h (default_libc_has_function, no_c99_libc_has_function)
(gnu_libc_has_function): Update prototype.
* tree-ssa-math-opts.c (pass_cse_sincos::execute): Update
targetm.libc_has_function call.
2020-09-30 H.J. Lu <hjl.tools@gmail.com>
PR target/97184
* config/i386/i386.md (UNSPECV_MOVDIRI): Renamed to ...
(UNSPEC_MOVDIRI): This.
(UNSPECV_MOVDIR64B): Renamed to ...
(UNSPEC_MOVDIR64B): This.
(movdiri<mode>): Use SET operation.
(@movdir64b_<mode>): Likewise.
2020-09-30 Florian Weimer <fweimer@redhat.com>
* config/i386/i386-c.c (ix86_target_macros_internal): Define
__LAHF_SAHF__ and __MOVBE__ based on ISA flags.
2020-09-30 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/97150
* config/aarch64/arm_neon.h (vqrshlb_u8): Make second argument
signed.
(vqrshlh_u16): Likewise.
(vqrshls_u32): Likewise.
(vqrshld_u64): Likewise.
(vqshlb_u8): Likewise.
(vqshlh_u16): Likewise.
(vqshls_u32): Likewise.
(vqshld_u64): Likewise.
(vshld_u64): Likewise.
2020-09-30 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/96313
* config/aarch64/aarch64-simd-builtins.def (sqmovun): Use UNOPUS
qualifiers.
* config/aarch64/arm_neon.h (vqmovun_s16): Adjust builtin call.
Remove unnecessary result cast.
(vqmovun_s32): Likewise.
(vqmovun_s64): Likewise.
(vqmovunh_s16): Likewise. Fix return type.
(vqmovuns_s32): Likewise.
(vqmovund_s64): Likewise.
2020-09-30 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64.c (aarch64_split_128bit_move_p): Add a
function comment. Tighten check for FP moves.
* config/aarch64/aarch64.md (*movti_aarch64): Add a w<-Z alternative.
(*movtf_aarch64): Handle r<-Y like r<-r. Remove unnecessary
earlyclobber. Change splitter predicate from aarch64_reg_or_imm
to nonmemory_operand.
2020-09-30 Alex Coplan <alex.coplan@arm.com>
PR target/97251
* config/arm/arm.md (movsf): Relax TARGET_HARD_FLOAT to
TARGET_VFP_BASE.
(movdf): Likewise.
* config/arm/vfp.md (no_literal_pool_df_immediate): Likewise.
(no_literal_pool_sf_immediate): Likewise.
2020-09-30 Alan Modra <amodra@gmail.com>
* configure.ac (--with-long-double-format): Typo fix.
* configure: Regenerate.
2020-09-30 Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.md (@tablejump<mode>_normal): Don't use
non-existent operands[].
(@tablejump<mode>_nospec): Likewise.
2020-09-30 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/rs6000.md (tablejump): Simplify.
(tablejumpsi): Merge this ...
(tablejumpdi): ... and this ...
(@tablejump<mode>_normal): ... into this.
(tablejumpsi_nospec): Merge this ...
(tablejumpdi_nospec): ... and this ...
(@tablejump<mode>_nospec): ... into this.
(*tablejump<mode>_internal1): Delete, rename to ...
(@tablejump<mode>_insn_normal): ... this.
(*tablejump<mode>_internal1_nospec): Delete, rename to ...
(@tablejump<mode>_insn_nospec): ... this.
2020-09-29 Martin Sebor <msebor@redhat.com>
PR middle-end/97188
* calls.c (maybe_warn_rdwr_sizes): Simplify warning messages.
Correct handling of VLA argumments.
2020-09-29 Marek Polacek <polacek@redhat.com>
PR c++/94695
* doc/invoke.texi: Document -Wrange-loop-construct.
2020-09-29 Jim Wilson <jimw@sifive.com>
PR bootstrap/97183
* configure.ac (gcc_cv_header_zstd_h): Check ZSTD_VERISON_NUMBER.
* configure: Regenerated.
2020-09-29 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/arm/arm-cpus.in: Add Cortex-X1 core.
* config/arm/arm-tables.opt: Regenerate.
* config/arm/arm-tune.md: Regenerate.
* doc/invoke.texi: Update docs.
2020-09-29 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/aarch64/aarch64-cores.def: Add Cortex-X1 Arm core.
* config/aarch64/aarch64-tune.md: Regenerate.
* doc/invoke.texi: Add -mtune=cortex-x1 docs.
2020-09-29 H.J. Lu <hjl.tools@gmail.com>
PR target/97247
* config/i386/enqcmdintrin.h: Replace <enqcmdntrin.h> with
<enqcmdintrin.h>. Replace _ENQCMDNTRIN_H_INCLUDED with
_ENQCMDINTRIN_H_INCLUDED.
2020-09-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/97241
* tree-vect-loop.c (vectorizable_reduction): Move finding
the SLP node for the reduction stmt to a better place.
2020-09-29 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_analyze_slp): Move SLP reduction
re-arrangement and SLP graph load gathering...
(vect_optimize_slp): ... here.
* tree-vectorizer.h (vec_info::slp_loads): Remove.
2020-09-29 Hongyu Wang <hongyu.wang@intel.com>
PR target/97231
* config/i386/amxbf16intrin.h: Add FSF copyright notes.
* config/i386/amxint8intrin.h: Ditto.
* config/i386/amxtileintrin.h: Ditto.
* config/i386/avx512vp2intersectintrin.h: Ditto.
* config/i386/avx512vp2intersectvlintrin.h: Ditto.
* config/i386/pconfigintrin.h: Ditto.
* config/i386/tsxldtrkintrin.h: Ditto.
* config/i386/wbnoinvdintrin.h: Ditto.
2020-09-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/97238
* tree-ssa-reassoc.c (ovce_extract_ops): Fix typo.
2020-09-29 Richard Sandiford <richard.sandiford@arm.com>
* config/arm/arm.h (ARM_HAVE_NEON_V8QI_ARITH, ARM_HAVE_NEON_V4HI_ARITH)
(ARM_HAVE_NEON_V2SI_ARITH, ARM_HAVE_NEON_V16QI_ARITH): New macros.
(ARM_HAVE_NEON_V8HI_ARITH, ARM_HAVE_NEON_V4SI_ARITH): Likewise.
(ARM_HAVE_NEON_V2DI_ARITH, ARM_HAVE_NEON_V4HF_ARITH): Likewise.
(ARM_HAVE_NEON_V8HF_ARITH, ARM_HAVE_NEON_V2SF_ARITH): Likewise.
(ARM_HAVE_NEON_V4SF_ARITH, ARM_HAVE_V8QI_ARITH, ARM_HAVE_V4HI_ARITH)
(ARM_HAVE_V2SI_ARITH, ARM_HAVE_V16QI_ARITH, ARM_HAVE_V8HI_ARITH)
(ARM_HAVE_V4SI_ARITH, ARM_HAVE_V2DI_ARITH, ARM_HAVE_V4HF_ARITH)
(ARM_HAVE_V2SF_ARITH, ARM_HAVE_V8HF_ARITH, ARM_HAVE_V4SF_ARITH):
Likewise.
* config/arm/iterators.md (VNIM, VNINOTM): Delete.
* config/arm/vec-common.md (add<VNIM:mode>3, addv8hf3)
(add<VNINOTM:mode>3): Replace with...
(add<VDQ:mode>3): ...this new expander.
* config/arm/neon.md (*add<VDQ:mode>3_neon): Use the new
ARM_HAVE_NEON_<MODE>_ARITH macros as the C condition.
(addv8hf3_neon, addv4hf3, add<VFH:mode>3_fp16): Delete in
favor of the above.
(neon_vadd<VH:mode>): Use gen_add<mode>3 instead of
gen_add<mode>3_fp16.
2020-09-29 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/riscv-c.c (riscv_cpu_cpp_builtins): Define
__riscv_cmodel_medany when PIC mode.
2020-09-29 Alex Coplan <alex.coplan@arm.com>
* config/aarch64/aarch64-cores.def: Move neoverse-n2 after saphira.
* config/aarch64/aarch64-tune.md: Regenerate.
2020-09-29 Martin Liska <mliska@suse.cz>
PR tree-optimization/96979
* tree-switch-conversion.c (jump_table_cluster::can_be_handled):
Make a fast bail out.
(bit_test_cluster::can_be_handled): Likewise here.
* tree-switch-conversion.h (get_range): Use wi::to_wide instead
of a folding.
2020-09-29 Martin Liska <mliska@suse.cz>
Revert:
2020-09-22 Martin Liska <mliska@suse.cz>
PR tree-optimization/96979
* doc/invoke.texi: Document new param max-switch-clustering-attempts.
* params.opt: Add new parameter.
* tree-switch-conversion.c (jump_table_cluster::find_jump_tables):
Limit number of attempts.
(bit_test_cluster::find_bit_tests): Likewise.
2020-09-28 Aldy Hernandez <aldyh@redhat.com>
* value-range.h (class irange): Add irange_allocator friend.
(class irange_allocator): New.
2020-09-28 Tobias Burnus <tobias@codesourcery.com>
PR middle-end/96390
* omp-offload.c (omp_discover_declare_target_tgt_fn_r): Handle
alias nodes.
2020-09-28 Paul A. Clarke <pc@us.ibm.com>
* config/rs6000/smmintrin.h (_mm_insert_epi8): New.
(_mm_insert_epi32): New.
(_mm_insert_epi64): New.
2020-09-28 liuhongt <hongtao.liu@intel.com>
* common/config/i386/i386-common.c (OPTION_MASK_ISA2_AMX_TILE_SET,
OPTION_MASK_ISA2_AMX_INT8_SET, OPTION_MASK_ISA2_AMX_BF16_SET,
OPTION_MASK_ISA2_AMX_TILE_UNSET, OPTION_MASK_ISA2_AMX_INT8_UNSET,
OPTION_MASK_ISA2_AMX_BF16_UNSET, OPTION_MASK_ISA2_XSAVE_UNSET):
New marcos.
(ix86_handle_option): Hanlde -mamx-tile, -mamx-int8, -mamx-bf16.
* common/config/i386/i386-cpuinfo.h (processor_types): Add
FEATURE_AMX_TILE, FEATURE_AMX_INT8, FEATURE_AMX_BF16.
* common/config/i386/cpuinfo.h (XSTATE_TILECFG,
XSTATE_TILEDATA, XCR_AMX_ENABLED_MASK): New macro.
(get_available_features): Enable AMX features only if
their states are suoorited by OSXSAVE.
* common/config/i386/i386-isas.h: Add ISA_NAME_TABLE_ENTRY
for amx-tile, amx-int8, amx-bf16.
* config.gcc: Add amxtileintrin.h, amxint8intrin.h,
amxbf16intrin.h to extra headers.
* config/i386/amxbf16intrin.h: New file.
* config/i386/amxint8intrin.h: Ditto.
* config/i386/amxtileintrin.h: Ditto.
* config/i386/cpuid.h (bit_AMX_BF16, bit_AMX_TILE, bit_AMX_INT8):
New macro.
* config/i386/i386-c.c (ix86_target_macros_internal): Define
__AMX_TILE__, __AMX_INT8__, AMX_BF16__.
* config/i386/i386-options.c (ix86_target_string): Add
-mamx-tile, -mamx-int8, -mamx-bf16.
(ix86_option_override_internal): Handle AMX-TILE,
AMX-INT8, AMX-BF16.
* config/i386/i386.h (TARGET_AMX_TILE, TARGET_AMX_TILE_P,
TARGET_AMX_INT8, TARGET_AMX_INT8_P, TARGET_AMX_BF16_P,
PTA_AMX_TILE, PTA_AMX_INT8, PTA_AMX_BF16): New macros.
* config/i386/i386.opt: Add -mamx-tile, -mamx-int8, -mamx-bf16.
* config/i386/immintrin.h: Include amxtileintrin.h,
amxint8intrin.h, amxbf16intrin.h.
* doc/invoke.texi: Document -mamx-tile, -mamx-int8, -mamx-bf16.
* doc/extend.texi: Document amx-tile, amx-int8, amx-bf16.
* doc/sourcebuild.texi ((Effective-Target Keywords, Other
hardware attributes): Document amx_int8, amx_tile, amx_bf16.
2020-09-28 Andrea Corallo <andrea.corallo@arm.com>
* config/aarch64/aarch64-builtins.c
(aarch64_general_expand_builtin): Do not alter value on a
force_reg returned rtx.
2020-09-28 Eric Botcazou <ebotcazou@adacore.com>
* tree-eh.c (lower_try_finally_dup_block): Revert latest change.
2020-09-27 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (modref_summary::useful_p): Fix testing of stores.
2020-09-27 Jakub Jelinek <jakub@redhat.com>
PR middle-end/97073
* optabs.c (expand_binop, expand_absneg_bit, expand_unop,
expand_copysign_bit): Check reg_overlap_mentioned_p between target
and operand(s) and if it returns true, force a pseudo as target.
2020-09-27 Xionghu Luo <luoxhu@linux.ibm.com>
* gimple-isel.cc (gimple_expand_vec_set_expr): New function.
(gimple_expand_vec_cond_exprs): Rename to ...
(gimple_expand_vec_exprs): ... this and call
gimple_expand_vec_set_expr.
* internal-fn.c (vec_set_direct): New define.
(expand_vec_set_optab_fn): New function.
(direct_vec_set_optab_supported_p): New define.
* internal-fn.def (VEC_SET): New DEF_INTERNAL_OPTAB_FN.
* optabs.c (can_vec_set_var_idx_p): New function.
* optabs.h (can_vec_set_var_idx_p): New declaration.
2020-09-26 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (analyze_stmt): Do not skip clobbers in early pass.
* ipa-pure-const.c (analyze_stmt): Update comment.
2020-09-26 David Edelsohn <dje.gcc@gmail.com>
Clement Chigot <clement.chigot@atos.com>
* collect2.c (visibility_flag): New.
(main): Detect -fvisibility.
(write_c_file_stat): Push and pop default visibility.
2020-09-26 Jan Hubicka <hubicka@ucw.cz>
* ipa-inline-transform.c: Include ipa-modref-tree.h and ipa-modref.h.
(inline_call): Call ipa_merge_modref_summary_after_inlining.
* ipa-inline.c (ipa_inline): Do not free summaries.
* ipa-modref.c (dump_records): Fix formating.
(merge_call_side_effects): Break out from ...
(analyze_call): ... here; record recursive calls.
(analyze_stmt): Add new parameter RECURSIVE_CALLS.
(analyze_function): Do iterative dataflow on recursive calls.
(compute_parm_map): New function.
(ipa_merge_modref_summary_after_inlining): New function.
(collapse_loads): New function.
(modref_propagate_in_scc): Break out from ...
(pass_ipa_modref::execute): ... here; Do iterative dataflow.
* ipa-modref.h (ipa_merge_modref_summary_after_inlining): Declare.
2020-09-26 Jakub Jelinek <jakub@redhat.com>
* omp-expand.c (expand_omp_simd): Help vectorizer for the collapse == 1
and non-composite collapse > 1 case with non-constant innermost loop
step by precomputing number of iterations before loop and using an
alternate IV from 0 to number of iterations - 1 with step of 1.
2020-09-26 Jan Hubicka <jh@suse.cz>
* ipa-fnsummary.c (dump_ipa_call_summary): Dump
points_to_local_or_readonly_memory flag.
(analyze_function_body): Compute points_to_local_or_readonly_memory
flag.
(remap_edge_change_prob): Rename to ...
(remap_edge_params): ... this one; update
points_to_local_or_readonly_memory.
(remap_edge_summaries): Update.
(read_ipa_call_summary): Stream the new flag.
(write_ipa_call_summary): Likewise.
* ipa-predicate.h (struct inline_param_summary): Add
points_to_local_or_readonly_memory.
(inline_param_summary::equal_to): Update.
(inline_param_summary::useless_p): Update.
2020-09-26 Jan Hubicka <hubicka@ucw.cz>
* ipa-modref-tree.h (modref_ref_node::insert_access): Track if something
changed.
(modref_base_node::insert_ref): Likewise (and add a new optional
argument)
(modref_tree::insert): Likewise.
(modref_tree::merge): Rewrite
2020-09-25 Jan Hubicka <hubicka@ucw.cz>
* doc/invoke.texi: Add -fno-ipa-modref to flags disabled by
-flive-patching.
* opts.c (control_options_for_live_patching): Disable ipa-modref.
2020-09-25 Jan Hubicka <hubicka@ucw.cz>
* ipa-modref.c (analyze_stmt): Fix return value for gimple_clobber.
2020-09-25 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/aarch64/aarch64-option-extensions.def (rng): Add
cpuinfo string.
2020-09-25 Alex Coplan <alex.coplan@arm.com>
* config/arm/arm-cpus.in (neoverse-v1): Add FP16.
2020-09-25 Martin Liska <mliska@suse.cz>
PR gcov-profile/64636
* value-prof.c (stream_out_histogram_value): Allow negative
values for HIST_TYPE_IOR.
2020-09-25 Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.c (nvptx_assemble_integer, nvptx_print_operand):
Use gcc_fallthrough ().
2020-09-25 Richard Biener <rguenther@suse.de>
PR middle-end/96814
* expr.c (store_constructor): Handle VECTOR_BOOLEAN_TYPE_P
CTORs correctly.
2020-09-25 Richard Biener <rguenther@suse.de>
PR middle-end/97207
* vec.h (auto_vec<T>::operator=(auto_vec<T>&&)): Implement.
2020-09-25 Richard Sandiford <richard.sandiford@arm.com>
* config/arm/arm-protos.h (arm_mve_mode_and_operands_type_check):
Delete.
* config/arm/arm.c (arm_coproc_mem_operand_wb): Use a scale factor
of 2 rather than 4 for 16-bit modes.
(arm_mve_mode_and_operands_type_check): Delete.
* config/arm/constraints.md (Uj): Allow writeback for Neon,
but continue to disallow it for MVE.
* config/arm/arm.md (*arm32_mov<HFBF:mode>): Add !TARGET_HAVE_MVE.
* config/arm/vfp.md (*mov_load_vfp_hf16, *mov_store_vfp_hf16): Fold
back into...
(*mov<mode>_vfp_<mode>16): ...here but use Uj for the FPR memory
constraints. Use for base MVE too.
2020-09-25 Richard Biener <rguenther@suse.de>
PR tree-optimization/97199
* tree-if-conv.c (combine_blocks): Remove edges only
after looking at virtual PHI args.
2020-09-25 Jakub Jelinek <jakub@redhat.com>
* omp-low.c (scan_omp_1_stmt): Don't call scan_omp_simd for
collapse > 1 loops as simt doesn't support collapsed loops yet.
* omp-expand.c (expand_omp_for_init_counts, expand_omp_for_init_vars):
Small tweaks to function comment.
(expand_omp_simd): Rewritten collapse > 1 support to only attempt
to vectorize the innermost loop and emit set of outer loops around it.
For non-composite simd with collapse > 1 without broken loop don't
even try to compute number of iterations first. Add support for
non-rectangular simd loops.
(expand_omp_for): Don't sorry_at on non-rectangular simd loops.
2020-09-25 Martin Liska <mliska@suse.cz>
* cgraph.c (cgraph_edge::debug): New.
* cgraph.h (cgraph_edge::debug): New.
2020-09-25 Martin Liska <mliska@suse.cz>
* cgraph.c (cgraph_node::dump): Always print space at the end
of a message. Remove one extra space.
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/arm/arm-cpus.in (neoverse-n2): New.
* config/arm/arm-tables.opt: Regenerate.
* config/arm/arm-tune.md: Regenerate.
* doc/invoke.texi: Document support for Neoverse N2.
2020-09-24 Alex Coplan <alex.coplan@arm.com>
* config/aarch64/aarch64-cores.def: Add Neoverse N2.
* config/aarch64/aarch64-tune.md: Regenerate.
* doc/invoke.texi: Document AArch64 support for Neoverse N2.
2020-09-24 Richard Biener <rguenther@suse.de>
* vec.h (auto_vec<T, 0>::auto_vec (auto_vec &&)): New move CTOR.
(auto_vec<T, 0>::operator=(auto_vec &&)): Delete.
* hash-table.h (hash_table::expand): Use std::move when expanding.
* cfgloop.h (get_loop_exit_edges): Return auto_vec<edge>.
* cfgloop.c (get_loop_exit_edges): Adjust.
* cfgloopmanip.c (fix_loop_placement): Likewise.
* ipa-fnsummary.c (analyze_function_body): Likewise.
* ira-build.c (create_loop_tree_nodes): Likewise.
(create_loop_tree_node_allocnos): Likewise.
(loop_with_complex_edge_p): Likewise.
* ira-color.c (ira_loop_edge_freq): Likewise.
* loop-unroll.c (analyze_insns_in_loop): Likewise.
* predict.c (predict_loops): Likewise.
* tree-predcom.c (last_always_executed_block): Likewise.
* tree-ssa-loop-ch.c (ch_base::copy_headers): Likewise.
* tree-ssa-loop-im.c (store_motion_loop): Likewise.
* tree-ssa-loop-ivcanon.c (loop_edge_to_cancel): Likewise.
(canonicalize_loop_induction_variables): Likewise.
* tree-ssa-loop-manip.c (get_loops_exits): Likewise.
* tree-ssa-loop-niter.c (find_loop_niter): Likewise.
(finite_loop_p): Likewise.
(find_loop_niter_by_eval): Likewise.
(estimate_numbers_of_iterations): Likewise.
* tree-ssa-loop-prefetch.c (emit_mfence_after_loop): Likewise.
(may_use_storent_in_loop_p): Likewise.
2020-09-24 Jan Hubicka <jh@suse.cz>
* doc/invoke.texi: Document -fipa-modref, ipa-modref-max-bases,
ipa-modref-max-refs, ipa-modref-max-accesses, ipa-modref-max-tests.
* ipa-modref-tree.c (test_insert_search_collapse): Update.
(test_merge): Update.
(gt_ggc_mx): New function.
* ipa-modref-tree.h (struct modref_access_node): New structure.
(struct modref_ref_node): Add every_access and accesses array.
(modref_ref_node::modref_ref_node): Update ctor.
(modref_ref_node::search): New member function.
(modref_ref_node::collapse): New member function.
(modref_ref_node::insert_access): New member function.
(modref_base_node::insert_ref): Do not collapse base if ref is 0.
(modref_base_node::collapse): Copllapse also refs.
(modref_tree): Add accesses.
(modref_tree::modref_tree): Initialize max_accesses.
(modref_tree::insert): Add access parameter.
(modref_tree::cleanup): New member function.
(modref_tree::merge): Add parm_map; merge accesses.
(modref_tree::copy_from): New member function.
(modref_tree::create_ggc): Add max_accesses.
* ipa-modref.c (dump_access): New function.
(dump_records): Dump accesses.
(dump_lto_records): Dump accesses.
(get_access): New function.
(record_access): Record access.
(record_access_lto): Record access.
(analyze_call): Compute parm_map.
(analyze_function): Update construction of modref records.
(modref_summaries::duplicate): Likewise; use copy_from.
(write_modref_records): Stream accesses.
(read_modref_records): Sream accesses.
(pass_ipa_modref::execute): Update call of merge.
* params.opt (-param=modref-max-accesses): New.
* tree-ssa-alias.c (alias_stats): Add modref_baseptr_tests.
(dump_alias_stats): Update.
(base_may_alias_with_dereference_p): New function.
(modref_may_conflict): Check accesses.
(ref_maybe_used_by_call_p_1): Update call to modref_may_conflict.
(call_may_clobber_ref_p_1): Update call to modref_may_conflict.
2020-09-24 Richard Sandiford <richard.sandiford@arm.com>
* config/arm/arm.md (*stack_protect_combined_set_insn): For non-PIC,
load the address of the canary rather than the address of the
constant pool entry that points to it.
(*stack_protect_combined_test_insn): Likewise.
2020-09-24 Richard Biener <rguenther@suse.de>
PR tree-optimization/97085
* match.pd (mask ? { false,..} : { true, ..} -> ~mask): New.
2020-09-24 Jan Hubicka <hubicka@ucw.cz>
* ipa-modref-tree.h (modref_base::collapse): Release memory.
(modref_tree::create_ggc): New member function.
(modref_tree::colapse): Release memory.
(modref_tree::~modref_tree): New destructor.
* ipa-modref.c (modref_summaries::create_ggc): New function.
(analyze_function): Use create_ggc.
(modref_summaries::duplicate): Likewise.
(read_modref_records): Likewise.
(modref_read): Likewise.
2020-09-24 Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.c (rs6000_rtx_costs): Pass mode to
reg_or_add_cint_operand and reg_or_sub_cint_operand.
2020-09-24 Alan Modra <amodra@gmail.com>
PR target/93012
* config/rs6000/rs6000.c (num_insns_constant_gpr): Count rldimi
constants correctly.
2020-09-24 Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000-c.c (rs6000_target_modify_macros):
Conditionally define __PCREL__.
2020-09-24 Alan Modra <amodra@gmail.com>
PR target/97107
* config/rs6000/rs6000-internal.h (struct rs6000_stack): Improve
calls_p comment.
* config/rs6000/rs6000-logue.c (rs6000_stack_info): Likewise.
(rs6000_expand_split_stack_prologue): Emit the prologue for
functions that make a sibling call.
2020-09-24 David Malcolm <dmalcolm@redhat.com>
* doc/analyzer.texi (Analyzer Paths): Add note about
-fno-analyzer-feasibility.
* doc/invoke.texi (Static Analyzer Options): Add
-fno-analyzer-feasibility.
2020-09-24 Paul A. Clarke <pc@us.ibm.com>
* doc/extend.texi: Add 'd' for doubleword variant of
vector insert instruction.
2020-09-23 Martin Sebor <msebor@redhat.com>
* gimple-array-bounds.cc (build_zero_elt_array_type): New function.
(array_bounds_checker::check_mem_ref): Call it.
2020-09-23 Martin Sebor <msebor@redhat.com>
PR middle-end/97175
* builtins.c (maybe_warn_for_bound): Handle both DECLs and EXPRESSIONs
in pad->dst.ref, same is pad->src.ref.
2020-09-23 Jan Hubicka <jh@suse.cz>
* ipa-fnsummary.c (refs_local_or_readonly_memory_p): New function.
(points_to_local_or_readonly_memory_p): New function.
* ipa-fnsummary.h (refs_local_or_readonly_memory_p): Declare.
(points_to_local_or_readonly_memory_p): Declare.
* ipa-modref.c (record_access_p): Use refs_local_or_readonly_memory_p.
* ipa-pure-const.c (check_op): Likewise.
2020-09-23 Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.md: Don't allow operand containing sum of
function ref and const.
2020-09-23 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64-protos.h (aarch64_salt_type): New enum.
(aarch64_stack_protect_canary_mem): Declare.
* config/aarch64/aarch64.md (UNSPEC_SALT_ADDR): New unspec.
(stack_protect_set): Forward to stack_protect_combined_set.
(stack_protect_combined_set): New pattern. Use
aarch64_stack_protect_canary_mem.
(reg_stack_protect_address_<mode>): Add a salt operand.
(stack_protect_test): Forward to stack_protect_combined_test.
(stack_protect_combined_test): New pattern. Use
aarch64_stack_protect_canary_mem.
* config/aarch64/aarch64.c (strip_salt): New function.
(strip_offset_and_salt): Likewise.
(tls_symbolic_operand_type): Use strip_offset_and_salt.
(aarch64_stack_protect_canary_mem): New function.
(aarch64_cannot_force_const_mem): Use strip_offset_and_salt.
(aarch64_classify_address): Likewise.
(aarch64_symbolic_address_p): Likewise.
(aarch64_print_operand): Likewise.
(aarch64_output_addr_const_extra): New function.
(aarch64_tls_symbol_p): Use strip_salt.
(aarch64_classify_symbol): Likewise.
(aarch64_legitimate_pic_operand_p): Use strip_offset_and_salt.
(aarch64_legitimate_constant_p): Likewise.
(aarch64_mov_operand_p): Use strip_salt.
(TARGET_ASM_OUTPUT_ADDR_CONST_EXTRA): Override.
2020-09-23 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/71233
* config/aarch64/arm_neon.h (vreinterpretq_f64_p128,
vreinterpretq_p128_f64): Define.
2020-09-23 Alex Coplan <alex.coplan@arm.com>
* config/arm/arm-cpus.in (neoverse-v1): New.
* config/arm/arm-tables.opt: Regenerate.
* config/arm/arm-tune.md: Regenerate.
* doc/invoke.texi: Document support for Neoverse V1.
2020-09-23 Alex Coplan <alex.coplan@arm.com>
* config/aarch64/aarch64-cores.def: Add Neoverse V1.
* config/aarch64/aarch64-tune.md: Regenerate.
* doc/invoke.texi: Document support for Neoverse V1.
2020-09-23 Richard Biener <rguenther@suse.de>
PR middle-end/96453
* gimple-isel.cc (gimple_expand_vec_cond_expr): Remove
LT_EXPR -> NE_EXPR verification and also apply it for
non-constant masks.
2020-09-23 Jan Hubicka <hubicka@ucw.cz>
* ipa-modref.c (modref_summary::lto_useful_p): New member function.
(modref_summary::useful_p): New member function.
(analyze_function): Drop useless summaries.
(modref_write): Skip useless summaries.
(pass_ipa_modref::execute): Drop useless summaries.
* ipa-modref.h (struct GTY): Declare useful_p and lto_useful_p.
* tree-ssa-alias.c (dump_alias_stats): Fix.
(modref_may_conflict): Fix stats.
2020-09-23 Richard Biener <rguenther@suse.de>
PR middle-end/96466
* internal-fn.c (expand_vect_cond_mask_optab_fn): Use
appropriate mode for force_reg.
* tree.c (build_truth_vector_type_for): Pass VOIDmode to
make_vector_type.
2020-09-23 Richard Sandiford <richard.sandiford@arm.com>
* tree-vectorizer.h (determine_peel_for_niter): Delete in favor of...
(vect_determine_partial_vectors_and_peeling): ...this new function.
* tree-vect-loop-manip.c (vect_update_epilogue_niters): New function.
Reject using vector epilogue loops for single iterations. Install
the constant number of epilogue loop iterations in the associated
loop_vinfo. Rely on vect_determine_partial_vectors_and_peeling
to do the main part of the test.
(vect_do_peeling): Use vect_update_epilogue_niters to handle
epilogue loops with a known number of iterations. Skip recomputing
the number of iterations later in that case. Otherwise, use
vect_determine_partial_vectors_and_peeling to decide whether the
epilogue loop needs to use partial vectors or peeling.
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Set the
default can_use_partial_vectors_p to false if partial-vector-usage=0.
(determine_peel_for_niter): Remove in favor of...
(vect_determine_partial_vectors_and_peeling): ...this new function,
split out from...
(vect_analyze_loop_2): ...here. Reflect the vect_verify_full_masking
and vect_verify_loop_lens results in CAN_USE_PARTIAL_VECTORS_P
rather than USING_PARTIAL_VECTORS_P.
2020-09-23 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/71233
* config/aarch64/aarch64-simd-builtins.def (frintn): Use BUILTIN_VHSDF_HSDF
for modes. Remove explicit hf instantiation.
* config/aarch64/arm_neon.h (vrndns_f32): Define.
2020-09-23 Richard Biener <rguenther@suse.de>
PR tree-optimization/97173
* tree-vect-loop.c (vectorizable_live_operation): Extend
assert to also conver element conversions.
2020-09-23 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/71233
* config/aarch64/arm_neon.h (vtrn1q_p64, vtrn2q_p64, vuzp1q_p64,
vuzp2q_p64, vzip1q_p64, vzip2q_p64): Define.
2020-09-23 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/71233
* config/aarch64/arm_neon.h (vldrq_p128): Define.
2020-09-23 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/71233
* config/aarch64/arm_neon.h (vstrq_p128): Define.
2020-09-23 Richard Biener <rguenther@suse.de>
PR tree-optimization/97151
* tree-ssa-structalias.c (find_func_aliases_for_call):
DECL_IS_REPLACEABLE_OPERATOR_DELETE_P has no effect on
arguments.
2020-09-23 Richard Biener <rguenther@suse.de>
PR middle-end/97162
* alias.c (compare_base_decls): Use DECL_HARD_REGISTER
and guard with VAR_P.
2020-09-23 Martin Liska <mliska@suse.cz>
PR gcov-profile/97069
* profile.c (branch_prob): Line number must be at least 1.
2020-09-23 Tom de Vries <tdevries@suse.de>
PR target/97158
* config/nvptx/nvptx.c (nvptx_output_mov_insn): Handle move from
DF subreg to DF reg.
2020-09-23 David Malcolm <dmalcolm@redhat.com>
* Makefile.in: Add $(ZLIBINC) to CFLAGS-analyzer/engine.o.
2020-09-22 Jan Hubicka <jh@suse.cz>
* ipa-modref.c (analyze_stmt): Ignore gimple clobber.
2020-09-22 Jan Hubicka <jh@suse.cz>
* ipa-modref-tree.c: Add namespace selftest.
(modref_tree_c_tests): Rename to ...
(ipa_modref_tree_c_tests): ... this.
* ipa-modref.c (pass_modref): Remove destructor.
(ipa_modref_c_finalize): New function.
* ipa-modref.h (ipa_modref_c_finalize): Declare.
* selftest-run-tests.c (selftest::run_tests): Call
ipa_modref_c_finalize.
* selftest.h (ipa_modref_tree_c_tests): Declare.
* toplev.c: Include ipa-modref-tree.h and ipa-modref.h
(toplev::finalize): Call ipa_modref_c_finalize.
2020-09-22 David Malcolm <dmalcolm@redhat.com>
* doc/analyzer.texi (Other Debugging Techniques): Mention
-fdump-analyzer-json.
* doc/invoke.texi (Static Analyzer Options): Add
-fdump-analyzer-json.
2020-09-22 David Faust <david.faust@oracle.com>
* config/bpf/bpf.md: Add defines for signed div and mod operators.
2020-09-22 Martin Liska <mliska@suse.cz>
PR tree-optimization/96979
* doc/invoke.texi: Document new param max-switch-clustering-attempts.
* params.opt: Add new parameter.
* tree-switch-conversion.c (jump_table_cluster::find_jump_tables):
Limit number of attempts.
(bit_test_cluster::find_bit_tests): Likewise.
2020-09-22 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
* config/s390/s390.md ("*cmp<mode>_ccs_0", "*cmp<mode>_ccz_0",
"*cmp<mode>_ccs_0_fastmath"): Basically change "*cmp<mode>_ccs_0" into
"*cmp<mode>_ccz_0" and for fast math add "*cmp<mode>_ccs_0_fastmath".
2020-09-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/71233
* config/aarch64/arm_neon.h (vcls_u8, vcls_u16, vcls_u32,
vclsq_u8, vclsq_u16, vclsq_u32): Define.
2020-09-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/71233
* config/aarch64/arm_neon.h (vceqq_p64, vceqz_p64, vceqzq_p64): Define.
2020-09-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR target/71233
* config/aarch64/arm_neon.h (vadd_p8, vadd_p16, vadd_p64, vaddq_p8,
vaddq_p16, vaddq_p64, vaddq_p128): Define.
2020-09-22 Jakub Jelinek <jakub@redhat.com>
* params.opt (--param=modref-max-tests=): Fix typo in help text:
perofmed -> performed.
* common.opt: Fix typo: incrmeental -> incremental.
* ipa-modref.c: Fix typos: recroding -> recording, becaue -> because,
analsis -> analysis.
(class modref_summaries): Fix typo: betweehn -> between.
(analyze_call): Fix typo: calle -> callee.
(read_modref_records): Fix typo: expcted -> expected.
(pass_ipa_modref::execute): Fix typo: calle -> callee.
2020-09-22 Jakub Jelinek <jakub@redhat.com>
* common.opt (-fipa-modref): Add dot at the end of option help.
* params.opt (--param=modref-max-tests=): Likewise.
2020-09-21 Marek Polacek <polacek@redhat.com>
* doc/invoke.texi: Document -Wctad-maybe-unsupported.
2020-09-21 Richard Biener <rguenther@suse.de>
PR tree-optimization/97139
* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): Only mark the
pattern root, track visited vectorized stmts.
2020-09-21 Jakub Jelinek <jakub@redhat.com>
* configure.ac: Use mallinfo mallinfo2 as first operand of
gcc_AC_CHECK_DECLS rather than [mallinfo, mallinfo2].
* configure: Regenerated.
* config.in: Regenerated.
2020-09-21 Andrea Corallo <andrea.corallo@arm.com>
* config/aarch64/aarch64-builtins.c
(aarch64_general_expand_builtin): Use expand machinery not to
alter the value of an rtx returned by force_reg.
2020-09-21 Richard Biener <rguenther@suse.de>
PR tree-optimization/97135
* tree-ssa-loop-im.c (sm_seq_push_down): Do not ignore
self-dependences.
2020-09-21 Martin Liska <mliska@suse.cz>
PR tree-optimization/96915
* tree-switch-conversion.c (switch_conversion::expand): Accept
also integer constants.
2020-09-21 Martin Liska <mliska@suse.cz>
* print-tree.c (print_node): Remove extra space.
2020-09-21 Andrea Corallo <andrea.corallo@arm.com>
PR target/96968
* config/aarch64/aarch64-builtins.c
(aarch64_expand_fpsr_fpcr_setter): Fix comment nit.
(aarch64_expand_fpsr_fpcr_getter): New function, expand these
getters using expand_insn machinery.
(aarch64_general_expand_builtin): Make use of.
2020-09-21 Martin Liska <mliska@suse.cz>
* ggc-common.c (ggc_rlimit_bound): Use ONE_? macro.
(ggc_min_expand_heuristic): Likewise.
(ggc_min_heapsize_heuristic): Likewise.
* ggc-page.c (ggc_collect): Likewise.
* system.h (ONE_G): Likewise.
2020-09-21 Martin Liska <mliska@suse.cz>
* ggc-common.c (ggc_prune_overhead_list): Use SIZE_AMOUNT.
* ggc-page.c (release_pages): Likewise.
(ggc_collect): Likewise.
(ggc_trim): Likewise.
(ggc_grow): Likewise.
* timevar.c (timer::print): Likewise.
2020-09-21 Martin Liska <mliska@suse.cz>
* config.in: Regenerate.
* configure: Likewise.
* configure.ac: Detect for mallinfo2.
* ggc-common.c (defined): Use it.
* system.h: Handle also HAVE_MALLINFO2.
2020-09-20 John David Anglin < danglin@gcc.gnu.org>
* config/pa/pa-hpux11.h (LINK_GCC_C_SEQUENCE_SPEC): Delete.
* config/pa/pa64-hpux.h (LINK_GCC_C_SEQUENCE_SPEC): Likewise.
(ENDFILE_SPEC): Link with libgcc_stub.a and mill.a.
* config/pa/pa32-linux.h (ENDFILE_SPEC): Link with libgcc.a.
2020-09-20 Jan Hubicka <hubicka@ucw.cz>
* ipa-modref.c (dump_lto_records): Fix ICE.
2020-09-20 David Cepelik <d@dcepelik.cz>
Jan Hubicka <hubicka@ucw.cz>
* Makefile.in: Add ipa-modref.c and ipa-modref-tree.c.
* alias.c: (reference_alias_ptr_type_1): Export.
* alias.h (reference_alias_ptr_type_1): Declare.
* common.opt (fipa-modref): New.
* gengtype.c (open_base_files): Add ipa-modref-tree.h and ipa-modref.h
* ipa-modref-tree.c: New file.
* ipa-modref-tree.h: New file.
* ipa-modref.c: New file.
* ipa-modref.h: New file.
* lto-section-in.c (lto_section_name): Add ipa_modref.
* lto-streamer.h (enum lto_section_type): Add LTO_section_ipa_modref.
* opts.c (default_options_table): Enable ipa-modref at -O1+.
* params.opt (-param=modref-max-bases, -param=modref-max-refs,
-param=modref-max-tests): New params.
* passes.def: Schedule pass_modref and pass_ipa_modref.
* timevar.def (TV_IPA_MODREF): New timevar.
(TV_TREE_MODREF): New timevar.
* tree-pass.h (make_pass_modref): Declare.
(make_pass_ipa_modref): Declare.
* tree-ssa-alias.c (dump_alias_stats): Include ipa-modref-tree.h
and ipa-modref.h
(alias_stats): Add modref_use_may_alias, modref_use_no_alias,
modref_clobber_may_alias, modref_clobber_no_alias, modref_tests.
(dump_alias_stats): Dump new stats.
(nonoverlapping_array_refs_p): Fix formating.
(modref_may_conflict): New function.
(ref_maybe_used_by_call_p_1): Use it.
(call_may_clobber_ref_p_1): Use it.
(call_may_clobber_ref_p): Update.
(stmt_may_clobber_ref_p_1): Update.
* tree-ssa-alias.h (call_may_clobber_ref_p_1): Update.
2020-09-19 Martin Sebor <msebor@redhat.com>
PR middle-end/82608
PR middle-end/94195
PR c/50584
PR middle-end/84051
* gimple-array-bounds.cc (get_base_decl): New function.
(get_ref_size): New function.
(trailing_array): New function.
(array_bounds_checker::check_array_ref): Call them. Handle arrays
declared in function parameters.
(array_bounds_checker::check_mem_ref): Same. Handle references to
dynamically allocated arrays.
2020-09-19 Martin Sebor <msebor@redhat.com>
PR c/50584
* builtins.c (warn_for_access): Add argument. Distinguish between
reads and writes.
(check_access): Add argument. Distinguish between reads and writes.
(gimple_call_alloc_size): Set range even on failure.
(gimple_parm_array_size): New function.
(compute_objsize): Call it.
(check_memop_access): Pass check_access an additional argument.
(expand_builtin_memchr, expand_builtin_strcat): Same.
(expand_builtin_strcpy, expand_builtin_stpcpy_1): Same.
(expand_builtin_stpncpy, check_strncat_sizes): Same.
(expand_builtin_strncat, expand_builtin_strncpy): Same.
(expand_builtin_memcmp): Same.
* builtins.h (compute_objsize): Declare a new overload.
(gimple_parm_array_size): Declare.
(check_access): Add argument.
* calls.c (append_attrname): Simplify.
(maybe_warn_rdwr_sizes): Handle internal attribute access.
* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Avoid adding
quotes.
2020-09-19 Martin Sebor <msebor@redhat.com>
* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Handle attribute
access internal representation of arrays.
2020-09-19 Martin Sebor <msebor@redhat.com>
PR c/50584
* attribs.c (decl_attributes): Also pass decl along with type
attributes to handlers.
(init_attr_rdwr_indices): Change second argument to attribute chain.
Handle internal attribute representation in addition to external.
(get_parm_access): New function.
(attr_access::to_internal_string): Define new member function.
(attr_access::to_external_string): Define new member function.
(attr_access::vla_bounds): Define new member function.
* attribs.h (struct attr_access): Declare new members.
(attr_access::from_mode_char): Define new member function.
(get_parm_access): Declare new function.
* calls.c (initialize_argument_information): Pass function type
attributes to init_attr_rdwr_indices.
* doc/invoke.texi (-Warray-parameter, -Wvla-parameter): Document.
* tree-pretty-print.c (dump_generic_node): Correct handling of
qualifiers.
* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Same.
* tree.h (access_mode): Add new enumerator.
2020-09-19 Sandra Loosemore <sandra@codesourcery.com>
* doc/generic.texi (Basic Statements): Document SWITCH_EXPR here,
not SWITCH_STMT.
(Statements for C and C++): Rename node to reflect what
the introduction already says about sharing between C and C++
front ends. Copy-edit and correct documentation for structured
loops and switch.
2020-09-19 liuhongt <hongtao.liu@intel.com>
PR target/96861
* config/i386/x86-tune-costs.h (skylake_cost): increase rtx
cost of sse_to_integer from 2 to 6.
2020-09-18 Sudi Das <sudi.das@arm.com>
Omar Tahir <omar.tahir@arm.com>
* config/arm/thumb2.md (*thumb2_csneg): New.
(*thumb2_negscc): Don't match if TARGET_COND_ARITH.
* config/arm/arm.md (*if_neg_move): Don't match if TARGET_COND_ARITH.
2020-09-18 Sudi Das <sudi.das@arm.com>
Omar Tahir <omar.tahir@arm.com>
* config/arm/thumb2.md (*thumb2_csinc): New.
(*thumb2_cond_arith): Generate CINC where possible.
2020-09-18 Sudi Das <sudi.das@arm.com>
Omar Tahir <omar.tahir@arm.com>
* config/arm/arm.h (TARGET_COND_ARITH): New macro.
* config/arm/arm.c (arm_have_conditional_execution): Return false if
TARGET_COND_ARITH before reload.
* config/arm/predicates.md (arm_comparison_operation): Returns true if
comparing CC_REGNUM with constant zero.
* config/arm/thumb2.md (*thumb2_csinv): New.
(*thumb2_movcond): Don't match if TARGET_COND_ARITH.
2020-09-18 Richard Sandiford <richard.sandiford@arm.com>
PR middle-end/91957
* ira.c (ira_setup_eliminable_regset): Skip the special elimination
handling of the hard frame pointer if the hard frame pointer is fixed.
2020-09-18 Richard Biener <rguenther@suse.de>
PR tree-optimization/97081
* tree-vect-patterns.c (vect_recog_rotate_pattern): Use the
precision of the shifted operand to determine the mask.
2020-09-18 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_print_operand): Update comment.
Cast to long when printing values formatted as long.
Support 'd', 'e', 'f' and 'g' modifiers.
Extract operand value with a single operation for all modifiers.
* doc/extend.texi (msp430Operandmodifiers): New.
2020-09-18 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (increment_stack): Mark insns which increment
the stack as frame_related.
(msp430_expand_prologue): Add comments.
(msp430_expand_epilogue): Mark insns which decrement
the stack as frame_related.
Add reg_note to stack pop insns describing position of register
variables on the stack.
2020-09-18 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn-tree.c (execute_omp_gcn): Delete.
(make_pass_omp_gcn): Delete.
* config/gcn/t-gcn-hsa (PASSES_EXTRA): Delete.
* config/gcn/gcn-passes.def: Removed.
2020-09-18 Alex Coplan <alex.coplan@arm.com>
* cfgloop.h (nb_iter_bound): Reword comment describing is_exit.
2020-09-18 Richard Biener <rguenther@suse.de>
PR tree-optimization/97095
* tree-vect-loop.c (vectorizable_live_operation): Get
the SLP vector type from the correct object.
2020-09-18 Richard Biener <rguenther@suse.de>
PR tree-optimization/97089
* tree-ssa-sccvn.c (visit_nary_op): Do not replace unsigned
divisions.
2020-09-18 Richard Biener <rguenther@suse.de>
PR tree-optimization/97098
* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): Do not
recurse to children when all stmts were already visited.
2020-09-17 Sergei Trofimovich <siarheit@google.com>
* profile.c (sort_hist_values): Clarify hist format:
start with a value, not counter.
2020-09-17 Yeting Kuo <fakepaper56@gmail.com>
* config/riscv/riscv.h (CSW_MAX_OFFSET): Fix typo.
2020-09-17 Patrick Palka <ppalka@redhat.com>
PR c/80076
* gensupport.c (alter_attrs_for_subst_insn) <case SET_ATTR>:
Reduce indentation of misleadingly indented code fragment.
* lra-constraints.c (multi_block_pseudo_p): Likewise.
* sel-sched-ir.c (merge_fences): Likewise.
2020-09-17 Martin Sebor <msebor@redhat.com>
* doc/invoke.texi (-Wuninitialized): Document -Wuninitialized for
allocated objects.
(-Wmaybe-uninitialized): Same.
2020-09-17 Richard Biener <rguenther@suse.de>
* tree-ssa-sccvn.c (visit_nary_op): Value-number multiplications
and divisions to negates of available negated forms.
2020-09-17 Eric Botcazou <ebotcazou@adacore.com>
PR middle-end/97078
* function.c (use_register_for_decl): Test cfun->tail_call_marked
for a parameter here instead of...
(assign_parm_setup_reg): ...here.
2020-09-17 Aldy Hernandez <aldyh@redhat.com>
* range-op.cc (multi_precision_range_tests): Normalize symbolics when copying to a
multi-range.
* value-range.cc (irange::copy_legacy_range): Add test.
2020-09-17 Jan Hubicka <jh@suse.cz>
* cgraph.c (cgraph_node::get_availability): Fix availability of
functions in other partitions
* varpool.c (varpool_node::get_availability): Likewise.
2020-09-17 Jojo R <jiejie_rong@c-sky.com>
* config/csky/csky.opt (msim): New.
* doc/invoke.texi (C-SKY Options): Document -msim.
* config/csky/csky-elf.h (LIB_SPEC): Add simulator runtime.
2020-09-17 Sergei Trofimovich <siarheit@google.com>
* doc/cppenv.texi: Use @code{} instead of @samp{@command{}}
around 'date %s'.
2020-09-17 liuhongt <hongtao.liu@intel.com>
* common/config/i386/i386-common.c
(OPTION_MASK_ISA_AVX_UNSET): Remove OPTION_MASK_ISA_XSAVE_UNSET.
(OPTION_MASK_ISA_XSAVE_UNSET): Add OPTION_MASK_ISA_AVX_UNSET.
2020-09-16 Alexandre Oliva <oliva@adacore.com>
* config/rs6000/rs6000.c (have_compare_and_set_mask): Use
E_*mode in cases.
2020-09-16 Bill Schmidt <wschmidt@linux.ibm.com>
* config/rs6000/predicates.md (current_file_function_operand):
Remove argument from rs6000_pcrel_p call.
* config/rs6000/rs6000-logue.c (rs6000_decl_ok_for_sibcall):
Likewise.
(rs6000_global_entry_point_prologue_needed_p): Likewise.
(rs6000_output_function_prologue): Likewise.
* config/rs6000/rs6000-protos.h (rs6000_function_pcrel_p): New
prototype.
(rs6000_pcrel_p): Remove argument.
* config/rs6000/rs6000.c (rs6000_legitimize_tls_address): Remove
argument from rs6000_pcrel_p call.
(rs6000_call_template_1): Likewise.
(rs6000_indirect_call_template_1): Likewise.
(rs6000_longcall_ref): Likewise.
(rs6000_call_aix): Likewise.
(rs6000_sibcall_aix): Likewise.
(rs6000_function_pcrel_p): Rename from rs6000_pcrel_p.
(rs6000_pcrel_p): Rewrite.
* config/rs6000/rs6000.md (*pltseq_plt_pcrel<mode>): Remove
argument from rs6000_pcrel_p call.
(*call_local<mode>): Likewise.
(*call_value_local<mode>): Likewise.
(*call_nonlocal_aix<mode>): Likewise.
(*call_value_nonlocal_aix<mode>): Likewise.
(*call_indirect_pcrel<mode>): Likewise.
(*call_value_indirect_pcrel<mode>): Likewise.
2020-09-16 Marek Polacek <polacek@redhat.com>
PR preprocessor/96935
* input.c (get_substring_ranges_for_loc): Return if start.column
is less than 1.
2020-09-16 Martin Sebor <msebor@redhat.com>
PR middle-end/96295
* tree-ssa-uninit.c (maybe_warn_operand): Work harder to avoid
warning for objects of empty structs
2020-09-16 Eric Botcazou <ebotcazou@adacore.com>
* tree-eh.c (lower_try_finally_dup_block): Backward propagate slocs
to stack restore builtin calls.
(cleanup_all_empty_eh): Do again a post-order traversal of the EH
region tree.
2020-09-16 Andrea Corallo <andrea.corallo@arm.com>
* tree-vect-loop.c (vect_need_peeling_or_partial_vectors_p): New
function.
(vect_analyze_loop_2): Make use of it not to select partial
vectors if no peel is required.
(determine_peel_for_niter): Move out some logic into
'vect_need_peeling_or_partial_vectors_p'.
2020-09-16 H.J. Lu <hjl.tools@gmail.com>
PR target/97032
* cfgexpand.c (asm_clobber_reg_kind): Set sp_is_clobbered_by_asm
to true if the stack pointer is clobbered by asm statement.
* emit-rtl.h (rtl_data): Add sp_is_clobbered_by_asm.
* config/i386/i386.c (ix86_get_drap_rtx): Set need_drap to true
if the stack pointer is clobbered by asm statement.
2020-09-16 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/vector.md(*vec_tf_to_v1tf): Use "f" instead of "v"
for the source operand.
2020-09-16 Jojo R <jiejie_rong@c-sky.com>
* config.gcc (C-SKY): Set use_gcc_stdint=wrap for elf target.
2020-09-16 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (_stmt_vec_info::num_slp_uses): Remove.
(STMT_VINFO_NUM_SLP_USES): Likewise.
(vect_free_slp_instance): Adjust.
(vect_update_shared_vectype): Declare.
* tree-vectorizer.c (vec_info::~vec_info): Adjust.
* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
(vectorizable_live_operation): Use vector type from
SLP_TREE_REPRESENTATIVE.
(vect_transform_loop): Adjust.
* tree-vect-data-refs.c (vect_slp_analyze_node_alignment):
Set the shared vector type.
* tree-vect-slp.c (vect_free_slp_tree): Remove final_p
parameter, remove STMT_VINFO_NUM_SLP_USES updating.
(vect_free_slp_instance): Adjust.
(vect_create_new_slp_node): Remove STMT_VINFO_NUM_SLP_USES
updating.
(vect_update_shared_vectype): Always compare with the
present vector type, update if NULL.
(vect_build_slp_tree_1): Do not update the shared vector
type here.
(vect_build_slp_tree_2): Adjust.
(slp_copy_subtree): Likewise.
(vect_attempt_slp_rearrange_stmts): Likewise.
(vect_analyze_slp_instance): Likewise.
(vect_analyze_slp): Likewise.
(vect_slp_analyze_node_operations_1): Update the shared
vector type.
(vect_slp_analyze_operations): Adjust.
(vect_slp_analyze_bb_1): Likewise.
2020-09-16 Jojo R <jiejie_rong@c-sky.com>
* config/csky/t-csky-linux (CSKY_MULTILIB_OSDIRNAMES): Use mfloat-abi.
(MULTILIB_OPTIONS): Likewise.
* config/csky/t-csky-elf (MULTILIB_OPTIONS): Likewise.
(MULTILIB_EXCEPTIONS): Likewise.
2020-09-16 Jakub Jelinek <jakub@redhat.com>
* config/arm/arm.c (arm_option_restore): Comment out opts argument
name to avoid unused parameter warnings.
2020-09-16 Jakub Jelinek <jakub@redhat.com>
* optc-save-gen.awk: In cl_optimization_stream_out use
bp_pack_var_len_{int,unsigned} instead of bp_pack_value. In
cl_optimization_stream_in use bp_unpack_var_len_{int,unsigned}
instead of bp_unpack_value. Formatting fix.
2020-09-16 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/97053
* gimple-ssa-store-merging.c (check_no_overlap): Add FIRST_ORDER,
START, FIRST_EARLIER and LAST_EARLIER arguments. Return false if
any stores between FIRST_EARLIER inclusive and LAST_EARLIER exclusive
has order in between FIRST_ORDER and LAST_ORDER and overlaps the to
be merged store.
(imm_store_chain_info::try_coalesce_bswap): Add FIRST_EARLIER argument.
Adjust check_no_overlap caller.
(imm_store_chain_info::coalesce_immediate_stores): Add first_earlier
and last_earlier variables, adjust them during iterations. Adjust
check_no_overlap callers, call check_no_overlap even when extending
overlapping stores by extra INTEGER_CST stores.
2020-09-16 Jojo R <jiejie_rong@c-sky.com>
* config/csky/csky-linux-elf.h (GLIBC_DYNAMIC_LINKER): Use mfloat-abi.
2020-09-16 Kewen Lin <linkw@linux.ibm.com>
PR target/97019
* config/rs6000/rs6000-p8swap.c (find_alignment_op): Adjust to
support multiple defintions which are all AND operations with
the mask -16B.
(recombine_lvx_pattern): Adjust to handle multiple AND operations
from find_alignment_op.
(recombine_stvx_pattern): Likewise.
2020-09-16 Jojo R <jiejie_rong@c-sky.com>
* config/csky/csky.md (CSKY_NPARM_FREGS): New.
(call_value_internal_vs/d): New.
(untyped_call): New.
* config/csky/csky.h (TARGET_SINGLE_FPU): New.
(TARGET_DOUBLE_FPU): New.
(FUNCTION_VARG_REGNO_P): New.
(CSKY_VREG_MODE_P): New.
(FUNCTION_VARG_MODE_P): New.
(CUMULATIVE_ARGS): Add extra regs info.
(INIT_CUMULATIVE_ARGS): Use csky_init_cumulative_args.
(FUNCTION_ARG_REGNO_P): Use FUNCTION_VARG_REGNO_P.
* config/csky/csky-protos.h (csky_init_cumulative_args): Extern.
* config/csky/csky.c (csky_cpu_cpp_builtins): Support TARGET_HARD_FLOAT_ABI.
(csky_function_arg): Likewise.
(csky_num_arg_regs): Likewise.
(csky_function_arg_advance): Likewise.
(csky_function_value): Likewise.
(csky_libcall_value): Likewise.
(csky_function_value_regno_p): Likewise.
(csky_arg_partial_bytes): Likewise.
(csky_setup_incoming_varargs): Likewise.
(csky_init_cumulative_args): New.
2020-09-16 Bill Schmidt <wschmidt@linux.ibm.com>
* config/rs6000/rs6000-call.c (altivec_init_builtins): Fix name
of __builtin_altivec_xst_len_r.
2020-09-15 Ilya Leoshkevich <iii@linux.ibm.com>
* rtlanal.c (set_noop_p): Treat subregs of registers in
different modes conservatively.
2020-09-15 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): Make swap
argument by-value and do not change it.
(vect_build_slp_tree_2): Adjust, set swap to NULL after last
use.
2020-09-15 Feng Xue <fxue@os.amperecomputing.com>
PR tree-optimization/94234
* match.pd (T)(A) +- (T)(B) -> (T)(A +- B): New simplification.
2020-09-15 Segher Boessenkool <segher@kernel.crashing.org>
PR rtl-optimization/96475
* bb-reorder.c (duplicate_computed_gotos): If we did anything, run
cleanup_cfg.
2020-09-15 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_build_slp_tree_2): Also consider
building an operand from scalars when building it did not
fail fatally but avoid messing with the upcall splitting
of groups.
2020-09-15 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/arm/arm.c (arm_options_perform_arch_sanity_checks): Do not
check +D32 for CMSE if -mfloat-abi=soft
2020-09-15 liuhongt <hongtao.liu@intel.com>
PR target/96744
* config/i386/x86-tune-costs.h (struct processor_costs):
Increase mask <-> integer cost for non AVX512 target to avoid
spill gpr to mask. Also retune mask <-> integer and
mask_load/store for skylake_cost.
2020-09-15 Jakub Jelinek <jakub@redhat.com>
PR target/97028
* config/i386/sse.md (mul<mode>3<mask_name>_bcs,
<avx512>_div<mode>3<mask_name>_bcst): Use <avx512bcst> instead of
<<avx512bcst>>.
2020-09-15 Tobias Burnus <tobias@codesourcery.com>
PR fortran/96668
* gimplify.c (gimplify_omp_for): Add 'bool openacc' argument;
update omp_finish_clause calls.
(gimplify_adjust_omp_clauses_1, gimplify_adjust_omp_clauses,
gimplify_expr, gimplify_omp_loop): Update omp_finish_clause
and/or gimplify_for calls.
* langhooks-def.h (lhd_omp_finish_clause): Add bool openacc arg.
* langhooks.c (lhd_omp_finish_clause): Likewise.
* langhooks.h (lhd_omp_finish_clause): Likewise.
* omp-low.c (scan_sharing_clauses): Keep GOMP_MAP_TO_PSET cause for
'declare target' vars.
2020-09-15 Feng Xue <fxue@os.amperecomputing.com>
PR tree-optimization/94234
* genmatch.c (dt_simplify::gen_1): Emit check on final simplification
result when "!" is specified on toplevel output expr.
* match.pd ((A * C) +- (B * C) -> (A +- B) * C): Allow folding on expr
with multi-use operands if final result is a simple gimple value.
2020-09-14 Sergei Trofimovich <siarheit@google.com>
* doc/invoke.texi: fix '-fprofile-reproducibility' option
spelling in manual.
2020-09-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/bpf/bpf.md ("nop"): Re-define as `ja 0'.
2020-09-14 Eric Botcazou <ebotcazou@adacore.com>
* cgraphunit.c (cgraph_node::expand_thunk): Make sure to set
cfun->tail_call_marked when forcing a tail call.
* function.c (assign_parm_setup_reg): Always use a register to
load a parameter passed by reference if cfun->tail_call_marked.
2020-09-14 Pat Haugen <pthaugen@linux.ibm.com>
* config/rs6000/power10.md (power10-mffgpr, power10-mftgpr): Rename to
power10-mtvsr/power10-mfvsr.
* config/rs6000/power6.md (X2F_power6, power6-mftgpr, power6-mffgpr):
Remove.
* config/rs6000/power8.md (power8-mffgpr, power8-mftgpr): Rename to
power8-mtvsr/power8-mfvsr.
* config/rs6000/power9.md (power9-mffgpr, power9-mftgpr): Rename to
power9-mtvsr/power9-mfvsr.
* config/rs6000/rs6000.c (rs6000_adjust_cost): Remove Power6
TYPE_MFFGPR cases.
* config/rs6000/rs6000.md (mffgpr, mftgpr, zero_extendsi<mode>2,
extendsi<mode>2, @signbit<mode>2_dm, lfiwax, lfiwzx, *movsi_internal1,
movsi_from_sf, *movdi_from_sf_zero_ext, *mov<mode>_internal,
movsd_hardfloat, movsf_from_si, *mov<mode>_hardfloat64, p8_mtvsrwz,
p8_mtvsrd_df, p8_mtvsrd_sf, p8_mfvsrd_3_<mode>, *movdi_internal64,
unpack<mode>_dm): Rename mffgpr/mftgpr to mtvsr/mfvsr.
* config/rs6000/vsx.md (vsx_mov<mode>_64bit, vsx_extract_<mode>,
vsx_extract_si, *vsx_extract_<mode>_p8): Likewise.
2020-09-14 Jakub Jelinek <jakub@redhat.com>
* config/arm/arm.opt (x_arm_arch_string, x_arm_cpu_string,
x_arm_tune_string): Remove TargetSave entries.
(march=, mcpu=, mtune=): Add Save keyword.
* config/arm/arm.c (arm_option_save): Remove.
(TARGET_OPTION_SAVE): Don't redefine.
(arm_option_restore): Don't restore x_arm_*_string here.
2020-09-14 Jakub Jelinek <jakub@redhat.com>
* opt-read.awk: Also initialize extra_target_var_types array.
* opth-gen.awk: Emit explicit_mask arrays to struct cl_optimization
and cl_target_option. Adjust cl_optimization_save,
cl_optimization_restore, cl_target_option_save and
cl_target_option_restore declarations.
* optc-save-gen.awk: Add opts_set argument to cl_optimization_save,
cl_optimization_restore, cl_target_option_save and
cl_target_option_restore functions and save or restore opts_set
next to the opts values into or from explicit_mask arrays.
In cl_target_option_eq and cl_optimization_option_eq compare
explicit_mask arrays, in cl_target_option_hash and cl_optimization_hash
hash them and in cl_target_option_stream_out,
cl_target_option_stream_in, cl_optimization_stream_out and
cl_optimization_stream_in stream them.
* tree.h (build_optimization_node, build_target_option_node): Add
opts_set argument.
* tree.c (build_optimization_node): Add opts_set argument, pass it
to cl_optimization_save.
(build_target_option_node): Add opts_set argument, pass it to
cl_target_option_save.
* function.c (invoke_set_current_function_hook): Adjust
cl_optimization_restore caller.
* ipa-inline-transform.c (inline_call): Adjust cl_optimization_restore
and build_optimization_node callers.
* target.def (TARGET_OPTION_SAVE, TARGET_OPTION_RESTORE): Add opts_set
argument.
* target-globals.c (save_target_globals_default_opts): Adjust
cl_optimization_restore callers.
* toplev.c (process_options): Adjust build_optimization_node and
cl_optimization_restore callers.
(target_reinit): Adjust cl_optimization_restore caller.
* tree-streamer-in.c (lto_input_ts_function_decl_tree_pointers):
Adjust build_optimization_node and cl_optimization_restore callers.
* doc/tm.texi: Updated.
* config/aarch64/aarch64.c (aarch64_override_options): Adjust
build_target_option_node caller.
(aarch64_option_save, aarch64_option_restore): Add opts_set argument.
(aarch64_set_current_function): Adjust cl_target_option_restore
caller.
(aarch64_option_valid_attribute_p): Adjust cl_target_option_save,
cl_target_option_restore, cl_optimization_restore,
build_optimization_node and build_target_option_node callers.
* config/aarch64/aarch64-c.c (aarch64_pragma_target_parse): Adjust
cl_target_option_restore and build_target_option_node callers.
* config/arm/arm.c (arm_option_save, arm_option_restore): Add
opts_set argument.
(arm_option_override): Adjust cl_target_option_save,
build_optimization_node and build_target_option_node callers.
(arm_set_current_function): Adjust cl_target_option_restore caller.
(arm_valid_target_attribute_tree): Adjust build_target_option_node
caller.
(add_attribute): Formatting fix.
(arm_valid_target_attribute_p): Adjust cl_optimization_restore,
cl_target_option_restore, arm_valid_target_attribute_tree and
build_optimization_node callers.
* config/arm/arm-c.c (arm_pragma_target_parse): Adjust
cl_target_option_restore callers.
* config/csky/csky.c (csky_option_override): Adjust
build_target_option_node and cl_target_option_save callers.
* config/gcn/gcn.c (gcn_fixup_accel_lto_options): Adjust
build_optimization_node and cl_optimization_restore callers.
* config/i386/i386-builtins.c (get_builtin_code_for_version):
Adjust cl_target_option_save and cl_target_option_restore
callers.
* config/i386/i386-c.c (ix86_pragma_target_parse): Adjust
build_target_option_node and cl_target_option_restore callers.
* config/i386/i386-options.c (ix86_function_specific_save,
ix86_function_specific_restore): Add opts_set arguments.
(ix86_valid_target_attribute_tree): Adjust build_target_option_node
caller.
(ix86_valid_target_attribute_p): Adjust build_optimization_node,
cl_optimization_restore, cl_target_option_restore,
ix86_valid_target_attribute_tree and build_optimization_node callers.
(ix86_option_override_internal): Adjust build_target_option_node
caller.
(ix86_reset_previous_fndecl, ix86_set_current_function): Adjust
cl_target_option_restore callers.
* config/i386/i386-options.h (ix86_function_specific_save,
ix86_function_specific_restore): Add opts_set argument.
* config/nios2/nios2.c (nios2_option_override): Adjust
build_target_option_node caller.
(nios2_option_save, nios2_option_restore): Add opts_set argument.
(nios2_valid_target_attribute_tree): Adjust build_target_option_node
caller.
(nios2_valid_target_attribute_p): Adjust build_optimization_node,
cl_optimization_restore, cl_target_option_save and
cl_target_option_restore callers.
(nios2_set_current_function, nios2_pragma_target_parse): Adjust
cl_target_option_restore callers.
* config/pru/pru.c (pru_option_override): Adjust
build_target_option_node caller.
(pru_set_current_function): Adjust cl_target_option_restore
callers.
* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust
cl_target_option_save caller.
(rs6000_option_override_internal): Adjust build_target_option_node
caller.
(rs6000_valid_attribute_p): Adjust build_optimization_node,
cl_optimization_restore, cl_target_option_save,
cl_target_option_restore and build_target_option_node callers.
(rs6000_pragma_target_parse): Adjust cl_target_option_restore and
build_target_option_node callers.
(rs6000_activate_target_options): Adjust cl_target_option_restore
callers.
(rs6000_function_specific_save, rs6000_function_specific_restore):
Add opts_set argument.
* config/s390/s390.c (s390_function_specific_restore): Likewise.
(s390_option_override_internal): Adjust s390_function_specific_restore
caller.
(s390_option_override, s390_valid_target_attribute_tree): Adjust
build_target_option_node caller.
(s390_valid_target_attribute_p): Adjust build_optimization_node,
cl_optimization_restore and cl_target_option_restore callers.
(s390_activate_target_options): Adjust cl_target_option_restore
caller.
* config/s390/s390-c.c (s390_cpu_cpp_builtins): Adjust
cl_target_option_save caller.
(s390_pragma_target_parse): Adjust build_target_option_node and
cl_target_option_restore callers.
2020-09-13 Roger Sayle <roger@nextmovesoftware.com>
* config/pa/pa.c (hppa_rtx_costs) [ASHIFT, ASHIFTRT, LSHIFTRT]:
Provide accurate costs for DImode shifts of integer constants.
2020-09-12 Roger Sayle <roger@nextmovesoftware.com>
John David Anglin <danglin@gcc.gnu.org>
* config/pa/pa.md (shrpsi4_1, shrpsi4_2): New define_insns split
out from previous shrpsi4 providing two commutitive variants using
plus_xor_ior_operator as a predicate.
(shrpdi4_1, shrpdi4_2, shrpdi_3, shrpdi_4): Likewise DImode versions
where _1 and _2 take register shifts, and _3 and _4 for integers.
(rotlsi3_internal): Name this anonymous instruction.
(rotrdi3): New DImode insn copied from rotrsi3.
(rotldi3): New DImode expander copied from rotlsi3.
(rotldi4_internal): New DImode insn copied from rotsi3_internal.
2020-09-11 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_maybe_emit_maxc_minc): Rename
from rs6000_emit_p9_fp_minmax. Change return type to bool. Add
comments to document NaN/signed zero behavior.
(rs6000_maybe_emit_fp_cmove): Rename from rs6000_emit_p9_fp_cmove.
(have_compare_and_set_mask): New helper function.
(rs6000_emit_cmove): Update calls to new names and the new helper
function.
2020-09-11 Nathan Sidwell <nathan@acm.org>
* config/i386/sse.md (mov<mode>): Fix operand indices.
2020-09-11 Martin Sebor <msebor@redhat.com>
PR middle-end/96903
* builtins.c (compute_objsize): Remove incorrect offset adjustment.
(compute_objsize): Adjust offset range here instead.
2020-09-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/97020
* tree-vect-slp.c (vect_slp_analyze_operations): Apply
SLP costs when doing loop vectorization.
2020-09-11 Tom de Vries <tdevries@suse.de>
PR target/96964
* config/nvptx/nvptx.md (define_expand "atomic_test_and_set"): New
expansion.
2020-09-11 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn.c (gcn_hard_regno_mode_ok): Align TImode registers.
* config/gcn/gcn.md: Assert that TImode registers do not early clobber.
2020-09-11 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (_slp_instance::location): New method.
(vect_schedule_slp): Adjust prototype.
* tree-vectorizer.c (vec_info::remove_stmt): Adjust
the BB region begin if we removed the stmt it points to.
* tree-vect-loop.c (vect_transform_loop): Adjust.
* tree-vect-slp.c (_slp_instance::location): Implement.
(vect_analyze_slp_instance): For BB vectorization set
vect_location to that of the instance.
(vect_slp_analyze_operations): Likewise.
(vect_bb_vectorization_profitable_p): Remove wrapper.
(vect_slp_analyze_bb_1): Remove cost check here.
(vect_slp_region): Cost check and code generate subgraphs separately,
report optimized locations and missed optimizations due to
profitability for each of them.
(vect_schedule_slp): Get the vector of SLP graph entries to
vectorize as argument.
2020-09-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/97013
* tree-vect-slp.c (vect_slp_analyze_bb_1): Remove duplicate dumping.
2020-09-11 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_build_slp_tree_1): Check vector
types for all lanes are compatible.
(vect_analyze_slp_instance): Appropriately check for stores.
(vect_schedule_slp): Likewise.
2020-09-11 Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.c (nvptx_assemble_value): Fix undefined
behaviour.
2020-09-11 Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.c (nvptx_assemble_value): Handle negative
__int128.
2020-09-11 Aaron Sawdey <acsawdey@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Change default.
2020-09-10 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000-protos.h (rs6000_emit_cmove): Change return
type to bool.
(rs6000_emit_int_cmove): Change return type to bool.
* config/rs6000/rs6000.c (rs6000_emit_cmove): Change return type
to bool.
(rs6000_emit_int_cmove): Change return type to bool.
2020-09-10 Tom de Vries <tdevries@suse.de>
PR target/97004
* config/nvptx/nvptx.c (nvptx_assemble_value): Handle shift by
number of bits in shift operand.
2020-09-10 Jakub Jelinek <jakub@redhat.com>
* lto-streamer-out.c (collect_block_tree_leafs): Recurse on
root rather than BLOCK_SUBBLOCKS (root).
2020-09-10 Alex Coplan <alex.coplan@arm.com>
* config/aarch64/aarch64-cores.def: Add Cortex-R82.
* config/aarch64/aarch64-tune.md: Regenerate.
* doc/invoke.texi: Add entry for Cortex-R82.
2020-09-10 Alex Coplan <alex.coplan@arm.com>
* common/config/aarch64/aarch64-common.c
(aarch64_get_extension_string_for_isa_flags): Don't force +crc for
Armv8-R.
* config/aarch64/aarch64-arches.def: Add entry for Armv8-R.
* config/aarch64/aarch64-c.c (aarch64_define_unconditional_macros): Set
__ARM_ARCH_PROFILE correctly for Armv8-R.
* config/aarch64/aarch64.h (AARCH64_FL_V8_R): New.
(AARCH64_FL_FOR_ARCH8_R): New.
(AARCH64_ISA_V8_R): New.
* doc/invoke.texi: Add Armv8-R to architecture table.
2020-09-10 Jakub Jelinek <jakub@redhat.com>
* config/arm/arm.c (arm_override_options_after_change_1): Add opts_set
argument, test opts_set->x_str_align_functions rather than
opts->x_str_align_functions.
(arm_override_options_after_change, arm_option_override_internal,
arm_set_current_function): Adjust callers.
2020-09-10 Jakub Jelinek <jakub@redhat.com>
PR target/96939
* config/arm/arm.c (arm_override_options_after_change): Don't call
arm_configure_build_target here.
(arm_set_current_function): Call arm_override_options_after_change_1
at the end.
2020-09-10 Pat Haugen <pthaugen@linux.ibm.com>
* config/rs6000/rs6000.md
(lfiwzx, floatunssi<mode>2_lfiwzx, p8_mtvsrwz, p8_mtvsrd_sf): Fix insn
type.
* config/rs6000/vsx.md
(vsx_concat_<mode>, vsx_splat_<mode>_reg, vsx_splat_v4sf): Likewise.
2020-09-10 Jonathan Yong <10walls@gmail.com>
* config.host: Adjust plugin name for Windows.
2020-09-10 Tom de Vries <tdevries@suse.de>
PR tree-optimization/97000
* tree-cfgcleanup.c (cleanup_call_ctrl_altering_flag): Don't clear
flag for IFN_UNIQUE.
2020-09-10 Jakub Jelinek <jakub@redhat.com>
PR debug/93865
* lto-streamer.h (struct output_block): Add emit_pwd member.
* lto-streamer-out.c: Include toplev.h.
(clear_line_info): Set emit_pwd.
(lto_output_location_1): Encode the ob->current_file != xloc.file
bit directly into the location number. If changing file, emit
additionally a bit whether pwd is emitted and emit it before the
first relative pathname since clear_line_info.
(output_function, output_constructor): Don't call clear_line_info
here.
* lto-streamer-in.c (struct string_pair_map): New type.
(struct string_pair_map_hasher): New type.
(string_pair_map_hasher::hash): New method.
(string_pair_map_hasher::equal): New method.
(path_name_pair_hash_table, string_pair_map_allocator): New variables.
(relative_path_prefix, canon_relative_path_prefix,
canon_relative_file_name): New functions.
(canon_file_name): Add relative_prefix argument, if non-NULL
and string is a relative path, return canon_relative_file_name.
(lto_location_cache::input_location_and_block): Decode file change
bit from the location number. If changing file, unpack bit whether
pwd is streamed and stream in pwd. Adjust canon_file_name caller.
(lto_free_file_name_hash): Delete path_name_pair_hash_table
and string_pair_map_allocator.
2020-09-10 Richard Biener <rguenther@suse.de>
PR tree-optimization/96043
* tree-vectorizer.h (_slp_instance::cost_vec): New.
(_slp_instance::subgraph_entries): Likewise.
(BB_VINFO_TARGET_COST_DATA): Remove.
* tree-vect-slp.c (vect_free_slp_instance): Free
cost_vec and subgraph_entries.
(vect_analyze_slp_instance): Initialize them.
(vect_slp_analyze_operations): Defer passing costs to
the target, instead record them in the SLP graph entry.
(get_ultimate_leader): New helper for graph partitioning.
(vect_bb_partition_graph_r): Likewise.
(vect_bb_partition_graph): New function to partition the
SLP graph into independently costable parts.
(vect_bb_vectorization_profitable_p): Adjust to work on
a subgraph.
(vect_bb_vectorization_profitable_p): New wrapper,
discarding non-profitable vectorization of subgraphs.
(vect_slp_analyze_bb_1): Call vect_bb_partition_graph before
costing.
2020-09-09 David Malcolm <dmalcolm@redhat.com>
PR analyzer/94355
* doc/invoke.texi: Document -Wanalyzer-mismatching-deallocation.
2020-09-09 Segher Boessenkool <segher@kernel.crashing.org>
PR rtl-optimization/96475
* bb-reorder.c (maybe_duplicate_computed_goto): Remove single_pred_p
micro-optimization.
2020-09-09 Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.c (nvptx_assemble_decl_begin): Fix Wformat
warning.
2020-09-09 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_attempt_slp_rearrange_stmts): Do
nothing when the permutation doesn't permute.
2020-09-09 Tom de Vries <tdevries@suse.de>
PR target/96991
* config/nvptx/nvptx.c (write_fn_proto): Fix boolean type check.
2020-09-09 Richard Biener <rguenther@suse.de>
* tree-vect-stmts.c (vectorizable_comparison): Allow
STMT_VINFO_LIVE_P stmts.
2020-09-09 Richard Biener <rguenther@suse.de>
* tree-vect-stmts.c (vectorizable_condition): Allow
STMT_VINFO_LIVE_P stmts.
2020-09-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/96978
* tree-vect-stmts.c (vectorizable_condition): Do not
look at STMT_VINFO_LIVE_P for BB vectorization.
(vectorizable_comparison): Likewise.
2020-09-09 liuhongt <hongtao.liu@intel.com>
PR target/96955
* config/i386/i386.md (get_thread_pointer<mode>): New
expander.
2020-09-08 Julian Brown <julian@codesourcery.com>
* config/gcn/gcn-valu.md (scatter<mode>_insn_1offset_ds<exec_scatter>):
Add waitcnt.
* config/gcn/gcn.md (*mov<mode>_insn, *movti_insn): Add waitcnt to
ds_write alternatives.
2020-09-08 Julian Brown <julian@codesourcery.com>
* config/gcn/mkoffload.c (process_asm): Initialise regcount. Update
scanning for SGPR/VGPR usage for HSACO v3.
2020-09-08 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/96967
* tree-vrp.c (find_case_label_range): Cast label range to
type of switch operand.
2020-09-08 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_file_end): Fix jumbled
HAVE_AS_MSPABI_ATTRIBUTE and HAVE_AS_GNU_ATTRIBUTE checks.
* configure: Regenerate.
* configure.ac: Use ".mspabi_attribute 4,2" to check for assembler
support for this object attribute directive.
2020-09-08 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* common/config/msp430/msp430-common.c (msp430_handle_option): Remove
OPT_mcpu_ handling.
Set target_cpu value to new enum values when parsing certain -mmcu=
values.
* config/msp430/msp430-opts.h (enum msp430_cpu_types): New.
* config/msp430/msp430.c (msp430_option_override): Handle new
target_cpu enum values.
Set target_cpu using extracted value for given MCU when -mcpu=
option is not passed by the user.
* config/msp430/msp430.opt: Handle -mcpu= values using enums.
2020-09-07 Richard Sandiford <richard.sandiford@arm.com>
PR rtl-optimization/96796
* lra-constraints.c (in_class_p): Add a default-false
allow_all_reload_class_changes_p parameter. Do not treat
reload moves specially when the parameter is true.
(get_reload_reg): Try to narrow the class of an existing OP_OUT
reload if we're reloading a reload pseudo in a reload instruction.
2020-09-07 Andrea Corallo <andrea.corallo@arm.com>
* tree-vect-loop.c (vect_estimate_min_profitable_iters): Revert
dead-code removal introduced by 09fa6acd8d9 + add a comment to
clarify.
2020-09-07 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* doc/rtl.texi (subreg): Fix documentation to state there is a known
number of undefined bits in regs and subregs of MODE_PARTIAL_INT modes.
2020-09-07 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_option_override): Don't set the
ISA to 430 when the MCU is unrecognized.
2020-09-07 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_libc_has_function): Report sincos
available from 10.9.
2020-09-07 Alex Coplan <alex.coplan@arm.com>
* config/aarch64/aarch64.md (*adds_mul_imm_<mode>): Delete.
(*subs_mul_imm_<mode>): Delete.
(*adds_<optab><mode>_multp2): Delete.
(*subs_<optab><mode>_multp2): Delete.
(*add_mul_imm_<mode>): Delete.
(*add_<optab><ALLX:mode>_mult_<GPI:mode>): Delete.
(*add_<optab><SHORT:mode>_mult_si_uxtw): Delete.
(*add_<optab><mode>_multp2): Delete.
(*add_<optab>si_multp2_uxtw): Delete.
(*add_uxt<mode>_multp2): Delete.
(*add_uxtsi_multp2_uxtw): Delete.
(*sub_mul_imm_<mode>): Delete.
(*sub_mul_imm_si_uxtw): Delete.
(*sub_<optab><mode>_multp2): Delete.
(*sub_<optab>si_multp2_uxtw): Delete.
(*sub_uxt<mode>_multp2): Delete.
(*sub_uxtsi_multp2_uxtw): Delete.
(*neg_mul_imm_<mode>2): Delete.
(*neg_mul_imm_si2_uxtw): Delete.
* config/aarch64/predicates.md (aarch64_pwr_imm3): Delete.
(aarch64_pwr_2_si): Delete.
(aarch64_pwr_2_di): Delete.
2020-09-07 Alex Coplan <alex.coplan@arm.com>
* config/aarch64/aarch64.md
(*adds_<optab><ALLX:mode>_<GPI:mode>): Ensure extended operand
agrees with width of extension specifier.
(*subs_<optab><ALLX:mode>_<GPI:mode>): Likewise.
(*adds_<optab><ALLX:mode>_shift_<GPI:mode>): Likewise.
(*subs_<optab><ALLX:mode>_shift_<GPI:mode>): Likewise.
(*add_<optab><ALLX:mode>_<GPI:mode>): Likewise.
(*add_<optab><ALLX:mode>_shft_<GPI:mode>): Likewise.
(*add_uxt<mode>_shift2): Likewise.
(*sub_<optab><ALLX:mode>_<GPI:mode>): Likewise.
(*sub_<optab><ALLX:mode>_shft_<GPI:mode>): Likewise.
(*sub_uxt<mode>_shift2): Likewise.
(*cmp_swp_<optab><ALLX:mode>_reg<GPI:mode>): Likewise.
(*cmp_swp_<optab><ALLX:mode>_shft_<GPI:mode>): Likewise.
2020-09-07 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_analyze_slp_instance): Dump
stmts we start SLP analysis from, failure and splitting.
(vect_schedule_slp): Dump SLP graph entry and root stmt
we are about to emit code for.
2020-09-07 Martin Storsjö <martin@martin.st>
* dwarf2out.c (file_name_acquire): Make a strchr return value
pointer to const.
2020-09-07 Jakub Jelinek <jakub@redhat.com>
PR debug/94235
* lto-streamer-out.c (output_cfg): Also stream goto_locus for edges.
Use bp_pack_var_len_unsigned instead of streamer_write_uhwi to stream
e->dest->index and e->flags.
(output_function): Call output_cfg before output_ssa_name, rather than
after streaming all bbs.
* lto-streamer-in.c (input_cfg): Stream in goto_locus for edges.
Use bp_unpack_var_len_unsigned instead of streamer_read_uhwi to stream
in dest_index and edge_flags.
2020-09-07 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (vectorizable_live_operation): Adjust.
* tree-vect-loop.c (vectorizable_live_operation): Vectorize
live lanes out of basic-block vectorization nodes.
* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): New function.
(vect_slp_analyze_operations): Analyze live lanes and their
vectorization possibility after the whole SLP graph is final.
(vect_bb_slp_scalar_cost): Adjust for vectorized live lanes.
* tree-vect-stmts.c (can_vectorize_live_stmts): Adjust.
(vect_transform_stmt): Call can_vectorize_live_stmts also for
basic-block vectorization.
2020-09-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/96698
PR tree-optimization/96920
* tree-vectorizer.h (loop_vec_info::reduc_latch_defs): Remove.
(loop_vec_info::reduc_latch_slp_defs): Likewise.
* tree-vect-stmts.c (vect_transform_stmt): Remove vectorized
cycle PHI latch code.
* tree-vect-loop.c (maybe_set_vectorized_backedge_value): New
helper to set vectorized cycle PHI latch values.
(vect_transform_loop): Walk over all PHIs again after
vectorizing them, calling maybe_set_vectorized_backedge_value.
Call maybe_set_vectorized_backedge_value for each vectorized
stmt. Remove delayed update code.
* tree-vect-slp.c (vect_analyze_slp_instance): Initialize
SLP instance reduc_phis member.
(vect_schedule_slp): Set vectorized cycle PHI latch values.
2020-09-04 Andrea Corallo <andrea.corallo@arm.com>
* tree-vect-loop.c (vect_estimate_min_profitable_iters): Remove
dead code as LOOP_VINFO_USING_PARTIAL_VECTORS_P (loop_vinfo) is
always verified.
2020-09-04 Christophe Lyon <christophe.lyon@linaro.org>
PR target/96769
* config/arm/thumb1.md: Move movsi splitter for
arm_disable_literal_pool after the other movsi splitters.
2020-09-04 Aldy Hernandez <aldyh@redhat.com>
* range-op.cc (range_operator::fold_range): Rename widest_irange
to int_range_max.
(operator_div::wi_fold): Same.
(operator_lshift::op1_range): Same.
(operator_rshift::op1_range): Same.
(operator_cast::fold_range): Same.
(operator_cast::op1_range): Same.
(operator_bitwise_and::remove_impossible_ranges): Same.
(operator_bitwise_and::op1_range): Same.
(operator_abs::op1_range): Same.
(range_cast): Same.
(widest_irange_tests): Same.
(range3_tests): Rename irange3 to int_range3.
(int_range_max_tests): Rename from widest_irange_tests.
Rename widest_irange to int_range_max.
(operator_tests): Rename widest_irange to int_range_max.
(range_tests): Same.
* tree-vrp.c (find_case_label_range): Same.
* value-range.cc (irange::irange_intersect): Same.
(irange::invert): Same.
* value-range.h: Same.
2020-09-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/96931
* tree-cfgcleanup.c (cleanup_call_ctrl_altering_flag): If
there's a fallthru edge and no abnormal edge the call is
no longer control-altering.
(cleanup_control_flow_bb): Pass down the BB to
cleanup_call_ctrl_altering_flag.
2020-09-04 Jakub Jelinek <jakub@redhat.com>
* lto-streamer.h (stream_input_location_now): Remove declaration.
* lto-streamer-in.c (stream_input_location_now): Remove.
(input_eh_region, input_struct_function_base): Use
stream_input_location instead of stream_input_location_now.
2020-09-04 Jakub Jelinek <jakub@redhat.com>
* lto-streamer.h (struct output_block): Add reset_locus member.
* lto-streamer-out.c (clear_line_info): Set reset_locus to true.
(lto_output_location_1): If reset_locus, clear it and ensure
current_{file,line,col} is different from xloc members.
2020-09-04 David Faust <david.faust@oracle.com>
* config/bpf/bpf.h (ASM_SPEC): Pass -mxbpf to gas, if specified.
* config/bpf/bpf.c (bpf_output_call): Support indirect calls in xBPF.
2020-09-03 Martin Jambor <mjambor@suse.cz>
PR tree-optimization/96820
* tree-sra.c (create_access): Disqualify candidates with accesses
beyond the end of the original aggregate.
(maybe_add_sra_candidate): Check that candidate type size fits
signed uhwi for the sake of consistency.
2020-09-03 Will Schmidt <will_schmidt@vnet.ibm.com>
* config/rs6000/rs6000-call.c (rs6000_init_builtin): Update V2DI_type_node
and unsigned_V2DI_type_node definitions.
2020-09-03 Jakub Jelinek <jakub@redhat.com>
PR c++/96901
* tree.h (struct decl_tree_traits): New type.
(decl_tree_map): New typedef.
2020-09-03 Jakub Jelinek <jakub@redhat.com>
PR lto/94311
* gimple.h (gimple_location_ptr, gimple_phi_arg_location_ptr): New
functions.
* streamer-hooks.h (struct streamer_hooks): Add
output_location_and_block callback. Fix up formatting for
output_location.
(stream_output_location_and_block): Define.
* lto-streamer.h (class lto_location_cache): Fix comment typo. Add
current_block member.
(lto_location_cache::input_location_and_block): New method.
(lto_location_cache::lto_location_cache): Initialize current_block.
(lto_location_cache::cached_location): Add block member.
(struct output_block): Add current_block member.
(lto_output_location): Formatting fix.
(lto_output_location_and_block): Declare.
* lto-streamer.c (lto_streamer_hooks_init): Initialize
streamer_hooks.output_location_and_block.
* lto-streamer-in.c (lto_location_cache::cmp_loc): Also compare
block members.
(lto_location_cache::apply_location_cache): Handle blocks.
(lto_location_cache::accept_location_cache,
lto_location_cache::revert_location_cache): Fix up function comments.
(lto_location_cache::input_location_and_block): New method.
(lto_location_cache::input_location): Implement using
input_location_and_block.
(input_function): Invoke apply_location_cache after streaming in all
bbs.
* lto-streamer-out.c (clear_line_info): Set current_block.
(lto_output_location_1): New function, moved from lto_output_location,
added block handling.
(lto_output_location): Implement using lto_output_location_1.
(lto_output_location_and_block): New function.
* gimple-streamer-in.c (input_phi): Use input_location_and_block
to input and cache both location and block.
(input_gimple_stmt): Likewise.
* gimple-streamer-out.c (output_phi): Use
stream_output_location_and_block.
(output_gimple_stmt): Likewise.
2020-09-03 Richard Biener <rguenther@suse.de>
* tree-vect-generic.c (tree_vec_extract): Remove odd
special-casing of boolean vectors.
* fold-const.c (fold_ternary_loc): Handle boolean vector
type BIT_FIELD_REFs.
2020-09-03 Hongtao Liu <hongtao.liu@intel.com>
PR target/87767
* config/i386/i386-features.c
(replace_constant_pool_with_broadcast): New function.
(constant_pool_broadcast): Ditto.
(class pass_constant_pool_broadcast): New pass.
(make_pass_constant_pool_broadcast): Ditto.
(remove_partial_avx_dependency): Call
replace_constant_pool_with_broadcast under TARGET_AVX512F, it
would save compile time when both pass rpad and cpb are
available.
(remove_partial_avx_dependency_gate): New function.
(class pass_remove_partial_avx_dependency::gate): Call
remove_partial_avx_dependency_gate.
* config/i386/i386-passes.def: Insert new pass after combine.
* config/i386/i386-protos.h
(make_pass_constant_pool_broadcast): Declare.
* config/i386/sse.md (*avx512dq_mul<mode>3<mask_name>_bcst):
New define_insn.
(*avx512f_mul<mode>3<mask_name>_bcst): Ditto.
* config/i386/avx512fintrin.h (_mm512_set1_ps,
_mm512_set1_pd,_mm512_set1_epi32, _mm512_set1_epi64): Adjusted.
2020-09-02 Jonathan Wakely <jwakely@redhat.com>
PR c++/60304
* ginclude/stdbool.h (bool, false, true): Never define for C++.
2020-09-02 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* doc/invoke.texi (MSP430 options): Fix -mlarge description to
indicate size_t is a 20-bit type.
2020-09-02 Roger Sayle <roger@nextmovesoftware.com>
* config/pa/pa.c (hppa_rtx_costs) [ASHIFT, ASHIFTRT, LSHIFTRT]:
Provide accurate costs for shifts of integer constants.
2020-09-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/bpf/bpf.c (bpf_asm_named_section): Delete.
(TARGET_ASM_NAMED_SECTION): Likewise.
2020-09-02 Jose E. Marchesi <jemarch@gnu.org>
* config.gcc: Use elfos.h in bpf-*-* targets.
* config/bpf/bpf.h (MAX_OFILE_ALIGNMENT): Remove definition.
(COMMON_ASM_OP): Likewise.
(INIT_SECTION_ASM_OP): Likewise.
(FINI_SECTION_ASM_OP): Likewise.
(ASM_OUTPUT_SKIP): Likewise.
(ASM_OUTPUT_ALIGNED_COMMON): Likewise.
(ASM_OUTPUT_ALIGNED_LOCAL): Likewise.
2020-09-01 Martin Sebor <msebor@redhat.com>
* builtins.c (compute_objsize): Only replace the upper bound
of a POINTER_PLUS offset when it's less than the lower bound.
2020-09-01 Peter Bergner <bergner@linux.ibm.com>
PR target/96808
* config/rs6000/rs6000-call.c (rs6000_gimple_fold_mma_builtin): Do not
reuse accumulator memory reference for source and destination accesses.
2020-09-01 Martin Liska <mliska@suse.cz>
* cfgrtl.c (rtl_create_basic_block): Use default value for
growth vector function.
* gimple.c (gimple_set_bb): Likewise.
* symbol-summary.h: Likewise.
* tree-cfg.c (init_empty_tree_cfg_for_function): Likewise.
(build_gimple_cfg): Likewise.
(create_bb): Likewise.
(move_block_to_fn): Likewise.
2020-09-01 Martin Liska <mliska@suse.cz>
* vec.h (vec_safe_grow): Change default of exact to false.
(vec_safe_grow_cleared): Likewise.
2020-09-01 Roger Sayle <roger@nextmovesoftware.com>
PR middle-end/90597
* targhooks.c (default_vector_alignment): Return at least the
GET_MODE_ALIGNMENT for the type's mode.
2020-09-01 Richard Biener <rguenther@suse.de>
PR rtl-optimization/96812
* tree-ssa-address.c (copy_ref_info): Also copy dependence info.
* cfgrtl.h (duplicate_insn_chain): Adjust prototype.
* cfgrtl.c (duplicate_insn_chain): Remap dependence info
if requested.
(cfg_layout_duplicate_bb): Make sure we remap dependence info.
* modulo-sched.c (duplicate_insns_of_cycles): Remap dependence
info.
(generate_prolog_epilog): Adjust.
* config/c6x/c6x.c (hwloop_optimize): Remap dependence info.
2020-09-01 Kewen Lin <linkw@gcc.gnu.org>
* doc/sourcebuild.texi (has_arch_pwr5, has_arch_pwr6, has_arch_pwr7,
has_arch_pwr8, has_arch_pwr9): Document.
2020-08-31 Carl Love <cel@us.ibm.com>
PR target/85830
* config/rs6000/altivec.h (vec_popcntb, vec_popcnth, vec_popcntw,
vec_popcntd): Remove defines.
2020-08-31 Marek Polacek <polacek@redhat.com>
Jason Merrill <jason@redhat.com>
PR c++/93529
* tree.c (build_constructor_from_vec): New.
* tree.h (build_constructor_from_vec): Declare.
2020-08-31 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/96818
* tree-vrp.c (find_case_label_range): Cast label range to
type of switch operand.
2020-08-31 liuhongt <hongtao.liu@intel.com>
PR target/96551
* config/i386/sse.md (vec_unpacku_float_hi_v16si): For vector
compare to integer mask, don't use gen_rtx_LT, use
ix86_expand_mask_vec_cmp instead.
(vec_unpacku_float_hi_v16si): Ditto.
2020-08-31 Jakub Jelinek <jakub@redhat.com>
* tree-cfg.c (verify_gimple_switch): If the first non-default case
label has CASE_HIGH, verify it has the same type as CASE_LOW.
2020-08-31 Feng Xue <fxue@os.amperecomputing.com>
PR ipa/96806
* ipa-cp.c (decide_about_value): Use safe_add to avoid cost addition
overflow.
2020-08-31 Jakub Jelinek <jakub@redhat.com>
PR middle-end/54201
* varasm.c: Include alloc-pool.h.
(output_constant_pool_contents): Emit desc->mark < 0 entries as
aliases.
(struct constant_descriptor_rtx_data): New type.
(constant_descriptor_rtx_data_cmp): New function.
(struct const_rtx_data_hasher): New type.
(const_rtx_data_hasher::hash, const_rtx_data_hasher::equal): New
methods.
(optimize_constant_pool): New function.
(output_shared_constant_pool): Call it if TARGET_SUPPORTS_ALIASES.
2020-08-31 Kewen Lin <linkw@gcc.gnu.org>
* doc/sourcebuild.texi (vect_len_load_store,
vect_partial_vectors_usage_1, vect_partial_vectors_usage_2,
vect_partial_vectors): Document.
2020-08-30 Martin Sebor <msebor@redhat.com>
* builtins.c (access_ref::access_ref): Call get_size_range instead
of get_range.
2020-08-30 Jakub Jelinek <jakub@redhat.com>
* config/i386/sse.md (ssse3_pshufbv8qi): Use gen_int_mode instead of
GEN_INT, and ix86_build_const_vector instead of gen_rtvec and
gen_rtx_CONT_VECTOR.
2020-08-29 Bill Schmidt <wschmidt@linux.ibm.com>
* config/rs6000/rs6000-builtin.def (MASK_FOR_STORE): Remove.
* config/rs6000/rs6000-call.c (rs6000_expand_builtin): Remove
all logic for ALTIVEC_BUILTIN_MASK_FOR_STORE.
2020-08-28 Martin Sebor <msebor@redhat.com>
* attribs.c (init_attr_rdwr_indices): Use global access_mode.
* attribs.h (struct attr_access): Same.
* builtins.c (fold_builtin_strlen): Add argument.
(compute_objsize): Declare.
(get_range): Declare.
(check_read_access): New function.
(access_ref::access_ref): Define ctor.
(warn_string_no_nul): Add arguments. Handle -Wstrintop-overread.
(check_nul_terminated_array): Handle source strings of different
ranges of sizes.
(expand_builtin_strlen): Remove warning code, call check_read_access
instead. Declare locals closer to their initialization.
(expand_builtin_strnlen): Same.
(maybe_warn_for_bound): New function.
(warn_for_access): Remove argument. Handle -Wstrintop-overread.
(inform_access): Change argument type.
(get_size_range): New function.
(check_access): Remove unused arguments. Add new arguments. Handle
-Wstrintop-overread. Move warning code to helpers and call them.
Call check_nul_terminated_array.
(check_memop_access): Remove unnecessary and provide additional
arguments in calls.
(expand_builtin_memchr): Call check_read_access.
(expand_builtin_strcat): Remove unnecessary and provide additional
arguments in calls.
(expand_builtin_strcpy): Same.
(expand_builtin_strcpy_args): Same. Avoid testing no-warning bit.
(expand_builtin_stpcpy_1): Remove unnecessary and provide additional
arguments in calls.
(expand_builtin_stpncpy): Same.
(check_strncat_sizes): Same.
(expand_builtin_strncat): Remove unnecessary and provide additional
arguments in calls. Adjust comments.
(expand_builtin_strncpy): Remove unnecessary and provide additional
arguments in calls.
(expand_builtin_memcmp): Remove warning code. Call check_access.
(expand_builtin_strcmp): Call check_access instead of
check_nul_terminated_array.
(expand_builtin_strncmp): Handle -Wstrintop-overread.
(expand_builtin_fork_or_exec): Call check_access instead of
check_nul_terminated_array.
(expand_builtin): Same.
(fold_builtin_1): Pass additional argument.
(fold_builtin_n): Same.
(fold_builtin_strpbrk): Remove calls to check_nul_terminated_array.
(expand_builtin_memory_chk): Add comments.
(maybe_emit_chk_warning): Remove unnecessary and provide additional
arguments in calls.
(maybe_emit_sprintf_chk_warning): Same. Adjust comments.
* builtins.h (warn_string_no_nul): Add arguments.
(struct access_ref): Add member and ctor argument.
(struct access_data): Add members and ctor.
(check_access): Adjust signature.
* calls.c (maybe_warn_nonstring_arg): Return an indication of
whether a warning was issued. Issue -Wstrintop-overread instead
of -Wstringop-overflow.
(append_attrname): Adjust to naming changes.
(maybe_warn_rdwr_sizes): Same. Remove unnecessary and provide
additional arguments in calls.
* calls.h (maybe_warn_nonstring_arg): Return bool.
* doc/invoke.texi (-Wstringop-overread): Document new option.
* gimple-fold.c (gimple_fold_builtin_strcpy): Provide an additional
argument in call.
(gimple_fold_builtin_stpcpy): Same.
* tree-ssa-uninit.c (maybe_warn_pass_by_reference): Adjust to naming
changes.
* tree.h (enum access_mode): New type.
2020-08-28 Bill Schmidt <wschmidt@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_call_aix): Remove test for r12.
(rs6000_sibcall_aix): Likewise.
2020-08-28 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn-tree.c (gcn_goacc_get_worker_red_decl): Add "true"
parameter to vec_safe_grow_cleared.
2020-08-28 Martin Sebor <msebor@redhat.com>
* ggc-common.c (gt_pch_save): Add argument to a call.
2020-08-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
PR target/96357
* config/aarch64/aarch64-sve.md
(cond_sub<mode>_relaxed_const): Updated and renamed from
cond_sub<mode>_any_const pattern.
(cond_sub<mode>_strict_const): New pattern.
2020-08-28 Wei Wentao <weiwt.fnst@cn.fujitsu.com>
* doc/rtl.texi: Fix typo.
2020-08-28 Uros Bizjak <ubizjak@gmail.com>
PR target/96744
* config/i386/i386-expand.c (split_double_mode): Also handle
E_P2HImode and E_P2QImode.
* config/i386/sse.md (MASK_DWI): New define_mode_iterator.
(mov<mode>): New expander for P2HI,P2QI.
(*mov<mode>_internal): New define_insn_and_split to split
movement of P2QI/P2HI to 2 movqi/movhi patterns after reload.
2020-08-28 liuhongt <hongtao.liu@intel.com>
* common/config/i386/i386-common.c (ix86_handle_option): Set
AVX512DQ when AVX512VP2INTERSECT exists.
2020-08-27 Jakub Jelinek <jakub@redhat.com>
PR target/65146
* config/i386/i386.c (iamcu_alignment): Don't decrease alignment
for TYPE_ATOMIC types.
(ix86_local_alignment): Likewise.
(ix86_minimum_alignment): Likewise.
(x86_field_alignment): Likewise, and emit a -Wpsabi diagnostic
for it.
2020-08-27 Bill Schmidt <wschmidt@linux.ibm.com>
PR target/96787
* config/rs6000/rs6000.c (rs6000_sibcall_aix): Support
indirect call for ELFv2.
2020-08-27 Richard Biener <rguenther@suse.de>
PR tree-optimization/96522
* tree-ssa-address.c (copy_ref_info): Reset flow-sensitive
info of the copied points-to. Transfer bigger alignment
via the access type.
* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_stmt):
Reset all flow-sensitive info.
2020-08-27 Martin Liska <mliska@suse.cz>
* alias.c (init_alias_analysis): Set exact argument of a vector
growth function to true.
* calls.c (internal_arg_pointer_based_exp_scan): Likewise.
* cfgbuild.c (find_many_sub_basic_blocks): Likewise.
* cfgexpand.c (expand_asm_stmt): Likewise.
* cfgrtl.c (rtl_create_basic_block): Likewise.
* combine.c (combine_split_insns): Likewise.
(combine_instructions): Likewise.
* config/aarch64/aarch64-sve-builtins.cc (function_expander::add_output_operand): Likewise.
(function_expander::add_input_operand): Likewise.
(function_expander::add_integer_operand): Likewise.
(function_expander::add_address_operand): Likewise.
(function_expander::add_fixed_operand): Likewise.
* df-core.c (df_worklist_dataflow_doublequeue): Likewise.
* dwarf2cfi.c (update_row_reg_save): Likewise.
* early-remat.c (early_remat::init_block_info): Likewise.
(early_remat::finalize_candidate_indices): Likewise.
* except.c (sjlj_build_landing_pads): Likewise.
* final.c (compute_alignments): Likewise.
(grow_label_align): Likewise.
* function.c (temp_slots_at_level): Likewise.
* fwprop.c (build_single_def_use_links): Likewise.
(update_uses): Likewise.
* gcc.c (insert_wrapper): Likewise.
* genautomata.c (create_state_ainsn_table): Likewise.
(add_vect): Likewise.
(output_dead_lock_vect): Likewise.
* genmatch.c (capture_info::capture_info): Likewise.
(parser::finish_match_operand): Likewise.
* genrecog.c (optimize_subroutine_group): Likewise.
(merge_pattern_info::merge_pattern_info): Likewise.
(merge_into_decision): Likewise.
(print_subroutine_start): Likewise.
(main): Likewise.
* gimple-loop-versioning.cc (loop_versioning::loop_versioning): Likewise.
* gimple.c (gimple_set_bb): Likewise.
* graphite-isl-ast-to-gimple.c (translate_isl_ast_node_user): Likewise.
* haifa-sched.c (sched_extend_luids): Likewise.
(extend_h_i_d): Likewise.
* insn-addr.h (insn_addresses_new): Likewise.
* ipa-cp.c (gather_context_independent_values): Likewise.
(find_more_contexts_for_caller_subset): Likewise.
* ipa-devirt.c (final_warning_record::grow_type_warnings): Likewise.
(ipa_odr_read_section): Likewise.
* ipa-fnsummary.c (evaluate_properties_for_edge): Likewise.
(ipa_fn_summary_t::duplicate): Likewise.
(analyze_function_body): Likewise.
(ipa_merge_fn_summary_after_inlining): Likewise.
(read_ipa_call_summary): Likewise.
* ipa-icf.c (sem_function::bb_dict_test): Likewise.
* ipa-prop.c (ipa_alloc_node_params): Likewise.
(parm_bb_aa_status_for_bb): Likewise.
(ipa_compute_jump_functions_for_edge): Likewise.
(ipa_analyze_node): Likewise.
(update_jump_functions_after_inlining): Likewise.
(ipa_read_edge_info): Likewise.
(read_ipcp_transformation_info): Likewise.
(ipcp_transform_function): Likewise.
* ipa-reference.c (ipa_reference_write_optimization_summary): Likewise.
* ipa-split.c (execute_split_functions): Likewise.
* ira.c (find_moveable_pseudos): Likewise.
* lower-subreg.c (decompose_multiword_subregs): Likewise.
* lto-streamer-in.c (input_eh_regions): Likewise.
(input_cfg): Likewise.
(input_struct_function_base): Likewise.
(input_function): Likewise.
* modulo-sched.c (set_node_sched_params): Likewise.
(extend_node_sched_params): Likewise.
(schedule_reg_moves): Likewise.
* omp-general.c (omp_construct_simd_compare): Likewise.
* passes.c (pass_manager::create_pass_tab): Likewise.
(enable_disable_pass): Likewise.
* predict.c (determine_unlikely_bbs): Likewise.
* profile.c (compute_branch_probabilities): Likewise.
* read-rtl-function.c (function_reader::parse_block): Likewise.
* read-rtl.c (rtx_reader::read_rtx_code): Likewise.
* reg-stack.c (stack_regs_mentioned): Likewise.
* regrename.c (regrename_init): Likewise.
* rtlanal.c (T>::add_single_to_queue): Likewise.
* sched-deps.c (init_deps_data_vector): Likewise.
* sel-sched-ir.c (sel_extend_global_bb_info): Likewise.
(extend_region_bb_info): Likewise.
(extend_insn_data): Likewise.
* symtab.c (symtab_node::create_reference): Likewise.
* tracer.c (tail_duplicate): Likewise.
* trans-mem.c (tm_region_init): Likewise.
(get_bb_regions_instrumented): Likewise.
* tree-cfg.c (init_empty_tree_cfg_for_function): Likewise.
(build_gimple_cfg): Likewise.
(create_bb): Likewise.
(move_block_to_fn): Likewise.
* tree-complex.c (tree_lower_complex): Likewise.
* tree-if-conv.c (predicate_rhs_code): Likewise.
* tree-inline.c (copy_bb): Likewise.
* tree-into-ssa.c (get_ssa_name_ann): Likewise.
(mark_phi_for_rewrite): Likewise.
* tree-object-size.c (compute_builtin_object_size): Likewise.
(init_object_sizes): Likewise.
* tree-predcom.c (initialize_root_vars_store_elim_1): Likewise.
(initialize_root_vars_store_elim_2): Likewise.
(prepare_initializers_chain_store_elim): Likewise.
* tree-ssa-address.c (addr_for_mem_ref): Likewise.
(multiplier_allowed_in_address_p): Likewise.
* tree-ssa-coalesce.c (ssa_conflicts_new): Likewise.
* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
* tree-ssa-loop-ivopts.c (addr_offset_valid_p): Likewise.
(get_address_cost_ainc): Likewise.
* tree-ssa-loop-niter.c (discover_iteration_bound_by_body_walk): Likewise.
* tree-ssa-pre.c (add_to_value): Likewise.
(phi_translate_1): Likewise.
(do_pre_regular_insertion): Likewise.
(do_pre_partial_partial_insertion): Likewise.
(init_pre): Likewise.
* tree-ssa-propagate.c (ssa_prop_init): Likewise.
(update_call_from_tree): Likewise.
* tree-ssa-reassoc.c (optimize_range_tests_cmp_bitwise): Likewise.
* tree-ssa-sccvn.c (vn_reference_lookup_3): Likewise.
(vn_reference_lookup_pieces): Likewise.
(eliminate_dom_walker::eliminate_push_avail): Likewise.
* tree-ssa-strlen.c (set_strinfo): Likewise.
(get_stridx_plus_constant): Likewise.
(zero_length_string): Likewise.
(find_equal_ptrs): Likewise.
(printf_strlen_execute): Likewise.
* tree-ssa-threadedge.c (set_ssa_name_value): Likewise.
* tree-ssanames.c (make_ssa_name_fn): Likewise.
* tree-streamer-in.c (streamer_read_tree_bitfields): Likewise.
* tree-vect-loop.c (vect_record_loop_mask): Likewise.
(vect_get_loop_mask): Likewise.
(vect_record_loop_len): Likewise.
(vect_get_loop_len): Likewise.
* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): Likewise.
* tree-vect-slp.c (vect_slp_convert_to_external): Likewise.
(vect_bb_slp_scalar_cost): Likewise.
(vect_bb_vectorization_profitable_p): Likewise.
(vectorizable_slp_permutation): Likewise.
* tree-vect-stmts.c (vectorizable_call): Likewise.
(vectorizable_simd_clone_call): Likewise.
(scan_store_can_perm_p): Likewise.
(vectorizable_store): Likewise.
* expr.c: Likewise.
* vec.c (test_safe_grow_cleared): Likewise.
* vec.h (vec_safe_grow): Likewise.
(vec_safe_grow_cleared): Likewise.
(vl_ptr>::safe_grow): Likewise.
(vl_ptr>::safe_grow_cleared): Likewise.
* config/c6x/c6x.c (insn_set_clock): Likewise.
2020-08-27 Richard Biener <rguenther@suse.de>
* tree-pretty-print.c (dump_mem_ref): Handle TARGET_MEM_REFs.
(dump_generic_node): Use dump_mem_ref also for TARGET_MEM_REF.
2020-08-27 Alex Coplan <alex.coplan@arm.com>
* lra-constraints.c (canonicalize_reload_addr): New.
(curr_insn_transform): Use canonicalize_reload_addr to ensure we
generate canonical RTL for an address reload.
2020-08-27 Zhiheng Xie <xiezhiheng@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for rounding intrinsics.
2020-08-27 Zhiheng Xie <xiezhiheng@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for min/max intrinsics.
2020-08-27 Richard Biener <rguenther@suse.de>
PR tree-optimization/96579
* tree-ssa-reassoc.c (linearize_expr_tree): If we expand
rhs via special ops make sure to swap operands.
2020-08-27 Richard Biener <rguenther@suse.de>
PR tree-optimization/96565
* tree-ssa-dse.c (dse_classify_store): Remove defs with
no uses from further processing.
2020-08-26 Göran Uddeborg <goeran@uddeborg.se>
PR gcov-profile/96285
* common.opt, doc/invoke.texi: Clarify wording of
-fprofile-exclude-files and adjust -fprofile-filter-files to
match.
2020-08-26 H.J. Lu <hjl.tools@gmail.com>
PR target/96802
* config/i386/i386-options.c (ix86_valid_target_attribute_inner_p):
Reject target("no-general-regs-only").
2020-08-26 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/constraints.md (K): Change unused constraint to
constraint to a const_int between 1 and 19.
(P): New constraint.
* config/msp430/msp430-protos.h (msp430x_logical_shift_right): Remove.
(msp430_expand_shift): New.
(msp430_output_asm_shift_insns): New.
* config/msp430/msp430.c (msp430_rtx_costs): Remove shift costs.
(CSH): Remove.
(msp430_expand_helper): Remove hard-coded generation of some inline
shift insns.
(use_helper_for_const_shift): New.
(msp430_expand_shift): New.
(msp430_output_asm_shift_insns): New.
(msp430_print_operand): Add new 'W' operand selector.
(msp430x_logical_shift_right): Remove.
* config/msp430/msp430.md (HPSI): New define_mode_iterator.
(HDI): Likewise.
(any_shift): New define_code_iterator.
(shift_insn): New define_code_attr.
Adjust unnamed insn patterns searched for by combine.
(ashlhi3): Remove.
(slli_1): Remove.
(430x_shift_left): Remove.
(slll_1): Remove.
(slll_2): Remove.
(ashlsi3): Remove.
(ashldi3): Remove.
(ashrhi3): Remove.
(srai_1): Remove.
(430x_arithmetic_shift_right): Remove.
(srap_1): Remove.
(srap_2): Remove.
(sral_1): Remove.
(sral_2): Remove.
(ashrsi3): Remove.
(ashrdi3): Remove.
(lshrhi3): Remove.
(srli_1): Remove.
(430x_logical_shift_right): Remove.
(srlp_1): Remove.
(srll_1): Remove.
(srll_2x): Remove.
(lshrsi3): Remove.
(lshrdi3): Remove.
(<shift_insn><mode>3): New define_expand.
(<shift_insn>hi3_430): New define_insn.
(<shift_insn>si3_const): Likewise.
(ashl<mode>3_430x): Likewise.
(ashr<mode>3_430x): Likewise.
(lshr<mode>3_430x): Likewise.
(*bitbranch<mode>4_z): Replace renamed predicate msp430_bitpos with
const_0_to_15_operand.
* config/msp430/msp430.opt: New option -mmax-inline-shift=.
* config/msp430/predicates.md (const_1_to_8_operand): New predicate.
(const_0_to_15_operand): Rename msp430_bitpos predicate.
(const_1_to_19_operand): New predicate.
* doc/invoke.texi: Document -mmax-inline-shift=.
2020-08-26 Aldy Hernandez <aldyh@redhat.com>
* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Abstract code out to...
* tree-vrp.c (find_case_label_range): ...here. Rewrite for to use irange
API.
(simplify_stmt_for_jump_threading): Call find_case_label_range instead of
duplicating the code in simplify_stmt_for_jump_threading.
* tree-vrp.h (find_case_label_range): New prototype.
2020-08-26 Richard Biener <rguenther@suse.de>
PR tree-optimization/96698
* tree-vectorizer.h (loop_vec_info::reduc_latch_defs): New.
(loop_vec_info::reduc_latch_slp_defs): Likewise.
* tree-vect-stmts.c (vect_transform_stmt): Only record
stmts to update PHI latches from, perform the update ...
* tree-vect-loop.c (vect_transform_loop): ... here after
vectorizing those PHIs.
(info_for_reduction): Properly handle non-reduction PHIs.
2020-08-26 Martin Liska <mliska@suse.cz>
* cgraphunit.c (process_symver_attribute): Match only symver
TREE_PURPOSE.
2020-08-26 Richard Biener <rguenther@suse.de>
PR tree-optimization/96783
* tree-vect-stmts.c (get_group_load_store_type): Use
VMAT_ELEMENTWISE for negative strides when we cannot
use VMAT_STRIDED_SLP.
2020-08-26 Martin Liska <mliska@suse.cz>
* doc/invoke.texi: Document how are pie and pic options merged.
2020-08-26 Zhiheng Xie <xiezhiheng@huawei.com>
* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for add/sub arithmetic intrinsics.
2020-08-26 Jakub Jelinek <jakub@redhat.com>
PR debug/96729
* dwarf2out.c (dwarf2out_next_real_insn): Adjust function comment.
(dwarf2out_var_location): Look for next_note only if next_real is
non-NULL, in that case look for the first non-deleted
NOTE_INSN_VAR_LOCATION between loc_note and next_real, if any.
2020-08-26 Iain Buclaw <ibuclaw@gdcproject.org>
* config/tilepro/gen-mul-tables.cc (main): Define IN_TARGET_CODE to 1
in the target file.
2020-08-26 Martin Liska <mliska@suse.cz>
* cgraphunit.c (process_symver_attribute): Allow multiple
symver attributes for one symbol.
* doc/extend.texi: Document the change.
2020-08-25 H.J. Lu <hjl.tools@gmail.com>
PR target/95863
* config/i386/i386.h (CTZ_DEFINED_VALUE_AT_ZERO): Return 0/2.
(CLZ_DEFINED_VALUE_AT_ZERO): Likewise.
2020-08-25 Roger Sayle <roger@nextmovesoftware.com>
PR middle-end/87256
* config/pa/pa.c (hppa_rtx_costs_shadd_p): New helper function
to check for coefficients supported by shNadd and shladd,l.
(hppa_rtx_costs): Rewrite to avoid using estimates based upon
FACTOR and enable recursing deeper into RTL expressions.
2020-08-25 Roger Sayle <roger@nextmovesoftware.com>
* config/pa/pa.md (ashldi3): Additionally, on !TARGET_64BIT
generate a two instruction shd/zdep sequence when shifting
registers by suitable constants.
(shd_internal): New define_expand to provide gen_shd_internal.
2020-08-25 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Rename
__ARM_FEATURE_SVE_VECTOR_OPERATIONS to
__ARM_FEATURE_SVE_VECTOR_OPERATORS.
2020-08-25 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64-sve-builtins.cc (add_sve_type_attribute):
Take the ACLE name of the type as a parameter and add it as fourth
argument to the "SVE type" attribute.
(register_builtin_types): Update call accordingly.
(register_tuple_type): Likewise. Construct the name of the type
earlier in order to do this.
(get_arm_sve_vector_bits_attributes): New function.
(handle_arm_sve_vector_bits_attribute): Report a more sensible
error message if the attribute is applied to an SVE tuple type.
Don't allow the attribute to be applied to an existing fixed-length
SVE type. Mangle the new type as __SVE_VLS<type, vector-bits>.
Add a dummy TYPE_DECL to the new type.
2020-08-25 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64-sve-builtins.cc (DEF_SVE_TYPE): Add a
leading "u" to each mangled name.
2020-08-25 Richard Biener <rguenther@suse.de>
PR tree-optimization/96548
PR tree-optimization/96760
* tree-ssa-loop-im.c (tree_ssa_lim): Recompute RPO after
store-motion.
2020-08-25 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96722
* gimple.c (infer_nonnull_range): Formatting fix.
(infer_nonnull_range_by_dereference): Return false for clobber stmts.
2020-08-25 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96758
* tree-ssa-strlen.c (handle_builtin_string_cmp): If both cstlen1
and cstlen2 are set, set cmpsiz to their minimum, otherwise use the
one that is set. If bound is used and smaller than cmpsiz, set cmpsiz
to bound. If both cstlen1 and cstlen2 are set, perform the optimization.
2020-08-25 Martin Jambor <mjambor@suse.cz>
PR tree-optimization/96730
* tree-sra.c (create_access): Disqualify any aggregate with negative
offset access.
(build_ref_for_model): Add assert that offset is non-negative.
2020-08-25 Wei Wentao <weiwt.fnst@cn.fujitsu.com>
* rtl.def: Fix typo in comment.
2020-08-25 Roger Sayle <roger@nextmovesoftware.com>
PR tree-optimization/21137
* fold-const.c (fold_binary_loc) [NE_EXPR/EQ_EXPR]: Call
STRIP_NOPS when checking whether to simplify ((x>>C1)&C2) != 0.
2020-08-25 Andrew Pinski <apinski@marvell.com>
PR middle-end/64242
* config/mips/mips.md (builtin_longjmp): Restore the frame
pointer and stack pointer and gp.
2020-08-25 Richard Biener <rguenther@suse.de>
PR debug/96690
* dwarf2out.c (reference_to_unused): Make FUNCTION_DECL
processing more consistent with respect to
symtab->global_info_ready.
(tree_add_const_value_attribute): Unconditionally call
rtl_for_decl_init to do all mangling early but throw
away the result if early_dwarf.
2020-08-25 Hongtao Liu <hongtao.liu@intel.com>
PR target/96755
* config/i386/sse.md: Correct the mode of NOT operands to
SImode.
2020-08-25 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96715
* match.pd (copysign(x,-x) -> -x): New simplification.
2020-08-25 Jakub Jelinek <jakub@redhat.com>
PR target/95450
* fold-const.c (native_interpret_real): For MODE_COMPOSITE_P modes
punt if the to be returned REAL_CST does not encode to the bitwise
same representation.
2020-08-24 Gerald Pfeifer <gerald@pfeifer.com>
* doc/install.texi (Configuration): Switch valgrind.com to https.
2020-08-24 Christophe Lyon <christophe.lyon@linaro.org>
PR target/94538
PR target/94538
* config/arm/thumb1.md: Disable set-constant splitter when
TARGET_HAVE_MOVT.
(thumb1_movsi_insn): Fix -mpure-code
alternative.
2020-08-24 Martin Liska <mliska@suse.cz>
* tree-vect-data-refs.c (dr_group_sort_cmp): Work on
data_ref_pair.
(vect_analyze_data_ref_accesses): Work on groups.
(vect_find_stmt_data_reference): Add group_id argument and fill
up dataref_groups vector.
* tree-vect-loop.c (vect_get_datarefs_in_loop): Pass new
arguments.
(vect_analyze_loop_2): Likewise.
* tree-vect-slp.c (vect_slp_analyze_bb_1): Pass argument.
(vect_slp_bb_region): Likewise.
(vect_slp_region): Likewise.
(vect_slp_bb):Work on the entire BB.
* tree-vectorizer.h (vect_analyze_data_ref_accesses): Add new
argument.
(vect_find_stmt_data_reference): Likewise.
2020-08-24 Martin Liska <mliska@suse.cz>
PR tree-optimization/96597
* tree-ssa-sccvn.c (vn_reference_lookup_call): Add missing
initialization of ::punned.
(vn_reference_insert): Use consistently false instead of 0.
(vn_reference_insert_pieces): Likewise.
2020-08-24 Hans-Peter Nilsson <hp@axis.com>
PR target/93372
* reorg.c (fill_slots_from_thread): Allow trial insns that clobber
TARGET_FLAGS_REGNUM as delay-slot fillers.
2020-08-23 H.J. Lu <hjl.tools@gmail.com>
PR target/96744
* config/i386/i386-options.c (IX86_ATTR_IX86_YES): New.
(IX86_ATTR_IX86_NO): Likewise.
(ix86_opt_type): Add ix86_opt_ix86_yes and ix86_opt_ix86_no.
(ix86_valid_target_attribute_inner_p): Handle general-regs-only,
ix86_opt_ix86_yes and ix86_opt_ix86_no.
(ix86_option_override_internal): Check opts->x_ix86_target_flags
instead of opts->x_ix86_target_flags.
* doc/extend.texi: Document target("general-regs-only") function
attribute.
2020-08-21 Richard Sandiford <richard.sandiford@arm.com>
* doc/extend.texi: Update links to Arm docs.
* doc/invoke.texi: Likewise.
2020-08-21 Hongtao Liu <hongtao.liu@intel.com>
PR target/96262
* config/i386/i386-expand.c
(ix86_expand_vec_shift_qihi_constant): Refine.
2020-08-21 Alex Coplan <alex.coplan@arm.com>
PR jit/63854
* gcc.c (set_static_spec): New.
(set_static_spec_owned): New.
(set_static_spec_shared): New.
(driver::maybe_putenv_COLLECT_LTO_WRAPPER): Use
set_static_spec_owned() to take ownership of lto_wrapper_file
such that it gets freed in driver::finalize.
(driver::maybe_run_linker): Use set_static_spec_shared() to
ensure that we don't try and free() the static string "ld",
also ensuring that any previously-allocated string in
linker_name_spec is freed. Likewise with argv0.
(driver::finalize): Use set_static_spec_shared() when resetting
specs that previously had allocated strings; remove if(0)
around call to free().
2020-08-21 Senthil Kumar Selvaraj <saaadhu@gcc.gnu.org>
* emit-rtl.c (try_split): Call copy_frame_info_to_split_insn
to split certain RTX_FRAME_RELATED_P insns.
* recog.c (copy_frame_info_to_split_insn): New function.
(peep2_attempt): Split copying of frame related info of
RTX_FRAME_RELATED_P insns into above function and call it.
* recog.h (copy_frame_info_to_split_insn): Declare it.
2020-08-21 liuhongt <hongtao.liu@intel.com>
PR target/88808
* config/i386/i386.c (ix86_preferred_reload_class): Allow
QImode data go into mask registers.
* config/i386/i386.md: (*movhi_internal): Adjust constraints
for mask registers.
(*movqi_internal): Ditto.
(*anddi_1): Support mask register operations
(*and<mode>_1): Ditto.
(*andqi_1): Ditto.
(*andn<mode>_1): Ditto.
(*<code><mode>_1): Ditto.
(*<code>qi_1): Ditto.
(*one_cmpl<mode>2_1): Ditto.
(*one_cmplsi2_1_zext): Ditto.
(*one_cmplqi2_1): Ditto.
(define_peephole2): Move constant 0/-1 directly into mask
registers.
* config/i386/predicates.md (mask_reg_operand): New predicate.
* config/i386/sse.md (define_split): Add post-reload splitters
that would convert "generic" patterns to mask patterns.
(*knotsi_1_zext): New define_insn.
2020-08-21 liuhongt <hongtao.liu@intel.com>
* config/i386/x86-tune-costs.h (skylake_cost): Adjust cost
model.
2020-08-21 liuhongt <hongtao.liu@intel.com>
* config/i386/i386.c (inline_secondary_memory_needed):
No memory is needed between mask regs and gpr.
(ix86_hard_regno_mode_ok): Add condition TARGET_AVX512F for
mask regno.
* config/i386/i386.h (enum reg_class): Add INT_MASK_REGS.
(REG_CLASS_NAMES): Ditto.
(REG_CLASS_CONTENTS): Ditto.
* config/i386/i386.md: Exclude mask register in
define_peephole2 which is avaiable only for gpr.
2020-08-21 H.J. Lu <hjl.tools@gmail.com>
PR target/71453
* config/i386/i386.h (struct processor_costs): Add member
mask_to_integer, integer_to_mask, mask_load[3], mask_store[3],
mask_move.
* config/i386/x86-tune-costs.h (ix86_size_cost, i386_cost,
i386_cost, pentium_cost, lakemont_cost, pentiumpro_cost,
geode_cost, k6_cost, athlon_cost, k8_cost, amdfam10_cost,
bdver_cost, znver1_cost, znver2_cost, skylake_cost,
btver1_cost, btver2_cost, pentium4_cost, nocona_cost,
atom_cost, slm_cost, intel_cost, generic_cost, core_cost):
Initialize mask_load[3], mask_store[3], mask_move,
integer_to_mask, mask_to_integer for all target costs.
* config/i386/i386.c (ix86_register_move_cost): Using cost
model of mask registers.
(inline_memory_move_cost): Ditto.
(ix86_register_move_cost): Ditto.
2020-08-20 Iain Buclaw <ibuclaw@gdcproject.org>
* config/vxworks.h (VXWORKS_ADDITIONAL_CPP_SPEC): Don't include
VxWorks header files if -fself-test is used.
(STARTFILE_PREFIX_SPEC): Avoid using VSB_DIR if -fself-test is used.
2020-08-20 Joe Ramsay <Joe.Ramsay@arm.com>
PR target/96683
* config/arm/mve.md (mve_vst1q_f<mode>): Require MVE memory operand for
destination.
(mve_vst1q_<supf><mode>): Likewise.
2020-08-19 2020-08-19 Carl Love <cel@us.ibm.com>
* config/rs6000/rs6000-builtin.def (BU_P10V_0, BU_P10V_1,
BU_P10V_2, BU_P10V_3): Rename BU_P10V_VSX_0, BU_P10V_VSX_1,
BU_P10V_VSX_2, BU_P10V_VSX_3 respectively.
(BU_P10V_4): Remove.
(BU_P10V_AV_0, BU_P10V_AV_1, BU_P10V_AV_2, BU_P10V_AV_3, BU_P10V_AV_4):
New definitions for Power 10 Altivec macros.
(VSTRIBR, VSTRIHR, VSTRIBL, VSTRIHL, VSTRIBR_P, VSTRIHR_P,
VSTRIBL_P, VSTRIHL_P, MTVSRBM, MTVSRHM, MTVSRWM, MTVSRDM, MTVSRQM,
VEXPANDMB, VEXPANDMH, VEXPANDMW, VEXPANDMD, VEXPANDMQ, VEXTRACTMB,
VEXTRACTMH, VEXTRACTMW, VEXTRACTMD, VEXTRACTMQ): Replace macro
expansion BU_P10V_1 with BU_P10V_AV_1.
(VCLRLB, VCLRRB, VCFUGED, VCLZDM, VCTZDM, VPDEPD, VPEXTD, VGNB,
VCNTMBB, VCNTMBH, VCNTMBW, VCNTMBD): Replace macro expansion
BU_P10V_2 with BU_P10V_AV_2.
(VEXTRACTBL, VEXTRACTHL, VEXTRACTWL, VEXTRACTDL, VEXTRACTBR, VEXTRACTHR,
VEXTRACTWR, VEXTRACTDR, VINSERTGPRBL, VINSERTGPRHL, VINSERTGPRWL,
VINSERTGPRDL, VINSERTVPRBL, VINSERTVPRHL, VINSERTVPRWL, VINSERTGPRBR,
VINSERTGPRHR, VINSERTGPRWR, VINSERTGPRDR, VINSERTVPRBR, VINSERTVPRHR,
VINSERTVPRWR, VREPLACE_ELT_V4SI, VREPLACE_ELT_UV4SI, VREPLACE_ELT_V2DF,
VREPLACE_ELT_V4SF, VREPLACE_ELT_V2DI, VREPLACE_ELT_UV2DI, VREPLACE_UN_V4SI,
VREPLACE_UN_UV4SI, VREPLACE_UN_V4SF, VREPLACE_UN_V2DI, VREPLACE_UN_UV2DI,
VREPLACE_UN_V2DF, VSLDB_V16QI, VSLDB_V8HI, VSLDB_V4SI, VSLDB_V2DI,
VSRDB_V16QI, VSRDB_V8HI, VSRDB_V4SI, VSRDB_V2DI): Replace macro expansion
BU_P10V_3 with BU_P10V_AV_3.
(VXXSPLTIW_V4SI, VXXSPLTIW_V4SF, VXXSPLTID): Replace macro expansion
BU_P10V_1 with BU_P10V_AV_1.
(XXGENPCVM_V16QI, XXGENPCVM_V8HI, XXGENPCVM_V4SI, XXGENPCVM_V2DI):
Replace macro expansion BU_P10V_2 with BU_P10V_VSX_2.
(VXXSPLTI32DX_V4SI, VXXSPLTI32DX_V4SF, VXXBLEND_V16QI, VXXBLEND_V8HI,
VXXBLEND_V4SI, VXXBLEND_V2DI, VXXBLEND_V4SF, VXXBLEND_V2DF): Replace macor
expansion BU_P10V_3 with BU_P10V_VSX_3.
(XXEVAL, VXXPERMX): Replace macro expansion BU_P10V_4 with BU_P10V_VSX_4.
(XVCVBF16SP, XVCVSPBF16): Replace macro expansion BU_VSX_1 with
BU_P10V_VSX_1. Also change MISC to CONST.
* config/rs6000/rs6000-c.c: (P10_BUILTIN_VXXPERMX): Replace with
P10V_BUILTIN_VXXPERMX.
(P10_BUILTIN_VCLRLB, P10_BUILTIN_VCLRLB, P10_BUILTIN_VCLRRB,
P10_BUILTIN_VGNB, P10_BUILTIN_XXEVAL, P10_BUILTIN_VXXPERMX,
P10_BUILTIN_VEXTRACTBL, P10_BUILTIN_VEXTRACTHL, P10_BUILTIN_VEXTRACTWL,
P10_BUILTIN_VEXTRACTDL, P10_BUILTIN_VINSERTGPRHL,
P10_BUILTIN_VINSERTGPRWL, P10_BUILTIN_VINSERTGPRDL,
P10_BUILTIN_VINSERTVPRBL, P10_BUILTIN_VINSERTVPRHL,
P10_BUILTIN_VEXTRACTBR, P10_BUILTIN_VEXTRACTHR,
P10_BUILTIN_VEXTRACTWR, P10_BUILTIN_VEXTRACTDR,
P10_BUILTIN_VINSERTGPRBR, P10_BUILTIN_VINSERTGPRHR,
P10_BUILTIN_VINSERTGPRWR, P10_BUILTIN_VINSERTGPRDR,
P10_BUILTIN_VINSERTVPRBR, P10_BUILTIN_VINSERTVPRHR,
P10_BUILTIN_VINSERTVPRWR, P10_BUILTIN_VREPLACE_ELT_UV4SI,
P10_BUILTIN_VREPLACE_ELT_V4SI, P10_BUILTIN_VREPLACE_ELT_UV2DI,
P10_BUILTIN_VREPLACE_ELT_V2DI, P10_BUILTIN_VREPLACE_ELT_V2DF,
P10_BUILTIN_VREPLACE_UN_UV4SI, P10_BUILTIN_VREPLACE_UN_V4SI,
P10_BUILTIN_VREPLACE_UN_V4SF, P10_BUILTIN_VREPLACE_UN_UV2DI,
P10_BUILTIN_VREPLACE_UN_V2DI, P10_BUILTIN_VREPLACE_UN_V2DF,
P10_BUILTIN_VSLDB_V16QI, P10_BUILTIN_VSLDB_V16QI,
P10_BUILTIN_VSLDB_V8HI, P10_BUILTIN_VSLDB_V4SI,
P10_BUILTIN_VSLDB_V2DI, P10_BUILTIN_VXXSPLTIW_V4SI,
P10_BUILTIN_VXXSPLTIW_V4SF, P10_BUILTIN_VXXSPLTID,
P10_BUILTIN_VXXSPLTI32DX_V4SI, P10_BUILTIN_VXXSPLTI32DX_V4SF,
P10_BUILTIN_VXXBLEND_V16QI, P10_BUILTIN_VXXBLEND_V8HI,
P10_BUILTIN_VXXBLEND_V4SI, P10_BUILTIN_VXXBLEND_V2DI,
P10_BUILTIN_VXXBLEND_V4SF, P10_BUILTIN_VXXBLEND_V2DF,
P10_BUILTIN_VSRDB_V16QI, P10_BUILTIN_VSRDB_V8HI,
P10_BUILTIN_VSRDB_V4SI, P10_BUILTIN_VSRDB_V2DI,
P10_BUILTIN_VSTRIBL, P10_BUILTIN_VSTRIHL,
P10_BUILTIN_VSTRIBL_P, P10_BUILTIN_VSTRIHL_P,
P10_BUILTIN_VSTRIBR, P10_BUILTIN_VSTRIHR,
P10_BUILTIN_VSTRIBR_P, P10_BUILTIN_VSTRIHR_P,
P10_BUILTIN_MTVSRBM, P10_BUILTIN_MTVSRHM,
P10_BUILTIN_MTVSRWM, P10_BUILTIN_MTVSRDM,
P10_BUILTIN_MTVSRQM, P10_BUILTIN_VCNTMBB,
P10_BUILTIN_VCNTMBH, P10_BUILTIN_VCNTMBW,
P10_BUILTIN_VCNTMBD, P10_BUILTIN_VEXPANDMB,
P10_BUILTIN_VEXPANDMH, P10_BUILTIN_VEXPANDMW,
P10_BUILTIN_VEXPANDMD, P10_BUILTIN_VEXPANDMQ,
P10_BUILTIN_VEXTRACTMB, P10_BUILTIN_VEXTRACTMH,
P10_BUILTIN_VEXTRACTMW, P10_BUILTIN_VEXTRACTMD,
P10_BUILTIN_VEXTRACTMQ, P10_BUILTIN_XVTLSBB_ZEROS,
P10_BUILTIN_XVTLSBB_ONES): Replace with
P10V_BUILTIN_VCLRLB, P10V_BUILTIN_VCLRLB, P10V_BUILTIN_VCLRRB,
P10V_BUILTIN_VGNB, P10V_BUILTIN_XXEVAL, P10V_BUILTIN_VXXPERMX,
P10V_BUILTIN_VEXTRACTBL, P10V_BUILTIN_VEXTRACTHL, P10V_BUILTIN_VEXTRACTWL,
P10V_BUILTIN_VEXTRACTDL, P10V_BUILTIN_VINSERTGPRHL,
P10V_BUILTIN_VINSERTGPRWL, P10V_BUILTIN_VINSERTGPRDL,
P10V_BUILTIN_VINSERTVPRBL,P10V_BUILTIN_VINSERTVPRHL,
P10V_BUILTIN_VEXTRACTBR, P10V_BUILTIN_VEXTRACTHR
P10V_BUILTIN_VEXTRACTWR, P10V_BUILTIN_VEXTRACTDR,
P10V_BUILTIN_VINSERTGPRBR, P10V_BUILTIN_VINSERTGPRHR,
P10V_BUILTIN_VINSERTGPRWR, P10V_BUILTIN_VINSERTGPRDR,
P10V_BUILTIN_VINSERTVPRBR, P10V_BUILTIN_VINSERTVPRHR,
P10V_BUILTIN_VINSERTVPRWR, P10V_BUILTIN_VREPLACE_ELT_UV4SI,
P10V_BUILTIN_VREPLACE_ELT_V4SI, P10V_BUILTIN_VREPLACE_ELT_UV2DI,
P10V_BUILTIN_VREPLACE_ELT_V2DI, P10V_BUILTIN_VREPLACE_ELT_V2DF,
P10V_BUILTIN_VREPLACE_UN_UV4SI, P10V_BUILTIN_VREPLACE_UN_V4SI,
P10V_BUILTIN_VREPLACE_UN_V4SF, P10V_BUILTIN_VREPLACE_UN_UV2DI,
P10V_BUILTIN_VREPLACE_UN_V2DI, P10V_BUILTIN_VREPLACE_UN_V2DF,
P10V_BUILTIN_VSLDB_V16QI, P10V_BUILTIN_VSLDB_V16QI,
P10V_BUILTIN_VSLDB_V8HI, P10V_BUILTIN_VSLDB_V4SI,
P10V_BUILTIN_VSLDB_V2DI, P10V_BUILTIN_VXXSPLTIW_V4SI,
P10V_BUILTIN_VXXSPLTIW_V4SF, P10V_BUILTIN_VXXSPLTID,
P10V_BUILTIN_VXXSPLTI32DX_V4SI, P10V_BUILTIN_VXXSPLTI32DX_V4SF,
P10V_BUILTIN_VXXBLEND_V16QI, P10V_BUILTIN_VXXBLEND_V8HI,
P10V_BUILTIN_VXXBLEND_V4SI, P10V_BUILTIN_VXXBLEND_V2DI,
P10V_BUILTIN_VXXBLEND_V4SF, P10V_BUILTIN_VXXBLEND_V2DF,
P10V_BUILTIN_VSRDB_V16QI, P10V_BUILTIN_VSRDB_V8HI,
P10V_BUILTIN_VSRDB_V4SI, P10V_BUILTIN_VSRDB_V2DI,
P10V_BUILTIN_VSTRIBL, P10V_BUILTIN_VSTRIHL,
P10V_BUILTIN_VSTRIBL_P, P10V_BUILTIN_VSTRIHL_P,
P10V_BUILTIN_VSTRIBR, P10V_BUILTIN_VSTRIHR,
P10V_BUILTIN_VSTRIBR_P, P10V_BUILTIN_VSTRIHR_P,
P10V_BUILTIN_MTVSRBM, P10V_BUILTIN_MTVSRHM,
P10V_BUILTIN_MTVSRWM, P10V_BUILTIN_MTVSRDM,
P10V_BUILTIN_MTVSRQM, P10V_BUILTIN_VCNTMBB,
P10V_BUILTIN_VCNTMBH, P10V_BUILTIN_VCNTMBW,
P10V_BUILTIN_VCNTMBD, P10V_BUILTIN_VEXPANDMB,
P10V_BUILTIN_VEXPANDMH, P10V_BUILTIN_VEXPANDMW,
P10V_BUILTIN_VEXPANDMD, P10V_BUILTIN_VEXPANDMQ,
P10V_BUILTIN_VEXTRACTMB, P10V_BUILTIN_VEXTRACTMH,
P10V_BUILTIN_VEXTRACTMW, P10V_BUILTIN_VEXTRACTMD,
P10V_BUILTIN_VEXTRACTMQ, P10V_BUILTIN_XVTLSBB_ZEROS,
P10V_BUILTIN_XVTLSBB_ONES respectively.
* config/rs6000/rs6000-call.c: Ditto above, change P10_BUILTIN_name to
P10V_BUILTIN_name.
(P10_BUILTIN_XVCVSPBF16, P10_BUILTIN_XVCVBF16SP): Change to
P10V_BUILTIN_XVCVSPBF16, P10V_BUILTIN_XVCVBF16SP respectively.
2020-08-19 Bill Schmidt <wschmidt@linux.ibm.com>
* config/rs6000/rs6000-logue.c (rs6000_decl_ok_for_sibcall):
Sibcalls are always legal when the caller doesn't preserve r2.
2020-08-19 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-expand.c (ix86_expand_builtin)
[case IX86_BUILTIN_ENQCMD, case IX86_BUILTIN_ENQCMDS]:
Rewrite expansion to use code_for_enqcmd.
[case IX86_BUILTIN_WRSSD, case IX86_BUILTIN_WRSSQ]:
Rewrite expansion to use code_for_wrss.
[case IX86_BUILTIN_WRUSSD, case IX86_BUILTIN_WRUSSD]:
Rewrite expansion to use code_for_wrss.
2020-08-19 Feng Xue <fxue@os.amperecomputing.com>
PR tree-optimization/94234
* match.pd ((PTR_A + OFF) - (PTR_B + OFF)) -> (PTR_A - PTR_B): New
simplification.
2020-08-19 H.J. Lu <hjl.tools@gmail.com>
* common/config/i386/cpuinfo.h (get_intel_cpu): Detect Rocket
Lake and Alder Lake.
2020-08-19 Peixin Qiao <qiaopeixin@huawei.com>
* config/aarch64/aarch64.c (aarch64_init_cumulative_args): Remove
"fndecl && TREE_PUBLIC (fndecl)" check since it prevents the funtion
type check when calling via a function pointer or when calling a static
function.
2020-08-19 Kewen Lin <linkw@linux.ibm.com>
* opts-global.c (decode_options): Call target_option_override_hook
before it prints for --help=*.
2020-08-18 Peter Bergner <bergner@linux.ibm.com>
* config/rs6000/rs6000-builtin.def (BU_VSX_1): Rename xvcvbf16sp to
xvcvbf16spn.
* config/rs6000/rs6000-call.c (builtin_function_type): Likewise.
* config/rs6000/vsx.md: Likewise.
* doc/extend.texi: Likewise.
2020-08-18 Aaron Sawdey <acsawdey@linux.ibm.com>
* config/rs6000/rs6000-string.c (gen_lxvl_stxvl_move):
Helper function.
(expand_block_move): Add lxvl/stxvl, vector pair, and
unaligned VSX.
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Default value for -mblock-ops-vector-pair.
* config/rs6000/rs6000.opt: Add -mblock-ops-vector-pair.
2020-08-18 Aldy Hernandez <aldyh@redhat.com>
* vr-values.c (check_for_binary_op_overflow): Change type of store
to range_query.
(vr_values::adjust_range_with_scev): Abstract most of the code...
(range_of_var_in_loop): ...here. Remove value_range_equiv uses.
(simplify_using_ranges::simplify_using_ranges): Change type of store
to range_query.
* vr-values.h (class range_query): New.
(class simplify_using_ranges): Use range_query.
(class vr_values): Add OVERRIDE to get_value_range.
(range_of_var_in_loop): New.
2020-08-18 Martin Sebor <msebor@redhat.com>
PR middle-end/96665
PR middle-end/78257
* expr.c (convert_to_bytes): Replace statically allocated buffer with
a dynamically allocated one of sufficient size.
2020-08-18 Martin Sebor <msebor@redhat.com>
PR tree-optimization/96670
PR middle-end/78257
* gimple-fold.c (gimple_fold_builtin_memchr): Call byte_representation
to get it, not string_constant.
2020-08-18 Hu Jiangping <hujiangping@cn.fujitsu.com>
* doc/gimple.texi (gimple_debug_begin_stmt_p): Add return type.
(gimple_debug_inline_entry_p, gimple_debug_nonbind_marker_p): Likewise.
2020-08-18 Martin Sebor <msebor@redhat.com>
* fold-const.c (native_encode_expr): Update comment.
2020-08-18 Uroš Bizjak <ubizjak@gmail.com>
PR target/96536
* config/i386/i386.md (restore_stack_nonlocal): Add missing compare
RTX. Rewrite expander to use high-level functions in RTL construction.
2020-08-18 liuhongt <hongtao.liu@intel.com>
PR target/96562
PR target/93897
* config/i386/i386-expand.c (ix86_expand_pinsr): Don't use
pinsr for TImode.
(ix86_expand_pextr): Don't use pextr for TImode.
2020-08-17 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-builtin.def (__builtin_ia32_bextri_u32)
(__builtin_ia32_bextri_u64): Use CODE_FOR_nothing.
* config/i386/i386.md (@tbm_bextri_<mode>):
Implement as parametrized name pattern.
(@rdrand<mode>): Ditto.
(@rdseed<mode>): Ditto.
* config/i386/i386-expand.c (ix86_expand_builtin)
[case IX86_BUILTIN_BEXTRI32, case IX86_BUILTIN_BEXTRI64]:
Update for parameterized name patterns.
[case IX86_BUILTIN_RDRAND16_STEP, case IX86_BUILTIN_RDRAND32_STEP]
[case IX86_BUILTIN_RDRAND64_STEP]: Ditto.
[case IX86_BUILTIN_RDSEED16_STEP, case IX86_BUILTIN_RDSEED32_STEP]
[case IX86_BUILTIN_RDSEED64_STEP]: Ditto.
2020-08-17 Aldy Hernandez <aldyh@redhat.com>
* vr-values.c (vr_values::get_value_range): Add stmt param.
(vr_values::extract_range_from_comparison): Same.
(vr_values::extract_range_from_assignment): Pass stmt to
extract_range_from_comparison.
(vr_values::adjust_range_with_scev): Pass stmt to get_value_range.
(simplify_using_ranges::vrp_evaluate_conditional): Add stmt param.
Pass stmt to get_value_range.
(simplify_using_ranges::vrp_visit_cond_stmt): Pass stmt to
get_value_range.
(simplify_using_ranges::simplify_abs_using_ranges): Same.
(simplify_using_ranges::simplify_div_or_mod_using_ranges): Same.
(simplify_using_ranges::simplify_bit_ops_using_ranges): Same.
(simplify_using_ranges::simplify_cond_using_ranges_1): Same.
(simplify_using_ranges::simplify_switch_using_ranges): Same.
(simplify_using_ranges::simplify_float_conversion_using_ranges): Same.
* vr-values.h (class vr_values): Add stmt arg to
vrp_evaluate_conditional_warnv_with_ops.
Add stmt arg to extract_range_from_comparison and get_value_range.
(simplify_using_ranges::get_value_range): Add stmt arg.
2020-08-17 liuhongt <hongtao.liu@intel.com>
PR target/96350
* config/i386/i386.c (ix86_legitimate_constant_p): Return
false for ENDBR immediate.
(ix86_legitimate_address_p): Ditto.
* config/i386/predicates.md
(x86_64_immediate_operand): Exclude ENDBR immediate.
(x86_64_zext_immediate_operand): Ditto.
(x86_64_dwzext_immediate_operand): Ditto.
(ix86_endbr_immediate_operand): New predicate.
2020-08-16 Roger Sayle <roger@nextmovesoftware.com>
* simplify-rtx.c (simplify_unary_operation_1) [SIGN_EXTEND]:
Simplify (sign_extend:M (truncate:N (lshiftrt:M x C))) to
(ashiftrt:M x C) when the shift sets the high bits appropriately.
2020-08-14 Martin Sebor <msebor@redhat.com>
PR middle-end/78257
* builtins.c (expand_builtin_memory_copy_args): Rename called function.
(expand_builtin_stpcpy_1): Remove argument from call.
(expand_builtin_memcmp): Rename called function.
(inline_expand_builtin_bytecmp): Same.
* expr.c (convert_to_bytes): New function.
(constant_byte_string): New function (formerly string_constant).
(string_constant): Call constant_byte_string.
(byte_representation): New function.
* expr.h (byte_representation): Declare.
* fold-const-call.c (fold_const_call): Rename called function.
* fold-const.c (c_getstr): Remove an argument.
(getbyterep): Define a new function.
* fold-const.h (c_getstr): Remove an argument.
(getbyterep): Declare a new function.
* gimple-fold.c (gimple_fold_builtin_memory_op): Rename callee.
(gimple_fold_builtin_string_compare): Same.
(gimple_fold_builtin_memchr): Same.
2020-08-14 David Malcolm <dmalcolm@redhat.com>
* doc/analyzer.texi (Overview): Add tip about how to get a
gimple dump if the analyzer ICEs.
2020-08-14 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-builtin.def (__builtin_ia32_llwpcb)
(__builtin_ia32_slwpcb, __builtin_ia32_lwpval32)
(__builtin_ia32_lwpval64, __builtin_ia32_lwpins32)
(__builtin_ia32_lwpins64): Use CODE_FOR_nothing.
* config/i386/i386.md (@lwp_llwpcb<mode>):
Implement as parametrized name pattern.
(@lwp_slwpcb<mode>): Ditto.
(@lwp_lwpval<mode>): Ditto.
(@lwp_lwpins<mode>): Ditto.
* config/i386/i386-expand.c (ix86_expand_special_args_builtin)
[case VOID_FTYPE_UINT_UINT_UINT, case VOID_FTYPE_UINT64_UINT_UINT]
[case UCHAR_FTYPE_UINT_UINT_UINT, case UCHAR_FTYPE_UINT64_UINT_UINT]:
Remove.
(ix86_expand_builtin)
[ case IX86_BUILTIN_LLWPCB, case IX86_BUILTIN_LLWPCB]:
Update for parameterized name patterns.
[case IX86_BUILTIN_LWPVAL32, case IX86_BUILTIN_LWPVAL64]
[case IX86_BUILTIN_LWPINS32, case IX86_BUILTIN_LWPINS64]: Expand here.
2020-08-14 Lewis Hyatt <lhyatt@gmail.com>
* common.opt: Add new option -fdiagnostics-plain-output.
* doc/invoke.texi: Document it.
* opts-common.c (decode_cmdline_options_to_array): Implement it.
(decode_cmdline_option): Add missing const qualifier to argv.
2020-08-14 Jakub Jelinek <jakub@redhat.com>
Jonathan Wakely <jwakely@redhat.com>
Jonathan Wakely <jwakely@redhat.com>
* system.h: Include type_traits.
* vec.h (vec<T, A, vl_embed>::embedded_size): Use offsetof and asserts
on vec_stdlayout, which is conditionally a vec (for standard layout T)
and otherwise vec_embedded.
2020-08-14 Jojo R <jiejie_rong@c-sky.com>
* config/csky/csky-elf.h (ASM_SPEC): Use mfloat-abi.
* config/csky/csky-linux-elf.h (ASM_SPEC): mfloat-abi.
2020-08-13 David Malcolm <dmalcolm@redhat.com>
PR analyzer/93032
PR analyzer/93938
PR analyzer/94011
PR analyzer/94099
PR analyzer/94399
PR analyzer/94458
PR analyzer/94503
PR analyzer/94640
PR analyzer/94688
PR analyzer/94689
PR analyzer/94839
PR analyzer/95026
PR analyzer/95042
PR analyzer/95240
* Makefile.in (ANALYZER_OBJS): Add analyzer/region.o,
analyzer/region-model-impl-calls.o,
analyzer/region-model-manager.o,
analyzer/region-model-reachability.o, analyzer/store.o, and
analyzer/svalue.o.
* doc/analyzer.texi: Update for changes to analyzer
implementation.
* tristate.h (tristate::get_value): New accessor.
2020-08-13 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386-builtin.def (CET_NORMAL): Merge to CET BDESC array.
(__builtin_ia32_rddspd, __builtin_ia32_rddspq, __builtin_ia32_incsspd)
(__builtin_ia32_incsspq, __builtin_ia32_wrssd, __builtin_ia32_wrssq)
(__builtin_ia32_wrussd, __builtin_ia32_wrussq): Use CODE_FOR_nothing.
* config/i386/i386-builtins.c: Remove handling of CET_NORMAL builtins.
* config/i386/i386.md (@rdssp<mode>): Implement as parametrized
name pattern. Use SWI48 mode iterator. Introduce input operand
and remove explicit XOR zeroing from insn template.
(@incssp<mode>): Implement as parametrized name pattern.
Use SWI48 mode iterator.
(@wrss<mode>): Ditto.
(@wruss<mode>): Ditto.
(rstorssp): Remove expander. Rename insn pattern from *rstorssp<mode>.
Use DImode memory operand.
(clrssbsy): Remove expander. Rename insn pattern from *clrssbsy<mode>.
Use DImode memory operand.
(save_stack_nonlocal): Update for parametrized name patterns.
Use cleared register as an argument to gen_rddsp.
(restore_stack_nonlocal): Update for parametrized name patterns.
* config/i386/i386-expand.c (ix86_expand_builtin):
[case IX86_BUILTIN_RDSSPD, case IX86_BUILTIN_RDSSPQ]: Expand here.
[case IX86_BUILTIN_INCSSPD, case IX86_BUILTIN_INCSSPQ]: Ditto.
[case IX86_BUILTIN_RSTORSSP, case IX86_BUILTIN_CLRSSBSY]:
Generate DImode memory operand.
[case IX86_BUILTIN_WRSSD, case IX86_BUILTIN_WRSSQ]
[case IX86_BUILTIN_WRUSSD, case IX86_BUILTIN_WRUSSD]:
Update for parameterized name patterns.
2020-08-13 Peter Bergner <bergner@linux.ibm.com>
PR target/96506
* config/rs6000/rs6000-call.c (rs6000_promote_function_mode): Disallow
MMA types as return values.
(rs6000_function_arg): Disallow MMA types as function arguments.
2020-08-13 Richard Sandiford <richard.sandiford@arm.com>
Revert:
2020-08-12 Peixin Qiao <qiaopeixin@huawei.com>
* config/aarch64/aarch64.c (aarch64_function_value): Add if
condition to check ag_mode after entering if condition of
aarch64_vfp_is_call_or_return_candidate. If TARGET_FLOAT is
set as false by -mgeneral-regs-only, report the diagnostic
information of -mgeneral-regs-only imcompatible with the use
of fp/simd register(s).
2020-08-13 Martin Liska <mliska@suse.cz>
PR ipa/96482
* ipa-cp.c (ipcp_bits_lattice::meet_with_1): Mask m_value
with m_mask.
2020-08-13 Jakub Jelinek <jakub@redhat.com>
* gimplify.c (gimplify_omp_taskloop_expr): New function.
(gimplify_omp_for): Use it. For OMP_FOR_NON_RECTANGULAR
loops adjust in outer taskloop the var-outer decls.
* omp-expand.c (expand_omp_taskloop_for_inner): Handle non-rectangular
loops.
(expand_omp_for): Don't reject non-rectangular taskloop.
* omp-general.c (omp_extract_for_data): Don't assert that
non-rectangular loops have static schedule, instead treat loop->m1
or loop->m2 as if loop->n1 or loop->n2 is non-constant.
2020-08-13 Hongtao Liu <hongtao.liu@intel.com>
PR target/96246
* config/i386/sse.md (<avx512>_load<mode>_mask,
<avx512>_load<mode>_mask): Extend to generate blendm
instructions.
(<avx512>_blendm<mode>, <avx512>_blendm<mode>): Change
define_insn to define_expand.
2020-08-12 Roger Sayle <roger@nextmovesoftware.com>
Uroš Bizjak <ubizjak@gmail.com>
PR target/96558
* config/i386/i386.md (peephole2): Only reorder register clearing
instructions to allow use of xor for general registers.
2020-08-12 Martin Liska <mliska@suse.cz>
PR ipa/96482
* ipa-cp.c (ipcp_bits_lattice::meet_with_1): Drop value bits
for bits that are unknown.
(ipcp_bits_lattice::set_to_constant): Likewise.
* tree-ssa-ccp.c (get_default_value): Add sanity check that
IPA CP bit info has all bits set to zero in bits that
are unknown.
2020-08-12 Peixin Qiao <qiaopeixin@huawei.com>
* config/aarch64/aarch64.c (aarch64_function_value): Add if
condition to check ag_mode after entering if condition of
aarch64_vfp_is_call_or_return_candidate. If TARGET_FLOAT is
set as false by -mgeneral-regs-only, report the diagnostic
information of -mgeneral-regs-only imcompatible with the use
of fp/simd register(s).
2020-08-12 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96535
* toplev.c (process_options): Move flag_unroll_loops and
flag_cunroll_grow_size handling from here to ...
* opts.c (finish_options): ... here. For flag_cunroll_grow_size,
don't check for AUTODETECT_VALUE, but instead check
opts_set->x_flag_cunroll_grow_size.
* common.opt (funroll-completely-grow-size): Default to 0.
* config/rs6000/rs6000.c (TARGET_OVERRIDE_OPTIONS_AFTER_CHANGE):
Redefine.
(rs6000_override_options_after_change): New function.
(rs6000_option_override_internal): Call it. Move there the
flag_cunroll_grow_size, unroll_only_small_loops and
flag_rename_registers handling.
2020-08-12 Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.c (nvptx_assemble_decl_begin): Make elt_size an
unsigned HOST_WIDE_INT. Print init_frag.remaining using
HOST_WIDE_INT_PRINT_UNSIGNED.
2020-08-12 Roger Sayle <roger@nextmovesoftware.com>
Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386.md (peephole2): Reduce unnecessary
register shuffling produced by register allocation.
2020-08-12 Aldy Hernandez <aldyh@redhat.com>
* ipa-fnsummary.c (evaluate_conditions_for_known_args): Use vec<>
instead of std::vector<>.
(evaluate_properties_for_edge): Same.
(ipa_fn_summary_t::duplicate): Same.
(estimate_ipcp_clone_size_and_time): Same.
* vec.h (<T, A, vl_embed>::embedded_size): Change vec_embedded
type to contain a char[].
2020-08-12 Andreas Krebbel <krebbel@linux.ibm.com>
PR target/96308
* config/s390/s390.c (s390_cannot_force_const_mem): Reject an
unary minus for everything not being a numeric constant.
(legitimize_tls_address): Move a NEG out of the CONST rtx.
2020-08-12 Andreas Krebbel <krebbel@linux.ibm.com>
PR target/96456
* config/s390/s390.h (TARGET_NONSIGNALING_VECTOR_COMPARE_OK): New
macro.
* config/s390/vector.md (vcond_comparison_operator): Use new macro
for the check.
2020-08-11 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/96539
* expr.c (emit_block_move_hints): Don't copy anything if x and y
are the same and neither is MEM_VOLATILE_P.
2020-08-11 Jakub Jelinek <jakub@redhat.com>
PR c/96549
* tree.c (get_narrower): Use TREE_TYPE (ret) instead of
TREE_TYPE (win) for COMPOUND_EXPRs.
2020-08-11 Jan Hubicka <hubicka@ucw.cz>
* predict.c (not_loop_guard_equal_edge_p): New function.
(maybe_predict_edge): New function.
(predict_paths_for_bb): Use it.
(predict_paths_leading_to_edge): Use it.
2020-08-11 Martin Liska <mliska@suse.cz>
* dbgcnt.def (DEBUG_COUNTER): Add ipa_cp_bits.
* ipa-cp.c (ipcp_store_bits_results): Use it when we store known
bits for parameters.
2020-08-10 Marek Polacek <polacek@redhat.com>
* doc/sourcebuild.texi: Document dg-ice.
2020-08-10 Roger Sayle <roger@nextmovesoftware.com>
* config/i386/i386-expand.c (ix86_expand_int_movcc): Expand
signed MIN_EXPR against zero as "x < 0 ? x : 0" instead of
"x <= 0 ? x : 0" to enable sign_bit_compare_p optimizations.
2020-08-10 Aldy Hernandez <aldyh@redhat.com>
* value-range.h (gt_ggc_mx): Declare inline.
(gt_pch_nx): Same.
2020-08-10 Marc Glisse <marc.glisse@inria.fr>
PR tree-optimization/95433
* match.pd (X * C1 == C2): Handle wrapping overflow.
* expr.c (maybe_optimize_mod_cmp): Qualify call to mod_inv.
(mod_inv): Move...
* wide-int.cc (mod_inv): ... here.
* wide-int.h (mod_inv): Declare it.
2020-08-10 Jan Hubicka <hubicka@ucw.cz>
* predict.c (filter_predictions): Document semantics of filter.
(equal_edge_p): Rename to ...
(not_equal_edge_p): ... this; reverse semantics.
(remove_predictions_associated_with_edge): Fix.
2020-08-10 Hongtao Liu <hongtao.liu@intel.com>
PR target/96243
* config/i386/i386-expand.c (ix86_expand_sse_cmp): Refine for
maskcmp.
(ix86_expand_mask_vec_cmp): Change prototype.
* config/i386/i386-protos.h (ix86_expand_mask_vec_cmp): Change prototype.
* config/i386/i386.c (ix86_print_operand): Remove operand
modifier 'I'.
* config/i386/sse.md
(*<avx512>_cmp<mode>3<mask_scalar_merge_name><round_saeonly_name>): Deleted.
(*<avx512>_cmp<mode>3<mask_scalar_merge_name>): Ditto.
(*<avx512>_ucmp<mode>3<mask_scalar_merge_name>): Ditto.
(*<avx512>_ucmp<mode>3<mask_scalar_merge_name>,
avx512f_maskcmp<mode>3): Ditto.
2020-08-09 Roger Sayle <roger@nextmovesoftware.com>
* expmed.c (init_expmed_one_conv): Restore all->reg's mode.
(init_expmed_one_mode): Set all->reg to desired mode.
2020-08-08 Peter Bergner <bergner@linux.ibm.com>
PR target/96530
* config/rs6000/rs6000.c (rs6000_invalid_conversion): Use canonical
types for type comparisons. Refactor code to simplify it.
2020-08-08 Jakub Jelinek <jakub@redhat.com>
PR fortran/93553
* tree-nested.c (convert_nonlocal_omp_clauses): For
OMP_CLAUSE_REDUCTION, OMP_CLAUSE_LASTPRIVATE and OMP_CLAUSE_LINEAR
save info->new_local_var_chain around walks of the clause gimple
sequences and declare_vars if needed into the sequence.
2020-08-08 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96424
* omp-expand.c: Include tree-eh.h.
(expand_omp_for_init_vars): Handle -fexceptions -fnon-call-exceptions
by forcing floating point comparison into a bool temporary.
2020-08-07 Marc Glisse <marc.glisse@inria.fr>
* generic-match-head.c (optimize_vectors_before_lowering_p): New
function.
* gimple-match-head.c (optimize_vectors_before_lowering_p):
Likewise.
* match.pd ((v ? w : 0) ? a : b, c1 ? c2 ? a : b : b): Use it.
2020-08-07 Richard Biener <rguenther@suse.de>
PR tree-optimization/96514
* tree-if-conv.c (if_convertible_bb_p): If the last stmt
is a call that is control-altering, fail.
2020-08-07 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/bpf/bpf.md: Remove trailing whitespaces.
* config/bpf/constraints.md: Likewise.
* config/bpf/predicates.md: Likewise.
2020-08-07 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000.md (bswaphi2_reg): Add ISA 3.1 support.
(bswapsi2_reg): Add ISA 3.1 support.
(bswapdi2): Rename bswapdi2_xxbrd to bswapdi2_brd.
(bswapdi2_brd,bswapdi2_xxbrd): Rename. Add ISA 3.1 support.
2020-08-07 Alan Modra <amodra@gmail.com>
PR target/96493
* config/rs6000/predicates.md (current_file_function_operand): Don't
accept functions that differ in r2 usage.
2020-08-06 Hans-Peter Nilsson <hp@bitrange.com>
* config/mmix/mmix.md (MM): New mode_iterator.
("mov<mode>"): New expander to expand for all MM-modes.
("*movqi_expanded", "*movhi_expanded", "*movsi_expanded")
("*movsf_expanded", "*movdf_expanded"): Rename from the
corresponding mov<M> named pattern. Add to the condition that
either operand must be a register_operand.
("*movdi_expanded"): Similar, but also allow STCO in the condition.
2020-08-06 Richard Sandiford <richard.sandiford@arm.com>
PR target/96191
* config/arm/arm.md (arm_stack_protect_test_insn): Zero out
operand 2 after use.
* config/arm/thumb1.md (thumb1_stack_protect_test_insn): Likewise.
2020-08-06 Peter Bergner <bergner@linux.ibm.com>
PR target/96446
* config/rs6000/mma.md (*movpxi): Add xxsetaccz generation.
Disable split for zero constant source operand.
(mma_xxsetaccz): Change to define_expand. Call gen_movpxi.
2020-08-06 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/96480
* tree-ssa-reassoc.c (suitable_cond_bb): Add TEST_SWAPPED_P argument.
If TEST_BB ends in cond and has one edge to *OTHER_BB and another
through an empty bb to that block too, if PHI args don't match, retry
them through the other path from TEST_BB.
(maybe_optimize_range_tests): Adjust callers. Handle such LAST_BB
through inversion of the condition.
2020-08-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/bpf/bpf-helpers.h (KERNEL_HELPER): Define.
(KERNEL_VERSION): Remove.
* config/bpf/bpf-helpers.def: Delete.
* config/bpf/bpf.c (bpf_handle_fndecl_attribute): New function.
(bpf_attribute_table): Define.
(bpf_helper_names): Delete.
(bpf_helper_code): Likewise.
(enum bpf_builtins): Adjust to new helpers mechanism.
(bpf_output_call): Likewise.
(bpf_init_builtins): Likewise.
(bpf_init_builtins): Likewise.
* doc/extend.texi (BPF Function Attributes): New section.
(BPF Kernel Helpers): Delete section.
2020-08-06 Richard Biener <rguenther@suse.de>
PR tree-optimization/96491
* tree-ssa-sink.c (sink_common_stores_to_bb): Avoid
sinking across abnormal edges.
2020-08-06 Richard Biener <rguenther@suse.de>
PR tree-optimization/96483
* tree-ssa-pre.c (create_component_ref_by_pieces_1): Handle
POLY_INT_CST.
2020-08-06 Richard Biener <rguenther@suse.de>
* graphite-isl-ast-to-gimple.c (ivs_params): Use hash_map instead
of std::map.
(ivs_params_clear): Adjust.
(gcc_expression_from_isl_ast_expr_id): Likewise.
(graphite_create_new_loop): Likewise.
(add_parameters_to_ivs_params): Likewise.
2020-08-06 Roger Sayle <roger@nextmovesoftware.com>
Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386.md (MAXMIN_IMODE): No longer needed.
(<maxmin><mode>3): Support SWI248 and general_operand for
second operand, when TARGET_CMOVE.
(<maxmin><mode>3_1 splitter): Optimize comparisons against
0, 1 and -1 to use "test" instead of "cmp".
(*<maxmin>di3_doubleword): Likewise, allow general_operand
and enable on TARGET_CMOVE.
(peephole2): Convert clearing a register after a flag setting
instruction into an xor followed by the original flag setter.
2020-08-06 Gerald Pfeifer <gerald@pfeifer.com>
* ipa-fnsummary.c (INCLUDE_VECTOR): Define.
Remove direct inclusion of <vector>.
2020-08-06 Kewen Lin <linkw@gcc.gnu.org>
* config/rs6000/rs6000.c (rs6000_adjust_vect_cost_per_loop): New
function.
(rs6000_finish_cost): Call rs6000_adjust_vect_cost_per_loop.
* tree-vect-loop.c (vect_estimate_min_profitable_iters): Add cost
modeling for vector with length.
(vect_rgroup_iv_might_wrap_p): New function, factored out from...
* tree-vect-loop-manip.c (vect_set_loop_controls_directly): ...this.
Update function comment.
* tree-vect-stmts.c (vect_gen_len): Update function comment.
* tree-vectorizer.h (vect_rgroup_iv_might_wrap_p): New declare.
2020-08-06 Kewen Lin <linkw@linux.ibm.com>
* tree-vectorizer.c (try_vectorize_loop_1): Skip the epilogue loops
for dbgcnt check.
2020-08-05 Marc Glisse <marc.glisse@inria.fr>
PR tree-optimization/95906
PR target/70314
* match.pd ((c ? a : b) op d, (c ? a : b) op (c ? d : e),
(v ? w : 0) ? a : b, c1 ? c2 ? a : b : b): New transformations.
(op (c ? a : b)): Update to match the new transformations.
2020-08-05 Richard Sandiford <richard.sandiford@arm.com>
PR target/96191
* config/aarch64/aarch64.md (stack_protect_test_<mode>): Set the
CC register directly, instead of a GPR. Replace the original GPR
destination with an extra scratch register. Zero out operand 3
after use.
(stack_protect_test): Update accordingly.
2020-08-05 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64.md (load_pair_sw_<SX:mode><SX2:mode>)
(load_pair_dw_<DX:mode><DX2:mode>, load_pair_dw_tftf)
(store_pair_sw_<SX:mode><SX2:mode>)
(store_pair_dw_<DX:mode><DX2:mode>, store_pair_dw_tftf)
(*load_pair_extendsidi2_aarch64)
(*load_pair_zero_extendsidi2_aarch64): Use %z for the memory operand.
* config/aarch64/aarch64-simd.md (load_pair<DREG:mode><DREG2:mode>)
(vec_store_pair<DREG:mode><DREG2:mode>, load_pair<VQ:mode><VQ2:mode>)
(vec_store_pair<VQ:mode><VQ2:mode>): Likewise.
2020-08-05 Richard Biener <rguenther@suse.de>
* tree-ssa-loop-im.c (invariantness_dom_walker): Remove.
(invariantness_dom_walker::before_dom_children): Move to ...
(compute_invariantness): ... this function.
(move_computations): Inline ...
(tree_ssa_lim): ... here, share RPO order and avoid some
cfun references.
(analyze_memory_references): Remove sorting of location
lists, instead assert they are sorted already when checking.
(prev_flag_edges): Remove.
(execute_sm_if_changed): Pass down and adjust prev edge state.
(execute_sm_exit): Likewise.
(hoist_memory_references): Likewise. Commit edge insertions
of each processed exit.
(store_motion_loop): Do not commit edge insertions on all
edges in the function.
(tree_ssa_lim_initialize): Do not call alloc_aux_for_edges.
(tree_ssa_lim_finalize): Do not call free_aux_for_edges.
2020-08-05 Richard Biener <rguenther@suse.de>
* genmatch.c (fail_label): New global.
(expr::gen_transform): Branch to fail_label instead of
returning. Fix indent of call argument checking.
(dt_simplify::gen_1): Compute and emit fail_label, branch
to it instead of returning early.
2020-08-05 Jakub Jelinek <jakub@redhat.com>
* omp-expand.c (expand_omp_for): Don't disallow combined non-rectangular
loops.
2020-08-05 Jakub Jelinek <jakub@redhat.com>
PR middle-end/96459
* omp-low.c (lower_omp_taskreg): Call lower_reduction_clauses even in
for host teams.
2020-08-05 Jakub Jelinek <jakub@redhat.com>
* omp-expand.c (expand_omp_for_init_counts): Remember
first_inner_iterations, factor and n1o from the number of iterations
computation in *fd.
(expand_omp_for_init_vars): Use more efficient logical iteration number
to actual iterator values computation even for non-rectangular loops
where number of loop iterations could not be computed at compile time.
2020-08-05 2020-08-04 Carl Love <cel@us.ibm.com>
* config/rs6000/altivec.h (vec_blendv, vec_permx): Add define.
* config/rs6000/altivec.md (UNSPEC_XXBLEND, UNSPEC_XXPERMX.): New
unspecs.
(VM3): New define_mode.
(VM3_char): New define_attr.
(xxblend_<mode> mode VM3): New define_insn.
(xxpermx): New define_expand.
(xxpermx_inst): New define_insn.
* config/rs6000/rs6000-builtin.def (VXXBLEND_V16QI, VXXBLEND_V8HI,
VXXBLEND_V4SI, VXXBLEND_V2DI, VXXBLEND_V4SF, VXXBLEND_V2DF): New
BU_P10V_3 definitions.
(XXBLEND): New BU_P10_OVERLOAD_3 definition.
(XXPERMX): New BU_P10_OVERLOAD_4 definition.
* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
(P10_BUILTIN_VXXPERMX): Add if statement.
* config/rs6000/rs6000-call.c (P10_BUILTIN_VXXBLEND_V16QI,
P10_BUILTIN_VXXBLEND_V8HI, P10_BUILTIN_VXXBLEND_V4SI,
P10_BUILTIN_VXXBLEND_V2DI, P10_BUILTIN_VXXBLEND_V4SF,
P10_BUILTIN_VXXBLEND_V2DF, P10_BUILTIN_VXXPERMX): Define
overloaded arguments.
(rs6000_expand_quaternop_builtin): Add if case for CODE_FOR_xxpermx.
(builtin_quaternary_function_type): Add v16uqi_type and xxpermx_type
variables, add case statement for P10_BUILTIN_VXXPERMX.
(builtin_function_type): Add case statements for
P10_BUILTIN_VXXBLEND_V16QI, P10_BUILTIN_VXXBLEND_V8HI,
P10_BUILTIN_VXXBLEND_V4SI, P10_BUILTIN_VXXBLEND_V2DI.
* doc/extend.texi: Add documentation for vec_blendv and vec_permx.
2020-08-05 2020-08-04 Carl Love <cel@us.ibm.com>
* config/rs6000/altivec.h (vec_splati, vec_splatid, vec_splati_ins):
Add defines.
* config/rs6000/altivec.md (UNSPEC_XXSPLTIW, UNSPEC_XXSPLTID,
UNSPEC_XXSPLTI32DX): New.
(vxxspltiw_v4si, vxxspltiw_v4sf_inst, vxxspltidp_v2df_inst,
vxxsplti32dx_v4si_inst, vxxsplti32dx_v4sf_inst): New define_insn.
(vxxspltiw_v4sf, vxxspltidp_v2df, vxxsplti32dx_v4si,
vxxsplti32dx_v4sf.): New define_expands.
* config/rs6000/predicates.md (u1bit_cint_operand,
s32bit_cint_operand, c32bit_cint_operand): New predicates.
* config/rs6000/rs6000-builtin.def (VXXSPLTIW_V4SI, VXXSPLTIW_V4SF,
VXXSPLTID): New definitions.
(VXXSPLTI32DX_V4SI, VXXSPLTI32DX_V4SF): New BU_P10V_3
definitions.
(XXSPLTIW, XXSPLTID): New definitions.
(XXSPLTI32DX): Add definitions.
* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_XXSPLTIW,
P10_BUILTIN_VEC_XXSPLTID, P10_BUILTIN_VEC_XXSPLTI32DX):
New definitions.
* config/rs6000/rs6000-protos.h (rs6000_constF32toI32): New extern
declaration.
* config/rs6000/rs6000.c (rs6000_constF32toI32): New function.
* doc/extend.texi: Add documentation for vec_splati,
vec_splatid, and vec_splati_ins.
2020-08-05 2020-08-04 Carl Love <cel@us.ibm.com>
* config/rs6000/altivec.h (vec_sldb, vec_srdb): New defines.
* config/rs6000/altivec.md (UNSPEC_SLDB, UNSPEC_SRDB): New.
(SLDB_lr): New attribute.
(VSHIFT_DBL_LR): New iterator.
(vs<SLDB_lr>db_<mode>): New define_insn.
* config/rs6000/rs6000-builtin.def (VSLDB_V16QI, VSLDB_V8HI,
VSLDB_V4SI, VSLDB_V2DI, VSRDB_V16QI, VSRDB_V8HI, VSRDB_V4SI,
VSRDB_V2DI): New BU_P10V_3 definitions.
(SLDB, SRDB): New BU_P10_OVERLOAD_3 definitions.
* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_SLDB,
P10_BUILTIN_VEC_SRDB): New definitions.
(rs6000_expand_ternop_builtin) [CODE_FOR_vsldb_v16qi,
CODE_FOR_vsldb_v8hi, CODE_FOR_vsldb_v4si, CODE_FOR_vsldb_v2di,
CODE_FOR_vsrdb_v16qi, CODE_FOR_vsrdb_v8hi, CODE_FOR_vsrdb_v4si,
CODE_FOR_vsrdb_v2di]: Add clauses.
* doc/extend.texi: Add description for vec_sldb and vec_srdb.
2020-08-05 2020-08-04 Carl Love <cel@us.ibm.com>
* config/rs6000/altivec.h: Add define for vec_replace_elt and
vec_replace_unaligned.
* config/rs6000/vsx.md (UNSPEC_REPLACE_ELT, UNSPEC_REPLACE_UN): New
unspecs.
(REPLACE_ELT): New mode iterator.
(REPLACE_ELT_char, REPLACE_ELT_sh, REPLACE_ELT_max): New mode attributes.
(vreplace_un_<mode>, vreplace_elt_<mode>_inst): New.
* config/rs6000/rs6000-builtin.def (VREPLACE_ELT_V4SI,
VREPLACE_ELT_UV4SI, VREPLACE_ELT_V4SF, VREPLACE_ELT_UV2DI,
VREPLACE_ELT_V2DF, VREPLACE_UN_V4SI, VREPLACE_UN_UV4SI,
VREPLACE_UN_V4SF, VREPLACE_UN_V2DI, VREPLACE_UN_UV2DI,
VREPLACE_UN_V2DF, (REPLACE_ELT, REPLACE_UN, VREPLACE_ELT_V2DI): New builtin
entries.
* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_REPLACE_ELT,
P10_BUILTIN_VEC_REPLACE_UN): New builtin argument definitions.
(rs6000_expand_quaternop_builtin): Add 3rd argument checks for
CODE_FOR_vreplace_elt_v4si, CODE_FOR_vreplace_elt_v4sf,
CODE_FOR_vreplace_un_v4si, CODE_FOR_vreplace_un_v4sf.
(builtin_function_type) [P10_BUILTIN_VREPLACE_ELT_UV4SI,
P10_BUILTIN_VREPLACE_ELT_UV2DI, P10_BUILTIN_VREPLACE_UN_UV4SI,
P10_BUILTIN_VREPLACE_UN_UV2DI]: New cases.
* doc/extend.texi: Add description for vec_replace_elt and
vec_replace_unaligned builtins.
2020-08-05 2020-08-04 Carl Love <cel@us.ibm.com>
* config/rs6000/altivec.h (vec_insertl, vec_inserth): New defines.
* config/rs6000/rs6000-builtin.def (VINSERTGPRBL, VINSERTGPRHL,
VINSERTGPRWL, VINSERTGPRDL, VINSERTVPRBL, VINSERTVPRHL, VINSERTVPRWL,
VINSERTGPRBR, VINSERTGPRHR, VINSERTGPRWR, VINSERTGPRDR, VINSERTVPRBR,
VINSERTVPRHR, VINSERTVPRWR): New builtins.
(INSERTL, INSERTH): New builtins.
* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_INSERTL,
P10_BUILTIN_VEC_INSERTH): New overloaded definitions.
(P10_BUILTIN_VINSERTGPRBL, P10_BUILTIN_VINSERTGPRHL,
P10_BUILTIN_VINSERTGPRWL, P10_BUILTIN_VINSERTGPRDL,
P10_BUILTIN_VINSERTVPRBL, P10_BUILTIN_VINSERTVPRHL,
P10_BUILTIN_VINSERTVPRWL): Add case entries.
* config/rs6000/vsx.md (define_c_enum): Add UNSPEC_INSERTL,
UNSPEC_INSERTR.
(define_expand): Add vinsertvl_<mode>, vinsertvr_<mode>,
vinsertgl_<mode>, vinsertgr_<mode>, mode is VI2.
(define_ins): vinsertvl_internal_<mode>, vinsertvr_internal_<mode>,
vinsertgl_internal_<mode>, vinsertgr_internal_<mode>, mode VEC_I.
* doc/extend.texi: Add documentation for vec_insertl, vec_inserth.
2020-08-05 2020-08-04 Carl Love <cel@us.ibm.com>
* config/rs6000/altivec.md: (UNSPEC_EXTRACTL, UNSPEC_EXTRACTR)
(vextractl<mode>, vextractr<mode>)
(vextractl<mode>_internal, vextractr<mode>_internal for mode VI2)
(VI2): Move to ...
* config/rs6000/vsx.md: (UNSPEC_EXTRACTL, UNSPEC_EXTRACTR)
(vextractl<mode>, vextractr<mode>)
(vextractl<mode>_internal, vextractr<mode>_internal for mode VI2)
(VI2): ..here.
* doc/extend.texi: Update documentation for vec_extractl.
Replace builtin name vec_extractr with vec_extracth. Update
description of vec_extracth.
2020-08-04 Jim Wilson <jimw@sifive.com>
* doc/invoke.texi (AArch64 Options): Delete duplicate
-mstack-protector-guard docs.
2020-08-04 Roger Sayle <roger@nextmovesoftware.com>
* config/nvptx/nvptx.md (smulhi3_highpart, smulsi3_highpart)
(umulhi3_highpart, umulsi3_highpart): New instructions.
2020-08-04 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn-run.c (R_AMDGPU_NONE): Delete.
(R_AMDGPU_ABS32_LO): Delete.
(R_AMDGPU_ABS32_HI): Delete.
(R_AMDGPU_ABS64): Delete.
(R_AMDGPU_REL32): Delete.
(R_AMDGPU_REL64): Delete.
(R_AMDGPU_ABS32): Delete.
(R_AMDGPU_GOTPCREL): Delete.
(R_AMDGPU_GOTPCREL32_LO): Delete.
(R_AMDGPU_GOTPCREL32_HI): Delete.
(R_AMDGPU_REL32_LO): Delete.
(R_AMDGPU_REL32_HI): Delete.
(reserved): Delete.
(R_AMDGPU_RELATIVE64): Delete.
2020-08-04 Omar Tahir <omar.tahir@arm.com>
* config/arm/arm-cpus.in (armv8.1-m.main): Tune for Cortex-M55.
2020-08-04 Hu Jiangping <hujiangping@cn.fujitsu.com>
* config/aarch64/aarch64.c (aarch64_if_then_else_costs): Delete
redundant extra_cost variable.
2020-08-04 Zhiheng Xie <xiezhiheng@huawei.com>
* config/aarch64/aarch64-builtins.c (aarch64_call_properties):
Use FLOAT_MODE_P macro instead of enumerating all floating-point
modes and add global flag FLAG_AUTO_FP.
2020-08-04 Jakub Jelinek <jakub@redhat.com>
* doc/extend.texi (symver): Add @cindex for symver function attribute.
2020-08-04 Marc Glisse <marc.glisse@inria.fr>
PR tree-optimization/95433
* match.pd (X * C1 == C2): New transformation.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* gimple-ssa-sprintf.c (get_int_range): Adjust for irange API.
(format_integer): Same.
(handle_printf_call): Same.
2020-08-04 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn.md ("<expander>ti3"): New.
2020-08-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/88240
* tree-ssa-sccvn.h (vn_reference_s::punned): New flag.
* tree-ssa-sccvn.c (vn_reference_insert): Initialize punned.
(vn_reference_insert_pieces): Likewise.
(visit_reference_op_call): Likewise.
(visit_reference_op_load): Track whether a ref was punned.
* tree-ssa-pre.c (do_hoist_insertion): Refuse to perform hoist
insertion on punned floating point loads.
2020-08-04 Sudakshina Das <sudi.das@arm.com>
* config/aarch64/aarch64.c (aarch64_gen_store_pair): Add case
for E_V4SImode.
(aarch64_gen_load_pair): Likewise.
(aarch64_copy_one_block_and_progress_pointers): Handle 256 bit copy.
(aarch64_expand_cpymem): Expand copy_limit to 256bits where
appropriate.
2020-08-04 Andrea Corallo <andrea.corallo@arm.com>
* config/aarch64/aarch64.md (aarch64_fjcvtzs): Add missing
clobber.
* doc/sourcebuild.texi (aarch64_fjcvtzs_hw) Document new
target supports option.
2020-08-04 Tom de Vries <tdevries@suse.de>
PR target/96428
* config/nvptx/nvptx.c (nvptx_gen_shuffle): Handle V2SI/V2DI.
2020-08-04 Jakub Jelinek <jakub@redhat.com>
PR middle-end/96426
* tree-vect-generic.c (expand_vector_conversion): Replace .VEC_CONVERT
call with GIMPLE_NOP if there is no lhs.
2020-08-04 Jakub Jelinek <jakub@redhat.com>
PR debug/96354
* gimple-fold.c (maybe_canonicalize_mem_ref_addr): Add IS_DEBUG
argument. Return false instead of gcc_unreachable if it is true and
get_addr_base_and_unit_offset returns NULL.
(fold_stmt_1) <case GIMPLE_DEBUG>: Adjust caller.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* vr-values.c (simplify_using_ranges::vrp_evaluate_conditional):
Call is_gimple_min_invariant dropped from previous patch.
2020-08-04 Jakub Jelinek <jakub@redhat.com>
* omp-expand.c (expand_omp_for_init_counts): For triangular loops
compute number of iterations at runtime more efficiently.
(expand_omp_for_init_vars): Adjust immediate dominators.
(extract_omp_for_update_vars): Likewise.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* vr-values.c (simplify_using_ranges::two_valued_val_range_p):
Use irange API.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* vr-values.c (simplify_conversion_using_ranges): Convert to irange API.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* vr-values.c (test_for_singularity): Use irange API.
(simplify_using_ranges::simplify_cond_using_ranges_1): Do not
special case VR_RANGE.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* vr-values.c (simplify_using_ranges::vrp_evaluate_conditional): Adjust
for irange API.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* vr-values.c (simplify_using_ranges::op_with_boolean_value_range_p): Adjust
for irange API.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* tree-ssanames.c (get_range_info): Use irange instead of value_range.
* tree-ssanames.h (get_range_info): Same.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* fold-const.c (expr_not_equal_to): Adjust for irange API.
2020-08-04 Aldy Hernandez <aldyh@redhat.com>
* builtins.c (determine_block_size): Remove ad-hoc range canonicalization.
2020-08-04 Xionghu Luo <luoxhu@linux.ibm.com>
PR rtl-optimization/71309
* dse.c (find_shift_sequence): Use subreg of shifted from high part
register to avoid loading from address.
2020-08-03 Jonathan Wakely <jwakely@redhat.com>
* doc/cpp.texi (Variadic Macros): Use the exact ... token in
code examples.
2020-08-03 Nathan Sidwell <nathan@acm.org>
* doc/invoke.texi: Refer to c++20
2020-08-03 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
* gimplify.c (gimplify_omp_target_update): Allow GOMP_MAP_TO_PSET
without a preceding data-movement mapping.
2020-08-03 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.h (ASM_DECLARE_FUNCTION_NAME): UNDEF before
use.
(DEF_MIN_OSX_VERSION): Only define if there's no existing
def.
2020-08-03 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (IN_TARGET_CODE): Remove.
(darwin_mergeable_constant_section): Handle poly-int machine modes.
(machopic_select_rtx_section): Likewise.
2020-08-03 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/96430
* range-op.cc (operator_tests): Do not shift by 31 on targets with
integer's smaller than 32 bits.
2020-08-03 Martin Jambor <mjambor@suse.cz>
* hsa-brig-format.h: Moved to brig/brigfrontend.
* hsa-brig.c: Removed.
* hsa-builtins.def: Likewise.
* hsa-common.c: Likewise.
* hsa-common.h: Likewise.
* hsa-dump.c: Likewise.
* hsa-gen.c: Likewise.
* hsa-regalloc.c: Likewise.
* ipa-hsa.c: Likewise.
* omp-grid.c: Likewise.
* omp-grid.h: Likewise.
* Makefile.in (BUILTINS_DEF): Remove hsa-builtins.def.
(OBJS): Remove hsa-common.o, hsa-gen.o, hsa-regalloc.o, hsa-brig.o,
hsa-dump.o, ipa-hsa.c and omp-grid.o.
(GTFILES): Removed hsa-common.c and omp-expand.c.
* builtins.def: Remove processing of hsa-builtins.def.
(DEF_HSA_BUILTIN): Remove.
* common.opt (flag_disable_hsa): Remove.
(-Whsa): Ignore.
* config.in (ENABLE_HSA): Removed.
* configure.ac: Removed handling configuration for hsa offloading.
(ENABLE_HSA): Removed.
* configure: Regenerated.
* doc/install.texi (--enable-offload-targets): Remove hsa from the
example.
(--with-hsa-runtime): Reword to reference any HSA run-time, not
specifically HSA offloading.
* doc/invoke.texi (Option Summary): Remove -Whsa.
(Warning Options): Likewise.
(Optimize Options): Remove hsa-gen-debug-stores.
* doc/passes.texi (Regular IPA passes): Remove section on IPA HSA
pass.
* gimple-low.c (lower_stmt): Remove GIMPLE_OMP_GRID_BODY case.
* gimple-pretty-print.c (dump_gimple_omp_for): Likewise.
(dump_gimple_omp_block): Likewise.
(pp_gimple_stmt_1): Likewise.
* gimple-walk.c (walk_gimple_stmt): Likewise.
* gimple.c (gimple_build_omp_grid_body): Removed function.
(gimple_copy): Remove GIMPLE_OMP_GRID_BODY case.
* gimple.def (GIMPLE_OMP_GRID_BODY): Removed.
* gimple.h (gf_mask): Removed GF_OMP_PARALLEL_GRID_PHONY,
OMP_FOR_KIND_GRID_LOOP, GF_OMP_FOR_GRID_PHONY,
GF_OMP_FOR_GRID_INTRA_GROUP, GF_OMP_FOR_GRID_GROUP_ITER and
GF_OMP_TEAMS_GRID_PHONY. Renumbered GF_OMP_FOR_KIND_SIMD and
GF_OMP_TEAMS_HOST.
(gimple_build_omp_grid_body): Removed declaration.
(gimple_has_substatements): Remove GIMPLE_OMP_GRID_BODY case.
(gimple_omp_for_grid_phony): Removed.
(gimple_omp_for_set_grid_phony): Likewise.
(gimple_omp_for_grid_intra_group): Likewise.
(gimple_omp_for_grid_intra_group): Likewise.
(gimple_omp_for_grid_group_iter): Likewise.
(gimple_omp_for_set_grid_group_iter): Likewise.
(gimple_omp_parallel_grid_phony): Likewise.
(gimple_omp_parallel_set_grid_phony): Likewise.
(gimple_omp_teams_grid_phony): Likewise.
(gimple_omp_teams_set_grid_phony): Likewise.
(CASE_GIMPLE_OMP): Remove GIMPLE_OMP_GRID_BODY case.
* lto-section-in.c (lto_section_name): Removed hsa.
* lto-streamer.h (lto_section_type): Removed LTO_section_ipa_hsa.
* lto-wrapper.c (compile_images_for_offload_targets): Remove special
handling of hsa.
* omp-expand.c: Do not include hsa-common.h and gt-omp-expand.h.
(parallel_needs_hsa_kernel_p): Removed.
(grid_launch_attributes_trees): Likewise.
(grid_launch_attributes_trees): Likewise.
(grid_create_kernel_launch_attr_types): Likewise.
(grid_insert_store_range_dim): Likewise.
(grid_get_kernel_launch_attributes): Likewise.
(get_target_arguments): Remove code passing HSA grid sizes.
(grid_expand_omp_for_loop): Remove.
(grid_arg_decl_map): Likewise.
(grid_remap_kernel_arg_accesses): Likewise.
(grid_expand_target_grid_body): Likewise.
(expand_omp): Remove call to grid_expand_target_grid_body.
(omp_make_gimple_edges): Remove GIMPLE_OMP_GRID_BODY case.
* omp-general.c: Do not include hsa-common.h.
(omp_maybe_offloaded): Do not check for HSA offloading.
(omp_context_selector_matches): Likewise.
* omp-low.c: Do not include hsa-common.h and omp-grid.h.
(build_outer_var_ref): Remove handling of GIMPLE_OMP_GRID_BODY.
(scan_sharing_clauses): Remove handling of OMP_CLAUSE__GRIDDIM_.
(scan_omp_parallel): Remove handling of the phoney variant.
(check_omp_nesting_restrictions): Remove handling of
GIMPLE_OMP_GRID_BODY and GF_OMP_FOR_KIND_GRID_LOOP.
(scan_omp_1_stmt): Remove handling of GIMPLE_OMP_GRID_BODY.
(lower_omp_for_lastprivate): Remove handling of gridified loops.
(lower_omp_for): Remove phony loop handling.
(lower_omp_taskreg): Remove phony construct handling.
(lower_omp_teams): Likewise.
(lower_omp_grid_body): Removed.
(lower_omp_1): Remove GIMPLE_OMP_GRID_BODY case.
(execute_lower_omp): Do not call omp_grid_gridify_all_targets.
* opts.c (common_handle_option): Do not handle hsa when processing
OPT_foffload_.
* params.opt (hsa-gen-debug-stores): Remove.
* passes.def: Remove pass_ipa_hsa and pass_gen_hsail.
* timevar.def: Remove TV_IPA_HSA.
* toplev.c: Do not include hsa-common.h.
(compile_file): Do not call hsa_output_brig.
* tree-core.h (enum omp_clause_code): Remove OMP_CLAUSE__GRIDDIM_.
(tree_omp_clause): Remove union field dimension.
* tree-nested.c (convert_nonlocal_omp_clauses): Remove the
OMP_CLAUSE__GRIDDIM_ case.
(convert_local_omp_clauses): Likewise.
* tree-pass.h (make_pass_gen_hsail): Remove declaration.
(make_pass_ipa_hsa): Likewise.
* tree-pretty-print.c (dump_omp_clause): Remove GIMPLE_OMP_GRID_BODY
case.
* tree.c (omp_clause_num_ops): Remove the element corresponding to
OMP_CLAUSE__GRIDDIM_.
(omp_clause_code_name): Likewise.
(walk_tree_1): Remove GIMPLE_OMP_GRID_BODY case.
* tree.h (OMP_CLAUSE__GRIDDIM__DIMENSION): Remove.
(OMP_CLAUSE__GRIDDIM__SIZE): Likewise.
(OMP_CLAUSE__GRIDDIM__GROUP): Likewise.
2020-08-03 Bu Le <bule1@huawei.com>
* config/aarch64/aarch64-sve.md (sub<mode>3): Add support for
unpacked vectors.
2020-08-03 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.h (ASM_SPEC): Don't pass on "-md" option.
2020-08-03 Yunde Zhong <zhongyunde@huawei.com>
PR rtl-optimization/95696
* regrename.c (regrename_analyze): New param include_all_block_p
with default value TRUE. If set to false, avoid disrupting SMS
schedule.
* regrename.h (regrename_analyze): Adjust prototype.
2020-08-03 Wei Wentao <weiwt.fnst@cn.fujitsu.com>
* doc/tm.texi.in (VECTOR_STORE_FLAG_VALUE): Fix a typo.
* doc/tm.texi: Regenerate.
2020-08-03 Richard Sandiford <richard.sandiford@arm.com>
* doc/invoke.texi: Add missing comma after octeontx2f95mm entry.
2020-08-03 Qian jianhua <qianjh@cn.fujitsu.com>
* config/aarch64/aarch64-cores.def (a64fx): New core.
* config/aarch64/aarch64-tune.md: Regenerated.
* config/aarch64/aarch64.c (a64fx_prefetch_tune, a64fx_tunings): New.
* doc/invoke.texi: Add a64fx to the list.
2020-08-03 Roger Sayle <roger@nextmovesoftware.com>
PR rtl-optimization/61494
* simplify-rtx.c (simplify_binary_operation_1) [MINUS]: Don't
simplify x - 0.0 with -fsignaling-nans.
2020-08-03 Roger Sayle <roger@nextmovesoftware.com>
* genmatch.c (decision_tree::gen): Emit stub functions for
tree code operand counts that have no simplifications.
(main): Correct comment typo.
2020-08-03 Jonathan Wakely <jwakely@redhat.com>
* gimple-ssa-sprintf.c: Fix typos in comments.
2020-08-03 Tamar Christina <tamar.christina@arm.com>
* config/aarch64/driver-aarch64.c (readline): Check return value fgets.
2020-08-03 Richard Biener <rguenther@suse.de>
* doc/match-and-simplify.texi: Amend accordingly.
2020-08-03 Richard Biener <rguenther@suse.de>
* genmatch.c (parser::gimple): New.
(parser::parser): Initialize gimple flag member.
(parser::parse_expr): Error on ! operator modifier when
not targeting GIMPLE.
(main): Pass down gimple flag to parser ctor.
2020-08-03 Aldy Hernandez <aldyh@redhat.com>
* Makefile.in (GTFILES): Move value-range.h up.
* gengtype-lex.l: Set yylval to handle GTY markers on templates.
* ipa-cp.c (initialize_node_lattices): Call value_range
constructor.
(ipcp_propagate_stage): Use in-place new so value_range construct
is called.
* ipa-fnsummary.c (evaluate_conditions_for_known_args): Use std
vec instead of GCC's vec<>.
(evaluate_properties_for_edge): Adjust for std vec.
(ipa_fn_summary_t::duplicate): Same.
(estimate_ipcp_clone_size_and_time): Same.
* ipa-prop.c (ipa_get_value_range): Use in-place new for
value_range.
* ipa-prop.h (struct GTY): Remove class keyword for m_vr.
* range-op.cc (empty_range_check): Rename to...
(empty_range_varying): ...this and adjust for varying.
(undefined_shift_range_check): Adjust for irange.
(range_operator::wi_fold): Same.
(range_operator::fold_range): Adjust for irange. Special case
single pairs for performance.
(range_operator::op1_range): Adjust for irange.
(range_operator::op2_range): Same.
(value_range_from_overflowed_bounds): Same.
(value_range_with_overflow): Same.
(create_possibly_reversed_range): Same.
(range_true): Same.
(range_false): Same.
(range_true_and_false): Same.
(get_bool_state): Adjust for irange and tweak for performance.
(operator_equal::fold_range): Adjust for irange.
(operator_equal::op1_range): Same.
(operator_equal::op2_range): Same.
(operator_not_equal::fold_range): Same.
(operator_not_equal::op1_range): Same.
(operator_not_equal::op2_range): Same.
(build_lt): Same.
(build_le): Same.
(build_gt): Same.
(build_ge): Same.
(operator_lt::fold_range): Same.
(operator_lt::op1_range): Same.
(operator_lt::op2_range): Same.
(operator_le::fold_range): Same.
(operator_le::op1_range): Same.
(operator_le::op2_range): Same.
(operator_gt::fold_range): Same.
(operator_gt::op1_range): Same.
(operator_gt::op2_range): Same.
(operator_ge::fold_range): Same.
(operator_ge::op1_range): Same.
(operator_ge::op2_range): Same.
(operator_plus::wi_fold): Same.
(operator_plus::op1_range): Same.
(operator_plus::op2_range): Same.
(operator_minus::wi_fold): Same.
(operator_minus::op1_range): Same.
(operator_minus::op2_range): Same.
(operator_min::wi_fold): Same.
(operator_max::wi_fold): Same.
(cross_product_operator::wi_cross_product): Same.
(operator_mult::op1_range): New.
(operator_mult::op2_range): New.
(operator_mult::wi_fold): Adjust for irange.
(operator_div::wi_fold): Same.
(operator_exact_divide::op1_range): Same.
(operator_lshift::fold_range): Same.
(operator_lshift::wi_fold): Same.
(operator_lshift::op1_range): New.
(operator_rshift::op1_range): New.
(operator_rshift::fold_range): Adjust for irange.
(operator_rshift::wi_fold): Same.
(operator_cast::truncating_cast_p): Abstract out from
operator_cast::fold_range.
(operator_cast::fold_range): Adjust for irange and tweak for
performance.
(operator_cast::inside_domain_p): Abstract out from fold_range.
(operator_cast::fold_pair): Same.
(operator_cast::op1_range): Use abstracted methods above. Adjust
for irange and tweak for performance.
(operator_logical_and::fold_range): Adjust for irange.
(operator_logical_and::op1_range): Same.
(operator_logical_and::op2_range): Same.
(unsigned_singleton_p): New.
(operator_bitwise_and::remove_impossible_ranges): New.
(operator_bitwise_and::fold_range): New.
(wi_optimize_and_or): Adjust for irange.
(operator_bitwise_and::wi_fold): Same.
(set_nonzero_range_from_mask): New.
(operator_bitwise_and::simple_op1_range_solver): New.
(operator_bitwise_and::op1_range): Adjust for irange.
(operator_bitwise_and::op2_range): Same.
(operator_logical_or::fold_range): Same.
(operator_logical_or::op1_range): Same.
(operator_logical_or::op2_range): Same.
(operator_bitwise_or::wi_fold): Same.
(operator_bitwise_or::op1_range): Same.
(operator_bitwise_or::op2_range): Same.
(operator_bitwise_xor::wi_fold): Same.
(operator_bitwise_xor::op1_range): New.
(operator_bitwise_xor::op2_range): New.
(operator_trunc_mod::wi_fold): Adjust for irange.
(operator_logical_not::fold_range): Same.
(operator_logical_not::op1_range): Same.
(operator_bitwise_not::fold_range): Same.
(operator_bitwise_not::op1_range): Same.
(operator_cst::fold_range): Same.
(operator_identity::fold_range): Same.
(operator_identity::op1_range): Same.
(class operator_unknown): New.
(operator_unknown::fold_range): New.
(class operator_abs): Adjust for irange.
(operator_abs::wi_fold): Same.
(operator_abs::op1_range): Same.
(operator_absu::wi_fold): Same.
(class operator_negate): Same.
(operator_negate::fold_range): Same.
(operator_negate::op1_range): Same.
(operator_addr_expr::fold_range): Same.
(operator_addr_expr::op1_range): Same.
(pointer_plus_operator::wi_fold): Same.
(pointer_min_max_operator::wi_fold): Same.
(pointer_and_operator::wi_fold): Same.
(pointer_or_operator::op1_range): New.
(pointer_or_operator::op2_range): New.
(pointer_or_operator::wi_fold): Adjust for irange.
(integral_table::integral_table): Add entries for IMAGPART_EXPR
and POINTER_DIFF_EXPR.
(range_cast): Adjust for irange.
(build_range3): New.
(range3_tests): New.
(widest_irange_tests): New.
(multi_precision_range_tests): New.
(operator_tests): New.
(range_tests): New.
* range-op.h (class range_operator): Adjust for irange.
(range_cast): Same.
* tree-vrp.c (range_fold_binary_symbolics_p): Adjust for irange and
tweak for performance.
(range_fold_binary_expr): Same.
(masked_increment): Change to extern.
* tree-vrp.h (masked_increment): New.
* tree.c (cache_wide_int_in_type_cache): New function abstracted
out from wide_int_to_tree_1.
(wide_int_to_tree_1): Cache 0, 1, and MAX for pointers.
* value-range-equiv.cc (value_range_equiv::deep_copy): Use kind
method.
(value_range_equiv::move): Same.
(value_range_equiv::check): Adjust for irange.
(value_range_equiv::intersect): Same.
(value_range_equiv::union_): Same.
(value_range_equiv::dump): Same.
* value-range.cc (irange::operator=): Same.
(irange::maybe_anti_range): New.
(irange::copy_legacy_range): New.
(irange::set_undefined): Adjust for irange.
(irange::swap_out_of_order_endpoints): Abstract out from set().
(irange::set_varying): Adjust for irange.
(irange::irange_set): New.
(irange::irange_set_anti_range): New.
(irange::set): Adjust for irange.
(value_range::set_nonzero): Move to header file.
(value_range::set_zero): Move to header file.
(value_range::check): Rename to...
(irange::verify_range): ...this.
(value_range::num_pairs): Rename to...
(irange::legacy_num_pairs): ...this, and adjust for irange.
(value_range::lower_bound): Rename to...
(irange::legacy_lower_bound): ...this, and adjust for irange.
(value_range::upper_bound): Rename to...
(irange::legacy_upper_bound): ...this, and adjust for irange.
(value_range::equal_p): Rename to...
(irange::legacy_equal_p): ...this.
(value_range::operator==): Move to header file.
(irange::equal_p): New.
(irange::symbolic_p): Adjust for irange.
(irange::constant_p): Same.
(irange::singleton_p): Same.
(irange::value_inside_range): Same.
(irange::may_contain_p): Same.
(irange::contains_p): Same.
(irange::normalize_addresses): Same.
(irange::normalize_symbolics): Same.
(irange::legacy_intersect): Same.
(irange::legacy_union): Same.
(irange::union_): Same.
(irange::intersect): Same.
(irange::irange_union): New.
(irange::irange_intersect): New.
(subtract_one): New.
(irange::invert): Adjust for irange.
(dump_bound_with_infinite_markers): New.
(irange::dump): Adjust for irange.
(debug): Add irange versions.
(range_has_numeric_bounds_p): Adjust for irange.
(vrp_val_max): Move to header file.
(vrp_val_min): Move to header file.
(DEFINE_INT_RANGE_GC_STUBS): New.
(DEFINE_INT_RANGE_INSTANCE): New.
* value-range.h (class irange): New.
(class int_range): New.
(class value_range): Rename to a instantiation of int_range.
(irange::legacy_mode_p): New.
(value_range::value_range): Remove.
(irange::kind): New.
(irange::num_pairs): Adjust for irange.
(irange::type): Adjust for irange.
(irange::tree_lower_bound): New.
(irange::tree_upper_bound): New.
(irange::type): Adjust for irange.
(irange::min): Same.
(irange::max): Same.
(irange::varying_p): Same.
(irange::undefined_p): Same.
(irange::zero_p): Same.
(irange::nonzero_p): Same.
(irange::supports_type_p): Same.
(range_includes_zero_p): Same.
(gt_ggc_mx): New.
(gt_pch_nx): New.
(irange::irange): New.
(int_range::int_range): New.
(int_range::operator=): New.
(irange::set): Moved from value-range.cc and adjusted for irange.
(irange::set_undefined): Same.
(irange::set_varying): Same.
(irange::operator==): Same.
(irange::lower_bound): Same.
(irange::upper_bound): Same.
(irange::union_): Same.
(irange::intersect): Same.
(irange::set_nonzero): Same.
(irange::set_zero): Same.
(irange::normalize_min_max): New.
(vrp_val_max): Move from value-range.cc.
(vrp_val_min): Same.
* vr-values.c (vr_values::get_lattice_entry): Call value_range
constructor.
2020-08-02 Sergei Trofimovich <siarheit@google.com>
PR bootstrap/96404
* var-tracking.c (vt_find_locations): Fully initialize
all 'in_pending' bits.
2020-08-01 Jan Hubicka <jh@suse.cz>
* symtab.c (symtab_node::verify_base): Verify order.
(symtab_node::verify_symtab_nodes): Verify order.
2020-08-01 Jan Hubicka <jh@suse.cz>
* predict.c (estimate_bb_frequencies): Cap recursive calls by 90%.
2020-08-01 Jojo R <jiejie_rong@c-sky.com>
* config/csky/csky_opts.h (float_abi_type): New.
* config/csky/csky.h (TARGET_SOFT_FLOAT): New.
(TARGET_HARD_FLOAT): New.
(TARGET_HARD_FLOAT_ABI): New.
(OPTION_DEFAULT_SPECS): Use mfloat-abi.
* config/csky/csky.opt (mfloat-abi): New.
* doc/invoke.texi (C-SKY Options): Document -mfloat-abi=.
2020-08-01 Cooper Qu <cooper.qu@linux.alibaba.com>
* config/csky/t-csky-linux: Delete big endian CPUs' multilib.
2020-07-31 Roger Sayle <roger@nextmovesoftware.com>
Tom de Vries <tdevries@suse.de>
PR target/90928
* config/nvptx/nvptx.c (nvptx_truly_noop_truncation): Implement.
(TARGET_TRULY_NOOP_TRUNCATION): Define.
2020-07-31 Richard Biener <rguenther@suse.de>
PR debug/96383
* langhooks-def.h (lhd_finalize_early_debug): Declare.
(LANG_HOOKS_FINALIZE_EARLY_DEBUG): Define.
(LANG_HOOKS_INITIALIZER): Amend.
* langhooks.c: Include cgraph.h and debug.h.
(lhd_finalize_early_debug): Default implementation from
former code in finalize_compilation_unit.
* langhooks.h (lang_hooks::finalize_early_debug): Add.
* cgraphunit.c (symbol_table::finalize_compilation_unit):
Call the finalize_early_debug langhook.
2020-07-31 Richard Biener <rguenther@suse.de>
* genmatch.c (expr::force_leaf): Add and initialize.
(expr::gen_transform): Honor force_leaf by passing
NULL as sequence argument to maybe_push_res_to_seq.
(parser::parse_expr): Allow ! marker on result expression
operations.
* doc/match-and-simplify.texi: Amend.
2020-07-31 Kewen Lin <linkw@linux.ibm.com>
* tree-vect-loop.c (vect_get_known_peeling_cost): Don't consider branch
taken costs for prologue and epilogue if they don't exist.
(vect_estimate_min_profitable_iters): Likewise.
2020-07-31 Martin Liska <mliska@suse.cz>
* cgraph.h: Remove leading empty lines.
* cgraphunit.c (enum cgraph_order_sort_kind): Remove
ORDER_UNDEFINED.
(struct cgraph_order_sort): Add constructors.
(cgraph_order_sort::process): New.
(cgraph_order_cmp): New.
(output_in_order): Simplify and push nodes to vector.
2020-07-31 Richard Biener <rguenther@suse.de>
PR middle-end/96369
* fold-const.c (fold_range_test): Special-case constant
LHS for short-circuiting operations.
2020-07-31 Martin Liska <mliska@suse.cz>
* gcov-io.h (GCOV_PREALLOCATED_KVP): New.
2020-07-31 Zhiheng Xie <xiezhiheng@huawei.com>
* config/aarch64/aarch64-builtins.c (aarch64_general_add_builtin):
Add new argument ATTRS.
(aarch64_call_properties): New function.
(aarch64_modifies_global_state_p): Likewise.
(aarch64_reads_global_state_p): Likewise.
(aarch64_could_trap_p): Likewise.
(aarch64_add_attribute): Likewise.
(aarch64_get_attributes): Likewise.
(aarch64_init_simd_builtins): Add attributes for each built-in function.
2020-07-31 Richard Biener <rguenther@suse.de>
PR debug/78288
* var-tracking.c (vt_find_locations): Use
rev_post_order_and_mark_dfs_back_seme and separately iterate
over toplevel SCCs.
2020-07-31 Richard Biener <rguenther@suse.de>
* cfganal.h (rev_post_order_and_mark_dfs_back_seme): Adjust
prototype.
* cfganal.c (rpoamdbs_bb_data): New struct with pre BB data.
(tag_header): New helper.
(cmp_edge_dest_pre): Likewise.
(rev_post_order_and_mark_dfs_back_seme): Compute SCCs,
find SCC exits and perform a DFS walk with extra edges to
compute a RPO with adjacent SCC members when requesting an
iteration optimized order and populate the toplevel SCC array.
* tree-ssa-sccvn.c (do_rpo_vn): Remove ad-hoc computation
of max_rpo and fill it in from SCC extent info instead.
2020-07-30 Will Schmidt <will_schmidt@vnet.ibm.com>
* config/rs6000/altivec.h (vec_test_lsbb_all_ones): New define.
(vec_test_lsbb_all_zeros): New define.
* config/rs6000/rs6000-builtin.def (BU_P10_VSX_1): New built-in
handling macro.
(XVTLSBB_ZEROS, XVTLSBB_ONES): New builtin defines.
(xvtlsbb_all_zeros, xvtlsbb_all_ones): New builtin overloads.
* config/rs6000/rs6000-call.c (P10_BUILTIN_VEC_XVTLSBB_ZEROS,
P10_BUILTIN_VEC_XVTLSBB_ONES): New altivec_builtin_types entries.
* config/rs6000/rs6000.md (UNSPEC_XVTLSBB): New unspec.
* config/rs6000/vsx.md (*xvtlsbb_internal): New instruction define.
(xvtlsbbo, xvtlsbbz): New instruction expands.
2020-07-30 Cooper Qu <cooper.qu@linux.alibaba.com>
* config/riscv/riscv-opts.h (stack_protector_guard): New enum.
* config/riscv/riscv.c (riscv_option_override): Handle
the new options.
* config/riscv/riscv.md (stack_protect_set): New pattern to handle
flexible stack protector guard settings.
(stack_protect_set_<mode>): Ditto.
(stack_protect_test): Ditto.
(stack_protect_test_<mode>): Ditto.
* config/riscv/riscv.opt (mstack-protector-guard=,
mstack-protector-guard-reg=, mstack-protector-guard-offset=): New
options.
* doc/invoke.texi (Option Summary) [RISC-V Options]:
Add -mstack-protector-guard=, -mstack-protector-guard-reg=, and
-mstack-protector-guard-offset=.
(RISC-V Options): Ditto.
2020-07-30 H.J. Lu <hjl.tools@gmail.com>
PR bootstrap/96202
* configure: Regenerated.
2020-07-30 Richard Biener <rguenther@suse.de>
PR tree-optimization/96370
* tree-ssa-reassoc.c (rewrite_expr_tree): Add operation
code parameter and use it instead of picking it up from
the stmt that is being rewritten.
(reassociate_bb): Pass down the operation code.
2020-07-30 Roger Sayle <roger@nextmovesoftware.com>
Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.md (nvptx_vector_index_operand): New predicate.
(VECELEM): New mode attribute for a vector's uppercase element mode.
(Vecelem): New mode attribute for a vector's lowercase element mode.
(*vec_set<mode>_0, *vec_set<mode>_1, *vec_set<mode>_2)
(*vec_set<mode>_3): New instructions.
(vec_set<mode>): New expander to generate one of the above insns.
(vec_extract<mode><Vecelem>): New instruction.
2020-07-30 Martin Liska <mliska@suse.cz>
PR target/95435
* config/i386/x86-tune-costs.h: Use libcall for large sizes for
-m32. Start using libcall from 128+ bytes.
2020-07-30 Martin Liska <mliska@suse.cz>
* config/i386/x86-tune-costs.h: Change code formatting.
2020-07-29 Roger Sayle <roger@nextmovesoftware.com>
* config/nvptx/nvptx.md (recip<mode>2): New instruction.
2020-07-29 Fangrui Song <maskray@google.com>
PR debug/95096
* opts.c (common_handle_option): Don't make -gsplit-dwarf imply -g.
* doc/invoke.texi (-gsplit-dwarf): Update documentation.
2020-07-29 Joe Ramsay <joe.ramsay@arm.com>
* config/arm/arm-protos.h (arm_coproc_mem_operand_no_writeback):
Declare prototype.
(arm_mve_mode_and_operands_type_check): Declare prototype.
* config/arm/arm.c (arm_coproc_mem_operand): Refactor to use
_arm_coproc_mem_operand.
(arm_coproc_mem_operand_wb): New function to cover full, limited
and no writeback.
(arm_coproc_mem_operand_no_writeback): New constraint for memory
operand with no writeback.
(arm_print_operand): Extend 'E' specifier for memory operand
that does not support writeback.
(arm_mve_mode_and_operands_type_check): New constraint check for
MVE memory operands.
* config/arm/constraints.md: Add Uj constraint for VFP vldr.16
and vstr.16.
* config/arm/vfp.md (*mov_load_vfp_hf16): New pattern for
vldr.16.
(*mov_store_vfp_hf16): New pattern for vstr.16.
(*mov<mode>_vfp_<mode>16): Remove MVE moves.
2020-07-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/96349
* tree-ssa-loop-split.c (stmt_semi_invariant_p_1): When the
condition runs into a loop PHI with an abnormal entry value give up.
2020-07-29 Richard Biener <rguenther@suse.de>
* tree-vectorizer.c (vectorize_loops): Reset the SCEV
cache if we removed any SIMD UID SSA defs.
* gimple-loop-interchange.cc (pass_linterchange::execute):
Reset the scev cache if we interchanged a loop.
2020-07-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/95679
* tree-ssa-propagate.h
(substitute_and_fold_engine::propagate_into_phi_args): Return
whether anything changed.
* tree-ssa-propagate.c
(substitute_and_fold_engine::propagate_into_phi_args): Likewise.
(substitute_and_fold_dom_walker::before_dom_children): Update
something_changed.
2020-07-29 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
* tree-vect-data-refs.c (vect_enhance_data_refs_alignment):
Ensure that loop variable npeel_tmp advances in each iteration.
2020-07-29 Hans-Peter Nilsson <hp@bitrange.com>
* config/mmix/mmix.h (NO_FUNCTION_CSE): Define to 1.
2020-07-29 Hans-Peter Nilsson <hp@bitrange.com>
* config/mmix/mmix.h (ASM_OUTPUT_EXTERNAL): Define to
default_elf_asm_output_external.
2020-07-28 Sergei Trofimovich <siarheit@google.com>
PR ipa/96291
* ipa-cp.c (has_undead_caller_from_outside_scc_p): Consider
unoptimized callers as undead.
2020-07-28 Roger Sayle <roger@nextmovesoftware.com>
Richard Biener <rguenther@suse.de>
* match.pd (popcount(x)&1 -> parity(x)): New simplification.
(parity(~x) -> parity(x)): New simplification.
(parity(x)^parity(y) -> parity(x^y)): New simplification.
(parity(x&1) -> x&1): New simplification.
(popcount(x) -> x>>C): New simplification.
2020-07-28 Roger Sayle <roger@nextmovesoftware.com>
Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.md (extendqihi2): New instruction.
(ashl<mode>3, ashr<mode>3, lshr<mode>3): Support HImode.
2020-07-28 Jakub Jelinek <jakub@redhat.com>
PR middle-end/96335
* calls.c (maybe_warn_rdwr_sizes): Add FNDECL and FNTYPE arguments,
instead of trying to rediscover them in the body.
(initialize_argument_information): Adjust caller.
2020-07-28 Kewen Lin <linkw@linux.ibm.com>
* tree-vect-loop.c (vect_get_known_peeling_cost): Factor out some code
to determine peel_iters_epilogue to...
(vect_get_peel_iters_epilogue): ...this new function.
(vect_estimate_min_profitable_iters): Refactor cost calculation on
peel_iters_prologue and peel_iters_epilogue.
2020-07-27 Martin Sebor <msebor@redhat.com>
PR tree-optimization/84079
* gimple-array-bounds.cc (array_bounds_checker::check_addr_expr):
Only allow just-past-the-end references for the most significant
array bound.
2020-07-27 Hu Jiangping <hujiangping@cn.fujitsu.com>
PR driver/96247
* opts.c (check_alignment_argument): Set the -falign-Name
on/off flag on and set the -falign-Name string value null,
when the command-line specified argument is zero.
2020-07-27 Martin Liska <mliska@suse.cz>
PR tree-optimization/96058
* expr.c (string_constant): Build string_constant only
for a type that has same precision as char_type_node
and is an integral type.
2020-07-27 Richard Biener <rguenther@suse.de>
* var-tracking.c (variable_tracking_main_1): Remove call
to mark_dfs_back_edges.
2020-07-27 Martin Liska <mliska@suse.cz>
PR tree-optimization/96128
* tree-vect-generic.c (expand_vector_comparison): Do not expand
vector comparison with VEC_COND_EXPR.
2020-07-27 H.J. Lu <hjl.tools@gmail.com>
PR bootstrap/96203
* common.opt: Add -fcf-protection=check.
* flag-types.h (cf_protection_level): Add CF_CHECK.
* lto-wrapper.c (merge_and_complain): Issue an error for
mismatching -fcf-protection values with -fcf-protection=check.
Otherwise, merge -fcf-protection values.
* doc/invoke.texi: Document -fcf-protection=check.
2020-07-27 Martin Liska <mliska@suse.cz>
PR lto/45375
* symbol-summary.h: Call vec_safe_reserve before grow is called
in order to grow to a reasonable size.
* vec.h (vec_safe_reserve): Add missing function for vl_ptr
type.
2020-07-26 Hans-Peter Nilsson <hp@bitrange.com>
* configure.ac (out-of-tree linker .hidden support): Don't turn off
for mmix-knuth-mmixware.
* configure: Regenerate.
2020-07-26 Aaron Sawdey <acsawdey@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Set the default value for -mblock-ops-unaligned-vsx.
* config/rs6000/rs6000.opt: Add -mblock-ops-unaligned-vsx.
* doc/invoke.texi: Document -mblock-ops-unaligned-vsx.
2020-07-25 Hans-Peter Nilsson <hp@bitrange.com>
* config/mmix/mmix.c (TARGET_ASM_OUTPUT_IDENT): Override the default
with default_asm_output_ident_directive.
2020-07-25 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn.c (gcn_scalar_mode_supported_p): New function.
(TARGET_SCALAR_MODE_SUPPORTED_P): New define.
2020-07-24 David Edelsohn <dje.gcc@gmail.com>
Clement Chigot <clement.chigot@atos.net>
* config.gcc (powerpc-ibm-aix7.1): Use t-aix64 and biarch64 for
cpu_is_64bit.
* config/rs6000/aix71.h (ASM_SPEC): Remove aix64 option.
(ASM_SPEC32): New.
(ASM_SPEC64): New.
(ASM_CPU_SPEC): Remove vsx and altivec options.
(CPP_SPEC_COMMON): Rename from CPP_SPEC.
(CPP_SPEC32): New.
(CPP_SPEC64): New.
(CPLUSPLUS_CPP_SPEC): Rename to CPLUSPLUS_CPP_SPEC_COMMON..
(TARGET_DEFAULT): Use 64 bit mask if BIARCH.
(LIB_SPEC_COMMON): Rename from LIB_SPEC.
(LIB_SPEC32): New.
(LIB_SPEC64): New.
(LINK_SPEC_COMMON): Rename from LINK_SPEC.
(LINK_SPEC32): New.
(LINK_SPEC64): New.
(STARTFILE_SPEC): Add 64 bit version of crtcxa and crtdbase.
(ASM_SPEC): Define 32 and 64 bit alternatives using DEFAULT_ARCH64_P.
(CPP_SPEC): Same.
(CPLUSPLUS_CPP_SPEC): Same.
(LIB_SPEC): Same.
(LINK_SPEC): Same.
(SUBTARGET_EXTRA_SPECS): Add new 32/64 specs.
* config/rs6000/aix72.h (TARGET_DEFAULT): Use 64 bit mask if BIARCH.
* config/rs6000/defaultaix64.h: Delete.
2020-07-24 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/rs6000.opt: Delete -mpower10.
2020-07-24 Alexandre Oliva <oliva@adacore.com>
* config/i386/intelmic-mkoffload.c
(generate_target_descr_file): Use dumppfx for save_temps
files. Pass -dumpbase et al down to the compiler.
(generate_target_offloadend_file): Likewise.
(generate_host_descr_file): Likewise.
(prepare_target_image): Likewise. Move out_obj_filename
setting...
(main): ... here. Detect -dumpbase, set dumppfx too.
2020-07-24 Alexandre Oliva <oliva@adacore.com>
PR driver/96230
* gcc.c (process_command): Adjust and document conditions to
reset dumpbase_ext.
2020-07-24 Matthias Klose <doko@ubuntu.com>
* config/aarch64/aarch64.c (+aarch64_offload_options,
TARGET_OFFLOAD_OPTIONS): New.
2020-07-24 Uroš Bizjak <ubizjak@gmail.com>
PR target/95750
* config/i386/sync.md (mmem_thread_fence): Emit mfence_sse2 for -Os.
2020-07-23 Roger Sayle <roger@nextmovesoftware.com>
PR rtl-optimization/96298
* simplify-rtx.c (simplify_binary_operation_1) [XOR]: Xor doesn't
distribute over xor, so (a^b)^(c^b) is not the same as (a^c)^b.
2020-07-23 Dong JianQiang <dongjianqiang2@huawei.com>
PR gcov-profile/96267
* gcov-io.c (gcov_open): enable if IN_GCOV_TOOL.
2020-07-23 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/rs6000.c (adjust_vectorization_cost): Renamed to ...
(rs6000_adjust_vect_cost_per_stmt): ... here.
(rs6000_add_stmt_cost): Rename adjust_vectorization_cost to
rs6000_adjust_vect_cost_per_stmt.
2020-07-23 Kewen Lin <linkw@linux.ibm.com>
* tree-ssa-loop-ivopts.c (get_mem_type_for_internal_fn): Handle
IFN_LEN_LOAD and IFN_LEN_STORE.
(get_alias_ptr_type_for_ptr_address): Likewise.
2020-07-23 Kito Cheng <kito.cheng@sifive.com>
PR target/96260
* asan.c (asan_shadow_offset_set_p): New.
* asan.h (asan_shadow_offset_set_p): Ditto.
* toplev.c (process_options): Allow -fsanitize=kernel-address
even TARGET_ASAN_SHADOW_OFFSET not implemented, only check when
asan stack protection is enabled.
2020-07-22 Peter Bergner <bergner@linux.ibm.com>
PR target/96236
* config/rs6000/rs6000-call.c (rs6000_gimple_fold_mma_builtin): Handle
little-endian memory ordering.
2020-07-22 Nathan Sidwell <nathan@acm.org>
* dumpfile.c (parse_dump_option): Deal with filenames
containing '-'
2020-07-22 Nathan Sidwell <nathan@acm.org>
* incpath.c (add_path): Avoid multiple strlen calls.
2020-07-22 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* expmed.c (expand_sdiv_pow2): Check return value from emit_store_flag
is not NULL_RTX before use.
2020-07-22 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* expr.c (convert_modes): Allow a constant integer to be converted to
any scalar int mode.
2020-07-22 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* config/aarch64/aarch64-ldpstp.md: Add two peepholes for adjusted vector
V2SI, V2SF, V2DI, V2DF load pair and store pair modes.
* config/aarch64/aarch64-protos.h (aarch64_gen_adjusted_ldpstp):
Change mode parameter to machine_mode.
(aarch64_operands_adjust_ok_for_ldpstp): Change mode parameter to
machine_mode.
* config/aarch64/aarch64.c (aarch64_operands_adjust_ok_for_ldpstp):
Change mode parameter to machine_mode.
(aarch64_gen_adjusted_ldpstp): Change mode parameter to machine_mode.
* config/aarch64/iterators.md (VP_2E): New iterator for 2 element vectors.
2020-07-22 Wei Wentao <weiwt.fnst@cn.fujitsu.com>
* doc/languages.texi: Fix “then”/“than” typo.
2020-07-21 Sunil K Pandey <skpgkp2@gmail.com>
PR target/95237
* config/i386/i386-protos.h (ix86_local_alignment): Add
another function parameter may_lower alignment. Default is
false.
* config/i386/i386.c (ix86_lower_local_decl_alignment): New
function.
(ix86_local_alignment): Amend ix86_local_alignment to accept
another parameter may_lower. If may_lower is true, new align
may be lower than incoming alignment. If may_lower is false,
new align will be greater or equal to incoming alignment.
(TARGET_LOWER_LOCAL_DECL_ALIGNMENT): Define.
* doc/tm.texi: Regenerate.
* doc/tm.texi.in (TARGET_LOWER_LOCAL_DECL_ALIGNMENT): New
hook.
* target.def (lower_local_decl_alignment): New hook.
2020-07-21 Uroš Bizjak <ubizjak@gmail.com>
PR target/95750
* config/i386/sync.md (mfence_sse2): Enable for
TARGET_64BIT and TARGET_SSE2.
(mfence_nosse): Always enable.
2020-07-21 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430-protos.h (msp430_do_not_relax_short_jumps):
Remove.
* config/msp430/msp430.c (msp430_do_not_relax_short_jumps): Likewise.
* config/msp430/msp430.md (cbranchhi4_real): Remove special case for
msp430_do_not_relax_short_jumps.
2020-07-21 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.md: New "extendqipsi2" define_insn.
2020-07-21 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.h (NO_FUNCTION_CSE): Set to true at -O2 and
above.
2020-07-21 Xionghu Luo <luoxhu@linux.ibm.com>
PR rtl-optimization/89310
* config/rs6000/rs6000.md (movsf_from_si2): New define_insn_and_split.
2020-07-20 Hans-Peter Nilsson <hp@bitrange.com>
* config/mmix/mmix.c (mmix_expand_prologue): Calculate the total
allocated size and set current_function_static_stack_size, if
flag_stack_usage_info.
2020-07-20 Sergei Trofimovich <siarheit@google.com>
PR target/96190
* config/sparc/linux.h (ENDFILE_SPEC): Use GNU_USER_TARGET_ENDFILE_SPEC
to get crtendS.o for !no-pie mode.
* config/sparc/linux64.h (ENDFILE_SPEC): Ditto.
2020-07-20 Yang Yang <yangyang305@huawei.com>
* tree-vect-stmts.c (vectorizable_simd_clone_call): Add
VIEW_CONVERT_EXPRs if the arguments types and return type
of simd clone function are distinct with the vectype of stmt.
2020-07-20 Uroš Bizjak <ubizjak@gmail.com>
PR target/95750
* config/i386/i386.h (TARGET_AVOID_MFENCE):
Rename from TARGET_USE_XCHG_FOR_ATOMIC_STORE.
* config/i386/sync.md (mfence_sse2): Disable for TARGET_AVOID_MFENCE.
(mfence_nosse): Enable also for TARGET_AVOID_MFENCE. Emit stack
referred memory in word_mode.
(mem_thread_fence): Do not generate mfence_sse2 pattern when
TARGET_AVOID_MFENCE is true.
(atomic_store<mode>): Update for rename.
* config/i386/x86-tune.def (X86_TUNE_AVOID_MFENCE):
Rename from X86_TUNE_USE_XCHG_FOR_ATOMIC_STORE.
2020-07-20 Martin Sebor <msebor@redhat.com>
PR middle-end/95189
PR middle-end/95886
* builtins.c (inline_expand_builtin_string_cmp): Rename...
(inline_expand_builtin_bytecmp): ...to this.
(builtin_memcpy_read_str): Don't expect data to be nul-terminated.
(expand_builtin_memory_copy_args): Handle object representations
with embedded nul bytes.
(expand_builtin_memcmp): Same.
(expand_builtin_strcmp): Adjust call to naming change.
(expand_builtin_strncmp): Same.
* expr.c (string_constant): Create empty strings with nonzero size.
* fold-const.c (c_getstr): Rename locals and update comments.
* tree.c (build_string): Accept null pointer argument.
(build_string_literal): Same.
* tree.h (build_string): Provide a default.
(build_string_literal): Same.
2020-07-20 Richard Biener <rguenther@suse.de>
* cfganal.c (rev_post_order_and_mark_dfs_back_seme): Remove
write-only post array.
2020-07-20 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/93121
* gimple-fold.c (fold_const_aggregate_ref_1): For COMPONENT_REF
of a bitfield not aligned on byte boundaries try to
fold_ctor_reference DECL_BIT_FIELD_REPRESENTATIVE if any and
adjust it depending on endianity.
2020-07-20 Jakub Jelinek <jakub@redhat.com>
PR libstdc++/93121
* fold-const.c (native_encode_initializer): Handle bit-fields.
2020-07-20 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Set param_vect_partial_vector_usage to 0 explicitly.
* doc/invoke.texi (vect-partial-vector-usage): Document new option.
* optabs-query.c (get_len_load_store_mode): New function.
* optabs-query.h (get_len_load_store_mode): New declare.
* params.opt (vect-partial-vector-usage): New.
* tree-vect-loop-manip.c (vect_set_loop_controls_directly): Add the
handlings for vectorization using length-based partial vectors, call
vect_gen_len for length generation, and rename some variables with
items instead of scalars.
(vect_set_loop_condition_partial_vectors): Add the handlings for
vectorization using length-based partial vectors.
(vect_do_peeling): Allow remaining eiters less than epilogue vf for
LOOP_VINFO_USING_PARTIAL_VECTORS_P.
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Init
epil_using_partial_vectors_p.
(_loop_vec_info::~_loop_vec_info): Call release_vec_loop_controls
for lengths destruction.
(vect_verify_loop_lens): New function.
(vect_analyze_loop): Add handlings for epilogue of loop when it's
marked to use vectorization using partial vectors.
(vect_analyze_loop_2): Add the check to allow only one vectorization
approach using partial vectorization at the same time. Check param
vect-partial-vector-usage for partial vectors decision. Mark
LOOP_VINFO_EPIL_USING_PARTIAL_VECTORS_P if the epilogue is
considerable to use partial vectors. Call release_vec_loop_controls
for lengths destruction.
(vect_estimate_min_profitable_iters): Adjust for loop vectorization
using length-based partial vectors.
(vect_record_loop_mask): Init factor to 1 for vectorization using
mask-based partial vectors.
(vect_record_loop_len): New function.
(vect_get_loop_len): Likewise.
* tree-vect-stmts.c (check_load_store_for_partial_vectors): Add
checks for vectorization using length-based partial vectors. Factor
some code to lambda function get_valid_nvectors.
(vectorizable_store): Add handlings when using length-based partial
vectors.
(vectorizable_load): Likewise.
(vect_gen_len): New function.
* tree-vectorizer.h (struct rgroup_controls): Add field factor
mainly for length-based partial vectors.
(vec_loop_lens): New typedef.
(_loop_vec_info): Add lens and epil_using_partial_vectors_p.
(LOOP_VINFO_EPIL_USING_PARTIAL_VECTORS_P): New macro.
(LOOP_VINFO_LENS): Likewise.
(LOOP_VINFO_FULLY_WITH_LENGTH_P): Likewise.
(vect_record_loop_len): New declare.
(vect_get_loop_len): Likewise.
(vect_gen_len): Likewise.
2020-07-20 Hans-Peter Nilsson <hp@bitrange.com>
* config/mmix/mmix.c (mmix_option_override): Reinstate default
integer-emitting targetm.asm_out pseudos when dumping detailed
assembly-code.
(mmix_assemble_integer): Update comment.
2020-07-19 H.J. Lu <hjl.tools@gmail.com>
PR target/95973
PR target/96238
* config/i386/cpuid.h: Add include guard.
(__cpuidex): New.
2020-07-18 H.J. Lu <hjl.tools@gmail.com>
PR target/95620
* config/i386/x86-64.h (ASM_OUTPUT_ALIGNED_DECL_LOCAL): New.
2020-07-18 Peter Bergner <bergner@linux.ibm.com>
PR target/92488
* config/rs6000/dfp.md (trunctdsd2): New define_insn.
* config/rs6000/rs6000.md (define_attr "isa"): Add p9.
(define_attr "enabled"): Handle p9.
2020-07-17 Roger Sayle <roger@nextmovesoftware.com>
* function.c (assign_parm_setup_block): Use the macro
TRULY_NOOP_TRUNCATION_MODES_P instead of calling
targetm.truly_noop_truncation directly.
2020-07-17 H.J. Lu <hjl.tools@gmail.com>
PR target/96186
PR target/88713
* config/i386/sse.md (VF_AVX512VL_VF1_128_256): Renamed to ...
(VF1_AVX512ER_128_256): This. Drop DF vector modes.
(rsqrt<mode>2): Replace VF_AVX512VL_VF1_128_256 with
VF1_AVX512ER_128_256.
2020-07-17 Tamar Christina <tamar.christina@arm.com>
* doc/sourcebuild.texi (dg-set-compiler-env-var,
dg-set-target-env-var): Document.
2020-07-17 Tamar Christina <tamar.christina@arm.com>
* config/arm/driver-arm.c (host_detect_local_cpu): Add GCC_CPUINFO.
2020-07-17 Tamar Christina <tamar.christina@arm.com>
* config/aarch64/driver-aarch64.c (host_detect_local_cpu):
Add GCC_CPUINFO.
2020-07-17 Tamar Christina <tamar.christina@arm.com>
* config/aarch64/driver-aarch64.c (INCLUDE_SET): New.
(parse_field): Use std::string.
(split_words, readline, find_field): New.
(host_detect_local_cpu): Fix truncation issues.
2020-07-17 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/mkoffload.c (EM_AMDGPU): Undefine before defining.
(ELFOSABI_AMDGPU_HSA): Likewise.
(ELFABIVERSION_AMDGPU_HSA): Likewise.
(EF_AMDGPU_MACH_AMDGCN_GFX803): Likewise.
(EF_AMDGPU_MACH_AMDGCN_GFX900): Likewise.
(EF_AMDGPU_MACH_AMDGCN_GFX906): Likewise.
(reserved): Delete.
2020-07-17 Andrew Pinski <apinksi@marvell.com>
Dmitrij Pochepko <dmitrij.pochepko@bell-sw.com>
PR target/93720
* config/aarch64/aarch64.c (aarch64_evpc_ins): New function.
(aarch64_expand_vec_perm_const_1): Call it.
* config/aarch64/aarch64-simd.md (aarch64_simd_vec_copy_lane): Make
public, and add a "@" prefix.
2020-07-17 Andrew Pinski <apinksi@marvell.com>
Dmitrij Pochepko <dmitrij.pochepko@bell-sw.com>
PR target/82199
* config/aarch64/aarch64.c (aarch64_evpc_reencode): New function.
(aarch64_expand_vec_perm_const_1): Call it.
2020-07-17 Zhiheng Xie <xiezhiheng@huawei.com>
* config/aarch64/aarch64-builtins.c (enum aarch64_type_qualifiers):
Add new field flags.
(VAR1): Add new field FLAG in macro.
(VAR2): Likewise.
(VAR3): Likewise.
(VAR4): Likewise.
(VAR5): Likewise.
(VAR6): Likewise.
(VAR7): Likewise.
(VAR8): Likewise.
(VAR9): Likewise.
(VAR10): Likewise.
(VAR11): Likewise.
(VAR12): Likewise.
(VAR13): Likewise.
(VAR14): Likewise.
(VAR15): Likewise.
(VAR16): Likewise.
(aarch64_general_fold_builtin): Likewise.
(aarch64_general_gimple_fold_builtin): Likewise.
* config/aarch64/aarch64-simd-builtins.def: Add default flag for
each built-in function.
* config/aarch64/geniterators.sh: Add new field in BUILTIN macro.
2020-07-17 Andreas Krebbel <krebbel@linux.ibm.com>
PR target/96127
* config/s390/s390.c (s390_expand_insv): Invoke the movstrict
expanders to generate the pattern.
* config/s390/s390.md ("*movstricthi", "*movstrictqi"): Remove the
'*' to have callable expanders.
2020-07-16 Hans-Peter Nilsson <hp@axis.com>
Segher Boessenkool <segher@kernel.crashing.org>
PR target/93372
* combine.c (is_just_move): Take an rtx_insn* as argument. Use
single_set on it.
2020-07-16 Uroš Bizjak <ubizjak@gmail.com>
PR target/96189
* config/i386/sync.md
(peephole2 to remove unneded compare after CMPXCHG):
New pattern, also handle XOR zeroing and load of -1 by OR.
2020-07-16 Eric Botcazou <ebotcazou@adacore.com>
* config/i386/i386.c (ix86_compute_frame_layout): Minor tweak.
(ix86_adjust_stack_and_probe): Delete.
(ix86_adjust_stack_and_probe_stack_clash): Rename to above and add
PROTECTION_AREA parameter. If it is true, probe PROBE_INTERVAL plus
a small dope beyond SIZE bytes.
(ix86_emit_probe_stack_range): Use local variable.
(ix86_expand_prologue): Adjust calls to ix86_adjust_stack_and_probe
and tidy up the stack checking code.
* explow.c (get_stack_check_protect): Fix head comment.
(anti_adjust_stack_and_probe_stack_clash): Likewise.
(allocate_dynamic_stack_space): Add comment.
* tree-nested.c (lookup_field_for_decl): Set the DECL_IGNORED_P and
TREE_NO_WARNING but not TREE_ADDRESSABLE flags on the field.
2020-07-16 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/mkoffload.c: Include simple-object.h and elf.h.
(EM_AMDGPU): New macro.
(ELFOSABI_AMDGPU_HSA): New macro.
(ELFABIVERSION_AMDGPU_HSA): New macro.
(EF_AMDGPU_MACH_AMDGCN_GFX803): New macro.
(EF_AMDGPU_MACH_AMDGCN_GFX900): New macro.
(EF_AMDGPU_MACH_AMDGCN_GFX906): New macro.
(R_AMDGPU_NONE): New macro.
(R_AMDGPU_ABS32_LO): New macro.
(R_AMDGPU_ABS32_HI): New macro.
(R_AMDGPU_ABS64): New macro.
(R_AMDGPU_REL32): New macro.
(R_AMDGPU_REL64): New macro.
(R_AMDGPU_ABS32): New macro.
(R_AMDGPU_GOTPCREL): New macro.
(R_AMDGPU_GOTPCREL32_LO): New macro.
(R_AMDGPU_GOTPCREL32_HI): New macro.
(R_AMDGPU_REL32_LO): New macro.
(R_AMDGPU_REL32_HI): New macro.
(reserved): New macro.
(R_AMDGPU_RELATIVE64): New macro.
(gcn_s1_name): Delete global variable.
(gcn_s2_name): Delete global variable.
(gcn_o_name): Delete global variable.
(gcn_cfile_name): Delete global variable.
(files_to_cleanup): New global variable.
(offload_abi): New global variable.
(tool_cleanup): Use files_to_cleanup, not explicit list.
(copy_early_debug_info): New function.
(main): New local variables gcn_s1_name, gcn_s2_name, gcn_o_name,
gcn_cfile_name.
Create files_to_cleanup obstack.
Recognize -march options.
Copy early debug info from input .o files.
2020-07-16 Andrea Corallo <andrea.corallo@arm.com>
* Makefile.in (TAGS): Remove 'params.def'.
2020-07-16 Roger Sayle <roger@nextmovesoftware.com>
* target.def (TARGET_TRULY_NOOP_TRUNCATION): Clarify that
targets that return false, indicating SUBREGs shouldn't be
used, also need to provide a trunc?i?i2 optab that performs this
truncation.
* doc/tm.texi: Regenerate.
2020-07-15 Uroš Bizjak <ubizjak@gmail.com>
PR target/96189
* config/i386/sync.md
(peephole2 to remove unneded compare after CMPXCHG): New pattern.
2020-07-15 Jakub Jelinek <jakub@redhat.com>
PR libgomp/96198
* omp-general.h (struct omp_for_data): Rename min_inner_iterations
member to first_inner_iterations, adjust comment.
* omp-general.c (omp_extract_for_data): Adjust for the above change.
Always use n1first and n2first to compute it, rather than depending
on single_nonrect_cond_code. Similarly, always compute factor
as (m2 - m1) * outer_step / inner_step rather than sometimes m1 - m2
depending on single_nonrect_cond_code.
* omp-expand.c (expand_omp_for_init_vars): Rename min_inner_iterations
to first_inner_iterations and min_inner_iterationsd to
first_inner_iterationsd.
2020-07-15 Jakub Jelinek <jakub@redhat.com>
PR target/96174
* config/i386/avx512fintrin.h (_mm512_cmpeq_pd_mask,
_mm512_mask_cmpeq_pd_mask, _mm512_cmplt_pd_mask,
_mm512_mask_cmplt_pd_mask, _mm512_cmple_pd_mask,
_mm512_mask_cmple_pd_mask, _mm512_cmpunord_pd_mask,
_mm512_mask_cmpunord_pd_mask, _mm512_cmpneq_pd_mask,
_mm512_mask_cmpneq_pd_mask, _mm512_cmpnlt_pd_mask,
_mm512_mask_cmpnlt_pd_mask, _mm512_cmpnle_pd_mask,
_mm512_mask_cmpnle_pd_mask, _mm512_cmpord_pd_mask,
_mm512_mask_cmpord_pd_mask, _mm512_cmpeq_ps_mask,
_mm512_mask_cmpeq_ps_mask, _mm512_cmplt_ps_mask,
_mm512_mask_cmplt_ps_mask, _mm512_cmple_ps_mask,
_mm512_mask_cmple_ps_mask, _mm512_cmpunord_ps_mask,
_mm512_mask_cmpunord_ps_mask, _mm512_cmpneq_ps_mask,
_mm512_mask_cmpneq_ps_mask, _mm512_cmpnlt_ps_mask,
_mm512_mask_cmpnlt_ps_mask, _mm512_cmpnle_ps_mask,
_mm512_mask_cmpnle_ps_mask, _mm512_cmpord_ps_mask,
_mm512_mask_cmpord_ps_mask): Move outside of __OPTIMIZE__ guarded
section.
2020-07-15 Jakub Jelinek <jakub@redhat.com>
PR target/96176
* builtins.c: Include gimple-ssa.h, tree-ssa-live.h and
tree-outof-ssa.h.
(expand_expr_force_mode): If exp is a SSA_NAME with different mode
from MODE and get_gimple_for_ssa_name is a cast from MODE, use the
cast's rhs.
2020-07-15 Jiufu Guo <guojiufu@cn.ibm.com>
* config/rs6000/rs6000.c (rs6000_loop_unroll_adjust): Refine hook.
2020-07-14 David Edelsohn <dje.gcc@gmail.com>
* config/rs6000/rs6000.md (rotldi3_insert_sf): Add TARGET_POWERPC64
condition.
* config/rs6000/rs6000.c (rs6000_expand_vector_init): Add
TARGET_POWERPC64 requirement to TARGET_P8_VECTOR case.
2020-07-14 Lewis Hyatt <lhyatt@gmail.com>
PR preprocessor/49973
PR other/86904
* common.opt: Handle -ftabstop here instead of in c-family
options. Add -fdiagnostics-column-unit= and
-fdiagnostics-column-origin= options.
* opts.c (common_handle_option): Handle the new options.
* diagnostic-format-json.cc (json_from_expanded_location): Add
diagnostic_context argument. Use it to convert column numbers as per
the new options.
(json_from_location_range): Likewise.
(json_from_fixit_hint): Likewise.
(json_end_diagnostic): Pass the new context argument to helper
functions above. Add "column-origin" field to the output.
(test_unknown_location): Add the new context argument to calls to
helper functions.
(test_bad_endpoints): Likewise.
* diagnostic-show-locus.c
(exploc_with_display_col::exploc_with_display_col): Support
tabstop parameter.
(layout_point::layout_point): Make use of class
exploc_with_display_col.
(layout_range::layout_range): Likewise.
(struct line_bounds): Clarify that the units are now always
display columns. Rename members accordingly. Add constructor.
(layout::print_source_line): Add support for tab expansion.
(make_range): Adapt to class layout_range changes.
(layout::maybe_add_location_range): Likewise.
(layout::layout): Adapt to class exploc_with_display_col changes.
(layout::calculate_x_offset_display): Support tabstop parameter.
(layout::print_annotation_line): Adapt to struct line_bounds changes.
(layout::print_line): Likewise.
(line_label::line_label): Add diagnostic_context argument.
(get_affected_range): Likewise.
(get_printed_columns): Likewise.
(layout::print_any_labels): Adapt to struct line_label changes.
(class correction): Add m_tabstop member.
(correction::correction): Add tabstop argument.
(correction::compute_display_cols): Use m_tabstop.
(class line_corrections): Add m_context member.
(line_corrections::line_corrections): Add diagnostic_context argument.
(line_corrections::add_hint): Use m_context to handle tabstops.
(layout::print_trailing_fixits): Adapt to class line_corrections
changes.
(test_layout_x_offset_display_utf8): Support tabstop parameter.
(test_layout_x_offset_display_tab): New selftest.
(test_one_liner_colorized_utf8): Likewise.
(test_tab_expansion): Likewise.
(test_diagnostic_show_locus_one_liner_utf8): Call the new tests.
(diagnostic_show_locus_c_tests): Likewise.
(test_overlapped_fixit_printing): Adapt to helper class and
function changes.
(test_overlapped_fixit_printing_utf8): Likewise.
(test_overlapped_fixit_printing_2): Likewise.
* diagnostic.h (enum diagnostics_column_unit): New enum.
(struct diagnostic_context): Add members for the new options.
(diagnostic_converted_column): Declare.
(json_from_expanded_location): Add new context argument.
* diagnostic.c (diagnostic_initialize): Initialize new members.
(diagnostic_converted_column): New function.
(maybe_line_and_column): Be willing to output a column of 0.
(diagnostic_get_location_text): Convert column number as per the new
options.
(diagnostic_report_current_module): Likewise.
(assert_location_text): Add origin and column_unit arguments for
testing the new functionality.
(test_diagnostic_get_location_text): Test the new functionality.
* doc/invoke.texi: Document the new options and behavior.
* input.h (location_compute_display_column): Add tabstop argument.
* input.c (location_compute_display_column): Likewise.
(test_cpp_utf8): Add selftests for tab expansion.
* tree-diagnostic-path.cc (default_tree_make_json_for_path): Pass the
new context argument to json_from_expanded_location().
2020-07-14 Jakub Jelinek <jakub@redhat.com>
PR middle-end/96194
* expr.c (expand_constructor): Don't create temporary for store to
volatile MEM if exp has an addressable type.
2020-07-14 Nathan Sidwell <nathan@acm.org>
* hash-map.h (hash_map::get): Note it is a pointer to value.
* incpath.h (incpath_kind): Align comments.
2020-07-14 Nathan Sidwell <nathan@acm.org>
* tree-core.h (tree_decl_with_vis, tree_function_decl):
Note additional padding on 64-bits
* tree.c (cache_integer_cst): Note why no caching of enum literals.
(get_tree_code_name): Robustify error case.
2020-07-14 Nathan Sidwell <nathan@acm.org>
* doc/gty.texi: Fic gt_cleare_cache name.
* doc/invoke.texi: Remove duplicate opindex Wabi-tag.
2020-07-14 Jakub Jelinek <jakub@redhat.com>
* omp-general.h (struct omp_for_data): Add adjn1 member.
* omp-general.c (omp_extract_for_data): For non-rect loop, punt on
count computing if n1, n2 or step are not INTEGER_CST earlier.
Narrow the outer iterator range if needed so that non-rect loop
has at least one iteration for each outer range iteration. Compute
adjn1.
* omp-expand.c (expand_omp_for_init_vars): Use adjn1 if non-NULL
instead of the outer loop's n1.
2020-07-14 Matthias Klose <doko@ubuntu.com>
PR lto/95604
* lto-wrapper.c (merge_and_complain): Add decoded options as parameter,
error on different values for -fcf-protection.
(append_compiler_options): Pass -fcf-protection option.
(find_and_merge_options): Add decoded options as parameter,
pass decoded_options to merge_and_complain.
(run_gcc): Pass decoded options to find_and_merge_options.
* lto-opts.c (lto_write_options): Pass -fcf-protection option.
2020-07-13 Alan Modra <amodra@gmail.com>
* config/rs6000/rs6000.md (sibcall_local): Merge sibcall_local32
and sibcall_local64.
(sibcall_value_local): Similarly.
2020-07-13 Nathan Sidwell <nathan@acm.org>
* Makefile.in (distclean): Remove long gone cxxmain.c
2020-07-13 H.J. Lu <hjl.tools@gmail.com>
PR target/95443
* config/i386/i386.md (cmpstrnsi): Pass a copy of the string
length to cmpstrnqi patterns.
2020-07-13 Jakub Jelinek <jakub@redhat.com>
PR ipa/96130
* ipa-fnsummary.c (analyze_function_body): Treat NULL bb->aux
as false predicate.
2020-07-13 Richard Biener <rguenther@suse.de>
PR tree-optimization/96163
* tree-vect-slp.c (vect_schedule_slp_instance): Put new stmts
at least after region begin.
2020-07-13 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Add
__ARM_FEATURE_PAC_DEFAULT support.
2020-07-13 Szabolcs Nagy <szabolcs.nagy@arm.com>
PR target/94891
* doc/extend.texi: Update the text for __builtin_return_address.
2020-07-13 Szabolcs Nagy <szabolcs.nagy@arm.com>
PR target/94891
* config/aarch64/aarch64.c (aarch64_return_address_signing_enabled):
Disable return address signing if __builtin_eh_return is used.
2020-07-13 Szabolcs Nagy <szabolcs.nagy@arm.com>
PR target/94891
PR target/94791
* config/aarch64/aarch64-protos.h (aarch64_return_addr_rtx): Declare.
* config/aarch64/aarch64.c (aarch64_return_addr_rtx): New.
(aarch64_return_addr): Use aarch64_return_addr_rtx.
* config/aarch64/aarch64.h (PROFILE_HOOK): Likewise.
2020-07-13 Richard Sandiford <richard.sandiford@arm.com>
PR middle-end/95114
* tree.h (virtual_method_call_p): Add a default-false parameter
that indicates whether the function is being called from dump
routines.
(obj_type_ref_class): Likewise.
* tree.c (virtual_method_call_p): Likewise.
* ipa-devirt.c (obj_type_ref_class): Likewise. Lazily add ODR
type information for the type when the parameter is false.
* tree-pretty-print.c (dump_generic_node): Update calls to
virtual_method_call_p and obj_type_ref_class accordingly.
2020-07-13 Julian Brown <julian@codesourcery.com>
Thomas Schwinge <thomas@codesourcery.com>
* gimplify.c (gimplify_scan_omp_clauses): Do not strip
GOMP_MAP_TO_PSET/GOMP_MAP_POINTER for OpenACC enter/exit data
directives (see also PR92929).
2020-07-13 Roger Sayle <roger@nextmovesoftware.com>
* convert.c (convert_to_integer_1): Narrow integer operations
even on targets that require explicit truncation instructions.
2020-07-13 Hans-Peter Nilsson <hp@axis.com>
PR target/93372
* config/cris/cris-passes.def: New file.
* config/cris/t-cris (PASSES_EXTRA): Add cris-passes.def.
* config/cris/cris.c: Add infrastructure bits and pass execute
function cris_postdbr_cmpelim.
* config/cris/cris-protos.h (make_pass_cris_postdbr_cmpelim): Declare.
2020-07-13 Hans-Peter Nilsson <hp@axis.com>
* config/cris/t-cris: Remove gt-cris.h-related excessive cargo.
2020-07-13 Hans-Peter Nilsson <hp@axis.com>
PR target/93372
* config/cris/cris.md ("*add<mode>3_addi"): New splitter.
("*addi_b_<mode>"): New pattern.
("*addsi3<setnz>"): Remove stale %-related comment.
2020-07-13 Hans-Peter Nilsson <hp@axis.com>
* config/cris/cris.md ("setnz_subst", "setnz_subst", "setcc_subst"):
Use match_dup in output template, not match_operand.
2020-07-13 Richard Biener <rguenther@suse.de>
* var-tracking.c (bb_heap_node_t): Remove unused typedef.
(vt_find_locations): Eliminate visited bitmap in favor of
RPO order check. Dump statistics about the number of
local BB dataflow computes.
2020-07-13 Richard Biener <rguenther@suse.de>
PR middle-end/94600
* expr.c (expand_constructor): Make a temporary also if we're
storing to volatile memory.
2020-07-13 Xionghu Luo <luoxhu@linux.ibm.com>
* config/rs6000/rs6000.md (rotl_unspec): New
define_insn_and_split.
2020-07-13 Xionghu Luo <luoxhu@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_expand_vector_init):
Move V4SF to V4SI, init vector like V4SI and move to V4SF back.
2020-07-11 Roger Sayle <roger@nextmovesoftware.com>
* internal-fn.c (expand_mul_overflow): When checking for signed
overflow from a widening multiplication, we access the truncated
lowpart RES twice, so keep this value in a pseudo register.
2020-07-11 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/96146
* value-range.cc (value_range::set): Only decompose POLY_INT_CST
bounds to integers for VR_RANGE. Decay to VR_VARYING for anti-ranges
involving POLY_INT_CSTs.
2020-07-10 David Edelsohn <dje.gcc@gmail.com>
PR target/77373
* config/rs6000/rs6000.c (rs6000_xcoff_select_section): Only
create named section for VAR_DECL or FUNCTION_DECL.
2020-07-10 Joseph Myers <joseph@codesourcery.com>
* glimits.h [__STDC_VERSION__ > 201710L] (BOOL_MAX, BOOL_WIDTH):
New macros.
2020-07-10 Alexander Popov <alex.popov@linux.com>
* shrink-wrap.c (try_shrink_wrapping): Improve debug output.
2020-07-10 Richard Sandiford <richard.sandiford@arm.com>
PR middle-end/96151
* expr.c (expand_expr_real_2): When reducing bit fields,
clear the target if it has a different mode from the expression.
(reduce_to_bit_field_precision): Don't do that here. Instead
assert that the target already has the correct mode.
2020-07-10 Richard Sandiford <richard.sandiford@arm.com>
PR target/92789
PR target/95726
* config/arm/arm.c (arm_attribute_table): Add
"Advanced SIMD type".
(arm_comp_type_attributes): Check that the "Advanced SIMD type"
attributes are equal.
* config/arm/arm-builtins.c: Include stringpool.h and
attribs.h.
(arm_mangle_builtin_vector_type): Use the mangling recorded
in the "Advanced SIMD type" attribute.
(arm_init_simd_builtin_types): Add an "Advanced SIMD type"
attribute to each Advanced SIMD type, using the mangled type
as the attribute's single argument.
2020-07-10 Carl Love <cel@us.ibm.com>
* config/rs6000/vsx.md (VSX_MM): New define_mode_iterator.
(VSX_MM4): New define_mode_iterator.
(vec_mtvsrbmi): New define_insn.
(vec_mtvsr_<mode>): New define_insn.
(vec_cntmb_<mode>): New define_insn.
(vec_extract_<mode>): New define_insn.
(vec_expand_<mode>): New define_insn.
(define_c_enum unspec): Add entries UNSPEC_MTVSBM, UNSPEC_VCNTMB,
UNSPEC_VEXTRACT, UNSPEC_VEXPAND.
* config/rs6000/altivec.h ( vec_genbm, vec_genhm, vec_genwm,
vec_gendm, vec_genqm, vec_cntm, vec_expandm, vec_extractm): Add
defines.
* config/rs6000/rs6000-builtin.def: Add defines BU_P10_2, BU_P10_1.
(BU_P10_1): Add definitions for mtvsrbm, mtvsrhm, mtvsrwm,
mtvsrdm, mtvsrqm, vexpandmb, vexpandmh, vexpandmw, vexpandmd,
vexpandmq, vextractmb, vextractmh, vextractmw, vextractmd, vextractmq.
(BU_P10_2): Add definitions for cntmbb, cntmbh, cntmbw, cntmbd.
(BU_P10_OVERLOAD_1): Add definitions for mtvsrbm, mtvsrhm,
mtvsrwm, mtvsrdm, mtvsrqm, vexpandm, vextractm.
(BU_P10_OVERLOAD_2): Add defition for cntm.
* config/rs6000/rs6000-call.c (rs6000_expand_binop_builtin): Add
checks for CODE_FOR_vec_cntmbb_v16qi, CODE_FOR_vec_cntmb_v8hi,
CODE_FOR_vec_cntmb_v4si, CODE_FOR_vec_cntmb_v2di.
(altivec_overloaded_builtins): Add overloaded argument entries for
P10_BUILTIN_VEC_MTVSRBM, P10_BUILTIN_VEC_MTVSRHM,
P10_BUILTIN_VEC_MTVSRWM, P10_BUILTIN_VEC_MTVSRDM,
P10_BUILTIN_VEC_MTVSRQM, P10_BUILTIN_VEC_VCNTMBB,
P10_BUILTIN_VCNTMBB, P10_BUILTIN_VCNTMBH,
P10_BUILTIN_VCNTMBW, P10_BUILTIN_VCNTMBD,
P10_BUILTIN_VEXPANDMB, P10_BUILTIN_VEXPANDMH,
P10_BUILTIN_VEXPANDMW, P10_BUILTIN_VEXPANDMD,
P10_BUILTIN_VEXPANDMQ, P10_BUILTIN_VEXTRACTMB,
P10_BUILTIN_VEXTRACTMH, P10_BUILTIN_VEXTRACTMW,
P10_BUILTIN_VEXTRACTMD, P10_BUILTIN_VEXTRACTMQ.
(builtin_function_type): Add case entries for P10_BUILTIN_MTVSRBM,
P10_BUILTIN_MTVSRHM, P10_BUILTIN_MTVSRWM, P10_BUILTIN_MTVSRDM,
P10_BUILTIN_MTVSRQM, P10_BUILTIN_VCNTMBB, P10_BUILTIN_VCNTMBH,
P10_BUILTIN_VCNTMBW, P10_BUILTIN_VCNTMBD,
P10_BUILTIN_VEXPANDMB, P10_BUILTIN_VEXPANDMH,
P10_BUILTIN_VEXPANDMW, P10_BUILTIN_VEXPANDMD,
P10_BUILTIN_VEXPANDMQ.
* config/rs6000/rs6000-builtin.def (altivec_overloaded_builtins): Add
entries for MTVSRBM, MTVSRHM, MTVSRWM, MTVSRDM, MTVSRQM, VCNTM,
VEXPANDM, VEXTRACTM.
2020-07-10 Bill Seurer, 507-253-3502, seurer@us.ibm.com <(no_default)>
PR target/95581
* config/rs6000/rs6000-call.c: Add new type v16qi_ftype_pcvoid.
(altivec_init_builtins) Change __builtin_altivec_mask_for_load to use
v16qi_ftype_pcvoid with correct number of parameters.
2020-07-10 H.J. Lu <hjl.tools@gmail.com>
PR target/96144
* config/i386/i386-expand.c (ix86_emit_swsqrtsf): Check
TARGET_AVX512VL when enabling FMA.
2020-07-10 Andrea Corallo <andrea.corallo@arm.com>
Mihail-Calin Ionescu <mihail.ionescu@arm.com>
Iain Apreotesei <iain.apreotesei@arm.com>
* config/arm/arm-protos.h (arm_target_insn_ok_for_lob): New
prototype.
* config/arm/arm.c (TARGET_INVALID_WITHIN_DOLOOP): Define.
(arm_invalid_within_doloop): Implement invalid_within_doloop hook.
(arm_target_insn_ok_for_lob): New function.
* config/arm/arm.h (TARGET_HAVE_LOB): Define macro.
* config/arm/thumb2.md (*doloop_end_internal, doloop_begin)
(dls_insn): Add new patterns.
(doloop_end): Modify to select LR when LOB is available.
* config/arm/unspecs.md: Add new unspec.
* doc/sourcebuild.texi (arm_v8_1_lob_ok)
(arm_thumb2_ok_no_arm_v8_1_lob): Document new target supports
options.
2020-07-10 Richard Biener <rguenther@suse.de>
PR tree-optimization/96133
* gimple-fold.c (fold_array_ctor_reference): Do not
recurse to folding a CTOR that does not fully cover the
asked for object.
2020-07-10 Cui,Lili <lili.cui@intel.com>
* common/config/i386/cpuinfo.h
(get_intel_cpu): Handle sapphirerapids.
* common/config/i386/i386-common.c
(processor_names): Add sapphirerapids and alderlake.
(processor_alias_table): Add sapphirerapids and alderlake.
* common/config/i386/i386-cpuinfo.h
(processor_subtypes): Add INTEL_COREI7_ALDERLAKE and
INTEL_COREI7_ALDERLAKE.
* config.gcc: Add -march=sapphirerapids and alderlake.
* config/i386/driver-i386.c
(host_detect_local_cpu) Handle sapphirerapids and alderlake.
* config/i386/i386-c.c
(ix86_target_macros_internal): Handle sapphirerapids and alderlake.
* config/i386/i386-options.c
(m_SAPPHIRERAPIDS) : Define.
(m_ALDERLAKE): Ditto.
(m_CORE_AVX512) : Add m_SAPPHIRERAPIDS.
(processor_cost_table): Add sapphirerapids and alderlake.
(ix86_option_override_internal) Handle PTA_WAITPKG, PTA_ENQCMD,
PTA_CLDEMOTE, PTA_SERIALIZE, PTA_TSXLDTRK.
* config/i386/i386.h
(ix86_size_cost) : Define SAPPHIRERAPIDS and ALDERLAKE.
(processor_type) : Add PROCESSOR_SAPPHIRERAPIDS and
PROCESSOR_ALDERLAKE.
(PTA_ENQCMD): New.
(PTA_CLDEMOTE): Ditto.
(PTA_SERIALIZE): Ditto.
(PTA_TSXLDTRK): New.
(PTA_SAPPHIRERAPIDS): Ditto.
(PTA_ALDERLAKE): Ditto.
(processor_type) : Add PROCESSOR_SAPPHIRERAPIDS and
PROCESSOR_ALDERLAKE.
* doc/extend.texi: Add sapphirerapids and alderlake.
* doc/invoke.texi: Add sapphirerapids and alderlake.
2020-07-10 Martin Liska <mliska@suse.cz>
* dumpfile.c [profile-report]: Add new profile dump.
* dumpfile.h (enum tree_dump_index): Ad TDI_profile_report.
* passes.c (pass_manager::dump_profile_report): Change stderr
to dump_file.
2020-07-10 Kewen Lin <linkw@linux.ibm.com>
* tree-vect-loop.c (vect_transform_loop): Use LOOP_VINFO_NITERS which
is adjusted by considering peeled prologue for non
vect_use_loop_mask_for_alignment_p cases.
2020-07-09 Peter Bergner <bergner@linux.ibm.com>
PR target/96125
* config/rs6000/rs6000-call.c (rs6000_init_builtins): Define the MMA
specific types __vector_quad and __vector_pair, and initialize the
MMA built-ins if TARGET_EXTRA_BUILTINS is set.
(mma_init_builtins): Don't test for mask set in rs6000_builtin_mask.
Remove now unneeded mask variable.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Add the
OPTION_MASK_MMA flag for power10 if not already set.
2020-07-09 Richard Biener <rguenther@suse.de>
PR tree-optimization/96133
* tree-vect-slp.c (vect_build_slp_tree_1): Compare load_p
status between stmts.
2020-07-09 H.J. Lu <hjl.tools@gmail.com>
PR target/88713
* config/i386/i386-expand.c (ix86_emit_swsqrtsf): Enable FMA.
* config/i386/sse.md (VF_AVX512VL_VF1_128_256): New.
(rsqrt<mode>2): Replace VF1_128_256 with VF_AVX512VL_VF1_128_256.
(rsqrtv16sf2): Removed.
2020-07-09 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (vect_verify_datarefs_alignment): Remove.
(vect_slp_analyze_and_verify_instance_alignment): Rename to ...
(vect_slp_analyze_instance_alignment): ... this.
* tree-vect-data-refs.c (verify_data_ref_alignment): Remove.
(vect_verify_datarefs_alignment): Likewise.
(vect_enhance_data_refs_alignment): Do not call
vect_verify_datarefs_alignment.
(vect_slp_analyze_node_alignment): Rename from
vect_slp_analyze_and_verify_node_alignment and do not
call verify_data_ref_alignment.
(vect_slp_analyze_instance_alignment): Rename from
vect_slp_analyze_and_verify_instance_alignment.
* tree-vect-stmts.c (vectorizable_store): Dump when
we vectorize an unaligned access.
(vectorizable_load): Likewise.
* tree-vect-loop.c (vect_analyze_loop_2): Do not call
vect_verify_datarefs_alignment.
* tree-vect-slp.c (vect_slp_analyze_bb_1): Adjust.
2020-07-09 Bin Cheng <bin.cheng@linux.alibaba.com>
PR tree-optimization/95804
* tree-loop-distribution.c (break_alias_scc_partitions): Force
negative post order to reduction partition.
2020-07-09 Jakub Jelinek <jakub@redhat.com>
* omp-general.h (struct omp_for_data): Add min_inner_iterations
and factor members.
* omp-general.c (omp_extract_for_data): Initialize them and remember
them in OMP_CLAUSE_COLLAPSE_COUNT if needed and restore from there.
* omp-expand.c (expand_omp_for_init_counts): Fix up computation of
counts[fd->last_nonrect] if fd->loop.n2 is INTEGER_CST.
(expand_omp_for_init_vars): For
fd->first_nonrect + 1 == fd->last_nonrect loops with for now
INTEGER_CST fd->loop.n2 find quadratic equation roots instead of
using fallback method when possible.
2020-07-09 Omar Tahir <omar.tahir@arm.com>
* ira.c (move_unallocated_pseudos): Zero first_moveable_pseudo and
last_moveable_pseudo before returning.
2020-07-09 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Add
__ARM_FEATURE_BTI_DEFAULT support.
2020-07-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/aarch64/aarch64-protos.h (aarch64_indirect_call_asm):
New declaration.
* config/aarch64/aarch64.c (aarch64_regno_regclass): Handle new
stub registers class.
(aarch64_class_max_nregs): Likewise.
(aarch64_register_move_cost): Likewise.
(aarch64_sls_shared_thunks): Global array to store stub labels.
(aarch64_sls_emit_function_stub): New.
(aarch64_create_blr_label): New.
(aarch64_sls_emit_blr_function_thunks): New.
(aarch64_sls_emit_shared_blr_thunks): New.
(aarch64_asm_file_end): New.
(aarch64_indirect_call_asm): New.
(TARGET_ASM_FILE_END): Use aarch64_asm_file_end.
(TARGET_ASM_FUNCTION_EPILOGUE): Use
aarch64_sls_emit_blr_function_thunks.
* config/aarch64/aarch64.h (STB_REGNUM_P): New.
(enum reg_class): Add STUB_REGS class.
(machine_function): Introduce `call_via` array for
function-local stub labels.
* config/aarch64/aarch64.md (*call_insn, *call_value_insn): Use
aarch64_indirect_call_asm to emit code when hardening BLR
instructions.
* config/aarch64/constraints.md (Ucr): New constraint
representing registers for indirect calls. Is GENERAL_REGS
usually, and STUB_REGS when hardening BLR instruction against
SLS.
* config/aarch64/predicates.md (aarch64_general_reg): STUB_REGS class
is also a general register.
2020-07-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/aarch64/aarch64-protos.h (aarch64_sls_barrier): New.
* config/aarch64/aarch64.c (aarch64_output_casesi): Emit
speculation barrier after BR instruction if needs be.
(aarch64_trampoline_init): Handle ptr_mode value & adjust size
of code copied.
(aarch64_sls_barrier): New.
(aarch64_asm_trampoline_template): Add needed barriers.
* config/aarch64/aarch64.h (AARCH64_ISA_SB): New.
(TARGET_SB): New.
(TRAMPOLINE_SIZE): Account for barrier.
* config/aarch64/aarch64.md (indirect_jump, *casesi_dispatch,
simple_return, *do_return, *sibcall_insn, *sibcall_value_insn):
Emit barrier if needs be, also account for possible barrier using
"sls_length" attribute.
(sls_length): New attribute.
(length): Determine default using any non-default sls_length
value.
2020-07-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/aarch64/aarch64-protos.h (aarch64_harden_sls_retbr_p):
New.
(aarch64_harden_sls_blr_p): New.
* config/aarch64/aarch64.c (enum aarch64_sls_hardening_type):
New.
(aarch64_harden_sls_retbr_p): New.
(aarch64_harden_sls_blr_p): New.
(aarch64_validate_sls_mitigation): New.
(aarch64_override_options): Parse options for SLS mitigation.
* config/aarch64/aarch64.opt (-mharden-sls): New option.
* doc/invoke.texi: Document new option.
2020-07-09 Kewen Lin <linkw@linux.ibm.com>
* tree-vect-stmts.c (vectorizable_condition): Prohibit vectorization
with partial vectors explicitly excepting for EXTRACT_LAST_REDUCTION
or nested-cycle reduction.
2020-07-09 Kewen Lin <linkw@linux.ibm.com>
* tree-vect-loop.c (vect_analyze_loop_2): Update dumping string
for fully masking to be more common.
2020-07-09 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/riscv.md (get_thread_pointer<mode>): New.
(TP_REGNUM): Ditto.
* doc/extend.texi (Target Builtins): Add RISC-V built-in section.
Document __builtin_thread_pointer.
2020-07-09 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/riscv-sr.c (riscv_remove_unneeded_save_restore_calls):
Abort if any arguments on stack.
2020-07-08 Eric Botcazou <ebotcazou@adacore.com>
* gimple-fold.c (gimple_fold_builtin_memory_op): Do not fold if
either type has reverse scalar storage order.
* tree-ssa-sccvn.c (vn_reference_lookup_3): Do not propagate through
a memory copy if either type has reverse scalar storage order.
2020-07-08 Tobias Burnus <tobias@codesourcery.com>
* config/gcn/mkoffload.c (compile_native, main): Pass -fPIC/-fpic
on to the native compiler, if used.
* config/nvptx/mkoffload.c (compile_native, main): Likewise.
2020-07-08 Will Schmidt <will_schmidt@vnet.ibm.com>
* config/rs6000/altivec.h (vec_vmsumudm): New define.
* config/rs6000/altivec.md (UNSPEC_VMSUMUDM): New unspec.
(altivec_vmsumudm): New define_insn.
* config/rs6000/rs6000-builtin.def (altivec_vmsumudm): New BU_ALTIVEC_3
entry. (vmsumudm): New BU_ALTIVEC_OVERLOAD_3 entry.
* config/rs6000/rs6000-call.c (altivec_overloaded_builtins): Add entries for
ALTIVEC_BUILTIN_VMSUMUDM variants of vec_msum.
* doc/extend.texi: Add document for vmsumudm behind vmsum.
2020-07-08 Richard Biener <rguenther@suse.de>
* tree-vect-stmts.c (get_group_load_store_type): Pass
in the SLP node and the alignment support scheme output.
Set that.
(get_load_store_type): Likewise.
(vectorizable_store): Adjust.
(vectorizable_load): Likewise.
2020-07-08 Richard Sandiford <richard.sandiford@arm.com>
PR middle-end/95694
* expr.c (expand_expr_real_2): Get the mode from the type rather
than the rtx, and assert that it is consistent with the mode of
the rtx (where known). Optimize all constant integers, not just
those that can be represented in poly_int64.
2020-07-08 Kewen Lin <linkw@linux.ibm.com>
* config/rs6000/vsx.md (len_load_v16qi): New define_expand.
(len_store_v16qi): Likewise.
2020-07-08 Kewen Lin <linkw@linux.ibm.com>
* doc/md.texi (len_load_@var{m}): Document.
(len_store_@var{m}): Likewise.
* internal-fn.c (len_load_direct): New macro.
(len_store_direct): Likewise.
(expand_len_load_optab_fn): Likewise.
(expand_len_store_optab_fn): Likewise.
(direct_len_load_optab_supported_p): Likewise.
(direct_len_store_optab_supported_p): Likewise.
(expand_mask_load_optab_fn): New macro. Original renamed to ...
(expand_partial_load_optab_fn): ... here. Add handlings for
len_load_optab.
(expand_mask_store_optab_fn): New macro. Original renamed to ...
(expand_partial_store_optab_fn): ... here. Add handlings for
len_store_optab.
(internal_load_fn_p): Handle IFN_LEN_LOAD.
(internal_store_fn_p): Handle IFN_LEN_STORE.
(internal_fn_stored_value_index): Handle IFN_LEN_STORE.
* internal-fn.def (LEN_LOAD): New internal function.
(LEN_STORE): Likewise.
* optabs.def (len_load_optab, len_store_optab): New optab.
2020-07-07 Anton Youdkevitch <anton.youdkevitch@bell-sw.com>
* config/aarch64/aarch64.c (thunderx2t99_regmove_cost,
thunderx2t99_vector_cost): Likewise.
2020-07-07 Richard Biener <rguenther@suse.de>
* tree-vect-data-refs.c (vect_analyze_data_ref_accesses): Fix
group overlap condition to allow negative step DR groups.
* tree-vect-stmts.c (get_group_load_store_type): For
multi element SLP groups force VMAT_STRIDED_SLP when the step
is negative.
2020-07-07 Qian Jianhua <qianjh@cn.fujitsu.com>
* doc/generic.texi: Fix typo.
2020-07-07 Richard Biener <rguenther@suse.de>
* lto-streamer-out.c (cmp_symbol_files): Use the computed
order map to sort symbols from the same sub-file together.
(lto_output): Compute a map of sub-file to an order number
it appears in the symbol output array.
2020-07-06 Richard Biener <rguenther@suse.de>
PR tree-optimization/96075
* tree-vect-data-refs.c (vect_compute_data_ref_alignment): Use
TYPE_SIZE_UNIT of the vector component type instead of DR_STEP
for the misalignment calculation for negative step.
2020-07-06 Roger Sayle <roger@nextmovesoftware.com>
* config/nvptx/nvptx.md (*vadd_addsi4): New instruction.
(*vsub_addsi4): New instruction.
2020-07-06 Hans-Peter Nilsson <hp@axis.com>
* config/cris/cris.md (movulsr): New peephole2.
2020-07-06 Hans-Peter Nilsson <hp@axis.com>
* config/cris/sync.md ("cris_atomic_fetch_<atomic_op_name><mode>_1"):
Correct gcc_assert of overlapping operands.
2020-07-05 Hans-Peter Nilsson <hp@axis.com>
* config/cris/cris.c (cris_select_cc_mode): Always return
CC_NZmode for matching comparisons. Clarify comments.
* config/cris/cris-modes.def: Clarify mode comment.
* config/cris/cris.md (plusminus, plusminusumin, plusumin): New
code iterators.
(addsub, addsubbo, nd): New code iterator attributes.
("*<addsub><su>qihi"): Rename from "*extopqihi". Use code
iterator constructs instead of match_operator constructs.
("*<addsubbo><su><nd><mode>si<setnz>"): Similar from
"*extop<mode>si<setnz>".
("*add<su>qihi_swap"): Similar from "*addxqihi_swap".
("*<addsubbo><su><nd><mode>si<setnz>_swap"): Similar from
"*extop<mode>si<setnz>_swap".
2020-07-05 Hans-Peter Nilsson <hp@axis.com>
* config/cris/cris.md ("*extopqihi", "*extop<mode>si<setnz>_swap")
("*extop<mode>si<setnz>", "*addxqihi_swap"): Reinstate.
2020-07-03 Eric Botcazou <ebotcazou@adacore.com>
* gimple-fold.c (gimple_fold_builtin_memory_op): Fold calls that
were initially created for the assignment of a variable-sized
object and whose source is now a string constant.
* gimple-ssa-store-merging.c (struct merged_store_group): Document
STRING_CST for rhs_code field.
Add string_concatenation boolean field.
(merged_store_group::merged_store_group): Initialize it as well as
bit_insertion here.
(merged_store_group::do_merge): Set it upon seeing a STRING_CST.
Also set bit_insertion here upon seeing a BIT_INSERT_EXPR.
(merged_store_group::apply_stores): Clear it for small regions.
Do not create a power-of-2-sized buffer if it is still true.
And do not set bit_insertion here again.
(encode_tree_to_bitpos): Deal with BLKmode for the expression.
(merged_store_group::can_be_merged_into): Deal with STRING_CST.
(imm_store_chain_info::coalesce_immediate_stores): Set bit_insertion
to true after changing MEM_REF stores into BIT_INSERT_EXPR stores.
(count_multiple_uses): Return 0 for STRING_CST.
(split_group): Do not split the group for a string concatenation.
(imm_store_chain_info::output_merged_store): Constify and rename
some local variables. Build an array type as destination type
for a string concatenation, as well as a zero mask, and call
build_string to build the source.
(lhs_valid_for_store_merging_p): Return true for VIEW_CONVERT_EXPR.
(pass_store_merging::process_store): Accept STRING_CST on the RHS.
* gimple.h (gimple_call_alloca_for_var_p): New accessor function.
* gimplify.c (gimplify_modify_expr_to_memcpy): Set alloca_for_var.
* tree.h (CALL_ALLOCA_FOR_VAR_P): Document it for BUILT_IN_MEMCPY.
2020-07-03 Martin Jambor <mjambor@suse.cz>
PR ipa/96040
* ipa-sra.c (all_callee_accesses_present_p): Do not accept type
mismatched accesses.
2020-07-03 Roger Sayle <roger@nextmovesoftware.com>
* config/nvptx/nvptx.md (popcount<mode>2): New instructions.
(mulhishi3, mulsidi3, umulhisi3, umulsidi3): New instructions.
2020-07-03 Martin Liska <mliska@suse.cz>
Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR bootstrap/96046
* gcov-dump.c (tag_function): Use gcov_position_t
type.
2020-07-03 Richard Biener <rguenther@suse.de>
PR tree-optimization/96037
* tree-vect-stmts.c (vect_is_simple_use): Initialize *slp_def.
2020-07-03 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_bb_slp_scalar_cost): Cost the
original non-pattern stmts, look at the pattern stmt
vectorization status.
2020-07-03 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn-valu.md (fold_left_plus_<mode>): New.
2020-07-03 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (vec_info::insert_on_entry): New.
(vec_info::insert_seq_on_entry): Likewise.
* tree-vectorizer.c (vec_info::insert_on_entry): Implement.
(vec_info::insert_seq_on_entry): Likewise.
* tree-vect-stmts.c (vect_init_vector_1): Use
vec_info::insert_on_entry.
(vect_finish_stmt_generation): Set modified bit after
adjusting VUSE.
* tree-vect-slp.c (vect_create_constant_vectors): Simplify
by using vec_info::insert_seq_on_entry and bypassing
vec_init_vector.
(vect_schedule_slp_instance): Deal with all-constant
children later.
2020-07-03 Roger Sayle <roger@nextmovesoftware.com>
Tom de Vries <tdevries@suse.de>
PR target/90932
* config/nvptx/nvptx.c (nvptx_vector_alignment): Use tree_to_uhwi
to access TYPE_SIZE (type). Return at least the mode's alignment.
2020-07-02 Richard Biener <rguenther@suse.de>
PR tree-optimization/96028
* tree-vect-slp.c (vect_slp_convert_to_external): Make sure
we have scalar stmts to use.
(vect_slp_analyze_node_operations): When analyzing a child
failed try externalizing the parent node.
2020-07-02 Martin Jambor <mjambor@suse.cz>
PR debug/95343
* ipa-param-manipulation.c (ipa_param_adjustments::modify_call): Adjust
argument index if necessary.
2020-07-02 Martin Liska <mliska@suse.cz>
PR middle-end/95830
* tree-vect-generic.c (expand_vector_condition): Forward declaration.
(expand_vector_comparison): Do not expand a comparison if all
uses are consumed by a VEC_COND_EXPR.
(expand_vector_operation): Change void return type to bool.
(expand_vector_operations_1): Pass dce_ssa_names.
2020-07-02 Ilya Leoshkevich <iii@linux.ibm.com>
PR bootstrap/95700
* system.h (NULL): Redefine to nullptr.
2020-07-02 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/95857
* tree-cfg.c (group_case_labels_stmt): When removing an unreachable
base_bb, remember all forced and non-local labels on it and later
treat those as if they have NULL label_to_block. Formatting fix.
Fix a comment typo.
2020-07-02 Richard Biener <rguenther@suse.de>
PR tree-optimization/96022
* tree-vect-stmts.c (vectorizable_shift): Only use the
first vector stmt when extracting the scalar shift amount.
* tree-vect-slp.c (vect_build_slp_tree_2): Also build unary
nodes with all-scalar children from scalars but not stores.
(vect_analyze_slp_instance): Mark the node not failed.
2020-07-02 Felix Yang <felix.yang@huawei.com>
PR tree-optimization/95961
* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Use the
number of scalars instead of the number of vectors as an upper bound
for the loop saving info about DR in the hash table. Remove unused
local variables.
2020-07-02 Jakub Jelinek <jakub@redhat.com>
* omp-expand.c (expand_omp_for): Diagnose non-rectangular loops with
invalid steps - ((m2 - m1) * incr_outer) % incr must be 0 in valid
OpenMP non-rectangular loops. Use XALLOCAVEC.
2020-07-02 Martin Liska <mliska@suse.cz>
PR gcov-profile/95348
* coverage.c (read_counts_file): Read only COUNTERS that are
not all-zero.
* gcov-dump.c (tag_function): Change signature from unsigned to
signed integer.
(tag_blocks): Likewise.
(tag_arcs): Likewise.
(tag_lines): Likewise.
(tag_counters): Likewise.
(tag_summary): Likewise.
* gcov.c (read_count_file): Read all non-zero counters
sensitively.
2020-07-02 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/multilib-generator (arch_canonicalize): Handle
multi-letter extension.
Using underline as separator between different extensions.
2020-07-01 Pip Cet <pipcet@gmail.com>
* spellcheck.c (test_data): Add problematic strings.
(test_metric_conditions): Don't test the triangle inequality
condition, which our distance function does not satisfy.
2020-07-01 Omar Tahir <omar.tahir@arm.com>
* config/aarch64/aarch64.c (aarch64_asm_trampoline_template): Always
generate a BTI instruction.
2020-07-01 Jeff Law <law@redhat.com>
PR tree-optimization/94882
* match.pd (x & y) - (x | y) - 1 -> ~(x ^ y): New simplification.
2020-07-01 Jeff Law <law@redhat.com>
* config/m68k/m68k.c (m68k_output_btst): Drop "register" keyword.
(emit_move_sequence, output_iorsi3, output_xorsi3): Likewise.
2020-07-01 Andrea Corallo <andrea.corallo@arm.com>
* config/aarch64/aarch64-builtins.c (aarch64_builtins): Add enums
for 64bits fpsr/fpcr getter setters builtin variants.
(aarch64_init_fpsr_fpcr_builtins): New function.
(aarch64_general_init_builtins): Modify to make use of the later.
(aarch64_expand_fpsr_fpcr_setter): New function.
(aarch64_general_expand_builtin): Modify to make use of the later.
* config/aarch64/aarch64.md (@aarch64_set_<fpscr_name><GPI:mode>)
(@aarch64_get_<fpscr_name><GPI:mode>): New patterns replacing and
generalizing 'get_fpcr', 'set_fpsr'.
* config/aarch64/iterators.md (GET_FPSCR, SET_FPSCR): New int
iterators.
(fpscr_name): New int attribute.
* doc/extend.texi (__builtin_aarch64_get_fpcr64)
(__builtin_aarch64_set_fpcr64, __builtin_aarch64_get_fpsr64)
(__builtin_aarch64_set_fpsr64): Add into AArch64 Built-in
Functions.
2020-07-01 Martin Liska <mliska@suse.cz>
* gcov.c (print_usage): Avoid trailing space for -j option.
2020-07-01 Richard Biener <rguenther@suse.de>
PR tree-optimization/95839
* tree-vect-slp.c (vect_slp_tree_uniform_p): Pre-existing
vectors are not uniform.
(vect_build_slp_tree_1): Handle BIT_FIELD_REFs of
vector registers.
(vect_build_slp_tree_2): For groups of lane extracts
from a vector register generate a permute node
with a special child representing the pre-existing vector.
(vect_prologue_cost_for_slp): Pre-existing vectors cost nothing.
(vect_slp_analyze_node_operations): Use SLP_TREE_LANES.
(vectorizable_slp_permutation): Do not generate or cost identity
permutes.
(vect_schedule_slp_instance): Handle pre-existing vector
that are function arguments.
2020-07-01 Richard Biener <rguenther@suse.de>
* system.h (INCLUDE_ISL): New guarded include.
* graphite-dependences.c: Use it.
* graphite-isl-ast-to-gimple.c: Likewise.
* graphite-optimize-isl.c: Likewise.
* graphite-poly.c: Likewise.
* graphite-scop-detection.c: Likewise.
* graphite-sese-to-poly.c: Likewise.
* graphite.c: Likewise.
* graphite.h: Drop the includes here.
2020-07-01 Martin Liska <mliska@suse.cz>
* gcov.c (print_usage): Shorted option description for -j
option.
2020-07-01 Martin Liska <mliska@suse.cz>
* doc/gcov.texi: Rename 2 options.
* gcov.c (print_usage): Rename -i,--json-format to
-j,--json-format and -j,--human-readable to -H,--human-readable.
(process_args): Fix up parsing. Document obsolete options and
how are they changed.
2020-07-01 Jeff Law <law@redhat.com>
* config/pa/pa.c (pa_emit_move_sequence): Drop register keyword.
(pa_output_ascii): Likewise.
2020-07-01 Kito Cheng <kito.cheng@sifive.com>
* common/config/riscv/riscv-common.c (riscv_subset_t): New field
added.
(riscv_subset_list::parsing_subset_version): Add parameter for
indicate explicitly version, and handle explicitly version.
(riscv_subset_list::handle_implied_ext): Ditto.
(riscv_subset_list::add): Ditto.
(riscv_subset_t::riscv_subset_t): Init new field.
(riscv_subset_list::to_string): Always output version info if version
explicitly specified.
(riscv_subset_list::parsing_subset_version): Handle explicitly
arch version.
(riscv_subset_list::parse_std_ext): Ditto.
(riscv_subset_list::parse_multiletter_ext): Ditto.
2020-06-30 Richard Sandiford <richard.sandiford@arm.com>
PR target/92789
PR target/95726
* config/aarch64/aarch64.c (aarch64_attribute_table): Add
"Advanced SIMD type".
(aarch64_comp_type_attributes): Check that the "Advanced SIMD type"
attributes are equal.
* config/aarch64/aarch64-builtins.c: Include stringpool.h and
attribs.h.
(aarch64_mangle_builtin_vector_type): Use the mangling recorded
in the "Advanced SIMD type" attribute.
(aarch64_init_simd_builtin_types): Add an "Advanced SIMD type"
attribute to each Advanced SIMD type, using the mangled type
as the attribute's single argument.
2020-06-30 Christophe Lyon <christophe.lyon@linaro.org>
PR target/94743
* config/arm/arm.c (arm_handle_isr_attribute): Warn if
-mgeneral-regs-only is not used.
2020-06-30 Yang Yang <yangyang305@huawei.com>
PR tree-optimization/95855
* gimple-ssa-split-paths.c (is_feasible_trace): Add extra
checks to recognize a missed if-conversion opportunity when
judging whether to duplicate a block.
2020-06-29 Segher Boessenkool <segher@kernel.crashing.org>
* doc/extend.texi: Change references to "future architecture" to
"ISA 3.1", "-mcpu=future" to "-mcpu=power10", and remove vaguer
references to "future" (because the future is now).
2020-06-29 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/rs6000.md (isa): Rename "fut" to "p10".
2020-06-29 Roger Sayle <roger@nextmovesoftware.com>
* simplify-rtx.c (simplify_distributive_operation): New function
to un-distribute a binary operation of two binary operations.
(X & C) ^ (Y & C) to (X ^ Y) & C, when C is simple (i.e. a constant).
(simplify_binary_operation_1) <IOR, XOR, AND>: Call it from here
when appropriate.
(test_scalar_int_ops): New function for unit self-testing
scalar integer transformations in simplify-rtx.c.
(test_scalar_ops): Call test_scalar_int_ops for each integer mode.
(simplify_rtx_c_tests): Call test_scalar_ops.
2020-06-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/95916
* tree-vect-slp.c (vect_schedule_slp_instance): Explicitely handle
the case of not vectorized externals.
2020-06-29 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h: Do not include <utility>.
2020-06-29 Martin Liska <mliska@suse.cz>
* tree-ssa-ccp.c (gsi_prev_dom_bb_nondebug): Use gsi_bb
instead of gimple_stmt_iterator::bb.
* tree-ssa-math-opts.c (insert_reciprocals): Likewise.
* tree-vectorizer.h: Likewise.
2020-06-29 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn-hsa.h (DBX_REGISTER_NUMBER): New macro.
* config/gcn/gcn-protos.h (gcn_dwarf_register_number): New prototype.
* config/gcn/gcn.c (gcn_expand_prologue): Add RTX_FRAME_RELATED_P
and REG_FRAME_RELATED_EXPR to stack and frame pointer adjustments.
(gcn_dwarf_register_number): New function.
(gcn_dwarf_register_span): New function.
(TARGET_DWARF_REGISTER_SPAN): New hook macro.
2020-06-29 Kaipeng Zhou <zhoukaipeng3@huawei.com>
PR tree-optimization/95854
* gimple-ssa-store-merging.c (find_bswap_or_nop_1): Return NULL
if operand 1 or 2 of a BIT_FIELD_REF cannot be converted to
unsigned HOST_WIDE_INT.
2020-06-29 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* config/sparc/sparc.c (epilogue_renumber): Remove register.
(sparc_print_operand_address): Likewise.
(sparc_type_code): Likewise.
(set_extends): Likewise.
2020-06-29 Martin Liska <mliska@suse.cz>
PR tree-optimization/92860
* optc-save-gen.awk: Add exceptions for arc target.
2020-06-29 Frederik Harwath <frederik@codesourcery.com>
* doc/sourcebuild.texi: Describe globbing of the
dump file scanning commands "suffix" argument.
2020-06-28 Martin Sebor <msebor@redhat.com>
PR c++/86568
* calls.c (maybe_warn_rdwr_sizes): Use location of argument if
available.
* tree-ssa-ccp.c (pass_post_ipa_warn::execute): Same. Adjust
indentation.
* tree.c (get_nonnull_args): Consider the this pointer implicitly
nonnull.
* var-tracking.c (deps_vec): New type.
(var_loc_dep_vec): New function.
(VAR_LOC_DEP_VEC): Use it.
2020-06-28 Kewen Lin <linkw@linux.ibm.com>
* internal-fn.c (direct_mask_load_optab_supported_p): Use
convert_optab_supported_p instead of direct_optab_supported_p.
(direct_mask_store_optab_supported_p): Likewise.
2020-06-27 Aldy Hernandez <aldyh@redhat.com>
* gimple-ssa-evrp-analyze.h (vrp_visit_cond_stmt): Use
simplify_using_ranges class.
* gimple-ssa-evrp.c (class evrp_folder): New simplify_using_ranges
field. Adjust all methods to use new field.
* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Use
simplify_using_ranges class.
* tree-vrp.c (class vrp_folder): New simplify_using_ranges
field. Adjust all methods to use new field.
(simplify_stmt_for_jump_threading): Use simplify_using_ranges class.
(vrp_prop::vrp_finalize): New vrp_folder argument.
(execute_vrp): Pass folder to vrp_finalize. Use
simplify_using_ranges class.
Remove cleanup_edges_and_switches call.
* vr-values.c (vr_values::op_with_boolean_value_range_p): Change
value_range_equiv uses to value_range.
(simplify_using_ranges::op_with_boolean_value_range_p): Use
simplify_using_ranges class.
(check_for_binary_op_overflow): Make static.
(vr_values::extract_range_basic): Pass this to
check_for_binary_op_overflow.
(compare_range_with_value): Change value_range_equiv uses to
value_range.
(vr_values::vr_values): Initialize simplifier field.
Remove uses of to_remove_edges and to_update_switch_stmts.
(vr_values::~vr_values): Remove uses of to_remove_edges and
to_update_switch_stmts.
(vr_values::get_vr_for_comparison): Move to simplify_using_ranges
class.
(vr_values::compare_name_with_value): Same.
(vr_values::compare_names): Same.
(vr_values::vrp_evaluate_conditional_warnv_with_ops): Same.
(vr_values::vrp_evaluate_conditional): Same.
(vr_values::vrp_visit_cond_stmt): Same.
(find_case_label_ranges): Change value_range_equiv uses to
value_range.
(vr_values::extract_range_from_stmt): Use simplify_using_ranges class.
(vr_values::simplify_truth_ops_using_ranges): Move to
simplify_using_ranges class.
(vr_values::simplify_div_or_mod_using_ranges): Same.
(vr_values::simplify_min_or_max_using_ranges): Same.
(vr_values::simplify_abs_using_ranges): Same.
(vr_values::simplify_bit_ops_using_ranges): Same.
(test_for_singularity): Change value_range_equiv uses to
value_range.
(range_fits_type_p): Same.
(vr_values::simplify_cond_using_ranges_1): Same.
(vr_values::simplify_cond_using_ranges_2): Make extern.
(vr_values::fold_cond): Move to simplify_using_ranges class.
(vr_values::simplify_switch_using_ranges): Same.
(vr_values::cleanup_edges_and_switches): Same.
(vr_values::simplify_float_conversion_using_ranges): Same.
(vr_values::simplify_internal_call_using_ranges): Same.
(vr_values::two_valued_val_range_p): Same.
(vr_values::simplify_stmt_using_ranges): Move to...
(simplify_using_ranges::simplify): ...here.
* vr-values.h (class vr_values): Move all the simplification of
statements using ranges methods and code from here...
(class simplify_using_ranges): ...to here.
(simplify_cond_using_ranges_2): New extern prototype.
2020-06-27 Jakub Jelinek <jakub@redhat.com>
* omp-general.h (struct omp_for_data_loop): Add non_rect_referenced
member, move outer member.
(struct omp_for_data): Add first_nonrect and last_nonrect members.
* omp-general.c (omp_extract_for_data): Initialize first_nonrect,
last_nonrect and non_rect_referenced members.
* omp-expand.c (expand_omp_for_init_counts): Handle non-rectangular
loops.
(expand_omp_for_init_vars): Add nonrect_bounds parameter. Handle
non-rectangular loops.
(extract_omp_for_update_vars): Likewise.
(expand_omp_for_generic, expand_omp_for_static_nochunk,
expand_omp_for_static_chunk, expand_omp_simd,
expand_omp_taskloop_for_outer, expand_omp_taskloop_for_inner): Adjust
expand_omp_for_init_vars and extract_omp_for_update_vars callers.
(expand_omp_for): Don't sorry on non-composite worksharing-loop or
distribute.
2020-06-26 H.J. Lu <hjl.tools@gmail.com>
PR target/95655
* config/i386/gnu-user.h (SUBTARGET_FRAME_POINTER_REQUIRED):
Removed.
* config/i386/i386.c (ix86_frame_pointer_required): Update
comments.
2020-06-26 Yichao Yu <yyc1992@gmail.com>
* multiple_target.c (redirect_to_specific_clone): Fix tests
to check individual attribute rather than an attribute list.
2020-06-26 Peter Bergner <bergner@linux.ibm.com>
* config/rs6000/rs6000-call.c (cpu_is_info) <power10>: New.
* doc/extend.texi (PowerPC Built-in Functions): Document power10,
arch_3_1 and mma.
2020-06-26 Marek Polacek <polacek@redhat.com>
* doc/invoke.texi (C Dialect Options): Adjust -std default for C++.
* doc/standards.texi (C Language): Correct the default dialect.
(C++ Language): Update the default for C++ to gnu++17.
2020-06-26 Eric Botcazou <ebotcazou@adacore.com>
* tree-ssa-reassoc.c (dump_range_entry): New function.
(debug_range_entry): New debug function.
(update_range_test): Invoke dump_range_entry for dumping.
(optimize_range_tests_to_bit_test): Merge the entry test in the
bit test when possible and lower the profitability threshold.
2020-06-26 Richard Biener <rguenther@suse.de>
PR tree-optimization/95897
* tree-vectorizer.h (vectorizable_induction): Remove
unused gimple_stmt_iterator * parameter.
* tree-vect-loop.c (vectorizable_induction): Likewise.
(vect_analyze_loop_operations): Adjust.
* tree-vect-stmts.c (vect_analyze_stmt): Likewise.
(vect_transform_stmt): Likewise.
* tree-vect-slp.c (vect_schedule_slp_instance): Adjust
for fold-left reductions, clarify existing reduction case.
2020-06-25 Nick Clifton <nickc@redhat.com>
* config/m32r/m32r.md (movsicc): Disable pattern.
2020-06-25 Richard Biener <rguenther@suse.de>
PR tree-optimization/95839
* tree-vect-slp.c (vect_slp_analyze_bb_1): Remove premature
check on the number of datarefs.
2020-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/rs6000-call.c (mma_init_builtins): Cast
the insn_data n_operands value to unsigned.
2020-06-25 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_schedule_slp_instance): Always use
vector defs to determine insertion place.
2020-06-25 H.J. Lu <hjl.tools@gmail.com>
PR target/95874
* config/i386/i386.h (PTA_ICELAKE_CLIENT): Remove PTA_CLWB.
(PTA_ICELAKE_SERVER): Add PTA_CLWB.
(PTA_TIGERLAKE): Add PTA_CLWB.
2020-06-25 Richard Biener <rguenther@suse.de>
PR tree-optimization/95866
* tree-vect-stmts.c (vectorizable_shift): Reject incompatible
vectorized shift operands. For scalar shifts use lane zero
of a vectorized shift operand.
2020-06-25 Martin Liska <mliska@suse.cz>
PR tree-optimization/95745
PR middle-end/95830
* gimple-isel.cc (gimple_expand_vec_cond_exprs): Delete dead
SSA_NAMEs used as the first argument of a VEC_COND_EXPR. Always
return 0.
* tree-vect-generic.c (expand_vector_condition): Remove dead
SSA_NAMEs used as the first argument of a VEC_COND_EXPR.
2020-06-24 Will Schmidt <will_schmidt@vnet.ibm.com>
PR target/94954
* config/rs6000/altivec.h (vec_pack_to_short_fp32): Update.
* config/rs6000/altivec.md (UNSPEC_CONVERT_4F32_8F16): New unspec.
(convert_4f32_8f16): New define_expand
* config/rs6000/rs6000-builtin.def (convert_4f32_8f16): New builtin define
and overload.
* config/rs6000/rs6000-call.c (P9V_BUILTIN_VEC_CONVERT_4F32_8F16): New
overloaded builtin entry.
* config/rs6000/vsx.md (UNSPEC_VSX_XVCVSPHP): New unspec.
(vsx_xvcvsphp): New define_insn.
2020-06-24 Roger Sayle <roger@nextmovesoftware.com>
Segher Boessenkool <segher@kernel.crashing.org>
* simplify-rtx.c (simplify_unary_operation_1): Simplify rotates by 0.
2020-06-24 Roger Sayle <roger@nextmovesoftware.com>
* simplify-rtx.c (simplify_unary_operation_1): Simplify
(parity (parity x)) as (parity x), i.e. PARITY is idempotent.
2020-06-24 Richard Biener <rguenther@suse.de>
PR tree-optimization/95866
* tree-vect-slp.c (vect_slp_tree_uniform_p): New.
(vect_build_slp_tree_2): Properly reset matches[0],
ignore uniform constants.
2020-06-24 H.J. Lu <hjl.tools@gmail.com>
PR target/95660
* common/config/i386/cpuinfo.h (get_intel_cpu): Remove brand_id.
(cpu_indicator_init): Likewise.
* config/i386/driver-i386.c (host_detect_local_cpu): Updated.
2020-06-24 H.J. Lu <hjl.tools@gmail.com>
PR target/95774
* common/config/i386/cpuinfo.h (get_intel_cpu): Add Cooper Lake
detection with AVX512BF16.
2020-06-24 H.J. Lu <hjl.tools@gmail.com>
PR target/95843
* common/config/i386/i386-isas.h: New file. Extracted from
gcc/config/i386/i386-builtins.c.
(_isa_names_table): Add option.
(ISA_NAMES_TABLE_START): New.
(ISA_NAMES_TABLE_END): Likewise.
(ISA_NAMES_TABLE_ENTRY): Likewise.
(isa_names_table): Defined with ISA_NAMES_TABLE_START,
ISA_NAMES_TABLE_END and ISA_NAMES_TABLE_ENTRY. Add more ISAs
from enum processor_features.
* config/i386/driver-i386.c: Include
"common/config/i386/cpuinfo.h" and
"common/config/i386/i386-isas.h".
(has_feature): New macro.
(host_detect_local_cpu): Call cpu_indicator_init to get CPU
features. Use has_feature to detect processor features. Call
Call get_intel_cpu to get the newer Intel CPU name. Use
isa_names_table to generate command-line options.
* config/i386/i386-builtins.c: Include
"common/config/i386/i386-isas.h".
(_arch_names_table): Removed.
(isa_names_table): Likewise.
2020-06-24 H.J. Lu <hjl.tools@gmail.com>
PR target/95259
* common/config/i386/cpuinfo.h: New file.
(__processor_model): Moved from libgcc/config/i386/cpuinfo.h.
(__processor_model2): New.
(CHECK___builtin_cpu_is): New. Defined as empty if not defined.
(has_cpu_feature): New function.
(set_cpu_feature): Likewise.
(get_amd_cpu): Moved from libgcc/config/i386/cpuinfo.c. Use
CHECK___builtin_cpu_is. Return AMD CPU name.
(get_intel_cpu): Moved from libgcc/config/i386/cpuinfo.c. Use
Use CHECK___builtin_cpu_is. Return Intel CPU name.
(get_available_features): Moved from libgcc/config/i386/cpuinfo.c.
Also check FEATURE_3DNOW, FEATURE_3DNOWP, FEATURE_ADX,
FEATURE_ABM, FEATURE_CLDEMOTE, FEATURE_CLFLUSHOPT, FEATURE_CLWB,
FEATURE_CLZERO, FEATURE_CMPXCHG16B, FEATURE_CMPXCHG8B,
FEATURE_ENQCMD, FEATURE_F16C, FEATURE_FSGSBASE, FEATURE_FXSAVE,
FEATURE_HLE, FEATURE_IBT, FEATURE_LAHF_LM, FEATURE_LM,
FEATURE_LWP, FEATURE_LZCNT, FEATURE_MOVBE, FEATURE_MOVDIR64B,
FEATURE_MOVDIRI, FEATURE_MWAITX, FEATURE_OSXSAVE,
FEATURE_PCONFIG, FEATURE_PKU, FEATURE_PREFETCHWT1, FEATURE_PRFCHW,
FEATURE_PTWRITE, FEATURE_RDPID, FEATURE_RDRND, FEATURE_RDSEED,
FEATURE_RTM, FEATURE_SERIALIZE, FEATURE_SGX, FEATURE_SHA,
FEATURE_SHSTK, FEATURE_TBM, FEATURE_TSXLDTRK, FEATURE_VAES,
FEATURE_WAITPKG, FEATURE_WBNOINVD, FEATURE_XSAVE, FEATURE_XSAVEC,
FEATURE_XSAVEOPT and FEATURE_XSAVES
(cpu_indicator_init): Moved from libgcc/config/i386/cpuinfo.c.
Also update cpu_model2.
* common/config/i386/i386-cpuinfo.h (processor_vendor): Add
Add VENDOR_CENTAUR, VENDOR_CYRIX and VENDOR_NSC.
(processor_features): Moved from gcc/config/i386/i386-builtins.c.
Renamed F_XXX to FEATURE_XXX. Add FEATURE_3DNOW, FEATURE_3DNOWP,
FEATURE_ADX, FEATURE_ABM, FEATURE_CLDEMOTE, FEATURE_CLFLUSHOPT,
FEATURE_CLWB, FEATURE_CLZERO, FEATURE_CMPXCHG16B,
FEATURE_CMPXCHG8B, FEATURE_ENQCMD, FEATURE_F16C,
FEATURE_FSGSBASE, FEATURE_FXSAVE, FEATURE_HLE, FEATURE_IBT,
FEATURE_LAHF_LM, FEATURE_LM, FEATURE_LWP, FEATURE_LZCNT,
FEATURE_MOVBE, FEATURE_MOVDIR64B, FEATURE_MOVDIRI,
FEATURE_MWAITX, FEATURE_OSXSAVE, FEATURE_PCONFIG,
FEATURE_PKU, FEATURE_PREFETCHWT1, FEATURE_PRFCHW,
FEATURE_PTWRITE, FEATURE_RDPID, FEATURE_RDRND, FEATURE_RDSEED,
FEATURE_RTM, FEATURE_SERIALIZE, FEATURE_SGX, FEATURE_SHA,
FEATURE_SHSTK, FEATURE_TBM, FEATURE_TSXLDTRK, FEATURE_VAES,
FEATURE_WAITPKG, FEATURE_WBNOINVD, FEATURE_XSAVE, FEATURE_XSAVEC,
FEATURE_XSAVEOPT, FEATURE_XSAVES and CPU_FEATURE_MAX.
(SIZE_OF_CPU_FEATURES): New.
* config/i386/i386-builtins.c (processor_features): Removed.
(isa_names_table): Replace F_XXX with FEATURE_XXX.
(fold_builtin_cpu): Change __cpu_features2 to an array.
2020-06-24 H.J. Lu <hjl.tools@gmail.com>
PR target/95842
* common/config/i386/i386-common.c (processor_alias_table): Add
processor model and priority to each entry.
(pta_size): Updated with -6.
(num_arch_names): New.
* common/config/i386/i386-cpuinfo.h: New file.
* config/i386/i386-builtins.c (feature_priority): Removed.
(processor_model): Likewise.
(_arch_names_table): Likewise.
(arch_names_table): Likewise.
(_isa_names_table): Replace P_ZERO with P_NONE.
(get_builtin_code_for_version): Replace P_ZERO with P_NONE. Use
processor_alias_table.
(fold_builtin_cpu): Replace arch_names_table with
processor_alias_table.
* config/i386/i386.h: Include "common/config/i386/i386-cpuinfo.h".
(pta): Add model and priority.
(num_arch_names): New.
2020-06-24 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (vect_find_first_scalar_stmt_in_slp):
Declare.
* tree-vect-data-refs.c (vect_preserves_scalar_order_p):
Simplify for new position of vectorized SLP loads.
(vect_slp_analyze_node_dependences): Adjust for it.
(vect_slp_analyze_and_verify_node_alignment): Compute alignment
for the first stmts dataref.
* tree-vect-slp.c (vect_find_first_scalar_stmt_in_slp): New.
(vect_schedule_slp_instance): Emit loads before the
first scalar stmt.
* tree-vect-stmts.c (vectorizable_load): Do what the comment
says and use vect_find_first_scalar_stmt_in_slp.
2020-06-24 Richard Biener <rguenther@suse.de>
PR tree-optimization/95856
* tree-vectorizer.c (vect_stmt_dominates_stmt_p): Honor
region marker -1u.
2020-06-24 Jakub Jelinek <jakub@redhat.com>
PR middle-end/95810
* fold-const.c (fold_cond_expr_with_comparison): Optimize
A <= 0 ? A : -A into (type)-absu(A) rather than -abs(A).
2020-06-24 Jakub Jelinek <jakub@redhat.com>
* omp-low.c (lower_omp_for): Fix two pastos.
2020-06-24 Martin Liska <mliska@suse.cz>
* optc-save-gen.awk: Compare string options in cl_optimization_compare
by strcmp.
2020-06-23 Aaron Sawdey <acsawdey@linux.ibm.com>
* config.gcc: Identify power10 as a 64-bit processor and as valid
for --with-cpu and --with-tune.
2020-06-23 David Edelsohn <dje.gcc@gmail.com>
* Makefile.in (LANG_MAKEFRAGS): Same.
(tmake_file): Use -include.
(xmake_file): Same.
2020-06-23 Michael Meissner <meissner@linux.ibm.com>
* REVISION: Delete file meant for a private branch.
2020-06-23 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR target/95646
* config/arm/arm.c: (cmse_nonsecure_entry_clear_before_return): Use
'callee_saved_reg_p' instead of 'calL_used_or_fixed_reg_p'.
2020-06-23 Alexandre Oliva <oliva@adacore.com>
* collect-utils.h (dumppfx): New.
* collect-utils.c (dumppfx): Likewise.
* lto-wrapper.c (run_gcc): Set global dumppfx.
(compile_offload_image): Pass a -dumpbase on to mkoffload.
* config/nvptx/mkoffload.c (ptx_dumpbase): New.
(main): Handle incoming -dumpbase. Set ptx_dumpbase. Obey
save_temps.
(compile_native): Pass -dumpbase et al to compiler.
* config/gcn/mkoffload.c (gcn_dumpbase): New.
(main): Handle incoming -dumpbase. Set gcn_dumpbase. Obey
save_temps. Pass -dumpbase et al to offload target compiler.
(compile_native): Pass -dumpbase et al to compiler.
2020-06-23 Michael Meissner <meissner@linux.ibm.com>
* REVISION: New file.
2020-06-22 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/altivec.h: Use _ARCH_PWR10, not _ARCH_PWR_FUTURE.
Update comment for ISA 3.1.
* config/rs6000/altivec.md: Use TARGET_POWER10, not TARGET_FUTURE.
* config/rs6000/driver-rs6000.c (asm_names): Use -mpwr10 for power10
on AIX, and -mpower10 elsewhere.
* config/rs6000/future.md: Delete.
* config/rs6000/linux64.h: Update comments. Use TARGET_POWER10, not
TARGET_FUTURE.
* config/rs6000/power10.md: New file.
* config/rs6000/ppc-auxv.h: Use PPC_PLATFORM_POWER10, not
PPC_PLATFORM_FUTURE.
* config/rs6000/rs6000-builtin.def: Update comments. Use BU_P10V_*
names instead of BU_FUTURE_V_* names. Use RS6000_BTM_P10 instead of
RS6000_BTM_FUTURE. Use P10_BUILTIN_* instead of FUTURE_BUILTIN_*.
Use BU_P10_* instead of BU_FUTURE_*.
* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
_ARCH_PWR10 instead of _ARCH_PWR_FUTURE.
(altivec_resolve_overloaded_builtin): Use P10_BUILTIN_VEC_XXEVAL, not
FUTURE_BUILTIN_VEC_XXEVAL.
* config/rs6000/rs6000-call.c: Use P10_BUILTIN_*, not FUTURE_BUILTIN_*.
Update compiler messages.
* config/rs6000/rs6000-cpus.def: Update comments. Use ISA_3_1_*, not
ISA_FUTURE_*. Use OPTION_MASK_POWER10, not OPTION_MASK_FUTURE.
* config/rs6000/rs6000-opts.h: Use PROCESSOR_POWER10, not
PROCESSOR_FUTURE.
* config/rs6000/rs6000-string.c: Ditto.
* config/rs6000/rs6000-tables.opt (rs6000_cpu_opt_value): Use "power10"
instead of "future", reorder it to right after "power9".
* config/rs6000/rs6000.c: Update comments. Use OPTION_MASK_POWER10,
not OPTION_MASK_FUTURE. Use TARGET_POWER10, not TARGET_FUTURE. Use
RS6000_BTM_P10, not RS6000_BTM_FUTURE. Update compiler messages.
Use PROCESSOR_POWER10, not PROCESSOR_FUTURE. Use ISA_3_1_MASKS_SERVER,
not ISA_FUTURE_MASKS_SERVER.
(rs6000_opt_masks): Use "power10" instead of "future".
(rs6000_builtin_mask_names): Ditto.
(rs6000_disable_incompatible_switches): Ditto.
* config/rs6000/rs6000.h: Use -mpower10, not -mfuture. Use
-mcpu=power10, not -mcpu=future. Use MASK_POWER10, not MASK_FUTURE.
Use OPTION_MASK_POWER10, not OPTION_MASK_FUTURE. Use RS6000_BTM_P10,
not RS6000_BTM_FUTURE.
* config/rs6000/rs6000.md: Use "power10", not "future". Use
TARGET_POWER10, not TARGET_FUTURE. Include "power10.md", not
"future.md".
* config/rs6000/rs6000.opt (mfuture): Delete.
(mpower10): New.
* config/rs6000/t-rs6000: Use "power10.md", not "future.md".
* config/rs6000/vsx.md: Use TARGET_POWER10, not TARGET_FUTURE.
2020-06-22 Richard Sandiford <richard.sandiford@arm.com>
* coretypes.h (first_type): Delete.
* recog.h (insn_gen_fn::operator()): Go back to using a decltype.
2020-06-22 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* doc/sourcebuild.texi (arm_v8_1m_mve_fp_ok): Add item.
(arm_mve_hw): Likewise.
2020-06-22 H.J. Lu <hjl.tools@gmail.com>
PR target/95791
* config/i386/i386.c (ix86_dirflag_mode_needed): Skip
EXT_REX_SSE_REG_P.
2020-06-22 Richard Biener <rguenther@suse.de>
PR tree-optimization/95770
* tree-vect-slp.c (vect_schedule_slp_instance): Also consider
external defs.
2020-06-22 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn.c (gcn_function_arg): Disallow vector arguments.
(gcn_return_in_memory): Return vectors in memory.
2020-06-22 Jakub Jelinek <jakub@redhat.com>
* omp-general.c (omp_extract_for_data): For triangular loops with
all loop invariant expressions constant where the innermost loop is
executed at least once compute number of iterations at compile time.
2020-06-22 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/riscv.h (ASM_SPEC): Remove riscv_expand_arch call.
(DRIVER_SELF_SPECS): New.
2020-06-22 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/riscv-builtins.c (RISCV_FTYPE_NAME0): New.
(RISCV_FTYPE_ATYPES0): New.
(riscv_builtins): Using RISCV_USI_FTYPE for frflags.
* config/riscv/riscv-ftypes.def: Remove VOID argument.
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* config.gcc: Use t-aix64, biarch64 and default64 for cpu_is_64bit.
* config/rs6000/aix72.h (ASM_SPEC): Remove aix64 option.
(ASM_SPEC32): New.
(ASM_SPEC64): New.
(ASM_CPU_SPEC): Remove vsx and altivec options.
(CPP_SPEC_COMMON): Rename from CPP_SPEC.
(CPP_SPEC32): New.
(CPP_SPEC64): New.
(CPLUSPLUS_CPP_SPEC): Rename to CPLUSPLUS_CPP_SPEC_COMMON..
(TARGET_DEFAULT): Only define if not BIARCH.
(LIB_SPEC_COMMON): Rename from LIB_SPEC.
(LIB_SPEC32): New.
(LIB_SPEC64): New.
(LINK_SPEC_COMMON): Rename from LINK_SPEC.
(LINK_SPEC32): New.
(LINK_SPEC64): New.
(STARTFILE_SPEC): Add 64 bit version of crtcxa and crtdbase.
(ASM_SPEC): Define 32 and 64 bit alternatives using DEFAULT_ARCH64_P.
(CPP_SPEC): Same.
(CPLUSPLUS_CPP_SPEC): Same.
(LIB_SPEC): Same.
(LINK_SPEC): Same.
(SUBTARGET_EXTRA_SPECS): Add new 32/64 specs.
* config/rs6000/defaultaix64.h: New file.
* config/rs6000/t-aix64: New file.
2020-06-21 Peter Bergner <bergner@linux.ibm.com>
* config/rs6000/predicates.md (mma_assemble_input_operand): New.
* config/rs6000/rs6000-builtin.def (BU_MMA_1, BU_MMA_V2, BU_MMA_3,
BU_MMA_5, BU_MMA_6, BU_VSX_1): Add support macros for defining MMA
built-in functions.
(ASSEMBLE_ACC, ASSEMBLE_PAIR, DISASSEMBLE_ACC, DISASSEMBLE_PAIR,
PMXVBF16GER2, PMXVBF16GER2NN, PMXVBF16GER2NP, PMXVBF16GER2PN,
PMXVBF16GER2PP, PMXVF16GER2, PMXVF16GER2NN, PMXVF16GER2NP,
PMXVF16GER2PN, PMXVF16GER2PP, PMXVF32GER, PMXVF32GERNN,
PMXVF32GERNP, PMXVF32GERPN, PMXVF32GERPP, PMXVF64GER, PMXVF64GERNN,
PMXVF64GERNP, PMXVF64GERPN, PMXVF64GERPP, PMXVI16GER2, PMXVI16GER2PP,
PMXVI16GER2S, PMXVI16GER2SPP, PMXVI4GER8, PMXVI4GER8PP, PMXVI8GER4,
PMXVI8GER4PP, PMXVI8GER4SPP, XVBF16GER2, XVBF16GER2NN, XVBF16GER2NP,
XVBF16GER2PN, XVBF16GER2PP, XVCVBF16SP, XVCVSPBF16, XVF16GER2,
XVF16GER2NN, XVF16GER2NP, XVF16GER2PN, XVF16GER2PP, XVF32GER,
XVF32GERNN, XVF32GERNP, XVF32GERPN, XVF32GERPP, XVF64GER, XVF64GERNN,
XVF64GERNP, XVF64GERPN, XVF64GERPP, XVI16GER2, XVI16GER2PP, XVI16GER2S,
XVI16GER2SPP, XVI4GER8, XVI4GER8PP, XVI8GER4, XVI8GER4PP, XVI8GER4SPP,
XXMFACC, XXMTACC, XXSETACCZ): Add MMA built-ins.
* config/rs6000/rs6000.c (rs6000_emit_move): Use CONST_INT_P.
Allow zero constants.
(print_operand) <case 'A'>: New output modifier.
(rs6000_split_multireg_move): Add support for inserting accumulator
priming and depriming instructions. Add support for splitting an
assemble accumulator pattern.
* config/rs6000/rs6000-call.c (mma_init_builtins, mma_expand_builtin,
rs6000_gimple_fold_mma_builtin): New functions.
(RS6000_BUILTIN_M): New macro.
(def_builtin): Handle RS6000_BTC_QUAD and RS6000_BTC_PAIR attributes.
(bdesc_mma): Add new MMA built-in support.
(htm_expand_builtin): Use RS6000_BTC_OPND_MASK.
(rs6000_invalid_builtin): Add handling of RS6000_BTM_FUTURE and
RS6000_BTM_MMA.
(rs6000_builtin_valid_without_lhs): Handle RS6000_BTC_VOID attribute.
(rs6000_gimple_fold_builtin): Call rs6000_builtin_is_supported_p
and rs6000_gimple_fold_mma_builtin.
(rs6000_expand_builtin): Call mma_expand_builtin.
Use RS6000_BTC_OPND_MASK.
(rs6000_init_builtins): Adjust comment. Call mma_init_builtins.
(htm_init_builtins): Use RS6000_BTC_OPND_MASK.
(builtin_function_type): Handle VSX_BUILTIN_XVCVSPBF16 and
VSX_BUILTIN_XVCVBF16SP.
* config/rs6000/rs6000.h (RS6000_BTC_QUINARY, RS6000_BTC_SENARY,
RS6000_BTC_OPND_MASK, RS6000_BTC_QUAD, RS6000_BTC_PAIR,
RS6000_BTC_QUADPAIR, RS6000_BTC_GIMPLE): New defines.
(RS6000_BTC_PREDICATE, RS6000_BTC_ABS, RS6000_BTC_DST,
RS6000_BTC_TYPE_MASK, RS6000_BTC_ATTR_MASK): Adjust values.
* config/rs6000/mma.md (MAX_MMA_OPERANDS): New define_constant.
(UNSPEC_MMA_ASSEMBLE_ACC, UNSPEC_MMA_PMXVBF16GER2,
UNSPEC_MMA_PMXVBF16GER2NN, UNSPEC_MMA_PMXVBF16GER2NP,
UNSPEC_MMA_PMXVBF16GER2PN, UNSPEC_MMA_PMXVBF16GER2PP,
UNSPEC_MMA_PMXVF16GER2, UNSPEC_MMA_PMXVF16GER2NN,
UNSPEC_MMA_PMXVF16GER2NP, UNSPEC_MMA_PMXVF16GER2PN,
UNSPEC_MMA_PMXVF16GER2PP, UNSPEC_MMA_PMXVF32GER,
UNSPEC_MMA_PMXVF32GERNN, UNSPEC_MMA_PMXVF32GERNP,
UNSPEC_MMA_PMXVF32GERPN, UNSPEC_MMA_PMXVF32GERPP,
UNSPEC_MMA_PMXVF64GER, UNSPEC_MMA_PMXVF64GERNN,
UNSPEC_MMA_PMXVF64GERNP, UNSPEC_MMA_PMXVF64GERPN,
UNSPEC_MMA_PMXVF64GERPP, UNSPEC_MMA_PMXVI16GER2,
UNSPEC_MMA_PMXVI16GER2PP, UNSPEC_MMA_PMXVI16GER2S,
UNSPEC_MMA_PMXVI16GER2SPP, UNSPEC_MMA_PMXVI4GER8,
UNSPEC_MMA_PMXVI4GER8PP, UNSPEC_MMA_PMXVI8GER4,
UNSPEC_MMA_PMXVI8GER4PP, UNSPEC_MMA_PMXVI8GER4SPP,
UNSPEC_MMA_XVBF16GER2, UNSPEC_MMA_XVBF16GER2NN,
UNSPEC_MMA_XVBF16GER2NP, UNSPEC_MMA_XVBF16GER2PN,
UNSPEC_MMA_XVBF16GER2PP, UNSPEC_MMA_XVF16GER2, UNSPEC_MMA_XVF16GER2NN,
UNSPEC_MMA_XVF16GER2NP, UNSPEC_MMA_XVF16GER2PN, UNSPEC_MMA_XVF16GER2PP,
UNSPEC_MMA_XVF32GER, UNSPEC_MMA_XVF32GERNN, UNSPEC_MMA_XVF32GERNP,
UNSPEC_MMA_XVF32GERPN, UNSPEC_MMA_XVF32GERPP, UNSPEC_MMA_XVF64GER,
UNSPEC_MMA_XVF64GERNN, UNSPEC_MMA_XVF64GERNP, UNSPEC_MMA_XVF64GERPN,
UNSPEC_MMA_XVF64GERPP, UNSPEC_MMA_XVI16GER2, UNSPEC_MMA_XVI16GER2PP,
UNSPEC_MMA_XVI16GER2S, UNSPEC_MMA_XVI16GER2SPP, UNSPEC_MMA_XVI4GER8,
UNSPEC_MMA_XVI4GER8PP, UNSPEC_MMA_XVI8GER4, UNSPEC_MMA_XVI8GER4PP,
UNSPEC_MMA_XVI8GER4SPP, UNSPEC_MMA_XXMFACC, UNSPEC_MMA_XXMTACC): New.
(MMA_ACC, MMA_VV, MMA_AVV, MMA_PV, MMA_APV, MMA_VVI4I4I8,
MMA_AVVI4I4I8, MMA_VVI4I4I2, MMA_AVVI4I4I2, MMA_VVI4I4,
MMA_AVVI4I4, MMA_PVI4I2, MMA_APVI4I2, MMA_VVI4I4I4,
MMA_AVVI4I4I4): New define_int_iterator.
(acc, vv, avv, pv, apv, vvi4i4i8, avvi4i4i8, vvi4i4i2,
avvi4i4i2, vvi4i4, avvi4i4, pvi4i2, apvi4i2, vvi4i4i4,
avvi4i4i4): New define_int_attr.
(*movpxi): Add zero constant alternative.
(mma_assemble_pair, mma_assemble_acc): New define_expand.
(*mma_assemble_acc): New define_insn_and_split.
(mma_<acc>, mma_xxsetaccz, mma_<vv>, mma_<avv>, mma_<pv>, mma_<apv>,
mma_<vvi4i4i8>, mma_<avvi4i4i8>, mma_<vvi4i4i2>, mma_<avvi4i4i2>,
mma_<vvi4i4>, mma_<avvi4i4>, mma_<pvi4i2>, mma_<apvi4i2>,
mma_<vvi4i4i4>, mma_<avvi4i4i4>): New define_insn.
* config/rs6000/rs6000.md (define_attr "type"): New type mma.
* config/rs6000/vsx.md (UNSPEC_VSX_XVCVBF16SP): New.
(UNSPEC_VSX_XVCVSPBF16): Likewise.
(XVCVBF16): New define_int_iterator.
(xvcvbf16): New define_int_attr.
(vsx_<xvcvbf16>): New define_insn.
* doc/extend.texi: Document the mma built-ins.
2020-06-21 Peter Bergner <bergner@linux.ibm.com>
Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/mma.md: New file.
* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
__MMA__ for mma.
* config/rs6000/rs6000-call.c (rs6000_init_builtins): Add support
for __vector_pair and __vector_quad types.
* config/rs6000/rs6000-cpus.def (OTHER_FUTURE_MASKS): Add
OPTION_MASK_MMA.
(POWERPC_MASKS): Likewise.
* config/rs6000/rs6000-modes.def (OI, XI): New integer modes.
(POI, PXI): New partial integer modes.
* config/rs6000/rs6000.c (TARGET_INVALID_CONVERSION): Define.
(rs6000_hard_regno_nregs_internal): Use VECTOR_ALIGNMENT_P.
(rs6000_hard_regno_mode_ok_uncached): Likewise.
Add support for POImode being allowed in VSX registers and PXImode
being allowed in FP registers.
(rs6000_modes_tieable_p): Adjust comment.
Add support for POImode and PXImode.
(rs6000_debug_reg_global) <print_tieable_modes>: Add OImode, POImode
XImode, PXImode, V2SImode, V2SFmode and CCFPmode..
(rs6000_setup_reg_addr_masks): Use VECTOR_ALIGNMENT_P.
Set up appropriate addr_masks for vector pair and vector quad addresses.
(rs6000_init_hard_regno_mode_ok): Add support for vector pair and
vector quad registers. Setup reload handlers for POImode and PXImode.
(rs6000_builtin_mask_calculate): Add support for RS6000_BTM_MMA.
(rs6000_option_override_internal): Error if -mmma is specified
without -mcpu=future.
(rs6000_slow_unaligned_access): Use VECTOR_ALIGNMENT_P.
(quad_address_p): Change size test to less than 16 bytes.
(reg_offset_addressing_ok_p): Add support for ISA 3.1 vector pair
and vector quad instructions.
(avoiding_indexed_address_p): Likewise.
(rs6000_emit_move): Disallow POImode and PXImode moves involving
constants.
(rs6000_preferred_reload_class): Prefer VSX registers for POImode
and FP registers for PXImode.
(rs6000_split_multireg_move): Support splitting POImode and PXImode
move instructions.
(rs6000_mangle_type): Adjust comment. Add support for mangling
__vector_pair and __vector_quad types.
(rs6000_opt_masks): Add entry for mma.
(rs6000_builtin_mask_names): Add RS6000_BTM_MMA and RS6000_BTM_FUTURE.
(rs6000_function_value): Use VECTOR_ALIGNMENT_P.
(address_to_insn_form): Likewise.
(reg_to_non_prefixed): Likewise.
(rs6000_invalid_conversion): New function.
* config/rs6000/rs6000.h (MASK_MMA): Define.
(BIGGEST_ALIGNMENT): Set to 512 if MMA support is enabled.
(VECTOR_ALIGNMENT_P): New helper macro.
(ALTIVEC_VECTOR_MODE): Use VECTOR_ALIGNMENT_P.
(RS6000_BTM_MMA): Define.
(RS6000_BTM_COMMON): Add RS6000_BTM_MMA and RS6000_BTM_FUTURE.
(rs6000_builtin_type_index): Add RS6000_BTI_vector_pair and
RS6000_BTI_vector_quad.
(vector_pair_type_node): New.
(vector_quad_type_node): New.
* config/rs6000/rs6000.md: Include mma.md.
(define_mode_iterator RELOAD): Add POI and PXI.
* config/rs6000/t-rs6000 (MD_INCLUDES): Add mma.md.
* config/rs6000/rs6000.opt (-mmma): New.
* doc/invoke.texi: Document -mmma.
2020-06-20 Bin Cheng <bin.cheng@linux.alibaba.com>
PR tree-optimization/95638
* tree-loop-distribution.c (pg_edge_callback_data): New field.
(loop_distribution::break_alias_scc_partitions): Record and restore
postorder information. Fix memory leak.
2020-06-19 Tobias Burnus <tobias@codesourcery.com>
* config/gcn/gcn.c (gcn_related_vector_mode): Add ARG_UNUSED.
(output_file_start): Use const 'char *'.
2020-06-19 Przemyslaw Wirkus <Przemyslaw.Wirkus@arm.com>
PR tree-optimization/94880
* match.pd (A | B) - B -> (A & ~B): New simplification.
2020-06-19 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_bb_slp_scalar_cost): Adjust
for lane permutations.
2020-06-19 Richard Biener <rguenther@suse.de>
PR tree-optimization/95761
* tree-vect-slp.c (vect_schedule_slp_instance): Walk all
vectorized stmts for finding the last one.
2020-06-18 Felix Yang <felix.yang@huawei.com>
* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Call
vect_relevant_for_alignment_p to filter out data references in
the loop whose alignment is irrelevant when trying loop peeling
to force alignment.
2020-06-18 Uroš Bizjak <ubizjak@gmail.com>
* config/i386/i386.md (*cmpqi_ext<mode>_1): Use SWI248 mode
iterator instead of SImode for ZERO_EXTRACT RTX. Use SWI248
mode iterator for the first operand of ZERO_EXTRACT RTX.
Change ext_register_operand predicate to register_operand.
Rename from *cmpqi_ext_1.
(*cmpqi_ext<mode>_2): Ditto. Rename from *cmpqi_ext_2.
(*cmpqi_ext<mode>_3): Ditto. Rename from *cmpqi_ext_3.
(*cmpqi_ext<mode>_4): Ditto. Rename from *cmpqi_ext_4.
(cmpi_ext_3): Use HImode instead of SImode for ZERO_EXTRACT RTX.
(*extv<mode>): Use SWI24 mode iterator for the first operand
of ZERO_EXTRACT RTX. Change ext_register_operand predicate
to register_operand.
(*extzv<mode>): Use SWI248 mode iterator for the first operand
of ZERO_EXTRACT RTX. Change ext_register_operand predicate
to register_operand.
(*extzvqi): Use SWI248 mode iterator instead of SImode for
ZERO_EXTRACT RTX. Use SWI248 mode iterator for the first operand
of ZERO_EXTRACT RTX. Change ext_register_operand predicate to
register_operand.
(*extzvqi_mem_rex64 and corresponding peephole2): Use SWI248 mode
iterator instead of SImode for ZERO_EXTRACT RTX. Use SWI248
mode iterator for the first operand of ZERO_EXTRACT RTX.
Change ext_register_operand predicate to register_operand.
(@insv<mode>_1): Use SWI248 mode iterator for the first operand
of ZERO_EXTRACT RTX. Change ext_register_operand predicate to
register_operand.
(*insvqi_1): Use SWI248 mode iterator instead of SImode
for ZERO_EXTRACT RTX. Use SWI248 mode iterator for the
first operand of ZERO_EXTRACT RTX. Change ext_register_operand
predicate to register_operand.
(*insvqi_2): Ditto.
(*insvqi_3): Ditto.
(*insvqi_1_mem_rex64 and corresponding peephole2): Use SWI248 mode
iterator instead of SImode for ZERO_EXTRACT RTX. Use SWI248
mode iterator for the first operand of ZERO_EXTRACT RTX.
Change ext_register_operand predicate to register_operand.
(addqi_ext_1): New expander.
(*addqi_ext<mode>_1): Use SWI248 mode iterator instead of SImode
for ZERO_EXTRACT RTX. Use SWI248 mode iterator for the first
operand of ZERO_EXTRACT RTX. Change ext_register_operand predicate
to register_operand. Rename from *addqi_ext_1.
(*addqi_ext<mode>_2): Ditto. Rename from *addqi_ext_2.
(divmodqi4): Use HImode instead of SImode for ZERO_EXTRACT RTX.
(udivmodqi4): Ditto.
(testqi_ext_1): Use HImode instead of SImode for ZERO_EXTRACT RTX.
(*testqi_ext<mode>_1): Use SWI248 mode iterator instead of SImode
for ZERO_EXTRACT RTX. Use SWI248 mode iterator for the first
operand of ZERO_EXTRACT RTX. Change ext_register_operand predicate
to register_operand. Rename from *testqi_ext_1.
(*testqi_ext<mode>_2): Ditto. Rename from *testqi_ext_2.
(andqi_ext_1): New expander.
(*andqi_ext<mode>_1): Use SWI248 mode iterator instead of SImode
for ZERO_EXTRACT RTX. Use SWI248 mode iterator for the first
operand of ZERO_EXTRACT RTX. Change ext_register_operand predicate
to register_operand. Rename from andqi_ext_1.
(*andqi_ext<mode>_1_cc): Ditto. Rename from *andqi_ext_1_cc.
(*andqi_ext<mode>_2): Ditto. Rename from *andqi_ext_2.
(*<code>qi_ext<mode>_1): Ditto. Rename from *<code>qi_ext_1.
(*<code>qi_ext<mode>_2): Ditto. Rename from *<code>qi_ext_2.
(xorqi_ext_1_cc): Use HImode instead of SImode for ZERO_EXTRACT RTX.
(*xorqi_ext<mode>_1_cc): Use SWI248 mode iterator instead of SImode
for ZERO_EXTRACT RTX. Use SWI248 mode iterator for the first
operand of ZERO_EXTRACT RTX. Change ext_register_operand predicate
to register_operand. Rename from *xorqi_ext_1_cc.
* config/i386/i386-expand.c (ix86_split_idivmod): Emit ZERO_EXTRACT
in mode, matching its first operand.
(promote_duplicated_reg): Update for renamed insv<mode>_1.
* config/i386/predicates.md (ext_register_operand): Remove predicate.
2020-06-18 Martin Sebor <msebor@redhat.com>
PR middle-end/95667
PR middle-end/92814
* builtins.c (compute_objsize): Remove call to
compute_builtin_object_size and instead compute conservative sizes
directly here.
2020-06-18 Martin Liska <mliska@suse.cz>
* coretypes.h (struct iterator_range): New type.
* tree-vect-patterns.c (vect_determine_precisions): Use
range-based iterator.
(vect_pattern_recog): Likewise.
* tree-vect-slp.c (_bb_vec_info): Likewise.
(_bb_vec_info::~_bb_vec_info): Likewise.
(vect_slp_check_for_constructors): Likewise.
* tree-vectorizer.h:Add new iterators
and functions that use it.
2020-06-18 Martin Liska <mliska@suse.cz>
* config/rs6000/rs6000-call.c (fold_build_vec_cmp):
Since 502d63b6d6141597bb18fd23c87736a1b384cf8f, first argument
of a VEC_COND_EXPR cannot be tcc_comparison and so that
a SSA_NAME needs to be created before we use it for the first
argument of the VEC_COND_EXPR.
(fold_compare_helper): Pass gsi to fold_build_vec_cmp.
2020-06-18 Richard Biener <rguenther@suse.de>
PR middle-end/95739
* internal-fn.c (expand_vect_cond_optab_fn): Move the result
to the target if necessary.
(expand_vect_cond_mask_optab_fn): Likewise.
2020-06-18 Martin Liska <mliska@suse.cz>
* tree-ssa-reassoc.c (ovce_extract_ops): Replace *vcond with
vcond as we check for NULL pointer.
2020-06-18 Tobias Burnus <tobias@codesourcery.com>
* gimple-pretty-print.c (dump_binary_rhs): Use braces to
silence empty-body warning with gcc_fallthrough.
2020-06-18 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/95699
* tree-ssa-phiopt.c (minmax_replacement): Treat (signed int)x < 0
as x > INT_MAX and (signed int)x >= 0 as x <= INT_MAX. Move variable
declarations to the statements that set them where possible.
2020-06-18 Jakub Jelinek <jakub@redhat.com>
PR target/95713
* tree-ssa-forwprop.c (simplify_vector_constructor): Don't allow
scalar mode halfvectype other than vector boolean for
VEC_PACK_TRUNC_EXPR.
2020-06-18 Richard Biener <rguenther@suse.de>
* varasm.c (assemble_variable): Make sure to not
defer output when outputting addressed constants.
(output_constant_def_contents): Likewise.
(add_constant_to_table): Take and pass on whether to
defer output.
(output_addressed_constants): Likewise.
(output_constant_def): Pass on whether to defer output
to add_constant_to_table.
(tree_output_constant_def): Defer output of constants.
2020-06-18 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (_slp_tree::two_operators): Remove.
(_slp_tree::lane_permutation): New member.
(_slp_tree::code): Likewise.
(SLP_TREE_TWO_OPERATORS): Remove.
(SLP_TREE_LANE_PERMUTATION): New.
(SLP_TREE_CODE): Likewise.
(vect_stmt_dominates_stmt_p): Declare.
* tree-vectorizer.c (vect_stmt_dominates_stmt_p): New function.
* tree-vect-stmts.c (vect_model_simple_cost): Remove
SLP_TREE_TWO_OPERATORS handling.
* tree-vect-slp.c (_slp_tree::_slp_tree): Amend.
(_slp_tree::~_slp_tree): Likewise.
(vect_two_operations_perm_ok_p): Remove.
(vect_build_slp_tree_1): Remove verification of two-operator
permutation here.
(vect_build_slp_tree_2): When we have two different operators
build two computation SLP nodes and a blend.
(vect_print_slp_tree): Print the lane permutation if it exists.
(slp_copy_subtree): Copy it.
(vect_slp_rearrange_stmts): Re-arrange it.
(vect_slp_analyze_node_operations_1): Handle SLP_TREE_CODE
VEC_PERM_EXPR explicitely.
(vect_schedule_slp_instance): Likewise. Remove old
SLP_TREE_TWO_OPERATORS code.
(vectorizable_slp_permutation): New function.
2020-06-18 Martin Liska <mliska@suse.cz>
* tree-vect-generic.c (expand_vector_condition): Check
for gassign before inspecting RHS.
2020-06-17 Thomas Schwinge <thomas@codesourcery.com>
* gimplify.c (omp_notice_threadprivate_variable)
(omp_default_clause, omp_notice_variable): 'inform' after 'error'
diagnostic. Adjust all users.
2020-06-17 Thomas Schwinge <thomas@codesourcery.com>
* hsa-gen.c (gen_hsa_insns_for_call): Move 'function_decl ==
NULL_TREE' check earlier.
2020-06-17 Forrest Timour <forrest.timour@gmail.com>
* doc/extend.texi (attribute access): Fix a typo.
2020-06-17 Bin Cheng <bin.cheng@linux.alibaba.com>
Kaipeng Zhou <zhoukaipeng3@huawei.com>
PR tree-optimization/95199
* tree-vect-stmts.c: Eliminate common stmts for bump and offset in
strided load/store operations and remove redundant code.
2020-06-17 Richard Sandiford <richard.sandiford@arm.com>
* coretypes.h (first_type): New alias template.
* recog.h (insn_gen_fn::operator()): Use it instead of a decltype.
Remove spurious “...” and split the function type out into a typedef.
2020-06-17 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/s390.c (s390_fix_long_loop_prediction): Exit early
for PARALLELs.
2020-06-17 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_build_slp_tree_1): Set the passed
in *vectype parameter.
(vect_build_slp_tree_2): Set SLP_TREE_VECTYPE from what
vect_build_slp_tree_1 computed.
(vect_analyze_slp_instance): Set SLP_TREE_VECTYPE.
(vect_slp_analyze_node_operations_1): Use the SLP node vector type.
(vect_schedule_slp_instance): Likewise.
* tree-vect-stmts.c (vect_is_simple_use): Take the vector type
from SLP_TREE_VECTYPE.
2020-06-17 Richard Biener <rguenther@suse.de>
PR tree-optimization/95717
* tree-vect-loop-manip.c (slpeel_tree_duplicate_loop_to_edge_cfg):
Move BB SSA updating before exit/latch PHI current def copying.
2020-06-17 Martin Liska <mliska@suse.cz>
* Makefile.in: Add new file.
* expr.c (expand_expr_real_2): Add gcc_unreachable as we should
not meet this condition.
(do_store_flag): Likewise.
* gimplify.c (gimplify_expr): Gimplify first argument of
VEC_COND_EXPR to be a SSA name.
* internal-fn.c (vec_cond_mask_direct): New.
(vec_cond_direct): Likewise.
(vec_condu_direct): Likewise.
(vec_condeq_direct): Likewise.
(expand_vect_cond_optab_fn): New.
(expand_vec_cond_optab_fn): Likewise.
(expand_vec_condu_optab_fn): Likewise.
(expand_vec_condeq_optab_fn): Likewise.
(expand_vect_cond_mask_optab_fn): Likewise.
(expand_vec_cond_mask_optab_fn): Likewise.
(direct_vec_cond_mask_optab_supported_p): Likewise.
(direct_vec_cond_optab_supported_p): Likewise.
(direct_vec_condu_optab_supported_p): Likewise.
(direct_vec_condeq_optab_supported_p): Likewise.
* internal-fn.def (VCOND): New OPTAB.
(VCONDU): Likewise.
(VCONDEQ): Likewise.
(VCOND_MASK): Likewise.
* optabs.c (get_rtx_code): Make it global.
(expand_vec_cond_mask_expr): Removed.
(expand_vec_cond_expr): Removed.
* optabs.h (expand_vec_cond_expr): Likewise.
(vector_compare_rtx): Make it global.
* passes.def: Add new pass_gimple_isel pass.
* tree-cfg.c (verify_gimple_assign_ternary): Add check
for VEC_COND_EXPR about first argument.
* tree-pass.h (make_pass_gimple_isel): New.
* tree-ssa-forwprop.c (pass_forwprop::execute): Prevent
propagation of the first argument of a VEC_COND_EXPR.
* tree-ssa-reassoc.c (ovce_extract_ops): Support SSA_NAME as
first argument of a VEC_COND_EXPR.
(optimize_vec_cond_expr): Likewise.
* tree-vect-generic.c (expand_vector_divmod): Make SSA_NAME
for a first argument of created VEC_COND_EXPR.
(expand_vector_condition): Fix coding style.
* tree-vect-stmts.c (vectorizable_condition): Gimplify
first argument.
* gimple-isel.cc: New file.
2020-06-17 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn-hsa.h (TEXT_SECTION_ASM_OP): Use ".text".
(BSS_SECTION_ASM_OP): Use ".bss".
(ASM_SPEC): Remove "-mattr=-code-object-v3".
(LINK_SPEC): Add "--export-dynamic".
* config/gcn/gcn-opts.h (processor_type): Replace PROCESSOR_VEGA with
PROCESSOR_VEGA10 and PROCESSOR_VEGA20.
* config/gcn/gcn-run.c (HSA_RUNTIME_LIB): Use ".so.1" variant.
(load_image): Remove obsolete relocation handling.
Add ".kd" suffix to the symbol names.
* config/gcn/gcn.c (MAX_NORMAL_SGPR_COUNT): Set to 62.
(gcn_option_override): Update gcn_isa test.
(gcn_kernel_arg_types): Update all the assembler directives.
Remove the obsolete options.
(gcn_conditional_register_usage): Update MAX_NORMAL_SGPR_COUNT usage.
(gcn_omp_device_kind_arch_isa): Handle PROCESSOR_VEGA10 and
PROCESSOR_VEGA20.
(output_file_start): Rework assembler file header.
(gcn_hsa_declare_function_name): Rework kernel metadata.
* config/gcn/gcn.h (GCN_KERNEL_ARG_TYPES): Set to 16.
* config/gcn/gcn.opt (PROCESSOR_VEGA): Remove enum.
(PROCESSOR_VEGA10): New enum value.
(PROCESSOR_VEGA20): New enum value.
2020-06-17 Martin Liska <mliska@suse.cz>
* gcov-dump.c (print_version): Collapse lisence header to 2 lines
in --version.
* gcov-tool.c (print_version): Likewise.
* gcov.c (print_version): Likewise.
2020-06-17 liuhongt <hongtao.liu@intel.com>
PR target/95524
* config/i386/i386-expand.c
(ix86_expand_vec_shift_qihi_constant): New function.
* config/i386/i386-protos.h
(ix86_expand_vec_shift_qihi_constant): Declare.
* config/i386/sse.md (<shift_insn><mode>3): Optimize shift
V*QImode by constant.
2020-06-16 Aldy Hernandez <aldyh@redhat.com>
PR tree-optimization/95649
* tree-ssa-propagate.c (propagate_into_phi_args): Do not propagate unless
value is a constant.
2020-06-16 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
* config.in: Regenerate.
* config/s390/s390.c (print_operand): Emit vector alignment hints
for target z13, if AS accepts them. For other targets the logic
stays the same.
* config/s390/s390.h (TARGET_VECTOR_LOADSTORE_ALIGNMENT_HINTS): Define
macro.
* configure: Regenerate.
* configure.ac: Check HAVE_AS_VECTOR_LOADSTORE_ALIGNMENT_HINTS_ON_Z13.
2020-06-16 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/arm/arm_mve.h (__arm_vaddq_m_n_s8): Correct the intrinsic
arguments.
(__arm_vaddq_m_n_s32): Likewise.
(__arm_vaddq_m_n_s16): Likewise.
(__arm_vaddq_m_n_u8): Likewise.
(__arm_vaddq_m_n_u32): Likewise.
(__arm_vaddq_m_n_u16): Likewise.
(__arm_vaddq_m): Modify polymorphic variant.
2020-06-16 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/arm/mve.md (mve_uqrshll_sat<supf>_di): Correct the predicate
and constraint of all the operands.
(mve_sqrshrl_sat<supf>_di): Likewise.
(mve_uqrshl_si): Likewise.
(mve_sqrshr_si): Likewise.
(mve_uqshll_di): Likewise.
(mve_urshrl_di): Likewise.
(mve_uqshl_si): Likewise.
(mve_urshr_si): Likewise.
(mve_sqshl_si): Likewise.
(mve_srshr_si): Likewise.
(mve_srshrl_di): Likewise.
(mve_sqshll_di): Likewise.
* config/arm/predicates.md (arm_low_register_operand): Define.
2020-06-16 Jakub Jelinek <jakub@redhat.com>
* tree.h (OMP_FOR_NON_RECTANGULAR): Define.
* gimplify.c (gimplify_omp_for): Diagnose schedule, ordered
or dist_schedule clause on non-rectangular loops. Handle
gimplification of non-rectangular lb/b expressions. When changing
iteration variable, adjust also non-rectangular lb/b expressions
referencing that.
* omp-general.h (struct omp_for_data_loop): Add m1, m2 and outer
members.
(struct omp_for_data): Add non_rect member.
* omp-general.c (omp_extract_for_data): Handle non-rectangular
loops. Fill in non_rect, m1, m2 and outer.
* omp-low.c (lower_omp_for): Handle non-rectangular lb/b expressions.
* omp-expand.c (expand_omp_for): Emit sorry_at for unsupported
non-rectangular loop cases and assert for cases that can't be
non-rectangular.
* tree-pretty-print.c (dump_mem_ref): Formatting fix.
(dump_omp_loop_non_rect_expr): New function.
(dump_generic_node): Handle non-rectangular OpenMP loops.
* tree-pretty-print.h (dump_omp_loop_non_rect_expr): Declare.
* gimple-pretty-print.c (dump_gimple_omp_for): Handle non-rectangular
OpenMP loops.
2020-06-16 Richard Biener <rguenther@suse.de>
PR middle-end/95690
* varasm.c (build_constant_desc): Remove set_mem_attributes call.
2020-06-16 Kito Cheng <kito.cheng@sifive.com>
PR target/95683
* config/riscv/riscv.c (riscv_gpr_save_operation_p): Remove
assertion and turn it into a early exit check.
2020-06-15 Eric Botcazou <ebotcazou@adacore.com>
* gimplify.c (gimplify_init_constructor) <AGGREGATE_TYPE>: Declare
new ENSURE_SINGLE_ACCESS constant and move variables down. If it is
true and all elements are zero, then always clear. Return GS_ERROR
if a temporary would be created for it and NOTIFY_TEMP_CREATION set.
(gimplify_modify_expr_rhs) <VAR_DECL>: If the target is volatile but
the type is aggregate non-addressable, ask gimplify_init_constructor
whether it can generate a single access to the target.
2020-06-15 Eric Botcazou <ebotcazou@adacore.com>
* tree-sra.c (propagate_subaccesses_from_rhs): When a non-scalar
access on the LHS is replaced with a scalar access, propagate the
TYPE_REVERSE_STORAGE_ORDER flag of the type of the original access.
2020-06-15 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/xtensa.c (TARGET_HAVE_TLS): Remove
TARGET_THREADPTR reference.
(xtensa_tls_symbol_p, xtensa_tls_referenced_p): Use
targetm.have_tls instead of TARGET_HAVE_TLS.
(xtensa_option_override): Set targetm.have_tls to false in
configurations without THREADPTR.
2020-06-15 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/elf.h (ASM_SPEC, LINK_SPEC): Pass ABI switch to
assembler/linker.
* config/xtensa/linux.h (ASM_SPEC, LINK_SPEC): Ditto.
* config/xtensa/uclinux.h (ASM_SPEC, LINK_SPEC): Ditto.
* config/xtensa/xtensa.c (xtensa_option_override): Initialize
xtensa_windowed_abi if needed.
* config/xtensa/xtensa.h (TARGET_WINDOWED_ABI_DEFAULT): New
macro.
(TARGET_WINDOWED_ABI): Redefine to xtensa_windowed_abi.
* config/xtensa/xtensa.opt (xtensa_windowed_abi): New target
option variable.
(mabi=call0, mabi=windowed): New options.
* doc/invoke.texi: Document new -mabi= Xtensa-specific options.
2020-06-15 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/xtensa.c (xtensa_can_eliminate): New function.
(TARGET_CAN_ELIMINATE): New macro.
* config/xtensa/xtensa.h
(XTENSA_WINDOWED_HARD_FRAME_POINTER_REGNUM)
(XTENSA_CALL0_HARD_FRAME_POINTER_REGNUM): New macros.
(HARD_FRAME_POINTER_REGNUM): Define using
XTENSA_*_HARD_FRAME_POINTER_REGNUM.
(ELIMINABLE_REGS): Replace lines with HARD_FRAME_POINTER_REGNUM
by lines with XTENSA_WINDOWED_HARD_FRAME_POINTER_REGNUM and
XTENSA_CALL0_HARD_FRAME_POINTER_REGNUM.
2020-06-15 Felix Yang <felix.yang@huawei.com>
* tree-vect-data-refs.c (vect_verify_datarefs_alignment): Rename
parameter to loop_vinfo and update uses. Use LOOP_VINFO_DATAREFS
when possible.
(vect_analyze_data_refs_alignment): Likewise, and use LOOP_VINFO_DDRS
when possible.
* tree-vect-loop.c (vect_dissolve_slp_only_groups): Use
LOOP_VINFO_DATAREFS when possible.
(update_epilogue_loop_vinfo): Likewise.
2020-06-15 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/riscv.c (riscv_gen_gpr_save_insn): Change type to
unsigned for i.
(riscv_gpr_save_operation_p): Change type to unsigned for i and
len.
2020-06-15 Hongtao Liu <hongtao.liu@intel.com>
PR target/95488
* config/i386/i386-expand.c (ix86_expand_vecmul_qihi): New
function.
* config/i386/i386-protos.h (ix86_expand_vecmul_qihi): Declare.
* config/i386/sse.md (mul<mode>3): Drop mask_name since
there's no real simd int8 multiplication instruction with
mask. Also optimize it under TARGET_AVX512BW.
(mulv8qi3): New expander.
2020-06-12 Marco Elver <elver@google.com>
* gimplify.c (gimplify_function_tree): Optimize and do not emit
IFN_TSAN_FUNC_EXIT in a finally block if we do not need it.
* params.opt: Add --param=tsan-instrument-func-entry-exit=.
* tsan.c (instrument_memory_accesses): Make
fentry_exit_instrument bool depend on new param.
2020-06-12 Felix Yang <felix.yang@huawei.com>
PR tree-optimization/95570
* tree-vect-data-refs.c (vect_relevant_for_alignment_p): New function.
(vect_verify_datarefs_alignment): Call it to filter out data references
in the loop whose alignment is irrelevant.
(vect_get_peeling_costs_all_drs): Likewise.
(vect_peeling_supportable): Likewise.
(vect_enhance_data_refs_alignment): Likewise.
2020-06-12 Richard Biener <rguenther@suse.de>
PR tree-optimization/95633
* tree-vect-stmts.c (vectorizable_condition): Properly
guard the vec_else_clause access with EXTRACT_LAST_REDUCTION.
2020-06-12 Martin Liška <mliska@suse.cz>
* cgraphunit.c (process_symver_attribute): Wrap weakref keyword.
* dbgcnt.c (dbg_cnt_set_limit_by_index): Do not print extra new
line.
* lto-wrapper.c (merge_and_complain): Wrap option names.
2020-06-12 Kewen Lin <linkw@gcc.gnu.org>
* tree-vect-loop-manip.c (vect_set_loop_controls_directly): Rename
LOOP_VINFO_MASK_COMPARE_TYPE to LOOP_VINFO_RGROUP_COMPARE_TYPE. Rename
LOOP_VINFO_MASK_IV_TYPE to LOOP_VINFO_RGROUP_IV_TYPE.
(vect_set_loop_condition_masked): Renamed to ...
(vect_set_loop_condition_partial_vectors): ... this. Rename
LOOP_VINFO_MASK_COMPARE_TYPE to LOOP_VINFO_RGROUP_COMPARE_TYPE. Rename
vect_iv_limit_for_full_masking to vect_iv_limit_for_partial_vectors.
(vect_set_loop_condition_unmasked): Renamed to ...
(vect_set_loop_condition_normal): ... this.
(vect_set_loop_condition): Rename vect_set_loop_condition_unmasked to
vect_set_loop_condition_normal. Rename vect_set_loop_condition_masked
to vect_set_loop_condition_partial_vectors.
(vect_prepare_for_masked_peels): Rename LOOP_VINFO_MASK_COMPARE_TYPE
to LOOP_VINFO_RGROUP_COMPARE_TYPE.
* tree-vect-loop.c (vect_known_niters_smaller_than_vf): New, factored
out from ...
(vect_analyze_loop_costing): ... this.
(_loop_vec_info::_loop_vec_info): Rename mask_compare_type to
compare_type.
(vect_min_prec_for_max_niters): New, factored out from ...
(vect_verify_full_masking): ... this. Rename
vect_iv_limit_for_full_masking to vect_iv_limit_for_partial_vectors.
Rename LOOP_VINFO_MASK_COMPARE_TYPE to LOOP_VINFO_RGROUP_COMPARE_TYPE.
Rename LOOP_VINFO_MASK_IV_TYPE to LOOP_VINFO_RGROUP_IV_TYPE.
(vectorizable_reduction): Update some dumpings with partial
vectors instead of fully-masked.
(vectorizable_live_operation): Likewise.
(vect_iv_limit_for_full_masking): Renamed to ...
(vect_iv_limit_for_partial_vectors): ... this.
* tree-vect-stmts.c (check_load_store_masking): Renamed to ...
(check_load_store_for_partial_vectors): ... this. Update some
dumpings with partial vectors instead of fully-masked.
(vectorizable_store): Rename check_load_store_masking to
check_load_store_for_partial_vectors.
(vectorizable_load): Likewise.
* tree-vectorizer.h (LOOP_VINFO_MASK_COMPARE_TYPE): Renamed to ...
(LOOP_VINFO_RGROUP_COMPARE_TYPE): ... this.
(LOOP_VINFO_MASK_IV_TYPE): Renamed to ...
(LOOP_VINFO_RGROUP_IV_TYPE): ... this.
(vect_iv_limit_for_full_masking): Renamed to ...
(vect_iv_limit_for_partial_vectors): this.
(_loop_vec_info): Rename mask_compare_type to rgroup_compare_type.
Rename iv_type to rgroup_iv_type.
2020-06-12 Richard Sandiford <richard.sandiford@arm.com>
* recog.h (insn_gen_fn::f0, insn_gen_fn::f1, insn_gen_fn::f2)
(insn_gen_fn::f3, insn_gen_fn::f4, insn_gen_fn::f5, insn_gen_fn::f6)
(insn_gen_fn::f7, insn_gen_fn::f8, insn_gen_fn::f9, insn_gen_fn::f10)
(insn_gen_fn::f11, insn_gen_fn::f12, insn_gen_fn::f13)
(insn_gen_fn::f14, insn_gen_fn::f15, insn_gen_fn::f16): Delete.
(insn_gen_fn::operator()): Replace overloaded definitions with
a parameter-pack version.
2020-06-12 H.J. Lu <hjl.tools@gmail.com>
PR target/93492
* config/i386/i386-features.c (rest_of_insert_endbranch):
Renamed to ...
(rest_of_insert_endbr_and_patchable_area): Change return type
to void. Add need_endbr and patchable_area_size arguments.
Don't call timevar_push nor timevar_pop. Replace
endbr_queued_at_entrance with insn_queued_at_entrance. Insert
UNSPECV_PATCHABLE_AREA for patchable area.
(pass_data_insert_endbranch): Renamed to ...
(pass_data_insert_endbr_and_patchable_area): This. Change
pass name to endbr_and_patchable_area.
(pass_insert_endbranch): Renamed to ...
(pass_insert_endbr_and_patchable_area): This. Add need_endbr
and patchable_area_size;.
(pass_insert_endbr_and_patchable_area::gate): Set and check
need_endbr and patchable_area_size.
(pass_insert_endbr_and_patchable_area::execute): Call
timevar_push and timevar_pop. Pass need_endbr and
patchable_area_size to rest_of_insert_endbr_and_patchable_area.
(make_pass_insert_endbranch): Renamed to ...
(make_pass_insert_endbr_and_patchable_area): This.
* config/i386/i386-passes.def: Replace pass_insert_endbranch
with pass_insert_endbr_and_patchable_area.
* config/i386/i386-protos.h (ix86_output_patchable_area): New.
(make_pass_insert_endbranch): Renamed to ...
(make_pass_insert_endbr_and_patchable_area): This.
* config/i386/i386.c (ix86_asm_output_function_label): Set
function_label_emitted to true.
(ix86_print_patchable_function_entry): New function.
(ix86_output_patchable_area): Likewise.
(x86_function_profiler): Replace endbr_queued_at_entrance with
insn_queued_at_entrance. Generate ENDBR only for TYPE_ENDBR.
Call ix86_output_patchable_area to generate patchable area if
needed.
(TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY): New.
* config/i386/i386.h (queued_insn_type): New.
(machine_function): Add function_label_emitted. Replace
endbr_queued_at_entrance with insn_queued_at_entrance.
* config/i386/i386.md (UNSPECV_PATCHABLE_AREA): New.
(patchable_area): New.
2020-06-11 Martin Liska <mliska@suse.cz>
* config/rs6000/rs6000.c (rs6000_density_test): Fix GNU coding
style.
2020-06-11 Martin Liska <mliska@suse.cz>
PR target/95627
* config/rs6000/rs6000.c (rs6000_density_test): Skip debug
statements.
2020-06-11 Martin Liska <mliska@suse.cz>
Jakub Jelinek <jakub@redhat.com>
PR sanitizer/95634
* asan.c (asan_emit_stack_protection): Fix emission for ilp32
by using Pmode instead of ptr_mode.
2020-06-11 Kewen Lin <linkw@gcc.gnu.org>
* tree-vect-loop-manip.c (vect_set_loop_mask): Renamed to ...
(vect_set_loop_control): ... this.
(vect_maybe_permute_loop_masks): Rename rgroup_masks related things.
(vect_set_loop_masks_directly): Renamed to ...
(vect_set_loop_controls_directly): ... this. Also rename some
variables with ctrl instead of mask. Rename vect_set_loop_mask to
vect_set_loop_control.
(vect_set_loop_condition_masked): Rename rgroup_masks related things.
Also rename some variables with ctrl instead of mask.
* tree-vect-loop.c (release_vec_loop_masks): Renamed to ...
(release_vec_loop_controls): ... this. Rename rgroup_masks related
things.
(_loop_vec_info::~_loop_vec_info): Rename release_vec_loop_masks to
release_vec_loop_controls.
(can_produce_all_loop_masks_p): Rename rgroup_masks related things.
(vect_get_max_nscalars_per_iter): Likewise.
(vect_estimate_min_profitable_iters): Likewise.
(vect_record_loop_mask): Likewise.
(vect_get_loop_mask): Likewise.
* tree-vectorizer.h (struct rgroup_masks): Renamed to ...
(struct rgroup_controls): ... this. Also rename mask_type
to type and rename masks to controls.
2020-06-11 Kewen Lin <linkw@gcc.gnu.org>
* tree-vect-loop-manip.c (vect_set_loop_condition): Rename
LOOP_VINFO_FULLY_MASKED_P to LOOP_VINFO_USING_PARTIAL_VECTORS_P.
(vect_gen_vector_loop_niters): Likewise.
(vect_do_peeling): Likewise.
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Rename
fully_masked_p to using_partial_vectors_p.
(vect_analyze_loop_costing): Rename LOOP_VINFO_FULLY_MASKED_P to
LOOP_VINFO_USING_PARTIAL_VECTORS_P.
(determine_peel_for_niter): Likewise.
(vect_estimate_min_profitable_iters): Likewise.
(vect_transform_loop): Likewise.
* tree-vectorizer.h (LOOP_VINFO_FULLY_MASKED_P): Updated.
(LOOP_VINFO_USING_PARTIAL_VECTORS_P): New macro.
2020-06-11 Kewen Lin <linkw@gcc.gnu.org>
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Rename
can_fully_mask_p to can_use_partial_vectors_p.
(vect_analyze_loop_2): Rename LOOP_VINFO_CAN_FULLY_MASK_P to
LOOP_VINFO_CAN_USE_PARTIAL_VECTORS_P. Rename saved_can_fully_mask_p
to saved_can_use_partial_vectors_p.
(vectorizable_reduction): Rename LOOP_VINFO_CAN_FULLY_MASK_P to
LOOP_VINFO_CAN_USE_PARTIAL_VECTORS_P.
(vectorizable_live_operation): Likewise.
* tree-vect-stmts.c (permute_vec_elements): Likewise.
(check_load_store_masking): Likewise.
(vectorizable_operation): Likewise.
(vectorizable_store): Likewise.
(vectorizable_load): Likewise.
(vectorizable_condition): Likewise.
* tree-vectorizer.h (LOOP_VINFO_CAN_FULLY_MASK_P): Renamed to ...
(LOOP_VINFO_CAN_USE_PARTIAL_VECTORS_P): ... this.
(_loop_vec_info): Rename can_fully_mask_p to can_use_partial_vectors_p.
2020-06-11 Martin Liska <mliska@suse.cz>
* optc-save-gen.awk: Quote error string.
2020-06-11 Alexandre Oliva <oliva@adacore.com>
* print-rtl.c (print_mem_expr): Enable TDF_SLIM in dump_flags.
2020-06-11 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/riscv-protos.h (riscv_output_gpr_save): Remove.
* config/riscv/riscv-sr.c (riscv_sr_match_prologue): Update
value.
* config/riscv/riscv.c (riscv_output_gpr_save): Remove.
* config/riscv/riscv.md (gpr_save): Update output asm pattern.
2020-06-11 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/predicates.md (gpr_save_operation): New.
* config/riscv/riscv-protos.h (riscv_gen_gpr_save_insn): New.
(riscv_gpr_save_operation_p): Ditto.
* config/riscv/riscv-sr.c (riscv_remove_unneeded_save_restore_calls):
Ignore USEs for gpr_save patter.
* config/riscv/riscv.c (gpr_save_reg_order): New.
(riscv_expand_prologue): Use riscv_gen_gpr_save_insn to gen gpr_save.
(riscv_gen_gpr_save_insn): New.
(riscv_gpr_save_operation_p): Ditto.
* config/riscv/riscv.md (S3_REGNUM): New.
(S4_REGNUM): Ditto.
(S5_REGNUM): Ditto.
(S6_REGNUM): Ditto.
(S7_REGNUM): Ditto.
(S8_REGNUM): Ditto.
(S9_REGNUM): Ditto.
(S10_REGNUM): Ditto.
(S11_REGNUM): Ditto.
(gpr_save): Model USEs correctly.
2020-06-10 Martin Sebor <msebor@redhat.com>
PR middle-end/95353
PR middle-end/92939
* builtins.c (inform_access): New function.
(check_access): Call it. Add argument.
(addr_decl_size): Remove.
(get_range): New function.
(compute_objsize): New overload. Only use compute_builtin_object_size
with raw memory function.
(check_memop_access): Pass new argument to compute_objsize and
check_access.
(expand_builtin_memchr, expand_builtin_strcat): Same.
(expand_builtin_strcpy, expand_builtin_stpcpy_1): Same.
(expand_builtin_stpncpy, check_strncat_sizes): Same.
(expand_builtin_strncat, expand_builtin_strncpy): Same.
(expand_builtin_memcmp): Same.
* builtins.h (check_nul_terminated_array): Declare extern.
(check_access): Add argument.
(struct access_ref, struct access_data): New structs.
* gimple-ssa-warn-restrict.c (clamp_offset): New helper.
(builtin_access::overlap): Call it.
* tree-object-size.c (decl_init_size): Declare extern.
(addr_object_size): Correct offset computation.
* tree-object-size.h (decl_init_size): Declare.
* tree-ssa-strlen.c (handle_integral_assign): Remove a call
to maybe_warn_overflow when assigning to an SSA_NAME.
2020-06-10 Richard Biener <rguenther@suse.de>
* tree-vect-loop.c (vect_determine_vectorization_factor):
Skip debug stmts.
(_loop_vec_info::_loop_vec_info): Likewise.
(vect_update_vf_for_slp): Likewise.
(vect_analyze_loop_operations): Likewise.
(update_epilogue_loop_vinfo): Likewise.
* tree-vect-patterns.c (vect_determine_precisions): Likewise.
(vect_pattern_recog): Likewise.
* tree-vect-slp.c (vect_detect_hybrid_slp): Likewise.
(_bb_vec_info::_bb_vec_info): Likewise.
* tree-vect-stmts.c (vect_mark_stmts_to_be_vectorized):
Likewise.
2020-06-10 Richard Biener <rguenther@suse.de>
PR tree-optimization/95576
* tree-vect-slp.c (vect_slp_bb): Skip leading debug stmts.
2020-06-10 Haijian Zhang <z.zhanghaijian@huawei.com>
PR target/95523
* config/aarch64/aarch64-sve-builtins.h
(sve_switcher::m_old_maximum_field_alignment): New member.
* config/aarch64/aarch64-sve-builtins.cc
(sve_switcher::sve_switcher): Save maximum_field_alignment in
m_old_maximum_field_alignment and clear maximum_field_alignment.
(sve_switcher::~sve_switcher): Restore maximum_field_alignment.
2020-06-10 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (_slp_tree::vec_stmts): Make it a vector
of gimple * stmts.
(_stmt_vec_info::vec_stmts): Likewise.
(vec_info::stmt_vec_info_ro): New flag.
(vect_finish_replace_stmt): Adjust declaration.
(vect_finish_stmt_generation): Likewise.
(vectorizable_induction): Likewise.
(vect_transform_reduction): Likewise.
(vectorizable_lc_phi): Likewise.
* tree-vect-data-refs.c (vect_create_data_ref_ptr): Do not
allocate stmt infos for increments.
(vect_record_grouped_load_vectors): Adjust.
* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise.
(vectorize_fold_left_reduction): Likewise.
(vect_transform_reduction): Likewise.
(vect_transform_cycle_phi): Likewise.
(vectorizable_lc_phi): Likewise.
(vectorizable_induction): Likewise.
(vectorizable_live_operation): Likewise.
(vect_transform_loop): Likewise.
* tree-vect-patterns.c (vect_pattern_recog): Set stmt_vec_info_ro.
* tree-vect-slp.c (vect_get_slp_vect_def): Adjust.
(vect_get_slp_defs): Likewise.
(vect_transform_slp_perm_load): Likewise.
(vect_schedule_slp_instance): Likewise.
(vectorize_slp_instance_root_stmt): Likewise.
* tree-vect-stmts.c (vect_get_vec_defs_for_operand): Likewise.
(vect_finish_stmt_generation_1): Do not allocate a stmt info.
(vect_finish_replace_stmt): Do not return anything.
(vect_finish_stmt_generation): Likewise.
(vect_build_gather_load_calls): Adjust.
(vectorizable_bswap): Likewise.
(vectorizable_call): Likewise.
(vectorizable_simd_clone_call): Likewise.
(vect_create_vectorized_demotion_stmts): Likewise.
(vectorizable_conversion): Likewise.
(vectorizable_assignment): Likewise.
(vectorizable_shift): Likewise.
(vectorizable_operation): Likewise.
(vectorizable_scan_store): Likewise.
(vectorizable_store): Likewise.
(vectorizable_load): Likewise.
(vectorizable_condition): Likewise.
(vectorizable_comparison): Likewise.
(vect_transform_stmt): Likewise.
* tree-vectorizer.c (vec_info::vec_info): Initialize
stmt_vec_info_ro.
(vec_info::replace_stmt): Copy over stmt UID rather than
unsetting/setting a stmt info allocating a new UID.
(vec_info::set_vinfo_for_stmt): Assert !stmt_vec_info_ro.
2020-06-10 Aldy Hernandez <aldyh@redhat.com>
* gimple-loop-versioning.cc (loop_versioning::name_prop::get_value):
Add stmt parameter.
* gimple-ssa-evrp.c (class evrp_folder): New.
(class evrp_dom_walker): Remove.
(execute_early_vrp): Use evrp_folder instead of evrp_dom_walker.
* tree-ssa-ccp.c (ccp_folder::get_value): Add stmt parameter.
* tree-ssa-copy.c (copy_folder::get_value): Same.
* tree-ssa-propagate.c (substitute_and_fold_engine::replace_uses_in):
Pass stmt to get_value.
(substitute_and_fold_engine::replace_phi_args_in): Same.
(substitute_and_fold_dom_walker::after_dom_children): Call
post_fold_bb.
(substitute_and_fold_dom_walker::foreach_new_stmt_in_bb): New.
(substitute_and_fold_dom_walker::propagate_into_phi_args): New.
(substitute_and_fold_dom_walker::before_dom_children): Adjust to
call virtual functions for folding, pre_folding, and post folding.
Call get_value with PHI. Tweak dump.
* tree-ssa-propagate.h (class substitute_and_fold_engine):
New argument to get_value.
New virtual function pre_fold_bb.
New virtual function post_fold_bb.
New virtual function pre_fold_stmt.
New virtual function post_new_stmt.
New function propagate_into_phi_args.
* tree-vrp.c (vrp_folder::get_value): Add stmt argument.
* vr-values.c (vr_values::extract_range_from_stmt): Adjust dump
output.
(vr_values::fold_cond): New.
(vr_values::simplify_cond_using_ranges_1): Call fold_cond.
* vr-values.h (class vr_values): Add
simplify_cond_using_ranges_when_edge_is_known.
2020-06-10 Martin Liska <mliska@suse.cz>
PR sanitizer/94910
* asan.c (asan_emit_stack_protection): Emit
also **SavedFlagPtr(FakeStack, class_id) = 0 in order to release
a stack frame.
2020-06-10 Tamar Christina <tamar.christina@arm.com>
* config/aarch64/aarch64.c (aarch64_rtx_mult_cost): Adjust costs for mul.
2020-06-10 Richard Biener <rguenther@suse.de>
* tree-vect-data-refs.c (vect_vfa_access_size): Adjust.
(vect_record_grouped_load_vectors): Likewise.
* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise.
(vectorize_fold_left_reduction): Likewise.
(vect_transform_reduction): Likewise.
(vect_transform_cycle_phi): Likewise.
(vectorizable_lc_phi): Likewise.
(vectorizable_induction): Likewise.
(vectorizable_live_operation): Likewise.
(vect_transform_loop): Likewise.
* tree-vect-slp.c (vect_get_slp_defs): New function, split out
from overload.
* tree-vect-stmts.c (vect_get_vec_def_for_operand_1): Remove.
(vect_get_vec_def_for_operand): Likewise.
(vect_get_vec_def_for_stmt_copy): Likewise.
(vect_get_vec_defs_for_stmt_copy): Likewise.
(vect_get_vec_defs_for_operand): New function.
(vect_get_vec_defs): Likewise.
(vect_build_gather_load_calls): Adjust.
(vect_get_gather_scatter_ops): Likewise.
(vectorizable_bswap): Likewise.
(vectorizable_call): Likewise.
(vectorizable_simd_clone_call): Likewise.
(vect_get_loop_based_defs): Remove.
(vect_create_vectorized_demotion_stmts): Adjust.
(vectorizable_conversion): Likewise.
(vectorizable_assignment): Likewise.
(vectorizable_shift): Likewise.
(vectorizable_operation): Likewise.
(vectorizable_scan_store): Likewise.
(vectorizable_store): Likewise.
(vectorizable_load): Likewise.
(vectorizable_condition): Likewise.
(vectorizable_comparison): Likewise.
(vect_transform_stmt): Adjust and remove no longer applicable
sanity checks.
* tree-vectorizer.c (vec_info::new_stmt_vec_info): Initialize
STMT_VINFO_VEC_STMTS.
(vec_info::free_stmt_vec_info): Relase it.
* tree-vectorizer.h (_stmt_vec_info::vectorized_stmt): Remove.
(_stmt_vec_info::vec_stmts): Add.
(STMT_VINFO_VEC_STMT): Remove.
(STMT_VINFO_VEC_STMTS): New.
(vect_get_vec_def_for_operand_1): Remove.
(vect_get_vec_def_for_operand): Likewise.
(vect_get_vec_defs_for_stmt_copy): Likewise.
(vect_get_vec_def_for_stmt_copy): Likewise.
(vect_get_vec_defs): New overloads.
(vect_get_vec_defs_for_operand): New.
(vect_get_slp_defs): Declare.
2020-06-10 Qian Chao <qianchao9@huawei.com>
PR tree-optimization/95569
* trans-mem.c (expand_assign_tm): Ensure that rtmp is marked TREE_ADDRESSABLE.
2020-06-10 Martin Liska <mliska@suse.cz>
PR tree-optimization/92860
* optc-save-gen.awk: Generate new function cl_optimization_compare.
* opth-gen.awk: Generate declaration of the function.
2020-06-09 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/ppc-auxv.h (PPC_PLATFORM_FUTURE): Allocate
'future' PowerPC platform.
(PPC_FEATURE2_ARCH_3_1): New HWCAP2 bit for ISA 3.1.
(PPC_FEATURE2_MMA): New HWCAP2 bit for MMA.
* config/rs6000/rs6000-call.c (cpu_supports_info): Add ISA 3.1 and
MMA HWCAP2 bits.
* config/rs6000/rs6000.c (CLONE_ISA_3_1): New clone support.
(rs6000_clone_map): Add 'future' system target_clones support.
2020-06-09 Michael Kuhn <gcc@ikkoku.de>
* Makefile.in (ZSTD_INC): Define.
(ZSTD_LIB): Include ZSTD_LDFLAGS.
(CFLAGS-lto-compress.o): Add ZSTD_INC.
* configure.ac (ZSTD_CPPFLAGS, ZSTD_LDFLAGS): New variables for
AC_SUBST.
* configure: Rebuilt.
2020-06-09 Jason Merrill <jason@redhat.com>
PR c++/95552
* tree.c (walk_tree_1): Call func on the TYPE_DECL of a DECL_EXPR.
2020-06-09 Marco Elver <elver@google.com>
* params.opt: Define --param=tsan-distinguish-volatile=[0,1].
* sanitizer.def (BUILT_IN_TSAN_VOLATILE_READ1): Define new
builtin for volatile instrumentation of reads/writes.
(BUILT_IN_TSAN_VOLATILE_READ2): Likewise.
(BUILT_IN_TSAN_VOLATILE_READ4): Likewise.
(BUILT_IN_TSAN_VOLATILE_READ8): Likewise.
(BUILT_IN_TSAN_VOLATILE_READ16): Likewise.
(BUILT_IN_TSAN_VOLATILE_WRITE1): Likewise.
(BUILT_IN_TSAN_VOLATILE_WRITE2): Likewise.
(BUILT_IN_TSAN_VOLATILE_WRITE4): Likewise.
(BUILT_IN_TSAN_VOLATILE_WRITE8): Likewise.
(BUILT_IN_TSAN_VOLATILE_WRITE16): Likewise.
* tsan.c (get_memory_access_decl): Argument if access is
volatile. If param tsan-distinguish-volatile is non-zero, and
access if volatile, return volatile instrumentation decl.
(instrument_expr): Check if access is volatile.
2020-06-09 Richard Biener <rguenther@suse.de>
* tree-vect-loop.c (vectorizable_induction): Remove dead code.
2020-06-09 Tobias Burnus <tobias@codesourcery.com>
* omp-offload.c (add_decls_addresses_to_decl_constructor,
omp_finish_file): With in_lto_p, stream out all offload-table
items even if the symtab_node does not exist.
2020-06-09 Richard Biener <rguenther@suse.de>
* tree-vect-stmts.c (vect_transform_stmt): Remove dead code.
2020-06-09 Martin Liska <mliska@suse.cz>
* gcov-dump.c (print_usage): Fix spacing for --raw option
in --help.
2020-06-09 Martin Liska <mliska@suse.cz>
* cif-code.def (ATTRIBUTE_MISMATCH): Rename to...
(SANITIZE_ATTRIBUTE_MISMATCH): ...this.
* ipa-inline.c (sanitize_attrs_match_for_inline_p):
Handle all sanitizer options.
(can_inline_edge_p): Use renamed CIF_* enum value.
2020-06-09 Joe Ramsay <joe.ramsay@arm.com>
* config/aarch64/aarch64-sve.md (<optab><mode>2): Add support for
unpacked vectors.
(@aarch64_pred_<optab><mode>): Add support for unpacked vectors.
(@aarch64_bic<mode>): Enable unpacked BIC.
(*bic<mode>3): Enable unpacked BIC.
2020-06-09 Martin Liska <mliska@suse.cz>
PR gcov-profile/95365
* doc/gcov.texi: Compile and link one example in 2 steps.
2020-06-09 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/95527
* match.pd (__builtin_ffs (X) cmp CST): New optimizations.
2020-06-09 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/ppc-auxv.h (PPC_PLATFORM_FUTURE): Allocate
'future' PowerPC platform.
(PPC_FEATURE2_ARCH_3_1): New HWCAP2 bit for ISA 3.1.
(PPC_FEATURE2_MMA): New HWCAP2 bit for MMA.
* config/rs6000/rs6000-call.c (cpu_supports_info): Add ISA 3.1 and
MMA HWCAP2 bits.
* config/rs6000/rs6000.c (CLONE_ISA_3_1): New clone support.
(rs6000_clone_map): Add 'future' system target_clones support.
2020-06-08 Tobias Burnus <tobias@codesourcery.com>
PR lto/94848
PR middle-end/95551
* omp-offload.c (add_decls_addresses_to_decl_constructor,
omp_finish_file): Skip removed items.
* lto-cgraph.c (output_offload_tables): Likewise; set force_output
to this node for variables and functions.
2020-06-08 Jason Merrill <jason@redhat.com>
* aclocal.m4: Remove ax_cxx_compile_stdcxx.m4.
* configure.ac: Remove AX_CXX_COMPILE_STDCXX.
* configure: Regenerate.
2020-06-08 Martin Sebor <msebor@redhat.com>
* postreload.c (reload_cse_simplify_operands): Clear first array element
before using it. Assert a precondition.
2020-06-08 Jakub Jelinek <jakub@redhat.com>
PR target/95528
* tree-ssa-forwprop.c (simplify_vector_constructor): Don't use
VEC_UNPACK*_EXPR or VEC_PACK_TRUNC_EXPR with scalar modes unless the
type is vector boolean.
2020-06-08 Tamar Christina <tamar.christina@arm.com>
* config/aarch64/aarch64.c (aarch64_layout_frame): Expand comments.
2020-06-08 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/predicates.md (vfp_register_operand): Use VFP_HI_REGS
instead of VFP_REGS.
2020-06-08 Martin Liska <mliska@suse.cz>
* config/rs6000/vector.md: Replace FAIL with gcc_unreachable
in all vcond* patterns.
2020-06-08 Christophe Lyon <christophe.lyon@linaro.org>
* common/config/arm/arm-common.c (INCLUDE_ALGORITHM):
Define. No longer include <algorithm>.
2020-06-07 Roger Sayle <roger@nextmovesoftware.com>
* config/i386/i386.md (paritydi2, paritysi2): Expand reduction
via shift and xor to an USPEC PARITY matching a parityhi2_cmp.
(paritydi2_cmp, paritysi2_cmp): Delete these define_insn_and_split.
(parityhi2, parityqi2): New expanders.
(parityhi2_cmp): Implement set parity flag with xorb insn.
(parityqi2_cmp): Implement set parity flag with testb insn.
New peephole2s to use these insns (UNSPEC PARITY) when appropriate.
2020-06-07 Jiufu Guo <guojiufu@linux.ibm.com>
PR target/95018
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Override flag_cunroll_grow_size.
2020-06-07 Jiufu Guo <guojiufu@linux.ibm.com>
* common.opt (flag_cunroll_grow_size): New flag.
* toplev.c (process_options): Set flag_cunroll_grow_size.
* tree-ssa-loop-ivcanon.c (pass_complete_unroll::execute):
Use flag_cunroll_grow_size.
2020-06-06 Jan Hubicka <hubicka@ucw.cz>
PR lto/95548
* ipa-devirt.c (struct odr_enum_val): Turn values to wide_int.
(ipa_odr_summary_write): Update streaming.
(ipa_odr_read_section): Update streaming.
2020-06-06 Alexandre Oliva <oliva@adacore.com>
PR driver/95456
* gcc.c (do_spec_1): Don't call memcpy (_, NULL, 0).
2020-06-05 Thomas Schwinge <thomas@codesourcery.com>
Julian Brown <julian@codesourcery.com>
* gimplify.c (gimplify_adjust_omp_clauses): Remove
'GOMP_MAP_STRUCT' mapping from OpenACC 'exit data' directives.
2020-06-05 Richard Biener <rguenther@suse.de>
PR tree-optimization/95539
* tree-vect-data-refs.c
(vect_slp_analyze_and_verify_instance_alignment): Use
SLP_TREE_REPRESENTATIVE for the data-ref check.
* tree-vect-stmts.c (vectorizable_load): Reset stmt_info
back to the first scalar stmt rather than the
SLP_TREE_REPRESENTATIVE to match previous behavior.
2020-06-05 Felix Yang <felix.yang@huawei.com>
PR target/95254
* expr.c (emit_move_insn): Check src and dest of the copy to see
if one or both of them are subregs, try to remove the subregs when
innermode and outermode are equal in size and the mode change involves
an implicit round trip through memory.
2020-06-05 Jakub Jelinek <jakub@redhat.com>
PR target/95535
* config/i386/i386.md (*ctzsi2_zext, *clzsi2_lzcnt_zext): New
define_insn_and_split patterns.
(*ctzsi2_zext_falsedep, *clzsi2_lzcnt_zext_falsedep): New
define_insn patterns.
2020-06-05 Jonathan Wakely <jwakely@redhat.com>
* alloc-pool.h (object_allocator::remove_raw): New.
* tree-ssa-math-opts.c (struct occurrence): Use NSMDI.
(occurrence::occurrence): Add.
(occurrence::~occurrence): Likewise.
(occurrence::new): Likewise.
(occurrence::delete): Likewise.
(occ_new): Remove.
(insert_bb): Use new occurence (...) instead of occ_new.
(register_division_in): Likewise.
(free_bb): Use delete occ instead of manually removing
from the pool.
2020-06-05 Richard Biener <rguenther@suse.de>
PR middle-end/95493
* cfgexpand.c (expand_debug_expr): Avoid calling
set_mem_attributes_minus_bitpos when we were expanding
an SSA name.
* emit-rtl.c (set_mem_attributes_minus_bitpos): Remove
ARRAY_REF special-casing, add CONSTRUCTOR to the set of
special-cases we do not want MEM_EXPRs for. Assert
we end up with reasonable MEM_EXPRs.
2020-06-05 Lili Cui <lili.cui@intel.com>
PR target/95525
* config/i386/i386.h (PTA_WAITPKG): Change bitmask value.
2020-06-04 Martin Sebor <msebor@redhat.com>
PR middle-end/10138
PR middle-end/95136
* attribs.c (init_attr_rdwr_indices): Move function here.
* attribs.h (rdwr_access_hash, rdwr_map): Define.
(attr_access): Add 'none'.
(init_attr_rdwr_indices): Declared function.
* builtins.c (warn_for_access)): New function.
(check_access): Call it.
* builtins.h (checK-access): Add an optional argument.
* calls.c (rdwr_access_hash, rdwr_map): Move to attribs.h.
(init_attr_rdwr_indices): Declare extern.
(append_attrname): Handle attr_access::none.
(maybe_warn_rdwr_sizes): Same.
(initialize_argument_information): Update comments.
* doc/extend.texi (attribute access): Document 'none'.
* tree-ssa-uninit.c (struct wlimits): New.
(maybe_warn_operand): New function.
(maybe_warn_pass_by_reference): Same.
(warn_uninitialized_vars): Refactor code into maybe_warn_operand.
Also call for function calls.
(pass_late_warn_uninitialized::execute): Adjust comments.
(execute_early_warn_uninitialized): Same.
2020-06-04 Vladimir Makarov <vmakarov@redhat.com>
PR middle-end/95464
* lra.c (lra_emit_move): Add processing STRICT_LOW_PART.
* lra-constraints.c (match_reload): Use STRICT_LOW_PART in output
reload if the original insn has it too.
2020-06-04 Richard Biener <rguenther@suse.de>
* config/aarch64/aarch64.c (aarch64_gimplify_va_arg_expr):
Ensure that tmp_ha is marked TREE_ADDRESSABLE.
2020-06-04 Martin Jambor <mjambor@suse.cz>
PR ipa/95113
* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Move non-call
exceptions check to...
* tree-eh.c (stmt_unremovable_because_of_non_call_eh_p): ...this
new function.
* tree-eh.h (stmt_unremovable_because_of_non_call_eh_p): Declare it.
* ipa-sra.c (isra_track_scalar_value_uses): Use it. New parameter
fun.
2020-06-04 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
PR target/94735
* config/arm/predicates.md (mve_scatter_memory): Define to
match (mem (reg)) for scatter store memory.
* config/arm/mve.md (mve_vstrbq_scatter_offset_<supf><mode>): Modify
define_insn to define_expand.
(mve_vstrbq_scatter_offset_p_<supf><mode>): Likewise.
(mve_vstrhq_scatter_offset_<supf><mode>): Likewise.
(mve_vstrhq_scatter_shifted_offset_p_<supf><mode>): Likewise.
(mve_vstrhq_scatter_shifted_offset_<supf><mode>): Likewise.
(mve_vstrdq_scatter_offset_p_<supf>v2di): Likewise.
(mve_vstrdq_scatter_offset_<supf>v2di): Likewise.
(mve_vstrdq_scatter_shifted_offset_p_<supf>v2di): Likewise.
(mve_vstrdq_scatter_shifted_offset_<supf>v2di): Likewise.
(mve_vstrhq_scatter_offset_fv8hf): Likewise.
(mve_vstrhq_scatter_offset_p_fv8hf): Likewise.
(mve_vstrhq_scatter_shifted_offset_fv8hf): Likewise.
(mve_vstrhq_scatter_shifted_offset_p_fv8hf): Likewise.
(mve_vstrwq_scatter_offset_fv4sf): Likewise.
(mve_vstrwq_scatter_offset_p_fv4sf): Likewise.
(mve_vstrwq_scatter_offset_p_<supf>v4si): Likewise.
(mve_vstrwq_scatter_offset_<supf>v4si): Likewise.
(mve_vstrwq_scatter_shifted_offset_fv4sf): Likewise.
(mve_vstrwq_scatter_shifted_offset_p_fv4sf): Likewise.
(mve_vstrwq_scatter_shifted_offset_p_<supf>v4si): Likewise.
(mve_vstrwq_scatter_shifted_offset_<supf>v4si): Likewise.
(mve_vstrbq_scatter_offset_<supf><mode>_insn): Define insn for scatter
stores.
(mve_vstrbq_scatter_offset_p_<supf><mode>_insn): Likewise.
(mve_vstrhq_scatter_offset_<supf><mode>_insn): Likewise.
(mve_vstrhq_scatter_shifted_offset_p_<supf><mode>_insn): Likewise.
(mve_vstrhq_scatter_shifted_offset_<supf><mode>_insn): Likewise.
(mve_vstrdq_scatter_offset_p_<supf>v2di_insn): Likewise.
(mve_vstrdq_scatter_offset_<supf>v2di_insn): Likewise.
(mve_vstrdq_scatter_shifted_offset_p_<supf>v2di_insn): Likewise.
(mve_vstrdq_scatter_shifted_offset_<supf>v2di_insn): Likewise.
(mve_vstrhq_scatter_offset_fv8hf_insn): Likewise.
(mve_vstrhq_scatter_offset_p_fv8hf_insn): Likewise.
(mve_vstrhq_scatter_shifted_offset_fv8hf_insn): Likewise.
(mve_vstrhq_scatter_shifted_offset_p_fv8hf_insn): Likewise.
(mve_vstrwq_scatter_offset_fv4sf_insn): Likewise.
(mve_vstrwq_scatter_offset_p_fv4sf_insn): Likewise.
(mve_vstrwq_scatter_offset_p_<supf>v4si_insn): Likewise.
(mve_vstrwq_scatter_offset_<supf>v4si_insn): Likewise.
(mve_vstrwq_scatter_shifted_offset_fv4sf_insn): Likewise.
(mve_vstrwq_scatter_shifted_offset_p_fv4sf_insn): Likewise.
(mve_vstrwq_scatter_shifted_offset_p_<supf>v4si_insn): Likewise.
(mve_vstrwq_scatter_shifted_offset_<supf>v4si_insn): Likewise.
2020-06-04 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/arm/arm_mve.h (__arm_vbicq_n_u16): Correct the intrinsic
arguments.
(__arm_vbicq_n_s16): Likewise.
(__arm_vbicq_n_u32): Likewise.
(__arm_vbicq_n_s32): Likewise.
(__arm_vbicq): Modify polymorphic variant.
2020-06-04 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (vect_get_slp_vect_def): Declare.
* tree-vect-loop.c (vect_create_epilog_for_reduction): Use it.
* tree-vect-stmts.c (vect_transform_stmt): Likewise.
(vect_is_simple_use): Use SLP_TREE_REPRESENTATIVE.
* tree-vect-slp.c (vect_get_slp_vect_defs): Fold into single
use ...
(vect_get_slp_defs): ... here.
(vect_get_slp_vect_def): New function.
2020-06-04 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (_slp_tree::lanes): New.
(SLP_TREE_LANES): Likewise.
* tree-vect-loop.c (vect_create_epilog_for_reduction): Use it.
(vectorizable_reduction): Likewise.
(vect_transform_cycle_phi): Likewise.
(vectorizable_induction): Likewise.
(vectorizable_live_operation): Likewise.
* tree-vect-slp.c (_slp_tree::_slp_tree): Initialize lanes.
(vect_create_new_slp_node): Likewise.
(slp_copy_subtree): Copy it.
(vect_optimize_slp): Use it.
(vect_slp_analyze_node_operations_1): Likewise.
(vect_slp_convert_to_external): Likewise.
(vect_bb_vectorization_profitable_p): Likewise.
* tree-vect-stmts.c (vectorizable_load): Likewise.
(get_vectype_for_scalar_type): Likewise.
2020-06-04 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_update_all_shared_vectypes): Remove.
(vect_build_slp_tree_2): Simplify building all external op
nodes from scalars.
(vect_slp_analyze_node_operations): Remove push/pop of
STMT_VINFO_DEF_TYPE.
(vect_schedule_slp_instance): Likewise.
* tree-vect-stmts.c (ect_check_store_rhs): Pass in the
stmt_info, use the vect_is_simple_use overload combining
SLP and stmt_info analysis.
(vect_is_simple_cond): Likewise.
(vectorizable_store): Adjust.
(vectorizable_condition): Likewise.
(vect_is_simple_use): Fully handle invariant SLP nodes
here. Amend stmt_info operand extraction with COND_EXPR
and masked stores.
* tree-vect-loop.c (vectorizable_reduction): Deal with
COND_EXPR representation ugliness.
2020-06-04 Hongtao Liu <hongtao.liu@inte.com>
PR target/95254
* config/i386/sse.md (*vcvtps2ph_store<merge_mask_name>):
Refine from *vcvtps2ph_store<mask_name>.
(vcvtps2ph256<mask_name>): Refine constraint from vm to v.
(<mask_codefor>avx512f_vcvtps2ph512<mask_name>): Ditto.
(*vcvtps2ph256<merge_mask_name>): New define_insn.
(*avx512f_vcvtps2ph512<merge_mask_name>): Ditto.
* config/i386/subst.md (merge_mask): New define_subst.
(merge_mask_name): New define_subst_attr.
(merge_mask_operand3): Ditto.
2020-06-04 Hao Liu <hliu@os.amperecomputing.com>
PR tree-optimization/89430
* tree-ssa-phiopt.c
(struct name_to_bb): Rename to ref_to_bb; add a new field exp;
remove ssa_name_ver, store, offset fields.
(struct ssa_names_hasher): Rename to refs_hasher; update functions.
(class nontrapping_dom_walker): Rename m_seen_ssa_names to m_seen_refs.
(nontrapping_dom_walker::add_or_mark_expr): Extend to support ARRAY_REFs
and COMPONENT_REFs.
2020-06-04 Andreas Schwab <schwab@suse.de>
PR target/95154
* config/ia64/ia64.h (ASM_OUTPUT_FDESC): Call assemble_external.
2020-06-04 Hongtao.liu <hongtao.liu@intel.com>
* config/i386/sse.md (pmov_dst_3_lower): New mode attribute.
(trunc<mode><pmov_dst_3_lower>2): Refine from
trunc<mode><pmov_dst_3>2.
2020-06-03 Vitor Guidi <vitor.guidi@usp.br>
* match.pd (tanh/sinh -> 1/cosh): New simplification.
2020-06-03 Aaron Sawdey <acsawdey@linux.ibm.com>
PR target/95347
* config/rs6000/rs6000.c (is_stfs_insn): Rename to
is_lfs_stfs_insn and make it recognize lfs as well.
(prefixed_store_p): Use is_lfs_stfs_insn().
(prefixed_load_p): Use is_lfs_stfs_insn() to recognize lfs.
2020-06-03 Jan Hubicka <hubicka@ucw.cz>
* ipa-devirt.c: Include data-streamer.h, lto-streamer.h and
streamer-hooks.h.
(odr_enums): New static var.
(struct odr_enum_val): New struct.
(class odr_enum): New struct.
(odr_enum_map): New hashtable.
(odr_types_equivalent_p): Drop code testing TYPE_VALUES.
(add_type_duplicate): Likewise.
(free_odr_warning_data): Do not free TYPE_VALUES.
(register_odr_enum): New function.
(ipa_odr_summary_write): New function.
(ipa_odr_read_section): New function.
(ipa_odr_summary_read): New function.
(class pass_ipa_odr): New pass.
(make_pass_ipa_odr): New function.
* ipa-utils.h (register_odr_enum): Declare.
* lto-section-in.c: (lto_section_name): Add odr_types section.
* lto-streamer.h (enum lto_section_type): Add odr_types section.
* passes.def: Add odr_types pass.
* lto-streamer-out.c (DFS::DFS_write_tree_body): Do not stream
TYPE_VALUES.
(hash_tree): Likewise.
* tree-streamer-in.c (lto_input_ts_type_non_common_tree_pointers):
Likewise.
* tree-streamer-out.c (write_ts_type_non_common_tree_pointers):
Likewise.
* timevar.def (TV_IPA_ODR): New timervar.
* tree-pass.h (make_pass_ipa_odr): Declare.
* tree.c (free_lang_data_in_type): Regiser ODR types.
2020-06-03 Romain Naour <romain.naour@gmail.com>
* Makefile.in (SELFTEST_DEPS): Move before including language makefile
fragments.
2020-06-03 Richard Biener <rguenther@suse.de>
PR tree-optimization/95487
* tree-vect-stmts.c (vectorizable_store): Use a truth type
for the scatter mask.
2020-06-03 Richard Biener <rguenther@suse.de>
PR tree-optimization/95495
* tree-vect-slp.c (vect_slp_analyze_node_operations): Use
SLP_TREE_REPRESENTATIVE in the shift assertion.
2020-06-03 Tom Tromey <tromey@adacore.com>
* spellcheck.c (CASE_COST): New define.
(BASE_COST): New define.
(get_edit_distance): Recognize case changes.
(get_edit_distance_cutoff): Update.
(test_edit_distances): Update.
(get_old_cutoff): Update.
(test_find_closest_string): Add case sensitivity test.
2020-06-03 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_bb_vectorization_profitable_p): Loop over
the cost vector to unset the visited flag on stmts.
2020-06-03 Tobias Burnus <tobias@codesourcery.com>
* gimplify.c (omp_notice_variable): Use new hook.
* langhooks-def.h (lhd_omp_predetermined_mapping): Declare.
(LANG_HOOKS_OMP_PREDETERMINED_MAPPING): Define
(LANG_HOOKS_DECLS): Add it.
* langhooks.c (lhd_omp_predetermined_sharing): Remove bogus unused attr.
(lhd_omp_predetermined_mapping): New.
* langhooks.h (struct lang_hooks_for_decls): Add new hook.
2020-06-03 Jan Hubicka <jh@suse.cz>
* lto-streamer.h (LTO_tags): Reorder so frequent tags has small indexes;
add LTO_first_tree_tag and LTO_first_gimple_tag.
(lto_tag_is_tree_code_p): Update.
(lto_tag_is_gimple_code_p): Update.
(lto_gimple_code_to_tag): Update.
(lto_tag_to_gimple_code): Update.
(lto_tree_code_to_tag): Update.
(lto_tag_to_tree_code): Update.
2020-06-02 Felix Yang <felix.yang@huawei.com>
PR target/95459
* config/aarch64/aarch64.c (aarch64_short_vector_p):
Leave later code to report an error if SVE is disabled.
2020-06-02 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/aarch64/aarch64-cores.def (zeus): Define.
* config/aarch64/aarch64-tune.md: Regenerate.
* doc/invoke.texi (AArch64 Options): Document zeus -mcpu option.
2020-06-02 Aaron Sawdey <acsawdey@linux.ibm.com>
PR target/95347
* config/rs6000/rs6000.c (prefixed_store_p): Add special case
for stfs.
(is_stfs_insn): New helper function.
2020-06-02 Jan Hubicka <jh@suse.cz>
* lto-streamer-in.c (stream_read_tree_ref): Simplify streaming of
references.
* lto-streamer-out.c (stream_write_tree_ref): Likewise.
2020-06-02 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn-hsa.h (CC1_SPEC): Delete.
* config/gcn/gcn.opt (-mlocal-symbol-id): Delete.
* config/gcn/mkoffload.c (main): Don't use -mlocal-symbol-id.
2020-06-02 Eric Botcazou <ebotcazou@adacore.com>
PR middle-end/95395
* optabs.c (expand_unop): Fix bits/bytes confusion in latest change.
* tree-pretty-print.c (dump_generic_node) <ARRAY_TYPE>: Print quals.
2020-06-02 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
* config/s390/s390.c (print_operand): Emit vector alignment
hints for z13.
2020-06-02 Martin Liska <mliska@suse.cz>
* coverage.c (get_coverage_counts): Skip sanity check for TOP N counters
as they have variable number of counters.
* gcov-dump.c (main): Add new option -r.
(print_usage): Likewise.
(tag_counters): All new raw format.
* gcov-io.h (struct gcov_kvp): New.
(GCOV_TOPN_VALUES): Remove.
(GCOV_TOPN_VALUES_COUNTERS): Likewise.
(GCOV_TOPN_MEM_COUNTERS): New.
(GCOV_TOPN_DISK_COUNTERS): Likewise.
(GCOV_TOPN_MAXIMUM_TRACKED_VALUES): Likewise.
* ipa-profile.c (ipa_profile_generate_summary): Use
GCOV_TOPN_MAXIMUM_TRACKED_VALUES.
(ipa_profile_write_edge_summary): Likewise.
(ipa_profile_read_edge_summary): Likewise.
(ipa_profile): Remove usage of GCOV_TOPN_VALUES.
* profile.c (sort_hist_values): Sort variable number
of counters.
(compute_value_histograms): Special case for TOP N counters
that have dynamic number of key-value pairs.
* value-prof.c (dump_histogram_value): Dump variable number
of key-value pairs.
(stream_in_histogram_value): Stream in variable number
of key-value pairs for TOP N counter.
(get_nth_most_common_value): Deal with variable number
of key-value pairs.
(dump_ic_profile): Use GCOV_TOPN_MAXIMUM_TRACKED_VALUES
for loop iteration.
(gimple_find_values_to_profile): Set GCOV_TOPN_MEM_COUNTERS
to n_counters.
* doc/gcov-dump.texi: Document new -r option.
2020-06-02 Iain Buclaw <ibuclaw@gdcproject.org>
PR target/95420
* config.gcc (arm-wrs-vxworks7*): Set default cpu to generic-armv7-a.
2020-06-01 Jeff Law <law@torsion.usersys.redhat.com>
* lower-subreg.c (resolve_simple_move): If simplify_gen_subreg_concatn
returns (const_int 0) for the destination, then emit nothing.
2020-06-01 Jan Hubicka <hubicka@ucw.cz>
* lto-streamer.h (enum LTO_tags): Remove LTO_field_decl_ref,
LTO_function_decl_ref, LTO_label_decl_ref, LTO_namespace_decl_ref,
LTO_result_decl_ref, LTO_type_decl_ref, LTO_type_ref,
LTO_const_decl_ref, LTO_imported_decl_ref,
LTO_translation_unit_decl_ref, LTO_global_decl_ref and
LTO_namelist_decl_ref; add LTO_global_stream_ref.
* lto-streamer-in.c (lto_input_tree_ref): Simplify.
(lto_input_scc): Update.
(lto_input_tree_1): Update.
* lto-streamer-out.c (lto_indexable_tree_ref): Simlify.
* lto-streamer.c (lto_tag_name): Update.
2020-06-01 Jan Hubicka <hubicka@ucw.cz>
* ipa-reference.c (stream_out_bitmap): Use lto_output_var_decl_ref.
(ipa_reference_read_optimization_summary): Use lto_intput_var_decl_ref.
* lto-cgraph.c (lto_output_node): Likewise.
(lto_output_varpool_node): Likewise.
(output_offload_tables): Likewise.
(input_node): Likewise.
(input_varpool_node): Likewise.
(input_offload_tables): Likewise.
* lto-streamer-in.c (lto_input_tree_ref): Declare.
(lto_input_var_decl_ref): Declare.
(lto_input_fn_decl_ref): Declare.
* lto-streamer-out.c (lto_indexable_tree_ref): Use only one decl stream.
(lto_output_var_decl_index): Rename to ..
(lto_output_var_decl_ref): ... this.
(lto_output_fn_decl_index): Rename to ...
(lto_output_fn_decl_ref): ... this.
* lto-streamer.h (enum lto_decl_stream_e_t): Remove per-type streams.
(DEFINE_DECL_STREAM_FUNCS): Remove.
(lto_output_var_decl_index): Remove.
(lto_output_fn_decl_index): Remove.
(lto_output_var_decl_ref): Declare.
(lto_output_fn_decl_ref): Declare.
(lto_input_var_decl_ref): Declare.
(lto_input_fn_decl_ref): Declare.
2020-06-01 Feng Xue <fxue@os.amperecomputing.com>
* cgraphclones.c (materialize_all_clones): Adjust replace map dump.
* ipa-param-manipulation.c (ipa_dump_adjusted_parameters): Do not
dump infomation if there is no adjusted parameter.
* (ipa_param_adjustments::dump): Adjust prefix spaces for dump string.
2020-06-01 Aldy Hernandez <aldyh@redhat.com>
* Makefile.in (gimple-array-bounds.o): New.
* tree-vrp.c: Move array bounds code...
* gimple-array-bounds.cc: ...here...
* gimple-array-bounds.h: ...and here.
2020-06-01 Aldy Hernandez <aldyh@redhat.com>
* Makefile.in (OBJS): Add value-range-equiv.o.
* tree-vrp.c (*value_range_equiv*): Move to...
* value-range-equiv.cc: ...here.
* tree-vrp.h (class value_range_equiv): Move to...
* value-range-equiv.h: ...here.
* vr-values.h: Include value-range-equiv.h.
2020-06-01 Feng Xue <fxue@os.amperecomputing.com>
PR ipa/93429
* ipa-cp.c (propagate_aggs_across_jump_function): Check aggregate
lattice for simple pass-through by-ref argument.
2020-05-31 Jeff Law <law@redhat.com>
* lra.c (add_auto_inc_notes): Remove function.
* reload1.c (add_auto_inc_notes): Similarly. Move into...
* rtlanal.c (add_auto_inc_notes): New function.
* rtl.h (add_auto_inc_notes): Add prototype.
* recog.c (peep2_attempt): Scan and add REG_INC notes to new insns
as needed.
2020-05-31 Jan Hubicka <jh@suse.cz>
* lto-section-out.c (lto_output_decl_index): Remove.
(lto_output_field_decl_index): Move to lto-streamer-out.c
(lto_output_fn_decl_index): Move to lto-streamer-out.c
(lto_output_namespace_decl_index): Remove.
(lto_output_var_decl_index): Remove.
(lto_output_type_decl_index): Remove.
(lto_output_type_ref_index): Remove.
* lto-streamer-out.c (output_type_ref): Remove.
(lto_get_index): New function.
(lto_output_tree_ref): Remove.
(lto_indexable_tree_ref): New function.
(lto_output_var_decl_index): Move here from lto-section-out.c; simplify.
(lto_output_fn_decl_index): Move here from lto-section-out.c; simplify.
(stream_write_tree_ref): Update.
(lto_output_tree): Update.
* lto-streamer.h (lto_output_decl_index): Remove prototype.
(lto_output_field_decl_index): Remove prototype.
(lto_output_namespace_decl_index): Remove prototype.
(lto_output_type_decl_index): Remove prototype.
(lto_output_type_ref_index): Remove prototype.
(lto_output_var_decl_index): Move.
(lto_output_fn_decl_index): Move
2020-05-31 Jakub Jelinek <jakub@redhat.com>
PR middle-end/95052
* expr.c (store_expr): For shortedned_string_cst, ensure temp has
BLKmode.
2020-05-31 Jeff Law <law@redhat.com>
* config/h8300/jumpcall.md (brabs, brabc): Disable patterns.
2020-05-31 Jim Wilson <jimw@sifive.com>
* config/riscv/riscv.md (zero_extendsidi2_shifted): New.
2020-05-30 Jonathan Yong <10walls@gmail.com>
* config/i386/mingw32.h (REAL_LIBGCC_SPEC): Insert -lkernel32
after -lmsvcrt. This is necessary as libmsvcrt.a is not a pure
import library, but also contains some functions that invoke
others in KERNEL32.DLL.
2020-05-29 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/altivec.md (altivec_vmrghw_direct): Prefer VSX form.
(altivec_vmrglw_direct): Ditto.
(altivec_vperm_<mode>_direct): Ditto.
(altivec_vperm_v8hiv16qi): Ditto.
(*altivec_vperm_<mode>_uns_internal): Ditto.
(*altivec_vpermr_<mode>_internal): Ditto.
(vperm_v8hiv4si): Ditto.
(vperm_v16qiv8hi): Ditto.
2020-05-29 Jan Hubicka <jh@suse.cz>
* lto-streamer-in.c (streamer_read_chain): Move here from
tree-streamer-in.c.
(stream_read_tree_ref): New.
(lto_input_tree_1): Simplify.
* lto-streamer-out.c (stream_write_tree_ref): New.
(lto_write_tree_1): Simplify.
(lto_output_tree_1): Simplify.
(DFS::DFS_write_tree): Simplify.
(streamer_write_chain): Move here from tree-stremaer-out.c.
* lto-streamer.h (lto_output_tree_ref): Update prototype.
(stream_read_tree_ref): Declare
(stream_write_tree_ref): Declare
* tree-streamer-in.c (streamer_read_chain): Update to use
stream_read_tree_ref.
(lto_input_ts_common_tree_pointers): Likewise.
(lto_input_ts_vector_tree_pointers): Likewise.
(lto_input_ts_poly_tree_pointers): Likewise.
(lto_input_ts_complex_tree_pointers): Likewise.
(lto_input_ts_decl_minimal_tree_pointers): Likewise.
(lto_input_ts_decl_common_tree_pointers): Likewise.
(lto_input_ts_decl_with_vis_tree_pointers): Likewise.
(lto_input_ts_field_decl_tree_pointers): Likewise.
(lto_input_ts_function_decl_tree_pointers): Likewise.
(lto_input_ts_type_common_tree_pointers): Likewise.
(lto_input_ts_type_non_common_tree_pointers): Likewise.
(lto_input_ts_list_tree_pointers): Likewise.
(lto_input_ts_vec_tree_pointers): Likewise.
(lto_input_ts_exp_tree_pointers): Likewise.
(lto_input_ts_block_tree_pointers): Likewise.
(lto_input_ts_binfo_tree_pointers): Likewise.
(lto_input_ts_constructor_tree_pointers): Likewise.
(lto_input_ts_omp_clause_tree_pointers): Likewise.
* tree-streamer-out.c (streamer_write_chain): Update to use
stream_write_tree_ref.
(write_ts_common_tree_pointers): Likewise.
(write_ts_vector_tree_pointers): Likewise.
(write_ts_poly_tree_pointers): Likewise.
(write_ts_complex_tree_pointers): Likewise.
(write_ts_decl_minimal_tree_pointers): Likewise.
(write_ts_decl_common_tree_pointers): Likewise.
(write_ts_decl_non_common_tree_pointers): Likewise.
(write_ts_decl_with_vis_tree_pointers): Likewise.
(write_ts_field_decl_tree_pointers): Likewise.
(write_ts_function_decl_tree_pointers): Likewise.
(write_ts_type_common_tree_pointers): Likewise.
(write_ts_type_non_common_tree_pointers): Likewise.
(write_ts_list_tree_pointers): Likewise.
(write_ts_vec_tree_pointers): Likewise.
(write_ts_exp_tree_pointers): Likewise.
(write_ts_block_tree_pointers): Likewise.
(write_ts_binfo_tree_pointers): Likewise.
(write_ts_constructor_tree_pointers): Likewise.
(write_ts_omp_clause_tree_pointers): Likewise.
(streamer_write_tree_body): Likewise.
(streamer_write_integer_cst): Likewise.
* tree-streamer.h (streamer_read_chain):Declare.
(streamer_write_chain):Declare.
(streamer_write_tree_body): Update prototype.
(streamer_write_integer_cst): Update prototype.
2020-05-29 H.J. Lu <hjl.tools@gmail.com>
PR bootstrap/95413
* configure: Regenerated.
2020-05-29 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn-valu.md (add<mode>3_vcc_zext_dup): Add early clobber.
(add<mode>3_vcc_zext_dup_exec): Likewise.
(add<mode>3_vcc_zext_dup2): Likewise.
(add<mode>3_vcc_zext_dup2_exec): Likewise.
2020-05-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/95272
* tree-vectorizer.h (_slp_tree::representative): Add.
(SLP_TREE_REPRESENTATIVE): Likewise.
* tree-vect-loop.c (vectorizable_reduction): Adjust SLP
node gathering.
(vectorizable_live_operation): Use the representative to
attach the reduction info to.
* tree-vect-slp.c (_slp_tree::_slp_tree): Initialize
SLP_TREE_REPRESENTATIVE.
(vect_create_new_slp_node): Likewise.
(slp_copy_subtree): Copy it.
(vect_slp_rearrange_stmts): Re-arrange even COND_EXPR stmts.
(vect_slp_analyze_node_operations_1): Pass the representative
to vect_analyze_stmt.
(vect_schedule_slp_instance): Pass the representative to
vect_transform_stmt.
2020-05-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/95356
* tree-vect-stmts.c (vectorizable_shift): Do in-place SLP
node hacking during analysis.
2020-05-29 Jan Hubicka <hubicka@ucw.cz>
PR lto/95362
* lto-streamer-out.c (lto_output_tree): Disable redundant streaming.
2020-05-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/95403
* tree-vect-stmts.c (vect_init_vector_1): Guard against NULL
stmt_vinfo.
2020-05-29 Jakub Jelinek <jakub@redhat.com>
PR middle-end/95315
* omp-general.c (omp_resolve_declare_variant): Fix up addition of
declare variant cgraph node removal callback.
2020-05-29 Jakub Jelinek <jakub@redhat.com>
PR middle-end/95052
* expr.c (store_expr): If expr_size is constant and significantly
larger than TREE_STRING_LENGTH, set temp to just the
TREE_STRING_LENGTH portion of the STRING_CST.
2020-05-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/95393
* tree-ssa-phiopt.c (minmax_replacement): Use gimple_build
to build the min/max expression so we simplify cases like
MAX(0, s) immediately.
2020-05-29 Joe Ramsay <joe.ramsay@arm.com>
* config/aarch64/aarch64-sve.md (<LOGICAL:optab><mode>3): Add support
for unpacked EOR, ORR, AND.
2020-05-28 Nicolas Bértolo <nicolasbertolo@gmail.com>
* Makefile.in: don't look for libiberty in the "pic" subdirectory
when building for Mingw. Add dependency on xgcc with the proper
extension.
2020-05-28 Jeff Law <law@redhat.com>
* config/h8300/logical.md (bclrhi_msx): Remove pattern.
2020-05-28 Jeff Law <law@redhat.com>
* config/h8300/logical.md (HImode H8/SX bit-and splitter): Don't
make a nonzero adjustment to the memory offset.
(b<ior,xor>hi_msx): Turn into a splitter.
2020-05-28 Eric Botcazou <ebotcazou@adacore.com>
* gimple-ssa-store-merging.c (merged_store_group::can_be_merged_into):
Fix off-by-one error.
2020-05-28 Richard Sandiford <richard.sandiford@arm.com>
* config/aarch64/aarch64.h (aarch64_frame): Add a comment above
wb_candidate1 and wb_candidate2.
* config/aarch64/aarch64.c (aarch64_layout_frame): Invalidate
wb_candidate1 and wb_candidate2 if we decided not to use them.
2020-05-28 Richard Sandiford <richard.sandiford@arm.com>
PR testsuite/95361
* config/aarch64/aarch64.c (aarch64_expand_epilogue): Assert that
we have at least some CFI operations when using a frame pointer.
Only redefine the CFA if we have CFI operations.
2020-05-28 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_prologue_cost_for_slp): Remove
case for !SLP_TREE_VECTYPE.
(vect_slp_analyze_node_operations): Adjust.
2020-05-28 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (_slp_tree::vec_defs): Add.
(SLP_TREE_VEC_DEFS): Likewise.
* tree-vect-slp.c (_slp_tree::_slp_tree): Adjust.
(_slp_tree::~_slp_tree): Likewise.
(vect_mask_constant_operand_p): Remove unused function.
(vect_get_constant_vectors): Rename to...
(vect_create_constant_vectors): ... this. Take the
invariant node as argument and code generate it. Remove
dead code, remove temporary asserts. Pass a NULL stmt_info
to vect_init_vector.
(vect_get_slp_defs): Simplify.
(vect_schedule_slp_instance): Code-generate externals and
invariants using vect_create_constant_vectors.
2020-05-28 Richard Biener <rguenther@suse.de>
* tree-vect-stmts.c (vect_finish_stmt_generation_1):
Conditionalize stmt_info use, assert the new stmt cannot throw
when not specified.
(vect_finish_stmt_generation): Adjust assert.
2020-05-28 Richard Biener <rguenther@suse.de>