| 2010-12-31 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (substitute_in_type): Do not deal with |
| LANG_TYPE, METHOD_TYPE or OFFSET_TYPE. |
| * gcc-interface/utils.c (handle_vector_size_attribute): Do not deal |
| with METHOD_TYPE or OFFSET_TYPE. |
| |
| 2010-12-22 Nathan Froyd <froydnj@codesourcery.com> |
| |
| * gcc-interface/utils.c (handle_nonnull_attribute): Use prototype_p. |
| (handle_sentinel_attribute): Likewise. |
| |
| 2010-12-20 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| PR bootstrap/47027 |
| * a-stwiun-shared.ads: Rewrap overlong comment line. |
| |
| * projects.texi: Fix typos. |
| * gnat_rm.texi: Likewise. |
| * gnat_ugn.texi: Likewise. |
| * sem_util.adb: Fix typo in variable, typos in comments. |
| * a-btgbso.adb: Fix typos in comments. |
| * a-cbdlli.adb, a-cbhase.ads, a-cdlili.adb, a-cobove.adb, |
| a-coinve.adb, a-convec.adb, a-direct.ads, a-strunb-shared.adb, |
| a-strunb-shared.ads, a-stuten.ads, a-stwiun-shared.adb, |
| a-stwiun-shared.ads, a-stzunb-shared.adb, a-stzunb-shared.ads, |
| a-suenco.adb, a-suenst.adb, a-suewst.adb, a-suezst.adb, ali.ads, |
| aspects.ads, atree.ads, binde.adb, bindgen.adb, checks.adb, |
| checks.ads, einfo.ads, err_vars.ads, errout.adb, errout.ads, |
| exp_aggr.adb, exp_attr.adb, exp_cg.adb, exp_ch3.adb, |
| exp_ch4.adb, exp_ch5.adb, exp_ch6.adb, exp_ch7.adb, |
| exp_dbug.ads, exp_disp.adb, exp_fixd.ads, freeze.adb, |
| g-altive.ads, g-comlin.ads, g-excact.ads, g-mbdira.adb, |
| g-sechas.ads, g-sehash.ads, g-sha1.ads, g-sha224.ads, |
| g-sha256.ads, g-sha384.ads, g-sha512.ads, g-shsh32.ads, |
| g-shsh64.ads, g-socket.adb, g-socket.ads, g-sothco.ads, |
| gcc-interface/decl.c, gcc-interface/trans.c, |
| gcc-interface/utils2.c, gnat1drv.adb, init.c, inline.adb, |
| link.c, locales.c, make.adb, mingw32.h, namet.ads, osint.adb, |
| par-ch12.adb, par-ch13.adb, par-ch3.adb, par-ch4.adb, |
| par-prag.adb, par.adb, par_sco.adb, prepcomp.adb, |
| prj-conf.ads, prj-dect.adb, prj-env.adb, prj-env.ads, |
| prj-nmsc.adb, prj-tree.ads, prj-util.ads, prj.adb, prj.ads, |
| s-auxdec-vms-alpha.adb, s-auxdec-vms_64.ads, s-oscons-tmplt.c, |
| s-osinte-vxworks.ads, s-osprim-mingw.adb, s-regexp.adb, |
| s-stusta.adb, s-taprop-mingw.adb, s-taprop-solaris.adb, |
| scn.adb, scos.ads, sem.adb, sem_aggr.adb, sem_attr.adb, |
| sem_aux.adb, sem_aux.ads, sem_ch12.adb, sem_ch12.ads, |
| sem_ch13.adb, sem_ch13.ads, sem_ch3.adb, sem_ch4.adb, |
| sem_ch6.adb, sem_ch7.adb, sem_ch8.adb, sem_disp.adb, |
| sem_disp.ads, sem_eval.adb, sem_intr.adb, sem_prag.adb, |
| sem_res.adb, sem_scil.adb, sem_util.ads, sem_warn.adb, |
| sem_warn.ads, sinfo.ads, socket.c, styleg.adb, switch.ads, |
| sysdep.c, tb-alvxw.c, xoscons.adb: Likewise. |
| |
| 2010-12-13 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (gnat_to_gnu_entity) <E_General_Access_Type>: |
| Build a stub DECL for the dummy fat pointer type in the unconstrained |
| array case. |
| * gcc-interface/utils.c (update_pointer_to): Set the DECL_ORIGINAL_TYPE |
| for all the variants in the fat pointer case. |
| |
| 2010-12-13 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/trans.c (can_be_lower_p): New predicate. |
| (Loop_Statement_to_gnu): Do not generate the entry condition if we know |
| that it will be true. |
| |
| 2010-12-03 Joseph Myers <joseph@codesourcery.com> |
| |
| * gcc-interface/lang.opt (k8): New option. |
| |
| 2010-12-03 Alexandre Oliva <aoliva@redhat.com> |
| |
| * gnatvsn.adb (Gnat_Version_String): Don't overrun Ver_Len_Max. |
| * gnatvsn.ads (Ver_Len_Max): Bump up to 256. |
| * g-comver.adb (Ver_Len_Max): Likewise. |
| |
| 2010-12-03 Laurynas Biveinis <laurynas.biveinis@gmail.com> |
| |
| * gcc-interface/decl.c (struct subst_pair_d): Remove GTY tag. |
| (variant_desc_d): Likewise. |
| |
| 2010-12-01 Joseph Myers <joseph@codesourcery.com> |
| |
| * gcc-interface/misc.c (flag_compare_debug, flag_stack_check): |
| Undefine as macros then define as variables. |
| (gnat_post_options): Set variables from global_options. |
| |
| 2010-11-27 Eric Botcazou <ebotcazou@adacore.com> |
| |
| PR ada/46574 |
| * gcc-interface/utils2.c (compare_elmt_bitpos): Fix typos. |
| |
| 2010-11-27 Eric Botcazou <ebotcazou@adacore.com> |
| |
| PR ada/40777 |
| * gcc-interface/targtyps.c (get_target_double_scalar_alignment): Guard |
| use of TARGET_64BIT macro. |
| |
| 2010-11-27 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * s-osinte-linux.ads (sigset_t): Use unsigned_char subtype directly. |
| (unsigned_long_long_t): New modular type. |
| (pthread_cond_t): Add alignment clause. |
| |
| 2010-11-27 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gnatvsn.adb (Version_String): Change type to C-like array of chars. |
| (Gnat_Version_String): Adjust to above change. |
| |
| 2010-11-18 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (gnat_to_gnu_entity) <E_Subprogram_Type>: Also |
| use return-by-invisible-reference if the return type is By_Reference. |
| Tidy up and skip the processing of the return type if it is void. |
| |
| 2010-11-17 Joseph Myers <joseph@codesourcery.com> |
| |
| * gcc-interface/misc.c (gnat_parse_file): Take no arguments. |
| |
| 2010-11-17 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/trans.c (addressable_p): Rewrite obsolete paragraph in |
| head comment. |
| |
| 2010-11-12 Joseph Myers <joseph@codesourcery.com> |
| |
| * gcc-interface/Make-lang.in (ada/misc.o): Use $(OPTS_H). |
| * gcc-interface/misc.c (gnat_handle_option): Take location_t parameter. |
| |
| 2010-11-10 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/trans.c (gigi): Don't set 'pure' flag on SJLJ routines. |
| * gcc-interface/utils2.c (compare_arrays): Add LOC parameter. Set it |
| directly on all the comparison expressions. |
| (build_binary_op): Pass input_location to compare_arrays. |
| |
| 2010-11-10 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/trans.c (lvalue_required_p) <N_Type_Conversion>): Look |
| through it for elementary types as well. |
| <N_Unchecked_Type_Conversion>: Adjust to above change. |
| <N_Allocator>: Likewise. |
| (gnat_to_gnu): Do not attempt to rewrite boolean literals. |
| |
| 2010-11-10 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (gnat_to_gnu_entity): Do not set DECL_ARTIFICIAL |
| on the reused DECL node coming from a renamed object. |
| Set DECL_IGNORED_P on the DECL node built for renaming entities if they |
| don't need debug info. |
| |
| 2010-11-09 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/utils.c (save_gnu_tree): Improve comments. |
| (get_gnu_tree): Likewise. |
| |
| 2010-11-09 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (finish_fat_pointer_type): New function. |
| (gnat_to_gnu_entity) <E_Array_Type>: Use it to build the fat pointer |
| type. |
| <E_Access_Type>: Likewise. |
| |
| 2010-11-02 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/gigi.h (add_stmt_force): Declare. |
| (add_stmt_with_node_force): Likewise. |
| * gcc-interface/trans.c (Attribute_to_gnu): Don't set TREE_SIDE_EFFECTS |
| on the SAVE_EXPR built for cached expressions of parameter attributes. |
| (Subprogram_Body_to_gnu): Force evaluation of the SAVE_EXPR built for |
| cached expressions of parameter attributes. |
| (add_stmt_force): New function. |
| (add_stmt_with_node_force): Likewise. |
| |
| 2010-10-27 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/trans.c (gigi): Fix formatting issues. |
| (build_raise_check): Likewise. |
| (gnat_to_gnu): Likewise. |
| * gcc-interface/utils2.c (build_call_raise_range): Likewise. |
| (build_call_raise_column): Likewise. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch5.adb, exp_prag.adb, sem_ch3.adb, exp_atag.adb, layout.adb, |
| sem_dist.adb, exp_ch7.adb, exp_util.adb, exp_attr.adb, exp_ch9.adb, |
| sem_ch10.adb, checks.adb, sem_prag.adb, par-endh.adb, sem_ch12.adb, |
| exp_smem.adb, sem_attr.adb, exp_ch4.adb, exp_ch6.adb, exp_ch8.adb, |
| sem_ch6.adb, exp_disp.adb, exp_aggr.adb, exp_dist.adb, sem_ch13.adb, |
| par-ch3.adb, par-ch5.adb, exp_strm.adb, exp_ch3.adb: Minor reformatting |
| * opt.ads: Minor comment fix. |
| |
| 2010-10-26 Vincent Celier <celier@adacore.com> |
| |
| * gnat_ugn.texi: Document option -s for gnatlink. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * opt.ads: Move documentation on checksum stuff here from prj-nmsc |
| * prj-nmsc.adb (Process_Project_Level_Array_Attributes): Move |
| documentation on checksum versions to opt.ads. |
| |
| 2010-10-26 Vincent Celier <celier@adacore.com> |
| |
| * opt.ads (Checksum_Accumulate_Token_Checksum): New Boolean flag, |
| defaulted to True. |
| (Checksum_GNAT_6_3): New name of Old_Checksums |
| (Checksum_GNAT_5_03): New name of Old_Old_Checksums |
| * prj-nmsc.adb (Process_Project_Level_Array_Attributes): Adapt to new |
| names of Opt flags. |
| Set Checksum_Accumulate_Token_Checksum to False if GNAT version is 5.03 |
| or before. |
| * scng.adb (Accumulate_Token_Checksum_GNAT_6_3): New name of procedure |
| Accumulate_Token_Checksum_Old. |
| (Accumulate_Token_Checksum_GNAT_5_03): New name of procedure |
| Accumulate_Token_Checksum_Old_Old. |
| (Nlit): Call Accumulate_Token_Checksum only if |
| Opt.Checksum_Accumulate_Token_Checksum is True. |
| (Scan): Ditto |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch13.adb (Build_Invariant_Procedure): New calling sequence. |
| (Build_Invariant_Procedure): Properly handle analysis of invariant |
| expression with proper end-of-visible-decls visibility. |
| * sem_ch13.ads (Build_Invariant_Procedure): Changed calling sequence. |
| * sem_ch3.adb (Process_Full_View): Don't build invariant procedure |
| (too late). |
| (Analyze_Private_Extension_Declaration): Propagate invariant flags. |
| * sem_ch7.adb (Analyze_Package_Specification): Build invariant |
| procedures. |
| |
| 2010-10-26 Vincent Celier <celier@adacore.com> |
| |
| * opt.ads (Old_Checksums, Old_Old_Checksums): New Boolean flags, |
| defaulted to False. |
| * prj-nmsc.adb (Process_Project_Level_Array_Attributes): When |
| processing attribute Toolchain_Version ("Ada"), set Opt.Old_Checksums |
| and Opt.Old_Old_Checksums depending on the GNAT version. |
| * scng.adb (Accumulate_Token_Checksum_Old): New procedure. |
| (Accumulate_Token_Checksum_Old_Old): New procedure. |
| (Scan): For keywords, when Opt.Old_Checksums is True, call one of the |
| alternative procedures Accumulate_Token_Checksum_Old or |
| Accumulate_Token_Checksum_Old_Old, instead of Accumulate_Token_Checksum. |
| |
| 2010-10-26 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> |
| |
| * gcc-interface/utils2.c (build_compound_expr): New function. |
| * gcc-interface/gigi.h (build_compound_expr): Declare it. |
| * gcc-interface/trans.c (Attribute_to_gnu, call_to_gnu): Use it. |
| (gnat_to_gnu, case N_Expression_With_Actions): Likewise. |
| |
| 2010-10-26 Javier Miranda <miranda@adacore.com> |
| |
| * sem_prag.adb (Process_Import_Or_Interface): Skip primitives of |
| interface types when processing all the entities in the homonym chain |
| that are declared in the same declarative part. |
| |
| 2010-10-26 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch3.adb (Process_Range_In_Decl): If the range is part of a |
| quantified expression, the insertion point for range checks will be |
| arbitrarily far in the tree. |
| * sem_ch5.adb (One_Bound): Use Insert_Actions for the declaration of |
| the temporary that holds the value of the bounds. |
| * sem_res.adb (Resolve_Quantified_Expressions): Disable expansion of |
| condition until the full expression is expanded. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * opt.ads: Comment fix. |
| * sem_cat.adb: Treat categorization errors as warnings in GNAT Mode. |
| * switch-c.adb: GNAT Mode does not set |
| Treat_Categorization_Errors_As_Warnings. |
| |
| 2010-10-26 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch8.adb (Analyze_Subprogram_Renaming): Improve warning when an |
| operator renames another one with a different name. |
| |
| 2010-10-26 Thomas Quinot <quinot@adacore.com> |
| |
| * exp_ch4.adb, exp_pakd.adb: Minor reformatting. |
| |
| 2010-10-26 Bob Duff <duff@adacore.com> |
| |
| * namet.adb: Improve hash function. |
| |
| 2010-10-26 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_disp.adb: Minor reformatting. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch3.adb, sem_ch4.adb, sem_disp.adb, switch-c.adb: Minor |
| reformatting. |
| * gnat_ugn.texi: Document -gnateP switch. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * opt.ads (Treat_Categorization_Errors_As_Warnings): New flag |
| * sem_cat.adb (Check_Categorization_Dependencies): |
| Use Check_Categorization_Dependencies |
| * switch-c.adb: GNAT Mode sets Treat_Categorization_Errors_As_Warnings |
| -gnateP sets Treat_Categorization_Errors_As_Warnings |
| * usage.adb: Add line for -gnateP switch |
| |
| 2010-10-26 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch3.adb (Add_Internal_Interface_Entities): Handle primitives |
| inherited from the parent that cover interface primitives. |
| (Derive_Progenitor_Subprograms): Handle primitives inherited from |
| the parent that cover interface primitives. |
| * sem_disp.adb (Find_Primitive_Covering_Interface): When searching in |
| the list of primitives of the type extend the test to include inherited |
| private primitives. |
| * sem_ch6.ads (Is_Interface_Conformant): Add missing documentation. |
| * sem_ch7.adb (Declare_Inherited_Private_Subprograms): Add missing |
| barrier to the loop searching for explicit overriding primitives. |
| * sem_ch4.adb (Analyze_Indexed_Component_Form): Add missing barrier |
| before accessing attribute Entity. |
| |
| 2010-10-26 Bob Duff <duff@adacore.com> |
| |
| * make.adb: Call Namet.Finalize, so we can get statistics. |
| |
| 2010-10-26 Geert Bosch <bosch@adacore.com> |
| |
| * sem_ch6.adb (Analyze_Subprogram_Body_Helper): Use the subprogram_body |
| node to determine wether the subprogram is a rewritten parameterized |
| expression. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * opt.ads: Minor code reorganization. Alphabetize Warning switches. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * sem_res.adb, xsinfo.adb: Minor reformatting. |
| |
| 2010-10-26 Bob Duff <duff@adacore.com> |
| |
| * namet.adb (Finalize): More cleanup of statistics printouts. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * ceinfo.adb: Minor reformatting. |
| |
| 2010-10-26 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch6.adb (Check_Overriding_Indicator, New_Overloaded_Entity): When |
| setting attribute Overridden_Operation do not reference the entities |
| generated by Derive_Subprograms but their aliased entity (which |
| is the primitive inherited from the parent type). |
| |
| 2010-10-26 Bob Duff <duff@adacore.com> |
| |
| * namet.adb, namet.ads: Minor cleanup. |
| |
| 2010-10-26 Arnaud Charlet <charlet@adacore.com> |
| |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads, einfo.adb (Is_Base_Type): New function, use it where |
| appropriate. |
| * exp_ch6.adb, exp_dbug.adb, exp_disp.adb, freeze.adb, lib-xref.adb, |
| sem_aux.adb, sem_ch3.adb, sem_ch7.adb, sem_ch8.adb (Is_Base_Type): Use |
| this new abstraction where appropriate. |
| |
| 2010-10-26 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch12.adb: Code clean up. |
| |
| 2010-10-26 Paul Hilfinger <hilfinger@adacore.com> |
| |
| * exp_dbug.ads: Document effect of 'pragma Unchecked_Union' on |
| debugging data. |
| |
| 2010-10-26 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_util.adb (Note_Possible_Modification): If the target of an |
| assignment is the bound variable in an iterator, the domain of |
| iteration, i.e. array or container, is modified as well. |
| |
| 2010-10-26 Bob Duff <duff@adacore.com> |
| |
| * Make-generated.in: Make the relevant make targets depend on |
| ceinfo.adb and csinfo.adb. |
| * csinfo.adb, ceinfo.adb: Make sure it raises an exception on failure, |
| so when called from xeinfo, the failure will be noticed. |
| * sinfo.ads: Update comments to reflect the fact that xsinfo runs csinfo |
| * xsinfo.adb, xeinfo.adb: Run ceinfo to check for errors. Close files. |
| |
| 2010-10-26 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch4.adb: Set properly parent field of operands of concatenation. |
| |
| 2010-10-26 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_res.adb (Check_Infinite_Recursion): A recursive call within a |
| conditional expression or a case expression should not generate an |
| infinite recursion warning. |
| |
| 2010-10-26 Javier Miranda <miranda@adacore.com> |
| |
| * einfo.ads, einfo.adb (Is_Overriding_Operation): Removed. |
| (Set_Is_Overriding_Operation): Removed. |
| * sem_ch3.adb (Check_Abstract_Overriding): Remove redundant call to |
| Is_Overriding_Operation. |
| * exp_ch7.adb (Check_Visibly_Controlled): Remove redundant call to |
| Is_Overriding_Operation. |
| * sem_ch7.adb (Declare_Inherited_Private_Subprograms): Remove redundant |
| call to Set_Is_Overriding_Operation. |
| * sem_util.adb (Collect_Primitive_Operations): Replace test on |
| Is_Overriding_Operation by test on the presence of attribute |
| Overridden_Operation. |
| (Original_Corresponding_Operation): Remove redundant call to attribute |
| Is_Overriding_Operation. |
| * sem_ch6.adb (Analyze_Abstract_Subprogram_Declaration): Remove |
| redundant call to Is_Overriding_Operation. |
| (Verify_Overriding_Indicator): Replace several occurrences of test on |
| Is_Overriding_Operation by test on the presence of attribute |
| Overridden_Operation. |
| (Check_Convention): Replace test on Is_Overriding_Operation by test on |
| the presence of Overridden_Operation. |
| (Check_Overriding_Indicator): Add missing decoration of attribute |
| Overridden_Operation. Minor code cleanup. |
| (New_Overloaded_Entity): Replace occurrence of test on |
| Is_Overriding_Operation by test on the presence of attribute |
| Overridden_Operation. Remove redundant setting of attribute |
| Is_Overriding_Operation plus minor code reorganization. |
| Add missing decoration of attribute Overridden_Operation. |
| * sem_elim.adb (Set_Eliminated): Replace test on |
| Is_Overriding_Operation by test on the presence of Overridden_Operation. |
| * sem_ch8.adb (Analyze_Subprogram_Renaming): Replace test on |
| Is_Overriding_Operation by test on the presence of |
| Overridden_Operation. Remove a redundant test on attribute |
| Is_Overriding_Operation. |
| * lib-xref.adb (Generate_Reference): Replace test on |
| Is_Overriding_Operation by test on the presence of Overridden_Operation. |
| (Output_References): Replace test on Is_Overriding_Operation by test on |
| the presence of Overridden_Operation. |
| * sem_disp.adb (Override_Dispatching_Operation): Replace test on |
| Is_Overriding_Operation by test on the presence of Overridden_Operation. |
| Add missing decoration of attribute Overridden_Operation. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch13.adb (Adjust_Record_For_Reverse_Bit_Order): Properly check |
| RM 13.4.1(10). |
| |
| 2010-10-26 Bob Duff <duff@adacore.com> |
| |
| * sem_res.adb (Resolve_Actuals): In case of certain |
| internally-generated type conversions (created by OK_Convert_To, so the |
| Conversion_OK flag is set), avoid fetching the component type when it's |
| not really an array type, but a private type completed by an array type. |
| |
| 2010-10-26 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch5.adb: Adjust format of error message. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads, einfo.adb (OK_To_Reference): Removed, no longer used. |
| * exp_util.adb (Side_Effect_Free): Put in safety barrier in code to |
| detect renamings to avoid problems with invariants. |
| * sem_ch13.adb (Replace_Type_References_Generic): New procedure |
| (Build_Invariant_Procedure): Use Replace_Type_Reference_Generic |
| (Build_Predicate_Function): Use Replace_Type_Reference_Generic |
| * sem_res.adb, sem_ch8.adb, sem_ch4.adb (OK_To_Reference): Remove |
| references, flag is no longer set. |
| |
| 2010-10-26 Vincent Celier <celier@adacore.com> |
| |
| * prj.ads (Source_Data): New Boolean component Initialized, defaulted |
| to False, set to True when Source_Data is completely initialized. |
| * prj-env.adb: Minor comment fix. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * sem_case.adb, sem_ch6.adb, sem_util.adb: Minor reformatting. |
| |
| 2010-10-26 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch5.adb (Analyze_Iteration_Scheme): Diagnose attempt to use thew |
| form "for X in A" when A is an array object. This form is only intended |
| for containers. |
| * sem_eval.adb: Fix reference to non-existing field of type conversion |
| node. |
| * sem_case.adb (Check_Choices): Improve error reporting for overlapping |
| choices in case statements. |
| |
| 2010-10-26 Gary Dismukes <dismukes@adacore.com> |
| |
| * exp_disp.adb (Expand_Interface_Actuals): When expanding an actual for |
| a class-wide interface formal that involves applying a displacement |
| conversion to the actual, check for the case of calling a build-in-place |
| function and handle generation of the implicit BIP parameters (call |
| Make_Build_In_Place_Call_In_Anonymous_Context). |
| Add with and use of Exp_Ch6. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * sem_prag.adb, sem_cat.ads: Minor reformatting. |
| |
| 2010-10-26 Sergey Rybin <rybin@adacore.com> |
| |
| * vms_data.ads: Define VMS qualifier for gnatelim '--ignore' option |
| |
| 2010-10-26 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_util.adb (Has_Preelaborable_Initialization.Check_Components): |
| For a discriminant, use Discriminant_Default_Value rather than |
| Expression (Declaration_Node (D)). |
| |
| 2010-10-26 Geert Bosch <bosch@adacore.com> |
| |
| * sem_ch6.adb (Analyze_Subprogram_Body_Helper): Parameterized |
| expressions don't need a spec, even when style checks require |
| subprograms to have one. |
| |
| 2010-10-26 Arnaud Charlet <charlet@adacore.com> |
| |
| * gnatvsn.ads: Update comments. |
| |
| 2010-10-26 Matthew Heaney <heaney@adacore.com> |
| |
| * Makefile.rtl, impunit.adb: Add bounded hashed set and bounded hashed |
| map containers. |
| * a-cohata.ads: Add declaration of generic package for bounded hash |
| table types. |
| * a-chtgbo.ads, a-chtgbo.adb, a-chtgbk.ads, a-chtgbk.adb, a-cbhase.ads, |
| a-cbhase.adb, a-cbhama.ads, a-cbhama.adb: New files. |
| |
| 2010-10-26 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_warn.adb: Improve warning message on overlapping actuals. |
| |
| 2010-10-26 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_ch4.adb, exp_dist.adb: Minor reformatting. |
| |
| 2010-10-26 Vincent Celier <celier@adacore.com> |
| |
| * makeusg.adb (Makeusg): Add lines for switches -vl, -vm and -vh. |
| |
| 2010-10-26 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch3.adb (Expand_N_Object_Declaration): Move generation of |
| predicate check to analyzer, since too much rewriting occurs in the |
| analyzer. |
| * sem_ch13.adb (Build_Predicate_Function): Change calling sequence, and |
| change the order in which things are done to fix several errors in |
| dealing with qualification of the type name. |
| (Build_Static_Predicate): Built static predicate after full analysis |
| of the body. This is necessary to fix several problems. |
| * sem_ch3.adb (Analyze_Object_Declaration): Move predicate check here |
| from expander, since too much expansion occurs in the analyzer to leave |
| it that late. |
| (Analyze_Object_Declaration): Change parameter Include_Null to new name |
| Include_Implicit in Is_Partially_Initialized_Type call. |
| (Analyze_Subtype_Declaration): Make sure predicates are proapagated in |
| some strange cases of internal subtype generation. |
| * sem_util.ads, sem_util.adb (Is_Partially_Initialized_Type): Change |
| Include_Null to Include_Implicit, now includes the case of |
| discriminants. |
| |
| 2010-10-26 Sergey Rybin <rybin@adacore.com> |
| |
| * gnat_rm.texi: Revise the documentation for pragma Eliminate. |
| |
| 2010-10-26 Matthew Heaney <heaney@adacore.com> |
| |
| * Makefile.rtl, impunit.adb: Added bounded list container. |
| * a-cbdlli.ads, a-cbdlli.adb: New file. |
| |
| 2010-10-25 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/utils2.c: Include flags.h and remove prototypes. |
| (build_unary_op) <TRUTH_NOT_EXPR>: When not optimizing, fold the result |
| of the call to invert_truthvalue_loc. |
| * gcc-interface/Make-lang.in (utils2.o): Add $(FLAGS_H). |
| |
| 2010-10-25 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/utils.c (update_pointer_to): Clear TYPE_POINTER_TO and |
| TYPE_REFERENCE_TO of the old type after redirecting its pointer and |
| reference types. |
| |
| 2010-10-25 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (gnat_to_gnu_entity) <E_Array_Type>: Do not set |
| TREE_THIS_NOTRAP on the INDIRECT_REF node built for the template. |
| |
| 2010-10-25 Jose Ruiz <ruiz@adacore.com> |
| |
| * gcc-interface/Makefile.in (LIBGNAT_TARGET_PAIRS for powerpc-linux): |
| Reorganize target pairs so that it works on linux and ElinOS. |
| |
| 2010-10-25 Pascal Obry <obry@adacore.com> |
| |
| * adaint.c (__gnat_file_time_name_attr): Use GetFileAttributesEx to get |
| the timestamp. A bit faster than opening/closing the file. |
| (__gnat_stat_to_attr): Remove kludge for Windows. |
| (__gnat_file_exists_attr): Likewise. |
| The timestamp is now retreived using GetFileAttributesEx as faster. |
| |
| 2010-10-25 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch3.adb (Derive_Interface_Subprogram): New subprogram. |
| (Derive_Subprograms): For abstract private types transfer to the full |
| view entities of uncovered interface primitives. Required because if |
| the interface primitives are left in the private part of the package |
| they will be decorated as hidden when the analysis of the enclosing |
| package completes (and hence the interface primitive is not visible |
| for dispatching calls). |
| |
| 2010-10-25 Matthew Heaney <heaney@adacore.com> |
| |
| * Makefile.rtl, impunit.adb: Added bounded set and bounded map |
| containers. |
| * a-crbltr.ads: Added declaration of generic package for bounded tree |
| types. |
| * a-rbtgbo.ads, a-rbtgbo.adb, a-rbtgbk.ads, a-rbtgbk.adb, a-btgbso.ads, |
| a-btgbso.adb, a-cborse.ads, a-cborse.adb, a-cborma.ads, a-cborma.adb: |
| New. |
| |
| 2010-10-25 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_util.adb: Minor reformatting. |
| * usage.adb: Fix usage line for -gnatwh. |
| |
| 2010-10-25 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_ch12.adb (Analyze_Package_Instantiation): For an |
| instantiation in an RCI spec, omit package body if instantiation comes |
| from source, even as a nested |
| package. |
| * exp_dist.adb (Add_Calling_Stubs_To_Declarations, |
| *_Support.Add_Receiving_Stubs_To_Declarations): Handle the case of |
| nested packages, package instantiations and subprogram instantiations. |
| |
| 2010-10-25 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch5.adb (Expand_Predicated_Loop): Remove code for loop through |
| non-static predicate, since we agree not to allow this. |
| (Expand_Predicated_Loop): Properlay handle false predicate (null |
| list in Static_Predicate field. |
| * sem_ch13.adb (Build_Static_Predicate): Extensive changes to clean up |
| handling of more general predicate forms. |
| |
| 2010-10-25 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch4.adb, sem_util.adb: Minor reformatting. |
| * sem_ch8.adb (Find_Selected_Component): Allow selection from instance |
| of type in predicate or invariant expression. |
| |
| 2010-10-25 Pascal Obry <obry@adacore.com> |
| |
| * adaint.c (__gnat_stat_to_attr): Can set the timestamp on Windows now. |
| (f2t): New routine. |
| (__gnat_stat): Rewrite Win32 version. |
| |
| 2010-10-25 Robert Dewar <dewar@adacore.com> |
| |
| * sem_warn.adb, einfo.ads, exp_ch4.adb: Minor comment fix |
| * sem_case.adb: Comment clarification for loops through false |
| predicates. |
| * sem_util.adb: Minor reformatting |
| (Check_Order_Dependence): Fix bad double blank in error message |
| |
| 2010-10-25 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch4.adb (Analyze_Membership_Op): in Ada_2012 a membership |
| operation can have a single alternative that is a value of the type. |
| Rewrite operation as an equality test. |
| |
| 2010-10-25 Matthew Heaney <heaney@adacore.com> |
| |
| * Makefile.rtl, impunit.adb: Added a-cobove (bounded vector container) |
| to lists. |
| * a-contai.ads: Added declaration of Capacity_Error exception. |
| * a-cobove.ads, a-cobove.adb: New files. |
| |
| 2010-10-25 Thomas Quinot <quinot@adacore.com> |
| |
| * uname.adb: Revert previous change, no longer needed after change |
| in par-ch10.adb. |
| |
| 2010-10-25 Thomas Quinot <quinot@adacore.com> |
| |
| * scos.ads: Minor comment fix. |
| |
| 2010-10-25 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch5.adb (Analyze_Assignment_Statement): Check dangerous order |
| dependence. |
| * sem_ch6.adb (Analyze_Procedure_Call_Statement): Ditto. |
| * sem_res.adb (Analyze_Actuals): Add actual to list of actuals for |
| current construct, for subsequent order dependence checking. |
| (Resolve): Check order dependence on expressions that are not |
| subexpressions. |
| * sem_util.adb (Check_Order_Dependence): Code cleanup, to correspond |
| to latest version of AI05-144-2. |
| * sem_warn.adb (Warn_On_Overlapping_Actuals): Code cleanup. |
| |
| 2010-10-25 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch13.adb (Build_Static_Predicate): Moved out of |
| Build_Predicate_Function. |
| (Build_Static_Predicate): Complet rewrite for more general predicates |
| |
| 2010-10-25 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> |
| Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (gnat_to_gnu_entity, case E_Function): Allow |
| In Out/Out parameters for functions. |
| * gcc-interface/trans.c (gnu_return_var_stack): New variable. |
| (create_init_temporary): New static function. |
| (Subprogram_Body_to_gnu): Handle In Out/Out parameters for functions. |
| (call_to_gnu): Likewise. Use create_init_temporary in order to create |
| temporaries for unaligned parameters and return value. If there is an |
| unaligned In Out or Out parameter passed by reference, push a binding |
| level if not already done. If a binding level has been pushed and the |
| call is returning a value, create the call statement. |
| (gnat_to_gnu) <N_Return_Statement>: Handle In Out/Out parameters for |
| functions. |
| |
| 2010-10-22 Ben Brosgol <brosgol@adacore.com> |
| |
| * gnat_rm.texi: Add chapter on Ada 2012 support. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch12.adb: Minor reformatting. |
| |
| 2010-10-22 Thomas Quinot <quinot@adacore.com> |
| |
| * exp_dist.adb: Mark missing case of nested package when expanding |
| stubs. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * par-ch10.adb: Discard incomplete with_clause. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * checks.adb (Enable_Range_Check): Remove code suppressing range check |
| if static predicate present, not needed. |
| * exp_attr.adb (Expand_Pred_Succ): Check Suppress_Assignment_Checks flag |
| * exp_ch3.adb (Expand_N_Object_Declaration): Check |
| Suppress_Assignment_Checks flag. |
| * exp_ch4.adb (Expand_N_In): Make some corrections for proper handling |
| of ranges when predicates are present. |
| * exp_ch5.adb (Expand_Predicated_Loop): New procedure |
| (Expand_N_Assignment_Statement): Check Suppress_Assignment_Checks flag |
| (Expand_N_Loop_Statement): Handle loops over predicated types |
| * sem_case.adb (Analyze_Choices): Remove extra blank in error message. |
| * sem_ch13.adb (Build_Predicate_Function.Add_Call): Suppress info |
| message for inheritance if within a generic instance, not useful there! |
| (Build_Static_Predicate): Optimize test in predicate function |
| based on static ranges determined. |
| * sem_ch5.adb (Analyze_Iteration_Scheme): Error for loop through |
| subtype with non-static predicate. |
| * sinfo.ads, sinfo.adb (Suppress_Assignment_Checks): New flag. |
| |
| 2010-10-22 Thomas Quinot <quinot@adacore.com> |
| |
| * uname.adb (Get_Unit_Name.Add_Node_Name): If encountering an error |
| node in the unit name, propagate Program_Error to guard against |
| cascaded errors. |
| |
| 2010-10-22 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch8.adb (Find_Selected_Component): Do not generate a subtype for |
| selected components of dispatch table wrappers. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch9.adb (Make_Initialize_Protection): A protected type that |
| implements an interface must be treated as if it has entries, to |
| support dispatching select statements. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sem_aggr.adb, sem_ch3.adb: Minor reformatting. |
| |
| 2010-10-22 Javier Miranda <miranda@adacore.com> |
| |
| * sem_aggr.adb (Resolve_Array_Aggregate.Add): If the type of the |
| aggregate has a non standard representation the attributes 'Val and |
| 'Pos expand into function calls and the resulting expression is |
| considered non-safe for reevaluation by the backend. Relocate it into |
| a constant temporary to indicate to the backend that it is side |
| effects free. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch3.adb (Build_Concurrent_Derived_Type): Create declaration for |
| derived corresponding record type only when expansion is enabled. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sem_case.adb, sem_attr.adb (Bad_Predicated_Subtype_Use): Change order |
| of parameters. |
| * sem_ch13.adb (Build_Predicate_Function): Don't give inheritance |
| messages for generic actual subtypes. |
| * sem_ch9.adb, sem_res.adb, sem_util.adb, sem_util.ads, sem_ch3.adb |
| (Bad_Predicated_Subtype_Use): Use this procedure. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch5.adb: Minor reformatting. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * a-except-2005.adb (Rmsg_18): New message text. |
| * a-except.adb (Rmsg_18): New message text. |
| * atree.adb (List25): New function |
| (Set_List25): New procedure |
| * atree.ads (List25): New function |
| (Set_List25): New procedure |
| * einfo.adb (Static_Predicate): Is now a list |
| (OK_To_Reference): Present in all entities |
| * einfo.ads (Static_Predicate): Is now a list |
| (OK_To_Reference): Applies to all entities |
| * exp_ch13.adb (Build_Predicate_Function): Moved to Sem_Ch13 |
| * sem_attr.adb (Bad_Attribute_For_Predicate): Call |
| Bad_Predicated_Subtype_Use. |
| * sem_case.ads, sem_case.adb: Major surgery to deal with predicated |
| subtype case. |
| * sem_ch13.adb (Build_Predicate_Function): Moved from Exp_Ch13 to |
| Sem_Ch13. |
| (Build_Static_Predicate): New procedure handles static predicates. |
| * sem_ch3.adb (Analyze_Subtype_Declaration): Delay freeze on subtype |
| with no constraint if ancestor subtype has predicates. |
| (Analyze_Variant_Part): New calling sequence for Analyze_Choices |
| * sem_ch4.adb (Junk_Operand): Don't complain about OK_To_Reference |
| entity. |
| (Analyze_Case_Expression): New calling sequence for Analyze_Choices |
| * sem_ch5.adb (Analyze_Case_Statement): New calling sequence for |
| Analyze_Choices. |
| * sem_util.ads, sem_util.adb (Bad_Predicated_Subtype_Use): New procedure |
| * types.ads (PE_Bad_Predicated_Generic_Type): Replaces |
| PE_Bad_Attribute_For_Predicate. |
| * atree.h: Add definition of List25. |
| |
| 2010-10-22 Jerome Lambourg <lambourg@adacore.com> |
| |
| * gnatlink.adb (Process_Binder_File): Remove CLI-specific code, now |
| moved to dotnet-ld. |
| (Gnatlink): Remove CLI-specific code, moved to dotnet-ld |
| * bindgen.adb (Gen_Object_Files_Options): Do not issue -L switches with |
| the .NET compiler, useless and unsupported. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sem_util.ads (Get_Num_Lit_From_Pos): Fix errors in documentation, |
| this returns a Node_Id for a reference to the entity, not the entity |
| itself! |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch5.adb (Analyze_Iteration_Scheme): use Insert_Actions when |
| bounds require a temporary. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch4.adb: Minor reformatting. |
| * sinfo.ads: Minor comment fixes for Ada 2012 syntax. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch5.adb: Minor reformatting. |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * a-except.adb, a-except-2005.adb: Add new Rcheck entry. |
| * exp_ch13.adb (Add_Call): Make sure subtype is marked with |
| Has_Predicates set to True if it inherits predicates. |
| * sem_attr.adb: Handle 'First/'Last/'Range for predicated types |
| * types.ads (PE_Bad_Attribute_For_Predicate): New reason code |
| * types.h: Add new Rcheck entry. |
| * einfo.ads, einfo.adb (Static_Predicate): New field. |
| Minor code reorganization (file float routines in proper section) |
| Fix bad field name in comments. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sem_eval.adb (Subtypes_Statically_Compatible): Check null exclusion |
| case. |
| |
| 2010-10-22 Vincent Celier <celier@adacore.com> |
| |
| * prj-conf.adb (Get_Config_Switches): Detect if there is at least one |
| declaration of IDE'Compiler_Command for one of the language in the main |
| project. |
| (Do_Autoconf): If there were at least one Compiler_Command declared and |
| no target, invoke gprconfig with --target=all instead of the normalized |
| host name. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch4.adb: Update syntax in comments for Ada 2012. |
| * sinfo.ads: Update syntax in comments for Ada 2012 |
| * par-ch3.adb (Check_Restricted_Expression): Remove "in Ada 2012 mode" |
| from msg. |
| |
| 2010-10-22 Gary Dismukes <dismukes@adacore.com> |
| |
| * sem_ch3.adb (Check_Or_Process_Discriminants): In Ada 2012, allow |
| limited tagged types to have defaulted discriminants. Customize the |
| error message for the Ada 2012 case. |
| (Process_Discriminants): In Ada 2012, allow limited tagged types to have |
| defaulted discriminants. Customize the error message for the Ada 2012 |
| case. |
| * sem_ch6.adb (Create_Extra_Formals): Suppress creation of the extra |
| formal for out formals of discriminated types in the case where the |
| underlying type is a limited tagged type. |
| * exp_attr.adb (Expand_N_Attribute_Reference, case |
| Attribute_Constrained): Return True for 'Constrained when the |
| underlying type of the prefix is a limited tagged type. |
| |
| 2010-10-22 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_ch3.adb (Complete_Private_Subtype): The full view of the subtype |
| may already have a rep item chain inherited from the full view of the |
| base type, so do not overwrite it when propagating rep items from the |
| partial view of the subtype. |
| * sem_ch3.adb: Minor code reorganization. Minor reformatting. |
| |
| 2010-10-22 Sergey Rybin <rybin@adacore.com> |
| |
| * gnat_ugn.texi (gnatmetric): Remove description of debug option. |
| |
| 2010-10-22 Tristan Gingold <gingold@adacore.com> |
| |
| * adaint.c (__gnat_number_of_cpus): Add implementation for VMS. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * par-ch5.adb: Set properly starting sloc of loop parameter. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_util.adb (May_Be_Lvalue): An actual in a function call can be an |
| lvalue in Ada2012, if the function has in-out parameters. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * cstand.adb, einfo.adb, exp_attr.adb, sem_prag.adb, sem_vfpt.adb, |
| sem_ch10.adb: Minor reformatting. |
| |
| 2010-10-22 Sergey Rybin <rybin@adacore.com> |
| |
| * gnat_ugn.texi: Remove most of the content of gnatcheck chapter. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_attr.adb: Handle indexed P'old. |
| |
| 2010-10-22 Geert Bosch <bosch@adacore.com> |
| |
| * cstand.adb (Build_Float_Type): Set Float_Rep according to platform. |
| * einfo.ads (Float_Rep): New attribute. |
| (Float_Rep_Kind): Move from body. Add comments. |
| * einfo.adb (Float_Rep_Kind): Move to spec |
| (Float_Rep): Now a real field instead of local function. |
| (Set_Float_Rep): New procedure to set floating point representation |
| (Set_Vax_Float): Remove. |
| (Write_Entity_Flags): Remove Vax_Float flag. |
| (Write_Field10_Name): Add E_Floating_Point_Type case for Float_Rep. |
| * exp_attr.adb (Attribute_Valid): Use case statement for representation |
| specific processing. |
| * sem_ch3.adb (Build_Derived_Numeric_Type, |
| Floating_Point_Type_Declaration): Set Float_Rep instead of Vax_Float |
| attribute. |
| * sem_util.ads, sem_util.adb (Is_AAMP_Float): Remove. |
| * sem_vfpt.adb (Set_D_Float, Set_F_Float, Set_G_Float, Set_IEEE_Long, |
| Set_IEEE_Short): Set Float_Rep instead of Vax_Float attribute. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sprint.adb: Minor reformatting. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch3.adb (Expand_N_Object_Declaration): Do required predicate |
| checks. |
| * sem_ch3.adb (Complete_Private_Subtype): Propagate predicates to full |
| view. |
| * sem_ch6.adb (Invariants_Or_Predicates_Present): New name for |
| Invariants_Present. |
| (Process_PPCs): Handle predicates generating post conditions |
| * sem_util.adb (Is_Partially_Initialized_Type): Add |
| Include_Null parameter. |
| * sem_util.ads (Is_Partially_Initialized_Type): Add |
| Include_Null parameter. |
| |
| 2010-10-22 Sergey Rybin <rybin@adacore.com> |
| |
| * gnat_ugn.texi (gnatelim): Add description for '--ignore' option |
| |
| 2010-10-22 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_prag.adb (Check_First_Subtype): Specialize error messages for |
| case where argument is not a type. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch5.adb, par-ch4.adb, par-ch5.adb, sem_ch5.adb, sinfo.ads: Minor |
| reformatting. |
| |
| 2010-10-22 Arnaud Charlet <charlet@adacore.com> |
| |
| * a-locale.adb: Minor code clean up. |
| |
| 2010-10-22 Thomas Quinot <quinot@adacore.com> |
| |
| * exp_ch4.adb: Minor code reorganization and factoring. |
| |
| 2010-10-22 Thomas Quinot <quinot@adacore.com> |
| |
| * exp_ch5.adb, sem_ch5.adb, sinfo.ads, snames.ads-tmpl, par-ch5.adb: |
| Minor reformatting. |
| |
| 2010-10-22 Geert Bosch <bosch@adacore.com> |
| |
| * stand.ads: Fix typo in comment. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch6.adb: Enable in-out parameter for functions. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch4.adb (Analyze_Quantified_Expression): Handle properly loop |
| iterators that are transformed into container iterators after analysis. |
| * exp_ch4.adb (Expand_N_Quantified_Expression): Handle properly both |
| iterator forms before rewriting as a loop. |
| |
| 2010-10-22 Brett Porter <porter@adacore.com> |
| |
| * a-locale.adb, a-locale.ads, locales.c: New files. |
| * Makefile.rtl: Add a-locale |
| * gcc-interface/Makefile.in: Add locales.c |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sem_util.ads, sem_util.adb, sem_aux.ads, sem_aux.adb |
| (Is_Generic_Formal): Moved from Sem_Util to Sem_Aux. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch5.adb (Expand_Iterator_Loop): New subprogram, implements new |
| iterator forms over arrays and containers, in loops and quantified |
| expressions. |
| * exp_util.adb (Insert_Actions): include N_Iterator_Specification. |
| * par-ch4.adb (P_Quantified_Expression): Handle iterator specifications. |
| * par-ch5.adb (P_Iterator_Specification): New subprogram. Modify |
| P_Iteration_Scheme to handle both loop forms. |
| * sem.adb: Handle N_Iterator_Specification. |
| * sem_ch5.adb, sem_ch5.ads (Analyze_Iterator_Specification): New |
| subprogram. |
| * sinfo.adb, sinfo.ads: New node N_Iterator_Specification. |
| N_Iteration_Scheme can now include an Iterator_Specification. Ditto |
| for N_Quantified_Expression. |
| * snames.ads-tmpl: Add names Cursor, Element, Element_Type, No_Element, |
| and Previous, to support iterators over predefined containers. |
| * sprint.adb: Handle N_Iterator_Specification. |
| |
| 2010-10-22 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_prag.adb, sem_ch12.adb, sem_util.adb, sem_util.ads |
| (Is_Generic_Formal): Move from body of Sem_Ch12 to Sem_Util. |
| (Check_Arg_Is_Local_Name): Fix check in the case of a pragma appearing |
| immediately after a library unit. |
| (Analyze_Pragma, case Preelaborable_Initialization): Pragma may apply to |
| a formal derived type. |
| |
| 2010-10-22 Geert Bosch <bosch@adacore.com> |
| |
| * gcc-interface/Make-lang.in: Remove ttypef.ads |
| * checks.adb: Use Machine_Mantissa_Value and Machine_Radix_Value instead |
| of Machine_Mantissa and Machine_Radix. |
| * cstand.adb (P_Float_Range): Directly print the Type_Low_Bound and |
| Type_High_Bound of the type, instead of choosing constants from Ttypef. |
| (Set_Float_Bounds): Compute the bounds based on Machine_Radix_Value, |
| Machine_Emax_Value and Machine_Mantissa_Value instead of special-casing |
| each type. |
| * einfo.ads (Machine_Emax_Value, Machine_Emin_Value, |
| Machine_Mantissa_Value, Machine_Radix_Value, Model_Emin_Value, |
| Model_Epsilon_Value, Model_Mantissa_Value, Model_Small_Value, |
| Safe_Emax_Value, Safe_First_Value, Safe_Last_Value): Add new |
| synthesized floating point attributes. |
| * einfo.adb (Float_Rep): Determine the kind of floating point |
| representation used for a given type. |
| (Machine_Emax_Value, Machine_Emin_Value, Machine_Mantissa_Value, |
| Machine_Radix_Value): Implement based on Float_Rep_Kind of a type and |
| the number of digits in the type. |
| (Model_Emin_Value, Model_Epsilon_Value, Model_Mantissa_Value, |
| Model_Small_Value, Safe_Emax_Value, Safe_First_Value, Safe_Last_Value): |
| Implement new synthesized floating point attributes based on the various |
| machine attributes. |
| * eval_fat.ads: Remove Machine_Mantissa and Machine_Radix. |
| * eval_fat.adb (Machine_Mantissa, Machine_Radix): Remove. Use the |
| Machine_Mantissa_Value and Machine_Radix_Value functions instead. |
| * exp_vfpt.adb (VAXFF_Digits, VAXDF_Digits, VAXFG_Digits): Define local |
| constants, instead of using constants from Ttypef. |
| * gnat_rm.texi: Reword comments referencing Ttypef. |
| * sem_attr.ads: Reword comment referencing Ttypef. |
| * sem_attr.adb (Float_Attribute_Universal_Integer, |
| Float_Attribute_Universal_Real): Remove. |
| (Attribute_Machine_Emax, Attribute_Machine_Emin, |
| Attribute_Machine_Mantissa, Attribute_Model_Epsilon, |
| Attribute_Model_Mantissa, Attribute_Model_Small, Attribute_Safe_Emax, |
| Attribute_Safe_First, Attribute_Safe_Last, Model_Small_Value): Use |
| attributes in Einfo instead of Float_Attribute_Universal_Real and |
| Float_Attribute_Universal_Integer and all explicit constants. |
| * sem_util.ads, sem_util.adb (Real_Convert): Remove. |
| * sem_vfpt.adb (VAXDF_Digits, VAXFF_Digits, VAXGF_Digits, IEEEL_Digits, |
| IEEES_Digits): New local constants, in order to remove dependency on |
| Ttypef. |
| * tbuild.ads (Make_Float_Literal): New function. |
| * tbuild.adb (Make_Float_Literal): New function to create a new |
| N_Real_Literal, constructing it as simple as possible for best |
| output of constants in -gnatS. |
| * ttypef.ads: Remove. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * checks.adb (Apply_Predicate_Check): Remove attempt at optimization |
| when subtype is the same, caused legitimate checks to be missed. |
| * exp_ch13.adb (Build_Predicate_Function): Use Nearest_Ancestor to get |
| inheritance from right entity. |
| * freeze.adb (Freeze_Entity): Use Nearest_Ancestor to freeze in the |
| derived type case if the ancestor type has predicates. |
| * sem_aux.ads, sem_aux.adb (Nearest_Ancestor): New function. |
| * sem_prag.adb (Check_Enabled): Minor code reorganization. |
| |
| 2010-10-22 Arnaud Charlet <charlet@adacore.com> |
| |
| * gcc-interface/utils.c, gcc-interface/gigi.h: Minor reformatting. |
| |
| 2010-10-22 Thomas Quinot <quinot@adacore.com> |
| |
| * einfo.ads (Declaration_Node): Clarify documentation, in particular |
| regarding what is returned for subprogram entities. |
| |
| 2010-10-22 Arnaud Charlet <charlet@adacore.com> |
| |
| * exp_attr.adb (Make_Range_Test): Generate a Range node instead of |
| explicit comparisons, generates simpler expanded code. |
| * a-except-2005.adb (Rcheck_06_Ext): New. |
| * gcc-interface/trans.c (gigi, gnat_to_gnu): Handle validity checks |
| like range checks. |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch3.adb (Array_Type_Declaration): Error for subtype wi predicate |
| for index type |
| (Constrain_Index): Error of subtype wi predicate in index constraint |
| * sem_ch9.adb (Analyze_Entry_Declaration): Error of subtype wi |
| predicate in entry family. |
| * sem_res.adb (Resolve_Slice): Error of type wi predicate in slice. |
| |
| 2010-10-22 Javier Miranda <miranda@adacore.com> |
| |
| * sem_util.ads, sem_util.adb (Collect_Parents): New subprogram. |
| (Original_Corresponding_Operation): New subprogram. |
| (Visible_Ancestors): New subprogram. |
| * sem_ch6.adb (New_Overloaded_Entity): Handle new case of dispatching |
| operation that overrides a hidden inherited primitive. |
| * sem_disp.adb (Find_Hidden_Overridden_Primitive): New subprogram. |
| (Check_Dispatching_Operation): if the new dispatching operation |
| does not override a visible primtive then check if it overrides |
| some hidden inherited primitive. |
| |
| 2010-10-22 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch10.adb (Analyze_With_Clause): If the parent_unit_name in a with |
| clause is a child unit that denotes a renaming, replace the |
| parent_unit_name with a reference to the renamed unit, because the |
| prefix is irrelevant to subsequent visibility.. |
| |
| 2010-10-22 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads, einfo.adb (Has_Predicates): Flag is now on all entities |
| (simplifies code). |
| * exp_ch13.adb (Build_Predicate_Function): Output info msgs for |
| inheritance. |
| * sem_ch13.adb (Analyze_Aspect_Specifications): Make sure we have a |
| freeze node for entities for which a predicate is specified. |
| (Analyze_Aspect_Specifications): Avoid duplicate calls |
| * sem_ch3.adb (Analyze_Full_Type_Declaration): Remove attempt to avoid |
| duplicate calls to Analye_Aspect_Specifications. |
| |
| 2010-10-22 Thomas Quinot <quinot@adacore.com> |
| |
| * a-exextr.adb, atree.ads, freeze.adb: Minor reformatting. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch3.adb: Minor reformatting. |
| |
| 2010-10-21 Thomas Quinot <quinot@adacore.com> |
| |
| * einfo.ads (Next_Girder_Discriminant): Remove obsolete description for |
| removed routine. |
| |
| 2010-10-21 Nicolas Roche <roche@adacore.com> |
| |
| * gnatmem.adb, memroot.adb, memroot.ads, gmem.c, |
| gcc-interface/Makefile.in: Remove gnatmem specific files. |
| |
| 2010-10-21 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_res.adb, exp_ch13.adb: Minor reformatting. |
| |
| 2010-10-21 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_ch3.adb (Check_Or_Process_Discriminant): Reject illegal attempt |
| to provide a tagged full view as the completion of an untagged partial |
| view if the partial view has a discriminant with default. |
| |
| 2010-10-21 Arnaud Charlet <charlet@adacore.com> |
| |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * checks.ads, checks.adb (Apply_Predicate_Check): New procedure |
| Minor code reorganization. |
| * einfo.adb (Has_Predicates): Fix assertion. |
| * exp_ch13.adb (Build_Predicate_Function): Move from Sem_Ch13 spec to |
| Exp_Ch13 body. |
| (Expand_N_Freeze_Entity): Call build predicate function. |
| * exp_ch4.adb (Expand_N_Type_Conversion): Add predicate check. |
| * exp_ch5.adb (Expand_N_Assignment_Statement): Add predicate check. |
| * exp_prag.adb (Expand_Pragma_Check): Use all lower case for name of |
| check. |
| * freeze.adb (Freeze_Entity): Move building of predicate function to |
| Exp_Ch13. |
| * sem_ch13.adb (Build_Predicate_Function): Move from Sem_Ch13 to |
| Exp_Ch13. |
| * sem_ch13.ads (Build_Predicate_Function): Move from Sem_Ch13 to |
| Exp_Ch13. |
| * sem_ch3.adb (Analyze_Declarations): Remove call to build predicate |
| function. |
| * sem_res.adb (Resolve_Actuals): Apply predicate check. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads, einfo.adb: Replace Predicate_Procedure by |
| Predicate_Functions. |
| * exp_ch4.adb (Expand_N_In): Handle predicates. |
| * exp_util.ads, exp_util.adb (Make_Predicate_Call): New function. |
| (Make_Predicate_Check): New function. |
| * freeze.adb (Freee_Entity): Build predicate function if needed. |
| * sem_ch13.adb (Build_Predicate_Function): New procedure. |
| (Analyze_Aspect_Specifications): No third argument for Predicate pragma |
| built from Predicate aspect. |
| * sem_ch13.ads (Build_Predicate_Function): New procedure. |
| * sem_ch3.adb: Add handling for predicates. |
| * sem_eval.adb (Eval_Membership_Op): Never static if predicate |
| functions around. |
| * sem_prag.adb (Analye_Pragma, case Predicate): Does not take a third |
| argument. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads, einfo.adb: Add handling of predicates. |
| Rework handling of invariants. |
| * exp_ch3.adb, exp_ch4.adb, exp_util.adb, sem_ch6.adb: Minor changes to |
| handing of invariants. |
| * par-prag.adb: Add dummy entry for pragma Predicate |
| * sem_ch13.adb (Analyze_Aspect_Specifications): Add processing for |
| Predicate aspects. |
| * sem_prag.adb: Add implementation of pragma Predicate. |
| * snames.ads-tmpl: Add entries for pragma Predicate. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * elists.adb: Minor reformatting. |
| |
| 2010-10-21 Geert Bosch <bosch@adacore.com> |
| |
| * urealp.adb (UR_Write): Write hexadecimal constants with exponent 1 as |
| decimal constants, and write any others using the exponent notation. |
| Minor reformatting throughout |
| (Store_Ureal_Normalized): New function (minor code reorganization) |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads, xeinfo.adb: Minor reformatting. |
| * s-stalib.ads: Minor comment fixes. |
| |
| 2010-10-21 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch6.adb (Enter_Overloaded_Entity): Refine warning message about |
| hiding, to remove noise warnings about hiding predefined operators. |
| |
| 2010-10-21 Emmanuel Briot <briot@adacore.com> |
| |
| * g-comlin.adb (Add_Switch): Fix handling of switches with no separator |
| when the parameter has length 1. |
| |
| 2010-10-21 Jose Ruiz <ruiz@adacore.com> |
| |
| * sem_prag.adb (Set_Ravenscar_Profile): Enforce the restrictions of no |
| dependence on Ada.Execution_Time.Timers, |
| Ada.Execution_Time.Group_Budget, and |
| System.Multiprocessors.Dispatching_Domains which are part of the |
| Ravenscar Profile. |
| * impunit.adb (Non_Imp_File_Names_05): Add the file "a-etgrbu" to the |
| list of Ada 2005 files for package Ada.Execution_Time.Group_Budgets. |
| (Non_Imp_File_Names_12): Add the file "s-mudido" to the list of Ada 2012 |
| files for package System.Mutiprocessors.Dispatching_Domains. |
| |
| 2010-10-21 Tristan Gingold <gingold@adacore.com> |
| |
| * ug_words, vms_data.ads: Define the VMS qualifier for -gnateE. |
| |
| 2010-10-21 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_ch3.ads (Process_Discriminants): Clarify cases where this is |
| called for a completion. |
| |
| 2010-10-21 Geert Bosch <bosch@adacore.com> |
| |
| * uintp.ads: Expand image buffer to have enough room for 128-bit values |
| * urealp.ads (UR_Write): Write constants in base 16 in hexadecimal |
| notation; either as fixed point literal or in canonical radix 16 |
| floating point form. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * a-cgaaso.ads, a-tags.ads, exp_ch3.adb, exp_attr.adb, exp_ch4.adb, |
| exp_ch3.ads, exp_ch7.adb, exp_ch9.adb, exp_disp.adb, exp_disp.ads, |
| exp_dist.adb, exp_util.adb, layout.adb, lib-xref.adb, lib.ads, |
| prep.adb, prj-strt.adb, s-ststop.adb, s-taskin.ads, s-tataat.ads, |
| sem_aggr.adb, sem_attr.adb, sem_ch12.adb, sem_ch3.adb, sem_ch4.adb, |
| sem_ch4.ads, sem_ch5.adb, sem_res.adb, sem_util.adb, einfo.adb, |
| g-sothco.ads, make.adb: Minor reformatting |
| |
| 2010-10-21 Vincent Celier <celier@adacore.com> |
| |
| * vms_data.ads: Add new qualifiers /SRC_INFO= and |
| /UNCHECKED_SHARED_LIB_IMPORTS for GNAT COMPILE. |
| Correct qualifier /SRC_INFO= for GNAT MAKE |
| |
| 2010-10-21 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_aggr.adb (Flatten): An association for a subtype may be an |
| expanded name. |
| (Safe_Left_Hand_Side): An unchecked conversion is part of a safe |
| left-hand side if the expression is. |
| (Is_Safe_Index): new predicate |
| * exp_ch3.adb (Expand_Freeze_Enumeration_Type): Indicate that the |
| generated Rep_To_Pos function is a Pure_Function. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * gnat_rm.texi: Document Invariant pragma. |
| |
| 2010-10-21 Javier Miranda <miranda@adacore.com> |
| |
| * exp_ch5.adb: Update comment. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch13.adb (Build_Invariant_Procedure): Remove commented out code |
| for interfaces, since invariants are not allowed on interfaces in any |
| case. |
| |
| 2010-10-21 Javier Miranda <miranda@adacore.com> |
| |
| * sem_attr.adb (Resolve_Attribute): After replacing the range attribute |
| node with a range expression ensure that its evaluation will not have |
| side effects. |
| * exp_ch5.adb (Expand_Assign_Array): Propagate the Parent to the |
| unchecked conversion node generated to handle assignment of private |
| types. Required to allow climbing the subtree if Insert_Action is |
| invoked later. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch3.adb (P_Interface_Type_Definition): Allow for possibility of |
| aspect clause presence terminating the type definition. |
| |
| 2010-10-21 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch4.adb, exp_intr.adb, par-ch4.adb, scn.adb, sem_ch4.adb, |
| sem_res.adb, sem_util.adb, sinfo.ads, a-except-2005.adb: Minor |
| reformatting. |
| * snames.ads-tmpl: Add note on Name_Some (not a reserved keyword). |
| |
| 2010-10-21 Geert Bosch <bosch@adacore.com> |
| |
| * ttypef.ads: Further cleanup of Safe_XXX float attributes. |
| |
| 2010-10-19 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch4.adb, exp_ch4.ads (Expand_Quantified_Expression): New procedure |
| * exp_util.adb (Insert_Actions): Include Quantified_Expression. |
| * expander.adb: Call Expand_Qualified_Expression. |
| * par.adb: New procedure P_Quantified_Expression. Make |
| P_Loop_Parameter_Specification global for use in quantified expressions. |
| * par-ch3.adb (P_Subtype_Mark_Resync): Allow "some" as an identifier if |
| version < Ada2012. |
| * par-ch4.adb: New procedure P_Quantified_Expression. |
| * par-ch5.adb: P_Loop_Parameter_Specification is now global. |
| * scans.adb, scans.ads: Introduce token Some. For now leave as |
| unreserved. |
| * scn.adb (Scan_Reserved_Identifier): For earlier versions of Ada, |
| treat Some as a regular identifier. |
| * sem.adb: Call Analyze_Quantified_Expression. |
| * sem_ch4.adb, sem_ch4.ads: New procedure Analyze_Quantified_Expression. |
| * sem_ch5.adb, sem_ch5.ads: Analyze_Iteration_Scheme is public, for use |
| in quantified expressions. |
| * sem_res.adb: New procedure Resolve_Qualified_Expression. |
| * sinfo.adb, sinfo.ads: New node N_Quantified_Expression |
| * snames.ads-tmpl: New name Some. |
| * sprint.adb: Output quantified_expression. |
| |
| 2010-10-19 Robert Dewar <dewar@adacore.com> |
| |
| * a-exexda.adb: Minor reformatting |
| Minor code reorganization. |
| |
| 2010-10-19 Robert Dewar <dewar@adacore.com> |
| |
| * sem_eval.adb: Minor reformatting. |
| |
| 2010-10-19 Tristan Gingold <gingold@adacore.com> |
| |
| * exp_ch4.adb (Expand_N_And_Op, Expand_N_Or_Op, Expand_N_Xor_Op): Call |
| Expand_Intrinsic_Call if the function is intrinsic. |
| * exp_intr_adb (Expand_Binary_Operator): Handle VMS case for logical |
| binary operator on the unsigned_quadword record. |
| * exp_intr.ads (Expand_Intrinsic_Call): Update comments. |
| |
| 2010-10-19 Geert Bosch <bosch@adacore.com> |
| |
| * gnat_rm.texi (pragma Float_Representation): Fix typo. |
| |
| 2010-10-19 Arnaud Charlet <charlet@adacore.com> |
| |
| * switch-c.adb (Scan_Front_End_Switches): Add handling of -gnateE. |
| * fe.h (Exception_Extra_Info): Declare. |
| * usage.adb (usage): Add -gnateE doc. |
| * checks.adb (Install_Null_Excluding_Check): Use better sloc. |
| * sem_util.adb (Insert_Explicit_Dereference): Ditto. |
| * gnat_ugn.texi: Document -gnateE switch. |
| * a-except.adb (Set_Exception_C_Msg): New parameter Column. |
| * a-except-2005.adb (Set_Exception_C_Msg): New parameter Column. |
| (Raise_Constraint_Error_Msg): Ditto. |
| (Image): New helper function. |
| (Rcheck_00_Ext, Rcheck_05_Ext, Rcheck_12_Ext): New procedure with more |
| detailed exception information. |
| Adjust calls to Set_Exception_C_Msg and Raise_Constraint_Error_Msg. |
| * a-exexda.adb (Set_Exception_C_Msg): New parameter Column. |
| * opt.ads (Exception_Extra_Info): New flag. |
| * gcc-interface/utils.c (gnat_raise_decls_ext): New. |
| * gcc-interface/utils2.c (build_call_raise_range, |
| build_call_raise_column): New functions. |
| * gcc-interface/gigi.h (exception_info_kind, gnat_raise_decls_ext, |
| build_call_raise_range, build_call_raise_column): Declare. |
| gcc-interface/trans.c (build_raise_check): New function. |
| (gigi): Initialize gnat_raise_decls_ext. |
| (gnat_to_gnu): Add initial support for -gnateE switch. |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-19 Geert Bosch <bosch@adacore.com> |
| |
| * ttypef.ads: Change VAXDF_Last to be -VAXDF_First, as type is |
| symmetric. |
| |
| 2010-10-19 Robert Dewar <dewar@adacore.com> |
| |
| * atree.h (Field29): Fix incorrect definition. |
| * einfo.adb (Invariant_Procedure): New attribute |
| (Has_Invariants): New flag |
| (Has_Inheritable_Invariants): New flag |
| (OK_To_Reference): New flag |
| Minor code reorganization (use Next_Rep_Item function) |
| * einfo.ads (Invariant_Procedure): New attribute |
| (Has_Invariants): New flag |
| (Has_Inheritable_Invariants): New flag |
| (OK_To_Reference): New flag |
| * exp_ch3.adb (Expand_N_Object_Declaration): Add check for invariant |
| * exp_ch4.adb (Expand_N_Type_Conversion): Check invariant on type |
| conversion. Minor reformatting. |
| * exp_util.ads, exp_util.adb (Make_Invariant_Call): New procedure. |
| * opt.ads (List_Inherited_Aspects): New name for List_Inherited_Pre_Post |
| * par-prag.adb: Add dummy entry for pragma Invariant. |
| * sem_ch13.adb (Build_Invariant_Procedure): New procedure |
| (Analyze_Aspect_Specification): Add support for Invariant aspect |
| * sem_ch13.ads (Build_Invariant_Procedure): New procedure |
| * sem_ch3.adb (Build_Derived_Type): Propagate invariant information |
| (Process_Full_View): Deal with invariants, building invariant procedure |
| Minor reformatting |
| * sem_ch6.adb (Process_PPCs): Add processing of invariants |
| * sem_ch7.adb (Analyze_Package_Specification): Build invariant |
| procedures. |
| * sem_prag.adb: Implement pragma Invariant. |
| * sem_res.adb (Resolve_Entity_Name): Allow type reference if |
| OK_To_Reference set. |
| * sem_warn.adb (List_Inherited_Aspects): New name for |
| List_Inherited_Pre_Post. |
| * snames.ads-tmpl: Add entries for pragma Invariant. |
| * treepr.adb (Print_Entity_Information): Add handling of Field29. |
| * usage.adb: Warning .l/.L applies to invariant as well as pre/post. |
| |
| 2010-10-19 Javier Miranda <miranda@adacore.com> |
| |
| * par-ch4.adb: Update documentation of Ada 2012 syntax rules for |
| membership test. |
| |
| 2010-10-19 Bob Duff <duff@adacore.com> |
| |
| * sem_attr.adb (Eval_Attribute): Implement Max_Alignment_For_Allocation |
| attribute. |
| * exp_attr.adb (Expand_N_Attribute_Reference): Add |
| Attribute_Max_Alignment_For_Allocation to the case statement. |
| * snames.ads-tmpl (Name_Max_Alignment_For_Allocation, |
| Attribute_Max_Alignment_For_Allocation): New attribute name. |
| |
| 2010-10-19 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch3.adb (OK_For_Limited_Init_In_05): a call to an access to |
| parameterless function appears syntactically as an explicit dereference. |
| |
| 2010-10-19 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_ch8.adb, sem_ch12.adb, opt.ads, sem_ch6.adb, sem_res.adb, |
| i-cexten.ads, exp_disp.adb, exp_ch4.adb, exp_ch9.adb: Minor reformatting |
| |
| 2010-10-19 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_util.adb (Collect_Primitive_Operations): A function with an |
| anonymous access result designating T is a primitive operation of T. |
| |
| 2010-10-19 Tristan Gingold <gingold@adacore.com> |
| |
| * init.c: On Alpha/VMS, only adjust PC for HPARITH. |
| |
| 2010-10-19 Tristan Gingold <gingold@adacore.com> |
| |
| * sem_attr.adb (Eval_Attribute): Handle Attribute_Ref, which can be |
| evaluated on VMS. |
| |
| 2010-10-19 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch12.adb (Check_Generic_Child_Unit): Handle properly the case of |
| an instantiation of a renaming of the implicit generic child that |
| appears within an instance of its parent. |
| |
| 2010-10-19 Thomas Quinot <quinot@adacore.com> |
| |
| * exp_ch9.adb: Minor reformatting. |
| * einfo.adb, einfo.ads, atree.adb, atree.ads, exp_dist.adb, atree.h: |
| (Referenced_Object): Remove unused entity attribute. |
| (Direct_Primitive_Operations): Move to Elist10, this is set for all |
| tagged types, including synchronous ones, so can't use field15 which is |
| used as Storage_Size_Variable for task types and Entry_Bodies_Array for |
| protected types. |
| (Add_RACW_Primitive_Declarations_And_Bodies): Remove bogus guard |
| against Concurrent_Types (we must handle the case of a RACW designating |
| a class-wide private synchronous type). |
| Use Direct_Primitive_Operations, not Primitive_Operations, since we |
| really want the former. |
| |
| 2010-10-19 Bob Duff <duff@adacore.com> |
| |
| * sem_ch8.adb (Pop_Scope): Change "return;" to "raise Program_Error;". |
| |
| 2010-10-19 Javier Miranda <miranda@adacore.com> |
| |
| * exp_ch4.adb (Expand_Set_Membership.Make_Cond): Add missing support |
| for N_Range nodes. |
| |
| 2010-10-19 Thomas Quinot <quinot@adacore.com> |
| |
| * einfo.ads, atree.ads: Minor comment fixes. |
| |
| 2010-10-18 Bob Duff <duff@adacore.com> |
| |
| * sinfo.ads, sinfo.adb: Modify comment about adding fields to be more |
| correct, and to be in a more convenient order. |
| (Default_Storage_Pool): New field of N_Compilation_Unit_Aux, for |
| recording the Default_Storage_Pool for a parent library unit. |
| * einfo.ads (Etype): Document the case in which Etype can be Empty. |
| * sem_prag.adb (Pragma_Default_Storage_Pool): Analyze the new |
| Default_Storage_Pool pragma. |
| * sem.ads (Save_Default_Storage_Pool): Save area for push/pop scopes. |
| * gnat_ugn.texi: Document Default_Storage_Pool as a new configuration |
| pragma. |
| * freeze.adb (Freeze_Entity): When freezing an access type, take into |
| account any Default_Storage_Pool pragma that applies. We have to do |
| this at the freezing point, because up until that point, a Storage_Pool |
| or Storage_Size clause could occur, which should override the |
| Default_Storage_Pool. |
| * par-prag.adb: Add this pragma to the list of pragmas handled entirely |
| during semantics. |
| * sem_ch8.adb (Push_Scope, Pop_Scope): Save and restore the |
| Default_Storage_Pool information. |
| * opt.ads (Default_Pool, Default_Pool_Config): New globals for recording |
| currently-applicable Default_Storage_Pool pragmas. |
| * opt.adb: Save/restore the globals as appropriate. |
| * snames.ads-tmpl (Name_Default_Storage_Pool, |
| Pragma_Default_Storage_Pool): New pragma name. |
| |
| 2010-10-18 Vincent Celier <celier@adacore.com> |
| |
| * make.adb (Switches_Of): Put the spec and body suffix in canonical |
| case. |
| |
| 2010-10-18 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch13.adb (Analyze_Aspect_Specifications): If subprogram is at the |
| library level, the pre/postconditions must be treated as global |
| declarations, i.e. placed on the Aux_Decl nodes of the compilation unit. |
| * freeze.adb (Freeze_Expression): If the expression is at library level |
| there is no enclosing record to check. |
| |
| 2010-10-18 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch3.ads (Find_Type_Name): Add documentation. |
| * sem_ch3.adb (Analyze_Full_Type_Declaration): Code cleanup because the |
| propagation of the class-wide entity is now done by routine |
| Find_Type_Name to factorize this code. |
| (Analyze_Private_Extension_Declaration): Handle private type that |
| completes an incomplete type. |
| (Tag_Mismatch): Add error message for tag mismatch in a private type |
| declaration that completes an incomplete type. |
| (Find_Type_Name): Handle completion of incomplete type by means of |
| a private declaration. Generate an error if a tagged incomplete type |
| is completed by an untagged private type. |
| * sem_ch7.adb (New_Private_Type): Handle private type that completes an |
| incomplete type. |
| * einfo.ads (Full_View): Add documentation. |
| |
| 2010-10-18 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch12.adb (Analyze_Formal_Package_Declaration): If the package is |
| a renaming, generate a reference for it before analyzing the renamed |
| entity, to prevent spurious warnings. |
| |
| 2010-10-18 Jose Ruiz <ruiz@adacore.com> |
| |
| * adaint.c (__gnat_pthread_setaffinity_np, |
| __gnat_pthread_attr_setaffinity_np): Remove wrappers, no longer needed. |
| * s-osinte-linux.ads (pthread_setaffinity_np, |
| pthread_attr_setaffinity_np): Remove use of wrappers. |
| * s-taprop-linux.adb (Create_Task, Initialize): Restore check to verify |
| whether the affinity functionality is available in the OS. |
| * gcc-interface/utils.c: Set TREE_STATIC on functions only when there |
| are defined. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads, einfo.adb: Minor reformatting. |
| * gnat_ugn.texi, ug_words: Add missing entries, fix typos. |
| |
| 2010-10-18 Emmanuel Briot <briot@adacore.com> |
| |
| * g-comlin.adb (Is_In_Config): When the switch accepts either a space |
| or equal, we output an equal every time. |
| |
| 2010-10-18 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_res.adb (Resolve_Entry_Call): Handle call to an entry family |
| member when pre/post conditions are present. |
| * exp_ch9.adb (Build_PPC_Wrapper): The PPC_Wrapper for an entry family |
| includes an index parameter, and the name of the enclosed entry call is |
| an indexed component. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads, einfo.adb: Minor reformatting. |
| |
| 2010-10-18 Jose Ruiz <ruiz@adacore.com> |
| |
| * adaint.c (__gnat_pthread_setaffinity_np, |
| __gnat_pthread_attr_setaffinity_np): Add these wrappers which check the |
| availability of the underlying OS functionality before calling. |
| * s-osinte-linux.ads (pthread_setaffinity_np, |
| pthread_attr_setaffinity_np): Call a wrapper instead of the OS function |
| to perform a check of its availability. |
| * s-taprop-linux.adb (Create_Task): Remove the check to verify whether |
| the affinity functionality is available in the OS. Now done in a wrapper |
| * gcc-interface/Makefile.in: Remove vmshandler.asm, unused. |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * sinfo.ads, sinfo.adb: Change Has_Pragma_CPU to Flag14 (Flag10 is |
| standard field). |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * s-stausa.adb, s-taprop-linux.adb, s-taprop-mingw.adb, s-tassta.ads: |
| Minor reformatting. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * exp_strm.adb (Build_Elementary_Input_Call): Check |
| No_Default_Stream_Attributes. |
| (Build_Elementary_Write_Call): Check No_Default_Stream_Attributes |
| * s-rident.ads: Add restriction No_Default_Stream_Attributes |
| Put restriction No_Allocators_After_Elaboration in alpha order |
| |
| 2010-10-18 Jose Ruiz <ruiz@adacore.com> |
| |
| * exp_ch9.adb (Expand_N_Task_Type_Declaration): Add field corresponding |
| to the affinity when expanding the task declaration. |
| (Make_Task_Create_Call): Add the affinity parameter to the call to |
| create task. |
| * sem_prag.adb (Analyze_Pragma): Add the analysis for pragma CPU, |
| taking into account the case when it applies to a subprogram (only for |
| main and with static expression) or to a task. |
| * par_prag.adb:(Prag): Make pragma CPU a valid one. |
| * snames.ads-tmpl (Name_uCPU, Name_CPU): Add these new name identifiers |
| used by the expander for handling the affinity parameter when creating |
| a task. |
| (Pragma_Id): Add Pragma_CPU as a valid one. |
| * rtsfind.ads (RTU_Id): Make System_Multiprocessors accesible. |
| (RE_Id, RE_Unit_Table): Make the entities RE_CPU_Range and |
| RE_Unspecified_CPU visible. |
| * sinfo.ads, sinfo.adb (Has_Pragma_CPU, Set_Has_Pragma_CPU): Add these |
| two subprograms to set/get the flag indicating whether there is a |
| pragma CPU which applies to the entity. |
| * lib.ads, lib.adb (Unit_Record, Default_Main_CPU, Main_CPU, |
| Set_Main_CPU): Add the field Main_CPU to Unit_Record to store the value |
| of the affinity associated to the main subprogram (if any). |
| Default_Main_CPU is used when no affinity is set. Subprograms |
| Set_Main_CPU and Main_CPU are added to set/get the affinity of the main |
| subprogram. |
| * ali.ads, ali.adb (ALIs_Record): Add field Main_CPU to contain the |
| value of the affinity of the main subprogram. |
| (Scan_ALI): Get the affinity of the main subprogram (encoded as C=XX in |
| the M line). |
| * lib-writ.ads, lib-writ.adb (M_Parameters): Encode the affinity of the |
| main subprogram in the M (main) line using C=XX. |
| * lib-load.adb (Create_Dummy_Package_Unit, Load_Main_Source, |
| Load_Unit): Add new field Main_CPU. |
| * bindgen.adb (Gen_Adainit_Ada, Gen_Adainit_C): Add the code to pass |
| the affinity of the main subprogram to the run time. |
| * s-taskin.ads (Common_ATCB): Add the field Base_CPU to store the |
| affinity. |
| (Unspecified_CPU): Add this constant to identify the case when no |
| affinity is set for tasks. |
| * s-taskin.adb (Initialize_ATCB): Store the value coming from pragma |
| CPU in the common part of the ATCB. |
| (Initialize): Store the value coming from pragma CPU (for the |
| environment task) in the common part of the ATCB. |
| * s-tassta.ads, s-tassta.adb (Create_Task): Add the affinity specified |
| by pragma CPU to the ATCB. |
| * s-tarest.ads, s-tarest.adb (Create_Restricted_Task): Add the affinity |
| specified by pragma CPU to the ATCB. |
| * s-tporft.adb (Register_Foreign_Thread): Add the new affinity |
| parameter to the call to Initialize_ATCB. |
| * s-taprop-linux.adb (Create_Task): Change the attributes of the thread |
| to include the task affinity before creation. Additionally, the |
| affinity selected with Task_Info is also enforced changing the |
| attributes at task creation time, instead of changing it after creation. |
| (Initialize): Change the affinity of the environment task if required |
| by a pragma CPU. |
| * s-osinte-linux.ads (pthread_setaffinity_np): Instead of using a |
| wrapper to check whether the function is available or not, use a weak |
| symbol. |
| (pthread_attr_setaffinity_np): Add the import of this function which is |
| used to change the affinity in the attributes used to create a thread. |
| * adaint.c (__gnat_pthread_attr_setaffinity_np): Remove this wrapper. |
| It was used to check whether the pthread function was available or not, |
| but the use of a weak symbol handles this situation in a cleaner way. |
| * s-taprop-mingw.adb (Create_Task, Initialize): Change the affinity of |
| tasks (including the environment task) if required by a pragma CPU. |
| * s-taprop-solaris.adb (Enter_Task): Change the affinity of tasks |
| (including the environment task) if required by a pragma CPU. |
| * s-taprop-vxworks.adb (Create_Task, Initialize): Change the affinity |
| of tasks (including the environment task) if required by a pragma CPU. |
| * init.c (__gl_main_cpu): Make this value visible to the run time. It |
| will pass the affinity of the environment task. |
| |
| 2010-10-18 Javier Miranda <miranda@adacore.com> |
| |
| * einfo.adb (Direct_Primitive_Operations): Complete assertion. |
| |
| 2010-10-18 Vincent Celier <celier@adacore.com> |
| |
| * prj.ads (Source_Data): New Boolean flag In_The_Queue. |
| |
| 2010-10-18 Tristan Gingold <gingold@adacore.com> |
| |
| * s-stausa.ads: Add the Top parameter to Initialize_Analyzer. |
| * s-stausa.adb: Use the top parameter. In Fill_Stack, use the |
| stack top if known. |
| * s-tassta.adb (Task_Wrapper): Call Initialize_Analyzer after Enter_Task |
| so that Pri_Stack_Info.Limit can be set and used. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads: Minor reformatting. |
| * sem_res.adb (Resolve_Allocator): Add test for violating |
| No_Anonymous_Allocators. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * prj-nmsc.adb, prj.adb, sem_res.adb: Minor reformatting. |
| |
| 2010-10-18 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_util.adb (Insert_Explicit_Dereference): If operand is a selected |
| component, we generate a reference to the ultimate prefix when it is an |
| entity name. We must place the reference on the identifier for that |
| prefix, and not on the operand itself, to prevent spurious extra |
| references in the ali file. |
| |
| 2010-10-18 Vincent Celier <celier@adacore.com> |
| |
| * projects.texi: Add documentation for attribute Ignore_Source_Sub_Dirs |
| |
| 2010-10-18 Ed Schonberg <schonberg@adacore.com> |
| |
| * einfo.ads, einfo.adb: New attribute PPC_Wrapper for entries and entry |
| families. Denotes a procedure that performs pre/postcondition checks |
| and then performs the entry call. |
| * sem_res.adb (Resolve_Entry_Call): If the entry has |
| pre/postconditions, replace call with a call to the PPC_Wrapper of the |
| entry. |
| * exp_ch9.adb (Build_PPC_Wrapper): new procedure. |
| (Expand_N_Entry_Declaration, Expand_N_Protected_Type_Declaration): call |
| Build_PPC_Wrapper for all entries in task and protected definitions. |
| |
| 2010-10-18 Tristan Gingold <gingold@adacore.com> |
| |
| * init.c: Add __gnat_set_stack_guard_page and __gnat_set_stack_limit. |
| Implement stack limitation on VMS. |
| Minor reformatting. |
| |
| 2010-10-18 Vincent Celier <celier@adacore.com> |
| |
| * prj.adb (Is_Compilable): Do not modify Source.Compilable until the |
| source record has been initialized. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.adb: Minor code reorganization (Primitive_Operations is a |
| synthesized attribute routine and was in the wrong place). |
| |
| 2010-10-18 Tristan Gingold <gingold@adacore.com> |
| |
| * init.c: Indentation, and minor changes to more closely follow GNU |
| style rules. Make more variable statics. |
| |
| 2010-10-18 Vincent Celier <celier@adacore.com> |
| |
| * prj.adb (Is_Compilable): On first call for a source, cache value in |
| component Compilable. |
| * prj.ads (Source_Data): New component Compilable, to cache the value |
| returned by function Is_Compilable. |
| |
| 2010-10-18 Vincent Celier <celier@adacore.com> |
| |
| * prj-attr.adb: New project level attribute Ignore_Source_Sub_Dirs. |
| * prj-nmsc.adb (Expand_Subdirectory_Pattern): New string list parameter |
| Ignore. |
| (Recursive_Find_Dirs): Do not consider subdirectories listed in Ignore. |
| (Get_Directories): Call Find_Source_Dirs with the string list |
| indicated by attribute Ignore_Source_Sub_Dirs. |
| * snames.ads-tmpl: New standard name Ignore_Source_Sub_Dirs. |
| |
| 2010-10-18 Javier Miranda <miranda@adacore.com> |
| |
| * einfo.ads, einfo.adb (Primitive_Operations): New synthesized |
| attribute. |
| (Direct_Primitive_Operations): Renaming of old Primitive_Operations. |
| (Set_Direct_Primitive_Operations): Renaming of old |
| Set_Primitive_Operations. Update documentation |
| * sem_ch3.adb, exp_util.adb, sem_ch7.adb, sem_ch8.adb, exp_ch3.adb: |
| Replace occurrences of Set_Primitive_Operations by |
| Set_Direct_Primitive_Operations. |
| * sem_cat.adb (Validate_RACW_Primitives): No action needed for tagged |
| concurrent types. |
| * exp_dist.adb (Add_RACW_Primitive_Declarations_And_Bodies): Do not |
| process primitives of concurrent types. |
| * lib-xref.adb (Generate_Prim_Op_References): Minor code cleanup. |
| |
| 2010-10-18 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * exp_ch6.adb (Expand_N_Subprogram_Declaration): Use Freeze_Before. |
| (Expand_Protected_Object_Reference): Likewise. |
| * sem_attr.adb (Resolve_Attribute): Likewise. |
| * sem_ch3.adb (Analyze_Subtype_Declaration): Likewise. |
| * sem_ch6.adb (Analyze_Subprogram_Body_Helper): Likewise. |
| |
| 2010-10-18 Arnaud Charlet <charlet@adacore.com> |
| |
| * g-comlin.adb (Get_Switches): Prevent dereferencing null Config. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * aspects.ads, aspects.adb: Add entries for aspects |
| Read/Write/Input/Output. |
| * sem_ch13.adb (Analyze_Aspect_Specifications): Add processing for |
| handling aspects Read/Write/Input/Output. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * sem_util.adb (Note_Possible_Modification): Do not give warning for |
| use of pragma Unmodified unless we are sure this is a modification. |
| |
| 2010-10-18 Tristan Gingold <gingold@adacore.com> |
| |
| * sysdep.c: Add __gnat_get_stack_bounds. |
| * s-taprop-mingw.adb Call __gnat_get_stack_bounds to set Pri_Stack_Info. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * a-assert.ads: Fix bad name in header. |
| * sem_ch4.adb, sem_ch6.adb, sem_ch7.adb, sem_ch10.adb: Minor |
| reformatting. |
| * exp_aggr.adb: Fix typo in comment. |
| |
| 2010-10-18 Javier Miranda <miranda@adacore.com> |
| |
| * exp_util.adb (Side_Effect_Free): Code clean up. |
| |
| 2010-10-18 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch8.adb (Is_Primitive_Operator_In_Use): Renamed from |
| Is_Primitive_Operator. When ending the scope of a use package scope, a |
| primitive operator remains in use if the base type has a current use |
| (type) clause. |
| |
| 2010-10-18 Javier Miranda <miranda@adacore.com> |
| |
| * einfo.ads (Is_Dynamic_Support): Add missing support for limited |
| private types whose full-view is a task type. |
| * sem_util.adb (Enclosing_Subprogram): Add missing support for limited |
| private types whose full-view is a task type. |
| * exp_ch7.adb (Find_Final_List): Minor code cleanup replacing code by |
| function Nearest_Dynamic_Scope which provides the needed functionality. |
| |
| 2010-10-18 Arnaud Charlet <charlet@adacore.com> |
| |
| * sem_prag.adb (Set_Exported): Do not generate error when exporting a |
| variable with an address clause in codepeer mode. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * g-trasym-vms-ia64.adb: Minor reformatting. |
| |
| 2010-10-18 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_type.adb (Covers): If either argument is Standard_Void_Type and |
| the other isn't, return False early. |
| |
| 2010-10-18 Ed Falis <falis@adacore.com> |
| |
| * s-vxwext-rtp.ads, s-vxext-rtp.adb: Adapt for missing APIs for RTPs in |
| VxWorks Cert. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * sem_disp.ads: Minor comment update. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads, einfo.adb (Spec_PPC_List): Is now present in Entries |
| * sem_ch3.adb (Analyze_Declarations): Add processing for delaying |
| visibility analysis of precondition and postcondition pragmas (and |
| Pre/Post aspects). |
| * sem_ch6.adb (Process_PPCs): Add handling of inherited Pre'Class |
| aspects. |
| * sem_ch7.adb (Analyze_Package_Specification): Remove special handling |
| of pre/post conditions (no longer needed). |
| * sem_disp.adb (Inherit_Subprograms): Deal with interface case. |
| * sem_prag.adb (Analyze_PPC_In_Decl_Part): Remove analysis of message |
| argument, since this is now done in the main processing for |
| pre/postcondition pragmas when they are first seen. |
| (Chain_PPC): Pre'Class and Post'Class now handled properly |
| (Chain_PPC): Handle Pre/Post aspects for entries |
| (Check_Precondition_Postcondition): Handle entry declaration case |
| (Check_Precondition_Postcondition): Handle delay of visibility analysis |
| (Check_Precondition_Postcondition): Preanalyze message argument if |
| present. |
| |
| 2010-10-18 Robert Dewar <dewar@adacore.com> |
| |
| * g-trasym-vms-ia64.adb, prj-nmsc.adb, prj.ads: Minor reformatting. |
| |
| 2010-10-14 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (gnat_to_gnu_entity) <E_Array_Type>: Set |
| TREE_THIS_NOTRAP on the INDIRECT_REF node built for the template. |
| * gcc-interface/trans.c (Identifier_to_gnu): Set TREE_THIS_NOTRAP on |
| the INDIRECT_REF node built for objects used by reference. |
| * gcc-interface/utils2.c (build_binary_op): Add short-circuit for |
| constant result. Set TREE_THIS_NOTRAP on ARRAY_REF and ARRAY_RANGE_REF. |
| (gnat_stabilize_reference_1): Propagate the TREE_THIS_NOTRAP flag. |
| |
| 2010-10-13 Richard Henderson <rth@redhat.com> |
| |
| * gcc-interface/misc.c (gnat_eh_personality): Update call to |
| build_personality_function. |
| * raise-gcc.c (PERSONALITY_FUNCTION): Change to match other languages; |
| use__gnat_personality_{v,sj}0. |
| |
| 2010-10-12 Vincent Celier <celier@adacore.com> |
| |
| * prj-nmsc.adb (Add_Source): Put source in hash table Source_Files_HT |
| (Process_Exceptions_File_Based): Use hash table Source_Files_HT instead |
| of iterating through all sources of the project. |
| * prj.adb (Free): Reset hash table Source_Files_HT |
| (Reset): Reset hash table Source_Files_HT |
| * prj.ads (Source_Data): New component Next_With_File_Name |
| (Source_Files_Htable): New hash table |
| (Project_Tree_Data): New component Source_Files_HT |
| |
| 2010-10-12 Tristan Gingold <gingold@adacore.com> |
| |
| * g-trasym-vms-ia64.adb: Use the documented API. |
| * gcc-interface/Makefile.in: Always set NO_REORDER_ADAFLAGS. |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-12 Thomas Quinot <quinot@adacore.com> |
| |
| * rtsfind.ads, exp_dist.adb, exp_dist.ads (Build_General_Calling_Stubs, |
| PolyORB case): Request is now a controlled type: we can declare the |
| request on the stack, and we do not need explicit cleanup actions |
| anymore. |
| |
| 2010-10-12 Bob Duff <duff@adacore.com> |
| |
| * s-rident.ads (Profile_Info): This variable is now constant. |
| |
| 2010-10-12 Emmanuel Briot <briot@adacore.com> |
| |
| * g-comlin.adb, g-comlin.ads (Define_Switch): Put back (unused) |
| parameter Separator for backward compatibility. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch9.adb, par-ch9.adb, impunit.adb: Minor reformatting. |
| |
| 2010-10-12 Vincent Celier <celier@adacore.com> |
| |
| * debug.adb: Put detailed documentation for gnatmake switch -dm. |
| |
| 2010-10-12 Vincent Celier <celier@adacore.com> |
| |
| * gnat1drv.adb: When the compiler is invoked for a spec that needs aw |
| body, do not generate an ALI file if neither -gnatc nor -gnatQ is used. |
| |
| 2010-10-12 Arnaud Charlet <charlet@adacore.com> |
| |
| * g-comlin.adb (Foreach_Switch): Make this procedure generic to avoid |
| using 'Access. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * debug.adb: Add comment. |
| * gnatcmd.adb, sem_ch6.adb, switch-m.adb: Minor reformatting. |
| |
| 2010-10-12 Javier Miranda <miranda@adacore.com> |
| |
| * exp_util.adb (Side_Effect_Free): Return true for object renaming |
| declarations that were previously generated by Remove_Side_Effects. |
| |
| 2010-10-12 Emmanuel Briot <briot@adacore.com> |
| |
| * xref_lib.adb (Get_Full_Type): Display "private variable" instead of |
| "???" when an entity is defined as "*" in the ALI file. |
| * g-comlin.ads, g-comlin.adb: Fix handling of null parameters. |
| Minor reformatting. |
| |
| 2010-10-12 Emmanuel Briot <briot@adacore.com> |
| |
| * g-comlin.adb, g-comlin.ads (Display_Help, Getopt, Current_Section, |
| Set_Usage): New subprograms. |
| (Define_Switch): Change profile to add support for help messages and |
| long switches. |
| |
| 2010-10-12 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch6.adb (New_Overloaded_Entity): Add missing decoration of |
| attribute Overridden_Operation in predefined dispatching primitives. |
| |
| 2010-10-12 Emmanuel Briot <briot@adacore.com> |
| |
| * g-comlin.adb, g-comlin.ads (Add_Switch): Raise an exception when a |
| command line configuration exists and we specify an invalid section. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch6.adb (Process_PPCs): Fix error in inheriting Pre'Class when no |
| exception messages are generated. |
| (Process_PPCs): Fix error in inheriting Pre'Class. |
| |
| 2010-10-12 Jose Ruiz <ruiz@adacore.com> |
| |
| * gnatcmd.adb: Use response file for GNATstack. |
| (Check_Files): Pass the list of ci files for GNATstack using a response |
| file to avoid problems with command line length. |
| Factor out the code handling response file into a new procedure named |
| Add_To_Response_File. |
| |
| 2010-10-12 Vincent Celier <celier@adacore.com> |
| |
| * debug.adb: For gnatmake, document the meaning of -dm |
| * make.adb (Gnatmake): If -dm is used, indicate the maximum number of |
| simultaneous compilations. |
| * switch-m.adb (Scan_Make_Switches): Allow -j0, meaning as many |
| simultaneous compilations as the number of processors. |
| |
| 2010-10-12 Joseph Myers <joseph@codesourcery.com> |
| |
| * gcc-interface/Make-lang.in (ada/misc.o): Use $(OPTIONS_H) |
| instead of options.h. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * gnat_rm.texi: Clarify that 'Old can be used in preconditions and |
| postcondition pragmas. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * errout.ads, erroutc.adb: The # insertion now handles from in place of |
| at. |
| * exp_prag.adb (Expand_Pragma_Check): Suppress generated default |
| message if new switch Exception_Locations_Suppressed is set. |
| (Expand_Pragma_Check): Revised wording for default message for case |
| of precondition or postcondition. |
| * namet.ads, namet.adb (Build_Location_String): New procedure. |
| * opt.ads (List_Inherited_Pre_Post): New flag. |
| * sem_ch12.adb (Analyze_Generic_Subprogram_Declaration): Add call to |
| list inherited pre/post aspects. |
| * sem_ch13.adb (Analyze_Aspect_Specification): Improve generation of |
| messages for precondition/postcondition cases. |
| * sem_ch6.adb (Process_PPCs): General cleanup, and list inherited PPC's |
| if flag List_Inherited_Pre_Post is set True. |
| (Process_PPCs): Add initial handling for inherited preconditions |
| (List_Inherited_Pre_Post_Aspects): New procedure |
| * sem_ch6.ads (List_Inherited_Pre_Post_Aspects): New procedure |
| * sem_disp.adb (Inherited_Subprograms): New function |
| * sem_disp.ads (Inherited_Subprograms): New function |
| * sem_prag.adb (Check_Duplicate_Pragma): Clean up handling of |
| pre/postcondition. |
| (Check_Precondition_Postcondition): Check for inherited aspects |
| * sem_warn.adb: Process -gnatw.l/w.L setting List_Inherited_Pre_Post |
| * sinfo.ads, sinfo.adb (Split_PPC): New flag. |
| * sinput.ads, sinput.adb (Build_Location_String): New function. |
| * usage.adb: Add line for -gnatw.l/-gnatw.L |
| |
| 2010-10-12 Javier Miranda <miranda@adacore.com> |
| |
| * exp_util.adb (Remove_Side_Effects): Remove wrong code. |
| |
| 2010-10-12 Arnaud Charlet <charlet@adacore.com> |
| |
| * xref_lib.adb: Add handling of j/J letters. |
| |
| 2010-10-12 Pascal Obry <obry@adacore.com> |
| |
| * adaint.c (__gnat_number_of_cpus): Add implementation for Windows. |
| |
| 2010-10-12 Arnaud Charlet <charlet@adacore.com> |
| |
| * make.adb (Globalize): New procedure. |
| (Compile): Set Do_Codepeer_Globalize_Step when -gnatC is used. |
| (Gnatmake): Call Globalize when needed. |
| (Process_Restrictions_Or_Restriction_Warnings): Ignore Restrictions |
| pragmas in CodePeer mode. |
| (Adjust_Global_Switches): Set No_Initialize_Scalars in CodePeer mode, |
| to generate simpler and consistent code. |
| |
| 2010-10-12 Bob Duff <duff@adacore.com> |
| |
| * exp_util.adb (Remove_Side_Effects): Disable previous change, |
| can cause side effects to be duplicated. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch6.adb (Process_PPCs): Handle inherited postconditions. |
| |
| 2010-10-12 Arnaud Charlet <charlet@adacore.com> |
| |
| * exp_disp.adb (Set_All_DT_Position): Disable emit error message on |
| abstract inherited private operation in CodePeer mode. |
| |
| 2010-10-12 Thomas Quinot <quinot@adacore.com> |
| |
| * a-exetim.ads: Minor reformatting. |
| * g-socket.ads (Port_Type): Better definition corresponding to the |
| actual standard range. |
| * exp_ch5.adb: Add comment. |
| * sem_aux.adb: Minor reformatting. |
| |
| 2010-10-12 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch12.adb (Copy_Generic_Node): If node is a string literal, remove |
| string_literal_subtype so that a new one can be constructed in the |
| scope of the instance. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch9.adb (Has_Pragma_Priority): New name for Has_Priority_Pragma |
| * gnat_rm.texi (pragma Suppress_All): Document new placement rules |
| * par-prag.adb (P_Pragma, case Suppress_All): Set |
| Has_Pragma_Suppress_All flag. |
| * sem_prag.adb (Has_Pragma_Priority): New name for Has_Priority_Pragma |
| (Analyze_Pragma, case Suppress_All): Remove placement check |
| (Process_Compilation_Unit_Pragmas): Use Has_Pragma_Suppress_All flag |
| * sem_prag.ads (Process_Compilation_Unit_Pragmas): Update documentation |
| * sinfo.adb (Has_Pragma_Suppress_All): New flag |
| (Has_Pragma_Priority): New name for Has_Priority_Pragma |
| * sinfo.ads (Has_Pragma_Suppress_All): New flag |
| (Has_Pragma_Priority): New name for Has_Priority_Pragma |
| |
| 2010-10-12 Arnaud Charlet <charlet@adacore.com> |
| |
| * lib-xref.ads: Mark j/J as reserved for C++ classes. |
| |
| 2010-10-12 Jose Ruiz <ruiz@adacore.com> |
| |
| * a-exetim-default.ads, a-exetim-posix.adb: New. |
| * gcc-interface/Makefile.in (LIBGNAT_TARGET_PAIRS for linux): Use the |
| POSIX Realtime support to implement CPU clocks. |
| (EXTRA_GNATRTL_TASKING_OBJS for linux): Add the a-exetim.o object |
| to the tasking library. |
| (THREADSLIB): Make the POSIX.1b Realtime Extensions library (librt) |
| available for shared libraries. |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch13.adb (Analyze_Aspect_Specifications): For Pre/Post, break |
| apart expressions with AND THEN clauses into separate pragmas. |
| * sinput.ads, sinput.adab (Get_Logical_Line_Number_Img): New function. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch13.adb (P_Aspect_Specifications): Fix handling of 'Class |
| aspects. |
| * sem_ch13.adb (Analyze_Aspect_Specifications): Fix bad Sloc on aspects |
| * sem_prag.adb (Fix_Error): Only change pragma names for pragmas from |
| aspects. |
| (Check_Optional_Identifier): Handle case of direct arguments |
| (Chain_PPC): Test for abstract case, giving appropriate messages |
| * sinfo.ads, sinfo.adb (Class_Present): Allowed on N_Pragma node |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * par-endh.adb (Check_End): Don't swallow semicolon or aspects after |
| END RECORD. |
| * sem_attr.adb (Eval_Attribute): Code clean up. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch12.adb (P_Formal_Private_Type_Definition): Improve error |
| messages and recovery for case of out of order Abstract/Tagged/Private |
| keywords. |
| * par-ch3.adb (P_Type_Declaration): Improve error messages and recovery |
| for case of out of order Abstract/Tagged/Private keywords. |
| |
| 2010-10-12 Ed Schonberg <schonberg@adacore.com> |
| |
| * inline.adb (Analyze_Inlined_Bodies): Restrict previous change to case |
| where child unit is main unit of compilation. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * aspects.ads, aspects.adb (Move_Aspects): New procedure. |
| * atree.ads, atree.adb: (New_Copy): Does not copy aspect specifications |
| * sinfo.ads, par-ch3.adb, par-ch6.adb, par-ch7.adb, par-ch9.adb, |
| par-endh.adb, par-ch13.adb, par-ch12.adb: Modify grammar to include |
| aspect specifications. |
| Recognize aspect specifications for all cases |
| * par.adb: Recognize aspect specifications for all cases |
| * sem_ch12.ads, sem_ch12.adb (Copy_Generic_Node): Copies aspect |
| specifications. |
| * sem_ch3.adb (Analyze_Subtype_Declaration): Improve patch to freeze |
| generic actual types (was missing some guards before). |
| * sem_ch9.adb (Analyze_Single_Protected_Declaration): Copy aspects to |
| generated object |
| (Analyze_Single_Task_Declaration): Copy aspects to generated object |
| |
| 2010-10-12 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * usage.adb (usage): Adjust line for -gnatn switch. |
| |
| 2010-10-12 Robert Dewar <dewar@adacore.com> |
| |
| * sem_attr.adb (Eval_Attribute): Only leave change active for aspect |
| spec case. |
| |
| 2010-10-12 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch6.adb (Analyze_Subprogram_Declaration): If this is a |
| declaration of a null procedure resolve the types of the profile of the |
| generated null body now. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * debug.adb: Remove d.A flag to delay address clause (not needed any |
| more). Add d.A flag to enable tree read/write of aspect spec hash table |
| * sem_ch13.adb (Analyze_Aspect_Specifications): Properly delay address |
| clause. |
| (Rep_Item_Too_Late): No need for special processing for delayed rep |
| items (and it caused difficulties in the address case). |
| * tree_gen.adb: Only write aspect spec hash table if -gnatd.A is set |
| * tree_in.adb: Only write aspect spec hash table if -gnatd.A is set |
| |
| 2010-10-11 Pat Rogers <rogers@adacore.com> |
| |
| * gnat_ugn.texi: Minor editing. |
| |
| 2010-10-11 Nathan Froyd <froydnj@codesourcery.com> |
| |
| * gcc-interface/utils2.c (gnat_build_constructor): Use VEC_qsort. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * g-htable.ads (Get_First): New procedural version for Simple_HTable |
| (Get_Next): New procedural version for Simple_HTable |
| * s-htable.adb (Get_First): New procedural version for Simple_HTable |
| (Get_Next): New procedural version for Simple_HTable |
| * s-htable.ads (Get_First): New procedural version for Simple_HTable |
| (Get_Next): New procedural version for Simple_HTable |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_aggr.adb (Propagate_Discriminants): To gather the components of a |
| variant part, use the association list of the subaggregate, which |
| already includes the values of the needed discriminants. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * aspects.ads, aspects.adb: Changes to accomodate aspect delay |
| (Tree_Write): New procedure. |
| * atree.ads, atree.adb: Flag3 is now Has_Aspects and applies to all |
| nodes. |
| * atree.h: Flag3 is now Has_Aspects and applies to all nodes |
| * debug.adb: Add debug flag gnatd.A |
| * einfo.adb (Has_Delayed_Aspects): New flag |
| (Get_Rep_Item_For_Entity): New function |
| * einfo.ads (Has_Delayed_Aspects): New flag |
| (Get_Rep_Item_For_Entity): New function |
| * exp_ch13.adb (Expand_N_Freeze_Entity): Insert delayed aspects into |
| tree. |
| * exp_ch3.adb, exp_ch6.adb, exp_ch9.adb, exp_disp.adb: New calling |
| sequence for Freeze_Entity. |
| * freeze.ads, freeze.adb (Freeze_Entity): Takes node rather than source |
| ptr. All calls are changed to this new interface. |
| (Freeze_And_Append): Same change |
| (Freeze_Entity): Evaluate deferred aspects |
| * sem_attr.adb: New calling sequence for Freeze_Entity |
| (Eval_Attribute): Don't try to evaluate attributes of unfrozen types |
| when we are in spec expression preanalysis mode. |
| * sem_ch10.adb: New calling sequence for Freeze_Entity |
| * sem_ch11.adb: Simplify analysis of aspect specifications now that the |
| flag Has_Aspects applies to all nodes (no need to save aspects). |
| * sem_ch12.adb: Simplify analysis of aspect specifications now that the |
| flag Has_Aspects applies to all nodes (no need to save aspects). |
| * sem_ch13.adb (Analyze_Aspect_Specifications): Major rewrite to |
| accomodate delaying aspect evaluation to the freeze point. |
| (Duplicate_Clause): Simplify using Get_Rep_Item_For_Entity, and also |
| accomodate delayed aspects. |
| (Rep_Item_Too_Late): Deal with delayed aspects case |
| * sem_ch13.ads (Rep_Item_Too_Late): Document handling of delayed |
| aspects. |
| * sem_ch3.adb (Analyze_Subtype_Declaration): Make sure that generic |
| actual types are properly frozen (this is needed because of the new |
| check in Eval_Attribute that declines to evaluate attributes |
| for unfrozen types). |
| Simplify analysis of aspect specifications now that the flag |
| Has_Aspects applies to all nodes (no need to save aspects). |
| * sem_ch3.ads (Preanalyze_Spec_Expression): Note use for delayed |
| aspects. |
| * sem_ch5.adb: Simplify analysis of aspect specifications now that the |
| flag Has_Aspects applies to all nodes (no need to save aspects). |
| New calling sequence for Freeze_Entity. |
| * sem_ch9.adb, sem_ch7.adb, sem_ch6.adb: Simplify analysis of aspect |
| specifications now that the flag Has_Aspects applies to all nodes |
| (no need to save aspects). |
| New calling sequence for Freeze_Entity |
| * sem_prag.adb (Check_Duplicate_Pragma): Simplify using |
| Get_Rep_Item_For_Entity |
| (Get_Pragma_Arg): Moved to Sinfo |
| * sinfo.ads, sinfo.adb (Aspect_Rep_Item_: New field |
| (Is_Delayed_Aspect): New flag |
| (Next_Rep_Item): Document use for aspects |
| (Get_Pragma_Arg): Moved here from Sem_Prag |
| * sprint.adb (Sprint_Aspect_Specifications): Now called after semicolon |
| is output and removes semicolon (simplifies interface). |
| (Sprint_Node_Actual): Simplify handling of aspects now that Has_Aspects |
| applies to any node. |
| * tree_gen.adb: Write contents of Aspect_Specifications hash table |
| * tree_in.adb: Read and initialize Aspect_Specifications hash table |
| * treepr.adb (Print_Node): Print Has_Aspects flag |
| (Print_Node): Print Aspect_Specifications in Has_Aspects set |
| * xtreeprs.adb: Remove obsolete references to Flag1,2,3 |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * aspects.ads, aspects.adb: Major revision of this package for 2nd |
| stage of aspects implementation. |
| * gcc-interface/Make-lang.in: Add entry for aspects.o |
| * gcc-interface/Makefile.in: Add aspects.o to GNATMAKE_OBJS |
| * par-ch13.adb (Aspect_Specifications_Present): New function |
| (P_Aspect_Specifications): New procedure |
| * par-ch3.adb (P_Type_Declaration): Handle aspect specifications |
| (P_Derived_Type_Def_Or_Private_Ext_Decl): Handle aspect specifications |
| (P_Identifier_Declarations): Handle aspect specifications |
| (P_Component_Items): Handle aspect specifications |
| (P_Subtype_Declaration): Handle aspect specifications |
| * par-ch6.adb (P_Subprogram): Handle aspect specifications |
| * par-ch9.adb (P_Entry_Declaration): Handle aspect specifications |
| * par.adb (Aspect_Specifications_Present): New function |
| (P_Aspect_Specifications): New procedure |
| * sem.adb (Analyze_Full_Type_Declaration): New name for |
| Analyze_Type_Declaration. |
| (Analyze_Formal_Package_Declaration): New name (add _Declaration) |
| (Analyze_Formal_Subprogram_Declaration): New name (add _Declaration) |
| (Analyze_Protected_Type_Declaration): New name (add _Declaration) |
| (Analyze_Single_Protected_Declaration): New name (add _Declaration) |
| (Analyze_Single_Task_Declaration): New name (add _Declaration) |
| (Analyze_Task_Type_Declaration): New name (add _Declaration) |
| * sem_cat.adb (Analyze_Full_Type_Declaration): New name for |
| Analyze_Type_Declaration. |
| * sem_ch11.adb (Analyze_Exception_Declaration): Analyze aspect |
| specifications. |
| * sem_ch12.adb (Analyze_Formal_Object_Declaration): Handle aspect |
| specifications. |
| (Analyze_Formal_Package_Declaration): New name (add _Declaration) |
| (Analyze_Formal_Package_Declaration): Handle aspect specifications |
| (Analyze_Formal_Subprogram_Declaration): New name (add _Declaration) |
| (Analyze_Formal_Subprogram_Declaration): Handle aspect specifications |
| (Analyze_Formal_Type_Declaration): Handle aspect specifications |
| (Analyze_Generic_Package_Declaration): Handle aspect specifications |
| (Analyze_Generic_Subprogram_Declaration): Handle aspect specifications |
| (Analyze_Package_Instantiation): Handle aspect specifications |
| (Analyze_Subprogram_Instantiation): Handle aspect specifications |
| * sem_ch12.ads (Analyze_Formal_Package_Declaration): New name (add |
| _Declaration). |
| (Analyze_Formal_Subprogram_Declaration): New name (add _Declaration) |
| * sem_ch13.adb (Analyze_Aspect_Specifications): New procedure |
| (Duplicate_Clause): New function, calls to this function are added to |
| processing for all aspects. |
| * sem_ch13.ads (Analyze_Aspect_Specifications): New procedure |
| * sem_ch3.adb (Analyze_Full_Type_Declaration): New name for |
| Analyze_Type_Declaration. |
| * sem_ch3.ads (Analyze_Full_Type_Declaration): New name for |
| Analyze_Type_Declaration. |
| * sem_ch6.adb (Analyze_Abstract_Subprogram_Declaration): Analyze aspect |
| specifications. |
| (Analyze_Subprogram_Declaration): Analyze aspect specifications |
| * sem_ch7.adb (Analyze_Package_Declaration): Analyze aspect |
| specifications. |
| (Analyze_Private_Type_Declaration): Analyze aspect specifications |
| * sem_ch9.adb (Analyze_Protected_Type_Declaration): Analyze aspect |
| specifications. |
| (Analyze_Protected_Type_Declaration): New name (add _Declaration) |
| (Analyze_Single_Protected_Declaration): Analyze aspect specifications |
| (Analyze_Single_Protected_Declaration): New name (add _Declaration) |
| (Analyze_Single_Task_Declaration): Analyze aspect specifications |
| (Analyze_Single_Task_Declaration): New name (add _Declaration) |
| (Analyze_Task_Type_Declaration): Analyze aspect specifications |
| (Analyze_Task_Type_Declaration): New name (add _Declaration) |
| * sem_ch9.ads (Analyze_Protected_Type_Declaration): New name (add |
| _Declaration). |
| (Analyze_Single_Protected_Declaration): New name (add _Declaration) |
| (Analyze_Single_Task_Declaration): New name (add _Declaration) |
| (Analyze_Task_Type_Declaration): New name (add _Declaration) |
| * sem_prag.adb: Use Get_Pragma_Arg systematically so that we do not |
| have to generate unnecessary pragma argument associations (this matches |
| the doc). |
| Throughout do changes to accomodate aspect specifications, including |
| specializing messages, handling the case of not going through all |
| homonyms, and allowing for cancellation. |
| * sinfo.ads, sinfo.adb: Clean up obsolete documentation for Flag1,2,3 |
| (Aspect_Cancel): New flag |
| (From_Aspect_Specification): New flag |
| (First_Aspect): Removed flag |
| (Last_Aspect): Removed flag |
| * sprint.adb (Sprint_Aspect_Specifications): New procedure |
| (Sprint_Node_Actual): Add calls to Sprint_Aspect_Specifications |
| |
| 2010-10-11 Bob Duff <duff@adacore.com> |
| |
| * sem_res.adb (Resolve_Actuals): Minor change to warning messages so |
| they match in Ada 95, 2005, and 2012 modes, in the case where the |
| language didn't change. Same thing for the run-time exception message. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * debug.adb Document that switch -gnatd.p enables the CIL verifier. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * s-htable.adb: Minor reformatting. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * debug.adb: Update comment. |
| |
| 2010-10-11 Vincent Celier <celier@adacore.com> |
| |
| * gnatcmd.adb (GNATCmd): Set Opt.Unchecked_Shared_Lib_Imports to True |
| unconditionally as for "gnat make" the projects are not processed in |
| the GNAT driver. |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch10.ads, sem_ch10.adb (Load_Needed_Body): Add parameter to |
| suppress semantic analysis of the body when inlining, prior to |
| verifying that the body does not have a with_clause on a descendant |
| unit. |
| * inline.adb (Analyze_Inlined_Bodies): Do not inline a body if it has a |
| with_clause on a descendant. |
| (Scope_In_Main_Unit): Simplify. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch6.adb, freeze.adb: Minor reformatting. |
| |
| 2010-10-11 Vincent Celier <celier@adacore.com> |
| |
| * gnatcmd.adb (GNATCmd): For all tools other than gnatmake, allow |
| shared library projects to import projects that are not shared library |
| projects. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * debug.adb: Document that switch -gnatd.o generates the CIL listing. |
| |
| 2010-10-11 Arnaud Charlet <charlet@adacore.com> |
| |
| * sem_prag.adb (Process_Suppress_Unsuppress): Only ignore |
| Suppress/Unsuppress pragmas in codepeer mode on user code. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * exp_ch6.adb (Expand_Call): For VM platforms, add missing expansion of |
| tag check in case of dispatching call through "=". |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch3.adb (Access_Subprogram_Declaration): In Ada2012 an incomplete |
| type is legal in the profile of any basic declaration. |
| * sem_ch6.adb (Analyze_Return_Type, Process_Formals): In Ada2012 an |
| incomplete type, including a limited view of a type, is legal in the |
| profile of any subprogram declaration. |
| If the type is tagged, its use is also legal in a body. |
| * sem_ch10.adb (Install_Limited_With_Clause): Do not process context |
| item if misplaced. |
| (Install_Limited_Withed_Unit): Refine legality checks when both the |
| limited and the non-limited view of a package are visible in the |
| context of a unit. |
| If this is not an error case, the limited view is ignored. |
| freeze.adb (Freeze_Entity): In Ada2012, an incomplete type is legal in |
| access to subprogram declarations |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch6.adb: Code clean up. |
| * exp_util.adb: Minor reformatting. |
| |
| 2010-10-11 Arnaud Charlet <charlet@adacore.com> |
| |
| * sem_ch3.adb, exp_ch6.adb |
| (Make_Build_In_Place_Call_In_Anonymous_Context, |
| Make_Build_In_Place_Call_In_Assignment, |
| Make_Build_In_Place_Call_In_Object_Declaration): Fix calls to |
| Add_Task_Actuals_To_Build_In_Place_Call in case of No_Task_Hierarchy |
| restriction. |
| (Access_Definition): Add missing handling of No_Task_Hierarchy. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * exp_util.adb (Remove_Side_Effects): No action needed for renamings of |
| class-wide expressions. |
| |
| 2010-10-11 Arnaud Charlet <charlet@adacore.com> |
| |
| * xr_tabls.adb, sem_res.adb: Minor reformatting |
| |
| 2010-10-11 Arnaud Charlet <charlet@adacore.com> |
| |
| * gnat_rm.texi, exp_attr.adb, sem_attr.adb, sem_attr.ads, |
| snames.ads-tmpl (Analyze_Attribute, Expand_N_Attribute_Reference): Add |
| handling of Attribute_Ref. Add missing blanks in some error messages. |
| (Attribute_Ref, Name_Ref): Declare. |
| Document 'Ref attribute. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * sem_attr.adb: Minor reformatting. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch8.adb (Attribute_Renaming): Add missing check to avoid loading |
| package System.Aux_Dec in VM platforms. |
| |
| 2010-10-11 Arnaud Charlet <charlet@adacore.com> |
| |
| * sem_prag.adb (Process_Suppress_Unsuppress): Ignore |
| Suppress/Unsuppress pragmas in codepeer mode. |
| (Analyze_Pragma [Pragma_Suppress_All]): Do not generate error message |
| in codepeer mode. |
| * einfo.ads: Fix typo. |
| |
| 2010-10-11 Emmanuel Briot <briot@adacore.com> |
| |
| * sinfo.adb: Use GNAT.HTable rather than System.HTable. |
| * prj-nmsc.adb: Minor reformatting. |
| |
| 2010-10-11 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_attr.adb (Type_Key): Code simplification. |
| |
| 2010-10-11 Tristan Gingold <gingold@adacore.com> |
| |
| * gcc-interface/utils2.c (maybe_wrap_malloc): Fix crash when allocating |
| very large object on VMS. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch10.adb (Analyze_With_Clause): Add missing test to ensure |
| availability of attribute Instance_Spec. |
| |
| 2010-10-11 Arnaud Charlet <charlet@adacore.com> |
| |
| * gnat1drv.adb (Adjust_Global_Switches): Disable codepeer mode if |
| checking syntax only or in ASIS mode. |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch6.adb (Check_Delayed_Subprogram): Abstract subprograms may also |
| need a freeze node if some type in the profile has one. |
| * gcc-interface/trans.c (case N_Abstract_Subprogram_Declaration): If |
| entity has a freeze node, defer elaboration. |
| |
| 2010-10-11 Emmanuel Briot <briot@adacore.com> |
| |
| * prj-nmsc.adb (Check_Aggregate_Project): Add support for finding all |
| aggregated projects. |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_res.adb (Resolve_Entry_Call): Generate 's' reference for entry |
| call. |
| * sem_ch6.adb: Diagnose additional error condition. |
| |
| 2010-10-11 Bob Duff <duff@adacore.com> |
| |
| * par.adb (Par): Clarify wording of certain error messages. |
| |
| 2010-10-11 Gary Dismukes <dismukes@adacore.com> |
| |
| * sem_disp.adb (Check_Dispatching_Operation): Revise test for warning |
| about nondispatching subprograms to use In_Same_List (reducing use of |
| Parent links). |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * xr_tabls.adb, sem_res.adb, lib-xref.adb, lib-xref.ads: Use s for |
| reference in a static call. |
| |
| 2010-10-11 Steve Baird <baird@adacore.com> |
| |
| * exp_attr.adb (Expand_N_Attribute_Reference, case Type_Key): Type_Key |
| attribute should always be transformed into a string literal in |
| Analyze_Attribute. |
| * par-ch4.adb: Type_Key attribute's type is String; update value of |
| Is_Parameterless_Attribute constant to reflect this. |
| * sem_attr.adb (Analyze_Attribute): Recognize Type_Key attribute and |
| rewrite it as a string literal (attribute value is always known |
| statically). |
| * snames.ads-tmpl: Add entries for Type_Key attribute. |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * lib-xref.adb (Output_References): Common handling for objects and |
| formals of an anonymous access type. |
| |
| 2010-10-11 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * make.adb (Scan_Make_Arg): Also pass -O to both compiler and linker. |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch6.adb: Fix check for illegal equality declaration in Ada2012 |
| |
| 2010-10-11 Gary Dismukes <dismukes@adacore.com> |
| |
| * sem_disp.adb (Check_Dispatching_Operation): When testing for issuing |
| a warning about subprograms of a tagged type not being dispatching, |
| limit this to cases where the tagged type and the subprogram are |
| declared within the same declaration list. |
| |
| 2010-10-11 Jerome Lambourg <lambourg@adacore.com> |
| |
| * projects.texi, prj-attr.adb: Add new attribute documentation_dir. |
| |
| 2010-10-11 Bob Duff <duff@adacore.com> |
| |
| * par-ch9.adb, sem_aggr.adb, exp_ch5.adb, sem_ch3.adb, impunit.adb, |
| impunit.ads, sem_ch5.adb, sem_type.adb, exp_imgv.adb, exp_util.adb, |
| switch-c.adb, exp_attr.adb, exp_ch9.adb, par-ch11.adb, usage.adb, |
| sem_ch9.adb, sem_ch10.adb, scng.adb, checks.adb, sem_prag.adb, |
| sem_ch12.adb, par-ch2.adb, freeze.adb, par-ch4.adb, sem_util.adb, |
| sem_res.adb, sem_attr.adb, par-ch6.adb, exp_ch4.adb, exp_ch6.adb, |
| sem_ch4.adb, exp_ch8.adb, par-ch10.adb, sem_ch6.adb, par-prag.adb, |
| exp_disp.adb, par-ch12.adb, sem_ch8.adb, snames.adb-tmpl, opt.ads, |
| exp_aggr.adb, sem_cat.adb, sem_ch13.adb, par-ch3.adb, exp_strm.adb, |
| exp_cg.adb, lib-xref.adb, sem_disp.adb, exp_ch3.adb: Use Ada_2005 |
| instead of Ada_05 (Ada_Version_Type). |
| |
| 2010-10-11 Bob Duff <duff@adacore.com> |
| |
| * sem_aggr.adb, impunit.adb, impunit.ads, switch-c.adb, usage.adb, |
| sem_ch10.adb, sem_prag.adb, sem_ch12.adb, par-ch4.adb, par-ch6.adb, |
| par-ch8.adb, exp_ch4.adb, sem_ch4.adb, sem_ch6.adb, par-prag.adb, |
| opt.ads, par-ch3.adb, lib-xref.adb: Use Ada_2012 instead of Ada_12 |
| (Ada_Version_Type). |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * exp_util.adb (Safe_Prefixed_Reference): If the prefix is an explicit |
| dereference then do not exclude dereferences of access-to-constant |
| types to handle them as constant view of variables (and hence remove |
| side effects when required). |
| * sem_res.adb (Resolve_Slice): Ensure that side effects in the bounds |
| are properly handled. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * sem_prag.adb, sem_aggr.adb, sprint.adb: Minor reformatting. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * exp_ch5.ads, exp_ch6.ads (Expand_N_Extended_Return_Statement): Moved |
| to exp_ch6. |
| (Expand_N_Simple_Return_Statement): Moved to exp_ch6. |
| * exp_ch5.adb, exp_ch6.adb (Expand_Non_Function_Return): Moved to |
| exp_ch6. |
| (Expand_Simple_Function_Return): Move to exp_ch6. |
| (Expand_N_Extended_Return_Statement): Moved to exp_ch6. |
| (Expand_N_Simple_Return_Statement): Moved to exp_ch6. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * snames.ads-tmpl: Add names for aspects. |
| * aspects.ads, aspects.adb: New. |
| * gcc-interface/Make-lang.in: Update dependencies. |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch6.adb (Expand_Actuals): If an actual is the current instance of |
| a task type, it must be replaced with a reference to Self. |
| |
| 2010-10-11 Vincent Celier <celier@adacore.com> |
| |
| * adaint.h: Add prototype for function __gnat_create_output_file_new. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * sem_aggr.adb (Collect_Aggr_Bounds): Remove side effects of collected |
| aggregate bounds. |
| |
| 2010-10-11 Arnaud Charlet <charlet@adacore.com> |
| |
| * sem_prag.adb (Check_Interrupt_Or_Attach_Handler): Do not emit error |
| for AI05-0033 in CodePeer mode. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * atree.h, atree.ads, atree.adb (Flag3): New flag (replaces Unused_1) |
| * csinfo.adb: Aspect_Specifications is a new special field |
| * einfo.adb (Flag3): New unused flag |
| * exp_util.adb (Insert_Actions): Add processing for |
| N_Aspect_Specification. |
| * sem.adb: Add entry for N_Aspect_Specification. |
| * sinfo.ads, sinfo.adb (N_Aspect_Specification): New node |
| (Has_Aspect_Specifications): New flag |
| (Permits_Aspect_Specifications): New function |
| (Aspect_Specifications): New function |
| (Set_Aspect_Specifications): New procedure |
| * sprint.adb (Sprint_Node): Put N_At_Clause in proper alpha order |
| (Sprint_Node): Add dummy entry for N_Aspect_Specification |
| * treepr.adb (Flag3): New flag to be listed |
| |
| 2010-10-11 Vincent Celier <celier@adacore.com> |
| |
| * adaint.c: Minor reformatting. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch6.adb, s-htable.ads: Minor reformatting. |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch4.adb (Analyze_Selected_Component): If the selector is |
| invisible in an instantiation, and both the formal and the actual are |
| private extensions of the same type, look for the desired component in |
| the proper view of the parent type. |
| |
| 2010-10-11 Vincent Celier <celier@adacore.com> |
| |
| * adaint.c (__gnat_number_of_cpus): Add implementation for Solaris, |
| AIX, Tru64, Darwin, IRIX and HP-UX. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * a-textio.adb: Minor reformatting |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * a-suesen.ads, a-suenst.ads, |
| a-suesen.adb, a-suenst.adb, |
| a-suewse.adb, a-suewst.adb, |
| a-suewse.ads, a-suewst.ads, |
| a-suezse.ads, a-suezst.ads, |
| a-suezse.adb, a-suezst.adb: New name for string encoding packages. |
| * impunit.adb: New names for string encoding units |
| * Makefile.rtl: New names for string encoding units |
| * rtsfind.ads: Minor code reorganization. |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch5.adb: Code clean up. |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch6.adb (Check_Limited_Return): Specialize warning on limited |
| returns when in a generic context. |
| (Analyze_Function_Return): ditto. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * s-multip.ads: Fix header. |
| * sem_ch3.adb, s-multip.adb, a-tigeli.adb: Minor reformatting. |
| |
| 2010-10-11 Vincent Celier <celier@adacore.com> |
| |
| * Makefile.rtl: Add s-multip. |
| * adaint.c: New function __gnat_number_of_cpus, implemented for Linux, |
| defaulting to 1 for other platforms. |
| * adaint.h: New function __gnat_number_of_cpus. |
| * impunit.adb (Non_Imp_File_Names_12): New file list for Ada 2012, |
| with a single component "s-multip". |
| * impunit.ads (Kind_Of_Unit): New enumerated value Ada_12_Unit for Ada |
| 2012. |
| * rtsfind.ads (RTU_Id): New enumerated value System_Multiprocessors |
| * s-multip.ads, s-multip.adb: New Ada 2012 package. |
| * sem_ch10.adb (Analyze_With_Clause): Check also Ada 2012 units. |
| |
| 2010-10-11 Javier Miranda <miranda@adacore.com> |
| |
| * a-textio.adb: Move new implementation of Get_Line to a subunit. |
| * a-tigeli.adb: New subunit containing the implementation of Get_Line. |
| |
| 2010-10-11 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_aux.adb: Code clean up. |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch3.adb, sem_aux.adb, sem_ch6.adb: Minor reformatting |
| |
| 2010-10-11 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.adb, atree.h, atree.ads, atree.adb: Define seven new flags |
| Flag248-Flag254. Define new field Field29. |
| |
| 2010-10-10 Olivier Hainque <hainque@adacore.com> |
| Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/lang.opt (gdwarf+): Remove. |
| * gcc-interface/gigi.h (get_parallel_type): Likewise |
| * gcc-interface/misc.c (gnat_dwarf_extensions): Likewise. |
| (gnat_handle_option): Remove OPT_gdwarfplus case. |
| (gnat_post_options): Remove setting of use_gnu_debug_info_extensions |
| from gnat_dwarf_extensions. |
| * gcc-interface/trans.c (gigi): Remove -gdwarf+ initializations. |
| * gcc-interface/utils.c (get_parallel_type): Remove. |
| |
| 2010-10-10 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/trans.c (gnat_to_gnu) <N_Not_In>: Use |
| invert_truthvalue_loc instead of invert_truthvalue. |
| * gcc-interface/utils2.c (build_binary_op) <NE_EXPR>: Likewise. |
| (build_unary_op) <TRUTH_NOT_EXPR>: Likewise. |
| |
| 2010-10-10 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (gnat_to_gnu_entity) <E_Subprogram_Type>: Add |
| assertion on the types of the parameters. Use KIND local variable. |
| <E_Incomplete_Type>: Likewise. |
| |
| 2010-10-10 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/ada-tree.h (DECL_BY_DOUBLE_REF_P): New macro. |
| * gcc-interface/gigi.h (annotate_object): Add BY_DOUBLE_REF parameter. |
| * gcc-interface/decl.c (annotate_object): Likewise and handle it. |
| (gnat_to_gnu_entity): Adjust calls to annotate_object. |
| (gnat_to_gnu_param): If fat pointer types are passed by reference on |
| the target, pass them by explicit reference. |
| * gcc-interface/misc.c (default_pass_by_ref): Fix type of constant. |
| * gcc-interface/trans.c (Identifier_to_gnu): Do DECL_BY_DOUBLE_REF_P. |
| (Subprogram_Body_to_gnu): Adjust call to annotate_object. |
| (call_to_gnu): Handle DECL_BY_DOUBLE_REF_P. |
| * gcc-interface/utils.c (convert_vms_descriptor): Add BY_REF parameter |
| and handle it. |
| (build_function_stub): Iterate on the parameters of the subprogram in |
| lieu of on the argument types. Adjust call to convert_vms_descriptor. |
| |
| 2010-10-09 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/misc.c: Delete prototypes. |
| (gnat_init_options): Use local variable. |
| (lang_hooks): Move to the end of the file. |
| |
| 2010-10-08 Joseph Myers <joseph@codesourcery.com> |
| |
| * gcc-interface/misc.c (gnat_init_options_struct): New. Split out |
| from gnat_init_options. |
| (LANG_HOOKS_INIT_OPTIONS_STRUCT): Define. |
| |
| 2010-10-08 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_aux.adb: Cleanup Is_Immutably_Limited_Type. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch3.adb: Minor reformatting. |
| * exp_ch5.adb: Add comment. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_prag.adb (Check_Duplicate_Pragma): Check for entity match |
| * gcc-interface/Make-lang.in: Update dependencies. |
| * einfo.ads: Minor reformatting. |
| |
| 2010-10-08 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch5.adb, sem_ch3.adb, exp_ch7.adb, exp_util.adb, sem_aux.adb, |
| sem_aux.ads, exp_ch4.adb, exp_ch6.adb, sem_ch6.adb, exp_aggr.adb, |
| exp_ch3.adb: Change Is_Inherently_Limited_Type to |
| Is_Immutably_Limited_Type to accord with new RM terminology. |
| * sem_aux.adb (Is_Immutably_Limited_Type): A type that is a descendant |
| of a formal limited private type is not immutably limited in a generic |
| body. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_prag.adb (Check_Duplicate_Pragma): New procedure |
| Add calls to this new procedure where appropriate |
| |
| 2010-10-08 Vincent Celier <celier@adacore.com> |
| |
| * a-textio.adb (Get_Chunk): Code clean up. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * a-strbou.ads, a-strfix.adb, a-strfix.ads, a-strsea.adb, a-strsea.ads, |
| a-strsup.adb, a-strsup.ads, a-strunb-shared.adb, a-strunb-shared.ads, |
| a-strunb.adb, a-strunb.ads, a-stwibo.ads, a-stwifi.adb, a-stwifi.ads, |
| a-stwise.adb, a-stwise.ads, a-stwisu.adb, a-stwisu.ads, |
| a-stwiun-shared.adb, a-stwiun-shared.ads, a-stwiun.adb, a-stwiun.ads, |
| a-stzbou.ads, a-stzfix.adb, a-stzfix.ads, a-stzsea.adb, a-stzsea.ads, |
| a-stzsup.adb, a-stzsup.ads, a-stzunb-shared.adb, a-stzunb-shared.ads, |
| a-stzunb.adb, a-stzunb.ads (Find_Token): New version with From |
| parameter. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_cat.adb (Check_Categorization_Dependencies): Remote types |
| packages can depend on preleborated packages. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_prag.adb (Check_Interrupt_Or_Attach_Handler): Pragmas |
| Interrupt_Handler and Attach_Handler not allowed in generics. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * ali.adb: Set Allocator_In_Body if AB parameter present on M line |
| * ali.ads (Allocator_In_Body): New flag |
| * bcheck.adb (Check_Consistent_Restrictions): Handle case of main |
| program violating No_Allocators_After_Elaboration restriction. |
| * gnatbind.adb (No_Restriction_List): Add entries for |
| No_Anonymous_Allocators, and No_Allocators_After_Elaboration. |
| * lib-load.adb: Initialize Has_Allocator flag |
| * lib-writ.adb: Initialize Has_Allocator flag |
| (M_Parameters): Set AB switch if Has_Allocator flag set |
| * lib-writ.ads: Document AB flag on M line |
| * lib.adb (Has_Allocator): New function |
| (Set_Has_Allocator): New procedure |
| * lib.ads (Has_Allocator): New function |
| (Set_Has_Allocator): New procedure |
| (Has_Allocator): New flag in Unit_Record |
| * sem_ch4.adb (Analyze_Allocator): Add processing for |
| No_Allocators_After_Elaboration. |
| |
| 2010-10-08 Geert Bosch <bosch@adacore.com> |
| |
| * a-textio.adb (Get_Line): Rewrite to use fgets instead of fgetc. |
| |
| 2010-10-08 Javier Miranda <miranda@adacore.com> |
| |
| * sem_prag.adb (Analyze_Pragma): Relax semantic rule of |
| Java_Constructors because in the JRE library we generate occurrences |
| in which the "this" parameter is not the first formal. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch3.adb: Minor reformatting. |
| |
| 2010-10-08 Javier Miranda <miranda@adacore.com> |
| |
| * exp_disp.adb (Make_DT): Do not generate dispatch tables for CIL/Java |
| types. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch8.adb (P_Use_Type_Clause): Recognize ALL keyword in Ada 2012 |
| mode. |
| * sinfo.adb (Use_Type_Clause): Add All_Present flag. |
| * sinfo.ads (Use_Type_Clause): Add All_Present flag. |
| * s-rident.ads: Add entry for No_Allocators_After_Elaboration, |
| No_Anonymous_Allocators. |
| |
| 2010-10-08 Vincent Celier <celier@adacore.com> |
| |
| * bindgen.adb (Gen_Restrictions_Ada): No new line after last |
| restriction, so that the last comma is always replaced with a left |
| parenthesis. |
| |
| 2010-10-08 Javier Miranda <miranda@adacore.com> |
| |
| * sem_prag.adb (Analyze_Pragma): Add specific check on the type of the |
| first formal of delegates. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_aggr.adb: Minor reformatting. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * exp_imgv.adb (Expand_Image_Attribute): Handle special calling |
| sequence for soft hyphen for Character'Image case. |
| * rtsfind.ads (Image_Character_05): New entry |
| * s-imgcha.adb (Image_Character_05): New procedurew |
| * s-imgcha.ads (Image_Character_05): New procedure |
| * s-imgwch.adb (Image_Wide_Character): Deal with Ada 2005 soft hyphen |
| case. |
| * s-valcha.adb (Value_Character): Recognize SOFT_HYPHEN for 16#AD# |
| * sem_attr.adb (Eval_Attribute, case Width): Handle soft_hyphen name |
| properly. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_attr.adb (Eval_Attribute, case Width): Avoid ludicrous long loop |
| for case of Wide_[Wide_]Character. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch3.adb: Minor reformating |
| Minor code reorganization. |
| |
| 2010-10-08 Javier Miranda <miranda@adacore.com> |
| |
| * sem_prag.adb (Analyze_Pragma): Add missing checks on wrong use of |
| pragmas CIL_Constructor and Java_Constructor. |
| * exp_ch3.adb (Expand_Freeze_Record_Type): Do not generate the |
| predefined primitives for CIL/Java tagged types. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch6.adb: Minor reformatting. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * gnat1drv.adb: Add call to Validate_Independence. |
| * par-prag.adb: Add dummy entries for Independent, |
| Independent_Componentsa. |
| * sem_ch13.adb (Validate_Independence): New procedure |
| (Initialize): Initialize address clause and independence check tables |
| * sem_ch13.ads (Independence_Checks): New table |
| (Validate_Independence): New procedure |
| * sem_prag.adb: Add processing for pragma Independent[_Components] |
| * snames.ads-tmpl: Add entries for pragma Independent[_Components] |
| |
| 2010-10-08 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_aggr.adb (Propagate_Discriminants): When expanding an aggregate |
| component with box initialization, if the component is a variant record |
| use the values of the discriminants to select the proper variant for |
| further box initialization. |
| |
| 2010-10-08 Thomas Quinot <quinot@adacore.com> |
| |
| * xsnames.adb: Remove obsolete file. |
| * make.adb, sem_ch8.adb, einfo.ads: Minor reformatting. |
| |
| 2010-10-08 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_aggr.adb: Complete previous change. |
| |
| 2010-10-08 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch6.adb (Check_Return_Subtype): The subtype indication in an |
| extended return must match statically the return subtype of the |
| enclosing function if the type is an elementary type or if it is |
| constrained. |
| |
| 2010-10-08 Vincent Celier <celier@adacore.com> |
| |
| * prj-nmsc.adb (Add_Source): Report all duplicate units and source file |
| names. Do not report the same duplicate unit several times. |
| * prj.ads (Source_Data): New Boolean component Duplicate_Unit, |
| defaulted to False, to avoid reporting the same unit as duplicate |
| several times. |
| |
| 2010-10-08 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_aggr.adb (Resolve_Array_Aggregate): If the expression in an |
| others choice is a literal, analyze it to enable later optimizations. |
| * exp_aggr.adb (Expand_Record_Aggregate): An aggregate with static size |
| and components can be handled by the backend even if it is of a limited |
| type. |
| |
| 2010-10-08 Arnaud Charlet <charlet@adacore.com> |
| |
| * a-rttiev.adb (task Timer): Since this package may be elaborated |
| before System.Interrupt, we need to call Setup_Interrupt_Mask |
| explicitly to ensure that this task has the proper signal mask. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * freeze.adb (Freeze_Entity): For array case, move some processing for |
| pragma Pack, Component_Size clause and atomic/volatile components here |
| instead of trying to do the job in Sem_Ch13 and Freeze. |
| * layout.adb: Use new Addressable function |
| * sem_ch13.adb (Analyze_Attribute_Representation_Clause, case |
| Component_Size): Move some handling to freeze point in |
| Freeze.Freeze_Entity. |
| * sem_prag.adb (Analyze_pragma, case Pack): Move some handling to |
| freeze point in Freese.Freeze_Entity. |
| * sem_util.ads, sem_util.adb (Addressable): New function. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sprint.adb: Minor reformatting. |
| |
| 2010-10-08 Javier Miranda <miranda@adacore.com> |
| |
| * exp_ch4.adb (Real_Range_Check): Declare temporary as constant. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch3.adb: Minor reformatting. |
| |
| 2010-10-08 Vincent Celier <celier@adacore.com> |
| |
| * ali-util.adb (Get_File_Checksum): Make sure that external_as_list is |
| not a reserved word. |
| * prj-proc.adb (Expression): Process string list external references. |
| * prj-strt.adb (External_Reference): Parse external_as_list external |
| references. |
| * prj-tree.ads (Expression_Kind_Of): Allowed for N_External_Value nodes |
| (Set_Expression_Kind_Of): Ditto |
| * prj.adb (Initialize): Set external_as_list as a reserved word |
| * projects.texi: Document new string external reference |
| external_as_list. |
| * scans.ads (Token_Type): New token Tok_External_As_List |
| * snames.ads-tmpl: New standard name Name_External_As_List |
| |
| 2010-10-08 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_prag.adb: Minor reformatting. |
| |
| 2010-10-08 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch3.adb (Derived_Type_Declaration): In the private part of an |
| instance, it is legal to derive from a non-limited actual when the |
| formal type is untagged limited. |
| * sem_ch12.adb (Instantiate_Type): For a formal private type, use |
| analyzed formal as Generic_Parent_Type, to simplify later checks. |
| |
| 2010-10-08 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_res.adb (Insert_Default): If default value is already a |
| raise_constraint_error do not rewrite it as new raise node, to prevent |
| infinite loops in the warning removal machinery. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_util.adb, sem_prag.adb: Minor reformatting |
| |
| 2010-10-08 Hristian Kirtchev <kirtchev@adacore.com> |
| |
| * gnat_rm.texi: Remove the section on pragma Implemented_By_Entry. |
| Add section on pragma Implemented. |
| |
| 2010-10-08 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch3.adb (Derive_Subprogram): If an abstract extension has a |
| concrete parent with a concrete constructor, the inherited constructor |
| is abstract even if the derived type is a null extension. |
| |
| 2010-10-08 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_ch4.adb: Minor reformatting. |
| |
| 2010-10-08 Hristian Kirtchev <kirtchev@adacore.com> |
| |
| * einfo.adb: Flag 232 (formerly Implemented_By_Entry) is now unused. |
| (Implemented_By_Entry): Removed. |
| (Set_Implemented_By_Entry): Removed. |
| (Write_Entity_Flags): Remove the output for Implemented_By_Entry. |
| * einfo.ads: Remove Implemented_By_Entry and its usage in entities. |
| (Implemented_By_Entry): Removed along with its associated pragma. |
| (Set_Implemented_By_Entry): Removed along with its associated pragma. |
| * exp_ch9.adb: Alphabetize with and use clauses of Exp_Ch9. |
| (Build_Dispatching_Call_Equivalent): New routine. |
| (Build_Dispatching_Requeue): New routine. |
| (Build_Dispatching_Requeue_To_Any): New routine. |
| (Build_Normal_Requeue): New routine. |
| (Build_Skip_Statement): New routine. |
| (Expand_N_Requeue_Statement): Rewritten. The logic has been split into |
| several subroutines. |
| * par-prag.adb: Replace Pragma_Implemented_By_Entry by |
| Pragma_Implemented. |
| * sem_ch3.adb (Check_Abstract_Overriding): Perform checks concerning |
| pragma Implemented. |
| (Check_Pragma_Implemented): New routines. |
| (Inherit_Pragma_Implemented): New routine. |
| * sem_ch9.adb (Analyze_Requeue): Update the predicate which detects a |
| dispatching requeue. |
| * sem_prag.adb: Update array Sig_Flags by removing Implemented_By_Entry |
| and adding Implemented. |
| (Ada_2012_Pragma): New routine. |
| (Analyze_Pragma, case Implemented): Perform all necessary checks |
| concerning pragma Implemented and register the pragma as a |
| representation item with the procedure_LOCAL_NAME. |
| (Analyze_Pragma, case Implemented_By_Entry): Removed. |
| * sem_util.adb (Implementation_Kind): New routine. |
| * sem_util.ads (Implementation_Kind): New routine. |
| * snames.ads-tmpl: Remove Name_Implemented_By_Entry and add |
| Name_Implemented. Remove pragma name Pragma_Implemented_By_Entry and |
| add Pragma_Implemented. Add special names By_Any, By_Entry and |
| By_Protected_Procedure. |
| |
| 2010-10-08 Javier Miranda <miranda@adacore.com> |
| |
| * exp_ch3.adb (Expand_Freeeze_Record_Type): Code cleanup: remove local |
| variable Has_Static_DT by invocation of function Building_Static_DT. |
| |
| 2010-10-08 Vincent Celier <celier@adacore.com> |
| |
| * g-dirope.adb (Remove_Dir): Do not change the current directory when |
| doing a recursive remove of a subdirectory. |
| |
| 2010-10-08 Javier Miranda <miranda@adacore.com> |
| |
| * exp_ch6.ad (Freeze_Subprogram): Factorize code. |
| * exp_disp.adb (Make_Secondary_DT): Factorize code. |
| (Make_DT): Factorize code. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch4.adb: Minor reformatting. |
| |
| 2010-10-08 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch6.adb (Check_Conformance): Check null exclusion match for full |
| conformance. |
| |
| 2010-10-08 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_ch12.adb (Instantiate_Object): Rename Formal_Id to Gen_Obj, for |
| consistency with Gen_T in Instantiate_Type. |
| Introduce constant A_Gen_Obj to avoid repeated queries for |
| Defining_Identifier (Analyzed_Formal). |
| |
| 2010-10-08 Vincent Celier <celier@adacore.com> |
| |
| * prj-nmsc.adb: Minor comment fix. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * sem_prag.adb, sem_ch13.adb: Implement AI05-0012-1/02. |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch12.ad: (Instantiate_Object): For an in-out formal of a child |
| unit, if the type of the formal is declared in a parent unit and is not |
| a formal itself, the actual must be located from an enclosing parent |
| instance by normal visibility. |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch4.adb (Analyze_Allocator): In Ada 2012, a null_exclusion |
| indicator is illegal for an uninitialized allocator. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * sem_prag.adb (Analyze_Attribute_Definition_Clause, case |
| Component_Size): Complete previous change. |
| |
| 2010-10-07 Vincent Celier <celier@adacore.com> |
| |
| * scng.adb (Scan): Call Accumulate_Token_Checksum for Tok_Identifier, |
| even for keywords, to avoid having the checksum to depend on the Ada |
| version. |
| |
| 2010-10-07 Gary Dismukes <dismukes@adacore.com> |
| |
| * sem_aggr.adb, sem_ch12.adb, sem_ch6.adb, par-ch5.adb, |
| exp_ch3.adb: Minor reformatting. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch13.adb (Analyze_Attribute_Definition_Clause, case |
| Component_Size): It is now illegal to give an incorrect component size |
| clause in the case of aliased or atomic components. |
| * sem_prag.adb (Analyze_Pragma, case Pack): It is now illegal to give |
| an effective pragma Pack in the case of aliased or atomic components. |
| |
| 2010-10-07 Steve Baird <baird@adacore.com> |
| |
| * exp_ch4.adb (Expand_N_Allocator): Do not bypass expansion |
| in the case of a violation of an active No_Task_Hierarchy restriction. |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch12.adb (Validate_Derived_Type_Instance): If a formal derived |
| type is non-limited, an actual for it cannot be limited. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * einfo.ads (No_Pool_Assigned): Update documentation. |
| * sem_ch13.adb (Analyze_Attribute_Definition_Clause, case |
| Storage_Size): We only set No_Pool_Assigned if the expression is a |
| static constant and zero. |
| * sem_res.adb (Resolve_Allocator): Allocation from empty storage pool |
| should be an error not a warning. |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_aggr.adb (Expand_Array_Aggregate): Recognize additional cases |
| where an aggregate in an assignment can be built directly into the |
| target, and does not require the creation of a temporary that may |
| overflow the stack. |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_aggr.adb (Analyze_Record_Aggregate): In Ada2012, a choice list |
| in a record aggregate can correspond to several components of |
| anonymous access types, as long as the designated subtypes match. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * gnat_rm.texi, exp_util.adb, sinfo.adb, sinfo.ads, sem_ch12.adb, |
| sem.adb, gnat_ugn.texi, sem_util.ads, par-ch6.adb, targparm.ads, |
| restrict.adb, sem_ch6.adb, sem_ch6.ads, sprint.adb, i-c.ads: Change |
| spelling parametrize(d) => parameterize(d). |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch12.adb: Add comment. |
| * sem_ch6.adb: Minor reformatting. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch3.adb, par-ch6.adb, par-ch7.adb, par-ch9.adb, par-ch10.adb: Add |
| Pexp to Pf_Rec constants |
| (P_Subprogram): Expression is always enclosed in parentheses |
| * par.adb (Pf_Rec): add Pexp flag for parametrized expression |
| * sinfo.ads (N_Parametrized_Expression): Expression must be in parens |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch6.adb (Analyze_Subprogram_Specification): Implement Ada2012 |
| checks on functions that return an abstract type or have a controlling |
| result whose designated type is an abstract type. |
| (Check_Private_Overriding): Implement Ada2012 checks on functions |
| declared in the private part, if an abstract type is involved. |
| * sem_ch12.adb (Analyze_Generic_Subprogram_Declaration): In Ada2012, |
| reject a generic function that returns an abstract type. |
| * exp_ch5.adb (Expand_Simple_Function_Return): in Ada2012, if a |
| function has a controlling access result, check that the tag of the |
| return value matches the designated type of the return expression. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch6.adb: Fix error in handling of parametrized expressions. |
| * par-ch4.adb (P_Name): Allow qualified expression as name in Ada 2012 |
| mode. |
| (P_Simple_Expression): Better message for qualified expression prefix |
| * s-crc32.adb: Minor reformatting. |
| * exp_intr.adb (Expand_Unc_Deallocation): Remove test for empty |
| storage pool (this test is moved to Sem_Intr). |
| * sem_intr.adb (Check_Intrinsic_Call): Add check for deallocation from |
| empty storage pool, moved here from Exp_Intr and made into error. |
| (Check_Intrinsic_Call): Remove assumption in generating not-null free |
| warning that the name of the instantiation is Free. |
| * sinput.adb (Tree_Read): Document use of illegal free call allowed in |
| GNAT mode. |
| * types.ads: Remove storage size clauses from big types (since we may |
| need to do deallocations, which are now illegal for empty pools). |
| |
| 2010-10-07 Sergey Rybin <rybin@adacore.com> |
| |
| * gnat_ugn.texi: Add missing word. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * exp_util.adb (Insert_Actions): Add handling of |
| N_Parametrized_Expression. |
| * par-ch6.adb (P_Subprogram): Add parsing of parametrized expression |
| * sem.adb: Add entry for N_Parametrized_Expression |
| * sem_ch6.adb (Analyze_Parametrized_Expression): New procedure |
| * sem_ch6.ads (Analyze_Parametrized_Expression): New procedure |
| * sinfo.ads, sinfo.adb: Add N_Parametrized_Expression |
| * sprint.adb (Sprint_Node): Add handling for N_Parametrized_Expression |
| * par-ch4.adb: Minor reformatting. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * scng.adb (Skip_Other_Format_Characters): New procedure |
| (Start_Of_Wide_Character): New procedure |
| (Scan): Use Start_Of_Wide_Character where appropriate |
| (Scan): Improve error message for other_format chars in identifier |
| (Scan): Allow other_format chars between tokens |
| |
| 2010-10-07 Javier Miranda <miranda@adacore.com> |
| |
| * exp_util.adb (Safe_Prefixed_Reference): When removing side effects, |
| Add missing support for explicit dereferences. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch10.adb, par-ch3.adb, par.adb: Minor reformatting. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * exp_disp.adb, exp_dist.adb, exp_util.ads, exp_util.adb, |
| exp_ch11.adb: Rename Full_Qualified_Name to Fully_Qualified_Name_String |
| * sem_util.adb, sem_util.ads (Full_Qualified_Name): Moved to |
| Exp_Util.Fully_Qualified_Name_String. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * rtsfind.ads: Add entry for Ada.Real_Time.Timing_Events.Set_Handler |
| * sem_res.adb (Resolve_Call): A call to |
| Ada.Real_Time.Timing_Events.Set_Handler violates restriction |
| No_Relative_Delay (AI-0211). |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch10.adb: Small change in error message. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * tbuild.ads: Minor reformatting. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * gnatcmd.adb, make.adb, prj-nmsc.adb, sem_elab.adb: Minor reformatting |
| |
| 2010-10-07 Arnaud Charlet <charlet@adacore.com> |
| |
| * exp_ch11.adb (Expand_N_Exception_Declaration): Update comments. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * sem_res.adb: Minor reformatting |
| |
| 2010-10-07 Olivier Ramonat <ramonat@adacore.com> |
| |
| * gnat_ugn.texi: Minor editing. |
| * opt.ads: Document that scripts rely on specific formats in opt.ads |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * a-wichun.ads, a-wichun.adb (To_Lower_Case): New function |
| (To_Upper_Case): Fix to be inverse of To_Lower_Case |
| * a-zchuni.ads, a-zchuni.adb (To_Lower_Case): New function |
| (To_Upper_Case): Fix to be inverse of To_Lower_Case |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * a-wichha.adb, a-wichha.ads, a-zchhan.adb, a-zchhan.ads: New file. |
| * impunit.adb: Add entries for a-wichha/a-zchhan |
| * Makefile.rtl: Add entries for a-wichha/a-zchhan |
| |
| 2010-10-07 Vincent Celier <celier@adacore.com> |
| |
| * make.adb (Check): Call Check_Source_Info_In_ALI with Project_Tree |
| * makeutl.adb (Check_Source_Info_In_ALI): If there is at least one |
| replaced source, check that none of the replaced sources are in the |
| dependencies. |
| * makeutl.ads (Check_Source_Info_In_ALI): New parameter Tree |
| * prj-nmsc.adb (Remove_Source): New parameter Tree. If the source is |
| replaced with a source with a different file name, put it in the hash |
| table Replaced_Sources. |
| (Add_Source): Call Remove_Source with Data.Tree. If there is at least |
| one replaced source, check if it has the same file name as the current |
| source; if it has, remove it from the hash table Replaced_Sources. |
| * prj.adb (Reset): Reset hash table Tree.Replaced_Sources |
| * prj.ads (Replaced_Source_HTable): New hash table |
| (Project_Tree_Data): New components Replaced_Sources and |
| Replaced_Source_Number. |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_elab.adb (Check_A_Call): After inserting elaboration check, set |
| proper flag to prevent a double elaboration check on the same call. |
| * exp_util.adb (Insert_Actions): If the enclosing node is an |
| Expression_With_Actions and it has been analyzed already, find |
| insertion point further up in the tree. |
| |
| 2010-10-07 Hristian Kirtchev <kirtchev@adacore.com> |
| |
| * sem_ch13.adb (Analyze_Record_Representation_Clause): Alphabetize all |
| local variables. Remove the general restriction which prohibits the |
| application of record rep clauses to Unchecked_Union types. Add Ada |
| 2012 check to detect improper naming of an Unchecked_Union |
| discriminant in record rep clause. |
| * sem_prag.adb: Add with and use clause for Exp_Ch7. |
| (Analyze_Pragma): Unchecked_Union case: Propagate the Unchecked_Union |
| type to all invocations of Check_Component and Check_Variant. |
| (Check_Component): Add formal parameters UU_Typ and In_Variant_Part. |
| Rewritten. Add Ada 2012 check to detect improper use of formal |
| private types and private extensions as component types of an |
| Unchecked_Union declared inside a generic body. |
| (Check_Variant): Add formal parameter UU_Typ. Propagate the |
| Unchecked_Union type to all calls of Check_Component. Signal that the |
| current component comes from the variant part of an Unchecked_Union |
| type. |
| (Inside_Generic_Body): New routine. |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch4.adb (Expand_Composite_Equality): When looking for a primitive |
| equality operation for a record component, verify that both formals |
| have the same type, and the result type is boolean. |
| |
| 2010-10-07 Vincent Celier <celier@adacore.com> |
| |
| * gnatcmd.adb (Check_Files): When looking for the .ci file for a |
| binder generated file, look for both b~xxx and b__xxx as gprbuild |
| always uses b__ as the prefix of such files. |
| |
| 2010-10-07 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_res.adb: Minor reformatting. |
| |
| 2010-10-07 Arnaud Charlet <charlet@adacore.com> |
| |
| * debug.adb: Update -gnatd.J documentation. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * gnat_rm.texi: Document handling of invalid values |
| * s-utf_32.ads, s-utf_32.adb (UTF_To_Lower_Case): Fix implementation |
| to match new spec. |
| (UTF_To_Upper_Case): New function. |
| |
| 2010-10-07 Robert Dewar <dewar@adacore.com> |
| |
| * sem_attr.adb: Minor reformatting. |
| * einfo.ads, einfo.adb (Is_Ada_2012_Only): New flag |
| * itypes.adb (Create_Null_Excluding_Itype): Set Is_Ada_2012_Only flag |
| properly. |
| * lib-xref.adb (Generate_Reference): Warn on use of Ada 2012 entity in |
| non-Ada 2012 mode. |
| * opt.ads (Warn_On_Ada_2012_Compatibility): New flag |
| * sem_ch3.adb (Analye_Subtype_Declaration): Inherit Is_Ada_2012_Only |
| * sem_ch7.adb (Preserve_Full_Attributes): Preserve Is_Ada_2012_Only |
| flag. |
| * sem_prag.adb (Analyze_Pragma, case Ada_12/Ada_2012): Allow form with |
| argument. |
| * sem_type.adb (Disambiguate): Deal with Is_Ada_2012_Only. |
| * sem_warn.adb (Warn_On_Ada_2012_Compatibility): New flag, treated |
| same as 2005 flag. |
| |
| 2010-10-07 Javier Miranda <miranda@adacore.com> |
| |
| * a-tags.ads: Use new support for pragma Ada_2012 with function |
| Type_Is_Abstract. |
| |
| 2010-10-07 Ed Schonberg <schonberg@adacore.com> |
| |
| * par-ch5.adb (P_Sequence_Of_Statements): In Ada2012 a label can end a |
| sequence of statements. |
| |
| 2010-10-07 Vincent Celier <celier@adacore.com> |
| |
| * gnatcmd.adb (Check_Files): Only add a .ci files if it exists |
| |
| 2010-10-07 Javier Miranda <miranda@adacore.com> |
| |
| * a-tags.ads, a-tags.adb (Type_Is_Abstract): New subprogram. |
| * rtsfind.ads (RE_Type_Is_Abstract): New entity. |
| * exp_disp.adb (Make_DT): Initialize TSD component Type_Is_Abstract. |
| |
| 2010-10-07 Arnaud Charlet <charlet@adacore.com> |
| |
| * sem_ch12.adb (Mark_Context): Removed, no longer needed. |
| (Analyze_Package_Instantiation): No longer analyze systematically a |
| generic body in CodePeer mode. |
| * freeze.adb, sem_attr.adb: Update comments. |
| |
| 2010-10-05 Robert Dewar <dewar@adacore.com> |
| |
| * par-ch5.adb (Test_Statement_Required): Allow all pragmas in Ada 2012 |
| mode. |
| |
| 2010-10-05 Pascal Obry <obry@adacore.com> |
| |
| * gnat_rm.texi: Fix typo. |
| |
| 2010-10-05 Arnaud Charlet <charlet@adacore.com> |
| |
| * gnat_ugn.texi: Add note about identifiers with same name and |
| -fdump-ada-spec. |
| |
| 2010-10-05 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch4.adb: Minor reformatting. |
| * a-direct.ads: Minor comment update. |
| |
| 2010-10-05 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch3.adb (Add_Internal_Interface_Entities): Removing code that is |
| no longer required after change in New_Overloaded_Entity. |
| * sem_ch6.adb (New_Overloaded_Entity): Code reorganization to isolate |
| the fragment of code that handles derivations of interface primitives. |
| Add missing dependence on global variable Inside_Freezing_Actions to |
| ensure the correct management of internal interface entities. |
| * sem_ch13.adb (Analyze_Freeze_Entity): Add missing increase/decrease |
| of the global variable Inside_Freezing_Actions to ensure that internal |
| interface entities are well handled by New_Overloaded_Entity. |
| * sem_disp.adb (Find_Primitive_Covering_Interface): Add documentation |
| and complete the algorithm to catch hidden primitives derived of |
| private type that covers the interface. |
| * sem_disp.ads (Find_Primitive_Covering_Interface): Add missing |
| documentation. |
| |
| 2010-10-05 Robert Dewar <dewar@adacore.com> |
| |
| * prj-util.adb, prj-util.ads, prj.ads, s-vxwext-rtp.adb, sem_ch4.adb, |
| sem_ch7.adb, sem_res.adb, sem_type.adb: Minor reformatting. |
| Minor code reorganization (use Nkind_In). |
| |
| 2010-10-05 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch10.adb (Analyze_Task_Body_Stub): Diagnose duplicate stub for |
| task. |
| |
| 2010-10-05 Vincent Celier <celier@adacore.com> |
| |
| * gnatbind.adb: If the main library file is not for a suitable main |
| program, change the error message. |
| |
| 2010-10-05 Vincent Celier <celier@adacore.com> |
| |
| * a-direct.ads: Minor spelling error fixes in comments. |
| * gnat_rm.texi: Add three entries in "Implementation Defined |
| Characteristics" for the interpretations of the Form parameters in |
| Ada.Directories. |
| |
| 2010-10-05 Robert Dewar <dewar@adacore.com> |
| |
| * exp_ch3.adb, exp_ch5.adb, exp_disp.adb, exp_dist.adb, gnatlink.adb, |
| makeutl.adb, par-ch6.adb, prj-dect.adb, prj-env.adb, prj-env.ads, |
| prj-ext.adb, prj-nmsc.adb, prj-part.adb, prj-pp.ads: Minor code |
| reorganization. |
| Minor reformatting. |
| |
| 2010-10-05 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_res.adb (Check_Parameterless_Call): If the prefix of 'Address is |
| an explicit dereference of an access to function, the prefix is not |
| interpreted as a parameterless call. |
| |
| 2010-10-05 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_attr.adb: For 'Read and 'Write, use full view of base type if |
| private. |
| |
| 2010-10-05 Vincent Celier <celier@adacore.com> |
| |
| * make.adb (Switches_Of): Allow wild cards in index of attributes |
| Switches. |
| * prj-util.adb (Value_Of): When Allow_Wildcards is True, use the index |
| of the associative array as a glob regular expression. |
| * prj-util.ads (Value_Of (Index, In_Array)): New Boolean parameter |
| Allow_Wildcards, defaulted to False. |
| (Value_Of (Name, Attribute_Or_Array_Name)): Ditto |
| * projects.texi: Document that attribute Switches (<file name>) may |
| use wild cards in the index. |
| |
| 2010-10-05 Robert Dewar <dewar@adacore.com> |
| |
| * a-direct.adb, a-direct.ads, back_end.adb, checks.adb, |
| einfo.adb: Minor reformatting. |
| * debug.adb: Remove obsolete documentation for d.Z flag. |
| |
| 2010-10-05 Vincent Celier <celier@adacore.com> |
| |
| * vms_data.ads: Add VMS qualifier /SRC_INFO= corresponding to gnatmake |
| switch --create-info-file=. |
| * gnat_ugn.texi: Add documentation for new gnatmake switch |
| --source-info= |
| |
| 2010-10-05 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch3.adb: Do not elaborate type definition if syntax error. |
| |
| 2010-10-05 Javier Miranda <miranda@adacore.com> |
| |
| * sprint.adb (Sprint_Node_Actual): Improve output of subprogram bodies |
| to generate the full-qualified names of its corresponding spec. |
| This facilitates locating the corresponing body when reading |
| the DG output. |
| |
| 2010-10-05 Thomas Quinot <quinot@adacore.com> |
| |
| * exp_dist.adb (Make_Helper_Function_Name): For a tagged type, use |
| canonical name without serial number only if the helper is becoming a |
| primitive of the type. |
| |
| 2010-10-05 Javier Miranda <miranda@adacore.com> |
| |
| * exp_disp.adb (Make_DT): Minor code reorganization. |
| |
| 2010-10-05 Ed Schonberg <schonberg@adacore.com> |
| |
| * par-ch6.adb: improve recovery with extra paren in function spec. |
| |
| 2010-10-05 Quentin Ochem <ochem@adacore.com> |
| |
| * prj-tree.ads: Project_Path is now aliased. |
| |
| 2010-10-05 Thomas Quinot <quinot@adacore.com> |
| |
| * checks.adb: Minor reformatting. |
| |
| 2010-10-05 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * mlib-tgt-specific-mingw.adb (No_Argument_List): Delete. |
| (Shared_Libgcc): New aliased variable. |
| (Shared_Libgcc_Switch): New constant. |
| (Build_Dynamic_Library): Pass Shared_Libgcc_Switch to the compiler |
| * gcc-interface/Makefile.in (gnatlib-shared-win32): Pass -shared-libgcc |
| to the compiler. |
| * gcc-interface/Make-lang.in: Update dependencies. |
| |
| 2010-10-05 Vincent Celier <celier@adacore.com> |
| |
| * prj-part.adb (Parse_Simple_Project): When checking if a child project |
| imports its parent project, also look in projects being extended by |
| imported projects. |
| |
| 2010-10-05 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gnat_ugn.texi: Adjust instructions in G.10 Building DLLs with GNAT. |
| |
| 2010-10-05 Javier Miranda <miranda@adacore.com> |
| |
| * exp_cg.adb (Slot_Number): Add support to handle aliased entities. |
| (Generate_CG_Output): Switch -gnatd.Z is no longer needed to |
| activate this output. |
| |
| 2010-10-05 Arnaud Charlet <charlet@adacore.com> |
| |
| * back_end.adb (Call_Back_End): Generate an error message when scil |
| generation is enabled, and no scil back-end (by default) is available. |
| |
| 2010-10-05 Javier Miranda <miranda@adacore.com> |
| |
| * debug.adb: Update documentation since -gnatd.Z is no longer required |
| to generate the call-graph information. |
| |
| 2010-10-05 Javier Miranda <miranda@adacore.com> |
| |
| * exp_ch5.adb (Expand_Simple_Function_Return): Rewrite expansion of a |
| runtime access check by an equivalent expansion that causes |
| no problems in the VM backend. The original expansion was |
| not good for the VM backends because when Tagged_Type_Expansion |
| is disabled the attribute Access_Disp_Table is not available. |
| |
| 2010-10-05 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_type.adb (Covers): In a dispatching context, T1 covers T2 if T2 |
| is class-wide and T1 is its specific type. |
| |
| 2010-10-05 Ed Schonberg <schonberg@adacore.com> |
| |
| * einfo.adb: Add guard to Is_String_Type to prevent cascaded errors. |
| |
| 2010-10-05 Vincent Celier <celier@adacore.com> |
| |
| * back_end.ads: Minor spelling error correction. |
| |
| 2010-10-05 Arnaud Charlet <charlet@adacore.com> |
| |
| * switch-c.adb, gnat1drv.adb (Scan_Front_End_Switches): Disable |
| warnings when -gnatC is specified here so that warnings can be |
| re-enabled explicitly. |
| (Adjust_Global_Switches): No longer suppress warnings. |
| |
| 2010-10-05 Vincent Celier <celier@adacore.com> |
| |
| * makeutl.adb: Minor reformatting. |
| |
| 2010-10-05 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch4.adb: add guard in Analyze_One_Call to prevent crash when a |
| non-discrete type appears as an actual in a call. |
| |
| 2010-10-05 Vincent Celier <celier@adacore.com> |
| |
| * make.adb (Scan_Make_Arg): Take into account new switch |
| --source-info=file. |
| * makeusg.adb: Add line for new switch --source-info=file. |
| * makeutl.ads (Source_Info_Option): New constant String for new builder |
| switch. |
| * prj-conf.adb: Put subprograms in alphabetical order |
| (Process_Project_And_Apply_Config): Read/write an eventual source info |
| file, if necessary. |
| * prj-nmsc.adb (Look_For_Sources.Get_Sources_From_Source_Info): New |
| procedure. |
| (Look_For_Sources): If a source info file was successfully read, get |
| the source data from the data read from the source info file. |
| * prj-util.adb (Source_Info_Table): New table |
| (Source_Info_Project_HTable): New hash table |
| (Create): New procedure |
| (Put (File), Put_Line): New procedures |
| (Write_Source_Info_File): New procedure |
| (Read_Source_Info_File): New procedure |
| (Initialize): New procedure |
| (Source_Info_Of): New procedure |
| (Next): New procedure |
| (Close): When file is an out file, fail if the buffer cannot be written |
| or if the file cannot be close successfully. |
| (Get_Line): Fail if file is an out file |
| * prj-util.ads (Create): New procedure |
| (Put (File), Put_Line): New procedures |
| (Write_Source_Info_File): New procedure |
| (Read_Source_Info_File): New procedure |
| (Source_Info_Data): New record type |
| (Source_Info_Iterator): New private type |
| (Initialize): New procedure |
| (Source_Info_Of): New procedure |
| (Next): New procedure |
| * prj.ads (Project_Tree_Data): New components Source_Info_File_Name and |
| Source_Info_File_Exists. |
| |
| 2010-10-05 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch4.adb: Fix typo. |
| |
| 2010-10-05 Thomas Quinot <quinot@adacore.com> |
| |
| * lib-writ.adb: Minor reformatting. |
| |
| 2010-10-05 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch3.adb (Access_Definition): Remove useless code. |
| |
| 2010-10-05 Emmanuel Briot <briot@adacore.com> |
| |
| * prj-env.adb, prj-env.ads (Set_Path): New subprogram. |
| (Deep_Copy): Removed, not used. |
| |
| 2010-10-05 Javier Miranda <miranda@adacore.com> |
| |
| * sem_ch3.adb (Add_Internal_Interface_Entities): Code reorganization: |
| move code that searches in the list of primitives of a tagged type for |
| the entity that will be overridden by user-defined routines. |
| * sem_disp.adb (Find_Primitive_Covering_Interface): Move here code |
| previously located in routine Add_Internal_Interface_Entities. |
| * sem_disp.ads (Find_Primitive_Covering_Interface): Update docs. |
| * sem_ch6.adb (New_Overloaded_Entity): Add missing check on |
| availability of attribute Alias. |
| |
| 2010-10-05 Ed Falis <falis@adacore.com> |
| |
| * s-taprop-vxworks.adb, s-osinte-vxworks.adb, s-osinte-vxworks.ads, |
| s-vxwext.ads, s-vxwext-kernel.ads, s-vxwext-rtp.adb, s-vxwext-rtp.ads: |
| Move definition of intContext to System.OS_Interface. |
| Add necessary variants in System.VxWorks.Extensions. |
| |
| 2010-10-05 Doug Rupp <rupp@adacore.com> |
| |
| * s-asthan-vms-alpha.adb: On VMS, a task using |
| pragma AST_Entry exhibits a memory leak when the task terminates |
| because the vector allocated for the AST interface is not freed. Fixed |
| by making the vector a controlled type. |
| |
| 2010-10-05 Emmanuel Briot <briot@adacore.com> |
| |
| * prj-nmsc.adb (Expand_Subdirectory_Pattern): Check that the prefix in |
| a "**" pattern properly exists, and report an error otherwise. |
| |
| 2010-10-05 Emmanuel Briot <briot@adacore.com> |
| |
| * prj-env.ads: Use GNAT.OS_Lib rather than System.OS_Lib. |
| |
| 2010-10-05 Emmanuel Briot <briot@adacore.com> |
| |
| * prj-nmsc.adb, prj-err.adb (Expand_Subdirectory_Pattern): New |
| subprogram. |
| Extract some code from Get_Directories, to share with the handling |
| of aggregate projects (for the Project_Files attributes) |
| |
| 2010-10-05 Emmanuel Briot <briot@adacore.com> |
| |
| * gnatcmd.adb, prj-proc.adb, prj-part.adb, prj-ext.adb, prj-ext.ads, |
| switch-m.adb, clean.adb, prj-nmsc.adb, prj-nmsc.ads, prj-env.adb, |
| prj-env.ads, prj-tree.adb, prj-tree.ads (Project_Search_Path): New |
| type. |
| |
| 2010-10-05 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * exp_ch5.adb (Make_Field_Expr): Revert previous change (removed). |
| |
| 2010-10-05 Emmanuel Briot <briot@adacore.com> |
| |
| * prj-dect.adb, prj-nmsc.adb, prj-attr.adb, snames.ads-tmpl |
| (Aggregate projects): added support for parsing aggregate projects. |
| In particular, check the presence and value of the new attributes |
| related to aggregate projects, ie Project_Files, Project_Path |
| and External. |
| (Check_Attribute_Allowed, Check_Package_Allowed, |
| Rename_Obsolescent_Attributes): new subprogram, extracting code |
| from existing subprogram to keep their sizes smaller. |
| (Check_Aggregate_Project, Check_Abstract_Project, |
| Check_Missing_Sources): new subprograms |
| (Check): remove comments that duplicated either the name of the |
| following subprogram call, or the comment on that subprogram. |
| * prj-part.adb (Check_Extending_All_Imports): New subprogram, extracted |
| from Parse_Single_Project. |
| (Check_Aggregate_Imports): new subprogram. |
| |
| 2010-10-05 Vincent Celier <celier@adacore.com> |
| |
| * make.adb (Check): When compiling with -gnatc, recompile if the ALI |
| file has not been generated for the current source, for example if it |
| has been generated for the spec, but we are compiling the body. |
| |
| 2010-10-05 Bob Duff <duff@adacore.com> |
| |
| * xgnatugn.adb: Remove unused procedure. |
| |
| 2010-10-04 Vincent Celier <celier@adacore.com> |
| |
| * a-direct.adb (Copy_File): Interpret the Form parameter and call |
| System.OS_Lib.Copy_File to do the work accordingly. Raise Use_Error if |
| the Form parameter contains an incorrect value for field preserve= or |
| mode=. |
| * a-direct.ads (Create_Directory, Create_Path): Indicate that the Form |
| parameter is ignored. |
| (Copy_File): Indicate the interpretation of the Form parameter. |
| |
| 2010-10-04 Vincent Celier <celier@adacore.com> |
| |
| * make.adb (Gnatmake): When there are no foreign languages declared and |
| a main in attribute Main of the main project does not exist or is a |
| source of another project, fail immediately before attempting |
| compilation. |
| |
| 2010-10-04 Javier Miranda <miranda@adacore.com> |
| |
| * exp_disp.ads (Convert_Tag_To_Interface): New function which must be |
| used to convert a node referencing a tag to a class-wide interface |
| type. |
| * exp_disp.adb (Convert_Tag_To_Interface): New function. |
| (Expand_Interface_Conversion): Replace invocation of |
| Unchecked_Conversion by new function Convert_Tag_To_Interface. |
| (Write_DT): Add support for null primitives. |
| * exp_ch3.adb (Expand_N_Object_Declaration): For tagged type objects, |
| cleanup code that handles interface conversions and avoid unchecked |
| conversion of referenced tag components. |
| * exp_ch5.adb (Expand_N_Assignment_Statement): Code cleanup. Avoid |
| unrequired conversions when generating a dispatching call to _assign. |
| * sprint.adb (Write_Itype): Fix wrong output of not null access itypes. |
| |
| 2010-10-04 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch4.adb (Expand_N_Op_Not): Handle properly both operands when the |
| parent is a binary boolean operation and the operand is an unpacked |
| array. |
| (Build_Boolean_Array_Proc_Call): If the operands are both negations, |
| the operands of the rewritten node are the operands of the negations, |
| not the negations themselves. |
| |
| 2010-10-04 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch13.adb (Set_Biased): New procedure, now used throughout, adds |
| name of entity to biased warning msg. |
| (Analyze_Enumeration_Representation_Clause): Remove attempt to use |
| biased rep (wrong and never worked anyway). |
| |
| 2010-10-04 Arnaud Charlet <charlet@adacore.com> |
| |
| * sem_elab.adb: Minor reformatting. |
| |
| 2010-10-04 Ed Schonberg <schonberg@adacore.com> |
| |
| * exp_ch4.adb (Expand_N_Null): Handle properly the case of a subtype of |
| an access_to_protected subprogram type, and convert null value into |
| corresponding aggregate. |
| |
| 2010-10-04 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gnat_ugn.texi: Clarify first point of 7.1.5 about pragma Inline. |
| |
| 2010-10-04 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * make.adb (Scan_Make_Arg): Pass -Oxxx switches to the linker as well. |
| * gnatlink.adb (Gnatlink): Filter out -Oxxx switches for CLI, RTX and |
| AAMP. |
| |
| 2010-10-04 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * sem_ch4.adb (Analyze_Indexed_Component_Form): Remove redundant test |
| for N_Operator_Symbol. |
| (Indicate_Name_And_Type): Likewise. |
| * sem_ch8.adb (Analyze_Subprogram_Renaming): Likewise. |
| * sem_res.adb (Resolve): Likewise. |
| * sem_type.adb (Add_One_Interp): Likewise. |
| (Disambiguate): Likewise. |
| |
| 2010-10-04 Vincent Celier <celier@adacore.com> |
| |
| * osint.adb (Read_Library_Info_From_Full): If object timestamp is less |
| than ALI file timestamp, return null. |
| |
| 2010-10-04 Vincent Celier <celier@adacore.com> |
| |
| * prj-makr.adb (Finalize): Invoke Pretty_Print with Max_Length of 79. |
| * prj-pp.adb (Pretty_Print): New parameter Max_Line_Length, that |
| replaces global constant with the same name. When a line is too long, |
| indent properly the next continuation line. |
| * prj-pp.ads (Pretty_Print): New parameter Max_Line_Length with a range |
| from 50 to 255, defaulted to 255, to indicate the maximum length of |
| lines in the project file. |
| |
| 2010-10-04 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * sem_ch7.adb (Analyze_Package_Body_Helper) <Has_Referencer>: New |
| Check_Subprogram_Ref function and Check_Subprogram_Refs instantiation |
| of Traverse_Func on it to look for subprogram references in a body. |
| Call Check_Subprogram_Refs on the body of inlined subprograms at the |
| outer level and keep clearing the Is_Public flag of subprograms as long |
| as it returns OK. Do not look at anything else than subprograms once |
| an inlined subprogram has been seen. |
| |
| 2010-10-04 Javier Miranda <miranda@adacore.com> |
| |
| * exp_cg.adb (Expand_N_Assignment_Statement): Restore tag check when |
| the target object is an interface. |
| * sem_disp.adb (Propagate_Tag): If the controlling argument is an |
| interface type then we generate an implicit conversion to force |
| displacement of the pointer to the object to reference the secondary |
| dispatch table associated with the interface. |
| |
| 2010-10-04 Robert Dewar <dewar@adacore.com> |
| |
| * sem_ch13.adb (Analyze_Enumeration_Representation_Clause): Set |
| Enumeration_Rep_Expr to point to the literal, not the identifier. |
| (Analyze_Enumeration_Representation_Clause): Improve error message for |
| size too small for enum rep value |
| (Analyze_Enumeration_Representation_Clause): Fix size test to use |
| proper size (RM_Size, not Esize). |
| |
| 2010-10-04 Robert Dewar <dewar@adacore.com> |
| |
| * s-taprop-vxworks.adb, sem_res.adb: Minor reformatting. |
| |
| 2010-10-04 Javier Miranda <miranda@adacore.com> |
| |
| * exp_cg.adb (Write_Call_Info): Code clean up. |
| |
| 2010-10-04 Arnaud Charlet <charlet@adacore.com> |
| |
| * s-taprop-mingw.adb (Create_Task): Initialize Thread_Id field to 0. |
| |
| 2010-10-04 Robert Dewar <dewar@adacore.com> |
| |
| * exp_cg.adb: Minor code reorganization |
| Minor reformatting. |
| * exp_ch5.adb, prj-nmsc.adb: Minor reformatting. |
| |
| 2010-10-04 Bob Duff <duff@adacore.com> |
| |
| * sem_res.adb (Resolve_Type_Conversion): If a type conversion is needed |
| to make a qualified expression into a name (syntax-wise), then do not |
| consider it redundant. |
| |
| 2010-10-04 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_warn.ads: Fix typo. |
| |
| 2010-10-04 Javier Miranda <miranda@adacore.com> |
| |
| * exp_cg.adb (Is_Predefined_Dispatching_Operation): Handle suffix in |
| TSS names. |
| (Write_Call_Info): Add missing support for renamed primitives. |
| |
| 2010-10-04 Thomas Quinot <quinot@adacore.com> |
| |
| * exp_ch5.adb (Make_Field_Expr): New subprogram, to factor duplicated |
| code between Make_Component_List_Assign and Make_Field_Assign. |
| |
| 2010-10-04 Vincent Celier <celier@adacore.com> |
| |
| * prj-nmsc.adb (Get_Directories): For non extending projects that |
| declare that they have no sources, do not create a non existing object |
| or exec directory if builder switch -p is used. |
| |
| 2010-10-04 Sergey Rybin <rybin@adacore.com> |
| |
| * gnat_ugn.texi (gnatcheck): Change the description of the report file |
| format. |
| |
| 2010-10-04 Ed Falis <falis@adacore.com> |
| |
| * s-taprop-vxworks.adb (Is_Task_Context): Import VxWorks intContext to |
| determine whether Set_True is called from a task or an ISR. |
| (Set_True): test for being in a task context before trying to |
| dereference Defer_Abort or Undefer_Abort. |
| |
| 2010-10-04 Robert Dewar <dewar@adacore.com> |
| |
| * sem_res.adb, sinput-l.adb: Minor reformatting. |
| |
| 2010-10-04 Hristian Kirtchev <kirtchev@adacore.com> |
| |
| * exp_ch5.adb (Expand_N_Assignment_Statement): Do not generate a tag |
| check when the target object is an interface since the expression of |
| the right hand side must only cover the interface. |
| |
| 2010-10-04 Vincent Celier <celier@adacore.com> |
| |
| * frontend.adb: Set Lib.Parsing_Main_Extended_Source to True before |
| loading the main source, so that if it is preprocessed and -gnateG is |
| used, the preprocessed file is written. |
| * lib.ads (Analysing_Subunit_Of_Main): New global variable to indicate |
| if a subunit is from the main unit when it is loaded. |
| * sem_ch10.adb (Analyze_Proper_Body): Set Lib.Analysing_Subunit_Of_Main |
| to True before loading a subunit. |
| * sem_ch12.adb (Copy_Generic_Node): Set Lib.Analysing_Subunit_Of_Main |
| to True when the main is a generic unit before loading one of its |
| subunits. |
| * sinput-l.adb (Load_File): If -gnateG is used, write the preprocessed |
| file only for the main unit (spec, body and subunits). |
| |
| 2010-10-04 Vincent Celier <celier@adacore.com> |
| |
| * sinput-l.adb (Load_File): Do not fail when switch -gnateG is |
| specified and the processed file cannot be written. Just issue a |
| warning and continue. |
| |
| 2010-10-04 Thomas Quinot <quinot@adacore.com> |
| |
| * sem_res.adb: Minor reformatting. |
| |
| 2010-10-04 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch8.adb (Analyze_Subprogram_Renaming): If the renamed operation |
| is an overridden inherited operation, the desired operation is the |
| overriding one, which is the alias of the visible one. |
| |
| 2010-10-04 Ed Schonberg <schonberg@adacore.com> |
| |
| * sem_ch6.adb (Find_Corresponding_Spec): Check that the wrapper body is |
| present before deleting from the tree, when an inherited function with |
| a controlling result that returns a null extension is overridden by a |
| later declaration or body. |
| |
| 2010-10-04 Gary Dismukes <dismukes@adacore.com> |
| |
| * checks.adb: Update comment. |
| |
| 2010-09-30 Joseph Myers <joseph@codesourcery.com> |
| |
| * gcc-interface/misc.c (optimize, optimize_size): Undefine as macros |
| and define as variables. |
| (gnat_post_options): Set optimize and optimize_size variables. |
| |
| 2010-09-29 Joel Sherrill <joel.sherrill@oarcorp.com> |
| |
| * g-socket.adb: Move pragma to disable warnings in case multiple errnos |
| are not defined by target. |
| |
| 2010-09-29 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/utils.c (handle_leaf_attribute): Fix long line. |
| |
| 2010-09-28 Richard Henderson <rth@redhat.com> |
| |
| * gcc-interface/misc.c (gnat_eh_personality): Use |
| targetm.except_unwind_info. |
| |
| 2010-09-28 Jan Hubicka <jh@suse.cz> |
| |
| * gcc-interface/utils.c (handle_leaf_attribute): New function. |
| (gnat_internal_attribute_tables): Add leaf. |
| |
| 2010-09-22 Joseph Myers <joseph@codesourcery.com> |
| |
| * gcc-interface/lang.opt (-all-warnings, -include-barrier, |
| -include-directory, -include-directory=, -no-standard-includes, |
| -no-standard-libraries): New. |
| |
| 2010-09-20 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/decl.c (gnat_to_gnu_entity): Replace calls to |
| build_array_type with calls to build_nonshared_array_type. |
| (substitute_in_type): Likewise. |
| * gcc-interface/misc.c (LANG_HOOKS_HASH_TYPES): Delete. |
| (LANG_HOOKS_TYPE_HASH_EQ): Define. |
| (gnat_post_options): Add 'static' keyword. |
| (gnat_type_hash_eq): New static function. |
| * gcc-interface/utils.c (fntype_same_flags_p): New function. |
| (create_subprog_type): Call it. |
| (create_index_type): Call build_nonshared_range_type and tidy up. |
| (create_range_type): Likewise. |
| * gcc-interface/gigi.h (fntype_same_flags_p): Declare. |
| |
| 2010-09-19 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * gcc-interface/trans.c (gnat_pushdecl): Do not do anything special |
|
