| ------------------------------------------------------------------------------ |
| -- -- |
| -- GNAT LIBRARY COMPONENTS -- |
| -- -- |
| -- S Y S T E M . R E G P A T -- |
| -- -- |
| -- S p e c -- |
| -- -- |
| -- Copyright (C) 1986 by University of Toronto. -- |
| -- Copyright (C) 1996-2022, AdaCore -- |
| -- -- |
| -- GNAT is free software; you can redistribute it and/or modify it under -- |
| -- terms of the GNU General Public License as published by the Free Soft- -- |
| -- ware Foundation; either version 3, or (at your option) any later ver- -- |
| -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- |
| -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- |
| -- or FITNESS FOR A PARTICULAR PURPOSE. -- |
| -- -- |
| -- As a special exception under Section 7 of GPL version 3, you are granted -- |
| -- additional permissions described in the GCC Runtime Library Exception, -- |
| -- version 3.1, as published by the Free Software Foundation. -- |
| -- -- |
| -- You should have received a copy of the GNU General Public License and -- |
| -- a copy of the GCC Runtime Library Exception along with this program; -- |
| -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -- |
| -- <http://www.gnu.org/licenses/>. -- |
| -- -- |
| -- GNAT was originally developed by the GNAT team at New York University. -- |
| -- Extensive contributions were provided by Ada Core Technologies Inc. -- |
| -- -- |
| ------------------------------------------------------------------------------ |
| |
| -- This package implements roughly the same set of regular expressions as |
| -- are available in the Perl or Python programming languages. |
| |
| -- This is an extension of the original V7 style regular expression library |
| -- written in C by Henry Spencer. Apart from the translation to Ada, the |
| -- interface has been considerably changed to use the Ada String type |
| -- instead of C-style nul-terminated strings. |
| |
| -- Note: this package is in the System hierarchy so that it can be directly |
| -- be used by other predefined packages. User access to this package is via |
| -- a renaming of this package in GNAT.Regpat (file g-regpat.ads). |
| |
| package System.Regpat is |
| pragma Preelaborate; |
| |
| -- The grammar is the following: |
| |
| -- regexp ::= expr |
| -- ::= ^ expr -- anchor at the beginning of string |
| -- ::= expr $ -- anchor at the end of string |
| |
| -- expr ::= term |
| -- ::= term | term -- alternation (term or term ...) |
| |
| -- term ::= item |
| -- ::= item item ... -- concatenation (item then item) |
| |
| -- item ::= elmt -- match elmt |
| -- ::= elmt * -- zero or more elmt's |
| -- ::= elmt + -- one or more elmt's |
| -- ::= elmt ? -- matches elmt or nothing |
| -- ::= elmt *? -- zero or more times, minimum number |
| -- ::= elmt +? -- one or more times, minimum number |
| -- ::= elmt ?? -- zero or one time, minimum number |
| -- ::= elmt { num } -- matches elmt exactly num times |
| -- ::= elmt { num , } -- matches elmt at least num times |
| -- ::= elmt { num , num2 } -- matches between num and num2 times |
| -- ::= elmt { num }? -- matches elmt exactly num times |
| -- ::= elmt { num , }? -- matches elmt at least num times |
| -- non-greedy version |
| -- ::= elmt { num , num2 }? -- matches between num and num2 times |
| -- non-greedy version |
| |
| -- elmt ::= nchr -- matches given character |
| -- ::= [range range ...] -- matches any character listed |
| -- ::= [^ range range ...] -- matches any character not listed |
| -- ::= . -- matches any single character |
| -- -- except newlines |
| -- ::= ( expr ) -- parenthesis used for grouping |
| -- ::= (?: expr ) -- non-capturing parenthesis |
| -- ::= \ num -- reference to num-th capturing |
| -- parenthesis |
| |
| -- range ::= char - char -- matches chars in given range |
| -- ::= nchr |
| -- ::= [: posix :] -- any character in the POSIX range |
| -- ::= [:^ posix :] -- not in the POSIX range |
| |
| -- posix ::= alnum -- alphanumeric characters |
| -- ::= alpha -- alphabetic characters |
| -- ::= ascii -- ascii characters (0 .. 127) |
| -- ::= cntrl -- control chars (0..31, 127..159) |
| -- ::= digit -- digits ('0' .. '9') |
| -- ::= graph -- graphic chars (32..126, 160..255) |
| -- ::= lower -- lower case characters |
| -- ::= print -- printable characters (32..127) |
| -- -- and whitespaces (9 .. 13) |
| -- ::= punct -- printable, except alphanumeric |
| -- ::= space -- space characters |
| -- ::= upper -- upper case characters |
| -- ::= word -- alphanumeric characters |
| -- ::= xdigit -- hexadecimal chars (0..9, a..f) |
| |
| -- char ::= any character, including special characters |
| -- ASCII.NUL is not supported. |
| |
| -- nchr ::= any character except \()[].*+?^ or \char to match char |
| -- \n means a newline (ASCII.LF) |
| -- \t means a tab (ASCII.HT) |
| -- \r means a return (ASCII.CR) |
| -- \b matches the empty string at the beginning or end of a |
| -- word. A word is defined as a set of alphanumerical |
| -- characters (see \w below). |
| -- \B matches the empty string only when *not* at the |
| -- beginning or end of a word. |
| -- \d matches any digit character ([0-9]) |
| -- \D matches any non digit character ([^0-9]) |
| -- \s matches any white space character. This is equivalent |
| -- to [ \t\n\r\f\v] (tab, form-feed, vertical-tab,... |
| -- \S matches any non-white space character. |
| -- \w matches any alphanumeric character or underscore. |
| -- This include accented letters, as defined in the |
| -- package Ada.Characters.Handling. |
| -- \W matches any non-alphanumeric character. |
| -- \A match the empty string only at the beginning of the |
| -- string, whatever flags are used for Compile (the |
| -- behavior of ^ can change, see Regexp_Flags below). |
| -- \G match the empty string only at the end of the |
| -- string, whatever flags are used for Compile (the |
| -- behavior of $ can change, see Regexp_Flags below). |
| -- ... ::= is used to indication repetition (one or more terms) |
| |
| -- Embedded newlines are not matched by the ^ operator. |
| -- It is possible to retrieve the substring matched a parenthesis |
| -- expression. Although the depth of parenthesis is not limited in the |
| -- regexp, only the first 9 substrings can be retrieved. |
| |
| -- The highest value possible for the arguments to the curly operator ({}) |
| -- are given by the constant Max_Curly_Repeat below. |
| |
| -- The operators '*', '+', '?' and '{}' always match the longest possible |
| -- substring. They all have a non-greedy version (with an extra ? after the |
| -- operator), which matches the shortest possible substring. |
| |
| -- For instance: |
| -- regexp="<.*>" string="<h1>title</h1>" matches="<h1>title</h1>" |
| -- regexp="<.*?>" string="<h1>title</h1>" matches="<h1>" |
| -- |
| -- '{' and '}' are only considered as special characters if they appear |
| -- in a substring that looks exactly like '{n}', '{n,m}' or '{n,}', where |
| -- n and m are digits. No space is allowed. In other contexts, the curly |
| -- braces will simply be treated as normal characters. |
| |
| -- Compiling Regular Expressions |
| -- ============================= |
| |
| -- To use this package, you first need to compile the regular expression |
| -- (a string) into a byte-code program, in a Pattern_Matcher structure. |
| -- This first step checks that the regexp is valid, and optimizes the |
| -- matching algorithms of the second step. |
| |
| -- Two versions of the Compile subprogram are given: one in which this |
| -- package will compute itself the best possible size to allocate for the |
| -- byte code; the other where you must allocate enough memory yourself. An |
| -- exception is raised if there is not enough memory. |
| |
| -- declare |
| -- Regexp : String := "a|b"; |
| |
| -- Matcher : Pattern_Matcher := Compile (Regexp); |
| -- -- The size for matcher is automatically allocated |
| |
| -- Matcher2 : Pattern_Matcher (1000); |
| -- -- Some space is allocated directly. |
| |
| -- begin |
| -- Compile (Matcher2, Regexp); |
| -- ... |
| -- end; |
| |
| -- Note that the second version is significantly faster, since with the |
| -- first version the regular expression has in fact to be compiled twice |
| -- (first to compute the size, then to generate the byte code). |
| |
| -- Note also that you cannot use the function version of Compile if you |
| -- specify the size of the Pattern_Matcher, since the discriminants will |
| -- most probably be different and you will get a Constraint_Error |
| |
| -- Matching Strings |
| -- ================ |
| |
| -- Once the regular expression has been compiled, you can use it as often |
| -- as needed to match strings. |
| |
| -- Several versions of the Match subprogram are provided, with different |
| -- parameters and return results. |
| |
| -- See the description under each of these subprograms |
| |
| -- Here is a short example showing how to get the substring matched by |
| -- the first parenthesis pair. |
| |
| -- declare |
| -- Matches : Match_Array (0 .. 1); |
| -- Regexp : String := "a(b|c)d"; |
| -- Str : String := "gacdg"; |
| |
| -- begin |
| -- Match (Compile (Regexp), Str, Matches); |
| -- return Str (Matches (1).First .. Matches (1).Last); |
| -- -- returns 'c' |
| -- end; |
| |
| -- Finding all occurrences |
| -- ======================= |
| |
| -- Finding all the occurrences of a regular expression in a string cannot |
| -- be done by simply passing a slice of the string. This wouldn't work for |
| -- anchored regular expressions (the ones starting with "^" or ending with |
| -- "$"). |
| -- Instead, you need to use the last parameter to Match (Data_First), as in |
| -- the following loop: |
| |
| -- declare |
| -- Str : String := |
| -- "-- first line" & ASCII.LF & "-- second line"; |
| -- Matches : Match_Array (0 .. 0); |
| -- Regexp : Pattern_Matcher := Compile ("^--", Multiple_Lines); |
| -- Current : Natural := Str'First; |
| -- begin |
| -- loop |
| -- Match (Regexp, Str, Matches, Current); |
| -- exit when Matches (0) = No_Match; |
| -- |
| -- -- Process the match at position Matches (0).First |
| -- |
| -- Current := Matches (0).Last + 1; |
| -- end loop; |
| -- end; |
| |
| -- String Substitution |
| -- =================== |
| |
| -- No subprogram is currently provided for string substitution. |
| -- However, this is easy to simulate with the parenthesis groups, as |
| -- shown below. |
| |
| -- This example swaps the first two words of the string: |
| |
| -- declare |
| -- Regexp : String := "([a-z]+) +([a-z]+)"; |
| -- Str : String := " first second third "; |
| -- Matches : Match_Array (0 .. 2); |
| |
| -- begin |
| -- Match (Compile (Regexp), Str, Matches); |
| -- return Str (Str'First .. Matches (1).First - 1) |
| -- & Str (Matches (2).First .. Matches (2).Last) |
| -- & " " |
| -- & Str (Matches (1).First .. Matches (1).Last) |
| -- & Str (Matches (2).Last + 1 .. Str'Last); |
| -- -- returns " second first third " |
| -- end; |
| |
| --------------- |
| -- Constants -- |
| --------------- |
| |
| Expression_Error : exception; |
| -- This exception is raised when trying to compile an invalid regular |
| -- expression. All subprograms taking an expression as parameter may raise |
| -- Expression_Error. |
| |
| Max_Paren_Count : constant := 255; |
| -- Maximum number of parenthesis in a regular expression. This is limited |
| -- by the size of a Character, as found in the byte-compiled version of |
| -- regular expressions. |
| |
| Max_Curly_Repeat : constant := 32767; |
| -- Maximum number of repetition for the curly operator. The digits in the |
| -- {n}, {n,} and {n,m } operators cannot be higher than this constant, |
| -- since they have to fit on two characters in the byte-compiled version of |
| -- regular expressions. |
| |
| Max_Program_Size : constant := 2**15 - 1; |
| -- Maximum size that can be allocated for a program |
| |
| type Program_Size is range 0 .. Max_Program_Size; |
| for Program_Size'Size use 16; |
| -- Number of bytes allocated for the byte-compiled version of a regular |
| -- expression. The size required depends on the complexity of the regular |
| -- expression in a complex manner that is undocumented (other than in the |
| -- body of the Compile procedure). Normally the size is automatically set |
| -- and the programmer need not be concerned about it. There are two |
| -- exceptions to this. First in the calls to Match, it is possible to |
| -- specify a non-zero size that is known to be large enough. This can |
| -- slightly increase the efficiency by avoiding a copy. Second, in the case |
| -- of calling compile, it is possible using the procedural form of Compile |
| -- to use a single Pattern_Matcher variable for several different |
| -- expressions by setting its size sufficiently large. |
| |
| Auto_Size : constant := 0; |
| -- Used in calls to Match to indicate that the Size should be set to |
| -- a value appropriate to the expression being used automatically. |
| |
| type Regexp_Flags is mod 256; |
| for Regexp_Flags'Size use 8; |
| -- Flags that can be given at compile time to specify default |
| -- properties for the regular expression. |
| |
| No_Flags : constant Regexp_Flags; |
| Case_Insensitive : constant Regexp_Flags; |
| -- The automaton is optimized so that the matching is done in a case |
| -- insensitive manner (upper case characters and lower case characters |
| -- are all treated the same way). |
| |
| Single_Line : constant Regexp_Flags; |
| -- Treat the Data we are matching as a single line. This means that |
| -- ^ and $ will ignore \n (unless Multiple_Lines is also specified), |
| -- and that '.' will match \n. |
| |
| Multiple_Lines : constant Regexp_Flags; |
| -- Treat the Data as multiple lines. This means that ^ and $ will also |
| -- match on internal newlines (ASCII.LF), in addition to the beginning |
| -- and end of the string. |
| -- |
| -- This can be combined with Single_Line. |
| |
| ----------------- |
| -- Match_Array -- |
| ----------------- |
| |
| subtype Match_Count is Natural range 0 .. Max_Paren_Count; |
| |
| type Match_Location is record |
| First : Natural := 0; |
| Last : Natural := 0; |
| end record; |
| |
| type Match_Array is array (Match_Count range <>) of Match_Location; |
| -- Used for regular expressions that can contain parenthesized |
| -- subexpressions. Certain Match subprograms below produce Matches of type |
| -- Match_Array. Each component of Matches is set to the subrange of the |
| -- matches substring, or to No_Match if no match. Matches (N) is for the |
| -- N'th parenthesized subexpressions; Matches (0) is for the whole |
| -- expression. |
| -- |
| -- Non-capturing parenthesis (introduced with (?:...)) cannot be |
| -- retrieved and do not count in the match array index. |
| -- |
| -- For instance, if your regular expression is: "a((b*)c+)(d+)", then |
| -- 12 3 |
| -- Matches (0) is for "a((b*)c+)(d+)" (the entire expression) |
| -- Matches (1) is for "(b*)c+" |
| -- Matches (2) is for "b*" |
| -- Matches (3) is for "d+" |
| -- |
| -- The number of parenthesis groups that can be retrieved is limited only |
| -- by Max_Paren_Count. |
| -- |
| -- Normally, the bounds of the Matches actual parameter will be |
| -- 0 .. Paren_Count (Regexp), to get all the matches. However, it is fine |
| -- if Matches is shorter than that on either end; missing components will |
| -- be ignored. Thus, in the above example, you could use 2 .. 2 if all you |
| -- care about it the second parenthesis pair "b*". Likewise, if |
| -- Matches'Last > Paren_Count (Regexp), the extra components will be set to |
| -- No_Match. |
| |
| No_Match : constant Match_Location := (First => 0, Last => 0); |
| -- The No_Match constant is (0, 0) to differentiate between matching a null |
| -- string at position 1, which uses (1, 0) and no match at all. |
| |
| --------------------------------- |
| -- Pattern_Matcher Compilation -- |
| --------------------------------- |
| |
| -- The subprograms here are used to precompile regular expressions for use |
| -- in subsequent Match calls. Precompilation improves efficiency if the |
| -- same regular expression is to be used in more than one Match call. |
| |
| type Pattern_Matcher (Size : Program_Size) is private; |
| -- Type used to represent a regular expression compiled into byte code |
| |
| Never_Match : constant Pattern_Matcher; |
| -- A regular expression that never matches anything |
| |
| function Compile |
| (Expression : String; |
| Flags : Regexp_Flags := No_Flags) return Pattern_Matcher; |
| -- Compile a regular expression into internal code |
| -- |
| -- Raises Expression_Error if Expression is not a legal regular expression |
| -- |
| -- The appropriate size is calculated automatically to correspond to the |
| -- provided expression. This is the normal default method of compilation. |
| -- Note that it is generally not possible to assign the result of two |
| -- different calls to this Compile function to the same Pattern_Matcher |
| -- variable, since the sizes will differ. |
| -- |
| -- Flags is the default value to use to set properties for Expression |
| -- (e.g. case sensitivity,...). |
| |
| procedure Compile |
| (Matcher : out Pattern_Matcher; |
| Expression : String; |
| Final_Code_Size : out Program_Size; |
| Flags : Regexp_Flags := No_Flags); |
| -- Compile a regular expression into internal code |
| |
| -- This procedure is significantly faster than the Compile function since |
| -- it avoids the extra step of precomputing the required size. |
| -- |
| -- However, it requires the user to provide a Pattern_Matcher variable |
| -- whose size is preset to a large enough value. One advantage of this |
| -- approach, in addition to the improved efficiency, is that the same |
| -- Pattern_Matcher variable can be used to hold the compiled code for |
| -- several different regular expressions by setting a size that is large |
| -- enough to accommodate all possibilities. |
| -- |
| -- In this version of the procedure call, the actual required code size is |
| -- returned. Also if Matcher.Size is zero on entry, then the resulting code |
| -- is not stored. A call with Matcher.Size set to Auto_Size can thus be |
| -- used to determine the space required for compiling the given regular |
| -- expression. |
| -- |
| -- This function raises Storage_Error if Matcher is too small to hold |
| -- the resulting code (i.e. Matcher.Size has too small a value). |
| -- |
| -- Expression_Error is raised if the string Expression does not contain |
| -- a valid regular expression. |
| -- |
| -- Flags is the default value to use to set properties for Expression (case |
| -- sensitivity,...). |
| |
| procedure Compile |
| (Matcher : out Pattern_Matcher; |
| Expression : String; |
| Flags : Regexp_Flags := No_Flags); |
| -- Same procedure as above, expect it does not return the final |
| -- program size, and Matcher.Size cannot be Auto_Size. |
| |
| function Paren_Count (Regexp : Pattern_Matcher) return Match_Count; |
| pragma Inline (Paren_Count); |
| -- Return the number of parenthesis pairs in Regexp. |
| -- |
| -- This is the maximum index that will be filled if a Match_Array is |
| -- used as an argument to Match. |
| -- |
| -- Thus, if you want to be sure to get all the parenthesis, you should |
| -- do something like: |
| -- |
| -- declare |
| -- Regexp : Pattern_Matcher := Compile ("a(b*)(c+)"); |
| -- Matched : Match_Array (0 .. Paren_Count (Regexp)); |
| -- begin |
| -- Match (Regexp, "a string", Matched); |
| -- end; |
| |
| ------------- |
| -- Quoting -- |
| ------------- |
| |
| function Quote (Str : String) return String; |
| -- Return a version of Str so that every special character is quoted. |
| -- The resulting string can be used in a regular expression to match |
| -- exactly Str, whatever character was present in Str. |
| |
| -------------- |
| -- Matching -- |
| -------------- |
| |
| -- The Match subprograms are given a regular expression in string |
| -- form, and perform the corresponding match. The following parameters |
| -- are present in all forms of the Match call. |
| |
| -- Expression contains the regular expression to be matched as a string |
| |
| -- Data contains the string to be matched |
| |
| -- Data_First is the lower bound for the match, i.e. Data (Data_First) |
| -- will be the first character to be examined. If Data_First is set to |
| -- the special value of -1 (the default), then the first character to |
| -- be examined is Data (Data'First). However, the regular expression |
| -- character ^ (start of string) always refers to the first character |
| -- of the full string (Data (Data'First)), which is why there is a |
| -- separate mechanism for specifying Data_First. |
| |
| -- Data_Last is the upper bound for the match, i.e. Data (Data_Last) |
| -- will be the last character to be examined. If Data_Last is set to |
| -- the special value of Positive'Last (the default), then the last |
| -- character to be examined is Data (Data'Last). However, the regular |
| -- expression character $ (end of string) always refers to the last |
| -- character of the full string (Data (Data'Last)). |
| |
| -- Note: the use of Data_First and Data_Last is not equivalent to |
| -- simply passing a slice as Expression because of the handling of |
| -- regular expression characters ^ and $. |
| |
| -- Size is the size allocated for the compiled byte code. Normally |
| -- this is defaulted to Auto_Size which means that the appropriate |
| -- size is allocated automatically. It is possible to specify an |
| -- explicit size, which must be sufficiently large. This slightly |
| -- increases the efficiency by avoiding the extra step of computing |
| -- the appropriate size. |
| |
| -- The following exceptions can be raised in calls to Match |
| -- |
| -- Storage_Error is raised if a non-zero value is given for Size |
| -- and it is too small to hold the compiled byte code. |
| -- |
| -- Expression_Error is raised if the given expression is not a legal |
| -- regular expression. |
| |
| procedure Match |
| (Expression : String; |
| Data : String; |
| Matches : out Match_Array; |
| Size : Program_Size := Auto_Size; |
| Data_First : Integer := -1; |
| Data_Last : Positive := Positive'Last); |
| -- This version returns the result of the match stored in Match_Array; |
| -- see comments under Match_Array above for details. |
| |
| function Match |
| (Expression : String; |
| Data : String; |
| Size : Program_Size := Auto_Size; |
| Data_First : Integer := -1; |
| Data_Last : Positive := Positive'Last) return Natural; |
| -- This version returns the position where Data matches, or if there is |
| -- no match, then the value Data'First - 1. |
| |
| function Match |
| (Expression : String; |
| Data : String; |
| Size : Program_Size := Auto_Size; |
| Data_First : Integer := -1; |
| Data_Last : Positive := Positive'Last) return Boolean; |
| -- This version returns True if the match succeeds, False otherwise |
| |
| ------------------------------------------------ |
| -- Matching a Pre-Compiled Regular Expression -- |
| ------------------------------------------------ |
| |
| -- The following functions are significantly faster if you need to reuse |
| -- the same regular expression multiple times, since you only have to |
| -- compile it once. For these functions you must first compile the |
| -- expression with a call to Compile as previously described. |
| |
| -- The parameters Data, Data_First and Data_Last are as described |
| -- in the previous section. |
| |
| function Match |
| (Self : Pattern_Matcher; |
| Data : String; |
| Data_First : Integer := -1; |
| Data_Last : Positive := Positive'Last) return Natural; |
| -- Match Data using the given pattern matcher. Returns the position |
| -- where Data matches, or (Data'First - 1) if there is no match. |
| |
| function Match |
| (Self : Pattern_Matcher; |
| Data : String; |
| Data_First : Integer := -1; |
| Data_Last : Positive := Positive'Last) return Boolean; |
| -- Return True if Data matches using the given pattern matcher |
| |
| pragma Inline (Match); |
| -- All except the last one below |
| |
| procedure Match |
| (Self : Pattern_Matcher; |
| Data : String; |
| Matches : out Match_Array; |
| Data_First : Integer := -1; |
| Data_Last : Positive := Positive'Last); |
| -- Match Data using the given pattern matcher and store result in Matches; |
| -- see comments under Match_Array above for details. |
| |
| ----------- |
| -- Debug -- |
| ----------- |
| |
| procedure Dump (Self : Pattern_Matcher); |
| -- Dump the compiled version of the regular expression matched by Self |
| |
| -------------------------- |
| -- Private Declarations -- |
| -------------------------- |
| |
| private |
| |
| subtype Pointer is Program_Size; |
| -- The Pointer type is used to point into Program_Data |
| |
| -- Note that the pointer type is not necessarily 2 bytes |
| -- although it is stored in the program using 2 bytes |
| |
| type Program_Data is array (Pointer range <>) of Character; |
| |
| Program_First : constant := 1; |
| |
| -- The "internal use only" fields in regexp are present to pass info from |
| -- compile to execute that permits the execute phase to run lots faster on |
| -- simple cases. They are: |
| |
| -- First character that must begin a match or ASCII.NUL |
| -- Anchored true iff match must start at beginning of line |
| -- Must_Have pointer to string that match must include or null |
| -- Must_Have_Length length of Must_Have string |
| |
| -- First and Anchored permit very fast decisions on suitable starting |
| -- points for a match, cutting down the work a lot. Must_Have permits fast |
| -- rejection of lines that cannot possibly match. |
| |
| -- The Must_Have tests are costly enough that Optimize supplies a Must_Have |
| -- only if the r.e. contains something potentially expensive (at present, |
| -- the only such thing detected is * or at the start of the r.e., which can |
| -- involve a lot of backup). The length is supplied because the test in |
| -- Execute needs it and Optimize is computing it anyway. |
| |
| -- The initialization is meant to fail-safe in case the user of this |
| -- package tries to use an uninitialized matcher. This takes advantage |
| -- of the knowledge that ASCII.NUL translates to the end-of-program (EOP) |
| -- instruction code of the state machine. |
| |
| No_Flags : constant Regexp_Flags := 0; |
| Case_Insensitive : constant Regexp_Flags := 1; |
| Single_Line : constant Regexp_Flags := 2; |
| Multiple_Lines : constant Regexp_Flags := 4; |
| |
| type Pattern_Matcher (Size : Pointer) is record |
| First : Character := ASCII.NUL; -- internal use only |
| Anchored : Boolean := False; -- internal use only |
| Must_Have : Pointer := 0; -- internal use only |
| Must_Have_Length : Natural := 0; -- internal use only |
| Paren_Count : Natural := 0; -- # paren groups |
| Flags : Regexp_Flags := No_Flags; |
| Program : Program_Data (Program_First .. Size) := |
| [others => ASCII.NUL]; |
| end record; |
| |
| Never_Match : constant Pattern_Matcher := |
| (0, ASCII.NUL, False, 0, 0, 0, No_Flags, [others => ASCII.NUL]); |
| |
| end System.Regpat; |