blob: a24b9d72db66a051e1e63021b1b8ce4d1fb02147 [file] [log] [blame]
------------------------------------------------------------------------------
-- --
-- GNAT COMPILER COMPONENTS --
-- --
-- S E M _ D I M --
-- --
-- B o d y --
-- --
-- Copyright (C) 2011-2022, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
-- Public License distributed with GNAT; see file COPYING3. If not, go to --
-- http://www.gnu.org/licenses for a complete copy of the license. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc. --
-- --
------------------------------------------------------------------------------
with Aspects; use Aspects;
with Atree; use Atree;
with Einfo; use Einfo;
with Einfo.Entities; use Einfo.Entities;
with Einfo.Utils; use Einfo.Utils;
with Errout; use Errout;
with Exp_Util; use Exp_Util;
with Lib; use Lib;
with Namet; use Namet;
with Nlists; use Nlists;
with Nmake; use Nmake;
with Opt; use Opt;
with Rtsfind; use Rtsfind;
with Sem; use Sem;
with Sem_Aux; use Sem_Aux;
with Sem_Eval; use Sem_Eval;
with Sem_Res; use Sem_Res;
with Sem_Util; use Sem_Util;
with Sinfo; use Sinfo;
with Sinfo.Nodes; use Sinfo.Nodes;
with Sinfo.Utils; use Sinfo.Utils;
with Snames; use Snames;
with Stand; use Stand;
with Stringt; use Stringt;
with Table;
with Tbuild; use Tbuild;
with Uintp; use Uintp;
with Urealp; use Urealp;
with GNAT.HTable;
package body Sem_Dim is
-------------------------
-- Rational Arithmetic --
-------------------------
type Whole is new Int;
subtype Positive_Whole is Whole range 1 .. Whole'Last;
type Rational is record
Numerator : Whole;
Denominator : Positive_Whole;
end record;
Zero : constant Rational := Rational'(Numerator => 0,
Denominator => 1);
No_Rational : constant Rational := Rational'(Numerator => 0,
Denominator => 2);
-- Used to indicate an expression that cannot be interpreted as a rational
-- Returned value of the Create_Rational_From routine when parameter Expr
-- is not a static representation of a rational.
-- Rational constructors
function "+" (Right : Whole) return Rational;
function GCD (Left, Right : Whole) return Int;
function Reduce (X : Rational) return Rational;
-- Unary operator for Rational
function "-" (Right : Rational) return Rational;
function "abs" (Right : Rational) return Rational;
-- Rational operations for Rationals
function "+" (Left, Right : Rational) return Rational;
function "-" (Left, Right : Rational) return Rational;
function "*" (Left, Right : Rational) return Rational;
function "/" (Left, Right : Rational) return Rational;
------------------
-- System Types --
------------------
Max_Number_Of_Dimensions : constant := 7;
-- Maximum number of dimensions in a dimension system
High_Position_Bound : constant := Max_Number_Of_Dimensions;
Invalid_Position : constant := 0;
Low_Position_Bound : constant := 1;
subtype Dimension_Position is
Nat range Invalid_Position .. High_Position_Bound;
type Name_Array is
array (Dimension_Position range
Low_Position_Bound .. High_Position_Bound) of Name_Id;
-- Store the names of all units within a system
No_Names : constant Name_Array := (others => No_Name);
type Symbol_Array is
array (Dimension_Position range
Low_Position_Bound .. High_Position_Bound) of String_Id;
-- Store the symbols of all units within a system
No_Symbols : constant Symbol_Array := (others => No_String);
-- The following record should be documented field by field
type System_Type is record
Type_Decl : Node_Id;
Unit_Names : Name_Array;
Unit_Symbols : Symbol_Array;
Dim_Symbols : Symbol_Array;
Count : Dimension_Position;
end record;
Null_System : constant System_Type :=
(Empty, No_Names, No_Symbols, No_Symbols, Invalid_Position);
subtype System_Id is Nat;
-- The following table maps types to systems
package System_Table is new Table.Table (
Table_Component_Type => System_Type,
Table_Index_Type => System_Id,
Table_Low_Bound => 1,
Table_Initial => 5,
Table_Increment => 5,
Table_Name => "System_Table");
--------------------
-- Dimension Type --
--------------------
type Dimension_Type is
array (Dimension_Position range
Low_Position_Bound .. High_Position_Bound) of Rational;
Null_Dimension : constant Dimension_Type := (others => Zero);
type Dimension_Table_Range is range 0 .. 510;
function Dimension_Table_Hash (Key : Node_Id) return Dimension_Table_Range;
-- The following table associates nodes with dimensions
package Dimension_Table is new
GNAT.HTable.Simple_HTable
(Header_Num => Dimension_Table_Range,
Element => Dimension_Type,
No_Element => Null_Dimension,
Key => Node_Id,
Hash => Dimension_Table_Hash,
Equal => "=");
------------------
-- Symbol Types --
------------------
type Symbol_Table_Range is range 0 .. 510;
function Symbol_Table_Hash (Key : Entity_Id) return Symbol_Table_Range;
-- Each subtype with a dimension has a symbolic representation of the
-- related unit. This table establishes a relation between the subtype
-- and the symbol.
package Symbol_Table is new
GNAT.HTable.Simple_HTable
(Header_Num => Symbol_Table_Range,
Element => String_Id,
No_Element => No_String,
Key => Entity_Id,
Hash => Symbol_Table_Hash,
Equal => "=");
-- The following array enumerates all contexts which may contain or
-- produce a dimension.
OK_For_Dimension : constant array (Node_Kind) of Boolean :=
(N_Attribute_Reference => True,
N_Case_Expression => True,
N_Expanded_Name => True,
N_Explicit_Dereference => True,
N_Defining_Identifier => True,
N_Function_Call => True,
N_Identifier => True,
N_If_Expression => True,
N_Indexed_Component => True,
N_Integer_Literal => True,
N_Op_Abs => True,
N_Op_Add => True,
N_Op_Divide => True,
N_Op_Expon => True,
N_Op_Minus => True,
N_Op_Mod => True,
N_Op_Multiply => True,
N_Op_Plus => True,
N_Op_Rem => True,
N_Op_Subtract => True,
N_Qualified_Expression => True,
N_Real_Literal => True,
N_Selected_Component => True,
N_Slice => True,
N_Type_Conversion => True,
N_Unchecked_Type_Conversion => True,
others => False);
-----------------------
-- Local Subprograms --
-----------------------
procedure Analyze_Dimension_Assignment_Statement (N : Node_Id);
-- Subroutine of Analyze_Dimension for assignment statement. Check that the
-- dimensions of the left-hand side and the right-hand side of N match.
procedure Analyze_Dimension_Binary_Op (N : Node_Id);
-- Subroutine of Analyze_Dimension for binary operators. Check the
-- dimensions of the right and the left operand permit the operation.
-- Then, evaluate the resulting dimensions for each binary operator.
procedure Analyze_Dimension_Component_Declaration (N : Node_Id);
-- Subroutine of Analyze_Dimension for component declaration. Check that
-- the dimensions of the type of N and of the expression match.
procedure Analyze_Dimension_Extended_Return_Statement (N : Node_Id);
-- Subroutine of Analyze_Dimension for extended return statement. Check
-- that the dimensions of the returned type and of the returned object
-- match.
procedure Analyze_Dimension_Has_Etype (N : Node_Id);
-- Subroutine of Analyze_Dimension for a subset of N_Has_Etype denoted by
-- the list below:
-- N_Attribute_Reference
-- N_Identifier
-- N_Indexed_Component
-- N_Qualified_Expression
-- N_Selected_Component
-- N_Slice
-- N_Type_Conversion
-- N_Unchecked_Type_Conversion
procedure Analyze_Dimension_Case_Expression (N : Node_Id);
-- Verify that all alternatives have the same dimension
procedure Analyze_Dimension_If_Expression (N : Node_Id);
-- Verify that all alternatives have the same dimension
procedure Analyze_Dimension_Number_Declaration (N : Node_Id);
-- Procedure to analyze dimension of expression in a number declaration.
-- This allows a named number to have nontrivial dimensions, while by
-- default a named number is dimensionless.
procedure Analyze_Dimension_Object_Declaration (N : Node_Id);
-- Subroutine of Analyze_Dimension for object declaration. Check that
-- the dimensions of the object type and the dimensions of the expression
-- (if expression is present) match. Note that when the expression is
-- a literal, no error is returned. This special case allows object
-- declaration such as: m : constant Length := 1.0;
procedure Analyze_Dimension_Object_Renaming_Declaration (N : Node_Id);
-- Subroutine of Analyze_Dimension for object renaming declaration. Check
-- the dimensions of the type and of the renamed object name of N match.
procedure Analyze_Dimension_Simple_Return_Statement (N : Node_Id);
-- Subroutine of Analyze_Dimension for simple return statement
-- Check that the dimensions of the returned type and of the returned
-- expression match.
procedure Analyze_Dimension_Subtype_Declaration (N : Node_Id);
-- Subroutine of Analyze_Dimension for subtype declaration. Propagate the
-- dimensions from the parent type to the identifier of N. Note that if
-- both the identifier and the parent type of N are not dimensionless,
-- return an error.
procedure Analyze_Dimension_Type_Conversion (N : Node_Id);
-- Type conversions handle conversions between literals and dimensioned
-- types, from dimensioned types to their base type, and between different
-- dimensioned systems. Dimensions of the conversion are obtained either
-- from those of the expression, or from the target type, and dimensional
-- consistency must be checked when converting between values belonging
-- to different dimensioned systems.
procedure Analyze_Dimension_Unary_Op (N : Node_Id);
-- Subroutine of Analyze_Dimension for unary operators. For Plus, Minus and
-- Abs operators, propagate the dimensions from the operand to N.
function Create_Rational_From
(Expr : Node_Id;
Complain : Boolean) return Rational;
-- Given an arbitrary expression Expr, return a valid rational if Expr can
-- be interpreted as a rational. Otherwise return No_Rational and also an
-- error message if Complain is set to True.
function Dimensions_Of (N : Node_Id) return Dimension_Type;
-- Return the dimension vector of node N
function Dimensions_Msg_Of
(N : Node_Id;
Description_Needed : Boolean := False) return String;
-- Given a node N, return the dimension symbols of N, preceded by "has
-- dimension" if Description_Needed. If N is dimensionless, return "'[']",
-- or "is dimensionless" if Description_Needed.
function Dimension_System_Root (T : Entity_Id) return Entity_Id;
-- Given a type that has dimension information, return the type that is the
-- root of its dimension system, e.g. Mks_Type. If T is not a dimensioned
-- type, i.e. a standard numeric type, return Empty.
procedure Dim_Warning_For_Numeric_Literal (N : Node_Id; Typ : Entity_Id);
-- Issue a warning on the given numeric literal N to indicate that the
-- compiler made the assumption that the literal is not dimensionless
-- but has the dimension of Typ.
procedure Eval_Op_Expon_With_Rational_Exponent
(N : Node_Id;
Exponent_Value : Rational);
-- Evaluate the exponent it is a rational and the operand has a dimension
function Exists (Dim : Dimension_Type) return Boolean;
-- Returns True iff Dim does not denote the null dimension
function Exists (Str : String_Id) return Boolean;
-- Returns True iff Str does not denote No_String
function Exists (Sys : System_Type) return Boolean;
-- Returns True iff Sys does not denote the null system
function From_Dim_To_Str_Of_Dim_Symbols
(Dims : Dimension_Type;
System : System_Type;
In_Error_Msg : Boolean := False) return String_Id;
-- Given a dimension vector and a dimension system, return the proper
-- string of dimension symbols. If In_Error_Msg is True (i.e. the String_Id
-- will be used to issue an error message) then this routine has a special
-- handling for the insertion characters * or [ which must be preceded by
-- a quote ' to be placed literally into the message.
function From_Dim_To_Str_Of_Unit_Symbols
(Dims : Dimension_Type;
System : System_Type) return String_Id;
-- Given a dimension vector and a dimension system, return the proper
-- string of unit symbols.
function Is_Dim_IO_Package_Entity (E : Entity_Id) return Boolean;
-- Return True if E is the package entity of System.Dim.Float_IO or
-- System.Dim.Integer_IO.
function Is_Invalid (Position : Dimension_Position) return Boolean;
-- Return True if Pos denotes the invalid position
procedure Move_Dimensions (From : Node_Id; To : Node_Id);
-- Copy dimension vector of From to To and delete dimension vector of From
procedure Remove_Dimensions (N : Node_Id);
-- Remove the dimension vector of node N
procedure Set_Dimensions (N : Node_Id; Val : Dimension_Type);
-- Associate a dimension vector with a node
procedure Set_Symbol (E : Entity_Id; Val : String_Id);
-- Associate a symbol representation of a dimension vector with a subtype
function Symbol_Of (E : Entity_Id) return String_Id;
-- E denotes a subtype with a dimension. Return the symbol representation
-- of the dimension vector.
function System_Of (E : Entity_Id) return System_Type;
-- E denotes a type, return associated system of the type if it has one
---------
-- "+" --
---------
function "+" (Right : Whole) return Rational is
begin
return Rational'(Numerator => Right, Denominator => 1);
end "+";
function "+" (Left, Right : Rational) return Rational is
R : constant Rational :=
Rational'(Numerator => Left.Numerator * Right.Denominator +
Left.Denominator * Right.Numerator,
Denominator => Left.Denominator * Right.Denominator);
begin
return Reduce (R);
end "+";
---------
-- "-" --
---------
function "-" (Right : Rational) return Rational is
begin
return Rational'(Numerator => -Right.Numerator,
Denominator => Right.Denominator);
end "-";
function "-" (Left, Right : Rational) return Rational is
R : constant Rational :=
Rational'(Numerator => Left.Numerator * Right.Denominator -
Left.Denominator * Right.Numerator,
Denominator => Left.Denominator * Right.Denominator);
begin
return Reduce (R);
end "-";
---------
-- "*" --
---------
function "*" (Left, Right : Rational) return Rational is
R : constant Rational :=
Rational'(Numerator => Left.Numerator * Right.Numerator,
Denominator => Left.Denominator * Right.Denominator);
begin
return Reduce (R);
end "*";
---------
-- "/" --
---------
function "/" (Left, Right : Rational) return Rational is
R : constant Rational := abs Right;
L : Rational := Left;
begin
if Right.Numerator < 0 then
L.Numerator := Whole (-Integer (L.Numerator));
end if;
return Reduce (Rational'(Numerator => L.Numerator * R.Denominator,
Denominator => L.Denominator * R.Numerator));
end "/";
-----------
-- "abs" --
-----------
function "abs" (Right : Rational) return Rational is
begin
return Rational'(Numerator => abs Right.Numerator,
Denominator => Right.Denominator);
end "abs";
------------------------------
-- Analyze_Aspect_Dimension --
------------------------------
-- with Dimension =>
-- ([Symbol =>] SYMBOL, DIMENSION_VALUE {, DIMENSION_Value})
--
-- SYMBOL ::= STRING_LITERAL | CHARACTER_LITERAL
-- DIMENSION_VALUE ::=
-- RATIONAL
-- | others => RATIONAL
-- | DISCRETE_CHOICE_LIST => RATIONAL
-- RATIONAL ::= [-] NUMERIC_LITERAL [/ NUMERIC_LITERAL]
-- Note that when the dimensioned type is an integer type, then any
-- dimension value must be an integer literal.
procedure Analyze_Aspect_Dimension
(N : Node_Id;
Id : Entity_Id;
Aggr : Node_Id)
is
Def_Id : constant Entity_Id := Defining_Identifier (N);
Processed : array (Dimension_Type'Range) of Boolean := (others => False);
-- This array is used when processing ranges or Others_Choice as part of
-- the dimension aggregate.
Dimensions : Dimension_Type := Null_Dimension;
procedure Extract_Power
(Expr : Node_Id;
Position : Dimension_Position);
-- Given an expression with denotes a rational number, read the number
-- and associate it with Position in Dimensions.
function Position_In_System
(Id : Node_Id;
System : System_Type) return Dimension_Position;
-- Given an identifier which denotes a dimension, return the position of
-- that dimension within System.
-------------------
-- Extract_Power --
-------------------
procedure Extract_Power
(Expr : Node_Id;
Position : Dimension_Position)
is
begin
Dimensions (Position) := Create_Rational_From (Expr, True);
Processed (Position) := True;
-- If the dimensioned root type is an integer type, it is not
-- particularly useful, and fractional dimensions do not make
-- much sense for such types, so previously we used to reject
-- dimensions of integer types that were not integer literals.
-- However, the manipulation of dimensions does not depend on
-- the kind of root type, so we can accept this usage for rare
-- cases where dimensions are specified for integer values.
end Extract_Power;
------------------------
-- Position_In_System --
------------------------
function Position_In_System
(Id : Node_Id;
System : System_Type) return Dimension_Position
is
Dimension_Name : constant Name_Id := Chars (Id);
begin
for Position in System.Unit_Names'Range loop
if Dimension_Name = System.Unit_Names (Position) then
return Position;
end if;
end loop;
return Invalid_Position;
end Position_In_System;
-- Local variables
Assoc : Node_Id;
Choice : Node_Id;
Expr : Node_Id;
Num_Choices : Nat := 0;
Num_Dimensions : Nat := 0;
Others_Seen : Boolean := False;
Position : Nat := 0;
Sub_Ind : Node_Id;
Symbol : String_Id := No_String;
Symbol_Expr : Node_Id;
System : System_Type;
Typ : Entity_Id;
Errors_Count : Nat;
-- Errors_Count is a count of errors detected by the compiler so far
-- just before the extraction of symbol, names and values in the
-- aggregate (Step 2).
--
-- At the end of the analysis, there is a check to verify that this
-- count equals to Serious_Errors_Detected i.e. no erros have been
-- encountered during the process. Otherwise the Dimension_Table is
-- not filled.
-- Start of processing for Analyze_Aspect_Dimension
begin
-- STEP 1: Legality of aspect
if Nkind (N) /= N_Subtype_Declaration then
Error_Msg_NE ("aspect& must apply to subtype declaration", N, Id);
return;
end if;
Sub_Ind := Subtype_Indication (N);
Typ := Etype (Sub_Ind);
System := System_Of (Typ);
if Nkind (Sub_Ind) = N_Subtype_Indication then
Error_Msg_NE
("constraint not allowed with aspect&", Constraint (Sub_Ind), Id);
return;
end if;
-- The dimension declarations are useless if the parent type does not
-- declare a valid system.
if not Exists (System) then
Error_Msg_NE
("parent type of& lacks dimension system", Sub_Ind, Def_Id);
return;
end if;
if Nkind (Aggr) /= N_Aggregate then
Error_Msg_N ("aggregate expected", Aggr);
return;
end if;
-- STEP 2: Symbol, Names and values extraction
-- Get the number of errors detected by the compiler so far
Errors_Count := Serious_Errors_Detected;
-- STEP 2a: Symbol extraction
-- The first entry in the aggregate may be the symbolic representation
-- of the quantity.
-- Positional symbol argument
Symbol_Expr := First (Expressions (Aggr));
-- Named symbol argument
if No (Symbol_Expr)
or else Nkind (Symbol_Expr) not in
N_Character_Literal | N_String_Literal
then
Symbol_Expr := Empty;
-- Component associations present
if Present (Component_Associations (Aggr)) then
Assoc := First (Component_Associations (Aggr));
Choice := First (Choices (Assoc));
if No (Next (Choice)) and then Nkind (Choice) = N_Identifier then
-- Symbol component association is present
if Chars (Choice) = Name_Symbol then
Num_Choices := Num_Choices + 1;
Symbol_Expr := Expression (Assoc);
-- Verify symbol expression is a string or a character
if Nkind (Symbol_Expr) not in
N_Character_Literal | N_String_Literal
then
Symbol_Expr := Empty;
Error_Msg_N
("symbol expression must be character or string",
Symbol_Expr);
end if;
-- Special error if no Symbol choice but expression is string
-- or character.
elsif Nkind (Expression (Assoc)) in
N_Character_Literal | N_String_Literal
then
Num_Choices := Num_Choices + 1;
Error_Msg_N
("optional component Symbol expected, found&", Choice);
end if;
end if;
end if;
end if;
-- STEP 2b: Names and values extraction
-- Positional elements
Expr := First (Expressions (Aggr));
-- Skip the symbol expression when present
if Present (Symbol_Expr) and then Num_Choices = 0 then
Next (Expr);
end if;
Position := Low_Position_Bound;
while Present (Expr) loop
if Position > High_Position_Bound then
Error_Msg_N
("type& has more dimensions than system allows", Def_Id);
exit;
end if;
Extract_Power (Expr, Position);
Position := Position + 1;
Num_Dimensions := Num_Dimensions + 1;
Next (Expr);
end loop;
-- Named elements
Assoc := First (Component_Associations (Aggr));
-- Skip the symbol association when present
if Num_Choices = 1 then
Next (Assoc);
end if;
while Present (Assoc) loop
Expr := Expression (Assoc);
Choice := First (Choices (Assoc));
while Present (Choice) loop
-- Identifier case: NAME => EXPRESSION
if Nkind (Choice) = N_Identifier then
Position := Position_In_System (Choice, System);
if Is_Invalid (Position) then
Error_Msg_N ("dimension name& not part of system", Choice);
else
Extract_Power (Expr, Position);
end if;
-- Range case: NAME .. NAME => EXPRESSION
elsif Nkind (Choice) = N_Range then
declare
Low : constant Node_Id := Low_Bound (Choice);
High : constant Node_Id := High_Bound (Choice);
Low_Pos : Dimension_Position;
High_Pos : Dimension_Position;
begin
if Nkind (Low) /= N_Identifier then
Error_Msg_N ("bound must denote a dimension name", Low);
elsif Nkind (High) /= N_Identifier then
Error_Msg_N ("bound must denote a dimension name", High);
else
Low_Pos := Position_In_System (Low, System);
High_Pos := Position_In_System (High, System);
if Is_Invalid (Low_Pos) then
Error_Msg_N ("dimension name& not part of system",
Low);
elsif Is_Invalid (High_Pos) then
Error_Msg_N ("dimension name& not part of system",
High);
elsif Low_Pos > High_Pos then
Error_Msg_N ("expected low to high range", Choice);
else
for Position in Low_Pos .. High_Pos loop
Extract_Power (Expr, Position);
end loop;
end if;
end if;
end;
-- Others case: OTHERS => EXPRESSION
elsif Nkind (Choice) = N_Others_Choice then
if Present (Next (Choice)) or else Present (Prev (Choice)) then
Error_Msg_N
("OTHERS must appear alone in a choice list", Choice);
elsif Present (Next (Assoc)) then
Error_Msg_N
("OTHERS must appear last in an aggregate", Choice);
elsif Others_Seen then
Error_Msg_N ("multiple OTHERS not allowed", Choice);
else
-- Fill the non-processed dimensions with the default value
-- supplied by others.
for Position in Processed'Range loop
if not Processed (Position) then
Extract_Power (Expr, Position);
end if;
end loop;
end if;
Others_Seen := True;
-- All other cases are illegal declarations of dimension names
else
Error_Msg_NE ("wrong syntax for aspect&", Choice, Id);
end if;
Num_Choices := Num_Choices + 1;
Next (Choice);
end loop;
Num_Dimensions := Num_Dimensions + 1;
Next (Assoc);
end loop;
-- STEP 3: Consistency of system and dimensions
if Present (First (Expressions (Aggr)))
and then (First (Expressions (Aggr)) /= Symbol_Expr
or else Present (Next (Symbol_Expr)))
and then (Num_Choices > 1
or else (Num_Choices = 1 and then not Others_Seen))
then
Error_Msg_N
("named associations cannot follow positional associations", Aggr);
end if;
if Num_Dimensions > System.Count then
Error_Msg_N ("type& has more dimensions than system allows", Def_Id);
elsif Num_Dimensions < System.Count and then not Others_Seen then
Error_Msg_N ("type& has less dimensions than system allows", Def_Id);
end if;
-- STEP 4: Dimension symbol extraction
if Present (Symbol_Expr) then
if Nkind (Symbol_Expr) = N_Character_Literal then
Start_String;
Store_String_Char (UI_To_CC (Char_Literal_Value (Symbol_Expr)));
Symbol := End_String;
else
Symbol := Strval (Symbol_Expr);
end if;
if String_Length (Symbol) = 0 then
Error_Msg_N ("empty string not allowed here", Symbol_Expr);
end if;
end if;
-- STEP 5: Storage of extracted values
-- Check that no errors have been detected during the analysis
if Errors_Count = Serious_Errors_Detected then
-- Check for useless declaration
if Symbol = No_String and then not Exists (Dimensions) then
Error_Msg_N ("useless dimension declaration", Aggr);
end if;
if Symbol /= No_String then
Set_Symbol (Def_Id, Symbol);
end if;
if Exists (Dimensions) then
Set_Dimensions (Def_Id, Dimensions);
end if;
end if;
end Analyze_Aspect_Dimension;
-------------------------------------
-- Analyze_Aspect_Dimension_System --
-------------------------------------
-- with Dimension_System => (DIMENSION {, DIMENSION});
-- DIMENSION ::= (
-- [Unit_Name =>] IDENTIFIER,
-- [Unit_Symbol =>] SYMBOL,
-- [Dim_Symbol =>] SYMBOL)
procedure Analyze_Aspect_Dimension_System
(N : Node_Id;
Id : Entity_Id;
Aggr : Node_Id)
is
function Is_Derived_Numeric_Type (N : Node_Id) return Boolean;
-- Determine whether type declaration N denotes a numeric derived type
-------------------------------
-- Is_Derived_Numeric_Type --
-------------------------------
function Is_Derived_Numeric_Type (N : Node_Id) return Boolean is
begin
return
Nkind (N) = N_Full_Type_Declaration
and then Nkind (Type_Definition (N)) = N_Derived_Type_Definition
and then Is_Numeric_Type
(Entity (Subtype_Indication (Type_Definition (N))));
end Is_Derived_Numeric_Type;
-- Local variables
Assoc : Node_Id;
Choice : Node_Id;
Dim_Aggr : Node_Id;
Dim_Symbol : Node_Id;
Dim_Symbols : Symbol_Array := No_Symbols;
Dim_System : System_Type := Null_System;
Position : Dimension_Position := Invalid_Position;
Unit_Name : Node_Id;
Unit_Names : Name_Array := No_Names;
Unit_Symbol : Node_Id;
Unit_Symbols : Symbol_Array := No_Symbols;
Errors_Count : Nat;
-- Errors_Count is a count of errors detected by the compiler so far
-- just before the extraction of names and symbols in the aggregate
-- (Step 3).
--
-- At the end of the analysis, there is a check to verify that this
-- count equals Serious_Errors_Detected i.e. no errors have been
-- encountered during the process. Otherwise the System_Table is
-- not filled.
-- Start of processing for Analyze_Aspect_Dimension_System
begin
-- STEP 1: Legality of aspect
if not Is_Derived_Numeric_Type (N) then
Error_Msg_NE
("aspect& must apply to numeric derived type declaration", N, Id);
return;
end if;
if Nkind (Aggr) /= N_Aggregate then
Error_Msg_N ("aggregate expected", Aggr);
return;
end if;
-- STEP 2: Structural verification of the dimension aggregate
if Present (Component_Associations (Aggr)) then
Error_Msg_N ("expected positional aggregate", Aggr);
return;
end if;
-- STEP 3: Name and Symbol extraction
Dim_Aggr := First (Expressions (Aggr));
Errors_Count := Serious_Errors_Detected;
while Present (Dim_Aggr) loop
if Position = High_Position_Bound then
Error_Msg_N ("too many dimensions in system", Aggr);
exit;
end if;
Position := Position + 1;
if Nkind (Dim_Aggr) /= N_Aggregate then
Error_Msg_N ("aggregate expected", Dim_Aggr);
else
if Present (Component_Associations (Dim_Aggr))
and then Present (Expressions (Dim_Aggr))
then
Error_Msg_N
("mixed positional/named aggregate not allowed here",
Dim_Aggr);
-- Verify each dimension aggregate has three arguments
elsif List_Length (Component_Associations (Dim_Aggr)) /= 3
and then List_Length (Expressions (Dim_Aggr)) /= 3
then
Error_Msg_N
("three components expected in aggregate", Dim_Aggr);
else
-- Named dimension aggregate
if Present (Component_Associations (Dim_Aggr)) then
-- Check first argument denotes the unit name
Assoc := First (Component_Associations (Dim_Aggr));
Choice := First (Choices (Assoc));
Unit_Name := Expression (Assoc);
if Present (Next (Choice))
or else Nkind (Choice) /= N_Identifier
then
Error_Msg_NE ("wrong syntax for aspect&", Choice, Id);
elsif Chars (Choice) /= Name_Unit_Name then
Error_Msg_N ("expected Unit_Name, found&", Choice);
end if;
-- Check the second argument denotes the unit symbol
Next (Assoc);
Choice := First (Choices (Assoc));
Unit_Symbol := Expression (Assoc);
if Present (Next (Choice))
or else Nkind (Choice) /= N_Identifier
then
Error_Msg_NE ("wrong syntax for aspect&", Choice, Id);
elsif Chars (Choice) /= Name_Unit_Symbol then
Error_Msg_N ("expected Unit_Symbol, found&", Choice);
end if;
-- Check the third argument denotes the dimension symbol
Next (Assoc);
Choice := First (Choices (Assoc));
Dim_Symbol := Expression (Assoc);
if Present (Next (Choice))
or else Nkind (Choice) /= N_Identifier
then
Error_Msg_NE ("wrong syntax for aspect&", Choice, Id);
elsif Chars (Choice) /= Name_Dim_Symbol then
Error_Msg_N ("expected Dim_Symbol, found&", Choice);
end if;
-- Positional dimension aggregate
else
Unit_Name := First (Expressions (Dim_Aggr));
Unit_Symbol := Next (Unit_Name);
Dim_Symbol := Next (Unit_Symbol);
end if;
-- Check the first argument for each dimension aggregate is
-- a name.
if Nkind (Unit_Name) = N_Identifier then
Unit_Names (Position) := Chars (Unit_Name);
else
Error_Msg_N ("expected unit name", Unit_Name);
end if;
-- Check the second argument for each dimension aggregate is
-- a string or a character.
if Nkind (Unit_Symbol) not in
N_String_Literal | N_Character_Literal
then
Error_Msg_N
("expected unit symbol (string or character)",
Unit_Symbol);
else
-- String case
if Nkind (Unit_Symbol) = N_String_Literal then
Unit_Symbols (Position) := Strval (Unit_Symbol);
-- Character case
else
Start_String;
Store_String_Char
(UI_To_CC (Char_Literal_Value (Unit_Symbol)));
Unit_Symbols (Position) := End_String;
end if;
-- Verify that the string is not empty
if String_Length (Unit_Symbols (Position)) = 0 then
Error_Msg_N
("empty string not allowed here", Unit_Symbol);
end if;
end if;
-- Check the third argument for each dimension aggregate is
-- a string or a character.
if Nkind (Dim_Symbol) not in
N_String_Literal | N_Character_Literal
then
Error_Msg_N
("expected dimension symbol (string or character)",
Dim_Symbol);
else
-- String case
if Nkind (Dim_Symbol) = N_String_Literal then
Dim_Symbols (Position) := Strval (Dim_Symbol);
-- Character case
else
Start_String;
Store_String_Char
(UI_To_CC (Char_Literal_Value (Dim_Symbol)));
Dim_Symbols (Position) := End_String;
end if;
-- Verify that the string is not empty
if String_Length (Dim_Symbols (Position)) = 0 then
Error_Msg_N ("empty string not allowed here", Dim_Symbol);
end if;
end if;
end if;
end if;
Next (Dim_Aggr);
end loop;
-- STEP 4: Storage of extracted values
-- Check that no errors have been detected during the analysis
if Errors_Count = Serious_Errors_Detected then
Dim_System.Type_Decl := N;
Dim_System.Unit_Names := Unit_Names;
Dim_System.Unit_Symbols := Unit_Symbols;
Dim_System.Dim_Symbols := Dim_Symbols;
Dim_System.Count := Position;
System_Table.Append (Dim_System);
end if;
end Analyze_Aspect_Dimension_System;
-----------------------
-- Analyze_Dimension --
-----------------------
-- This dispatch routine propagates dimensions for each node
procedure Analyze_Dimension (N : Node_Id) is
begin
-- Aspect is an Ada 2012 feature. Note that there is no need to check
-- dimensions for nodes that don't come from source, except for subtype
-- declarations where the dimensions are inherited from the base type,
-- for explicit dereferences generated when expanding iterators, and
-- for object declarations generated for inlining.
if Ada_Version < Ada_2012 then
return;
-- Inlined bodies have already been checked for dimensionality
elsif In_Inlined_Body then
return;
elsif not Comes_From_Source (N) then
if Nkind (N) not in N_Explicit_Dereference
| N_Identifier
| N_Object_Declaration
| N_Subtype_Declaration
then
return;
end if;
end if;
case Nkind (N) is
when N_Assignment_Statement =>
Analyze_Dimension_Assignment_Statement (N);
when N_Binary_Op =>
Analyze_Dimension_Binary_Op (N);
when N_Case_Expression =>
Analyze_Dimension_Case_Expression (N);
when N_Component_Declaration =>
Analyze_Dimension_Component_Declaration (N);
when N_Extended_Return_Statement =>
Analyze_Dimension_Extended_Return_Statement (N);
when N_Attribute_Reference
| N_Expanded_Name
| N_Explicit_Dereference
| N_Function_Call
| N_Indexed_Component
| N_Qualified_Expression
| N_Selected_Component
| N_Slice
| N_Unchecked_Type_Conversion
=>
Analyze_Dimension_Has_Etype (N);
-- In the presence of a repaired syntax error, an identifier may be
-- introduced without a usable type.
when N_Identifier =>
if Present (Etype (N)) then
Analyze_Dimension_Has_Etype (N);
end if;
when N_If_Expression =>
Analyze_Dimension_If_Expression (N);
when N_Number_Declaration =>
Analyze_Dimension_Number_Declaration (N);
when N_Object_Declaration =>
Analyze_Dimension_Object_Declaration (N);
when N_Object_Renaming_Declaration =>
Analyze_Dimension_Object_Renaming_Declaration (N);
when N_Simple_Return_Statement =>
if not Comes_From_Extended_Return_Statement (N) then
Analyze_Dimension_Simple_Return_Statement (N);
end if;
when N_Subtype_Declaration =>
Analyze_Dimension_Subtype_Declaration (N);
when N_Type_Conversion =>
Analyze_Dimension_Type_Conversion (N);
when N_Unary_Op =>
Analyze_Dimension_Unary_Op (N);
when others =>
null;
end case;
end Analyze_Dimension;
---------------------------------------
-- Analyze_Dimension_Array_Aggregate --
---------------------------------------
procedure Analyze_Dimension_Array_Aggregate
(N : Node_Id;
Comp_Typ : Entity_Id)
is
Comp_Ass : constant List_Id := Component_Associations (N);
Dims_Of_Comp_Typ : constant Dimension_Type := Dimensions_Of (Comp_Typ);
Exps : constant List_Id := Expressions (N);
Comp : Node_Id;
Dims_Of_Expr : Dimension_Type;
Expr : Node_Id;
Error_Detected : Boolean := False;
-- This flag is used in order to indicate if an error has been detected
-- so far by the compiler in this routine.
begin
-- Aspect is an Ada 2012 feature. Nothing to do here if the component
-- base type is not a dimensioned type.
-- Inlined bodies have already been checked for dimensionality.
-- Note that here the original node must come from source since the
-- original array aggregate may not have been entirely decorated.
if Ada_Version < Ada_2012
or else In_Inlined_Body
or else not Comes_From_Source (Original_Node (N))
or else not Has_Dimension_System (Base_Type (Comp_Typ))
then
return;
end if;
-- Check whether there is any positional component association
if Is_Empty_List (Exps) then
Comp := First (Comp_Ass);
else
Comp := First (Exps);
end if;
while Present (Comp) loop
-- Get the expression from the component
if Nkind (Comp) = N_Component_Association then
Expr := Expression (Comp);
else
Expr := Comp;
end if;
-- Issue an error if the dimensions of the component type and the
-- dimensions of the component mismatch.
-- Note that we must ensure the expression has been fully analyzed
-- since it may not be decorated at this point. We also don't want to
-- issue the same error message multiple times on the same expression
-- (may happen when an aggregate is converted into a positional
-- aggregate). We also must verify that this is a scalar component,
-- and not a subaggregate of a multidimensional aggregate.
-- The expression may be an identifier that has been copied several
-- times during expansion, its dimensions are those of its type.
if Is_Entity_Name (Expr) then
Dims_Of_Expr := Dimensions_Of (Etype (Expr));
else
Dims_Of_Expr := Dimensions_Of (Expr);
end if;
if Comes_From_Source (Original_Node (Expr))
and then Present (Etype (Expr))
and then Is_Numeric_Type (Etype (Expr))
and then Dims_Of_Expr /= Dims_Of_Comp_Typ
and then Sloc (Comp) /= Sloc (Prev (Comp))
then
-- Check if an error has already been encountered so far
if not Error_Detected then
Error_Msg_N ("dimensions mismatch in array aggregate", N);
Error_Detected := True;
end if;
Error_Msg_N
("\expected dimension " & Dimensions_Msg_Of (Comp_Typ)
& ", found " & Dimensions_Msg_Of (Expr), Expr);
end if;
-- Look at the named components right after the positional components
if not Present (Next (Comp))
and then List_Containing (Comp) = Exps
then
Comp := First (Comp_Ass);
else
Next (Comp);
end if;
end loop;
end Analyze_Dimension_Array_Aggregate;
--------------------------------------------
-- Analyze_Dimension_Assignment_Statement --
--------------------------------------------
procedure Analyze_Dimension_Assignment_Statement (N : Node_Id) is
Lhs : constant Node_Id := Name (N);
Dims_Of_Lhs : constant Dimension_Type := Dimensions_Of (Lhs);
Rhs : constant Node_Id := Expression (N);
Dims_Of_Rhs : constant Dimension_Type := Dimensions_Of (Rhs);
procedure Error_Dim_Msg_For_Assignment_Statement
(N : Node_Id;
Lhs : Node_Id;
Rhs : Node_Id);
-- Error using Error_Msg_N at node N. Output the dimensions of left
-- and right hand sides.
--------------------------------------------
-- Error_Dim_Msg_For_Assignment_Statement --
--------------------------------------------
procedure Error_Dim_Msg_For_Assignment_Statement
(N : Node_Id;
Lhs : Node_Id;
Rhs : Node_Id)
is
begin
Error_Msg_N ("dimensions mismatch in assignment", N);
Error_Msg_N ("\left-hand side " & Dimensions_Msg_Of (Lhs, True), N);
Error_Msg_N ("\right-hand side " & Dimensions_Msg_Of (Rhs, True), N);
end Error_Dim_Msg_For_Assignment_Statement;
-- Start of processing for Analyze_Dimension_Assignment
begin
if Dims_Of_Lhs /= Dims_Of_Rhs then
Error_Dim_Msg_For_Assignment_Statement (N, Lhs, Rhs);
end if;
end Analyze_Dimension_Assignment_Statement;
---------------------------------
-- Analyze_Dimension_Binary_Op --
---------------------------------
-- Check and propagate the dimensions for binary operators
-- Note that when the dimensions mismatch, no dimension is propagated to N.
procedure Analyze_Dimension_Binary_Op (N : Node_Id) is
N_Kind : constant Node_Kind := Nkind (N);
function Dimensions_Of_Operand (N : Node_Id) return Dimension_Type;
-- If the operand is a numeric literal that comes from a declared
-- constant, use the dimensions of the constant which were computed
-- from the expression of the constant declaration. Otherwise the
-- dimensions are those of the operand, or the type of the operand.
-- This takes care of node rewritings from validity checks, where the
-- dimensions of the operand itself may not be preserved, while the
-- type comes from context and must have dimension information.
procedure Error_Dim_Msg_For_Binary_Op (N, L, R : Node_Id);
-- Error using Error_Msg_NE and Error_Msg_N at node N. Output the
-- dimensions of both operands.
---------------------------
-- Dimensions_Of_Operand --
---------------------------
function Dimensions_Of_Operand (N : Node_Id) return Dimension_Type is
Dims : constant Dimension_Type := Dimensions_Of (N);
begin
if Exists (Dims) then
return Dims;
elsif Is_Entity_Name (N) then
return Dimensions_Of (Etype (Entity (N)));
elsif Nkind (N) = N_Real_Literal then
if Present (Original_Entity (N)) then
return Dimensions_Of (Original_Entity (N));
else
return Dimensions_Of (Etype (N));
end if;
-- Otherwise return the default dimensions
else
return Dims;
end if;
end Dimensions_Of_Operand;
---------------------------------
-- Error_Dim_Msg_For_Binary_Op --
---------------------------------
procedure Error_Dim_Msg_For_Binary_Op (N, L, R : Node_Id) is
begin
Error_Msg_NE
("both operands for operation& must have same dimensions",
N, Entity (N));
Error_Msg_N ("\left operand " & Dimensions_Msg_Of (L, True), N);
Error_Msg_N ("\right operand " & Dimensions_Msg_Of (R, True), N);
end Error_Dim_Msg_For_Binary_Op;
-- Start of processing for Analyze_Dimension_Binary_Op
begin
-- If the node is already analyzed, do not examine the operands. At the
-- end of the analysis their dimensions have been removed, and the node
-- itself may have been rewritten.
if Analyzed (N) then
return;
end if;
if N_Kind in N_Op_Add | N_Op_Expon | N_Op_Subtract
| N_Multiplying_Operator | N_Op_Compare
then
declare
L : constant Node_Id := Left_Opnd (N);
Dims_Of_L : constant Dimension_Type :=
Dimensions_Of_Operand (L);
L_Has_Dimensions : constant Boolean := Exists (Dims_Of_L);
R : constant Node_Id := Right_Opnd (N);
Dims_Of_R : constant Dimension_Type :=
Dimensions_Of_Operand (R);
R_Has_Dimensions : constant Boolean := Exists (Dims_Of_R);
Dims_Of_N : Dimension_Type := Null_Dimension;
begin
-- N_Op_Add, N_Op_Mod, N_Op_Rem or N_Op_Subtract case
if N_Kind in N_Op_Add | N_Op_Mod | N_Op_Rem | N_Op_Subtract then
-- Check both operands have same dimension
if Dims_Of_L /= Dims_Of_R then
Error_Dim_Msg_For_Binary_Op (N, L, R);
else
-- Check both operands are not dimensionless
if Exists (Dims_Of_L) then
Set_Dimensions (N, Dims_Of_L);
end if;
end if;
-- N_Op_Multiply or N_Op_Divide case
elsif N_Kind in N_Op_Multiply | N_Op_Divide then
-- Check at least one operand is not dimensionless
if L_Has_Dimensions or R_Has_Dimensions then
-- Multiplication case
-- Get both operands dimensions and add them
if N_Kind = N_Op_Multiply then
for Position in Dimension_Type'Range loop
Dims_Of_N (Position) :=
Dims_Of_L (Position) + Dims_Of_R (Position);
end loop;
-- Division case
-- Get both operands dimensions and subtract them
else
for Position in Dimension_Type'Range loop
Dims_Of_N (Position) :=
Dims_Of_L (Position) - Dims_Of_R (Position);
end loop;
end if;
if Exists (Dims_Of_N) then
Set_Dimensions (N, Dims_Of_N);
end if;
end if;
-- Exponentiation case
-- Note: a rational exponent is allowed for dimensioned operand
elsif N_Kind = N_Op_Expon then
-- Check the left operand is not dimensionless. Note that the
-- value of the exponent must be known compile time. Otherwise,
-- the exponentiation evaluation will return an error message.
if L_Has_Dimensions then
if not Compile_Time_Known_Value (R) then
Error_Msg_N
("exponent of dimensioned operand must be "
& "known at compile time", N);
end if;
declare
Exponent_Value : Rational := Zero;
begin
-- Real operand case
if Is_Real_Type (Etype (L)) then
-- Define the exponent as a Rational number
Exponent_Value := Create_Rational_From (R, False);
-- Verify that the exponent cannot be interpreted
-- as a rational, otherwise interpret the exponent
-- as an integer.
if Exponent_Value = No_Rational then
Exponent_Value :=
+Whole (UI_To_Int (Expr_Value (R)));
end if;
-- Integer operand case.
-- For integer operand, the exponent cannot be
-- interpreted as a rational.
else
Exponent_Value := +Whole (UI_To_Int (Expr_Value (R)));
end if;
for Position in Dimension_Type'Range loop
Dims_Of_N (Position) :=
Dims_Of_L (Position) * Exponent_Value;
end loop;
if Exists (Dims_Of_N) then
Set_Dimensions (N, Dims_Of_N);
end if;
end;
end if;
-- Comparison cases
-- For relational operations, only dimension checking is
-- performed (no propagation). If one operand is the result
-- of constant folding the dimensions may have been lost
-- in a tree copy, so assume that preanalysis has verified
-- that dimensions are correct.
elsif N_Kind in N_Op_Compare then
if (L_Has_Dimensions or R_Has_Dimensions)
and then Dims_Of_L /= Dims_Of_R
then
if Nkind (L) = N_Real_Literal
and then not (Comes_From_Source (L))
and then Expander_Active
then
null;
elsif Nkind (R) = N_Real_Literal
and then not (Comes_From_Source (R))
and then Expander_Active
then
null;
-- Numeric literal case. Issue a warning to indicate the
-- literal is treated as if its dimension matches the type
-- dimension.
elsif Nkind (Original_Node (L)) in
N_Integer_Literal | N_Real_Literal
then
Dim_Warning_For_Numeric_Literal (L, Etype (R));
elsif Nkind (Original_Node (R)) in
N_Integer_Literal | N_Real_Literal
then
Dim_Warning_For_Numeric_Literal (R, Etype (L));
else
Error_Dim_Msg_For_Binary_Op (N, L, R);
end if;
end if;
end if;
-- If expander is active, remove dimension information from each
-- operand, as only dimensions of result are relevant.
if Expander_Active then
Remove_Dimensions (L);
Remove_Dimensions (R);
end if;
end;
end if;
end Analyze_Dimension_Binary_Op;
----------------------------
-- Analyze_Dimension_Call --
----------------------------
procedure Analyze_Dimension_Call (N : Node_Id; Nam : Entity_Id) is
Actuals : constant List_Id := Parameter_Associations (N);
Actual : Node_Id;
Dims_Of_Formal : Dimension_Type;
Formal : Node_Id;
Formal_Typ : Entity_Id;
Error_Detected : Boolean := False;
-- This flag is used in order to indicate if an error has been detected
-- so far by the compiler in this routine.
begin
-- Aspect is an Ada 2012 feature. Note that there is no need to check
-- dimensions for calls in inlined bodies, or calls that don't come
-- from source, or those that may have semantic errors.
if Ada_Version < Ada_2012
or else In_Inlined_Body
or else not Comes_From_Source (N)
or else Error_Posted (N)
then
return;
end if;
-- Check the dimensions of the actuals, if any
if not Is_Empty_List (Actuals) then
-- Special processing for elementary functions
-- For Sqrt call, the resulting dimensions equal to half the
-- dimensions of the actual. For all other elementary calls, this
-- routine check that every actual is dimensionless.
if Nkind (N) = N_Function_Call then
Elementary_Function_Calls : declare
Dims_Of_Call : Dimension_Type;
Ent : Entity_Id := Nam;
function Is_Elementary_Function_Entity
(Sub_Id : Entity_Id) return Boolean;
-- Given Sub_Id, the original subprogram entity, return True
-- if call is to an elementary function (see Ada.Numerics.
-- Generic_Elementary_Functions).
-----------------------------------
-- Is_Elementary_Function_Entity --
-----------------------------------
function Is_Elementary_Function_Entity
(Sub_Id : Entity_Id) return Boolean
is
Loc : constant Source_Ptr := Sloc (Sub_Id);
begin
-- Is entity in Ada.Numerics.Generic_Elementary_Functions?
return
Loc > No_Location
and then
Is_RTU
(Cunit_Entity (Get_Source_Unit (Loc)),
Ada_Numerics_Generic_Elementary_Functions);
end Is_Elementary_Function_Entity;
-- Start of processing for Elementary_Function_Calls
begin
-- Get original subprogram entity following the renaming chain
if Present (Alias (Ent)) then
Ent := Alias (Ent);
end if;
-- Check the call is an Elementary function call
if Is_Elementary_Function_Entity (Ent) then
-- Sqrt function call case
if Chars (Ent) = Name_Sqrt then
Dims_Of_Call := Dimensions_Of (First_Actual (N));
-- Evaluates the resulting dimensions (i.e. half the
-- dimensions of the actual).
if Exists (Dims_Of_Call) then
for Position in Dims_Of_Call'Range loop
Dims_Of_Call (Position) :=
Dims_Of_Call (Position) *
Rational'(Numerator => 1, Denominator => 2);
end loop;
Set_Dimensions (N, Dims_Of_Call);
end if;
-- All other elementary functions case. Note that every
-- actual here should be dimensionless.
else
Actual := First_Actual (N);
while Present (Actual) loop
if Exists (Dimensions_Of (Actual)) then
-- Check if error has already been encountered
if not Error_Detected then
Error_Msg_NE
("dimensions mismatch in call of&",
N, Name (N));
Error_Detected := True;
end if;
Error_Msg_N
("\expected dimension '['], found "
& Dimensions_Msg_Of (Actual), Actual);
end if;
Next_Actual (Actual);
end loop;
end if;
-- Nothing more to do for elementary functions
return;
end if;
end Elementary_Function_Calls;
end if;
-- General case. Check, for each parameter, the dimensions of the
-- actual and its corresponding formal match. Otherwise, complain.
Actual := First_Actual (N);
Formal := First_Formal (Nam);
while Present (Formal) loop
-- A missing corresponding actual indicates that the analysis of
-- the call was aborted due to a previous error.
if No (Actual) then
Check_Error_Detected;
return;
end if;
Formal_Typ := Etype (Formal);
Dims_Of_Formal := Dimensions_Of (Formal_Typ);
-- If the formal is not dimensionless, check dimensions of formal
-- and actual match. Otherwise, complain.
if Exists (Dims_Of_Formal)
and then Dimensions_Of (Actual) /= Dims_Of_Formal
then
-- Check if an error has already been encountered so far
if not Error_Detected then
Error_Msg_NE ("dimensions mismatch in& call", N, Name (N));
Error_Detected := True;
end if;
Error_Msg_N
("\expected dimension " & Dimensions_Msg_Of (Formal_Typ)
& ", found " & Dimensions_Msg_Of (Actual), Actual);
end if;
Next_Actual (Actual);
Next_Formal (Formal);
end loop;
end if;
-- For function calls, propagate the dimensions from the returned type
if Nkind (N) = N_Function_Call then
Analyze_Dimension_Has_Etype (N);
end if;
end Analyze_Dimension_Call;
---------------------------------------
-- Analyze_Dimension_Case_Expression --
---------------------------------------
procedure Analyze_Dimension_Case_Expression (N : Node_Id) is
Frst : constant Node_Id := First (Alternatives (N));
Frst_Expr : constant Node_Id := Expression (Frst);
Dims : constant Dimension_Type := Dimensions_Of (Frst_Expr);
Alt : Node_Id;
begin
Alt := Next (Frst);
while Present (Alt) loop
if Dimensions_Of (Expression (Alt)) /= Dims then
Error_Msg_N ("dimension mismatch in case expression", Alt);
exit;
end if;
Next (Alt);
end loop;
Copy_Dimensions (Frst_Expr, N);
end Analyze_Dimension_Case_Expression;
---------------------------------------------
-- Analyze_Dimension_Component_Declaration --
---------------------------------------------
procedure Analyze_Dimension_Component_Declaration (N : Node_Id) is
Expr : constant Node_Id := Expression (N);
Id : constant Entity_Id := Defining_Identifier (N);
Etyp : constant Entity_Id := Etype (Id);
Dims_Of_Etyp : constant Dimension_Type := Dimensions_Of (Etyp);
Dims_Of_Expr : Dimension_Type;
procedure Error_Dim_Msg_For_Component_Declaration
(N : Node_Id;
Etyp : Entity_Id;
Expr : Node_Id);
-- Error using Error_Msg_N at node N. Output the dimensions of the
-- type Etyp and the expression Expr of N.
---------------------------------------------
-- Error_Dim_Msg_For_Component_Declaration --
---------------------------------------------
procedure Error_Dim_Msg_For_Component_Declaration
(N : Node_Id;
Etyp : Entity_Id;
Expr : Node_Id) is
begin
Error_Msg_N ("dimensions mismatch in component declaration", N);
Error_Msg_N
("\expected dimension " & Dimensions_Msg_Of (Etyp) & ", found "
& Dimensions_Msg_Of (Expr), Expr);
end Error_Dim_Msg_For_Component_Declaration;
-- Start of processing for Analyze_Dimension_Component_Declaration
begin
-- Expression is present
if Present (Expr) then
Dims_Of_Expr := Dimensions_Of (Expr);
-- Check dimensions match
if Dims_Of_Etyp /= Dims_Of_Expr then
-- Numeric literal case. Issue a warning if the object type is not
-- dimensionless to indicate the literal is treated as if its
-- dimension matches the type dimension.
if Nkind (Original_Node (Expr)) in
N_Real_Literal | N_Integer_Literal
then
Dim_Warning_For_Numeric_Literal (Expr, Etyp);
-- Issue a dimension mismatch error for all other cases
else
Error_Dim_Msg_For_Component_Declaration (N, Etyp, Expr);
end if;
end if;
end if;
end Analyze_Dimension_Component_Declaration;
-------------------------------------------------
-- Analyze_Dimension_Extended_Return_Statement --
-------------------------------------------------
procedure Analyze_Dimension_Extended_Return_Statement (N : Node_Id) is
Return_Ent : constant Entity_Id := Return_Statement_Entity (N);
Return_Etyp : constant Entity_Id :=
Etype (Return_Applies_To (Return_Ent));
Return_Obj_Decls : constant List_Id := Return_Object_Declarations (N);
Return_Obj_Decl : Node_Id;
Return_Obj_Id : Entity_Id;
Return_Obj_Typ : Entity_Id;
procedure Error_Dim_Msg_For_Extended_Return_Statement
(N : Node_Id;
Return_Etyp : Entity_Id;
Return_Obj_Typ : Entity_Id);
-- Error using Error_Msg_N at node N. Output dimensions of the returned
-- type Return_Etyp and the returned object type Return_Obj_Typ of N.
-------------------------------------------------
-- Error_Dim_Msg_For_Extended_Return_Statement --
-------------------------------------------------
procedure Error_Dim_Msg_For_Extended_Return_Statement
(N : Node_Id;
Return_Etyp : Entity_Id;
Return_Obj_Typ : Entity_Id)
is
begin
Error_Msg_N ("dimensions mismatch in extended return statement", N);
Error_Msg_N
("\expected dimension " & Dimensions_Msg_Of (Return_Etyp)
& ", found " & Dimensions_Msg_Of (Return_Obj_Typ), N);
end Error_Dim_Msg_For_Extended_Return_Statement;
-- Start of processing for Analyze_Dimension_Extended_Return_Statement
begin
if Present (Return_Obj_Decls) then
Return_Obj_Decl := First (Return_Obj_Decls);
while Present (Return_Obj_Decl) loop
if Nkind (Return_Obj_Decl) = N_Object_Declaration then
Return_Obj_Id := Defining_Identifier (Return_Obj_Decl);
if Is_Return_Object (Return_Obj_Id) then
Return_Obj_Typ := Etype (Return_Obj_Id);
-- Issue an error message if dimensions mismatch
if Dimensions_Of (Return_Etyp) /=
Dimensions_Of (Return_Obj_Typ)
then
Error_Dim_Msg_For_Extended_Return_Statement
(N, Return_Etyp, Return_Obj_Typ);
return;
end if;
end if;
end if;
Next (Return_Obj_Decl);
end loop;
end if;
end Analyze_Dimension_Extended_Return_Statement;
-----------------------------------------------------
-- Analyze_Dimension_Extension_Or_Record_Aggregate --
-----------------------------------------------------
procedure Analyze_Dimension_Extension_Or_Record_Aggregate (N : Node_Id) is
Comp : Node_Id;
Comp_Id : Entity_Id;
Comp_Typ : Entity_Id;
Expr : Node_Id;
Error_Detected : Boolean := False;
-- This flag is used in order to indicate if an error has been detected
-- so far by the compiler in this routine.
begin
-- Aspect is an Ada 2012 feature. Note that there is no need to check
-- dimensions in inlined bodies, or for aggregates that don't come
-- from source, or if we are within an initialization procedure, whose
-- expressions have been checked at the point of record declaration.
if Ada_Version < Ada_2012
or else In_Inlined_Body
or else not Comes_From_Source (N)
or else Inside_Init_Proc
then
return;
end if;
Comp := First (Component_Associations (N));
while Present (Comp) loop
Comp_Id := Entity (First (Choices (Comp)));
Comp_Typ := Etype (Comp_Id);
-- Check the component type is either a dimensioned type or a
-- dimensioned subtype.
if Has_Dimension_System (Base_Type (Comp_Typ)) then
Expr := Expression (Comp);
-- A box-initialized component needs no checking.
if No (Expr) and then Box_Present (Comp) then
null;
-- Issue an error if the dimensions of the component type and the
-- dimensions of the component mismatch.
elsif Dimensions_Of (Expr) /= Dimensions_Of (Comp_Typ) then
-- Check if an error has already been encountered so far
if not Error_Detected then
-- Extension aggregate case
if Nkind (N) = N_Extension_Aggregate then
Error_Msg_N
("dimensions mismatch in extension aggregate", N);
-- Record aggregate case
else
Error_Msg_N
("dimensions mismatch in record aggregate", N);
end if;
Error_Detected := True;
end if;
Error_Msg_N
("\expected dimension " & Dimensions_Msg_Of (Comp_Typ)
& ", found " & Dimensions_Msg_Of (Expr), Comp);
end if;
end if;
Next (Comp);
end loop;
end Analyze_Dimension_Extension_Or_Record_Aggregate;
-------------------------------
-- Analyze_Dimension_Formals --
-------------------------------
procedure Analyze_Dimension_Formals (N : Node_Id; Formals : List_Id) is
Dims_Of_Typ : Dimension_Type;
Formal : Node_Id;
Typ : Entity_Id;
begin
-- Aspect is an Ada 2012 feature. Note that there is no need to check
-- dimensions for sub specs that don't come from source.
if Ada_Version < Ada_2012 or else not Comes_From_Source (N) then
return;
end if;
Formal := First (Formals);
while Present (Formal) loop
Typ := Parameter_Type (Formal);
Dims_Of_Typ := Dimensions_Of (Typ);
if Exists (Dims_Of_Typ) then
declare
Expr : constant Node_Id := Expression (Formal);
begin
-- Issue a warning if Expr is a numeric literal and if its
-- dimensions differ with the dimensions of the formal type.
if Present (Expr)
and then Dims_Of_Typ /= Dimensions_Of (Expr)
and then Nkind (Original_Node (Expr)) in
N_Real_Literal | N_Integer_Literal
then
Dim_Warning_For_Numeric_Literal (Expr, Etype (Typ));
end if;
end;
end if;
Next (Formal);
end loop;
end Analyze_Dimension_Formals;
---------------------------------
-- Analyze_Dimension_Has_Etype --
---------------------------------
procedure Analyze_Dimension_Has_Etype (N : Node_Id) is
Etyp : constant Entity_Id := Etype (N);
Dims_Of_Etyp : Dimension_Type := Dimensions_Of (Etyp);
begin
-- General case. Propagation of the dimensions from the type
if Exists (Dims_Of_Etyp) then
Set_Dimensions (N, Dims_Of_Etyp);
-- Identifier case. Propagate the dimensions from the entity for
-- identifier whose entity is a non-dimensionless constant.
elsif Nkind (N) = N_Identifier then
Analyze_Dimension_Identifier : declare
Id : constant Entity_Id := Entity (N);
begin
-- If Id is missing, abnormal tree, assume previous error
if No (Id) then
Check_Error_Detected;
return;
elsif Ekind (Id) in E_Constant | E_Named_Real
and then Exists (Dimensions_Of (Id))
then
Set_Dimensions (N, Dimensions_Of (Id));
end if;
end Analyze_Dimension_Identifier;
-- Attribute reference case. Propagate the dimensions from the prefix.
elsif Nkind (N) = N_Attribute_Reference
and then Has_Dimension_System (Base_Type (Etyp))
then
Dims_Of_Etyp := Dimensions_Of (Prefix (N));
-- Check the prefix is not dimensionless
if Exists (Dims_Of_Etyp) then
Set_Dimensions (N, Dims_Of_Etyp);
end if;
end if;
-- Remove dimensions from inner expressions, to prevent dimensions
-- table from growing uselessly.
case Nkind (N) is
when N_Attribute_Reference
| N_Indexed_Component
=>
declare
Exprs : constant List_Id := Expressions (N);
Expr : Node_Id;
begin
if Present (Exprs) then
Expr := First (Exprs);
while Present (Expr) loop
Remove_Dimensions (Expr);
Next (Expr);
end loop;
end if;
end;
when N_Qualified_Expression
| N_Type_Conversion
| N_Unchecked_Type_Conversion
=>
Remove_Dimensions (Expression (N));
when N_Selected_Component =>
Remove_Dimensions (Selector_Name (N));
when others =>
null;
end case;
end Analyze_Dimension_Has_Etype;
-------------------------------------
-- Analyze_Dimension_If_Expression --
-------------------------------------
procedure Analyze_Dimension_If_Expression (N : Node_Id) is
Then_Expr : constant Node_Id := Next (First (Expressions (N)));
Else_Expr : constant Node_Id := Next (Then_Expr);
begin
if Dimensions_Of (Then_Expr) /= Dimensions_Of (Else_Expr) then
Error_Msg_N ("dimensions mismatch in conditional expression", N);
else
Copy_Dimensions (Then_Expr, N);
end if;
end Analyze_Dimension_If_Expression;
------------------------------------------
-- Analyze_Dimension_Number_Declaration --
------------------------------------------
procedure Analyze_Dimension_Number_Declaration (N : Node_Id) is
Expr : constant Node_Id := Expression (N);
Id : constant Entity_Id := Defining_Identifier (N);
Dim_Of_Expr : constant Dimension_Type := Dimensions_Of (Expr);
begin
if Exists (Dim_Of_Expr) then
Set_Dimensions (Id, Dim_Of_Expr);
Set_Etype (Id, Etype (Expr));
end if;
end Analyze_Dimension_Number_Declaration;
------------------------------------------
-- Analyze_Dimension_Object_Declaration --
------------------------------------------
procedure Analyze_Dimension_Object_Declaration (N : Node_Id) is
Expr : constant Node_Id := Expression (N);
Id : constant Entity_Id := Defining_Identifier (N);
Etyp : constant Entity_Id := Etype (Id);
Dim_Of_Etyp : constant Dimension_Type := Dimensions_Of (Etyp);
Dim_Of_Expr : Dimension_Type;
procedure Error_Dim_Msg_For_Object_Declaration
(N : Node_Id;
Etyp : Entity_Id;
Expr : Node_Id);
-- Error using Error_Msg_N at node N. Output the dimensions of the
-- type Etyp and of the expression Expr.
------------------------------------------
-- Error_Dim_Msg_For_Object_Declaration --
------------------------------------------
procedure Error_Dim_Msg_For_Object_Declaration
(N : Node_Id;
Etyp : Entity_Id;
Expr : Node_Id) is
begin
Error_Msg_N ("dimensions mismatch in object declaration", N);
Error_Msg_N
("\expected dimension " & Dimensions_Msg_Of (Etyp) & ", found "
& Dimensions_Msg_Of (Expr), Expr);
end Error_Dim_Msg_For_Object_Declaration;
-- Start of processing for Analyze_Dimension_Object_Declaration
begin
-- Expression is present
if Present (Expr) then
Dim_Of_Expr := Dimensions_Of (Expr);
-- Check dimensions match
if Dim_Of_Expr /= Dim_Of_Etyp then
-- Numeric literal case. Issue a warning if the object type is
-- not dimensionless to indicate the literal is treated as if
-- its dimension matches the type dimension.
if Nkind (Original_Node (Expr)) in
N_Real_Literal | N_Integer_Literal
then
Dim_Warning_For_Numeric_Literal (Expr, Etyp);
-- Case of object is a constant whose type is a dimensioned type
elsif Constant_Present (N) and then not Exists (Dim_Of_Etyp) then
-- Propagate dimension from expression to object entity
Set_Dimensions (Id, Dim_Of_Expr);
-- Expression may have been constant-folded. If nominal type has
-- dimensions, verify that expression has same type.
elsif Exists (Dim_Of_Etyp) and then Etype (Expr) = Etyp then
null;
-- For all other cases, issue an error message
else
Error_Dim_Msg_For_Object_Declaration (N, Etyp, Expr);
end if;
end if;
-- Remove dimensions in expression after checking consistency with
-- given type.
Remove_Dimensions (Expr);
end if;
end Analyze_Dimension_Object_Declaration;
---------------------------------------------------
-- Analyze_Dimension_Object_Renaming_Declaration --
---------------------------------------------------
procedure Analyze_Dimension_Object_Renaming_Declaration (N : Node_Id) is
Renamed_Name : constant Node_Id := Name (N);
Sub_Mark : constant Node_Id := Subtype_Mark (N);
procedure Error_Dim_Msg_For_Object_Renaming_Declaration
(N : Node_Id;
Sub_Mark : Node_Id;
Renamed_Name : Node_Id);
-- Error using Error_Msg_N at node N. Output the dimensions of
-- Sub_Mark and of Renamed_Name.
---------------------------------------------------
-- Error_Dim_Msg_For_Object_Renaming_Declaration --
---------------------------------------------------
procedure Error_Dim_Msg_For_Object_Renaming_Declaration
(N : Node_Id;
Sub_Mark : Node_Id;
Renamed_Name : Node_Id) is
begin
Error_Msg_N ("dimensions mismatch in object renaming declaration", N);
Error_Msg_N
("\expected dimension " & Dimensions_Msg_Of (Sub_Mark) & ", found "
& Dimensions_Msg_Of (Renamed_Name), Renamed_Name);
end Error_Dim_Msg_For_Object_Renaming_Declaration;
-- Start of processing for Analyze_Dimension_Object_Renaming_Declaration
begin
if Dimensions_Of (Renamed_Name) /= Dimensions_Of (Sub_Mark) then
Error_Dim_Msg_For_Object_Renaming_Declaration
(N, Sub_Mark, Renamed_Name);
end if;
end Analyze_Dimension_Object_Renaming_Declaration;
-----------------------------------------------
-- Analyze_Dimension_Simple_Return_Statement --
-----------------------------------------------
procedure Analyze_Dimension_Simple_Return_Statement (N : Node_Id) is
Expr : constant Node_Id := Expression (N);
Return_Ent : constant Entity_Id := Return_Statement_Entity (N);
Return_Etyp : constant Entity_Id :=
Etype (Return_Applies_To (Return_Ent));
Dims_Of_Return_Etyp : constant Dimension_Type :=
Dimensions_Of (Return_Etyp);
procedure Error_Dim_Msg_For_Simple_Return_Statement
(N : Node_Id;
Return_Etyp : Entity_Id;
Expr : Node_Id);
-- Error using Error_Msg_N at node N. Output the dimensions of the
-- returned type Return_Etyp and the returned expression Expr of N.
-----------------------------------------------
-- Error_Dim_Msg_For_Simple_Return_Statement --
-----------------------------------------------
procedure Error_Dim_Msg_For_Simple_Return_Statement
(N : Node_Id;
Return_Etyp : Entity_Id;
Expr : Node_Id)
is
begin
Error_Msg_N ("dimensions mismatch in return statement", N);
Error_Msg_N
("\expected dimension " & Dimensions_Msg_Of (Return_Etyp)
& ", found " & Dimensions_Msg_Of (Expr), Expr);
end Error_Dim_Msg_For_Simple_Return_Statement;
-- Start of processing for Analyze_Dimension_Simple_Return_Statement
begin
if Dims_Of_Return_Etyp /= Dimensions_Of (Expr) then
Error_Dim_Msg_For_Simple_Return_Statement (N, Return_Etyp, Expr);
Remove_Dimensions (Expr);
end if;
end Analyze_Dimension_Simple_Return_Statement;
-------------------------------------------
-- Analyze_Dimension_Subtype_Declaration --
-------------------------------------------
procedure Analyze_Dimension_Subtype_Declaration (N : Node_Id) is
Id : constant Entity_Id := Defining_Identifier (N);
Dims_Of_Id : constant Dimension_Type := Dimensions_Of (Id);
Dims_Of_Etyp : Dimension_Type;
Etyp : Node_Id;
begin
-- No constraint case in subtype declaration
if Nkind (Subtype_Indication (N)) /= N_Subtype_Indication then
Etyp := Etype (Subtype_Indication (N));
Dims_Of_Etyp := Dimensions_Of (Etyp);
if Exists (Dims_Of_Etyp) then
-- If subtype already has a dimension (from Aspect_Dimension), it
-- cannot inherit different dimensions from its subtype.
if Exists (Dims_Of_Id) and then Dims_Of_Etyp /= Dims_Of_Id then
Error_Msg_NE
("subtype& already " & Dimensions_Msg_Of (Id, True), N, Id);
else
Set_Dimensions (Id, Dims_Of_Etyp);
Set_Symbol (Id, Symbol_Of (Etyp));
end if;
end if;
-- Constraint present in subtype declaration
else
Etyp := Etype (Subtype_Mark (Subtype_Indication (N)));
Dims_Of_Etyp := Dimensions_Of (Etyp);
if Exists (Dims_Of_Etyp) then
Set_Dimensions (Id, Dims_Of_Etyp);
Set_Symbol (Id, Symbol_Of (Etyp));
end if;
end if;
end Analyze_Dimension_Subtype_Declaration;
---------------------------------------
-- Analyze_Dimension_Type_Conversion --
---------------------------------------
procedure Analyze_Dimension_Type_Conversion (N : Node_Id) is
Expr_Root : constant Entity_Id :=
Dimension_System_Root (Etype (Expression (N)));
Target_Root : constant Entity_Id :=
Dimension_System_Root (Etype (N));
begin
-- If the expression has dimensions and the target type has dimensions,
-- the conversion has the dimensions of the expression. Consistency is
-- checked below. Converting to a non-dimensioned type such as Float
-- ignores the dimensions of the expression.
if Exists (Dimensions_Of (Expression (N)))
and then Present (Target_Root)
then
Set_Dimensions (N, Dimensions_Of (Expression (N)));
-- Otherwise the dimensions are those of the target type.
else
Analyze_Dimension_Has_Etype (N);
end if;
-- A conversion between types in different dimension systems (e.g. MKS
-- and British units) must respect the dimensions of expression and
-- type, It is up to the user to provide proper conversion factors.
-- Upward conversions to root type of a dimensioned system are legal,
-- and correspond to "view conversions", i.e. preserve the dimensions
-- of the expression; otherwise conversion must be between types with
-- then same dimensions. Conversions to a non-dimensioned type such as
-- Float lose the dimensions of the expression.
if Present (Expr_Root)
and then Present (Target_Root)
and then Etype (N) /= Target_Root
and then Dimensions_Of (Expression (N)) /= Dimensions_Of (Etype (N))
then
Error_Msg_N ("dimensions mismatch in conversion", N);
Error_Msg_N
("\expression " & Dimensions_Msg_Of (Expression (N), True), N);
Error_Msg_N
("\target type " & Dimensions_Msg_Of (Etype (N), True), N);
end if;
end Analyze_Dimension_Type_Conversion;
--------------------------------
-- Analyze_Dimension_Unary_Op --
--------------------------------
procedure Analyze_Dimension_Unary_Op (N : Node_Id) is
begin
case Nkind (N) is
-- Propagate the dimension if the operand is not dimensionless
when N_Op_Abs
| N_Op_Minus
| N_Op_Plus
=>
declare
R : constant Node_Id := Right_Opnd (N);
begin
Move_Dimensions (R, N);
end;
when others =>
null;
end case;
end Analyze_Dimension_Unary_Op;
---------------------------------
-- Check_Expression_Dimensions --
---------------------------------
procedure Check_Expression_Dimensions
(Expr : Node_Id;
Typ : Entity_Id)
is
begin
if Is_Floating_Point_Type (Etype (Expr)) then
Analyze_Dimension (Expr);
if Dimensions_Of (Expr) /= Dimensions_Of (Typ) then
Error_Msg_N ("dimensions mismatch in array aggregate", Expr);
Error_Msg_N
("\expected dimension " & Dimensions_Msg_Of (Typ)
& ", found " & Dimensions_Msg_Of (Expr), Expr);
end if;
end if;
end Check_Expression_Dimensions;
---------------------
-- Copy_Dimensions --
---------------------
procedure Copy_Dimensions (From : Node_Id; To : Node_Id) is
Dims_Of_From : constant Dimension_Type := Dimensions_Of (From);
begin
-- Ignore if not Ada 2012 or beyond
if Ada_Version < Ada_2012 then
return;
-- For Ada 2012, Copy the dimension of 'From to 'To'
elsif Exists (Dims_Of_From) then
Set_Dimensions (To, Dims_Of_From);
end if;
end Copy_Dimensions;
-----------------------------------
-- Copy_Dimensions_Of_Components --
-----------------------------------
procedure Copy_Dimensions_Of_Components (Rec : Entity_Id) is
C : Entity_Id;
begin
C := First_Component (Rec);
while Present (C) loop
if Nkind (Parent (C)) = N_Component_Declaration then
Copy_Dimensions
(Expression (Parent (Corresponding_Record_Component (C))),
Expression (Parent (C)));
end if;
Next_Component (C);
end loop;
end Copy_Dimensions_Of_Components;
--------------------------
-- Create_Rational_From --
--------------------------
-- RATIONAL ::= [-] NUMERAL [/ NUMERAL]
-- A rational number is a number that can be expressed as the quotient or
-- fraction a/b of two integers, where b is non-zero positive.
function Create_Rational_From
(Expr : Node_Id;
Complain : Boolean) return Rational
is
Or_Node_Of_Expr : constant Node_Id := Original_Node (Expr);
Result : Rational := No_Rational;
function Process_Minus (N : Node_Id) return Rational;
-- Create a rational from a N_Op_Minus node
function Process_Divide (N : Node_Id) return Rational;
-- Create a rational from a N_Op_Divide node
function Process_Literal (N : Node_Id) return Rational;
-- Create a rational from a N_Integer_Literal node
-------------------
-- Process_Minus --
-------------------
function Process_Minus (N : Node_Id) return Rational is
Right : constant Node_Id := Original_Node (Right_Opnd (N));
Result : Rational;
begin
-- Operand is an integer literal
if Nkind (Right) = N_Integer_Literal then
Result := -Process_Literal (Right);
-- Operand is a divide operator
elsif Nkind (Right) = N_Op_Divide then
Result := -Process_Divide (Right);
else
Result := No_Rational;
end if;
return Result;
end Process_Minus;
--------------------
-- Process_Divide --
--------------------
function Process_Divide (N : Node_Id) return Rational is
Left : constant Node_Id := Original_Node (Left_Opnd (N));
Right : constant Node_Id := Original_Node (Right_Opnd (N));
Left_Rat : Rational;
Result : Rational := No_Rational;
Right_Rat : Rational;
begin
-- Both left and right operands are integer literals
if Nkind (Left) = N_Integer_Literal
and then
Nkind (Right) = N_Integer_Literal
then
Left_Rat := Process_Literal (Left);
Right_Rat := Process_Literal (Right);
Result := Left_Rat / Right_Rat;
end if;
return Result;
end Process_Divide;
---------------------
-- Process_Literal --
---------------------
function Process_Literal (N : Node_Id) return Rational is
begin
return +Whole (UI_To_Int (Intval (N)));
end Process_Literal;
-- Start of processing for Create_Rational_From
begin
-- Check the expression is either a division of two integers or an
-- integer itself. Note that the check applies to the original node
-- since the node could have already been rewritten.
-- Integer literal case
if Nkind (Or_Node_Of_Expr) = N_Integer_Literal then
Result := Process_Literal (Or_Node_Of_Expr);
-- Divide operator case
elsif Nkind (Or_Node_Of_Expr) = N_Op_Divide then
Result := Process_Divide (Or_Node_Of_Expr);
-- Minus operator case
elsif Nkind (Or_Node_Of_Expr) = N_Op_Minus then
Result := Process_Minus (Or_Node_Of_Expr);
end if;
-- When Expr cannot be interpreted as a rational and Complain is true,
-- generate an error message.
if Complain and then Result = No_Rational then
Error_Msg_N ("rational expected", Expr);
end if;
return Result;
end Create_Rational_From;
-------------------
-- Dimensions_Of --
-------------------
function Dimensions_Of (N : Node_Id) return Dimension_Type is
begin
return Dimension_Table.Get (N);
end Dimensions_Of;
-----------------------
-- Dimensions_Msg_Of --
-----------------------
function Dimensions_Msg_Of
(N : Node_Id;
Description_Needed : Boolean := False) return String
is
Dims_Of_N : constant Dimension_Type := Dimensions_Of (N);
Dimensions_Msg : Name_Id;
System : System_Type;
begin
-- Initialization of Name_Buffer
Name_Len := 0;
-- N is not dimensionless
if Exists (Dims_Of_N) then
System := System_Of (Base_Type (Etype (N)));
-- When Description_Needed, add to string "has dimension " before the
-- actual dimension.
if Description_Needed then
Add_Str_To_Name_Buffer ("has dimension ");
end if;
Append
(Global_Name_Buffer,
From_Dim_To_Str_Of_Dim_Symbols (Dims_Of_N, System, True));
-- N is dimensionless
-- When Description_Needed, return "is dimensionless"
elsif Description_Needed then
Add_Str_To_Name_Buffer ("is dimensionless");
-- Otherwise, return "'[']"
else
Add_Str_To_Name_Buffer ("'[']");
end if;
Dimensions_Msg := Name_Find;
return Get_Name_String (Dimensions_Msg);
end Dimensions_Msg_Of;
--------------------------
-- Dimension_Table_Hash --
--------------------------
function Dimension_Table_Hash
(Key : Node_Id) return Dimension_Table_Range
is
begin
return Dimension_Table_Range (Key mod 511);
end Dimension_Table_Hash;
-------------------------------------
-- Dim_Warning_For_Numeric_Literal --
-------------------------------------
procedure Dim_Warning_For_Numeric_Literal (N : Node_Id; Typ : Entity_Id) is
begin
-- Consider the literal zero (integer 0 or real 0.0) to be of any
-- dimension.
case Nkind (Original_Node (N)) is
when N_Real_Literal =>
if Expr_Value_R (N) = Ureal_0 then
return;
end if;
when N_Integer_Literal =>
if Expr_Value (N) = Uint_0 then
return;
end if;
when others =>
null;
end case;
-- Initialize name buffer
Name_Len := 0;
Append (Global_Name_Buffer, String_From_Numeric_Literal (N));
-- Insert a blank between the literal and the symbol
Add_Char_To_Name_Buffer (' ');
Append (Global_Name_Buffer, Symbol_Of (Typ));
Error_Msg_Name_1 := Name_Find;
Error_Msg_N ("assumed to be%%??", N);
end Dim_Warning_For_Numeric_Literal;
----------------------
-- Dimensions_Match --
----------------------
function Dimensions_Match (T1 : Entity_Id; T2 : Entity_Id) return Boolean is
begin
return
not Has_Dimension_System (Base_Type (T1))
or else Dimensions_Of (T1) = Dimensions_Of (T2);
end Dimensions_Match;
---------------------------
-- Dimension_System_Root --
---------------------------
function Dimension_System_Root (T : Entity_Id) return Entity_Id is
Root : Entity_Id;
begin
Root := Base_Type (T);
if Has_Dimension_System (Root) then
return First_Subtype (Root); -- for example Dim_Mks
else
return Empty;
end if;
end Dimension_System_Root;
----------------------------------------
-- Eval_Op_Expon_For_Dimensioned_Type --
----------------------------------------
-- Evaluate the expon operator for real dimensioned type.
-- Note that if the exponent is an integer (denominator = 1) the node is
-- evaluated by the regular Eval_Op_Expon routine (see Sem_Eval).
procedure Eval_Op_Expon_For_Dimensioned_Type
(N : Node_Id;
Btyp : Entity_Id)
is
R : constant Node_Id := Right_Opnd (N);
R_Value : Rational := No_Rational;
begin
if Is_Real_Type (Btyp) then
R_Value := Create_Rational_From (R, False);
end if;
-- Check that the exponent is not an integer
if R_Value /= No_Rational and then R_Value.Denominator /= 1 then
Eval_Op_Expon_With_Rational_Exponent (N, R_Value);
else
Eval_Op_Expon (N);
end if;
end Eval_Op_Expon_For_Dimensioned_Type;
------------------------------------------
-- Eval_Op_Expon_With_Rational_Exponent --
------------------------------------------
-- For dimensioned operand in exponentiation, exponent is allowed to be a
-- Rational and not only an Integer like for dimensionless operands. For
-- that particular case, the left operand is rewritten as a function call
-- using the function Expon_LLF from s-llflex.ads.
procedure Eval_Op_Expon_With_Rational_Exponent
(N : Node_Id;
Exponent_Value : Rational)
is
Loc : constant Source_Ptr := Sloc (N);
Dims_Of_N : constant Dimension_Type := Dimensions_Of (N);
L : constant Node_Id := Left_Opnd (N);
Etyp_Of_L : constant Entity_Id := Etype (L);
Btyp_Of_L : constant Entity_Id := Base_Type (Etyp_Of_L);
Actual_1 : Node_Id;
Actual_2 : Node_Id;
Dim_Power : Rational;
List_Of_Dims : List_Id;
New_Aspect : Node_Id;
New_Aspects : List_Id;
New_Id : Entity_Id;
New_N : Node_Id;
New_Subtyp_Decl_For_L : Node_Id;
System : System_Type;
begin
-- Case when the operand is not dimensionless
if Exists (Dims_Of_N) then
-- Get the corresponding System_Type to know the exact number of
-- dimensions in the system.
System := System_Of (Btyp_Of_L);
-- Generation of a new subtype with the proper dimensions
-- In order to rewrite the operator as a type conversion, a new
-- dimensioned subtype with the resulting dimensions of the
-- exponentiation must be created.
-- Generate:
-- Btyp_Of_L : constant Entity_Id := Base_Type (Etyp_Of_L);
-- System : constant System_Id :=
-- Get_Dimension_System_Id (Btyp_Of_L);
-- Num_Of_Dims : constant Number_Of_Dimensions :=
-- Dimension_Systems.Table (System).Dimension_Count;
-- subtype T is Btyp_Of_L
-- with
-- Dimension => (
-- Dims_Of_N (1).Numerator / Dims_Of_N (1).Denominator,
-- Dims_Of_N (2).Numerator / Dims_Of_N (2).Denominator,
-- ...
-- Dims_Of_N (Num_Of_Dims).Numerator /
-- Dims_Of_N (Num_Of_Dims).Denominator);
-- Step 1: Generate the new aggregate for the aspect Dimension
New_Aspects := Empty_List;
List_Of_Dims := New_List;
for Position in Dims_Of_N'First .. System.Count loop
Dim_Power := Dims_Of_N (Position);
Append_To (List_Of_Dims,
Make_Op_Divide (Loc,
Left_Opnd =>
Make_Integer_Literal (Loc, Int (Dim_Power.Numerator)),
Right_Opnd =>
Make_Integer_Literal (Loc, Int (Dim_Power.Denominator))));
end loop;
-- Step 2: Create the new Aspect Specification for Aspect Dimension
New_Aspect :=
Make_Aspect_Specification (Loc,
Identifier => Make_Identifier (Loc, Name_Dimension),
Expression => Make_Aggregate (Loc, Expressions => List_Of_Dims));
-- Step 3: Make a temporary identifier for the new subtype
New_Id := Make_Temporary (Loc, 'T');
Set_Is_Internal (New_Id);
-- Step 4: Declaration of the new subtype
New_Subtyp_Decl_For_L :=
Make_Subtype_Declaration (Loc,
Defining_Identifier => New_Id,
Subtype_Indication => New_Occurrence_Of (Btyp_Of_L, Loc));
Append (New_Aspect, New_Aspects);
Set_Parent (New_Aspects, New_Subtyp_Decl_For_L);
Set_Aspect_Specifications (New_Subtyp_Decl_For_L, New_Aspects);
Analyze (New_Subtyp_Decl_For_L);
-- Case where the operand is dimensionless
else
New_Id := Btyp_Of_L;
end if;
-- Replacement of N by New_N
-- Generate:
-- Actual_1 := Long_Long_Float (L),
-- Actual_2 := Long_Long_Float (Exponent_Value.Numerator) /
-- Long_Long_Float (Exponent_Value.Denominator);
-- (T (Expon_LLF (Actual_1, Actual_2)));
-- where T is the subtype declared in step 1
-- The node is rewritten as a type conversion
-- Step 1: Creation of the two parameters of Expon_LLF function call
Actual_1 :=
Make_Type_Conversion (Loc,
Subtype_Mark => New_Occurrence_Of (Standard_Long_Long_Float, Loc),
Expression => Relocate_Node (L));
Actual_2 :=
Make_Op_Divide (Loc,
Left_Opnd =>
Make_Real_Literal (Loc,
UR_From_Uint (UI_From_Int (Int (Exponent_Value.Numerator)))),
Right_Opnd =>
Make_Real_Literal (Loc,
UR_From_Uint (UI_From_Int (Int (Exponent_Value.Denominator)))));
-- Step 2: Creation of New_N
New_N :=
Make_Type_Conversion (Loc,
Subtype_Mark => New_Occurrence_Of (New_Id, Loc),
Expression =>
Make_Function_Call (Loc,
Name => New_Occurrence_Of (RTE (RE_Expon_LLF), Loc),
Parameter_Associations => New_List (
Actual_1, Actual_2)));
-- Step 3: Rewrite N with the result
Rewrite (N, New_N);
Set_Etype (N, New_Id);
Analyze_And_Resolve (N, New_Id);
end Eval_Op_Expon_With_Rational_Exponent;
------------
-- Exists --
------------
function Exists (Dim : Dimension_Type) return Boolean is
begin
return Dim /= Null_Dimension;
end Exists;
function Exists (Str : String_Id) return Boolean is
begin
return Str /= No_String;
end Exists;
function Exists (Sys : System_Type) return Boolean is
begin
return Sys /= Null_System;
end Exists;
---------------------------------
-- Expand_Put_Call_With_Symbol --
---------------------------------
-- For procedure Put (resp. Put_Dim_Of) and function Image, defined in
-- System.Dim.Float_IO or System.Dim.Integer_IO, the default string
-- parameter is rewritten to include the unit symbol (or the dimension
-- symbols if not a defined quantity) in the output of a dimensioned
-- object. If a value is already supplied by the user for the parameter
-- Symbol, it is used as is.
-- Case 1. Item is dimensionless
-- * Put : Item appears without a suffix
-- * Put_Dim_Of : the output is []
-- Obj : Mks_Type := 2.6;
-- Put (Obj, 1, 1, 0);
-- Put_Dim_Of (Obj);
-- The corresponding outputs are:
-- $2.6
-- $[]
-- Case 2. Item has a dimension
-- * Put : If the type of Item is a dimensioned subtype whose
-- symbol is not empty, then the symbol appears as a
-- suffix. Otherwise, a new string is created and appears
-- as a suffix of Item. This string results in the
-- successive concatenations between each unit symbol
-- raised by its corresponding dimension power from the
-- dimensions of Item.
-- * Put_Dim_Of : The output is a new string resulting in the successive
-- concatenations between each dimension symbol raised by
-- its corresponding dimension power from the dimensions of
-- Item.
-- subtype Random is Mks_Type
-- with
-- Dimension => (
-- Meter => 3,
-- Candela => -1,
-- others => 0);
-- Obj : Random := 5.0;
-- Put (Obj);
-- Put_Dim_Of (Obj);
-- The corresponding outputs are:
-- $5.0 m**3.cd**(-1)
-- $[l**3.J**(-1)]
-- The function Image returns the string identical to that produced by
-- a call to Put whose first parameter is a string.
procedure Expand_Put_Call_With_Symbol (N : Node_Id) is
Actuals : constant List_Id := Parameter_Associations (N);
Loc : constant Source_Ptr := Sloc (N);
Name_Call : constant Node_Id := Name (N);
New_Actuals : constant List_Id := New_List;
Actual : Node_Id;
Dims_Of_Actual : Dimension_Type;
Etyp : Entity_Id;
New_Str_Lit : Node_Id := Empty;
Symbols : String_Id;
Is_Put_Dim_Of : Boolean := False;
-- This flag is used in order to differentiate routines Put and
-- Put_Dim_Of. Set to True if the procedure is one of the Put_Dim_Of
-- defined in System.Dim.Float_IO or System.Dim.Integer_IO.
function Has_Symbols return Boolean;
-- Return True if the current Put call already has a parameter
-- association for parameter "Symbols" with the correct string of
-- symbols.
function Is_Procedure_Put_Call return Boolean;
-- Return True if the current call is a call of an instantiation of a
-- procedure Put defined in the package System.Dim.Float_IO and
-- System.Dim.Integer_IO.
function Item_Actual return Node_Id;
-- Return the item actual parameter node in the output call
-----------------
-- Has_Symbols --
-----------------
function Has_Symbols return Boolean is
Actual : Node_Id;
Actual_Str : Node_Id;
begin
-- Look for a symbols parameter association in the list of actuals
Actual := First (Actuals);
while Present (Actual) loop
-- Positional parameter association case when the actual is a
-- string literal.
if Nkind (Actual) = N_String_Literal then
Actual_Str := Actual;
-- Named parameter association case when selector name is Symbol
elsif Nkind (Actual) = N_Parameter_Association
and then Chars (Selector_Name (Actual)) = Name_Symbol
then
Actual_Str := Explicit_Actual_Parameter (Actual);
-- Ignore all other cases
else
Actual_Str := Empty;
end if;
if Present (Actual_Str) then
-- Return True if the actual comes from source or if the string
-- of symbols doesn't have the default value (i.e. it is ""),
-- in which case it is used as suffix of the generated string.
if Comes_From_Source (Actual)
or else String_Length (Strval (Actual_Str)) /= 0
then
return True;
else
return False;
end if;
end if;
Next (Actual);
end loop;
-- At this point, the call has no parameter association. Look to the
-- last actual since the symbols parameter is the last one.
return Nkind (Last (Actuals)) = N_String_Literal;
end Has_Symbols;
---------------------------
-- Is_Procedure_Put_Call --
---------------------------
function Is_Procedure_Put_Call return Boolean is
Ent : Entity_Id;
Loc : Source_Ptr;
begin
-- There are three different Put (resp. Put_Dim_Of) routines in each
-- generic dim IO package. Verify the current procedure call is one
-- of them.
if Is_Entity_Name (Name_Call) then
Ent := Entity (Name_Call);
-- Get the original subprogram entity following the renaming chain
if Present (Alias (Ent)) then
Ent := Alias (Ent);
end if;
Loc := Sloc (Ent);
-- Check the name of the entity subprogram is Put (resp.
-- Put_Dim_Of) and verify this entity is located in either
-- System.Dim.Float_IO or System.Dim.Integer_IO.
if Loc > No_Location
and then Is_Dim_IO_Package_Entity
(Cunit_Entity (Get_Source_Unit (Loc)))
then
if Chars (Ent) = Name_Put_Dim_Of then
Is_Put_Dim_Of := True;
return True;
elsif Chars (Ent) = Name_Put
or else Chars (Ent) = Name_Image
then
return True;
end if;
end if;
end if;
return False;
end Is_Procedure_Put_Call;
-----------------
-- Item_Actual --
-----------------
function Item_Actual return Node_Id is
Actual : Node_Id;
begin
-- Look for the item actual as a parameter association
Actual := First (Actuals);
while Present (Actual) loop
if Nkind (Actual) = N_Parameter_Association
and then Chars (Selector_Name (Actual)) = Name_Item
then
return Explicit_Actual_Parameter (Actual);
end if;
Next (Actual);
end loop;
-- Case where the item has been defined without an association
Actual := First (Actuals);
-- Depending on the procedure Put, Item actual could be first or
-- second in the list of actuals.
if Has_Dimension_System (Base_Type (Etype (Actual))) then
return Actual;
else
return Next (Actual);
end if;
end Item_Actual;
-- Start of processing for Expand_Put_Call_With_Symbol
begin
if Is_Procedure_Put_Call and then not Has_Symbols then
Actual := Item_Actual;
Dims_Of_Actual := Dimensions_Of (Actual);
Etyp := Etype (Actual);
-- Put_Dim_Of case
if Is_Put_Dim_Of then
-- Check that the item is not dimensionless
-- Create the new String_Literal with the new String_Id generated
-- by the routine From_Dim_To_Str_Of_Dim_Symbols.
if Exists (Dims_Of_Actual) then
New_Str_Lit :=
Make_String_Literal (Loc,
From_Dim_To_Str_Of_Dim_Symbols
(Dims_Of_Actual, System_Of (Base_Type (Etyp))));
-- If dimensionless, the output is []
else
New_Str_Lit :=
Make_String_Literal (Loc, "[]");
end if;
-- Put case
else
-- Add the symbol as a suffix of the value if the subtype has a
-- unit symbol or if the parameter is not dimensionless.
if Exists (Symbol_Of (Etyp)) then
Symbols := Symbol_Of (Etyp);
else
Symbols := From_Dim_To_Str_Of_Unit_Symbols
(Dims_Of_Actual, System_Of (Base_Type (Etyp)));
end if;
-- Check Symbols exists
if Exists (Symbols) then
Start_String;
-- Put a space between the value and the dimension
Store_String_Char (' ');
Store_String_Chars (Symbols);
New_Str_Lit := Make_String_Literal (Loc, End_String);
end if;
end if;
if Present (New_Str_Lit) then
-- Insert all actuals in New_Actuals
Actual := First (Actuals);
while Present (Actual) loop
-- Copy every actuals in New_Actuals except the Symbols
-- parameter association.
if Nkind (Actual) = N_Parameter_Association
and then Chars (Selector_Name (Actual)) /= Name_Symbol
then
Append_To (New_Actuals,
Make_Parameter_Association (Loc,
Selector_Name => New_Copy (Selector_Name (Actual)),
Explicit_Actual_Parameter =>
New_Copy (Explicit_Actual_Parameter (Actual))));
elsif Nkind (Actual) /= N_Parameter_Association then
Append_To (New_Actuals, New_Copy (Actual));
end if;
Next (Actual);
end loop;
-- Create new Symbols param association and append to New_Actuals
Append_To (New_Actuals,
Make_Parameter_Association (Loc,
Selector_Name => Make_Identifier (Loc, Name_Symbol),
Explicit_Actual_Parameter => New_Str_Lit));
-- Rewrite and analyze the procedure call
if Chars (Name_Call) = Name_Image then
Rewrite (N,
Make_Function_Call (Loc,
Name => New_Copy (Name_Call),
Parameter_Associations => New_Actuals));
Analyze_And_Resolve (N);
else
Rewrite (N,
Make_Procedure_Call_Statement (Loc,
Name => New_Copy (Name_Call),
Parameter_Associations => New_Actuals));
Analyze (N);
end if;
end if;
end if;
end Expand_Put_Call_With_Symbol;
------------------------------------
-- From_Dim_To_Str_Of_Dim_Symbols --
------------------------------------
-- Given a dimension vector and the corresponding dimension system, create
-- a String_Id to output dimension symbols corresponding to the dimensions
-- Dims. If In_Error_Msg is True, there is a special handling for character
-- asterisk * which is an insertion character in error messages.
function From_Dim_To_Str_Of_Dim_Symbols
(Dims : Dimension_Type;
System : System_Type;
In_Error_Msg : Boolean := False) return String_Id
is
Dim_Power : Rational;
First_Dim : Boolean := True;
procedure Store_String_Oexpon;
-- Store the expon operator symbol "**" in the string. In error
-- messages, asterisk * is a special character and must be quoted
-- to be placed literally into the message.
-------------------------
-- Store_String_Oexpon --
-------------------------
procedure Store_String_Oexpon is
begin
if In_Error_Msg then
Store_String_Chars ("'*'*");
else
Store_String_Chars ("**");
end if;
end Store_String_Oexpon;
-- Start of processing for From_Dim_To_Str_Of_Dim_Symbols
begin
-- Initialization of the new String_Id
Start_String;
-- Store the dimension symbols inside boxes
if In_Error_Msg then
Store_String_Chars ("'[");
else
Store_String_Char ('[');
end if;
for Position in Dimension_Type'Range loop
Dim_Power := Dims (Position);
if Dim_Power /= Zero then
if First_Dim then
First_Dim := False;
else
Store_String_Char ('.');
end if;
Store_String_Chars (System.Dim_Symbols (Position));
-- Positive dimension case
if Dim_Power.Numerator > 0 then
-- Integer case
if Dim_Power.Denominator = 1 then
if Dim_Power.Numerator /= 1 then
Store_String_Oexpon;
Store_String_Int (Int (Dim_Power.Numerator));
end if;
-- Rational case when denominator /= 1
else
Store_String_Oexpon;
Store_String_Char ('(');
Store_String_Int (Int (Dim_Power.Numerator));
Store_String_Char ('/');
Store_String_Int (Int (Dim_Power.Denominator));
Store_String_Char (')');
end if;
-- Negative dimension case
else
Store_String_Oexpon;
Store_String_Char ('(');
Store_String_Char ('-');
Store_String_Int (Int (-Dim_Power.Numerator));
-- Integer case
if Dim_Power.Denominator = 1 then
Store_String_Char (')');
-- Rational case when denominator /= 1
else
Store_String_Char ('/');
Store_String_Int (Int (Dim_Power.Denominator));
Store_String_Char (')');
end if;
end if;
end if;
end loop;
if In_Error_Msg then
Store_String_Chars ("']");
else
Store_String_Char (']');
end if;
return End_String;
end From_Dim_To_Str_Of_Dim_Symbols;
-------------------------------------
-- From_Dim_To_Str_Of_Unit_Symbols --
-------------------------------------
-- Given a dimension vector and the corresponding dimension system,
-- create a String_Id to output the unit symbols corresponding to the
-- dimensions Dims.
function From_Dim_To_Str_Of_Unit_Symbols
(Dims : Dimension_Type;
System : System_Type) return String_Id
is
Dim_Power : Rational;
First_Dim : Boolean := True;
begin
-- Return No_String if dimensionless
if not Exists (Dims) then
return No_String;
end if;
-- Initialization of the new String_Id
Start_String;
for Position in Dimension_Type'Range loop
Dim_Power := Dims (Position);
if Dim_Power /= Zero then
if First_Dim then
First_Dim := False;
else
Store_String_Char ('.');
end if;
Store_String_Chars (System.Unit_Symbols (Position));
-- Positive dimension case
if Dim_Power.Numerator > 0 then
-- Integer case
if Dim_Power.Denominator = 1 then
if Dim_Power.Numerator /= 1 then
Store_String_Chars ("**");
Store_String_Int (Int (Dim_Power.Numerator));
end if;
-- Rational case when denominator /= 1
else
Store_String_Chars ("**");
Store_String_Char ('(');
Store_String_Int (Int (Dim_Power.Numerator));
Store_String_Char ('/');
Store_String_Int (Int (Dim_Power.Denominator));
Store_String_Char (')');
end if;
-- Negative dimension case
else
Store_String_Chars ("**");
Store_String_Char ('(');
Store_String_Char ('-');
Store_String_Int (Int (-Dim_Power.Numerator));
-- Integer case
if Dim_Power.Denominator = 1 then
Store_String_Char (')');
-- Rational case when denominator /= 1
else
Store_String_Char ('/');
Store_String_Int (Int (Dim_Power.Denominator));
Store_String_Char (')');
end if;
end if;
end if;
end loop;
return End_String;
end From_Dim_To_Str_Of_Unit_Symbols;
---------
-- GCD --
---------
function GCD (Left, Right : Whole) return Int is
L : Whole;
R : Whole;
begin
L := Left;
R := Right;
while R /= 0 loop
L := L mod R;
if L = 0 then
return Int (R);
end if;
R := R mod L;
end loop;
return Int (L);
end GCD;
--------------------------
-- Has_Dimension_System --
--------------------------
function Has_Dimension_System (Typ : Entity_Id) return Boolean is
begin
return Exists (System_Of (Typ));
end Has_Dimension_System;
------------------------------
-- Is_Dim_IO_Package_Entity --
------------------------------
function Is_Dim_IO_Package_Entity (E : Entity_Id) return Boolean is
begin
-- Check the package entity corresponds to System.Dim.Float_IO or
-- System.Dim.Integer_IO.
return
Is_RTU (E, System_Dim_Float_IO)
or else
Is_RTU (E, System_Dim_Integer_IO);
end Is_Dim_IO_Package_Entity;
-------------------------------------
-- Is_Dim_IO_Package_Instantiation --
-------------------------------------
function Is_Dim_IO_Package_Instantiation (N : Node_Id) return Boolean is
Gen_Id : constant Node_Id := Name (N);
begin
-- Check that the instantiated package is either System.Dim.Float_IO
-- or System.Dim.Integer_IO.
return
Is_Entity_Name (Gen_Id)
and then Is_Dim_IO_Package_Entity (Entity (Gen_Id));
end Is_Dim_IO_Package_Instantiation;
----------------
-- Is_Invalid --
----------------
function Is_Invalid (Position : Dimension_Position) return Boolean is
begin
return Position = Invalid_Position;
end Is_Invalid;
---------------------
-- Move_Dimensions --
---------------------
procedure Move_Dimensions (From, To : Node_Id) is
begin
if Ada_Version < Ada_2012 then
return;
end if;
-- Copy the dimension of 'From to 'To' and remove dimension of 'From'
Copy_Dimensions (From, To);
Remove_Dimensions (From);
end Move_Dimensions;
---------------------------------------
-- New_Copy_Tree_And_Copy_Dimensions --
---------------------------------------
function New_Copy_Tree_And_Copy_Dimensions
(Source : Node_Id;
Map : Elist_Id := No_Elist;
New_Sloc : Source_Ptr := No_Location;
New_Scope : Entity_Id := Empty) return Node_Id
is
New_Copy : constant Node_Id :=
New_Copy_Tree (Source, Map, New_Sloc, New_Scope);
begin
-- Move the dimensions of Source to New_Copy
Copy_Dimensions (Source, New_Copy);
return New_Copy;
end New_Copy_Tree_And_Copy_Dimensions;
------------
-- Reduce --
------------
function Reduce (X : Rational) return Rational is
begin
if X.Numerator = 0 then
return Zero;
end if;
declare
G : constant Int := GCD (X.Numerator, X.Denominator);
begin
return Rational'(Numerator => Whole (Int (X.Numerator) / G),
Denominator => Whole (Int (X.Denominator) / G));
end;
end Reduce;
-----------------------
-- Remove_Dimensions --
-----------------------
procedure Remove_Dimensions (N : Node_Id) is
Dims_Of_N : constant Dimension_Type := Dimensions_Of (N);
begin
if Exists (Dims_Of_N) then
Dimension_Table.Remove (N);
end if;
end Remove_Dimensions;
-----------------------------------
-- Remove_Dimension_In_Statement --
-----------------------------------
-- Removal of dimension in statement as part of the Analyze_Statements
-- routine (see package Sem_Ch5).
procedure Remove_Dimension_In_Statement (Stmt : Node_Id) is
begin
if Ada_Version < Ada_2012 then
return;
end if;
-- Remove dimension in parameter specifications for accept statement
if Nkind (Stmt) = N_Accept_Statement then
declare
Param : Node_Id := First (Parameter_Specifications (Stmt));
begin
while Present (Param) loop
Remove_Dimensions (Param);
Next (Param);
end loop;
end;
-- Remove dimension of name and expression in assignments
elsif Nkind (Stmt) = N_Assignment_Statement then
Remove_Dimensions (Expression (Stmt));
Remove_Dimensions (Name (Stmt));
end if;
end Remove_Dimension_In_Statement;
--------------------
-- Set_Dimensions --
--------------------
procedure Set_Dimensions (N : Node_Id; Val : Dimension_Type) is
begin
pragma Assert (OK_For_Dimension (Nkind (N)));
pragma Assert (Exists (Val));
Dimension_Table.Set (N, Val);
end Set_Dimensions;
----------------
-- Set_Symbol --
----------------
procedure Set_Symbol (E : Entity_Id; Val : String_Id) is
begin
Symbol_Table.Set (E, Val);
end Set_Symbol;
---------------
-- Symbol_Of --
---------------
function Symbol_Of (E : Entity_Id) return String_Id is
Subtype_Symbol : constant String_Id := Symbol_Table.Get (E);
begin
if Subtype_Symbol /= No_String then
return Subtype_Symbol;
else
return From_Dim_To_Str_Of_Unit_Symbols
(Dimensions_Of (E), System_Of (Base_Type (E)));
end if;
end Symbol_Of;
-----------------------
-- Symbol_Table_Hash --
-----------------------
function Symbol_Table_Hash (Key : Entity_Id) return Symbol_Table_Range is
begin
return Symbol_Table_Range (Key mod 511);
end Symbol_Table_Hash;
---------------
-- System_Of --
---------------
function System_Of (E : Entity_Id) return System_Type is
begin
if Present (E) then
declare
Type_Decl : constant Node_Id := Parent (E);
begin
-- Look for Type_Decl in System_Table
for Dim_Sys in 1 .. System_Table.Last loop
if Type_Decl = System_Table.Table (Dim_Sys).Type_Decl then
return System_Table.Table (Dim_Sys);
end if;
end loop;
end;
end if;
return Null_System;
end System_Of;
end Sem_Dim;