;; Copyright (C) 2002-2022 Free Software Foundation, Inc. ;; ;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version. ;; ;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/. ;; ;; ......................... ;; ;; DFA-based pipeline description for Sandcraft SR3 (MIPS64 based) ;; ;; The SR3 is described as: ;; - nine-stage pipeline, insn buffering with out-of-order issue to ;; multiple function units, with an average dispatch rate of 2 ;; insn.s per cycle (max 6 insns: 2 fpu, 4 cpu). ;; ;; The details on this are scant except for a diagram in ;; Chap. 6 of Rev. 1.0 SR3 Spec. ;; ;; The model employed below is designed to closely approximate the ;; published latencies. Emulation of out-of-order issue and the insn ;; buffering is done via a VLIW dispatch style (with a packing of 6 insns); ;; the function unit reservations restrictions (define_*_set) are ;; contrived to support published timings. ;; ;; Reference: ;; “SR3 Microprocessor Specification, System development information,” ;; Revision 1.0, 13 December 2000. ;; ;; ;; Reservation model is based on: ;; 1) Figure 6-1, from the 1.0 specification. ;; 2) Chapter 19, from the 1.0 specification. ;; 3) following questions(Red Hat)/answers(Sandcraft): ;; RH> From Section 19.1 ;; RH> 1) In terms of figure 6-1, are all the instructions in ;; RH> table 19-1 restricted ;; RH> to ALUx? When ALUx is not in use for an instruction in table;; RH> 19-1 is ;; RH> it fully compatible with all insns that issue to ALUy? ;; ;; Yes, all the instructions in Table 19-1 only go to ALUX, and all the ;; instructions that can be issued to ALUY can also be issued to ALUX. ;; ;; ;; RH> From Section 19.2 ;; RH> 2) Explain conditional moves execution path (in terms of ;; RH> figure 6-1) ;; ;; Conditional move of integer registers (based on floating point condition ;; codes or integer register value) go to ALUX or ALUY. ;; ;; RH> 3) Explain floating point store execution path (in terms of ;; RH> figure 6-1) ;; ;; Floating point stores go to Ld/St and go to MOV in the floating point ;; pipeline. ;; ;; Floating point loads go to Ld/St and go to LOAD in the floating point ;; pipeline. ;; ;; RH> 4) Explain branch on floating condition (in terms of figure 6-1);; ;; Branch on floating condition go to BRU. ;; ;; RH> 5) Is the column for single RECIP instruction latency correct? ;; RH> What about for RSQRT single and double? ;; ;; The latency/repeat for RECIP and RSQRT are correct. ;;
;; ;; Use four automata to isolate long latency operations, and to ;; reduce the complexity of cpu+fpu, reducing space. ;; (define_automaton “sr71_cpu, sr71_cpu1, sr71_cp1, sr71_cp2, sr71_fextra, sr71_imacc”)
;; feeders for CPU function units and feeders for fpu (CP1 interface) (define_cpu_unit “sr_iss0,sr_iss1,sr_iss2,sr_iss3,sr_iss4,sr_iss5” “sr71_cpu”)
;; CPU function units (define_cpu_unit “ipu_bru” “sr71_cpu1”) (define_cpu_unit “ipu_alux” “sr71_cpu1”) (define_cpu_unit “ipu_aluy” “sr71_cpu1”) (define_cpu_unit “ipu_ldst” “sr71_cpu1”) (define_cpu_unit “ipu_macc_iter” “sr71_imacc”)
;; Floating-point unit (Co-processor interface 1). (define_cpu_unit “fpu_mov” “sr71_cp1”) (define_cpu_unit “fpu_load” “sr71_cp1”) (define_cpu_unit “fpu_fpu” “sr71_cp2”)
;; fictitous unit to track long float insns with separate automaton (define_cpu_unit “fpu_iter” “sr71_fextra”)
;; ;; Define common execution path (reservation) combinations ;;
;; (define_reservation “cpu_iss” “sr_iss0|sr_iss1|sr_iss2|sr_iss3”)
;; two cycles are used for instruction using the fpu as it runs ;; at half the clock speed of the cpu. By adding an extra cycle ;; to the issue units, the default/minimum “repeat” dispatch delay is ;; accounted for all insn.s (define_reservation “cp1_iss” “(sr_iss42)|(sr_iss52)”)
(define_reservation “serial_dispatch” “sr_iss0+sr_iss1+sr_iss2+sr_iss3+sr_iss4+sr_iss5”)
;; Simulate a 6 insn VLIW dispatch, 1 cycle in dispatch followed by ;; reservation of function unit. (define_reservation “ri_insns” “cpu_iss,(ipu_alux|ipu_aluy)”) (define_reservation “ri_mem” “cpu_iss,ipu_ldst”) (define_reservation “ri_alux” “cpu_iss,ipu_alux”) (define_reservation “ri_branch” “cpu_iss,ipu_bru”)
(define_reservation “rf_insn” “cp1_iss,fpu_fpu”) (define_reservation “rf_ldmem” “cp1_iss,fpu_load”)
; simultaneous reservation of pseudo-unit keeps cp1 fpu tied ; up until long cycle insn is finished... (define_reservation “rf_multi1” “rf_insn+fpu_iter”)
;; ;; The ordering of the instruction-execution-path/resource-usage ;; descriptions (also known as reservation RTL) is roughly ordered ;; based on the define attribute RTL for the “type” classification. ;; When modifying, remember that the first test that matches is the ;; reservation used! ;;
(define_insn_reservation “ir_sr70_unknown” 1 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “unknown,atomic,syncloop”)) “serial_dispatch”)
;; Assume prediction fails. (define_insn_reservation “ir_sr70_branch” 6 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “branch,jump,call”)) “ri_branch”)
(define_insn_reservation “ir_sr70_load” 2 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “load”)) “ri_mem”)
(define_insn_reservation “ir_sr70_store” 1 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “store”)) “ri_mem”)
;; ;; float loads/stores flow through both cpu and cp1... ;; (define_insn_reservation “ir_sr70_fload” 9 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “fpload,fpidxload”)) “(cpu_iss+cp1_iss),(ri_mem+rf_ldmem)”)
(define_insn_reservation “ir_sr70_fstore” 1 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “fpstore,fpidxstore”)) “(cpu_iss+cp1_iss),(fpu_mov+ri_mem)”)
;; This reservation is for conditional move based on integer ;; or floating point CC. (define_insn_reservation “ir_sr70_condmove” 4 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “condmove”)) “ri_insns”)
;; Try to discriminate move-from-cp1 versus move-to-cp1 as latencies ;; are different. Like float load/store, these insns use multiple ;; resources simultaneously (define_insn_reservation “ir_sr70_xfer_from” 6 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “mfc”)) “(cpu_iss+cp1_iss),(fpu_mov+ri_mem)”)
(define_insn_reservation “ir_sr70_xfer_to” 9 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “mtc”)) “(cpu_iss+cp1_iss),(ri_mem+rf_ldmem)”)
(define_insn_reservation “ir_sr70_hilo” 1 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “mthi,mtlo,mfhi,mflo”)) “ri_insns”)
(define_insn_reservation “ir_sr70_arith” 1 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “arith,shift,signext,slt,clz,const,logical,move,trap”)) “ri_insns”)
;; emulate repeat (dispatch stall) by spending extra cycle(s) in ;; in iter unit (define_insn_reservation “ir_sr70_imul_si” 4 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “imul,imul3,imadd”) (eq_attr “mode” “SI”))) “ri_alux,ipu_alux,ipu_macc_iter”)
(define_insn_reservation “ir_sr70_imul_di” 6 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “imul,imul3,imadd”) (eq_attr “mode” “DI”))) “ri_alux,ipu_alux,(ipu_macc_iter*3)”)
;; Divide algorithm is early out with best latency of 7 pcycles. ;; Use worst case for scheduling purposes. (define_insn_reservation “ir_sr70_idiv_si” 41 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “idiv”) (eq_attr “mode” “SI”))) “ri_alux,ipu_alux,(ipu_macc_iter*38)”)
(define_insn_reservation “ir_sr70_idiv_di” 73 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “idiv”) (eq_attr “mode” “DI”))) “ri_alux,ipu_alux,(ipu_macc_iter*70)”)
;; extra reservations of fpu_fpu are for repeat latency (define_insn_reservation “ir_sr70_fadd_sf” 8 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “fadd”) (eq_attr “mode” “SF”))) “rf_insn,fpu_fpu”)
(define_insn_reservation “ir_sr70_fadd_df” 10 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “fadd”) (eq_attr “mode” “DF”))) “rf_insn,fpu_fpu”)
;; Latencies for MADD,MSUB, NMADD, NMSUB assume the Multiply is fused ;; with the sub or add. (define_insn_reservation “ir_sr70_fmul_sf” 8 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “fmul,fmadd”) (eq_attr “mode” “SF”))) “rf_insn,fpu_fpu”)
;; tie up the fpu unit to emulate the balance for the “repeat ;; rate” of 8 (2 are spent in the iss unit) (define_insn_reservation “ir_sr70_fmul_df” 16 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “fmul,fmadd”) (eq_attr “mode” “DF”))) “rf_insn,fpu_fpu*6”)
;; RECIP insn uses same type attr as div, and for SR3, has same ;; timings for double. However, single RECIP has a latency of ;; 28 -- only way to fix this is to introduce new insn attrs. ;; cycles spent in iter unit are designed to satisfy balance ;; of “repeat” latency after insn uses up rf_multi1 reservation (define_insn_reservation “ir_sr70_fdiv_sf” 60 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “fdiv,frdiv”) (eq_attr “mode” “SF”))) “rf_multi1+(fpu_iter*51)”)
(define_insn_reservation “ir_sr70_fdiv_df” 120 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “fdiv,frdiv”) (eq_attr “mode” “DF”))) “rf_multi1+(fpu_iter*109)”)
(define_insn_reservation “ir_sr70_fabs” 4 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “fabs,fneg,fmove”)) “rf_insn,fpu_fpu”)
(define_insn_reservation “ir_sr70_fcmp” 10 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “fcmp”)) “rf_insn,fpu_fpu”)
;; “fcvt” type attribute covers a number of diff insns, most have the same ;; latency descriptions, a few vary. We use the ;; most common timing (which is also worst case). (define_insn_reservation “ir_sr70_fcvt” 12 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “fcvt”)) “rf_insn,fpu_fpu*4”)
(define_insn_reservation “ir_sr70_fsqrt_sf” 62 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “fsqrt”) (eq_attr “mode” “SF”))) “rf_multi1+(fpu_iter*53)”)
(define_insn_reservation “ir_sr70_fsqrt_df” 122 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “fsqrt”) (eq_attr “mode” “DF”))) “rf_multi1+(fpu_iter*111)”)
(define_insn_reservation “ir_sr70_frsqrt_sf” 48 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “frsqrt”) (eq_attr “mode” “SF”))) “rf_multi1+(fpu_iter*39)”)
(define_insn_reservation “ir_sr70_frsqrt_df” 240 (and (eq_attr “cpu” “sr71000”) (and (eq_attr “type” “frsqrt”) (eq_attr “mode” “DF”))) “rf_multi1+(fpu_iter*229)”)
(define_insn_reservation “ir_sr70_multi” 1 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “multi”)) “serial_dispatch”)
(define_insn_reservation “ir_sr70_nop” 1 (and (eq_attr “cpu” “sr71000”) (eq_attr “type” “nop”)) “ri_insns”)