| /* Dwarf2 Call Frame Information helper routines. |
| Copyright (C) 1992-2022 Free Software Foundation, Inc. |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it under |
| the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 3, or (at your option) any later |
| version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #include "config.h" |
| #include "system.h" |
| #include "coretypes.h" |
| #include "target.h" |
| #include "function.h" |
| #include "rtl.h" |
| #include "tree.h" |
| #include "tree-pass.h" |
| #include "memmodel.h" |
| #include "tm_p.h" |
| #include "emit-rtl.h" |
| #include "stor-layout.h" |
| #include "cfgbuild.h" |
| #include "dwarf2out.h" |
| #include "dwarf2asm.h" |
| #include "common/common-target.h" |
| |
| #include "except.h" /* expand_builtin_dwarf_sp_column */ |
| #include "profile-count.h" /* For expr.h */ |
| #include "expr.h" /* init_return_column_size */ |
| #include "output.h" /* asm_out_file */ |
| #include "debug.h" /* dwarf2out_do_frame, dwarf2out_do_cfi_asm */ |
| #include "flags.h" /* dwarf_debuginfo_p */ |
| |
| /* ??? Poison these here until it can be done generically. They've been |
| totally replaced in this file; make sure it stays that way. */ |
| #undef DWARF2_UNWIND_INFO |
| #undef DWARF2_FRAME_INFO |
| #if (GCC_VERSION >= 3000) |
| #pragma GCC poison DWARF2_UNWIND_INFO DWARF2_FRAME_INFO |
| #endif |
| |
| #ifndef INCOMING_RETURN_ADDR_RTX |
| #define INCOMING_RETURN_ADDR_RTX (gcc_unreachable (), NULL_RTX) |
| #endif |
| |
| #ifndef DEFAULT_INCOMING_FRAME_SP_OFFSET |
| #define DEFAULT_INCOMING_FRAME_SP_OFFSET INCOMING_FRAME_SP_OFFSET |
| #endif |
| |
| /* A collected description of an entire row of the abstract CFI table. */ |
| struct GTY(()) dw_cfi_row |
| { |
| /* The expression that computes the CFA, expressed in two different ways. |
| The CFA member for the simple cases, and the full CFI expression for |
| the complex cases. The later will be a DW_CFA_cfa_expression. */ |
| dw_cfa_location cfa; |
| dw_cfi_ref cfa_cfi; |
| |
| /* The expressions for any register column that is saved. */ |
| cfi_vec reg_save; |
| |
| /* True if the register window is saved. */ |
| bool window_save; |
| |
| /* True if the return address is in a mangled state. */ |
| bool ra_mangled; |
| }; |
| |
| /* The caller's ORIG_REG is saved in SAVED_IN_REG. */ |
| struct GTY(()) reg_saved_in_data { |
| rtx orig_reg; |
| rtx saved_in_reg; |
| }; |
| |
| |
| /* Since we no longer have a proper CFG, we're going to create a facsimile |
| of one on the fly while processing the frame-related insns. |
| |
| We create dw_trace_info structures for each extended basic block beginning |
| and ending at a "save point". Save points are labels, barriers, certain |
| notes, and of course the beginning and end of the function. |
| |
| As we encounter control transfer insns, we propagate the "current" |
| row state across the edges to the starts of traces. When checking is |
| enabled, we validate that we propagate the same data from all sources. |
| |
| All traces are members of the TRACE_INFO array, in the order in which |
| they appear in the instruction stream. |
| |
| All save points are present in the TRACE_INDEX hash, mapping the insn |
| starting a trace to the dw_trace_info describing the trace. */ |
| |
| struct dw_trace_info |
| { |
| /* The insn that begins the trace. */ |
| rtx_insn *head; |
| |
| /* The row state at the beginning and end of the trace. */ |
| dw_cfi_row *beg_row, *end_row; |
| |
| /* Tracking for DW_CFA_GNU_args_size. The "true" sizes are those we find |
| while scanning insns. However, the args_size value is irrelevant at |
| any point except can_throw_internal_p insns. Therefore the "delay" |
| sizes the values that must actually be emitted for this trace. */ |
| poly_int64_pod beg_true_args_size, end_true_args_size; |
| poly_int64_pod beg_delay_args_size, end_delay_args_size; |
| |
| /* The first EH insn in the trace, where beg_delay_args_size must be set. */ |
| rtx_insn *eh_head; |
| |
| /* The following variables contain data used in interpreting frame related |
| expressions. These are not part of the "real" row state as defined by |
| Dwarf, but it seems like they need to be propagated into a trace in case |
| frame related expressions have been sunk. */ |
| /* ??? This seems fragile. These variables are fragments of a larger |
| expression. If we do not keep the entire expression together, we risk |
| not being able to put it together properly. Consider forcing targets |
| to generate self-contained expressions and dropping all of the magic |
| interpretation code in this file. Or at least refusing to shrink wrap |
| any frame related insn that doesn't contain a complete expression. */ |
| |
| /* The register used for saving registers to the stack, and its offset |
| from the CFA. */ |
| dw_cfa_location cfa_store; |
| |
| /* A temporary register holding an integral value used in adjusting SP |
| or setting up the store_reg. The "offset" field holds the integer |
| value, not an offset. */ |
| dw_cfa_location cfa_temp; |
| |
| /* A set of registers saved in other registers. This is the inverse of |
| the row->reg_save info, if the entry is a DW_CFA_register. This is |
| implemented as a flat array because it normally contains zero or 1 |
| entry, depending on the target. IA-64 is the big spender here, using |
| a maximum of 5 entries. */ |
| vec<reg_saved_in_data> regs_saved_in_regs; |
| |
| /* An identifier for this trace. Used only for debugging dumps. */ |
| unsigned id; |
| |
| /* True if this trace immediately follows NOTE_INSN_SWITCH_TEXT_SECTIONS. */ |
| bool switch_sections; |
| |
| /* True if we've seen different values incoming to beg_true_args_size. */ |
| bool args_size_undefined; |
| |
| /* True if we've seen an insn with a REG_ARGS_SIZE note before EH_HEAD. */ |
| bool args_size_defined_for_eh; |
| }; |
| |
| |
| /* Hashtable helpers. */ |
| |
| struct trace_info_hasher : nofree_ptr_hash <dw_trace_info> |
| { |
| static inline hashval_t hash (const dw_trace_info *); |
| static inline bool equal (const dw_trace_info *, const dw_trace_info *); |
| }; |
| |
| inline hashval_t |
| trace_info_hasher::hash (const dw_trace_info *ti) |
| { |
| return INSN_UID (ti->head); |
| } |
| |
| inline bool |
| trace_info_hasher::equal (const dw_trace_info *a, const dw_trace_info *b) |
| { |
| return a->head == b->head; |
| } |
| |
| |
| /* The variables making up the pseudo-cfg, as described above. */ |
| static vec<dw_trace_info> trace_info; |
| static vec<dw_trace_info *> trace_work_list; |
| static hash_table<trace_info_hasher> *trace_index; |
| |
| /* A vector of call frame insns for the CIE. */ |
| cfi_vec cie_cfi_vec; |
| |
| /* The state of the first row of the FDE table, which includes the |
| state provided by the CIE. */ |
| static GTY(()) dw_cfi_row *cie_cfi_row; |
| |
| static GTY(()) reg_saved_in_data *cie_return_save; |
| |
| static GTY(()) unsigned long dwarf2out_cfi_label_num; |
| |
| /* The insn after which a new CFI note should be emitted. */ |
| static rtx_insn *add_cfi_insn; |
| |
| /* When non-null, add_cfi will add the CFI to this vector. */ |
| static cfi_vec *add_cfi_vec; |
| |
| /* The current instruction trace. */ |
| static dw_trace_info *cur_trace; |
| |
| /* The current, i.e. most recently generated, row of the CFI table. */ |
| static dw_cfi_row *cur_row; |
| |
| /* A copy of the current CFA, for use during the processing of a |
| single insn. */ |
| static dw_cfa_location *cur_cfa; |
| |
| /* We delay emitting a register save until either (a) we reach the end |
| of the prologue or (b) the register is clobbered. This clusters |
| register saves so that there are fewer pc advances. */ |
| |
| struct queued_reg_save { |
| rtx reg; |
| rtx saved_reg; |
| poly_int64_pod cfa_offset; |
| }; |
| |
| |
| static vec<queued_reg_save> queued_reg_saves; |
| |
| /* True if any CFI directives were emitted at the current insn. */ |
| static bool any_cfis_emitted; |
| |
| /* Short-hand for commonly used register numbers. */ |
| static struct cfa_reg dw_stack_pointer_regnum; |
| static struct cfa_reg dw_frame_pointer_regnum; |
| |
| /* Hook used by __throw. */ |
| |
| rtx |
| expand_builtin_dwarf_sp_column (void) |
| { |
| unsigned int dwarf_regnum = DWARF_FRAME_REGNUM (STACK_POINTER_REGNUM); |
| return GEN_INT (DWARF2_FRAME_REG_OUT (dwarf_regnum, 1)); |
| } |
| |
| /* MEM is a memory reference for the register size table, each element of |
| which has mode MODE. Initialize column C as a return address column. */ |
| |
| static void |
| init_return_column_size (scalar_int_mode mode, rtx mem, unsigned int c) |
| { |
| HOST_WIDE_INT offset = c * GET_MODE_SIZE (mode); |
| HOST_WIDE_INT size = GET_MODE_SIZE (Pmode); |
| emit_move_insn (adjust_address (mem, mode, offset), |
| gen_int_mode (size, mode)); |
| } |
| |
| /* Datastructure used by expand_builtin_init_dwarf_reg_sizes and |
| init_one_dwarf_reg_size to communicate on what has been done by the |
| latter. */ |
| |
| struct init_one_dwarf_reg_state |
| { |
| /* Whether the dwarf return column was initialized. */ |
| bool wrote_return_column; |
| |
| /* For each hard register REGNO, whether init_one_dwarf_reg_size |
| was given REGNO to process already. */ |
| bool processed_regno [FIRST_PSEUDO_REGISTER]; |
| |
| }; |
| |
| /* Helper for expand_builtin_init_dwarf_reg_sizes. Generate code to |
| initialize the dwarf register size table entry corresponding to register |
| REGNO in REGMODE. TABLE is the table base address, SLOTMODE is the mode to |
| use for the size entry to initialize, and INIT_STATE is the communication |
| datastructure conveying what we're doing to our caller. */ |
| |
| static |
| void init_one_dwarf_reg_size (int regno, machine_mode regmode, |
| rtx table, machine_mode slotmode, |
| init_one_dwarf_reg_state *init_state) |
| { |
| const unsigned int dnum = DWARF_FRAME_REGNUM (regno); |
| const unsigned int rnum = DWARF2_FRAME_REG_OUT (dnum, 1); |
| const unsigned int dcol = DWARF_REG_TO_UNWIND_COLUMN (rnum); |
| |
| poly_int64 slotoffset = dcol * GET_MODE_SIZE (slotmode); |
| poly_int64 regsize = GET_MODE_SIZE (regmode); |
| |
| init_state->processed_regno[regno] = true; |
| |
| if (rnum >= DWARF_FRAME_REGISTERS) |
| return; |
| |
| if (dnum == DWARF_FRAME_RETURN_COLUMN) |
| { |
| if (regmode == VOIDmode) |
| return; |
| init_state->wrote_return_column = true; |
| } |
| |
| /* ??? When is this true? Should it be a test based on DCOL instead? */ |
| if (maybe_lt (slotoffset, 0)) |
| return; |
| |
| emit_move_insn (adjust_address (table, slotmode, slotoffset), |
| gen_int_mode (regsize, slotmode)); |
| } |
| |
| /* Generate code to initialize the dwarf register size table located |
| at the provided ADDRESS. */ |
| |
| void |
| expand_builtin_init_dwarf_reg_sizes (tree address) |
| { |
| unsigned int i; |
| scalar_int_mode mode = SCALAR_INT_TYPE_MODE (char_type_node); |
| rtx addr = expand_normal (address); |
| rtx mem = gen_rtx_MEM (BLKmode, addr); |
| |
| init_one_dwarf_reg_state init_state; |
| |
| memset ((char *)&init_state, 0, sizeof (init_state)); |
| |
| for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) |
| { |
| machine_mode save_mode; |
| rtx span; |
| |
| /* No point in processing a register multiple times. This could happen |
| with register spans, e.g. when a reg is first processed as a piece of |
| a span, then as a register on its own later on. */ |
| |
| if (init_state.processed_regno[i]) |
| continue; |
| |
| save_mode = targetm.dwarf_frame_reg_mode (i); |
| span = targetm.dwarf_register_span (gen_rtx_REG (save_mode, i)); |
| |
| if (!span) |
| init_one_dwarf_reg_size (i, save_mode, mem, mode, &init_state); |
| else |
| { |
| for (int si = 0; si < XVECLEN (span, 0); si++) |
| { |
| rtx reg = XVECEXP (span, 0, si); |
| |
| init_one_dwarf_reg_size |
| (REGNO (reg), GET_MODE (reg), mem, mode, &init_state); |
| } |
| } |
| } |
| |
| if (!init_state.wrote_return_column) |
| init_return_column_size (mode, mem, DWARF_FRAME_RETURN_COLUMN); |
| |
| #ifdef DWARF_ALT_FRAME_RETURN_COLUMN |
| init_return_column_size (mode, mem, DWARF_ALT_FRAME_RETURN_COLUMN); |
| #endif |
| |
| targetm.init_dwarf_reg_sizes_extra (address); |
| } |
| |
| |
| static dw_trace_info * |
| get_trace_info (rtx_insn *insn) |
| { |
| dw_trace_info dummy; |
| dummy.head = insn; |
| return trace_index->find_with_hash (&dummy, INSN_UID (insn)); |
| } |
| |
| static bool |
| save_point_p (rtx_insn *insn) |
| { |
| /* Labels, except those that are really jump tables. */ |
| if (LABEL_P (insn)) |
| return inside_basic_block_p (insn); |
| |
| /* We split traces at the prologue/epilogue notes because those |
| are points at which the unwind info is usually stable. This |
| makes it easier to find spots with identical unwind info so |
| that we can use remember/restore_state opcodes. */ |
| if (NOTE_P (insn)) |
| switch (NOTE_KIND (insn)) |
| { |
| case NOTE_INSN_PROLOGUE_END: |
| case NOTE_INSN_EPILOGUE_BEG: |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* Divide OFF by DWARF_CIE_DATA_ALIGNMENT, asserting no remainder. */ |
| |
| static inline HOST_WIDE_INT |
| div_data_align (HOST_WIDE_INT off) |
| { |
| HOST_WIDE_INT r = off / DWARF_CIE_DATA_ALIGNMENT; |
| gcc_assert (r * DWARF_CIE_DATA_ALIGNMENT == off); |
| return r; |
| } |
| |
| /* Return true if we need a signed version of a given opcode |
| (e.g. DW_CFA_offset_extended_sf vs DW_CFA_offset_extended). */ |
| |
| static inline bool |
| need_data_align_sf_opcode (HOST_WIDE_INT off) |
| { |
| return DWARF_CIE_DATA_ALIGNMENT < 0 ? off > 0 : off < 0; |
| } |
| |
| /* Return a pointer to a newly allocated Call Frame Instruction. */ |
| |
| static inline dw_cfi_ref |
| new_cfi (void) |
| { |
| dw_cfi_ref cfi = ggc_alloc<dw_cfi_node> (); |
| |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = 0; |
| cfi->dw_cfi_oprnd2.dw_cfi_reg_num = 0; |
| |
| return cfi; |
| } |
| |
| /* Return a newly allocated CFI row, with no defined data. */ |
| |
| static dw_cfi_row * |
| new_cfi_row (void) |
| { |
| dw_cfi_row *row = ggc_cleared_alloc<dw_cfi_row> (); |
| |
| row->cfa.reg.set_by_dwreg (INVALID_REGNUM); |
| |
| return row; |
| } |
| |
| /* Return a copy of an existing CFI row. */ |
| |
| static dw_cfi_row * |
| copy_cfi_row (dw_cfi_row *src) |
| { |
| dw_cfi_row *dst = ggc_alloc<dw_cfi_row> (); |
| |
| *dst = *src; |
| dst->reg_save = vec_safe_copy (src->reg_save); |
| |
| return dst; |
| } |
| |
| /* Return a copy of an existing CFA location. */ |
| |
| static dw_cfa_location * |
| copy_cfa (dw_cfa_location *src) |
| { |
| dw_cfa_location *dst = ggc_alloc<dw_cfa_location> (); |
| *dst = *src; |
| return dst; |
| } |
| |
| /* Generate a new label for the CFI info to refer to. */ |
| |
| static char * |
| dwarf2out_cfi_label (void) |
| { |
| int num = dwarf2out_cfi_label_num++; |
| char label[20]; |
| |
| ASM_GENERATE_INTERNAL_LABEL (label, "LCFI", num); |
| |
| return xstrdup (label); |
| } |
| |
| /* Add CFI either to the current insn stream or to a vector, or both. */ |
| |
| static void |
| add_cfi (dw_cfi_ref cfi) |
| { |
| any_cfis_emitted = true; |
| |
| if (add_cfi_insn != NULL) |
| { |
| add_cfi_insn = emit_note_after (NOTE_INSN_CFI, add_cfi_insn); |
| NOTE_CFI (add_cfi_insn) = cfi; |
| } |
| |
| if (add_cfi_vec != NULL) |
| vec_safe_push (*add_cfi_vec, cfi); |
| } |
| |
| static void |
| add_cfi_args_size (poly_int64 size) |
| { |
| /* We don't yet have a representation for polynomial sizes. */ |
| HOST_WIDE_INT const_size = size.to_constant (); |
| |
| dw_cfi_ref cfi = new_cfi (); |
| |
| /* While we can occasionally have args_size < 0 internally, this state |
| should not persist at a point we actually need an opcode. */ |
| gcc_assert (const_size >= 0); |
| |
| cfi->dw_cfi_opc = DW_CFA_GNU_args_size; |
| cfi->dw_cfi_oprnd1.dw_cfi_offset = const_size; |
| |
| add_cfi (cfi); |
| } |
| |
| static void |
| add_cfi_restore (unsigned reg) |
| { |
| dw_cfi_ref cfi = new_cfi (); |
| |
| cfi->dw_cfi_opc = (reg & ~0x3f ? DW_CFA_restore_extended : DW_CFA_restore); |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = reg; |
| |
| add_cfi (cfi); |
| } |
| |
| /* Perform ROW->REG_SAVE[COLUMN] = CFI. CFI may be null, indicating |
| that the register column is no longer saved. */ |
| |
| static void |
| update_row_reg_save (dw_cfi_row *row, unsigned column, dw_cfi_ref cfi) |
| { |
| if (vec_safe_length (row->reg_save) <= column) |
| vec_safe_grow_cleared (row->reg_save, column + 1, true); |
| (*row->reg_save)[column] = cfi; |
| } |
| |
| /* This function fills in aa dw_cfa_location structure from a dwarf location |
| descriptor sequence. */ |
| |
| static void |
| get_cfa_from_loc_descr (dw_cfa_location *cfa, struct dw_loc_descr_node *loc) |
| { |
| struct dw_loc_descr_node *ptr; |
| cfa->offset = 0; |
| cfa->base_offset = 0; |
| cfa->indirect = 0; |
| cfa->reg.set_by_dwreg (INVALID_REGNUM); |
| |
| for (ptr = loc; ptr != NULL; ptr = ptr->dw_loc_next) |
| { |
| enum dwarf_location_atom op = ptr->dw_loc_opc; |
| |
| switch (op) |
| { |
| case DW_OP_reg0: |
| case DW_OP_reg1: |
| case DW_OP_reg2: |
| case DW_OP_reg3: |
| case DW_OP_reg4: |
| case DW_OP_reg5: |
| case DW_OP_reg6: |
| case DW_OP_reg7: |
| case DW_OP_reg8: |
| case DW_OP_reg9: |
| case DW_OP_reg10: |
| case DW_OP_reg11: |
| case DW_OP_reg12: |
| case DW_OP_reg13: |
| case DW_OP_reg14: |
| case DW_OP_reg15: |
| case DW_OP_reg16: |
| case DW_OP_reg17: |
| case DW_OP_reg18: |
| case DW_OP_reg19: |
| case DW_OP_reg20: |
| case DW_OP_reg21: |
| case DW_OP_reg22: |
| case DW_OP_reg23: |
| case DW_OP_reg24: |
| case DW_OP_reg25: |
| case DW_OP_reg26: |
| case DW_OP_reg27: |
| case DW_OP_reg28: |
| case DW_OP_reg29: |
| case DW_OP_reg30: |
| case DW_OP_reg31: |
| cfa->reg.set_by_dwreg (op - DW_OP_reg0); |
| break; |
| case DW_OP_regx: |
| cfa->reg.set_by_dwreg (ptr->dw_loc_oprnd1.v.val_int); |
| break; |
| case DW_OP_breg0: |
| case DW_OP_breg1: |
| case DW_OP_breg2: |
| case DW_OP_breg3: |
| case DW_OP_breg4: |
| case DW_OP_breg5: |
| case DW_OP_breg6: |
| case DW_OP_breg7: |
| case DW_OP_breg8: |
| case DW_OP_breg9: |
| case DW_OP_breg10: |
| case DW_OP_breg11: |
| case DW_OP_breg12: |
| case DW_OP_breg13: |
| case DW_OP_breg14: |
| case DW_OP_breg15: |
| case DW_OP_breg16: |
| case DW_OP_breg17: |
| case DW_OP_breg18: |
| case DW_OP_breg19: |
| case DW_OP_breg20: |
| case DW_OP_breg21: |
| case DW_OP_breg22: |
| case DW_OP_breg23: |
| case DW_OP_breg24: |
| case DW_OP_breg25: |
| case DW_OP_breg26: |
| case DW_OP_breg27: |
| case DW_OP_breg28: |
| case DW_OP_breg29: |
| case DW_OP_breg30: |
| case DW_OP_breg31: |
| case DW_OP_bregx: |
| if (cfa->reg.reg == INVALID_REGNUM) |
| { |
| unsigned regno |
| = (op == DW_OP_bregx |
| ? ptr->dw_loc_oprnd1.v.val_int : op - DW_OP_breg0); |
| cfa->reg.set_by_dwreg (regno); |
| cfa->base_offset = ptr->dw_loc_oprnd1.v.val_int; |
| } |
| else |
| { |
| /* Handle case when span can cover multiple registers. We |
| only support the simple case of consecutive registers |
| all with the same size. DWARF that we are dealing with |
| will look something like: |
| <DW_OP_bregx: (r49) 0; DW_OP_const1u: 32; DW_OP_shl; |
| DW_OP_bregx: (r48) 0; DW_OP_plus> */ |
| |
| unsigned regno |
| = (op == DW_OP_bregx |
| ? ptr->dw_loc_oprnd1.v.val_int : op - DW_OP_breg0); |
| gcc_assert (regno == cfa->reg.reg - 1); |
| cfa->reg.span++; |
| /* From all the consecutive registers used, we want to set |
| cfa->reg.reg to lower number register. */ |
| cfa->reg.reg = regno; |
| /* The offset was the shift value. Use it to get the |
| span_width and then set it to 0. */ |
| cfa->reg.span_width = cfa->offset.to_constant () / 8; |
| cfa->offset = 0; |
| } |
| break; |
| case DW_OP_deref: |
| cfa->indirect = 1; |
| break; |
| case DW_OP_shl: |
| break; |
| case DW_OP_lit0: |
| case DW_OP_lit1: |
| case DW_OP_lit2: |
| case DW_OP_lit3: |
| case DW_OP_lit4: |
| case DW_OP_lit5: |
| case DW_OP_lit6: |
| case DW_OP_lit7: |
| case DW_OP_lit8: |
| case DW_OP_lit9: |
| case DW_OP_lit10: |
| case DW_OP_lit11: |
| case DW_OP_lit12: |
| case DW_OP_lit13: |
| case DW_OP_lit14: |
| case DW_OP_lit15: |
| case DW_OP_lit16: |
| case DW_OP_lit17: |
| case DW_OP_lit18: |
| case DW_OP_lit19: |
| case DW_OP_lit20: |
| case DW_OP_lit21: |
| case DW_OP_lit22: |
| case DW_OP_lit23: |
| case DW_OP_lit24: |
| case DW_OP_lit25: |
| case DW_OP_lit26: |
| case DW_OP_lit27: |
| case DW_OP_lit28: |
| case DW_OP_lit29: |
| case DW_OP_lit30: |
| case DW_OP_lit31: |
| gcc_assert (known_eq (cfa->offset, 0)); |
| cfa->offset = op - DW_OP_lit0; |
| break; |
| case DW_OP_const1u: |
| case DW_OP_const1s: |
| case DW_OP_const2u: |
| case DW_OP_const2s: |
| case DW_OP_const4s: |
| case DW_OP_const8s: |
| case DW_OP_constu: |
| case DW_OP_consts: |
| gcc_assert (known_eq (cfa->offset, 0)); |
| cfa->offset = ptr->dw_loc_oprnd1.v.val_int; |
| break; |
| case DW_OP_minus: |
| cfa->offset = -cfa->offset; |
| break; |
| case DW_OP_plus: |
| /* The offset is already in place. */ |
| break; |
| case DW_OP_plus_uconst: |
| cfa->offset = ptr->dw_loc_oprnd1.v.val_unsigned; |
| break; |
| default: |
| gcc_unreachable (); |
| } |
| } |
| } |
| |
| /* Find the previous value for the CFA, iteratively. CFI is the opcode |
| to interpret, *LOC will be updated as necessary, *REMEMBER is used for |
| one level of remember/restore state processing. */ |
| |
| void |
| lookup_cfa_1 (dw_cfi_ref cfi, dw_cfa_location *loc, dw_cfa_location *remember) |
| { |
| switch (cfi->dw_cfi_opc) |
| { |
| case DW_CFA_def_cfa_offset: |
| case DW_CFA_def_cfa_offset_sf: |
| loc->offset = cfi->dw_cfi_oprnd1.dw_cfi_offset; |
| break; |
| case DW_CFA_def_cfa_register: |
| loc->reg.set_by_dwreg (cfi->dw_cfi_oprnd1.dw_cfi_reg_num); |
| break; |
| case DW_CFA_def_cfa: |
| case DW_CFA_def_cfa_sf: |
| loc->reg.set_by_dwreg (cfi->dw_cfi_oprnd1.dw_cfi_reg_num); |
| loc->offset = cfi->dw_cfi_oprnd2.dw_cfi_offset; |
| break; |
| case DW_CFA_def_cfa_expression: |
| if (cfi->dw_cfi_oprnd2.dw_cfi_cfa_loc) |
| *loc = *cfi->dw_cfi_oprnd2.dw_cfi_cfa_loc; |
| else |
| get_cfa_from_loc_descr (loc, cfi->dw_cfi_oprnd1.dw_cfi_loc); |
| break; |
| |
| case DW_CFA_remember_state: |
| gcc_assert (!remember->in_use); |
| *remember = *loc; |
| remember->in_use = 1; |
| break; |
| case DW_CFA_restore_state: |
| gcc_assert (remember->in_use); |
| *loc = *remember; |
| remember->in_use = 0; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /* Determine if two dw_cfa_location structures define the same data. */ |
| |
| bool |
| cfa_equal_p (const dw_cfa_location *loc1, const dw_cfa_location *loc2) |
| { |
| return (loc1->reg == loc2->reg |
| && known_eq (loc1->offset, loc2->offset) |
| && loc1->indirect == loc2->indirect |
| && (loc1->indirect == 0 |
| || known_eq (loc1->base_offset, loc2->base_offset))); |
| } |
| |
| /* Determine if two CFI operands are identical. */ |
| |
| static bool |
| cfi_oprnd_equal_p (enum dw_cfi_oprnd_type t, dw_cfi_oprnd *a, dw_cfi_oprnd *b) |
| { |
| switch (t) |
| { |
| case dw_cfi_oprnd_unused: |
| return true; |
| case dw_cfi_oprnd_reg_num: |
| return a->dw_cfi_reg_num == b->dw_cfi_reg_num; |
| case dw_cfi_oprnd_offset: |
| return a->dw_cfi_offset == b->dw_cfi_offset; |
| case dw_cfi_oprnd_addr: |
| return (a->dw_cfi_addr == b->dw_cfi_addr |
| || strcmp (a->dw_cfi_addr, b->dw_cfi_addr) == 0); |
| case dw_cfi_oprnd_loc: |
| return loc_descr_equal_p (a->dw_cfi_loc, b->dw_cfi_loc); |
| case dw_cfi_oprnd_cfa_loc: |
| /* If any of them is NULL, don't dereference either. */ |
| if (!a->dw_cfi_cfa_loc || !b->dw_cfi_cfa_loc) |
| return a->dw_cfi_cfa_loc == b->dw_cfi_cfa_loc; |
| return cfa_equal_p (a->dw_cfi_cfa_loc, b->dw_cfi_cfa_loc); |
| } |
| gcc_unreachable (); |
| } |
| |
| /* Determine if two CFI entries are identical. */ |
| |
| static bool |
| cfi_equal_p (dw_cfi_ref a, dw_cfi_ref b) |
| { |
| enum dwarf_call_frame_info opc; |
| |
| /* Make things easier for our callers, including missing operands. */ |
| if (a == b) |
| return true; |
| if (a == NULL || b == NULL) |
| return false; |
| |
| /* Obviously, the opcodes must match. */ |
| opc = a->dw_cfi_opc; |
| if (opc != b->dw_cfi_opc) |
| return false; |
| |
| /* Compare the two operands, re-using the type of the operands as |
| already exposed elsewhere. */ |
| return (cfi_oprnd_equal_p (dw_cfi_oprnd1_desc (opc), |
| &a->dw_cfi_oprnd1, &b->dw_cfi_oprnd1) |
| && cfi_oprnd_equal_p (dw_cfi_oprnd2_desc (opc), |
| &a->dw_cfi_oprnd2, &b->dw_cfi_oprnd2)); |
| } |
| |
| /* Determine if two CFI_ROW structures are identical. */ |
| |
| static bool |
| cfi_row_equal_p (dw_cfi_row *a, dw_cfi_row *b) |
| { |
| size_t i, n_a, n_b, n_max; |
| |
| if (a->cfa_cfi) |
| { |
| if (!cfi_equal_p (a->cfa_cfi, b->cfa_cfi)) |
| return false; |
| } |
| else if (!cfa_equal_p (&a->cfa, &b->cfa)) |
| return false; |
| |
| n_a = vec_safe_length (a->reg_save); |
| n_b = vec_safe_length (b->reg_save); |
| n_max = MAX (n_a, n_b); |
| |
| for (i = 0; i < n_max; ++i) |
| { |
| dw_cfi_ref r_a = NULL, r_b = NULL; |
| |
| if (i < n_a) |
| r_a = (*a->reg_save)[i]; |
| if (i < n_b) |
| r_b = (*b->reg_save)[i]; |
| |
| if (!cfi_equal_p (r_a, r_b)) |
| return false; |
| } |
| |
| if (a->window_save != b->window_save) |
| return false; |
| |
| if (a->ra_mangled != b->ra_mangled) |
| return false; |
| |
| return true; |
| } |
| |
| /* The CFA is now calculated from NEW_CFA. Consider OLD_CFA in determining |
| what opcode to emit. Returns the CFI opcode to effect the change, or |
| NULL if NEW_CFA == OLD_CFA. */ |
| |
| static dw_cfi_ref |
| def_cfa_0 (dw_cfa_location *old_cfa, dw_cfa_location *new_cfa) |
| { |
| dw_cfi_ref cfi; |
| |
| /* If nothing changed, no need to issue any call frame instructions. */ |
| if (cfa_equal_p (old_cfa, new_cfa)) |
| return NULL; |
| |
| cfi = new_cfi (); |
| |
| HOST_WIDE_INT const_offset; |
| if (new_cfa->reg == old_cfa->reg |
| && new_cfa->reg.span == 1 |
| && !new_cfa->indirect |
| && !old_cfa->indirect |
| && new_cfa->offset.is_constant (&const_offset)) |
| { |
| /* Construct a "DW_CFA_def_cfa_offset <offset>" instruction, indicating |
| the CFA register did not change but the offset did. The data |
| factoring for DW_CFA_def_cfa_offset_sf happens in output_cfi, or |
| in the assembler via the .cfi_def_cfa_offset directive. */ |
| if (const_offset < 0) |
| cfi->dw_cfi_opc = DW_CFA_def_cfa_offset_sf; |
| else |
| cfi->dw_cfi_opc = DW_CFA_def_cfa_offset; |
| cfi->dw_cfi_oprnd1.dw_cfi_offset = const_offset; |
| } |
| else if (new_cfa->offset.is_constant () |
| && known_eq (new_cfa->offset, old_cfa->offset) |
| && old_cfa->reg.reg != INVALID_REGNUM |
| && new_cfa->reg.span == 1 |
| && !new_cfa->indirect |
| && !old_cfa->indirect) |
| { |
| /* Construct a "DW_CFA_def_cfa_register <register>" instruction, |
| indicating the CFA register has changed to <register> but the |
| offset has not changed. This requires the old CFA to have |
| been set as a register plus offset rather than a general |
| DW_CFA_def_cfa_expression. */ |
| cfi->dw_cfi_opc = DW_CFA_def_cfa_register; |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = new_cfa->reg.reg; |
| } |
| else if (new_cfa->indirect == 0 |
| && new_cfa->offset.is_constant (&const_offset) |
| && new_cfa->reg.span == 1) |
| { |
| /* Construct a "DW_CFA_def_cfa <register> <offset>" instruction, |
| indicating the CFA register has changed to <register> with |
| the specified offset. The data factoring for DW_CFA_def_cfa_sf |
| happens in output_cfi, or in the assembler via the .cfi_def_cfa |
| directive. */ |
| if (const_offset < 0) |
| cfi->dw_cfi_opc = DW_CFA_def_cfa_sf; |
| else |
| cfi->dw_cfi_opc = DW_CFA_def_cfa; |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = new_cfa->reg.reg; |
| cfi->dw_cfi_oprnd2.dw_cfi_offset = const_offset; |
| } |
| else |
| { |
| /* Construct a DW_CFA_def_cfa_expression instruction to |
| calculate the CFA using a full location expression since no |
| register-offset pair is available. */ |
| struct dw_loc_descr_node *loc_list; |
| |
| cfi->dw_cfi_opc = DW_CFA_def_cfa_expression; |
| loc_list = build_cfa_loc (new_cfa, 0); |
| cfi->dw_cfi_oprnd1.dw_cfi_loc = loc_list; |
| if (!new_cfa->offset.is_constant () |
| || !new_cfa->base_offset.is_constant ()) |
| /* It's hard to reconstruct the CFA location for a polynomial |
| expression, so just cache it instead. */ |
| cfi->dw_cfi_oprnd2.dw_cfi_cfa_loc = copy_cfa (new_cfa); |
| else |
| cfi->dw_cfi_oprnd2.dw_cfi_cfa_loc = NULL; |
| } |
| |
| return cfi; |
| } |
| |
| /* Similarly, but take OLD_CFA from CUR_ROW, and update it after the fact. */ |
| |
| static void |
| def_cfa_1 (dw_cfa_location *new_cfa) |
| { |
| dw_cfi_ref cfi; |
| |
| if (cur_trace->cfa_store.reg == new_cfa->reg && new_cfa->indirect == 0) |
| cur_trace->cfa_store.offset = new_cfa->offset; |
| |
| cfi = def_cfa_0 (&cur_row->cfa, new_cfa); |
| if (cfi) |
| { |
| cur_row->cfa = *new_cfa; |
| cur_row->cfa_cfi = (cfi->dw_cfi_opc == DW_CFA_def_cfa_expression |
| ? cfi : NULL); |
| |
| add_cfi (cfi); |
| } |
| } |
| |
| /* Add the CFI for saving a register. REG is the CFA column number. |
| If SREG is INVALID_REGISTER, the register is saved at OFFSET from the CFA; |
| otherwise it is saved in SREG. */ |
| |
| static void |
| reg_save (unsigned int reg, struct cfa_reg sreg, poly_int64 offset) |
| { |
| dw_fde_ref fde = cfun ? cfun->fde : NULL; |
| dw_cfi_ref cfi = new_cfi (); |
| |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = reg; |
| |
| if (sreg.reg == INVALID_REGNUM) |
| { |
| HOST_WIDE_INT const_offset; |
| /* When stack is aligned, store REG using DW_CFA_expression with FP. */ |
| if (fde && fde->stack_realign) |
| { |
| cfi->dw_cfi_opc = DW_CFA_expression; |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = reg; |
| cfi->dw_cfi_oprnd2.dw_cfi_loc |
| = build_cfa_aligned_loc (&cur_row->cfa, offset, |
| fde->stack_realignment); |
| } |
| else if (offset.is_constant (&const_offset)) |
| { |
| if (need_data_align_sf_opcode (const_offset)) |
| cfi->dw_cfi_opc = DW_CFA_offset_extended_sf; |
| else if (reg & ~0x3f) |
| cfi->dw_cfi_opc = DW_CFA_offset_extended; |
| else |
| cfi->dw_cfi_opc = DW_CFA_offset; |
| cfi->dw_cfi_oprnd2.dw_cfi_offset = const_offset; |
| } |
| else |
| { |
| cfi->dw_cfi_opc = DW_CFA_expression; |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = reg; |
| cfi->dw_cfi_oprnd2.dw_cfi_loc |
| = build_cfa_loc (&cur_row->cfa, offset); |
| } |
| } |
| else if (sreg.reg == reg) |
| { |
| /* While we could emit something like DW_CFA_same_value or |
| DW_CFA_restore, we never expect to see something like that |
| in a prologue. This is more likely to be a bug. A backend |
| can always bypass this by using REG_CFA_RESTORE directly. */ |
| gcc_unreachable (); |
| } |
| else if (sreg.span > 1) |
| { |
| cfi->dw_cfi_opc = DW_CFA_expression; |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = reg; |
| cfi->dw_cfi_oprnd2.dw_cfi_loc = build_span_loc (sreg); |
| } |
| else |
| { |
| cfi->dw_cfi_opc = DW_CFA_register; |
| cfi->dw_cfi_oprnd2.dw_cfi_reg_num = sreg.reg; |
| } |
| |
| add_cfi (cfi); |
| update_row_reg_save (cur_row, reg, cfi); |
| } |
| |
| /* A subroutine of scan_trace. Check INSN for a REG_ARGS_SIZE note |
| and adjust data structures to match. */ |
| |
| static void |
| notice_args_size (rtx_insn *insn) |
| { |
| poly_int64 args_size, delta; |
| rtx note; |
| |
| note = find_reg_note (insn, REG_ARGS_SIZE, NULL); |
| if (note == NULL) |
| return; |
| |
| if (!cur_trace->eh_head) |
| cur_trace->args_size_defined_for_eh = true; |
| |
| args_size = get_args_size (note); |
| delta = args_size - cur_trace->end_true_args_size; |
| if (known_eq (delta, 0)) |
| return; |
| |
| cur_trace->end_true_args_size = args_size; |
| |
| /* If the CFA is computed off the stack pointer, then we must adjust |
| the computation of the CFA as well. */ |
| if (cur_cfa->reg == dw_stack_pointer_regnum) |
| { |
| gcc_assert (!cur_cfa->indirect); |
| |
| /* Convert a change in args_size (always a positive in the |
| direction of stack growth) to a change in stack pointer. */ |
| if (!STACK_GROWS_DOWNWARD) |
| delta = -delta; |
| |
| cur_cfa->offset += delta; |
| } |
| } |
| |
| /* A subroutine of scan_trace. INSN is can_throw_internal. Update the |
| data within the trace related to EH insns and args_size. */ |
| |
| static void |
| notice_eh_throw (rtx_insn *insn) |
| { |
| poly_int64 args_size = cur_trace->end_true_args_size; |
| if (cur_trace->eh_head == NULL) |
| { |
| cur_trace->eh_head = insn; |
| cur_trace->beg_delay_args_size = args_size; |
| cur_trace->end_delay_args_size = args_size; |
| } |
| else if (maybe_ne (cur_trace->end_delay_args_size, args_size)) |
| { |
| cur_trace->end_delay_args_size = args_size; |
| |
| /* ??? If the CFA is the stack pointer, search backward for the last |
| CFI note and insert there. Given that the stack changed for the |
| args_size change, there *must* be such a note in between here and |
| the last eh insn. */ |
| add_cfi_args_size (args_size); |
| } |
| } |
| |
| /* Short-hand inline for the very common D_F_R (REGNO (x)) operation. */ |
| /* ??? This ought to go into dwarf2out.h, except that dwarf2out.h is |
| used in places where rtl is prohibited. */ |
| |
| static inline unsigned |
| dwf_regno (const_rtx reg) |
| { |
| gcc_assert (REGNO (reg) < FIRST_PSEUDO_REGISTER); |
| return DWARF_FRAME_REGNUM (REGNO (reg)); |
| } |
| |
| /* Like dwf_regno, but when the value can span multiple registers. */ |
| |
| static struct cfa_reg |
| dwf_cfa_reg (rtx reg) |
| { |
| struct cfa_reg result; |
| |
| result.reg = dwf_regno (reg); |
| result.span = 1; |
| result.span_width = 0; |
| |
| rtx span = targetm.dwarf_register_span (reg); |
| if (span) |
| { |
| /* We only support the simple case of consecutive registers all with the |
| same size. */ |
| result.span = XVECLEN (span, 0); |
| result.span_width = GET_MODE_SIZE (GET_MODE (XVECEXP (span, 0, 0))) |
| .to_constant (); |
| |
| if (CHECKING_P) |
| { |
| /* Ensure that the above assumption is accurate. */ |
| for (unsigned int i = 0; i < result.span; i++) |
| { |
| gcc_assert (GET_MODE_SIZE (GET_MODE (XVECEXP (span, 0, i))) |
| .to_constant () == result.span_width); |
| gcc_assert (REG_P (XVECEXP (span, 0, i))); |
| gcc_assert (dwf_regno (XVECEXP (span, 0, i)) == result.reg + i); |
| } |
| } |
| } |
| |
| return result; |
| } |
| |
| /* More efficient comparisons that don't call targetm.dwarf_register_span |
| unnecessarily. These cfa_reg vs. rtx comparisons should be done at |
| least for call-saved REGs that might not be CFA related (like stack |
| pointer, hard frame pointer or DRAP registers are), in other cases it is |
| just a compile time and memory optimization. */ |
| |
| static bool |
| operator== (cfa_reg &cfa, rtx reg) |
| { |
| unsigned int regno = dwf_regno (reg); |
| if (cfa.reg != regno) |
| return false; |
| struct cfa_reg other = dwf_cfa_reg (reg); |
| return cfa == other; |
| } |
| |
| static inline bool |
| operator!= (cfa_reg &cfa, rtx reg) |
| { |
| return !(cfa == reg); |
| } |
| |
| /* Compare X and Y for equivalence. The inputs may be REGs or PC_RTX. */ |
| |
| static bool |
| compare_reg_or_pc (rtx x, rtx y) |
| { |
| if (REG_P (x) && REG_P (y)) |
| return REGNO (x) == REGNO (y); |
| return x == y; |
| } |
| |
| /* Record SRC as being saved in DEST. DEST may be null to delete an |
| existing entry. SRC may be a register or PC_RTX. */ |
| |
| static void |
| record_reg_saved_in_reg (rtx dest, rtx src) |
| { |
| reg_saved_in_data *elt; |
| size_t i; |
| |
| FOR_EACH_VEC_ELT (cur_trace->regs_saved_in_regs, i, elt) |
| if (compare_reg_or_pc (elt->orig_reg, src)) |
| { |
| if (dest == NULL) |
| cur_trace->regs_saved_in_regs.unordered_remove (i); |
| else |
| elt->saved_in_reg = dest; |
| return; |
| } |
| |
| if (dest == NULL) |
| return; |
| |
| reg_saved_in_data e = {src, dest}; |
| cur_trace->regs_saved_in_regs.safe_push (e); |
| } |
| |
| /* Add an entry to QUEUED_REG_SAVES saying that REG is now saved at |
| SREG, or if SREG is NULL then it is saved at OFFSET to the CFA. */ |
| |
| static void |
| queue_reg_save (rtx reg, rtx sreg, poly_int64 offset) |
| { |
| queued_reg_save *q; |
| queued_reg_save e = {reg, sreg, offset}; |
| size_t i; |
| |
| /* Duplicates waste space, but it's also necessary to remove them |
| for correctness, since the queue gets output in reverse order. */ |
| FOR_EACH_VEC_ELT (queued_reg_saves, i, q) |
| if (compare_reg_or_pc (q->reg, reg)) |
| { |
| *q = e; |
| return; |
| } |
| |
| queued_reg_saves.safe_push (e); |
| } |
| |
| /* Output all the entries in QUEUED_REG_SAVES. */ |
| |
| static void |
| dwarf2out_flush_queued_reg_saves (void) |
| { |
| queued_reg_save *q; |
| size_t i; |
| |
| FOR_EACH_VEC_ELT (queued_reg_saves, i, q) |
| { |
| unsigned int reg; |
| struct cfa_reg sreg; |
| |
| record_reg_saved_in_reg (q->saved_reg, q->reg); |
| |
| if (q->reg == pc_rtx) |
| reg = DWARF_FRAME_RETURN_COLUMN; |
| else |
| reg = dwf_regno (q->reg); |
| if (q->saved_reg) |
| sreg = dwf_cfa_reg (q->saved_reg); |
| else |
| sreg.set_by_dwreg (INVALID_REGNUM); |
| reg_save (reg, sreg, q->cfa_offset); |
| } |
| |
| queued_reg_saves.truncate (0); |
| } |
| |
| /* Does INSN clobber any register which QUEUED_REG_SAVES lists a saved |
| location for? Or, does it clobber a register which we've previously |
| said that some other register is saved in, and for which we now |
| have a new location for? */ |
| |
| static bool |
| clobbers_queued_reg_save (const_rtx insn) |
| { |
| queued_reg_save *q; |
| size_t iq; |
| |
| FOR_EACH_VEC_ELT (queued_reg_saves, iq, q) |
| { |
| size_t ir; |
| reg_saved_in_data *rir; |
| |
| if (modified_in_p (q->reg, insn)) |
| return true; |
| |
| FOR_EACH_VEC_ELT (cur_trace->regs_saved_in_regs, ir, rir) |
| if (compare_reg_or_pc (q->reg, rir->orig_reg) |
| && modified_in_p (rir->saved_in_reg, insn)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* What register, if any, is currently saved in REG? */ |
| |
| static rtx |
| reg_saved_in (rtx reg) |
| { |
| unsigned int regn = REGNO (reg); |
| queued_reg_save *q; |
| reg_saved_in_data *rir; |
| size_t i; |
| |
| FOR_EACH_VEC_ELT (queued_reg_saves, i, q) |
| if (q->saved_reg && regn == REGNO (q->saved_reg)) |
| return q->reg; |
| |
| FOR_EACH_VEC_ELT (cur_trace->regs_saved_in_regs, i, rir) |
| if (regn == REGNO (rir->saved_in_reg)) |
| return rir->orig_reg; |
| |
| return NULL_RTX; |
| } |
| |
| /* A subroutine of dwarf2out_frame_debug, process a REG_DEF_CFA note. */ |
| |
| static void |
| dwarf2out_frame_debug_def_cfa (rtx pat) |
| { |
| memset (cur_cfa, 0, sizeof (*cur_cfa)); |
| |
| pat = strip_offset (pat, &cur_cfa->offset); |
| if (MEM_P (pat)) |
| { |
| cur_cfa->indirect = 1; |
| pat = strip_offset (XEXP (pat, 0), &cur_cfa->base_offset); |
| } |
| /* ??? If this fails, we could be calling into the _loc functions to |
| define a full expression. So far no port does that. */ |
| gcc_assert (REG_P (pat)); |
| cur_cfa->reg = dwf_cfa_reg (pat); |
| } |
| |
| /* A subroutine of dwarf2out_frame_debug, process a REG_ADJUST_CFA note. */ |
| |
| static void |
| dwarf2out_frame_debug_adjust_cfa (rtx pat) |
| { |
| rtx src, dest; |
| |
| gcc_assert (GET_CODE (pat) == SET); |
| dest = XEXP (pat, 0); |
| src = XEXP (pat, 1); |
| |
| switch (GET_CODE (src)) |
| { |
| case PLUS: |
| gcc_assert (cur_cfa->reg == XEXP (src, 0)); |
| cur_cfa->offset -= rtx_to_poly_int64 (XEXP (src, 1)); |
| break; |
| |
| case REG: |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| cur_cfa->reg = dwf_cfa_reg (dest); |
| gcc_assert (cur_cfa->indirect == 0); |
| } |
| |
| /* A subroutine of dwarf2out_frame_debug, process a REG_CFA_OFFSET note. */ |
| |
| static void |
| dwarf2out_frame_debug_cfa_offset (rtx set) |
| { |
| poly_int64 offset; |
| rtx src, addr, span; |
| unsigned int sregno; |
| |
| src = XEXP (set, 1); |
| addr = XEXP (set, 0); |
| gcc_assert (MEM_P (addr)); |
| addr = XEXP (addr, 0); |
| |
| /* As documented, only consider extremely simple addresses. */ |
| switch (GET_CODE (addr)) |
| { |
| case REG: |
| gcc_assert (cur_cfa->reg == addr); |
| offset = -cur_cfa->offset; |
| break; |
| case PLUS: |
| gcc_assert (cur_cfa->reg == XEXP (addr, 0)); |
| offset = rtx_to_poly_int64 (XEXP (addr, 1)) - cur_cfa->offset; |
| break; |
| default: |
| gcc_unreachable (); |
| } |
| |
| if (src == pc_rtx) |
| { |
| span = NULL; |
| sregno = DWARF_FRAME_RETURN_COLUMN; |
| } |
| else |
| { |
| span = targetm.dwarf_register_span (src); |
| sregno = dwf_regno (src); |
| } |
| |
| /* ??? We'd like to use queue_reg_save, but we need to come up with |
| a different flushing heuristic for epilogues. */ |
| struct cfa_reg invalid; |
| invalid.set_by_dwreg (INVALID_REGNUM); |
| if (!span) |
| reg_save (sregno, invalid, offset); |
| else |
| { |
| /* We have a PARALLEL describing where the contents of SRC live. |
| Adjust the offset for each piece of the PARALLEL. */ |
| poly_int64 span_offset = offset; |
| |
| gcc_assert (GET_CODE (span) == PARALLEL); |
| |
| const int par_len = XVECLEN (span, 0); |
| for (int par_index = 0; par_index < par_len; par_index++) |
| { |
| rtx elem = XVECEXP (span, 0, par_index); |
| sregno = dwf_regno (src); |
| reg_save (sregno, invalid, span_offset); |
| span_offset += GET_MODE_SIZE (GET_MODE (elem)); |
| } |
| } |
| } |
| |
| /* A subroutine of dwarf2out_frame_debug, process a REG_CFA_REGISTER note. */ |
| |
| static void |
| dwarf2out_frame_debug_cfa_register (rtx set) |
| { |
| rtx src, dest; |
| unsigned sregno; |
| struct cfa_reg dregno; |
| |
| src = XEXP (set, 1); |
| dest = XEXP (set, 0); |
| |
| record_reg_saved_in_reg (dest, src); |
| if (src == pc_rtx) |
| sregno = DWARF_FRAME_RETURN_COLUMN; |
| else |
| sregno = dwf_regno (src); |
| |
| dregno = dwf_cfa_reg (dest); |
| |
| /* ??? We'd like to use queue_reg_save, but we need to come up with |
| a different flushing heuristic for epilogues. */ |
| reg_save (sregno, dregno, 0); |
| } |
| |
| /* A subroutine of dwarf2out_frame_debug, process a REG_CFA_EXPRESSION note. */ |
| |
| static void |
| dwarf2out_frame_debug_cfa_expression (rtx set) |
| { |
| rtx src, dest, span; |
| dw_cfi_ref cfi = new_cfi (); |
| unsigned regno; |
| |
| dest = SET_DEST (set); |
| src = SET_SRC (set); |
| |
| gcc_assert (REG_P (src)); |
| gcc_assert (MEM_P (dest)); |
| |
| span = targetm.dwarf_register_span (src); |
| gcc_assert (!span); |
| |
| regno = dwf_regno (src); |
| |
| cfi->dw_cfi_opc = DW_CFA_expression; |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = regno; |
| cfi->dw_cfi_oprnd2.dw_cfi_loc |
| = mem_loc_descriptor (XEXP (dest, 0), get_address_mode (dest), |
| GET_MODE (dest), VAR_INIT_STATUS_INITIALIZED); |
| |
| /* ??? We'd like to use queue_reg_save, were the interface different, |
| and, as above, we could manage flushing for epilogues. */ |
| add_cfi (cfi); |
| update_row_reg_save (cur_row, regno, cfi); |
| } |
| |
| /* A subroutine of dwarf2out_frame_debug, process a REG_CFA_VAL_EXPRESSION |
| note. */ |
| |
| static void |
| dwarf2out_frame_debug_cfa_val_expression (rtx set) |
| { |
| rtx dest = SET_DEST (set); |
| gcc_assert (REG_P (dest)); |
| |
| rtx span = targetm.dwarf_register_span (dest); |
| gcc_assert (!span); |
| |
| rtx src = SET_SRC (set); |
| dw_cfi_ref cfi = new_cfi (); |
| cfi->dw_cfi_opc = DW_CFA_val_expression; |
| cfi->dw_cfi_oprnd1.dw_cfi_reg_num = dwf_regno (dest); |
| cfi->dw_cfi_oprnd2.dw_cfi_loc |
| = mem_loc_descriptor (src, GET_MODE (src), |
| GET_MODE (dest), VAR_INIT_STATUS_INITIALIZED); |
| add_cfi (cfi); |
| update_row_reg_save (cur_row, dwf_regno (dest), cfi); |
| } |
| |
| /* A subroutine of dwarf2out_frame_debug, process a REG_CFA_RESTORE note. */ |
| |
| static void |
| dwarf2out_frame_debug_cfa_restore (rtx reg) |
| { |
| gcc_assert (REG_P (reg)); |
| |
| rtx span = targetm.dwarf_register_span (reg); |
| if (!span) |
| { |
| unsigned int regno = dwf_regno (reg); |
| add_cfi_restore (regno); |
| update_row_reg_save (cur_row, regno, NULL); |
| } |
| else |
| { |
| /* We have a PARALLEL describing where the contents of REG live. |
| Restore the register for each piece of the PARALLEL. */ |
| gcc_assert (GET_CODE (span) == PARALLEL); |
| |
| const int par_len = XVECLEN (span, 0); |
| for (int par_index = 0; par_index < par_len; par_index++) |
| { |
| reg = XVECEXP (span, 0, par_index); |
| gcc_assert (REG_P (reg)); |
| unsigned int regno = dwf_regno (reg); |
| add_cfi_restore (regno); |
| update_row_reg_save (cur_row, regno, NULL); |
| } |
| } |
| } |
| |
| /* A subroutine of dwarf2out_frame_debug, process a REG_CFA_WINDOW_SAVE. |
| |
| ??? Perhaps we should note in the CIE where windows are saved (instead |
| of assuming 0(cfa)) and what registers are in the window. */ |
| |
| static void |
| dwarf2out_frame_debug_cfa_window_save (void) |
| { |
| dw_cfi_ref cfi = new_cfi (); |
| |
| cfi->dw_cfi_opc = DW_CFA_GNU_window_save; |
| add_cfi (cfi); |
| cur_row->window_save = true; |
| } |
| |
| /* A subroutine of dwarf2out_frame_debug, process a REG_CFA_TOGGLE_RA_MANGLE. |
| Note: DW_CFA_GNU_window_save dwarf opcode is reused for toggling RA mangle |
| state, this is a target specific operation on AArch64 and can only be used |
| on other targets if they don't use the window save operation otherwise. */ |
| |
| static void |
| dwarf2out_frame_debug_cfa_toggle_ra_mangle (void) |
| { |
| dw_cfi_ref cfi = new_cfi (); |
| |
| cfi->dw_cfi_opc = DW_CFA_GNU_window_save; |
| add_cfi (cfi); |
| cur_row->ra_mangled = !cur_row->ra_mangled; |
| } |
| |
| /* Record call frame debugging information for an expression EXPR, |
| which either sets SP or FP (adjusting how we calculate the frame |
| address) or saves a register to the stack or another register. |
| LABEL indicates the address of EXPR. |
| |
| This function encodes a state machine mapping rtxes to actions on |
| cfa, cfa_store, and cfa_temp.reg. We describe these rules so |
| users need not read the source code. |
| |
| The High-Level Picture |
| |
| Changes in the register we use to calculate the CFA: Currently we |
| assume that if you copy the CFA register into another register, we |
| should take the other one as the new CFA register; this seems to |
| work pretty well. If it's wrong for some target, it's simple |
| enough not to set RTX_FRAME_RELATED_P on the insn in question. |
| |
| Changes in the register we use for saving registers to the stack: |
| This is usually SP, but not always. Again, we deduce that if you |
| copy SP into another register (and SP is not the CFA register), |
| then the new register is the one we will be using for register |
| saves. This also seems to work. |
| |
| Register saves: There's not much guesswork about this one; if |
| RTX_FRAME_RELATED_P is set on an insn which modifies memory, it's a |
| register save, and the register used to calculate the destination |
| had better be the one we think we're using for this purpose. |
| It's also assumed that a copy from a call-saved register to another |
| register is saving that register if RTX_FRAME_RELATED_P is set on |
| that instruction. If the copy is from a call-saved register to |
| the *same* register, that means that the register is now the same |
| value as in the caller. |
| |
| Except: If the register being saved is the CFA register, and the |
| offset is nonzero, we are saving the CFA, so we assume we have to |
| use DW_CFA_def_cfa_expression. If the offset is 0, we assume that |
| the intent is to save the value of SP from the previous frame. |
| |
| In addition, if a register has previously been saved to a different |
| register, |
| |
| Invariants / Summaries of Rules |
| |
| cfa current rule for calculating the CFA. It usually |
| consists of a register and an offset. This is |
| actually stored in *cur_cfa, but abbreviated |
| for the purposes of this documentation. |
| cfa_store register used by prologue code to save things to the stack |
| cfa_store.offset is the offset from the value of |
| cfa_store.reg to the actual CFA |
| cfa_temp register holding an integral value. cfa_temp.offset |
| stores the value, which will be used to adjust the |
| stack pointer. cfa_temp is also used like cfa_store, |
| to track stores to the stack via fp or a temp reg. |
| |
| Rules 1- 4: Setting a register's value to cfa.reg or an expression |
| with cfa.reg as the first operand changes the cfa.reg and its |
| cfa.offset. Rule 1 and 4 also set cfa_temp.reg and |
| cfa_temp.offset. |
| |
| Rules 6- 9: Set a non-cfa.reg register value to a constant or an |
| expression yielding a constant. This sets cfa_temp.reg |
| and cfa_temp.offset. |
| |
| Rule 5: Create a new register cfa_store used to save items to the |
| stack. |
| |
| Rules 10-14: Save a register to the stack. Define offset as the |
| difference of the original location and cfa_store's |
| location (or cfa_temp's location if cfa_temp is used). |
| |
| Rules 16-20: If AND operation happens on sp in prologue, we assume |
| stack is realigned. We will use a group of DW_OP_XXX |
| expressions to represent the location of the stored |
| register instead of CFA+offset. |
| |
| The Rules |
| |
| "{a,b}" indicates a choice of a xor b. |
| "<reg>:cfa.reg" indicates that <reg> must equal cfa.reg. |
| |
| Rule 1: |
| (set <reg1> <reg2>:cfa.reg) |
| effects: cfa.reg = <reg1> |
| cfa.offset unchanged |
| cfa_temp.reg = <reg1> |
| cfa_temp.offset = cfa.offset |
| |
| Rule 2: |
| (set sp ({minus,plus,losum} {sp,fp}:cfa.reg |
| {<const_int>,<reg>:cfa_temp.reg})) |
| effects: cfa.reg = sp if fp used |
| cfa.offset += {+/- <const_int>, cfa_temp.offset} if cfa.reg==sp |
| cfa_store.offset += {+/- <const_int>, cfa_temp.offset} |
| if cfa_store.reg==sp |
| |
| Rule 3: |
| (set fp ({minus,plus,losum} <reg>:cfa.reg <const_int>)) |
| effects: cfa.reg = fp |
| cfa_offset += +/- <const_int> |
| |
| Rule 4: |
| (set <reg1> ({plus,losum} <reg2>:cfa.reg <const_int>)) |
| constraints: <reg1> != fp |
| <reg1> != sp |
| effects: cfa.reg = <reg1> |
| cfa_temp.reg = <reg1> |
| cfa_temp.offset = cfa.offset |
| |
| Rule 5: |
| (set <reg1> (plus <reg2>:cfa_temp.reg sp:cfa.reg)) |
| constraints: <reg1> != fp |
| <reg1> != sp |
| effects: cfa_store.reg = <reg1> |
| cfa_store.offset = cfa.offset - cfa_temp.offset |
| |
| Rule 6: |
| (set <reg> <const_int>) |
| effects: cfa_temp.reg = <reg> |
| cfa_temp.offset = <const_int> |
| |
| Rule 7: |
| (set <reg1>:cfa_temp.reg (ior <reg2>:cfa_temp.reg <const_int>)) |
| effects: cfa_temp.reg = <reg1> |
| cfa_temp.offset |= <const_int> |
| |
| Rule 8: |
| (set <reg> (high <exp>)) |
| effects: none |
| |
| Rule 9: |
| (set <reg> (lo_sum <exp> <const_int>)) |
| effects: cfa_temp.reg = <reg> |
| cfa_temp.offset = <const_int> |
| |
| Rule 10: |
| (set (mem ({pre,post}_modify sp:cfa_store (???? <reg1> <const_int>))) <reg2>) |
| effects: cfa_store.offset -= <const_int> |
| cfa.offset = cfa_store.offset if cfa.reg == sp |
| cfa.reg = sp |
| cfa.base_offset = -cfa_store.offset |
| |
| Rule 11: |
| (set (mem ({pre_inc,pre_dec,post_dec} sp:cfa_store.reg)) <reg>) |
| effects: cfa_store.offset += -/+ mode_size(mem) |
| cfa.offset = cfa_store.offset if cfa.reg == sp |
| cfa.reg = sp |
| cfa.base_offset = -cfa_store.offset |
| |
| Rule 12: |
| (set (mem ({minus,plus,losum} <reg1>:{cfa_store,cfa_temp} <const_int>)) |
| |
| <reg2>) |
| effects: cfa.reg = <reg1> |
| cfa.base_offset = -/+ <const_int> - {cfa_store,cfa_temp}.offset |
| |
| Rule 13: |
| (set (mem <reg1>:{cfa_store,cfa_temp}) <reg2>) |
| effects: cfa.reg = <reg1> |
| cfa.base_offset = -{cfa_store,cfa_temp}.offset |
| |
| Rule 14: |
| (set (mem (post_inc <reg1>:cfa_temp <const_int>)) <reg2>) |
| effects: cfa.reg = <reg1> |
| cfa.base_offset = -cfa_temp.offset |
| cfa_temp.offset -= mode_size(mem) |
| |
| Rule 15: |
| (set <reg> {unspec, unspec_volatile}) |
| effects: target-dependent |
| |
| Rule 16: |
| (set sp (and: sp <const_int>)) |
| constraints: cfa_store.reg == sp |
| effects: cfun->fde.stack_realign = 1 |
| cfa_store.offset = 0 |
| fde->drap_reg = cfa.reg if cfa.reg != sp and cfa.reg != fp |
| |
| Rule 17: |
| (set (mem ({pre_inc, pre_dec} sp)) (mem (plus (cfa.reg) (const_int)))) |
| effects: cfa_store.offset += -/+ mode_size(mem) |
| |
| Rule 18: |
| (set (mem ({pre_inc, pre_dec} sp)) fp) |
| constraints: fde->stack_realign == 1 |
| effects: cfa_store.offset = 0 |
| cfa.reg != HARD_FRAME_POINTER_REGNUM |
| |
| Rule 19: |
| (set (mem ({pre_inc, pre_dec} sp)) cfa.reg) |
| constraints: fde->stack_realign == 1 |
| && cfa.offset == 0 |
| && cfa.indirect == 0 |
| && cfa.reg != HARD_FRAME_POINTER_REGNUM |
| effects: Use DW_CFA_def_cfa_expression to define cfa |
| cfa.reg == fde->drap_reg */ |
| |
| static void |
| dwarf2out_frame_debug_expr (rtx expr) |
| { |
| rtx src, dest, span; |
| poly_int64 offset; |
| dw_fde_ref fde; |
| |
| /* If RTX_FRAME_RELATED_P is set on a PARALLEL, process each member of |
| the PARALLEL independently. The first element is always processed if |
| it is a SET. This is for backward compatibility. Other elements |
| are processed only if they are SETs and the RTX_FRAME_RELATED_P |
| flag is set in them. */ |
| if (GET_CODE (expr) == PARALLEL || GET_CODE (expr) == SEQUENCE) |
| { |
| int par_index; |
| int limit = XVECLEN (expr, 0); |
| rtx elem; |
| |
| /* PARALLELs have strict read-modify-write semantics, so we |
| ought to evaluate every rvalue before changing any lvalue. |
| It's cumbersome to do that in general, but there's an |
| easy approximation that is enough for all current users: |
| handle register saves before register assignments. */ |
| if (GET_CODE (expr) == PARALLEL) |
| for (par_index = 0; par_index < limit; par_index++) |
| { |
| elem = XVECEXP (expr, 0, par_index); |
| if (GET_CODE (elem) == SET |
| && MEM_P (SET_DEST (elem)) |
| && (RTX_FRAME_RELATED_P (elem) || par_index == 0)) |
| dwarf2out_frame_debug_expr (elem); |
| } |
| |
| for (par_index = 0; par_index < limit; par_index++) |
| { |
| elem = XVECEXP (expr, 0, par_index); |
| if (GET_CODE (elem) == SET |
| && (!MEM_P (SET_DEST (elem)) || GET_CODE (expr) == SEQUENCE) |
| && (RTX_FRAME_RELATED_P (elem) || par_index == 0)) |
| dwarf2out_frame_debug_expr (elem); |
| } |
| return; |
| } |
| |
| gcc_assert (GET_CODE (expr) == SET); |
| |
| src = SET_SRC (expr); |
| dest = SET_DEST (expr); |
| |
| if (REG_P (src)) |
| { |
| rtx rsi = reg_saved_in (src); |
| if (rsi) |
| src = rsi; |
| } |
| |
| fde = cfun->fde; |
| |
| switch (GET_CODE (dest)) |
| { |
| case REG: |
| switch (GET_CODE (src)) |
| { |
| /* Setting FP from SP. */ |
| case REG: |
| if (cur_cfa->reg == src) |
| { |
| /* Rule 1 */ |
| /* Update the CFA rule wrt SP or FP. Make sure src is |
| relative to the current CFA register. |
| |
| We used to require that dest be either SP or FP, but the |
| ARM copies SP to a temporary register, and from there to |
| FP. So we just rely on the backends to only set |
| RTX_FRAME_RELATED_P on appropriate insns. */ |
| cur_cfa->reg = dwf_cfa_reg (dest); |
| cur_trace->cfa_temp.reg = cur_cfa->reg; |
| cur_trace->cfa_temp.offset = cur_cfa->offset; |
| } |
| else |
| { |
| /* Saving a register in a register. */ |
| gcc_assert (!fixed_regs [REGNO (dest)] |
| /* For the SPARC and its register window. */ |
| || (dwf_regno (src) == DWARF_FRAME_RETURN_COLUMN)); |
| |
| /* After stack is aligned, we can only save SP in FP |
| if drap register is used. In this case, we have |
| to restore stack pointer with the CFA value and we |
| don't generate this DWARF information. */ |
| if (fde |
| && fde->stack_realign |
| && REGNO (src) == STACK_POINTER_REGNUM) |
| { |
| gcc_assert (REGNO (dest) == HARD_FRAME_POINTER_REGNUM |
| && fde->drap_reg != INVALID_REGNUM |
| && cur_cfa->reg != src |
| && fde->rule18); |
| fde->rule18 = 0; |
| /* The save of hard frame pointer has been deferred |
| until this point when Rule 18 applied. Emit it now. */ |
| queue_reg_save (dest, NULL_RTX, 0); |
| /* And as the instruction modifies the hard frame pointer, |
| flush the queue as well. */ |
| dwarf2out_flush_queued_reg_saves (); |
| } |
| else |
| queue_reg_save (src, dest, 0); |
| } |
| break; |
| |
| case PLUS: |
| case MINUS: |
| case LO_SUM: |
| if (dest == stack_pointer_rtx) |
| { |
| /* Rule 2 */ |
| /* Adjusting SP. */ |
| if (REG_P (XEXP (src, 1))) |
| { |
| gcc_assert (cur_trace->cfa_temp.reg == XEXP (src, 1)); |
| offset = cur_trace->cfa_temp.offset; |
| } |
| else if (!poly_int_rtx_p (XEXP (src, 1), &offset)) |
| gcc_unreachable (); |
| |
| if (XEXP (src, 0) == hard_frame_pointer_rtx) |
| { |
| /* Restoring SP from FP in the epilogue. */ |
| gcc_assert (cur_cfa->reg == dw_frame_pointer_regnum); |
| cur_cfa->reg = dw_stack_pointer_regnum; |
| } |
| else if (GET_CODE (src) == LO_SUM) |
| /* Assume we've set the source reg of the LO_SUM from sp. */ |
| ; |
| else |
| gcc_assert (XEXP (src, 0) == stack_pointer_rtx); |
| |
| if (GET_CODE (src) != MINUS) |
| offset = -offset; |
| if (cur_cfa->reg == dw_stack_pointer_regnum) |
| cur_cfa->offset += offset; |
| if (cur_trace->cfa_store.reg == dw_stack_pointer_regnum) |
| cur_trace->cfa_store.offset += offset; |
| } |
| else if (dest == hard_frame_pointer_rtx) |
| { |
| /* Rule 3 */ |
| /* Either setting the FP from an offset of the SP, |
| or adjusting the FP */ |
| gcc_assert (frame_pointer_needed); |
| |
| gcc_assert (REG_P (XEXP (src, 0)) |
| && cur_cfa->reg == XEXP (src, 0)); |
| offset = rtx_to_poly_int64 (XEXP (src, 1)); |
| if (GET_CODE (src) != MINUS) |
| offset = -offset; |
| cur_cfa->offset += offset; |
| cur_cfa->reg = dw_frame_pointer_regnum; |
| } |
| else |
| { |
| gcc_assert (GET_CODE (src) != MINUS); |
| |
| /* Rule 4 */ |
| if (REG_P (XEXP (src, 0)) |
| && cur_cfa->reg == XEXP (src, 0) |
| && poly_int_rtx_p (XEXP (src, 1), &offset)) |
| { |
| /* Setting a temporary CFA register that will be copied |
| into the FP later on. */ |
| offset = -offset; |
| cur_cfa->offset += offset; |
| cur_cfa->reg = dwf_cfa_reg (dest); |
| /* Or used to save regs to the stack. */ |
| cur_trace->cfa_temp.reg = cur_cfa->reg; |
| cur_trace->cfa_temp.offset = cur_cfa->offset; |
| } |
| |
| /* Rule 5 */ |
| else if (REG_P (XEXP (src, 0)) |
| && cur_trace->cfa_temp.reg == XEXP (src, 0) |
| && XEXP (src, 1) == stack_pointer_rtx) |
| { |
| /* Setting a scratch register that we will use instead |
| of SP for saving registers to the stack. */ |
| gcc_assert (cur_cfa->reg == dw_stack_pointer_regnum); |
| cur_trace->cfa_store.reg = dwf_cfa_reg (dest); |
| cur_trace->cfa_store.offset |
| = cur_cfa->offset - cur_trace->cfa_temp.offset; |
| } |
| |
| /* Rule 9 */ |
| else if (GET_CODE (src) == LO_SUM |
| && poly_int_rtx_p (XEXP (src, 1), |
| &cur_trace->cfa_temp.offset)) |
| cur_trace->cfa_temp.reg = dwf_cfa_reg (dest); |
| else |
| gcc_unreachable (); |
| } |
| break; |
| |
| /* Rule 6 */ |
| case CONST_INT: |
| case CONST_POLY_INT: |
| cur_trace->cfa_temp.reg = dwf_cfa_reg (dest); |
| cur_trace->cfa_temp.offset = rtx_to_poly_int64 (src); |
| break; |
| |
| /* Rule 7 */ |
| case IOR: |
| gcc_assert (REG_P (XEXP (src, 0)) |
| && cur_trace->cfa_temp.reg == XEXP (src, 0) |
| && CONST_INT_P (XEXP (src, 1))); |
| |
| cur_trace->cfa_temp.reg = dwf_cfa_reg (dest); |
| if (!can_ior_p (cur_trace->cfa_temp.offset, INTVAL (XEXP (src, 1)), |
| &cur_trace->cfa_temp.offset)) |
| /* The target shouldn't generate this kind of CFI note if we |
| can't represent it. */ |
| gcc_unreachable (); |
| break; |
| |
| /* Skip over HIGH, assuming it will be followed by a LO_SUM, |
| which will fill in all of the bits. */ |
| /* Rule 8 */ |
| case HIGH: |
| break; |
| |
| /* Rule 15 */ |
| case UNSPEC: |
| case UNSPEC_VOLATILE: |
| /* All unspecs should be represented by REG_CFA_* notes. */ |
| gcc_unreachable (); |
| return; |
| |
| /* Rule 16 */ |
| case AND: |
| /* If this AND operation happens on stack pointer in prologue, |
| we assume the stack is realigned and we extract the |
| alignment. */ |
| if (fde && XEXP (src, 0) == stack_pointer_rtx) |
| { |
| /* We interpret reg_save differently with stack_realign set. |
| Thus we must flush whatever we have queued first. */ |
| dwarf2out_flush_queued_reg_saves (); |
| |
| gcc_assert (cur_trace->cfa_store.reg |
| == XEXP (src, 0)); |
| fde->stack_realign = 1; |
| fde->stack_realignment = INTVAL (XEXP (src, 1)); |
| cur_trace->cfa_store.offset = 0; |
| |
| if (cur_cfa->reg != dw_stack_pointer_regnum |
| && cur_cfa->reg != dw_frame_pointer_regnum) |
| { |
| gcc_assert (cur_cfa->reg.span == 1); |
| fde->drap_reg = cur_cfa->reg.reg; |
| } |
| } |
| return; |
| |
| default: |
| gcc_unreachable (); |
| } |
| break; |
| |
| case MEM: |
| |
| /* Saving a register to the stack. Make sure dest is relative to the |
| CFA register. */ |
| switch (GET_CODE (XEXP (dest, 0))) |
| { |
| /* Rule 10 */ |
| /* With a push. */ |
| case PRE_MODIFY: |
| case POST_MODIFY: |
| /* We can't handle variable size modifications. */ |
| offset = -rtx_to_poly_int64 (XEXP (XEXP (XEXP (dest, 0), 1), 1)); |
| |
| gcc_assert (REGNO (XEXP (XEXP (dest, 0), 0)) == STACK_POINTER_REGNUM |
| && cur_trace->cfa_store.reg == dw_stack_pointer_regnum); |
| |
| cur_trace->cfa_store.offset += offset; |
| if (cur_cfa->reg == dw_stack_pointer_regnum) |
| cur_cfa->offset = cur_trace->cfa_store.offset; |
| |
| if (GET_CODE (XEXP (dest, 0)) == POST_MODIFY) |
| offset -= cur_trace->cfa_store.offset; |
| else |
| offset = -cur_trace->cfa_store.offset; |
| break; |
| |
| /* Rule 11 */ |
| case PRE_INC: |
| case PRE_DEC: |
| case POST_DEC: |
| offset = GET_MODE_SIZE (GET_MODE (dest)); |
| if (GET_CODE (XEXP (dest, 0)) == PRE_INC) |
| offset = -offset; |
| |
| gcc_assert ((REGNO (XEXP (XEXP (dest, 0), 0)) |
| == STACK_POINTER_REGNUM) |
| && cur_trace->cfa_store.reg == dw_stack_pointer_regnum); |
| |
| cur_trace->cfa_store.offset += offset; |
| |
| /* Rule 18: If stack is aligned, we will use FP as a |
| reference to represent the address of the stored |
| regiser. */ |
| if (fde |
| && fde->stack_realign |
| && REG_P (src) |
| && REGNO (src) == HARD_FRAME_POINTER_REGNUM) |
| { |
| gcc_assert (cur_cfa->reg != dw_frame_pointer_regnum); |
| cur_trace->cfa_store.offset = 0; |
| fde->rule18 = 1; |
| } |
| |
| if (cur_cfa->reg == dw_stack_pointer_regnum) |
| cur_cfa->offset = cur_trace->cfa_store.offset; |
| |
| if (GET_CODE (XEXP (dest, 0)) == POST_DEC) |
| offset += -cur_trace->cfa_store.offset; |
| else |
| offset = -cur_trace->cfa_store.offset; |
| break; |
| |
| /* Rule 12 */ |
| /* With an offset. */ |
| case PLUS: |
| case MINUS: |
| case LO_SUM: |
| { |
| struct cfa_reg regno; |
| |
| gcc_assert (REG_P (XEXP (XEXP (dest, 0), 0))); |
| offset = rtx_to_poly_int64 (XEXP (XEXP (dest, 0), 1)); |
| if (GET_CODE (XEXP (dest, 0)) == MINUS) |
| offset = -offset; |
| |
| regno = dwf_cfa_reg (XEXP (XEXP (dest, 0), 0)); |
| |
| if (cur_cfa->reg == regno) |
| offset -= cur_cfa->offset; |
| else if (cur_trace->cfa_store.reg == regno) |
| offset -= cur_trace->cfa_store.offset; |
| else |
| { |
| gcc_assert (cur_trace->cfa_temp.reg == regno); |
| offset -= cur_trace->cfa_temp.offset; |
| } |
| } |
| break; |
| |
| /* Rule 13 */ |
| /* Without an offset. */ |
| case REG: |
| { |
| struct cfa_reg regno = dwf_cfa_reg (XEXP (dest, 0)); |
| |
| if (cur_cfa->reg == regno) |
| offset = -cur_cfa->offset; |
| else if (cur_trace->cfa_store.reg == regno) |
| offset = -cur_trace->cfa_store.offset; |
| else |
| { |
| gcc_assert (cur_trace->cfa_temp.reg == regno); |
| offset = -cur_trace->cfa_temp.offset; |
| } |
| } |
| break; |
| |
| /* Rule 14 */ |
| case POST_INC: |
| gcc_assert (cur_trace->cfa_temp.reg == XEXP (XEXP (dest, 0), 0)); |
| offset = -cur_trace->cfa_temp.offset; |
| cur_trace->cfa_temp.offset -= GET_MODE_SIZE (GET_MODE (dest)); |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| /* Rule 17 */ |
| /* If the source operand of this MEM operation is a memory, |
| we only care how much stack grew. */ |
| if (MEM_P (src)) |
| break; |
| |
| if (REG_P (src) |
| && REGNO (src) != STACK_POINTER_REGNUM |
| && REGNO (src) != HARD_FRAME_POINTER_REGNUM |
| && cur_cfa->reg == src) |
| { |
| /* We're storing the current CFA reg into the stack. */ |
| |
| if (known_eq (cur_cfa->offset, 0)) |
| { |
| /* Rule 19 */ |
| /* If stack is aligned, putting CFA reg into stack means |
| we can no longer use reg + offset to represent CFA. |
| Here we use DW_CFA_def_cfa_expression instead. The |
| result of this expression equals to the original CFA |
| value. */ |
| if (fde |
| && fde->stack_realign |
| && cur_cfa->indirect == 0 |
| && cur_cfa->reg != dw_frame_pointer_regnum) |
| { |
| gcc_assert (fde->drap_reg == cur_cfa->reg.reg); |
| |
| cur_cfa->indirect = 1; |
| cur_cfa->reg = dw_frame_pointer_regnum; |
| cur_cfa->base_offset = offset; |
| cur_cfa->offset = 0; |
| |
| fde->drap_reg_saved = 1; |
| break; |
| } |
| |
| /* If the source register is exactly the CFA, assume |
| we're saving SP like any other register; this happens |
| on the ARM. */ |
| queue_reg_save (stack_pointer_rtx, NULL_RTX, offset); |
| break; |
| } |
| else |
| { |
| /* Otherwise, we'll need to look in the stack to |
| calculate the CFA. */ |
| rtx x = XEXP (dest, 0); |
| |
| if (!REG_P (x)) |
| x = XEXP (x, 0); |
| gcc_assert (REG_P (x)); |
| |
| cur_cfa->reg = dwf_cfa_reg (x); |
| cur_cfa->base_offset = offset; |
| cur_cfa->indirect = 1; |
| break; |
| } |
| } |
| |
| if (REG_P (src)) |
| span = targetm.dwarf_register_span (src); |
| else |
| span = NULL; |
| |
| if (!span) |
| { |
| if (fde->rule18) |
| /* Just verify the hard frame pointer save when doing dynamic |
| realignment uses expected offset. The actual queue_reg_save |
| needs to be deferred until the instruction that sets |
| hard frame pointer to stack pointer, see PR99334 for |
| details. */ |
| gcc_assert (known_eq (offset, 0)); |
| else |
| queue_reg_save (src, NULL_RTX, offset); |
| } |
| else |
| { |
| /* We have a PARALLEL describing where the contents of SRC live. |
| Queue register saves for each piece of the PARALLEL. */ |
| poly_int64 span_offset = offset; |
| |
| gcc_assert (GET_CODE (span) == PARALLEL); |
| |
| const int par_len = XVECLEN (span, 0); |
| for (int par_index = 0; par_index < par_len; par_index++) |
| { |
| rtx elem = XVECEXP (span, 0, par_index); |
| queue_reg_save (elem, NULL_RTX, span_offset); |
| span_offset += GET_MODE_SIZE (GET_MODE (elem)); |
| } |
| } |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| } |
| |
| /* Record call frame debugging information for INSN, which either sets |
| SP or FP (adjusting how we calculate the frame address) or saves a |
| register to the stack. */ |
| |
| static void |
| dwarf2out_frame_debug (rtx_insn *insn) |
| { |
| rtx note, n, pat; |
| bool handled_one = false; |
| |
| for (note = REG_NOTES (insn); note; note = XEXP (note, 1)) |
| switch (REG_NOTE_KIND (note)) |
| { |
| case REG_FRAME_RELATED_EXPR: |
| pat = XEXP (note, 0); |
| goto do_frame_expr; |
| |
| case REG_CFA_DEF_CFA: |
| dwarf2out_frame_debug_def_cfa (XEXP (note, 0)); |
| handled_one = true; |
| break; |
| |
| case REG_CFA_ADJUST_CFA: |
| n = XEXP (note, 0); |
| if (n == NULL) |
| { |
| n = PATTERN (insn); |
| if (GET_CODE (n) == PARALLEL) |
| n = XVECEXP (n, 0, 0); |
| } |
| dwarf2out_frame_debug_adjust_cfa (n); |
| handled_one = true; |
| break; |
| |
| case REG_CFA_OFFSET: |
| n = XEXP (note, 0); |
| if (n == NULL) |
| n = single_set (insn); |
| dwarf2out_frame_debug_cfa_offset (n); |
| handled_one = true; |
| break; |
| |
| case REG_CFA_REGISTER: |
| n = XEXP (note, 0); |
| if (n == NULL) |
| { |
| n = PATTERN (insn); |
| if (GET_CODE (n) == PARALLEL) |
| n = XVECEXP (n, 0, 0); |
| } |
| dwarf2out_frame_debug_cfa_register (n); |
| handled_one = true; |
| break; |
| |
| case REG_CFA_EXPRESSION: |
| case REG_CFA_VAL_EXPRESSION: |
| n = XEXP (note, 0); |
| if (n == NULL) |
| n = single_set (insn); |
| |
| if (REG_NOTE_KIND (note) == REG_CFA_EXPRESSION) |
| dwarf2out_frame_debug_cfa_expression (n); |
| else |
| dwarf2out_frame_debug_cfa_val_expression (n); |
| |
| handled_one = true; |
| break; |
| |
| case REG_CFA_RESTORE: |
| n = XEXP (note, 0); |
| if (n == NULL) |
| { |
| n = PATTERN (insn); |
| if (GET_CODE (n) == PARALLEL) |
| n = XVECEXP (n, 0, 0); |
| n = XEXP (n, 0); |
| } |
| dwarf2out_frame_debug_cfa_restore (n); |
| handled_one = true; |
| break; |
| |
| case REG_CFA_SET_VDRAP: |
| n = XEXP (note, 0); |
| if (REG_P (n)) |
| { |
| dw_fde_ref fde = cfun->fde; |
| if (fde) |
| { |
| gcc_assert (fde->vdrap_reg == INVALID_REGNUM); |
| if (REG_P (n)) |
| fde->vdrap_reg = dwf_regno (n); |
| } |
| } |
| handled_one = true; |
| break; |
| |
| case REG_CFA_TOGGLE_RA_MANGLE: |
| dwarf2out_frame_debug_cfa_toggle_ra_mangle (); |
| handled_one = true; |
| break; |
| |
| case REG_CFA_WINDOW_SAVE: |
| dwarf2out_frame_debug_cfa_window_save (); |
| handled_one = true; |
| break; |
| |
| case REG_CFA_FLUSH_QUEUE: |
| /* The actual flush happens elsewhere. */ |
| handled_one = true; |
| break; |
| |
| default: |
| break; |
| } |
| |
| if (!handled_one) |
| { |
| pat = PATTERN (insn); |
| do_frame_expr: |
| dwarf2out_frame_debug_expr (pat); |
| |
| /* Check again. A parallel can save and update the same register. |
| We could probably check just once, here, but this is safer than |
| removing the check at the start of the function. */ |
| if (clobbers_queued_reg_save (pat)) |
| dwarf2out_flush_queued_reg_saves (); |
| } |
| } |
| |
| /* Emit CFI info to change the state from OLD_ROW to NEW_ROW. */ |
| |
| static void |
| change_cfi_row (dw_cfi_row *old_row, dw_cfi_row *new_row) |
| { |
| size_t i, n_old, n_new, n_max; |
| dw_cfi_ref cfi; |
| |
| if (new_row->cfa_cfi && !cfi_equal_p (old_row->cfa_cfi, new_row->cfa_cfi)) |
| add_cfi (new_row->cfa_cfi); |
| else |
| { |
| cfi = def_cfa_0 (&old_row->cfa, &new_row->cfa); |
| if (cfi) |
| add_cfi (cfi); |
| } |
| |
| n_old = vec_safe_length (old_row->reg_save); |
| n_new = vec_safe_length (new_row->reg_save); |
| n_max = MAX (n_old, n_new); |
| |
| for (i = 0; i < n_max; ++i) |
| { |
| dw_cfi_ref r_old = NULL, r_new = NULL; |
| |
| if (i < n_old) |
| r_old = (*old_row->reg_save)[i]; |
| if (i < n_new) |
| r_new = (*new_row->reg_save)[i]; |
| |
| if (r_old == r_new) |
| ; |
| else if (r_new == NULL) |
| add_cfi_restore (i); |
| else if (!cfi_equal_p (r_old, r_new)) |
| add_cfi (r_new); |
| } |
| |
| if (!old_row->window_save && new_row->window_save) |
| { |
| dw_cfi_ref cfi = new_cfi (); |
| |
| gcc_assert (!old_row->ra_mangled && !new_row->ra_mangled); |
| cfi->dw_cfi_opc = DW_CFA_GNU_window_save; |
| add_cfi (cfi); |
| } |
| |
| if (old_row->ra_mangled != new_row->ra_mangled) |
| { |
| dw_cfi_ref cfi = new_cfi (); |
| |
| gcc_assert (!old_row->window_save && !new_row->window_save); |
| /* DW_CFA_GNU_window_save is reused for toggling RA mangle state. */ |
| cfi->dw_cfi_opc = DW_CFA_GNU_window_save; |
| add_cfi (cfi); |
| } |
| } |
| |
| /* Examine CFI and return true if a cfi label and set_loc is needed |
| beforehand. Even when generating CFI assembler instructions, we |
| still have to add the cfi to the list so that lookup_cfa_1 works |
| later on. When -g2 and above we even need to force emitting of |
| CFI labels and add to list a DW_CFA_set_loc for convert_cfa_to_fb_loc_list |
| purposes. If we're generating DWARF3 output we use DW_OP_call_frame_cfa |
| and so don't use convert_cfa_to_fb_loc_list. */ |
| |
| static bool |
| cfi_label_required_p (dw_cfi_ref cfi) |
| { |
| if (!dwarf2out_do_cfi_asm ()) |
| return true; |
| |
| if (dwarf_version == 2 |
| && debug_info_level > DINFO_LEVEL_TERSE |
| && dwarf_debuginfo_p ()) |
| { |
| switch (cfi->dw_cfi_opc) |
| { |
| case DW_CFA_def_cfa_offset: |
| case DW_CFA_def_cfa_offset_sf: |
| case DW_CFA_def_cfa_register: |
| case DW_CFA_def_cfa: |
| case DW_CFA_def_cfa_sf: |
| case DW_CFA_def_cfa_expression: |
| case DW_CFA_restore_state: |
| return true; |
| default: |
| return false; |
| } |
| } |
| return false; |
| } |
| |
| /* Walk the function, looking for NOTE_INSN_CFI notes. Add the CFIs to the |
| function's FDE, adding CFI labels and set_loc/advance_loc opcodes as |
| necessary. */ |
| static void |
| add_cfis_to_fde (void) |
| { |
| dw_fde_ref fde = cfun->fde; |
| rtx_insn *insn, *next; |
| |
| for (insn = get_insns (); insn; insn = next) |
| { |
| next = NEXT_INSN (insn); |
| |
| if (NOTE_P (insn) && NOTE_KIND (insn) == NOTE_INSN_SWITCH_TEXT_SECTIONS) |
| fde->dw_fde_switch_cfi_index = vec_safe_length (fde->dw_fde_cfi); |
| |
| if (NOTE_P (insn) && NOTE_KIND (insn) == NOTE_INSN_CFI) |
| { |
| bool required = cfi_label_required_p (NOTE_CFI (insn)); |
| while (next) |
| if (NOTE_P (next) && NOTE_KIND (next) == NOTE_INSN_CFI) |
| { |
| required |= cfi_label_required_p (NOTE_CFI (next)); |
| next = NEXT_INSN (next); |
| } |
| else if (active_insn_p (next) |
| || (NOTE_P (next) && (NOTE_KIND (next) |
| == NOTE_INSN_SWITCH_TEXT_SECTIONS))) |
| break; |
| else |
| next = NEXT_INSN (next); |
| if (required) |
| { |
| int num = dwarf2out_cfi_label_num; |
| const char *label = dwarf2out_cfi_label (); |
| dw_cfi_ref xcfi; |
| |
| /* Set the location counter to the new label. */ |
| xcfi = new_cfi (); |
| xcfi->dw_cfi_opc = DW_CFA_advance_loc4; |
| xcfi->dw_cfi_oprnd1.dw_cfi_addr = label; |
| vec_safe_push (fde->dw_fde_cfi, xcfi); |
| |
| rtx_note *tmp = emit_note_before (NOTE_INSN_CFI_LABEL, insn); |
| NOTE_LABEL_NUMBER (tmp) = num; |
| } |
| |
| do |
| { |
| if (NOTE_P (insn) && NOTE_KIND (insn) == NOTE_INSN_CFI) |
| vec_safe_push (fde->dw_fde_cfi, NOTE_CFI (insn)); |
| insn = NEXT_INSN (insn); |
| } |
| while (insn != next); |
| } |
| } |
| } |
| |
| static void dump_cfi_row (FILE *f, dw_cfi_row *row); |
| |
| /* If LABEL is the start of a trace, then initialize the state of that |
| trace from CUR_TRACE and CUR_ROW. */ |
| |
| static void |
| maybe_record_trace_start (rtx_insn *start, rtx_insn *origin) |
| { |
| dw_trace_info *ti; |
| |
| ti = get_trace_info (start); |
| gcc_assert (ti != NULL); |
| |
| if (dump_file) |
| { |
| fprintf (dump_file, " saw edge from trace %u to %u (via %s %d)\n", |
| cur_trace->id, ti->id, |
| (origin ? rtx_name[(int) GET_CODE (origin)] : "fallthru"), |
| (origin ? INSN_UID (origin) : 0)); |
| } |
| |
| poly_int64 args_size = cur_trace->end_true_args_size; |
| if (ti->beg_row == NULL) |
| { |
| /* This is the first time we've encountered this trace. Propagate |
| state across the edge and push the trace onto the work list. */ |
| ti->beg_row = copy_cfi_row (cur_row); |
| ti->beg_true_args_size = args_size; |
| |
| ti->cfa_store = cur_trace->cfa_store; |
| ti->cfa_temp = cur_trace->cfa_temp; |
| ti->regs_saved_in_regs = cur_trace->regs_saved_in_regs.copy (); |
| |
| trace_work_list.safe_push (ti); |
| |
| if (dump_file) |
| fprintf (dump_file, "\tpush trace %u to worklist\n", ti->id); |
| } |
| else |
| { |
| |
| /* We ought to have the same state incoming to a given trace no |
| matter how we arrive at the trace. Anything else means we've |
| got some kind of optimization error. */ |
| #if CHECKING_P |
| if (!cfi_row_equal_p (cur_row, ti->beg_row)) |
| { |
| if (dump_file) |
| { |
| fprintf (dump_file, "Inconsistent CFI state!\n"); |
| fprintf (dump_file, "SHOULD have:\n"); |
| dump_cfi_row (dump_file, ti->beg_row); |
| fprintf (dump_file, "DO have:\n"); |
| dump_cfi_row (dump_file, cur_row); |
| } |
| |
| gcc_unreachable (); |
| } |
| #endif |
| |
| /* The args_size is allowed to conflict if it isn't actually used. */ |
| if (maybe_ne (ti->beg_true_args_size, args_size)) |
| ti->args_size_undefined = true; |
| } |
| } |
| |
| /* Similarly, but handle the args_size and CFA reset across EH |
| and non-local goto edges. */ |
| |
| static void |
| maybe_record_trace_start_abnormal (rtx_insn *start, rtx_insn *origin) |
| { |
| poly_int64 save_args_size, delta; |
| dw_cfa_location save_cfa; |
| |
| save_args_size = cur_trace->end_true_args_size; |
| if (known_eq (save_args_size, 0)) |
| { |
| maybe_record_trace_start (start, origin); |
| return; |
| } |
| |
| delta = -save_args_size; |
| cur_trace->end_true_args_size = 0; |
| |
| save_cfa = cur_row->cfa; |
| if (cur_row->cfa.reg == dw_stack_pointer_regnum) |
| { |
| /* Convert a change in args_size (always a positive in the |
| direction of stack growth) to a change in stack pointer. */ |
| if (!STACK_GROWS_DOWNWARD) |
| delta = -delta; |
| |
| cur_row->cfa.offset += delta; |
| } |
| |
| maybe_record_trace_start (start, origin); |
| |
| cur_trace->end_true_args_size = save_args_size; |
| cur_row->cfa = save_cfa; |
| } |
| |
| /* Propagate CUR_TRACE state to the destinations implied by INSN. */ |
| /* ??? Sadly, this is in large part a duplicate of make_edges. */ |
| |
| static void |
| create_trace_edges (rtx_insn *insn) |
| { |
| rtx tmp; |
| int i, n; |
| |
| if (JUMP_P (insn)) |
| { |
| rtx_jump_table_data *table; |
| |
| if (find_reg_note (insn, REG_NON_LOCAL_GOTO, NULL_RTX)) |
| return; |
| |
| if (tablejump_p (insn, NULL, &table)) |
| { |
| rtvec vec = table->get_labels (); |
| |
| n = GET_NUM_ELEM (vec); |
| for (i = 0; i < n; ++i) |
| { |
| rtx_insn *lab = as_a <rtx_insn *> (XEXP (RTVEC_ELT (vec, i), 0)); |
| maybe_record_trace_start (lab, insn); |
| } |
| |
| /* Handle casesi dispatch insns. */ |
| if ((tmp = tablejump_casesi_pattern (insn)) != NULL_RTX) |
| { |
| rtx_insn * lab = label_ref_label (XEXP (SET_SRC (tmp), 2)); |
| maybe_record_trace_start (lab, insn); |
| } |
| } |
| else if (computed_jump_p (insn)) |
| { |
| rtx_insn *temp; |
| unsigned int i; |
| FOR_EACH_VEC_SAFE_ELT (forced_labels, i, temp) |
| maybe_record_trace_start (temp, insn); |
| } |
| else if (returnjump_p (insn)) |
| ; |
| else if ((tmp = extract_asm_operands (PATTERN (insn))) != NULL) |
| { |
| n = ASM_OPERANDS_LABEL_LENGTH (tmp); |
| for (i = 0; i < n; ++i) |
| { |
| rtx_insn *lab = |
| as_a <rtx_insn *> (XEXP (ASM_OPERANDS_LABEL (tmp, i), 0)); |
| maybe_record_trace_start (lab, insn); |
| } |
| } |
| else |
| { |
| rtx_insn *lab = JUMP_LABEL_AS_INSN (insn); |
| gcc_assert (lab != NULL); |
| maybe_record_trace_start (lab, insn); |
| } |
| } |
| else if (CALL_P (insn)) |
| { |
| /* Sibling calls don't have edges inside this function. */ |
| if (SIBLING_CALL_P (insn)) |
| return; |
| |
| /* Process non-local goto edges. */ |
| if (can_nonlocal_goto (insn)) |
| for (rtx_insn_list *lab = nonlocal_goto_handler_labels; |
| lab; |
| lab = lab->next ()) |
| maybe_record_trace_start_abnormal (lab->insn (), insn); |
| } |
| else if (rtx_sequence *seq = dyn_cast <rtx_sequence *> (PATTERN (insn))) |
| { |
| int i, n = seq->len (); |
| for (i = 0; i < n; ++i) |
| create_trace_edges (seq->insn (i)); |
| return; |
| } |
| |
| /* Process EH edges. */ |
| if (CALL_P (insn) || cfun->can_throw_non_call_exceptions) |
| { |
| eh_landing_pad lp = get_eh_landing_pad_from_rtx (insn); |
| if (lp) |
| maybe_record_trace_start_abnormal (lp->landing_pad, insn); |
| } |
| } |
| |
| /* A subroutine of scan_trace. Do what needs to be done "after" INSN. */ |
| |
| static void |
| scan_insn_after (rtx_insn *insn) |
| { |
| if (RTX_FRAME_RELATED_P (insn)) |
| dwarf2out_frame_debug (insn); |
| notice_args_size (insn); |
| } |
| |
| /* Scan the trace beginning at INSN and create the CFI notes for the |
| instructions therein. */ |
| |
| static void |
| scan_trace (dw_trace_info *trace, bool entry) |
| { |
| rtx_insn *prev, *insn = trace->head; |
| dw_cfa_location this_cfa; |
| |
| if (dump_file) |
| fprintf (dump_file, "Processing trace %u : start at %s %d\n", |
| trace->id, rtx_name[(int) GET_CODE (insn)], |
| INSN_UID (insn)); |
| |
| trace->end_row = copy_cfi_row (trace->beg_row); |
| trace->end_true_args_size = trace->beg_true_args_size; |
| |
| cur_trace = trace; |
| cur_row = trace->end_row; |
| |
| this_cfa = cur_row->cfa; |
| cur_cfa = &this_cfa; |
| |
| /* If the current function starts with a non-standard incoming frame |
| sp offset, emit a note before the first instruction. */ |
| if (entry |
| && DEFAULT_INCOMING_FRAME_SP_OFFSET != INCOMING_FRAME_SP_OFFSET) |
| { |
| add_cfi_insn = insn; |
| gcc_assert (NOTE_P (insn) && NOTE_KIND (insn) == NOTE_INSN_DELETED); |
| this_cfa.offset = INCOMING_FRAME_SP_OFFSET; |
| def_cfa_1 (&this_cfa); |
| } |
| |
| for (prev = insn, insn = NEXT_INSN (insn); |
| insn; |
| prev = insn, insn = NEXT_INSN (insn)) |
| { |
| rtx_insn *control; |
| |
| /* Do everything that happens "before" the insn. */ |
| add_cfi_insn = prev; |
| |
| /* Notice the end of a trace. */ |
| if (BARRIER_P (insn)) |
| { |
| /* Don't bother saving the unneeded queued registers at all. */ |
| queued_reg_saves.truncate (0); |
| break; |
| } |
| if (save_point_p (insn)) |
| { |
| /* Propagate across fallthru edges. */ |
| dwarf2out_flush_queued_reg_saves (); |
| maybe_record_trace_start (insn, NULL); |
| break; |
| } |
| |
| if (DEBUG_INSN_P (insn) || !inside_basic_block_p (insn)) |
| continue; |
| |
| /* Handle all changes to the row state. Sequences require special |
| handling for the positioning of the notes. */ |
| if (rtx_sequence *pat = dyn_cast <rtx_sequence *> (PATTERN (insn))) |
| { |
| rtx_insn *elt; |
| int i, n = pat->len (); |
| |
| control = pat->insn (0); |
| if (can_throw_internal (control)) |
| notice_eh_throw (control); |
| dwarf2out_flush_queued_reg_saves (); |
| |
| if (JUMP_P (control) && INSN_ANNULLED_BRANCH_P (control)) |
| { |
| /* ??? Hopefully multiple delay slots are not annulled. */ |
| gcc_assert (n == 2); |
| gcc_assert (!RTX_FRAME_RELATED_P (control)); |
| gcc_assert (!find_reg_note (control, REG_ARGS_SIZE, NULL)); |
| |
| elt = pat->insn (1); |
| |
| if (INSN_FROM_TARGET_P (elt)) |
| { |
| cfi_vec save_row_reg_save; |
| |
| /* If ELT is an instruction from target of an annulled |
| branch, the effects are for the target only and so |
| the args_size and CFA along the current path |
| shouldn't change. */ |
| add_cfi_insn = NULL; |
| poly_int64 restore_args_size = cur_trace->end_true_args_size; |
| cur_cfa = &cur_row->cfa; |
| save_row_reg_save = vec_safe_copy (cur_row->reg_save); |
| |
| scan_insn_after (elt); |
| |
| /* ??? Should we instead save the entire row state? */ |
| gcc_assert (!queued_reg_saves.length ()); |
| |
| create_trace_edges (control); |
| |
| cur_trace->end_true_args_size = restore_args_size; |
| cur_row->cfa = this_cfa; |
| cur_row->reg_save = save_row_reg_save; |
| cur_cfa = &this_cfa; |
| } |
| else |
| { |
| /* If ELT is a annulled branch-taken instruction (i.e. |
| executed only when branch is not taken), the args_size |
| and CFA should not change through the jump. */ |
| create_trace_edges (control); |
| |
| /* Update and continue with the trace. */ |
| add_cfi_insn = insn; |
| scan_insn_after (elt); |
| def_cfa_1 (&this_cfa); |
| } |
| continue; |
| } |
| |
| /* The insns in the delay slot should all be considered to happen |
| "before" a call insn. Consider a call with a stack pointer |
| adjustment in the delay slot. The backtrace from the callee |
| should include the sp adjustment. Unfortunately, that leaves |
| us with an unavoidable unwinding error exactly at the call insn |
| itself. For jump insns we'd prefer to avoid this error by |
| placing the notes after the sequence. */ |
| if (JUMP_P (control)) |
| add_cfi_insn = insn; |
| |
| for (i = 1; i < n; ++i) |
| { |
| elt = pat->insn (i); |
| scan_insn_after (elt); |
| } |
| |
| /* Make sure any register saves are visible at the jump target. */ |
| dwarf2out_flush_queued_reg_saves (); |
| any_cfis_emitted = false; |
| |
| /* However, if there is some adjustment on the call itself, e.g. |
| a call_pop, that action should be considered to happen after |
| the call returns. */ |
| add_cfi_insn = insn; |
| scan_insn_after (control); |
| } |
| else |
| { |
| /* Flush data before calls and jumps, and of course if necessary. */ |
| if (can_throw_internal (insn)) |
| { |
| notice_eh_throw (insn); |
| dwarf2out_flush_queued_reg_saves (); |
| } |
| else if (!NONJUMP_INSN_P (insn) |
| || clobbers_queued_reg_save (insn) |
| || find_reg_note (insn, REG_CFA_FLUSH_QUEUE, NULL)) |
| dwarf2out_flush_queued_reg_saves (); |
| any_cfis_emitted = false; |
| |
| add_cfi_insn = insn; |
| scan_insn_after (insn); |
| control = insn; |
| } |
| |
| /* Between frame-related-p and args_size we might have otherwise |
| emitted two cfa adjustments. Do it now. */ |
| def_cfa_1 (&this_cfa); |
| |
| /* Minimize the number of advances by emitting the entire queue |
| once anything is emitted. */ |
| if (any_cfis_emitted |
| || find_reg_note (insn, REG_CFA_FLUSH_QUEUE, NULL)) |
| dwarf2out_flush_queued_reg_saves (); |
| |
| /* Note that a test for control_flow_insn_p does exactly the |
| same tests as are done to actually create the edges. So |
| always call the routine and let it not create edges for |
| non-control-flow insns. */ |
| create_trace_edges (control); |
| } |
| |
| gcc_assert (!cfun->fde || !cfun->fde->rule18); |
| add_cfi_insn = NULL; |
| cur_row = NULL; |
| cur_trace = NULL; |
| cur_cfa = NULL; |
| } |
| |
| /* Scan the function and create the initial set of CFI notes. */ |
| |
| static void |
| create_cfi_notes (void) |
| { |
| dw_trace_info *ti; |
| |
| gcc_checking_assert (!queued_reg_saves.exists ()); |
| gcc_checking_assert (!trace_work_list.exists ()); |
| |
| /* Always begin at the entry trace. */ |
| ti = &trace_info[0]; |
| scan_trace (ti, true); |
| |
| while (!trace_work_list.is_empty ()) |
| { |
| ti = trace_work_list.pop (); |
| scan_trace (ti, false); |
| } |
| |
| queued_reg_saves.release (); |
| trace_work_list.release (); |
| } |
| |
| /* Return the insn before the first NOTE_INSN_CFI after START. */ |
| |
| static rtx_insn * |
| before_next_cfi_note (rtx_insn *start) |
| { |
| rtx_insn *prev = start; |
| while (start) |
| { |
| if (NOTE_P (start) && NOTE_KIND (start) == NOTE_INSN_CFI) |
| return prev; |
| prev = start; |
| start = NEXT_INSN (start); |
| } |
| gcc_unreachable (); |
| } |
| |
| /* Insert CFI notes between traces to properly change state between them. */ |
| |
| static void |
| connect_traces (void) |
| { |
| unsigned i, n; |
| dw_trace_info *prev_ti, *ti; |
| |
| /* ??? Ideally, we should have both queued and processed every trace. |
| However the current representation of constant pools on various targets |
| is indistinguishable from unreachable code. Assume for the moment that |
| we can simply skip over such traces. */ |
| /* ??? Consider creating a DATA_INSN rtx code to indicate that |
| these are not "real" instructions, and should not be considered. |
| This could be generically useful for tablejump data as well. */ |
| /* Remove all unprocessed traces from the list. */ |
| unsigned ix, ix2; |
| VEC_ORDERED_REMOVE_IF_FROM_TO (trace_info, ix, ix2, ti, 1, |
| trace_info.length (), ti->beg_row == NULL); |
| FOR_EACH_VEC_ELT (trace_info, ix, ti) |
| gcc_assert (ti->end_row != NULL); |
| |
| /* Work from the end back to the beginning. This lets us easily insert |
| remember/restore_state notes in the correct order wrt other notes. */ |
| n = trace_info.length (); |
| prev_ti = &trace_info[n - 1]; |
| for (i = n - 1; i > 0; --i) |
| { |
| dw_cfi_row *old_row; |
| |
| ti = prev_ti; |
| prev_ti = &trace_info[i - 1]; |
| |
| add_cfi_insn = ti->head; |
| |
| /* In dwarf2out_switch_text_section, we'll begin a new FDE |
| for the portion of the function in the alternate text |
| section. The row state at the very beginning of that |
| new FDE will be exactly the row state from the CIE. */ |
| if (ti->switch_sections) |
| old_row = cie_cfi_row; |
| else |
| { |
| old_row = prev_ti->end_row; |
| /* If there's no change from the previous end state, fine. */ |
| if (cfi_row_equal_p (old_row, ti->beg_row)) |
| ; |
| /* Otherwise check for the common case of sharing state with |
| the beginning of an epilogue, but not the end. Insert |
| remember/restore opcodes in that case. */ |
| else if (cfi_row_equal_p (prev_ti->beg_row, ti->beg_row)) |
| { |
| dw_cfi_ref cfi; |
| |
| /* Note that if we blindly insert the remember at the |
| start of the trace, we can wind up increasing the |
| size of the unwind info due to extra advance opcodes. |
| Instead, put the remember immediately before the next |
| state change. We know there must be one, because the |
| state at the beginning and head of the trace differ. */ |
| add_cfi_insn = before_next_cfi_note (prev_ti->head); |
| cfi = new_cfi (); |
| cfi->dw_cfi_opc = DW_CFA_remember_state; |
| add_cfi (cfi); |
| |
| add_cfi_insn = ti->head; |
| cfi = new_cfi (); |
| cfi->dw_cfi_opc = DW_CFA_restore_state; |
| add_cfi (cfi); |
| |
| /* If the target unwinder does not save the CFA as part of the |
| register state, we need to restore it separately. */ |
| if (targetm.asm_out.should_restore_cfa_state () |
| && (cfi = def_cfa_0 (&old_row->cfa, &ti->beg_row->cfa))) |
| add_cfi (cfi); |
| |
| old_row = prev_ti->beg_row; |
| } |
| /* Otherwise, we'll simply change state from the previous end. */ |
| } |
| |
| change_cfi_row (old_row, ti->beg_row); |
| |
| if (dump_file && add_cfi_insn != ti->head) |
| { |
| rtx_insn *note; |
| |
| fprintf (dump_file, "Fixup between trace %u and %u:\n", |
| prev_ti->id, ti->id); |
| |
| note = ti->head; |
| do |
| { |
| note = NEXT_INSN (note); |
| gcc_assert (NOTE_P (note) && NOTE_KIND (note) == NOTE_INSN_CFI); |
| output_cfi_directive (dump_file, NOTE_CFI (note)); |
| } |
| while (note != add_cfi_insn); |
| } |
| } |
| |
| /* Connect args_size between traces that have can_throw_internal insns. */ |
| if (cfun->eh->lp_array) |
| { |
| poly_int64 prev_args_size = 0; |
| |
| for (i = 0; i < n; ++i) |
| { |
| ti = &trace_info[i]; |
| |
| if (ti->switch_sections) |
| prev_args_size = 0; |
| |
| if (ti->eh_head == NULL) |
| continue; |
| |
| /* We require either the incoming args_size values to match or the |
| presence of an insn setting it before the first EH insn. */ |
| gcc_assert (!ti->args_size_undefined || ti->args_size_defined_for_eh); |
| |
| /* In the latter case, we force the creation of a CFI note. */ |
| if (ti->args_size_undefined |
| || maybe_ne (ti->beg_delay_args_size, prev_args_size)) |
| { |
| /* ??? Search back to previous CFI note. */ |
| add_cfi_insn = PREV_INSN (ti->eh_head); |
| add_cfi_args_size (ti->beg_delay_args_size); |
| } |
| |
| prev_args_size = ti->end_delay_args_size; |
| } |
| } |
| } |
| |
| /* Set up the pseudo-cfg of instruction traces, as described at the |
| block comment at the top of the file. */ |
| |
| static void |
| create_pseudo_cfg (void) |
| { |
| bool saw_barrier, switch_sections; |
| dw_trace_info ti; |
| rtx_insn *insn; |
| unsigned i; |
| |
| /* The first trace begins at the start of the function, |
| and begins with the CIE row state. */ |
| trace_info.create (16); |
| memset (&ti, 0, sizeof (ti)); |
| ti.head = get_insns (); |
| ti.beg_row = cie_cfi_row; |
| ti.cfa_store = cie_cfi_row->cfa; |
| ti.cfa_temp.reg.set_by_dwreg (INVALID_REGNUM); |
| trace_info.quick_push (ti); |
| |
| if (cie_return_save) |
| ti.regs_saved_in_regs.safe_push (*cie_return_save); |
| |
| /* Walk all the insns, collecting start of trace locations. */ |
| saw_barrier = false; |
| switch_sections = false; |
| for (insn = get_insns (); insn; insn = NEXT_INSN (insn)) |
| { |
| if (BARRIER_P (insn)) |
| saw_barrier = true; |
| else if (NOTE_P (insn) |
| && NOTE_KIND (insn) == NOTE_INSN_SWITCH_TEXT_SECTIONS) |
| { |
| /* We should have just seen a barrier. */ |
| gcc_assert (saw_barrier); |
| switch_sections = true; |
| } |
| /* Watch out for save_point notes between basic blocks. |
| In particular, a note after a barrier. Do not record these, |
| delaying trace creation until the label. */ |
| else if (save_point_p (insn) |
| && (LABEL_P (insn) || !saw_barrier)) |
| { |
| memset (&ti, 0, sizeof (ti)); |
| ti.head = insn; |
| ti.switch_sections = switch_sections; |
| ti.id = trace_info.length (); |
| trace_info.safe_push (ti); |
| |
| saw_barrier = false; |
| switch_sections = false; |
| } |
| } |
| |
| /* Create the trace index after we've finished building trace_info, |
| avoiding stale pointer problems due to reallocation. */ |
| trace_index |
| = new hash_table<trace_info_hasher> (trace_info.length ()); |
| dw_trace_info *tp; |
| FOR_EACH_VEC_ELT (trace_info, i, tp) |
| { |
| dw_trace_info **slot; |
| |
| if (dump_file) |
| fprintf (dump_file, "Creating trace %u : start at %s %d%s\n", tp->id, |
| rtx_name[(int) GET_CODE (tp->head)], INSN_UID (tp->head), |
| tp->switch_sections ? " (section switch)" : ""); |
| |
| slot = trace_index->find_slot_with_hash (tp, INSN_UID (tp->head), INSERT); |
| gcc_assert (*slot == NULL); |
| *slot = tp; |
| } |
| } |
| |
| /* Record the initial position of the return address. RTL is |
| INCOMING_RETURN_ADDR_RTX. */ |
| |
| static void |
| initial_return_save (rtx rtl) |
| { |
| struct cfa_reg reg; |
| reg.set_by_dwreg (INVALID_REGNUM); |
| poly_int64 offset = 0; |
| |
| switch (GET_CODE (rtl)) |
| { |
| case REG: |
| /* RA is in a register. */ |
| reg = dwf_cfa_reg (rtl); |
| break; |
| |
| case MEM: |
| /* RA is on the stack. */ |
| rtl = XEXP (rtl, 0); |
| switch (GET_CODE (rtl)) |
| { |
| case REG: |
| gcc_assert (REGNO (rtl) == STACK_POINTER_REGNUM); |
| offset = 0; |
| break; |
| |
| case PLUS: |
| gcc_assert (REGNO (XEXP (rtl, 0)) == STACK_POINTER_REGNUM); |
| offset = rtx_to_poly_int64 (XEXP (rtl, 1)); |
| break; |
| |
| case MINUS: |
| gcc_assert (REGNO (XEXP (rtl, 0)) == STACK_POINTER_REGNUM); |
| offset = -rtx_to_poly_int64 (XEXP (rtl, 1)); |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| break; |
| |
| case PLUS: |
| /* The return address is at some offset from any value we can |
| actually load. For instance, on the SPARC it is in %i7+8. Just |
| ignore the offset for now; it doesn't matter for unwinding frames. */ |
| gcc_assert (CONST_INT_P (XEXP (rtl, 1))); |
| initial_return_save (XEXP (rtl, 0)); |
| return; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| if (reg.reg != DWARF_FRAME_RETURN_COLUMN) |
| { |
| if (reg.reg != INVALID_REGNUM) |
| record_reg_saved_in_reg (rtl, pc_rtx); |
| reg_save (DWARF_FRAME_RETURN_COLUMN, reg, offset - cur_row->cfa.offset); |
| } |
| } |
| |
| static void |
| create_cie_data (void) |
| { |
| dw_cfa_location loc; |
| dw_trace_info cie_trace; |
| |
| dw_stack_pointer_regnum = dwf_cfa_reg (stack_pointer_rtx); |
| |
| memset (&cie_trace, 0, sizeof (cie_trace)); |
| cur_trace = &cie_trace; |
| |
| add_cfi_vec = &cie_cfi_vec; |
| cie_cfi_row = cur_row = new_cfi_row (); |
| |
| /* On entry, the Canonical Frame Address is at SP. */ |
| memset (&loc, 0, sizeof (loc)); |
| loc.reg = dw_stack_pointer_regnum; |
| /* create_cie_data is called just once per TU, and when using .cfi_startproc |
| is even done by the assembler rather than the compiler. If the target |
| has different incoming frame sp offsets depending on what kind of |
| function it is, use a single constant offset for the target and |
| if needed, adjust before the first instruction in insn stream. */ |
| loc.offset = DEFAULT_INCOMING_FRAME_SP_OFFSET; |
| def_cfa_1 (&loc); |
| |
| if (targetm.debug_unwind_info () == UI_DWARF2 |
| || targetm_common.except_unwind_info (&global_options) == UI_DWARF2) |
| { |
| initial_return_save (INCOMING_RETURN_ADDR_RTX); |
| |
| /* For a few targets, we have the return address incoming into a |
| register, but choose a different return column. This will result |
| in a DW_CFA_register for the return, and an entry in |
| regs_saved_in_regs to match. If the target later stores that |
| return address register to the stack, we want to be able to emit |
| the DW_CFA_offset against the return column, not the intermediate |
| save register. Save the contents of regs_saved_in_regs so that |
| we can re-initialize it at the start of each function. */ |
| switch (cie_trace.regs_saved_in_regs.length ()) |
| { |
| case 0: |
| break; |
| case 1: |
| cie_return_save = ggc_alloc<reg_saved_in_data> (); |
| *cie_return_save = cie_trace.regs_saved_in_regs[0]; |
| cie_trace.regs_saved_in_regs.release (); |
| break; |
| default: |
| gcc_unreachable (); |
| } |
| } |
| |
| add_cfi_vec = NULL; |
| cur_row = NULL; |
| cur_trace = NULL; |
| } |
| |
| /* Annotate the function with NOTE_INSN_CFI notes to record the CFI |
| state at each location within the function. These notes will be |
| emitted during pass_final. */ |
| |
| static unsigned int |
| execute_dwarf2_frame (void) |
| { |
| /* Different HARD_FRAME_POINTER_REGNUM might coexist in the same file. */ |
| dw_frame_pointer_regnum = dwf_cfa_reg (hard_frame_pointer_rtx); |
| |
| /* The first time we're called, compute the incoming frame state. */ |
| if (cie_cfi_vec == NULL) |
| create_cie_data (); |
| |
| dwarf2out_alloc_current_fde (); |
| |
| create_pseudo_cfg (); |
| |
| /* Do the work. */ |
| create_cfi_notes (); |
| connect_traces (); |
| add_cfis_to_fde (); |
| |
| /* Free all the data we allocated. */ |
| { |
| size_t i; |
| dw_trace_info *ti; |
| |
| FOR_EACH_VEC_ELT (trace_info, i, ti) |
| ti->regs_saved_in_regs.release (); |
| } |
| trace_info.release (); |
| |
| delete trace_index; |
| trace_index = NULL; |
| |
| return 0; |
| } |
| |
| /* Convert a DWARF call frame info. operation to its string name */ |
| |
| static const char * |
| dwarf_cfi_name (unsigned int cfi_opc) |
| { |
|