| Tue Dec 2 20:24:40 1997 Bruno Haible <haible@ilog.fr> |
| |
| * makeinfo/makeinfo.c (find_and_load, convert_from_stream): |
| Zero-terminate the file contents. |
| |
| Fri Oct 31 09:39:31 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * Makefile.in (install targets): Add a dummy target for sunos make. |
| (SUBDIR): Remove 'info'. It's unneeded. |
| |
| Wed Oct 29 22:56:46 1997 Robert Lipe (robertl@dgii.com) |
| |
| * info/termdep.h: If POSIX, #undef TIOCGETC for benefit of systems |
| that provide TIOCETC but not struct tchars. |
| |
| Wed Oct 15 09:49:57 1997 Richard Henderson <rth@cygnus.com> |
| |
| * info/man.c (find_man_formatter): Don't cast getenv(), but provide |
| a minimal declaration at top level. |
| |
| * makeinfo/makeinfo.c: Don't redefine alloca if it is already defined. |
| |
| Tue Oct 7 16:27:34 1997 Manfred Hollstein <manfred@s-direktnet.de> |
| |
| * aclocal.m4: Substitute INSTALL. |
| * configure: Re-built. |
| |
| Tue Oct 7 10:25:22 1997 Manfred Hollstein (manfred@lts.sel.alcatel.de) |
| |
| * info/man.c (SIGCHLD): Define to SIGCLD if <sys/signal.h> |
| fails to provide it. |
| |
| Wed Sep 17 23:56:11 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * util/install-info.c: Only provide an external decl for strrchr |
| if HAVE_STRCHR is not defined. |
| |
| Mon Sep 15 22:53:01 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * aclocal.m4: Add replacement for AC_PROG_INSTALL. |
| * configure.in: Use EGCS_PROG_INSTALL. |
| |
| Tue Sep 9 23:16:35 1997 H.J. Lu (hjl@gnu.ai.mit.edu) |
| |
| * Makefile (all): Remove sub-all. |
| (stmp-sub-all): New target. Renamed from sub-all. |
| (info, texinfo): Also depend on stmp-sub-all. |
| (clean): Also remove stmp*. |
| (maintainer-clean): New target. Same as realclean. |
| |
| Fri Sep 5 09:07:33 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * install-sh: Delete duplicate install script. |
| |
| Tue Sep 2 22:25:34 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * Makefile.in (install, install-info, installdirs, uninstall): Make |
| these phony targets. |
| |
| Tue Sep 2 10:19:48 1997 Richard Henderson <rth@cygnus.com> |
| |
| * makeinfo/makeinfo.c: Maybe include <stdlib.h> for malloc et al. |
| * util/install-info.c: Include <string*.h>. |
| (my_strerror): Use strerror if available. |
| |
| Tue Aug 26 11:18:52 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * libtxi/Makefile.in: Add dependencies for memcpy, memmove and strdup. |
| |
| Mon Jul 28 17:26:48 1997 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * aclocal.m4: Add CYGWIN and EXEEXT autoconf macros. |
| * configure.in: Use CYGWIN and EXEEXT autoconf macro to look for |
| win32 dependencies. |
| * configure: Regenerated with autoconf 2.12. |
| * Makefile.in: Add $(EXEEXT) to all executables. |
| * makeinfo/Makefile.in: Add $(EXEEXT) to all executables. |
| * util/Makefile.in: Add $(EXEEXT) to all executables. |
| |
| Mon May 26 12:44:43 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * texinfo.tex: Update to newest FSF version (2.201). |
| |
| Fri Mar 14 15:05:17 1997 Karl Berry <karl@cs.umb.edu> |
| |
| * info/terminal.c (terminal_prep_terminal): Only use OCRNL and |
| ONLCR if they are defined. Reported by many people. |
| |
| Wed Feb 12 11:15:16 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * util/texindex.c (main): Make main an int function, not void. |
| |
| Sat Jun 29 18:56:07 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * configure.in: if ac_cv_c_cross is yes, don't run the |
| AC_FUNC_SETVBUF_REVERSED call since it tries to do a run |
| test. This allows texinfo to build for cygwin32 Canadian |
| crosses/natives |
| * configure: regenerate |
| |
| Wed Jun 26 12:48:10 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| |
| * Makefile.in (bindir, libdir, mandir, infodir): Use autoconf-set |
| values. |
| * configure.in (AC_PREREQ): autoconf 2.5 or higher. |
| * configure: Rebuilt. |
| * emacs/Makefile.in (bindir, libdir, mandir, infodir): Use |
| autoconf-set values. |
| * info/Makefile.in (bindir, libdir, mandir, infodir): Use |
| autoconf-set values. |
| * libtxi/Makefile.in (bindir, libdir, mandir, infodir): Use |
| autoconf-set values. |
| * makeinfo/Makefile.in (bindir, libdir, mandir, infodir): |
| Use autoconf-set values. |
| * util/Makefile.in (bindir, libdir, mandir, infodir): Use |
| autoconf-set values. |
| |
| Fri Oct 4 07:49:49 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * Version 3.9. |
| |
| * Makefile.in (install): Say to install texinfo.tex manually. |
| |
| * util/texi2dvi, |
| * util/texindex.c, |
| * makeinfo/makeinfo.c, |
| * info/info.c: Include only the current year in the copyright message. |
| |
| * util/texi2dvi: Exit successfully. |
| From: Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>. |
| |
| Thu Oct 3 12:58:32 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * Rename install.sh to the preferred install-sh. |
| |
| * Makefile.in (VERSION), |
| * util/texi2dvi, |
| * util/texindex.c, |
| * util/install-info.c, |
| * makeinfo/makeinfo.c (minor_version, print_version_info), |
| * info/info.c: Update version number. |
| |
| * util/texi2dvi: Only show diff if verbose. |
| |
| * util/install-info.c (main): Check for a missing dir file as well |
| as a missing info files. |
| (main): At start of a node, completely initialize the newly-malloced |
| node structure. |
| |
| * texinfo.texi: Fix incorrect uses of @key, |
| insert missing newline in Installing Dir Entries' @menu item, |
| document install-info invocation. |
| |
| * Makefile.in (DISTFILES): Do not put .gdbinit's in distribution. |
| (dist): Use || instead of && (and invert sense) so make doesn't think |
| the command failed. |
| (dist): Exclude more junk. |
| |
| * makeinfo/makeinfo.c (cm_xref): Back out patch from Tom T., since |
| we generate a good-enough error message that is suppressible |
| without it. |
| |
| * util/gen-dir-node: The recommended name for the top-level info |
| file is dir, not dir.info. |
| |
| * util/install-info.c (main): At `Mark the end of the Top node', |
| make sure the node name is non-NULL before comparing it. From |
| lvirden@cas.org. |
| |
| * configure.in (AC_REPLACE_FUNCS): Use this for memcpy, memmove, |
| and strdup. |
| (AC_CHECK_FUNCS): Instead of this. |
| Because both bcopy and memmove are missing on the 3b2, as reported by |
| Gaylen Miller <gaylen@proaxis.com>, hence we must provide our own. |
| * libtxi/Makefile.in (LIBOBJS): New variable. |
| (OBJS): Include it. |
| * libtxi/memcpy.c, libtxi/memmove.c, libtxi/strdup.c: New files, |
| taken from fileutils 3.13. |
| * makeinfo/makeinfo.c, |
| * info/clib.c (strdup): Move to libtxi. |
| |
| Wed Oct 2 18:23:30 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * info/info-utils.h (memcpy) [!HAVE_MEMCPY], |
| * info/termdep.h (memcpy) [!HAVE_MEMCPY], |
| * makeinfo/makeinfo.c (memmove) [!HAVE_MEMMOVE]: Remove this |
| #ifdef, as we now include it in libtxi if missing. |
| |
| Tue Oct 1 17:41:52 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/Makefile.in (install), |
| * info/Makefile.in (install), |
| * Makefile.in (install): Use new option name --info-dir instead of |
| --infodir. |
| |
| * makeinfo/multi.c (out_char): New fn. Replace all calls to |
| putc/fprintf with calls to this. |
| |
| * util/install-info.c: Rename --infodir to info-dir. |
| |
| Mon Sep 30 10:07:21 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * Version 3.8. |
| |
| * texinfo.tex: Untabify. |
| |
| * texinfo.tex (\ptexl, \ptexL): Do not save, we have our own |
| commands now. |
| (\onepageout): Reformat for readability, and call \indexdummies |
| to avoid expansion of Texinfo commands (e.g., accents) in \write's. |
| (\,, \dotaccent, \ringaccent, \tieaccent, \ubaraccent, udotaccent, |
| \questiondown, \exclamdown, \dotless): New macros. |
| (\l): Let plain TeX definition remain, instead of switching |
| to ``lisp'' font. |
| (\multitable): Ensure space between the columns, |
| insert struts to make interline spacing constant, |
| use real strut instead of a box containing `Xy'. |
| (\indexdummies): Do not define \rm, \char, but |
| do define \@, \{, \}, \dotless, and \,. And \t should generate |
| \t, not \r. |
| (\indexnofonts): Define \, and \dotless as \indexdummyfont, |
| and let \@ be @. |
| (\doind): Reformat for readability, and use temp control sequence |
| names that actually make sense. |
| (\doublecolumnout, \pagesofar, \enddoublecolumns): Restore |
| Knuth's original code to avoid spurious overfull vbox messages. |
| (No boxes are actually overfull). |
| (\shortcontents): Do not allow hyphenations. |
| (\dochapentry, \tocentry): Make glue above and below flexible, to allow |
| better page breaks. |
| (\tex): Reset \, to its plain TeX meaning, |
| and do not reset \l. |
| |
| * COPYING: Update for new FSF address (from gcc dist). |
| |
| * libtxi/Makefile.in: Various simplifications. |
| |
| Sun Sep 29 12:58:44 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * util/texi2dvi: Use $progname instead of $0 for --version. |
| |
| * util/install-info.c (xmalloc, xrealloc): Declare malloc and |
| realloc as returning void *, |
| to avoid ptr/int problems on Digital Unix. |
| |
| * info/tilde.c (tilde_expand_word): Declare getenv as returning char *, |
| to avoid warning on Digital Unix. |
| |
| * makeinfo/multi.c (multitable_active): Declare extern here to |
| avoid ld warning on rs6000. |
| |
| * util/texindex.c (usage): Avoid ??' trigraph. |
| |
| * util/install-info.c: Include <sys/fcntl.h> or <fnctl.h>, |
| according to HAVE_SYS_FCNTL_H, |
| and only include <sys/file.h> if HAVE_SYS_FILE_H. |
| (readlines): Oops, had NULL's and 0's reversed for ptr/int members. |
| |
| * info/terminal.c (terminal_goto_xy): Remove spurious extra ;. |
| |
| * util/install-info.c: Untabify. (input_sections): Initialize. |
| (find_lines): Initialize the terminating element of the array. |
| (print_help): Document --infodir. |
| (main): Compare the basename of infile sans .info to the dir entry, |
| not infile itself. |
| * util/Makefile.in (clean): Remove the install-info binary. |
| |
| * info/Makefile.in (distclean): Remove *.info* files. |
| |
| * Makefile.in (install), |
| * info/Makefile.in (install), |
| * makeinfo/Makefile.in (install): Use --infodir instead of --info-file. |
| |
| * info/info.c, |
| * makeinfo/makeinfo.c: Avoid newlines in string constants for the |
| sake of SunOS cc. |
| |
| * makeinfo/multi.c: Do not assume ANSI C. |
| |
| * info/info.texi: Oops, need @end vtable for a @vtable. |
| |
| Sat Sep 28 16:31:28 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * Makefile.in (texinfo): Do not depend on sub-all, as then |
| makeinfo is always run. Instead, depend on texinfo.texi. |
| |
| * makeinfo/Makefile.in (info, dvi): New targets. |
| makeinfo.info, makeinfo.dvi: Do not depend on macro.texi for now. |
| |
| * info/Makefile.in (install): Must call install-info twice. |
| |
| * info/info-stnd.texi, |
| * info/info.texi, |
| * makeinfo/makeinfo.texi: Include direntry. |
| |
| * emacs/Makefile.in: Use && after cd, etc. |
| |
| * texinfo.texi: Kludges so makeinfo -E will not create spurious |
| differences. Add new direntries. |
| |
| * util/install-info.c, |
| * util/texindex.c, |
| * makeinfo/makeinfo.c, |
| * info/info.c: Standardize --version output. |
| |
| * makeinfo/makeinfo.c (defun_internal): Don't insert index command |
| if expanding macros. |
| (cm_footnotestyle): Don't change the footnote style if it was set |
| on the command line. |
| |
| * util/texi2dvi: Recompute original index files each time through loop. |
| Make indentation uniform. |
| Use same basename for the temp input files. |
| Standardize --version output. |
| |
| * info/Makefile.in (install), |
| * makeinfo/Makefile.in (install): Insert $(POST_INSTALL). |
| |
| Fri Sep 27 13:27:30 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.texi (Format with texi2dvi): Rewrite now that the script |
| runs in a loop. |
| |
| * info/Makefile.in (MAKEINFO): Simplify to ../makeinfo/makeinfo. |
| |
| Fri Sep 27 00:26:03 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * info/terminal.c [HAVE_TERMIOS_H] (terminal_prep_terminal, |
| terminal_unprep_terminal): Add code for termios. |
| [HAVE_TERMIOS_H] (original_termios, ttybuff): New variables. |
| * info/termdep.h: [HAVE_TERMIOS_H]: Add include of <termios.h>. |
| * configure.in: Add check for <termios.h>. |
| |
| Thu Sep 26 10:46:34 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * emacs/texnfo-upd.el, |
| * emacs/texinfo.el, |
| * emacs/texinfmt.el: Update from bob for new Texinfo commands, etc. |
| |
| * emacs/info.el, emacs/informat.el, emacs/makeinfo.el, |
| emacs/texnfo-tex.el: Update from Emacs 19.34 dist. |
| |
| * emacs/elisp-comp: Use TMPDIR if set. |
| |
| * util/Makefile.in (libdir): Remove. |
| |
| * makeinfo/Makefile.in (install), |
| * Makefile.in (install), |
| * info/Makefile.in (install): Run install-info. |
| (libdir): Remove. |
| |
| * texinfo.texi: Various fixes as I make this go through TeX. |
| |
| * util/install-info.c: Quote newlines in help message. |
| |
| * util/texi2dvi (texi2dvi): Run TeX until the aux/index files |
| stabilize, instead of just twice. From: David Shaw |
| <daves@gsms01.alcatel.com.au>. |
| |
| Tue Sep 24 14:43:03 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * dir: Blank dir file for installation on new systems. |
| |
| Mon Sep 23 12:18:43 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (args_from_string): Do not back up at a }; |
| that leads to an infinite loop. |
| |
| Sat Sep 21 17:48:04 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (cm_xref): Do not seg fault if outside of |
| any node. From: Tom Tromey <tromey@creche.cygnus.com>. |
| (cm_ctrl): Make obsolete. |
| |
| Tue Sep 17 13:30:08 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.tex (\inforef): Move to more appropriate place. |
| (\pounds): Remove spurious extra $. |
| (\email): Typeset argument in angle brackets. |
| (\macro): Use \doignore for robustness, instead of just letting TeX |
| parse the argument. |
| (\unmacro): Define. |
| |
| Sat Sep 14 16:17:35 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.texi: Document multitables, new ISBN number. |
| |
| Wed Sep 11 18:01:24 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/multi.c (struct env): Remove unused output_position |
| field; this needs to be global. |
| (setup_multitable_parameters): Implement template-defined multitables. |
| (output_multitable_row): Remove trailing whitespace. |
| |
| * makeinfo/makeinfo.c (_READ_BUFFER_GROWTH, struct _defines): |
| Remove leading underscore for POSIX/ANSI pedants. |
| (init_conversion): Initialize output_position here. |
| (init_paragraph): Instead of here, where it loses with the |
| multitable calls, eventually resulting in negative counts to the |
| write call when the output file is split. |
| |
| * texinfo.texi: First cut at macro documentation. |
| Change accent doc to use tables. |
| Remove whitespace experiments, they are now the default. |
| |
| Mon Sep 9 14:16:24 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c: Use putc instead of fprintf where possible. |
| (cm_accent): Put _ from @ubaraccent after argument. |
| |
| * util/texindex.c (strerror) [!strerror]: Conditionalize |
| declaration. |
| |
| Sat Sep 7 14:13:24 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (commandTable): Obsolete @setchapterstyle. |
| |
| Thu Sep 5 15:45:11 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (convert_from_loaded_file): Oops, fix |
| wording of initial output comment. |
| |
| * makeinfo/makeinfo.c (cm_angle_brackets): Rename from cm_key. |
| (commandTable): @email should produce angle brackets. |
| @key: Change name. |
| |
| Tue Sep 3 14:52:17 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.tex (\hsize): Decrease. |
| (\hoffset): Increase. |
| (\setleading): Decrease dramatically. |
| This change affects 8.5x11 format only. |
| |
| * texinfo.texi: Document accent commands. |
| |
| Mon Sep 2 11:10:49 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (commandTable): Deprecate @ichapter and |
| @titlespec. |
| Move all the deprecated @i<section> commands to the end of the list. |
| |
| * texinfo.texi: Document @pounds{} and @centerchap{}. |
| |
| * texinfo.tex (\centerchfplain): Rewrite to use \chfplain, and to |
| actually center. |
| (\unnchfplain): Just call \chfplain. |
| (\chfplain): Rewrite to be generally callable. |
| (\centerparametersmaybe): Hook, a no-op except with @centerchap. |
| |
| Sun Sep 1 15:01:49 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.texi: Document @<whitespace>, rearrange spacing section. |
| |
| * makeinfo.c (commandTable): Make @. @? @! insert themselves, |
| not be sentence-non-enders. They are sentence *enders*. Also, |
| make @\t and @\n insert a normal space character, not themselves. |
| Also, define @hyphenation. |
| (insert_space): New function. |
| (cm_ignore_sentence_ender): Remove this. |
| (flush_output): Check only for META-SPC, not META-<sentence-ender>. |
| |
| Fri Aug 30 18:55:30 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.texi: Document @- and @hyphenation{}. |
| Miscellanous fixes. |
| |
| * makeinfo/makeinfo.c (commandTable): Define @- as cm_no_op, since |
| makeinfo doesn't do hyphenation. |
| |
| Thu Aug 29 13:05:38 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.tex (\key): Do not uppercase the argument; key names |
| can be mixed case, e.g., `Control'. |
| |
| * makeinfo/makeinfo.c: @infotop, @infounnumbered, |
| @infounnumberedsec, @infounnumberedsubsec, |
| @infounnumberedsubsubsec, @infoappendix, @infoappendixsec, |
| @infoappendixsubsec, @infoappendixsubsubsec, @infochapter, |
| @infosection, @infosubsection, @infosubsubsection: |
| Remove these long-since obsolete commands. |
| @iappendix, @iappendixsection, @iappendixsec, @iappendixsubsec, |
| @iappendixsubsubsec, @ichapter, @isection, @isubsection, |
| @isubsubsection, @iunnumbered, @iunnumberedsec, @iunnumberedsubsec, |
| @iunnumberedsubsubsec: |
| Deprecate these. |
| @infoinclude: |
| Obsolete this. |
| @,: Have to take an argument, since have to do @,{c} not c@,; can't |
| feasibly implement the latter in TeX. |
| |
| * makeinfo/makeinfo.c: Rename @d to @udotaccent, since this is |
| relatively infrequently used. |
| |
| Tue Aug 27 14:58:56 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * info/info.c (print_short_help), |
| * util/install-info.c (print_help), |
| * util/texi2dvi, |
| * makeinfo/makeinfo.c (usage) Include bug reporting address. |
| |
| Mon Aug 26 15:27:17 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (commandTable): Remove @input, @medbreak, |
| @smallbreak, @overfullrule, @br. |
| |
| Sun Aug 25 17:25:48 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (commandTable): Unify commands that perform |
| the same operation, such as cm_file, cm_samp, cm_email, |
| etc., which all do cm_code. |
| |
| * texinfo.texi: Document @ifhtml ... @end ifhtml. Change |
| `PlainTeX' to `plain TeX'. |
| |
| Fri Aug 23 16:03:16 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.tex (\pounds): New Texinfo command @pounds{}. |
| (\parskip): New smaller value. |
| (\chapheadingskip, \secheadingskip, \subsecheadingskip): New smaller |
| values, both for 8.5x11 and @smallbook formats. From Bob. |
| |
| * makeinfo/makeinfo.c (cm_special_char): @pounds{} prints a #. |
| (commandTable): Add new command @pounds. |
| |
| Tue Aug 20 13:47:20 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (CommandTable): Restore "!", accidentally |
| removed previously. |
| |
| * texinfo.tex (\key): Typeset a lozenge around the argument (from |
| gildea@intouchsys.com). |
| * makeinfo/makeinfo.c (cm_key): Surround arg with <...> to match |
| new lozenge style in TeX. |
| |
| Wed Aug 14 16:59:23 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.texi: Propagate change from rms. |
| |
| Tue Aug 13 11:33:27 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.texi: Propagate change from rms. |
| |
| * texinfo.texi: Document other @headings options. |
| |
| Sun Aug 11 13:19:42 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (cm_accent, cm_special_char, cm_dotless): |
| New functions. |
| (CommandTable): Add new commands for all of plain.tex's |
| accents and non-English characters. |
| |
| Fri Aug 9 14:12:07 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (convert_from_loaded_file): Say we're making |
| ``text'' file if no_headers. Also, use `input_filename' instead |
| of just `name' for clarity. |
| (suffixes): Check for no suffix last, i.e., prefer `foo.texi' as an |
| input file to `foo'. (The latter is probably a binary.) |
| |
| Mon Aug 5 13:52:39 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.tex (\heading, \subheading, \subsubheading): Can no |
| longer call the nonexistent \*secheadingi series. Instead, call |
| \plain*secheading. |
| (\plainsubsecheading, \plainsubsubsecheading): New macros, by analogy |
| with \plainsecheading. |
| (\unnumberedsubseczzz, \unnumberedsubsubseczzz): Call them. |
| |
| Sun Aug 4 16:46:10 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * makeinfo/makeinfo.c (flush_output): Mask out eighth bit, that we |
| turned on in non-sentence enders. |
| |
| Sat Aug 3 14:03:10 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.tex (\HEADINGSdouble, \HEADINGSsingle, |
| HEADINGSdoubleafter, \HEADINGSsingleafter, \CHAPPAGoff, |
| \CHAPPAGon, \CHAPPAGodd): Set \contentsalignmacro, analogous to |
| \pagealignmacro. |
| (\startcontents): Call \contentsalignmacro instead of \pagealignmacro. |
| |
| Mon Jul 29 14:44:33 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.tex (\indexfonts): Make leading be 12pt. Otherwise, it's |
| too crammed. |
| (\smalllispx): Remove \setleading{10pt}. That was too small. |
| (\doprintindex): Do not call \tex ... \Etex. Index files are Texinfo |
| source, not TeX source, except for using \ instead of @ as the |
| escape character (for now). |
| |
| Sun Jul 28 13:37:05 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.tex (paragraphindent): Move to more reasonable place in |
| the source file. |
| (chapfonts, secfonts, subsecfonts, indexfonts): Call \setleading. |
| (\chfplain, \secheading, \plainsecheading, \subsecheading, |
| \subsubheading): Rewrite to properly \hangindent the title. |
| (\sectionheading): New generic macro to print section titles. |
| |
| * texinfo.texi: Update the `Obtaining TeX' node. |
| |
| Fri Jul 26 14:11:48 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * util/texi2dvi: Do macro expansion with makeinfo before running TeX. |
| Various expansion safety measures added for test; avoid use of -o. |
| |
| * makeinfo/makeinfo.c (usage): More usage message tweaks. |
| |
| Fri Jul 26 11:55:37 1996 Karl Berry <karl@laurie> |
| |
| * util/texi2dvi: Format usage message to conform to the other *utils. |
| |
| Thu Jul 25 17:05:47 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * emacs/Makefile.in: Do not compile the Elisp by default. We |
| don't install it, so it confuses people to compile it. |
| |
| Sun Jul 21 07:20:09 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * util/Makefile.in (install-info): Dependency should be |
| install-info.o, not install-info. Also, update copyright years. |
| |
| * makeinfo/makeinfo.c (cm_printindex): Don't call execute_string |
| to print index entries, we've already done the expansion now. |
| |
| * makeinfo/makeinfo.h: Add copyright. Finish merge of rms changes. |
| * makeinfo/makeinfo.c: Finish merge, add my expansion changes again. |
| * makeinfo/multi.c: Add copyright message. |
| |
| Fri Jul 19 10:35:22 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * info/info.c: Update copyright date. |
| |
| * info/info.texi, |
| * util/install-info.c, |
| * emacs/Makefile.in, |
| * emacs/texnfo-tex.el, |
| * emacs/Makefile.in: Change FSF address. |
| |
| * Merged changes from bfox -- below, plus multitable changes, plus |
| lots more. |
| |
| Sun Apr 14 08:49:50 1996 Brian J. Fox <bfox@nirvana.samsara.com> |
| |
| * makeinfo/makeinfo.c (remember_node_reference): Numerous commands |
| call remember_node_reference. If a node has not yet been defined, |
| use the empty string as the current node for those cases. |
| |
| Mon Feb 12 17:35:38 1996 Brian J. Fox <bfox@nirvana.samsara.com> |
| |
| * makeinfo/makeinfo.c (push_node_filename): Clean up calls to |
| xmalloc and xrealloc. Only have to call xrealloc. |
| |
| Fri Jan 26 08:00:38 1996 Brian J. Fox <bfox@nirvana.samsara.com> |
| |
| * info/session.c (info_input_buffer_space_available): Fix typo |
| which forced the limitation of the sizeof (int) instead of sizeof |
| (buffer). |
| |
| * Makefile.in (PACKVER): now at 3.8. Add TERMIOS support to |
| Info. Minor bugs fixed in Makeinfo. |
| |
| Sat Jul 13 11:58:57 1996 Karl Berry <karl@cs.umb.edu> |
| |
| * texinfo.texi (ftable vtable): Mention example. |
| |
| Sun Jun 30 14:59:51 1996 Karl Berry <karl@goldman.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c (cm_email): New function for new @email command. |
| * texinfo.texi (email): New node documenting it. |
| |
| Wed Apr 17 18:07:34 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c (cm_kbd): Do nothing if in @example or @code. |
| (struct brace_element): New field in_fixed_with_font. |
| (remember_brace_1): Save in_fixed_with_font. |
| (pop_and_call_brace): Restore in_fixed_with_font. |
| (cm_code): Don't decrement in_fixed_with_font at end of construct. |
| (struct istack_elt): New field in_fixed_with_font. |
| (push_insertion, pop_insertion): Save and restore in_fixed_with_font. |
| (end_insertion): Don't decrement in_fixed_with_font here. |
| (not_fixed_width): New function. |
| (cm_sc, cm_var, cm_italic, cm_roman, cm_titlefont): |
| Use not_fixed_width. |
| |
| Sat Apr 13 23:22:05 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> |
| |
| * util/install-info.c (main): Fatal error if no input file spec'd. |
| Look for START-INFO-DIR-ENTRY, not BEGIN-INFO-DIR-ENTRY. |
| |
| Thu Apr 11 18:21:50 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c (cm_enddots): New function. |
| (self_delimiting): Accept -, ^ and ". |
| (CommandTable): Add commands -, ^, ", enddots, centerchap. |
| |
| Sun Mar 24 12:18:32 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c (enum insertion_type): Add `direntry'. |
| (insertion_type_names): Add "direntry". |
| (cm_dircategory): New function. |
| (cm_direntry): New function. |
| (CommandTable): Add "dircategory" and "direntry". |
| (insert_string): New function. |
| (end_insertion): Handle direntry. |
| (begin_insertion): Handle direntry. |
| |
| Sun Mar 24 11:10:05 1996 Karl Berry <karl@spiff.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c (cm_url): New function for new @url command. |
| |
| Fri Feb 23 21:14:40 1996 Richard Stallman <rms@mole.gnu.ai.mit.edu> |
| |
| * info/Makefile.in (install, uninstall): Use manprefix. |
| |
| Fri Feb 23 19:50:18 1996 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> |
| |
| * util/Makefile.in (install-info, install-info.o): New targets. |
| (all): Depend on install-info. |
| (install, uninstall): Operate on install-info. |
| |
| * install-info.c: New file. |
| |
| Wed Jan 3 10:01:45 1996 Brian J. Fox <bfox@nirvana.datawave.net> |
| |
| * makeinfo/makeinfo.c (make_index_entries_unique): Be a little bit |
| stricter about what makes two index entries identical. |
| |
| Fri Dec 29 13:00:24 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * makeinfo/makeinfo.c (Whole File): Add @detailmenu for allowing |
| detailed menu listings to appear while still defaulting nodes. |
| |
| Wed Dec 27 13:54:30 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c (cm_code): Always notice that we are in |
| fixed_width_font, even if other formatting changes are not to take |
| place. |
| |
| Sat Dec 23 11:48:43 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * info/man.c: (clean_manpage) Remove ^L's from page. |
| |
| * makeinfo/makeinfo.c (get_brace_args): Change some memcpy's to |
| memmoves. |
| |
| * info/info.c (main): Prefer caseless matches over partial |
| matches. |
| |
| * Makefile.in (All Subdir Targets): Change suggested by Debian |
| people which allows errors in recursive makes to kill the |
| top-level make. |
| |
| * makeinfo/Makefile.in (makeinfo.dvi): New target. |
| |
| * info/info.c (main): Print version of containing texinfo package. |
| |
| * makeinfo/makeinfo.c (flush_output): Don't strip high-bit from |
| sentence_enders. |
| Print the version number of the containing texinfo package. |
| |
| * info/man.c (locate_manpage_xref): Count the 0th entry. |
| |
| * makeinfo/makeinfo.c (cm_menu): If a menu is seen before a node |
| has been defined, warn, and create the node `Top'. |
| |
| Wed Jun 21 03:19:39 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c (cm_infoinclude): Clean up after printing |
| error if the file couldn't be included. |
| (discard_braces): Print errors only for those unmatched open |
| braces that belong to a texinfo command. |
| |
| * */Makefile.in: Use @CFLAGS@ and @LDFLAGS@. |
| |
| * makeinfo/makeinfo.c: End `node_search_string' and friends with a |
| terminating null character. |
| |
| Wed Jun 21 01:23:49 1995 Jim Meyering (meyering@comco.com) |
| |
| * makeinfo/makeinfo.c: Close comment after #endif. |
| |
| Tue Jun 20 04:58:26 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> |
| |
| * emacs/Makefile.in (install): Fix typo: "fle" -> "file". |
| |
| * Makefile.in (VERSION): Bump to 3.6 |
| |
| * info/clib.c: Include general.h for `info_toupper' and friends. |
| |
| * info/clib.h: strncmp and strncascmp return an int. What kind of |
| drugs was I on? |
| |
| Mon Jun 19 23:34:47 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c (make_index_entries_unique): Copy the last |
| index entry. |
| |
| Mon Jun 19 21:55:49 1995 Noah Friedman <friedman@prep.ai.mit.edu> |
| |
| * util/texi2dvi (--version): New option. |
| Cosmetic changes. |
| |
| Mon Jun 19 16:06:40 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c (cm_macro): Fix typo. `x != y' is not the |
| same as `x |= y'. |
| |
| * info/Makefile.in (exec_prefix): Use @exec_prefix@ not $(prefix). |
| * makeinfo/Makefile.in (exec_prefix): Use @exec_prefix@ not $(prefix). |
| * util/Makefile.in (exec_prefix): Use @exec_prefix@ not $(prefix). |
| * libtxi/Makefile.in (exec_prefix): Use @exec_prefix@ not $(prefix). |
| |
| * emacs/Makefile.in (uninstall): New target. |
| (install): Use the definition of $(lispdir), don't dynamically |
| find it. Use INSTALL_DATA not cp. |
| (exec_prefix): use @exec_prefix@ not $(prefix). |
| |
| * makeinfo/makeinfo.c (apply): If there isn't an actual argument |
| for a named argument, default it to "". |
| |
| * Makefile.in (VERSION): Now at 3.5. |
| (texinfo): Make ./makeinfo/makeinfo depend on sub-all for parallel |
| makes. |
| |
| * emacs/Makefile.in (ELISP_OBJS): Explictly declare .el and .elc |
| in the SUFFIXES list. |
| |
| * makeinfo/makeinfo.c (cm_today): Special case for losing alpha. |
| * (minor_version): Increase to 63. |
| |
| * info/info.c (version_string): Now at 2.14. |
| * info/tilde.c: Declare getenv to return (char *). |
| * info/window.c (build_message_buffer): Jump through hoops to keep |
| DEC Alpha's happy. |
| |
| * info/xmalloc.c: Declare malloc and realloc as (void *) returning |
| functions. |
| |
| Sun Jun 18 12:47:21 1995 Richard Stallman <rms@mole.gnu.ai.mit.edu> |
| |
| * emacs/detexinfo.el (detexinfo-line-cmds-without-arg): |
| Handle ifhtml. |
| |
| Fri Jun 16 13:48:14 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> |
| |
| * util/texindex.c: Update TEXINDEX_VERSION_STRING for texinfo 3.4 |
| |
| * (All *.c *.h *.in): Change FSF old address to new. |
| * texinfo.texi (Obtaining TeX): Change FSF old address to new |
| address. Change Old phone numbers to new phone numbers. |
| |
| * Makefile.in (VERSION): Change to 3.4. |
| |
| Thu Jun 15 22:49:07 1995 Robert J. Chassell <bob@hill.gnu.ai.mit.edu> |
| |
| * texinfo.texi, emacs/=development/cover.texi: update |
| Texinfo distribution package version number |
| |
| Thu Jun 15 09:23:02 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * info/info.c: (minor_version): Set to 13. |
| |
| * info/clib.c,h: New files gather together replacement functions |
| for those POSIX-style C library functions that are not present on |
| the target system. |
| |
| * info/Makefile.in (SRCS): Add clib.c and clib.h. makedoc now |
| needs clib.o to build on systems missing various string.h stuff. |
| |
| * info/variables.c (whole file): Call strdup, not savestring. |
| * info/tilde.c (whole file): Call strdup, not savestring. |
| * info/search.c (whole file): Call strdup, not savestring. |
| * info/nodes.c (whole file): Call strdup, not savestring. |
| * info/nodemenu.c (whole file): Call strdup, not savestring. |
| * info/man.c (whole file): Call strdup, not savestring. |
| * info/makedoc.c (whole file): Call strdup, not savestring. |
| * info/m-x.c (whole file): Call strdup, not savestring. |
| * info/info.c (whole file): Call strdup, not savestring. |
| * info/indices.c (whole file): Call strdup, not savestring. |
| * info/echo_area.c (whole file): Call strdup, not savestring. |
| * info/session.c (whole file): Call strdup, not savestring. |
| * info/filesys.c (whole file): Call strdup, not savestring. |
| |
| * makeinfo/makeinfo.c (minor_version): Change to 1.62. |
| * makeinfo/makeinfo.c (get_execution_string): Initialize `i' to 0 |
| in case there are no execution_strings. |
| |
| Wed Jun 14 17:48:06 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * texinfo.texi: include "texinfo.tex", not "texinfo". |
| * info/session.c (forget_window_and_nodes): Place a sequence point |
| in between "info_windows[i] = info_windows[++i];" as per various |
| compiler experts. |
| |
| * makeinfo/makeinfo.c (strdup): Create this function if the system |
| doesn't have it. |
| (discard_insertions): Use the insertion's filename, not the |
| current input file. |
| (push_insertion): Remember the current input file with each |
| insertion. |
| (pop_insertion): Free storage used by remembered input file. |
| |
| * makeinfo/makeinfo.c (whole file): Use `strdup' instead of |
| `savestring'. |
| * configure.in: Check for `strdup'. |
| |
| Wed Jun 14 15:58:51 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> |
| |
| * libtxi/Makefile.in (prefix): Use @prefix@, not /usr/local/ |
| |
| Wed Jun 14 10:50:57 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * Makefile.in (DISTFILES): Don't include *.elc files in the list |
| of files to distribute. |
| (installdirs): Include `emacs' in the list of sub-dirs with |
| Makefile.in's. |
| |
| * emacs/elisp-comp: Shell script which batch compiles the *.el files. |
| * emacs/Makefile.in: New file contains targets to build the elc files. |
| * configure.in: Add `emacs/Makefile' to the list of created makefiles. |
| * makeinfo/makeinfo.c (whole file): Give every function a return |
| type. All cm_xxx functions are now void. Add declarations for |
| functions to top of file. |
| |
| Mon Jun 12 12:00:57 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * info/man.c (reference_section_starters): Add versions of "SEE |
| ALSO" and "RELATED INFORMATION" with tabs instead of spaces as |
| well. |
| |
| * util/texindex.c: Back out changes for OFF_T. Explicity coerce |
| the result of lseek to a long, and use longs everywhere. |
| |
| * texinfo.texi: Change "@end shorttitlepage" to "@end titlepage". |
| * makeinfo/makeinfo.c: Make @shorttitlepage ignore the rest of the |
| line. |
| |
| * util/texindex.c (strrchr): Create if not present. |
| Test for HAVE_STRCHR and HAVE_STRING_H. |
| (main): Make PROGRAM_NAME be just the last path componenet of argv[0]. |
| (decode_command): Rewrite. |
| (usage): Rewrite. Now texindex handles --version. |
| |
| * makeinfo/makeinfo.c (make_index_entries_unique): Rewrite from |
| scratch. |
| |
| * Don't distribute created info files with texinfo. After all, |
| the user will have the tools necessary to create them, yes? |
| |
| * Makefile.in (distclean): Remove *.log |
| |
| * info/man.c (read_from_fd): Change timeout value for select to 15 |
| seconds. Some systems (e.g., albert.ai.mit.edu) actually need |
| more than 10 seconds to format a man page. |
| |
| * info/tilde.c: Fix typo in declaration for |
| `tilde_expansion_failure_hook'. |
| |
| Wed Jun 7 13:36:53 1995 Brian Fox <bfox@albert.gnu.ai.mit.edu> |
| |
| * info/tilde.h: Change type of tilde_expansion_failure_hook to |
| a pointer to a function returning a (char *). |
| * info/tilde.c: Change type of tilde_expansion_failure_hook to a |
| pointer to function returning a (char *). |
| |
| * makeinfo/makeinfo.c (get_execution_string): Don't use `i' in the |
| latter assignment, use `execution_strings_index' instead. |
| |
| * info/man.c (read_from_fd): Change logic to avoid using FIONREAD. |
| |
| * info/xmalloc.c (xrealloc): Use (void *), not (caddr_t *). |
| * info/xmalloc.c (xmalloc): Use (void *), not (caddr_t *). |
| |
| * Makefile.in (DISTFILES): Don't find RCS no "=" directories. |
| |
| * util/Makefile.in (prefix): Use @prefix@ as the value. |
| * info/Makefile.in (prefix): Use @prefix@ as the value. |
| * makeinfo/Makefile.in (prefix): Use @prefix@ as the value. |
| |
| Wed Jun 7 12:29:28 1995 Robert J. Chassell <bob@hill.gnu.ai.mit.edu> |
| |
| * texinfo.texi: Correct minor typos. |
| |
| * emacs/texinfmt.el: Don't require @shorttitlepage to be inside |
| of @iftex ... @end iftex |
| |
| Mon May 8 18:33:52 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * info/nodes.c: #include "man.h" if HANDLE_MAN_PAGES. |
| (info_get_node_of_file_buffer): If the file buffer is one |
| associated with manpages, call the manpage node finding |
| function instead. |
| (info_find_file_internal): If the file buffer is one associated |
| with manpages, avoid doing any file I/O. |
| (info_reload_file_buffer_contents): Ditto. |
| (info_find_file_internal): Call create_manpage_file_buffer instead |
| of info_load_file_internal. |
| |
| * info/info.c: #include "man.h" if HANDLE_MAN_PAGES. |
| (main): If the initial node cannot be found, perhaps find it as a |
| manpage. |
| * info/info-utils.c: #include "man.h" if HANDLE_MAN_PAGES. |
| (info_xrefs_of_node): If handling man pages, and this is a manpage |
| node, use xrefs_of_manpage. |
| |
| * info/session.c (info_set_input_from_file): Only fclose (stream) |
| if it is non-null and not stdin. |
| #include "man.h" if HANDLE_MAN_PAGES. |
| (info_menu_or_ref_item): If handling man pages, and this is a |
| manpage node, get the xrefs from manpage_xrefs_in_binding. |
| (info_man): Compile in for M-x man if handling man pages. |
| (info_move_to_xref): If handling man pages, and the current node |
| is a manpage node, use locate_manpage_xref to get xrefs. |
| |
| Thu May 4 08:55:23 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * info/info.c (main): If the output device is not a terminal, and |
| no output filename has been specified, make user_output_filename |
| be "-", so that the info is written to stdout, and turn on the |
| dumping of subnodes. |
| |
| Thu Apr 13 18:05:06 1995 Daniel Hagerty <hag@churchy.gnu.ai.mit.edu> |
| |
| * texinfo.texi: Fixed @end titlepage/@end shorttitlepage |
| |
| Sat Apr 8 12:51:49 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu> |
| |
| * makeinfo/makeinfo.c [! HAVE_STRERROR] (strerror): New function, |
| snarfed from ../info/filesys.c. |
| (cm_infoinclude): Use strerror instead of sys_errlist. |
| |
| Tue Apr 4 18:44:00 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * util/texindex.c (sort_offline): Change TOTAL to be an off_t. |
| * util/texindex.c (sort_in_core): Change TOTAL to be an off_t. |
| * util/texindex.c (MAX_IN_CORE_SORT): Cast to off_t. |
| |
| Sun Apr 2 16:20:13 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * info/Makefile.in: Define DEFAULT_INFOPATH in case we are |
| compiling in the current directory. |
| * info/Makefile.in (info.o): Add filesys.h because of DEFAULT_INFOPATH. |
| * info/(search.c,h, nodes.c info-utils.c) Use strcasecmp and |
| strncasecmp instead of stricmp and strnicmp. Define strcasecmp |
| and strncasecmp in search.c if !HAVE_STRCASECMP. |
| * info/search.c: If HAVE_STRING_H include it. |
| * info/nodes.c: If HAVE_STRING_H include it. |
| * info/info-utils.c: If HAVE_STRING_H include it. |
| * info/info.h: If HAVE_STRING_H include it. |
| * configure.in (AC_HAVE_FUNCS): Check for strcasecmp. |
| * makeinfo/makeinfo.c (strcasecmp): Define if !HAVE_STRCASECMP. |
| * makeinfo/makeinfo.c (entire file): Use `strcasecmp' instead of |
| `stricmp'. |
| * makeinfo/makeinfo.c (cm_ifeq): New command takes three args. |
| Compares first two, executes remainder if the first two are |
| string-wise eq. |
| * makeinfo/makeinfo.c (ifhtml): Add to command list. Shouldn't be |
| used, but it is by people who don't want to hack macros. |
| |
| Sat Apr 1 09:20:14 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * makeinfo/makeinfo.c (begin_insertion): Fix reversed arguments to |
| line_error. |
| |
| * info/info-stnd.texi: Use "end" footnote style instead of "separate". |
| |
| * info/Makefile.in: Change "rm -f" to $(RM). |
| |
| * info/general.h: Define zero_mem in terms of memset if we have |
| it, else in terms of bzero if we have that, else as inline code. |
| |
| * info/NEWS: Updated to reflect changes in 2.11. |
| |
| Fri Mar 31 22:38:31 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * Makefile (DISTFILES): Don't include *.a, *orig, nor *.e |
| files. |
| (DISTFILES): |
| |
| Sat Mar 4 12:16:29 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * Makefile.in: Use @prefix@ instead of hardwired `/usr/local'. |
| Clean up makefile rules which make in subdirs. |
| (ALL_SUBDIRS): Add makeinfo/macros to list of subdirectories. |
| |
| * configure.in (AC_CHECK_FUNCS): Add `bcopy' to list of things to |
| check for. |
| |
| Fri Mar 3 13:54:10 1995 Robert J. Chassell <bob@hill.gnu.ai.mit.edu> |
| |
| * texinfo.texi: Minor changes for incremental new edition 2.20. |
| |
| Fri Mar 3 19:01:36 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * filesys.c (filesys_read_info_file): Local variable ST_SIZE is a |
| long which has the value of finfo->st_size casted to it. |
| * nodes.c (whole file): Similar changes. |
| |
| These changes and the following for makedoc.c were required for |
| proper operation on HPm68k NetBSD. |
| |
| Mon Feb 27 15:16:27 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * makedoc.c (process_one_file): Local variable FILE_SIZE is a long |
| which has the value of finfo.st_size casted to it. |
| |
| |
| Fri Mar 3 18:58:38 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * makeinfo.c (find_and_load): Cast fileinfo.st_size to a long for |
| internal use. This makes things work on NetBSD. |
| |
| |
| Fri Mar 3 13:54:10 1995 Robert J. Chassell <bob@hill.gnu.ai.mit.edu> |
| |
| * texinfo.texi: Minor changes for incremental new edition 2.20. |
| |
| Fri Mar 3 09:41:39 1995 Brian J. Fox <bfox@wizard.datawave.net> |
| |
| * configure.in (TERMLIBS): Use AC_CHECK_LIB instead of |
| AC_HAVE_LIBRARY. |
| |
| Mon Jan 9 16:55:31 1995 Brian Fox <bfox@churchy.gnu.ai.mit.edu> |
| |
| * Makefile.in (DISTFILES): Add the directory EMACS-BACKUPS to the |
| list of things to avoid distributing. |
| |
| Tue Nov 29 17:48:37 1994 David J. MacKenzie <djm@duality.gnu.ai.mit.edu> |
| |
| * configure.in: Check for off_t. |
| * util/texindex.c (main): Use it. |
| |
| Fri Nov 11 14:46:28 1994 David J. MacKenzie <djm@duality.gnu.ai.mit.edu> |
| |
| * configure.in: Update for Autoconf v2. |
| |
| Thu Oct 13 02:17:38 1994 Richard Stallman <rms@mole.gnu.ai.mit.edu> |
| |
| * emacs/detexinfo.el (detexinfo): Handle @!, @?, @^, @". |
| |
| Mon Aug 1 03:26:13 1994 Richard Stallman <rms@mole.gnu.ai.mit.edu> |
| |
| * texindex.c: Move the memset define down past string.h include. |
| |
| Tue Jun 28 14:21:43 1994 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu) |
| |
| * makeinfo/makeinfo.c: Add --help option. |
| (usage): Take args for stream and error code. |
| Change callers. |
| (print_version_info): Write to stdout, not stderr. |
| |
| Wed May 18 18:55:24 1994 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * info/session.c (forget_window_and_nodes): Negate test for |
| internal_info_node_p. We only want to free the text if it is |
| not an internal node. |
| |
| Thu Mar 10 03:07:18 1994 Richard Stallman (rms@mole.gnu.ai.mit.edu) |
| |
| * texindex.c (memset): Fix invalid parm name (was 0). |
| |
| Thu Feb 10 12:56:52 1994 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * makeinfo/makeinfo.c (current_item_function): Don't loop if elt |
| is NULL. |
| |
| Wed Feb 9 12:21:09 1994 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * makeinfo/makeinfo.c (minor_version): Release now at 1.60. |
| |
| * makeinfo/makeinfo.c (expand_filename): Additional fixes. Now |
| when called with NULL filename, makes an output filename from the |
| input filename. |
| (convert_from_loaded_file): If REQUIRE_SETFILENAME is #defined (no |
| longer the default case) then error if no @setfilename was found |
| in the file. If REQUIRE_SETFILENAME is not #defined, the input |
| file starts either at the first line, or at the second line if the |
| first line contains the text "\input", and the output filename is |
| the input file name without directory and with ".info" replacing |
| any extension found. |
| (convert_from_loaded_file): Fixed bug in search for first |
| occurence of "@setfilename". |
| |
| Tue Feb 8 14:16:58 1994 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * configure.in: Check for sys/file.h. |
| info/dir.c, info/filesys.c, info/makedoc.c, info/nodes.c, |
| info/session.c, info/termdep.h, makeinfo/makeinfo.c |
| [HAVE_SYS_FILE_H]: Include <sys/file.h>. |
| |
| * makeinfo/makeinfo.c (convert_from_loaded_file): Print |
| real_output_filename instead of output_filename, so user knows |
| exactly where output file is going. |
| |
| Fri Jun 11 14:34:30 1993 Ian Lance Taylor (ian@cygnus.com) |
| * configure.in: Check for sigprocmask and sigsetmask. |
| * info/signals.h (HAVE_SIGSETMASK): Don't define. |
| (HAVE_SIGPROCMASK): Use instead of _POSIX_VERSION. |
| (BLOCK_SIGNAL, UNBLOCK_SIGNAL): If neither HAVE_SIGPROCMASK nor |
| HAVE_SIGSETMASK is defined, define these to do nothing. |
| * info/signals.c (sigprocmask): Don't compile if HAVE_SIGSETMASK |
| is not defined. |
| |
| * info/terminal.c (terminal_prep_terminal): Don't clobber VINTR |
| and VQUIT in conditionals. |
| |
| Mon Feb 7 18:10:22 1994 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * makeinfo/makeinfo.c (full_pathname): Correct to really return |
| the full pathname of the input argument. Now makeinfo |
| /foo/bar.texi, where /foo/bar.texi contains "@setfilename |
| bar.info", correctly leaves the output file in "./bar.info". |
| Note that "@setfilename ../bar.info" still works; this is already |
| an absolute pathname. |
| |
| Sat Feb 5 13:04:05 1994 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * makeinfo/makeinfo.c: Version 1.59 released. |
| |
| * makeinfo/makeinfo.c (whole file): Large number of changes allow |
| the "-E filename" option to be used to write a macro expanded |
| output file. On a file which contains no @include's and no |
| @macro's, the output file is identical to the input file. |
| |
| * makeinfo/makeinfo.c (declarations): Remove cm_tex (). It is |
| never used since it is implemented with `command_name_condition'. |
| |
| * makeinfo/makeinfo.c (add_char): Shift braces following the |
| current break point if we have deleted any characters. |
| (adjust_braces_following): New function adjusts all of the markers |
| in the brace stack which follow HERE by AMOUNT. This fixes a bug |
| where (for example) @var{} immediately following a line break |
| which is the end of a sentence modified the output incorrectly. |
| |
| Wed Feb 2 14:14:03 1994 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * makeinfo: Version 1.58. |
| |
| * makeinfo/makeinfo.c (cm_node): Add extra hair to allow |
| backtracking through execution strings. Add extra hair to allow |
| the first node seen after a @top node is seen to adjust the |
| sectioning level of the @top node and associated menus. |
| Fix a few typos. |
| Add facility for macros to invoke the original definition. This |
| works by not allowing a single macro to recurse. Mutual recursion |
| is also disallowed with this plan. |
| |
| * makeinfo/macros: New directory contains shippable macros. |
| * makeinfo/macros/simpledoc.texi: Macros which simplify the most |
| common uses of TeXinfo. See the example file. |
| Macros are now a reasonable way to get people started using |
| TeXinfo. |
| |
| Mon Jan 31 12:54:36 1994 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * makeinfo/makeinfo.c (minor_version): Increase to 57. |
| |
| * makeinfo/makeinfo.c (cm_node): Call execute_string on the node, |
| next, prev, and up pointers. |
| (reader_loop): Change logic for `@bye'. No longer required at the |
| ends of executed strings. |
| (execute_string): Do not append `@bye' to the string to execute. |
| |
| * makeinfo/makeinfo.c (whole file): Use COMMAND_PREFIX instead of |
| hardcoding `@' character in strings and searches. |
| |
| * makeinfo/makeinfo.c (read_command): If HAVE_MACROS is defined, |
| then recognize and execute macros here. |
| (CommandTable): Add "macro" and "unmacro" to table if HAVE_MACROS |
| is defined. |
| |
| * makeinfo/makeinfo.c (cm_macro, cm_unmacro, execute_macro) |
| makeinfo/makeinfo.c (get_macro_args, find_macro, add_macro) |
| makeinfo/makeinfo.c (delete_macro, array_len, apply): |
| New functions implement macro facility if HAVE_MACROS is |
| defined. |
| |
| * makeinfo/macro.texi (new file): Examples of using the new macro |
| facility. |
| |
| Mon Jan 31 10:24:52 1994 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * makeinfo/makeinfo.c (executing_string): Restore global |
| declaration. |
| |
| Mon Jan 24 23:48:26 1994 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * texinfo.texi: Various typo fixes from Bob Chassell |
| <bob@gnu.ai.mit.edu>. |
| |
| Thu Jan 6 13:34:21 1994 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * texinfo.texi: Turned on smallbook format and @set smallbook. |
| |
| Wed Dec 15 20:08:43 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * info/filesys.h (DEFAULT_INFOPATH): Added /usr/local/info, |
| /opt/gnu/info, /usr/share/info, and /usr/local/share/info. |
| |
| Tue Dec 14 19:10:20 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * libtxi/Makefile.in (ALLOCA): Define from configure. |
| |
| Fri Dec 10 04:33:12 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/texi2dvi: Put under RCS control. |
| |
| Sun Dec 26 11:55:46 1993 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * info/session.c (info_numeric_digit_arg_loop): Fix doc string. |
| |
| * info/infodoc.c (create_internal_info_help_node): Print out list |
| of functions which have to keystroke equivalent if we support |
| NAMED_FUNCTIONS. |
| |
| * info/filesys.c (compress_suffixes): Add ".gz" for "gunzip" to |
| alist. |
| |
| * info/footnotes.c (make_footnotes_node): If refs[i] doesn't have |
| a nodename, then it couldn't be a reference to a footnote. |
| |
| * info/nodemenu.c (get_visited_nodes): Handle the case where |
| filter_func has left no possible buffers to select. |
| |
| Sat Dec 25 10:35:56 1993 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * info/infodoc.c (create_internal_info_help_node): Conditionalize |
| generation of the help node based on the #define |
| HELP_NODE_GETS_REGENERATED. When this is not set (the default) |
| the help node is generated exactly once, and is not gc'able. |
| Otherwise, a new node is always created for the help window, and |
| the old node gets garbage collected by the gc system. |
| (info_find_or_create_help_window): Conditionalize window node |
| selected based on the #define HELP_NODE_GETS_REGENERATED. |
| |
| * info/dir.c (add_menu_to_file_buffer): Place exactly one blank |
| line between directory entries. |
| |
| * info/info.c (version_string): Update minor version to "11". |
| |
| * info/info.h: Update comment to "2.11". |
| |
| * info/dir.c (maybe_build_dir_node): Only add the contents of a |
| new file if it is not identical to the file of the DIR buffer. |
| |
| * info/nodes.c (info_get_node): Call `maybe_build_dir_node' on |
| "dir" as well as "localdir" to mimic emacs-19.22 "dir" merging |
| behaviour. |
| |
| Fri Dec 3 13:41:44 1993 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * info/info-utils.c (canonicalize_whitespace): Suppress whitespace |
| found at the start of STRING. |
| |
| Sat Nov 20 14:00:50 1993 Brian J. Fox (bfox@hippie) |
| |
| * info/indices.c (DECLARE_INFO_COMMAND): Fix typo in assignment to |
| `old_offset' (= instead of ==). |
| |
| Tue Nov 2 12:22:40 1993 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * makeinfo/makeinfo.c (make_index_entries_unique): New function |
| makes a sorted array have all unique entries by appending numbers |
| to the ends of strings. |
| (sort_index): Call `make_index_entries_unique'. |
| |
| Mon Sep 20 12:04:05 1993 Brian J. Fox (bfox@ai.mit.edu) |
| |
| * makeinfo/makeinfo.c (get_execution_string): New Function returns |
| a pointer to an EXECUTION_STRING structure. |
| (execute_string): No longer uses a static string; call |
| `get_execution_string' instead in order to get a free buffer for |
| consing. |
| |
| Sun May 23 07:00:20 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * Texinfo 3.1 released. |
| |
| Sat May 22 18:21:27 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * info/info.c (info_patch_level): Increment constant to 1. |
| |
| * info/Makefile.in (DEFAULT_INFOPATH): Default definition deleted. |
| Makefile.in: Put it here instead. |
| * Makefile.in (MDEFINES): Add DEFAULT_INFOPATH. |
| |
| * configure.in: check for vfprintf and vsprintf. |
| |
| * makeinfo/makeinfo.c: Version 1.55. |
| |
| * makeinfo/makeinfo.c (add_word_args, execute_string) [HAVE_VARARGS_H]: |
| Don't use this definition unless HAVE_VSPRINTF is also defined. |
| (error, line_error, warning) [HAVE_VARARGS_H]: Don't use this |
| definition unless HAVE_VFPRINTF is also defined. |
| Remove indentation of all cpp directives, except for #pragma. |
| |
| Fri May 21 14:34:24 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * texinfo.texi: Rename to texi.texi. |
| Change @setfilenname and START-INFO-DIR-ENTRY to `texi.info'. |
| |
| * Makefile.in (MDEFINES): Pass LDFLAGS to sub-makes. |
| (realclean): Delete `configure'. |
| Changed all references to texinfo.info to texi.info |
| |
| * configure.in: Add AC_PROG_RANLIB, and AC_CONST. |
| Check for `rindex' function. |
| Check for varargs.h. |
| Clean up symbol names for header files so a single AC_HAVE_HEADERS |
| can be used. |
| (AC_INIT): Use texi.texi instead of makeinfo/makeinfo.c |
| |
| * info/info-utils.h: Copy definitions of bcopy, index, and rindex |
| (with appropriate #ifdef wrappers) from termdep.h. These are |
| included by a mutually exclusive set of files. |
| |
| * info/termdep.h [HAVE_SYS_PTEM]: Use HAVE_SYS_PTEM_H instead. |
| |
| * info/terminal.c, info/termdep.h [HAVE_TERMIO]: Use HAVE_TERMIO_H |
| instead. |
| |
| * info/makedoc.c, info/filesys.c [!O_RDONLY]: Include fcntl.h or |
| sys/fnctl.h, depending on whether HAVE_SYS_FCNTL_H is set. |
| |
| * info/termdep.h: Remove all indentation in #-exprs. |
| Remove old assumptions about bcopy, index, and rindex. |
| [HAVE_BCOPY]: Define bcopy. |
| [HAVE_RINDEX]: Define index and rindex. |
| |
| * info/nodes.c (info_get_node): Don't call stricmp if nodename is |
| NULL. Remove indentation in #-exprs. |
| |
| * info/echo_area.c (echo_area_stack_depth): Declare static. |
| |
| * info/Makefile.in (DEFAULT_INFOPATH): Make separate Makefile |
| variable so it can be overridden more easily by the user. Add `.' |
| to beginning of path. |
| (clean): Delete core.* (386bsd core files). |
| (MAKEDOC): Variable removed. Refer to `makedoc' explicitly. |
| (funs.h): Add `:' commands after if, to avoid spurious nonzero |
| exit statuses. |
| |
| * info/userdoc.texi: Improved comments explaining its purpose. |
| |
| * makeinfo/makeinfo.c [HAVE_VARARGS_H]: Include varargs.h. |
| (error, line_error, warning, add_word_args, |
| execute_string)[HAVE_VARARGS_H]: New versions that |
| use varargs. From bfox. |
| |
| * makeinfo/Makefile.in (clean): Delete core.* (386bsd core files). |
| |
| * util/Makefile.in (clean): Remove core.* (386bsd core files). |
| |
| * libtxi/Makefile.in: Remove all references to $(common). |
| (RANLIB): New variable, set from autoconf. |
| (libtxi.a): Use $(RANLIB) instead of `ranlib' in target rules. |
| (clean): Delete core.* (386bsd core files). |
| |
| Tue May 18 12:08:24 1993 Robert J. Chassell (bob at grackle.stockbridge.ma.us) |
| |
| * emacs/texinfmt.el (texinfo-format-refill): Do not fill a section |
| title line with the asterisks, hyphens, etc. that underline |
| it in any circumstance. |
| |
| Sun May 16 13:53:43 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/mkinstalldirs: handle relative pathnames. |
| |
| Fri May 14 20:18:49 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/mkinstalldirs: initialize IFS if unset. |
| |
| Tue May 11 06:33:14 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * makeinfo/makeinfo.c (cm_item): don't dereference item_func if NULL. |
| |
| Mon May 10 14:50:31 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * Texinfo 3.0 released. |
| |
| * Makefile.in (ALLOCA): Provide for substitution. |
| |
| Mon May 10 10:12:53 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * emacs/texinfmt.el (texinfmt-version): Updated year. |
| |
| Fri Apr 16 04:48:03 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * makeinfo/makeinfo.c: Version 1.54 from bfox. |
| |
| * util/fixfonts: Replace instances of `[..]' with `test'. |
| Use more portable `test' arguments: `z$foo = z' instead of `! $foo'. |
| Robustify quoting in eval assignments. |
| (textfmdir, texpkdir, texgfdir): Don't override definition from |
| environment, if any. |
| Trap EXIT, SIGHUP, SIGINT, SIGQUIT, SIGTERM to delete temp files |
| instead of trying to remove them explicitly before calling exit. |
| When changing cwd, do so in subshell, in case various tex*dir |
| variables are relative. |
| Don't use `head', `dirname', or `basename'. These don't behave |
| consistently and/or don't even exist on some systems. They can |
| all be emulated with `sed' anyway. |
| (tempfile2_line1): New variable. Use it instead of running |
| process to extract first line out of tempfile2 multiple times. |
| Eliminate some gratuitous uses of $tempfile2, such as in for loops. |
| |
| Fri Mar 26 23:25:13 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * texinfo.texi: @setfilename texinfo.info. |
| |
| * makeinfo/makeinfo.c (reader_loop, end_insertion): Fix typos in |
| comments. |
| (handle_variable_internal): Handle the case that there further |
| menu text after a false ifset/ifclear. |
| |
| * util/texi2dvi: Version 0.4 |
| Replace all instances of `[ ... ]' with `test'. |
| Updated bug-reporting address. |
| |
| Thu Mar 25 12:31:30 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * info/Makefile.in (install): Install info.1 man page. |
| (uninstall): Remove installed info.1 man page. |
| |
| * info/infoman.texi: Standalone manual renamed to info-stnd.texi. |
| Makefile.in: Targets updated appropriately. |
| |
| * info/Makefile.in (LDEFS): New variable. Use it for info-local |
| macros, since DEFS will be inherited from parent make and any |
| local definitions will get clobbered. |
| |
| * info/RELEASE: Renamed to info/NEWS. |
| |
| * README: New file. |
| |
| * Makefile.in (topclean): New target. |
| |
| * Getting-started: Renamed to INTRODUCTION. Former name is too |
| long (over 14 chars). |
| |
| * New-features: Renamed to NEWS. |
| |
| * Makefile.in (MDEFINES): Set it. |
| |
| * Makefile.in (dist): Use --gzip option to tar to make sure |
| resulting file is compressed with gzip. Change tar file |
| extension from `.Z' to `.z'. |
| |
| * Makefile.in (DISTFILES): Filter out any file or directory names |
| starting with `='. |
| |
| * fixfonts: Moved to util/fixfonts. |
| |
| * RELEASE: Deleted. |
| |
| * makeinfo/Makefile.in (VPATH): Use $(srcdir), not @srcdir@. |
| (common): Use ../libtxi, not ../common. |
| (makeinfo.in): Run makeinfo with --no-split. |
| |
| * makeinfo/makeinfo.texi: Changes from bob. |
| |
| * util/Makefile.in (VPATH): Use $(srcdir), not @srcdir@. |
| (common): Use ../libtxi, not ../common. |
| |
| * util/fixfonts: Moved from top-level directory. |
| |
| Wed Mar 24 10:21:31 1993 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-format-region): Do not require |
| `@setfilename' line; delete `\input texinfo' line if part of |
| region. |
| |
| * emacs/texinfmt.el (texinfo-raise-lower-sections): Raise or lower the |
| hierarchical level of chapters, sections, etc. according to |
| `@raisesections' and `@lowersections' commands. |
| |
| Thu Mar 18 16:02:27 1993 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfo.el (texinfo-show-structure): Indent *Occur* buffer |
| according to the structure of the file. |
| |
| Sat Mar 6 05:16:44 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/texi2dvi: use ${1+"$@"}, not just "$@". |
| |
| Tue Feb 2 08:38:06 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * info/Makefile.in: Replace all "--nosplit" arguments to makeinfo |
| with "--no-split" |
| |
| Sun Jan 31 18:16:58 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/texi2dvi: Don't put .dvi and related auxillary files in same |
| directory as source files. Put them in current directory instead. |
| (TEXINPUTS_orig): New variable. |
| (file_texi): Variable removed. |
| (filename_texi): New variable. |
| (command_line_filename): Use this wherever references to file_texi |
| occured except in setting filename_noext. |
| (TEXINPUTS): Current directory and source directory where input |
| file resides prepended to standard path before invoking TeX. |
| |
| Wed Jan 27 16:24:37 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/Makefile.in: overhauled. |
| |
| Tue Jan 26 21:04:23 1993 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * Makefile.in, info/Makefile.in, makeinfo/Makefile.in: Overhauled. |
| |
| * configure.in: Renamed from texinfo.in. |
| Incorporated makeinfo/makeinfo.in, info/info.in, and |
| util/util.in. Create all child Makefiles. |
| |
| * makeinfo/makeinfo.in, info/info.in: Deleted (incorporated into |
| top configure.in). |
| |
| * util/util.in: Deleted (incorporated into ../configure.in). |
| |
| Mon Jan 25 10:59:49 1993 Brian Fox (bfox@cubit) |
| |
| * info/info.c: New version 2.9; new variable INFO_PATCH_LEVEL |
| appears in the version string if it is non-zero. New function |
| version_string () produces the current version string, as in 2.8-p1. |
| |
| * info/dir.c: New file implements Gillespies `localdir' hacks. |
| |
| * info/nodes.c (info_get_node): Now calls maybe_build_dir_node () |
| if the file name to look for is "dir". |
| |
| * info/nodes.h: New flag N_CannotGC unconditionally prevents garbage |
| collection of a file buffer's contents. Used when "dir" is made |
| from at least one "localdir". |
| |
| Fri Jan 22 11:36:42 1993 Brian Fox (bfox@cubit) |
| |
| * info/footnotes.c: Do not declare auto_footnotes_p as "extern" in |
| this file. |
| |
| Thu Jan 21 08:57:08 1993 Brian Fox (bfox@cubit) |
| |
| * info/info.c: New version 2.8. |
| |
| * info/userdoc.texi, info/infoman.texi, info/info.texi: Fully |
| document Info; create both online and printed manual versions. |
| "userdoc.texi" contains exactly the documentation for GNU Info 2.x. |
| "infoman.texi" is a wrapper for that file; it is meant to produce |
| printed documentation. "info.texi" has the user documentation as a |
| complete chapter within itself, but continues to contain the Info |
| tutorial. |
| |
| * info/makedoc.c: Convert "ea_" into "echo_area_" when creating the |
| command name. |
| |
| Fri Jan 15 16:50:35 1993 Brian Fox (bfox@cubit) |
| |
| * info/search.c (skip_node_characters): New argument NEWLINES_OKAY if |
| non-zero says that newlines should be skipped over during parsing. |
| |
| * info/info-utils.c (info_parse_node): New argument NEWLINES_OKAY if |
| non-zero says that newlines should be skipped while parsing out |
| the nodename specification. |
| |
| Wed Jan 13 14:42:33 1993 Brian Fox (bfox@cubit) |
| |
| * info/makedoc.c: Remove "info_" from the front of the command name |
| before installing it. |
| |
| * info/session.c (info_menu_or_ref_item): A label of "Menu" is okay if |
| the builder is not info_menu_of_node (); |
| |
| * info/m-x.c: New function replace_in_documentation () replaces \\[foo] |
| with the keystrokes you type to get that command. Now used in |
| indices.c, info.c, infodoc.c. |
| |
| Mon Jan 11 10:27:41 1993 Brian Fox (bfox@cubit) |
| |
| * info/variables.c, h: New files contain describe-variable and stuff |
| moved out of m-x.c. |
| |
| * info/m-x.c: Move VARIABLE_ALIST and variable functions into |
| variables.c. Add documentation string to variable definition. |
| |
| * info/echo_area.c (push_echo_area): Zero the contents of |
| echo_area_completion_items after pushing the vars. |
| |
| Sat Jan 9 11:59:47 1993 Brian Fox (bfox@cubit) |
| |
| * info/Makefile.in: Add footnotes.c,h,o to the appropriate Makefile |
| variables. |
| |
| * info/window.c (window_tile_windows): New function divides the |
| available space among the visible windows. |
| |
| * info/session.c (info_tile_windows): New function calls |
| window_tile_windows. |
| |
| * info/footnotes.c, footnotes.h: New file implements functions for |
| aiding automatic footnote display when entering a node which has |
| footnotes. |
| |
| * info/m-x.c: New user-variable "automatic-footnotes". |
| |
| * info/window.c (window_physical_lines) New function counts the |
| carriage returns found in NODE. |
| |
| Wed Jan 6 11:24:19 1993 Brian Fox (bfox@cubit) |
| |
| * info/general.h: #include <unistd.h> if we have it. |
| |
| Tue Jan 5 11:12:33 1993 Brian Fox (bfox@cubit) |
| |
| * info/info-utils.c (info_concatenate_references): If either arg is |
| NULL, return the other arg. |
| |
| * info/indices.c (info_indices_of_file_buffer): Simplified and |
| corrected loop through tags/nodes of file buffer looking for |
| indices. |
| |
| * info/search.c (skip_node_characters): Rewrite "if" statement for |
| clarification and conciseness. |
| |
| Fri Jan 1 03:18:26 1993 Brian Fox (bfox@cubit) |
| |
| * info/info.in: Check for setvbuf (), and check to see whether the args |
| are reversed. |
| |
| * info/dribble.c (open_dribble_file) Check HAVE_SETVBUF and |
| SETVBUF_REVERSED when setting the buffering on info_dribble_file. |
| |
| Thu Dec 31 20:14:13 1992 Brian Fox (bfox@cubit) |
| |
| * info/session.c (info_select_reference) If the node couldn't be found, |
| look for the label as a filename (i.e., "(LABEL)Top"). |
| |
| Wed Dec 30 01:57:50 1992 Brian Fox (bfox@cubit) |
| |
| * New Version 2.7 Beta. |
| |
| * info/echo_area.c: Numerous functions now do something with the |
| numeric argument. Kill ring implemented, as well as yank and |
| yank_pop. Also transpose-chars. |
| |
| * info/window.c (window_make_modeline): Check node->flags for |
| N_IsCompressed and display "zz" in the modeline if the node comes |
| from a file which is compressed on disk. |
| |
| Mon Dec 28 17:33:12 1992 Brian Fox (bfox@cubit) |
| |
| * info/filesys.c, info/nodes.c: New member of FILE_BUFFER "FILESIZE" |
| contains the size of file_buffer->contents. finfo.st_size is no |
| longer relied upon to read the contents of files, since the new |
| function (filesys_read_info_file) can read compressed files. |
| |
| * info/filesys.c (info_find_fullpath) If a file starts with a slash (or |
| tilde expansion causes it to start with a slash) still call |
| info_find_file_in_path () on it so that we can find files with |
| compression suffixes. |
| |
| * info/m-x.c: New variable "gc-compressed-files". |
| |
| Tue Dec 22 03:45:28 1992 Brian Fox (bfox@cubit) |
| |
| * info/info.c: Version 2.6 Beta. |
| |
| * info/indices.c (info_index_next): Improve the final search for the |
| matched index entry. |
| |
| * info/session.c (move_to_screen_line): New function implements `M-r'. |
| Given a numeric argument, move point to the start of that line in |
| the current window; without an arg, move to the center line. |
| * infomap.c: Put move_to_screen_line () on `M-r'. |
| |
| * info/nodes.c (adjust_nodestart): Don't set N_UpdateTags unless the |
| node came from a tags table. |
| |
| * info/nodes.c (info_find_file_internal): If the filename being looked |
| for doesn't start with a `/', then additionally compare the |
| filename against the fullpath of the file buffer sans the |
| directory name. This can happen when selecting nodemenu items. |
| |
| Mon Dec 21 10:07:18 1992 Brian Fox (bfox@cubit) |
| |
| * info/session.c, info/display.c: Remove all references to |
| active_window_ch, active_window_cv, cursor_h, and cursor_v. The |
| single function display_cursor_at_point () is used for all cursor |
| movement, and to place the terminal's cursor at the right location |
| on the screen. |
| |
| Sat Dec 19 12:01:33 1992 Brian Fox (bfox@cubit) |
| |
| * info/nodemenu.c: New file implements a few functions for manipulating |
| previously visited nodes. `list-visited-nodes' produces a menu of |
| the nodes that could be reached by info_history_node () in some |
| window. `select-visited-node' is similar to `list-visited-node' |
| followed by `info-menu-item', but doesn't display a window with |
| the visited nodes menu. |
| |
| * info/session.c (info_numeric_arg_digit_loop): If redisplay had been |
| interrupted, then redisplay all of the windows while waiting for |
| input. |
| |
| * info/display.c (display_was_interrupted_p): New variable keeps track |
| of interrupted display. Used in |
| info/session.c:info_numeric_arg_digit_loop (). |
| |
| * info/session.c (info_global_next, info_global_prev): Use the numeric |
| argument passed to determine how many nodes to move. |
| |
| * info/session.c (info_scroll_forward, info_scroll_backward): If the |
| invoking key is not SPC or DEL only do Page Only scrolling. |
| |
| Thu Dec 17 01:34:22 1992 Brian Fox (bfox@cubit) |
| |
| * info/display.c (display_update_one_window): Allow W_NoWrap to affect |
| window display. |
| |
| * info/window.c (calculate_line_starts): Now takes a WINDOW * as an |
| argument, and simply does the calculation, placing the results |
| into window->line_starts and window->line_count. It also handles |
| W_NoWrap in window->flags. |
| |
| Mon Dec 14 02:18:55 1992 Brian Fox (bfox@cubit) |
| |
| * info/session.c (info_backward_scroll): Don't try to get previous node |
| if the top of the node isn't currently being displayed. |
| |
| * info/window.c (window_adjust_pagetop) Use new variable |
| "window_scroll_step" to attempt to control the amount which the |
| window scrolls. |
| |
| * info/m-x.c (info_variables) Add "scroll-step" to the list. |
| |
| Thu Dec 10 08:52:10 1992 Brian Fox (bfox@cubit) |
| |
| * info/m-x.c: New variable entry show-index-matches. When set to |
| non-zero the matched portion of the search string is indicated |
| with ` and '. Perhaps I should use `|' inst|ea|d? |
| |
| * info/echo_area.c (ea_possible_completions): Always build completions |
| before checking to see how many there were. |
| |
| * info/info-utils.c: (info_concatenate_references): New utility |
| function concatenates references. |
| |
| * info/Makefile.in: Add indices.c and indices.h to SRCS and HDRS. |
| Add indices.c to CMDFILES. |
| |
| * info/indices.c, info/indices.h: New file implements `i' and `,' |
| commands of info, and provides index searching capabilities. |
| |
| * info/echo_area.c (info_read_completing_in_echo_area): Split off into |
| separate callable function info_read_completing_internal (). |
| |
| * info/echo_area.c (info_read_maybe_completing): New function calls |
| info_read_completing_internal () with non-forcing argument. |
| |
| * info/session.c: Rename down_next_upnext_or_error () and |
| prev_up_or_error () to forward_move_node_structure (), and |
| backward_move_node_structure (). Implement new commands |
| info_global_next () and info_global_prev (). |
| |
| * info/infomap.c (initialize_info_keymaps): Bind `[' and `]' to |
| backward_, forward_move_node_structure () respectively. |
| |
| * info/session.c (info_menu_digit): Called with "0" as arg, select the |
| last menu item. |
| |
| * info/infomap.c (initialize_info_keymaps): "0" calls |
| info_menu_digit (). |
| |
| * info/session.c (info_move_to_xref): Take dir into account when there |
| are xrefs and menu items in the node and we are wrapping |
| backwards. |
| |
| Tue Dec 8 09:57:58 1992 Brian Fox (bfox@cubit) |
| |
| * info/info.c: Version 2.5 Beta. |
| |
| * info/terminal.c (terminal_insert_lines, terminal_delete_lines) Do not |
| expect tgoto to return a new string; it returns the address of a |
| static buffer. |
| |
| * info/infodoc.c (info_find_or_create_help_window) Correct check for |
| prior existing help node. |
| |
| * info/m-x.c (set_variable): Allow variables to have a list of choices. |
| Add new variable scroll-behaviour. |
| |
| * info/session.c (down_next_upnext_or_error, prev_up_or_error) New |
| functions implement user-controlled behaviour when attempting to |
| scroll past the bottom or top of a node. New variable |
| info_scroll_behaviour is user visible as "scroll-behaviour". |
| |
| * info/session.c (info_scroll_forward, info_scroll_backward) Call new |
| functions for user-controlled scroll behaviour. |
| |
| * info/terminal.c (terminal_initialize_terminal) Set PC from BC not |
| from BUFFER. |
| |
| Mon Dec 7 11:26:12 1992 Brian Fox (bfox@cubit) |
| |
| * util/texindex.c: Change EXIT_SUCCESS and EXIT_FATAL to TI_NO_ERROR |
| and TI_FATAL_ERROR respectively. This avoids namespace conflicts |
| on NeXT 2.0. |
| |
| Sat Dec 5 00:07:59 1992 Brian Fox (bfox@cubit) |
| |
| * info/info.c: New option "--subnodes" says to recursively dump the |
| menus of the nodes that you wish to dump. Menu items which point |
| to external nodes are not dumped, and no node is dumped twice. |
| |
| Thu Dec 3 16:11:02 1992 Brian Fox (bfox@cubit) |
| |
| * info/session.c (info_error) Don't ring the bell if |
| info_error_rings_bell_p is zero. (info_abort_key) Ring the bell |
| if printing "Quit" in the echo area wouldn't do it. |
| |
| * info/m-x.c (set_variable) New functions allows setting of |
| variables in the echo area. Currently, only visilble-bell and |
| errors-ring-bell are implemented. |
| |
| Wed Dec 2 13:11:37 1992 Brian Fox (bfox@cubit) |
| |
| * info/nodes.c, info/makedoc.c: If O_RDONLY is not defined by |
| sys/file.h, include sys/fcntl.h. |
| |
| * info/filesys.c (info_file_in_path): Expand leading tildes found |
| within directory names. |
| |
| * info/terminal.c (terminal_initialize_terminal) Set ospeed to 13 if |
| not settable any other way. It is an index into an array of |
| output speeds. |
| |
| * info/display.c (free_display) Do not free a NULL display. |
| |
| * info/display.c (string_width): New functions returns the width of |
| STRING when printed at HPOS. |
| |
| Sun Nov 29 01:24:42 1992 Brian Fox (bfox@cubit) |
| |
| * info/info.c: New version 2.4 beta. |
| |
| * info/general.h: #define info_toupper and info_tolower which check |
| their arguments before performing any conversion. |
| |
| * info/search.c, info/echo_area.c: Use info_toupper. |
| |
| Sat Nov 28 14:23:24 1992 Brian Fox (bfox@cubit) |
| |
| * info/session.c (info_scroll_forward, info_scroll_backward) If at |
| last/first page of the node, and the last command was |
| forward/backward, do info_next/prev/_node. |
| |
| * info/session.c: New function info_select_reference_this_line gets |
| menu or cross reference immediately. |
| |
| * info/infomap.c (initialize_info_keymaps): Add info_keymap[LFD] to |
| invoke info_select_reference_this_line (). |
| |
| * info/session.c (info_last_reference) Rename to |
| info_history_reference. Wrote info_last_reference, and |
| info_first_reference which go to the last or first node of an info |
| file. |
| |
| Fri Nov 27 00:59:02 1992 Brian Fox (bfox@cubit) |
| |
| * info/info.c: New version 2.3. Completed implementing contents of |
| TODO file. |
| |
| * info/session.c (info_redraw_display): Fix C-l with numeric arg. |
| |
| Thu Nov 26 20:14:18 1992 Brian Fox (bfox@cubit) |
| |
| * info/m-x.c: New file implements reading named commands in the echo |
| area, along with a new function "info-set-screen-height". |
| Compilation of this file and some code in others controlled by the |
| Makefile variable NAMED_COMMANDS (set to -DNAMED_COMMANDS). |
| |
| * info/window.c (window_new_screen_size) Rewrite from scratch, allowing |
| clean growth and shrinkage of the screen. New variable |
| window_deletion_notifier is a pointer to a function to call when |
| the screen changes size, and some windows have to get deleted. |
| The function is called with the window to be deleted as an |
| argument, and it should clean up dangling references to that |
| window. |
| |
| * info/session.c (initialize_info_session): Set |
| window_deletion_function to forget_window_and_nodes. |
| |
| * info/display.c (display_update_one_window): If the first row of the |
| window to display wouldn't appear in the_screen, don't try to |
| display it. This happens when the screen has been made |
| unreasonably small, and we attempt to display the echo area. |
| |
| Tue Nov 24 00:47:20 1992 Brian Fox (bfox@cubit) |
| |
| * Release Info 2.2. |
| |
| * info/session.c: New functions implement reading typeahead and |
| implement C-g flushing typed ahead characters. |
| (info_search_internal): allows C-g to exit multi-file searches. |
| |
| Mon Nov 23 01:53:35 1992 Brian Fox (bfox@cubit) |
| |
| * info/nodes.c: Remove calls to sscanf (), replacing them with calls to |
| atol (), since that is much faster. |
| (get_nodes_of_tags_table) Only check for "(Indirect)" if we |
| haven't parsed any nodes out of the tags table. Increase the |
| amount that file_buffer->nodes grows to 100 from 50. These two |
| together sufficiently speed up the parsing process. |
| |
| * info/nodes.c: info_get_node_of_file_buffer_tags (), |
| info_get_node_of_file_buffer_nodes (): Search the appropriate list |
| and return a node. This was simply a cut and paste edit to |
| functionalize the code. |
| |
| * info/TODO: Remove suggestion for partial tag parsing, since tag |
| parsing is much faster now. |
| |
| Sat Nov 21 02:48:23 1992 Brian Fox (bfox@cubit) |
| |
| * info/makedoc.c: New File replaces makedoc.sh shell script. |
| |
| * info/infomap.c: Install info_isearch (on C-s) and |
| info_reverse_isearch (on C-r) for Info windows. |
| |
| * info/session.c (incremental_search, info_isearch, |
| info_reverse_isearch) New functions implement incremental |
| searching. |
| |
| Fri Nov 20 00:01:35 1992 Brian Fox (bfox@cubit) |
| |
| * info/terminal.c (terminal_initialize_terminal): Declare and set up |
| `ospeed'. Turn off C-s and C-q processing. |
| |
| * info/session.c (info_show_point) When this function is called, the |
| desired result is to show the point immediately. So now it calls |
| set_window_pagetop () if the new pagetop is not the same as the |
| old one. This means that info_prev_line (), info_next_line (), |
| info_forward_word (), and info_backward_word () can all scroll the |
| window if they have to. |
| |
| Thu Nov 19 12:27:07 1992 Brian Fox (bfox@cubit) |
| |
| * info/session.c (set_window_pagetop): Add scrolling to make this |
| faster. |
| |
| * info/echo_area.c (push/pop_echo_area): Remember the list of items to |
| complete over. |
| |
| * info/session.c (info_forward_char): Don't let point get equal to |
| nodelen, only to nodelen - 1. |
| |
| * info/display.c: New function display_scroll_display () scrolls the |
| rmembered display as well as the text on the actual display. |
| |
| * info/terminal.c: New functions terminal_scroll_terminal (), |
| terminal_scroll_down (), and terminal_scroll_up (). All |
| implemented using "al" and "dl" termcap capabilities. (i.e., |
| insert and delete line). |
| |
| Wed Nov 18 15:05:14 1992 Brian Fox (bfox@cubit) |
| |
| * info/termdep.h: Only define HAVE_FCNTL_H if !aix and !ultrix. |
| |
| Tue Nov 17 20:35:08 1992 Brian Fox (bfox@cubit) |
| |
| * First Beta Release of Info 2.0. |
| |
| Sun Nov 1 02:21:05 1992 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/texi2dvi (--force): Option removed. Always run tex at least |
| once, don't bother checking if .dvi file is newer than source. |
| |
| Fri Oct 30 02:16:28 1992 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/texi2dvi (-D): debugging option renamed from '-d'. |
| Made check to enable debugging more terse. |
| When checking if index files have changed, use |
| variable $this_file instead of $file in for loop. |
| (file_texi): wherever the variable $file was used to reference |
| the texinfo file, substituted $file_texi. |
| |
| Sat Oct 17 07:30:34 1992 Brian J. Fox (bfox@helios) |
| |
| * util/texindex.c: Remove references to USG replacing them with a |
| define declaring the actual feature required or missing. |
| |
| Thu Oct 15 16:17:47 1992 Robert J. Chassell (bob@nutrimat.gnu.ai.mit.edu) |
| |
| * emacs/texinfmt.el (texinfo-format-setfilename): Remove date from |
| Info file header so regression testing is easier. |
| |
| Tue Sep 15 16:28:35 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfmt-version): New variable. |
| (texinfo-format-setfilename): Include date and |
| version in Info file header. |
| Better documentation for @definfoenclose |
| Handle whitespace after @end iftex, etc. |
| |
| Thu Sep 3 09:25:37 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-upd.el: Fix typo re `texinfo-sequential-node-update.' |
| |
| Tue Aug 18 08:56:24 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-value): Revise syntax. |
| |
| * emacs/texnfo-upd.el (texinfo-start-menu-description): |
| New function to insert title as description in a menu. |
| (texinfo-make-menu-list): Remove automatic title insertion. |
| |
| * emacs/texinfo.el (texinfo-mode-map): Add keybinding for |
| texinfo-start-menu-description. |
| |
| Wed Jul 29 11:58:53 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-set): Revise to set a string to the flag. |
| (texinfo-value): @value{flag}: New command which inserts the |
| string to which the flag is set. |
| |
| Tue Jul 7 15:10:52 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-upd.el (texinfo-master-menu): Error message if file |
| contains too few nodes for a master menu. |
| (texinfo-insert-master-menu-list): Only attempt to insert detailed |
| master menu if there is one. |
| |
| Wed Jun 10 15:26:18 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-append-refill): Refill properly when lines |
| begin with within-paragraph @-commands. |
| |
| Tue Jun 9 12:28:11 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el: Add `texinfo-deffn-formatting-property' and |
| `texinfo-defun-indexing-property' to @deffn commands. |
| |
| Mon Jun 8 11:52:01 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-upd.el: Replace `(mark-whole-buffer)' with |
| `(push-mark (point-max) t) (goto-char (point-min))' |
| to avoid `Mark set' messages. |
| |
| Fri Jun 5 15:15:16 1992 Robert J. Chassell (bob@kropotkin.gnu.ai.mit.edu) |
| |
| * emacs/texnfo-upd.el (texinfo-check-for-node-name): Offer section |
| title as prompt. |
| (texinfo-copy-next-section-title): Copy title correctly. |
| |
| Thu May 28 20:34:17 1992 Robert J. Chassell (bob@hill.gnu.ai.mit.edu) |
| |
| * emacs/texinfmt.el: @vtable defined, parallel to @ftable, for |
| variables. |
| (texinfo-append-refill): set case-fold-search nil so @TeX is not |
| confused with @tex. |
| |
| Thu Mar 26 21:36:41 1992 Robert J. Chassell (bob@kropotkin.gnu.ai.mit.edu) |
| |
| * emacs/makeinfo.el: Rename temp buffer from `*Makeinfo*' back to |
| `*compilation*' so `next-error' works; unfortunately, |
| `*compilation*' is written into the code as the name |
| `next-error' needs. |
| Rename `makeinfo-recenter-makeinfo-buffer' back to |
| `makeinfo-recenter-makeinfo-buffer' |
| |
| Thu May 14 21:14:25 1992 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/fixfonts: Enclosed most variable references with "" to prevent |
| potential globbing and other weirdness. Eliminated uses of |
| ${var-value}, which unfortunately isn't portable. |
| |
| * util/texi2dvi: rewritten from scratch. |
| |
| Sat Apr 18 23:46:25 1992 Charles Hannum (mycroft@hal.gnu.ai.mit.edu) |
| |
| * util/fixfonts: Re-evaluate prefix and libdir if inherited (to resolve |
| variable references from make). |
| (texlibdir): Don't add '/tex', since it's already there. |
| |
| Fri Apr 10 14:51:23 1992 Noah Friedman (friedman@prep.ai.mit.edu) |
| |
| * util/fixfonts: set prefix and libdir only if they are not already |
| defined (i.e. not inherited from the environment). |
| Changed default path for libdir to be consistent with Makefile. |
| |
| Tue Mar 3 13:17:42 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-upd.el (texinfo-insert-master-menu-list): Insert a |
| master menu only after `Top' node and before next node. |
| (texinfo-copy-menu): Error message if menu empty. |
| |
| Mon Feb 24 15:47:49 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-format-region): Make sure region ends in a |
| newline. |
| (texinfo-itemize-item): Recognize all non-whitespace on same line |
| as @item command. |
| |
| Sat Feb 22 02:15:00 1992 Brian Fox (bfox at gnuwest.fsf.org) |
| |
| * util/texindex.c: New version 1.45 has cleanups, should compile under |
| VMS quietly. |
| |
| Wed Feb 12 10:50:51 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/makeinfo.el: Rename temp buffer as *Makeinfo*. |
| Rename `makeinfo-recenter-compilation-buffer'. |
| (makeinfo-buffer): Offer to save buffer if it is modified. |
| (makeinfo-compile): Do not offer to save other buffers. |
| (makeinfo-compilation-sentinel): Switch to Info file. |
| |
| Tue Feb 4 13:07:39 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-print-index): Format so that node names in |
| the index are lined up. |
| |
| Mon Feb 3 09:08:14 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-itemize-item): Format entry when text |
| is on the same line as @item command. Also, handle @-commands. |
| (texinfo-format-region, texinfo-format-buffer-1): Set fill column |
| to local value of Texinfo buffer. |
| |
| * emacs/texnfo-upd.el (texinfo-pointer-name): Find only those |
| section commands that are accompanied by `@node' lines. |
| |
| Tue Jan 14 16:10:16 1992 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-upd.el: Ensure that no commands depend on the value of |
| case-fold-search. |
| |
| Fri Jan 10 15:13:55 1992 Robert J. Chassell (bob at kropotkin) |
| |
| * emacs/texinfmt.el (texinfo-append-refill): Replace use of |
| unsupported function `looking-at-backward' with |
| `re-search-backward'. |
| |
| Mon Dec 23 23:46:42 1991 David J. MacKenzie (djm at wookumz.gnu.ai.mit.edu) |
| |
| * util/texindex.c: Change POSIX ifdefs to HAVE_UNISTD_H and |
| _POSIX_VERSION. |
| |
| Mon Dec 16 15:01:36 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-append-refill): New function appends |
| @refill to all appropriate paragraphs so you no longer need to |
| append @refill command yourself. |
| (texinfo-format-region, texinfo-format-buffer-1, |
| texinfo-format-include): Call `texinfo-append-refill'. |
| |
| Fri Dec 6 01:25:09 1991 David J. MacKenzie (djm at wookumz.gnu.ai.mit.edu) |
| |
| * util/texindex.c: Conditionalize on _AIX (which is predefined) instead |
| of AIX, just like makeinfo does. |
| |
| Tue Nov 26 10:21:04 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-upd.el (texinfo-section-types-regexp): `@subtitle' no |
| longer treated as subsection. |
| |
| Sat Nov 16 08:27:42 1991 Richard Stallman (rms at mole.gnu.ai.mit.edu) |
| |
| * util/fixfonts: New file, from Karl Berry. |
| |
| Tue Nov 12 16:13:24 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el: Create @end smalllisp. |
| |
| Mon Nov 11 16:50:13 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfo.el (texinfo-environment-regexp): Add all other block |
| enclosing Texinfo commands. |
| |
| Thu Nov 7 10:23:51 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfo.el (texinfo-insert-@end): Attempt to insert correct end |
| command statement, eg, @end table. Fails with nested lists. |
| (texinfo-insert-*): Accept prefix arg to surround following N |
| words with braces for command. |
| |
| Thu Oct 31 21:31:41 1991 Robert J. Chassell (bob at kropotki) |
| |
| * emacs/texinfmt.el (texinfo-clear): Clear flag even if flag not |
| previously set. |
| |
| Wed Oct 23 11:15:58 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfo.el (texinfo-mode): page-delimiter now finds top node as |
| well as chapters. |
| |
| Tue Oct 22 11:46:12 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-do-flushright): Test whether a line is too |
| long for the flush right command (line length must be less than |
| the value of fill column). |
| |
| * emacs/texnfo-tex.el (texinfo-tex-buffer): Prompt for original file |
| even if point moved to *texinfo-tex-shell*. |
| texinfo-tex-original-file: variable to hold file name. |
| |
| Wed Oct 16 08:32:05 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-format-center): Expand string before |
| centering so @-commands not included. |
| |
| Thu Oct 10 22:01:47 1991 Robert J. Chassell (bob at kropotki) |
| |
| * emacs/texnfo-tex.el (texinfo-show-tex-print-queue): Do not kill a |
| running process; do start a process none exists. |
| |
| Thu Sep 26 21:58:47 1991 Robert J. Chassell (bob at kropotki) |
| |
| * util/texi2dvi: Misc. bugs fixed. |
| |
| * emacs/texinfo.el: Remove extraneous references to TeX. |
| |
| Thu Sep 19 20:45:29 1991 Robert J. Chassell (bob at kropotki) |
| |
| * emacs/texinfmt.el: add @cartouche as a noop (makes box with rounded |
| corners in TeX) |
| |
| Tue Sep 10 20:44:57 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-upd.el (texinfo-make-one-menu): Copy node-name correctly |
| for message. |
| |
| Thu Aug 29 17:54:07 1991 Robert J. Chassell (bob at kropotki) |
| |
| * emacs/texnfo-tex.el (texinfo-quit-tex-job): Do not set mark. |
| |
| Wed Aug 21 10:36:21 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-upd.el: (texinfo-copy-menu-title): Copy title as it |
| should rather than node line. |
| |
| Mon Aug 5 15:27:12 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el (texinfo-format-convert): Changed regexp that |
| looks for three hyphens in a row to find those between word |
| constituent characters, as now, for Oxford Univ. style dashes and |
| also between spaces, for Cambridge Univ. Press style dashes. |
| |
| * emacs/texnfo-tex.el (texinfo-tex-start-shell): Runs "/bin/sh" so |
| `explicit-shell-file-name' is not set globally. |
| |
| * emacs/texnfo-upd.el: Rewrite messages. |
| (texinfo-find-higher-level-node): Stop search at limit. |
| (texinfo-copy-menu-title): Rewrite to handle outer include files. |
| (texinfo-multi-file-update): Update all nodes properly; |
| rewrite doc string and interactive. |
| |
| Sat Aug 3 10:46:13 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-upd.el (texinfo-all-menus-update): Fixed typo that |
| caused the function to create a master menu when it shouldn't. |
| |
| * emacs/texinfo.el (texinfo-mode): Make `indent-tabs-mode' a local |
| variable and set to nil to prevent TABs troubles with TeX. |
| |
| Wed Jul 31 11:07:08 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texnfo-tex.el (texinfo-quit-tex-job): New function: quit |
| currently running TeX job, by sending an `x' to it. |
| (texinfo-tex-shell-sentinel): New function to |
| restart texinfo-tex-shell after it is killed. |
| (texinfo-kill-tex-job): Rewrite to use kill-process rather than |
| quit-process; uses `texinfo-tex-shell-sentinel' to restart |
| texinfo-tex-shell after it is killed. |
| (texinfo-tex-region, texinfo-tex-buffer): Replace |
| texinfo-kill-tex-job with quit-process. |
| |
| * emacs/texinfo.el (texinfo-define-common-keys): Add keybinding for |
| texinfo-quit-tex-job |
| |
| Wed Jul 10 15:15:03 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el: New commands @set, @clear, @ifset...@end |
| ifset, and @ifclear...@end ifclear. |
| Definition functions rewritten to make them easier to |
| maintain. |
| |
| Wed Jul 3 19:37:04 1991 Robert J. Chassell (bob at kropotki) |
| |
| * emacs/texinfmt.el (texinfo-format-deftypefn-index): Remove reference |
| to data-type to make consistent with texinfo.tex and makeinfo. |
| texinfo.el: Fix page-delimiter and texinfo-chapter-level-regexp |
| variables. |
| |
| Thu Jun 27 18:35:36 1991 Robert J. Chassell (bob at nutrimat) |
| |
| * emacs/texinfmt.el: Add @dmn as `texinfo-format-noop'. |
| texinfo2.texi: Document @dmn. |
| texinfmt.el (texinfo{,-end}-{eleterate,ecapitate} renamed |
| {alphaenumerate, capsenumerate}. |
| |
| Fri Jun 14 12:46:32 1991 Robert J. Chassell (bob at churchy.gnu.ai.mit.edu) |
| |
| * emacs/texinfmt.el (texinfo-format-defun-1): @defivar prints name |
| correctly. |
| |
| Thu Jun 6 21:38:33 1991 Robert J. Chassell (bob at churchy.gnu.ai.mit.edu) |
| |
| * emacs/texinfo.el (texinfo-mode): Set page delimiter to |
| 'texinfo-chapter-level-regexp' so that page commands work by |
| chapter or equivalent. |
| |
| * emacs/texinfmt.el (texinfo-format-defun-1): @defop prints name |
| correctly. |
| (batch-texinfo-format): replace unsupported |
| 'buffer-disable-undo' with 'buffer-flush-undo' |
| |
| Fri Apr 5 15:17:17 1991 Robert J. Chassell (bob at wookumz.gnu.ai.mit.edu) |
| |
| * emacs/makeinfo.el (makeinfo-compilation-sentinel): Check for |
| existance of makeinfo-temp-file to avoid harmless error message. |
| texinfo2.texi: Minor typos fixed. |
| |
| Thu Mar 28 19:13:24 1991 Robert J. Chassell (bob at pogo.gnu.ai.mit.edu) |
| |
| * util/texi2dvi: Revised. |
| |
| Mon Mar 11 12:35:51 1991 Robert J. Chassell (bob at grackle) |
| |
| * emacs/texinfmt.el: (@footnotestyle): New command to set |
| footnotestyle. |
| (@paragraphindent): New command to set indentation. |
| (texinfo-format-refill): Add indentation feature so as to |
| indent paragraph or leave indentation asis before refilling |
| according to value set by @paragraphindent command. |
| (texinfo-format-region): Insert header, if any, into Info buffer. |
| (texinfo-format-separate-node, texinfo-format-end-node): Run |
| texinfo-format-scan on footnote text only once. |
| (texinfo-format-scan): Shorten `---' to `--'. |
| |
| * emacs/texinfo.el: Define key for `texinfo-master-menu'; define |
| start and end of header expressions. |
| |
| * emacs/texnfo-upd.el (texinfo-all-menus-update): Update |
| pre-existing master menu, if there is one. |
| |
| Fri May 11 14:36:07 1990 Richard Stallman (rms at sugar-bombs.ai.mit.edu) |
| |
| * util/texindex.c: Rename `lines' to `nlines'. |
| (bzero): Pass arg to lib$movc5 through non-register var. |
| (perror_with_file, pfatal_with_file): Move extern decls and includes |
| to top of file. |
| [VMS]: If not using VMS C, define away `noshare' keyword. |
| Include perror.h. |
| |
| Mon Jul 11 18:02:29 1988 Chris Hanson (cph at kleph) |
| |
| * util/texindex.c (indexify): when comparing to initial strings to |
| decide whether to change the header, must use `strncmp' to avoid |
| comparing entire strings of which initials are a substring. |
| |
| Sun Jun 26 18:46:16 1988 Richard Stallman (rms at sugar-bombs.ai.mit.edu) |
| |
| * util/texindex.c (sort_in_core, sort_offline, parsefile): |
| Give up on input file if any line doesn't start with backslash. |