| # Makefile for GNU C compiler. |
| # Copyright (C) 1987, 88, 90-98, 1999 Free Software Foundation, Inc. |
| |
| #This file is part of GNU CC. |
| |
| #GNU CC is free software; you can redistribute it and/or modify |
| #it under the terms of the GNU General Public License as published by |
| #the Free Software Foundation; either version 2, or (at your option) |
| #any later version. |
| |
| #GNU CC is distributed in the hope that it will be useful, |
| #but WITHOUT ANY WARRANTY; without even the implied warranty of |
| #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| #GNU General Public License for more details. |
| |
| #You should have received a copy of the GNU General Public License |
| #along with GNU CC; see the file COPYING. If not, write to |
| #the Free Software Foundation, 59 Temple Place - Suite 330, |
| #Boston MA 02111-1307, USA. |
| |
| # The targets for external use include: |
| # all, doc, proto, install, install-cross, install-cross-rest, |
| # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean, |
| # stage1, stage2, stage3, stage4. |
| |
| # Suppress smart makes who think they know how to automake Yacc files |
| .y.c: |
| |
| # Directory where sources are, from where we are. |
| srcdir = @srcdir@ |
| VPATH = @srcdir@ |
| |
| # Variables that exist for you to override. |
| # See below for how to change them for certain systems. |
| |
| # List of language subdirectories. |
| # This is overridden by configure. |
| SUBDIRS =@subdirs@ |
| |
| # Selection of languages to be made. |
| # This is overridden by configure. |
| CONFIG_LANGUAGES = @all_languages@ |
| LANGUAGES = c proto gcov$(exeext) $(CONFIG_LANGUAGES) |
| |
| # Languages should create dependencies of $(INTL_TARGETS) on generated |
| # sources in Make-lang.in. Example: |
| # $(INTL_TARGETS): $(srcdir)/cp/parse.c |
| INTL_TARGETS = intl.all intl.install intl.distdir |
| |
| # Selection of languages to be made during stage1 build. |
| # This is overridden by configure. |
| BOOT_LANGUAGES = c @all_boot_languages@ |
| |
| ALLOCA = |
| ALLOCA_FLAGS = |
| ALLOCA_FINISH = true |
| |
| # Various ways of specifying flags for compilations: |
| # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2. |
| # BOOT_CFLAGS is the value of CFLAGS to pass |
| # to the stage2 and stage3 compilations |
| # WARN_CFLAGS are the warning flags to pass to stage2 and stage3. |
| # (And for stage 1 if the native compiler is GCC.) It is |
| # separate from BOOT_CFLAGS because people tend to override optimization |
| # flags and we'd like them to still have warnings turned on. They are free |
| # to explicitly turn warnings off if they wish. |
| # XCFLAGS is used for most compilations but not when using the GCC just built. |
| # TCFLAGS is used for compilations with the GCC just built. |
| XCFLAGS = |
| TCFLAGS = |
| CFLAGS = -g @stage1_warn_cflags@ |
| BOOT_CFLAGS = -O2 $(CFLAGS) |
| WARN_CFLAGS = -W -Wall |
| # These exists to be overridden by the x-* and t-* files, respectively. |
| X_CFLAGS = |
| T_CFLAGS = |
| |
| X_CPPFLAGS = |
| T_CPPFLAGS = |
| |
| AWK = @AWK@ |
| CC = @CC@ |
| # srcdir might be a relative pathname which won't be valid in a subdirectory, |
| # so we must use objdir/srcdir instead to make it safe. objdir is always |
| # a full pathname. |
| BISON = `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \ |
| /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \ |
| *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \ |
| esac; else echo bison ; fi` |
| BISONFLAGS = |
| LEX = `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi` |
| LEXFLAGS = |
| AR = ar |
| AR_FLAGS = rc |
| LN = @symbolic_link@ |
| DLLTOOL = dlltool |
| SHELL = /bin/sh |
| # on sysV, define this as cp. |
| INSTALL = @INSTALL@ |
| # Some systems may be missing symbolic links, regular links, or both. |
| # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate. |
| LN=@LN@ |
| LN_S=@LN_S@ |
| # These permit overriding just for certain files. |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| MAKEINFO = `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \ |
| then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \ |
| else echo makeinfo ; fi` |
| MAKEINFOFLAGS = |
| TEXI2DVI = texi2dvi |
| # For GNUmake: let us decide what gets passed to recursive makes. |
| MAKEOVERRIDES = |
| @SET_MAKE@ |
| |
| # Define this as & to perform parallel make on a Sequent. |
| # Note that this has some bugs, and it seems currently necessary |
| # to compile all the gen* files first by hand to avoid erroneous results. |
| P = |
| |
| # How to invoke ranlib. |
| RANLIB = ranlib |
| # Test to use to see whether ranlib exists on the system. |
| RANLIB_TEST = \ |
| [ -f $(RANLIB) ] \ |
| || [ -f /usr/bin/ranlib -o -f /bin/ranlib ] |
| |
| # Compiler to use for compiling libgcc1.a. |
| # OLDCC should not be the GNU C compiler, |
| # since that would compile typical libgcc1.a functions such as mulsi3 |
| # into infinite recursions. |
| OLDCC = cc |
| |
| # CFLAGS for use with OLDCC, for compiling libgcc1.a. |
| # NOTE: -O does not work on some Unix systems! |
| CCLIBFLAGS = -O |
| |
| # Version of ar to use when compiling libgcc1.a. |
| OLDAR = ar |
| OLDAR_FLAGS = qc |
| |
| # Target to use when installing include directory. Either |
| # install-headers-tar or install-headers-cpio. |
| INSTALL_HEADERS_DIR = @build_install_headers_dir@ |
| |
| # Header files that are made available under the same name |
| # to programs compiled with GCC. |
| USER_H = $(srcdir)/ginclude/stdarg.h $(srcdir)/ginclude/stddef.h \ |
| $(srcdir)/ginclude/varargs.h $(srcdir)/ginclude/va-alpha.h \ |
| $(srcdir)/ginclude/va-h8300.h $(srcdir)/ginclude/va-i860.h \ |
| $(srcdir)/ginclude/va-i960.h $(srcdir)/ginclude/va-mips.h \ |
| $(srcdir)/ginclude/va-m88k.h $(srcdir)/ginclude/va-mn10200.h \ |
| $(srcdir)/ginclude/va-mn10300.h $(srcdir)/ginclude/va-pa.h \ |
| $(srcdir)/ginclude/va-pyr.h $(srcdir)/ginclude/va-sparc.h \ |
| $(srcdir)/ginclude/va-clipper.h $(srcdir)/ginclude/va-spur.h \ |
| $(srcdir)/ginclude/va-m32r.h $(srcdir)/ginclude/va-sh.h \ |
| $(srcdir)/ginclude/va-v850.h $(srcdir)/ginclude/va-arc.h \ |
| $(srcdir)/ginclude/iso646.h $(srcdir)/ginclude/va-ppc.h \ |
| $(srcdir)/ginclude/va-c4x.h $(EXTRA_HEADERS) $(LANG_EXTRA_HEADERS) \ |
| $(srcdir)/ginclude/proto.h $(srcdir)/ginclude/stdbool.h |
| |
| # Target to use whe installing assert.h. Some systems may |
| # want to set this empty. |
| INSTALL_ASSERT_H = install-assert-h |
| |
| # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test. |
| # Usually the one we just built. |
| # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS). |
| GCC_FOR_TARGET = ./xgcc -B./ -B$(build_tooldir)/bin/ |
| |
| # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET. |
| # It omits XCFLAGS, and specifies -B./. |
| # It also specifies -I./include to find, e.g., stddef.h. |
| GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include $(TCFLAGS) |
| |
| # Sed command to transform gcc to installed name. Overwritten by configure. |
| program_transform_name = @program_transform_name@ |
| program_transform_cross_name = s,^,$(target_alias)-, |
| |
| build_canonical = @build_canonical@ |
| host_canonical = @host_canonical@ |
| |
| # Tools to use when building a cross-compiler. |
| # These are used because `configure' appends `cross-make' |
| # to the makefile when making a cross-compiler. |
| |
| # Use the tools from the build tree, if they are available. |
| |
| # objdir is set by configure. |
| objdir = @objdir@ |
| |
| AR_FOR_TARGET = ` \ |
| if [ -f $(objdir)/../binutils/ar ] ; then \ |
| echo $(objdir)/../binutils/ar ; \ |
| else \ |
| if [ "$(host_canonical)" = "$(target)" ] ; then \ |
| echo ar; \ |
| else \ |
| t='$(program_transform_name)'; echo ar | sed -e $$t ; \ |
| fi; \ |
| fi` |
| AR_FLAGS_FOR_TARGET = rc |
| RANLIB_FOR_TARGET = ` \ |
| if [ -f $(objdir)/../binutils/ranlib ] ; then \ |
| echo $(objdir)/../binutils/ranlib ; \ |
| else \ |
| if [ "$(host_canonical)" = "$(target)" ] ; then \ |
| echo ranlib; \ |
| else \ |
| t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \ |
| fi; \ |
| fi` |
| RANLIB_TEST_FOR_TARGET = \ |
| [ -f $(RANLIB_FOR_TARGET) ] \ |
| || ( [ "$(host_canonical)" = "$(target)" ] \ |
| && [ -f /usr/bin/ranlib -o -f /bin/ranlib ] ) |
| |
| # Dir to search for system headers. Overridden by cross-make. |
| SYSTEM_HEADER_DIR = /usr/include |
| |
| # Control whether to run fixproto. |
| STMP_FIXPROTO = stmp-fixproto |
| |
| # Test to see whether <limits.h> exists in the system header files. |
| LIMITS_H_TEST = [ -f $(SYSTEM_HEADER_DIR)/limits.h ] |
| |
| # There may be a premade insn-attrtab.c for this machine. |
| # (You could rebuild it with genattrtab as usual, but it takes a long time.) |
| # PREMADE_ATTRTAB is the file name of the file to use. |
| # PREMADE_ATTRTAB_MD is the md file it corresponds to. |
| PREMADE_ATTRTAB_MD = Makefile # Guaranteed not to cmp equal to md. |
| PREMADE_ATTRTAB = |
| |
| target=@target@ |
| target_alias=@target_alias@ |
| xmake_file=@dep_host_xmake_file@ |
| tmake_file=@dep_tmake_file@ |
| out_file=$(srcdir)/config/@out_file@ |
| out_object_file=@out_object_file@ |
| md_file=$(srcdir)/config/@md_file@ |
| tm_file=@tm_file_list@ |
| build_xm_file=@build_xm_file_list@ |
| host_xm_file=@host_xm_file_list@ |
| lang_specs_files=@lang_specs_files@ |
| lang_options_files=@lang_options_files@ |
| lang_tree_files=@lang_tree_files@ |
| GCC_THREAD_FILE=@thread_file@ |
| OBJC_BOEHM_GC=@objc_boehm_gc@ |
| JAVAGC=@JAVAGC@ |
| GTHREAD_FLAGS=@gthread_flags@ |
| # Be prepared for gcc2 merges. |
| gcc_version=@gcc_version@ |
| gcc_version_trigger=@gcc_version_trigger@ |
| version=$(gcc_version) |
| mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c` |
| |
| # Common prefix for installation directories. |
| # NOTE: This directory must exist when you start installation. |
| prefix = @prefix@ |
| # Directory in which to put localized header files. On the systems with |
| # gcc as the native cc, `local_prefix' may not be `prefix' which is |
| # `/usr'. |
| # NOTE: local_prefix *should not* default from prefix. |
| local_prefix = @local_prefix@ |
| # Directory in which to put host dependent programs and libraries |
| exec_prefix = @exec_prefix@ |
| # Directory in which to put the executable for the command `gcc' |
| bindir = @bindir@ |
| # Directory in which to put the directories used by the compiler. |
| libdir = @libdir@ |
| # Directory in which the compiler finds executables, libraries, etc. |
| libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(version) |
| # Used to produce a relative $(gcc_tooldir) in gcc.o |
| unlibsubdir = ../../.. |
| # Directory in which to find other cross-compilation tools and headers. |
| dollar = @dollar@ |
| # Used in install-cross. |
| gcc_tooldir = @gcc_tooldir@ |
| # Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/ |
| build_tooldir = $(exec_prefix)/$(target_alias) |
| # Directory in which the compiler finds g++ includes. |
| gcc_gxx_include_dir= @gcc_gxx_include_dir@ |
| # Directory to search for site-specific includes. |
| includedir = $(local_prefix)/include |
| # assertdir is overridden in cross-make. |
| # (But this currently agrees with what is in cross-make.) |
| assertdir = $(gcc_tooldir)/include |
| # where the info files go |
| infodir = @infodir@ |
| # Where cpp should go besides $prefix/bin if necessary |
| cpp_install_dir = @cpp_install_dir@ |
| # where the locale files go |
| datadir = $(prefix)/@DATADIRNAME@ |
| localedir = $(datadir)/locale |
| # Extension (if any) to put in installed man-page filename. |
| manext = .1 |
| objext = .o |
| exeext = @host_exeext@ |
| build_exeext = @build_exeext@ |
| |
| # Directory in which to put man pages. |
| mandir = @mandir@ |
| man1dir = $(mandir)/man1 |
| # Dir for temp files. |
| tmpdir = /tmp |
| |
| # Top build directory, relative to here. |
| top_builddir = . |
| |
| # Whether we were configured with NLS. |
| USE_NLS = @USE_NLS@ |
| |
| # Internationalization library. |
| INTLLIBS = @INTLLIBS@ |
| |
| # List of internationalization subdirectories. |
| POSUB = @POSUB@ |
| INTL_SUBDIRS = intl $(POSUB) |
| |
| # Additional system libraries to link with. |
| CLIB= |
| |
| # Change this to a null string if obstacks are installed in the |
| # system library. |
| OBSTACK=obstack.o |
| |
| # Configure will set these if you need vfprintf and possibly _doprnt support. |
| VFPRINTF=@vfprintf@ |
| DOPRINT=@doprint@ |
| |
| # Specify the rule for actually making libgcc.a, |
| LIBGCC = libgcc.a |
| # and the rule for installing it. |
| INSTALL_LIBGCC = install-libgcc |
| |
| # Specify the rule for actually making libgcc1.a. |
| # The value may be empty; that means to do absolutely nothing |
| # with or for libgcc1.a. |
| LIBGCC1 = libgcc1.a |
| |
| # Specify the rule for making libgcc1.a for a cross-compiler. |
| # The default rule assumes that libgcc1.a is supplied by the user. |
| CROSS_LIBGCC1 = libgcc1.cross |
| |
| # Specify the rule for actually making libgcc2.a. |
| LIBGCC2 = libgcc2.a |
| |
| # Options to use when compiling libgcc2.a. |
| # -g1 causes output of debug info only for file-scope entities. |
| # we use this here because that should be enough, and also |
| # so that -g1 will be tested. |
| # |
| LIBGCC2_DEBUG_CFLAGS = -g1 |
| LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@ |
| |
| # Additional options to use when compiling libgcc2.a. |
| # Some targets override this to -Iinclude |
| LIBGCC2_INCLUDES = |
| |
| # Additional target-dependent options for compiling libgcc2.a. |
| TARGET_LIBGCC2_CFLAGS = |
| |
| # Things which must be built before building libgcc2.a. |
| # Some targets override this to stmp-int-hdrs |
| LIBGCC2_DEPS = |
| |
| # libgcc1-test target (must also be overridable for a target) |
| LIBGCC1_TEST = libgcc1-test |
| |
| # List of extra executables that should be compiled for this target machine |
| # that are used for compiling from source code to object code. |
| # The rules for compiling them should be in the t-* file for the machine. |
| EXTRA_PASSES =@extra_passes@ |
| |
| # Like EXTRA_PASSES, but these are used when linking. |
| EXTRA_PROGRAMS = @extra_programs@ |
| |
| # List of extra object files that should be compiled for this target machine. |
| # The rules for compiling them should be in the t-* file for the machine. |
| EXTRA_PARTS = @extra_parts@ |
| |
| # List of extra object files that should be compiled and linked with |
| # compiler proper (cc1, cc1obj, cc1plus). |
| EXTRA_OBJS = @extra_objs@ |
| |
| # List of extra object files that should be compiled and linked with |
| # the gcc driver. |
| EXTRA_GCC_OBJS =@host_extra_gcc_objs@ |
| |
| # List of additional header files to install. |
| # Often this is edited directly by `configure'. |
| EXTRA_HEADERS =@extra_headers_list@ |
| |
| # Set this to `collect2' to enable use of collect2. |
| USE_COLLECT2 = @will_use_collect2@ |
| MAYBE_USE_COLLECT2 = @maybe_use_collect2@ |
| # It is convenient for configure to add the assignment at the beginning, |
| # so don't override it here. |
| USE_COLLECT2 = collect2$(exeext) |
| |
| # List of extra C and assembler files to add to libgcc1.a. |
| # Assembler files should have names ending in `.asm'. |
| LIB1FUNCS_EXTRA = |
| |
| # List of extra C and assembler files to add to libgcc2.a. |
| # Assembler files should have names ending in `.asm'. |
| LIB2FUNCS_EXTRA = |
| |
| # Handle cpp installation. |
| INSTALL_CPP= |
| UNINSTALL_CPP= |
| |
| # We do not try to build float.h anymore. Let configure select the |
| # appropriate pre-built float.h file for the target. |
| FLOAT_H=@float_h_file@ |
| |
| # Program to convert libraries. |
| LIBCONVERT = |
| |
| # Control whether header files are installed. |
| INSTALL_HEADERS=install-headers |
| |
| # Options for tar when copying trees. So HPUX can override it. |
| TAROUTOPTS = xpBf |
| |
| # Additional directories of header files to run fixincludes on. |
| # These should be directories searched automatically by default |
| # just as /usr/include is. |
| # *Do not* use this for directories that happen to contain |
| # header files, but are not searched automatically by default. |
| # On most systems, this is empty. |
| OTHER_FIXINCLUDES_DIRS= |
| |
| # A list of all the language-specific executables. |
| # This is overridden by configure. |
| COMPILERS = cc1$(exeext) @all_compilers@ |
| |
| # List of things which should already be built whenever we try to use xgcc |
| # to compile anything (without linking). |
| GCC_PASSES=xgcc$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES) |
| |
| # List of things which should already be built whenever we try to use xgcc |
| # to link anything. |
| GCC_PARTS=$(GCC_PASSES) $(LIBGCC) $(EXTRA_PROGRAMS) $(USE_COLLECT2) $(EXTRA_PARTS) |
| |
| # Directory to link to, when using the target `maketest'. |
| DIR = ../gcc |
| |
| # Guaranteed to not exist when not passing md through cpp. |
| # This value is overridden directly by configure. |
| MD_FILE = md-cpp-not-used |
| |
| # Flags to use when cross-building GCC. |
| # Prefix to apply to names of object files when using them |
| # to run on the machine we are compiling on. |
| HOST_PREFIX= |
| # Prefix to apply to names of object files when compiling them |
| # to run on the machine we are compiling on. |
| # The default for this variable is chosen to keep these rules |
| # out of the way of the other rules for compiling the same source files. |
| HOST_PREFIX_1=loser- |
| HOST_CC=$(CC) |
| HOST_CFLAGS=$(ALL_CFLAGS) |
| HOST_CLIB=$(CLIB) |
| HOST_INTLLIBS=$(INTLLIBS) |
| HOST_LDFLAGS=$(LDFLAGS) |
| HOST_CPPFLAGS=$(ALL_CPPFLAGS) |
| HOST_ALLOCA=$(ALLOCA) |
| HOST_MALLOC=$(MALLOC) |
| HOST_OBSTACK=$(OBSTACK) |
| HOST_VFPRINTF=$(VFPRINTF) |
| HOST_DOPRINT=$(DOPRINT) |
| |
| # Actual name to use when installing a native compiler. |
| GCC_INSTALL_NAME = `t='$(program_transform_name)'; echo gcc | sed -e $$t` |
| CPP_INSTALL_NAME = `t='$(program_transform_name)'; echo cpp | sed -e $$t` |
| PROTOIZE_INSTALL_NAME = `t='$(program_transform_name)'; echo protoize | sed -e $$t` |
| UNPROTOIZE_INSTALL_NAME = `t='$(program_transform_name)'; echo unprotoize | sed -e $$t` |
| GCOV_INSTALL_NAME = `t='$(program_transform_name)'; echo gcov | sed -e $$t` |
| |
| # Actual name to use when installing a cross-compiler. |
| GCC_CROSS_NAME = `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t` |
| PROTOIZE_CROSS_NAME = `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t` |
| UNPROTOIZE_CROSS_NAME = `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t` |
| |
| # Choose the real default target. |
| ALL=all.internal |
| |
| # Choose the real install target. |
| INSTALL_TARGET=install-normal |
| |
| # Setup the testing framework, if you have one |
| EXPECT = `if [ -f $${rootme}/../expect/expect ] ; then \ |
| echo $${rootme}/../expect/expect ; \ |
| else echo expect ; fi` |
| |
| RUNTEST = `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \ |
| echo $${srcdir}/../dejagnu/runtest ; \ |
| else echo runtest; fi` |
| RUNTESTFLAGS = |
| |
| # Extra symbols for fixproto to define when parsing headers. |
| FIXPROTO_DEFINES = |
| |
| # Extra flags to use when compiling crt{begin,end}.o. |
| CRTSTUFF_T_CFLAGS = |
| |
| # Extra flags to use when compiling [m]crt0.o. |
| CRT0STUFF_T_CFLAGS = |
| |
| # "t" or nothing, for building multilibbed versions of, say, crtbegin.o. |
| T = |
| |
| # End of variables for you to override. |
| |
| # Definition of `all' is here so that new rules inserted by sed |
| # do not specify the default target. |
| # The real definition is under `all.internal' (for native compilers) |
| # or `all.cross' (for cross compilers). |
| all: all.indirect |
| |
| # This tells GNU Make version 3 not to put all variables in the environment. |
| .NOEXPORT: |
| |
| # sed inserts variable overrides after the following line. |
| ####target overrides |
| @target_overrides@ |
| |
| ####host overrides |
| @host_overrides@ |
| |
| ####cross overrides |
| @cross_defines@ |
| @cross_overrides@ |
| |
| ####build overrides |
| @build_overrides@ |
| # |
| # Now figure out from those variables how to compile and link. |
| |
| all.indirect: $(ALL) |
| |
| # IN_GCC tells various files that system.h, toplev.c, etc are available. |
| INTERNAL_CFLAGS = $(CROSS) -DIN_GCC $(SCHED_CFLAGS) @extra_c_flags@ |
| |
| # This is the variable actually used when we compile. |
| # If you change this line, you probably also need to change the definition |
| # of HOST_CFLAGS in build-make to match. |
| ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS) \ |
| @DEFS@ |
| |
| # Likewise. |
| ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS) |
| |
| # Even if ALLOCA is set, don't use it if compiling with GCC. |
| USE_ALLOCA= ${ALLOCA} |
| USE_HOST_ALLOCA= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac ` |
| USE_HOST_MALLOC= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac ` |
| USE_HOST_OBSTACK= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac ` |
| USE_HOST_VFPRINTF= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac ` |
| USE_HOST_DOPRINT= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac ` |
| |
| # Dependency on obstack, alloca, malloc or whatever library facilities |
| # are not installed in the system libraries. |
| # We don't use USE_ALLOCA because backquote expansion doesn't work in deps. |
| LIBDEPS= $(INTLLIBS) $(OBSTACK) $(ALLOCA) $(MALLOC) $(VFPRINTF) $(DOPRINT) |
| |
| # Likewise, for use in the tools that must run on this machine |
| # even if we are cross-building GCC. |
| # We don't use USE_ALLOCA because backquote expansion doesn't work in deps. |
| HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_INTLLIBS) $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC) $(HOST_PREFIX)$(HOST_VFPRINTF) $(HOST_PREFIX)$(HOST_DOPRINT) |
| |
| # How to link with both our special library facilities |
| # and the system's installed libraries. |
| LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(INTLLIBS) @LIBS@ $(VFPRINTF) $(DOPRINT) $(CLIB) ../libiberty/libiberty.a |
| |
| # Likewise, for use in the tools that must run on this machine |
| # even if we are cross-building GCC. |
| HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC) \ |
| $(HOST_INTLLIBS) $(USE_HOST_VFPRINTF) $(USE_HOST_DOPRINT) \ |
| $(HOST_CLIB) |
| |
| HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o |
| HOST_RTLANAL = $(HOST_PREFIX)rtlanal.o |
| HOST_PRINT = $(HOST_PREFIX)print-rtl.o |
| |
| # Specify the directories to be searched for header files. |
| # Both . and srcdir are used, in that order, |
| # so that tm.h and config.h will be found in the compilation |
| # subdirectory rather than in the source directory. |
| INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config -I$(srcdir)/../include |
| |
| # Always use -I$(srcdir)/config when compiling. |
| .c.o: |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< |
| |
| # This tells GNU make version 3 not to export all the variables |
| # defined in this file into the environment. |
| .NOEXPORT: |
| # |
| # Support for additional languages (other than c and objc). |
| # ??? objc can be supported this way too (leave for later). |
| |
| # These next lines are overridden by configure. |
| LANG_MAKEFILES = @all_lang_makefiles@ |
| LANG_STAGESTUFF = @all_stagestuff@ |
| LANG_DIFF_EXCLUDES = @all_diff_excludes@ |
| LANG_LIB2FUNCS = @all_lib2funcs@ |
| LANG_EXTRA_HEADERS = @all_headers@ |
| |
| # Flags to pass to recursive makes. |
| # CC is set by configure. Hosts without symlinks need special handling |
| # because we need CC="stage1/xgcc -Bstage1/" to work in the language |
| # subdirectories. |
| # ??? The choices here will need some experimenting with. |
| FLAGS_TO_PASS = \ |
| "AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \ |
| "AR_FOR_TARGET=$(AR_FOR_TARGET)" \ |
| "BISON=$(BISON)" \ |
| "BISONFLAGS=$(BISONFLAGS)" \ |
| "CC=@cc_set_by_configure@" \ |
| "CFLAGS=$(CFLAGS)" \ |
| "CLIB=$(CLIB)" \ |
| "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \ |
| "LDFLAGS=$(LDFLAGS)" \ |
| "LEX=$(LEX)" \ |
| "LEXFLAGS=$(LEXFLAGS)" \ |
| "LN=$(LN)" \ |
| "LN_S=$(LN_S)" \ |
| "MAKEINFO=$(MAKEINFO)" \ |
| "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \ |
| "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \ |
| "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \ |
| "SHELL=$(SHELL)" \ |
| "STAGE_PREFIX=@stage_prefix_set_by_configure@" \ |
| "exeext=$(exeext)" \ |
| "build_exeext=$(build_exeext)" \ |
| "objext=$(objext)" \ |
| "exec_prefix=$(exec_prefix)" \ |
| "prefix=$(prefix)" \ |
| "local_prefix=$(local_prefix)" \ |
| "gxx_include_dir=$(gcc_gxx_include_dir)" \ |
| "tooldir=$(tooldir)" \ |
| "gcc_tooldir=$(gcc_tooldir)" \ |
| "bindir=$(bindir)" \ |
| "libsubdir=$(libsubdir)" \ |
| "datadir=$(datadir)" \ |
| "distdir=../tmp/\$$(subdir)" \ |
| "localedir=$(localedir)" |
| |
| PREPEND_DOTDOT_TO_RELATIVE_PATHS = sed \ |
| -e 's|^ *[^ /][^ /]*/|%&|' \ |
| -e 's| -B| -B%|g' \ |
| -e 's|% *[^- /]|%&|g' \ |
| -e 's|%% *|../|g' \ |
| -e 's|%||g' |
| SUBDIR_FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) \ |
| "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`" |
| # |
| # Lists of files for various purposes. |
| |
| # Language-specific object files for C and Objective C. |
| C_AND_OBJC_OBJS = c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \ |
| c-aux-info.o c-common.o c-iterate.o @extra_c_objs@ |
| |
| # Language-specific object files for C. |
| C_OBJS = c-parse.o c-lang.o $(C_AND_OBJC_OBJS) |
| |
| SCHED_PREFIX = @sched_prefix@ |
| SCHED_CFLAGS = @sched_cflags@ |
| |
| # Language-independent object files. |
| OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \ |
| function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \ |
| intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o \ |
| dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \ |
| integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \ |
| regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \ |
| insn-peep.o reorg.o $(SCHED_PREFIX)sched.o final.o recog.o reg-stack.o \ |
| insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \ |
| profile.o insn-attrtab.o $(out_object_file) getpwd.o $(EXTRA_OBJS) convert.o \ |
| mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o |
| |
| # GEN files are listed separately, so they can be built before doing parallel |
| # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load |
| # them before rtl.o is compiled. |
| GEN= genemit genoutput genrecog genextract genflags gencodes genconfig \ |
| genpeep gengenrtl gencheck |
| |
| CCCP=@cpp_main@ |
| |
| # Files to be copied away after each stage in building. |
| STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \ |
| insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \ |
| insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \ |
| s-flags s-config s-codes s-mlib s-under\ |
| s-output s-recog s-emit s-extract s-peep s-check \ |
| s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \ |
| genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \ |
| genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \ |
| genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \ |
| genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \ |
| gencheck$(build_exeext) \ |
| xgcc$(exeext) xcpp$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES) \ |
| $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \ |
| $(CCCP)$(exeext) cc1obj$(exeext) enquire$(exeext) \ |
| protoize$(exeext) unprotoize$(exeext) \ |
| specs collect2$(exeext) $(USE_COLLECT2) underscore.c \ |
| gcov$(exeext) *.bp \ |
| *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop \ |
| *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.gcse *.flow2 \ |
| *.[si] libcpp.a \ |
| $(LANG_STAGESTUFF) |
| |
| # Members of libgcc1.a. |
| LIB1FUNCS = _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \ |
| _lshrsi3 _ashrsi3 _ashlsi3 \ |
| _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \ |
| _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \ |
| _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \ |
| _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \ |
| _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2 |
| |
| # Library members defined in libgcc2.c. |
| LIB2FUNCS = _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \ |
| _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \ |
| _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \ |
| _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \ |
| _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \ |
| _fixtfdi _fixunstfdi _floatditf \ |
| __gcc_bcmp _varargs __dummy _eprintf \ |
| _bb _shtab _clear_cache _trampoline __main _exit \ |
| _ctors _pure |
| |
| LIB2FUNCS_EH = _eh |
| |
| FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \ |
| _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \ |
| _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \ |
| _sf_to_df |
| |
| DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \ |
| _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \ |
| _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \ |
| _df_to_sf |
| |
| # The files that "belong" in CONFIG_H are deliberately omitted |
| # because having them there would not be useful in actual practice. |
| # All they would do is cause complete recompilation every time |
| # one of the machine description files is edited. |
| # That may or may not be what one wants to do. |
| # If it is, rm *.o is an easy way to do it. |
| # CONFIG_H = $(host_xm_file) $(tm_file) |
| CONFIG_H = |
| RTL_BASE_H = rtl.h rtl.def machmode.h machmode.def |
| RTL_H = $(RTL_BASE_H) genrtl.h |
| TREE_H = tree.h real.h tree.def machmode.h machmode.def tree-check.h |
| BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h |
| DEMANGLE_H = $(srcdir)/../include/demangle.h |
| RECOG_H = recog.h |
| EXPR_H = expr.h insn-codes.h |
| REGS_H = regs.h varray.h machmode.h machmode.def |
| # |
| # Language makefile fragments. |
| |
| # The following targets define the interface between us and the languages. |
| # |
| # all.build, all.cross, start.encap, rest.encap, |
| # info, dvi, |
| # install-normal, install-common, install-info, install-man, |
| # uninstall, distdir, |
| # mostlyclean, clean, distclean, extraclean, maintainer-clean, |
| # stage1, stage2, stage3, stage4 |
| # |
| # Each language is linked in with a series of hooks (since we can't use `::' |
| # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info). |
| # Configure computes and adds these here. |
| |
| ####language hooks |
| @language_hooks@ |
| |
| # sed inserts language fragments after the following line. |
| ####language fragments |
| @language_fragments@ |
| |
| # End of language makefile fragments. |
| # |
| # The only suffixes we want for implicit rules are .c and .o, so clear |
| # the list and add them. This speeds up GNU Make, and allows -r to work. |
| .SUFFIXES: |
| .SUFFIXES: .c .o |
| |
| Makefile: $(srcdir)/Makefile.in config.status $(srcdir)/version.c \ |
| $(xmake_file) $(tmake_file) $(LANG_MAKEFILES) |
| $(SHELL) $(srcdir)/configure.frag $(srcdir) "$(SUBDIRS)" \ |
| "$(xmake_file)" "$(tmake_file)" |
| cp config.status config.run |
| LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.run |
| rm -f config.run |
| |
| $(srcdir)/configure: $(srcdir)/configure.in |
| cd $(srcdir); autoconf |
| |
| # cstamp-h.in controls rebuilding of config.in. |
| # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't |
| # delete it. A stamp file is needed as autoheader won't update the file if |
| # nothing has changed. |
| # It remains in the source directory and is part of the distribution. |
| # This follows what is done in shellutils, fileutils, etc. |
| # "echo timestamp" is used instead of touch to be consistent with other |
| # packages that use autoconf (??? perhaps also to avoid problems with patch?). |
| # ??? Newer versions have a maintainer mode that may be useful here. |
| $(srcdir)/config.in: $(srcdir)/cstamp-h.in |
| $(srcdir)/cstamp-h.in: $(srcdir)/configure.in $(srcdir)/acconfig.h |
| cd $(srcdir) && autoheader |
| @rm -f $(srcdir)/cstamp-h.in |
| echo timestamp > $(srcdir)/cstamp-h.in |
| auto-host.h: cstamp-h ; @true |
| cstamp-h: config.in config.status |
| CONFIG_HEADERS=auto-host.h:config.in LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status |
| |
| # Really, really stupid make features, such as SUN's KEEP_STATE, may force |
| # a target to build even if it is up-to-date. So we must verify that |
| # config.status does not exist before failing. |
| config.status: configure version.c |
| @if [ ! -f config.status ] ; then \ |
| echo You must configure gcc. Look at the INSTALL file for details.; \ |
| false; \ |
| else \ |
| LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status --recheck; \ |
| fi |
| |
| all.internal: start.encap rest.encap doc |
| # This is what to compile if making a cross-compiler. |
| # Note that we can compile enquire using the cross-compiler just built, |
| # although we can't run it on this machine. |
| all.cross: native gcc-cross specs stmp-headers $(STMP_FIXPROTO) $(LIBGCC) \ |
| $(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross doc |
| # This is what to compile if making gcc with a cross-compiler. |
| all.build: native xgcc$(exeext) xcpp$(exeext) $(EXTRA_PARTS) lang.all.build |
| # This is what must be made before installing GCC and converting libraries. |
| start.encap: native xgcc$(exeext) xcpp$(exeext) specs $(LIBGCC1) \ |
| xlimits.h lang.start.encap |
| # These can't be made until after GCC can run. |
| rest.encap: stmp-headers $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap |
| # This is what is made with the host's compiler |
| # whether making a cross compiler or not. |
| native: config.status auto-host.h cpp$(exeext) intl.all $(LANGUAGES) \ |
| $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) |
| |
| # Define the names for selecting languages in LANGUAGES. |
| C c: cc1$(exeext) |
| PROTO: proto |
| |
| # Tell GNU make these are phony targets. |
| .PHONY: C c PROTO proto |
| |
| # On the target machine, finish building a cross compiler. |
| # This does the things that can't be done on the host machine. |
| rest.cross: $(LIBGCC) specs |
| |
| # Verify that it works to compile and link libgcc1-test. |
| # If it does, then there are sufficient replacements for libgcc1.a. |
| libgcc1-test: libgcc1-test.o native $(GCC_PARTS) |
| @echo "Testing libgcc1. Ignore linker warning messages." |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) libgcc1-test.o -o libgcc1-test \ |
| -nostartfiles -nostdlib `$(GCC_FOR_TARGET) --print-libgcc-file-name` |
| libgcc1-test.o: libgcc1-test.c native xgcc$(exeext) |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -c $(srcdir)/libgcc1-test.c |
| |
| # Recompile all the language-independent object files. |
| # This is used only if the user explicitly asks for it. |
| compilations: ${OBJS} |
| |
| # Create a list of the language-independent object files so the language |
| # subdirectories needn't mention their names explicitly. |
| stamp-objlist: $(OBJS) |
| echo " $(OBJS)" | sed -e 's, \([a-z0-9]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist |
| |
| # We call this executable `xgcc' rather than `gcc' |
| # to avoid confusion if the current directory is in the path |
| # and CC is `gcc'. It is renamed to `gcc' when it is installed. |
| xgcc$(exeext): gcc.o gccspec.o version.o intl.o prefix.o \ |
| version.o $(LIBDEPS) $(EXTRA_GCC_OBJS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o gccspec.o intl.o \ |
| prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS) |
| |
| # We call this executable `xcpp' rather than `cpp' |
| # since the real preprocessor is named `cpp'. It too is renamed |
| # when it is installed. |
| # The only difference from xgcc is that it's linked with cppspec.o |
| # instead of gccspec.o. |
| xcpp$(exeext): gcc.o cppspec.o version.o intl.o prefix.o \ |
| version.o $(LIBDEPS) $(EXTRA_GCC_OBJS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o cppspec.o intl.o \ |
| prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS) |
| |
| # Dump a specs file to make -B./ read these specs over installed ones. |
| specs: xgcc$(exeext) |
| $(GCC_FOR_TARGET) -dumpspecs > tmp-specs |
| mv tmp-specs specs |
| |
| # We do want to create an executable named `xgcc', so we can use it to |
| # compile libgcc2.a. |
| # Also create gcc-cross, so that install-common will install properly. |
| gcc-cross: xgcc$(exeext) |
| cp xgcc$(exeext) gcc-cross$(exeext) |
| |
| cc1$(exeext): $(P) $(OBJS) $(C_OBJS) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(C_OBJS) $(LIBS) |
| |
| # Build the version of limits.h that we will install. |
| xlimits.h: glimits.h limitx.h limity.h |
| if $(LIMITS_H_TEST) ; then \ |
| cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > tmp-xlimits.h; \ |
| else \ |
| cat $(srcdir)/glimits.h > tmp-xlimits.h; \ |
| fi |
| mv tmp-xlimits.h xlimits.h |
| # |
| # Build libgcc.a. |
| # This is done in two parts because some functions, in libgcc1.c, |
| # must be compiled with something other than GCC, |
| # while the rest, in libgcc2.c, must be compiled with xgcc. |
| # That means we can't do libgcc2.c until after xgcc, cc1, etc. |
| |
| # Use this as value of LIBGCC1 to cause conversion to GNU library format. |
| # LIBCONVERT should put its output in libgcc1.conv. |
| libgcc1.conv: libgcc1.a |
| $(LIBCONVERT) libgcc1.a libgcc1.conv |
| |
| # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely. |
| # Make an empty file instead. |
| libgcc1.null: $(GCC_PASSES) |
| echo "void __foo () {}" > dummy.c |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c |
| $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) libgcc1.null dummy$(objext) |
| rm -f dummy$(objext) dummy.c |
| |
| # This is $(LIBGCC1) for a cross-compiler. |
| # We have no automatic way of building libgcc1.a, |
| # so it's up to the installer to find a way to do that. |
| # This rule deliberately does not depend on libgcc1.a |
| # so that it will fail if the installer hasn't provided it. |
| libgcc1.cross: |
| mv libgcc1.a libgcc1.cross || (echo You must find a way to make libgcc1.a; false) |
| |
| # Compile the library of arithmetic subroutines with the native compiler. |
| # Don't compile it with GCC! |
| # (That would cause most arithmetic functions to call themselves.) |
| # |
| # NOTE: If you modify these rules substantially, please be sure to |
| # check at least config/i386/t-sco5 and possibly other makefile |
| # fragments. |
| libgcc1.a: libgcc1.c $(CONFIG_H) $(LIB1FUNCS_EXTRA) config.status |
| -rm -f tmplibgcc1.a |
| # Actually build it in tmplibgcc1.a, then rename at end, |
| # so that libgcc1.a itself remains nonexistent if compilation is aborted. |
| # -e causes any failing command to make this rule fail. |
| # -e doesn't work in certain shells, so we test $$? as well. |
| # lynx has a broken ar, it always complains when the initial library is |
| # empty, thus this command works only if we don't do -e |
| # There is a trailing backslash (\) deleted from the following line. |
| # set -e; |
| for name in $(LIB1FUNCS); \ |
| do \ |
| echo $${name}; \ |
| rm -f $${name}$(objext); \ |
| $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| mv libgcc1$(objext) $${name}$(objext); \ |
| $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \ |
| rm -f $${name}$(objext); \ |
| done |
| # Some shells crash when a loop has no items. |
| # So make sure there is always at least one--`..'. |
| # Then ignore it. |
| # We don't use -e here because there are if statements |
| # that should not make the command give up when the if condition is false. |
| # Instead, we test for failure after each command where it matters. |
| for file in .. $(LIB1FUNCS_EXTRA); \ |
| do \ |
| if [ x$${file} != x.. ]; then \ |
| name=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \ |
| echo $${name}; \ |
| if [ $${name}.asm = $${file} ]; then \ |
| cp $${file} $${name}.s || exit 1; file=$${name}.s; \ |
| else true; fi; \ |
| $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| rm -f $${name}.s $${name}$(objext); \ |
| else true; \ |
| fi; \ |
| done |
| -if $(RANLIB_TEST_FOR_TARGET) ; then \ |
| $(RANLIB_FOR_TARGET) tmplibgcc1.a; \ |
| else true; fi |
| mv tmplibgcc1.a libgcc1.a |
| |
| # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of |
| # functions. LIB1ASMSRC is the name of the source file in the config |
| # subdirectory. |
| libgcc1-asm.a: libgcc2.ready config.status $(srcdir)/config/$(LIB1ASMSRC) |
| -rm -f tmplibgcc1.a libgcc1.S |
| cp $(srcdir)/config/$(LIB1ASMSRC) libgcc1.S |
| # Actually build it in tmplibgcc1.a, then rename at end, |
| # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted. |
| # -e causes any failing command to make this rule fail. |
| # -e doesn't work in certain shells, so we test $$? as well. |
| # lynx has a broken ar, it always complains when the initial library is |
| # empty, thus this command works only if we don't do -e |
| # There is a trailing backslash (\) deleted from the following line. |
| # set -e; |
| for name in $(LIB1ASMFUNCS); \ |
| do \ |
| echo $${name}; \ |
| $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} libgcc1.S; \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| mv libgcc1$(objext) $${name}$(objext); \ |
| $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc1.a $${name}$(objext); \ |
| rm -f $${name}$(objext); \ |
| done |
| -rm -f libgcc1.S |
| mv tmplibgcc1.a libgcc1-asm.a |
| |
| # Generate assembly versions of the functions required for libgcc1. |
| # You'll still need to massage the code by hand (possibly hacking |
| # underscores and local labels) but this will get you started. |
| libgcc1.S: libgcc1.c $(CONFIG_H) config.status |
| -rm -f libgcc1.S |
| touch libgcc1.S |
| for name in $(LIB1FUNCS); \ |
| do \ |
| echo $${name}; \ |
| $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -S -DL$${name} $(srcdir)/libgcc1.c; \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| echo '#ifdef ' L$${name} >> libgcc1.S; \ |
| cat libgcc1.s >> libgcc1.S; \ |
| echo '#endif /*' L$${name} '*/' >> libgcc1.S; \ |
| echo "" >> libgcc1.S; \ |
| done |
| |
| # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled. |
| # But recompiling cc1 should not force recompilation of libgcc2.a. |
| # If you want to force recompilation, delete libgcc2.a. |
| libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS) stmp-int-hdrs $(STMP_FIXPROTO) |
| -if [ -f libgcc2.ready ] ; then \ |
| true; \ |
| else \ |
| touch libgcc2.ready; \ |
| fi |
| |
| LIB2ADD = $(srcdir)/frame.c $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS) |
| libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(FPBIT) $(DPBIT) $(LIB2ADD) \ |
| machmode.h longlong.h frame.h gbl-ctors.h config.status |
| # Actually build it in tmplibgcc2.a, then rename at end, |
| # so that libgcc2.a itself remains nonexistent if compilation is aborted. |
| -rm -f tmplibgcc2.a |
| # -e causes any failing command to make this rule fail. |
| # -e doesn't work in certain shells, so we test $$? as well. |
| # lynx has a broken ar, it always complains when the initial library is |
| # empty, thus this command works only if we don't do -e |
| # There is a trailing backslash (\) deleted from the following line. |
| # set -e; |
| for name in $(LIB2FUNCS); \ |
| do \ |
| echo $${name}; \ |
| $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \ |
| $(srcdir)/libgcc2.c -o $${name}$(objext); \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \ |
| rm -f $${name}$(objext); \ |
| done |
| for name in $(LIB2FUNCS_EH); \ |
| do \ |
| echo $${name}; \ |
| $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) -fexceptions $(INCLUDES) -c \ |
| -DL$${name} $(srcdir)/libgcc2.c -o $${name}$(objext); \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \ |
| rm -f $${name}$(objext); \ |
| done |
| if [ x$(FPBIT) != x ]; then \ |
| for name in $(FPBIT_FUNCS); \ |
| do \ |
| echo $${name}; \ |
| $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \ |
| -DFINE_GRAINED_LIBRARIES $(FPBIT) -o $${name}$(objext); \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \ |
| rm -f $${name}$(objext); \ |
| done; \ |
| else true; fi; |
| if [ x$(DPBIT) != x ]; then \ |
| for name in $(DPBIT_FUNCS); \ |
| do \ |
| echo $${name}; \ |
| $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \ |
| -DFINE_GRAINED_LIBRARIES $(DPBIT) -o $${name}$(objext); \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \ |
| rm -f $${name}$(objext); \ |
| done; \ |
| else true; fi; |
| # Some shells crash when a loop has no items. |
| # So make sure there is always at least one--`..'. |
| # Then ignore it. |
| # We don't use -e here because there are if statements |
| # that should not make the command give up when the if condition is false. |
| # Instead, we test for failure after each command where it matters. |
| for file in $(LIB2ADD); do \ |
| name=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \ |
| oname=` echo $${name} | sed -e 's,.*/,,'`; \ |
| if [ $${name}.txt = $${file} ]; then \ |
| for f in .. `cat $${file}`; do if [ x$${f} != x.. ]; then \ |
| $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \ |
| AR_FOR_TARGET="$(AR_FOR_TARGET)" \ |
| AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" CC="$(CC)" \ |
| CFLAGS="$(CFLAGS)" HOST_PREFIX="$(HOST_PREFIX)" \ |
| HOST_PREFIX_1="$(HOST_PREFIX_1)" \ |
| LANGUAGES="$(LANGUAGES)" \ |
| LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $${f}; \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${f}; \ |
| rm -f $${f}; \ |
| else true; \ |
| fi; done; \ |
| else \ |
| echo $${name}; \ |
| if [ $${name}.asm = $${file} ]; then \ |
| cp $${file} $${name}.s || exit 1; file=$${name}.s; \ |
| else true; fi; \ |
| $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) tmplibgcc2.a $${oname}$(objext); \ |
| rm -f $${name}.s $${oname}$(objext); \ |
| fi; \ |
| done |
| mv tmplibgcc2.a libgcc2.a |
| # These lines were deleted from above the mv command |
| # because ranlibing libgcc.a itself should suffice. |
| # -if [ x${HPUX_GAS} = x ] ; then \ |
| # if $(RANLIB_TEST_FOR_TARGET) ; then \ |
| # $(RANLIB_FOR_TARGET) tmplibgcc2.a; |
| # else true; fi; \ |
| # else true; fi |
| |
| # Combine the various libraries into a single library, libgcc.a. |
| libgcc.a: $(LIBGCC1) $(LIBGCC2) |
| -rm -rf tmplibgcc.a libgcc.a tmpcopy |
| mkdir tmpcopy |
| -if [ x$(LIBGCC1) != x ]; \ |
| then (cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC1)); \ |
| else true; \ |
| fi |
| # Some versions of ar (specifically the one in RISC/os 5.x), create an |
| # unwritable table of contents file, and then print an error message when |
| # the second ar command tries to overwrite this file. To avoid the error |
| # message from ar, we make sure all files are writable. |
| -(cd tmpcopy; chmod +w * > /dev/null 2>&1) |
| (cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC2)) |
| (cd tmpcopy; $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) ../tmplibgcc.a *$(objext)) |
| rm -rf tmpcopy |
| -if $(RANLIB_TEST_FOR_TARGET) ; then \ |
| $(RANLIB_FOR_TARGET) tmplibgcc.a; \ |
| else true; fi |
| # Actually build it in tmplibgcc.a, then rename at end, |
| # so that libgcc.a itself remains nonexistent if compilation is aborted. |
| mv tmplibgcc.a libgcc.a |
| |
| # Use the genmultilib shell script to generate the information the gcc |
| # driver program needs to select the library directory based on the |
| # switches. |
| multilib.h: s-mlib; @true |
| s-mlib: $(srcdir)/genmultilib Makefile |
| $(SHELL) $(srcdir)/genmultilib \ |
| "$(MULTILIB_OPTIONS)" \ |
| "$(MULTILIB_DIRNAMES)" \ |
| "$(MULTILIB_MATCHES)" \ |
| "$(MULTILIB_EXCEPTIONS)" \ |
| "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h |
| $(srcdir)/move-if-change tmp-mlib.h multilib.h |
| touch s-mlib |
| |
| # Build multiple copies of libgcc.a, one for each target switch. |
| stmp-multilib: $(LIBGCC1) libgcc2.c libgcc2.ready $(CONFIG_H) \ |
| frame.h \ |
| $(LIB2ADD) machmode.h longlong.h gbl-ctors.h config.status |
| for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \ |
| dir=`echo $$i | sed -e 's/;.*$$//'`; \ |
| flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ |
| $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \ |
| AR_FOR_TARGET="$(AR_FOR_TARGET)" \ |
| AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \ |
| CC="$(CC)" CFLAGS="$(CFLAGS)" \ |
| RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \ |
| RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \ |
| LANGUAGES="$(LANGUAGES)" \ |
| HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \ |
| LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS) $${flags}" \ |
| MULTILIB_CFLAGS="$${flags}" \ |
| LIBGCC1="$(LIBGCC1)" LIBGCC2="$(LIBGCC2)" \ |
| dir="$${dir}" stmp-multilib-sub; \ |
| if [ $$? -eq 0 ] ; then true; else exit 1; fi; \ |
| done |
| touch stmp-multilib |
| |
| # Subroutine of stmp-multilib so make -n works. |
| stmp-multilib-sub: |
| rm -f $(LIBGCC2) |
| if [ -d $(dir) ]; then \ |
| cd $(dir); \ |
| rm -f libgcc.a $(EXTRA_MULTILIB_PARTS); \ |
| else true; \ |
| fi |
| $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \ |
| AR_FOR_TARGET="$(AR_FOR_TARGET)" \ |
| AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \ |
| CC="$(CC)" CFLAGS="$(CFLAGS)" \ |
| HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \ |
| LANGUAGES="$(LANGUAGES)" \ |
| LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC2) |
| if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \ |
| then true; \ |
| else rm -f $(LIBGCC1); \ |
| fi |
| if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \ |
| then true; \ |
| else \ |
| $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \ |
| AR_FOR_TARGET="$(AR_FOR_TARGET)" \ |
| AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \ |
| CC="$(CC)" CFLAGS="$(CFLAGS)" \ |
| HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \ |
| LANGUAGES="$(LANGUAGES)" \ |
| LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC1); \ |
| fi |
| rm -rf tmplibgcc.a tmpcopy |
| mkdir tmpcopy |
| if [ x$(LIBGCC1) != x ]; \ |
| then (cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC1)); \ |
| else true; \ |
| fi |
| (cd tmpcopy; $(AR_FOR_TARGET) x ../$(LIBGCC2)) |
| (cd tmpcopy; $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) ../tmplibgcc.a *$(objext)) |
| rm -rf libgcc2.a tmpcopy |
| if $(RANLIB_TEST_FOR_TARGET) ; then \ |
| $(RANLIB_FOR_TARGET) tmplibgcc.a; \ |
| else true; fi |
| if [ -d $(dir) ]; then true; else mkdir $(dir); fi |
| mv tmplibgcc.a $(dir)/libgcc.a |
| for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \ |
| AR_FOR_TARGET="$(AR_FOR_TARGET)" \ |
| AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \ |
| CC="$(CC)" CFLAGS="$(CFLAGS)" \ |
| HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \ |
| LANGUAGES="$(LANGUAGES)" \ |
| MULTILIB_CFLAGS="$(MULTILIB_CFLAGS)" T="t" t$${f}; \ |
| mv t$${f} $(dir)/$${f}; \ |
| else true; \ |
| fi; done |
| |
| # Compile two additional files that are linked with every program |
| # linked using GCC on systems using COFF or ELF, for the sake of C++ |
| # constructors. |
| $(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \ |
| defaults.h frame.h gbl-ctors.h |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \ |
| -finhibit-size-directive -fno-inline-functions -fno-exceptions $(CRTSTUFF_T_CFLAGS) \ |
| -c $(srcdir)/crtstuff.c -DCRT_BEGIN -o $(T)crtbegin$(objext) |
| |
| $(T)crtend.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \ |
| defaults.h frame.h gbl-ctors.h |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \ |
| -finhibit-size-directive -fno-inline-functions -fno-exceptions $(CRTSTUFF_T_CFLAGS) \ |
| -c $(srcdir)/crtstuff.c -DCRT_END -o $(T)crtend$(objext) |
| |
| # On some systems we also want to install versions of these files |
| # compiled using PIC for use in shared libraries. |
| crtbeginS.o crtendS.o: s-crtS ; @true |
| |
| s-crtS: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \ |
| defaults.h frame.h gbl-ctors.h |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \ |
| -DCRT_BEGIN -DCRTSTUFFS_O -finhibit-size-directive -fno-inline-functions \ |
| -fno-exceptions -g0 -c $(srcdir)/crtstuff.c |
| mv crtstuff$(objext) crtbeginS$(objext) |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \ |
| -DCRT_END -DCRTSTUFFS_O -finhibit-size-directive -fno-inline-functions \ |
| -fno-exceptions -g0 -c $(srcdir)/crtstuff.c -o crtendS$(objext) |
| touch s-crtS |
| |
| # Compile the start modules crt0.o and mcrt0.o that are linked with every program |
| crt0.o: s-crt0 ; @true |
| mcrt0.o: s-crt0; @true |
| |
| s-crt0: $(CRT0_S) $(MCRT0_S) $(GCC_PASSES) $(CONFIG_H) |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \ |
| -o crt0.o -c $(CRT0_S) |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \ |
| -o mcrt0.o -c $(MCRT0_S) |
| touch s-crt0 |
| # |
| # Compiling object files from source files. |
| |
| # Note that dependencies on obstack.h are not written |
| # because that file is not part of GCC. |
| |
| # C language specific files. |
| |
| c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \ |
| $(srcdir)/c-parse.h c-tree.h input.h flags.h system.h toplev.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c |
| $(srcdir)/c-parse.h: $(srcdir)/c-parse.c |
| $(srcdir)/c-parse.c: $(srcdir)/c-parse.y |
| cd $(srcdir); $(BISON) $(BISONFLAGS) -d c-parse.y -o c-parse.c |
| $(srcdir)/c-parse.y: c-parse.in |
| echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y |
| sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \ |
| -e "/^ifc$$/d" -e "/^end ifc$$/d" \ |
| $(srcdir)/c-parse.in >>tmp-c-parse.y |
| $(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y |
| |
| $(srcdir)/c-gperf.h: c-parse.gperf |
| gperf -L C -F ', 0, 0' -p -j1 -i 1 -g -o -t -G -N is_reserved_word \ |
| -k1,3,$$ $(srcdir)/c-parse.gperf >tmp-gperf.h |
| $(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h |
| |
| c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h flags.h \ |
| output.h toplev.h |
| c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h \ |
| intl.h output.h $(EXPR_H) $(RTL_H) toplev.h |
| c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h toplev.h \ |
| output.h |
| c-lex.o : c-lex.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-lex.h c-tree.h \ |
| $(srcdir)/c-parse.h input.h intl.h flags.h $(srcdir)/c-gperf.h c-pragma.h \ |
| toplev.h output.h mbchar.h |
| c-aux-info.o : c-aux-info.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h |
| c-convert.o : c-convert.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h |
| c-pragma.o: c-pragma.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) except.h \ |
| function.h defaults.h c-pragma.h toplev.h |
| c-iterate.o: c-iterate.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-tree.h \ |
| flags.h toplev.h $(EXPR_H) |
| mbchar.o: mbchar.c $(CONFIG_H) system.h mbchar.h |
| graph.o: graph.c $(CONFIG_H) system.h toplev.h flags.h output.h $(RTL_H) \ |
| hard-reg-set.h $(BASIC_BLOCK_H) |
| sbitmap.o: sbitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) |
| |
| COLLECT2_OBJS = collect2.o tlink.o hash.o intl.o underscore.o version.o |
| collect2$(exeext): $(COLLECT2_OBJS) $(LIBDEPS) |
| # Don't try modifying collect2 (aka ld) in place--it might be linking this. |
| -rm -f collect2$(exeext) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(COLLECT2_OBJS) $(LIBS) |
| |
| collect2.o : collect2.c $(CONFIG_H) system.h gstab.h intl.h \ |
| $(srcdir)/../include/obstack.h $(DEMANGLE_H) collect2.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \ |
| -c `echo $(srcdir)/collect2.c | sed 's,^\./,,'` |
| |
| tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h toplev.h collect2.h |
| hash.o: hash.c hash.h system.h toplev.h |
| |
| vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(CONFIG_H) system.h |
| rm -f vfprintf.c |
| $(LN_S) $(srcdir)/../libiberty/vfprintf.c vfprintf.c |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) vfprintf.c |
| |
| splay-tree.o: $(srcdir)/../libiberty/splay-tree.c \ |
| $(srcdir)/../include/splay-tree.h $(srcdir)/../include/libiberty.h |
| rm -f splay-tree.c |
| $(LN_S) $(srcdir)/../libiberty/splay-tree.c splay-tree.c |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) splay-tree.c |
| |
| underscore.c: s-under ; @true |
| |
| s-under: $(GCC_PASSES) |
| echo "int xxy_us_dummy;" >tmp-dum.c |
| $(GCC_FOR_TARGET) -S tmp-dum.c |
| echo '/*WARNING: This file is automatically generated!*/' >tmp-under.c |
| if grep _xxy_us_dummy tmp-dum.s > /dev/null ; then \ |
| echo "int prepends_underscore = 1;" >>tmp-under.c; \ |
| else \ |
| echo "int prepends_underscore = 0;" >>tmp-under.c; \ |
| fi |
| $(srcdir)/move-if-change tmp-under.c underscore.c |
| -rm -f tmp-dum.c tmp-dum.s |
| touch s-under |
| |
| # A file used by all variants of C. |
| |
| c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h \ |
| flags.h toplev.h output.h c-pragma.h $(RTL_H) |
| |
| # Language-independent files. |
| |
| DRIVER_DEFINES = \ |
| -DSTANDARD_STARTFILE_PREFIX=\"$(libdir)/\" \ |
| -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-lib/\" \ |
| -DDEFAULT_TARGET_VERSION=\"$(version)\" \ |
| -DDEFAULT_TARGET_MACHINE=\"$(target_alias)\" \ |
| -DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\" |
| gcc.o: gcc.c $(CONFIG_H) system.h intl.h multilib.h \ |
| Makefile $(lang_specs_files) prefix.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| $(DRIVER_DEFINES) \ |
| -c `echo $(srcdir)/gcc.c | sed 's,^\./,,'` |
| |
| gccspec.o: gccspec.c $(CONFIG_H) system.h |
| cppspec.o: cppspec.c $(CONFIG_H) system.h |
| |
| tree-check.h: s-check ; @true |
| s-check : gencheck $(srcdir)/move-if-change |
| ./gencheck > tmp-check.h |
| $(srcdir)/move-if-change tmp-check.h tree-check.h |
| touch s-check |
| |
| gencheck : gencheck.o $(lang_tree_files) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| gencheck.o $(HOST_LIBS) |
| |
| gencheck.o : gencheck.c tree.def $(CONFIG_H) hconfig.h system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \ |
| $(srcdir)/gencheck.c |
| |
| dumpvers: dumpvers.c |
| |
| version.o: version.c |
| obstack.o: $(srcdir)/../libiberty/obstack.c $(CONFIG_H) |
| rm -f obstack.c |
| $(LN_S) $(srcdir)/../libiberty/obstack.c obstack.c |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) obstack.c |
| |
| prefix.o: prefix.c $(CONFIG_H) system.h Makefile prefix.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DPREFIX=\"$(prefix)\" \ |
| -c `echo $(srcdir)/prefix.c | sed 's,^\./,,'` |
| |
| convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h toplev.h |
| |
| tree.o : tree.c $(CONFIG_H) system.h $(TREE_H) flags.h function.h toplev.h except.h |
| print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H) |
| stor-layout.o : stor-layout.c $(CONFIG_H) system.h $(TREE_H) flags.h \ |
| function.h $(EXPR_H) $(RTL_H) toplev.h except.h |
| fold-const.o : fold-const.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h \ |
| $(RTL_H) |
| toplev.o : toplev.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) \ |
| flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \ |
| insn-codes.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h dwarfout.h \ |
| dwarf2out.h sdbout.h dbxout.h $(EXPR_H) $(BASIC_BLOCK_H) \ |
| $(lang_options_files) |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \ |
| -DTARGET_NAME=\"$(target_alias)\" \ |
| -c `echo $(srcdir)/toplev.c | sed 's,^\./,,'` |
| |
| rtl.o : rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h |
| |
| print-rtl.o : print-rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h basic-block.h |
| rtlanal.o : rtlanal.c $(CONFIG_H) system.h $(RTL_H) |
| |
| varasm.o : varasm.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h \ |
| function.h defaults.h $(EXPR_H) hard-reg-set.h $(REGS_H) \ |
| xcoffout.h output.h c-pragma.h toplev.h except.h dbxout.h sdbout.h |
| function.o : function.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \ |
| function.h insn-flags.h insn-codes.h $(EXPR_H) $(REGS_H) hard-reg-set.h \ |
| insn-config.h $(RECOG_H) output.h toplev.h except.h hash.h |
| stmt.o : stmt.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \ |
| insn-flags.h insn-config.h insn-codes.h hard-reg-set.h $(EXPR_H) except.h \ |
| loop.h $(RECOG_H) toplev.h output.h varray.h |
| except.o : except.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \ |
| function.h insn-flags.h $(EXPR_H) $(REGS_H) hard-reg-set.h \ |
| insn-config.h $(RECOG_H) output.h except.h toplev.h |
| expr.o : expr.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \ |
| $(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h $(RECOG_H) output.h \ |
| typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h |
| calls.o : calls.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h $(EXPR_H) \ |
| insn-flags.h $(REGS_H) toplev.h output.h |
| expmed.o : expmed.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \ |
| insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) real.h |
| explow.o : explow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \ |
| hard-reg-set.h insn-config.h $(EXPR_H) $(RECOG_H) insn-flags.h insn-codes.h |
| optabs.o : optabs.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \ |
| insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) reload.h |
| dbxout.o : dbxout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h $(REGS_H) \ |
| insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \ |
| toplev.h |
| sdbout.o : sdbout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h except.h \ |
| function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) defaults.h real.h \ |
| insn-config.h $(srcdir)/../include/obstack.h xcoffout.h c-pragma.h \ |
| sdbout.h toplev.h |
| dwarfout.o : dwarfout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf.h \ |
| flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h |
| dwarf2out.o : dwarf2out.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf2.h \ |
| flags.h insn-config.h reload.h output.h defaults.h \ |
| hard-reg-set.h $(REGS_H) $(EXPR_H) toplev.h dwarf2out.h dyn-string.h |
| xcoffout.o : xcoffout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) xcoffout.h \ |
| flags.h toplev.h output.h dbxout.h |
| emit-rtl.o : emit-rtl.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \ |
| except.h function.h $(REGS_H) insn-config.h $(RECOG_H) real.h \ |
| $(EXPR_H) $(srcdir)/../include/obstack.h hard-reg-set.h bitmap.h |
| real.o : real.c $(CONFIG_H) system.h $(TREE_H) toplev.h |
| getpwd.o : getpwd.c $(CONFIG_H) system.h |
| |
| integrate.o : integrate.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \ |
| integrate.h insn-flags.h insn-config.h $(EXPR_H) real.h $(REGS_H) \ |
| intl.h function.h output.h $(RECOG_H) except.h toplev.h |
| |
| jump.o : jump.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h $(REGS_H) \ |
| insn-config.h insn-flags.h $(RECOG_H) $(EXPR_H) real.h except.h \ |
| toplev.h insn-attr.h |
| stupid.o : stupid.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h \ |
| $(BASIC_BLOCK_H) insn-config.h reload.h flags.h toplev.h |
| |
| cse.o : cse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \ |
| real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h \ |
| $(srcdir)/../include/splay-tree.h |
| gcse.o : gcse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \ |
| real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) output.h |
| resource.o : resource.c $(CONFIG_H) $(RTL_H) hard-reg-set.h system.h \ |
| $(BASIC_BLOCK_H) $(REGS_H) flags.h output.h resource.h |
| lcm.o : lcm.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \ |
| real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) |
| profile.o : profile.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-flags.h \ |
| gcov-io.h $(TREE_H) output.h $(REGS_H) toplev.h insn-config.h |
| loop.o : loop.c $(CONFIG_H) system.h $(RTL_H) flags.h loop.h insn-config.h \ |
| insn-flags.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) real.h \ |
| toplev.h varray.h |
| unroll.o : unroll.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \ |
| integrate.h $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) loop.h toplev.h varray.h |
| flow.o : flow.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-config.h \ |
| $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h recog.h \ |
| insn-flags.h |
| combine.o : combine.c $(CONFIG_H) system.h $(RTL_H) flags.h \ |
| insn-config.h insn-flags.h insn-codes.h insn-attr.h $(REGS_H) $(EXPR_H) \ |
| $(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h |
| regclass.o : regclass.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h flags.h \ |
| $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h real.h toplev.h \ |
| output.h |
| local-alloc.o : local-alloc.c $(CONFIG_H) system.h $(RTL_H) flags.h \ |
| $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) output.h \ |
| insn-attr.h toplev.h |
| bitmap.o : bitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) \ |
| $(REGS_H) |
| global.o : global.c $(CONFIG_H) system.h $(RTL_H) flags.h reload.h \ |
| $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h toplev.h |
| varray.o : varray.c $(CONFIG_H) system.h varray.h $(RTL_H) $(TREE_H) bitmap.h |
| |
| reload.o : reload.c $(CONFIG_H) system.h $(RTL_H) flags.h output.h $(EXPR_H) \ |
| reload.h $(RECOG_H) hard-reg-set.h insn-config.h insn-codes.h $(REGS_H) \ |
| real.h toplev.h |
| reload1.o : reload1.c $(CONFIG_H) system.h $(RTL_H) real.h flags.h $(EXPR_H) \ |
| reload.h $(REGS_H) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \ |
| $(BASIC_BLOCK_H) $(RECOG_H) output.h toplev.h |
| caller-save.o : caller-save.c $(CONFIG_H) system.h $(RTL_H) flags.h \ |
| $(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) \ |
| $(RECOG_H) reload.h $(EXPR_H) toplev.h |
| reorg.o : reorg.c $(CONFIG_H) system.h $(RTL_H) conditions.h hard-reg-set.h \ |
| $(BASIC_BLOCK_H) $(REGS_H) insn-config.h insn-attr.h \ |
| insn-flags.h $(RECOG_H) flags.h output.h $(EXPR_H) |
| alias.o : alias.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h \ |
| $(REGS_H) toplev.h output.h $(EXPR_H) |
| regmove.o : regmove.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \ |
| $(RECOG_H) output.h reload.h $(REGS_H) hard-reg-set.h flags.h \ |
| $(EXPR_H) insn-flags.h $(BASIC_BLOCK_H) toplev.h |
| $(SCHED_PREFIX)sched.o : $(SCHED_PREFIX)sched.c $(CONFIG_H) system.h $(RTL_H) \ |
| $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h \ |
| insn-attr.h toplev.h recog.h |
| final.o : final.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h intl.h \ |
| $(REGS_H) $(RECOG_H) conditions.h insn-config.h insn-attr.h except.h real.h \ |
| output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h \ |
| defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h dbxout.h |
| recog.o : recog.c $(CONFIG_H) system.h $(RTL_H) \ |
| $(REGS_H) $(RECOG_H) hard-reg-set.h flags.h insn-config.h insn-attr.h \ |
| insn-flags.h insn-codes.h real.h toplev.h |
| reg-stack.o : reg-stack.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) recog.h \ |
| $(REGS_H) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h |
| dyn-string.o: dyn-string.c dyn-string.h $(CONFIG_H) system.h |
| |
| $(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) \ |
| $(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \ |
| insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file) |
| |
| # Build auxiliary files that support ecoff format. |
| mips-tfile: mips-tfile.o version.o $(LIBDEPS) |
| $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS) |
| |
| mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) system.h machmode.h |
| |
| mips-tdump: mips-tdump.o version.o $(LIBDEPS) |
| $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS) |
| |
| mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H) system.h |
| |
| # Build file to support OSF/rose half-pic format. |
| halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H) system.h |
| |
| # Normally this target is not used; but it is used if you |
| # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c |
| # from the GNU Emacs distribution. |
| alloca.o: $(srcdir)/../libiberty/alloca.c |
| rm -f alloca.c |
| $(LN_S) $(srcdir)/../libiberty/alloca.c alloca.c |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(ALLOCA_FLAGS) \ |
| -c `echo alloca.c | sed 's,^\./,,'` |
| $(ALLOCA_FINISH) |
| # |
| # Generate header and source files from the machine description, |
| # and compile them. |
| |
| .PRECIOUS: insn-config.h insn-flags.h insn-codes.h \ |
| insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \ |
| insn-attr.h insn-attrtab.c |
| |
| # The following pair of rules has this effect: |
| # genconfig is run only if the md has changed since genconfig was last run; |
| # but the file insn-config.h is touched only when its contents actually change. |
| |
| # Each of the other insn-* files is handled by a similar pair of rules. |
| |
| # This causes an anomaly in the results of make -n |
| # because insn-* is older than s-* |
| # and thus make -n thinks that insn-* will be updated |
| # and force recompilation of things that depend on it. |
| # We use move-if-change precisely to avoid such recompilation. |
| # But there is no way to teach make -n that it will be avoided. |
| |
| # Each of the insn-*.[ch] rules has a semicolon at the end, |
| # for otherwise the system Make on SunOS 4.1 never tries |
| # to recompile insn-*.o. To avoid problems and extra noise from |
| # versions of make which don't like empty commands (nothing after the |
| # trailing `;'), we call true for each. |
| |
| insn-config.h: s-config ; @true |
| s-config : $(md_file) genconfig $(srcdir)/move-if-change |
| ./genconfig $(md_file) > tmp-config.h |
| $(srcdir)/move-if-change tmp-config.h insn-config.h |
| touch s-config |
| |
| insn-flags.h: s-flags ; @true |
| s-flags : $(md_file) genflags $(srcdir)/move-if-change |
| ./genflags $(md_file) > tmp-flags.h |
| $(srcdir)/move-if-change tmp-flags.h insn-flags.h |
| touch s-flags |
| |
| insn-codes.h: s-codes ; @true |
| s-codes : $(md_file) gencodes $(srcdir)/move-if-change |
| ./gencodes $(md_file) > tmp-codes.h |
| $(srcdir)/move-if-change tmp-codes.h insn-codes.h |
| touch s-codes |
| |
| insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) $(EXPR_H) real.h output.h \ |
| insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c |
| |
| insn-emit.c: s-emit ; @true |
| s-emit : $(md_file) genemit $(srcdir)/move-if-change |
| ./genemit $(md_file) > tmp-emit.c |
| $(srcdir)/move-if-change tmp-emit.c insn-emit.c |
| touch s-emit |
| |
| insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h $(RECOG_H) \ |
| real.h output.h flags.h system.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c |
| |
| insn-recog.c: s-recog ; @true |
| s-recog : $(md_file) genrecog $(srcdir)/move-if-change |
| ./genrecog $(md_file) > tmp-recog.c |
| $(srcdir)/move-if-change tmp-recog.c insn-recog.c |
| touch s-recog |
| |
| insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \ |
| insn-config.h flags.h $(RECOG_H) $(EXPR_H) reload.h system.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c |
| |
| insn-opinit.c: s-opinit ; @true |
| s-opinit : $(md_file) genopinit $(srcdir)/move-if-change |
| ./genopinit $(md_file) > tmp-opinit.c |
| $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c |
| touch s-opinit |
| |
| insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H) system.h toplev.h \ |
| insn-config.h recog.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c |
| |
| insn-extract.c: s-extract ; @true |
| s-extract : $(md_file) genextract $(srcdir)/move-if-change |
| ./genextract $(md_file) > tmp-extract.c |
| $(srcdir)/move-if-change tmp-extract.c insn-extract.c |
| touch s-extract |
| |
| insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) $(REGS_H) output.h real.h \ |
| system.h insn-config.h recog.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c |
| |
| insn-peep.c: s-peep ; @true |
| s-peep : $(md_file) genpeep $(srcdir)/move-if-change |
| ./genpeep $(md_file) > tmp-peep.c |
| $(srcdir)/move-if-change tmp-peep.c insn-peep.c |
| touch s-peep |
| |
| insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h \ |
| output.h insn-attr.h insn-config.h system.h toplev.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c |
| |
| insn-attr.h: s-attr ; @true |
| s-attr : $(md_file) genattr $(srcdir)/move-if-change |
| ./genattr $(md_file) > tmp-attr.h |
| $(srcdir)/move-if-change tmp-attr.h insn-attr.h |
| touch s-attr |
| |
| insn-attrtab.c: s-attrtab ; @true |
| s-attrtab : $(md_file) genattrtab $(srcdir)/move-if-change |
| if cmp -s $(PREMADE_ATTRTAB_MD) $(md_file); \ |
| then \ |
| echo Using $(PREMADE_ATTRTAB); \ |
| cp $(PREMADE_ATTRTAB) tmp-attrtab.c; \ |
| else \ |
| ./genattrtab $(md_file) > tmp-attrtab.c; \ |
| fi |
| $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c |
| touch s-attrtab |
| |
| insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h conditions.h \ |
| hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h $(RECOG_H) \ |
| insn-codes.h system.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c |
| |
| insn-output.c: s-output ; @true |
| s-output : $(md_file) genoutput $(srcdir)/move-if-change |
| ./genoutput $(md_file) > tmp-output.c |
| $(srcdir)/move-if-change tmp-output.c insn-output.c |
| touch s-output |
| |
| genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) system.h |
| genrtl.c genrtl.h : s-genrtl |
| @true # force gnu make to recheck modification times. |
| |
| s-genrtl: gengenrtl $(srcdir)/move-if-change $(RTL_BASE_H) |
| ./gengenrtl tmp-genrtl.h tmp-genrtl.c |
| $(srcdir)/move-if-change tmp-genrtl.h genrtl.h |
| $(srcdir)/move-if-change tmp-genrtl.c genrtl.c |
| touch s-genrtl |
| |
| # |
| # Compile the programs that generate insn-* from the machine description. |
| # They are compiled with $(HOST_CC), and associated libraries, |
| # since they need to run on this machine |
| # even if GCC is being compiled to run on some other machine. |
| |
| # $(CONFIG_H) is omitted from the deps of the gen*.o |
| # because these programs don't really depend on anything |
| # about the target machine. They do depend on config.h itself, |
| # since that describes the host machine. |
| |
| # Pass the md file through cpp if the target requests it. |
| $(MD_FILE): $(MD_DEPS) |
| rm -f $@ |
| $(MD_CPP) $(MD_CPPFLAGS) $(md_file) | sed 's/^# /; /g' > tmp-$@ |
| mv tmp-$@ $@ |
| |
| genconfig : genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| genconfig.o : genconfig.c $(RTL_H) $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c |
| |
| genflags : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| genflags.o : genflags.c $(RTL_H) $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c |
| |
| gencodes : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| gencodes.o : gencodes.c $(RTL_H) $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c |
| |
| genemit : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c |
| |
| genopinit : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| genopinit.o : genopinit.c $(RTL_H) $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c |
| |
| genrecog : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c |
| |
| genextract : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| genextract.o : genextract.c $(RTL_H) $(build_xm_file) system.h insn-config.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c |
| |
| genpeep : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c |
| |
| genattr : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c |
| |
| genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBS) |
| |
| genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) system.h insn-config.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c |
| |
| genoutput : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS) |
| |
| genoutput.o : genoutput.c $(RTL_H) $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c |
| |
| gengenrtl : gengenrtl.o $(HOST_LIBDEPS) |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \ |
| gengenrtl.o $(HOST_LIBS) |
| |
| gengenrtl.o : gengenrtl.c $(RTL_BASE_H) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gengenrtl.c |
| |
| # |
| # Compile the libraries to be used by gen*. |
| # If we are not cross-building, gen* use the same .o's that cc1 will use, |
| # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict |
| # with the rules for rtl.o, alloca.o, etc. |
| $(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h |
| rm -f $(HOST_PREFIX)rtl.c |
| sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c |
| |
| $(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(CONFIG_H) $(RTL_H) \ |
| bitmap.h basic-block.h |
| rm -f $(HOST_PREFIX)print-rtl.c |
| sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c |
| |
| $(HOST_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(CONFIG_H) system.h $(RTL_H) \ |
| flags.h $(BASIC_BLOCK_H) $(REGS_H) |
| rm -f $(HOST_PREFIX)bitmap.c |
| sed -e 's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c > $(HOST_PREFIX)bitmap.c |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)bitmap.c |
| |
| $(HOST_PREFIX_1)rtlanal.o: $(srcdir)/rtlanal.c $(CONFIG_H) $(RTL_H) |
| rm -f $(HOST_PREFIX)rtlanal.c |
| sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c > $(HOST_PREFIX)rtlanal.c |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtlanal.c |
| |
| $(HOST_PREFIX_1)alloca.o: $(srcdir)/../libiberty/alloca.c |
| rm -f $(HOST_PREFIX)alloca.c |
| $(LN_S) $(srcdir)/../libiberty/alloca.c $(HOST_PREFIX)alloca.c |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c |
| |
| $(HOST_PREFIX_1)obstack.o: $(srcdir)/../libiberty/obstack.c |
| rm -f $(HOST_PREFIX)obstack.c |
| sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/obstack.c > $(HOST_PREFIX)obstack.c |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c |
| |
| $(HOST_PREFIX_1)vfprintf.o: $(srcdir)/../libiberty/vfprintf.c |
| rm -f $(HOST_PREFIX)vfprintf.c |
| sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/vfprintf.c > $(HOST_PREFIX)vfprintf.c |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)vfprintf.c |
| |
| $(HOST_PREFIX_1)doprint.o: doprint.c |
| rm -f $(HOST_PREFIX)doprint.c |
| sed -e 's/config[.]h/hconfig.h/' $(srcdir)/doprint.c > $(HOST_PREFIX)doprint.c |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)doprint.c |
| |
| $(HOST_PREFIX_1)malloc.o: malloc.c |
| rm -f $(HOST_PREFIX)malloc.c |
| sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c |
| |
| # This satisfies the dependency that we get if you cross-compile a compiler |
| # that does not need to compile alloca, malloc or whatever. |
| $(HOST_PREFIX_1): |
| touch $(HOST_PREFIX_1) |
| |
| |
| # |
| # Remake internationalization support. |
| |
| intl.o: intl.c intl.h gansidecl.h Makefile |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DLOCALEDIR=\"$(localedir)\" \ |
| -c `echo $(srcdir)/intl.c | sed 's,^\./,,'` |
| |
| # This is needed to when doing a partial build after a `make clean'. |
| # libintl.a does not depend on intl.all, |
| # as that would force a lot of recompiling. |
| $(top_builddir)/intl/libintl.a: |
| @echo "$(MAKE) intl.all" |
| @$(MAKE) $(FLAGS_TO_PASS) intl.all |
| |
| # Make sure all the headers are there for xgettext to scan. |
| $(INTL_TARGETS): $(srcdir)/c-gperf.h \ |
| $(srcdir)/c-parse.c $(srcdir)/c-parse.h $(srcdir)/cexp.c |
| |
| intl.all intl.install intl.uninstall intl.distdir \ |
| intl.mostlyclean intl.clean intl.distclean intl.maintainer-clean: |
| @for d in $(INTL_SUBDIRS); do \ |
| target=`expr $@ : 'intl.\(.*\)'` && \ |
| echo "(cd $$d && $(MAKE) $$target)" && \ |
| (cd $$d && AWK='$(AWK)' $(MAKE) $(SUBDIR_FLAGS_TO_PASS) $$target); \ |
| done |
| |
| # intl.distdir doesn't copy the intl makefiles (since they aren't distributed), |
| # but we need them for the `make extraclean' in distdir-finish. |
| intl.distdir-fixup: |
| for d in $(INTL_SUBDIRS); do \ |
| ln $$d/Makefile tmp/$$d || cp $$d/Makefile tmp/$$d || exit; \ |
| done |
| # |
| # Remake cpp and protoize. |
| |
| # Making the preprocessor |
| cpp$(exeext): $(CCCP)$(exeext) |
| -rm -f cpp$(exeext) |
| $(LN) $(CCCP)$(exeext) cpp$(exeext) |
| CCCP_OBJS = cccp.o cexp.o intl.o prefix.o version.o @extra_cpp_objs@ mbchar.o |
| cccp$(exeext): $(CCCP_OBJS) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(CCCP_OBJS) $(LIBS) |
| cexp.o: $(srcdir)/cexp.c $(CONFIG_H) system.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c |
| $(srcdir)/cexp.c: $(srcdir)/cexp.y |
| cd $(srcdir); $(BISON) -o cexp.c cexp.y |
| |
| # We use $(libsubdir)/$(unlibsubdir) to match the |
| # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used. |
| cccp.o: cccp.c $(CONFIG_H) intl.h pcp.h version.c config.status system.h \ |
| mbchar.h prefix.h Makefile.in |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \ |
| -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \ |
| -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \ |
| -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \ |
| -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \ |
| -c `echo $(srcdir)/cccp.c | sed 's,^\./,,'` |
| |
| LIBCPP_OBJS = cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \ |
| cppinit.o cppulp.o prefix.o version.o mbchar.o @extra_cpp_objs@ |
| |
| # All the other archives built/used by this makefile are for targets. This |
| # one is strictly for the host. |
| # |
| libcpp.a: $(LIBCPP_OBJS) |
| $(AR) $(AR_FLAGS) libcpp.a $(LIBCPP_OBJS) |
| if $(RANLIB_TEST) ; then $(RANLIB) libcpp.a ; else true ; fi |
| |
| cppmain$(exeext): cppmain.o intl.o libcpp.a $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cppmain$(exeext) cppmain.o \ |
| intl.o libcpp.a $(LIBS) |
| |
| cppmain.o: cppmain.c $(CONFIG_H) cpplib.h intl.h system.h |
| |
| cppulp.o: cppulp.c $(CONFIG_H) system.h output.h |
| cpplib.o: cpplib.c $(CONFIG_H) cpplib.h intl.h system.h cpphash.h |
| cpphash.o: cpphash.c $(CONFIG_H) cpplib.h intl.h system.h cpphash.h |
| cppalloc.o: cppalloc.c $(CONFIG_H) cpplib.h intl.h system.h |
| cpperror.o: cpperror.c $(CONFIG_H) cpplib.h intl.h system.h |
| cppexp.o: cppexp.c $(CONFIG_H) cpplib.h intl.h system.h |
| cppfiles.o: cppfiles.c $(CONFIG_H) cpplib.h intl.h system.h |
| |
| cppinit.o: cppalloc.c $(CONFIG_H) cpplib.h intl.h system.h \ |
| cpphash.h prefix.h output.h Makefile |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \ |
| -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \ |
| -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \ |
| -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \ |
| -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \ |
| -c `echo $(srcdir)/cppinit.c | sed 's,^\./,,'` |
| |
| # Note for the stamp targets, we run the program `true' instead of |
| # having an empty command (nothing following the semicolon). |
| |
| proto: config.status protoize$(exeext) unprotoize$(exeext) SYSCALLS.c.X |
| |
| PROTO_OBJS = getpwd.o intl.o version.o |
| |
| protoize$(exeext): protoize.o $(PROTO_OBJS) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ protoize.o $(PROTO_OBJS) $(LIBS) |
| |
| unprotoize$(exeext): unprotoize.o $(PROTO_OBJS) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ unprotoize.o $(PROTO_OBJS) $(LIBS) |
| |
| protoize.o: protoize.c $(srcdir)/../include/getopt.h $(CONFIG_H) system.h \ |
| Makefile |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \ |
| -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \ |
| -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \ |
| -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \ |
| -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \ |
| -DSTD_PROTO_DIR=\"$(libsubdir)\" \ |
| $(srcdir)/protoize.c |
| |
| unprotoize.o: unprotoize.c protoize.c $(srcdir)/../include/getopt.h \ |
| $(CONFIG_H) system.h Makefile |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \ |
| -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \ |
| -DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \ |
| -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \ |
| -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \ |
| -DSTD_PROTO_DIR=\"$(libsubdir)\" \ |
| $(srcdir)/unprotoize.c |
| |
| # This info describes the target machine, so compile with GCC just built. |
| SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \ |
| stmp-int-hdrs |
| -rm -f SYSCALLS.c tmp-SYSCALLS.s |
| cat $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -aux-info $@ -S -o tmp-SYSCALLS.s SYSCALLS.c |
| -rm -f SYSCALLS.c tmp-SYSCALLS.s |
| |
| |
| test-protoize-simple: ./protoize ./unprotoize $(GCC_PASSES) |
| -rm -f tmp-proto.[cso] |
| cp $(srcdir)/protoize.c tmp-proto.c |
| chmod u+w tmp-proto.c |
| ./protoize -N -B ./ -x getopt.h -c "-B./ -Wall -Wwrite-strings \ |
| $(CFLAGS) $(INCLUDES) \ |
| -DGCC_INCLUDE_DIR=0 \ |
| -DGPLUSPLUS_INCLUDE_DIR=0 \ |
| -DCROSS_INCLUDE_DIR=0 \ |
| -DTOOL_INCLUDE_DIR=0 \ |
| -DSTD_PROTO_DIR=0" tmp-proto.c |
| @echo '**********' Expect 400 lines of differences. |
| -diff $(srcdir)/protoize.c tmp-proto.c > tmp-proto.diff |
| -wc -l tmp-proto.diff |
| ./unprotoize -N -x getopt.h -c "-B./ -Wall -Wwrite-strings \ |
| $(CFLAGS) $(INCLUDES) \ |
| -DGCC_INCLUDE_DIR=0 \ |
| -DGPLUSPLUS_INCLUDE_DIR=0 \ |
| -DCROSS_INCLUDE_DIR=0 \ |
| -DTOOL_INCLUDE_DIR=0 \ |
| -DSTD_PROTO_DIR=0" tmp-proto.c |
| @echo Expect zero differences. |
| diff $(srcdir)/protoize.c tmp-proto.c | cat |
| -rm -f tmp-proto.[cs] tmp-proto$(objext) |
| |
| gcov.o: gcov.c gcov-io.h intl.h system.h |
| |
| # Only one of 'gcov' or 'gcov.exe' is actually built, depending |
| # upon whether $(exeext) is empty or not. |
| GCOV_OBJS = gcov.o intl.o |
| gcov$(exeext): $(GCOV_OBJS) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) $(GCOV_OBJS) $(LIBS) -o $@ |
| # |
| # Build the include directory. The stamp files are stmp-* rather than |
| # s-* so that mostlyclean does not force the include directory to |
| # be rebuilt. |
| |
| # Build the include directory including float.h (which no longer depends upon |
| # enquire). |
| stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h |
| # Copy in the headers provided with gcc. |
| # The sed command gets just the last file name component; |
| # this is necessary because VPATH could add a dirname. |
| # Using basename would be simpler, but some systems don't have it. |
| # The touch command is here to workaround an AIX/Linux NFS bug. |
| for file in .. $(USER_H); do \ |
| if [ X$$file != X.. ]; then \ |
| realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \ |
| touch include/$$realfile; \ |
| rm -f include/$$realfile; \ |
| cp $$file include; \ |
| chmod a+r include/$$realfile; \ |
| fi; \ |
| done |
| rm -f include/limits.h |
| cp xlimits.h include/limits.h |
| chmod a+r include/limits.h |
| rm -f include/float.h |
| if [ x$(FLOAT_H) != xMakefile.in ]; then \ |
| cp $(srcdir)/config/$(FLOAT_H) include/float.h && \ |
| chmod a+r include/float.h; \ |
| else :; fi |
| # Install the README |
| rm -f include/README |
| cp $(srcdir)/README-fixinc include/README |
| chmod a+r include/README |
| touch $@ |
| |
| # Now that float.h no longer depends upon enquire, this is actually a no-op. |
| stmp-headers: |
| touch $@ |
| |
| fixinc.sh: $(srcdir)/fixinc/mkfixinc.sh |
| MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \ |
| export MAKE srcdir ; \ |
| cd ./fixinc; $(SHELL) $${srcdir}/mkfixinc.sh $(target) |
| |
| ##stmp-fixinc: $(FIXINCLUDES) gsyslimits.h |
| ## rm -rf include |
| ## mkdir include |
| ## if [ x$(FIXINCLUDES) != xMakefile.in ]; \ |
| ## then \ |
| ## for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \ |
| ## if [ -d $$dir ]; \ |
| ## then \ |
| ## $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \ |
| ## else true; fi; \ |
| ## done; \ |
| ## if [ x$(INSTALL_ASSERT_H) != x ] ; \ |
| ## then \ |
| ## rm -f include/assert.h; \ |
| ## cp $(srcdir)/assert.h include/assert.h; \ |
| ## chmod a+r include/assert.h; \ |
| ## fi \ |
| ## else true; \ |
| ## fi |
| |
| # Build fixed copies of system files. |
| stmp-fixinc: fixinc.sh gsyslimits.h |
| rm -rf include; mkdir include |
| TARGET_MACHINE=$(target); srcdir=`cd $(srcdir); pwd`; \ |
| INSTALL_ASSERT_H=$(INSTALL_ASSERT_H); \ |
| export TARGET_MACHINE srcdir INSTALL_ASSERT_H; \ |
| $(SHELL) ./fixinc.sh `pwd`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS) |
| rm -f include/syslimits.h |
| if [ -f include/limits.h ]; then \ |
| mv include/limits.h include/syslimits.h; \ |
| else \ |
| cp $(srcdir)/gsyslimits.h include/syslimits.h; \ |
| fi |
| chmod a+r include/syslimits.h |
| # If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and |
| # that directory exists, then make sure that $(libsubdir) exists. |
| # This is because cpp is compiled to find $(tooldir)/include via |
| # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir) |
| # exists. |
| # We deliberately use tooldir instead of gcc_tooldir here. gcc_tooldir |
| # won't work because libsubdir doesn't exist yet. |
| if [ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \ |
| && [ -d $(tooldir)/sys-include ]; then \ |
| if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; fi; \ |
| if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib; fi; \ |
| if [ -d $(libdir)/gcc-lib/$(target_alias) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias) ; fi; \ |
| if [ -d $(libdir)/gcc-lib/$(target_alias)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias)/$(version) ; fi; \ |
| else true; fi |
| |
| touch stmp-fixinc |
| |
| # Files related to the fixproto script. |
| |
| deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs |
| if [ -d $(SYSTEM_HEADER_DIR) ]; \ |
| then \ |
| CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \ |
| export CC; \ |
| $(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h; \ |
| mv tmp-deduced.h deduced.h; \ |
| else \ |
| touch deduced.h; \ |
| fi |
| |
| GEN_PROTOS_OBJS = gen-protos.o scan.o libcpp.a |
| gen-protos: $(GEN_PROTOS_OBJS) $(HOST_LIBDEPS) |
| ${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o gen-protos \ |
| $(GEN_PROTOS_OBJS) $(HOST_LIBS) |
| |
| gen-protos.o: gen-protos.c scan.h $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gen-protos.c |
| |
| scan.o: scan.c scan.h $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c |
| |
| xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile |
| cat deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c |
| mv tmp-fixtmp.c fixtmp.c |
| $(GCC_FOR_TARGET) fixtmp.c -w -U__SIZE_TYPE__ -U__PTRDIFF_TYPE__ -U__WCHAR_TYPE__ -E \ |
| | sed -e 's/ / /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \ |
| | ./gen-protos >xsys-protos.hT |
| mv xsys-protos.hT xsys-protos.h |
| rm -rf fixtmp.c |
| |
| fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS) \ |
| libcpp.a |
| $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ fix-header.o \ |
| scan-decls.o scan.o libcpp.a $(HOST_LIBS) |
| |
| fix-header.o: fix-header.c $(srcdir)/../include/obstack.h scan.h \ |
| xsys-protos.h $(build_xm_file) system.h cpplib.h cpphash.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c |
| |
| scan-decls.o: scan-decls.c scan.h cpplib.h $(build_xm_file) system.h |
| $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c |
| |
| # stmp-fixproto depends on this, not on fix-header directly. |
| # The idea is to make sure fix-header gets built, |
| # but not rerun fixproto after each stage |
| # just because fix-header's mtime has changed. |
| fixhdr.ready: fix-header |
| -if [ -f fixhdr.ready ] ; then \ |
| true; \ |
| else \ |
| touch fixhdr.ready; \ |
| fi |
| |
| # stmp-headers is to make sure fixincludes has already finished. |
| # The if statement is so that we don't run fixproto a second time |
| # if it has already been run on the files in `include'. |
| stmp-fixproto: fixhdr.ready fixproto stmp-headers |
| @echo "Various warnings and error messages from fixproto are normal" |
| -if [ -d include ] ; then true; else mkdir include; fi |
| -if [ -f include/fixed ] ; then true; \ |
| else \ |
| : This line works around a 'make' bug in BSDI 1.1.; \ |
| FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \ |
| if [ -d $(SYSTEM_HEADER_DIR) ] ; then \ |
| $(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \ |
| else true; fi; \ |
| touch include/fixed; \ |
| fi |
| touch stmp-fixproto |
| # |
| # Remake the info files. |
| |
| doc: info |
| info: cpp.info gcc.info lang.info |
| |
| cpp.info: $(srcdir)/cpp.texi |
| $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o cpp.info $(srcdir)/cpp.texi |
| |
| gcc.info: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \ |
| $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \ |
| $(srcdir)/tm.texi $(srcdir)/gcov.texi |
| $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o gcc.info $(srcdir)/gcc.texi |
| |
| dvi: gcc.dvi cpp.dvi lang.dvi |
| |
| # This works with GNU Make's default rule. |
| gcc.dvi: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \ |
| $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \ |
| $(srcdir)/tm.texi $(srcdir)/gcov.texi |
| TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi |
| texindex gcc.?? |
| TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi |
| |
| cpp.dvi: $(srcdir)/cpp.texi |
| TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi |
| texindex cpp.?? |
| TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi |
| |
| |
| INSTALL: $(srcdir)/install1.texi $(srcdir)/install.texi |
| cd $(srcdir); $(MAKEINFO) -D INSTALLONLY \ |
| --no-split -o INSTALL install1.texi |
| # |
| # Deletion of files made during compilation. |
| # There are four levels of this: |
| # `mostlyclean', `clean', `distclean' and `maintainer-clean'. |
| # `mostlyclean' is useful while working on a particular type of machine. |
| # It deletes most, but not all, of the files made by compilation. |
| # It does not delete libgcc.a or its parts, so it won't have to be recompiled. |
| # `clean' deletes everything made by running `make all'. |
| # `distclean' also deletes the files made by config. |
| # `maintainer-clean' also deletes everything that could be regenerated |
| # automatically, except for `configure'. |
| # We remove as much from the language subdirectories as we can |
| # (less duplicated code). |
| |
| |
| mostlyclean: intl.mostlyclean lang.mostlyclean |
| -rm -f $(STAGESTUFF) |
| # Delete the temporary source copies for cross compilation. |
| -rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c |
| -rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c |
| -rm -f $(HOST_PREFIX_1)obstack.c |
| # Delete the temp files made in the course of building libgcc.a. |
| -rm -f tmplibgcc* tmpcopy xlimits.h libgcc1-test |
| for name in $(LIB1FUNCS); do rm -f $${name}.c; done |
| # Delete other built files. |
| -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c |
| # Delete the stamp and temporary files. |
| -rm -f s-* tmp-* stamp-* stmp-* |
| -rm -f */stamp-* */tmp-* |
| # Delete debugging dump files. |
| -rm -f *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop |
| -rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.addressof |
| -rm -f *.regmove *.mach *.bp *.gcse *.flow2 |
| -rm -f */*.greg */*.lreg */*.combine */*.flow */*.cse */*.jump */*.rtl |
| -rm -f */*.tree */*.loop */*.dbr */*.jump2 */*.sched */*.cse2 |
| -rm -f */*.sched2 */*.stack */*.regmove */*.gcse */*.flow2 |
| # Delete some files made during installation. |
| -rm -f specs float.h-* enquire SYSCALLS.c.X SYSCALLS.c |
| -rm -f collect collect2 mips-tfile mips-tdump alloca.s |
| # Delete files generated for fixproto |
| -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \ |
| gen-protos fixproto.list fixtmp.* fixhdr.ready |
| # Delete unwanted output files from TeX. |
| -rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg |
| -rm -f */*.toc */*.log */*.vr */*.fn */*.cp */*.tp */*.ky */*.pg |
| # Delete sorted indices we don't actually use. |
| -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns |
| # Delete core dumps. |
| -rm -f core */core |
| -rm -f *.bp */*.bp |
| |
| # Delete all files made by compilation |
| # that don't exist in the distribution. |
| clean: mostlyclean intl.clean lang.clean |
| # It may not be quite desirable to delete unprotoize.c here, |
| # but the spec for `make clean' requires it. |
| # Using unprotoize.c is not quite right in the first place, |
| # but what better way is there? |
| -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready |
| -rm -f libgcc1.null |
| -rm -f *.dvi |
| -rm -f */*.dvi |
| -if [ -f md.pre-cpp ]; then \ |
| rm -f md ; \ |
| fi |
| # Delete the include directory. |
| -rm -rf include |
| # Delete files used by the "multilib" facility (including libgcc subdirs). |
| -rm -f multilib.h tmpmultilib* |
| -if [ "x$(MULTILIB_DIRNAMES)" != x ] ; then \ |
| rm -rf $(MULTILIB_DIRNAMES); \ |
| else if [ "x$(MULTILIB_OPTIONS)" != x ] ; then \ |
| rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \ |
| fi ; fi |
| -rm -fr stage1 stage2 stage3 stage4 |
| |
| # Delete all files that users would normally create |
| # while building and installing GCC. |
| INTL_DISTCLEAN = intl.distclean |
| distclean: clean $(INTL_DISTCLEAN) lang.distclean |
| -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h |
| -rm -f md cstamp-h |
| -rm -f config.status config.run config.cache config.bak |
| -rm -f Make-lang Make-hooks Make-host Make-target |
| -rm -f Makefile specs.h options.h gencheck.h *.oaux |
| -rm -f gthr-default.h |
| -rm -f */stage1 */stage2 */stage3 */stage4 */include |
| -rm -f c-parse.output |
| -rm -f *.asm |
| -rm -f float.h |
| -rm -f site.exp site.bak testsuite/site.exp testsuite/site.bak |
| -rm -f testsuite/{gcc,g++}.{log,sum} |
| -rm -f intl/libintl.h libintl.h |
| |
| # Delete anything likely to be found in the source directory |
| # that shouldn't be in the distribution. |
| extraclean: distclean lang.extraclean |
| -rm -rf =* ./"#"* *~* config/=* config/"#"* config/*~* |
| -rm -f patch* *.orig *.rej config/patch* config/*.orig config/*.rej |
| -rm -f config/*/=* config/*/"#"* config/*/*~* |
| -rm -f config/*/*.orig config/*/*.rej |
| -rm -f *.dvi *.ps *.oaux *.d *.[zZ] *.gz |
| -rm -f *.tar *.xtar *diff *.diff.* *.tar.* *.xtar.* *diffs |
| -rm -f *lose config/*lose config/*/*lose |
| -rm -f *.s *.s[0-9] *.i config/ChangeLog |
| -rm -f y.tab.c yacc.* |
| -rm -f */=* */"#"* */*~* |
| -rm -f */patch* */*.orig */*.rej |
| -rm -f */*.dvi */*.oaux */*.d */*.[zZ] */*.gz |
| -rm -f */*.tar */*.xtar */*diff */*.diff.* */*.tar.* */*.xtar.* */*diffs |
| -rm -f */*lose */*.s */*.s[0-9] */*.i |
| |
| # Get rid of every file that's generated from some other file, except for `configure'. |
| # Most of these files ARE PRESENT in the GCC distribution. |
| # We define INTL_DISTCLEAN to be empty in the submake, so that |
| # we don't descend into intl after its makefile has been removed. |
| maintainer-clean: |
| @echo 'This command is intended for maintainers to use; it' |
| @echo 'deletes files that may need special tools to rebuild.' |
| $(MAKE) INTL_DISTCLEAN= distclean \ |
| intl.maintainer-clean lang.maintainer-clean |
| -rm -f c-parse.y c-gperf.h |
| -rm -f c-parse.c c-parse.h c-parse.output |
| -rm -f cexp.c cexp.output TAGS |
| -rm -f cpp.info* cpp.??s cpp.*aux |
| -rm -f gcc.info* gcc.??s gcc.*aux |
| # |
| # Entry points `install' and `uninstall'. |
| # Also use `install-collect2' to install collect2 when the config files don't. |
| |
| # The semicolon is to prevent the install.sh -> install default rule |
| # from doing anything. Having it run true helps avoid problems and |
| # noise from versions of make which don't like to have null commands. |
| install: $(INSTALL_TARGET) ; @true |
| |
| # Copy the compiler files into directories where they will be run. |
| # Install the driver last so that the window when things are |
| # broken is small. |
| install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \ |
| $(INSTALL_CPP) install-man install-info intl.install lang.install-normal \ |
| install-driver |
| |
| # Do nothing while making gcc with a cross-compiler. The person who |
| # makes gcc for the target machine has to know how to put a complete |
| # gcc together by hand. |
| install-build: force |
| @echo You have to install gcc on your target machine by hand. |
| |
| # Run this on the target machine |
| # to finish installation of cross compiler. |
| # This is not used anymore now that float.h does not depend on enquire. |
| install-cross-rest: install-float-h-cross |
| |
| # Handle cpp installation. |
| install-cpp: xcpp$(exeext) |
| -rm -f $(bindir)/$(CPP_INSTALL_NAME)$(exeext) |
| $(INSTALL_PROGRAM) -m 755 xcpp$(exeext) $(bindir)/$(CPP_INSTALL_NAME)$(exeext) |
| if [ x$(cpp_install_dir) != x ]; then \ |
| rm -f $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) -m 755 xcpp$(exeext) $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \ |
| else true; fi |
| |
| uninstall-cpp: |
| -rm -f $(bindir)/cpp |
| -if [ x$(cpp_install_dir) != x ]; then \ |
| rm -f $(prefix)/$(cpp_install_dir)/cpp; \ |
| else true; fi |
| |
| # Install float.h for cross compiler. |
| # Run this on the target machine! |
| # This is not used anymore now that float.h does not depend on enquire. |
| install-float-h-cross: installdirs |
| # if [ -f enquire ] ; then true; else false; fi |
| # Note: don't use -. We should fail right away if enquire was not made. |
| ./enquire -f > $(tmpdir)/float.h |
| -rm -f $(libsubdir)/include/float.h |
| $(INSTALL_DATA) $(tmpdir)/float.h $(libsubdir)/include/float.h |
| -rm -f $(tmpdir)/float.h |
| chmod a-x $(libsubdir)/include/float.h |
| |
| # Create the installation directories. |
| installdirs: |
| -if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; chmod a+rx $(prefix) ; fi |
| -if [ -d $(exec_prefix) ] ; then true ; else mkdir $(exec_prefix) ; chmod a+rx $(exec_prefix) ; fi |
| -if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; chmod a+rx $(libdir) ; fi |
| -if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib ; chmod a+rx $(libdir)/gcc-lib ; fi |
| # This dir isn't currently searched by cpp. |
| # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi |
| -fdir= ; for dir in `echo $(libsubdir) | tr '/' ' '`; do \ |
| fdir=$${fdir}/$${dir}; \ |
| if [ -d $${fdir} ] ; then true ; else mkdir $${fdir}; chmod a+rx $${fdir}; fi ; \ |
| done |
| -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; chmod a+rx $(bindir) ; fi |
| -if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; chmod a+rx $(includedir) ; fi |
| -if [ -d $(gcc_tooldir) ] ; then true ; else mkdir $(gcc_tooldir) ; chmod a+rx $(gcc_tooldir) ; fi |
| -if [ -d $(assertdir) ] ; then true ; else mkdir $(assertdir) ; chmod a+rx $(assertdir) ; fi |
| -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; chmod a+rx $(infodir) ; fi |
| # We don't use mkdir -p to create the parents of man1dir, |
| # because some systems don't support it. |
| # Instead, we use this technique to create the immediate parent of man1dir. |
| -parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \ |
| if [ -d $$parent ] ; then true ; else mkdir $$parent ; chmod a+rx $$parent ; fi |
| -if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; chmod a+rx $(man1dir) ; fi |
| |
| # Install the compiler executables built during cross compilation. |
| install-common: native installdirs $(EXTRA_PARTS) lang.install-common |
| for file in $(COMPILERS); do \ |
| if [ -f $$file ] ; then \ |
| rm -f $(libsubdir)/$$file; \ |
| $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \ |
| else true; \ |
| fi; \ |
| done |
| for file in $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \ |
| if [ x"$$file" != x.. ]; then \ |
| rm -f $(libsubdir)/$$file; \ |
| $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \ |
| else true; fi; \ |
| done |
| for file in $(EXTRA_PARTS) ..; do \ |
| if [ x"$$file" != x.. ]; then \ |
| rm -f $(libsubdir)/$$file; \ |
| $(INSTALL_DATA) $$file $(libsubdir)/$$file; \ |
| chmod a-x $(libsubdir)/$$file; \ |
| else true; fi; \ |
| done |
| # Don't mess with specs if it doesn't exist yet. |
| -if [ -f specs ] ; then \ |
| rm -f $(libsubdir)/specs; \ |
| $(INSTALL_DATA) specs $(libsubdir)/specs; \ |
| chmod a-x $(libsubdir)/specs; \ |
| fi |
| # Install protoize if it was compiled. |
| -if [ -f protoize$(exeext) ]; \ |
| then \ |
| if [ -f gcc-cross$(exeext) ] ; then \ |
| rm -f $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \ |
| rm -f $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \ |
| else \ |
| rm -f $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \ |
| rm -f $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \ |
| fi ; \ |
| rm -f $(libsubdir)/SYSCALLS.c.X; \ |
| $(INSTALL_DATA) SYSCALLS.c.X $(libsubdir)/SYSCALLS.c.X; \ |
| chmod a-x $(libsubdir)/SYSCALLS.c.X; \ |
| fi |
| -rm -f $(libsubdir)/cpp$(exeext) |
| $(INSTALL_PROGRAM) cpp$(exeext) $(libsubdir)/cpp$(exeext) |
| # Install gcov if it was compiled. |
| -if [ -f gcov$(exeext) ]; \ |
| then \ |
| rm -f $(bindir)/gcov$(exeext); \ |
| $(INSTALL_PROGRAM) gcov$(exeext) $(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \ |
| fi |
| |
| # Install the driver program as $(target_alias)-gcc |
| # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc. |
| install-driver: xgcc$(exeext) |
| -if [ -f gcc-cross$(exeext) ] ; then \ |
| rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \ |
| if [ -d $(gcc_tooldir)/bin/. ] ; then \ |
| rm -f $(gcc_tooldir)/bin/gcc$(exeext); \ |
| $(INSTALL_PROGRAM) gcc-cross$(exeext) $(gcc_tooldir)/bin/gcc$(exeext); \ |
| else true; fi; \ |
| else \ |
| rm -f $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) xgcc$(exeext) $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \ |
| rm -f $(bindir)/$(target_alias)-gcc-1$(exeext); \ |
| $(LN) $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target_alias)-gcc-1$(exeext); \ |
| mv $(bindir)/$(target_alias)-gcc-1$(exeext) $(bindir)/$(target_alias)-gcc$(exeext); \ |
| fi |
| |
| # Install the info files. |
| # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir |
| # to do the install. |
| install-info: doc installdirs lang.install-info |
| -rm -f $(infodir)/cpp.info* $(infodir)/gcc.info* |
| for f in cpp.info* gcc.info*; do \ |
| $(INSTALL_DATA) $$f $(infodir)/$$f; \ |
| done |
| -if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ |
| if [ -f $(infodir)/dir ] ; then \ |
| for f in cpp.info gcc.info; do \ |
| install-info --dir-file=$(infodir)/dir $(infodir)/$$f; \ |
| done; \ |
| else true; fi; \ |
| else true; fi; |
| -chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info* |
| |
| # Install the man pages. |
| install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cccp.1 lang.install-man |
| -if [ -f gcc-cross$(exeext) ] ; then \ |
| rm -f $(man1dir)/$(GCC_CROSS_NAME)$(manext); \ |
| $(INSTALL_DATA) $(srcdir)/gcc.1 $(man1dir)/$(GCC_CROSS_NAME)$(manext); \ |
| chmod a-x $(man1dir)/$(GCC_CROSS_NAME)$(manext); \ |
| else \ |
| rm -f $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \ |
| $(INSTALL_DATA) $(srcdir)/gcc.1 $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \ |
| chmod a-x $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \ |
| fi |
| -rm -f $(man1dir)/cccp$(manext) |
| -$(INSTALL_DATA) $(srcdir)/cccp.1 $(man1dir)/cccp$(manext) |
| -chmod a-x $(man1dir)/cccp$(manext) |
| |
| # Install the library. |
| install-libgcc: libgcc.a installdirs |
| -if [ -f libgcc.a ] ; then \ |
| rm -f $(libsubdir)/libgcc.a; \ |
| $(INSTALL_DATA) libgcc.a $(libsubdir)/libgcc.a; \ |
| if $(RANLIB_TEST_FOR_TARGET) ; then \ |
| (cd $(libsubdir); $(RANLIB_FOR_TARGET) libgcc.a); else true; fi; \ |
| chmod a-x $(libsubdir)/libgcc.a; \ |
| else true; fi |
| |
| # Install multiple versions of libgcc.a. |
| install-multilib: stmp-multilib installdirs |
| for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \ |
| dir=`echo $$i | sed -e 's/;.*$$//'`; \ |
| if [ -d $(libsubdir)/$${dir} ]; then true; else mkdir $(libsubdir)/$${dir}; fi; \ |
| for f in libgcc.a $(EXTRA_MULTILIB_PARTS); do \ |
| rm -f $(libsubdir)/$${dir}/$${f}; \ |
| $(INSTALL_DATA) $${dir}/$${f} $(libsubdir)/$${dir}/$${f}; \ |
| done; \ |
| if $(RANLIB_TEST_FOR_TARGET); then \ |
| (cd $(libsubdir)/$${dir}; $(RANLIB_FOR_TARGET) libgcc.a); \ |
| else true; fi; \ |
| chmod a-x $(libsubdir)/$${dir}/libgcc.a; \ |
| done |
| |
| # Install all the header files built in the include subdirectory. |
| install-headers: install-include-dir $(INSTALL_HEADERS_DIR) $(INSTALL_ASSERT_H) |
| # Fix symlinks to absolute paths in the installed include directory to |
| # point to the installed directory, not the build directory. |
| # Don't need to use LN_S here since we really do need ln -s and no substitutes. |
| -files=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \ |
| if [ $$? -eq 0 ]; then \ |
| dir=`cd include; pwd`; \ |
| for i in $$files; do \ |
| dest=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \ |
| if expr "$$dest" : "$$dir.*" > /dev/null; then \ |
| rm -f $(libsubdir)/include/$$i; \ |
| ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir)/include/$$i; \ |
| fi; \ |
| done; \ |
| fi |
| |
| # Create or recreate the gcc private include file directory. |
| install-include-dir: installdirs |
| -rm -rf $(libsubdir)/include |
| mkdir $(libsubdir)/include |
| -chmod a+rx $(libsubdir)/include |
| |
| # Install the include directory using tar. |
| install-headers-tar: stmp-headers $(STMP_FIXPROTO) install-include-dir |
| # We use `pwd`/include instead of just include to problems with CDPATH |
| # Unless a full pathname is provided, some shells would print the new CWD, |
| # found in CDPATH, corrupting the output. We could just redirect the |
| # output of `cd', but some shells lose on redirection within `()'s |
| (cd `pwd`/include ; \ |
| tar -cf - .; exit 0) | (cd $(libsubdir)/include; tar $(TAROUTOPTS) - ) |
| # /bin/sh on some systems returns the status of the first tar, |
| # and that can lose with GNU tar which always writes a full block. |
| # So use `exit 0' to ignore its exit status. |
| |
| # Install the include directory using cpio. |
| install-headers-cpio: stmp-headers $(STMP_FIXPROTO) install-include-dir |
| # See discussion about the use of `pwd` above |
| cd `pwd`/include ; \ |
| find . -print | cpio -pdum $(libsubdir)/include |
| |
| # Put assert.h where it won't override GNU libc's assert.h. |
| # It goes in a dir that is searched after GNU libc's headers; |
| # thus, the following conditionals are no longer needed. |
| # But it's not worth deleting them now. |
| ## Don't replace the assert.h already there if it is not from GCC. |
| ## This code would be simpler if it tested for -f ... && ! grep ... |
| ## but supposedly the ! operator is missing in sh on some systems. |
| install-assert-h: assert.h installdirs |
| if [ -f $(assertdir)/assert.h ]; \ |
| then \ |
| if grep "__eprintf" $(assertdir)/assert.h >/dev/null; \ |
| then \ |
| rm -f $(assertdir)/assert.h; \ |
| $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \ |
| chmod a-x $(assertdir)/assert.h; \ |
| else true; \ |
| fi; \ |
| else \ |
| rm -f $(assertdir)/assert.h; \ |
| $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \ |
| chmod a-x $(assertdir)/assert.h; \ |
| fi |
| |
| # Use this target to install the program `collect2' under the name `collect2'. |
| install-collect2: collect2 installdirs |
| $(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/collect2$(exeext) |
| # Install the driver program as $(libsubdir)/gcc for collect2. |
| $(INSTALL_PROGRAM) xgcc$(exeext) $(libsubdir)/gcc$(exeext) |
| |
| # Cancel installation by deleting the installed files. |
| uninstall: intl.uninstall lang.uninstall $(UNINSTALL_CPP) |
| -rm -rf $(libsubdir) |
| -rm -rf $(bindir)/$(GCC_INSTALL_NAME)$(exeext) |
| -rm -rf $(bindir)/$(GCC_CROSS_NAME)$(exeext) |
| -rm -rf $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext) |
| -rm -rf $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext) |
| -rm -rf $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext) |
| -rm -rf $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext) |
| -rm -rf $(bindir)/$(GCOV_INSTALL_NAME)$(exeext) |
| -rm -rf $(man1dir)/$(GCC_INSTALL_NAME)$(manext) |
| -rm -rf $(man1dir)/$(GCC_CROSS_NAME)$(manext) |
| -rm -rf $(man1dir)/cccp$(manext) |
| -rm -rf $(man1dir)/protoize$(manext) |
| -rm -rf $(man1dir)/unprotoize$(manext) |
| -rm -f $(infodir)/cpp.info* $(infodir)/gcc.info* |
| # |
| # These targets are for the dejagnu testsuites. The file site.exp |
| # contains global variables that all the testsuites will use. |
| |
| # Set to $(target_alias)/ for cross. |
| target_subdir = @target_subdir@ |
| |
| site.exp: ./config.status Makefile |
| @echo "Making a new config file..." |
| -@rm -f ./tmp? |
| @touch site.exp |
| -@mv site.exp site.bak |
| @echo "## these variables are automatically generated by make ##" > ./tmp0 |
| @echo "# Do not edit here. If you wish to override these values" >> ./tmp0 |
| @echo "# add them to the last section" >> ./tmp0 |
| @echo "set rootme \"`pwd`\"" >> ./tmp0 |
| @echo "set srcdir \"`cd ${srcdir}; pwd`\"" >> ./tmp0 |
| @echo "set host_triplet $(host_canonical)" >> ./tmp0 |
| @echo "set build_triplet $(build_canonical)" >> ./tmp0 |
| @echo "set target_triplet $(target)" >> ./tmp0 |
| @echo "set target_alias $(target_alias)" >> ./tmp0 |
| # CFLAGS is set even though it's empty to show we reserve the right to set it. |
| @echo "set CFLAGS \"\"" >> ./tmp0 |
| @echo "set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> ./tmp0 |
| # If newlib has been configured, we need to pass -B to gcc so it can find |
| # newlib's crt0.o if it exists. This will cause a "path prefix not used" |
| # message if it doesn't, but the testsuite is supposed to ignore the message - |
| # it's too difficult to tell when to and when not to pass -B (not all targets |
| # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that |
| # seems like too selective a test. |
| # ??? Another way to solve this might be to rely on linker scripts. Then |
| # theoretically the -B won't be needed. |
| # We also need to pass -L ../ld so that the linker can find ldscripts. |
| @if [ -d $(objdir)/../$(target_subdir)newlib ] ; then \ |
| echo "set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> ./tmp0; \ |
| echo "set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> ./tmp0; \ |
| echo "append CFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \ |
| echo "append CXXFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \ |
| echo "append LDFLAGS \" \$$newlib_ldflags\"" >> ./tmp0; \ |
| else true; \ |
| fi |
| @if [ -d $(objdir)/../ld ] ; then \ |
| echo "append LDFLAGS \" -L$(objdir)/../ld\"" >> ./tmp0; \ |
| else true; \ |
| fi |
| echo "set tmpdir $(objdir)/testsuite" >> ./tmp0 |
| @echo "set srcdir \"\$${srcdir}/testsuite\"" >> ./tmp0 |
| @echo "## All variables above are generated by configure. Do Not Edit ##" >> ./tmp0 |
| @cat ./tmp0 > site.exp |
| @cat site.bak | sed \ |
| -e '1,/^## All variables above are.*##/ d' >> site.exp |
| -@rm -f ./tmp? |
| |
| CHECK_TARGETS = check-gcc check-g++ check-g77 check-objc |
| |
| check: $(CHECK_TARGETS) |
| |
| testsuite/site.exp: site.exp |
| if [ -d testsuite ]; then \ |
| true; \ |
| else \ |
| mkdir testsuite; \ |
| fi |
| rm -rf testsuite/site.exp |
| cp site.exp testsuite/site.exp |
| |
| check-g++: testsuite/site.exp |
| -rootme=`pwd`; export rootme; \ |
| srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \ |
| cd testsuite; \ |
| EXPECT=${EXPECT} ; export EXPECT ; \ |
| if [ -f $${rootme}/../expect/expect ] ; then \ |
| TCL_LIBRARY=`cd ${srcdir}/../tcl/library ; pwd` ; \ |
| export TCL_LIBRARY ; fi ; \ |
| $(RUNTEST) --tool g++ $(RUNTESTFLAGS) |
| |
| check-gcc: testsuite/site.exp |
| -rootme=`pwd`; export rootme; \ |
| srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \ |
| cd testsuite; \ |
| EXPECT=${EXPECT} ; export EXPECT ; \ |
| if [ -f $${rootme}/../expect/expect ] ; then \ |
| TCL_LIBRARY=`cd ${srcdir}/../tcl/library ; pwd` ; \ |
| export TCL_LIBRARY ; fi ; \ |
| $(RUNTEST) --tool gcc $(RUNTESTFLAGS) |
| |
| check-g77: testsuite/site.exp |
| -rootme=`pwd`; export rootme; \ |
| srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \ |
| cd testsuite; \ |
| EXPECT=${EXPECT} ; export EXPECT ; \ |
| if [ -f $${rootme}/../expect/expect ] ; then \ |
| TCL_LIBRARY=`cd ${srcdir}/../tcl/library ; pwd` ; \ |
| export TCL_LIBRARY ; fi ; \ |
| $(RUNTEST) --tool g77 $(RUNTESTFLAGS) |
| |
| check-objc: testsuite/site.exp |
| -rootme=`pwd`; export rootme; \ |
| srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \ |
| cd testsuite; \ |
| EXPECT=${EXPECT} ; export EXPECT ; \ |
| if [ -f $${rootme}/../expect/expect ] ; then \ |
| TCL_LIBRARY=`cd ${srcdir}/../tcl/library ; pwd` ; \ |
| export TCL_LIBRARY ; fi ; \ |
| $(RUNTEST) --tool objc $(RUNTESTFLAGS) |
| |
| # These exist for maintenance purposes. |
| |
| # Update the tags table. |
| TAGS: force |
| cd $(srcdir); \ |
| mkdir tmp-tags; \ |
| mv -f c-parse.[ch] cexp.c =*.[chy] tmp-tags; \ |
| etags *.y *.h *.c; \ |
| mv tmp-tags/* .; \ |
| rmdir tmp-tags |
| |
| # Create the distribution tar.gz file. |
| dist: tmp-gcc.xtar |
| gzip --best < tmp-gcc.xtar > tmp-gcc.xtar.gz |
| mv tmp-gcc.xtar.gz gcc-$(version).tar.gz |
| |
| tmp-gcc.xtar: distdir |
| # Make the distribution. |
| tar -chf tmp-gcc.xtar gcc-$(version) |
| |
| distdir-cvs: force |
| if [ -d $(srcdir)/CVS ]; then cd $(srcdir) && cvs -r update; fi |
| |
| # This target exists to do the initial work before the language specific |
| # stuff gets done. |
| distdir-start: doc $(srcdir)/INSTALL $(srcdir)/c-parse.y $(srcdir)/c-gperf.h \ |
| $(srcdir)/c-parse.c $(srcdir)/cexp.c $(srcdir)/config.in \ |
| $(srcdir)/version.c TAGS |
| @case '$(USE_NLS)' in \ |
| yes) ;; \ |
| *) echo "configure with --enable-nls before making a distribution"; \ |
| exit 1;; \ |
| esac |
| @if grep -s "for version ${mainversion}" gcc.texi > /dev/null; \ |
| then true; \ |
| else echo "You must update the version number in \`gcc.texi'"; sleep 10;\ |
| fi |
| # Update the version number in README |
| $(AWK) '$$1 " " $$2 " " $$3 == "This directory contains" \ |
| { $$6 = version; print $$0 } \ |
| $$1 " " $$2 " " $$3 != "This directory contains"' \ |
| version=$(version) $(srcdir)/README > tmp.README |
| mv tmp.README README |
| -rm -rf gcc-$(version) tmp |
| # Put all the files in a temporary subdirectory |
| # which has the name that we want to have in the tar file. |
| mkdir tmp |
| mkdir tmp/config |
| mkdir tmp/ginclude |
| mkdir tmp/objc |
| mkdir tmp/intl |
| mkdir tmp/po |
| for file in `(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \ |
| test -f $(srcdir)/$$file && $(LN_S) $(srcdir)/$$file tmp; \ |
| done |
| if test "$(srcdir)" != "." ; then \ |
| for file in c-parse.c cexp.c ; do \ |
| test -f ./$$file && $(LN_S) ../$$file tmp; \ |
| done; \ |
| fi |
| for file in `(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \ |
| if test -d $(srcdir)/config/$$file \ |
| && test "$$file" != RCS && test "$$file" != CVS; then \ |
| mkdir tmp/config/$$file; \ |
| for subfile in `(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \ |
| $(LN_S) $(srcdir)/config/$$file/$$subfile tmp/config/$$file; \ |
| done; \ |
| else \ |
| $(LN_S) $(srcdir)/config/$$file tmp/config; \ |
| fi; \ |
| done |
| for file in `(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \ |
| $(LN_S) $(srcdir)/ginclude/$$file tmp/ginclude; \ |
| done |
| for file in `(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \ |
| $(LN_S) $(srcdir)/objc/$$file tmp/objc; \ |
| done |
| $(LN_S) .gdbinit tmp |
| |
| # Finish making `distdir', after the languages have done their thing. |
| distdir-finish: |
| mv tmp gcc-$(version) |
| # Get rid of everything we don't want in the distribution. We'd want |
| # this to use Makefile.in, but it doesn't have the `lang.foo' targets |
| # expanded. |
| cd gcc-$(version); make extraclean distdir-check VERSION_DEP= |
| |
| distdir-check: |
| ($(AWK) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' | sort) \ |
| < po/POTFILES.in > tmp.POTFILES |
| ls [A-Za-z]*.[ch] [a-z]*/[A-Za-z]*.[ch] \ |
| [a-z]*/[a-z]*/[A-Za-z]*.[ch] | sort > tmp.src |
| diff tmp.POTFILES tmp.src || { \ |
| echo "po/POTFILES.in and sources do not match -- please fix"; \ |
| exit 1; \ |
| } |
| rm -f tmp.* |
| |
| distdir: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \ |
| lang.distdir distdir-finish |
| |
| # make diff oldversion=M.N |
| # creates a diff file between an older distribution and this one. |
| # The -P option assumes this is GNU diff. |
| diff: |
| diff -rc2P -x c-parse.y -x c-parse.c -x c-parse.h -x c-gperf.h \ |
| -x cexp.c -x -x TAGS -x INSTALL \ |
| -x configure -x config.in \ |
| -x "gcc.??" -x "gcc.??s" -x gcc.aux -x "gcc.info*" \ |
| -x "cpp.??" -x "cpp.??s" -x cpp.aux -x "cpp.info*" \ |
| $(LANG_DIFF_EXCLUDES) \ |
| gcc-$(oldversion) gcc-$(version) > gcc-$(oldversion)-$(version).diff |
| |
| bootstrap bootstrap-lean: force |
| # Only build the C compiler for stage1, because that is the only one that |
| # we can guarantee will build with the native compiler, and also it is the |
| # only thing useful for building stage2. |
| $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)" |
| $(MAKE) stage1 |
| # This used to define ALLOCA as empty, but that would lead to bad results |
| # for a subsequent `make install' since that would not have ALLOCA empty. |
| # To prevent `make install' from compiling alloca.o and then relinking cc1 |
| # because alloca.o is newer, we permit these recursive makes to compile |
| # alloca.o. Then cc1 is newer, so it won't have to be relinked. |
| $(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)" |
| $(MAKE) stage2 |
| -if test $@ = bootstrap-lean; then rm -rf stage1; else true; fi |
| $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)" |
| |
| bootstrap2 bootstrap2-lean: force |
| $(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)" |
| $(MAKE) stage2 |
| -if test $@ = bootstrap2-lean; then rm -rf stage1; else true; fi |
| $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)" |
| |
| bootstrap3 bootstrap3-lean: force |
| $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)" |
| |
| bootstrap4 bootstrap4-lean: force |
| $(MAKE) CC="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage3/ LANGUAGES="$(LANGUAGES)" |
| |
| # Compare the object files in the current directory with those in the |
| # stage2 directory. |
| |
| # ./ avoids bug in some versions of tail. |
| compare compare3 compare4 compare-lean compare3-lean compare4-lean: force |
| -rm -f .bad_compare |
| case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \ |
| for file in *$(objext); do \ |
| tail +16c ./$$file > tmp-foo1; \ |
| tail +16c stage$$stage/$$file > tmp-foo2 \ |
| && (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \ |
| done |
| case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \ |
| for dir in tmp-foo intl $(SUBDIRS); do \ |
| if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \ |
| for file in $$dir/*$(objext); do \ |
| tail +16c ./$$file > tmp-foo1; \ |
| tail +16c stage$$stage/$$file > tmp-foo2 \ |
| && (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \ |
| done; \ |
| else true; fi; \ |
| done |
| -rm -f tmp-foo* |
| case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \ |
| if [ -f .bad_compare ]; then \ |
| echo "Bootstrap comparison failure!"; \ |
| cat .bad_compare; \ |
| exit 1; \ |
| else \ |
| case "$@" in \ |
| *-lean ) rm -rf stage$$stage ;; \ |
| *) ;; \ |
| esac; true; \ |
| fi |
| |
| # Compare the object files in the current directory with those in the |
| # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid |
| # running tail and the overhead of twice copying each object file. |
| |
| gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean: force |
| -rm -f .bad_compare |
| case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \ |
| for file in *$(objext); do \ |
| (cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \ |
| done |
| case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \ |
| for dir in tmp-foo intl $(SUBDIRS); do \ |
| if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \ |
| for file in $$dir/*$(objext); do \ |
| (cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \ |
| done; \ |
| else true; fi; \ |
| done |
| case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \ |
| if [ -f .bad_compare ]; then \ |
| echo "Bootstrap comparison failure!"; \ |
| cat .bad_compare; \ |
| exit 1; \ |
| else \ |
| case "$@" in \ |
| *-lean ) rm -rf stage$$stage ;; \ |
| esac; true; \ |
| fi |
| |
| # Copy the object files from a particular stage into a subdirectory. |
| stage1-start: |
| -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi |
| -for dir in intl $(SUBDIRS) ; \ |
| do \ |
| if [ -d stage1/$$dir ] ; then true ; else mkdir stage1/$$dir ; fi ; \ |
| done |
| -mv $(STAGESTUFF) stage1 |
| -mv intl/*$(objext) stage1/intl |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage1 ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage1 ; else true ; fi |
| -if [ -f collect-ld$(exeext) ] ; then $(LN_S) ../collect-ld$(exeext) stage1 ; else true ; fi |
| -rm -f stage1/libgcc.a |
| -cp libgcc.a stage1 |
| -if $(RANLIB_TEST_FOR_TARGET) ; then \ |
| $(RANLIB_FOR_TARGET) stage1/libgcc.a; \ |
| else true; fi |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stage1/$${f} . ; \ |
| else true; \ |
| fi; done |
| stage1: force stage1-start lang.stage1 |
| |
| stage2-start: |
| -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi |
| -for dir in intl $(SUBDIRS) ; \ |
| do \ |
| if [ -d stage2/$$dir ] ; then true ; else mkdir stage2/$$dir ; fi ; \ |
| done |
| -mv $(STAGESTUFF) stage2 |
| -mv intl/*$(objext) stage2/intl |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage2 ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage2 ; else true ; fi |
| -if [ -f collect-ld ] ; then $(LN_S) ../collect-ld$(exeext) stage2 ; else true ; fi |
| -rm -f stage2/libgcc.a |
| -cp libgcc.a stage2 |
| -if $(RANLIB_TEST_FOR_TARGET) ; then \ |
| $(RANLIB_FOR_TARGET) stage2/libgcc.a; \ |
| else true; fi |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stage2/$${f} . ; \ |
| else true; \ |
| fi; done |
| stage2: force stage2-start lang.stage2 |
| |
| stage3-start: |
| -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi |
| -for dir in intl $(SUBDIRS) ; \ |
| do \ |
| if [ -d stage3/$$dir ] ; then true ; else mkdir stage3/$$dir ; fi ; \ |
| done |
| -mv $(STAGESTUFF) stage3 |
| -mv intl/*$(objext) stage3/intl |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage3 ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage3 ; else true ; fi |
| -if [ -f collect-ld$(exeext) ] ; then $(LN_S) ../collect-ld$(exeext) stage3 ; else true ; fi |
| -rm -f stage3/libgcc.a |
| -cp libgcc.a stage3 |
| -if $(RANLIB_TEST_FOR_TARGET) ; then \ |
| $(RANLIB_FOR_TARGET) stage3/libgcc.a; \ |
| else true; fi |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stage3/$${f} . ; \ |
| else true; \ |
| fi; done |
| stage3: force stage3-start lang.stage3 |
| |
| stage4-start: |
| -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi |
| -for dir in intl $(SUBDIRS) ; \ |
| do \ |
| if [ -d stage4/$$dir ] ; then true ; else mkdir stage4/$$dir ; fi ; \ |
| done |
| -mv $(STAGESTUFF) stage4 |
| -mv intl/*$(objext) stage4/intl |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage4 ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage4 ; else true ; fi |
| -if [ -f collect-ld$(exeext) ] ; then $(LN_S) ../collect-ld$(exeext) stage4 ; else true ; fi |
| -rm -f stage4/libgcc.a |
| -cp libgcc.a stage4 |
| -if $(RANLIB_TEST_FOR_TARGET) ; then \ |
| $(RANLIB_FOR_TARGET) stage4/libgcc.a; \ |
| else true; fi |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stage4/$${f} . ; \ |
| else true; \ |
| fi; done |
| stage4: force stage4-start lang.stage4 |
| |
| # Copy just the executable files from a particular stage into a subdirectory, |
| # and delete the object files. Use this if you're just verifying a version |
| # that is pretty sure to work, and you are short of disk space. |
| risky-stage1: stage1 |
| -make clean |
| |
| risky-stage2: stage2 |
| -make clean |
| |
| risky-stage3: stage3 |
| -make clean |
| |
| risky-stage4: stage4 |
| -make clean |
| |
| #In GNU Make, ignore whether `stage*' exists. |
| .PHONY: stage1 stage2 stage3 stage4 clean maintainer-clean TAGS bootstrap |
| .PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4 |
| |
| force: |
| |
| # --- |
| # The enquire rules are still useful for building new float-anything.h. |
| # Special flags for compiling enquire. |
| # We disable optimization to make floating point more reliable. |
| ENQUIRE_CFLAGS = -DNO_MEM -DNO_LONG_DOUBLE_IO -O0 |
| ENQUIRE_LDFLAGS = $(LDFLAGS) |
| |
| # Enquire target (This is a variable so that a target can choose not to |
| # build it.) |
| ENQUIRE = enquire |
| |
| # Test to see whether <float.h> exists in the system header files, |
| # and is not derived from GCC. |
| FLOAT_H_TEST = \ |
| [ -f $(SYSTEM_HEADER_DIR)/float.h ] && \ |
| if grep 'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR)/float.h >/dev/null; \ |
| then false; \ |
| else :; fi |
| # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST |
| # to ensure, we're emitting a full blown <float.h> ourselves. |
| FLOAT_H_TEST = false |
| |
| # Used to compile enquire with standard cc, but have forgotten why. |
| # Let's try with GCC. |
| enquire: enquire.o $(GCC_PARTS) |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@ |
| enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs |
| if $(FLOAT_H_TEST); then \ |
| rm -f include/float.h; \ |
| SYS_FLOAT_H_WRAP=1; \ |
| else :; \ |
| SYS_FLOAT_H_WRAP=0; \ |
| fi; \ |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) \ |
| -DSYS_FLOAT_H_WRAP=$$SYS_FLOAT_H_WRAP \ |
| -I. -c $(srcdir)/enquire.c |
| |
| # Create float.h source for the native machine. |
| # Make it empty if we can use the system float.h without changes. |
| float.h-nat: enquire |
| -./enquire -f > tmp-float.h |
| grep '#define [^_]' tmp-float.h >/dev/null || true > tmp-float.h |
| mv tmp-float.h float.h-nat |
| |
| # Create a dummy float.h source for a cross-compiler. |
| # ??? This isn't used anymore. Should we create config/float-unkn.h |
| # and make that the default float_format in configure? |
| float.h-cross: |
| echo "#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross |
| echo "#error float.h values not known for cross-compiler" >> t-float.h-cross |
| echo "#endif" >> t-float.h-cross |
| mv t-float.h-cross float.h-cross |
| |
