gcc/ch/Makefile.in - gcc - Git at Google

 # Makefile for GNU CHILL compiler.
 #   Copyright (C) 1987, 88, 90-94, 1998, 1999 Free Software Foundation, Inc.

 #This file is part of GNU CC.

 #GNU CC is free software; you can redistribute it and/or modify
 #it under the terms of the GNU General Public License as published by
 #the Free Software Foundation; either version 2, or (at your option)
 #any later version.

 #GNU CC is distributed in the hope that it will be useful,
 #but WITHOUT ANY WARRANTY; without even the implied warranty of
 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 #GNU General Public License for more details.

 #You should have received a copy of the GNU General Public License
 #along with GNU CC; see the file COPYING.  If not, write to
 #the Free Software Foundation, 59 Temple Place - Suite 330,
 #Boston, MA 02111-1307, USA.  */

 # The makefile built from this file lives in the language subdirectory.
 # It's purpose is to provide support for:
 #
 # 1) recursion where necessary, and only then (building .o's), and
 # 2) building and debugging cc1 from the language subdirectory, and
 # 3) nothing else.
 #
 # The parent makefile handles all other chores, with help from the
 # language makefile fragment, of course.
 #
 # The targets for external use are:
 # all, TAGS, ???mostlyclean, ???clean.

 # Suppress smart makes who think they know how to automake Yacc files
 .y.c:


 # Variables that exist for you to override.
 # See below for how to change them for certain systems.

 ALLOCA =

 # Various ways of specifying flags for compilations:
 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
 # BOOT_CFLAGS is the value of CFLAGS to pass
 # to the stage2 and stage3 compilations
 # XCFLAGS is used for most compilations but not when using the GCC just built.
 XCFLAGS =
 CFLAGS = -g
 BOOT_CFLAGS = -O $(CFLAGS)
 # These exists to be overridden by the x-* and t-* files, respectively.
 X_CFLAGS =
 T_CFLAGS =

 X_CPPFLAGS =
 T_CPPFLAGS =

 CC = cc
 AR = ar
 AR_FLAGS = rc
 SHELL = /bin/sh
 MAKEINFO = makeinfo
 TEXI2DVI = texi2dvi

 # Define this as & to perform parallel make on a Sequent.
 # Note that this has some bugs, and it seems currently necessary
 # to compile all the gen* files first by hand to avoid erroneous results.
 P =

 # This is used in the definition of SUBDIR_USE_ALLOCA.
 # ??? Perhaps it would be better if it just looked for *gcc*.
 OLDCC = cc

 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
 # It omits XCFLAGS, and specifies -B./.
 # It also specifies -B$(tooldir)/ to find as and ld for a cross compiler.
 GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS)

 # Tools to use when building a cross-compiler.
 # These are used because `configure' appends `cross-make'
 # to the makefile when making a cross-compiler.

 # CYGNUS LOCAL: we don't use cross-make.  Instead we use the tools
 # from the build tree, if they are available.
 # program_transform_name and objdir are set by configure.in.
 program_transform_name =
 objdir = .

 target= ... `configure' substitutes actual target name here.
 xmake_file= ... `configure' substitutes actual x- file name here.
 tmake_file= ... `configure' substitutes actual t- file name here.
 #version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c`
 #mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`

 # Directory where sources are, from where we are.
 srcdir = .

 # CYGNUS LOCAL
 # Directory where texinfo.tex lives
 texidir = $(srcdir)/../../texinfo

 # Additional system libraries to link with.
 CLIB=

 # Change this to a null string if obstacks are installed in the
 # system library.
 OBSTACK=obstack.o

 # Choose the real default target.
 ALL=all

 # End of variables for you to override.

 # Definition of `all' is here so that new rules inserted by sed
 # do not specify the default target.
 all: all.indirect

 # This tells GNU Make version 3 not to put all variables in the environment.
 .NOEXPORT:

 # sed inserts variable overrides after the following line.
 ####target overrides
 ####host overrides
 ####cross overrides
 ####build overrides
 ####site overrides
 #
 # Now figure out from those variables how to compile and link.

 all.indirect: Makefile ../chill ../cc1chill$(exeext)

 # IN_GCC tells obstack.h that we are using gcc's <stddef.h> file.
 INTERNAL_CFLAGS = $(CROSS) -DIN_GCC

 # This is the variable actually used when we compile.
 ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS)

 # Likewise.
 ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)

 # CYGNUS LOCAL: SUBDIR_USE_ALLOCA is different from FSF.
 # Even if ALLOCA is set, don't use it if compiling with GCC.

 SUBDIR_OBSTACK = `if [ x$(OBSTACK) != x ]; then echo ../$(OBSTACK); else true; fi`
 #SUBDIR_USE_ALLOCA = `case "${CC}" in "${OLDCC}") if [ x$(ALLOCA) != x ]; then echo ../$(ALLOCA); else true; fi ;; esac`
 SUBDIR_USE_ALLOCA = `if [ x$(ALLOCA) != x ]; then echo ../$(ALLOCA); else true; fi`
 SUBDIR_MALLOC = `if [ x$(MALLOC) != x ]; then echo ../$(MALLOC); else true; fi`

 # How to link with both our special library facilities
 # and the system's installed libraries.
 LIBS = $(SUBDIR_OBSTACK) $(SUBDIR_USE_ALLOCA) $(SUBDIR_MALLOC) $(CLIB)

 # Specify the directories to be searched for header files.
 # Both . and srcdir are used, in that order,
 # so that tm.h and config.h will be found in the compilation
 # subdirectory rather than in the source directory.
 INCLUDES = -I. -I.. -I$(srcdir) -I$(srcdir)/.. -I$(srcdir)/../config -I$(srcdir)/../../include

 # Flags to pass to recursive makes.
 # ??? $(CC) may need some work to handle stage[123].
 # ??? The choices here will need some experimenting with.
 FLAGS_TO_PASS = \
 	"AR_FLAGS=$(AR_FLAGS)" \
 	"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
 	"BISON=$(BISON)" \
 	"BISONFLAGS=$(BISONFLAGS)" \
 	"CC=$(CC)" \
 	"CFLAGS=$(CFLAGS)" \
 	"GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
 	"LDFLAGS=$(LDFLAGS)" \
 	"LEX=$(LEX)" \
 	"LEXFLAGS=$(LEXFLAGS)" \
 	"MAKEINFO=$(MAKEINFO)" \
 	"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
 	"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
 	"RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
 	"SHELL=$(SHELL)" \
 	"exec_prefix=$(exec_prefix)" \
 	"prefix=$(prefix)" \
 	"tooldir=$(tooldir)" \
 	"bindir=$(bindir)" \
 	"libsubdir=$(libsubdir)"

 # Always use -I$(srcdir)/config when compiling.
 .c.o:
 	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<

 # This tells GNU make version 3 not to export all the variables
 # defined in this file into the environment.
 .NOEXPORT:
 #
 # Lists of files for various purposes.

 # Language-specific object files for CHILL

 #C_OBJS = ../cpplib.o ../cppexp.o ../cpphash.o ../cpperror.o

 CHILL_OBJS = parse.o actions.o except.o grant.o lang.o \
    tree.o lex.o decl.o typeck.o convert.o expr.o loop.o \
    tasking.o timing.o inout.o satisfy.o ch-version.o

 # Language-independent object files.
 OBJS = `cat ../stamp-objlist`
 OBJDEPS = ../stamp-objlist

 ../cc1chill$(exeext): $(P) $(CHILL_OBJS) $(OBJDEPS) $(LIBDEPS)
 	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(CHILL_OBJS) \
 	      $(OBJS) $(C_OBJS) $(LIBS)

 # This executable is used in the CHILL regression
 # test script
 utils/printf : $(srcdir)/utils/printf.c
 	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $<

 #
 # This is the top-level trigger for a CHILL regression test.
 # It also builds those tools needed for CHILL regression testing.
 #
 check: ../cc1chill$(exeext) utils/printf
 	cd ..; $(MAKE) $(FLAGS_TO_PASS) xgcc gcov cpp cc1 ld
 	$(srcdir)/regression.sh -d -p

 clean-tests:
 	cd testsuite/execute;  $(MAKE) clean
 	cd testsuite/execute/oe;  $(MAKE) clean
 	cd testsuite/compile/elektra;  $(MAKE) clean
 	cd testsuite/compile/votrics;  $(MAKE) clean
 	cd testsuite/compile;  $(MAKE) clean
 	cd testsuite/noncompile;  $(MAKE) clean
 	cd testsuite/examples;  $(MAKE) clean

 mostlyclean:
 	test -d testsuite && $(MAKE) clean-tests
 	rm -f *.o

 clean:  mostlyclean

 #
 Makefile: $(srcdir)/Makefile.in $(srcdir)/../configure
 	cd ..; $(SHELL) config.status

 native: config.status ../cc1chill$(exeext) ../chill
 #
 # Compiling object files from source files.

 # Note that dependencies on obstack.h are not written
 # because that file is not part of GCC.

 # CHILL language specific files.

 RTL_H = $(srcdir)/../rtl.h $(srcdir)/../rtl.def \
 	$(srcdir)/../machmode.h $(srcdir)/../machmode.def
 TREE_H = $(srcdir)/../tree.h $(srcdir)/../real.h $(srcdir)/../tree.def \
 	$(srcdir)/../machmode.h $(srcdir)/../machmode.def
 CHILL_TREE_H = $(TREE_H) ch-tree.h ch-tree.def

 # hash.h really depends on $(srcdir)/gperf.
 # But this would screw things for people that don't have gperf,
 # if gperf got touched, say.
 # Thus you have to remove hash.h to force it to be re-made.
 # Note: CHILL requires two sets of keywords, one all uppercase and
 # one all lowercase.  The hash table ends up with both sets in it.
 $(srcdir)/hash.h:
 	sed -e '1,/^%%/d' < $(srcdir)/gperf | \
 	  sed '/^[^a-zA-Z]/d' | tr "[a-z]" "[A-Z]" > gperf.tmp
 	gawk '{ printf ("s/^%s,/%s,/\n", $$1, toupper ($$1)) }' < gperf.tmp > sed.tmp
 	sed -f sed.tmp < gperf.tmp > gperf.tmp2
 	cat $(srcdir)/gperf gperf.tmp2 > gperf.tmp
 	gperf -L C -F ', 0, 0, 0' -D -E -S1 -p -j1 -i 1 -g -o -t -k'*' \
 	  gperf.tmp > $(srcdir)/hash.h
 	$(RM) gperf.tmp gperf.tmp2 sed.tmp

 actions.o : actions.c $(CONFIG_H) $(CHILL_TREE_H) actions.h $(RTL_H) \
 	lex.h $(srcdir)/../flags.h $(srcdir)/../../include/obstack.h \
 	$(srcdir)/../input.h $(srcdir)/../expr.h ../insn-codes.h \
 	$(srcdir)/../system.h $(srcdir)/../toplev.h
 convert.o : convert.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../flags.h \
 	$(srcdir)/../tree.h $(srcdir)/../system.h $(srcdir)/../toplev.h
 decl.o : decl.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../flags.h lex.h \
 	$(srcdir)/../system.h $(srcdir)/../toplev.h
 except.o : except.c $(CONFIG_H) $(srcdir)/../tree.h $(RTL_H) $(CHILL_TREE_H) \
 	$(srcdir)/../system.h $(srcdir)/../toplev.h
 expr.o : expr.c $(CONFIG_H) $(RTL_H) $(CHILL_TREE_H) $(srcdir)/../flags.h \
 	$(srcdir)/../expr.h ../insn-codes.h $(srcdir)/../tree.h lex.h \
 	$(srcdir)/../system.h $(srcdir)/../toplev.h
 grant.o: grant.c $(CONFIG_H) $(CHILL_TREE_H) $(RTL_H) $(srcdir)/../flags.h \
 	$(srcdir)/../input.h lex.h actions.h $(srcdir)/../system.h \
 	$(srcdir)/../toplev.h $(srcdir)/../output.h
 inout.o : inout.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../flags.h \
 	$(srcdir)/../input.h $(srcdir)/../system.h $(srcdir)/../toplev.h
 lang.o : lang.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../input.h lex.h \
 	$(srcdir)/../system.h $(srcdir)/../toplev.h
 lex.o : lex.c $(CONFIG_H) $(CHILL_TREE_H) $(RTL_H) $(srcdir)/../flags.h \
 	$(srcdir)/../input.h $(srcdir)/parse.h $(srcdir)/../system.h \
 	$(srcdir)/../toplev.h $(srcdir)/../../include/obstack.h lex.h \
 	$(srcdir)/../dwarfout.h hash.h
 loop.o : loop.c $(CONFIG_H) $(RTL_H) $(CHILL_TREE_H) lex.h \
 	$(srcdir)/../flags.h $(srcdir)/../input.h \
 	$(srcdir)/../../include/obstack.h $(srcdir)/../tree.h \
 	$(srcdir)/../system.h $(srcdir)/../toplev.h
 parse.o : parse.c $(CONFIG_H) $(CHILL_TREE_H) parse.h \
 	lex.h actions.h tasking.h $(srcdir)/../system.h $(srcdir)/../toplev.h
 satisfy.o : satisfy.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../tree.h \
 	$(srcdir)/../flags.h lex.h $(srcdir)/../system.h $(srcdir)/../toplev.h
 timing.o : timing.c $(CONFIG_H) $(CHILL_TREE_H) $(RTL_H) $(srcdir)/../flags.h \
 	$(srcdir)/../input.h $(srcdir)/../../include/obstack.h lex.h \
 	$(srcdir)/../system.h $(srcdir)/../toplev.h
 tasking.o : tasking.c $(CONFIG_H) $(CHILL_TREE_H) $(RTL_H) \
 	$(srcdir)/../flags.h $(srcdir)/../input.h \
 	$(srcdir)/../../include/obstack.h lex.h $(srcdir)/../system.h \
 	$(srcdir)/../toplev.h
 tree.o : tree.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../system.h \
 	$(srcdir)/../toplev.h
 typeck.o : typeck.c $(CONFIG_H) $(CHILL_TREE_H) ../insn-codes.h \
 	$(srcdir)/../expr.h ../insn-codes.h $(srcdir)/../flags.h lex.h \
 	$(srcdir)/../system.h $(srcdir)/../toplev.h
 ch-version.o : ch-version.c
 ch-version.c : Makefile
 	echo 'char *gnuchill_version = "$(GNUCHILL_VERSION)";' > $@

 ## This is ugly, but I don't want GNU make to put these variables in
 ## the environment.  Older makes will see this as a set of targets
 ## with no dependencies and no actions.
 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :


 # These exist for maintenance purposes.

 # Update the tags table.
 TAGS: force
 	cd $(srcdir);							\
 	etags *.y *.h *.c *.l ../*.h ../*.c;				\

 .PHONY: TAGS

 force:
	# Makefile for GNU CHILL compiler.
	# Copyright (C) 1987, 88, 90-94, 1998, 1999 Free Software Foundation, Inc.

	#This file is part of GNU CC.

	#GNU CC is free software; you can redistribute it and/or modify
	#it under the terms of the GNU General Public License as published by
	#the Free Software Foundation; either version 2, or (at your option)
	#any later version.

	#GNU CC is distributed in the hope that it will be useful,
	#but WITHOUT ANY WARRANTY; without even the implied warranty of
	#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	#GNU General Public License for more details.

	#You should have received a copy of the GNU General Public License
	#along with GNU CC; see the file COPYING. If not, write to
	#the Free Software Foundation, 59 Temple Place - Suite 330,
	#Boston, MA 02111-1307, USA. */

	# The makefile built from this file lives in the language subdirectory.
	# It's purpose is to provide support for:
	#
	# 1) recursion where necessary, and only then (building .o's), and
	# 2) building and debugging cc1 from the language subdirectory, and
	# 3) nothing else.
	#
	# The parent makefile handles all other chores, with help from the
	# language makefile fragment, of course.
	#
	# The targets for external use are:
	# all, TAGS, ???mostlyclean, ???clean.

	# Suppress smart makes who think they know how to automake Yacc files
	.y.c:


	# Variables that exist for you to override.
	# See below for how to change them for certain systems.

	ALLOCA =

	# Various ways of specifying flags for compilations:
	# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
	# BOOT_CFLAGS is the value of CFLAGS to pass
	# to the stage2 and stage3 compilations
	# XCFLAGS is used for most compilations but not when using the GCC just built.
	XCFLAGS =
	CFLAGS = -g
	BOOT_CFLAGS = -O $(CFLAGS)
	# These exists to be overridden by the x-* and t-* files, respectively.
	X_CFLAGS =
	T_CFLAGS =

	X_CPPFLAGS =
	T_CPPFLAGS =

	CC = cc
	AR = ar
	AR_FLAGS = rc
	SHELL = /bin/sh
	MAKEINFO = makeinfo
	TEXI2DVI = texi2dvi

	# Define this as & to perform parallel make on a Sequent.
	# Note that this has some bugs, and it seems currently necessary
	# to compile all the gen* files first by hand to avoid erroneous results.
	P =

	# This is used in the definition of SUBDIR_USE_ALLOCA.
	# ??? Perhaps it would be better if it just looked for gcc.
	OLDCC = cc

	# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
	# It omits XCFLAGS, and specifies -B./.
	# It also specifies -B$(tooldir)/ to find as and ld for a cross compiler.
	GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS)

	# Tools to use when building a cross-compiler.
	# These are used because `configure' appends `cross-make'
	# to the makefile when making a cross-compiler.

	# CYGNUS LOCAL: we don't use cross-make. Instead we use the tools
	# from the build tree, if they are available.
	# program_transform_name and objdir are set by configure.in.
	program_transform_name =
	objdir = .

	target= ... `configure' substitutes actual target name here.
	xmake_file= ... `configure' substitutes actual x- file name here.
	tmake_file= ... `configure' substitutes actual t- file name here.
	#version=`sed -e 's/.\"\([^ \"]\)[ \"].*/\1/' < $(srcdir)/version.c`
	#mainversion=`sed -e 's/.\"\([0-9]\.[0-9]\)./\1/' < $(srcdir)/version.c`

	# Directory where sources are, from where we are.
	srcdir = .

	# CYGNUS LOCAL
	# Directory where texinfo.tex lives
	texidir = $(srcdir)/../../texinfo

	# Additional system libraries to link with.
	CLIB=

	# Change this to a null string if obstacks are installed in the
	# system library.
	OBSTACK=obstack.o

	# Choose the real default target.
	ALL=all

	# End of variables for you to override.

	# Definition of `all' is here so that new rules inserted by sed
	# do not specify the default target.
	all: all.indirect

	# This tells GNU Make version 3 not to put all variables in the environment.
	.NOEXPORT:

	# sed inserts variable overrides after the following line.
	####target overrides
	####host overrides
	####cross overrides
	####build overrides
	####site overrides
	#
	# Now figure out from those variables how to compile and link.

	all.indirect: Makefile ../chill ../cc1chill$(exeext)

	# IN_GCC tells obstack.h that we are using gcc's <stddef.h> file.
	INTERNAL_CFLAGS = $(CROSS) -DIN_GCC

	# This is the variable actually used when we compile.
	ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS)

	# Likewise.
	ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)

	# CYGNUS LOCAL: SUBDIR_USE_ALLOCA is different from FSF.
	# Even if ALLOCA is set, don't use it if compiling with GCC.

	SUBDIR_OBSTACK = `if [ x$(OBSTACK) != x ]; then echo ../$(OBSTACK); else true; fi`
	#SUBDIR_USE_ALLOCA = `case "${CC}" in "${OLDCC}") if [ x$(ALLOCA) != x ]; then echo ../$(ALLOCA); else true; fi ;; esac`
	SUBDIR_USE_ALLOCA = `if [ x$(ALLOCA) != x ]; then echo ../$(ALLOCA); else true; fi`
	SUBDIR_MALLOC = `if [ x$(MALLOC) != x ]; then echo ../$(MALLOC); else true; fi`

	# How to link with both our special library facilities
	# and the system's installed libraries.
	LIBS = $(SUBDIR_OBSTACK) $(SUBDIR_USE_ALLOCA) $(SUBDIR_MALLOC) $(CLIB)

	# Specify the directories to be searched for header files.
	# Both . and srcdir are used, in that order,
	# so that tm.h and config.h will be found in the compilation
	# subdirectory rather than in the source directory.
	INCLUDES = -I. -I.. -I$(srcdir) -I$(srcdir)/.. -I$(srcdir)/../config -I$(srcdir)/../../include

	# Flags to pass to recursive makes.
	# ??? $(CC) may need some work to handle stage[123].
	# ??? The choices here will need some experimenting with.
	FLAGS_TO_PASS = \
	"AR_FLAGS=$(AR_FLAGS)" \
	"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
	"BISON=$(BISON)" \
	"BISONFLAGS=$(BISONFLAGS)" \
	"CC=$(CC)" \
	"CFLAGS=$(CFLAGS)" \
	"GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
	"LDFLAGS=$(LDFLAGS)" \
	"LEX=$(LEX)" \
	"LEXFLAGS=$(LEXFLAGS)" \
	"MAKEINFO=$(MAKEINFO)" \
	"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
	"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
	"RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
	"SHELL=$(SHELL)" \
	"exec_prefix=$(exec_prefix)" \
	"prefix=$(prefix)" \
	"tooldir=$(tooldir)" \
	"bindir=$(bindir)" \
	"libsubdir=$(libsubdir)"

	# Always use -I$(srcdir)/config when compiling.
	.c.o:
	$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<

	# This tells GNU make version 3 not to export all the variables
	# defined in this file into the environment.
	.NOEXPORT:
	#
	# Lists of files for various purposes.

	# Language-specific object files for CHILL

	#C_OBJS = ../cpplib.o ../cppexp.o ../cpphash.o ../cpperror.o

	CHILL_OBJS = parse.o actions.o except.o grant.o lang.o \
	tree.o lex.o decl.o typeck.o convert.o expr.o loop.o \
	tasking.o timing.o inout.o satisfy.o ch-version.o

	# Language-independent object files.
	OBJS = `cat ../stamp-objlist`
	OBJDEPS = ../stamp-objlist

	../cc1chill$(exeext): $(P) $(CHILL_OBJS) $(OBJDEPS) $(LIBDEPS)
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(CHILL_OBJS) \
	$(OBJS) $(C_OBJS) $(LIBS)

	# This executable is used in the CHILL regression
	# test script
	utils/printf : $(srcdir)/utils/printf.c
	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $<

	#
	# This is the top-level trigger for a CHILL regression test.
	# It also builds those tools needed for CHILL regression testing.
	#
	check: ../cc1chill$(exeext) utils/printf
	cd ..; $(MAKE) $(FLAGS_TO_PASS) xgcc gcov cpp cc1 ld
	$(srcdir)/regression.sh -d -p

	clean-tests:
	cd testsuite/execute; $(MAKE) clean
	cd testsuite/execute/oe; $(MAKE) clean
	cd testsuite/compile/elektra; $(MAKE) clean
	cd testsuite/compile/votrics; $(MAKE) clean
	cd testsuite/compile; $(MAKE) clean
	cd testsuite/noncompile; $(MAKE) clean
	cd testsuite/examples; $(MAKE) clean

	mostlyclean:
	test -d testsuite && $(MAKE) clean-tests
	rm -f *.o

	clean: mostlyclean

	#
	Makefile: $(srcdir)/Makefile.in $(srcdir)/../configure
	cd ..; $(SHELL) config.status

	native: config.status ../cc1chill$(exeext) ../chill
	#
	# Compiling object files from source files.

	# Note that dependencies on obstack.h are not written
	# because that file is not part of GCC.

	# CHILL language specific files.

	RTL_H = $(srcdir)/../rtl.h $(srcdir)/../rtl.def \
	$(srcdir)/../machmode.h $(srcdir)/../machmode.def
	TREE_H = $(srcdir)/../tree.h $(srcdir)/../real.h $(srcdir)/../tree.def \
	$(srcdir)/../machmode.h $(srcdir)/../machmode.def
	CHILL_TREE_H = $(TREE_H) ch-tree.h ch-tree.def

	# hash.h really depends on $(srcdir)/gperf.
	# But this would screw things for people that don't have gperf,
	# if gperf got touched, say.
	# Thus you have to remove hash.h to force it to be re-made.
	# Note: CHILL requires two sets of keywords, one all uppercase and
	# one all lowercase. The hash table ends up with both sets in it.
	$(srcdir)/hash.h:
	sed -e '1,/^%%/d' < $(srcdir)/gperf \| \
	sed '/^[^a-zA-Z]/d' \| tr "[a-z]" "[A-Z]" > gperf.tmp
	gawk '{ printf ("s/^%s,/%s,/\n", $$1, toupper ($$1)) }' < gperf.tmp > sed.tmp
	sed -f sed.tmp < gperf.tmp > gperf.tmp2
	cat $(srcdir)/gperf gperf.tmp2 > gperf.tmp
	gperf -L C -F ', 0, 0, 0' -D -E -S1 -p -j1 -i 1 -g -o -t -k'*' \
	gperf.tmp > $(srcdir)/hash.h
	$(RM) gperf.tmp gperf.tmp2 sed.tmp

	actions.o : actions.c $(CONFIG_H) $(CHILL_TREE_H) actions.h $(RTL_H) \
	lex.h $(srcdir)/../flags.h $(srcdir)/../../include/obstack.h \
	$(srcdir)/../input.h $(srcdir)/../expr.h ../insn-codes.h \
	$(srcdir)/../system.h $(srcdir)/../toplev.h
	convert.o : convert.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../flags.h \
	$(srcdir)/../tree.h $(srcdir)/../system.h $(srcdir)/../toplev.h
	decl.o : decl.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../flags.h lex.h \
	$(srcdir)/../system.h $(srcdir)/../toplev.h
	except.o : except.c $(CONFIG_H) $(srcdir)/../tree.h $(RTL_H) $(CHILL_TREE_H) \
	$(srcdir)/../system.h $(srcdir)/../toplev.h
	expr.o : expr.c $(CONFIG_H) $(RTL_H) $(CHILL_TREE_H) $(srcdir)/../flags.h \
	$(srcdir)/../expr.h ../insn-codes.h $(srcdir)/../tree.h lex.h \
	$(srcdir)/../system.h $(srcdir)/../toplev.h
	grant.o: grant.c $(CONFIG_H) $(CHILL_TREE_H) $(RTL_H) $(srcdir)/../flags.h \
	$(srcdir)/../input.h lex.h actions.h $(srcdir)/../system.h \
	$(srcdir)/../toplev.h $(srcdir)/../output.h
	inout.o : inout.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../flags.h \
	$(srcdir)/../input.h $(srcdir)/../system.h $(srcdir)/../toplev.h
	lang.o : lang.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../input.h lex.h \
	$(srcdir)/../system.h $(srcdir)/../toplev.h
	lex.o : lex.c $(CONFIG_H) $(CHILL_TREE_H) $(RTL_H) $(srcdir)/../flags.h \
	$(srcdir)/../input.h $(srcdir)/parse.h $(srcdir)/../system.h \
	$(srcdir)/../toplev.h $(srcdir)/../../include/obstack.h lex.h \
	$(srcdir)/../dwarfout.h hash.h
	loop.o : loop.c $(CONFIG_H) $(RTL_H) $(CHILL_TREE_H) lex.h \
	$(srcdir)/../flags.h $(srcdir)/../input.h \
	$(srcdir)/../../include/obstack.h $(srcdir)/../tree.h \
	$(srcdir)/../system.h $(srcdir)/../toplev.h
	parse.o : parse.c $(CONFIG_H) $(CHILL_TREE_H) parse.h \
	lex.h actions.h tasking.h $(srcdir)/../system.h $(srcdir)/../toplev.h
	satisfy.o : satisfy.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../tree.h \
	$(srcdir)/../flags.h lex.h $(srcdir)/../system.h $(srcdir)/../toplev.h
	timing.o : timing.c $(CONFIG_H) $(CHILL_TREE_H) $(RTL_H) $(srcdir)/../flags.h \
	$(srcdir)/../input.h $(srcdir)/../../include/obstack.h lex.h \
	$(srcdir)/../system.h $(srcdir)/../toplev.h
	tasking.o : tasking.c $(CONFIG_H) $(CHILL_TREE_H) $(RTL_H) \
	$(srcdir)/../flags.h $(srcdir)/../input.h \
	$(srcdir)/../../include/obstack.h lex.h $(srcdir)/../system.h \
	$(srcdir)/../toplev.h
	tree.o : tree.c $(CONFIG_H) $(CHILL_TREE_H) $(srcdir)/../system.h \
	$(srcdir)/../toplev.h
	typeck.o : typeck.c $(CONFIG_H) $(CHILL_TREE_H) ../insn-codes.h \
	$(srcdir)/../expr.h ../insn-codes.h $(srcdir)/../flags.h lex.h \
	$(srcdir)/../system.h $(srcdir)/../toplev.h
	ch-version.o : ch-version.c
	ch-version.c : Makefile
	echo 'char *gnuchill_version = "$(GNUCHILL_VERSION)";' > $@

	## This is ugly, but I don't want GNU make to put these variables in
	## the environment. Older makes will see this as a set of targets
	## with no dependencies and no actions.
	unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :


	# These exist for maintenance purposes.

	# Update the tags table.
	TAGS: force
	cd $(srcdir); \
	etags .y .h .c .l ../.h ../.c; \

	.PHONY: TAGS

	force: