;;- Machine description for GNU C compiler for Alliant FX systems ;; Copyright (C) 1989, 1994, 1996 Free Software Foundation, Inc. ;; Adapted from m68k.md by Paul Petersen (petersen@uicsrd.csrd.uiuc.edu) ;; and Joe Weening (weening@gang-of-four.stanford.edu).

;; This file is part of GNU CC.

;; GNU CC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version.

;; GNU CC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License ;; along with GNU CC; see the file COPYING. If not, write to ;; the Free Software Foundation, 59 Temple Place - Suite 330, ;; Boston, MA 02111-1307, USA.

;;- instruction definitions

;;- @@The original PO technology requires these to be ordered by speed, ;;- @@ so that assigner will pick the fastest.

;;- See file “rtl.def” for documentation on define_insn, match_*, et. al.

;;- When naming insn's (operand 0 of define_insn) be careful about using ;;- names from other targets machine descriptions.

;;- cpp macro #define NOTICE_UPDATE_CC in file tm.h handles condition code ;;- updates for most instructions.

;;- Operand classes for the register allocator: ;;- ‘a’ one of the address registers can be used. ;;- ‘d’ one of the data registers can be used. ;;- ‘f’ one of the CE floating point registers can be used ;;- ‘r’ either a data or an address register can be used.

;;- Immediate integer operand constraints: ;;- ‘I’ 1 .. 8 ;;- ‘J’ -32768 .. 32767 ;;- ‘K’ -128 .. 127 ;;- ‘L’ -8 .. -1

;;- Some remnants of constraint codes for the m68k (‘x’,‘y’,‘G’,‘H’) ;;- may remain in the insn definitions.

;;- Some of these insn‘s are composites of several Alliant op codes. ;;- The assembler (or final @@??) insures that the appropriate one is ;;- selected.  ;; We don’t want to allow a constant operand for test insns because ;; (set (cc0) (const_int foo)) has no mode information. Such insns will ;; be folded while optimizing anyway.

(define_insn “tstsi” [(set (cc0) (match_operand:SI 0 “nonimmediate_operand” “rm”))] "" “* { if (TARGET_68020 || ! ADDRESS_REG_P (operands[0])) return "tst%.l %0"; /* If you think that the 68020 does not support tstl a0, reread page B-167 of the 68020 manual more carefully. / / On an address reg, cmpw may replace cmpl. */ return "cmp%.w %#0,%0"; }”)

(define_insn “tsthi” [(set (cc0) (match_operand:HI 0 “nonimmediate_operand” “rm”))] "" “* { if (TARGET_68020 || ! ADDRESS_REG_P (operands[0])) return "tst%.w %0"; return "cmp%.w %#0,%0"; }”)

(define_insn “tstqi” [(set (cc0) (match_operand:QI 0 “nonimmediate_operand” “dm”))] "" “tst%.b %0”)

(define_insn “tstsf” [(set (cc0) (match_operand:SF 0 “nonimmediate_operand” “fm”))] “TARGET_CE” “* { cc_status.flags = CC_IN_FP; return "ftest%.s %0"; }”)

(define_insn “tstdf” [(set (cc0) (match_operand:DF 0 “nonimmediate_operand” “fm”))] “TARGET_CE” “* { cc_status.flags = CC_IN_FP; return "ftest%.d %0"; }”)  ;; compare instructions.

;; A composite of the cmp, cmpa, & cmpi m68000 op codes. (define_insn “cmpsi” [(set (cc0) (compare (match_operand:SI 0 “nonimmediate_operand” “rKs,mr,>”) (match_operand:SI 1 “general_operand” “mr,Ksr,>”)))] "" “* { if (GET_CODE (operands[0]) == MEM && GET_CODE (operands[1]) == MEM) return "cmpm%.l %1,%0"; if (REG_P (operands[1]) || (!REG_P (operands[0]) && GET_CODE (operands[0]) != MEM)) { cc_status.flags |= CC_REVERSED; return "cmp%.l %d0,%d1"; } return "cmp%.l %d1,%d0"; }”)

(define_insn “cmphi” [(set (cc0) (compare (match_operand:HI 0 “nonimmediate_operand” “rnm,d,n,m”) (match_operand:HI 1 “general_operand” “d,rnm,m,n”)))] "" “* { if (GET_CODE (operands[0]) == MEM && GET_CODE (operands[1]) == MEM) return "cmpm%.w %1,%0"; if ((REG_P (operands[1]) && !ADDRESS_REG_P (operands[1])) || (!REG_P (operands[0]) && GET_CODE (operands[0]) != MEM)) { cc_status.flags |= CC_REVERSED; return "cmp%.w %d0,%d1"; } return "cmp%.w %d1,%d0"; }”)

(define_insn “cmpqi” [(set (cc0) (compare (match_operand:QI 0 “nonimmediate_operand” “dn,md,>”) (match_operand:QI 1 “general_operand” “dm,nd,>”)))] "" “* { if (GET_CODE (operands[0]) == MEM && GET_CODE (operands[1]) == MEM) return "cmpm%.b %1,%0"; if (REG_P (operands[1]) || (!REG_P (operands[0]) && GET_CODE (operands[0]) != MEM)) { cc_status.flags |= CC_REVERSED; return "cmp%.b %d0,%d1"; } return "cmp%.b %d1,%d0"; }”)

(define_insn “cmpdf” [(set (cc0) (compare (match_operand:DF 0 “nonimmediate_operand” “f,m”) (match_operand:DF 1 “nonimmediate_operand” “fm,f”)))] “TARGET_CE” “* { cc_status.flags = CC_IN_FP; if (FP_REG_P (operands[0])) return "fcmp%.d %1,%0"; cc_status.flags |= CC_REVERSED; return "fcmp%.d %0,%1"; }”)

(define_insn “cmpsf” [(set (cc0) (compare (match_operand:SF 0 “nonimmediate_operand” “f,m”) (match_operand:SF 1 “nonimmediate_operand” “fm,f”)))] “TARGET_CE” “* { cc_status.flags = CC_IN_FP; if (FP_REG_P (operands[0])) return "fcmp%.s %1,%0"; cc_status.flags |= CC_REVERSED; return "fcmp%.s %0,%1"; }”)  ;; Recognizers for btst instructions.

(define_insn "" [(set (cc0) (zero_extract (match_operand:QI 0 “memory_operand” “o”) (const_int 1) (minus:SI (const_int 7) (match_operand:SI 1 “general_operand” “di”))))] "" “* { return output_btst (operands, operands[1], operands[0], insn, 7); }”)

(define_insn "" [(set (cc0) (zero_extract (match_operand:SI 0 “register_operand” “d”) (const_int 1) (minus:SI (const_int 31) (match_operand:SI 1 “general_operand” “di”))))] "" “* { return output_btst (operands, operands[1], operands[0], insn, 31); }”)

;; The following two patterns are like the previous two ;; except that they use the fact that bit-number operands ;; are automatically masked to 3 or 5 bits.

(define_insn "" [(set (cc0) (zero_extract (match_operand:QI 0 “memory_operand” “o”) (const_int 1) (minus:SI (const_int 7) (and:SI (match_operand:SI 1 “general_operand” “d”) (const_int 7)))))] "" “* { return output_btst (operands, operands[1], operands[0], insn, 7); }”)

(define_insn "" [(set (cc0) (zero_extract (match_operand:SI 0 “register_operand” “d”) (const_int 1) (minus:SI (const_int 31) (and:SI (match_operand:SI 1 “general_operand” “d”) (const_int 31)))))] "" “* { return output_btst (operands, operands[1], operands[0], insn, 31); }”)

;; Nonoffsettable mem refs are ok in this one pattern ;; since we don't try to adjust them. (define_insn "" [(set (cc0) (zero_extract (match_operand:QI 0 “memory_operand” “m”) (const_int 1) (match_operand:SI 1 “general_operand” “i”)))] “GET_CODE (operands[1]) == CONST_INT && (unsigned) INTVAL (operands[1]) < 8” “* { operands[1] = GEN_INT (7 - INTVAL (operands[1])); return output_btst (operands, operands[1], operands[0], insn, 7); }”)

(define_insn "" [(set (cc0) (zero_extract (match_operand:SI 0 “register_operand” “do”) (const_int 1) (match_operand:SI 1 “general_operand” “i”)))] “GET_CODE (operands[1]) == CONST_INT” “* { if (GET_CODE (operands[0]) == MEM) { operands[0] = adj_offsettable_operand (operands[0], INTVAL (operands[1]) / 8); operands[1] = GEN_INT (7 - INTVAL (operands[1]) % 8); return output_btst (operands, operands[1], operands[0], insn, 7); } operands[1] = GEN_INT (31 - INTVAL (operands[1])); return output_btst (operands, operands[1], operands[0], insn, 31); }”)

 ;; move instructions

;; A special case in which it is not desirable ;; to reload the constant into a data register. (define_insn "" [(set (match_operand:SI 0 “push_operand” “=m”) (match_operand:SI 1 “general_operand” “J”))] “GET_CODE (operands[1]) == CONST_INT && INTVAL (operands[1]) >= -0x8000 && INTVAL (operands[1]) < 0x8000” “* { if (operands[1] == const0_rtx) return "clr%.l %0"; return "pea %a1"; }”)

;This is never used. ;(define_insn “swapsi” ; [(set (match_operand:SI 0 “general_operand” “r”) ; (match_operand:SI 1 “general_operand” “r”)) ; (set (match_dup 1) (match_dup 0))] ; "" ; “exg %1,%0”)

;; Special case of fullword move when source is zero. ;; The reason this is special is to avoid loading a zero ;; into a data reg with moveq in order to store it elsewhere.

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=a,g”) (const_int 0))] "" “@ sub%.l %0,%0 clr%.l %0”)

;; General case of fullword move. The register constraints ;; force integer constants in range for a moveq to be reloaded ;; if they are headed for memory. (define_insn “movsi” ;; Notes: make sure no alternative allows g vs g. ;; We don't allow f-regs since fixed point cannot go in them. ;; We do allow y and x regs since fixed point is allowed in them. [(set (match_operand:SI 0 “general_operand” “=g,da,y,!xr*m”) (match_operand:SI 1 “general_operand” “daymKs,i,g,xr*m”))] "" “* { if (GET_CODE (operands[1]) == CONST_INT) { if (operands[1] == const0_rtx && (DATA_REG_P (operands[0]) || GET_CODE (operands[0]) == MEM)) return "clr%.l %0"; else if (DATA_REG_P (operands[0]) && INTVAL (operands[1]) < 128 && INTVAL (operands[1]) >= -128) return "moveq %1,%0"; else if (ADDRESS_REG_P (operands[0]) && INTVAL (operands[1]) < 0x8000 && INTVAL (operands[1]) >= -0x8000) return "mov%.w %1,%0"; else if (push_operand (operands[0], SImode) && INTVAL (operands[1]) < 0x8000 && INTVAL (operands[1]) >= -0x8000) return "pea %a1"; } else if ((GET_CODE (operands[1]) == SYMBOL_REF || GET_CODE (operands[1]) == CONST) && push_operand (operands[0], SImode)) return "pea %a1"; else if ((GET_CODE (operands[1]) == SYMBOL_REF || GET_CODE (operands[1]) == CONST) && ADDRESS_REG_P (operands[0])) return "lea %a1,%0"; return "mov%.l %1,%0"; }”)

(define_insn “movhi” [(set (match_operand:HI 0 “general_operand” “=g”) (match_operand:HI 1 “general_operand” “g”))] "" “* { if (GET_CODE (operands[1]) == CONST_INT) { if (operands[1] == const0_rtx && (DATA_REG_P (operands[0]) || GET_CODE (operands[0]) == MEM)) return "clr%.w %0"; else if (DATA_REG_P (operands[0]) && INTVAL (operands[1]) < 128 && INTVAL (operands[1]) >= -128) { return "moveq %1,%0"; } else if (INTVAL (operands[1]) < 0x8000 && INTVAL (operands[1]) >= -0x8000) return "mov%.w %1,%0"; } else if (CONSTANT_P (operands[1])) return "mov%.l %1,%0"; /* Recognize the insn before a tablejump, one that refers to a table of offsets. Such an insn will need to refer to a label on the insn. So output one. Use the label-number of the table of offsets to generate this label. */ if (GET_CODE (operands[1]) == MEM && GET_CODE (XEXP (operands[1], 0)) == PLUS && (GET_CODE (XEXP (XEXP (operands[1], 0), 0)) == LABEL_REF || GET_CODE (XEXP (XEXP (operands[1], 0), 1)) == LABEL_REF) && GET_CODE (XEXP (XEXP (operands[1], 0), 0)) != PLUS && GET_CODE (XEXP (XEXP (operands[1], 0), 1)) != PLUS) { rtx labelref; if (GET_CODE (XEXP (XEXP (operands[1], 0), 0)) == LABEL_REF) labelref = XEXP (XEXP (operands[1], 0), 0); else labelref = XEXP (XEXP (operands[1], 0), 1); ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LI", CODE_LABEL_NUMBER (XEXP (labelref, 0))); } return "mov%.w %1,%0"; }”)

(define_insn “movstricthi” [(set (strict_low_part (match_operand:HI 0 “general_operand” “+dm”)) (match_operand:HI 1 “general_operand” “rmn”))] "" “* { if (operands[1] == const0_rtx) return "clr%.w %0"; return "mov%.w %1,%0"; }”)

(define_insn “movqi” [(set (match_operand:QI 0 “general_operand” “=d,*a,m,m,?*a”) (match_operand:QI 1 “general_operand” “dmia,da,dmi,?*a,m”))] "" “* { rtx xoperands[4]; if (ADDRESS_REG_P (operands[0]) && GET_CODE (operands[1]) == MEM) { xoperands[1] = operands[1]; xoperands[2] = gen_rtx (MEM, QImode, gen_rtx (PLUS, VOIDmode, stack_pointer_rtx, const1_rtx)); xoperands[3] = stack_pointer_rtx; /* Just pushing a byte puts it in the high byte of the halfword. / / We must put it in the low half, the second byte. */ output_asm_insn ("subq%.w %#2,%3;mov%.b %1,%2", xoperands); return "mov%.w %+,%0"; } if (ADDRESS_REG_P (operands[1]) && GET_CODE (operands[0]) == MEM) { xoperands[0] = operands[0]; xoperands[1] = operands[1]; xoperands[2] = gen_rtx (MEM, QImode, gen_rtx (PLUS, VOIDmode, stack_pointer_rtx, const1_rtx)); xoperands[3] = stack_pointer_rtx; output_asm_insn ("mov%.w %1,%-;mov%.b %2,%0;addq%.w %#2,%3", xoperands); return ""; } if (operands[1] == const0_rtx) return "clr%.b %0"; if (GET_CODE (operands[1]) == CONST_INT && INTVAL (operands[1]) == -1) return "st %0"; if (GET_CODE (operands[1]) != CONST_INT && CONSTANT_P (operands[1])) return "mov%.l %1,%0"; if (ADDRESS_REG_P (operands[0]) || ADDRESS_REG_P (operands[1])) return "mov%.w %1,%0"; return "mov%.b %1,%0"; }”)

(define_insn “movstrictqi” [(set (strict_low_part (match_operand:QI 0 “general_operand” “+dm”)) (match_operand:QI 1 “general_operand” “dmn”))] "" “* { if (operands[1] == const0_rtx) return "clr%.b %0"; return "mov%.b %1,%0"; }”)

;; Floating-point moves on a CE are faster using an FP register than ;; with movl instructions. (Especially for double floats, but also ;; for single floats, even though it takes an extra instruction.) But ;; on an IP, the FP registers are simulated and so should be avoided. ;; We do this by using define_expand for movsf and movdf, and using ;; different constraints for each target type. The constraints for ;; TARGET_CE allow general registers because they sometimes need to ;; hold floats, but they are not preferable.

(define_expand “movsf” [(set (match_operand:SF 0 “general_operand” "") (match_operand:SF 1 “nonimmediate_operand” ""))] "" "")

(define_insn "" [(set (match_operand:SF 0 “general_operand” “=f,m,!r,!fm”) (match_operand:SF 1 “nonimmediate_operand” “fm,f,frm,*r”))] “TARGET_CE” “* { if (FP_REG_P (operands[0])) { if (FP_REG_P (operands[1])) return "fmove%.s %1,%0"; if (REG_P (operands[1])) return "mov%.l %1,%-;fmove%.s %+,%0"; return "fmove%.s %1,%0"; } if (FP_REG_P (operands[1])) { if (REG_P (operands[0])) return "fmove%.s %1,%-;mov%.l %+,%0"; return "fmove%.s %1,%0"; } return "mov%.l %1,%0"; }”)

(define_insn "" [(set (match_operand:SF 0 “general_operand” “=frm”) (match_operand:SF 1 “nonimmediate_operand” “frm”))] “!TARGET_CE” “* { if (FP_REG_P (operands[0])) { if (FP_REG_P (operands[1])) return "fmove%.s %1,%0"; if (REG_P (operands[1])) return "mov%.l %1,%-;fmove%.s %+,%0"; return "fmove%.s %1,%0"; } if (FP_REG_P (operands[1])) { if (REG_P (operands[0])) return "fmove%.s %1,%-;mov%.l %+,%0"; return "fmove%.s %1,%0"; } return "mov%.l %1,%0"; }”)

(define_expand “movdf” [(set (match_operand:DF 0 “general_operand” "") (match_operand:DF 1 “nonimmediate_operand” ""))] "" "")

(define_insn "" [(set (match_operand:DF 0 “general_operand” “=f,m,!r,!fm”) (match_operand:DF 1 “nonimmediate_operand” “fm,f,frm,*r”))] “TARGET_CE” “* { if (FP_REG_P (operands[0])) { if (FP_REG_P (operands[1])) return "fmove%.d %1,%0"; if (REG_P (operands[1])) { rtx xoperands[2]; xoperands[1] = gen_rtx (REG, SImode, REGNO (operands[1]) + 1); output_asm_insn ("mov%.l %1,%-", xoperands); output_asm_insn ("mov%.l %1,%-", operands); return "fmove%.d %+,%0"; } return "fmove%.d %1,%0"; } else if (FP_REG_P (operands[1])) { if (REG_P (operands[0])) { output_asm_insn ("fmove%.d %1,%-;mov%.l %+,%0", operands); operands[0] = gen_rtx (REG, SImode, REGNO (operands[0]) + 1); return "mov%.l %+,%0"; } return "fmove%.d %1,%0"; } return output_move_double (operands); }”)

(define_insn "" [(set (match_operand:DF 0 “general_operand” “=frm”) (match_operand:DF 1 “nonimmediate_operand” “frm”))] “!TARGET_CE” “* { if (FP_REG_P (operands[0])) { if (FP_REG_P (operands[1])) return "fmove%.d %1,%0"; if (REG_P (operands[1])) { rtx xoperands[2]; xoperands[1] = gen_rtx (REG, SImode, REGNO (operands[1]) + 1); output_asm_insn ("mov%.l %1,%-", xoperands); output_asm_insn ("mov%.l %1,%-", operands); return "fmove%.d %+,%0"; } return "fmove%.d %1,%0"; } else if (FP_REG_P (operands[1])) { if (REG_P (operands[0])) { output_asm_insn ("fmove%.d %1,%-;mov%.l %+,%0", operands); operands[0] = gen_rtx (REG, SImode, REGNO (operands[0]) + 1); return "mov%.l %+,%0"; } return "fmove%.d %1,%0"; } return output_move_double (operands); }”)

(define_insn “movdi” [(set (match_operand:DI 0 “general_operand” “=rm,&r,&ro<>”) (match_operand:DI 1 “general_operand” “r,m,roi<>”))] "" "* { return output_move_double (operands); } ")

;; This goes after the move instructions ;; because the move instructions are better (require no spilling) ;; when they can apply. It goes before the add/sub insns ;; so we will prefer it to them.

(define_insn “pushasi” [(set (match_operand:SI 0 “push_operand” “=m”) (match_operand:SI 1 “address_operand” “p”))] "" “pea %a1”)  ;; truncation instructions (define_insn “truncsiqi2” [(set (match_operand:QI 0 “general_operand” “=dm,d”) (truncate:QI (match_operand:SI 1 “general_operand” “doJ,i”)))] "" “* { if (GET_CODE (operands[0]) == REG) return "mov%.l %1,%0"; if (GET_CODE (operands[1]) == MEM) operands[1] = adj_offsettable_operand (operands[1], 3); return "mov%.b %1,%0"; }”)

(define_insn “trunchiqi2” [(set (match_operand:QI 0 “general_operand” “=dm,d”) (truncate:QI (match_operand:HI 1 “general_operand” “doJ,i”)))] "" “* { if (GET_CODE (operands[0]) == REG && (GET_CODE (operands[1]) == MEM || GET_CODE (operands[1]) == CONST_INT)) return "mov%.w %1,%0"; if (GET_CODE (operands[0]) == REG) return "mov%.l %1,%0"; if (GET_CODE (operands[1]) == MEM) operands[1] = adj_offsettable_operand (operands[1], 1); return "mov%.b %1,%0"; }”)

(define_insn “truncsihi2” [(set (match_operand:HI 0 “general_operand” “=dm,d”) (truncate:HI (match_operand:SI 1 “general_operand” “roJ,i”)))] "" “* { if (GET_CODE (operands[0]) == REG) return "mov%.l %1,%0"; if (GET_CODE (operands[1]) == MEM) operands[1] = adj_offsettable_operand (operands[1], 2); return "mov%.w %1,%0"; }”)  ;; zero extension instructions

(define_expand “zero_extendhisi2” [(set (match_operand:SI 0 “register_operand” "") (const_int 0)) (set (strict_low_part (subreg:HI (match_dup 0) 0)) (match_operand:HI 1 “general_operand” ""))] "" “operands[1] = make_safe_from (operands[1], operands[0]);”)

(define_expand “zero_extendqihi2” [(set (match_operand:HI 0 “register_operand” "") (const_int 0)) (set (strict_low_part (subreg:QI (match_dup 0) 0)) (match_operand:QI 1 “general_operand” ""))] "" “operands[1] = make_safe_from (operands[1], operands[0]);”)

(define_expand “zero_extendqisi2” [(set (match_operand:SI 0 “register_operand” "") (const_int 0)) (set (strict_low_part (subreg:QI (match_dup 0) 0)) (match_operand:QI 1 “general_operand” ""))] "" " operands[1] = make_safe_from (operands[1], operands[0]); ")  ;; Patterns to recognize zero-extend insns produced by the combiner. (define_insn "" [(set (match_operand:SI 0 “general_operand” “=do<>”) (zero_extend:SI (match_operand:HI 1 “nonimmediate_operand” “rm”)))] "" “* { if (DATA_REG_P (operands[0])) { if (GET_CODE (operands[1]) == REG && REGNO (operands[0]) == REGNO (operands[1])) return "and%.l %#0xFFFF,%0"; if (reg_mentioned_p (operands[0], operands[1])) return "mov%.w %1,%0;and%.l %#0xFFFF,%0"; return "clr%.l %0;mov%.w %1,%0"; } else if (GET_CODE (operands[0]) == MEM && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC) return "mov%.w %1,%0;clr%.w %0"; else if (GET_CODE (operands[0]) == MEM && GET_CODE (XEXP (operands[0], 0)) == POST_INC) return "clr%.w %0;mov%.w %1,%0"; else { output_asm_insn ("clr%.w %0", operands); operands[0] = adj_offsettable_operand (operands[0], 2); return "mov%.w %1,%0"; } }”)

(define_insn "" [(set (match_operand:HI 0 “general_operand” “=do<>”) (zero_extend:HI (match_operand:QI 1 “nonimmediate_operand” “dm”)))] "" “* { if (DATA_REG_P (operands[0])) { if (GET_CODE (operands[1]) == REG && REGNO (operands[0]) == REGNO (operands[1])) return "and%.w %#0xFF,%0"; if (reg_mentioned_p (operands[0], operands[1])) return "mov%.b %1,%0;and%.w %#0xFF,%0"; return "clr%.w %0;mov%.b %1,%0"; } else if (GET_CODE (operands[0]) == MEM && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC) { if (REGNO (XEXP (XEXP (operands[0], 0), 0)) == STACK_POINTER_REGNUM) return "clr%.w %-;mov%.b %1,%0"; else return "mov%.b %1,%0;clr%.b %0"; } else if (GET_CODE (operands[0]) == MEM && GET_CODE (XEXP (operands[0], 0)) == POST_INC) return "clr%.b %0;mov%.b %1,%0"; else { output_asm_insn ("clr%.b %0", operands); operands[0] = adj_offsettable_operand (operands[0], 1); return "mov%.b %1,%0"; } }”)

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=do<>”) (zero_extend:SI (match_operand:QI 1 “nonimmediate_operand” “dm”)))] "" “* { if (DATA_REG_P (operands[0])) { if (GET_CODE (operands[1]) == REG && REGNO (operands[0]) == REGNO (operands[1])) return "and%.l %#0xFF,%0"; if (reg_mentioned_p (operands[0], operands[1])) return "mov%.b %1,%0;and%.l %#0xFF,%0"; return "clr%.l %0;mov%.b %1,%0"; } else if (GET_CODE (operands[0]) == MEM && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC) { operands[0] = XEXP (XEXP (operands[0], 0), 0); return "clr%.l %0@-;mov%.b %1,%0@(3)"; } else if (GET_CODE (operands[0]) == MEM && GET_CODE (XEXP (operands[0], 0)) == POST_INC) { operands[0] = XEXP (XEXP (operands[0], 0), 0); return "clr%.l %0@+;mov%.b %1,%0@(-1)"; } else { output_asm_insn ("clr%.l %0", operands); operands[0] = adj_offsettable_operand (operands[0], 3); return "mov%.b %1,%0"; } }”)  ;; sign extension instructions

(define_insn “extendhisi2” [(set (match_operand:SI 0 “general_operand” “=*d,a”) (sign_extend:SI (match_operand:HI 1 “nonimmediate_operand” “0,rmn”)))] "" “@ ext%.l %0 mov%.w %1,%0”)

(define_insn “extendqihi2” [(set (match_operand:HI 0 “general_operand” “=d”) (sign_extend:HI (match_operand:QI 1 “nonimmediate_operand” “0”)))] "" “ext%.w %0”)

(define_insn “extendqisi2” [(set (match_operand:SI 0 “general_operand” “=d”) (sign_extend:SI (match_operand:QI 1 “nonimmediate_operand” “0”)))] “TARGET_68020” “extb%.l %0”)  ;; Conversions between float and double.

(define_insn “extendsfdf2” [(set (match_operand:DF 0 “general_operand” “=f,m”) (float_extend:DF (match_operand:SF 1 “nonimmediate_operand” “fm,f”)))] “TARGET_CE” “fmovesd %1,%0”)

(define_insn “truncdfsf2” [(set (match_operand:SF 0 “general_operand” “=f,m”) (float_truncate:SF (match_operand:DF 1 “nonimmediate_operand” “fm,f”)))] “TARGET_CE” “fmoveds %1,%0”)  ;; Conversion between fixed point and floating point. ;; Note that among the fix-to-float insns ;; the ones that start with SImode come first. ;; That is so that an operand that is a CONST_INT ;; (and therefore lacks a specific machine mode). ;; will be recognized as SImode (which is always valid) ;; rather than as QImode or HImode.

(define_insn “floatsisf2” [(set (match_operand:SF 0 “register_operand” “=f”) (float:SF (match_operand:SI 1 “nonimmediate_operand” “dm”)))] “TARGET_CE” “fmovels %1,%0”)

(define_insn “floatsidf2” [(set (match_operand:DF 0 “register_operand” “=f”) (float:DF (match_operand:SI 1 “nonimmediate_operand” “dm”)))] “TARGET_CE” “fmoveld %1,%0”)

(define_insn “floathisf2” [(set (match_operand:SF 0 “register_operand” “=f”) (float:SF (match_operand:HI 1 “nonimmediate_operand” “dm”)))] “TARGET_CE” “fmovews %1,%0”)

(define_insn “floathidf2” [(set (match_operand:DF 0 “register_operand” “=f”) (float:DF (match_operand:HI 1 “nonimmediate_operand” “dm”)))] “TARGET_CE” “fmovewd %1,%0”)

(define_insn “floatqisf2” [(set (match_operand:SF 0 “register_operand” “=f”) (float:SF (match_operand:QI 1 “nonimmediate_operand” “dm”)))] “TARGET_CE” “fmovebs %1,%0”)

(define_insn “floatqidf2” [(set (match_operand:DF 0 “register_operand” “=f”) (float:DF (match_operand:QI 1 “nonimmediate_operand” “dm”)))] “TARGET_CE” “fmovebd %1,%0”)  ;; Float-to-fix conversion insns.

(define_insn “fix_truncsfqi2” [(set (match_operand:QI 0 “general_operand” “=dm”) (fix:QI (fix:SF (match_operand:SF 1 “register_operand” “f”))))] “TARGET_CE” “fmovesb %1,%0”)

(define_insn “fix_truncsfhi2” [(set (match_operand:HI 0 “general_operand” “=dm”) (fix:HI (fix:SF (match_operand:SF 1 “register_operand” “f”))))] “TARGET_CE” “fmovesw %1,%0”)

(define_insn “fix_truncsfsi2” [(set (match_operand:SI 0 “general_operand” “=dm”) (fix:SI (fix:SF (match_operand:SF 1 “register_operand” “f”))))] “TARGET_CE” “fmovesl %1,%0”)

(define_insn “fix_truncdfqi2” [(set (match_operand:QI 0 “general_operand” “=dm”) (fix:QI (fix:DF (match_operand:DF 1 “register_operand” “f”))))] “TARGET_CE” “fmovedb %1,%0”)

(define_insn “fix_truncdfhi2” [(set (match_operand:HI 0 “general_operand” “=dm”) (fix:HI (fix:DF (match_operand:DF 1 “register_operand” “f”))))] “TARGET_CE” “fmovedw %1,%0”)

(define_insn “fix_truncdfsi2” [(set (match_operand:SI 0 “general_operand” “=dm”) (fix:SI (fix:DF (match_operand:DF 1 “register_operand” “f”))))] “TARGET_CE” “fmovedl %1,%0”)  ;; add instructions

(define_insn “addsi3” [(set (match_operand:SI 0 “general_operand” “=m,r,!a,!a”) (plus:SI (match_operand:SI 1 “general_operand” “%0,0,a,rJK”) (match_operand:SI 2 “general_operand” “dIKLs,mrIKLs,rJK,a”)))] "" "* { if (! operands_match_p (operands[0], operands[1])) { if (!ADDRESS_REG_P (operands[1])) { rtx tmp = operands[1];

  operands[1] = operands[2];
  operands[2] = tmp;
}

  /* These insns can result from reloads to access
 stack slots over 64k from the frame pointer.  */
  if (GET_CODE (operands[2]) == CONST_INT
  && INTVAL (operands[2]) + 0x8000 >= (unsigned) 0x10000)
    return \"mov%.l %2,%0\;add%.l %1,%0\";
  if (GET_CODE (operands[2]) == REG)
return \"lea %1@[%2:L:B],%0\";
  else
return \"lea %1@(%c2),%0\";
}

if (GET_CODE (operands[2]) == CONST_INT) { if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) <= 8) return (ADDRESS_REG_P (operands[0]) ? "addq%.w %2,%0" : "addq%.l %2,%0"); if (INTVAL (operands[2]) < 0 && INTVAL (operands[2]) >= -8) { operands[2] = GEN_INT (- INTVAL (operands[2])); return (ADDRESS_REG_P (operands[0]) ? "subq%.w %2,%0" : "subq%.l %2,%0"); } if (ADDRESS_REG_P (operands[0]) && INTVAL (operands[2]) >= -0x8000 && INTVAL (operands[2]) < 0x8000) return "add%.w %2,%0"; } return "add%.l %2,%0"; }")

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=a”) (plus:SI (match_operand:SI 1 “general_operand” “0”) (sign_extend:SI (match_operand:HI 2 “nonimmediate_operand” “rmn”))))] "" “add%.w %2,%0”)

(define_insn “addhi3” [(set (match_operand:HI 0 “general_operand” “=mr,mr,m,r”) (plus:HI (match_operand:HI 1 “general_operand” “%0,0,0,0”) (match_operand:HI 2 “general_operand” “I,L,dn,rmn”)))] "" “@ addq%.w %2,%0 subq%.w #%n2,%0 add%.w %2,%0 add%.w %2,%0”)

(define_insn "" [(set (strict_low_part (match_operand:HI 0 “general_operand” “+m,d”)) (plus:HI (match_dup 0) (match_operand:HI 1 “general_operand” “dn,rmn”)))] "" “add%.w %1,%0”)

(define_insn “addqi3” [(set (match_operand:QI 0 “general_operand” “=md,mr,m,d”) (plus:QI (match_operand:QI 1 “general_operand” “%0,0,0,0”) (match_operand:QI 2 “general_operand” “I,L,dn,dmn”)))] "" “@ addq%.b %2,%0 subq%.b #%n2,%0 add%.b %2,%0 add%.b %2,%0”)

(define_insn "" [(set (strict_low_part (match_operand:QI 0 “general_operand” “+m,d”)) (plus:QI (match_dup 0) (match_operand:QI 1 “general_operand” “dn,dmn”)))] "" “add%.b %1,%0”)

(define_insn “adddf3” [(set (match_operand:DF 0 “register_operand” “=f”) (plus:DF (match_operand:DF 1 “nonimmediate_operand” “%f”) (match_operand:DF 2 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fadd%.d %2,%1,%0”)

(define_insn “addsf3” [(set (match_operand:SF 0 “register_operand” “=f”) (plus:SF (match_operand:SF 1 “nonimmediate_operand” “%f”) (match_operand:SF 2 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fadd%.s %2,%1,%0”)  ;; subtract instructions

(define_insn “subsi3” [(set (match_operand:SI 0 “general_operand” “=m,r,!a,?d”) (minus:SI (match_operand:SI 1 “general_operand” “0,0,a,mrIKs”) (match_operand:SI 2 “general_operand” “dIKs,mrIKs,J,0”)))] "" “* { if (! operands_match_p (operands[0], operands[1])) { if (operands_match_p (operands[0], operands[2])) { if (GET_CODE (operands[1]) == CONST_INT) { if (INTVAL (operands[1]) > 0 && INTVAL (operands[1]) <= 8) return "subq%.l %1,%0;neg%.l %0"; } return "sub%.l %1,%0;neg%.l %0"; } /* This case is matched by J, but negating -0x8000 in an lea would give an invalid displacement. So do this specially. */ if (INTVAL (operands[2]) == -0x8000) return "mov%.l %1,%0;sub%.l %2,%0"; return "lea %1@(%n2),%0"; } if (GET_CODE (operands[2]) == CONST_INT) { if (INTVAL (operands[2]) > 0 && INTVAL (operands[2]) <= 8) return "subq%.l %2,%0"; if (ADDRESS_REG_P (operands[0]) && INTVAL (operands[2]) >= -0x8000 && INTVAL (operands[2]) < 0x8000) return "sub%.w %2,%0"; } return "sub%.l %2,%0"; }”)

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=a”) (minus:SI (match_operand:SI 1 “general_operand” “0”) (sign_extend:SI (match_operand:HI 2 “nonimmediate_operand” “rmn”))))] "" “sub%.w %2,%0”)

(define_insn “subhi3” [(set (match_operand:HI 0 “general_operand” “=m,r”) (minus:HI (match_operand:HI 1 “general_operand” “0,0”) (match_operand:HI 2 “general_operand” “dn,rmn”)))] "" “sub%.w %2,%0”)

(define_insn "" [(set (strict_low_part (match_operand:HI 0 “general_operand” “+m,d”)) (minus:HI (match_dup 0) (match_operand:HI 1 “general_operand” “dn,rmn”)))] "" “sub%.w %1,%0”)

(define_insn “subqi3” [(set (match_operand:QI 0 “general_operand” “=m,d”) (minus:QI (match_operand:QI 1 “general_operand” “0,0”) (match_operand:QI 2 “general_operand” “dn,dmn”)))] "" “sub%.b %2,%0”)

(define_insn "" [(set (strict_low_part (match_operand:QI 0 “general_operand” “+m,d”)) (minus:QI (match_dup 0) (match_operand:QI 1 “general_operand” “dn,dmn”)))] "" “sub%.b %1,%0”)

(define_insn “subdf3” [(set (match_operand:DF 0 “register_operand” “=f,f,f”) (minus:DF (match_operand:DF 1 “nonimmediate_operand” “f,f,m”) (match_operand:DF 2 “nonimmediate_operand” “f,m,f”)))] “TARGET_CE” “@ fsub%.d %2,%1,%0 fsub%.d %2,%1,%0 frsub%.d %1,%2,%0”)

(define_insn “subsf3” [(set (match_operand:SF 0 “register_operand” “=f,f,f”) (minus:SF (match_operand:SF 1 “nonimmediate_operand” “f,f,m”) (match_operand:SF 2 “nonimmediate_operand” “f,m,f”)))] “TARGET_CE” “@ fsub%.s %2,%1,%0 fsub%.s %2,%1,%0 frsub%.s %1,%2,%0”)  ;; multiply instructions

(define_insn “mulhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (mult:HI (match_operand:HI 1 “general_operand” “%0”) (match_operand:HI 2 “general_operand” “dmn”)))] "" “muls %2,%0”)

(define_insn “mulhisi3” [(set (match_operand:SI 0 “general_operand” “=d”) (mult:SI (sign_extend:SI (match_operand:HI 1 “nonimmediate_operand” “%0”)) (sign_extend:SI (match_operand:HI 2 “nonimmediate_operand” “dm”))))] "" “muls %2,%0”)

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=d”) (mult:SI (sign_extend:SI (match_operand:HI 1 “nonimmediate_operand” “%0”)) (match_operand:SI 2 “const_int_operand” “n”)))] "" “muls %2,%0”)

(define_insn “mulsi3” [(set (match_operand:SI 0 “general_operand” “=d”) (mult:SI (match_operand:SI 1 “general_operand” “%0”) (match_operand:SI 2 “general_operand” “dmsK”)))] “TARGET_68020” “muls%.l %2,%0”)

(define_insn “umulhisi3” [(set (match_operand:SI 0 “general_operand” “=d”) (mult:SI (zero_extend:SI (match_operand:HI 1 “nonimmediate_operand” “%0”)) (zero_extend:SI (match_operand:HI 2 “nonimmediate_operand” “dm”))))] "" “mulu %2,%0”)

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=d”) (mult:SI (zero_extend:SI (match_operand:HI 1 “nonimmediate_operand” “%0”)) (match_operand:SI 2 “const_int_operand” “n”)))] "" “mulu %2,%0”)

(define_insn “muldf3” [(set (match_operand:DF 0 “register_operand” “=f”) (mult:DF (match_operand:DF 1 “nonimmediate_operand” “%f”) (match_operand:DF 2 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fmul%.d %2,%1,%0”)

(define_insn “mulsf3” [(set (match_operand:SF 0 “register_operand” “=f”) (mult:SF (match_operand:SF 1 “nonimmediate_operand” “%f”) (match_operand:SF 2 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fmul%.s %2,%1,%0”)  ;; divide instructions

(define_insn “divhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (div:HI (match_operand:HI 1 “general_operand” “0”) (match_operand:HI 2 “general_operand” “dmn”)))] "" “extl %0;divs %2,%0”)

(define_insn “divhisi3” [(set (match_operand:HI 0 “general_operand” “=d”) (truncate:HI (div:SI (match_operand:SI 1 “general_operand” “0”) (sign_extend:SI (match_operand:HI 2 “nonimmediate_operand” “dm”)))))] "" “divs %2,%0”)

(define_insn "" [(set (match_operand:HI 0 “general_operand” “=d”) (truncate:HI (div:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “const_int_operand” “n”))))] "" “divs %2,%0”)

(define_insn “divsi3” [(set (match_operand:SI 0 “general_operand” “=d”) (div:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “general_operand” “dmsK”)))] “TARGET_68020” “divs%.l %2,%0,%0”)

(define_insn “udivhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (udiv:HI (match_operand:HI 1 “general_operand” “0”) (match_operand:HI 2 “general_operand” “dmn”)))] "" “and%.l %#0xFFFF,%0;divu %2,%0”)

(define_insn “udivhisi3” [(set (match_operand:HI 0 “general_operand” “=d”) (truncate:HI (udiv:SI (match_operand:SI 1 “general_operand” “0”) (zero_extend:SI (match_operand:HI 2 “nonimmediate_operand” “dm”)))))] "" “divu %2,%0”)

(define_insn "" [(set (match_operand:HI 0 “general_operand” “=d”) (truncate:HI (udiv:SI (match_operand:SI 1 “nonimmediate_operand” “0”) (match_operand:HI 2 “const_int_operand” “n”))))] "" “divu %2,%0”)

(define_insn “udivsi3” [(set (match_operand:SI 0 “general_operand” “=d”) (udiv:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “general_operand” “dmsK”)))] “TARGET_68020” “divu%.l %2,%0,%0”)

(define_insn “divdf3” [(set (match_operand:DF 0 “register_operand” “=f,f,f”) (div:DF (match_operand:DF 1 “nonimmediate_operand” “f,f,m”) (match_operand:DF 2 “nonimmediate_operand” “f,m,f”)))] “TARGET_CE” “@ fdiv%.d %2,%1,%0 fdiv%.d %2,%1,%0 frdiv%.d %1,%2,%0”)

(define_insn “divsf3” [(set (match_operand:SF 0 “register_operand” “=f,f,f”) (div:SF (match_operand:SF 1 “nonimmediate_operand” “f,f,m”) (match_operand:SF 2 “nonimmediate_operand” “f,m,f”)))] “TARGET_CE” “@ fdiv%.s %2,%1,%0 fdiv%.s %2,%1,%0 frdiv%.s %1,%2,%0”)  ;; Remainder instructions.

(define_insn “modhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (mod:HI (match_operand:HI 1 “general_operand” “0”) (match_operand:HI 2 “general_operand” “dmn”)))] "" “extl %0;divs %2,%0;swap %0”)

(define_insn “modhisi3” [(set (match_operand:HI 0 “general_operand” “=d”) (truncate:HI (mod:SI (match_operand:SI 1 “general_operand” “0”) (sign_extend:SI (match_operand:HI 2 “nonimmediate_operand” “dm”)))))] "" “divs %2,%0;swap %0”)

(define_insn "" [(set (match_operand:HI 0 “general_operand” “=d”) (truncate:HI (mod:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “const_int_operand” “n”))))] "" “divs %2,%0;swap %0”)

(define_insn “umodhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (umod:HI (match_operand:HI 1 “general_operand” “0”) (match_operand:HI 2 “general_operand” “dmn”)))] "" “and%.l %#0xFFFF,%0;divu %2,%0;swap %0”)

(define_insn “umodhisi3” [(set (match_operand:HI 0 “general_operand” “=d”) (truncate:HI (umod:SI (match_operand:SI 1 “general_operand” “0”) (zero_extend:SI (match_operand:HI 2 “nonimmediate_operand” “dm”)))))] "" “divu %2,%0;swap %0”)

(define_insn "" [(set (match_operand:HI 0 “general_operand” “=d”) (truncate:HI (umod:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “const_int_operand” “n”))))] "" “divu %2,%0;swap %0”)

(define_insn “divmodsi4” [(set (match_operand:SI 0 “general_operand” “=d”) (div:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “general_operand” “dmsK”))) (set (match_operand:SI 3 “general_operand” “=d”) (mod:SI (match_dup 1) (match_dup 2)))] “TARGET_68020” “divs%.l %2,%0,%3”)

(define_insn “udivmodsi4” [(set (match_operand:SI 0 “general_operand” “=d”) (udiv:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “general_operand” “dmsK”))) (set (match_operand:SI 3 “general_operand” “=d”) (umod:SI (match_dup 1) (match_dup 2)))] “TARGET_68020” “divu%.l %2,%0,%3”)  ;; logical-and instructions

(define_insn “andsi3” [(set (match_operand:SI 0 “general_operand” “=m,d”) (and:SI (match_operand:SI 1 “general_operand” “%0,0”) (match_operand:SI 2 “general_operand” “dKs,dmKs”)))] "" “* { if (GET_CODE (operands[2]) == CONST_INT && (INTVAL (operands[2]) | 0xffff) == 0xffffffff && (DATA_REG_P (operands[0]) || offsettable_memref_p (operands[0]))) { if (GET_CODE (operands[0]) != REG) operands[0] = adj_offsettable_operand (operands[0], 2); operands[2] = GEN_INT (INTVAL (operands[2]) & 0xffff); /* Do not delete a following tstl %0 insn; that would be incorrect. */ CC_STATUS_INIT; if (operands[2] == const0_rtx) return "clr%.w %0"; return "and%.w %2,%0"; } return "and%.l %2,%0"; }”)

(define_insn “andhi3” [(set (match_operand:HI 0 “general_operand” “=m,d”) (and:HI (match_operand:HI 1 “general_operand” “%0,0”) (match_operand:HI 2 “general_operand” “dn,dmn”)))] "" “and%.w %2,%0”)

(define_insn “andqi3” [(set (match_operand:QI 0 “general_operand” “=m,d”) (and:QI (match_operand:QI 1 “general_operand” “%0,0”) (match_operand:QI 2 “general_operand” “dn,dmn”)))] "" “and%.b %2,%0”)

 ;; inclusive-or instructions

(define_insn “iorsi3” [(set (match_operand:SI 0 “general_operand” “=m,d”) (ior:SI (match_operand:SI 1 “general_operand” “%0,0”) (match_operand:SI 2 “general_operand” “dKs,dmKs”)))] "" “* { register int logval; if (GET_CODE (operands[2]) == CONST_INT && INTVAL (operands[2]) >> 16 == 0 && (DATA_REG_P (operands[0]) || offsettable_memref_p (operands[0]))) { if (GET_CODE (operands[0]) != REG) operands[0] = adj_offsettable_operand (operands[0], 2); /* Do not delete a following tstl %0 insn; that would be incorrect. */ CC_STATUS_INIT; return "or%.w %2,%0"; } if (GET_CODE (operands[2]) == CONST_INT && (logval = exact_log2 (INTVAL (operands[2]))) >= 0 && (DATA_REG_P (operands[0]) || offsettable_memref_p (operands[0]))) { if (DATA_REG_P (operands[0])) operands[1] = GEN_INT (logval); else { operands[0] = adj_offsettable_operand (operands[0], 3 - (logval / 8)); operands[1] = GEN_INT (logval % 8); } return "bset %1,%0"; } return "or%.l %2,%0"; }”)

(define_insn “iorhi3” [(set (match_operand:HI 0 “general_operand” “=m,d”) (ior:HI (match_operand:HI 1 “general_operand” “%0,0”) (match_operand:HI 2 “general_operand” “dn,dmn”)))] "" “or%.w %2,%0”)

(define_insn “iorqi3” [(set (match_operand:QI 0 “general_operand” “=m,d”) (ior:QI (match_operand:QI 1 “general_operand” “%0,0”) (match_operand:QI 2 “general_operand” “dn,dmn”)))] "" “or%.b %2,%0”)  ;; xor instructions

(define_insn “xorsi3” [(set (match_operand:SI 0 “general_operand” “=do,m”) (xor:SI (match_operand:SI 1 “general_operand” “%0,0”) (match_operand:SI 2 “general_operand” “di,dKs”)))] "" “* { if (GET_CODE (operands[2]) == CONST_INT && INTVAL (operands[2]) >> 16 == 0 && (offsettable_memref_p (operands[0]) || DATA_REG_P (operands[0]))) { if (! DATA_REG_P (operands[0])) operands[0] = adj_offsettable_operand (operands[0], 2); /* Do not delete a following tstl %0 insn; that would be incorrect. */ CC_STATUS_INIT; return "eor%.w %2,%0"; } return "eor%.l %2,%0"; }”)

(define_insn “xorhi3” [(set (match_operand:HI 0 “general_operand” “=dm”) (xor:HI (match_operand:HI 1 “general_operand” “%0”) (match_operand:HI 2 “general_operand” “dn”)))] "" “eor%.w %2,%0”)

(define_insn “xorqi3” [(set (match_operand:QI 0 “general_operand” “=dm”) (xor:QI (match_operand:QI 1 “general_operand” “%0”) (match_operand:QI 2 “general_operand” “dn”)))] "" “eor%.b %2,%0”)  ;; negation instructions

(define_insn “negsi2” [(set (match_operand:SI 0 “general_operand” “=dm”) (neg:SI (match_operand:SI 1 “general_operand” “0”)))] "" “neg%.l %0”)

(define_insn “neghi2” [(set (match_operand:HI 0 “general_operand” “=dm”) (neg:HI (match_operand:HI 1 “general_operand” “0”)))] "" “neg%.w %0”)

(define_insn “negqi2” [(set (match_operand:QI 0 “general_operand” “=dm”) (neg:QI (match_operand:QI 1 “general_operand” “0”)))] "" “neg%.b %0”)

(define_insn “negsf2” [(set (match_operand:SF 0 “register_operand” “=f”) (neg:SF (match_operand:SF 1 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fneg%.s %1,%0”)

(define_insn “negdf2” [(set (match_operand:DF 0 “register_operand” “=f”) (neg:DF (match_operand:DF 1 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fneg%.d %1,%0”)  ;; Absolute value instructions

(define_insn “abssf2” [(set (match_operand:SF 0 “register_operand” “=f”) (abs:SF (match_operand:SF 1 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fabs%.s %1,%0”)

(define_insn “absdf2” [(set (match_operand:DF 0 “register_operand” “=f”) (abs:DF (match_operand:DF 1 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fabs%.d %1,%0”)  ;; Square root instructions

(define_insn “sqrtsf2” [(set (match_operand:SF 0 “register_operand” “=f”) (sqrt:SF (match_operand:SF 1 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fsqrt%.s %1,%0”)

(define_insn “sqrtdf2” [(set (match_operand:DF 0 “register_operand” “=f”) (sqrt:DF (match_operand:DF 1 “nonimmediate_operand” “fm”)))] “TARGET_CE” “fsqrt%.d %1,%0”)  ;; one complement instructions

(define_insn “one_cmplsi2” [(set (match_operand:SI 0 “general_operand” “=dm”) (not:SI (match_operand:SI 1 “general_operand” “0”)))] "" “not%.l %0”)

(define_insn “one_cmplhi2” [(set (match_operand:HI 0 “general_operand” “=dm”) (not:HI (match_operand:HI 1 “general_operand” “0”)))] "" “not%.w %0”)

(define_insn “one_cmplqi2” [(set (match_operand:QI 0 “general_operand” “=dm”) (not:QI (match_operand:QI 1 “general_operand” “0”)))] "" “not%.b %0”)   ;; arithmetic shift instructions ;; We don't need the shift memory by 1 bit instruction

(define_insn “ashlsi3” [(set (match_operand:SI 0 “general_operand” “=d”) (ashift:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “general_operand” “dI”)))] "" “asl%.l %2,%0”)

(define_insn “ashlhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (ashift:HI (match_operand:HI 1 “general_operand” “0”) (match_operand:HI 2 “general_operand” “dI”)))] "" “asl%.w %2,%0”)

(define_insn “ashlqi3” [(set (match_operand:QI 0 “general_operand” “=d”) (ashift:QI (match_operand:QI 1 “general_operand” “0”) (match_operand:QI 2 “general_operand” “dI”)))] "" “asl%.b %2,%0”)

(define_insn “ashrsi3” [(set (match_operand:SI 0 “general_operand” “=d”) (ashiftrt:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “general_operand” “dI”)))] "" “asr%.l %2,%0”)

(define_insn “ashrhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (ashiftrt:HI (match_operand:HI 1 “general_operand” “0”) (match_operand:HI 2 “general_operand” “dI”)))] "" “asr%.w %2,%0”)

(define_insn “ashrqi3” [(set (match_operand:QI 0 “general_operand” “=d”) (ashiftrt:QI (match_operand:QI 1 “general_operand” “0”) (match_operand:QI 2 “general_operand” “dI”)))] "" “asr%.b %2,%0”)  ;; logical shift instructions

(define_insn “lshrsi3” [(set (match_operand:SI 0 “general_operand” “=d”) (lshiftrt:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “general_operand” “dI”)))] "" “lsr%.l %2,%0”)

(define_insn “lshrhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (lshiftrt:HI (match_operand:HI 1 “general_operand” “0”) (match_operand:HI 2 “general_operand” “dI”)))] "" “lsr%.w %2,%0”)

(define_insn “lshrqi3” [(set (match_operand:QI 0 “general_operand” “=d”) (lshiftrt:QI (match_operand:QI 1 “general_operand” “0”) (match_operand:QI 2 “general_operand” “dI”)))] "" “lsr%.b %2,%0”)  ;; rotate instructions

(define_insn “rotlsi3” [(set (match_operand:SI 0 “general_operand” “=d”) (rotate:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “general_operand” “dI”)))] "" “rol%.l %2,%0”)

(define_insn “rotlhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (rotate:HI (match_operand:HI 1 “general_operand” “0”) (match_operand:HI 2 “general_operand” “dI”)))] "" “rol%.w %2,%0”)

(define_insn “rotlqi3” [(set (match_operand:QI 0 “general_operand” “=d”) (rotate:QI (match_operand:QI 1 “general_operand” “0”) (match_operand:QI 2 “general_operand” “dI”)))] "" “rol%.b %2,%0”)

(define_insn “rotrsi3” [(set (match_operand:SI 0 “general_operand” “=d”) (rotatert:SI (match_operand:SI 1 “general_operand” “0”) (match_operand:SI 2 “general_operand” “dI”)))] "" “ror%.l %2,%0”)

(define_insn “rotrhi3” [(set (match_operand:HI 0 “general_operand” “=d”) (rotatert:HI (match_operand:HI 1 “general_operand” “0”) (match_operand:HI 2 “general_operand” “dI”)))] "" “ror%.w %2,%0”)

(define_insn “rotrqi3” [(set (match_operand:QI 0 “general_operand” “=d”) (rotatert:QI (match_operand:QI 1 “general_operand” “0”) (match_operand:QI 2 “general_operand” “dI”)))] "" “ror%.b %2,%0”)  ;; Special cases of bit-field insns which we should ;; recognize in preference to the general case. ;; These handle aligned 8-bit and 16-bit fields, ;; which can usually be done with move instructions.

(define_insn "" [(set (zero_extract:SI (match_operand:SI 0 “register_operand” “+do”) (match_operand:SI 1 “const_int_operand” “i”) (match_operand:SI 2 “const_int_operand” “i”)) (match_operand:SI 3 “general_operand” “d”))] “TARGET_68020 && TARGET_BITFIELD && (INTVAL (operands[1]) == 8 || INTVAL (operands[1]) == 16) && INTVAL (operands[2]) % INTVAL (operands[1]) == 0 && (GET_CODE (operands[0]) == REG || ! mode_dependent_address_p (XEXP (operands[0], 0)))” "* { if (REG_P (operands[0])) { if (INTVAL (operands[1]) + INTVAL (operands[2]) != 32) return "bfins %3,[%c2,%c1]%0"; } else operands[0] = adj_offsettable_operand (operands[0], INTVAL (operands[2]) / 8);

if (GET_CODE (operands[3]) == MEM) operands[3] = adj_offsettable_operand (operands[3], (32 - INTVAL (operands[1])) / 8); if (INTVAL (operands[1]) == 8) return "mov%.b %3,%0"; return "mov%.w %3,%0"; }")

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=&d”) (zero_extract:SI (match_operand:SI 1 “register_operand” “do”) (match_operand:SI 2 “const_int_operand” “i”) (match_operand:SI 3 “const_int_operand” “i”)))] “TARGET_68020 && TARGET_BITFIELD && (INTVAL (operands[2]) == 8 || INTVAL (operands[2]) == 16) && INTVAL (operands[3]) % INTVAL (operands[2]) == 0 && (GET_CODE (operands[1]) == REG || ! mode_dependent_address_p (XEXP (operands[1], 0)))” "* { if (REG_P (operands[1])) { if (INTVAL (operands[2]) + INTVAL (operands[3]) != 32) return "bfextu [%c3,%c2]%1,%0"; } else operands[1] = adj_offsettable_operand (operands[1], INTVAL (operands[3]) / 8);

output_asm_insn ("clrl %0", operands); if (GET_CODE (operands[0]) == MEM) operands[0] = adj_offsettable_operand (operands[0], (32 - INTVAL (operands[1])) / 8); if (INTVAL (operands[2]) == 8) return "mov%.b %1,%0"; return "mov%.w %1,%0"; }")

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=d”) (sign_extract:SI (match_operand:SI 1 “register_operand” “do”) (match_operand:SI 2 “const_int_operand” “i”) (match_operand:SI 3 “const_int_operand” “i”)))] “TARGET_68020 && TARGET_BITFIELD && (INTVAL (operands[2]) == 8 || INTVAL (operands[2]) == 16) && INTVAL (operands[3]) % INTVAL (operands[2]) == 0 && (GET_CODE (operands[1]) == REG || ! mode_dependent_address_p (XEXP (operands[1], 0)))” "* { if (REG_P (operands[1])) { if (INTVAL (operands[2]) + INTVAL (operands[3]) != 32) return "bfexts [%c3,%c2]%1,%0"; } else operands[1] = adj_offsettable_operand (operands[1], INTVAL (operands[3]) / 8);

if (INTVAL (operands[2]) == 8) return "mov%.b %1,%0;extb%.l %0"; return "mov%.w %1,%0;ext%.l %0"; }")  ;; Bit field instructions, general cases. ;; “o,d” constraint causes a nonoffsettable memref to match the “o” ;; so that its address is reloaded.

(define_expand “extv” [(set (match_operand:SI 0 “general_operand” "") (sign_extract:SI (match_operand:SI 1 “general_operand” "") (match_operand:SI 2 “general_operand” "") (match_operand:SI 3 “general_operand” "")))] “TARGET_68020 && TARGET_BITFIELD” "")

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=d”) (sign_extract:SI (match_operand:QI 1 “memory_operand” “o”) (match_operand:SI 2 “general_operand” “di”) (match_operand:SI 3 “general_operand” “di”)))] “TARGET_68020 && TARGET_BITFIELD” “bfexts [%c3,%c2]%1,%0”)

(define_expand “extzv” [(set (match_operand:SI 0 “general_operand” "") (zero_extract:SI (match_operand:SI 1 “general_operand” "") (match_operand:SI 2 “general_operand” "") (match_operand:SI 3 “general_operand” "")))] “TARGET_68020 && TARGET_BITFIELD” "")

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=d”) (zero_extract:SI (match_operand:QI 1 “memory_operand” “o”) (match_operand:SI 2 “general_operand” “di”) (match_operand:SI 3 “general_operand” “di”)))] “TARGET_68020 && TARGET_BITFIELD” “bfextu [%c3,%c2]%1,%0”)

(define_insn "" [(set (zero_extract:SI (match_operand:QI 0 “memory_operand” “+o”) (match_operand:SI 1 “general_operand” “di”) (match_operand:SI 2 “general_operand” “di”)) (xor:SI (zero_extract:SI (match_dup 0) (match_dup 1) (match_dup 2)) (match_operand:SI 3 “const_int_operand” “i,i”)))] “TARGET_68020 && TARGET_BITFIELD && (INTVAL (operands[3]) == -1 || (GET_CODE (operands[1]) == CONST_INT && (~ INTVAL (operands[3]) & ((1 << INTVAL (operands[1]))- 1)) == 0))” “* { CC_STATUS_INIT; return "bfchg [%c2,%c1]%0"; }”)

(define_insn "" [(set (zero_extract:SI (match_operand:QI 0 “memory_operand” “+o”) (match_operand:SI 1 “general_operand” “di”) (match_operand:SI 2 “general_operand” “di”)) (const_int 0))] “TARGET_68020 && TARGET_BITFIELD” “* { CC_STATUS_INIT; return "bfclr [%c2,%c1]%0"; }”)

(define_insn "" [(set (zero_extract:SI (match_operand:QI 0 “memory_operand” “+o”) (match_operand:SI 1 “general_operand” “di”) (match_operand:SI 2 “general_operand” “di”)) (const_int -1))] “TARGET_68020 && TARGET_BITFIELD” “* { CC_STATUS_INIT; return "bfset [%c2,%c1]%0"; }”)

(define_expand “insv” [(set (zero_extract:SI (match_operand:SI 0 “general_operand” "") (match_operand:SI 1 “general_operand” "") (match_operand:SI 2 “general_operand” "")) (match_operand:SI 3 “general_operand” ""))] “TARGET_68020 && TARGET_BITFIELD” "")

(define_insn "" [(set (zero_extract:SI (match_operand:QI 0 “memory_operand” “+o”) (match_operand:SI 1 “general_operand” “di”) (match_operand:SI 2 “general_operand” “di”)) (match_operand:SI 3 “general_operand” “d”))] “TARGET_68020 && TARGET_BITFIELD” “bfins %3,[%c2,%c1]%0”)

;; Now recognize bit field insns that operate on registers ;; (or at least were intended to do so).

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=d”) (sign_extract:SI (match_operand:SI 1 “register_operand” “d”) (match_operand:SI 2 “general_operand” “di”) (match_operand:SI 3 “general_operand” “di”)))] “TARGET_68020 && TARGET_BITFIELD” “bfexts [%c3,%c2]%1,%0”)

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=d”) (zero_extract:SI (match_operand:SI 1 “register_operand” “d”) (match_operand:SI 2 “general_operand” “di”) (match_operand:SI 3 “general_operand” “di”)))] “TARGET_68020 && TARGET_BITFIELD” “bfextu [%c3,%c2]%1,%0”)

(define_insn "" [(set (zero_extract:SI (match_operand:SI 0 “register_operand” “+d”) (match_operand:SI 1 “general_operand” “di”) (match_operand:SI 2 “general_operand” “di”)) (const_int 0))] “TARGET_68020 && TARGET_BITFIELD” “* { CC_STATUS_INIT; return "bfclr [%c2,%c1]%0"; }”)

(define_insn "" [(set (zero_extract:SI (match_operand:SI 0 “register_operand” “+d”) (match_operand:SI 1 “general_operand” “di”) (match_operand:SI 2 “general_operand” “di”)) (const_int -1))] “TARGET_68020 && TARGET_BITFIELD” “* { CC_STATUS_INIT; return "bfset [%c2,%c1]%0"; }”)

(define_insn "" [(set (zero_extract:SI (match_operand:SI 0 “register_operand” “+d”) (match_operand:SI 1 “general_operand” “di”) (match_operand:SI 2 “general_operand” “di”)) (match_operand:SI 3 “general_operand” “d”))] “TARGET_68020 && TARGET_BITFIELD” “* { return "bfins %3,[%c2,%c1]%0"; }”)  ;; Special patterns for optimizing bit-field instructions.

(define_insn "" [(set (cc0) (zero_extract:SI (match_operand:QI 0 “memory_operand” “o”) (match_operand:SI 1 “const_int_operand” “i”) (match_operand:SI 2 “general_operand” “di”)))] “TARGET_68020 && TARGET_BITFIELD” “* { if (operands[1] == const1_rtx && GET_CODE (operands[2]) == CONST_INT) {
int width = GET_CODE (operands[0]) == REG ? 31 : 7; return output_btst (operands, GEN_INT (width - INTVAL (operands[2])), operands[0], insn, 1000); /* Pass 1000 as SIGNPOS argument so that btst will not think we are testing the sign bit for an `and' and assume that nonzero implies a negative result. */ } if (INTVAL (operands[1]) != 32) cc_status.flags = CC_NOT_NEGATIVE; return "bftst [%c2,%c1]%0"; }”)

;;; now handle the register cases (define_insn "" [(set (cc0) (zero_extract:SI (match_operand:SI 0 “register_operand” “d”) (match_operand:SI 1 “const_int_operand” “i”) (match_operand:SI 2 “general_operand” “di”)))] “TARGET_68020 && TARGET_BITFIELD” “* { if (operands[1] == const1_rtx && GET_CODE (operands[2]) == CONST_INT) {
int width = GET_CODE (operands[0]) == REG ? 31 : 7; return output_btst (operands, GEN_INT (width - INTVAL (operands[2])), operands[0], insn, 1000); /* Pass 1000 as SIGNPOS argument so that btst will not think we are testing the sign bit for an `and' and assume that nonzero implies a negative result. */ } if (INTVAL (operands[1]) != 32) cc_status.flags = CC_NOT_NEGATIVE; return "bftst [%c2,%c1]%0"; }”)

 (define_insn “seq” [(set (match_operand:QI 0 “general_operand” “=d”) (eq:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; OUTPUT_JUMP ("seq %0", "fseq %0", "seq %0"); ")

(define_insn “sne” [(set (match_operand:QI 0 “general_operand” “=d”) (ne:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; OUTPUT_JUMP ("sne %0", "fsneq %0", "sne %0"); ")

(define_insn “sgt” [(set (match_operand:QI 0 “general_operand” “=d”) (gt:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; OUTPUT_JUMP ("sgt %0", "fsgt %0", "and%.b %#0xc,%!;sgt %0"); ")

(define_insn “sgtu” [(set (match_operand:QI 0 “general_operand” “=d”) (gtu:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; return "shi %0"; ")

(define_insn “slt” [(set (match_operand:QI 0 “general_operand” “=d”) (lt:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; OUTPUT_JUMP ("slt %0", "fslt %0", "smi %0"); ")

(define_insn “sltu” [(set (match_operand:QI 0 “general_operand” “=d”) (ltu:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; return "scs %0"; ")

(define_insn “sge” [(set (match_operand:QI 0 “general_operand” “=d”) (ge:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; OUTPUT_JUMP ("sge %0", "fsge %0", "spl %0"); ")

(define_insn “sgeu” [(set (match_operand:QI 0 “general_operand” “=d”) (geu:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; return "scc %0"; ")

(define_insn “sle” [(set (match_operand:QI 0 “general_operand” “=d”) (le:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; OUTPUT_JUMP ("sle %0", "fsle %0", "and%.b %#0xc,%!;sle %0"); ")

(define_insn “sleu” [(set (match_operand:QI 0 “general_operand” “=d”) (leu:QI (cc0) (const_int 0)))] "" "* cc_status = cc_prev_status; return "sls %0"; ")  ;; Basic conditional jump instructions.

(define_insn “beq” [(set (pc) (if_then_else (eq (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “* { OUTPUT_JUMP ("jeq %l0", "fbeq %l0", "jeq %l0"); }”)

(define_insn “bne” [(set (pc) (if_then_else (ne (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “* { OUTPUT_JUMP ("jne %l0", "fbneq %l0", "jne %l0"); }”)

(define_insn “bgt” [(set (pc) (if_then_else (gt (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" "* OUTPUT_JUMP ("jgt %l0", "fbgt %l0", "and%.b %#0xc,%!;jgt %l0"); ")

(define_insn “bgtu” [(set (pc) (if_then_else (gtu (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" "* return "jhi %l0"; ")

(define_insn “blt” [(set (pc) (if_then_else (lt (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" "* OUTPUT_JUMP ("jlt %l0", "fblt %l0", "jmi %l0"); ")

(define_insn “bltu” [(set (pc) (if_then_else (ltu (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" "* return "jcs %l0"; ")

(define_insn “bge” [(set (pc) (if_then_else (ge (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" "* OUTPUT_JUMP ("jge %l0", "fbge %l0", "jpl %l0"); ")

(define_insn “bgeu” [(set (pc) (if_then_else (geu (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" "* return "jcc %l0"; ")

(define_insn “ble” [(set (pc) (if_then_else (le (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" "* OUTPUT_JUMP ("jle %l0", "fble %l0", "and%.b %#0xc,%!;jle %l0"); ")

(define_insn “bleu” [(set (pc) (if_then_else (leu (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" "* return "jls %l0"; ")  ;; Negated conditional jump instructions.

(define_insn "" [(set (pc) (if_then_else (eq (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “* { OUTPUT_JUMP ("jne %l0", "fbneq %l0", "jne %l0"); }”)

(define_insn "" [(set (pc) (if_then_else (ne (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “* { OUTPUT_JUMP ("jeq %l0", "fbeq %l0", "jeq %l0"); }”)

(define_insn "" [(set (pc) (if_then_else (gt (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" "* OUTPUT_JUMP ("jle %l0", "fbngt %l0", "and%.b %#0xc,%!;jle %l0"); ")

(define_insn "" [(set (pc) (if_then_else (gtu (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" "* return "jls %l0"; ")

(define_insn "" [(set (pc) (if_then_else (lt (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" "* OUTPUT_JUMP ("jge %l0", "fbnlt %l0", "jpl %l0"); ")

(define_insn "" [(set (pc) (if_then_else (ltu (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" "* return "jcc %l0"; ")

(define_insn "" [(set (pc) (if_then_else (ge (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" "* OUTPUT_JUMP ("jlt %l0", "fbnge %l0", "jmi %l0"); ")

(define_insn "" [(set (pc) (if_then_else (geu (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" "* return "jcs %l0"; ")

(define_insn "" [(set (pc) (if_then_else (le (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" "* OUTPUT_JUMP ("jgt %l0", "fbnle %l0", "and%.b %#0xc,%!;jgt %l0"); ")

(define_insn "" [(set (pc) (if_then_else (leu (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" "* return "jhi %l0"; ")  ;; Subroutines of “casesi”.

(define_expand “casesi_1” [(set (match_operand:SI 3 “general_operand” "") (plus:SI (match_operand:SI 0 “general_operand” "") ;; Note operand 1 has been negated! (match_operand:SI 1 “immediate_operand” ""))) (set (cc0) (compare (match_operand:SI 2 “nonimmediate_operand” "") (match_dup 3))) (set (pc) (if_then_else (ltu (cc0) (const_int 0)) (label_ref (match_operand 4 "" "")) (pc)))] "" "")

(define_expand “casesi_2” [(set (match_operand:HI 0 "" "") (mem:HI (match_operand:SI 1 "" ""))) ;; The USE here is so that at least one jump-insn will refer to the label, ;; to keep it alive in jump_optimize. (parallel [(set (pc) (plus:SI (pc) (sign_extend:SI (match_dup 0)))) (use (label_ref (match_operand 2 "" "")))])] "" "")

;; Operand 0 is index (in bytes); operand 1 is minimum, operand 2 the maximum; ;; operand 3 is CODE_LABEL for the table; ;; operand 4 is the CODE_LABEL to go to if index out of range. (define_expand “casesi” ;; We don't use these for generating the RTL, but we must describe ;; the operands here. [(match_operand:HI 0 “general_operand” "") (match_operand:SI 1 “immediate_operand” "") (match_operand:SI 2 “general_operand” "") (match_operand 3 "" "") (match_operand 4 "" "")] "" " { rtx table_elt_addr; rtx index_diff;

operands[1] = negate_rtx (SImode, operands[1]); index_diff = gen_reg_rtx (SImode); /* Emit the first few insns. / emit_insn (gen_casesi_1 (operands[0], operands[1], operands[2], index_diff, operands[4])); / Construct a memory address. This may emit some insns. / table_elt_addr = memory_address_noforce (HImode, gen_rtx (PLUS, Pmode, gen_rtx (MULT, Pmode, index_diff, GEN_INT (2)), gen_rtx (LABEL_REF, VOIDmode, operands[3]))); / Emit the last few insns. */ emit_insn (gen_casesi_2 (gen_reg_rtx (HImode), table_elt_addr, operands[3])); DONE; }")

;; Recognize one of the insns resulting from casesi_2. (define_insn "" [(set (pc) (plus:SI (pc) (sign_extend:SI (match_operand:HI 0 “general_operand” “r”)))) (use (label_ref (match_operand 1 "" "")))] "" "* return "jmp pc@(2:B)[%0:W:B]"; ")  ;; Unconditional and other jump instructions (define_insn “jump” [(set (pc) (label_ref (match_operand 0 "" "")))] "" "* return "jra %l0"; ")

(define_insn "" [(set (pc) (if_then_else (ne (match_operand:HI 0 “general_operand” “d,m,g”) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (set (match_dup 0) (plus:HI (match_dup 0) (const_int -1)))] "" “@ dbra %0,%l1 subq%.w %#1,%0;jcc %l1 subq%.w %#1,%0;cmp%.w %#-1,%0;jne %l1”)

(define_insn "" [(set (pc) (if_then_else (ne (match_operand:SI 0 “general_operand” “d,m,g”) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1)))] "" “@ dbra %0,%l1;clr%.w %0;subq%.l %#1,%0;jcc %l1 subq%.l %#1,%0;jcc %l1 subq%.l %#1,%0;cmp%.l %#-1,%0;jne %l1”)

;; dbra patterns that use REG_NOTES info generated by strength_reduce.

(define_expand “decrement_and_branch_until_zero” [(parallel [(set (pc) (if_then_else (ge (match_operand:SI 0 “general_operand” "") (const_int 1)) (label_ref (match_operand 1 "" "")) (pc))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1)))])] "" "")

(define_insn "" [(set (pc) (if_then_else (ge (match_operand:SI 0 “general_operand” “d,m,g”) (const_int 1)) (label_ref (match_operand 1 "" "")) (pc))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1)))] “find_reg_note (insn, REG_NONNEG, 0)” “@ dbra %0,%l1;clrw %0;subql %#1,%0;jcc %l1 subq%.l %#1,%0;jcc %l1 subq%.l %#1,%0;cmp%.l %#-1,%0;jne %l1”)

;; Call subroutine with no return value. (define_insn “call” [(call (match_operand:QI 0 “memory_operand” “o”) (match_operand:SI 1 “general_operand” “g”))] "" "* { rtx xoperands[2]; int size = XINT(operands[1],0);

if (size == 0) output_asm_insn ("sub%.l a0,a0;jbsr %0", operands); else { xoperands[1] = GEN_INT (size/4); output_asm_insn ("mov%.l sp,a0;pea %a1", xoperands); output_asm_insn ("jbsr %0", operands); size = size + 4; xoperands[1] = GEN_INT (size); if (size <= 8) output_asm_insn ("addq%.l %1,sp", xoperands); else if (size < 0x8000) output_asm_insn ("add%.w %1,sp", xoperands); else output_asm_insn ("add%.l %1,sp", xoperands); } return "mov%.l a6@(-4),a0"; }")

;; Call subroutine, returning value in operand 0 ;; (which must be a hard register). (define_insn “call_value” [(set (match_operand 0 "" “=rf”) (call (match_operand:QI 1 “memory_operand” “o”) (match_operand:SI 2 “general_operand” “g”)))] "" "* { rtx xoperands[3]; int size = XINT(operands[2],0);

if (size == 0) output_asm_insn("sub%.l a0,a0;jbsr %1", operands); else { xoperands[2] = GEN_INT (size/4); output_asm_insn ("mov%.l sp,a0;pea %a2", xoperands); output_asm_insn ("jbsr %1", operands); size = size + 4; xoperands[2] = GEN_INT (size); if (size <= 8) output_asm_insn ("addq%.l %2,sp", xoperands); else if (size < 0x8000) output_asm_insn ("add%.w %2,sp", xoperands); else output_asm_insn ("add%.l %2,sp", xoperands); } return "mov%.l a6@(-4),a0"; }")

;; Call subroutine returning any type.

(define_expand “untyped_call” [(parallel [(call (match_operand 0 "" "") (const_int 0)) (match_operand 1 "" "") (match_operand 2 "" "")])] "" " { int i;

emit_call_insn (gen_call (operands[0], const0_rtx, NULL, const0_rtx));

for (i = 0; i < XVECLEN (operands[2], 0); i++) { rtx set = XVECEXP (operands[2], 0, i); emit_move_insn (SET_DEST (set), SET_SRC (set)); }

/* The optimizer does not know that the call sets the function value registers we stored in the result block. We avoid problems by claiming that all hard registers are used and clobbered at this point. */ emit_insn (gen_blockage ());

DONE; }")

;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and ;; all of memory. This blocks insns from being moved across this point.

(define_insn “blockage” [(unspec_volatile [(const_int 0)] 0)] "" "")

(define_insn “nop” [(const_int 0)] "" “nop”)  ;; This should not be used unless the add/sub insns can't be.

(define_insn "" [(set (match_operand:SI 0 “general_operand” “=a”) (match_operand:QI 1 “address_operand” “p”))] "" “lea %a1,%0”)  ;; This is the first machine-dependent peephole optimization. ;; It is useful when a floating value is returned from a function call ;; and then is moved into an FP register. ;; But it is mainly intended to test the support for these optimizations.

;Not applicable to Alliant -- floating results are returned in fp0 ;(define_peephole ; [(set (reg:SI 15) (plus:SI (reg:SI 15) (const_int 4))) ; (set (match_operand:DF 0 “register_operand” “f”) ; (match_operand:DF 1 “register_operand” “ad”))] ; “FP_REG_P (operands[0]) && ! FP_REG_P (operands[1])” ; “* ;{ ; rtx xoperands[2]; ; xoperands[1] = gen_rtx (REG, SImode, REGNO (operands[1]) + 1); ; output_asm_insn ("mov%.l %1,%@", xoperands); ; output_asm_insn ("mov%.l %1,%-", operands); ; return "fmove%.d %+,%0"; ;} ;”)