#!/bin/sh
# Submit a problem report to a GNATS site.
# Copyright (C) 1993, 2000, 2001 Free Software Foundation, Inc.
# Contributed by Brendan Kehoe (brendan@cygnus.com), based on a
# version written by Heinz G. Seidl (hgs@cygnus.com).
#
# This file is part of GNU GNATS.
#
# GNU GNATS is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# GNU GNATS is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU GNATS; see the file COPYING.  If not, write to
# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

# The version of this send-pr.
VERSION=3.113

# The submitter-id for your site.
SUBMITTER=net

# The default mail address for PR submissions. 
GNATS_ADDR=gcc-gnats@gcc.gnu.org

# The default release for this host.
DEFAULT_RELEASE="@gcc_version_full@"

# The default organization.
DEFAULT_ORGANIZATION=

# What mailer to use.  This must come after the config file, since it is
# host-dependent.
# Copied from cvsbug
if [ -f /usr/sbin/sendmail ]; then  
    MAIL_AGENT="/usr/sbin/sendmail -oi -t"
else  
    MAIL_AGENT="/usr/lib/sendmail -oi -t"
fi
MAILER=`echo $MAIL_AGENT | sed -e 's, .*,,'`
if [ ! -f "$MAILER" ] ; then
    echo "$COMMAND: Cannot file mail program \"$MAILER\"."
    echo "$COMMAND: Please fix the MAIL_AGENT entry in the $COMMAND file."
    exit 1
fi


# How to read the passwd database.
PASSWD="cat /etc/passwd"

ECHON=bsd

if [ $ECHON = bsd ] ; then
  ECHON1="echo -n"
  ECHON2=
elif [ $ECHON = sysv ] ; then
  ECHON1=echo
  ECHON2='\c'
else
  ECHON1=echo
  ECHON2=
fi

#

if [ -z "$TMPDIR" ]; then
  TMPDIR=/tmp
else
  if [ "`echo $TMPDIR | grep '/$'`" != "" ]; then
    TMPDIR="`echo $TMPDIR | sed -e 's,/$,,'`"
  fi
fi

if [ @have_mktemp_command@ = yes ]; then
	TEMP0=`mktemp $TMPDIR/poXXXXXX` || exit 1
	TEMP=`mktemp $TMPDIR/pXXXXXX` || exit 1
	BAD=`mktemp $TMPDIR/pbadXXXXXX` || exit 1
	REF=`mktemp $TMPDIR/pfXXXXXX` || exit 1
else
	TEMP0=$TMPDIR/po$$
	TEMP=$TMPDIR/p$$
	BAD=$TMPDIR/pbad$$
	REF=$TMPDIR/pf$$
	# set -C _may_ use O_EXCL, but it need not.
	set -C
	bad_temp=0
	: > $TEMP0 || bad_temp=1
	: > $TEMP || bad_temp=1
	: > $BAD || bad_temp=1
	: > $REF || bad_temp=1
	if [ $bad_temp = 1 ]; then
		rm -f $TEMP0 $TEMP $BAD $REF
		exit 1;
	fi
	set +C
fi
REMOVE_TEMP="rm -f $TEMP0 $TEMP $BAD $REF"

# find a user name
if [ "$LOGNAME" = "" ]; then
	if [ "$USER" != "" ]; then
		LOGNAME="$USER"
	else
		LOGNAME="UNKNOWN"
	fi
fi

FROM="$LOGNAME"
REPLY_TO="${REPLY_TO:-${REPLYTO:-$LOGNAME}}"

# Find out the name of the originator of this PR.
if [ -n "$NAME" ]; then
  ORIGINATOR="$NAME"
elif [ -f $HOME/.fullname ]; then
  ORIGINATOR="`sed -e '1q' $HOME/.fullname`"
else
  # Must use temp file due to incompatibilities in quoting behavior
  # and to protect shell metacharacters in the expansion of $LOGNAME
  $PASSWD | grep "^$LOGNAME:" | awk -F: '{print $5}' | sed -e 's/,.*//' > $TEMP0
  ORIGINATOR="`cat $TEMP0`"
  rm -f $TEMP0
fi

if [ -n "$ORGANIZATION" ]; then
  if [ -f "$ORGANIZATION" ]; then
    ORGANIZATION="`cat $ORGANIZATION`"
  fi
else
  if [ -n "$DEFAULT_ORGANIZATION" ]; then
    ORGANIZATION="$DEFAULT_ORGANIZATION"
  elif [ -f $HOME/.organization ]; then
    ORGANIZATION="`cat $HOME/.organization`"
  fi
fi

# If they don't have a preferred editor set, then use
if [ -z "$VISUAL" ]; then
  if [ -z "$EDITOR" ]; then
    EDIT=vi
  else
    EDIT="$EDITOR"
  fi
else
  EDIT="$VISUAL"
fi

# Find out some information.
SYSTEM=`( [ -f /bin/uname ] && /bin/uname -a ) || \
        ( [ -f /usr/bin/uname ] && /usr/bin/uname -a ) || echo ""`
ARCH=`[ -f /bin/arch ] && /bin/arch`
MACHINE=`[ -f /bin/machine ] && /bin/machine`

COMMAND=`echo $0 | sed -e 's,.*/,,'`
USAGE="Usage: $COMMAND [-PVL] [-t address] [-f filename] [-s severity]
       [-c address] [--request-id] [--version]"
REMOVE=
BATCH=
CC=
SEVERITY_C=

while [ $# -gt 0 ]; do
  case "$1" in
    -r) ;; 		# Ignore for backward compat.
    -t | --to) if [ $# -eq 1 ]; then echo "$USAGE"; $REMOVE_TEMP; exit 1; fi
	shift ; GNATS_ADDR="$1"
	EXPLICIT_GNATS_ADDR=true
        ;;
    -f | --file) if [ $# -eq 1 ]; then echo "$USAGE"; $REMOVE_TEMP; exit 1; fi
	shift ; IN_FILE="$1"
	if [ "$IN_FILE" != "-" -a ! -r "$IN_FILE" ]; then
	  echo "$COMMAND: cannot read $IN_FILE"
	  $REMOVE_TEMP
	  exit 1
	fi
	;;
    -b | --batch) BATCH=true ;;
    -c | --cc) if [ $# -eq 1 ]; then echo "$USAGE"; $REMOVE_TEMP; exit 1; fi
	shift ; CC="$1"
	;;
    -s | --severity) if [ $# -eq 1 ]; then echo "$USAGE"; $REMOVE_TEMP; exit 1; fi
	shift ; SEVERITY_C="$1"
	;;
    -p | -P | --print) PRINT=true ;;
    -L | --list) FORMAT=norm ;;
    -l | -CL | --lisp) FORMAT=lisp ;;
    --request-id) REQUEST_ID=true ;;
    -h | --help) echo "$USAGE"; $REMOVE_TEMP; exit 0 ;;
    -V | --version) echo "$VERSION"; $REMOVE_TEMP; exit 0 ;;
    -*) echo "$USAGE" ; $REMOVE_TEMP; exit 1 ;;
    *) echo "$USAGE" ; $REMOVE_TEMP; exit 1
 esac
 shift
done

# spam does not need to be listed here
CATEGORIES="c++ c debug fortran java libf2c libgcj libobjc libstdc++ middle-end objc optimization other preprocessor target web"

case "$FORMAT" in
  lisp) echo "$CATEGORIES" | \
        awk 'BEGIN {printf "( "} {printf "(\"%s\") ",$0} END {printf ")\n"}'
	$REMOVE_TEMP
        exit 0
        ;;
  norm) l=`echo "$CATEGORIES" | \
	awk 'BEGIN {max = 0; } { if (length($0) > max) { max = length($0); } }
	     END {print max + 1;}'`
	c=`expr 70 / $l`
	if [ $c -eq 0 ]; then c=1; fi
	echo "$CATEGORIES" | \
        awk 'BEGIN {print "Known categories:"; i = 0 }
          { printf ("%-'$l'.'$l's", $0); if ((++i % '$c') == 0) { print "" } }
            END { print ""; }'
	$REMOVE_TEMP
        exit 0
        ;;
esac

ORIGINATOR_C='<name of the PR author (one line)>'
ORGANIZATION_C='<organization of PR author (multiple lines)>'
SYNOPSIS_C='<synopsis of the problem (one line)>'
if [ -z "$SEVERITY_C" ]; then
  SEVERITY_C='<[ non-critical | serious | critical ] (one line)>'
fi
PRIORITY_C='<[ low | medium ] (one line)>'
CATEGORY_C='<choose from the top of this file (one line)>'
RELEASE_C='<release number or tag (one line)>'
ENVIRONMENT_C='<machine, os, target, libraries (multiple lines)>'
DESCRIPTION_C='<precise description of the problem (multiple lines)>'
HOW_TO_REPEAT_C='<When reporting a compiler error, preprocessor output must be included>'
FIX_C='<how to correct or work around the problem, if known (multiple lines)>'

# Catch some signals. ($xs kludge needed by Sun /bin/sh)
xs=0
trap '$REMOVE_TEMP; exit $xs' 0
trap 'echo "$COMMAND: Aborting ..."; $REMOVE_TEMP; xs=1; exit' 1 3 13 15

# If they told us to use a specific file, then do so.
if [ -n "$IN_FILE" ]; then
  if [ "$IN_FILE" = "-" ]; then
    # The PR is coming from the standard input.
    if [ -n "$EXPLICIT_GNATS_ADDR" ]; then
      sed -e "s;^[Tt][Oo]:.*;To: $GNATS_ADDR;" > $TEMP
    else
      cat > $TEMP
    fi
  else
    # Use the file they named.
    if [ -n "$EXPLICIT_GNATS_ADDR" ]; then
      sed -e "s;^[Tt][Oo]:.*;To: $GNATS_ADDR;" $IN_FILE > $TEMP
    else
      cat $IN_FILE > $TEMP
    fi
  fi
else

  if [ -n "$PR_FORM" -a -z "$PRINT_INTERN" ]; then
    # If their PR_FORM points to a bogus entry, then bail.
    if [ ! -f "$PR_FORM" -o ! -r "$PR_FORM" -o ! -s "$PR_FORM" ]; then
      echo "$COMMAND: can't seem to read your template file (\`$PR_FORM'), ignoring PR_FORM"
      sleep 1
      PRINT_INTERN=bad_prform
    fi
  fi

  if [ -n "$PR_FORM" -a -z "$PRINT_INTERN" ]; then
    cp $PR_FORM $TEMP || 
      ( echo "$COMMAND: could not copy $PR_FORM" ; xs=1; exit )
  else
    for file in $TEMP $REF ; do
      cat  > $file << '__EOF__'
SEND-PR: -*- send-pr -*-
SEND-PR: Lines starting with `SEND-PR' will be removed automatically, as
SEND-PR: will all comments (text enclosed in `<' and `>').
SEND-PR: 
SEND-PR: Please consult the GCC manual if you are not sure how to
SEND-PR: fill out a problem report.
SEND-PR: Note that the Synopsis field is mandatory.  The Subject (for
SEND-PR: the mail) will be made the same as Synopsis unless explicitly
SEND-PR: changed.
SEND-PR:
SEND-PR: Choose from the following categories:
SEND-PR:
__EOF__

      # Format the categories so they fit onto lines.
	l=`echo "$CATEGORIES" | \
	awk 'BEGIN {max = 0; } { if (length($0) > max) { max = length($0); } }
	     END {print max + 1;}'`
	c=`expr 61 / $l`
	if [ $c -eq 0 ]; then c=1; fi
	echo "$CATEGORIES" | \
        awk 'BEGIN {printf "SEND-PR: "; i = 0 }
          { printf ("%-'$l'.'$l's", $0);
	    if ((++i % '$c') == 0) { printf "\nSEND-PR: " } }
            END { printf "\nSEND-PR:\n"; }' >> $file

      cat >> $file << __EOF__
To: $GNATS_ADDR
Subject: 
From: $FROM
Reply-To: $REPLYTO
Cc: $CC
X-send-pr-version: $VERSION
X-GNATS-Notify: 


>Submitter-Id:	$SUBMITTER
>Originator:	$ORIGINATOR
>Organization:	${ORGANIZATION-$ORGANIZATION_C}
>Confidential:	no
SEND-PR: Leave "Confidential" as "no"; all GCC PRs are public.
>Synopsis:	$SYNOPSIS_C
>Severity:	$SEVERITY_C
SEND-PR: critical     GCC is completely not operational; no work-around known.
SEND-PR: serious      GCC is not working properly; a work-around is possible.
SEND-PR: non-critical Report indicates minor problem.
>Priority:	$PRIORITY_C
SEND-PR: medium       The problem should be solved in the next release.
SEND-PR: low          The problem should be solve in a future release.
>Category:	$CATEGORY_C
>Class:		<[ doc-bug | accepts-illegal | rejects-legal | wrong-code | ice-on-legal-code| ice-on-illegal-code | pessimizes-code | sw-bug | change-request | support ] (one line)>
SEND-PR: doc-bug          The doumentation is incorrect.
SEND-PR: accepts-illegal  GCC fails to reject erroneous code.
SEND-PR: rejects-legal    GCC gives an error message for correct code.
SEND-PR: wrong-code       The machine code generated by gcc is incorrect.
SEND-PR: ice-on-legal-code   GCC gives an Internal Compiler Error (ICE)
SEND-PR:                     for correct code
SEND-PR: ice-on-illegal-code GCC gives an ICE instead of reporting an error
SEND-PR: pessimizes-code     GCC misses an important optimization opportunity
SEND-PR: sw-bug              Software bug of some other class than above
SEND-PR: change-request      A feature in GCC is missing.
SEND-PR: support             I need help with gcc.
>Release:	${DEFAULT_RELEASE-$RELEASE_C}
>Environment:
`[ -n "$SYSTEM" ] && echo System: $SYSTEM`
`[ -n "$ARCH" ] && echo Architecture: $ARCH`
`[ -n "$MACHINE" ] && echo Machine: $MACHINE`
	$ENVIRONMENT_C
host: @host@
build: @build@
target: @target@
configured with: @gcc_config_arguments@
>Description:
	$DESCRIPTION_C
>How-To-Repeat:
	$HOW_TO_REPEAT_C
>Fix:
	$FIX_C
__EOF__
    done
  fi

  if [ "$PRINT" = true -o "$PRINT_INTERN" = true ]; then
    cat $TEMP
    xs=0; exit
  fi

  chmod u+w $TEMP
  if [ -z "$REQUEST_ID" ]; then
    eval $EDIT $TEMP
  else
    ed -s $TEMP << '__EOF__'
/^Subject/s/^Subject:.*/Subject: request for a customer id/
/^>Category/s/^>Category:.*/>Category: send-pr/
w
q
__EOF__
  fi

  if cmp -s $REF $TEMP ; then
    echo "$COMMAND: problem report not filled out, therefore not sent"
    xs=1; exit
  fi
fi

#
#	Check the enumeration fields

# This is a "sed-subroutine" with one keyword parameter 
# (with workaround for Sun sed bug)
#
SED_CMD='
/$PATTERN/{
s|||
s|<.*>||
s|^[ 	]*||
s|[ 	]*$||
p
q
}'


while [ -z "$REQUEST_ID" ]; do
  CNT=0

  # 1) Confidential
  #
  PATTERN=">Confidential:"
  CONFIDENTIAL=`eval sed -n -e "\"$SED_CMD\"" $TEMP`
  case "$CONFIDENTIAL" in
    no) CNT=`expr $CNT + 1` ;;
    *) echo "$COMMAND: \`$CONFIDENTIAL' is not a valid value for \`Confidential'." ;;
  esac
  #
  # 2) Severity
  #
  PATTERN=">Severity:"
  SEVERITY=`eval sed -n -e "\"$SED_CMD\"" $TEMP`
  case "$SEVERITY" in
    ""|non-critical|serious|critical) CNT=`expr $CNT + 1` ;;
    *)  echo "$COMMAND: \`$SEVERITY' is not a valid value for \`Severity'."
  esac
  #
  # 3) Priority
  #
  PATTERN=">Priority:"
  PRIORITY=`eval sed -n -e "\"$SED_CMD\"" $TEMP`
  case "$PRIORITY" in
    ""|low|medium) CNT=`expr $CNT + 1` ;;
    high) echo "$COMMAND: \`Priority: high' is reserved for GCC maintainers." ;;
    *)  echo "$COMMAND: \`$PRIORITY' is not a valid value for \`Priority'."
  esac
  #
  # 4) Category
  #
  PATTERN=">Category:"
  CATEGORY=`eval sed -n -e "\"$SED_CMD\"" $TEMP`
  FOUND=
  for C in $CATEGORIES
  do
    if [ "$C" = "$CATEGORY" ]; then FOUND=true ; break ; fi
  done
  if [ -n "$FOUND" ]; then
    CNT=`expr $CNT + 1`	
  else
    if [ -z "$CATEGORY" ]; then
      echo "$COMMAND: you must include a Category: field in your report."
    else
      echo "$COMMAND: \`$CATEGORY' is not a known category."
    fi
  fi
  #
  # 5) Class
  #
  PATTERN=">Class:"
  CLASS=`eval sed -n -e "\"$SED_CMD\"" $TEMP`
  case "$CLASS" in
    ""|doc-bug|accepts-illegal|rejects-legal|wrong-code|ice-on-legal-code|ice-on-illegal-code|pessimizes-code|sw-bug|change-request|support) CNT=`expr $CNT + 1` ;;
    *)  echo "$COMMAND: \`$CLASS' is not a valid value for \`Class'."
  esac
  #
  # 6) Check that synopsis is not empty
  #
  if grep "^>Synopsis:[ 	]*${SYNOPSIS_C}\$" $TEMP > /dev/null
  then
    echo "$COMMAND: Synopsis must not be empty."
  else
    CNT=`expr $CNT + 1`
  fi

  [ $CNT -lt 6 -a -z "$BATCH" ] && 
    echo "Errors were found with the problem report."

  while true; do
    if [ -z "$BATCH" ]; then
      $ECHON1 "a)bort, e)dit or s)end? $ECHON2"
      read input
    else
      if [ $CNT -eq 6 ]; then
        input=s
      else
        input=a
      fi
    fi
    case "$input" in
      a*)
	if [ -z "$BATCH" ]; then
	  echo "$COMMAND: the problem report remains in $BAD and is not sent."
	  REMOVE_TEMP="rm -f $TEMP0 $TEMP $REF"
	  mv $TEMP $BAD
        else
	  echo "$COMMAND: the problem report is not sent."
	fi
	xs=1; exit
	;;
      e*)
        eval $EDIT $TEMP
	continue 2
	;;
      s*)
	break 2
	;;
    esac
  done
done

#
# Make sure the mail has got a Subject.  If not, use the same as
# in Synopsis.
#

if grep '^Subject:[ 	]*$' $TEMP > /dev/null
then
  SYNOPSIS=`grep '^>Synopsis:' $TEMP | sed -e 's/^>Synopsis:[ 	]*//'`
  ed -s $TEMP << __EOF__
/^Subject:/s/:.*\$/: $SYNOPSIS/
w
q
__EOF__
fi

#
#	Remove comments and send the problem report
#	(we have to use patterns, where the comment contains regex chars)
#
# /^>Originator:/s;$ORIGINATOR;;
sed  -e "
/^SEND-PR:/d
/^>Organization:/,/^>[A-Za-z-]*:/s;$ORGANIZATION_C;;
/^>Confidential:/s;<.*>;;
/^>Synopsis:/s;$SYNOPSIS_C;;
/^>Severity:/s;<.*>;;
/^>Priority:/s;<.*>;;
/^>Category:/s;$CATEGORY_C;;
/^>Class:/s;<.*>;;
/^>Release:/,/^>[A-Za-z-]*:/s;$RELEASE_C;;
/^>Environment:/,/^>[A-Za-z-]*:/s;$ENVIRONMENT_C;;
/^>Description:/,/^>[A-Za-z-]*:/s;$DESCRIPTION_C;;
/^>How-To-Repeat:/,/^>[A-Za-z-]*:/s;$HOW_TO_REPEAT_C;;
/^>Fix:/,/^>[A-Za-z-]*:/s;$FIX_C;;
" $TEMP > $REF

if $MAIL_AGENT < $REF; then
  echo "$COMMAND: problem report sent"
  xs=0; exit
else
  echo "$COMMAND: mysterious mail failure."
  if [ -z "$BATCH" ]; then
    echo "$COMMAND: the problem report remains in $BAD and is not sent."
    REMOVE_TEMP="rm -f $TEMP0 $TEMP $REF"
    mv $REF $BAD
  else
    echo "$COMMAND: the problem report is not sent."
  fi
  xs=1; exit
fi