blob: 08d2a7ee34c08fc515287360c502c8ec0c9d06b4 [file] [log] [blame]
------------------------------------------------------------------------------
-- --
-- GNU ADA RUN-TIME LIBRARY (GNARL) COMPONENTS --
-- --
-- S Y S T E M . T A S K _ P R I M I T I V E S . O P E R A T I O N S --
-- --
-- B o d y --
-- --
-- $Revision: 1.1 $
-- --
-- Copyright (C) 1991-2001, Florida State University --
-- --
-- GNARL is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
-- ware Foundation; either version 2, or (at your option) any later ver- --
-- sion. GNARL is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
-- Public License distributed with GNARL; see file COPYING. If not, write --
-- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, --
-- MA 02111-1307, USA. --
-- --
-- As a special exception, if other files instantiate generics from this --
-- unit, or you link this unit with other files to produce an executable, --
-- this unit does not by itself cause the resulting executable to be --
-- covered by the GNU General Public License. This exception does not --
-- however invalidate any other reasons why the executable file might be --
-- covered by the GNU Public License. --
-- --
-- GNARL was developed by the GNARL team at Florida State University. It is --
-- now maintained by Ada Core Technologies Inc. in cooperation with Florida --
-- State University (http://www.gnat.com). --
-- --
------------------------------------------------------------------------------
-- This is a HP-UX version of this package
-- This package contains all the GNULL primitives that interface directly
-- with the underlying OS.
pragma Polling (Off);
-- Turn off polling, we do not want ATC polling to take place during
-- tasking operations. It causes infinite loops and other problems.
with System.Tasking.Debug;
-- used for Known_Tasks
with Interfaces.C;
-- used for int
-- size_t
with System.Interrupt_Management;
-- used for Keep_Unmasked
-- Abort_Task_Interrupt
-- Interrupt_ID
with System.Interrupt_Management.Operations;
-- used for Set_Interrupt_Mask
-- All_Tasks_Mask
pragma Elaborate_All (System.Interrupt_Management.Operations);
with System.Parameters;
-- used for Size_Type
with System.Task_Primitives.Interrupt_Operations;
-- used for Get_Interrupt_ID
with System.Tasking;
-- used for Ada_Task_Control_Block
-- Task_ID
with System.Soft_Links;
-- used for Defer/Undefer_Abort
-- Note that we do not use System.Tasking.Initialization directly since
-- this is a higher level package that we shouldn't depend on. For example
-- when using the restricted run time, it is replaced by
-- System.Tasking.Restricted.Initialization
with System.OS_Primitives;
-- used for Delay_Modes
with Unchecked_Conversion;
with Unchecked_Deallocation;
package body System.Task_Primitives.Operations is
use System.Tasking.Debug;
use System.Tasking;
use Interfaces.C;
use System.OS_Interface;
use System.Parameters;
use System.OS_Primitives;
package PIO renames System.Task_Primitives.Interrupt_Operations;
package SSL renames System.Soft_Links;
------------------
-- Local Data --
------------------
-- The followings are logically constants, but need to be initialized
-- at run time.
ATCB_Key : aliased pthread_key_t;
-- Key used to find the Ada Task_ID associated with a thread
All_Tasks_L : aliased System.Task_Primitives.RTS_Lock;
-- See comments on locking rules in System.Tasking (spec).
Environment_Task_ID : Task_ID;
-- A variable to hold Task_ID for the environment task.
Unblocked_Signal_Mask : aliased sigset_t;
-- The set of signals that should unblocked in all tasks
Time_Slice_Val : Integer;
pragma Import (C, Time_Slice_Val, "__gl_time_slice_val");
Locking_Policy : Character;
pragma Import (C, Locking_Policy, "__gl_locking_policy");
Dispatching_Policy : Character;
pragma Import (C, Dispatching_Policy, "__gl_task_dispatching_policy");
FIFO_Within_Priorities : constant Boolean := Dispatching_Policy = 'F';
-- Indicates whether FIFO_Within_Priorities is set.
-- The followings are internal configuration constants needed.
-----------------------
-- Local Subprograms --
-----------------------
procedure Abort_Handler (Sig : Signal);
function To_Task_ID is new Unchecked_Conversion (System.Address, Task_ID);
function To_Address is new Unchecked_Conversion (Task_ID, System.Address);
-------------------
-- Abort_Handler --
-------------------
-- Target-dependent binding of inter-thread Abort signal to
-- the raising of the Abort_Signal exception.
-- The technical issues and alternatives here are essentially
-- the same as for raising exceptions in response to other
-- signals (e.g. Storage_Error). See code and comments in
-- the package body System.Interrupt_Management.
-- Some implementations may not allow an exception to be propagated
-- out of a handler, and others might leave the signal or
-- interrupt that invoked this handler masked after the exceptional
-- return to the application code.
-- GNAT exceptions are originally implemented using setjmp()/longjmp().
-- On most UNIX systems, this will allow transfer out of a signal handler,
-- which is usually the only mechanism available for implementing
-- asynchronous handlers of this kind. However, some
-- systems do not restore the signal mask on longjmp(), leaving the
-- abort signal masked.
-- Alternative solutions include:
-- 1. Change the PC saved in the system-dependent Context
-- parameter to point to code that raises the exception.
-- Normal return from this handler will then raise
-- the exception after the mask and other system state has
-- been restored (see example below).
-- 2. Use siglongjmp()/sigsetjmp() to implement exceptions.
-- 3. Unmask the signal in the Abortion_Signal exception handler
-- (in the RTS).
-- The following procedure would be needed if we can't lonjmp out of
-- a signal handler. (See below.)
-- procedure Raise_Abort_Signal is
-- begin
-- raise Standard'Abort_Signal;
-- end if;
procedure Abort_Handler (Sig : Signal) is
Self_Id : constant Task_ID := Self;
Result : Interfaces.C.int;
Old_Set : aliased sigset_t;
begin
-- Assuming it is safe to longjmp out of a signal handler, the
-- following code can be used:
if Self_Id.Deferral_Level = 0
and then Self_Id.Pending_ATC_Level < Self_Id.ATC_Nesting_Level and then
not Self_Id.Aborting
then
Self_Id.Aborting := True;
-- Make sure signals used for RTS internal purpose are unmasked
Result := pthread_sigmask (SIG_UNBLOCK,
Unblocked_Signal_Mask'Unchecked_Access, Old_Set'Unchecked_Access);
pragma Assert (Result = 0);
raise Standard'Abort_Signal;
end if;
-- Otherwise, something like this is required:
-- if not Abort_Is_Deferred.all then
-- -- Overwrite the return PC address with the address of the
-- -- special raise routine, and "return" to that routine's
-- -- starting address.
-- Context.PC := Raise_Abort_Signal'Address;
-- return;
-- end if;
end Abort_Handler;
-----------------
-- Stack_Guard --
-----------------
-- The underlying thread system sets a guard page at the
-- bottom of a thread stack, so nothing is needed.
-- ??? Check the comment above
procedure Stack_Guard (T : ST.Task_ID; On : Boolean) is
begin
null;
end Stack_Guard;
-------------------
-- Get_Thread_Id --
-------------------
function Get_Thread_Id (T : ST.Task_ID) return OSI.Thread_Id is
begin
return T.Common.LL.Thread;
end Get_Thread_Id;
----------
-- Self --
----------
function Self return Task_ID is
Result : System.Address;
begin
Result := pthread_getspecific (ATCB_Key);
pragma Assert (Result /= System.Null_Address);
return To_Task_ID (Result);
end Self;
---------------------
-- Initialize_Lock --
---------------------
-- Note: mutexes and cond_variables needed per-task basis are
-- initialized in Initialize_TCB and the Storage_Error is
-- handled. Other mutexes (such as All_Tasks_Lock, Memory_Lock...)
-- used in RTS is initialized before any status change of RTS.
-- Therefore rasing Storage_Error in the following routines
-- should be able to be handled safely.
procedure Initialize_Lock
(Prio : System.Any_Priority;
L : access Lock)
is
Attributes : aliased pthread_mutexattr_t;
Result : Interfaces.C.int;
begin
Result := pthread_mutexattr_init (Attributes'Access);
pragma Assert (Result = 0 or else Result = ENOMEM);
if Result = ENOMEM then
raise Storage_Error;
end if;
L.Priority := Prio;
Result := pthread_mutex_init (L.L'Access, Attributes'Access);
pragma Assert (Result = 0 or else Result = ENOMEM);
if Result = ENOMEM then
raise Storage_Error;
end if;
Result := pthread_mutexattr_destroy (Attributes'Access);
pragma Assert (Result = 0);
end Initialize_Lock;
procedure Initialize_Lock (L : access RTS_Lock; Level : Lock_Level) is
Attributes : aliased pthread_mutexattr_t;
Result : Interfaces.C.int;
begin
Result := pthread_mutexattr_init (Attributes'Access);
pragma Assert (Result = 0 or else Result = ENOMEM);
if Result = ENOMEM then
raise Storage_Error;
end if;
Result := pthread_mutex_init (L, Attributes'Access);
pragma Assert (Result = 0 or else Result = ENOMEM);
if Result = ENOMEM then
raise Storage_Error;
end if;
Result := pthread_mutexattr_destroy (Attributes'Access);
pragma Assert (Result = 0);
end Initialize_Lock;
-------------------
-- Finalize_Lock --
-------------------
procedure Finalize_Lock (L : access Lock) is
Result : Interfaces.C.int;
begin
Result := pthread_mutex_destroy (L.L'Access);
pragma Assert (Result = 0);
end Finalize_Lock;
procedure Finalize_Lock (L : access RTS_Lock) is
Result : Interfaces.C.int;
begin
Result := pthread_mutex_destroy (L);
pragma Assert (Result = 0);
end Finalize_Lock;
----------------
-- Write_Lock --
----------------
procedure Write_Lock (L : access Lock; Ceiling_Violation : out Boolean) is
Result : Interfaces.C.int;
begin
L.Owner_Priority := Get_Priority (Self);
if L.Priority < L.Owner_Priority then
Ceiling_Violation := True;
return;
end if;
Result := pthread_mutex_lock (L.L'Access);
pragma Assert (Result = 0);
Ceiling_Violation := False;
end Write_Lock;
procedure Write_Lock (L : access RTS_Lock) is
Result : Interfaces.C.int;
begin
Result := pthread_mutex_lock (L);
pragma Assert (Result = 0);
end Write_Lock;
procedure Write_Lock (T : Task_ID) is
Result : Interfaces.C.int;
begin
Result := pthread_mutex_lock (T.Common.LL.L'Access);
pragma Assert (Result = 0);
end Write_Lock;
---------------
-- Read_Lock --
---------------
procedure Read_Lock (L : access Lock; Ceiling_Violation : out Boolean) is
begin
Write_Lock (L, Ceiling_Violation);
end Read_Lock;
------------
-- Unlock --
------------
procedure Unlock (L : access Lock) is
Result : Interfaces.C.int;
begin
Result := pthread_mutex_unlock (L.L'Access);
pragma Assert (Result = 0);
end Unlock;
procedure Unlock (L : access RTS_Lock) is
Result : Interfaces.C.int;
begin
Result := pthread_mutex_unlock (L);
pragma Assert (Result = 0);
end Unlock;
procedure Unlock (T : Task_ID) is
Result : Interfaces.C.int;
begin
Result := pthread_mutex_unlock (T.Common.LL.L'Access);
pragma Assert (Result = 0);
end Unlock;
-------------
-- Sleep --
-------------
procedure Sleep (Self_ID : Task_ID;
Reason : System.Tasking.Task_States) is
Result : Interfaces.C.int;
begin
pragma Assert (Self_ID = Self);
Result := pthread_cond_wait (Self_ID.Common.LL.CV'Access,
Self_ID.Common.LL.L'Access);
-- EINTR is not considered a failure.
pragma Assert (Result = 0 or else Result = EINTR);
end Sleep;
-----------------
-- Timed_Sleep --
-----------------
-- This is for use within the run-time system, so abort is
-- assumed to be already deferred, and the caller should be
-- holding its own ATCB lock.
procedure Timed_Sleep
(Self_ID : Task_ID;
Time : Duration;
Mode : ST.Delay_Modes;
Reason : System.Tasking.Task_States;
Timedout : out Boolean;
Yielded : out Boolean)
is
Check_Time : constant Duration := Monotonic_Clock;
Abs_Time : Duration;
Request : aliased timespec;
Result : Interfaces.C.int;
begin
Timedout := True;
Yielded := False;
if Mode = Relative then
Abs_Time := Duration'Min (Time, Max_Sensible_Delay) + Check_Time;
else
Abs_Time := Duration'Min (Check_Time + Max_Sensible_Delay, Time);
end if;
if Abs_Time > Check_Time then
Request := To_Timespec (Abs_Time);
loop
exit when Self_ID.Pending_ATC_Level < Self_ID.ATC_Nesting_Level
or else Self_ID.Pending_Priority_Change;
Result := pthread_cond_timedwait
(Self_ID.Common.LL.CV'Access, Self_ID.Common.LL.L'Access,
Request'Access);
exit when Abs_Time <= Monotonic_Clock;
if Result = 0 or Result = EINTR then
-- somebody may have called Wakeup for us
Timedout := False;
exit;
end if;
pragma Assert (Result = ETIMEDOUT);
end loop;
end if;
end Timed_Sleep;
-----------------
-- Timed_Delay --
-----------------
-- This is for use in implementing delay statements, so
-- we assume the caller is abort-deferred but is holding
-- no locks.
procedure Timed_Delay
(Self_ID : Task_ID;
Time : Duration;
Mode : ST.Delay_Modes)
is
Check_Time : constant Duration := Monotonic_Clock;
Abs_Time : Duration;
Request : aliased timespec;
Result : Interfaces.C.int;
begin
-- Only the little window between deferring abort and
-- locking Self_ID is the reason we need to
-- check for pending abort and priority change below! :(
SSL.Abort_Defer.all;
Write_Lock (Self_ID);
if Mode = Relative then
Abs_Time := Time + Check_Time;
else
Abs_Time := Duration'Min (Check_Time + Max_Sensible_Delay, Time);
end if;
if Abs_Time > Check_Time then
Request := To_Timespec (Abs_Time);
Self_ID.Common.State := Delay_Sleep;
loop
if Self_ID.Pending_Priority_Change then
Self_ID.Pending_Priority_Change := False;
Self_ID.Common.Base_Priority := Self_ID.New_Base_Priority;
Set_Priority (Self_ID, Self_ID.Common.Base_Priority);
end if;
exit when Self_ID.Pending_ATC_Level < Self_ID.ATC_Nesting_Level;
Result := pthread_cond_timedwait (Self_ID.Common.LL.CV'Access,
Self_ID.Common.LL.L'Access, Request'Access);
exit when Abs_Time <= Monotonic_Clock;
pragma Assert (Result = 0 or else
Result = ETIMEDOUT or else
Result = EINTR);
end loop;
Self_ID.Common.State := Runnable;
end if;
Unlock (Self_ID);
Result := sched_yield;
SSL.Abort_Undefer.all;
end Timed_Delay;
---------------------
-- Monotonic_Clock --
---------------------
function Monotonic_Clock return Duration is
TS : aliased timespec;
Result : Interfaces.C.int;
begin
Result := Clock_Gettime (CLOCK_REALTIME, TS'Unchecked_Access);
pragma Assert (Result = 0);
return To_Duration (TS);
end Monotonic_Clock;
-------------------
-- RT_Resolution --
-------------------
function RT_Resolution return Duration is
begin
return 10#1.0#E-6;
end RT_Resolution;
------------
-- Wakeup --
------------
procedure Wakeup (T : Task_ID; Reason : System.Tasking.Task_States) is
Result : Interfaces.C.int;
begin
Result := pthread_cond_signal (T.Common.LL.CV'Access);
pragma Assert (Result = 0);
end Wakeup;
-----------
-- Yield --
-----------
procedure Yield (Do_Yield : Boolean := True) is
Result : Interfaces.C.int;
begin
if Do_Yield then
Result := sched_yield;
end if;
end Yield;
------------------
-- Set_Priority --
------------------
type Prio_Array_Type is array (System.Any_Priority) of Integer;
pragma Atomic_Components (Prio_Array_Type);
Prio_Array : Prio_Array_Type;
-- Global array containing the id of the currently running task for
-- each priority.
--
-- Note: we assume that we are on a single processor with run-til-blocked
-- scheduling.
procedure Set_Priority
(T : Task_ID;
Prio : System.Any_Priority;
Loss_Of_Inheritance : Boolean := False)
is
Result : Interfaces.C.int;
Array_Item : Integer;
Param : aliased struct_sched_param;
begin
Param.sched_priority := Interfaces.C.int (Underlying_Priorities (Prio));
if Time_Slice_Val > 0 then
Result := pthread_setschedparam
(T.Common.LL.Thread, SCHED_RR, Param'Access);
elsif FIFO_Within_Priorities or else Time_Slice_Val = 0 then
Result := pthread_setschedparam
(T.Common.LL.Thread, SCHED_FIFO, Param'Access);
else
Result := pthread_setschedparam
(T.Common.LL.Thread, SCHED_OTHER, Param'Access);
end if;
pragma Assert (Result = 0);
if FIFO_Within_Priorities then
-- Annex D requirement [RM D.2.2 par. 9]:
-- If the task drops its priority due to the loss of inherited
-- priority, it is added at the head of the ready queue for its
-- new active priority.
if Loss_Of_Inheritance
and then Prio < T.Common.Current_Priority
then
Array_Item := Prio_Array (T.Common.Base_Priority) + 1;
Prio_Array (T.Common.Base_Priority) := Array_Item;
loop
-- Let some processes a chance to arrive
Yield;
-- Then wait for our turn to proceed
exit when Array_Item = Prio_Array (T.Common.Base_Priority)
or else Prio_Array (T.Common.Base_Priority) = 1;
end loop;
Prio_Array (T.Common.Base_Priority) :=
Prio_Array (T.Common.Base_Priority) - 1;
end if;
end if;
T.Common.Current_Priority := Prio;
end Set_Priority;
------------------
-- Get_Priority --
------------------
function Get_Priority (T : Task_ID) return System.Any_Priority is
begin
return T.Common.Current_Priority;
end Get_Priority;
----------------
-- Enter_Task --
----------------
procedure Enter_Task (Self_ID : Task_ID) is
Result : Interfaces.C.int;
begin
Self_ID.Common.LL.Thread := pthread_self;
Result := pthread_setspecific (ATCB_Key, To_Address (Self_ID));
pragma Assert (Result = 0);
Lock_All_Tasks_List;
for I in Known_Tasks'Range loop
if Known_Tasks (I) = null then
Known_Tasks (I) := Self_ID;
Self_ID.Known_Tasks_Index := I;
exit;
end if;
end loop;
Unlock_All_Tasks_List;
end Enter_Task;
--------------
-- New_ATCB --
--------------
function New_ATCB (Entry_Num : Task_Entry_Index) return Task_ID is
begin
return new Ada_Task_Control_Block (Entry_Num);
end New_ATCB;
----------------------
-- Initialize_TCB --
----------------------
procedure Initialize_TCB (Self_ID : Task_ID; Succeeded : out Boolean) is
Mutex_Attr : aliased pthread_mutexattr_t;
Result : Interfaces.C.int;
Cond_Attr : aliased pthread_condattr_t;
begin
Result := pthread_mutexattr_init (Mutex_Attr'Access);
pragma Assert (Result = 0 or else Result = ENOMEM);
if Result /= 0 then
Succeeded := False;
return;
end if;
Result := pthread_mutex_init (Self_ID.Common.LL.L'Access,
Mutex_Attr'Access);
pragma Assert (Result = 0 or else Result = ENOMEM);
if Result /= 0 then
Succeeded := False;
return;
end if;
Result := pthread_mutexattr_destroy (Mutex_Attr'Access);
pragma Assert (Result = 0);
Result := pthread_condattr_init (Cond_Attr'Access);
pragma Assert (Result = 0 or else Result = ENOMEM);
if Result /= 0 then
Result := pthread_mutex_destroy (Self_ID.Common.LL.L'Access);
pragma Assert (Result = 0);
Succeeded := False;
return;
end if;
Result := pthread_cond_init (Self_ID.Common.LL.CV'Access,
Cond_Attr'Access);
pragma Assert (Result = 0 or else Result = ENOMEM);
if Result = 0 then
Succeeded := True;
else
Result := pthread_mutex_destroy (Self_ID.Common.LL.L'Access);
pragma Assert (Result = 0);
Succeeded := False;
end if;
Result := pthread_condattr_destroy (Cond_Attr'Access);
pragma Assert (Result = 0);
end Initialize_TCB;
-----------------
-- Create_Task --
-----------------
procedure Create_Task
(T : Task_ID;
Wrapper : System.Address;
Stack_Size : System.Parameters.Size_Type;
Priority : System.Any_Priority;
Succeeded : out Boolean)
is
Attributes : aliased pthread_attr_t;
Adjusted_Stack_Size : Interfaces.C.size_t;
Result : Interfaces.C.int;
function Thread_Body_Access is new
Unchecked_Conversion (System.Address, Thread_Body);
begin
if Stack_Size = Unspecified_Size then
Adjusted_Stack_Size := Interfaces.C.size_t (Default_Stack_Size);
elsif Stack_Size < Minimum_Stack_Size then
Adjusted_Stack_Size := Interfaces.C.size_t (Minimum_Stack_Size);
else
Adjusted_Stack_Size := Interfaces.C.size_t (Stack_Size);
end if;
Result := pthread_attr_init (Attributes'Access);
pragma Assert (Result = 0 or else Result = ENOMEM);
if Result /= 0 then
Succeeded := False;
return;
end if;
Result := pthread_attr_setstacksize
(Attributes'Access, Adjusted_Stack_Size);
pragma Assert (Result = 0);
-- Since the initial signal mask of a thread is inherited from the
-- creator, and the Environment task has all its signals masked, we
-- do not need to manipulate caller's signal mask at this point.
-- All tasks in RTS will have All_Tasks_Mask initially.
Result := pthread_create
(T.Common.LL.Thread'Access,
Attributes'Access,
Thread_Body_Access (Wrapper),
To_Address (T));
pragma Assert (Result = 0 or else Result = EAGAIN);
Succeeded := Result = 0;
pthread_detach (T.Common.LL.Thread'Access);
-- Detach the thread using pthread_detach, sinc DCE threads do not have
-- pthread_attr_set_detachstate.
Result := pthread_attr_destroy (Attributes'Access);
pragma Assert (Result = 0);
Set_Priority (T, Priority);
end Create_Task;
------------------
-- Finalize_TCB --
------------------
procedure Finalize_TCB (T : Task_ID) is
Result : Interfaces.C.int;
Tmp : Task_ID := T;
procedure Free is new
Unchecked_Deallocation (Ada_Task_Control_Block, Task_ID);
begin
Result := pthread_mutex_destroy (T.Common.LL.L'Access);
pragma Assert (Result = 0);
Result := pthread_cond_destroy (T.Common.LL.CV'Access);
pragma Assert (Result = 0);
if T.Known_Tasks_Index /= -1 then
Known_Tasks (T.Known_Tasks_Index) := null;
end if;
Free (Tmp);
end Finalize_TCB;
---------------
-- Exit_Task --
---------------
procedure Exit_Task is
begin
pthread_exit (System.Null_Address);
end Exit_Task;
----------------
-- Abort_Task --
----------------
procedure Abort_Task (T : Task_ID) is
begin
--
-- Interrupt Server_Tasks may be waiting on an "event" flag (signal)
--
if T.Common.State = Interrupt_Server_Blocked_On_Event_Flag then
System.Interrupt_Management.Operations.Interrupt_Self_Process
(System.Interrupt_Management.Interrupt_ID
(PIO.Get_Interrupt_ID (T)));
end if;
end Abort_Task;
----------------
-- Check_Exit --
----------------
-- Dummy versions. The only currently working versions is for solaris
-- (native).
function Check_Exit (Self_ID : ST.Task_ID) return Boolean is
begin
return True;
end Check_Exit;
--------------------
-- Check_No_Locks --
--------------------
function Check_No_Locks (Self_ID : ST.Task_ID) return Boolean is
begin
return True;
end Check_No_Locks;
----------------------
-- Environment_Task --
----------------------
function Environment_Task return Task_ID is
begin
return Environment_Task_ID;
end Environment_Task;
-------------------------
-- Lock_All_Tasks_List --
-------------------------
procedure Lock_All_Tasks_List is
begin
Write_Lock (All_Tasks_L'Access);
end Lock_All_Tasks_List;
---------------------------
-- Unlock_All_Tasks_List --
---------------------------
procedure Unlock_All_Tasks_List is
begin
Unlock (All_Tasks_L'Access);
end Unlock_All_Tasks_List;
------------------
-- Suspend_Task --
------------------
function Suspend_Task
(T : ST.Task_ID;
Thread_Self : Thread_Id) return Boolean is
begin
return False;
end Suspend_Task;
-----------------
-- Resume_Task --
-----------------
function Resume_Task
(T : ST.Task_ID;
Thread_Self : Thread_Id) return Boolean is
begin
return False;
end Resume_Task;
----------------
-- Initialize --
----------------
procedure Initialize (Environment_Task : Task_ID) is
act : aliased struct_sigaction;
old_act : aliased struct_sigaction;
Tmp_Set : aliased sigset_t;
Result : Interfaces.C.int;
begin
Environment_Task_ID := Environment_Task;
Initialize_Lock (All_Tasks_L'Access, All_Tasks_Level);
-- Initialize the lock used to synchronize chain of all ATCBs.
Enter_Task (Environment_Task);
-- Install the abort-signal handler
act.sa_flags := 0;
act.sa_handler := Abort_Handler'Address;
Result := sigemptyset (Tmp_Set'Access);
pragma Assert (Result = 0);
act.sa_mask := Tmp_Set;
Result :=
sigaction (
Signal (System.Interrupt_Management.Abort_Task_Interrupt),
act'Unchecked_Access,
old_act'Unchecked_Access);
pragma Assert (Result = 0);
end Initialize;
procedure do_nothing (arg : System.Address);
procedure do_nothing (arg : System.Address) is
begin
null;
end do_nothing;
begin
declare
Result : Interfaces.C.int;
begin
-- NOTE: Unlike other pthread implementations, we do *not* mask all
-- signals here since we handle signals using the process-wide primitive
-- signal, rather than using sigthreadmask and sigwait. The reason of
-- this difference is that sigwait doesn't work when some critical
-- signals (SIGABRT, SIGPIPE) are masked.
Result := pthread_key_create (ATCB_Key'Access, do_nothing'Access);
pragma Assert (Result = 0);
end;
end System.Task_Primitives.Operations;