| /* Definitions of target machine for Mitsubishi D30V. |
| Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 |
| Free Software Foundation, Inc. |
| Contributed by Cygnus Solutions. |
| |
| This file is part of GNU CC. |
| |
| GNU CC is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| GNU CC is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GNU CC; see the file COPYING. If not, write to |
| the Free Software Foundation, 59 Temple Place - Suite 330, |
| Boston, MA 02111-1307, USA. */ |
| |
| #ifndef GCC_D30V_H |
| |
| /* D30V specific macros */ |
| |
| /* Align an address */ |
| #define D30V_ALIGN(addr,align) (((addr) + (align) - 1) & ~((align) - 1)) |
| |
| |
| /* Driver configuration */ |
| |
| /* Defined in svr4.h. */ |
| /* #define SWITCH_TAKES_ARG(CHAR) */ |
| |
| /* Defined in svr4.h. */ |
| /* #define WORD_SWITCH_TAKES_ARG(NAME) */ |
| |
| /* Defined in svr4.h. */ |
| #undef ASM_SPEC |
| #define ASM_SPEC "\ |
| %{!mno-asm-optimize: %{O*: %{!O0: -O} %{O0: %{masm-optimize: -O}}}} \ |
| %{v} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*}" |
| |
| /* Defined in svr4.h. */ |
| /* #define ASM_FINAL_SPEC "" */ |
| |
| /* Defined in svr4.h. */ |
| #undef LINK_SPEC |
| #define LINK_SPEC "\ |
| %{h*} %{v:-V} \ |
| %{b} %{Wl,*:%*} \ |
| %{static:-dn -Bstatic} \ |
| %{shared:-G -dy -z text} \ |
| %{symbolic:-Bsymbolic -G -dy -z text} \ |
| %{G:-G} \ |
| %{YP,*} \ |
| %{Qy:} %{!Qn:-Qy} \ |
| %{mextmem: -m d30v_e} %{mextmemory: -m d30v_e} %{monchip: -m d30v_o}" |
| |
| /* Defined in svr4.h. */ |
| #undef LIB_SPEC |
| #define LIB_SPEC "--start-group -lsim -lc --end-group" |
| |
| /* Defined in svr4.h. */ |
| #undef STARTFILE_SPEC |
| #define STARTFILE_SPEC "crt0%O%s crtbegin%O%s" |
| |
| /* Defined in svr4.h. */ |
| #undef ENDFILE_SPEC |
| #define ENDFILE_SPEC "crtend%O%s" |
| |
| /* Defined in svr4.h for host compilers. */ |
| /* #define MD_EXEC_PREFIX "" */ |
| |
| /* Defined in svr4.h for host compilers. */ |
| /* #define MD_STARTFILE_PREFIX "" */ |
| |
| |
| /* Run-time target specifications */ |
| |
| #define CPP_PREDEFINES "-D__D30V__ -Amachine=d30v" |
| |
| /* This declaration should be present. */ |
| extern int target_flags; |
| |
| #define MASK_NO_COND_MOVE 0x00000001 /* disable conditional moves */ |
| |
| #define MASK_DEBUG_ARG 0x10000000 /* debug argument handling */ |
| #define MASK_DEBUG_STACK 0x20000000 /* debug stack allocations */ |
| #define MASK_DEBUG_ADDR 0x40000000 /* debug GO_IF_LEGITIMATE_ADDRESS */ |
| |
| #define TARGET_NO_COND_MOVE (target_flags & MASK_NO_COND_MOVE) |
| #define TARGET_DEBUG_ARG (target_flags & MASK_DEBUG_ARG) |
| #define TARGET_DEBUG_STACK (target_flags & MASK_DEBUG_STACK) |
| #define TARGET_DEBUG_ADDR (target_flags & MASK_DEBUG_ADDR) |
| |
| #define TARGET_COND_MOVE (! TARGET_NO_COND_MOVE) |
| |
| /* Default switches used. */ |
| #ifndef TARGET_DEFAULT |
| #define TARGET_DEFAULT 0 |
| #endif |
| |
| #define TARGET_SWITCHES \ |
| { \ |
| { "cond-move", -MASK_NO_COND_MOVE, \ |
| N_("Enable use of conditional move instructions") }, \ |
| \ |
| { "no-cond-move", MASK_NO_COND_MOVE, \ |
| N_("Disable use of conditional move instructions") }, \ |
| \ |
| { "debug-arg", MASK_DEBUG_ARG, \ |
| N_("Debug argument support in compiler") }, \ |
| \ |
| { "debug-stack", MASK_DEBUG_STACK, \ |
| N_("Debug stack support in compiler") }, \ |
| \ |
| { "debug-addr", MASK_DEBUG_ADDR, \ |
| N_("Debug memory address support in compiler") }, \ |
| \ |
| { "asm-optimize", 0, \ |
| N_("Make adjacent short instructions parallel if possible") }, \ |
| \ |
| { "no-asm-optimize", 0, \ |
| N_("Do not make adjacent short instructions parallel") }, \ |
| \ |
| { "extmem", 0, \ |
| N_("Link programs/data to be in external memory by default") }, \ |
| \ |
| { "extmemory", 0, \ |
| N_("Link programs/data to be in external memory by default") }, \ |
| \ |
| { "onchip", 0, \ |
| N_("Link programs/data to be in onchip memory by default") }, \ |
| \ |
| { "", TARGET_DEFAULT, "" }, \ |
| } |
| |
| #define TARGET_OPTIONS \ |
| { \ |
| {"branch-cost=", &d30v_branch_cost_string, \ |
| N_("Change the branch costs within the compiler") }, \ |
| \ |
| {"cond-exec=", &d30v_cond_exec_string, \ |
| N_("Change the threshold for conversion to conditional execution") }, \ |
| } |
| |
| #define TARGET_VERSION fprintf (stderr, " d30v") |
| |
| #define OVERRIDE_OPTIONS override_options () |
| |
| #define CAN_DEBUG_WITHOUT_FP |
| |
| |
| /* Storage Layout */ |
| |
| #define BITS_BIG_ENDIAN 1 |
| |
| #define BYTES_BIG_ENDIAN 1 |
| |
| #define WORDS_BIG_ENDIAN 1 |
| |
| #define UNITS_PER_WORD 4 |
| |
| #define POINTER_SIZE 32 |
| |
| #define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \ |
| do { \ |
| if (GET_MODE_CLASS (MODE) == MODE_INT \ |
| && GET_MODE_SIZE (MODE) < 4) \ |
| (MODE) = SImode; \ |
| } while (0) |
| |
| #define PARM_BOUNDARY 32 |
| |
| #define STACK_BOUNDARY 64 |
| |
| #define FUNCTION_BOUNDARY 64 |
| |
| #define BIGGEST_ALIGNMENT 64 |
| |
| /* Defined in svr4.h. */ |
| /* #define MAX_OFILE_ALIGNMENT */ |
| |
| #define DATA_ALIGNMENT(TYPE, ALIGN) \ |
| (TREE_CODE (TYPE) == ARRAY_TYPE \ |
| && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \ |
| && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN)) |
| |
| #define CONSTANT_ALIGNMENT(EXP, ALIGN) \ |
| (TREE_CODE (EXP) == STRING_CST \ |
| && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN)) |
| |
| #define STRICT_ALIGNMENT 1 |
| |
| /* Defined in svr4.h. */ |
| |
| #define PCC_BITFIELD_TYPE_MATTERS 1 |
| |
| #define TARGET_FLOAT_FORMAT IEEE_FLOAT_FORMAT |
| |
| |
| /* Layout of Source Language Data Types */ |
| |
| #define INT_TYPE_SIZE 32 |
| |
| #define SHORT_TYPE_SIZE 16 |
| |
| #define LONG_TYPE_SIZE 32 |
| |
| #define LONG_LONG_TYPE_SIZE 64 |
| |
| #define FLOAT_TYPE_SIZE 32 |
| |
| #define DOUBLE_TYPE_SIZE 64 |
| |
| #define LONG_DOUBLE_TYPE_SIZE 64 |
| |
| #define DEFAULT_SIGNED_CHAR 1 |
| |
| /* Defined in svr4.h. */ |
| /* #define SIZE_TYPE */ |
| |
| /* Defined in svr4.h. */ |
| /* #define PTRDIFF_TYPE */ |
| |
| /* Defined in svr4.h. */ |
| /* #define WCHAR_TYPE */ |
| |
| /* Defined in svr4.h. */ |
| /* #define WCHAR_TYPE_SIZE */ |
| |
| |
| /* D30V register layout. */ |
| |
| /* Return true if a value is inside a range */ |
| #define IN_RANGE_P(VALUE, LOW, HIGH) \ |
| (((unsigned)((VALUE) - (LOW))) <= ((unsigned)((HIGH) - (LOW)))) |
| |
| /* General purpose registers. */ |
| #define GPR_FIRST 0 /* First gpr */ |
| #define GPR_LAST (GPR_FIRST + 63) /* Last gpr */ |
| #define GPR_R0 GPR_FIRST /* R0, constant 0 */ |
| #define GPR_ARG_FIRST (GPR_FIRST + 2) /* R2, first argument reg */ |
| #define GPR_ARG_LAST (GPR_FIRST + 17) /* R17, last argument reg */ |
| #define GPR_RET_VALUE GPR_ARG_FIRST /* R2, function return reg */ |
| #define GPR_ATMP_FIRST (GPR_FIRST + 20) /* R20, tmp to save accs */ |
| #define GPR_ATMP_LAST (GPR_FIRST + 21) /* R21, tmp to save accs */ |
| #define GPR_STACK_TMP (GPR_FIRST + 22) /* R22, tmp for saving stack */ |
| #define GPR_RES_FIRST (GPR_FIRST + 32) /* R32, first reserved reg */ |
| #define GPR_RES_LAST (GPR_FIRST + 35) /* R35, last reserved reg */ |
| #define GPR_FP (GPR_FIRST + 61) /* Frame pointer */ |
| #define GPR_LINK (GPR_FIRST + 62) /* Return address register */ |
| #define GPR_SP (GPR_FIRST + 63) /* Stack pointer */ |
| |
| /* Argument register that is eliminated in favor of the frame and/or stack |
| pointer. Also add register to point to where the return address is |
| stored. */ |
| #define SPECIAL_REG_FIRST (GPR_LAST + 1) |
| #define SPECIAL_REG_LAST (SPECIAL_REG_FIRST) |
| #define ARG_POINTER_REGNUM (SPECIAL_REG_FIRST + 0) |
| #define SPECIAL_REG_P(R) ((R) == SPECIAL_REG_FIRST) |
| |
| #define GPR_OR_SPECIAL_REG_P(R) IN_RANGE_P (R, GPR_FIRST, SPECIAL_REG_LAST) |
| #define GPR_P(R) IN_RANGE_P (R, GPR_FIRST, GPR_LAST) |
| #define GPR_OR_PSEUDO_P(R) (GPR_OR_SPECIAL_REG_P (R) \ |
| || (R) >= FIRST_PSEUDO_REGISTER) |
| |
| /* Flag bits. */ |
| #define FLAG_FIRST (SPECIAL_REG_LAST + 1) /* First flag */ |
| #define FLAG_LAST (FLAG_FIRST + 7) /* Last flag */ |
| #define FLAG_F0 (FLAG_FIRST) /* F0, used in prediction */ |
| #define FLAG_F1 (FLAG_FIRST + 1) /* F1, used in prediction */ |
| #define FLAG_F2 (FLAG_FIRST + 2) /* F2, general flag */ |
| #define FLAG_F3 (FLAG_FIRST + 3) /* F3, general flag */ |
| #define FLAG_SAT (FLAG_FIRST + 4) /* F4, saturation flag */ |
| #define FLAG_OVERFLOW (FLAG_FIRST + 5) /* F5, overflow flag */ |
| #define FLAG_ACC_OVER (FLAG_FIRST + 6) /* F6, accumulated overflow */ |
| #define FLAG_CARRY (FLAG_FIRST + 7) /* F7, carry/borrow flag */ |
| #define FLAG_BORROW FLAG_CARRY |
| |
| #define FLAG_P(R) IN_RANGE_P (R, FLAG_FIRST, FLAG_LAST) |
| #define FLAG_OR_PSEUDO_P(R) (FLAG_P (R) || (R) >= FIRST_PSEUDO_REGISTER) |
| |
| #define BR_FLAG_P(R) IN_RANGE_P (R, FLAG_F0, FLAG_F1) |
| #define BR_FLAG_OR_PSEUDO_P(R) (BR_FLAG_P (R) || (R) >= FIRST_PSEUDO_REGISTER) |
| |
| /* Accumulators */ |
| #define ACCUM_FIRST (FLAG_LAST + 1) /* First accumulator */ |
| #define ACCUM_A0 ACCUM_FIRST /* Register A0 */ |
| #define ACCUM_A1 (ACCUM_FIRST + 1) /* Register A1 */ |
| #define ACCUM_LAST (ACCUM_FIRST + 1) /* Last accumulator */ |
| |
| #define ACCUM_P(R) IN_RANGE_P (R, ACCUM_FIRST, ACCUM_LAST) |
| #define ACCUM_OR_PSEUDO_P(R) (ACCUM_P (R) || (R) >= FIRST_PSEUDO_REGISTER) |
| |
| /* Special registers. Note, we only define the registers that can actually |
| be used. */ |
| #define CR_FIRST (ACCUM_LAST + 1) /* First CR */ |
| #define CR_LAST (CR_FIRST + 14) /* Last CR */ |
| #define CR_PSW (CR_FIRST + 0) /* CR0, Program status word */ |
| #define CR_BPSW (CR_FIRST + 1) /* CR1, Backup PSW */ |
| #define CR_PC (CR_FIRST + 2) /* CR2, Program counter */ |
| #define CR_BPC (CR_FIRST + 3) /* CR3, Backup PC */ |
| #define CR_DPSW (CR_FIRST + 4) /* CR4, Debug PSW */ |
| #define CR_DPC (CR_FIRST + 5) /* CR5, Debug PC */ |
| #define CR_RPT_C (CR_FIRST + 6) /* CR7, loop count register */ |
| #define CR_RPT_S (CR_FIRST + 7) /* CR8, loop start address */ |
| #define CR_RPT_E (CR_FIRST + 8) /* CR9, loop end address */ |
| #define CR_MOD_S (CR_FIRST + 9) /* CR10, modulo address start*/ |
| #define CR_MOD_E (CR_FIRST + 10) /* CR11, modulo address */ |
| #define CR_IBA (CR_FIRST + 11) /* CR14, Interrupt break addr */ |
| #define CR_EIT_VB (CR_FIRST + 12) /* CR15, EIT vector address */ |
| #define CR_INT_S (CR_FIRST + 13) /* CR16, Interrupt status */ |
| #define CR_INT_M (CR_FIRST + 14) /* CR17, Interrupt mask */ |
| |
| #define CR_P(R) IN_RANGE_P (R, CR_FIRST, CR_LAST) |
| #define CR_OR_PSEUDO_P(R) (CR_P (R) || (R) >= FIRST_PSEUDO_REGISTER) |
| |
| |
| /* Register Basics */ |
| |
| /* Number of hardware registers known to the compiler. They receive numbers 0 |
| through `FIRST_PSEUDO_REGISTER-1'; thus, the first pseudo register's number |
| really is assigned the number `FIRST_PSEUDO_REGISTER'. */ |
| #define FIRST_PSEUDO_REGISTER (CR_LAST + 1) |
| |
| /* An initializer that says which registers are used for fixed purposes all |
| throughout the compiled code and are therefore not available for general |
| allocation. These would include the stack pointer, the frame pointer |
| (except on machines where that can be used as a general register when no |
| frame pointer is needed), the program counter on machines where that is |
| considered one of the addressable registers, and any other numbered register |
| with a standard use. |
| |
| This information is expressed as a sequence of numbers, separated by commas |
| and surrounded by braces. The Nth number is 1 if register N is fixed, 0 |
| otherwise. |
| |
| The table initialized from this macro, and the table initialized by the |
| following one, may be overridden at run time either automatically, by the |
| actions of the macro `CONDITIONAL_REGISTER_USAGE', or by the user with the |
| command options `-ffixed-REG', `-fcall-used-REG' and `-fcall-saved-REG'. */ |
| #define FIXED_REGISTERS \ |
| { \ |
| 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* R0 - R15 */ \ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, /* R16 - R31 */ \ |
| 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* R32 - R47 */ \ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, /* R48 - R63 */ \ |
| 1, /* ARG ptr */ \ |
| 0, 0, 0, 0, 1, 1, 1, 1, /* F0 - F7 */ \ |
| 0, 0, /* A0 - A1 */ \ |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* CRs */ \ |
| } |
| |
| /* Like `FIXED_REGISTERS' but has 1 for each register that is clobbered (in |
| general) by function calls as well as for fixed registers. This macro |
| therefore identifies the registers that are not available for general |
| allocation of values that must live across function calls. |
| |
| If a register has 0 in `CALL_USED_REGISTERS', the compiler automatically |
| saves it on function entry and restores it on function exit, if the register |
| is used within the function. */ |
| #define CALL_USED_REGISTERS \ |
| { \ |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* R0 - R15 */ \ |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* R16 - R31 */ \ |
| 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* R32 - R47 */ \ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, /* R48 - R63 */ \ |
| 1, /* ARG ptr */ \ |
| 1, 1, 1, 1, 1, 1, 1, 1, /* F0 - F7 */ \ |
| 1, 0, /* A0 - A1 */ \ |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* CRs */ \ |
| } |
| |
| /* Zero or more C statements that may conditionally modify two variables |
| `fixed_regs' and `call_used_regs' (both of type `char []') after they have |
| been initialized from the two preceding macros. |
| |
| This is necessary in case the fixed or call-clobbered registers depend on |
| target flags. |
| |
| You need not define this macro if it has no work to do. |
| |
| If the usage of an entire class of registers depends on the target flags, |
| you may indicate this to GCC by using this macro to modify `fixed_regs' and |
| `call_used_regs' to 1 for each of the registers in the classes which should |
| not be used by GCC. Also define the macro `REG_CLASS_FROM_LETTER' to return |
| `NO_REGS' if it is called with a letter for a class that shouldn't be used. |
| |
| (However, if this class is not included in `GENERAL_REGS' and all of the |
| insn patterns whose constraints permit this class are controlled by target |
| switches, then GCC will automatically avoid using these registers when the |
| target switches are opposed to them.) */ |
| /* #define CONDITIONAL_REGISTER_USAGE */ |
| |
| /* If this macro is defined and has a nonzero value, it means that `setjmp' and |
| related functions fail to save the registers, or that `longjmp' fails to |
| restore them. To compensate, the compiler avoids putting variables in |
| registers in functions that use `setjmp'. */ |
| /* #define NON_SAVING_SETJMP */ |
| |
| /* Define this macro if the target machine has register windows. This C |
| expression returns the register number as seen by the called function |
| corresponding to the register number OUT as seen by the calling function. |
| Return OUT if register number OUT is not an outbound register. */ |
| /* #define INCOMING_REGNO(OUT) */ |
| |
| /* Define this macro if the target machine has register windows. This C |
| expression returns the register number as seen by the calling function |
| corresponding to the register number IN as seen by the called function. |
| Return IN if register number IN is not an inbound register. */ |
| /* #define OUTGOING_REGNO(IN) */ |
| |
| |
| /* Order of allocation of registers */ |
| |
| /* If defined, an initializer for a vector of integers, containing the numbers |
| of hard registers in the order in which GNU CC should prefer to use them |
| (from most preferred to least). |
| |
| If this macro is not defined, registers are used lowest numbered first (all |
| else being equal). |
| |
| One use of this macro is on machines where the highest numbered registers |
| must always be saved and the save-multiple-registers instruction supports |
| only sequences of consecutive registers. On such machines, define |
| `REG_ALLOC_ORDER' to be an initializer that lists the highest numbered |
| allocatable register first. */ |
| |
| #define REG_ALLOC_ORDER \ |
| { \ |
| /* volatile registers */ \ |
| GPR_FIRST + 2, GPR_FIRST + 3, GPR_FIRST + 4, GPR_FIRST + 5, \ |
| GPR_FIRST + 6, GPR_FIRST + 7, GPR_FIRST + 8, GPR_FIRST + 9, \ |
| GPR_FIRST + 10, GPR_FIRST + 11, GPR_FIRST + 12, GPR_FIRST + 13, \ |
| GPR_FIRST + 14, GPR_FIRST + 15, GPR_FIRST + 16, GPR_FIRST + 17, \ |
| GPR_FIRST + 18, GPR_FIRST + 19, GPR_FIRST + 20, GPR_FIRST + 21, \ |
| GPR_FIRST + 22, GPR_FIRST + 23, GPR_FIRST + 24, GPR_FIRST + 25, \ |
| GPR_FIRST + 1, \ |
| \ |
| /* saved registers */ \ |
| GPR_FIRST + 34, GPR_FIRST + 35, GPR_FIRST + 36, GPR_FIRST + 37, \ |
| GPR_FIRST + 38, GPR_FIRST + 39, GPR_FIRST + 40, GPR_FIRST + 41, \ |
| GPR_FIRST + 42, GPR_FIRST + 43, GPR_FIRST + 44, GPR_FIRST + 45, \ |
| GPR_FIRST + 46, GPR_FIRST + 47, GPR_FIRST + 48, GPR_FIRST + 49, \ |
| GPR_FIRST + 50, GPR_FIRST + 51, GPR_FIRST + 52, GPR_FIRST + 53, \ |
| GPR_FIRST + 54, GPR_FIRST + 55, GPR_FIRST + 56, GPR_FIRST + 57, \ |
| GPR_FIRST + 58, GPR_FIRST + 59, GPR_FIRST + 60, GPR_FIRST + 61, \ |
| GPR_FIRST + 62, \ |
| \ |
| /* flags */ \ |
| FLAG_F2, FLAG_F3, FLAG_F0, FLAG_F1, \ |
| FLAG_SAT, FLAG_OVERFLOW, FLAG_ACC_OVER, FLAG_CARRY, \ |
| \ |
| /* accumultors */ \ |
| ACCUM_FIRST + 0, ACCUM_FIRST + 1, \ |
| \ |
| /* fixed registers */ \ |
| GPR_FIRST + 0, GPR_FIRST + 26, GPR_FIRST + 27, GPR_FIRST + 28, \ |
| GPR_FIRST + 29, GPR_FIRST + 30, GPR_FIRST + 31, GPR_FIRST + 32, \ |
| GPR_FIRST + 33, GPR_FIRST + 63, \ |
| CR_PSW, CR_BPSW, CR_PC, CR_BPC, \ |
| CR_DPSW, CR_DPC, CR_RPT_C, CR_RPT_S, \ |
| CR_RPT_E, CR_MOD_S, CR_MOD_E, CR_IBA, \ |
| CR_EIT_VB, CR_INT_S, CR_INT_M, \ |
| ARG_POINTER_REGNUM, \ |
| } |
| |
| /* A C statement (sans semicolon) to choose the order in which to allocate hard |
| registers for pseudo-registers local to a basic block. |
| |
| Store the desired register order in the array `reg_alloc_order'. Element 0 |
| should be the register to allocate first; element 1, the next register; and |
| so on. |
| |
| The macro body should not assume anything about the contents of |
| `reg_alloc_order' before execution of the macro. |
| |
| On most machines, it is not necessary to define this macro. */ |
| /* #define ORDER_REGS_FOR_LOCAL_ALLOC */ |
| |
| |
| /* How Values Fit in Registers */ |
| |
| /* A C expression for the number of consecutive hard registers, starting at |
| register number REGNO, required to hold a value of mode MODE. |
| |
| On a machine where all registers are exactly one word, a suitable definition |
| of this macro is |
| |
| #define HARD_REGNO_NREGS(REGNO, MODE) \ |
| ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) \ |
| / UNITS_PER_WORD)) */ |
| |
| #define HARD_REGNO_NREGS(REGNO, MODE) \ |
| (ACCUM_P (REGNO) ? ((GET_MODE_SIZE (MODE) + 2*UNITS_PER_WORD - 1) \ |
| / (2*UNITS_PER_WORD)) \ |
| : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) \ |
| / UNITS_PER_WORD)) |
| |
| /* A C expression that is nonzero if it is permissible to store a value of mode |
| MODE in hard register number REGNO (or in several registers starting with |
| that one). For a machine where all registers are equivalent, a suitable |
| definition is |
| |
| #define HARD_REGNO_MODE_OK(REGNO, MODE) 1 |
| |
| It is not necessary for this macro to check for the numbers of fixed |
| registers, because the allocation mechanism considers them to be always |
| occupied. |
| |
| On some machines, double-precision values must be kept in even/odd register |
| pairs. The way to implement that is to define this macro to reject odd |
| register numbers for such modes. |
| |
| The minimum requirement for a mode to be OK in a register is that the |
| `movMODE' instruction pattern support moves between the register and any |
| other hard register for which the mode is OK; and that moving a value into |
| the register and back out not alter it. |
| |
| Since the same instruction used to move `SImode' will work for all narrower |
| integer modes, it is not necessary on any machine for `HARD_REGNO_MODE_OK' |
| to distinguish between these modes, provided you define patterns `movhi', |
| etc., to take advantage of this. This is useful because of the interaction |
| between `HARD_REGNO_MODE_OK' and `MODES_TIEABLE_P'; it is very desirable for |
| all integer modes to be tieable. |
| |
| Many machines have special registers for floating point arithmetic. Often |
| people assume that floating point machine modes are allowed only in floating |
| point registers. This is not true. Any registers that can hold integers |
| can safely *hold* a floating point machine mode, whether or not floating |
| arithmetic can be done on it in those registers. Integer move instructions |
| can be used to move the values. |
| |
| On some machines, though, the converse is true: fixed-point machine modes |
| may not go in floating registers. This is true if the floating registers |
| normalize any value stored in them, because storing a non-floating value |
| there would garble it. In this case, `HARD_REGNO_MODE_OK' should reject |
| fixed-point machine modes in floating registers. But if the floating |
| registers do not automatically normalize, if you can store any bit pattern |
| in one and retrieve it unchanged without a trap, then any machine mode may |
| go in a floating register, so you can define this macro to say so. |
| |
| The primary significance of special floating registers is rather that they |
| are the registers acceptable in floating point arithmetic instructions. |
| However, this is of no concern to `HARD_REGNO_MODE_OK'. You handle it by |
| writing the proper constraints for those instructions. |
| |
| On some machines, the floating registers are especially slow to access, so |
| that it is better to store a value in a stack frame than in such a register |
| if floating point arithmetic is not being done. As long as the floating |
| registers are not in class `GENERAL_REGS', they will not be used unless some |
| pattern's constraint asks for one. */ |
| |
| extern unsigned char hard_regno_mode_ok[][FIRST_PSEUDO_REGISTER]; |
| #define HARD_REGNO_MODE_OK(REGNO, MODE) hard_regno_mode_ok[ (int)MODE ][ REGNO ] |
| |
| /* A C expression that is nonzero if it is desirable to choose register |
| allocation so as to avoid move instructions between a value of mode MODE1 |
| and a value of mode MODE2. |
| |
| If `HARD_REGNO_MODE_OK (R, MODE1)' and `HARD_REGNO_MODE_OK (R, MODE2)' are |
| ever different for any R, then `MODES_TIEABLE_P (MODE1, MODE2)' must be |
| zero. */ |
| |
| extern unsigned char modes_tieable_p[]; |
| #define MODES_TIEABLE_P(MODE1, MODE2) \ |
| modes_tieable_p[ (((int)(MODE1)) * (NUM_MACHINE_MODES)) + (int)(MODE2) ] |
| |
| /* Define this macro if the compiler should avoid copies to/from CCmode |
| registers. You should only define this macro if support fo copying to/from |
| CCmode is incomplete. */ |
| |
| /* On the D30V, copying to/from CCmode is complete, but since there are only |
| two CC registers usable for conditional tests, this helps gcse not compound |
| the reload problem. */ |
| #define AVOID_CCMODE_COPIES |
| |
| |
| /* Handling Leaf Functions */ |
| |
| /* A C initializer for a vector, indexed by hard register number, which |
| contains 1 for a register that is allowable in a candidate for leaf function |
| treatment. |
| |
| If leaf function treatment involves renumbering the registers, then the |
| registers marked here should be the ones before renumbering--those that GNU |
| CC would ordinarily allocate. The registers which will actually be used in |
| the assembler code, after renumbering, should not be marked with 1 in this |
| vector. |
| |
| Define this macro only if the target machine offers a way to optimize the |
| treatment of leaf functions. */ |
| /* #define LEAF_REGISTERS */ |
| |
| /* A C expression whose value is the register number to which REGNO should be |
| renumbered, when a function is treated as a leaf function. |
| |
| If REGNO is a register number which should not appear in a leaf function |
| before renumbering, then the expression should yield -1, which will cause |
| the compiler to abort. |
| |
| Define this macro only if the target machine offers a way to optimize the |
| treatment of leaf functions, and registers need to be renumbered to do this. */ |
| /* #define LEAF_REG_REMAP(REGNO) */ |
| |
| |
| /* Registers That Form a Stack. */ |
| |
| /* Define this if the machine has any stack-like registers. */ |
| /* #define STACK_REGS */ |
| |
| /* The number of the first stack-like register. This one is the top |
| of the stack. */ |
| /* #define FIRST_STACK_REG */ |
| |
| /* The number of the last stack-like register. This one is the |
| bottom of the stack. */ |
| /* #define LAST_STACK_REG */ |
| |
| |
| /* Register Classes */ |
| |
| /* An enumeral type that must be defined with all the register class names as |
| enumeral values. `NO_REGS' must be first. `ALL_REGS' must be the last |
| register class, followed by one more enumeral value, `LIM_REG_CLASSES', |
| which is not a register class but rather tells how many classes there are. |
| |
| Each register class has a number, which is the value of casting the class |
| name to type `int'. The number serves as an index in many of the tables |
| described below. */ |
| enum reg_class |
| { |
| NO_REGS, |
| REPEAT_REGS, |
| CR_REGS, |
| ACCUM_REGS, |
| OTHER_FLAG_REGS, |
| F0_REGS, |
| F1_REGS, |
| BR_FLAG_REGS, |
| FLAG_REGS, |
| EVEN_REGS, |
| GPR_REGS, |
| ALL_REGS, |
| LIM_REG_CLASSES |
| }; |
| |
| #define GENERAL_REGS GPR_REGS |
| |
| /* The number of distinct register classes, defined as follows: |
| |
| #define N_REG_CLASSES (int) LIM_REG_CLASSES */ |
| #define N_REG_CLASSES ((int) LIM_REG_CLASSES) |
| |
| /* An initializer containing the names of the register classes as C string |
| constants. These names are used in writing some of the debugging dumps. */ |
| #define REG_CLASS_NAMES \ |
| { \ |
| "NO_REGS", \ |
| "REPEAT_REGS", \ |
| "CR_REGS", \ |
| "ACCUM_REGS", \ |
| "OTHER_FLAG_REGS", \ |
| "F0_REGS", \ |
| "F1_REGS", \ |
| "BR_FLAG_REGS", \ |
| "FLAG_REGS", \ |
| "EVEN_REGS", \ |
| "GPR_REGS", \ |
| "ALL_REGS", \ |
| } |
| |
| /* Create mask bits for 3rd word of REG_CLASS_CONTENTS */ |
| #define MASK_WORD3(REG) ((long)1 << ((REG) - 64)) |
| |
| #define NO_MASK 0 |
| #define REPEAT_MASK MASK_WORD3 (CR_RPT_C) |
| #define CR_MASK (MASK_WORD3 (CR_PSW) | MASK_WORD3 (CR_BPSW) \ |
| | MASK_WORD3 (CR_PC) | MASK_WORD3 (CR_BPC) \ |
| | MASK_WORD3 (CR_DPSW) | MASK_WORD3 (CR_DPC) \ |
| | MASK_WORD3 (CR_RPT_C) | MASK_WORD3 (CR_RPT_S) \ |
| | MASK_WORD3 (CR_RPT_E) | MASK_WORD3 (CR_MOD_S) \ |
| | MASK_WORD3 (CR_MOD_E) | MASK_WORD3 (CR_IBA) \ |
| | MASK_WORD3 (CR_EIT_VB) | MASK_WORD3 (CR_INT_S) \ |
| | MASK_WORD3 (CR_INT_M)) |
| |
| #define ACCUM_MASK (MASK_WORD3 (ACCUM_A0) | MASK_WORD3 (ACCUM_A1)) |
| #define OTHER_FLAG_MASK (MASK_WORD3 (FLAG_F2) | MASK_WORD3 (FLAG_F3) \ |
| | MASK_WORD3 (FLAG_SAT) | MASK_WORD3 (FLAG_OVERFLOW) \ |
| | MASK_WORD3 (FLAG_ACC_OVER) | MASK_WORD3 (FLAG_CARRY)) |
| |
| #define F0_MASK MASK_WORD3 (FLAG_F0) |
| #define F1_MASK MASK_WORD3 (FLAG_F1) |
| #define BR_FLAG_MASK (F0_MASK | F1_MASK) |
| #define FLAG_MASK (BR_FLAG_MASK | OTHER_FLAG_MASK) |
| #define SPECIAL_MASK MASK_WORD3 (ARG_POINTER_REGNUM) |
| |
| #define ALL_MASK (CR_MASK | ACCUM_MASK | FLAG_MASK | SPECIAL_MASK) |
| |
| /* An initializer containing the contents of the register classes, as integers |
| which are bit masks. The Nth integer specifies the contents of class N. |
| The way the integer MASK is interpreted is that register R is in the class |
| if `MASK & (1 << R)' is 1. |
| |
| When the machine has more than 32 registers, an integer does not suffice. |
| Then the integers are replaced by sub-initializers, braced groupings |
| containing several integers. Each sub-initializer must be suitable as an |
| initializer for the type `HARD_REG_SET' which is defined in |
| `hard-reg-set.h'. */ |
| #define REG_CLASS_CONTENTS \ |
| { \ |
| { 0x00000000, 0x00000000, NO_MASK }, /* NO_REGS */ \ |
| { 0x00000000, 0x00000000, REPEAT_MASK }, /* REPEAT_REGS */ \ |
| { 0x00000000, 0x00000000, CR_MASK }, /* CR_REGS */ \ |
| { 0x00000000, 0x00000000, ACCUM_MASK }, /* ACCUM_REGS */ \ |
| { 0x00000000, 0x00000000, OTHER_FLAG_MASK }, /* OTHER_FLAG_REGS */ \ |
| { 0x00000000, 0x00000000, F0_MASK }, /* F0_REGS */ \ |
| { 0x00000000, 0x00000000, F1_MASK }, /* F1_REGS */ \ |
| { 0x00000000, 0x00000000, BR_FLAG_MASK }, /* BR_FLAG_REGS */ \ |
| { 0x00000000, 0x00000000, FLAG_MASK }, /* FLAG_REGS */ \ |
| { 0xfffffffc, 0x3fffffff, NO_MASK }, /* EVEN_REGS */ \ |
| { 0xffffffff, 0xffffffff, SPECIAL_MASK }, /* GPR_REGS */ \ |
| { 0xffffffff, 0xffffffff, ALL_MASK }, /* ALL_REGS */ \ |
| } |
| |
| /* A C expression whose value is a register class containing hard register |
| REGNO. In general there is more than one such class; choose a class which |
| is "minimal", meaning that no smaller class also contains the register. */ |
| |
| extern enum reg_class regno_reg_class[FIRST_PSEUDO_REGISTER]; |
| #define REGNO_REG_CLASS(REGNO) regno_reg_class[ (REGNO) ] |
| |
| /* A macro whose definition is the name of the class to which a valid base |
| register must belong. A base register is one used in an address which is |
| the register value plus a displacement. */ |
| #define BASE_REG_CLASS GPR_REGS |
| |
| /* A macro whose definition is the name of the class to which a valid index |
| register must belong. An index register is one used in an address where its |
| value is either multiplied by a scale factor or added to another register |
| (as well as added to a displacement). */ |
| #define INDEX_REG_CLASS GPR_REGS |
| |
| /* A C expression which defines the machine-dependent operand constraint |
| letters for register classes. If CHAR is such a letter, the value should be |
| the register class corresponding to it. Otherwise, the value should be |
| `NO_REGS'. The register letter `r', corresponding to class `GENERAL_REGS', |
| will not be passed to this macro; you do not need to handle it. |
| |
| The following letters are unavailable, due to being used as |
| constraints: |
| '0'..'9' |
| '<', '>' |
| 'E', 'F', 'G', 'H' |
| 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P' |
| 'Q', 'R', 'S', 'T', 'U' |
| 'V', 'X' |
| 'g', 'i', 'm', 'n', 'o', 'p', 'r', 's' */ |
| |
| extern enum reg_class reg_class_from_letter[256]; |
| #define REG_CLASS_FROM_LETTER(CHAR) reg_class_from_letter[(unsigned char)(CHAR)] |
| |
| /* A C expression which is nonzero if register number NUM is suitable for use |
| as a base register in operand addresses. It may be either a suitable hard |
| register or a pseudo register that has been allocated such a hard register. */ |
| |
| #define REGNO_OK_FOR_BASE_P(NUM) \ |
| ((NUM) < FIRST_PSEUDO_REGISTER \ |
| ? GPR_P (NUM) \ |
| : (reg_renumber[NUM] >= 0 && GPR_P (reg_renumber[NUM]))) |
| |
| |
| /* A C expression which is nonzero if register number NUM is suitable for use |
| as an index register in operand addresses. It may be either a suitable hard |
| register or a pseudo register that has been allocated such a hard register. |
| |
| The difference between an index register and a base register is that the |
| index register may be scaled. If an address involves the sum of two |
| registers, neither one of them scaled, then either one may be labeled the |
| "base" and the other the "index"; but whichever labeling is used must fit |
| the machine's constraints of which registers may serve in each capacity. |
| The compiler will try both labelings, looking for one that is valid, and |
| will reload one or both registers only if neither labeling works. */ |
| |
| #define REGNO_OK_FOR_INDEX_P(NUM) \ |
| ((NUM) < FIRST_PSEUDO_REGISTER \ |
| ? GPR_P (NUM) \ |
| : (reg_renumber[NUM] >= 0 && GPR_P (reg_renumber[NUM]))) |
| |
| /* A C expression that places additional restrictions on the register class to |
| use when it is necessary to copy value X into a register in class CLASS. |
| The value is a register class; perhaps CLASS, or perhaps another, smaller |
| class. On many machines, the following definition is safe: |
| |
| #define PREFERRED_RELOAD_CLASS(X,CLASS) CLASS |
| |
| Sometimes returning a more restrictive class makes better code. For |
| example, on the 68000, when X is an integer constant that is in range for a |
| `moveq' instruction, the value of this macro is always `DATA_REGS' as long |
| as CLASS includes the data registers. Requiring a data register guarantees |
| that a `moveq' will be used. |
| |
| If X is a `const_double', by returning `NO_REGS' you can force X into a |
| memory constant. This is useful on certain machines where immediate |
| floating values cannot be loaded into certain kinds of registers. */ |
| #define PREFERRED_RELOAD_CLASS(X, CLASS) CLASS |
| |
| /* Like `PREFERRED_RELOAD_CLASS', but for output reloads instead of input |
| reloads. If you don't define this macro, the default is to use CLASS, |
| unchanged. */ |
| /* #define PREFERRED_OUTPUT_RELOAD_CLASS(X, CLASS) */ |
| |
| /* A C expression that places additional restrictions on the register class to |
| use when it is necessary to be able to hold a value of mode MODE in a reload |
| register for which class CLASS would ordinarily be used. |
| |
| Unlike `PREFERRED_RELOAD_CLASS', this macro should be used when there are |
| certain modes that simply can't go in certain reload classes. |
| |
| The value is a register class; perhaps CLASS, or perhaps another, smaller |
| class. |
| |
| Don't define this macro unless the target machine has limitations which |
| require the macro to do something nontrivial. */ |
| /* #define LIMIT_RELOAD_CLASS(MODE, CLASS) */ |
| |
| /* Many machines have some registers that cannot be copied directly to or from |
| memory or even from other types of registers. An example is the `MQ' |
| register, which on most machines, can only be copied to or from general |
| registers, but not memory. Some machines allow copying all registers to and |
| from memory, but require a scratch register for stores to some memory |
| locations (e.g., those with symbolic address on the RT, and those with |
| certain symbolic address on the Sparc when compiling PIC). In some cases, |
| both an intermediate and a scratch register are required. |
| |
| You should define these macros to indicate to the reload phase that it may |
| need to allocate at least one register for a reload in addition to the |
| register to contain the data. Specifically, if copying X to a register |
| CLASS in MODE requires an intermediate register, you should define |
| `SECONDARY_INPUT_RELOAD_CLASS' to return the largest register class all of |
| whose registers can be used as intermediate registers or scratch registers. |
| |
| If copying a register CLASS in MODE to X requires an intermediate or scratch |
| register, `SECONDARY_OUTPUT_RELOAD_CLASS' should be defined to return the |
| largest register class required. If the requirements for input and output |
| reloads are the same, the macro `SECONDARY_RELOAD_CLASS' should be used |
| instead of defining both macros identically. |
| |
| The values returned by these macros are often `GENERAL_REGS'. Return |
| `NO_REGS' if no spare register is needed; i.e., if X can be directly copied |
| to or from a register of CLASS in MODE without requiring a scratch register. |
| Do not define this macro if it would always return `NO_REGS'. |
| |
| If a scratch register is required (either with or without an intermediate |
| register), you should define patterns for `reload_inM' or `reload_outM', as |
| required (*note Standard Names::.. These patterns, which will normally be |
| implemented with a `define_expand', should be similar to the `movM' |
| patterns, except that operand 2 is the scratch register. |
| |
| Define constraints for the reload register and scratch register that contain |
| a single register class. If the original reload register (whose class is |
| CLASS) can meet the constraint given in the pattern, the value returned by |
| these macros is used for the class of the scratch register. Otherwise, two |
| additional reload registers are required. Their classes are obtained from |
| the constraints in the insn pattern. |
| |
| X might be a pseudo-register or a `subreg' of a pseudo-register, which could |
| either be in a hard register or in memory. Use `true_regnum' to find out; |
| it will return -1 if the pseudo is in memory and the hard register number if |
| it is in a register. |
| |
| These macros should not be used in the case where a particular class of |
| registers can only be copied to memory and not to another class of |
| registers. In that case, secondary reload registers are not needed and |
| would not be helpful. Instead, a stack location must be used to perform the |
| copy and the `movM' pattern should use memory as an intermediate storage. |
| This case often occurs between floating-point and general registers. */ |
| |
| #define SECONDARY_RELOAD_CLASS(CLASS, MODE, X) \ |
| ((CLASS) == GPR_REGS ? NO_REGS \ |
| : (CLASS) == EVEN_REGS ? NO_REGS \ |
| : (CLASS) == ACCUM_REGS ? EVEN_REGS \ |
| : GPR_REGS) |
| |
| /* #define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) */ |
| /* #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) */ |
| |
| /* Certain machines have the property that some registers cannot be copied to |
| some other registers without using memory. Define this macro on those |
| machines to be a C expression that is non-zero if objects of mode M in |
| registers of CLASS1 can only be copied to registers of class CLASS2 by |
| storing a register of CLASS1 into memory and loading that memory location |
| into a register of CLASS2. |
| |
| Do not define this macro if its value would always be zero. */ |
| /* #define SECONDARY_MEMORY_NEEDED(CLASS1, CLASS2, M) */ |
| |
| /* Normally when `SECONDARY_MEMORY_NEEDED' is defined, the compiler allocates a |
| stack slot for a memory location needed for register copies. If this macro |
| is defined, the compiler instead uses the memory location defined by this |
| macro. |
| |
| Do not define this macro if you do not define |
| `SECONDARY_MEMORY_NEEDED'. */ |
| /* #define SECONDARY_MEMORY_NEEDED_RTX(MODE) */ |
| |
| /* When the compiler needs a secondary memory location to copy between two |
| registers of mode MODE, it normally allocates sufficient memory to hold a |
| quantity of `BITS_PER_WORD' bits and performs the store and load operations |
| in a mode that many bits wide and whose class is the same as that of MODE. |
| |
| This is right thing to do on most machines because it ensures that all bits |
| of the register are copied and prevents accesses to the registers in a |
| narrower mode, which some machines prohibit for floating-point registers. |
| |
| However, this default behavior is not correct on some machines, such as the |
| DEC Alpha, that store short integers in floating-point registers differently |
| than in integer registers. On those machines, the default widening will not |
| work correctly and you must define this macro to suppress that widening in |
| some cases. See the file `alpha.h' for details. |
| |
| Do not define this macro if you do not define `SECONDARY_MEMORY_NEEDED' or |
| if widening MODE to a mode that is `BITS_PER_WORD' bits wide is correct for |
| your machine. */ |
| /* #define SECONDARY_MEMORY_NEEDED_MODE(MODE) */ |
| |
| /* Normally the compiler avoids choosing registers that have been explicitly |
| mentioned in the rtl as spill registers (these registers are normally those |
| used to pass parameters and return values). However, some machines have so |
| few registers of certain classes that there would not be enough registers to |
| use as spill registers if this were done. |
| |
| Define `SMALL_REGISTER_CLASSES' to be an expression with a non-zero value on |
| these machines. When this macro has a non-zero value, the compiler allows |
| registers explicitly used in the rtl to be used as spill registers but |
| avoids extending the lifetime of these registers. |
| |
| It is always safe to define this macro with a non-zero value, but if you |
| unnecessarily define it, you will reduce the amount of optimizations that |
| can be performed in some cases. If you do not define this macro with a |
| non-zero value when it is required, the compiler will run out of spill |
| registers and print a fatal error message. For most machines, you should |
| not define this macro at all. */ |
| /* #define SMALL_REGISTER_CLASSES */ |
| |
| /* A C expression whose value is nonzero if pseudos that have been assigned to |
| registers of class CLASS would likely be spilled because registers of CLASS |
| are needed for spill registers. |
| |
| The default value of this macro returns 1 if CLASS has exactly one register |
| and zero otherwise. On most machines, this default should be used. Only |
| define this macro to some other expression if pseudo allocated by |
| `local-alloc.c' end up in memory because their hard registers were needed |
| for spill registers. If this macro returns nonzero for those classes, those |
| pseudos will only be allocated by `global.c', which knows how to reallocate |
| the pseudo to another register. If there would not be another register |
| available for reallocation, you should not change the definition of this |
| macro since the only effect of such a definition would be to slow down |
| register allocation. */ |
| #define CLASS_LIKELY_SPILLED_P(CLASS) \ |
| ((CLASS) != GPR_REGS && (CLASS) != EVEN_REGS) |
| |
| /* A C expression for the maximum number of consecutive registers of |
| class CLASS needed to hold a value of mode MODE. |
| |
| This is closely related to the macro `HARD_REGNO_NREGS'. In fact, the value |
| of the macro `CLASS_MAX_NREGS (CLASS, MODE)' should be the maximum value of |
| `HARD_REGNO_NREGS (REGNO, MODE)' for all REGNO values in the class CLASS. |
| |
| This macro helps control the handling of multiple-word values in |
| the reload pass. */ |
| |
| #define CLASS_MAX_NREGS(CLASS, MODE) \ |
| (((CLASS) == ACCUM_REGS) \ |
| ? ((GET_MODE_SIZE (MODE) + 8 - 1) / 8) \ |
| : ((GET_MODE_SIZE (MODE) + 4 - 1) / 4)) |
| |
| /* A C expression that defines the machine-dependent operand constraint letters |
| (`I', `J', `K', .. 'P') that specify particular ranges of integer values. |
| If C is one of those letters, the expression should check that VALUE, an |
| integer, is in the appropriate range and return 1 if so, 0 otherwise. If C |
| is not one of those letters, the value should be 0 regardless of VALUE. */ |
| #define CONST_OK_FOR_LETTER_P(VALUE, C) \ |
| ((C) == 'I' ? IN_RANGE_P (VALUE, -32, 31) \ |
| : (C) == 'J' ? IN_RANGE_P (VALUE, 0, 31) \ |
| : (C) == 'K' ? IN_RANGE_P (exact_log2 (VALUE), 0, 31) \ |
| : (C) == 'L' ? IN_RANGE_P (exact_log2 (~ (VALUE)), 0, 31) \ |
| : (C) == 'M' ? ((VALUE) == 32) \ |
| : (C) == 'N' ? ((VALUE) == 1) \ |
| : (C) == 'O' ? ((VALUE) == 0) \ |
| : (C) == 'P' ? IN_RANGE_P (VALUE, 32, 63) \ |
| : FALSE) |
| |
| /* A C expression that defines the machine-dependent operand constraint letters |
| (`G', `H') that specify particular ranges of `const_double' values. |
| |
| If C is one of those letters, the expression should check that VALUE, an RTX |
| of code `const_double', is in the appropriate range and return 1 if so, 0 |
| otherwise. If C is not one of those letters, the value should be 0 |
| regardless of VALUE. |
| |
| `const_double' is used for all floating-point constants and for `DImode' |
| fixed-point constants. A given letter can accept either or both kinds of |
| values. It can use `GET_MODE' to distinguish between these kinds. */ |
| #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \ |
| ((C) == 'G' ? (CONST_DOUBLE_LOW (VALUE) == 0 \ |
| && CONST_DOUBLE_HIGH (VALUE) == 0) \ |
| : (C) == 'H' ? FALSE \ |
| : FALSE) |
| |
| /* A C expression that defines the optional machine-dependent constraint |
| letters (`Q', `R', `S', `T', `U') that can be used to segregate specific |
| types of operands, usually memory references, for the target machine. |
| Normally this macro will not be defined. If it is required for a particular |
| target machine, it should return 1 if VALUE corresponds to the operand type |
| represented by the constraint letter C. If C is not defined as an extra |
| constraint, the value returned should be 0 regardless of VALUE. |
| |
| For example, on the ROMP, load instructions cannot have their output in r0 |
| if the memory reference contains a symbolic address. Constraint letter `Q' |
| is defined as representing a memory address that does *not* contain a |
| symbolic address. An alternative is specified with a `Q' constraint on the |
| input and `r' on the output. The next alternative specifies `m' on the |
| input and a register class that does not include r0 on the output. */ |
| |
| #define EXTRA_CONSTRAINT(VALUE, C) \ |
| (((C) == 'Q') ? short_memory_operand ((VALUE), GET_MODE (VALUE)) \ |
| : ((C) == 'R') ? single_reg_memory_operand ((VALUE), GET_MODE (VALUE)) \ |
| : ((C) == 'S') ? const_addr_memory_operand ((VALUE), GET_MODE (VALUE)) \ |
| : ((C) == 'T') ? long_memory_operand ((VALUE), GET_MODE (VALUE)) \ |
| : ((C) == 'U') ? FALSE \ |
| : FALSE) |
| |
| |
| /* Basic Stack Layout */ |
| |
| /* Stack layout */ |
| |
| /* Structure used to define the d30v stack */ |
| typedef struct d30v_stack { |
| int varargs_p; /* whether this is a varargs function */ |
| int varargs_size; /* size to hold varargs args passed in regs */ |
| int vars_size; /* variable save area size */ |
| int parm_size; /* outgoing parameter size */ |
| int gpr_size; /* size of saved GPR registers */ |
| int accum_size; /* size of saved ACCUM registers */ |
| int total_size; /* total bytes allocated for stack */ |
| /* which registers are to be saved */ |
| int save_offset; /* offset from new sp to start saving vars at */ |
| int link_offset; /* offset r62 is saved at */ |
| int memrefs_varargs; /* # of 2 word memory references for varargs */ |
| int memrefs_2words; /* # of 2 word memory references */ |
| int memrefs_1word; /* # of 1 word memory references */ |
| /* 1 for ldw/stw ops; 2 for ld2w/st2w ops */ |
| unsigned char save_p[FIRST_PSEUDO_REGISTER]; |
| } d30v_stack_t; |
| |
| /* Define this macro if pushing a word onto the stack moves the stack pointer |
| to a smaller address. |
| |
| When we say, "define this macro if ...," it means that the compiler checks |
| this macro only with `#ifdef' so the precise definition used does not |
| matter. */ |
| #define STACK_GROWS_DOWNWARD 1 |
| |
| /* Define this macro if the addresses of local variable slots are at negative |
| offsets from the frame pointer. */ |
| /* #define FRAME_GROWS_DOWNWARD */ |
| |
| /* Define this macro if successive arguments to a function occupy decreasing |
| addresses on the stack. */ |
| /* #define ARGS_GROW_DOWNWARD */ |
| |
| /* Offset from the frame pointer to the first local variable slot to be |
| allocated. |
| |
| If `FRAME_GROWS_DOWNWARD', find the next slot's offset by subtracting the |
| first slot's length from `STARTING_FRAME_OFFSET'. Otherwise, it is found by |
| adding the length of the first slot to the value `STARTING_FRAME_OFFSET'. */ |
| |
| #define STARTING_FRAME_OFFSET \ |
| (D30V_ALIGN (current_function_outgoing_args_size, \ |
| (STACK_BOUNDARY / BITS_PER_UNIT))) |
| |
| /* Offset from the stack pointer register to the first location at which |
| outgoing arguments are placed. If not specified, the default value of zero |
| is used. This is the proper value for most machines. |
| |
| If `ARGS_GROW_DOWNWARD', this is the offset to the location above the first |
| location at which outgoing arguments are placed. */ |
| /* #define STACK_POINTER_OFFSET */ |
| |
| /* Offset from the argument pointer register to the first argument's address. |
| On some machines it may depend on the data type of the function. |
| |
| If `ARGS_GROW_DOWNWARD', this is the offset to the location above the first |
| argument's address. */ |
| #define FIRST_PARM_OFFSET(FUNDECL) 0 |
| |
| /* Offset from the stack pointer register to an item dynamically allocated on |
| the stack, e.g., by `alloca'. |
| |
| The default value for this macro is `STACK_POINTER_OFFSET' plus the length |
| of the outgoing arguments. The default is correct for most machines. See |
| `function.c' for details. */ |
| /* #define STACK_DYNAMIC_OFFSET(FUNDECL) */ |
| |
| /* A C expression whose value is RTL representing the address in a stack frame |
| where the pointer to the caller's frame is stored. Assume that FRAMEADDR is |
| an RTL expression for the address of the stack frame itself. |
| |
| If you don't define this macro, the default is to return the value of |
| FRAMEADDR--that is, the stack frame address is also the address of the stack |
| word that points to the previous frame. */ |
| /* #define DYNAMIC_CHAIN_ADDRESS(FRAMEADDR) */ |
| |
| /* If defined, a C expression that produces the machine-specific code to setup |
| the stack so that arbitrary frames can be accessed. For example, on the |
| Sparc, we must flush all of the register windows to the stack before we can |
| access arbitrary stack frames. This macro will seldom need to be defined. */ |
| /* #define SETUP_FRAME_ADDRESSES() */ |
| |
| /* A C expression whose value is RTL representing the value of the return |
| address for the frame COUNT steps up from the current frame, after the |
| prologue. FRAMEADDR is the frame pointer of the COUNT frame, or the frame |
| pointer of the COUNT - 1 frame if `RETURN_ADDR_IN_PREVIOUS_FRAME' is |
| defined. |
| |
| The value of the expression must always be the correct address when COUNT is |
| zero, but may be `NULL_RTX' if there is not way to determine the return |
| address of other frames. */ |
| |
| /* ??? This definition fails for leaf functions. There is currently no |
| general solution for this problem. */ |
| |
| /* ??? There appears to be no way to get the return address of any previous |
| frame except by disassembling instructions in the prologue/epilogue. |
| So currently we support only the current frame. */ |
| |
| #define RETURN_ADDR_RTX(COUNT, FRAME) \ |
| ((COUNT) == 0 ? d30v_return_addr() : const0_rtx) |
| |
| /* Define this if the return address of a particular stack frame is |
| accessed from the frame pointer of the previous stack frame. */ |
| /* #define RETURN_ADDR_IN_PREVIOUS_FRAME */ |
| |
| /* A C expression whose value is RTL representing the location of the incoming |
| return address at the beginning of any function, before the prologue. This |
| RTL is either a `REG', indicating that the return value is saved in `REG', |
| or a `MEM' representing a location in the stack. |
| |
| You only need to define this macro if you want to support call frame |
| debugging information like that provided by DWARF 2. */ |
| |
| /* Before the prologue, RA lives in r62. */ |
| #define INCOMING_RETURN_ADDR_RTX gen_rtx (REG, Pmode, GPR_LINK) |
| |
| /* A C expression whose value is an integer giving the offset, in bytes, from |
| the value of the stack pointer register to the top of the stack frame at the |
| beginning of any function, before the prologue. The top of the frame is |
| defined to be the value of the stack pointer in the previous frame, just |
| before the call instruction. |
| |
| You only need to define this macro if you want to support call frame |
| debugging information like that provided by DWARF 2. */ |
| #define INCOMING_FRAME_SP_OFFSET 0 |
| |
| /* Initialize data used by insn expanders. This is called from insn_emit, |
| once for every function before code is generated. */ |
| |
| #define INIT_EXPANDERS d30v_init_expanders () |
| |
| |
| /* Stack Checking. */ |
| |
| /* A nonzero value if stack checking is done by the configuration files in a |
| machine-dependent manner. You should define this macro if stack checking is |
| require by the ABI of your machine or if you would like to have to stack |
| checking in some more efficient way than GNU CC's portable approach. The |
| default value of this macro is zero. */ |
| /* #define STACK_CHECK_BUILTIN */ |
| |
| /* An integer representing the interval at which GNU CC must generate stack |
| probe instructions. You will normally define this macro to be no larger |
| than the size of the "guard pages" at the end of a stack area. The default |
| value of 4096 is suitable for most systems. */ |
| /* #define STACK_CHECK_PROBE_INTERVAL */ |
| |
| /* An integer which is nonzero if GNU CC should perform the stack probe as a |
| load instruction and zero if GNU CC should use a store instruction. The |
| default is zero, which is the most efficient choice on most systems. */ |
| /* #define STACK_CHECK_PROBE_LOAD */ |
| |
| /* The number of bytes of stack needed to recover from a stack overflow, for |
| languages where such a recovery is supported. The default value of 75 words |
| should be adequate for most machines. */ |
| /* #define STACK_CHECK_PROTECT */ |
| |
| /* The maximum size of a stack frame, in bytes. GNU CC will generate probe |
| instructions in non-leaf functions to ensure at least this many bytes of |
| stack are available. If a stack frame is larger than this size, stack |
| checking will not be reliable and GNU CC will issue a warning. The default |
| is chosen so that GNU CC only generates one instruction on most systems. |
| You should normally not change the default value of this macro. */ |
| /* #define STACK_CHECK_MAX_FRAME_SIZE */ |
| |
| /* GNU CC uses this value to generate the above warning message. It represents |
| the amount of fixed frame used by a function, not including space for any |
| callee-saved registers, temporaries and user variables. You need only |
| specify an upper bound for this amount and will normally use the default of |
| four words. */ |
| /* #define STACK_CHECK_FIXED_FRAME_SIZE */ |
| |
| /* The maximum size, in bytes, of an object that GNU CC will place in the fixed |
| area of the stack frame when the user specifies `-fstack-check'. GNU CC |
| computed the default from the values of the above macros and you will |
| normally not need to override that default. */ |
| /* #define STACK_CHECK_MAX_VAR_SIZE */ |
| |
| |
| /* Register That Address the Stack Frame. */ |
| |
| /* The register number of the stack pointer register, which must also be a |
| fixed register according to `FIXED_REGISTERS'. On most machines, the |
| hardware determines which register this is. */ |
| #define STACK_POINTER_REGNUM GPR_SP |
| |
| /* The register number of the frame pointer register, which is used to access |
| automatic variables in the stack frame. On some machines, the hardware |
| determines which register this is. On other machines, you can choose any |
| register you wish for this purpose. */ |
| #define FRAME_POINTER_REGNUM GPR_FP |
| |
| /* On some machines the offset between the frame pointer and starting offset of |
| the automatic variables is not known until after register allocation has |
| been done (for example, because the saved registers are between these two |
| locations). On those machines, define `FRAME_POINTER_REGNUM' the number of |
| a special, fixed register to be used internally until the offset is known, |
| and define `HARD_FRAME_POINTER_REGNUM' to be actual the hard register number |
| used for the frame pointer. |
| |
| You should define this macro only in the very rare circumstances when it is |
| not possible to calculate the offset between the frame pointer and the |
| automatic variables until after register allocation has been completed. |
| When this macro is defined, you must also indicate in your definition of |
| `ELIMINABLE_REGS' how to eliminate `FRAME_POINTER_REGNUM' into either |
| `HARD_FRAME_POINTER_REGNUM' or `STACK_POINTER_REGNUM'. |
| |
| Do not define this macro if it would be the same as `FRAME_POINTER_REGNUM'. */ |
| /* #define HARD_FRAME_POINTER_REGNUM */ |
| |
| /* The register number of the arg pointer register, which is used to access the |
| function's argument list. On some machines, this is the same as the frame |
| pointer register. On some machines, the hardware determines which register |
| this is. On other machines, you can choose any register you wish for this |
| purpose. If this is not the same register as the frame pointer register, |
| then you must mark it as a fixed register according to `FIXED_REGISTERS', or |
| arrange to be able to eliminate it (*note Elimination::.). */ |
| /* #define ARG_POINTER_REGNUM */ |
| |
| /* The register number of the return address pointer register, which is used to |
| access the current function's return address from the stack. On some |
| machines, the return address is not at a fixed offset from the frame pointer |
| or stack pointer or argument pointer. This register can be defined to point |
| to the return address on the stack, and then be converted by |
| `ELIMINABLE_REGS' into either the frame pointer or stack pointer. |
| |
| Do not define this macro unless there is no other way to get the return |
| address from the stack. */ |
| /* #define RETURN_ADDRESS_POINTER_REGNUM */ |
| |
| /* Register numbers used for passing a function's static chain pointer. If |
| register windows are used, the register number as seen by the called |
| function is `STATIC_CHAIN_INCOMING_REGNUM', while the register number as |
| seen by the calling function is `STATIC_CHAIN_REGNUM'. If these registers |
| are the same, `STATIC_CHAIN_INCOMING_REGNUM' need not be defined. |
| |
| The static chain register need not be a fixed register. |
| |
| If the static chain is passed in memory, these macros should not be defined; |
| instead, the next two macros should be defined. */ |
| |
| #define STATIC_CHAIN_REGNUM (GPR_FIRST + 18) |
| /* #define STATIC_CHAIN_INCOMING_REGNUM */ |
| |
| /* If the static chain is passed in memory, these macros provide rtx giving |
| `mem' expressions that denote where they are stored. `STATIC_CHAIN' and |
| `STATIC_CHAIN_INCOMING' give the locations as seen by the calling and called |
| functions, respectively. Often the former will be at an offset from the |
| stack pointer and the latter at an offset from the frame pointer. |
| |
| The variables `stack_pointer_rtx', `frame_pointer_rtx', and |
| `arg_pointer_rtx' will have been initialized prior to the use of these |
| macros and should be used to refer to those items. |
| |
| If the static chain is passed in a register, the two previous |
| macros should be defined instead. */ |
| /* #define STATIC_CHAIN */ |
| /* #define STATIC_CHAIN_INCOMING */ |
| |
| |
| /* Eliminating the Frame Pointer and the Arg Pointer */ |
| |
| /* A C expression which is nonzero if a function must have and use a frame |
| pointer. This expression is evaluated in the reload pass. If its value is |
| nonzero the function will have a frame pointer. |
| |
| The expression can in principle examine the current function and decide |
| according to the facts, but on most machines the constant 0 or the constant |
| 1 suffices. Use 0 when the machine allows code to be generated with no |
| frame pointer, and doing so saves some time or space. Use 1 when there is |
| no possible advantage to avoiding a frame pointer. |
| |
| In certain cases, the compiler does not know how to produce valid code |
| without a frame pointer. The compiler recognizes those cases and |
| automatically gives the function a frame pointer regardless of what |
| `FRAME_POINTER_REQUIRED' says. You don't need to worry about them. |
| |
| In a function that does not require a frame pointer, the frame pointer |
| register can be allocated for ordinary usage, unless you mark it as a fixed |
| register. See `FIXED_REGISTERS' for more information. */ |
| #define FRAME_POINTER_REQUIRED 0 |
| |
| /* A C statement to store in the variable DEPTH-VAR the difference between the |
| frame pointer and the stack pointer values immediately after the function |
| prologue. The value would be computed from information such as the result |
| of `get_frame_size ()' and the tables of registers `regs_ever_live' and |
| `call_used_regs'. |
| |
| If `ELIMINABLE_REGS' is defined, this macro will be not be used and need not |
| be defined. Otherwise, it must be defined even if `FRAME_POINTER_REQUIRED' |
| is defined to always be true; in that case, you may set DEPTH-VAR to |
| anything. */ |
| /* #define INITIAL_FRAME_POINTER_OFFSET(DEPTH_VAR) */ |
| |
| /* If defined, this macro specifies a table of register pairs used to eliminate |
| unneeded registers that point into the stack frame. If it is not defined, |
| the only elimination attempted by the compiler is to replace references to |
| the frame pointer with references to the stack pointer. |
| |
| The definition of this macro is a list of structure initializations, each of |
| which specifies an original and replacement register. |
| |
| On some machines, the position of the argument pointer is not known until |
| the compilation is completed. In such a case, a separate hard register must |
| be used for the argument pointer. This register can be eliminated by |
| replacing it with either the frame pointer or the argument pointer, |
| depending on whether or not the frame pointer has been eliminated. |
| |
| In this case, you might specify: |
| #define ELIMINABLE_REGS \ |
| {{ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ |
| {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ |
| {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} |
| |
| Note that the elimination of the argument pointer with the stack pointer is |
| specified first since that is the preferred elimination. */ |
| #define ELIMINABLE_REGS \ |
| { \ |
| { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM }, \ |
| { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM }, \ |
| { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM } \ |
| } |
| |
| /* A C expression that returns non-zero if the compiler is allowed to try to |
| replace register number FROM-REG with register number TO-REG. This macro |
| need only be defined if `ELIMINABLE_REGS' is defined, and will usually be |
| the constant 1, since most of the cases preventing register elimination are |
| things that the compiler already knows about. */ |
| |
| #define CAN_ELIMINATE(FROM, TO) \ |
| ((FROM) == ARG_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM \ |
| ? ! frame_pointer_needed \ |
| : 1) |
| |
| /* This macro is similar to `INITIAL_FRAME_POINTER_OFFSET'. It specifies the |
| initial difference between the specified pair of registers. This macro must |
| be defined if `ELIMINABLE_REGS' is defined. */ |
| |
| #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ |
| { \ |
| d30v_stack_t *info = d30v_stack_info (); \ |
| \ |
| if ((FROM) == FRAME_POINTER_REGNUM) \ |
| (OFFSET) = 0; \ |
| else if ((FROM) == ARG_POINTER_REGNUM) \ |
| (OFFSET) = info->total_size - current_function_pretend_args_size; \ |
| else \ |
| abort (); \ |
| } |
| |
| |
| /* Passing Function Arguments on the Stack */ |
| |
| /* Define this macro if an argument declared in a prototype as an integral type |
| smaller than `int' should actually be passed as an `int'. In addition to |
| avoiding errors in certain cases of mismatch, it also makes for better code |
| on certain machines. */ |
| /* #define PROMOTE_PROTOTYPES */ |
| |
| /* A C expression that is the number of bytes actually pushed onto the stack |
| when an instruction attempts to push NPUSHED bytes. |
| |
| If the target machine does not have a push instruction, do not define this |
| macro. That directs GNU CC to use an alternate strategy: to allocate the |
| entire argument block and then store the arguments into it. |
| |
| On some machines, the definition |
| |
| #define PUSH_ROUNDING(BYTES) (BYTES) |
| |
| will suffice. But on other machines, instructions that appear to push one |
| byte actually push two bytes in an attempt to maintain alignment. Then the |
| definition should be |
| |
| #define PUSH_ROUNDING(BYTES) (((BYTES) + 1) & ~1) */ |
| /* #define PUSH_ROUNDING(NPUSHED) */ |
| |
| /* If defined, the maximum amount of space required for outgoing arguments will |
| be computed and placed into the variable |
| `current_function_outgoing_args_size'. No space will be pushed onto the |
| stack for each call; instead, the function prologue should increase the |
| stack frame size by this amount. |
| |
| Defining both `PUSH_ROUNDING' and `ACCUMULATE_OUTGOING_ARGS' is not |
| proper. */ |
| #define ACCUMULATE_OUTGOING_ARGS 1 |
| |
| /* Define this macro if functions should assume that stack space has been |
| allocated for arguments even when their values are passed in registers. |
| |
| The value of this macro is the size, in bytes, of the area reserved for |
| arguments passed in registers for the function represented by FNDECL. |
| |
| This space can be allocated by the caller, or be a part of the |
| machine-dependent stack frame: `OUTGOING_REG_PARM_STACK_SPACE' says |
| which. */ |
| /* #define REG_PARM_STACK_SPACE(FNDECL) */ |
| |
| /* Define these macros in addition to the one above if functions might allocate |
| stack space for arguments even when their values are passed in registers. |
| These should be used when the stack space allocated for arguments in |
| registers is not a simple constant independent of the function declaration. |
| |
| The value of the first macro is the size, in bytes, of the area that we |
| should initially assume would be reserved for arguments passed in registers. |
| |
| The value of the second macro is the actual size, in bytes, of the area that |
| will be reserved for arguments passed in registers. This takes two |
| arguments: an integer representing the number of bytes of fixed sized |
| arguments on the stack, and a tree representing the number of bytes of |
| variable sized arguments on the stack. |
| |
| When these macros are defined, `REG_PARM_STACK_SPACE' will only be called |
| for libcall functions, the current function, or for a function being called |
| when it is known that such stack space must be allocated. In each case this |
| value can be easily computed. |
| |
| When deciding whether a called function needs such stack space, and how much |
| space to reserve, GNU CC uses these two macros instead of |
| `REG_PARM_STACK_SPACE'. */ |
| /* #define MAYBE_REG_PARM_STACK_SPACE */ |
| /* #define FINAL_REG_PARM_STACK_SPACE(CONST_SIZE, VAR_SIZE) */ |
| |
| /* Define this if it is the responsibility of the caller to allocate the area |
| reserved for arguments passed in registers. |
| |
| If `ACCUMULATE_OUTGOING_ARGS' is defined, this macro controls whether the |
| space for these arguments counts in the value of |
| `current_function_outgoing_args_size'. */ |
| /* #define OUTGOING_REG_PARM_STACK_SPACE */ |
| |
| /* Define this macro if `REG_PARM_STACK_SPACE' is defined, but the stack |
| parameters don't skip the area specified by it. |
| |
| Normally, when a parameter is not passed in registers, it is placed on the |
| stack beyond the `REG_PARM_STACK_SPACE' area. Defining this macro |
| suppresses this behavior and causes the parameter to be passed on the stack |
| in its natural location. */ |
| /* #define STACK_PARMS_IN_REG_PARM_AREA */ |
| |
| /* A C expression that should indicate the number of bytes of its own arguments |
| that a function pops on returning, or 0 if the function pops no arguments |
| and the caller must therefore pop them all after the function returns. |
| |
| FUNDECL is a C variable whose value is a tree node that describes the |
| function in question. Normally it is a node of type `FUNCTION_DECL' that |
| describes the declaration of the function. From this it is possible to |
| obtain the DECL_ATTRIBUTES of the function. |
| |
| FUNTYPE is a C variable whose value is a tree node that describes the |
| function in question. Normally it is a node of type `FUNCTION_TYPE' that |
| describes the data type of the function. From this it is possible to obtain |
| the data types of the value and arguments (if known). |
| |
| When a call to a library function is being considered, FUNTYPE will contain |
| an identifier node for the library function. Thus, if you need to |
| distinguish among various library functions, you can do so by their names. |
| Note that "library function" in this context means a function used to |
| perform arithmetic, whose name is known specially in the compiler and was |
| not mentioned in the C code being compiled. |
| |
| STACK-SIZE is the number of bytes of arguments passed on the stack. If a |
| variable number of bytes is passed, it is zero, and argument popping will |
| always be the responsibility of the calling function. |
| |
| On the VAX, all functions always pop their arguments, so the definition of |
| this macro is STACK-SIZE. On the 68000, using the standard calling |
| convention, no functions pop their arguments, so the value of the macro is |
| always 0 in this case. But an alternative calling convention is available |
| in which functions that take a fixed number of arguments pop them but other |
| functions (such as `printf') pop nothing (the caller pops all). When this |
| convention is in use, FUNTYPE is examined to determine whether a function |
| takes a fixed number of arguments. */ |
| #define RETURN_POPS_ARGS(FUNDECL, FUNTYPE, STACK_SIZE) 0 |
| |
| |
| /* Function Arguments in Registers */ |
| |
| /* A C expression that controls whether a function argument is passed in a |
| register, and which register. |
| |
| The arguments are CUM, which summarizes all the previous arguments; MODE, |
| the machine mode of the argument; TYPE, the data type of the argument as a |
| tree node or 0 if that is not known (which happens for C support library |
| functions); and NAMED, which is 1 for an ordinary argument and 0 for |
| nameless arguments that correspond to `...' in the called function's |
| prototype. |
| |
| The value of the expression should either be a `reg' RTX for the hard |
| register in which to pass the argument, or zero to pass the argument on the |
| stack. |
| |
| For machines like the VAX and 68000, where normally all arguments are |
| pushed, zero suffices as a definition. |
| |
| The usual way to make the ANSI library `stdarg.h' work on a machine where |
| some arguments are usually passed in registers, is to cause nameless |
| arguments to be passed on the stack instead. This is done by making |
| `FUNCTION_ARG' return 0 whenever NAMED is 0. |
| |
| You may use the macro `MUST_PASS_IN_STACK (MODE, TYPE)' in the definition of |
| this macro to determine if this argument is of a type that must be passed in |
| the stack. If `REG_PARM_STACK_SPACE' is not defined and `FUNCTION_ARG' |
| returns non-zero for such an argument, the compiler will abort. If |
| `REG_PARM_STACK_SPACE' is defined, the argument will be computed in the |
| stack and then loaded into a register. */ |
| |
| #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \ |
| d30v_function_arg (&CUM, (int)MODE, TYPE, NAMED, FALSE) |
| |
| /* Define this macro if the target machine has "register windows", so that the |
| register in which a function sees an arguments is not necessarily the same |
| as the one in which the caller passed the argument. |
| |
| For such machines, `FUNCTION_ARG' computes the register in which the caller |
| passes the value, and `FUNCTION_INCOMING_ARG' should be defined in a similar |
| fashion to tell the function being called where the arguments will arrive. |
| |
| If `FUNCTION_INCOMING_ARG' is not defined, `FUNCTION_ARG' serves both |
| purposes. */ |
| |
| #define FUNCTION_INCOMING_ARG(CUM, MODE, TYPE, NAMED) \ |
| d30v_function_arg (&CUM, (int)MODE, TYPE, NAMED, TRUE) |
| |
| /* A C expression for the number of words, at the beginning of an argument, |
| must be put in registers. The value must be zero for arguments that are |
| passed entirely in registers or that are entirely pushed on the stack. |
| |
| On some machines, certain arguments must be passed partially in registers |
| and partially in memory. On these machines, typically the first N words of |
| arguments are passed in registers, and the rest on the stack. If a |
| multi-word argument (a `double' or a structure) crosses that boundary, its |
| first few words must be passed in registers and the rest must be pushed. |
| This macro tells the compiler when this occurs, and how many of the words |
| should go in registers. |
| |
| `FUNCTION_ARG' for these arguments should return the first register to be |
| used by the caller for this argument; likewise `FUNCTION_INCOMING_ARG', for |
| the called function. */ |
| #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \ |
| d30v_function_arg_partial_nregs (&CUM, (int)MODE, TYPE, NAMED) |
| |
| /* A C expression that indicates when an argument must be passed by reference. |
| If nonzero for an argument, a copy of that argument is made in memory and a |
| pointer to the argument is passed instead of the argument itself. The |
| pointer is passed in whatever way is appropriate for passing a pointer to |
| that type. |
| |
| On machines where `REG_PARM_STACK_SPACE' is not defined, a suitable |
| definition of this macro might be |
| #define FUNCTION_ARG_PASS_BY_REFERENCE\ |
| (CUM, MODE, TYPE, NAMED) \ |
| MUST_PASS_IN_STACK (MODE, TYPE) */ |
| #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) 0 |
| |
| /* If defined, a C expression that indicates when it is the called function's |
| responsibility to make a copy of arguments passed by invisible reference. |
| Normally, the caller makes a copy and passes the address of the copy to the |
| routine being called. When FUNCTION_ARG_CALLEE_COPIES is defined and is |
| nonzero, the caller does not make a copy. Instead, it passes a pointer to |
| the "live" value. The called function must not modify this value. If it |
| can be determined that the value won't be modified, it need not make a copy; |
| otherwise a copy must be made. */ |
| /* #define FUNCTION_ARG_CALLEE_COPIES(CUM, MODE, TYPE, NAMED) */ |
| |
| /* A C type for declaring a variable that is used as the first argument of |
| `FUNCTION_ARG' and other related values. For some target machines, the type |
| `int' suffices and can hold the number of bytes of argument so far. |
| |
| There is no need to record in `CUMULATIVE_ARGS' anything about the arguments |
| that have been passed on the stack. The compiler has other variables to |
| keep track of that. For target machines on which all arguments are passed |
| on the stack, there is no need to store anything in `CUMULATIVE_ARGS'; |
| however, the data structure must exist and should not be empty, so use |
| `int'. */ |
| typedef int CUMULATIVE_ARGS; |
| |
| /* A C statement (sans semicolon) for initializing the variable CUM for the |
| state at the beginning of the argument list. The variable has type |
| `CUMULATIVE_ARGS'. The value of FNTYPE is the tree node for the data type |
| of the function which will receive the args, or 0 if the args are to a |
| compiler support library function. The value of INDIRECT is nonzero when |
| processing an indirect call, for example a call through a function pointer. |
| The value of INDIRECT is zero for a call to an explicitly named function, a |
| library function call, or when `INIT_CUMULATIVE_ARGS' is used to find |
| arguments for the function being compiled. |
| |
| When processing a call to a compiler support library function, LIBNAME |
| identifies which one. It is a `symbol_ref' rtx which contains the name of |
| the function, as a string. LIBNAME is 0 when an ordinary C function call is |
| being processed. Thus, each time this macro is called, either LIBNAME or |
| FNTYPE is nonzero, but never both of them at once. */ |
| |
| #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT) \ |
| d30v_init_cumulative_args (&CUM, FNTYPE, LIBNAME, INDIRECT, FALSE) |
| |
| /* Like `INIT_CUMULATIVE_ARGS' but overrides it for the purposes of finding the |
| arguments for the function being compiled. If this macro is undefined, |
| `INIT_CUMULATIVE_ARGS' is used instead. |
| |
| The value passed for LIBNAME is always 0, since library routines with |
| special calling conventions are never compiled with GNU CC. The argument |
| LIBNAME exists for symmetry with `INIT_CUMULATIVE_ARGS'. */ |
| |
| #define INIT_CUMULATIVE_INCOMING_ARGS(CUM, FNTYPE, LIBNAME) \ |
| d30v_init_cumulative_args (&CUM, FNTYPE, LIBNAME, FALSE, TRUE) |
| |
| /* A C statement (sans semicolon) to update the summarizer variable CUM to |
| advance past an argument in the argument list. The values MODE, TYPE and |
| NAMED describe that argument. Once this is done, the variable CUM is |
| suitable for analyzing the *following* argument with `FUNCTION_ARG', etc. |
| |
| This macro need not do anything if the argument in question was passed on |
| the stack. The compiler knows how to track the amount of stack space used |
| for arguments without any special help. */ |
| |
| #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ |
| d30v_function_arg_advance (&CUM, (int) MODE, TYPE, NAMED) |
| |
| /* If defined, a C expression which determines whether, and in which direction, |
| to pad out an argument with extra space. The value should be of type `enum |
| direction': either `upward' to pad above the argument, `downward' to pad |
| below, or `none' to inhibit padding. |
| |
| The *amount* of padding is always just enough to reach the next multiple of |
| `FUNCTION_ARG_BOUNDARY'; this macro does not control it. |
| |
| This macro has a default definition which is right for most systems. For |
| little-endian machines, the default is to pad upward. For big-endian |
| machines, the default is to pad downward for an argument of constant size |
| shorter than an `int', and upward otherwise. */ |
| /* #define FUNCTION_ARG_PADDING(MODE, TYPE) */ |
| |
| /* If defined, a C expression that gives the alignment boundary, in bits, of an |
| argument with the specified mode and type. If it is not defined, |
| `PARM_BOUNDARY' is used for all arguments. */ |
| |
| #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \ |
| d30v_function_arg_boundary ((int) MODE, TYPE) |
| |
| /* A C expression that is nonzero if REGNO is the number of a hard register in |
| which function arguments are sometimes passed. This does *not* include |
| implicit arguments such as the static chain and the structure-value address. |
| On many machines, no registers can be used for this purpose since all |
| function arguments are pushed on the stack. */ |
| |
| #define FUNCTION_ARG_REGNO_P(REGNO) \ |
| IN_RANGE_P (REGNO, GPR_ARG_FIRST, GPR_ARG_LAST) |
| |
| |
| /* How Scalar Function Values are Returned */ |
| |
| /* A C expression to create an RTX representing the place where a function |
| returns a value of data type VALTYPE. VALTYPE is a tree node representing a |
| data type. Write `TYPE_MODE (VALTYPE)' to get the machine mode used to |
| represent that type. On many machines, only the mode is relevant. |
| (Actually, on most machines, scalar values are returned in the same place |
| regardless of mode). |
| |
| If `PROMOTE_FUNCTION_RETURN' is defined, you must apply the same promotion |
| rules specified in `PROMOTE_MODE' if VALTYPE is a scalar type. |
| |
| If the precise function being called is known, FUNC is a tree node |
| (`FUNCTION_DECL') for it; otherwise, FUNC is a null pointer. This makes it |
| possible to use a different value-returning convention for specific |
| functions when all their calls are known. |
| |
| `FUNCTION_VALUE' is not used for return vales with aggregate data types, |
| because these are returned in another way. See `STRUCT_VALUE_REGNUM' and |
| related macros, below. */ |
| |
| #define FUNCTION_VALUE(VALTYPE, FUNC) \ |
| gen_rtx (REG, TYPE_MODE (VALTYPE), GPR_RET_VALUE) |
| |
| /* Define this macro if the target machine has "register windows" so that the |
| register in which a function returns its value is not the same as the one in |
| which the caller sees the value. |
| |
| For such machines, `FUNCTION_VALUE' computes the register in which the |
| caller will see the value. `FUNCTION_OUTGOING_VALUE' should be defined in a |
| similar fashion to tell the function where to put the value. |
| |
| If `FUNCTION_OUTGOING_VALUE' is not defined, `FUNCTION_VALUE' serves both |
| purposes. |
| |
| `FUNCTION_OUTGOING_VALUE' is not used for return vales with aggregate data |
| types, because these are returned in another way. See `STRUCT_VALUE_REGNUM' |
| and related macros, below. */ |
| /* #define FUNCTION_OUTGOING_VALUE(VALTYPE, FUNC) */ |
| |
| /* A C expression to create an RTX representing the place where a library |
| function returns a value of mode MODE. If the precise function being called |
| is known, FUNC is a tree node (`FUNCTION_DECL') for it; otherwise, FUNC is a |
| null pointer. This makes it possible to use a different value-returning |
| convention for specific functions when all their calls are known. |
| |
| Note that "library function" in this context means a compiler support |
| routine, used to perform arithmetic, whose name is known specially by the |
| compiler and was not mentioned in the C code being compiled. |
| |
| The definition of `LIBRARY_VALUE' need not be concerned aggregate data |
| types, because none of the library functions returns such types. */ |
| |
| #define LIBCALL_VALUE(MODE) gen_rtx (REG, MODE, GPR_RET_VALUE) |
| |
| /* A C expression that is nonzero if REGNO is the number of a hard register in |
| which the values of called function may come back. |
| |
| A register whose use for returning values is limited to serving as the |
| second of a pair (for a value of type `double', say) need not be recognized |
| by this macro. So for most machines, this definition suffices: |
| |
| #define FUNCTION_VALUE_REGNO_P(N) ((N) == 0) |
| |
| If the machine has register windows, so that the caller and the called |
| function use different registers for the return value, this macro should |
| recognize only the caller's register numbers. */ |
| |
| #define FUNCTION_VALUE_REGNO_P(REGNO) ((REGNO) == GPR_RET_VALUE) |
| |
| /* Define this macro if `untyped_call' and `untyped_return' need more space |
| than is implied by `FUNCTION_VALUE_REGNO_P' for saving and restoring an |
| arbitrary return value. */ |
| /* #define APPLY_RESULT_SIZE */ |
| |
| |
| /* How Large Values are Returned */ |
| |
| /* A C expression which can inhibit the returning of certain function values in |
| registers, based on the type of value. A nonzero value says to return the |
| function value in memory, just as large structures are always returned. |
| Here TYPE will be a C expression of type `tree', representing the data type |
| of the value. |
| |
| Note that values of mode `BLKmode' must be explicitly handled by this macro. |
| Also, the option `-fpcc-struct-return' takes effect regardless of this |
| macro. On most systems, it is possible to leave the macro undefined; this |
| causes a default definition to be used, whose value is the constant 1 for |
| `BLKmode' values, and 0 otherwise. |
| |
| Do not use this macro to indicate that structures and unions should always |
| be returned in memory. You should instead use `DEFAULT_PCC_STRUCT_RETURN' |
| to indicate this. */ |
| /* #define RETURN_IN_MEMORY(TYPE) */ |
| |
| /* Define this macro to be 1 if all structure and union return values must be |
| in memory. Since this results in slower code, this should be defined only |
| if needed for compatibility with other compilers or with an ABI. If you |
| define this macro to be 0, then the conventions used for structure and union |
| return values are decided by the `RETURN_IN_MEMORY' macro. |
| |
| If not defined, this defaults to the value 1. */ |
| /* #define DEFAULT_PCC_STRUCT_RETURN */ |
| |
| /* If the structure value address is passed in a register, then |
| `STRUCT_VALUE_REGNUM' should be the number of that register. */ |
| |
| #define STRUCT_VALUE_REGNUM GPR_ARG_FIRST |
| |
| /* If the structure value address is not passed in a register, define |
| `STRUCT_VALUE' as an expression returning an RTX for the place where the |
| address is passed. If it returns 0, the address is passed as an "invisible" |
| first argument. */ |
| |
| #define STRUCT_VALUE 0 |
| |
| /* On some architectures the place where the structure value address is found |
| by the called function is not the same place that the caller put it. This |
| can be due to register windows, or it could be because the function prologue |
| moves it to a different place. |
| |
| If the incoming location of the structure value address is in a register, |
| define this macro as the register number. */ |
| /* #define STRUCT_VALUE_INCOMING_REGNUM */ |
| |
| /* If the incoming location is not a register, then you should define |
| `STRUCT_VALUE_INCOMING' as an expression for an RTX for where the called |
| function should find the value. If it should find the value on the stack, |
| define this to create a `mem' which refers to the frame pointer. A |
| definition of 0 means that the address is passed as an "invisible" first |
| argument. */ |
| /* #define STRUCT_VALUE_INCOMING */ |
| |
| /* Define this macro if the usual system convention on the target machine for |
| returning structures and unions is for the called function to return the |
| address of a static variable containing the value. |
| |
| Do not define this if the usual system convention is for the caller to pass |
| an address to the subroutine. |
| |
| This macro has effect in `-fpcc-struct-return' mode, but it does nothing |
| when you use `-freg-struct-return' mode. */ |
| /* #define PCC_STATIC_STRUCT_RETURN */ |
| |
| |
| /* Caller-Saves Register Allocation */ |
| |
| /* Define this macro if function calls on the target machine do not preserve |
| any registers; in other words, if `CALL_USED_REGISTERS' has 1 for all |
| registers. This macro enables `-fcaller-saves' by default. Eventually that |
| option will be enabled by default on all machines and both the option and |
| this macro will be eliminated. */ |
| /* #define DEFAULT_CALLER_SAVES */ |
| |
| /* A C expression to determine whether it is worthwhile to consider placing a |
| pseudo-register in a call-clobbered hard register and saving and restoring |
| it around each function call. The expression should be 1 when this is worth |
| doing, and 0 otherwise. |
| |
| If you don't define this macro, a default is used which is good on most |
| machines: `4 * CALLS < REFS'. */ |
| /* #define CALLER_SAVE_PROFITABLE(REFS, CALLS) */ |
| |
| |
| /* #define EXIT_IGNORE_STACK */ |
| |
| /* Define this macro as a C expression that is nonzero for registers |
| are used by the epilogue or the `return' pattern. The stack and |
| frame pointer registers are already be assumed to be used as |
| needed. */ |
| #define EPILOGUE_USES(REGNO) ((REGNO) == GPR_LINK) |
| |
| /* Define this macro if the function epilogue contains delay slots to which |
| instructions from the rest of the function can be "moved". The definition |
| should be a C expression whose value is an integer representing the number |
| of delay slots there. */ |
| /* #define DELAY_SLOTS_FOR_EPILOGUE */ |
| |
| /* A C expression that returns 1 if INSN can be placed in delay slot number N |
| of the epilogue. |
| |
| The argument N is an integer which identifies the delay slot now being |
| considered (since different slots may have different rules of eligibility). |
| It is never negative and is always less than the number of epilogue delay |
| slots (what `DELAY_SLOTS_FOR_EPILOGUE' returns). If you reject a particular |
| insn for a given delay slot, in principle, it may be reconsidered for a |
| subsequent delay slot. Also, other insns may (at least in principle) be |
| considered for the so far unfilled delay slot. |
| |
| The insns accepted to fill the epilogue delay slots are put in an |
| RTL list made with `insn_list' objects, stored in the variable |
| `current_function_epilogue_delay_list'. The insn for the first |
| delay slot comes first in the list. Your definition of the function |
| output_function_epilogue() should fill the delay slots by outputting the |
| insns in this list, usually by calling `final_scan_insn'. |
| |
| You need not define this macro if you did not define |
| `DELAY_SLOTS_FOR_EPILOGUE'. */ |
| /* #define ELIGIBLE_FOR_EPILOGUE_DELAY(INSN, N) */ |
| |
| /* A C compound statement that outputs the assembler code for a thunk function, |
| used to implement C++ virtual function calls with multiple inheritance. The |
| thunk acts as a wrapper around a virtual function, adjusting the implicit |
| object parameter before handing control off to the real function. |
| |
| First, emit code to add the integer DELTA to the location that contains the |
| incoming first argument. Assume that this argument contains a pointer, and |
| is the one used to pass the `this' pointer in C++. This is the incoming |
| argument *before* the function prologue, e.g. `%o0' on a sparc. The |
| addition must preserve the values of all other incoming arguments. |
| |
| After the addition, emit code to jump to FUNCTION, which is a |
| `FUNCTION_DECL'. This is a direct pure jump, not a call, and does not touch |
| the return address. Hence returning from FUNCTION will return to whoever |
| called the current `thunk'. |
| |
| The effect must be as if FUNCTION had been called directly with the |
| adjusted first argument. This macro is responsible for emitting |
| all of the code for a thunk function; output_function_prologue() |
| and output_function_epilogue() are not invoked. |
| |
| The THUNK_FNDECL is redundant. (DELTA and FUNCTION have already been |
| extracted from it.) It might possibly be useful on some targets, but |
| probably not. |
| |
| If you do not define this macro, the target-independent code in the C++ |
| frontend will generate a less efficient heavyweight thunk that calls |
| FUNCTION instead of jumping to it. The generic approach does not support |
| varargs. */ |
| /* #define ASM_OUTPUT_MI_THUNK(FILE, THUNK_FNDECL, DELTA, FUNCTION) */ |
| |
| /* A C structure for machine-specific, per-function data. |
| This is added to the cfun structure. */ |
| typedef struct machine_function |
| { |
| /* Additionsl stack adjustment in __builtin_eh_throw. */ |
| struct rtx_def * eh_epilogue_sp_ofs; |
| } machine_function; |
| |
| |
| /* Generating Code for Profiling. */ |
| |
| /* A C statement or compound statement to output to FILE some assembler code to |
| call the profiling subroutine `mcount'. Before calling, the assembler code |
| must load the address of a counter variable into a register where `mcount' |
| expects to find the address. The name of this variable is `LP' followed by |
| the number LABELNO, so you would generate the name using `LP%d' in a |
| `fprintf'. |
| |
| The details of how the address should be passed to `mcount' are determined |
| by your operating system environment, not by GNU CC. To figure them out, |
| compile a small program for profiling using the system's installed C |
| compiler and look at the assembler code that results. */ |
| |
| #define FUNCTION_PROFILER(FILE, LABELNO) d30v_function_profiler (FILE, LABELNO) |
| |
| /* Define this macro if the code for function profiling should come before the |
| function prologue. Normally, the profiling code comes after. */ |
| /* #define PROFILE_BEFORE_PROLOGUE */ |
| |
| |
| /* Implementing the Varargs Macros. */ |
| |
| /* If defined, is a C expression that produces the machine-specific code for a |
| call to `__builtin_saveregs'. This code will be moved to the very beginning |
| of the function, before any parameter access are made. The return value of |
| this function should be an RTX that contains the value to use as the return |
| of `__builtin_saveregs'. |
| |
| If this macro is not defined, the compiler will output an ordinary call to |
| the library function `__builtin_saveregs'. */ |
| |
| #define EXPAND_BUILTIN_SAVEREGS() d30v_expand_builtin_saveregs () |
| |
| /* This macro offers an alternative to using `__builtin_saveregs' and defining |
| the macro `EXPAND_BUILTIN_SAVEREGS'. Use it to store the anonymous register |
| arguments into the stack so that all the arguments appear to have been |
| passed consecutively on the stack. Once this is done, you can use the |
| standard implementation of varargs that works for machines that pass all |
| their arguments on the stack. |
| |
| The argument ARGS_SO_FAR is the `CUMULATIVE_ARGS' data structure, containing |
| the values that obtain after processing of the named arguments. The |
| arguments MODE and TYPE describe the last named argument--its machine mode |
| and its data type as a tree node. |
| |
| The macro implementation should do two things: first, push onto the stack |
| all the argument registers *not* used for the named arguments, and second, |
| store the size of the data thus pushed into the `int'-valued variable whose |
| name is supplied as the argument PRETEND_ARGS_SIZE. The value that you |
| store here will serve as additional offset for setting up the stack frame. |
| |
| Because you must generate code to push the anonymous arguments at compile |
| time without knowing their data types, `SETUP_INCOMING_VARARGS' is only |
| useful on machines that have just a single category of argument register and |
| use it uniformly for all data types. |
| |
| If the argument SECOND_TIME is nonzero, it means that the arguments of the |
| function are being analyzed for the second time. This happens for an inline |
| function, which is not actually compiled until the end of the source file. |
| The macro `SETUP_INCOMING_VARARGS' should not generate any instructions in |
| this case. */ |
| |
| #define SETUP_INCOMING_VARARGS(ARGS_SO_FAR, MODE, TYPE, PRETEND_ARGS_SIZE, SECOND_TIME) \ |
| d30v_setup_incoming_varargs (&ARGS_SO_FAR, (int) MODE, TYPE, \ |
| &PRETEND_ARGS_SIZE, SECOND_TIME) |
| |
| /* Define this macro if the location where a function argument is passed |
| depends on whether or not it is a named argument. |
| |
| This macro controls how the NAMED argument to `FUNCTION_ARG' is set for |
| varargs and stdarg functions. With this macro defined, the NAMED argument |
| is always true for named arguments, and false for unnamed arguments. If |
| this is not defined, but `SETUP_INCOMING_VARARGS' is defined, then all |
| arguments are treated as named. Otherwise, all named arguments except the |
| last are treated as named. */ |
| /* #define STRICT_ARGUMENT_NAMING */ |
| |
| /* Build up the stdarg/varargs va_list type tree, assinging it to NODE. If not |
| defined, it is assumed that va_list is a void * pointer. */ |
| |
| #define BUILD_VA_LIST_TYPE(VALIST) \ |
| (VALIST) = d30v_build_va_list () |
| |
| |
| /* Implement the stdarg/varargs va_start macro. STDARG_P is non-zero if this |
| is stdarg.h instead of varargs.h. VALIST is the tree of the va_list |
| variable to initialize. NEXTARG is the machine independent notion of the |
| 'next' argument after the variable arguments. If not defined, a standard |
| implementation will be defined that works for arguments passed on the stack. */ |
| |
| #define EXPAND_BUILTIN_VA_START(STDARG_P, VALIST, NEXTARG) \ |
| (d30v_expand_builtin_va_start(STDARG_P, VALIST, NEXTARG)) |
| |
| /* Implement the stdarg/varargs va_arg macro. VALIST is the variable of type |
| va_list as a tree, TYPE is the type passed to va_arg. */ |
| |
| #define EXPAND_BUILTIN_VA_ARG(VALIST, TYPE) \ |
| (d30v_expand_builtin_va_arg (VALIST, TYPE)) |
| |
| /* Implement the stdarg/varargs va_end macro. |
| VALIST is the variable of type va_list as a tree. */ |
| |
| /* #define EXPAND_BUILTIN_VA_END(VALIST) */ |
| |
| |
| |
| /* Trampolines for Nested Functions. */ |
| |
| /* A C statement to output, on the stream FILE, assembler code for a block of |
| data that contains the constant parts of a trampoline. This code should not |
| include a label--the label is taken care of automatically. */ |
| /* #define TRAMPOLINE_TEMPLATE(FILE) d30v_trampoline_template (FILE) */ |
| |
| /* The name of a subroutine to switch to the section in which the trampoline |
| template is to be placed (*note Sections::.). The default is a value of |
| `readonly_data_section', which places the trampoline in the section |
| containing read-only data. */ |
| /* #define TRAMPOLINE_SECTION */ |
| |
| /* A C expression for the size in bytes of the trampoline, as an integer. */ |
| #define TRAMPOLINE_SIZE (d30v_trampoline_size ()) |
| |
| /* Alignment required for trampolines, in bits. |
| |
| If you don't define this macro, the value of `BIGGEST_ALIGNMENT' is used for |
| aligning trampolines. */ |
| #define TRAMPOLINE_ALIGNMENT 64 |
| |
| /* A C statement to initialize the variable parts of a trampoline. ADDR is an |
| RTX for the address of the trampoline; FNADDR is an RTX for the address of |
| the nested function; STATIC_CHAIN is an RTX for the static chain value that |
| should be passed to the function when it is called. */ |
| #define INITIALIZE_TRAMPOLINE(ADDR, FNADDR, STATIC_CHAIN) \ |
| d30v_initialize_trampoline (ADDR, FNADDR, STATIC_CHAIN) |
| |
| /* A C expression to allocate run-time space for a trampoline. The expression |
| value should be an RTX representing a memory reference to the space for the |
| trampoline. |
| |
| If this macro is not defined, by default the trampoline is allocated as a |
| stack slot. This default is right for most machines. The exceptions are |
| machines where it is impossible to execute instructions in the stack area. |
| On such machines, you may have to implement a separate stack, using this |
| macro in conjunction with output_function_prologue () and |
| output_function_epilogue (). |
| |
| FP points to a data structure, a `struct function', which describes the |
| compilation status of the immediate containing function of the function |
| which the trampoline is for. Normally (when `ALLOCATE_TRAMPOLINE' is not |
| defined), the stack slot for the trampoline is in the stack frame of this |
| containing function. Other allocation strategies probably must do something |
| analogous with this information. */ |
| /* #define ALLOCATE_TRAMPOLINE(FP) */ |
| |
| /* Implementing trampolines is difficult on many machines because they have |
| separate instruction and data caches. Writing into a stack location fails |
| to clear the memory in the instruction cache, so when the program jumps to |
| that location, it executes the old contents. |
| |
| Here are two possible solutions. One is to clear the relevant parts of the |
| instruction cache whenever a trampoline is set up. The other is to make all |
| trampolines identical, by having them jump to a standard subroutine. The |
| former technique makes trampoline execution faster; the latter makes |
| initialization faster. |
| |
| To clear the instruction cache when a trampoline is initialized, define the |
| following macros which describe the shape of the cache. */ |
| |
| /* The total size in bytes of the cache. */ |
| /* #define INSN_CACHE_SIZE */ |
| |
| /* The length in bytes of each cache line. The cache is divided into cache |
| lines which are disjoint slots, each holding a contiguous chunk of data |
| fetched from memory. Each time data is brought into the cache, an entire |
| line is read at once. The data loaded into a cache line is always aligned |
| on a boundary equal to the line size. */ |
| /* #define INSN_CACHE_LINE_WIDTH */ |
| |
| /* The number of alternative cache lines that can hold any particular memory |
| location. */ |
| /* #define INSN_CACHE_DEPTH */ |
| |
| /* Alternatively, if the machine has system calls or instructions to clear the |
| instruction cache directly, you can define the following macro. */ |
| |
| /* If defined, expands to a C expression clearing the *instruction cache* in |
| the specified interval. If it is not defined, and the macro INSN_CACHE_SIZE |
| is defined, some generic code is generated to clear the cache. The |
| definition of this macro would typically be a series of `asm' statements. |
| Both BEG and END are both pointer expressions. */ |
| /* #define CLEAR_INSN_CACHE (BEG, END) */ |
| |
| /* To use a standard subroutine, define the following macro. In addition, you |
| must make sure that the instructions in a trampoline fill an entire cache |
| line with identical instructions, or else ensure that the beginning of the |
| trampoline code is always aligned at the same point in its cache line. Look |
| in `m68k.h' as a guide. */ |
| |
| /* Define this macro if trampolines need a special subroutine to do their work. |
| The macro should expand to a series of `asm' statements which will be |
| compiled with GNU CC. They go in a library function named |
| `__transfer_from_trampoline'. |
| |
| If you need to avoid executing the ordinary prologue code of a compiled C |
| function when you jump to the subroutine, you can do so by placing a special |
| label of your own in the assembler code. Use one `asm' statement to |
| generate an assembler label, and another to make the label global. Then |
| trampolines can use that label to jump directly to your special assembler |
| code. */ |
| /* #define TRANSFER_FROM_TRAMPOLINE */ |
| |
| |
| /* Implicit Calls to Library Routines */ |
| |
| /* A C string constant giving the name of the function to call for |
| multiplication of one signed full-word by another. If you do not define |
| this macro, the default name is used, which is `__mulsi3', a function |
| defined in `libgcc.a'. */ |
| /* #define MULSI3_LIBCALL */ |
| |
| /* A C string constant giving the name of the function to call for division of |
| one signed full-word by another. If you do not define this macro, the |
| default name is used, which is `__divsi3', a function defined in `libgcc.a'. */ |
| /* #define DIVSI3_LIBCALL */ |
| |
| /* A C string constant giving the name of the function to call for division of |
| one unsigned full-word by another. If you do not define this macro, the |
| default name is used, which is `__udivsi3', a function defined in |
| `libgcc.a'. */ |
| /* #define UDIVSI3_LIBCALL */ |
| |
| /* A C string constant giving the name of the function to call for the |
| remainder in division of one signed full-word by another. If you do not |
| define this macro, the default name is used, which is `__modsi3', a function |
| defined in `libgcc.a'. */ |
| /* #define MODSI3_LIBCALL */ |
| |
| /* A C string constant giving the name of the function to call for the |
| remainder in division of one unsigned full-word by another. If you do not |
| define this macro, the default name is used, which is `__umodsi3', a |
| function defined in `libgcc.a'. */ |
| /* #define UMODSI3_LIBCALL */ |
| |
| /* A C string constant giving the name of the function to call for |
| multiplication of one signed double-word by another. If you do not define |
| this macro, the default name is used, which is `__muldi3', a function |
| defined in `libgcc.a'. */ |
| /* #define MULDI3_LIBCALL */ |
| |
| /* A C string constant giving the name of the function to call for division of |
| one signed double-word by another. If you do not define this macro, the |
| default name is used, which is `__divdi3', a function defined in `libgcc.a'. */ |
| /* #define DIVDI3_LIBCALL */ |
| |
| /* A C string constant giving the name of the function to call for division of |
| one unsigned full-word by another. If you do not define this macro, the |
| default name is used, which is `__udivdi3', a function defined in |
| `libgcc.a'. */ |
| /* #define UDIVDI3_LIBCALL */ |
| |
| /* A C string constant giving the name of the function to call for the |
| remainder in division of one signed double-word by another. If you do not |
| define this macro, the default name is used, which is `__moddi3', a function |
| defined in `libgcc.a'. */ |
| /* #define MODDI3_LIBCALL */ |
| |
| /* A C string constant giving the name of the function to call for the |
| remainder in division of one unsigned full-word by another. If you do not |
| define this macro, the default name is used, which is `__umoddi3', a |
| function defined in `libgcc.a'. */ |
| /* #define UMODDI3_LIBCALL */ |
| |
| /* Define this macro as a C statement that declares additional library routines |
| renames existing ones. `init_optabs' calls this macro after initializing all |
| the normal library routines. */ |
| /* #define INIT_TARGET_OPTABS */ |
| |
| /* The value of `EDOM' on the target machine, as a C integer constant |
| expression. If you don't define this macro, GNU CC does not attempt to |
| deposit the value of `EDOM' into `errno' directly. Look in |
| `/usr/include/errno.h' to find the value of `EDOM' on your system. |
| |
| If you do not define `TARGET_EDOM', then compiled code reports domain errors |
| by calling the library function and letting it report the error. If |
| mathematical functions on your system use `matherr' when there is an error, |
| then you should leave `TARGET_EDOM' undefined so that `matherr' is used |
| normally. */ |
| /* #define TARGET_EDOM */ |
| |
| /* Define this macro as a C expression to create an rtl expression that refers |
| to the global "variable" `errno'. (On certain systems, `errno' may not |
| actually be a variable.) If you don't define this macro, a reasonable |
| default is used. */ |
| /* #define GEN_ERRNO_RTX */ |
| |
| /* Define this macro if GNU CC should generate calls to the System V (and ANSI |
| C) library functions `memcpy' and `memset' rather than the BSD functions |
| `bcopy' and `bzero'. |
| |
| Defined in svr4.h. */ |
| /* #define TARGET_MEM_FUNCTIONS */ |
| |
| /* Define this macro to generate code for Objective C message sending using the |
| calling convention of the NeXT system. This calling convention involves |
| passing the object, the selector and the method arguments all at once to the |
| method-lookup library function. |
| |
| The default calling convention passes just the object and the selector to |
| the lookup function, which returns a pointer to the method. */ |
| /* #define NEXT_OBJC_RUNTIME */ |
| |
| |
| /* Addressing Modes */ |
| |
| /* Define this macro if the machine supports post-increment addressing. */ |
| #define HAVE_POST_INCREMENT 1 |
| |
| /* Similar for other kinds of addressing. */ |
| /* #define HAVE_PRE_INCREMENT 0 */ |
| #define HAVE_POST_DECREMENT 1 |
| /* #define HAVE_PRE_DECREMENT 0 */ |
| |
| /* A C expression that is 1 if the RTX X is a constant which is a valid |
| address. On most machines, this can be defined as `CONSTANT_P (X)', but a |
| few machines are more restrictive in which constant addresses are supported. |
| |
| `CONSTANT_P' accepts integer-values expressions whose values are not |
| explicitly known, such as `symbol_ref', `label_ref', and `high' expressions |
| and `const' arithmetic expressions, in addition to `const_int' and |
| `const_double' expressions. */ |
| #define CONSTANT_ADDRESS_P(X) CONSTANT_P (X) |
| |
| /* A number, the maximum number of registers that can appear in a valid memory |
| address. Note that it is up to you to specify a value equal to the maximum |
| number that `GO_IF_LEGITIMATE_ADDRESS' would ever accept. */ |
| #define MAX_REGS_PER_ADDRESS 2 |
| |
| /* A C compound statement with a conditional `goto LABEL;' executed if X (an |
| RTX) is a legitimate memory address on the target machine for a memory |
| operand of mode MODE. |
| |
| It usually pays to define several simpler macros to serve as subroutines for |
| this one. Otherwise it may be too complicated to understand. |
| |
| This macro must exist in two variants: a strict variant and a non-strict |
| one. The strict variant is used in the reload pass. It must be defined so |
| that any pseudo-register that has not been allocated a hard register is |
| considered a memory reference. In contexts where some kind of register is |
| required, a pseudo-register with no hard register must be rejected. |
| |
| The non-strict variant is used in other passes. It must be defined to |
| accept all pseudo-registers in every context where some kind of register is |
| required. |
| |
| Compiler source files that want to use the strict variant of this macro |
| define the macro `REG_OK_STRICT'. You should use an `#ifdef REG_OK_STRICT' |
| conditional to define the strict variant in that case and the non-strict |
| variant otherwise. |
| |
| Subroutines to check for acceptable registers for various purposes (one for |
| base registers, one for index registers, and so on) are typically among the |
| subroutines used to define `GO_IF_LEGITIMATE_ADDRESS'. Then only these |
| subroutine macros need have two variants; the higher levels of macros may be |
| the same whether strict or not. |
| |
| Normally, constant addresses which are the sum of a `symbol_ref' and an |
| integer are stored inside a `const' RTX to mark them as constant. |
| Therefore, there is no need to recognize such sums specifically as |
| legitimate addresses. Normally you would simply recognize any `const' as |
| legitimate. |
| |
| Usually `PRINT_OPERAND_ADDRESS' is not prepared to handle constant sums that |
| are not marked with `const'. It assumes that a naked `plus' indicates |
| indexing. If so, then you *must* reject such naked constant sums as |
| illegitimate addresses, so that none of them will be given to |
| `PRINT_OPERAND_ADDRESS'. |
| |
| On some machines, whether a symbolic address is legitimate depends on the |
| section that the address refers to. On these machines, define the macro |
| `ENCODE_SECTION_INFO' to store the information into the `symbol_ref', and |
| then check for it here. When you see a `const', you will have to look |
| inside it to find the `symbol_ref' in order to determine the section. *Note |
| Assembler Format::. |
| |
| The best way to modify the name string is by adding text to the beginning, |
| with suitable punctuation to prevent any ambiguity. Allocate the new name |
| in `saveable_obstack'. You will have to modify `ASM_OUTPUT_LABELREF' to |
| remove and decode the added text and output the name accordingly, and define |
| `STRIP_NAME_ENCODING' to access the original name string. |
| |
| You can check the information stored here into the `symbol_ref' in the |
| definitions of the macros `GO_IF_LEGITIMATE_ADDRESS' and |
| `PRINT_OPERAND_ADDRESS'. */ |
| |
| #ifdef REG_OK_STRICT |
| #define REG_OK_STRICT_P 1 |
| #else |
| #define REG_OK_STRICT_P 0 |
| #endif |
| |
| #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ |
| do { \ |
| if (d30v_legitimate_address_p ((int)MODE, X, REG_OK_STRICT_P)) \ |
| goto ADDR; \ |
| } while (0) |
| |
| /* A C expression that is nonzero if X (assumed to be a `reg' RTX) is valid for |
| use as a base register. For hard registers, it should always accept those |
| which the hardware permits and reject the others. Whether the macro accepts |
| or rejects pseudo registers must be controlled by `REG_OK_STRICT' as |
| described above. This usually requires two variant definitions, of which |
| `REG_OK_STRICT' controls the one actually used. */ |
| |
| #ifdef REG_OK_STRICT |
| #define REG_OK_FOR_BASE_P(X) (GPR_P (REGNO (X))) |
| #else |
| #define REG_OK_FOR_BASE_P(X) (GPR_OR_PSEUDO_P (REGNO (X))) |
| #endif |
| |
| /* A C expression that is nonzero if X (assumed to be a `reg' RTX) is valid for |
| use as an index register. |
| |
| The difference between an index register and a base register is that the |
| index register may be scaled. If an address involves the sum of two |
| registers, neither one of them scaled, then either one may be labeled the |
| "base" and the other the "index"; but whichever labeling is used must fit |
| the machine's constraints of which registers may serve in each capacity. |
| The compiler will try both labelings, looking for one that is valid, and |
| will reload one or both registers only if neither labeling works. */ |
| |
| #define REG_OK_FOR_INDEX_P(X) REG_OK_FOR_BASE_P (X) |
| |
| /* A C compound statement that attempts to replace X with a valid memory |
| address for an operand of mode MODE. WIN will be a C statement label |
| elsewhere in the code; the macro definition may use |
| |
| GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN); |
| |
| to avoid further processing if the address has become legitimate. |
| |
| X will always be the result of a call to `break_out_memory_refs', and OLDX |
| will be the operand that was given to that function to produce X. |
| |
| The code generated by this macro should not alter the substructure of X. If |
| it transforms X into a more legitimate form, it should assign X (which will |
| always be a C variable) a new value. |
| |
| It is not necessary for this macro to come up with a legitimate address. |
| The compiler has standard ways of doing so in all cases. In fact, it is |
| safe for this macro to do nothing. But often a machine-dependent strategy |
| can generate better code. */ |
| |
| #define LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \ |
| do { \ |
| rtx y = d30v_legitimize_address (X, OLDX, (int)MODE, REG_OK_STRICT_P); \ |
| if (y) \ |
| { \ |
| X = y; \ |
| GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN); \ |
| } \ |
| } while (0) |
| |
| /* A C statement or compound statement with a conditional `goto LABEL;' |
| executed if memory address X (an RTX) can have different meanings depending |
| on the machine mode of the memory reference it is used for or if the address |
| is valid for some modes but not others. |
| |
| Autoincrement and autodecrement addresses typically have mode-dependent |
| effects because the amount of the increment or decrement is the size of the |
| operand being addressed. Some machines have other mode-dependent addresses. |
| Many RISC machines have no mode-dependent addresses. |
| |
| You may assume that ADDR is a valid address for the machine. */ |
| |
| #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR, LABEL) \ |
| do { \ |
| if (d30v_mode_dependent_address_p (ADDR)) \ |
| goto LABEL; \ |
| } while (0) \ |
| |
| /* A C expression that is nonzero if X is a legitimate constant for an |
| immediate operand on the target machine. You can assume that X satisfies |
| `CONSTANT_P', so you need not check this. In fact, `1' is a suitable |
| definition for this macro on machines where anything `CONSTANT_P' is valid. */ |
| #define LEGITIMATE_CONSTANT_P(X) 1 |
| |
| |
| /* Condition Code Status */ |
| |
| /* C code for a data type which is used for declaring the `mdep' component of |
| `cc_status'. It defaults to `int'. |
| |
| This macro is not used on machines that do not use `cc0'. */ |
| /* #define CC_STATUS_MDEP */ |
| |
| /* A C expression to initialize the `mdep' field to "empty". The default |
| definition does nothing, since most machines don't use the field anyway. If |
| you want to use the field, you should probably define this macro to |
| initialize it. |
| |
| This macro is not used on machines that do not use `cc0'. */ |
| /* #define CC_STATUS_MDEP_INIT */ |
| |
| /* A C compound statement to set the components of `cc_status' appropriately |
| for an insn INSN whose body is EXP. It is this macro's responsibility to |
| recognize insns that set the condition code as a byproduct of other activity |
| as well as those that explicitly set `(cc0)'. |
| |
| This macro is not used on machines that do not use `cc0'. |
| |
| If there are insns that do not set the condition code but do alter other |
| machine registers, this macro must check to see whether they invalidate the |
| expressions that the condition code is recorded as reflecting. For example, |
| on the 68000, insns that store in address registers do not set the condition |
| code, which means that usually `NOTICE_UPDATE_CC' can leave `cc_status' |
| unaltered for such insns. But suppose that the previous insn set the |
| condition code based on location `a4@(102)' and the current insn stores a |
| new value in `a4'. Although the condition code is not changed by this, it |
| will no longer be true that it reflects the contents of `a4@(102)'. |
| Therefore, `NOTICE_UPDATE_CC' must alter `cc_status' in this case to say |
| that nothing is known about the condition code value. |
| |
| The definition of `NOTICE_UPDATE_CC' must be prepared to deal with the |
| results of peephole optimization: insns whose patterns are `parallel' RTXs |
| containing various `reg', `mem' or constants which are just the operands. |
| The RTL structure of these insns is not sufficient to indicate what the |
| insns actually do. What `NOTICE_UPDATE_CC' should do when it sees one is |
| just to run `CC_STATUS_INIT'. |
| |
| A possible definition of `NOTICE_UPDATE_CC' is to call a function that looks |
| at an attribute (*note Insn Attributes::.) named, for example, `cc'. This |
| avoids having detailed information about patterns in two places, the `md' |
| file and in `NOTICE_UPDATE_CC'. */ |
| /* #define NOTICE_UPDATE_CC(EXP, INSN) */ |
| |
| /* A list of names to be used for additional modes for condition code values in |
| registers (*note Jump Patterns::.). These names are added to `enum |
| machine_mode' and all have class `MODE_CC'. By convention, they should |
| start with `CC' and end with `mode'. |
| |
| You should only define this macro if your machine does not use `cc0' and |
| only if additional modes are required. */ |
| /* #define EXTRA_CC_MODES */ |
| |
| /* Returns a mode from class `MODE_CC' to be used when comparison operation |
| code OP is applied to rtx X and Y. For example, on the Sparc, |
| `SELECT_CC_MODE' is defined as (see *note Jump Patterns::. for a |
| description of the reason for this definition) |
| |
| #define SELECT_CC_MODE(OP,X,Y) \ |
| (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT \ |
| ? ((OP == EQ || OP == NE) ? CCFPmode : CCFPEmode) \ |
| : ((GET_CODE (X) == PLUS || GET_CODE (X) == MINUS \ |
| || GET_CODE (X) == NEG) \ |
| ? CC_NOOVmode : CCmode)) |
| |
| You need not define this macro if `EXTRA_CC_MODES' is not defined. */ |
| /* #define SELECT_CC_MODE(OP, X, Y) */ |
| |
| /* One some machines not all possible comparisons are defined, but you can |
| convert an invalid comparison into a valid one. For example, the Alpha does |
| not have a `GT' comparison, but you can use an `LT' comparison instead and |
| swap the order of the operands. |
| |
| On such machines, define this macro to be a C statement to do any required |
| conversions. CODE is the initial comparison code and OP0 and OP1 are the |
| left and right operands of the comparison, respectively. You should modify |
| CODE, OP0, and OP1 as required. |
| |
| GNU CC will not assume that the comparison resulting from this macro is |
| valid but will see if the resulting insn matches a pattern in the `md' file. |
| |
| You need not define this macro if it would never change the comparison code |
| or operands. */ |
| /* #define CANONICALIZE_COMPARISON(CODE, OP0, OP1) */ |
| |
| /* A C expression whose value is one if it is always safe to reverse a |
| comparison whose mode is MODE. If `SELECT_CC_MODE' can ever return MODE for |
| a floating-point inequality comparison, then `REVERSIBLE_CC_MODE (MODE)' |
| must be zero. |
| |
| You need not define this macro if it would always returns zero or if the |
| floating-point format is anything other than `IEEE_FLOAT_FORMAT'. For |
| example, here is the definition used on the Sparc, where floating-point |
| inequality comparisons are always given `CCFPEmode': |
| |
| #define REVERSIBLE_CC_MODE(MODE) ((MODE) != CCFPEmode) */ |
| /* #define REVERSIBLE_CC_MODE(MODE) */ |
| |
| |
| /* Describing Relative Costs of Operations */ |
| |
| /* A part of a C `switch' statement that describes the relative costs of |
| constant RTL expressions. It must contain `case' labels for expression |
| codes `const_int', `const', `symbol_ref', `label_ref' and `const_double'. |
| Each case must ultimately reach a `return' statement to return the relative |
| cost of the use of that kind of constant value in an expression. The cost |
| may depend on the precise value of the constant, which is available for |
| examination in X, and the rtx code of the expression in which it is |
| contained, found in OUTER_CODE. |
| |
| CODE is the expression code--redundant, since it can be obtained with |
| `GET_CODE (X)'. */ |
| |
| /* On the d30v, consider operatnds that fit in a short instruction very |
| cheap. However, at this time, it causes cse to generate incorrect |
| code, so disable it for now. */ |
| #if 0 |
| #define CONST_COSTS(X, CODE, OUTER_CODE) \ |
| case CONST_INT: \ |
| if (IN_RANGE_P (INTVAL (X), 0, 31)) \ |
| return 0; \ |
| else if ((OUTER_CODE) == LEU && (OUTER_CODE) == LTU \ |
| && (OUTER_CODE) == GEU && (OUTER_CODE) == GTU) \ |
| return IN_RANGE_P (INTVAL (X), 32, 63) ? 0 : COSTS_N_INSNS (2); \ |
| else \ |
| return IN_RANGE_P (INTVAL (X), -31, -1) ? 0 : COSTS_N_INSNS (2); \ |
| case SYMBOL_REF: \ |
| case LABEL_REF: \ |
| case CONST: \ |
| return COSTS_N_INSNS (2); \ |
| case CONST_DOUBLE: \ |
| return COSTS_N_INSNS ((GET_MODE (X) == SFmode) ? 2 : 4); |
| #else |
| #define CONST_COSTS(X, CODE, OUTER_CODE) |
| #endif |
| |
| /* Like `CONST_COSTS' but applies to nonconstant RTL expressions. This can be |
| used, for example, to indicate how costly a multiply instruction is. In |
| writing this macro, you can use the construct `COSTS_N_INSNS (N)' to specify |
| a cost equal to N fast instructions. OUTER_CODE is the code of the |
| expression in which X is contained. |
| |
| This macro is optional; do not define it if the default cost assumptions are |
| adequate for the target machine. */ |
| #define RTX_COSTS(X, CODE, OUTER_CODE) \ |
| case MULT: \ |
| return COSTS_N_INSNS ((GET_CODE (XEXP (x, 1)) == CONST_INT \ |
| && exact_log2 (INTVAL (XEXP (x, 1))) >= 0) \ |
| ? 1 : 2); |
| |
| /* An expression giving the cost of an addressing mode that contains ADDRESS. |
| If not defined, the cost is computed from the ADDRESS expression and the |
| `CONST_COSTS' values. |
| |
| For most CISC machines, the default cost is a good approximation of the true |
| cost of the addressing mode. However, on RISC machines, all instructions |
| normally have the same length and execution time. Hence all addresses will |
| have equal costs. |
| |
| In cases where more than one form of an address is known, the form with the |
| lowest cost will be used. If multiple forms have the same, lowest, cost, |
| the one that is the most complex will be used. |
| |
| For example, suppose an address that is equal to the sum of a register and a |
| constant is used twice in the same basic block. When this macro is not |
| defined, the address will be computed in a register and memory references |
| will be indirect through that register. On machines where the cost of the |
| addressing mode containing the sum is no higher than that of a simple |
| indirect reference, this will produce an additional instruction and possibly |
| require an additional register. Proper specification of this macro |
| eliminates this overhead for such machines. |
| |
| Similar use of this macro is made in strength reduction of loops. |
| |
| ADDRESS need not be valid as an address. In such a case, the cost is not |
| relevant and can be any value; invalid addresses need not be assigned a |
| different cost. |
| |
| On machines where an address involving more than one register is as cheap as |
| an address computation involving only one register, defining `ADDRESS_COST' |
| to reflect this can cause two registers to be live over a region of code |
| where only one would have been if `ADDRESS_COST' were not defined in that |
| manner. This effect should be considered in the definition of this macro. |
| Equivalent costs should probably only be given to addresses with different |
| numbers of registers on machines with lots of registers. |
| |
| This macro will normally either not be defined or be defined as a constant. */ |
| #define ADDRESS_COST(ADDRESS) 0 |
| |
| /* A C expression for the cost of moving data from a register in class FROM to |
| one in class TO. The classes are expressed using the enumeration values |
| such as `GENERAL_REGS'. A value of 4 is the default; other values are |
| interpreted relative to that. |
| |
| It is not required that the cost always equal 2 when FROM is the same as TO; |
| on some machines it is expensive to move between registers if they are not |
| general registers. |
| |
| If reload sees an insn consisting of a single `set' between two hard |
| registers, and if `REGISTER_MOVE_COST' applied to their classes returns a |
| value of 2, reload does not check to ensure that the constraints of the insn |
| are met. Setting a cost of other than 2 will allow reload to verify that |
| the constraints are met. You should do this if the `movM' pattern's |
| constraints do not allow such copying. */ |
| |
| #define REGISTER_MOVE_COST(MODE, FROM, TO) \ |
| (((FROM) != GPR_REGS && (FROM) != EVEN_REGS \ |
| && (TO) != GPR_REGS && (TO) != EVEN_REGS) ? 4 : 2) |
| |
| /* A C expression for the cost of moving data of mode M between a register and |
| memory. A value of 2 is the default; this cost is relative to those in |
| `REGISTER_MOVE_COST'. |
| |
| If moving between registers and memory is more expensive than between two |
| registers, you should define this macro to express the relative cost. */ |
| #define MEMORY_MOVE_COST(M,C,I) 4 |
| |
| /* A C expression for the cost of a branch instruction. A value of 1 is the |
| default; other values are interpreted relative to that. */ |
| |
| #define BRANCH_COST d30v_branch_cost |
| |
| #define D30V_DEFAULT_BRANCH_COST 2 |
| |
| /* Values of the -mbranch-cost=n string. */ |
| extern int d30v_branch_cost; |
| extern const char *d30v_branch_cost_string; |
| |
| /* Here are additional macros which do not specify precise relative costs, but |
| only that certain actions are more expensive than GNU CC would ordinarily |
| expect. */ |
| |
| /* Define this macro as a C expression which is nonzero if accessing less than |
| a word of memory (i.e. a `char' or a `short') is no faster than accessing a |
| word of memory, i.e., if such access require more than one instruction or if |
| there is no difference in cost between byte and (aligned) word loads. |
| |
| When this macro is not defined, the compiler will access a field by finding |
| the smallest containing object; when it is defined, a fullword load will be |
| used if alignment permits. Unless bytes accesses are faster than word |
| accesses, using word accesses is preferable since it may eliminate |
| subsequent memory access if subsequent accesses occur to other fields in the |
| same word of the structure, but to different bytes. */ |
| #define SLOW_BYTE_ACCESS 1 |
| |
| /* Define this macro to be the value 1 if unaligned accesses have a cost many |
| times greater than aligned accesses, for example if they are emulated in a |
| trap handler. |
| |
| When this macro is non-zero, the compiler will act as if `STRICT_ALIGNMENT' |
| were non-zero when generating code for block moves. This can cause |
| significantly more instructions to be produced. Therefore, do not set this |
| macro non-zero if unaligned accesses only add a cycle or two to the time for |
| a memory access. |
| |
| If the value of this macro is always zero, it need not be defined. */ |
| /* #define SLOW_UNALIGNED_ACCESS */ |
| |
| /* Define this macro to inhibit strength reduction of memory addresses. (On |
| some machines, such strength reduction seems to do harm rather than good.) */ |
| /* #define DONT_REDUCE_ADDR */ |
| |
| /* The number of scalar move insns which should be generated instead of a |
| string move insn or a library call. Increasing the value will always make |
| code faster, but eventually incurs high cost in increased code size. |
| |
| If you don't define this, a reasonable default is used. */ |
| /* #define MOVE_RATIO */ |
| |
| /* Define this macro if it is as good or better to call a constant function |
| address than to call an address kept in a register. */ |
| #define NO_FUNCTION_CSE |
| |
| /* Define this macro if it is as good or better for a function to call itself |
| with an explicit address than to call an address kept in a register. */ |
| /* #define NO_RECURSIVE_FUNCTION_CSE */ |
| |
| |
| /* Dividing the output into sections. */ |
| |
| /* A C expression whose value is a string containing the assembler operation |
| that should precede instructions and read-only data. Normally `".text"' is |
| right. */ |
| #define TEXT_SECTION_ASM_OP "\t.text" |
| |
| /* A C expression whose value is a string containing the assembler operation to |
| identify the following data as writable initialized data. Normally |
| `".data"' is right. */ |
| #define DATA_SECTION_ASM_OP "\t.data" |
| |
| /* if defined, a C expression whose value is a string containing the assembler |
| operation to identify the following data as shared data. If not defined, |
| `DATA_SECTION_ASM_OP' will be used. */ |
| /* #define SHARED_SECTION_ASM_OP */ |
| |
| /* If defined, a C expression whose value is a string containing the |
| assembler operation to identify the following data as |
| uninitialized global data. If not defined, and neither |
| `ASM_OUTPUT_BSS' nor `ASM_OUTPUT_ALIGNED_BSS' are defined, |
| uninitialized global data will be output in the data section if |
| `-fno-common' is passed, otherwise `ASM_OUTPUT_COMMON' will be |
| used. */ |
| #define BSS_SECTION_ASM_OP "\t.bss" |
| |
| /* If defined, a C expression whose value is a string containing the |
| assembler operation to identify the following data as |
| uninitialized global shared data. If not defined, and |
| `BSS_SECTION_ASM_OP' is, the latter will be used. */ |
| /* #define SHARED_BSS_SECTION_ASM_OP */ |
| |
| /* A list of names for sections other than the standard two, which are |
| `in_text' and `in_data'. You need not define this macro on a system with no |
| other sections (that GCC needs to use). |
| |
| Defined in svr4.h. */ |
| /* #define EXTRA_SECTIONS */ |
| |
| /* One or more functions to be defined in `varasm.c'. These functions should |
| do jobs analogous to those of `text_section' and `data_section', for your |
| additional sections. Do not define this macro if you do not define |
| `EXTRA_SECTIONS'. |
| |
| Defined in svr4.h. */ |
| /* #define EXTRA_SECTION_FUNCTIONS */ |
| |
| /* On most machines, read-only variables, constants, and jump tables are placed |
| in the text section. If this is not the case on your machine, this macro |
| should be defined to be the name of a function (either `data_section' or a |
| function defined in `EXTRA_SECTIONS') that switches to the section to be |
| used for read-only items. |
| |
| If these items should be placed in the text section, this macro should not |
| be defined. */ |
| /* #define READONLY_DATA_SECTION */ |
| |
| /* A C statement or statements to switch to the appropriate section for output |
| of EXP. You can assume that EXP is either a `VAR_DECL' node or a constant |
| of some sort. RELOC indicates whether the initial value of EXP requires |
| link-time relocations. Select the section by calling `text_section' or one |
| of the alternatives for other sections. |
| |
| Do not define this macro if you put all read-only variables and constants in |
| the read-only data section (usually the text section). |
| |
| Defined in svr4.h. */ |
| /* #define SELECT_SECTION(EXP, RELOC, ALIGN) */ |
| |
| /* A C statement or statements to switch to the appropriate section for output |
| of RTX in mode MODE. You can assume that RTX is some kind of constant in |
| RTL. The argument MODE is redundant except in the case of a `const_int' |
| rtx. Select the section by calling `text_section' or one of the |
| alternatives for other sections. |
| |
| Do not define this macro if you put all constants in the read-only data |
| section. |
| |
| Defined in svr4.h. */ |
| /* #define SELECT_RTX_SECTION(MODE, RTX, ALIGN) */ |
| |
| /* Define this macro if jump tables (for `tablejump' insns) should be output in |
| the text section, along with the assembler instructions. Otherwise, the |
| readonly data section is used. |
| |
| This macro is irrelevant if there is no separate readonly data section. */ |
| /* #define JUMP_TABLES_IN_TEXT_SECTION */ |
| |
| /* Decode SYM_NAME and store the real name part in VAR, sans the characters |
| that encode section info. Define this macro if `ENCODE_SECTION_INFO' alters |
| the symbol's name string. */ |
| /* #define STRIP_NAME_ENCODING(VAR, SYM_NAME) */ |
| |
| /* A C statement to build up a unique section name, expressed as a |
| STRING_CST node, and assign it to `DECL_SECTION_NAME (DECL)'. |
| RELOC indicates whether the initial value of EXP requires |
| link-time relocations. If you do not define this macro, GNU CC |
| will use the symbol name prefixed by `.' as the section name. |
| |
| Defined in svr4.h. */ |
| /* #define UNIQUE_SECTION(DECL, RELOC) */ |
| |
| |
| /* Position Independent Code. */ |
| |
| /* The register number of the register used to address a table of static data |
| addresses in memory. In some cases this register is defined by a |
| processor's "application binary interface" (ABI). When this macro is |
| defined, RTL is generated for this register once, as with the stack pointer |
| and frame pointer registers. If this macro is not defined, it is up to the |
| machine-dependent files to allocate such a register (if necessary). */ |
| /* #define PIC_OFFSET_TABLE_REGNUM */ |
| |
| /* Define this macro if the register defined by `PIC_OFFSET_TABLE_REGNUM' is |
| clobbered by calls. Do not define this macro if `PIC_OFFSET_TABLE_REGNUM' |
| is not defined. */ |
| /* #define PIC_OFFSET_TABLE_REG_CALL_CLOBBERED */ |
| |
| /* By generating position-independent code, when two different programs (A and |
| B) share a common library (libC.a), the text of the library can be shared |
| whether or not the library is linked at the same address for both programs. |
| In some of these environments, position-independent code requires not only |
| the use of different addressing modes, but also special code to enable the |
| use of these addressing modes. |
| |
| The `FINALIZE_PIC' macro serves as a hook to emit these special codes once |
| the function is being compiled into assembly code, but not before. (It is |
| not done before, because in the case of compiling an inline function, it |
| would lead to multiple PIC prologues being included in functions which used |
| inline functions and were compiled to assembly language.) */ |
| /* #define FINALIZE_PIC */ |
| |
| /* A C expression that is nonzero if X is a legitimate immediate operand on the |
| target machine when generating position independent code. You can assume |
| that X satisfies `CONSTANT_P', so you need not check this. You can also |
| assume FLAG_PIC is true, so you need not check it either. You need not |
| define this macro if all constants (including `SYMBOL_REF') can be immediate |
| operands when generating position independent code. */ |
| /* #define LEGITIMATE_PIC_OPERAND_P(X) */ |
| |
| |
| /* The Overall Framework of an Assembler File. */ |
| |
| /* A C expression which outputs to the stdio stream STREAM some appropriate |
| text to go at the start of an assembler file. |
| |
| Normally this macro is defined to output a line containing `#NO_APP', which |
| is a comment that has no effect on most assemblers but tells the GNU |
| assembler that it can save time by not checking for certain assembler |
| constructs. |
| |
| On systems that use SDB, it is necessary to output certain commands; see |
| `attasm.h'. |
| |
| Defined in svr4.h. */ |
| |
| /* #define ASM_FILE_START(STREAM) \ |
| output_file_directive ((STREAM), main_input_filename) */ |
| |
| /* A C expression which outputs to the stdio stream STREAM some appropriate |
| text to go at the end of an assembler file. |
| |
| If this macro is not defined, the default is to output nothing special at |
| the end of the file. Most systems don't require any definition. |
| |
| On systems that use SDB, it is necessary to output certain commands; see |
| `attasm.h'. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_FILE_END(STREAM) */ |
| |
| /* A C string constant describing how to begin a comment in the target |
| assembler language. The compiler assumes that the comment will end at the |
| end of the line. */ |
| #define ASM_COMMENT_START ";" |
| |
| /* A C string constant for text to be output before each `asm' statement or |
| group of consecutive ones. Normally this is `"#APP"', which is a comment |
| that has no effect on most assemblers but tells the GNU assembler that it |
| must check the lines that follow for all valid assembler constructs. */ |
| #define ASM_APP_ON "#APP\n" |
| |
| /* A C string constant for text to be output after each `asm' statement or |
| group of consecutive ones. Normally this is `"#NO_APP"', which tells the |
| GNU assembler to resume making the time-saving assumptions that are valid |
| for ordinary compiler output. */ |
| #define ASM_APP_OFF "#NO_APP\n" |
| |
| /* A C statement to output COFF information or DWARF debugging information |
| which indicates that filename NAME is the current source file to the stdio |
| stream STREAM. |
| |
| This macro need not be defined if the standard form of output for the file |
| format in use is appropriate. */ |
| /* #define ASM_OUTPUT_SOURCE_FILENAME(STREAM, NAME) */ |
| |
| /* A C statement to output DBX or SDB debugging information before code for |
| line number LINE of the current source file to the stdio stream STREAM. |
| |
| This macro need not be defined if the standard form of debugging information |
| for the debugger in use is appropriate. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_SOURCE_LINE(STREAM, LINE) */ |
| |
| /* A C statement to output something to the assembler file to handle a `#ident' |
| directive containing the text STRING. If this macro is not defined, nothing |
| is output for a `#ident' directive. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_IDENT(STREAM, STRING) */ |
| |
| /* A C statement to output any assembler statements which are required to |
| precede any Objective C object definitions or message sending. The |
| statement is executed only when compiling an Objective C program. */ |
| /* #define OBJC_PROLOGUE */ |
| |
| |
| /* Output of Data. */ |
| |
| /* A C statement to output to the stdio stream STREAM an assembler instruction |
| to assemble a string constant containing the LEN bytes at PTR. PTR will be |
| a C expression of type `char *' and LEN a C expression of type `int'. |
| |
| If the assembler has a `.ascii' pseudo-op as found in the Berkeley Unix |
| assembler, do not define the macro `ASM_OUTPUT_ASCII'. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_ASCII(STREAM, PTR, LEN) */ |
| |
| /* You may define this macro as a C expression. You should define the |
| expression to have a non-zero value if GNU CC should output the |
| constant pool for a function before the code for the function, or |
| a zero value if GNU CC should output the constant pool after the |
| function. If you do not define this macro, the usual case, GNU CC |
| will output the constant pool before the function. */ |
| /* #define CONSTANT_POOL_BEFORE_FUNCTION */ |
| |
| /* A C statement to output assembler commands to define the start of the |
| constant pool for a function. FUNNAME is a string giving the name of the |
| function. Should the return type of the function be required, it can be |
| obtained via FUNDECL. SIZE is the size, in bytes, of the constant pool that |
| will be written immediately after this call. |
| |
| If no constant-pool prefix is required, the usual case, this macro need not |
| be defined. */ |
| /* #define ASM_OUTPUT_POOL_PROLOGUE(FILE FUNNAME FUNDECL SIZE) */ |
| |
| /* A C statement (with or without semicolon) to output a constant in the |
| constant pool, if it needs special treatment. (This macro need not do |
| anything for RTL expressions that can be output normally.) |
| |
| The argument FILE is the standard I/O stream to output the assembler code |
| on. X is the RTL expression for the constant to output, and MODE is the |
| machine mode (in case X is a `const_int'). ALIGN is the required alignment |
| for the value X; you should output an assembler directive to force this much |
| alignment. |
| |
| The argument LABELNO is a number to use in an internal label for the address |
| of this pool entry. The definition of this macro is responsible for |
| outputting the label definition at the proper place. Here is how to do |
| this: |
| |
| ASM_OUTPUT_INTERNAL_LABEL (FILE, "LC", LABELNO); |
| |
| When you output a pool entry specially, you should end with a `goto' to the |
| label JUMPTO. This will prevent the same pool entry from being output a |
| second time in the usual manner. |
| |
| You need not define this macro if it would do nothing. */ |
| /* #define ASM_OUTPUT_SPECIAL_POOL_ENTRY(FILE, X, MODE, ALIGN, LABELNO, JUMPTO) */ |
| |
| /* Define this macro as a C expression which is nonzero if the constant EXP, of |
| type `tree', should be output after the code for a function. The compiler |
| will normally output all constants before the function; you need not define |
| this macro if this is OK. */ |
| /* #define CONSTANT_AFTER_FUNCTION_P(EXP) */ |
| |
| /* A C statement to output assembler commands to at the end of the constant |
| pool for a function. FUNNAME is a string giving the name of the function. |
| Should the return type of the function be required, you can obtain it via |
| FUNDECL. SIZE is the size, in bytes, of the constant pool that GNU CC wrote |
| immediately before this call. |
| |
| If no constant-pool epilogue is required, the usual case, you need not |
| define this macro. */ |
| /* #define ASM_OUTPUT_POOL_EPILOGUE (FILE FUNNAME FUNDECL SIZE) */ |
| |
| /* Define this macro as a C expression which is nonzero if C is used as a |
| logical line separator by the assembler. |
| |
| If you do not define this macro, the default is that only the character `;' |
| is treated as a logical line separator. */ |
| /* #define IS_ASM_LOGICAL_LINE_SEPARATOR(C) */ |
| |
| /* These macros are provided by `real.h' for writing the definitions of |
| `ASM_OUTPUT_DOUBLE' and the like: */ |
| |
| |
| /* Output of Uninitialized Variables. */ |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM the |
| assembler definition of a common-label named NAME whose size is SIZE bytes. |
| The variable ROUNDED is the size rounded up to whatever alignment the caller |
| wants. |
| |
| Use the expression `assemble_name (STREAM, NAME)' to output the name itself; |
| before and after that, output the additional assembler syntax for defining |
| the name, and a newline. |
| |
| This macro controls how the assembler definitions of uninitialized global |
| variables are output. */ |
| /* #define ASM_OUTPUT_COMMON(STREAM, NAME, SIZE, ROUNDED) */ |
| |
| /* Like `ASM_OUTPUT_COMMON' except takes the required alignment as a separate, |
| explicit argument. If you define this macro, it is used in place of |
| `ASM_OUTPUT_COMMON', and gives you more flexibility in handling the required |
| alignment of the variable. The alignment is specified as the number of |
| bits. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_ALIGNED_COMMON(STREAM, NAME, SIZE, ALIGNMENT) */ |
| |
| /* Like ASM_OUTPUT_ALIGNED_COMMON except that it takes an additional argument - |
| the DECL of the variable to be output, if there is one. This macro can be |
| called with DECL == NULL_TREE. If you define this macro, it is used in |
| place of both ASM_OUTPUT_COMMON and ASM_OUTPUT_ALIGNED_COMMON, and gives you |
| more flexibility in handling the destination of the variable. */ |
| /* #define ASM_OUTPUT_DECL_COMMON (STREAM, DECL, NAME, SIZE, ALIGNMENT) */ |
| |
| /* If defined, it is similar to `ASM_OUTPUT_COMMON', except that it is used |
| when NAME is shared. If not defined, `ASM_OUTPUT_COMMON' will be used. */ |
| /* #define ASM_OUTPUT_SHARED_COMMON(STREAM, NAME, SIZE, ROUNDED) */ |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM the |
| assembler definition of uninitialized global DECL named NAME whose size is |
| SIZE bytes. The variable ROUNDED is the size rounded up to whatever |
| alignment the caller wants. |
| |
| Try to use function `asm_output_bss' defined in `varasm.c' when defining |
| this macro. If unable, use the expression `assemble_name (STREAM, NAME)' to |
| output the name itself; before and after that, output the additional |
| assembler syntax for defining the name, and a newline. |
| |
| This macro controls how the assembler definitions of uninitialized global |
| variables are output. This macro exists to properly support languages like |
| `c++' which do not have `common' data. However, this macro currently is not |
| defined for all targets. If this macro and `ASM_OUTPUT_ALIGNED_BSS' are not |
| defined then `ASM_OUTPUT_COMMON' or `ASM_OUTPUT_ALIGNED_COMMON' or |
| `ASM_OUTPUT_DECL_COMMON' is used. */ |
| /* #define ASM_OUTPUT_BSS(STREAM, DECL, NAME, SIZE, ROUNDED) */ |
| |
| /* Like `ASM_OUTPUT_BSS' except takes the required alignment as a separate, |
| explicit argument. If you define this macro, it is used in place of |
| `ASM_OUTPUT_BSS', and gives you more flexibility in handling the required |
| alignment of the variable. The alignment is specified as the number of |
| bits. |
| |
| Try to use function `asm_output_aligned_bss' defined in file `varasm.c' when |
| defining this macro. */ |
| /* #define ASM_OUTPUT_ALIGNED_BSS(STREAM, DECL, NAME, SIZE, ALIGNMENT) */ |
| |
| /* If defined, it is similar to `ASM_OUTPUT_BSS', except that it is used when |
| NAME is shared. If not defined, `ASM_OUTPUT_BSS' will be used. */ |
| /* #define ASM_OUTPUT_SHARED_BSS(STREAM, DECL, NAME, SIZE, ROUNDED) */ |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM the |
| assembler definition of a local-common-label named NAME whose size is SIZE |
| bytes. The variable ROUNDED is the size rounded up to whatever alignment |
| the caller wants. |
| |
| Use the expression `assemble_name (STREAM, NAME)' to output the name itself; |
| before and after that, output the additional assembler syntax for defining |
| the name, and a newline. |
| |
| This macro controls how the assembler definitions of uninitialized static |
| variables are output. */ |
| /* #define ASM_OUTPUT_LOCAL(STREAM, NAME, SIZE, ROUNDED) */ |
| |
| /* Like `ASM_OUTPUT_LOCAL' except takes the required alignment as a separate, |
| explicit argument. If you define this macro, it is used in place of |
| `ASM_OUTPUT_LOCAL', and gives you more flexibility in handling the required |
| alignment of the variable. The alignment is specified as the number of |
| bits. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_ALIGNED_LOCAL(STREAM, NAME, SIZE, ALIGNMENT) */ |
| |
| /* Like `ASM_OUTPUT_ALIGNED_LOCAL' except that it takes an additional |
| parameter - the DECL of variable to be output, if there is one. |
| This macro can be called with DECL == NULL_TREE. If you define |
| this macro, it is used in place of `ASM_OUTPUT_LOCAL' and |
| `ASM_OUTPUT_ALIGNED_LOCAL', and gives you more flexibility in |
| handling the destination of the variable. */ |
| /* #define ASM_OUTPUT_DECL_LOCAL(STREAM, DECL, NAME, SIZE, ALIGNMENT) */ |
| |
| /* If defined, it is similar to `ASM_OUTPUT_LOCAL', except that it is used when |
| NAME is shared. If not defined, `ASM_OUTPUT_LOCAL' will be used. */ |
| /* #define ASM_OUTPUT_SHARED_LOCAL (STREAM, NAME, SIZE, ROUNDED) */ |
| |
| |
| /* Output and Generation of Labels. */ |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM the |
| assembler definition of a label named NAME. Use the expression |
| `assemble_name (STREAM, NAME)' to output the name itself; before and after |
| that, output the additional assembler syntax for defining the name, and a |
| newline. */ |
| |
| #define ASM_OUTPUT_LABEL(STREAM, NAME) \ |
| do { \ |
| assemble_name (STREAM, NAME); \ |
| fputs (":\n", STREAM); \ |
| } while (0) |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM any text |
| necessary for declaring the name NAME of a function which is being defined. |
| This macro is responsible for outputting the label definition (perhaps using |
| `ASM_OUTPUT_LABEL'). The argument DECL is the `FUNCTION_DECL' tree node |
| representing the function. |
| |
| If this macro is not defined, then the function name is defined in the usual |
| manner as a label (by means of `ASM_OUTPUT_LABEL'). |
| |
| Defined in svr4.h. */ |
| /* #define ASM_DECLARE_FUNCTION_NAME(STREAM, NAME, DECL) */ |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM any text |
| necessary for declaring the size of a function which is being defined. The |
| argument NAME is the name of the function. The argument DECL is the |
| `FUNCTION_DECL' tree node representing the function. |
| |
| If this macro is not defined, then the function size is not defined. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_DECLARE_FUNCTION_SIZE(STREAM, NAME, DECL) */ |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM any text |
| necessary for declaring the name NAME of an initialized variable which is |
| being defined. This macro must output the label definition (perhaps using |
| `ASM_OUTPUT_LABEL'). The argument DECL is the `VAR_DECL' tree node |
| representing the variable. |
| |
| If this macro is not defined, then the variable name is defined in the usual |
| manner as a label (by means of `ASM_OUTPUT_LABEL'). |
| |
| Defined in svr4.h. */ |
| /* #define ASM_DECLARE_OBJECT_NAME(STREAM, NAME, DECL) */ |
| |
| /* A C statement (sans semicolon) to finish up declaring a variable name once |
| the compiler has processed its initializer fully and thus has had a chance |
| to determine the size of an array when controlled by an initializer. This |
| is used on systems where it's necessary to declare something about the size |
| of the object. |
| |
| If you don't define this macro, that is equivalent to defining it to do |
| nothing. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_FINISH_DECLARE_OBJECT(STREAM, DECL, TOPLEVEL, ATEND) */ |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM some |
| commands that will make the label NAME global; that is, available for |
| reference from other files. Use the expression `assemble_name (STREAM, |
| NAME)' to output the name itself; before and after that, output the |
| additional assembler syntax for making that name global, and a newline. */ |
| |
| #define ASM_GLOBALIZE_LABEL(STREAM,NAME) \ |
| do { \ |
| fputs ("\t.globl ", STREAM); \ |
| assemble_name (STREAM, NAME); \ |
| fputs ("\n", STREAM); \ |
| } while (0) |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM some |
| commands that will make the label NAME weak; that is, available for |
| reference from other files but only used if no other definition is |
| available. Use the expression `assemble_name (STREAM, NAME)' to output the |
| name itself; before and after that, output the additional assembler syntax |
| for making that name weak, and a newline. |
| |
| If you don't define this macro, GNU CC will not support weak symbols and you |
| should not define the `SUPPORTS_WEAK' macro. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_WEAKEN_LABEL */ |
| |
| /* A C expression which evaluates to true if the target supports weak symbols. |
| |
| If you don't define this macro, `defaults.h' provides a default definition. |
| If `ASM_WEAKEN_LABEL' is defined, the default definition is `1'; otherwise, |
| it is `0'. Define this macro if you want to control weak symbol support |
| with a compiler flag such as `-melf'. */ |
| /* #define SUPPORTS_WEAK */ |
| |
| /* A C statement (sans semicolon) to mark DECL to be emitted as a |
| public symbol such that extra copies in multiple translation units |
| will be discarded by the linker. Define this macro if your object |
| file format provides support for this concept, such as the `COMDAT' |
| section flags in the Microsoft Windows PE/COFF format, and this |
| support requires changes to DECL, such as putting it in a separate |
| section. |
| |
| Defined in svr4.h. */ |
| /* #define MAKE_DECL_ONE_ONLY */ |
| |
| /* A C expression which evaluates to true if the target supports one-only |
| semantics. |
| |
| If you don't define this macro, `varasm.c' provides a default definition. |
| If `MAKE_DECL_ONE_ONLY' is defined, the default definition is `1'; |
| otherwise, it is `0'. Define this macro if you want to control one-only |
| symbol support with a compiler flag, or if setting the `DECL_ONE_ONLY' flag |
| is enough to mark a declaration to be emitted as one-only. */ |
| /* #define SUPPORTS_ONE_ONLY */ |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM any text |
| necessary for declaring the name of an external symbol named NAME which is |
| referenced in this compilation but not defined. The value of DECL is the |
| tree node for the declaration. |
| |
| This macro need not be defined if it does not need to output anything. The |
| GNU assembler and most Unix assemblers don't require anything. */ |
| /* #define ASM_OUTPUT_EXTERNAL(STREAM, DECL, NAME) */ |
| |
| /* A C statement (sans semicolon) to output on STREAM an assembler pseudo-op to |
| declare a library function name external. The name of the library function |
| is given by SYMREF, which has type `rtx' and is a `symbol_ref'. |
| |
| This macro need not be defined if it does not need to output anything. The |
| GNU assembler and most Unix assemblers don't require anything. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_EXTERNAL_LIBCALL(STREAM, SYMREF) */ |
| |
| /* A C statement (sans semicolon) to output to the stdio stream STREAM a |
| reference in assembler syntax to a label named NAME. This should add `_' to |
| the front of the name, if that is customary on your operating system, as it |
| is in most Berkeley Unix systems. This macro is used in `assemble_name'. */ |
| /* #define ASM_OUTPUT_LABELREF(STREAM, NAME) */ |
| |
| /* A C statement to output to the stdio stream STREAM a label whose name is |
| made from the string PREFIX and the number NUM. |
| |
| It is absolutely essential that these labels be distinct from the labels |
| used for user-level functions and variables. Otherwise, certain programs |
| will have name conflicts with internal labels. |
| |
| It is desirable to exclude internal labels from the symbol table of the |
| object file. Most assemblers have a naming convention for labels that |
| should be excluded; on many systems, the letter `L' at the beginning of a |
| label has this effect. You should find out what convention your system |
| uses, and follow it. |
| |
| The usual definition of this macro is as follows: |
| |
| fprintf (STREAM, "L%s%d:\n", PREFIX, NUM) |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_INTERNAL_LABEL(STREAM, PREFIX, NUM) */ |
| |
| /* A C statement to store into the string STRING a label whose name is made |
| from the string PREFIX and the number NUM. |
| |
| This string, when output subsequently by `assemble_name', should produce the |
| output that `ASM_OUTPUT_INTERNAL_LABEL' would produce with the same PREFIX |
| and NUM. |
| |
| If the string begins with `*', then `assemble_name' will output the rest of |
| the string unchanged. It is often convenient for |
| `ASM_GENERATE_INTERNAL_LABEL' to use `*' in this way. If the string doesn't |
| start with `*', then `ASM_OUTPUT_LABELREF' gets to output the string, and |
| may change it. (Of course, `ASM_OUTPUT_LABELREF' is also part of your |
| machine description, so you should know what it does on your machine.) |
| |
| Defined in svr4.h. */ |
| |
| /* |
| #define ASM_GENERATE_INTERNAL_LABEL(LABEL, PREFIX, NUM) \ |
| do { \ |
| sprintf (LABEL, "*.%s%d", PREFIX, NUM); \ |
| } while (0) |
| */ |
| |
| /* A C expression to assign to OUTVAR (which is a variable of type `char *') a |
| newly allocated string made from the string NAME and the number NUMBER, with |
| some suitable punctuation added. Use `alloca' to get space for the string. |
| |
| The string will be used as an argument to `ASM_OUTPUT_LABELREF' to produce |
| an assembler label for an internal static variable whose name is NAME. |
| Therefore, the string must be such as to result in valid assembler code. |
| The argument NUMBER is different each time this macro is executed; it |
| prevents conflicts between similarly-named internal static variables in |
| different scopes. |
| |
| Ideally this string should not be a valid C identifier, to prevent any |
| conflict with the user's own symbols. Most assemblers allow periods or |
| percent signs in assembler symbols; putting at least one of these between |
| the name and the number will suffice. */ |
| |
| #define ASM_FORMAT_PRIVATE_NAME(OUTVAR, NAME, NUMBER) \ |
| do { \ |
| (OUTVAR) = (char *) alloca (strlen ((NAME)) + 12); \ |
| sprintf ((OUTVAR), "%s.%ld", (NAME), (long)(NUMBER)); \ |
| } while (0) |
| |
| /* A C statement to output to the stdio stream STREAM assembler code which |
| defines (equates) the symbol NAME to have the value VALUE. |
| |
| If SET_ASM_OP is defined, a default definition is provided which is correct |
| for most systems. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_DEF(STREAM, NAME, VALUE) */ |
| |
| /* A C statement to output to the stdio stream STREAM assembler code which |
| defines (equates) the weak symbol NAME to have the value VALUE. |
| |
| Define this macro if the target only supports weak aliases; define |
| ASM_OUTPUT_DEF instead if possible. */ |
| /* #define ASM_OUTPUT_WEAK_ALIAS (STREAM, NAME, VALUE) */ |
| |
| /* Define this macro to override the default assembler names used for Objective |
| C methods. |
| |
| The default name is a unique method number followed by the name of the class |
| (e.g. `_1_Foo'). For methods in categories, the name of the category is |
| also included in the assembler name (e.g. `_1_Foo_Bar'). |
| |
| These names are safe on most systems, but make debugging difficult since the |
| method's selector is not present in the name. Therefore, particular systems |
| define other ways of computing names. |
| |
| BUF is an expression of type `char *' which gives you a buffer in which to |
| store the name; its length is as long as CLASS_NAME, CAT_NAME and SEL_NAME |
| put together, plus 50 characters extra. |
| |
| The argument IS_INST specifies whether the method is an instance method or a |
| class method; CLASS_NAME is the name of the class; CAT_NAME is the name of |
| the category (or NULL if the method is not in a category); and SEL_NAME is |
| the name of the selector. |
| |
| On systems where the assembler can handle quoted names, you can use this |
| macro to provide more human-readable names. */ |
| /* #define OBJC_GEN_METHOD_LABEL(BUF, IS_INST, CLASS_NAME, CAT_NAME, SEL_NAME) */ |
| |
| |
| /* Macros Controlling Initialization Routines. */ |
| |
| /* If defined, a C string constant for the assembler operation to identify the |
| following data as initialization code. If not defined, GNU CC will assume |
| such a section does not exist. When you are using special sections for |
| initialization and termination functions, this macro also controls how |
| `crtstuff.c' and `libgcc2.c' arrange to run the initialization functions. |
| |
| Defined in svr4.h. */ |
| /* #define INIT_SECTION_ASM_OP */ |
| #undef INIT_SECTION_ASM_OP |
| |
| /* If defined, `main' will not call `__main' as described above. This macro |
| should be defined for systems that control the contents of the init section |
| on a symbol-by-symbol basis, such as OSF/1, and should not be defined |
| explicitly for systems that support `INIT_SECTION_ASM_OP'. */ |
| /* #define HAS_INIT_SECTION */ |
| |
| /* If defined, a C string constant for a switch that tells the linker that the |
| following symbol is an initialization routine. */ |
| /* #define LD_INIT_SWITCH */ |
| |
| /* If defined, a C string constant for a switch that tells the linker that the |
| following symbol is a finalization routine. */ |
| /* #define LD_FINI_SWITCH */ |
| |
| /* If defined, `main' will call `__main' despite the presence of |
| `INIT_SECTION_ASM_OP'. This macro should be defined for systems where the |
| init section is not actually run automatically, but is still useful for |
| collecting the lists of constructors and destructors. */ |
| #define INVOKE__main |
| |
| /* If your system uses `collect2' as the means of processing constructors, then |
| that program normally uses `nm' to scan an object file for constructor |
| functions to be called. On certain kinds of systems, you can define these |
| macros to make `collect2' work faster (and, in some cases, make it work at |
| all): */ |
| |
| /* Define this macro if the system uses COFF (Common Object File Format) object |
| files, so that `collect2' can assume this format and scan object files |
| directly for dynamic constructor/destructor functions. */ |
| /* #define OBJECT_FORMAT_COFF */ |
| |
| /* Define this macro if the system uses ROSE format object files, so that |
| `collect2' can assume this format and scan object files directly for dynamic |
| constructor/destructor functions. |
| |
| These macros are effective only in a native compiler; `collect2' as |
| part of a cross compiler always uses `nm' for the target machine. */ |
| /* #define OBJECT_FORMAT_ROSE */ |
| |
| /* Define this macro if the system uses ELF format object files. |
| |
| Defined in svr4.h. */ |
| /* #define OBJECT_FORMAT_ELF */ |
| |
| /* Define this macro as a C string constant containing the file name to use to |
| execute `nm'. The default is to search the path normally for `nm'. |
| |
| If your system supports shared libraries and has a program to list the |
| dynamic dependencies of a given library or executable, you can define these |
| macros to enable support for running initialization and termination |
| functions in shared libraries: */ |
| /* #define REAL_NM_FILE_NAME */ |
| |
| /* Define this macro to a C string constant containing the name of the program |
| which lists dynamic dependencies, like `"ldd"' under SunOS 4. */ |
| /* #define LDD_SUFFIX */ |
| |
| /* Define this macro to be C code that extracts filenames from the output of |
| the program denoted by `LDD_SUFFIX'. PTR is a variable of type `char *' |
| that points to the beginning of a line of output from `LDD_SUFFIX'. If the |
| line lists a dynamic dependency, the code must advance PTR to the beginning |
| of the filename on that line. Otherwise, it must set PTR to `NULL'. */ |
| /* #define PARSE_LDD_OUTPUT (PTR) */ |
| |
| |
| /* Output of Assembler Instructions. */ |
| |
| /* A C initializer containing the assembler's names for the machine registers, |
| each one as a C string constant. This is what translates register numbers |
| in the compiler into assembler language. */ |
| #define REGISTER_NAMES \ |
| { \ |
| "r0", "r1", "r2", "r3", \ |
| "r4", "r5", "r6", "r7", \ |
| "r8", "r9", "r10", "r11", \ |
| "r12", "r13", "r14", "r15", \ |
| "r16", "r17", "r18", "r19", \ |
| "r20", "r21", "r22", "r23", \ |
| "r24", "r25", "r26", "r27", \ |
| "r28", "r29", "r30", "r31", \ |
| "r32", "r33", "r34", "r35", \ |
| "r36", "r37", "r38", "r39", \ |
| "r40", "r41", "r42", "r43", \ |
| "r44", "r45", "r46", "r47", \ |
| "r48", "r49", "r50", "r51", \ |
| "r52", "r53", "r54", "r55", \ |
| "r56", "r57", "r58", "r59", \ |
| "r60", "r61", "link", "sp", \ |
| "ap", \ |
| "f0", "f1", "f2", "f3", \ |
| "s", "v", "va", "c", \ |
| "a0", "a1", \ |
| "psw", "bpsw", "pc", "bpc", \ |
| "dpsw", "dpc", "rpt_c", "rpt_s", \ |
| "rpt_e", "mod_s", "mod_e", "iba", \ |
| "eit_vb", "int_s", "int_m", \ |
| } |
| |
| /* If defined, a C initializer for an array of structures containing a name and |
| a register number. This macro defines additional names for hard registers, |
| thus allowing the `asm' option in declarations to refer to registers using |
| alternate names. */ |
| #define ADDITIONAL_REGISTER_NAMES \ |
| { \ |
| {"r62", GPR_LINK}, \ |
| {"r63", GPR_SP}, \ |
| {"f4", FLAG_SAT}, \ |
| {"f5", FLAG_OVERFLOW}, \ |
| {"f6", FLAG_ACC_OVER}, \ |
| {"f7", FLAG_CARRY}, \ |
| {"carry", FLAG_CARRY}, \ |
| {"borrow", FLAG_BORROW}, \ |
| {"b", FLAG_BORROW}, \ |
| {"cr0", CR_PSW}, \ |
| {"cr1", CR_BPSW}, \ |
| {"cr2", CR_PC}, \ |
| {"cr3", CR_BPC}, \ |
| {"cr4", CR_DPSW}, \ |
| {"cr5", CR_DPC}, \ |
| {"cr7", CR_RPT_C}, \ |
| {"cr8", CR_RPT_S}, \ |
| {"cr9", CR_RPT_E}, \ |
| {"cr10", CR_MOD_S}, \ |
| {"cr11", CR_MOD_E}, \ |
| {"cr14", CR_IBA}, \ |
| {"cr15", CR_EIT_VB}, \ |
| {"cr16", CR_INT_S}, \ |
| {"cr17", CR_INT_M} \ |
| } |
| |
| /* Define this macro if you are using an unusual assembler that requires |
| different names for the machine instructions. |
| |
| The definition is a C statement or statements which output an assembler |
| instruction opcode to the stdio stream STREAM. The macro-operand PTR is a |
| variable of type `char *' which points to the opcode name in its "internal" |
| form--the form that is written in the machine description. The definition |
| should output the opcode name to STREAM, performing any translation you |
| desire, and increment the variable PTR to point at the end of the opcode so |
| that it will not be output twice. |
| |
| In fact, your macro definition may process less than the entire opcode name, |
| or more than the opcode name; but if you want to process text that includes |
| `%'-sequences to substitute operands, you must take care of the substitution |
| yourself. Just be sure to increment PTR over whatever text should not be |
| output normally. |
| |
| If you need to look at the operand values, they can be found as the elements |
| of `recog_data.operand'. |
| |
| If the macro definition does nothing, the instruction is output in the usual |
| way. */ |
| /* #define ASM_OUTPUT_OPCODE(STREAM, PTR) */ |
| |
| /* If defined, a C statement to be executed just prior to the output of |
| assembler code for INSN, to modify the extracted operands so they will be |
| output differently. |
| |
| Here the argument OPVEC is the vector containing the operands extracted from |
| INSN, and NOPERANDS is the number of elements of the vector which contain |
| meaningful data for this insn. The contents of this vector are what will be |
| used to convert the insn template into assembler code, so you can change the |
| assembler output by changing the contents of the vector. |
| |
| This macro is useful when various assembler syntaxes share a single file of |
| instruction patterns; by defining this macro differently, you can cause a |
| large class of instructions to be output differently (such as with |
| rearranged operands). Naturally, variations in assembler syntax affecting |
| individual insn patterns ought to be handled by writing conditional output |
| routines in those patterns. |
| |
| If this macro is not defined, it is equivalent to a null statement. */ |
| /* #define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) */ |
| |
| /* If defined, `FINAL_PRESCAN_INSN' will be called on each |
| `CODE_LABEL'. In that case, OPVEC will be a null pointer and |
| NOPERANDS will be zero. */ |
| /* #define FINAL_PRESCAN_LABEL */ |
| |
| /* A C compound statement to output to stdio stream STREAM the assembler syntax |
| for an instruction operand X. X is an RTL expression. |
| |
| CODE is a value that can be used to specify one of several ways of printing |
| the operand. It is used when identical operands must be printed differently |
| depending on the context. CODE comes from the `%' specification that was |
| used to request printing of the operand. If the specification was just |
| `%DIGIT' then CODE is 0; if the specification was `%LTR DIGIT' then CODE is |
| the ASCII code for LTR. |
| |
| If X is a register, this macro should print the register's name. The names |
| can be found in an array `reg_names' whose type is `char *[]'. `reg_names' |
| is initialized from `REGISTER_NAMES'. |
| |
| When the machine description has a specification `%PUNCT' (a `%' followed by |
| a punctuation character), this macro is called with a null pointer for X and |
| the punctuation character for CODE. |
| |
| Standard operand flags that are handled elsewhere: |
| `=' Output a number unique to each instruction in the compilation. |
| `a' Substitute an operand as if it were a memory reference. |
| `c' Omit the syntax that indicates an immediate operand. |
| `l' Substitute a LABEL_REF into a jump instruction. |
| `n' Like %cDIGIT, except negate the value before printing. |
| |
| The d30v specific operand flags are: |
| `.' Print r0. |
| `f' Print a SF constant as an int. |
| `s' Subtract 32 and negate. |
| `A' Print accumulator number without an `a' in front of it. |
| `B' Print bit offset for BSET, etc. instructions. |
| `E' Print u if this is zero extend, nothing if this is sign extend. |
| `F' Emit /{f,t,x}{f,t,x} for executing a false condition. |
| `L' Print the lower half of a 64 bit item. |
| `M' Print a memory reference for ld/st instructions. |
| `R' Return appropriate cmp instruction for relational test. |
| `S' Subtract 32. |
| `T' Emit /{f,t,x}{f,t,x} for executing a true condition. |
| `U' Print the upper half of a 64 bit item. */ |
| |
| #define PRINT_OPERAND(STREAM, X, CODE) d30v_print_operand (STREAM, X, CODE) |
| |
| /* A C expression which evaluates to true if CODE is a valid punctuation |
| character for use in the `PRINT_OPERAND' macro. If |
| `PRINT_OPERAND_PUNCT_VALID_P' is not defined, it means that no punctuation |
| characters (except for the standard one, `%') are used in this way. */ |
| |
| #define PRINT_OPERAND_PUNCT_VALID_P(CODE) ((CODE) == '.' || (CODE) == ':') |
| |
| /* A C compound statement to output to stdio stream STREAM the assembler syntax |
| for an instruction operand that is a memory reference whose address is X. X |
| is an RTL expression. |
| |
| On some machines, the syntax for a symbolic address depends on the section |
| that the address refers to. On these machines, define the macro |
| `ENCODE_SECTION_INFO' to store the information into the `symbol_ref', and |
| then check for it here. *Note Assembler Format::. */ |
| |
| #define PRINT_OPERAND_ADDRESS(STREAM, X) d30v_print_operand_address (STREAM, X) |
| |
| /* A C statement, to be executed after all slot-filler instructions have been |
| output. If necessary, call `dbr_sequence_length' to determine the number of |
| slots filled in a sequence (zero if not currently outputting a sequence), to |
| decide how many no-ops to output, or whatever. |
| |
| Don't define this macro if it has nothing to do, but it is helpful in |
| reading assembly output if the extent of the delay sequence is made explicit |
| (e.g. with white space). |
| |
| Note that output routines for instructions with delay slots must be prepared |
| to deal with not being output as part of a sequence (i.e. when the |
| scheduling pass is not run, or when no slot fillers could be found.) The |
| variable `final_sequence' is null when not processing a sequence, otherwise |
| it contains the `sequence' rtx being output. */ |
| /* #define DBR_OUTPUT_SEQEND(FILE) */ |
| |
| /* If defined, C string expressions to be used for the `%R', `%L', `%U', and |
| `%I' options of `asm_fprintf' (see `final.c'). These are useful when a |
| single `md' file must support multiple assembler formats. In that case, the |
| various `tm.h' files can define these macros differently. |
| |
| USER_LABEL_PREFIX is defined in svr4.h. */ |
| |
| #define REGISTER_PREFIX "%" |
| #define LOCAL_LABEL_PREFIX "." |
| #define USER_LABEL_PREFIX "" |
| #define IMMEDIATE_PREFIX "" |
| |
| /* If your target supports multiple dialects of assembler language (such as |
| different opcodes), define this macro as a C expression that gives the |
| numeric index of the assembler language dialect to use, with zero as the |
| first variant. |
| |
| If this macro is defined, you may use `{option0|option1|option2...}' |
| constructs in the output templates of patterns (*note Output Template::.) or |
| in the first argument of `asm_fprintf'. This construct outputs `option0', |
| `option1' or `option2', etc., if the value of `ASSEMBLER_DIALECT' is zero, |
| one or two, etc. Any special characters within these strings retain their |
| usual meaning. |
| |
| If you do not define this macro, the characters `{', `|' and `}' do not have |
| any special meaning when used in templates or operands to `asm_fprintf'. |
| |
| Define the macros `REGISTER_PREFIX', `LOCAL_LABEL_PREFIX', |
| `USER_LABEL_PREFIX' and `IMMEDIATE_PREFIX' if you can express the variations |
| in assemble language syntax with that mechanism. Define `ASSEMBLER_DIALECT' |
| and use the `{option0|option1}' syntax if the syntax variant are larger and |
| involve such things as different opcodes or operand order. */ |
| /* #define ASSEMBLER_DIALECT */ |
| |
| /* A C expression to output to STREAM some assembler code which will push hard |
| register number REGNO onto the stack. The code need not be optimal, since |
| this macro is used only when profiling. */ |
| /* #define ASM_OUTPUT_REG_PUSH (STREAM, REGNO) */ |
| |
| /* A C expression to output to STREAM some assembler code which will pop hard |
| register number REGNO off of the stack. The code need not be optimal, since |
| this macro is used only when profiling. */ |
| /* #define ASM_OUTPUT_REG_POP (STREAM, REGNO) */ |
| |
| |
| /* Output of dispatch tables. */ |
| |
| /* This macro should be provided on machines where the addresses in a dispatch |
| table are relative to the table's own address. |
| |
| The definition should be a C statement to output to the stdio stream STREAM |
| an assembler pseudo-instruction to generate a difference between two labels. |
| VALUE and REL are the numbers of two internal labels. The definitions of |
| these labels are output using `ASM_OUTPUT_INTERNAL_LABEL', and they must be |
| printed in the same way here. For example, |
| |
| fprintf (STREAM, "\t.word L%d-L%d\n", VALUE, REL) */ |
| |
| #define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \ |
| fprintf (STREAM, "\t.word .L%d-.L%d\n", VALUE, REL) |
| |
| /* This macro should be provided on machines where the addresses in a dispatch |
| table are absolute. |
| |
| The definition should be a C statement to output to the stdio stream STREAM |
| an assembler pseudo-instruction to generate a reference to a label. VALUE |
| is the number of an internal label whose definition is output using |
| `ASM_OUTPUT_INTERNAL_LABEL'. For example, |
| |
| fprintf (STREAM, "\t.word L%d\n", VALUE) */ |
| |
| #define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \ |
| fprintf (STREAM, "\t.word .L%d\n", VALUE) |
| |
| /* Define this if the label before a jump-table needs to be output specially. |
| The first three arguments are the same as for `ASM_OUTPUT_INTERNAL_LABEL'; |
| the fourth argument is the jump-table which follows (a `jump_insn' |
| containing an `addr_vec' or `addr_diff_vec'). |
| |
| This feature is used on system V to output a `swbeg' statement for the |
| table. |
| |
| If this macro is not defined, these labels are output with |
| `ASM_OUTPUT_INTERNAL_LABEL'. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_CASE_LABEL(STREAM, PREFIX, NUM, TABLE) */ |
| |
| /* Define this if something special must be output at the end of a jump-table. |
| The definition should be a C statement to be executed after the assembler |
| code for the table is written. It should write the appropriate code to |
| stdio stream STREAM. The argument TABLE is the jump-table insn, and NUM is |
| the label-number of the preceding label. |
| |
| If this macro is not defined, nothing special is output at the end of the |
| jump-table. */ |
| /* #define ASM_OUTPUT_CASE_END(STREAM, NUM, TABLE) */ |
| |
| |
| /* Assembler Commands for Exception Regions. */ |
| |
| /* An rtx used to mask the return address found via RETURN_ADDR_RTX, so that it |
| does not contain any extraneous set bits in it. */ |
| /* #define MASK_RETURN_ADDR */ |
| |
| /* Define this macro to 0 if your target supports DWARF 2 frame unwind |
| information, but it does not yet work with exception handling. Otherwise, |
| if your target supports this information (if it defines |
| `INCOMING_RETURN_ADDR_RTX'), GCC will provide a default definition of 1. |
| |
| If this macro is defined to 1, the DWARF 2 unwinder will be the default |
| exception handling mechanism; otherwise, setjmp/longjmp will be used by |
| default. |
| |
| If this macro is defined to anything, the DWARF 2 unwinder will be used |
| instead of inline unwinders and __unwind_function in the non-setjmp case. */ |
| /* #define DWARF2_UNWIND_INFO */ |
| |
| |
| /* Assembler Commands for Alignment. */ |
| |
| /* The alignment (log base 2) to put in front of LABEL, which follows |
| a BARRIER. |
| |
| This macro need not be defined if you don't want any special alignment to be |
| done at such a time. Most machine descriptions do not currently define the |
| macro. */ |
| /* #define LABEL_ALIGN_AFTER_BARRIER(LABEL) */ |
| |
| /* The desired alignment for the location counter at the beginning |
| of a loop. |
| |
| This macro need not be defined if you don't want any special alignment to be |
| done at such a time. Most machine descriptions do not currently define the |
| macro. */ |
| /* #define LOOP_ALIGN(LABEL) */ |
| |
| /* A C statement to output to the stdio stream STREAM an assembler instruction |
| to advance the location counter by NBYTES bytes. Those bytes should be zero |
| when loaded. NBYTES will be a C expression of type `int'. |
| |
| Defined in svr4.h. */ |
| /* #define ASM_OUTPUT_SKIP(STREAM, NBYTES) \ |
| fprintf (STREAM, "\t.zero\t%u\n", (NBYTES)) */ |
| |
| /* Define this macro if `ASM_OUTPUT_SKIP' should not be used in the text |
| section because it fails put zeros in the bytes that are skipped. This is |
| true on many Unix systems, where the pseudo-op to skip bytes produces no-op |
| instructions rather than zeros when used in the text section. */ |
| /* #define ASM_NO_SKIP_IN_TEXT */ |
| |
| /* A C statement to output to the stdio stream STREAM an assembler command to |
| advance the location counter to a multiple of 2 to the POWER bytes. POWER |
| will be a C expression of type `int'. */ |
| #define ASM_OUTPUT_ALIGN(STREAM, POWER) \ |
| fprintf ((STREAM), "\t.p2align %d\n", (POWER)) |
| |
| |
| /* Macros Affecting all Debug Formats. */ |
| |
| /* A C expression that returns the DBX register number for the compiler |
| register number REGNO. In simple cases, the value of this expression may be |
| REGNO itself. But sometimes there are some registers that the compiler |
| knows about and DBX does not, or vice versa. In such cases, some register |
| may need to have one number in the compiler and another for DBX. |
| |
| If two registers have consecutive numbers inside GNU CC, and they can be |
| used as a pair to hold a multiword value, then they *must* have consecutive |
| numbers after renumbering with `DBX_REGISTER_NUMBER'. Otherwise, debuggers |
| will be unable to access such a pair, because they expect register pairs to |
| be consecutive in their own numbering scheme. |
| |
| If you find yourself defining `DBX_REGISTER_NUMBER' in way that does not |
| preserve register pairs, then what you must do instead is redefine the |
| actual register numbering scheme. */ |
| #define DBX_REGISTER_NUMBER(REGNO) \ |
| (GPR_P (REGNO) ? ((REGNO) - GPR_FIRST) \ |
| : ACCUM_P (REGNO) ? ((REGNO) - ACCUM_FIRST + 84) \ |
| : FLAG_P (REGNO) ? 66 /* return psw for all flags */ \ |
| : (REGNO) == ARG_POINTER_REGNUM ? (GPR_SP - GPR_FIRST) \ |
| : (REGNO) == CR_PSW ? (66 + 0) \ |
| : (REGNO) == CR_BPSW ? (66 + 1) \ |
| : (REGNO) == CR_PC ? (66 + 2) \ |
| : (REGNO) == CR_BPC ? (66 + 3) \ |
| : (REGNO) == CR_DPSW ? (66 + 4) \ |
| : (REGNO) == CR_DPC ? (66 + 5) \ |
| : (REGNO) == CR_RPT_C ? (66 + 7) \ |
| : (REGNO) == CR_RPT_S ? (66 + 8) \ |
| : (REGNO) == CR_RPT_E ? (66 + 9) \ |
| : (REGNO) == CR_MOD_S ? (66 + 10) \ |
| : (REGNO) == CR_MOD_E ? (66 + 11) \ |
| : (REGNO) == CR_IBA ? (66 + 14) \ |
| : (REGNO) == CR_EIT_VB ? (66 + 15) \ |
| : (REGNO) == CR_INT_S ? (66 + 16) \ |
| : (REGNO) == CR_INT_M ? (66 + 17) \ |
| : -1) |
| |
| /* A C expression that returns the integer offset value for an automatic |
| variable having address X (an RTL expression). The default computation |
| assumes that X is based on the frame-pointer and gives the offset from the |
| frame-pointer. This is required for targets that produce debugging output |
| for DBX or COFF-style debugging output for SDB and allow the frame-pointer |
| to be eliminated when the `-g' options is used. */ |
| /* #define DEBUGGER_AUTO_OFFSET(X) */ |
| |
| /* A C expression that returns the integer offset value for an argument having |
| address X (an RTL expression). The nominal offset is OFFSET. */ |
| /* #define DEBUGGER_ARG_OFFSET(OFFSET, X) */ |
| |
| /* A C expression that returns the type of debugging output GNU CC produces |
| when the user specifies `-g' or `-ggdb'. Define this if you have arranged |
| for GNU CC to support more than one format of debugging output. Currently, |
| the allowable values are `DBX_DEBUG', `SDB_DEBUG', `DWARF_DEBUG', |
| `DWARF2_DEBUG', and `XCOFF_DEBUG'. |
| |
| The value of this macro only affects the default debugging output; the user |
| can always get a specific type of output by using `-gstabs', `-gcoff', |
| `-gdwarf-1', `-gdwarf-2', or `-gxcoff'. |
| |
| Defined in svr4.h. */ |
| |
| #undef PREFERRED_DEBUGGING_TYPE |
| #define PREFERRED_DEBUGGING_TYPE DBX_DEBUG |
| |
| |
| /* Specific Options for DBX Output. */ |
| |
| /* Define this macro if GNU CC should produce debugging output for DBX in |
| response to the `-g' option. |
| |
| Defined in svr4.h. */ |
| /* #define DBX_DEBUGGING_INFO */ |
| |
| /* Define this macro if GNU CC should produce XCOFF format debugging output in |
| response to the `-g' option. This is a variant of DBX format. */ |
| /* #define XCOFF_DEBUGGING_INFO */ |
| |
| /* Define this macro to control whether GNU CC should by default generate GDB's |
| extended version of DBX debugging information (assuming DBX-format debugging |
| information is enabled at all). If you don't define the macro, the default |
| is 1: always generate the extended information if there is any occasion to. */ |
| /* #define DEFAULT_GDB_EXTENSIONS */ |
| |
| /* Define this macro if all `.stabs' commands should be output while in the |
| text section. */ |
| /* #define DEBUG_SYMS_TEXT */ |
| |
| /* A C string constant naming the assembler pseudo op to use instead of |
| `.stabs' to define an ordinary debugging symbol. If you don't define this |
| macro, `.stabs' is used. This macro applies only to DBX debugging |
| information format. */ |
| /* #define ASM_STABS_OP */ |
| |
| /* A C string constant naming the assembler pseudo op to use instead of |
| `.stabd' to define a debugging symbol whose value is the current location. |
| If you don't define this macro, `.stabd' is used. This macro applies only |
| to DBX debugging information format. */ |
| /* #define ASM_STABD_OP */ |
| |
| /* A C string constant naming the assembler pseudo op to use instead of |
| `.stabn' to define a debugging symbol with no name. If you don't define |
| this macro, `.stabn' is used. This macro applies only to DBX debugging |
| information format. */ |
| /* #define ASM_STABN_OP */ |
| |
| /* Define this macro if DBX on your system does not support the construct |
| `xsTAGNAME'. On some systems, this construct is used to describe a forward |
| reference to a structure named TAGNAME. On other systems, this construct is |
| not supported at all. */ |
| /* #define DBX_NO_XREFS */ |
| |
| /* A symbol name in DBX-format debugging information is normally continued |
| (split into two separate `.stabs' directives) when it exceeds a certain |
| length (by default, 80 characters). On some operating systems, DBX requires |
| this splitting; on others, splitting must not be done. You can inhibit |
| splitting by defining this macro with the value zero. You can override the |
| default splitting-length by defining this macro as an expression for the |
| length you desire. */ |
| /* #define DBX_CONTIN_LENGTH */ |
| |
| /* Normally continuation is indicated by adding a `\' character to the end of a |
| `.stabs' string when a continuation follows. To use a different character |
| instead, define this macro as a character constant for the character you |
| want to use. Do not define this macro if backslash is correct for your |
| system. */ |
| /* #define DBX_CONTIN_CHAR */ |
| |
| /* Define this macro if it is necessary to go to the data section before |
| outputting the `.stabs' pseudo-op for a non-global static variable. */ |
| /* #define DBX_STATIC_STAB_DATA_SECTION */ |
| |
| /* The value to use in the "code" field of the `.stabs' directive for a |
| typedef. The default is `N_LSYM'. */ |
| /* #define DBX_TYPE_DECL_STABS_CODE */ |
| |
| /* The value to use in the "code" field of the `.stabs' directive for a static |
| variable located in the text section. DBX format does not provide any |
| "right" way to do this. The default is `N_FUN'. */ |
| /* #define DBX_STATIC_CONST_VAR_CODE */ |
| |
| /* The value to use in the "code" field of the `.stabs' directive for a |
| parameter passed in registers. DBX format does not provide any "right" way |
| to do this. The default is `N_RSYM'. */ |
| /* #define DBX_REGPARM_STABS_CODE */ |
| |
| /* The letter to use in DBX symbol data to identify a symbol as a parameter |
| passed in registers. DBX format does not customarily provide any way to do |
| this. The default is `'P''. */ |
| /* #define DBX_REGPARM_STABS_LETTER */ |
| |
| /* The letter to use in DBX symbol data to identify a symbol as a stack |
| parameter. The default is `'p''. */ |
| /* #define DBX_MEMPARM_STABS_LETTER */ |
| |
| /* Define this macro if the DBX information for a function and its arguments |
| should precede the assembler code for the function. Normally, in DBX |
| format, the debugging information entirely follows the assembler code. |
| |
| Defined in svr4.h. */ |
| /* #define DBX_FUNCTION_FIRST */ |
| |
| /* Define this macro if the `N_LBRAC' symbol for a block should precede the |
| debugging information for variables and functions defined in that block. |
| Normally, in DBX format, the `N_LBRAC' symbol comes first. */ |
| /* #define DBX_LBRAC_FIRST */ |
| |
| /* Define this macro if the value of a symbol describing the scope of a block |
| (`N_LBRAC' or `N_RBRAC') should be relative to the start of the enclosing |
| function. Normally, GNU C uses an absolute address. |
| |
| Defined in svr4.h. */ |
| /* #define DBX_BLOCKS_FUNCTION_RELATIVE */ |
| |
| /* Define this macro if GNU C should generate `N_BINCL' and `N_EINCL' |
| stabs for included header files, as on Sun systems. This macro |
| also directs GNU C to output a type number as a pair of a file |
| number and a type number within the file. Normally, GNU C does not |
| generate `N_BINCL' or `N_EINCL' stabs, and it outputs a single |
| number for a type number. */ |
| /* #define DBX_USE_BINCL */ |
| |
| |
| /* Open ended Hooks for DBX Output. */ |
| |
| /* Define this macro to say how to output to STREAM the debugging information |
| for the start of a scope level for variable names. The argument NAME is the |
| name of an assembler symbol (for use with `assemble_name') whose value is |
| the address where the scope begins. */ |
| /* #define DBX_OUTPUT_LBRAC(STREAM, NAME) */ |
| |
| /* Like `DBX_OUTPUT_LBRAC', but for the end of a scope level. */ |
| /* #define DBX_OUTPUT_RBRAC(STREAM, NAME) */ |
| |
| /* Define this macro if the target machine requires special handling to output |
| an enumeration type. The definition should be a C statement (sans |
| semicolon) to output the appropriate information to STREAM for the type |
| TYPE. */ |
| /* #define DBX_OUTPUT_ENUM(STREAM, TYPE) */ |
| |
| /* Define this macro if the target machine requires special output at the end |
| of the debugging information for a function. The definition should be a C |
| statement (sans semicolon) to output the appropriate information to STREAM. |
| FUNCTION is the `FUNCTION_DECL' node for the function. */ |
| /* #define DBX_OUTPUT_FUNCTION_END(STREAM, FUNCTION) */ |
| |
| /* Define this macro if you need to control the order of output of the standard |
| data types at the beginning of compilation. The argument SYMS is a `tree' |
| which is a chain of all the predefined global symbols, including names of |
| data types. |
| |
| Normally, DBX output starts with definitions of the types for integers and |
| characters, followed by all the other predefined types of the particular |
| language in no particular order. |
| |
| On some machines, it is necessary to output different particular types |
| first. To do this, define `DBX_OUTPUT_STANDARD_TYPES' to output those |
| symbols in the necessary order. Any predefined types that you don't |
| explicitly output will be output afterward in no particular order. |
| |
| Be careful not to define this macro so that it works only for C. There are |
| no global variables to access most of the built-in types, because another |
| language may have another set of types. The way to output a particular type |
| is to look through SYMS to see if you can find it. Here is an example: |
| |
| { |
| tree decl; |
| for (decl = syms; decl; decl = TREE_CHAIN (decl)) |
| if (!strcmp (IDENTIFIER_POINTER (DECL_NAME (decl)), |
| "long int")) |
| dbxout_symbol (decl); |
| ... |
| } |
| |
| This does nothing if the expected type does not exist. |
| |
| See the function `init_decl_processing' in `c-decl.c' to find the names to |
| use for all the built-in C types. */ |
| /* #define DBX_OUTPUT_STANDARD_TYPES(SYMS) */ |
| |
| /* Some stabs encapsulation formats (in particular ECOFF), cannot |
| handle the `.stabs "",N_FUN,,0,0,Lscope-function-1' gdb dbx |
| extension construct. On those machines, define this macro to turn |
| this feature off without disturbing the rest of the gdb extensions. */ |
| /* #define NO_DBX_FUNCTION_END */ |
| |
| |
| /* File names in DBX format. */ |
| |
| /* Define this if DBX wants to have the current directory recorded in each |
| object file. |
| |
| Note that the working directory is always recorded if GDB extensions are |
| enabled. */ |
| /* #define DBX_WORKING_DIRECTORY */ |
| |
| /* A C statement to output DBX debugging information to the stdio stream STREAM |
| which indicates that file NAME is the main source file--the file specified |
| as the input file for compilation. This macro is called only once, at the |
| beginning of compilation. |
| |
| This macro need not be defined if the standard form of output for DBX |
| debugging information is appropriate. |
| |
| Defined in svr4.h. */ |
| /* #define DBX_OUTPUT_MAIN_SOURCE_FILENAME(STREAM, NAME) */ |
| |
| /* A C statement to output DBX debugging information to the stdio stream STREAM |
| which indicates that the current directory during compilation is named NAME. |
| |
| This macro need not be defined if the standard form of output for DBX |
| debugging information is appropriate. */ |
| /* #define DBX_OUTPUT_MAIN_SOURCE_DIRECTORY(STREAM, NAME) */ |
| |
| /* A C statement to output DBX debugging information at the end of compilation |
| of the main source file NAME. |
| |
| If you don't define this macro, nothing special is output at the end of |
| compilation, which is correct for most machines. */ |
| /* #define DBX_OUTPUT_MAIN_SOURCE_FILE_END(STREAM, NAME) */ |
| |
| /* A C statement to output DBX debugging information to the stdio stream STREAM |
| which indicates that file NAME is the current source file. This output is |
| generated each time input shifts to a different source file as a result of |
| `#include', the end of an included file, or a `#line' command. |
| |
| This macro need not be defined if the standard form of output for DBX |
| debugging information is appropriate. */ |
| /* #define DBX_OUTPUT_SOURCE_FILENAME(STREAM, NAME) */ |
| |
| |
| /* Macros for SDB and Dwarf Output. */ |
| |
| /* Define this macro if GNU CC should produce COFF-style debugging output for |
| SDB in response to the `-g' option. */ |
| /* #define SDB_DEBUGGING_INFO */ |
| |
| /* Define this macro if GNU CC should produce dwarf format debugging output in |
| response to the `-g' option. |
| |
| Defined in svr4.h. */ |
| /* #define DWARF_DEBUGGING_INFO */ |
| |
| /* Define this macro if GNU CC should produce dwarf version 2 format debugging |
| output in response to the `-g' option. |
| |
| To support optional call frame debugging information, you must also define |
| `INCOMING_RETURN_ADDR_RTX' and either set `RTX_FRAME_RELATED_P' on the |
| prologue insns if you use RTL for the prologue, or call `dwarf2out_def_cfa' |
| and `dwarf2out_reg_save' as appropriate from output_function_prologue() if |
| you don't. |
| |
| Defined in svr4.h. */ |
| /* #define DWARF2_DEBUGGING_INFO */ |
| |
| /* Define these macros to override the assembler syntax for the special SDB |
| assembler directives. See `sdbout.c' for a list of these macros and their |
| arguments. If the standard syntax is used, you need not define them |
| yourself. */ |
| /* #define PUT_SDB_... */ |
| |
| /* Some assemblers do not support a semicolon as a delimiter, even between SDB |
| assembler directives. In that case, define this macro to be the delimiter |
| to use (usually `\n'). It is not necessary to define a new set of |
| `PUT_SDB_OP' macros if this is the only change required. */ |
| /* #define SDB_DELIM */ |
| |
| /* Define this macro to override the usual method of constructing a dummy name |
| for anonymous structure and union types. See `sdbout.c' for more |
| information. */ |
| /* #define SDB_GENERATE_FAKE */ |
| |
| /* Define this macro to allow references to unknown structure, union, or |
| enumeration tags to be emitted. Standard COFF does not allow handling of |
| unknown references, MIPS ECOFF has support for it. */ |
| /* #define SDB_ALLOW_UNKNOWN_REFERENCES */ |
| |
| /* Define this macro to allow references to structure, union, or enumeration |
| tags that have not yet been seen to be handled. Some assemblers choke if |
| forward tags are used, while some require it. */ |
| /* #define SDB_ALLOW_FORWARD_REFERENCES */ |
| |
| |
| |
| /* Miscellaneous Parameters. */ |
| |
| /* Define this if you have defined special-purpose predicates in the file |
| `MACHINE.c'. This macro is called within an initializer of an array of |
| structures. The first field in the structure is the name of a predicate and |
| the second field is an array of rtl codes. For each predicate, list all rtl |
| codes that can be in expressions matched by the predicate. The list should |
| have a trailing comma. Here is an example of two entries in the list for a |
| typical RISC machine: |
| |
| #define PREDICATE_CODES \ |
| {"gen_reg_rtx_operand", {SUBREG, REG}}, \ |
| {"reg_or_short_cint_operand", {SUBREG, REG, CONST_INT}}, |
| |
| Defining this macro does not affect the generated code (however, incorrect |
| definitions that omit an rtl code that may be matched by the predicate can |
| cause the compiler to malfunction). Instead, it allows the table built by |
| `genrecog' to be more compact and efficient, thus speeding up the compiler. |
| The most important predicates to include in the list specified by this macro |
| are thoses used in the most insn patterns. */ |
| |
| #define PREDICATE_CODES \ |
| { "short_memory_operand", { MEM }}, \ |
| { "long_memory_operand", { MEM }}, \ |
| { "d30v_memory_operand", { MEM }}, \ |
| { "single_reg_memory_operand", { MEM }}, \ |
| { "const_addr_memory_operand", { MEM }}, \ |
| { "call_operand", { MEM }}, \ |
| { "gpr_operand", { REG, SUBREG }}, \ |
| { "accum_operand", { REG, SUBREG }}, \ |
| { "gpr_or_accum_operand", { REG, SUBREG }}, \ |
| { "cr_operand", { REG, SUBREG }}, \ |
| { "repeat_operand", { REG, SUBREG }}, \ |
| { "flag_operand", { REG, SUBREG }}, \ |
| { "br_flag_operand", { REG, SUBREG }}, \ |
| { "br_flag_or_constant_operand", { REG, SUBREG, CONST_INT }}, \ |
| { "gpr_or_br_flag_operand", { REG, SUBREG }}, \ |
| { "f0_operand", { REG, SUBREG }}, \ |
| { "f1_operand", { REG, SUBREG }}, \ |
| { "carry_operand", { REG, SUBREG }}, \ |
| { "reg_or_0_operand", { REG, SUBREG, CONST_INT, \ |
| CONST_DOUBLE }}, \ |
| { "gpr_or_signed6_operand", { REG, SUBREG, CONST_INT }}, \ |
| { "gpr_or_unsigned5_operand", { REG, SUBREG, CONST_INT }}, \ |
| { "gpr_or_unsigned6_operand", { REG, SUBREG, CONST_INT }}, \ |
| { "gpr_or_constant_operand", { REG, SUBREG, CONST_INT, \ |
| CONST, SYMBOL_REF, \ |
| LABEL_REF }}, \ |
| { "gpr_or_dbl_const_operand", { REG, SUBREG, CONST_INT, \ |
| CONST, SYMBOL_REF, \ |
| LABEL_REF, CONST_DOUBLE }}, \ |
| { "gpr_or_memory_operand", { REG, SUBREG, MEM }}, \ |
| { "move_input_operand", { REG, SUBREG, MEM, CONST_INT, \ |
| CONST, SYMBOL_REF, \ |
| LABEL_REF, CONST_DOUBLE }}, \ |
| { "move_output_operand", { REG, SUBREG, MEM }}, \ |
| { "signed6_operand", { CONST_INT }}, \ |
| { "unsigned5_operand", { CONST_INT }}, \ |
| { "unsigned6_operand", { CONST_INT }}, \ |
| { "bitset_operand", { CONST_INT }}, \ |
| { "condexec_test_operator", { EQ, NE }}, \ |
| { "condexec_branch_operator", { EQ, NE }}, \ |
| { "condexec_unary_operator", { ABS, NEG, NOT, ZERO_EXTEND }}, \ |
| { "condexec_addsub_operator", { PLUS, MINUS }}, \ |
| { "condexec_binary_operator", { MULT, AND, IOR, XOR, \ |
| ASHIFT, ASHIFTRT, LSHIFTRT, \ |
| ROTATE, ROTATERT }}, \ |
| { "condexec_shiftl_operator", { ASHIFT, ROTATE }}, \ |
| { "condexec_extend_operator", { SIGN_EXTEND, ZERO_EXTEND }}, \ |
| { "branch_zero_operator", { EQ, NE }}, \ |
| { "cond_move_dest_operand", { REG, SUBREG, MEM }}, \ |
| { "cond_move_operand", { REG, SUBREG, CONST_INT, \ |
| CONST, SYMBOL_REF, \ |
| LABEL_REF, MEM }}, \ |
| { "cond_exec_operand", { REG, SUBREG, CONST_INT, \ |
| CONST, SYMBOL_REF, \ |
| LABEL_REF, MEM }}, \ |
| { "srelational_si_operator", { EQ, NE, LT, LE, GT, GE }}, \ |
| { "urelational_si_operator", { LTU, LEU, GTU, GEU }}, \ |
| { "relational_di_operator", { EQ, NE, LT, LE, GT, GE, \ |
| LTU, LEU, GTU, GEU }}, |
| |
| /* An alias for a machine mode name. This is the machine mode that elements of |
| a jump-table should have. */ |
| #define CASE_VECTOR_MODE SImode |
| |
| /* Define as C expression which evaluates to nonzero if the tablejump |
| instruction expects the table to contain offsets from the address of the |
| table. |
| Do not define this if the table should contain absolute addresses. */ |
| /* #define CASE_VECTOR_PC_RELATIVE 1 */ |
| |
| /* Define this if control falls through a `case' insn when the index value is |
| out of range. This means the specified default-label is actually ignored by |
| the `case' insn proper. */ |
| /* #define CASE_DROPS_THROUGH */ |
| |
| /* Define this to be the smallest number of different values for which it is |
| best to use a jump-table instead of a tree of conditional branches. The |
| default is four for machines with a `casesi' instruction and five otherwise. |
| This is best for most machines. */ |
| /* #define CASE_VALUES_THRESHOLD */ |
| |
| /* Define this macro if operations between registers with integral mode smaller |
| than a word are always performed on the entire register. Most RISC machines |
| have this property and most CISC machines do not. */ |
| #define WORD_REGISTER_OPERATIONS 1 |
| |
| /* Define this macro to be a C expression indicating when insns that read |
| memory in MODE, an integral mode narrower than a word, set the bits outside |
| of MODE to be either the sign-extension or the zero-extension of the data |
| read. Return `SIGN_EXTEND' for values of MODE for which the insn |
| sign-extends, `ZERO_EXTEND' for which it zero-extends, and `NIL' for other |
| modes. |
| |
| This macro is not called with MODE non-integral or with a width greater than |
| or equal to `BITS_PER_WORD', so you may return any value in this case. Do |
| not define this macro if it would always return `NIL'. On machines where |
| this macro is defined, you will normally define it as the constant |
| `SIGN_EXTEND' or `ZERO_EXTEND'. */ |
| |
| #define LOAD_EXTEND_OP(MODE) SIGN_EXTEND |
| |
| /* Define if loading short immediate values into registers sign extends. */ |
| #define SHORT_IMMEDIATES_SIGN_EXTEND |
| |
| /* Define this macro if the same instructions that convert a floating point |
| number to a signed fixed point number also convert validly to an unsigned |
| one. */ |
| /* #define FIXUNS_TRUNC_LIKE_FIX_TRUNC */ |
| |
| /* The maximum number of bytes that a single instruction can move quickly from |
| memory to memory. */ |
| #define MOVE_MAX 8 |
| |
| /* The maximum number of bytes that a single instruction can move quickly from |
| memory to memory. If this is undefined, the default is `MOVE_MAX'. |
| Otherwise, it is the constant value that is the largest value that |
| `MOVE_MAX' can have at run-time. */ |
| /* #define MAX_MOVE_MAX */ |
| |
| /* A C expression that is nonzero if on this machine the number of bits |
| actually used for the count of a shift operation is equal to the number of |
| bits needed to represent the size of the object being shifted. When this |
| macro is non-zero, the compiler will assume that it is safe to omit a |
| sign-extend, zero-extend, and certain bitwise `and' instructions that |
| truncates the count of a shift operation. On machines that have |
| instructions that act on bitfields at variable positions, which may include |
| `bit test' instructions, a nonzero `SHIFT_COUNT_TRUNCATED' also enables |
| deletion of truncations of the values that serve as arguments to bitfield |
| instructions. |
| |
| If both types of instructions truncate the count (for shifts) and position |
| (for bitfield operations), or if no variable-position bitfield instructions |
| exist, you should define this macro. |
| |
| However, on some machines, such as the 80386 and the 680x0, truncation only |
| applies to shift operations and not the (real or pretended) bitfield |
| operations. Define `SHIFT_COUNT_TRUNCATED' to be zero on such machines. |
| Instead, add patterns to the `md' file that include the implied truncation |
| of the shift instructions. |
| |
| You need not define this macro if it would always have the value of zero. */ |
| /* #define SHIFT_COUNT_TRUNCATED */ |
| |
| /* A C expression which is nonzero if on this machine it is safe to "convert" |
| an integer of INPREC bits to one of OUTPREC bits (where OUTPREC is smaller |
| than INPREC) by merely operating on it as if it had only OUTPREC bits. |
| |
| On many machines, this expression can be 1. |
| |
| When `TRULY_NOOP_TRUNCATION' returns 1 for a pair of sizes for modes for |
| which `MODES_TIEABLE_P' is 0, suboptimal code can result. If this is the |
| case, making `TRULY_NOOP_TRUNCATION' return 0 in such cases may improve |
| things. */ |
| #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 |
| |
| /* A C expression describing the value returned by a comparison operator with |
| an integral mode and stored by a store-flag instruction (`sCOND') when the |
| condition is true. This description must apply to *all* the `sCOND' |
| patterns and all the comparison operators whose results have a `MODE_INT' |
| mode. |
| |
| A value of 1 or -1 means that the instruction implementing the comparison |
| operator returns exactly 1 or -1 when the comparison is true and 0 when the |
| comparison is false. Otherwise, the value indicates which bits of the |
| result are guaranteed to be 1 when the comparison is true. This value is |
| interpreted in the mode of the comparison operation, which is given by the |
| mode of the first operand in the `sCOND' pattern. Either the low bit or the |
| sign bit of `STORE_FLAG_VALUE' be on. Presently, only those bits are used |
| by the compiler. |
| |
| If `STORE_FLAG_VALUE' is neither 1 or -1, the compiler will generate code |
| that depends only on the specified bits. It can also replace comparison |
| operators with equivalent operations if they cause the required bits to be |
| set, even if the remaining bits are undefined. For example, on a machine |
| whose comparison operators return an `SImode' value and where |
| `STORE_FLAG_VALUE' is defined as `0x80000000', saying that just the sign bit |
| is relevant, the expression |
| |
| (ne:SI (and:SI X (const_int POWER-OF-2)) (const_int 0)) |
| |
| can be converted to |
| |
| (ashift:SI X (const_int N)) |
| |
| where N is the appropriate shift count to move the bit being tested into the |
| sign bit. |
| |
| There is no way to describe a machine that always sets the low-order bit for |
| a true value, but does not guarantee the value of any other bits, but we do |
| not know of any machine that has such an instruction. If you are trying to |
| port GNU CC to such a machine, include an instruction to perform a |
| logical-and of the result with 1 in the pattern for the comparison operators |
| and let us know (*note How to Report Bugs: Bug Reporting.). |
| |
| Often, a machine will have multiple instructions that obtain a value from a |
| comparison (or the condition codes). Here are rules to guide the choice of |
| value for `STORE_FLAG_VALUE', and hence the instructions to be used: |
| |
| * Use the shortest sequence that yields a valid definition for |
| `STORE_FLAG_VALUE'. It is more efficient for the compiler to |
| "normalize" the value (convert it to, e.g., 1 or 0) than for |
| the comparison operators to do so because there may be |
| opportunities to combine the normalization with other |
| operations. |
| |
| * For equal-length sequences, use a value of 1 or -1, with -1 |
| being slightly preferred on machines with expensive jumps and |
| 1 preferred on other machines. |
| |
| * As a second choice, choose a value of `0x80000001' if |
| instructions exist that set both the sign and low-order bits |
| but do not define the others. |
| |
| * Otherwise, use a value of `0x80000000'. |
| |
| Many machines can produce both the value chosen for `STORE_FLAG_VALUE' and |
| its negation in the same number of instructions. On those machines, you |
| should also define a pattern for those cases, e.g., one matching |
| |
| (set A (neg:M (ne:M B C))) |
| |
| Some machines can also perform `and' or `plus' operations on condition code |
| values with less instructions than the corresponding `sCOND' insn followed |
| by `and' or `plus'. On those machines, define the appropriate patterns. |
| Use the names `incscc' and `decscc', respectively, for the the patterns |
| which perform `plus' or `minus' operations on condition code values. See |
| `rs6000.md' for some examples. The GNU Superoptizer can be used to find |
| such instruction sequences on other machines. |
| |
| You need not define `STORE_FLAG_VALUE' if the machine has no store-flag |
| instructions. */ |
| /* #define STORE_FLAG_VALUE */ |
| |
| /* A C expression that gives a non-zero floating point value that is returned |
| when comparison operators with floating-point results are true. Define this |
| macro on machine that have comparison operations that return floating-point |
| values. If there are no such operations, do not define this macro. */ |
| /* #define FLOAT_STORE_FLAG_VALUE */ |
| |
| /* An alias for the machine mode for pointers. On most machines, define this |
| to be the integer mode corresponding to the width of a hardware pointer; |
| `SImode' on 32-bit machine or `DImode' on 64-bit machines. On some machines |
| you must define this to be one of the partial integer modes, such as |
| `PSImode'. |
| |
| The width of `Pmode' must be at least as large as the value of |
| `POINTER_SIZE'. If it is not equal, you must define the macro |
| `POINTERS_EXTEND_UNSIGNED' to specify how pointers are extended to `Pmode'. */ |
| #define Pmode SImode |
| |
| /* An alias for the machine mode used for memory references to functions being |
| called, in `call' RTL expressions. On most machines this should be |
| `QImode'. */ |
| #define FUNCTION_MODE QImode |
| |
| /* A C expression for the maximum number of instructions above which the |
| function DECL should not be inlined. DECL is a `FUNCTION_DECL' node. |
| |
| The default definition of this macro is 64 plus 8 times the number of |
| arguments that the function accepts. Some people think a larger threshold |
| should be used on RISC machines. */ |
| /* #define INTEGRATE_THRESHOLD(DECL) */ |
| |
| /* Define this if the preprocessor should ignore `#sccs' directives and print |
| no error message. |
| |
| Defined in svr4.h. */ |
| /* #define SCCS_DIRECTIVE */ |
| |
| /* Define this macro if the system header files support C++ as well as C. This |
| macro inhibits the usual method of using system header files in C++, which |
| is to pretend that the file's contents are enclosed in `extern "C" {...}'. */ |
| /* #define NO_IMPLICIT_EXTERN_C */ |
| |
| /* Define this macro to handle System V style pragmas (particularly #pack). |
| |
| Defined in svr4.h. */ |
| #define HANDLE_SYSV_PRAGMA |
| |
| /* Define this macro if you want to handle #pragma weak (HANDLE_SYSV_PRAGMA |
| must also be defined). */ |
| /* #define HANDLE_WEAK_PRAGMA */ |
| |
| /* Define this macro if the assembler does not accept the character `$' in |
| label names. By default constructors and destructors in G++ have `$' in the |
| identifiers. If this macro is defined, `.' is used instead. |
| |
| Defined in svr4.h. */ |
| /* #define NO_DOLLAR_IN_LABEL */ |
| |
| /* Define this macro if the assembler does not accept the character `.' in |
| label names. By default constructors and destructors in G++ have names that |
| use `.'. If this macro is defined, these names are rewritten to avoid `.'. */ |
| /* #define NO_DOT_IN_LABEL */ |
| |
| /* Define this macro if the target system expects every program's `main' |
| function to return a standard "success" value by default (if no other value |
| is explicitly returned). |
| |
| The definition should be a C statement (sans semicolon) to generate the |
| appropriate rtl instructions. It is used only when compiling the end of |
| `main'. */ |
| /* #define DEFAULT_MAIN_RETURN */ |
| |
| /* Define this if your `exit' function needs to do something besides calling an |
| external function `_cleanup' before terminating with `_exit'. The |
| `EXIT_BODY' macro is only needed if `NEED_ATEXIT' is defined and |
| `ON_EXIT' is not defined. */ |
| /* #define EXIT_BODY */ |
| |
| /* Define this macro as a C expression that is nonzero if it is safe for the |
| delay slot scheduler to place instructions in the delay slot of INSN, even |
| if they appear to use a resource set or clobbered in INSN. INSN is always a |
| `jump_insn' or an `insn'; GNU CC knows that every `call_insn' has this |
| behavior. On machines where some `insn' or `jump_insn' is really a function |
| call and hence has this behavior, you should define this macro. |
| |
| You need not define this macro if it would always return zero. */ |
| /* #define INSN_SETS_ARE_DELAYED(INSN) */ |
| |
| /* Define this macro as a C expression that is nonzero if it is safe for the |
| delay slot scheduler to place instructions in the delay slot of INSN, even |
| if they appear to set or clobber a resource referenced in INSN. INSN is |
| always a `jump_insn' or an `insn'. On machines where some `insn' or |
| `jump_insn' is really a function call and its operands are registers whose |
| use is actually in the subroutine it calls, you should define this macro. |
| Doing so allows the delay slot scheduler to move instructions which copy |
| arguments into the argument registers into the delay slot of INSN. |
| |
| You need not define this macro if it would always return zero. */ |
| /* #define INSN_REFERENCES_ARE_DELAYED(INSN) */ |
| |
| /* In rare cases, correct code generation requires extra machine dependent |
| processing between the second jump optimization pass and delayed branch |
| scheduling. On those machines, define this macro as a C statement to act on |
| the code starting at INSN. */ |
| #define MACHINE_DEPENDENT_REORG(INSN) d30v_machine_dependent_reorg (INSN) |
| |
| /* Define this macro if in some cases global symbols from one translation unit |
| may not be bound to undefined symbols in another translation unit without |
| user intervention. For instance, under Microsoft Windows symbols must be |
| explicitly imported from shared libraries (DLLs). */ |
| /* #define MULTIPLE_SYMBOL_SPACES */ |
| |
| /* A C expression for the maximum number of instructions to execute via |
| conditional execution instructions instead of a branch. A value of |
| BRANCH_COST+1 is the default if the machine does not use cc0, and 1 if it |
| does use cc0. */ |
| #define MAX_CONDITIONAL_EXECUTE d30v_cond_exec |
| |
| #define D30V_DEFAULT_MAX_CONDITIONAL_EXECUTE 4 |
| |
| /* Values of the -mcond-exec=n string. */ |
| extern int d30v_cond_exec; |
| extern const char *d30v_cond_exec_string; |
| |
| #endif /* GCC_D30V_H */ |