| Tue Sep 9 00:33:24 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Version 0.5.21 released. |
| |
| Mon Sep 8 19:39:01 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libI77/close.c (f_exit): Fix thinko, inverted test |
| of whether initialization done, so exiting now closes |
| open units again. |
| |
| Tue Aug 26 01:42:21 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| From Jim Wilson: |
| * configure.in: Make sure RANLIB_TEST is set also. |
| |
| From Robert Lipe <robertl@dgii.com>: |
| * libU77/getcwd_.c, libU77/hostnm_.c, libU77/lstat_.c: |
| Also #include <errno.h>, to define ENOSYS. |
| |
| Tue Aug 26 01:25:58 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Makefile.in (stamp-lib): Put all f2cext.c objects in |
| a temp directory named libE77, then `ar' them all at |
| once into libf2c.a, to get the job done a bit faster. |
| Still remove the objects (and libE77 directory) afterward. |
| |
| Sun Aug 24 05:04:35 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libU77/rand_.c (G77_rand_0), libU77/dtime_.c (G77_dtime_0), |
| libU77/etime_.c (G77_etime_0), libU77/secnds_.c (G77_secnds_0), |
| libU77/second_.c (G77_second_0): Really return `double', not |
| `doublereal', since the result is cast to `float'. |
| * f2cext.c: (rand_, dtime_, etime_, secnds_, second_): Ditto. |
| (erf_, erfc_, besj0_, besj1_, besjn_, besy0_, besy1_, |
| besyn_, dbesj0_, dbesj1_, dbesjn_, dbesy0_, dbesy1_, |
| dbesyn_): All of these return `double', not `doublereal', |
| as they either have `float' or `double' results. |
| * libU77/bes.c (besj0_, besj1_, besjn_, besy0_, besy1_, |
| besyn_): Ditto. |
| * libU77/dbes.c (dbesj0_, dbesj1_, dbesjn_, dbesy0_, dbesy1_, |
| dbesyn_): Ditto. |
| |
| Update to Netlib version of 1997-08-16: |
| * libI77/iio.c: Fix bug in internal writes to an array |
| of character strings. |
| |
| * Makefile.in (UOBJ): Restore fixes made by Dan Pettet I |
| lost, which included the addition of mclock_.o already noted |
| below, plus adding symlnk_.o. |
| |
| Thu Aug 21 03:58:34 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Makefile.in (UOBJ): Add mclock_.o, thanks to Mumit Khan! |
| |
| 1997-08-21 Dave Love <d.love@dl.ac.uk> |
| |
| * libU77/alarm_.c: Fix return type: `integer'. |
| |
| Mon Aug 11 20:12:42 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Makefile.in ($(lib), stamp-lib): Ensure that library |
| gets fully updated even if updating was aborted earlier. |
| |
| * libU77/hostnm_.c (G77_hostnm_0): Return ENOSYS and stuff |
| in errno if system has no gethostname() function. |
| |
| * libU77/lstat_.c (G77_lstat_0): Return ENOSYS and stuff |
| in errno if system has no lstat() function. |
| |
| * libU77/getcwd_.c (G77_getcwd_0): Return ENOSYS and stuff |
| in errno if system has no getcwd() or getwd() function. |
| Test HAVE_GETCWD properly. |
| |
| * libU77/symlnk_.c (G77_symlink_0): Return ENOSYS and stuff |
| in errno if system has no symlink() function. |
| |
| * libU77/mclock_.c (G77_mclock_0): Return -1 if system |
| has no clock() function. |
| |
| Mon Aug 11 01:55:36 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Makefile.in (F2CEXT): Add `alarm' to this list. |
| |
| * f2cext.c (alarm_): Fix some typos in this function. |
| Delete third `status' argument. |
| |
| * libU77/alarm_.c: Delete third `status' argument, |
| as caller gets this from function result; return |
| status value as function result for caller. |
| |
| * configure.in: Rename `ac_cv_struct_FILE' to |
| `g77_cv_struct_FILE' according to 1997-06-26 change. |
| |
| 1997-08-06 Dave Love <d.love@dl.ac.uk> |
| |
| * libU77/vxtidate_.c: Correct day/month argument order. |
| * f2cext.c: Likewise. |
| |
| 1997-07-07 Dave Love <d.love@dl.ac.uk> |
| |
| * f2cext.c: Add alarm_. |
| |
| * Makefile.in, libU77/Makefile.in: Add alarm_. |
| |
| * libU77/alarm_.c: New file. |
| |
| 1997-06-26 Dave Love <d.love@dl.ac.uk> |
| |
| * configure.in: Generally use prefix `g77_' for cached values |
| we've invented, not `ac_'. |
| |
| Tue Jun 24 18:50:06 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libI77/ilnw.c (s_wsni): Call f_init() here. |
| (s_wsli): Ditto. |
| (e_wsli): Turn off "doing I/O" flag here. |
| |
| 1997-06-20 Dave Love <d.love@dl.ac.uk> |
| |
| * runtime/configure.in: Check for cygwin32 after Mumit Khan (but |
| differently); if cygwin32 define NON_UNIX_STDIO and don't define |
| NON_ANSI_RW_MODES. |
| |
| Tue Jun 01 06:26:29 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libI77/rsne.c (nl_init): Don't call f_init() here, |
| since s_rsne() already does. |
| (c_lir): Call f_init() here instead. |
| * libI77/rsli.c (e_rsli): Turn off "doing I/O" flag here. |
| * libI77/sue.c (e_rsue): Ditto. |
| |
| Sun Jun 22 23:27:22 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libI77/fio.h (err): Mark I/O as no longer in progress |
| before returning a non-zero error indicator (since |
| that tells the caller to jump over the remaining I/O |
| calls, including the corresponding `e_whatever' call). |
| * libI77/err.c (endif): Ditto. |
| * libI77/sfe.c (e_wsfe): Ditto. |
| * libI77/lread.c (ERR): Ditto. |
| * libI77/lread.c (l_read): Ditto by having quad case |
| use ERR, not return, to return non-zero error code. |
| |
| Sat Jun 21 12:31:28 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libI77/open.c (fk_open): Temporarily turn off |
| "doing I/O" flag during f_open() call to avoid recursive |
| I/O error. |
| |
| Tue Jun 17 22:40:47 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * err.c, close.c, rewind.c, inquire.c, backspace.c, endfile.c, |
| iio.c, open.c, Version.c, sfe.c, wsle.c, rsne.c, sue.c, rsfe.c, |
| lread.c, wsfe.c, fio.h, due.c, dfe.c: Change f__init from |
| `flag' to `int' and to signal not just whether initialization |
| has happened (bit 0), but also whether I/O is in progress |
| already (bit 1). Consistently produce a clear diagnostic |
| in cases of recursive I/O. Avoid infinite recursion in |
| f__fatal, in case sig_die triggers another error. Don't |
| output info on internals if not initialized in f__fatal. Don't |
| bother closing units in f_exit if initialization hasn't |
| happened. |
| |
| Tue Jun 10 12:57:44 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| Update to Netlib version of 1997-06-09: |
| * libI77/err.c, libI77/lread.c, libI77/rdfmt.c, |
| libI77/wref.c: Move some #include's around. |
| |
| Mon Jun 9 18:11:56 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libU77/kill_.c (kill_): KR_headers version needed |
| `*' in front of args in decls. |
| |
| Sun May 25 03:16:53 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| Update to Netlib version of 1997-05-24: |
| * libF77/README, libF77/Version.c, libF77/main.c, |
| libF77/makefile, libF77/s_paus.c, libF77/signal1.h, |
| libF77/signal_.c, libF77/z_div.c, libI77/Notice, |
| libI77/README, libI77/Version.c, libI77/dfe.c, |
| libI77/err.c, libI77/fmt.c, libI77/makefile, |
| libI77/rawio.h: Apply many, but not all, of the changes |
| made to libf2c since last update. |
| * libF77/Makefile.in (MISC), Makefile.in (MISC): Rename |
| exit.o to exit_.o to go along with Netlib. |
| * libF77/signal.c: Make the prologue much simpler than |
| Netlib has it. |
| |
| Sun May 18 20:56:02 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libU77/unlink_.c, libU77/stat_.c, libU77/symlnk_.c, |
| libU77/chmod_.c: g_char first arg is const. |
| |
| * libU77/chmod_.c: s_cat expects ftnlen[], not int[] or |
| integer[], change types of array and variables |
| accordingly. |
| |
| May 7 1997 Daniel Pettet <dan.pettet@bchydro.bc.ca> |
| |
| * libU77/dbes_.c: Commented out the code in the |
| same way the bes* routines are commented out. This |
| was done because corresponding C routines are referenced |
| directly in com-rt.def. |
| |
| Mon May 5 13:56:02 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libU77/stat_.c: Reverse KR/ANSI decls of g_char(). |
| |
| Apr 18 1997 Daniel Pettet <dan.pettet@bchydro.bc.ca> |
| |
| * libF77/F77_aloc.c, libF77/abort_.c, libF77/derf_.c, |
| libF77/derfc_.c, libF77/ef1asc_.c, libF77/ef1cmc_.c, |
| libF77/erf_.c, libF77/erfc_.c, libF77/exit.c, |
| libF77/getarg_.c, libF77/getenv_.c, libF77/iargc_.c, |
| libF77/s_cat.c, libF77/signal_.c, libF77/system_.c, |
| libI77/close.c, libI77/ftell_.c, libU77/access_.c, |
| libU77/bes.c, libU77/chdir_.c, libU77/chmod_.c, libU77/ctime_.c, |
| libU77/date_.c, libU77/dbes.c, libU77/dtime_.c, libU77/etime_.c, |
| libU77/fdate_.c, libU77/fgetc_.c, libU77/flush1_.c, |
| libU77/fnum_.c, libU77/fputc_.c, libU77/fstat_.c, |
| libU77/gerror_.c, libU77/getcwd_.c, libU77/getgid_.c, |
| libU77/getlog_.c, libU77/getpid_.c, libU77/getuid_.c, |
| libU77/gmtime_.c, libU77/hostnm_.c, libU77/idate_.c, |
| libU77/ierrno_.c, libU77/irand_.c, libU77/isatty_.c, |
| libU77/itime_.c, libU77/kill_.c, libU77/link_.c, |
| libU77/lnblnk_.c, libU77/ltime_.c, libU77/mclock_.c, |
| libU77/perror_.c, libU77/rand_.c, libU77/rename_.c, |
| libU77/secnds_.c, libU77/second_.c, libU77/sleep_.c, |
| libU77/srand_.c, libU77/stat_.c, libU77/symlnk_.c, |
| libU77/system_clock_.c, libU77/time_.c, libU77/ttynam_.c, |
| libU77/umask_.c, libU77/unlink_.c, libU77/vxtidate_.c, |
| libU77/vxttime_.c: Completed renaming routines that are directly |
| callable from g77 to internal names of the form |
| G77_xxxx_0 that are known as intrinsics by g77. |
| |
| Apr 8 1997 Daniel Pettet <dan.pettet@bchydro.bc.ca> |
| |
| * Makefile.in: Add libU77/mclock_.o and libU77/symlnk_.o to UOBJ. |
| * libU77/Makefile.in: Add mclock_.c to SRCS. |
| Add mclock_.o and symlnk_.o to OBJS. |
| Add mclock_.o dependency. |
| |
| Apr 8 1997 Daniel Pettet <dan.pettet@bchydro.bc.ca> |
| |
| * libU77/symlnk_.c: Added a couple of (char*) casts to malloc |
| to silence the compiler. |
| |
| 1997-03-17 Dave Love <d.love@dl.ac.uk> |
| |
| * libU77/access_.c, libU77/chdir_.c, libU77/chmod_.c, |
| libU77/link_.c, libU77/lstat_.c, libU77/rename_.c, libU77/stat_.c, |
| libU77/symlnk_.c, libU77/u77-test.f, libU77/unlink_.c: Strip |
| trailing blanks from file names for consistency with other |
| implementations (notably Sun's). |
| |
| * libU77/chmod_.c: Quote the file name given to the shell. |
| |
| Mon Mar 10 00:19:17 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libI77/uio.c (do_ud) [PAD_UDread]: Add semicolon to err() |
| invocation when macro not defined (from Mumit Khan |
| <khan@xraylith.wisc.edu>). |
| |
| Fri Feb 28 13:16:50 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Version 0.5.20 released. |
| |
| Wed Feb 26 20:28:53 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Makefile.in: $(MAKE) invocations now explicitly |
| specify `-f Makefile', just in case the `makefile's |
| from the netlib distribution would get used instead. |
| |
| Mon Feb 24 16:43:39 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libU77/Makefile.in (check): Specify driver, and |
| don't bother enabling already-enabled intrinsic groups. |
| Also, get the $(srcdir) version of u77-test.f. |
| |
| Sat Feb 22 14:08:42 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libU77/u77-test.f: Explicitly declare intrinsics, get |
| rid of useless CHARACTER declarations on intrinsics (maybe |
| someday appropriate to implement meaning of that in g77 |
| and restore them?). |
| Add spin loop just to fatten up the timings a bit. |
| Clarify ETIME output as having three fields. |
| Call TIME with CHARACTER*8, not CHARACTER*6, argument. |
| Call new SECOND intrinsic subroutine, after calling |
| new DUMDUM subroutine just to ensure the correct value |
| doesn't get left around in a register or something. |
| |
| Thu Feb 20 15:22:42 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libU77/bes.c: Comment out all the code, as g77 avoids actually |
| calling it, going directly to the system's library instead. |
| |
| Mon Feb 17 02:27:41 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libU77/fgetc_.c (fgetc_): Allow return value to be |
| CHARACTER*(*), properly handle CHARACTER*0 and blank-pad |
| CHARACTER*n where n>1. |
| |
| Tue Feb 11 14:12:19 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Makefile.in: Clarify role of $(srcdir) here. Fix |
| various targets accordingly. Don't rely at all on |
| gcc/f/include/ being a link to gcc/include/ -- just |
| use it directly. |
| (${srcdir}/configure, ${srcdir}/libU77/configure): |
| Remove the config.cache files in build directory before |
| cd'ing to source directory as well. |
| |
| * libF77/Makefile.in, libI77/Makefile.in (ALL_CFLAGS): |
| Include `-I.' to pick up build directory. |
| Use gcc/include/ directly. |
| * libU77/Makefile.in (ALL_CFLAGS): Include `-I$(srcdir)' |
| to pick up source directory. |
| (OBJS): Fix typo in `chmod_.o' (was `chmod.o'). |
| |
| Mon Feb 10 12:54:47 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Makefile.in (UOBJ), libU77/Makefile.in (OBJS): Add |
| libU77/chmod_.o to list of objects. |
| * libU77/chmod_.c: Fix up headers. |
| Fix implementation to not prematurely truncate command |
| string and make room for trailing null. |
| |
| * libU77/ctime_.c: Incoming xstime argument is now longint. |
| * libU77/mclock_.c: Now returns longint. |
| * libU77/time_.c: Now returns longint. |
| |
| 1997-02-10 Dave Love <d.love@dl.ac.uk> |
| |
| * etime_.c, dtime_.c: Typo rounded times to seconds. |
| |
| * date_.c: Add missing return. |
| |
| * hostnm_.c: #include unistd.h. |
| |
| Sat Feb 8 03:30:19 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| INTEGER*8 support built in to f2c.h and libf2c (since |
| gcc will be used to compile relevant code anyway): |
| * Makefile.in, libF77/Makefile.in: Add pow_qq.o, |
| qbitbits.o, and qbitshft.o to $POW and $F90BIT macros, |
| as appropriate. |
| * f2c.h.in: Define appropriate types and macros. |
| Place #error directive correctly. |
| * configure.in: Determine appropriate types for long |
| integer (F2C_LONGINT). |
| Meanwhile, quote strings in #error, for consistency. |
| Fix restoring of ac_cpp macro. |
| * configure: Regenerated using autoconf-2.12. |
| |
| * libF77/Version.c, libI77/Version.c, libU77/Version.c: |
| Update version numbers. |
| Change names and code for g77-specific version-printing |
| routines (shorter names should be safer to link on |
| weird, 8-char systems). |
| |
| * libF77/c_cos.c, libF77/c_div.c, libF77/c_exp.c, |
| libF77/c_log.c, libF77/c_sin.c, libF77/c_sqrt.c, |
| libF77/d_cnjg.c, libF77/pow_zi.c, libF77/r_cnjg.c, |
| libF77/z_cos.c, libF77/z_div.c, libF77/z_exp.c, |
| libF77/z_log.c, libF77/z_sin.c, libF77/z_sqrt.c: |
| Changed to work properly even when result is aliased |
| with any inputs. |
| |
| * libF77/makefile, libI77/makefile: Leave these in |
| the g77 distribution, so it is easier to track changes |
| to official libf2c. |
| |
| * libF77/signal_.c: Eliminate redundant `return 0;'. |
| |
| * libI77/fio.h (err, errfl): Fix these so they work |
| (and must be expressed) as statements. |
| Fix up many users of err() to include trailing semicolon. |
| |
| * Incorporate changes by Bell Labs to libf2c through 1997-02-07. |
| |
| 1997-02-06 Dave Love <d.love@dl.ac.uk> |
| |
| * libU77/etime_.c, libU77/dtime_.c: Fix getrusage stuff. |
| |
| * libU77/config.h.in: Regenerate for HAVE_GETRUSAGE. |
| |
| * libU77/Makefile.in, libI77/Makefile.in, libF77/Makefile.in: |
| Redo *clean targets; distclean and maintainer-clean remove the stage? |
| and include links. This probably want looking at further. |
| |
| Wed Feb 5 00:21:23 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| Add libU77 library from Dave Love <d.love@dl.ac.uk>: |
| * Makefile.in: Add libU77 directory, rules, etc. |
| * configure.in: New libU77 directory, Makefile, etc. |
| |
| * Makefile.in, libF77/Makefile.in, libI77/Makefile.in, |
| libU77/Makefile.in: Reorganize these so $(AR) commands |
| handled by the top-level Makefile instead of the |
| subordinates. This permits it to do $(AR) only when |
| one or more object files actually change, instead of |
| having to force-update it as was necessary before. |
| And that had the disadvantage of requiring, e.g., user |
| root to have access to $(AR) to the library simply to |
| install g77, which might be problematic on an NFS setup. |
| (mostlyclean, clean, distclean, maintainer-clean): |
| Properly handle these rules. |
| |
| * Makefile.in: Don't invoke config.status here -- let |
| compiler-level stuff handle all that. |
| |
| * err.c [MISSING_FILE_ELEMS]: Declare malloc in this case |
| too, so it doesn't end up as an integer. |
| |
| Sat Feb 1 02:43:48 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libF77/Makefile.in: More fixup for $(F90BIT) -- wasn't |
| in list for ar command, and it wasn't correctly listed |
| in the list of things depending on f2c.h. |
| |
| * f2c.h.in: Fix up #error directive. |
| |
| 1997-01-31 Dave Love <d.love@dl.ac.uk> |
| |
| * libF77/Makefile.in ($(lib)): Add $(F90BIT); shouldn't exclude |
| stuff f2c needs so we can share the library. |
| |
| Sat Jan 18 19:39:03 1997 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * configure.in: No longer define ALWAYS_FLUSH, the |
| resulting performance is too low. |
| |
| Wed Dec 18 12:06:02 1996 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| Patch from Mumit Khan <khan@xraylith.wisc.edu>: |
| * libF77/s_paus.c: Add __CYGWIN32__ to list of macros |
| controlling how to pause. |
| |
| Sun Dec 1 21:25:27 1996 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * configure: Regenerated using autoconf-2.12. |
| |
| Mon Nov 25 21:16:15 1996 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * configure: Regenerated using autoconf-2.11. |
| |
| 1996-11-19 Dave Love <d.love@dl.ac.uk> |
| |
| * libI77/backspace.c: Include sys/types.h for size_t. |
| |
| Wed Nov 6 14:17:27 1996 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * f2c.h.in: Properly comment out the unsupported stuff so |
| we don't get build-time errors. |
| |
| * libF77/Version.c, libI77/Version.c: Restore macro definition |
| of version information. |
| |
| * libI77/Makefile.in (OBJ): Add ftell_.o to list of objects. |
| |
| * libI77/uio.c (do_ud): Fix up casts in PAD_UDread case just |
| like they were fixed in the other case. |
| |
| Thu Oct 31 22:27:45 1996 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libI77/ftell_.c (fseek_): Map incoming whence argument to |
| system's actual SEEK_CUR, SEEK_SET, or SEEK_END macro for |
| fseek(), and crash (gracefully) if the argument is invalid. |
| |
| 1996-10-19 Dave Love <d.love@dl.ac.uk> |
| |
| * configure.in: Add check that we have the tools to cross-compile |
| if appropriate. |
| (NO_EOF_CHAR_CHECK,Skip_f2c_Undefs): Define. |
| |
| * libF77/Makefile.in (F90BIT): New routines from Netlib. |
| |
| * f2c.h.in: |
| Use more sanitary #error (indented for K&R compliance if necessary) if |
| f2c_i2 defined. |
| Sync with Netlib: Add `uninteger'. (Commented out) integer*8 stuff. |
| bit_{test,clear,set} macros. |
| |
| 1996-10-19 Dave Love <d.love@dl.ac.uk> |
| |
| Update to Netlib version of 1996-09-26. |
| |
| * libI77/Version.c: Use <stdio.h>, not "stdio.h". |
| * libF77/Version.c: Likewise. |
| |
| Wed Aug 28 13:25:29 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * libI77/rsne.c (x_rsne): Use size_t instead of int. |
| |
| * libI77/endfile.c (copy): Use size_t in place of int. |
| |
| Wed Aug 28 13:22:20 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * libI77/backspace.c (f_back): Cast fread arg to size_t. |
| |
| Tue Aug 27 19:11:30 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * libI77/Version.c: Supply */ to avoid apparent nested comment. |
| |
| Tue Aug 20 09:21:43 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * libF77/Makefile.in (ALL_CFLAGS): Fix missing ../ for include. |
| * libI77/Makefile.in (ALL_CFLAGS): Likewise. |
| |
| Sat Aug 17 13:00:47 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * (libF77/qbitshft.c, libF77/qbitbits.c, libF77/lbitshft.c, |
| libF77/lbitbits.c): New file from Netlib. qbit... not currently |
| compiled. |
| |
| Sun Jul 7 18:06:33 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * libF77/z_sqrt.c, libF77/z_sin.c, libF77/z_exp.c, libF77/z_log.c, |
| libF77/system_.c, libF77/z_cos.c, libF77/signal_.c, |
| libF77/s_stop.c, libF77/sig_die.c, libF77/s_paus.c, |
| libF77/s_rnge.c, libF77/s_cat.c, libF77/r_tan.c, libF77/r_tanh.c, |
| libF77/r_sinh.c, libF77/r_sqrt.c, libF77/r_sin.c, libF77/r_mod.c, |
| libF77/r_nint.c, libF77/r_lg10.c, libF77/r_log.c, libF77/r_exp.c, |
| libF77/r_int.c, libF77/r_cosh.c, libF77/r_atn2.c, libF77/r_cos.c, |
| libF77/r_asin.c, libF77/r_atan.c, libF77/r_acos.c, |
| libF77/pow_dd.c, libF77/pow_zz.c, libF77/main.c, libF77/i_dnnt.c, |
| libF77/i_nint.c, libF77/h_dnnt.c, libF77/h_nint.c, libF77/exit.c, |
| libF77/d_tan.c, libF77/d_tanh.c, libF77/d_sqrt.c, libF77/d_sin.c, |
| libF77/d_sinh.c, libF77/d_mod.c, libF77/d_nint.c, libF77/d_log.c, |
| libF77/d_int.c, libF77/d_lg10.c, libF77/d_cosh.c, libF77/d_exp.c, |
| libF77/d_atn2.c, libF77/d_cos.c, libF77/d_atan.c, libF77/d_acos.c, |
| libF77/d_asin.c, libF77/c_sqrt.c, libF77/cabs.c, libF77/c_sin.c, |
| libF77/c_exp.c, libF77/c_log.c, libF77/c_cos.c, libF77/F77_aloc.c, |
| libF77/abort_.c, libI77/xwsne.c, libI77/wref.c, libI77/util.c, |
| libI77/uio.c, libI77/rsne.c, libI77/rdfmt.c, libI77/rawio.h, |
| libI77/open.c, libI77/lread.c, libI77/inquire.c, libI77/fio.h, |
| libI77/err.c, libI77/endfile.c, libI77/close.c: |
| Use #include <...>, not #include "..." for mkdeps |
| |
| Sat Jul 6 21:39:21 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * libI77/ftell_.c: Added from Netlib distribution. |
| |
| Sat Mar 30 20:57:24 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * configure.in: Eliminate explicit use of |
| {RANLIB,AR}_FOR_TARGET. |
| * Makefile.in: Likewise. |
| * libF77/Makefile.in: Likewise. |
| * libI77/Makefile.in: Likewise. |
| * configure: Regenerated. |
| |
| Sat Mar 30 21:02:03 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * Makefile.in: Eliminate explicit use of |
| {RANLIB,AR}_FOR_TARGET. |
| |
| Tue Mar 26 23:39:59 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * Makefile.in: Remove hardwired RANLIB and RANLIB_TEST (unnoted |
| change). |
| |
| Mon Mar 25 21:04:56 1996 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Incorporate changes by Bell Labs to libf2c through 1996-03-23, |
| including changes to dmg and netlib email addresses. |
| |
| Tue Mar 19 13:10:02 1996 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Incorporate changes by AT&T/Bellcore to libf2c through 1996-03-19. |
| |
| * Makefile.in (rebuilt): New target. |
| |
| * lib[FI]77/Makefile.in: Use $AR_FOR_TARGET, not $AR. |
| |
| Tue Mar 19 12:53:19 1996 Dave Love <d.love@dl.ac.uk> |
| |
| * configure.in (ac_cpp): #include <stdio.h> instead |
| of <features.h>. |
| |
| Tue Mar 19 12:52:09 1996 Mumit Khan <khan@xraylith.wisc.edu> |
| |
| * configure.in (ac_cpp): For f2c integer type, |
| add -I$srcdir/../.. to make it work on mips-ultrix4.2. |
| |
| Sat Mar 9 17:37:15 1996 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * libI77/Makefile.in (.c.o): Add -DAllow_TYQUAD, to enable |
| I/O support for INTEGER*8. |
| * f2c.h.in: Turn on longint type. |
| |
| Fri Dec 29 18:22:01 1995 Craig Burley <burley@gnu.ai.mit.edu> |
| |
| * Makefile.in: Reorganize the *clean rules to more closely |
| parallel gcc's. |
| |
| * lib[FI]77/Makefile.in: Ignore error from $(AR) command, |
| in case just doing an install and installer has no write |
| access to library (this is a kludge fix -- perhaps install |
| targets should never try updating anything?). |
| |
| Sat Nov 18 19:37:22 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * Version 0.5.17 released. |
| |
| Thu Nov 16 07:20:35 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * Incorporate changes by AT&T/Bellcore to libf2c through 1995-11-15. |
| |
| Fri Sep 22 02:19:59 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * libI77/backspace.c, libI77/close.c, libI77/endfile.c, |
| libI77/fio.h, libI77/inquire.c, libI77/rawio.h, |
| libF77/s_paus.c: Not an MSDOS system if GO32 |
| is defined, in the sense that the run-time environment |
| is thus more UNIX-like. |
| |
| Wed Sep 20 02:24:51 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * libF77/Makefile.in, libI77/Makefile.in: Comment out `ld -r -x' |
| and `mv' line pairs, since `-x' isn't supported on systems |
| such as Solaris, and these lines don't seem to do anything |
| useful after all. |
| |
| Wed Aug 30 15:58:35 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * Version 0.5.16 released. |
| |
| * Incorporate changes by AT&T/Bellcore to libf2c through 950829. |
| |
| Mon Aug 28 12:50:34 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * libF77/Makefile.in, libI77/Makefile.in ($(lib)): Force ar'ing |
| and ranlib'ing of libf2c.a, else after rm'ing libf2c.a and |
| doing a make, only libI77 or libF77 would be added to |
| the newly created archive. |
| Also, instead of `$?' list all targets explicitly so all |
| objects are updated in libf2c.a even if only one actually |
| needs recompiling, for similar reason -- we can't easily tell |
| if a given object is really up-to-date in libf2c.a, or even |
| present there. |
| |
| Sun Aug 27 14:54:24 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * libF77/Makefile.in, libI77/Makefile.in: Fix spacing so |
| initial tabs are present in all appropriate places. |
| Move identical $(AR) commands in if then/else clauses |
| to single command preceding if. |
| (.c.o, Version[FI].o): Use $@ instead of $* because AIX (RS/6000) |
| says $@ means source, not object, basename, and $@ seems to work |
| everywhere. |
| |
| Wed Aug 23 15:44:25 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * libF77/system_.c (system_): Declare as returning `ftnint', |
| consistent with signal_, instead of defaulting to `int'. |
| Hope dmg@research.att.com agrees, else probably will |
| change to whatever he determines is correct (and change |
| g77 accordingly). |
| |
| Thu Aug 17 08:46:17 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * libI77/rsne.c (s_rsne): Call f_init if not already done. |
| |
| Thu Aug 17 04:35:28 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * Incorporate changes by Bellcore to libf2c through 950817. |
| And this text is for EMACS: (foo at bar). |
| |
| Wed Aug 16 17:33:06 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * libF77/Makefile.in, libI77/Makefile.in (CFLAGS): Put -g1 |
| after configured CFLAGS but before GCC_CFLAGS, so by default |
| the libraries are built with minimal debugging information. |
| |
| Fri Jul 28 10:30:15 1995 Dave Love <d.love@dl.ac.uk> |
| |
| * libI77/open.c (f_open): Call f_init if not already done. |
| |
| Sat Jul 1 19:31:56 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * libF77/system_.c (system_): Make buff one byte bigger so |
| following byte doesn't get overwritten by call with large |
| string. |
| |
| Tue Jun 27 23:28:16 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * Incorporate changes by Bellcore to libf2c through 950613. |
| |
| * libF77/Version.c (__G77_LIBF77_VERSION__): Add this string |
| to track g77 mods to libf2c. |
| |
| * libI77/Version.c (__G77_LIBI77_VERSION__): Add this string |
| to track g77 mods to libf2c. |
| |
| * libI77/rawio.h: #include <rawio.h> only conditionally, |
| using macro intended for that purpose. |
| |
| Fri May 19 11:20:00 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * configure.in: Incorporate change made by d.love, |
| |
| * configure: Regenerated. |
| |
| Wed Apr 26 21:08:57 BST 1995 Dave Love <d.love@dl.ac.uk> |
| |
| * configure.in: Fix quoting problem in atexit check. |
| |
| * configure: Regenerated (with current autoconf). |
| |
| Wed Mar 15 12:49:58 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * Incorporate changes by Bellcore to libf2c through 950315. |
| |
| Sun Mar 5 18:54:29 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * README: Tell people not to read lib[fi]77/README. |
| |
| Wed Feb 15 14:30:58 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * configure.in: Update copyright notice at top of file. |
| |
| * f2c.h.in (f2c_i2): Make sure defining this crashes compilations. |
| |
| * libI77/Makefile.in (F2C_H): Fix typo in definition of this |
| symbol (was FF2C_H=...). |
| |
| Sun Feb 12 13:39:36 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * README: Remove some obsolete items. |
| Add date. |
| |
| * TODO: Add date. |
| |
| Sat Feb 11 22:07:54 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * Makefile.in (libf77, libi77): Add rules to .PHONY list. |
| |
| * f2c.h.in (flag): Make same type as friends. |
| |
| * libF77/Makefile.in (libf77): Rename to $(lib), remove from |
| .PHONY list. Fix some typos. |
| |
| * libI77/Makefile.in (libi77): Rename to $(lib), remove from |
| .PHONY list. Fix some typos. |
| |
| Thu Feb 2 12:22:41 1995 Craig Burley (burley@gnu.ai.mit.edu) |
| |
| * Makefile.in (libF77/Makefile): Fix typos in this rule's name |
| and dependencies. |
| |
| * libF77/Makefile.in (libf77): Add rule to .PHONY list. |
| |
| * libI77/Makefile.in (libi77): Add rule to .PHONY list. |
