blob: 16885f95f0e16a95118128171123c15f93257048 [file] [log] [blame]
# Configure fragment invoked in the post-target section for subdirs
# wanting multilib support.
#
# It is advisable to support a few --enable/--disable options to let the
# user select which libraries s/he really wants.
#
# Subdirectories wishing to use multilib should put the following lines
# in the "post-target" section of configure.in.
#
# if [ "${srcdir}" = "." ] ; then
# if [ "${with_target_subdir}" != "." ] ; then
# . ${with_multisrctop}../../config-ml.in
# else
# . ${with_multisrctop}../config-ml.in
# fi
# else
# . ${srcdir}/../config-ml.in
# fi
#
#
# Things are complicated because 6 separate cases must be handled:
# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6.
#
# srcdir=. is special. It must handle make programs that don't handle VPATH.
# To implement this, a symlink tree is built for each library and for each
# multilib subdir.
#
# The build tree is layed out as
#
# ./
# newlib
# m68020/
# newlib
# m68881/
# newlib
#
# The nice feature about this arrangement is that inter-library references
# in the build tree work without having to care where you are. Note that
# inter-library references also work in the source tree because symlink trees
# are built when srcdir=.
#
# Unfortunately, trying to access the libraries in the build tree requires
# the user to manually choose which library to use as GCC won't be able to
# find the right one. This is viewed as the lesser of two evils.
#
# Configure variables:
# ${with_target_subdir} = "." for native, or ${target_alias} for cross.
# Set by top level Makefile.
# ${with_multisrctop} = how many levels of multilibs there are in the source
# tree. It exists to handle the case of configuring in the source tree:
# ${srcdir} is not constant.
# ${with_multisubdir} = name of multilib subdirectory (eg: m68020/m68881).
#
# Makefile variables:
# MULTISRCTOP = number of multilib levels in source tree (+1 if cross)
# (FIXME: note that this is different than ${with_multisrctop}. Check out.).
# MULTIBUILDTOP = number of multilib levels in build tree
# MULTIDIRS = list of multilib subdirs (eg: m68000 m68020 ...)
# (only defined in each library's main Makefile).
# MULTISUBDIR = installed subdirectory name with leading '/' (eg: /m68000)
# (only defined in each multilib subdir).
# FIXME: Multilib is currently disabled by default for everything other than
# newlib. It is up to each target to turn on multilib support for the other
# libraries as desired.
# We have to handle being invoked by both Cygnus configure and Autoconf.
#
# Cygnus configure incoming variables:
# srcdir, subdir, host, arguments
#
# Autoconf incoming variables:
# srcdir, host, ac_configure_args
#
# We *could* figure srcdir and host out, but we'd have to do work that
# our caller has already done to figure them out and requiring these two
# seems reasonable.
# Note that `host' in this case is GCC's `target'. Target libraries are
# configured for a particular host.
if [ -n "${ac_configure_args}" ]; then
Makefile=${ac_file-Makefile}
ml_config_shell=${CONFIG_SHELL-/bin/sh}
ml_arguments="${ac_configure_args}"
ml_realsrcdir=${srcdir}
else
Makefile=${Makefile-Makefile}
ml_config_shell=${config_shell-/bin/sh}
ml_arguments="${arguments}"
if [ -n "${subdir}" -a "${subdir}" != "." ] ; then
ml_realsrcdir=${srcdir}/${subdir}
else
ml_realsrcdir=${srcdir}
fi
fi
# Scan all the arguments and set all the ones we need.
ml_verbose=--verbose
for option in ${ml_arguments}
do
case $option in
--*) ;;
-*) option=-$option ;;
esac
case $option in
--*=*)
optarg=`echo $option | sed -e 's/^[^=]*=//'`
;;
esac
case $option in
--disable-*)
enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
eval $enableopt=no
;;
--enable-*)
case "$option" in
*=*) ;;
*) optarg=yes ;;
esac
enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
eval $enableopt="$optarg"
;;
--norecursion | --no*)
ml_norecursion=yes
;;
--silent | --sil* | --quiet | --q*)
ml_verbose=--silent
;;
--verbose | --v | --verb*)
ml_verbose=--verbose
;;
--with-*)
case "$option" in
*=*) ;;
*) optarg=yes ;;
esac
withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
eval $withopt="$optarg"
;;
--without-*)
withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
eval $withopt=no
;;
esac
done
# Only do this if --enable-multilib.
if [ "${enable_multilib}" = yes ]; then
# Compute whether this is the library's top level directory
# (ie: not a multilib subdirectory, and not a subdirectory like newlib/src).
# ${with_multisubdir} tells us we're in the right branch, but we could be
# in a subdir of that.
# ??? The previous version could void this test by separating the process into
# two files: one that only the library's toplevel configure.in ran (to
# configure the multilib subdirs), and another that all configure.in's ran to
# update the Makefile. It seemed reasonable to collapse all multilib support
# into one file, but it does leave us with having to perform this test.
ml_toplevel_p=no
if [ -z "${with_multisubdir}" ]; then
if [ "${srcdir}" = "." ]; then
# Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
# ${with_target_subdir} = "." for native, otherwise target alias.
if [ "${with_target_subdir}" = "." ]; then
if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
ml_toplevel_p=yes
fi
else
if [ -f ${ml_realsrcdir}/../../config-ml.in ]; then
ml_toplevel_p=yes
fi
fi
else
# Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
ml_toplevel_p=yes
fi
fi
fi
# If this is the library's top level directory, set multidirs to the
# multilib subdirs to support. This lives at the top because we need
# `multidirs' set right away.
if [ "${ml_toplevel_p}" = yes ]; then
multidirs=
for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
dir=`echo $i | sed -e 's/;.*$//'`
if [ "${dir}" = "." ]; then
true
else
if [ -z "${multidirs}" ]; then
multidirs="${dir}"
else
multidirs="${multidirs} ${dir}"
fi
fi
done
# Target libraries are configured for the host they run on, so we check
# $host here, not $target.
case "${host}" in
arc-*-elf*)
if [ x$enable_biendian != xyes ]
then
old_multidirs=${multidirs}
multidirs=""
for x in ${old_multidirs}; do
case "${x}" in
*be*) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
;;
arm-*-*)
if [ x"$enable_fpu" = xno ]
then
old_multidirs=${multidirs}
multidirs=""
for x in ${old_multidirs}; do
case "${x}" in
*fpu*) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x"$enable_26bit" = xno ]
then
old_multidirs=${multidirs}
multidirs=""
for x in ${old_multidirs}; do
case "${x}" in
*26bit*) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x"$enable_underscore" = xno ]
then
old_multidirs=${multidirs}
multidirs=""
for x in ${old_multidirs}; do
case "${x}" in
*under*) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x"$enable_interwork" = xno ]
then
old_multidirs=${multidirs}
multidirs=""
for x in ${old_multidirs}; do
case "${x}" in
*interwork*) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*le* ) : ;;
*be* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x"$enable_nofmult" = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*nofmult* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
;;
m68*-*-*)
if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*soft-float* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_m68881 = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*m68881* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_m68000 = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*m68000* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_m68020 = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*m68020* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
;;
mips*-*-*)
if [ x$enable_single_float = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*single* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*el* ) : ;;
*eb* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*soft-float* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
case " $multidirs " in
*" mabi=64 "*)
# We will not be able to create libraries with -mabi=64 if
# we cannot even link a trivial program. It usually
# indicates the 64bit libraries are missing.
if echo 'main() {}' > conftest.c &&
${CC-gcc} -mabi=64 conftest.c -o conftest; then
:
else
echo Could not link program with -mabi=64, disabling it.
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*mabi=64* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
rm -f conftest.c conftest
;;
esac
;;
powerpc*-*-* | rs6000*-*-*)
if [ x$enable_aix64 = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*ppc64* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_pthread = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*pthread* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*soft-float* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_powercpu = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
power | */power | */power/* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_powerpccpu = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*powerpc* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_powerpcos = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*mcall-linux* | *mcall-solaris* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*mlittle* | *mbig* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_sysv = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*mcall-sysv* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
if [ x$enable_aix = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*mcall-aix* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
;;
sparc*-*-*)
case " $multidirs " in
*" m64 "*)
# We will not be able to create libraries with -m64 if
# we cannot even link a trivial program. It usually
# indicates the 64bit libraries are missing.
if echo 'main() {}' > conftest.c &&
${CC-gcc} -m64 conftest.c -o conftest; then
:
else
echo Could not link program with -m64, disabling it.
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*m64* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
rm -f conftest.c conftest
;;
esac
;;
esac
# Remove extraneous blanks from multidirs.
# Tests like `if [ -n "$multidirs" ]' require it.
multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ][ ]*/ /g'`
# Add code to library's top level makefile to handle building the multilib
# subdirs.
cat > Multi.tem <<\EOF
# FIXME: There should be an @-sign in front of the `if'.
# Leave out until this is tested a bit more.
multi-do:
if [ -z "$(MULTIDIRS)" ]; then \
true; \
else \
rootpre=`pwd`/; export rootpre; \
srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
compiler="$(CC)"; \
for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
if [ "$${dir}" = "." ]; then \
true; \
else \
if [ -d ../$${dir}/$${lib} ]; then \
flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(CFLAGS) $${flags}" \
prefix="$(prefix)" \
exec_prefix="$(exec_prefix)" \
GCJFLAGS="$(GCJFLAGS) $${flags}" \
CXXFLAGS="$(CXXFLAGS) $${flags}" \
LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
LDFLAGS="$(LDFLAGS) $${flags}" \
$(DO)); then \
true; \
else \
exit 1; \
fi; \
else true; \
fi; \
fi; \
done; \
fi
# FIXME: There should be an @-sign in front of the `if'.
# Leave out until this is tested a bit more.
multi-clean:
if [ -z "$(MULTIDIRS)" ]; then \
true; \
else \
lib=`pwd | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
for dir in Makefile $(MULTIDIRS); do \
if [ -f ../$${dir}/$${lib}/Makefile ]; then \
if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
then true; \
else exit 1; \
fi; \
else true; \
fi; \
done; \
fi
EOF
cat ${Makefile} Multi.tem > Makefile.tem
rm -f ${Makefile} Multi.tem
mv Makefile.tem ${Makefile}
fi # ${ml_toplevel_p} = yes
if [ "${ml_verbose}" = --verbose ]; then
echo "Adding multilib support to Makefile in ${ml_realsrcdir}"
if [ "${ml_toplevel_p}" = yes ]; then
echo "multidirs=${multidirs}"
fi
echo "with_multisubdir=${with_multisubdir}"
fi
if [ "${srcdir}" = "." ]; then
if [ "${with_target_subdir}" != "." ]; then
ml_srcdotdot="../"
else
ml_srcdotdot=""
fi
else
ml_srcdotdot=""
fi
if [ -z "${with_multisubdir}" ]; then
ml_subdir=
ml_builddotdot=
: # ml_srcdotdot= # already set
else
ml_subdir="/${with_multisubdir}"
# The '[^/][^/]*' appears that way to work around a SunOS sed bug.
ml_builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`/
if [ "$srcdir" = "." ]; then
ml_srcdotdot=${ml_srcdotdot}${ml_builddotdot}
else
: # ml_srcdotdot= # already set
fi
fi
if [ "${ml_toplevel_p}" = yes ]; then
ml_do='$(MAKE)'
ml_clean='$(MAKE)'
else
ml_do=true
ml_clean=true
fi
# TOP is used by newlib and should not be used elsewhere for this purpose.
# MULTI{SRC,BUILD}TOP are the proper ones to use. MULTISRCTOP is empty
# when srcdir != builddir. MULTIBUILDTOP is always some number of ../'s.
# FIXME: newlib needs to be updated to use MULTI{SRC,BUILD}TOP so we can
# delete TOP. Newlib may wish to continue to use TOP for its own purposes
# of course.
# MULTIDIRS is non-empty for the cpu top level Makefile (eg: newlib/Makefile)
# and lists the subdirectories to recurse into.
# MULTISUBDIR is non-empty in each cpu subdirectory's Makefile
# (eg: newlib/h8300h/Makefile) and is the installed subdirectory name with
# a leading '/'.
# MULTIDO is used for targets like all, install, and check where
# $(FLAGS_TO_PASS) augmented with the subdir's compiler option is needed.
# MULTICLEAN is used for the *clean targets.
#
# ??? It is possible to merge MULTIDO and MULTICLEAN into one. They are
# currently kept separate because we don't want the *clean targets to require
# the existence of the compiler (which MULTIDO currently requires) and
# therefore we'd have to record the directory options as well as names
# (currently we just record the names and use --print-multi-lib to get the
# options).
sed -e "s:^TOP[ ]*=[ ]*\([./]*\)[ ]*$:TOP = ${ml_builddotdot}\1:" \
-e "s:^MULTISRCTOP[ ]*=.*$:MULTISRCTOP = ${ml_srcdotdot}:" \
-e "s:^MULTIBUILDTOP[ ]*=.*$:MULTIBUILDTOP = ${ml_builddotdot}:" \
-e "s:^MULTIDIRS[ ]*=.*$:MULTIDIRS = ${multidirs}:" \
-e "s:^MULTISUBDIR[ ]*=.*$:MULTISUBDIR = ${ml_subdir}:" \
-e "s:^MULTIDO[ ]*=.*$:MULTIDO = $ml_do:" \
-e "s:^MULTICLEAN[ ]*=.*$:MULTICLEAN = $ml_clean:" \
${Makefile} > Makefile.tem
rm -f ${Makefile}
mv Makefile.tem ${Makefile}
# If this is the library's top level, configure each multilib subdir.
# This is done at the end because this is the loop that runs configure
# in each multilib subdir and it seemed reasonable to finish updating the
# Makefile before going on to configure the subdirs.
if [ "${ml_toplevel_p}" = yes ]; then
# We must freshly configure each subdirectory. This bit of code is
# actually partially stolen from the main configure script. FIXME.
if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
if [ "${ml_verbose}" = --verbose ]; then
echo "Running configure in multilib subdirs ${multidirs}"
echo "pwd: `pwd`"
fi
ml_origdir=`pwd`
ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
# cd to top-level-build-dir/${with_target_subdir}
cd ..
for ml_dir in ${multidirs}; do
if [ "${ml_verbose}" = --verbose ]; then
echo "Running configure in multilib subdir ${ml_dir}"
echo "pwd: `pwd`"
fi
if [ -d ${ml_dir} ]; then true; else
# ``mkdir -p ${ml_dir}'' See also mkinstalldirs.
pathcomp=""
for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do
pathcomp="$pathcomp$d"
case "$pathcomp" in
-* ) pathcomp=./$pathcomp ;;
esac
if test ! -d "$pathcomp"; then
echo "mkdir $pathcomp" 1>&2
mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
fi
if test ! -d "$pathcomp"; then
exit $lasterr
fi
pathcomp="$pathcomp/"
done
fi
if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
# Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
dotdot=../`echo ${ml_dir} | sed -e 's|[^/]||g' -e 's|/|../|g'`
case ${srcdir} in
".")
echo Building symlink tree in `pwd`/${ml_dir}/${ml_libdir}
if [ "${with_target_subdir}" != "." ]; then
ml_unsubdir="../"
else
ml_unsubdir=""
fi
(cd ${ml_dir}/${ml_libdir};
../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "")
if [ -f ${ml_dir}/${ml_libdir}/Makefile ]; then
if [ x"${MAKE}" = x ]; then
(cd ${ml_dir}/${ml_libdir}; make distclean)
else
(cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean)
fi
fi
ml_newsrcdir="."
ml_srcdiroption=
multisrctop=${dotdot}
;;
*)
case "${srcdir}" in
/* | [A-Za-z]:[\\/]* ) # absolute path
ml_newsrcdir=${srcdir}
;;
*) # otherwise relative
ml_newsrcdir=${dotdot}${srcdir}
;;
esac
ml_srcdiroption="-srcdir=${ml_newsrcdir}"
multisrctop=
;;
esac
case "${progname}" in
/* | [A-Za-z]:[\\/]* ) ml_recprog=${progname} ;;
*) ml_recprog=${dotdot}${progname} ;;
esac
# FIXME: POPDIR=${PWD=`pwd`} doesn't work here.
ML_POPDIR=`pwd`
cd ${ml_dir}/${ml_libdir}
if [ -f ${ml_newsrcdir}/configure ]; then
ml_recprog="${ml_newsrcdir}/configure --cache-file=../config.cache"
fi
# find compiler flag corresponding to ${ml_dir}
for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
dir=`echo $i | sed -e 's/;.*$//'`
if [ "${dir}" = "${ml_dir}" ]; then
flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`
break
fi
done
ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags" GCJ="${GCJ_}$flags"'
if [ "${with_target_subdir}" = "." ]; then
CC_=$CC' '
CXX_=$CXX' '
GCJ_=$GCJ' '
else
# Create a regular expression that matches any string as long
# as ML_POPDIR.
popdir_rx=`echo ${ML_POPDIR} | sed 's,.,.,g'`
CC_=
for arg in ${CC}; do
case $arg in
-[BIL]"${ML_POPDIR}"/*)
CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;;
"${ML_POPDIR}"/*)
CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
*)
CC_="${CC_}${arg} " ;;
esac
done
CXX_=
for arg in ${CXX}; do
case $arg in
-[BIL]"${ML_POPDIR}"/*)
CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
"${ML_POPDIR}"/*)
CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
*)
CXX_="${CXX_}${arg} " ;;
esac
done
GCJ_=
for arg in ${GCJ}; do
case $arg in
-[BIL]"${ML_POPDIR}"/*)
GCJ_="${GCJ_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
"${ML_POPDIR}"/*)
GCJ_="${GCJ_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
*)
GCJ_="${GCJ_}${arg} " ;;
esac
done
if test "x${LD_LIBRARY_PATH+set}" = xset; then
LD_LIBRARY_PATH_=
for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do
case "$arg" in
"${ML_POPDIR}"/*)
arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
;;
esac
if test "x$LD_LIBRARY_PATH_" != x; then
LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg
else
LD_LIBRARY_PATH_=$arg
fi
done
ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_"
fi
if test "x${SHLIB_PATH+set}" = xset; then
SHLIB_PATH_=
for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do
case "$arg" in
"${ML_POPDIR}"/*)
arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
;;
esac
if test "x$SHLIB_PATH_" != x; then
SHLIB_PATH_=$SHLIB_PATH_:$arg
else
SHLIB_PATH_=$arg
fi
done
ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_"
fi
fi
if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \
--with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
${ml_arguments} ${ml_srcdiroption} ; then
true
else
exit 1
fi
cd ${ML_POPDIR}
done
cd ${ml_origdir}
fi
fi # ${ml_toplevel_p} = yes
fi # ${enable_multilib} = yes