| # Copyright (c) 1999, 2000, 2001, 2002, 2003 by Red Hat, Inc. All rights reserved. |
| # |
| # THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED |
| # OR IMPLIED. ANY USE IS AT YOUR OWN RISK. |
| # |
| # Permission is hereby granted to use or copy this program |
| # for any purpose, provided the above notices are retained on all copies. |
| # Permission to modify the code and to distribute modified code is granted, |
| # provided the above notices are retained, and a notice that the code was |
| # modified is included with the above copyright notice. |
| # |
| # Original author: Tom Tromey |
| |
| dnl Process this file with autoconf to produce configure. |
| |
| AC_INIT(gcj_mlc.c) |
| |
| # This works around the fact that libtool configuration may change LD |
| # for this particular configuration, but some shells, instead of |
| # keeping the changes in LD private, export them just because LD is |
| # exported. |
| ORIGINAL_LD_FOR_MULTILIBS=$LD |
| |
| dnl Can't be done in GC_CONFIGURE because that confuses automake. |
| AC_CONFIG_AUX_DIR(.) |
| |
| GC_CONFIGURE(.) |
| |
| AM_PROG_LIBTOOL |
| |
| dnl We use these options to decide which functions to include. |
| AC_ARG_WITH(target-subdir, |
| [ --with-target-subdir=SUBDIR |
| configuring with a cross compiler]) |
| AC_ARG_WITH(cross-host, |
| [ --with-cross-host=HOST configuring with a cross compiler]) |
| |
| AM_MAINTAINER_MODE |
| # automake wants to see AC_EXEEXT. But we don't need it. And having |
| # it is actually a problem, because the compiler we're passed can't |
| # necessarily do a full link. So we fool automake here. |
| if false; then |
| # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands |
| # to nothing, so nothing would remain between `then' and `fi' if it |
| # were not for the `:' below. |
| : |
| AC_EXEEXT |
| fi |
| |
| AC_MSG_CHECKING([for thread model used by GCC]) |
| THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'` |
| if test -z "$THREADS"; then |
| THREADS=no |
| fi |
| AC_MSG_RESULT([$THREADS]) |
| |
| AC_ARG_ENABLE(parallel-mark, |
| [ --enable-parallel-mark parallelize marking and free list construction], |
| [case "$THREADS" in |
| no | none | single) |
| AC_MSG_ERROR([Parallel mark requires --enable-threads=x spec]) |
| ;; |
| esac] |
| ) |
| |
| INCLUDES=-I${srcdir}/include |
| THREADLIBS= |
| case "$THREADS" in |
| no | none | single) |
| THREADS=none |
| ;; |
| posix | pthreads) |
| THREADS=posix |
| THREADLIBS=-lpthread |
| case "$host" in |
| x86-*-linux* | ia64-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* ) |
| AC_DEFINE(GC_LINUX_THREADS) |
| AC_DEFINE(_REENTRANT) |
| if test "${enable_parallel_mark}"; then |
| AC_DEFINE(PARALLEL_MARK) |
| fi |
| AC_DEFINE(THREAD_LOCAL_ALLOC) |
| ;; |
| *-*-linux*) |
| AC_DEFINE(GC_LINUX_THREADS) |
| AC_DEFINE(_REENTRANT) |
| ;; |
| *-*-hpux*) |
| AC_MSG_WARN("Only HP/UX 11 threads are supported.") |
| AC_DEFINE(GC_HPUX_THREADS) |
| AC_DEFINE(_POSIX_C_SOURCE,199506L) |
| if test "${enable_parallel_mark}" = yes; then |
| AC_DEFINE(PARALLEL_MARK) |
| fi |
| AC_DEFINE(THREAD_LOCAL_ALLOC) |
| THREADLIBS="-lpthread -lrt" |
| ;; |
| *-*-freebsd*) |
| AC_MSG_WARN("FreeBSD does not yet fully support threads with Boehm GC.") |
| AC_DEFINE(GC_FREEBSD_THREADS) |
| INCLUDES="$INCLUDES -pthread" |
| THREADLIBS=-pthread |
| ;; |
| *-*-solaris*) |
| AC_DEFINE(GC_SOLARIS_THREADS) |
| AC_DEFINE(GC_SOLARIS_PTHREADS) |
| ;; |
| *-*-irix*) |
| AC_DEFINE(GC_IRIX_THREADS) |
| ;; |
| *-*-cygwin*) |
| THREADLIBS= |
| ;; |
| esac |
| ;; |
| win32) |
| AC_DEFINE(GC_WIN32_THREADS) |
| AC_DEFINE(NO_GETENV) |
| if test $enable_shared = yes; then |
| AC_DEFINE(GC_DLL) |
| fi |
| ;; |
| decosf1 | irix | mach | os2 | solaris | dce | vxworks) |
| AC_MSG_ERROR(thread package $THREADS not yet supported) |
| ;; |
| *) |
| AC_MSG_ERROR($THREADS is an unknown thread package) |
| ;; |
| esac |
| AC_SUBST(THREADLIBS) |
| |
| AC_CHECK_LIB(dl, dlopen, EXTRA_TEST_LIBS="$EXTRA_TEST_LIBS -ldl") |
| AC_SUBST(EXTRA_TEST_LIBS) |
| |
| target_all=libgcjgc.la |
| AC_SUBST(target_all) |
| AC_SUBST(target_alias) |
| |
| dnl If the target is an eCos system, use the appropriate eCos |
| dnl I/O routines. |
| dnl FIXME: this should not be a local option but a global target |
| dnl system; at present there is no eCos target. |
| TARGET_ECOS="no" |
| AC_ARG_WITH(ecos, |
| [ --with-ecos enable runtime eCos target support], |
| TARGET_ECOS="$with_ecos" |
| ) |
| |
| addobjs= |
| CXXINCLUDES= |
| case "$TARGET_ECOS" in |
| no) |
| ;; |
| *) |
| AC_DEFINE(ECOS) |
| CXXINCLUDES="-I${TARGET_ECOS}/include" |
| addobjs="$addobjs ecos.lo" |
| ;; |
| esac |
| AC_SUBST(CXX) |
| |
| AC_SUBST(INCLUDES) |
| AC_SUBST(CXXINCLUDES) |
| |
| machdep= |
| case "$host" in |
| alpha*-*-openbsd*) |
| machdep="alpha_mach_dep.lo" |
| if test x"${ac_cv_lib_dl_dlopen}" != xyes ; then |
| AC_MSG_WARN(OpenBSD/Alpha without dlopen(). Shared library support is disabled) |
| AM_DISABLE_SHARED |
| fi |
| ;; |
| alpha*-*-*) |
| machdep="alpha_mach_dep.lo" |
| ;; |
| i?86-*-solaris2.[[89]] | i?86-*-solaris2.1?) |
| AC_DEFINE(SOLARIS25_PROC_VDB_BUG_FIXED) |
| ;; |
| mipstx39-*-elf*) |
| machdep="mips_ultrix_mach_dep.lo" |
| AC_DEFINE(STACKBASE, __stackbase) |
| AC_DEFINE(DATASTART_IS_ETEXT) |
| ;; |
| mips-dec-ultrix*) |
| machdep="mips_ultrix_mach-dep.lo" |
| ;; |
| mips*-*-linux*) |
| ;; |
| mips-*-*) |
| machdep="mips_sgi_mach_dep.lo" |
| AC_DEFINE(NO_EXECUTE_PERMISSION) |
| ;; |
| sparc-sun-solaris2.3) |
| machdep="sparc_mach_dep.lo" |
| AC_DEFINE(SUNOS53_SHARED_LIB) |
| ;; |
| sparc-sun-solaris2.*) |
| machdep="sparc_mach_dep.lo" |
| ;; |
| ia64-*-*) |
| machdep="mach_dep.lo ia64_save_regs_in_stack.lo" |
| ;; |
| esac |
| if test x"$machdep" = x; then |
| machdep="mach_dep.lo" |
| fi |
| addobjs="$addobjs $machdep" |
| AC_SUBST(addobjs) |
| |
| dnl As of 4.13a2, the collector will not properly work on Solaris when |
| dnl built with gcc and -O. So we remove -O in the appropriate case. |
| case "$host" in |
| sparc-sun-solaris2*) |
| if test "$GCC" = yes; then |
| new_CFLAGS= |
| for i in $CFLAGS; do |
| case "$i" in |
| -O*) |
| ;; |
| *) |
| new_CFLAGS="$new_CFLAGS $i" |
| ;; |
| esac |
| done |
| CFLAGS="$new_CFLAGS" |
| fi |
| ;; |
| esac |
| |
| dnl We need to override the top-level CFLAGS. This is how we do it. |
| MY_CFLAGS="$CFLAGS" |
| AC_SUBST(MY_CFLAGS) |
| |
| dnl Include defines that have become de facto standard. |
| dnl ALL_INTERIOR_POINTERS can be overridden in startup code. |
| AC_DEFINE(SILENT) |
| AC_DEFINE(NO_SIGNALS) |
| AC_DEFINE(NO_EXECUTE_PERMISSION) |
| AC_DEFINE(ALL_INTERIOR_POINTERS) |
| |
| dnl By default, make the library as general as possible. |
| AC_DEFINE(JAVA_FINALIZATION) |
| AC_DEFINE(GC_GCJ_SUPPORT) |
| AC_DEFINE(ATOMIC_UNCOLLECTABLE) |
| |
| dnl This is something of a hack. When cross-compiling we turn off |
| dnl some functionality. These is only correct when targetting an |
| dnl embedded system. FIXME. |
| if test -n "${with_cross_host}"; then |
| AC_DEFINE(NO_SIGSET) |
| AC_DEFINE(NO_DEBUGGING) |
| fi |
| |
| AC_ARG_ENABLE(full-debug, |
| [ --enable-full-debug include full support for pointer backtracing etc.], |
| [ if test "$enable_full_debug" = "yes"; then |
| AC_MSG_WARN("Must define GC_DEBUG and use debug alloc. in clients.") |
| AC_DEFINE(KEEP_BACK_PTRS) |
| AC_DEFINE(DBG_HDRS_ALL) |
| case $host in |
| ia64-*-linux* ) |
| AC_DEFINE(MAKE_BACK_GRAPH) |
| ;; |
| x86-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* ) |
| AC_DEFINE(MAKE_BACK_GRAPH) |
| AC_MSG_WARN("Client must not use -fomit-frame-pointer.") |
| AC_DEFINE(SAVE_CALL_COUNT, 8) |
| ;; |
| esac ] |
| fi) |
| |
| if test -n "$with_cross_host" && |
| test x"$with_cross_host" != x"no"; then |
| toolexecdir='$(exec_prefix)/$(target_alias)' |
| toolexeclibdir='$(toolexecdir)/lib' |
| else |
| toolexecdir='$(libdir)/gcc-lib/$(target_alias)' |
| toolexeclibdir='$(libdir)' |
| fi |
| toolexeclibdir=$toolexeclibdir/`$CC -print-multi-os-directory` |
| AC_SUBST(toolexecdir) |
| AC_SUBST(toolexeclibdir) |
| |
| if test "${multilib}" = "yes"; then |
| multilib_arg="--enable-multilib" |
| else |
| multilib_arg= |
| fi |
| |
| AC_OUTPUT(Makefile include/Makefile, [ |
| dnl Put all the -D options in a file. |
| echo "$DEFS" > boehm-cflags |
| |
| if test -n "$CONFIG_FILES"; then |
| LD="${ORIGINAL_LD_FOR_MULTILIBS}" |
| ac_file=Makefile . ${gc_basedir}/../config-ml.in |
| fi], |
| srcdir=${srcdir} |
| host=${host} |
| target=${target} |
| with_multisubdir=${with_multisubdir} |
| ac_configure_args="${multilib_arg} ${ac_configure_args}" |
| CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} |
| gc_basedir=${gc_basedir} |
| CC="${CC}" |
| ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}" |
| DEFS="$DEFS" |
| ) |