| # GCC target-specific configuration file. |
| # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 |
| # Free Software Foundation, Inc. |
| |
| #This file is part of GCC. |
| |
| #GCC is free software; you can redistribute it and/or modify it under |
| #the terms of the GNU General Public License as published by the Free |
| #Software Foundation; either version 2, or (at your option) any later |
| #version. |
| |
| #GCC is distributed in the hope that it will be useful, but WITHOUT |
| #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| #for more details. |
| |
| #You should have received a copy of the GNU General Public License |
| #along with GCC; see the file COPYING. If not, write to the Free |
| #Software Foundation, 59 Temple Place - Suite 330, Boston, MA |
| #02111-1307, USA. |
| |
| # This is the GCC target-specific configuration file |
| # where a configuration type is mapped to different system-specific |
| # definitions and files. This is invoked by the autoconf-generated |
| # configure script. Putting it in a separate shell file lets us skip |
| # running autoconf when modifying target-specific information. |
| |
| # This file switches on the shell variable ${target}, and also uses the |
| # following shell variables: |
| # |
| # with_* Various variables as set by configure. |
| # |
| # enable_threads_flag Either the name, yes or no depending on whether |
| # threads support was requested. |
| # |
| # default_use_cxa_atexit |
| # "no" by default, can be set to "yes" if a target |
| # wishes to use __cxa_atexit() by default if the |
| # $enable___cxa_atexit variable is not set. |
| # |
| # gas_flag Either yes or no depending on whether GNU as was |
| # requested. |
| # |
| # gnu_ld_flag Either yes or no depending on whether GNU ld was |
| # requested. |
| |
| # This file sets the following shell variables for use by the |
| # autoconf-generated configure script: |
| # |
| # cpu_type The name of the cpu, if different from the first |
| # chunk of the canonical target name. |
| # |
| # tm_defines List of target macros to define for all compilations. |
| # |
| # tm_file A list of target macro files, if different from |
| # "$cpu_type/$cpu_type.h". Usually it's constructed |
| # per target in a way like this: |
| # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h" |
| # Note that the preferred order is: |
| # - specific target header "${cpu_type}/${cpu_type.h}" |
| # - generic headers like dbxelf.h elfos.h, netware.h, etc. |
| # - specializing target headers like ${cpu_type.h}/elf.h |
| # This helps to keep OS specific stuff out of the CPU |
| # defining header ${cpu_type}/${cpu_type.h}. |
| # |
| # tm_p_file Location of file with declarations for functions |
| # in $out_file. |
| # |
| # out_file The name of the machine description C support |
| # file, if different from "$cpu_type/$cpu_type.c". |
| # |
| # md_file The name of the machine-description file, if |
| # different from "$cpu_type/$cpu_type.md". |
| # |
| # tmake_file A list of machine-description-specific |
| # makefile-fragments, if different from |
| # "$cpu_type/t-$cpu_type". |
| # |
| # extra_modes The name of the file containing a list of extra |
| # machine modes, if necessary and different from |
| # "$cpu_type/$cpu_type-modes.def". |
| # |
| # extra_objs List of extra objects that should be linked into |
| # the compiler proper (cc1, cc1obj, cc1plus) |
| # depending on target. |
| # |
| # extra_gcc_objs List of extra objects that should be linked into |
| # the compiler driver (gcc) depending on target. |
| # |
| # extra_headers List of used header files from the directory |
| # config/${cpu_type}. |
| # |
| # extra_passes List of extra executables compiled for this target |
| # machine, used for compiling from source to object. |
| # |
| # extra_parts List of extra object files that should be compiled |
| # for this target machine. |
| # |
| # extra_programs Like extra_passes, but these are used when linking. |
| # |
| # c_target_objs List of extra target-dependent objects that be |
| # linked into the C compiler only. |
| # |
| # cxx_target_objs List of extra target-dependent objects that be |
| # linked into the C++ compiler only. |
| # |
| # target_gtfiles List of extra source files with type information. |
| # |
| # xm_defines List of macros to define when compiling for the |
| # target machine. |
| # |
| # xm_file List of files to include when compiling for the |
| # target machine. |
| # |
| # use_collect2 Set to yes or no, depending on whether collect2 |
| # will be used. |
| # |
| # target_cpu_default Set to override the default target model. |
| # |
| # gdb_needs_out_file_path |
| # Set to yes if gdb needs a dir command with |
| # `dirname $out_file`. |
| # |
| # thread_file Set to control which thread package to use. |
| # |
| # gas Set to yes or no depending on whether the target |
| # system normally uses GNU as. |
| # |
| # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide |
| # for this target. This is true iff |
| # MAX_LONG_TYPE_SIZE is 64. (The code which |
| # determines the underlying integral type for |
| # HOST_WIDE_INT cannot see the definition of |
| # MAX_LONG_TYPE_SIZE.) |
| # |
| # configure_default_options |
| # Set to an initializer for configure_default_options |
| # in configargs.h, based on --with-cpu et cetera. |
| # |
| # use_fixproto Set to "yes" if fixproto should be run normally, |
| # "no" if fixproto should never be run. |
| |
| # The following variables are used in each case-construct to build up the |
| # outgoing variables: |
| # |
| # gnu_ld Set to yes or no depending on whether the target |
| # system normally uses GNU ld. |
| |
| out_file= |
| tmake_file= |
| extra_headers= |
| extra_passes= |
| extra_parts= |
| extra_programs= |
| extra_objs= |
| extra_gcc_objs= |
| c_target_objs= |
| cxx_target_objs= |
| tm_defines= |
| xm_defines= |
| # Set this to force installation and use of collect2. |
| use_collect2= |
| # Set this to override the default target model. |
| target_cpu_default= |
| # Set this if gdb needs a dir command with `dirname $out_file` |
| gdb_needs_out_file_path= |
| # Set this to control which thread package will be used. |
| thread_file= |
| # Reinitialize these from the flag values every loop pass, since some |
| # configure entries modify them. |
| gas="$gas_flag" |
| gnu_ld="$gnu_ld_flag" |
| enable_threads=$enable_threads_flag |
| default_use_cxa_atexit=no |
| target_gtfiles= |
| need_64bit_hwint= |
| |
| # Default to not using fixproto. Targets which need fixproto should |
| # specifically set this to 'yes'. |
| use_fixproto=no |
| |
| # Don't carry these over build->host->target. Please. |
| xm_file= |
| md_file= |
| |
| # Obsolete configurations. |
| case ${target} in |
| d30v-* | \ |
| dsp16xx-* | \ |
| i370-* | \ |
| i960-* | \ |
| i?86-moss-msdos | i?86-*-moss* | \ |
| i?86-ncr-sysv4* | \ |
| i?86-*-netware | \ |
| i?86-*-freebsd2* | i?86-*-freebsd*aout* | \ |
| i?86-*-linux*aout* | \ |
| i?86-*-linux*libc1* | \ |
| i?86-*-interix | \ |
| i?86-*-mach* | \ |
| i?86-*-udk* | \ |
| i?86-*-sysv[123]* | \ |
| i386-*-vsta | \ |
| m68k-hp-hpux* | m68000-hp-hpux* | \ |
| m68k-*-sysv4*) |
| if test "x$enable_obsolete" != xyes; then |
| echo "*** Configuration ${target} is obsolete." >&2 |
| echo "*** Specify --enable-obsolete to build it anyway." >&2 |
| echo "*** Support will be REMOVED in the next major release of GCC," >&2 |
| echo "*** unless a maintainer comes forward." >&2 |
| exit 1 |
| fi;; |
| esac |
| |
| # Unsupported targets list. Do not put an entry in this list unless |
| # it would otherwise be caught by a more permissive pattern. The list |
| # should be in alphabetical order. |
| case ${target} in |
| alpha*-*-linux*libc1* \ |
| | i[34567]86-sequent-sysv \ |
| | i[34567]86-sequent-sysv[123]* \ |
| | i[34567]86-go32-* \ |
| | i[34567]86-*-go32* \ |
| | m68k-*-linux*aout* \ |
| | m68k-*-linux*libc1* \ |
| | mips64orion*-*-rtems* \ |
| | powerpc-*-linux*libc1* \ |
| | sparc-*-linux*aout* \ |
| | sparc-*-linux*libc1* \ |
| | sparc-hal-solaris2* \ |
| | thumb-*-* \ |
| | *-*-linux*coff* \ |
| | *-*-linux*oldld* \ |
| | *-*-rtemsaout* \ |
| | *-*-rtemscoff* \ |
| | vax-*-vms* \ |
| ) |
| echo "*** Configuration ${target} not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be |
| # updated in each machine entry. Also set default extra_headers for some |
| # machines. |
| tm_p_file= |
| cpu_type=`echo ${target} | sed 's/-.*$//'` |
| case ${target} in |
| alpha*-*-*) |
| cpu_type=alpha |
| need_64bit_hwint=yes |
| ;; |
| am33_2.0-*-linux*) |
| cpu_type=mn10300 |
| ;; |
| strongarm*-*-*) |
| cpu_type=arm |
| ;; |
| arm*-*-*) |
| cpu_type=arm |
| extra_headers="mmintrin.h" |
| ;; |
| ep9312*-*-*) |
| cpu_type=arm |
| ;; |
| xscale-*-*) |
| cpu_type=arm |
| extra_headers="mmintrin.h" |
| ;; |
| i[34567]86-*-*) |
| cpu_type=i386 |
| extra_headers="mmintrin.h xmmintrin.h emmintrin.h pmmintrin.h" |
| ;; |
| x86_64-*-*) |
| cpu_type=i386 |
| extra_headers="mmintrin.h xmmintrin.h emmintrin.h pmmintrin.h" |
| need_64bit_hwint=yes |
| ;; |
| ia64-*-*) |
| extra_headers=ia64intrin.h |
| need_64bit_hwint=yes |
| ;; |
| hppa*-*-* | parisc*-*-*) |
| cpu_type=pa |
| ;; |
| m32r*-*-*) |
| cpu_type=m32r |
| ;; |
| m680[012]0-*-*) |
| cpu_type=m68k |
| extra_headers=math-68881.h |
| ;; |
| m68k-*-*) |
| extra_headers=math-68881.h |
| ;; |
| mips*-*-*) |
| cpu_type=mips |
| need_64bit_hwint=yes |
| ;; |
| powerpc*-*-*) |
| cpu_type=rs6000 |
| extra_headers="ppc-asm.h altivec.h spe.h" |
| need_64bit_hwint=yes |
| ;; |
| rs6000*-*-*) |
| need_64bit_hwint=yes |
| ;; |
| sparc64*-*-*) |
| cpu_type=sparc |
| need_64bit_hwint=yes |
| ;; |
| sparc*-*-*) |
| cpu_type=sparc |
| ;; |
| s390*-*-*) |
| need_64bit_hwint=yes |
| ;; |
| # Note the 'l'; we need to be able to match e.g. "shle" or "shl". |
| sh[123456789l]*-*-*) |
| cpu_type=sh |
| need_64bit_hwint=yes |
| ;; |
| tic4x-*-*) |
| cpu_type=c4x |
| ;; |
| esac |
| |
| tm_file=${cpu_type}/${cpu_type}.h |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h |
| then |
| tm_p_file=${cpu_type}/${cpu_type}-protos.h |
| fi |
| extra_modes= |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def |
| then |
| extra_modes=${cpu_type}/${cpu_type}-modes.def |
| fi |
| |
| case ${target} in |
| x86_64-*-*) |
| tm_file="i386/biarch64.h ${tm_file}" |
| ;; |
| esac |
| |
| # On a.out targets, we need to use collect2. |
| case ${target} in |
| *-*-*aout*) |
| use_collect2=yes |
| ;; |
| esac |
| |
| # Common parts for widely ported systems. |
| case ${target} in |
| *-*-darwin*) |
| tm_file="${tm_file} darwin.h" |
| tm_p_file="${tm_p_file} darwin-protos.h" |
| tmake_file="t-darwin" |
| target_gtfiles="\$(srcdir)/config/darwin.c" |
| c_target_objs="darwin-c.o" |
| cxx_target_objs="darwin-c.o" |
| extra_parts="crt2.o" |
| extra_objs="darwin.o" |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| ;; |
| *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*) |
| # This is the place-holder for the generic a.out configuration |
| # of FreeBSD. No actual configuration resides here since |
| # there was only ever a bare-bones ix86 configuration for |
| # a.out and it exists solely in the machine-specific section. |
| # This place-holder must exist to avoid dropping into |
| # the generic ELF configuration of FreeBSD (i.e. it must be |
| # ordered before that section). |
| ;; |
| *-*-freebsd*) |
| # This is the generic ELF configuration of FreeBSD. Later |
| # machine-specific sections may refine and add to this |
| # configuration. |
| # |
| # Due to tm_file entry ordering issues that vary between cpu |
| # architectures, we only define fbsd_tm_file to allow the |
| # machine-specific section to dictate the final order of all |
| # entries of tm_file with the minor exception that components |
| # of the tm_file set here will always be of the form: |
| # |
| # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h |
| # |
| # The machine-specific section should not tamper with this |
| # ordering but may order all other entries of tm_file as it |
| # pleases around the provided core setting. |
| gas=yes |
| gnu_ld=yes |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" |
| case ${target} in |
| *-*-freebsd3 | *-*-freebsd[3].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=3" ;; |
| *-*-freebsd4 | *-*-freebsd[4].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=4" ;; |
| *-*-freebsd5 | *-*-freebsd[5].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=5" ;; |
| *-*-freebsd6 | *-*-freebsd[6].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=6" ;; |
| *) |
| echo 'Please update *-*-freebsd* in gcc/config.gcc' |
| exit 1 |
| ;; |
| esac |
| tmake_file="t-slibgcc-elf-ver t-freebsd" |
| case ${enable_threads} in |
| no) |
| fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h" |
| ;; |
| "" | yes | posix) |
| thread_file='posix' |
| tmake_file="${tmake_file} t-freebsd-thread" |
| # Before 5.0, FreeBSD can't bind shared libraries to -lc |
| # when "optionally" threaded via weak pthread_* checks. |
| case ${target} in |
| *-*-freebsd[34] | *-*-freebsd[34].*) |
| tmake_file="${tmake_file} t-slibgcc-nolc-override" |
| ;; |
| esac |
| ;; |
| *) |
| echo 'Unknown thread configuration for FreeBSD' |
| exit 1 |
| ;; |
| esac |
| fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h" |
| ;; |
| *-*-kfreebsd*-gnu) |
| # Must come before *-*-gnu* |
| xm_defines=POSIX # needed for cross-compiling from FreeBSD? |
| extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o" |
| # GNU tools are the only tools. |
| gas=yes |
| gnu_ld=yes |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| ;; |
| *-*-linux*libc1* | *-*-linux*aout*) |
| # Avoid the generic linux case. |
| ;; |
| *-*-linux*) |
| # Must come before *-*-gnu* (because of *-*-linux-gnu* systems). |
| extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o" |
| gas=yes |
| gnu_ld=yes |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| ;; |
| *-*-gnu*) |
| # On the Hurd, the setup is just about the same on |
| # each different CPU. The specific machines that we |
| # support are matched above and just set $cpu_type. |
| tm_file="${cpu_type}/gnu.h" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| # GNU tools are the only tools. |
| gas=yes |
| gnu_ld=yes |
| # These details are the same as for Linux. |
| # But here we need a little extra magic. |
| tmake_file="t-slibgcc-elf-ver t-linux t-gnu" |
| case ${target} in |
| alpha*) |
| tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}" |
| ;; |
| i[34567]86-*-*) |
| tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}" |
| ;; |
| esac |
| ;; |
| *-*-netbsd*) |
| tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic" |
| gas=yes |
| gnu_ld=yes |
| |
| # NetBSD 2.0 and later get POSIX threads enabled by default. |
| # Allow them to be explicitly enabled on any other version. |
| case ${enable_threads} in |
| "") |
| case ${target} in |
| *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) |
| thread_file='posix' |
| tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" |
| ;; |
| esac |
| ;; |
| yes | posix) |
| thread_file='posix' |
| tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" |
| ;; |
| esac |
| |
| # NetBSD 1.7 and later are set up to use GCC's crtstuff for |
| # ELF configurations. We will clear extra_parts in the |
| # a.out configurations. |
| case ${target} in |
| *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| ;; |
| esac |
| |
| # NetBSD 2.0 and later provide __cxa_atexit(), which we use by |
| # default (unless overridden by --disable-__cxa_atexit). |
| case ${target} in |
| *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) |
| default_use_cxa_atexit=yes |
| ;; |
| esac |
| ;; |
| *-*-openbsd*) |
| tmake_file="t-libc-ok t-openbsd t-libgcc-pic" |
| case ${enable_threads} in |
| yes) |
| thread_file='posix' |
| tmake_file="${tmake_file} t-openbsd-thread" |
| ;; |
| esac |
| ;; |
| *-*-rtems*) |
| case ${enable_threads} in |
| yes) thread_file='rtems' ;; |
| esac |
| ;; |
| *-*-vxworks*) |
| tmake_file=t-vxworks |
| tm_file="${tm_file} elfos.h svr4.h vxworks.h" |
| case ${enable_threads} in |
| no) ;; |
| "" | yes | vxworks) thread_file='vxworks' ;; |
| *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;; |
| esac |
| use_collect2=yes |
| xm_defines=POSIX |
| ;; |
| esac |
| |
| case ${target} in |
| # Support site-specific machine types. |
| *local*) |
| rest=`echo ${target} | sed -e "s/$cpu_type-//"` |
| tm_file=${cpu_type}/$rest.h |
| if test -f $srcdir/config/${cpu_type}/xm-$rest.h |
| then xm_file=${cpu_type}/xm-$rest.h |
| fi |
| if test -f $srcdir/config/${cpu_type}/t-$rest |
| then tmake_file=${cpu_type}/t-$rest |
| fi |
| ;; |
| alpha*-*-unicosmk*) |
| use_collect2=yes |
| tm_file="${tm_file} alpha/unicosmk.h" |
| |
| # Don't include t-ieee for now because we don't support that yet |
| # tmake_file="alpha/t-ieee" |
| tmake_file="alpha/t-unicosmk" |
| use_fixproto=yes |
| ;; |
| alpha*-*-linux*) |
| tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="t-slibgcc-elf-ver t-linux alpha/t-crtfm alpha/t-alpha alpha/t-ieee" |
| ;; |
| alpha*-*-gnu*) |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" |
| ;; |
| alpha*-*-freebsd*) |
| tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| ;; |
| alpha*-*-netbsd*) |
| tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee" |
| ;; |
| alpha*-*-openbsd*) |
| tm_defines="OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT" |
| tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h" |
| # default x-alpha is only appropriate for dec-osf. |
| target_cpu_default="MASK_GAS" |
| tmake_file="alpha/t-alpha alpha/t-ieee" |
| ;; |
| alpha*-dec-osf[45]*) |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| if test x$gas != xyes |
| then |
| extra_passes="mips-tfile mips-tdump" |
| fi |
| use_collect2=yes |
| tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4" |
| tm_file="${tm_file} alpha/osf.h" |
| extra_headers=va_list.h |
| case ${target} in |
| *-*-osf4*) |
| # Set target_cpu_default except on 4.0a. |
| case ${target} in |
| *-*-osf4.0a) ;; |
| *) target_cpu_default=MASK_SUPPORT_ARCH |
| esac |
| ;; |
| *-*-osf5*) |
| tm_file="${tm_file} alpha/osf5.h" |
| target_cpu_default=MASK_SUPPORT_ARCH |
| ;; |
| esac |
| case ${enable_threads} in |
| "" | yes | posix) |
| thread_file='posix' |
| tmake_file="${tmake_file} alpha/t-osf-pthread" |
| ;; |
| esac |
| ;; |
| alpha64-dec-*vms*) |
| tm_file="${tm_file} alpha/vms.h alpha/vms64.h" |
| xm_file="alpha/xm-vms.h" |
| tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee" |
| prefix=/gnu |
| local_prefix=/gnu |
| ;; |
| alpha*-dec-*vms*) |
| tm_file="${tm_file} alpha/vms.h" |
| xm_file=alpha/xm-vms.h |
| tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee" |
| prefix=/gnu |
| local_prefix=/gnu |
| ;; |
| arc-*-elf*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| extra_parts="crtinit.o crtfini.o" |
| use_fixproto=yes |
| ;; |
| arm-*-coff* | armel-*-coff*) |
| tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h" |
| tmake_file=arm/t-arm-coff |
| ;; |
| arm-semi-aof | armel-semi-aof) |
| tm_file="arm/semiaof.h arm/aof.h arm/arm.h" |
| tmake_file=arm/t-semi |
| ;; |
| arm-wrs-vxworks) |
| tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h" |
| tmake_file="${tmake_file} arm/t-vxworks" |
| ;; |
| arm*-*-freebsd*|strongarm*-*-freebsd*) |
| tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h" |
| tmake_file="${tmake_file} arm/t-strongarm-elf" |
| ;; |
| arm*-*-netbsdelf*) |
| tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h" |
| tmake_file="${tmake_file} arm/t-netbsd" |
| ;; |
| arm*-*-netbsd*) |
| tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h" |
| tmake_file="t-netbsd arm/t-netbsd" |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| arm*-*-linux*) # ARM GNU/Linux with ELF |
| tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h" |
| tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| gnu_ld=yes |
| ;; |
| arm*-*-uclinux*) # ARM ucLinux |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h" |
| tmake_file=arm/t-arm-elf |
| ;; |
| arm*-*-ecos-elf) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h" |
| tmake_file=arm/t-arm-elf |
| ;; |
| arm*-*-rtems*) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h" |
| tmake_file="arm/t-arm-elf t-rtems" |
| ;; |
| arm*-*-elf | ep9312-*-elf) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file=arm/t-arm-elf |
| ;; |
| arm*-wince-pe*) |
| tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h" |
| tmake_file=arm/t-wince-pe |
| extra_objs="pe.o" |
| ;; |
| arm-*-pe*) |
| tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h" |
| tmake_file=arm/t-pe |
| extra_objs="pe.o" |
| ;; |
| arm*-*-kaos*) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h" |
| tmake_file=arm/t-arm-elf |
| ;; |
| avr-*-*) |
| tm_file="avr/avr.h dbxelf.h" |
| use_fixproto=yes |
| ;; |
| c4x-*-rtems* | tic4x-*-rtems*) |
| tmake_file="c4x/t-c4x t-rtems" |
| tm_file="c4x/c4x.h c4x/rtems.h rtems.h" |
| c_target_objs="c4x-c.o" |
| cxx_target_objs="c4x-c.o" |
| ;; |
| c4x-* | tic4x-*) |
| tmake_file=c4x/t-c4x |
| c_target_objs="c4x-c.o" |
| cxx_target_objs="c4x-c.o" |
| ;; |
| cris-*-aout) |
| tm_file="dbxelf.h ${tm_file} cris/aout.h" |
| gas=yes |
| tmake_file="cris/t-cris cris/t-aout" |
| ;; |
| cris-*-elf | cris-*-none) |
| tm_file="dbxelf.h elfos.h ${tm_file}" |
| tmake_file="cris/t-cris cris/t-elfmulti" |
| gas=yes |
| ;; |
| cris-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h" |
| tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux" |
| ;; |
| d30v-*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| ;; |
| dsp16xx-*) |
| use_fixproto=yes |
| ;; |
| fr30-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| tmake_file=fr30/t-fr30 |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| frv-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h" |
| tmake_file=frv/t-frv |
| use_fixproto=yes |
| ;; |
| h8300-*-rtems*) |
| tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems" |
| tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h" |
| ;; |
| h8300-*-elf*) |
| tmake_file="h8300/t-h8300 h8300/t-elf" |
| tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h" |
| use_fixproto=yes |
| ;; |
| h8300-*-*) |
| tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h" |
| use_fixproto=yes |
| ;; |
| hppa*64*-*-linux* | parisc*64*-*-linux*) |
| target_cpu_default="(MASK_PA_11 | MASK_PA_20)" |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \ |
| pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux64" |
| gas=yes gnu_ld=yes |
| need_64bit_hwint=yes |
| ;; |
| hppa*-*-linux* | parisc*-*-linux*) |
| target_cpu_default="MASK_PA_11 | MASK_NO_SPACE_REGS" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \ |
| pa/pa32-regs.h pa/pa32-linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux" |
| # if not configured with --enable-sjlj-exceptions, bump the |
| # libgcc version number |
| if test x$sjlj != x1; then |
| tmake_file="$tmake_file pa/t-slibgcc-elf-ver" |
| fi |
| ;; |
| # port not yet contributed. |
| #hppa*-*-openbsd*) |
| # target_cpu_default="MASK_PA_11" |
| # ;; |
| hppa1.1-*-pro*) |
| target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h" |
| tmake_file="pa/t-pro" |
| ;; |
| hppa1.1-*-osf*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h" |
| tmake_file="pa/t-pa" |
| use_collect2=yes |
| ;; |
| hppa1.1-*-rtems*) |
| target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h" |
| tmake_file="pa/t-pro t-rtems" |
| ;; |
| hppa1.1-*-bsd*) |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h" |
| target_cpu_default="MASK_PA_11" |
| tmake_file="pa/t-pa" |
| use_collect2=yes |
| ;; |
| hppa1.1-*-hpux10* | hppa2*-*-hpux10*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h" |
| tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib" |
| if test x$enable_threads = x; then |
| enable_threads=$have_pthread_h |
| fi |
| case x${enable_threads} in |
| xyes | xdce) |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| ;; |
| esac |
| use_collect2=yes |
| use_fixproto=yes |
| ;; |
| hppa1.0-*-hpux10*) |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h" |
| tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib" |
| if test x$enable_threads = x; then |
| enable_threads=$have_pthread_h |
| fi |
| case x${enable_threads} in |
| xyes | xdce) |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| ;; |
| esac |
| use_collect2=yes |
| use_fixproto=yes |
| ;; |
| hppa*64*-*-hpux11*) |
| if test x$gas = xyes |
| then |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \ |
| pa/pa64-regs.h pa/pa-hpux.h \ |
| pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h" |
| else |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \ |
| pa/pa64-regs.h pa/pa-hpux.h \ |
| pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h" |
| fi |
| need_64bit_hwint=yes |
| tmake_file="pa/t-pa64 pa/t-pa-hpux" |
| target_cpu_default="(MASK_PA_11|MASK_PA_20|MASK_GAS)" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| case x${enable_threads} in |
| xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| ;; |
| hppa1.1-*-hpux11* | hppa2*-*-hpux11*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h" |
| tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib" |
| case x${enable_threads} in |
| xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=yes |
| ;; |
| hppa1.0-*-hpux11*) |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h" |
| tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib" |
| case x${enable_threads} in |
| xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=yes |
| ;; |
| i370-*-opened*) # IBM 360/370/390 Architecture |
| xm_defines='FATAL_EXIT_CODE=12' |
| tm_file="i370/oe.h i370/i370.h" |
| tmake_file="i370/t-i370" |
| c_target_objs="i370-c.o" |
| cxx_target_objs="i370-c.o" |
| # Don't bother fixing up header files; they're weird. |
| ;; |
| i370-*-mvs*) |
| xm_defines='FATAL_EXIT_CODE=12' |
| tm_file="i370/mvs.h i370/i370.h" |
| tmake_file="i370/t-i370" |
| c_target_objs="i370-c.o" |
| cxx_target_objs="i370-c.o" |
| use_fixproto=yes |
| ;; |
| i370-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h linux.h i370/linux.h i370/i370.h" |
| tmake_file="t-slibgcc-elf-ver t-linux" |
| # broken_install=yes |
| ;; |
| i[34567]86-*-darwin*) |
| tm_file="${tm_file} i386/darwin.h" |
| ;; |
| i[34567]86-*-elf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h" |
| tmake_file="i386/t-i386elf t-svr4" |
| use_fixproto=yes |
| ;; |
| i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4 |
| xm_defines="SMALL_ARG_MAX" |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h" |
| extra_parts="crtbegin.o crtend.o" |
| tmake_file=i386/t-crtpic |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-netware) # Intel 80386's running netware |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h netware.h i386/netware.h" |
| ;; |
| i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*) |
| if test x$gas = xyes |
| then |
| tm_file="${tm_file} usegas.h" |
| fi |
| xm_defines="SMALL_ARG_MAX" |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h" |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-aout*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-beoself* | i[34567]86-*-beos*) |
| tmake_file='i386/t-beos i386/t-crtpic' |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h" |
| extra_parts='crtbegin.o crtend.o' |
| ;; |
| i[34567]86-*-freebsd2 | i[34567]86-*-freebsd2.* | i[34567]86-*-freebsd*aout*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/freebsd-aout.h" |
| tmake_file=t-freebsd |
| ;; |
| i[34567]86-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h" |
| ;; |
| x86_64-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h" |
| ;; |
| i[34567]86-*-netbsdelf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h" |
| ;; |
| i[34567]86-*-netbsd*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h" |
| tmake_file=t-netbsd |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| x86_64-*-netbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h" |
| ;; |
| i[34567]86-*-openbsd*) |
| tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h" |
| # needed to unconfuse gdb |
| tmake_file="t-libc-ok t-openbsd i386/t-openbsd" |
| # we need collect2 until our bug is fixed... |
| use_collect2=yes |
| ;; |
| i[34567]86-*-coff*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-linux*aout*) # Intel 80386's running GNU/Linux |
| # with a.out format |
| tmake_file="i386/t-crtstuff" |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h linux-aout.h i386/linux-aout.h" |
| gnu_ld=yes |
| ;; |
| i[34567]86-*-linux*libc1) # Intel 80386's running GNU/Linux |
| # with ELF format using the |
| # GNU/Linux C library 5 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| gnu_ld=yes |
| if test x$enable_threads = xyes; then |
| thread_file='single' |
| fi |
| ;; |
| i[34567]86-*-linux*) # Intel 80386's running GNU/Linux |
| # with ELF format using glibc 2 |
| # aka GNU/Linux C library 6 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff" |
| ;; |
| x86_64-*-linux*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \ |
| i386/x86-64.h i386/linux64.h" |
| tmake_file="t-slibgcc-elf-ver t-linux i386/t-linux64" |
| ;; |
| i[34567]86-*-kfreebsd*-gnu) # must be before i[34567]86-*-gnu* |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h kfreebsdgnu.h i386/kfreebsdgnu.h" |
| tmake_file="t-slibgcc-elf-ver t-kfreebsd-gnu i386/t-crtstuff" |
| float_format=i386 |
| use_fixproto=no |
| ;; |
| i[34567]86-*-gnu*) |
| ;; |
| i[34567]86-pc-msdosdjgpp*) |
| xm_file=i386/xm-djgpp.h |
| tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h" |
| tmake_file=i386/t-djgpp |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[34567]86-moss-msdos* | i[34567]86-*-moss*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h i386/moss.h" |
| tmake_file=t-libc-ok |
| gnu_ld=yes |
| gas=yes |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-lynxos*) |
| if test x$gas = xyes |
| then |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h svr3.h lynx.h i386/lynx.h" |
| else |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx-ng.h i386/lynx-ng.h" |
| fi |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-mach*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/mach.h" |
| # tmake_file=t-libc-ok |
| use_collect2=yes |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-nto-qnx*) |
| tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h" |
| tmake_file=i386/t-nto |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[34567]86-*-rtems*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h" |
| extra_parts="crtbegin.o crtend.o crti.o crtn.o" |
| tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems" |
| ;; |
| i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h" |
| if test x$gas = xyes |
| then |
| tm_file="usegas.h ${tm_file}" |
| fi |
| tmake_file=i386/t-sco5 |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-solaris2*) |
| xm_defines="SMALL_ARG_MAX" |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h i386/sol2.h" |
| tmake_file="i386/t-sol2 t-svr4" |
| if test x$gnu_ld = xyes; then |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| case ${target} in |
| *-*-solaris2.[789] | *-*-solaris2.1[0-9]) |
| tm_file="$tm_file tm-dwarf2.h" |
| ;; |
| esac |
| extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o" |
| if test x${enable_threads} = x; then |
| enable_threads=$have_pthread_h |
| if test x${enable_threads} = x; then |
| enable_threads=$have_thread_h |
| fi |
| fi |
| if test x${enable_threads} = xyes; then |
| if test x${have_pthread_h} = xyes; then |
| thread_file='posix' |
| else |
| thread_file='solaris' |
| fi |
| fi |
| ;; |
| i[34567]86-*-sysv5*) # Intel x86 on System V Release 5 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| tmake_file="i386/t-crtpic t-svr4" |
| extra_parts="crtbegin.o crtend.o" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-sysv4*) # Intel 80386's running system V.4 |
| xm_defines="SMALL_ARG_MAX" |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| tmake_file="i386/t-crtpic t-svr4" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-udk*) # Intel x86 on SCO UW/OSR5 Dev Kit |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h i386/udk.h" |
| tmake_file="i386/t-crtpic i386/t-udk t-svr4" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-sysv*) # Intel 80386's running system V |
| if test x$gas = xyes |
| then |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h i386/svr3dbx.h" |
| tmake_file=i386/t-svr3dbx |
| extra_parts="svr3.ifile svr3z.ifile" |
| else |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h" |
| extra_parts="crtbegin.o crtend.o" |
| tmake_file=i386/t-crtstuff |
| fi |
| else |
| tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h" |
| extra_parts="crtbegin.o crtend.o" |
| tmake_file=i386/t-crtstuff |
| fi |
| tmake_file="$tmake_file i386/t-crtpic" |
| use_fixproto=yes |
| ;; |
| i386-*-vsta) # Intel 80386's running VSTa kernel |
| xm_file="i386/xm-vsta.h" |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/vsta.h" |
| use_fixproto=yes |
| ;; |
| i[4567]86-wrs-vxworks) |
| tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/vxworks.h" |
| tmake_file="${tmake_file} i386/t-vxworks" |
| ;; |
| i[34567]86-*-pe | i[34567]86-*-cygwin*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h" |
| xm_file=i386/xm-cygwin.h |
| tmake_file="i386/t-cygwin i386/t-cygming" |
| extra_objs=winnt.o |
| c_target_objs=cygwin2.o |
| cxx_target_objs=cygwin2.o |
| extra_gcc_objs=cygwin1.o |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| i[34567]86-*-mingw32*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h" |
| xm_file=i386/xm-mingw32.h |
| tmake_file="i386/t-cygming i386/t-mingw32" |
| extra_objs=winnt.o |
| if test x$enable_threads = xyes; then |
| thread_file='win32' |
| fi |
| case ${target} in |
| *mingw32crt*) |
| tm_file="${tm_file} i386/crtdll.h" |
| ;; |
| *mingw32msv* | *mingw32*) |
| ;; |
| esac |
| ;; |
| i[34567]86-*-uwin*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h" |
| tmake_file="i386/t-cygwin i386/t-uwin" |
| extra_objs=winnt.o |
| if test x$enable_threads = xyes; then |
| thread_file='win32' |
| fi |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-interix3*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h" |
| tmake_file="i386/t-interix" |
| extra_objs=winnt.o |
| if test x$enable_threads = xyes ; then |
| thread_file='posix' |
| fi |
| if test x$stabs = xyes ; then |
| tm_file="${tm_file} dbxcoff.h" |
| fi |
| ;; |
| i[34567]86-*-interix*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h interix.h" |
| tmake_file="i386/t-interix" |
| extra_objs=winnt.o |
| if test x$enable_threads = xyes ; then |
| thread_file='posix' |
| fi |
| if test x$stabs = xyes ; then |
| tm_file="${tm_file} dbxcoff.h" |
| fi |
| ;; |
| i[34567]86-*-kaos*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h" |
| tmake_file="i386/t-i386elf t-svr4" |
| ;; |
| i860-*-sysv4*) |
| tm_file="${tm_file} elfos.h svr4.h i860/sysv4.h" |
| tmake_file="i860/t-i860 i860/t-svr4" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| i960-*-coff*) |
| tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h" |
| tmake_file=i960/t-960bare |
| c_target_objs="i960-c.o" |
| cxx_target_objs="i960-c.o" |
| ;; |
| i960-*-rtems) |
| tmake_file="i960/t-960bare t-rtems" |
| tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/rtems.h rtems.h" |
| c_target_objs="i960-c.o" |
| cxx_target_objs="i960-c.o" |
| ;; |
| i960-*-*) # Default i960 environment. |
| use_collect2=yes |
| tmake_file=i960/t-960bare |
| c_target_objs="i960-c.o" |
| cxx_target_objs="i960-c.o" |
| use_fixproto=yes |
| ;; |
| ia64*-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h" |
| tmake_file="ia64/t-ia64" |
| target_cpu_default="0" |
| if test x$gas = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_AS" |
| fi |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" |
| use_fixproto=yes |
| ;; |
| ia64*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h" |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| tmake_file="${tmake_file} ia64/t-ia64" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" |
| ;; |
| ia64*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux ia64/t-ia64 t-libunwind ia64/t-glibc" |
| if test x$with_system_libunwind != xyes ; then |
| tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind" |
| fi |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" |
| ;; |
| ia64*-*-hpux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h" |
| tmake_file="ia64/t-ia64 ia64/t-hpux" |
| target_cpu_default="MASK_GNU_AS" |
| case x$enable_threads in |
| xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=no |
| c_target_objs="ia64-c.o" |
| cxx_target_objs="ia64-c.o" |
| # If we decide to run fixproto we should define FIXPROTO_DEFINES |
| # in ia64/t-hpux, and also fix the definition of putenv in |
| # sys-protos.h (const char not char). |
| ;; |
| ip2k-*-elf) |
| tm_file="elfos.h ${tm_file}" |
| use_fixproto=yes |
| ;; |
| iq2000*-*-elf*) |
| tm_file="svr4.h elfos.h iq2000/iq2000.h" |
| tmake_file=iq2000/t-iq2000 |
| out_file=iq2000/iq2000.c |
| md_file=iq2000/iq2000.md |
| use_fixproto=yes |
| ;; |
| m32r-*-elf*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| extra_parts="crtinit.o crtfini.o" |
| use_fixproto=yes |
| ;; |
| m32rle-*-elf*) |
| tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}" |
| extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o" |
| use_fixproto=yes |
| ;; |
| m32r-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| tmake_file="m32r/t-linux" |
| gnu_ld=yes |
| use_fixproto=yes |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| m32rle-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| tmake_file="m32r/t-linux" |
| gnu_ld=yes |
| use_fixproto=yes |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| # m68hc11 and m68hc12 share the same machine description. |
| m68hc11-*-*|m6811-*-*) |
| tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h" |
| tm_p_file="m68hc11/m68hc11-protos.h" |
| md_file="m68hc11/m68hc11.md" |
| out_file="m68hc11/m68hc11.c" |
| tmake_file="m68hc11/t-m68hc11-gas" |
| use_fixproto=yes |
| ;; |
| m68hc12-*-*|m6812-*-*) |
| tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h" |
| tm_p_file="m68hc11/m68hc11-protos.h" |
| md_file="m68hc11/m68hc11.md" |
| out_file="m68hc11/m68hc11.c" |
| tmake_file="m68hc11/t-m68hc11-gas" |
| use_fixproto=yes |
| ;; |
| m68000-hp-hpux*) # HP 9000 series 300 |
| tm_file="m68k/hp320base.h m68k/m68k.h m68k/hp320.h m68k/hp310.h" |
| tm_defines="TARGET_DEFAULT=0" # 68000, no 68881, no bitfield ops |
| if test x$gas = xyes |
| then |
| tm_defines="${tm_defines} DBX_DEBUGGING_INFO=1 USE_GAS" |
| fi |
| tmake_file=m68k/t-hp320 |
| use_collect2=yes |
| use_fixproto=yes |
| ;; |
| m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7. |
| tm_file="m68k/hp320base.h m68k/m68k.h m68k/hp320.h" |
| if test x$gas = xyes |
| then |
| tm_defines="DBX_DEBUGGING_INFO=1 USE_GAS" |
| else |
| tm_defines="NO_DOT_IN_LABEL NO_BUGS" |
| fi |
| use_collect2=yes |
| use_fixproto=yes |
| ;; |
| m68k-hp-hpux*) # HP 9000 series 300 |
| tm_file="m68k/hp320base.h m68k/m68k.h m68k/hp320.h" |
| if test x$gas = xyes |
| then |
| tm_defines="DBX_DEBUGGING_INFO=1 USE_GAS" |
| fi |
| use_collect2=yes |
| use_fixproto=yes |
| ;; |
| m68k-*-aout*) |
| tmake_file=m68k/t-m68kbare |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h" |
| ;; |
| m68k-*-coff*) |
| tmake_file=m68k/t-m68kbare |
| tm_defines="MOTOROLA USE_GAS" |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h" |
| use_fixproto=yes |
| ;; |
| m68020-*-elf* | m68k-*-elf*) |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h" |
| tm_defines="MOTOROLA USE_GAS" |
| tmake_file=m68k/t-m68kelf |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| m68010-*-netbsdelf* | m68k*-*-netbsdelf*) |
| tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h" |
| tm_defines="MOTOROLA USE_GAS" |
| case ${target} in |
| m68010*) |
| target_cpu_default="0" |
| ;; |
| *) |
| target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD" |
| ;; |
| esac |
| ;; |
| m68k*-*-netbsd*) |
| if test "x$enable_obsolete" != xyes; then |
| echo "*** Configuration ${target} is obsolete." >&2 |
| echo "*** Specify --enable-obsolete to build it anyway." >&2 |
| echo "*** Support will be REMOVED in the next major release of GCC," >&2 |
| echo "*** unless a maintainer comes forward." >&2 |
| exit 1 |
| fi |
| tm_file="m68k/m68k.h netbsd.h netbsd-aout.h m68k/netbsd.h" |
| tmake_file=t-netbsd |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| m68k*-*-openbsd*) |
| # needed to unconfuse gdb |
| tm_defines="OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)" |
| tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h" |
| tmake_file="t-libc-ok t-openbsd m68k/t-openbsd" |
| # we need collect2 until our bug is fixed... |
| use_collect2=yes |
| ;; |
| m68k-*-sysv4*) # Motorola m68k's running system V.4 |
| tm_file="m68k/m68k.h m68k/sgs.h dbxelf.h elfos.h svr4.h m68k/m68kv4.h" |
| tm_defines="MOTOROLA SGS SGS_CMP_ORDER SGS_SWITCH_TABLES" |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux with uClibc |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h" |
| tm_defines="MOTOROLA USE_GAS" |
| tmake_file=m68k/t-uclinux |
| use_fixproto=no |
| ;; |
| m68k-*-linux*) # Motorola m68k's running GNU/Linux |
| # with ELF format using glibc 2 |
| # aka the GNU/Linux C library 6. |
| tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h" |
| tm_defines="MOTOROLA USE_GAS" |
| tmake_file="t-slibgcc-elf-ver t-linux" |
| # if not configured with --enable-sjlj-exceptions, bump the |
| # libgcc version number |
| if test x$sjlj != x1; then |
| tmake_file="$tmake_file m68k/t-slibgcc-elf-ver" |
| fi |
| ;; |
| m68k-*-rtems*) |
| tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems" |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h" |
| tm_defines="MOTOROLA USE_GAS" |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| mcore-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h" |
| tmake_file=mcore/t-mcore |
| use_fixproto=yes |
| ;; |
| mcore-*-pe*) |
| tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h" |
| tmake_file=mcore/t-mcore-pe |
| use_fixproto=yes |
| ;; |
| mips-sgi-irix6*) # SGI System V.4., IRIX 6 |
| tm_file="${tm_file} mips/iris5.h mips/iris6.h" |
| tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6" |
| if test x$gas = xyes |
| then |
| tm_file="${tm_file} mips/iris6gas.h" |
| fi |
| if test "x$gnu_ld" = xyes |
| then |
| tm_file="${tm_file} mips/iris6gld.h" |
| tmake_file="$tmake_file mips/t-irix-gld" |
| fi |
| target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT" |
| tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32" |
| # See comment in mips/iris5.h file. Only enabled for O32 ABI |
| # without GNU as. |
| if test x$gas = xno |
| then |
| use_collect2=yes |
| fi |
| # if test x$enable_threads = xyes; then |
| # thread_file='irix' |
| # fi |
| use_fixproto=yes |
| ;; |
| mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64 |
| tm_file="${tm_file} mips/iris5.h mips/iris6.h mips/cross64.h" |
| tmake_file="mips/t-iris mips/t-cross64" |
| target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT" |
| tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32" |
| # See comment in mips/iris[56].h files. |
| use_collect2=yes |
| # if test x$enable_threads = xyes; then |
| # thread_file='irix' |
| # fi |
| use_fixproto=yes |
| ;; |
| mips-sgi-irix5*) # SGI System V.4., IRIX 5 |
| tm_file="${tm_file} mips/iris5.h" |
| if test x$gas = xyes |
| then |
| tm_file="${tm_file} mips/sdb.h mips/iris5gas.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h mips/dbxmdebug.h" |
| fi |
| tmake_file=mips/t-iris5-gas |
| else |
| tmake_file=mips/t-iris5-as |
| fi |
| if test "x$gnu_ld" = xyes |
| then |
| tm_file="${tm_file} mips/iris5gld.h" |
| tmake_file="$tmake_file mips/t-irix-gld" |
| fi |
| tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6" |
| target_cpu_default="MASK_ABICALLS" |
| # mips-tfile doesn't work yet |
| # See comment in mips/iris5.h file. |
| if test x$gas = xno |
| then |
| use_collect2=yes |
| fi |
| # if test x$enable_threads = xyes; then |
| # thread_file='irix' |
| # fi |
| use_fixproto=yes |
| ;; |
| mips*-*-netbsd*) # NetBSD/mips, either endian. |
| target_cpu_default="MASK_GAS|MASK_ABICALLS" |
| tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h" |
| ;; |
| mips64*-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h" |
| tmake_file="t-slibgcc-elf-ver t-linux mips/t-linux64" |
| |
| # This default ABI is a partial lie: t-linux64 overrides the |
| # DRIVER_SELF_SPEC that sets the default abi, in the spec file |
| # that is installed. What GCC thinks of as the default must |
| # remain as ABI_32 such that the SONAMEs of the libgcc shared |
| # libraries remain compatible with those of mips-linux-gnu. |
| tm_defines="MIPS_ISA_DEFAULT=1 MIPS_ABI_DEFAULT=ABI_32" |
| target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT" |
| extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o" |
| gnu_ld=yes |
| gas=yes |
| ;; |
| mips*-*-linux*) # Linux MIPS, either endian. |
| tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h" |
| case ${target} in |
| mipsisa32*-*) |
| target_cpu_default="MASK_SOFT_FLOAT" |
| tm_defines="MIPS_ISA_DEFAULT=32" |
| ;; |
| esac |
| tmake_file="t-slibgcc-elf-ver t-linux" |
| ;; |
| mips*-*-openbsd*) |
| tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS" |
| target_cpu_default="MASK_GAS|MASK_ABICALLS" |
| tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h" |
| case ${target} in |
| mips*el-*-openbsd*) |
| tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";; |
| *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";; |
| esac |
| ;; |
| mipsisa32-*-elf* | mipsisa32el-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-isa3264 |
| tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI" |
| use_fixproto=yes |
| ;; |
| mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-isa3264 |
| tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI" |
| use_fixproto=yes |
| ;; |
| mipsisa64-*-elf* | mipsisa64el-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-isa3264 |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI" |
| use_fixproto=yes |
| ;; |
| mipsisa64sr71k-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-sr71k |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI" |
| use_fixproto=yes |
| ;; |
| mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-elf |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64" |
| use_fixproto=yes |
| ;; |
| mips-*-elf* | mipsel-*-elf*) |
| tm_file="${tm_file} mips/elf.h" |
| tmake_file=mips/t-elf |
| use_fixproto=yes |
| ;; |
| mips64-*-elf* | mips64el-*-elf*) |
| tm_file="${tm_file} mips/elf64.h" |
| tmake_file=mips/t-elf |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" |
| use_fixproto=yes |
| ;; |
| mips64vr-*-elf* | mips64vrel-*-elf*) |
| tm_file="mips/vr.h ${tm_file} mips/elf64.h" |
| tm_defines="MIPS_ABI_DEFAULT=ABI_O64 MIPS_MARCH_CONTROLS_SOFT_FLOAT=1" |
| tmake_file=mips/t-vr |
| use_fixproto=yes |
| ;; |
| mips64orion-*-elf* | mips64orionel-*-elf*) |
| tm_file="${tm_file} mips/elforion.h mips/elf64.h" |
| tmake_file=mips/t-elf |
| tmake_file=mips/t-elf |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS" |
| tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" |
| use_fixproto=yes |
| ;; |
| mips*-*-rtems*) |
| tm_file="${tm_file} mips/elf.h mips/rtems.h rtems.h" |
| tmake_file="mips/t-elf t-rtems mips/t-rtems" |
| ;; |
| mips-wrs-vxworks) |
| # We want vxworks.h after mips/elf.h, which unfortunately means we |
| # have to redo the tm_file list from scratch. |
| tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h" |
| tmake_file="${tmake_file} mips/t-vxworks" |
| target_cpu_default="MASK_GAS" |
| ;; |
| mips-wrs-windiss) # Instruction-level simulator for VxWorks. |
| xm_defines=POSIX |
| tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h" |
| tmake_file="${tmake_file} mips/t-elf" |
| target_cpu_default="MASK_GAS" |
| thread_file= |
| ;; |
| mipstx39-*-elf* | mipstx39el-*-elf*) |
| tm_file="${tm_file} mips/r3900.h mips/elf.h" |
| tmake_file=mips/t-r3900 |
| use_fixproto=yes |
| ;; |
| mmix-knuth-mmixware) |
| need_64bit_hwint=yes |
| ;; |
| mn10300-*-*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| use_fixproto=yes |
| ;; |
| ns32k-*-netbsdelf*) |
| echo "GCC does not yet support the ${target} target"; exit 1 |
| ;; |
| ns32k-*-netbsd*) |
| tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h" |
| # On NetBSD, the headers are already okay, except for math.h. |
| tmake_file="t-netbsd ns32k/t-ns32k" |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| pdp11-*-bsd) |
| tm_file="${tm_file} pdp11/2bsd.h" |
| use_fixproto=yes |
| ;; |
| pdp11-*-*) |
| use_fixproto=yes |
| ;; |
| avr-*-*) |
| use_fixproto=yes |
| ;; |
| # port not yet contributed |
| #powerpc-*-openbsd*) |
| # tmake_file="${tmake_file} rs6000/t-fprules " |
| # extra_headers= |
| # ;; |
| powerpc64-*-linux*) |
| tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" |
| case x$with_cpu in |
| x|xpowerpc64|xdefault64) tm_file="${tm_file} rs6000/default64.h";; |
| esac |
| tm_file="${tm_file} rs6000/linux64.h" |
| tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-linux rs6000/t-ppccomm rs6000/t-linux64" |
| ;; |
| powerpc64-*-gnu*) |
| tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h" |
| tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64" |
| ;; |
| powerpc-*-beos*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h" |
| tmake_file="rs6000/t-fprules rs6000/t-beos" |
| extra_headers= |
| use_fixproto=yes |
| ;; |
| powerpc-*-darwin*) |
| tm_file="${tm_file} rs6000/darwin.h" |
| tmake_file="t-darwin t-slibgcc-darwin rs6000/t-darwin" |
| extra_headers=altivec.h |
| ;; |
| powerpc*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" |
| ;; |
| powerpc-*-netbsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h" |
| tmake_file="${tmake_file} rs6000/t-netbsd" |
| ;; |
| powerpc-*-chorusos*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm" |
| case ${enable_threads} in |
| yes | posix) |
| thread_file='posix' |
| ;; |
| esac |
| use_fixproto=yes |
| ;; |
| powerpc-*-eabispe*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h" |
| tmake_file="rs6000/t-spe rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabisimaltivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabisim*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| use_fixproto=yes |
| ;; |
| powerpc-*-eabialtivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabi*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h" |
| tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm" |
| ;; |
| powerpc-*-linux*altivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm" |
| ;; |
| powerpc-*-linux*spe*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm" |
| ;; |
| powerpc-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm" |
| ;; |
| powerpc-*-gnu-gnualtivec*) |
| tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| powerpc-*-gnu*) |
| tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| powerpc-wrs-vxworks*) |
| # We want vxworks.h after rs6000/sysv4.h, which unfortunately |
| # means we have to redo the tm_file list from scratch. |
| tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" |
| tm_file="${tm_file} vxworks.h rs6000/vxworks.h" |
| tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks" |
| extra_headers=ppc-asm.h |
| ;; |
| powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks. |
| tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| thread_file="" |
| use_fixproto=yes |
| ;; |
| powerpcle-*-sysv*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm" |
| use_fixproto=yes |
| ;; |
| powerpcle-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| use_fixproto=yes |
| ;; |
| powerpcle-*-eabisim*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpcle-*-eabi*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-kaos*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpcle-*-kaos*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h" |
| tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h" |
| tmake_file="rs6000/t-fprules rs6000/t-newas" |
| use_collect2=yes |
| extra_headers= |
| use_fixproto=yes |
| ;; |
| rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*) |
| tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-aix43 |
| use_collect2=yes |
| thread_file='aix' |
| extra_headers= |
| ;; |
| rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*) |
| tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-aix43 |
| use_collect2=yes |
| thread_file='aix' |
| extra_headers= |
| ;; |
| rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-aix52 |
| use_collect2=yes |
| thread_file='aix' |
| extra_headers= |
| ;; |
| rs6000-*-lynxos*) |
| tm_file="svr3.h lynx.h rs6000/lynxbase.h rs6000/rs6000.h rs6000/lynx.h" |
| tmake_file=rs6000/t-fprules |
| use_collect2=yes |
| use_fixproto=yes |
| ;; |
| s390-*-linux*) |
| tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff" |
| ;; |
| s390x-*-linux*) |
| tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" |
| tm_p_file=s390/s390-protos.h |
| md_file=s390/s390.md |
| extra_modes=s390/s390-modes.def |
| out_file=s390/s390.c |
| tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff s390/t-linux64" |
| ;; |
| s390x-ibm-tpf*) |
| tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h" |
| tm_p_file=s390/s390-protos.h |
| md_file=s390/s390.md |
| extra_modes=s390/s390-modes.def |
| extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o" |
| out_file=s390/s390.c |
| tmake_file="t-slibgcc-elf-ver s390/t-crtstuff s390/t-tpf" |
| ;; |
| sh-*-elf* | sh[2346l]*-*-elf* | sh*-*-kaos*) |
| tmake_file="sh/t-sh sh/t-elf" |
| case ${target} in |
| shl* | sh64l*) |
| tm_file="sh/little.h ${tm_file}" |
| tmake_file="${tmake_file} sh/t-le" |
| ;; |
| esac |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h" |
| case ${target} in |
| sh64*) |
| tmake_file="${tmake_file} sh/t-sh64" |
| tm_file="${tm_file} sh/sh64.h" |
| extra_headers="shmedia.h ushmedia.h sshmedia.h" |
| ;; |
| sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;; |
| sh4*) target_cpu_default="SELECT_SH4" ;; |
| sh3e*) target_cpu_default="SELECT_SH3E" ;; |
| sh3*) target_cpu_default="SELECT_SH3" ;; |
| sh2e*) target_cpu_default="SELECT_SH2E" ;; |
| sh2*) target_cpu_default="SELECT_SH2" ;; |
| esac |
| case ${target} in |
| sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;; |
| esac |
| case ${target} in |
| sh*-*-kaos*) tm_file="${tm_file} kaos.h sh/kaos-sh.h" ;; |
| esac |
| use_fixproto=yes |
| ;; |
| sh-*-rtemscoff*) |
| tmake_file="sh/t-sh t-rtems" |
| tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h" |
| ;; |
| sh-*-rtems*) |
| tmake_file="sh/t-sh sh/t-elf t-rtems" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h" |
| ;; |
| sh-*-linux* | sh[2346lbe]*-*-linux*) |
| tmake_file="sh/t-sh sh/t-elf t-slibgcc-elf-ver t-linux" |
| case ${target} in |
| sh*be-*-* | sh*eb-*-*) ;; |
| *) |
| tm_file="sh/little.h ${tm_file}" |
| tmake_file="${tmake_file} sh/t-le" |
| ;; |
| esac |
| tmake_file="${tmake_file} sh/t-linux" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h" |
| case ${target} in |
| sh64*) |
| tmake_file="${tmake_file} sh/t-sh64" |
| tm_file="${tm_file} sh/sh64.h" |
| extra_headers="shmedia.h ushmedia.h sshmedia.h" |
| ;; |
| sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;; |
| sh4*) target_cpu_default="SELECT_SH4" ;; |
| sh3e[lb]e*) target_cpu_default="SELECT_SH3E" ;; |
| sh3e[lb]*) target_cpu_default="SELECT_SH3" ;; |
| sh3e*) target_cpu_default="SELECT_SH3E" ;; |
| sh3*) target_cpu_default="SELECT_SH3" ;; |
| sh2e[lb]e*) target_cpu_default="SELECT_SH2E" ;; |
| sh2e[lb]*) target_cpu_default="SELECT_SH2" ;; |
| sh2e*) target_cpu_default="SELECT_SH2E" ;; |
| sh2*) target_cpu_default="SELECT_SH2" ;; |
| esac |
| case ${target} in |
| sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;; |
| esac |
| ;; |
| sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \ |
| sh64-*-netbsd* | sh64l*-*-netbsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h netbsd.h netbsd-elf.h sh/netbsd-elf.h" |
| tmake_file="${tmake_file} sh/t-sh sh/t-elf" |
| case ${target} in |
| sh*l*-*) |
| tm_file="sh/little.h ${tm_file}" |
| tmake_file="${tmake_file} sh/t-le" |
| ;; |
| *) |
| tmake_file="${tmake_file} sh/t-be" |
| ;; |
| esac |
| case ${target} in |
| sh5*-*) |
| # SHmedia, 32-bit ABI |
| target_cpu_default="SH5_BIT|SH4_BIT|SH3_BIT|SH_E_BIT" |
| tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5" |
| ;; |
| sh64*-*) |
| # SHmedia, 64-bit ABI |
| target_cpu_default="SH5_BIT|SH4_BIT" |
| tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5 sh/t-netbsd-sh5-64" |
| ;; |
| *) |
| # SH3, software floating point |
| target_cpu_default="SH1_BIT|SH2_BIT|SH3_BIT" |
| tmake_file="${tmake_file} sh/t-netbsd" |
| ;; |
| esac |
| ;; |
| sh-wrs-vxworks) |
| tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h" |
| ;; |
| sh-*-*) |
| tm_file="${tm_file} dbxcoff.h sh/coff.h" |
| use_fixproto=yes |
| ;; |
| sparc-tti-*) |
| tm_file="${tm_file} sparc/pbd.h" |
| use_fixproto=yes |
| ;; |
| sparc-*-netbsdelf*) |
| tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" |
| ;; |
| sparc-*-openbsd*) |
| tm_defines=OBSD_OLD_GAS |
| tm_file="sparc/sparc.h openbsd.h sparc/openbsd.h" |
| # needed to unconfuse gdb |
| tmake_file="t-libc-ok t-openbsd sparc/t-openbsd" |
| # we need collect2 until our bug is fixed... |
| use_collect2=yes |
| ;; |
| sparc64-*-openbsd*) |
| tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h" |
| gas=yes gnu_ld=yes |
| with_cpu=ultrasparc |
| ;; |
| sparc-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h" |
| tmake_file="sparc/t-elf sparc/t-crtfm" |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| sparc-*-linux*) # SPARC's running GNU/Linux, libc6 |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux sparc/t-crtfm" |
| ;; |
| sparc-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h" |
| tmake_file="sparc/t-elf sparc/t-crtfm t-rtems" |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| ;; |
| sparc64-*-solaris2* | sparcv9-*-solaris2*) |
| tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h" |
| fi |
| if test x$gas = xyes; then |
| tm_file="${tm_file} sparc/sol2-gas-bi.h" |
| fi |
| tmake_file="sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm" |
| if test x$gnu_ld = xyes; then |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o" |
| if test x${enable_threads} = x ; then |
| enable_threads=$have_pthread_h |
| if test x${enable_threads} = x ; then |
| enable_threads=$have_thread_h |
| fi |
| fi |
| if test x${enable_threads} = xyes ; then |
| if test x${have_pthread_h} = xyes ; then |
| thread_file='posix' |
| else |
| thread_file='solaris' |
| fi |
| fi |
| need_64bit_hwint=yes |
| ;; |
| sparc-*-solaris2*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld.h" |
| fi |
| tmake_file="sparc/t-sol2 sparc/t-crtfm" |
| if test x$gnu_ld = xyes; then |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| case ${target} in |
| *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) |
| if test x$gnu_ld = xno; then |
| tm_file="${tm_file} sparc/sol26-sld.h" |
| fi |
| ;; |
| *-*-solaris2.[789] | *-*-solaris2.1[0-9]) |
| tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld-bi.h" |
| fi |
| if test x$gas = xyes; then |
| tm_file="${tm_file} sparc/sol2-gas-bi.h" |
| fi |
| tmake_file="$tmake_file sparc/t-sol2-64" |
| need_64bit_hwint=yes |
| ;; |
| esac |
| extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o" |
| if test x${enable_threads} = x; then |
| enable_threads=$have_pthread_h |
| if test x${enable_threads} = x; then |
| enable_threads=$have_thread_h |
| fi |
| fi |
| if test x${enable_threads} = xyes; then |
| if test x${have_pthread_h} = xyes; then |
| thread_file='posix' |
| else |
| thread_file='solaris' |
| fi |
| fi |
| ;; |
| sparc-*-sysv4*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h" |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| sparclite-*-coff*) |
| tm_file="${tm_file} sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h" |
| tmake_file=sparc/t-sparclite |
| ;; |
| sparclite-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/liteelf.h" |
| tmake_file="sparc/t-sparclite sparc/t-crtfm" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| sparc86x-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/sp86x-elf.h" |
| tmake_file="sparc/t-sp86x sparc/t-crtfm" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| sparc64-*-aout*) |
| tm_file="sparc/sparc.h sparc/aout.h sparc/sp64-aout.h" |
| use_fixproto=yes |
| ;; |
| sparc64-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sp64-elf.h" |
| tmake_file="${tmake_file} sparc/t-crtfm" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| sparc64-*-freebsd*|ultrasparc-*-freebsd*) |
| tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h" |
| tmake_file="${tmake_file} sparc/t-crtfm" |
| case "x$with_cpu" in |
| xultrasparc) ;; |
| x) with_cpu=ultrasparc ;; |
| *) echo "$with_cpu not supported for freebsd target"; exit 1 ;; |
| esac |
| need_64bit_hwint=yes |
| ;; |
| sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux |
| tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64 sparc/t-crtfm" |
| tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h" |
| ;; |
| sparc64-*-netbsd*) |
| tmake_file="${tmake_file} sparc/t-netbsd64" |
| tm_file="sparc/biarch64.h ${tm_file}" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" |
| ;; |
| strongarm-*-elf*) |
| tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file=arm/t-strongarm-elf |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| use_fixproto=yes |
| ;; |
| strongarm-*-pe) |
| tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h" |
| tmake_file=arm/t-strongarm-pe |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| extra_objs=pe.o |
| use_fixproto=yes |
| ;; |
| strongarm-*-kaos*) |
| tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h" |
| tmake_file=arm/t-strongarm-elf |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| ;; |
| v850e1-*-*) |
| target_cpu_default="TARGET_CPU_v850e1" |
| tm_file="dbxelf.h elfos.h svr4.h v850/v850.h" |
| tm_p_file=v850/v850-protos.h |
| tmake_file=v850/t-v850e |
| md_file=v850/v850.md |
| out_file=v850/v850.c |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| use_fixproto=yes |
| ;; |
| v850e-*-*) |
| target_cpu_default="TARGET_CPU_v850e" |
| tm_file="dbxelf.h elfos.h svr4.h v850/v850.h" |
| tm_p_file=v850/v850-protos.h |
| tmake_file=v850/t-v850e |
| md_file=v850/v850.md |
| out_file=v850/v850.c |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| use_fixproto=yes |
| ;; |
| v850-*-*) |
| target_cpu_default="TARGET_CPU_generic" |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| tmake_file=v850/t-v850 |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| use_fixproto=yes |
| ;; |
| vax-*-bsd*) # VAXen running BSD |
| tm_file="${tm_file} vax/bsd.h" |
| use_collect2=yes |
| use_fixproto=yes |
| ;; |
| vax-*-sysv*) # VAXen running system V |
| tm_file="${tm_file} vax/vaxv.h" |
| use_fixproto=yes |
| ;; |
| vax-*-netbsdelf*) |
| tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h" |
| ;; |
| vax-*-netbsd*) |
| tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h" |
| tmake_file=t-netbsd |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| vax-*-openbsd*) |
| tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h" |
| use_collect2=yes |
| ;; |
| vax-*-ultrix*) # VAXen running ultrix |
| tm_file="${tm_file} vax/ultrix.h" |
| use_fixproto=yes |
| ;; |
| vax-*-*) # VAX default entry |
| if test "x$enable_obsolete" != xyes; then |
| echo "*** Configuration ${target} is obsolete." >&2 |
| echo "*** Specify --enable-obsolete to build it anyway." >&2 |
| echo "*** Support will be REMOVED in the next major release of GCC," >&2 |
| echo "*** unless a maintainer comes forward." >&2 |
| exit 1 |
| fi |
| use_fixproto=yes |
| ;; |
| xscale-*-elf) |
| tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file=arm/t-xscale-elf |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| use_fixproto=yes |
| ;; |
| xscale-*-coff) |
| tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h" |
| tmake_file=arm/t-xscale-coff |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| use_fixproto=yes |
| ;; |
| xstormy16-*-elf) |
| # For historical reasons, the target files omit the 'x'. |
| tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h" |
| tm_p_file=stormy16/stormy16-protos.h |
| md_file=stormy16/stormy16.md |
| out_file=stormy16/stormy16.c |
| tmake_file="stormy16/t-stormy16" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| xtensa-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h" |
| tmake_file="xtensa/t-xtensa xtensa/t-elf" |
| ;; |
| xtensa-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux xtensa/t-xtensa xtensa/t-linux" |
| ;; |
| am33_2.0-*-linux*) |
| tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h" |
| tmake_file="t-slibgcc-elf-ver t-linux mn10300/t-linux" |
| gas=yes gnu_ld=yes |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" |
| use_collect2=no |
| ;; |
| *) |
| echo "*** Configuration ${target} not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # Support for --with-cpu and related options (and a few unrelated options, |
| # too). |
| case ${with_cpu} in |
| yes | no) |
| echo "--with-cpu must be passed a value" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # If there is no $with_cpu option, try to infer one from ${target}. |
| # This block sets nothing except for with_cpu. |
| if test x$with_cpu = x ; then |
| case ${target} in |
| ep9312-*-*) |
| # A Cirrus ARM variant. |
| with_cpu="ep9312" |
| ;; |
| i486-*-*) |
| with_cpu=i486 |
| ;; |
| i586-*-*) |
| case ${target_noncanonical} in |
| k6_2-*) |
| with_cpu=k6-2 |
| ;; |
| k6_3-*) |
| with_cpu=k6-3 |
| ;; |
| k6-*) |
| with_cpu=k6 |
| ;; |
| pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*) |
| with_cpu=pentium-mmx |
| ;; |
| *) |
| with_cpu=pentium |
| ;; |
| esac |
| ;; |
| i686-*-* | i786-*-*) |
| case ${target_noncanonical} in |
| k8-*|opteron-*|athlon_64-*) |
| with_cpu=k8 |
| ;; |
| athlon_xp-*|athlon_mp-*|athlon_4-*) |
| with_cpu=athlon-4 |
| ;; |
| athlon_tbird-*|athlon-*) |
| with_cpu=athlon |
| ;; |
| pentium2-*) |
| with_cpu=pentium2 |
| ;; |
| pentium3-*|pentium3m-*) |
| with_cpu=pentium3 |
| ;; |
| pentium4-*|pentium4m-*) |
| with_cpu=pentium4 |
| ;; |
| prescott-*) |
| with_cpu=prescott |
| ;; |
| nocona-*) |
| with_cpu=nocona |
| ;; |
| pentium_m-*) |
| with_cpu=pentium-m |
| ;; |
| *) |
| with_cpu=pentiumpro |
| ;; |
| esac |
| ;; |
| x86_64-*-*) |
| with_cpu=k8 |
| ;; |
| alphaev6[78]*-*-*) |
| with_cpu=ev67 |
| ;; |
| alphaev6*-*-*) |
| with_cpu=ev6 |
| ;; |
| alphapca56*-*-*) |
| with_cpu=pca56 |
| ;; |
| alphaev56*-*-*) |
| with_cpu=ev56 |
| ;; |
| alphaev5*-*-*) |
| with_cpu=ev5 |
| ;; |
| sparc*-*-*) |
| with_cpu="`echo ${target} | sed 's/-.*$//'`" |
| if [ x$with_cpu = xsparc64 ]; then |
| with_cpu=v9 |
| fi |
| ;; |
| esac |
| fi |
| |
| # Similarly for --with-schedule. |
| if test x$with_schedule = x; then |
| case ${target} in |
| hppa1* | parisc1*) |
| # Override default PA8000 scheduling model. |
| with_schedule=7100LC |
| ;; |
| esac |
| fi |
| |
| # Validate and mark as valid any --with options supported |
| # by this target. In order to use a particular --with option |
| # you must list it in supported_defaults; validating the value |
| # is optional. This case statement should set nothing besides |
| # supported_defaults. |
| |
| supported_defaults= |
| case "${target}" in |
| alpha*-*-*) |
| supported_defaults="cpu tune" |
| for which in cpu tune; do |
| eval "val=\$with_$which" |
| case "$val" in |
| "" \ |
| | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \ |
| | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \ |
| | 21264a) |
| ;; |
| *) |
| echo "Unknown CPU used in --with-$which=$val" 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| ;; |
| |
| arm*-*-*) |
| supported_defaults="arch cpu float tune" |
| for which in cpu tune; do |
| eval "val=\$with_$which" |
| case "$val" in |
| "" \ |
| | arm[236789] | arm250 | arm[67][01]0 \ |
| | arm60 | arm620 | arm7d | arm7di \ |
| | arm7m | arm7dm | arm7dmi | arm[79]tdmi \ |
| | arm70 | arm700i | arm710t | arm720 \ |
| | arm720t | arm740t | arm710c | arm920 \ |
| | arm920t | arm926ejs | arm940t | arm9e | arm10tdmi \ |
| | arm7100 | arm7500 | arm7500fe | arm810 \ |
| | arm1026ejs | arm1020t | arm1136js | arm1136jfs \ |
| | xscale | iwmmxt \ |
| | ep9312 \ |
| | strongarm | strongarm110 | strongarm11[01]0) |
| # OK |
| ;; |
| *) |
| echo "Unknown CPU used in --with-$which=$val" 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| case "$with_arch" in |
| "" \ |
| | armv[2345] | armv2a | armv3m | armv4t | armv5t \ |
| | armv5te | armv6j | ep9312) |
| # OK |
| ;; |
| *) |
| echo "Unknown arch used in --with-arch=$with_arch" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_float" in |
| "" \ |
| | soft | hard) |
| # OK |
| ;; |
| *) |
| echo "Unknown floating point type used in --with-float=$with_float" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| if test "x$with_arch" != x && test "x$with_cpu" != x; then |
| echo "Warning: --with-arch overrides --with-cpu" 1>&2 |
| fi |
| ;; |
| |
| hppa*-*-* | parisc*-*-*) |
| supported_defaults="arch schedule" |
| |
| case "$with_arch" in |
| "" | 1.0 | 1.1 | 2.0) |
| # OK |
| ;; |
| *) |
| echo "Unknown architecture used in --with-arch=$with_arch" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_schedule" in |
| "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000) |
| # OK |
| ;; |
| *) |
| echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| i[34567]86-*-* | x86_64-*-*) |
| supported_defaults="arch cpu tune" |
| for which in arch cpu tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| "" | i386 | i486 \ |
| | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \ |
| | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \ |
| | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \ |
| | athlon-4 | athlon-xp | athlon-mp | k8 | opteron \ |
| | athlon64 | athlon-fx | prescott | pentium-m \ |
| | pentium4m | pentium3m| nocona) |
| # OK |
| ;; |
| *) |
| echo "Unknown CPU given in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| ;; |
| |
| mips*-*-*) |
| supported_defaults="abi arch float tune" |
| |
| case ${with_float} in |
| "" | soft | hard) |
| # OK |
| ;; |
| *) |
| echo "Unknown floating point type used in --with-float=$with_float" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_abi} in |
| "" | 32 | o64 | n32 | 64 | eabi) |
| # OK |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| powerpc*-*-* | rs6000-*-*) |
| supported_defaults="cpu float tune" |
| |
| for which in cpu tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| default32 | default64) |
| with_which="with_$which" |
| eval $with_which= |
| ;; |
| "" | common \ |
| | power | power2 | power3 | power4 \ |
| | powerpc | powerpc64 \ |
| | rios | rios1 | rios2 | rsc | rsc1 | rs64a \ |
| | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \ |
| | 601 | 602 | 603 | 603e | ec603e | 604 \ |
| | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \ |
| | 8540 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| ;; |
| |
| s390*-*-*) |
| supported_defaults="arch mode tune" |
| |
| for which in arch tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| "" | g5 | g6 | z900 | z990) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| case ${with_mode} in |
| "" | esa | zarch) |
| # OK |
| ;; |
| *) |
| echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| sparc*-*-*) |
| supported_defaults="cpu float tune" |
| |
| for which in cpu tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| "" | sparc | sparcv9 | sparc64 | sparc86x \ |
| | v7 | cypress | v8 | supersparc | sparclite | f930 \ |
| | f934 | hypersparc | sparclite86x | sparclet | tsc701 \ |
| | v9 | ultrasparc | ultrasparc3) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val" 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| case ${with_float} in |
| "" | soft | hard) |
| # OK |
| ;; |
| *) |
| echo "Unknown floating point type used in --with-float=$with_float" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| v850*-*-*) |
| supported_defaults=cpu |
| case ${with_cpu} in |
| "" | v850e | v850e1) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| esac |
| |
| # Set some miscellaneous flags for particular targets. |
| target_cpu_default2= |
| case ${target} in |
| alpha*-*-*) |
| if test x$gas = xyes |
| then |
| target_cpu_default2="MASK_GAS" |
| fi |
| ;; |
| |
| arm*-*-*) |
| case "x$with_cpu" in |
| x) |
| # The most generic |
| target_cpu_default2="TARGET_CPU_generic" |
| ;; |
| |
| *) |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| esac |
| ;; |
| |
| hppa*-*-* | parisc*-*-*) |
| if test x$gas = xyes |
| then |
| target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY" |
| fi |
| ;; |
| |
| mips*-*-*) |
| case ${target} in |
| mips*-*-ecoff* | mips*-*-elf*) |
| if test x$gas = xyes |
| then |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR" |
| else |
| target_cpu_default2="MASK_GAS" |
| fi |
| fi |
| ;; |
| mips*-*-*) |
| if test x$gas = xyes |
| then |
| target_cpu_default2="MASK_GAS" |
| fi |
| ;; |
| esac |
| case ${target} in |
| mips*el-*-*) |
| tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines" |
| ;; |
| esac |
| case $tm_file in |
| *mips/elf.h* | *mips/elf64.h*) |
| tm_defines="OBJECT_FORMAT_ELF $tm_defines" |
| ;; |
| esac |
| if test "x$enable_gofast" = xyes |
| then |
| tm_defines="US_SOFTWARE_GOFAST $tm_defines" |
| tmake_file="mips/t-gofast $tmake_file" |
| else |
| tmake_file="mips/t-mips $tmake_file" |
| fi |
| ;; |
| |
| powerpc*-*-* | rs6000-*-*) |
| if test x$enable_altivec = xyes |
| then |
| tm_file="$tm_file rs6000/altivec-defs.h" |
| fi |
| # FIXME: The PowerPC port uses the value set at compile time, |
| # although it's only cosmetic. |
| if test "x$with_cpu" != x |
| then |
| target_cpu_default2="\\\"$with_cpu\\\"" |
| fi |
| out_file=rs6000/rs6000.c |
| c_target_objs="${c_target_objs} rs6000-c.o" |
| cxx_target_objs="${cxx_target_objs} rs6000-c.o" |
| tmake_file="rs6000/t-rs6000 ${tmake_file}" |
| ;; |
| |
| sparc*-*-*) |
| # Some standard aliases. |
| case x$with_cpu in |
| xsparc) |
| with_cpu=v7 |
| ;; |
| xsparc86x) |
| with_cpu=sparclite86x |
| ;; |
| xsparcv9 | xsparc64) |
| with_cpu=v9 |
| ;; |
| esac |
| |
| # The Sparc port checks this value at compile-time. |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| v850*-*-*) |
| # FIXME: The v850 is "special" in that it does not support |
| # runtime CPU selection, only --with-cpu. |
| case "x$with_cpu" in |
| x) |
| ;; |
| xv850e) |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| esac |
| ;; |
| esac |
| |
| t= |
| all_defaults="abi cpu arch tune schedule float mode" |
| for option in $all_defaults |
| do |
| eval "val=\$with_$option" |
| if test -n "$val"; then |
| case " $supported_defaults " in |
| *" $option "*) |
| ;; |
| *) |
| echo "This target does not support --with-$option." 2>&1 |
| exit 1 |
| ;; |
| esac |
| |
| if test "x$t" = x |
| then |
| t="{ \"$option\", \"$val\" }" |
| else |
| t="${t}, { \"$option\", \"$val\" }" |
| fi |
| fi |
| done |
| if test "x$t" = x |
| then |
| configure_default_options="{ { NULL, NULL} }" |
| else |
| configure_default_options="{ ${t} }" |
| fi |
| |
| if test "$target_cpu_default2" != "" |
| then |
| if test "$target_cpu_default" != "" |
| then |
| target_cpu_default="(${target_cpu_default}|${target_cpu_default2})" |
| else |
| target_cpu_default=$target_cpu_default2 |
| fi |
| fi |