| /* This file contains the definitions and documentation for the |
| machine modes used in the GNU compiler. |
| Copyright (C) 1987-2017 Free Software Foundation, Inc. |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it under |
| the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 3, or (at your option) any later |
| version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| |
| /* This file defines all the MACHINE MODES used by GCC. |
| |
| A machine mode specifies a size and format of data |
| at the machine level. |
| |
| Each RTL expression has a machine mode. |
| |
| At the syntax tree level, each ..._TYPE and each ..._DECL node |
| has a machine mode which describes data of that type or the |
| data of the variable declared. */ |
| |
| /* This file is included by the genmodes program. Its text is the |
| body of a function. Do not rely on this, it will change in the |
| future. |
| |
| The following statements can be used in this file -- all have |
| the form of a C macro call. In their arguments: |
| |
| A CLASS argument must be one of the constants defined in |
| mode-classes.def, less the leading MODE_ prefix; some statements |
| that take CLASS arguments have restrictions on which classes are |
| acceptable. For instance, INT. |
| |
| A MODE argument must be the printable name of a machine mode, |
| without quotation marks or trailing "mode". For instance, SI. |
| |
| A PRECISION, BYTESIZE, or COUNT argument must be a positive integer |
| constant. |
| |
| A FORMAT argument must be one of the real_mode_format structures |
| declared in real.h, or else a literal 0. Do not put a leading & |
| on the argument. |
| |
| An EXPR argument must be a syntactically valid C expression. |
| If an EXPR contains commas, you may need to write an extra pair of |
| parentheses around it, so it appears to be a single argument to the |
| statement. |
| |
| This file defines only those modes which are of use on almost all |
| machines. Other modes can be defined in the target-specific |
| mode definition file, config/ARCH/ARCH-modes.def. |
| |
| Order matters in this file in so far as statements which refer to |
| other modes must appear after the modes they refer to. However, |
| statements which do not refer to other modes may appear in any |
| order. |
| |
| RANDOM_MODE (MODE); |
| declares MODE to be of class RANDOM. |
| |
| CC_MODE (MODE); |
| declares MODE to be of class CC. |
| |
| INT_MODE (MODE, BYTESIZE); |
| declares MODE to be of class INT and BYTESIZE bytes wide. |
| All of the bits of its representation are significant. |
| |
| FRACTIONAL_INT_MODE (MODE, PRECISION, BYTESIZE); |
| declares MODE to be of class INT, BYTESIZE bytes wide in |
| storage, but with only PRECISION significant bits. |
| |
| FLOAT_MODE (MODE, BYTESIZE, FORMAT); |
| declares MODE to be of class FLOAT and BYTESIZE bytes wide, |
| using floating point format FORMAT. |
| All of the bits of its representation are significant. |
| |
| FRACTIONAL_FLOAT_MODE (MODE, PRECISION, BYTESIZE, FORMAT); |
| declares MODE to be of class FLOAT, BYTESIZE bytes wide in |
| storage, but with only PRECISION significant bits, using |
| floating point format FORMAT. |
| |
| DECIMAL_FLOAT_MODE (MODE, BYTESIZE, FORMAT); |
| declares MODE to be of class DECIMAL_FLOAT and BYTESIZE bytes |
| wide. All of the bits of its representation are significant. |
| |
| FRACTIONAL_DECIMAL_FLOAT_MODE (MODE, BYTESIZE, FORMAT); |
| declares MODE to be of class DECIMAL_FLOAT and BYTESIZE bytes |
| wide. All of the bits of its representation are significant. |
| |
| FRACT_MODE (MODE, BYTESIZE, FBIT); |
| declares MODE to be of class FRACT and BYTESIZE bytes wide |
| with FBIT fractional bits. There may be padding bits. |
| |
| UFRACT_MODE (MODE, BYTESIZE, FBIT); |
| declares MODE to be of class UFRACT and BYTESIZE bytes wide |
| with FBIT fractional bits. There may be padding bits. |
| |
| ACCUM_MODE (MODE, BYTESIZE, IBIT, FBIT); |
| declares MODE to be of class ACCUM and BYTESIZE bytes wide |
| with IBIT integral bits and FBIT fractional bits. |
| There may be padding bits. |
| |
| UACCUM_MODE (MODE, BYTESIZE, IBIT, FBIT); |
| declares MODE to be of class UACCUM and BYTESIZE bytes wide |
| with IBIT integral bits and FBIT fractional bits. |
| There may be padding bits. |
| |
| RESET_FLOAT_FORMAT (MODE, FORMAT); |
| changes the format of MODE, which must be class FLOAT, |
| to FORMAT. Use in an ARCH-modes.def to reset the format |
| of one of the float modes defined in this file. |
| |
| PARTIAL_INT_MODE (MODE, PRECISION, NAME); |
| declares a mode of class PARTIAL_INT with the same size as |
| MODE (which must be an INT mode) and precision PREC. |
| Optionally, NAME is the new name of the mode. NAME is the |
| name of the mode. |
| |
| VECTOR_MODE (CLASS, MODE, COUNT); |
| Declare a vector mode whose component mode is MODE (of class |
| CLASS) with COUNT components. CLASS must be INT or FLOAT. |
| The name of the vector mode takes the form VnX where n is |
| COUNT in decimal and X is MODE. |
| |
| VECTOR_MODES (CLASS, WIDTH); |
| For all modes presently declared in class CLASS, construct |
| corresponding vector modes having width WIDTH. Modes whose |
| byte sizes do not evenly divide WIDTH are ignored, as are |
| modes that would produce vector modes with only one component, |
| and modes smaller than one byte (if CLASS is INT) or smaller |
| than two bytes (if CLASS is FLOAT). CLASS must be INT or |
| FLOAT. The names follow the same rule as VECTOR_MODE uses. |
| |
| COMPLEX_MODES (CLASS); |
| For all modes presently declared in class CLASS, construct |
| corresponding complex modes. Modes smaller than one byte |
| are ignored. For FLOAT modes, the names are derived by |
| replacing the 'F' in the mode name with a 'C'. (It is an |
| error if there is no 'F'. For INT modes, the names are |
| derived by prefixing a C to the name. |
| |
| ADJUST_BYTESIZE (MODE, EXPR); |
| ADJUST_ALIGNMENT (MODE, EXPR); |
| ADJUST_FLOAT_FORMAT (MODE, EXPR); |
| ADJUST_IBIT (MODE, EXPR); |
| ADJUST_FBIT (MODE, EXPR); |
| Arrange for the byte size, alignment, floating point format, ibit, |
| or fbit of MODE to be adjustable at run time. EXPR will be executed |
| once after processing all command line options, and should |
| evaluate to the desired byte size, alignment, format, ibit or fbit. |
| |
| Unlike a FORMAT argument, if you are adjusting a float format |
| you must put an & in front of the name of each format structure. |
| |
| Note: If a mode is ever made which is more than 255 bytes wide, |
| machmode.h and genmodes.c will have to be changed to allocate |
| more space for the mode_size and mode_alignment arrays. */ |
| |
| /* VOIDmode is used when no mode needs to be specified, |
| as for example on CONST_INT RTL expressions. */ |
| RANDOM_MODE (VOID); |
| |
| /* BLKmode is used for structures, arrays, etc. |
| that fit no more specific mode. */ |
| RANDOM_MODE (BLK); |
| |
| /* Single bit mode used for booleans. */ |
| FRACTIONAL_INT_MODE (BI, 1, 1); |
| |
| /* Basic integer modes. We go up to TI in generic code (128 bits). |
| TImode is needed here because the some front ends now genericly |
| support __int128. If the front ends decide to generically support |
| larger types, then corresponding modes must be added here. The |
| name OI is reserved for a 256-bit type (needed by some back ends). |
| */ |
| INT_MODE (QI, 1); |
| INT_MODE (HI, 2); |
| INT_MODE (SI, 4); |
| INT_MODE (DI, 8); |
| INT_MODE (TI, 16); |
| |
| /* No partial integer modes are defined by default. */ |
| |
| /* The target normally defines any target-specific __intN types and |
| their modes, but __int128 for TImode is fairly common so define it |
| here. The type will not be created unless the target supports |
| TImode. */ |
| |
| INT_N (TI, 128); |
| |
| /* Basic floating point modes. SF and DF are the only modes provided |
| by default. The names QF, HF, XF, and TF are reserved for targets |
| that need 1-word, 2-word, 80-bit, or 128-bit float types respectively. |
| |
| These are the IEEE mappings. They can be overridden with |
| RESET_FLOAT_FORMAT or at runtime (in TARGET_OPTION_OVERRIDE). */ |
| |
| FLOAT_MODE (SF, 4, ieee_single_format); |
| FLOAT_MODE (DF, 8, ieee_double_format); |
| |
| /* Basic CC modes. |
| FIXME define this only for targets that need it. */ |
| CC_MODE (CC); |
| |
| /* Fixed-point modes. */ |
| FRACT_MODE (QQ, 1, 7); /* s.7 */ |
| FRACT_MODE (HQ, 2, 15); /* s.15 */ |
| FRACT_MODE (SQ, 4, 31); /* s.31 */ |
| FRACT_MODE (DQ, 8, 63); /* s.63 */ |
| FRACT_MODE (TQ, 16, 127); /* s.127 */ |
| |
| UFRACT_MODE (UQQ, 1, 8); /* .8 */ |
| UFRACT_MODE (UHQ, 2, 16); /* .16 */ |
| UFRACT_MODE (USQ, 4, 32); /* .32 */ |
| UFRACT_MODE (UDQ, 8, 64); /* .64 */ |
| UFRACT_MODE (UTQ, 16, 128); /* .128 */ |
| |
| ACCUM_MODE (HA, 2, 8, 7); /* s8.7 */ |
| ACCUM_MODE (SA, 4, 16, 15); /* s16.15 */ |
| ACCUM_MODE (DA, 8, 32, 31); /* s32.31 */ |
| ACCUM_MODE (TA, 16, 64, 63); /* s64.63 */ |
| |
| UACCUM_MODE (UHA, 2, 8, 8); /* 8.8 */ |
| UACCUM_MODE (USA, 4, 16, 16); /* 16.16 */ |
| UACCUM_MODE (UDA, 8, 32, 32); /* 32.32 */ |
| UACCUM_MODE (UTA, 16, 64, 64); /* 64.64 */ |
| |
| /* Allow the target to specify additional modes of various kinds. */ |
| #if HAVE_EXTRA_MODES |
| # include EXTRA_MODES_FILE |
| #endif |
| |
| /* Complex modes. */ |
| COMPLEX_MODES (INT); |
| COMPLEX_MODES (PARTIAL_INT); |
| COMPLEX_MODES (FLOAT); |
| |
| /* Decimal floating point modes. */ |
| DECIMAL_FLOAT_MODE (SD, 4, decimal_single_format); |
| DECIMAL_FLOAT_MODE (DD, 8, decimal_double_format); |
| DECIMAL_FLOAT_MODE (TD, 16, decimal_quad_format); |
| |
| /* The symbol Pmode stands for one of the above machine modes (usually SImode). |
| The tm.h file specifies which one. It is not a distinct mode. */ |
| |
| /* |
| Local variables: |
| mode:c |
| version-control: t |
| End: |
| */ |