| ; Options for the rs6000 port of the compiler |
| ; |
| ; Copyright (C) 2005-2018 Free Software Foundation, Inc. |
| ; Contributed by Aldy Hernandez <aldy@quesejoda.com>. |
| ; |
| ; This file is part of GCC. |
| ; |
| ; GCC is free software; you can redistribute it and/or modify it under |
| ; the terms of the GNU General Public License as published by the Free |
| ; Software Foundation; either version 3, or (at your option) any later |
| ; version. |
| ; |
| ; GCC is distributed in the hope that it will be useful, but WITHOUT |
| ; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| ; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| ; License for more details. |
| ; |
| ; You should have received a copy of the GNU General Public License |
| ; along with GCC; see the file COPYING3. If not see |
| ; <http://www.gnu.org/licenses/>. |
| |
| HeaderInclude |
| config/rs6000/rs6000-opts.h |
| |
| ;; ISA flag bits (on/off) |
| Variable |
| HOST_WIDE_INT rs6000_isa_flags = TARGET_DEFAULT |
| |
| TargetSave |
| HOST_WIDE_INT x_rs6000_isa_flags |
| |
| ;; Miscellaneous flag bits that were set explicitly by the user |
| Variable |
| HOST_WIDE_INT rs6000_isa_flags_explicit |
| |
| TargetSave |
| HOST_WIDE_INT x_rs6000_isa_flags_explicit |
| |
| ;; Current processor |
| TargetVariable |
| enum processor_type rs6000_cpu = PROCESSOR_PPC603 |
| |
| ;; Current tuning |
| TargetVariable |
| enum processor_type rs6000_tune = PROCESSOR_PPC603 |
| |
| ;; Always emit branch hint bits. |
| TargetVariable |
| unsigned char rs6000_always_hint |
| |
| ;; Schedule instructions for group formation. |
| TargetVariable |
| unsigned char rs6000_sched_groups |
| |
| ;; Align branch targets. |
| TargetVariable |
| unsigned char rs6000_align_branch_targets |
| |
| ;; Support for -msched-costly-dep option. |
| TargetVariable |
| enum rs6000_dependence_cost rs6000_sched_costly_dep = no_dep_costly |
| |
| ;; Support for -minsert-sched-nops option. |
| TargetVariable |
| enum rs6000_nop_insertion rs6000_sched_insert_nops = sched_finish_none |
| |
| ;; Non-zero to allow overriding loop alignment. |
| TargetVariable |
| unsigned char can_override_loop_align |
| |
| ;; Which small data model to use (for System V targets only) |
| TargetVariable |
| enum rs6000_sdata_type rs6000_sdata = SDATA_DATA |
| |
| ;; Bit size of immediate TLS offsets and string from which it is decoded. |
| TargetVariable |
| int rs6000_tls_size = 32 |
| |
| ;; ABI enumeration available for subtarget to use. |
| TargetVariable |
| enum rs6000_abi rs6000_current_abi = ABI_NONE |
| |
| ;; Type of traceback to use. |
| TargetVariable |
| enum rs6000_traceback_type rs6000_traceback = traceback_default |
| |
| ;; Control alignment for fields within structures. |
| TargetVariable |
| unsigned char rs6000_alignment_flags |
| |
| ;; Code model for 64-bit linux. |
| TargetVariable |
| enum rs6000_cmodel rs6000_current_cmodel = CMODEL_SMALL |
| |
| ;; What type of reciprocal estimation instructions to generate |
| TargetVariable |
| unsigned int rs6000_recip_control |
| |
| ;; Mask of what builtin functions are allowed |
| TargetVariable |
| HOST_WIDE_INT rs6000_builtin_mask |
| |
| ;; Debug flags |
| TargetVariable |
| unsigned int rs6000_debug |
| |
| ;; Whether to enable the -mfloat128 stuff without necessarily enabling the |
| ;; __float128 keyword. |
| TargetSave |
| unsigned char x_TARGET_FLOAT128_TYPE |
| |
| Variable |
| unsigned char TARGET_FLOAT128_TYPE |
| |
| ;; This option existed in the past, but now is always on. |
| mpowerpc |
| Target RejectNegative Undocumented Ignore |
| |
| mpowerpc64 |
| Target Report Mask(POWERPC64) Var(rs6000_isa_flags) |
| Use PowerPC-64 instruction set. |
| |
| mpowerpc-gpopt |
| Target Report Mask(PPC_GPOPT) Var(rs6000_isa_flags) |
| Use PowerPC General Purpose group optional instructions. |
| |
| mpowerpc-gfxopt |
| Target Report Mask(PPC_GFXOPT) Var(rs6000_isa_flags) |
| Use PowerPC Graphics group optional instructions. |
| |
| mmfcrf |
| Target Report Mask(MFCRF) Var(rs6000_isa_flags) |
| Use PowerPC V2.01 single field mfcr instruction. |
| |
| mpopcntb |
| Target Report Mask(POPCNTB) Var(rs6000_isa_flags) |
| Use PowerPC V2.02 popcntb instruction. |
| |
| mfprnd |
| Target Report Mask(FPRND) Var(rs6000_isa_flags) |
| Use PowerPC V2.02 floating point rounding instructions. |
| |
| mcmpb |
| Target Report Mask(CMPB) Var(rs6000_isa_flags) |
| Use PowerPC V2.05 compare bytes instruction. |
| |
| mmfpgpr |
| Target Report Mask(MFPGPR) Var(rs6000_isa_flags) |
| Use extended PowerPC V2.05 move floating point to/from GPR instructions. |
| |
| maltivec |
| Target Report Mask(ALTIVEC) Var(rs6000_isa_flags) |
| Use AltiVec instructions. |
| |
| maltivec=le |
| Target Report RejectNegative Var(rs6000_altivec_element_order, 1) Save |
| Generate AltiVec instructions using little-endian element order. |
| |
| maltivec=be |
| Target Report RejectNegative Var(rs6000_altivec_element_order, 2) |
| Generate AltiVec instructions using big-endian element order. |
| |
| mfold-gimple |
| Target Report Var(rs6000_fold_gimple) Init(1) |
| Enable early gimple folding of builtins. |
| |
| mhard-dfp |
| Target Report Mask(DFP) Var(rs6000_isa_flags) |
| Use decimal floating point instructions. |
| |
| mmulhw |
| Target Report Mask(MULHW) Var(rs6000_isa_flags) |
| Use 4xx half-word multiply instructions. |
| |
| mdlmzb |
| Target Report Mask(DLMZB) Var(rs6000_isa_flags) |
| Use 4xx string-search dlmzb instruction. |
| |
| mmultiple |
| Target Report Mask(MULTIPLE) Var(rs6000_isa_flags) |
| Generate load/store multiple instructions. |
| |
| ;; This option existed in the past, but now is always off. |
| mno-string |
| Target RejectNegative Undocumented Ignore |
| |
| mstring |
| Target RejectNegative Undocumented Warn(%<-mstring%> is deprecated) |
| |
| msoft-float |
| Target Report RejectNegative Mask(SOFT_FLOAT) Var(rs6000_isa_flags) |
| Do not use hardware floating point. |
| |
| mhard-float |
| Target Report RejectNegative InverseMask(SOFT_FLOAT, HARD_FLOAT) Var(rs6000_isa_flags) |
| Use hardware floating point. |
| |
| mpopcntd |
| Target Report Mask(POPCNTD) Var(rs6000_isa_flags) |
| Use PowerPC V2.06 popcntd instruction. |
| |
| mfriz |
| Target Report Var(TARGET_FRIZ) Init(-1) Save |
| Under -ffast-math, generate a FRIZ instruction for (double)(long long) conversions. |
| |
| mveclibabi= |
| Target RejectNegative Joined Var(rs6000_veclibabi_name) |
| Vector library ABI to use. |
| |
| mvsx |
| Target Report Mask(VSX) Var(rs6000_isa_flags) |
| Use vector/scalar (VSX) instructions. |
| |
| mvsx-align-128 |
| Target Undocumented Report Var(TARGET_VSX_ALIGN_128) Save |
| ; If -mvsx, set alignment to 128 bits instead of 32/64 |
| |
| mallow-movmisalign |
| Target Undocumented Var(TARGET_ALLOW_MOVMISALIGN) Init(-1) Save |
| ; Allow the movmisalign in DF/DI vectors |
| |
| mefficient-unaligned-vsx |
| Target Undocumented Report Mask(EFFICIENT_UNALIGNED_VSX) Var(rs6000_isa_flags) |
| ; Consider unaligned VSX vector and fp accesses to be efficient |
| |
| msched-groups |
| Target Undocumented Report Var(TARGET_SCHED_GROUPS) Init(-1) Save |
| ; Explicitly set rs6000_sched_groups |
| |
| malways-hint |
| Target Undocumented Report Var(TARGET_ALWAYS_HINT) Init(-1) Save |
| ; Explicitly set rs6000_always_hint |
| |
| malign-branch-targets |
| Target Undocumented Report Var(TARGET_ALIGN_BRANCH_TARGETS) Init(-1) Save |
| ; Explicitly set rs6000_align_branch_targets |
| |
| mno-update |
| Target Report RejectNegative Mask(NO_UPDATE) Var(rs6000_isa_flags) |
| Do not generate load/store with update instructions. |
| |
| mupdate |
| Target Report RejectNegative InverseMask(NO_UPDATE, UPDATE) Var(rs6000_isa_flags) |
| Generate load/store with update instructions. |
| |
| msingle-pic-base |
| Target Report Var(TARGET_SINGLE_PIC_BASE) Init(0) |
| Do not load the PIC register in function prologues. |
| |
| mavoid-indexed-addresses |
| Target Report Var(TARGET_AVOID_XFORM) Init(-1) Save |
| Avoid generation of indexed load/store instructions when possible. |
| |
| mtls-markers |
| Target Report Var(tls_markers) Init(1) Save |
| Mark __tls_get_addr calls with argument info. |
| |
| msched-epilog |
| Target Undocumented Var(TARGET_SCHED_PROLOG) Init(1) Save |
| |
| msched-prolog |
| Target Report Var(TARGET_SCHED_PROLOG) Save |
| Schedule the start and end of the procedure. |
| |
| maix-struct-return |
| Target Report RejectNegative Var(aix_struct_return) Save |
| Return all structures in memory (AIX default). |
| |
| msvr4-struct-return |
| Target Report RejectNegative Var(aix_struct_return,0) Save |
| Return small structures in registers (SVR4 default). |
| |
| mxl-compat |
| Target Report Var(TARGET_XL_COMPAT) Save |
| Conform more closely to IBM XLC semantics. |
| |
| mrecip |
| Target Report |
| Generate software reciprocal divide and square root for better throughput. |
| |
| mrecip= |
| Target Report RejectNegative Joined Var(rs6000_recip_name) |
| Generate software reciprocal divide and square root for better throughput. |
| |
| mrecip-precision |
| Target Report Mask(RECIP_PRECISION) Var(rs6000_isa_flags) |
| Assume that the reciprocal estimate instructions provide more accuracy. |
| |
| mno-fp-in-toc |
| Target Report RejectNegative Var(TARGET_NO_FP_IN_TOC) Save |
| Do not place floating point constants in TOC. |
| |
| mfp-in-toc |
| Target Report RejectNegative Var(TARGET_NO_FP_IN_TOC,0) Save |
| Place floating point constants in TOC. |
| |
| mno-sum-in-toc |
| Target RejectNegative Var(TARGET_NO_SUM_IN_TOC) Save |
| Do not place symbol+offset constants in TOC. |
| |
| msum-in-toc |
| Target RejectNegative Var(TARGET_NO_SUM_IN_TOC,0) Save |
| Place symbol+offset constants in TOC. |
| |
| ; Output only one TOC entry per module. Normally linking fails if |
| ; there are more than 16K unique variables/constants in an executable. With |
| ; this option, linking fails only if there are more than 16K modules, or |
| ; if there are more than 16K unique variables/constant in a single module. |
| ; |
| ; This is at the cost of having 2 extra loads and one extra store per |
| ; function, and one less allocable register. |
| mminimal-toc |
| Target Report Mask(MINIMAL_TOC) Var(rs6000_isa_flags) |
| Use only one TOC entry per procedure. |
| |
| mfull-toc |
| Target Report |
| Put everything in the regular TOC. |
| |
| mvrsave |
| Target Report Var(TARGET_ALTIVEC_VRSAVE) Save |
| Generate VRSAVE instructions when generating AltiVec code. |
| |
| mvrsave=no |
| Target RejectNegative Alias(mvrsave) NegativeAlias Warn(%<-mvrsave=no%> is deprecated; use %<-mno-vrsave%> instead) |
| Deprecated option. Use -mno-vrsave instead. |
| |
| mvrsave=yes |
| Target RejectNegative Alias(mvrsave) Warn(%<-mvrsave=yes%> is deprecated; use %<-mvrsave%> instead) |
| Deprecated option. Use -mvrsave instead. |
| |
| mblock-move-inline-limit= |
| Target Report Var(rs6000_block_move_inline_limit) Init(0) RejectNegative Joined UInteger Save |
| Max number of bytes to move inline. |
| |
| mblock-compare-inline-limit= |
| Target Report Var(rs6000_block_compare_inline_limit) Init(31) RejectNegative Joined UInteger Save |
| Max number of bytes to compare without loops. |
| |
| mblock-compare-inline-loop-limit= |
| Target Report Var(rs6000_block_compare_inline_loop_limit) Init(-1) RejectNegative Joined UInteger Save |
| Max number of bytes to compare with loops. |
| |
| mstring-compare-inline-limit= |
| Target Report Var(rs6000_string_compare_inline_limit) Init(8) RejectNegative Joined UInteger Save |
| Max number of pairs of load insns for compare. |
| |
| misel |
| Target Report Mask(ISEL) Var(rs6000_isa_flags) |
| Generate isel instructions. |
| |
| misel=no |
| Target RejectNegative Alias(misel) NegativeAlias Warn(%<-misel=no%> is deprecated; use %<-mno-isel%> instead) |
| Deprecated option. Use -mno-isel instead. |
| |
| misel=yes |
| Target RejectNegative Alias(misel) Warn(%<-misel=yes%> is deprecated; use %<-misel%> instead) |
| Deprecated option. Use -misel instead. |
| |
| mpaired |
| Target Var(rs6000_paired_float) Save |
| Generate PPC750CL paired-single instructions. |
| |
| mdebug= |
| Target RejectNegative Joined |
| -mdebug= Enable debug output. |
| |
| mabi=altivec |
| Target RejectNegative Var(rs6000_altivec_abi) Save |
| Use the AltiVec ABI extensions. |
| |
| mabi=no-altivec |
| Target RejectNegative Var(rs6000_altivec_abi, 0) |
| Do not use the AltiVec ABI extensions. |
| |
| mabi=elfv1 |
| Target RejectNegative Var(rs6000_elf_abi, 1) Save |
| Use the ELFv1 ABI. |
| |
| mabi=elfv2 |
| Target RejectNegative Var(rs6000_elf_abi, 2) |
| Use the ELFv2 ABI. |
| |
| ; These are here for testing during development only, do not document |
| ; in the manual please. |
| |
| ; If we want Darwin's struct-by-value-in-regs ABI. |
| mabi=d64 |
| Target RejectNegative Undocumented Warn(using darwin64 ABI) Var(rs6000_darwin64_abi) Save |
| |
| mabi=d32 |
| Target RejectNegative Undocumented Warn(using old darwin ABI) Var(rs6000_darwin64_abi, 0) |
| |
| mabi=ieeelongdouble |
| Target RejectNegative Var(rs6000_ieeequad) Save |
| |
| mabi=ibmlongdouble |
| Target RejectNegative Var(rs6000_ieeequad, 0) |
| |
| mcpu= |
| Target RejectNegative Joined Var(rs6000_cpu_index) Init(-1) Enum(rs6000_cpu_opt_value) Save |
| -mcpu= Use features of and schedule code for given CPU. |
| |
| mtune= |
| Target RejectNegative Joined Var(rs6000_tune_index) Init(-1) Enum(rs6000_cpu_opt_value) Save |
| -mtune= Schedule code for given CPU. |
| |
| mtraceback= |
| Target RejectNegative Joined Enum(rs6000_traceback_type) Var(rs6000_traceback) |
| -mtraceback=[full,part,no] Select type of traceback table. |
| |
| Enum |
| Name(rs6000_traceback_type) Type(enum rs6000_traceback_type) |
| |
| EnumValue |
| Enum(rs6000_traceback_type) String(full) Value(traceback_full) |
| |
| EnumValue |
| Enum(rs6000_traceback_type) String(part) Value(traceback_part) |
| |
| EnumValue |
| Enum(rs6000_traceback_type) String(no) Value(traceback_none) |
| |
| mlongcall |
| Target Report Var(rs6000_default_long_calls) Save |
| Avoid all range limits on call instructions. |
| |
| ; This option existed in the past, but now is always on. |
| mgen-cell-microcode |
| Target RejectNegative Undocumented Ignore |
| |
| mwarn-altivec-long |
| Target Var(rs6000_warn_altivec_long) Init(1) Save |
| Warn about deprecated 'vector long ...' AltiVec type usage. |
| |
| mlong-double- |
| Target RejectNegative Joined UInteger Var(rs6000_long_double_type_size) Save |
| -mlong-double-[64,128] Specify size of long double. |
| |
| ; This option existed in the past, but now is always on. |
| mlra |
| Target RejectNegative Undocumented Ignore |
| |
| msched-costly-dep= |
| Target RejectNegative Joined Var(rs6000_sched_costly_dep_str) |
| Determine which dependences between insns are considered costly. |
| |
| minsert-sched-nops= |
| Target RejectNegative Joined Var(rs6000_sched_insert_nops_str) |
| Specify which post scheduling nop insertion scheme to apply. |
| |
| malign- |
| Target RejectNegative Joined Enum(rs6000_alignment_flags) Var(rs6000_alignment_flags) |
| Specify alignment of structure fields default/natural. |
| |
| Enum |
| Name(rs6000_alignment_flags) Type(unsigned char) |
| Valid arguments to -malign-: |
| |
| EnumValue |
| Enum(rs6000_alignment_flags) String(power) Value(MASK_ALIGN_POWER) |
| |
| EnumValue |
| Enum(rs6000_alignment_flags) String(natural) Value(MASK_ALIGN_NATURAL) |
| |
| mprioritize-restricted-insns= |
| Target RejectNegative Joined UInteger Var(rs6000_sched_restricted_insns_priority) Save |
| Specify scheduling priority for dispatch slot restricted insns. |
| |
| msingle-float |
| Target RejectNegative Var(rs6000_single_float) Save |
| Single-precision floating point unit. |
| |
| mdouble-float |
| Target RejectNegative Var(rs6000_double_float) Save |
| Double-precision floating point unit. |
| |
| msimple-fpu |
| Target RejectNegative Var(rs6000_simple_fpu) Save |
| Floating point unit does not support divide & sqrt. |
| |
| mfpu= |
| Target RejectNegative Joined Enum(fpu_type_t) Var(rs6000_fpu_type) Init(FPU_NONE) |
| -mfpu= Specify FP (sp, dp, sp-lite, dp-lite) (implies -mxilinx-fpu). |
| |
| Enum |
| Name(fpu_type_t) Type(enum fpu_type_t) |
| |
| EnumValue |
| Enum(fpu_type_t) String(none) Value(FPU_NONE) |
| |
| EnumValue |
| Enum(fpu_type_t) String(sp_lite) Value(FPU_SF_LITE) |
| |
| EnumValue |
| Enum(fpu_type_t) String(dp_lite) Value(FPU_DF_LITE) |
| |
| EnumValue |
| Enum(fpu_type_t) String(sp_full) Value(FPU_SF_FULL) |
| |
| EnumValue |
| Enum(fpu_type_t) String(dp_full) Value(FPU_DF_FULL) |
| |
| mxilinx-fpu |
| Target Var(rs6000_xilinx_fpu) Save |
| Specify Xilinx FPU. |
| |
| mpointers-to-nested-functions |
| Target Report Var(TARGET_POINTERS_TO_NESTED_FUNCTIONS) Init(1) Save |
| Use r11 to hold the static link in calls to functions via pointers. |
| |
| msave-toc-indirect |
| Target Report Mask(SAVE_TOC_INDIRECT) Var(rs6000_isa_flags) |
| Save the TOC in the prologue for indirect calls rather than inline. |
| |
| ; This option existed in the past, but now is always the same as -mvsx. |
| mvsx-timode |
| Target RejectNegative Undocumented Ignore |
| |
| mpower8-fusion |
| Target Report Mask(P8_FUSION) Var(rs6000_isa_flags) |
| Fuse certain integer operations together for better performance on power8. |
| |
| mpower8-fusion-sign |
| Target Undocumented Mask(P8_FUSION_SIGN) Var(rs6000_isa_flags) |
| Allow sign extension in fusion operations. |
| |
| mpower8-vector |
| Target Report Mask(P8_VECTOR) Var(rs6000_isa_flags) |
| Use vector and scalar instructions added in ISA 2.07. |
| |
| mcrypto |
| Target Report Mask(CRYPTO) Var(rs6000_isa_flags) |
| Use ISA 2.07 Category:Vector.AES and Category:Vector.SHA2 instructions. |
| |
| mdirect-move |
| Target Undocumented Mask(DIRECT_MOVE) Var(rs6000_isa_flags) Ignore Warn(%qs is deprecated) |
| |
| mhtm |
| Target Report Mask(HTM) Var(rs6000_isa_flags) |
| Use ISA 2.07 transactional memory (HTM) instructions. |
| |
| mquad-memory |
| Target Report Mask(QUAD_MEMORY) Var(rs6000_isa_flags) |
| Generate the quad word memory instructions (lq/stq). |
| |
| mquad-memory-atomic |
| Target Report Mask(QUAD_MEMORY_ATOMIC) Var(rs6000_isa_flags) |
| Generate the quad word memory atomic instructions (lqarx/stqcx). |
| |
| mcompat-align-parm |
| Target Report Var(rs6000_compat_align_parm) Init(0) Save |
| Generate aggregate parameter passing code with at most 64-bit alignment. |
| |
| moptimize-swaps |
| Target Undocumented Var(rs6000_optimize_swaps) Init(1) Save |
| Analyze and remove doubleword swaps from VSX computations. |
| |
| mpower9-fusion |
| Target Undocumented Report Mask(P9_FUSION) Var(rs6000_isa_flags) |
| Fuse certain operations together for better performance on power9. |
| |
| mpower9-misc |
| Target Undocumented Report Mask(P9_MISC) Var(rs6000_isa_flags) |
| Use certain scalar instructions added in ISA 3.0. |
| |
| mpower9-vector |
| Target Undocumented Report Mask(P9_VECTOR) Var(rs6000_isa_flags) |
| Use vector instructions added in ISA 3.0. |
| |
| mpower9-minmax |
| Target Undocumented Mask(P9_MINMAX) Var(rs6000_isa_flags) |
| Use the new min/max instructions defined in ISA 3.0. |
| |
| mtoc-fusion |
| Target Undocumented Mask(TOC_FUSION) Var(rs6000_isa_flags) |
| Fuse medium/large code model toc references with the memory instruction. |
| |
| mmodulo |
| Target Undocumented Report Mask(MODULO) Var(rs6000_isa_flags) |
| Generate the integer modulo instructions. |
| |
| mfloat128 |
| Target Report Mask(FLOAT128_KEYWORD) Var(rs6000_isa_flags) |
| Enable IEEE 128-bit floating point via the __float128 keyword. |
| |
| mfloat128-hardware |
| Target Report Mask(FLOAT128_HW) Var(rs6000_isa_flags) |
| Enable using IEEE 128-bit floating point instructions. |
| |
| mfloat128-convert |
| Target Undocumented Mask(FLOAT128_CVT) Var(rs6000_isa_flags) |
| Enable default conversions between __float128 & long double. |
| |
| mstack-protector-guard= |
| Target RejectNegative Joined Enum(stack_protector_guard) Var(rs6000_stack_protector_guard) Init(SSP_TLS) |
| Use given stack-protector guard. |
| |
| Enum |
| Name(stack_protector_guard) Type(enum stack_protector_guard) |
| Valid arguments to -mstack-protector-guard=: |
| |
| EnumValue |
| Enum(stack_protector_guard) String(tls) Value(SSP_TLS) |
| |
| EnumValue |
| Enum(stack_protector_guard) String(global) Value(SSP_GLOBAL) |
| |
| mstack-protector-guard-reg= |
| Target RejectNegative Joined Var(rs6000_stack_protector_guard_reg_str) |
| Use the given base register for addressing the stack-protector guard. |
| |
| TargetVariable |
| int rs6000_stack_protector_guard_reg = 0 |
| |
| mstack-protector-guard-offset= |
| Target RejectNegative Joined Integer Var(rs6000_stack_protector_guard_offset_str) |
| Use the given offset for addressing the stack-protector guard. |
| |
| TargetVariable |
| long rs6000_stack_protector_guard_offset = 0 |
| |
| ;; -mno-speculate-indirect-jumps adds deliberate misprediction to indirect |
| ;; branches via the CTR. |
| mspeculate-indirect-jumps |
| Target Undocumented Var(rs6000_speculate_indirect_jumps) Init(1) Save |
