| 2003-12-31 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (generate_makefile): Update misleading comment. |
| |
| * automake.in (handle_languages): Define %DEPBASE% conditionally |
| on subdir-objects. Define SUBDIROBJ. Do not clean *_.c files |
| here ... |
| (lang_c_finish): ... do it here. |
| (handle_single_transform_list): Do not output specific rules for |
| subdir-objects files which are not renamed. This should reduce |
| the size of Makefiles with lots of subdirectory sources. |
| * lib/depcomp: Simplify computation of dependency output, and use |
| DEPDIR. |
| * lib/am/depend2.am (%EXT%.o, %EXT%.obj, %EXT%.lo): Adjust call |
| to depcomp. Compute depbase on-the-fly in generic fastdep rules |
| for subdir-objects. |
| * tests/ansi9.test: Do not grep for an explicit rule that |
| we no longer expect. Really run $MAKE to make sure the chain |
| of rules works. |
| * tests/yacc5.test: Do not grep for an explicit rule that |
| we no longer expect. Adjust to use set -e. |
| |
| 2003-12-27 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (@common_files): Move configure, configure.ac, and |
| configure.in ... |
| (@common_sometimes): ... here so that these files do not appear |
| twice in DIST_COMMON. |
| |
| * automake.in (maybe_push_required_file): Add $(srcdir) in front |
| a required files outside the current directory or its subdirectories. |
| * lib/am/distdir.am (distdir): Update comment. |
| Report from Nicolas Joly. |
| |
| 2003-12-26 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * doc/automake.texi (@copying): Do not repeat the version. |
| (Top): Use @insertcopying. Add a @detailmenu, this works around |
| Emacs 21's inability to lookup indices in sub-nodes (reported |
| by Kevin Ryde). |
| (C++ Support, Assembly Support, Fortran 77 Support, Java Support, |
| Support for Other Languages, Preprocessing Fortran 77, Compiling |
| Fortran 77 Files, Mixing Fortran 77 With C and C++, How the Linker |
| is Chosen): Add missing descriptions in menus. |
| (Fortran 77 and Autoconf): Remove, this node was just saying "use |
| Autoconf 2.53 or greater". |
| |
| 2003-12-26 Santiago Vila <sanvila@unex.es> (tiny change) |
| |
| * NEWS: s/Gettext 1.12.1/Gettext 0.12.1/ |
| |
| 2003-12-25 Nicolas Joly <njoly@pasteur.fr> (tiny change) |
| |
| * doc/automake.texi (Conditional Sources): Typo. |
| |
| 2003-12-25 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Config.in: Require Exporter. |
| Report from Kevin Ryde (failure with Perl 5.005_03). |
| |
| 2003-12-15 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/aclocal6.test: Check for autom4te.cache only if it has |
| been created. |
| * tests/maintclean.test: Update comment. |
| Report from Bruno Haible. |
| |
| * tests/txinfo24.test, tests/txinfo25.test, tests/txinfo28.test: |
| Require texi2dvi-o. |
| Report from Václav Haisman. |
| |
| 2003-12-10 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * configure.ac, NEWS: Bump version to 1.8a. |
| |
| * configure.ac, NEWS: Bump version to 1.8. |
| |
| * lib/texinfo.tex: New upstream version. |
| |
| * Makefile.am (INSTALL): Copy the source from $(srcdir). |
| |
| 2003-12-09 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Rule.pm (define): Remove debugging traces. |
| Report from Akim Demaille. |
| |
| 2003-12-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> (tiny change) |
| Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * Makefile.am (do_subst): Fix the substitution of @configure_input@. |
| (automake, aclocal): Create the output atomically and make it |
| read-only, as done in the Autoconf package. |
| * lib/Automake/Makefile.am (do_subst): Fix the substitution of |
| @configure_input@. |
| (Config.pm): Create the output atomically and make it read-only. |
| * m4/Makefile.am ($(top_srcdir)/m4/amversion.m4): Substitute |
| @configure_input@ and make the output read-only. |
| * lib/Automake/Config.in, m4/amversion.in, tests/aclocal.in, |
| tests/automake.in, tests/defs.in: Add a @configure_input@ line. |
| |
| 2003-12-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> (tiny change) |
| |
| * doc/automake.texi (Local Macros, CVS): Typos. |
| |
| 2003-12-08 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm (hook): Use $$ as prototype, not $\&. |
| Perl 5.6.0 will not accept a reference sub reference for the |
| latter. |
| * automake.in (var_SUFFIXES_trigger): Adjust registration via |
| Automake::Variable::hook. |
| (handle_texinfo_helper): Make sure `inner_expand => 1' appears |
| on one line, so that Perl 5.6.0 does not complain about |
| inner_expand being a bare identifier. |
| |
| 2003-12-05 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * aclocal.in (check_acinclude, scan_file): Output `warning:' in |
| front of warnings. |
| Report from Pavel Roskin. |
| |
| 2003-12-04 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * TODO: Remove some old entries. |
| |
| * doc/automake.texi (Rebuilding): Document CONFIGURE_DEPENDENCIES |
| and CONFIG_STATUS_DEPENDENCIES. Move this sections later |
| in the manual since it's pretty advanced material. |
| |
| * automake.in ($config_header_location): Remove. Use |
| %ac_config_files_location instead. |
| (rewrite_inputs_into_dependencies): Do not prepend $(top_builddir)/ |
| at the top-level. |
| (handle_configure): Use rewrite_inputs_into_dependencies to |
| distribute and compute AC_CONFIG_HEADERS dependencies. |
| (scan_autoconf_traces) <AC_CONFIG_HEADERS>: Fill |
| %ac_config_files_location. |
| * lib/am/remake-hdr.am ($(srcdir)/%CONFIG_HIN%): Rename as ... |
| (%CONFIG_HIN%): ... this. $(srcdir) is already added in |
| scan_autoconf_traces. |
| * tests/Makefile.am (TESTS): Add confh5.test. |
| * tests/confh5.test: New file. |
| |
| * tests/ltlibsrc.test: Fix the zoo_d_old2_la.c rule in Makefile.am, |
| $< is not portable and the source is in $(srcdir). |
| |
| 2003-12-03 Paolo Bonzini <bonzini@gnu.org> |
| Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_configure): Do not require link sources if |
| they contain a dollar, or if they were built. Likewise, do not |
| clean link destination if they contain a dollar. |
| (scan_autoconf_traces) <AC_CONFIG_LINKS>: Populate |
| %ac_config_files_location with link destinations. Do not |
| store locations in @config_links, now that %ac_config_files_location |
| have them. |
| * tests/conflnk3.test: New file. |
| * tests/Makefile.am (TESTS): Add conflnk3.test. |
| |
| 2003-12-02 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * configure.ac, NEWS: Bump version to 1.7i. |
| |
| * configure.ac, NEWS: Bump version to 1.7h. |
| |
| * doc/automake.texi (Default _SOURCES): Fix reference to true. |
| |
| * lib/texinfo.tex: New upstream version. |
| |
| 2003-11-30 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_source_transform): If it's present, use |
| libfoo_la.c instead of libfoo.c as the default source of |
| libfoo.la, and issue an -Wobsolete diagnostic. Do not be |
| greedy in the suffix replacement regex. |
| * doc/automake.texi (Default _SOURCES): New node. |
| (Program Sources, Libtool Modules): Refer to it. |
| * tests/ltlibsrc.test: Update to check for old default source files. |
| |
| 2003-11-30 Gary V. Vaughan <gary@gnu.org> |
| |
| * automake.in (&handle_source_transform): Calculate a default file |
| for use in the absence of an appropriate _SOURCES declaration by |
| first stripping any suffix from the unxformed target name, and |
| appending `.c'. |
| * doc/automake.texi (Program Sources, Libtool Modules): Document this. |
| * tests/ltlibsrc.test: New file. |
| * tests/Makefile.am (TESTS): Add ltlibsrc.test. |
| |
| 2003-11-29 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm (loc_and_value_as_list_recursive, |
| _value_as_list_recursive_worker): Merge into ... |
| (value_as_list_recursive): ... this function. Pass options |
| as a hash argument, and use the `location' option to trigger |
| the behavior of loc_and_value_as_list_recursive. |
| (traverse_recursively, transform_variable_recursively): Take |
| options as a %options argument. |
| (_do_recursive_traversal): Perform expansion of inner variables |
| (as in `$(FILE).ext') on request. |
| * automake.in (handle_options, check_libobjs_sources) |
| (handle_source_transform, handle_LIBOBJS, handle_ltlibraries) |
| (handle_ltlibraries, handle_man_pages, handle_dist) |
| (handle_gettext, am_install_var): Adjust usage of |
| value_as_list_recursive. |
| (handle_texinfo_helper): Pass inner_expand to |
| value_as_list_recursive. |
| * tests/txinfo28.test: New file. |
| * tests/Makefile.am (TESTS): Add txinfo28.test. |
| Report from Ralf Corsepius. |
| |
| * lib/Automake/Variable.pm (_do_recursive_traversal): Do not |
| update @_substfroms and @_substfroms for undefined variables. |
| * tests/substre2.test: New file. |
| * tests/Makefile.am (TESTS): Add substre2.test. |
| |
| * lib/Automake/VarDef.pm (value): Rename as ... |
| (raw_value): ... this. |
| (value): New method, strip # and \\\n. |
| (dump): Use raw_value. |
| * lib/Automake/Variable.pm (output): Use raw_value. |
| (value_as_list): Simplify, now that backslash and comments |
| are already removed. |
| * tests/txinfo22.test: Make sure Automake isn't confused |
| by comments in variables. |
| |
| 2003-11-27 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * doc/automake.texi: More target vs. rule editing. Back out some |
| of the previous changes. It's OK to talk about targets as "entry |
| points", or as thing to build, but targets cannot be run: rules |
| are run. |
| |
| * doc/automake.texi: s/target/rule/ where appropriate. A target |
| is the destination of a target rule, not the rule itself. |
| Suggested by Bruno Haible. |
| |
| 2003-11-25 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * configure.ac, NEWS: Bump version to 1.7g. |
| |
| * configure.ac, NEWS: Bump version to 1.7f. |
| |
| * automake.in (prepend_srcdir): Parenthesize @inputs to remove |
| a maintainer-check warning. |
| * tests/subst2.test: Rewrite the $MAKE invocation to please |
| maintainer-check. |
| |
| * lib/config.sub, lib/config.guess, lib/texinfo.tex: New upstream |
| versions. |
| |
| * doc/automake.texi (Program variables): Mention per-target |
| _CPPFLAGS in the documentation of INCLUDES. |
| * automake.in (generate_makefile): Likewise in the INCLUDES diagnostic. |
| Report from Bob Friesenhahn. |
| |
| * doc/automake.texi (Extending): Elaborate on overriding. |
| * NEWS: Likewise. |
| Suggested by Bruno Haible. |
| |
| 2003-11-24 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm (output): Add $(am__empty) to variable |
| definitions that end with a line full of @substitutions@ that |
| would confuse HP-UX Make if it were blank. |
| (transform_variable_recursively): Make sure not to erase empty |
| variables. |
| * tests/Makefile.am (TESTS): Add subst2.test. |
| * tests/subst2.test: New file. |
| Report from Harlan Stenn. |
| |
| * lib/am/texibuild.am (%SOURCE_SUFFIX%.html): Work around a |
| Texinfo 4.1 bug. |
| Report from Dalibor Topic. |
| |
| 2003-11-22 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Fix for PR automake/411: |
| * automake.in (rewrite_inputs_into_dependencies): Simplify, and rename |
| into ... |
| (prepend_srcdir): ... this. |
| (rewrite_inputs_into_dependencies): New function, extracted from ... |
| (handle_configure): ... here. Adjust to use prepend_srcdir |
| or rewrite_inputs_into_dependencies where needed. Especially, |
| using (the new) rewrite_inputs_into_dependencies to compute |
| Makefile dependencies will fix PR/411. |
| * lib/am/configure.am (DIST_COMMON): Remove %MAKEFILE-IN%, it's |
| already distributed by rewrite_inputs_into_dependencies. |
| * tests/Makefile.am (TESTS): Add output10.test, remove distcom.test. |
| * tests/colon3.test: Use set -e. Don't allow any AUTOMAKE |
| invocation refer to zardoz. Make sure two.in and three.in |
| appear as $(srcdir)/two.in and $(srcdir)/three.in dependencies. |
| * tests/distcom.test: Delete. This is covered by tests/output9.test. |
| * tests/output10.test: New file, for PR/411. |
| |
| 2003-11-21 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (append_exeext): Do not append $(EXEEXT) to |
| @substitutions@. |
| * tests/exeext4.test: New file. |
| * tests/Makefile.am (TESTS): Add exeext4.test. |
| |
| 2003-11-19 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/configure.am (%MAKEFILE%): Remove %MAINTAINER-MODE%, |
| mistakenly added on 2001-03-05. |
| * tests/remake5.test: New file. |
| * tests/Makefile.am (TESTS): Add remake5.test. |
| Report from Ralf Corsepius. |
| |
| 2003-11-18 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * configure.ac, NEWS: Bump version to 1.7e. |
| |
| * configure.ac, NEWS: Bump version to 1.7d. |
| |
| * lib/config.sub, lib/config.guess, lib/texinfo.tex: New |
| upstream versions. |
| |
| 2003-11-18 Maciej W. Rozycki <macro@ds2.pg.gda.pl> (tiny change) |
| Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/texinfos.am (install-info): Depend on |
| install-info-recursive or install-info-am even if no-installinfo. |
| * tests/txinfo27.test: New file. |
| * tests/Makefile.am (TESTS): Add txinfo26.test. |
| |
| 2003-11-18 Paolo Bonzini <bonzini@gnu.org> |
| Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/ylwrap: Do not overwrite headers if they haven't changed. |
| Fix the include guard substitution. |
| * tests/yacc6.test: Augment to run ylwrap, and make sure it |
| does not needlessly update headers. |
| * tests/yacc8.test: Make sure headers are not needlessly updated |
| with ylwrap is not used. Move `test -f foo.o' into the |
| Makefile as `test -f foo.$(OBJEXT)' for portability. |
| |
| 2003-11-17 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (generate_makefile): Define SUBDIRS if it is |
| not defined and DIST_SUBDIRS is. |
| * tests/subpkg2.test: New file. |
| * tests/Makefile.am (TESTS): Add subpkg2.test. |
| Report from Gary V. Vaughan. |
| |
| * tests/suffix11.test: Check for suffixes containing `-'. |
| * lib/Automake/Rule.pm ($_SUFFIX_RULE_PATTERN): Accept `-' in |
| suffixes. |
| |
| * lib/Automake/Rule.pm (define): Suggest using target-local instead |
| of target-am, not target-am-local. |
| * tests/overrid.test: Check the diagnostic for clean-am. |
| Report from Bruno Haible. |
| |
| 2003-11-17 Jim Meyering <jim@meyering.net> |
| |
| * bootstrap: Require not only that `perl' have the executable |
| bit set, but also that it is not a directory. |
| |
| * lib/am/configure.am: Mark %MAKEFILE% as `.PRECIOUS'. |
| |
| 2003-11-17 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (ac_config_files_location): Declare as a hash. |
| (handle_configure): Rewrite the computation of AC_CONFIG_FILES |
| dependencies; make sure we don't use $(srcdir) or $(top_srcdir) |
| for inputs which are also outputs, and do not check inputs |
| relatively to the current directory. |
| (scan_autoconf_config_files): Take $where as argument, and |
| fill $ac_config_files_location. |
| * tests/output8.test, tests/output9.test: New files. |
| * tests/Makefile.am (TESTS): Add output8.test and output9.test. |
| Report from Bruno Haible. |
| |
| 2003-11-14 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/aclibobj.test, tests/aclocal.test, tests/aclocal3.test, |
| tests/acoutbs.test, tests/acoutbs2.test, tests/acoutnoq.test, |
| tests/acoutpt.test, tests/acoutpt2.test, tests/acoutqnl.test, |
| tests/acsilent.test, tests/acsubst.test, tests/acsubst2.test, |
| tests/all.test, tests/alpha.test, tests/amassign.test, |
| tests/ammissing.test, tests/ansi.test, tests/ansi10.test, |
| tests/ansi2.test, tests/ansi3.test, tests/ansi3b.test, |
| tests/ansi4.test, tests/ansi5.test, tests/ansi6.test, |
| tests/ansi7.test, tests/ansi9.test, tests/ar.test, |
| tests/autohdr.test, tests/autohdr2.test, tests/auxdir.test, |
| tests/auxdir2.test, tests/backsl.test, tests/backsl2.test, |
| tests/badprog.test, tests/block.test, tests/canon2.test, |
| tests/canon3.test, tests/canon4.test, tests/canon5.test, |
| tests/ccnoco.test, tests/check.test, tests/check2.test, |
| tests/check3.test, tests/checkall.test, tests/clean.test, |
| tests/colneq2.test, tests/colon.test, tests/colon2.test, |
| tests/colon3.test, tests/colon4.test, tests/colon5.test, |
| tests/colon6.test, tests/colon7.test, tests/comment.test, |
| tests/comment2.test, tests/comment4.test, tests/comment6.test, |
| tests/comment7.test, tests/compile_f_c_cxx.test, tests/cond.test, |
| tests/cond10.test, tests/cond11.test, tests/cond13.test, |
| tests/cond14.test, tests/cond15.test, tests/cond16.test, |
| tests/cond17.test, tests/cond18.test, tests/cond19.test, |
| tests/cond21.test, tests/cond22.test, tests/cond25.test, |
| tests/cond26.test, tests/cond28.test, tests/cond3.test, |
| tests/cond4.test, tests/cond5.test, tests/cond6.test, |
| tests/cond7.test, tests/cond8.test, tests/cond9.test, |
| tests/condd.test, tests/condinc.test, tests/condlib.test, |
| tests/condman.test, tests/condman2.test, tests/conf2.test, |
| tests/confdeps.test, tests/confh.test, tests/confh4.test, |
| tests/config.test, tests/confincl.test, tests/conflnk.test, |
| tests/conflnk2.test, tests/confsub.test, tests/confvar.test, |
| tests/confvar2.test, tests/copy.test, tests/ctarget1.test, |
| tests/cxx.test, tests/cxxansi.test, tests/cxxcpp.test, |
| tests/cxxlibobj.test, tests/cxxlink.test, tests/cxxnoc.test, |
| tests/cxxo.test, tests/cygwin32.test, tests/dash.test, |
| tests/defun.test, tests/defun2.test, tests/dejagnu.test, |
| tests/dejagnu3.test, tests/dejagnu4.test, tests/dejagnu5.test, |
| tests/dejagnu6.test, tests/dejagnu7.test, tests/depacl2.test, |
| tests/depcomp.test, tests/depcomp2.test, tests/depcomp4.test, |
| tests/depdist.test, tests/depend.test, tests/depend2.test, |
| tests/depend3.test, tests/depend4.test, tests/destdir.test, |
| tests/dirlist.test, tests/discover.test, tests/distcom.test, |
| tests/distcom2.test, tests/distdir.test, tests/distname.test, |
| tests/dollar.test, tests/double.test, tests/dup2.test, |
| tests/empty.test, tests/empty2.test, tests/empty3.test, |
| tests/empty4.test, tests/error.test, tests/exdir.test, |
| tests/exeext.test, tests/exeext3.test, tests/exsource.test, |
| tests/ext.test, tests/ext2.test, tests/extra.test, |
| tests/extra2.test, tests/extra3.test, tests/extra4.test, |
| tests/extra5.test, tests/extra6.test, tests/extra7.test, |
| tests/flibs.test, tests/fnoc.test, tests/fo.test, |
| tests/fonly.test, tests/fortdep.test, tests/fpinst2.test, |
| tests/fpinstall.test, tests/gcj.test, tests/gcj3.test, |
| tests/gcj4.test, tests/gnits2.test, tests/gnits3.test, |
| tests/header.test, tests/implicit.test, tests/include.test, |
| tests/include2.test, tests/info.test, tests/insh2.test, |
| tests/install2.test, tests/installdir.test, tests/instdat.test, |
| tests/instdat2.test, tests/instexec.test, tests/insthook.test, |
| tests/instman.test, tests/instman2.test, tests/instsh.test, |
| tests/instsh2.test, tests/interp.test, tests/interp2.test, |
| tests/java.test, tests/java2.test, tests/javaprim.test, |
| tests/javasubst.test, tests/ldadd.test, tests/ldflags.test, |
| tests/lex.test, tests/lex3.test, tests/lex4.test, tests/lex5.test, |
| tests/libobj11.test, tests/libobj2.test, tests/libobj4.test, |
| tests/libobj5.test, tests/libobj7.test, tests/libobj8.test, |
| tests/library.test, tests/libtool.test, tests/libtool2.test, |
| tests/libtool3.test, tests/libtool5.test, tests/link_c_cxx.test, |
| tests/link_dist.test, tests/link_f_only.test, tests/link_fc.test, |
| tests/link_fccxx.test, tests/link_fcxx.test, tests/lisp.test, |
| tests/listval.test, tests/ltdeps.test, tests/ltlibobjs.test, |
| tests/maintclean.test, tests/make.test, tests/makej.test, |
| tests/makevars.test, tests/man.test, tests/man2.test, |
| tests/mclean.test, tests/mdate.test, tests/mdate2.test, |
| tests/mdate3.test, tests/mdate4.test, tests/mkinst2.test, |
| tests/mkinstall.test, tests/nobase.test, tests/nodef.test, |
| tests/nodef2.test, tests/nodep.test, tests/nodepcomp.test, |
| tests/nodist.test, tests/nodist2.test, tests/nodist3.test, |
| tests/noinst.test, tests/noinstdir.test, tests/nolink.test, |
| tests/nostdinc.test, tests/number.test, tests/obsolete.test, |
| tests/order.test, tests/outdir.test, tests/output.test, |
| tests/output2.test, tests/output3.test, tests/output4.test, |
| tests/parse.test, tests/phony.test, tests/pluseq.test, |
| tests/pluseq10.test, tests/pluseq2.test, tests/pluseq3.test, |
| tests/pluseq4.test, tests/pluseq6.test, tests/pluseq8.test, |
| tests/postproc.test, tests/ppf77.test, tests/pr2.test, |
| tests/pr204.test, tests/pr220.test, tests/pr224.test, |
| tests/pr229.test, tests/pr243.test, tests/pr266.test, |
| tests/pr279-2.test, tests/pr279.test, tests/pr287.test, |
| tests/pr300-lib.test, tests/pr300-ltlib.test, |
| tests/pr300-prog.test, tests/pr307.test, tests/pr72.test, |
| tests/pr87.test, tests/pr9.test, tests/prefix.test, |
| tests/proginst.test, tests/python.test, tests/python3.test, |
| tests/python4.test, tests/python5.test, tests/python6.test, |
| tests/python7.test, tests/python8.test, tests/python9.test, |
| tests/recurs2.test, tests/remake.test, tests/remake2.test, |
| tests/remake3.test, tests/req.test, tests/reqd.test, |
| tests/rulepat.test, tests/scripts.test, tests/sinclude.test, |
| tests/space.test, tests/specflg3.test, tests/specflg6.test, |
| tests/specflg7.test, tests/specflg8.test, tests/specflg9.test, |
| tests/spell3.test, tests/spelling.test, tests/spy.test, |
| tests/stamph2.test, tests/stdlib2.test, tests/strip.test, |
| tests/subcond.test, tests/subcond2.test, tests/subcond3.test, |
| tests/subdir.test, tests/subdir2.test, tests/subdir3.test, |
| tests/subdir4.test, tests/subdir5.test, tests/subdir6.test, |
| tests/subdirbuiltsources.test, tests/subobj.test, |
| tests/subobj2.test, tests/subobj3.test, tests/subobj4.test, |
| tests/subobj5.test, tests/subobj6.test, tests/subobj7.test, |
| tests/subobj8.test, tests/subobj9.test, tests/subobjname.test, |
| tests/subpkg.test, tests/subst.test, tests/substref.test, |
| tests/suffix.test, tests/suffix10.test, tests/suffix2.test, |
| tests/suffix3.test, tests/suffix4.test, tests/suffix5.test, |
| tests/suffix6.test, tests/suffix7.test, tests/suffix8.test, |
| tests/suffix9.test, tests/symlink2.test, tests/symlink3.test, |
| tests/tags.test, tests/tagsub.test, tests/target-cflags.test, |
| tests/transform.test, tests/txinfo.test, tests/txinfo10.test, |
| tests/txinfo13.test, tests/txinfo16.test, tests/txinfo17.test, |
| tests/txinfo18.test, tests/txinfo2.test, tests/txinfo23.test, |
| tests/txinfo24.test, tests/txinfo25.test, tests/txinfo26.test, |
| tests/txinfo3.test, tests/txinfo5.test, tests/txinfo6.test, |
| tests/txinfo7.test, tests/txinfo8.test, tests/txinfo9.test, |
| tests/unused.test, tests/vars.test, tests/vars3.test, |
| tests/vartar.test, tests/version.test, tests/version2.test, |
| tests/version4.test, tests/version6.test, tests/version7.test, |
| tests/vpath.test, tests/vtexi.test, tests/vtexi2.test, |
| tests/werror.test, tests/whoami.test, tests/yacc.test, |
| tests/yacc3.test, tests/yacc4.test, tests/yacc5.test, |
| tests/yacc6.test, tests/yacc7.test, tests/yacc8.test, |
| tests/yaccpp.test, tests/yaccvpath.test: Fix license to refer |
| to Automake, not autoconf. |
| |
| Fix for PR automake/408: |
| * lib/am/texinfos.am (install-info-am): Strip any $(srcdir)/ prefix |
| from $file, as already done for dist-info. |
| * tests/Makefile.am (TESTS): Add txinfo26.test. |
| * tests/txinfo26.test: New file. |
| Report from Nicholas Wourms. |
| |
| 2003-11-13 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * m4/lispdir.m4 (AM_PATH_LISPDIR): If EMACS=t, empty it before |
| running AC_CHECK_PROGS(EMACS). |
| * lib/am/lisp.am (elc-stamp): Quote $(EMACS). |
| Report from Jens Petersen. |
| |
| * tests/mkinst2.test: Rewrite. |
| |
| * m4/mkdirp.m4: Do not require AM_AUX_DIR_EXPAND. |
| |
| 2003-11-12 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (scan_autoconf_traces): Honor sinclude. |
| * tests/sinclude.test: Check for sinclude. |
| Report from Roberto Bagnara. |
| |
| 2003-11-11 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * Makefile.am: Do not rerun `make dist' after tagging, `make distcheck' |
| already build the tarballs. Commit files right before tagging. |
| Check NEWS before running distcheck. |
| |
| * m4/amversion.in (AM_AUTOMAKE_VERSION): Missing cosmetic space. |
| |
| * configure.ac, NEWS: Bump version to 1.7c. |
| |
| * configure.ac, NEWS: Bump version to 1.7b. |
| * Makefile.am (maintainer-check): Ignore comments while |
| scanning for rm without -f. |
| |
| * Makefile.am (fetch): Get all files from savannah. Do not |
| postprocess Struct.pm and XFiles.pm, since we now are the master |
| of these. |
| * lib/config.sub, lib/config.guess, lib/config-ml.in, |
| lib/texinfo.tex: New upstream versions. |
| |
| * configure.ac: Check that autoconf is installed, that it works, |
| and that it is recent enough in three steps, not one. |
| |
| * NEWS: Minor edits. |
| |
| * lib/Makefile.am (dist_script_DATA): Move config-ml.in ... |
| (dist_pkgvdata_DATA): ... here. |
| |
| * tests/spy.test: Document overlapping ::-rules incompatibility, |
| and check only non-overlapping ::-rules. |
| |
| * doc/automake.texi (Texinfo): Define MAKEINFO, MAKEINFOHTML, |
| MAKEINFOFLAGS, AM_MAKEINFOFLAGS, AM_MAKEINFOHTMLFLAGS, TEXI2DVI, |
| TEXI2PDF, DVIPS, and TEXINFO_TEX in a table. |
| (Uniform): Do not speak of missing HTML support, this is |
| confusing. |
| * lib/Automake/Variable.pm (_silent_variable_override): Add |
| AM_MAKEINFOHTMLFLAGS. |
| * lib/am/texibuild.am (%SOURCE_SUFFIX%.html): Use MAKEINFOHTML and |
| AM_MAKEINFOHTMLFLAGS instead of MAKEINFO and AM_MAKEINFOFLAGS. |
| * lib/am/texinfos.am (MAKEINFOHTML, AM_MAKEINFOHTMLFLAGS): Define. |
| * tests/txinfo21.test: Add a test with AM_MAKEINFOHTMLFLAGS. |
| |
| 2003-11-10 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/spy.test: New file. |
| * tests/Makefile.am (TESTS): Add spy.test. |
| |
| * automake.in (handle_configure): Distribute and define mkinstalldirs |
| only if it is already present in the package. |
| (scan_autoconf_files): Do not require mkinstalldirs. |
| (require_build_directory): Use $(mkdir_p), not $(mkinstalldirs). |
| * lib/am/data.am, lib/am/distdir.am, lib/am/install.am, |
| lib/am/java.am, lib/am/libs.am, lib/am/lisp.am, lib/am/mans.am, |
| lib/am/progs.am, lib/am/python.am, lib/am/scripts.am, |
| lib/am/texinfos.am: Use $(mkdir_p) instead of $(mkinstalldirs). |
| * m4/mkdirp.m4: New file. |
| * m4/Makefile.am (dist_m4data_DATA): Add mkdirp.m4. |
| * m4/init.m4 (AM_INIT_AUTOMAKE): Call AM_PROG_MKDIR_P. |
| * tests/Makefile.am (TESTS): Remove insh.test. |
| * tests/insh.test: Delete. |
| * tests/defs.in, tests/instsh.test: Do not install mkinstalldirs. |
| * tests/auxdir.test: Install mkinstalldirs. |
| * tests/distdir.test, tests/instman.test, tests/pr2.test: Use |
| $(mkdir_p), not $(mkinstalldirs). |
| * tests/empty.test: Run configure, do not substitute things by hand. |
| * doc/automake.texi (Optional) <AC_CONFIG_FILES>: Take install-sh |
| as an example, not mkinstalldirs. |
| (Auxiliary Programs) <mkinstalldirs>: Update. |
| |
| * tests/defs.in: Handle required=bzip2. |
| |
| * tests/defs.in: Export SHELL. |
| * tests/cond11.test: Missing quotes. |
| * tests/nogzip2.test: Require bzip2. |
| |
| 2003-11-09 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * NEWS: Add news entries from 1.6.x and 1.7.x. |
| |
| * automake.texi (Optional) <AC_SUBST>: Grammar fixes. |
| |
| * automake.in (check_gnu_standards): Install COPYING only if |
| none of COPYING, COPYING.LIB, or COPYING.LESSER exist. Do not |
| overwrite the license otherwise. |
| * tests/Makefile.am (TESTS): Add license.test. |
| * tests/license.test: New file. |
| |
| * lib/mkinstalldirs: Mention automake-patches@gnu.org and |
| bug-automake@gnu.org. |
| * lib/compile, lib/depcomp, lib/elisp-comp, lib/mdate-sh: |
| Likewise. Also add support for --help and --version. |
| * lib/py-compile, lib/ylwrap: Likewise, and reindent. |
| |
| 2003-11-08 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/tags.am (ETAGSFLAGS, CTAGSFLAGS): Remove. |
| * lib/am/dejagnu.am (RUNTESTFLAGS): Remove. |
| * lib/am/java.am (JAVACFLAGS): Remove. |
| * tests/dejagnu3.test: Check that the environment value |
| of RUNTESTFLAGS get passed down to runtest. |
| Suggested by Mark Mitchell. |
| |
| * lib/am/depend2.am (?GENERIC?%EXT%.o, ?GENERIC?%EXT%.obj) |
| (?GENERIC?%EXT%.lo): Do not echo compile command manually, this |
| breaks `make -s'. Instead, fold the compile command on two lines, |
| so that it take less space on the display. |
| Suggested by Karl Berry and William Fulton. |
| |
| * lib/am/texibuild.am (%DEST_PREFIX%%DEST_SUFFIX%): Rename as ... |
| (%DEST_INFO_PREFIX%%DEST_SUFFIX%): ... this, and honor ?INSRC? |
| to select $(srcdir) or `.' builds. |
| (INFO_DEPS): Define here. |
| * lib/am/texinfos.am (dist-info): Strip filename starting with |
| "$(srcdir)/". |
| * automake.in (output_texinfo_build_rules): Take a new argument |
| $insrc, and adjust substitutions in 'texibuild'. |
| (handle_texinfo_helper): Compute a regex of all user-cleaned |
| files, and use this to select whether to build .info files in `.' |
| or $(srcdir). Give an account of the $(srcdir) vs `.' debacle. |
| Alway build the version.texi and stamp files in $(srcdir). Do not |
| define INFO_DEPS. |
| * tests/Makefile.am (TESTS): Add txinfo23.test, txinfo24.test, |
| and txinfo25.test. |
| * tests/txinfo23.test, tests/txinfo24.test, tests/txinfo25.test: |
| New files. |
| * tests/txinfo13.test, tests/txinfo16.test, tests/txinfo3.test, |
| tests/vtexi.test: Adjust to new rules. |
| |
| 2003-11-05 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * m4/init.m4 (AM_INIT_AUTOMAKE): Require Autoconf 2.58. |
| * configure.ac: Require Autoconf 2.58a, and check for 2.58. |
| |
| 2003-10-27 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/remake-hdr.am ($(srcdir)/%CONFIG_HIN%): Erase %STAMP%. |
| * tests/Makefile.am (TESTS): Add autohdr3.test |
| * tests/autohdr3.test: New file. |
| |
| * automake.in (handle_configure): Rename am__configure_deps |
| as am__aclocal_m4_deps and include $(ACLOCAL_M4_SOURCES) and |
| $configure_ac. Define am__configure_deps as am__aclocal_m4_deps |
| + $(CONFIGURE_DEPENDENCIES) + $(ACLOCAL_M4). Do not define |
| ACLOCAL_M4_DEPS while processing configure.am. |
| (make_paragraphs): Do not define %CONFIGURE_AC%, now unused. |
| (scan_aclocal_m4): Do not distribute aclocal.m4, this |
| is done from lib/am/configure.am. |
| * lib/am/configure.am (%MAKEFILE-IN%, DIST_COMMON, |
| $(top_srcdir)/configure, $(ACLOCAL_M4)): Simplify using |
| $(am__configure_deps) or $(am__aclocal_m4_deps). |
| * lib/am/remake-hdr.am ($(srcdir)/%CONFIG_HIN%): Likewise. |
| |
| 2003-10-26 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/remake-hdr.am ($(srcdir)/%CONFIG_HIN%): Depend on |
| $(am__configure_deps). |
| |
| * automake.in (handle_configure): Distribute all AC_CONFIG_HEADERS |
| sources, and without using require_file. Define %CONFIG_H_DEPS% |
| and %FIRST_CONFIG_HIN% while processing remake-hdr.am. |
| * lib/am/remake-hdr.am (%STAMP%): Use %CONFIG_H_DEPS% instead |
| of (srcdir)/%CONFIG_HIN%. Output the $(srcdir)/%CONFIG_HIN% |
| rule only for the first header (i.e., if %FIRST_CONFIG_HIN%). |
| * tests/autohdr4.test: New file. |
| * tests/Makefile.am (TESTS): Add autohdr4.test. |
| * tests/config.test: Do not grep, run things to see if they work. |
| |
| 2003-10-25 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/output7.test: Populate sub/ with a dummy file, so that it |
| is not empty. This fixes a failure reported by Patrick Welche. |
| * lib/am/distdir.am: Add note about tar's `-o' option and empty |
| directories. |
| |
| 2003-10-24 Didier Cassirame <faded@free.fr> (tiny change) |
| |
| * lib/ylwrap: Typo in regex. |
| |
| 2003-10-23 Paul Eggert <eggert@twinsun.com> |
| |
| * lib/Automake/XFile.pm: Don't assume -j is solo. |
| Issue a more-informative diagnostic. |
| Problems reported by Eric Sunshine. |
| |
| 2003-10-21 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * m4/lispdir.m4 (AM_PATH_LISPDIR): Always check for Emacs. |
| Always define lispdir. |
| * lib/am/lisp.am (install-%DIR%LISP, uninstall-%DIR%LISP): Check |
| $(EMACS) to decide whether _LISP files must be installed, |
| not $(lispdir). |
| * doc/automake.texi (Emacs Lisp): Mention the two ways to install |
| non byte-compiled Emacs lisp files. |
| * tests/lisp4.test, tests/lisp5.test: Check "make install" |
| when EMACS=no. |
| Suggested by Simon Josefsson. |
| |
| * NEWS: Clarify the entry about multiple conditional definitions |
| of _PROGRAMS, _LDADD, and _LIBADD. |
| Report from Simon Josefsson. |
| |
| * lib/am/install.am (install-strip): Override install_sh_PROGRAM |
| too. |
| Report from Elmar Hoffmann. |
| |
| 2003-10-07 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * aclocal.in ("MAIN", usage, parse_arguments): Move near |
| the end, so "MAIN" can use prototypes. |
| (scan_configure): Move later too, for the sake of prototypes. |
| (scan_configure_dep): Fix setting of $scanned_configure_dep. |
| (trace_used_macros): Do not take any argument. |
| |
| 2003-10-06 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/stdlib2.test: Check AM_LDFLAGS alone. |
| |
| * lib/config.guess, lib/config.sub, lib/texinfo.tex: New upstream |
| versions. |
| |
| * automake.in (handle_ltlibraries): Also grep AM_LDFLAGS for `-module'. |
| * tests/stdlib2.test: New file. |
| * tests/Makefile.am (TESTS): Add stdlib2.test. |
| Report from Kevin P. Fleming. |
| |
| 2003-10-03 Richard Dawe <rich@phekda.freeserve.co.uk> (tiny change) |
| |
| * tests/defs.in: For required=runtest, check that we are using |
| a DejaGnu that supports specifying the program on the command-line. |
| |
| 2003-10-03 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| For Debian Bug #213524: |
| * lib/am/texinfos.am (install-info-am, uninstall-info-am): Merge |
| stderr and stdout, and grep only the first line while testing |
| install-info --version's output. This revert part of the change |
| from 2001-05-18. |
| |
| 2003-10-01 Akim Demaille <akim@epita.fr> |
| |
| * m4/amversion.in: Add (C) to the Copyright notice. |
| |
| 2003-10-01 Paul Eggert <eggert@twinsun.com> |
| |
| * lib/Automake/XFile.pm: Use Errno. |
| (lock): Ignore ENOLCK errors. Problem reported Andreas Schwab in |
| <https://mail.gnu.org/archive/html/bug-autoconf/2003-09/msg00141.html>. |
| |
| 2003-09-30 Tom Tromey <tromey@redhat.com> |
| |
| * lib/Automake/Options.pm (_process_option_list): Recognize |
| no-dist. |
| * NEWS: Update. |
| * doc/automake.texi (Options): Document no-dist. |
| * automake.in (check_cygnus): Set no-dist option. |
| (handle_dist): Recognize no-dist. |
| * tests/nodist3.test: New file. |
| * tests/Makefile.am (TESTS): Added nodist3.test. |
| |
| 2003-09-29 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_clean): Take $makefile as argument, and |
| define %MAKEFILE% while processing clean.am. |
| (generate_makefile): Pass $makefile to handle_clean. |
| * lib/am/clean.am (distclean, maintainer-clean): Erase %MAKEFILE%, |
| not Makefile. |
| * tests/gnumake.test: New file. |
| * tests/Makefile.am (TESTS): Add gnumake.test. |
| Report from Braden N. McDaniel. |
| |
| 2003-09-26 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * doc/automake.texi (Scripts): Update the example about automake. |
| Mention `dist_' for distributed scripts. |
| |
| * lib/mkinstalldirs: Clean up after NextStep and OpenStep mkdir. |
| Suggested by Eric Sunshine. |
| |
| 2003-09-25 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * README: More mailing lists. |
| |
| * NEWS: Mention the switch to GNU FDL for the manual. |
| |
| 2003-09-24 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/install-sh (src, dst): Protect names starting with `-', |
| as in mkinstalldirs. |
| |
| * configure.in: Rename as ... |
| * configure.ac: ... this. |
| * README: s/configure.in/configure.ac/. |
| |
| * doc/fdl.texi: New file. |
| * doc/Makefile.am (automake_TEXINFOS): New variable. |
| * doc/automake.texi (Copying This Manual): New appendix, include |
| fdl.texi. |
| (Macro and Variable Index, General Index): Move as subsections of ... |
| (Indices): This new appendix. |
| |
| * doc/automake.texi: Refer to configure.ac instead of configure.in. |
| |
| * automake.texi: Move ... |
| * doc/automake.texi: ... here. |
| * doc/Makefile.am: New file. |
| * configure.in: Output doc/Makefile. |
| * Makefile.am (SUBDIRS): Add doc. |
| (ETAGS_ARGS, TAGS_DEPENDENCIES): Move to doc/Makefile.am. |
| |
| 2003-09-23 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * aclocal.in (write_aclocal): Consider files with relative |
| paths as local to the project, i.e., subject to m4_include. |
| * tests/subpkg.test (ACLOCAL_AMFLAGS): Make sure m4_include |
| is also used for .m4 files in the outer project. |
| |
| Support for multiple inputs in AC_CONFIG_FILES. |
| Requested long ago by Harlan Stenn. |
| * automake.in (handle_dist): Remove unused argument $makefile. |
| (handle_subdirs): Expect SUBDIRS elements in $relative_dir, |
| not $am_relative_dir. |
| (rewrite_inputs_into_dependencies): Allow $add_srcdir to |
| be a filename that must always be prefixed by $(srcdir) or |
| $(top_srcdir). |
| (handle_configure, generate_makefile): Revamp to make the |
| Makefile.am, Makefile.in, Makefile more independent. |
| (locate_am): New function. |
| (scan_configure_dep, parse_arguments): Use locate_am. |
| (MAIN): Adjust call to generate_makefile. |
| * lib/am/configure.am: Remove %MAKEFILE-IN% from the dependencies |
| of %MAKEFILE%. %MAKEFILE-IN% is already in %MAKEFILE-DEPS%. |
| * tests/output6.test, tests/output7.test: New files. |
| * tests/Makefile.am (TESTS): Add them. |
| * automake.texi (Requirements) <AC_CONFIG_FILES>: Document how |
| multiple inputs are scanned. |
| |
| 2003-09-13 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * Makefile.am (FETCHFILES, fetch): Do not fetch lib/Automake/XFile.pm |
| and lib/Automake/Struct.pm from Autoconf. |
| * lib/Automake/XFile.pm: Update comment, Automake is now |
| the master for this file. Cosmetic changes. |
| |
| 2003-09-09 Akim Demaille <akim@epita.fr> |
| |
| * lib/Automake/FileUtils.pm (&update_file): s/cannot not/cannot/g. |
| Reported by Gary Vaughan. |
| (&find_file): Walk the @include in forward order. |
| |
| 2003-09-09 Akim Demaille <akim@epita.fr> |
| |
| * lib/Automake/FileUtils.pm (&update_file): Be sure not to leave |
| trailing files. |
| |
| 2003-09-07 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Changes to m4_included files should also cause aclocal.m4 to change. |
| * aclocal.in (m4_include_rx): New variable. |
| (scan_configure_dep): New function. |
| (scan_configure, add_file): Simplify using scan_configure_dep. |
| * tests/Makefile.am (TESTS): Add acloca13.test. |
| * tests/aclocal13.test: New file. |
| |
| * tests/instsh.test: Do not reset $ACLOCAL and $AUTOMAKE now |
| that we have fake version in the $PATH. |
| |
| * aclocal.in (add_file): Remove useless filling of $output, probably |
| left a after CVS conflict. This code is now in write_aclocal. |
| |
| * aclocal.in (configure_ac): Do not call require_configure_ac |
| before parsing the options. |
| * automake.in (configure_ac): Likewise. |
| * lib/Automake/Variable.pm (configure_ac): Do not require configure.ac, |
| find it. |
| * lib/Automake/Configure_ac.pm (require_configure_ac): |
| find_configure_ac never return an undefined value, so test |
| the file's existence instead. |
| * tests/Makefile.am (TESTS): Add help.test. |
| * tests/help.test: New file. |
| |
| 2003-09-06 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/XFile.pm: Update to use ChannelDefs. |
| (close): Call Automake::FileUtils::handle_exec_errors on errors. |
| * automake.in (scan_autoconf_files): Exit with $?=63 on version |
| mismatch. |
| (scan_autoconf_traces): Likewise. Close the autoconf pipe to |
| capture abnormal exits. |
| * aclocal.in ($exit_status): Remove, and use Channels.pm's $exit_code |
| instead. |
| (trace_used_macros): Close the autom4te pipe to capture abnormal exits. |
| * lib/missing: When a tool has run and exited with $?=63, emulate |
| it. Adjust the diagnostic and pretend the tool is tool old in this |
| case. Use an emacs-updated "scriptversion" variable. |
| * configure.in: Output tests/aclocal-${APIVERSION} and |
| tests/automake-${APIVERSION}. |
| * tests/aclocal.in, tests/automake.in, |
| tests/missing.test, tests/missing2.test: New files. |
| * tests/defs.in (AUTOMAKE, ACLOCAL, PATH): Define |
| to use tests/aclocal-$APIVERSION and tests/automake-$APIVERSION. |
| * tests/dup3.test: Remove. alocal9.test, acloca10.test, and others are |
| already testing for this. |
| * tests/depacl2.test, tests/dup2.test, tests/order.test: Fix |
| configure.in so that aclocal works. |
| * tests/defun.test: Quote the AC_DEFUN body. |
| * tests/Makefile.am (TESTS): Add missing.test and missing2.test, |
| and remove dup3.test. |
| (check_SCRIPTS): Add aclocal and automake. |
| |
| * tests/unused.test: Quote AC_DEFUN arguments. |
| |
| 2003-09-05 Paul Eggert <eggert@twinsun.com> |
| |
| * NEWS, aclocal.in, automake.in, automake.texi, lib/ansi2knr.c, |
| lib/depcomp, lib/missing, lib/py-compile, |
| lib/Automake/Channels.pm, lib/Automake/Rule.pm, |
| lib/Automake/Variable.pm, lib/Automake/tests/Condition.pl, |
| lib/am/dejagnu.am, lib/am/depend.am, lib/am/lisp.am, |
| lib/am/remake-hdr.am, lib/am/texi-vers.am, m4/obsolete.m4, |
| m4/python.m4, tests/backsl4.test, tests/defs.in, |
| tests/dejagnu7.test, tests/depacl2.test, tests/dirlist.test, |
| tests/error.test, tests/getopt.test, tests/gnuwarn.test, |
| tests/include2.test, tests/libobj10.test, tests/libtool5.test, |
| tests/libtool6.test, tests/lisp3.test, tests/phony.test, |
| tests/pr220.test, tests/subcond2.test, tests/subcond3.test, |
| tests/vtexi.test: |
| Spelling and minor grammar fixes. |
| |
| 2003-09-01 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/config.sub, lib/config.guess, lib/texinfo.tex, |
| lib/config-ml.in, lib/symlink-tree: New upstream versions. |
| |
| 2003-08-31 Thien-Thi Nguyen <ttn@gnu.org> (tiny change) |
| |
| * tests/yacc7.test: Require bison. |
| |
| 2003-08-31 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * aclocal.in (scan_file): Warn about underquoted AC_DEFUN. |
| ($underquoted_manual_once): New variable. |
| * automake.texi (Extending aclocal): Document this. |
| |
| 2003-08-29 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * aclocal.in (@file_order): New variable, to make sure |
| files are output in the opposite order of the -I arguments. |
| (scan_file): Fill it. |
| (trace_used_macros, write_aclocal): Use it. |
| (scan_m4_files): Reverse the directory contents, so that |
| macros from the lexicographically greatest files are preferred. |
| * tests/aclocal9.test, tests/acloca10.test, tests/acloca11.test: |
| New files. |
| * tests/Makefile.am (TESTS): Add them. |
| |
| 2003-08-24 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| For Debian Bug #206299: |
| * automake.in ($configure_deps_greatest_timestamp, |
| $output_deps_greatest_timestamp): New variables. |
| (initialize_per_input): Reset $output_deps_greatest_timestamp. |
| (scan_autoconf_traces, scan_autoconf_files, read_am_file): |
| Update $configure_deps_greatest_timestamp and |
| $output_deps_greatest_timestamp |
| (generate_makefile): Rewrite the logic to decide whether |
| to rewrite the output. Move the leading dup_channel_setup |
| and trailing drop_channel_setup to MAIN, so that |
| drop_channel_setup is executed for all exit paths. |
| * tests/aclocal7.test: Update to check for $AUTOMAKE --no-force |
| * tests/distcom6.test: New file. Report from Scott James Remnant. |
| * tests/Makefile.am (TESTS): Add distcom6.test. |
| |
| * configure.in: Require Autoconf 2.57b to be sure |
| aclocal can use autom4te --language Autoconf-without-aclocal-m4. |
| * m4/init.m4: Likewise. Move the AC_PREREQ and m4_pattern_allow |
| calls inside the AM_INIT_AUTOMAKE macro. |
| * m4/auxdir.m4, m4/cond.m4, m4/lex.m4, m4/regex.m4: Move |
| AC_PREREQ calls inside the macros. |
| * m4/header.m4: Remove AC_PREREQ. |
| |
| * automake.in (file_contents_internal): Do not add newlines before |
| empty actions. |
| |
| * aclocal.in (write_aclocal): Take an output file and list of |
| used macros in arguments and make up the file contents here. |
| (trace_used_macros): New function. |
| (add_file): Do not update $output. |
| ($output): Delete. |
| (MAIN): Call trace_used_macros. Then rewrite aclocal.m4 only |
| for these traced macros. This should shorten aclocal.m4 by |
| stripping out unused macros. |
| * automake.texi (Invoking aclocal): Document ${AUTOM4TE}. |
| * tests/aclibobj.test: Make sure configure.in exists by the time |
| aclocal runs. |
| * tests/aclocal8.test: New file. |
| * tests/Makefile.am (TESTS): Add aclocal8.test. |
| Suggested by Bruno Haible and Akim Demaille. |
| |
| 2003-08-21 Akim Demaille <akim@epita.fr> |
| |
| * lib/Automake/Configure_ac.pm (&find_configure_ac) |
| (&require_configure_ac): Accept an optional directory argument. |
| ($configure_ac): Remove. |
| * aclocal.in, automake.in ($configure_ac): New. |
| * lib/Automake/Variable.pm: Don't use $configure_ac, just |
| configure.ac. |
| |
| 2003-08-20 Akim Demaille <akim@epita.fr> |
| |
| * lib/Automake/FileUtils.pm: More perldoc. |
| (&up_to_date_p): New. |
| |
| 2003-08-17 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Fix for PR automake/398: |
| * m4/python.m4: Do not call AC_PATH_PROGS if $PYTHON is already |
| set. Display `none' instead of `:' and $PYTHON is set to `:' |
| when no suitable interpreter is found. Honor ACTION-IF-FOUND and |
| ACTION-IF-NOT-FOUND. |
| * automake.texi (Python): Document ACTION-IF-FOUND and |
| ACTION-IF-NOT-FOUND. |
| * tests/python4.test, tests/python5.test, tests/python6.test, |
| tests/python7.test, tests/python8.test, tests/python9.test: New |
| files. |
| * tests/Makefile.am (TESTS): Add them. |
| Report from Per Cederqvist. |
| |
| 2003-08-13 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Fix for PR automake/399: |
| * m4/python.m4: Use AC_PATH_PROGS, not AC_PATH_PROG. |
| Report from Per Cederqvist. |
| |
| 2003-08-12 Raja R Harinath <harinath@acm.org> |
| |
| * lib/Automake/Condition.pm (strip): Replace loop with 'grep'. |
| (not): Replace loop with 'map'. |
| * lib/Automake/DisjConditions.pm (sub_conditions): Likewise. |
| * lib/Automake/Item.pm (not_alwasy_defined_in_cond): |
| Don't 'simplify' result of 'invert', since it's already in |
| canonical form. |
| * lib/Automake/Rule.pm (define): Replace loop with |
| 'not_always_defined_in_cond'. |
| |
| * lib/Automake/DisjConditions.pm (ambiguous_p): Typo in comment. |
| * lib/Automake/Rule.pm (accept_extensions, msg_cond_rule): Likewise. |
| (define): Reword comment slightly. |
| * Variable.pm (_var_order, msg_cond_var): Typo in comment. |
| * tests/cond20.test (var2): Use foo.c instead of foo.cc to avoid |
| spurious automake error exit. |
| |
| 2003-08-12 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Item.pm, lib/Automake/ItemDef.pm: New files. |
| * lib/Automake/Rule.pm, lib/Automake/RuleDef.pm: New files. |
| * lib/Automake/Makefile.am (dist_perllib_DATA): Add them. |
| * lib/Automake/VarDef.pm: Make this a subclass of Automake::ItemDef. |
| (new): Adjust to call Automake::ItemDef::new. |
| (comment, location, owner): Delete. Now inherited from ItemDef. |
| * lib/Automake/Variable.pm: Make this a subclass of Automake::Item. |
| (_new): Adjust to call Automake::Item::new. |
| (name, def, rdef, _set, conditions, not_always_defined_in_cond): |
| Delete. How inherited from Item, where `_set' is called `set'. |
| * automake.in (SUFFIX_RULE_PATTERN): Delete. Now in Automake::Rule. |
| (suffix_rules_default): Delete. Now |
| Automake::Rule::_suffix_rules_default |
| (suffixes): Delete. Now Automake::Rule::suffixes. |
| (TARGET_AUTOMAKE, TARGET_USER): Delete. Now |
| Automake::RuleDef::RULE_AUTOMAKE and Automake::RuleDef::RULE_USER. |
| (%targets, %target_source, %target_name, %target_owner): Delete, |
| replaced by the Rule and RuleDef classes. |
| (dependencies, depend, actions): Delete. Now in Automake::Rule. |
| (suffix_rules, register_suffix_rule): Likewise. |
| (KNOWN_EXTENSIONS_PATTERN, accept_extensions): Likewise. |
| (known_extensions_list): Delete. Now |
| Automake::Rule::_known_extensions_list. |
| (target_conditions): Delete. Now inherited by Automake::Rule |
| from Automake::Item::conditions. |
| (rule_define): Delete. Now Automake::Rule::define. Adjust all |
| callers. |
| (target_defined): Delete. Now Automake::Rule::rule. Adjust all |
| callers. |
| (initialize_per_input): Adjust to call Automake::Rule::reset. |
| (err_target, err_cond_target, msg_cond_target, msg_target, |
| reject_target): Delete. Now defined in Automake::Rule as |
| err_rule, err_cond_rule, msg_cond_rule, msg_rule and reject_target. |
| Adjust all callers. |
| (handle_languages): Call suffix_rules_count. |
| * tests/location.test: Adjust expected diagnostics. We now display |
| $(EXEEXT) accurately. |
| |
| 2003-08-10 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Revert the fix for PR automake/291: |
| * lib/Automake/Variable.pm (define): Do not warn about variables |
| starting with `_' which are an issue on NEWS-OS 4.2R. According |
| to Paul Eggert, NEWS-OS 4.2R is ten years old, the latest version |
| was released on 1996 and is not in wide use. On the other hand, |
| variables starting with `_' are mandatory in several situations, |
| so diagnosing them is more annoying than useful. |
| * tests/canon5.test: Do not use -Wno-portability. |
| * tests/vars2.test: Delete. |
| * tests/Makefile.am (TESTS): Remove vars2.test. |
| Suggested by Jim Meyering. |
| |
| 2003-08-09 Raja R Harinath <harinath@acm.org> |
| |
| * lib/Automake/DisjConditions.pm (ambiguous_p): Simplify slightly. |
| * lib/Automake/tests/DisjConditions.pl (test_ambig): Test |
| Automake::Disjunctions::ambiguous_p. |
| |
| 2003-08-07 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm (condition_ambiguous_p): Move ... |
| * lib/Automake/DisjConditions.pm (ambiguous_p): ... here. |
| * automake.in (rule_define): Adjust usage. |
| * lib/Automake/Variable.pm (_check_ambiguous_condition): Likewise. |
| |
| * lib/Automake/Options.pm: New file. |
| * lib/Automake/Makefile.am (dist_perllib_DATA): Add Options.pm. |
| * automake.in (FOREIGN, GNU, GNITS, $default_strictness) |
| ($default_strictness_name, $strictness, $strictness_name) |
| (%options, %global_options, process_option_list) |
| (set_strictness): Remove, now in Options.pm. |
| (initialize_per_input): Call Automake::Options::reset. |
| (handle_options, get_object_extension, get_object_extension) |
| (handle_languages, handle_single_transform_list, handle_compile) |
| (handle_texinfo_helper, handle_man_pages, handle_dist) |
| (handle_configure, do_check_merge_target) |
| (handle_factored_dependencies, handle_tests) |
| (handle_minor_options, scan_autoconf_traces, check_cygnus) |
| (lang_sub_obj, lang_c_rewrite, lang_c_finish, rule_define) |
| (make_paragraphs, am_install_var, parse_arguments): Adjust |
| to set and read options via the new interface. |
| |
| 2003-08-07 Raja R Harinath <harinath@acm.org> |
| |
| * Makefile.am (maintainer-check): Update perllibdir. |
| * lib/Automake/Makefile.am (Config.pm): Depend on Makefile too. |
| (EXTRA_DIST): Add Config.in. |
| * Makefile.in, lib/Automake/Makefile.in: Regenerate. |
| * tests/defs.in (AUTOMAKE, ACLOCAL): Use absolute paths in |
| $perllibdir. |
| |
| 2003-08-06 Raja R Harinath <harinath@acm.org> |
| |
| * configure.in (AUTOMAKE, ACLOCAL): Search the 'lib' directory |
| from the builddir too, to pick up Automake::Config. |
| * tests/defs.in (AUTOMAKE, ACLOCAL): Likewise. |
| * configure: Regenerate. |
| * automake.in (BEGIN): Handle multiple directories in $perllibdir. |
| * aclocal.in (BEGIN): Likewise. |
| |
| 2003-08-07 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/ltcond.test: Thinko. |
| |
| 2003-08-06 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Config.in: New file. |
| * lib/Automake/Makefile.am (nodist_perllib_DATA, do_subst, |
| CLEANFILES): New variables. |
| (Config.pm): New rule. |
| * Makefile.am (maintainer-check): Adjust expected differences |
| between automake.in and automake. |
| * aclocal.in, automake.in: Use Automake::Config. |
| |
| 2003-08-05 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/ltconv.test: s/rm/rm -f/ to placate maintainer-check. |
| |
| * automake.in (handle_texinfo_helper): Use the user definition |
| of TEXINFO_TEX before checking for cygnus or AC_CONFIG_AUX_DIR. |
| * tests/txinfo22.test: New file. |
| * tests/Makefile.am (TESTS): Add txinfo22.test. |
| Report from Tom Tromey. |
| |
| 2003-08-03 Raja R Harinath <harinath@acm.org> |
| |
| * lib/Automake/Variable.pm (@EXPORT): Remove |
| traverse_variable_recursively and |
| require_variables_for_variable. |
| (require_variables_for_variable, traverse_variable_recursively) |
| (_traverse_variable_recursively_worker): Convert to |
| Automake::Variable methods, remove support for being |
| invoked with variable names, and rename to ... |
| (requires_variables, traverse_recursively) |
| (_do_recursive_traversal): ... these. |
| (_value_as_list_recursive_worker, transform_variable_recursively): |
| Update to reflect changes. |
| * automake.in (handle_LIBOBJS, handle_ALLOCA) |
| (handle_libraries, handle_ltlibraries, am_primary_prefixes): |
| Likewise. |
| (define_objects_from_sources): Fix typo in comment. |
| |
| 2003-08-02 Raja R Harinath <harinath@acm.org> |
| |
| * automake.in (handle_source_transform): Replace 'grep' with 'map'. |
| (register_language): Replace 'grep' with 'foreach' modifier. |
| |
| 2003-08-01 Raja R Harinath <harinath@acm.org> |
| |
| * lib/Automake/Variables.pm (variables): Return a list of |
| Automake::Variable instances, not a list of strings. |
| (dump): Remove support for being invoked with a string. |
| (variables_dump): Adapt to these changes. |
| * automake.in (check_typos): Likewise. |
| (am_primary_prefixes): Likewise. |
| |
| 2003-07-31 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> (tiny change) |
| |
| * lib/depcomp (aix): Support AIX Compiler version 6. |
| |
| 2003-07-31 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (A Shared Library): Rewrite and split into |
| subsections. Valuable comments from Norman Gray, Harlan Stenn, |
| Tim Van Holder, and Guido Draheim. |
| * tests/ltcond.test, tests/ltcond2.test, tests/ltconv.test: New files. |
| * tests/Makefile.am (TESTS): Add them. |
| |
| 2003-07-30 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_single_transform_list): Complain about |
| foo.$(OBJEXT) being created both with libtool and without, not |
| about foo.lo. |
| Report from Tim Van Holder. |
| |
| 2003-07-29 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * Makefile.am (FETCHFILES, fetch): Add config-ml.in and |
| symlink-tree. |
| * lib/config.sub, lib/config-ml.in, lib/texinfo.tex: New |
| upstream versions. |
| |
| 2003-07-28 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_configure): Cosmetic change to avoid |
| a maintainer-check complaint. |
| |
| 2003-07-27 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm (@EXPORT): Remove variable_dump. |
| (variable_dump): Replace by ... |
| (dump): ... this method. |
| (rdef, _check_ambiguous_condition): Adjust to use ->dump. |
| (define, variables_dump): Adjust to use Automake::Variable::dump |
| |
| * lib/am/compile.am (mostlyclean-compile): Do not erase core dumps. |
| * automake.texi (Built sources example): Adjust example. |
| |
| 2003-07-26 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (get_object_extension, handle_languages) |
| (handle_single_transform_list, handle_compile, handle_compile) |
| (handle_texinfo_helper, handle_texinfo_helper, handle_man_pages) |
| (handle_tests, handle_minor_options, check_gnu_standards) |
| (lang_sub_obj, lang_c_rewrite, lang_c_finish, rule_define): |
| Simplify "if (defined $options{'X'})" into "if ($options{'X'})". |
| |
| Complete changes from 2003-07-08. |
| * automake.in ($cmdline_use_dependencies, $use_dependencies): Remove, |
| replaced by $options{'no-dependencies'}. |
| ($global_options): Remove. |
| (%global_options): New variable. |
| (initialize_per_input): Empty %options. |
| (process_option_list): Take a location and %options ref argument, |
| process no-dependencies as other options. |
| (handle_options): Do not reparse the global options, just initialize |
| %options from %global_options and fill it with local options. |
| (handle_languages, handle_single_transform_list) |
| (handle_configure, check_cygnus): Adjust usage of |
| $options{'no-dependencies'}. |
| (make_paragraphs): Adjust usage of $options{'cygnus'}. |
| (parse_arguments): Set cygnus and no-dependencies in %global_options. |
| (scan_autoconf_traces) <AM_INIT_AUTOMAKE>: Call process_option_list |
| to fill %global_options. |
| |
| 2003-07-25 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/remake4.test: Use `$MAKE distdir' instead of `$MAKE dist' to |
| avoid the use of tar. |
| |
| 2003-07-24 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/gnuwarn2.test: Typo. |
| |
| * tests/insthook.test: Use $MAKE, not make. |
| |
| Fix missing rebuilds during `make dist' with BSD make. |
| * automake.in (generate_makefile): Do not push Makefile.in, and |
| Makefile.am into DIST_COMMON here. |
| * lib/am/configure.am (DIST_COMMON): Do it here, and use |
| %MAKEFILE-AM% and %MAKEFILE-IN% so that items in DIST_COMMON |
| actually match the targets. Prefix `configure' with `$(srcdir)/' |
| to match the target. |
| * tests/remake4.test: New file. |
| * tests/Makefile.am (TESTS): Add remake4.test. |
| Report from Akim Demaille. |
| |
| 2003-07-23 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_multilib): Register all-multi. |
| (file_contents_internal): Insert \n when concatenating actions |
| from "factored" rules. |
| * lib/config-ml.in: New file, from GCC, including a patch |
| from Ralf Corsepius (see GCC's PR 11526). |
| * lib/symlink-tree.in: New file, from GCC. |
| * lib/Makefile.am (dist_script_DATA): Add config-ml.in and |
| symlink-tree. |
| * lib/am/clean.am (distclean-generic): Do not delete Makefile here... |
| (distclean, maintainer-clean): ... do it here. |
| * lib/am/depend.am (distclean-depend): Likewise, replace by |
| (distclean, maintainer-clean): ... these. |
| * lib/am/multilib.am (all-recursive, install-recursive, |
| mostlyclean-recursive, clean-recursive, distclean-recursive, |
| maintainer-clean-recursive): Remove these rules. |
| (mostlyclean-am, clean-am, distclean-am, maintainer-clean-am): Replace |
| by ... |
| (mostlyclean, clean, distclean, maintainer-clean): ... these. |
| (all-am): Remove, done in handle_multilib. |
| (install-am): Replace by ... |
| (install-exec-am): ... this. |
| * tests/Makefile.am (TESTS): Add multlib.test. |
| * tests/multlib.test: New file, based on a test case by |
| Ralf Corsepius |
| |
| 2003-07-23 Tom Tromey <tromey@redhat.com> |
| |
| * lib/missing (autom4te): Typo. |
| |
| 2003-07-16 Derek Price <derek@ximbiot.com> |
| |
| * automake.in (scan_autoconf_traces): Handle AC_CONFIG_LINKS. |
| (handle_configure): Handle adding AC_CONFIG_LINKS arguments to |
| distclean targets (CONFIG_CLEAN_FILES makefile var). |
| * NEWS: Note new handling of AC_CONFIG_LINKS. |
| * automake.texi (Other things Automake recognizes): Ditto. |
| * tests/Makefile.am (TESTS): Add new tests. |
| * tests/conflnk.test: New test that links are cleaned on distclean. |
| * tests/conflnk2.test: New test that source files for links are |
| distributed. |
| |
| 2003-07-15 Ralf Corsepius <corsepiu@faw.uni-ulm.de> (tiny change) |
| |
| * automake.in (scan_autoconf_traces): Trace AM_ENABLE_MULTILIB to |
| render $seen_multilib functional again. |
| |
| 2003-07-10 Raja R Harinath <harinath@cs.umn.edu> |
| |
| Avoid using refs as hash keys. |
| * lib/Automake/Variable.pm ($_traversal): New. |
| (reset): Reset $_traversal. |
| (_new): New attribute 'scanned'. |
| (%_vars_scanned): Remove. |
| (traverse_variable_recursively) |
| (traverse_variable_recursively_worker): |
| Use $_traversal instead of %_vars_scanned to detect recursively |
| defined variables. |
| |
| * lib/am/configure.am (am--refresh): Silence. |
| |
| 2003-07-10 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm (define): Make clear the diagnostic |
| about variable names starting with `_' is about *Make* variables. |
| |
| For Debian Bug #193907: |
| * automake.texi (Clean): make maintainer-clean should still |
| allow ./configure && make to run. |
| |
| * automake.texi (CVS): Typo. |
| |
| 2003-07-09 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * aclocal.in: Use Automake::FileUtils. |
| (parse_arguments, scan_configure, scan_m4_files): Never call |
| "die" to print an error message. Use print and exit. |
| * automake.in: Use Automake::FileUtils. |
| * lib/Automake/General.pm ($debug, $help, $tmp, $verbose, |
| $version, &debug, &getopt, &mktmpdir, &verbose): Remove. |
| (END): Do not massage Perl's exit code. Do not clean any temporary |
| directory. |
| (find_file, mtime, update_file, xsystem, contents): Move to ... |
| * lib/Automake/FileUtils.pm: ... this new file. Adjust to |
| report errors using Channels. |
| (handle_exec_errors, xqx): New functions, from Autoconf. |
| * lib/Automake/Makefile.am (dist_perllib_DATA): Add FileUtils.pm. |
| |
| * lib/Automake/Variable.pm (_traverse_variable_recursively_worker): |
| Return the empty list on recursively defined variable. This |
| supersedes my change of 2003-07-02. |
| |
| 2003-07-08 Akim Demaille <akim@epita.fr> |
| |
| * automake.in ($cygnus_mode): Replace with $options{'cygnus'}. |
| Adjust all dependencies. |
| (&depend): Move next to %dependencies and prototype. |
| (&initialize_per_input): Initialize the 'cygnus' field of |
| '%options' to spare the code from 'exists' or 'defined' when |
| testing it. |
| (&handle_configure, &do_check_merge_target, &check_cygnus): Prototype. |
| (&parse_arguments): Rename '%options' and '%options_1st_pass' as |
| '%cli_options' and '%cli_options_1st_pass' to avoid clashes and |
| inconsistencies. |
| |
| 2003-07-07 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (generate_makefile): Move near the end of the |
| file, after the definition of all called functions, so that |
| prototypes can be enforced. |
| |
| 2003-07-06 Akim Demaille <akim@epita.fr> |
| |
| * lib/am/subdirs.am (RECURSIVE_TARGETS): Move install-recursive, |
| install-exec-recursive, install-data-recursive and |
| uninstall-recursive addition to... |
| * lib/am/install.am: here. |
| * lib/am/texinfos.am, lib/am/subdirs.am: Remove the .PHONY |
| declaration of RECURSIVE_TARGETS. |
| |
| 2003-07-06 Akim Demaille <akim@epita.fr> |
| |
| * lib/Automake/Variable.pm, lib/Automake/VarDef.pm (VAR_SORTED): |
| New variable type. |
| Handle it. |
| * automake.in (&handle_subdirs): Prototype. |
| Adjust callers. |
| Make RECURSIVE_TARGETS a VAR_SORTED. |
| |
| 2003-07-06 Akim Demaille <akim@epita.fr> |
| |
| * automake.in (&define_files_variable): New. |
| (&handle_texinfo_helper): Move the handling of user variables from |
| here, to... |
| (&handle_texinfo): here. |
| This is to balance the size of these functions, and to match the |
| convention of other _helper functions. |
| (&handle_texinfo_helper): Use &define_files_variable. |
| Move some code to use less variables. |
| Rename $info_cursor as $texi. |
| (&handle_texinfo): Do not call handle_texinfo_helper if there are |
| no TEXINFOS. |
| * lib/am/texinfos.am: Sort the occurrences of dvi, info, pdf, ps |
| and html. |
| Remove *-recursive targets from .PHONY, they are part of |
| $(RECURSIVE_TARGETS) anyway. |
| (install-info, mostlyclean-aminfo): Are .PHONY. |
| |
| 2003-07-05 Akim Demaille <akim@epita.fr> |
| |
| * lib/am/distdir.am: Use ';' as a terminator, not a separator, for |
| sed complex commands, as required by NetBSD sed. |
| Reported by Patrick Welche. |
| |
| 2003-07-05 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/config.guess, lib/config.sub: New upstream version. |
| |
| 2003-07-04 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (Optional, Dist): AC_CONFIG_AUX_DIR files |
| are automatically distributed. |
| |
| * lib/depcomp (icc): Update to grok ICC 7.1's output. |
| * m4/depend.m4 (_AM_DEPENDENCIES): Check dependency generation |
| in a subdirectory, and with many dependencies. This |
| catches more failures of depcomp. |
| Reports from Ralf Wildenhues and Akim Demaille. |
| |
| 2003-07-04 Akim Demaille <akim@epita.fr> |
| |
| * automake.in (&scan_texinfo_file, &output_texinfo_build_rules, |
| (&handle_texinfo_helper, &handle_texinfo): Formatting changes. |
| Prototype properly. |
| Don't use & when calling functions. |
| |
| 2003-07-03 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * NEWS: Categorize entries. |
| Suggested by Jim Meyering. |
| |
| * Makefile.am (maintainer-clean): Disallow '$AUTOMAKE && exit 1'. |
| Ignore @...@ substitutions in comments. |
| * tests/defs.in: Try to make the shell more POSIX compliant. |
| (AUTOMAKE_run, AUTOMAKE_fails): New functions. |
| * tests/README: Mention AUTOMAKE_fails. |
| * tests/alloca.test, tests/alloca2.test, tests/ansi8.test, |
| * tests/asm.test, tests/backsl3.test, tests/backsl4.test, |
| * tests/badline.test, tests/badopt.test, tests/canon.test, |
| * tests/canon5.test, tests/colneq.test, tests/comment3.test, |
| * tests/comment5.test, tests/cond2.test, tests/cond20.test, |
| * tests/cond23.test, tests/cond24.test, tests/cond27.test, |
| * tests/condinc2.test, tests/conff2.test, tests/cxx2.test, |
| * tests/dejagnu2.test, tests/dirforbid.test, |
| * tests/distcom3.test, tests/else.test, tests/exdir2.test, |
| * tests/exeext2.test, tests/gcj2.test, tests/gcj5.test, |
| * tests/getopt.test, tests/gettext.test, tests/gettext2.test, |
| * tests/gnits.test, tests/gnuwarn.test, tests/gnuwarn2.test, |
| * tests/insh.test, tests/lex2.test, tests/libobj10.test, |
| * tests/libobj12.test, tests/libobj13.test, |
| * tests/libobj3.test, tests/library2.test, |
| * tests/library3.test, tests/libtool4.test, |
| * tests/libtool6.test, tests/lisp2.test, tests/location.test, |
| * tests/nogzip2.test, tests/output5.test, tests/overrid.test, |
| * tests/percent.test, tests/percent2.test, |
| * tests/pluseq5.test, tests/pluseq7.test, tests/pluseq9.test, |
| * tests/pr211.test, tests/primary.test, tests/primary2.test, |
| * tests/python2.test, tests/recurs.test, tests/reqd2.test, |
| * tests/seenc.test, tests/specflg.test, tests/specflg2.test, |
| * tests/spell.test, tests/spell2.test, tests/srcsub.test, |
| * tests/srcsub2.test, tests/stdlib.test, tests/subdir7.test, |
| * tests/substtarg.test, tests/suffix11.test, |
| * tests/symlink.test, tests/syntax.test, |
| * tests/targetclash.test, tests/txinfo4.test, |
| * tests/version3.test, tests/warnopts.test, |
| * tests/xsource.test, tests/yacc2.test: Use set -e, |
| AUTOMAKE_fails, and always grep error message. |
| |
| * automake.in (handle_ltlibraries): Fix call to msg. |
| |
| * tests/stamph.test: Delete. |
| * tests/Makefile.am (TESTS): Remove stamph.test. |
| |
| * automake.in (handle_single_transform_list): Use $var->name |
| to print variable in the configure-substitution diagnostic. |
| Do not mention the parent when it is the variable itself. |
| |
| * tests/package.test: Delete. |
| * tests/Makefile.am (TESTS): Remove package.test. |
| |
| * automake.in (cond_stack_else): Return FALSE if `if' was not |
| used. |
| (cond_stack_endif): Return TRUE if `if' was not used. Do not |
| display $negate and $cond, they are irrelevant and maybe undefined. |
| |
| 2003-07-02 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm (_traverse_variable_recursively_worker): |
| Do not return undef when a variable is recursively defined, this |
| causes warnings all over the place. Return the empty string instead. |
| |
| * lib/am/distdir.am (distcheck): Protect loop of DIST_ARCHIVES |
| from empty DIST_ARCHIVES. |
| |
| 2003-07-01 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (scan_autoconf_traces): Check the expected |
| number of arguments of each traced macro. |
| * tests/overrid.test: Fix call to AM_CONDITIONAL. |
| * tests/conff2.test: New files. |
| * tests/Makefile.am (TESTS): Add conff2.test. |
| Report from Paolo Bonzini. |
| |
| 2003-06-30 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in ($SUBST_REF_PATTERN): Do not define. |
| (%gen_varname): Move to Variable.pm, as %_gen_varname. |
| (initialize_per_input): Do not clean %gen_varname. |
| (handle_options, check_libobjs_sources, handle_source_transform, |
| handle_LIBOBJS, handle_ltlibraries, handle_texinfo_helper, |
| handle_man_pages, handle_dist, handle_subdirs, handle_gettext, |
| am_install_var): Adjust to use value_as_list_recursive, |
| loc_and_value_as_list_recursive, and has_conditional_contents. |
| (require_file_with_macro): Accept an Automake::Variable as argument. |
| (traverse_variable_recursively, |
| traverse_variable_recursively_worker, gen_varname, |
| transform_variable_recursively): Move ... |
| * lib/Automake/Variable.pm (traverse_variable_recursively, |
| _traverse_variable_recursively_worker, |
| _gen_varname, transform_variable_recursively): ... here. |
| * automake.in (variable_conditionally_defined, |
| variable_value_as_list_recursive_worker, |
| variable_value_as_list_recursive |
| variable_loc_and_value_as_list_recursive): Move ... |
| * lib/Automake/Variable.pm (has_conditional_contents, |
| _value_as_list_recursive_worker, |
| value_as_list_recursive, loc_and_value_as_list_recursive): ... here. |
| (reset): Reset %_gen_varname. |
| (require_variables_for_variable): Accept an Automake::Variable |
| as argument. |
| |
| 2003-06-27 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/aclocal6.test: Test maintainer-clean in VPATH |
| builds. (For Ralf's fix.) |
| |
| 2003-06-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de> (tiny change) |
| |
| * lib/am/configure.am (maintainer-clean): Remove |
| $(top_srcdir)/autom4te.cache, not autom4te.cache. |
| |
| 2003-06-27 Akim Demaille <akim@epita.fr> |
| |
| * automake.texi: Use @node with a single argument. |
| |
| 2003-06-27 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * m4/Makefile.am (dist_m4data_DATA): Add $(top_srcdir)/m4/amversion.m4. |
| |
| * lib/am/distdir.am (distcheck): Run $(am__remove_distdir) |
| at the end of distcheck. This was mistakenly removed on |
| 2003-06-15. |
| * tests/subpkg.test: Make sure distcheck cleans up after itself. |
| |
| * m4/Makefile.am ($(srcdir)/amversion.m4): Rename as ... |
| ($(top_srcdir)/m4/amversion.m4): ... this. |
| (DISTCLEANFILES): Remove. |
| (nodist_m4data_DATA): Remove. amversion.m4 is automatically |
| distributed. |
| (EXTRA_DIST): Add amversion.in. |
| |
| 2003-06-25 Akim Demaille <akim@epita.fr> |
| |
| * automake.texi (Top): Use @copying and @insertcopying. |
| Make Alexandre an author. |
| * automake.in ($gen_copyright): Add the "(C)" to Copyright. |
| * lib/depcomp: Likewise. |
| |
| 2003-06-23 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm (vardef, rvardef, set_seen): New functions. |
| (variable_defined, examine_variable): Remove. |
| (%_ac_macro_for_var): Add an entry for ALLOCA. |
| (require_variables): Use vardef instead of variable_defined. |
| Do not use _cvar. |
| * automake.in (generate_makefile): Do not push $(SOURCE) into |
| @sources. Use define_pretty_variable to define SOURCES. |
| (handle_LIBOBJS, handle_ALLOCA): Use require_variables_for_variable |
| to require LIBOBJS, LTLIBOBJS and ALLOCA. |
| (handle_programs, handle_ltlibraries): Do not define an empty |
| _DEPENDENCIES or _LDFLAGS variable when none is defined. |
| (define_configure_variable): Do not check whether the variable |
| already exists (it's Automake::Variable::define's job). |
| (require_build_directory): Likewise, do not check |
| the existence of am__dirstamp. |
| (generate_makefile, handle_options, handle_languages) |
| (check_libobjs_sources, handle_single_transform_list) |
| (traverse_variable_recursively_worker, handle_source_transform) |
| (handle_lib_objects, handle_LIBOBJS, handle_compile) |
| (handle_libtool, handle_programs, handle_libraries) |
| (handle_ltlibraries, check_typos, handle_texinfo_helper) |
| (handle_man_pages, handle_tags, handle_dist, handle_subdirs) |
| (scan_aclocal_m4, handle_gettext, handle_footer, handle_install) |
| (handle_all, do_check_merge_target, handle_clean, lang_c_finish) |
| (handle_tests, lang_yacc_target_hook, define_pretty_variable) |
| (define_compiler_variable, define_linker_variable) |
| (make_paragraphs, am_primary_prefixes, am_install_var): Adjust to |
| call var, vardef, or set_seen, instead of variable_defined. Use |
| set_seen only for variables which are actually checked by |
| check_typos. |
| * tests/target.test: Delete. |
| * tests/alloca.test, tests/alloca2.test: New files. |
| * tests/libobj3.test: Check error message. |
| * tests/distcom4.test: Make sure configure is in DIST_COMMON. |
| This replace confdist.test. |
| * tests/Makefile.am (TESTS, XFAIL_TESTS): Remove target.test. |
| (TESTS): Add alloca.test and alloca2.test. Remove confdist.test. |
| |
| 2003-06-20 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_dist): Delete DIST_COMMON before redefining |
| it. Bug report from Akim Demaille. |
| (rewrite_inputs_into_dependencies): Make sure we always return |
| something, even when $add_srcdir is 0. |
| * tests/distcom4.test, tests/distcom5.test: New files. |
| * tests/Makefile.am (TESTS): Add distcom4.test and distcom5.test. |
| |
| * tests/cond29.test: Also check for _SOURCES. |
| Report from Paolo Bonzini. |
| |
| 2003-06-20 Akim Demaille <akim@epita.fr> |
| |
| * lib/am/configure.am: Replace leading spaces with a real tab. |
| |
| 2003-06-15 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/nogzip.test, tests/nogzip2.test: New files. |
| * tests/Makefile.am (TESTS): Add nogzip.test and nogzip2.test |
| |
| 2003-06-15 Akim Demaille <akim@epita.fr> |
| |
| * automake.in (&make_paragraphs): Define %GZIP%. |
| (&process_option_list): Accept no-dist-gzip2. |
| (&handle_dist): Complain when no archive format is enabled. |
| * lib/am/distdir.am (DIST_ARCHIVES): New variable. |
| (dist-gzip, dist-bzip2, dist-tarZ, dist-zip): No longer |
| conditioned. |
| (dist): Build $(distdir).tar.gz conditionally. |
| (distcheck): Use DIST_ARCHIVES to find an archive to unpack, and |
| to list built archives. Run $(MAKE) dist instead of dist-gzip. |
| * automake.texi (Options, The types of distributions): Adjust. |
| |
| 2003-06-15 Jens Elkner <elkner@imsgroup.de> (tiny change) |
| |
| * m4/lispdir.m4 (AM_PATH_LISPDIR): Fix sed commands to work with |
| POSIXLY_CORRECT=1. |
| |
| 2003-06-14 Karl Berry <karl@gnu.org> |
| Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * mkinstalldirs (scriptversion): New variable. Setup emacs hooks |
| to update it each time the file is written, as in install-sh. |
| (usage): Improve message. |
| (--version): New option. |
| (--help): Output to stdout, not stderr. |
| |
| 2003-06-13 Paul Eggert <eggert@twinsun.com> |
| |
| * lib/install-sh (dsttmp, rmtmp): Do not use '#' in file names; |
| it's not guaranteed by POSIX and it doesn't work on OpenVMS. |
| Bug reported by Bernard Giroud in: |
| https://mail.gnu.org/archive/html/autoconf-patches/2003-06/msg00013.html |
| |
| 2003-06-05 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (check_gnu_standards): Use no-installman and |
| no-installinfo's locations. |
| (process_option_list): Fill %options with locations. |
| (check_cygnus) Fill $options{'no-installinfo'} and |
| $options{'no-dependencies'} with $cygnus_mode, so that it |
| remains a Location. |
| * tests/gnuwarn2.test: New file. |
| * tests/Makefile.am (TESTS): Add gnuwarn2.test. |
| |
| 2003-06-04 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (process_option_list): Record the location |
| of ansi2knr's definition. |
| (handle_compile): Use it. |
| * tests/ansi3.test: Make sure the location appears correctly. |
| Update to use set -e. |
| * tests/ansi3b.test: New file. |
| * tests/Makefile.am (TESTS): Add ansi3b.test. |
| |
| * tests/alpha.test: Really run $MAKE. Augment to test |
| subdirectories, and check-news report. |
| * tests/alpha2.test: New file. Bug report from Akim Demaille. |
| * tests/gnits2.test: Make sure README-alpha is not distributed. |
| * tests/Makefile.am (TESTS): Add alpha2.test. |
| * automake.in (handle_minor_options): Distribute README-alpha |
| using push_dist_common, not require_file_with_macro. |
| |
| 2003-06-03 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Configure_ac.pm |
| (search_configure_ac, find_configure_ac): Rename as ... |
| (find_configure_ac, require_configure_ac): ... these. |
| * aclocal.in (scan_configure): Adjust call to require_configure_ac. |
| * automake.in (scan_autoconf_files): Likewise. |
| Suggested by Tim Van Holder. |
| |
| * alocal.in: Use Automake::Configure_ac. |
| ($configure_ac): Delete. |
| (scan_configure): Adjust use of find_configure_ac; |
| * automake.in: Use Automake::Configure_ac. |
| ($configure_ac): Delete. |
| (scan_autoconf_files): Adjust use of find_configure_ac; |
| * lib/Automake/Configure_ac.pm: New file. |
| * lib/Automake/General.pm (find_configure_ac): Delete. Now |
| replaced by Automake::Configure_ac::search_configure_ac. |
| * lib/Automake/Makefile.am (dist_perllib_DATA): Add Configure_ac.pm. |
| * lib/Automake/Variable.pm: Use Automake::Configure_ac. |
| (require_variables): Adjust use of $configure_ac. |
| |
| 2003-06-02 Akim Demaille <akim@epita.fr> |
| |
| * lib/am/texi-vers.am, lib/am/subdirs.am, lib/am/scripts.am, |
| * lib/am/remake-hdr.am, lib/am/python.am, lib/am/progs.am, |
| * lib/am/program.am, lib/am/multilib.am, lib/am/mans.am, |
| * lib/am/mans-vars.am, lib/am/ltlibrary.am, lib/am/ltlib.am, |
| * lib/am/lisp.am, lib/am/libtool.am, lib/am/library.am, |
| * lib/am/lang-compile.am, lib/am/java.am, lib/am/header.am, |
| * lib/am/header-vars.am, lib/am/footer.am, lib/am/depend.am, |
| * lib/am/dejagnu.am, lib/am/data.am, lib/am/compile.am, |
| * lib/am/clean.am, lib/am/clean-hdr.am, lib/am/check.am, |
| * lib/am/ansi2knr.am, lib/am/Makefile.am, lib/Makefile.am, |
| * m4/strip.m4, m4/sanity.m4, m4/runlog.m4, m4/regex.m4, |
| * m4/python.m4, m4/protos.m4, m4/options.m4, m4/obsolete.m4, |
| * m4/obsol-lt.m4, m4/obsol-gt.m4, m4/multi.m4, m4/missing.m4, |
| * m4/minuso.m4, m4/maintainer.m4, m4/lispdir.m4, m4/lex.m4, |
| * m4/install-sh.m4, m4/header.m4, m4/gcj.m4, m4/dmalloc.m4, |
| * m4/depout.m4, m4/cond.m4, m4/ccstdc.m4, m4/auxdir.m4, m4/as.m4, |
| * m4/Makefile.am: White space changes and Copyright updates. |
| |
| 2003-05-29 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm (check_defined_unconditionally): Add |
| the $parent_cond argument. |
| (output): Use $self->name in diagnostic not $self. |
| (variable_value_as_list): Rename as ... |
| (value_as_list): ... this. Declare as a method. Take a $parent_cond |
| argument and pass it to check_defined_unconditionally. Do not call |
| variable_assert, now that this is a method. |
| (variable_assert): Delete (unused). |
| * automake.in (traverse_variable_recursively_worker): Adjust to |
| use check_defined_unconditionally and value_as_list as a methods. |
| |
| * lib/Automake/Variable.pm (output): Declare as a method, since it |
| is only used this way. |
| (define): Fix documentation of $cond. |
| Suggested by Raja R. Harinath. |
| |
| 2003-05-25 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Variable.pm, lib/Automake/VarDef.pm: New files. |
| * lib/Automake/Makefile.am (dist_perllib_DATA): Add Variable.pm |
| and VarDef.pm. |
| * automake.in: Use Automake::Variable and Automake::VarDef. |
| (MACRO_PATTERN): Delete. Now Automake::Variable::_MACRO_PATTERN. |
| (am_macro_for_var): Delete. Now Automake::Variable::_am_macro_for_var. |
| (ac_macro_for_var): Delete. Now Automake::Variable::_ac_macro_for_var. |
| (silent_variable_override): Delete. Now |
| Automake::Variable::_silent_variable_override. |
| (var_value, var_location, var_comment, var_type, var_owner, |
| var_pretty, content_seen): Delete. This functionality is now |
| offered by Automake::Variable and Automake::VarDef. |
| (VAR_AUTOMAKE, VAR_CONFIGURE, VAR_MAKEFILE, VAR_ASIS, VAR_PRETTY): |
| Delete. Now defined in Automake::VarDef. |
| (var_order): Delete. Now Automake::Variable::_var_order. |
| (appendvar): Delete. Now Automake::Variable::_appendvar. |
| (var_SUFFIX_trigger): Register using Automake::Variable::hook. |
| (initialize_per_input): Call Automake::Variable::reset. |
| (err_var, msg_cond_var, msg_var, reject_var): Delete. Now |
| defined in Automake::Variable. |
| (generate_makefile, process_option_list, handle_languages) |
| (traverse_variable_recursively_worker) |
| (transform_variable_recursively, handle_compile) |
| (handle_libraries, handle_ltlibraries) |
| (check_typos, handle_dist, handle_subdirs, scan_autoconf_files): |
| Adjust to use Automake::Variable functions. |
| (check_ambiguous_condition): Delete. Now |
| Automake::Variable::_check_ambiguous_condition. |
| (condition_ambiguous_p): Delete. Now |
| Automake::Variable::condition_ambiguous_p. |
| (variable_not_always_defined_in_cond): Delete. Now |
| Automake::Variable::not_always_defined_in_cond. |
| (macro_define): Delete. Now Automake::Variable::define. |
| (macro_delete): Delete. Now Automake::Variable::variable_delete. |
| (macro_dump): Delete. Now Automake::Variable::variable_dump. |
| (macros_dump): Delete. Now Automake::Variable::variables_dump. |
| (variable_defined): Delete. Now |
| Automake::Variable::variable_defined, with the target check |
| temporarily disabled. |
| (variable_assert): Delete. Now Automake::Variable::variable_assert. |
| (examine_variable): Delete. Now |
| Automake::Variable::examine_variable. |
| (variable_conditions): Delete. Now Automake::Variable::conditions. |
| (scan_variable_expansions): Delete. Now |
| Automake::Variable::scan_variable_expansions. |
| (check_variable_expansions): Delete. Now |
| Automake::Variable::check_variable_expansions. |
| (check_variable_defined_unconditionally): Delete. Now |
| Automake::Variable::check_defined_unconditionally. |
| (variable_value): Delete. Now Automake::Variable::variable_value. |
| (variable_value_as_list): Delete. Now |
| Automake::Variable::variable_value_as_list. |
| (variable_value_as_list_recursive_worker): Adjust to use |
| Automake::Variable functions. |
| (variable_output): Delete. Now Automake::Variable::output. |
| (define_pretty_variable, define_configure_variable, read_am_file) |
| (define_standard_variables, read_main_am_file): Adjust to use |
| Automake::Variable functions. |
| (handle_variables): Delete. Now Automake::Variable::output_variables. |
| (file_contents_internal, am_primary_prefixes, am_install_var) |
| (require_file_with_macro, require_conf_file_with_macro) |
| (push_dist_common): : Adjust to use |
| Automake::Variable functions. |
| (require_variables): Delete. Now |
| Automake::Variable::require_variables. |
| (require_variables_for_macro): Delete. Now |
| Automake::Variable::require_variables_for_variable. |
| * tests/Makefile.am (XFAIL_TESTS): Add target.test. |
| |
| 2003-05-25 Christian Cornelssen <ccorn@cs.tu-berlin.de> (tiny change) |
| |
| * tests/dejagnu7.test: Check if runtest supports --status. |
| |
| 2003-05-23 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Location.pm (dump): Output 'INTERNAL' when position |
| is undefined. |
| |
| * lib/Automake/DisjConditions.pm (human): Fix infinite loop when |
| $self contains only one Condition. |
| |
| * automake.in: Use plain strict, including refs. |
| (macro_define, handle_single_transform_list): Use \&{'name'} to |
| build references to named subroutines. |
| |
| 2003-05-22 Karl Berry <karl@gnu.org> |
| |
| * automake.texi: Update @dircategory to match the Free Software |
| Directory. End directory entries with dots. |
| |
| 2003-05-22 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (maintainer-mode): s/François/Fran@,{c}ois/. |
| |
| * lib/elisp-comp: s/François/Franc,ois/. |
| Suggested by Paul Eggert. |
| |
| * automake.in: Move the "main" code at the end. |
| (parse_arguments): Move near the end. |
| ($KNOWN_EXTENSIONS_PATTERN, @known_extensions_list, |
| accept_extensions, var_SUFFIXES_trigger): Move these definitions |
| before any call to register_language. |
| (am_file): Move the definition with all other global variables, |
| do not use local to define it. |
| * Makefile.am (maintainer-check): Expect no `local' in Automake. |
| |
| 2003-05-21 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/Wrap.pm, lib/Automake/tests/Wrap.pl: New files. |
| * lib/Automake/Makefile.am (dist_perllib_DATA): Add Wrap.pm. |
| * lib/Automake/tests/Makefile.am (TESTS): Add Wrap.pl. |
| * automake.in (handle_texinfo_helper, pretty_print_rule) |
| (variable_output): Adjust to use makefile_wrap instead of |
| pretty_print_internal. |
| (pretty_print_internal): Remove. Renamed as Automake::Wrap::wrap |
| and augmented to accept the $eol and $max_len arguments. |
| |
| 2003-05-18 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Autom4te/XFile.pm, lib/config.guess, lib/config.sub, |
| lib/texinfo.tex: New upstream versions. |
| |
| 2003-05-17 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/install.am (install, install-exec, install-data, uninstall): |
| Declare conditionally using a if/else/endif block instead of |
| using ?SUBDIRS?-style conditions. The latter fail when |
| %maybe_BUILT_SOURCES% is replaced by several lines. |
| This fixes a bug introduced on 2003-04-06. |
| * tests/bsource.test: New file. |
| * tests/Makefile.am (TESTS): Add bsource.test. |
| Reported by Bruno Haible. |
| |
| 2003-05-11 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (renamed objects): New node. |
| (Program and Library Variables): Move maude_DEPENDENCIES closer |
| to maude_LDADD. Define and use `per-target compilation flags' in the |
| explanation for maude_CFLAGS et al. Link to the `renamed objects' |
| node. Illustrate maude_SHORTNAME. |
| |
| 2003-05-09 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/install-sh: Update copyright notice and license to that of |
| X11R6. This removes an advertising clause reported as Debian bug |
| #191717. |
| |
| 2003-05-07 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * configure.in (ACLOCAL): Do not use -I, --acdir is enough. |
| |
| * m4/make.m4: Rename the doit target as am__doit, |
| and make it phony. |
| Reported by Philip S Tellis. |
| |
| 2003-05-07 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/configure.am (%MAKEFILE-IN%): Propagate automake's exit |
| status. |
| * tests/makej.test: New file (test Autom4te's cache locking, |
| new in CVS Autoconf). |
| * tests/Makefile.am (TESTS): Add makej.test. |
| |
| 2003-05-06 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/General.pm (contents): New function. |
| * aclocal.in (greatest_mtime, force_output): New globals. |
| (scan_configure, add_file): Update $greatest_mtime. |
| (parse_arguments): Parse --force. |
| (write_aclocal): Do not overwrite $output_file unless needed. |
| * automake.texi (aclocal options): Document --force. |
| * tests/aclocal7.test: New file. |
| * tests/Makefile.am (TESTS): Add aclocal7.test. |
| |
| 2003-05-05 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (Optional): Document m4_include. |
| (Invoking aclocal): Shake a bit to introduce the various uses |
| of aclocal and explain that aclocal will use m4_include for |
| local files. |
| (Extending aclocal): Show how to install installable macros |
| in $(datadir)/aclocal, and make it clearer that writing installable |
| macros is not the only way to extend aclocal. |
| (Local Macros, Future of aclocal): New sections. |
| |
| 2003-04-27 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (@common_files): Remove acinclude.m4 since |
| it will be m4_included by aclocal.m4 and files are always |
| distributed. |
| (scan_aclocal_m4): Do not bother about acinclude.m4 anymore. |
| We will get this dependency when tracing m4_includes. |
| * tests/aclocal6.test: Make sure acinclude.m4 is distributed |
| when used. |
| * tests/acinclude.test: Delete. |
| * tests/Makefile.am (TESTS): Remove acinclude.test. |
| |
| 2003-04-25 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_configure): Don't add @configure_deps to |
| DIST_COMMON, we do this from lib/am/configure.am now. |
| Define the am__configure_deps variable instead of substituing |
| %CONFIGURE_DEPS%. |
| * lib/am/configure.am (%MAKEFILE-IN%, $(top_srcdir)/configure, |
| $(ACLOCAL_M4)): Use $(am__configure_deps) instead of %CONFIGURE_DEPS%. |
| (DIST_COMMON): Add $(am__configure_deps). |
| |
| * tests/aclocal6.test: New file. |
| * lib/am/configure.am (am--refresh): New rule. |
| (%MAKEFILE-IN%, %MAKEFILE%, $(top_builddir)/config.status, |
| $(top_srcdir)/configure): Call the top-level am--refresh from |
| subdirectories. |
| ($(ACLOCAL_M4)): Depend upon %CONFIGURE_DEPS%. Call the |
| top-level am--refresh when not in the top-level directory. |
| Fix jump directories for VPATH builds. |
| Suggested by Raja R. Harinath. |
| |
| 2003-04-24 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (scan_aclocal_m4): Do not parse ACLOCAL_AMFLAGS |
| and glob for m4_files (We've got all local m4 files while |
| tracing m4_include's). Diagnose ACLOCAL_M4_SOURCES as obsolete. |
| Distribute aclocal.m4 only at the top-level. |
| (my_glob): Remove. This fixes PR automake/11. |
| (handle_dist): Strip leading `./' from directories. |
| * aclocal.in (add_file): Output 'm4_include([file.m4])' instead |
| of copying local files. |
| (write_aclocal, parse_arguments): Bump copyright date. |
| * configure.in: De not build m4/amversion.m4 from here ... |
| * m4/Makefile.am ($(srcdir)/amversion.m4): ... do this here. |
| (nodist_m4data_DATA): Use $(srcdir)/amversion.m4 instead |
| of amversion.m4. |
| * tests/Makefile.am (XFAIL_TESTS): Remove aclocal5.test. |
| (TESTS): Remove aclocal2.test. Do not test aclocal.test twice. |
| * tests/aclocal2.test: Delete (pointless). |
| * tests/aclocal5.test: Make sure configure's dependencies are |
| distributed. |
| * tests/acinclude.test: Adjust to search for m4_include. |
| * tests/dirlist.test, tests/dup3.test: Run $AUTOCONF and grep |
| configure instead of aclocal.m4. |
| |
| For PR automake/46: |
| * automake.in (scan_aclocal_m4): Work in all directories, not only |
| the top-level. Prepend $(top_srcdir) in front of each aclocal.m4 |
| dependency. |
| * lib/am/configure.am (config.status, configure, $(ACLOCAL_M4)): |
| Define rebuild rules in each directory. |
| * tests/subdir8.test: Augment to exercise aclocal.m4's dependencies |
| from the top-level directory. |
| * tests/aclocal5.test: New file. Exercise aclocal.m4's dependencies |
| from a subdirectory. |
| * tests/Makefile.am (TESTS): Add aclocal5.test. |
| (XFAIL_TESTS): Replace subdir8.test by aclocal5.test. |
| |
| 2003-04-24 Akim Demaille <akim@epita.fr> |
| Alexandre Duret-Lutz <adl@gnu.org> |
| |
| For PR automake/46: |
| * lib/am/configure.am (%MAKEFILE-IN%): If Makefile.in is rebuilt |
| because of one of configure's dependencies, run automake without |
| argument to update the whole tree at once. Depend upon |
| %CONFIGURE_DEPS%. |
| (%MAKEFILE%): If Makefile is rebuilt because config.status has |
| been updated, run config.status without arguments. |
| * automake.in (scan_autoconf_traces): Prepend $(top_srcdir) |
| before all files in @configure_deps. |
| * tests/subdir5.test: Modernize configure.in, make sure |
| maude/Makefile was actually created, and exercise %CONFIGURE_DEPS%. |
| * tests/subdir8.test: New file. |
| * tests/Makefile.am (TESTS): Add subdir8.test. |
| (XFAIL_TESTS): Replace subdir5.test by subdir8.test. |
| |
| 2003-04-23 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (Requirements): Typo in index |
| s/AC_CONFIG_FILE/AC_CONFIG_FILES/. |
| |
| * lib/texinfo.tex: New upstream version. |
| |
| 2003-04-21 Jim Meyering <jim@meyering.net> |
| |
| * lib/mkinstalldirs: Remove each sequence of spaces before a |
| TAB character. |
| * lib/depcomp: Search for TAB-SPC, not SPC-TAB. |
| |
| 2003-04-19 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Fix for PR automake/389: |
| * automake.in (handle_configure): Don't put $colon_infile in |
| CONFIG-MAKEFILE. |
| * tests/conff.test: New file. |
| * tests/Makefile.am (TESTS): Add conff.test. |
| Reported by Alexander Turbov. |
| |
| 2003-04-18 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/defs.in: Handle required=etags to work around |
| Exuberant Ctags. |
| |
| * lib/config.guess, lib/config.sub, lib/texinfo.tex: New upstream |
| versions. |
| |
| * tests/dejagnu3.test, tests/dejagnu4.test, tests/dejagnu5.test: |
| Distribute dejagnu test cases, so that distcheck actually runs them. |
| |
| 2003-04-18 Richard Dawe <rich@phekda.freeserve.co.uk> |
| |
| * lib/am/dejagnu.am (site.exp): Don't define tool in site.exp, |
| because we set that by invoking runtest with --tool. |
| * tests/Makefile.am (TESTS): Add dejagnu4.test, dejagnu5.test, |
| dejagnu6.test, dejagnu7.test. |
| * tests/dejagnu4.test: New test. |
| * tests/dejagnu5.test: New test. |
| * tests/dejagnu6.test: New test. |
| * tests/dejagnu7.test: New test. |
| |
| * tests/dejagnu3.test: Make sure the DejaGnu test is actually run. |
| |
| 2003-04-18 Jim Meyering <jim@meyering.net> |
| |
| * automake.in (variable_output): Fix typo in comment s/is/if/. |
| |
| * lib/am/yacc.am (?!GENERIC?%OBJ% aka .y.c): Don't redirect |
| directly to $@. Instead, redirect to $@t and rename upon success. |
| Also, move the commands that update $@ so they are last. Otherwise, |
| this rule could leave the user with an up to date target (.c file) |
| but with a missing or corrupted corresponding .h file. |
| |
| 2003-04-17 Richard Dawe <rich@phekda.freeserve.co.uk> |
| |
| * tests/defs.in: Handle required=runtest, to detect runtest |
| from DejaGnu. |
| * tests/Makefile.am (TESTS): Add dejagnu3.test. |
| * tests/dejagnu3.test: New test. |
| |
| 2003-04-16 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (rule_define): If the user tries to override |
| an Automake which has a -local variant, suggest using the |
| -local variant in the -Woverride diagnostic. |
| (handle_factored_dependencies): Register factored |
| rules with rule_define, and define them only in undefined |
| conditions. |
| * tests/Makefile.am (TESTS): Add override.test. |
| * tests/overrid.test: New file. |
| * tests/phony.test: Count the number of .PHONY targets. |
| |
| 2003-04-15 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/distdir.am (distuninstallcheck, distcleancheck): Silence |
| these rules, so that we don't confuse users by echoing |
| "echo ERROR:" commands which are not run. |
| |
| 2003-03-14 Richard Dawe <rich@phekda.freeserve.co.uk> |
| Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (output_texinfo_build_rules, handle_texinfo_helper, |
| initialize_per_input): Add infrastructure for generating HTML |
| documentation from texinfo source. |
| * lib/am/texinfos.am: Add rules for building HTML documentation |
| from texinfo source. |
| * lib/am/texibuild.am: Likewise. |
| * automake.texi (Texinfo): Document rules for building |
| HTML documentation from texinfo source. |
| * tests/txinfo21.test: New file. |
| * tests/Makefile.am (TESTS): Add txinfo21.test. |
| * tests/defs.in: Handle required=makeinfo-html. |
| |
| 2003-04-14 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (%silent_variable_override): New variable. |
| (macro_define): Warn about variable definitions overriding |
| Automake variables. |
| (rule_define): Warn about target definitions overriding |
| Automake variables. Fix $condmsg definition. |
| * automake.texi (Invoking Automake): Document the `override' |
| category. |
| * lib/Automake/ChannelDefs.pm (usage): Likewise. |
| * lib/am/texinfos.am [!%?CYGNUS] (MAKEINFO): Do not define, |
| this is already done in m4/init.m4. |
| * tests/dejagnu2.test: Run $MAKE, don't only grep. Use |
| -Wno-override, and make sure we get a warning without. |
| * tests/exeext2.test, tests/substtarg.test: Use -Wno-override, |
| and make sure we get a warning without. |
| * tests/exeext3.test, tests/java2.test, tests/nolink.test, |
| tests/subpkg.test, tests/vartest.test: Use -Wno-override. |
| * tests/txinfo13.test: Use installcheck-local instead of overriding |
| installcheck. |
| * tests/txinfo2.test: Run $MAKE on the real Makefile (this test |
| used to succeed thanks to a failure...) |
| * tests/location.test: Adjust expected messages. |
| * tests/Makefile.am (XFAIL_TESTS): Add txinfo5.test. |
| |
| 2003-04-12 Raja R Harinath <harinath@acm.org> |
| |
| * lib/Automake/DisjConditions.pm (true): Don't cache answer. |
| (invert): Update comment. |
| (_simplify): Remove. |
| (simplify): Implement using invert(). |
| * lib/Automake/tests/DisjConditions.pl (test_simplify): |
| Update to reflect changes. |
| |
| 2003-04-12 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (scan_autoconf_files): Augment the error message |
| about AM_INIT_AUTOMAKE not found. |
| Suggested by Bruno Haible. |
| |
| * lib/Automake/Version.pm: New file. |
| * lib/Automake/Makefile.am (dist_perllib_DATA): Add Version.pm. |
| * lib/Automake/tests/Version.pl: New file. |
| * lib/Automake/tests/Makefile.am (TESTS): Add Version.pl. |
| * tests/Makefile.am (TESTS): Remove version5.test. |
| * tests/version5.test: Delete. Move the tests to Version.pl. |
| * automake.in (version_split, version_compare, version_check): Move ... |
| * lib/Automake/Version.pm (split, compare, check): ... here. |
| |
| 2003-04-11 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/tests/Condition.pl (test_reduce_and) |
| (test_reduce_or): Cosmetics. |
| * lib/Automake/tests/DisjConditions.pl (test_sub_conditions): |
| Fix a comment. |
| * lib/Automake/DisjConditions.pm (sub_conditions): Add missing C<...> |
| in comment. |
| * tests/yacc8.test, configure.in: Update copyright year. |
| |
| 2003-04-10 Richard Dawe <rich@phekda.freeserve.co.uk> |
| |
| * configure.in: Get the build platform name. Define |
| MODIFICATION_DELAY as the time to wait after modifying a file, |
| to cope with timestamp granularity issues, depending |
| on the platform. |
| * tests/defs.in: Define `sleep' using MODIFICATION_DELAY. |
| |
| 2003-04-10 Eric Siegerman <eric_97@pobox.com> (tiny change) |
| |
| * automake.texi (Public macros): Clarify that the new |
| AM_INIT_AUTOMAKE variant is preferred, and the old one |
| deprecated. Copy-edit the rest of the AM_INIT_AUTOMAKE item. |
| (Hello): Caution that the example uses the deprecated |
| AC_INIT/AM_INIT_AUTOMAKE syntax, and xref to the discussion. |
| |
| 2003-04-10 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Retain all variable definitions until the whole Makefile.am has |
| been processed, then output all variables in one step, at the top |
| of Makefile.in. (Older revisions used to output user variables |
| before generating Automake targets, and to mix Automake variables |
| with Automake targets, preventing redefinitions of previously |
| output variables.) |
| |
| * automake.in (%var_pretty): New variable. |
| (VAR_ASIS, VAR_PRETTY): New constants. |
| (@var_list): Rename as ... |
| (@var_order): ... this. |
| (initialize_per_input): Clear %var_pretty. |
| (handle_variables): New function, extracted from ... |
| (read_main_am_file): ... here. |
| (generate_makefile): Call handle_variable after everything else. |
| (handle_dist): Use define_pretty_variable, not pretty_print. |
| (pretty_print): Delete. |
| (macro_define): Augment with $COMMENT and $PRETTY parameters. |
| Update %var_comment, %var_pretty, and @var_order. Adjust callers. |
| (variable_pretty_output): Merge with ... |
| (variable_output): ... this, and choose the prettiness on a |
| per-condition basis. |
| (append_comments): Delete. This work is now done by macro_define. |
| (read_am_file, file_contents_internal): Don't call append_comments |
| nor update @var_list, adjust calls to macro_define. |
| (handle_subdirs): Don't explicitly output RECURSIVE_TARGETS, |
| just mark it as VAR_PRETTY. |
| * tests/exeext.test: Make sure bin_PROGRAMS is output only once. |
| Report from Jim Meyering. |
| |
| 2003-04-06 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_installdirs): Rename as ... |
| (handle_install): ... this. Define maybe_BUILT_SOURCES. |
| (generate_makefile): Adjust call to handle_install. |
| * lib/am/install.am (install): Use %maybe_BUILT_SOURCES%. |
| * automake.texi (Sources, Built sources example): BUILT_SOURCES |
| is honored by `make install' too. |
| * tests/check3.test: Make sure that `make install' also depends |
| upon BUILT_SOURCES. |
| Report from Alexander Turbov. |
| |
| * lib/am/libs.am (ARFLAGS): Define. |
| * automake.in (handle_libraries): Use `$(ARFLAGS)' instead of |
| hard-coding `cru'. |
| * automake.texi (A Library): Explain how AR, ARFLAGS and RANLIB |
| are used, and how they can be overridden. |
| (Program and Library Variables): Adjust to show `$(ARFLAGS)' |
| instead of `cru' |
| * tests/ar.test: Rewrite to test for AR, ARFLAGS, and RANLIB. |
| * tests/ranlib.test: Delete, obsoleted by ar.test. |
| * tests/Makefile.am (TESTS): Remove ranlib.test. |
| Report from Paul Thomas. |
| |
| 2003-04-03 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (check_trailing_slash): New function (variation on |
| a patch by Peter Muir). Diagnose whitespace following trailing |
| backslash. |
| (read_am_file): Use it. |
| * tests/backsl4.test: New file. |
| * tests/Makefile.am (TESTS): Add backsl4.test. |
| Reported by Peter Muir. |
| |
| 2003-03-29 Raja R Harinath <harinath@acm.org> |
| |
| Speedup Automake::DisjConditions::invert(). |
| * lib/Automake/Condition.pm (multiply): New. |
| * lib/Automake/DisjConditions.pm (_multiply): Use it. |
| (sub_conditions): Likewise. |
| |
| * lib/Automake/Condition.pm (reduce): Rename to ... |
| (reduce_and): ... this. |
| (reduce_or): New. |
| * lib/Automake/DisjConditions.pm (_multiply): Use reduce_or(). |
| * lib/Automake/tests/Condition.pl (test_reduce): Rename to ... |
| (test_reduce_and): ... this. |
| (test_reduce_or): New. |
| * lib/Automake/tests/DisjConditions.pl |
| (test_invert): Update to reflect effect of reduce_or(). |
| (test_simplify): Don't skip invert() on larger inputs. |
| |
| 2003-03-29 Raja R Harinath <harinath@cs.umn.edu> |
| |
| * tests/yacc8.test: Add a $sleep before modifying Makefile.am so |
| that timestamp will change. |
| |
| 2003-03-23 Akim Demaille <akim@epita.fr> |
| Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/tags.am (TAGS): Use --etags-include instead of --include, |
| when supported by etags (Exuberant Ctags). |
| * tests/tagsub.test: Rewrite to _run_ the `tags' rule. |
| |
| 2003-03-20 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| For Debian Bug #185388: |
| * automake.texi (Extending): Augment the install-exec-hook |
| discussion with an example how to symlink a versioned binary. |
| * tests/insthook.test: Rewrite to test the above example. |
| Report from James R. Van Zandt. |
| |
| 2003-03-19 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * Makefile.am (maintainer-check): Allow `automake:' tokens, |
| occurring in location.test. Automake now has 5 legitimate |
| unsubstituted @strings@. |
| |
| * tests/aclocal4.test: Require GNU make. |
| |
| 2003-03-14 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/aclocal4.test: New file. Test for the ACLOCAL_M4 bug below. |
| * tests/Makefile.am (TESTS): Add aclocal4.test. |
| |
| 2003-03-14 Jim Meyering <jim@meyering.net> |
| |
| * automake.in (scan_aclocal_m4): Define ACLOCAL_M4 even in |
| subdirectories. Makefile.in depends on that variable. |
| |
| 2003-03-13 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * m4/init.m4: Remove a leftover comment from the pre-1.7 era. |
| |
| Fix for PR automake/386: |
| * m4/init.m4: Require Autoconf 2.55. |
| Reported by Owen Taylor. |
| |
| * lib/am/depend2.am (?GENERIC?%EXT%.o, ?GENERIC?%EXT%.obj) |
| (?GENERIC?%EXT%.lo): Use `mv -f' instead of `mv' in FASTDEP mode. |
| Suggested by Matthias Andree. |
| |
| * tests/README: Typo. |
| |
| 2003-03-08 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/depend2.am (?GENERIC?%EXT%.o, ?GENERIC?%EXT%.obj) |
| (?GENERIC?%EXT%.lo): Hide the if/then/else machinery for FASTDEP. |
| Just echo the gcc command. |
| Suggested by Karl Berry. |
| |
| 2003-03-06 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/depend2.am (?GENERIC?%EXT%.lo): Do not use |
| `test -f foo || echo $(srcdir)/` to emulate a VPATH search when |
| outputing suffix rules. This follows 2003-02-25's change. |
| * lib/am/lex.am (?GENERIC?%EXT%%DERIVED-EXT%): Likewise. |
| * lib/am/yacc.am (?GENERIC?%EXT%%DERIVED-EXT%): Likewise. |
| |
| 2003-03-05 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (Requirements) <AC_CONFIG_FILES>: Files listed |
| with AC_CONFIG_FILES are cleaned by `make distclean'. Don't |
| pretend otherwise. |
| Reported by Rafael Laboissiere. |
| |
| 2003-03-04 Andreas Buening <andreas.buening@nexgo.de> |
| |
| * lib/mdate-sh: Find out which column of the ls -l output contains |
| the month. Do not assume it is at least the fifth column. |
| |
| 2003-02-26 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (Emacs Lisp): Mention that `dist_' can be used. |
| |
| * automake.texi (Emacs Lisp): Instruct people to use lisp_DATA |
| instead of lisp_LISP when they don't want byte-compilation. |
| Don't mention ELCFILES anymore. |
| * automake.in (handle_data): Allow lisp_DATA. |
| * tests/lisp5.test: New file. |
| * tests/Makefile.am (TESTS): Add lisp5.test. |
| |
| * automake.in (handle_emacs_lisp): Don't build *.elc files |
| if ELCFILES was set empty. |
| * tests/lisp4.test: New file. |
| * tests/Makefile.am (TESTS): Add lisp4.test. |
| Reported by Simon Josefsson. |
| |
| * tests/lex3.test, tests/lex5.test: Require flex. |
| Reported by Leo Davis. |
| |
| 2003-02-25 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/depend2.am (?GENERIC?%EXT%.o, ?GENERIC?%EXT%.obj): Do not |
| use the `test -f foo || echo $(srcdir)/` to emulate a VPATH search |
| when outputing suffix rules. |
| * lib/am/texibuild.am (?GENERIC?%SOURCE_SUFFIX%.dvi) |
| (?GENERIC?%SOURCE_SUFFIX%.pdf): Likewise. |
| Suggested by Bruno Haible. |
| |
| * automake.in (read_am_file): Catch trailing backslashes on last line. |
| * tests/backsl3.test: New file. |
| * tests/Makefile.am (TESTS): Add backsl3.test. |
| Reported by Akim Demaille. |
| |
| 2003-02-24 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * ChangeLog: Move 2002's entries to ... |
| * ChangeLog.02: ... this new file. |
| * Makefile.am (EXTRA_DIST): Add ChangeLog.02. |
| |
| 2003-02-24 Richard Dawe <rich@phekda.freeserve.co.uk> |
| |
| * tests/version7.test: Use $sleep to sleep before updating |
| the version, to work around timestamp inconsistencies in Windows. |
| |
| 2003-02-24 Bruno Haible <bruno@clisp.org> |
| Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/texibuild.am: Don't remove the target info files. Instead, |
| back up and restore them if makeinfo fails. |
| * tests/txinfo20.test: New file. |
| * tests/Makefile.am (TESTS): Add txinfo20.test. |
| |
| 2003-02-23 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (FAQ, CVS, maintainer-mode, wildcards) |
| (distcleancheck): Fix typos and other errors reported by Karl |
| Berry. |
| |
| 2003-02-20 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/texibuild.am (%SOURCE_SUFFIX%%DEST_SUFFIX%): Use $(...) |
| instead of ${...}. |
| |
| * tests/defs.in: Handle required=ro-dir. |
| * tests/destdir.test: Use this. |
| |
| 2003-02-19 Richard Dawe <rich@phekda.freeserve.co.uk> |
| |
| * lib/am/distdir.am (distcheck): Strip any leading DOS drive |
| from dc_install_base. |
| |
| 2003-02-19 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/texinfos.am (install-info-am, uninstall-info-am): Install |
| DJGPP-style *.iNN info files. |
| (maintainer-clean-aminfo): Rewrite using the same pattern |
| as in uninstall-info-am. |
| * lib/am/texibuild.am (%SOURCE_SUFFIX%%DEST_SUFFIX%): Erase |
| DJGPP-style *.iNN info files before running $(MAKEINFO). |
| * tests/txinfo19.test: New file. |
| * tests/Makefile.am (TESTS): Add txinfo19.test. |
| |
| 2003-02-18 Richard Dawe <rich@phekda.freeserve.co.uk> |
| |
| * lib/depcomp (dashmstdout): Cope with DOS filenames in |
| dependencies. |
| |
| 2003-02-17 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/depcomp (makedepend): Don't pass $object to makedepend. |
| Reported by Stepan Kasal. |
| |
| 2003-02-12 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * tests/defs.in: Handle required=makedepend. |
| |
| * Makefile.am (maintainer-check): Update the diff check |
| to account for the recent @SHELL@ substitution. |
| |
| 2003-02-11 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/depcomp: Do not put comments on the `icc)' line. |
| |
| * lib/config.guess, lib/config.sub, lib/texinfo.tex: New upstream |
| versions. |
| |
| Fix for PR automake/381: |
| * automake.in (handle_gettext): Do not print diagnostics |
| about po/ and intl/ missing from SUBDIRS if po/ does not |
| exist. Warn if `SUBDIRS = intl' is used although libintl |
| is 'external'. |
| * tests/gettext.test: Make sure diagnostics are not output |
| when po/ does not exist. |
| * tests/gettext2.test: Test for unwanted intl/. |
| PR from Alexander Turbov, fix suggested by Bruno Haible. |
| |
| * m4/depend.m4: Grep depcomp's stderr for icc warnings about |
| ignored options. |
| * lib/depcomp (icc): New mode. |
| * tests/depcomp5.test: New file. |
| * tests/defs.in: Handle required=icc. |
| * tests/Makefile.am (TESTS): Add it. |
| |
| Temporary hack for PR automake/381: |
| * automake.in (handle_gettext): Turn missing po/ and intl/ errors |
| into -Wsyntax warnings. |
| |
| 2003-02-10 Richard Dawe <rich@phekda.freeserve.co.uk> |
| |
| * Makefile.am: Substitute @SHELL@ in automake.in and aclocal.in. |
| This makes the setting of SHELL work for DJGPP. |
| |
| 2003-02-10 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| For PR automake/385: |
| * lib/depcomp (makedepend): Strip any libtool call, before |
| running makedepends. |
| * tests/depcomp4.test: New file. |
| * tests/Makefile.am (TESTS): Add it. |
| Reported by Jeff Squyres. |
| |
| Related to PR automake/385: |
| * lib/depcomp (dashmstdout): Do not use `-o /dev/null', or gcc will |
| write dependencies to /dev/null. `-o /dev/null' was added |
| on 2002-06-13 just because I tried to replace `-o foo.o' by something |
| else and didn't thought about removing it entirely. |
| * tests/depcomp3.test: New file. |
| * tests/Makefile.am (TESTS): Add it. |
| |
| * automake.in (BEGIN): Override $ENV{'SHELL'} with ./configure's |
| SHELL for DJGPP. |
| Suggested by Richard Dawe. |
| |
| 2003-02-09 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (FAQ, CVS, maintainer-mode, wildcards) |
| (distcleancheck): New nodes. |
| |
| 2003-02-06 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (scan_autoconf_files): Don't complain that |
| AM_INIT_AUTOMAKE comes from an old version if it was not found. |
| |
| 2003-02-05 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (am_install_var): Simplify filtering of |
| variable_loc_and_value_as_list_recursive's output. |
| |
| 2003-02-04 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * m4/init.m4 (_AC_AM_CONFIG_HEADER_HOOK): Recompute |
| indexes of header files so we create stamp files with |
| the right numbers when config.status is run on some headers. |
| * tests/stamph2.test: Check for this. |
| Reported by Sander Niemeijer. |
| |
| 2003-02-02 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (vars_scanned): Move near traverse_variable_recursively. |
| (traverse_variable_recursively, |
| traverse_variable_recursively_worker): Accept a $COND_FILTER argument |
| to filter out conditions during recursion. Don't recurse into |
| undefined variables. Don't pass empty results to &FUN_COLLECT. |
| (value_to_list): Remove, was used by |
| variable_value_as_list_recursive_worker only. |
| (variable_value_as_list_recursive_worker): Rewrite using |
| traverse_variable_recursively. Remove the $parent argument. |
| (variable_value_as_list_recursive, |
| variable_loc_and_value_as_list_recursive): Adjust calls |
| to variable_value_as_list_recursive_worker. Don't reset |
| %vars_scanned. |
| * tests/cond3.test: Don't expect empty helper variables, |
| we don't output them anymore. |
| * tests/cond30.test: Use an undefined variable. |
| |
| * automake.in (handle_programs): Strip $(EXEEXT) before |
| calling &check_canonical_spelling. |
| * tests/exeext.test: Make sure we don't use a |
| maude3__EXEEXT__OBJECTS variable. |
| |
| 2003-02-02 Jeremy Nimmer <jwnimmer@alum.mit.edu> (tiny change) |
| |
| For Debian Bug #39542: |
| * automake.texi (Invoking Automake, Optional): Document how |
| AC_CONFIG_AUX_DIR interacts with missing files. |
| |
| 2003-02-02 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/Automake/DisjConditions.pm (_permutations_worker) |
| (permutations): Remove, so that people aren't tempted to use it. |
| * lib/Automake/tests/DisjConditions.pl (tests_permutations): Remove. |
| |
| * automake.in (variable_conditions_recursive): Remove. |
| (variable_conditionally_defined): Rewrite using |
| traverse_variable_recursively. |
| |
| * automake.in (traverse_variable_recursively, |
| traverse_variable_recursively_worker): Pass one merged Condition |
| instead of a stack of conditions to &FUN_STORE and &FUN_COLLECT. |
| (transform_variable_recursively, define_objects_from_sources) |
| (handle_lib_objects, variable_conditions_recursive): Adjust usage. |
| |
| 2003-02-01 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_lib_objects): Compute _DEPENDENCIES variables |
| using transform_variable_recursively instead of |
| variable_conditions_recursive and variable_value_as_list_recursive |
| to avoid combinatorial explosion. |
| (handle_lib_objects_cond): Merge into handle_lib_objects. |
| * tests/cond11.test: Don't grep internal details in Makefile.in, |
| run $MAKE to make sure the resulting Makefile runs as expected. |
| * tests/cond29.test: Also exercise conditional _LDADD. |
| * tests/cond31.test, tests/cond32.test: New files. |
| * tests/Makefile.am (TESTS): Add tests/cond31.test and |
| tests/cond32.test. |
| |
| 2003-01-31 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (handle_lib_objects_cond): Ignore -dlopen and |
| -dlpreopen in _LIBADD variables too. |
| (handle_LIBOBJS, handle_ALLOCA): New functions, extracted from |
| handle_lib_objects_cond. |
| * tests/libtool7.test: New file. |
| * tests/Makefile.am (TESTS): Add libtool7.test. |
| |
| * automake.texi (Program and Library Variables): Clarify that |
| _LIBADD is for libraries and _LDADD for programs. |
| |
| * automake.in (handle_source_transform): Correct typo from 2003-01-23. |
| |
| 2003-01-28 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Fix for PR automake/352: |
| * automake.in (transform_variable_recursively): If the destination |
| and the source variables are the same, delete the source variable |
| before defining the destination variable. |
| (handle_programs): Strip any $(EXEEXT) suffix from $one_file, |
| or this will confuse handle_source_transform. |
| (append_exeext): Rewrite using transform_variable_recursively. |
| * tests/cond29.test, tests/cond30.test: New files. |
| * tests/exeext.test: Run ./configure and make, this uncovered |
| the above handle_programs issue. |
| * tests/Makefile.am (TESTS): Add cond29.test and cond20.test. |
| |
| * automake.in (%subobjvar): Replace by ... |
| (%gen_varname): ... this. |
| (subobjname): Replace by ... |
| (gen_varname): ... this. |
| (initialize_per_input): Clean gen_varname instead of subobjname. |
| (transform_variable_recursively): New function, extracted |
| from define_objects_from_sources. |
| (define_objects_from_sources): Use transform_variable_recursively. |
| Remove the unused $parent argument. |
| (handle_source_transform): Adjust call to define_objects_from_sources. |
| |
| 2003-01-23 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (@substfroms, @substtos): Move near |
| traverse_variable_recursively. |
| (traverse_variable_recursively, traverse_variable_recursively_worker): |
| New functions, extracted from define_objects_from_sources. |
| (define_objects_from_sources): Rewrite using |
| traverse_variable_recursively. |
| (handle_source_transform): Use variables_conditionally_defined |
| instead of calling variable_conditions_recursive directly. |
| Adjust the call to define_objects_from_sources; there is no need |
| to reset @substtos, @substfroms, and %vars_scanned now. |
| (variable_conditions_recursive): Rewrite using |
| traverse_variable_recursively. |
| (variable_conditions_recursive_sub): Remove. |
| (variable_conditionally_defined): Fix condition comparison (the |
| consequence was that DIST_SUBDIRS was always output). |
| * lib/Automake/Condition.pm (merge): Allow merging several |
| conditions at once. |
| |
| 2003-01-22 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.texi (Python): Explain that directory variables start |
| with either ${prefix} or ${exec_prefix}, and point to the |
| `Installation Directory Variables' section of the Autoconf manual. |
| |
| 2003-01-21 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * lib/am/distdir.am (top_distdir, distdir): Define these |
| variables only in top level Makefile. Redefine $(top_distdir) |
| as $(distdir). |
| (distdir): Fix passing of $(top_distdir) to sub-makes. |
| * automake.in (handle_dist): Do not define the DISTDIR and |
| TOP_DISTDIR transformations. We don't need them anymore. |
| * automake.texi (Dist): Reorder the dist-hook section, and move |
| the DIST_SUBDIRS paragraph earlier. Document distdir and |
| top_distdir. |
| * tests/subpkg.test: Update to check for $(distdir) and |
| $(top_distdir). |
| |
| 2003-01-19 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Rename more files to accommodate 8+3 file systems, and adjust the |
| vocabulary at the same time: AM_CONDITIONAL defines "conditionals", |
| and we call "condition" a conjunction of "conditionals". |
| * lib/am/Conditional.pm: Rename to lib/am/Condition.pm. |
| * lib/am/tests/Conditional.pl: Rename to lib/am/tests/Condition.pl. |
| * lib/am/ConditionalSet.pm: Rename to lib/am/DisjConditions.pm. |
| * lib/am/tests/ConditionalSet.pl: Rename to |
| lib/am/tests/DisjConditions.pl |
| * lib/am/Conditional.pm (condition_negate): Rename to ... |
| * lib/am/Condition.pm (conditional_negate): ... this. |
| * automake.in: Adjust references to Condition and DisjConditions. |
| (check_ambiguous_conditional, conditional_ambiguous_p): Rename to ... |
| (check_ambiguous_condition, condition_ambiguous_p): ... these. |
| |
| * tests/README: New file. |
| |
| * automake.texi (Conditional Programs): Show a sample Makefile.am. |
| Remind $(EXEEXT) must be appended to configure substitutions. |
| Show how Automake conditionals can be used instead. |
| * tests/exeext.test (check_PROGRAMS): Make sure EXEEXT is also |
| appended to conditionally defined programs. |
| |
| 2003-01-16 Jim Meyering <jim@meyering.net> |
| |
| Accept --help and --version, and lots of syntactic clean-up. |
| * lib/install-sh: Use consistent indentation, two spaces per level. |
| (scriptversion): New variable. |
| Change initializations like `variable=""' to `variable='. |
| (usage): New variable. |
| Use `test', not `['. |
| Use `test -z "$var"', not `[ x"$var" = x ]'. |
| Use `test -n "$var"', not `[ x"$var" != x ]'. |
| Alphabetize case entries. |
| Accept --help and --version options. |
| Remove unnecessary `else :' clauses. |
| Add a `Local variables' eval block to help emacs users update |
| the time-stamp variable added above. |
| Mostly from Karl Berry. |
| |
| 2003-01-16 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * m4/python.m4 (AM_PATH_PYTHON) <_AM_PYTHON_INTERPRETER_LIST>: Add |
| python2.3. |
| |
| * m4/python.m4 (AM_PATH_PYTHON): Query distutils for `pythondir' |
| or `pyexecdir', for the sake of 64-bit distributions that usually |
| use lib64/ instead of lib/. Fall back to the default directory |
| if it doesn't work. |
| Suggested by Gwenole Beauchesne. |
| |
| 2003-01-14 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| For PR automake/382: |
| * automake.texi (Yacc and Lex): Document `AM_YFLAGS = -d'. |
| Explain BUILT_SOURCES is usually needed in this case. |
| Reported by William S Fulton. |
| |
| 2003-01-13 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Rename some files for the sake of 8+3 file systems. |
| * tests/aclocali.test: Rename to tests/aclocal.test. |
| * tests/aclocali1.test: Rename to tests/aclocal2.test. |
| * tests/aclocalii.test: Rename to tests/aclocal3.test. |
| * tests/acoutput.test: Rename to tests/acoutpt.test. |
| * tests/acoutput2.test: Rename to tests/acoutpt2.test. |
| * tests/acouttbs.test: Rename to tests/acoutbs.test. |
| * tests/acouttbs2.test: Rename to tests/acoutbs2.test. |
| * tests/autoheader.test: Rename to tests/autohdr.test. |
| * tests/autoheader2.test: Rename to tests/autohdr2.test. |
| * tests/condincl.test: Rename to tests/condinc.test. |
| * tests/condincl2.test: Rename to tests/condinc2.test. |
| * tests/distcommon.test: Rename to tests/distcom.test. |
| * tests/distcommon2.test: Rename to tests/distcom2.test. |
| * tests/distcommon3.test: Rename to tests/distcom3.test. |
| * tests/installsh.test: Rename to tests/instsh.test. |
| * tests/installsh2.test: Rename to tests/instsh2.test. |
| * tests/instdata.test: Rename to tests/instdat.test. |
| * tests/instdata2.test: Rename to tests/instdat2.test. |
| * tests/libobj12b.test: Rename to tests/libobj13.test. |
| * tests/link_f_c.test: Rename to tests/link_fc.test. |
| * tests/link_f_c_cxx.test: Rename to tests/link_fccxx.test. |
| * tests/link_f_cxx.test: Rename to tests/link_fcxx.test. |
| * tests/nodefine.test: Rename to tests/nodef.test. |
| * tests/nodefine2.test: Rename to tests/nodef2.test. |
| * tests/required.test: Rename to tests/reqd.test. |
| * tests/required2.test: Rename to tests/reqd2.test. |
| * tests/sourcesub.test: Rename to tests/srcsub.test. |
| * tests/sourcesub2.test: Rename to tests/srcsub2.test. |
| * tests/specflags.test: Rename to tests/specflg.test. |
| * tests/specflags2.test: Rename to tests/specflg2.test. |
| * tests/specflags3.test: Rename to tests/specflg3.test. |
| * tests/specflags6.test: Rename to tests/specflg6.test. |
| * tests/specflags7.test: Rename to tests/specflg7.test. |
| * tests/specflags8.test: Rename to tests/specflg8.test. |
| * tests/specflags9.test: Rename to tests/specflg9.test. |
| * tests/subdircond.test: Rename to tests/subcond.test. |
| * tests/subdircond2.test: Rename to tests/subcond2.test. |
| * tests/subdircond3.test: Rename to tests/subcond3.test. |
| * tests/texinfo.test: Rename to tests/txinfo.test. |
| * tests/texinfo2.test: Rename to tests/txinfo2.test. |
| * tests/texinfo3.test: Rename to tests/txinfo3.test. |
| * tests/texinfo4.test: Rename to tests/txinfo4.test. |
| * tests/texinfo5.test: Rename to tests/txinfo5.test. |
| * tests/texinfo6.test: Rename to tests/txinfo6.test. |
| * tests/texinfo7.test: Rename to tests/txinfo7.test. |
| * tests/texinfo8.test: Rename to tests/txinfo8.test. |
| * tests/texinfo9.test: Rename to tests/txinfo9.test. |
| * tests/texinfo10.test: Rename to tests/txinfo10.test. |
| * tests/texinfo13.test: Rename to tests/txinfo13.test. |
| * tests/texinfo16.test: Rename to tests/txinfo16.test. |
| * tests/texinfo17.test: Rename to tests/txinfo17.test. |
| * tests/texinfo18.test: Rename to tests/txinfo18.test. |
| * tests/Makefile.am (TESTS): Adjust. |
| * ChangeLog.1996: Rename to ChangeLog.96. |
| * ChangeLog.1998: Rename to ChangeLog.98. |
| * ChangeLog.2000: Rename to ChangeLog.00. |
| * ChangeLog.2001: Rename to ChangeLog.01. |
| * Makefile.am (EXTRA_DIST): Adjust. |
| Reported by Richard Dawe. |
| |
| 2003-01-13 Richard Dawe <rich@phekda.freeserve.co.uk> (tiny change) |
| |
| * lib/am/distdir.am (distcheck): '=' is not valid in DOS filenames. |
| Use '_build' and '_inst' instead of '=build' and '=inst'. |
| * tests/man2.test: Reflect change automake: check for files in |
| '_build' and '_inst' directories instead of '=build' and '=inst'. |
| |
| 2003-01-13 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| Use `_dirstamp' when the file-system doesn't support `.dirstamp'. |
| * m4/lead-dot.m4: New file. |
| * m4/Makefile.am (dist_m4data_DATA): Add lead-dot.m4 |
| * m4/init.m4 (AM_INIT_AUTOMAKE): Require AM_SET_LEADING_DOT.: |
| * m4/depend.m4 (AM_SET_DEPDIR): Require AM_SET_LEADING_DOT. Define |
| DEPDIR using am__leading_dot. |
| * automake.in (require_build_directory): Define am__dirstamp, a new |
| variable for the dirstamp basename, based on am__leading_dot. |
| * tests/subobj6.test: Move all `test -f' into Makefiles, so we can |
| use $(am__dirstamp). |
| Reported by Richard Dawe. |
| |
| * tests/gnits2.test, tests/pr300-prog.test, tests/transform.test: |
| Move all `test -f' into Makefiles, so we can honor $(EXEEXT) when |
| testing for programs. |
| Reported by Richard Dawe. |
| |
| 2003-01-10 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * Makefile.am (maintainer-check): Suggest using $sleep instead of |
| sleep 2. |
| * tests/defs.in (sleep): New variable. |
| * tests/asm.test, tests/confsub.test, tests/lisp3.test, |
| tests/texinfo16.test, tests/warnopts.test, tests/yaccvpath.test: |
| Use $sleep instead of sleep 2, to work around timestamp |
| inconsistencies in Windows. |
| Reported by Richard Dawe. |
| |
| * Makefile.am (maintainer-check): Do not require SHELL=/bin/sh |
| after $MAKE -e. |
| * tests/ansi3.test, tests/ansi5.test, tests/cond22.test, |
| tests/man2.test, tests/subobj3.test, tests/suffix8.test, |
| tests/suffix11.test: Do not set SHELL=/bin/sh after $MAKE -e. |
| $SHELL is overridden by tests/defs, so it won't hurt even |
| if $MAKE -e uses the $SHELL envvar. |
| * tests/ansi.test, tests/insh2.test, tests/texinfo.test, |
| tests/texinfo8.test: Use SHELL=$SHELL, not SHELL=/bin/sh. |
| Reported by Richard Dawe. |
| |
| Build elisp files all at once instead of one by one. |
| * automake.in (handle_emacs_lisp): Define am__ELFILES. Add |
| elc-stamp to all's dependencies. |
| * lib/am/lisp.am (elc-stamp): New rule, build all *.elc files. |
| (.el.elc): Rewrite to call elc-stamp if $@ doesn't exist. |
| (clean-lisp): Clean elc-stamp. |
| * lib/elisp-comp: Reindent. Erase the temporatry directory |
| from a trap. Propagate Emacs's exit status. |
| * tests/lisp3.test: New file. |
| * tests/Makefile.am (TESTS): Add lisp3.test. |
| Reported by Ryan T. Sammartino. |
| |
| 2003-01-09 Akim Demaille <akim@epita.fr> |
| |
| * automake.texi: Prefer $(FOO) to @FOO@ in the documentation. |
| |
| 2003-01-08 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * m4/lispdir.m4: Register EMACS and EMACSLOADPATH as precious |
| variables. Suggested by Ryan T. Sammartino. |
| |
| 2003-01-05 Alexandre Duret-Lutz <adl@gnu.org> |
| |
| * automake.in (macro_define): Add missing `{$cond}' (typo from |
| 2002-09-18). |
| ($gen_copyright): Append year 2003. |
| (version): Increase year. |
| |
| * tests/defs.in: Substitute aclocaldir instead of running |
| the installed aclocal. Otherwise Libtool and Gettext |
| tests get skipped when aclocal doesn't preexist. |
| Reported by Imacat. |
| * tests/listval.test, tests/suffix2.test: Remove pointless -I |
| argument to aclocal. |
| |
| ----- |
| |
| Copyright (C) 2003-2024 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, are |
| permitted provided the copyright notice and this notice are preserved. |
