| /* Copyright (C) 1989, 1991, 1993, 1994, 1995 Aladdin Enterprises. All rights reserved. */ |
| |
| /* ansi2knr.c */ |
| /* Convert ANSI C function definitions to K&R ("traditional C") syntax */ |
| |
| /* |
| ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY. No author or distributor accepts responsibility to anyone for the |
| consequences of using it or for whether it serves any particular purpose or |
| works at all, unless he says so in writing. Refer to the GNU General Public |
| License (the "GPL") for full details. |
| |
| Everyone is granted permission to copy, modify and redistribute ansi2knr, |
| but only under the conditions described in the GPL. A copy of this license |
| is supposed to have been given to you along with ansi2knr so you can know |
| your rights and responsibilities. It should be in a file named COPYLEFT. |
| Among other things, the copyright notice and this notice must be preserved |
| on all copies. |
| |
| We explicitly state here what we believe is already implied by the GPL: if |
| the ansi2knr program is distributed as a separate set of sources and a |
| separate executable file which are aggregated on a storage medium together |
| with another program, this in itself does not bring the other program under |
| the GPL, nor does the mere fact that such a program or the procedures for |
| constructing it invoke the ansi2knr executable bring any other part of the |
| program under the GPL. |
| */ |
| |
| /* |
| * Usage: |
| ansi2knr input_file [output_file] |
| * If no output_file is supplied, output goes to stdout. |
| * There are no error messages. |
| * |
| * ansi2knr recognizes function definitions by seeing a non-keyword |
| * identifier at the left margin, followed by a left parenthesis, |
| * with a right parenthesis as the last character on the line. |
| * It will recognize a multi-line header provided that the last character |
| * of the last line of the header is a right parenthesis, |
| * and no intervening line ends with a left or right brace or a semicolon. |
| * These algorithms ignore whitespace and comments, except that |
| * the function name must be the first thing on the line. |
| * The following constructs will confuse it: |
| * - Any other construct that starts at the left margin and |
| * follows the above syntax (such as a macro or function call). |
| * - Macros that tinker with the syntax of the function header. |
| */ |
| |
| /* |
| * The original and principal author of ansi2knr is L. Peter Deutsch |
| * <ghost@aladdin.com>. Other authors are noted in the change history |
| * that follows (in reverse chronological order): |
| lpd 95-04-05 changed copyright notice to make it clear that |
| including ansi2knr in a program does not bring the entire |
| program under the GPL |
| lpd 94-12-18 added conditionals for systems where ctype macros |
| don't handle 8-bit characters properly, suggested by |
| Francois Pinard <pinard@iro.umontreal.ca>; |
| removed --varargs switch (this is now the default) |
| lpd 94-10-10 removed CONFIG_BROKETS conditional |
| lpd 94-07-16 added some conditionals to help GNU `configure', |
| suggested by Francois Pinard <pinard@iro.umontreal.ca>; |
| properly erase prototype args in function parameters, |
| contributed by Jim Avera <jima@netcom.com>; |
| correct error in writeblanks (it shouldn't erase EOLs) |
| lpd 89-xx-xx original version |
| */ |
| |
| /* Most of the conditionals here are to make ansi2knr work with */ |
| /* the GNU configure machinery. */ |
| |
| #ifdef HAVE_CONFIG_H |
| # include <config.h> |
| #endif |
| |
| #include <stdio.h> |
| #include <ctype.h> |
| |
| #ifdef HAVE_CONFIG_H |
| |
| /* |
| For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h). |
| This will define HAVE_CONFIG_H and so, activate the following lines. |
| */ |
| |
| # if STDC_HEADERS || HAVE_STRING_H |
| # include <string.h> |
| # else |
| # include <strings.h> |
| # endif |
| |
| #else /* not HAVE_CONFIG_H */ |
| |
| /* |
| Without AC_CONFIG_HEADER, merely use <string.h> as in the original |
| Ghostscript distribution. This loses on older BSD systems. |
| */ |
| |
| # include <string.h> |
| |
| #endif /* not HAVE_CONFIG_H */ |
| |
| #ifdef STDC_HEADERS |
| # include <stdlib.h> |
| #else |
| /* |
| malloc and free should be declared in stdlib.h, |
| but if you've got a K&R compiler, they probably aren't. |
| */ |
| char *malloc(); |
| void free(); |
| #endif |
| |
| /* |
| * The ctype macros don't always handle 8-bit characters correctly. |
| * Compensate for this here. |
| */ |
| #ifndef STDC_HEADERS |
| # define STDC_HEADERS 0 |
| #endif |
| #ifdef isascii |
| # undef HAVE_ISASCII /* just in case */ |
| # define HAVE_ISASCII 1 |
| #else |
| # ifndef HAVE_ISASCII |
| # define HAVE_ISASCII 0 |
| # endif |
| #endif |
| #if STDC_HEADERS || !HAVE_ISASCII |
| # define is_ascii(c) 1 |
| #else |
| # define is_ascii(c) isascii(c) |
| #endif |
| |
| #define is_space(c) (is_ascii(c) && isspace(c)) |
| #define is_alpha(c) (is_ascii(c) && isalpha(c)) |
| #define is_alnum(c) (is_ascii(c) && isalnum(c)) |
| |
| /* Scanning macros */ |
| #define isidchar(ch) (is_alnum(ch) || (ch) == '_') |
| #define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_') |
| |
| /* Forward references */ |
| char *skipspace(); |
| void writeblanks(); |
| int test1(); |
| int convert1(); |
| |
| /* The main program */ |
| int |
| main(argc, argv) |
| int argc; |
| char *argv[]; |
| { FILE *in, *out; |
| #define bufsize 5000 /* arbitrary size */ |
| char *buf; |
| char *line; |
| /* |
| * In previous versions, ansi2knr recognized a --varargs switch. |
| * If this switch was supplied, ansi2knr would attempt to convert |
| * a ... argument to va_alist and va_dcl; if this switch was not |
| * supplied, ansi2knr would simply drop any such arguments. |
| * Now, ansi2knr always does this conversion, and we only |
| * check for this switch for backward compatibility. |
| */ |
| int convert_varargs = 1; |
| |
| if ( argc > 1 && argv[1][0] == '-' ) |
| { if ( !strcmp(argv[1], "--varargs") ) |
| { convert_varargs = 1; |
| argc--; |
| argv++; |
| } |
| else |
| { fprintf(stderr, "Unrecognized switch: %s\n", argv[1]); |
| exit(1); |
| } |
| } |
| switch ( argc ) |
| { |
| default: |
| printf("Usage: ansi2knr input_file [output_file]\n"); |
| exit(0); |
| case 2: |
| out = stdout; |
| break; |
| case 3: |
| out = fopen(argv[2], "w"); |
| if ( out == NULL ) |
| { fprintf(stderr, "Cannot open output file %s\n", argv[2]); |
| exit(1); |
| } |
| } |
| in = fopen(argv[1], "r"); |
| if ( in == NULL ) |
| { fprintf(stderr, "Cannot open input file %s\n", argv[1]); |
| exit(1); |
| } |
| fprintf(out, "#line 1 \"%s\"\n", argv[1]); |
| buf = malloc(bufsize); |
| line = buf; |
| while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL ) |
| { switch ( test1(buf) ) |
| { |
| case 2: /* a function header */ |
| convert1(buf, out, 1, convert_varargs); |
| break; |
| case 1: /* a function */ |
| convert1(buf, out, 0, convert_varargs); |
| break; |
| case -1: /* maybe the start of a function */ |
| line = buf + strlen(buf); |
| if ( line != buf + (bufsize - 1) ) /* overflow check */ |
| continue; |
| /* falls through */ |
| default: /* not a function */ |
| fputs(buf, out); |
| break; |
| } |
| line = buf; |
| } |
| if ( line != buf ) fputs(buf, out); |
| free(buf); |
| fclose(out); |
| fclose(in); |
| return 0; |
| } |
| |
| /* Skip over space and comments, in either direction. */ |
| char * |
| skipspace(p, dir) |
| register char *p; |
| register int dir; /* 1 for forward, -1 for backward */ |
| { for ( ; ; ) |
| { while ( is_space(*p) ) p += dir; |
| if ( !(*p == '/' && p[dir] == '*') ) break; |
| p += dir; p += dir; |
| while ( !(*p == '*' && p[dir] == '/') ) |
| { if ( *p == 0 ) return p; /* multi-line comment?? */ |
| p += dir; |
| } |
| p += dir; p += dir; |
| } |
| return p; |
| } |
| |
| /* |
| * Write blanks over part of a string. |
| * Don't overwrite end-of-line characters. |
| */ |
| void |
| writeblanks(start, end) |
| char *start; |
| char *end; |
| { char *p; |
| for ( p = start; p < end; p++ ) |
| if ( *p != '\r' && *p != '\n' ) *p = ' '; |
| } |
| |
| /* |
| * Test whether the string in buf is a function definition. |
| * The string may contain and/or end with a newline. |
| * Return as follows: |
| * 0 - definitely not a function definition; |
| * 1 - definitely a function definition; |
| * 2 - definitely a function prototype (NOT USED); |
| * -1 - may be the beginning of a function definition, |
| * append another line and look again. |
| * The reason we don't attempt to convert function prototypes is that |
| * Ghostscript's declaration-generating macros look too much like |
| * prototypes, and confuse the algorithms. |
| */ |
| int |
| test1(buf) |
| char *buf; |
| { register char *p = buf; |
| char *bend; |
| char *endfn; |
| int contin; |
| if ( !isidfirstchar(*p) ) |
| return 0; /* no name at left margin */ |
| bend = skipspace(buf + strlen(buf) - 1, -1); |
| switch ( *bend ) |
| { |
| case ';': contin = 0 /*2*/; break; |
| case ')': contin = 1; break; |
| case '{': return 0; /* not a function */ |
| case '}': return 0; /* not a function */ |
| default: contin = -1; |
| } |
| while ( isidchar(*p) ) p++; |
| endfn = p; |
| p = skipspace(p, 1); |
| if ( *p++ != '(' ) |
| return 0; /* not a function */ |
| p = skipspace(p, 1); |
| if ( *p == ')' ) |
| return 0; /* no parameters */ |
| /* Check that the apparent function name isn't a keyword. */ |
| /* We only need to check for keywords that could be followed */ |
| /* by a left parenthesis (which, unfortunately, is most of them). */ |
| { static char *words[] = |
| { "asm", "auto", "case", "char", "const", "double", |
| "extern", "float", "for", "if", "int", "long", |
| "register", "return", "short", "signed", "sizeof", |
| "static", "switch", "typedef", "unsigned", |
| "void", "volatile", "while", 0 |
| }; |
| char **key = words; |
| char *kp; |
| int len = endfn - buf; |
| while ( (kp = *key) != 0 ) |
| { if ( strlen(kp) == len && !strncmp(kp, buf, len) ) |
| return 0; /* name is a keyword */ |
| key++; |
| } |
| } |
| return contin; |
| } |
| |
| /* Convert a recognized function definition or header to K&R syntax. */ |
| int |
| convert1(buf, out, header, convert_varargs) |
| char *buf; |
| FILE *out; |
| int header; /* Boolean */ |
| int convert_varargs; /* Boolean */ |
| { char *endfn; |
| register char *p; |
| char **breaks; |
| unsigned num_breaks = 2; /* for testing */ |
| char **btop; |
| char **bp; |
| char **ap; |
| char *vararg = 0; |
| /* Pre-ANSI implementations don't agree on whether strchr */ |
| /* is called strchr or index, so we open-code it here. */ |
| for ( endfn = buf; *(endfn++) != '('; ) ; |
| top: p = endfn; |
| breaks = (char **)malloc(sizeof(char *) * num_breaks * 2); |
| if ( breaks == 0 ) |
| { /* Couldn't allocate break table, give up */ |
| fprintf(stderr, "Unable to allocate break table!\n"); |
| fputs(buf, out); |
| return -1; |
| } |
| btop = breaks + num_breaks * 2 - 2; |
| bp = breaks; |
| /* Parse the argument list */ |
| do |
| { int level = 0; |
| char *lp = NULL; |
| char *rp; |
| char *end = NULL; |
| if ( bp >= btop ) |
| { /* Filled up break table. */ |
| /* Allocate a bigger one and start over. */ |
| free((char *)breaks); |
| num_breaks <<= 1; |
| goto top; |
| } |
| *bp++ = p; |
| /* Find the end of the argument */ |
| for ( ; end == NULL; p++ ) |
| { switch(*p) |
| { |
| case ',': |
| if ( !level ) end = p; |
| break; |
| case '(': |
| if ( !level ) lp = p; |
| level++; |
| break; |
| case ')': |
| if ( --level < 0 ) end = p; |
| else rp = p; |
| break; |
| case '/': |
| p = skipspace(p, 1) - 1; |
| break; |
| default: |
| ; |
| } |
| } |
| /* Erase any embedded prototype parameters. */ |
| if ( lp ) |
| writeblanks(lp + 1, rp); |
| p--; /* back up over terminator */ |
| /* Find the name being declared. */ |
| /* This is complicated because of procedure and */ |
| /* array modifiers. */ |
| for ( ; ; ) |
| { p = skipspace(p - 1, -1); |
| switch ( *p ) |
| { |
| case ']': /* skip array dimension(s) */ |
| case ')': /* skip procedure args OR name */ |
| { int level = 1; |
| while ( level ) |
| switch ( *--p ) |
| { |
| case ']': case ')': level++; break; |
| case '[': case '(': level--; break; |
| case '/': p = skipspace(p, -1) + 1; break; |
| default: ; |
| } |
| } |
| if ( *p == '(' && *skipspace(p + 1, 1) == '*' ) |
| { /* We found the name being declared */ |
| while ( !isidfirstchar(*p) ) |
| p = skipspace(p, 1) + 1; |
| goto found; |
| } |
| break; |
| default: goto found; |
| } |
| } |
| found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' ) |
| { if ( convert_varargs ) |
| { *bp++ = "va_alist"; |
| vararg = p-2; |
| } |
| else |
| { p++; |
| if ( bp == breaks + 1 ) /* sole argument */ |
| writeblanks(breaks[0], p); |
| else |
| writeblanks(bp[-1] - 1, p); |
| bp--; |
| } |
| } |
| else |
| { while ( isidchar(*p) ) p--; |
| *bp++ = p+1; |
| } |
| p = end; |
| } |
| while ( *p++ == ',' ); |
| *bp = p; |
| /* Make a special check for 'void' arglist */ |
| if ( bp == breaks+2 ) |
| { p = skipspace(breaks[0], 1); |
| if ( !strncmp(p, "void", 4) ) |
| { p = skipspace(p+4, 1); |
| if ( p == breaks[2] - 1 ) |
| { bp = breaks; /* yup, pretend arglist is empty */ |
| writeblanks(breaks[0], p + 1); |
| } |
| } |
| } |
| /* Put out the function name and left parenthesis. */ |
| p = buf; |
| while ( p != endfn ) putc(*p, out), p++; |
| /* Put out the declaration. */ |
| if ( header ) |
| { fputs(");", out); |
| for ( p = breaks[0]; *p; p++ ) |
| if ( *p == '\r' || *p == '\n' ) |
| putc(*p, out); |
| } |
| else |
| { for ( ap = breaks+1; ap < bp; ap += 2 ) |
| { p = *ap; |
| while ( isidchar(*p) ) |
| putc(*p, out), p++; |
| if ( ap < bp - 1 ) |
| fputs(", ", out); |
| } |
| fputs(") ", out); |
| /* Put out the argument declarations */ |
| for ( ap = breaks+2; ap <= bp; ap += 2 ) |
| (*ap)[-1] = ';'; |
| if ( vararg != 0 ) |
| { *vararg = 0; |
| fputs(breaks[0], out); /* any prior args */ |
| fputs("va_dcl", out); /* the final arg */ |
| fputs(bp[0], out); |
| } |
| else |
| fputs(breaks[0], out); |
| } |
| free((char *)breaks); |
| return 0; |
| } |
| |
| --------------1BA817596D5A |
| Content-Type: text/plain; charset=us-ascii |
| Content-Transfer-Encoding: 7bit |
| Content-Disposition: inline; filename="ansi2knr.c" |
| |
| /* Copyright (C) 1989, 1991, 1993, 1994, 1995 Aladdin Enterprises. All rights reserved. */ |
| |
| /* ansi2knr.c */ |
| /* Convert ANSI C function definitions to K&R ("traditional C") syntax */ |
| |
| /* |
| ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY. No author or distributor accepts responsibility to anyone for the |
| consequences of using it or for whether it serves any particular purpose or |
| works at all, unless he says so in writing. Refer to the GNU General Public |
| License (the "GPL") for full details. |
| |
| Everyone is granted permission to copy, modify and redistribute ansi2knr, |
| but only under the conditions described in the GPL. A copy of this license |
| is supposed to have been given to you along with ansi2knr so you can know |
| your rights and responsibilities. It should be in a file named COPYLEFT. |
| Among other things, the copyright notice and this notice must be preserved |
| on all copies. |
| |
| We explicitly state here what we believe is already implied by the GPL: if |
| the ansi2knr program is distributed as a separate set of sources and a |
| separate executable file which are aggregated on a storage medium together |
| with another program, this in itself does not bring the other program under |
| the GPL, nor does the mere fact that such a program or the procedures for |
| constructing it invoke the ansi2knr executable bring any other part of the |
| program under the GPL. |
| */ |
| |
| /* |
| * Usage: |
| ansi2knr input_file [output_file] |
| * If no output_file is supplied, output goes to stdout. |
| * There are no error messages. |
| * |
| * ansi2knr recognizes function definitions by seeing a non-keyword |
| * identifier at the left margin, followed by a left parenthesis, |
| * with a right parenthesis as the last character on the line. |
| * It will recognize a multi-line header provided that the last character |
| * of the last line of the header is a right parenthesis, |
| * and no intervening line ends with a left or right brace or a semicolon. |
| * These algorithms ignore whitespace and comments, except that |
| * the function name must be the first thing on the line. |
| * The following constructs will confuse it: |
| * - Any other construct that starts at the left margin and |
| * follows the above syntax (such as a macro or function call). |
| * - Macros that tinker with the syntax of the function header. |
| */ |
| |
| /* |
| * The original and principal author of ansi2knr is L. Peter Deutsch |
| * <ghost@aladdin.com>. Other authors are noted in the change history |
| * that follows (in reverse chronological order): |
| lpd 95-04-05 changed copyright notice to make it clear that |
| including ansi2knr in a program does not bring the entire |
| program under the GPL |
| lpd 94-12-18 added conditionals for systems where ctype macros |
| don't handle 8-bit characters properly, suggested by |
| Francois Pinard <pinard@iro.umontreal.ca>; |
| removed --varargs switch (this is now the default) |
| lpd 94-10-10 removed CONFIG_BROKETS conditional |
| lpd 94-07-16 added some conditionals to help GNU `configure', |
| suggested by Francois Pinard <pinard@iro.umontreal.ca>; |
| properly erase prototype args in function parameters, |
| contributed by Jim Avera <jima@netcom.com>; |
| correct error in writeblanks (it shouldn't erase EOLs) |
| lpd 89-xx-xx original version |
| */ |
| |
| /* Most of the conditionals here are to make ansi2knr work with */ |
| /* the GNU configure machinery. */ |
| |
| #ifdef HAVE_CONFIG_H |
| # include <config.h> |
| #endif |
| |
| #include <stdio.h> |
| #include <ctype.h> |
| |
| #ifdef HAVE_CONFIG_H |
| |
| /* |
| For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h). |
| This will define HAVE_CONFIG_H and so, activate the following lines. |
| */ |
| |
| # if STDC_HEADERS || HAVE_STRING_H |
| # include <string.h> |
| # else |
| # include <strings.h> |
| # endif |
| |
| #else /* not HAVE_CONFIG_H */ |
| |
| /* |
| Without AC_CONFIG_HEADER, merely use <string.h> as in the original |
| Ghostscript distribution. This loses on older BSD systems. |
| */ |
| |
| # include <string.h> |
| |
| #endif /* not HAVE_CONFIG_H */ |
| |
| #ifdef STDC_HEADERS |
| # include <stdlib.h> |
| #else |
| /* |
| malloc and free should be declared in stdlib.h, |
| but if you've got a K&R compiler, they probably aren't. |
| */ |
| char *malloc(); |
| void free(); |
| #endif |
| |
| /* |
| * The ctype macros don't always handle 8-bit characters correctly. |
| * Compensate for this here. |
| */ |
| #ifndef STDC_HEADERS |
| # define STDC_HEADERS 0 |
| #endif |
| #ifdef isascii |
| # undef HAVE_ISASCII /* just in case */ |
| # define HAVE_ISASCII 1 |
| #else |
| # ifndef HAVE_ISASCII |
| # define HAVE_ISASCII 0 |
| # endif |
| #endif |
| #if STDC_HEADERS || !HAVE_ISASCII |
| # define is_ascii(c) 1 |
| #else |
| # define is_ascii(c) isascii(c) |
| #endif |
| |
| #define is_space(c) (is_ascii(c) && isspace(c)) |
| #define is_alpha(c) (is_ascii(c) && isalpha(c)) |
| #define is_alnum(c) (is_ascii(c) && isalnum(c)) |
| |
| /* Scanning macros */ |
| #define isidchar(ch) (is_alnum(ch) || (ch) == '_') |
| #define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_') |
| |
| /* Forward references */ |
| char *skipspace(); |
| void writeblanks(); |
| int test1(); |
| int convert1(); |
| |
| /* The main program */ |
| int |
| main(argc, argv) |
| int argc; |
| char *argv[]; |
| { FILE *in, *out; |
| #define bufsize 5000 /* arbitrary size */ |
| char *buf; |
| char *line; |
| /* |
| * In previous versions, ansi2knr recognized a --varargs switch. |
| * If this switch was supplied, ansi2knr would attempt to convert |
| * a ... argument to va_alist and va_dcl; if this switch was not |
| * supplied, ansi2knr would simply drop any such arguments. |
| * Now, ansi2knr always does this conversion, and we only |
| * check for this switch for backward compatibility. |
| */ |
| int convert_varargs = 1; |
| |
| if ( argc > 1 && argv[1][0] == '-' ) |
| { if ( !strcmp(argv[1], "--varargs") ) |
| { convert_varargs = 1; |
| argc--; |
| argv++; |
| } |
| else |
| { fprintf(stderr, "Unrecognized switch: %s\n", argv[1]); |
| exit(1); |
| } |
| } |
| switch ( argc ) |
| { |
| default: |
| printf("Usage: ansi2knr input_file [output_file]\n"); |
| exit(0); |
| case 2: |
| out = stdout; |
| break; |
| case 3: |
| out = fopen(argv[2], "w"); |
| if ( out == NULL ) |
| { fprintf(stderr, "Cannot open output file %s\n", argv[2]); |
| exit(1); |
| } |
| } |
| in = fopen(argv[1], "r"); |
| if ( in == NULL ) |
| { fprintf(stderr, "Cannot open input file %s\n", argv[1]); |
| exit(1); |
| } |
| fprintf(out, "#line 1 \"%s\"\n", argv[1]); |
| buf = malloc(bufsize); |
| line = buf; |
| while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL ) |
| { switch ( test1(buf) ) |
| { |
| case 2: /* a function header */ |
| convert1(buf, out, 1, convert_varargs); |
| break; |
| case 1: /* a function */ |
| convert1(buf, out, 0, convert_varargs); |
| break; |
| case -1: /* maybe the start of a function */ |
| line = buf + strlen(buf); |
| if ( line != buf + (bufsize - 1) ) /* overflow check */ |
| continue; |
| /* falls through */ |
| default: /* not a function */ |
| fputs(buf, out); |
| break; |
| } |
| line = buf; |
| } |
| if ( line != buf ) fputs(buf, out); |
| free(buf); |
| fclose(out); |
| fclose(in); |
| return 0; |
| } |
| |
| /* Skip over space and comments, in either direction. */ |
| char * |
| skipspace(p, dir) |
| register char *p; |
| register int dir; /* 1 for forward, -1 for backward */ |
| { for ( ; ; ) |
| { while ( is_space(*p) ) p += dir; |
| if ( !(*p == '/' && p[dir] == '*') ) break; |
| p += dir; p += dir; |
| while ( !(*p == '*' && p[dir] == '/') ) |
| { if ( *p == 0 ) return p; /* multi-line comment?? */ |
| p += dir; |
| } |
| p += dir; p += dir; |
| } |
| return p; |
| } |
| |
| /* |
| * Write blanks over part of a string. |
| * Don't overwrite end-of-line characters. |
| */ |
| void |
| writeblanks(start, end) |
| char *start; |
| char *end; |
| { char *p; |
| for ( p = start; p < end; p++ ) |
| if ( *p != '\r' && *p != '\n' ) *p = ' '; |
| } |
| |
| /* |
| * Test whether the string in buf is a function definition. |
| * The string may contain and/or end with a newline. |
| * Return as follows: |
| * 0 - definitely not a function definition; |
| * 1 - definitely a function definition; |
| * 2 - definitely a function prototype (NOT USED); |
| * -1 - may be the beginning of a function definition, |
| * append another line and look again. |
| * The reason we don't attempt to convert function prototypes is that |
| * Ghostscript's declaration-generating macros look too much like |
| * prototypes, and confuse the algorithms. |
| */ |
| int |
| test1(buf) |
| char *buf; |
| { register char *p = buf; |
| char *bend; |
| char *endfn; |
| int contin; |
| if ( !isidfirstchar(*p) ) |
| return 0; /* no name at left margin */ |
| bend = skipspace(buf + strlen(buf) - 1, -1); |
| switch ( *bend ) |
| { |
| case ';': contin = 0 /*2*/; break; |
| case ')': contin = 1; break; |
| case '{': return 0; /* not a function */ |
| case '}': return 0; /* not a function */ |
| default: contin = -1; |
| } |
| while ( isidchar(*p) ) p++; |
| endfn = p; |
| p = skipspace(p, 1); |
| if ( *p++ != '(' ) |
| return 0; /* not a function */ |
| p = skipspace(p, 1); |
| if ( *p == ')' ) |
| return 0; /* no parameters */ |
| /* Check that the apparent function name isn't a keyword. */ |
| /* We only need to check for keywords that could be followed */ |
| /* by a left parenthesis (which, unfortunately, is most of them). */ |
| { static char *words[] = |
| { "asm", "auto", "case", "char", "const", "double", |
| "extern", "float", "for", "if", "int", "long", |
| "register", "return", "short", "signed", "sizeof", |
| "static", "switch", "typedef", "unsigned", |
| "void", "volatile", "while", 0 |
| }; |
| char **key = words; |
| char *kp; |
| int len = endfn - buf; |
| while ( (kp = *key) != 0 ) |
| { if ( strlen(kp) == len && !strncmp(kp, buf, len) ) |
| return 0; /* name is a keyword */ |
| key++; |
| } |
| } |
| return contin; |
| } |
| |
| /* Convert a recognized function definition or header to K&R syntax. */ |
| int |
| convert1(buf, out, header, convert_varargs) |
| char *buf; |
| FILE *out; |
| int header; /* Boolean */ |
| int convert_varargs; /* Boolean */ |
| { char *endfn; |
| register char *p; |
| char **breaks; |
| unsigned num_breaks = 2; /* for testing */ |
| char **btop; |
| char **bp; |
| char **ap; |
| char *vararg = 0; |
| /* Pre-ANSI implementations don't agree on whether strchr */ |
| /* is called strchr or index, so we open-code it here. */ |
| for ( endfn = buf; *(endfn++) != '('; ) ; |
| top: p = endfn; |
| breaks = (char **)malloc(sizeof(char *) * num_breaks * 2); |
| if ( breaks == 0 ) |
| { /* Couldn't allocate break table, give up */ |
| fprintf(stderr, "Unable to allocate break table!\n"); |
| fputs(buf, out); |
| return -1; |
| } |
| btop = breaks + num_breaks * 2 - 2; |
| bp = breaks; |
| /* Parse the argument list */ |
| do |
| { int level = 0; |
| char *lp = NULL; |
| char *rp; |
| char *end = NULL; |
| if ( bp >= btop ) |
| { /* Filled up break table. */ |
| /* Allocate a bigger one and start over. */ |
| free((char *)breaks); |
| num_breaks <<= 1; |
| goto top; |
| } |
| *bp++ = p; |
| /* Find the end of the argument */ |
| for ( ; end == NULL; p++ ) |
| { switch(*p) |
| { |
| case ',': |
| if ( !level ) end = p; |
| break; |
| case '(': |
| if ( !level ) lp = p; |
| level++; |
| break; |
| case ')': |
| if ( --level < 0 ) end = p; |
| else rp = p; |
| break; |
| case '/': |
| p = skipspace(p, 1) - 1; |
| break; |
| default: |
| ; |
| } |
| } |
| /* Erase any embedded prototype parameters. */ |
| if ( lp ) |
| writeblanks(lp + 1, rp); |
| p--; /* back up over terminator */ |
| /* Find the name being declared. */ |
| /* This is complicated because of procedure and */ |
| /* array modifiers. */ |
| for ( ; ; ) |
| { p = skipspace(p - 1, -1); |
| switch ( *p ) |
| { |
| case ']': /* skip array dimension(s) */ |
| case ')': /* skip procedure args OR name */ |
| { int level = 1; |
| while ( level ) |
| switch ( *--p ) |
| { |
| case ']': case ')': level++; break; |
| case '[': case '(': level--; break; |
| case '/': p = skipspace(p, -1) + 1; break; |
| default: ; |
| } |
| } |
| if ( *p == '(' && *skipspace(p + 1, 1) == '*' ) |
| { /* We found the name being declared */ |
| while ( !isidfirstchar(*p) ) |
| p = skipspace(p, 1) + 1; |
| goto found; |
| } |
| break; |
| default: goto found; |
| } |
| } |
| found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' ) |
| { if ( convert_varargs ) |
| { *bp++ = "va_alist"; |
| vararg = p-2; |
| } |
| else |
| { p++; |
| if ( bp == breaks + 1 ) /* sole argument */ |
| writeblanks(breaks[0], p); |
| else |
| writeblanks(bp[-1] - 1, p); |
| bp--; |
| } |
| } |
| else |
| { while ( isidchar(*p) ) p--; |
| *bp++ = p+1; |
| } |
| p = end; |
| } |
| while ( *p++ == ',' ); |
| *bp = p; |
| /* Make a special check for 'void' arglist */ |
| if ( bp == breaks+2 ) |
| { p = skipspace(breaks[0], 1); |
| if ( !strncmp(p, "void", 4) ) |
| { p = skipspace(p+4, 1); |
| if ( p == breaks[2] - 1 ) |
| { bp = breaks; /* yup, pretend arglist is empty */ |
| writeblanks(breaks[0], p + 1); |
| } |
| } |
| } |
| /* Put out the function name and left parenthesis. */ |
| p = buf; |
| while ( p != endfn ) putc(*p, out), p++; |
| /* Put out the declaration. */ |
| if ( header ) |
| { fputs(");", out); |
| for ( p = breaks[0]; *p; p++ ) |
| if ( *p == '\r' || *p == '\n' ) |
| putc(*p, out); |
| } |
| else |
| { for ( ap = breaks+1; ap < bp; ap += 2 ) |
| { p = *ap; |
| while ( isidchar(*p) ) |
| putc(*p, out), p++; |
| if ( ap < bp - 1 ) |
| fputs(", ", out); |
| } |
| fputs(") ", out); |
| /* Put out the argument declarations */ |
| for ( ap = breaks+2; ap <= bp; ap += 2 ) |
| (*ap)[-1] = ';'; |
| if ( vararg != 0 ) |
| { *vararg = 0; |
| fputs(breaks[0], out); /* any prior args */ |
| fputs("va_dcl", out); /* the final arg */ |
| fputs(bp[0], out); |
| } |
| else |
| fputs(breaks[0], out); |
| } |
| free((char *)breaks); |
| return 0; |
| } |