| 2010-09-06 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Internationalization tests: prefer `test ! -r' over `test ! -f' |
| We now use `test ! -r' rather than `test ! -f' to check that |
| a file does not exists (`test ! -e' would be even better, but |
| unfortunately it is unportable to e.g. Solaris /bin/sh). |
| * tests/pot-copyright.test: Prefer `test ! -r' over `test ! -f'. |
| * tests/pot-empty.test: Likewise. |
| * tests/pot-format-csharp1.test: Likewise. |
| * tests/pot-format-java1.test: Likewise. |
| * tests/pot-format-java2.test: Likewise. |
| * tests/pot-format-qt1.test: Likewise. |
| * tests/pot-format-tcl1.test: Likewise. |
| * tests/pot-linguas.test: Likewise. |
| * tests/pot-msgidbugs.test: Likewise. |
| * tests/pot-no-linguas.test: Likewise. |
| * tests/pot-noinst.test: Likewise. |
| * tests/pot-override1.test: Likewise. |
| * tests/pot-samedir.test: Likewise. |
| * tests/pot-topsrcdir.test: Likewise. |
| * tests/pot-xgettext1.test: Likewise. |
| * tests/pot-xgettext2.test: Likewise. |
| * tests/pot-xgettext3.test: Likewise. |
| * tests/pot-xgettext4.test: Likewise. |
| |
| Internationalization tests: prefer `make distdir' over `make dist'. |
| Instead of running `make dist', then uncompressing the created |
| tarball, and then grepping the uncompressed tar archive, we can |
| simply run `make distdir' and analyze the contents of the created |
| distibution directory. This is both faster and cleaner. |
| * tests/pot-msgidbugs.test: Test updated to use `make distdir' |
| instead of `make dist' where possible. |
| * tests/pot-no-linguas.test: Likewise. |
| * tests/pot-override1.test: Likewise. |
| * tests/pot-xgettext1.test: Likewise. |
| * tests/pot-xgettext2.test: Likewise. |
| * tests/pot-xgettext3.test: Likewise. |
| * tests/pot-xgettext4.test: Likewise. |
| * tests/pot-download1.test: Likewise, and check the created |
| distdir instead of the distribution tarball (which is not even |
| created anymore). |
| ($distdir): New variable. |
| * tests/pot-format-csharp1.test: Likewise. |
| * tests/pot-format-java1.test: Likewise. |
| * tests/pot-format-java2.test: Likewise. |
| * tests/pot-format-qt1.test: Likewise. |
| * tests/pot-format-tcl1.test: Likewise. |
| * tests/pot-linguas.test: Likewise. |
| * tests/pot-noinst.test: Likewise. |
| * tests/pot-samedir.test: Likewise. |
| * tests/pot-topsrcdir.test: Likewise. |
| |
| Fixlets for internationalization tests. |
| * tests/pot-copyright.test: Add trailing `:' command. Use |
| `$MAKE', not bare `make'. |
| * tests/pot-empty.test: Likewise. |
| * tests/pot-download1.test: Likewise. Use `Exit', not `exit'. |
| ($required): Remove gzip, as we must take it for granted anyway. |
| * tests/pot-format-qt1.test: Use `Exit', not `exit'. Use `$MAKE', |
| not bare `make'. Add trailing `:' command. Avoid useless use of |
| cat. Do not redirect output of grep, cmp, etc. to /dev/null. |
| Other minor cosmetic changes. |
| * tests/pot-format-java1.test: Likewise, and ... |
| ($required): Remove gzip, as we must take it for granted anyway. |
| * tests/pot-format-java2.test: Likewise. |
| * tests/pot-format-tcl1.test: Likewise. |
| * tests/pot-linguas.test: Likewise. |
| * tests/pot-noinst.test: Likewise. |
| * tests/pot-samedir.test: Likewise. |
| * tests/pot-topsrcdir.test: Likewise. |
| * tests/pot-format-csharp1.test: Likewise, and quote all literal |
| dots in grep regexps. |
| * tests/pot-enable1.test: Use `$MAKE', not bare `make'. Do not |
| redirect grep output to /dev/null. Add trailing `:' command. |
| (Makefile.am): Explicitly declare phony target as such. |
| * tests/pot-enable2.test: Likewise. |
| * tests/pot-msgidbugs.test: Use `$MAKE', not bare `make'. Avoid |
| useless use of cat. Add trailing `:' command. |
| * tests/pot-xgettext1.test: Likewise. |
| * tests/pot-xgettext2.test: Likewise. |
| * tests/pot-xgettext3.test: Likewise. |
| * tests/pot-xgettext4.test: Likewise. |
| * tests/pot-no-linguas.test: Likewise, and do not redirect grep |
| output to /dev/null. |
| * tests/pot-override1.test: Likewise. |
| * tests/pot-macro-warn.test: Avoid useless use of `AUTOMAKE_run'. |
| Add trailing `:' command. |
| * tests/pot-warn1.test: Likewise. |
| * tests/pot-warn2.test: Likewise. |
| |
| List internationalization tests in tests/Makefile.am. |
| * tests/Makefile.am (TESTS, XFAIL_TESTS): Add internationalization |
| tests `pot-*.test' introduced in previous commits. |
| |
| Make internationalization tests executable. |
| * tests/pot-macro-warn.test: Made executable. |
| * tests/pot-enable1.test: Likewise. |
| * tests/pot-enable2.test: Likewise. |
| * tests/pot-warn1.test: Likewise. |
| * tests/pot-warn2.test: Likewise. |
| * tests/pot-empty.test: Likewise. |
| * tests/pot-no-linguas.test: Likewise. |
| * tests/pot-linguas.test: Likewise. |
| * tests/pot-noinst.test: Likewise. |
| * tests/pot-topsrcdir.test: Likewise. |
| * tests/pot-samedir.test: Likewise. |
| * tests/pot-override1.test: Likewise. |
| * tests/pot-copyright.test: Likewise. |
| * tests/pot-msgidbugs.test: Likewise. |
| * tests/pot-xgettext1.test: Likewise. |
| * tests/pot-xgettext2.test: Likewise. |
| * tests/pot-xgettext3.test: Likewise. |
| * tests/pot-xgettext4.test: Likewise. |
| * tests/pot-download1.test: Likewise. |
| * tests/pot-format-qt1.test: Likewise. |
| * tests/pot-format-java1.test: Likewise. |
| * tests/pot-format-java2.test: Likewise. |
| * tests/pot-format-csharp1.test: Likewise. |
| * tests/pot-format-tcl1.test: Likewise. |
| |
| 2010-09-05 Bruno Haible <bruno@clisp.org> |
| |
| Internationalization tests. |
| * tests/pot-macro-warn.test: New file. |
| * tests/pot-enable1.test: New file. |
| * tests/pot-enable2.test: New file. |
| * tests/pot-warn1.test: New file. |
| * tests/pot-warn2.test: New file. |
| * tests/pot-empty.test: New file. |
| * tests/pot-no-linguas.test: New file. |
| * tests/pot-linguas.test: New file. |
| * tests/pot-noinst.test: New file. |
| * tests/pot-topsrcdir.test: New file. |
| * tests/pot-samedir.test: New file. |
| * tests/pot-override1.test: New file. |
| * tests/pot-copyright.test: New file. |
| * tests/pot-msgidbugs.test: New file. |
| * tests/pot-xgettext1.test: New file. |
| * tests/pot-xgettext2.test: New file. |
| * tests/pot-xgettext3.test: New file. |
| * tests/pot-xgettext4.test: New file. |
| * tests/pot-download1.test: New file. |
| * tests/pot-format-qt1.test: New file. |
| * tests/pot-format-java1.test: New file. |
| * tests/pot-format-java2.test: New file. |
| * tests/pot-format-csharp1.test: New file. |
| * tests/pot-format-tcl1.test: New file. |
| |
| 2010-08-29 Bruno Haible <bruno@clisp.org> |
| |
| Internationalization documentation changes. |
| * doc/automake.texi (A POT file's _SOURCES): Don't mention wildcards. |
| (Message catalog translations): Suggest downloaded translations as a |
| complement, not as an alternative, to included translations. |
| Suggested by Ralf Wildenhues. |
| |
| 2010-08-29 Bruno Haible <bruno@clisp.org> |
| |
| Internationalization documentation fixes. |
| * doc/automake.texi (Uniform, Internationalization): Add some more |
| index entries. |
| Reported by Ralf Wildenhues. |
| |
| 2010-08-29 Bruno Haible <bruno@clisp.org> |
| |
| Internationalization documentation fixes. |
| * doc/automake.texi (Uniform): Mention the POTS primary. |
| (Internationalization): Many small tweaks. |
| Reported by Ralf Wildenhues. |
| |
| 2010-08-15 Bruno Haible <bruno@clisp.org> |
| |
| Document the handling of POT and PO files. |
| * doc/automake.texi (Public Macros): Document AM_POT_TOOLS. |
| (Private Macros): Add AM_NLS. |
| (Internationalization): New chapter. |
| |
| 2010-08-21 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Speed up removal of auxiliary linker output files for ltlibraries. |
| * lib/am/ltlib.am (clean-%DIR%LTLIBRARIES): Rewrite using just |
| one `rm' invocation. |
| Report by Bob Friesenhahn. |
| |
| Improve robustness of mdate-sh script. |
| * lib/mdate-sh: Sanitize zsh behavior on startup, to ensure |
| $ls_command is word-split properly upon invocation. |
| (error): New function. |
| (main): Use it. Improve error checking to avoid endless loop |
| in case $ls_command gave bogus output. Fix eval quotation. |
| * tests/mdate6.test: New test, to expose eval quotation error. |
| * tests/Makefile.am: Update. |
| |
| 2010-08-18 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Fix potential regressions in depcomp{3,5}.test. |
| * tests/depcomp3.test: Do not uselessly escape the character `$' |
| in makefile rules, when it's used to expand a make macro. |
| * tests/depcomp5.test: Likewise. |
| |
| 2010-08-17 Stefano Lattarini <stefano.lattarini@gmail.com> |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Docs: clarify how to avoid automatic dependencies tracking. |
| * doc/automake.texi (Automatic dependency tracking): Mention that |
| automatic dependencies tracking is enabled by default, but that |
| the package developer can disable it altogether. Add a reference |
| to the proper section for a more in-depth explanation. |
| |
| Fix typo in manual (`Makefile.in' instead of `Makefile.am'). |
| * doc/automake.texi (Automatic dependency tracking): Fix typo. |
| |
| 2010-08-16 Bruno Haible <bruno@clisp.org> |
| |
| Don't hide the table of contents. |
| * doc/automake.texi: Move the table of contents to the beginning. |
| |
| 2010-08-16 Peter Rosin <peda@lysator.liu.se> |
| |
| Optimize compile script on MSYS. |
| * lib/compile (func_file_conv): Add new argument 'lazy' which |
| takes an optional list of conversion types where the requested |
| conversion isn't needed. |
| (func_cl_wrapper): Take advantage of the above for cases where |
| MSYS is doing the conversion for us. |
| Suggested by Ralf Wildenhues. |
| |
| 2010-08-16 Peter Rosin <peda@lysator.liu.se> |
| |
| Support more C++ file extensions for MSVC in the compile script. |
| * lib/compile (func_cl_wrapper): MSVC only recognizes the .cpp |
| file extension as C++, unless it's given a hint. So hint about |
| .cc, .CC, .cxx, .CXX, c++ and C++. Also do path conversion on |
| .c, .cpp, .CPP, .lib, .LIB and .Lib files. |
| * lib/compile3.test: Test the C++ hinting. |
| |
| 2010-08-12 Peter Rosin <peda@lysator.liu.se> |
| |
| Enable the use of "link -lib" as the wrapped archiver. |
| * lib/ar-lib: Enable the use of "link -lib" as the wrapped |
| archiver, as well as allowing some other options to be passed |
| through to the wrapped archiver. |
| * tests/ar-lib.test: Test the above. |
| |
| 2010-08-10 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Tweak and/or extend some `acloca*.test' tests. |
| * tests/aclocal8.test: Ensure verbose printing of captured |
| output. |
| * tests/aclocal.test: Likewise. Also, add trailing `:' |
| command. |
| * tests/acloca19.test: Likewise. |
| * tests/aclocal5.test: Add trailing `:' command, and prefer |
| `$me' over hard-coded test name. |
| * tests/aclocal6.test: Likewise. |
| * tests/aclocal18.test: Add trailing `:' command, and make |
| some grepping slighty stricter. |
| * tests/acloca14.test: Likewise. Also, prefer `diff' over |
| `cmp', and add some "cosmetic" blank lines. |
| |
| 2010-08-09 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Tweak and extend tests `pr[!0-9]*.test'. |
| * tests/primary3.test: Add trailing `:' command. |
| * tests/primary.test: Make grepping of Automake's stderr stricter. |
| Also, add trailing `:' command, and cosmetic changes in spacing. |
| * tests/primary2.test: Likewise. |
| * tests/prefix.test: Enable `errexit' shell flags, and related |
| changes. Add a trailing `:' command. |
| * tests/proginst.test: Likewise. |
| |
| Modernize, improve and extend tests for PR (`pr[0-9]*.test'). |
| * tests/pr2.test: Add trailing `:' command. |
| * tests/pr229.test: Likewise. |
| * tests/pr401.test: Likewise. |
| * tests/pr401b.test: Likewise. |
| * tests/pr401c.test: Likewise. |
| * tests/pr300-prog.test: Likewise, plus cosmetic changes in |
| spacing. |
| * tests/pr300-lib.test: Likewise. |
| * tests/pr300-ltlib.test: Likewise, and ensure verbose printing |
| of captured make stdout. |
| * tests/pr211.test: Add trailing `:' command. Also, use the |
| `configure.in' stub created by ./defs, rather than writing it |
| from scratch. |
| * tests/pr204.test: Likewise, plus cosmetic spacing changes. |
| * tests/pr287.test: Likewise, and move setting of `errexit' shell |
| flag earlier in the script (just after inclusion of ./defs). |
| * tests/pr220.test: Make grepping of Automake's stderr stricter. |
| Also, add trailing `:' command, and cosmetic changes in spacing. |
| * tests/pr224.test: Move setting of `errexit' shell flag earlier |
| in the script (just after inclusion of ./defs). Do not export |
| `CC=gcc' to configure explicitly (it's already exported globally |
| in ./defs, since we have "gcc" in $required). Use the stub for |
| `configure.in' created by ./defs, rather than writing it from |
| scratch. Do not create dummy files required by "gnu" mode (e.g. |
| README, NEWS), since we run automake in foreign mode anyway. |
| * tests/pr72.test: Enable `errexit' shell flags, and related |
| changes. Extend existing checks a bit. |
| * tests/pr9.test: Likewise. Also, avoid obolescent constructs in |
| the generated `configure.in', and extend existing checks over the |
| generated tarball a bit. |
| * tests/pr87.test: Enable `errexit' shell flags, and related |
| changes. Add a trailing `:' command. Also, do not create dummy |
| files required by "gnu" mode (e.g. README, NEWS), since we run |
| automake in foreign mode anyway. |
| * tests/pr243.test: Avoid obolescent constructs in the generated |
| `configure.in'. Enable the `errexit' shell flag, and related |
| changes. Cosmetic changes to spacing, add trailing `:' command, |
| and add a "FIXME" comment. |
| * tests/pr266.test: Likewise, and add explicit command line switch |
| `--enable-dependecy-tracking' to the ./configure call. |
| * tests/pr279.test: Avoid obolescent constructs in the generated |
| `configure.in'; also, use the `configure.in' stub created by |
| ./defs, rather than writing it from scratch. Enable `errexit' |
| shell flag, and related changes. Add trailing `:' command. |
| * tests/pr279-2.test: Likewise, and make grepping of Makefile.in |
| stricter. |
| * tests/pr307.test: Move setting of `errexit' shell flag earlier |
| in the script (just after inclusion of ./defs). Escape literal |
| dots in grep regular expressions. Also, add a trailing `:' |
| command, and cosmetic changes to spacing. |
| |
| Tests for PR: add excerpts from original bug report, for clarity. |
| * tests/pr2.test: Ditto. |
| * tests/pr9.test: Likewise. |
| * tests/pr72.test: Likewise. |
| * tests/pr87.test: Likewise. |
| * tests/pr211.test: Likewise. |
| * tests/pr220.test: Likewise. |
| * tests/pr224.test: Likewise. |
| * tests/pr229.test: Likewise. |
| * tests/pr243.test: Likewise. |
| * tests/pr266.test: Likewise. |
| * tests/pr279.test: Likewise, and tell to keep it in sync |
| with its sister test. |
| * tests/pr279-2.test: Likewise. |
| |
| 2010-08-08 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Tweak, extend and improve tests `cond[a-z]*.test'. |
| * tests/condd.test: Add trailing `:' command. Typofix in |
| comment. |
| * tests/condhook.test: Make sure target `install-data-hook' is |
| not called by `make install', but that data files are installed. |
| Use proper m4 quoting in configure.in. Add trailing `:' command. |
| * tests/condhook2.test: New test, sister test of condhook, with |
| inverted semantic. |
| * tests/condinc2.test: Use proper m4 quoting in configure.in. |
| Prefer trailing `:' command over trailing `Exit 0'. |
| * tests/condman2.test: Enable errexit shell flag, and related |
| changes. Add trailing `:' command. |
| * tests/condman.test: Likewise. Also, do not create useless |
| dummy manpages, and use proper m4 quoting in configure.in. |
| * tests/condman3.test: New test, similar to condman.test, but |
| it also runs ./configure and "make install", and check the |
| installed files. |
| * tests/Makefile.am (TESTS): Updated. |
| |
| Modernize, improve and/or extend tests `colon*.test. |
| * tests/colon.test: Rely on the `configure.in' stub created by |
| `./defs', rather than writing one from scratch. Do not create |
| a useless dummy file. Add trailing `:' command. |
| * tests/colon4.test: Enable the `errexit' shell flag, and |
| related changes. Rely on the `configure.in' stub created by |
| `./defs', rather than writing one from scratch. |
| * tests/colon7.test: Enable `errexit' shell flag, and related |
| changes. Improve the generated `configure.in' file. Add |
| trailing `:' command. |
| * tests/colon2.test: Likewise. Also, add some new checks. |
| * tests/colon5.test: Improve the generated `configure.in' file. |
| Add new, much deeper checks. Add trailing `:' command. |
| * tests/colon6.test: Likewise. |
| * tests/colon3.test: Add trailing `:' command. Remove useless |
| comments and echos. Improve the generated `configure.in' file. |
| make some grepping tests stricter. Add a "FIXME" comments about |
| planned improvements. |
| |
| Improve and extend tests `asm*.test'. |
| * tests/asm.test: Use configure.in stub generated by ./defs, |
| and avoid obsoleted autoconf constructs. Make grepping of |
| Automake stderr stricter. Do not create useless source file. |
| Improve verbose messages. Minor cosmetic changes. Tell to |
| keep it in sync with other sister tests asm*.test. |
| * tests/asm2.test: Likewise. |
| * tests/asm3.test: Likewise. |
| |
| Modernize, improve and/or extend test scripts `conf*.test'. |
| * tests/confh5.test: Cosmetic changes. |
| * tests/conff.test: Likewise. |
| * tests/confdeps.test: Likewise. |
| * tests/conflnk.test: Likewise. |
| * tests/conflnk2.test: Likewise. |
| * tests/confsub.test: Likewise. |
| * tests/confvar.test: Likewise, and make grepping of Makefile.in |
| stricter. |
| * tests/confvar2.test: Likewise. |
| * tests/conflnk3.test: Cosmetic changes, and re-enable a temporarly |
| disabled test (which didn't work with autoconf <= 2.59, but now we |
| are requiring autoconf 2.62, so...) |
| * tests/conflnk4.test: Cosmetic changes, and extend existing tests |
| accordingly to "TODO" comments. |
| * tests/conff2.test: Make grepping of Automake's stderr stricter. |
| Add some comments explaining why we don't use the `configure.in' |
| stub preset be ./defs. |
| * tests/confh.test: Use the `configure.in' stub created by ./defs, |
| rather than writing one from scratch, and do not call AC_OUTPUT. |
| Enable `errexit' shell flag, and related changes. Prefer diff over |
| cmp to compare text files. Prefer perl over sed to fetch the value |
| of $(DIST_COMMON) from Makefile.in. Make grepping of the contents |
| of $(DIST_COMMON) stricter. |
| * tests/confh4.test: Use the `configure.in' stub created by ./defs, |
| rather than writing one from scratch. Make grepping of Makefile.in |
| stricter. |
| * tests/confh5.test: Make grepping of `config.h' stricter. Add a |
| comment. |
| * tests/configure.test: Avoid obsolescent constructs in generated |
| `configure.ac'. Do not write `configure.in' two times. Escape |
| literal dots in grep regular expressions. |
| * tests/confincl.test: Enable `errexit' shell flag, and related |
| changes. Prefer fgrep over grep. Other cosmetic changes. |
| * tests/config.test: Renamed to ... |
| * tests/confh6.test: ... this. Fix m4 quoting in `configure.in', |
| and make grepping of `config.h' and `config.h.in' stricter. |
| * tests/conf2.test: Renamed ... |
| * tests/confh7.test: ... to this. Use the `configure.in' stub |
| created by ./defs, rather than writing one from scratch. Try to |
| run the checks both with and without AC_PROG_CC and AC_OUTPUT in |
| `configure.in'. |
| * tests/Makefile.am (TESTS): Updated. |
| |
| Minor improvements and fixes in tests `depcomp*.test'. |
| * tests/depcomp.test: Do not create useless dummy source files. |
| Add a trailing `:' command. |
| * tests/depcomp2.test: Use `unset' on the CFLAG variable to ensure |
| it's not in in the environment, rather tthan exporting it with an |
| empty value. Do not pass CC=gcc to configure, as that's already |
| done in ./defs since we have gcc in $required. Ensure verbose |
| printing of captured stderr, and normalize its checking. Add a |
| trailing `:' command. |
| * tests/depcomp3.test: Quote literal dots and dollar characters in |
| grep regexps. Always use `: >' rather than `touch' to create empty |
| files. Explicitly declare phony targets as such in the created |
| Makefile.am. Add a trailing `:' command. |
| * tests/depcomp4.test: Quote literal dots and dollar characters in |
| grep regexp. Explicitly declare phony targets as such in the |
| created Makefile.am. Ensure verbose printing of captured makes' |
| stoud/stderr. Add a trailing `:' command. |
| * tests/depcomp5.test: Move setting of `errexit' shell flag earlier |
| in the script (just after inclusion of ./defs). Quote literal dots |
| and dollar characters in grep regexps. Explicitly declare phony |
| targets as such in the created Makefile.am. Add a trailing `:' |
| command. |
| * tests/depcomp6.test: Consistenty use m4 quoting in the generated |
| configure.in. Cosmetic fixes to spacing. Make the "dummy" `if' |
| statement required by OpenBSD's sh `set -e' more robust, and add |
| explanatory comments to it. |
| * tests/depcomp7.test: Likewise, and add a trailing `:' command. |
| |
| Separate failing part of test `all.test'. |
| * tests/all.test: Keep only (x)failing part of the test. Working |
| checks moved out to ... |
| * tests/all2.test: ... this new test. |
| * tests/Makefile.am (TESTS): Updated. |
| |
| Modernize, improve and extend tests `subobj*.test'. |
| * tests/subobjname.test: Add trailing `:' command. |
| * tests/subobj.test: Make grepping of `Makefile.in' stricter. |
| Escape literal dots in grep regexps. |
| * tests/subobj2.test: Add trailing `:' command. Do not use the |
| unportable fgrep option `-e'. |
| * tests/subobj3.test: Add trailing `:' command. |
| (configure.in): Use proper m4 quoting, and avoid obsolescent |
| constructs. |
| * tests/subobj8.test: Likewise. Also, enable `errexit' shell |
| flag, with related changes |
| * tests/subobj4.test: Likewise. Also, make grepping of |
| `Makefile.in' stricter. |
| * tests/subobj5.test: Add trailing `:' command. Move setting of |
| `errexit' shell flag earlier in the script (just after inclusion |
| of ./defs). |
| (configure.in): Use the stub created by `./defs', rather than |
| writing it from scratch, and avoid obsolescent constructs. |
| * tests/subobj6.test: Add trailing `:' command. Move setting of |
| `errexit' shell flag earlier in the script (just after inclusion |
| of ./defs). Do not create useless dummy ac-init file `f'. |
| * tests/subobj7.test: Do not create useless dummy ac-init file |
| `f'. |
| (configure.in): Use the stub created by `./defs', rather than |
| writing it from scratch, and avoid obsolescent constructs. |
| * tests/subobj9.test: Move setting of `errexit' shell flag earlier |
| in the script (just after inclusion of ./defs). Fail the test if |
| `make distcheck' fails. Ensure verbose printing of captured make |
| stdout. Avoid uselsss fork by doing simple grep instead of using |
| test -n "`COMMAND | grep ...`". |
| (configure.in): Normalize the call to AC_INIT w.r.t. other tests. |
| (Makefile.am): Explicitly mark target "print" as phony. |
| * tests/subobj10.test: Removed duplicated call to `set -e'. Add |
| trailing `:' command. |
| (configure.in): Normalize the call to AC_INIT w.r.t. other tests. |
| |
| Remove a couple of obsoleted tests. |
| * tests/fpinstall.test: Removed. |
| * tests/fpinst2.test: Likewise. |
| * tests/Makefile.am (TESTS): Updated. |
| |
| Bootstrap: updated HACKING entry. |
| * HACKING ("Working with git"): Explain how to override the |
| autoconf and autom4te programs used by the bootstrap process. |
| |
| Bootstrap: fixlet. |
| * bootstrap: Do not remove `lib/Automake/Config.pm' anymore, |
| since we don't generate it. Correctly quote arguments of |
| `eval' builtin. Fixed a botched error message. Removed an |
| extra blank line. |
| |
| Bootstrap: don't search perl in $PATH. |
| * bootstrap: Do not explicitly search perl in $PATH anymore. |
| ($PATH_SEPARATOR): Removed, it's no more needed. |
| |
| Bootstrap: let the user choose which autoconf to use. |
| * bootstrap ($AUTOCONF): New variable, from the environment. |
| ($AUTOM4TE): Likewise, for clarity. |
| Use "$AUTOCONF" instead of calling "autoconf" directly. |
| |
| Minor improvements to tests ar*.test. |
| * tests/ar.test: Add trailing `:' command. |
| * tests/ar2.test: Likewise, and make grepping of generated |
| Makefile.in stricter. |
| |
| 2010-08-06 Peter Rosin <peda@lysator.liu.se> |
| |
| Add new auxiliary 'ar-lib' script, wrapping Microsoft lib. |
| * lib/ar-lib: New auxiliary script. |
| * lib/Makefile.am: Add above. |
| * tests/ar-lib.test: New test. |
| * tests/Makefile.am: Add above. |
| * automake.in (@common_files): Distribute the 'ar-lib' script. |
| * doc/automake.texi (Auxiliary Programs): Mention the new |
| 'ar-lib' script. |
| (Optional): Mention 'ar-lib' in AC_CONFIG_AUX_DIR. |
| * NEWS: Update. |
| |
| 2010-08-07 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix shell pattern negation in compile script. |
| * lib/compile (func_file_conv): Use `!' not `^' for pattern |
| negation. |
| |
| 2010-08-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix maintainer-check failure. |
| * tests/cond5.test: Quote sleep argument, this isn't about |
| time stamp differences. |
| |
| Sync auxiliary files from upstream. |
| * lib/config.guess, lib/config.sub, lib/texinfo.tex: |
| Sync from upstream. |
| |
| 2010-08-06 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Work around a nasty bug (segfault) of Solaris make. |
| * lib/am/check.am (recheck, recheck-html): Trim trailing spaces |
| from $list, to avoid triggering a nasty bug (potential segfault) |
| on Solaris make. |
| |
| 2010-08-06 Peter Rosin <peda@lysator.liu.se> |
| |
| Make cond5.test more robust on MSYS. |
| * tests/cond5.test: Add delay before the first kill attempt to |
| cater for problems with MSYS bash. |
| |
| 2010-08-01 Peter Rosin <peda@lysator.liu.se> |
| |
| Wrap some MSVC options in the compile script. |
| * lib/compile: MSVC supports naming the output file, the option |
| is just not called -o, so transform -o into the appropriate form |
| for MSVC. Also wrap some other options while at it (-L, -l, -Wl, |
| -Xlinker and -I) and convert file names to windows form where |
| needed for those options to make MSVC more usable in an |
| autotooled environment. |
| * doc/automake.texi (Auxiliary Programs): Document the above |
| extension of the compile script. |
| * NEWS: Updated. |
| * tests/defs.in: New required entry 'cl'. |
| * tests/compile3.test: New test. |
| * tests/compile4.test: New test. |
| * tests/compile5.test: New test. |
| * tests/Makefile.am: Update. |
| |
| 2010-07-31 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Add example git work flow; discuss merge --log in HACKING. |
| * HACKING: Update. |
| Suggestion by Stefano Lattarini. |
| |
| Add more hints for debugging make rules. |
| * doc/automake.texi (Debugging Make Rules): Show command to find |
| out expanded values of variables; point to makefile debugger. |
| * THANKS: Update. |
| Prompted by suggestion from Ludovic Courtès and Andy Wingo. |
| |
| 2010-07-27 Patrick Welche <prlw1@cam.ac.uk> (tiny change) |
| |
| Fix typo in the manual. |
| * doc/automake.texi (Scripts): Fix typo. |
| |
| 2010-07-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Document current policy for development with git. |
| * HACKING (Working with git): Overhaul. |
| Prompted by suggestion from Stefano Lattarini. |
| |
| Fix AM_COND_IF for gone-invalid condition shell expression. |
| * m4/cond-if.m4 (AM_COND_IF): test contents of $COND_TRUE |
| variable, rather than re-evaluating the shell expression for |
| the condition. |
| * tests/cond40.test: Extend test. |
| * NEWS: Update. |
| |
| Avoid syntax error if IF-TRUE part of AM_COND_IF expands empty. |
| * m4/cond-if.m4 (AM_COND_IF): Ensure IF-TRUE part is never empty |
| to avoid shell syntax error if the m4 expansion is empty. |
| * tests/cond40.test: Enhance test. |
| |
| Coverage: bogus option to AM_INIT_AUTOMAKE. |
| * tests/init2.test: New test. |
| * tests/Makefile.am: Update. |
| |
| 2010-07-21 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Modernize and improve test scripts `subdir*.test'. |
| * tests/subdir.test: Enable `errexit' shell flag, and related |
| changes. Use the `configure.in' stub created by `./defs', |
| rather than writing one from scratch. |
| * tests/subdir2.test: Likewise. |
| * tests/subdir4.test: Likewise. |
| * tests/subdir3.test: Enable `errexit' shell flag, and related |
| changes. Do not create useless dummy source files. |
| * tests/subdir5.test: Make grepping of Makefile.in (in topdir |
| and in subdirs) stricter. Some minor changes to keep it more |
| in sync with the related test `subdir8.test'. |
| * tests/subdir8.test: Likewise (but with the related test being |
| `subdir5.test' here). |
| * tests/subdir6.test: Cosmetic change in spacing. |
| * tests/subdir9.test: Define and use new variable `$distdir'. Add |
| trailing `:' command. |
| * tests/subdir10.test: Cosmetic consistency-related change. |
| * tests/subdirbuiltsources.test: Cosmetic changes in spacings. |
| (configure.in): Use stub created by `./defs', rather than writing |
| it from scratch. Do not use obsoleted and/or deprecated forms of |
| autoconf/automake macros. |
| |
| Modernize and improve test scripts `dist*.test'. |
| * tests/distcleancheck.test: Do not add useless `-e' option to |
| a $MAKE call. Extend test by grepping stderr of make. |
| * tests/distcom2.test: Do not run the same test script on the |
| Makefile.in twice, but save its output in an intermediate file |
| instead. Make grepping of DIST_COMMON definition stricter. |
| Display the content of more files, to ease debugging. Add a |
| trailing `:' command. Improved heading comments w.r.t. sister |
| test(s). |
| * tests/distcom6.test: Likewise, and avoid to uselessly run |
| autoconf. |
| * tests/distcom3.test: Ensure verbose printing of captured stdout |
| and stderr. Make grepping of captured stderr stricter. Also, |
| add trailing `:' command. |
| * tests/distcom4.test: Declare the target `test' in the generated |
| Makefile.am as `.PHONY'. Display content of more files, to ease |
| debugging. Add trailing `:' command. |
| * tests/distcom5.test: Likewise. Also, factor out common sed |
| script in subroutine `extract_distcommon'. |
| * tests/distcom7.test: Prefer cat + here-doc over echo to write |
| test Makefile.am files. Add a trailing `:' command. |
| * tests/distname.test: Prefer `gzip -d' over `gunzip'. Move the |
| call to `set -e' earlier. Be stricter and more verbose in the |
| checking of the generated tarball. |
| (configure.in): Use the stub provided by ./defs, instead of |
| writing it from scratch. Avoid obsoleted constructs. Remove |
| useless call to `AM_PROG_CC_C_O'. |
| * tests/distdir.test: Various minor improvements/normalizations. |
| * tests/distlinks.test: Likewise. |
| |
| 2010-07-18 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Improve and extend test cond5.test. |
| * tests/cond5.test: Do not blindly sleep 60 seconds before polling |
| the background automake process, but poll it every 10 seconds for |
| at most 30 times (this makes the test both faster on good machines, |
| and more resilient to spurious timeout-due failures when in low |
| priority or on heavily-loaded systems). |
| Check also that automake writes the expected error messages on the |
| standard error. |
| Enable `errexit' flag, and related changes. |
| Rely on the `configure.in' stub created by `./defs', rather than |
| writing one from scratch. |
| |
| 2010-06-26 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Update program --help output to match current GCS. |
| * configure.ac: Set and substitute PACKAGE_URL if AC_PACKAGE_URL |
| is not defined, for compatibility to Autoconf < 2.64. |
| * Makefile.am (do_subst): Substitute PACKAGE_BUGREPORT and |
| PACKAGE_URL. |
| (sc_diff_automake_in_automake): Update number of diff lines for |
| additional substitutions. |
| * aclocal.in (usage): Use PACKAGE_BUGREPORT. Point to Automake |
| home page and GNU general help page. |
| * automake.in (usage): Likewise. |
| * doc/automake.texi: New flag PACKAGE_BUGREPORT, to factor email |
| address. |
| (Introduction, Creating amhello, amhello Explained, Options): |
| Use it throughout. |
| * lib/Automake/Makefile.am (do_subst): Substitute |
| PACKAGE_BUGREPORT. |
| * lib/Automake/Config.in ($PACKAGE_BUGREPORT): New global. |
| * lib/Automake/ChannelDefs.pm: Use it for footer of fatal |
| messages. |
| |
| Clean up @var handling in the manual. |
| * doc/automake.texi: Throughout the manual, lower-case @var |
| names, replace a few one-character names. |
| |
| 2010-06-26 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Fix typo-related bug in test script silent5.test. |
| * tests/silent5.test: Use $EGREP, not $GREP (which is not even |
| defined). |
| |
| Tests: remove useless repetitions of `foreign' automake option. |
| * tests/multlib.test (configure.in): Remove useless use of |
| `foreign' option in AM_INIT_AUTOMAKE (the `--foreign' option is |
| already in $AUTOMAKE by default, so no point in repeating it). |
| * tests/subobj10.test: Likewise. |
| * tests/subobj9.test: Likewise. |
| * tests/lex3.test (Makefile.am): Similarly, remove useless use |
| of `foreign' option in AUTOMAKE_OPTIONS. |
| * tests/lex5.test: Likewise. |
| * tests/pr279.test: Likewise. |
| * tests/pr279-2.test: Likewise. |
| * tests/specflg3.test: Likewise. |
| * tests/target-cflags.test: Likewise. |
| |
| Drop useless requirement "gzip" in lex5.test. |
| * tests/lex5.test ($required): Do not list "gzip", as it's |
| never used. |
| |
| 2010-06-24 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Fix bugs in test script silent5.test. |
| * tests/silent5.test: Fixed a nasty bug (due to the use of grep |
| instead of egrep) that could have led to false negatives. |
| |
| 2010-06-21 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Add a test checking that distributed broken symlinks cause |
| `make dist' to fail. |
| * tests/distlinksbrk.test: New test. |
| * tests/Makefile.am (TESTS): Updated. |
| |
| 2010-06-21 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix minor testsuite issues, update docs, for Yacc/Lex changes. |
| * doc/automake.texi (Yacc and Lex): Mention AM_YFLAGS, YFLAGS |
| and AM_LFLAGS, LFLAGS in the order in which they now appear in |
| the rules. |
| * NEWS: Update. |
| * tests/lflags.test, tests/lflags2.test, tests/yflags.test, |
| tests/yflags2.test: Prefer `make -e' over `make VAR=VAL', to |
| please maintainer-check. Ensure generated C files contain a |
| declaration, to please compilers. |
| |
| 2010-06-21 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Fix bugs in Automake Yacc/Lex support w.r.t. $(AM_FLAGS) and |
| $(FLAGS) precedence. |
| * automake.in: Fix registration of languages "Lex", "Lex (C++)", |
| "Yacc" and "Yacc (C++)", so that $(LFLAGS) has precedence over |
| $(AM_LFLAGS) and $(YFLAGS) has precedence over $(AM_YFLAGS). |
| * tests/Makefile.am (XFAIL_TESTS): Updated accordingly. |
| * NEWS: Updated. |
| |
| New tests, exposing bugs in Automake Yacc/Lex support w.r.t. |
| $(AM_FLAGS) and $(FLAGS) precedence. |
| * tests/lflags.test: New test, check that user $(LFLAGS) takes |
| precedence over automake (AM_LFLAGS) and (foo_LFLAGS). Still |
| xfailing. |
| * tests/lflags2.test: Likewise. |
| * tests/yflags.test: New test, check that user $(YFLAGS) takes |
| precedence over automake (AM_YFLAGS) and (foo_YFLAGS). Still |
| xfailing. |
| * tests/yflags2.test: Likewise. |
| * tests/Makefile.am (TESTS, XFAIL_TESTS): Extended accordingly. |
| |
| 2010-06-20 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Modernize, improve and extend tests `suffix*.test'. |
| * tests/suffix3.test: Enable `errexit' shell flag, and related |
| changes. |
| * tests/suffix4.test: Likewise. |
| * tests/suffix6.test: Likewise, and do not create a useless dummy |
| source file. |
| * tests/suffix7.test: Likewise. |
| * tests/suffix5.test: Enable `errexit' shell flag, and related |
| changes. Make grepping of Makefile.in slighty stricter. |
| * tests/suffix.test: Enable `errexit' shell flag, and related |
| changes. Also, do not redirect grep output to /dev/null, as this |
| might unmotivatedly hide useful information. |
| * tests/suffix2.test: Move setting of `errexit' shell flag earlier |
| in the script (just after inclusion of ./defs). Use a more |
| idiomatic way to count text occurrences in Makefile.in with |
| grep. Do not create useless dummy source files. |
| * tests/suffix10.test: Ensure verbose printing of captured make |
| stdout. Minor cosmetic changes. |
| * tests/suffix8.test: Likewise. Also, drop useless call to the |
| env(1) utility, and make grepping of make output stricter by using |
| $FGREP rather than plain grep. |
| * tests/suffix11.test: Likewise. |
| * tests/suffix12.test: Likewise. |
| * tests/suffix9.test: Prefet cat + here-doc over echo to append to |
| the `configure.in' stub. Cosmetic changes. |
| * tests/suffix13.test: Cosmetic spacing change. |
| |
| 2010-06-13 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Add useful comment in test script ext.test. |
| * tests/ext.test: Add a comment explaining why an apparently |
| useless `if' statement is indeed required. |
| |
| 2010-06-13 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Add useful comment in test script obsolete.test. |
| * tests/obsolte.test: Add a comment explaining why we need |
| an indirection in adding $AUTOUPDATE to $required. |
| |
| Normalize whitespaces in 'tests/Makefile.am'. |
| * tests/Makefile.am (TESTS): Use only spaces, not tabs, in the |
| definition of this variable. |
| |
| Parallel tests generation: improve comments (tiny change). |
| * tests/Makefile.am ($(parallel_tests)): Added useful comment to |
| generated tests. |
| |
| Tests defs: truly get rid of `$am_defs_included' (unused variable) |
| * tests/defs.in ($am_defs_included): Remove, its now unused. It |
| should have been removed in a previous changeset, but the removal |
| was done only partially (oversight). |
| |
| 2010-06-12 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Remove a couple of unneeded conditionals from tests. |
| * tests/pr243.test, tests/pr266.test, tests/strip.test: No need |
| for the FOOTEST conditional. |
| |
| 2010-06-12 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Modernize, improve and/or fix various test scripts. |
| * tests/symlink3.test: Deleted, separated into two new, more |
| complete tests ... |
| * tests/forcemiss.test: ... this one ... |
| * tests/forcemiss2.test: ... and this one. |
| * tests/symlink2.test: Enable `errexit' shell flag, make test |
| stricter, and skip it if symlink creation is not supported. |
| * tests/postproc.test: Enable `errexit' shell flag, related |
| changes, and a couple of unrelated cosmetic changes. |
| * tests/recurs.test: Use the `configure.in' stub created by |
| `./defs', rather than writing one from scratch. Make grepping |
| of Automake stderr slighty stricter. |
| * tests/substtarg.test: Likewise. |
| * tests/strip.test: Likewise, and move the call to `set -e' |
| earlier (just after the inclusion of `./defs'). Also, make sure |
| that the script installed by `make install-script' is equal to |
| the original one. |
| * tests/substref.test: Use the `configure.in' stub created by |
| `./defs', rather than writing one from scratch. Move the call |
| to `set -e' earlier (just after the inclusion of `./defs'). |
| Avoid to explicitly export CC for configure (that's already done |
| in ./defs). Avoid potential problems with unpredictable make |
| output. Finally, make grepping of Makefile.in stricter. |
| * tests/substre2.test: Ensure verbose printing of the captured |
| make's output, and make its grepping slighty stricter. |
| * tests/cygwin32.test: Enable `errexit' shell flag, and related |
| changes. Also, do not create useless dummy source/data files. |
| * tests/scripts.test: Likewise. |
| * tests/recurs2.test: Likewise. Also, use the `configure.in' |
| stub created by `./defs'. |
| * tests/Makefile.am (TESTS): Updated. |
| |
| Modernize, improve and/or fix tests `pluseq*.test. |
| * tests/pluseq5.test: Append to configure.in using cat with an |
| here-doc, not using echo. |
| * tests/pluseq10.test: Make sure that the captured output of |
| `make' command is always displayed. Where possible, use $FGREP |
| instead of grep (this change makes some checks slighty stricter). |
| * tests/pluseq8.test: Enable `errexit' shell flag, with related |
| changes. |
| * tests/pluseq.test: Likewise. Also, do not create useless dummy |
| data files, and use better m4 quoting in generated configure.in. |
| * tests/pluseq2.test: Likewise. Also, append to configure.in |
| using cat with an here-doc, not using echo. |
| * tests/pluseq3.test: Likewise. |
| * tests/pluseq4.test: Likewise. |
| * tests/pluseq6.test: Likewise. |
| * tests/pluseq7.test: Do not create useless dummy source file. |
| * tests/pluseq9.test: Slighty extended w.r.t. the grepping of |
| Automake stderr. Some unrelated cosmetic changes. |
| |
| 2010-06-12 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| cscope.test: ensure verbose printing of captured stderr. |
| * tests/cscope.test: Print captured stderr before failing. |
| |
| 2010-06-12 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Testsuite: ensure verbose printing of captured stderr. |
| * tests/acloca18.test: Print captured stderr before either failing |
| or grepping it. Be sure to send captured stderr to stderr, not to |
| stdout. |
| * tests/ansi3b.test: Likewise. |
| * tests/cond39.test: Likewise. |
| * tests/configure.test: Likewise. |
| * tests/missing3.test: Likewise. |
| * tests/missing6.test: Likewise. |
| * tests/output-order.test: Likewise. |
| * tests/pr300-ltlib.test: Likewise. |
| * tests/python6.test: Likewise. |
| * tests/python7.test: Likewise. |
| * tests/python8.test: Likewise. |
| * tests/python9.test: Likewise. |
| * tests/subobj.test: Likewise. |
| * tests/vars3.test: Likewise. |
| * tests/missing4.test: Likewise, and fix a call to grep not to use |
| the `-c' flag. |
| * tests/ansi3.test: Likewise, and rely on the `configure.in' stub |
| created by `./defs', rather than writing one from scratch. |
| |
| Enable `errexit' shell flag in various tests. |
| * tests/backsl.test: Enable the `errexit' shell flag, and |
| related changes. |
| * tests/backsl2.test: Likewise. |
| * tests/block.test: Likewise. |
| * tests/canon2.test: Likewise. |
| * tests/canon4.test: Likewise. |
| * tests/comment2.test: Likewise. |
| * tests/condlib.test: Likewise. |
| * tests/cond15.test: Likewise, and prefer $FGREP over grep. |
| * tests/canon3.test: Likewise. Also, avoid to create an useless |
| dummy source file. |
| * tests/acoutpt2.test: Enable the `errexit' shell flag, and some |
| related changes. Do some cosmetic improvements in the generated |
| `configure.in' file. |
| * tests/cond4.test: Likewise. |
| * tests/cond14.test: Likewise. |
| * tests/condinc.test: Likewise. |
| * tests/cond7.test: Likewise. Also, remove useless setting of |
| AUTOMAKE_OPTIONS to `foreign' in the generated Makefile.am. |
| * tests/ansi.test: Enable the `errexit' shell flag, and related |
| changes. Extended, esp. by running autoconf, ./configure and |
| make, and by looking into the distdir. |
| |
| 2010-06-12 Stefano Lattarini <stefano.lattarini@gmail.com> |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Extend tests/README w.r.t. trailing `:' in test scripts. |
| * tests/README (section "Writing test cases" subsection "Do"): |
| Explain why apparently redundant trailing `:' and `Exit 0' in |
| test scripts can indeed be useful. |
| |
| 2010-06-11 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Improve determination of PATH separator in bootstrap script. |
| * bootstrap: Detemine what the PATH separator is the same way |
| autoconf does. |
| |
| Minor improvements in bootstrap script. |
| * bootstrap: Consistently use two-spaces indentation. Cosmetic |
| improvement to comments. |
| ($me): New variable, containing program basename. |
| Prepend it to all error messages. |
| |
| Testsuite now works with BSD make in parallel mode. |
| * tests/defs.in: Unset variables __MKLVL__ and MAKE_JOBS_FIFO, |
| which are exported by BSD make when run in parallel mode, and |
| which can confuse make processes spawned by our testsuite. |
| This change fixes a lot of spurious failure when the testsuite |
| is run with BSD make in parallel mode. |
| |
| 2010-06-09 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Modernize, improve and/or fix various test scripts. |
| * tests/sanity.test: Rely on the `configure.in' stub created by |
| `./defs', rather than writing one from scratch. |
| * tests/depend2.test: Likewise. Also, call `set -e' just after |
| the inclusion of `./defs', instead that later in the script. |
| * tests/canon5.test: Avoid a useless `|| Exit 1' after a call to |
| $AUTOMAKE, and improve the positioning of an $ACLOCAL call. |
| * tests/exeext4.test: Use $FGREP instead of grep, where possible. |
| Make auxiliary rules in the generated Makefile more silent. |
| These changes make some checks slighty stricter. |
| * tests/ext2.test: Call `Exit 1' if inclusion of `./defs' fails. |
| * tests/gettext2.test: Place final `:' at the end of the script, |
| rather than in the middle. |
| * tests/exeext.test: Call `set -e' just after the inclusion of |
| `./defs', instead that later in the script. |
| * tests/extra5.test: Likewise. |
| * tests/confdeps.test: Likewise. Also, prefer `mv -f' over |
| plain `mv', just to be sure. |
| * tests/depcomp.test: Enable `errexit' shell flag, with related |
| changes. Also, modernize the generated configure.in. |
| * tests/cond9.test: Likewise. Also, rely on the `configure.in' |
| stub created by `./defs', rather than writing one from scratch. |
| * tests/cond10.test: Likewise. |
| * tests/depcomp2.test: Likewise. |
| * tests/depend3.test: Likewise. |
| * tests/distcom7.test: Likewise. |
| * tests/fortdep.test: Likewise. Also, remove definition of |
| AUTOMAKE_OPTIONS to `foreign' in the generated Makefile.am, |
| since that flag is already provided by $AUTOMAKE. |
| * tests/mdate.test: Made stricter, by checking that Automake |
| actually failed, and by making a stricter grep on the error |
| message. Also, set shell `errexit flag'. |
| * tests/python2.test: Improved verbose messages. |
| |
| Make test `ammissing.test' stricter. |
| * tests/ammissing.test: Fail if $ACLOCAL succeds unexpectedly. |
| Enable `errexit' shell flag. |
| |
| 2010-06-08 Stefano Lattarini <stefano.lattarini@gmail.com> |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix error in generation of parallel tests. |
| * tests/defs.in ($am_skip_defs): New variable, to be used when |
| ./defs must be sourced multiple times. If set, unset it and |
| only define $srcdir; otherwise, also go through the rest of |
| the script. |
| ($am_defs_included): Remove, no more needed. |
| * tests/Makefile.am ($(parallel_tests)): Update accordingly, |
| using only $srcdir from defs. |
| Fixes potential test failures of tests that use $required. |
| |
| 2010-06-08 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Enable `errexit' shell flag in some test scripts. |
| * tests/subcond.test: Enabled `errexit' shell flag, and related |
| minor changes. |
| * tests/subst.test: Likewise. |
| * tests/vars.test: Likewise. |
| * tests/version4.test: Likewise. |
| * tests/vpath.test: Likewise. |
| * tests/vtexi2.test: Likewise. |
| * tests/werror.test: Likewise. |
| * tests/whoami.test: Likewise. |
| * tests/tags.test: Likewise, and avoid to crate an useless dummy |
| header file. |
| * tests/acsilent.test: Likewise, and don't use an easily-avoided |
| command substitution. |
| * tests/unused.test: Likewise, and don't use an easily-avoided |
| command substitution. |
| * tests/version.test: Likewise, and avoid deprecated constructs |
| in the generated `configure.in'. |
| * tests/version2.test: Likewise, and avoid deprecated constructs |
| in the generated `configure.in'. |
| |
| 2010-06-07 Stefano Lattarini <stefano.lattarini@gmail.com> |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Improve declaration of dependencies in the testsuite. |
| * tests/Makefile.am (check_SCRIPTS): Remove. Instead, let ... |
| ($(TEST_LOGS)): ... all test logs depend on the scripts. |
| * test/gen-parallel-tests: For each parallel test foo-p.test, |
| let `foo-p.log' also depend on `foo.test', since it is sourced. |
| |
| 2010-06-06 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Coverage for TAGS_DEPENDENCIES warning. |
| * tests/tags2.test: New test. |
| * tests/Makefile.am: Update. |
| |
| Coverage for use of anachronistic variables. |
| * tests/oldvars.test: New test. |
| * tests/Makefile.am: Update. |
| |
| Testsuite coverage for bogus macro file serial numbers. |
| * tests/acloca18.test: Also test ill-formed serial numbers |
| and serial numbers after macro definitions. |
| |
| Coverage for aclocal diagnosing underquoted macros. |
| * tests/acloca23.test: New test. |
| * tests/Makefile.am: Update. |
| |
| 2010-06-06 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Prefer AUTOMAKE_fails over `$AUTOMAKE | grep' in tests. |
| * tests/ldadd.test: Enable errexit. Use AUTOMAKE_fails so |
| the verbose log contains all output. |
| * tests/mdate.test: Likewise. |
| Prompted by Stefano Lattarini's change to discover.test. |
| |
| 2010-06-06 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| More minor message fixes. |
| * aclocal.in (scan_file): Fix recommended info command line. |
| * automake.in (handle_lib_objects): No need to prepend function |
| name to prog_error message. |
| (handle_tags): Add missing word and missing space in error |
| message. |
| (handle_dist): Add missing closing single quote in message. |
| Line-wrap one long message for readability. |
| |
| 2010-06-06 Stefano Lattarini <stefano.lattarini@gmail.com> |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix distcheck failure with distributed generated parallel tests. |
| * tests/Makefile.am ($(parallel_tests)): Cope with $(srcdir) |
| being different from the value at developer `make dist' time. |
| * tests/defs.in: Protect against mutiple inclusion, by using ... |
| ($am_defs_included): ... this new variable. |
| ($srcdir): Do not compute, but simply define to `@abs_srcdir@' |
| as substituted by configure. |
| Report, suggestions and first fix by Ralf Wildenhues, final |
| patch by Stefano Lattarini. |
| |
| 2010-06-06 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Improve tests link*.test (enable `errexit' shell flag). |
| * tests/link_c_cxx.test: Enable `errexit shell flag, and related |
| changes. Also, do not create useless source files. |
| * tests/link_dist.test: Likewise. |
| * tests/link_f90_only.test: Likewise. |
| * tests/link_f_only.test: Likewise. |
| * tests/link_fc.test: Likewise. |
| * tests/link_fccxx.test: Likewise. |
| * tests/link_fcxx.test: Likewise. |
| |
| 2010-06-06 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Improve ext.test semantics, avoid OpenBSD sh errexit issue. |
| * tests/ext.test: Inside shell compound command, use |
| `if $cmd; then Exit 1; fi' rather than `$cmd && Exit 1', to |
| fix failure with OpenBSD sh introduced with last patch. |
| Actually ensure that a rule for .EXT.o is created for each |
| known extension EXT. |
| |
| 2010-06-06 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Enable `errexit' shell flag in some test scripts. |
| * tests/dash.test: Enable `errexit' shell flag, and related |
| changes. |
| * tests/defun.test: Likewise. |
| * tests/defun2.test: Likewise. |
| * tests/dejagnu.test: Likewise. |
| * tests/double.test: Likewise. |
| * tests/distcom2.test: Likewise. |
| * tests/empty2.test: Likewise. |
| * tests/empty3.test: Likewise. |
| * tests/empty4.test: Likewise. |
| * tests/exdir.test: Likewise. |
| * tests/ext.test: Likewise. |
| * tests/extra.test: Likewise. |
| * tests/extra2.test: Likewise. |
| * tests/extra3.test: Likewise. |
| * tests/extra4.test: Likewise. |
| * tests/flibs.test: Likewise. |
| * tests/fnoc.test: Likewise. |
| * tests/fo.test: Likewise. |
| * tests/instexec.test: Likewise. |
| * tests/ltdeps.test: Likewise. |
| * tests/nodep.test: Likewise. |
| * tests/nodepcomp.test: Likewise. |
| * tests/f90only.test: Likewise, and remove botched/obsoleted |
| comments and unecessary commands. |
| * tests/fonly.test: Likewise, and remove botched/obsoleted |
| comments and unecessary commands. |
| * tests/discover.test: Likewise, and made stricter. |
| |
| Enable `errexit' shell flag in all tests cxx*.test. |
| * tests/cxx.test: Enabled `errexit' shell flag, and related |
| minor changes. |
| * tests/cxxansi.test: Likewise. |
| * tests/cxxcpp.test: Likewise. |
| * tests/cxxlibobj.test: Likewise. |
| * tests/cxxlink.test: Likewise. |
| * tests/cxxo.test: Likewise. |
| |
| Enable `errexit' shell flag in various tests. |
| * tests/acoutnoq.test: Enabled `errexit' shell flag, and related |
| minor changes. |
| * tests/acoutpt.test: Likewise. |
| * tests/acoutqnl.test: Likewise. |
| * tests/amassign.test: Likewise. |
| * tests/ansi2.test: Likewise. |
| * tests/ansi4.test: Likewise. |
| * tests/badprog.test: Likewise. |
| * tests/checkall.test: Likewise. |
| * tests/clean.test: Likewise. |
| * tests/colneq2.test: Likewise. |
| * tests/colon.test: Likewise. |
| * tests/colon5.test: Likewise. |
| * tests/colon6.test: Likewise. |
| * tests/comment.test: Likewise. |
| * tests/compile_f90_c_cxx.test: Likewise. |
| * tests/compile_f_c_cxx.test: Likewise. |
| * tests/cond3.test: Likewise. |
| * tests/cond6.test: Likewise. |
| * tests/cond13.test: Likewise. |
| * tests/conf2.test: Likewise. |
| * tests/confvar.test: Likewise. |
| * tests/confvar2.test: Likewise. |
| * tests/cond8.test: Likewise, plus a cosmetic change. |
| * tests/confh4.test: Likewise. Also, add in the heading comments |
| an excerpt from the original bug report which motivated the |
| creation of this test, to make its purpose clearer. |
| |
| 2010-06-06 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Rewrite manual to be gender-neutral. |
| * doc/automake.texi (GNU Build System) |
| (Standard Directory Variables, General Operation, CVS) |
| (Hard-Coded Install Paths, Dependencies As Side Effects): |
| Rewrite text to not contain gender-specific pronouns when |
| speaking about developers or users, either by avoiding pronouns |
| or by addressing them as `you' instead. |
| * THANKS: Update. |
| Report by Christina Gratorp. |
| |
| * AUTHORS: Update. |
| |
| 2010-06-06 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Tiny fix in silent8.test (display output of `make' command). |
| * tests/silent8.test: Make sure that the captured output of `make' |
| command is always displayed. |
| |
| Make tests on user extensibility of silent-rules mode stricter. |
| * tests/silent6.test: Made stricter w.r.t. the grepping of the |
| output produced by `make'. |
| * tests/silent7.test: Likewise. |
| |
| Tests on silent-mode for C/Libtool made stricter. |
| * tests/silent.test: Made stricter w.r.t. the grepping of the |
| output produced by `make'. |
| * tests/silent2.test: Likewise. |
| * tests/silent4.test: Likewise. |
| * tests/silent9.test: Likewise. |
| * tests/silent3.test: Likewise, and add a final `make distclean' |
| command to keep it better in sync with tests/silent{4,9}.test. |
| |
| Improved test silent5.test. |
| * tests/silent5.test: Remove by hand all generated C files after |
| non-verbose builds, to ensure the following builds are clean. |
| Try to clean and rebuild with the same verbosity and without |
| removing generated sources in between, to check that this does |
| not trigger a different set of rules. Make grepping of make's |
| output stricter. Improved/added some comments. |
| |
| New tests for Automake silent-mode with Fortran. |
| * tests/silentf77.test: New test. |
| * tests/silentf90.test: Likewise. |
| * tests/Makefile.am (TESTS): Updated accordingly. |
| |
| New test `silentcxx.test' (Automake silent-mode with C++). |
| * tests/silentcxx.test: New test. |
| * tests/Makefile.am (TESTS): Updated accordingly. |
| |
| New test `silentyacc.test' (Automake silent-mode with Yacc). |
| * tests/silentyacc.test: New test. |
| * tests/Makefile.am (TESTS): Updated accordingly. |
| |
| New test `silentlex.test' (Automake silent-mode with Lex). |
| * tests/silentlex.test: New test. |
| * tests/Makefile.am (TESTS): Updated accordingly. |
| |
| Relax tests on silent-rules to cater to overly verbose makes. |
| * tests/silent.test: When testing silent builds, don't fail if |
| make's output simply contains the `mv' substring, but only if |
| it contains the `mv ' substring (note the trailing space). |
| * tests/silent2.test: Likewise. |
| * tests/silent3.test: Likewise. |
| * tests/silent4.test: Likewise. |
| * tests/silent5.test: Likewise. |
| * tests/silent9.test: Likewise. |
| |
| 2010-05-23 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Extend test on `nostdinc' automake option. |
| * tests/nostdinc.test: Enable `errexit' shell flag. Related and |
| unrelated minor changes. Make the grepping of the generated |
| Makefile.in slighty stricter. Generate and run configure, so that |
| the generated Makefile can be grepped too. |
| |
| 2010-05-23 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Make gnupload portable to EBCDIC hosts. |
| * lib/gnupload: Use literal newline as argument for 'tr' rather |
| than \015, for EBCDIC hosts. Also, avoid unportable nested |
| double-quotes and backquotes. |
| * THANKS: Update. |
| Report from Eric Blake and Steve Goetze via gnulib. |
| |
| 2010-05-23 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Fix Autoconf version required by Automake's configure. |
| Automake configure script used to tell that automake required |
| autoconf 2.60 or later, but then it checked for autoconf >= 2.62, |
| and if that was not found, it gave an error saying that Automake |
| required configure 2.61a-341 or later. This change should |
| eliminate such inconsistencies. |
| * configure.ac ($required_autoconf_version): New variable. |
| Use it throughout. |
| |
| 2010-05-23 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix truncated comment in Makefile.am. |
| * Makefile.am (sc_tests_logs_duplicate_prefixes): Fix unfinished |
| sentence in comment. |
| Report by Stefano Lattarini. |
| |
| Relax silent8.test for NetBSD make. |
| * tests/silent8.test: Accept ./foo.info in output as well. |
| |
| Fix unportable sed script in maintainer-check test. |
| * Makefile.am (sc_tests_Exit_not_exit): Rewrite sed script to |
| not contain semicolon after 'b' or brace commands, for NetBSD. |
| |
| Wildcards are not portable to NetBSD make. |
| * doc/automake.texi (Wildcards): Document portability issue. |
| * tests/extra10.test, tests/extra11.test, tests/extra12.test: |
| Require GNU make. |
| |
| 2010-05-23 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Make test for configure.in vs. configure.ac stricter. |
| * tests/configure.test: Use a configure.in file that provokes |
| an automake error, to ensure configure.ac is preferred. |
| |
| Avoid possible false negatives in dejagnu7.test. |
| * tests/dejagnu7.test: Enable shell `errexit' flag. Also, avoid |
| unportable use of fgrep option `-e'. |
| |
| Fix conflnk3.test to work with Solaris/Heirloom Sh. |
| * tests/conflnk3.test: Use `test -r FILE' and `test ! -r FILE' |
| instead of respectively `test -e FILE' and `test ! -e FILE', |
| since Solaris Sh doesn't grok the latter. Do not SKIP the test |
| if the shell doesn't support `test -e'. |
| |
| 2010-04-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Warning and error message formatting cleanups. |
| * aclocal.in (parse_arguments, main): Remove trailing period or |
| newline in error or warning messages, avoid capitalization of |
| the first word of a message. |
| * automake.in (check_user_variables, handle_languages) |
| (handle_ltlibraries, scan_aclocal_m4, scan_autoconf_config_files) |
| (scan_autoconf_files, cond_stack_if, require_file_internal) |
| (usage, generate_makefile, parse_arguments): Likewise. |
| * lib/Automake/ChannelDefs.pm (set_strictness): Likewise. |
| * lib/Automake/Configure_ac.pm (find_configure_ac): Likewise. |
| * lib/Automake/Options.pm (set_strictness): Likewise. |
| * lib/Automake/Rule.pm (define): Likewise. |
| * lib/Automake/Variable.pm (define, variables_dump): Likewise. |
| * tests/ltinstloc.test, tests/suffix11.test: Adjust expected |
| error message. |
| * lib/Automake/Channels.pm (setup_channel): Reword error message |
| to be the same as in msg. |
| |
| Fix placing of ellipses in English text and synopses. |
| * Makefile.am: Be sure to add a space before `...' in natural |
| language text. |
| * automake.in (scan_autoconf_traces): Likewise. |
| * lib/Automake/Rule.pm (define): Likewise. |
| * lib/Automake/Variable.pm (define): Likewise. |
| * lib/am/dejagnu.am: Likewise. |
| * lib/am/progs.am: Likewise. |
| * lib/gnupload (dprint, upload): Likewise. |
| * tests/confdeps.test: Likewise. |
| * tests/location.test: Adjust expected output. |
| * automake.in (usage): In synopsis, use singular for OPTION, |
| * remove space before ellipsis. |
| * aclocal.in (usage): Likewise. Also, fix indentation. |
| |
| Fix more duplicate message prefixes. |
| * lib/Automake/XFile.pm (seek): Do not prepend $me. |
| ($me): Remove now-unused package-global. |
| * aclocal.in (check_acinclude): Remove duplicate 'warning: ' |
| prefix. |
| |
| Fix typo in manual. |
| * doc/automake.texi (Simple Tests using parallel-tests): Add |
| missing closing parenthesis. |
| |
| Fix leftover call to removed function macros_dump. |
| * automake.in (read_main_am_file): Call variables_dump, not |
| macros_dump. Print actual error before list of variables. |
| |
| 2010-04-22 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Minor improvements in comments of test `silent3.test'. |
| * tests/silent3.test: Tell to keep it in sync with `silent9.test' |
| too. |
| |
| 2010-04-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| testsuite: ensure verbose printing of captured output. |
| * tests/acloca14.test, tests/acloca18.test, tests/aclocal.test, |
| tests/fort2.test, tests/help.test, tests/missing3.test, |
| tests/missing6.test: Print captured stdout or stderr before |
| grepping it. |
| |
| 2010-04-20 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Make test badopt.test stricter (by enabling `set -e'). |
| * tests/badopt.test: Add call to `set -e'. Due to this change, |
| an unexpected failure in the call to `$ACLOCAL' (whose outcome |
| was previously unchecked) would cause the whole test to fail. |
| Also, bumped the copyright years. |
| |
| Make test for configure.in vs. configure.ac stricter. |
| * tests/configure.test: Use a configure.in file that provokes |
| an automake error, to ensure configure.ac is preferred. |
| |
| Use `set -e' in confsub.test (avoids possible false negatives). |
| * tests/confsub.test: Enable shell `errexit' flag, and related |
| changes (this helps avoiding some possible minor false negatives). |
| Also, bumped copyright years. |
| |
| 2010-04-20 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix -Werror handling for presence of configure.in and configure.ac. |
| * lib/Automake/Variable.pm (Automake::Variable): Do not initialize |
| $configure_ac at the global level, before command-line arguments |
| have been parsed. |
| (require_variables): Initialize it here. |
| * tests/configure.test: New test. |
| * tests/Makefile.am: Update. |
| Report by Stefano Lattarini. |
| |
| 2010-04-20 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Avoid possible false negatives in confh5.test. |
| * tests/confh5.test: Enable shell `errexit' flag, and bumped |
| copyright years. Due to this change, any unexpected failure |
| in calls to $ACLOCAL, $AUTOMAKE, $AUTOCONF or $AUTOHEADER, or |
| a failure in grepping expected text in output files should now |
| cause the whole test to fail. |
| |
| 2010-04-17 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Fixed typo in POD documentation of Automake::Channels. |
| * lib/Automake/Channels.pm: Fixed typo in POD documentation: |
| @<...> was used instead of C<...>. |
| |
| 2010-04-14 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Refactor tests on Automake TESTS color output. |
| * tests/color.test: Tests using the expect program moved out to... |
| * tests/color2.test: ... this new file. |
| * tests/Makefile.am (TESTS): Extended accordingly. |
| |
| 2010-04-12 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Fix typos in comments in test confh5.test |
| * tests/confh5.test: Fix a couple of typos in comments. |
| |
| Avoid possible false negatives in canon-name.test. |
| * tests/canon-name.test: Enable shell `errexit' flag. Improve |
| test description. |
| |
| 2010-04-11 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Print 'warnings are treated as errors' note if needed. |
| * lib/Automake/Channels.pm: Fix typo in comment. |
| (_print_message): If -Werror is enabled, print a 'warnings are |
| treated as errors' note before the first such warning. |
| * tests/warnopts.test: Adjust comment to mention expected warning. |
| Adjust code to ignore 'warnings are treated as errors' note. |
| * tests/location.test: Adjust expected output with -Werror. |
| * tests/werror4.test: New test. |
| * tests/Makefile.am: Update. |
| * NEWS: Update. |
| |
| Ensure we don't print 'warning:' or 'error:' twice. |
| * Makefile.am (sc_ensure_testsuite_has_run): New helper rule. |
| (sc_tests_logs_duplicate_prefixes): New rule, to check for |
| wrong-looking warning and error messages in the test suite logs. |
| * aclocal.in (scan_configure_dep, scan_file): Remove duplicate |
| `warning: ' prefix. |
| * tests/vars3.test: Rename variable to avoid false positive. |
| |
| Prepend type to warning, error, and fatal messages. |
| For the first part of messages of types `error' or `fatal', |
| prepend `error: ' to the message. Prepend `warning: ' to |
| warning messages, whatever the setting of -Werror. |
| * lib/Automake/Channels.pm (partial): Move up definition. |
| (_format_message): Emit `header' and `footer' strings only with |
| the first resp. last part of a set of partial messages. |
| * lib/Automake/ChannelDefs.pm: Add missing '1;' statement at the |
| end of the module. |
| (Automake::ChannelDefs): Setup warning channels with header |
| `warning: ', error and fatal messages with header `error: '. |
| * tests/condinc2.test, tests/ltinstloc.test: Adjust expected |
| error messages. |
| * tests/comment5.test: Likewise. Also, include stack notes |
| should not start with `error:'. |
| * tests/location.test: Likewise. Also, try both -Werror and |
| -Wno-error. |
| * NEWS: Update. |
| Report by Bruno Haible. |
| |
| Fix capitalization of error messages, reword one message. |
| * lib/Automake/Variable.pm (define): Do not capitalize the first |
| word in the error message. |
| * automake.in (require_file_internal): Likewise. Also, reword |
| and line-wrap for better readability. |
| * tests/distcom7.test, tests/pluseq5.test, tests/pluseq9.test: |
| Adjust tests. |
| |
| Fix connected warnings about obsolete exeext override. |
| * lib/Automake/Rule.pm (define): Merge two warnings that belong |
| together, by setting the 'partial' flag for the first one. |
| |
| Fix per-Makefile.am setting of -Werror. |
| Before this patch, 'AUTOMAKE_OPTIONS = -Werror' in one |
| Makefile.am would carry over to other Makefile.am files |
| treated afterwards by the same thread, causing inconsistent |
| and unstable exit status values. |
| * lib/Automake/Channels.pm (dup_channel_setup) |
| (drop_channel_setup): Save and restore the setting of |
| $warnings_are_errors. |
| * tests/werror3.test: New test. |
| * tests/Makefile.am: Adjust. |
| * NEWS: Update. |
| |
| 2010-04-11 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Bugfix in confh5.test w.r.t. Solaris/Heirloom Sh. |
| * tests/confh5.test: In the generated Makefile.am: do not use |
| `test ! -e FILE' to check for the non-existence of a file, since |
| that is not supported by Solaris/Heirloom Sh. |
| |
| Make test `aclocal3.test' stricter. |
| * tests/aclocal3.test: Add call to `set -e'. Fail if $ACLOCAL |
| succeds unexpectedly. |
| |
| Add tests checking that symlinks are resolved by `make dist'. |
| * tests/distlinks.test: New test. |
| * tests/Makefile.am (TESTS): Updated accordingly. |
| Suggested by observations from Ralf Wildenhues. |
| |
| 2010-04-11 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Use -9 for maximum xz compression with dist-xz. |
| * lib/am/distdir.am (dist-xz, dist, dist-all): Pass -9 to xz. |
| * NEWS, THANKS: Update. |
| Report by Pavel Sanda. |
| |
| 2010-04-11 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Avoid possible false negatives in cond46.test. |
| * tests/cond46.test: Enable shell `errexit' flag (and bumped |
| copyright years). Due to this change, the testcase should now |
| fail on unexpected failures in calls to $ACLOCAL/$AUTOMAKE (whose |
| outcomes were previously unchecked), and on failures in grepping |
| the expected diagnostic in Automake stderr. |
| |
| 2010-04-04 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Generated tests are now just a thin layer around other tests. |
| * tests/Makefile.am: Rewrite the rule to generate the `*-p.test' |
| test scripts so that any of them simply includes the corresponding |
| `*.test' script (after setting `$parallel_tests' to `yes'). |
| * tests/.gitignore: Add wildcard for temporary files used in the |
| generation of `*-p.test' tests. |
| |
| 2010-03-30 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Avoid an unportable use of `$status' shell variable. |
| * Makefile.am (path-check): Don't use the `$status' shell variable |
| in the target's rules, as it's special in Zsh (equivalent to `$?', |
| and readonly). |
| |
| Avoid another use of `chmod -R'. |
| * Makefile.am (path-check): To be safe, do not use `chmod -R' on |
| $(distdir) before removing it (as Solaris `chmod -R' touches |
| symlink targets). Instead, use the cleanup strategy used in |
| distdir.am. |
| |
| 2010-03-28 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Remove uses of @acronym and @sc. |
| * doc/automake.texi (Public Macros, Limitations on File Names): |
| Remove all usage of @acronym and @sc in the manual. |
| Suggested by Karl Berry. |
| |
| 2010-03-13 Karl Berry <karl@freefriends.org> |
| |
| GNU hello uses fdl.texi, not gpl.texi. |
| * doc/automake.texi (Texinfo): Adjust example to upstream |
| change. |
| |
| 2010-03-06 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Formatting cleanups in macro comments. |
| * automake.in, lib/Automake/Channels.pm, |
| lib/Automake/FileUtils.pm, lib/Automake/Options.pm, |
| lib/Automake/Variable.pm, lib/Automake/XFile.pm, |
| m4/options.m4, m4/substnot.m4: Fix macro comment format. |
| |
| 2010-03-04 Stefano Lattarini <stefano.lattarini@gmail.com> |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Avoid generation of `tests/defs-p' file. |
| * tests/defs.in: In the generated `configure.in' snippet: call |
| `AM_INIT_AUTOMAKE' with the `parallel-tests' option if the shell |
| variable `parallel_tests' is set to `yes'. |
| * tests/Makefile.am (defs-p): Target removed. |
| (check_SCRIPTS): Removed `defs-p'. |
| (clean-local-check): Do not unlink `defs-p' anymore. |
| ($(parallel_tests)): Transformation rules for the test scripts |
| adjusted. |
| * tests/gen-parallel-tests: Selection rules for the test |
| scripts adjusted. |
| * tests/parallel-tests.test: Set `$parallel_tests' to `yes' |
| then include `./defs' (rather than simply including `./defs-p'). |
| * tests/parallel-tests2.test: Likewise. |
| * tests/parallel-tests3.test: Likewise. |
| * tests/parallel-tests4.test: Likewise. |
| * tests/parallel-tests5.test: Likewise. |
| * tests/parallel-tests6.test: Likewise. |
| * tests/parallel-tests7.test: Likewise. |
| * tests/parallel-tests8.test: Likewise. |
| * tests/parallel-tests9.test: Likewise. |
| * tests/parallel-tests10.test: Likewise. |
| * tests/README (Section "Writing Test Cases" subsection "Do"): |
| Adjusted the parts referring to tests checking `parallel-tests' |
| behaviour. Some other minor related improvements. |
| * tests/.gitignore (defs-p): Removed. |
| |
| 2010-03-04 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Remove redundant unset of variable TESTS from some test scripts. |
| * tests/color.test: Do not unset the `TESTS' variable, as it's |
| already unset in the `defs' file. |
| * tests/check5.test: Likewise. |
| * tests/check8.test: Likewise. |
| * tests/check9.test: Likewise. |
| * tests/check10.test: Likewise. |
| * tests/check11.test: Likewise. |
| * tests/parallel-tests.test: Likewise. |
| * tests/parallel-tests3.test: Likewise. |
| * tests/parallel-tests4.test: Likewise. |
| * tests/parallel-tests5.test: Likewise. |
| * tests/parallel-tests6.test: Likewise. |
| * tests/parallel-tests7.test: Likewise. |
| |
| 2010-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix cscope test on systems without working Fortran compiler. |
| * tests/cscope.test: Skip remainder of test if `$MAKE all' fails. |
| * THANKS: Update. |
| Report by Peter Johansson. |
| |
| 2010-02-24 Antonio Diaz Diaz <ant_diaz@teleline.es> (tiny change) |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Add lzip compression support. |
| * automake.in (handle_dist): Recognize dist-lzip. |
| (make_paragraphs): Map LZIP to dist-lzip. |
| * doc/automake.texi (Dist): Add dist-lzip. |
| (Options): Likewise. |
| * lib/Automake/Options.pm (_process_option_list): Add dist-lzip. |
| * lib/am/distdir.am |
| (dist dist-all): Add command to create an lzip-compressed tarball. |
| (distcheck): Handle lzip-compressed tarballs just like the others. |
| * tests/defs.in: Test for lzip, too. |
| * tests/lzip.test: New file, based on nogzip.test. |
| * tests/Makefile.am (TESTS): Add lzip.test. |
| * NEWS: Update. |
| |
| 2010-02-22 Karl Berry <karl@gnu.org> |
| |
| Improve help message of mdate-sh. |
| * mdate-sh: mention actual output format in help message. |
| |
| 2010-02-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Deprecate dist-lzma in favor of dist-xz. |
| * doc/automake.texi (The Types of Distributions, Options): |
| Adjust text to reflect renaming of lzma to xz. |
| * NEWS: Update. |
| Missing deprecation noted by Antonio Diaz Diaz. |
| |
| 2010-02-20 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Add tests about support of wildcards in EXTRA_DIST. |
| * tests/extra10.test: New test, check basic support of wildcards |
| in EXTRA_DIST. |
| * tests/extra11.test: New test, check more complex usage of |
| wildcards in EXTRA_DIST. |
| * tests/extra12.test: New test, check usage of wildcards in |
| EXTRA_DIST when $builddir != $srcdir. |
| * tests/Makefile.am (TESTS): Updated accordingly. |
| Necessity of these new tests suggested by Braden McDaniel |
| and Ralf Wildenhues. |
| |
| 2010-02-08 Simon Josefsson <simon@josefsson.org> |
| |
| Fix copyright statement in gnupload script. |
| * lib/gnupload: Fix copyright statement. |
| |
| 2010-02-06 Dmitry V. Levin <ldv@altlinux.org> (tiny change) |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix exit status of signal handlers in shell scripts. |
| The value of `$?' on entrance to signal handlers in shell scripts |
| cannot be relied upon, so set the exit code explicitly to |
| 128 + SIG<SIGNAL>. |
| * lib/am/check.am (am__check_pre): Use `exit 143' in signal handler. |
| * lib/elisp-comp: Likewise. |
| * lib/install-sh: Likewise. |
| * lib/ylwrap: Likewise. Also, fix script to trap signal 13, not 3. |
| * NEWS, THANKS: Update. |
| Bug report, analysis, and initial patch by Dmitry V. Levin. |
| |
| 2010-02-06 Karl Berry <karl@gnu.org> |
| |
| Improve gnupload usage text. |
| * gnupload (usage): Shorten to make more likely to fit on a tty |
| line. Mention CMD in the synopsis. With ..., plural is implied. |
| |
| 2010-01-28 Christos Kontas <xakon@yahoo.com> (tiny change) |
| |
| Fix some typos in the manual |
| * doc/automake.texi (Nested Packages, Rebuilding): Fix typos. |
| |
| 2010-01-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix silent-rules output for disabled dependency tracking. |
| * lib/am/depend2.am [!%FASTDEP%]: Rework silent-rules variable |
| expansion code to also work in the case where %AMDEP% expands |
| to FALSE at config.status time, using new substitution string |
| %VERBOSE-NODEP%. |
| * automake.in (verbose_nodep_flag): New function, appending |
| `@am__nodep@' to the verbose-variable name. |
| (handle_languages): If dependencies are not disabled, use it to |
| set %VERBOSE-NODEP%. |
| * m4/depend.m4: Substitute am__nodep as '_no', so the second |
| verbose-variable will always expand to an empty string, if |
| dependencies are enabled. |
| * tests/silent5.test: Also test --disable-dependency-tracking; |
| also test per-target flags for non-C language files. |
| * tests/silent9.test: New test, like silent4.test but disable |
| dependency tracking. |
| * tests/Makefile.am: Adjust. |
| * NEWS, THANKS: Update. |
| Report by Dmitry V. Levin <ldv@altlinux.org>. |
| |
| 2010-01-17 Stefano Lattarini <stefano.lattarini@gmail.com> |
| |
| Slighty improve tests acoutbs.test and acoutbs2.test. |
| * tests/acoutbs2.test: Enable `errexit' shell flag. Check that |
| autoconf and configure work, that the file `zot' is created by |
| configure, and that no file containing a backslash in its name is |
| created. |
| * tests/acoutbs.test: Likewise, plus updated copyright years. |
| |
| Fix test acoutbs2.test. |
| * tests/acoutbs2: In the generated configure.in: add proper calls |
| to AC_INIT and AM_INIT_AUTOMAKE, and remove explicit definition of |
| PACKAGE and VERSION. Add a call to aclocal before calling automake. |
| Updated copyright years. |
| * tests/Makefile.am (XFAIL_TESTS): Removed acoutbs2.test. |
| |
| Add forgotten test scripts to $(TESTS). |
| * tests/Makefile.am (TESTS): Added test scripts present on the |
| filesystem, which were erroneously left out from $(TESTS): |
| acoutbs2.test, badopt.test, extra2.test. |
| (XFAIL_TESTS): Added acoutbs2.test. |
| |
| 2010-01-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Sync auxiliary files from upstream. |
| * INSTALL, lib/INSTALL, lib/config.guess, lib/config.sub: |
| Sync from upstream. |
| |
| Bump copyright years. |
| * aclocal.in (write_aclocal, version): Bump copyright years. |
| * automake.in (gen_copyright, version): Likewise. |
| * doc/automake.texi: Likewise. |
| |
| Rotate ChangeLog. |
| * ChangeLog.09: New file, rotated from ... |
| * ChangeLog: ... here. |
| * Makefile.am (EXTRA_DIST): Distribute ChangeLog.09. |
| |
| ----- |
| |
| Copyright (C) 2010 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, are |
| permitted provided the copyright notice and this notice are preserved. |
| |
| ;; Variables: |
| ;; coding: utf-8 |
| ;; End: |
