|  | /* Host file transfer support for gdbserver. | 
|  | Copyright (C) 2007-2021 Free Software Foundation, Inc. | 
|  |  | 
|  | Contributed by CodeSourcery. | 
|  |  | 
|  | This file is part of GDB. | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 3 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program.  If not, see <http://www.gnu.org/licenses/>.  */ | 
|  |  | 
|  | #include "server.h" | 
|  | #include "gdb/fileio.h" | 
|  | #include "hostio.h" | 
|  |  | 
|  | #include <fcntl.h> | 
|  | #include <limits.h> | 
|  | #include <unistd.h> | 
|  | #include <sys/types.h> | 
|  | #include <sys/stat.h> | 
|  | #include "gdbsupport/fileio.h" | 
|  |  | 
|  | struct fd_list | 
|  | { | 
|  | int fd; | 
|  | struct fd_list *next; | 
|  | }; | 
|  |  | 
|  | static struct fd_list *open_fds; | 
|  |  | 
|  | static int | 
|  | safe_fromhex (char a, int *nibble) | 
|  | { | 
|  | if (a >= '0' && a <= '9') | 
|  | *nibble = a - '0'; | 
|  | else if (a >= 'a' && a <= 'f') | 
|  | *nibble = a - 'a' + 10; | 
|  | else if (a >= 'A' && a <= 'F') | 
|  | *nibble = a - 'A' + 10; | 
|  | else | 
|  | return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Filenames are hex encoded, so the maximum we can handle is half the | 
|  | packet buffer size.  Cap to PATH_MAX, if it is shorter.  */ | 
|  | #if !defined (PATH_MAX) || (PATH_MAX > (PBUFSIZ / 2 + 1)) | 
|  | #  define HOSTIO_PATH_MAX (PBUFSIZ / 2 + 1) | 
|  | #else | 
|  | #  define HOSTIO_PATH_MAX PATH_MAX | 
|  | #endif | 
|  |  | 
|  | static int | 
|  | require_filename (char **pp, char *filename) | 
|  | { | 
|  | int count; | 
|  | char *p; | 
|  |  | 
|  | p = *pp; | 
|  | count = 0; | 
|  |  | 
|  | while (*p && *p != ',') | 
|  | { | 
|  | int nib1, nib2; | 
|  |  | 
|  | /* Don't allow overflow.  */ | 
|  | if (count >= HOSTIO_PATH_MAX - 1) | 
|  | return -1; | 
|  |  | 
|  | if (safe_fromhex (p[0], &nib1) | 
|  | || safe_fromhex (p[1], &nib2)) | 
|  | return -1; | 
|  |  | 
|  | filename[count++] = nib1 * 16 + nib2; | 
|  | p += 2; | 
|  | } | 
|  |  | 
|  | filename[count] = '\0'; | 
|  | *pp = p; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | require_int (char **pp, int *value) | 
|  | { | 
|  | char *p; | 
|  | int count, firstdigit; | 
|  |  | 
|  | p = *pp; | 
|  | *value = 0; | 
|  | count = 0; | 
|  | firstdigit = -1; | 
|  |  | 
|  | while (*p && *p != ',') | 
|  | { | 
|  | int nib; | 
|  |  | 
|  | if (safe_fromhex (p[0], &nib)) | 
|  | return -1; | 
|  |  | 
|  | if (firstdigit == -1) | 
|  | firstdigit = nib; | 
|  |  | 
|  | /* Don't allow overflow.  */ | 
|  | if (count >= 8 || (count == 7 && firstdigit >= 0x8)) | 
|  | return -1; | 
|  |  | 
|  | *value = *value * 16 + nib; | 
|  | p++; | 
|  | count++; | 
|  | } | 
|  |  | 
|  | *pp = p; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | require_data (char *p, int p_len, char **data, int *data_len) | 
|  | { | 
|  | int input_index, output_index, escaped; | 
|  |  | 
|  | *data = (char *) xmalloc (p_len); | 
|  |  | 
|  | output_index = 0; | 
|  | escaped = 0; | 
|  | for (input_index = 0; input_index < p_len; input_index++) | 
|  | { | 
|  | char b = p[input_index]; | 
|  |  | 
|  | if (escaped) | 
|  | { | 
|  | (*data)[output_index++] = b ^ 0x20; | 
|  | escaped = 0; | 
|  | } | 
|  | else if (b == '}') | 
|  | escaped = 1; | 
|  | else | 
|  | (*data)[output_index++] = b; | 
|  | } | 
|  |  | 
|  | if (escaped) | 
|  | { | 
|  | free (*data); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | *data_len = output_index; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | require_comma (char **pp) | 
|  | { | 
|  | if (**pp == ',') | 
|  | { | 
|  | (*pp)++; | 
|  | return 0; | 
|  | } | 
|  | else | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int | 
|  | require_end (char *p) | 
|  | { | 
|  | if (*p == '\0') | 
|  | return 0; | 
|  | else | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int | 
|  | require_valid_fd (int fd) | 
|  | { | 
|  | struct fd_list *fd_ptr; | 
|  |  | 
|  | for (fd_ptr = open_fds; fd_ptr != NULL; fd_ptr = fd_ptr->next) | 
|  | if (fd_ptr->fd == fd) | 
|  | return 0; | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Fill BUF with an hostio error packet representing the last hostio | 
|  | error, from errno.  */ | 
|  |  | 
|  | static void | 
|  | hostio_error (char *own_buf) | 
|  | { | 
|  | int fileio_error = host_to_fileio_error (errno); | 
|  | sprintf (own_buf, "F-1,%x", fileio_error); | 
|  | } | 
|  |  | 
|  | static void | 
|  | hostio_packet_error (char *own_buf) | 
|  | { | 
|  | sprintf (own_buf, "F-1,%x", FILEIO_EINVAL); | 
|  | } | 
|  |  | 
|  | static void | 
|  | hostio_reply (char *own_buf, int result) | 
|  | { | 
|  | sprintf (own_buf, "F%x", result); | 
|  | } | 
|  |  | 
|  | static int | 
|  | hostio_reply_with_data (char *own_buf, char *buffer, int len, | 
|  | int *new_packet_len) | 
|  | { | 
|  | int input_index, output_index, out_maxlen; | 
|  |  | 
|  | sprintf (own_buf, "F%x;", len); | 
|  | output_index = strlen (own_buf); | 
|  |  | 
|  | out_maxlen = PBUFSIZ; | 
|  |  | 
|  | for (input_index = 0; input_index < len; input_index++) | 
|  | { | 
|  | char b = buffer[input_index]; | 
|  |  | 
|  | if (b == '$' || b == '#' || b == '}' || b == '*') | 
|  | { | 
|  | /* These must be escaped.  */ | 
|  | if (output_index + 2 > out_maxlen) | 
|  | break; | 
|  | own_buf[output_index++] = '}'; | 
|  | own_buf[output_index++] = b ^ 0x20; | 
|  | } | 
|  | else | 
|  | { | 
|  | if (output_index + 1 > out_maxlen) | 
|  | break; | 
|  | own_buf[output_index++] = b; | 
|  | } | 
|  | } | 
|  |  | 
|  | *new_packet_len = output_index; | 
|  | return input_index; | 
|  | } | 
|  |  | 
|  | /* Process ID of inferior whose filesystem hostio functions | 
|  | that take FILENAME arguments will use.  Zero means to use | 
|  | our own filesystem.  */ | 
|  |  | 
|  | static int hostio_fs_pid; | 
|  |  | 
|  | /* See hostio.h.  */ | 
|  |  | 
|  | void | 
|  | hostio_handle_new_gdb_connection (void) | 
|  | { | 
|  | hostio_fs_pid = 0; | 
|  | } | 
|  |  | 
|  | /* Handle a "vFile:setfs:" packet.  */ | 
|  |  | 
|  | static void | 
|  | handle_setfs (char *own_buf) | 
|  | { | 
|  | char *p; | 
|  | int pid; | 
|  |  | 
|  | /* If the target doesn't have any of the in-filesystem-of methods | 
|  | then there's no point in GDB sending "vFile:setfs:" packets.  We | 
|  | reply with an empty packet (i.e. we pretend we don't understand | 
|  | "vFile:setfs:") and that should stop GDB sending any more.  */ | 
|  | if (!the_target->supports_multifs ()) | 
|  | { | 
|  | own_buf[0] = '\0'; | 
|  | return; | 
|  | } | 
|  |  | 
|  | p = own_buf + strlen ("vFile:setfs:"); | 
|  |  | 
|  | if (require_int (&p, &pid) | 
|  | || pid < 0 | 
|  | || require_end (p)) | 
|  | { | 
|  | hostio_packet_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | hostio_fs_pid = pid; | 
|  |  | 
|  | hostio_reply (own_buf, 0); | 
|  | } | 
|  |  | 
|  | static void | 
|  | handle_open (char *own_buf) | 
|  | { | 
|  | char filename[HOSTIO_PATH_MAX]; | 
|  | char *p; | 
|  | int fileio_flags, fileio_mode, flags, fd; | 
|  | mode_t mode; | 
|  | struct fd_list *new_fd; | 
|  |  | 
|  | p = own_buf + strlen ("vFile:open:"); | 
|  |  | 
|  | if (require_filename (&p, filename) | 
|  | || require_comma (&p) | 
|  | || require_int (&p, &fileio_flags) | 
|  | || require_comma (&p) | 
|  | || require_int (&p, &fileio_mode) | 
|  | || require_end (p) | 
|  | || fileio_to_host_openflags (fileio_flags, &flags) | 
|  | || fileio_to_host_mode (fileio_mode, &mode)) | 
|  | { | 
|  | hostio_packet_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* We do not need to convert MODE, since the fileio protocol | 
|  | uses the standard values.  */ | 
|  | if (hostio_fs_pid != 0) | 
|  | fd = the_target->multifs_open (hostio_fs_pid, filename, flags, mode); | 
|  | else | 
|  | fd = open (filename, flags, mode); | 
|  |  | 
|  | if (fd == -1) | 
|  | { | 
|  | hostio_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Record the new file descriptor.  */ | 
|  | new_fd = XNEW (struct fd_list); | 
|  | new_fd->fd = fd; | 
|  | new_fd->next = open_fds; | 
|  | open_fds = new_fd; | 
|  |  | 
|  | hostio_reply (own_buf, fd); | 
|  | } | 
|  |  | 
|  | static void | 
|  | handle_pread (char *own_buf, int *new_packet_len) | 
|  | { | 
|  | int fd, ret, len, offset, bytes_sent; | 
|  | char *p, *data; | 
|  | static int max_reply_size = -1; | 
|  |  | 
|  | p = own_buf + strlen ("vFile:pread:"); | 
|  |  | 
|  | if (require_int (&p, &fd) | 
|  | || require_comma (&p) | 
|  | || require_valid_fd (fd) | 
|  | || require_int (&p, &len) | 
|  | || require_comma (&p) | 
|  | || require_int (&p, &offset) | 
|  | || require_end (p)) | 
|  | { | 
|  | hostio_packet_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Do not attempt to read more than the maximum number of bytes | 
|  | hostio_reply_with_data can fit in a packet.  We may still read | 
|  | too much because of escaping, but this is handled below.  */ | 
|  | if (max_reply_size == -1) | 
|  | { | 
|  | sprintf (own_buf, "F%x;", PBUFSIZ); | 
|  | max_reply_size = PBUFSIZ - strlen (own_buf); | 
|  | } | 
|  | if (len > max_reply_size) | 
|  | len = max_reply_size; | 
|  |  | 
|  | data = (char *) xmalloc (len); | 
|  | #ifdef HAVE_PREAD | 
|  | ret = pread (fd, data, len, offset); | 
|  | #else | 
|  | ret = -1; | 
|  | #endif | 
|  | /* If we have no pread or it failed for this file, use lseek/read.  */ | 
|  | if (ret == -1) | 
|  | { | 
|  | ret = lseek (fd, offset, SEEK_SET); | 
|  | if (ret != -1) | 
|  | ret = read (fd, data, len); | 
|  | } | 
|  |  | 
|  | if (ret == -1) | 
|  | { | 
|  | hostio_error (own_buf); | 
|  | free (data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | bytes_sent = hostio_reply_with_data (own_buf, data, ret, new_packet_len); | 
|  |  | 
|  | /* If we were using read, and the data did not all fit in the reply, | 
|  | we would have to back up using lseek here.  With pread it does | 
|  | not matter.  But we still have a problem; the return value in the | 
|  | packet might be wrong, so we must fix it.  This time it will | 
|  | definitely fit.  */ | 
|  | if (bytes_sent < ret) | 
|  | bytes_sent = hostio_reply_with_data (own_buf, data, bytes_sent, | 
|  | new_packet_len); | 
|  |  | 
|  | free (data); | 
|  | } | 
|  |  | 
|  | static void | 
|  | handle_pwrite (char *own_buf, int packet_len) | 
|  | { | 
|  | int fd, ret, len, offset; | 
|  | char *p, *data; | 
|  |  | 
|  | p = own_buf + strlen ("vFile:pwrite:"); | 
|  |  | 
|  | if (require_int (&p, &fd) | 
|  | || require_comma (&p) | 
|  | || require_valid_fd (fd) | 
|  | || require_int (&p, &offset) | 
|  | || require_comma (&p) | 
|  | || require_data (p, packet_len - (p - own_buf), &data, &len)) | 
|  | { | 
|  | hostio_packet_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | #ifdef HAVE_PWRITE | 
|  | ret = pwrite (fd, data, len, offset); | 
|  | #else | 
|  | ret = -1; | 
|  | #endif | 
|  | /* If we have no pwrite or it failed for this file, use lseek/write.  */ | 
|  | if (ret == -1) | 
|  | { | 
|  | ret = lseek (fd, offset, SEEK_SET); | 
|  | if (ret != -1) | 
|  | ret = write (fd, data, len); | 
|  | } | 
|  |  | 
|  | if (ret == -1) | 
|  | { | 
|  | hostio_error (own_buf); | 
|  | free (data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | hostio_reply (own_buf, ret); | 
|  | free (data); | 
|  | } | 
|  |  | 
|  | static void | 
|  | handle_fstat (char *own_buf, int *new_packet_len) | 
|  | { | 
|  | int fd, bytes_sent; | 
|  | char *p; | 
|  | struct stat st; | 
|  | struct fio_stat fst; | 
|  |  | 
|  | p = own_buf + strlen ("vFile:fstat:"); | 
|  |  | 
|  | if (require_int (&p, &fd) | 
|  | || require_valid_fd (fd) | 
|  | || require_end (p)) | 
|  | { | 
|  | hostio_packet_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (fstat (fd, &st) == -1) | 
|  | { | 
|  | hostio_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | host_to_fileio_stat (&st, &fst); | 
|  |  | 
|  | bytes_sent = hostio_reply_with_data (own_buf, | 
|  | (char *) &fst, sizeof (fst), | 
|  | new_packet_len); | 
|  |  | 
|  | /* If the response does not fit into a single packet, do not attempt | 
|  | to return a partial response, but simply fail.  */ | 
|  | if (bytes_sent < sizeof (fst)) | 
|  | write_enn (own_buf); | 
|  | } | 
|  |  | 
|  | static void | 
|  | handle_close (char *own_buf) | 
|  | { | 
|  | int fd, ret; | 
|  | char *p; | 
|  | struct fd_list **open_fd_p, *old_fd; | 
|  |  | 
|  | p = own_buf + strlen ("vFile:close:"); | 
|  |  | 
|  | if (require_int (&p, &fd) | 
|  | || require_valid_fd (fd) | 
|  | || require_end (p)) | 
|  | { | 
|  | hostio_packet_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ret = close (fd); | 
|  |  | 
|  | if (ret == -1) | 
|  | { | 
|  | hostio_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | open_fd_p = &open_fds; | 
|  | /* We know that fd is in the list, thanks to require_valid_fd.  */ | 
|  | while ((*open_fd_p)->fd != fd) | 
|  | open_fd_p = &(*open_fd_p)->next; | 
|  |  | 
|  | old_fd = *open_fd_p; | 
|  | *open_fd_p = (*open_fd_p)->next; | 
|  | free (old_fd); | 
|  |  | 
|  | hostio_reply (own_buf, ret); | 
|  | } | 
|  |  | 
|  | static void | 
|  | handle_unlink (char *own_buf) | 
|  | { | 
|  | char filename[HOSTIO_PATH_MAX]; | 
|  | char *p; | 
|  | int ret; | 
|  |  | 
|  | p = own_buf + strlen ("vFile:unlink:"); | 
|  |  | 
|  | if (require_filename (&p, filename) | 
|  | || require_end (p)) | 
|  | { | 
|  | hostio_packet_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (hostio_fs_pid != 0) | 
|  | ret = the_target->multifs_unlink (hostio_fs_pid, filename); | 
|  | else | 
|  | ret = unlink (filename); | 
|  |  | 
|  | if (ret == -1) | 
|  | { | 
|  | hostio_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | hostio_reply (own_buf, ret); | 
|  | } | 
|  |  | 
|  | static void | 
|  | handle_readlink (char *own_buf, int *new_packet_len) | 
|  | { | 
|  | char filename[HOSTIO_PATH_MAX], linkname[HOSTIO_PATH_MAX]; | 
|  | char *p; | 
|  | int ret, bytes_sent; | 
|  |  | 
|  | p = own_buf + strlen ("vFile:readlink:"); | 
|  |  | 
|  | if (require_filename (&p, filename) | 
|  | || require_end (p)) | 
|  | { | 
|  | hostio_packet_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (hostio_fs_pid != 0) | 
|  | ret = the_target->multifs_readlink (hostio_fs_pid, filename, | 
|  | linkname, | 
|  | sizeof (linkname) - 1); | 
|  | else | 
|  | ret = readlink (filename, linkname, sizeof (linkname) - 1); | 
|  |  | 
|  | if (ret == -1) | 
|  | { | 
|  | hostio_error (own_buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | bytes_sent = hostio_reply_with_data (own_buf, linkname, ret, new_packet_len); | 
|  |  | 
|  | /* If the response does not fit into a single packet, do not attempt | 
|  | to return a partial response, but simply fail.  */ | 
|  | if (bytes_sent < ret) | 
|  | sprintf (own_buf, "F-1,%x", FILEIO_ENAMETOOLONG); | 
|  | } | 
|  |  | 
|  | /* Handle all the 'F' file transfer packets.  */ | 
|  |  | 
|  | int | 
|  | handle_vFile (char *own_buf, int packet_len, int *new_packet_len) | 
|  | { | 
|  | if (startswith (own_buf, "vFile:open:")) | 
|  | handle_open (own_buf); | 
|  | else if (startswith (own_buf, "vFile:pread:")) | 
|  | handle_pread (own_buf, new_packet_len); | 
|  | else if (startswith (own_buf, "vFile:pwrite:")) | 
|  | handle_pwrite (own_buf, packet_len); | 
|  | else if (startswith (own_buf, "vFile:fstat:")) | 
|  | handle_fstat (own_buf, new_packet_len); | 
|  | else if (startswith (own_buf, "vFile:close:")) | 
|  | handle_close (own_buf); | 
|  | else if (startswith (own_buf, "vFile:unlink:")) | 
|  | handle_unlink (own_buf); | 
|  | else if (startswith (own_buf, "vFile:readlink:")) | 
|  | handle_readlink (own_buf, new_packet_len); | 
|  | else if (startswith (own_buf, "vFile:setfs:")) | 
|  | handle_setfs (own_buf); | 
|  | else | 
|  | return 0; | 
|  |  | 
|  | return 1; | 
|  | } |