| 2016-12-31 Alan Modra <amodra@gmail.com> | |
| * disassemble.c (disassembler): Add break accidentally removed | |
| by PRU patch. | |
| 2016-12-31 Dimitar Dimitrov <dimitar@dinux.eu> | |
| * Makefile.am: Add PRU source files. | |
| * configure.ac: Add PRU target. | |
| * disassemble.c (disassembler): Register PRU arch. | |
| * pru-dis.c: New file. | |
| * pru-opc.c: New file. | |
| * Makefile.in: Regenerate. | |
| * configure: Regenerate. | |
| 2016-12-29 Yao Qi <yao.qi@linaro.org> | |
| * avr-dis.c: Include "bfd_stdint.h" | |
| (avrdis_opcode): Change return type to int, add argument | |
| insn. Set *INSN on success. | |
| (print_insn_avr): Check return value of avrdis_opcode, and | |
| return -1 on error. | |
| 2016-12-28 Alan Modra <amodra@gmail.com> | |
| * configure.ac: Revert 2016-12-23. | |
| * Makefile.am: Likewise. | |
| (MIPS_DEFS): Define. | |
| (mips-dis.lo): Add rule. | |
| * Makefile.in: Regenerate. | |
| * aclocal.m4: Regenerate. | |
| * config.in: Regenerate. | |
| * configure: Regenerate. | |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3', | |
| `4' and `s' operand codes. | |
| (mips16_opcodes): Add "asmacro" entry. | |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_mips16_insn_arg): Simplify processing of | |
| extended operands. | |
| * mips16-opc.c (decode_mips16_operand): Switch the extended | |
| form of the `<' operand type to LSB position 22. | |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (decode_mips16_operand): Replace `0' and `4' | |
| operand codes with `.' and `F' respectively. | |
| (mips16_opcodes): Likewise. | |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix | |
| matching for INSN2_SHORT_ONLY opcode table entries. | |
| * mips16-opc.c (SH): New macro. | |
| (mips16_opcodes): Set SH in `pinfo2' for non-extensible | |
| instruction entries: "nop", "addu", "and", "break", "cmp", | |
| "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", | |
| "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", | |
| "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", | |
| "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", | |
| "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", | |
| "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", | |
| "seh", "sew", "zeb", "zeh", "zew" and "extend". | |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (decode_mips16_operand) <'6'>: Remove extended | |
| encoding support. | |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (mips16_opcodes): Set NODS in `pinfo' for | |
| "extend". | |
| 2016-12-23 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (set_default_mips_dis_options): Use | |
| HAVE_BFD_MIPS_ELF_GET_ABIFLAGS rather than BFD64 to guard the | |
| call to `bfd_mips_elf_get_abiflags'. | |
| * configure.ac: Check for `bfd_mips_elf_get_abiflags' in BFD. | |
| * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add `libbfd.la'. | |
| * aclocal.m4: Regenerate. | |
| * configure: Regenerate. | |
| * config.in: Regenerate. | |
| * Makefile.in: Regenerate. | |
| 2016-12-23 Tristan Gingold <gingold@adacore.com> | |
| * configure: Regenerate. | |
| 2016-12-23 Tristan Gingold <gingold@adacore.com> | |
| * po/opcodes.pot: Regenerate. | |
| 2016-12-21 Andrew Waterman <andrew@sifive.com> | |
| * riscv-opc.c (riscv_opcodes): Reorder jal and call entries. | |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than | |
| ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry. | |
| (print_insn_mips16): Check opcode entries for validity against | |
| the ISA level and ASE set selected. | |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_mips16_insn_arg): Always handle `extend' and | |
| `insn' together, with `extend' as the high-order 16 bits. | |
| (match_kind): New enum. | |
| (print_insn_mips16): Rework for 32-bit instruction matching. | |
| Do not dump EXTEND prefixes here. | |
| * mips16-opc.c (mips16_opcodes): Move "extend" entry to the end. | |
| Recode `match' and `mask' fields as 32-bit in absolute "jal" and | |
| "jalx" entries. | |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (mips16_opcodes): Set membership to I3 rather | |
| than I1 for the "ddiv", "ddivu", "drem", "dremu" and "dsubu" | |
| INSN_MACRO entries. | |
| 2016-12-20 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (mips16_opcodes): Set membership to I3 rather | |
| than I1 for the SP-relative "sd"/$ra entry (SDRASP minor | |
| opcode). | |
| 2016-12-20 Andrew Waterman <andrew@sifive.com> | |
| * riscv-opc.c (riscv_opcodes): Rename the "*.sc" instructions to | |
| "*.aqrl". | |
| 2016-12-20 Andrew Waterman <andrew@sifive.com> | |
| * riscv-opc.c (riscv_opcodes): Mark the rd* and csr* aliases as | |
| INSN_ALIAS. | |
| 2016-12-20 Andrew Waterman <andrew@sifive.com> | |
| * riscv-opc.c (riscv_opcodes): Change jr and jalr to "o(s)" | |
| format. | |
| 2016-12-20 Andrew Waterman <andrew@sifive.com> | |
| * riscv-dis.c (riscv_disassemble_insn): Default to the ELF's | |
| XLEN when none is provided. | |
| 2016-12-20 Andrew Waterman <andrew@sifive.com> | |
| * riscv-opc.c: Formatting fixes. | |
| 2016-12-20 Alan Modra <amodra@gmail.com> | |
| * Makefile.am (TARGET_LIBOPCODES_CFILES): Add riscv files. | |
| * Makefile.in: Regenerate. | |
| * po/POTFILES.in: Regenerate. | |
| 2016-12-19 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (set_default_mips_dis_options) [SYMTAB_AVAILABLE]: | |
| Only examine ELF file structures here. | |
| 2016-12-19 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (set_default_mips_dis_options) [BFD64]: Only call | |
| `bfd_mips_elf_get_abiflags' here. | |
| 2016-12-16 Nick Clifton <nickc@redhat.com> | |
| * arm-dis.c (print_insn_thumb32): Fix compile time warning | |
| computing value_in_comment. | |
| 2016-12-14 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (mips_convert_abiflags_ases): New function. | |
| (set_default_mips_dis_options): Also infer ASE flags from ELF | |
| file structures. | |
| 2016-12-14 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (set_default_mips_dis_options): Reorder ELF file | |
| header flag interpretation code. | |
| 2016-12-14 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (mips16_opcodes): Set RD_SP rather than RD_PC in | |
| `pinfo2' with SP-relative "sd" entries. | |
| 2016-12-14 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (mips16_opcodes): Update comments on MIPS16e | |
| compact jumps. | |
| 2016-12-13 Renlin Li <renlin.li@arm.com> | |
| * aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range | |
| qualifier. | |
| (operand_general_constraint_met_p): Remove case for CP_REG. | |
| (aarch64_print_operand): Print CRn, CRm operand using imm field. | |
| * aarch64-tbl.h (QL_SYS): Use CR qualifier. | |
| (QL_SYSL): Likewise. | |
| (aarch64_opcode_table): Change CRn, CRm operand class and type. | |
| * aarch64-opc-2.c : Regenerate. | |
| * aarch64-asm-2.c : Likewise. | |
| * aarch64-dis-2.c : Likewise. | |
| 2016-12-12 Yao Qi <yao.qi@linaro.org> | |
| * rx-dis.c: Include <setjmp.h> | |
| (struct private): New. | |
| (rx_get_byte): Check return value of read_memory_func, and | |
| call memory_error_func and OPCODES_SIGLONGJMP on error. | |
| (print_insn_rx): Call OPCODES_SIGSETJMP. | |
| 2016-12-12 Yao Qi <yao.qi@linaro.org> | |
| * rl78-dis.c: Include <setjmp.h>. | |
| (struct private): New. | |
| (rl78_get_byte): Check return value of read_memory_func, and | |
| call memory_error_func and OPCODES_SIGLONGJMP on error. | |
| (print_insn_rl78_common): Call OPCODES_SIGJMP. | |
| 2016-12-09 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases. | |
| 2016-12-09 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (decode_mips16_operand) <'e'>: Use HINT rather | |
| than UINT. | |
| 2016-12-09 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_insn_mips16): Use a tab rather than a space | |
| to separate `extend' and its uninterpreted argument output. | |
| Separate hexadecimal halves of undecoded extended instructions | |
| output. | |
| 2016-12-08 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_mips16_insn_arg): Remove extraneous | |
| indentation space across. | |
| 2016-12-08 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_mips16_insn_arg): Avoid delay-slot | |
| adjustment for PC-relative operations following MIPS16e compact | |
| jumps or undefined RR/J(AL)R(C) encodings. | |
| 2016-12-08 Maciej W. Rozycki <macro@imgtec.com> | |
| * aarch64-asm.c (aarch64_ins_reglane): Rename `index' local | |
| variable to `reglane_index'. | |
| 2016-12-08 Luis Machado <lgustavo@codesourcery.com> | |
| * ppc-dis.c (get_powerpc_dialect): Check NULL info->section. | |
| 2016-12-07 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_mips16_insn_arg): Fix comment typo. | |
| 2016-12-07 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips16-opc.c (mips16_opcodes): Update comment naming structure | |
| members. | |
| 2016-12-07 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_mips_disassembler_options): Reformat output. | |
| 2016-12-05 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * arm-dis.c (coprocessor_opcodes): Add vcmla and vcadd. | |
| (print_insn_coprocessor): Add 'V' format for neon D or Q regs. | |
| 2016-12-05 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * arm-dis.c (coprocessor_opcodes): Add vjcvt. | |
| 2016-12-01 Nick Clifton <nickc@redhat.com> | |
| PR binutils/20893 | |
| * i386-dis.c (OP_VEX): Replace call to abort with a append of bad | |
| opcode designator. | |
| 2016-11-29 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-opc.c (insert_ra_chk): New function. | |
| (insert_rb_chk): Likewise. | |
| (insert_rad): Update text error message. | |
| (insert_rcd): Likewise. | |
| (insert_rhv2): Likewise. | |
| (insert_r0): Likewise. | |
| (insert_r1): Likewise. | |
| (insert_r2): Likewise. | |
| (insert_r3): Likewise. | |
| (insert_sp): Likewise. | |
| (insert_gp): Likewise. | |
| (insert_pcl): Likewise. | |
| (insert_blink): Likewise. | |
| (insert_ilink1): Likewise. | |
| (insert_ilink2): Likewise. | |
| (insert_ras): Likewise. | |
| (insert_rbs): Likewise. | |
| (insert_rcs): Likewise. | |
| (insert_simm3s): Likewise. | |
| (insert_rrange): Likewise. | |
| (insert_fpel): Likewise. | |
| (insert_blinkel): Likewise. | |
| (insert_pcel): Likewise. | |
| (insert_nps_3bit_dst): Likewise. | |
| (insert_nps_3bit_dst_short): Likewise. | |
| (insert_nps_3bit_src2_short): Likewise. | |
| (insert_nps_bitop_size_2b): Likewise. | |
| (MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Likewise. | |
| (RA_CHK): Define. | |
| (RB): Adjust. | |
| (RB_CHK): Define. | |
| (RC): Adjust. | |
| * arc-dis.c (print_insn_arc): Add LOAD and STORE class. | |
| * arc-tbl.h (div, divu): All instructions are DIVREM class. | |
| Change first insn argument to check for LP_COUNT usage. | |
| (rem): Likewise. | |
| (ld, ldd): All instructions are LOAD class. Change first insn | |
| argument to check for LP_COUNT usage. | |
| (st, std): All instructions are STORE class. | |
| (mac, mpy, dmac, mul, dmpy): All instructions are MPY class. | |
| Change first insn argument to check for LP_COUNT usage. | |
| (mov): All instructions are MOVE class. Change first insn | |
| argument to check for LP_COUNT usage. | |
| 2016-11-29 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-dis.c (is_compatible_p): Remove function. | |
| (skip_this_opcode): Don't add any decoding class to decode list. | |
| Remove warning. | |
| (find_format_from_table): Go through all opcodes, and warn if we | |
| use a guessed mnemonic. | |
| 2016-11-28 Ramiro Polla <ramiro@hex-rays.com> | |
| Amit Pawar <amit.pawar@amd.com> | |
| PR binutils/20637 | |
| * i386-dis.c (get_valid_dis386): Ignore REX_B for 32-bit XOP | |
| instructions. | |
| 2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com> | |
| * configure: Regenerate. | |
| 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> | |
| * sparc-opc.c (HWS_V8): Definition moved from | |
| gas/config/tc-sparc.c. | |
| (HWS_V9): Likewise. | |
| (HWS_VA): Likewise. | |
| (HWS_VB): Likewise. | |
| (HWS_VC): Likewise. | |
| (HWS_VD): Likewise. | |
| (HWS_VE): Likewise. | |
| (HWS_VV): Likewise. | |
| (HWS_VM): Likewise. | |
| (HWS2_VM): Likewise. | |
| (sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of | |
| existing entries. | |
| 2016-11-22 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-tbl.h: Reorder conditional flags with delay flags for 'b' | |
| instructions. | |
| 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define. | |
| (aarch64_feature_simd_v8_3, SIMD_V8_3): Define. | |
| (aarch64_opcode_table): Add fcmla and fcadd. | |
| (AARCH64_OPERANDS): Add IMM_ROT{1,2,3}. | |
| * aarch64-asm.h (aarch64_ins_imm_rotate): Declare. | |
| * aarch64-asm.c (aarch64_ins_imm_rotate): Define. | |
| * aarch64-dis.h (aarch64_ext_imm_rotate): Declare. | |
| * aarch64-dis.c (aarch64_ext_imm_rotate): Define. | |
| * aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}. | |
| * aarch64-opc.c (fields): Add FLD_rotate{1,2,3}. | |
| (operand_general_constraint_met_p): Rotate and index range check. | |
| (aarch64_print_operand): Handle rotate operand. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis-2.c: Likewise. | |
| * aarch64-opc-2.c: Likewise. | |
| 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-tbl.h (arch64_opcode_table): Add ldaprb, ldaprh, ldapr. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis-2.c: Regenerate. | |
| * aarch64-opc-2.c: Regenerate. | |
| 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-tbl.h (arch64_opcode_table): Add fjcvtzs. | |
| (QL_FP2INT_W_D, aarch64_feature_fp_v8_3, FP_V8_3): Define. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis-2.c: Regenerate. | |
| * aarch64-opc-2.c: Regenerate. | |
| 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-tbl.h (QL_X1NIL): New. | |
| (arch64_opcode_table): Add ldraa, ldrab. | |
| (AARCH64_OPERANDS): Add "ADDR_SIMM10". | |
| * aarch64-asm.h (aarch64_ins_addr_simm10): Declare. | |
| * aarch64-asm.c (aarch64_ins_addr_simm10): Define. | |
| * aarch64-dis.h (aarch64_ext_addr_simm10): Declare. | |
| * aarch64-dis.c (aarch64_ext_addr_simm10): Define. | |
| * aarch64-opc.h (enum aarch64_field_kind): Add FLD_S_simm10. | |
| * aarch64-opc.c (fields): Add data for FLD_S_simm10. | |
| (operand_general_constraint_met_p): Handle AARCH64_OPND_ADDR_SIMM10. | |
| (aarch64_print_operand): Likewise. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis-2.c: Regenerate. | |
| * aarch64-opc-2.c: Regenerate. | |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-tbl.h (arch64_opcode_table): Add braa, brab, blraa, blrab, braaz, | |
| brabz, blraaz, blrabz, retaa, retab, eretaa, eretab. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis-2.c: Regenerate. | |
| * aarch64-opc-2.c: Regenerate. | |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-tbl.h (arch64_opcode_table): Add pacga. | |
| (AARCH64_OPERANDS): Add Rm_SP. | |
| * aarch64-opc.c (aarch64_print_operand): Handle AARCH64_OPND_Rm_SP. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis-2.c: Regenerate. | |
| * aarch64-opc-2.c: Regenerate. | |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-tbl.h (arch64_opcode_table): Add pacia, pacib, pacda, pacdb, autia, | |
| autib, autda, autdb, paciza, pacizb, pacdza, pacdzb, autiza, autizb, autdza, | |
| autdzb, xpaci, xpacd. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis-2.c: Regenerate. | |
| * aarch64-opc-2.c: Regenerate. | |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-opc.c (aarch64_sys_regs): Add apiakeylo_el1, apiakeyhi_el1, | |
| apibkeylo_el1, apibkeyhi_el1, apdakeylo_el1, apdakeyhi_el1, | |
| apdbkeylo_el1, apdbkeyhi_el1, apgakeylo_el1 and apgakeyhi_el1. | |
| (aarch64_sys_reg_supported_p): Add feature test for new registers. | |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-tbl.h (aarch64_feature_v8_3, ARMV8_3, V8_3_INSN): New. | |
| (arch64_opcode_table): Add xpaclri, pacia1716, pacib1716, autia1716, | |
| autib1716, paciaz, paciasp, pacibz, pacibsp, autiaz, autiasp, autibz, | |
| autibsp. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis-2.c: Regenerate. | |
| 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-gen.c (find_alias_opcode): Increase max_num_aliases to 32. | |
| 2016-11-09 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutils/20799 | |
| * i386-dis-evex.h (evex_table): Replace EdqwS with Edqw. | |
| * i386-dis.c (EdqwS): Removed. | |
| (dqw_swap_mode): Likewise. | |
| (intel_operand_size): Don't check dqw_swap_mode. | |
| (OP_E_register): Likewise. | |
| (OP_E_memory): Likewise. | |
| (OP_G): Likewise. | |
| (OP_EX): Likewise. | |
| * i386-opc.tbl: Remove "S" from EVEX vpextrw. | |
| * i386-tbl.h: Regerated. | |
| 2016-11-09 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-opc.tbl: Merge AVX512F vmovq. | |
| * i386-tbl.h: Regerated. | |
| 2016-11-08 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutils/20701 | |
| * i386-dis.c (THREE_BYTE_0F7A): Removed. | |
| (dis386_twobyte): Don't use THREE_BYTE_0F7A. | |
| (three_byte_table): Remove THREE_BYTE_0F7A. | |
| 2016-11-07 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutils/20775 | |
| * i386-dis.c (FGRPd9_2): Replace 0 with 1. | |
| (FGRPd9_4): Replace 1 with 2. | |
| (FGRPd9_5): Replace 2 with 3. | |
| (FGRPd9_6): Replace 3 with 4. | |
| (FGRPd9_7): Replace 4 with 5. | |
| (FGRPda_5): Replace 5 with 6. | |
| (FGRPdb_4): Replace 6 with 7. | |
| (FGRPde_3): Replace 7 with 8. | |
| (FGRPdf_4): Replace 8 with 9. | |
| (fgrps): Add an entry for Bad_Opcode. | |
| 2016-11-04 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-opc.c (arc_flag_operands): Add F_DI14. | |
| (arc_flag_classes): Add C_DI14. | |
| * arc-nps400-tbl.h: Add new exc instructions. | |
| 2016-11-03 Graham Markall <graham.markall@embecosm.com> | |
| * arc-dis.c (arc_insn_length): Return length 8 for instructions with | |
| major opcode 0xa. | |
| * arc-nps-400-tbl.h: Add dcmac instruction. | |
| * arc-opc.c (arc_operands): Added operands for dcmac instruction. | |
| (insert_nps_rbdouble_64): Added. | |
| (extract_nps_rbdouble_64): Added. | |
| (insert_nps_proto_size): Added. | |
| (extract_nps_proto_size): Added. | |
| 2016-11-03 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-dis.c (struct arc_operand_iterator): Remove all fields | |
| relating to long instruction processing, add new limm field. | |
| (OPCODE): Rename to... | |
| (OPCODE_32BIT_INSN): ...this. | |
| (OPCODE_AC): Delete. | |
| (skip_this_opcode): Handle different instruction lengths, update | |
| macro name. | |
| (special_flag_p): Update parameter type. | |
| (find_format_from_table): Update for more instruction lengths. | |
| (find_format_long_instructions): Delete. | |
| (find_format): Update for more instruction lengths. | |
| (arc_insn_length): Likewise. | |
| (extract_operand_value): Update for more instruction lengths. | |
| (operand_iterator_next): Remove code relating to long | |
| instructions. | |
| (arc_opcode_to_insn_type): New function. | |
| (print_insn_arc):Update for more instructions lengths. | |
| * arc-ext.c (extInstruction_t): Change argument type. | |
| * arc-ext.h (extInstruction_t): Change argument type. | |
| * arc-fxi.h: Change type unsigned to unsigned long long | |
| extensively throughout. | |
| * arc-nps400-tbl.h: Add long instructions taken from | |
| arc_long_opcodes table in arc-opc.c. | |
| * arc-opc.c: Update parameter types on insert/extract handlers. | |
| (arc_long_opcodes): Delete. | |
| (arc_num_long_opcodes): Delete. | |
| (arc_opcode_len): Update for more instruction lengths. | |
| 2016-11-03 Graham Markall <graham.markall@embecosm.com> | |
| * arc-dis.c (print_insn_arc): Swap highbyte and lowbyte. | |
| 2016-11-03 Graham Markall <graham.markall@embecosm.com> | |
| * arc-dis.c (find_format_from_table): Replace use of ARC_SHORT | |
| with arc_opcode_len. | |
| (find_format_long_instructions): Likewise. | |
| * arc-opc.c (arc_opcode_len): New function. | |
| 2016-11-03 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-nps400-tbl.h: Fix some instruction masks. | |
| 2016-11-03 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-dis.c (REG_82): Removed. | |
| (X86_64_82_REG_0): Likewise. | |
| (X86_64_82_REG_1): Likewise. | |
| (X86_64_82_REG_2): Likewise. | |
| (X86_64_82_REG_3): Likewise. | |
| (X86_64_82_REG_4): Likewise. | |
| (X86_64_82_REG_5): Likewise. | |
| (X86_64_82_REG_6): Likewise. | |
| (X86_64_82_REG_7): Likewise. | |
| (X86_64_82): New. | |
| (dis386): Use X86_64_82 instead of REG_82. | |
| (reg_table): Remove REG_82. | |
| (x86_64_table): Add X86_64_82. Remove X86_64_82_REG_0, | |
| X86_64_82_REG_1, X86_64_82_REG_2, X86_64_82_REG_3, | |
| X86_64_82_REG_4, X86_64_82_REG_5, X86_64_82_REG_6 and | |
| X86_64_82_REG_7. | |
| 2016-11-03 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutils/20754 | |
| * i386-dis.c (REG_82): New. | |
| (X86_64_82_REG_0): Likewise. | |
| (X86_64_82_REG_1): Likewise. | |
| (X86_64_82_REG_2): Likewise. | |
| (X86_64_82_REG_3): Likewise. | |
| (X86_64_82_REG_4): Likewise. | |
| (X86_64_82_REG_5): Likewise. | |
| (X86_64_82_REG_6): Likewise. | |
| (X86_64_82_REG_7): Likewise. | |
| (dis386): Use REG_82. | |
| (reg_table): Add REG_82. | |
| (x86_64_table): Add X86_64_82_REG_0, X86_64_82_REG_1, | |
| X86_64_82_REG_2, X86_64_82_REG_3, X86_64_82_REG_4, | |
| X86_64_82_REG_5, X86_64_82_REG_6 and X86_64_82_REG_7. | |
| 2016-11-03 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-dis.c (REG_82): Renamed to ... | |
| (REG_83): This. | |
| (dis386): Updated. | |
| (reg_table): Likewise. | |
| 2016-11-02 Igor Tsimbalist <igor.v.tsimbalist@intel.com> | |
| * i386-dis.c (enum): Add PREFIX_EVEX_0F3852, PREFIX_EVEX_0F3853. | |
| * i386-dis-evex.h (evex_table): Updated. | |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512_4VNNIW_FLAGS, | |
| CPU_ANY_AVX512_4VNNIW_FLAGS. Update CPU_ANY_AVX512F_FLAGS. | |
| (cpu_flags): Add CpuAVX512_4VNNIW. | |
| * i386-opc.h (enum): (AVX512_4VNNIW): New. | |
| (i386_cpu_flags): Add cpuavx512_4vnniw. | |
| * i386-opc.tbl: Add Intel AVX512_4VNNIW instructions. | |
| * i386-init.h: Regenerate. | |
| * i386-tbl.h: Ditto. | |
| 2016-11-02 Igor Tsimbalist <igor.v.tsimbalist@intel.com> | |
| * i386-dis.c. (enum): Add PREFIX_EVEX_0F389A, | |
| PREFIX_EVEX_0F389B, PREFIX_EVEX_0F38AA, PREFIX_EVEX_0F38AB. | |
| * i386-dis-evex.h (evex_table): Updated. | |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512_4FMAPS_FLAGS, | |
| CPU_ANY_AVX512_4FMAPS_FLAGS. Update CPU_ANY_AVX512F_FLAGS. | |
| (cpu_flags): Add CpuAVX512_4FMAPS. | |
| (opcode_modifiers): Add ImplicitQuadGroup modifier. | |
| * i386-opc.h (AVX512_4FMAP): New. | |
| (i386_cpu_flags): Add cpuavx512_4fmaps. | |
| (ImplicitQuadGroup): New. | |
| (i386_opcode_modifier): Add implicitquadgroup. | |
| * i386-opc.tbl: Add Intel AVX512_4FMAPS instructions. | |
| * i386-init.h: Regenerate. | |
| * i386-tbl.h: Ditto. | |
| 2016-11-01 Palmer Dabbelt <palmer@dabbelt.com> | |
| Andrew Waterman <andrew@sifive.com> | |
| Add support for RISC-V architecture. | |
| * configure.ac: Add entry for bfd_riscv_arch. | |
| * configure: Regenerate. | |
| * disassemble.c (disassembler): Add support for riscv. | |
| (disassembler_usage): Likewise. | |
| * riscv-dis.c: New file. | |
| * riscv-opc.c: New file. | |
| 2016-10-21 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-dis.c (PREFIX_RM_0_0FAE_REG_7): Removed. | |
| (prefix_table): Remove the PREFIX_RM_0_0FAE_REG_7 entry. | |
| (rm_table): Update the RM_0FAE_REG_7 entry. | |
| * i386-gen.c (cpu_flag_init): Remove CPU_PCOMMIT_FLAGS. | |
| (cpu_flags): Remove CpuPCOMMIT. | |
| * i386-opc.h (CpuPCOMMIT): Removed. | |
| (i386_cpu_flags): Remove cpupcommit. | |
| * i386-opc.tbl: Remove pcommit. | |
| * i386-init.h: Regenerated. | |
| * i386-tbl.h: Likewise. | |
| 2016-10-20 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutis/20705 | |
| * i386-dis.c (get_valid_dis386): Ignore the REX_B bit and | |
| the highest bit in VEX.vvvv for the 3-byte VEX prefix in | |
| 32-bit mode. Don't check vex.register_specifier in 32-bit | |
| mode. | |
| (OP_VEX): Check for invalid mask registers. | |
| 2016-10-18 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutis/20699 | |
| * i386-dis.c (OP_E_memory): Check addr32flag in stead of | |
| sizeflag. | |
| 2016-10-18 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutis/20704 | |
| * i386-dis.c (three_byte_table): Remove the remaining SSE5 support. | |
| 2016-10-18 Maciej W. Rozycki <macro@imgtec.com> | |
| * aarch64-dis.c (aarch64_ext_sve_addr_rr_lsl): Rename `index' | |
| local variable to `index_regno'. | |
| 2016-10-17 Cupertino Miranda <cmiranda@synopsys.com> | |
| * arc-tbl.h: Removed any "inv.+" instructions from the table. | |
| 2016-10-14 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-dis.c (find_format_from_table): Discriminate LIMM indicator | |
| usage on ISA basis. | |
| 2016-10-11 Jiong Wang <jiong.wang@arm.com> | |
| PR target/20666 | |
| * aarch64-asm.c (convert_bfc_to_bfm): Fix dest index. | |
| 2016-10-07 Jiong Wang <jiong.wang@arm.com> | |
| PR target/20667 | |
| * aarch64-opc.c (aarch64_print_operand): Always print operand if it's | |
| available. | |
| 2016-10-07 Alan Modra <amodra@gmail.com> | |
| * sh-opc.h (sh_merge_bfd_arch): Delete prototype. | |
| 2016-10-06 Alan Modra <amodra@gmail.com> | |
| * aarch64-opc.c: Spell fall through comments consistently. | |
| * i386-dis.c: Likewise. | |
| * aarch64-dis.c: Add missing fall through comments. | |
| * aarch64-opc.c: Likewise. | |
| * arc-dis.c: Likewise. | |
| * arm-dis.c: Likewise. | |
| * i386-dis.c: Likewise. | |
| * m68k-dis.c: Likewise. | |
| * mep-asm.c: Likewise. | |
| * ns32k-dis.c: Likewise. | |
| * sh-dis.c: Likewise. | |
| * tic4x-dis.c: Likewise. | |
| * tic6x-dis.c: Likewise. | |
| * vax-dis.c: Likewise. | |
| 2016-10-06 Alan Modra <amodra@gmail.com> | |
| * arc-ext.c (create_map): Add missing break. | |
| * msp430-decode.opc (encode_as): Likewise. | |
| * msp430-decode.c: Regenerate. | |
| 2016-10-06 Alan Modra <amodra@gmail.com> | |
| * cr16-dis.c (print_insn_cr16): Don't use boolean OR in arithmetic. | |
| * crx-dis.c (print_insn_crx): Likewise. | |
| 2016-09-30 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutils/20657 | |
| * i386-dis.c (putop): Don't assign alt twice. | |
| 2016-09-29 Jiong Wang <jiong.wang@arm.com> | |
| PR target/20553 | |
| * aarch64-tbl.h (fmla, fmls, fmul, fmulx): Fix opcode mask field. | |
| 2016-09-29 Alan Modra <amodra@gmail.com> | |
| * ppc-opc.c (L): Make compulsory. | |
| (LOPT): New, optional form of L. | |
| (HTM_R): Define as LOPT. | |
| (L0, L1): Delete. | |
| (L32OPT): New, optional for 32-bit L. | |
| (L2OPT): New, 2-bit L for dcbf. | |
| (SVC_LEC): Update. | |
| (L2): Define. | |
| (insert_l0, extract_l0, insert_l1, extract_l2): Delete. | |
| (powerpc_opcodes <cmpli, cmpi, cmpl, cmp>): Use L32OPT. | |
| <dcbf>: Use L2OPT. | |
| <tlbiel, tlbie>: Use LOPT. | |
| <wclr, wclrall>: Use L2. | |
| 2016-09-26 Vlad Zakharov <vzakhar@synopsys.com> | |
| * Makefile.in: Regenerate. | |
| * configure: Likewise. | |
| 2016-09-26 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-ext-tbl.h (EXTINSN2OPF): Define. | |
| (EXTINSN2OP): Use EXTINSN2OPF. | |
| (bspeekm, bspop, modapp): New extension instructions. | |
| * arc-opc.c (F_DNZ_ND): Define. | |
| (F_DNZ_D): Likewise. | |
| (F_SIZEB1): Changed. | |
| (C_DNZ_D): Define. | |
| (C_HARD): Changed. | |
| * arc-tbl.h (dbnz): New instruction. | |
| (prealloc): Allow it for ARC EM. | |
| (xbfu): Likewise. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (print_immediate_offset_address): Print spaces | |
| after commas in addresses. | |
| (aarch64_print_operand): Likewise. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (operand_general_constraint_met_p): Use "must be" | |
| rather than "should be" or "expected to be" in error messages. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-dis.c (remove_dot_suffix): New function, split out from... | |
| (print_mnemonic_name): ...here. | |
| (print_comment): New function. | |
| (print_aarch64_insn): Call it. | |
| * aarch64-opc.c (aarch64_conds): Add SVE names. | |
| (aarch64_print_operand): Print alternative condition names in | |
| a comment. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (OP_SVE_B, OP_SVE_BB, OP_SVE_BBBU, OP_SVE_BMB) | |
| (OP_SVE_BPB, OP_SVE_BUB, OP_SVE_BUBB, OP_SVE_BUU, OP_SVE_BZ) | |
| (OP_SVE_BZB, OP_SVE_BZBB, OP_SVE_BZU, OP_SVE_DD, OP_SVE_DDD) | |
| (OP_SVE_DMD, OP_SVE_DMH, OP_SVE_DMS, OP_SVE_DU, OP_SVE_DUD, OP_SVE_DUU) | |
| (OP_SVE_DUV_BHS, OP_SVE_DUV_BHSD, OP_SVE_DZD, OP_SVE_DZU, OP_SVE_HB) | |
| (OP_SVE_HMD, OP_SVE_HMS, OP_SVE_HU, OP_SVE_HUU, OP_SVE_HZU, OP_SVE_RR) | |
| (OP_SVE_RURV_BHSD, OP_SVE_RUV_BHSD, OP_SVE_SMD, OP_SVE_SMH, OP_SVE_SMS) | |
| (OP_SVE_SU, OP_SVE_SUS, OP_SVE_SUU, OP_SVE_SZS, OP_SVE_SZU, OP_SVE_UB) | |
| (OP_SVE_UUD, OP_SVE_UUS, OP_SVE_VMR_BHSD, OP_SVE_VMU_SD) | |
| (OP_SVE_VMVD_BHS, OP_SVE_VMVU_BHSD, OP_SVE_VMVU_SD, OP_SVE_VMVV_BHSD) | |
| (OP_SVE_VMVV_SD, OP_SVE_VMV_BHSD, OP_SVE_VMV_HSD, OP_SVE_VMV_SD) | |
| (OP_SVE_VM_SD, OP_SVE_VPU_BHSD, OP_SVE_VPV_BHSD, OP_SVE_VRR_BHSD) | |
| (OP_SVE_VRU_BHSD, OP_SVE_VR_BHSD, OP_SVE_VUR_BHSD, OP_SVE_VUU_BHSD) | |
| (OP_SVE_VUVV_BHSD, OP_SVE_VUVV_SD, OP_SVE_VUV_BHSD, OP_SVE_VUV_SD) | |
| (OP_SVE_VU_BHSD, OP_SVE_VU_HSD, OP_SVE_VU_SD, OP_SVE_VVD_BHS) | |
| (OP_SVE_VVU_BHSD, OP_SVE_VVVU_SD, OP_SVE_VVV_BHSD, OP_SVE_VVV_SD) | |
| (OP_SVE_VV_BHSD, OP_SVE_VV_HSD_BHS, OP_SVE_VV_SD, OP_SVE_VWW_BHSD) | |
| (OP_SVE_VXX_BHSD, OP_SVE_VZVD_BHS, OP_SVE_VZVU_BHSD, OP_SVE_VZVV_BHSD) | |
| (OP_SVE_VZVV_SD, OP_SVE_VZV_SD, OP_SVE_V_SD, OP_SVE_WU, OP_SVE_WV_BHSD) | |
| (OP_SVE_XU, OP_SVE_XUV_BHSD, OP_SVE_XVW_BHSD, OP_SVE_XV_BHSD) | |
| (OP_SVE_XWU, OP_SVE_XXU): New macros. | |
| (aarch64_feature_sve): New variable. | |
| (SVE): New macro. | |
| (_SVE_INSN): Likewise. | |
| (aarch64_opcode_table): Add SVE instructions. | |
| * aarch64-opc.h (extract_fields): Declare. | |
| * aarch64-opc-2.c: Regenerate. | |
| * aarch64-asm.c (do_misc_encoding): Handle the new SVE aarch64_ops. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis.c (extract_fields): Make global. | |
| (do_misc_decoding): Handle the new SVE aarch64_ops. | |
| * aarch64-dis-2.c: Regenerate. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.h (FLD_SVE_M_4, FLD_SVE_M_14, FLD_SVE_M_16) | |
| (FLD_SVE_sz, FLD_SVE_tsz, FLD_SVE_tszl_8, FLD_SVE_tszl_19): New | |
| aarch64_field_kinds. | |
| * aarch64-opc.c (fields): Add corresponding entries. | |
| * aarch64-asm.c (aarch64_get_variant): New function. | |
| (aarch64_encode_variant_using_iclass): Likewise. | |
| (aarch64_opcode_encode): Call it. | |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): New function. | |
| (aarch64_opcode_decode): Call it. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE core | |
| and FP register operands. | |
| * aarch64-opc.h (FLD_SVE_Rm, FLD_SVE_Rn, FLD_SVE_Vd, FLD_SVE_Vm) | |
| (FLD_SVE_Vn): New aarch64_field_kinds. | |
| * aarch64-opc.c (fields): Add corresponding entries. | |
| (aarch64_print_operand): Handle the new SVE core and FP register | |
| operands. | |
| * aarch64-opc-2.c: Regenerate. | |
| * aarch64-asm-2.c: Likewise. | |
| * aarch64-dis-2.c: Likewise. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE FP | |
| immediate operands. | |
| * aarch64-opc.h (FLD_SVE_i1): New aarch64_field_kind. | |
| * aarch64-opc.c (fields): Add corresponding entry. | |
| (operand_general_constraint_met_p): Handle the new SVE FP immediate | |
| operands. | |
| (aarch64_print_operand): Likewise. | |
| * aarch64-opc-2.c: Regenerate. | |
| * aarch64-asm.h (ins_sve_float_half_one, ins_sve_float_half_two) | |
| (ins_sve_float_zero_one): New inserters. | |
| * aarch64-asm.c (aarch64_ins_sve_float_half_one): New function. | |
| (aarch64_ins_sve_float_half_two): Likewise. | |
| (aarch64_ins_sve_float_zero_one): Likewise. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis.h (ext_sve_float_half_one, ext_sve_float_half_two) | |
| (ext_sve_float_zero_one): New extractors. | |
| * aarch64-dis.c (aarch64_ext_sve_float_half_one): New function. | |
| (aarch64_ext_sve_float_half_two): Likewise. | |
| (aarch64_ext_sve_float_zero_one): Likewise. | |
| * aarch64-dis-2.c: Regenerate. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE | |
| integer immediate operands. | |
| * aarch64-opc.h (FLD_SVE_immN, FLD_SVE_imm3, FLD_SVE_imm5) | |
| (FLD_SVE_imm5b, FLD_SVE_imm7, FLD_SVE_imm8, FLD_SVE_imm9) | |
| (FLD_SVE_immr, FLD_SVE_imms, FLD_SVE_tszh): New aarch64_field_kinds. | |
| * aarch64-opc.c (fields): Add corresponding entries. | |
| (operand_general_constraint_met_p): Handle the new SVE integer | |
| immediate operands. | |
| (aarch64_print_operand): Likewise. | |
| (aarch64_sve_dupm_mov_immediate_p): New function. | |
| * aarch64-opc-2.c: Regenerate. | |
| * aarch64-asm.h (ins_inv_limm, ins_sve_aimm, ins_sve_asimm) | |
| (ins_sve_limm_mov, ins_sve_shlimm, ins_sve_shrimm): New inserters. | |
| * aarch64-asm.c (aarch64_ins_limm_1): New function, split out from... | |
| (aarch64_ins_limm): ...here. | |
| (aarch64_ins_inv_limm): New function. | |
| (aarch64_ins_sve_aimm): Likewise. | |
| (aarch64_ins_sve_asimm): Likewise. | |
| (aarch64_ins_sve_limm_mov): Likewise. | |
| (aarch64_ins_sve_shlimm): Likewise. | |
| (aarch64_ins_sve_shrimm): Likewise. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis.h (ext_inv_limm, ext_sve_aimm, ext_sve_asimm) | |
| (ext_sve_limm_mov, ext_sve_shlimm, ext_sve_shrimm): New extractors. | |
| * aarch64-dis.c (decode_limm): New function, split out from... | |
| (aarch64_ext_limm): ...here. | |
| (aarch64_ext_inv_limm): New function. | |
| (decode_sve_aimm): Likewise. | |
| (aarch64_ext_sve_aimm): Likewise. | |
| (aarch64_ext_sve_asimm): Likewise. | |
| (aarch64_ext_sve_limm_mov): Likewise. | |
| (aarch64_top_bit): Likewise. | |
| (aarch64_ext_sve_shlimm): Likewise. | |
| (aarch64_ext_sve_shrimm): Likewise. | |
| * aarch64-dis-2.c: Regenerate. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new MUL VL | |
| operands. | |
| * aarch64-opc.c (aarch64_operand_modifiers): Initialize | |
| the AARCH64_MOD_MUL_VL entry. | |
| (value_aligned_p): Cope with non-power-of-two alignments. | |
| (operand_general_constraint_met_p): Handle the new MUL VL addresses. | |
| (print_immediate_offset_address): Likewise. | |
| (aarch64_print_operand): Likewise. | |
| * aarch64-opc-2.c: Regenerate. | |
| * aarch64-asm.h (ins_sve_addr_ri_s4xvl, ins_sve_addr_ri_s6xvl) | |
| (ins_sve_addr_ri_s9xvl): New inserters. | |
| * aarch64-asm.c (aarch64_ins_sve_addr_ri_s4xvl): New function. | |
| (aarch64_ins_sve_addr_ri_s6xvl): Likewise. | |
| (aarch64_ins_sve_addr_ri_s9xvl): Likewise. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis.h (ext_sve_addr_ri_s4xvl, ext_sve_addr_ri_s6xvl) | |
| (ext_sve_addr_ri_s9xvl): New extractors. | |
| * aarch64-dis.c (aarch64_ext_sve_addr_reg_mul_vl): New function. | |
| (aarch64_ext_sve_addr_ri_s4xvl): Likewise. | |
| (aarch64_ext_sve_addr_ri_s6xvl): Likewise. | |
| (aarch64_ext_sve_addr_ri_s9xvl): Likewise. | |
| * aarch64-dis-2.c: Regenerate. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE | |
| address operands. | |
| * aarch64-opc.h (FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14) | |
| (FLD_SVE_xs_22): New aarch64_field_kinds. | |
| (OPD_F_OD_MASK, OPD_F_OD_LSB, OPD_F_NO_ZR): New flags. | |
| (get_operand_specific_data): New function. | |
| * aarch64-opc.c (fields): Add entries for FLD_SVE_imm6, FLD_SVE_msz, | |
| FLD_SVE_xs_14 and FLD_SVE_xs_22. | |
| (operand_general_constraint_met_p): Handle the new SVE address | |
| operands. | |
| (sve_reg): New array. | |
| (get_addr_sve_reg_name): New function. | |
| (aarch64_print_operand): Handle the new SVE address operands. | |
| * aarch64-opc-2.c: Regenerate. | |
| * aarch64-asm.h (ins_sve_addr_ri_u6, ins_sve_addr_rr_lsl) | |
| (ins_sve_addr_rz_xtw, ins_sve_addr_zi_u5, ins_sve_addr_zz_lsl) | |
| (ins_sve_addr_zz_sxtw, ins_sve_addr_zz_uxtw): New inserters. | |
| * aarch64-asm.c (aarch64_ins_sve_addr_ri_u6): New function. | |
| (aarch64_ins_sve_addr_rr_lsl): Likewise. | |
| (aarch64_ins_sve_addr_rz_xtw): Likewise. | |
| (aarch64_ins_sve_addr_zi_u5): Likewise. | |
| (aarch64_ins_sve_addr_zz): Likewise. | |
| (aarch64_ins_sve_addr_zz_lsl): Likewise. | |
| (aarch64_ins_sve_addr_zz_sxtw): Likewise. | |
| (aarch64_ins_sve_addr_zz_uxtw): Likewise. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis.h (ext_sve_addr_ri_u6, ext_sve_addr_rr_lsl) | |
| (ext_sve_addr_rz_xtw, ext_sve_addr_zi_u5, ext_sve_addr_zz_lsl) | |
| (ext_sve_addr_zz_sxtw, ext_sve_addr_zz_uxtw): New extractors. | |
| * aarch64-dis.c (aarch64_ext_sve_add_reg_imm): New function. | |
| (aarch64_ext_sve_addr_ri_u6): Likewise. | |
| (aarch64_ext_sve_addr_rr_lsl): Likewise. | |
| (aarch64_ext_sve_addr_rz_xtw): Likewise. | |
| (aarch64_ext_sve_addr_zi_u5): Likewise. | |
| (aarch64_ext_sve_addr_zz): Likewise. | |
| (aarch64_ext_sve_addr_zz_lsl): Likewise. | |
| (aarch64_ext_sve_addr_zz_sxtw): Likewise. | |
| (aarch64_ext_sve_addr_zz_uxtw): Likewise. | |
| * aarch64-dis-2.c: Regenerate. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (AARCH64_OPERANDS): Add an entry for | |
| AARCH64_OPND_SVE_PATTERN_SCALED. | |
| * aarch64-opc.h (FLD_SVE_imm4): New aarch64_field_kind. | |
| * aarch64-opc.c (fields): Add a corresponding entry. | |
| (set_multiplier_out_of_range_error): New function. | |
| (aarch64_operand_modifiers): Add entry for AARCH64_MOD_MUL. | |
| (operand_general_constraint_met_p): Handle | |
| AARCH64_OPND_SVE_PATTERN_SCALED. | |
| (print_register_offset_address): Use PRIi64 to print the | |
| shift amount. | |
| (aarch64_print_operand): Likewise. Handle | |
| AARCH64_OPND_SVE_PATTERN_SCALED. | |
| * aarch64-opc-2.c: Regenerate. | |
| * aarch64-asm.h (ins_sve_scale): New inserter. | |
| * aarch64-asm.c (aarch64_ins_sve_scale): New function. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis.h (ext_sve_scale): New inserter. | |
| * aarch64-dis.c (aarch64_ext_sve_scale): New function. | |
| * aarch64-dis-2.c: Regenerate. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for | |
| AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP. | |
| * aarch64-opc.h (FLD_SVE_pattern): New aarch64_field_kind. | |
| (FLD_SVE_prfop): Likewise. | |
| * aarch64-opc.c: Include libiberty.h. | |
| (aarch64_sve_pattern_array): New variable. | |
| (aarch64_sve_prfop_array): Likewise. | |
| (fields): Add entries for FLD_SVE_pattern and FLD_SVE_prfop. | |
| (aarch64_print_operand): Handle AARCH64_OPND_SVE_PATTERN and | |
| AARCH64_OPND_SVE_PRFOP. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis-2.c: Likewise. | |
| * aarch64-opc-2.c: Likewise. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (aarch64_opnd_qualifiers): Add entries for | |
| AARCH64_OPND_QLF_P_[ZM]. | |
| (aarch64_print_operand): Print /z and /m where appropriate. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new SVE operands. | |
| * aarch64-opc.h (FLD_SVE_Pd, FLD_SVE_Pg3, FLD_SVE_Pg4_5) | |
| (FLD_SVE_Pg4_10, FLD_SVE_Pg4_16, FLD_SVE_Pm, FLD_SVE_Pn, FLD_SVE_Pt) | |
| (FLD_SVE_Za_5, FLD_SVE_Za_16, FLD_SVE_Zd, FLD_SVE_Zm_5, FLD_SVE_Zm_16) | |
| (FLD_SVE_Zn, FLD_SVE_Zt, FLD_SVE_tzsh): New aarch64_field_kinds. | |
| * aarch64-opc.c (fields): Add corresponding entries here. | |
| (operand_general_constraint_met_p): Check that SVE register lists | |
| have the correct length. Check the ranges of SVE index registers. | |
| Check for cases where p8-p15 are used in 3-bit predicate fields. | |
| (aarch64_print_operand): Handle the new SVE operands. | |
| * aarch64-opc-2.c: Regenerate. | |
| * aarch64-asm.h (ins_sve_index, ins_sve_reglist): New inserters. | |
| * aarch64-asm.c (aarch64_ins_sve_index): New function. | |
| (aarch64_ins_sve_reglist): Likewise. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis.h (ext_sve_index, ext_sve_reglist): New extractors. | |
| * aarch64-dis.c (aarch64_ext_sve_index): New function. | |
| (aarch64_ext_sve_reglist): Likewise. | |
| * aarch64-dis-2.c: Regenerate. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN) | |
| (_CRC_INSN, _LSE_INSN, _LOR_INSN, RDMA_INSN, FP16_INSN, SF16_INSN) | |
| (V8_2_INSN, aarch64_opcode_table): Initialize tied_operand field. | |
| * aarch64-opc.c (aarch64_match_operands_constraint): Check for | |
| tied operands. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (get_offset_int_reg_name): New function. | |
| (print_immediate_offset_address): Likewise. | |
| (print_register_offset_address): Take the base and offset | |
| registers as parameters. | |
| (aarch64_print_operand): Update caller accordingly. Use | |
| print_immediate_offset_address. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (BANK): New macro. | |
| (R32, R64): Take a register number as argument | |
| (int_reg): Use BANK. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (print_register_list): Add a prefix parameter. | |
| (aarch64_print_operand): Update accordingly. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (AARCH64_OPERNADS): Use fpimm rather than imm | |
| for FPIMM. | |
| * aarch64-asm.h (ins_fpimm): New inserter. | |
| * aarch64-asm.c (aarch64_ins_fpimm): New function. | |
| * aarch64-asm-2.c: Regenerate. | |
| * aarch64-dis.h (ext_fpimm): New extractor. | |
| * aarch64-dis.c (aarch64_ext_imm): Remove fpimm test. | |
| (aarch64_ext_fpimm): New function. | |
| * aarch64-dis-2.c: Regenerate. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-asm.c: Include libiberty.h. | |
| (insert_fields): New function. | |
| (aarch64_ins_imm): Use it. | |
| * aarch64-dis.c (extract_fields): New function. | |
| (aarch64_ext_imm): Use it. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (aarch64_logical_immediate_p): Replace is32 | |
| with an esize parameter. | |
| (operand_general_constraint_met_p): Update accordingly. | |
| Fix misindented code. | |
| * aarch64-asm.c (aarch64_ins_limm): Update call to | |
| aarch64_logical_immediate_p. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (match_operands_qualifier): Handle F_STRICT. | |
| 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-gen.c (indented_print): Avoid hard-coded indentation limit. | |
| 2016-09-15 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-dis.c (find_format): Walk the linked list pointed by einsn. | |
| 2016-09-14 Peter Bergner <bergner@vnet.ibm.com> | |
| * ppc-opc.c (powerpc_opcodes) <slbiag>: New mnemonic. | |
| <addex., brd, brh, brw, lwzmx, nandxor, rldixor, setbool, | |
| xor3>: Delete mnemonics. | |
| <cp_abort>: Rename mnemonic from ... | |
| <cpabort>: ...to this. | |
| <setb>: Change to a X form instruction. | |
| <sync>: Change to 1 operand form. | |
| <copy>: Delete mnemonic. | |
| <copy_first>: Rename mnemonic from ... | |
| <copy>: ...to this. | |
| <paste, paste.>: Delete mnemonics. | |
| <paste_last>: Rename mnemonic from ... | |
| <paste.>: ...to this. | |
| 2016-09-14 Anton Kolesov <Anton.Kolesov@synopsys.com> | |
| * arc-dis.c (arc_get_disassembler): Accept a null bfd gracefully. | |
| 2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com> | |
| * s390-mkopc.c (main): Support alternate arch strings. | |
| 2016-09-12 Patrick Steuer <steuer@linux.vnet.ibm.com> | |
| * s390-opc.txt: Fix kmctr instruction type. | |
| 2016-09-07 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-gen.c (cpu_flag_init): Remove CPU_IAMCU_COMPAT_FLAGS. | |
| * i386-init.h: Regenerated. | |
| 2016-08-30 Cupertino Miranda <cmiranda@synopsys.com> | |
| * opcodes/arc-dis.c (print_insn_arc): Changed. | |
| 2016-08-26 Jose E. Marchesi <jose.marchesi@oracle.com> | |
| * sparc-opc.c (sparc_opcodes): Fix typo in opcode, camellia_fi -> | |
| camellia_fl. | |
| 2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com> | |
| * arm-dis.c (psr_name): Use hex as case labels. Add detection for | |
| MSPLIM, PSPLIM, MSPLIM_NS, PSPLIM_NS, PRIMASK_NS, BASEPRI_NS, | |
| FAULTMASK_NS, CONTROL_NS and SP_NS special registers. | |
| 2016-08-24 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-dis.c (PREFIX_MOD_0_0FAE_REG_4): New. | |
| (PREFIX_MOD_3_0FAE_REG_4): Likewise. | |
| (prefix_table): Add PREFIX_MOD_0_0FAE_REG_4 and | |
| PREFIX_MOD_3_0FAE_REG_4. | |
| (mod_table): Use PREFIX_MOD_0_0FAE_REG_4 and | |
| PREFIX_MOD_3_0FAE_REG_4. | |
| * i386-gen.c (cpu_flag_init): Add CPU_PTWRITE_FLAGS. | |
| (cpu_flags): Add CpuPTWRITE. | |
| * i386-opc.h (CpuPTWRITE): New. | |
| (i386_cpu_flags): Add cpuptwrite. | |
| * i386-opc.tbl: Add ptwrite instruction. | |
| * i386-init.h: Regenerated. | |
| * i386-tbl.h: Likewise. | |
| 2016-08-24 Anton Kolesov <Anton.Kolesov@synopsys.com> | |
| * arc-dis.h: Wrap around in extern "C". | |
| 2016-08-23 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (V8_2_INSN): New macro. | |
| (aarch64_opcode_table): Use it. | |
| 2016-08-23 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (aarch64_opcode_table): Make more use of | |
| CORE_INSN, __FP_INSN and SIMD_INSN. | |
| 2016-08-23 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN): Add OP parameter. | |
| (aarch64_opcode_table): Update uses accordingly. | |
| 2016-07-25 Andrew Jenner <andrew@codesourcery.com> | |
| Kwok Cheung Yeung <kcy@codesourcery.com> | |
| opcodes/ | |
| * ppc-opc.c (vle_opcodes): Alias 'e_cmpwi' to 'e_cmpi' and | |
| 'e_cmplwi' to 'e_cmpli' instead. | |
| (OPVUPRT, OPVUPRT_MASK): Define. | |
| (powerpc_opcodes): Add E200Z4 insns. | |
| (vle_opcodes): Add context save/restore insns. | |
| 2016-07-27 Maciej W. Rozycki <macro@imgtec.com> | |
| * micromips-opc.c (micromips_opcodes): Reorder "bc" next to "b", | |
| "beqzc" next to "beq", "bnezc" next to "bne" and "jrc" next to | |
| "j". | |
| 2016-07-27 Graham Markall <graham.markall@embecosm.com> | |
| * arc-nps400-tbl.h: Change block comments to GNU format. | |
| * arc-dis.c: Add new globals addrtypenames, | |
| addrtypenames_max, and addtypeunknown. | |
| (get_addrtype): New function. | |
| (print_insn_arc): Print colons and address types when | |
| required. | |
| * arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to | |
| define insert and extract functions for all address types. | |
| (arc_operands): Add operands for colon and all address | |
| types. | |
| * arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table. | |
| * arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands, | |
| insert_nps_bd_num_buff and extract_nps_bd_num_buff functions. | |
| * arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table. | |
| * arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands, | |
| insert_nps_pmu_num_job and extract_nps_pmu_num_job functions. | |
| 2016-07-21 H.J. Lu <hongjiu.lu@intel.com> | |
| * configure: Regenerated. | |
| 2016-07-20 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-dis.c (skipclass): New structure. | |
| (decodelist): New variable. | |
| (is_compatible_p): New function. | |
| (new_element): Likewise. | |
| (skip_class_p): Likewise. | |
| (find_format_from_table): Use skip_class_p function. | |
| (find_format): Decode first the extension instructions. | |
| (print_insn_arc): Select either ARCEM or ARCHS based on elf | |
| e_flags. | |
| (parse_option): New function. | |
| (parse_disassembler_options): Likewise. | |
| (print_arc_disassembler_options): Likewise. | |
| (print_insn_arc): Use parse_disassembler_options function. Proper | |
| select ARCv2 cpu variant. | |
| * disassemble.c (disassembler_usage): Add ARC disassembler | |
| options. | |
| 2016-07-13 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-opc.c (mips_builtin_opcodes): Remove the INSN2_ALIAS | |
| annotation from the "nal" entry and reorder it beyond "bltzal". | |
| 2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com> | |
| * sparc-opc.c (ldtxa): New macro. | |
| (sparc_opcodes): Use the macro defined above to add entries for | |
| the LDTXA instructions. | |
| (asi_table): Add the ASI_TWINX_* asis used in the LDTXA | |
| instruction. | |
| 2016-07-07 James Bowman <james.bowman@ftdichip.com> | |
| * ft32-opc.c (ft32_opc_info): Correct mask for "callc" | |
| and "jmpc". | |
| 2016-07-01 Jan Beulich <jbeulich@suse.com> | |
| * i386-opc.tbl (movzbl, movzbw, movzbq, movzwl, movzwq): Remove. | |
| (movzb): Adjust to cover all permitted suffixes. | |
| (movzw): New. | |
| * i386-tbl.h: Re-generate. | |
| 2016-07-01 Jan Beulich <jbeulich@suse.com> | |
| * i386-opc.tbl (jmp): Remove Disp32S from non-64-bit variant. | |
| (lgdt): Remove Tbyte from non-64-bit variant. | |
| (fxsave64, fxrstor64, xsave64, xrstor64, xsaveopt64, xrstors64, | |
| xsaves64, xsavec64): Remove Disp16. | |
| (cvtsi2ss, cvtsi2sd, invept, invvpid, invpcid, vcvtsi2sd): | |
| Remove Disp32S from non-64-bit variants. Remove Disp16 from | |
| 64-bit variants. | |
| (vcvtsi2ss, vcvtsd2si, vcvtsd2usi, vcvtsi2sd, vcvtusi2sd, | |
| vcvtusi2ss, vcvtss2si, vcvtss2usi, vcvttsd2si, vcvttsd2usi, | |
| vcvttss2si, vcvttss2usi, vmovd, vmovq): Remove Disp16 from | |
| 64-bit variants. | |
| * i386-tbl.h: Re-generate. | |
| 2016-07-01 Jan Beulich <jbeulich@suse.com> | |
| * i386-opc.tbl (xlat): Remove RepPrefixOk. | |
| * i386-tbl.h: Re-generate. | |
| 2016-06-30 Yao Qi <yao.qi@linaro.org> | |
| * arm-dis.c (print_insn): Fix typo in comment. | |
| 2016-06-28 Richard Sandiford <richard.sandiford@arm.com> | |
| * aarch64-opc.c (operand_general_constraint_met_p): Check the | |
| range of ldst_elemlist operands. | |
| (print_register_list): Use PRIi64 to print the index. | |
| (aarch64_print_operand): Likewise. | |
| 2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> | |
| * mcore-opc.h: Remove sentinal. | |
| * mcore-dis.c (print_insn_mcore): Adjust. | |
| 2016-06-23 Graham Markall <graham.markall@embecosm.com> | |
| * arc-opc.c: Correct description of availability of NPS400 | |
| features. | |
| 2016-06-22 Peter Bergner <bergner@vnet.ibm.com> | |
| * ppc-opc.c (RM, DRM, VXASH, VXASH_MASK, XMMF, XMMF_MASK): New defines. | |
| (powerpc_opcodes) <brd, brh, brw, mffsce, mffscdrn, mffscdrni, | |
| mffscrn, mffscrni, mffsl, nandxor, rldixor, setbool, | |
| xor3>: New mnemonics. | |
| <setb>: Change to a VX form instruction. | |
| (insert_sh6): Add support for rldixor. | |
| (extract_sh6): Likewise. | |
| 2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> | |
| * arc-ext.h: Wrap in extern C. | |
| 2016-06-21 Graham Markall <graham.markall@embecosm.com> | |
| * arc-dis.c (arc_insn_length): Add comment on instruction length. | |
| Use same method for determining instruction length on ARC700 and | |
| NPS-400. | |
| (arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400. | |
| * arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions | |
| with the NPS400 subclass. | |
| * arc-opc.c: Likewise. | |
| 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> | |
| * sparc-opc.c (rdasr): New macro. | |
| (wrasr): Likewise. | |
| (rdpr): Likewise. | |
| (wrpr): Likewise. | |
| (rdhpr): Likewise. | |
| (wrhpr): Likewise. | |
| (sparc_opcodes): Use the macros above to fix and expand the | |
| definition of read/write instructions from/to | |
| asr/privileged/hyperprivileged instructions. | |
| * sparc-dis.c (v9_hpriv_reg_names): Add %hmcdper, %hmcddfr and | |
| %hva_mask_nz. Prefer softint_set and softint_clear over | |
| set_softint and clear_softint. | |
| (print_insn_sparc): Support %ver in Rd. | |
| 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> | |
| * sparc-opc.c (sparc_opcodes): Adjust instructions opcode | |
| architecture according to the hardware capabilities they require. | |
| 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> | |
| * sparc-dis.c (MASK_V9): Add SPARC_OPCODE_ARCH_V9{C,D,E,V,M}. | |
| (compute_arch_mask): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and | |
| bfd_mach_sparc_v9{c,d,e,v,m}. | |
| * sparc-opc.c (MASK_V9C): Define. | |
| (MASK_V9D): Likewise. | |
| (MASK_V9E): Likewise. | |
| (MASK_V9V): Likewise. | |
| (MASK_V9M): Likewise. | |
| (v6): Add MASK_V9{C,D,E,V,M}. | |
| (v6notlet): Likewise. | |
| (v7): Likewise. | |
| (v8): Likewise. | |
| (v9): Likewise. | |
| (v9andleon): Likewise. | |
| (v9a): Likewise. | |
| (v9b): Likewise. | |
| (v9c): Define. | |
| (v9d): Likewise. | |
| (v9e): Likewise. | |
| (v9v): Likewise. | |
| (v9m): Likewise. | |
| (sparc_opcode_archs): Add entry for v9{c,d,e,v,m}. | |
| 2016-06-15 Nick Clifton <nickc@redhat.com> | |
| * nds32-dis.c (nds32_parse_audio_ext): Change printing of integer | |
| constants to match expected behaviour. | |
| (nds32_parse_opcode): Likewise. Also for whitespace. | |
| 2016-06-15 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-opc.c (extract_rhv1): Extract value from insn. | |
| 2016-06-14 Graham Markall <graham.markall@embecosm.com> | |
| * arc-nps400-tbl.h: Add ldbit instruction. | |
| * arc-opc.c: Add flag classes required for ldbit. | |
| 2016-06-14 Graham Markall <graham.markall@embecosm.com> | |
| * arc-nps400-tbl.h: Add hash, hash.p[0-3], tr, utf8, e4by, and addf | |
| * arc-opc.c: Add flag classes, insert/extract functions, and operands to | |
| support the above instructions. | |
| 2016-06-14 Graham Markall <graham.markall@embecosm.com> | |
| * arc-nps400-tbl.h: Add calcbsd, calcbxd, calckey, calcxkey, mxb, | |
| imxb, addl, subl, andl, orl, xorl, andab, orab, lbdsize, bdlen, csms, | |
| csma, cbba, zncv, and hofs. | |
| * arc-opc.c: Add flag classes, insert/extract functions, and operands to | |
| support the above instructions. | |
| 2016-06-06 Graham Markall <graham.markall@embecosm.com> | |
| * arc-nps400-tbl.h: Add andab and orab instructions. | |
| 2016-06-06 Graham Markall <graham.markall@embecosm.com> | |
| * arc-nps400-tbl.h: Add addl-like instructions. | |
| 2016-06-06 Graham Markall <graham.markall@embecosm.com> | |
| * arc-nps400-tbl.h: Add mxb and imxb instructions. | |
| 2016-06-06 Graham Markall <graham.markall@embecosm.com> | |
| * arc-nps400-tbl.h: Add calcbsd, calcbxd, calckey and calcxkey | |
| instructions. | |
| 2016-06-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com> | |
| * s390-dis.c (option_use_insn_len_bits_p): New file scope | |
| variable. | |
| (init_disasm): Handle new command line option "insnlength". | |
| (print_s390_disassembler_options): Mention new option in help | |
| output. | |
| (print_insn_s390): Use the encoded insn length when dumping | |
| unknown instructions. | |
| 2016-06-03 Pitchumani Sivanupandi <pitchumani.s@atmel.com> | |
| * avr-dis.c (avr_operand): Add default data address space origin (0x800000) | |
| to the address and set as symbol address for LDS/ STS immediate operands. | |
| 2016-06-07 Alan Modra <amodra@gmail.com> | |
| * ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default | |
| cpu for "vle" to e500. | |
| * ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE. | |
| (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise. | |
| (PPCNONE): Delete, substitute throughout. | |
| (powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated" | |
| except for major opcode 4 and 31. | |
| (vle_opcodes <se_rfmci>): Add PPCRFMCI to flags. | |
| 2016-06-07 Matthew Wahab <matthew.wahab@arm.com> | |
| * arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with | |
| ARM_EXT_RAS in relevant entries. | |
| 2016-06-03 Peter Bergner <bergner@vnet.ibm.com> | |
| PR binutils/20196 | |
| * ppc-opc.c (powerpc_opcodes <lbarx, lharx, stbcx., sthcx.>): Enable | |
| opcodes for E6500. | |
| 2016-06-03 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutis/18386 | |
| * i386-dis.c (indirEv): Replace stack_v_mode with indir_v_mode. | |
| (indir_v_mode): New. | |
| Add comments for '&'. | |
| (reg_table): Replace "{T|}" with "{&|}" on call and jmp. | |
| (putop): Handle '&'. | |
| (intel_operand_size): Handle indir_v_mode. | |
| (OP_E_register): Likewise. | |
| * i386-opc.tbl: Mark 64-bit indirect call/jmp as AMD64. Add | |
| 64-bit indirect call/jmp for AMD64. | |
| * i386-tbl.h: Regenerated | |
| 2016-06-02 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-dis.c (struct arc_operand_iterator): New structure. | |
| (find_format_from_table): All the old content from find_format, | |
| with some minor adjustments, and parameter renaming. | |
| (find_format_long_instructions): New function. | |
| (find_format): Rewritten. | |
| (arc_insn_length): Add LSB parameter. | |
| (extract_operand_value): New function. | |
| (operand_iterator_next): New function. | |
| (print_insn_arc): Use new functions to find opcode, and iterator | |
| over operands. | |
| * arc-opc.c (insert_nps_3bit_dst_short): New function. | |
| (extract_nps_3bit_dst_short): New function. | |
| (insert_nps_3bit_src2_short): New function. | |
| (extract_nps_3bit_src2_short): New function. | |
| (insert_nps_bitop1_size): New function. | |
| (extract_nps_bitop1_size): New function. | |
| (insert_nps_bitop2_size): New function. | |
| (extract_nps_bitop2_size): New function. | |
| (insert_nps_bitop_mod4_msb): New function. | |
| (extract_nps_bitop_mod4_msb): New function. | |
| (insert_nps_bitop_mod4_lsb): New function. | |
| (extract_nps_bitop_mod4_lsb): New function. | |
| (insert_nps_bitop_dst_pos3_pos4): New function. | |
| (extract_nps_bitop_dst_pos3_pos4): New function. | |
| (insert_nps_bitop_ins_ext): New function. | |
| (extract_nps_bitop_ins_ext): New function. | |
| (arc_operands): Add new operands. | |
| (arc_long_opcodes): New global array. | |
| (arc_num_long_opcodes): New global. | |
| * arc-nps400-tbl.h: Add comments referencing arc_long_opcodes. | |
| 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> | |
| * nds32-asm.h: Add extern "C". | |
| * sh-opc.h: Likewise. | |
| 2016-06-01 Graham Markall <graham.markall@embecosm.com> | |
| * arc-nps400-tbl.h: Add operands a,b,u6, 0,b,u6, and | |
| 0,b,limm to the rflt instruction. | |
| 2016-05-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> | |
| * sh-opc.h (ARCH_SH_HAS_DSP): Make the shifted value an unsigned | |
| constant. | |
| 2016-05-29 H.J. Lu <hongjiu.lu@intel.com> | |
| PR gas/20145 | |
| * i386-gen.c (cpu_flag_init): Add CPU_ANY_AVX512F_FLAGS, | |
| CPU_ANY_AVX512CD_FLAGS, CPU_ANY_AVX512ER_FLAGS, | |
| CPU_ANY_AVX512PF_FLAGS, CPU_ANY_AVX512DQ_FLAGS, | |
| CPU_ANY_AVX512BW_FLAGS, CPU_ANY_AVX512VL_FLAGS, | |
| CPU_ANY_AVX512IFMA_FLAGS and CPU_ANY_AVX512VBMI_FLAGS. | |
| * i386-init.h: Regenerated. | |
| 2016-05-27 H.J. Lu <hongjiu.lu@intel.com> | |
| PR gas/20145 | |
| * i386-gen.c (cpu_flag_init): Update CPU_XXX_FLAGS. Remove | |
| CpuMMX from CPU_SSE_FLAGS. Remove AVX and AVX512 bits from | |
| CPU_ANY_SSE_FLAGS. Remove AVX512 bits from CPU_ANY_AVX_FLAGS. | |
| Add CPU_XSAVE_FLAGS to CPU_XSAVEOPT_FLAGS, CPU_XSAVE_FLAGS and | |
| CpuXSAVEC. Add CPU_AVX_FLAGS to CpuF16C. Remove CpuMMX from | |
| CPU_AVX512F_FLAGS, CPU_AVX512CD_FLAGS, CPU_AVX512ER_FLAGS, | |
| CPU_AVX512PF_FLAGS, CPU_AVX512DQ_FLAGS and CPU_AVX512BW_FLAGS. | |
| Add CPU_SSE2_FLAGS to CPU_SHA_FLAGS. Add CPU_ANY_287_FLAGS, | |
| CPU_ANY_387_FLAGS, CPU_ANY_687_FLAGS, CPU_ANY_SSE2_FLAGS, | |
| CPU_ANY_SSE3_FLAGS, CPU_ANY_SSSE3_FLAGS, CPU_ANY_SSE4_1_FLAGS, | |
| CPU_ANY_SSE4_2_FLAGS and CPU_ANY_AVX2_FLAGS. Enable CpuRegMMX | |
| for MMX. Enable CpuRegXMM for SSE, AVX and AVX512. Enable | |
| CpuRegYMM for AVX and AVX512VL, Enable CpuRegZMM and | |
| CpuRegMask for AVX512. | |
| (cpu_flags): Add CpuRegMMX, CpuRegXMM, CpuRegYMM, CpuRegZMM | |
| and CpuRegMask. | |
| (set_bitfield_from_cpu_flag_init): New function. | |
| (set_bitfield): Remove const on f. Call | |
| set_bitfield_from_cpu_flag_init to handle CPU_XXX_FLAGS. | |
| * i386-opc.h (CpuRegMMX): New. | |
| (CpuRegXMM): Likewise. | |
| (CpuRegYMM): Likewise. | |
| (CpuRegZMM): Likewise. | |
| (CpuRegMask): Likewise. | |
| (i386_cpu_flags): Add cpuregmmx, cpuregxmm, cpuregymm, cpuregzmm | |
| and cpuregmask. | |
| * i386-init.h: Regenerated. | |
| * i386-tbl.h: Likewise. | |
| 2016-05-27 H.J. Lu <hongjiu.lu@intel.com> | |
| PR gas/20154 | |
| * i386-gen.c (cpu_flags): Remove CpuAMD64 and CpuIntel64. | |
| (opcode_modifiers): Add AMD64 and Intel64. | |
| (main): Properly verify CpuMax. | |
| * i386-opc.h (CpuAMD64): Removed. | |
| (CpuIntel64): Likewise. | |
| (CpuMax): Set to CpuNo64. | |
| (i386_cpu_flags): Remove cpuamd64 and cpuintel64. | |
| (AMD64): New. | |
| (Intel64): Likewise. | |
| (i386_opcode_modifier): Add amd64 and intel64. | |
| (i386-opc.tbl): Replace CpuAMD64/CpuIntel64 with AMD64/Intel64 | |
| on call and jmp. | |
| * i386-init.h: Regenerated. | |
| * i386-tbl.h: Likewise. | |
| 2016-05-27 H.J. Lu <hongjiu.lu@intel.com> | |
| PR gas/20154 | |
| * i386-gen.c (main): Fail if CpuMax is incorrect. | |
| * i386-opc.h (CpuMax): Set to CpuIntel64. | |
| * i386-tbl.h: Regenerated. | |
| 2016-05-27 Nick Clifton <nickc@redhat.com> | |
| PR target/20150 | |
| * msp430-dis.c (msp430dis_read_two_bytes): New function. | |
| (msp430dis_opcode_unsigned): New function. | |
| (msp430dis_opcode_signed): New function. | |
| (msp430_singleoperand): Use the new opcode reading functions. | |
| Only disassenmble bytes if they were successfully read. | |
| (msp430_doubleoperand): Likewise. | |
| (msp430_branchinstr): Likewise. | |
| (msp430x_callx_instr): Likewise. | |
| (print_insn_msp430): Check that it is safe to read bytes before | |
| attempting disassembly. Use the new opcode reading functions. | |
| 2016-05-26 Peter Bergner <bergner@vnet.ibm.com> | |
| * ppc-opc.c (CY): New define. Document it. | |
| (powerpc_opcodes) <addex[.], lwzmx, vmsumudm>: New mnemonics. | |
| 2016-05-25 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-gen.c (cpu_flag_init): Add CpuVREX to CPU_AVX512DQ_FLAGS, | |
| CPU_AVX512BW_FLAGS, CPU_AVX512VL_FLAGS, CPU_AVX512IFMA_FLAGS | |
| and CPU_AVX512VBMI_FLAGS. Add CpuAVX512DQ, CpuAVX512BW, | |
| CpuAVX512VL, CpuAVX512IFMA and CpuAVX512VBMI to | |
| CPU_ANY_AVX_FLAGS. | |
| * i386-init.h: Regenerated. | |
| 2016-05-25 H.J. Lu <hongjiu.lu@intel.com> | |
| PR gas/20141 | |
| * i386-gen.c (cpu_flag_init): Add CpuVREX to CPU_AVX512F_FLAGS, | |
| CPU_AVX512CD_FLAGS, CPU_AVX512ER_FLAGS and CPU_AVX512PF_FLAGS. | |
| * i386-init.h: Regenerated. | |
| 2016-05-25 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-gen.c (cpu_flag_init): Rename CPU_ANY87_FLAGS to | |
| CPU_ANY_X87_FLAGS. Add CPU_ANY_MMX_FLAGS. | |
| * i386-init.h: Regenerated. | |
| 2016-05-23 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-dis.c (print_flags): Set branch_delay_insns, and insn_type | |
| information. | |
| (print_insn_arc): Set insn_type information. | |
| * arc-opc.c (C_CC): Add F_CLASS_COND. | |
| * arc-tbl.h (bbit0, bbit1): Update subclass to COND. | |
| (beq_s, bge_s, bgt_s, bhi_s, bhs_s): Likewise. | |
| (ble_s, blo_s, bls_s, blt_s, bne_s): Likewise. | |
| (breq, breq_s, brge, brhs, brlo, brlt): Likewise. | |
| (brne, brne_s, jeq_s, jne_s): Likewise. | |
| 2016-05-23 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-tbl.h (neg): New instruction variant. | |
| 2016-05-23 Cupertino Miranda <cmiranda@synopsys.com> | |
| * arc-dis.c (find_format, find_format, get_auxreg) | |
| (print_insn_arc): Changed. | |
| * arc-ext.h (INSERT_XOP): Likewise. | |
| 2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> | |
| * tic54x-dis.c (sprint_mmr): Adjust. | |
| * tic54x-opc.c: Likewise. | |
| 2016-05-19 Alan Modra <amodra@gmail.com> | |
| * ppc-opc.c (NSISIGNOPT): Use insert_nsi and extract_nsi. | |
| 2016-05-19 Alan Modra <amodra@gmail.com> | |
| * ppc-opc.c: Formatting. | |
| (NSISIGNOPT): Define. | |
| (powerpc_opcodes <subis>): Use NSISIGNOPT. | |
| 2016-05-18 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand, | |
| replacing references to `micromips_ase' throughout. | |
| (_print_insn_mips): Don't use file-level microMIPS annotation to | |
| determine the disassembly mode with the symbol table. | |
| 2016-05-13 Peter Bergner <bergner@vnet.ibm.com> | |
| * ppc-opc.c (IMM8): Use PPC_OPERAND_SIGNOPT. | |
| 2016-05-11 Andrew Bennett <andrew.bennett@imgtec.com> | |
| * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and | |
| mips64r6. | |
| * mips-opc.c (D34): New macro. | |
| (mips_builtin_opcodes): Define bposge32c for DSPr3. | |
| 2016-05-10 Alexander Fomin <alexander.fomin@intel.com> | |
| * i386-dis.c (prefix_table): Add RDPID instruction. | |
| * i386-gen.c (cpu_flag_init): Add RDPID flag. | |
| (cpu_flags): Add RDPID bitfield. | |
| * i386-opc.h (enum): Add RDPID element. | |
| (i386_cpu_flags): Add RDPID field. | |
| * i386-opc.tbl: Add RDPID instruction. | |
| * i386-init.h: Regenerate. | |
| * i386-tbl.h: Regenerate. | |
| 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> | |
| * arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get | |
| branch type of a symbol. | |
| (print_insn): Likewise. | |
| 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> | |
| * arm-dis.c (coprocessor_opcodes): Add entries for VFP ARMv8-M | |
| Mainline Security Extensions instructions. | |
| (thumb_opcodes): Add entries for narrow ARMv8-M Security | |
| Extensions instructions. | |
| (thumb32_opcodes): Add entries for wide ARMv8-M Security Extensions | |
| instructions. | |
| (psr_name): Add new MSP_NS and PSP_NS ARMv8-M Security Extensions | |
| special registers. | |
| 2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com> | |
| * sparc-opc.c (sparc_opcodes): Fix mnemonic of faligndatai. | |
| 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-ext.c (dump_ARC_extmap): Handle SYNATX_NOP and SYNTAX_1OP. | |
| (arcExtMap_genOpcode): Likewise. | |
| * arc-opc.c (arg_32bit_rc): Define new variable. | |
| (arg_32bit_u6): Likewise. | |
| (arg_32bit_limm): Likewise. | |
| 2016-05-03 Szabolcs Nagy <szabolcs.nagy@arm.com> | |
| * aarch64-gen.c (VERIFIER): Define. | |
| * aarch64-opc.c (VERIFIER): Define. | |
| (verify_ldpsw): Use static linkage. | |
| * aarch64-opc.h (verify_ldpsw): Remove. | |
| * aarch64-tbl.h: Use VERIFIER for verifiers. | |
| 2016-04-28 Nick Clifton <nickc@redhat.com> | |
| PR target/19722 | |
| * aarch64-dis.c (aarch64_opcode_decode): Run verifier if present. | |
| * aarch64-opc.c (verify_ldpsw): New function. | |
| * aarch64-opc.h (verify_ldpsw): New prototype. | |
| * aarch64-tbl.h: Add initialiser for verifier field. | |
| (LDPSW): Set verifier to verify_ldpsw. | |
| 2016-04-23 H.J. Lu <hongjiu.lu@intel.com> | |
| PR binutils/19983 | |
| PR binutils/19984 | |
| * i386-dis.c (print_insn): Return -1 if size of bfd_vma is | |
| smaller than address size. | |
| 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> | |
| * alpha-dis.c: Regenerate. | |
| * crx-dis.c: Likewise. | |
| * disassemble.c: Likewise. | |
| * epiphany-opc.c: Likewise. | |
| * fr30-opc.c: Likewise. | |
| * frv-opc.c: Likewise. | |
| * ip2k-opc.c: Likewise. | |
| * iq2000-opc.c: Likewise. | |
| * lm32-opc.c: Likewise. | |
| * lm32-opinst.c: Likewise. | |
| * m32c-opc.c: Likewise. | |
| * m32r-opc.c: Likewise. | |
| * m32r-opinst.c: Likewise. | |
| * mep-opc.c: Likewise. | |
| * mt-opc.c: Likewise. | |
| * or1k-opc.c: Likewise. | |
| * or1k-opinst.c: Likewise. | |
| * tic80-opc.c: Likewise. | |
| * xc16x-opc.c: Likewise. | |
| * xstormy16-opc.c: Likewise. | |
| 2016-04-19 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-nps400-tbl.h: Add addb, subb, adcb, sbcb, andb, xorb, orb, | |
| fxorb, wxorb, shlb, shrb, notb, cntbb, div, mod, divm, qcmp, | |
| calcsd, and calcxd instructions. | |
| * arc-opc.c (insert_nps_bitop_size): Delete. | |
| (extract_nps_bitop_size): Delete. | |
| (MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Define, and use. | |
| (extract_nps_qcmp_m3): Define. | |
| (extract_nps_qcmp_m2): Define. | |
| (extract_nps_qcmp_m1): Define. | |
| (arc_flag_operands): Add F_NPS_SX, F_NPS_AR, F_NPS_AL. | |
| (arc_flag_classes): Add C_NPS_SX, C_NPS_AR_AL | |
| (arc_operands): Add NPS_SRC2_POS, NPS_SRC1_POS, NPS_ADDB_SIZE, | |
| NPS_ANDB_SIZE, NPS_FXORB_SIZ, NPS_WXORB_SIZ, NPS_R_XLDST, | |
| NPS_DIV_UIMM4, NPS_QCMP_SIZE, NPS_QCMP_M1, NPS_QCMP_M2, and | |
| NPS_QCMP_M3. | |
| 2016-04-19 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-nps400-tbl.h: Add dctcp, dcip, dcet, and dcacl instructions. | |
| 2016-04-15 H.J. Lu <hongjiu.lu@intel.com> | |
| * Makefile.in: Regenerated with automake 1.11.6. | |
| * aclocal.m4: Likewise. | |
| 2016-04-14 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst | |
| instructions. | |
| * arc-opc.c (insert_nps_cmem_uimm16): New function. | |
| (extract_nps_cmem_uimm16): New function. | |
| (arc_operands): Add NPS_XLDST_UIMM16 operand. | |
| 2016-04-14 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-dis.c (arc_insn_length): New function. | |
| (print_insn_arc): Use arc_insn_length, change insnLen to unsigned. | |
| (find_format): Change insnLen parameter to unsigned. | |
| 2016-04-13 Nick Clifton <nickc@redhat.com> | |
| PR target/19937 | |
| * v850-opc.c (v850_opcodes): Correct masks for long versions of | |
| the LD.B and LD.BU instructions. | |
| 2016-04-12 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-dis.c (find_format): Check for extension flags. | |
| (print_flags): New function. | |
| (print_insn_arc): Update for .extCondCode, .extCoreRegister and | |
| .extAuxRegister. | |
| * arc-ext.c (arcExtMap_coreRegName): Use | |
| LAST_EXTENSION_CORE_REGISTER. | |
| (arcExtMap_coreReadWrite): Likewise. | |
| (dump_ARC_extmap): Update printing. | |
| * arc-opc.c (arc_flag_classes): Add F_CLASS_EXTEND flag. | |
| (arc_aux_regs): Add cpu field. | |
| * arc-regs.h: Add cpu field, lower case name aux registers. | |
| 2016-04-12 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-tbl.h: Add rtsc, sleep with no arguments. | |
| 2016-04-12 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-opc.c (flags_none, flags_f, flags_cc, flags_ccf): | |
| Initialize. | |
| (arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc) | |
| (arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6) | |
| (arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm) | |
| (arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm) | |
| (arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12) | |
| (arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc) | |
| (arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm) | |
| (arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6) | |
| (arg_32bit_limms12, arg_32bit_limmlimm): Likewise. | |
| (arc_opcode arc_opcodes): Null terminate the array. | |
| (arc_num_opcodes): Remove. | |
| * arc-ext.h (INSERT_XOP): Define. | |
| (extInstruction_t): Likewise. | |
| (arcExtMap_instName): Delete. | |
| (arcExtMap_insn): New function. | |
| (arcExtMap_genOpcode): Likewise. | |
| * arc-ext.c (ExtInstruction): Remove. | |
| (create_map): Zero initialize instruction fields. | |
| (arcExtMap_instName): Remove. | |
| (arcExtMap_insn): New function. | |
| (dump_ARC_extmap): More info while debugging. | |
| (arcExtMap_genOpcode): New function. | |
| * arc-dis.c (find_format): New function. | |
| (print_insn_arc): Use find_format. | |
| (arc_get_disassembler): Enable dump_ARC_extmap only when | |
| debugging. | |
| 2016-04-11 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_mips16_insn_arg): Mask unused extended | |
| instruction bits out. | |
| 2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-nps400-tbl.h: Add schd, sync, and hwschd instructions. | |
| * arc-opc.c (arc_flag_operands): Add new flags. | |
| (arc_flag_classes): Add new classes. | |
| 2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-opc.c (arc_opcodes): Extend comment to discus table layout. | |
| 2016-04-05 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-nps400-tbl.h: Add movbi, decode1, fbset, fbclear, encode0, | |
| encode1, rflt, crc16, and crc32 instructions. | |
| * arc-opc.c (arc_flag_operands): Add F_NPS_R. | |
| (arc_flag_classes): Add C_NPS_R. | |
| (insert_nps_bitop_size_2b): New function. | |
| (extract_nps_bitop_size_2b): Likewise. | |
| (insert_nps_bitop_uimm8): Likewise. | |
| (extract_nps_bitop_uimm8): Likewise. | |
| (arc_operands): Add new operand entries. | |
| 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-regs.h: Add a new subclass field. Add double assist | |
| accumulator register values. | |
| * arc-tbl.h: Use DPA subclass to mark the double assist | |
| instructions. Use DPX/SPX subclas to mark the FPX instructions. | |
| * arc-opc.c (RSP): Define instead of SP. | |
| (arc_aux_regs): Add the subclass field. | |
| 2016-04-05 Jiong Wang <jiong.wang@arm.com> | |
| * arm-dis.c: Support FP16 vmul, vmla, vmls (by scalar). | |
| 2016-03-31 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-opc.c (arc_operands): Fix operand flags for NPS_R_DST, and | |
| NPS_R_SRC1. | |
| 2016-03-30 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-nps400-tbl.h: Add a header comment, and fix some whitespace | |
| issues. No functional changes. | |
| 2016-03-30 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-regs.h (IC_RAM_ADDRESS, IC_TAG, IC_WP, IC_DATA, CONTROL0) | |
| (AX2, AY2, MX2, MY2, AY0, AY1, DC_RAM_ADDR, DC_TAG, CONTROL1) | |
| (RTT): Remove duplicate. | |
| (LCDINSTR, LCDDATA, LCDSTAT, CC_*, PCT_COUNT*, PCT_SNAP*) | |
| (PCT_CONFIG*): Remove. | |
| (D1L, D1H, D2H, D2L): Define. | |
| 2016-03-29 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-ext-tbl.h (dsp_fp_i2flt): Fix typo. | |
| 2016-03-29 Claudiu Zissulescu <claziss@synopsys.com> | |
| * arc-tbl.h (invld07): Remove. | |
| * arc-ext-tbl.h: New file. | |
| * arc-dis.c (FIELDA, FIELDB, FIELDC): Remove. | |
| * arc-opc.c (arc_opcodes): Add ext-tbl include. | |
| 2016-03-24 Jan Kratochvil <jan.kratochvil@redhat.com> | |
| Fix -Wstack-usage warnings. | |
| * aarch64-dis.c (print_operands): Substitute size. | |
| * aarch64-opc.c (print_register_offset_address): Substitute tblen. | |
| 2016-03-22 Jose E. Marchesi <jose.marchesi@oracle.com> | |
| * sparc-opc.c (sparc_opcodes): Reorder entries for `rd' in order | |
| to get a proper diagnostic when an invalid ASR register is used. | |
| 2016-03-22 Nick Clifton <nickc@redhat.com> | |
| * configure: Regenerate. | |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-nps400-tbl.h: New file. | |
| * arc-opc.c: Add top level comment. | |
| (insert_nps_3bit_dst): New function. | |
| (extract_nps_3bit_dst): New function. | |
| (insert_nps_3bit_src2): New function. | |
| (extract_nps_3bit_src2): New function. | |
| (insert_nps_bitop_size): New function. | |
| (extract_nps_bitop_size): New function. | |
| (arc_flag_operands): Add nps400 entries. | |
| (arc_flag_classes): Add nps400 entries. | |
| (arc_operands): Add nps400 entries. | |
| (arc_opcodes): Add nps400 include. | |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-opc.c (arc_flag_classes): Convert all flag classes to use | |
| the new class enum values. | |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-dis.c (print_insn_arc): Handle nps400. | |
| 2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * arc-opc.c (BASE): Delete. | |
| 2016-03-18 Nick Clifton <nickc@redhat.com> | |
| PR target/19721 | |
| * aarch64-tbl.h (aarch64_opcode_table): Fix type of second operand | |
| of MOV insn that aliases an ORR insn. | |
| 2016-03-16 Jiong Wang <jiong.wang@arm.com> | |
| * arm-dis.c (neon_opcodes): Support new FP16 instructions. | |
| 2016-03-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> | |
| * mcore-opc.h: Add const qualifiers. | |
| * microblaze-opc.h (struct op_code_struct): Likewise. | |
| * sh-opc.h: Likewise. | |
| * tic4x-dis.c (tic4x_print_indirect): Likewise. | |
| (tic4x_print_op): Likewise. | |
| 2016-03-02 Alan Modra <amodra@gmail.com> | |
| * or1k-desc.h: Regenerate. | |
| * fr30-ibld.c: Regenerate. | |
| * rl78-decode.c: Regenerate. | |
| 2016-03-01 Nick Clifton <nickc@redhat.com> | |
| PR target/19747 | |
| * rl78-dis.c (print_insn_rl78_common): Fix typo. | |
| 2016-02-24 Renlin Li <renlin.li@arm.com> | |
| * arm-dis.c (coprocessor_opcodes): Add fp16 instruction entries. | |
| (print_insn_coprocessor): Support fp16 instructions. | |
| 2016-02-24 Renlin Li <renlin.li@arm.com> | |
| * arm-dis.c (print_insn_coprocessor): Fix mask for vsel, vmaxnm, | |
| vminnm, vrint(mpna). | |
| 2016-02-24 Renlin Li <renlin.li@arm.com> | |
| * arm-dis.c (print_insn_coprocessor): Check co-processor number for | |
| cpd/cpd2, mcr/mcr2, mrc/mrc2, ldc/ldc2, stc/stc2. | |
| 2016-02-15 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-dis.c (print_insn): Parenthesize expression to prevent | |
| truncated addresses. | |
| (OP_J): Likewise. | |
| 2016-02-10 Claudiu Zissulescu <claziss@synopsys.com> | |
| Janek van Oirschot <jvanoirs@synopsys.com> | |
| * arc-opc.c (arc_relax_opcodes, arc_num_relax_opcodes): New | |
| variable. | |
| 2016-02-04 Nick Clifton <nickc@redhat.com> | |
| PR target/19561 | |
| * msp430-dis.c (print_insn_msp430): Add a special case for | |
| decoding an RRC instruction with the ZC bit set in the extension | |
| word. | |
| 2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * cgen-ibld.in (insert_normal): Rework calculation of shift. | |
| * epiphany-ibld.c: Regenerate. | |
| * fr30-ibld.c: Regenerate. | |
| * frv-ibld.c: Regenerate. | |
| * ip2k-ibld.c: Regenerate. | |
| * iq2000-ibld.c: Regenerate. | |
| * lm32-ibld.c: Regenerate. | |
| * m32c-ibld.c: Regenerate. | |
| * m32r-ibld.c: Regenerate. | |
| * mep-ibld.c: Regenerate. | |
| * mt-ibld.c: Regenerate. | |
| * or1k-ibld.c: Regenerate. | |
| * xc16x-ibld.c: Regenerate. | |
| * xstormy16-ibld.c: Regenerate. | |
| 2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com> | |
| * epiphany-dis.c: Regenerated from latest cpu files. | |
| 2016-02-01 Michael McConville <mmcco@mykolab.com> | |
| * cgen-dis.c (count_decodable_bits): Use unsigned value for mask | |
| test bit. | |
| 2016-01-25 Renlin Li <renlin.li@arm.com> | |
| * arm-dis.c (mapping_symbol_for_insn): New function. | |
| (find_ifthen_state): Call mapping_symbol_for_insn(). | |
| 2016-01-20 Matthew Wahab <matthew.wahab@arm.com> | |
| * aarch64-opc.c (operand_general_constraint_met_p): Check validity | |
| of MSR UAO immediate operand. | |
| 2016-01-18 Maciej W. Rozycki <macro@imgtec.com> | |
| * mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS | |
| instruction support. | |
| 2016-01-17 Alan Modra <amodra@gmail.com> | |
| * configure: Regenerate. | |
| 2016-01-14 Nick Clifton <nickc@redhat.com> | |
| * rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw | |
| instructions that can support stack pointer operations. | |
| * rl78-decode.c: Regenerate. | |
| * rl78-dis.c: Fix display of stack pointer in MOVW based | |
| instructions. | |
| 2016-01-14 Matthew Wahab <matthew.wahab@arm.com> | |
| * aarch64-opc.c (aarch64_sys_reg_supported_p): Merge conditionals | |
| testing for RAS support. Add checks for erxfr_el1, erxctlr_el1, | |
| erxtatus_el1 and erxaddr_el1. | |
| 2016-01-12 Matthew Wahab <matthew.wahab@arm.com> | |
| * arm-dis.c (arm_opcodes): Add "esb". | |
| (thumb_opcodes): Likewise. | |
| 2016-01-11 Peter Bergner <bergner@vnet.ibm.com> | |
| * ppc-opc.c <xscmpnedp>: Delete. | |
| <xvcmpnedp>: Likewise. | |
| <xvcmpnedp.>: Likewise. | |
| <xvcmpnesp>: Likewise. | |
| <xvcmpnesp.>: Likewise. | |
| 2016-01-08 Andreas Schwab <schwab@linux-m68k.org> | |
| PR gas/13050 | |
| * m68k-opc.c (moveb, movew): For ISA_B/C only allow #,d(An) in | |
| addition to ISA_A. | |
| 2016-01-01 Alan Modra <amodra@gmail.com> | |
| Update year range in copyright notice of all files. | |
| For older changes see ChangeLog-2015 | |
| Copyright (C) 2016 Free Software Foundation, Inc. | |
| Copying and distribution of this file, with or without modification, | |
| are permitted in any medium without royalty provided the copyright | |
| notice and this notice are preserved. | |
| Local Variables: | |
| mode: change-log | |
| left-margin: 8 | |
| fill-column: 74 | |
| version-control: never | |
| End: |