gdb/testsuite/gdb.reverse/step-reverse.exp

# Copyright 2008-2023 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

# This file is part of the GDB testsuite.  It tests reverse stepping.
# Lots of code borrowed from "step-test.exp".

#
# Test step and next in reverse
#

require supports_reverse

standard_testfile

if { [prepare_for_testing "failed to prepare" $testfile $srcfile] } {
    return -1
}

runto_main
set target_remote [gdb_is_target_remote]

if [supports_process_record] {
    # Activate process record/replay
    gdb_test_no_output "record" "turn on process record"
}

# plain vanilla step/next (no count)

gdb_test "next" ".*NEXT TEST 1.*" "next test 1"
gdb_test "step" ".*STEP TEST 1.*" "step test 1"

# step/next with count

gdb_test "next 2" ".*NEXT TEST 2.*" "next test 2"
gdb_test "step 3" ".*STEP TEST 2.*" "step test 2"

# Next through a recursive function call.
gdb_test "next 2" "NEXT OVER THIS CALL.*" "next over recursion"

# step over call

gdb_test "next" ".*STEP INTO THIS CALL.*" "next over call"

# step into call

gdb_test "step" ".*ARRIVED IN CALLEE.*" "step into call"

# finish out of call

set test_message "finish out of fn call"
gdb_test_multiple "finish" "$test_message" {
    -re "FINISH TEST.*$gdb_prompt $" {
	pass "$test_message"
    }
    -re "STEP INTO THIS CALL.*$gdb_prompt $" {
	send_gdb "step\n"
	exp_continue
    }
}

# stepi over flat code (no calls)

set test_message "simple stepi"
gdb_test_multiple "stepi" "$test_message" {
    -re "STEPI TEST.*$gdb_prompt $" {
	pass "$test_message"
    }
    -re "FINISH TEST.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "NEXTI TEST.*$gdb_prompt $" {
	fail "$test_message (too far)"
    }
}

# stepi into a function call

set alphanum_re "\[a-zA-Z0-9\]"
set pic_thunk_re  "__$alphanum_re*\\.get_pc_thunk\\.$alphanum_re* \\(\\)"
set test_message "stepi into function call"
gdb_test_multiple "stepi" "$test_message" {
    -re "ARRIVED IN CALLEE.*$gdb_prompt $" {
	pass "$test_message"
    }
    -re "NEXTI TEST.*$gdb_prompt $" {
	fail "$test_message (too far)"
    }
    -re "RETURN FROM CALLEE.*$gdb_prompt $" {
	fail "$test_message (too far)"
    }
    -re "ENTER CALLEE.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "STEPI TEST.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "$pic_thunk_re.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
}

# stepi thru return of a function call

set test_message "stepi back from function call"
gdb_test_multiple "stepi" "$test_message" {
    -re -wrap "NEXTI TEST.*" {
	pass "$test_message"
    }
    -re "ARRIVED IN CALLEE.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "RETURN FROM CALLEE.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "STEPI TEST.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "ENTER CALLEE.*$gdb_prompt $" {
	fail "$test_message (too far)"
    }
}

###
###
###

# Set reverse execution direction
gdb_test_no_output "set exec-dir reverse" "set reverse execution"

# stepi backward thru return and into a function

set stepi_location  [gdb_get_line_number "ARRIVED IN CALLEE" "$srcfile"]
set test_message "reverse stepi thru function return"
gdb_test_multiple "stepi" "$test_message" {
    -re "NEXTI TEST.*$gdb_prompt $" {
	fail "$test_message (start statement)"
    }
    -re "RETURN FROM CALLEE.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "$hex\[ \t\]*$stepi_location.*ARRIVED IN CALLEE.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "ARRIVED IN CALLEE.*$gdb_prompt $" {
	pass "$test_message"
    }
    -re "ENTER CALLEE.*$gdb_prompt $" {
	fail "$test_message (too far)"
    }
    -re "STEPI TEST.*$gdb_prompt $" {
	fail "$test_message (too far)"
    }
}

# stepi backward out of a function call

set stepi_location  [gdb_get_line_number "STEPI TEST" "$srcfile"]
set test_message "reverse stepi from a function call"
gdb_test_multiple "stepi" "$test_message" {
    -re "ARRIVED IN CALLEE.*$gdb_prompt $" {
	fail "$test_message (start statement)"
    }
    -re "ENTER CALLEE.*$gdb_prompt $" {
	send_gdb "stepi\n" 
	exp_continue
    }
    -re "$pic_thunk_re.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "${hex} in main .*:$stepi_location.*STEPI TEST.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "STEPI TEST.*$gdb_prompt $" {
	pass "$test_message"
    }
    -re "STEP INTO THIS CALL.*$gdb_prompt $" {
	fail "$test_message (too far)"
    }
}

# stepi backward over flat code (no calls)

set stepi_location  [gdb_get_line_number "FINISH TEST" "$srcfile"]
set test_message "simple reverse stepi"
gdb_test_multiple "stepi" "$test_message" {
    -re "STEPI TEST.*$gdb_prompt $" {
	fail "$test_message (start statement)"
    }
    -re "$hex\[ \t\]*$stepi_location.* FINISH TEST.*$gdb_prompt $" {
	send_gdb "stepi\n"
	exp_continue
    }
    -re "$stepi_location.* FINISH TEST.*$gdb_prompt $" {
	pass "$test_message"
    }
    -re "STEP INTO THIS CALL.*$gdb_prompt $" {
	fail "$test_message (too far)"
    }
}

# step backward into function (thru return)

gdb_test "step" "(RETURN FROM CALLEE|ARRIVED IN CALLEE).*" \
    "reverse step into fn call"

# step backward out of called function (thru call)

set test_message "reverse step out of called fn"
gdb_test_multiple "step" "$test_message" {
    -re "STEP INTO THIS CALL.*.*$gdb_prompt $" {
	pass "$test_message"
    }
    -re "ARRIVED IN CALLEE.*$gdb_prompt $" {
	send_gdb "step\n"
	exp_continue
    }
    -re "ENTER CALLEE.*$gdb_prompt $" {
	send_gdb "step\n"
	exp_continue
    }
}

# Next backward over call.

gdb_test "next" ".*NEXT OVER THIS CALL.*" "reverse next over call"

set step_out 0
gdb_test_multiple "next" "reverse next over recursion" {
    -re -wrap ".*NEXT OVER THIS RECURSION.*" {
	pass "$gdb_test_name"
    }
    -re -wrap ".*RECURSIVE CALL.*" {
	fail "$gdb_test_name"
	set step_out 1
    }
}
if { "$step_out" == 1 } {
    gdb_test_multiple "next" "stepping out of recursion" {
	-re -wrap "NEXT OVER THIS RECURSION.*" {
	    set step_out 0
	}
	-re -wrap ".*" {
	    send_gdb "next\n"
	    exp_continue
	}
    }
}

# Step forward over recursion again so we can test stepping over calls
# inside the recursion itself.
gdb_test_no_output "set exec-dir forward" "forward again to test recursion"
if {$target_remote} {
    # gdb doesn't record the change of return pointer for remote targets,
    # so we can't next forward over functions.
    setup_kfail gdb/29745 *-*-*
}
gdb_test "next" "NEXT OVER THIS CALL.*" "reverse next over recursion again"
gdb_test_no_output "set exec-dir reverse" "reverse again to test recursion"

if {$target_remote} {
    # Because of the above mentioned KFAIL, the inferior is now out of sync
    setup_kfail gdb/29745 *-*-*
}
gdb_test "step" ".*EXIT RECURSIVE FUNCTION.*" "enter recursive function"
set seen_recursive_call 0
if {$target_remote} {
    # Because of the above mentioned KFAIL, the inferior is now out of sync
    # The fail state below will resync the inferior.
    setup_kfail gdb/29745 *-*-*
}
gdb_test_multiple "next" "step over recursion inside the recursion" {
    -re -wrap ".*RECURSIVE CALL.*" {
	incr seen_recursive_call
	send_gdb "next\n"
	exp_continue
    }
    -re -wrap ".*NEXT OVER THIS RECURSION.*" {
	gdb_assert {"$seen_recursive_call" == 1} \
	    "step over recursion inside the recursion"
    }
    -re -wrap ".*" {
	send_gdb "next\n"
	exp_continue
    }
}

# step/next backward with count

gdb_test "step 3" ".*REVERSE STEP TEST 1.*" "reverse step test 1"
gdb_test "next 2" ".*REVERSE NEXT TEST 1.*" "reverse next test 1"

# step/next backward without count

gdb_test "step" ".*STEP TEST 1.*" "reverse step test 2"
gdb_test "next" ".*NEXT TEST 1.*" "reverse next test 2"



# Finish test by running forward to the end.
# FIXME return to this later...
# gdb_test_no_output "set exec-dir forward" "set forward execution"
# gdb_continue_to_end "step-reverse.exp"