| 2019-03-22 Alan Hayward <alan.hayward@arm.com> |
| Jiong Wang <jiong.wang@arm.com> |
| |
| * aarch64-tdep.c (aarch64_frame_unmask_address): New function. |
| (aarch64_dwarf2_prev_register): Unmask PC value. |
| (aarch64_dwarf2_frame_init_reg): Init pauth registers. |
| (aarch64_execute_dwarf_cfa_vendor_op): Check for |
| DW_CFA_AARCH64_negate_ra_state. |
| (aarch64_gdbarch_init): Add aarch64_execute_dwarf_cfa_vendor_op. |
| |
| 2019-03-22 Alan Hayward <alan.hayward@arm.com> |
| Jiong Wang <jiong.wang@arm.com> |
| |
| * aarch64-tdep.c (aarch64_dwarf_reg_to_regnum): Check for pauth |
| registers. |
| (aarch64_pseudo_register_name): Likewise. |
| (aarch64_pseudo_register_type): Likewise. |
| (aarch64_pseudo_register_reggroup_p): Likewise. |
| (aarch64_gdbarch_init): Add pauth registers. |
| * aarch64-tdep.h (AARCH64_DWARF_PAUTH_RA_STATE): New define. |
| (AARCH64_DWARF_PAUTH_DMASK): Likewise. |
| (AARCH64_DWARF_PAUTH_CMASK): Likewise. |
| (struct gdbarch_tdep): Add regnum for ra_state. |
| |
| 2019-03-22 Alan Hayward <alan.hayward@arm.com> |
| Jiong Wang <jiong.wang@arm.com> |
| |
| * arch/aarch64.h (AARCH64_PAUTH_REGS_SIZE): New define. |
| |
| 2019-03-22 Alan Hayward <alan.hayward@arm.com> |
| Jiong Wang <jiong.wang@arm.com> |
| |
| * aarch64-linux-nat.c (fetch_pauth_masks_from_thread): New |
| function. |
| (aarch64_linux_nat_target::fetch_registers): Read pauth registers. |
| * aarch64-tdep.c (aarch64_cannot_store_register): New function. |
| (aarch64_gdbarch_init): Add puth registers. |
| * aarch64-tdep.h (struct gdbarch_tdep): Add pauth features. |
| * arch/aarch64.h (AARCH64_PAUTH_DMASK_REGNUM): New define. |
| (AARCH64_PAUTH_CMASK_REGNUM): Likewise. |
| |
| 2019-03-22 Alan Hayward <alan.hayward@arm.com> |
| Jiong Wang <jiong.wang@arm.com> |
| |
| * aarch64-linux-nat.c |
| (aarch64_linux_nat_target::read_description): Read PACA hwcap. |
| * aarch64-linux-tdep.c |
| (aarch64_linux_core_read_description): Likewise. |
| (aarch64_linux_get_hwcap): New function. |
| * aarch64-linux-tdep.h (AARCH64_HWCAP_PACA): New define. |
| (aarch64_linux_get_hwcap): New declaration. |
| |
| 2019-03-22 Alan Hayward <alan.hayward@arm.com> |
| Jiong Wang <jiong.wang@arm.com> |
| |
| * aarch64-linux-nat.c |
| (aarch64_linux_nat_target::read_description): Add pauth param. |
| * aarch64-linux-tdep.c |
| (aarch64_linux_core_read_description): Likewise. |
| * aarch64-tdep.c (struct target_desc): Add in pauth. |
| (aarch64_read_description): Add pauth param. |
| (aarch64_gdbarch_init): Likewise. |
| * aarch64-tdep.h (aarch64_read_description): Likewise. |
| * arch/aarch64.c (aarch64_create_target_description): Likewise. |
| * arch/aarch64.h (aarch64_create_target_description): Likewise. |
| * features/Makefile: Add new files. |
| * features/aarch64-pauth.c: New file. |
| * features/aarch64-pauth.xml: New file. |
| |
| 2019-03-20 Tom Tromey <tromey@adacore.com> |
| |
| * infrun.c (handle_inferior_event): Rename from |
| handle_inferior_event_1. Create a scoped_value_mark. |
| (handle_inferior_event): Remove. |
| |
| 2019-03-19 Tom Tromey <tromey@adacore.com> |
| |
| * mi/mi-interp.c (mi_on_normal_stop_1): Only show displays once. |
| * infrun.h (print_stop_event): Add "displays" parameter. |
| * infrun.c (print_stop_event): Add "displays" parameter. |
| |
| 2019-03-19 Pedro Alves <palves@redhat.com> |
| |
| * tui/tui-out.c (tui_ui_out::do_field_string): Simplify. |
| (tui_ui_out::do_text): Add comments. Reset M_LINE to 0 instead of |
| to -1. Fix TABs vs spaces. |
| (tui_ui_out::tui_ui_out): Don't initialize fields here. |
| * tui/tui-out.h (tui_ui_out) Add intro comments. |
| <m_line, m_start_of_line>: In-class initialize, and add describing |
| comment. |
| |
| 2019-03-18 Alan Hayward <alan.hayward@arm.com> |
| |
| * arm-linux-nat.c (arm_linux_insert_hw_breakpoint1): Fix |
| variable names. |
| (arm_linux_remove_hw_breakpoint1): Use a gdb::function_view. |
| |
| 2019-03-18 Pedro Alves <palves@redhat.com> |
| Eli Zaretskii <eliz@gnu.org> |
| |
| * tui/tui-out.c (tui_ui_out::tui_ui_out): Fix initialization of |
| m_line and m_start_of_line. |
| |
| 2019-03-18 Eli Zaretskii <eliz@gnu.org> |
| |
| * tui/tui-io.c (gdb_wgetch): Don't echo CR. |
| (tui_getc): When gdb_wgetch returns a CR, behave the same as when |
| it returns a newline. This fixes a regression in TU mode, whereby |
| the next line is output on the same screen line as the user input. |
| |
| 2019-03-18 Tom Tromey <tromey@adacore.com> |
| |
| * minsyms.c (minimal_symbol_reader::install): Remove call to |
| obstack_blank. |
| |
| 2019-03-18 Pedro Alves <palves@redhat.com> |
| |
| * tui/tui-io.c (reverse_mode_p, reverse_save_bg, reverse_save_fg): |
| New globals. |
| (apply_style): New, factored out from ... |
| (apply_ansi_escape): ... this. Handle reverse video mode. |
| (tui_set_reverse_mode): New function. |
| * tui/tui-io.h (tui_set_reverse_mode): New declaration. |
| * tui/tui-winsource.c (tui_show_source_line): Use |
| tui_set_reverse_mode instead of setting A_STANDOUT. |
| * ui-style.h (struct ui_file_style) <set_reverse, set_fg, set_bg>: |
| New setter methods. |
| |
| 2019-03-18 Hannes Domani <ssbssa@yahoo.de> |
| |
| * tui/tui-source.c (copy_source_line): Fix handling of 'column'. |
| Handle tabs. |
| |
| 2019-03-18 Tom Tromey <tromey@adacore.com> |
| |
| * ada-lang.c (empty_array): Add "high" parameter. |
| (ada_evaluate_subexp): Update. |
| |
| 2019-03-17 Sergei Trofimovich <siarheit@google.com> |
| |
| * unittests/string_view-selftests.c: Define |
| _initialize_string_view_selftests unconditionally. |
| |
| 2019-03-17 Vladimir Martyanov <vilgeforce@gmail.com> |
| |
| PR gdb/24350 |
| * windows-nat.c (windows_make_so): Remove unused text_vma variable. |
| |
| 2019-03-17 Vladimir Martyanov <vilgeforce@gmail.com> |
| |
| PR gdb/24351 |
| * windows-nat.c (display_selector): Fix format specifiers. |
| |
| 2019-03-17 Eli Zaretskii <eliz@gnu.org> |
| |
| * tui/tui-winsource.c (tui_set_is_exec_point_at): Call |
| tui_refill_source_window instead of tui_refresh_win, to update the |
| current execution line. This fixes redisplay of the current line |
| when stepping through the code with "next" or "step". |
| |
| 2019-03-16 Eli Zaretskii <eliz@gnu.org> |
| |
| * source-cache.c (source_cache::get_source_lines): Call |
| find_source_lines to initialize s->nlines. This fixes vertical |
| scrolling of TUI source window when the DOWN arrow is pressed. |
| |
| 2019-03-16 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * auto-load.c (_initialize_auto_load): Fix 'This options has'. |
| linux-thread-db.c (_initialize_thread_db): Likewise. |
| |
| 2019-03-16 Eli Zaretskii <eliz@gnu.org> |
| |
| * tui/tui-winsource.c (tui_show_source_line): Revert "Use |
| wclrtoeol in tui_show_source_line". This reverts changes made in |
| commit 4a3045920bbe4e50a0f4920b0fdc4e88ef23015c. |
| |
| 2019-03-15 Tom Tromey <tom@tromey.com> |
| |
| * symtab.h (struct minimal_symbol): Derive from |
| general_symbol_info. |
| (MSYMBOL_VALUE, MSYMBOL_VALUE_RAW_ADDRESS) |
| (MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES) |
| (MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE) |
| (MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME) |
| (MSYMBOL_LINKAGE_NAME, MSYMBOL_DEMANGLED_NAME) |
| (MSYMBOL_SEARCH_NAME): Update. |
| (MSYMBOL_SET_LANGUAGE, MSYMBOL_SET_NAMES): Remove. |
| * solib.c (gdb_bfd_lookup_symbol_from_symtab): Don't use memset. |
| * minsyms.c (minimal_symbol_reader::record_full): Update. |
| |
| 2019-03-15 Tom Tromey <tom@tromey.com> |
| |
| * minsyms.c (minimal_symbol_reader::install): Use memcpy. |
| |
| 2019-03-15 Tom Tromey <tom@tromey.com> |
| |
| * objfiles.h (struct objfile_per_bfd_storage) <msymbols>: Now a |
| unique_xmalloc_ptr. |
| (objfile::msymbols_range::begin, objfile::msymbols_range::end): |
| Update. |
| * minsyms.c (lookup_minimal_symbol_by_pc_section) |
| (build_minimal_symbol_hash_tables) |
| (minimal_symbol_reader::install): Update. |
| |
| 2019-03-15 Tom Tromey <tom@tromey.com> |
| |
| * symtab.c (create_demangled_names_hash): Update. |
| (symbol_set_names): Update. |
| * objfiles.h (struct objfile_per_bfd_storage) |
| <demangled_names_hash>: Now an htab_up. |
| * objfiles.c (objfile_per_bfd_storage): Simplify. |
| |
| 2019-03-15 Tom Tromey <tom@tromey.com> |
| |
| * objfiles.h (struct objfile_per_bfd_storage): Declare |
| destructor. |
| * objfiles.c (objfile_per_bfd_storage::~objfile_per_bfd_storage): |
| New. |
| (get_objfile_bfd_data): Use new. Don't initialize |
| language_of_main. |
| (free_objfile_per_bfd_storage): Remove. |
| (objfile_bfd_data_free, objfile::~objfile): Use delete. |
| |
| 2019-03-15 Tom Tromey <tom@tromey.com> |
| |
| * symfile.c (reread_symbols): Update. |
| * objfiles.c (objfile::objfile): Update. |
| * minsyms.h (terminate_minimal_symbol_table): Don't declare. |
| * minsyms.c (lookup_minimal_symbol_by_pc_section): Update |
| comment. |
| (minimal_symbol_reader::install): Update. |
| (terminate_minimal_symbol_table): Remove. |
| * jit.c (jit_object_close_impl): Update. |
| |
| 2019-03-15 Tom Tromey <tom@tromey.com> |
| |
| * minsyms.c (minimal_symbol_reader::record_full): Remove some |
| initializations. |
| |
| 2019-03-15 Tom Tromey <tom@tromey.com> |
| |
| * objfiles.h (struct objfile_per_bfd_storage) |
| <demangled_hash_languages>: Now a bitset. |
| * minsyms.c (add_minsym_to_demangled_hash_table): Update. |
| (lookup_minimal_symbol): Update. |
| |
| 2019-03-15 Tom Tromey <tom@tromey.com> |
| |
| * minsyms.h (class minimal_symbol_reader) <record_with_info>: |
| Don't return the symbol. |
| * coffread.c (record_minimal_symbol): Use record_full. |
| |
| 2019-03-14 Eli Zaretskii <eliz@gnu.org> |
| |
| The MS-Windows port of ncurses fails to switch to a color pair if |
| one or both of the colors are the implicit default colors. This |
| change records the default colors when TUI is initialized, and |
| then specifies them explicitly when a color pair uses the default |
| colors. This allows color styling in TUI mode on MS-Windows. |
| |
| * tui/tui-io.c [__MINGW32__]: Include windows.h. Declare |
| ncurses_norm_attr. |
| (tui_initialize_io) [__MINGW32__]: Record the default terminal |
| colors in ncurses_norm_attr. |
| (apply_ansi_escape) [__MINGW32__]: If a color in a color pair is |
| "none", replace it with the default color recorded in |
| ncurses_norm_attr. |
| |
| 2019-03-14 Tom Tromey <tromey@adacore.com> |
| |
| * source-cache.h (class source_cache) <get_source_lines>: Return |
| std::string. |
| * source-cache.c (source_cache::extract_lines): Handle case where |
| first_pos==npos. Return std::string. |
| (source_cache::get_source_lines): Update. |
| |
| 2019-03-14 Tom Tromey <tromey@adacore.com> |
| |
| * NEWS: Add item for "style sources" commands. |
| * source-cache.c (source_cache::get_source_lines): Check |
| source_styling. |
| * cli/cli-style.c (source_styling): New global. |
| (_initialize_cli_style): Add "style sources" commands. |
| (show_style_sources): New function. |
| * cli/cli-style.h (source_styling): Declare. |
| |
| 2019-03-14 Pedro Alves <palves@redhat.com> |
| Tom Tromey <tromey@adacore.com> |
| |
| * tui/tui-winsource.h (tui_refill_source_window): Declare. |
| * tui/tui-winsource.c (tui_refill_source_window): New function, |
| from... |
| (tui_horizontal_source_scroll): ... here. Move some logic. |
| * cli/cli-style.c (set_style_enabled): Notify new observable. |
| * tui/tui-hooks.c (tui_redisplay_source): New function. |
| (tui_attach_detach_observers): Attach or detach |
| tui_redisplay_source. |
| * observable.h (source_styling_changed): New observable. |
| * observable.c: Define source_styling_changed observable. |
| |
| 2019-03-13 Tom Tromey <tromey@adacore.com> |
| |
| * i386-gnu-nat.c (i386_gnu_nat_target::fetch_registers) |
| (i386_gnu_nat_target::store_registers): Update. |
| * target-debug.h (target_debug_print_std_string): New macro. |
| * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. |
| * windows-tdep.c (display_one_tib): Update. |
| * tui/tui-stack.c (tui_make_status_line): Update. |
| * top.c (print_inferior_quit_action): Update. |
| * thread.c (thr_try_catch_cmd): Update. |
| (add_thread_with_info): Update. |
| (thread_target_id_str): Update. |
| (thr_try_catch_cmd): Update. |
| (thread_command): Update. |
| (thread_find_command): Update. |
| * record-btrace.c (record_btrace_target::info_record) |
| (record_btrace_resume_thread, record_btrace_target::resume) |
| (record_btrace_cancel_resume, record_btrace_step_thread) |
| (record_btrace_target::wait, record_btrace_target::wait) |
| (record_btrace_target::wait, record_btrace_target::stop): Update. |
| * progspace.c (print_program_space): Update. |
| * process-stratum-target.c |
| (process_stratum_target::thread_address_space): Update. |
| * linux-fork.c (linux_fork_mourn_inferior) |
| (detach_checkpoint_command, info_checkpoints_command) |
| (linux_fork_context): Update. |
| (linux_fork_detach): Update. |
| (class scoped_switch_fork_info): Update. |
| (delete_checkpoint_command): Update. |
| * infrun.c (follow_fork_inferior): Update. |
| (follow_fork_inferior): Update. |
| (proceed_after_vfork_done): Update. |
| (handle_vfork_child_exec_or_exit): Update. |
| (follow_exec): Update. |
| (displaced_step_prepare_throw): Update. |
| (displaced_step_restore): Update. |
| (start_step_over): Update. |
| (resume_1): Update. |
| (clear_proceed_status_thread): Update. |
| (proceed): Update. |
| (print_target_wait_results): Update. |
| (do_target_wait): Update. |
| (context_switch): Update. |
| (stop_all_threads): Update. |
| (restart_threads): Update. |
| (finish_step_over): Update. |
| (handle_signal_stop): Update. |
| (switch_back_to_stepped_thread): Update. |
| (keep_going_pass_signal): Update. |
| (print_exited_reason): Update. |
| (normal_stop): Update. |
| * inferior.c (inferior_pid_to_str): Change return type. |
| (print_selected_inferior): Update. |
| (add_inferior): Update. |
| (detach_inferior): Update. |
| * dummy-frame.c (fprint_dummy_frames): Update. |
| * dcache.c (dcache_info_1): Update. |
| * btrace.c (btrace_enable, btrace_disable, btrace_teardown) |
| (btrace_fetch, btrace_clear): Update. |
| * linux-tdep.c (linux_core_pid_to_str): Change return type. |
| * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Change return |
| type. |
| * fbsd-tdep.c (fbsd_core_pid_to_str): Change return type. |
| * sol2-tdep.h (sol2_core_pid_to_str): Change return type. |
| * sol2-tdep.c (sol2_core_pid_to_str): Change return type. |
| * gdbarch.c, gdbarch.h: Rebuild. |
| * gdbarch.sh (core_pid_to_str): Change return type. |
| * windows-nat.c (struct windows_nat_target) <pid_to_str>: Change |
| return type. |
| (windows_nat_target::pid_to_str): Change return type. |
| (windows_delete_thread): Update. |
| (windows_nat_target::attach): Update. |
| (windows_nat_target::files_info): Update. |
| * target-delegates.c: Rebuild. |
| * sol-thread.c (class sol_thread_target) <pid_to_str>: Change |
| return type. |
| (sol_thread_target::pid_to_str): Change return type. |
| * remote.c (class remote_target) <pid_to_str>: Change return |
| type. |
| (remote_target::pid_to_str): Change return type. |
| (extended_remote_target::attach, remote_target::remote_stop_ns) |
| (remote_target::remote_notif_remove_queued_reply) |
| (remote_target::push_stop_reply, remote_target::disable_btrace): |
| Update. |
| (extended_remote_target::attach): Update. |
| * remote-sim.c (struct gdbsim_target) <pid_to_str>: Change return |
| type. |
| (gdbsim_target::pid_to_str): Change return type. |
| * ravenscar-thread.c (struct ravenscar_thread_target) |
| <pid_to_str>: Change return type. |
| (ravenscar_thread_target::pid_to_str): Change return type. |
| * procfs.c (class procfs_target) <pid_to_str>: Change return |
| type. |
| (procfs_target::pid_to_str): Change return type. |
| (procfs_target::attach): Update. |
| (procfs_target::detach): Update. |
| (procfs_target::fetch_registers): Update. |
| (procfs_target::store_registers): Update. |
| (procfs_target::wait): Update. |
| (procfs_target::files_info): Update. |
| * obsd-nat.c (obsd_nat_target::pid_to_str): Change return type. |
| * nto-procfs.c (struct nto_procfs_target) <pid_to_str>: Change |
| return type. |
| (nto_procfs_target::pid_to_str): Change return type. |
| (nto_procfs_target::files_info, nto_procfs_target::attach): Update. |
| * linux-thread-db.c (class thread_db_target) <pid_to_str>: Change |
| return type. |
| * linux-nat.c (linux_nat_target::pid_to_str): Change return type. |
| (exit_lwp): Update. |
| (attach_proc_task_lwp_callback, get_detach_signal) |
| (detach_one_lwp, resume_lwp, linux_nat_target::resume) |
| (linux_nat_target::resume, wait_lwp, stop_callback) |
| (maybe_clear_ignore_sigint, stop_wait_callback, status_callback) |
| (save_stop_reason, select_event_lwp, linux_nat_filter_event) |
| (linux_nat_wait_1, resume_stopped_resumed_lwps) |
| (linux_nat_target::wait, linux_nat_stop_lwp): Update. |
| * inf-ptrace.c (inf_ptrace_target::pid_to_str): Change return |
| type. |
| (inf_ptrace_target::attach): Update. |
| (inf_ptrace_target::files_info): Update. |
| * go32-nat.c (struct go32_nat_target) <pid_to_str>: Change return |
| type. |
| (go32_nat_target::pid_to_str): Change return type. |
| * gnu-nat.c (gnu_nat_target::pid_to_str): Change return type. |
| (gnu_nat_target::wait): Update. |
| (gnu_nat_target::wait): Update. |
| (gnu_nat_target::resume): Update. |
| * fbsd-nat.c (fbsd_nat_target::pid_to_str): Change return type. |
| (fbsd_nat_target::wait): Update. |
| * darwin-nat.c (darwin_nat_target::pid_to_str): Change return |
| type. |
| (darwin_nat_target::attach): Update. |
| * corelow.c (class core_target) <pid_to_str>: Change return type. |
| (core_target::pid_to_str): Change return type. |
| * target.c (normal_pid_to_str): Change return type. |
| (default_pid_to_str): Likewise. |
| (target_pid_to_str): Change return type. |
| (target_translate_tls_address): Update. |
| (target_announce_detach): Update. |
| * bsd-uthread.c (struct bsd_uthread_target) <pid_to_str>: Change |
| return type. |
| (bsd_uthread_target::pid_to_str): Change return type. |
| * bsd-kvm.c (class bsd_kvm_target) <pid_to_str>: Change return |
| type. |
| (bsd_kvm_target::pid_to_str): Change return type. |
| * aix-thread.c (class aix_thread_target) <pid_to_str>: Change |
| return type. |
| (aix_thread_target::pid_to_str): Change return type. |
| * target.h (struct target_ops) <pid_to_str>: Change return type. |
| (target_pid_to_str, normal_pid_to_str): Likewise. |
| * obsd-nat.h (class obsd_nat_target) <pid_to_str>: Change return |
| type. |
| * linux-nat.h (class linux_nat_target) <pid_to_str>: Change return |
| type. |
| * inf-ptrace.h (struct inf_ptrace_target) <pid_to_str>: Change |
| return type. |
| * gnu-nat.h (struct gnu_nat_target) <pid_to_str>: Change return |
| type. |
| * fbsd-nat.h (class fbsd_nat_target) <pid_to_str>: Change return |
| type. |
| * darwin-nat.h (class darwin_nat_target) <pid_to_str>: Change |
| return type. |
| |
| 2019-03-13 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * NEWS: Mention that the new default MI version is 3. Mention |
| changes to the output of commands and events that deal with |
| multi-location breakpoints. |
| * breakpoint.c: Include "mi/mi-out.h". |
| (print_one_breakpoint): Change output syntax if using MI version |
| >= 3. |
| * mi/mi-main.h (mi_cmd_fix_multi_location_breakpoint_output): |
| New. |
| (mi_multi_location_breakpoint_output_fixed): New. |
| * mi/mi-main.c (fix_multi_location_breakpoint_output): New. |
| (mi_cmd_fix_multi_location_breakpoint_output): New. |
| (mi_multi_location_breakpoint_output_fixed): New. |
| * mi/mi-cmds.c (mi_cmds): Register command |
| -fix-multi-location-breakpoint-output. |
| * mi/mi-out.c (mi_out_new): Instantiate version 3 when using |
| interpreter "mi". |
| |
| 2019-03-13 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * mi/mi-out.h (mi_out_new): Change parameter to const char *. |
| * mi/mi-out.c (mi_out_new): Change parameter to const char *, |
| instantiate mi_ui_out based on interpreter name. |
| * mi/mi-interp.c (mi_interp::init): Use the new mi_out_new. |
| * mi/mi-main.c (mi_load_progress): Likewise. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * NEWS: Combine separate "New targets" sections for 8.3. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * ppc-fbsd-tdep.c (ppcfbsd_get_thread_local_address): New. |
| (ppcfbsd_init_abi): Install gdbarch |
| "fetch_tls_load_module_address" and "get_thread_local_address" |
| methods. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * riscv-fbsd-tdep.c (riscv_fbsd_get_thread_local_address): New. |
| (riscv_fbsd_init_abi): Install gdbarch |
| "fetch_tls_load_module_address" and "get_thread_local_address" |
| methods. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * i386-fbsd-tdep.c (i386fbsd_get_thread_local_address): New. |
| (i386fbsd_init_abi): Install gdbarch |
| "fetch_tls_load_module_address" and "get_thread_local_address" |
| methods. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * amd64-fbsd-tdep.c (amd64fbsd_get_thread_local_address): New. |
| (amd64fbsd_init_abi): Install gdbarch |
| "fetch_tls_load_module_address" and "get_thread_local_address" |
| methods. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd-tdep.c (fbsd_pspace_data_handle): New variable. |
| (struct fbsd_pspace_data): New type. |
| (get_fbsd_pspace_data, fbsd_pspace_data_cleanup) |
| (fbsd_read_integer_by_name, fbsd_fetch_rtld_offsets) |
| (fbsd_get_tls_index, fbsd_get_thread_local_address): New function. |
| (_initialize_fbsd_tdep): Initialize 'fbsd_pspace_data_handle'. |
| * fbsd-tdep.c (fbsd_get_thread_local_address): New prototype. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * gdbtypes.c (lookup_struct_elt): New function. |
| (lookup_struct_elt_type): Reimplement via lookup_struct_elt. |
| * gdbtypes.h (struct struct_elt): New type. |
| (lookup_struct_elt): New prototype. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * gdbtypes.c (lookup_struct_elt_type): Update comment and |
| remove disabled code block. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * gdbarch.sh (get_thread_local_address): New method. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| * target.c (target_translate_tls_address): Use |
| gdbarch_get_thread_local_address if present instead of |
| target::get_thread_local_address. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * target.h (target::get_thread_local_address): Update comment. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * solib-svr4.c (svr4_fetch_objfile_link_map): Look for |
| objfile->separate_debug_objfile_backlink if not NULL. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Use |
| tdep->fsbase_regnum instead of constants for fs_base and gs_base. |
| (amd64bsd_store_inferior_registers): Likewise. |
| * amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description): |
| Enable segment base registers. |
| * i386-bsd-nat.c (i386bsd_fetch_inferior_registers): Use |
| PT_GETFSBASE and PT_GETGSBASE. |
| (i386bsd_store_inferior_registers): Use PT_SETFSBASE and |
| PT_SETGSBASE. |
| * i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Enable |
| segment base registers. |
| * i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise. |
| |
| 2019-03-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description): |
| Update calls to i386_target_description to add 'segments' |
| parameter. |
| * amd64-tdep.c (amd64_init_abi): Set tdep->fsbase_regnum. Don't |
| add segment base registers. |
| * arch/i386.c (i386_create_target_description): Add 'segments' |
| parameter to enable segment base registers. |
| * arch/i386.h (i386_create_target_description): Likewise. |
| * features/i386/32bit-segments.xml: New file. |
| * features/i386/32bit-segments.c: Generate. |
| * i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Update |
| call to i386_target_description to add 'segments' parameter. |
| * i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise. |
| * i386-go32-tdep.c (i386_go32_init_abi): Likewise. |
| * i386-linux-tdep.c (i386_linux_read_description): Likewise. |
| * i386-tdep.c (i386_validate_tdesc_p): Add segment base registers |
| if feature is present. |
| (i386_gdbarch_init): Pass I386_NUM_REGS to set_gdbarch_num_regs. |
| Add 'segments' parameter to call to i386_target_description. |
| (i386_target_description): Add 'segments' parameter to enable |
| segment base registers. |
| (_initialize_i386_tdep) [GDB_SELF_TEST]: Add 'segments' parameter |
| to call to i386_target_description. |
| * i386-tdep.h (struct gdbarch_tdep): Add 'fsbase_regnum'. |
| (enum i386_regnum): Add I386_FSBASE_REGNUM and I386_GSBASE_REGNUM. |
| Define I386_NUM_REGS. |
| (i386_target_description): Add 'segments' parameter to enable |
| segment base registers. |
| |
| 2019-03-12 Eli Zaretskii <eliz@gnu.org> |
| |
| PR/24325 |
| * source-cache.c: #undef open and close, to avoid unresolved |
| externals during linking. |
| |
| 2019-03-12 Tom Tromey <tromey@adacore.com> |
| |
| * remote.c (magic_null_ptid, not_sent_ptid, any_thread_ptid): Now |
| const. Add initializers. |
| (_initialize_remote): Don't initialize ptid globals. |
| |
| 2019-03-12 Pedro Alves <palves@redhat.com> |
| |
| * yy-remap.h [TEST_CPNAMES] (YYFPRINTF): Don't define. |
| |
| 2019-03-12 Pedro Alves <palves@redhat.com> |
| |
| * cp-name-parser.y (main): Remove unused 'len' variable. |
| |
| 2019-03-12 Tom Tromey <tromey@adacore.com> |
| |
| * common/ptid.c (null_ptid, minus_one_ptid): Now const. |
| * common/ptid.h (null_ptid, minus_one_ptid): Now const. |
| |
| 2019-03-12 Tom Tromey <tromey@adacore.com> |
| |
| * linux-nat.c (iterate_over_lwps): Update. |
| (stop_callback): Remove parameter. |
| (stop_wait_callback, detach_callback, resume_set_callback) |
| (select_singlestep_lwp_callback, set_ignore_sigint) |
| (status_callback, resumed_callback, resume_clear_callback) |
| (kill_callback, kill_wait_callback, linux_nat_stop_lwp): Remove |
| data parameter. |
| (linux_nat_target::detach, linux_nat_target::resume) |
| (linux_stop_and_wait_all_lwps, select_event_lwp) |
| (linux_nat_filter_event, linux_nat_wait_1) |
| (linux_nat_target::kill, linux_nat_target::stop) |
| (linux_nat_target::stop): Update. |
| (linux_nat_resume_callback): Change type. |
| (resume_stopped_resumed_lwps, count_events_callback) |
| (select_event_lwp_callback): Likewise. |
| (linux_stop_lwp, linux_nat_stop_lwp): Update. |
| * arm-linux-nat.c (struct update_registers_data): Remove. |
| (update_registers_callback): Change type. |
| (arm_linux_insert_hw_breakpoint1): Update. |
| * nat/x86-linux-dregs.c (update_debug_registers_callback): Remove |
| parameter. |
| (x86_linux_dr_set_addr): Update. |
| (x86_linux_dr_set_control): Update. |
| * nat/linux-nat.h (iterate_over_lwps_ftype): Remove parameter. |
| (iterate_over_lwps): Use gdb::function_view. |
| * nat/aarch64-linux-hw-point.c (struct |
| aarch64_dr_update_callback_param): Remove. |
| (debug_reg_change_callback): Change type. |
| (aarch64_notify_debug_reg_change): Update. |
| * s390-linux-nat.c (s390_refresh_per_info): Update. |
| |
| 2019-03-11 Tom Tromey <tromey@adacore.com> |
| |
| * dwarf2read.c (dwarf2_find_containing_comp_unit): Remove |
| redundant assignment to "this_cu". |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type): Remove unnecessary cases from switch. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_set): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_struct): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_complex): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_float): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_bool): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_range): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_char): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_enum): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_int): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_func): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_array): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-03-08 Simon Marchi <simon.marchi@efficios.com> |
| |
| * gdbtypes.c (rank_one_type_parm_ptr): New function extracted |
| from... |
| (rank_one_type): ... this. |
| |
| 2019-02-27 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * inferior.c (initialize_inferiors): Ensure 'help set/show print |
| inferior-events' shows the example events. |
| |
| 2019-03-08 Eli Zaretskii <eliz@gnu.org> |
| |
| Support styling on native MS-Windows console |
| |
| PR/24315 |
| * utils.c (can_emit_style_escape) [_WIN32]: Don't disable styling |
| on MS-Windows if $TERM is not defined. |
| |
| * cli/cli-style.c: Set cli_styling to 1 in the MinGW build. |
| |
| * posix-hdep.c (gdb_console_fputs): |
| * mingw-hdep.c (rgb_to_16colors, gdb_console_fputs): New |
| functions. |
| * ui-file.h (gdb_console_fputs): Add prototype. |
| |
| * ui-file.c (stdio_file::puts): Call gdb_console_fputs, and fall |
| back to fputs only if the former returns zero. |
| |
| 2019-03-07 Tom Tromey <tom@tromey.com> |
| |
| * symmisc.c (print_symbol_bcache_statistics): Update. |
| (print_objfile_statistics): Update. |
| * symfile.c (allocate_symtab): Update. |
| * stabsread.c: Don't include bcache.h. |
| * psymtab.h (struct psymbol_bcache): Don't declare. |
| (class psymtab_storage) <psymbol_cache>: Now a bcache. |
| (psymbol_bcache_init, psymbol_bcache_free) |
| (psymbol_bcache_get_bcache): Don't declare. |
| * psymtab.c (struct psymbol_bcache): Remove. |
| (psymtab_storage::psymtab_storage): Update. |
| (psymtab_storage::~psymtab_storage): Update. |
| (psymbol_bcache_init, psymbol_bcache_free) |
| (psymbol_bcache_get_bcache, psymbol_bcache_full): Remove. |
| (add_psymbol_to_bcache): Update. |
| (allocate_psymtab): Update. |
| * objfiles.h (struct objfile_per_bfd_storage) <filename_cache, |
| macro_cache>: No longer pointers. |
| * objfiles.c (get_objfile_bfd_data): Don't call bcache_xmalloc. |
| (free_objfile_per_bfd_storage): Don't call bcache_xfree. |
| * macrotab.c (macro_bcache): Update. |
| * macroexp.c: Don't include bcache.h. |
| * gdbtypes.c (check_types_worklist): Update. |
| (types_deeply_equal): Remove TRY/CATCH. Update. |
| * elfread.c (elf_symtab_read): Update. |
| * dwarf2read.c: Don't include bcache.h. |
| * buildsym.c (buildsym_compunit::get_macro_table): Update. |
| * bcache.h (bcache, bcache_full, bcache_xffree, bcache_xmalloc) |
| (print_bcache_statistics, bcache_memory_used): Don't declare. |
| (struct bcache): Move from bcache.c. Add constructor, destructor, |
| methods. Rename all data members. |
| * bcache.c (struct bcache): Move to bcache.h. |
| (bcache::expand_hash_table): Rename from expand_hash_table. |
| (bcache): Remove. |
| (bcache::insert): Rename from bcache_full. |
| (bcache::compare): Rename from bcache_compare. |
| (bcache_xmalloc): Remove. |
| (bcache::~bcache): Rename from bcache_xfree. |
| (bcache::print_statistics): Rename from print_bcache_statistics. |
| (bcache::memory_used): Rename from bcache_memory_used. |
| |
| 2019-03-07 Pedro Alves <palves@redhat.com> |
| |
| * infrun.c (normal_stop): Also check for |
| TARGET_WAITKIND_NO_RESUMED before referring to inferior_thread(). |
| |
| 2019-03-07 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * f-lang.c (value_from_host_double): Moved to... |
| * value.c (value_from_host_double): ...here. |
| * value.h (value_from_host_double): Declare. |
| * guile/scm-math.c (vlscm_convert_typed_number): Use |
| value_from_host_double. |
| (vlscm_convert_number): Likewise. |
| * guile/scm-value.c (gdbscm_value_to_real): Likewise. |
| * python/py-value.c (convert_value_from_python): Likewise. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * gcore.c (write_gcore_file): Use SCOPE_EXIT. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * utils.h (free_current_contents): Don't declare. |
| * utils.c (free_current_contents): Remove. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * top.c (quit_force): Update. |
| * main.c (captured_command_loop): Update. |
| * common/new-op.c (operator new): Update. |
| * common/common-exceptions.c (struct catcher) |
| <save_cleanup_chain>: Remove member. |
| (exceptions_state_mc_init): Update. |
| (exception_try_scope_entry): Return nullptr. |
| (exception_try_scope_exit, exception_rethrow) |
| (throw_exception_sjlj, throw_exception_cxx): Update. |
| * common/cleanups.h (make_cleanup, make_cleanup_dtor) |
| (all_cleanups, do_cleanups, discard_cleanups) |
| (discard_final_cleanups, save_cleanups, save_final_cleanups) |
| (restore_cleanups, restore_final_cleanups): Don't declare. |
| (do_final_cleanups): Remove parameter. |
| * common/cleanups.c (cleanup_chain, make_cleanup) |
| (make_cleanup_dtor, all_cleanups, do_cleanups) |
| (discard_my_cleanups, discard_cleanups) |
| (discard_final_cleanups, save_my_cleanups, save_cleanups) |
| (save_final_cleanups, restore_my_cleanups, restore_cleanups) |
| (null_cleanup): Remove. |
| (do_final_cleanups): Remove parameter. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * remote.c (remote_target::remote_parse_stop_reply): Use |
| unique_xmalloc_ptr. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * stabsread.c (struct stabs_field_info): Rename from field_info. |
| <list, fnlist>: Add initializers. |
| <obstack>: New member. |
| (read_member_functions, read_struct_fields, read_baseclasses): |
| Allocate on obstack. Don't use cleanups. |
| (read_one_struct_field, read_member_functions, read_struct_fields) |
| (read_baseclasses, read_tilde_fields, attach_fn_fields_to_type) |
| (attach_fields_to_type, read_cpp_abbrev, read_member_functions) |
| (read_struct_type): Update. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * nat/linux-namespaces.c (linux_mntns_access_fs): Use SCOPE_EXIT. |
| * common/filestuff.h (make_cleanup_close): Don't declare. |
| * common/filestuff.c (do_close_cleanup, make_cleanup_close): |
| Remove. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * solib-aix.c: Use make_scope_exit. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * solib-svr4.c (svr4_parse_libraries, svr4_current_sos_direct): |
| Use make_scope_exit. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * solib-svr4.c (disable_probes_interface): Remove parameter. |
| (svr4_handle_solib_event): Use make_scope_exit. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * remote.c (struct stop_reply_deleter): Remove. |
| (stop_reply_up): Update. |
| (struct stop_reply): Derive from notif_event. Don't typedef. |
| <regcache>: Now a std::vector. |
| (stop_reply_xfree): Remove. |
| (stop_reply::~stop_reply): Rename from stop_reply_dtr. |
| (remote_notif_stop_alloc_reply): Return a unique_ptr. Use new. |
| (remote_target::discard_pending_stop_replies): Use delete. |
| (remote_target::remote_parse_stop_reply): Update. |
| (remote_target::process_stop_reply): Update. |
| * remote-notif.h (struct notif_event): Add virtual destructor. |
| Remove "dtr" member. |
| (struct notif_client) <alloc_event>: Return a unique_ptr. |
| (notif_event_xfree): Don't declare. |
| (notif_event_up): New typedef. |
| * remote-notif.c (remote_notif_ack, remote_notif_parse): Update. |
| (notif_event_xfree, do_notif_event_xfree): Remove. |
| (remote_notif_state_xfree): Update. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * infrun.c (displaced_step_clear_cleanup): Now a |
| forward_scope_exit type. |
| (displaced_step_prepare_throw): Update. |
| (displaced_step_fixup): Update. |
| |
| 2019-03-06 Tom Tromey <tom@tromey.com> |
| |
| * inferior.h (class inferior): Update comment. |
| * gdbthread.h (class thread_info): Update comment. |
| |
| 2019-03-06 Joel Brobecker <brobecker@adacore.com> |
| Tom Tromey <tom@tromey.com> |
| |
| * stabsread.h (struct stab_section_list): Remove. |
| (coffstab_build_psymtabs): Update. |
| * dbxread.c (symbuf_sections): Now a std::vector. |
| (sect_idx): New global. |
| (fill_symbuf): Update. |
| (coffstab_build_psymtabs): Change type of stabsects parameter. |
| Update. |
| * coffread.c (struct coff_symfile_info) <stabsects>: Now a |
| std::vector. |
| (linetab, linetab_offset, linetab_size, stringtab): Move earlier. |
| (coff_locate_sections): Update. |
| (coff_symfile_read): Remove cleanups. Update. |
| (init_stringtab): Add storage parameter. |
| (free_stringtab, free_stringtab_cleanup): Remove. |
| (init_lineno): Add storage parameter. |
| (free_linetab, free_linetab_cleanup): Remove. |
| |
| 2019-03-06 Pedro Alves <palves@redhat.com> |
| |
| * linux-fork.c (fork_info::clobber_regs): Delete. |
| (fork_load_infrun_state): Remove reference to 'clobber_regs'. |
| (fork_save_infrun_state): Remove 'clobber_regs' parameter. Update |
| comment. Adjust. |
| (scoped_switch_fork_info::scoped_switch_fork_info) |
| (checkpoint_command, linux_fork_context): Adjust |
| fork_save_infrun_state calls. |
| |
| 2019-03-06 Pedro Alves <palves@redhat.com> |
| |
| * linux-fork.c (inf_has_multiple_thread_cb): Delete. |
| (inf_has_multiple_threads): Return 'bool' and rewrite using |
| inferior_info::threads(). |
| |
| 2019-03-06 Pedro Alves <palves@redhat.com> |
| |
| * linux-fork.c: Include <list>. |
| (fork_list): Now a std::list instance. |
| (fork_info): Add ctor, dtor, and in-class initialize all fields. |
| (forks_exist_p, find_last_fork): Adjust. |
| (new_fork): Delete. |
| (one_fork_p): New. |
| (add_fork): Adjust. |
| (free_fork): Delete, folded into fork_info::~fork_info(). |
| (delete_fork, find_fork_ptid, find_fork_id, find_fork_pid): |
| Adjust. |
| (init_fork_list): Delete. |
| (linux_fork_killall, linux_fork_mourn_inferior) |
| (linux_fork_detach, info_checkpoints_command): Adjust. |
| (_initialize_linux_fork): No longer call init_fork_list. |
| |
| 2019-03-06 Pedro Alves <palves@redhat.com> |
| |
| * linux-fork.c (new_fork): New, split out of ... |
| (add_fork): ... this. Return void. Move "first fork" special |
| case from here, to ... |
| (checkpoint_command): ... here. |
| * linux-linux.h (add_fork): Return void. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * f-exp.y (direct_abs_decl): Handle TYPE*SIZE type names. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| Chris January <chris.january@arm.com> |
| David Lecomber <david.lecomber@arm.com> |
| |
| * f-exp.y: New token, UNOP_INTRINSIC. |
| (exp): New pattern using UNOP_INTRINSIC token. |
| (f77_keywords): Add 'abs' keyword. |
| * f-lang.c: Add 'target-float.h' and 'math.h' includes. |
| (value_from_host_double): New function. |
| (evaluate_subexp_f): Support UNOP_ABS. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * f-lang.c (build_fortran_types): Use TYPE_CODE_CHAR for character |
| types. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * f-exp.y (convert_to_kind_type): Handle integer (kind=8). |
| * f-lang.c (build_fortran_types): Setup builtin_integer_s8. |
| * f-lang.h (struct builtin_f_type): Add builtin_integer_s8 field. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * f-exp.y (convert_to_kind_type): Handle more type kinds. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| Chris January <chris.january@arm.com> |
| |
| * expprint.c (dump_subexp_body_standard): Support UNOP_KIND. |
| * f-exp.y: Define 'KIND' token. |
| (exp): New pattern for KIND expressions. |
| (ptype): Handle types with a kind extension. |
| (direct_abs_decl): Extend to spot kind extensions. |
| (f77_keywords): Add 'kind' to the list. |
| (push_kind_type): New function. |
| (convert_to_kind_type): New function. |
| * f-lang.c (evaluate_subexp_f): Support UNOP_KIND. |
| * parse.c (operator_length_standard): Likewise. |
| * parser-defs.h (enum type_pieces): Add tp_kind. |
| * std-operator.def: Add UNOP_KIND. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * f-exp.y (f_parse): Set yydebug. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * f-lang.c (evaluate_subexp_f): New function. |
| (exp_descriptor_f): New global. |
| (f_language_defn): Use exp_descriptor_f instead of |
| exp_descriptor_standard. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * f-exp.y (struct token): Add comments. |
| (dot_ops): Remove uppercase versions and the end marker. |
| (f77_keywords): Likewise. |
| (yylex): Use ARRAY_SIZE to iterate over dot_ops, assert all |
| entries in the dot_ops array are case insensitive, and use |
| strncasecmp to compare strings. Also some whitespace cleanup in |
| this area. Similar for the f77_keywords array, except entries in |
| this list might be case sensitive. |
| |
| 2019-03-06 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * f-exp.y (struct f77_boolean_val): Add comments. |
| (boolean_values): Remove uppercase versions, and end marker. |
| (yylex): Use ARRAY_SIZE for iterating over boolean_values array, |
| and use strncasecmp to achieve case insensitivity. Additionally, |
| perform whitespace cleanup around this code. |
| |
| 2019-03-06 Tom Tromey <tromey@adacore.com> |
| |
| * remote-sim.c (gdbsim_target_open): Use result of |
| gdb_argv::release. |
| |
| 2019-03-06 Richard Bunt <richard.bunt@arm.com> |
| Dirk Schubert <dirk.schubert@arm.com> |
| Chris January <chris.january@arm.com> |
| |
| * eval.c (evaluate_subexp_standard): Call Fortran argument |
| wrapping logic. |
| * f-lang.c (struct value): A value which can be passed into a |
| Fortran function call. |
| (fortran_argument_convert): Wrap Fortran arguments in a pointer |
| where appropriate. |
| (struct type): Value ready for a Fortran function call. |
| (fortran_preserve_arg_pointer): Undo check_typedef, the pointer |
| is needed. |
| * f-lang.h (fortran_argument_convert): Declaration. |
| (fortran_preserve_arg_pointer): Declaration. |
| * infcall.c (value_arg_coerce): Call Fortran argument logic. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * python/py-prettyprint.c (print_string_repr): Remove #if. |
| * python/py-utils.c (unicode_to_encoded_string): Remove #if. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * target.c (the_dummy_target): Move later. Change type to |
| "dummy_target". |
| (initialize_targets): Don't initialize the_dummy_target. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * gdb_bfd.c (gdb_bfd_fdopenr): Remove. |
| * gdb_bfd.h (gdb_bfd_fdopenr): Don't declare. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * windows-nat.c (windows_nat_target::attach) |
| (windows_nat_target::detach): Don't call gdb_flush. |
| * valprint.c (generic_val_print, val_print, val_print_string): |
| Don't call gdb_flush. |
| * utils.c (defaulted_query): Don't call gdb_flush. |
| * typeprint.c (print_type_scalar): Don't call gdb_flush. |
| * target.c (target_announce_detach): Don't call gdb_flush. |
| * sparc64-tdep.c (adi_print_versions): Don't call gdb_flush. |
| * remote.c (extended_remote_target::attach): Don't call |
| gdb_flush. |
| * procfs.c (procfs_target::detach): Don't call gdb_flush. |
| * printcmd.c (do_examine): Don't call gdb_flush. |
| (info_display_command): Don't call gdb_flush. |
| * p-valprint.c (pascal_val_print): Don't call gdb_flush. |
| * nto-procfs.c (nto_procfs_target::attach): Don't call gdb_flush. |
| * memattr.c (info_mem_command): Don't call gdb_flush. |
| * mdebugread.c (mdebug_build_psymtabs): Don't call gdb_flush. |
| * m2-valprint.c (m2_val_print): Don't call gdb_flush. |
| * infrun.c (follow_exec, handle_command): Don't call gdb_flush. |
| * inf-ptrace.c (inf_ptrace_target::attach): Don't call gdb_flush. |
| * hppa-tdep.c (unwind_command): Don't call gdb_flush. |
| * gnu-nat.c (gnu_nat_target::attach): Don't call gdb_flush. |
| (gnu_nat_target::detach): Don't call gdb_flush. |
| * f-valprint.c (f_val_print): Don't call gdb_flush. |
| * darwin-nat.c (darwin_nat_target::attach): Don't call gdb_flush. |
| * cli/cli-script.c (read_command_lines): Don't call gdb_flush. |
| * cli/cli-cmds.c (shell_escape, print_disassembly): Don't call |
| gdb_flush. |
| * c-valprint.c (c_val_print): Don't call gdb_flush. |
| * ada-valprint.c (ada_print_scalar): Don't call gdb_flush. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * varobj.c (update_dynamic_varobj_children): Update. |
| (install_default_visualizer): Use reset, not release. |
| * value.c (set_internalvar): Update. |
| * dwarf2loc.c (value_of_dwarf_reg_entry): Update. |
| * common/gdb_ref_ptr.h (class ref_ptr) <release>: Add |
| ATTRIBUTE_UNUSED_RESULT. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * remote.c (class scoped_remote_fd) <release>: Add |
| ATTRIBUTE_UNUSED_RESULT. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * macroexp.c (struct macro_buffer) <release>: Add |
| ATTRIBUTE_UNUSED_RESULT. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * nat/linux-btrace.c (linux_enable_bts, linux_enable_pt): Update. |
| * common/scoped_mmap.h (class scoped_mmap) <release>: Add |
| ATTRIBUTE_UNUSED_RESULT. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * common/scoped_fd.h (class scoped_fd) <release>: Add |
| ATTRIBUTE_UNUSED_RESULT. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * parser-defs.h (struct parser_state) <release>: Add |
| ATTRIBUTE_UNUSED_RESULT. |
| |
| 2019-03-05 Tom Tromey <tromey@adacore.com> |
| |
| * utils.h (class gdb_argv) <release>: Add |
| ATTRIBUTE_UNUSED_RESULT. |
| * common/common-defs.h (ATTRIBUTE_UNUSED_RESULT): Define. |
| |
| 2019-03-02 Eli Zaretskii <eliz@gnu.org> |
| |
| * xml-syscall.c (xml_list_syscalls_by_group): Drop 'struct' from |
| for-loop range, to avoid compiler warnings. |
| |
| * tui/tui.c (tui_enable) [__MINGW32__]: Don't declare 'cap', to |
| avoid compiler warnings about unused variables. |
| |
| * NEWS: Mention end of support for native debugging on MS-Windows |
| before XP. |
| |
| PR gdb/24292 |
| * common/netstuff.c: |
| * gdbserver/gdbreplay.c |
| * gdbserver/remote-utils.c: |
| * ser-tcp.c: |
| * unittests/parse-connection-spec-selftests.c [USE_WIN32API]: |
| Include ws2tcpip.h instead of wsiapi.h and winsock2.h. Redefine |
| _WIN32_WINNT to 0x0501 if defined to a smaller value, as |
| 'getaddrinfo' and 'freeaddrinfo' were not available before |
| Windows XP, and mingw.org's MinGW headers by default define |
| _WIN32_WINNT to 0x500. |
| |
| 2019-03-01 Gary Benson <gbenson@redhat.com> |
| |
| * coffread.c (coff_start_symtab): Remove unnecessary xstrdup. |
| |
| 2019-02-28 Brian Vandenberg <phantall@gmail.com> |
| Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> |
| |
| PR gdb/8527 |
| * procfs.c (proc_wait_for_stop): Wrap write of PCWSTOP in |
| set_sigint_trap, clear_sigint_trap. |
| |
| 2019-02-27 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * target.c (target_detach): Clear the regcache and the |
| frame cache. |
| |
| 2019-02-27 Pedro Alves <palves@redhat.com> |
| |
| * utils.c (set_screen_size): When we cap the height/width sizes, |
| tweak the corresponding command variable to show "unlimited": |
| |
| 2019-02-27 Saagar Jha <saagar@saagarjha.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * utils.c (set_screen_size): Reduce "infinite" rows and columns |
| before calling rl_set_screen_size. |
| |
| 2019-02-27 Tom Tromey <tromey@adacore.com> |
| |
| * configure.ac (HAVE_LIBPYTHON2_4, HAVE_LIBPYTHON2_5): Never |
| define. |
| * python/py-value.c: Remove Python 2.4 workaround. |
| * python/py-utils.c (gdb_pymodule_addobject): Remove Python 2.4 |
| workaround. |
| * python/py-type.c (convert_field, gdbpy_initialize_types): Remove |
| Python 2.4 workaround. |
| * python/python-internal.h: Remove Python 2.4 comment. |
| (Py_ssize_t): Don't define. |
| (PyVarObject_HEAD_INIT, Py_TYPE): Don't define. |
| (gdb_Py_DECREF): Remove Python 2.4 workaround. |
| (gdb_PyObject_GetAttrString, PyObject_GetAttrString): Remove. |
| (gdb_PyObject_HasAttrString, PyObject_HasAttrString): Remove. |
| * python/python.c (do_start_initialization): Remove Python 2.4 |
| workaround. |
| * python/py-prettyprint.c (class dummy_python_frame): Remove. |
| (print_children): Remove Python 2.4 workaround. |
| * python/py-inferior.c (buffer_procs): Remove Python 2.4 |
| workaround. |
| (CHARBUFFERPROC_NAME): Remove. |
| * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Remove |
| Python 2.4 workaround. |
| |
| 2019-02-27 Kevin Buettner <kevinb@redhat.com> |
| |
| * NEWS: Note minimum Python version. |
| |
| 2019-02-27 Kevin Buettner <kevinb@redhat.com> |
| |
| * python/py-inferior.c (infpy_write_memory): Remove non-IS_PY3K |
| code from these functions. Remove corresponding ifdefs. Use |
| Py_buffer_up instead of explicit calls to PyBuffer_Release. |
| Remove gotos and target of gotos. |
| (infpy_search_memory): Likewise. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/hppa-tdep.c (hppa_dummy_id): Delete. |
| (hppa_gdbarch_init): Don't register deleted functions with |
| gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/h8300-tdep.c (h8300_unwind_pc): Delete. |
| (h8300_unwind_sp): Delete. |
| (h8300_dummy_id): Delete. |
| (h8300_gdbarch_init): Don't register deleted functions with |
| gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/ft32-tdep.c (ft32_dummy_id): Delete. |
| (ft32_unwind_pc): Delete. |
| (ft32_unwind_sp): Delete. |
| (ft32_gdbarch_init): Don't register deleted functions with |
| gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/frv-tdep.c (frv_dummy_id): Delete. |
| (frv_unwind_pc): Delete. |
| (frv_unwind_sp): Delete. |
| (frv_gdbarch_init): Don't register deleted functions with |
| gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/riscv-tdep.c (riscv_dummy_id): Delete. |
| (riscv_unwind_pc): Delete. |
| (riscv_unwind_sp): Delete. |
| (riscv_gdbarch_init): Don't register deleted functions with |
| gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/csky-tdep.c (csky_dummy_id): Delete. |
| (csky_unwind_pc): Delete. |
| (csky_unwind_sp): Delete. |
| (csky_gdbarch_init): Don't register deleted functions with |
| gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/cris-tdep.c (cris_dummy_id): Delete. |
| (cris_unwind_pc): Delete. |
| (cris_unwind_sp): Delete. |
| (cris_gdbarch_init): Don't register deleted functions with |
| gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/bfin-tdep.c (bfin_dummy_id): Delete. |
| (bfin_unwind_pc): Delete. |
| (bfin_gdbarch_init): Don't register deleted functions with gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/arm-tdep.c (arm_dummy_id): Delete. |
| (arm_unwind_pc): Delete. |
| (arm_unwind_sp): Delete. |
| (arm_gdbarch_init): Don't register deleted functions with gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/arc-tdep.c (arc_dummy_id): Delete. |
| (arc_unwind_pc): Delete. |
| (arc_unwind_sp): Delete. |
| (arc_gdbarch_init): Don't register deleted functions with gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/alpha-tdep.c (alpha_dummy_id): Delete. |
| (alpha_unwind_pc): Delete. |
| (alpha_gdbarch_init): Don't register deleted functions with |
| gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdb/aarch64-tdep.c (aarch64_dummy_id): Delete. |
| (aarch64_unwind_pc): Delete. |
| (aarch64_unwind_sp): Delete. |
| (aarch64_gdbarch_init): Don't register deleted functions with |
| gdbarch. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdbtypes.c (type_align): Don't consider static members when |
| computing structure alignment. |
| |
| 2019-02-27 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * arc-tdep.c (arc_type_align): Provide alignment for basic types, |
| return 0 for other types. |
| * arch-utils.c (default_type_align): Always return 0. |
| * gdbarch.h: Regenerate. |
| * gdbarch.sh (type_align): Extend comment. |
| * gdbtypes.c (type_align): Add additional comments, always call |
| gdbarch_type_align before applying the default rules. |
| * i386-tdep.c (i386_type_align): Return 0 as the default rule, |
| generic code will then apply a suitable default. |
| * nios2-tdep.c (nios2_type_align): Provide alignment for basic |
| types, return 0 for other types. |
| |
| 2019-02-27 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Create a new section for the next release branch. |
| Rename the section of the current branch, now that it has |
| been cut. |
| |
| 2019-02-27 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 8.3 branch created (143420fb0d5ae54323ba9953f0818c194635228d): |
| * version.in: Bump version to 8.3.50.DATE-git. |
| |
| 2019-02-26 Simon Marchi <simon.marchi@efficios.com> |
| |
| * aix-thread.c (ptid_cmp): Remove unused variable. |
| (get_signaled_thread): Likewise. |
| (store_regs_user_thread): Likewise. |
| (store_regs_kernel_thread): Likewise. |
| (fetch_regs_kernel_thread): Remove shadowed variable. |
| |
| 2019-02-26 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * features/riscv/32bit-cpu.xml: Add register numbers. |
| * features/riscv/32bit-fpu.c: Regenerate. |
| * features/riscv/32bit-fpu.xml: Add register numbers. |
| * features/riscv/64bit-cpu.xml: Add register numbers. |
| * features/riscv/64bit-fpu.c: Regenerate. |
| * features/riscv/64bit-fpu.xml: Add register numbers. |
| |
| 2019-02-26 Kevin Buettner <kevinb@redhat.com> |
| |
| * NEWS: Mention two argument form of gdb.Value constructor. |
| * python/py-value.c (convert_buffer_and_type_to_value): New |
| function. |
| (valpy_new): Parse arguments via gdb_PyArg_ParseTupleAndKeywords. |
| Add support for handling an optional second argument. Call |
| convert_buffer_and_type_to_value as appropriate. |
| * python/python-internal.h (Py_buffer_deleter): New struct. |
| (Py_buffer_up): New typedef. |
| |
| 2019-02-25 John Baldwin <jhb@FreeBSD.org> |
| |
| * dwarf2read.c (dwarf2_get_dwz_file): Reset dwz_bfd to nullptr |
| instead of releasing ownership. |
| |
| 2019-02-25 Jordan Rupprecht <rupprecht@google.com> |
| |
| * dwarf2read.c (open_and_init_dwp_file): Call |
| elf_numsections instead of bfd_count_sections to initialize |
| dwp_file->num_sections. |
| |
| 2019-02-25 Tom Tromey <tromey@adacore.com> |
| |
| * solib-darwin.c (darwin_get_dyld_bfd): Don't release dyld_bfd. |
| |
| 2019-02-23 Sergio Durigan Junior <sergiodj@redhat.com> |
| |
| * gcore.in: Add '--readnever' option when invoking GDB. |
| |
| 2019-02-22 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2019-02-22 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * build-id.c (build_id_to_debug_bfd_1): New function. |
| (build_id_to_debug_bfd): Look for separate debug file in |
| sysroot. |
| |
| 2019-02-22 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdbarch.sh: Update the copyright year range that is placed into |
| generated files. |
| |
| 2019-02-22 Keith Seitz <keiths@redhat.com> |
| |
| PR symtab/23853 |
| * linespec.c (create_sals_line_offset): Search for the default |
| symtab's filename instead of its fullname. |
| |
| 2019-02-21 Alan Hayward <alan.hayward@arm.com> |
| |
| * NEWS: Update style defaults. |
| |
| 2019-02-21 Alan Hayward <alan.hayward@arm.com> |
| |
| * main.c (captured_main_1): Disable styling in batch mode. |
| |
| 2019-02-20 Tom Tromey <tom@tromey.com> |
| |
| * symtab.c (symtab_symbol_info): Fix typos. |
| |
| 2019-02-20 Tom Tromey <tromey@adacore.com> |
| |
| * findcmd.c (_initialize_mem_search): Use upper case for |
| metasyntactic variables. |
| |
| 2019-02-20 Alan Hayward <alan.hayward@arm.com> |
| |
| * aarch64-tdep.c (aarch64_add_reggroups): New function. |
| (aarch64_gdbarch_init): Call aarch64_add_reggroups. |
| |
| 2019-02-19 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * top.h (source_file_name): Change to std::string. |
| * top.c (source_file_name): Likewise. |
| (command_line_input): Adjust. |
| * cli/cli-script.c (script_from_file): Adjust. |
| |
| 2019-02-19 Tom Tromey <tromey@adacore.com> |
| |
| * ravenscar-thread.c |
| (ravenscar_thread_target::update_thread_list): Don't call |
| ada_build_task_list. |
| * ada-lang.h (ada_build_task_list): Don't declare. |
| * ada-tasks.c (struct ada_tasks_inferior_data) |
| <task_list_valid_p>: Now bool. |
| (read_known_tasks, ada_task_list_changed) |
| (ada_tasks_invalidate_inferior_data): Update. |
| (read_known_tasks_array): Return bool. |
| (read_known_tasks_list): Likewise. |
| (read_known_tasks): Return void. |
| (ada_build_task_list): Now static. |
| |
| 2019-02-18 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdbtypes.c (type_align): Allow alignment of TYPE_CODE_METHODPTR |
| and TYPE_CODE_MEMBERPTR to be overridden by the gdbarch. |
| |
| 2019-02-18 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * ada-task.c (_initialize_tasks): Use 'with_cleanup' register |
| variant for ada_tasks_pspace_data_handle and |
| ada_tasks_inferior_data_handle. |
| (ada_tasks_pspace_data_cleanup): New function. |
| (ada_tasks_inferior_data_cleanup): New function. |
| |
| 2019-02-17 Tom Tromey <tom@tromey.com> |
| |
| * macrotab.h (macro_source_fullname): Return a std::string. |
| * macrotab.c (macro_include, check_for_redefinition) |
| (macro_undef, macro_lookup_definition, foreach_macro) |
| (foreach_macro_in_scope): Update. |
| (macro_source_fullname): Return a std::string. |
| * macrocmd.c (show_pp_source_pos): Update. |
| |
| 2019-02-17 Tom Tromey <tom@tromey.com> |
| |
| * macrocmd.c (show_pp_source_pos): Style the file names. |
| |
| 2019-02-17 Tom Tromey <tom@tromey.com> |
| |
| PR tui/24197: |
| * tui/tui-source.c (tui_set_source_content_nil): Rewrite. |
| |
| 2019-02-17 Tom Tromey <tom@tromey.com> |
| |
| * ada-lang.c (user_select_syms): Use filtered printing. |
| * utils.c (wrap_style): New global. |
| (desired_style): Remove. |
| (emit_style_escape): Add stream parameter. |
| (set_output_style, reset_terminal_style, prompt_for_continue): |
| Update. |
| (flush_wrap_buffer): Only flush gdb_stdout. |
| (wrap_here): Set wrap_style. |
| (fputs_maybe_filtered): Clear the wrap buffer on exception. Don't |
| treat escape sequences as a character. Change when wrap buffer is |
| flushed. |
| (fputs_styled): Do not set the output style when the default is |
| requested. |
| * ui-style.h (struct ui_file_style) <is_default>: New method. |
| * source.c (print_source_lines_base): Emit escape sequences in one |
| piece. |
| |
| 2019-02-17 Joel Brobecker <brobecker@adacore.com> |
| |
| * gdbtypes.c (type_align): Handle TYPE_CODE_RANGE the same as |
| integers and enumeration types. |
| |
| 2019-02-17 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (standard_lookup): Use ada_lookup_encoded_symbol |
| instead of lookup_symbol_in_language |
| (do_exact_match): New function. |
| (ada_get_symbol_name_matcher): Return do_exact_match when |
| doing a verbatim match. |
| |
| 2019-02-15 Tom Tromey <tromey@adacore.com> |
| |
| * ravenscar-thread.c (ravenscar_thread_target::resume) |
| (ravenscar_thread_target::wait): Special case wildcard requests. |
| |
| 2019-02-15 Tom Tromey <tromey@adacore.com> |
| |
| * ravenscar-thread.c (base_ptid): Remove. |
| (struct ravenscar_thread_target) <close>: New method. |
| <m_base_ptid>: New member. |
| <update_inferior_ptid, active_task, task_is_currently_active, |
| runtime_initialized>: Declare methods. |
| <ravenscar_thread_target>: Add constructor. |
| (ravenscar_thread_target::task_is_currently_active) |
| (ravenscar_thread_target::update_inferior_ptid) |
| (ravenscar_runtime_initialized): Rename. Now methods. |
| (ravenscar_thread_target::resume, ravenscar_thread_target::wait) |
| (ravenscar_thread_target::update_thread_list): Update. |
| (ravenscar_thread_target::active_task): Now method. |
| (ravenscar_thread_target::store_registers) |
| (ravenscar_thread_target::prepare_to_store) |
| (ravenscar_thread_target::prepare_to_store) |
| (ravenscar_thread_target::mourn_inferior): Update. |
| (ravenscar_inferior_created): Use "new" to create target. |
| (ravenscar_thread_target::get_ada_task_ptid): Update. |
| (_initialize_ravenscar): Don't initialize base_ptid. |
| (ravenscar_ops): Remove global. |
| |
| 2019-02-15 Tom Tromey <tromey@adacore.com> |
| |
| * target.h (push_target): Declare new overload. |
| * target.c (push_target): New overload, taking an rvalue reference. |
| * remote.c (remote_target::open_1): Use push_target overload. |
| * corelow.c (core_target_open): Use push_target overload. |
| |
| 2019-02-15 Tom Tromey <tromey@adacore.com> |
| |
| * ravenscar-thread.c (is_ravenscar_task) |
| (ravenscar_task_is_currently_active): Return bool. |
| (ravenscar_update_inferior_ptid, get_running_thread_msymbol) |
| (_initialize_ravenscar): Remove "(void)". |
| (has_ravenscar_runtime, ravenscar_runtime_initialized): Likewise. |
| Return bool. |
| |
| 2019-02-15 Tom Tromey <tromey@adacore.com> |
| |
| * ravenscar-thread.c (ravenscar_runtime_initializer) |
| (has_ravenscar_runtime, get_running_thread_id) |
| (ravenscar_thread_target::resume): Fix indentation. |
| |
| 2019-02-15 Tom Tromey <tromey@adacore.com> |
| |
| * sparc-ravenscar-thread.c (struct sparc_ravenscar_ops): Derive |
| from ravenscar_arch_ops. |
| (sparc_ravenscar_ops::fetch_registers) |
| (sparc_ravenscar_ops::store_registers): Now methods. |
| (sparc_ravenscar_prepare_to_store): Remove. |
| (sparc_ravenscar_ops): Redefine. |
| * ravenscar-thread.h (struct ravenscar_arch_ops): Add virtual |
| methods and destructor. Remove members. |
| * ravenscar-thread.c (ravenscar_thread_target::fetch_registers) |
| (ravenscar_thread_target::store_registers) |
| (ravenscar_thread_target::prepare_to_store): Update. |
| * ppc-ravenscar-thread.c (ppc_ravenscar_generic_prepare_to_store): |
| Remove. |
| (struct ppc_ravenscar_powerpc_ops): Derive from |
| ravenscar_arch_ops. |
| (ppc_ravenscar_powerpc_ops::fetch_registers) |
| (ppc_ravenscar_powerpc_ops::store_registers): Now methods. |
| (ppc_ravenscar_powerpc_ops): Redefine. |
| (struct ppc_ravenscar_e500_ops): Derive from ravenscar_arch_ops. |
| (ppc_ravenscar_e500_ops::fetch_registers) |
| (ppc_ravenscar_e500_ops::store_registers): Now methods. |
| (ppc_ravenscar_e500_ops): Redefine. |
| * aarch64-ravenscar-thread.c |
| (aarch64_ravenscar_generic_prepare_to_store): Remove. |
| (struct aarch64_ravenscar_ops): Derive from ravenscar_arch_ops. |
| (aarch64_ravenscar_fetch_registers) |
| (aarch64_ravenscar_store_registers): Now methods. |
| (aarch64_ravenscar_ops): Redefine. |
| |
| 2019-02-15 Tom Tromey <tromey@adacore.com> |
| |
| * ravenscar-thread.c (ravenscar_thread_target::stopped_by_sw_breakpoint) |
| (ravenscar_thread_target::stopped_by_hw_breakpoint) |
| (ravenscar_thread_target::stopped_by_watchpoint) |
| (ravenscar_thread_target::stopped_data_address) |
| (ravenscar_thread_target::core_of_thread): Use scoped_restore. |
| |
| 2019-02-15 Tom Tromey <tromey@adacore.com> |
| |
| * ravenscar-thread.c: Fix some typos. |
| |
| 2019-02-15 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| Tom Tromey <tromey@adacore.com> |
| |
| * ada-lang.c (ada_exception_sal): Change addr_string to a |
| std::string. |
| (create_ada_exception_catchpoint): Update. |
| |
| 2019-02-15 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| Tom Tromey <tromey@adacore.com> |
| |
| * breakpoint.c (~bp_location): Rename from bp_location_dtor. |
| (bp_location_ops): Remove. |
| (base_breakpoint_allocate_location): Update. |
| (free_bp_location): Update. |
| * ada-lang.c (class ada_catchpoint_location) |
| <ada_catchpoint_location>: Remove ops parameter. |
| (ada_catchpoint_location_dtor): Remove. |
| (ada_catchpoint_location_ops): Remove. |
| (allocate_location_exception): Update. |
| * breakpoint.h (struct bp_location_ops): Remove. |
| (class bp_location) <bp_location>: Remove bp_location_ops |
| parameter. |
| <~bp_location>: Add destructor. |
| <ops>: Remove. |
| |
| 2019-02-14 Thomas Schwinge <thomas@codesourcery.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * remote.c (remote_target::remote_parse_stop_reply): Avoid using |
| 'PATH_MAX'. |
| |
| 2019-02-14 David Michael <fedora.dm0@gmail.com> |
| Samuel Thibault <samuel.thibault@gnu.org> |
| Thomas Schwinge <thomas@codesourcery.com> |
| |
| * gnu-nat.c (S_proc_getmsgport_reply, S_proc_task2proc_reply) |
| (S_proc_pid2proc_reply): Adjust to Hurd "proc" interface changes. |
| |
| 2019-02-14 Thomas Schwinge <thomas@codesourcery.com> |
| |
| * gnu-nat.c (gnu_write_inferior, parse_int_arg, _parse_bool_arg) |
| (check_empty): Use "const char *". |
| |
| * gnu-nat.c (gnu_nat_target::detach): Instead of |
| 'detach_inferior (pid)' call |
| 'detach_inferior (find_inferior_pid (pid))'. |
| |
| * configure.nat [gdb_host == i386gnu] (NATDEPFILES): Add |
| 'nat/fork-inferior.o'. |
| * gnu-nat.c: #include "nat/fork-inferior.h". |
| |
| * gnu-nat.c (gnu_nat_target::detach): Instead of |
| 'inf_child_maybe_unpush_target (ops)' call 'maybe_unpush_target'. |
| * gnu-nat.h: #include "inf-child.h". |
| * i386-gnu-nat.c (gnu_fetch_registers): Rename/move to |
| 'i386_gnu_nat_target::fetch_registers'. |
| (gnu_store_registers): Rename/move to |
| 'i386_gnu_nat_target::store_registers'. |
| |
| * config/i386/nm-i386gnu.h: Don't "#include" any files. |
| * gnu-nat.h (mach_thread_info): New function. |
| * gnu-nat.c (thread_takeover_sc_cmd): Use it. |
| |
| * config/i386/nm-i386gnu.h (gnu_target_pid_to_str): Remove. |
| |
| 2019-02-14 Frederic Konrad <konrad@adacore.com> |
| |
| * riscv-rdep.c (riscv_type_alignment): Handle TYPE_CODE_RANGE. |
| |
| 2019-02-14 Joel Brobecker <brobecker@adacore.com> |
| |
| * windows-nat.c (windows_add_thread): Add new parameter |
| "main_thread_p" with default value set to false. Update |
| function documentation as well as all callers. |
| (windows_delete_thread): Likewise. |
| (fake_create_process): Update call to windows_add_thread. |
| (get_windows_debug_event) <CREATE_THREAD_DEBUG_EVENT> |
| <CREATE_PROCESS_DEBUG_EVENT>: Likewise. |
| <EXIT_THREAD_DEBUG_EVENT, EXIT_PROCESS_DEBUG_EVENT>: Update |
| call to windows_delete_thread. |
| |
| 2019-02-13 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * MAINTAINERS: Add Andrew Burgess as global maintainer. |
| |
| 2019-02-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * symfile.c (find_separate_debug_file): Use canonical path of |
| sysroot with child_path instead of gdb_sysroot if it is valid. |
| |
| 2019-02-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * symfile.c (find_separate_debug_file): Use child_path to |
| determine if an object file is under a sysroot. |
| |
| 2019-02-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add |
| unittests/child-path-selftests.c. |
| * common/pathstuff.c (child_path): New function. |
| * common/pathstuff.h (child_path): New prototype. |
| * unittests/child-path-selftests.c: New file. |
| |
| 2019-02-12 John Baldwin <jhb@FreeBSD.org> |
| |
| * symfile.c (find_separate_debug_file): Look for separate debug |
| files in debug directories under the sysroot. |
| |
| 2019-02-12 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * symtab.h (struct minimal_symbol data_p): New const method. |
| (struct minimal_symbol text_p): Likewise. |
| * symtab.c (output_source_filename): Use file name style |
| to print file name. |
| (print_symbol_info): Likewise. |
| (print_msymbol_info): Use address style to print addresses. |
| Use function name style to print executable text symbols. |
| (expand_symtab_containing_pc): Use data_p. |
| (find_pc_sect_compunit_symtab): Likewise. |
| |
| 2019-02-12 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * breakpoint.c (describe_other_breakpoints): Use address style |
| to print addresses. |
| (say_where): Likewise. |
| |
| 2019-02-12 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * ada-typeprint.c (print_func_type): Print function name |
| style to print function name. |
| * c-typeprint.c (c_print_type_1): Likewise. |
| |
| 2019-02-11 Alan Hayward <alan.hayward@arm.com> |
| |
| * aarch64-linux-tdep.c (aarch64_linux_get_syscall_number): Check |
| for execve. |
| |
| 2019-02-10 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * c-exp.y (direct_abs_decl): Use emplace_back to record the |
| type_stack. |
| |
| 2019-02-10 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-varobj.c (ada_value_is_changeable_p): Add handling of |
| TYPE_CODE_REF types. |
| |
| 2019-02-08 Jim Wilson <jimw@sifive.com> |
| |
| * riscv-linux-tdep.c (riscv_linux_fregmap): New. |
| (riscv_linux_fregset): New. |
| (riscv_linux_iterate_over_regset_sections): Call cb for .reg2 section. |
| |
| 2019-02-07 Tom Tromey <tom@tromey.com> |
| |
| * thread.c (thread_cancel_execution_command): Update. |
| * thread-fsm.h (struct thread_fsm): Add constructor, destructor, |
| methods. |
| (struct thread_fsm_ops): Remove. |
| (thread_fsm_ctor, thread_fsm_delete, thread_fsm_clean_up) |
| (thread_fsm_should_stop, thread_fsm_return_value) |
| (thread_fsm_set_finished, thread_fsm_finished_p) |
| (thread_fsm_async_reply_reason, thread_fsm_should_notify_stop): |
| Don't declare. |
| * mi/mi-interp.c (mi_on_normal_stop_1): Update. |
| * infrun.c (clear_proceed_status_thread) |
| (clean_up_just_stopped_threads_fsms, fetch_inferior_event) |
| (print_stop_event): Update. |
| * infcmd.c (struct step_command_fsm): Inherit from thread_fsm. |
| Add constructor. |
| (step_command_fsm_ops): Remove. |
| (new_step_command_fsm): Remove. |
| (step_1): Update. |
| (step_command_fsm::should_stop): Rename from |
| step_command_fsm_should_stop. |
| (step_command_fsm::clean_up): Rename from |
| step_command_fsm_clean_up. |
| (step_command_fsm::do_async_reply_reason): Rename from |
| step_command_fsm_async_reply_reason. |
| (struct until_next_fsm): Inherit from thread_fsm. Add |
| constructor. |
| (until_next_fsm_ops): Remove. |
| (new_until_next_fsm): Remove. |
| (until_next_fsm::should_stop): Rename from |
| until_next_fsm_should_stop. |
| (until_next_fsm::clean_up): Rename from until_next_fsm_clean_up. |
| (until_next_fsm::do_async_reply_reason): Rename from |
| until_next_fsm_async_reply_reason. |
| (struct finish_command_fsm): Inherit from thread_fsm. Add |
| constructor. Change type of breakpoint. |
| (finish_command_fsm_ops): Remove. |
| (new_finish_command_fsm): Remove. |
| (finish_command_fsm::should_stop): Rename from |
| finish_command_fsm_should_stop. |
| (finish_command_fsm::clean_up): Rename from |
| finish_command_fsm_clean_up. |
| (finish_command_fsm::return_value): Rename from |
| finish_command_fsm_return_value. |
| (finish_command_fsm::do_async_reply_reason): Rename from |
| finish_command_fsm_async_reply_reason. |
| (finish_command): Update. |
| * infcall.c (struct call_thread_fsm): Inherit from thread_fsm. |
| Add constructor. |
| (call_thread_fsm_ops): Remove. |
| (call_thread_fsm::call_thread_fsm): Rename from |
| new_call_thread_fsm. |
| (call_thread_fsm::should_stop): Rename from |
| call_thread_fsm_should_stop. |
| (call_thread_fsm::should_notify_stop): Rename from |
| call_thread_fsm_should_notify_stop. |
| (run_inferior_call, call_function_by_hand_dummy): Update. |
| * cli/cli-interp.c (should_print_stop_to_console): Update. |
| * breakpoint.c (struct until_break_fsm): Inherit from thread_fsm. |
| Add constructor. Change type of location_breakpoint, |
| caller_breakpoint. |
| (until_break_fsm_ops): Remove. |
| (new_until_break_fsm): Remove. |
| (until_break_fsm::should_stop): Rename from |
| until_break_fsm_should_stop. |
| (until_break_fsm::clean_up): Rename from |
| until_break_fsm_clean_up. |
| (until_break_fsm::do_async_reply_reason): Rename from |
| until_break_fsm_async_reply_reason. |
| (until_break_command): Update. |
| * thread-fsm.c: Remove. |
| * Makefile.in (COMMON_SFILES): Remove thread-fsm.c. |
| |
| 2019-02-07 Tom Tromey <tom@tromey.com> |
| |
| * yy-remap.h: Add include guard. |
| * xtensa-tdep.h: Add include guard. |
| * xcoffread.h: Rename include guard. |
| * varobj-iter.h: Add include guard. |
| * tui/tui.h: Rename include guard. |
| * tui/tui-winsource.h: Rename include guard. |
| * tui/tui-wingeneral.h: Rename include guard. |
| * tui/tui-windata.h: Rename include guard. |
| * tui/tui-win.h: Rename include guard. |
| * tui/tui-stack.h: Rename include guard. |
| * tui/tui-source.h: Rename include guard. |
| * tui/tui-regs.h: Rename include guard. |
| * tui/tui-out.h: Rename include guard. |
| * tui/tui-layout.h: Rename include guard. |
| * tui/tui-io.h: Rename include guard. |
| * tui/tui-hooks.h: Rename include guard. |
| * tui/tui-file.h: Rename include guard. |
| * tui/tui-disasm.h: Rename include guard. |
| * tui/tui-data.h: Rename include guard. |
| * tui/tui-command.h: Rename include guard. |
| * tic6x-tdep.h: Add include guard. |
| * target/waitstatus.h: Rename include guard. |
| * target/wait.h: Rename include guard. |
| * target/target.h: Rename include guard. |
| * target/resume.h: Rename include guard. |
| * target-float.h: Rename include guard. |
| * stabsread.h: Add include guard. |
| * rs6000-tdep.h: Add include guard. |
| * riscv-fbsd-tdep.h: Add include guard. |
| * regformats/regdef.h: Rename include guard. |
| * record.h: Rename include guard. |
| * python/python.h: Rename include guard. |
| * python/python-internal.h: Rename include guard. |
| * python/py-stopevent.h: Rename include guard. |
| * python/py-ref.h: Rename include guard. |
| * python/py-record.h: Rename include guard. |
| * python/py-record-full.h: Rename include guard. |
| * python/py-record-btrace.h: Rename include guard. |
| * python/py-instruction.h: Rename include guard. |
| * python/py-events.h: Rename include guard. |
| * python/py-event.h: Rename include guard. |
| * procfs.h: Add include guard. |
| * proc-utils.h: Add include guard. |
| * p-lang.h: Add include guard. |
| * or1k-tdep.h: Rename include guard. |
| * observable.h: Rename include guard. |
| * nto-tdep.h: Rename include guard. |
| * nat/x86-linux.h: Rename include guard. |
| * nat/x86-linux-dregs.h: Rename include guard. |
| * nat/x86-gcc-cpuid.h: Add include guard. |
| * nat/x86-dregs.h: Rename include guard. |
| * nat/x86-cpuid.h: Rename include guard. |
| * nat/ppc-linux.h: Rename include guard. |
| * nat/mips-linux-watch.h: Rename include guard. |
| * nat/linux-waitpid.h: Rename include guard. |
| * nat/linux-ptrace.h: Rename include guard. |
| * nat/linux-procfs.h: Rename include guard. |
| * nat/linux-osdata.h: Rename include guard. |
| * nat/linux-nat.h: Rename include guard. |
| * nat/linux-namespaces.h: Rename include guard. |
| * nat/linux-btrace.h: Rename include guard. |
| * nat/glibc_thread_db.h: Rename include guard. |
| * nat/gdb_thread_db.h: Rename include guard. |
| * nat/gdb_ptrace.h: Rename include guard. |
| * nat/fork-inferior.h: Rename include guard. |
| * nat/amd64-linux-siginfo.h: Rename include guard. |
| * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. |
| * nat/aarch64-sve-linux-ptrace.h: Rename include guard. |
| * nat/aarch64-linux.h: Rename include guard. |
| * nat/aarch64-linux-hw-point.h: Rename include guard. |
| * mn10300-tdep.h: Add include guard. |
| * mips-linux-tdep.h: Add include guard. |
| * mi/mi-parse.h: Rename include guard. |
| * mi/mi-out.h: Rename include guard. |
| * mi/mi-main.h: Rename include guard. |
| * mi/mi-interp.h: Rename include guard. |
| * mi/mi-getopt.h: Rename include guard. |
| * mi/mi-console.h: Rename include guard. |
| * mi/mi-common.h: Rename include guard. |
| * mi/mi-cmds.h: Rename include guard. |
| * mi/mi-cmd-break.h: Rename include guard. |
| * m2-lang.h: Add include guard. |
| * location.h: Rename include guard. |
| * linux-record.h: Rename include guard. |
| * linux-nat.h: Add include guard. |
| * linux-fork.h: Add include guard. |
| * i386-darwin-tdep.h: Rename include guard. |
| * hppa-linux-offsets.h: Add include guard. |
| * guile/guile.h: Rename include guard. |
| * guile/guile-internal.h: Rename include guard. |
| * gnu-nat.h: Rename include guard. |
| * gdb-stabs.h: Rename include guard. |
| * frv-tdep.h: Add include guard. |
| * f-lang.h: Add include guard. |
| * event-loop.h: Add include guard. |
| * darwin-nat.h: Rename include guard. |
| * cp-abi.h: Rename include guard. |
| * config/sparc/nm-sol2.h: Rename include guard. |
| * config/nm-nto.h: Rename include guard. |
| * config/nm-linux.h: Add include guard. |
| * config/i386/nm-i386gnu.h: Rename include guard. |
| * config/djgpp/nl_types.h: Rename include guard. |
| * config/djgpp/langinfo.h: Rename include guard. |
| * compile/gcc-cp-plugin.h: Add include guard. |
| * compile/gcc-c-plugin.h: Add include guard. |
| * compile/compile.h: Rename include guard. |
| * compile/compile-object-run.h: Rename include guard. |
| * compile/compile-object-load.h: Rename include guard. |
| * compile/compile-internal.h: Rename include guard. |
| * compile/compile-cplus.h: Rename include guard. |
| * compile/compile-c.h: Rename include guard. |
| * common/xml-utils.h: Rename include guard. |
| * common/x86-xstate.h: Rename include guard. |
| * common/version.h: Rename include guard. |
| * common/vec.h: Rename include guard. |
| * common/tdesc.h: Rename include guard. |
| * common/selftest.h: Rename include guard. |
| * common/scoped_restore.h: Rename include guard. |
| * common/scoped_mmap.h: Rename include guard. |
| * common/scoped_fd.h: Rename include guard. |
| * common/safe-iterator.h: Rename include guard. |
| * common/run-time-clock.h: Rename include guard. |
| * common/refcounted-object.h: Rename include guard. |
| * common/queue.h: Rename include guard. |
| * common/ptid.h: Rename include guard. |
| * common/print-utils.h: Rename include guard. |
| * common/preprocessor.h: Rename include guard. |
| * common/pathstuff.h: Rename include guard. |
| * common/observable.h: Rename include guard. |
| * common/netstuff.h: Rename include guard. |
| * common/job-control.h: Rename include guard. |
| * common/host-defs.h: Rename include guard. |
| * common/gdb_wait.h: Rename include guard. |
| * common/gdb_vecs.h: Rename include guard. |
| * common/gdb_unlinker.h: Rename include guard. |
| * common/gdb_unique_ptr.h: Rename include guard. |
| * common/gdb_tilde_expand.h: Rename include guard. |
| * common/gdb_sys_time.h: Rename include guard. |
| * common/gdb_string_view.h: Rename include guard. |
| * common/gdb_splay_tree.h: Rename include guard. |
| * common/gdb_setjmp.h: Rename include guard. |
| * common/gdb_ref_ptr.h: Rename include guard. |
| * common/gdb_optional.h: Rename include guard. |
| * common/gdb_locale.h: Rename include guard. |
| * common/gdb_assert.h: Rename include guard. |
| * common/filtered-iterator.h: Rename include guard. |
| * common/filestuff.h: Rename include guard. |
| * common/fileio.h: Rename include guard. |
| * common/environ.h: Rename include guard. |
| * common/common-utils.h: Rename include guard. |
| * common/common-types.h: Rename include guard. |
| * common/common-regcache.h: Rename include guard. |
| * common/common-inferior.h: Rename include guard. |
| * common/common-gdbthread.h: Rename include guard. |
| * common/common-exceptions.h: Rename include guard. |
| * common/common-defs.h: Rename include guard. |
| * common/common-debug.h: Rename include guard. |
| * common/cleanups.h: Rename include guard. |
| * common/buffer.h: Rename include guard. |
| * common/btrace-common.h: Rename include guard. |
| * common/break-common.h: Rename include guard. |
| * cli/cli-utils.h: Rename include guard. |
| * cli/cli-style.h: Rename include guard. |
| * cli/cli-setshow.h: Rename include guard. |
| * cli/cli-script.h: Rename include guard. |
| * cli/cli-interp.h: Rename include guard. |
| * cli/cli-decode.h: Rename include guard. |
| * cli/cli-cmds.h: Rename include guard. |
| * charset-list.h: Add include guard. |
| * buildsym-legacy.h: Rename include guard. |
| * bfin-tdep.h: Add include guard. |
| * ax.h: Rename include guard. |
| * arm-linux-tdep.h: Add include guard. |
| * arm-fbsd-tdep.h: Add include guard. |
| * arch/xtensa.h: Rename include guard. |
| * arch/tic6x.h: Add include guard. |
| * arch/i386.h: Add include guard. |
| * arch/arm.h: Rename include guard. |
| * arch/arm-linux.h: Rename include guard. |
| * arch/arm-get-next-pcs.h: Rename include guard. |
| * arch/amd64.h: Add include guard. |
| * arch/aarch64-insn.h: Rename include guard. |
| * arch-utils.h: Rename include guard. |
| * annotate.h: Add include guard. |
| * amd64-darwin-tdep.h: Rename include guard. |
| * aarch64-linux-tdep.h: Add include guard. |
| * aarch64-fbsd-tdep.h: Add include guard. |
| * aarch32-linux-nat.h: Add include guard. |
| |
| 2019-02-06 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * macrotab.c (macro_define_internal): New function that |
| factorizes macro_define_object_internal and macro_define_function |
| code. |
| (macro_define_object_internal): Use macro_define_internal. |
| (macro_define_function): Likewise. |
| |
| 2019-02-06 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * macrocmd.c (extract_identifier): Return |
| a gdb::unique_xmalloc_ptr<char> instead of a char *, and update |
| callers. |
| |
| 2019-02-06 John Baldwin <jhb@FreeBSD.org> |
| |
| * fbsd-nat.c (fbsd_fetch_cmdline): Join arguments with spaces. |
| |
| 2019-02-05 Tom Tromey <tom@tromey.com> |
| |
| * target.c (target_stack::unpush): Move assertion earlier. |
| |
| 2019-01-30 Tom Tromey <tom@tromey.com> |
| |
| PR python/23615: |
| * python/python.c (execute_gdb_command): Use gdbpy_allow_threads. |
| (gdbpy_parse_and_eval): Likewise. |
| * python/python-internal.h (gdbpy_allow_threads): New class. |
| |
| 2019-01-28 John Baldwin <jhb@FreeBSD.org> |
| |
| * aarch64-fbsd-tdep.c (aarch64_fbsd_gregmap) |
| (aarch64_fbsd_fpregmap): Move earlier. |
| (AARCH64_MCONTEXT_REG_SIZE, AARCH64_MCONTEXT_FPREG_SIZE): Delete. |
| (aarch64_fbsd_sigframe_init): Use trad_frame_set_reg_regmap |
| instead of individual calls to trad_frame_set_reg_addr. |
| * arm-fbsd-tdep.c (arm_fbsd_gregmap, arm_fbsd_vfpregmap): Move |
| earlier. |
| (ARM_MCONTEXT_REG_SIZE, ARM_MCONTEXT_VFP_REG_SIZE): Delete. |
| (arm_fbsd_sigframe_init): Use trad_frame_set_reg_regmap |
| instead of individual calls to trad_frame_set_reg_addr. |
| |
| 2019-01-28 Alan Hayward <alan.hayward@arm.com> |
| |
| * CONTRIBUTE: Replace contribution list with wiki link. |
| |
| 2019-01-25 Tom Tromey <tom@tromey.com> |
| |
| * Makefile.in (GDB_CFLAGS): Don't add -I for common. |
| |
| 2019-01-25 Tom Tromey <tom@tromey.com> |
| |
| * xtensa-linux-nat.c: Fix common/ includes. |
| * xml-support.h: Fix common/ includes. |
| * xml-support.c: Fix common/ includes. |
| * x86-linux-nat.c: Fix common/ includes. |
| * windows-nat.c: Fix common/ includes. |
| * varobj.h: Fix common/ includes. |
| * varobj.c: Fix common/ includes. |
| * value.c: Fix common/ includes. |
| * valops.c: Fix common/ includes. |
| * utils.c: Fix common/ includes. |
| * unittests/xml-utils-selftests.c: Fix common/ includes. |
| * unittests/utils-selftests.c: Fix common/ includes. |
| * unittests/unpack-selftests.c: Fix common/ includes. |
| * unittests/tracepoint-selftests.c: Fix common/ includes. |
| * unittests/style-selftests.c: Fix common/ includes. |
| * unittests/string_view-selftests.c: Fix common/ includes. |
| * unittests/scoped_restore-selftests.c: Fix common/ includes. |
| * unittests/scoped_mmap-selftests.c: Fix common/ includes. |
| * unittests/scoped_fd-selftests.c: Fix common/ includes. |
| * unittests/rsp-low-selftests.c: Fix common/ includes. |
| * unittests/parse-connection-spec-selftests.c: Fix common/ |
| includes. |
| * unittests/optional-selftests.c: Fix common/ includes. |
| * unittests/offset-type-selftests.c: Fix common/ includes. |
| * unittests/observable-selftests.c: Fix common/ includes. |
| * unittests/mkdir-recursive-selftests.c: Fix common/ includes. |
| * unittests/memrange-selftests.c: Fix common/ includes. |
| * unittests/memory-map-selftests.c: Fix common/ includes. |
| * unittests/lookup_name_info-selftests.c: Fix common/ includes. |
| * unittests/function-view-selftests.c: Fix common/ includes. |
| * unittests/environ-selftests.c: Fix common/ includes. |
| * unittests/copy_bitwise-selftests.c: Fix common/ includes. |
| * unittests/common-utils-selftests.c: Fix common/ includes. |
| * unittests/cli-utils-selftests.c: Fix common/ includes. |
| * unittests/array-view-selftests.c: Fix common/ includes. |
| * ui-file.c: Fix common/ includes. |
| * tui/tui-io.c: Fix common/ includes. |
| * tracepoint.h: Fix common/ includes. |
| * tracepoint.c: Fix common/ includes. |
| * tracefile-tfile.c: Fix common/ includes. |
| * top.h: Fix common/ includes. |
| * top.c: Fix common/ includes. |
| * thread.c: Fix common/ includes. |
| * target/waitstatus.h: Fix common/ includes. |
| * target/waitstatus.c: Fix common/ includes. |
| * target.h: Fix common/ includes. |
| * target.c: Fix common/ includes. |
| * target-memory.c: Fix common/ includes. |
| * target-descriptions.c: Fix common/ includes. |
| * symtab.h: Fix common/ includes. |
| * symfile.c: Fix common/ includes. |
| * stap-probe.c: Fix common/ includes. |
| * spu-linux-nat.c: Fix common/ includes. |
| * sparc-nat.c: Fix common/ includes. |
| * source.c: Fix common/ includes. |
| * solib.c: Fix common/ includes. |
| * solib-target.c: Fix common/ includes. |
| * ser-unix.c: Fix common/ includes. |
| * ser-tcp.c: Fix common/ includes. |
| * ser-pipe.c: Fix common/ includes. |
| * ser-base.c: Fix common/ includes. |
| * selftest-arch.c: Fix common/ includes. |
| * s12z-tdep.c: Fix common/ includes. |
| * rust-exp.y: Fix common/ includes. |
| * rs6000-aix-tdep.c: Fix common/ includes. |
| * riscv-tdep.c: Fix common/ includes. |
| * remote.c: Fix common/ includes. |
| * remote-notif.h: Fix common/ includes. |
| * remote-fileio.h: Fix common/ includes. |
| * remote-fileio.c: Fix common/ includes. |
| * regcache.h: Fix common/ includes. |
| * regcache.c: Fix common/ includes. |
| * record-btrace.c: Fix common/ includes. |
| * python/python.c: Fix common/ includes. |
| * python/py-type.c: Fix common/ includes. |
| * python/py-inferior.c: Fix common/ includes. |
| * progspace.h: Fix common/ includes. |
| * producer.c: Fix common/ includes. |
| * procfs.c: Fix common/ includes. |
| * proc-api.c: Fix common/ includes. |
| * printcmd.c: Fix common/ includes. |
| * ppc-linux-nat.c: Fix common/ includes. |
| * parser-defs.h: Fix common/ includes. |
| * osdata.c: Fix common/ includes. |
| * obsd-nat.c: Fix common/ includes. |
| * nat/x86-linux.c: Fix common/ includes. |
| * nat/x86-linux-dregs.c: Fix common/ includes. |
| * nat/x86-dregs.h: Fix common/ includes. |
| * nat/x86-dregs.c: Fix common/ includes. |
| * nat/ppc-linux.c: Fix common/ includes. |
| * nat/mips-linux-watch.h: Fix common/ includes. |
| * nat/mips-linux-watch.c: Fix common/ includes. |
| * nat/linux-waitpid.c: Fix common/ includes. |
| * nat/linux-ptrace.h: Fix common/ includes. |
| * nat/linux-ptrace.c: Fix common/ includes. |
| * nat/linux-procfs.c: Fix common/ includes. |
| * nat/linux-personality.c: Fix common/ includes. |
| * nat/linux-osdata.c: Fix common/ includes. |
| * nat/linux-namespaces.c: Fix common/ includes. |
| * nat/linux-btrace.h: Fix common/ includes. |
| * nat/linux-btrace.c: Fix common/ includes. |
| * nat/fork-inferior.c: Fix common/ includes. |
| * nat/amd64-linux-siginfo.c: Fix common/ includes. |
| * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. |
| * nat/aarch64-linux.c: Fix common/ includes. |
| * nat/aarch64-linux-hw-point.h: Fix common/ includes. |
| * nat/aarch64-linux-hw-point.c: Fix common/ includes. |
| * namespace.h: Fix common/ includes. |
| * mips-linux-tdep.c: Fix common/ includes. |
| * minsyms.c: Fix common/ includes. |
| * mi/mi-parse.h: Fix common/ includes. |
| * mi/mi-main.c: Fix common/ includes. |
| * mi/mi-cmd-env.c: Fix common/ includes. |
| * memrange.h: Fix common/ includes. |
| * memattr.c: Fix common/ includes. |
| * maint.h: Fix common/ includes. |
| * maint.c: Fix common/ includes. |
| * main.c: Fix common/ includes. |
| * machoread.c: Fix common/ includes. |
| * location.c: Fix common/ includes. |
| * linux-thread-db.c: Fix common/ includes. |
| * linux-nat.c: Fix common/ includes. |
| * linux-fork.c: Fix common/ includes. |
| * inline-frame.c: Fix common/ includes. |
| * infrun.c: Fix common/ includes. |
| * inflow.c: Fix common/ includes. |
| * inferior.h: Fix common/ includes. |
| * inferior.c: Fix common/ includes. |
| * infcmd.c: Fix common/ includes. |
| * inf-ptrace.c: Fix common/ includes. |
| * inf-child.c: Fix common/ includes. |
| * ia64-linux-nat.c: Fix common/ includes. |
| * i387-tdep.c: Fix common/ includes. |
| * i386-tdep.c: Fix common/ includes. |
| * i386-linux-tdep.c: Fix common/ includes. |
| * i386-linux-nat.c: Fix common/ includes. |
| * i386-go32-tdep.c: Fix common/ includes. |
| * i386-fbsd-tdep.c: Fix common/ includes. |
| * i386-fbsd-nat.c: Fix common/ includes. |
| * guile/scm-type.c: Fix common/ includes. |
| * guile/guile.c: Fix common/ includes. |
| * go32-nat.c: Fix common/ includes. |
| * gnu-nat.c: Fix common/ includes. |
| * gdbthread.h: Fix common/ includes. |
| * gdbarch-selftests.c: Fix common/ includes. |
| * gdb_usleep.c: Fix common/ includes. |
| * gdb_select.h: Fix common/ includes. |
| * gdb_bfd.c: Fix common/ includes. |
| * gcore.c: Fix common/ includes. |
| * fork-child.c: Fix common/ includes. |
| * findvar.c: Fix common/ includes. |
| * fbsd-nat.c: Fix common/ includes. |
| * event-top.c: Fix common/ includes. |
| * event-loop.c: Fix common/ includes. |
| * dwarf2read.c: Fix common/ includes. |
| * dwarf2loc.c: Fix common/ includes. |
| * dwarf2-frame.c: Fix common/ includes. |
| * dwarf-index-cache.c: Fix common/ includes. |
| * dtrace-probe.c: Fix common/ includes. |
| * disasm-selftests.c: Fix common/ includes. |
| * defs.h: Fix common/ includes. |
| * csky-tdep.c: Fix common/ includes. |
| * cp-valprint.c: Fix common/ includes. |
| * cp-support.h: Fix common/ includes. |
| * cp-support.c: Fix common/ includes. |
| * corelow.c: Fix common/ includes. |
| * completer.h: Fix common/ includes. |
| * completer.c: Fix common/ includes. |
| * compile/compile.c: Fix common/ includes. |
| * compile/compile-loc2c.c: Fix common/ includes. |
| * compile/compile-cplus-types.c: Fix common/ includes. |
| * compile/compile-cplus-symbols.c: Fix common/ includes. |
| * command.h: Fix common/ includes. |
| * cli/cli-dump.c: Fix common/ includes. |
| * cli/cli-cmds.c: Fix common/ includes. |
| * charset.c: Fix common/ includes. |
| * build-id.c: Fix common/ includes. |
| * btrace.h: Fix common/ includes. |
| * btrace.c: Fix common/ includes. |
| * breakpoint.h: Fix common/ includes. |
| * breakpoint.c: Fix common/ includes. |
| * ax.h: |
| (enum agent_op): Fix common/ includes. |
| * ax-general.c (struct aop_map): Fix common/ includes. |
| * ax-gdb.c: Fix common/ includes. |
| * auxv.c: Fix common/ includes. |
| * auto-load.c: Fix common/ includes. |
| * arm-tdep.c: Fix common/ includes. |
| * arch/riscv.c: Fix common/ includes. |
| * arch/ppc-linux-common.c: Fix common/ includes. |
| * arch/i386.c: Fix common/ includes. |
| * arch/arm.c: Fix common/ includes. |
| * arch/arm-linux.c: Fix common/ includes. |
| * arch/arm-get-next-pcs.c: Fix common/ includes. |
| * arch/amd64.c: Fix common/ includes. |
| * arch/aarch64.c: Fix common/ includes. |
| * arch/aarch64-insn.c: Fix common/ includes. |
| * arch-utils.c: Fix common/ includes. |
| * amd64-windows-tdep.c: Fix common/ includes. |
| * amd64-tdep.c: Fix common/ includes. |
| * amd64-sol2-tdep.c: Fix common/ includes. |
| * amd64-obsd-tdep.c: Fix common/ includes. |
| * amd64-nbsd-tdep.c: Fix common/ includes. |
| * amd64-linux-tdep.c: Fix common/ includes. |
| * amd64-linux-nat.c: Fix common/ includes. |
| * amd64-fbsd-tdep.c: Fix common/ includes. |
| * amd64-fbsd-nat.c: Fix common/ includes. |
| * amd64-dicos-tdep.c: Fix common/ includes. |
| * amd64-darwin-tdep.c: Fix common/ includes. |
| * agent.c: Fix common/ includes. |
| * ada-lang.h: Fix common/ includes. |
| * ada-lang.c: Fix common/ includes. |
| * aarch64-tdep.c: Fix common/ includes. |
| |
| 2019-01-25 Tom Tromey <tom@tromey.com> |
| |
| * common/create-version.sh: Use common/version.h. |
| |
| 2019-01-24 Pedro Alves <palves@redhat.com> |
| |
| * infrun.c (signal_stop, signal_print, signal_program) |
| (signal_catch, signal_pass): Now arrays instead of pointers. |
| (update_signals_program_target, do_target_resume) |
| (signal_catch_update, handle_command, _initialize_infrun): Adjust. |
| * linux-nat.c (linux_nat_target::pass_signals) |
| (linux_nat_target::create_inferior, linux_nat_target::attach): |
| Adjust. |
| * linux-nat.h (linux_nat_target::pass_signals): Adjust. |
| * nto-procfs.c (nto_procfs_target::pass_signals): Adjust. |
| * procfs.c (procfs_target::pass_signals): Adjust. |
| * record-full.c (record_full_target::resume): Adjust. |
| * remote.c (remote_target::pass_signals) |
| (remote_target::program_signals): Adjust. |
| * target-debug.h (target_debug_print_signals): Now takes a |
| gdb::array_view as parameter. Adjust. |
| * target.h (target_ops) <pass_signals, program_signals>: Replace |
| pointer and length parameters with gdb::array_view. |
| (target_pass_signals, target_program_signals): Likewise. |
| * target-delegates.c: Regenerate. |
| |
| 2019-01-24 Pedro Alves <palves@redhat.com> |
| |
| * common/forward-scope-exit.h |
| (forward_scope_exit::forward_scope_exit): Pass arguments to |
| m_bind_function directly, instead of creating a std::bind and |
| copying that. |
| |
| 2019-01-24 Alan Hayward <alan.hayward@arm.com> |
| |
| * aarch64-tdep.c (aapcs_is_vfp_call_or_return_candidate_1): Check |
| for static members. |
| (pass_in_v_vfp_candidate): Likewise. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * regcache.c (class regcache_invalidator): Remove. |
| (regcache::raw_write): Use make_scope_exit. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| |
| * ui-out.h (class ui_out_emit_type): Update comment. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| |
| * infrun.c (fetch_inferior_event): Update comment. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * infrun.c (reinstall_readline_callback_handler_cleanup): Remove |
| parameter. |
| (fetch_inferior_event): Use SCOPE_EXIT. |
| |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * infrun.c (disable_thread_events): Delete. |
| (stop_all_threads): Use SCOPE_EXIT. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * symfile.c: Include forward-scope-exit.h. |
| (clear_symtab_users_cleanup): Replace forward declaration with |
| a FORWARD_SCOPE_EXIT. |
| (syms_from_objfile_1): Use the forward_scope_exit and |
| gdb::optional instead of cleanup_function. |
| (reread_symbols): Use the forward_scope_exit instead of |
| cleanup_function. |
| (clear_symtab_users_cleanup): Remove function. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * linux-nat.c: Include scope-exit.h. |
| (cleanup_target_stop): Remove. |
| (linux_nat_target::static_tracepoint_markers_by_strid): Use |
| SCOPE_EXIT. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * infcall.c (cleanup_delete_std_terminate_breakpoint): Remove. |
| (call_function_by_hand_dummy): Use SCOPE_EXIT. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Andrew Burgess <andrew.burgess@embecosm.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * infrun.c (fetch_inferior_event): Use scope_exit. |
| * utils.h (make_bpstat_clear_actions_cleanup): Don't declare. |
| * top.c (execute_command): Use scope_exit. |
| * breakpoint.c (bpstat_do_actions): Use scope_exit. |
| * utils.c (do_bpstat_clear_actions_cleanup) |
| (make_bpstat_clear_actions_cleanup): Remove. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * infrun.c: Include "common/scope-exit.h" |
| (delete_just_stopped_threads_infrun_breakpoints_cleanup): Remove. |
| (wait_for_inferior): Use SCOPE_EXIT. |
| (fetch_inferior_event): Use scope_exit. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Pedro Alves <palves@redhat.com> |
| |
| * breakpoint.c (create_breakpoint): Remove cleanup. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| Andrew Burgess <andrew.burgess@embecosm.com> |
| Pedro Alves <palves@redhat.com> |
| |
| 2019-01-23 Pedro Alves <palves@redhat.com> |
| |
| * gdbarch-selftests.c (struct on_exit): Use SCOPE_EXIT. |
| |
| 2019-01-23 Pedro Alves <palves@redhat.com> |
| Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * gdbthread.h: Include "common/forward-scope-exit.h". |
| (scoped_finish_thread_state): Redefine custom class in terms of |
| forward_scope_exit. |
| |
| 2019-01-23 Pedro Alves <palves@redhat.com> |
| Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * common/forward-scope-exit.h: New file. |
| |
| 2019-01-23 Pedro Alves <palves@redhat.com> |
| Andrew Burgess <andrew.burgess@embecosm.com> |
| Tom Tromey <tom@tromey.com> |
| |
| * common/scope-exit.h: New file. |
| |
| 2019-01-23 Pedro Alves <palves@redhat.com> |
| |
| * common/preprocessor.h (ESC): Rename to ... |
| (ESC_PARENS): ... this. |
| * common/valid-expr.h (CHECK_VALID_EXPR_1, CHECK_VALID_EXPR_2) |
| (CHECK_VALID_EXPR_3, CHECK_VALID_EXPR_4): Adjust. |
| |
| 2019-01-23 Tom Tromey <tom@tromey.com> |
| |
| * language.h (class scoped_switch_to_sym_language_if_auto): |
| Initialize m_lang in both cases. |
| |
| 2019-01-23 Alan Hayward <alan.hayward@arm.com> |
| |
| * nat/aarch64-linux.c (aarch64_linux_new_thread): Replace XNEW |
| with XCNEW. |
| |
| 2019-01-22 Tom Tromey <tom@tromey.com> |
| |
| * corelow.c: Do not include sys/file.h. |
| |
| 2019-01-22 Tom Tromey <tom@tromey.com> |
| |
| * tui/tui-wingeneral.h: Include gdb_curses.h. |
| |
| 2019-01-22 Tom Tromey <tom@tromey.com> |
| |
| * source-cache.h (class source_cache) <get_source_lines, |
| get_plain_source_lines, extract_lines>: Rename "lines" parameter. |
| |
| 2019-01-22 Tom Tromey <tom@tromey.com> |
| |
| * remote-fileio.h (struct remote_target): Declare. |
| |
| 2019-01-22 Tom Tromey <tom@tromey.com> |
| |
| * python/py-arch.c: Do not include py-ref.h. |
| * python/py-bpevent.c: Do not include py-ref.h. |
| * python/py-cmd.c: Do not include py-ref.h. |
| * python/py-continueevent.c: Do not include py-ref.h. |
| * python/py-event.h: Do not include py-ref.h. |
| * python/py-evtregistry.c: Do not include py-ref.h. |
| * python/py-finishbreakpoint.c: Do not include py-ref.h. |
| * python/py-frame.c: Do not include py-ref.h. |
| * python/py-framefilter.c: Do not include py-ref.h. |
| * python/py-function.c: Do not include py-ref.h. |
| * python/py-infevents.c: Do not include py-ref.h. |
| * python/py-linetable.c: Do not include py-ref.h. |
| * python/py-objfile.c: Do not include py-ref.h. |
| * python/py-param.c: Do not include py-ref.h. |
| * python/py-prettyprint.c: Do not include py-ref.h. |
| * python/py-progspace.c: Do not include py-ref.h. |
| * python/py-symbol.c: Do not include py-ref.h. |
| * python/py-symtab.c: Do not include py-ref.h. |
| * python/py-type.c: Do not include py-ref.h. |
| * python/py-unwind.c: Do not include py-ref.h. |
| * python/py-utils.c: Do not include py-ref.h. |
| * python/py-value.c: Do not include py-ref.h. |
| * python/py-varobj.c: Do not include py-ref.h. |
| * python/py-xmethods.c: Do not include py-ref.h. |
| * python/python.c: Do not include py-ref.h. |
| * varobj.c: Do not include py-ref.h. |
| |
| 2019-01-22 Tom Tromey <tom@tromey.com> |
| |
| * objfiles.h (struct objfile_per_bfd_storage): Use "struct" |
| keyword for bcache. |
| |
| 2019-01-22 Tom Tromey <tom@tromey.com> |
| |
| * compile/compile-cplus-types.c: Remove a comment by #include. |
| |
| 2019-01-22 Tom Tromey <tom@tromey.com> |
| |
| * compile/gcc-c-plugin.h: Include compile-internal.h. |
| |
| 2019-01-22 Tom Tromey <tom@tromey.com> |
| |
| * stabsread.c (EXTERN): Do not define. |
| (symnum, next_symbol_text_func, processing_gcc_compilation) |
| (within_function, global_sym_chain, global_stabs) |
| (previous_stab_code, this_object_header_files) |
| (n_this_object_header_files) |
| (n_allocated_this_object_header_files): Define. |
| * stabsread.h (EXTERN): Never define. Use "extern". |
| |
| 2019-01-22 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * event-top.c (handle_line_of_input): use unique_xmalloc_ptr for |
| history_value. |
| |
| 2019-01-21 Tom Tromey <tom@tromey.com> |
| |
| * ui-out.c: Fix includes. |
| * tui/tui-source.c: Fix includes. |
| * target.c: Fix includes. |
| * remote.c: Fix includes. |
| * regcache.c: Fix includes. |
| * python/py-block.c: Fix includes. |
| * printcmd.c: Fix includes. |
| * or1k-tdep.c: Fix includes. |
| * mi/mi-main.c: Fix includes. |
| * m32r-tdep.c: Fix includes. |
| * csky-tdep.c: Fix includes. |
| * compile/compile-cplus-types.c: Fix includes. |
| * cli/cli-interp.c: Fix includes. |
| |
| 2019-01-21 Alan Hayward <alan.hayward@arm.com> |
| |
| * aarch64-tdep.c (aapcs_is_vfp_call_or_return_candidate_1): Check |
| for padding. |
| |
| 2019-01-16 Tom Tromey <tom@tromey.com> |
| |
| * objfiles.h (struct minimal_symbol_iterator): Rename. Move |
| earlier. |
| (struct objfile) <msymbols_range>: Move from top level. |
| <msymbols>: New method. |
| (class objfile_msymbols): Remove. |
| * symtab.c (default_collect_symbol_completion_matches_break_on): |
| Update. |
| * symmisc.c (dump_msymbols): Update. |
| * stabsread.c (scan_file_globals): Update. |
| * objc-lang.c (info_selectors_command, info_classes_command) |
| (find_methods): Update. |
| * minsyms.c (find_solib_trampoline_target): Update. |
| * hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Update. |
| * coffread.c (coff_symfile_read): Update. |
| * ada-lang.c (ada_lookup_simple_minsym) |
| (ada_collect_symbol_completion_matches): Update. |
| |
| 2019-01-16 Tom Tromey <tom@tromey.com> |
| |
| * objfiles.h (class objfile_msymbols) <iterator>: Change argument |
| type. Remove no-argument constructor. |
| <iterator::operator++>: Simplify. |
| <begin>: Update. |
| <end>: Use minimal_symbol_count. |
| |
| 2019-01-16 Tom Tromey <tom@tromey.com> |
| |
| * objfiles.h (struct objfile) <psymtabs>: New method. |
| (class objfile_psymtabs): Remove. |
| * psymtab.h (class psymtab_storage) <partial_symtab_range>: New |
| typedef. |
| <range>: New method. |
| (require_partial_symbols): Change return type. |
| * psymtab.c (require_partial_symbols) |
| (psym_expand_symtabs_matching): Update. |
| * mdebugread.c (parse_partial_symbols): Update. |
| * dbxread.c (dbx_end_psymtab): Update. |
| |
| 2019-01-15 Tom Tromey <tom@tromey.com> |
| |
| * symtab.c (lookup_objfile_from_block) |
| (lookup_symbol_in_objfile_symtabs) |
| (basic_lookup_transparent_type_1, find_pc_sect_compunit_symtab) |
| (find_line_symtab, info_sources_command) |
| (default_collect_symbol_completion_matches_break_on) |
| (make_source_files_completion_list): Update. |
| * symmisc.c (print_objfile_statistics, dump_objfile) |
| (maintenance_print_symbols, maintenance_info_symtabs) |
| (maintenance_check_symtabs, maintenance_info_line_tables): |
| Update. |
| * source.c (select_source_symtab) |
| (forget_cached_source_info_for_objfile): Update. |
| * objfiles.h (class objfile_compunits): Remove. |
| (struct objfile) <compunits_range>: New typedef. |
| (compunits): New method. |
| * objfiles.c (objfile_relocate1): Update. |
| * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update. |
| * maint.c (count_symtabs_and_blocks): Update. |
| * linespec.c (iterate_over_all_matching_symtabs): Update. |
| * cp-support.c (add_symbol_overload_list_qualified): Update. |
| * coffread.c (coff_symtab_read): Update. |
| * ada-lang.c (add_nonlocal_symbols) |
| (ada_collect_symbol_completion_matches) |
| (ada_add_global_exceptions): Update. |
| |
| 2019-01-15 Tom Tromey <tom@tromey.com> |
| |
| * progspace.h (program_space) <objfiles_safe_range>: New |
| typedef. |
| <objfiles_safe>: New method. |
| * objfiles.h (class all_objfiles_safe): Remove. |
| * objfiles.c (free_all_objfiles, objfile_purge_solibs): Update. |
| * jit.c (jit_inferior_exit_hook): Update. |
| |
| 2019-01-17 Tom Tromey <tom@tromey.com> |
| |
| * progspace.h (program_space) <objfiles_range>: New typedef. |
| <objfiles>: New method. |
| <objfiles_head>: Rename from objfiles. |
| (object_files): Update. |
| * guile/scm-progspace.c (gdbscm_progspace_objfiles): Update. |
| * guile/scm-pretty-print.c |
| (ppscm_find_pretty_printer_from_objfiles): Update. |
| * guile/scm-objfile.c (gdbscm_objfiles): Update. |
| * python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): |
| Update. |
| * python/py-progspace.c (pspy_get_objfiles): Update. |
| * python/py-prettyprint.c (find_pretty_printer_from_objfiles): |
| Update. |
| * python/py-objfile.c (objfpy_lookup_objfile_by_name) |
| (objfpy_lookup_objfile_by_build_id): Update. |
| * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update. |
| * windows-tdep.c (windows_iterate_over_objfiles_in_search_order): |
| Update. |
| * symtab.c (iterate_over_symtabs, matching_obj_sections) |
| (expand_symtab_containing_pc, lookup_objfile_from_block) |
| (lookup_static_symbol, basic_lookup_transparent_type) |
| (find_pc_sect_compunit_symtab, find_symbol_at_address) |
| (find_line_symtab, info_sources_command) |
| (default_collect_symbol_completion_matches_break_on) |
| (make_source_files_completion_list, find_main_name): Update. |
| * symmisc.c (print_symbol_bcache_statistics) |
| (print_objfile_statistics, maintenance_print_symbols) |
| (maintenance_print_msymbols, maintenance_print_objfiles) |
| (maintenance_info_symtabs, maintenance_check_symtabs) |
| (maintenance_expand_symtabs, maintenance_info_line_tables): |
| Update. |
| * symfile.c (remove_symbol_file_command, overlay_invalidate_all) |
| (find_pc_overlay, find_pc_mapped_section, list_overlays_command) |
| (map_overlay_command, unmap_overlay_command) |
| (simple_overlay_update, expand_symtabs_matching) |
| (map_symbol_filenames): Update. |
| * symfile-debug.c (set_debug_symfile): Update. |
| * spu-tdep.c (spu_overlay_update, spu_objfile_from_frame): |
| Update. |
| * source.c (select_source_symtab, forget_cached_source_info): |
| Update. |
| * solib.c (solib_read_symbols): Update. |
| * solib-spu.c (append_ocl_sos): Update. |
| * psymtab.c (maintenance_print_psymbols) |
| (maintenance_info_psymtabs, maintenance_check_psymtabs): Update. |
| * probe.c (parse_probes_in_pspace, find_probe_by_pc): Update. |
| * printcmd.c (info_symbol_command): Update. |
| * ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): |
| Update. |
| * objfiles.h (class all_objfiles): Remove. |
| * objfiles.c (have_partial_symbols, have_full_symbols) |
| (have_minimal_symbols, qsort_cmp, update_section_map) |
| (shared_objfile_contains_address_p) |
| (default_iterate_over_objfiles_in_search_order): Update. |
| * objc-lang.c (info_selectors_command, info_classes_command) |
| (find_methods): Update. |
| * minsyms.c (find_solib_trampoline_target): Update. |
| * maint.c (maintenance_info_sections) |
| (maintenance_translate_address, count_symtabs_and_blocks): |
| Update. |
| * main.c (captured_main_1): Update. |
| * linux-thread-db.c (try_thread_db_load_from_pdir) |
| (has_libpthread): Update. |
| * linespec.c (iterate_over_all_matching_symtabs) |
| (search_minsyms_for_name): Update. |
| * jit.c (jit_find_objf_with_entry_addr): Update. |
| * hppa-tdep.c (find_unwind_entry) |
| (hppa_lookup_stub_minimal_symbol): Update. |
| * gcore.c (gcore_create_callback, objfile_find_memory_regions): |
| Update. |
| * elfread.c (elf_gnu_ifunc_resolve_by_cache) |
| (elf_gnu_ifunc_resolve_by_got): Update. |
| * dwarf2-frame.c (dwarf2_frame_find_fde): Update. |
| * dwarf-index-write.c (save_gdb_index_command): Update. |
| * cp-support.c (add_symbol_overload_list_qualified): Update. |
| * breakpoint.c (create_overlay_event_breakpoint) |
| (create_longjmp_master_breakpoint) |
| (create_std_terminate_master_breakpoint) |
| (create_exception_master_breakpoint): Update. |
| * blockframe.c (find_pc_partial_function): Update. |
| * ada-lang.c (ada_lookup_simple_minsym, add_nonlocal_symbols) |
| (ada_collect_symbol_completion_matches) |
| (ada_add_global_exceptions): Update. |
| |
| 2019-01-17 Tom Tromey <tom@tromey.com> |
| |
| * solib-target.c (lm_info_target_p): Remove typedef. Don't |
| declare VEC. |
| (solib_target_parse_libraries): Change return type. |
| (library_list_start_segment, library_list_start_section) |
| (library_list_end_library, library_list_start_library); Update. |
| (solib_target_free_library_list): Remove. |
| (solib_target_parse_libraries): Remove cleanup. Change return |
| type. |
| (solib_target_current_sos): Update. |
| |
| 2019-01-17 Tom Tromey <tromey@bapiya> |
| |
| * valprint.c: Replace "the the" with "the". |
| * symtab.c: Replace "the the" with "the". |
| * solib.c: Replace "the the" with "the". |
| * solib-dsbt.c: Replace "the the" with "the". |
| * linespec.c: Replace "the the" with "the". |
| * dwarf2loc.h: Replace "the the" with "the". |
| * amd64-windows-tdep.c: Replace "the the" with "the". |
| * aarch64-tdep.c: Replace "the the" with "the". |
| |
| 2019-01-16 Keith Seitz <keiths@redhat.com> |
| |
| PR gdb/23773 |
| * dwarf2read.c (dwarf2_cu) <ancestor>: New field. |
| <builder>: Rename to .. |
| <m_builder>: ... this and make private. |
| (dwarf2_cu::get_builder): New method. Change all users of |
| `builder' to use this method. |
| (dwarf2_start_symtab): Move to ... |
| (dwarf2_cu::start_symtab): ... here. Update all callers |
| (setup_type_unit_groups): Move to ... |
| (dwarf2_cu::setup_type_unit_groups): ... here. Update all |
| callers. |
| (dwarf2_cu::reset_builder): New method. |
| (process_full_compunit, process_full_type_unit): Use |
| dwarf2_cu::reset_builder. |
| (follow_die_offset): Record the ancestor CU if it is different |
| from the followed DIE's CU. |
| (follow_die_sig_1): Likewise. |
| |
| 2019-01-15 Tom Tromey <tom@tromey.com> |
| |
| * remote.c (class remote_state) <buf>: Now a char_vector. |
| <buf_size>: Remove. |
| (remote_target::getpkt): Change type of buf. Remove sizeof_buf |
| parameter. |
| (remote_target::getpkt_or_notif_sane_1) |
| (remote_target::getpkt_sane) |
| (remote_target::getpkt_or_notif_sane): Likewise. |
| (class remote_target) <putpkt>: New overload. |
| (remote_target::read_frame): Change type of "buf_p". Remove |
| sizeof_p parameter. |
| (packet_ok): New overload. |
| (packet_check_result): New overload. |
| Update all uses. |
| |
| 2019-01-14 Tom Tromey <tom@tromey.com> |
| |
| * remote-notif.c (handle_notification, remote_notif_ack) |
| (remote_notif_parse): Make "buf" const. |
| * remote-notif.h (struct notif_client) <parse, ack>: Make "buf" |
| const. |
| (remote_notif_parse, remote_notif_ack, handle_notification): |
| Likewise. |
| * remote.c (remote_notif_stop_parse): Make "buf" const. |
| (remote_target::remote_parse_stop_reply): Make "buf" const. |
| (remote_notif_stop_ack): Make "buf" const. |
| |
| 2019-01-14 Tom Tromey <tom@tromey.com> |
| |
| * remote.c (remote_console_output): Make parameter const. |
| |
| 2019-01-14 Tom Tromey <tom@tromey.com> |
| |
| * target-debug.h (target_debug_print_signals): Constify. |
| * nto-procfs.c (nto_procfs_target::pass_signals): Update. |
| * procfs.c (procfs_target::pass_signals): Update. |
| * linux-nat.c (linux_nat_target::pass_signals): Update. |
| * linux-nat.h (class linux_nat_target) <pass_signals>: Update. |
| * target-delegates.c: Rebuild. |
| * remote.c (remote_target::program_signals): Update. |
| (remote_target::pass_signals): Update. |
| * target.c (target_pass_signals): Constify argument. |
| (target_program_signals): Likewise. |
| * target.h (struct target_ops) <pass_signals, program_signals>: |
| Constify argument. |
| (target_pass_signals, target_program_signals): Constify argument. |
| |
| 2019-01-14 Tom Tromey <tom@tromey.com> |
| |
| PR tui/28819: |
| * tui/tui-io.c (gdb_wgetch): Print \r when needed. |
| |
| 2019-01-14 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> |
| |
| * ppc-tdep.h (struct gdbarch_tdep) <ppc_v0_alias_regnum>: New |
| field. |
| * rs6000-tdep.c: Include reggroups.h. |
| (IS_V_ALIAS_PSEUDOREG): Define. |
| (rs6000_register_name): Return names for the "vX" aliases. |
| (rs6000_pseudo_register_type): Return type for the "vX" aliases. |
| (rs6000_pseudo_register_reggroup_p): Restore. Handle "vX" |
| aliases. Call default_register_reggroup_p for all other |
| pseudo-registers. |
| (v_alias_pseudo_register_read, v_alias_pseudo_register_write): |
| New functions. |
| (rs6000_pseudo_register_read, rs6000_pseudo_register_write): |
| Handle "vX" aliases. |
| (v_alias_pseudo_register_collect): New function. |
| (rs6000_ax_pseudo_register_collect): Handle "vX" aliases. |
| (rs6000_gdbarch_init): Initialize "vX" aliases as |
| pseudo-registers. Restore registration of |
| rs6000_pseudo_register_reggroup_p with |
| set_tdesc_pseudo_register_reggroup_p. |
| |
| 2019-01-13 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * xtensa-linux-tdep.c (xtensa_linux_init_abi): Update |
| tdep->num_pseudo_regs. Add calls to set_gdbarch_num_regs and |
| set_gdbarch_num_pseudo_regs. |
| |
| 2019-01-12 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * cli/cli-style.h (class cli_style_option): <add_setshow_commands> |
| Remove arg prefixname, add do_set and do_show. |
| Add member functions set_list and show_list. |
| * cli/cli-style.c (class cli_style_option): Update accordingly. |
| (style_set_list): Move to file scope. |
| (style_show_list): Likewise. |
| (set_style): Call help_list. |
| (show_style): Call cmd_show_list. |
| (_initialize_cli_style): New macro STYLE_ADD_SETSHOW_COMMANDS. |
| Update to use the new macro. |
| |
| 2019-10-12 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (_initialize_ada_language): Expand the help text |
| for the "catch exception" command. |
| |
| 2019-01-12 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * symtab.c (matching_obj_sections): Initialize obj, |
| declare it closer to its usage. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * thread-iter.h (inf_threads_iterator): Use next_iterator. |
| (basic_inf_threads_range): Remove. |
| (inf_threads_range, inf_non_exited_threads_range) |
| (safe_inf_threads_range): Use next_adapter. |
| |
| 2019-01-10 Keith Seitz <keiths@redhat.com> |
| |
| PR gdb/23712 |
| PR symtab/23010 |
| * dwarf2read.c (dw2_add_symbol_to_list): Remove. |
| (fixup_go_packaging, new_symbol): Use add_symbol_to_list. |
| |
| 2019-01-10 Keith Seitz <keiths@redhat.com> |
| |
| PR gdb/23712 |
| PR symtab/23010 |
| * dictionary.c (pending_to_vector): Remove. |
| (dict_create_hashed_1, dict_create_linear_1, dict_add_pending_1): |
| Remove _1 suffix, replacing functions of the same name. Update |
| all callers. |
| (dict_create_hashed, dict_create_hashed_expandable) |
| (dict_create_linear, dict_create_linear_expandable, dict_free) |
| (dict_add_symbol, dict_add_pending, dict_size, dict_empty): |
| Make functions static. |
| |
| 2019-01-10 Keith Seitz <keiths@redhat.com> |
| |
| PR gdb/23712 |
| PR symtab/23010 |
| * dictionary.h (struct dictionary): Replace declaration with |
| multidictionary. |
| (dict_create_hashed, dict_create_hashed_expandable) |
| (dict_create_linear, dict_create_linear_expandable) |
| (dict_free, dict_add_symbol, dict_add_pending, dict_empty) |
| (dict_iterator_first, dict_iterator_next, dict_iter_match_first) |
| (dict_iter_match_next, dict_size): Rename to "mdict_" versions |
| taking multidictionary argument. |
| [ALL_DICT_SYMBOLS]: Update for multidictionary. |
| * block.h (struct block) <dict>: Change to multidictionary |
| and rename `multidict'. |
| * block.c, buildsym.c, jit.c, mdebugread.c, objfiles.c, |
| symmisc.c: Update all dictionary references to multidictionary. |
| |
| 2019-01-10 Keith Seitz <keiths@redhat.com> |
| |
| PR gdb/23712 |
| PR symtab/23010 |
| * dictionary.c: Include unordered_map. |
| (pending_to_vector): New function. |
| (dict_create_hashed_1, dict_create_linear_1, dict_add_pending_1): |
| Rewrite the non-"_1" functions to take vector instead |
| of linked list. |
| (dict_create_hashed, dict_create_linear, dict_add_pending): Use the |
| "new" _1 versions of the same name. |
| (multidictionary): Define. |
| (std::hash<enum language): New definition. |
| (collate_pending_symbols_by_language, mdict_create_hashed) |
| (mdict_create_hashed_expandable, mdict_create_linear) |
| (mdict_create_linear_expandable, mdict_free) |
| (find_language_dictionary, create_new_language_dictionary) |
| (mdict_add_symbol, mdict_add_pending, mdict_iterator_first) |
| (mdict_iterator_next, mdict_iter_match_first, mdict_iter_match_next) |
| (mdict_size, mdict_empty): New functions. |
| * dictionary.h (mdict_iterator): Define. |
| |
| 2019-01-10 Pedro Alves <palves@redhat.com> |
| |
| * breakpoint.c (read_uploaded_action) |
| (create_tracepoint_from_upload): Adjust to use |
| gdb::unique_xmalloc_ptr. |
| * ctf.c (ctf_write_uploaded_tp): |
| (SET_ARRAY_FIELD): Use emplace_back. |
| (SET_STRING_FIELD): Adjust to use gdb::unique_xmalloc_ptr. |
| * tracefile-tfile.c (tfile_write_uploaded_tp): |
| * tracepoint.c (parse_tracepoint_definition): Adjust to use |
| gdb::unique_xmalloc_ptr. |
| * tracepoint.h (struct uploaded_tp) <cond, actions, step_actions, |
| at_string, cond_string, cmd_strings>: Replace char pointers |
| with gdb::unique_xmalloc_ptr. |
| |
| 2019-01-10 Pedro Alves <palves@redhat.com> |
| |
| * solib-target.c (library_list_start_library): Don't xstrdup name. |
| |
| 2019-01-10 Pedro Alves <palves@redhat.com> |
| |
| * mdebugread.c (parse_partial_symbols): Use |
| gdb::unique_xmalloc_ptr to manage heap-allocated 'stabsstring'. |
| |
| 2019-01-10 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * linux-fork.c (scoped_switch_fork_info) |
| <~scoped_switch_fork_info>: Fix incorrect variable name. |
| |
| 2019-01-10 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * linux-fork.c (scoped_switch_fork_info) |
| <scoped_switch_fork_info>: Make explicit. |
| <~scoped_switch_fork_info>: Wrap core in TRY/CATCH. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * objfiles.h (objfile::reset_psymtabs): Update. |
| * objfiles.c (objfile::objfile): Update. |
| * psymtab.h (psymtab_storage::obstack): Update. |
| (psymtab_storage::m_obstack): Use gdb::optional. |
| (class psymtab_storage): Update comment. Remove objfile |
| parameter. |
| * psymtab.c (psymtab_storage::psymtab_storage): Update. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * psymtab.h (psymtab_storage::allocate_psymtab): New method. |
| <free_psymtabs>: Now private. |
| * psymtab.c (psymtab_storage::allocate_psymtab): Implement. |
| (allocate_psymtab): Use new method. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * xcoffread.c (xcoff_end_psymtab): Use allocate_dependencies. |
| * psymtab.h (psymtab_storage::allocate_dependencies): New method. |
| * mdebugread.c (parse_partial_symbols): Use |
| allocate_dependencies. |
| * dwarf2read.c (dwarf2_create_include_psymtab): Use |
| allocate_dependencies. |
| (process_psymtab_comp_unit_reader) |
| (build_type_psymtab_dependencies): Likewise. |
| * dbxread.c (dbx_end_psymtab): Use allocate_dependencies. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * psymtab.c (add_psymbol_to_bcache): Pass psymtab obstack to |
| PSYMBOL_SET_LANGUAGE. |
| (allocate_psymtab): Allocate psymtab on the psymtab obstack. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * psymtab.h (psymtab_storage::obstack): New method. |
| <m_obstack>: Rename from obstack; now private. |
| * psymtab.c (psymtab_storage): Update. |
| * dwarf2read.c (create_addrmap_from_index) |
| (create_addrmap_from_aranges, dwarf2_build_psymtabs_hard): |
| Update. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * symfile.c (reread_symbols): Call objfile->reset_psymtabs. |
| * objfiles.h (objfile::reset_psymtabs): New method. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * symmisc.c (print_symbol_bcache_statistics): Update. |
| (print_objfile_statistics): Update. |
| * symfile.c (reread_symbols): Update. |
| * psymtab.h (class psymtab_storage): New. |
| * psymtab.c (psymtab_storage): New constructor. |
| (~psymtab_storage): New destructor. |
| (require_partial_symbols): Update. |
| (ALL_OBJFILE_PSYMTABS_REQUIRED): Rewrite. |
| (find_pc_sect_psymtab, find_pc_sect_psymbol) |
| (match_partial_symbol, lookup_partial_symbol, dump_psymtab) |
| (psym_dump, recursively_search_psymtabs, psym_has_symbols) |
| (psym_find_compunit_symtab_by_address, sort_pst_symbols) |
| (start_psymtab_common, end_psymtab_common) |
| (add_psymbol_to_bcache, add_psymbol_to_list, init_psymbol_list) |
| (allocate_psymtab): Update. |
| (psymtab_storage::discard_psymtab): Rename from discard_psymtab. |
| Update. |
| (dump_psymtab_addrmap, maintenance_print_psymbols) |
| (maintenance_check_psymtabs): Update. |
| (class objfile_psymtabs): Move to objfiles.h. |
| * psympriv.h (discard_psymtab): Now inline. |
| (psymtab_discarder::psymtab_discarder): Update. |
| (psymtab_discarder::~psymtab_discarder): Update. |
| (ALL_OBJFILE_PSYMTABS): Rewrite. |
| * objfiles.h (struct objfile) <psymtabs, psymtabs_addrmap, |
| free_psymtabs, psymbol_cache, global_psymbols, static_psymbols>: |
| Remove fields. |
| <partial_symtabs>: New field. |
| (class objfile_psymtabs): Move from psymtab.h. Update. |
| * objfiles.c (objfile::objfile): Initialize partial_symtabs, not |
| psymbol_cache. |
| (objfile::~objfile): Don't destroy psymbol_cache. |
| * mdebugread.c (parse_partial_symbols): Update. |
| * dwarf2read.c (create_addrmap_from_index) |
| (create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab) |
| (process_psymtab_comp_unit_reader, dwarf2_build_psymtabs_hard) |
| (add_partial_subprogram, dwarf2_ranges_read): Update. |
| * dwarf-index-write.c (write_address_map) |
| (write_one_signatured_type, recursively_write_psymbols) |
| (class debug_names, class debug_names, write_psymtabs_to_index): |
| Update. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * symtab.h (SYMBOL_SET_NAMES): Update. |
| (symbol_set_names): Update. |
| (MSYMBOL_SET_NAMES): Update. |
| * symtab.c (symbol_set_names): Change argument to be an |
| objfile_per_bfd_storage. |
| * psymtab.c (add_psymbol_to_bcache): Update. |
| * psympriv.h (PSYMBOL_SET_NAMES): Take per_bfd argument. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * symtab.c (create_demangled_names_hash): Change argument to be an |
| objfile_per_bfd_storage. |
| (symbol_set_names): Update. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * xcoffread.c (xcoff_initial_scan): Unconditionally call |
| init_psymbol_list. |
| * psymtab.c (init_psymbol_list): Do nothing if already called. |
| * psympriv.h (init_psymbol_list): Add comment. |
| * dwarf2read.c (dwarf2_build_psymtabs): Unconditionally call |
| init_psymbol_list. |
| * dbxread.c (dbx_symfile_read): Unconditionally call |
| init_psymbol_list. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * xcoffread.c (scan_xcoff_symtab): Update. |
| * psymtab.c (add_psymbol_to_list): Replace "list" parameter with |
| "where". |
| * mdebugread.c (parse_partial_symbols) |
| (handle_psymbol_enumerators): Update. |
| * dwarf2read.c (add_partial_symbol, load_partial_dies): Update. |
| * dbxread.c (read_dbx_symtab): Update. |
| * psympriv.h (psymbol_placement): New enum. |
| (add_psymbol_to_list): Update. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * xcoffread.c (xcoff_start_psymtab): Remove global_psymbols and |
| static_psymbols parameters. |
| (scan_xcoff_symtab): Update. |
| * psymtab.c (start_psymtab_common): Remove global_psymbols and |
| static_psymbols parameters. |
| * psympriv.h (start_psymtab_common): Update. |
| * mdebugread.c (parse_partial_symbols): Update. |
| * dwarf2read.c (create_partial_symtab): Update. |
| * dbxread.c (read_dbx_symtab): Update. |
| (start_psymtab): Remove global_psymbols and static_psymbols |
| parameters. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * xcoffread.c (xcoff_end_psymtab): Remove some initializations. |
| * psymtab.c (allocate_psymtab): Add comment. |
| * psympriv.h (allocate_psymtab): Add comment. |
| * dwarf2read.c (dwarf2_create_include_psymtab): Remove some |
| initializations. |
| * dbxread.c (dbx_end_psymtab): Remove some initializations. |
| |
| 2019-01-10 Tom Tromey <tom@tromey.com> |
| |
| * symfile.h (mdebug_build_psymtabs, elfmdebug_build_psymtabs): |
| Don't declare. |
| * mipsread.c: Include mdebugread.h. |
| * mdebugread.h (mdebug_build_psymtabs, elfmdebug_build_psymtabs): |
| Declare. |
| * elfread.c: Include mdebugread.h. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * dbxread.c (dbx_end_psymtab): Use objfile_psymtabs. |
| * mdebugread.c (parse_partial_symbols): Use objfile_psymtabs. |
| * psymtab.c (ALL_OBJFILE_PSYMTABS_REQUIRED): Remove. |
| (psym_map_symtabs_matching_filename, find_pc_sect_psymtab) |
| (psym_lookup_symbol, psym_find_last_source_symtab) |
| (psym_forget_cached_source_info, psym_print_stats) |
| (psym_expand_symtabs_for_function, psym_expand_all_symtabs) |
| (psym_expand_symtabs_with_fullname, psym_map_symbol_filenames) |
| (psym_map_matching_symbols, psym_expand_symtabs_matching) |
| (psym_find_compunit_symtab_by_address) |
| (maintenance_print_psymbols, maintenance_info_psymtabs) |
| (maintenance_check_psymtabs): Use ranged for. |
| * psymtab.h (class objfile_psymtabs): New. |
| (require_partial_symbols): Return objfile_psymtabs. |
| * psympriv.h (ALL_OBJFILE_PSYMTABS): Remove. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * symfile.c (overlay_invalidate_all, find_pc_overlay) |
| (find_pc_mapped_section, list_overlays_command) |
| (map_overlay_command, unmap_overlay_command) |
| (simple_overlay_update): Use all_objfiles. |
| * spu-tdep.c (spu_overlay_update): Use all_objfiles. |
| * printcmd.c (info_symbol_command): Use all_objfiles. |
| * objfiles.h (ALL_OBJSECTIONS): Remove. |
| * maint.c (maintenance_translate_address): Use all_objfiles. |
| * gcore.c (gcore_create_callback): Use all_objfiles. |
| (objfile_find_memory_regions): Likewise. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * symtab.c (find_line_symtab, info_sources_command) |
| (make_source_files_completion_list): Use objfile_compunits. |
| * source.c (select_source_symtab): Use objfile_compunits. |
| * objfiles.h (struct objfile): Update comment. |
| (ALL_OBJFILES): Remove. |
| (ALL_FILETABS): Remove. |
| * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Use |
| objfile_compunits. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * symmisc.c (print_objfile_statistics, dump_objfile) |
| (maintenance_print_symbols): Use compunit_filetabs. |
| * source.c (forget_cached_source_info_for_objfile): Use |
| compunit_filetabs. |
| * objfiles.h (ALL_OBJFILE_FILETABS): Remove. |
| (ALL_FILETABS): Use compunit_filetabs. |
| * objfiles.c (objfile_relocate1): Use compunit_filetabs. |
| * coffread.c (coff_symtab_read): Use compunit_filetabs. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * symtab.h (ALL_COMPUNIT_FILETABS): Remove. |
| (compunit_filetabs): New. |
| * symtab.c (iterate_over_some_symtabs, find_pc_sect_line): Use |
| compunit_filetabs. |
| (info_sources_command, make_source_files_completion_list): Remove |
| declaration. |
| * symmisc.c (print_objfile_statistics, dump_objfile) |
| (maintenance_print_symbols): Remove declaration. |
| (maintenance_info_symtabs): Use compunit_filetabs. |
| (maintenance_info_line_tables): Likewise. |
| * source.c (select_source_symtab): Change local variable name. |
| (forget_cached_source_info_for_objfile): Remove declaration. |
| * objfiles.h (ALL_OBJFILE_FILETABS): Use compunit_filetabs. |
| * objfiles.c (objfile_relocate1): Remove declaration. |
| * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove |
| declaration. |
| * maint.c (count_symtabs_and_blocks): Use compunit_filetabs. |
| * coffread.c (coff_symtab_read): Remove declaration. |
| * buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use |
| compunit_filetabs. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * symtab.c (lookup_objfile_from_block) |
| (find_pc_sect_compunit_symtab, search_symbols) |
| (default_collect_symbol_completion_matches_break_on): Use |
| objfile_compunits. |
| * objfiles.h (ALL_COMPUNITS): Remove. |
| * maint.c (count_symtabs_and_blocks): Use objfile_compunits. |
| * cp-support.c (add_symbol_overload_list_qualified): Use |
| objfile_compunits. |
| * ada-lang.c (ada_collect_symbol_completion_matches) |
| (ada_add_global_exceptions): Use objfile_compunits. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * source.c (select_source_symtab) |
| (forget_cached_source_info_for_objfile): Remove declaration. |
| * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove |
| declaration. |
| * maint.c (count_symtabs_and_blocks): Remove declaration. |
| * cp-support.c (add_symbol_overload_list_qualified): Remove |
| declaration. |
| * coffread.c (coff_symtab_read): Remove declaration. |
| * symtab.c (lookup_symbol_in_objfile_symtabs) |
| (basic_lookup_transparent_type_1): Use objfile_compunits. |
| (lookup_objfile_from_block, find_pc_sect_compunit_symtab) |
| (info_sources_command, search_symbols) |
| (default_collect_symbol_completion_matches_break_on) |
| (make_source_files_completion_list): Remove declaration. |
| * ada-lang.c (add_nonlocal_symbols): Use objfile_compunits. |
| (ada_collect_symbol_completion_matches) |
| (ada_add_global_exceptions): Remove declaration. |
| * linespec.c (iterate_over_all_matching_symtabs): Use |
| objfile_compunits. |
| * objfiles.h (ALL_OBJFILE_COMPUNITS): Remove. |
| (class objfile_compunits): New. |
| (ALL_COMPUNITS): Use objfile_compunits. |
| * symmisc.c (print_objfile_statistics, maintenance_info_symtabs) |
| (maintenance_check_symtabs, maintenance_info_line_tables): Use |
| objfile_compunits. |
| * objfiles.c (objfile_relocate1): Use objfile_compunits. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * symtab.c (search_symbols) |
| (default_collect_symbol_completion_matches_break_on): Use |
| objfile_msymbols. |
| * ada-lang.c (ada_lookup_simple_minsym) |
| (ada_collect_symbol_completion_matches): Use objfile_msymbols. |
| * minsyms.c (find_solib_trampoline_target): Use objfile_msymbols. |
| * hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Use |
| objfile_msymbols. |
| * coffread.c (coff_symfile_read): Use objfile_msymbols. |
| * symmisc.c (dump_msymbols): Use objfile_msymbols. |
| * objc-lang.c (find_methods): Use objfile_msymbols. |
| (info_selectors_command, info_classes_command): Likewise. |
| * stabsread.c (scan_file_globals): Use objfile_msymbols. |
| * objfiles.h (class objfile_msymbols): New. |
| (ALL_OBJFILE_MSYMBOLS): Remove. |
| (ALL_MSYMBOLS): Remove. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * common/next-iterator.h (next_adapter): Add Iterator template |
| parameter. |
| * objfiles.h (ALL_OBJFILES_SAFE): Remove. |
| (class all_objfiles_safe): New. |
| * jit.c (jit_inferior_exit_hook): Use all_objfiles_safe. |
| * objfiles.c (put_objfile_before): Update comment. |
| (add_separate_debug_objfile): Likewise. |
| (free_all_objfiles): Use all_objfiles_safe. |
| (objfile_purge_solibs): Likewise. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * symtab.c (iterate_over_symtabs, matching_obj_sections) |
| (expand_symtab_containing_pc, lookup_static_symbol) |
| (basic_lookup_transparent_type, find_pc_sect_compunit_symtab) |
| (find_symbol_at_address, find_line_symtab, find_main_name): Use |
| all_objfiles. |
| * probe.c (find_probe_by_pc, collect_probes): Use all_objfiles. |
| * breakpoint.c (create_overlay_event_breakpoint) |
| (create_longjmp_master_breakpoint) |
| (create_std_terminate_master_breakpoint) |
| (create_exception_master_breakpoint): Use all_objfiles. |
| * linux-thread-db.c (try_thread_db_load_from_pdir) |
| (has_libpthread): Use all_objfiles. |
| * ada-lang.c (add_nonlocal_symbols): Use all_objfiles. |
| * linespec.c (iterate_over_all_matching_symtabs) |
| (search_minsyms_for_name): Use all_objfiles. |
| * maint.c (maintenance_info_sections): Use all_objfiles. |
| * main.c (captured_main_1): Use all_objfiles. |
| * spu-tdep.c (spu_objfile_from_frame): Use all_objfiles. |
| * guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles. |
| * guile/scm-pretty-print.c |
| (ppscm_find_pretty_printer_from_objfiles): Use all_objfiles. |
| * solib-spu.c (append_ocl_sos): Use all_objfiles. |
| * symmisc.c (maintenance_print_symbols): Use all_objfiles. |
| (maintenance_print_msymbols): Use all_objfiles. |
| * source.c (select_source_symtab): Use all_objfiles. |
| * jit.c (jit_find_objf_with_entry_addr): Use all_objfiles. |
| * symfile.c (remove_symbol_file_command) |
| (expand_symtabs_matching, map_symbol_filenames): Use |
| all_objfiles. |
| * ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use |
| all_objfiles. |
| * dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles. |
| * objc-lang.c (find_methods): Use all_objfiles. |
| * objfiles.c (have_partial_symbols, have_full_symbols) |
| (have_minimal_symbols, qsort_cmp) |
| (default_iterate_over_objfiles_in_search_order): Use |
| all_objfiles. |
| * hppa-tdep.c (find_unwind_entry): Use all_objfiles. |
| * psymtab.c (maintenance_print_psymbols): Use all_objfiles. |
| (maintenance_check_psymtabs): Use all_objfiles. |
| (ALL_PSYMTABS): Remove. |
| * compile/compile-object-run.c (do_module_cleanup): Use |
| all_objfiles. |
| * blockframe.c (find_pc_partial_function): Use all_objfiles. |
| * cp-support.c (add_symbol_overload_list_qualified): Use |
| all_objfiles. |
| * windows-tdep.c (windows_iterate_over_objfiles_in_search_order): |
| Use all_objfiles. |
| * dwarf-index-write.c (save_gdb_index_command): Use all_objfiles. |
| * python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use |
| all_objfiles. |
| * python/py-objfile.c (objfpy_lookup_objfile_by_name) |
| (objfpy_lookup_objfile_by_build_id): Use all_objfiles. |
| * python/py-prettyprint.c (find_pretty_printer_from_objfiles): |
| Uses all_objfiles. |
| * solib.c (solib_read_symbols): Use all_objfiles |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * probe.c (parse_probes_in_pspace): Use all_objfiles. |
| * guile/scm-progspace.c (gdbscm_progspace_objfiles): Use |
| all_objfiles. |
| * objfiles.h (ALL_PSPACE_OBJFILES): Remove. |
| * symmisc.c (print_symbol_bcache_statistics) |
| (print_objfile_statistics, maintenance_print_objfiles) |
| (maintenance_info_symtabs, maintenance_check_symtabs) |
| (maintenance_expand_symtabs, maintenance_info_line_tables): Use |
| all_objfiles. |
| * source.c (forget_cached_source_info): Use all_objfiles. |
| * symfile-debug.c (set_debug_symfile): Use all_objfiles. |
| * elfread.c (elf_gnu_ifunc_resolve_by_cache) |
| (elf_gnu_ifunc_resolve_by_got): Use all_objfiles. |
| * objfiles.c (update_section_map): Use all_objfiles. |
| (shared_objfile_contains_address_p): Likewise. |
| * psymtab.c (maintenance_info_psymtabs): Use all_objfiles. |
| * python/py-progspace.c (pspy_get_objfiles): Use all_objfiles. |
| |
| 2019-01-09 Tom Tromey <tom@tromey.com> |
| |
| * common/next-iterator.h: New file. |
| * objfiles.h (class all_objfiles): New. |
| (struct objfile_iterator): New. |
| |
| 2019-01-09 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * NEWS: Move the description of the changed "frame", "select-frame", |
| and "info frame" commands to the Changed commands section. |
| |
| 2019-01-09 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * gdbtypes.c (check_stub_method_group): Remove handling of old |
| mangling schemes. |
| * linespec.c (find_methods): Likewise. |
| * stabsread.c (read_member_functions): Likewise. |
| * valops.c (search_struct_method): Likewise. |
| (value_struct_elt_for_reference): Likewise. |
| * NEWS: Mention this change. |
| |
| 2019-01-09 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * cli/cli-cmds.c (list_command): Pass a source_lines_range to |
| print_source_lines. |
| * source.c (print_source_lines_base): Update line number check. |
| (print_source_lines): New function. |
| (source_lines_range::source_lines_range): New function. |
| * source.h (class source_lines_range): New class. |
| (print_source_lines): New declaration. |
| |
| 2019-01-09 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * linespec.c (linespec_state_destructor): Free self->canonical_names. |
| |
| 2019-01-08 Tom Tromey <tom@tromey.com> |
| Simon Marchi <simon.marchi@ericsson.com> |
| |
| PR gdb/24060 |
| * ada-exp.y (DOLLAR_VARIABLE): Rename from SPECIAL_VARIABLE. |
| * ada-lex.l (DOLLAR_VARIABLE): Likewise. |
| * c-exp.y (DOLLAR_VARIABLE): Rename from VARIABLE. |
| * f-exp.y (DOLLAR_VARIABLE): Likewise. |
| * m2-exp.y (DOLLAR_VARIABLE): Rename from INTERNAL_VAR. |
| * p-exp.y (DOLLAR_VARIABLE): Rename from VARIABLE. |
| |
| 2019-01-08 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * source.c (select_source_symtab): Move header comment to |
| declaration in source.h. |
| (forget_cached_source_info_for_objfile): Likewise. |
| (forget_cached_source_info): Likewise. |
| (identify_source_line): Likewise. |
| * source.h (identify_source_line): Move declaration from symtab.h |
| and add comment from source.c |
| (print_source_lines): Likewise. |
| (forget_cached_source_info_for_objfile): Likewise. |
| (forget_cached_source_info): Likewise. |
| (select_source_symtab): Likewise. |
| (enum print_source_lines_flag): Move definition from symtab.h. |
| * symtab.h (identify_source_line): Move declaration to source.h. |
| (print_source_lines): Likewise. |
| (forget_cached_source_info_for_objfile): Likewise. |
| (forget_cached_source_info): Likewise. |
| (select_source_symtab): Likewise. |
| (enum print_source_lines_flag): Move definition to source.h. |
| * tui/tui-hooks.c: Add 'source.h' include. |
| |
| 2019-01-08 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * source.c (print_source_lines_base): Handle requests to print |
| reverse line number sequences, and guard against empty lines |
| string. |
| |
| 2019-01-08 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * source.c (print_source_lines_base): Fix skip of '\r' if next |
| character is '\n'. |
| |
| 2019-01-06 Tom Tromey <tom@tromey.com> |
| |
| * c-exp.y (struct c_parse_state) <macro_original_text, |
| expansion_obstack>: New member. |
| (macro_original_text, expansion_obstack): Remove globals. |
| (scan_macro_expansion, scanning_macro_expansion) |
| (finished_macro_expansion): Update. |
| (scan_macro_cleanup): Remove. |
| (yylex, c_parse): Update. |
| |
| 2019-01-06 Tom Tromey <tom@tromey.com> |
| |
| * c-exp.y (struct c_parse_state) <strings>: New member. |
| (operator_stoken): Update. |
| |
| 2019-01-06 Tom Tromey <tom@tromey.com> |
| |
| * parser-defs.h (type_ptr): Remove typedef. Don't declare VEC. |
| (union type_stack_elt) <typelist_val>: Now a pointer to |
| std::vector. |
| (type_stack_cleanup): Don't declare. |
| (push_typelist): Update. |
| * parse.c (pop_typelist): Return a std::vector. |
| (push_typelist): Take a std::vector. |
| (follow_types): Update. Do not free args. |
| (type_stack_cleanup): Remove. |
| * c-exp.y (struct c_parse_state): New. |
| (cpstate): New global. |
| (type_aggregate_p, exp, ptr_operator, parameter_typelist) |
| (nonempty_typelist): Update. |
| (func_mod): Create a new vector. |
| (c_parse): Create a c_parse_state. |
| (check_parameter_typelist): Do not delete params. |
| (function_method): Update. Do not delete type_list. |
| |
| 2019-01-06 Tom Tromey <tom@tromey.com> |
| |
| PR gdb/28155: |
| * python/py-finishbreakpoint.c (bpfinishpy_init): Use |
| check_typedef. |
| * infcmd.c (finish_command_fsm_should_stop): Use check_typedef. |
| (print_return_value): Likewise. |
| |
| 2019-01-05 Tom Tromey <tom@tromey.com> |
| |
| * contrib/cleanup_check.py: Remove. |
| * contrib/gcc-with-excheck: Remove. |
| * contrib/exsummary.py: Remove. |
| * contrib/excheck.py: Remove. |
| |
| 2019-01-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * thread.c (delete_thread_1): Add gdb_assert that THR is not |
| NULL. Initialize tpprev to NULL instead of assigning it |
| to NULL on the next statement. |
| * windows-nat.c (windows_delete_thread): Remove check for |
| main_thread_id before printing thread exit notifications. |
| (get_windows_debug_event) <EXIT_THREAD_DEBUG_EVENT>: |
| Remove thread ID check against main_thread_id. |
| <CREATE_PROCESS_DEBUG_EVENT>: Remove call to |
| windows_delete_thread. |
| <EXIT_PROCESS_DEBUG_EVENT>: Add call to windows_delete_thread. |
| |
| 2019-01-04 Tom Tromey <tom@tromey.com> |
| |
| * compile/compile.c (_initialize_compile): Use upper case for |
| metasyntactic variables. |
| * symmisc.c (_initialize_symmisc): Use upper case for |
| metasyntactic variables. |
| * psymtab.c (_initialize_psymtab): Use upper case for |
| metasyntactic variables. |
| * demangle.c (demangle_command): Use upper case for metasyntactic |
| variables. |
| (_initialize_demangler): Likewise. |
| * ax-gdb.c (_initialize_ax_gdb): Use upper case for metasyntactic |
| variables. |
| |
| 2019-01-03 Tom Tromey <tom@tromey.com> |
| |
| * tui/tui-source.c (tui_set_source_content): Use xstrdup. |
| |
| 2019-01-03 Tom Tromey <tom@tromey.com> |
| |
| * python/py-symtab.c (salpy_str): Update. |
| (struct salpy_sal_object) <symtab>: Now a PyObject. |
| (salpy_dealloc): Update. |
| (del_objfile_sal): Use gdbpy_ref. |
| |
| 2019-01-03 Tom Tromey <tom@tromey.com> |
| |
| * python/py-type.c (convert_field): Use new_reference. Return |
| gdbpy_ref. |
| (make_fielditem): Return gdbpy_ref. |
| (typy_fields): Update. |
| (typy_getitem): Update. |
| (field_name): Return gdbpy_ref. Use new_reference. |
| (typy_iterator_iternext): Update. |
| |
| 2019-01-03 Tom Tromey <tom@tromey.com> |
| |
| * python/py-record.c (gdbpy_stop_recording): Use Py_RETURN_NONE. |
| |
| 2019-01-03 Tom Tromey <tom@tromey.com> |
| |
| * python/py-value.c (valpy_dealloc): Use Py_XDECREF. |
| * python/py-type.c (typy_fields_items): Use gdbpy_ref. |
| * python/py-progspace.c (pspy_set_printers): Use gdbpy_ref. |
| (pspy_set_frame_filters, pspy_set_frame_unwinders) |
| (pspy_set_type_printers): Likewise. |
| * python/py-function.c (fnpy_init): Use gdbpy_ref. |
| * python/py-cmd.c (cmdpy_init): Use gdbpy_ref. |
| * python/py-objfile.c (objfpy_set_printers): Use gdbpy_ref. |
| (objfpy_set_frame_filters, objfpy_set_frame_unwinders) |
| (objfpy_set_type_printers): Likewise. |
| |
| 2019-01-03 Tom Tromey <tom@tromey.com> |
| |
| * python/python.c (gdbpy_enter, ~gdbpy_enter): Update. |
| (gdbpy_print_stack): Use gdbpy_err_fetch. |
| * python/python-internal.h (class gdbpy_err_fetch): New class. |
| (class gdbpy_enter) <m_error_type, m_error_value, |
| m_error_traceback>: Remove. |
| <m_error>: New member. |
| (gdbpy_exception_to_string): Don't declare. |
| * python/py-varobj.c (py_varobj_iter_next): Use gdbpy_err_fetch. |
| * python/py-value.c (convert_value_from_python): Use |
| gdbpy_err_fetch. |
| * python/py-utils.c (gdbpy_err_fetch::to_string): Rename from |
| gdbpy_exception_to_string. |
| (gdbpy_handle_exception): Use gdbpy_err_fetch. |
| * python/py-prettyprint.c (print_stack_unless_memory_error): Use |
| gdbpy_err_fetch. |
| |
| 2019-01-03 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * linux-nat.c (delete_lwp_cleanup): Delete. |
| (struct lwp_deleter): New struct. |
| (lwp_info_up): New typedef. |
| (linux_nat_target::follow_fork): Delete cleanup, and make use of |
| lwp_info_up. |
| |
| 2019-01-03 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * linux-fork.c (class scoped_switch_fork_info): New class. |
| (inferior_call_waitpid): Update to use scoped_switch_fork_info. |
| |
| 2019-01-03 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * valops.c (find_overload_match): Remove use of null_cleanup, and |
| calls to do_cleanups. |
| |
| 2019-01-03 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * compile/compile-cplus-types.c |
| (compile_cplus_instance::decl_name): Handle changes to |
| cp_func_name. |
| * cp-support.c (cp_func_name): Update header comment, update |
| return type. |
| * cp-support.h (cp_func_name): Update return type in declaration. |
| * valops.c (find_overload_match): Move temp_func local to top |
| level of function and change its type. Use temp_func to hold and |
| delete temporary string obtained from cp_func_name. |
| |
| 2019-01-03 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * remote.c (remote_target::remote_check_symbols): Convert `msg` to |
| gdb::char_vector, remove cleanup, and update uses of `msg`. |
| |
| 2019-01-03 Jim Wilson <jimw@sifive.com> |
| |
| * riscv-tdep.c (riscv_freg_feature): Drop s0 name from f8. |
| |
| 2019-01-02 Tom Tromey <tom@tromey.com> |
| |
| * xml-tdesc.c (xml_cache): Hold a target_desc_up. |
| (tdesc_parse_xml): Remove cleanups. |
| * target-descriptions.h (make_cleanup_free_target_description): |
| Don't declare. |
| (target_desc_deleter): New struct. |
| (target_desc_up): New typedef. |
| * target-descriptions.c (target_desc_deleter::operator()): Rename |
| from free_target_description. |
| (make_cleanup_free_target_description): Remove. |
| |
| 2019-01-02 Tom Tromey <tom@tromey.com> |
| |
| * linespec.c (struct linespec_parser): Rename from ls_parser. Add |
| constructor, destructor. |
| (linespec_parser): Remove typedef. |
| (~linespec_parser): Rename from linespec_parser_delete. |
| (linespec_lex_to_end, linespec_complete_label) |
| (linespec_complete): Update. |
| (decode_line_full): Remove cleanups. |
| (decode_line_1): Update. |
| |
| 2019-01-02 Tom Tromey <tom@tromey.com> |
| |
| * python/python-internal.h (inferior_to_inferior_object): Change |
| return type. |
| * python/py-exitedevent.c (create_exited_event_object): Update. |
| * python/py-inferior.c (inferior_to_inferior_object): Return |
| gdbpy_ref. |
| (python_new_inferior, python_inferior_deleted) |
| (thread_to_thread_object, delete_thread_object) |
| (build_inferior_list, gdbpy_selected_inferior): Update. |
| * python/py-infthread.c (create_thread_object): Update. Also fail |
| if inferior_to_inferior_object fails. |
| |
| 2019-01-02 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * inferior.h (class inferior) <displaced_step_state>: New field. |
| * infrun.h (struct displaced_step_state): Move here from |
| infrun.c. Initialize fields, add constructor. |
| <inf>: Remove field. |
| <reset>: New method. |
| * infrun.c (struct displaced_step_inferior_state): Move to |
| infrun.h. |
| (displaced_step_inferior_states): Remove. |
| (get_displaced_stepping_state): Adust. |
| (displaced_step_in_progress_any_inferior): Adjust. |
| (displaced_step_in_progress_thread): Adjust. |
| (displaced_step_in_progress): Adjust. |
| (add_displaced_stepping_state): Remove. |
| (get_displaced_step_closure_by_addr): Adjust. |
| (remove_displaced_stepping_state): Remove. |
| (infrun_inferior_exit): Call displaced_step_state.reset. |
| (use_displaced_stepping): Don't check for NULL. |
| (displaced_step_prepare_throw): Call |
| get_displaced_stepping_state. |
| (displaced_step_fixup): Don't check for NULL. |
| (prepare_for_detach): Don't check for NULL. |
| |
| 2019-01-02 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * infcall.c (call_function_by_hand_dummy): cleanup/destroy sm |
| in case of call that did not complete. |
| |
| 2019-01-02 Andrey Utkin <autkin@undo.io> |
| |
| * symfile.c (find_separate_debug_file): Fix search of debug files for |
| remote debuggee. |
| |
| 2019-01-02 Tom Tromey <tom@tromey.com> |
| |
| * python/py-inferior.c (gdbpy_initialize_inferior): Fix |
| indentation. |
| * python/py-frame.c (frapy_older): Remove cast. |
| (frapy_newer): Likewise. |
| * python/py-breakpoint.c (local_setattro): Remove cast. |
| * python/py-arch.c (archpy_name): Remove local variable. |
| * python/py-type.c (gdbpy_lookup_type): Remove cast. |
| |
| 2019-01-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * unittests/basic_string_view/element_access/char/empty.cc: |
| Fix year range in copyright header. |
| |
| 2019-01-01 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * arch/riscv.h (struct riscv_gdbarch_features) <hw_float_abi>: |
| Delete. |
| <operator==>: Update with for removed field. |
| <hash>: Likewise. |
| * riscv-tdep.h (struct gdbarch_tdep) <features>: Renamed to... |
| <isa_features>: ...this. |
| <abi_features>: New field. |
| (riscv_isa_flen): Update comment. |
| (riscv_abi_xlen): New declaration. |
| (riscv_abi_flen): New declaration. |
| * riscv-tdep.c (riscv_isa_xlen): Update to get answer from |
| isa_features. |
| (riscv_abi_xlen): New function. |
| (riscv_isa_flen): Update to get answer from isa_features. |
| (riscv_abi_flen): New function. |
| (riscv_has_fp_abi): Update to get answer from abi_features. |
| (riscv_call_info::riscv_call_info): Use abi xlen and flen, not isa |
| xlen and flen. |
| (riscv_call_info) <xlen, flen>: Update comment. |
| (riscv_call_arg_struct): Remove invalid assertions |
| (riscv_features_from_gdbarch_info): Update now hw_float_abi field |
| is removed. |
| (riscv_gdbarch_init): Gather isa features and abi features |
| separately, ensure both match on the gdbarch when reusing an old |
| gdbarch. Relax an error check to allow 32-bit abi float to run on |
| a target with 64-bit float hardware. |
| |
| 2019-01-01 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * source.c (search_command_helper): Stop reverse search |
| when line 1 has been searched. |
| |
| 2019-01-01 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * record-full.c (record_full_base_target::close): Rewrite |
| record_full_core_buf_list free logic. |
| |
| 2019-01-01 Philippe Waroquiers <philippe.waroquiers@skynet.be> |
| |
| * break-catch-syscall.c (print_one_catch_syscall): xfree |
| the last text. |
| |
| 2019-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Update Copyright year in version |
| message. |
| |
| 2019-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Update copyright year range in all GDB files. |
| |
| 2019-01-01, 19 Joel Brobecker <brobecker@adacore.com> |
| |
| * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2018. |
| |
| For older changes see ChangeLog-2018. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| coding: utf-8 |
| End: |
| |