| 2024-07-20 Nick Clifton <nickc@redhat.com> |
| |
| * 2.43 branch point. |
| |
| 2024-02-15 Will Hawkins <hawkinsw@obs.cr> |
| |
| * bpf-opc.c: Move callx into the v1 BPF CPU variant. |
| |
| 2024-02-14 Yuriy Kolerov <ykolerov@synopsys.com> |
| |
| * arc-tbl.h (dbnz): Use "DBNZ" class. |
| * arc-dis.c (arc_opcode_to_insn_type): Handle "DBNZ" class. |
| |
| 2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-opc.c (bpf_opcodes): Remove BPF_INSN_LDINDDW and |
| BPF_INSN_LDABSDW instructions. |
| |
| 2024-01-15 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2024-01-15 Nick Clifton <nickc@redhat.com> |
| |
| * 2.42 branch point. |
| |
| 2023-11-15 Arsen Arsenović <arsen@aarsen.me> |
| |
| * aclocal.m4: Regenerate. |
| * po/Make-in ($(srcdir)/$(PACKAGE).pot): Output to a .pot |
| temporary file to suppress xgettext checking charset names. |
| * configure.ac (SHARED_LIBADD): Use LTLIBINTL rather than |
| LIBINTL. |
| * configure: Regenerate. |
| * po/Make-in ($(srcdir)/$(PACKAGE).pot): Output to a .pot |
| temporary file, to suppress xgettext checking charset names. |
| |
| 2023-10-05 Neal frager <neal.frager@amd.com> |
| |
| * microblaze-opcm.h (struct op_code_struct): Tidy and remove |
| redundant entries. |
| * microblaze-opc.h (MAX_OPCODES): Increase to 300. |
| (op_code_struct): Add address extension instructions. |
| |
| 2023-10-04 Neal frager <neal.frager@amd.com> |
| |
| * microblaze-opc.h (struct op_code_struct): Add hiberante |
| and suspend entries. |
| * microblaze-opcm.h (enum microblaze_instr): Add microblaze_sleep, |
| hibernate, suspend entries. |
| |
| 2023-08-24 Tom Tromey <tom@tromey.com> |
| |
| * cgen.sh: Don't pass "-s" to cgen. |
| * Makefile.in: Rebuild. |
| * Makefile.am (GUILE): Simplify. |
| |
| 2023-07-31 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| PR 30705 |
| * bpf-dis.c (print_insn_bpf): Check that info->section->owner is |
| actually available before using it. |
| |
| 2023-07-30 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-dis.c: Initialize asm_bpf_version to -1. |
| (print_insn_bpf): Set BPF ISA version from the cpu version ELF |
| header flags if no explicit version set in the command line. |
| * disassemble.c (disassemble_init_for_target): Remove unused code. |
| |
| 2023-07-26 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-opc.c (bpf_opcodes): Fix BPF_INSN_NEGR to not use a src |
| register. |
| |
| 2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-opc.c (bpf_opcodes): Add entries for the BSWAP* |
| instructions. |
| |
| 2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-opc.c (bpf_opcodes): Fix pseudo-c syntax for MOVS* and LDXS* |
| instructions. |
| |
| 2023-07-23 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-opc.c (bpf_opcodes): Add entry for jal. |
| |
| 2023-07-21 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-opc.c (bpf_opcodes): Add entries for LDXS{B,W,H,DW} |
| instructions. |
| |
| 2023-07-21 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-opc.c (bpf_opcodes): Add entries for MOVS{8,16,32}R and |
| MOVS32{8,16,32}R instructions. and MOVS32I instructions. |
| |
| 2023-07-21 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * Makefile.am (TARGET64_LIBOPCODES_CFILES): Add missing bpf-dis.c |
| * Makefile.in: Regenerate. |
| |
| 2023-07-03 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2023-07-03 Nick Clifton <nickc@redhat.com> |
| |
| 2.41 Branch Point. |
| |
| 2023-05-23 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated translation. |
| |
| 2023-04-21 Tom Tromey <tromey@adacore.com> |
| |
| * i386-dis.c (OP_J): Check result of get16. |
| |
| 2023-04-12 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * arc-tbl.h: Remove vadds2, vadds2h, vadds4h, vaddsubs, |
| vaddsubs2h, vaddsubs4h, vsubadds, vsubadds2h, vsubadds4h, vsubs2, |
| vsubs2h, and vsubs4h instructions. |
| |
| 2023-04-11 Nick Clifton <nickc@redhat.com> |
| |
| PR 30310 |
| * nfp-dis.c (init_nfp6000_priv): Check that the output section |
| exists. |
| |
| 2023-03-15 Nick Clifton <nickc@redhat.com> |
| |
| PR 30231 |
| * mep-dis.c: Regenerate. |
| |
| 2023-03-15 Nick Clifton <nickc@redhat.com> |
| |
| PR 30230 |
| * arm-dis.c (get_sym_code_type): Check for non-ELF symbols. |
| |
| 2023-02-28 Richard Ball <richard.ball@arm.com> |
| |
| * aarch64-opc.c: Add MEC system registers. |
| |
| 2023-01-03 Nick Clifton <nickc@redhat.com> |
| |
| * po/de.po: Updated German translation. |
| * po/ro.po: Updated Romainian translation. |
| * po/uk.po: Updated Ukrainian translation. |
| |
| 2022-12-31 Nick Clifton <nickc@redhat.com> |
| |
| * 2.40 branch created. |
| |
| 2022-11-22 Shahab Vahedi <shahab@synopsys.com> |
| |
| * arc-regs.h: Change isa_config address to 0xc1. |
| isa_config exists for ARC700 and ARCV2 and not ARCALL. |
| |
| 2022-10-31 Yoshinori Sato <ysato@users.sourceforge.jp> |
| |
| * rx-decode.opc: Switch arguments of the MVTACGU insn. |
| * rx-decode.c: Regenerate. |
| |
| 2022-09-22 Yoshinori Sato <ysato@users.sourceforge.jp> |
| |
| * sh-dis.c (print_insn_sh): Enforce bit7 of LDC Rm,Rn_BANK and STC |
| Rm_BANK,Rn is always 1. |
| |
| 2022-07-21 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (XACC_MASK, XX3ACC_MASK): New defines. |
| (P_GER_MASK, xxmfacc, xxmtacc, xxsetaccz, xvi8ger4pp, xvi8ger4, |
| xvf16ger2pp, xvf16ger2, xvf32gerpp, xvf32ger, xvi4ger8pp, xvi4ger8, |
| xvi16ger2spp, xvi16ger2s, xvbf16ger2pp, xvbf16ger2, xvf64gerpp, |
| xvf64ger, xvi16ger2, xvf16ger2np, xvf32gernp, xvi8ger4spp, xvi16ger2pp, |
| xvbf16ger2np, xvf64gernp, xvf16ger2pn, xvf32gerpn, xvbf16ger2pn, |
| xvf64gerpn, xvf16ger2nn, xvf32gernn, xvbf16ger2nn, xvf64gernn: Use them. |
| |
| 2022-07-18 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * disassemble.c (disassemble_init_for_target): Set |
| created_styled_output for ARC based targets. |
| * arc-dis.c (find_format_from_table): Use fprintf_styled_ftype |
| instead of fprintf_ftype throughout. |
| (find_format): Likewise. |
| (print_flags): Likewise. |
| (print_insn_arc): Likewise. |
| |
| 2022-07-08 Nick Clifton <nickc@redhat.com> |
| |
| * 2.39 branch created. |
| |
| 2022-07-04 Marcus Nilsson <brainbomb@gmail.com> |
| |
| * disassemble.c: (disassemble_init_for_target): Set |
| created_styled_output for AVR based targets. |
| * avr-dis.c: (print_insn_avr): Use fprintf_styled_ftype |
| instead of fprintf_ftype throughout. |
| (avr_operand): Pass in and fill disassembler_style when |
| parsing operands. |
| |
| 2022-04-07 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * s390-mkopc.c (main): Enable z16 as CPU string in the opcode |
| table. |
| |
| 2022-03-16 Simon Marchi <simon.marchi@efficios.com> |
| |
| * configure.ac: Handle bfd_amdgcn_arch. |
| * configure: Re-generate. |
| |
| 2022-03-06 Sagar Patel <sagarmp@cs.unc.edu> |
| Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * mips-opc.c (mips_builtin_opcodes): Fix INSN2_ALIAS annotation |
| for "bal", "beqz", "beqzl", "bnez" and "bnezl" instructions. |
| * micromips-opc.c (micromips_opcodes): Likewise for "beqz" and |
| "bnez" instructions. |
| |
| 2022-02-17 Nick Clifton <nickc@redhat.com> |
| |
| * po/sr.po: Updated Serbian translation. |
| |
| 2022-02-14 Sergei Trofimovich <siarheit@google.com> |
| |
| * microblaze-opcm.h: Renamed 'fsqrt' to 'microblaze_fsqrt'. |
| * microblaze-opc.h: Follow 'fsqrt' rename. |
| |
| 2022-01-24 Nick Clifton <nickc@redhat.com> |
| |
| * po/ro.po: Updated Romanian translation. |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2022-01-22 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2022-01-22 Nick Clifton <nickc@redhat.com> |
| |
| * 2.38 release branch created. |
| |
| 2022-01-17 Nick Clifton <nickc@redhat.com> |
| |
| * Makefile.in: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2021-12-02 Marcus Nilsson <brainbomb@gmail.com> |
| |
| * avr-dis.c (avr_operand); Pass in disassemble_info and fill |
| in insn_type on branching instructions. |
| |
| 2021-11-25 Andrew Burgess <aburgess@redhat.com> |
| Simon Cook <simon.cook@embecosm.com> |
| |
| * riscv-dis.c (enum riscv_option_arg_t): New enum typedef. |
| (riscv_options): New static global. |
| (disassembler_options_riscv): New function. |
| (print_riscv_disassembler_options): Rewrite to use |
| disassembler_options_riscv. |
| |
| 2021-11-25 Nick Clifton <nickc@redhat.com> |
| |
| PR 28614 |
| * aarch64-asm.c: Replace assert(0) with real code. |
| * aarch64-dis.c: Likewise. |
| * aarch64-opc.c: Likewise. |
| |
| 2021-11-25 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po; Updated French translation. |
| |
| 2021-10-27 Maciej W. Rozycki <macro@embecosm.com> |
| |
| * Makefile.am: Remove obsolete comment. |
| * configure.ac: Refer `libbfd.la' to link shared BFD library |
| except for Cygwin. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-09-27 Nick Alcock <nick.alcock@oracle.com> |
| |
| * configure: Regenerate. |
| |
| 2021-09-25 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <mfppr, mfppr32, mtppr, mtppr32>: Enable |
| on POWER5 and later. |
| |
| 2021-09-20 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * riscv-dis.c (riscv_disassemble_insn): Print a .%dbyte opcode |
| before an unknown instruction, '%d' is replaced with the |
| instruction length. |
| |
| 2021-09-02 Nick Clifton <nickc@redhat.com> |
| |
| PR 28292 |
| * v850-opc.c (D16): Use BFD_RELOC_V850_LO16_SPLIT_OFFSET in place |
| of BFD_RELOC_16. |
| |
| 2021-08-17 Shahab Vahedi <shahab@synopsys.com> |
| |
| * arc-regs.h (DEF): Fix the register numbers. |
| |
| 2021-08-10 Nick Clifton <nickc@redhat.com> |
| |
| * po/sr.po: Updated Serbian translation. |
| |
| 2021-07-26 Chenghua Xu <xuchenghua@loongson.cn> |
| |
| * mips-dis.c (mips_arch_choices): Correct gs264e bfd_mach. |
| |
| 2021-06-07 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * s390-opc.txt: Add qpaci. |
| |
| 2021-07-03 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2021-07-03 Nick Clifton <nickc@redhat.com> |
| |
| * 2.37 release branch created. |
| |
| 2021-07-02 Alan Modra <amodra@gmail.com> |
| |
| * nds32-dis.c (nds32_find_reg_keyword): Constify arg and return. |
| (nds32_parse_audio_ext, nds32_parse_opcode): Constify psys_reg. |
| (nds32_field_table, nds32_opcode_table, nds32_keyword_table), |
| (nds32_opcodes, nds32_operand_fields, nds32_keywords), |
| (nds32_keyword_gpr): Move declarations to.. |
| * nds32-asm.h: ..here, constifying to match definitions. |
| |
| 2021-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.am (GUILE): New variable. |
| (CGEN): Use $(GUILE). |
| * Makefile.in: Regenerate. |
| |
| 2021-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * mep-asm.c (macros): Mark static & const. |
| (lookup_macro): Change return & m to const. |
| (expand_macro): Change mac to const. |
| (expand_string): Change pmacro to const. |
| |
| 2021-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * nds32-asm.c (operand_fields): Rename to ... |
| (nds32_operand_fields): ... this. |
| (keyword_gpr): Rename to ... |
| (nds32_keyword_gpr): ... this. |
| (keyword_usr, keyword_dxr, keyword_sr, keyword_cp, keyword_cpr, |
| keyword_fsr, keyword_fdr, keyword_abdim, keyword_abm, |
| keyword_dpref_st, keyword_cctl_lv, keyword_standby_st, |
| keyword_msync_st, keyword_im5_i, keyword_im5_m, keyword_accumulator, |
| keyword_aridx, keyword_aridx2, keyword_aridxi, keyword_aridxi_mx): |
| Mark static. |
| (keywords): Rename to ... |
| (nds32_keywords): ... this. |
| * nds32-dis.c: Rename operand_fields to nds32_operand_fields, |
| keywords to nds32_keywords, and keyword_gpr to nds32_keyword_gpr. |
| |
| 2021-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * z80-dis.c (opc_ed): Make const. |
| (pref_ed): Make p const. |
| |
| 2021-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * microblaze-dis.c (get_field_special): Make op const. |
| (read_insn_microblaze): Make opr & op const. Rename opcodes to |
| microblaze_opcodes. |
| (print_insn_microblaze): Make op & pop const. |
| (get_insn_microblaze): Make op const. Rename opcodes to |
| microblaze_opcodes. |
| (microblaze_get_target_address): Likewise. |
| * microblaze-opc.h (struct op_code_struct): Make const. |
| Rename opcodes to microblaze_opcodes. |
| |
| 2021-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * aarch64-gen.c (aarch64_opcode_table): Add const. |
| * aarch64-tbl.h (aarch64_opcode_table): Likewise. |
| |
| 2021-06-22 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * cgen-dis.c (count_decodable_bits): Use __builtin_popcount when |
| available. |
| |
| 2021-06-22 Alan Modra <amodra@gmail.com> |
| |
| * pj-dis.c (print_insn_pj): Don't print trailing tab. Do |
| print separator for pcrel insns. |
| |
| 2021-06-19 Alan Modra <amodra@gmail.com> |
| |
| * vax-dis.c (print_insn_vax): Avoid pointer overflow. |
| |
| 2021-06-19 Alan Modra <amodra@gmail.com> |
| |
| * tic30-dis.c (get_register_operand): Don't ask strncpy to fill |
| entire buffer. |
| |
| 2021-06-17 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Move cell db*cyc to proper location |
| in table. |
| |
| 2021-06-03 Alan Modra <amodra@gmail.com> |
| |
| PR 1202 |
| * mcore-dis.c (print_insn_mcore): Correct loopt disassembly. |
| Use unsigned int for inst. |
| |
| 2021-06-02 Shahab Vahedi <shahab@synopsys.com> |
| |
| * arc-dis.c (arc_option_arg_t): New enumeration. |
| (arc_options): New variable. |
| (disassembler_options_arc): New function. |
| (print_arc_disassembler_options): Reimplement in terms of |
| "disassembler_options_arc". |
| |
| 2021-05-29 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (lookup_powerpc): Test deprecated field when -Many. |
| Don't special case PPC_OPCODE_RAW. |
| (lookup_prefix): Likewise. |
| (lookup_vle, lookup_spe2): Similarly. Add dialect parameter and.. |
| (print_insn_powerpc): ..update caller. |
| * ppc-opc.c (EXT): Define. |
| (powerpc_opcodes): Mark extended mnemonics with EXT. |
| (prefix_opcodes, vle_opcodes): Likewise. |
| (XISEL, XISEL_MASK): Add cr field and simplify. |
| (powerpc_opcodes): Use XISEL with extended isel mnemonics and sort |
| all isel variants to where the base mnemonic belongs. Sort dstt, |
| dststt and dssall. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * mips-opc.c (mips_builtin_opcodes): Reorder legacy COP0, COP2, |
| COP3 opcode instructions. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * mips-opc.c (mips_builtin_opcodes): Update exclusion list for |
| "ldc2", "ldc3", "lwc0", "lwc2", "lwc3", "sdc2", "sdc3", "swc0", |
| "swc2", "swc3", "cfc0", "ctc0", "bc2f", "bc2fl", "bc2t", |
| "bc2tl", "cfc2", "ctc2", "dmfc2", "dmtc2", "mfc2", "mtc2", |
| "bc3f", "bc3fl", "bc3t", "bc3tl", "cfc3", "ctc3", "mfc3", |
| "mtc3", "bc0f", "bc0fl", "bc0t", "bc0tl", "rfe", "c2", "c3", |
| "cop2", and "cop3" entries. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * mips-opc.c (mips_builtin_opcodes): Remove "dmfc3" and "dmtc3" |
| entries and associated comments. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * mips-opc.c (mips_builtin_opcodes): Move the "rfe" entry ahead |
| of "c0". |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * mips-dis.c (mips_cp1_names_mips): New variable. |
| (mips_arch_choices): Use it rather than `mips_cp1_names_numeric' |
| for "r3000", "r4000", "r4010", "vr4100", "vr4111", "vr4120", |
| "r4300", "r4400", "r4600", "r4650", "r5000", "vr5400", "vr5500", |
| "r5900", "r6000", "rm7000", "rm9000", "r8000", "r10000", |
| "r12000", "r14000", "r16000", "mips5", "loongson2e", and |
| "loongson2f". |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * mips-dis.c (print_reg) <OP_REG_COPRO>: Move control register |
| handling code over to... |
| <OP_REG_CONTROL>: ... this new case. |
| * mips-opc.c (decode_mips_operand) <'g', 'y'>: New cases. |
| (mips_builtin_opcodes): Update "cfc1", "ctc1", "cttc1", "cttc2", |
| "cfc0", "ctc0", "cfc2", "ctc2", "cfc3", and "ctc3" entries |
| replacing the `G' operand code with `g'. Update "cftc1" and |
| "cftc2" entries replacing the `E' operand code with `y'. |
| * micromips-opc.c (decode_micromips_operand) <'g'>: New case. |
| (micromips_opcodes): Update "cfc1", "cfc2", "ctc1", and "ctc2" |
| entries replacing the `G' operand code with `g'. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * mips-dis.c (mips_cp0_names_r3900): New variable. |
| (mips_arch_choices): Use it rather than `mips_cp0_names_numeric' |
| for "r3900". |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * mips-opc.c (mips_builtin_opcodes): Switch "cttc2", "mttc2", |
| and "mtthc2" to using the `G' rather than `g' operand code for |
| the coprocessor control register referred. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * micromips-opc.c (micromips_opcodes): Swap the two "dmtc1" |
| entries with each other. |
| |
| 2021-05-27 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <xxmr, xxlnot>: New extended mnemonics. |
| |
| 2021-05-25 Alan Modra <amodra@gmail.com> |
| |
| * cris-desc.c: Regenerate. |
| * cris-desc.h: Regenerate. |
| * cris-opc.h: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2021-05-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.am (HFILES): Add cris-desc.h & cris-opc.h. |
| (TARGET_LIBOPCODES_CFILES): Add cris-desc.c. |
| (CGEN_CPUS): Add cris. |
| (CRIS_DEPS): Define. |
| (stamp-cris): New rule. |
| * cgen.sh: Handle desc action. |
| * configure.ac (bfd_cris_arch): Add cris-desc.lo. |
| * Makefile.in, configure: Regenerate. |
| |
| 2021-05-18 Job Noorman <mtvec@pm.me> |
| |
| PR 27814 |
| * riscv-dis.c (riscv_get_disassembler): Get elf attributes only for |
| the elf objects. |
| |
| 2021-05-17 Alex Coplan <alex.coplan@arm.com> |
| |
| * arm-dis.c (mve_opcodes): Fix disassembly of |
| MVE_VMOV2_GP_TO_VEC_LANE when idx == 1. |
| (is_mve_encoding_conflict): MVE vector loads should not match |
| when P = W = 0. |
| (is_mve_unpredictable): It's not unpredictable to use the same |
| source register twice (for MVE_VMOV2_GP_TO_VEC_LANE). |
| |
| 2021-05-11 Nick Clifton <nickc@redhat.com> |
| |
| PR 27840 |
| * tic30-dis.c (print_insn_tic30): Prevent attempts to read beyond |
| the end of the code buffer. |
| |
| 2021-05-06 Stafford Horne <shorne@gmail.com> |
| |
| PR 21464 |
| * or1k-asm.c: Regenerate. |
| |
| 2021-05-01 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * xtensa-dis.c (print_insn_xtensa): Fill in info->insn_type and |
| info->insn_info_valid. |
| |
| 2021-04-26 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (lea): Add Optimize. |
| * opcodes/i386-tbl.h: Re-generate. |
| |
| 2020-04-23 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * xtensa-dis.c (print_xtensa_operand): For PC-relative operand |
| of l32r fetch and display referenced literal value. |
| |
| 2021-04-23 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * xtensa-dis.c (print_insn_xtensa): Set info->bytes_per_chunk |
| to 4 for literal disassembly. |
| |
| 2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Add new registers (RPAOS, RPALOS, PAALLOS, PAALL) support |
| for TLBI instruction. |
| |
| 2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Add new register (CIPAPA, CIGDPAPA) support for |
| DC instruction. |
| |
| 2021-04-19 Jan Beulich <jbeulich@suse.com> |
| |
| * aarch64-asm.c (encode_asimd_fcvt): Add initializer for |
| "qualifier". |
| (convert_mov_to_movewide): Add initializer for "value". |
| |
| 2021-04-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Add RME system registers. |
| |
| 2021-04-16 Lifang Xia <lifang_xia@c-sky.com> |
| |
| * riscv-opc.c (riscv_opcodes): New insn alias for addi. Compress |
| "addi d,CV,z" to "c.mv d,CV". |
| |
| 2021-04-12 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac (--enable-checking): Add support. |
| * config.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-04-09 Tejas Belagod <tejas.belagod@arm.com> |
| |
| * aarch64-tbl.h (struct aarch64_opcode aarch64_opcode_table): Reclassify |
| LD64/ST64 instructions to lse_atomic instead of ldstexcl. |
| |
| 2021-04-09 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (struct dis_private): Add "special". |
| (POWERPC_DIALECT): Delete. Replace uses with.. |
| (private_data): ..this. New inline function. |
| (disassemble_init_powerpc): Init "special" names. |
| (skip_optional_operands): Add is_pcrel arg, set when detecting R |
| field of prefix instructions. |
| (bsearch_reloc, print_got_plt): New functions. |
| (print_insn_powerpc): For pcrel instructions, print target address |
| and symbol if known, and decode plt and got loads too. |
| |
| 2021-04-08 Alan Modra <amodra@gmail.com> |
| |
| PR 27684 |
| * ppc-opc.c (powerpc_opcodes): Correct usprg typos, add mfpir. |
| |
| 2021-04-08 Alan Modra <amodra@gmail.com> |
| |
| PR 27676 |
| * ppc-opc.c (DCBT_EO): Move earlier. |
| (insert_thct, extract_thct, insert_thds, extract_thds): New functions. |
| (powerpc_operands): Add THCT and THDS entries. |
| (powerpc_opcodes): Add dcbtstct, dcbtstds, dcbna, dcbtct, dcbtds. |
| |
| 2021-04-06 Alan Modra <amodra@gmail.com> |
| |
| * dis-buf.c (generic_symbol_at_address): Return symbol* NULL. |
| * s12z-dis.c (decode_possible_symbol): Use symbol returned from |
| symbol_at_address_func. |
| |
| 2021-04-05 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac: Don't check for limits.h, string.h, strings.h or |
| stdlib.h. |
| (AC_ISC_POSIX): Don't invoke. |
| * sysdep.h: Include stdlib.h and string.h unconditionally. |
| * i386-opc.h: Include limits.h unconditionally. |
| * wasm32-dis.c: Likewise. |
| * cgen-opc.c: Don't include alloca-conf.h. |
| * config.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-04-01 Martin Liska <mliska@suse.cz> |
| |
| * arm-dis.c (strneq): Remove strneq and use startswith. |
| * cr16-dis.c (print_insn_cr16): Likewise. |
| * score-dis.c (streq): Likewise. |
| (strneq): Likewise. |
| * score7-dis.c (strneq): Likewise. |
| |
| 2021-04-01 Alan Modra <amodra@gmail.com> |
| |
| PR 27675 |
| * ppc-opc.c (powerpc_opcodes): Add mfummcr2 and mfmmcr2. |
| |
| 2021-03-31 Alan Modra <amodra@gmail.com> |
| |
| * sysdep.h (POISON_BFD_BOOLEAN): Define. |
| * aarch64-asm-2.c, * aarch64-asm.c, * aarch64-asm.h, |
| * aarch64-dis-2.c, * aarch64-dis.c, * aarch64-dis.h, |
| * aarch64-gen.c, * aarch64-opc.c, * aarch64-opc.h, * arc-dis.c, |
| * arc-dis.h, * arc-fxi.h, * arc-opc.c, * arm-dis.c, * bfin-dis.c, |
| * cris-dis.c, * csky-dis.c, * csky-opc.h, * dis-buf.c, |
| * disassemble.c, * frv-opc.c, * frv-opc.h, * h8300-dis.c, |
| * i386-dis.c, * m68k-dis.c, * metag-dis.c, * microblaze-dis.c, |
| * microblaze-dis.h, * micromips-opc.c, * mips-dis.c, |
| * mips-formats.h, * mips-opc.c, * mips16-opc.c, * mmix-dis.c, |
| * msp430-dis.c, * nds32-dis.c, * nfp-dis.c, * nios2-dis.c, |
| * ppc-dis.c, * riscv-dis.c, * score-dis.c, * score7-dis.c, |
| * tic6x-dis.c, * v850-dis.c, * vax-dis.c, * wasm32-dis.c, |
| * xtensa-dis.c: Replace bfd_boolean with bool, FALSE with false, |
| and TRUE with true throughout. |
| |
| 2021-03-31 Alan Modra <amodra@gmail.com> |
| |
| * aarch64-dis.c: Include stdint.h in place of bfd_stdint.h. |
| * aarch64-dis.h: Likewise. |
| * aarch64-opc.c: Likewise. |
| * avr-dis.c: Likewise. |
| * csky-dis.c: Likewise. |
| * nds32-asm.c: Likewise. |
| * nds32-dis.c: Likewise. |
| * nfp-dis.c: Likewise. |
| * riscv-dis.c: Likewise. |
| * s12z-dis.c: Likewise. |
| * wasm32-dis.c: Likewise. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.c (cs, ds, ss, es, fs, gs): Delete. |
| (i386_seg_prefixes): New. |
| * i386-opc.h (cs, ds, ss, es, fs, gs): Delete. |
| (i386_seg_prefixes): Declare. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.h (REGNAM_AL, REGNAM_AX, REGNAM_EAX): Delete. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.h (REGNAM_AL, REGNAM_AX, REGNAM_EAX): Adjust values. |
| * i386-reg.tbl (st): Move down. |
| (st(0)): Delete. Extend comment. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-29 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (movq, movabs): Move next to mov counterparts. |
| (cmpsd): Move next to cmps. |
| (movsd): Move next to movs. |
| (cmpxchg16b): Move to separate section. |
| (fisttp, fisttpll): Likewise. |
| (monitor, mwait): Likewise. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-29 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (psadbw): Add <sse2:comm>. |
| (vpsadbw): Add C. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-29 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (mmx, sse, sse2, sse3, ssse3, sse41, sse42, aes, |
| pclmul, gfni): New templates. Use them wherever possible. Move |
| SSE4.1 pextrw into respective section. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-29 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (output_i386_opcode): Widen type of "opcode". Use |
| strtoull(). Bump upper loop bound. Widen masks. Sanity check |
| "length". |
| * i386-opc.tbl (Prefix_0X66, Prefix_0XF2, Prefix_0XF3): Delete. |
| Convert all of their uses to representation in opcode. |
| |
| 2021-03-29 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.h (struct insn_template): Shrink base_opcode to 16 |
| bits. Shrink extension_opcode to 9 bits. Make it signed. Change |
| value of None. Shrink operands to 3 bits. |
| |
| 2021-03-29 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (process_i386_opcode_modifier): New parameter |
| "space". |
| (output_i386_opcode): New local variable "space". Adjust |
| process_i386_opcode_modifier() invocation. |
| (process_i386_opcodes): Adjust process_i386_opcode_modifier() |
| invocation. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-29 Alan Modra <amodra@gmail.com> |
| |
| * aarch64-opc.c (vector_qualifier_p): Simplify boolean expression. |
| (fp_qualifier_p, get_data_pattern): Likewise. |
| (aarch64_get_operand_modifier_from_value): Likewise. |
| (aarch64_extend_operator_p, aarch64_shift_operator_p): Likewise. |
| (operand_variant_qualifier_p): Likewise. |
| (qualifier_value_in_range_constraint_p): Likewise. |
| (aarch64_get_qualifier_esize): Likewise. |
| (aarch64_get_qualifier_nelem): Likewise. |
| (aarch64_get_qualifier_standard_value): Likewise. |
| (get_lower_bound, get_upper_bound): Likewise. |
| (aarch64_find_best_match, match_operands_qualifier): Likewise. |
| (aarch64_print_operand): Likewise. |
| * aarch64-opc.h (operand_has_inserter, operand_has_extractor): Likewise. |
| (operand_need_sign_extension, operand_need_shift_by_two): Likewise. |
| (operand_need_shift_by_four, operand_maybe_stack_pointer): Likewise. |
| * arm-dis.c (print_insn_mve, print_insn_thumb32): Likewise. |
| * tic6x-dis.c (tic6x_check_fetch_packet_header): Likewise. |
| (print_insn_tic6x): Likewise. |
| |
| 2021-03-29 Alan Modra <amodra@gmail.com> |
| |
| * arc-dis.c (extract_operand_value): Correct NULL cast. |
| * frv-opc.h: Regenerate. |
| |
| 2021-03-26 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (movq): Add CpuSSE2 to SSE2 form. Add CpuMMX to |
| MMX form. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-25 Abid Qadeer <abidh@codesourcery.com> |
| |
| * nios2-dis.c (nios2_print_insn_arg): Fix sign extension of |
| immediate in br.n instruction. |
| |
| 2021-03-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (XMGatherD, VexGatherD): New. |
| (vex_table): Use VexGatherD for vpgatherd* and vgatherdp*. |
| (print_insn): Check masking for S/G insns. |
| (OP_E_memory): New local variable check_gather. Extend mandatory |
| SIB check. Check register conflicts for (EVEX-encoded) gathers. |
| Extend check for disallowed 16-bit addressing. |
| (OP_VEX): New local variables modrm_reg and sib_index. Convert |
| if()s to switch(). Check register conflicts for (VEX-encoded) |
| gathers. Drop no longer reachable cases. |
| * i386-dis-evex.h (evex_table): Use XMGatherD for vpgatherd* and |
| vgatherdp*. |
| |
| 2021-03-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (print_insn): Mark as bad EVEX encodings specifying |
| zeroing-masking without masking. |
| |
| 2021-03-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (invlpgb): Fix multi-operand form. |
| (pvalidate, rmpupdate, rmpadjust): Add multi-operand forms. Mark |
| single-operand forms as deprecated. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-25 Alan Modra <amodra@gmail.com> |
| |
| PR 27647 |
| * ppc-opc.c (XLOCB_MASK): Delete. |
| (XLBOBB_MASK, XLBOBIBB_MASK, XLBOCBBB_MASK): Define using |
| XLBH_MASK. |
| (powerpc_opcodes): Accept a BH field on all extended forms of |
| bclr, bclrl, bcctr, bcctrl, bctar, bctarl. |
| |
| 2021-03-24 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (output_i386_opcode): Drop processing of |
| opcode_length. Calculate length from base_opcode. Adjust prefix |
| encoding determination. |
| (process_i386_opcodes): Drop output of fake opcode_length. |
| * i386-opc.h (struct insn_template): Drop opcode_length field. |
| * i386-opc.tbl: Drop opcode length field from all templates. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-24 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (process_i386_opcode_modifier): Return void. New |
| parameter "prefix". Drop local variable "regular_encoding". |
| Record prefix setting / check for consistency. |
| (output_i386_opcode): Parse opcode_length and base_opcode |
| earlier. Derive prefix encoding. Drop no longer applicable |
| consistency checking. Adjust process_i386_opcode_modifier() |
| invocation. |
| (process_i386_opcodes): Adjust process_i386_opcode_modifier() |
| invocation. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-24 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (process_i386_opcode_modifier): Drop IsPrefix |
| check. |
| * i386-opc.h (Prefix_*): Move #define-s. |
| * i386-opc.tbl: Move pseudo prefix enumerator values to |
| extension opcode field. Introduce pseudopfx template. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-23 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.h (PREFIX_0XF2, PREFIX_0XF3): Excahnge values. Extend |
| comment. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-23 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.h (struct insn_template): Move cpu_flags field past |
| opcode_modifier one. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-23 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (opcode_modifiers): New OpcodeSpace element. |
| * i386-opc.h (OpcodeSpace): New enumerator. |
| (VEX0F, VEX0F38, VEX0F3A, XOP08, XOP09, XOP0A): Rename to ... |
| (SPACE_BASE, SPACE_0F, SPACE_0F38, SPACE_0F3A, SPACE_XOP08, |
| SPACE_XOP09, SPACE_XOP0A): ... respectively. |
| (struct i386_opcode_modifier): New field opcodespace. Shrink |
| opcodeprefix field. |
| i386-opc.tbl (Space0F, Space0F38, Space0F3A, SpaceXOP08, |
| SpaceXOP09, SpaceXOP0A): Define. Use them to replace |
| OpcodePrefix uses. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-03-22 Martin Liska <mliska@suse.cz> |
| |
| * aarch64-dis.c (parse_aarch64_dis_option): Replace usage of CONST_STRNEQ with startswith. |
| * arc-dis.c (parse_option): Likewise. |
| * arm-dis.c (parse_arm_disassembler_options): Likewise. |
| * cris-dis.c (print_with_operands): Likewise. |
| * h8300-dis.c (bfd_h8_disassemble): Likewise. |
| * i386-dis.c (print_insn): Likewise. |
| * ia64-gen.c (fetch_insn_class): Likewise. |
| (parse_resource_users): Likewise. |
| (in_iclass): Likewise. |
| (lookup_specifier): Likewise. |
| (insert_opcode_dependencies): Likewise. |
| * mips-dis.c (parse_mips_ase_option): Likewise. |
| (parse_mips_dis_option): Likewise. |
| * s390-dis.c (disassemble_init_s390): Likewise. |
| * wasm32-dis.c (parse_wasm32_disassembler_options): Likewise. |
| |
| 2021-03-16 Kuan-Lin Chen <kuanlinchentw@gmail.com> |
| |
| * riscv-opc.c (riscv_opcodes): Add zba, zbb and zbc instructions. |
| |
| 2021-03-12 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Add lorc_el1, lorea_el1, lorn_el1, lorsa_el1, |
| icc_ctlr_el3, icc_sre_elx, ich_vtr_el2 system registers. |
| |
| 2021-03-12 Alan Modra <amodra@gmail.com> |
| |
| * i386-dis.c (print_insn <PREFIX_IGNORED>): Correct typo. |
| |
| 2021-03-11 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_XMM): Re-order checks. |
| |
| 2021-03-11 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (putop): Drop need_vex check when also checking |
| vex.evex. |
| (intel_operand_size, OP_E_memory): Drop vex.evex check when also |
| checking vex.b. |
| |
| 2021-03-11 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_E_memory): Drop xmmq_mode from broadcast |
| checks. Move case label past broadcast check. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (MVexVSIBDQWpX, MVexVSIBQDWpX, |
| vex_vsib_d_w_d_mode, vex_vsib_q_w_d_mode, |
| REG_EVEX_0F38C7_M_0_L_2_W_0, REG_EVEX_0F38C7_M_0_L_2_W_1, |
| EVEX_W_0F3891, EVEX_W_0F3893, EVEX_W_0F38A1, EVEX_W_0F38A3, |
| EVEX_W_0F38C7_M_0_L_2): Delete. |
| (REG_EVEX_0F38C7_M_0_L_2): New. |
| (intel_operand_size): Handle VEX and EVEX the same for |
| vex_vsib_d_w_dq_mode and vex_vsib_q_w_dq_mode. Drop |
| vex_vsib_d_w_d_mode and vex_vsib_q_w_d_mode cases. |
| (OP_E_memory, OP_XMM, OP_VEX): Drop vex_vsib_d_w_d_mode and |
| vex_vsib_q_w_d_mode uses. |
| * i386-dis-evex.h (evex_table): Adjust opcode 0F3891, 0F3893, |
| 0F38A1, and 0F38A3 entries. |
| * i386-dis-evex-len.h (evex_len_table): Adjust opcode 0F38C7 |
| entry. |
| * i386-dis-evex-reg.h: Fold opcode 0F38C7 entries. |
| * i386-dis-evex-w.h: Delete opcode 0F3891, 0F3893, 0F38A1, and |
| 0F38A3 entries. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (REG_0FXOP_09_01_L_0, REG_0FXOP_09_02_L_0, |
| REG_0FXOP_09_12_M_1_L_0, REG_0FXOP_0A_12_L_0, |
| MOD_VEX_0FXOP_09_12): Rename to ... |
| (REG_XOP_09_01_L_0, REG_XOP_09_02_L_0, REG_XOP_09_12_M_1_L_0, |
| REG_XOP_0A_12_L_0, MOD_XOP_09_12): ... these. |
| (MOD_62_32BIT, MOD_8D, MOD_C4_32BIT, MOD_C5_32BIT, |
| RM_0F3A0F_P_1_MOD_3_REG_0, X86_64_0F24, X86_64_0F26, |
| X86_64_VEX_0F3849, X86_64_VEX_0F384B, X86_64_VEX_0F385C, |
| X86_64_VEX_0F385E, X86_64_0FC7_REG_6_MOD_3_PREFIX_1): Move. |
| (reg_table): Adjust comments. |
| (x86_64_table): Move X86_64_0F24, X86_64_0F26, |
| X86_64_VEX_0F3849, X86_64_VEX_0F384B, X86_64_VEX_0F385C, |
| X86_64_VEX_0F385E, and X86_64_0FC7_REG_6_MOD_3_PREFIX_1 entries. |
| (xop_table): Adjust opcode 09_01, 09_02, and 09_12 entries. |
| (vex_len_table): Adjust opcode 0A_12 entry. |
| (mod_table): Move MOD_62_32BIT, MOD_8D, MOD_C4_32BIT, |
| MOD_C5_32BIT, and MOD_XOP_09_12 entries. |
| (rm_table): Move hreset entry. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (EVEX_LEN_0F6E, EVEX_LEN_0F7E_P_1, |
| EVEX_LEN_0F7E_P_2, EVEX_LEN_0FC4, EVEX_LEN_0FC5, EVEX_LEN_0FD6, |
| EVEX_LEN_0F3816, EVEX_LEN_0F3A14, EVEX_LEN_0F3A15, |
| EVEX_LEN_0F3A16, EVEX_LEN_0F3A17, EVEX_LEN_0F3A20, |
| EVEX_LEN_0F3A21_W_0, EVEX_LEN_0F3A22, EVEX_W_0FD6_L_0): Delete. |
| (EVEX_LEN_0F3816, EVEX_W_0FD6): New. |
| (get_valid_dis386): Also handle 512-bit vector length when |
| vectoring into vex_len_table[]. |
| * i386-dis-evex.h (evex_table): Adjust opcode 0F6E, 0FC4, 0FC5, |
| 0FD6, 0F3A14, 0F3A15, 0F3A16, 0F3A17, 0F3A20, and 0F3A22 |
| entries. |
| * i386-dis-evex-len.h: Delete opcode 0F6E, 0FC4, 0FC5, 0FD6, |
| 0F3A14, 0F3A15, 0F3A16, 0F3A17, 0F3A20, and 0F3A22 entries. |
| * i386-dis-evex-prefix.h: Adjust 0F7E entry. |
| * i386-dis-evex-w.h: Adjust 0F7E, 0F7F, 0FD6, and 0F3A21 |
| entries. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (EVEX_LEN_0F3A00_W_1, EVEX_LEN_0F3A01_W_1): |
| Rename to EVEX_LEN_0F3A00 and EVEX_LEN_0F3A01 respectively. |
| EVEX_W_0F3A00, EVEX_W_0F3A01): Delete. |
| * i386-dis-evex.h (evex_table): Adjust opcode 0F3A00 and 0F3A01 |
| entries. |
| * i386-dis-evex-len.h (evex_len_table): Likewise. |
| * i386-dis-evex-w.h: Remove opcode 0F3A00 and 0F3A01 entries. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (REG_EVEX_0F38C6, REG_EVEX_0F38C7, |
| MOD_EVEX_0F381A_W_0, MOD_EVEX_0F381A_W_1, MOD_EVEX_0F381B_W_0, |
| MOD_EVEX_0F381B_W_1, MOD_EVEX_0F385A_W_0, MOD_EVEX_0F385A_W_1, |
| MOD_EVEX_0F385B_W_0, MOD_EVEX_0F385B_W_1, |
| MOD_EVEX_0F38C6_REG_1, MOD_EVEX_0F38C6_REG_2, |
| MOD_EVEX_0F38C6_REG_5, MOD_EVEX_0F38C6_REG_6, |
| MOD_EVEX_0F38C7_REG_1, MOD_EVEX_0F38C7_REG_2, |
| MOD_EVEX_0F38C7_REG_5, MOD_EVEX_0F38C7_REG_6 |
| EVEX_LEN_0F3819_W_0, EVEX_LEN_0F3819_W_1, |
| EVEX_LEN_0F381A_W_0_M_0, EVEX_LEN_0F381A_W_1_M_0, |
| EVEX_LEN_0F381B_W_0_M_0, EVEX_LEN_0F381B_W_1_M_0, |
| EVEX_LEN_0F385A_W_0_M_0, EVEX_LEN_0F385A_W_1_M_0, |
| EVEX_LEN_0F385B_W_0_M_0, EVEX_LEN_0F385B_W_1_M_0, |
| EVEX_LEN_0F38C6_R_1_M_0, EVEX_LEN_0F38C6_R_2_M_0, |
| EVEX_LEN_0F38C6_R_5_M_0, EVEX_LEN_0F38C6_R_6_M_0, |
| EVEX_LEN_0F38C7_R_1_M_0_W_0, EVEX_LEN_0F38C7_R_1_M_0_W_1, |
| EVEX_LEN_0F38C7_R_2_M_0_W_0, EVEX_LEN_0F38C7_R_2_M_0_W_1, |
| EVEX_LEN_0F38C7_R_5_M_0_W_0, EVEX_LEN_0F38C7_R_5_M_0_W_1, |
| EVEX_LEN_0F38C7_R_6_M_0_W_0, EVEX_LEN_0F38C7_R_6_M_0_W_1, |
| EVEX_LEN_0F3A18_W_0, EVEX_LEN_0F3A18_W_1, EVEX_LEN_0F3A19_W_0, |
| EVEX_LEN_0F3A19_W_1, EVEX_LEN_0F3A1A_W_0, EVEX_LEN_0F3A1A_W_1, |
| EVEX_LEN_0F3A1B_W_0, EVEX_LEN_0F3A1B_W_1, EVEX_LEN_0F3A23_W_0, |
| EVEX_LEN_0F3A23_W_1, EVEX_LEN_0F3A38_W_0, EVEX_LEN_0F3A38_W_1, |
| EVEX_LEN_0F3A39_W_0, EVEX_LEN_0F3A39_W_1, EVEX_LEN_0F3A3A_W_0, |
| EVEX_LEN_0F3A3A_W_1, EVEX_LEN_0F3A3B_W_0, EVEX_LEN_0F3A3B_W_1, |
| EVEX_LEN_0F3A43_W_0, EVEX_LEN_0F3A43_W_1 EVEX_W_0F3819, |
| EVEX_W_0F381A, EVEX_W_0F381B, EVEX_W_0F385A, EVEX_W_0F385B, |
| EVEX_W_0F38C7_R_1_M_0, EVEX_W_0F38C7_R_2_M_0, |
| EVEX_W_0F38C7_R_5_M_0, EVEX_W_0F38C7_R_6_M_0, |
| EVEX_W_0F3A18, EVEX_W_0F3A19, EVEX_W_0F3A1A, EVEX_W_0F3A1B, |
| EVEX_W_0F3A23, EVEX_W_0F3A38, EVEX_W_0F3A39, EVEX_W_0F3A3A, |
| EVEX_W_0F3A3B, EVEX_W_0F3A43): Delete. |
| REG_EVEX_0F38C6_M_0_L_2, REG_EVEX_0F38C7_M_0_L_2_W_0, |
| REG_EVEX_0F38C7_M_0_L_2_W_1, MOD_EVEX_0F381A, |
| MOD_EVEX_0F381B, MOD_EVEX_0F385A, MOD_EVEX_0F385B, |
| MOD_EVEX_0F38C6, MOD_EVEX_0F38C7 EVEX_LEN_0F3819, |
| EVEX_LEN_0F381A_M_0, EVEX_LEN_0F381B_M_0, |
| EVEX_LEN_0F385A_M_0, EVEX_LEN_0F385B_M_0, |
| EVEX_LEN_0F38C6_M_0, EVEX_LEN_0F38C7_M_0, |
| EVEX_LEN_0F3A18, EVEX_LEN_0F3A19, EVEX_LEN_0F3A1A, |
| EVEX_LEN_0F3A1B, EVEX_LEN_0F3A23, EVEX_LEN_0F3A38, |
| EVEX_LEN_0F3A39, EVEX_LEN_0F3A3A, EVEX_LEN_0F3A3B, |
| EVEX_LEN_0F3A43, EVEX_W_0F3819_L_n, EVEX_W_0F381A_M_0_L_n, |
| EVEX_W_0F381B_M_0_L_2, EVEX_W_0F385A_M_0_L_n, |
| EVEX_W_0F385B_M_0_L_2, EVEX_W_0F38C7_M_0_L_2, |
| EVEX_W_0F3A18_L_n, EVEX_W_0F3A19_L_n, EVEX_W_0F3A1A_L_2, |
| EVEX_W_0F3A1B_L_2, EVEX_W_0F3A23_L_n, EVEX_W_0F3A38_L_n, |
| EVEX_W_0F3A39_L_n, EVEX_W_0F3A3A_L_2, EVEX_W_0F3A3B_L_2, |
| EVEX_W_0F3A43_L_n): New. |
| * i386-dis-evex.h (evex_table): Adjust opcode 0F3819, 0F381A, |
| 0F381B, 0F385A, 0F385B, 0F38C7, 0F3A18, 0F3A19, 0F3A1A, 0F3A1B, |
| 0F3A23, 0F3A38, 0F3A39, 0F3A3A, 0F3A3B, and 0F3A43 entries. |
| * i386-dis-evex-len.h (evex_len_table): Link to vex_w_table[] |
| for opcodes 0F3819, 0F381A, 0F381B, 0F385A, 0F385B, 0F38C7, |
| 0F3A18, 0F3A19, 0F3A1A, 0F3A1B, 0F3A23, 0F3A38, 0F3A39, 0F3A3A, |
| 0F3A3B, and 0F3A43. Link to reg_table[] for opcodes 0F38C6. |
| * i386-dis-evex-mod.h: Adjust opcode 0F381A, 0F381B, 0F385A, |
| 0F385B, 0F38C6, and 0F38C7 entries. |
| * i386-dis-evex-reg.h: No longer link to mod_table[] for opcodes |
| 0F38C6 and 0F38C7. |
| * i386-dis-evex-w.h: No longer link to evex_len_table[] for |
| opcodes 0F3819, 0F38C7, 0F3A18, 0F3A19, 0F3A1A, 0F3A1B, 0F3A23, |
| 0F3A38, 0F3A39, 0F3A3A, 0F3A3B, and 0F3A43. No longer link to |
| evex_len_table[] for opcodes 0F381A, 0F381B, 0F385A, and 0F385B. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (MOD_VEX_W_0_0F41_P_0_LEN_1, |
| MOD_VEX_W_1_0F41_P_0_LEN_1, MOD_VEX_W_0_0F41_P_2_LEN_1, |
| MOD_VEX_W_1_0F41_P_2_LEN_1, MOD_VEX_W_0_0F42_P_0_LEN_1, |
| MOD_VEX_W_1_0F42_P_0_LEN_1, MOD_VEX_W_0_0F42_P_2_LEN_1, |
| MOD_VEX_W_1_0F42_P_2_LEN_1, MOD_VEX_W_0_0F44_P_0_LEN_1, |
| MOD_VEX_W_1_0F44_P_0_LEN_1, MOD_VEX_W_0_0F44_P_2_LEN_1, |
| MOD_VEX_W_1_0F44_P_2_LEN_1, MOD_VEX_W_0_0F45_P_0_LEN_1, |
| MOD_VEX_W_1_0F45_P_0_LEN_1, MOD_VEX_W_0_0F45_P_2_LEN_1, |
| MOD_VEX_W_1_0F45_P_2_LEN_1, MOD_VEX_W_0_0F46_P_0_LEN_1, |
| MOD_VEX_W_1_0F46_P_0_LEN_1, MOD_VEX_W_0_0F46_P_2_LEN_1, |
| MOD_VEX_W_1_0F46_P_2_LEN_1, MOD_VEX_W_0_0F47_P_0_LEN_1, |
| MOD_VEX_W_1_0F47_P_0_LEN_1, MOD_VEX_W_0_0F47_P_2_LEN_1, |
| MOD_VEX_W_1_0F47_P_2_LEN_1, MOD_VEX_W_0_0F4A_P_0_LEN_1, |
| MOD_VEX_W_1_0F4A_P_0_LEN_1, MOD_VEX_W_0_0F4A_P_2_LEN_1, |
| MOD_VEX_W_1_0F4A_P_2_LEN_1, MOD_VEX_W_0_0F4B_P_0_LEN_1, |
| MOD_VEX_W_1_0F4B_P_0_LEN_1, MOD_VEX_W_0_0F4B_P_2_LEN_1, |
| MOD_VEX_W_0_0F91_P_0_LEN_0, MOD_VEX_W_1_0F91_P_0_LEN_0, |
| MOD_VEX_W_0_0F91_P_2_LEN_0, MOD_VEX_W_1_0F91_P_2_LEN_0, |
| MOD_VEX_W_0_0F92_P_0_LEN_0, MOD_VEX_W_0_0F92_P_2_LEN_0, |
| MOD_VEX_0F92_P_3_LEN_0, MOD_VEX_W_0_0F93_P_0_LEN_0, |
| MOD_VEX_W_0_0F93_P_2_LEN_0, MOD_VEX_0F93_P_3_LEN_0, |
| MOD_VEX_W_0_0F98_P_0_LEN_0, MOD_VEX_W_1_0F98_P_0_LEN_0, |
| MOD_VEX_W_0_0F98_P_2_LEN_0, MOD_VEX_W_1_0F98_P_2_LEN_0, |
| MOD_VEX_W_0_0F99_P_0_LEN_0, MOD_VEX_W_1_0F99_P_0_LEN_0, |
| MOD_VEX_W_0_0F99_P_2_LEN_0, MOD_VEX_W_1_0F99_P_2_LEN_0, |
| PREFIX_VEX_0F41, PREFIX_VEX_0F42, PREFIX_VEX_0F44, |
| PREFIX_VEX_0F45, PREFIX_VEX_0F46, PREFIX_VEX_0F47, |
| PREFIX_VEX_0F4A, PREFIX_VEX_0F4B, PREFIX_VEX_0F90, |
| PREFIX_VEX_0F91, PREFIX_VEX_0F92, PREFIX_VEX_0F93, |
| PREFIX_VEX_0F98, PREFIX_VEX_0F99, VEX_LEN_0F41_P_0, |
| VEX_LEN_0F41_P_2, VEX_LEN_0F42_P_0, VEX_LEN_0F42_P_2, |
| VEX_LEN_0F44_P_0, VEX_LEN_0F44_P_2, VEX_LEN_0F45_P_0, |
| VEX_LEN_0F45_P_2, VEX_LEN_0F46_P_0, VEX_LEN_0F46_P_2, |
| VEX_LEN_0F47_P_0, VEX_LEN_0F47_P_2, VEX_LEN_0F4A_P_0, |
| VEX_LEN_0F4A_P_2, VEX_LEN_0F4B_P_0, VEX_LEN_0F4B_P_2, |
| VEX_LEN_0F90_P_0, VEX_LEN_0F90_P_2, VEX_LEN_0F91_P_0, |
| VEX_LEN_0F91_P_2, VEX_LEN_0F92_P_0, VEX_LEN_0F92_P_2, |
| VEX_LEN_0F92_P_3, VEX_LEN_0F93_P_0, VEX_LEN_0F93_P_2, |
| VEX_LEN_0F93_P_3, VEX_LEN_0F98_P_0, VEX_LEN_0F98_P_2, |
| VEX_LEN_0F99_P_0, VEX_LEN_0F99_P_2, VEX_W_0F41_P_0_LEN_1, |
| VEX_W_0F41_P_2_LEN_1, VEX_W_0F42_P_0_LEN_1, |
| VEX_W_0F42_P_2_LEN_1, VEX_W_0F44_P_0_LEN_0, |
| VEX_W_0F44_P_2_LEN_0, VEX_W_0F45_P_0_LEN_1, |
| VEX_W_0F45_P_2_LEN_1, VEX_W_0F46_P_0_LEN_1, |
| VEX_W_0F46_P_2_LEN_1, VEX_W_0F47_P_0_LEN_1, |
| VEX_W_0F47_P_2_LEN_1, VEX_W_0F4A_P_0_LEN_1, |
| VEX_W_0F4A_P_2_LEN_1, VEX_W_0F4B_P_0_LEN_1, |
| VEX_W_0F4B_P_2_LEN_1, VEX_W_0F90_P_0_LEN_0, |
| VEX_W_0F90_P_2_LEN_0, VEX_W_0F91_P_0_LEN_0, |
| VEX_W_0F91_P_2_LEN_0, VEX_W_0F92_P_0_LEN_0, |
| VEX_W_0F92_P_2_LEN_0, VEX_W_0F93_P_0_LEN_0, |
| VEX_W_0F93_P_2_LEN_0, VEX_W_0F98_P_0_LEN_0, |
| VEX_W_0F98_P_2_LEN_0, VEX_W_0F99_P_0_LEN_0, |
| VEX_W_0F99_P_2_LEN_0): Delete. |
| MOD_VEX_0F41_L_1, MOD_VEX_0F42_L_1, MOD_VEX_0F44_L_0, |
| MOD_VEX_0F45_L_1, MOD_VEX_0F46_L_1, MOD_VEX_0F47_L_1, |
| MOD_VEX_0F4A_L_1, MOD_VEX_0F4B_L_1, MOD_VEX_0F91_L_0, |
| MOD_VEX_0F92_L_0, MOD_VEX_0F93_L_0, MOD_VEX_0F98_L_0, |
| MOD_VEX_0F99_L_0, PREFIX_VEX_0F41_L_1_M_1_W_0, |
| PREFIX_VEX_0F41_L_1_M_1_W_1, PREFIX_VEX_0F42_L_1_M_1_W_0, |
| PREFIX_VEX_0F42_L_1_M_1_W_1, PREFIX_VEX_0F44_L_0_M_1_W_0, |
| PREFIX_VEX_0F44_L_0_M_1_W_1, PREFIX_VEX_0F45_L_1_M_1_W_0, |
| PREFIX_VEX_0F45_L_1_M_1_W_1, PREFIX_VEX_0F46_L_1_M_1_W_0, |
| PREFIX_VEX_0F46_L_1_M_1_W_1, PREFIX_VEX_0F47_L_1_M_1_W_0, |
| PREFIX_VEX_0F47_L_1_M_1_W_1, PREFIX_VEX_0F4A_L_1_M_1_W_0, |
| PREFIX_VEX_0F4A_L_1_M_1_W_1, PREFIX_VEX_0F4B_L_1_M_1_W_0, |
| PREFIX_VEX_0F4B_L_1_M_1_W_1, PREFIX_VEX_0F90_L_0_W_0, |
| PREFIX_VEX_0F90_L_0_W_1, PREFIX_VEX_0F91_L_0_M_0_W_0, |
| PREFIX_VEX_0F91_L_0_M_0_W_1, PREFIX_VEX_0F92_L_0_M_1_W_0, |
| PREFIX_VEX_0F92_L_0_M_1_W_1, PREFIX_VEX_0F93_L_0_M_1_W_0, |
| PREFIX_VEX_0F93_L_0_M_1_W_1, PREFIX_VEX_0F98_L_0_M_1_W_0, |
| PREFIX_VEX_0F98_L_0_M_1_W_1, PREFIX_VEX_0F99_L_0_M_1_W_0, |
| PREFIX_VEX_0F99_L_0_M_1_W_1, VEX_LEN_0F41, VEX_LEN_0F42, |
| VEX_LEN_0F44, VEX_LEN_0F45, VEX_LEN_0F46, VEX_LEN_0F47, |
| VEX_LEN_0F4A, VEX_LEN_0F4B, VEX_LEN_0F90, VEX_LEN_0F91, |
| VEX_LEN_0F92, VEX_LEN_0F93, VEX_LEN_0F98, VEX_LEN_0F99, |
| VEX_W_0F41_L_1_M_1, VEX_W_0F42_L_1_M_1, VEX_W_0F44_L_0_M_1, |
| VEX_W_0F45_L_1_M_1, VEX_W_0F46_L_1_M_1, VEX_W_0F47_L_1_M_1, |
| VEX_W_0F4A_L_1_M_1, VEX_W_0F4B_L_1_M_1, VEX_W_0F90_L_0, |
| VEX_W_0F91_L_0_M_0, VEX_W_0F92_L_0_M_1, VEX_W_0F93_L_0_M_1, |
| VEX_W_0F98_L_0_M_1, VEX_W_0F99_L_0_M_1): New. |
| (prefix_table): No longer link to vex_len_table[] for opcodes |
| 0F41, 0F42, 0F44, 0F45, 0F46, 0F47, 0F4A, 0F4B, 0F90, 0F91, |
| 0F92, 0F93, 0F98, and 0F99. |
| (vex_table): Link to vex_len_table[] for opcodes 0F41, 0F42, |
| 0F44, 0F45, 0F46, 0F47, 0F4A, 0F4B, 0F90, 0F91, 0F92, 0F93, |
| 0F98, and 0F99. |
| (vex_len_table): Link to mod_table[] for opcodes 0F41, 0F42, |
| 0F44, 0F45, 0F46, 0F47, 0F4A, 0F4B, 0F90, 0F91, 0F92, 0F93, |
| 0F98, and 0F99. |
| (vex_w_table): Link to prefix_table[] for opcodes 0F41, 0F42, |
| 0F44, 0F45, 0F46, 0F47, 0F4A, 0F4B, 0F90, 0F91, 0F92, 0F93, |
| 0F98, and 0F99. |
| (mod_table): Link to vex_w_table[] for opcodes 0F41, 0F42, |
| 0F44, 0F45, 0F46, 0F47, 0F4A, 0F4B, 0F90, 0F91, 0F92, 0F93, |
| 0F98, and 0F99. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (VEX_REG_0F71, VEX_REG_0F72, VEX_REG_0F73): |
| Rename to REG_VEX_0F71_M_0, REG_VEX_0F72_M_0, and |
| REG_VEX_0F73_M_0 respectively. |
| (MOD_VEX_0F71_REG_2, MOD_VEX_0F71_REG_4, MOD_VEX_0F71_REG_6, |
| MOD_VEX_0F72_REG_2, MOD_VEX_0F72_REG_4, MOD_VEX_0F72_REG_6, |
| MOD_VEX_0F73_REG_2, MOD_VEX_0F73_REG_3, MOD_VEX_0F73_REG_6, |
| MOD_VEX_0F73_REG_7): Delete. |
| (MOD_VEX_0F71, MOD_VEX_0F72, MOD_VEX_0F73): New. |
| (PREFIX_VEX_0F38F5, PREFIX_VEX_0F38F6, PREFIX_VEX_0F38F7, |
| PREFIX_VEX_0F3AF0): Rename to PREFIX_VEX_0F38F5_L_0, |
| PREFIX_VEX_0F38F6_L_0, PREFIX_VEX_0F38F7_L_0, |
| PREFIX_VEX_0F3AF0_L_0 respectively. |
| (VEX_LEN_0F38F3_R_1, VEX_LEN_0F38F3_R_2, VEX_LEN_0F38F3_R_3, |
| VEX_LEN_0F38F5_P_0, VEX_LEN_0F38F5_P_1, VEX_LEN_0F38F5_P_3, |
| VEX_LEN_0F38F6_P_3, VEX_LEN_0F38F7_P_0, VEX_LEN_0F38F7_P_1, |
| VEX_LEN_0F38F7_P_2, VEX_LEN_0F38F7_P_3): Delete. |
| (VEX_LEN_0F38F3, VEX_LEN_0F38F5, VEX_LEN_0F38F6, |
| VEX_LEN_0F38F7): New. |
| (VEX_LEN_0F3AF0_P_3): Rename to VEX_LEN_0F3AF0. |
| (reg_table): No longer link to mod_table[] for VEX opcodes 0F71, |
| 0F72, and 0F73. No longer link to vex_len_table[] for opcode |
| 0F38F3. |
| (prefix_table): No longer link to vex_len_table[] for opcodes |
| 0F38F5, 0F38F6, 0F38F7, and 0F3AF0. |
| (vex_table): Link to mod_table[] for opcodes 0F71, 0F72, and |
| 0F73. Link to vex_len_table[] for opcodes 0F38F3, 0F38F5, |
| 0F38F6, 0F38F7, and 0F3AF0. |
| (vex_len_table): Link to reg_table[] for opcode 0F38F3. Link to |
| prefix_table[] for opcodes 0F38F5, 0F38F6, 0F38F7, and 0F3AF0. |
| (mod_table): Link to reg_table[] for VEX opcodes 0F71, 0F72, and |
| 0F73. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (REG_0F71, REG_0F72, REG_0F73): Rename to |
| REG_0F71_MOD_0, REG_0F72_MOD_0, and REG_0F73_MOD_0 respectively. |
| (MOD_0F71_REG_2, MOD_0F71_REG_4, MOD_0F71_REG_6, MOD_0F72_REG_2, |
| MOD_0F72_REG_4, MOD_0F72_REG_6, MOD_0F73_REG_2, MOD_0F73_REG_3, |
| MOD_0F73_REG_6, MOD_0F73_REG_7): Delete. |
| (MOD_0F71, MOD_0F72, MOD_0F73): New. |
| (dis386_twobyte): Link to mod_table[] for opcodes 71, 72, and |
| 73. |
| (reg_table): No longer link to mod_table[] for opcodes 0F71, |
| 0F72, and 0F73. |
| (mod_table): Link to reg_table[] for opcodes 0F71, 0F72, and |
| 0F73. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (MOD_0F18_REG_4, MOD_0F18_REG_5, |
| MOD_0F18_REG_6, MOD_0F18_REG_7): Delete. |
| (reg_table): Don't link to mod_table[] where not needed. Add |
| PREFIX_IGNORED to nop entries. |
| (prefix_table): Replace PREFIX_OPCODE in nop entries. |
| (mod_table): Add nop entries next to prefetch ones. Drop |
| MOD_0F18_REG_4, MOD_0F18_REG_5, MOD_0F18_REG_6, and |
| MOD_0F18_REG_7 entries. Add PREFIX_IGNORED to nop entries. |
| (rm_table): Add PREFIX_IGNORED to nop entries. Drop |
| PREFIX_OPCODE from endbr* entries. |
| (get_valid_dis386): Also consider entry's name when zapping |
| vindex. |
| (print_insn): Handle PREFIX_IGNORED. |
| |
| 2021-03-09 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-gen.c (opcode_modifiers): Delete NoTrackPrefixOk, |
| IsLockable, RepPrefixOk, and HLEPrefixOk elements. Add PrefixOk |
| element. |
| * opcodes/i386-opc.h (NoTrackPrefixOk, IsLockable, HLEPrefixNone, |
| HLEPrefixLock, HLEPrefixAny, HLEPrefixRelease): Delete. |
| (PrefixNone, PrefixRep, PrefixHLERelease, PrefixNoTrack, |
| PrefixLock, PrefixHLELock, PrefixHLEAny): Define. |
| (struct i386_opcode_modifier): Delete notrackprefixok, |
| islockable, hleprefixok, and repprefixok fields. Add prefixok |
| field. |
| * opcodes/i386-opc.tbl (RepPrefixOk, LockPrefixOk, HLEPrefixAny, |
| HLEPrefixLock, HLEPrefixRelease, NoTrackPrefixOk): Define. |
| (mov, xchg, add, inc, sub, dec, sbb, and, or, xor, adc, neg, |
| not, btc, btr, bts, xadd, cmpxchg, cmpxchg8b, movq, cmpxchg16b): |
| Replace HLEPrefixOk. |
| * opcodes/i386-tbl.h: Re-generate. |
| |
| 2021-03-09 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-dis.c (dis386_twobyte): Add %LQ to sysexit. |
| * opcodes/i386-opc.tbl (sysexit): Drop No_lSuf and No_qSuf from |
| 64-bit form. |
| * opcodes/i386-tbl.h: Re-generate. |
| |
| 2021-03-03 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (output_i386_opcode): Don't get operand count. Look |
| for {} instead of {0}. Don't look for '0'. |
| * i386-opc.tbl: Drop operand count field. Drop redundant operand |
| size specifiers. |
| |
| 2021-02-19 Nelson Chu <nelson.chu@sifive.com> |
| |
| PR 27158 |
| * riscv-dis.c (print_insn_args): Updated encoding macros. |
| * riscv-opc.c (MASK_RVC_IMM): defined to ENCODE_CITYPE_IMM. |
| (match_c_addi16sp): Updated encoding macros. |
| (match_c_lui): Likewise. |
| (match_c_lui_with_hint): Likewise. |
| (match_c_addi4spn): Likewise. |
| (match_c_slli): Likewise. |
| (match_slli_as_c_slli): Likewise. |
| (match_c_slli64): Likewise. |
| (match_srxi_as_c_srxi): Likewise. |
| (riscv_insn_types): Added .insn css/cl/cs. |
| |
| 2021-02-18 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-dis.c: Included cpu-riscv.h, and removed elfxx-riscv.h. |
| (default_priv_spec): Updated type to riscv_spec_class. |
| (parse_riscv_dis_option): Updated. |
| * riscv-opc.c: Moved stuff and make the file tidy. |
| |
| 2021-02-17 Alan Modra <amodra@gmail.com> |
| |
| * wasm32-dis.c: Include limits.h. |
| (CHAR_BIT): Provide backup define. |
| (wasm_read_leb128): Use CHAR_BIT to size "result" in bits. |
| Correct signed overflow checking. |
| |
| 2021-02-16 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl: Split CVTPI2PD template. Add SSE2AVX variant. |
| * i386-tbl.h: Re-generate. |
| |
| 2021-02-16 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (set_bitfield): Don't look for CpuFP, Mmword, nor |
| Oword. |
| * i386-opc.tbl (CpuFP, Mmword, Oword): Define. |
| |
| 2021-02-15 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * s390-mkopc.c (main): Accept arch14 as cpu string. |
| * s390-opc.txt: Add new arch14 instructions. |
| |
| 2021-02-04 Nick Alcock <nick.alcock@oracle.com> |
| |
| * configure.ac (SHARED_LIBADD): Remove explicit -lintl population in |
| favour of LIBINTL. |
| * configure: Regenerated. |
| |
| 2021-02-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * tic54x-dis.c (sprint_mmr): Change to tic54x_mmregs. |
| * tic54x-opc.c (regs): Rename to ... |
| (tic54x_regs): ... this. |
| (mmregs): Rename to ... |
| (tic54x_mmregs): ... this. |
| (condition_codes): Rename to ... |
| (tic54x_condition_codes): ... this. |
| (cc2_codes): Rename to ... |
| (tic54x_cc2_codes): ... this. |
| (cc3_codes): Rename to ... |
| (tic54x_cc3_codes): ... this. |
| (status_bits): Rename to ... |
| (tic54x_status_bits): ... this. |
| (misc_symbols): Rename to ... |
| (tic54x_misc_symbols): ... this. |
| |
| 2021-02-04 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (MASK_RVB_IMM): Removed. |
| (riscv_opcodes): Removed zb* instructions. |
| (riscv_ext_version_table): Removed versions for zb*. |
| |
| 2021-01-26 Alan Modra <amodra@gmail.com> |
| |
| * i386-gen.c (parse_template): Ensure entire template_instance |
| is initialised. |
| |
| 2021-01-15 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_gpr_names_abi): Aligned the code. |
| (riscv_fpr_names_abi): Likewise. |
| (riscv_opcodes): Likewise. |
| (riscv_insn_types): Likewise. |
| |
| 2021-01-15 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-dis.c (parse_riscv_dis_option): Fix typos of message. |
| |
| 2021-01-15 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-dis.c: Comments tidy and improvement. |
| * riscv-opc.c: Likewise. |
| |
| 2021-01-13 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.in: Regenerate. |
| |
| 2021-01-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/26792 |
| * configure.ac: Use GNU_MAKE_JOBSERVER. |
| * aclocal.m4: Regenerated. |
| * configure: Likewise. |
| |
| 2021-01-12 Nick Clifton <nickc@redhat.com> |
| |
| * po/sr.po: Updated Serbian translation. |
| |
| 2021-01-11 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/27173 |
| * configure: Regenerated. |
| |
| 2021-01-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * aarch64-asm-2.c: Regenerate. |
| * aarch64-dis-2.c: Likewise. |
| * aarch64-opc-2.c: Likewise. |
| * aarch64-opc.c (aarch64_print_operand): |
| Delete handling of AARCH64_OPND_CSRE_CSR. |
| * aarch64-tbl.h (aarch64_feature_csre): Delete. |
| (CSRE): Likewise. |
| (_CSRE_INSN): Likewise. |
| (aarch64_opcode_table): Delete csr. |
| |
| 2021-01-11 Nick Clifton <nickc@redhat.com> |
| |
| * po/de.po: Updated German translation. |
| * po/fr.po: Updated French translation. |
| * po/pt_BR.po: Updated Brazilian Portuguese translation. |
| * po/sv.po: Updated Swedish translation. |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2021-01-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure: Regenerated. |
| |
| 2021-01-09 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2021-01-09 Nick Clifton <nickc@redhat.com> |
| |
| * 2.36 release branch crated. |
| |
| 2021-01-08 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (insert_dw, (extract_dw): New functions. |
| (DW, (XRC_MASK): Define. |
| (powerpc_opcodes) <hashchk, hashchkp, hashst, haststp>: New mnemonics. |
| |
| 2021-01-09 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2021-01-08 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated Swedish translation. |
| |
| 2021-01-08 Nick Clifton <nickc@redhat.com> |
| |
| PR 27129 |
| * aarch64-dis.c (determine_disassembling_preference): Move call to |
| aarch64_match_operands_constraint outside of the assertion. |
| * aarch64-asm.c (aarch64_ins_limm_1): Remove call to assert. |
| Replace with a return of FALSE. |
| |
| PR 27139 |
| * aarch64-opc.c (aarch64_sys_regs): Treat id_aa64mmfr2_el1 as a |
| core system register. |
| |
| 2021-01-07 Samuel Thibault <samuel.thibault@gnu.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-07 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po: Updated French translation. |
| |
| 2021-01-07 Fredrik Noring <noring@nocrew.org> |
| |
| * m68k-opc.c (chkl): Change minimum architecture requirement to |
| m68020. |
| |
| 2021-01-07 Philipp Tomsich <prt@gnu.org> |
| |
| * riscv-opc.c (riscv_opcodes): Add pause hint instruction. |
| |
| 2021-01-07 Claire Xenia Wolf <claire@symbioticeda.com> |
| Jim Wilson <jimw@sifive.com> |
| Andrew Waterman <andrew@sifive.com> |
| Maxim Blinov <maxim.blinov@embecosm.com> |
| Kito Cheng <kito.cheng@sifive.com> |
| Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_opcodes): Add ZBA/ZBB/ZBC instructions. |
| (MASK_RVB_IMM): Used for rev8 and orc.b encoding. |
| |
| 2021-01-01 Alan Modra <amodra@gmail.com> |
| |
| Update year range in copyright notice of all files. |
| |
| For older changes see ChangeLog-2020 |
| |
| Copyright (C) 2021-2024 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
