| Fri Dec 31 14:33:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * nindy-share/nindy.c: Fix order of arguments to store_unsigned_integer |
| (second and third arguments were reversed). |
| (say): Use varargs. |
| |
| Fri Dec 31 12:13:47 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * remote-mips.c: Add timeout parameter to mips_request and |
| mips_receive_packet. |
| (callers): pass in mips_receive_wait except mips_initialize (where |
| we use it to clean up the kludge where we had been changing |
| mips_receive_wait temporarily) and mips_wait (where we pass in |
| -1 for no timeout). |
| |
| Fri Dec 31 14:33:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stack.c (print_block_frame_locals): Also print LOC_BASEREG variables. |
| |
| Fri Dec 31 06:55:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * symtab.c (find_methods): Call fprintf_symbol_filtered with DMGL_ANSI. |
| |
| Thu Dec 30 10:16:54 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * values.c (unpack_long): Fix garbled error message. |
| |
| * remote-mips.c (mips_error): New function. |
| * remote-mips.c: Use it instead of error() most places. |
| * remote-mips.c (mips_receive_packet): New arg throw_error. |
| (mips_initialize): Use it not catch_errors. |
| * defs.h: Declare error_pre_print and warning_pre_print here... |
| * main.c: ...not here. |
| |
| * breakpoint.c (breakpoint_chain): Make static. |
| * breakpoint.c, breakpoint.h (frame_in_dummy): New function. |
| * stack.c (print_frame_info): Use it. |
| |
| Thu Dec 30 07:41:36 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * exec.c (add_to_section_table): Check for SEC_ALLOC instead of |
| SEC_LOAD to handle .bss segments properly. |
| |
| Thu Dec 30 10:16:54 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * infrun.c (wait_for_inferior): Enable code which assumes that if |
| we jump into the prologue from another function, then it was a |
| subroutine call. #if 0 AT_FUNCTION_START; the above code should |
| take care of this case. |
| |
| Wed Dec 29 12:32:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * valprint.c (val_print_string): Change chunksize from 200 |
| to 8. |
| |
| * symfile.c (generic_load): If no arguments, get file name |
| from get_exec_file. |
| |
| * c-exp.y: Revert Kung's change. "..." is not a type, and the |
| change caused "p (...)0" to dump core. |
| * gdbtypes.c (check_stub_method): Don't pass "..." to |
| parse_and_eval_type. This should fix the bug which Kung was |
| trying to fix. |
| |
| * stabsread.c (define_symbol): If we choose not to combine |
| two symbols, don't just ignore the second (LOC_REGISTER) one. |
| * printcmd.c (print_frame_args): If we have a LOC_ARG and a |
| LOC_REGISTER, use the LOC_ARG not the LOC_REGISTER. |
| |
| Tue Dec 28 15:08:00 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * solib.c (DEBUG_BASE): Remove macro and all references. |
| * solib.c (debug_base_symbols): Add array of symbols to lookup. |
| * solib.c (IGNORE_FIRST_LINK_MAP_ENTRY): Add macro. |
| * solib.c (look_for_base, locate_base): Use debug_base_symbols. |
| * solib.c (find_solib): Use IGNORE_FIRST_LINK_MAP_ENTRY. |
| |
| Tue Dec 28 12:06:57 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * c-exp.y : fix grammar to parse ellipsis (...) |
| |
| Mon Dec 27 18:42:14 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * stabsread.c (read_type): fix problem when reading static member |
| of a class. caused by change to allow :: inside template |
| instantiated name. |
| |
| Mon Dec 27 11:07:05 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * gdbtypes.h: Expand on comments for TYPE_CODE_BITSTRING and |
| TYPE_CODE_STRING a bit. |
| |
| * m68k-tdep.c (m68k_skip_prologue, m68k_find_saved_regs): |
| Allow pea %fp; move.l %sp, %fp instead of link instruction to |
| set up the new frame. |
| |
| * main.c (init_main): Change "set remotedebug" back to var_zinteger |
| from var_boolean. |
| |
| * c-exp.y (yylex): Don't try to deal with nested types. |
| |
| * cp-valprint.c (cplus_print_value): Call check_stub_type on |
| TYPE_BASECLASS (type, i) before we look at its name. |
| |
| * dbxread.c: Move default definition of GCC_COMPILED_FLAG_SYMBOL |
| from here . . . |
| * symtab.h: . . . to here. |
| * dbxread.c (record_minimal_symbol): Move check for gcc{,2}_compiled. |
| and __gnu_compiled* from here . . . |
| * minsyms.c (prim_record_minimal_symbol_and_info): . . . to here. |
| * minsyms.c (prim_record_minimal_symbol): Call |
| prim_record_minimal_symbol_and_info rather than duplicating code. |
| * minsyms.c, symtab.h (prim_record_minimal_symbol{,_and_info}), |
| coffread.c (record_minimal_symbol), |
| xcoffread.c (RECORD_MINIMAL_SYMBOL), callers: Add objfile parameter. |
| |
| Sun Dec 26 20:44:02 1993 Jeffrey A. Law (law@snake.cs.utah.edu) |
| |
| * dbxread.c (process_one_symbol): Handle stabs-in-som just like |
| stabs-in-elf. |
| (pastab_build_psymtabs): Likewise. |
| |
| * hppa-tdep.c: Change all comments to reference %r3 or frame |
| pointer rather than %r4. |
| (frame_chain, skip_prologue, dig_rp_from_stack): Handle %r3 as the |
| frame pointer. |
| |
| * config/pa/tm-hppa.h (FP_REGNUM): Define as %r3. |
| (FIND_FRAME_SAVED_REGS): Handle %r3 as frame pointer. |
| (CALL_DUMMY): Likewise. |
| |
| Sun Dec 26 16:59:39 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * exec.c (exec_file_command): If error occurs after we have opened |
| exec_bfd but before we call push_target, make sure to close exec_bfd. |
| |
| * infrun.c (wait_for_inferior): Remove confusing and inaccurate |
| stuff about subroutine calls, return, etc., from comment which |
| says "We've wandered out of the step range.". |
| |
| Sun Dec 26 09:18:10 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * infrun.c (wait_for_inferior): When checking whether the line has |
| changed, check the symtab as well. |
| |
| Sun Dec 26 09:18:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * gdbtypes.c (force_to_range_type): Use switch statement. |
| complain() not warning() if the TYPE_CODE isn't one we know how to |
| deal with gracefully. Use builtin_type_int not |
| lookup_fundamental_type (the objfile we passed to |
| lookup_fundamental_type was sometimes NULL). |
| |
| * valops.c (call_function_by_hand, push_word), defs.h (push_word), |
| convex-xdep.c, m88k-nat.c, i386m3-nat.c, mips-tdep.c, mipsm3-nat.c, |
| ns32km3-nat.c, remote-bug.c, m88k-tdep.c, remote-hms.c, remote-mips.c, |
| config/gould/tm-np1.h, hppa-tdep.c (hppa_fix_call_dummy), remote-vx.c: |
| Use REGISTER_SIZE, unsigned LONGEST, and |
| {store,extract}_unsigned_integer, instead of sizeof |
| (REGISTER_TYPE) and REGISTER_TYPE. |
| * All tm.h files: Change REGISTER_TYPE to REGISTER_SIZE. |
| * hppa-tdep.c (pa_print_fp_reg): Remove unused variable val. |
| |
| * Makefile.in (ALLDEPFILES): Remove i386ly-nat.c and m68kly-nat.c. |
| Add lynx-nat.c. |
| |
| Sat Dec 25 20:05:41 1993 Jeffrey A. Law (law@snake.cs.utah.edu) |
| |
| * hppa-tdep.c (init_extra_frame_info): Correctly adjust the base |
| of the current frame when "fromleaf" is true. Do not adjust the |
| frame base of the innermost frame if it is a leaf function. |
| |
| Sat Dec 25 13:39:21 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c (define_symbol): Only combine a p/r pair into a |
| LOC_REGPARM if REG_STRUCT_HAS_ADDR. |
| |
| Sat Dec 25 09:50:29 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * valops.c (value_struct_elt): Check for (value)-1 return from |
| search_struct_method. |
| |
| Sat Dec 25 09:50:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * defs.h: Move definitions of TARGET_*_BIT after include of tm.h. |
| The old way (using #undef in tm.h) was ugly and asking for |
| trouble, because it makes it possible for some file to use the |
| wrong definition. Move definition of HOST_CHAR_BIT after definition |
| of TARGET_CHAR_BIT. |
| * config/alpha/tm-alpha.h, config/h8300/tm-h8300.h, |
| config/h8500/tm-h8500.h, config/z8k/tm-z8k.h: Don't undef TARGET_*_BIT |
| before defining them. |
| |
| * mdebugread.c: Change the builtin_type_* in this file to |
| mdebug_type_* and make them static. Use TYPE_CODE_ERROR for |
| complex and float decimal. |
| |
| * printcmd.c (disassemble_command): Call wrap_here between printing |
| address and printing instruction. |
| |
| Fri Dec 24 14:23:57 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c (read_type): Don't fall through 'S' case (the case it |
| was falling though happened to do the right thing ("break;") but that |
| is hardly a good thing to assume). |
| |
| Tue Dec 21 13:32:02 1993 Per Bothner (bothner@kalessin.cygnus.com) |
| |
| * ch-exp.y (match_dollar_tokens): Fix off-by-one bug. |
| * ch-lang.c (chill_is_varying_struct), ch-lang.h: New function. |
| * ch-lang.c (chill_printstr): Use double quotes, not single quotes. |
| * ch-typeprint.c (chill_type_print_base): Handle TYPE_CODE_BITSTRING. |
| Improve printing of TYPE_CODE_STRING, TYPE_CODE_SET, and |
| TYPE_CODE_STRUCT (including checking chill_is_varying_struct). |
| Print TYPE_DUMMY_RANGE by printing its TYPE_TARGET_TYPE. |
| Handle TYPE_CODE_ENUM. |
| * ch-valprint.c (chill_val_print): Handle TYPE_CODE_BITSTRING. |
| For TYPE_CODE_STRING, never print address. Handle VARYING strings. |
| * gdbtypes.c (force_to_range_type): New. |
| * gdbtypes.c (create_set_type): Make work, following Chill layout. |
| * gdbtypes.h (TYPE_LOW_BOUND, TYPE_HIGH_BOUND, TYPE_DUMMY_RANGE): New. |
| * stabsread.c (read_type): Distinguish string and bitstring from |
| char-array and set. |
| * valarith.c (value_subscript), valops.c (value_coerce_array): |
| Handle STRINGs as well as ARRAYs. |
| * valarith.c (value_bit_index): Fix think. Use new macros. |
| |
| |
| Fri Dec 17 10:45:32 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * symtab (decode_line_1): fix a bug when position char is not |
| set correctly. |
| * c-valprint (c_val_print): handle vtbl printing when vtbl is not |
| set up yet. |
| |
| Thu Dec 16 16:46:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-tdep.c (read_next_frame_reg): If SIGFRAME_REG_SIZE is not |
| defined, define it as 4. |
| |
| Thu Dec 16 13:08:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu) |
| |
| * config/m68k/nm-hp300bsd.h: Correctly identify 4.3BSD vs 4.4BSD. |
| |
| * config/m68k/tm-hp300bsd.h (REMOTE_BPT_VECTOR): Define. |
| |
| * config/m68k/tm-m68k.h (REMOTE_BPT_VECTOR): Allow targets to |
| override. |
| (REMOTE_BREAKPOINT): Likewise. |
| |
| Thu Dec 16 09:14:58 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c (read_hp_function_type): Correctly handle |
| pass-by-value structures > 64bits in size. |
| (process_one_debug_symbol): Likewise. |
| |
| Mon Dec 13 20:17:39 1993 Per Bothner (bothner@kalessin.cygnus.com) |
| |
| Implement support for Chill POWERSETs. |
| * ch-exp.y (operand_2): Implement 'Element IN PowerSet'. |
| * ch-typeprint.c (chill_type_print_base): Handle POWERSETs. |
| * ch-valprint.c (chill_val_print): Handle TYPE_CODE_SET. |
| * eval.c (evaluate_subexp): Implement BINOP_IN. |
| * expression.h (enum exp_opcode): Added BINOP_IN. |
| * gdbtypes.c (create_set_type), gdbtypes.h: New function. |
| * stabsread.c (read_type): If 'S', create a set type. |
| * valarith.c (value_bit_index, value_in), value.h: New functions, |
| for indexing in SETs. |
| |
| Mon Dec 13 06:42:37 1993 Jeffrey A. Law (law@snake.cs.utah.edu) |
| |
| * paread.c (pa_symfile_init): Check for the existance of stabs |
| after DBX_TEXT_SECT has been initialized. |
| |
| Tue Nov 23 17:29:28 1993 Steve Chamberlain (sac@jonny.cygnus.com) |
| |
| * config/h8300/tm-h8300.h (BREAKPOINT): Insn changed to sleep. |
| (DECP_PC_AFTER_BREAK): Now is 0. |
| * config/h8500/tm-h8500.h (REGISTER_BYTES, REGISTER_BYTE, |
| REGISTER_NAMES): update to new view. (INIT_EXTRA_FRAME_INFO): No |
| extra frame info now. |
| * config/sh/sh.h (NOP): Define NOP insn. |
| * config/z8k/tm-z8k.h (BIG): is now sim_z8001_mode. |
| * config/z8k/z8ksim.mt (TDEPFILES): Add remote-sim.o to list. |
| * ser-go32.c: Lint. (strncasecmp): Removed, now in libiberty. |
| (go32_readchar): Special handling for faster polling. (async |
| structure): Volatile. |
| * h8300-tdep.c (print_register_hook): Allocate and use the right |
| number bytes for the raw register. |
| * h8500-tdep.c (regoff, frame_find_saved_reg, examine_prologue): |
| deleted. (h8500_register_size, h8500_register_virtual_type, ): |
| Use new way of counting registers. |
| * remote-e7000.c (echo_index): deleted. (expect): Better handling |
| of user interrupts. (expect_prompt): Remove never used log file |
| support. (want, want_nopc): Add support for H8/300H. |
| (fetch_regs_from_dump): Treat \r and \n as whitespace. |
| (e7000_drain): Send an "end" command before waiting for output to |
| stop. (e7000_wait): Cope with H8/300H, better handling of user |
| interrupts. (why_stop, expect_n, sub2_from_pc): New function. |
| * remote-utils.c (gr_load_image): call fflush and QUIT more regularly. |
| * utils.c (notice_quit): New function for polling for user interrupts. |
| |
| Fri Dec 10 15:53:56 1993 Per Bothner (bothner@kalessin.cygnus.com) |
| |
| * stabsread.c (read_array_type): Allow negative array bounds, |
| without interpreting that to mean "adjustable." |
| * ch-valprint.c (chill_val_print): Handle RANGE types. |
| * ch-typeprint.c (chill_type_print_base): Handle BOOL. |
| Handle variant records. Handle RANGE types. |
| |
| Tue Dec 7 15:41:32 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * config/mips/idt.mt: Use tm-idt.h instead of tm-bigmips.h. |
| * config/mips/idtl.mt: Use tm-idtl.h instead of tm-mips.h. |
| * config/mips/tm-idt.h, config/mips/tm-idtl.h: New files; use |
| different BREAKPOINT value for IDT. |
| |
| * mipsread.c: Include bfd.h and coff/sym.h. |
| |
| Mon Dec 6 16:34:10 1993 K. Richard Pixley (rich@cygnus.com) |
| |
| * ser-unix.c (set_tty_state): set the rest of the terminal state |
| pieces. |
| |
| Mon Dec 6 12:01:37 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * configure.in: Recognize mips* for all mips targets. |
| (mips*el-*-elf*, mips*-*-elf*): New targets; use idt and idtl. |
| |
| Added Irix 5 support. |
| * configure.in (mips-sgi-irix5*): New host and target. Use irix5 |
| for both. |
| * config/mips/irix5.mh, config/mips/irix5.mt, |
| config/mips/xm-irix5.h, config/mips/nm-irix5.h, |
| config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support. |
| * mdebugread.c: New file, split out of mipsread.c. Added |
| elfmdebug_build_psymtabs routine. Added some checks on external |
| symbols. Changed code to keep ecoff_debug_info and |
| ecoff_debug_swap structs in the psymtab and in global pointers |
| rather than retrieving them from the bfd. Also changed to keep |
| the pending list with the psymtab rather than the objfile (each |
| psymtab for a single objfile points to the same pending list). |
| * mipsread.c: Bulk of file moved into mdebugread.c, leaving just |
| the sym_fns. |
| * Makefile.in (SFILES): Added mdebugread.c. |
| (OBS): Added mdebugread.o. |
| (mdebugread.o): New target. |
| * symfile.h: Declare mdebug_build_psymtabs and |
| elfmdebug_build_psymtabs. |
| * elfread.c (struct elfinfo): Added mdebugsect field. |
| (elf_locate_sections): Remember location of .mdebug section. |
| (elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug |
| section. |
| * infrun.c (AT_FUNCTION_START): Set to 0 if not already defined. |
| (wait_for_inferior): Use AT_FUNCTION_START if it is defined to see |
| if PC is at the start of a function. |
| * mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and |
| give it a default definition. |
| (mips_skip_prologue): Skip instructions which initialize $gp |
| register. |
| (in_sigtramp): New procedure, moved in from mipsread.c. |
| * config/mips/tm-mips.h: Declare in_sigtramp. |
| |
| * serial.h (serial_fdopen): Make parameter const to match |
| function definition. |
| |
| Fri Dec 3 14:20:43 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * config/mips/irix4.mh: Enable ser-tcp.o. |
| |
| Tue Nov 30 15:24:24 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * Makefile.in (check): Do not use subdir_do, so that |
| TARGET_FLAGS_TO_PASS is used correctly. |
| |
| Mon Nov 29 16:10:38 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * i386-nlmstub.c: Undo I/O redirection changes by Tom Lord. |
| These definitely won't work under Netware. |
| |
| Mon Nov 29 15:34:58 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * stabsread.c(read_struct_field): Fix the check when getting to |
| member functions. |
| |
| Mon Nov 29 16:48:16 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| gcc -Wall -O lint: |
| * mips-tdep.c (heuristic_proc_desc): Initialize reg30 to avoid |
| warning. Unnest comment. |
| (init_extra_frame_info): Remove unused variable mask. |
| (MASK): Fully parenthesize. |
| (mips_push_dummy_frame): Remove unused variable val. |
| (mips_skip_prologue): Remove unused variables f and b. |
| |
| Mon Nov 29 12:23:25 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (parse_symbol, parse_partial_symbols): Do not create |
| (partial) symbols for opaque struct definitions. |
| |
| Mon Nov 29 11:36:57 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * i386ly-tdep.c (i386lynx_saved_pc_after_call): Change call_inst |
| to unsigned char to avoid domain warning for some values. |
| |
| Mon Nov 22 23:42:59 1993 Steve Chamberlain (sac@jonny.cygnus.com) |
| |
| * remote-e7000.c (e7000_wait): Cope with H8/300 register dump. |
| * config/h8300/h8300hms.mt: Add remote-e7000. |
| |
| Mon Nov 22 11:03:45 1993 Fred Fish (fnf@cygnus.com) |
| |
| Merged changes from kev@spuds.geg.mot.com (Kevin A. Buettner): |
| * gdb/config/m88k/delta88.mh (NATDEPFILES): Added corelow.o and |
| coredep.o to this list. |
| * gdb/m88k-nat.c (m88k_register_u_addr): Avoid error when passed |
| the number for an M88110 extended register by just returning the |
| address of r0. |
| |
| Sat Nov 20 09:20:51 1993 Fred Fish (fnf@rtl.cygnus.com) |
| |
| * go32-xdep.c (re_comp, re_exec): Remove stubs now that gdb |
| always uses it's own version of regex. |
| |
| Fri Nov 19 18:23:19 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * valops.c(value_struct_elt_for_reference): enhance search operator in |
| c++. |
| * symtab.c(decode_line_1): same as above. |
| |
| Fri Nov 19 15:08:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * symtab.c (decode_line_1): Add comment about use of |
| return_to_top_level directly instead of error. Add comment saying |
| that the '' should not be needed--that the completer should be fixed. |
| |
| Fri Nov 19 11:00:33 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * symtab.c(decode_line_1): fix the inconsistency of setting |
| breakpoint with '' or without them. The '' is needed when you |
| want name completion. |
| |
| Thu Nov 18 08:25:50 1993 Fred Fish (fnf@cygnus.com) |
| |
| * valprint.c (val_print_string): When looking for a null |
| terminator compare current bufsize to fetchlimit to determine |
| when to stop, instead of computing buffer+fetchlimit which |
| may overflow for very large limits (like "unlimited"). |
| |
| Wed Nov 17 18:23:09 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * eval.c(evaluate_subexp): to use unified search so type conversion |
| operator works in calling method. |
| * valarith.c(value_x_binop, value_x_unop): same as above. |
| * valops.c(search_struct_method): same as above. |
| |
| Wed Nov 17 18:47:34 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mipsread.c: Change use of ECOFF information to correspond to |
| changes in bfd/libecoff.h. |
| (mipscoff_symfile_offsets): Made static. |
| |
| Wed Nov 17 09:43:31 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * valops.c (typecmp): improve prototype matching when calling |
| a method. Make 'p (*(ostream *) &cout) << "lll" ' to work. |
| * eval.c(evalute_subexp): fix operator search problem when call |
| like p x.'operator+'(i). |
| |
| Tue Nov 16 17:15:03 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * i386ly-nat.c, i386lynx-nat.c, m68kly-nat.c: Remove. Move |
| common code into lynx-nat.c. |
| * lynx-nat.c: New module. Contains portable code for Lynx native |
| stuff (mostly ptrace related). |
| * config/i386/i386lynx.mh (NATDEPFILES): i386ly-nat.o -> lynx-nat.o |
| * config/m68k/m68klynx.mh (NATDEPFILES): i386ly-nat.o -> lynx-nat.o |
| |
| * config/nm-lynx.h, config/tm-lynx.h: New files to contain |
| non-architecture specific native and target defs. |
| * config/i386/nm-i386lynx.h, config/i386/tm-i386lynx.h, |
| config/m68k/nm-m68klynx.h, config/m68k/tm-m68klynx.h: Move all |
| (arch) portable stuff into ../{tm nm}-lynx.h. |
| |
| Tue Nov 16 13:33:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * symtab.c (gdb_mangle_name): Only assume that the physname is |
| the entire mangled name if it looks like the mangled name of a |
| constructor. Needed for testsuite to work with GCC 2.4.5. |
| |
| * a68v-nat.c: Replace with new version from Troy Rollo. The |
| version I am replacing appears to be an old copy of sun3-nat.c. |
| * dstread.c (dst_symfile_read): Replace sort_all_symtab_syms call |
| with loop. |
| |
| * Makefile.in (TAGS): Depend on TAGFILES_{NO,WITH}_SRCDIR. |
| |
| * Makefile.in: (HFILES,TAGFILES): Split into _WITH_SRCDIR and |
| _NO_SRCDIR versions. |
| (TAGS): Only add srcdir to TAGFILES_NO_SRCDIR. |
| (This is part of a long saga involving me putting srcdir on |
| everything (perhaps for now-obsolete reasons, I forget), Rich |
| removing the srcdir from everything, Stu putting it back some |
| places for Sun make, and me just now getting around to fixing |
| `make TAGS' again). |
| |
| Mon Nov 15 12:29:10 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * stack.c(print_frame_info): print demangled function name |
| ansi style. |
| |
| Mon Nov 15 14:32:29 1993 Steve Chamberlain (sac@jonny.cygnus.com) |
| |
| * remote-e7000.c: New file to cope with the Hitachi E7000 ICE. |
| * remote-utils.c, remote-utils.h (gr_load_image): New function to |
| download to target. |
| * h8300-tdep.c, h8500-tdep.c, remote-z8k.c, sh-tdep.c z8k-tdep.c |
| (sim_load): delete. |
| * remote-sim.c (gdbsim_load): Use gr_load_image, rather than |
| sim_load. |
| * config/sh/sh.mt: Add remote-e7000 |
| |
| Mon Nov 15 11:38:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/i386/linux.mh: Remove XM_CLIBS, TERMLIB, SYSV_DEFINE, and |
| REGEX. |
| * config/i386/xm-linux.h: Don't include xm-i386v.h. Define |
| HOST_BYTE_ORDER ourselves. Define HAVE_TERMIOS not HAVE_TERMIO. |
| Define NEED_POSIX_SETPGID. Include unistd.h. |
| |
| Mon Nov 15 12:29:10 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * symtab.c(gdb_mangle_name): fix the problem with constructor |
| name mangling. |
| |
| Mon Nov 15 11:38:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * gdbtypes.h: Add TYPE_FLAG_TARGET_STUB. |
| * gdbtypes.c (check_stub_type): On TYPE_FLAG_TARGET_STUB, do |
| what cleanup_undefined_types does for arrays, except we clear |
| TYPE_FLAG_TARGET_STUB if we fix up the type. |
| * stabsread.c (cleanup_undefined_types): Add comments about how |
| doing arrays here is no longer the clean way to do it. |
| (read_array_type): Set TYPE_FLAG_TARGET_STUB as well as calling |
| add_undefined_type. |
| * c-typeprint.c, ch-typeprint.c: Move call to check_stub_type |
| outside switch so it happens for all type codes. |
| * cp-valprint.c (cp_print_value_fields): Recurse to val_print, |
| instead of c_val_print, so that check_stub_type gets called. |
| |
| * gdbtypes.h, gdbtypes.c, m2-lang.c, ch-lang.c, c-lang.c: Remove |
| TYPE_FLAG_SIGNED. It was inconsistently set, never checked |
| (except in recursive_dump_type), and is pointless. |
| |
| Mon Nov 15 00:40:38 1993 Jeffrey A. Law (law@snake.cs.utah.edu) |
| |
| * paread.c (pa_symfile_init): Look for the $TEXT$ section rather |
| than the .text section. |
| |
| Sun Nov 14 00:28:13 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c: Remove #if 0'd dbx_class_complaint. We now handle |
| this (more or less) gracefully, and complain() was never a good |
| way of dealing with this. |
| |
| * stabsread.c (read_type): Skip the colon when reading a |
| cross-reference. Only complain, not error_type, on unrecognized |
| cross-reference types. error_type, not dump core, if the colon is |
| missing. |
| |
| Fri Nov 12 16:23:08 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * config/m68k/tm-sun3.h: Disable use of alternate breakpoint insn |
| when doing remote stuff. |
| |
| Fri Nov 12 16:22:39 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * c-exp.y (yylex): Call lookup_symtab not lookup_partial_symtab. |
| |
| * partial-stab.h: Ignore ':' symbol descriptors. Same case as |
| Kung's stabsread.c change. |
| |
| Fri Nov 12 11:18:02 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * stabsread.c (patch_block_stabs, define_symbol, read_type): in |
| g++ template instantiation, nested class can be part of the |
| params, and '::' can gets into symbol or type names. This is |
| to fix the problem. |
| |
| * gdbtypes.c (lookup_struct_elt_type): Handle type ref or pointer |
| to struct/union case. |
| |
| Fri Nov 12 10:39:31 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * coff-solib.c (coff_solib_add): Cast result of alloca(). |
| * m68k-tdep.c (m68k_saved_pc_after_call): Get rid of |
| GDB_TARGET_IS_SUN3. Use more general SYSCALL_TRAP macro. |
| * config/m68k/m68klynx.mh (NATDEPFILES): Remove exec.o (it's |
| already in TDEPFILES). |
| * config/m68k/tm-m68k.h (SAVED_PC_AFTER_CALL): Use |
| m68k_saved_pc_after_call. |
| * Remove all Sun3 specific stuff. |
| * (FIX_CALL_DUMMY): Cast arg to bfd_putb32 to unsigned char *. |
| * config/m68k/tm-m68klynx.h: Define SYSCALL_TRAP as trap #10. |
| Disable REMOTE_BREAKPOINT mechanism. |
| * config/m68k/tm-sun3.h: Get rid of GDB_TARGET_IS_SUN3. |
| * Protect from multiple includion. |
| * Move Sun3 specific stuff from tm-m68k.h to here. |
| * Define SYSCALL_TRAP as trap #0. |
| * Remove def of SAVED_PC_AFTER_CALL (now in tm-m68k.h). |
| * gdbserver/low-lynx.c: Redo all register store/fetch stuff to |
| make it portable for 386 and 68k. |
| |
| Fri Nov 12 09:53:26 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * mips-tdep.c (init_extra_frame_info): Check to see whether the |
| registers mentioned in the proc_desc have been saved. This |
| generalizes mips_in_lenient_prologue in the sense that we keep |
| searching until we've found saves for all the registers, not just |
| look for a "lenient prologue" pattern. |
| * mips-tdep.c: #if 0 lenient prologue code. |
| |
| * mips-tdep.c (heuristic_proc_desc): Don't assume a host short |
| is 16 bits. |
| |
| Thu Nov 11 19:58:05 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/i386/i386sol2.mh: Comment out corelow.o. |
| |
| * printcmd.c (address_info): Use filtered, not unfiltered functions. |
| We should be able to deal with a QUIT here. |
| |
| Thu Nov 11 15:22:20 1993 Jeffrey A. Law (law@snake.cs.utah.edu) |
| |
| * printcmd.c (address_info): Use fprintf_symbol_filtered |
| to print the symbol name. |
| |
| * stabsread.c (define_symbol): Handle cfront lossage for |
| struct/union/enums and typedefs. |
| |
| * partial-stab.h (case N_BINCL): Update psymtab_language |
| as appropriate when changing subfiles. |
| (case N_SOL): Update psymtab_language as appropriate when |
| changing subfiles. Add typedef for structs, unions, and enums |
| when processing C++ files. |
| |
| Thu Nov 11 13:18:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * README: Remove information on languages and just cite the (newly |
| updated) information in doc/gdb.texinfo instead. |
| |
| * delta68-nat.c: Fix typos (add missing ");" and stuct -> struct). |
| |
| Wed Nov 10 09:31:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * dbxread.c (process_one_symbol, N_RBRAC): Don't clear |
| within_function just because local_symbols is NULL. It appears |
| that this bug has existed since the 10 Apr 89 change which started |
| clearing within_function here. |
| |
| * config/m68k/tm-m68k.h: Clean up CALL_DUMMY comment. |
| * config/m68k/{tm-hp300bsd.h,tm-hp300hpux.h,tm-m68k-em.h, |
| tm-monitor.h,tm-sun3.h,tm-vx68.h}, config/sparc/tm-sparc.h: |
| Define BELIEVE_PCC_PROMOTION. |
| * dbxread.c: Remove BELIEVE_PCC_PROMOTION define. The code which |
| used this was moved to stabsread.c a long time ago. |
| |
| * dstread.c (dst_sym_fns): Update for flavours. |
| * symfile.c (find_sym_fns): Add kludge for apollo like for rs/6000. |
| * dstread.c (dst_symfile_offsets): Set objfile->num_sections. |
| |
| gcc -Wall lint: |
| * thread.c: Include "gdbcmd.h" and <ctype.h>. |
| * Makefile.in: Update dependency. |
| * thread.c (thread_command): Remove unused variable p. |
| * values.c (unpack_double): Use len instead of TYPE_LENGTH (type). |
| * valprint.c (print_floating): Correctly check sign bit now that |
| we are using unsigned arithmetic. |
| * symtab.c (find_pc_line_range): Remove unused variables exact_match, |
| ind, and l. |
| |
| Tue Nov 9 17:42:25 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * valarith.c (value_x_binop): fix search operator in class bug |
| * valarith.c (value_x_unop): fix search operator in class bug |
| |
| Tue Nov 9 19:20:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in (init.c): Add udi2go32.o to list of files that we |
| should not try to search for _initialize_* functions. |
| |
| * remote-udi.c (udi_wait): Change UDIGdb_StdoutReady back to |
| UDIStdoutReady. It accidentally got changed on 24 Oct 93 when |
| stdout was changed to gdb_stdout. Likewise for UDIGetStdout, |
| UDIStderrReady, and UDIGetStderr. |
| |
| Tue Nov 9 12:48:06 1993 Tom Lord (lord@cygnus.com) |
| |
| * remote-hms.c (hms_wait): fixed too many arguments to putc_unfiltered. |
| |
| Tue Nov 9 12:20:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * utils.c (quit): Also call gdb_flush on standard output and error. |
| |
| * .gdbinit: Remove "source /.gdbinit". It causes a spurious error |
| if /.gdbinit doesn't exist (and I know of no convention of putting |
| something in /.gdbinit). |
| |
| Mon Nov 8 18:17:11 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * cp-valprint.c (cp_print_value_fields): change output from <no |
| value> to <optimized out or zero length> |
| |
| Mon Nov 08 17:05:30 1993 Jeffrey Wheat (cassidy@cygnus.com) |
| |
| * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS |
| Change RUNTEST = runtest to test for existance of |
| a runtest in the source tree first. |
| |
| Mon Nov 8 10:42:03 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in: Remove unused variable GCC. Remove "#CC=cc" line |
| which doesn't really relate to anything. |
| |
| * Makefile.in (CC_FOR_TARGET): Test for existence of gcc/xgcc, not |
| for existence of gcc/Makefile. |
| |
| * inflow.c (terminal_init_inferior), infptrace.c (child_resume): |
| Add comments about use of Lynx PIDGET and how we will want to |
| clean it up. |
| |
| * stabsread.c: Remove long_kludge_name code (it was already #if 0). |
| * stabsread.c (read_one_struct_field): Clean up comments to reflect |
| Kung's change of 5 Nov 93. |
| * stabsread.c (read_one_struct_field): Don't give up on unknown |
| visibility character, just shove it in fip->list->visibility. |
| (read_baseclasses): Don't give up on unknown virtual or visibility |
| characters, just assume a reasonable default, complain, and keep |
| going. |
| (attach_fields_to_type): Complain on unrecognized visibility. |
| One result of all this is that '9' (VISIBILITY_IGNORE) can be used |
| in a stab as well as being something which GDB uses internally. |
| |
| Mon Nov 8 07:57:30 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * configure.in: Remove h8300h, we have multilib now. |
| |
| Mon Nov 8 06:11:24 1993 D. V. Henkel-Wallace (gumby@cirdan.cygnus.com) |
| |
| * configure.in: Add unixware as a configuration alias for x86 |
| sysv4 |
| |
| * config/i386/i386nw.mt: add i387-tdep.o, exec.o to TDEPFILES |
| |
| Sun Nov 7 23:49:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * symtab.c (decode_line_1, decode_line_2): Do not adjust pc by |
| FUNCTION_START_OFFSET if funfirstline is not set. |
| |
| Fri Nov 5 17:19:30 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * gdbtypes.h : add a field 'ignore_field_bits in cplus_specific, |
| and macros to handle the bits. |
| * stabsread.c (read_one_struct_field): add VISIBILITY_IGNORE, and |
| for field of length 0, set this bit on. |
| * cp-valprint.c (cp_print_value_fields): for VISIBILITY_IGNORE |
| field, print <no value>. |
| |
| Fri Nov 5 14:43:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Version 4.11.2. |
| |
| Fri Nov 5 09:49:22 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * inflow.c (terminal_init_inferior): Temporarily use Lynx PIDGET |
| macro to set process groups. |
| * infptrace.c (child_resume): Temporarily use Lynx PIDGET to |
| specify resumption of all threads. |
| * infrun.c (wait_for_inferior): Fix handling of thread-specific |
| breakpoints for systems where DECR_PC_AFTER_BREAK > 0 (ie: backup |
| PC by the right amount when continuing the thread). |
| * thread.c (thread_apply_command): Add the `thread apply' |
| command to apply a given GDB command to a list of threads. |
| |
| Fri Nov 5 05:58:03 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * Makefile.in (init.c): Don't call sed if filename is empty. |
| |
| Thu Nov 4 08:27:24 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * dbxread.c (unknown_symchar_complaint): Make message refer to |
| "symbol descriptor" not "symbol type character" for consistency |
| with stabs.texinfo terminology. |
| |
| * stabsread.c (read_struct_fields): Accept either '$' or '.' as |
| the character which introduces a cpp_abbrev or anonymous type. |
| |
| * c-lang.c (c_printstr): Print "" to stream (like all the other |
| output from this function), not gdb_stdout. |
| |
| * dbxread.c (process_one_symbol): Do relocate 'S' symbols by |
| the text offset (revert 12 Oct 93 change). |
| |
| * configure.in: Make hppa*-*-hiux* use hppahpux, |
| not non-existent hppahiux. |
| |
| Wed Nov 3 16:24:09 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * values.c (value_fn_field): when physical name not found, do not |
| error, but return null. |
| * valops.c (value_struct_elt): when name and args match does not |
| mean it is the one, some times a typedef class can have the same |
| member method and args. This probably will not happen with new |
| version of g++, but it does happen in old g++ and cause gdb error. |
| |
| Wed Nov 3 09:20:18 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| Merge changes for dos x udi: |
| * Makefile.in (udi2go32.o): add rule to build this file |
| * 29k-share/udi/udi2go32.c: new file |
| * config/a29k/a29k-udi.mt: add udi2go32.o |
| * 29k-share/udi/{udr.c, udip2soc.c}: #ifdef out the entire file |
| if __GO32__ is defined. What a hack. |
| |
| Wed Nov 3 09:20:18 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote.c (putpkt, getpkt): Don't call interrupt_query. |
| |
| * findvar.c (value_of_register): Rename val to reg_val to avoid |
| name conflict with some (e.g. tm-m68k.h) REGISTER_CONVERT_TO_VIRTUAL. |
| |
| * main.c: Add variables source_line_number, source_file_name, |
| source_error, source_error_allocated, and source_pre_error. |
| (command_line_input): If source_file_name set, increment |
| source_line_number and set error_pre_print with them. |
| (source_command): Set source_* and make a cleanup so they get |
| set back. |
| |
| Tue Nov 2 16:28:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stack.c (down_silently_command): Add comment about PR 1913. |
| |
| * breakpoint.c (insert_breakpoints, delete_breakpoint): Call |
| target_terminal_ours_for_output before attempting output. |
| |
| * fork-child.c (fork_inferior): Fix comment so that it suggests |
| "set shell" rather than having "set env SHELL" affect GDB's |
| operation. |
| |
| Tue Nov 2 15:03:08 1993 Tom Lord (lord@rtl.cygnus.com) |
| |
| * utils.c (vfprintf_unfiltered): don't use maybe_filtered |
| since it involves a fixed size buffer. |
| |
| Tue Nov 2 13:42:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * findvar.c (value_of_register, value_from_register), |
| hppa-tdep.c (pa_print_fp_reg), infcmd.c (do_registers_info), |
| valops.c (value_assign): Use REGISTER_CONVERT_TO_* only if |
| REGISTER_CONVERTIBLE is defined, otherwise just copy the content. |
| Pass desired type to REGISTER_CONVERT_TO_*. |
| |
| * config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*): |
| Pass length of desired type to store/extract_floating. |
| * config/i386/tm-arm.h, config/i386/tm-i386aix.h, |
| config/i386/tm-sun386.h, config/i386/tm-symmetry.h, |
| config/m88k/tm-m88k.h config/rs6000/tm-rs6000.h (REGISTER_CONVERT_*): |
| Use extract_floating and store_floating with length of desired type. |
| * config/m68k/tm-news.h (STORE,EXTRACT_RETURN_VALUE): Add type |
| parameter to REGISTER_CONVERT_*. |
| |
| * config/a29k/tm-a29k.h, config/convex/tm-convex.h, |
| config/gould/tm-np1.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h, |
| config/h8500/tm-h8500.h, config/i386/tm-i386v.h, |
| config/mips/tm-mips.h, config/ns32k/tm-merlin.h, |
| config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h, |
| config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/tahoe/tm-tahoe.h, |
| config/vax/tm-vax.h, config/z8k/tm-z8k.h (REGISTER_CONVERTIBLE, |
| REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL): Remove |
| versions for which REGISTER_CONVERTIBLE is always false. |
| * z8k-tdep.c (register_convert_to_virtual, register_convert_to_raw): |
| Remove, no longer used. |
| |
| * alpha-tdep.c (alpha_register_convert_to_raw, |
| alpha_register_convert_to_virtual): New routines to handle |
| the different raw formats in alpha floating point registers. |
| * config/alpha/tm-alpha.h (REGISTER_CONVERTIBLE, |
| REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Use them. |
| |
| Tue Nov 2 12:45:23 1993 Stan Shebs (shebs@rtl.cygnus.com) |
| |
| * gdbserver/configure.in: Recognize *-*-lynxos* instead of |
| *-*-lynx*, recognize sparc-*-lynxos*. |
| * gdbserver/Makefile.in (install, install_only): Add. |
| * gdbserver/gdbserver.1: New file, man page for gdbserver. |
| |
| Tue Nov 2 03:01:01 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c: Include <time.h> and <sys/types.h>. Change include |
| of "libhppa.h" to "som.h". |
| (BYTES_IN_WORD): Define. |
| (hppa_sym_fns): "hppa" is 4 characters, not 5. |
| |
| Mon Nov 1 09:40:21 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * symtab.c, symtab.h, source.c: Change find_line_pc_range to take |
| a struct symtab_and_line argument, rather than a symtab and a line. |
| Re-write it to be based on the address rather than bogusly adding |
| one to the line number and hoping that has something to do with the |
| end of the line. |
| |
| * config/m88k/m88k.mh (NATDEPFILES): Remove exec.o. |
| |
| * paread.c (pa_symtab_read): Change comments to say ignoring |
| labels really should be handled by the assembler/compiler. |
| |
| * Makefile.in: Add -O to CXXFLAGS. |
| |
| * TODO: Expand comments on fast watchpoints. |
| |
| Sun Oct 31 19:45:06 1993 Jeffrey A. Law (law@snake.cs.utah.edu) |
| |
| * paread.c (pa_symtab_read): Also filter out local symbols |
| starting with "L$". |
| |
| Sun Oct 31 09:28:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * symfile.h (sym_fns), symfile.c (find_sym_fns), xcoffread.c, |
| coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, paread.c: |
| Change from using bfd target name to using the flavour. |
| |
| * objfiles.h, infcmd.c, symfile.c: Add comments about how various |
| objfiles get created and when we should blow them away. |
| |
| Sat Oct 30 08:32:53 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * symfile.c (reread_symbols): When re-reading symbols, do all the |
| right operations ourself, rather than calling symbol_file_command. |
| If we re-read something, call clear_symtab_users not just |
| breakpoint_re_set. |
| * objfiles.h, objfiles.c (build_objfile_section_table): No longer |
| static. |
| * symfile.c (clear_symtab_users): Call clear_pc_function_cache. |
| * coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, paread.c |
| (*_symfile_offsets): Set objfile->num_sections. |
| * remote.c (remote_wait), symfile.c (syms_from_objfile): |
| Don't muck with objfile->num_sections now that all the symbol |
| readers set it. |
| * elfread.c: Clean up obsolete comment about handling only DWARF. |
| * paread.c: Remove comment about how we should use an "ordinary" |
| file format with an hppa suffix. There is nothing ordinary about SOM. |
| |
| * config/i386/{i386m3.mh,i386mk.mh}, config/mips/mipsm3.mh, |
| config/ns32k/ns32km3.mh: Change MMALLOC_LIB to MMALLOC. |
| * TODO: Update Mach stuff. |
| |
| Fri Oct 29 16:30:36 1993 Stan Shebs (shebs@rtl.cygnus.com) |
| |
| LynxOS support: |
| * configure.in: Change *-*-lynx* to *-*-lynxos*, add |
| sparc-*-lynxos*. |
| * Makefile.in (ALLDEPFILES): Add m68kly-nat.c, sparcly-nat.c. |
| Rename i386lynx-nat.[co] to i386ly-nat.[co]. |
| (ALLCONFIG): Add config/{m68k,sparc}/{m68k,sparc}lynx.m[ht]. |
| (m68kly-nat.o, sparcly-nat.o): Add rules. |
| * i386ly-tdep.c: Cosmetics. |
| * i386lynx-nat.c: Removed. |
| * i386ly-nat.c: New file, was i386lynx-nat.c. |
| * m68kly-nat.c: New file. |
| * sparcly-nat.c: New file. |
| * config/xm-lynx.h: New file, cpu-independent host info. |
| * config/i386/i386lynx.mh: Changes for consistency. |
| * config/i386/i386lynx.mt: Ditto. |
| * config/i386/tm-i386lynx.h: Ditto. |
| * config/i386/nm-i386lynx.h: Ditto. |
| * config/i386/xm-i386lynx.h: Include config/xm-lynx.h. |
| * config/m68k/m68klynx.mh, config/m68k/m68klynx.mt, |
| config/m68k/tm-m68klynx.h, config/m68k/nm-m68klynx.h, |
| config/m68k/xm-m68klynx.h: New files, M68K LynxOS support. |
| * config/sparc/sparclynx.mh, config/sparc/sparclynx.mt, |
| config/sparc/tm-sparclynx.h, config/sparc/nm-sparclynx.h, |
| config/sparc/xm-sparclynx.h: New files, Sparc LynxOS support. |
| |
| Fri Oct 29 08:11:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * defs.h, findvar.c (extract_floating, store_floating): New functions. |
| * Move SWAP_TARGET_AND_HOST from defs.h to findvar.c because it is |
| now used only by extract_floating and store_floating. |
| * valprint.c (print_floating): Use unsigned arithmetic. Use |
| extract_unsigned_integer instead of SWAP_TARGET_AND_HOST. |
| Change sizeof (float) to 4 and sizeof (double) to 8 (those are always |
| the relevant sizes for this code, which is in #ifdef IEEE_FLOAT). |
| * values.c (unpack_long, unpack_double, value_from_double), |
| valarith.c (value_binop), stabsread.c (define_symbol): |
| Use extract_floating and store_floating instead of |
| SWAP_TARGET_AND_HOST. |
| * config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*): |
| Use extract_floating and store_floating. |
| * config/m88k/tm-m88k.h: Add comments (it should be doing the same). |
| * i386-tdep.c (i386_extract_return_value), |
| * remote-nindy.c (nindy_store_registers): Use store_floating. |
| |
| Fri Oct 29 09:31:38 1993 Steve Chamberlain (sac@rtl.cygnus.com) |
| |
| * remote-sim.c (gdbsim_store_register): Change var name so |
| it compiles with non-ANSI compilers. |
| |
| Fri Oct 29 08:11:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * TODO: Add idea for "disassemble" with source. |
| |
| Fri Oct 29 00:41:01 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (VERSION): Bump to 4.11.1 after release and cvs |
| tagging. |
| |
| Thu Oct 28 09:14:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * TODO: Add section on Mach. Stop calling it a "bug list". |
| Remove John's name and email address. Remove item on "always" |
| ("hook-stop" takes care of this). Remove item on executables with |
| no symbols (this works on some machines, at least). Remove item |
| about calling error() during symbol reading (I think all the important |
| ones have been cleaned up). Revise items about signals and remote |
| systems. Remove section on ^Z requiring several continues to make |
| it go (this now works. Perhaps the item is based on confusion over |
| programs (like GDB itself) which catch SIGTSTP and then re-send |
| themselves the signal. PR 2575 might contain relevant info). |
| |
| Thu Oct 28 16:55:34 1993 Fred Fish (fnf@cygnus.com) |
| |
| * NEWS: Note improvements in C++ support, preliminary thread |
| implementation, and LynxOS native and target support for 386. |
| |
| Thu Oct 28 16:55:34 1993 Fred Fish (fnf@cygnus.com) |
| |
| * README: Add note from Peter Schauer about OSF/1 shared |
| libraries. Add note from Pace Willisson about configuring on BSDI |
| BSD/386 release 1.0. Update gdb references to gdb 4.11. |
| |
| Thu Oct 28 09:14:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * NEWS: Add notes about Alpha and "set remotedebug" for UDI. |
| |
| * valops.c (value_assign): Change bitfield code to use a buffer of |
| the correct size, rather than an int. |
| |
| Wed Oct 27 13:43:07 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/i386/{i386m3.mt,i386m3.mh}, |
| config/mips/{mipsm3.mt,mipsm3.mh}, |
| config/ns32k/{ns32km3.mt,ns32km3.mh}: Use correct names for TM_FILE |
| and XM_FILE. Replace host files *mach3-xdep.o with native |
| files *m3-nat.o. Replace host file os-mach3.o with native |
| file m3-nat.o. |
| |
| * remote-udi.c: Remove LOG_FILE stuff; superceded by "set remotedebug". |
| * remote-mon.c: Remove commented out "set remotedebug" command. |
| * remote-nindy.c: Clean up comment about wanting alternative to |
| options specified on the GDB command line. |
| |
| * fork-child.c (fork_inferior): Set inferior_pid before calling |
| init_trace_fun. Move the code which gets us through the shell |
| to new function startup_inferior. |
| * inferior.h: Declare startup_inferior. |
| * procfs.c (procfs_init_inferior), inftarg.c (ptrace_him): |
| Call startup_inferior. |
| * m3-nat.c (m3_trace_him): Call intercept_exec_calls. |
| * config/nm-m3.h: Don't define STARTUP_INFERIOR. |
| * config/i386/tm-i386m3.h, config/ns32k/tm-ns32k.h, |
| config/mips/tm-mipsm3.h: Don't define START_INFERIOR_TRAPS_EXPECTED. |
| |
| * m68k-stub.c: Change vector 13 from SIGFPE to SIGBUS. |
| |
| Tue Oct 26 22:05:03 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * mips-tdep.c (mips_pop_frame): If proc_desc is NULL, don't dump core. |
| |
| Tue Oct 26 15:07:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| gcc -Wall lint: |
| * nlmread.c: Include stabsread.h. |
| * Makefile.in: Update dependencies. |
| |
| * remote.c: Change PBUFSIZ back to 400. John's 28 Feb 1992 change |
| to increase it broke the ability to write large chunks of memory |
| with m68k-stub and i386-stub. Now we only use more than 400 on |
| machines where we need that much to write the registers. |
| * remote.c (remote_write_bytes): Eliminate possible abort(). The |
| check for when to abort was off by a few bytes and besides which, |
| it is handled by MAXBUFBYTES, which the caller uses. |
| * m68k-stub.c: Add comments about trap #1 and trap #8 instructions. |
| |
| Tue Oct 26 08:36:07 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * remote-sim.h (SIM_ADDR): New type (same as CORE_ADDR). |
| (sim_set_pc): Update prototype. |
| (sim_read, sim_write): Ditto, and use unsigned char *buf. |
| (sim_fetch_register, sim_store_register): Use unsigned char *buf. |
| (sim_info): Pass printf function as argument, add verbose argument. |
| (sim_stop_reason): Renamed from sim_stop_signal, fix prototype. |
| * remote-sim.c (gdbsim_wait): Update call to sim_stop_reason. |
| (gdbsim_files_info): Update call to sim_info. |
| |
| Tue Oct 26 10:41:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * valops.c (value_assign): Call reinit_frame_cache when assigning |
| to a register. |
| |
| Mon Oct 25 11:08:59 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * infrun.c (wait_for_inferior): Fix PC out of objfile bounds |
| check to just use stop_func_name == 0. |
| * remote-udi.c (store_register): Invalidate NPC/PC_REGNUM after |
| changing PC. |
| |
| Mon Oct 25 14:57:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * gdbserver/{low-lynx.c,low-sparc.c,low-sun3.c}, standalone.c, |
| m3-nat.c, i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c: bcopy -> memcpy. |
| |
| gcc -Wall lint: |
| * breakpoint.c: Include thread.h. |
| * coffread.c: Include stabsread.h. |
| * Makefile.in: Update dependencies. |
| * breakpoint.c (mention): Add bp_call_dummy to switch. |
| * symmisc.c (dump_symtab): Use %d not %ld for line number. |
| |
| Sun Oct 24 18:29:32 1993 Tom Lord (lord@rtl.cygnus.com) |
| |
| * every non-obsolete file except utils.c: |
| Change the stream argument to _filtered to GDB_FILE *. |
| Change all references to stdout/stderr to gdb_stdout/gdb_stderr. |
| Replace all calls to stdio output functions with |
| calls to corresponding _unfiltered functions. |
| Replaced calls to fopen for output to gdb_fopen. |
| Added sufficient goo to utils.c and defs.h to make the above |
| work. |
| |
| The net effect is that stdio output functions are only directly |
| used in utils.c. Elsewhere, the _unfiltered and _filtered |
| functions and GDB_FILE type are used. |
| |
| In the near future, GDB_FILE will stop being equivalant to |
| FILE. |
| |
| The semantics of some commands has changed in a very subtle way: |
| called in the right context, they may cause new occurences of |
| prompt_for_continue() behavior. |
| |
| Please respect this change by not reintroducing stdio output |
| dependencies in the main body of gdb code. All output from |
| commands should go to a GDB_FILE. |
| |
| Sun Oct 24 20:16:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * parse.c, parser-defs.h (write_exp_msymbol): New function to write |
| the appropriate expression for a minimal symbol. Taken from c-exp.y |
| and m2-exp.y but handles mst_file_*. |
| * c-exp.y, m2-exp.y: Use it. |
| |
| Sun Oct 24 09:31:05 1993 Fred Fish (fnf@lisa.cygnus.com) |
| |
| * elfread.c (elf_symtab_read): Use bfd convention that both |
| initialized and uninitialized data sections have the SEC_ALLOC |
| flag bit set, but only initialized sections have SEC_LOAD set. |
| SEC_DATA is ignored since it only gets set for initialized |
| data. |
| |
| Sat Oct 23 14:48:18 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * remote-sim.h (sim_stop): New enum. |
| (sim_stop_signal): Change prototype, result is enum sim_stop. |
| * remote-sim.c (gdbsim_wait): Update call to sim_stop_signal. |
| |
| Fri Oct 22 07:49:54 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c (define_symbol): Skip the whole thing about "pcc |
| promotion" on little-endian machines. |
| |
| * remote-vx.c (vx_wait): Rename pid parameter to pid_to_wait_for. |
| Some compilers (legitimately) don't like variables in the |
| function's outermost block whose name is the the same as the name of |
| a parameter. |
| |
| Merge Apollo patches from Troy Rollo (troy@cbme.unsw.edu.au): |
| * dst.h, dstread.c, config/m68k/{apollo68b.mt,tm-apollo68b.h}: |
| New files. |
| * config/m68k/nm-apollo68b.h: Add more defines. |
| * configure.in: Recognize apollo target, not just host. |
| |
| * configure.in: Add * to end of all OS names. |
| |
| Fri Oct 22 06:14:01 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (ALLPARAM): Add config/m88k/xm-delta88v4.h |
| |
| Thu Oct 21 12:23:12 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in (init.c): Generate using the source, not munch. This |
| cleans up all kinds of hassles (which nm to use in munch, etc). The |
| new formatting conventions (mostly already followed) are that |
| the name of the _initialize_* routines must start in column zero, |
| and must not be inside #if. |
| * munch: Removed. |
| * Makefile.in: Remove references to munch. |
| * serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c, |
| alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c, |
| procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c, |
| i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c, |
| z8k-tdep.c: Make sure the above conventions are followed. Make |
| sure they are all declared as returning void. Clean up |
| miscellaneous comments and such. |
| |
| * sh-tdep.c (sim_load): Add function. |
| |
| Thu Oct 21 15:58:48 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com) |
| |
| * remote-mips.c (mips_wait): add pid argument. |
| |
| Thu Oct 21 12:23:12 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in (c-exp.tab.o): Remove notice about shift/reduce conflicts |
| which no longer occur. |
| |
| gcc -Wall lint: |
| * findvar.c (symbol_read_needs_frame), corelow.c (ignore), |
| inflow.c (gdb_has_a_terminal): Make sure to return a value. |
| * regex.h: Declare re_set_syntax. |
| * printcmd.c: Include valprint.h. |
| * infcmd.c, exec.c, maint.c, core.c: Include language.h. |
| * maint.c: Include expression.h. |
| * infrun.c, fork-child.c, corelow.c, inflow.c: Include thread.h. |
| * inftarg.c: Include command.h. |
| * coredep.c: Include value.h. |
| * c-exp.y, m2-exp.y, ch-exp.y: Include bfd.h, symfile.h and objfiles.h. |
| * ch-typeprint.c: Include typeprint.h. |
| * ch-valprint.c: Include c-lang.h. |
| * nlmread.c: Include buildsym.h. |
| * environ.c: Include gdbcore.h. Only include defs.h once. |
| (set_in_environ): Cast const char * to char * when passing to |
| set_gnutarget. |
| * Makefile.in: Update dependencies to reflect all these new includes. |
| Remove unused variables: |
| * printcmd.c (printf_command): args_to_vprintf. |
| * coffread.c (coff_symfile_init): strsection. |
| Move variables to within the #ifdefs where they are used: |
| * symtab.c (gdb_mangle_name): opname. |
| * inftarg.c (child_attach): pid and exec_file. |
| * inftarg.c (child_detach): siggnal. |
| * objfiles.c (allocate_objfile): mapto, md, and fd. |
| * objfiles.c (free_objfile): mmfd. |
| * infrun.c (wait_for_inferior): Include BPSTAT_WHAT_LAST in switch. |
| * infrun.c (wait_for_inferior): Remove unused same_pid label. |
| * inferior.h: Declare set_sigint_trap and clear_sigint_trap. |
| * parser-defs.h: Declare write_exp_elt_block. |
| * stabsread.h: Declare elfstab_offset_sections and |
| coffstab_build_psymtabs. |
| |
| Thu Oct 21 12:05:08 1993 Ken Raeburn (raeburn@cygnus.com) |
| |
| Patch from Jeff Law: |
| * paread.c: Fix references to "hppa" that should now be "som". |
| |
| Thu Oct 21 12:23:12 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * symtab.c (decode_line_1): Don't use SYMBOL_LINE for functions. |
| |
| Thu Oct 21 02:59:07 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * remote-udi.c (udi_store_registers, store_register): Use |
| UDI29KPC address space when modifying PC. It seems that you can't |
| modify the PC directly (at least in the isstip simulator). |
| |
| Wed Oct 20 11:35:43 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * target.h: Put remote_debug declaration back here. Add baud_rate. |
| * remote.c, remote-udi.c, remote-utils.h: Let target.h take care of |
| declaring these. Those random externs all over are error prone. |
| * Move "set remotebaud" from remote-utils.c to main.c to it applies |
| to remote.c as well. |
| |
| * xcoffread.c (xcoff_symfile_read), coffread.c (coff_symfile_read): |
| Sort symtabs for this objfile only, not for all objfiles. |
| * symfile.c, symfile.h (sort_all_symtab_syms): Remove; no longer used. |
| |
| * mipsread.c (parse_symbol): In third-eye, a function has a block |
| within it which represents the whole function. Create only one |
| GDB block for both. |
| |
| Wed Oct 20 17:47:42 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * main.c: Make baud_rate and remote_debug be global variables, |
| remove #include "remote-utils.h". This makes it possible to build |
| GDB without remote-utils.c. Also, move setting of remote_debug |
| into main, so that all remote*.c files can use it (not just the |
| serial line ones). And, make baud_rate be an int. |
| * remote-udi.c: Change kiodebug to remote_debug. |
| * remote-utils.c: Move setting of baud rate and debug into main.c. |
| * remote-utils.h: Redefine sr_{get set}_debug and sr_{get set}_baud |
| to use baud_rate and remote_debug globals for compatibility. |
| * remote.c: Use remote_debug and baud_rate globals directly, |
| instead of sr_ functions, so that we don't need to load |
| remote-utils.c. |
| * config/a29k/a29k-udi.mt: Define REMOTE_O as null so that we don't |
| get the default remote* modules. |
| |
| Wed Oct 20 11:35:43 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c (define_symbol): When combining a LOC_ARG and a |
| LOC_REGISTER, use the type from the LOC_REGISTER, not from the |
| LOC_ARG. |
| |
| Wed Oct 20 14:34:38 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * config/i386/xm-go32.h: define some signals if they aren't |
| already defined. |
| |
| Wed Oct 20 11:35:43 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in (INTERNAL_LDFLAGS): New macro. The new part is |
| that we use CFLAGS and PROFILE_CFLAGS to link. |
| (gdb, rapp, kdb): Use INTERNAL_LDFLAGS instead of |
| LDFLAGS and/or GLOBAL_CFLAGS. |
| |
| Wed Oct 20 09:29:55 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * Makefile.in: Add $(srcdir) to all refs to 29k-share |
| directories. |
| |
| Tue Oct 19 17:23:34 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * Makefile.in (ALLCONFIG): Add config/i386/{i386m3.mh, i386m3.mt, |
| i386/i386mk.mh i386/i386mk.mt}, config/mips/{mipsm3.mh, |
| mipsm3.mt}, config/ns32k/{ns32km3.mh, ns32m3.mt} |
| * Makefile.in (remote_utils_h): Add remote-sim.h |
| * Makefile.in (NONSRC): Add i386-nlmstub.c |
| * Makefile.in (HFILES): Add coff-solib.h |
| |
| Tue Oct 19 14:15:40 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * values.c (value_virtual_fn_field): Fix the offset calculation |
| when calling virtual functions. (gdb.t22/virtfunc.exp). |
| * eval.c (evaluate_subexp): same as above. |
| |
| Tue Oct 19 10:43:16 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/rs6000/rs6000.mh (TERMCAP): Define to -lcurses. |
| |
| * Makefile.in: Define CXXFLAGS. |
| |
| Tue Oct 19 09:28:52 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * sparclite/Makefile.in: Fixup so that this works with Sun make |
| and VPATH. |
| |
| Tue Oct 19 10:43:16 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * breakpoint.h (struct bpstat_what): Don't use bitfields. |
| |
| * typeprint.c: Add "class CLASS-NAME" to docstring for ptype. |
| |
| Tue Oct 19 06:17:10 1993 Fred Fish (fnf@cirdan.cygnus.com) |
| |
| * Makefile.in (ALLPARAM): Add config/m88k/{nm-delta88v4.h, |
| tm-delta88v4.h, xm-dgux.h}. |
| * Makefile.in (ALLCONFIG): Add config/m88k/{delta88v4.mh, |
| delta88v4.mt}. |
| |
| * README: Remove comment about SunOS 5.x programs leaving |
| coredumps. Info from Sun is that this was not in customer |
| releases. |
| |
| Mon Oct 18 10:28:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * hppa-tdep.c (restore_pc_queue): Call target_terminal_ours after |
| done stepping the inferior. |
| |
| * c-exp.y: Remove never-used (because of shift/reduce conflicts) |
| rules for pointers to members. |
| * Makefile.in: Remove notice about expected shift/reduce conflicts. |
| |
| * buildsym.c (finish_block): If we pop the context stack and it is |
| not empty, complain () instead of abort (). |
| |
| Sun Oct 17 19:42:31 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * parse.c, parser-defs.h (follow_types): New function. |
| * c-exp.y (ptype : typebase abs_decl): Use it. |
| * c-exp.y (ptype): Add support for type qualifiers after the |
| typebase. The typebase rule already has support for them before |
| the typebase. |
| * Makefile.in: Change the expected number of shift/reduce |
| conflicts to 6. This is OK--the 2 new conflicts are basically the |
| same as one of the old ones. |
| |
| Sun Oct 17 13:04:49 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (VERSION): Bump to 4.10.3. |
| |
| Sun Oct 17 09:18:57 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * infrun.c (wait_for_inferior): Clean up comments which were at |
| the top of the file, making them more concise and moving them with |
| the code (Sorry, Randy, but these stream-of-consciousness comments |
| really have to go). Switch the order of the "&&", which makes |
| things clearer and turns out to be an improvement with respect to |
| side effects and speed. |
| |
| Sun Oct 17 02:06:01 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * procfs.c: Handle process exits more elegantly by trapping on |
| entry to _exit. Also, cleanup procinfo list when process dies of |
| it's own accord (as opposed to being killed). |
| |
| Sat Oct 16 20:47:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/m88k/xm-dgux.h: Define NO_PTRACE_H. |
| |
| * corelow.c (add_to_thread_list): Need a cast to go from PTR to |
| asection *. |
| |
| * infrun.c: Add comment about signals. |
| |
| * fork-child.c (fork_inferior): Remove CREATE_INFERIOR_HOOK again. |
| Stu reinstated it (accidently I assume). |
| |
| Sat Oct 16 15:27:10 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * procfs.c (procfs_wait): Losing Unixware can't do poll on /proc |
| files. Use PIOCWSTOP instead. |
| * corelow.c (add_to_thread_list): Fix arg to match prototype. |
| |
| * procfs.c (procfs_set_sproc_trap): Don't use this if sproc |
| isn't available. |
| * (procfs_notice_signals): Fix prototype. |
| |
| Fri Oct 15 22:46:07 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * breakpoint.c (breakpoint_thread_match break_command_1): |
| Thread-specific breakpoint support. |
| * breakpoint.h (struct breakpoint): Add thread id field. |
| * fork-child.c (fork_inferior): Move call to init_thread_list() |
| back a bit so that init_trace_fun can do thread functions. |
| * hppa-tdep.c (restore_pc_queue): Add pid to call to target_wait. |
| * hppab-nat.c (child_resume): Handle default pid. |
| * hppah-nat.c (child_resume): Handle default pid. |
| * i386lynx-nat.c (child_wait): New arg pid. |
| * inflow.c (kill_command): Reset thread list. |
| * infptrace.c (child_resume): Handle default pid. |
| * infrun.c: Thread-specific breakpoint support. |
| * inftarg.c (child_wait): Add pid arg. |
| * osfsolib.c (solib_create_inferior_hook): Add pid to call to |
| target_resume. |
| * procfs.c: Multi-thread support. |
| * remote-bug.c (bug_wait): Add pid arg. |
| * remote-hms.c (hms_wait): Add pid arg. |
| * remote-mips.c (mips_wait): Add pid arg. |
| * remote-mon.c (monitor_wait): Add pid arg. |
| * remote-nindy.c (nindy_wait): Add pid arg. |
| * remote-sim.c (gdbsim_wait): Add pid arg. |
| * remote-udi.c (udi_wait): Add pid arg. |
| * remote-vx.c (vx_wait): Add pid arg. |
| * remote-z8k.c (sim_wait): Add pid arg. |
| * remote.c (remote_wait): Add pid arg. |
| * solib.c (solib_create_inferior_hook): Add pid to call to |
| target_resume. |
| * target.h (struct target_ops): Add pid arg to to_wait and |
| to_notice_signals. |
| * thread.c (valid_thread_id): New func to validate thread #s. |
| * (pid_to_thread_id): New func to do the obvious. |
| * thread.h: Prototypes for above. |
| |
| * coff-solib.c (coff_solib_add): Use nameoffset field to locate |
| filename. |
| |
| Fri Oct 15 21:29:40 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * h8300-tdep.c, h8500-tdep.c: Define sim_load only, but not |
| sim_kill, sim_open, or sim_set_args. |
| |
| * stack.c (print_stack_frame): Put catch_errors around |
| print_frame_info so (for example) error printing source doesn't |
| cause auto-displays to get skipped in normal_stop. |
| |
| * findvar.c (value_from_register): When preparing to cast a value |
| from REGISTER_VIRTUAL_TYPE to type, copy the REGISTER_VIRTUAL_SIZE; |
| the old code didn't copy the whole thing. |
| * valops.c (value_assign): Add comment. |
| |
| Fri Oct 15 12:57:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (upgrade_type): Replace bitsize sanity checks and |
| complaint by a comment explaining why they were useless. |
| |
| Fri Oct 15 14:30:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Move comments on bypassing call dummy breakpoint from stack.c |
| to breakpoint.h. |
| |
| Fri Oct 15 11:52:56 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * symtab.c (lookup_partial_symtab): If filename is not found and |
| contains no slashes, try again and compare without leading path |
| components. |
| * symtab.c (lookup_symtab_1): Replace open coded version of |
| lookup_partial_symtab with a function call. |
| |
| Thu Oct 14 20:34:15 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * fork-child.c (fork_inferior), remote-eb.c (eb_create_inferior), |
| remote-mon.c (monitor_create_inferior), remote-nindy.c |
| (nindy_create_inferior), remote-st.c (st2000_create_inferior), |
| remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it |
| is replaced by init_trace_fun. |
| * config/convex/xm-convex.h, convex-xdep.c: Add comments explaining |
| how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex |
| port. |
| |
| * Makefile.in: Add Mach files to ALLDEPFILES, etc. |
| * m3-nat.c: Clean up more hair--message(), cprocs. |
| * configure.in: Recognize Mach targets and hosts. |
| * config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can |
| include this file. |
| * Mach headers in config/*/tm-*.h: Fix includes to match correct |
| locations of files. |
| |
| Thu Oct 14 21:35:55 1993 Rob Savoye (rob@darkstar.cygnus.com) |
| |
| * remote-mon.c (general_open): Set dev_name. Minor tweaking to get |
| it working again. |
| * config/m68k/tm-monitor.h: Remove floating point register names |
| as there aren't any on any of the monitors that use this code. |
| |
| Wed Oct 13 11:47:23 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * inflow.c: Pass pointer to process group, not process group itself, |
| to TIOCSPGRP ioctl. |
| |
| * inflow.c (terminal_ours_1): Don't print warning on failure to |
| set process group. |
| |
| * printcmd.c (printf_command): Instead of using makeva* and |
| calling vprintf, just make the appropriate calls to printf. |
| * printcmd.c, config/pa/xm-pa.h, config/mips/xm-makeva.h, |
| config/alpha/xm-alpha.h, config/m88k/xm-m88k.h: Remove all |
| traces of makeva*. My apologies to everyone (including me!) |
| who spent so much time getting it to work on various machines, |
| but look at the bright side, at least you won't have to do it |
| again in the future. |
| |
| * printcmd.c (printf_command): Make a cleanup for val_args (fixes |
| a memory leak). |
| |
| Tue Oct 12 22:54:41 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/mips/xm-mips.h: Remove comment about HAVE_SGTTY vs. usleep. |
| |
| Tue Oct 12 12:01:29 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com) |
| |
| * configure.in: only configure gdbserver for native environments |
| |
| Tue Oct 12 08:59:15 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c (read_type): Treat a negative type number at the start |
| of a type as a type reference, not as a definition of a type with |
| "50=" omitted. This makes things work on the RS/6000 again (the |
| 14 Sep 1993 change broke it). |
| |
| * inflow.c: Use 0 (standard input) not scb->fd. |
| (terminal_ours_1): If printing warning, don't claim it happened in |
| terminal_inferior. |
| |
| * blockframe.c (get_prev_frame_info): Don't error() if there are no |
| frames; just return NULL. |
| |
| * xcoffsolib.h, xcoffexec.c: Undo the part of Fred's bfd->abfd |
| change which involved structure elements. It was unnecessary and |
| was not consistently done. |
| |
| * stabsread.h, stabsread.c, dbxread.c (common_block*, copy_pending): |
| Move common block handling from dbxread.c to stabsread.c. |
| Use the name from the BCOMM instead of the ECOMM. |
| Allocate things on the symbol_obstack. |
| * xcoffread.c (process_xcoff_symbol): Process C_BCOMM, C_ECOMM, |
| and C_ECOML. On unrecognized storage classes, go ahead and call |
| define_symbol (after the complaint). |
| |
| * dbxread.c (process_one_symbol): Don't relocate 'S' symbols by |
| the text offset. |
| |
| Tue Oct 12 12:33:09 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * osfsolib.c (solib_create_inferior_hook): Reset stop_soon_quietly |
| after shared library symbol reading to get rid of warning from |
| heuristic_proc_start. |
| |
| Tue Oct 12 12:01:29 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com) |
| |
| * remote-sim.c: fix unterminated character string |
| |
| Tue Oct 12 08:59:15 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c: Fix comment about gcc 2.3.3 stab for long long int. |
| |
| Mon Oct 11 14:27:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * m3-nat.c, config/nm-m3.h: Add a target_ops struct and other |
| various things to try to get this to work. |
| |
| * symtab.h: Fix comments re headers, sharing blockvectors, etc. |
| |
| Mon Oct 11 11:46:06 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com) |
| |
| * config/i960/vxworks960.mt (REMOTE_O): add dcache.o and remote-utils.o |
| |
| Mon Oct 11 02:48:57 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (parse_partial_symbols): Do not add undefined |
| symbols to the partial symbol table. |
| * alpha-tdep.c (init_extra_frame_info): Remove kludge for gcc, |
| gcc has to be compatible with the native tools. |
| * alpha-tdep.c (alpha_push_arguments): Rename NUM_ARG_REGS to |
| ALPHA_NUM_ARG_REGS and move its definition to tm-alpha.h. |
| * config/alpha/tm-alpha.h (FRAME_ARGS_ADDRESS): Change it to the |
| way the native tools define it, update comment. |
| |
| Fri Oct 8 15:54:06 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * osfsolib.c, remote-sim.c, remote.c, solib.c, xcoffexec.c, |
| xcoffsolib.h: Use 'abfd' for bfd variables instead of 'bfd'. |
| Sun cc doesn't like variable names that match their typedef'd type. |
| |
| Fri Oct 8 14:56:21 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * inflow.c: Remove unused includes of sys/param.h and sys/types.h. |
| |
| * inflow.c, ser-unix.c, ser-go32.c, ser-tcp.c, serial.h, |
| terminal.h, fork-child.c, main.c, utils.c: Move all the process |
| group stuff back to inflow.c and terminal.h; that's a better place |
| for it and fixes problems with trying to get/set the process group |
| of a tty we're doing remote debugging on. |
| * terminal.h: Skip the redefines and includes if HAVE_TERMIOS. |
| |
| * findvar.c, value.h (symbol_read_needs_frame): New function. |
| * c-exp.y, m2-exp.y: Call it instead of having our own switch on |
| the symbol's class. |
| * valops.c (value_of_variable): Use symbol_read_needs_frame to |
| decide whether we care about finding a frame. |
| |
| Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * blockframe.c (get_frame_block): Do not adjust pc if the frame |
| function was interrupted by a signal. |
| |
| Thu Oct 7 19:20:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/h8300/tm-h8300.h: Don't define sr_get_debug. |
| * remote-sim.c: Include remote-utils.h. |
| * target.h: Add comment about target_has_execution. |
| |
| Thu Oct 7 16:14:19 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) |
| |
| * h8300-tdep.c (sim_load, sim_kill, sim_open, sim_set_args): |
| New functions. |
| * infrun.c (normal_stop): Don't try and set the pc in the current |
| frame coredump if there isn't one. |
| * remote-sim.c (gdbsim_store_register): Don't |
| SWAP_TARGET_AND_HOST, sim_store_register takes bytes in raw order. |
| (gdbsim_wait): Set status with WSETSTOP. |
| * config/h8300/tm-h8300.h (sr_get_debug): Define |
| |
| Thu Oct 7 12:56:57 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| New Mach stuff: |
| * config/i386/i386mach.c: Explain this is for the old (probably |
| non-functional and/or obsolete) Mach stuff. |
| * m3-nat.c, config/nm-m3.h, |
| i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c, |
| config/i386/{i386m3.mh,i386m3.mt,tm-i386m3.h,xm-i386m3.h}, |
| config/i386/{i386mk.mh,i386mk.mt,tm-i386mk.h,xm-i386mk.h}, |
| config/mips/{mipsm3.mh,mipsm3.mt,tm-mipsm3.h,xm-mipsm3.h}, |
| config/ns32k/{ns32km3.mh,ns32km3.mt,tm-ns32km3.h,xm-ns32km3.h}: |
| New files. |
| |
| * blockframe.c (find_pc_partial_function): If we call |
| PSYMTAB_TO_SYMTAB, call target_terminal_ours_for_output first. |
| This is needed now that wait_for_inferior passes in endaddr. |
| * infrun.c: Move call to target_terminal_inferior from proceed |
| to resume. |
| |
| Thu Oct 7 09:22:04 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * blockframe.c (find_pc_partial_function): Fix handling for PCs |
| beyond the end of the last function in an objfile. |
| * coff-solib.c (coff_solib_add): Use BFD to get fields from .lib |
| section. |
| * infrun.c (wait_for_inferior): Modify test for subroutine entry |
| to include pc out of bounds of the previous function. |
| * remote.c (remote_wait): Use strtoul for parsing 'N' message. |
| Add code to relocate symfile_objfile->sections. |
| |
| Thu Oct 7 06:22:43 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/sparc/sun4os4.mh: Add comment saying why we don't use |
| -lresolv. |
| |
| Thu Oct 7 09:29:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * breakpoint.c, breakpoint.h (breakpoint_init_inferior): New function |
| that clears the `inserted' flag for all breakpoints and deletes |
| any breakpoints which should go away between runs of programs. |
| * inflow.c (generic_mourn_inferior), infrun.c (init_wait_for_inferior), |
| remote-es.c (es1800_load), comments in exec.c and corelow.c: |
| Use it instead of mark_breakpoints_out. |
| * breakpoint.c (mark_breakpoints_out): Update comment, tm-rs6000.h |
| uses it in a completely different context. |
| * breakpoint.c (breakpoint_re_set_one): Add bp_call_dummy case. |
| |
| Thu Oct 7 09:29:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * Makefile.in (REGEX, REGEX1): Always use our own version of |
| regex.c to be consistent across hosts. |
| * source.c (_initialize_source): Initialize regex to use grep |
| style syntax as an approximation to POSIX basic regex syntax. |
| |
| Wed Oct 6 12:43:47 1993 Jeffrey A Law (law@snake.cs.utah.edu) |
| Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * hppa-tdep.c (frame_chain): Rework so that it correctly |
| handles boundaries where code with a frame pointer calls code |
| without a frame pointer. |
| (dig_fp_from_stack): New function. |
| |
| Wed Oct 6 12:43:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * breakpoint.c (delete_breakpoint): Don't insert a disabled breakpoint. |
| |
| * README: Add Alpha notes from Schauer. |
| |
| Tue Oct 5 15:26:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in (install, uninstall): Remove $$n.1 stuff; I don't |
| understand what it is trying to do, but I suspect it's not doing |
| it. |
| |
| * config/ns32k/merlin.mh: Add comment about M_INSTALL. |
| * config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and |
| M_UNINSTALL; it tries to install a non-existent file gdb.z. |
| * Makefile.in: Remove M_INSTALL stuff; the above were the only uses. |
| |
| * stabsread.c (read_range_type): Remove comment which recommends |
| distinguishing float from complex by the name. |
| |
| Tue Oct 5 12:17:40 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| Jim Kingdon (kingdon@cygnus.com) |
| Stu Grossman (grossman@cygnus.com) |
| |
| Changes to support alpha OSF/1 in native mode. |
| * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, |
| config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: |
| New files. |
| * Makefile.in: Add new files and dependencies. |
| * configure.in: Add alpha target. |
| * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o |
| * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle |
| shared libraries now. |
| * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. |
| |
| * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, |
| provide `unsigned int' default. |
| * breakpoint.c (breakpoint_auto_delete): Delete only if we really |
| stopped for the breakpoint. |
| * stabsread.c, stabsread.h (define_symbol): Change valu parameter |
| to a CORE_ADDR. |
| * stabsread.c (read_range_type): Handle the case where the lower |
| bound overflows and the upper doesn't and the range is legal. |
| * infrun.c (resume): Do not step a breakpoint instruction if |
| CANNOT_STEP_BREAKPOINT is defined. |
| |
| * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. |
| Now that we have the bp_call_dummy breakpoint the call dummy code |
| is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and |
| FIX_CALL_DUMMY can be used to set up everything for the dummy. |
| The breakpoint for the dummy is set at the entry point and thats it. |
| * blockframe.c (inside_entry_file, inside_entry_func): Do not stop |
| backtraces if pc is in the call dummy at the entry point. |
| * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use |
| the expected breakpoint pc when setting up the frame for |
| set_momentary_breakpoint. |
| * symfile.c (entry_point_address): New function for AT_ENTRY_POINT |
| support. |
| * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case. |
| |
| Tue Oct 5 11:37:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux). |
| Change other hppa host entries to use -*- not -hp-. |
| |
| Mon Oct 4 19:16:14 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * i386-nlmstub.c: New file; debugging stub for i386 NetWare. Must |
| be compiled with NetWare header files and turned into an NLM with |
| nlmconv. |
| |
| Mon Oct 4 11:02:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * minsyms.c (lookup_minimal_symbol_by_pc): Don't use mst_abs symbols. |
| |
| * dbxread.c (process_one_symbol): Make n_opt_found static. |
| |
| * Rename i386lynx-tdep.c to i386ly-tdep.c for 14 character file names. |
| * Makefile.in, config/i386/i386lynx.mt: Change accordingly. |
| |
| * values.c (record_latest_value): Fetch lazy values and set VALUE_LVAL |
| to not_lval. |
| |
| Sun Oct 3 15:54:51 1993 Stan Shebs (shebs@rtl.cygnus.com) |
| |
| * objfiles.h (objfile): New slot sym_stab_info, use by most |
| stab-reading formats. |
| * gdb-stabs.h (DBX_SYMFILE_INFO): Access sym_stab_info instead of |
| sym_private. |
| * coffread.c (coff_symfile_init): Alloc struct for sym_stab_info. |
| * dbxread.c, elfread.c, paread.c: Change sym_private references to |
| sym_stab_info references. |
| |
| Sat Oct 2 19:28:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * mipsread.c, objfiles.c, utils.c: Use PTR not void *. RISC/OS |
| 4.02 lacks void *. |
| * elfread.c: Use void * not PTR inside PARAMS. |
| |
| * config/mips/news-mips.mh: Remove coredep.o; mips-nat.o does it. |
| * config/mips/news-mips.mh: Define NAT_FILE not NM_FILE. |
| * config/mips/nm-news-mips.h: Include mips/nm-mips.h not nm-mips.h. |
| |
| Sat Oct 2 16:05:22 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * Makefile.in, coff-solib.c, coff-solib.h, i386lynx.mt, |
| tm-i386lynx.h: Add support for SVR3 COFF shared libraries. |
| |
| Sat Oct 2 15:50:41 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * m88k-nat.c (store_inferior_registers): When writing all registers, |
| don't try to write EXIP_REGNUM or ENIP_REGNUM (not needed for this |
| case, and they cause trouble). |
| |
| * TODO: Don't suggest doing fast watchpoints by stepping a line |
| at a time. That would be really hairy and still not fast enough. |
| Do suggest debug registers and page table diddling. |
| |
| Fri Oct 1 14:54:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * printcmd.c (do_examine): Make meaning of 'h', 'w', and 'g' not |
| depend on builtin_type_*. Instead, it is always 2, 4, and 8 bytes |
| like the documentation says. |
| * printcmd.c (decode_format) [CC_HAS_LONG_LONG]: Remove 'l' as |
| synonym for 'g'. This was never documented, it shouldn't depend on |
| CC_HAS_LONG_LONG, and I don't see what's wrong with 'g'. |
| |
| Fri Oct 1 10:06:35 1993 Kung Hsu (kung@cirdan.cygnus.com) |
| |
| * symtab.c: fix a bug in testsuite (virtfunc.exp) |
| |
| Thu Sep 30 11:30:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * m88k-nat.c (fill_gregset): Fix typo (R_SFIP -> R_FIP). |
| |
| * c-typeprint.c (c_type_print_base, TYPE_FN_FIELD_STUB code): |
| If demangled name lacks a colon, don't dump core. |
| |
| * blockframe.c (find_pc_partial_function): If pst->readin is |
| set, don't try to get symbols from pst. |
| |
| * inflow.c (generic_mourn_inferior): Call reinit_frame_cache |
| instead of doing it ourself. |
| * blockframe.c (reinit_frame_cache): Use code which was in |
| generic_mourn_inferior so we can use this function even when |
| we have switched targets. |
| * corelow.c (core_detach): Call reinit_frame_cache. |
| * target.c (target_detach): Don't call generic_mourn_inferior |
| (revert yesterday's change, now handled by core_detach). |
| * objfiles.c (free_objfile): Detach any core file if we call |
| SOLIB_CLEAR. #include target.h. |
| |
| * fork-child.c (fork_inferior): Don't call target_terminal_init |
| and target_terminal_inferior until we are sure that the inferior |
| has called gdb_setpgid. This fixes PR 2900 (Schauer tracked it |
| down and was able to reliably reproduce it by putting a sleep() |
| before the gdb_setpgid()). |
| |
| Thu Sep 30 12:00:49 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * c-exp.y, m2-exp.y: Change type of address for msymbol to |
| builtin_type_long. |
| * infptrace.c (fetch_register, store_inferior_register, |
| child_xfer_memory): Use PTRACE_XFER_TYPE for the type of ptrace |
| transfers. Provide an `int' default for PTRACE_XFER_TYPE. |
| |
| Thu Sep 30 11:30:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * defs.h (TARGET_*_BIT): Don't use host information (sizeof) in |
| picking defaults. |
| |
| * cp-valprint.c (cp_is_vtbl_ptr_type): Continue to accept old form. |
| |
| Thu Sep 30 11:25:55 1993 Kung Hsu (kung@cygnus.com) |
| |
| * cp-valprint.c (cp_is_vtbl_ptr_type): |
| change vtable field name to __vtbl (pr2695). |
| |
| * symtab.c (gdb_mangle_name): fix a bug, to get mangled name right. |
| |
| Wed Sep 29 18:34:22 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * Makefile.in: Add deps for i386lynx-nat.o and i386lynx-tdep.o to |
| keep non-gnu makes happy. |
| |
| Wed Sep 29 17:20:54 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c (read_hpux_symtab): When a K_END is found for a |
| K_MODULE, clear the have_module and have_name flags. |
| |
| Wed Sep 29 10:52:19 1993 Kung Hsu (kung@cygnus.com) |
| |
| * c-valprint.c: to fix virtual table print bug (pr2695). |
| |
| Wed Sep 29 10:52:19 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * target.c (target_detach): Call generic_mourn_inferior. |
| * inflow.c (generic_mourn_inferior): Call flush_cached_frames. |
| |
| Tue Sep 28 23:08:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * dbxread.c, coffread.c, elfread.c: A few changes to comments. |
| |
| Tue Sep 28 18:39:37 1993 Stan Shebs (shebs@rtl.cygnus.com) |
| |
| * configure.in: Rename ...-lynx* to ...-lynxos*. |
| Add m68*-*-lynxos* configuration. |
| * dbxread.c (coffstab_build_psymtabs): New function, |
| interfaces coffread.c to dbxread functions. |
| * coffread.c (coff_symfile_info): Expand to include |
| dbx_symfile_info slots. |
| (coff_symfile_init): Init coff_symfile_info struct. |
| (coff_locate_sections): New functions, finds the stab and stabstr |
| sections. |
| (coff_symfile_read): Call coffstab_build_psymtabs if a stab |
| section is present. |
| (coff_section_offsets): Replace fake version with real offsets. |
| |
| Tue Sep 28 18:00:50 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * infcmd.c (run_stack_dummy): Set the frame in the bp_call_dummy |
| breakpoint. |
| |
| Tue Sep 28 17:53:26 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * config/nm-sysv4.h: Include solib.h. Define SVR4_SHARED_LIBS. |
| * config/tm-sysv4.h: Don't include solib.h. |
| * config/xm-sysv4.h: Don't define SVR4_SHARED_LIBS. |
| * config/i386/i386v4.mt (TDEPFILES): Move solib.o from here... |
| * config/i386/i386v4.mh (NATDEPFILES): ...to here. |
| * config/i386/nm-i386v4.h: Include nm-sysv4.h. |
| * config/m68k/amix.mt (TDEPFILES): Move solib.o from here... |
| * config/m68k/amix.mh (NATDEPFILES): ...to here. |
| |
| Tue Sep 28 09:45:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES. |
| |
| Clean up problems with targets and hosts that have 64 bit longs |
| and pointers and 32 bit ints. |
| * breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c, |
| ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c, |
| expprint.c, gdbtypes.c, infcmd.c, language.c, language.h, |
| m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h, |
| printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c, |
| symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c: |
| Change all printf formats from %x to %lx if outputting an address. |
| Change la_*_format to use long format. |
| local_hex_string, local_hex_string_custom now take an unsigned long |
| argument, change all callers. |
| * coffread.c (read_coff_symtab): Remove superfluous cast for |
| complaint output. |
| * dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int. |
| * findvar.c, value.h (write_register): Change val to LONGEST. |
| * gdbtypes.h (struct type): Change `bitsize' to long as |
| TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer. |
| * inferior.h (struct inferior_status): Change type of stop_pc to |
| CORE_ADDR. |
| * language.h (local_octal_string, local_octal_string_custom): |
| Remove prototype, the functions are neither defined nor used. |
| * mipsread.c (parse_symbol): Use temporary variable for bitsize as |
| f->bitsize is a long now. |
| * objfiles.c (add_to_objfile_sections, build_objfile_section_table): |
| Use unsigned long casts instead of int for abusing sections_end |
| pointer as integer. |
| * stack.c (parse_frame_specification): Change type of `args' to |
| CORE_ADDR for SETUP_ARBITRARY_FRAME. |
| |
| * printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE. |
| * mipsread.c (parse_type): Alpha cc now supports the t->continued |
| bit, update algorithm to match the way the compiler uses it. |
| |
| Tue Sep 28 12:05:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * utils.c (fprintfi_filtered): Fix comments. |
| |
| Mon Sep 27 18:10:08 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * coffread.c (read_coff_symtab): Don't call getfilename if there |
| are no auxents. |
| |
| Mon Sep 27 10:22:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * symtab.c (find_pc_line): Fix comments. |
| |
| * remote-udi.c (udi_mourn): Don't pop target. |
| |
| Fri Sep 24 17:25:41 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * corelow.c: Add multi thread/process support for core files with |
| .reg/XXX pseudo-sections. |
| * i386lynx-nat.c thread.h thread.c: Remove unnecessary core file |
| support. |
| |
| Thu Sep 23 10:49:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote-udi.c (download): Skip zero length sections. |
| |
| * valops.c (search_struct_method, value_struct_elt): |
| Use (value)-1, not -1, for error. |
| |
| * infcmd.c (step_1), infrun.c (wait_for_inferior): Add comments |
| about SHIFT_INST_REGS. |
| |
| * exec.c (exec_file_command): Set text_end based on all code readonly |
| sections, not just ".text". |
| |
| * defs.h, infcmd.c, config/z8k/tm-z8k.h, config/m88k/tm-m88k.h, |
| config/sh/tm-sh.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h, |
| z8k-tdep.c: Remove all references to ADDR_BITS_SET. |
| * config/m88k/tm-m88k.h: Define TARGET_WRITE_PC. |
| |
| * config/m88k/tm-m88k.h, m88k-tdep.c: Add call function stuff. |
| |
| Thu Sep 23 00:13:06 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * config/mips/tm-mips.h (STORE_STRUCT_RETURN): Define as noop as |
| the pushing of the struct return address is already handled in |
| mips_push_arguments. |
| * mips-tdep.c (reinit_frame_cache_sfunc): Fix typo in prototype |
| declaration. |
| * mipsread.c (parse_symbol, parse_type, upgrade_type): Add more |
| sanity checks for corrupt symbol entries to avoid core dumps |
| reported by benson@odi.com. Obviously Ultrix 4.3A cc now has |
| the same problems as the OSF/1 alpha cc. |
| * mipsread.c (parse_lines): Iterate over the range of the compressed |
| line number entries, the old iteration sometimes failed to stop |
| and wrote past the end of the LINETABLE. Add sanity check to avoid |
| the same problem in case the line number info is corrupt. |
| * mipsread.c (parse_procedure): Adjust pdr for alpha __sigtramp. |
| * mipsread.c (parse_external, parse_partial_symbols): Ignore stNil |
| symbols that are produced for statics in .o files and stLocal symbols |
| that are produced for every section in OSF/1 dynamically linked |
| executables. |
| * mipsread.c (psymtab_to_symtab_1): Put out `undefined symbols' |
| warning only under `verbose on' as there are many undefined symbols |
| in a dynamically linked executable. |
| |
| Wed Sep 22 10:28:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/i960/nindy960.mt: Don't define REMOTE_O; REMOTE_O was |
| intended only for VxWorks. Remove dcache.o from TDEPFILES now |
| that we pick it up from the default REMOTE_O. |
| |
| * breakpoint.c (bpstat_what): Initialize retval.call_dummy and |
| retval.step_resume. |
| |
| * mips-tdep.c (mips_frame_chain): If frame size zero, return zero. |
| * rs6000-tdep.c: Add comment about framelessness. |
| |
| * remote-nindy.c: Declare ninMemGet and ninMemPut. |
| |
| Wed Sep 22 08:02:57 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * Makefile.in: Add i386lynx-tdep to the right places. |
| (TARDIRS): Add gdbserver. |
| |
| * exec.c (print_section_info): Print entry point. |
| * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into |
| i386lynx-tdep.c. Add core file support. |
| * i386lynx-tdep.c: New module for Lynx/386 target dependant code. |
| * maint.c: Add `maint info sections' command to print info about all |
| sections that BFD knows about for exec and core files. |
| * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer |
| before putting frame on the stack. Consolidate writes to reduce |
| traffic for remote debugging. |
| * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o. |
| * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o. |
| * config/i386/nm-i386lynx.h: Add target_pid_to_str(). |
| * config/i386/tm-i386lynx.h: Remove target_pid_to_str(). |
| * sparclite/Makefile.in: Add deps to keep Sun make happy. |
| |
| Tue Sep 21 17:48:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * breakpoint.h, breakpoint.c (bpstat_stop_status): Add new argument |
| not_a_breakpoint. |
| * infrun.c (wait_for_inferior): Pass it. Also consolidate the |
| test of whether we are stepping into a CURRENTLY_STEPPING macro. |
| |
| Tue Sep 21 17:22:34 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * breakpoint.c (bpstat_stop_status), |
| infcmd.c (step_1), |
| infrun.c (wait_for_inferior): collapse SHIFT_INST_REGS ifdef |
| and insert macro. |
| |
| * m88k-tdep.c: include ieee-float.h. new global target_is_m88110. |
| new const struct ext_format_m88110 for float format. |
| (pic_prologue_code): add braces. |
| (next_insn): remove unused variable buf. |
| (frame_find_saved_regs): remove unused variables next_addr, |
| saved_regs, regnum. |
| (frame_locals_address): remove unused variables frame, ap. |
| (frame_args_address): remove unused variables frame, ap. |
| (push_parameters): add some breaks and a default case. |
| |
| * remote-bug.c: remove redundant includes of value.h, target.h, |
| serial.h. |
| (bug_open): corrected typo, sr_multi_scan -> gr_multi_scan. |
| (bug_fetch_register): special case sfip register for m88110. |
| remove flag bit masking of pc registers. This should be handled |
| by the ADDR_BITS_* macros. |
| (bug_store_register): special case sfip register for m88110. |
| Corrected sprint format for extended registers. |
| |
| * config/m88k/tm-m88k.h: white space and comment changes. include |
| ieee-float.h. expanded to cope with m88110 extended registers. |
| (R0_REGNUM, XFP_REGNUM, X0_REGNUM): new macros. |
| (SHIFT_INST_REGS): becomes a real macro. |
| |
| Tue Sep 21 17:48:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * breakpoint.c (breakpoint_1): Support bp_call_dummy. |
| |
| Tue Sep 21 17:06:19 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * elfread.c (record_minimal_symbol_and_info): Guess the section to |
| use from the type. |
| * objfiles.c: Include gdb-stabs.h for SECT_* macros. |
| (objfile_relocate): Relocate textlow and texthigh in psymtabs. |
| Relocate partial symbols. Check that minimal SYMBOL_SECTION is |
| nonnegative before using it. |
| * symtab.h: Adjust section field comment. |
| |
| * remote.c (interrupt_query): New function. |
| (remote_interrupt_twice): Call interrupt_query. |
| (putpkt, getpkt): If quit_flag is set, call interrupt_query. |
| (remote_wait): Don't bother with objfile_relocate if the addresses |
| haven't changed. |
| (remote_fetch_registers): If we see a packet that doesn't start |
| with a hex character, fetch a new one. |
| |
| Tue Sep 21 11:44:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote.c, remote-utils.c: Use SERIAL_FLUSH_INPUT after opening it. |
| |
| * printcmd.c (print_scalar_formatted): When truncating value we are |
| going to print as unsigned, handle it generally for any length |
| less than sizeof (LONGEST), rather than special-casing sizeof (char), |
| sizeof (short), and sizeof (long). Clarify comment on what this |
| is for. |
| |
| * symfile.c (deduce_language_from_filename): Accept .cxx for C++. |
| * buildsym.c (start_subfile): Use deduce_language_from_filename |
| rather than checking for .C or .cc ourself. |
| |
| Mon Sep 20 14:53:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * defs.h: Declare argument of re_comp as const char *. |
| |
| * remote.c, remote-mips.c: Use sr_get_debug not remote_debug. |
| |
| * README: Say using bfd from another release doesn't generally work. |
| |
| Sat Sep 18 10:13:18 1993 Jim Kingdon (kingdon@poseidon.cygnus.com) |
| |
| * mipsread.c (parse_type): Don't complain() if we guessed struct |
| and it was a union, or vice versa. |
| |
| * defs.h (make_cleanup): Change PTR to void * when inside PARAMS. |
| |
| Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET. |
| * breakpoint.h (enum bptype): Add bp_call_dummy. |
| (struct bpstat_what): Add call_dummy field. |
| * infrun.c (wait_for_inferior): Deal with it. |
| * breakpoint.c (bpstat_what): Deal with call dummy breakpoint. |
| * infcmd.c (run_stack_dummy): Set the call dummy breakpoint. |
| * config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET. |
| |
| * remote-sim.h: New file. |
| * remote-sim.c: Add remote debug feature. Rename stuff to distinguish |
| interface to simulator from gdb-specific stuff. Other changes. |
| * remote-sp64sim.c: Renamed to remote-sim.c. |
| Use sr_get_debug instead of our own sim_verbose/simif_snoop. |
| Use gnutarget in call to bfd_openr. |
| Rename simif_* to gdbsim_*. |
| * config/sparc/sp64sim.mt: Change remote-sp64sim.c to remote-sim.c. |
| |
| Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * findvar.c (extract_signed_integer): Cast *p to LONGEST before doing |
| the xor and subtract. Otherwise it will not sign extend if the type |
| of LONGEST is larger than int. |
| * cp-valprint.c (cp_print_class_method): Inhibit core dump if |
| domain is an undefined cross reference. |
| * valops.c (call_function_by_hand): Set real_pc to correct |
| value if CALL_DUMMY_LOCATION != ON_STACK. |
| |
| Thu Sep 16 20:37:06 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) |
| |
| * config/a29k/tm-a29k.h (FRAME_CHAIN): If rsize is zero, return zero. |
| |
| Thu Sep 16 13:16:22 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * infrun.c (wait_for_inferior): Allow user to single step within |
| a stack dummy. |
| |
| Thu Sep 16 12:34:01 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) |
| |
| * dbxread.c (copy_pending): Deal with END NULL. |
| (process_one_symbol): Add comments about what common_block NULL means. |
| |
| Wed Sep 15 14:50:26 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) |
| |
| * remote-udi.c, remote-adapt.c, remote-mm.c: Move processor_type |
| to tm-a29k.h and a29k-tdep.c and make it an enum. |
| * a29k-tdep.c (a29k_get_processor_type): New function. Fix many |
| aspects of how we detected the processor type. |
| * remote-udi.c, remote-adapt.c, remote-mm.c (*_open): Call it |
| rather than figuring out the type ourselves. |
| |
| Thu Sep 16 12:12:59 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * sparc-stub.c (_trap_low): Do restore/save sequence after |
| setting sp to ensure that we load the previous window from the |
| right place on the stack. |
| |
| Thu Sep 16 00:36:32 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c: Many changes for alpha ecoff format: |
| Correct sizeof(int) == sizeof(long) assumptions. |
| Replace stParsed hack by putting the parsed types on the pending chain. |
| Replace mips specific ecoff mapping by ECOFF_REG_TO_REGNUM macro, |
| provide default for cross debugging. |
| Swapping the symbol back is no longer needed as the symbol is not |
| modified anymore. |
| Add new alpha basic types, handle btTypedef, handle stStaticProc |
| external symbols . |
| Update and clean up cross_ref for alpha cc cross ref variations. |
| Allocate types on the type_obstack to inhibit storage leaks. |
| * config/mips/tm-mips.h (ECOFF_REG_TO_REGNUM): Define. |
| * gdbtypes.c (recursive_dump_type): Dump TYPE_TAG_NAME if it is set. |
| |
| Tue Sep 14 09:12:17 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) |
| |
| * stabsread.c (read_type): Process "s" (size) type attribute. |
| If type is defined to another type, copy the type. |
| |
| Tue Sep 14 18:37:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * config/i386/i386v4.mh (NATDEPFILES): Move exec.o from here... |
| * config/i386/i386v4.mt (TDEPFILES): ...to here. |
| |
| Tue Sep 14 12:21:49 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * Makefile.in (remote_utils_h): add serial.h and target.h. |
| (main.o, remote-es.o, remote-nindy.o, remote.o): remove target.h |
| (already in remote_utils_h). |
| (remote-utils.o): new rule. |
| |
| * remote-utils.h: include serial.h. |
| |
| * serial.h: ifdef protect from multiple inclusion. |
| |
| * remote.c, remote-nindy.c, remote-mon.c, remote-es.c: include |
| remote-utils.h. |
| |
| * remote.c (remote_open), remote-nindy.c (nindy_open, |
| nindy_files_info), remote-mon.c (general_open), remote-es.c |
| (es1800_open): use remote-utils facilities for baud rate. |
| |
| Tue Sep 14 09:12:17 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) |
| |
| * paread.c, coffread.c, elfread.c, dwarfread.c: |
| Include <time.h> and <sys/types.h> before libbfd.h. |
| |
| * paread.c: Define BYTES_IN_WORD before including aout/aout64.h. |
| |
| * Makefile.in (a29k-tdep.o): Depend on $(defs_h). |
| * config/a29k/tm-a29k.h (SAVED_PC_AFTER_CALL): Use gr122 not lr0 |
| if this is a transparent procedure. |
| |
| Mon Sep 13 16:06:43 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) |
| |
| * remote.c: Define remote_debug to 0 and #if 0 baud_rate. Temporary |
| hack so this file compiles again. |
| |
| * remote-utils.c (gr_multi_scan): Cast return value from alloca. |
| (gr_multi_scan): #if 0 never-reached return(-1). |
| |
| * remote-udi.c (udi_wait): Return inferior_pid not 0. |
| |
| Mon Sep 13 14:14:35 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| Collect some remote things into remote-utils. |
| * remote-utils.[ch]: new files of functions collected from several |
| different remote targets. |
| * Makefile.in (REMOTE_O): add remote-utils.o. |
| (dcache_h, remote_utils_h): new macros. |
| (HFILES): add $(remote_utils_h). |
| (ALLDEPFILES): add $(remote_utils_h). |
| (dcache.o): new rule. |
| (main.o, remote-bug.o): also depend on $(remote_utils_h). |
| * target.h (remote_debug): extern moved to remote-utils.h. |
| * target.c (find_default_run_target, find_core_target): initialize |
| runable. |
| (remote_debug): moved to remote-utils.c. |
| (_initialize_targets): move declaration of user variable |
| remotedebug to remote-utils.c. |
| * remote-bug.c: include remote-utils.h rather than dcache.h. |
| (bug_close, bug_write, bug_write_cr, desc, bug_dcache, timeout, |
| dev_name, check_open, is_open, readchar, readchar_nofail, |
| pollchar, expect, expect_prompt, get_hex_digit, get_hex_byte, |
| get_hex_word, bug_kill, bug_detach, bug_create_inferior, |
| multi-scan, bug_prepare_to_store, bug_fetch_word, |
| bug_store_word, bug_files_info, bug_mourn, bug_com, bug_device, |
| bug_speed): removed and replaced with facilities from |
| remote-utils.[ch]. |
| (bug_read_inferior_memory): renamed to bug_read_memory. |
| (bug_write_inferior_memory): renamed to bug_write_memory. |
| (bug_xfer_inferior_memory): renamed to bug_xfer_memory. |
| (get_word): comment out this unused function for now. |
| (bug_settings, cpu_check_strings): new statics. |
| (bug_open): rewritten to use gr_open. |
| (_initialize_remote_bug): remove declarations of commands bug, |
| device, speed. |
| * main.c: include remote-utils.h. |
| (baud_rate): removed to remote-utils.c. |
| (main): handle baud rate settings using new facilities from |
| remote-utils. |
| * defs.h (baud_rate): removed extern. |
| |
| m88110 support via bug-197 monitor. |
| * remote-bug.c (get_reg_name, bug_fetch_register, |
| bug_store_register): added m88110 extended register support. |
| (wait_strings): added bug-197 prompt. |
| (bug_wait): cope with bug-197 prompt. |
| (start_load): cope with either bug-197 or bug-187 prompt. |
| |
| Mon Sep 13 12:53:09 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) |
| |
| * inferior.h, infrun.c, thread.c, infcmd.c: Remove all uses of |
| pc_changed. If it was ever set to a non-zero value, it was before |
| GDB 2.8. It doesn't seem to have any useful function. |
| |
| * defs.h: Don't define NORETURN (see comment). |
| |
| Sat Sep 11 10:46:09 1993 Jim Kingdon (kingdon@poseidon.cygnus.com) |
| |
| * m88k-nat.c (fill_gregset): Set r31 and sfip. |
| |
| Thu Sep 9 10:18:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote-udi.c (udi_wait, case UDIStdinNeeded): Use a loop calling |
| getchar() (terminated only on '\n') instead of scanf. Send the |
| '\n' which terminates it to the remote system. |
| |
| More gcc lint: |
| * exec.c (ignore): Return 0. |
| * stack.c (return_command): Fetch lazy value directly, not via |
| VALUE_CONTENTS, to avoid "value computed is not used". |
| * inflow.c (new_tty): Move osigttou inside #if. |
| |
| * remote.c (remote_fetch_registers): If remote reply is short, just |
| note that fact and keep going (reading extra registers as all bits 0). |
| (remote_store_registers): Send number of registers that were found |
| by remote_fetch_registers. |
| * m68k-tdep.c, config/m68k/tm-m68k.h, config/m68k/tm-*.h: Remove |
| HAVE_68881. Define CANNOT_STORE_REGISTER if ptrace() can't write |
| floating registers. |
| * config/m68k/{tm-m68k-nofp.h,m68k-nofp.mt,tm-m68k-fp.h,m68k-fp.mt}: |
| Remove, replaced by {tm-m68k-em.h,m68k-em.mt}. |
| * Makefile.in, configure.in: Change accordingly. |
| |
| Thu Sep 9 04:59:03 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (cross_ref): Allow SGI extended symbol types as cross |
| reference targets. |
| * symmisc.c (print_symbol): Use TYPE_TAG_NAME not TYPE_NAME to avoid |
| printing of identities. |
| |
| Wed Sep 8 19:18:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * breakpoint.c (breakpoint_1): Deal with step resume breakpoint. |
| |
| Wed Sep 8 13:01:10 1993 K. Richard Pixley (rich@cygnus.com) |
| |
| Gcc lint. |
| * config/m88k/tm-m88k.h (frame_find_saved_regs): prototype. |
| * config/h8300/tm-h8300.h (NUM_REGS): rewrite to avoid nested comment. |
| * blockframe.c (get_prev_frame_info): initialize address. |
| * breakpoint.c (bpstat_copy): initialize retval. |
| (bpstat_stop_status): initialize value_is_zero. |
| (bpstat_what): initialize bs_class. |
| (breakpoint_1, mention): add do-nothing case for bp_step_resume. |
| (break_command_1): initialize cond_end, addr_end, & |
| canonical_strings_chain. |
| (enable_breakpoint): initialize save_selected_frame. |
| * buildsym.c (end_symtab): initialize symtab & linetablesize. |
| * c-exp.y (parse_number): initialize i. |
| * c-typeprint.c (c_type_print_varspec_prefix): include |
| TYPE_CODE_BITSTRING in switch statements and do nothing. |
| * c-valprint.c (c_val_print): removed unused variable c. |
| * ch-valprint.c (chill_val_print): removed unused variable eltlen. |
| * cp-valprint.c (cp_print_class_method): initialize f & j. |
| * eval.c (evaluate_subexp): initialize pc2, arg1, arg2. |
| * expprint.c (print_subexp): initialize myprec, assoc, & tempstr. |
| * findvar.c (value_from_register): initialize first_addr. |
| * gdbtypes.c (lookup_struct_elt_type): localize use of temporary |
| variable typename. |
| * infcmd.c (run_stack_dummy): return zero rather than simple |
| return. |
| * infrun.c (wait_for_inferior): initialize stop_sp, prologue_pc. |
| remove symtab, appears unused. |
| (restore_selected_frame): return 1. |
| * mipsread.c (psymtab_to_symtab_1): initialize first_off. |
| (fixup_sigtramp): initialize b0. |
| * printcmd.c (do_examine): initialize val_type. |
| (print_frame_args): initialize b. |
| * ser-tcp.c (tcp_restore): comment out declaration. Appears |
| unused. |
| * ser-unix.c (hardwire_restore): comment out declaration. Appears |
| unused. |
| (hardwire_send_break): moved variable status into ifdef |
| HAVE_SGTTY. |
| (wait_for): moved variable numfds into ifdef HAVE_SGTTY. |
| * serial.h: comment change only. |
| * stabsread.c (rs6000_builtin_type): initialize rettype. |
| (read_range_type): initialize nbits. |
| * stack.c (print_frame_info): remove unused variable numargs. |
| (parse_frame_specification): remove unused variables arg1, arg2, |
| arg3. |
| (return_command): initialize return_value. |
| * symfile.c (cashier_psymtab): initialize pprev. |
| * symtab.c (find_pc_psymbol): initialize best. |
| (lookup_symbol): initialize s. |
| (make_symbol_completion_list): initialize quote_pos. |
| * thread.c: include command.h. |
| (thread_info): static declaration removed; unused. |
| (info_threads_command): fix == vs = typo. |
| * typeprint.c (whatis_exp): initialize old_chain. |
| * valprint.c (val_print_string): remove unused variable |
| first_addr_err. Initialize old_chain. |
| (_initialize_valprint): white space comment change. |
| * values.c (show_values): rewrite if statement to avoid empty |
| body. |
| (vb_match): remove unused variable fieldtype_target_type. |
| |
| Wed Sep 8 10:21:33 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in (mipsread.o): Depend on $(bfd_h). |
| |
| Tue Sep 7 13:06:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * gdbserver/Makefile.in (TAGS): config files are in |
| $(srcdir)/../config, not $(srcdir)/config. |
| |
| * config/pa/tm-hppa.h: Declare target_read_pc and target_write_pc. |
| (STORE_RETURN_VALUE): Pass the correct offset of the return |
| register to write_register_bytes. |
| * hppa-tdep.c: Use target_write_pc if PCOQ_TAIL_REGNUM was not saved. |
| |
| Tue Sep 7 14:30:34 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * remote.c (remote_wait): Don't call error. Instead, call warning |
| inside a loop. User can ^C to get out. |
| |
| * config/m68k/tm-m68k.h (FIX_CALL_DUMMY): Changed name of swapping |
| routine to match BFD name change. |
| * config/z8k/tm-z8k.h (FIX_CALL_DUMMY): Likewise. |
| |
| Mon Sep 6 15:01:57 1993 Jeffrey Wheat (cassidy@cygnus.com) |
| |
| * elfread.c: change elf32_symbol_type to elf_symbol_type |
| |
| Mon Sep 6 15:43:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * remote.c (remote_wait): Added 'W' and 'N' responses. |
| |
| Fri Sep 3 08:57:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * main.c, utils.c: Add comments about immediate_quit. |
| |
| * elfread.c (elf_symtab_read): Don't add symbols starting with ".L" |
| to minimal symbols. |
| |
| * target.c (pop_target): Don't try to deal with the stack becoming |
| empty. Shouldn't happen and the code that tried was broken. |
| |
| * dcache.c: Cast return value from xmalloc. |
| |
| * remote.c: Move setting of immediate_quit from remote_open to |
| remote_start_dummy and set it back to zero when done. |
| |
| Thu Sep 2 00:07:36 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * m88k-tdep.c: Remove a bunch of unused #includes. |
| |
| * language.h: Add comment about current_language. |
| |
| * mips-tdep.c (_initialize_mips_tdep): Change heuristic-fence-post |
| from var_uinteger to var_zinteger. |
| |
| * configure.in: Fix typo (delta88r4 -> delta88v4). |
| |
| * config/m88k/xm-delta88.h: Don't include sys/siginfo.h. It was |
| to make this work on SVR4 before SVR4 had its own configuration, |
| and it breaks SVR3. |
| |
| * config/m88k/tm-delta88v4.h: Define FRAME_CHAIN_VALID_ALTERNATE. |
| |
| * config/m88k/delta88v4.h (NATDEPFILES): Remove infptrace.o inftarg.o. |
| |
| * config/m88k/xm-dgux.h: Renamed from config/m88k/xm-m88k.h. |
| * config/m88k/m88k.mh: Use xm-dgux.h. |
| * config/m88k/xm-m88k.h: New file, with HOST_BYTE_ORDER, |
| MAKEVA_END and MAKEVA_ARG. |
| * config/m88k/xm-*.h: Include m88k/xm-m88k.h. |
| * printcmd.c: Remove __INT_VARARGS_H code; now in xm-m88k.h. |
| |
| Wed Sep 1 19:31:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote-udi.c (udi_wait): Call `warning' not `error'. |
| |
| * symtab.c (COMPLETION_LIST_ADD_SYMBOL): If the symbol has a |
| demangling, don't put the mangled form in the completion list. |
| |
| * symtab.c, symfile.c, c-exp.y, ch-exp.y, m2-exp.y, buildsym.c, |
| symfile.h, stabsread.c, minsyms.c, solib.c, nlmread.c, dwarfread.c |
| partial-stab.h, symmisc.c, gdbtypes.c: Lint. Remove (or put |
| inside #if) unused variables and labels. Fix unclosed comment. |
| Deal with enumeration values unhandled in switch statements. Make |
| sure non-void functions return values. Include appropriate |
| headers. |
| * dbxread.c (elfstab_build_psymtabs): Don't check for unsigned |
| value < 0. |
| |
| Wed Sep 1 14:36:00 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * i960-tdep.c, ns32k-pinsn.c, remote-adapt.c, xcoffread.c: |
| index -> strchr. |
| |
| Wed Sep 1 11:35:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote.c: Add comment explaining why dcache is disabled. |
| (remote_fetch_word, remote_store_word): Make static and #if 0. |
| They are not called from anywhere. |
| |
| Wed Sep 1 14:41:28 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * arm-tdep.c, convex-tdep.c, convex-xdep.c, dbxread.c, |
| h8300-tdep.c, h8500-tdep.c, i960-pinsn.c, i960-tdep.c, |
| infptrace.c, m88k-tdep.c, mips-tdep.c, regex.c, remote-vx.c, |
| rs6000-tdep.c, xcoffexec.c, xcoffread.c, z8k-tdep.c, |
| config/arm/tm-arm.h, config/convex/tm-convex.h, |
| config/gould/tm-np1.h, config/gould/tm-pn.h, |
| config/m68k/tm-isi.h, config/ns32k/tm-umax.h, |
| config/pa/tm-hppa.h, config/pyr/tm-pyr.h, |
| config/rs6000/tm-rs6000.h, config/tahoe/tm-tahoe.h, |
| config/vax/tm-vax.h: bzero -> memset. |
| |
| * regex.c: bcmp -> memcmp. |
| |
| Wed Sep 1 11:35:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * symtab.c (find_pc_line, find_line_common), |
| symtab.h (struct linetable), xcoffread.c (arrange_linetable): |
| Revise comments re linetable sorting. |
| * buildsym.c (compare_line_numbers): Sort by pc, not by line. |
| * coffread.c: Tell end_symtab to sort the line table. |
| |
| * coffread.c: Re-work a lot of the coff-specific stuff to use stuff |
| in buildsym.c. This includes coff_finish_block, coff_context_stack, |
| coff_local_symbols, coff_file_symbols, coff_global_symbols, |
| coff_end_symtab and coff_add_symbol_to_list. |
| (read_enum_type): Deal with it now that we have a "struct pending" |
| not a "struct coff_pending". |
| |
| * buildsym.c (end_symtab): Don't realloc subfile->linetable. |
| |
| Wed Sep 1 13:12:43 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * a68v-nat.c, altos-xdep.c, convex-tdep.c, convex-xdep.c, |
| findvar.c, hppab-nat.c, hppah-nat.c, i386mach-nat.c, |
| irix4-nat.c, m68k-tdep.c, m88k-tdep.c, mipsread.c, regex.c, |
| remote-bug.c, remote-hms.c, rs6000-nat.c, rs6000-tdep.c, |
| sparc-nat.c, stabsread.c, sun3-nat.c, sun386-nat.c, symfile.c, |
| umax-xdep.c, xcoffread.c, 29k-share/udi/udip2soc.c, |
| 29k-share/udi/udr.c, config/a29k/tm-a29k.h, config/arm/tm-arm.h, |
| config/convex/tm-convex.h, config/gould/tm-np1.h, |
| config/gould/tm-pn.h, config/h8300/tm-h8300.h, |
| config/h8500/tm-h8500.h, config/i386/tm-i386aix.h, |
| config/i386/tm-sun386.h, config/i386/tm-symmetry.h, |
| config/i960/tm-i960.h, config/m68k/tm-news.h, |
| config/m88k/tm-m88k.h, config/mips/tm-mips.h, |
| config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h, |
| config/pa/tm-hppa.h, config/pyr/tm-pyr.h, |
| config/rs6000/tm-rs6000.h, config/sh/tm-sh.h, |
| config/tahoe/tm-tahoe.h, config/vax/tm-vax.h, |
| config/z8k/tm-z8k.h, nindy-share/nindy.c: bcopy -> memcpy. |
| |
| Wed Sep 1 05:05:53 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (parse_partial_symbols): Use language from FDR if it |
| is unambigous. Patch from ptf@delcam.co.uk (Paul Flinders). |
| * mipsread.c (ecoff_symfile_info): New struct to hold the global |
| pending_list. |
| * mipsread.c (mipscoff_symfile_init, parse_partial_symbols): |
| Allocate the global pending list and link it to the objfile. |
| * mipsread.c (is_pending_symbol, add_pending): Use global pending |
| list from objfile. Allocate pending list entries from the |
| psymbol_obstack. |
| * mipsread.c (free_pending): Remove. The pending list is now |
| freed when the psymbol_obstack is freed. |
| * mipsread.c (psymtab_to_symtab1): Remove pending list allocation, |
| the global pending list is used now. |
| * mipsread.c (parse_partial_symbols): Skip only the first |
| file indirect entry when building the dependency list. |
| |
| Tue Aug 31 15:01:27 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| Break dcache code out of remote.c. |
| * dcache.h: white space changes only. |
| * dcache.c: add user settable variable to set whether data caching |
| is in use. |
| * remote.c: include dcache.h. removed data caching code which is |
| now in dcache.c. Compile in data caching again. (data caching |
| is currently off by default.) |
| (remote_read_bytes, remote_write_bytes): change second arg to |
| unsigned char. |
| (remote_dcache): new static variable. |
| * Makefile.in (REMOTE_O): add dcache.o. |
| * config/m88k/m88k.mt (TDEPFILES): removed dcache.o. |
| |
| Break dcache code out of remote-nindy.c. |
| * remote-nindy.c: removed dcache code. Changed callers to use new |
| conventions. include dcache.h. |
| (nindy_dcache): new static variable. |
| * config/i960/nindy960.mt (TDEPFILES): added dcache.o. |
| |
| Break dcache code out of remote-bug.c into dcache.[hc]. |
| * Makefile.in (dcache_h): new macro. |
| (HFILES): added $(dcache_h). |
| (ALLDEPFILES): added dcache.c. |
| (dcache.o): new rule. |
| (remote-bug.o): now depends on $(dcache_h). |
| * remote-bug.c: include dcache.h. remove externs for insque and |
| remque, add extern for bcopy. Prototype bug_close, |
| bug_clear_breakpoints, bug_write_cr. dcache code moved to |
| dcache.[hc]. Changed dcache calling convention to include an |
| initial DCACHE argument. |
| (bug_dcache): new static variable. |
| (bug_read_inferior_memory): change second arg to |
| unsigned char. |
| * dcache.[ch]: new files. |
| * config/m88k/m88k.mt (TDEPFILES): add dcache.o. |
| |
| Tue Aug 31 10:33:13 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * c-typeprint.c (c_print_type_base): Treat show = 0 just like |
| show < 0. The only case where we had been distinguishing is that |
| show = 0 used to print "struct " or "enum " instead of |
| "struct {...}" or "enum {...}" which seems clearly wrong. |
| |
| Mon Aug 30 17:51:32 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * configure.in: recognize m88110 as an m88k. |
| |
| Mon Aug 30 16:07:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * valops.c (call_function_by_hand): If we discard cleanups, call |
| bpstat_clear (&inf_status.stop_bpstat). |
| |
| Mon Aug 30 12:47:46 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * stabsread.h, dbxread.c (end_psymtab): Return NULL if the psymtab |
| was empty and thrown away. |
| * mipsread.c (parse_partial_symbols): Do not add empty psymtabs to |
| dependency list, skip self dependencies. |
| * mipsread.c (parse_fdr): Removed, obsolete. |
| * mipsread.c (parse_lines): Check for cbLine being zero, not |
| cbLineOffset. |
| * mipsread.c (struct symloc): Add pst_language. |
| * mipsread.c (parse_partial_symbols): Set up proper language for |
| header files, save it in pst_language for psymtab_to_symtab_1. |
| * mipsread.c (psymtab_to_symtab_1): Use pst_language. |
| |
| Mon Aug 30 10:48:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * configure.in: Fix typo m88*-motorola-svr4* -> sysv4*. |
| |
| Fri Aug 27 17:09:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * paread.c: Include som.h instead of libhppa.h. (From Utah.) |
| |
| Fri Aug 27 09:30:40 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * symmisc.c (dump_symtab): Use catch_errors around print_symbol. |
| Change calling sequence of print_symbol to fit catch_errors. |
| |
| * mips-tdep.c: Call reinit_frame_cache every time the user does |
| "set heuristic-fence-post". |
| |
| * gdbserver/low-sun3.c: New file. |
| * gdbserver/Makefile.in, config/m68k/sun3.mh: Change accordingly. |
| |
| * Rename files for 14-character limits: |
| gdbserver/remote-gutils.c -> gdbserver/utils.c |
| gdbserver/remote-inflow.c -> gdbserver/low-lynx.c |
| gdbserver/remote-inflow-sparc.c -> gdbserver/low-sparc.c |
| gdbserver/remote-server.c -> gdbserver/server.c |
| remote-monitor.c -> remote-mon.c |
| * Makefile.in, gdbserver/Makefile.in, gdbserver/configure.in, |
| config/m68k/monitor.mt, config/i386/i386lynx.mh, |
| config/sparc/sun4os4.mh: Change accordingly. |
| * gdbserver/Makefile.in: Remove more junk inherited from gdb Makefile. |
| |
| Thu Aug 26 14:32:51 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * infcmd.c, inferior.h (run_stack_dummy): If we stop somewhere |
| besides the dummy, return 1 rather than calling error(). |
| Let caller print the error message. Remove name argument. |
| * valops.c (call_function_by_hand): Deal with changes to calling |
| sequence of run_stack_dummy. Discard restore_inferior_status cleanup |
| if run_stack_dummy returns 1. |
| |
| * Version 4.10.2. |
| |
| * config/mips/tm-mips.h (EXTRACT_STRUCT_VALUE_ADDRESS): |
| Get struct return address from v0, not a0. |
| |
| * infrun.c (restore_inferior_status): Use catch_errors when |
| restoring selected frame. |
| |
| Wed Aug 25 21:52:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * infrun.c (save_inferior_status, restore_inferior_status): |
| Save and restore the registers too. |
| * inferior.h (struct inferior_status): Add "registers". |
| |
| Tue Aug 24 00:36:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * dbxread.c (end_psymtab): Clean up comment. |
| |
| * frame.h, symtab.h, findvar.c (read_var_value): Change basereg |
| support to use LOC_BASEREG rather than SYMBOL_BASEREG_VALID. |
| * dwarfread.c: Use LOC_BASEREG where appropriate. |
| * Various: Support LOC_BASEREG and LOC_BASEREG_ARG. |
| |
| * coffread.c (init_lineno, init_stringtab): Don't check whether |
| xmalloc returned NULL. |
| |
| * config/vax/xm-vaxult.h: Define NO_PTRACE_H. |
| |
| * target.c, target.h: Add "set remotedebug" command. |
| * remote-bug.c, remote.c, remote-mips.c: Remove "set remotedebug" and |
| "set m88ksnoop" options and use generic "set remotedebug" instead. |
| * NEWS: Describe this change. |
| |
| Mon Aug 23 20:26:22 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * buildsym.h: Remove declaration of dbxread.c functions. |
| * stabsread.h: Group together dbxread.c functions. |
| Move elfstab_build_psymtabs here from symfile.h. |
| Declare pastab_build_psymtabs. |
| * elfread.c, paread.c: Include stabsread.h (for stabsread_new_init |
| declaration, etc). |
| |
| Mon Aug 23 17:16:23 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * remote-bug.c: rename quiet to bug88k_snoop. |
| (double_scan, multi_scan): generalize double_scan into a scan |
| for multiple patterns. Rename to multi_scan. |
| (bug_wait, bug_write_inferior_memory): adapt to use the new |
| multi_scan in order to catch and represent target bus errors. |
| (bug_scan): currently unused, so comment out. |
| (bug_quiet): removed. Replaced with a standard user settable boolean. |
| |
| * m88k-tdep.c: remove include of sys/dir.h. Appears unnecessary |
| and isn't available on solaris. |
| |
| Mon Aug 23 14:56:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/m88k/{delta88v4.mt,delta88v4.mh}: New files |
| * config/m88k/delta88.mh: Fix comment. |
| * config/m88k/tm-delta88.h: Remove unused BCS define. |
| * config/m88k/{tm-delta88v4.h,xm-delta88v4.h,nm-delta88v4.h}: |
| New files. |
| * configure.in: Recognize m88*-motorola-sysv4*. |
| * m88k-nat.c: Always include sys/types.h; don't depend on USG. |
| |
| Mon Aug 23 12:57:42 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (parse_symbol, parse_type, cross_ref): Pass name of |
| symbol as an argument and use it in complaints. |
| * symmisc.c (dump_psymtab): Dump filenames of dependencies. |
| |
| Mon Aug 23 1993 Sean Fagan (sef@cygnus.com) |
| and Jim Kingdon (kingdon@cygnus.com) |
| |
| Add NetBSD support: |
| * configure.in: Recognize netbsd. |
| |
| Sun Aug 22 22:50:32 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c (get_textlow): Don't go past a K_END when looking for a |
| K_FUNCTION. Avoids losing on source files with no functions. |
| |
| Fri Aug 20 14:01:39 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote-nindy.c: Remove unused include of sys/ioctl.h. |
| |
| * frame.h, symtab.h: Revise comments regarding baseregs. |
| |
| Fri Aug 20 15:07:05 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (parse_partial_symbols, psymtab_to_symtab_1): |
| Set language for psymtab and symtab. |
| * mipsread.c (new_symbol): Set language and initialize demangled |
| name for symbol. |
| * symmisc.c (print_symbol): Use SYMBOL_SOURCE_NAME when printing |
| the symbol type. |
| * symtab.c (decode_line_1): Inhibit coredumps with cfront executables. |
| |
| Fri Aug 20 14:01:39 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Move KERNEL_U_ADDR from xm-hp300bsd.h to nm-hp300bsd.h and make |
| it conditionalized on 4.3 vs. 4.4. |
| * config/m68k/nm-hp300bsd.h: Move REGISTER_U_ADDR out of 4.3 and |
| 4.4 sections; it was identical and now works for 4.4. |
| |
| * mips-tdep.c (is_delayed): Use INSN*BRANCH* not ANY_DELAY. |
| |
| * printcmd.c (MAKEVA_END): Update this version to use "aligner". |
| |
| Thu Aug 19 22:08:09 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * config/vax/tm-vax.h (BELIEVE_PCC_PROMOTION): Define. |
| * mipsread.c (parse_symbol, parse_type, cross_ref): Handle corrupt |
| file indirect entries with complaints instead of core dumps. Remove |
| complaint for stTypedef within aggregates. |
| |
| Thu Aug 19 17:58:39 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * coffread.c (process_coff_symbol): Ignore tagnames like .0fake. |
| |
| * coffread.c (coff_read_enum_type): #if 0 out code which changes |
| enum {FALSE, TRUE} into boolean. |
| |
| * config/m68k/delta68.m{t,h}: Use nm-delta68.h, etc. not |
| non-existent files nm-delta.h, etc. |
| * config/m68k/tm-delta68.h: Define CANNOT_STORE_REGISTER. |
| * delta68-nat.c: Add "[0]" in offsetof argument. |
| * delta68-nat.c (_initialize_kernel_u_addr): Don't try to set up |
| nl with initializer, just assign to it. Check n_scnum field on |
| return. |
| |
| Wed Aug 18 21:42:52 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c (read_hpux_symtab): Call SET_NAMESTRING for K_MODULE |
| debug symbols. |
| |
| Wed Aug 18 12:03:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * printcmd.c (print_address), values.c (value_as_pointer): Don't |
| use ADDR_BITS_REMOVE. |
| * defs.h: Try to clarify comment about ADDR_BITS_REMOVE. |
| |
| * blockframe.c (block_innermost_frame): Uncomment. |
| Return NULL if passed NULL. |
| * frame.h: Declare it. |
| * expression.h (union exp_element): Add field block. |
| * parse.c (write_exp_elt_block): New function. |
| * expression.h (OP_VAR_VALUE): Now takes additional struct block *. |
| * *-exp.y: Write block for OP_VAR_VALUE. |
| * eval.c, expprint.c, parse.c: Deal with block for OP_VAR_VALUE. |
| * valops.c, value.h (value_of_variable), callers: |
| Add second argument, for block. |
| |
| * main.c (gdb_readline): If we read some characters followed by EOF, |
| return them rather than returning NULL. |
| |
| Tue Aug 17 11:14:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * mips-tdep.c: Remove unused #ifndef NUMERIC_REG_NAMES and add comment. |
| |
| Tue Aug 17 15:10:04 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * config/m88k/tm-m88k.h: Fix typo in comment. |
| (FP_REGNUM): define in terms of SP_REGNUM |
| rather than by absolute number. Also clearly comment that this |
| is a convenient lie in order to decrease future confusion. |
| (ACTUAL_FP_REGNUM): new macro for FP. |
| (FRAME_CHAIN_VALID): removed. Standard default works fine. |
| * m88k-tdep.c (frame_chain_valid): redundant, so removed. |
| (NEXT_PROLOGUE_INSN): removed unused fourth arg, fixed all |
| callers. |
| (read_next_frame_reg): declare static. |
| (examine_prologue): removed unused variabel insn2, rename insn1 |
| to insn, rewrote comment about finding fp, sp, etc. set frame_fp |
| based on ACTUAL_FP_REGNUM rather than FP_REGNUM which is |
| actually a scammed alias for SP_REGNUM on m88k. |
| |
| * frame.h: fixed typo in comment. |
| |
| Tue Aug 17 11:14:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * 29k-share/udi/udiphcfg.h: Always include udiphunix.h not udiphdos.h. |
| |
| * complaints.c (complain): fflush (stdout) after output. |
| |
| Tue Aug 17 01:43:55 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * blockframe.c, frame.h (sigtramp_saved_pc): New routine to fetch |
| the saved pc from sigcontext on the stack for BSD signal handling. |
| * config/i386/tm-i386bsd.h (SIGTRAMP_START, SIGTRAMP_END, FRAME_CHAIN, |
| FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, SIGCONTEXT_PC_OFFSET): |
| Define to make backtracing through sigtramp work. |
| * config/vax/tm-vax.h (SIGTRAMP_START, SIGTRAMP_END, TARGET_UPAGES, |
| FRAME_SAVED_PC, SIGCONTEXT_PC_OFFSET): Ditto. |
| |
| Mon Aug 16 13:52:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * main.c (cd_command): If current_directory on entry is "/", then |
| don't append an extra slash. |
| Don't assume that /../.. means /. |
| |
| * target.c (target_xfer_memory): Clear errno before calling |
| to_xfer_memory. |
| |
| * stack.c (frame_info, print_frame_info): Add comment about using |
| the starting source line number on a line boundary if backtracing |
| through sigtramp. |
| |
| Mon Aug 16 09:52:33 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c: Add U Utah contribution notice. Add TODO list. |
| (hp_type_lookup): Use TYPE_NAME and TYPE_TAG_NAME. |
| (process_one_debug_symbol): Likewise. |
| |
| Mon Aug 16 02:56:01 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * blockframe.c (create_new_frame, get_prev_frame_info): |
| Use the function name when calling IN_SIGTRAMP. |
| * config/m68k/tm-m68k.h (SIG_PC_FP_OFFSET, SIG_SP_FP_OFFSET): |
| Define for correct handling of bachtraces through _sigtramp. |
| * m68k-tdep.c (m68k_find_saved_regs): Adjust saved sp for fake |
| sigtramp frames. |
| * mipsread.c (parse_type): Handle corrupt TIR info with complaint |
| instead of core dump. |
| * mipsread.c (parse_partial_symbols): Put static symbols into the |
| mimimal symbol table, use proper mst_types for all minimal symbols. |
| * stack.c (frame_info, print_frame_info): Use the starting source |
| line number on a line boundary if backtracing through sigtramp. |
| |
| Fri Aug 13 14:37:05 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * remote-bug.c: include gdbcmd.h. |
| (sleep, remque, insque): forward decls added. |
| (bug_fetch_registers, bug_store_registers): forward decls |
| removed. |
| (bug_read_inferior_memory, bug_write_inferior_memory): forward |
| decls added. |
| (srec_frame, srec_max_retries, srec_bytes, srec_echo_pace, |
| srec_sleep, srec_noise): new static variables for user settable |
| options. Mostly these are for debugging and tuning. I don't |
| expect them to stay user settable options for long. |
| (timeout): change default to 4 seconds. |
| (check_open): declare funtion static, force return value. |
| (readchar_nofail): if timeout, then say so if not being quiet. |
| (pollchar, double_scan, bug_scan, bug_srec_write_cr, |
| start_load): new functions. |
| (bug_wait): rewritten to use double scan. |
| (expect): while (1) -> for (;;) |
| (get_hex_digit): rewrite if condition to avoid gcc complaints. |
| (bug_load, bug_create_inferior, bug_open, bug_store_register): |
| removed unused variables. |
| (bug_load): replaced DELTA macro with user settable srec_frame |
| variable. Other minor lint. |
| (find_end_of_word, is_baudrate_right, set_rate, not_bug_wait, |
| gethex, timed_read, translate_addr, bug_before_main_loop): |
| unsused and removed. |
| (bug_resume): add missing first arg, pid. |
| (get_reg_name): use ip rather than cr04. |
| (bug_write, bug_write_cr, but_clear_breakpoints, bug_quiet): |
| declare type, args, and explicitly return. |
| (bug_store_register): straighten out the ip vs cr04 confusion. |
| (bug_write_inferior_memory): rewrite to cope with errors while |
| downloading s-records. |
| (bug_read_inferior_memory): declare static. |
| (bug_clear_breakpoints): expect nobr before prompt. |
| (_initialize_remote_bug): add initializations for srec-bytes, |
| srec-max-retries, srec-frame, srec-noise, srec-sleep, |
| srec-echo-pace. |
| |
| * Makefile.in (remote-bug.o): new rule. |
| (ALLDEPFILES): added remote-bug.c |
| |
| * remote-hms.c (hms_wait): use -1 for timeout's which means block |
| forever rather than 99999. |
| |
| * ser-unix.c (get_tty_state): if a descriptor is not a tty, then |
| simply save encode this fact as the process group and return |
| success rather than an error. |
| (set_tty_state): if process group is -1, do not reset the |
| process group. |
| (hardwire_reachar): comment change. |
| |
| * serial.h: comment change. |
| |
| * config/m88k/tm-m88k.h: comment change to remove embedded |
| comment. |
| (SKIP_PROLOGUE): skip_prologue returns a value which is expected |
| to reset the pc argument. So reset it. |
| |
| Fri Aug 13 10:15:24 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * Makefile.in (VERSION): Bump to 4.10.1 after release and cvs |
| tagging. |
| |
| Thu Aug 12 20:40:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * gdbserver/Makefile.in: Use GDBSERVER_LIBS and |
| GDBSERVER_DEPFILES. Also remove much (but not all that could be |
| removed) crud inherited from gdb Makefile.in. |
| * config/i386/i386lynx.mh, config/sparc/sun4os4.mh: Define GDBSERVER_*. |
| * gdbserver/README: Say it works on Sun and change configuration |
| instructions slightly. |
| |
| Wed Aug 11 18:56:59 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com) |
| |
| * config/i386/i386v4.mh: use -lsocket and -lnsl, for remote |
| targets that use BSD style network connections |
| |
| Wed Aug 11 17:54:24 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote-{monitor,bug}.c: Make bug_ops not static (forward declaration |
| of statics doesn't work with SunOS4 /bin/cc). |
| Rename the occurrence in remote-monitor.c to monitor_bug_ops. |
| |
| Tue Aug 10 13:07:14 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * blockframe.c (find_pc_partial_function), |
| mips-tdep.c (find_proc_desc): Deal with "pathological" case. |
| |
| Tue Aug 10 14:50:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * utils.c (wrap_here): Allow indent to be NULL. |
| (fputs_filtered): Don't check for null wrap_indent (wrap_here now |
| guarantees that it isn't, and anyway we were only checking one out |
| of the two places we dereferenced it). |
| |
| * objfiles.h (struct objfile): Clean up comments for |
| {obj,sym}_private to clarify what they are private to. |
| |
| Mon Aug 9 16:45:00 1993 Stan Shebs (shebs@rtl.cygnus.com) |
| |
| * stabsread.c, buildsym.c (hashname): Moved function to |
| buildsym.c, as suggested in the sources. |
| |
| Mon Aug 9 09:53:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote-udi.c: Make udi_ops extern rather than trying forward |
| declaration of a static variable. |
| |
| * hppab-nat.c: Define ptrace to call_ptrace and pass the 5th arg |
| there, rather than using an ANSI C specific macro. |
| |
| * 29k-share/udi/udr.c: Include fcntl.h not sys/fcntl.h. Also put |
| sys/types.h near the top (just on general principles). |
| |
| * environ.c (set_in_environ): Remove G960BASE and G960BIN; they are |
| no longer used. |
| |
| * gdbcore.h: New variable gnutarget. |
| * core.c: Add commands to set and show it. |
| * Callers to bfd_*open*: Pass gnutarget instead of NULL as target. |
| * environ.c (set_in_environ): For GNUTARGET, use set_gnutarget not |
| putenv. |
| |
| * symtab.c (decode_line_1): Give error on unmatched single quote. |
| |
| Sun Aug 8 13:59:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * ser-unix.c (hardwire_send_break) [HAVE_SGTTY]: Use select not usleep. |
| |
| * remote.c: Add comments about 'd', 'r', and unrecognized requests. |
| |
| * inflow.c (terminal_init_inferior): Don't muck with tty state if |
| gdb_has_a_terminal() is false. |
| |
| Sun Aug 8 10:07:47 1993 Fred Fish (fnf@cygnus.com) |
| |
| * dwarfread.c (record_minimal_symbol): Remove prototype and |
| function. |
| * dwarfread.c (add_partial_symbol): Remove code to add minimal |
| symbols and remove comment about limitations. Experiments show |
| that now that gdb handles the ELF symtab better for creating |
| minimal symbols, that no additional information is added by |
| examining the DWARF information, and in fact, given the |
| limitations, the DWARF code was actually making things worse. |
| |
| Sat Aug 7 10:59:03 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * elfread.c (elf_symtab_read): Properly sort out the bss symbols |
| from the data symbols and give them the correct minimal_symbol_type. |
| Add file static symbols to the minimal symbol table, not just |
| global symbols. Add absolute symbols as well (like _edata, _end). |
| Redo stabs-in-elf special symbol handling now that file static |
| symbols are entered into the into the minimal symbol table. |
| * dwarfread.c (add_partial_symbol): Add comment about limitations |
| of DWARF symbols for distinquishing data from bss when adding |
| minimal symbols. Add file local symbols to minimal symbols. |
| |
| Thu Aug 5 08:58:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * ser-go32.c: Define job_control variable. |
| |
| Thu Aug 5 15:56:13 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com) |
| |
| * configure.in: z8k-coff is the same as z8k-sim |
| |
| Thu Aug 5 08:58:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * 29k-share/udi/udip2soc.c: Include sys/types.h before sys/file.h. |
| |
| * config/i386/tm-i386bsd.h (NUM_REGS): There are only 10, not 11. |
| |
| * inflow.c: Put all uses of F_GETFL and F_SETFL in #ifdef F_GETFL. |
| |
| * 29k-share/udi/udip2soc.c: Include fcntl.h not sys/fcntl.h. |
| |
| Wed Aug 4 18:32:12 1993 Fred Fish (fnf@cygnus.com) |
| |
| * inflow.c (pass_signal): Signal handlers take one int arg; |
| supply an unused one to make it type compatible as an arg to |
| signal(). |
| |
| Tue Aug 3 18:34:14 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * config/mips/tm-mips.h: Include bfd.h before coff/sym.h. |
| |
| Tue Aug 3 15:34:57 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (ALLCONFIG): Add config/i386/i386nw.mt, |
| config/m68k/delta68.mh, config/m68k/delta68.mt, |
| config/m68k/dpx2.mh, config/m68k/dpx2.mt, config/mips/riscos.mh, |
| config/mips/news-mips.mh. |
| * Makefile.in (ALLPARAM): Add config/i386/nm-symmetry.h, |
| config/i386/tm-i386nw.h, config/m68k/nm-delta68.h, |
| config/m68k/tm-delta68.h, config/m68k/xm-delta68.h, |
| config/m68k/nm-dpx2.h, config/m68k/tm-dpx2.h, |
| config/m68k/xm-dpx2.h, config/mips/xm-makeva.h. |
| * Makefile.in (ALLDEPFILES): Add dpx2-nat.c. |
| |
| Tue Aug 3 12:02:09 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mipsread.c: Updated for BFD ECOFF changes. Now gets the |
| swapping routines and external structure sizes via the |
| ecoff_backend information. No longer includes coff/mips.h. |
| |
| Tue Aug 3 10:58:04 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (SFILES): Add thread.c |
| |
| Tue Aug 3 10:21:58 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * remote-sp64sim.c (simif_create_inferior): Add FIXME regarding |
| sim_set_args return code. |
| |
| Mon Aug 2 16:35:31 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * Makefile.in (VERSION): bumped to 4.9.4. |
| |
| * remote-monitor.c: updated copyright. |
| (bug_ops, monitor_desc): now static. |
| (monitor_desc): in several places, check and/or set to NULL. |
| |
| * remote-hms.c (hms_files_info): Add the appropriate items where |
| missing in the printf call. |
| |
| * remote-bug.c: new file for m88k bug support. |
| |
| * config/m88k/m88k.mt (TDEPFILES): added remote-bug.o. |
| |
| Mon Aug 2 14:22:09 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) |
| |
| * h8300-tdep.c: Use new variable h8300hmode. |
| |
| Mon Aug 2 12:06:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * valops.c (typecmp): If we are passing a non-reference to a function |
| which takes a reference, pass the address. |
| (value_arg_coerce): Don't use COERCE_ENUM; we don't want to dereference |
| references here. |
| |
| * thread.c (thread_switch): Define as static. |
| (add_thread): Cast return value from xmalloc. |
| |
| * gdbtypes.c (fill_in_vptr_fieldno): Call check_stub_type. |
| * gdbtypes.{c,h}: Improve comments on vptr_fieldno. |
| |
| Mon Aug 2 11:58:52 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * README: Elaborate on gdb C++ support and cfront support. |
| |
| Mon Aug 2 11:30:57 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * i386lynx-nat.c, thread.c, thread.h: Update copyrights. |
| |
| Mon Aug 2 12:06:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in (ALLDEPFILES): Add i386lynx-nat.c. |
| |
| Mon Aug 2 08:42:50 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * gdbserver/remote-inflow.c (create_inferior): Fix comments, and |
| error msg. Setup seperate process group for child. |
| * (write_inferior_memory): Sleep for 1 second and retry on ptrace |
| failure. |
| |
| Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * config/i386/i386lynx.mh (NATDEPFILES): Drop coredep (for now). |
| * config/i386/nm-i386bsd.h: Protect from multiple inclusion. |
| * config/i386/nm-i386lynx.h: Lotsa new host porting stuff. |
| * config/i386/tm-i386lynx.h: Define SAVED_PC_AFTER_CALL and |
| target_pid_to_str. |
| |
| * Makefile.in (CLIBS): Reorder to make Lynx ld happy. |
| * (HFILES): New file thread.h. |
| * (OBS): New file thread.c. |
| * configure.in: Host config for Lynx/386. |
| * fork-child.c (fork_inferior): Call init_thread_list(). |
| * infrun.c (resume): Add pid to invocation of target_resume(). |
| * (wait_for_inferior): Pay attention to pid from target_wait(). |
| Multi-threading code now uses this to determine what to do. |
| * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. |
| Use target_pid_to_str() macro throughout when printing pid. |
| * inferior.h (child_resume): Add pid to prototype. |
| * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as |
| argument, instead of using inferior_pid. |
| * procfs.c (procfs_resume): Pass in pid as argument. Ignored for |
| now. Use target_pid_to_str() macro throughout for printing process id. |
| * remote-adapt.c (adapt_resume): Pass in pid as argument. |
| * remote-eb.c (eb_resume): Pass in pid as argument. |
| * remote-es.c (es1800_resume): Pass in pid as argument. |
| * remote-hms.c (hms_resume): Pass in pid as argument. |
| * remote-mips.c (mips_resume): Pass in pid as argument. |
| * remote-mm.c (mm_resume): Pass in pid as argument. |
| * remote-monitor.c (monitor_resume): Pass in pid as argument. |
| * remote-nindy.c (nindy_resume): Pass in pid as argument. |
| * remote-sa.sparc.c (remote_resume): Pass in pid as argument. |
| * remote-sim.c (rem_resume): Pass in pid as argument. |
| * remote-sp64sim.c (simif_resume): Pass in pid as argument. |
| * remote-st.c (st2000_resume): Pass in pid as argument. |
| * remote-udi.c (udi_resume): Pass in pid as argument. |
| * remote-vx.c (vx_resume): Pass in pid as argument. |
| * remote-z8k.c (rem_resume): Pass in pid as argument. |
| * remote.c (remote_resume): Pass in pid as argument. |
| * solib.c (solid_create_inferior_hook): Pass inferior_pid to |
| target_resume(). |
| * target.c (normal_pid_to_str): New routine to print out process |
| ID normally. |
| * target.h (struct target_ops): Add pid to prototype at |
| to_resume(). (target_resume): Add pid argument. |
| * (target_pid_to_str): Default definition for normal type pids. |
| * thread.h, thread.c: New modules for multi thread/process control. |
| |
| Sun Aug 1 13:02:42 1993 John Gilmore (gnu@cygnus.com) |
| |
| * README: Say that bug-gdb is also the place to send requests |
| for help with GDB. |
| |
| Sun Aug 1 09:42:13 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (make-proto-gdb-1): Use -f opt on rm of Makefile. |
| * h8500-tdep.c: Add parens around a few macro args. |
| |
| Fri Jul 30 15:43:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * TODO: Remove items about unix-to-unix/rapp debugging (now we |
| have gdbserver), moving xm files to subdirectory, ptype yylval, |
| and file-local symbols. |
| |
| * gdbtypes.h: Improve comments about C++ methods. |
| |
| Fri Jul 30 14:16:32 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * c-exp.y: Add missing 5th arg for one call to lookup_symbol, cast |
| NULL in all other calls to correct pointer types. |
| |
| Fri Jul 30 15:43:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| From Jeffrey Law: |
| * tm-hppa.h (TARGET_WRITE_PC): Define. |
| * hppa-tdep.c (hppa_fix_call_dummy): If in a syscall, |
| then return the address of the dummy itself rather than |
| the address of $$dyncall. |
| (target_write_pc): New function to store a new PC. |
| |
| Fri Jul 30 12:51:27 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| and Jim Kingdon (kingdon@cygnus.com) |
| |
| * breakpoint.c (breakpoint_re_set_one): Always reparse breakpoint |
| conditions, they might contain symbol table references. |
| |
| Fri Jul 30 12:51:27 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (parse_symbol): Handle opaque struct definitions and |
| type naming for stTypedef symbols. |
| |
| Fri Jul 30 14:44:21 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * c-exp.y (yylex): Detect C++ nested types. |
| |
| Fri Jul 30 11:07:37 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * sp64-tdep.c (sparc64_frame_chain, sparc64_frame_saved_pc): Deleted. |
| (dump_ccreg, sparc_print_register_hook): New fns. |
| * remote-sim.h: New file. |
| * remote-sp64sim.h (sim_*): External fns. (simif_*): Internal fns. |
| |
| * config/sparc/sp64.mt: New file. |
| * config/sparc/tm-sp64.h (FRAME_CHAIN, FRAME_SAVED_PC): Deleted. |
| (PRINT_REGISTER_HOOK): Call new fn sparc_print_register_hook. |
| |
| Fri Jul 30 10:15:01 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * Makefile.in (ALLCONFIG): Add config/i386/ptx.mh |
| |
| Fri Jul 30 08:58:01 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| From J. Law: |
| * infcmd.c (read_pc): Remove PA specific code. |
| * tm-hppa.h (TARGET_READ_PC): Define. |
| * hppa-tdep.c (target_read_pc): New function. |
| |
| * symtab.c (gdb_mangle_name): Deal with it if type lacks a name. |
| |
| Fri Jul 30 07:36:53 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * NEWS: Add note that DEC alpha support is host only, not native. |
| * README: Emphasize that C++ support works best with GNU C++ and |
| stabs debugging format. |
| * delta68-nat.c: Add missing FSF copyright. |
| |
| Fri Jul 30 08:58:01 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * paread.c (pa_symtab_read): Put file-local symbols in minimal symbols. |
| * hppa-tdep.c (frame_chain_valid): Check that our function has the |
| same address as _start, not that it must be the same symbol. |
| |
| Fri Jul 30 00:18:40 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * Makefile.in (ALLDEPFILES): Add delta68-nat.c |
| * Makefile.in (delta68-nat.o): Add dependency. |
| |
| Thu Jul 29 12:09:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * value.h (COERCE_ENUM): Use COERCE_REF to coerce refs; value_ind |
| was adequate in gdb 3.5 but not now. |
| |
| * valops.c (typecmp): An array in t2 matches a pointer in t1. |
| |
| * valops.c (typecmp): When comparing type1& to type2, compare |
| type1 and type2 as leniently as if we were comparing type1 to |
| type2. |
| |
| * cp-valprint.c (cplus_print_value): Don't dump core if the |
| baseclass doesn't have a name. |
| * values.c (vb_match): New function, which finds the virtual |
| base class pointer even if the types are nameless. |
| (baseclass_{addr,offset}): Use it. |
| |
| * hppa-tdep.c: Make "maintenance print unwind" command from old |
| "unwind" command. |
| |
| * remote-udi.c: Remove udi_timer, call to siginterrupt, and associated |
| obsolete junk which apparently had been copied from the |
| pre-serial.h remote.c, but which is no longer used. |
| |
| Thu Jul 29 12:36:20 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * Makefile.in (NONSRC): Need 29k-share/README, not |
| 29k-share/udi/README. |
| |
| Thu Jul 29 12:09:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * paread.c (pa_symfile_init): If error reading string table, don't |
| use errno in cases where it hasn't been set. |
| |
| * ser-unix.c (gdb_setpgid): Pass our pid, not 0, to setpgid. |
| |
| * remote-monitor.c (_initialize_monitor): Comment out use of |
| connect_command, since connect_command itself is commented out. |
| |
| * remote-monitor.c (generic_open): Parse arguments the same way |
| as remote.c. |
| |
| * hppa-tdep.c (pc_in_linker_stub): Fix unclosed comments. |
| |
| Wed Jul 28 13:19:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/mips/xm-mips.h: Define HAVE_TERMIOS. |
| |
| * dbxread.c (record_minimal_symbol): Don't put gcc_compiled or |
| __gnu_compiled* symbols into the minimal symbols. |
| |
| Wed Jul 28 08:26:58 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * remote-mips.c (_initialize_remote_mips): Added "timeout" and |
| "retransmit-timeout" variables to set mips_receive_wait and |
| mips_retransmit_wait, respectively. |
| |
| Wed Jul 28 03:58:58 1993 (pes@regent.e-technik.tu-muenchen.de) |
| |
| * symmisc.c (dump_msymbols): Handle new mst_file_* types. |
| |
| Tue Jul 27 12:07:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * remote-udi.c: Remove old comment about download not implemented. |
| |
| * serial.h, ser-{unix,go32,tcp}.c: Add flush_input and send_break. |
| * nindy-share/*, remote-nindy.c: Extensive hacking to make it |
| conform to GDB conventions like using memcpy not bcopy, serial.h, |
| etc. This is to make it host on Solaris, AIX, etc. |
| * Makefile.in: Reflect removed nindy-share files. |
| * config/i960/nindy960.mt (TDEPFILES): Remove ttybreak.o. |
| |
| * stack.c (print_frame_info): Revise comment about `pathological' |
| case (there was a wrong FIXME about text labels; also asm() can |
| trigger this as well as versions of ar which truncate .o names). |
| |
| * buildsym.c (start_subfile): If a .c file includes a .C file, set |
| the language of both of them to C++. |
| |
| * config/sparc/xm-sun4os4.h: Define MEM_FNS_DECLARED and include |
| <memory.h>. |
| Include <malloc.h> rather than declaring malloc functions ourself. |
| |
| * ser-unix.c (set_tty_state): Don't ignore errors setting process |
| group. |
| * inflow.c (terminal_inferior): If attach_flag set, ignore errors |
| from set_tty_state. |
| |
| * fork-child.c (fork_inferior): Only quote exec file if needed. |
| |
| * mipsread.c (parse_symbol): Remove 21 Jul 93 change with |
| stTypedef inside an stBlock. |
| |
| Tue Jul 27 12:36:49 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * breakpoint.c (breakpoint_1): Walk the breakpoint chain to decide if |
| we have breakpoints or watchpoints as we might have to ignore internal |
| breakpoints. |
| |
| Fix gdb core dumps after `file newfile' commands. |
| * symtab.h, symfile.c (clear_symtab_users): New routine which |
| unconditionally clears symtab users. clear_symtab_users_once |
| commented out as it was a noop anyway. |
| * objfiles.c (free_objfile): Don't call clear_symtab_users_once. |
| * objfiles.c (free_all_objfiles), symfile.c (new_symfile_objfile), |
| xcoffexec.c (exec_close): Call clear_symtab_users if necessary. |
| * symfile.c (syms_from_objfile): Install cleanups for errors during |
| symbol reading. |
| * coffread.c, dbxread.c, mipsread.c, xcoffread.c (*_symfile_read): |
| Lint cleanup code, call do_cleanups explicitly. |
| * symfile.c (symbol_file_add): Call new_symfile_objfile and |
| reinit_frame_cache _after_ the new symbols are read in. |
| |
| Tue Jul 27 01:57:01 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (parse_type): Do not set tag name for compiler |
| generated fake tag names. |
| |
| Mon Jul 26 17:31:49 1993 K. Richard Pixley (rich@rtl.cygnus.com) |
| |
| * config/m88k/m88k.mt (TDEPFILES): add exec.o. |
| |
| Mon Jul 26 13:17:36 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * hppa-tdep.c: Remove all uses of use_unwind and `set use_unwind' |
| command. Now we use unwind info by default if we can find it. |
| |
| * config/sparc: Move VARIABLES_INSIDE_BLOCK and SUN_FIXED_LBRAC_BUG |
| to tm-sparc.h so they are shared between Solaris and SunOS4. |
| * dbxread.c (process_one_symbol): Deal with SunOS4 acc N_STSYM and |
| N_GSYM functions. |
| |
| * config/pa/tm-hppa.h (REGISTER_NAMES): Use "fr" rather than "fp" |
| for floating point registers. |
| |
| * mipsread.c (parse_symbol): Put stStaticProc symbols in minimal |
| symbols as mst_file_text. |
| |
| * hppa-tdep.c (pc_in_linker_stub): Return 0 if can't read memory. |
| |
| * stabsread.c (rs6000_builtin_type): Make logical types be |
| TYPE_CODE_BOOL. |
| |
| Sun Jul 25 23:41:48 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * breakpoint.{c,h} (struct breakpoint): Replace symtab field with |
| source_file field. |
| |
| Fri Jul 23 09:57:25 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * remote.c: Don't error() on errors xferring memory. |
| * target.h: Clean up comments about *xfer_memory. |
| |
| * exec.c, corelow.c (target_ops struct): Don't allow |
| {insert,remove}_breakpoints to be defaulted to |
| memory_{insert_remove}_breakpoint. |
| |
| * demangle.c: Make it so `help set dem' tells you how to get the |
| list of demangling styles. |
| |
| Thu Jul 22 15:41:09 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * Makefile.in: Use REMOTE_O macro not remote.o. |
| * config/i960/{nindy960,vxworks960}: Don't use remote.o. |
| |
| Thu Jul 22 12:43:25 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * coredep.c: If NEED_SYS_CORE_H defined, include <sys/core.h> |
| (can't include it in nm-*.h file because it causes conflicts with |
| a.out symbol definitions). |
| * hp300ux-nat.c (fetch_core_registers): Commented out; obsolete. |
| * config/m68k/hp300hpux.mh (NATDEPFILES): Added coredep.o and |
| corelow.o. |
| * config/m68k/nm-hp300hpux.h (NEED_SYS_CORE_H): Defined. |
| (REGISTER_U_ADDR): Defined. |
| * config/m68k/xm-hp300hpux.h (HAVE_TERMIOS): Define instead of |
| HAVE_TERMIO. |
| * config/pa/xm-hppah.h: Likewise. |
| |
| Wed Jul 21 11:37:30 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * mipsread.c (parse_symbol): when stTypedef and friends occur within |
| an stBlock, skip over the fields of the inner one. |
| |
| * mips-tdep.c (init_extra_frame_info): If in lenient prologue, call |
| heuristic_proc_desc rather than just assuming registers not saved. |
| |
| * Makefile.in (regex.o): Add dependency. |
| |
| * hppa{b,h}-nat.c: Warning, not error, if can't access registers. |
| |
| * config/pa/hppa{b,h}.h: Define ATTACH_DETACH. |
| |
| Wed Jul 21 03:07:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * config/mips/xm-makeva.h: New file implements va_list alignment |
| restrictions for mips hosts. |
| * config/mips/{xm-irix3.h, xm-mips.h, xm-news-mips.h, xm-riscos.h}: |
| Use it. |
| |
| Wed Jul 21 00:11:05 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mips-tdep.c (init_extra_frame_info): Do not check for |
| mips_in_lenient_prologue if it is a dummy frame. |
| * mipsread.c (fixup_sigtramp): Initialize pdr.adr, it is used by |
| mips_in_lenient_prologue. |
| |
| Tue Jul 20 14:14:59 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c (read_hp_array_type): Handle "char foo[]". |
| |
| Tue Jul 20 12:53:47 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * mips-tdep.c (heuristic_proc_start): First time we print the |
| warning, elaborate. |
| (_initialize_mips_tdep): Improve docstring for `set heur'. |
| |
| * config/rs6000/tm-rs6000.h: Remove call to insert_step_breakpoint. |
| |
| * symtab.c (find_line_symtab): New function, to deal with multiple |
| symtabs with the same name. |
| (find_line_pc{,_range}): Use it. |
| (find_pc_symtab): Add comment about overlapping symtabs. |
| |
| Mon Jul 19 21:29:14 1993 Fred Fish (fnf@deneb.cygnus.com) |
| |
| * Makefile.in (SFILES): Add nlmread.c. |
| * Makefile.in (OBS): Add nlmread.o. |
| * Makefile.in (nlmread.o): Add new target. |
| * configure.in (i[34]86-*-netware): New configuration. |
| * nlmread.c, config/i386/{i386nw.mt, tm-i386nw.h}: New files |
| for NLM/NetWare support. |
| |
| Mon Jul 19 11:48:57 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * symtab.h (enum minimal_symbol_type): Add mst_file_*. |
| * partial-stab.h [DBXREAD_ONLY]: Record statics in miminal symbols. |
| * dbxread.c (record_minimal_symbol): Deal with statics. |
| * minsyms.c (lookup_minimal_symbol): Prefer externals to statics. |
| |
| * config/i386/xm-i386sco.h: Define HAVE_TERMIOS. |
| |
| * printcmd.c, config/pa/xm-pa.h, config/alpha/xm-alpha.h: Make it so |
| arg_bytes field of makeva_list is always aligned. |
| * config/pa/xm-pa.h: Make arglist_address a char *. |
| |
| * ser-unix.c: Don't try to use job control with termio. |
| |
| Sun Jul 18 23:11:28 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| and Jim Kingdon (kingdon@cygnus.com) |
| |
| Make breakpoint_re_set_one work with overloaded member functions, |
| `b 123' and `b foo' if foo is a static function. |
| * symtab.c (decode_line_1, decode_line_2): New argument `canonical' |
| to return canonical line specs if requested by the caller. |
| * breakpoint.c, source.c, symtab.c, symtab.h: Change prototypes and |
| callers accordingly. |
| * symtab.c (build_canonical_line_spec): New helper function which |
| constructs the canonical line spec. |
| * breakpoint.c (break_command_1): Use canonical line spec instead |
| of command string as addr_string if necessary. |
| * source.c (line_info): Fix storage leak. |
| |
| Sun Jul 18 15:22:45 1993 Jim Kingdon (kingdon@rtl.cygnus.com) |
| |
| * infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL |
| but not the others. |
| * symm-tdep.c: Remove exec_file_command. |
| [_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions. |
| A few miscellaneous cleanups. |
| * symm-nat.c: Renamed from symm-xdep.c. |
| * All symmetry dependent files: Many changes. |
| |
| * mips-tdep.c (mips_skip_prologue): New argument lenient. |
| Use read_memory_nobpt. |
| (is_delayed, mips_in_lenient_prologue): New functions. |
| (init_extra_frame_info): If in the prologue, don't use saved registers. |
| * config/mips/tm-mips.h: Declare mips_skip_prologue. |
| |
| * partial-stab.h (N_SO): Add the text offset to valu before, not after, |
| passing it to END_PSYMTAB. |
| |
| Fri Jul 16 18:48:52 1993 Jim Kingdon (kingdon@rtl.cygnus.com) |
| |
| * symtab.c (find_pc_symtab): Call warning, not printf directly. |
| |
| * solib.c (solib_add): Use x{re,m}alloc, not {re,m}alloc. |
| |
| Fri Jul 16 09:56:42 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mipsread.c: No longer need to undefine ZMAGIC. |
| |
| Thu Jul 15 18:03:37 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * m88k-pinsn.c: Moved code into opcodes/m88k-dis.c. |
| (print_insn): Now just calls print_insn_m88k. |
| |
| Thu Jul 15 14:54:05 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * h8300-tdep.c (examine_prologue): Make prototype match definition. |
| |
| Thu Jul 15 08:34:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * NEWS: Mention that remote.c now has a `load' operation. |
| |
| * hppa-tdep.c (pc_in_linker_stub): New function. |
| (find_proc_framesize): Return 0 for linker stubs. |
| (rp_saved): Tell the caller where rp is saved. |
| (frame_chain_valid): Return 1 for linker stubs. |
| (frame_saved_pc): Use return value from rp_saved. |
| |
| * stack.c (print_frame_info): When checking PC_IN_CALL_DUMMY, |
| pass the sp relative to the frame in question, not the sp in the |
| innermost frame. |
| |
| Wed Jul 14 17:37:03 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * mipsread.c (parse_procedure): Take as argument the symtab to look |
| the name up in. Look it up with mylookup_symbol, not lookup_symbol. |
| (psymtab_to_symtab_1): For stabs, pass the symtab to parse_procedure. |
| |
| * mipsread.c (mylookup_symbol): Use strcmp, not STREQ, as we have |
| already checked the first characters. |
| |
| Changes from Jeffrey Law: |
| * printcmd.c (makeva_list): Use MAKEVA_EXTRA_INFO to define |
| machine dependent fields in the makeva_list structure. |
| (makeva_size): Allocate extra space to handle gaps made by |
| alignment restrictions. |
| * config/pa/xm-pa.h (MAKEVA_EXTRA_INFO): Define. |
| (MAKEVA_START): Initialize arglist_address field. |
| (MAKEVA_ARG): Always store arguments on natural alignment |
| boundaries. Set arglist_address to the address right after |
| the args. |
| (MAKEVA_END): Simply return the value stored in arglist_address. |
| |
| Wed Jul 14 13:51:54 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * ch-valprint.c (chill_val_print, case TYPE_CODE_STRING): Print |
| address, not addr. |
| |
| * hppah-nat.c (store_inferior_registers): Don't print i in cases |
| where we aren't using it. |
| |
| * a29k-tdep.c (get_saved_register): Fix typo. |
| |
| Wed Jul 14 09:45:52 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * configure.in: Recognize h8300h (variant of h8300). |
| |
| Wed Jul 14 09:45:52 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * configure.in: Recognize sparc64-*-*. |
| |
| Tue Jul 13 14:03:48 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c (define_symbol): Make the caddr_t hack apply to `function |
| returning foo' as well as `pointer to foo'. |
| |
| * remote.c [REMOTE_BREAKPOINT]: Use for breakpoint insn if defined. |
| * config/m68k/tm-m68k.h: Define it. |
| * mem-break.c, breakpoint.c: Improve comments. |
| |
| Tue Jul 13 13:35:31 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr) |
| |
| * config/m68k/tm-dpx2.h: Replace "tm-68k.h" with "m68k/tm-m68k.h". |
| * config/m68k/xm-dpx2.h: Define HAVE_TERMIOS not HAVE_TERMIO. |
| |
| Tue Jul 13 11:50:38 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * gdbcore.h (read_memory_integer, read_memory_unsigned_integer): |
| Make prototype match definition. |
| |
| Tue Jul 13 11:15:15 1993 Fred Fish (fnf@cygnus.com) |
| |
| * elfread.c: Remove notice about file still being under |
| construction. |
| * Makefile.in (ultra3-xdep.o, umax-xdep.o): Add missing ')'. |
| |
| Mon Jul 12 17:46:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * a29k-tdep.c (read_register_stack): Make val static. |
| |
| Mon Jul 12 14:10:48 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * config/h8300/tm-h8300.h (REGISTER_CONVERTIBLE): Change value to 0. |
| (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Move def'n to |
| usual spot. |
| |
| Mon Jul 12 11:29:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * c-valprint.c (c_val_print): Fix thinko with unspecified length |
| arrays. |
| |
| * hppa-tdep.c (find_proc_framesize): If there is a frame pointer, |
| use it. |
| |
| Sun Jul 11 19:35:05 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * symtab.c (decode_line_1): Use end of block to figure out whether |
| val.end is in the same function, not minimal symbols. |
| |
| * source.c (line_info): Add a few more wrap_here's. |
| |
| * i386-tdep.c (i386_follow_jump): Do byteswapping where needed and |
| don't make assumptions about sizes of host data types. |
| |
| * blockframe.c, symtab.h (find_pc_partial_function): New arg endaddr. |
| * infrun.c, breakpoint.c, printcmd.c: Change callers. |
| * printcmd.c (containing_function_bounds): Remove. |
| * printcmd.c (disassemble_command): Use find_pc_partial_function, |
| not containing_function_bounds. |
| * infcmd.c (step_1): Use find_pc_partial_function rather than |
| trying to roll our own. Move check for a pc between SIGTRAMP_START and |
| SIGTRAMP_END in find_pc_partial_function, not step_1. |
| |
| * sparc-tdep.c (sparc_frame_chain, frame_saved_pc): |
| Keep unswapped value in array of char, not REGISTER_TYPE. |
| Use REGISTER_RAW_SIZE not sizeof (REGISTER_TYPE). |
| (sparc_extract_struct_value_address): Use TARGET_PTR_BIT not |
| sizeof (CORE_ADDR). |
| |
| Thu Jul 1 15:50:05 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr) |
| |
| * configure.in (m68*-bull-sysv*): added support for Bull dpx2. |
| * config/m68k/{t,x,n}m-dpx2.h, dpx2-nat.c: New files. |
| * config/m68k/dpx2.m{h,t}: New files. |
| |
| Thu Jul 1 15:46:10 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c: Run through gnu-indent. |
| |
| Sun Jul 11 12:32:08 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Fix typo, add |
| more parens around macro arg. |
| |
| Sat Jul 10 09:54:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * infrun.c: Remove step_resume_{duplicate,shadow}. Replace |
| step_resume_break_address with step_resume_breakpoint (now local |
| to wait_for_inferior). |
| ({insert,remove}_step_breakpoint): Remove. |
| (wait_for_inferior): Set step resume break with |
| set_momentary_breakpoint. Test hitting it with bpstat_stop_status |
| and bpstat_what (stop_step_resume_break removed). |
| * breakpoint.{h,c}, infrun.c: Return value from bpstat_what now struct |
| which includes previous return value as main_action, and a step_resume |
| bit. |
| * breakpoint.c (delete_breakpoint): If breakpoint was inserted, and |
| there is another breakpoint there, insert it. |
| * infrun.c (wait_for_inferior): Rearrange the spaghetti a bit. Use |
| a few more gotos. |
| Various: Clean up and add comments. |
| |
| * infrun.c [TDESC]: Remove remaining tdesc code (see ChangeLog |
| for Wed Nov 13 16:45:13 1991). |
| |
| Fri Jul 9 12:36:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * values.c, value.h (modify_field), callers: Make fieldval a LONGEST. |
| |
| * h8300-tdep.c (NEXT_PROLOGUE_INSN): Make pword1 an INSN_WORD * |
| not short *. |
| |
| * findvar.c, defs.h |
| ({extract,store}_{signed_integer,unsigned_integer,address}): |
| New routines to replace SWAP_TARGET_AND_HOST. |
| All over: All uses of SWAP_TARGET_AND_HOST on integers replaced. |
| |
| * config/sparc/tm-sparc.h: Add comment suggesting that removing |
| ins and locals from the registers array might clean things up. |
| |
| * utils.c: Clean up comments about wrap buffer and wrap_here. |
| * printcmd.c (printf_command): Call wrap_here before vprintf. |
| |
| * mipsread.c (cross_ref): Set the name to unknown for "struct *" case. |
| Patch from ptf@delcam.co.uk (Paul Flinders). |
| |
| * a29k-tdep.c, findvar.c (get_saved_register): Fix byteswapping sins. |
| |
| Fri Jul 9 09:47:02 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * defs.h, remote-eb.c (TM_FILE_OVERRIDE): Remove it. |
| * mips-tdep.c (init_extra_frame_info): Set proper fci->frame if pc |
| is at the start of the dummy code. |
| |
| Thu Jul 8 14:48:54 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * sparc-tdep.c (sparc_push_dummy_frame): Skip all the do_save_insn |
| stuff, just write the sp and fp. |
| (sparc_pop_frame): Skip the do_restore_insn; we already restore |
| the sp with the other out registers. |
| |
| * hppa-tdep.c (hppa_push_arguments): Allocate enough space for |
| arguments. |
| |
| * hppa-tdep.c: Change _initialize_hppab_tdep to _initialize_hppa_tdep. |
| |
| Thu Jul 8 14:47:00 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * sparc-tdep.c (sparc_frame_chain): Handle sizeof (CORE_ADDR) |
| != sizeof (REGISTER_TYPE). |
| (frame_saved_pc): Ditto. |
| |
| Thu Jul 8 08:22:05 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * config/h8300/tm-h8300.h: (REGISTER_TYPES): Adjust for h8/300h. |
| (REGISTER_RAW_SIZE): Ditto. |
| (REGISTER_VIRTUAL_TYPE): Use builtin_type_unsigned_long for regs |
| on the h8/300h (ints may still be 16 bits). |
| (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, |
| EXTRACT_STRUCT_VALUE_ADDRESS): Add FIXME's for h8/300h. Some |
| thought needed here. |
| |
| * h8300-tdep.c (print_insn): Call print_insn_h8300h if h8/300h. |
| (examine_prologue): reg_save_depth is 4 if h8/300h. |
| |
| * findvar.c (read_register): Provide some support for 64 bit regs. |
| (write_register): Ditto. |
| |
| Wed Jul 7 14:30:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/mips/nm-riscos.h: machine/machparam.h is always the right |
| place to look for BSD43_NBPG, not machine/vmparam.h |
| |
| * infcmd.c (run_stack_dummy): New argument name. |
| Change error message in (another) attempt to make it comprehensible. |
| * valops.c (call_function_by_hand): Pass name to run_stack_dummy. |
| * symtab.h: Declare demangle and asm_demangle since macros use them. |
| |
| * eval.c (evaluate_subexp): Add comment about calling a member |
| function of a variable in a register. |
| |
| * expression.h: Clean up comment about string in STRUCT_STRUCT etc. |
| |
| * config/{rs6000/tm-rs6000.h,sparc/tm-sparc.h,pyr/tm-pyr.h}, |
| inferior.h (PC_IN_CALL_DUMMY) [ON_STACK]: Add comments about stack |
| frame tops and bottoms. |
| |
| * frame.h, blockframe.c, stack.c, a29k-tdep.c, |
| config/gould/tmp-{pn,np1}.h, |
| config/{sparc/tm-sparc.h,pyr/tm-pyr.h,vax/tm-vax.h}: Remove field |
| next_frame from struct frame_info. It has no purpose beyond |
| ->next->frame and is an artifact from GDB 2.8. |
| |
| Tue Jul 6 11:51:18 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in: Remove gdb before creating a new one. |
| Update init.c atomically. |
| |
| * Makefile.in (ALLPARAM): Add config/{alpha/xm-alpha.h,pa/xm-pa.h}. |
| (ALLCONFIG): Add config/alpha/alpha-osf1.mh. |
| |
| * infcmd.c (_initialize_infcmd): In docstring for "continue", |
| describe argument as setting ignore count. |
| |
| Sun Jul 4 15:04:47 1993 Doug Evans (dje@cygnus.com) |
| |
| * h8300-tdep.c (examine_prologue): Fix call to |
| read_memory_unsigned_integer. |
| |
| Fri Jul 2 18:22:54 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/mips/{x,n}m-irix{3,4}.h: Make some definitions here |
| rather than including xm-bigmips.h. |
| |
| * eval.c (evaluate_subexp): Improve error messages for OP_TYPE and |
| default cases. |
| |
| * Makefile.in (distclean): Remove y.tab.h. |
| |
| Fri Jul 2 14:55:48 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * exec.c (exec_file_command): Remove Mar 28 hack as BFD handles |
| file updates properly now. |
| * mipsread.c (mips_coff_new_init): Force reevaluation of sigtramp |
| addresses if switching to a new symbol file. |
| * dbxread.c (process_one_symbol): Avoid dereferencing NULL |
| symbols that might be returned from define_symbol. |
| |
| Fri Jul 2 13:33:12 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) |
| |
| New target macros for getting at the pc, sp and fp. |
| * infcmd.c (read_pc, write_pc): Modify to use new macros. |
| (read_sp, write_sp, read_fp, write_fp): New functions. |
| * blockframe.c (reinit_frame_cache, get_prev_frame_info): |
| Use new functions. |
| * breakpoint.c (bpstat_alloc): ditto. |
| * infrun.c (wait_for_inferior): ditto. |
| * stack.c (print_frame_info): ditto. |
| * valops (call_function_by_hand): ditto. |
| * corelow.c (core_open): ditto. |
| * h8500-tdep.c: (target_read_sp, target_write_sp, target_read_pc, |
| target_write_pc, target_read_fp, target_write_fp): New functions. |
| * inferior.h (read_sp, write_sp, read_fp, write_fp): Prototypes. |
| |
| * config/alpha/xm-alpha.h: Add MAKEVA_END. |
| * config/h8500/tm-h8500.h: Define new macros. |
| |
| Fri Jul 2 13:51:04 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * configure.in (mipos-*-riscos*): New host and target; use riscos. |
| * config/mips/nm-riscos.h: If BSD43_NBPG is not defined by |
| vmparam.h, include machparam.h. |
| (KERNEL_U_ADDR): Define to be BSD43_UADDR. |
| |
| Fri Jul 2 13:39:48 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * c-exp.y (yylex): Give error if unmatched single quote. |
| |
| * configure.in, config/m68k/*delta68*, delta68-nat.c: New port. |
| |
| * Remove unused STACK_END_ADDR in the following files (in other |
| files it is used for something): tm-mips.h, tm-sun2.h, tm-news.h, |
| tm-a29k, tm-i386v.h, tm-hppa.h, tm-nindy960.h, tm-amix.h, |
| tm-hp300hpux.h, tm-isi.h. |
| |
| Thu Jul 1 09:51:27 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * config/mips/nm-riscos.h: Define NBPG and UPAGES. |
| config/mips/xm-riscos.h: Include <sys/types.h>. |
| |
| * ser-unix.c (hardwire_noflush_set_tty_state): Use an assignment, |
| not an initializer, to copy the structure. |
| |
| * gdbtypes.h (struct type): Add field tag_name. |
| * gdbtypes.c (type_name_no_tag), c-typeprint.c (c_type_print_base): |
| Use it. |
| * {coff,dwarf,mips,stabs}read.c: Set it. |
| |
| * xm-sysv4.h: Undefine HAVE_TERMIO. |
| |
| * config/mips/nm-riscos.h: Remove unmatched #endif. |
| Define FETCH_INFERIOR_REGISTERS. |
| * config/mips/riscos.mh: Don't include coredep.o; mips-nat.o is enough. |
| Fix misspelling of NAT_FILE. |
| * mips-nat.c (fetch_core_registers): If KERNEL_U_ADDR is not defined, |
| we can still process "modern" core files. |
| |
| * ser-unix.c (hardwire_print_tty_state) [HAVE_TERMIOS]: Don't |
| print c_line. |
| (_initialize_ser_hardwire): Just check whether _POSIX_JOB_CONTROL |
| is defined; don't care what it is defined to. |
| |
| Wed Jun 30 20:06:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/vax/xm-vaxult2.h: Define FD_SET and FD_ZERO. |
| |
| Tue Jun 29 11:02:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * inftarg.c: Remove unused include of terminal.h. |
| * signals.h: Don't undefine signals anymore. |
| * main.c: Use job_control from serial.h. |
| * fork-child.c (fork_inferior): Use gdb_setpgid. |
| * serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid. |
| * utils.c (quit): Use current_target->to_terminal_ours to figure |
| out whether we care about lack of job control, rather than __GO32__. |
| * utils.c: Include serial.h not terminal.h |
| (quit): Use job_control not TIOCGPGRP. |
| * terminal.h: Don't undefine TIOCGPGRP. |
| * serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT. |
| * utils.c (quit): Use it. |
| * serial.h: Add SERIAL_UN_FDOPEN. |
| * utils.c (quit): Use it. |
| * ser-unix.c: Add process group to ttystate. |
| [HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate. |
| * inflow.c: Include serial.h not terminal.h. |
| Use serial.h stuff to replace most of the maze of #ifdef's. |
| * inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function. |
| * serial.h: Document SERIAL_SET_TTY_STATE as being immediate. |
| * ser-unix.c: Use TIOCSETN not TIOCSETP so it is true. |
| * serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: |
| Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and |
| SERIAL_SET_PROCESS_GROUP. |
| * inflow.c: Use them. |
| * config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h: |
| Define HAVE_TERMIOS. |
| * Various: Remove all use of TIOC*_BROKEN. |
| |
| Wed Jun 30 12:20:51 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * config/m68k/tm-sun3.h (BELIEVE_PCC_PROMOTION_TYPE): Define. |
| |
| Tue Jun 29 13:44:41 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * target.h (target_detach): Turn macro into function. |
| * target.c (target_detach): Define it, do deferred register stores |
| before calling the real target function. |
| |
| Tue Jun 29 13:15:42 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| and Jim Kingdon (kingdon@cygnus.com) |
| |
| * symtab.h (BLOCK_SHOULD_SORT): Do not sort blocks corresponding to |
| a function to avoid printing of function arguments in wrong order |
| due to sorting. |
| * symfile.c (compare_symbols): Remove code for sorting arguments |
| as blocks containing arguments are no longer sorted. |
| * symtab.c (lookup_block_symbol): Update comment accordingly. |
| |
| Tue Jun 29 11:02:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/pa/tm-hppa.h: Remove unused ARGS_GROW_DOC. |
| (REG_STRUCT_HAS_ADDR): Add comment. |
| |
| * infrun.c (wait_for_inferior): Use find_pc_line not find_pc_symtab |
| to check whether there is line number information. |
| |
| Tue Jun 29 08:29:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * remote-udi.c: Fix docstring so that it compiles. |
| |
| * remote-mips.c, remote-nindy.c: move bfd.h before symfile.h |
| (for file_ptr). |
| |
| Tue Jun 29 09:11:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * dbxread.c (process_one_symbol): If we find a LOC_BLOCK where we |
| don't expect it, change it to LOC_STATIC so at least we don't coredump. |
| |
| * c-typeprint.c (c_type_print_base): Don't error() on invalid type. |
| |
| * symtab.h: Add comments about line numbers. |
| * source.c (identify_source_line): Fix off by one bug with line. |
| |
| Mon Jun 28 19:00:21 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c: Do not include libhppax. Instead include libhppa.h |
| and hpux-symtab.h. Misc indention fixes. |
| (find_unwind_entry): Add PARAM prototype. |
| (read_hpux_symtab): More fixes for names and sizes of structs, |
| unions, enums, typedefs, and tagdefs. |
| (read_hp_enum_type, read_hp_struct_type): Likewise. |
| (read_hp_set_type, read_hp_subrange_type): Likewise. |
| (hp_type_lookup, process_one_debug_symbol): Likewise. |
| (process_one_debug_symbol): Search forward from the K_FUNCTION for |
| the first K_BEGIN when setting the line number associated with a |
| function. Avoid unnecessary calls to savestring. |
| (hp_alloc_type): Initialize TYPE_CPLUS_SPECIFIC here. Remove |
| most cases where we set it elsewhere. |
| (hppa_sym_fns): Use "hppa" instead of hppax since hpread.c and |
| paread.c use the same BFD backend now. All references changed. |
| (hpux_symfile_init): Allocate space to hold the debugging section |
| contents on the symbol obstack. |
| |
| Mon Jun 28 10:09:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * printcmd.c (makeva*): New interface, for making a va_list. |
| (printf_command): Use it. |
| * config/m88k/xm-delta88.h: Remove VPRINTF define, not needed. |
| * config/pa/xm-pa.h: New file. |
| * config/pa/xm-hppa{b,h}.h: Include it. |
| |
| * xcoffread.c: Remove obsolete NO_TYPEDEFS comment. |
| |
| Sun Jun 27 08:54:55 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * valprint.c (val_print_type_code_int): Fix off by one error with |
| eliminating leading zeroes for large little endian integers. |
| |
| Sun Jun 27 08:58:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/mips/riscos.mh (CC): Use -systype sysv. |
| |
| * ser-unix.c: Move #include of <sys/time.h> to HAVE_SGTTY section. |
| |
| * Makefile.in (ALLPARAM): Add config/mips/{x,n}-{news-mips,riscos}.h. |
| |
| Fri Jun 25 11:22:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/m68k/tm-m68k.h: Remove obsolete comment about duplicating |
| CALL_DUMMY between different 68k machines. |
| |
| Fri Jun 25 17:02:45 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * gdbserver/Makefile.in: Add dependancies on server.h. |
| * gdbserver/remote-gutils.c: Remove lots of unused functions and |
| variables. |
| * gdbserver/remote-inflow.c: Remove lots of unused variables and |
| #includes. Also, use PTRACE_* symbols instead of constants. |
| (mywait): Surround calls to wait() with enable/disable_async_io() |
| so that we can be interrupted from GDB while waiting for the |
| child. Also, handle child exit more gracefully. |
| * gdbserver/remote-server.c: Remove lots of unused variables. |
| Move all extern defs into server.h. Redo main loop so that |
| failure from getpkt() causes communications to be re-established. |
| Fix 'k' command so that it restarts the child. |
| * gdbserver/remote-utils.c: Remove lots of unloved vars and |
| subrs. Move many extern decls into server.h. (remote_open): For |
| tcp, seperate usage of proto fd from connected fd. Close proto |
| fd after getting connection. (putpkt/getpkt): Pay attention to |
| errors when reading/writing. Report these to the caller. New |
| routines input_interrupt/enable_async_io/disable_async_io to make |
| it possible to get an I/O interrupt when data arrives from the |
| comm link. |
| * serial.h: New file to contain common defs for all remote files. |
| |
| Fri Jun 25 17:02:45 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * remote.c: Add arg names to prototypes, in a modest effort at |
| clarification. Also add prototypes for some new functions. |
| * (remote_wait): Better error reporting for 'T' responses. |
| * ser-go32.c (strncasecmp): Make str1 & str2 be const. |
| * (dos_async_init): Make usage message reflect requested port #. |
| * ser-tcp.c (tcp_open): Terminate hostname properly to prevent |
| random hostname lookup failures. Add nicer message for unknown |
| host error. (wait_for): Wake up in case of exceptions. Also, |
| restart select() if we got EINTR. |
| * ser-unix.c (wait_for): Restart select() if we got EINTR. |
| * serial.c: (serial_close): Clean up code. |
| |
| Fri Jun 25 11:22:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/m68k/tm-m68k.h: Remove obsolete comment about duplicating |
| CALL_DUMMY between different 68k machines. |
| |
| Fri Jun 25 11:22:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in (*.tab.c): Use ./c-exp.tab.c not just c-exp.tab.c. |
| Make comment explaining this comprehensible. |
| (TAGFILES): Include ALLDEPFILES. |
| (ALLDEPFILES): udi2soc.c and udr.c are in 29k-share/udi, not |
| 29k-share/udi/udi. |
| (update-alldeps): Remove; obsolete. |
| |
| * remote.c: Move comments regarding packets to top of file with the |
| rest of the protocol comments. |
| Fix incorrect description of 'T' response. |
| |
| * README (Reporting Bugs): Refer people to the GDB manual. |
| |
| * c-valprint.c (c_val_print): Handle TYPE_CODE_BOOLEAN. |
| * stabsread.c: Type -16 is 4 bytes. |
| |
| * remote-udi.c: Improve docstring. |
| |
| Fri Jun 25 11:16:31 1993 Fred Fish (fnf@cygnus.com) |
| |
| * elfread.c (elf_symfile_read): Call bfd_elf_find_section, not |
| bfd_elf32_find_section, to track bfd changes. |
| |
| Fri Jun 25 11:22:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/mips/riscos.mh (REGEX{,1}, MUNCH_DEFINE, MH_CFLAGS): Define. |
| * config/mips/xm-riscos.h: Define USG. |
| |
| Thu Jun 24 14:52:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * main.c (filename_completer): Don't complete to files ending in ~. |
| |
| * NEWS: Mention filename completion and "info line" enhancements. |
| |
| * main.c (symbol_completion_function): On "info t foo", return NULL, |
| don't error(). |
| |
| * main.c (symbol_completion_function): Don't use readline word |
| breaking. Use new calling convention for c->completer and |
| complete_on_cmdlist. |
| * command.h (struct command): Change arguments; now the text passed |
| to completer does not have any word breaking done. New arg word. |
| * symtab.{c,h} (make_symbol_completion_list): Do word breaking. Take |
| word argument. |
| * {main.c,gdbcmd.h} ({filename,noop}_completer): Take word argument. |
| * command.{c,h} (complete_on_cmdlist): Take word argument. |
| |
| * command.c (lookup_cmd_1): Doc fix. |
| |
| Thu Jun 24 13:26:04 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * Makefile.in (OP_INCLUDE): define. |
| (OPCODE_CFLAGS): use OP_INCLUDE. |
| |
| * config/i386/ncr3000.mh, config/i386/i386v4.mh, |
| config/i386/i386sol2.mh, config/m68k/hp300hpux.mh, |
| config/m68k/amix.mh, config/mips/irix[34].mh, |
| config/m88k/delta88.mh, config/sparc/sun4sol2.mh (ALLOCA, |
| ALLOCA1): macros removed. |
| |
| * config/mips/decstation.mh, config/rs6000/rs6000.mh |
| (MMALLOC_LIB): renamed to MMALLOC. |
| |
| Wed Jun 23 00:25:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * partial-stab.h: Consolidate case statements for N_LSYM and N_FUN. |
| * dbxread.c: Change comment regarding acc. |
| |
| Wed Jun 23 16:33:36 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c: Document a few functions, misc cleanups. Update |
| copyright to reflect the first "release" of this file. |
| (struct hpux_symfile_info): Delete unneeded fields. Keep pointers |
| to the contents of the debug sections rather than offsets within |
| the file itself. Corresponding changes to the accessor macros. |
| (sl_symbol_size, slt_symbuf): Delete unneeded global variables. |
| (slt_symbuf_start, slt_symbuf_end, lntt_symbuf): Likewise. |
| (lntt_symbuf_start, lntt_symbuf_end, gntt_symbuf): Likewise. |
| (gntt_symbuf_start, gntt_symbuf_end): Likewise. |
| (fill_slt_symbuf, fill_lntt_symbuf): Delete unneeded functions. |
| (fill_gntt_symbuf): Likewise. |
| (get_lntt, get_gntt, get_slt): Simplify. |
| (hpux_symfile_init): Read and store the contents of the debugging |
| sections. Do error checking on memory allocation and BFD calls. |
| (read_hpux_symtab): Delete KERNELDEBUG crud. Ignore debug symbols |
| which are not needed for building partial symbol tables. Handle |
| K_CONST, K_TYPEDEF, and K_TAGDEF just like K_SVAR and K_DVAR. |
| (read_ofile_symtab): Delete useless processing_gcc_compilation stuff. |
| (read_hp_struct_type): Initialize TYPE_CPLUS_SPECIFIC. |
| (read_hp_set_type, read_hp_array_type): Likewise. |
| (read_hp_subrange_type, hp_type_lookup): Likewise. |
| |
| Wed Jun 23 15:04:54 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| Makefile overhaul dropping autodepend features. |
| * Makefile.in: many comment changes. forced consistent use of $() |
| for makefile variables references. dropped leading ./ in file |
| references. Drop $(srcdir)/ prefix on all dependencies. |
| Inserted contents of alldeps.mak and depend. |
| (INCLUDE_CFLAGS): defined as new macro for getting libiberty's |
| include directory into the compilation line. |
| (GDB_CFLAGS): new macro to take up the semantic previously held |
| by INCLUDE_CFLAGS. |
| (LIBIBERTY): dropped ancient subdir macro. I last removed this |
| macro in feb of '92. How does it keep coming back? |
| (MMALLOC_LIB): renamed to MMALLOC. |
| (BFD_SRC_DIR): renamed to BFD_SRC. |
| (BFD_OBJ_DIR): renamed to BFD_DIR. |
| (BFD_LIB): renamed to BFD. |
| (BFD_INCLUDES): renamed to BFD_CFLAGS. |
| (READLINE_DIR): now represents object directory. |
| (RL_LIB): renamed to READLINE. |
| (READLINE_SRC, READLINE_CFLAGS, OPCODES, OPCODES_CFLAGS): new |
| macros. |
| (INTERNAL_CFLAGS): added GDB_CFLAGS, OPCODES_CFLAGS, |
| READLINE_CFLAGS, BFD_CFLAGS. Dropped USER_CFLAGS. |
| (LDFLAGS): removed default assignment. |
| (TEXIDIR, INCLUDE_DEP, MMALLOC_DIR, MMALLOC_DEP, BFD_DEP, |
| READLINE_DEP, LIBIBERTY_DIR, TESTS, depend, STAGESTUFF): unused, so removed. |
| (ALLOCA1, ALLOCA): removed all references. alloca is now in |
| libiberty. |
| (VERSION): unilaterally and arbitrarily bumped to 4.9.3. |
| (SFILES, NONSRC, HFILES, ALLDEPFILES, ALLPARAM, ALLCONFIG): |
| removed all $(srcdir) prefixes. |
| (getopt_h, ieee-float_h, bfd_h, wait_h, dis-asm_h): new macros |
| for potential dependencies. commented out by default. |
| (readline_headers, udiheaders): convenient abbreviations. |
| (gdbcore_h, frame_h, symtab_h, gdbtypes_h, expression_h, |
| value_h, breakpoint_h, command_h, gdbcmd_h, defs_h, inferior_h): |
| new macros used for header file dependencies. |
| (install-info, clean-info): collapse into the info rule. |
| (install): now depends on all. |
| (install-only): new target for installing without depending on |
| all. |
| (uninstall): new target. |
| (config-check, config-check-hosts, config-check-targets): added |
| fixme comments. |
| (ch-exp.tab.c, m2-exp.tab.c): added artificial dependencies in |
| order to force parallel makes into keeping these rules separate. |
| * configure.in: omit cat'ing depend file onto generated Makefile. |
| * alldeps.mak, depend: removed. |
| |
| * inferior.h: remove redundant include of symtab.h which is |
| included in value.h via breakpoint.h. |
| |
| * alloca.c: removed. alloca is now in libiberty. |
| |
| * config/m88k/delta88.mh, config/ns32k/merlin.mh (M_UNINSTALL): |
| new macro to undo what M_INSTALL does. |
| |
| Wed Jun 23 00:25:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/ns32k/{merlin.mh,xm-merlin.h}: Be consistent about name |
| of gdb-sh. |
| |
| * dbxread.c (copy_pending): Change name and function of begi argument |
| to endi, since that is what the caller needs. |
| |
| * Makefile.in (TAGFILES): Don't include YYFILES. |
| |
| * Makefile.in (HFILES): Include monitor.h. |
| |
| * Makefile.in: Include text that used to be in alldeps.mak. |
| Remove config/mips/{bigmips.mh,xm-bigmips} from it. |
| * Makefile.in, configure.in: Remove all traces of alldeps.mak. |
| |
| * main.c (main): Print help message on stdout not stderr |
| per standards.texi. |
| New option --version per standards.texi. |
| In help message, show long options with "--" not "-". |
| Don't try to print help message or version until after we have |
| called initialize_all_files. |
| |
| Tue Jun 22 11:03:13 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c: Delete useless #if 1 statements. |
| (hp_type_translate): Use T_LONG, T_UNS_LONG, and T_DOUBLE instead |
| of magic integers. Fix handling for T_UNS_INT. Abort if the type |
| passed in is not an "immediate" type. |
| (read_hp_enum_type): Properly compute the size of the type. |
| (read_hp_array_type): Likewise. |
| (hp_type_lookup): Prefix the names of structs, unions and enums |
| with "struct", "union", and "enum" as appropriate. |
| |
| Tue Jun 22 03:15:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * solib.c (solib_add_common_symbols): Don't call lookup_minimal_symbol. |
| (solib_add): Call special_symbol_handling once, not once per library. |
| |
| * procfs.c (procfs_resume): Don't pass a SIGTSTP whose action |
| is SIG_DFL. |
| |
| * procfs.c (procfs_resume): Skip the unnecessary PRSVADDR on all |
| systems, not just Solaris. |
| |
| * stabsread.c: Include <ctype.h>. |
| |
| Mon Jun 21 16:09:46 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * fork-child.c (fork_inferior): Quote exec_file so it can contain |
| funky characters. |
| |
| Mon Jun 21 16:56:47 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (INCLUDE_CFLAGS): Add BFD_INCLUDES for now, since |
| bfd.h is included by target.h, which most of gdb includes. |
| * depend: Hand remove BFD_INCLUDES from ${CC} lines, now that |
| it's in INCLUDE_CFLAGS. |
| |
| Mon Jun 21 16:09:46 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * config/i386/*aix*, i386aix-nat.c: New files. |
| * configure.in: Use them. |
| * alldeps.mak: List them. |
| * coffread.c (decode_base_type): Deal with anonymous enum type. |
| * i387-tdep.c (print_387_status_word): Add comment re "top". |
| * i386-tdep.c [I386_AIX_TARGET] (i386_extract_return_value): New func. |
| * dbxread.c: Use SEEK_SET and SEEK_CUR, not L_*. Define them if and |
| only if not defined by a header file. |
| * mipsread.c: Don't define L_SET or L_INCR. |
| |
| Mon Jun 21 15:10:07 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (BFD_INCLUDES): Bfd.h is now back in bfd build dir. |
| * depend: Hand updated to match. |
| |
| Mon Jun 21 10:13:42 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c: Include "demangle.h". |
| (process_one_debug_symbol): Set the SYMBOL_LANGUAGE and |
| SYMBOL_INIT_DEMANGLED_NAME for the current symbol. Adjust |
| SYMBOL_VALUE for local variables in the stack by the size of the |
| current function's stack (found in unwind descriptor). Keep |
| better track of the current unwind descriptor. |
| |
| Sun Jun 20 13:11:11 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * stabsread.c (read_struct_fields): Don't call read_cpp_abbrev on $_. |
| (read_cpp_abbrev): Don't complain specially for $_. Also return 0 if |
| we don't recognize the abbrev. |
| |
| Sun Jun 20 00:24:41 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * solib.c (solib_add_common_symbols): Add comment about performance. |
| |
| Fri Jun 18 12:37:36 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/mips/{{x,n}m-riscos.h,riscos.mh}: New files. |
| * configure.in (mips-*-sysv*): Use riscos for host, bigmips for target. |
| |
| * config/mips/{{x,n}m-news-mips.h,news-mips.mh}: New files. |
| * config/mips/{bigmips.mh,xm-bigmips.h}: Remove. |
| * configure.in (mips-sony-*): Use news-mips for host. |
| |
| * buildsym.h: Doc fix for processing_acc_compilation. |
| |
| Thu Jun 17 19:57:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * printcmd.c (print_formatted): Don't use tab in wrap_here arg. |
| |
| Thu Jun 17 17:29:30 1993 Jim Kingdon (kingdon@lisa.cygnus.com) |
| |
| * Makefile.in (INTERNAL_CFLAGS): Include ../include as well as |
| ${srcdir}/../include. |
| |
| * config/m88k/xm-delta88.h: Comment out unused defines which conflict |
| with system headers. |
| * printcmd.c (printf_command): Cast second arg to vprintf to PTR. |
| Use VPRINTF macro if defined. |
| * config/m88k/xm-delta88.h: Define VPRINTF. Include <sys/siginfo.h>. |
| Define TIOC{GETC,GLTC}_BROKEN. |
| * m88k-nat.c: Uncomment include of <sys/ptrace.h>. |
| * main.c: Rename initialize_{main,cmd_lists,history} to init_* to |
| make things easier on munch (apparently this matters on |
| the delta88 with svr3). |
| |
| Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com) |
| |
| * Makefile.in: canonicalize install.sh; for use within |
| this directory (and subdirs) |
| |
| Tue Jun 15 17:01:23 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * Makefile.in: remove parentdir support; use INSTALL_XFORM |
| |
| Thu Jun 17 15:08:35 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) |
| |
| * configure.in (alpha-*-osf*), config/alpha/alpha-osf.mh: New |
| host. |
| * sh-tdep.c (frame_find_saved_regs): Use NUM_REGS rather than hard |
| wired (and wrong) constant. |
| * values.c (unpack_long): Add case to unpack when target object is |
| sizeof(int). |
| * config/sh/tm-sh.h (REGISTER_NAMES): Know about the news ones the |
| simulator defines. |
| |
| Wed Jun 16 16:08:18 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * NEWS: tracking user visible changes starting with |
| vxworks-timeout. |
| |
| * remote-vx.c (_initialize_vx): rename user settable option from |
| rpcTimeout to vxworks-timeout. |
| |
| Wed Jun 16 14:34:10 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c (hp_type_translate): Fix promotion bugs from |
| char to short and short to int. |
| |
| Wed Jun 16 12:21:49 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (depend): More makefile diddling. |
| * alldeps.mak, depend: Update to latest automatically built |
| versions. |
| |
| * Makefile.in (depend): Bfd.h keeps moving, keep up with it. |
| * alldeps.mak, depend: Update to latest automatically built |
| versions. |
| |
| Tue Jun 15 12:26:05 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * remote-vx.c: include gdbcmd.h for setlist. |
| (_initialize_vx): make rpcTimeout user settable. |
| |
| Mon Jun 14 09:23:51 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * main.c, gdbcmd.h: Add function filename_completer. |
| * main.c, symfile.c, source.c, exec.c, core.c: Use it for |
| "directory", "source", "cd", "symbol-file" "add-symbol-file", |
| "load", "file", "exec-file", "core-file" commands. |
| (But '/' is a word break, limiting usefulness; see comments). |
| |
| * source.c (mod_path): Warning not error if can't find directory. |
| |
| * isi-xdep.c: New file. |
| * config/m68k/isi.mh (XDEPFILES): Add isi-xdep.o |
| |
| Sun Jun 13 09:17:48 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * config/m68k/xm-news.h: Include <sys/param.h>. |
| |
| * m88k-tdep.c (IEEE_isNAN): Remove. |
| config/m88k/tm-m88k.h (INVALID_FLOAT): Return 0. This was the same |
| broken isNAN as on the mips. |
| |
| * valprint.c (_initialize_valprint): Use c->function.sfunc not just |
| c->function. |
| |
| * dbxread.c (process_one_symbol): If SUN_FIXED_LBRAC_BUG is not |
| defined, don't worry about Sun's silly LBRAC bug. |
| * config/m68k/tm-sun3.h: Define SUN_FIXED_LBRAC_BUG to 0. |
| |
| * dbxread.c (process_one_symbol): If there's a symbol before an |
| N_SO, don't error(). |
| (case N_BCOMM): complain () not error (). |
| |
| * defs.h, main.c (catch_errors): Add return_mask arg. |
| stack.c (print_frame_info): Pass RETURN_MASK_ERROR. |
| other callers: Pass RETURN_MASK_ALL. |
| (return_to_top_level), callers: Add return_reason arg. |
| * utils.c (quit): |
| Use return_to_top_level (RETURN_QUIT) instead of error (). |
| * main.c (main), tm-nindy960.h (ADDITIONAL_OPTION_HANDLER): |
| Use SET_TOP_LEVEL not setjmp (to_top_level). |
| * remote-nindy.c: Use catch_errors not setjmp (to_top_level). |
| |
| Sat Jun 12 14:40:54 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * solib.c (solib_create_inferior_hook) [SVR4_SHARED_LIBS]: |
| Don't try to get the debug base yet. |
| |
| * dbxread.c (process_one_symbol): Set n_opt_found based on whether |
| a non-gcc N_OPT symbol is found. Make SUN_FIXED_LBRAC_BUG a macro |
| which returns 0 or 1 to say whether to do it. |
| * config/sparc/sun4{sol2,os4}.h |
| (SUN_FIXED_LBRAC_BUG,VARIABLES_INSIDE_BLOCK): Use n_opt_found so |
| the right thing happens for both acc and SunOS4 /bin/cc. |
| |
| * valprint.c (print_hex_chars): Use local_hex_format_{pre,suf}fix. |
| * printcmd.c (print_scalar_formatted): Use val_print_type_code_int. |
| |
| * mips-tdep.c: Remove isa_NAN; it assumed sizeof(host int) == 4 and |
| probably contained byte-order sins too. |
| config/mips/tm-mips.h (INVALID_FLOAT): Define to 0 like most machines. |
| The IEEE_FLOAT code in print_floating takes care of it. |
| |
| Sat Jun 12 14:47:04 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (VERSION): Bump to 4.9.2. |
| * c-valprint.c (c_val_print): For array of chars printed with |
| string syntax, don't print the address of the array. From |
| bothner@cygnus.com. |
| * c-exp.y (yylex): Recognize '.' as indicating a floating point |
| number regardless of the radix. From wilson@cygnus.com. |
| * valprint.c (set_input_radix_1, set_output_radix_1): New |
| prototypes and functions that do the actual radix setting work. |
| * valprint.c (set_radix, set_output_radix, set_input_radix): |
| Rewrite to use set_input_radix_1 and set_output_radix_1. |
| * valprint.c (initialize_valprint): Enable commands to |
| independently set and show input and output radices. |
| * valprint.c (show_radix): New prototype and function that |
| handles separate input and output radices. |
| |
| Fri Jun 11 18:39:38 1993 Ken Raeburn (raeburn@cygnus.com) |
| |
| Patches from Jeff Law, law@cs.utah.edu: |
| * hppa-pinsn.c: Now uses disassembler from opcode library, |
| this contains only the stub function print_insn. |
| |
| Fri Jun 11 15:19:59 1993 K. Richard Pixley (rich@cygnus.com) |
| |
| * main.c (main): back to two periods for elipse. |
| (print_gdb_version): revised format for configuration info. |
| |
| Fri Jun 11 10:24:35 1993 Fred Fish (fnf@cygnus.com) |
| |
| * defs.h (INT_MAX): Cast unsigned shift result to int. |
| |
| Fri Jun 11 10:17:41 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * dbxread.c (process_one_symbol): Rather than having |
| BLOCK_ADDRESS_FUNCTION_RELATIVE a macro, make it a variable which |
| is true if we are doing stabs-in-elf, false otherwise. |
| config/sparc/tm-sun4sol2.h: Don't define it. |
| |
| Fri Jun 11 13:33:40 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * remote-mips.c (mips_send_packet): Don't print garbage character |
| in debugging info. |
| (mips_request): Don't check that remote pid is 0, because |
| sometimes it isn't. |
| (mips_fetch_registers): Pass a pointer to SWAP_TARGET_AND_HOST, |
| not an integer. |
| |
| Fri Jun 11 10:17:41 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * stack.c (print_frame_info): Use catch_errors around print_frame_args. |
| |
| * Makefile.in (install): Don't depend on gdb. |
| |
| * Rename remote-es1800.c to remote-es.c |
| and remote-st2000.c to remote-st.c for 14-char filenames. |
| config/m68k/{es1800,st2000}: Use the new names. |
| |
| * mips-tdep.c (isa_NAN): Don't return true on -0. |
| |
| Fri Jun 11 10:24:35 1993 Fred Fish (fnf@cygnus.com) |
| |
| * defs.h (INT_MAX): Cast unsigned shift result to int. |
| |
| Thu Jun 10 13:26:41 1993 Fred Fish (fnf@cygnus.com) |
| |
| * elfread.c (elf_symtab_read): Add bfd section address to bfd |
| symbols, now that they are section relative. |
| * solib.c (bfd_lookup_symbol): Ditto. |
| |
| Thu Jun 10 11:27:34 1993 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hpread.c (read_hp_function_type): Adjust SYMBOL_VALUE for |
| arguments in the stack by the size of the current function's stack |
| (found in the unwind descriptor). |
| (process_one_debug_symbol): Likewise. Keep track of the current |
| function's unwind descriptor. |
| |
| Thu Jun 10 10:56:56 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * Makefile.in (depend): Add bfd -I's for paread.c and xcoffexec.c |
| depend: Updated accordingly. |
| |
| Wed Jun 9 16:08:44 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * Makefile.in (*.tab.c): Use mv for atomic update. |
| |
| * Makefile.in ({dist,real}clean): Also remove nm.h. |
| (realclean): Also remove ${TESTS}, y.output, yacc.{acts,tmp}. |
| (distclean): Don't rebuild *.tab.c or TAGS. |
| |
| Wed Jun 9 12:56:58 1993 K. Richard Pixley (rich@cygnus.com) |
| |
| * Makefile.in (version.c): add host and target names to version.c. |
| * main.c (main): print three periods for the elipse. |
| (print_gdb_version): also print configuration. |
| |
| * udi/udiids.h, udi/udip2soc.c, udi/udiphcfg.h, udi/udiphunix.h, |
| udi/udiproc.h, udi/udipt29k.h, udi/udiptcfg.h, udi/udisoc.h, |
| udi/udr.c: Change AMD copyrights to FSF copyleft '93. |
| |
| * remote-eb.c (get_hex_regs, eb_fetch_registers), remote-adapt.c |
| (get_hex_regs, adapt_fetch_registers): cast args to |
| supply_register to avoid gcc warning. |
| |
| * config/a29k/a29k.mt (TDEPFILES): drop minimon support. It |
| doesn't compile on solaris and is now obsolete. |
| |
| * config/sparc/sun4os4.mh (XM_CLIBS): remove -lresolv. This |
| breaks stock sunos installations. |
| |
| Wed Jun 9 06:14:33 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * m68k-stub.c: Add comment about frame cache. |
| |
| * target.h (target_store_registers): Doc fix re error handling. |
| |
| * findvar.c (write_register): Call SWAP_TARGET_AND_HOST regardless |
| of register_valid[regno]. |
| |
| Tue Jun 8 14:42:10 1993 Jim Kingdon (kingdon@rtl.cygnus.com) |
| |
| * symtab.h, dwarfread.c: Doc fix re dependencies. |
| |
| Tue Jun 8 17:54:09 1993 Rob Savoye (rob@rtl.cygnus.com) |
| |
| * serial.c (serial_close): If scb is NULL, don't try to close |
| it. |
| * configure.in: Add support for rom68k and bug boot monitors. |
| |
| Tue Jun 8 17:39:12 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) |
| |
| * coffread.c (init_stringtab): Fix bug where sizeof(long) != 4. |
| * gdbcore.h, core.c (read_memory_unsigned_integer): New function. |
| * findvar.c (read_register, write_register): Fix thinko where |
| sizeof(host long) != sizeof(target int). |
| * h8300-tdep.c: Use new read_memory_unsigned_integer call. |
| * sh-tdep.c (_initialize_sh_tdep): Add memory_size command. |
| |
| Tue Jun 8 14:42:10 1993 Jim Kingdon (kingdon@rtl.cygnus.com) |
| |
| * Move config/m68k/tm-m68k.h (FRAME_FIND_SAVED_REGS) to |
| m68k-tdep.c (m68k_find_saved_regs). Don't duplicate code between |
| 68881 and non-68881 cases. Check for a pair of movel instructions. |
| |
| Tue Jun 8 14:52:55 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| First cut at sparc-vxworks targetting. |
| * config/sparc/tm-vxsparc.h, config/sparc/vxsparc.mt: new files. |
| * configure.in: sparc-vxworks gdb_target now vxsparc. |
| |
| * remote-eb.c, remote.c: symfile.h requires bfd.h so include it. |
| |
| Tue Jun 8 14:42:10 1993 Jim Kingdon (kingdon@rtl.cygnus.com) |
| |
| * config/m68k/xm-news.h: add "extern int errno". |
| |
| Tue Jun 8 13:45:07 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * remove-vx.c (vx_read_register, vx_write_register): collapse |
| ifdef I80960 else (assumes) m68k into parameterizable macros |
| VX_NUM_REGS and VX_SIZE_FPREGS. |
| * config/m68k/tm-vx68.h, config/i960/tm-vx960.h (VX_NUM_REGS, |
| VX_SIZE_FPREGS): new definitions. |
| |
| Tue Jun 8 11:08:29 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * symfile.{c,h} (generic_load): New function. |
| remote{,-nindy,-eb,-mips}.c: Use it. |
| |
| Mon Jun 7 20:07:30 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * Makefile.in (depend): More sed gubbish to deal with |
| ../bfd/bfd.h being generated during the build. |
| * depend: Re-done with corrected makefile. |
| |
| Mon Jun 7 16:32:05 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (BFD_SRC_DIR): Renamed def and usages from BFD_DIR. |
| * Makefile.in (BFD_OBJ_DIR): New definition for the bfd build |
| directory to find automatically generated header files and library. |
| * Makefile.in (BFD_LIB): Use BFD_OBJ_DIR. |
| * Makefile.in (LINTFLAGS): Include BFD_OBJ_DIR. |
| * Makefile.in (saber_gdb): Include BFD_OBJ_DIR. |
| * Makefile.in (depend): Include BFD_OBJ_DIR in gcc args. |
| * Makefile.in (paread.o, xcoffexec.o): Remove, now in depend. |
| * depend, alldeps.mak: Rebuild after Makefile.in changes. |
| |
| Fri Jun 4 10:18:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * configure.in: change lynx support to CPU-*-lynxos* |
| |
| * Makefile.in (subdir_do): change test from existence of directory |
| to existence of Makefile (the directory may exist but not be configured) |
| |
| Thu Jun 3 01:18:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * config/sparc/xm-sun4sol2.h: define MEM_FNS_DECLARED |
| |
| Fri Jun 4 10:43:33 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * configure.in (mips-idt-ecoffl*): New target; use idtl. |
| (mips-idt-ecoff*): Added trailing '*'. |
| * config/mips/idtl.mt: New file; like idt.mt, but little endian. |
| |
| Thu Jun 3 17:36:56 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * ser-go32.c: Clean up lots of compilation nits. |
| |
| Thu Jun 3 14:44:57 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * Patches from Jeffrey Law <law@cs.utah.edu>. |
| * hppab-nat.c: Eliminate unnecessary ifdefs for |
| FETCH_INFERIOR_REGISTERS, CANNOT_FETCH_REGISTER, and |
| CANNOT_STORE_REGISTER. |
| (fetch_register): Delete code to handle CANNOT_FETCH_REGISTER. |
| * hppa-pinsn.c: Support 'I', 'J', and 'K' in output |
| templates for 1.1 FP computational instructions. |
| |
| Thu Jun 3 03:34:49 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * Makefile.in: Remove ser-tcp.[co]. (Use XDEPFILES instead.) |
| * alldeps.mak, depend: Rebuild to account for ser-tcp. |
| * config/sparc/sun4os4.mh: Add ser-tcp to XDEPFILES. |
| * gdbserver/Makefile.in (gdbserver): Use -lbsd. |
| * gdbserver/remote-inflow{-sparc}.c (create_inferior): Don't use a |
| shell when running the child, as args have been expanded by the |
| time we get here. Simplify calling convention. |
| * gdbserver/remote-server.c (main): Use new calling convention |
| for create_inferior, remove defunct code for coalescing argv. |
| Remove extra calls to mywait(), as we no longer have to wade |
| through a shell. |
| |
| * target.c (target_read_memory_partial): Don't deref errnoptr |
| when checking for null pointer. |
| |
| Wed Jun 2 19:58:46 1993 John Gilmore (gnu@cygnus.com) |
| |
| * remote-es1800.c: Fix typo. |
| |
| Tue Jun 1 21:22:39 1993 Fred Fish (fnf@cygnus.com) |
| |
| * target.c (target_read_memory_partial): Like target_read_memory, |
| but does partial reads, such as reads that bump into the end of |
| the address space. |
| * target.h (target_read_memory_partial): Add prototype. |
| * valprint.c (PRINT_MAX_DEFAULT): New define, initial value 200. |
| * valprint.c (val_print_string): Complete rewrite to fix bug with |
| bumping into end of memory, avoiding unnecessarily long reads, and |
| fixing bug when print_max is set to 0 (unlimited print length). |
| * valprint.c (_initialize_valprint): Use PRINT_MAX_DEFAULT to |
| initialize print_max. |
| |
| Tue Jun 1 18:11:35 1993 Rob Savoye (rob at darkstar.cygnus.com) |
| |
| * configure.in: Add support for rom68k and bug boot monitors. |
| |
| Mon May 31 10:37:04 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * printcmd.c (print_scalar_formatted): Print integers bigger than |
| LONGEST in hex no matter how big, and no matter what the format |
| and size. |
| |
| * stabsread.c (read_type): Skip type attributes if present. |
| |
| * stabsread.c (read_huge_number): Don't accept '0' + radix as part |
| of number, just through '0' + radix - 1. |
| |
| Sun May 30 15:35:21 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (SER_HARDWIRE): Temporarily comment out ser-tcp.o. |
| |
| * {dbxread.c, dwarfread.c} (read_ofile_symtab): Rewrite to take |
| single parameter, the pointer to the partial symtab, rather than |
| a bunch of args that are derived from the partial symtab. Change |
| prototypes and callers to match. |
| |
| * dbxread.c (read_ofile_symtab): Remove "#if 1" around code to |
| set demangling style automatically. |
| * defs.h (CPLUS_MARKER): Clarify comment that this is only for |
| GNU C++, not C++ in general. |
| * symtab.h (general_symbol_info): Simplify by eliminating one |
| structure level for the language dependent info. |
| |
| Sat May 29 15:59:29 1993 Fred Fish (fnf@cygnus.com) |
| |
| * c-typeprint.c (c_type_print_base): Avoid dereferencing NULL |
| names for TYPE_CODE_STRUCT and TYPE_CODE_UNION types. |
| TYPE_CODE_ENUM was already testing for this. |
| |
| Fri May 28 17:18:05 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * Makefile.in: Add new file ser-tcp.c. |
| * defs.h (memcmp): Add decl for memcmp to #ifndef MEM_FNS_DECLARED. |
| * findvar.c (write_register): See if we are writing back the same |
| value that's already in the register. If so, don't bother. |
| * remote.c (putpkt, getpkt): Improve handling of communication |
| problems. |
| * ser-go32.c: Prototype it to death. Update serial_ops and add |
| dummy routines where appropriate. |
| * ser-tcp.c: New module to implement serial I/O via TCP |
| connections. |
| * ser-unix.c: Clean up getting/setting of tty state. Get rid of |
| SERIAL_RESTORE, add SERIAL_{GET|SET}_TTY_STATE interfaces. |
| * serial.c: Add start of support for connect command. |
| (serial_open): Distinguish between tcp and local devices. |
| * serial.h (struct serial_ops): Get rid of restore, add |
| get_tty_state and set_tty_state. Define protoypes and macros for |
| this mess. |
| * gdbserver/remote-utils.c: Add tcp support. (readchar): Do |
| some real buffering. Handle error conditions gracefully. |
| * gdbserver/remote-inflow-sparc.c: Update to remote-inflow.c |
| (Lynx), remove lots of cruft. |
| |
| Fri May 28 17:24:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * printcmd.c (print_address_symbolic): turn this into an assigment |
| instead of an initialization (many compilers don't accept |
| structure initialization). |
| |
| Thu May 27 16:56:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * xcoffread.c (read_xcoff_symtab): If several program csects in one |
| source file, give them all the name of the source file, rather than |
| the 2nd and subsequent ones having NULL names. |
| |
| Thu May 27 06:16:56 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * printcmd.c (print_address_symbolic): Append source filename and |
| linenumber of the symbol if print symbol-filename is on. |
| (initialize_printcmd): `set print symbol-filename'. |
| |
| Wed May 26 13:46:16 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * configure.in: Add config for Lynx target. Configure gdbserver |
| only for Lynx. Re-do selective configuration of sparclite. |
| |
| * gdbserver/{remote-gutils.c remote-server.c Makefile.in |
| configure.in remote-inflow.c remote-utils.c}: New files to |
| support GDB remote server. Currently only works for Lynx. |
| |
| Wed May 26 10:28:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c (define_symbol, case 't'): Only set the name if it |
| is not a pointer type. |
| |
| * stabsread.c (define_symbol): Clean up logic; move the read_type |
| calls to inside the switch statement (this improves the error |
| handling). |
| |
| * mipsread.c (parse_symbol, parse_partial_symbols): Deal with Fortran |
| common blocks. |
| |
| Tue May 25 20:44:24 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * printcmd.c (print_formatted, case 'i'): Pass a tab to wrap_here. |
| |
| * source.c (line_info): Change "pc" to "address" in messages and |
| use print_address for addresses. |
| |
| * source.c (line_info): If we don't find a symtab, print more useful |
| output, including the symbolic address. |
| |
| * source.c (line_info): If --fullname, display the source. |
| (identify_source_line), callers: Take pc as argument, rather than |
| assuming innermost frame (emacs doesn't use this, so no one ever |
| noticed). |
| * symtab.h: Declare frame_file_full_name. |
| * main.c: Don't. |
| |
| Tue May 25 15:30:43 1993 Brendan Kehoe (brendan@lisa.cygnus.com) |
| |
| * breakpoint.c (catch_command_1): Fix typo in error msg. |
| |
| Tue May 25 16:05:55 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * elfread.c (elf_symfile_read): Update ELF structure and routine |
| names to specify 32-bit versions. |
| (elf_symtab_read): Retrieve size field directly from symbol, |
| instead of using old kludge. |
| |
| * mips-pinsn.c (print_insn): Cast address to bfd_vma before |
| calling opcodes library. |
| * z8k-tdep.c (print_insn): Likewise. |
| |
| Tue May 25 13:06:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * stabsread.c: Remove all uses of error(). Make error_type and |
| read_type_number static. |
| (define_symbol): Don't try to deal with a missing symbol |
| descriptor which isn't followed by digit, '(', or '-'. |
| * stabsread.h: Don't declare read_type_number here. |
| * gdbtypes.h: Don't declare error_type here. |
| * xcoffread.c: Remove NO_TYPEDEFS code. |
| |
| Tue May 25 09:33:16 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mips-tdep.c: Removed #include of many header files, and #define |
| of MIPSMAGIC; no longer used. |
| |
| Tue May 25 09:36:13 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Many places: replace "the inferior" in messages with "the program" |
| or "the program being debugged". |
| * inflow.c (try_writing_regs): Remove; it's been #if 0'd forever |
| and I'm getting sick of maintaining it. |
| |
| * config/i386/linux.mh: Don't use \ newline; the awk scripts don't |
| support it. |
| |
| * config/i386/go32.mh: Define SER_HARDWIRE. |
| * Makefile.in: Define SER_HARDWIRE. |
| (DEPFILES): Use it. |
| (alldeps.mak): Add SER_HARDWIRE. |
| Remove all references to ser-hardwire.{c,o}. |
| * configure.in: Remove all ser_hardwire and gdb_serial_driver stuff. |
| |
| Mon May 24 23:50:05 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * sparc-nat.c (store_inferior_registers): Fill in all members of |
| inferior_fp_registers by reading them from the inferior before |
| modifying and writing them back. |
| Fixes unexplainable inferior FP exceptions after calls to the inferior |
| or setting of floating point registers. |
| * mips-tdep.c (mips_skip_prologue): Skip move of argument register |
| to register which is generated by gcc-2.4. |
| |
| Tue May 25 00:42:39 1993 Ken Raeburn (raeburn@cygnus.com) |
| |
| * hppa-pinsn.c: Define OLD_TABLE before including opcode/hppa.h. |
| |
| Mon May 24 13:55:14 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * config/i386/{i386lynx.mh i386lynx.mt nm-i386lynx.h tm-i386lynx.h |
| xm-i386lynx.h}: New configuration for Lynx. |
| |
| Mon May 24 10:01:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * mipsread.c (parse_symbol): Deal with scVar and scVarRegister. |
| * symtab.h: Comment that LOC_REGPARM_ADDR can be call by reference. |
| |
| * c-typeprint.c (c_type_print_base): Don't print typedef'd names |
| as struct, union, or enum tags. |
| |
| Mon May 24 01:10:01 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * symmisc.c (dump_msymbols): Avoid gdb coredump with stripped |
| executable. |
| |
| Sat May 22 10:03:09 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * infrun.c (wait_for_inferior), |
| infcmd.c (program_info, signal_command): Use symbolic signal names. |
| |
| * inftarg.c (child_wait): Deal with EINTR and include message from |
| strerror if printing an error message. |
| |
| * main.c (command_line_input): Use STOP_SIGNAL not SIGTSTP. |
| |
| * stabsread.c: Remove most uses of lookup_fundamental_type. |
| (define_symbol): Use read_type for type of enum constant, |
| not just read_type_number. Also don't call error(). |
| (define_symbol): For unrecognized constant type, one complaint (the |
| one from error_type) is enough. Don't make our own in addition. |
| (define_symbol): Don't treat an N_FUN 'R' as a prototype. |
| * gdbtypes.h: Doc fixes. |
| |
| Sat May 22 03:33:07 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| Fix stack unwinding through _sigtramp on Irix. These patches are from |
| Paul Flinders <ptf@delcam.co.uk>. |
| * mipsread.c (fixup_sigtramp): Find _sigtramp on Irix even when the |
| executable uses sigvec. |
| * mips-tdep.c (read_next_frame_reg): Allow tm-file to override |
| sigcontext offsets. |
| * config/mips/tm-irix3.h: Add sigcontext offsets for Irix. |
| |
| Sat May 22 00:39:01 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * infrun.c (wait_for_inferior): Clear stop_signal if it should not |
| be passed to the inferior to make "handle <signal> nopass nostop" work. |
| |
| Sat May 22 00:21:41 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * config/mips/tm-irix3.h: Clean up, use tm-bigmips.h and redefine |
| the necessary bits. |
| * findvar.c (value_from_register): Fix uninitialized first_addr |
| which caused problems with assignment of doubles to register variables |
| on some targets. |
| * mipsread.c: Remove TM_FILE_OVERRIDE, include tm.h and provide the |
| missing mips definitions if necessary. |
| |
| Fix handling of double register variables for mips targets and big |
| endian hosts. These patches are from Paul Flinders <ptf@delcam.co.uk>. |
| * config/mips/tm-mips.h: Increase MAX_REGISTER_{RAW,VIRTUAL}_SIZE to |
| 8 bytes for doubles. |
| * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE): New macro for |
| conversion of type held in multiple registers to host format. |
| * config/mips/tm-mips.h (REGISTER_CONVERT_FROM_TYPE): New macro, |
| companion to REGISTER_CONVERT_TO_TYPE. |
| * config/mips/tm-mips.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): |
| Convert to function calls. |
| * config/mips/tm-mips.h (FIX_CALL_DUMMY): New code for big endian |
| mips targets. |
| * mips-tdep.c (mips_print_register): Raw buffer now needs just |
| MAX_REGISTER_RAW_SIZE bytes. |
| * mips-tdep.c (mips_print_register): Use REGISTER_CONVERT_TO_TYPE |
| (if defined) for doubles. |
| * mips-tdep.c: (mips_extract_return_value, mips_store_return_value): |
| New functions, take care of REGISTER_CONVERT_TO/FROM_TYPE. |
| * valops.c (value_assign): Use REGISTER_CONVERT_TO_TYPE if |
| defined. |
| * findvar.c (value_from_register): Use REGISTER_CONVERT_TO_TYPE if |
| defined. |
| |
| Fri May 21 09:04:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * configure.in: Add i[34]86-*-isc*. |
| |
| * stabsread.c: Make sure all complain() pass the address of the struct. |
| |
| * xcoffread.c: Make sure all struct complaints are static not auto. |
| |
| * Makefile.in: Add rule for xcoffexec.o like that for paread.o. |
| |
| * xcoffread.c (process_xcoff_symbol, case C_LSYM): Use define_symbol. |
| |
| Wed May 19 12:33:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * config/i386/linux.mh: Re-enable coredumps now that they should work. |
| |
| Wed May 19 15:44:20 1993 K. Richard Pixley (rich@cygnus.com) |
| |
| * config/m68k/tm-m68k.h (FRAME_CHAIN): add missing close paren. |
| |
| Wed May 19 15:33:57 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * config/pa/nm-hppab.h: Comment PTRACE_ARG3_TYPE. |
| |
| Wed May 19 12:33:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in (INSTALLED_LIBS): New variable. |
| |
| Tue May 18 14:08:50 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * main.c (quit_command): In the "quit anyway?" message, tell the user |
| whether we are planning to detach or kill the program. |
| |
| * config/vax/vaxbsd.mh: Add "NAT_FILE= nm-vax.h". |
| * config/vax/xm-vaxbsd.h: Use <sys/param.h> not <machine/limits.h> |
| |
| * infcmd.c (read_pc): Doc fix. |
| |
| * printcmd.c (print_address_symbolic): Use %u not %d for offset. |
| |
| * blockframe.c (get_prev_frame_info): If pc in sigtramp, set |
| signal_handler_caller. |
| * tm-68k.h (FRAME_{CHAIN,SAVED_PC}): Deal with sigtramp. |
| * tm-hp300bsd.h: Define SIGTRAMP_{START,END} not IN_SIGTRAMP. |
| * inferior.h (IN_SIGTRAMP): Definition moved from infrun.c. |
| Use SIGTRAMP_START if defined. |
| * infcmd.c (step_1): Use SIGTRAMP_{START,END} if needed. |
| * infrun.c (wait_for_inferior): Check IN_SIGTRAMP before SKIP_PROLOGUE. |
| |
| * infptrace.c: Remove unused KERNEL_U_ADDR_HPUX code. |
| |
| * infcmd.c (step_1): Fix poorly worded error message. |
| |
| * config/{i386/linux.mh,m68k/isi.mh} (NATDEPFILES): |
| Comment out corelow.c because core dumps are broken on these machines. |
| |
| * Makefile.in (depend): Put "${srcdir}" in generated dependencies |
| if srcdir is not ".". |
| Also put in -I${BFD_DIR} or -I${READLINE_DIR} for files which need it. |
| (INCLUDE_CFLAGS): Remove BFD_DIR and READLINE_DIR. |
| * depend: Update to latest automatically built version. |
| |
| Tue May 18 08:10:45 1993 Fred Fish (fnf@cygnus.com) |
| |
| * ChangeLog, ChangeLog-92: Split ChangeLog at 1993. |
| * Makefile.in (NONSRC): Add ChangeLog-92 |
| |
| Tue May 18 08:03:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * findvar.c ({read,write}_register): Use REGISTER_RAW_SIZE |
| not typo RAW_REGISTER_SIZE. |
| |
| * frame.h, inferior.h: Doc fixes. |
| |
| Mon May 17 15:43:03 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * findvar.c (write_register): Add sanity check for register size. |
| (read_register): Fixup sanity check for register size to be |
| consistent with write_register(). |
| |
| Mon May 17 07:36:20 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * sparclite/Makefile.in: Add dummy info, install and install-info |
| targets. |
| |
| Thu May 13 07:30:22 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * remote-nindy.c: Removed declaration of coffstrip. |
| * nindy-share/nindy.c: #if 0 coffstrip routine; no longer used. |
| |
| Wed May 12 00:35:19 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (VERSION): Bump to 4.9.1 after release and cvs |
| tagging. |
| |
| * Makefile.in (VERSION): GDB 4.9 release. |
| |
| Tue May 11 08:04:41 1993 Fred Fish (fnf@cygnus.com) |
| |
| * README: Update known bugs to include the Solaris bug that |
| leaves core dumps in the current directory when restarting the |
| inferior with "run". Expand on the testsuite information. |
| |
| * Makefile.in (VERSION): Bump to 4.8.96 for what should hopefully |
| be the last 4.9 prerelease test archive. |
| |
| Mon May 10 22:13:23 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * config/m68k/xm-hp300bsd.h: Include <sys/param.h> to avoid INT_MAX |
| redefined warnings. |
| |
| Mon May 10 20:00:43 1993 Fred Fish (fnf@cygnus.com) |
| |
| * README, NEWS: Update for gdb 4.9 release. |
| |
| Mon May 10 19:38:34 1993 John Gilmore (gnu@cygnus.com) |
| |
| * ch-exp.y (MAX, MIN): Rename to MAX_TOKEN, MIN_TOKEN. |
| * target.c (MIN): #undef before defining. |
| |
| Mon May 10 16:03:03 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| Patch from Jeffrey Law: |
| * gdb/config/pa/nm-hppab.h (PTRACE_ARG3_TYPE): Define as caddr_t. |
| |
| Mon May 10 15:28:27 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * hppa-tdep.c (hppa_push_arguments): Allocate correct amount of |
| memory. |
| |
| Mon May 10 13:14:46 1993 Fred Fish (fnf@cygnus.com) |
| |
| * ch-exp.y (start): Apply work-around to avoid bison warning. |
| |
| Sun May 9 07:25:02 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (BISON): Remove double quotes around BISON |
| definition when bison is used. |
| |
| * configure.in (hppa*-hp-bsd): Change to hppa*-hp-bsd* |
| * configure.in (hppa*-hp-hpux): Change to hppa*-hp-hpux* |
| * configure.in (m68*-hp-bsd): Change to m68*-hp-bsd* |
| * configure.in (m68*-hp-hpux): Change to m68*-hp-hpux* |
| * configure.in (hppa*-*-bsd): Change to hppa*-*-bsd* |
| * configure.in (hppa*-*-hpux): Change to hppa*-*-hpux* |
| * configure.in (m68*-hp-bsd): Change to m68*-hp-bsd* |
| * configure.in (m68*-hp-hpux): Change to m68*-hp-hpux* |
| |
| * Makefile.in (VERSION): Bump to 4.8.6. |
| |
| Sat May 8 12:36:03 1993 Fred Fish (fnf@cygnus.com) |
| |
| * config/pa/xm-hppah.h (MALLOC_INCOMPATIBLE): Define it, and |
| include declarations for malloc/realloc/free. Both malloc and |
| realloc return 'void *' for non-ANSI compilations. |
| |
| Sat May 8 01:39:30 1993 (pes@regent.e-technik.tu-muenchen.de) |
| |
| * coffread.c (read_coff_symtab): Don't fclose stream as it is no |
| longer opened twice. |
| |
| Thu May 6 21:08:55 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * solib.c (clear_solib): Don't close bfd if it is NULL. |
| |
| Thu May 6 20:55:35 1993 Fred Fish (fnf@cygnus.com) |
| |
| * core.c (dis_asm_read_memory): Cast second arg of |
| target_read_memory to "char *". |
| * breakpoint.c (watchpoint_check): Change arg type from PTR to |
| "char *", to match other functions called by catch_errors(). |
| |
| Thu May 6 15:47:45 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * More patches from Jeffrey Law (law@cs.utah.edu). |
| * gdb/config/nm-hppab.h (PTRACE_ARG3_TYPE): Define as caddr_t. |
| * gdb/config/pa/tm-hppah.h (millicode_start, millicode_end): |
| Delete unnecessary declarations. |
| |
| Thu May 6 15:15:46 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * ser-unix.c (wait_for): Use VTIME to do timeouts instead of |
| poll() for termio{s}. |
| |
| Thu May 6 10:03:41 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * i386-tdep.c (i386_frame_num_args): Always return -1. |
| |
| Wed May 5 15:16:33 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * Patches from Jeffrey Law <law@cs.utah.edu>. |
| * gdb/hppa-tdep.c: Declare frame_saved_pc. |
| (frameless_function_invocation): New function. |
| (frame_saved_pc, init_extra_frame_info): Use |
| frameless_function_invocation. |
| * gdb/config/pa/tm-hppa.h (SAVED_PC_AFTER_CALL): Use saved_pc_after |
| call instead of just grabbing the value currently in %r2. |
| (FRAMELESS_FUNCTION_INVOCATION): Use frameless_function_invocation. |
| * gdb/config/pa/tm-hppah.h (SAVED_PC_AFTER_CALL): Delete private |
| definition and use the common one in tm-hppa.h. |
| * gdb/hppa-tdep.c (frame_chain_valid): If "use_unwind" is true, then |
| use unwind descriptors to determine if the frame chain is valid. |
| * gdb/hppa-tdep.c (find_dummy_frame_regs): Rework so that |
| it does not assume %r4 is the frame pointer. |
| * gdb/hppa-pinsn.c (print_insn): Handle 'r' and 'R' for break, rsm, |
| and ssm instructions. |
| * gdb/hppa-tdep.c (extract_5r_store, extract_5R_store): New |
| helper functions for print_insn. |
| * gdb/hppa-tdep.c (gcc_p, hpux_cc_p): Delete unused functions. |
| * gdb/config/pa/tm-hppa.h (ABOUT_TO_RETURN): Handle a return |
| which nullifies the following instruction. |
| |
| Tue May 4 12:11:38 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * infptrace.c [FIVE_ARG_PTRACE]: Define ptrace to call_ptrace and |
| pass the 5th arg there, rather than using an ANSI C-specific macro. |
| |
| * Makefile.in (depend): Don't include ${CC} command for *.tab.c. |
| |
| Tue May 4 19:33:12 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (VERSION): Bump to 4.8.5 |
| * Makefile.in (INCLUDE_CFLAGS): Add BFD_DIR and READLINE_DIR |
| directories to include search path. |
| * Makefile.in (CLIBS, CDEPS, ADD_FILES, ADD_DEPS): Clean up |
| whitespace. |
| * Makefile.in (depend): For gcc -MM line, use INTERNAL_CFLAGS |
| * Makefile.in (main.o, dbxread.o, coffread.o, mipsread.o, |
| elfread.o, dwarfread.o, stabsread.o, xcoffread.o, xcoffexec.o, |
| xdr_ld.o, xdr_rdb.o, nindy.o, Onindy.o, ttybreak.o, ttyflush.o, |
| udr.o, udip2soc.o): Remove explicit rules, use the ones that |
| are automatically generated in "depend". |
| * Makefile.in (paread.o): Document why a dependency doesn't get |
| automatically generated in "depend" and leave this explicit rule |
| in for now (FIXME). |
| * depend: Update to latest automatically generated version. |
| |
| Tue May 4 12:11:38 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffread.c: Doc fix. |
| |
| * Makefile.in (depend): Include $(CC) command in generated output. |
| |
| Mon May 3 22:51:05 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (NONSRC): Remove ${srcdir}/putenv.c. |
| * Makefile.in (SFILES): Add ${srcdir}/putenv.c. |
| * depend: Update to latest automatically built version. |
| |
| Mon May 3 19:20:20 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * sparclite/Makefile.in: Create default target that does nothing |
| in order to force user to build by hand. |
| |
| * sparclite/Makefile: Remove. It's not necessary anymore. |
| |
| * ser-unix.c (wait_for): New routine to handle read timeouts, |
| etc. Uses poll() if HAVE_TERMIO[S] is defined, select() otherwise. |
| |
| Mon May 3 13:52:08 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mips-pinsn.c (print_insn): Return value. |
| |
| Sun May 2 11:43:57 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (SFILES): Remove ser-hardwire.c; it is a link made |
| at configuration time and doesn't belong in the distribution archive. |
| |
| * Makefile.in (NONSRC): Add 29k-share/README. |
| * Makefile.in (HFILES): Add 29k-share/udi/udiids.h. |
| |
| * defs.h (UINT_MAX, LONG_MAX, INT_MAX, INT_MIN): Replace hex |
| constants with slightly more portable definitions (still depends |
| on 2's complement arithmetic though). |
| * config/i386/nm-linux.h: Define NO_SYS_REG_H for no <sys/reg.h>. |
| * i386v-nat.c (sys/reg.h): Conditionalize include on |
| NO_SYS_REG_H. Linux doesn't have <sys/reg.h>. |
| * ser-unix.c (termio.h): Include <termio.h> like other files that |
| include termio.h, not <sys/termio.h> which may not exist (on |
| linux for example). |
| |
| Sat May 1 16:05:24 1993 Fred Fish (fnf@cygnus.com) |
| |
| * valprint.c (print_longest): Change format parameter from a |
| 'char' to an 'int'. We can't have 'char' parameters with the |
| current coding style, where we mix prototypes with pre-ANSI |
| style declarations. |
| * value.h (print_longest): Change format parameter in prototype |
| from a 'char' to an 'int'. |
| |
| Sat May 1 02:47:20 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * config/mips/tm-mips.h (STAB_REG_TO_REGNUM): Match it with the gcc |
| definition. |
| * config/mips/tm-irix3.h (STAB_REG_TO_REGNUM): Add. |
| * irix4-nat.c (fill_fpregset): Fix bug with indexing into fpregsetp. |
| |
| Fri Apr 30 17:45:32 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * The following patches are from Jeffrey Law <law@cs.utah.edu>. |
| * config/pa/hppabsd.mh: Add more files to NATDEPFILES. |
| * config/pa/xm-hppa[bh].h: Define FIVE_ARG_PTRACE. |
| * hppab-nat.c: Delete WANT_NATIVE_TARGET ifdefs. |
| ptrace needs 5 arguments, #define ptrace to always |
| pass zero as the 5th argument. |
| |
| Fri Apr 30 15:54:13 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * configure.in: Match z8k-*-sim for z8000. |
| * config/h8500/tm-h8500.h, h8500-tdep.c: Lint. |
| * remote-hms.c: Update to use new serial protocol. |
| |
| Fri Apr 30 16:50:38 1993 K. Richard Pixley (rich@rtl.cygnus.com) |
| |
| * mips-tdep.c: remove include of sys/dir.h. Doesn't seem |
| necessary and Solaris doesn't have it. |
| |
| * Makefile.in (clean-info, install, install-info, info, dvi, |
| check, all): do not echo recursion lines. |
| |
| * 29k-share/udip2soc.c (UDIConnect): replace union wait with int. |
| |
| * config/sparc/sun4sol2.mh (XM_CLIBS): add -lsocket which is |
| required target ports which use sockets (like a29k-udi). |
| |
| * remote-udi.c (udi_wait): Use SIGURG, as Solaris doesn't have SIGLOST. |
| |
| Fri Apr 30 11:05:42 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * ser-unix.c [USE_{TERMIO,ALARM}_TIMEOUT]: New code to deal with |
| systems lacking select(). |
| |
| * Makefile.in (TAGS): Doc fix. Deal with empty DEPFILES. |
| |
| Fri Apr 30 10:06:46 1993 Fred Fish (fnf@cygnus.com) |
| |
| * alldeps.mak, depend: Update with latest automatically built |
| versions. |
| |
| Thu Apr 29 12:03:23 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (SFILES): Add ser-unix.c and ser-go32.c. |
| |
| * Makefile.in (make-proto-testsuite.dir): New target to make |
| prototype testsuite tree. |
| |
| * Makefile.in (VERSION): Bump to 4.8.4. |
| |
| Thu Apr 29 08:46:22 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * stabsread.c (define_symbol): If unrecognized constant type, |
| complain() not error(). |
| |
| Thu Apr 29 00:03:59 1993 Fred Fish (fnf@cygnus.com) |
| |
| * infptrace.c: Add missing close paren to test for |
| FIVE_ARG_PTRACE defined. |
| |
| * defs.h (CC_HAS_LONG_LONG): Set up to define CC_HAS_LONG_LONG |
| when compiling with gcc, but disable it for now. See comment. |
| * defs.h (LONGEST): Define as either "long" or "long long" |
| based on CC_HAS_LONG_LONG. |
| * defs.h (longest_to_int): Use CC_HAS_LONG_LONG to control |
| how longest_to_int is defined. |
| * c-valprint.c (c_val_print): Call print_longest. |
| * expprint.c (dump_expression): Use PRINTF_HAS_LONG_LONG |
| instead of LONG_LONG. |
| * {printcmd.c, gdbtypes.h} (LONG_LONG): Replace usages with |
| CC_HAS_LONG_LONG. |
| * printcmd.c (print_scalar_formatted): Call print_longest |
| and let it figure out what to do for PRINTF_HAS_LONG_LONG. |
| * typeprint.c (print_type_scalar): Call print_longest and let |
| it figure out what to do for PRINTF_HAS_LONG_LONG. |
| * valprint.c (val_print_type_code_int): Call print_longest |
| and let it figure out what to do for PRINTF_HAS_LONG_LONG. |
| * stabsread.c (LONG_LONG): Replace usages with CC_HAS_LONG_LONG. |
| * value.h (struct value): Replace usage of LONG_LONG with |
| CC_HAS_LONG_LONG. |
| * value.h (print_longest): Add prototype. |
| * values.c (LONG_LONG): Replace usages with CC_HAS_LONG_LONG. |
| * values.c (unpack_double): Collapse code that was unnecessarily |
| dependent on CC_HAS_LONG_LONG. Use LONGEST instead of direct types. |
| * values.c (value_from_longest): Remove dependency on |
| CC_HAS_LONG_LONG and just use LONGEST. |
| * solib.c (solib_map_sections): Use bfd_get_filename |
| to access filename field. |
| * solib.c (clear_solib): Save filename and free it later, after |
| bfd_close, since bfd_close may reference it. Use bfd_get_filename |
| to access the field. |
| * config/convex/xm-convex.h (LONG_LONG): Replace with |
| CC_HAS_LONG_LONG. Add define for PRINTF_HAS_LONG_LONG. |
| * doc/gdbint.texinfo (LONG_LONG): Replace with CC_HAS_LONG_LONG. |
| Add PRINTF_HAS_LONG_LONG references. |
| |
| Wed Apr 28 06:11:38 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * inflow.c (kill_command), infcmd.c (attach_command), |
| remote.c (remote_interrupt_twice): In messages for the user, call it |
| "the program" or "the program being debugged" not "the inferior". |
| |
| * hp300ux-nat.c: Cast second arg to supply_register calls. |
| (_initialize_kernel_u_addr, getpagesize): New functions. |
| (store_inferior_register_1): Change arg name from value to val. |
| (fetch_core_registers): Make arg core_reg_size unsigned. |
| Pass 5 args to ptrace. |
| * config/m68k/xm-hp300hpux.h: Define FIVE_ARG_PTRACE. |
| Remove KERNEL_U_ADDR stuff. |
| * infptrace.c [FIVE_ARG_PTRACE]: Pass 5th arg to ptrace. |
| * config/m68k/hp300hpux.m{t,h}: |
| Move exec.o from NATDEPFILES to TDEPFILES |
| * config/m68k/hp300hpux.mt: Mention GAS requirement. Remove |
| hp-include stuff. Add m68k-tdep.o to TDEPFILES. |
| |
| Wed Apr 28 13:27:54 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * ch-exp.y (yylex): Don't STREQ with simplename if it is NULL. |
| |
| Wed Apr 28 06:11:38 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * config/sparc/xm-sun4os4.h [__STDC__]: Don't use MALLOC_INCOMPATIBLE. |
| |
| Wed Apr 28 11:39:18 1993 Roland H. Pesch (pesch@fowanton.cygnus.com) |
| |
| * doc/gdb.texinfo: make node "Shell Commands" unconditional; |
| describe `set demangle-style arm' (not cfront); |
| mention can type `q' to discard output, when gdb pages |
| |
| Wed Apr 28 11:32:39 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * valops.c (search_struct_field): Fix gdb core dump with incomplete |
| stabs info. |
| |
| Wed Apr 28 06:11:38 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * remote.c: Change timeout to 2. |
| (remote_open): Use unpush_target not remote_close. |
| (remote_resume): If siggnal != 0, give warning not error(). |
| (remote_wait, remote_interrupt, remote_interrupt_twice): |
| If we get two interrupts, let the user get out if they want. |
| (remote_{kill,mourn}): New functions. |
| i386-stub.c (handle_exception, case 'k'): Don't BREAKPOINT. |
| |
| Wed Apr 28 09:20:55 1993 Ian Lance Taylor (ian@rtl.cygnus.com) |
| |
| * config/sparc/sun4sol2.mh (XM_CLIBS): Define to be -lnsl. |
| |
| Wed Apr 28 06:11:38 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * Remote targets (mourn): Call unpush_target. |
| |
| * config/sparc/xm-sun4os4.h: Declare free() to return int. |
| Remove twisted use of PARAMS. |
| |
| * config/rs6000/xm-rs6000.h: Don't define MALLOC_INCOMPATIBLE now |
| that ansidecl.h assumes ANSI on AIX. |
| |
| Tue Apr 27 10:01:33 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * README: Move most stuff about hacking GDB to doc/gdbint.texinfo. |
| (Known bugs): Remove AIX bugs, revise SPARC struct bug description. |
| |
| Tue Apr 27 13:44:19 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * expprint.c (print_subexp): Fix bug with OP_SCOPE operator output. |
| |
| Tue Apr 27 10:01:33 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * remote-vx.c (net_connect): Allow numeric IP address for host. |
| |
| Mon Apr 26 17:59:38 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * config/sh/sh.mt, config/sh/tm-sh.h, sh-tdep.c: New files. |
| |
| Mon Apr 26 07:13:32 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * rs6000-tdep.c (branch_dest): Deal with stepping through system call. |
| |
| * symtab.h, xcoffread.c: Revise linetable sorting comments. |
| |
| Sun Apr 25 02:32:16 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * valops.c (value_cast): A cast might also change the object |
| representation in C++. |
| * dbxread.c (end_psymtab): Copy subpst read_symtab function from pst |
| to get the proper read_symtab function when called from mipsread.c. |
| * mipsread.c (mipscoff_psymtab_to_symtab, psymtab_to_symtab_1): |
| Set cur_bfd in psymtab_to_symtab_1 as CURBFD(pst) is invalid |
| for dummy psymtabs, inhibit processing of dummy psymtabs. |
| |
| Sat Apr 24 19:59:54 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * Changes from (or inspired by) AMD: |
| * remote-udi.c (udi_attach): Assignments to Space and Offset were |
| switched, fix it. |
| (udi_wait): Make error message (UDIGetStdout) match error. |
| (udi_wait): Handle UDIStdinNeeded. |
| * command.c [CANT_FORK]: Use system(). |
| * utils.c (prompt_for_continue): Allow quit with 'q'. |
| |
| * solib.c (solib_add): Don't call special_symbol_handling if there |
| were errors in symbol_add_stub. Also set so->from_tty before |
| calling symbol_add_stub. |
| |
| Fri Apr 23 16:17:00 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * Merge in HPPA/BSD patches from Utah: |
| * defs.h: Add const to 2nd arg of psignal prototype. |
| * hppah-tdep.c: Renamed to hppa-tdep.c 'cuz it's common code with |
| BSD now. |
| * hppab-core.c: Deleted. No longer useful. |
| * hppab-nat.c: #include more files. Use PT_WUREGS, not |
| PT_WRITE_U. |
| * hppab-tdep.c: Deleted. Supplanted by hppa-tdep.c. |
| * config/pa/hppabsd.mh (NATDEPFILES): Remove hppab-core.o. |
| * config/pa/hppabsd.mt (TDEPFILES): hppab-tdep.o => hppa-tdep.o |
| * config/pa/hppahpux.mt (TDEPFILES): hppab-tdep.o => hppa-tdep.o |
| * config/pa/xm-hppab.h: #define SET_STACK_LIMIT_HUGE. |
| |
| Fri Apr 23 10:34:02 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * Fix two bugs found by deja-gnu. One is the incorrect reporting |
| of the PC being in a stack dummy when looking at a core file |
| without symbols. The other is the incorrect passing of char |
| arguments during expression evaluation (ie: p foo('a','b') would |
| mess up the passing of it's args because it wasn't coercing the |
| char's to ints). |
| * hppah-tdep.c: Rename global functions to have consistent hppa_ |
| prefix. Make more functions static. Drop hp_ prefix from static |
| functions. (hppa_push_arguments): Call value_arg_coerce to cast |
| char to int args if necessary. (hppa_fix_call_dummy): Create |
| this routine from FIX_CALL_DUMMY macro in tm-hppa.h. |
| * inferior.h (PC_IN_CALL_DUMMY): Check for frame_address being |
| valid (ie: != 0) before doing comparison against PC. |
| * valops.c (call_function_by_hand): Adjust call to FIX_CALL_DUMMY |
| to reflect new arguments. |
| * config/pa/tm-hppa.h (POP_FRAME, PUSH_ARGUMENTS): Use new hppa_ |
| prefix for func name. (FIX_CALL_DUMMY): Move code into |
| hppah-tdep.c. |
| |
| * testsuite/gdb.t16/gdbme.c, testsuite/gdb.t17/gdbme.c: Add calls |
| to malloc() so that we can test GDB eval of dynamically created |
| arrays (like char strings in `print "foo"'). |
| |
| Fri Apr 23 01:28:14 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * printcmd.c (print_address_symbolic): Search symtabs as well as the |
| minimal symbols for a nearby symbol. |
| |
| Thu Apr 22 19:44:21 1993 John Gilmore (gnu@cacophony.cygnus.com) |
| |
| * coffread.c: Comment changes around minimal symbol recording. |
| |
| Thu Apr 22 16:24:36 1993 K. Richard Pixley (rich@rtl.cygnus.com) |
| |
| * command.c: comment changes only. |
| |
| * mips-tdep.c (heuristic_fence_post): new static variable. |
| (heuristic_proc_start): use heuristic_fence_post, print better |
| warnings, but only if not stop_soon_quietly. |
| (_initialize_mips_tdep): add_set_cmd for heuristic-fence-post. |
| |
| Thu Apr 22 14:50:05 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * symtab.h: Fix LOC_REF_ARG comment. |
| |
| Wed Apr 22 20:21:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| and Jim Kingdon (kingdon@cygnus.com) |
| |
| * stabsread.c (define_symbol): Combine a 'p', 'r' arg pair to a |
| LOC_REGPARM symbol. |
| * config/sparc/tm-sparc.h (REG_STRUCT_HAS_ADDR): Revise comments. |
| symfile.c (compare_symbols): Don't check first character; STRCMP |
| does that. |
| |
| * stabsread.c (define_symbol): Generate a LOC_REGPARM_ADDR for |
| structures that are passed by address in a register. |
| * symtab.h (enum address_class): Add LOC_REGPARM_ADDR. |
| * findvar.c (read_var_value), |
| printcmd.c (address_info, print_frame_args), |
| stack.c (print_frame_arg_vars), symmisc.c (print_{,partial_}symbol), |
| * symtab.c (lookup_block_symbol): Deal with it. |
| |
| Thu Apr 22 09:07:24 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * objfiles.h (obj_section), objfiles.c (build_objfile_section_table): |
| Add objfile field. |
| * objfiles.c (find_pc_section): Return a struct obj_section *. |
| * sparc-tdep.c (in_solib_trampoline): Deal with find_pc_section return. |
| * symfile.c (syms_from_objfile) [IBM6000_TARGET]: |
| Don't use obj_section hack. |
| * xcoffexec (vmap_symtab): Relocate obj_sections. |
| * printcmd.c (containing_function_bounds): Use find_pc_section. |
| |
| * symtab.h: Clean up SYMBOL_VALUE comments. |
| |
| Wed Apr 21 14:29:57 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * stack.c (print_frame_arg_vars), printcmd.c (print_frame_args): |
| Expand comments about LOC_ARG/LOC_LOCAL pairs. |
| |
| * coffread.c (read_coff_symtab): Use rewind before fseek. |
| |
| Wed Apr 21 14:24:19 1993 Per Bothner (bothner@cygnus.com) |
| |
| * ch-exp.y: Removed unused structure_primitive_value and FIXME_23. |
| * Makefile.in: Add $(YFLAGS) when using $(YACC). |
| * Makefile.in: Remove message to expect conflicts and unused |
| rules in ch-exp.y, since there no longer are any such. |
| |
| Wed Apr 21 13:27:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * stabs.texinfo: fixed bad xrefs (un-initialized statics) |
| |
| Tue Apr 20 08:55:11 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffexec.c (xcoff_relocate_core): If no exec file, error() |
| rather than dumping core. |
| |
| * Makefile.in: Add ${srcdir}/ to all source files. |
| (alldeps.mak): Add "${srcdir}/" to files when generating alldeps.mak. |
| (TAGS): Deal with srcdir and new config directory scheme. |
| createtags: Remove. |
| Makefile.in (NONSRC): Remove createtags. |
| alldeps.mak: Updated. |
| |
| * rs6000-tdep.c: Delete unused function print_frame. |
| |
| * frame.h (struct frame_info): Doc fix for next_frame. |
| New field signal_handler_caller. |
| blockframe.c (create_new_frame, get_prev_frame_info), |
| config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO): Set it (needs |
| INIT_FRAME_PC_FIRST). |
| stack.c (print_frame_info), rs6000-tdep.c (rs6000_frame_chain): |
| Check it. |
| |
| Mon Apr 19 22:52:33 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * irix4-nat.c (fetch_core_registers): Special version of this for |
| Irix 4.x, which stores regs a bit differently from other /proc |
| based systems. |
| * procfs.c, core-svr4.c: Move fetch_core_registers from procfs.c |
| to new file core-svr4.c. |
| * config/i386/i386sol2.mh, config/i386/i386v4.mh, config/m68k/amix.mh, |
| config/i386/ncr3000.mh, config/sparc/sun4sol2.mh: Add core-svr4.o |
| to NATDEPFILES. |
| * config/mips/irix4.mh: Add corelow.o to NATDEPFILES. |
| |
| Mon Apr 19 11:13:34 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * i387-tdep.c: Remove unused #includes. |
| |
| * configure.in: Match i[34]86-*-sysv3.2 not i[34]86-*-sysv32. |
| |
| * config/i386/nm-i386v.h: Define NO_PTRACE_H. |
| |
| Sun Apr 18 10:39:35 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffread.c: Nuke NO_DEFINE_SYMBOL code. There is no going back. |
| |
| * stabsread.c (define_symbol): 'R' is synonym for 'P', not 'r'. |
| xcoffread.c (process_xcoff_symbol, case C_RPSYM): |
| Don't muck with SYMBOL_CLASS. |
| |
| Fri Apr 16 17:38:33 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * munch: Don't use head command. It doesn't exist everywhere. |
| |
| Fri Apr 16 15:07:57 1993 Fred Fish (fnf@cygnus.com) |
| |
| * inflow.c (new_tty): Remove spurious 'o' character at end |
| of #endif line. |
| |
| Fri Apr 16 12:27:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mips-tdep.c (mips_skip_prologue): Always skip the typical prologue |
| instructions and nothing more. |
| * mipsread.c (add_line): Add comment why we have to combine line number |
| entries for the same line number. |
| |
| Fri Apr 16 09:42:03 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * symtab.{c,h}: Doc fixes (remove symseg references, last relevant |
| in gdb 2.8!). |
| |
| Thu Apr 15 21:16:58 1993 Fred Fish (fnf@cygnus.com) |
| |
| * depend, alldeps.mak: Update, now that gcc -MM bug is fixed. |
| |
| Thu Apr 15 12:38:39 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * source.c (select_source_symtab): Clean up comment. Also, if |
| we have a current_source_symtab, and s is NULL, return without |
| doing anything. |
| xcoffread.c (xcoff_symfile_read): Don't call select_source_symtab. |
| breakpoint.c (breakpoint_re_set): Don't call select_source_symtab. |
| |
| Thu Apr 15 02:37:48 1993 John Gilmore (gnu@cacophony.cygnus.com) |
| |
| * dbxread.c (unknown_symchar_complaint): Add new complaint. |
| * stabsread.h: Declare it. |
| * partial-stab.h: Use it. |
| |
| * utils.c (malloc_botch): Don't forward-declare if NO_MMALLOC. |
| |
| Wed Apr 14 17:12:51 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * stack.c (print_frame_info): Print specially if dummy frame. |
| |
| * breakpoint.c: Add comments regarding within_scope future direction. |
| |
| * Version 4.8.3. |
| |
| * xcoffread.c (record_include_{begin,end}): Change fatal to complain. |
| |
| Wed Apr 14 14:03:18 1993 Per Bothner (bothner@cygnus.com) |
| |
| * ch-exp.y: Fix thinko that broke parsing of FALSE. |
| |
| Wed Apr 14 12:49:29 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * stabsread.c (read_member_functions): Initialize domain for stubbed |
| member functions to avoid gdb core dumps when printing pointers |
| to member functions. |
| * cp-valprint.c (cp_print_class_method): Check for stubbed member |
| functions. |
| |
| Tue Apr 13 08:28:26 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * expprint.c (print_subexp): If opcode not found in op_print_tab, |
| stop with an error(). |
| eval.c (evaluate_subexp): Change error message. |
| |
| * objfiles.c (build_objfile_section_table): Cast return value |
| from obstack_finish. |
| |
| Mon Apr 12 10:53:50 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * config/rs6000/tm-rs6000.h, rs6000-tdep.c: Move FRAME_CHAIN |
| to rs6000_frame_chain and deal with it if we're in a signal handler. |
| (FRAME_SAVED_PC): Use rs6000_frame_chain. |
| |
| * breakpoint.c (within_scope): New function. |
| (enable_breakpoint, watchpoint_check): Use it. |
| |
| * source.c (openp): Handle "exec-file ./ls" correctly. |
| |
| * breakpoint.c (breakpoint_1): Use wrap_here before "at". |
| |
| Sat Apr 10 01:32:43 1993 Per Bothner (bothner@rtl.cygnus.com) |
| |
| * ch-exp.y: Clean up lexing of identifiers and |
| reserved words. (E.g. don't recognize FALSEXXX as the |
| keyword FALSE followed by the identifier XXX.) |
| Also, convert identifiers to lower case. |
| |
| Fri Apr 9 15:53:19 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * remote-mips.c, remote-monitor.c, remote-st2000.c: Convert to |
| new serial interface. |
| |
| Fri Apr 9 15:01:12 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * remote.c (remote_open): Use SERIAL_OPEN instead of serial_open. |
| (putpkt, getpkt): Use new return codes for SERIAL_READCHAR. |
| * ser-go32.c: Return -1 on most failures, 0 on most successes, |
| and use new return codes for go32_readchar(). |
| * ser-unix.c: Ditto. Also, move error handling up to caller for |
| SERIAL_SETBAUDRATE(). |
| * serial.c (serial_open): Internal call, not SERIAL_OPEN to get |
| to specific routine. |
| (serial_close): New routine to wrap around device close routine. |
| serial.h: Clean & document return values more clearly. |
| |
| Fri Apr 9 10:20:55 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * rs6000-pinsn.c (print_operand): Deal with no operand instructions. |
| |
| * rs6000-pinsn.c (print_operand, case LI): Print condition register |
| operand in decimal rather than wrong textual versions. |
| |
| * printcmd.c (_initialize_printcmd): Clean up docstring for "x" |
| (mention 't', remove false thing about 'g' only good with 'f'). |
| |
| * breakpoint.h: move "struct breakpoint" and friends to top of |
| file so that bpstat_find_breakpoint prototype works. |
| |
| * solib.c (struct so_list): Add bfd field. |
| (solib_map_sections): Leave bfd open and scratch_pathname allocated. |
| Put the bfd in bfd field of the so_list. |
| (clear_solib): Free bfd name and close_bfd on the bfd. |
| |
| Fri Apr 9 00:45:41 1993 Per Bothner (bothner@rtl.cygnus.com) |
| |
| * valarith.c (value_subscript): Add COERCE_REF. |
| * ch-exp.y (operand_5): We can generalize the 2nd operand |
| of a string repetition ot 'literal' without ambiguity. |
| |
| Thu Apr 8 10:15:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * breakpoint.h (struct bpstat): Remove momentary field. |
| Remove bpstat_momentary_breakpoint. This was always kludgy |
| and is no longer used. |
| |
| * breakpoint.h: Add enum bpstat_what. |
| breakpoint.h (struct bpstat), breakpoint.c (bpstat_stop_status): |
| stop and print fields of bpstat now per-breakpoint, not just |
| one for the whole chain. |
| breakpoint.{c,h} (bpstat_what): New function. |
| breakpoint.h: Remove bpstat_stop and bpstat_should_print. |
| infrun.c: Replace switch (stop_bpstat->breakpoint_at->type) |
| with call to bpstat_what. |
| README: Remove watchpoint/breakpoint bug from known bugs. |
| |
| * breakpoint.h: Prototype bpstat_find_breakpoint. |
| |
| Thu Apr 8 16:01:21 1993 Fred Fish (fnf@cygnus.com) |
| |
| * symtab.c (find_methods, gdb_mangle_name): Note that functions |
| are g++ specific. |
| * symtab.h (VTBL_FNADDR_OFFSET, OPNAME_PREFIX_P, VTBL_PREFIX_P, |
| DESTRUCTOR_PREFIX_P): Note that macros are g++ specific. |
| |
| Thu Apr 8 12:45:32 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * i960-pinsn.c (tabent): Copied struct definition from |
| opcodes/i960-dis.c. |
| |
| Thu Apr 8 10:34:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * symtab.h (DESTRUCTOR_PREFIX_P): New macro to check if physname |
| is a C++ destructor. |
| * symtab.c (gdb_mangle_name): Use it. |
| * symtab.c (find_methods): Do not add destructors to choice list |
| for constructors. |
| * symtab.c (decode_line_1): Make breakpoints on destructors work |
| for gcc-2.x again. |
| |
| Wed Apr 7 18:43:09 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * ser-go32.c: Make it use serial port name. |
| * go32-xdep.c: Put in def for strlwr, needed by dir.o in go32 libc. |
| |
| * infcmd.c (read_pc): Make sure that we read PC_REGNUM when not |
| in a system call! |
| |
| Wed Apr 7 15:52:11 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * configure.in: Only configure sparclite subdir when target_cpu |
| is sparclite. |
| |
| Wed Apr 7 10:11:22 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffread.c (struct coff_symbol): Change c_sclass to unsigned char. |
| Remove FIXME comment regarding this. |
| |
| * symfile.h: Change NULL->'\0' in comment (that wasn't a typo). |
| |
| * xcoffread.c (read_xcoff_symtab): Use E_SYMNMLEN. |
| |
| Tue Apr 6 22:30:58 1993 K. Richard Pixley (rich@cygnus.com) |
| |
| Add section table to objfile struct. Use it for find_pc_section. |
| * objfiles.c (add_to_objfile_sections, |
| build_objfile_section_table, find_pc_section): new functions. |
| (allocate_objfile): build section table. |
| * objfiles.h (struct obj_section): new structure. |
| (struct objfile): add section table. |
| (find_pc_section): new prototype. |
| * solib.[ch] (find_pc_section_from_so_list): removed. |
| * sparc-tdep.c: include objfiles.h for find_pc_section. include |
| symfile.h for objfiles.h. |
| (in_solib_trampoline): adjusted for new find_pc_section |
| prototype. Removed BAD_RICH_HACK ifdefs. |
| * symfile.c (syms_from_objfile): offset objfile sections. |
| (find_pc_section): removed. Also removed BAD_RICH_HACK ifdefs. |
| * symfile.h (find_pc_section): prototype removed. Also fixed |
| comment typo NUL -> NULL. |
| * target.[ch] (find_pc_section_from_targets): removed. |
| * config/sparc/tm-sun4sol2.h (BAD_RICHH_HACK): removed. |
| |
| Tue Apr 6 21:41:13 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * ser-go32.c: Format. (go32_open): Use proper return value. |
| |
| * configure.in: Undo conditional configdirs hack for sparclite. |
| |
| Tue Apr 6 17:07:37 1993 Jim Wilson (wilson@sphagnum.cygnus.com) |
| |
| * symtab.c (list_symbols): When call break_command, pass both |
| filename and function name not just function name. |
| |
| Tue Apr 6 15:00:09 1993 Fred Fish (fnf@cygnus.com) |
| |
| (Changes and new files to make "none" a full fledged configuration) |
| * config/none/{nm-none.h, tm-none.h, xm-none.h}: New files. |
| Currently only tm-none.h has any meaningful contents. |
| * config/none/none.mh (NAT_FILE): Use nm-none.h |
| * config/none/none.mh (XM_FILE): Use xm-none.h |
| * config/none/none.mt (TM_FILE): Use tm-none.h |
| * Makefile.in (depend): Remove comment about parse errors in |
| valops.c, it now parses correctly and generates a correct depend |
| line. Remove line that touches xm.h, tm.h, and nm.h; they are |
| now linked to config/none/{xm-none.h, tm-none.h, nm-none.h}. |
| |
| Tue Apr 6 09:54:29 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * values.c (USE_STRUCT_RETURN): Only use gcc wierdness for gcc1. |
| |
| * xcoffread.c (read_xcoff_symtab): Deal correctly with symbols of |
| exactly 8 characters. |
| |
| Tue Apr 6 10:31:26 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * configure.in: Sparclite uses sparc config dir. Also has it's |
| own tm- & .mt files now. Also add sparclite to configdirs. |
| * go32-xdep.c: Dummy routines for sigsetmask & strlwr. |
| * config/i386/go32.mh: Nullify def of TERMCAP. |
| * config/i386/xm-go32.h: Get rid of redef of EIO. |
| * config/sparc/{sparclite.mh tm-sparclite.h}: New sparclite |
| specific configs. Very similar to sun4os4, but without solib. |
| * sparclite/{Makefile.in configure.in}: First cut at making this |
| dir configgable. |
| |
| Tue Apr 6 03:10:44 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * ser-go32.c: First cut at adapting to new serial interface. |
| |
| Mon Apr 5 22:29:43 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * Makefile.in (SFILES OBS): Add serial.[co] & ser-hardwire.[co]. |
| These implement a new serial line interface for talking to remote |
| targets. |
| * configure.in: Link ser-hardwire.c to ser-unix.c for all hosts, |
| EXCEPT go32, which gets ser-go32.c. |
| * remote.c: Use new serial interface. More remote-xxx's to be |
| converted later. |
| * ser-bsd.c, ser-termios.c: Removed. |
| * serial.c: New. Implements common operations for all serial |
| types. |
| * ser-unix.c: New. Unix specific serial operations for various |
| flavors of Unix (Posix, SysV, BSD). |
| * serial.h: Generic serial interface defs. |
| * config/i386/go32.mh, config/i386/i386bsd.h, |
| config/m68k/apollo68b.mh, config/sparc/sun4os4.mh: Remove |
| ser-bsd.o from XDEPFILES. All the magic is now handled in |
| configure.in. |
| |
| Mon Apr 5 20:48:54 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * config/h8500/tm-h8500.h: Clean up brain damage found by GCC. |
| |
| Fri Apr 2 08:23:14 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffread.c (xcoff_symfile_offsets): Use 0 not addr for offsets. |
| |
| * rs6000-tdep.c (frameless_function_invocation): Don't even think |
| about framelessness except on the innermost frame. |
| |
| * xcoffexec.c: Call fatal() not abort(). |
| |
| * stabsread.c (patch_block_stabs): If stab & no symbol, make |
| a LOC_OPTIMIZED_OUT symbol. |
| symtab.h (enum address_class): Add LOC_OPTIMIZED_OUT. |
| findvar.c (read_var_value), printcmd.c (address_info), |
| symmisc.c (print_{,partial_}symbol), c-exp.y (variable), |
| m2-exp.y (yylex): Deal with it. |
| ch-exp.y (yylex): Deal with it. |
| |
| Thu Apr 1 18:43:02 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * findvar.c (value_from_register): H8500 specific, check to see |
| if we are looking at short pointer. If so, skip crock. |
| * h8500-tdep.c (h8500_frame_chain): Mask down value from |
| read_memory_integer() to avoid getting messed up by sign extension. |
| |
| Thu Apr 1 16:44:41 1993 K. Richard Pixley (rich@rtl.cygnus.com) |
| |
| * sparc-tdep.c (in_solib_trampoline), symfile.c (find_pc_section): |
| ifdef protect using BAD_RICH_HACK. This should be removed soon. |
| * config/sparc/tm-sun4sol2.h (BAD_RICH_HACK): define. |
| |
| Thu Apr 1 09:01:38 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * i960-pinsn.c, a29k-pinsn.c: Much abridged, just use libopcodes.a. |
| |
| * core.c (dis_asm_print_address): New function. |
| |
| * core.c (dis_asm_read_memory): Reinstate 4th arg. The prototype |
| has been fixed. |
| |
| Thu Apr 1 09:34:43 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * breakpoint.c (bpstat_print, bpstat_stop_status): Change to walk the |
| entire breakpoint chain and print only the first entry that needs to |
| be printed and needs to be stopped for. Fixes problems with printing |
| of multiple breakpoints with different conditions. |
| * breakpoint.c (print_it_done): Renamed from print_it_noop as it |
| effectively stops printing of the breakpoint chain. |
| * breakpoint.c (print_it_noop): New routine to print nothing |
| for this breakpoint entry and dont stop printing. |
| * breakpoint.c (breakpoint_re_set_one): mention the reevaluated |
| watchpoint only if it is enabled. |
| * mipsread.c (parse_procedure): Correct incorrect setjmp procedure |
| descriptor from the library to make backtraces through setjmp work. |
| * mipsread.c (fixup_sigtramp): Correct pcreg and fregoffset for |
| sigtramp. |
| * mips-tdep.c (read_next_frame_reg): Provide correct values for |
| all registers saved within sigtramp, cleanup. |
| |
| Wed Mar 31 12:52:12 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * sparc-pinsn.c: Much abridged, just calls version in libopcodes.a. |
| |
| Wed Mar 31 21:23:41 1993 K. Richard Pixley (rich@rtl.cygnus.com) |
| |
| * core.c (dis_asm_read_memory): drop fourth arg which conflicts |
| with prototype in ../include/dis-asm.h. |
| |
| Wed Mar 31 12:52:12 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * core.c (dis_asm_{read_memory,memory_error}): New functions. |
| m68k-pinsn.c, h8500-tdep.c, i386-pinsn.c, mips-pinsn.c, z8k-tdep.c: |
| Use read_memory_func interface to disassembler. |
| |
| Tue Mar 30 15:46:14 1993 K. Richard Pixley (rich@rtl.cygnus.com) |
| |
| Teach sparc solaris to next over shared library functions. |
| * solib.[hc] (find_pc_section_from_so_list): new function and |
| prototype. |
| * sparc-tdep.c (in_solib_trampoline): new function. |
| * symfile.[hc] (find_pc_section): new function and prototypes. |
| * target.[hc] (find_pc_section_from_targets): new function and |
| prototypes. |
| * config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE): redefine to |
| in_solib_trampoline. |
| |
| Tue Mar 30 08:06:24 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * infrun.c (wait_for_inferior): Revise comment. |
| |
| * command.c (do_setshow_command): Use %u with var_{u,z}integer. |
| |
| * command.{c,h}: New var_type var_integer. |
| main.c: Use it for history_size. |
| |
| * rs6000-tdep.c, xcoffexec.c, config/rs6000/xm-rs6000.h, breakpoint.c: |
| Lint and byte-order fixups. |
| |
| * breakpoint.c (print_it_normal): Return 0 after hitting watchpoint. |
| |
| * breakpoint.h (bpstat): New field print_it. |
| breakpoint.c (bpstat_print): Use it. |
| (print_it_normal): New function (from old bpstat_print code). |
| (bpstat_{alloc,stop_status}): Set print_it field. |
| |
| * breakpoint.c (bpstat_stop_status): Use catch_errors when |
| evaluating watchpoint condition, via new function watchpoint_check. |
| Also stop if watchpoint disabled due to leaving its block. |
| |
| * findvar.c [REG_STRUCT_HAS_ADDR]: Add comment. |
| |
| Tue Mar 30 00:14:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mips-pinsn.c: Add missing include of dis-asm.h. |
| |
| Mon Mar 29 15:03:25 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (clean, distclean, realclean): Recursively apply |
| to subdirs first, rather than last. This avoids, for example, |
| Makefile being removed in a parent directory before the recursive |
| make is run. |
| |
| * alldeps.mak, depend: Update for below changes. |
| |
| * config/m68k/tm-m68k.h: Renamed from config/m68k/tm-68k.h. |
| * m68k/{tm-3b1.h, tm-altos.h, tm-amix.h, tm-es1800.h, |
| tm-hp300bsd.h, tm-hp300hpux.h, tm-isi.h, tm-news.h, tm-os68k.h, |
| tm-st2000.h, tm-sun2.h, tm-sun3.h, tm-vx68.h}: Include tm-m68k.h |
| instead of tm-68k.h. |
| * Makefile.in (HFILES): tm-68k.h renamed to tm-m68k.h. |
| * README, a29k-pinsn.c, m68k-pinsn.c, m68k-stub.c, remote-vx.c, |
| m68k/{altos.mh, altos.mt, apollo68b.mh, nm-apollo68b.h, |
| nm-hp300bsd.h, config/m68k/xm-apollo68b.h}: Map '68k' to 'm68k'. |
| * a29k/tm-a29k.h, doc/gdbint.texinfo: Account for renaming of |
| tm-68k.h to tm-m68k.h. |
| * m68k/m68k-fp.mt (TM_FILE): tm-68k-fp.h renamed to tm-m68k-fp.h. |
| * m68k/m68k-nofp.mt (TM_FILE): tm-68k-nofp.h renamed to |
| tm-m68k-nofp.h. |
| |
| * config/a29k/tm-a29k.h: Renamed from config/a29k/tm-29k.h. |
| * a29k-pinsn.c: Renamed from am29k-pinsn.c. |
| * a29k-tdep.c: Renamed from am29k-tdep.c. |
| * remote-eb.c, config/a29k/tm-ultra3.h: Include renamed tm-a29k.h. |
| * remote-monitor.c, remote-st2000.c, config/a29k/{nm-ultra3.h, |
| tm-a29k.h, xm-ultra3.h}, config/romp/rtbsd.mh, doc/gdbinv-s.texi, |
| testsuite/gdb.t15/funcargs.exp, testsuite/gdb.t17/callfuncs.exp: |
| Map '29k' to 'a29k'. |
| * config/a29k/{a29k-kern.mt, a29k-udi.mt, a29k.mt, ultra3.mt} |
| (TDEPFILES): Use renamed a29k-pinsn.o and a29k-tdep.o. |
| * config/a29k/{a29k-udi.mt, a29k.mt} (TM_FILE): Use renamed |
| tm-a29k.h. |
| * config/a29k/a29k-udi.mt (MT_CFLAGS): Remove TARGET_AM29K |
| define that does not appear anywhere else in the gdb source tree. |
| * doc/gdbinit.texinfo: Document renaming of tm-29k.h to tm-a29k.h. |
| |
| Mon Mar 29 13:55:29 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * breakpoint.c: Add comments regarding breakpoint_re_set. |
| |
| * xcoffread.c (sort_syms, compare_symbols): Remove. |
| (xcoff_symfile_read): Use sort_all_symtab_syms from symfile.c |
| not our own sort_syms (it is identical). |
| |
| * xcoffread.c: Nuke NAMES_HAVE_DOT define (not used). |
| |
| Sun Mar 28 11:24:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * breakpoint.c (breakpoint_re_set_one): Fix storage leak. |
| * breakpoint.c (enable_breakpoint): Don't enable watchpoint if it |
| went out of scope. |
| * exec.c (exec_close): Fix storage leak. |
| * exec.c (exec_file_command): Make sure that bfd doesn't realign the |
| output sections when patching an executable. |
| * mips-nat.c (store_inferior_registers): Use REGISTER_PTRACE_ADDR |
| when writing all registers. |
| * mips-tdep.c (mips_push_dummy_frame): Save floating point registers |
| at the right offset in the dummy frame. |
| * mipsread.c (psymtab_to_symtab_1): Do not complain for stProc, |
| stStaticProc and stEnd symbols as they are generated by gcc-2.x. |
| * mipsread.c (mipscoff_new_init): Initialize stabsread and buildsym. |
| |
| Fri Mar 26 15:25:05 1993 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in (TARFILES): Avoid trailing backslash. |
| |
| Fri Mar 26 11:29:30 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * breakpoint.{c,h}: Add exp_string to struct breakpoint and use |
| it in breakpoint_re_set. |
| * breakpoint.c (watch_command, enable_breakpoint): Fetch lazy values. |
| |
| * rs6000-tdep.c (single_step): Misc cleanups (CORE_ADDR not int, |
| don't use sizeof(int) for target stuff, etc). |
| |
| Thu Mar 25 15:03:53 1993 Fred Fish (fnf@cygnus.com) |
| |
| * alldeps.mak, configure.in, i860-break.h, i860-opcode.h, |
| i860-pinsn.c, i860-tdep.c, config/i860/*: Remove incomplete i860 |
| support that can't be integrated anyway due to lack of clear |
| authorship. |
| |
| Thu Mar 25 12:26:50 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * findvar.c (read_register, write_register): Make these capable |
| of reading/writing registers that are shorter than REGISTER_TYPE. |
| * (value_from_register): Install H8500 specific code to return |
| proper value when register is being used as a pointer. |
| * h8500-tdep.c: Remove extra defines of NUM_REGS. |
| (h8500_skip_prologue): Use correct lengths for LINK instructions. |
| (FRAME_CHAIN): Change name to h8500_frame_chain. Rewrite code to |
| chain frames properly by combining frame pointer with T reg. |
| (init_extra_frame_info): Delete. It's now a macro. |
| (frame_args_address): Don't add PTR_SIZE. Stack args are already |
| offset by the correct amount off of the frame pointer. |
| (register_byte): Delete. It's now a macro. |
| (register_raw_size, register_virtual_size): Delete. Replaced by |
| common routine h8500_register_size, cuz there's no difference |
| between the raw & virtual sizes on this machine. |
| (register_convert_to_raw, register_convert_to_virtual): Delete, |
| cuz there's no difference between the raw & virtual forms. |
| Replaced by memcpy in tm file. |
| (register_virtual_type): Rename to h8500_register_virtual_type. |
| Get rid of pointer pseudo-regs, use _REGNUM with all reg names. |
| (_initialize_h8500_tdep): Get rid of crock to ensure that GDB & |
| emulator have same reg offsets. This is all handled in the |
| simulator code now. |
| (h8500_trapped_internalvar): New routine to detect references to |
| convenience vars acting as pointer pseudo-regs. |
| (h8500_value_trapped_internalvar): Conjure up value of pointer |
| pseudo-regs. |
| (h8500_set_trapped_internalvar): Convert set value in real |
| register references. |
| infcmd.c (read_pc, write_pc): Add h8500 specific code to handle |
| code segment register. |
| infrun.c (proceed): Simplify. Call write_pc instead of doing it |
| by hand. |
| (wait_for_inferior): Add h8500 specific code to add stack segment |
| when reading SP register. |
| remote-sim.c (fetch_register): Spacing. |
| tm-h8500.h: #define GDB_TARGET_IS_H8500 to make it easier to |
| detect cruft. Redo all register manipulation stuff. Get rid of |
| pointer pseudo-regs. (INIT_EXTRA_FRAME_INFO): Adds stack segment |
| to frame pointer. (IS_TRAPPED_INTERNALVAL, |
| VALUE_OF_TRAPPED_INTERNALVAR, SET_TRAPPED_INTERNALVAR): Use these |
| to create internal vars for pointer pseudo-regs. |
| |
| Thu Mar 25 10:10:28 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in: Numerous small changes to macro definitions |
| and rules for building gdb distribution tree. Many macros |
| eliminated or merged, and rules simplified. |
| * alldeps.mak: Update. |
| * depend: Update. |
| |
| Wed Mar 24 13:52:29 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) |
| |
| * Makefile.in: recurse through SUBDIRS for dvi target too |
| |
| Wed Mar 24 08:48:30 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * Clean up xcoff relocation. |
| objfiles.h (struct objfiles): Add section_offsets, num_sections. |
| symfile.c (syms_from_objfile), xcoffread.c (xcoff_symfile_offsets): |
| Set them. |
| symtab.h (struct general_symbol_info): Add section field. |
| minsyms.c (prim_record_minimal_symbol{,_and_info}): Set it. |
| xcoffread.c: Set section for symbols and msymbols. |
| (struct symtab): Add block_line_section field. |
| buildsym.c (end_symtab): Set it. |
| (end_symtab and callers): Add section parameter. |
| objfiles.c (objfile_relocate): New funciton. |
| xcoffexec.c (vmap_symtab): Use it. |
| xcoffsolib.h (struct vmap): Remove unused fields. |
| config/rs6000/tm-rs6000.h, stack.c, xcoffexec.c: Remove |
| CORE_NEEDS_RELOCATION, symtab_relocated. |
| config/rs6000/tm-rs6000.h: Remove use of loadinfotext. |
| rs6000-tdep.c: Make loadinfotext static. |
| breakpoint.c (fixup_breakpoints): Doc fix. |
| symtab.h (struct symtab), config/rs6000/tm-rs6000.h, buildsym.c |
| (end_symtab): primary field replaces nonreloc. |
| |
| Tue Mar 23 00:10:53 1993 John Gilmore (gnu@cygnus.com) |
| |
| * symtab.h (struct linetable_entry): Remove confusing comment. |
| |
| Tue Mar 23 00:01:23 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * Makefile.in: add installcheck target |
| |
| Mon Mar 22 16:17:58 1993 Fred Fish (fnf@cygnus.com) |
| |
| * config/{a29k, arm, convex, gould, h8300, i386, i860, i960, m68k, |
| m88k, mips, none, ns32k, pa, pyr, romp, rs6000, sparc, tahoe, vax, |
| z8k}: New directories to hold cpu specific configuration files. |
| Naming follows gcc convention. |
| * config/{*.mt, *.mh}: All target and host makefile fragment |
| config files moved to an appropriate config/<cpu> subdirectory. |
| * nm-*, xm-*, tm-*: All native, host, and target files, which |
| get linked to nm.h, xm.h, and tm.h respectively by configure, |
| moved to appropriate config/<cpu> subdirectory. |
| * nm-sysv4.h, xm-sysv4.h, tm-sysv4.h, tm-sunos.h, nm-trash.h: |
| Native, host, and target files that are common across more than |
| one cpu architecture and included by one of the configured |
| native, host, or target files, get moved to config directory. |
| * Makefile.in (INCLUDE_CFLAGS): Add -I${srcdir}/config to |
| pick up native, host, or target include files moved to one of |
| the config subdirectories, and that are included by other files. |
| * Makefile.in (alldeps.mak): Modify to account for new config |
| directory structure. |
| * alldeps.mak, depend: Update for new config directory structure. |
| * config/*/[ntx]m-*.h: Modify all files that include other |
| [ntx]m-*.h files to use path relative to gdb/config. I.E. |
| "a29k/tm-ultra3.h" includes "a29k/tm-29k.h" rather than just |
| "tm-29k.h". |
| * remote-eb.c (tm-29k.h): Include a29k/tm-29k.h. |
| * mipsread.c (tm-mips.h): Include mips/tm-mips.h. |
| * i860-pinsn.c (tm-i860.h): Include i860/tm-i860.h. |
| * configure.in: Default gdb_host_cpu to host_cpu, and remap |
| the ones where the default is not unique or different than the |
| config subdirectory name. Similarly, handle gdb_target_cpu. |
| Modify configure.in as appropriate to make use of gdb_host_cpu |
| and gdb_target_cpu to find makefile fragments and make links. |
| |
| Mon Mar 22 12:36:24 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mipsread.c (compare_blocks): Sort blocks with the same start |
| address by decreasing ending address. |
| |
| Mon Mar 22 20:36:04 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mipsread.c (parse_procedure): Save cur_fdr accross call to |
| lookup_symbol as it might get clobbered by the call. |
| |
| * mipsread.c (parse_partial_symbols): Use ADD_PSYMBOL_ADDR_TO_LIST. |
| The previous code did not initialize the language field for the psymtab |
| entry. |
| |
| Sat Mar 20 00:33:39 1993 John Gilmore (gnu@cygnus.com) |
| |
| * c-exp.y (parse_number): Avoid shift warning. |
| * serial.h (struct ttystate): Declare empty one on DOS. |
| |
| Fri Mar 19 12:59:50 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * xm-sun4os4.h: Return type of free() should be void, not int. |
| |
| * vx-share/vxWorks.h: Remove #def of NULL. |
| |
| Fri Mar 19 11:28:18 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * tm-rs6000.h: Nuke no-op STAB_REG_TO_REGNUM. |
| |
| Fri Mar 19 07:40:09 1993 Steve Chamberlain (sac@cygnus.com) |
| |
| * z8k-tdep.c (print_insn): Include the new dis-asm header file. |
| |
| Thu Mar 18 14:26:57 1993 Per Bothner (bothner@rtl.cygnus.com) |
| |
| * ieee-float.c: Moved to ../libiberty. |
| * ieee-float.h: Moved to ../include. |
| * Makefile.in: Update accordingly. |
| * i386-pinsn.c (print_insn), m68k-pinsn.c (print_insn): |
| Convert to stubs that call disassemblers in ../opcodes/*-dis.c. |
| * m68k-tdep.c: Removed definition of ext_format ext_format_68881; |
| it is now in ../opcodes/m68881-ext.c. |
| * mips-tdep.c (mips_skip_prologue): Try to skip more of the |
| prologue (some callers _do_ care). |
| * mips-pinsn.c (print_insn), z8k-tdep.c (print_insn): Convert to |
| new interface of ../opcodes/*-dis.c. |
| * ch-exp.y: Add #include <ctype.h>. |
| |
| Thu Mar 18 11:57:49 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffexec.c (exec_close): Don't close exec_bfd twice. |
| |
| * xcoffread.c (enter_line_range): endaddr is exclusive, not inclusive. |
| |
| Wed Mar 17 09:46:31 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffread.c (arrange_linetable): Use x{m,re}alloc not {m,re}alloc. |
| |
| Wed Mar 17 11:28:11 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * z8k-tdep.c (extract_return_value, write_return_value, |
| store_struct_return): New functions from macros in tm-z8k.h. |
| |
| Wed Mar 17 11:23:06 1993 Fred Fish (fnf@cygnus.com) |
| |
| * valops.c (value_arg_coerce): Apply temporary patch to |
| fix problem with coercion of array and function types when |
| passed as arguments to C functions, pending a more complete |
| review of when and how coercion should be done, depending |
| upon context and language. |
| |
| Wed Mar 17 09:46:31 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffread.c (MIN_TBTABSIZ): Change to 12. |
| |
| * xcoffread.c (xcoff_symfile_read): Only read stringtab and |
| debugsec if there are a non-zero number of symbols. |
| |
| Tue Mar 16 18:08:45 1993 John Gilmore (gnu@cygnus.com) |
| |
| * command.c (show_user): Avoid fprintf_filtered botch (AGAIN!). |
| |
| Tue Mar 16 15:18:17 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffexec.c (add_vmap): Wrap symbol read in catch_errors. |
| |
| * xcoffread.c (read_symbol_lineno): Look to end of symbols for .bf, |
| not just 50 symbols. |
| (symtbl_num_syms): New variable. |
| (read_xcoff_symtab): Set it. |
| (read_symbol_nvalue): Check for bad symno. |
| (read_symbol_{lineno,nvalue}, callers): Don't pass symtable; it's |
| always symtbl. |
| |
| Tue Mar 16 10:09:05 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * config/rs6000.mh: Get rid of -Dfd_set=int crock. |
| This is defined in defs.h if necessary. |
| * vx-share/vxWorks.h: Remove #defs of min and max. |
| * vx-share/xdr_ld.c, vx-share/xdr_ptrace.c, |
| vx-share/xdr_rdb.c: include defs.h. |
| |
| Fri Mar 12 09:33:23 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffread.c (retrieve_tracebackinfo): Move assignment out |
| of while condition. |
| |
| * xcoffread.c (enter_line_range): complain() on bad endoffset. |
| xcoffread.c: Doc fixes. |
| |
| Tue Mar 9 09:56:12 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * tm-rs6000.h (CORE_NEEDS_RELOCATION): Just call xcoff_relocate_core. |
| xcoffexec.c (xcoff_relocate_core): New function. |
| (text_adjustment): Removed. |
| (add_vmap): Return the vmap. |
| rs6000-tdep.c (add_text_to_loadinfo): No longer static. |
| |
| Fri Mar 5 05:22:46 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * xcoffsolib.h: Add objfile member to struct vmap. |
| xcoff{exec,solib}.c: Use it, not lookup_objfile_bfd. |
| xcoffexec.c (add_vmap): Allocate objfiles here. |
| |
| Sun Mar 14 02:54:15 1993 John Gilmore (gnu@cygnus.com) |
| |
| Support 68000 series without floating point. |
| |
| * configure.in (m68000-*-{aout,elf,coff}): New configs. |
| * tm-68k-nofp.h: New file, lacks 68881 support. |
| * config/m68k-nofp.mt: New file. |
| |
| Sun Mar 14 02:30:08 1993 John Gilmore (gnu@cygnus.com) |
| |
| Remove a few remaining underscore/no-underscore remnants from |
| config files. |
| |
| * config/{m68k-un.mt, sparc-un.mt}: Remove. |
| * config/m68k-noun.mt: Rename to m68k-fp.mt. |
| * config/sparc-noun.mt: Rename to sparc-em.mt. |
| * tm-68k-noun.h, tm-spc-noun.h: Remove. |
| * tm-68k-un.h: Rename to tm-68k-fp.h. |
| * tm-spc-un.h: Rename to tm-spc-em.h. |
| * tm-sun4sol2.h: Cleanup. |
| * configure.in (m68k-*, sparc-* targets): Corresponding changes. |
| |
| Sat Mar 13 14:58:22 1993 John Gilmore (gnu@cygnus.com) |
| |
| * symmisc.c (std_in, std_out, std_err): Move initializations |
| to runtime code, in case they aren't constant. |
| |
| Fri Mar 12 16:23:54 1993 K. Richard Pixley (rich@cygnus.com) |
| |
| * symtab.c (find_pc_symtab): some object file formats, notably |
| mips, have holes in the address ranges of symtabs. Change |
| this algorithm from first hit to tightest fit. |
| |
| * mips-tdep.c (heuristic_proc_start): if we walk the pc into the |
| fence post without finding the enclosing function, then print a |
| warning. |
| |
| Thu Mar 11 09:33:01 1993 Fred Fish (fnf@cygnus.com) |
| |
| * utils.c (fputs_demangled, fprint_symbol): Remove. |
| * utils.c (fprintf_symbol_filtered): New function which combines |
| the functionality of fputs_demangled and fprint_symbol. Uses a |
| caller provided language parameter to select the appropriate |
| demangler, and caller provided args to pass to the demangler. |
| * defs.h (enum language): Move further up in file so enum can |
| be used in prototypes. |
| * defs.h (fputs_demangled, fprint_symbol): Remove prototypes. |
| * defs.h (fprintf_symbol_filtered): Add prototype. |
| * c-typeprint.c (cp_type_print_method_args): Replace calls to |
| fputs_demangled with call to fprintf_symbol_filtered. |
| * cp-valprint.c (demangle.h): Include |
| * cp-valprint.c (cp_print_value_fields): Replace calls to |
| fprint_symbol with calls to fprintf_symbol_filtered. |
| * printcmd.c (print_frame_args): Replace call to fprint_symbol |
| with call to fprintf_symbol_filtered. |
| * stack.c (print_frame_info): Remove obsolete code so we don't |
| have to update fputs_demangled usage in it. |
| * stack.c (print_frame_info, frame_info): Add language variable |
| to pass to fprintf_symbol_demangled and initialize it from the |
| symbol's language. Replace calls to fputs_demangled with calls |
| to fprintf_symbol_filtered. |
| * symtab.c (find_methods): Replace call to fputs_demangled with |
| call to fprintf_symbol_filtered. |
| * ch-valprint.c (demangle.h): Include. |
| * ch-valprint.c (chill_print_value_fields): Replace call to |
| fprint_symbol with call to new fprintf_symbol_filtered. |
| |
| Wed Mar 10 17:37:11 1993 Fred Fish (fnf@cygnus.com) |
| |
| * Makefile.in (VERSION): Bump version to 4.8.2. |
| |
| * main.c (source_command): Require an explicit pathname of file |
| to source, since previous behavior of defaulting to gdb init file |
| was troublesome and undocumented. |
| * printcmd.c (disassemble_command): Add missing '{}' pair to |
| else with two statements. Bug reported by Stephane Tsacas |
| <slt@isoft.fr>. |
| * symtab.c (find_pc_line): Don't complain about zero length or |
| negative length line numbers for the moment, since we may not own |
| the terminal when called, such as when single stepping. (FIXME) |
| * language.h (CAST_IS_CONVERSION): True if current language is |
| C++ as well as C. Fix from Peter Schauer. |
| * environ.c (get_in_environ, set_in_environ, unset_in_environ): |
| Use STREQN macro rather than bare '!strncmp()'. |
| * environ.c (unset_in_environ): Avoid use of memcpy on |
| overlapping memory regions, as suggested by Paul Eggert |
| <eggert@twinsun.com>. |
| * c-exp.y (%union struct): Remove unused ulval as suggested |
| by Paul Eggert <eggert@twinsun.com>. |
| |
| Mon Mar 8 19:03:06 1993 Fred Fish (fnf@cygnus.com) |
| |
| * main.c (gdbinit): Make static. |
| * main.c (inhibit_gdbinit): Move to file scope. |
| * main.c (main): Remove local inhibit_gdbinit. |
| * main.c (source_command): Don't source '.gdbinit' file by |
| default if gdb has been told to ignore it. |
| |
| Sun Mar 7 21:58:53 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * Makefile.in (MAKEOVERRIDES): Define to be empty for GNU Make |
| 3.63. |
| |
| Fri Mar 5 17:39:45 1993 John Gilmore (gnu@cacophony.cygnus.com) |
| |
| * printcmd.c (print_address_symbolic): Only print if offset |
| is shorter than max_symbolic_offset. |
| (initialize_printcmd): `set print max-symbolic-offset'. |
| |
| * am29k-tdep.c (TAGWORD_ZERO_MASK): New #define. |
| (examine_tag): Use it. |
| (read_register_stack): Only look in the local registers for a |
| memory address if it's between rfb and rsp; go to memory otherwise. |
| (initialize_29k): Fix call_scratch_address doc. Remove reginv_com. |
| (reginv_com): Remove ancient kludge command. |
| |
| Fri Mar 5 17:16:26 1993 K. Richard Pixley (rich@rtl.cygnus.com) |
| |
| * tm-irix3.h (ZERO_REGNUM): copy this macro from tm-mips.h so that |
| irix4 will again compile. |
| |
| * tm-mips.h (GDB_TARGET_IS_MIPS): no longer used, now removed. |
| |
| * configure.in: accept mips-sgi-irix4* for irix4. |
| |
| Fri Mar 5 07:49:48 1993 Steve Chamberlain (sac@lisa.cygnus.com) |
| |
| * z8k-tdep.c (print_register_hook): Lint. |
| |
| Thu Mar 4 17:42:03 1993 John Gilmore (gnu@cygnus.com) |
| |
| Lint fixes from Paul Eggert (eggert@twinsun.com): |
| |
| * command.c (do_setshow_command): var_uintegers are unsigned. |
| * sparc-tdep.c (save_insn_opcodes, restore_insn_opcodes): |
| unsigned, since they use hex values with the high bit set. |
| |
| Thu Mar 4 08:22:55 1993 Fred Fish (fnf@cygnus.com) |
| |
| Fixes submitted by Karl Berry (karl@nermal.hq.ileaf.com): |
| * m88k-pinsn.c (sprint_address): Use SYMBOL_NAME macro to |
| access symbol name. |
| * m88k-nat-c (SXIP_OFFSET, SNIP_OFFSET, SFIP_OFFSET): Enclose |
| macro definitions in parenthesis. |
| |
| * dbxread.c (dbx_symfile_init): Catch the case where there is |
| no string table, but the only way we find out is by reading zero |
| bytes from EOF. |
| |
| Wed Mar 3 15:51:28 1993 Fred Fish (fnf@cygnus.com) |
| |
| * dbxread.c (dbx_symfile_init): Make size of the string table |
| size field a define (DBX_STRINGTAB_SIZE_SIZE). Ensure that the |
| offset to the string table is nonzero and handle the nonexistant |
| string table case, should it occur. Ensure that the string table |
| size read from the file is reasonable, with a minimum lower bound |
| of DBX_STRINGTAB_SIZE_SIZE instead of zero. |
| |
| Wed Mar 3 07:23:03 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * Makefile.in: Changes to build testsuite correctly. |
| (FLAGS_TO_PASS): Added CXX and CXXFLAGS. |
| (CC_FOR_TARGET, CXX, CXX_FOR_TARGET): New variables. |
| (TARGET_FLAGS_TO_PASS): New variable. |
| (SUBDIRS): Added testsuite. |
| (all): Build testsuite using TARGET_FLAGS_TO_PASS, so that |
| testsuite is compiled with CC_FOR_TARGET rather than CC. |
| |
| Tue Mar 2 17:57:56 1993 Fred Fish (fnf@cygnus.com) |
| |
| * dbxread.c (dbx_symfile_init): Fix for nonexistant string table, |
| reported by mycroft@gnu.ai.mit.edu. |
| |
| (Ultrix 2.2 support from Michael Rendell <michael@mercury.cs.mun.ca>) |
| * configure.in (vax-*-ultrix2*): New triplet. |
| * config/vaxult2.mh: New file. |
| * xm-vaxult2.h: New file. |
| |
| * c-exp.y (parse_number): Change high_bit to unsigned. |
| * demangle.c: Change all references to cfront to ARM, since the |
| actual algorithm is the one specified in the Annotated Reference |
| Manual. This was confusing users into thinking that full cfront |
| support was implemented. |
| * dwarfread.c (CFRONT_PRODUCER): Remove, was never really used. |
| * eval.c (evaluate_subexp): For STRUCTOP_PTR pass the arg type |
| directly to lookup_struct_elt_type, which will do the |
| dereferencing itself. |
| * gdbtypes.c (lookup_struct_elt_type): Expand comments. Fix |
| NULL dereferencing bug for unnamed structs, comment out |
| questionable code. |
| |
| Mon Mar 1 17:54:41 1993 John Gilmore (gnu@cygnus.com) |
| |
| * coffread.c (process_coff_symbol): Change PCC argument correction |
| so that it only happens on big-endian targets; so that it only |
| happens if the short or char argument is aligned on an int |
| boundary; and so that it changes the location, rather than the |
| type, of the argument. These changes tend to parallel similar |
| (old) changes in stabsread.c. |
| |
| * coffread.c (coff_read_enum_type): Use the specified size for |
| enums, don't assume that they are int-sized. |
| |
| * c-valprint.c (c_val_print): Don't assume enums are the same as |
| ints. |
| |
| * coredep.c: Handle NO_PTRACE_H in coredep.c. Fix by Michael |
| Rendell, <michael@mercury.cs.mun.ca>. |
| |
| Mon Mar 1 09:25:57 1993 Fred Fish (fnf@cygnus.com) |
| |
| * language.h (local_decimal_format_custom): Add prototype. |
| * language.c (local_decimal_format_custom): Add function, bug |
| reported by Robert R. Henry (rrh@tera.com). |
| |
| Fri Feb 26 18:33:18 1993 John Gilmore (gnu@cacophony.cygnus.com) |
| |
| * xcoffexec.c (vmap_ldinfo): Fix "/" for '/' typo, reported |
| by Josef Leherbauer, joe@takeFive.co.at. |
| |
| Wed Feb 24 19:17:11 1993 John Gilmore (gnu@cacophony.cygnus.com) |
| |
| * symfile.c (syms_from_objfile), tm-29k.h, tm-3b1.h, tm-68k-un.h, |
| tm-altos.h, tm-arm.h, tm-convex.h, tm-es1800.h, tm-h8300.h, |
| tm-hp300bsd.h, tm-hp300hpux.h, tm-hppa.h, tm-i386bsd.h, |
| tm-i386v.h, tm-i960.h, tm-irix3.h, tm-isi.h, tm-linux.h, |
| tm-m88k.h, tm-merlin.h, tm-mips.h, tm-news.h, tm-np1.h, tm-pn.h, |
| tm-pyr.h, tm-rs6000.h, tm-spc-un.h, tm-sun386.h, tm-sunos.h, |
| tm-symmetry.h, tm-sysv4.h, tm-tahoe.h, tm-umax.h, tm-vax.h, |
| tm-vx68.h, tm-z8k.h: Remove remnants of NAMES_HAVE_UNDERSCORE. |
| |
| Wed Feb 24 07:41:15 1993 Fred Fish (fnf@cygnus.com) |
| |
| * symtab.h (SYMBOL_INIT_DEMANGLED_NAME): Initialize contents |
| of demangled name fields to NULL if no demangling exists for |
| a symbol. SYMBOL_INIT_LANGUAGE_SPECIFIC does this for new |
| symbols if their language is known at the time they are created, |
| but sometimes the language is not known until later. |
| |
| * ch-typeprint.c (chill_print_type_base): Name changed to |
| chill_type_print_base to match pattern for C and C++ names. |
| * ch-typeprint.c (chill_print_type): Change "char" to "CHAR" |
| to be consistent with other usages. |
| * ch-typeprint.c (chill_type_print_base): Add support for |
| printing Chill STRUCT types. |
| * ch-valprint.c: Include values.h. |
| * ch-valprint.c (chill_print_value_fields): New function and |
| prototype for printing Chill STRUCT values. |
| * ch-valprint.c (chill_val_print): Fix call to val_print_string |
| that was being called with two args instead of three. |
| * ch-valprint.c (chill_val_print): Call chill_print_value_fields |
| to print Chill STRUCT values. |
| |
| Tue Feb 23 18:58:11 1993 Mike Werner (mtw@poseidon.cygnus.com) |
| |
| * configure.in: added testsuite to configdirs. |
| |
| Tue Feb 23 11:46:11 1993 Mike Stump (mrs@cygnus.com) |
| |
| * doc/stabs.texi: The `this' pointer is now known by the name |
| `this' instead of `$t'. |
| |
| Tue Feb 23 11:21:33 1993 Fred Fish (fnf@cygnus.com) |
| |
| * dwarfread.c (read_tag_string_type): Rewrite to allow forward |
| references of TAG_string_type DIEs in user defined types. |
| * ch-lang.c (chill_create_fundamental_type): Track compiler |
| change that now emits debugging info with the type long for Chill |
| longs. |
| |
| Mon Feb 22 15:21:54 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * remote-mips.c: New file; implements MIPS remote debugging |
| protocol. |
| * config/idt.mt: New file; uses remote-mips.c |
| * configure.in (mips-idt-ecoff): New target; uses idt.mt. |
| |
| * mips-tdep.c (mips_fpu): New variable; controls use of MIPS |
| floating point coprocessor. |
| (mips_push_dummy_frame): If not mips_fpu, don't save floating |
| point registers. |
| (mips_pop_frame): If not mips_fpu, don't restore floating point |
| registers. |
| (_initialize_mips_tdep): New function; let the user reset mips_fpu |
| variable. |
| * tm-mips.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): If not |
| mips_fpu, don't use fp0 as floating point return register. |
| (FIX_CALL_DUMMY): If not mips_fpu, don't save floating point |
| registers. |
| |
| Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com) |
| |
| * gdb/testsuite: made modifications to testcases, etc., to allow |
| them to work properly given the reorganization of deja-gnu and the |
| relocation of the testcases from deja-gnu to a "tool" subdirectory. |
| |
| Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com) |
| |
| * gdb/testsuite: Initial creation of gdb/testsuite. |
| Migrated dejagnu testcases and support files for testing nm to |
| gdb/testsuite from deja-gnu. These files were moved "as is" |
| with no modifications. This migration is part of a major overhaul |
| of dejagnu. The modifications to these testcases, etc., which |
| will allow them to work with the new version of dejagnu will be |
| made in a future update. |
| |
| Fri Feb 19 18:36:55 1993 John Gilmore (gnu@cygnus.com) |
| |
| * NEWS: Add reminders for next release. |
| |
| Fri Feb 19 10:01:39 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mipsread.c (parse_lines): Correct check for files compiled with |
| -g1. |
| |
| Fri Feb 19 05:56:15 1993 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in (VERSION): 4.8.1 to distinguish local versions. |
| |
| Fri Feb 19 01:32:58 1993 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in (VERSION): GDB-4.8 release! |
| * README, NEWS: Update for release. |
| |
| Thu Feb 18 22:44:40 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * am29k-pinsn.c (print_insn): Minor nits with const. |
| * am29k-tdep.c: More minor nits with arg types for |
| supply_register, NULL vs. 0, read_register_gen, & reginv_com. |
| |
| Thu Feb 18 22:38:03 1993 John Gilmore (gnu@cygnus.com) |
| |
| * gcc.patch: Update for a different GCC (G++) bug. |
| * main.c (print_gdb_version): Update copyright year to 1993. |
| * nm-hp300bsd.h: Decide whether this is BSD 4.3 or 4.4, |
| conditionalize this file on it. FIXME, right way is to split |
| these into two config files. |
| (ATTACH_DETACH): Define for BSD 4.4 |
| (PTRACE_ARG_TYPE): caddr_t for BSD 4.4, unset for 4.3. |
| (U_REGS_OFFSET): Revise for 4.4. |
| (REGISTER_U_ADDR): Separate for 4.4, but it doesn't work yet. |
| * xm-hp300bsd.h: Move definitions of UINT_MAX, INT_MAX, INT_MIN, |
| LONG_MAX into this file to avoid cpp "redefinition" warnings. |
| |
| Thu Feb 18 16:13:28 1993 K. Richard Pixley (rich@rtl.cygnus.com) |
| |
| * nm-hp300bsd.h (PTRACE_ARG3_TYPE): FSF's hp300's have int* not |
| caddr_t. |
| |
| Thu Feb 18 04:10:06 1993 John Gilmore (gnu@cygnus.com) |
| |
| * c-lang.c (c_printstr): Bugfix for length==0 case. |
| |
| * c-lang.c (c_printstr): If a C string ends in a null, don't |
| print the null. |
| |
| Thu Feb 18 02:39:21 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * defs.h (STRCMP): Make it work for unsigned chars. |
| |
| Thu Feb 18 01:56:06 1993 John Gilmore (gnu@cygnus.com) |
| |
| * nm-hp300bsd.h (ATTACH_DETACH, PTRACE_ATTACH, PTRACE_DETACH): define. |
| * config/hp300bsd.mh (REGEX, REGEX1): Define. |
| * m68k-pinsn.c (BREAK_UP_BIG_DECL, AND_OTHER_PART): #if __GNUC__, |
| define to kludge the large opcode table into two smaller tables, |
| since GCC take exponential space to build the table. Lint. |
| (NOPCODES): Remove, use "numopcodes" from opcode/m68k.h instead. |
| |
| Wed Feb 17 19:24:40 1993 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in (VERSION): Roll to 4.7.9. |
| * xm-hp300bsd.h: Define PSIGNAL_IN_SIGNAL_H and put a compatible |
| definition here, to handle both BSD 4.3 and 4.4 systems. |
| * mipsread.c (ZMAGIC): #undef to avoid duplicate define. |
| * remote.c (alarm): Move declaration to global level, before |
| first reference to it. |
| * tm-i386bsd.h (NUM_REGS): There are only eleven, not twelve. |
| * dbxread.c (process_one_symbol): Cast to unsigned char, not int. |
| |
| Wed Feb 17 13:40:29 1993 K. Richard Pixley (rich@cygnus.com) |
| |
| * remote.c (readchar): forward declare alarm which otherwise looks |
| like an undeclared variable to gcc. |
| |
| * dbxread.c (process_one_symbol): cast enum value N_SO into int |
| when comparing against an int. Avoids superfluous warning from |
| vax ultrix 4.2 cc. |
| |
| * inflow.c (set_sigint_trap): add cast to assignment from signal. |
| Avoids superfluous warnings from some systems and/or compilers |
| (like vax ultrix 4.2.) |
| |
| * language.c (struct op_print unk_op_print_tab): use the enum |
| values rather naked zeros as initializers. Avoids warnings from |
| ultrix type compilers. |
| |
| Tue Feb 16 00:53:20 1993 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in (VERSION): Roll to 4.7.6. |
| (SFILES_SUBDIR): Add 29k-share/udi_soc. |
| (SFILES_SUBSUBDIR): Move 29k-share/udi files to this macro. |
| (alldeps.mak): Make ALLDEPFILES_SUBSUBDIR for files in sub sub dirs. |
| (ALLDEPFILES_SUBSUBDIR): Depend on this for deeper dep files. |
| (HFILES): Remove all nm-* except nm-trash.h. Add ns32k-opcode.h. |
| (depend): Fix bug where nm-files in config files weren't noticed. |
| (make-proto-gdb-1): Avoid changing directories while building new |
| prototype. Build SFILES_SUBSUBDIR with longer symlinks. |
| |
| Mon Feb 15 20:48:09 1993 John Gilmore (gnu@cygnus.com) |
| |
| * remote.c: Improve error recovery. Allow user to break out |
| of initial connection attempt with INTERRUPT. Treat a timeout |
| while waiting for remote packet like a retry, unless the remote |
| side is actively running user code. Fix a few long printf_filtered's. |
| |
| * xcoffread.c (read_xcoff_symtab): Don't use null symbol name for |
| trampoline symbols. |
| |
| * buildsym.c (start_subfile): Allow null file name. |
| |
| Fri Feb 12 15:46:49 1993 K. Richard Pixley (rich@cygnus.com) |
| |
| * xcoffread.c (process_xcoff_symbol, read_symbol_lineno): complain |
| expects a pointer to complaint rather than a complaint |
| structure. |
| (process_linenos): free the previously allocated subfile name, |
| then allocate the new one from the heap. |
| |
| Fri Feb 12 08:06:05 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * h8300-tdep.c, tm-h8300.h: turn off some experimental features |
| |
| Thu Feb 11 00:59:07 1993 John Gilmore (gnu@cygnus.com) |
| |
| * stabsread.c (dbx_lookup_type): Handle negative type numbers. |
| Previously, would bogusly index off the bottom of type_vector. |
| (rs6000_builtin_type): Accept type number as argument. |
| (read_type, case '-'): Handle negatives like any other type number. |
| |
| * symfile.c (deduce_language_from_filename): Handle null name. |
| |
| * mips-tdep.c (isa_NAN): Fix byte order dependency. |
| Reported by Nobuyuki Hikichi <hikichi@sra.co.jp>, |
| fixed by sato@sm.sony.co.jp. |
| |
| * xcoffread.c (parmsym): Don't use an initializer to set up |
| this struct symbol. Set it up in initialize_xcoffread. |
| (read_xcoff_symtab, xcoff_symfile_read): Surround code that only |
| works on real rs/6000 target with #ifndef FAKING_RS6000. |
| |
| Wed Feb 10 23:42:37 1993 John Gilmore (gnu@cygnus.com) |
| |
| * stabsread.c (rs6000_builtin_type): Move function from |
| xcoffread.c:builtin_type. |
| * xcoffread.c (builtin_type): Move to stabsread. Remove |
| IBM6000_HOST dependency. Move misplaced comments. |
| (various): Change printf's to complaints. |
| (patch_block_stabs, process_xcoff_symbol case C_DECL): Add |
| objfile argument to read_type calls under #if 0. |
| (process_xcoff_symbol case C_RSYM): Fix typo in #ifdef. |
| * xcoffexec.c (map_vmap): Don't allocate an objfile for the exec_file. |
| * Makefile.in: xcoffread.o is not built by default. |
| * xm-rs6000.h (IBM6000_HOST): Remove. |
| * config/rs6000.mh (NATDEPFILES): xcoffread.o is native only. |
| * doc/gdbint.texinfo: Eliminate IBM6000_HOST, document |
| IBM6000_TARGET. |
| |
| Wed Feb 10 18:31:20 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * findvar.c (read_var_value): If REG_STRUCT_HAS_ADDR, then set |
| VALUE_LVAL to be lval_memory so that we don't try to modify wild |
| register numbers when user tries to modify elements in structs |
| passed as arguments. |
| * inflow.c (child_terminal_info): Move banner outside of system |
| specific #ifdefs. |
| * tm-hppa.h (REG_STRUCT_HAS_ADDR): Define this for HPPA, which |
| passes struct/union arguments by address. |
| |
| Wed Feb 10 15:34:46 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * Based on patch from Kean Johnston <maw@netcom.com>: |
| * nm-i386sco4.h: New file. Like nm-i386sco.h, but define |
| ATTACH_DETACH, PTRACE_ATTACH and PTRACE_DETACH. |
| * config/i386sco4.mh (NAT_FILE): Use nm-i386sco4.h. |
| |
| Tue Feb 9 20:07:18 1993 John Gilmore (gnu@cygnus.com) |
| |
| * remote-udi.c (FREEZE_MODE): Fix && for & typo. Found and |
| fixed by Lynn D. Shumaker, shumaker@saifr00.cfsat.honeywell.com. |
| |
| Tue Feb 9 08:18:07 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * config/i386sco4.mh (MUNCH_DEFINE): Pass -p to nm to avoid bug in |
| cc debugging output. |
| |
| Tue Feb 9 00:19:28 1993 John Gilmore (gnu@cygnus.com) |
| |
| * stabsread.c (define_symbol): Complain about unrecognized names |
| that begin with CPLUS_MARKER (often '$'), but don't die. Fix |
| suggested by gb@cs.purdue.edu (Gerald Baumgartner). |
| (read_cpp_abbrev): Don't use the class name as part of the |
| vtable pointer member name (_vptr$) in $vf abbrevs or unrecognized |
| abbrevs. Inspired by Mike Tiemann. |
| (read_tilde_fields): Comment. Remove ancient dead code. |
| Remove erroneous but non-dead code. Simplify. Add complaints. |
| (in general): Remove extraneous (parentheses) in return |
| statements. |
| |
| Fri Feb 5 14:01:22 1993 John Gilmore (gnu@cygnus.com) |
| |
| * coffread.c (coff_lookup_type): Fix fencepost error reported |
| by Art Berggreen, <arg@opal.acc.com>. |
| |
| Fix long file name bug reported on SCO Open Desktop 2.0 by Ulf Lunde |
| <Ulf.Lunde@kvatro.no> and Dag H. Wanvik <Dag.H.Wanvik@kvatro.no>: |
| |
| * coffread.c (getfilename): Eliminate COFF_NO_LONG_FILE_NAMES |
| test, which is apparently left over from when we used native |
| include files and couldn't depend on the member names being there. |
| * tm-3b1.h, tm-altos.h, tm-i386v.h: Don't set it. |
| |
| Thu Feb 4 12:23:15 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mipsread.c: Major overhaul to use new BFD symbol table reading |
| routines. Now swaps information as it is needed, rather than |
| swapping everything when the file is read. |
| |
| Thu Feb 4 01:52:36 1993 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in (TARDIRS): Add sparclite demo dir. |
| (*.tab.c): Change dependency on Makefile to depend on |
| Makefile.in, otherwise it always rebuilds after configuring. |
| Force output *.tab.c file into current directory even in "make" |
| versions that rewrite dependent file names used in command lines. |
| |
| * TODO: Remove some things we did. |
| * am29k-opcode.h, convx-opcode: Remove; now in ../include/opcode. |
| * os68k-xdep.c: Remove; useless file (os68k is a target only). |
| * convex-pinsn.c: Use ../include/opcode/convex.h. Add CONST. |
| * symtab.h: Eliminate unnamed unions and structs. |
| |
| Wed Feb 3 14:48:08 1993 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in (VERSION): Roll to 4.7.5. |
| |
| Tue Feb 2 20:47:42 1993 John Gilmore (gnu@cygnus.com) |
| |
| * breakpoint.c (breakpoint_re_set_one): Handle watchpoints when |
| re-evaluating symbol pointers. |
| |
| Tue Feb 2 16:10:31 1993 Fred Fish (fnf@cygnus.com) |
| |
| * c-exp.y (lcurly, rcurly): New nonterminals. |
| * c-exp.y (exp): Use lcurly and rcurly for arrays and UNOP_MEMVAL |
| constructs. |
| * parse.c (free_funcalls): Moved prototype from parser-defs.h, |
| made function static. |
| * parse.c (struct funcall): Moved struct def from parser-defs.h. |
| * parse.c (funcall_chain): Moved from parser-defs.h, made static. |
| * parse.c (start_arglist): |
| * parser-defs.h (free_funcalls): Moved prototype to parse.c. |
| * parser-defs.h (struct funcall): Moved struct def to parse.c. |
| * parser-defs.h (funcall_chain): Moved to parse.c. |
| * printcmd.c (print_frame_nameless_args): Fix prototype. |
| * tm-mips.h (setup_arbitrary_frame): Fix prototype. |
| * tm-sparc.h (setup_arbitrary_frame): Fix prototype. |
| * valops.c (typecmp): Moved prototype from values.h. |
| * value.h (typecmp): Moved prototype to valops.c, made static. |
| * ch-exp.y (yylex): Change way control sequences are disabled. |
| |
| Tue Feb 2 16:11:43 1993 John Gilmore (gnu@cygnus.com) |
| |
| * tm-mips.h, tm-sparc.h: Fix thinko in SETUP_ARBITRARY_FRAME. |
| |
| Tue Feb 2 15:30:33 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mipsread.c (upgrade_type): Build array types correctly, using |
| create_range_type and create_array_type. |
| |
| Tue Feb 2 00:19:08 1993 John Gilmore (gnu@cygnus.com) |
| |
| * remote-nindy.c: Cleanup. |
| |
| * infrun.c (wait_for_inferior): When rolling back the PC after |
| a breakpoint, call write_pc so that NPC gets rolled back as well |
| (for the 29K). |
| |
| * blockframe.c (inside_entry_file, inside_main_func, |
| inside_entry_func): PC of zero is always "bottom of stack". |
| |
| * printcmd.c (print_frame_args, print_frame_nameless_args): |
| Let print_frame_nameless_args decide whether there are any, |
| laying groundwork for possibly later printing 29K args for |
| functions where we have tag words but no symbols. |
| |
| Mon Feb 1 18:09:58 1993 Roland H. Pesch (pesch@fowanton.cygnus.com) |
| |
| * Makefile.in: fix GDB doc targets for new doc subdir structure |
| |
| Mon Feb 1 17:56:47 1993 John Gilmore (gnu@cygnus.com) |
| |
| * stack.c (parse_frame_specification): Parse as many arguments |
| as there are (up to MAXARGS). Pass all of them in argc, argv |
| format to SETUP_ARBITRARY_FRAME. Put the burden of checking how |
| many there were, onto SETUP_ARBITRARY_FRAME. |
| * tm-mips.h, tm-sparc.h: Corresponding changes. |
| * mips-tdep.c, sparc-tdep.c: Ditto. |
| |
| Mon Feb 1 17:19:37 1993 John Gilmore (gnu@cygnus.com) |
| |
| * hp300ux-nat.c: Update copyrights. |
| * mipsread.c (parse_partial_symbols): Complain about block |
| indexes that go backwards. Fix from Peter Schauer. |
| * symfile.c (syms_from_objfile, symbol_file_add): Allow a |
| symbol-file that has no linkage symbols to be read. |
| * tm-rs6000.h, xm-rs6000.h: (SIGWINCH_HANDLER and friends): Move |
| from tm- file to xm-file, since they're host dependent. |
| * valarith.c (value_binop): Typo. |
| |
| Mon Feb 1 16:16:59 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * sparclite/aload.c: Add copyleft. |
| * sparclite/crt0.s: Add comment at beginning. |
| |
| Mon Feb 1 14:36:11 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * remote-z8k.c, z8k-tdep.c: support for the Z8001 and Z8002. |
| * parse.c (std_regs): Only declare if NO_STD_REGS is defined. |
| |
| Sun Jan 31 04:32:48 1993 Michael Tiemann (tiemann@rtl.cygnus.com) |
| |
| * values.c (value_headof): Fix typo in which VTBL and ARG were |
| being confused for one another. |
| |
| * valops.c (typecmp): Now static. |
| |
| * gdbtypes.c (fill_in_vptr_fieldno): Don't ignore the first |
| baseclass--we don't always inherit its virtual function table |
| pointer. |
| |
| * eval.c (evaluate_subexp): In OP_FUNCALL case, adjust `this' |
| pointer correctly in case value_struct_elt moves it around. |
| |
| * valops.c (typecmp): Now static. Also, now groks references |
| better. |
| |
| * gdbtypes.c (lookup_struct_elt_type): Pass NOERR instead of |
| zero on recursive call. If NAME is the name of TYPE, return TYPE. |
| |
| Sat Jan 30 19:55:52 1993 John Gilmore (gnu@cygnus.com) |
| |
| * hppah-nat.c: Eliminate <sys/user.h> and other unnecessary stuff, |
| to avoid "too much defining" error from native C compiler (!). |
| |
| * Makefile.in (HFILES): Add typeprint.h. |
| * typeprint.[ch]: Update copyrights. |
| |
| Thu Jan 28 19:09:02 1993 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in: Update to match doc/ subdir changes. |
| |
| * config/hp300hpux.mh: No cross-host file needed, just native. |
| * config/go32.mh: Remove nonexistent "native" support. |
| |
| M88K fixes reported by Carl Greco, <cgreco@Creighton.Edu>: |
| * tm-m88k.h (REGISTER_CONVERT_TO_RAW): Fix typo. |
| * m88k-tdep.c (next_insn): Lint, cleanup. |
| (store_parm_word): Lint. |
| |
| * README: Fix typo (reported by karl@hq.ileaf.com). |
| |
| Wed Jan 27 21:34:21 1993 Fred Fish (fnf@cygnus.com) |
| |
| * expression.h (BINOP_CONCAT): Document use for self concatenation |
| an integral number of times. |
| * language.c (binop_type_check): Extend BINOP_CONCAT for self |
| concatenation case. |
| * valarith.c (value_concat): Rewrite to support self |
| concatenation an integral number of times. |
| * Makefile.in (ch-exp.tab.c): Change "expect" message. |
| * ch-exp.y (FIXME's): Make all FIXME tokens distinct, to |
| eliminate hundreds of spurious shift/reduce and reduce/reduce |
| conflicts that mask the 5 real ones. |
| * ch-exp.y (STRING, CONSTANT, SC): Remove unused tokens. |
| * ch-exp.y (integer_literal_expression): Remove production, |
| no longer used. |
| |
| Thu Jan 21 09:58:36 1993 Fred Fish (fnf@cygnus.com) |
| |
| * eval.c (evaluate_subexp): Fix OP_ARRAY, remove code that |
| implied that "no side effects" was nonfunctional. |
| * eval.c (evaluate_subexp): Add BINOP_CONCAT case to deal with |
| character string and bitstring concatenation. |
| * expprint.c (dump_expression): Add case for BINOP_CONCAT. |
| * expression.h (exp_opcode): Add BINOP_CONCAT. |
| * gdbtypes.h (type_code): Add TYPE_CODE_BITSTRING. |
| * language.c (string_type): Add function to determine if a type |
| is a string type. |
| * language.c (binop_type_check): Add case for BINOP_CONCAT. |
| * valarith.c (value_concat): New function to concatenate two |
| values, such as character strings or bitstrings. |
| * valops.c (value_string): Remove error stub and implement |
| function body. |
| * value.h (value_concat): Add prototype. |
| * ch-exp.y (operand_3): Add actions for SLASH_SLASH (//). |
| * ch-exp.y (yylex): Recognize SLASH_SLASH. |
| * ch-lang.c (chill_op_print_tab): Add SLASH_SLASH (//) as |
| BINOP_CONCAT. |
| |
| Tue Jan 19 14:26:15 1993 Fred Fish (fnf@cygnus.com) |
| |
| * c-exp.y (exp): Add production to support direct creation |
| of array constants using the obvious syntax. |
| * c-valprint.c (c_val_print): Set printed string length. |
| * dwarfread.c (read_tag_string_type): New prototype and |
| function that handles TAG_string_type DIEs. |
| * dwarfread.c (process_dies): Add case for TAG_string_type |
| that calls new read_tag_string_type function. |
| * expprint.c (print_subexp): Add support for OP_ARRAY. |
| * gdbtypes.c (create_range_type, create_array_type): Inherit |
| objfile from the index type. |
| * ch-typeprint.c (chill_print_type): Add case for |
| TYPE_CODE_STRING. |
| * ch-valprint.c (chill_val_print): Fix case for |
| TYPE_CODE_STRING. |
| |
| Mon Jan 18 11:58:45 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mipsread.c (CODE_MASK, MIPS_IS_STAB, MIPS_MARK_STAB, |
| MIPS_UNMARK_STAB, STABS_SYMBOLS): Removed; now in |
| include/coff/mips.h. |
| |
| Fri Jan 15 20:26:50 1993 Fred Fish (fnf@cygnus.com) |
| |
| * c-exp.y (exp:STRING): Convert C strings into array-of-char |
| constants with an explicit null byte terminator. OP_STRING is |
| now used for real string types. |
| * c-lang.c (builtin_type_*): Move declarations to lang.c since |
| they are used by all languages. |
| * c-lang.c (_initialize_c_language): Move initializations of |
| builtin_type_* to lang.c. |
| * c-typeprint.c (c_type_print_varspec_prefix, |
| c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed |
| to TYPE_CODE_STRING. |
| * c-valprint.c (c_val_print): Change the way character arrays |
| are printed as strings to be consistent with the way strings |
| are printed when pointer-to-char types are dereferenced. |
| Remove test of print_max before calling val_print_string, which |
| now does it's own test. |
| * eval.c (evaluate_subexp): Add case for OP_ARRAY. |
| * expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY. |
| * expression.h (enum exp_opcode): Add OP_ARRAY and document. |
| * gdbtypes.c (builtin_type_*): Add declarations moved from |
| c-lang.c. |
| * gdbtypes.c (create_string_type): New function to create real |
| string types. |
| * gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY |
| renamed to TYPE_CODE_STRING. |
| * gdbtypes.c (_initialize_gdbtypes): Add initializations of |
| builtin_type_* types moved from c-lang.c. |
| * gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed |
| to TYPE_CODE_STRING. |
| * gdbtypes.h (builtin_type_string): Add extern declaration. |
| * gdbtypes.h (create_string_type): Add prototype. |
| * m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY |
| renamed to TYPE_CODE_STRING. |
| * m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to |
| TYPE_CODE_STRING. |
| * mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY |
| renamed to TYPE_CODE_STRING. |
| * parse.c (length_of_subexp, prefixify_subexp): Add case for |
| OP_ARRAY. |
| * printcmd.c (print_formatted): Recognize TYPE_CODE_STRING. |
| * typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed |
| to TYPE_CODE_STRING. |
| * valops.c (allocate_space_in_inferior): New function and |
| prototype, using code ripped out of value_string. |
| * valops.c (value_string): Rewritten to use new function |
| allocate_space_in_inferior, but temporarily disabled until some |
| other support is in place. |
| * valops.c (value_array): New function to create array constants. |
| * valprint.c (val_print_string): Add comment to document use, |
| complete rewrite to fix several small buglets. |
| * value.h (value_array): Add prototype. |
| * value.h (val_print_string): Change prototype to match rewrite. |
| * ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING. |
| * ch-exp.y (match_character_literal): Disable recognition of |
| control sequence form of character literals and document why. |
| |
| Thu Jan 14 15:48:12 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * nindy-share/nindy.c: Add comments to #endif's to clarify |
| grouping. |
| |
| * hppa-pinsn.c (print_insn): Use read_memory_integer, instead of |
| read_memory to get byte order right. |
| * hppah-tdep.c (find_unwind_info): Don't read in unwind info |
| anymore. This is done in paread.c now. We expect unwind info |
| to hang off of objfiles, and search all of the objfiles when until |
| we find a match. |
| * (skip_trampoline_code): Cast arg to target_read_memory. |
| * objfiles.h (struct objfile): Add new field obj_private to hold |
| per object file private data (unwind info in this case). |
| * paread.c (read_unwind_info): New routine to read unwind info |
| for the objfile. This data is hung off of obj_private. |
| * tm-hppa.h: Define struct obj_unwind_info, to hold pointers to |
| the unwind info for this objfile. Also define OBJ_UNWIND_INFO to |
| make this easier to access. |
| |
| Wed Jan 13 20:49:59 1993 Fred Fish (fnf@cygnus.com) |
| |
| * c-valprint.c (cp_print_class_member): Add extern decl. |
| * c-valprint.c (c_val_print): Extract code for printing methods |
| and move it to cp_print_class_method in cp-valprint.c. |
| * c-valprint.c (c_val_print): Extract code to print strings and |
| move it to val_print_string in valprint.c. |
| * cp-valprint.c (cp_print_class_method): New function using |
| code extracted from c_val_print. |
| * valprint.c (val_print_string): New function using code |
| extracted from c_val_print. |
| * value.h (val_print_string): Add prototype. |
| * ch-exp.y (CHARACTER_STRING_LITERAL): Set correct token type. |
| * ch-exp.y (literal): Add action for CHARACTER_STRING_LITERAL. |
| * ch-exp.y (tempbuf, tempbufsize, tempbufindex, GROWBY_MIN_SIZE, |
| CHECKBUF, growbuf_by_size): New variables, macros, and support |
| functions for implementing a dynamically expandable temp buffer. |
| * ch-exp.y (match_string_literal): New lexer function. |
| * ch-exp.y (match_bitstring_literal): Dynamic buffer code |
| removed and replaced with new CHECKBUF macro. |
| * ch-exp.y (yylex): Call match_string_literal when appropriate. |
| * ch-valprint.c (ch_val_print): Add code for TYPE_CODE_PTR. |
| |
| Sat Jan 9 19:59:33 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * Makefile.in: Add info for paread.o. |
| * config/hppahpux.mh: Add paread.o to NATDEPFILES. |
| |
| * blockframe.c (frameless_look_for_prologue): Correct the |
| comment. |
| * gdbtypes.h, gdbtypes.c: Use const in decl of |
| cplus_struct_default, now that pa-gas assembler has been fixed. |
| * hppah-nat.c: Formatting. |
| * hppah-tdep.c: Remove lots of useless externs for variables we |
| don't use. |
| * (find_unwind_entry): Speed up by using binary search, and a one |
| entry cache. |
| * (rp_saved): New routine to see what unwind info says about RP |
| being saved on the stack frame. |
| * (frame_saved_pc): Look for prologue to see if we need to |
| examine the stack for the saved RP or not. |
| * (init_extra_frame_info): Check for prologue, instead of |
| framesize to determine if we are frameless or not. |
| * (frame_chain_valid): Stop backtraces when we run into _start. |
| * (push_dummy_frame): Reformat to make more readable. |
| * (find_dummy_frame_regs): ditto. |
| * (hp_pop_frame): ditto. |
| * (hp_restore_pc_queue): small cleanup. |
| * (hp_push_arguments): ditto. |
| * (pa_do_registers_info): ditto. |
| * (skip_prologue): New routine created from SKIP_PROLOGUE macro. |
| * tm-hppa.h: Move contents of SKIP_PROLOGUE into hppah-tdep.c. |
| * Define FRAME_CHAIN_VALID. |
| * Turn on BELIEVE_PCC_PROMOTION so that we can access char args |
| passed to functions. |
| |
| * paread.c (pa_symtab_read): Use new bfd conventions for |
| accessing linker symbol table. |
| * (pa_symfile_init): Access embedded STAB info via BFD section |
| mechanism and related macros. |
| |
| |
| Sat Jan 9 19:31:43 1993 Stu Grossman (grossman at cygnus.com) |
| |
| * sparc-stub.c: Use a seperate stack for our traps. |
| * Handle recursive traps. |
| * Remove all trap init code. This needs to be done by the |
| environment. |
| * (set_mem_fault_trap): Call exceptionHandler() to setup this |
| trap. |
| * (handle_exception): See if we are at breakinst, if so, then |
| advance PC sp that users can just step out of breakpoint(). |
| * (case 'G'): Don't let GDB hack CWP. Also, copy saved regs to |
| new place if SP has changed. |
| * (case 's'): Get rid of this, we can't do it yet. |
| * (case 't'): New command to test any old random feature. |
| * (case 'r'): New command to reset the system. |
| * (breakpoint): Add label to breakpoint trap instruction so that |
| handle_exception() can detect where we are and get past the |
| breakpoint trivially. |
| |
| Thu Jan 7 13:33:06 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mips-pinsn.c: Actual work now done by opcodes/mips-dis.c. |
| |
| Thu Jan 7 09:21:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * configure.in: recognise all sparclite variants |
| |
| Wed Jan 6 10:14:51 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * symfile.c: If O_BINARY isn't defined, set it to 0, call openp for |
| binary files oring in the right bit. |
| |
| * main.c, source.c, state.c, symmisc.c: use macros defined in |
| fopen-{bin|both} when fopening files. |
| |
| Wed Jan 6 08:19:11 1993 Fred Fish (fnf@cygnus.com) |
| |
| * defs.h (HOST_CHAR_BIT): New macro, defaults to either CHAR_BIT |
| from a configuration file (typically including <limits.h>), or to |
| TARGET_CHAR_BIT if CHAR_BIT is not defined. |
| * eval.c (evaluate_subexp): Use new BYTES_TO_EXP_ELEM macro. |
| * eval.c (evaluate_subexp): Add case for OP_BITSTRING. |
| * expprint.c (print_subexp): Use new BYTES_TO_EXP_ELEM macro. |
| * exppritn.c (print_subexp, dump_expression): Add case for |
| OP_BITSTRING. |
| * expression.h (OP_BITSTRING): New expression element type for |
| packed bitstrings. |
| * expression.h (EXP_ELEM_TO_BYTES, BYTES_TO_EXP_ELEM): New |
| macros to convert between number of expression elements and bytes |
| to store that many elements. |
| * i960-tdep.c (leafproc_return): Use new macros to access |
| minimal symbol name and address fields. |
| * m88k-pinsn.c (sprint_address): Use new macros to access |
| minimal symbol name and address fields. |
| * nindy-tdep.c (nindy_frame_chain_valid): Use new macro to access |
| minimal symbol address field. |
| * parse.c (write_exp_elt, write_exp_string, prefixify_expression, |
| parse_exp_1): Use new EXP_ELEM_TO_BYTES macro. |
| * parse.c (write_exp_string, length_of_subexp, prefixify_expression): |
| Use new BYTES_TO_EXP_ELEM macro. |
| * parse.c (write_exp_bitstring): New function to write packed |
| bitstrings into the expression element vector. |
| * parse.c (length_of_subexp, prefixify_subexp): Add case for |
| OP_BITSTRING. |
| * parser-defs.h (struct stoken): Document that it is used for |
| OP_BITSTRING as well as OP_STRING. |
| * parser-defs.h (write_exp_bitstring): Add prototype. |
| * ch-exp.y (BIT_STRING_LITERAL): Change token type to sval. |
| * ch-exp.y (NUM, PRED, SUCC, ABS, CARD, MAX, MIN, SIZE, UPPER, |
| LOWER, LENGTH): New tokens for keywords. |
| * ch-exp.y (chill_value_built_in_routine_call, mode_argument, |
| upper_lower_argument, length_argument, array_mode_name, |
| string_mode_name, variant_structure_mode_name): New non-terminals |
| and productions. |
| * ch-exp.y (literal): Useful production for BIT_STRING_LITERAL. |
| * ch-exp.y (match_bitstring_literal): New lexer support function |
| to recognize bitstring literals. |
| * ch-exp.y (tokentab6): New token table for 6 character keywords. |
| * ch-exp.y (tokentab5): Add LOWER, UPPER. |
| * ch-exp.y (tokentab4): Add PRED, SUCC, CARD, SIZE. |
| * ch-exp.y (tokentab3): Add NUM, ABS, MIN, MAX. |
| * ch-exp.y (yylex): Check tokentab6. |
| * ch-exp.y (yylex): Call match_bitstring_literal. |
| |
| Mon Jan 4 16:54:18 1993 Fred Fish (fnf@cygnus.com) |
| |
| * xcoffexec.c (vmap_symtab): Use new macros to access minimal |
| symbol name and value fields. |
| |
| * c-exp.y (yylex): Make static, to match prototype and other |
| <lang>-exp.y files. |
| |
| * expression.h (exp_opcode): Add BINOP_MOD. |
| * eval.c (evaluate_subexp): Handle new BINOP_MOD. |
| * expprint.c (dump_expression): Handle new BINOP_MOD. |
| * language.c (binop_type_check): Handle new BINOP_MOD. |
| * main.c (float_handler): Re-enable float handler when hit. |
| * valarith.c (language.h): Include, need current_language. |
| * valarith.c (TRUNCATION_TOWARDS_ZERO): Define default macro |
| for integer divide truncates towards zero for negative results. |
| * valarith.c (value_x_binop): Handle BINOP_MOD if seen. |
| * valarith.c (value_binop): Allow arithmetic operations on |
| TYPE_CODE_CHAR variables. Add case to handle new BINOP_MOD. |
| * ch-exp.y (operand_4): Add useful actions for MOD and REM. |
| * ch-exp.y (tokentab3): Add MOD and REM. |
| * ch-exp.y (yylex): Set innermost_block for symbols found |
| in local scopes. Return LOCATION_NAME for local symbols. |
| * ch-lang.c (chill_op_print_tab): Fix MOD entry to use |
| BINOP_MOD instead of BINOP_REM. Add REM entry, using BINOP_REM. |
| |
| Mon Jan 4 07:35:31 1993 Steve Chamberlain (sac@wahini.cygnus.com) |
| |
| * command.c (shell_escape, make_command, _initialize_command): |
| don't create or use fork if CANT_FORK is defined. |
| * serial.h, ser-go32.c: now compiles, but "the obvious problems of |
| code written for the IBM PC" remain. |
| * xm-go32.h: define CANT_FORK |
| |
| Sun Jan 3 14:24:56 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * remote-sim.c: first attempt at general simulator interface |
| * remote-hms.c: whitespace |
| * h8300-tdep.c: (h8300_skip_prologue, examine_prologue): |
| understand new stack layout. (print_register_hook): print ccr |
| register in a fancy way. |
| |
| Sun Jan 3 14:16:10 1993 Fred Fish (fnf@cygnus.com) |
| |
| * eval.c (language.h): Include. |
| * eval.c (evaluate_subexp_with_coercion): Only coerce arrays |
| to pointer types when the current language is C. It loses for |
| other languages when the lower index bound is nonzero. |
| * valarith.c (value_subscript): Take array lower bounds into |
| account when performing subscripting operations. |
| * valops.c (value_coerce_array): Add comment describing why |
| arrays with nonzero lower bounds are dealt with in value_subscript, |
| rather than in value_coerce_array. |
| |
| Sat Jan 2 12:16:41 1993 Fred Fish (fnf@cygnus.com) |
| |
| * ch-exp.y (FLOAT_LITERAL): Add token. |
| * ch-exp.y (literal): Add FLOAT_LITERAL. |
| * ch-exp.y (match_float_literal): New lexer routine. |
| * ch-exp.y (convert_float): Remove. |
| * ch-exp.y (yylex): Call match_float_literal. |
| * ch-exp.y (yylex): Match single '.' after trying |
| to match floating point literals. |
| |
| * eval.c (evaluate_subexp): Add case MULTI_SUBSCRIPT. |
| * expprint.c (print_subexp): Rename BINOP_MULTI_SUBSCRIPT to |
| MULTI_SUBSCRIPT. |
| * expprint.c (dump_expression): New function for dumping |
| expression vectors during gdb debugging. |
| * expression.h (BINOP_MULTI_SUBSCRIPT): Name changed to |
| MULTI_SUBSCRIPT and moved out of BINOP range. |
| * expression.h (DUMP_EXPRESSION): New macro that calls |
| dump_expression if DEBUG_EXPRESSIONS is defined. |
| * m2-exp.y (BINOP_MULTI_SUBSCRIPT): Changed to MULTI_SUBSCRIPT. |
| * parse.c (length_of_subexp, prefixify_subexp): Change |
| BINOP_MULTI_SUBSCRIPT to MULTI_SUBSCRIPT. |
| * parse.c (parse_exp_1): Call DUMP_EXPRESSION before and after |
| prefixify'ing the expression. |
| * printcmd.c (print_command_1): Add comment. |
| * ch-exp.y (expression_list): Add useful actions. |
| * ch-exp.y (value_array_element): Add useful actions. |
| * ch-exp.y (array_primitive_value): Add production. |
| * ch-exp.y (yylex): Recognize ',' as a token. |
| |
| Fri Jan 1 18:22:02 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * Makefile.in: pass prefix and exec_prefix via FLAGS_TO_PASS, |
| POSIXize the recursive makes (make [variable assignments] target{s}) |
| |
| Fri Jan 1 11:56:23 1993 Fred Fish (fnf@cygnus.com) |
| |
| * tm-sun4sol2.h (CPLUS_MARKER): Remove, now set in tm-sysv4.h. |
| * tm-sysv4.h (CPLUS_MARKER): By default, g++ uses '.' as the |
| CPLUS_MARKER for all SVR4 systems, so follow suit. |
| * defs.h (strdup_demangled): Remove prototype. |
| * dwarfread.c (enum_type, synthesize_typedef): Use new macro |
| SYMBOL_INIT_LANGUAGE_SPECIFIC. |
| * dwarfread.c (new_symbol): Use SYMBOL_INIT_DEMANGLED_NAME. |
| * minsyms.c (install_minimal_symbols, prim_record_minimal_symbol, |
| prim_record_minimal_symbol_and_info): Use new macro |
| SYMBOL_INIT_LANGUAGE_SPECIFIC. |
| * minsyms.c (install_minimal_symbols): Use new macro |
| SYMBOL_INIT_DEMANGLED_NAME. |
| * stabsread.c (define_symbol): Use new macro |
| SYMBOL_INIT_DEMANGLED_NAME. |
| * symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): |
| Use new macro SYMBOL_INIT_DEMANGLED_NAME. |
| * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Use new macro |
| SYMBOL_INIT_DEMANGLED_NAME. |
| * symmisc.c (dump_msymbols, dump_symtab, print_partial_symbol): |
| SYMBOL_DEMANGLED_NAME now tests language itself. |
| * symtab.c (COMPLETION_LIST_ADD_SYMBOL): SYMBOL_DEMANGLED_NAME |
| now tests language itself. |
| * symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): New macro that does |
| what SYMBOL_DEMANGLED_NAME used to do, directly access the C++ |
| mangled name member in the language dependent portion of a symbol. |
| * symtab.h (SYMBOL_DEMANGLED_NAME): New macro that returns the |
| mangled name member appropriate for a symbol's language. |
| * symtab.h (SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, |
| SYMBOL_MATCHES_NAME, SYMBOL_MATCHES_REGEXP): |
| SYMBOL_DEMANGLED_NAME now tests language itself. |
| * symtab.h (SYMBOL_INIT_LANGUAGE_SPECIFIC): New macro that |
| initializes language dependent portion of symbol. |
| * symtab.h (SYMBOL_INIT_DEMANGLED_NAME): New macro that |
| demangles and caches the demangled form of symbol names. |
| * utils.c (fputs_demangled, fprint_symbol): Use current language |
| to select an appropriate demangling algorithm. |
| * utils.c (strdup_demangled): Remove, no longer used. |
| * symtab.h (SYMBOL_CHILL_DEMANGLED_NAME): New macro that directly |
| access the Chill mangled name member in the language dependent |
| portion of a symbol. |
| * ch-lang.c (chill_demangle): New function, simple demangler. |
| * defs.h (chill_demangle): Add prototype. |
| * symtab.h (language_dependent_info): Add struct for Chill. |
| |
| For older changes see ChangeLog-1992 |
| |
| Local Variables: |
| mode: indented-text |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |