| ## Process this file with automake to generate Makefile.in |
| # |
| # Copyright (C) 2012-2023 Free Software Foundation, Inc. |
| # |
| # This file is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; see the file COPYING3. If not see |
| # <http://www.gnu.org/licenses/>. |
| # |
| |
| AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects info-in-builddir no-texinfo.tex |
| ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd |
| |
| SUBDIRS = po |
| |
| tooldir = $(exec_prefix)/$(target_alias) |
| |
| MAINTAINERCLEANFILES = |
| |
| ## These aren't set by automake, because they appear in |
| ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and |
| ## thus is not seen by automake. |
| CC_FOR_BUILD = @CC_FOR_BUILD@ |
| EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ |
| |
| YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi` |
| YFLAGS = -d |
| LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi` |
| LEXLIB = @LEXLIB@ |
| |
| # Automake 1.10+ disables lex and yacc output file regeneration if |
| # maintainer mode is disabled. Avoid this. |
| am__skiplex = |
| am__skipyacc = |
| |
| # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is |
| # -I../zlib, unless we were configured with --with-system-zlib, in which |
| # case both are empty. |
| ZLIB = @zlibdir@ -lz |
| ZLIBINC = @zlibinc@ |
| |
| DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@ |
| DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@ |
| |
| WARN_CFLAGS = @WARN_CFLAGS@ |
| WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@ |
| NO_WERROR = @NO_WERROR@ |
| AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC) $(ZSTD_CFLAGS) |
| AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC) $(ZSTD_CFLAGS) |
| LIBICONV = @LIBICONV@ |
| |
| # these two are almost the same program |
| AR_PROG=ar |
| RANLIB_PROG=ranlib |
| |
| # objcopy and strip should be the same program |
| OBJCOPY_PROG=objcopy |
| STRIP_PROG=strip-new |
| |
| STRINGS_PROG=strings |
| |
| READELF_PROG=readelf |
| |
| ELFEDIT_PROG=elfedit |
| |
| # These should all be the same program too. |
| SIZE_PROG=size |
| NM_PROG=nm-new |
| OBJDUMP_PROG=objdump |
| |
| # This is the demangler, as a standalone program. |
| # Note: This one is used as the installed name too, unlike the above. |
| DEMANGLER_PROG=cxxfilt |
| |
| ADDR2LINE_PROG=addr2line |
| |
| DLLTOOL_PROG=dlltool |
| WINDRES_PROG=windres |
| WINDMC_PROG=windmc |
| DLLWRAP_PROG=dllwrap |
| |
| SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) |
| |
| bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ |
| |
| bin_SCRIPTS = @BUILD_INSTALL_MISC@ |
| EXTRA_SCRIPTS = embedspu |
| |
| ## Test programs. |
| BFDTEST1_PROG = bfdtest1 |
| BFDTEST2_PROG = bfdtest2 |
| GENTESTDLLS_PROG = testsuite/gentestdlls |
| |
| TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG) |
| |
| ## We need a special rule to install the programs which are built with |
| ## -new, and to rename cxxfilt to c++filt. |
| RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG) |
| noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@ |
| |
| EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG) |
| |
| # Stuff that goes in tooldir/ if appropriate. |
| TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf |
| |
| BASEDIR = $(srcdir)/.. |
| BFDDIR = $(BASEDIR)/bfd |
| INCDIR = $(BASEDIR)/include |
| |
| AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \ |
| @HDEFINES@ \ |
| @INCINTL@ \ |
| @LARGEFILE_CPPFLAGS@ \ |
| -DLOCALEDIR="\"$(datadir)/locale\"" \ |
| -Dbin_dummy_emulation=$(EMULATION_VECTOR) |
| |
| HFILES = \ |
| arsup.h binemul.h bucomm.h budbg.h \ |
| coffgrok.h debug.h demanguse.h dlltool.h dwarf.h elfcomm.h \ |
| objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \ |
| windmc.h |
| |
| GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h |
| BUILT_SOURCES = $(GENERATED_HFILES) |
| |
| CFILES = \ |
| addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \ |
| coffdump.c coffgrok.c cxxfilt.c \ |
| dwarf.c debug.c demanguse.c dlltool.c dllwrap.c \ |
| elfcomm.c emul_aix.c emul_vanilla.c filemode.c \ |
| is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \ |
| nm.c not-ranlib.c not-strip.c \ |
| objcopy.c objdump.c prdbg.c \ |
| od-elf32_avr.c od-macho.c od-xcoff.c \ |
| rclex.c rdcoff.c rddbg.c readelf.c rename.c \ |
| resbin.c rescoff.c resrc.c resres.c \ |
| size.c srconv.c stabs.c strings.c sysdump.c \ |
| syslex_wrap.c unwind-ia64.c elfedit.c version.c \ |
| windres.c winduni.c wrstabs.c \ |
| windmc.c mclex.c |
| |
| GENERATED_CFILES = \ |
| arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ |
| defparse.c deflex.c rcparse.c mcparse.c |
| |
| DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c |
| WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c |
| |
| # Extra object files for objdump |
| OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@ |
| |
| # Code shared by all the binutils. |
| BULIBS = bucomm.c version.c filemode.c |
| |
| # Code shared by the ELF related programs. |
| ELFLIBS = elfcomm.c |
| |
| BFDLIB = ../bfd/libbfd.la |
| |
| OPCODES = ../opcodes/libopcodes.la |
| |
| if ENABLE_LIBCTF |
| LIBCTF = ../libctf/libctf.la |
| LIBCTF_NOBFD = ../libctf/libctf-nobfd.la |
| else |
| LIBCTF = |
| LIBCTF_NOBFD = |
| endif |
| |
| LIBSFRAME = ../libsframe/libsframe.la |
| |
| LIBIBERTY = ../libiberty/libiberty.a |
| |
| POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES) |
| po/POTFILES.in: @MAINT@ Makefile |
| for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \ |
| && mv tmp $(srcdir)/po/POTFILES.in |
| |
| EXPECT = expect |
| RUNTEST = runtest |
| |
| CC_FOR_TARGET = ` \ |
| if [ -f $$r/../gcc/xgcc ] ; then \ |
| if [ -f $$r/../newlib/Makefile ] ; then \ |
| echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ |
| else \ |
| echo $$r/../gcc/xgcc -B$$r/../gcc/; \ |
| fi; \ |
| else \ |
| if [ "@host@" = "@target@" ] ; then \ |
| echo $(CC); \ |
| else \ |
| echo gcc | sed '$(transform)'; \ |
| fi; \ |
| fi` |
| |
| check-DEJAGNU: site.exp |
| srcdir=`cd $(srcdir) && pwd`; export srcdir; \ |
| r=`pwd`; export r; \ |
| LC_ALL=C; export LC_ALL; \ |
| EXPECT=$(EXPECT); export EXPECT; \ |
| runtest=$(RUNTEST); \ |
| if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ |
| CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \ |
| CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \ |
| $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ |
| $(RUNTESTFLAGS); \ |
| else echo "WARNING: could not find \`runtest'" 1>&2; :;\ |
| fi |
| |
| development.exp: $(BFDDIR)/development.sh |
| $(AM_V_GEN)$(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \ |
| | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@ |
| |
| installcheck-local: |
| /bin/sh $(srcdir)/sanity.sh $(bindir) |
| |
| # There's no global DEPENDENCIES. So, we must explicitly list everything |
| # which depends on libintl, since we don't know whether LIBINTL_DEP will be |
| # non-empty until configure time. Ugh! |
| size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES) $(LIBSFRAME) |
| nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF_NOBFD) $(LIBSFRAME) |
| elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) |
| dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) |
| bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) |
| |
| LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL) |
| |
| size_SOURCES = size.c $(BULIBS) |
| |
| objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) |
| |
| strings_SOURCES = strings.c $(BULIBS) |
| |
| readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c demanguse.c $(ELFLIBS) |
| readelf_LDADD = $(LIBCTF_NOBFD) $(LIBINTL) $(LIBIBERTY) $(ZLIB) $(ZSTD_LIBS) $(DEBUGINFOD_LIBS) $(MSGPACK_LIBS) $(LIBSFRAME) |
| |
| elfedit_SOURCES = elfedit.c version.c $(ELFLIBS) |
| elfedit_LDADD = $(LIBINTL) $(LIBIBERTY) |
| |
| strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) |
| |
| nm_new_SOURCES = nm.c demanguse.c $(BULIBS) |
| |
| objdump_SOURCES = objdump.c dwarf.c prdbg.c demanguse.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS) |
| EXTRA_objdump_SOURCES = od-xcoff.c |
| objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) $(DEBUGINFOD_LIBS) $(LIBSFRAME) |
| |
| objdump.@OBJEXT@:objdump.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c |
| endif |
| |
| cxxfilt_SOURCES = cxxfilt.c $(BULIBS) |
| |
| ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \ |
| emul_$(EMULATION).c $(BULIBS) |
| EXTRA_ar_SOURCES = $(CFILES) |
| ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) |
| |
| ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \ |
| binemul.c emul_$(EMULATION).c $(BULIBS) |
| ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) |
| |
| addr2line_SOURCES = addr2line.c $(BULIBS) |
| |
| # The following is commented out for the conversion to automake. |
| # This rule creates a single binary that switches between ar and ranlib |
| # by looking at argv[0]. Use this kludge to save some disk space. |
| # However, you have to install things by hand. |
| # (That is after 'make install', replace the installed ranlib by a link to ar.) |
| # Alternatively, you can install ranlib.sh as ranlib. |
| # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o |
| # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) |
| # -rm -f $(RANLIB_PROG) |
| # -ln $(AR_PROG) $(RANLIB_PROG) |
| # |
| # objcopy and strip in one binary that uses argv[0] to decide its action. |
| # |
| #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o |
| # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) |
| # -rm -f $(STRIP_PROG) |
| # -ln $(OBJCOPY_PROG) $(STRIP_PROG) |
| |
| sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info |
| $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c |
| $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c |
| $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c |
| |
| sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info |
| $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h |
| |
| sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ |
| $(AM_V_CCLD)$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ |
| |
| syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h |
| $(AM_V_CC)$(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c |
| |
| sysinfo.@OBJEXT@: sysinfo.c |
| $(AM_V_CC)if [ -r sysinfo.c ]; then \ |
| $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \ |
| else \ |
| $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \ |
| fi |
| |
| bin2c$(EXEEXT_FOR_BUILD): bin2c.c |
| $(AM_V_CCLD)$(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c |
| |
| embedspu: embedspu.sh Makefile |
| $(AM_V_GEN)awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@ |
| $(AM_V_at)chmod a+x $@ |
| |
| # We need these for parallel make. |
| sysinfo.h: sysinfo.c |
| |
| # Disable -Werror, if it has been enabled, since old versions of bison/ |
| # yacc will produce working code which contain compile time warnings. |
| arparse.@OBJEXT@: arparse.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) |
| endif |
| |
| arlex.@OBJEXT@: arlex.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) |
| endif |
| |
| dwarf.@OBJEXT@: dwarf.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='dwarf.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c |
| endif |
| |
| readelf.@OBJEXT@: readelf.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(MSGPACK_CFLAGS) -c -o $@ $(srcdir)/readelf.c |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='readelf.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) $(MSGPACK_CFLAGS) -c -o $@ $(srcdir)/readelf.c |
| endif |
| |
| sysroff.@OBJEXT@: sysroff.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) |
| endif |
| |
| defparse.@OBJEXT@: defparse.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) |
| endif |
| |
| deflex.@OBJEXT@: deflex.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) |
| endif |
| |
| rcparse.@OBJEXT@: rcparse.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) |
| endif |
| |
| mcparse.@OBJEXT@: mcparse.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) |
| endif |
| |
| rclex.@OBJEXT@: rclex.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR) |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR) |
| endif |
| |
| mclex.@OBJEXT@: mclex.c |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR) |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR) |
| endif |
| |
| srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) |
| srconv.@OBJEXT@: sysroff.c |
| |
| dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) |
| dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) |
| |
| dlltool.@OBJEXT@: |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c |
| endif |
| |
| rescoff.@OBJEXT@: |
| if am__fastdepCC |
| $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c |
| $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| else |
| if AMDEP |
| source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@ |
| DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| endif |
| $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c |
| endif |
| |
| coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) |
| |
| sysdump_SOURCES = sysdump.c $(BULIBS) |
| sysdump.@OBJEXT@: sysroff.c |
| |
| windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \ |
| winduni.c resres.c $(BULIBS) |
| windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) |
| |
| windmc_SOURCES = windmc.c mcparse.y mclex.c \ |
| winduni.c $(BULIBS) |
| windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) |
| |
| dllwrap_SOURCES = dllwrap.c version.c |
| dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL) |
| |
| |
| EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \ |
| syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \ |
| mcparse.h mcparse.c embedspu.sh |
| |
| diststuff: $(EXTRA_DIST) info |
| all: info |
| |
| # development.sh is used to determine -Werror default. |
| CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh |
| |
| EXTRA_DEJAGNU_SITE_CONFIG = development.exp |
| |
| DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \ |
| site.bak embedspu |
| |
| MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \ |
| binutils.log binutils.sum abcdefgh* |
| mostlyclean-local: |
| -rm -rf tmpdir |
| |
| .PHONY: install-exec-local |
| |
| install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS) |
| @list='$(RENAMED_PROGS)'; for p in $$list; do \ |
| if test -f $$p$(EXEEXT); then \ |
| echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ |
| $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ |
| else :; fi; \ |
| done |
| $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin |
| for i in $(TOOL_PROGS); do \ |
| if [ -f $$i$(EXEEXT) ]; then \ |
| j=`echo $$i | sed -e 's/-new//'`; \ |
| k=`echo $$j | sed '$(transform)'`; \ |
| if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \ |
| rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ |
| ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \ |
| || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ |
| fi; \ |
| else true; \ |
| fi; \ |
| done |
| |
| include doc/local.mk |
