missing - binutils-gdb - Git at Google


            
            #! /bin/sh

            
            # Common stub for a few missing GNU programs while installing.

            
            # Copyright (C) 1996, 1997 Free Software Foundation, Inc.

            
            # Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.


            # This program is free software; you can redistribute it and/or modify

            
            # it under the terms of the GNU General Public License as published by

            
            # the Free Software Foundation; either version 2, or (at your option)

            
            # any later version.


            # This program is distributed in the hope that it will be useful,

            
            # but WITHOUT ANY WARRANTY; without even the implied warranty of

            
            # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

            
            # GNU General Public License for more details.


            # You should have received a copy of the GNU General Public License

            
            # along with this program; if not, write to the Free Software

            
            # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA

            
            # 02111-1307, USA.


            if test $# -eq 0; then

            
              echo 1>&2 "Try \`$0 --help' for more information"

            
              exit 1

            
            fi


            case "$1" in


              -h|--h|--he|--hel|--help)

            
                echo "\

            
            $0 [OPTION]... PROGRAM [ARGUMENT]...


            Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an

            
            error status if there is no known handling for PROGRAM.


            Options:

            
              -h, --help      display this help and exit

            
              -v, --version   output version information and exit


            Supported PROGRAM values:

            
              aclocal      touch file \`aclocal.m4'

            
              autoconf     touch file \`configure'

            
              autoheader   touch file \`config.h.in'

            
              automake     touch all \`Makefile.in' files

            
              bison        create \`y.tab.[ch]', if possible, from existing .[ch]

            
              flex         create \`lex.yy.c', if possible, from existing .c

            
              lex          create \`lex.yy.c', if possible, from existing .c

            
              makeinfo     touch the output file

            
              yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"

            
                ;;


              -v|--v|--ve|--ver|--vers|--versi|--versio|--version)

            
                echo "missing - GNU libit 0.0"

            
                ;;


              -*)

            
                echo 1>&2 "$0: Unknown \`$1' option"

            
                echo 1>&2 "Try \`$0 --help' for more information"

            
                exit 1

            
                ;;


              aclocal)

            
                echo 1>&2 "\

            
            WARNING: \`$1' is missing on your system.  You should only need it if

            
                     you modified \`acinclude.m4' or \`configure.in'.  You might want

            
                     to install the \`Automake' and \`Perl' packages.  Grab them from

            
                     any GNU archive site."

            
                touch aclocal.m4

            
                ;;


              autoconf)

            
                echo 1>&2 "\

            
            WARNING: \`$1' is missing on your system.  You should only need it if

            
                     you modified \`configure.in'.  You might want to install the

            
                     \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU

            
                     archive site."

            
                touch configure

            
                ;;


              autoheader)

            
                echo 1>&2 "\

            
            WARNING: \`$1' is missing on your system.  You should only need it if

            
                     you modified \`acconfig.h' or \`configure.in'.  You might want

            
                     to install the \`Autoconf' and \`GNU m4' packages.  Grab them

            
                     from any GNU archive site."

            
                files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`

            
                test -z "$files" && files="config.h"

            
                touch_files=

            
                for f in $files; do

            
                  case "$f" in

            
                  *:*) touch_files="$touch_files "`echo "$f" |

            
            				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;

            
                  *) touch_files="$touch_files $f.in";;

            
                  esac

            
                done

            
                touch $touch_files

            
                ;;


              automake)

            
                echo 1>&2 "\

            
            WARNING: \`$1' is missing on your system.  You should only need it if

            
                     you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.

            
                     You might want to install the \`Automake' and \`Perl' packages.

            
                     Grab them from any GNU archive site."

            
                find . -type f -name Makefile.am -print |

            
            	   sed 's/\.am$/.in/' |

            
            	   while read f; do touch "$f"; done

            
                ;;


              bison|yacc)

            
                echo 1>&2 "\

            
            WARNING: \`$1' is missing on your system.  You should only need it if

            
                     you modified a \`.y' file.  You may need the \`Bison' package

            
                     in order for those modifications to take effect.  You can get

            
                     \`Bison' from any GNU archive site."

            
                rm -f y.tab.c y.tab.h

            
                if [ $# -ne 1 ]; then

            
                    eval LASTARG="\${$#}"

            
            	case "$LASTARG" in

            
            	*.y)

            
            	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`

            
            	    if [ -f "$SRCFILE" ]; then

            
            	         cp "$SRCFILE" y.tab.c

            
            	    fi

            
            	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`

            
            	    if [ -f "$SRCFILE" ]; then

            
            	         cp "$SRCFILE" y.tab.h

            
            	    fi

            
            	  ;;

            
            	esac

            
                fi

            
                if [ ! -f y.tab.h ]; then

            
            	echo >y.tab.h

            
                fi

            
                if [ ! -f y.tab.c ]; then

            
            	echo 'main() { return 0; }' >y.tab.c

            
                fi

            
                ;;


              lex|flex)

            
                echo 1>&2 "\

            
            WARNING: \`$1' is missing on your system.  You should only need it if

            
                     you modified a \`.l' file.  You may need the \`Flex' package

            
                     in order for those modifications to take effect.  You can get

            
                     \`Flex' from any GNU archive site."

            
                rm -f lex.yy.c

            
                if [ $# -ne 1 ]; then

            
                    eval LASTARG="\${$#}"

            
            	case "$LASTARG" in

            
            	*.l)

            
            	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`

            
            	    if [ -f "$SRCFILE" ]; then

            
            	         cp "$SRCFILE" lex.yy.c

            
            	    fi

            
            	  ;;

            
            	esac

            
                fi

            
                if [ ! -f lex.yy.c ]; then

            
            	echo 'main() { return 0; }' >lex.yy.c

            
                fi

            
                ;;


              makeinfo)

            
                echo 1>&2 "\

            
            WARNING: \`$1' is missing on your system.  You should only need it if

            
                     you modified a \`.texi' or \`.texinfo' file, or any other file

            
                     indirectly affecting the aspect of the manual.  The spurious

            
                     call might also be the consequence of using a buggy \`make' (AIX,

            
                     DU, IRIX).  You might want to install the \`Texinfo' package or

            
                     the \`GNU make' package.  Grab either from any GNU archive site."

            
                file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`

            
                if test -z "$file"; then

            
                  file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`

            
                  file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`

            
                fi

            
                touch $file

            
                ;;


              *)

            
                echo 1>&2 "\

            
            WARNING: \`$1' is needed, and you do not seem to have it handy on your

            
                     system.  You might have modified some files without having the

            
                     proper tools for further handling them.  Check the \`README' file,

            
                     it often tells you about the needed prerequirements for installing

            
                     this package.  You may also peek at any GNU archive site, in case

            
                     some other package would contain this missing \`$1' program."

            
                exit 1

            
                ;;

            
            esac


            exit 0
	#! /bin/sh
	# Common stub for a few missing GNU programs while installing.
	# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
	# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.

	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2, or (at your option)
	# any later version.

	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.

	# You should have received a copy of the GNU General Public License
	# along with this program; if not, write to the Free Software
	# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
	# 02111-1307, USA.

	if test $# -eq 0; then
	echo 1>&2 "Try \`$0 --help' for more information"
	exit 1
	fi

	case "$1" in

	-h\|--h\|--he\|--hel\|--help)
	echo "\
	$0 [OPTION]... PROGRAM [ARGUMENT]...

	Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
	error status if there is no known handling for PROGRAM.

	Options:
	-h, --help display this help and exit
	-v, --version output version information and exit

	Supported PROGRAM values:
	aclocal touch file \`aclocal.m4'
	autoconf touch file \`configure'
	autoheader touch file \`config.h.in'
	automake touch all \`Makefile.in' files
	bison create \`y.tab.[ch]', if possible, from existing .[ch]
	flex create \`lex.yy.c', if possible, from existing .c
	lex create \`lex.yy.c', if possible, from existing .c
	makeinfo touch the output file
	yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
	;;

	-v\|--v\|--ve\|--ver\|--vers\|--versi\|--versio\|--version)
	echo "missing - GNU libit 0.0"
	;;

	-*)
	echo 1>&2 "$0: Unknown \`$1' option"
	echo 1>&2 "Try \`$0 --help' for more information"
	exit 1
	;;

	aclocal)
	echo 1>&2 "\
	WARNING: \`$1' is missing on your system. You should only need it if
	you modified \`acinclude.m4' or \`configure.in'. You might want
	to install the \`Automake' and \`Perl' packages. Grab them from
	any GNU archive site."
	touch aclocal.m4
	;;

	autoconf)
	echo 1>&2 "\
	WARNING: \`$1' is missing on your system. You should only need it if
	you modified \`configure.in'. You might want to install the
	\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
	archive site."
	touch configure
	;;

	autoheader)
	echo 1>&2 "\
	WARNING: \`$1' is missing on your system. You should only need it if
	you modified \`acconfig.h' or \`configure.in'. You might want
	to install the \`Autoconf' and \`GNU m4' packages. Grab them
	from any GNU archive site."
	files=`sed -n 's/^[ ]A[CM]_CONFIG_HEADER(\([^)]\)).*/\1/p' configure.in`
	test -z "$files" && files="config.h"
	touch_files=
	for f in $files; do
	case "$f" in
	:) touch_files="$touch_files "`echo "$f" \|
	sed -e 's/^[^:]://' -e 's/:.//'`;;
	*) touch_files="$touch_files $f.in";;
	esac
	done
	touch $touch_files
	;;

	automake)
	echo 1>&2 "\
	WARNING: \`$1' is missing on your system. You should only need it if
	you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
	You might want to install the \`Automake' and \`Perl' packages.
	Grab them from any GNU archive site."
	find . -type f -name Makefile.am -print \|
	sed 's/\.am$/.in/' \|
	while read f; do touch "$f"; done
	;;

	bison\|yacc)
	echo 1>&2 "\
	WARNING: \`$1' is missing on your system. You should only need it if
	you modified a \`.y' file. You may need the \`Bison' package
	in order for those modifications to take effect. You can get
	\`Bison' from any GNU archive site."
	rm -f y.tab.c y.tab.h
	if [ $# -ne 1 ]; then
	eval LASTARG="\${$#}"
	case "$LASTARG" in
	*.y)
	SRCFILE=`echo "$LASTARG" \| sed 's/y$/c/'`
	if [ -f "$SRCFILE" ]; then
	cp "$SRCFILE" y.tab.c
	fi
	SRCFILE=`echo "$LASTARG" \| sed 's/y$/h/'`
	if [ -f "$SRCFILE" ]; then
	cp "$SRCFILE" y.tab.h
	fi
	;;
	esac
	fi
	if [ ! -f y.tab.h ]; then
	echo >y.tab.h
	fi
	if [ ! -f y.tab.c ]; then
	echo 'main() { return 0; }' >y.tab.c
	fi
	;;

	lex\|flex)
	echo 1>&2 "\
	WARNING: \`$1' is missing on your system. You should only need it if
	you modified a \`.l' file. You may need the \`Flex' package
	in order for those modifications to take effect. You can get
	\`Flex' from any GNU archive site."
	rm -f lex.yy.c
	if [ $# -ne 1 ]; then
	eval LASTARG="\${$#}"
	case "$LASTARG" in
	*.l)
	SRCFILE=`echo "$LASTARG" \| sed 's/l$/c/'`
	if [ -f "$SRCFILE" ]; then
	cp "$SRCFILE" lex.yy.c
	fi
	;;
	esac
	fi
	if [ ! -f lex.yy.c ]; then
	echo 'main() { return 0; }' >lex.yy.c
	fi
	;;

	makeinfo)
	echo 1>&2 "\
	WARNING: \`$1' is missing on your system. You should only need it if
	you modified a \`.texi' or \`.texinfo' file, or any other file
	indirectly affecting the aspect of the manual. The spurious
	call might also be the consequence of using a buggy \`make' (AIX,
	DU, IRIX). You might want to install the \`Texinfo' package or
	the \`GNU make' package. Grab either from any GNU archive site."
	file=`echo "$" \| sed -n 's/.-o \([^ ]\)./\1/p'`
	if test -z "$file"; then
	file=`echo "$" \| sed 's/. \([^ ]\) $/\1/'`
	file=`sed -n '/^@setfilename/ { s/.* \([^ ]\) $/\1/; p; q; }' $file`
	fi
	touch $file
	;;

	*)
	echo 1>&2 "\
	WARNING: \`$1' is needed, and you do not seem to have it handy on your
	system. You might have modified some files without having the
	proper tools for further handling them. Check the \`README' file,
	it often tells you about the needed prerequirements for installing
	this package. You may also peek at any GNU archive site, in case
	some other package would contain this missing \`$1' program."
	exit 1
	;;
	esac

	exit 0