| /* Frame unwinder for frames with DWARF Call Frame Information. | |
| Copyright (C) 2003-2018 Free Software Foundation, Inc. | |
| Contributed by Mark Kettenis. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "defs.h" | |
| #include "dwarf2expr.h" | |
| #include "dwarf2.h" | |
| #include "frame.h" | |
| #include "frame-base.h" | |
| #include "frame-unwind.h" | |
| #include "gdbcore.h" | |
| #include "gdbtypes.h" | |
| #include "symtab.h" | |
| #include "objfiles.h" | |
| #include "regcache.h" | |
| #include "value.h" | |
| #include "record.h" | |
| #include "complaints.h" | |
| #include "dwarf2-frame.h" | |
| #include "ax.h" | |
| #include "dwarf2loc.h" | |
| #include "dwarf2-frame-tailcall.h" | |
| #if GDB_SELF_TEST | |
| #include "selftest.h" | |
| #include "selftest-arch.h" | |
| #endif | |
| struct comp_unit; | |
| /* Call Frame Information (CFI). */ | |
| /* Common Information Entry (CIE). */ | |
| struct dwarf2_cie | |
| { | |
| /* Computation Unit for this CIE. */ | |
| struct comp_unit *unit; | |
| /* Offset into the .debug_frame section where this CIE was found. | |
| Used to identify this CIE. */ | |
| ULONGEST cie_pointer; | |
| /* Constant that is factored out of all advance location | |
| instructions. */ | |
| ULONGEST code_alignment_factor; | |
| /* Constants that is factored out of all offset instructions. */ | |
| LONGEST data_alignment_factor; | |
| /* Return address column. */ | |
| ULONGEST return_address_register; | |
| /* Instruction sequence to initialize a register set. */ | |
| const gdb_byte *initial_instructions; | |
| const gdb_byte *end; | |
| /* Saved augmentation, in case it's needed later. */ | |
| char *augmentation; | |
| /* Encoding of addresses. */ | |
| gdb_byte encoding; | |
| /* Target address size in bytes. */ | |
| int addr_size; | |
| /* Target pointer size in bytes. */ | |
| int ptr_size; | |
| /* True if a 'z' augmentation existed. */ | |
| unsigned char saw_z_augmentation; | |
| /* True if an 'S' augmentation existed. */ | |
| unsigned char signal_frame; | |
| /* The version recorded in the CIE. */ | |
| unsigned char version; | |
| /* The segment size. */ | |
| unsigned char segment_size; | |
| }; | |
| struct dwarf2_cie_table | |
| { | |
| int num_entries; | |
| struct dwarf2_cie **entries; | |
| }; | |
| /* Frame Description Entry (FDE). */ | |
| struct dwarf2_fde | |
| { | |
| /* CIE for this FDE. */ | |
| struct dwarf2_cie *cie; | |
| /* First location associated with this FDE. */ | |
| CORE_ADDR initial_location; | |
| /* Number of bytes of program instructions described by this FDE. */ | |
| CORE_ADDR address_range; | |
| /* Instruction sequence. */ | |
| const gdb_byte *instructions; | |
| const gdb_byte *end; | |
| /* True if this FDE is read from a .eh_frame instead of a .debug_frame | |
| section. */ | |
| unsigned char eh_frame_p; | |
| }; | |
| struct dwarf2_fde_table | |
| { | |
| int num_entries; | |
| struct dwarf2_fde **entries; | |
| }; | |
| /* A minimal decoding of DWARF2 compilation units. We only decode | |
| what's needed to get to the call frame information. */ | |
| struct comp_unit | |
| { | |
| /* Keep the bfd convenient. */ | |
| bfd *abfd; | |
| struct objfile *objfile; | |
| /* Pointer to the .debug_frame section loaded into memory. */ | |
| const gdb_byte *dwarf_frame_buffer; | |
| /* Length of the loaded .debug_frame section. */ | |
| bfd_size_type dwarf_frame_size; | |
| /* Pointer to the .debug_frame section. */ | |
| asection *dwarf_frame_section; | |
| /* Base for DW_EH_PE_datarel encodings. */ | |
| bfd_vma dbase; | |
| /* Base for DW_EH_PE_textrel encodings. */ | |
| bfd_vma tbase; | |
| }; | |
| static struct dwarf2_fde *dwarf2_frame_find_fde (CORE_ADDR *pc, | |
| CORE_ADDR *out_offset); | |
| static int dwarf2_frame_adjust_regnum (struct gdbarch *gdbarch, int regnum, | |
| int eh_frame_p); | |
| static CORE_ADDR read_encoded_value (struct comp_unit *unit, gdb_byte encoding, | |
| int ptr_len, const gdb_byte *buf, | |
| unsigned int *bytes_read_ptr, | |
| CORE_ADDR func_base); | |
| /* Store the length the expression for the CFA in the `cfa_reg' field, | |
| which is unused in that case. */ | |
| #define cfa_exp_len cfa_reg | |
| dwarf2_frame_state::dwarf2_frame_state (CORE_ADDR pc_, struct dwarf2_cie *cie) | |
| : pc (pc_), data_align (cie->data_alignment_factor), | |
| code_align (cie->code_alignment_factor), | |
| retaddr_column (cie->return_address_register) | |
| { | |
| } | |
| /* Helper functions for execute_stack_op. */ | |
| static CORE_ADDR | |
| read_addr_from_reg (struct frame_info *this_frame, int reg) | |
| { | |
| struct gdbarch *gdbarch = get_frame_arch (this_frame); | |
| int regnum = dwarf_reg_to_regnum_or_error (gdbarch, reg); | |
| return address_from_register (regnum, this_frame); | |
| } | |
| /* Execute the required actions for both the DW_CFA_restore and | |
| DW_CFA_restore_extended instructions. */ | |
| static void | |
| dwarf2_restore_rule (struct gdbarch *gdbarch, ULONGEST reg_num, | |
| struct dwarf2_frame_state *fs, int eh_frame_p) | |
| { | |
| ULONGEST reg; | |
| gdb_assert (fs->initial.reg); | |
| reg = dwarf2_frame_adjust_regnum (gdbarch, reg_num, eh_frame_p); | |
| fs->regs.alloc_regs (reg + 1); | |
| /* Check if this register was explicitly initialized in the | |
| CIE initial instructions. If not, default the rule to | |
| UNSPECIFIED. */ | |
| if (reg < fs->initial.num_regs) | |
| fs->regs.reg[reg] = fs->initial.reg[reg]; | |
| else | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_UNSPECIFIED; | |
| if (fs->regs.reg[reg].how == DWARF2_FRAME_REG_UNSPECIFIED) | |
| { | |
| int regnum = dwarf_reg_to_regnum (gdbarch, reg); | |
| complaint (&symfile_complaints, _("\ | |
| incomplete CFI data; DW_CFA_restore unspecified\n\ | |
| register %s (#%d) at %s"), | |
| gdbarch_register_name (gdbarch, regnum), regnum, | |
| paddress (gdbarch, fs->pc)); | |
| } | |
| } | |
| class dwarf_expr_executor : public dwarf_expr_context | |
| { | |
| public: | |
| struct frame_info *this_frame; | |
| CORE_ADDR read_addr_from_reg (int reg) OVERRIDE | |
| { | |
| return ::read_addr_from_reg (this_frame, reg); | |
| } | |
| struct value *get_reg_value (struct type *type, int reg) OVERRIDE | |
| { | |
| struct gdbarch *gdbarch = get_frame_arch (this_frame); | |
| int regnum = dwarf_reg_to_regnum_or_error (gdbarch, reg); | |
| return value_from_register (type, regnum, this_frame); | |
| } | |
| void read_mem (gdb_byte *buf, CORE_ADDR addr, size_t len) OVERRIDE | |
| { | |
| read_memory (addr, buf, len); | |
| } | |
| void get_frame_base (const gdb_byte **start, size_t *length) OVERRIDE | |
| { | |
| invalid ("DW_OP_fbreg"); | |
| } | |
| void push_dwarf_reg_entry_value (enum call_site_parameter_kind kind, | |
| union call_site_parameter_u kind_u, | |
| int deref_size) OVERRIDE | |
| { | |
| invalid ("DW_OP_entry_value"); | |
| } | |
| CORE_ADDR get_object_address () OVERRIDE | |
| { | |
| invalid ("DW_OP_push_object_address"); | |
| } | |
| CORE_ADDR get_frame_cfa () OVERRIDE | |
| { | |
| invalid ("DW_OP_call_frame_cfa"); | |
| } | |
| CORE_ADDR get_tls_address (CORE_ADDR offset) OVERRIDE | |
| { | |
| invalid ("DW_OP_form_tls_address"); | |
| } | |
| void dwarf_call (cu_offset die_offset) OVERRIDE | |
| { | |
| invalid ("DW_OP_call*"); | |
| } | |
| CORE_ADDR get_addr_index (unsigned int index) | |
| { | |
| invalid ("DW_OP_GNU_addr_index"); | |
| } | |
| private: | |
| void invalid (const char *op) ATTRIBUTE_NORETURN | |
| { | |
| error (_("%s is invalid in this context"), op); | |
| } | |
| }; | |
| static CORE_ADDR | |
| execute_stack_op (const gdb_byte *exp, ULONGEST len, int addr_size, | |
| CORE_ADDR offset, struct frame_info *this_frame, | |
| CORE_ADDR initial, int initial_in_stack_memory) | |
| { | |
| CORE_ADDR result; | |
| dwarf_expr_executor ctx; | |
| scoped_value_mark free_values; | |
| ctx.this_frame = this_frame; | |
| ctx.gdbarch = get_frame_arch (this_frame); | |
| ctx.addr_size = addr_size; | |
| ctx.ref_addr_size = -1; | |
| ctx.offset = offset; | |
| ctx.push_address (initial, initial_in_stack_memory); | |
| ctx.eval (exp, len); | |
| if (ctx.location == DWARF_VALUE_MEMORY) | |
| result = ctx.fetch_address (0); | |
| else if (ctx.location == DWARF_VALUE_REGISTER) | |
| result = ctx.read_addr_from_reg (value_as_long (ctx.fetch (0))); | |
| else | |
| { | |
| /* This is actually invalid DWARF, but if we ever do run across | |
| it somehow, we might as well support it. So, instead, report | |
| it as unimplemented. */ | |
| error (_("\ | |
| Not implemented: computing unwound register using explicit value operator")); | |
| } | |
| return result; | |
| } | |
| /* Execute FDE program from INSN_PTR possibly up to INSN_END or up to inferior | |
| PC. Modify FS state accordingly. Return current INSN_PTR where the | |
| execution has stopped, one can resume it on the next call. */ | |
| static const gdb_byte * | |
| execute_cfa_program (struct dwarf2_fde *fde, const gdb_byte *insn_ptr, | |
| const gdb_byte *insn_end, struct gdbarch *gdbarch, | |
| CORE_ADDR pc, struct dwarf2_frame_state *fs) | |
| { | |
| int eh_frame_p = fde->eh_frame_p; | |
| unsigned int bytes_read; | |
| enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); | |
| while (insn_ptr < insn_end && fs->pc <= pc) | |
| { | |
| gdb_byte insn = *insn_ptr++; | |
| uint64_t utmp, reg; | |
| int64_t offset; | |
| if ((insn & 0xc0) == DW_CFA_advance_loc) | |
| fs->pc += (insn & 0x3f) * fs->code_align; | |
| else if ((insn & 0xc0) == DW_CFA_offset) | |
| { | |
| reg = insn & 0x3f; | |
| reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p); | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| offset = utmp * fs->data_align; | |
| fs->regs.alloc_regs (reg + 1); | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET; | |
| fs->regs.reg[reg].loc.offset = offset; | |
| } | |
| else if ((insn & 0xc0) == DW_CFA_restore) | |
| { | |
| reg = insn & 0x3f; | |
| dwarf2_restore_rule (gdbarch, reg, fs, eh_frame_p); | |
| } | |
| else | |
| { | |
| switch (insn) | |
| { | |
| case DW_CFA_set_loc: | |
| fs->pc = read_encoded_value (fde->cie->unit, fde->cie->encoding, | |
| fde->cie->ptr_size, insn_ptr, | |
| &bytes_read, fde->initial_location); | |
| /* Apply the objfile offset for relocatable objects. */ | |
| fs->pc += ANOFFSET (fde->cie->unit->objfile->section_offsets, | |
| SECT_OFF_TEXT (fde->cie->unit->objfile)); | |
| insn_ptr += bytes_read; | |
| break; | |
| case DW_CFA_advance_loc1: | |
| utmp = extract_unsigned_integer (insn_ptr, 1, byte_order); | |
| fs->pc += utmp * fs->code_align; | |
| insn_ptr++; | |
| break; | |
| case DW_CFA_advance_loc2: | |
| utmp = extract_unsigned_integer (insn_ptr, 2, byte_order); | |
| fs->pc += utmp * fs->code_align; | |
| insn_ptr += 2; | |
| break; | |
| case DW_CFA_advance_loc4: | |
| utmp = extract_unsigned_integer (insn_ptr, 4, byte_order); | |
| fs->pc += utmp * fs->code_align; | |
| insn_ptr += 4; | |
| break; | |
| case DW_CFA_offset_extended: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p); | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| offset = utmp * fs->data_align; | |
| fs->regs.alloc_regs (reg + 1); | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET; | |
| fs->regs.reg[reg].loc.offset = offset; | |
| break; | |
| case DW_CFA_restore_extended: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| dwarf2_restore_rule (gdbarch, reg, fs, eh_frame_p); | |
| break; | |
| case DW_CFA_undefined: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p); | |
| fs->regs.alloc_regs (reg + 1); | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_UNDEFINED; | |
| break; | |
| case DW_CFA_same_value: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p); | |
| fs->regs.alloc_regs (reg + 1); | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAME_VALUE; | |
| break; | |
| case DW_CFA_register: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p); | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| utmp = dwarf2_frame_adjust_regnum (gdbarch, utmp, eh_frame_p); | |
| fs->regs.alloc_regs (reg + 1); | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_REG; | |
| fs->regs.reg[reg].loc.reg = utmp; | |
| break; | |
| case DW_CFA_remember_state: | |
| { | |
| struct dwarf2_frame_state_reg_info *new_rs; | |
| new_rs = new dwarf2_frame_state_reg_info (fs->regs); | |
| fs->regs.prev = new_rs; | |
| } | |
| break; | |
| case DW_CFA_restore_state: | |
| { | |
| struct dwarf2_frame_state_reg_info *old_rs = fs->regs.prev; | |
| if (old_rs == NULL) | |
| { | |
| complaint (&symfile_complaints, _("\ | |
| bad CFI data; mismatched DW_CFA_restore_state at %s"), | |
| paddress (gdbarch, fs->pc)); | |
| } | |
| else | |
| fs->regs = std::move (*old_rs); | |
| } | |
| break; | |
| case DW_CFA_def_cfa: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| fs->regs.cfa_reg = reg; | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| if (fs->armcc_cfa_offsets_sf) | |
| utmp *= fs->data_align; | |
| fs->regs.cfa_offset = utmp; | |
| fs->regs.cfa_how = CFA_REG_OFFSET; | |
| break; | |
| case DW_CFA_def_cfa_register: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| fs->regs.cfa_reg = dwarf2_frame_adjust_regnum (gdbarch, reg, | |
| eh_frame_p); | |
| fs->regs.cfa_how = CFA_REG_OFFSET; | |
| break; | |
| case DW_CFA_def_cfa_offset: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| if (fs->armcc_cfa_offsets_sf) | |
| utmp *= fs->data_align; | |
| fs->regs.cfa_offset = utmp; | |
| /* cfa_how deliberately not set. */ | |
| break; | |
| case DW_CFA_nop: | |
| break; | |
| case DW_CFA_def_cfa_expression: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| fs->regs.cfa_exp_len = utmp; | |
| fs->regs.cfa_exp = insn_ptr; | |
| fs->regs.cfa_how = CFA_EXP; | |
| insn_ptr += fs->regs.cfa_exp_len; | |
| break; | |
| case DW_CFA_expression: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p); | |
| fs->regs.alloc_regs (reg + 1); | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| fs->regs.reg[reg].loc.exp.start = insn_ptr; | |
| fs->regs.reg[reg].loc.exp.len = utmp; | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_EXP; | |
| insn_ptr += utmp; | |
| break; | |
| case DW_CFA_offset_extended_sf: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p); | |
| insn_ptr = safe_read_sleb128 (insn_ptr, insn_end, &offset); | |
| offset *= fs->data_align; | |
| fs->regs.alloc_regs (reg + 1); | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET; | |
| fs->regs.reg[reg].loc.offset = offset; | |
| break; | |
| case DW_CFA_val_offset: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| fs->regs.alloc_regs (reg + 1); | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| offset = utmp * fs->data_align; | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_VAL_OFFSET; | |
| fs->regs.reg[reg].loc.offset = offset; | |
| break; | |
| case DW_CFA_val_offset_sf: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| fs->regs.alloc_regs (reg + 1); | |
| insn_ptr = safe_read_sleb128 (insn_ptr, insn_end, &offset); | |
| offset *= fs->data_align; | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_VAL_OFFSET; | |
| fs->regs.reg[reg].loc.offset = offset; | |
| break; | |
| case DW_CFA_val_expression: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| fs->regs.alloc_regs (reg + 1); | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| fs->regs.reg[reg].loc.exp.start = insn_ptr; | |
| fs->regs.reg[reg].loc.exp.len = utmp; | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_VAL_EXP; | |
| insn_ptr += utmp; | |
| break; | |
| case DW_CFA_def_cfa_sf: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| fs->regs.cfa_reg = dwarf2_frame_adjust_regnum (gdbarch, reg, | |
| eh_frame_p); | |
| insn_ptr = safe_read_sleb128 (insn_ptr, insn_end, &offset); | |
| fs->regs.cfa_offset = offset * fs->data_align; | |
| fs->regs.cfa_how = CFA_REG_OFFSET; | |
| break; | |
| case DW_CFA_def_cfa_offset_sf: | |
| insn_ptr = safe_read_sleb128 (insn_ptr, insn_end, &offset); | |
| fs->regs.cfa_offset = offset * fs->data_align; | |
| /* cfa_how deliberately not set. */ | |
| break; | |
| case DW_CFA_GNU_args_size: | |
| /* Ignored. */ | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| break; | |
| case DW_CFA_GNU_negative_offset_extended: | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®); | |
| reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p); | |
| insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp); | |
| offset = utmp * fs->data_align; | |
| fs->regs.alloc_regs (reg + 1); | |
| fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET; | |
| fs->regs.reg[reg].loc.offset = -offset; | |
| break; | |
| default: | |
| if (insn >= DW_CFA_lo_user && insn <= DW_CFA_hi_user) | |
| { | |
| /* Handle vendor-specific CFI for different architectures. */ | |
| if (!gdbarch_execute_dwarf_cfa_vendor_op (gdbarch, insn, fs)) | |
| error (_("Call Frame Instruction op %d in vendor extension " | |
| "space is not handled on this architecture."), | |
| insn); | |
| } | |
| else | |
| internal_error (__FILE__, __LINE__, | |
| _("Unknown CFI encountered.")); | |
| } | |
| } | |
| } | |
| if (fs->initial.reg == NULL) | |
| { | |
| /* Don't allow remember/restore between CIE and FDE programs. */ | |
| delete fs->regs.prev; | |
| fs->regs.prev = NULL; | |
| } | |
| return insn_ptr; | |
| } | |
| #if GDB_SELF_TEST | |
| namespace selftests { | |
| /* Unit test to function execute_cfa_program. */ | |
| static void | |
| execute_cfa_program_test (struct gdbarch *gdbarch) | |
| { | |
| struct dwarf2_fde fde; | |
| struct dwarf2_cie cie; | |
| memset (&fde, 0, sizeof fde); | |
| memset (&cie, 0, sizeof cie); | |
| cie.data_alignment_factor = -4; | |
| cie.code_alignment_factor = 2; | |
| fde.cie = &cie; | |
| dwarf2_frame_state fs (0, fde.cie); | |
| gdb_byte insns[] = | |
| { | |
| DW_CFA_def_cfa, 1, 4, /* DW_CFA_def_cfa: r1 ofs 4 */ | |
| DW_CFA_offset | 0x2, 1, /* DW_CFA_offset: r2 at cfa-4 */ | |
| DW_CFA_remember_state, | |
| DW_CFA_restore_state, | |
| }; | |
| const gdb_byte *insn_end = insns + sizeof (insns); | |
| const gdb_byte *out = execute_cfa_program (&fde, insns, insn_end, gdbarch, | |
| 0, &fs); | |
| SELF_CHECK (out == insn_end); | |
| SELF_CHECK (fs.pc == 0); | |
| /* The instructions above only use r1 and r2, but the register numbers | |
| used are adjusted by dwarf2_frame_adjust_regnum. */ | |
| auto r1 = dwarf2_frame_adjust_regnum (gdbarch, 1, fde.eh_frame_p); | |
| auto r2 = dwarf2_frame_adjust_regnum (gdbarch, 2, fde.eh_frame_p); | |
| SELF_CHECK (fs.regs.num_regs == (std::max (r1, r2) + 1)); | |
| SELF_CHECK (fs.regs.reg[r2].how == DWARF2_FRAME_REG_SAVED_OFFSET); | |
| SELF_CHECK (fs.regs.reg[r2].loc.offset == -4); | |
| for (auto i = 0; i < fs.regs.num_regs; i++) | |
| if (i != r2) | |
| SELF_CHECK (fs.regs.reg[i].how == DWARF2_FRAME_REG_UNSPECIFIED); | |
| SELF_CHECK (fs.regs.cfa_reg == 1); | |
| SELF_CHECK (fs.regs.cfa_offset == 4); | |
| SELF_CHECK (fs.regs.cfa_how == CFA_REG_OFFSET); | |
| SELF_CHECK (fs.regs.cfa_exp == NULL); | |
| SELF_CHECK (fs.regs.prev == NULL); | |
| } | |
| } // namespace selftests | |
| #endif /* GDB_SELF_TEST */ | |
| /* Architecture-specific operations. */ | |
| /* Per-architecture data key. */ | |
| static struct gdbarch_data *dwarf2_frame_data; | |
| struct dwarf2_frame_ops | |
| { | |
| /* Pre-initialize the register state REG for register REGNUM. */ | |
| void (*init_reg) (struct gdbarch *, int, struct dwarf2_frame_state_reg *, | |
| struct frame_info *); | |
| /* Check whether the THIS_FRAME is a signal trampoline. */ | |
| int (*signal_frame_p) (struct gdbarch *, struct frame_info *); | |
| /* Convert .eh_frame register number to DWARF register number, or | |
| adjust .debug_frame register number. */ | |
| int (*adjust_regnum) (struct gdbarch *, int, int); | |
| }; | |
| /* Default architecture-specific register state initialization | |
| function. */ | |
| static void | |
| dwarf2_frame_default_init_reg (struct gdbarch *gdbarch, int regnum, | |
| struct dwarf2_frame_state_reg *reg, | |
| struct frame_info *this_frame) | |
| { | |
| /* If we have a register that acts as a program counter, mark it as | |
| a destination for the return address. If we have a register that | |
| serves as the stack pointer, arrange for it to be filled with the | |
| call frame address (CFA). The other registers are marked as | |
| unspecified. | |
| We copy the return address to the program counter, since many | |
| parts in GDB assume that it is possible to get the return address | |
| by unwinding the program counter register. However, on ISA's | |
| with a dedicated return address register, the CFI usually only | |
| contains information to unwind that return address register. | |
| The reason we're treating the stack pointer special here is | |
| because in many cases GCC doesn't emit CFI for the stack pointer | |
| and implicitly assumes that it is equal to the CFA. This makes | |
| some sense since the DWARF specification (version 3, draft 8, | |
| p. 102) says that: | |
| "Typically, the CFA is defined to be the value of the stack | |
| pointer at the call site in the previous frame (which may be | |
| different from its value on entry to the current frame)." | |
| However, this isn't true for all platforms supported by GCC | |
| (e.g. IBM S/390 and zSeries). Those architectures should provide | |
| their own architecture-specific initialization function. */ | |
| if (regnum == gdbarch_pc_regnum (gdbarch)) | |
| reg->how = DWARF2_FRAME_REG_RA; | |
| else if (regnum == gdbarch_sp_regnum (gdbarch)) | |
| reg->how = DWARF2_FRAME_REG_CFA; | |
| } | |
| /* Return a default for the architecture-specific operations. */ | |
| static void * | |
| dwarf2_frame_init (struct obstack *obstack) | |
| { | |
| struct dwarf2_frame_ops *ops; | |
| ops = OBSTACK_ZALLOC (obstack, struct dwarf2_frame_ops); | |
| ops->init_reg = dwarf2_frame_default_init_reg; | |
| return ops; | |
| } | |
| /* Set the architecture-specific register state initialization | |
| function for GDBARCH to INIT_REG. */ | |
| void | |
| dwarf2_frame_set_init_reg (struct gdbarch *gdbarch, | |
| void (*init_reg) (struct gdbarch *, int, | |
| struct dwarf2_frame_state_reg *, | |
| struct frame_info *)) | |
| { | |
| struct dwarf2_frame_ops *ops | |
| = (struct dwarf2_frame_ops *) gdbarch_data (gdbarch, dwarf2_frame_data); | |
| ops->init_reg = init_reg; | |
| } | |
| /* Pre-initialize the register state REG for register REGNUM. */ | |
| static void | |
| dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum, | |
| struct dwarf2_frame_state_reg *reg, | |
| struct frame_info *this_frame) | |
| { | |
| struct dwarf2_frame_ops *ops | |
| = (struct dwarf2_frame_ops *) gdbarch_data (gdbarch, dwarf2_frame_data); | |
| ops->init_reg (gdbarch, regnum, reg, this_frame); | |
| } | |
| /* Set the architecture-specific signal trampoline recognition | |
| function for GDBARCH to SIGNAL_FRAME_P. */ | |
| void | |
| dwarf2_frame_set_signal_frame_p (struct gdbarch *gdbarch, | |
| int (*signal_frame_p) (struct gdbarch *, | |
| struct frame_info *)) | |
| { | |
| struct dwarf2_frame_ops *ops | |
| = (struct dwarf2_frame_ops *) gdbarch_data (gdbarch, dwarf2_frame_data); | |
| ops->signal_frame_p = signal_frame_p; | |
| } | |
| /* Query the architecture-specific signal frame recognizer for | |
| THIS_FRAME. */ | |
| static int | |
| dwarf2_frame_signal_frame_p (struct gdbarch *gdbarch, | |
| struct frame_info *this_frame) | |
| { | |
| struct dwarf2_frame_ops *ops | |
| = (struct dwarf2_frame_ops *) gdbarch_data (gdbarch, dwarf2_frame_data); | |
| if (ops->signal_frame_p == NULL) | |
| return 0; | |
| return ops->signal_frame_p (gdbarch, this_frame); | |
| } | |
| /* Set the architecture-specific adjustment of .eh_frame and .debug_frame | |
| register numbers. */ | |
| void | |
| dwarf2_frame_set_adjust_regnum (struct gdbarch *gdbarch, | |
| int (*adjust_regnum) (struct gdbarch *, | |
| int, int)) | |
| { | |
| struct dwarf2_frame_ops *ops | |
| = (struct dwarf2_frame_ops *) gdbarch_data (gdbarch, dwarf2_frame_data); | |
| ops->adjust_regnum = adjust_regnum; | |
| } | |
| /* Translate a .eh_frame register to DWARF register, or adjust a .debug_frame | |
| register. */ | |
| static int | |
| dwarf2_frame_adjust_regnum (struct gdbarch *gdbarch, | |
| int regnum, int eh_frame_p) | |
| { | |
| struct dwarf2_frame_ops *ops | |
| = (struct dwarf2_frame_ops *) gdbarch_data (gdbarch, dwarf2_frame_data); | |
| if (ops->adjust_regnum == NULL) | |
| return regnum; | |
| return ops->adjust_regnum (gdbarch, regnum, eh_frame_p); | |
| } | |
| static void | |
| dwarf2_frame_find_quirks (struct dwarf2_frame_state *fs, | |
| struct dwarf2_fde *fde) | |
| { | |
| struct compunit_symtab *cust; | |
| cust = find_pc_compunit_symtab (fs->pc); | |
| if (cust == NULL) | |
| return; | |
| if (producer_is_realview (COMPUNIT_PRODUCER (cust))) | |
| { | |
| if (fde->cie->version == 1) | |
| fs->armcc_cfa_offsets_sf = 1; | |
| if (fde->cie->version == 1) | |
| fs->armcc_cfa_offsets_reversed = 1; | |
| /* The reversed offset problem is present in some compilers | |
| using DWARF3, but it was eventually fixed. Check the ARM | |
| defined augmentations, which are in the format "armcc" followed | |
| by a list of one-character options. The "+" option means | |
| this problem is fixed (no quirk needed). If the armcc | |
| augmentation is missing, the quirk is needed. */ | |
| if (fde->cie->version == 3 | |
| && (!startswith (fde->cie->augmentation, "armcc") | |
| || strchr (fde->cie->augmentation + 5, '+') == NULL)) | |
| fs->armcc_cfa_offsets_reversed = 1; | |
| return; | |
| } | |
| } | |
| /* See dwarf2-frame.h. */ | |
| int | |
| dwarf2_fetch_cfa_info (struct gdbarch *gdbarch, CORE_ADDR pc, | |
| struct dwarf2_per_cu_data *data, | |
| int *regnum_out, LONGEST *offset_out, | |
| CORE_ADDR *text_offset_out, | |
| const gdb_byte **cfa_start_out, | |
| const gdb_byte **cfa_end_out) | |
| { | |
| struct dwarf2_fde *fde; | |
| CORE_ADDR text_offset; | |
| CORE_ADDR pc1 = pc; | |
| /* Find the correct FDE. */ | |
| fde = dwarf2_frame_find_fde (&pc1, &text_offset); | |
| if (fde == NULL) | |
| error (_("Could not compute CFA; needed to translate this expression")); | |
| dwarf2_frame_state fs (pc1, fde->cie); | |
| /* Check for "quirks" - known bugs in producers. */ | |
| dwarf2_frame_find_quirks (&fs, fde); | |
| /* First decode all the insns in the CIE. */ | |
| execute_cfa_program (fde, fde->cie->initial_instructions, | |
| fde->cie->end, gdbarch, pc, &fs); | |
| /* Save the initialized register set. */ | |
| fs.initial = fs.regs; | |
| /* Then decode the insns in the FDE up to our target PC. */ | |
| execute_cfa_program (fde, fde->instructions, fde->end, gdbarch, pc, &fs); | |
| /* Calculate the CFA. */ | |
| switch (fs.regs.cfa_how) | |
| { | |
| case CFA_REG_OFFSET: | |
| { | |
| int regnum = dwarf_reg_to_regnum_or_error (gdbarch, fs.regs.cfa_reg); | |
| *regnum_out = regnum; | |
| if (fs.armcc_cfa_offsets_reversed) | |
| *offset_out = -fs.regs.cfa_offset; | |
| else | |
| *offset_out = fs.regs.cfa_offset; | |
| return 1; | |
| } | |
| case CFA_EXP: | |
| *text_offset_out = text_offset; | |
| *cfa_start_out = fs.regs.cfa_exp; | |
| *cfa_end_out = fs.regs.cfa_exp + fs.regs.cfa_exp_len; | |
| return 0; | |
| default: | |
| internal_error (__FILE__, __LINE__, _("Unknown CFA rule.")); | |
| } | |
| } | |
| struct dwarf2_frame_cache | |
| { | |
| /* DWARF Call Frame Address. */ | |
| CORE_ADDR cfa; | |
| /* Set if the return address column was marked as unavailable | |
| (required non-collected memory or registers to compute). */ | |
| int unavailable_retaddr; | |
| /* Set if the return address column was marked as undefined. */ | |
| int undefined_retaddr; | |
| /* Saved registers, indexed by GDB register number, not by DWARF | |
| register number. */ | |
| struct dwarf2_frame_state_reg *reg; | |
| /* Return address register. */ | |
| struct dwarf2_frame_state_reg retaddr_reg; | |
| /* Target address size in bytes. */ | |
| int addr_size; | |
| /* The .text offset. */ | |
| CORE_ADDR text_offset; | |
| /* True if we already checked whether this frame is the bottom frame | |
| of a virtual tail call frame chain. */ | |
| int checked_tailcall_bottom; | |
| /* If not NULL then this frame is the bottom frame of a TAILCALL_FRAME | |
| sequence. If NULL then it is a normal case with no TAILCALL_FRAME | |
| involved. Non-bottom frames of a virtual tail call frames chain use | |
| dwarf2_tailcall_frame_unwind unwinder so this field does not apply for | |
| them. */ | |
| void *tailcall_cache; | |
| /* The number of bytes to subtract from TAILCALL_FRAME frames frame | |
| base to get the SP, to simulate the return address pushed on the | |
| stack. */ | |
| LONGEST entry_cfa_sp_offset; | |
| int entry_cfa_sp_offset_p; | |
| }; | |
| static struct dwarf2_frame_cache * | |
| dwarf2_frame_cache (struct frame_info *this_frame, void **this_cache) | |
| { | |
| struct gdbarch *gdbarch = get_frame_arch (this_frame); | |
| const int num_regs = gdbarch_num_regs (gdbarch) | |
| + gdbarch_num_pseudo_regs (gdbarch); | |
| struct dwarf2_frame_cache *cache; | |
| struct dwarf2_fde *fde; | |
| CORE_ADDR entry_pc; | |
| const gdb_byte *instr; | |
| if (*this_cache) | |
| return (struct dwarf2_frame_cache *) *this_cache; | |
| /* Allocate a new cache. */ | |
| cache = FRAME_OBSTACK_ZALLOC (struct dwarf2_frame_cache); | |
| cache->reg = FRAME_OBSTACK_CALLOC (num_regs, struct dwarf2_frame_state_reg); | |
| *this_cache = cache; | |
| /* Unwind the PC. | |
| Note that if the next frame is never supposed to return (i.e. a call | |
| to abort), the compiler might optimize away the instruction at | |
| its return address. As a result the return address will | |
| point at some random instruction, and the CFI for that | |
| instruction is probably worthless to us. GCC's unwinder solves | |
| this problem by substracting 1 from the return address to get an | |
| address in the middle of a presumed call instruction (or the | |
| instruction in the associated delay slot). This should only be | |
| done for "normal" frames and not for resume-type frames (signal | |
| handlers, sentinel frames, dummy frames). The function | |
| get_frame_address_in_block does just this. It's not clear how | |
| reliable the method is though; there is the potential for the | |
| register state pre-call being different to that on return. */ | |
| CORE_ADDR pc1 = get_frame_address_in_block (this_frame); | |
| /* Find the correct FDE. */ | |
| fde = dwarf2_frame_find_fde (&pc1, &cache->text_offset); | |
| gdb_assert (fde != NULL); | |
| /* Allocate and initialize the frame state. */ | |
| struct dwarf2_frame_state fs (pc1, fde->cie); | |
| cache->addr_size = fde->cie->addr_size; | |
| /* Check for "quirks" - known bugs in producers. */ | |
| dwarf2_frame_find_quirks (&fs, fde); | |
| /* First decode all the insns in the CIE. */ | |
| execute_cfa_program (fde, fde->cie->initial_instructions, | |
| fde->cie->end, gdbarch, | |
| get_frame_address_in_block (this_frame), &fs); | |
| /* Save the initialized register set. */ | |
| fs.initial = fs.regs; | |
| if (get_frame_func_if_available (this_frame, &entry_pc)) | |
| { | |
| /* Decode the insns in the FDE up to the entry PC. */ | |
| instr = execute_cfa_program (fde, fde->instructions, fde->end, gdbarch, | |
| entry_pc, &fs); | |
| if (fs.regs.cfa_how == CFA_REG_OFFSET | |
| && (dwarf_reg_to_regnum (gdbarch, fs.regs.cfa_reg) | |
| == gdbarch_sp_regnum (gdbarch))) | |
| { | |
| cache->entry_cfa_sp_offset = fs.regs.cfa_offset; | |
| cache->entry_cfa_sp_offset_p = 1; | |
| } | |
| } | |
| else | |
| instr = fde->instructions; | |
| /* Then decode the insns in the FDE up to our target PC. */ | |
| execute_cfa_program (fde, instr, fde->end, gdbarch, | |
| get_frame_address_in_block (this_frame), &fs); | |
| TRY | |
| { | |
| /* Calculate the CFA. */ | |
| switch (fs.regs.cfa_how) | |
| { | |
| case CFA_REG_OFFSET: | |
| cache->cfa = read_addr_from_reg (this_frame, fs.regs.cfa_reg); | |
| if (fs.armcc_cfa_offsets_reversed) | |
| cache->cfa -= fs.regs.cfa_offset; | |
| else | |
| cache->cfa += fs.regs.cfa_offset; | |
| break; | |
| case CFA_EXP: | |
| cache->cfa = | |
| execute_stack_op (fs.regs.cfa_exp, fs.regs.cfa_exp_len, | |
| cache->addr_size, cache->text_offset, | |
| this_frame, 0, 0); | |
| break; | |
| default: | |
| internal_error (__FILE__, __LINE__, _("Unknown CFA rule.")); | |
| } | |
| } | |
| CATCH (ex, RETURN_MASK_ERROR) | |
| { | |
| if (ex.error == NOT_AVAILABLE_ERROR) | |
| { | |
| cache->unavailable_retaddr = 1; | |
| return cache; | |
| } | |
| throw_exception (ex); | |
| } | |
| END_CATCH | |
| /* Initialize the register state. */ | |
| { | |
| int regnum; | |
| for (regnum = 0; regnum < num_regs; regnum++) | |
| dwarf2_frame_init_reg (gdbarch, regnum, &cache->reg[regnum], this_frame); | |
| } | |
| /* Go through the DWARF2 CFI generated table and save its register | |
| location information in the cache. Note that we don't skip the | |
| return address column; it's perfectly all right for it to | |
| correspond to a real register. */ | |
| { | |
| int column; /* CFI speak for "register number". */ | |
| for (column = 0; column < fs.regs.num_regs; column++) | |
| { | |
| /* Use the GDB register number as the destination index. */ | |
| int regnum = dwarf_reg_to_regnum (gdbarch, column); | |
| /* Protect against a target returning a bad register. */ | |
| if (regnum < 0 || regnum >= num_regs) | |
| continue; | |
| /* NOTE: cagney/2003-09-05: CFI should specify the disposition | |
| of all debug info registers. If it doesn't, complain (but | |
| not too loudly). It turns out that GCC assumes that an | |
| unspecified register implies "same value" when CFI (draft | |
| 7) specifies nothing at all. Such a register could equally | |
| be interpreted as "undefined". Also note that this check | |
| isn't sufficient; it only checks that all registers in the | |
| range [0 .. max column] are specified, and won't detect | |
| problems when a debug info register falls outside of the | |
| table. We need a way of iterating through all the valid | |
| DWARF2 register numbers. */ | |
| if (fs.regs.reg[column].how == DWARF2_FRAME_REG_UNSPECIFIED) | |
| { | |
| if (cache->reg[regnum].how == DWARF2_FRAME_REG_UNSPECIFIED) | |
| complaint (&symfile_complaints, _("\ | |
| incomplete CFI data; unspecified registers (e.g., %s) at %s"), | |
| gdbarch_register_name (gdbarch, regnum), | |
| paddress (gdbarch, fs.pc)); | |
| } | |
| else | |
| cache->reg[regnum] = fs.regs.reg[column]; | |
| } | |
| } | |
| /* Eliminate any DWARF2_FRAME_REG_RA rules, and save the information | |
| we need for evaluating DWARF2_FRAME_REG_RA_OFFSET rules. */ | |
| { | |
| int regnum; | |
| for (regnum = 0; regnum < num_regs; regnum++) | |
| { | |
| if (cache->reg[regnum].how == DWARF2_FRAME_REG_RA | |
| || cache->reg[regnum].how == DWARF2_FRAME_REG_RA_OFFSET) | |
| { | |
| struct dwarf2_frame_state_reg *retaddr_reg = | |
| &fs.regs.reg[fs.retaddr_column]; | |
| /* It seems rather bizarre to specify an "empty" column as | |
| the return adress column. However, this is exactly | |
| what GCC does on some targets. It turns out that GCC | |
| assumes that the return address can be found in the | |
| register corresponding to the return address column. | |
| Incidentally, that's how we should treat a return | |
| address column specifying "same value" too. */ | |
| if (fs.retaddr_column < fs.regs.num_regs | |
| && retaddr_reg->how != DWARF2_FRAME_REG_UNSPECIFIED | |
| && retaddr_reg->how != DWARF2_FRAME_REG_SAME_VALUE) | |
| { | |
| if (cache->reg[regnum].how == DWARF2_FRAME_REG_RA) | |
| cache->reg[regnum] = *retaddr_reg; | |
| else | |
| cache->retaddr_reg = *retaddr_reg; | |
| } | |
| else | |
| { | |
| if (cache->reg[regnum].how == DWARF2_FRAME_REG_RA) | |
| { | |
| cache->reg[regnum].loc.reg = fs.retaddr_column; | |
| cache->reg[regnum].how = DWARF2_FRAME_REG_SAVED_REG; | |
| } | |
| else | |
| { | |
| cache->retaddr_reg.loc.reg = fs.retaddr_column; | |
| cache->retaddr_reg.how = DWARF2_FRAME_REG_SAVED_REG; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| if (fs.retaddr_column < fs.regs.num_regs | |
| && fs.regs.reg[fs.retaddr_column].how == DWARF2_FRAME_REG_UNDEFINED) | |
| cache->undefined_retaddr = 1; | |
| return cache; | |
| } | |
| static enum unwind_stop_reason | |
| dwarf2_frame_unwind_stop_reason (struct frame_info *this_frame, | |
| void **this_cache) | |
| { | |
| struct dwarf2_frame_cache *cache | |
| = dwarf2_frame_cache (this_frame, this_cache); | |
| if (cache->unavailable_retaddr) | |
| return UNWIND_UNAVAILABLE; | |
| if (cache->undefined_retaddr) | |
| return UNWIND_OUTERMOST; | |
| return UNWIND_NO_REASON; | |
| } | |
| static void | |
| dwarf2_frame_this_id (struct frame_info *this_frame, void **this_cache, | |
| struct frame_id *this_id) | |
| { | |
| struct dwarf2_frame_cache *cache = | |
| dwarf2_frame_cache (this_frame, this_cache); | |
| if (cache->unavailable_retaddr) | |
| (*this_id) = frame_id_build_unavailable_stack (get_frame_func (this_frame)); | |
| else if (cache->undefined_retaddr) | |
| return; | |
| else | |
| (*this_id) = frame_id_build (cache->cfa, get_frame_func (this_frame)); | |
| } | |
| static struct value * | |
| dwarf2_frame_prev_register (struct frame_info *this_frame, void **this_cache, | |
| int regnum) | |
| { | |
| struct gdbarch *gdbarch = get_frame_arch (this_frame); | |
| struct dwarf2_frame_cache *cache = | |
| dwarf2_frame_cache (this_frame, this_cache); | |
| CORE_ADDR addr; | |
| int realnum; | |
| /* Check whether THIS_FRAME is the bottom frame of a virtual tail | |
| call frame chain. */ | |
| if (!cache->checked_tailcall_bottom) | |
| { | |
| cache->checked_tailcall_bottom = 1; | |
| dwarf2_tailcall_sniffer_first (this_frame, &cache->tailcall_cache, | |
| (cache->entry_cfa_sp_offset_p | |
| ? &cache->entry_cfa_sp_offset : NULL)); | |
| } | |
| /* Non-bottom frames of a virtual tail call frames chain use | |
| dwarf2_tailcall_frame_unwind unwinder so this code does not apply for | |
| them. If dwarf2_tailcall_prev_register_first does not have specific value | |
| unwind the register, tail call frames are assumed to have the register set | |
| of the top caller. */ | |
| if (cache->tailcall_cache) | |
| { | |
| struct value *val; | |
| val = dwarf2_tailcall_prev_register_first (this_frame, | |
| &cache->tailcall_cache, | |
| regnum); | |
| if (val) | |
| return val; | |
| } | |
| switch (cache->reg[regnum].how) | |
| { | |
| case DWARF2_FRAME_REG_UNDEFINED: | |
| /* If CFI explicitly specified that the value isn't defined, | |
| mark it as optimized away; the value isn't available. */ | |
| return frame_unwind_got_optimized (this_frame, regnum); | |
| case DWARF2_FRAME_REG_SAVED_OFFSET: | |
| addr = cache->cfa + cache->reg[regnum].loc.offset; | |
| return frame_unwind_got_memory (this_frame, regnum, addr); | |
| case DWARF2_FRAME_REG_SAVED_REG: | |
| realnum = dwarf_reg_to_regnum_or_error | |
| (gdbarch, cache->reg[regnum].loc.reg); | |
| return frame_unwind_got_register (this_frame, regnum, realnum); | |
| case DWARF2_FRAME_REG_SAVED_EXP: | |
| addr = execute_stack_op (cache->reg[regnum].loc.exp.start, | |
| cache->reg[regnum].loc.exp.len, | |
| cache->addr_size, cache->text_offset, | |
| this_frame, cache->cfa, 1); | |
| return frame_unwind_got_memory (this_frame, regnum, addr); | |
| case DWARF2_FRAME_REG_SAVED_VAL_OFFSET: | |
| addr = cache->cfa + cache->reg[regnum].loc.offset; | |
| return frame_unwind_got_constant (this_frame, regnum, addr); | |
| case DWARF2_FRAME_REG_SAVED_VAL_EXP: | |
| addr = execute_stack_op (cache->reg[regnum].loc.exp.start, | |
| cache->reg[regnum].loc.exp.len, | |
| cache->addr_size, cache->text_offset, | |
| this_frame, cache->cfa, 1); | |
| return frame_unwind_got_constant (this_frame, regnum, addr); | |
| case DWARF2_FRAME_REG_UNSPECIFIED: | |
| /* GCC, in its infinite wisdom decided to not provide unwind | |
| information for registers that are "same value". Since | |
| DWARF2 (3 draft 7) doesn't define such behavior, said | |
| registers are actually undefined (which is different to CFI | |
| "undefined"). Code above issues a complaint about this. | |
| Here just fudge the books, assume GCC, and that the value is | |
| more inner on the stack. */ | |
| return frame_unwind_got_register (this_frame, regnum, regnum); | |
| case DWARF2_FRAME_REG_SAME_VALUE: | |
| return frame_unwind_got_register (this_frame, regnum, regnum); | |
| case DWARF2_FRAME_REG_CFA: | |
| return frame_unwind_got_address (this_frame, regnum, cache->cfa); | |
| case DWARF2_FRAME_REG_CFA_OFFSET: | |
| addr = cache->cfa + cache->reg[regnum].loc.offset; | |
| return frame_unwind_got_address (this_frame, regnum, addr); | |
| case DWARF2_FRAME_REG_RA_OFFSET: | |
| addr = cache->reg[regnum].loc.offset; | |
| regnum = dwarf_reg_to_regnum_or_error | |
| (gdbarch, cache->retaddr_reg.loc.reg); | |
| addr += get_frame_register_unsigned (this_frame, regnum); | |
| return frame_unwind_got_address (this_frame, regnum, addr); | |
| case DWARF2_FRAME_REG_FN: | |
| return cache->reg[regnum].loc.fn (this_frame, this_cache, regnum); | |
| default: | |
| internal_error (__FILE__, __LINE__, _("Unknown register rule.")); | |
| } | |
| } | |
| /* Proxy for tailcall_frame_dealloc_cache for bottom frame of a virtual tail | |
| call frames chain. */ | |
| static void | |
| dwarf2_frame_dealloc_cache (struct frame_info *self, void *this_cache) | |
| { | |
| struct dwarf2_frame_cache *cache = dwarf2_frame_cache (self, &this_cache); | |
| if (cache->tailcall_cache) | |
| dwarf2_tailcall_frame_unwind.dealloc_cache (self, cache->tailcall_cache); | |
| } | |
| static int | |
| dwarf2_frame_sniffer (const struct frame_unwind *self, | |
| struct frame_info *this_frame, void **this_cache) | |
| { | |
| /* Grab an address that is guarenteed to reside somewhere within the | |
| function. get_frame_pc(), with a no-return next function, can | |
| end up returning something past the end of this function's body. | |
| If the frame we're sniffing for is a signal frame whose start | |
| address is placed on the stack by the OS, its FDE must | |
| extend one byte before its start address or we could potentially | |
| select the FDE of the previous function. */ | |
| CORE_ADDR block_addr = get_frame_address_in_block (this_frame); | |
| struct dwarf2_fde *fde = dwarf2_frame_find_fde (&block_addr, NULL); | |
| if (!fde) | |
| return 0; | |
| /* On some targets, signal trampolines may have unwind information. | |
| We need to recognize them so that we set the frame type | |
| correctly. */ | |
| if (fde->cie->signal_frame | |
| || dwarf2_frame_signal_frame_p (get_frame_arch (this_frame), | |
| this_frame)) | |
| return self->type == SIGTRAMP_FRAME; | |
| if (self->type != NORMAL_FRAME) | |
| return 0; | |
| return 1; | |
| } | |
| static const struct frame_unwind dwarf2_frame_unwind = | |
| { | |
| NORMAL_FRAME, | |
| dwarf2_frame_unwind_stop_reason, | |
| dwarf2_frame_this_id, | |
| dwarf2_frame_prev_register, | |
| NULL, | |
| dwarf2_frame_sniffer, | |
| dwarf2_frame_dealloc_cache | |
| }; | |
| static const struct frame_unwind dwarf2_signal_frame_unwind = | |
| { | |
| SIGTRAMP_FRAME, | |
| dwarf2_frame_unwind_stop_reason, | |
| dwarf2_frame_this_id, | |
| dwarf2_frame_prev_register, | |
| NULL, | |
| dwarf2_frame_sniffer, | |
| /* TAILCALL_CACHE can never be in such frame to need dealloc_cache. */ | |
| NULL | |
| }; | |
| /* Append the DWARF-2 frame unwinders to GDBARCH's list. */ | |
| void | |
| dwarf2_append_unwinders (struct gdbarch *gdbarch) | |
| { | |
| /* TAILCALL_FRAME must be first to find the record by | |
| dwarf2_tailcall_sniffer_first. */ | |
| frame_unwind_append_unwinder (gdbarch, &dwarf2_tailcall_frame_unwind); | |
| frame_unwind_append_unwinder (gdbarch, &dwarf2_frame_unwind); | |
| frame_unwind_append_unwinder (gdbarch, &dwarf2_signal_frame_unwind); | |
| } | |
| /* There is no explicitly defined relationship between the CFA and the | |
| location of frame's local variables and arguments/parameters. | |
| Therefore, frame base methods on this page should probably only be | |
| used as a last resort, just to avoid printing total garbage as a | |
| response to the "info frame" command. */ | |
| static CORE_ADDR | |
| dwarf2_frame_base_address (struct frame_info *this_frame, void **this_cache) | |
| { | |
| struct dwarf2_frame_cache *cache = | |
| dwarf2_frame_cache (this_frame, this_cache); | |
| return cache->cfa; | |
| } | |
| static const struct frame_base dwarf2_frame_base = | |
| { | |
| &dwarf2_frame_unwind, | |
| dwarf2_frame_base_address, | |
| dwarf2_frame_base_address, | |
| dwarf2_frame_base_address | |
| }; | |
| const struct frame_base * | |
| dwarf2_frame_base_sniffer (struct frame_info *this_frame) | |
| { | |
| CORE_ADDR block_addr = get_frame_address_in_block (this_frame); | |
| if (dwarf2_frame_find_fde (&block_addr, NULL)) | |
| return &dwarf2_frame_base; | |
| return NULL; | |
| } | |
| /* Compute the CFA for THIS_FRAME, but only if THIS_FRAME came from | |
| the DWARF unwinder. This is used to implement | |
| DW_OP_call_frame_cfa. */ | |
| CORE_ADDR | |
| dwarf2_frame_cfa (struct frame_info *this_frame) | |
| { | |
| if (frame_unwinder_is (this_frame, &record_btrace_tailcall_frame_unwind) | |
| || frame_unwinder_is (this_frame, &record_btrace_frame_unwind)) | |
| throw_error (NOT_AVAILABLE_ERROR, | |
| _("cfa not available for record btrace target")); | |
| while (get_frame_type (this_frame) == INLINE_FRAME) | |
| this_frame = get_prev_frame (this_frame); | |
| if (get_frame_unwind_stop_reason (this_frame) == UNWIND_UNAVAILABLE) | |
| throw_error (NOT_AVAILABLE_ERROR, | |
| _("can't compute CFA for this frame: " | |
| "required registers or memory are unavailable")); | |
| if (get_frame_id (this_frame).stack_status != FID_STACK_VALID) | |
| throw_error (NOT_AVAILABLE_ERROR, | |
| _("can't compute CFA for this frame: " | |
| "frame base not available")); | |
| return get_frame_base (this_frame); | |
| } | |
| const struct objfile_data *dwarf2_frame_objfile_data; | |
| static unsigned int | |
| read_1_byte (bfd *abfd, const gdb_byte *buf) | |
| { | |
| return bfd_get_8 (abfd, buf); | |
| } | |
| static unsigned int | |
| read_4_bytes (bfd *abfd, const gdb_byte *buf) | |
| { | |
| return bfd_get_32 (abfd, buf); | |
| } | |
| static ULONGEST | |
| read_8_bytes (bfd *abfd, const gdb_byte *buf) | |
| { | |
| return bfd_get_64 (abfd, buf); | |
| } | |
| static ULONGEST | |
| read_initial_length (bfd *abfd, const gdb_byte *buf, | |
| unsigned int *bytes_read_ptr) | |
| { | |
| LONGEST result; | |
| result = bfd_get_32 (abfd, buf); | |
| if (result == 0xffffffff) | |
| { | |
| result = bfd_get_64 (abfd, buf + 4); | |
| *bytes_read_ptr = 12; | |
| } | |
| else | |
| *bytes_read_ptr = 4; | |
| return result; | |
| } | |
| /* Pointer encoding helper functions. */ | |
| /* GCC supports exception handling based on DWARF2 CFI. However, for | |
| technical reasons, it encodes addresses in its FDE's in a different | |
| way. Several "pointer encodings" are supported. The encoding | |
| that's used for a particular FDE is determined by the 'R' | |
| augmentation in the associated CIE. The argument of this | |
| augmentation is a single byte. | |
| The address can be encoded as 2 bytes, 4 bytes, 8 bytes, or as a | |
| LEB128. This is encoded in bits 0, 1 and 2. Bit 3 encodes whether | |
| the address is signed or unsigned. Bits 4, 5 and 6 encode how the | |
| address should be interpreted (absolute, relative to the current | |
| position in the FDE, ...). Bit 7, indicates that the address | |
| should be dereferenced. */ | |
| static gdb_byte | |
| encoding_for_size (unsigned int size) | |
| { | |
| switch (size) | |
| { | |
| case 2: | |
| return DW_EH_PE_udata2; | |
| case 4: | |
| return DW_EH_PE_udata4; | |
| case 8: | |
| return DW_EH_PE_udata8; | |
| default: | |
| internal_error (__FILE__, __LINE__, _("Unsupported address size")); | |
| } | |
| } | |
| static CORE_ADDR | |
| read_encoded_value (struct comp_unit *unit, gdb_byte encoding, | |
| int ptr_len, const gdb_byte *buf, | |
| unsigned int *bytes_read_ptr, | |
| CORE_ADDR func_base) | |
| { | |
| ptrdiff_t offset; | |
| CORE_ADDR base; | |
| /* GCC currently doesn't generate DW_EH_PE_indirect encodings for | |
| FDE's. */ | |
| if (encoding & DW_EH_PE_indirect) | |
| internal_error (__FILE__, __LINE__, | |
| _("Unsupported encoding: DW_EH_PE_indirect")); | |
| *bytes_read_ptr = 0; | |
| switch (encoding & 0x70) | |
| { | |
| case DW_EH_PE_absptr: | |
| base = 0; | |
| break; | |
| case DW_EH_PE_pcrel: | |
| base = bfd_get_section_vma (unit->abfd, unit->dwarf_frame_section); | |
| base += (buf - unit->dwarf_frame_buffer); | |
| break; | |
| case DW_EH_PE_datarel: | |
| base = unit->dbase; | |
| break; | |
| case DW_EH_PE_textrel: | |
| base = unit->tbase; | |
| break; | |
| case DW_EH_PE_funcrel: | |
| base = func_base; | |
| break; | |
| case DW_EH_PE_aligned: | |
| base = 0; | |
| offset = buf - unit->dwarf_frame_buffer; | |
| if ((offset % ptr_len) != 0) | |
| { | |
| *bytes_read_ptr = ptr_len - (offset % ptr_len); | |
| buf += *bytes_read_ptr; | |
| } | |
| break; | |
| default: | |
| internal_error (__FILE__, __LINE__, | |
| _("Invalid or unsupported encoding")); | |
| } | |
| if ((encoding & 0x07) == 0x00) | |
| { | |
| encoding |= encoding_for_size (ptr_len); | |
| if (bfd_get_sign_extend_vma (unit->abfd)) | |
| encoding |= DW_EH_PE_signed; | |
| } | |
| switch (encoding & 0x0f) | |
| { | |
| case DW_EH_PE_uleb128: | |
| { | |
| uint64_t value; | |
| const gdb_byte *end_buf = buf + (sizeof (value) + 1) * 8 / 7; | |
| *bytes_read_ptr += safe_read_uleb128 (buf, end_buf, &value) - buf; | |
| return base + value; | |
| } | |
| case DW_EH_PE_udata2: | |
| *bytes_read_ptr += 2; | |
| return (base + bfd_get_16 (unit->abfd, (bfd_byte *) buf)); | |
| case DW_EH_PE_udata4: | |
| *bytes_read_ptr += 4; | |
| return (base + bfd_get_32 (unit->abfd, (bfd_byte *) buf)); | |
| case DW_EH_PE_udata8: | |
| *bytes_read_ptr += 8; | |
| return (base + bfd_get_64 (unit->abfd, (bfd_byte *) buf)); | |
| case DW_EH_PE_sleb128: | |
| { | |
| int64_t value; | |
| const gdb_byte *end_buf = buf + (sizeof (value) + 1) * 8 / 7; | |
| *bytes_read_ptr += safe_read_sleb128 (buf, end_buf, &value) - buf; | |
| return base + value; | |
| } | |
| case DW_EH_PE_sdata2: | |
| *bytes_read_ptr += 2; | |
| return (base + bfd_get_signed_16 (unit->abfd, (bfd_byte *) buf)); | |
| case DW_EH_PE_sdata4: | |
| *bytes_read_ptr += 4; | |
| return (base + bfd_get_signed_32 (unit->abfd, (bfd_byte *) buf)); | |
| case DW_EH_PE_sdata8: | |
| *bytes_read_ptr += 8; | |
| return (base + bfd_get_signed_64 (unit->abfd, (bfd_byte *) buf)); | |
| default: | |
| internal_error (__FILE__, __LINE__, | |
| _("Invalid or unsupported encoding")); | |
| } | |
| } | |
| static int | |
| bsearch_cie_cmp (const void *key, const void *element) | |
| { | |
| ULONGEST cie_pointer = *(ULONGEST *) key; | |
| struct dwarf2_cie *cie = *(struct dwarf2_cie **) element; | |
| if (cie_pointer == cie->cie_pointer) | |
| return 0; | |
| return (cie_pointer < cie->cie_pointer) ? -1 : 1; | |
| } | |
| /* Find CIE with the given CIE_POINTER in CIE_TABLE. */ | |
| static struct dwarf2_cie * | |
| find_cie (struct dwarf2_cie_table *cie_table, ULONGEST cie_pointer) | |
| { | |
| struct dwarf2_cie **p_cie; | |
| /* The C standard (ISO/IEC 9899:TC2) requires the BASE argument to | |
| bsearch be non-NULL. */ | |
| if (cie_table->entries == NULL) | |
| { | |
| gdb_assert (cie_table->num_entries == 0); | |
| return NULL; | |
| } | |
| p_cie = ((struct dwarf2_cie **) | |
| bsearch (&cie_pointer, cie_table->entries, cie_table->num_entries, | |
| sizeof (cie_table->entries[0]), bsearch_cie_cmp)); | |
| if (p_cie != NULL) | |
| return *p_cie; | |
| return NULL; | |
| } | |
| /* Add a pointer to new CIE to the CIE_TABLE, allocating space for it. */ | |
| static void | |
| add_cie (struct dwarf2_cie_table *cie_table, struct dwarf2_cie *cie) | |
| { | |
| const int n = cie_table->num_entries; | |
| gdb_assert (n < 1 | |
| || cie_table->entries[n - 1]->cie_pointer < cie->cie_pointer); | |
| cie_table->entries | |
| = XRESIZEVEC (struct dwarf2_cie *, cie_table->entries, n + 1); | |
| cie_table->entries[n] = cie; | |
| cie_table->num_entries = n + 1; | |
| } | |
| static int | |
| bsearch_fde_cmp (const void *key, const void *element) | |
| { | |
| CORE_ADDR seek_pc = *(CORE_ADDR *) key; | |
| struct dwarf2_fde *fde = *(struct dwarf2_fde **) element; | |
| if (seek_pc < fde->initial_location) | |
| return -1; | |
| if (seek_pc < fde->initial_location + fde->address_range) | |
| return 0; | |
| return 1; | |
| } | |
| /* Find the FDE for *PC. Return a pointer to the FDE, and store the | |
| inital location associated with it into *PC. */ | |
| static struct dwarf2_fde * | |
| dwarf2_frame_find_fde (CORE_ADDR *pc, CORE_ADDR *out_offset) | |
| { | |
| struct objfile *objfile; | |
| ALL_OBJFILES (objfile) | |
| { | |
| struct dwarf2_fde_table *fde_table; | |
| struct dwarf2_fde **p_fde; | |
| CORE_ADDR offset; | |
| CORE_ADDR seek_pc; | |
| fde_table = ((struct dwarf2_fde_table *) | |
| objfile_data (objfile, dwarf2_frame_objfile_data)); | |
| if (fde_table == NULL) | |
| { | |
| dwarf2_build_frame_info (objfile); | |
| fde_table = ((struct dwarf2_fde_table *) | |
| objfile_data (objfile, dwarf2_frame_objfile_data)); | |
| } | |
| gdb_assert (fde_table != NULL); | |
| if (fde_table->num_entries == 0) | |
| continue; | |
| gdb_assert (objfile->section_offsets); | |
| offset = ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile)); | |
| gdb_assert (fde_table->num_entries > 0); | |
| if (*pc < offset + fde_table->entries[0]->initial_location) | |
| continue; | |
| seek_pc = *pc - offset; | |
| p_fde = ((struct dwarf2_fde **) | |
| bsearch (&seek_pc, fde_table->entries, fde_table->num_entries, | |
| sizeof (fde_table->entries[0]), bsearch_fde_cmp)); | |
| if (p_fde != NULL) | |
| { | |
| *pc = (*p_fde)->initial_location + offset; | |
| if (out_offset) | |
| *out_offset = offset; | |
| return *p_fde; | |
| } | |
| } | |
| return NULL; | |
| } | |
| /* Add a pointer to new FDE to the FDE_TABLE, allocating space for it. */ | |
| static void | |
| add_fde (struct dwarf2_fde_table *fde_table, struct dwarf2_fde *fde) | |
| { | |
| if (fde->address_range == 0) | |
| /* Discard useless FDEs. */ | |
| return; | |
| fde_table->num_entries += 1; | |
| fde_table->entries = XRESIZEVEC (struct dwarf2_fde *, fde_table->entries, | |
| fde_table->num_entries); | |
| fde_table->entries[fde_table->num_entries - 1] = fde; | |
| } | |
| #define DW64_CIE_ID 0xffffffffffffffffULL | |
| /* Defines the type of eh_frames that are expected to be decoded: CIE, FDE | |
| or any of them. */ | |
| enum eh_frame_type | |
| { | |
| EH_CIE_TYPE_ID = 1 << 0, | |
| EH_FDE_TYPE_ID = 1 << 1, | |
| EH_CIE_OR_FDE_TYPE_ID = EH_CIE_TYPE_ID | EH_FDE_TYPE_ID | |
| }; | |
| static const gdb_byte *decode_frame_entry (struct comp_unit *unit, | |
| const gdb_byte *start, | |
| int eh_frame_p, | |
| struct dwarf2_cie_table *cie_table, | |
| struct dwarf2_fde_table *fde_table, | |
| enum eh_frame_type entry_type); | |
| /* Decode the next CIE or FDE, entry_type specifies the expected type. | |
| Return NULL if invalid input, otherwise the next byte to be processed. */ | |
| static const gdb_byte * | |
| decode_frame_entry_1 (struct comp_unit *unit, const gdb_byte *start, | |
| int eh_frame_p, | |
| struct dwarf2_cie_table *cie_table, | |
| struct dwarf2_fde_table *fde_table, | |
| enum eh_frame_type entry_type) | |
| { | |
| struct gdbarch *gdbarch = get_objfile_arch (unit->objfile); | |
| const gdb_byte *buf, *end; | |
| LONGEST length; | |
| unsigned int bytes_read; | |
| int dwarf64_p; | |
| ULONGEST cie_id; | |
| ULONGEST cie_pointer; | |
| int64_t sleb128; | |
| uint64_t uleb128; | |
| buf = start; | |
| length = read_initial_length (unit->abfd, buf, &bytes_read); | |
| buf += bytes_read; | |
| end = buf + length; | |
| /* Are we still within the section? */ | |
| if (end > unit->dwarf_frame_buffer + unit->dwarf_frame_size) | |
| return NULL; | |
| if (length == 0) | |
| return end; | |
| /* Distinguish between 32 and 64-bit encoded frame info. */ | |
| dwarf64_p = (bytes_read == 12); | |
| /* In a .eh_frame section, zero is used to distinguish CIEs from FDEs. */ | |
| if (eh_frame_p) | |
| cie_id = 0; | |
| else if (dwarf64_p) | |
| cie_id = DW64_CIE_ID; | |
| else | |
| cie_id = DW_CIE_ID; | |
| if (dwarf64_p) | |
| { | |
| cie_pointer = read_8_bytes (unit->abfd, buf); | |
| buf += 8; | |
| } | |
| else | |
| { | |
| cie_pointer = read_4_bytes (unit->abfd, buf); | |
| buf += 4; | |
| } | |
| if (cie_pointer == cie_id) | |
| { | |
| /* This is a CIE. */ | |
| struct dwarf2_cie *cie; | |
| char *augmentation; | |
| unsigned int cie_version; | |
| /* Check that a CIE was expected. */ | |
| if ((entry_type & EH_CIE_TYPE_ID) == 0) | |
| error (_("Found a CIE when not expecting it.")); | |
| /* Record the offset into the .debug_frame section of this CIE. */ | |
| cie_pointer = start - unit->dwarf_frame_buffer; | |
| /* Check whether we've already read it. */ | |
| if (find_cie (cie_table, cie_pointer)) | |
| return end; | |
| cie = XOBNEW (&unit->objfile->objfile_obstack, struct dwarf2_cie); | |
| cie->initial_instructions = NULL; | |
| cie->cie_pointer = cie_pointer; | |
| /* The encoding for FDE's in a normal .debug_frame section | |
| depends on the target address size. */ | |
| cie->encoding = DW_EH_PE_absptr; | |
| /* We'll determine the final value later, but we need to | |
| initialize it conservatively. */ | |
| cie->signal_frame = 0; | |
| /* Check version number. */ | |
| cie_version = read_1_byte (unit->abfd, buf); | |
| if (cie_version != 1 && cie_version != 3 && cie_version != 4) | |
| return NULL; | |
| cie->version = cie_version; | |
| buf += 1; | |
| /* Interpret the interesting bits of the augmentation. */ | |
| cie->augmentation = augmentation = (char *) buf; | |
| buf += (strlen (augmentation) + 1); | |
| /* Ignore armcc augmentations. We only use them for quirks, | |
| and that doesn't happen until later. */ | |
| if (startswith (augmentation, "armcc")) | |
| augmentation += strlen (augmentation); | |
| /* The GCC 2.x "eh" augmentation has a pointer immediately | |
| following the augmentation string, so it must be handled | |
| first. */ | |
| if (augmentation[0] == 'e' && augmentation[1] == 'h') | |
| { | |
| /* Skip. */ | |
| buf += gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT; | |
| augmentation += 2; | |
| } | |
| if (cie->version >= 4) | |
| { | |
| /* FIXME: check that this is the same as from the CU header. */ | |
| cie->addr_size = read_1_byte (unit->abfd, buf); | |
| ++buf; | |
| cie->segment_size = read_1_byte (unit->abfd, buf); | |
| ++buf; | |
| } | |
| else | |
| { | |
| cie->addr_size = gdbarch_dwarf2_addr_size (gdbarch); | |
| cie->segment_size = 0; | |
| } | |
| /* Address values in .eh_frame sections are defined to have the | |
| target's pointer size. Watchout: This breaks frame info for | |
| targets with pointer size < address size, unless a .debug_frame | |
| section exists as well. */ | |
| if (eh_frame_p) | |
| cie->ptr_size = gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT; | |
| else | |
| cie->ptr_size = cie->addr_size; | |
| buf = gdb_read_uleb128 (buf, end, &uleb128); | |
| if (buf == NULL) | |
| return NULL; | |
| cie->code_alignment_factor = uleb128; | |
| buf = gdb_read_sleb128 (buf, end, &sleb128); | |
| if (buf == NULL) | |
| return NULL; | |
| cie->data_alignment_factor = sleb128; | |
| if (cie_version == 1) | |
| { | |
| cie->return_address_register = read_1_byte (unit->abfd, buf); | |
| ++buf; | |
| } | |
| else | |
| { | |
| buf = gdb_read_uleb128 (buf, end, &uleb128); | |
| if (buf == NULL) | |
| return NULL; | |
| cie->return_address_register = uleb128; | |
| } | |
| cie->return_address_register | |
| = dwarf2_frame_adjust_regnum (gdbarch, | |
| cie->return_address_register, | |
| eh_frame_p); | |
| cie->saw_z_augmentation = (*augmentation == 'z'); | |
| if (cie->saw_z_augmentation) | |
| { | |
| uint64_t length; | |
| buf = gdb_read_uleb128 (buf, end, &length); | |
| if (buf == NULL) | |
| return NULL; | |
| cie->initial_instructions = buf + length; | |
| augmentation++; | |
| } | |
| while (*augmentation) | |
| { | |
| /* "L" indicates a byte showing how the LSDA pointer is encoded. */ | |
| if (*augmentation == 'L') | |
| { | |
| /* Skip. */ | |
| buf++; | |
| augmentation++; | |
| } | |
| /* "R" indicates a byte indicating how FDE addresses are encoded. */ | |
| else if (*augmentation == 'R') | |
| { | |
| cie->encoding = *buf++; | |
| augmentation++; | |
| } | |
| /* "P" indicates a personality routine in the CIE augmentation. */ | |
| else if (*augmentation == 'P') | |
| { | |
| /* Skip. Avoid indirection since we throw away the result. */ | |
| gdb_byte encoding = (*buf++) & ~DW_EH_PE_indirect; | |
| read_encoded_value (unit, encoding, cie->ptr_size, | |
| buf, &bytes_read, 0); | |
| buf += bytes_read; | |
| augmentation++; | |
| } | |
| /* "S" indicates a signal frame, such that the return | |
| address must not be decremented to locate the call frame | |
| info for the previous frame; it might even be the first | |
| instruction of a function, so decrementing it would take | |
| us to a different function. */ | |
| else if (*augmentation == 'S') | |
| { | |
| cie->signal_frame = 1; | |
| augmentation++; | |
| } | |
| /* Otherwise we have an unknown augmentation. Assume that either | |
| there is no augmentation data, or we saw a 'z' prefix. */ | |
| else | |
| { | |
| if (cie->initial_instructions) | |
| buf = cie->initial_instructions; | |
| break; | |
| } | |
| } | |
| cie->initial_instructions = buf; | |
| cie->end = end; | |
| cie->unit = unit; | |
| add_cie (cie_table, cie); | |
| } | |
| else | |
| { | |
| /* This is a FDE. */ | |
| struct dwarf2_fde *fde; | |
| CORE_ADDR addr; | |
| /* Check that an FDE was expected. */ | |
| if ((entry_type & EH_FDE_TYPE_ID) == 0) | |
| error (_("Found an FDE when not expecting it.")); | |
| /* In an .eh_frame section, the CIE pointer is the delta between the | |
| address within the FDE where the CIE pointer is stored and the | |
| address of the CIE. Convert it to an offset into the .eh_frame | |
| section. */ | |
| if (eh_frame_p) | |
| { | |
| cie_pointer = buf - unit->dwarf_frame_buffer - cie_pointer; | |
| cie_pointer -= (dwarf64_p ? 8 : 4); | |
| } | |
| /* In either case, validate the result is still within the section. */ | |
| if (cie_pointer >= unit->dwarf_frame_size) | |
| return NULL; | |
| fde = XOBNEW (&unit->objfile->objfile_obstack, struct dwarf2_fde); | |
| fde->cie = find_cie (cie_table, cie_pointer); | |
| if (fde->cie == NULL) | |
| { | |
| decode_frame_entry (unit, unit->dwarf_frame_buffer + cie_pointer, | |
| eh_frame_p, cie_table, fde_table, | |
| EH_CIE_TYPE_ID); | |
| fde->cie = find_cie (cie_table, cie_pointer); | |
| } | |
| gdb_assert (fde->cie != NULL); | |
| addr = read_encoded_value (unit, fde->cie->encoding, fde->cie->ptr_size, | |
| buf, &bytes_read, 0); | |
| fde->initial_location = gdbarch_adjust_dwarf2_addr (gdbarch, addr); | |
| buf += bytes_read; | |
| fde->address_range = | |
| read_encoded_value (unit, fde->cie->encoding & 0x0f, | |
| fde->cie->ptr_size, buf, &bytes_read, 0); | |
| addr = gdbarch_adjust_dwarf2_addr (gdbarch, addr + fde->address_range); | |
| fde->address_range = addr - fde->initial_location; | |
| buf += bytes_read; | |
| /* A 'z' augmentation in the CIE implies the presence of an | |
| augmentation field in the FDE as well. The only thing known | |
| to be in here at present is the LSDA entry for EH. So we | |
| can skip the whole thing. */ | |
| if (fde->cie->saw_z_augmentation) | |
| { | |
| uint64_t length; | |
| buf = gdb_read_uleb128 (buf, end, &length); | |
| if (buf == NULL) | |
| return NULL; | |
| buf += length; | |
| if (buf > end) | |
| return NULL; | |
| } | |
| fde->instructions = buf; | |
| fde->end = end; | |
| fde->eh_frame_p = eh_frame_p; | |
| add_fde (fde_table, fde); | |
| } | |
| return end; | |
| } | |
| /* Read a CIE or FDE in BUF and decode it. Entry_type specifies whether we | |
| expect an FDE or a CIE. */ | |
| static const gdb_byte * | |
| decode_frame_entry (struct comp_unit *unit, const gdb_byte *start, | |
| int eh_frame_p, | |
| struct dwarf2_cie_table *cie_table, | |
| struct dwarf2_fde_table *fde_table, | |
| enum eh_frame_type entry_type) | |
| { | |
| enum { NONE, ALIGN4, ALIGN8, FAIL } workaround = NONE; | |
| const gdb_byte *ret; | |
| ptrdiff_t start_offset; | |
| while (1) | |
| { | |
| ret = decode_frame_entry_1 (unit, start, eh_frame_p, | |
| cie_table, fde_table, entry_type); | |
| if (ret != NULL) | |
| break; | |
| /* We have corrupt input data of some form. */ | |
| /* ??? Try, weakly, to work around compiler/assembler/linker bugs | |
| and mismatches wrt padding and alignment of debug sections. */ | |
| /* Note that there is no requirement in the standard for any | |
| alignment at all in the frame unwind sections. Testing for | |
| alignment before trying to interpret data would be incorrect. | |
| However, GCC traditionally arranged for frame sections to be | |
| sized such that the FDE length and CIE fields happen to be | |
| aligned (in theory, for performance). This, unfortunately, | |
| was done with .align directives, which had the side effect of | |
| forcing the section to be aligned by the linker. | |
| This becomes a problem when you have some other producer that | |
| creates frame sections that are not as strictly aligned. That | |
| produces a hole in the frame info that gets filled by the | |
| linker with zeros. | |
| The GCC behaviour is arguably a bug, but it's effectively now | |
| part of the ABI, so we're now stuck with it, at least at the | |
| object file level. A smart linker may decide, in the process | |
| of compressing duplicate CIE information, that it can rewrite | |
| the entire output section without this extra padding. */ | |
| start_offset = start - unit->dwarf_frame_buffer; | |
| if (workaround < ALIGN4 && (start_offset & 3) != 0) | |
| { | |
| start += 4 - (start_offset & 3); | |
| workaround = ALIGN4; | |
| continue; | |
| } | |
| if (workaround < ALIGN8 && (start_offset & 7) != 0) | |
| { | |
| start += 8 - (start_offset & 7); | |
| workaround = ALIGN8; | |
| continue; | |
| } | |
| /* Nothing left to try. Arrange to return as if we've consumed | |
| the entire input section. Hopefully we'll get valid info from | |
| the other of .debug_frame/.eh_frame. */ | |
| workaround = FAIL; | |
| ret = unit->dwarf_frame_buffer + unit->dwarf_frame_size; | |
| break; | |
| } | |
| switch (workaround) | |
| { | |
| case NONE: | |
| break; | |
| case ALIGN4: | |
| complaint (&symfile_complaints, _("\ | |
| Corrupt data in %s:%s; align 4 workaround apparently succeeded"), | |
| unit->dwarf_frame_section->owner->filename, | |
| unit->dwarf_frame_section->name); | |
| break; | |
| case ALIGN8: | |
| complaint (&symfile_complaints, _("\ | |
| Corrupt data in %s:%s; align 8 workaround apparently succeeded"), | |
| unit->dwarf_frame_section->owner->filename, | |
| unit->dwarf_frame_section->name); | |
| break; | |
| default: | |
| complaint (&symfile_complaints, | |
| _("Corrupt data in %s:%s"), | |
| unit->dwarf_frame_section->owner->filename, | |
| unit->dwarf_frame_section->name); | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int | |
| qsort_fde_cmp (const void *a, const void *b) | |
| { | |
| struct dwarf2_fde *aa = *(struct dwarf2_fde **)a; | |
| struct dwarf2_fde *bb = *(struct dwarf2_fde **)b; | |
| if (aa->initial_location == bb->initial_location) | |
| { | |
| if (aa->address_range != bb->address_range | |
| && aa->eh_frame_p == 0 && bb->eh_frame_p == 0) | |
| /* Linker bug, e.g. gold/10400. | |
| Work around it by keeping stable sort order. */ | |
| return (a < b) ? -1 : 1; | |
| else | |
| /* Put eh_frame entries after debug_frame ones. */ | |
| return aa->eh_frame_p - bb->eh_frame_p; | |
| } | |
| return (aa->initial_location < bb->initial_location) ? -1 : 1; | |
| } | |
| void | |
| dwarf2_build_frame_info (struct objfile *objfile) | |
| { | |
| struct comp_unit *unit; | |
| const gdb_byte *frame_ptr; | |
| struct dwarf2_cie_table cie_table; | |
| struct dwarf2_fde_table fde_table; | |
| struct dwarf2_fde_table *fde_table2; | |
| cie_table.num_entries = 0; | |
| cie_table.entries = NULL; | |
| fde_table.num_entries = 0; | |
| fde_table.entries = NULL; | |
| /* Build a minimal decoding of the DWARF2 compilation unit. */ | |
| unit = (struct comp_unit *) obstack_alloc (&objfile->objfile_obstack, | |
| sizeof (struct comp_unit)); | |
| unit->abfd = objfile->obfd; | |
| unit->objfile = objfile; | |
| unit->dbase = 0; | |
| unit->tbase = 0; | |
| if (objfile->separate_debug_objfile_backlink == NULL) | |
| { | |
| /* Do not read .eh_frame from separate file as they must be also | |
| present in the main file. */ | |
| dwarf2_get_section_info (objfile, DWARF2_EH_FRAME, | |
| &unit->dwarf_frame_section, | |
| &unit->dwarf_frame_buffer, | |
| &unit->dwarf_frame_size); | |
| if (unit->dwarf_frame_size) | |
| { | |
| asection *got, *txt; | |
| /* FIXME: kettenis/20030602: This is the DW_EH_PE_datarel base | |
| that is used for the i386/amd64 target, which currently is | |
| the only target in GCC that supports/uses the | |
| DW_EH_PE_datarel encoding. */ | |
| got = bfd_get_section_by_name (unit->abfd, ".got"); | |
| if (got) | |
| unit->dbase = got->vma; | |
| /* GCC emits the DW_EH_PE_textrel encoding type on sh and ia64 | |
| so far. */ | |
| txt = bfd_get_section_by_name (unit->abfd, ".text"); | |
| if (txt) | |
| unit->tbase = txt->vma; | |
| TRY | |
| { | |
| frame_ptr = unit->dwarf_frame_buffer; | |
| while (frame_ptr < unit->dwarf_frame_buffer + unit->dwarf_frame_size) | |
| frame_ptr = decode_frame_entry (unit, frame_ptr, 1, | |
| &cie_table, &fde_table, | |
| EH_CIE_OR_FDE_TYPE_ID); | |
| } | |
| CATCH (e, RETURN_MASK_ERROR) | |
| { | |
| warning (_("skipping .eh_frame info of %s: %s"), | |
| objfile_name (objfile), e.message); | |
| if (fde_table.num_entries != 0) | |
| { | |
| xfree (fde_table.entries); | |
| fde_table.entries = NULL; | |
| fde_table.num_entries = 0; | |
| } | |
| /* The cie_table is discarded by the next if. */ | |
| } | |
| END_CATCH | |
| if (cie_table.num_entries != 0) | |
| { | |
| /* Reinit cie_table: debug_frame has different CIEs. */ | |
| xfree (cie_table.entries); | |
| cie_table.num_entries = 0; | |
| cie_table.entries = NULL; | |
| } | |
| } | |
| } | |
| dwarf2_get_section_info (objfile, DWARF2_DEBUG_FRAME, | |
| &unit->dwarf_frame_section, | |
| &unit->dwarf_frame_buffer, | |
| &unit->dwarf_frame_size); | |
| if (unit->dwarf_frame_size) | |
| { | |
| int num_old_fde_entries = fde_table.num_entries; | |
| TRY | |
| { | |
| frame_ptr = unit->dwarf_frame_buffer; | |
| while (frame_ptr < unit->dwarf_frame_buffer + unit->dwarf_frame_size) | |
| frame_ptr = decode_frame_entry (unit, frame_ptr, 0, | |
| &cie_table, &fde_table, | |
| EH_CIE_OR_FDE_TYPE_ID); | |
| } | |
| CATCH (e, RETURN_MASK_ERROR) | |
| { | |
| warning (_("skipping .debug_frame info of %s: %s"), | |
| objfile_name (objfile), e.message); | |
| if (fde_table.num_entries != 0) | |
| { | |
| fde_table.num_entries = num_old_fde_entries; | |
| if (num_old_fde_entries == 0) | |
| { | |
| xfree (fde_table.entries); | |
| fde_table.entries = NULL; | |
| } | |
| else | |
| { | |
| fde_table.entries | |
| = XRESIZEVEC (struct dwarf2_fde *, fde_table.entries, | |
| fde_table.num_entries); | |
| } | |
| } | |
| fde_table.num_entries = num_old_fde_entries; | |
| /* The cie_table is discarded by the next if. */ | |
| } | |
| END_CATCH | |
| } | |
| /* Discard the cie_table, it is no longer needed. */ | |
| if (cie_table.num_entries != 0) | |
| { | |
| xfree (cie_table.entries); | |
| cie_table.entries = NULL; /* Paranoia. */ | |
| cie_table.num_entries = 0; /* Paranoia. */ | |
| } | |
| /* Copy fde_table to obstack: it is needed at runtime. */ | |
| fde_table2 = XOBNEW (&objfile->objfile_obstack, struct dwarf2_fde_table); | |
| if (fde_table.num_entries == 0) | |
| { | |
| fde_table2->entries = NULL; | |
| fde_table2->num_entries = 0; | |
| } | |
| else | |
| { | |
| struct dwarf2_fde *fde_prev = NULL; | |
| struct dwarf2_fde *first_non_zero_fde = NULL; | |
| int i; | |
| /* Prepare FDE table for lookups. */ | |
| qsort (fde_table.entries, fde_table.num_entries, | |
| sizeof (fde_table.entries[0]), qsort_fde_cmp); | |
| /* Check for leftovers from --gc-sections. The GNU linker sets | |
| the relevant symbols to zero, but doesn't zero the FDE *end* | |
| ranges because there's no relocation there. It's (offset, | |
| length), not (start, end). On targets where address zero is | |
| just another valid address this can be a problem, since the | |
| FDEs appear to be non-empty in the output --- we could pick | |
| out the wrong FDE. To work around this, when overlaps are | |
| detected, we prefer FDEs that do not start at zero. | |
| Start by finding the first FDE with non-zero start. Below | |
| we'll discard all FDEs that start at zero and overlap this | |
| one. */ | |
| for (i = 0; i < fde_table.num_entries; i++) | |
| { | |
| struct dwarf2_fde *fde = fde_table.entries[i]; | |
| if (fde->initial_location != 0) | |
| { | |
| first_non_zero_fde = fde; | |
| break; | |
| } | |
| } | |
| /* Since we'll be doing bsearch, squeeze out identical (except | |
| for eh_frame_p) fde entries so bsearch result is predictable. | |
| Also discard leftovers from --gc-sections. */ | |
| fde_table2->num_entries = 0; | |
| for (i = 0; i < fde_table.num_entries; i++) | |
| { | |
| struct dwarf2_fde *fde = fde_table.entries[i]; | |
| if (fde->initial_location == 0 | |
| && first_non_zero_fde != NULL | |
| && (first_non_zero_fde->initial_location | |
| < fde->initial_location + fde->address_range)) | |
| continue; | |
| if (fde_prev != NULL | |
| && fde_prev->initial_location == fde->initial_location) | |
| continue; | |
| obstack_grow (&objfile->objfile_obstack, &fde_table.entries[i], | |
| sizeof (fde_table.entries[0])); | |
| ++fde_table2->num_entries; | |
| fde_prev = fde; | |
| } | |
| fde_table2->entries | |
| = (struct dwarf2_fde **) obstack_finish (&objfile->objfile_obstack); | |
| /* Discard the original fde_table. */ | |
| xfree (fde_table.entries); | |
| } | |
| set_objfile_data (objfile, dwarf2_frame_objfile_data, fde_table2); | |
| } | |
| void | |
| _initialize_dwarf2_frame (void) | |
| { | |
| dwarf2_frame_data = gdbarch_data_register_pre_init (dwarf2_frame_init); | |
| dwarf2_frame_objfile_data = register_objfile_data (); | |
| #if GDB_SELF_TEST | |
| selftests::register_test_foreach_arch ("execute_cfa_program", | |
| selftests::execute_cfa_program_test); | |
| #endif | |
| } |