| # Copyright 2003-2021 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| # This file was written by Elena Zannoni (ezannoni@cygnus.com) |
| |
| |
| # |
| # test running programs |
| # |
| |
| if { [skip_cplus_tests] } { continue } |
| |
| standard_testfile .cc |
| |
| if {[prepare_for_testing "failed to prepare" $testfile $srcfile \ |
| {debug c++ nowarnings}]} { |
| return -1 |
| } |
| |
| # This testcase cannot use runto_main because of the different prompt |
| # we get when using annotation level 2. |
| # |
| if ![target_can_use_run_cmd] { |
| return 0 |
| } |
| |
| # |
| # line number where we need to stop in main |
| # |
| set main_line 25 |
| |
| # The commands we test here produce many lines of output; disable "press |
| # <return> to continue" prompts. |
| gdb_test_no_output "set height 0" |
| |
| # |
| # break at main |
| # |
| gdb_test "break 25" \ |
| "Breakpoint.*at.* file .*$srcfile, line.*" \ |
| "breakpoint main" |
| |
| |
| # |
| # NOTE: this prompt is OK only when the annotation level is > 1 |
| # NOTE: When this prompt is in use the gdb_test procedure cannot be used because |
| # it assumes that the last char of the gdb_prompt is a white space. This is not |
| # true with this annotated prompt. So we must use send_gdb and gdb_expect. |
| # |
| |
| set old_gdb_prompt $gdb_prompt |
| set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n" |
| |
| send_gdb "set annotate 3\n" |
| gdb_expect_list "annotation set at level 3" "\r\n$gdb_prompt$" { |
| "set annotate 3" |
| } |
| |
| send_gdb "run\n" |
| gdb_expect_list "first run until main breakpoint" "$gdb_prompt$" { |
| "\r\n\032\032post-prompt\r\n" |
| "Starting program: .*annota3 \r\n" |
| "\r\n\032\032starting\r\n" |
| "\r\n\032\032breakpoint 1\r\n" |
| "\r\n" |
| "Breakpoint 1, " |
| "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n" |
| "main \\(\\) at .*annota3.cc:25\r\n" |
| "\r\n\032\032source.*annota3.cc:25:.*:beg:0x\[0-9a-z\]+\r\n" |
| "\r\n\032\032stopped\r\n" |
| } |
| |
| # |
| # print class 'a' with public fields. |
| # |
| send_gdb "print a\n" |
| gdb_expect_list "print class" "$gdb_prompt$" { |
| "\r\n\032\032post-prompt\r\n" |
| ".*= \\{x = 1, y = 2\\}\r\n" |
| } |
| |
| # |
| # continue until exit |
| # this will test: |
| # annotate-exited |
| # |
| send_gdb "continue\n" |
| gdb_expect_list "continue to exit" "$gdb_prompt$" [concat { |
| "\r\n\032\032post-prompt\r\n" |
| "Continuing.\r\n" |
| "\r\n\032\032starting\r\n" |
| "a.x is 1\r\n" |
| "\r\n\032\032exited 0\r\n"} [list "$inferior_exited_re normally.\r\n"] { |
| "\r\n\032\032stopped\r\n" |
| }] |
| |
| # |
| # delete all breakpoints |
| # |
| send_gdb "delete\n" |
| gdb_expect { |
| -re ".*Delete all breakpoints. \\(y or n\\) \r\n\032\032query.*$" { |
| send_gdb "y\n" |
| gdb_expect { |
| -re "\r\n\032\032post-query\r\n$gdb_prompt$" { pass "delete bps" } |
| -re ".*$gdb_prompt$" { fail "delete bps" } |
| timeout { fail "delete bps (timeout)" } |
| } |
| } |
| -re ".*$gdb_prompt$" { fail "delete bps" } |
| timeout { fail "delete bps (timeout)" } |
| } |
| |
| # |
| # break at first line of main. |
| # |
| send_gdb "break 22\n" |
| gdb_expect_list "break at main" "$gdb_prompt$" { |
| "\r\n\032\032post-prompt\r\n" |
| "Breakpoint.*at 0x\[a-z0-9\]+: file.*annota3.cc, line 22.\r\n" |
| } |
| |
| # |
| # run program up to breakpoint. |
| # |
| |
| |
| send_gdb "run\n" |
| gdb_expect_list "second run until main breakpoint" "$gdb_prompt$" { |
| "\r\n\032\032post-prompt\r\n" |
| "\r\n\032\032starting\r\n" |
| "\r\n\032\032breakpoint 2\r\n" |
| "\r\n" |
| "Breakpoint 2, " |
| "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n" |
| "main \\(\\) at .*annota3.cc:22\r\n" |
| "\r\n\032\032source.*annota3.cc:22:.*:beg:0x\[0-9a-z\]+\r\n" |
| "\r\n\032\032stopped\r\n" |
| } |
| |
| # |
| # set up a watch point on a.x |
| # |
| send_gdb "watch a.x\n" |
| gdb_expect_list "set watch on a.x" "$gdb_prompt$" { |
| "\r\n\032\032post-prompt\r\n" |
| ".*atchpoint 3: a.x\r\n" \ |
| } |
| |
| # |
| # do a next, so that the watchpoint triggers. This will test: |
| # annotate-watchpoint |
| # |
| gdb_test_multiple "next" "watch triggered on a.x" { |
| -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n(\032\032frame-begin 0 0x\[0-9a-z\]+\r\n|)main \\(\\) at .*$srcfile:$decimal\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" { |
| pass "watch triggered on a.x" |
| } |
| } |
| |
| # |
| # send ^C to gdb, so that the quit() function gets called |
| # and annotate-quit is tested |
| # test: |
| # annotate-quit |
| # |
| if ![target_info exists gdb,nointerrupts] { |
| send_gdb "\003" |
| gdb_expect_list "annotate-quit" "$gdb_prompt$" { |
| "\r\n\032\032error-begin\r\n" |
| "Quit\r\n" |
| "\r\n\032\032quit\r\n" |
| } |
| } |
| |
| # |
| # FIXME: the testsuite does not currently have tests for |
| # annotate_catchpoints and annotate_function_call |
| # and a few variants of the annotations that are |
| # tested (marked by FIXME on the annot?.exp files) |
| # |
| |
| # reinstall the old prompt for the rest of the testsuite. |
| |
| set gdb_prompt $old_gdb_prompt |
| |