blob: c99ff70450f7bfb4cc8f1991d1c32e30cc6696ed [file] [log] [blame]
2016-12-22 Doug Evans <xdje42@gmail.com>
* infrun.c (set_step_over_info): Add comment.
2016-12-22 Doug Evans <xdje42@gmail.com>
* NEWS: Document new syntax for "mt print symbols", "mt print psymbols"
and "mt print msymbols" commands.
* psymtab.c (DEV_TTY): Delete.
(dump_psymtab_addrmap): Don't dump if psymtabs_addrmap is NULL.
(maintenance_print_psymbols): Rewrite for new syntax:
mt print psymbols [-objfile objfile] [-pc address] [outfile]
mt print psymbols [-objfile objfile] [-source source] [outfile]
(_initialize_psymtab): Update help text.
* symmisc.c (maintenance_print_symbols): Rewrite for new syntax:
mt print symbols [-pc address] [outfile]
mt print symbols [-objfile objfile] [-source source] [outfile]
(maintenance_print_msymbols): Rewrite for new syntax:
mt print msymbols [-objfile objfile] [outfile]
Only print symbols for the current progspace.
(_initialize_symmisc): Update help text.
2016-12-22 Simon Marchi <simon.marchi@ericsson.com>
* ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header,
ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int,
ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream,
ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text,
ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags,
ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect):
Remove, replace with a method in class ui_out.
(table_begin_ftype): Remove, replace with pure virtual method in
class ui_out.
(table_body_ftype): Likewise.
(table_end_ftype): Likewise.
(table_header_ftype): Likewise.
(ui_out_begin_ftype): Likewise.
(ui_out_end_ftype): Likewise.
(field_int_ftype): Likewise.
(field_skip_ftype): Likewise.
(field_string_ftype): Likewise.
(field_fmt_ftype): Likewise.
(spaces_ftype): Likewise.
(text_ftype): Likewise.
(message_ftype): Likewise.
(wrap_hint_ftype): Likewise.
(flush_ftype): Likewise.
(redirect_ftype): Likewise.
(data_destroy_ftype): Likewise.
(struct ui_out_impl): Remove, replace with class ui_out.
(ui_out_new): Remove.
(class ui_out): New class.
* ui-out.c (struct ui_out): Remove, replaced with class ui_out.
(current_level): Remove, replace with ui_out method.
(push_level): Likewise.
(pop_level): Likewise.
(uo_table_begin, uo_table_body, uo_table_end, uo_table_header,
uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt,
uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush,
uo_redirect, uo_field_string): Remove.
(ui_out_table_begin): Replace with ...
(ui_out::table_begin): ... this.
(ui_out_table_body): Replace with ...
(ui_out::table_body): ... this.
(ui_out_table_end): Replace with ...
(ui_out::table_end): ... this.
(ui_out_table_header): Replace with ...
(ui_out::table_header): ... this.
(ui_out_begin): Replace with ...
(ui_out::begin): ... this.
(ui_out_end): Replace with ...
(ui_out::end): ... this.
(ui_out_field_int): Replace with ...
(ui_out::field_int): ... this.
(ui_out_field_fmt_int): Replace with ...
(ui_out::field_fmt_int): ... this.
(ui_out_field_core_addr): Replace with ...
(ui_out::field_core_addr): ... this.
(ui_out_field_stream): Replace with ...
(ui_out::field_stream): ... this.
(ui_out_field_skip): Replace with ...
(ui_out::field_skip): ... this.
(ui_out_field_string): Replace with ...
(ui_out::field_string): ... this.
(ui_out_field_fmt): Replace with ...
(ui_out::field_fmt): ... this.
(ui_out_spaces): Replace with ...
(ui_out::spaces): ... this.
(ui_out_text): Replace with ...
(ui_out::text): ... this.
(ui_out_message): Replace with ...
(ui_out::message): ... this.
(ui_out_wrap_hint): Replace with ...
(ui_out::wrap_hint): ... this.
(ui_out_flush): Replace with ...
(ui_out::flush): ... this.
(ui_out_redirect): Replace with ...
(ui_out::redirect): ... this.
(ui_out_test_flags): Replace with ...
(ui_out::test_flags): ... this.
(ui_out_is_mi_like_p): Replace with ...
(ui_out::is_mi_like_p): ... this.
(verify_field): Replace with ...
(ui_out::verify_field): ... this.
(ui_out_query_field): Replace with ...
(ui_out::query_table_field): ... this.
(ui_out_data): Remove.
(ui_out_new): Remove, replace with ...
(ui_out::ui_out): ... this constructor.
(do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end,
do_cleanup_end, make_cleanup_ui_out_tuple_begin_end,
make_cleanup_ui_out_list_begin_end): Update fallouts of struct
ui_out -> class ui_out change.
* cli-out.c (cli_out_data): Remove.
(cli_uiout_dtor): Remove.
(cli_table_begin): Replace with ...
(cli_ui_out::do_table_begin): ... this new method.
(cli_table_body): Replace with ...
(cli_ui_out::do_table_body): ... this new method.
(cli_table_end): Replace with ...
(cli_ui_out::do_table_end): ... this new method.
(cli_table_header): Replace with ...
(cli_ui_out::do_table_header): ... this new method.
(cli_begin): Replace with ...
(cli_ui_out::do_begin): ... this new method.
(cli_end): Replace with ...
(cli_ui_out::do_end): ... this new method.
(cli_field_int): Replace with ...
(cli_ui_out::do_field_int): ... this new method.
(cli_field_skip): Replace with ...
(cli_ui_out::do_field_skip): ... this new method.
(cli_field_string): Replace with ...
(cli_ui_out::do_field_string): ... this new method.
(cli_field_fmt): Replace with ...
(cli_ui_out::do_field_fmt): ... this new method.
(cli_spaces): Replace with ...
(cli_ui_out::do_spaces): ... this new method.
(cli_text): Replace with ...
(cli_ui_out::do_text): ... this new method.
(cli_message): Replace with ...
(cli_ui_out::do_message): ... this new method.
(cli_wrap_hint): Replace with ...
(cli_ui_out::do_wrap_hint): ... this new method.
(cli_flush): Replace with ...
(cli_ui_out::do_flush): ... this new method.
(cli_redirect): Replace with ...
(cli_ui_out::do_redirect): ... this new method.
(out_field_fmt): Replace with ...
(cli_ui_out::out_field_fmt): ... this new method.
(field_separator): Replace with ...
(cli_ui_out::field_separator): ... this new method.
(cli_out_set_stream): Replace with ...
(cli_ui_out::set_stream): ... this new method.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_ui_out_impl::cli_ui_out_impl): New constructor.
(cli_ui_out_impl::~cli_ui_out_impl): New destructor.
(cli_out_new): Change return type to cli_ui_out *, instantiate a
cli_ui_out.
* cli-out.h (cli_ui_out_data): Remove, replace with class
cli_ui_out.
(class cli_ui_out): New class.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_out_new): Change return type to cli_ui_out*.
(cli_out_set_stream): Remove.
* cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type
to cli_ui_out*.
(cli_interpreter_resume): Adapt.
(cli_interpreter_exec): Adapt.
* mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove.
(mi_ui_out_impl): Remove.
(mi_table_begin): Replace with ...
(mi_ui_out::do_table_begin): ... this.
(mi_table_body): Replace with ...
(mi_ui_out::do_table_body): ... this.
(mi_table_end): Replace with ...
(mi_ui_out::do_table_end): ... this.
(mi_table_header): Replace with ...
(mi_ui_out::do_table_header): ... this.
(mi_begin): Replace with ...
(mi_ui_out::do_begin): ... this.
(mi_end): Replace with ...
(mi_ui_out::do_end): ... this.
(mi_field_int): Replace with ...
(mi_ui_out::do_field_int): ... this.
(mi_field_skip): Replace with ...
(mi_ui_out::do_field_skip): ... this.
(mi_field_string): Replace with ...
(mi_ui_out::do_field_string): ... this.
(mi_field_fmt): Replace with ...
(mi_ui_out::do_field_fmt): ... this.
(mi_spaces): Replace with ...
(mi_ui_out::do_spaces): ... this.
(mi_text): Replace with ...
(mi_ui_out::do_text): ... this.
(mi_message): Replace with ...
(mi_ui_out::do_message): ... this.
(mi_wrap_hint): Replace with ...
(mi_ui_out::do_wrap_hint): ... this.
(mi_flush): Replace with ...
(mi_ui_out::do_flush): ... this.
(mi_redirect): Replace with ...
(mi_ui_out::do_redirect):
(field_separator): Replace with ...
(mi_ui_out::field_separator):
(mi_open): Replace with ...
(mi_ui_out::open): ... this.
(mi_close): Replace with ...
(mi_ui_out::close): ... this.
(mi_out_rewind): Replace with ...
(mi_ui_out::rewind): ... this.
(mi_out_put): Replace with ...
(mi_ui_out::put): ... this.
(mi_version): Replace with ...
(mi_ui_out::version): ... this.
(mi_out_data_ctor): Replace with ...
(mi_ui_out::mi_ui_out): ... this.
(mi_out_data_dtor): Replace with ...
(mi_ui_out::~mi_ui_out): ... this.
(mi_out_new): Change return type to mi_ui_out*, instantiate
an mi_ui_out object.
(as_mi_ui_out): New function.
(mi_version): Update fallouts of struct ui_out to class ui_out
transition.
(mi_out_put): Likewise.
(mi_out_rewind): Likewise.
* mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*.
* tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl):
Remove.
(tui_field_int): Replace with ...
(tui_ui_out::do_field_int): ... this.
(tui_field_string): Replace with ...
(tui_ui_out::do_field_string): ... this.
(tui_field_fmt): Replace with ...
(tui_ui_out::do_field_fmt): ... this.
(tui_text): Replace with ...
(tui_ui_out::do_text): ... this.
(tui_out_new): Change return type to tui_ui_out*, instantiate
tui_ui_out object.
(tui_ui_out::tui_ui_out): New.
* tui/tui-out.h: New file.
* tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h.
* tui/tui-io.c: Include tui/tui-out.h.
(tui_old_uiout): Change type to cli_ui_out*.
(tui_setup_io): Use dynamic_cast.
* tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*.
* tui/tui-interp.c (tui_resume): Adapt.
* ada-lang.c (print_it_exception): Update fallouts of struct
ui_out to class ui_out transition.
(print_one_exception): Likewise.
(print_mention_exception): Likewise.
* ada-tasks.c (print_ada_task_info): Likewise.
(info_task): Likewise.
(task_command): Likewise.
* auto-load.c (print_script): Likewise.
(auto_load_info_scripts): Likewise.
(info_auto_load_cmd): Likewise.
* break-catch-sig.c (signal_catchpoint_print_one): Likewise.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
(print_one_exception_catchpoint): Likewise.
(print_one_detail_exception_catchpoint): Likewise.
(print_mention_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise.
(print_solib_event): Likewise.
(watchpoint_check): Likewise.
(wrap_indent_at_field): Likewise.
(print_breakpoint_location): Likewise.
(output_thread_groups): Likewise.
(print_one_breakpoint_location): Likewise.
(breakpoint_1): Likewise.
(default_collect_info): Likewise.
(watchpoints_info): Likewise.
(print_it_catch_fork): Likewise.
(print_one_catch_fork): Likewise.
(print_it_catch_vfork): Likewise.
(print_one_catch_vfork): Likewise.
(print_it_catch_solib): Likewise.
(print_one_catch_solib): Likewise.
(print_it_catch_exec): Likewise.
(print_one_catch_exec): Likewise.
(mention): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_it_watchpoint): Likewise.
(print_mention_watchpoint): Likewise.
(print_it_masked_watchpoint): Likewise.
(print_one_detail_masked_watchpoint): Likewise.
(print_mention_masked_watchpoint): Likewise.
(bkpt_print_it): Likewise.
(tracepoint_print_one_detail): Likewise.
(tracepoint_print_mention): Likewise.
(update_static_tracepoint): Likewise.
(tracepoints_info): Likewise.
(save_breakpoints): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
* cli/cli-logging.c (set_logging_redirect): Likewise.
(pop_output_files): Likewise.
(handle_redirections): Likewise.
* cli/cli-script.c (print_command_lines): Likewise.
* cli/cli-setshow.c (do_show_command): Likewise.
(cmd_show_list): Likewise.
* cp-abi.c (list_cp_abis): Likewise.
(show_cp_abi_cmd): Likewise.
* darwin-nat-info.c (darwin_debug_regions_recurse): Likewise.
* disasm.c (gdb_pretty_print_insn): Likewise.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
* gdb_bfd.c (print_one_bfd): Likewise.
(maintenance_info_bfds): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise.
* i386-tdep.c (i386_mpx_print_bounds): Likewise.
* infcmd.c (run_command_1): Likewise.
(print_return_value_1): Likewise.
* inferior.c (print_selected_inferior): Likewise.
(print_inferior): Likewise.
* infrun.c (print_end_stepping_range_reason): Likewise.
(print_signal_exited_reason): Likewise.
(print_exited_reason): Likewise.
(print_signal_received_reason): Likewise.
(print_no_history_reason): Likewise.
* interps.c (interp_set): Likewise.
* linespec.c (decode_line_full): Likewise.
* linux-thread-db.c (info_auto_load_libthread_db): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
(mi_cmd_env_path): Likewise.
(mi_cmd_env_dir): Likewise.
(mi_cmd_inferior_tty_show): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise.
(print_partial_file_name): Likewise.
(mi_cmd_file_list_exec_source_files): Likewise.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise.
(mi_cmd_info_gdb_mi_command): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise.
(mi_cmd_stack_list_args): Likewise.
(list_arg_or_local): Likewise.
* mi/mi-cmd-var.c (print_varobj): Likewise.
(mi_cmd_var_create): Likewise.
(mi_cmd_var_delete): Likewise.
(mi_cmd_var_set_format): Likewise.
(mi_cmd_var_show_format): Likewise.
(mi_cmd_var_info_num_children): Likewise.
(mi_cmd_var_list_children): Likewise.
(mi_cmd_var_info_type): Likewise.
(mi_cmd_var_info_path_expression): Likewise.
(mi_cmd_var_info_expression): Likewise.
(mi_cmd_var_show_attributes): Likewise.
(mi_cmd_var_evaluate_expression): Likewise.
(mi_cmd_var_assign): Likewise.
(varobj_update_one): Likewise.
* mi/mi-interp.c (as_mi_interp): Likewise.
(mi_on_normal_stop_1): Likewise.
(mi_tsv_modified): Likewise.
(mi_breakpoint_created): Likewise.
(mi_breakpoint_modified): Likewise.
(mi_solib_loaded): Likewise.
(mi_solib_unloaded): Likewise.
(mi_command_param_changed): Likewise.
(mi_memory_changed): Likewise.
(mi_user_selected_context_changed): Likewise.
* mi/mi-main.c (print_one_inferior): Likewise.
(output_cores): Likewise.
(list_available_thread_groups): Likewise.
(mi_cmd_data_list_register_names): Likewise.
(mi_cmd_data_list_changed_registers): Likewise.
(output_register): Likewise.
(mi_cmd_data_evaluate_expression): Likewise.
(mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_list_features): Likewise.
(mi_cmd_list_target_features): Likewise.
(mi_cmd_add_inferior): Likewise.
(mi_execute_command): Likewise.
(mi_load_progress): Likewise.
(print_variable_or_computed): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise.
* osdata.c (info_osdata_command): Likewise.
* probe.c (gen_ui_out_table_header_info): Likewise.
(print_ui_out_not_applicables): Likewise.
(print_ui_out_info): Likewise.
(info_probes_for_ops): Likewise.
(enable_probes_command): Likewise.
(disable_probes_command): Likewise.
* progspace.c (print_program_space): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
* python/py-framefilter.c (py_print_type): Likewise.
(py_print_value): Likewise.
(py_print_single_arg): Likewise.
(enumerate_args): Likewise.
(enumerate_locals): Likewise.
(py_print_args): Likewise.
(py_print_frame): Likewise.
* record-btrace.c (btrace_ui_out_decode_error): Likewise.
(btrace_call_history_insn_range): Likewise.
(btrace_call_history_src_line): Likewise.
(btrace_call_history): Likewise.
* remote.c (show_remote_cmd): Likewise.
* skip.c (skip_info): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* source.c (print_source_lines_base): Likewise.
* spu-tdep.c (info_spu_event_command): Likewise.
(info_spu_signal_command): Likewise.
(info_spu_mailbox_list): Likewise.
(info_spu_dma_cmdlist): Likewise.
(info_spu_dma_command): Likewise.
(info_spu_proxydma_command): Likewise.
* stack.c (print_stack_frame): Likewise.
(print_frame_arg): Likewise.
(read_frame_arg): Likewise.
(print_frame_args): Likewise.
(print_frame_info): Likewise.
(print_frame): Likewise.
* symfile.c (load_progress): Likewise.
(generic_load): Likewise.
(print_transfer_performance): Likewise.
* thread.c (do_captured_list_thread_ids): Likewise.
(print_thread_info_1): Likewise.
(restore_selected_frame): Likewise.
(do_captured_thread_select): Likewise.
(print_selected_thread_frame): Likewise.
* top.c (execute_command_to_string): Likewise.
* tracepoint.c (tvariables_info_1): Likewise.
(trace_status_mi): Likewise.
(tfind_1): Likewise.
(print_one_static_tracepoint_marker): Likewise.
(info_static_tracepoint_markers_command): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
(fputs_maybe_filtered): Likewise.
2016-12-20 Pedro Alves <palves@redhat.com>
* nto-tdep.c (nto_find_and_open_solib): Constify 'solib'
parameter.
* nto-tdep.h (nto_find_and_open_solib): Constify 'solib'
parameter.
* solib.c (solib_find_1, exec_file_find, solib_find): Constify
in_pathname' parameter.
* solist.h (struct target_so_ops) <find_and_open_solib>: Constify
'soname' parameter.
(exec_file_find, solib_find): Constify 'in_pathname' parameter.
2016-12-20 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
PR gdb/20977
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept): New
noexcept function, factored out from ...
(gdb_rl_callback_read_char_wrapper): ... this.
(gdb_rl_callback_handler): Mark noexcept.
2016-12-20 Antoine Tremblay <antoine.tremblay@ericsson.com>
* .dir-locals.el: Set c++ mode for the directory and set indent
properly.
* gdb-code-style.el: Set c-set-offset 'innamespace as a safe value
to be used in .dir-locals.el.
2016-12-16 Bernhard Heckel <bernhard.heckel@intel.com>
* darwin-nat-info.c (info_mach_region_command): Use expression_up.
2016-12-12 Yao Qi <yao.qi@linaro.org>
PR tdep/20955
* cris-tdep.c (cris_delayed_get_disassembler): Remove the
assert.
2016-12-09 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove vax-obsd-tdep.o.
* alpha-fbsd-tdep.c (_initialize_alphafbsd_tdep): Adjust.
* alpha-nbsd-tdep.c: Move comment to _initialize_alphanbsd_tdep.
(alphanbsd_core_osabi_sniffer): Delete.
(_initialize_alphanbsd_tdep): No longer handle a.out.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Adjust.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Adjust.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Adjust.
* amd64-obsd-tdep.c (amd64obsd_supply_regset)
(amd64obsd_combined_regset)
(amd64obsd_iterate_over_regset_sections, amd64obsd_core_init_abi):
Delete.
(_initialize_amd64obsd_tdep): Don't handle a.out.
* arm-nbsd-nat.c (struct md_core, fetch_core_registers)
(arm_netbsd_core_fns): Delete.
(_initialize_arm_netbsd_nat): Don't register arm_netbsd_core_fns.
* arm-nbsd-tdep.c (arm_netbsd_aout_init_abi)
(arm_netbsd_aout_osabi_sniffer): Delete.
(_initialize_arm_netbsd_tdep): Don't handle a.out.
* arm-obsd-tdep.c (armobsd_core_osabi_sniffer): Delete.
(_initialize_armobsd_tdep): Don't handle a.out.
* arm-tdep.c (arm_gdbarch_init): Remove bfd_target_aout_flavour
case.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Remove
SunOS a.out handling.
* configure.tgt (vax-*-netbsd* | vax-*-knetbsd*-gnu): Remove
vax-obsd-tdep.o from gdb_target_objs.
(vax-*-openbsd*): Likewise.
(*-*-freebsd*): Adjust default gdb_osabi.
(*-*-openbsd*): Likewise.
* dbxread.c (block_address_function_relative): Delete.
(dbx_symfile_read): Remove reference to
block_address_function_relative.
(dbx_symfile_read): Don't call read_dbx_dynamic_symtab.
(read_dbx_dynamic_symtab): Delete.
(process_one_symbol): Remove references to
block_address_function_relative.
* defs.h (GDB_OSABI_FREEBSD_AOUT, GDB_OSABI_NETBSD_AOUT): Remove.
(GDB_OSABI_FREEBSD_ELF): Rename to ...
(GDB_OSABI_FREEBSD): ... this.
(GDB_OSABI_NETBSD_ELF): Rename to ...
(GDB_OSABI_NETBSD): ... this.
(GDB_OSABI_OPENBSD_ELF): Rename to ...
(GDB_OSABI_OPENBSD): ... this.
(GDB_OSABI_HPUX_ELF, GDB_OSABI_HPUX_SOM): Remove.
* fbsd-tdep.c: Adjust comment.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Adjust.
* hppa-obsd-tdep.c (GDB_OSABI_NETBSD_CORE): Delete.
(hppaobsd_core_osabi_sniffer): Delete.
(_initialize_hppabsd_tdep): Don't handle a.out.
* hppa-tdep.c (hppa_stub_frame_unwind_cache): Don't handle
GDB_OSABI_HPUX_SOM.
(hppa_gdbarch_init): Likewise.
* i386-bsd-tdep.c (i386bsd_aout_osabi_sniffer)
(i386bsd_core_osabi_sniffer, _initialize_i386bsd_tdep): Delete.
* i386-fbsd-tdep.c (i386fbsdaout_init_abi): Delete. Merge bits
with ...
(i386fbsd_init_abi): ... this.
(_initialize_i386fbsd_tdep): Don't handle a.out.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Adjust.
* i386-obsd-tdep.c (i386obsd_aout_supply_regset)
(i386obsd_aout_gregset)
(i386obsd_aout_iterate_over_regset_sections): Delete.
(i386obsd_init_abi): Merge with i386obsd_elf_init_abi.
(i386obsd_aout_init_abi): Delete.
(_initialize_i386obsd_tdep): Don't handle a.out.
* m68k-bsd-tdep.c (m68kobsd_sigtramp_cache_init)
(m68kobsd_sigtramp): Delete.
(m68kbsd_init_abi): Merge with ...
(m68kbsd_elf_init_abi): ... this, and delete it.
(m68kbsd_aout_init_abi): Delete.
(m68kbsd_aout_osabi_sniffer, m68kbsd_core_osabi_sniffer): Delete.
(_initialize_m68kbsd_tdep): Don't handle a.out.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Adjust.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Adjust.
* osabi.c (gdb_osabi_names): Remove "a.out" entries. Drop "ELF"
suffixes. Remove "HP-UX" entries.
(generic_elf_osabi_sniff_abi_tag_sections): Adjust.
(generic_elf_osabi_sniffer): No longer handle GDB_OSABI_HPUX_ELF.
Adjust.
(_initialize_ppcfbsd_tdep): Adjust.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Adjust.
* ppc-obsd-tdep.c (GDB_OSABI_NETBSD_CORE)
(ppcobsd_core_osabi_sniffer): Delete.
(_initialize_ppcobsd_tdep): Don't handle a.out.
* rs6000-tdep.c (rs6000_gdbarch_init): Adjust.
* sh-nbsd-tdep.c (GDB_OSABI_NETBSD_CORE)
(shnbsd_core_osabi_sniffer): Delete.
(_initialize_shnbsd_tdep): Don't handle a.out.
* solib.c (clear_solib): Don't handle SunOS/a.out.
* sparc-nbsd-tdep.c (sparc32nbsd_init_abi): Make extern.
(sparc32nbsd_aout_init_abi): Delete.
(sparc32nbsd_elf_init_abi): Merged into sparc32nbsd_init_abi.
(sparcnbsd_aout_osabi_sniffer): Delete.
(GDB_OSABI_NETBSD_CORE, sparcnbsd_core_osabi_sniffer): Delete.
(_initialize_sparcnbsd_tdep): No longer handle a.out.
* sparc-obsd-tdep.c (sparc32obsd_init_abi)
(_initialize_sparc32obsd_tdep): Adjust.
* sparc-tdep.h (sparc32nbsd_elf_init_abi): Rename to ...
(sparc32nbsd_init_abi): ... this.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Adjust.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Adjust.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Adjust.
* stabsread.c: Update comment.
* symmisc.c (print_objfile_statistics): Don't mention "a.out" in
output.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Adjust.
* vax-obsd-tdep.c: Delete file.
2016-12-09 Yao Qi <yao.qi@linaro.org>
PR tdep/20954
* rx-tdep.c (rx_psw_type): New function.
(rx_fpsw_type): New function.
(rx_register_type): Call rx_psw_type and rx_fpsw_type.
(rx_gdbarch_init): Move code to rx_psw_type and
rx_fpsw_type.
2016-12-09 Yao Qi <yao.qi@linaro.org>
PR tdep/20953
* rl78-tdep.c (rl78_psw_type): New function.
(rl78_register_type): Call rl78_psw_type.
(rl78_gdbarch_init): Move code to rl78_psw_type.
2016-12-09 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (instruction_reader::read): Call
read_code_unsigned_integer instead of
read_memory_unsigned_integer.
2016-12-09 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (skip_prologue_function): Call
read_code_unsigned_integer instead of
read_memory_unsigned_integer.
(thumb_analyze_prologue): Likewise.
(arm_analyze_load_stack_chk_guard): Likewise.
(arm_skip_stack_protector): Likewise.
(arm_analyze_prologue):Likewise.
(extend_buffer_earlier): Call target_read_code instead
of target_read_memory.
(arm_adjust_breakpoint_address): Likewise.
2016-12-09 Thomas Schwinge <thomas@codesourcery.com>
* gnu-nat.c (gnu_create_inferior): After startup_inferior, call
prune_threads.
* inferior.c (print_selected_inferior): Avoid PATH_MAX usage.
2016-12-08 Simon Marchi <simon.marchi@ericsson.com>
Thomas Schwinge <thomas@codesourcery.com>
* gnu-nat.c (set_sig_thread_cmd): Use parse_thread_id instead of
global_thread_id_to_ptid.
2016-12-08 Thomas Schwinge <thomas@codesourcery.com>
* config/i386/i386gnu.mh (%_S.o %_U.o): Add "-x c" to
"COMPILE.post".
* gnu-nat.c: #include Mach/Hurd headers before all others. Wrap
Mach/Hurd headers and MIG stubs' prototypes in 'extern "C"'.
* i386-gnu-nat.c: Likewise.
* gnu-nat.c (proc_get_exception_port, proc_set_exception_port)
(INF_RESUME_MSGPORT_RPC, proc_get_state, _proc_get_exc_port)
(proc_steal_exc_port, proc_restore_exc_port, make_proc)
(inf_startup, inf_set_pid, inf_validate_procinfo)
(inf_validate_task_sc, inf_set_traced, inf_validate_procs)
(inf_signal, inf_continue, gnu_wait, S_exception_raise_request)
(do_mach_notify_dead_name, S_proc_wait_reply)
(S_msg_sig_post_untraced_reply, S_msg_sig_post_reply)
(port_msgs_queued, gnu_read_inferior, gnu_write_inferior)
(gnu_find_memory_regions, steal_exc_port, thread_takeover_sc_cmd)
(flush_inferior_icache): Instead of "error_t" use "kern_return_t".
* i386-gnu-nat.c (fetch_fpregs, store_fpregs, i386_gnu_dr_get)
(i386_gnu_dr_set): Likewise.
* gnu-nat.c (set_task_pause_cmd, set_signals_cmd)
(set_exceptions_cmd): Add variants taking an "int arg" instead of
a "char *". Make the "char *" variants use the former.
(set_noninvasive_cmd): Also use the "int arg" variants.
* gnu-nat.c (gnu_create_inferior): Move nested "trace_me"
function...
(gnu_ptrace_me): ... here.
* i386-gnu-nat.c (i386_gnu_dr_set_control_one)
(i386_gnu_dr_set_addr_one): Explicitly cast "void *".
2016-12-07 Thomas Schwinge <thomas@codesourcery.com>
* gnu-nat.c (set_sig_thread_cmd): Call global_thread_id_to_ptid
instead of thread_id_to_pid.
2016-12-06 Simon Marchi <simon.marchi@ericsson.com>
* inferior.c (inferior_command): Remove duplicate
find_inferior_id call.
2016-12-06 Yao Qi <yao.qi@linaro.org>
* frame.c (frame_register_unwind): Set *realnump if *lvalp is
lval_register.
* value.c (deprecated_value_next_frame_id_hack): Assert
value->lval is lval_register.
(deprecated_value_regnum_hack): Likewise.
2016-12-02 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.h: Include "common/enum-flags.h".
(enum ui_flags): Rename to ...
(enum ui_out_flag): ... this.
(ui_out_flags): Define enum flag type.
(ui_out_test_flags): Change type of parameter to ui_out_flags.
(ui_out_new): Likewise.
* ui-out.c (ui_out_test_flags): Likewise.
(ui_out_new): Likewise.
* cli-out.c (cli_out_new): Update variable type.
* mi/mi-out.c (mi_out_new): Likewise.
* tui/tui-out.c (tui_out_new): Likewise.
2016-12-02 Pedro Alves <palves@redhat.com>
* NEWS: Mention that user commands now accept an unlimited number
of arguments.
* cli/cli-script.c: Include <vector>.
(struct string_view): New type.
(MAXUSERARGS): Delete.
(struct user_args): Now a C++ class.
(user_args_stack): New.
(struct scoped_user_args_level): New type.
(execute_user_command): Use scoped_user_args_level.
(arg_cleanup): Delete.
(setup_user_args): Deleted, and refactored as ...
(user_args::user_args): ... this new constructor. Limit of number
of arguments removed.
(insert_user_defined_cmd_args): Defer to user_args_stack.
(user_args::insert_args): New, bits based on old
insert_user_defined_cmd_args with limit of number of arguments
eliminated.
2016-12-02 Pedro Alves <palves@redhat.com>
PR cli/20559
* NEWS: Mention "eval" expands user-defined command arguments.
* cli/cli-script.c (execute_control_command): Adjust to rename.
(insert_args): Rename to ...
(insert_user_defined_cmd_args): ... this, and make extern.
* cli/cli-script.h (insert_user_defined_cmd_args): New
declaration.
* printcmd.c: Include "cli/cli-script.h".
(eval_command): Call insert_user_defined_cmd_args.
2016-12-02 Tom Tromey <tom@tromey.com>
PR symtab/16264:
* dwarf2read.c (struct partial_die_info) <main_subprogram>: New
member.
(add_partial_symbol): Call set_objfile_main_name.
(read_partial_die): Handle DW_AT_main_subprogram.
<DW_AT_calling_convention>: don't call set_objfile_main_name, but
set main_subprogram flag.
2016-12-02 Simon Marchi <simon.marchi@ericsson.com>
* tracefile-tfile.c (tfile_write_status): Adjust to renames.
* tracefile.c (trace_save_command): Rename to...
(tsave_command): ...this.
(_initialize_tracefile): Adjust to renames.
* tracepoint.c (trace_actions_command): Rename to...
(actions_command): ...this.
(trace_start_command): Rename to...
(tstart_command): ...this, and adjust to renames..
(trace_stop_command): Rename to...
(tstop_command): ...this.
(trace_status_command): Rename to...
(tstatus_command): ...this, and adjust to renames.
(trace_find_command): Rename to...
(tfind_command): ...this.
(trace_find_pc_command): Rename to...
(tfind_pc_command): ...this.
(trace_find_tracepoint_command): Rename to...
(tfind_tracepoint_command): ...this.
(trace_find_line_command): Rename to...
(tfind_line_command): ...this.
(trace_find_range_command): Rename to...
(tfind_range_command): ...this.
(trace_find_outside_command): Rename to...
(tfind_outside_command): ...this.
(trace_dump_command): Rename to...
(tdump_command): ...this.
(tfind_1): Adjust to renames.
(trace_find_end_command): Rename to...
(tfind_end_command): ...this, and adjust to renames..
(trace_status_mi): Adjust to renames.
(parse_trace_status): Adjust to renames.
(_initialize_tracepoint): Adjust to renames.
* tracepoint.h (enum trace_stop_reason) <tstop_command>: Rename
to...
<trace_stop_command>: ...this.
2016-12-02 Simon Marchi <simon.marchi@ericsson.com>
* mi/mi-out.c (mi_ui_out_data) <suppress_output>: Remove.
(mi_table_body): Remove suppress_output check.
(mi_table_end): Likewise.
(mi_table_header): Likewise.
(mi_begin): Likewise.
(mi_end): Likewise.
(mi_field_int): Likewise.
(mi_field_string): Likewise.
(mi_field_fmt): Likewise.
(mi_out_data_ctor): Likewise.
2016-12-02 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_analyze_prologue): Recognize STR
instruction.
(aarch64_analyze_prologue_test): More tests.
2016-12-02 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c: Include "selftest.h".
(abstract_instruction_reader): New class.
(instruction_reader): New class.
(aarch64_analyze_prologue): Add new parameter reader. Call
reader.read instead of read_memory_unsigned_integer.
[GDB_SELF_TEST] (instruction_reader_test): New class.
(aarch64_analyze_prologue_test): New function.
(_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register
selftests::aarch64_analyze_prologue_test.
* trad-frame.c (trad_frame_cache_zalloc):
(trad_frame_alloc_saved_regs): Add a new function.
* trad-frame.h (trad_frame_alloc_saved_regs): Declare.
2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (enum ui_out_table_state): Move to class
ui_out_table as ui_out_table::state.
(struct ui_out_table): Change to ...
(class ui_out_table): ... this.
<flag>: Remove.
<entry_level>: Rename to ...
<m_entry_level>: ... this.
<columns>: Rename to ...
<m_nr_cols>: ... this.
<id>: Rename to ...
<m_id>: ... this.
<headers>: Rename to ...
<m_headers>: ... this.
<headers_iterator>: Rename to ...
<m_headers_iterator>: ... this.
<start_body, append_header, start_row, get_next_header,
query_field, current_state, entry_level>: New methods.
(struct ui_out) <table>: Change type to unique_ptr to
ui_out_table.
(append_header_to_list, get_next_header, clear_header_list,
clear_table): Remove.
(ui_out_table_begin): Instantiate ui_out_table object. Update
table check.
(ui_out_table_body): Update table check, replace code with call
to ui_out_table::start_body.
(ui_out_table_end): Update table check, replace manual cleanup
with assignment of uiout->table unique_ptr to nullptr.
(ui_out_table_header): Update table check, replace call to
append_header_to_list with call to append_header method.
(ui_out_begin): Remove one table state check, update another.
Replace code with call to start_row method.
(verify_field): Update table checks.
(ui_out_query_field): Update table check, replace code with call
to query_field method.
(ui_out_new): Remove table initialization code.
2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (enum ui_out_table_state): New enum.
(struct ui_out_table) <body_flag>: Remove field.
<state>: New field.
(ui_out_table_begin): Replace usages of body_flag with state.
(ui_out_table_body): Likewise.
(ui_out_table_end): Likewise.
(ui_out_table_header): Likewise.
(ui_out_begin): Likewise.
(verify_field): Likewise.
(ui_out_new): Likewise.
2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.h (ui_out_begin_ftype): Remove level parameter.
(ui_out_end_ftype): Likewise.
* ui-out.c (struct ui_out) <level>: Replace field with a method
that dynamically computes the result.
(current_level): Get vector's back item instead of using
uiout->level.
(push_level): Make return type void.
(pop_level): Make return type void and update access to
ui_out::level.
(uo_begin): Remove level parameter.
(uo_end): Likewise.
(ui_out_table_begin): Update access to uiout::level.
(ui_out_begin): Don't read return value from push_level, call
uiout->level() instead, update call to uo_begin.
(ui_out_end): Don't read return value from pop_level, update
call to uo_end.
(verify_field): Update access to uiout->level.
(ui_out_new): Don't initialize ui_out::level, call push_level
to push the initial level instead of doing it by hand.
* cli-out.c (cli_begin): Remove level parameter.
(cli_end): Likewise.
* mi/mi-out.c (mi_begin): Likewise.
(mi_end): Likewise.
2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (struct ui_out_level): Replace with ...
(class ui_out_level): ... this.
(current_level): Update.
(push_level): Update.
(pop_level): Update.
(verify_field): Update.
(ui_out_new): Update.
2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (struct ui_out_hdr): Replace with ...
(class ui_out_hdr): ... this.
(append_header_to_list): Update.
(get_next_header): Update.
(ui_out_query_field): Update.
2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
* mi/mi-out.c (mi_table_header): Change char * args to
std::string.
* cli-out.c (cli_table_header): Likewise.
* ui-out.h (table_header_ftype): Likewise.
(ui_out_table_header): Constify colhdr argument.
(ui_out_query_field): Constify col_name argument.
* ui-out.c (ui_out_hdr) <col_name, colhdr>: Change type to
std::string.
(uo_table_header): Change char * args to std::string.
(ui_out_table_header): Likewise.
(get_next_header): Constify colhdr argument and adapt.
(clear_header_list): Don't free col_name/colhdr fields.
(append_header_to_list): Change char * args to std::string and
adapt.
(verify_field): Constify variable.
(ui_out_query_field): Constify col_name argument and adapt.
* breakpoint.c (wrap_indent_at_field): Constify variable.
2016-12-01 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (struct ui_out_hdr) <next>: Remove.
(struct ui_out_table) <header_first, header_last, header_next>: Remove.
<headers, headers_iterator>: New fields.
(ui_out_table_body): Update for the new data structure.
(ui_out_begin): Likewise.
(clear_header_list): Likewise.
(append_header_to_list): Likewise.
(get_next_header): Likewise.
(ui_out_query_field): Likewise.
(ui_out_new): Likewise.
2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (struct ui_out_table) <id>: Change type to
std::string.
(ui_out_table_begin): Change tblid parameter type to
std::string, adapt code.
update following type change.
(clear_table): Update.
(ui_out_new): Update.
2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
* cli-out.h (cli_ui_out_data) <streams>: Change type to
std::vector.
* cli-out.c: Remove vec.h include.
(cli_uiout_dtor): Update.
(cli_field_fmt): Update.
(cli_spaces): Update.
(cli_text): Update.
(cli_message): Update.
(cli_flush): Update.
(cli_redirect): Update.
(out_field_fmt): Update.
(field_separator): Update.
(cli_out_data_ctor): Update.
(cli_out_new): Update.
(cli_out_set_stream): Update.
2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
* mi/mi-out.c: Remove vec.h include.
(mi_ui_out_data) <streams>: Change type to std::vector.
(mi_field_string): Update.
(mi_field_fmt): Update.
(mi_flush): Update.
(mi_redirect): Update.
(field_separator): Update.
(mi_open): Update.
(mi_close): Update.
(mi_out_buffered): Update.
(mi_out_rewind): Update.
(mi_out_put): Update.
(mi_out_data_ctor): Update.
(mi_out_data_dtor): Don't free streams.
2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (ui_out_level_p): Remove typedef.
(DEF_VEC_P (ui_out_level_p)): Remove definition.
(struct ui_out) <levels>: Change type to vector of unique_ptr of
ui_out_level.
(current_level): Update.
(push_level): Update.
(pop_level): Update, don't manually delete the ui_out_level
instance.
(ui_out_new): Update.
2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
* cli-out.c (cli_uiout_dtor): Use delete instead of xfree.
(cli_out_new): Use new instead of XNEW.
* mi/mi-out.c (mi_out_data_dtor): Use delete instead of xfree.
(mi_out_new): Use new instead of XNEW.
* tui/tui-out.c (tui_out_new): Likewise.
* ui-out.c (push_level): Likewise.
(pop_level): Use delete instead of xfree.
(clear_header_list): Use delete instead of xfree.
(append_header_to_list): Use new instead of XNEW.
(ui_out_new): Likewise.
2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
* disable-implicit-rules.mk: New file.
* Makefile.in: Include disable-implicit-rules.mk.
* data-directory/Makefile.in: Likewise.
* gnulib/Makefile.in: Likewise.
2016-11-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_scan_prologue): Read memory as unsigned integer.
(arm_exidx_unwind_sniffer): Likewise.
2016-11-28 Simon Marchi <simon.marchi@polymtl.ca>
* record-full.c (record_full_open_1): Fix debug output.
2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
* mi/mi-out.c (mi_message): Remove verbosity argument.
* ada-tasks.c (print_ada_task_info, info_task, task_command):
Update call.
* auto-load.c (auto_load_info_scripts): Likewise.
* breakpoint.c (breakpoint_1, watchpoints_info, tracepoints_info):
Likewise.
* cli-out.c (cli_message): Remove verbosity argument.
* inferior.c (print_inferior): Update call.
* linux-thread-db.c (info_auto_load_libthread_db): Likewise.
* probe.c (info_probes_for_ops): Likewise.
* skip.c (skip_info): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* symfile.c (load_progress): Likewise.
* thread.c (print_thread_info_1): Likewise.
* ui-out.c (uo_message, ui_out_message): Remove verbosity argument.
(ui_out_get_verblvl): Remove.
* ui-out.h (ui_out_message): Remove verbosity argument.
(ui_out_get_verblvl): Remove.
(message_ftype): Remove verbosity argument.
2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
* mi/mi-out.c (mi_wrap_hint): Constify argument.
* cli-out.c (cli_wrap_hint): Likewise.
* ui-out.c (ui_out_wrap_hint, uo_wrap_hint): Likewise.
* ui-out.h (ui_out_wrap_hint, wrap_hint_ftype): Likewise.
* utils.c (wrap_here): Likewise.
(wrap_indent): Constify.
* utils.h (wrap_here): Constify argument.
2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (uo_redirect): Return the return value from the
implementation function.
2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (ui_out_destroy, uo_data_destroy): Remove.
* ui-out.h (ui_out_destroy): Remove.
2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
* mi/mi-out.c (ui_out_data): Rename to ...
(mi_ui_out_data): ... this.
2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (_initialize_ui_out): Remove.
(ui_out_set_flags): Remove.
(ui_out_clear_flags): Remove.
* ui-out.h (ui_out_begin_cleanup_end): Remove.
(ui_out_begin_cleanup_end): Remove.
(ui_out_set_flags): Remove.
(ui_out_clear_flags): Remove.
* mi/mi-out.c (_initialize_mi_out): Remove.
(mi_out_buffered): Remove.
* mi/mi-out.h (mi_out_buffered): Remove.
2016-11-26 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.h (struct ui_out_impl): Remove comment.
* ui-out.c (struct ui_out): Remove comment.
2016-11-25 John Baldwin <jhb@FreeBSD.org>
* contrib/ari/gdb_ari.sh (no parameter function): Remove check.
2016-11-25 Simon Marchi <simon.marchi@ericsson.com>
* Makefile.in: Fix typo.
2016-11-25 Simon Marchi <simon.marchi@ericsson.com>
* record-full.c (record_full_resume): Fix typos in comment.
2016-11-25 Simon Marchi <simon.marchi@ericsson.com>
* infcmd.c (interrupt_command): Fix typo in comment.
2016-11-24 John Baldwin <jhb@FreeBSD.org>
* ada-lang.c (create_excep_cond_exprs): Do not use 'std::move'.
* ax-gdb.c (agent_eval_command_one): Likewise.
(agent_eval_command_one): Likewise.
* breakpoint.c (parse_cond_to_aexpr): Likewise.
(parse_cmd_to_aexpr): Likewise.
* dtrace-probe.c (dtrace_process_dof_probe): Likewise.
* parse.c (parse_expression_for_completion): Likewise.
2016-11-24 John Baldwin <jhb@FreeBSD.org>
* common/new-op.c (operator new): Mark 'noexcept'.
(operator new[]): Likewise.
2016-11-24 Andreas Arnez <arnez@linux.vnet.ibm.com>
* dwarf2loc.c (copy_bitwise): Use memcpy for the middle part, if
it is byte-aligned.
2016-11-24 Andreas Arnez <arnez@linux.vnet.ibm.com>
Pedro Alves <palves@redhat.com>
* dwarf2loc.c (bits_to_str, check_copy_bitwise)
(copy_bitwise_tests): New functions.
(_initialize_dwarf2loc): Register the new function
copy_bitwise_tests as a unit test.
* selftest.c (run_self_tests): Improve the failure message's
wording and formatting.
2016-11-24 Andreas Arnez <arnez@linux.vnet.ibm.com>
* dwarf2loc.c (extract_bits_primitive): Remove.
(extract_bits): Remove.
(copy_bitwise): Rewrite. Fixes a possible corruption that may
occur for non-byte-aligned copies.
2016-11-24 Andreas Arnez <arnez@linux.vnet.ibm.com>
PR gdb/12616
* dwarf2read.c (dwarf2_add_field): Handle the DWARF V4 attribute
DW_AT_data_bit_offset.
2016-11-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/run-time-clock.c.
(HFILES_NO_SRCDIR): Add common/run-time-clock.h.
(COMMON_OBS): Add run-time-clock.o.
* common/run-time-clock.c, common/run-time-clock.h: New files.
* defs.h (struct timeval, print_transfer_performance): Delete
declarations.
* event-loop.c (struct gdb_timer) <when>: Now a
std::chrono::steady_clock::time_point.
(create_timer): use std::chrono::steady_clock instead of
gettimeofday. Use new instead of malloc.
(delete_timer): Use delete instead of xfree.
(duration_cast_timeval): New.
(update_wait_timeout): Use std::chrono::steady_clock instead of
gettimeofday.
* maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h>
and "timeval-utils.h".
(scoped_command_stats::~scoped_command_stats)
(scoped_command_stats::scoped_command_stats): Use
std::chrono::steady_clock instead of gettimeofday. Use
user_cpu_time_clock instead of get_run_time.
* maint.h: Include "run-time-clock.h" and <chrono>.
(scoped_command_stats): <m_start_cpu_time>: Now a
user_cpu_time_clock::time_point.
<m_start_wall_time>: Now a std::chrono::steady_clock::time_point.
* mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of
"gdb_sys_time.h" and <sys/resource.h>.
(rusage): Delete.
(mi_execute_command): Use new instead of XNEW.
(mi_load_progress): Use std::chrono::steady_clock instead of
gettimeofday.
(timestamp): Rewrite in terms of std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
(timeval_diff): Delete.
(print_diff): Adjust to use std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
* mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead
of "gdb_sys_time.h".
(struct mi_timestamp): Change fields types to
std::chrono::steady_clock::time_point, user_cpu_time_clock::time
and system_cpu_time_clock::time_point, instead of struct timeval.
* symfile.c: Include <chrono> instead of <time.h> and
"gdb_sys_time.h".
(struct time_range): New.
(generic_load): Use std::chrono::steady_clock instead of
gettimeofday.
(print_transfer_performance): Replace timeval parameters with a
std::chrono::steady_clock::duration parameter. Adjust.
* utils.c: Include <chrono> instead of "timeval-utils.h",
"gdb_sys_time.h", and <time.h>.
(prompt_for_continue_wait_time): Now a
std::chrono::steady_clock::duration.
(defaulted_query, prompt_for_continue): Use
std::chrono::steady_clock instead of
gettimeofday/timeval_sub/timeval_add.
(reset_prompt_for_continue_wait_time): Use
std::chrono::steady_clock::duration instead of struct timeval.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
(vfprintf_unfiltered): Use std::chrono::steady_clock instead of
gettimeofday. Use std::string. Use '.' instead of ':'.
* utils.h: Include <chrono>.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
2016-11-22 Simon Marchi <simon.marchi@polymtl.ca>
* Makefile.in: Fix whitespace formatting.
2016-11-22 Simon Marchi <simon.marchi@polymtl.ca>
* Makefile.in (ALL_64_TARGET_OBS, ALL_TARGET_OBS,
HFILES_NO_SRCDIR, ALLDEPFILES): Rename files.
* alphabsd-nat.c: Rename to ...
* alpha-bsd-nat.c: ... this, adjust include.
* alphabsd-tdep.c: Rename to ...
* alpha-bsd-tdep.c: ... this, adjust include.
* alphabsd-tdep.h: Rename to ...
* alpha-bsd-tdep.h: ... this, adjust include barrier and comment.
* alphafbsd-tdep.c: Rename to ...
* alpha-fbsd-tdep.c: ... this.
* alphanbsd-tdep.c: Rename to ...
* alpha-nbsd-tdep.c: ... this, adjust include.
* alphaobsd-tdep.c: Rename to ...
* alpha-obsd-tdep.c: ... this, adjust include.
* amd64bsd-nat.c: Rename to ...
* amd64-bsd-nat.c: ... this, adjust include.
* amd64fbsd-nat.c: Rename to ...
* amd64-fbsd-nat.c: ... this, adjust include.
* amd64fbsd-tdep.c: Rename to ...
* amd64-fbsd-tdep.c: ... this, adjust include.
* amd64nbsd-nat.c: Rename to ...
* amd64-nbsd-nat.c: ... this.
* amd64nbsd-tdep.c: Rename to ...
* amd64-nbsd-tdep.c: ... this.
* amd64obsd-nat.c: Rename to ...
* amd64-obsd-nat.c: ... this.
* amd64obsd-tdep.c: Rename to ...
* amd64-obsd-tdep.c: ... this.
* amd64-tdep.h: Update comments.
* armbsd-tdep.c: Rename to ...
* arm-bsd-tdep.c: ... this.
* armnbsd-nat.c: Rename to ...
* arm-nbsd-nat.c: ... this.
* armnbsd-tdep.c: Rename to ...
* arm-nbsd-tdep.c: ... this.
* armobsd-tdep.c: Rename to ...
* arm-obsd-tdep.c: ... this.
* arm-tdep.h: Update comments.
* hppabsd-tdep.c: Rename to ...
* hppa-bsd-tdep.c: ... this, adjust include.
* hppabsd-tdep.h: Rename to ...
* hppa-bsd-tdep.h: ... this, adjust include barrier and comment.
* hppanbsd-nat.c: Rename to ...
* hppa-nbsd-nat.c: ... this.
* hppanbsd-tdep.c: Rename to ...
* hppa-nbsd-tdep.c: ... this, adjust include.
* hppaobsd-nat.c: Rename to ...
* hppa-obsd-nat.c: ... this.
* hppaobsd-tdep.c: Rename to ...
* hppa-obsd-tdep.c: ... this, adjust include.
* i386bsd-nat.c: Rename to ...
* i386-bsd-nat.c: ... this, adjust include.
* i386bsd-nat.h: Rename to ...
* i386-bsd-nat.h: ... this, adjust include barrier and comment.
* i386bsd-tdep.c: Rename to ...
* i386-bsd-tdep.c: ... this.
* i386fbsd-nat.c: Rename to ...
* i386-fbsd-nat.c: ... this, adjust include.
* i386fbsd-tdep.c: Rename to ...
* i386-fbsd-tdep.c: ... this, adjust include.
* i386fbsd-tdep.h: Rename to ...
* i386-fbsd-tdep.h: ... this, adjust include barrier and comment.
* i386gnu-nat.c: Rename to ...
* i386-gnu-nat.c: ... this.
* i386gnu-tdep.c: Rename to ...
* i386-gnu-tdep.c: ... this.
* i386nbsd-nat.c: Rename to ...
* i386-nbsd-nat.c: ... this, adjust include.
* i386nbsd-tdep.c: Rename to ...
* i386-nbsd-tdep.c: ... this.
* i386obsd-nat.c: Rename to ...
* i386-obsd-nat.c: ... this, adjust include.
* i386obsd-tdep.c: Rename to ...
* i386-obsd-tdep.c: ... this.
* i386v4-nat.c: Rename to ...
* i386-v4-nat.c: ... this.
* i386-tdep.h: Update comments.
* m68k-tdep.h: Update comments.
* m68kbsd-nat.c: Rename to ...
* m68k-bsd-nat.c: ... this.
* m68kbsd-tdep.c: Rename to ...
* m68k-bsd-tdep.c: ... this.
* m68klinux-nat.c: Rename to ...
* m68k-linux-nat.c: ... this.
* m68klinux-tdep.c: Rename to ...
* m68k-linux-tdep.c: ... this.
* m88kbsd-nat.c: Rename to ...
* m88k-bsd-nat.c: ... this.
* mipsnbsd-nat.c: Rename to ...
* mips-nbsd-nat.c: ... this, adjust include.
* mipsnbsd-tdep.c: Rename to ...
* mips-nbsd-tdep.c: ... this, adjust include.
* mipsnbsd-tdep.h: Rename to ...
* mips-nbsd-tdep.h: ... this, adjust include barrier and comment.
* mips64obsd-nat.c: Rename to ...
* mips64-obsd-nat.c: ... this.
* mips64obsd-tdep.c: Rename to ...
* mips64-obsd-tdep.c: ... this.
* ppcfbsd-nat.c: Rename to ...
* ppc-fbsd-nat.c: ... this, adjust include.
* ppcfbsd-tdep.c: Rename to ...
* ppc-fbsd-tdep.c: ... this, adjust include.
* ppcfbsd-tdep.h: Rename to ...
* ppc-fbsd-tdep.h: ... this, adjust include barrier and comment.
* ppcnbsd-nat.c: Rename to ...
* ppc-nbsd-nat.c: ... this, adjust include.
* ppcnbsd-tdep.c: Rename to ...
* ppc-nbsd-tdep.c: ... this, adjust include.
* ppcnbsd-tdep.h: Rename to ...
* ppc-nbsd-tdep.h: ... this, adjust include barrier and comment.
* ppcobsd-nat.c: Rename to ...
* ppc-obsd-nat.c: ... this, adjust include.
* ppcobsd-tdep.c: Rename to ...
* ppc-obsd-tdep.c: ... this, adjust include.
* ppcobsd-tdep.h: Rename to ...
* ppc-obsd-tdep.h: ... this, adjust include barrier and comment.
* shnbsd-nat.c: Rename to ...
* sh-nbsd-nat.c: ... this.
* shnbsd-tdep.c: Rename to ...
* sh-nbsd-tdep.c: ... this.
* sparcnbsd-nat.c: Rename to ...
* sparc-nbsd-nat.c: ... this.
* sparcnbsd-tdep.c: Rename to ...
* sparc-nbsd-tdep.c: ... this.
* sparcobsd-tdep.c: Rename to ...
* sparc-obsd-tdep.c: ... this.
* sparc64fbsd-nat.c: Rename to ...
* sparc64-fbsd-nat.c: ... this.
* sparc64fbsd-tdep.c: Rename to ...
* sparc64-fbsd-tdep.c: ... this.
* sparc64nbsd-nat.c: Rename to ...
* sparc64-nbsd-nat.c: ... this.
* sparc64nbsd-tdep.c: Rename to ...
* sparc64-nbsd-tdep.c: ... this.
* sparc64obsd-nat.c: Rename to ...
* sparc64-obsd-nat.c: ... this.
* sparc64obsd-tdep.c: Rename to ...
* sparc64-obsd-tdep.c: ... this.
* sparc64-tdep.h: Update comments.
* vaxbsd-nat.c: Rename to ...
* vax-bsd-nat.c: ... this.
* vaxnbsd-tdep.c: Rename to ...
* vax-nbsd-tdep.c: ... this.
* vaxobsd-tdep.c: Rename to ...
* vax-obsd-tdep.c: ... this.
* x86bsd-nat.h: Rename to ...
* x86-bsd-nat.h: ... this, adjust include barrier and comment.
* x86bsd-nat.c: Rename to ...
* x86-bsd-nat.c: ... this, adjust include.
* configure.tgt: Update renamed files.
* config/alpha/fbsd.mh: Update renamed files.
* config/alpha/nbsd.mh: Update renamed files.
* config/arm/nbsdelf.mh: Update renamed files.
* config/djgpp/fnchange.lst: Update renamed files.
* config/i386/fbsd.mh: Update renamed files.
* config/i386/fbsd64.mh: Update renamed files.
* config/i386/i386gnu.mh: Update renamed files.
* config/i386/i386sol2.mh: Update renamed files.
* config/i386/nbsd64.mh: Update renamed files.
* config/i386/nbsdelf.mh: Update renamed files.
* config/i386/obsd.mh: Update renamed files.
* config/i386/obsd64.mh: Update renamed files.
* config/i386/sol2-64.mh: Update renamed files.
* config/m68k/linux.mh: Update renamed files.
* config/m68k/nbsdelf.mh: Update renamed files.
* config/m68k/obsd.mh: Update renamed files.
* config/m88k/obsd.mh: Update renamed files.
* config/mips/nbsd.mh: Update renamed files.
* config/mips/obsd64.mh: Update renamed files.
* config/pa/nbsd.mh: Update renamed files.
* config/pa/obsd.mh: Update renamed files.
* config/powerpc/fbsd.mh: Update renamed files.
* config/powerpc/nbsd.mh: Update renamed files.
* config/powerpc/obsd.mh: Update renamed files.
* config/sh/nbsd.mh: Update renamed files.
* config/sparc/fbsd.mh: Update renamed files.
* config/sparc/nbsd64.mh: Update renamed files.
* config/sparc/nbsdelf.mh: Update renamed files.
* config/sparc/obsd64.mh: Update renamed files.
* config/vax/nbsdelf.mh: Update renamed files.
* config/vax/obsd.mh: Update renamed files.
2016-11-22 Simon Marchi <simon.marchi@polymtl.ca>
* Makefile.in: Add comment about file lists ordering.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_MI_OBS, SUBDIR_MI_SRCS,
SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_GCC_COMPILE_OBS,
SUBDIR_GCC_COMPILE_SRCS, SUBDIR_GUILE_OBS, SUBDIR_GUILE_SRCS,
SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS, SUBDIR_GDBTK_OBS,
SUBDIR_GDBTK_SRCS, XMLFILES, REMOTE_OBS, ALL_64_TARGET_OBS,
ALL_TARGET_OBS, SFILES, HFILES_NO_SRCDIR, HFILES_WITH_SRCDIR,
COMMON_OBS, YYFILES, YYOBJ, generated_files, ALLDEPFILES):
Flatten list and order alphabetically.
* data-directory/Makefile.in: Add comment about file lists
ordering.
(GEN_SYSCALLS_FILES, PYTHON_FILE_LIST): Flatten list and order
alphabetically.
2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com>
* contrib/expect-read1.sh: Fix spelling in comments.
* gdb_buildall.sh: Fix spelling in comments.
* gdb_mbuild.sh: Fix spelling in comments.
2016-11-22 Ambrogino Modigliani <ambrogino.modigliani@gmail.com>
* configure.ac: Fix spelling in comments.
* configure: Regenerate.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* gdbarch.sh (software_single_step): Change parameter from frame_info
to regcache.
* gdbarch.c, gdbarch.h: Regenerated.
* aarch64-tdep.c (aarch64_software_single_step): Change parameter
from frame_info to regcache. Don't call get_current_regcache.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
(alpha_software_single_step): Likewise.
* alpha-tdep.h (alpha_software_single_step): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Likewise.
* arm-tdep.c (arm_software_single_step): Likewise.
* arm-tdep.h (arm_software_single_step): Likewise.
* breakpoint.c (insert_single_step_breakpoint): Pass regcache to
gdbarch_software_single_step.
* cris-tdep.c (cris_software_single_step): Change parameter from
frame_info to regcache. Don't call get_current_regcache.
* mips-tdep.c (mips_software_single_step): Likewise.
* mips-tdep.h (mips_software_single_step): Update declaration.
* moxie-tdep.c (moxie_software_single_step): Likewise.
* nios2-tdep.c (nios2_software_single_step): Likewise.
* ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration.
* rs6000-aix-tdep.c (rs6000_software_single_step): Likewise.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
* s390-linux-tdep.c (s390_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* spu-tdep.c (spu_software_single_step): Likewise.
* tic6x-tdep.c (tic6x_software_single_step): Likewise.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* spu-tdep.c (spu_software_single_step): Call get_regcache_arch
instead of get_frame_arch. Call regcache_read_pc instead of
get_frame_pc. Call regcache_raw_get_unsigned instead of
get_frame_register_unsigned.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* tic6x-tdep.c (tic6x_condition_true): Replace frame with
regcache. Call regcache_raw_get_signed instead of
get_frame_register_signed.
(tic6x_get_next_pc): Likewise. Caller updated.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* rs6000-aix-tdep.c (branch_dest): Replace parameter frame with
regcache. Call get_regcache_arch instead of get_frame_arch.
Call regcache_raw_get_unsigned instead of
get_frame_register_unsigned.
(rs6000_software_single_step): Likewise.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Call
get_regcache_arch instead of get_frame_arch. Call
regcache_read_pc instead of get_frame_pc.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* s390-linux-tdep.c (s390_software_single_step): Call
get_regcache_arch instead of get_frame_arch. Call
regcache_read_pc instead of get_frame_pc.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* sparc-tdep.c (sparc_analyze_control_transfer): Replace parameter
frame with regcache. Call get_current_frame.
(sparc_software_single_step): Call get_regcache_arch instead of
get_frame_arch. Call regcache_raw_get_unsigned instead of
get_frame_register_unsigned.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* nios2-tdep.c (nios2_get_next_pc): Replace parameter frame
with regcache. Call regcache_raw_get_signed instead of
get_frame_register_unsigned.
(nios2_software_single_step): Call get_regcache_arch
instead of get_frame_arch.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* moxie-tdep.c (moxie_software_single_step): Call
get_regcache_arch instead of get_frame_arch. Call
regcache_read_pc instead of get_frame_pc.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* mips-tdep.c (mips32_bc1_pc): Replace parameter frame with
regcache. Call regcache_raw_get_unsigned instead of
get_frame_register_unsigned.
(mips32_next_pc): Likewise.
(micromips_bc1_pc): Likewise.
(micromips_next_pc): Likewise.
(extended_mips16_next_pc): Likewise.
(mips16_next_pc): Likewise.
(mips_next_pc): Likewise.
(mips_software_single_step): Call get_regcache_arch instead
of get_frame_arch.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* cris-tdep.c (find_step_target): Replace parameter frame
with regcache. Call get_regcache_arch instead of
get_frame_arch. Call regcache_raw_get_unsigned instead of
get_frame_register_unsigned.
(cris_software_single_step): Call get_regcache_arch instead
of get_frame_arch.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Call
get_regcache_arch instead of get_frame_arch. Call
regcache_read_pc instead of get_frame_pc.
(alpha_next_pc): Replace parameter frame with regcache.
Call regcache_raw_get_unsigned instead of
get_frame_register_unsigned.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Call
get_regcache_arch instead of get_frame_arch. Call
regcache_read_pc instead of get_frame_pc.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_raw_get_signed): New function.
* regcache.h (regcache_raw_get_signed): Declare.
2016-11-22 Yao Qi <yao.qi@linaro.org>
* value.c (value_from_component): Use VALUE_NEXT_FRAME_ID
instead of VALUE_FROM_ID.
2016-11-21 Simon Marchi <simon.marchi@ericsson.com>
* Makefile.in (%o: $(srcdir)/mi/%.c): Add missing POSTCOMPILE
step.
2016-11-21 Yao Qi <yao.qi@linaro.org>
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
Don't call value_from_contents_and_address and
set_value_address. Call value_from_component.
* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
Likewise.
* value.c (value_from_component): New function.
* value.h (value_from_component): Likewise.
* valarith.c (value_subscripted_rvalue): Call
value_from_component.
2016-11-19 Joel Brobecker <brobecker@adacore.com>
* contrib/ari/gdb_ari.sh: Add detection of printf_vma and
sprintf_vma.
2016-11-18 Simon Marchi <simon.marchi@polymtl.ca>
* Makefile.in (%.o: $(srcdir)/gdbtk/generic/%.c): Fix typo.
2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
(PYTHON_CFLAGS): Move up.
(%.o: $(srcdir)/arch/%.c): New rule.
(%.o: $(srcdir)/cli/%.c): New rule.
(%.o: $(srcdir)/common/%.c): New rule.
(%.o: $(srcdir)/compile/%.c): New rule.
(%.o: $(srcdir)/gdbtk/generic/%.c): New rule.
(%.o: $(srcdir)/guile/%.c): New rule.
(%.o: $(srcdir)/mi/%.c): New rule.
(%.o: $(srcdir)/nat/%.c): New rule.
(%.o: $(srcdir)/python/%.c): New rule.
(%.o: $(srcdir)/target/%.c): New rule.
(%.o: $(srcdir)/tui/%.c): New rule.
(cli-cmds.o): Remove.
(cli-decode.o): Likewise.
(cli-dump.o): Likewise.
(cli-interp.o): Likewise.
(cli-logging.o): Likewise.
(cli-script.o): Likewise.
(cli-setshow.o): Likewise.
(cli-utils.o): Likewise.
(compile.o): Likewise.
(compile-c-types.o): Likewise.
(compile-c-symbols.o): Likewise.
(compile-object-load.o): Likewise.
(compile-object-run.o): Likewise.
(compile-loc2c.o): Likewise.
(compile-c-support.o): Likewise.
(gdbtk.o): Likewise.
(gdbtk-bp.o): Likewise.
(gdbtk-cmds.o): Likewise.
(gdbtk-hooks.o): Likewise.
(gdbtk-interp.o): Likewise.
(gdbtk-main.o): Likewise.
(gdbtk-register.o): Likewise.
(gdbtk-stack.o): Likewise.
(gdbtk-varobj.o): Likewise.
(gdbtk-wrapper.o): Likewise.
(mi-cmd-break.o): Likewise.
(mi-cmd-catch.o): Likewise.
(mi-cmd-disas.o): Likewise.
(mi-cmd-env.o): Likewise.
(mi-cmd-file.o): Likewise.
(mi-cmd-info.o): Likewise.
(mi-cmds.o): Likewise.
(mi-cmd-stack.o): Likewise.
(mi-cmd-target.o): Likewise.
(mi-cmd-var.o): Likewise.
(mi-console.o): Likewise.
(mi-getopt.o): Likewise.
(mi-interp.o): Likewise.
(mi-main.o): Likewise.
(mi-out.o): Likewise.
(mi-parse.o): Likewise.
(mi-symbol-cmds.o): Likewise.
(mi-common.o): Likewise.
(signals.o): Likewise.
(common-utils.o): Likewise.
(gdb_vecs.o): Likewise.
(xml-utils.o): Likewise.
(ptid.o): Likewise.
(buffer.o): Likewise.
(filestuff.o): Likewise.
(format.o): Likewise.
(vec.o): Likewise.
(print-utils.o): Likewise.
(rsp-low.o): Likewise.
(errors.o): Likewise.
(common-debug.o): Likewise.
(cleanups.o): Likewise.
(common-exceptions.o
(posix-strerror.o): Likewise.
(mingw-strerror.o): Likewise.
(btrace-common.o): Likewise.
(fileio.o): Likewise.
(common-regcache.o): Likewise.
(signals-state-save-restore.o): Likewise.
(new-op.o): Likewise.
(waitstatus.o): Likewise.
(arm.o): Likewise.
(arm-linux.o): Likewise.
(arm-get-next-pcs.o): Likewise.
(x86-dregs.o): Likewise.
(linux-btrace.o): Likewise.
(linux-osdata.o): Likewise.
(linux-procfs.o): Likewise.
(linux-ptrace.o): Likewise.
(linux-waitpid.o): Likewise.
(mips-linux-watch.o): Likewise.
(ppc-linux.o): Likewise.
(linux-personality.o): Likewise.
(x86-linux.o): Likewise.
(x86-linux-dregs.o): Likewise.
(amd64-linux-siginfo.o): Likewise.
(linux-namespaces.o): Likewise.
(aarch64-linux-hw-point.o): Likewise.
(aarch64-linux.o): Likewise.
(aarch64-insn.o): Likewise.
(tui.o): Likewise.
(tui-command.o): Likewise.
(tui-data.o): Likewise.
(tui-disasm.o): Likewise.
(tui-file.o): Likewise.
(tui-hooks.o): Likewise.
(tui-interp.o): Likewise.
(tui-io.o): Likewise.
(tui-layout.o): Likewise.
(tui-out.o): Likewise.
(tui-regs.o): Likewise.
(tui-source.o): Likewise.
(tui-stack.o): Likewise.
(tui-win.o): Likewise.
(tui-windata.o): Likewise.
(tui-wingeneral.o): Likewise.
(tui-winsource.o): Likewise.
(guile.o): Likewise.
(scm-arch.o): Likewise.
(scm-auto-load.o): Likewise.
(scm-block.o): Likewise.
(scm-breakpoint.o): Likewise.
(scm-cmd.o): Likewise.
(scm-disasm.o): Likewise.
(scm-exception.o): Likewise.
(scm-frame.o): Likewise.
(scm-gsmob.o): Likewise.
(scm-iterator.o): Likewise.
(scm-lazy-string.o): Likewise.
(scm-math.o): Likewise.
(scm-objfile.o): Likewise.
(scm-param.o): Likewise.
(scm-ports.o): Likewise.
(scm-pretty-print.o): Likewise.
(scm-progspace.o): Likewise.
(scm-safe-call.o): Likewise.
(scm-string.o): Likewise.
(scm-symbol.o): Likewise.
(scm-symtab.o): Likewise.
(scm-type.o): Likewise.
(scm-utils.o): Likewise.
(scm-value.o): Likewise.
(python.o): Likewise.
(py-arch.o): Likewise.
(py-auto-load.o): Likewise.
(py-block.o): Likewise.
(py-bpevent.o): Likewise.
(py-breakpoint.o): Likewise.
(py-cmd.o): Likewise.
(py-continueevent.o): Likewise.
(py-xmethods.o): Likewise.
(py-event.o): Likewise.
(py-evtregistry.o): Likewise.
(py-evts.o): Likewise.
(py-exitedevent.o): Likewise.
(py-finishbreakpoint.o): Likewise.
(py-frame.o): Likewise.
(py-framefilter.o): Likewise.
(py-function.o): Likewise.
(py-gdb-readline.o): Likewise.
(py-inferior.o): Likewise.
(py-infevents.o): Likewise.
(py-infthread.o): Likewise.
(py-lazy-string.o): Likewise.
(py-linetable.o): Likewise.
(py-newobjfileevent.o): Likewise.
(py-objfile.o): Likewise.
(py-param.o): Likewise.
(py-prettyprint.o): Likewise.
(py-progspace.o): Likewise.
(py-signalevent.o): Likewise.
(py-stopevent.o): Likewise.
(py-symbol.o): Likewise.
(py-symtab.o): Likewise.
(py-threadevent.o): Likewise.
(py-type.o): Likewise.
(py-unwind.o): Likewise.
(py-utils.o): Likewise.
(py-value.o): Likewise.
(py-varobj.o): Likewise.
2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
* Makefile.in (.c.o): Replace rule with ...
(%.o: %.c): ... this one.
(.po.gmo): Replace rule with ...
(%.gmo: %.po): ... this one.
(.po.pox): Replace rule with ...
(%.pox: %.po): ... this one.
(.y.c): Replace rule with ...
(%.c: %.y): ... this one.
(.l.c): Replace rule with ...
(%.c: %.l): ... this one.
(.SUFFIXES): Remove all instances.
2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
* NEWS: Mention requirement of GNU make.
2016-11-17 Pedro Alves <palves@redhat.com>
* c-exp.y (c_print_token): Use parser_fprintf instead of fprintf.
2016-11-17 Pedro Alves <palves@redhat.com>
* ctf.c [USE_WIN32API] (mkdir): Delete.
2016-11-16 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_value_primitive_packed_val): Use unique_ptr and
new gdb_byte[] instead of malloc and cleanups.
2016-11-17 Pedro Alves <palves@redhat.com>
* tracepoint.c (collection_list::add_memrange): Add gdbarch
parameter. Use paddress instead of printf_vma. Adjust recursive
calls.
(collection_list::stringify): Use paddress and phex_nz instead of
sprintf_vma. Adjust add_memrange call.
* tracepoint.h (collection_list::add_memrange): Add gdbarch
parameter.
2016-11-16 Kevin Buettner <kevinb@redhat.com>
* frame.c (get_prev_frame): Stash frame id for current frame
prior to computing frame id for previous frame.
2016-11-16 Kevin Buettner <kevinb@redhat.com>
* python/py-unwind.c (pending_framepy_read_register): Use
value_of_register() instead of get_frame_register_value().
2016-11-16 Kevin Buettner <kevinb@redhat.com>
* value.h (VALUE_FRAME_ID): Rename to VALUE_NEXT_FRAME_ID. Update
comment. Create new VALUE_FRAME_ID which is defined in terms of
VALUE_NEXT_FRAME_ID.
(deprecated_value_frame_id_hack): Rename to
deprecated_value_next_frame_id_hack.
* dwarf2loc.c, findvar.c, frame-unwind.c, sentinel-frame.c,
valarith.c, valops.c, value.c: Adjust nearly all occurences of
VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID. Add comments for those
which did not change.
* value.c (struct value): Rename frame_id field to next_frame_id.
Update comment.
(deprecated_value_frame_id_hack): Rename to
deprecated_value_next_frame_id_hack.
(value_fetch_lazy): Call frame_unwind_register_value()
instead of get_frame_register_value().
* frame.c (get_prev_frame_id_by_id): New function.
* frame.h (get_prev_frame_id_by_id): Declare.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Make
VALUE_NEXT_FRAME_ID refer to the next frame.
* findvar.c (value_of_register_lazy): Likewise.
(default_value_from_register): Likewise.
(value_from_register): Likewise.
* frame_unwind.c (frame_unwind_got_optimized): Likewise.
* sentinel-frame.c (sentinel_frame_prev_register): Likewise.
* value.h (VALUE_FRAME_ID): Update comment describing this macro.
2016-11-16 Kevin Buettner <kevinb@redhat.com>
* frame.h (enum frame_id_stack_status): Add FID_STACK_SENTINEL.
(struct frame_id): Increase number of bits required for storing
stack status to 3 from 2.
(sentinel_frame_id): New declaration.
(get_next_frame_sentinel_okay): Declare.
(frame_find_by_id_sentinel_okay): Declare.
* frame.c (current_frame): Rename this static global to...
(sentinel_frame): ...this static global, which has also been
moved an earlier location in the file.
(fprint_frame_id): Add case for sentinel frame id.
(get_frame_id): Return early for sentinel frame.
(sentinel_frame_id): Define.
(frame_find_by_id): Add case for sentinel_frame_id.
(create_sentinel_frame): Use sentinel_frame_id for this_id.value
instead of null_frame_id.
(get_current_frame): Add local declaration for `current_frame'.
Remove local declaration for `sentinel_frame.'
(get_next_frame_sentinel_okay): New function.
(reinit_frame_cache): Use `sentinel_frame' in place of
`current_frame'.
2016-11-15 Pedro Alves <palves@redhat.com>
* gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
38237baf99386101934cd93278023aa4ae523ec0.
* gnulib/configure, gnulib/config.in: Regenerate.
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/canonicalize-lgpl.c: Update.
* gnulib/import/extra/snippet/c++defs.h: Update.
* gnulib/import/m4/stdint.m4: Update.
* gnulib/import/m4/stdlib_h.m4: Update.
* gnulib/import/math.in.h: Update.
* gnulib/import/stdlib.in.h: Update.
* gnulib/import/sys_time.in.h: Update.
2016-11-15 Pedro Alves <palves@redhat.com>
* common/common-defs.h: Update comment.
* common/gdb_unique_ptr.h: Update header comment and copyright
year.
(gdb::unique_ptr, gdb::move): Delete.
2016-11-15 Pedro Alves <palves@redhat.com>
* ada-lang.c (create_excep_cond_exprs): Use std::move instead of
gdb::move.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use
std::unique_ptr instead of gdb::unique_ptr.
* breakpoint.c (watch_command_1): Use std::move instead of
gdb::move.
* cli/cli-dump.c (dump_memory_to_file, restore_binary_file): Use
std::unique_ptr instead of gdb::unique_ptr.
* dtrace-probe.c (dtrace_process_dof_probe): Use std::move instead
of gdb::move.
* elfread.c (elf_read_minimal_symbols): Use std::unique_ptr
instead of gdb::unique_ptr.
* mi/mi-main.c (mi_cmd_data_read_memory): Use std::unique_ptr
instead of gdb::unique_ptr.
* parse.c (parse_expression_for_completion): Use std::move instead
of gdb::move.
* printcmd.c (display_command): std::move instead of gdb::move.
2016-11-14 Markus Metzger <markus.t.metzger@intel.com>
* nat/linux-btrace.c (perf_event_read): Allow data_head < size.
* nat/linux-btrace.c (perf_event_read_all): Do not adjust size.
2016-11-12 Tom Tromey <tom@tromey.com>
* rust-exp.y (super_name): Use std::vector.
(lex_number): Use std::string.
(convert_params_to_types): Return std::vector.
(convert_ast_to_type, convert_name): Update.
* rust-lang.c (rust_get_disr_info): Use unique_xmalloc_ptr.
2016-11-12 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_get_disr_info): Use std::string in one more
spot.
2016-11-11 Yao Qi <yao.qi@linaro.org>
* spu-tdep.c (spu_software_single_step): Don't call
get_frame_register_bytes, call get_frame_register_unsigned
instead.
2016-11-11 Yao Qi <yao.qi@linaro.org>
* cp-valprint.c (cp_print_value): Remove local base_valaddr.
* extension-priv.h (struct extension_language_ops)
<apply_val_pretty_printer>: Remove the second parameter.
Remove const from "struct value *". Callers updated.
* extension.c (apply_ext_lang_val_pretty_printer): Update
comments. Remove parameter valaddr. Remove const from
"struct value *".
* extension.h (apply_ext_lang_val_pretty_printer): Update
declaration.
* guile/guile-internal.h (gdbscm_apply_val_pretty_printer):
Update declaration.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
Remove parameter valaddr. Remove const from "struct value *".
* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
Likewise.
* python/python-internal.h (gdbpy_apply_val_pretty_printer):
Update declaration.
2016-11-11 Yao Qi <yao.qi@linaro.org>
* c-lang.h (cp_print_value_fields): Update declaration.
* cp-valprint.c (cp_print_value): Update declaration.
(cp_print_value_fields): Remove parameter valaddr. Callers
updated.
(cp_print_value): Likewise.
2016-11-09 Tom Tromey <tom@tromey.com>
* varobj.h (varobj_get_display_hint): Change return type.
* varobj.c (varobj_get_display_hint): Return unique_xmalloc_ptr.
(varobj_value_get_print_value): Update.
* python/python.c (gdbpy_before_prompt_hook, gdbpy_print_stack)
(gdbpy_apply_type_printers): Update.
* python/python-internal.h (unicode_to_target_string)
(python_string_to_target_string, python_string_to_host_string)
(gdbpy_obj_to_string, gdbpy_exception_to_string)
(gdbpy_get_display_hint): Change return types.
* python/py-varobj.c (py_varobj_iter_next): Update.
* python/py-value.c (valpy_getitem, convert_value_from_python):
Update.
* python/py-utils.c (unicode_to_encoded_string)
(unicode_to_target_string, python_string_to_target_string)
(python_string_to_host_string, gdbpy_obj_to_string)
(gdbpy_exception_to_string): Return unique_xmalloc_ptr.
* python/py-unwind.c (pyuw_parse_register_id): Update.
* python/py-type.c (typy_getitem): Update.
* python/py-prettyprint.c (gdbpy_get_display_hint)
(print_stack_unless_memory_error, print_children)
(gdbpy_apply_val_pretty_printer): Update.
* python/py-param.c (set_parameter_value): Update.
(get_doc_string, call_doc_function): Return unique_xmalloc_ptr.
(get_set_value, get_show_value, compute_enum_values, parmpy_init):
Update.
* python/py-infthread.c (thpy_set_name): Update.
* python/py-function.c (fnpy_call, fnpy_init): Update.
* python/py-framefilter.c (extract_sym): Change "name" to
unique_xmalloc_ptr.
(enumerate_args, enumerate_locals): Update.
(py_print_frame): Use unique_xmalloc_ptr.
* python/py-frame.c (frapy_read_var): Update. Remove cleanup.
* python/py-cmd.c (cmdpy_function, cmdpy_completer, cmdpy_init):
Update.
* python/py-breakpoint.c (bppy_set_condition): Use
unique_xmalloc_ptr.
(bppy_init): Likewise. Remove cleanup.
(local_setattro): Update.
* mi/mi-cmd-var.c (print_varobj, mi_cmd_var_list_children)
(varobj_update_one): Update.
2016-11-09 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_eval_command_one): Use std::move instead of
gdb::move.
* ax.h (agent_expr_up): Use std::unique_ptr instead of
gdb::unique_ptr.
* breakpoint.c (parse_cond_to_aexpr): Use std::move instead of
gdb::move.
* tracepoint.c (collection_list::collect_symbol): Likewise.
(collection_list::~collection_list): Delete.
(encode_actions_1): Use std::move instead of gdb::move.
(collection_list::add_aexpr): Use std::move instead of
unique_ptr::release.
* tracepoint.h (collection_list) <~collection_list>: Delete
declaration.
<m_aexprs>: Now a vector of agent_ptr_up.
2016-11-09 Pedro Alves <palves@redhat.com>
* main.c (struct cmdarg): Add constructor.
(captured_main_1): Use vector::emplace_back.
* tracepoint.c (collection_list::add_memrange): Likewise.
2016-11-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
* tui/tui-winsource.c (tui_alloc_source_buffer): Remove
failed-xmalloc handling.
2016-11-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
* tui/tui-winsource.c (tui_alloc_source_buffer): Subtract
highlight box's overhead when calculating the content height.
2016-11-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
* tui/tui-disasm.c (tui_set_disassem_content): Fix calculation of
the longest disassembly line's length.
2016-11-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
* tui/tui-disasm.c (tui_set_disassem_content): Fix line buffer
overrun due to unchecked strcpy.
2016-11-09 Tristan Gingold <gingold@adacore.com>
* darwin-nat.c (find_inferior_task_it): Fix indentation.
(find_inferior_notify_it): Remove.
(find_inferior_pid_it): New function.
(darwin_find_inferior_by_notify): Remove.
(darwin_find_inferior_by_pid): New function.
(darwin_find_new_inferior): New function.
(darwin_check_message_ndr): New function from
darwin_decode_exception_message.
(darwin_decode_exception_message): Call darwin_check_message_ndr.
Handle SIGTRAP addressed to an unknown task (when a task spawned).
(darwin_decode_notify_message): New function.
(darwin_decode_message): Handle unknown task.
(darwin_deallocate_threads): New function from darwin_mourn_inferior.
(darwin_mourn_inferior): Use darwin_deallocate_threads and
darwin_deallocate_exception_ports.
(darwin_deallocate_exception_ports): New function from
darwin_mourn_inferior.
(darwin_setup_exceptions): New function from darwin_attach_pid.
(darwin_setup_request_notification): Likewise.
(darwin_attach_pid): Call darwin_setup_request_notification and
darwin_setup_request_notification.
2016-11-08 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_frame): Use
get_addr_from_python. Check for errors when getting line number.
2016-11-08 Yao Qi <yao.qi@linaro.org>
* ada-lang.h (ada_val_print): Remove second parameter. Remove
const from "struct value *".
* ada-valprint.c (print_field_values): Remove const from
"struct value *".
(val_print_packed_array_elements): Likewise.
(print_variant_part): Likewise.
(ada_val_print_string): Likewise.
(ada_val_print_gnat_array): Likewise.
(ada_val_print_ptr): Likewise.
(ada_val_print_num): Likewise.
(ada_val_print_enum): Likewise.
(ada_val_print_flt): Likewise.
(ada_val_print_union): Likewise.
(ada_val_print_struct_union): Likewise.
(ada_val_print_ref): Likewise.
(ada_val_print_1): Remove second parameter. Remove const from
"struct value *".
(ada_val_print): Likewise.
* c-lang.h (c_val_print): Likewise.
* c-valprint.c (c_val_print_array): Remove const from
"struct value *".
(c_val_print_ptr): Likewise.
(c_val_print_struct): Likewise.
(c_val_print_union): Likewise.
(c_val_print_int): Likewise.
(c_val_print_memberptr): Likewise.
(c_val_print): Remove second parameter. Remove const from
"struct value *". All callers updated.
* cp-valprint.c (cp_print_value): Remove const from
"struct value *".
(cp_print_value_fields): Likewise.
(c_val_print_value): Likewise.
* d-lang.h (d_val_print): Remove second parameter. Remove const
from "struct value *".
* d-valprint.c (dynamic_array_type): Likewise.
(d_val_print): Likewise.
* f-lang.h (f_val_print): Likewise.
* f-valprint.c (f_val_print): Likewise.
* go-lang.h (go_val_print): Likewise.
* go-valprint.c (print_go_string): Likewise.
(go_val_print): Likewise.
* language.c (unk_lang_val_print): Likewise.
* language.h (struct language_defn) <la_val_print>: Likewise.
Update comments.
(LA_VAL_PRINT): Remove.
* m2-lang.h (m2_val_print): Remove const from
"struct value *".
* m2-valprint.c (m2_print_array_contents): Likewise.
(m2_val_print): Likewise.
* p-lang.h (pascal_val_print): Remove second parameter. Remove
const from "struct value *".
(pascal_object_print_value_fields): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
(pascal_object_print_value_fields): Likewise.
(pascal_object_print_value): Likewise.
* rust-lang.c (rust_get_disr_info): Likewise.
(val_print_struct): Likewise.
(rust_val_print): Likewise.
* valprint.c (generic_val_print_array): Likewise.
(generic_val_print_ptr): Likewise.
(generic_val_print_memberptr): Likewise.
(generic_val_print_ref): Likewise.
(generic_val_print_enum): Likewise.
(generic_val_print_flags): Likewise.
(generic_val_print_func): Likewise.
(generic_val_print_bool): Likewise.
(generic_val_print_int): Likewise.
(generic_val_print_char): Likewise.
(generic_val_print_float): Likewise.
(generic_val_print_decfloat): Likewise.
(generic_val_print_complex): Likewise.
(generic_val_print): Likewise.
(val_print): Likewise.
(common_val_print): Likewise.
(val_print_type_code_flags): Likewise.
(val_print_scalar_formatted): Likewise.
(val_print_array_elements): Likewise.
* valprint.h (val_print_array_elements): Update declaration.
(val_print_scalar_formatted): Likewise.
(generic_val_print): Likewise.
* value.h (val_print): Likewise.
2016-11-08 Yao Qi <yao.qi@linaro.org>
* mt-tdep.c (mt_registers_info): Call
get_frame_register_value instead of
deprecated_frame_register_read.
* sh64-tdep.c (sh64_do_register): Likewise.
2016-11-08 Pedro Alves <palves@redhat.com>
* ax.h (agent_expr_p): Delete.
(DEF_VEC_P (agent_expr_p)): Delete.
* breakpoint.c (build_target_condition_list)
(build_target_command_list): Adjust to use of std::vector.
(bp_location_dtor): Remove now unnecessary VEC_free calls.
* breakpoint.h: Include <vector>.
(struct bp_target_info) <conditions, tcommands>: Now
std::vector's.
* remote.c (remote_add_target_side_condition): bp_tgt->conditions
is now a std::vector; adjust.
(remote_add_target_side_commands, remote_insert_breakpoint):
bp_tgt->tcommands is now a std::vector; adjust.
2016-11-08 Pedro Alves <palves@redhat.com>
* ax-gdb.c (is_nontrivial_conversion): Use agent_expr_up.
(gen_trace_for_var, gen_trace_for_expr, gen_eval_for_expr)
(gen_trace_for_return_address, gen_printf): Use and return an
agent_expr_up. Don't use make_cleanup_free_agent_expr.
(agent_eval_command_one, maint_agent_printf_command): Use
agent_expr_up. Don't use make_cleanup_free_agent_expr.
* ax-gdb.h (gen_trace_for_expr, gen_trace_for_var)
(gen_trace_for_return_address, gen_eval_for_expr, gen_printf): Use
agent_expr_up.
* ax-general.c (new_agent_expr): Rename to ...
(agent_expr::agent_expr): ... this, and now a constructor.
(free_agent_expr): Rename to ...
(agent_expr::~agent_exp): ... this, and now a destructor.
(do_free_agent_expr_cleanup, make_cleanup_free_agent_expr):
Delete.
* ax.h (struct agent_expr): Add ctor/dtor.
(agent_expr_up): New typedef.
(new_agent_expr, free_agent_expr, make_cleanup_free_agent_expr):
Delete declarations.
* breakpoint.c (parse_cond_to_aexpr): Use and return an
agent_expr_up. Don't use make_cleanup_free_agent_expr.
(build_target_condition_list): Adjust to use agent_expr_up.
(parse_cmd_to_aexpr): Use and return an agent_expr_up. Don't use
make_cleanup_free_agent_expr.
(build_target_command_list): Adjust to use agent_expr_up.
(force_breakpoint_reinsertion): Adjust to use agent_expr_up.
(bp_location_dtor): Remove unnecessary free_agent_expr and xfree
calls.
* breakpoint.h (struct bp_target_info) <cond_bytecode,
cmd_bytecode>: Now agent_expr_up's.
* remote.c (remote_download_tracepoint): Adjust to use
agent_expr_up and remove use of make_cleanup_free_agent_expr.
* tracepoint.c (validate_actionline, collect_symbol): Adjust to
use agent_expr_up and remove uses of make_cleanup_free_agent_expr.
(collection_list::~collection_list): Call delete instead of
free_agent_expr.
(encode_actions_1): Adjust to use agent_expr_up and remove uses of
make_cleanup_free_agent_expr.
(add_aexpr): Change parameter type to agent_expr_up; Return a raw
agent_expr pointer.
2016-11-08 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_name_for_lookup, type_as_string): Use and return
std::string.
(type_as_string_and_cleanup): Delete.
(ada_lookup_struct_elt_type): Use type_as_string.
* ada-lang.h (ada_name_for_lookup): Now returns std::string.
* ada-varobj.c (ada_varobj_scalar_image): Return a std::string.
(ada_varobj_describe_child): Make 'child_name' and
'child_path_expr' parameters std::string pointers.
(ada_varobj_describe_struct_child, ada_varobj_describe_ptr_child):
Likewise, and use string_printf.
(ada_varobj_describe_simple_array_child)
(ada_varobj_describe_child): Likewise.
(ada_varobj_get_name_of_child, ada_varobj_get_path_expr_of_child)
(ada_varobj_get_value_image)
(ada_varobj_get_value_of_array_variable)
(ada_varobj_get_value_of_variable, ada_name_of_variable)
(ada_name_of_child, ada_path_expr_of_child)
(ada_value_of_variable): Now returns std::string. Use
string_printf.
(ada_value_of_child): Adjust.
* break-catch-throw.c (check_status_exception_catchpoint): Adjust
to use std::string.
* breakpoint.c (watch_command_1): Adjust to use std::string.
* c-lang.c (c_get_string): Adjust to use std::string.
* c-typeprint.c (print_name_maybe_canonical): Use std::string.
* c-varobj.c (varobj_is_anonymous_child): Use ==/!= std::string
operators.
(c_name_of_variable): Now returns a std::string.
(c_describe_child): The 'cname' and 'cfull_expression' output
parameters are now std::string pointers. Adjust.
(c_name_of_child, c_path_expr_of_child, c_value_of_variable)
(cplus_number_of_children): Adjust to use std::string and
string_printf.
(cplus_name_of_variable): Now returns a std::string.
(cplus_describe_child): The 'cname' and 'cfull_expression' output
parameters are now std::string pointers. Adjust.
(cplus_name_of_child, cplus_path_expr_of_child)
(cplus_value_of_variable): Now returns a std::string.
* cp-abi.c (cplus_typename_from_type_info): Return std::string.
* cp-abi.h (cplus_typename_from_type_info): Return std::string.
(struct cp_abi_ops) <get_typename_from_type_info>: Return
std::string.
* cp-support.c (inspect_type): Use std::string.
(cp_canonicalize_string_full, cp_canonicalize_string_no_typedefs)
(cp_canonicalize_string): Return std::string and adjust.
* cp-support.h (cp_canonicalize_string)
(cp_canonicalize_string_no_typedefs, cp_canonicalize_string_full):
Return std::string.
* dbxread.c (read_dbx_symtab): Use std::string.
* dwarf2read.c (dwarf2_canonicalize_name): Adjust to use std::string.
* gdbcmd.h (lookup_struct_elt_type): Adjust to use std::string.
* gnu-v3-abi.c (gnuv3_get_typeid): Use std::string.
(gnuv3_get_typename_from_type_info): Return a std::string and
adjust.
(gnuv3_get_type_from_type_info): Adjust to use std::string.
* guile/guile.c (gdbscm_execute_gdb_command): Adjust to use
std::string.
* infcmd.c (print_return_value_1): Adjust to use std::string.
* linespec.c (find_linespec_symbols): Adjust to
demangle_for_lookup API change. Use std::string.
* mi/mi-cmd-var.c (print_varobj, mi_cmd_var_set_format)
(mi_cmd_var_info_type, mi_cmd_var_info_path_expression)
(mi_cmd_var_info_expression, mi_cmd_var_evaluate_expression)
(mi_cmd_var_assign, varobj_update_one): Adjust to use std::string.
* minsyms.c (lookup_minimal_symbol): Use std::string.
* python/py-varobj.c (py_varobj_iter_next): Use new instead of
XNEW. vitem->name is a std::string now, adjust.
* rust-exp.y (convert_ast_to_type, convert_name): Adjust to use
std::string.
* stabsread.c (define_symbol): Adjust to use std::string.
* symtab.c (demangle_for_lookup): Now returns 'const char *'. Add
a demangle_result_storage parameter. Use it for storage.
(lookup_symbol_in_language)
(lookup_symbol_in_objfile_from_linkage_name): Adjust to new
demangle_for_lookup API.
* symtab.h (struct demangle_result_storage): New type.
(demangle_for_lookup): Now returns 'const char *'. Add a
demangle_result_storage parameter.
* typeprint.c (type_to_string): Return std::string and use
ui_file_as_string.
* value.h (type_to_string): Change return type to std::string.
* varobj-iter.h (struct varobj_item) <name>: Now a std::string.
(varobj_iter_delete): Use delete instead of xfree.
* varobj.c (create_child): Return std::string instead of char * in
output parameter.
(name_of_variable, name_of_child, my_value_of_variable): Return
std::string instead of char *.
(varobj_create, varobj_get_handle): Constify 'objname' parameter.
Adjust to std::string fields.
(varobj_get_objname): Return a const char * instead of a char *.
(varobj_get_expression): Return a std::string.
(varobj_list_children): Adjust to use std::string.
(varobj_get_type): Return a std::string.
(varobj_get_path_expr): Return a const char * instead of a char *.
Adjust to std::string fields.
(varobj_get_formatted_value, varobj_get_value): Return a
std::string.
(varobj_set_value): Change type of 'expression' parameter to
std::string. Use std::string.
(install_new_value): Use std::string.
(delete_variable_1): Adjust to use std::string.
(create_child): Change the 'name' parameter to a std::string
reference. Swap it into the new item's name.
(create_child_with_value): Swap item's name into the new child's
name. Use string_printf.
(new_variable): Use new instead of XNEW.
(free_variable): Don't xfree fields that are now std::string.
(name_of_variable, name_of_child): Now returns std::string.
(value_of_root): Adjust to use std::string.
(my_value_of_variable, varobj_value_get_print_value): Return
and use std::string.
(varobj_value_get_print_value): Adjust to use ui_file_as_string
and std::string.
* varobj.h (struct varobj) <name, path_expr, obj_name,
print_value>: Now std::string's.
<name_of_variable, name_of_child, path_expr_of_child,
value_of_variable>: Return std::string.
(varobj_create, varobj_get_handle): Constify 'objname' parameter.
(varobj_get_objname): Return a const char * instead of a char *.
(varobj_get_expression, varobj_get_type): Return a std::string.
(varobj_get_path_expr): Return a const char * instead of a char *.
(varobj_get_formatted_value, varobj_get_value): Return a
std::string.
(varobj_set_value): Constify 'expression' parameter.
(varobj_value_get_print_value): Return a std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* language.c (add_language): Use ui_file_as_string and adjust to
use std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* rust-lang.c (struct disr_info) <name>: Now a std::string.
(rust_get_disr_info): Use ui_file_as_string and adjust to use
std::string.
(rust_val_print): Adjust to use std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* infrun.c (print_target_wait_results): Use ui_file_as_string and
std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use ui_file_as_string and return
std::string.
(type_as_string_and_cleanup): Delete.
(ada_lookup_struct_elt_type): Use type_as_string.
2016-11-08 Pedro Alves <palves@redhat.com>
* gdbarch.sh (verify_gdbarch): Use ui_file_as_string and
std::string.
* gdbarch.c: Regenerate.
2016-11-08 Pedro Alves <palves@redhat.com>
* c-exp.y (OPERATOR NEW): Adjust to use ui_file_as_string and
std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* c-lang.h (c_compute_program): Now returns std::string.
* compile/compile-internal.h (class compile_file_names): New
class.
* compile/compile-object-load.c (compile_object_load): Replace
object_file and source_file parameters with a compile_file_names
parameter. Adjust.
* compile-object-load.h: Include "compile-internal.h".
(compile_object_load): Replace object_file and source_file
parameters with a compile_file_names parameter.
* compile/compile-c-support.c (c_compute_program): Now returns a
std::string. Use ui_file_as_string.
* compile/compile.c (get_new_file_names): Remove parameters and
return a compile_file_names instead.
(compile_to_object): Now returns a compile_file_names. Use
ui_file_as_string.
(eval_compile_command): Use compile_file_names.
* language.h (struct language_defn) <la_compute_program>: Now
returns std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* cli/cli-setshow.c (do_show_command): Adjust to use
ui_file_as_string and std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* remote.c (escape_buffer): Use ui_file_as_string and return
std::string.
(putpkt_binary, read_frame): Adjust to use std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* python/py-arch.c (archpy_disassemble): Use ui_file_as_string and
std::string.
* python/py-breakpoint.c (bppy_get_commands): Use
ui_file_as_string and std::string.
* python/py-frame.c (frapy_str): Likewise.
* python/py-type.c (typy_str): Likewise.
* python/py-unwind.c (unwind_infopy_str): Likewise.
* python/py-value.c (valpy_str): Likewise.
2016-11-08 Pedro Alves <palves@redhat.com>
* printcmd.c (eval_command): Use ui_file_as_string and
std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* top.c (quit_confirm): Use ui_file_as_string and std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* gdbcmd.h (execute_command_to_string): Now returns std::string.
(lookup_struct_elt_type): Adjust to use std::string.
* top.c (execute_command_to_string): Use ui_file_as_string and
return std::string.
* guile/guile.c (gdbscm_execute_gdb_command): Adjust to use
std::string.
* python/python.c (execute_gdb_command): Adjust to use
std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
ui_file_as_string and adjust to use std::string.
* guile/scm-disasm.c (gdbscm_arch_disassemble): Likewise.
* guile/scm-frame.c (frscm_print_frame_smob): Likewise.
* guile/scm-type.c (tyscm_type_name): Use ui_file_as_string and
adjust to use std::string. Throw exception directly instead of
returning it in EXCP output parameter.
(tyscm_print_type_smob, gdbscm_type_print_name): Adjust to
tyscm_type_name interface change.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use ui_file_as_string and std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* arm-tdep.c (_initialize_arm_tdep): Use ui_file_as_string and
std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* utils.c (error_stream): Use ui_file_as_string and std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* ui-out.c (ui_out_field_stream): Use ui_file_as_string.
2016-11-08 Pedro Alves <palves@redhat.com>
* ada-valprint.c (ada_print_floating): Use ui_file_as_string and
std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* xtensa-tdep.c (xtensa_verify_config): Use ui_file_as_string and
std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* dwarf2read.c (dwarf2_compute_name): Use ui_file_as_string and
std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* mi/mi-main.c (print_variable_or_computed): Constify 'expression'
parameter.
(mi_cmd_trace_frame_collected): Call encode_actions instead of
encode_actions_and_make_cleanup. Adjust to use std::vector.
* tracepoint.c (memrange_cmp): Delete.
(memrange_comp): New.
(memrange_sortmerge): Take a memrange vector as parameter instead
of a collection_list. Use std::sort instead of qsort.
(add_register): Now a method of collection_list. Adjust to m_
prefix of data fields.
(add_memrange): Now a method of collection_list. Adjust to m_
prefix of data fields. Adjust to use std::vector.
(collect_symbol): Now a method of collection_list. Adjust to m_
prefix of data fields.
(do_collect_symbol): Adjust. Call add_wholly_collected instead of
accessing the vector directly.
(collection_list::add_wholly_collected): New.
(add_local_symbols): Now a method of collection_list.
(add_static_trace_data): Now a method of collection_list. Adjust
to use bool.
(clear_collection_list, do_clear_collection_list): Delete.
(init_collection_list): Delete.
(collection_list::collection_list): New.
(collection_list::~collection_list): New.
(stringify_collection_list): Rename to ...
(collection_list::stringify): ... this and adjust to being a
method of collection_list. Adjust to use of std::vector.
(append_exp): Now a method of collection_list. Use
ui_file_as_string. Adjust to std::vector.
(collection_list::finish): New.
(encode_actions_1): Adjust.
(encode_actions_and_make_cleanup): Rename to ...
(encode_actions)... this. No longer returns a cleanup. No longer
call init_collection_list nor install do_clear_collection_list
cleanups. Call collection_list::finish instead of
memrange_sortmerge directly.
(encode_actions_rsp): Adjust to call encode_actions instead of
encode_actions_and_make_cleanup. Adjust to method renames.
(add_aexpr): Now a method of collection_list.
* tracepoint.h: Include <vector> and <string>.
(struct memrange): Add constructors.
(struct collection_list): Now a class.
(class collection_list) <collection_list, ~collection_list,
add_wholly_collected, append_exp, add_aexpr, add_register,
add_memrange, collect_symbol, add_local_symbols,
add_static_trace_data, finish, stringify, wholly_collected, and
computed>: New methods.
<regs_mask>: Rename to ...
<m_regs_mask>: ... this.
<listsize, next_memrange, list>: Delete fields.
<m_memranges>: New field.
<aexpr_listsize, next_aexpr_elt, aexpr_list>: Delete fields.
<m_aexprs>: New field.
<strace_data>: Rename to ...
<m_strace_data>: ... this. Now a bool.
<wholly_collected>: Rename to ...
<m_wholly_collected>: ... this. Now a std::vector<std::string>.
<computed>: Rename to ...
<m_computed>: ... this. Now a std::vector<std::string>.
(encode_actions_and_make_cleanup): Delete declaration.
(encode_actions): New declaration.
2016-11-08 Pedro Alves <palves@redhat.com>
* ui-file.c (do_ui_file_as_string, ui_file_as_string): New
functions.
* ui-file.h: Include <string>.
(ui_file_as_string): New declaration.
2016-11-08 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_read_renaming_var_value): Use expression_up.
(struct ada_catchpoint_location) <excep_cond_expr>: Now an
expression_up.
(ada_catchpoint_location_dtor): Reset excep_cond_expr instead of
using xfree.
(create_excep_cond_exprs): Use expression_up and gdb::move.
(allocate_location_exception): Use new instead of XNEW.
(should_stop_exception): Likewise. Adjust to use expression_up.
(create_ada_exception_catchpoint): Use new instead of XNEW.
* ax-gdb.c (agent_eval_command_one): Use expression_up instead of
cleanups.
(maint_agent_printf_command): Use expression_up.
* break-catch-sig.c (create_signal_catchpoint): Use new instead of
XNEW.
* break-catch-syscall.c (create_syscall_event_catchpoint):
Likewise.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead
of XCNEW. Use gdb::unique_ptr instead of cleanups.
* breakpoint.c (set_breakpoint_condition, update_watchpoint)
(parse_cmd_to_aexpr, watchpoint_check)
(bpstat_check_breakpoint_conditions, watchpoint_locations_match):
Adjust to use expression_up.
(init_bp_location): Adjust.
(free_bp_location): Use delete instead of xfree.
(set_raw_breakpoint_without_location, set_raw_breakpoint)
(add_solib_catchpoint, create_fork_vfork_event_catchpoint)
(new_single_step_breakpoint, create_breakpoint_sal): Use new
instead of XNEW.
(find_condition_and_thread): Adjust to use expression_up.
(create_breakpoint): Use new instead of XNEW.
(dtor_watchpoint): Don't xfree expression pointers, they're
unique_ptr's now.
(insert_watchpoint, remove_watchpoint): Adjust.
(watch_command_1): Use expression_up. Use new instead of XCNEW.
(catch_exec_command_1): Use new instead of XNEW.
(bp_location_dtor): Don't xfree expression pointers, they're
unique_ptr's now.
(base_breakpoint_allocate_location)
(strace_marker_create_breakpoints_sal): Use new instead of XNEW.
(delete_breakpoint): Use delete instead of xfree.
* breakpoint.h (struct bp_location) <cond>: Now an
unique_ptr<expression> instead of a raw pointer.
(struct watchpoint) <exp, cond_exp>: Likewise.
* cli/cli-script.c (execute_control_command): Use expression_up
instead of cleanups.
* dtrace-probe.c (dtrace_process_dof_probe): Use expression_up.
* eval.c (parse_and_eval_address, parse_and_eval_long)
(parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type):
Use expression_up instead of cleanups.
* expression.h (expression_up): New typedef.
(parse_expression, parse_expression_with_language, parse_exp_1):
Change return type to expression_up.
* mi/mi-main.c (mi_cmd_data_evaluate_expression)
(print_variable_or_computed): Use expression_up.
* objc-lang.c (print_object_command): Use expression_up instead of
cleanups.
* parse.c (parse_exp_1, parse_exp_in_context)
(parse_exp_in_context_1, parse_expression)
(parse_expression_with_language): Return an expression_up instead
of a raw pointer.
(parse_expression_for_completion): Use expression_up.
* printcmd.c (struct display) <exp>: Now an expression_up instead
of a raw pointer.
(print_command_1, output_command_const, set_command, x_command):
Use expression_up instead of cleanups.
(display_command): Likewise. Use new instead of XNEW.
(free_display): Use delete instead of xfree.
(do_one_display): Adjust to use expression_up.
* remote.c (remote_download_tracepoint): Likewise.
* stack.c (return_command): Likewise.
* tracepoint.c (validate_actionline, encode_actions_1): Use
expression_up instead of cleanups.
* typeprint.c (whatis_exp, maintenance_print_type): Likewise.
* value.c (init_if_undefined_command): Likewise.
* varobj.c (struct varobj_root) <exp>: Now an expression_up
instead of a raw pointer.
(varobj_create): Adjust.
(varobj_set_value): Use an expression_up instead of cleanups.
(new_root_variable): Use new instead of XNEW.
(free_variable): Use delete instead of xfree.
(value_of_root_1): Use std::swap.
2016-11-08 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (execute_control_command): Use std::string
instead of cleanups.
(locate_arg): Constify return type.
(insert_args): Constify paremeter. Simplify using std::string.
Return a std::string.
2016-11-08 Pedro Alves <palves@redhat.com>
* breakpoint.c (struct commands_info) <arg>: Constify.
(commands_command_1): Constify 'arg' parameter. Use std::string
and string_printf.
(commands_from_control_command): Constify 'arg' parameter.
(map_breakpoint_numbers): Constify 'args' parameter.
* breakpoint.h (commands_from_control_command): Constify 'arg'
parameter.
2016-11-08 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (execute_control_command): Assume insert_args
never returns NULL.
(insert_args): Assume xmalloc never returns NULL.
2016-11-08 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_OBS): Add utils-selftests.o.
* common/common-utils.c (string_printf): New function.
* common/common-utils.h: Include <string>.
(string_printf): Declare.
* utils-selftests.c: New file.
2016-11-08 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Return
VEC (CORE_ADDR) *. Return NULL instead of 0. Don't call
insert_single_step_breakpoint.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
(alpha_software_single_step): Likewise.
* alpha-tdep.h (alpha_software_single_step): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Return
VEC (CORE_ADDR) *. Return NULL instead of 0.
* arm-tdep.c (arm_software_single_step): Return NULL instead of 0.
* arm-tdep.h (arm_software_single_step): Update declaration.
* breakpoint.c (insert_single_step_breakpoints): New function.
* breakpoint.h (insert_single_step_breakpoints): Declare.
* cris-tdep.c (cris_software_single_step): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
* gdbarch.sh (software_single_step): Change it to return
VEC (CORE_ADDR) *.
* gdbarch.c, gdbarch.h: Regenerated.
* infrun.c (maybe_software_singlestep): Adjust.
* mips-tdep.c (mips_deal_with_atomic_sequence): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
(micromips_deal_with_atomic_sequence): Likewise.
(deal_with_atomic_sequence): Likewise.
(mips_software_single_step): Likewise.
* mips-tdep.h (mips_software_single_step): Update declaration.
* moxie-tdep.c (moxie_software_single_step): Likewise.
* nios2-tdep.c (nios2_software_single_step): Likewise.
* ppc-tdep.h (ppc_deal_with_atomic_sequence): Update
declaration.
* record-full.c (record_full_resume): Adjust.
(record_full_wait_1): Likewise.
* rs6000-aix-tdep.c (rs6000_software_single_step): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
* s390-linux-tdep.c (s390_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* spu-tdep.c (spu_software_single_step): Likewise.
* tic6x-tdep.c (tic6x_software_single_step): Likewise.
2016-11-08 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_software_single_step): Write
adjusted address back to vector. Call insert_single_step_breakpoint
in a new loop.
* arm-tdep.c (arm_software_single_step): Likewise.
2016-11-08 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_software_single_step): Don't
call arm_insert_single_step_breakpoint, call
insert_single_step_breakpoint instead.
* arm-tdep.c (arm_insert_single_step_breakpoint): Remove.
(arm_software_single_step): Don't call
arm_insert_single_step_breakpoint, call
insert_single_step_breakpoint instead.
* arm-tdep.h (arm_insert_single_step_breakpoint): Remove
declaration.
2016-11-08 Cordian A. Daniluk <th3c0r1uk@gmail.com>
PR breakpoints/20739
* breakpoint.c (check_fast_tracepoint_sals): Don't print duplicate
0x prefix.
2016-11-08 Yao Qi <yao.qi@linaro.org>
* rust-lang.c (val_print_struct): Fix indentation.
2016-11-08 Lionel Flandrin <lionel@svkt.org>
* remote.c (process_g_packet): Detect truncated registers in 'g'
packets and raise an error.
2016-11-07 Doug Evans <dje@google.com>
* guile/scm-value.c (gdbscm_value_field): Fix call to value_struct_elt.
* python/py-value.c (valpy_getitem): Ditto.
2016-11-07 Doug Evans <dje@google.com>
* i386-tdep.c (i386_gdbarch_init): Add comments.
2016-11-07 Doug Evans <dje@google.com>
* python/py-unwind.c (unwind_infopy_str): Fix use of VEC_iterate.
2016-11-07 Doug Evans <dje@google.com>
* configure.tgt (x86_64-*-elf*): Remove i386bsd-tdep.o.
2016-11-04 Simon Marchi <simon.marchi@polymtl.ca>
* maint.c (scoped_command_stats::scoped_command_stats): Fix typo.
* ppcnbsd-tdep.c (_initialize_ppcnbsd_tdep): Likewise.
* ppcobsd-tdep.c (_initialize_ppcobsd_tdep): Likewise.
* ui-out.c (ui_out_new): Likewise.
* utils.c (init_page_info): Likewise.
(reset_prompt_for_continue_wait_time): Likewise.
* windows-nat.c (windows_init_thread_list): Likewise.
* xtensa-tdep.c (call0_analyze_prologue): Likewise.
2016-10-29 Manish Goregaokar <manish@mozilla.com>
* rust-exp.y: Parse `sizeof(exp)` as `UNOP_SIZEOF`.
2016-10-28 Manish Goregaokar <manish@mozilla.com>
* rust-lang.c (rust_union_is_untagged): Add function to check if a
union is an untagged union.
(rust_val_print): Handle printing of untagged union values.
(rust_print_type): Handle printing of untagged union types.
(rust_evaluate_subexp): Handle evaluating field access on untagged
unions.
2016-10-27 Manish Goregaokar <manish@mozilla.com>
* rust-lang.c (rust_get_disr_info): Treat univariant enums without
discriminants as encoded enums with a real field.
* rust-lang.c (rust_evaluate_subexp): Handle field access on
encoded struct-like enums.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* Makefile.in (.y.c): Replace YY_NULL with YY_NULLPTR.
2016-11-03 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change it to
constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(aarch64_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* alpha-tdep.c (break_insn): Rename to alpha_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(alpha_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arc-tdep.c (arc_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation): New.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation_endian): New.
(BP_MANIPULATION): New.
(BP_MANIPULATION_ENDIAN): New.
* arm-tdep.c (arm_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* avr-tdep.c (avr_break_insn): Change it constexpr.
(avr_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cris-tdep.c (cris_gdbarch_init): Likewise.
* frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(frv_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(ft32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(h8300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(hppa_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* i386-tdep.c (break_insn): Rename it to i386_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(i386_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* iq2000-tdep.c (iq2000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(lm32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m32c_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m88k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(mep_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* microblaze-tdep.c (break_insn): Rename it to
microblaze_break_insn and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(microblaze_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(mn10300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(moxie_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(msp430_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* nds32-tdep.c (break_insn): Rename it to nds32_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(nds32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
and change its type to rl78_break_insn. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rl78_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rs6000-tdep.c (big_breakpoint): Change its type to
constexpr.
(little_breakpoint): Likewise.
Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
(rs6000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rx-tdep.c (breakpoint): Rename it to rx_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION
(s390_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* score-tdep.c (score_gdbarch_init): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sparc-tdep.c (break_insn): Rename it to sparc_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(sparc32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(spu_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(tilegx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* vax-tdep.c (break_insn): Rename it to vax_break_insn and
change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(vax_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xstormy16-tdep.c (breakpoint): Rename it to
xstormy16_break_insn and change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(xstormy16_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_override_mode): Remove.
(arm_pc_is_thumb): Update.
(arm_insert_single_step_breakpoint): Update.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.c (default_breakpoint_kind_from_current_state):
New function.
* arch-utils.h (default_breakpoint_kind_from_current_state):
Declare.
* arm-tdep.c (arm_breakpoint_kind_from_current_state): New
function.
(arm_gdbarch_init): Call
set_gdbarch_breakpoint_kind_from_current_state.
* breakpoint.c (breakpoint_kind): Call
gdbarch_breakpoint_kind_from_current_state for single step
breakpoint. Update comments.
* gdbarch.sh (breakpoint_kind_from_current_state): New.
* gdbarch.c, gdbarch.h: Regenerate.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.c (default_breakpoint_from_pc): New function.
* arch-utils.h (GDBARCH_BREAKPOINT_FROM_PC): Remove.
(GDBARCH_BREAKPOINT_MANIPULATION): Don't use
GDBARCH_BREAKPOINT_FROM_PC.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Don't call
set_gdbarch_breakpoint_from_pc.
(default_breakpoint_from_pc): Remove declaration.
* gdbarch.sh (breakpoint_from_pc): Add its default implementation.
* gdbarch.c, gdbarch.h: Regenerate.
* arm-tdep.c: Don't use GDBARCH_BREAKPOINT_FROM_PC.
* arc-tdep.c, bfin-tdep.c, cris-tdep.c, iq2000-tdep.c: Likewise.
* m32r-tdep.c, mips-tdep.c, mt-tdep.c: Likewise.
* nios2-tdep.c, score-tdep.c, sh-tdep.c: Likewise.
* sh64-tdep.c, tic6x-tdep.c, v850-tdep.c, xtensa-tdep.c: Likewise.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.c (default_remote_breakpoint_from_pc): Remove.
* arch-utils.h (default_remote_breakpoint_from_pc): Remove.
* arm-tdep.c (arm_remote_breakpoint_from_pc): Remove.
(arm_gdbarch_init): Don't call
set_gdbarch_remote_breakpoint_from_pc.
* gdbarch.sh (remote_breakpoint_from_pc): Remove.
* gdbarch.c, gdbarch.h: Regenerate.
* mips-tdep.c (mips_remote_breakpoint_from_pc): Remove.
(mips_gdbarch_init): Don't call
set_gdbarch_remote_breakpoint_from_pc.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* breakpoint.h (struct bp_target_info) <placed_size>: Remove.
<kind>: New field.
Update all users.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define
breakpoint_kind_from_pc and sw_breakpoint_from_kind.
(GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Call
set_gdbarch_breakpoint_kind_from_pc and
set_gdbarch_sw_breakpoint_from_kind.
* arm-tdep.c: Add comments.
* bfin-tdep.c: Likewise.
* breakpoint.c (breakpoint_kind): New function.
(insert_bp_location): Set target_info.placed_size and
target_info.placed_address.
(bkpt_insert_location): Likewise.
* cris-tdep.c: Add comments.
* gdbarch.sh (breakpoint_kind_from_pc): New.
(sw_breakpoint_from_kind): New.
* gdbarch.c, gdbarch.h: Regenerated.
* ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
(ia64_memory_remove_breakpoint): Don't assert
bp_tgt->placed_size.
(ia64_breakpoint_kind_from_pc): New function.
(ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
* mem-break.c (default_memory_insert_breakpoint): Don't set
bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind.
(default_memory_remove_breakpoint): Call
gdbarch_sw_breakpoint_from_kind.
(memory_validate_breakpoint): Don't check bp_tgt->placed_size.
* mips-tdep.c: Add comments.
* mt-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* record-full.c (record_full_insert_breakpoint): Don't call
gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address
and bp_tgt->placed_size.
* remote.c (remote_insert_breakpoint): Don't call
gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size.
Don't set bp_tgt->placed_address and bp_tgt->placed_size.
(remote_insert_hw_breakpoint): Likewise.
* score-tdep.c: Likewise.
* sh-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* v850-tdep.c: Likewise.
* xtensa-tdep.c: Likewise.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.h (GDBARCH_BREAKPOINT_FROM_PC): New macro.
(GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): New macro.
* arm-tdep.c (arm_breakpoint_from_pc): Remove.
(arm_breakpoint_kind_from_pc): New function.
(arm_sw_breakpoint_from_kind): New function.
(arm_breakpoint_from_pc): Call arm_breakpoint_kind_from_pc
and arm_sw_breakpoint_from_kind.
Use GDBARCH_BREAKPOINT_FROM_PC.
(arm_remote_breakpoint_from_pc): Call
arm_breakpoint_kind_from_pc.
(arm_gdbarch_init): Replace set_gdbarch_breakpoint_from_pc
with SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arc-tdep.c: Likewise.
* bfin-tdep.c: Likewise.
* cris-tdep.c: Likewise.
* iq2000-tdep.c: Likewise.
* m32r-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* rs6000-tdep.c: Likewise.
* score-tdep.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* v850-tdep.c: Likewise.
* xtensa-tdep.c: Likewise.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* mips-tdep.c (mips_breakpoint_kind): New enum.
(mips_breakpoint_from_pc): Use it.
(mips_remote_breakpoint_from_pc): Likewise.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): New macro.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): New macro.
aarch64-tdep.c (aarch64_breakpoint_from_pc): Remove. Use
GDBARCH_BREAKPOINT_MANIPULATION.
(aarch64_gdbarch_init): Replace set_gdbarch_breakpoint_from_pc
with SET_GDBARCH_BREAKPOINT_MANIPULATION.
* alpha-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* ft32-tdep.c: Likewise.
* h8300-tdep.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* lm32-tdep.c: Likewise.
* m32c-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* mep-tdep.c: Likewise.
* microblaze-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* msp430-tdep.c: Likewise.
* rl78-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* vax-tdep.c: Likewise.
* xstormy16-tdep.c: Likewise.
2016-11-03 Yao Qi <yao.qi@linaro.org>
* mem-break.c (default_memory_insert_breakpoint): Don't check
'bp' against NULL.
* microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint):
Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
2016-11-02 Tom Tromey <tom@tromey.com>
* dwarf2loc.c (dwarf_evaluate_loc_desc::get_base_type): Rename
from impl_get_base_type. Rewrite.
(struct dwarf_expr_baton): Remove.
(dwarf_evaluate_loc_desc::push_dwarf_reg_entry_value): Save and
restore more fields.
(symbol_needs_eval_context::get_frame_pc): New method.
* dwarf2expr.h (dwarf_expr_context::get_base_type): Now public,
virtual.
(dwarf_expr_context::impl_get_base_type): Remove.
* dwarf2expr.c (dwarf_expr_context::get_base_type): Remove.
2016-10-31 Maciej W. Rozycki <macro@imgtec.com>
* configure.ac <mips-sgi-irix5*>: Remove <sys/proc.h> _KMEMUSER
workaround.
* configure: Regenerate.
* config.in: Regenerate.
2016-10-31 Maciej W. Rozycki <macro@imgtec.com>
* mips-tdep.c (mips_r3041_reg_names): Remove.
(mips_breakpoint_from_pc): Remove IDT and PMON breakpoint
encodings.
2016-10-31 Maciej W. Rozycki <macro@imgtec.com>
* defs.h (gdb_osabi): Remove GDB_OSABI_IRIX enum value.
* osabi.c (gdb_osabi_names): Remove "Irix" entry.
* mips-tdep.c (mips_irix_reg_names): Remove.
(mips_register_type): Remove GDB_OSABI_IRIX code.
(mips_pseudo_register_type): Likewise.
(mips_breakpoint_from_pc): Likewise.
(mips_gdbarch_init): Likewise.
2016-10-29 Pedro Alves <palves@redhat.com>
* NEWS: Clarify C++ requirement.
2016-10-29 Pedro Alves <palves@redhat.com>
* NEWS: Adjust to mention C++11 requirement.
2016-10-29 Eli Zaretskii <eliz@gnu.org>
* NEWS: Mention support for redirection on MS-Windows.
* windows-nat.c (redir_open, redir_set_redirection)
(redirect_inferior_handles) [!__CYGWIN__]: New functions.
(windows_create_inferior) [!__CYGWIN__]: Use
'redirect_inferior_handles' to redirect standard handles of the
debuggee if the command line requests that.
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
(FLAGS_TO_PASS): Pass CXX_DIALECT.
* acinclude.m4: Include ax_cxx_compile_stdcxx.m4.
* ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and
AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
2016-10-28 Pedro Alves <palves@redhat.com>
* ax_cxx_compile_stdcxx.m4: New file.
2016-10-28 Pedro Alves <palves@redhat.com>
* maint.c (scoped_command_stats::scoped_command_stats): Clear
m_space_enabled, m_time_enabled and m_symtab_enabled.
2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (bfun_s): New typedef.
(ftrace_update_caller): Print caller in debug dump.
(ftrace_get_caller, ftrace_match_backtrace, ftrace_fixup_level)
(ftrace_compute_global_level_offset, ftrace_connect_bfun)
(ftrace_connect_backtrace, ftrace_bridge_gap, btrace_bridge_gaps): New.
(btrace_compute_ftrace_bts): Pass vector of gaps. Collect gaps.
(btrace_compute_ftrace_pt): Likewise.
(btrace_compute_ftrace): Split into this, ...
(btrace_compute_ftrace_1): ... this, and ...
(btrace_finalize_ftrace): ... this. Call btrace_bridge_gaps.
2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (ftrace_new_return): Start from the previous function's
level if we can't find a matching call for a return.
2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (ftrace_update_function): Update tail call heuristic.
2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (btrace_compute_ftrace_bts, ftrace_add_pt): Allow
leading gaps.
* record-btrace.c (record_btrace_single_step_forward)
(record_btrace_single_step_backward): Jump back to last
instruction if step ends at a gap.
(record_btrace_goto_begin): Skip gaps.
2016-10-28 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (ftrace_add_pt): Fix gap indication. Add warning for non-
contiguous trace and overflow. Rephrase trace decode warning and print
instruction number. Remove dead gaps warning.
(btrace_compute_ftrace_bts): Rephrase warnings and print instruction
number.
2016-10-25 Sandra Loosemore <sandra@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
Pedro Alves <palves@redhat.com>
PR gdb/20569
* exceptions.c (exception_print_same): Moved here from exec.c.
* exceptions.h (exception_print_same): Declare.
* exec.h: Include "symfile-add-flags.h".
(try_open_exec_file): New declaration.
* exec.c (exception_print_same): Moved to exceptions.c.
(try_open_exec_file): New function.
(exec_file_locate_attach): Rename exec_file and full_exec_path
variables to avoid confusion between target and host pathnames.
Move pathname processing logic to exec_file_find. Do not return
early if pathname lookup fails; Call try_open_exec_file.
* infrun.c (follow_exec): Split and rename execd_pathname variable
to avoid confusion between target and host pathnames. Warn if
pathname lookup fails. Pass target pathname to
target_follow_exec, not hostpathname. Call try_open_exec_file.
* main.c (symbol_file_add_main_adapter): New function.
(captured_main_1): Use it.
* solib-svr4.c (open_symbol_file_object): Adjust to pass
symfile_add_flags to symbol_file_add_main.
* solib.c (exec_file_find): Incorporate fallback logic for relative
pathnames formerly in exec_file_locate_attach.
* symfile.c (symbol_file_add_main, symbol_file_add_main_1):
Replace 'from_tty' parameter with a symfile_add_file.
(symbol_file_command): Adjust to pass symfile_add_flags to
symbol_file_add_main.
* symfile.h (symbol_file_add_main): Replace 'from_tty' parameter
with a symfile_add_file.
2016-10-26 Pedro Alves <palves@redhat.com>
* coffread.c (coff_symfile_read): Use symfile_add_flags.
* dbxread.c (dbx_symfile_read): Ditto.
* elfread.c (elf_symfile_read): Ditto.
* inferior.h: Include symfile-add-flags.h.
(struct inferior) <symfile_flags>: Now symfile_add_flags.
* machoread.c (macho_add_oso_symfile, macho_symfile_read_all_oso)
(macho_symfile_read, mipscoff_symfile_read): Use
symfile_add_flags.
* objfile-flags.h: New file.
* objfiles.c (allocate_objfile): Use objfile_flags.
* objfiles.h: Include objfile-flags.h.
(struct objfile) <flags>: Now an objfile_flags.
(OBJF_REORDERED, OBJF_SHARED, OBJF_READNOW, OBJF_USERLOADED)
(OBJF_PSYMTABS_READ, OBJF_MAINLINE, OBJF_NOT_FILENAME): Delete.
Converted to an enum-flags in objfile-flags.h.
(allocate_objfile): Use objfile_flags.
* python/py-objfile.c (objfpy_add_separate_debug_file): Remove
unnecessary local.
* solib.c (solib_read_symbols, solib_add)
(reload_shared_libraries_1): Use symfile_add_flags.
* solib.h: Include "symfile-add-flags.h".
(solib_read_symbols): Use symfile_add_flags.
* symfile-add-flags.h: New file.
* symfile-debug.c (debug_sym_read): Use symfile_add_flags.
* symfile-mem.c (symbol_file_add_from_memory): Use
symfile_add_flags.
* symfile.c (read_symbols, syms_from_objfile_1)
(syms_from_objfile, finish_new_objfile): Use symfile_add_flags.
(symbol_file_add_with_addrs): Use symfile_add_flags and
objfile_flags.
(symbol_file_add_separate): Use symfile_add_flags.
(symbol_file_add_from_bfd, symbol_file_add): Use symfile_add_flags
and objfile_flags.
(symbol_file_add_main_1): : Use objfile_flags. Fix add_flags vs
flags confusion.
(symbol_file_command): Use objfile_flags.
(add_symbol_file_command): Use symfile_add_flags and
objfile_flags.
(clear_symtab_users): Use symfile_add_flags.
* symfile.h: Include "symfile-add-flags.h" and "objfile-flags.h".
(struct sym_fns) <sym_read>: Use symfile_add_flags.
(clear_symtab_users): Use symfile_add_flags.
(enum symfile_add_flags): Delete, moved to symfile-add-flags.h and
converted to enum-flags.
(symbol_file_add, symbol_file_add_from_bfd)
(symbol_file_add_separate): Use symfile_add_flags.
* xcoffread.c (xcoff_initial_scan): Use symfile_add_flags.
2016-10-26 Pedro Alves <palves@redhat.com>
* inferior.h (ALL_NON_EXITED_INFERIORS): New macro.
* infrun.c (do_target_resume): Call target_commit_resume.
(proceed): Defer target_commit_resume while looping over threads,
resuming them. Call target_commit_resume at the end.
* record-btrace.c (record_btrace_commit_resume): New function.
(init_record_btrace_ops): Install it as to_commit_resume method.
* record-full.c (record_full_commit_resume): New function.
(record_full_wait_1): Call the beneath target's to_commit_resume
method.
(init_record_full_ops): Install record_full_commit_resume as
to_commit_resume method.
* remote.c (struct private_thread_info) <last_resume_step,
last_resume_sig, vcont_resumed>: New fields.
(remote_add_thread): Set the new thread's vcont_resumed flag.
(demand_private_info): Delete.
(get_private_info_thread, get_private_info_ptid): New functions.
(remote_update_thread_list): Adjust.
(process_initial_stop_replies): Clear the thread's vcont_resumed
flag.
(remote_resume): If connected in non-stop mode, record the resume
request and return early.
(struct private_inferior): New.
(struct vcont_builder): New.
(vcont_builder_restart, vcont_builder_flush)
(vcont_builder_push_action): New functions.
(MAX_ACTION_SIZE): New macro.
(remote_commit_resume): New function.
(thread_pending_fork_status, is_pending_fork_parent_thread): New
functions.
(check_pending_event_prevents_wildcard_vcont_callback)
(check_pending_events_prevent_wildcard_vcont): New functions.
(process_stop_reply): Adjust. Clear the thread's vcont_resumed
flag.
(init_remote_ops): Install remote_commit_resume.
* target-delegates.c: Regenerate.
* target.c (defer_target_commit_resume): New global.
(target_commit_resume, make_cleanup_defer_target_commit_resume):
New functions.
* target.h (struct target_ops) <to_commit_resume>: New field.
(target_resume): Update comments.
(target_commit_resume): New declaration.
2016-10-26 Pedro Alves <palves@redhat.com>
* inferior.c (exit_inferior_1): Free 'priv'.
2016-10-26 Pedro Alves <palves@redhat.com>
* remote.c (remote_resume_with_hc): New function, factored out
from ...
(remote_resume): ... this. Always try vCont first.
(remote_vcont_resume): Rename to ...
(remote_resume_with_vcont): ... this. Bail out if execution
direction is reverse.
2016-10-25 Pedro Alves <palves@redhat.com>
* dwarf2expr.h (struct dwarf_expr_context) <~dwarf_expr_context>:
Make virtual.
2016-10-25 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR build/20712
* defs.h: Remove obsolete comment
(atof): Remove.
* procfs.c (do_destroy_procinfo_cleanup): Add cast.
(sysset_t_alloc): Likewise.
(proc_set_traced_sysentry): Likewise.
(proc_set_traced_sysexit): Likewise.
[!PIOCLSTATUS && NEW_PROC_API] (do_closedir_cleanup): Likewise.
(proc_get_LDT_entry): Initiate cleanups before returns.
(procfs_wait): Use GDB_SIGNAL_0.
(procfs_corefile_thread_callback): Add cast.
* sol-thread.c (td_log_ftype, td_ta_new_ftype, td_ta_delete_ftype)
(td_init_ftype, td_ta_get_ph_ftype, td_ta_get_nthreads_ftype)
(td_ta_tsd_iter_ftype, td_ta_thr_iter_ftype)
(td_thr_validate_ftype, td_thr_tsd_ftype, td_thr_get_info_ftype)
(td_thr_getfpregs_ftype, td_thr_getxregsize_ftype)
(td_thr_getxregs_ftype, td_thr_sigsetmask_ftype)
(td_thr_setprio_ftype, td_thr_setsigpending_ftype)
(td_thr_setfpregs_ftype, td_thr_setxregs_ftype)
(td_ta_map_id2thr_ftype, td_ta_map_lwp2thr_ftype)
(td_thr_getgregs_ftype, td_thr_setgregs_ftype): New typedefs.
(p_td_log, p_td_ta_new, p_td_ta_delete, p_td_init, p_td_ta_get_ph)
(p_td_ta_get_nthreads, p_td_ta_tsd_iter, p_td_ta_thr_iter)
(p_td_thr_validate, p_td_thr_tsd, p_td_thr_get_info)
(p_td_thr_getfpregs, p_td_thr_getxregsize, p_td_thr_getxregs)
(p_td_thr_sigsetmask, p_td_thr_setprio, p_td_thr_setsigpending)
(p_td_thr_setfpregs, p_td_thr_setxregs, p_td_ta_map_id2thr)
(p_td_ta_map_lwp2thr, p_td_thr_getgregs, p_td_thr_setgregs): Use them.
(ps_pdread): Add cast.
(ps_ptread): Likewise.
(resolve): Likewise.
* top.c (gdb_safe_append_history): Print pid_t as long.
2016-10-25 Pedro Alves <palves@redhat.com>
* common/common-defs.h (__STDC_FORMAT_MACROS): Define.
2016-10-25 Pedro Alves <palves@redhat.com>
* common/new-op.c: Add comment about -fsanitize=address.
2016-10-25 Pedro Alves <palves@redhat.com>
* common/common-defs.h (__STDC_CONSTANT_MACROS)
(__STDC_LIMIT_MACROS): Define.
2016-10-25 Yao Qi <yao.qi@linaro.org>
PR gdb/20716
* common/new-op.c (__has_feature): New macro.
Don't override operator new if asan is used.
2016-10-24 Luis Machado <lgustavo@codesourcery.com>
* exec.c (exec_file_locate_attach): Prevent NULL pointer dereference
when duplicating a string.
2016-10-24 Luis Machado <lgustavo@codesourcery.com>
* exec.c (exception_print_same): Fix string comparison to use
statically-allocated ones.
2016-10-21 Tom Tromey <tom@tromey.com>
* dwarf2expr.h (class dwarf_expr_context)
<get_frame_base, get_frame_cfa, get_tls_address, dwarf_call,
push_dwarf_block_entry_value, get_addr_index, get_object_address>:
Now pure virtual.
* dwarf2-frame.c (class dwarf_expr_executor)
<get_frame_base, get_frame_cfa, get_tls_address, dwarf_call,
push_dwarf_block_entry_value, get_addr_index, get_object_address>:
New methods.
<invalid>: New method.
2016-10-21 Tom Tromey <tom@tromey.com>
* minsyms.h (minimal_symbol_reader::record_full): "copy_name" now
a bool.
(record, record_with_info): Update.
* minsyms.c (record): Fix indentation.
(record_full): Fix indentation. Update for type change.
* elfread.c (record_minimal_symbol): "copy_name" now a bool.
(elf_symtab_read): "copy_names" now a bool.
(elf_rel_plt_read, elf_read_minimal_symbols): Update.
2016-10-21 Tom Tromey <tom@tromey.com>
* main.c: Include <vector>.
(cmdarg_s): Remove typedef. Don't define VEC.
(captured_main_1): Use vector, not VEC. Remove cleanups.
2016-10-21 Tom Tromey <tom@tromey.com>
* dwarf2loc.c (struct dwarf_expr_context_funcs): Don't declare.
(dwarf_expr_read_addr_from_reg, dwarf_expr_get_reg_value)
(dwarf_expr_read_mem, dwarf_expr_frame_base): Rename; turn into
methods.
(get_frame_pc_for_per_cu_dwarf_call): New function.
(dwarf_expr_frame_cfa, dwarf_expr_frame_pc)
(dwarf_expr_tls_address): Rename; turn into methods.
(per_cu_dwarf_call): Remove arguments. Use
get_frame_pc_for_per_cu_dwarf_call.
(dwarf_evaluate_loc_desc): New class.
(dwarf_expr_dwarf_call, dwarf_expr_context)
(dwarf_expr_push_dwarf_reg_entry_value)
(dwarf_expr_get_addr_index, dwarf_expr_get_obj_addr): Rename; turn
into methods.
(dwarf_expr_ctx_funcs): Remove.
(dwarf2_evaluate_loc_desc_full): Update.
(dwarf2_locexpr_baton_eval): Update.
(symbol_needs_eval_context): New class.
(symbol_needs_read_addr_from_reg, symbol_needs_get_reg_value)
(symbol_needs_read_mem, symbol_needs_frame_base)
(symbol_needs_frame_cfa, symbol_needs_tls_address)
(symbol_needs_dwarf_call, needs_dwarf_reg_entry_value): Rename;
turn into methods.
(needs_get_addr_index, needs_get_obj_addr): Remove; turn into
methods.
(symbol_needs_ctx_funcs): Remove.
(dwarf2_loc_desc_get_symbol_read_needs): Update.
* dwarf2expr.h (struct dwarf_expr_context_funcs): Remove; turn
contents into methods.
(struct dwarf_expr_context) <baton, funcs>: Remove.
<read_addr_from_reg, get_reg_value, read_mem, get_frame_base,
get_frame_cfa, get_frame_pc, get_tls_address, dwarf_call,
impl_get_base_type, push_dwarf_block_entry_value, get_addr_index,
get_object_address>: Declare new methods.
(ctx_no_get_frame_base, ctx_no_get_frame_cfa)
(ctx_no_get_frame_pc, ctx_no_get_tls_address, ctx_no_dwarf_call)
(ctx_no_get_base_type, ctx_no_push_dwarf_reg_entry_value)
(ctx_no_get_addr_index): Don't declare.
* dwarf2expr.c (get_base_type): Use impl_get_base_type.
(execute_stack_op): Update.
(ctx_no_get_frame_base, ctx_no_get_frame_cfa)
(ctx_no_get_frame_pc, ctx_no_get_tls_address, ctx_no_dwarf_call)
(ctx_no_get_base_type, ctx_no_push_dwarf_reg_entry_value)
(ctx_no_get_addr_index): Remove; now methods on
dwarf_expr_context.
* dwarf2-frame.c (read_addr_from_reg): Take a frame_info, not a
baton.
(class dwarf_expr_executor): New class.
(get_reg_value, read_mem): Rename, turn into methods.
(execute_stack_op): Use dwarf_expr_executor.
2016-10-21 Tom Tromey <tom@tromey.com>
* dwarf2loc.c (per_cu_dwarf_call)
(dwarf_expr_push_dwarf_reg_entry_value)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval)
(needs_dwarf_reg_entry_value)
(dwarf2_loc_desc_get_symbol_read_needs): Update.
* dwarf2expr.h (dwarf_expr_context) <push_address, eval, fetch,
fetch_address, fetch_in_stack_memory, address_type, grow_stack,
push, stack_empty_p, add_piece, get_base_type, execute_stack_op,
pop>: New method declarations.
(dwarf_expr_push_address, dwarf_expr_eval, dwarf_expr_fetch)
(dwarf_expr_fetch_address, dwarf_expr_fetch_in_stack_memory):
Don't declare.
* dwarf2expr.c (address_type, grow_stack, push, push_address)
(pop, fetch, fetch_address, fetch_in_stack_memory)
(stack_empty_p, add_piece, eval, get_base_type)
(execute_stack_op): Rename. Turn into methods.
* dwarf2-frame.c (execute_stack_op): Update.
2016-10-21 Tom Tromey <tom@tromey.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Stack-allocate
dwarf_expr_context. Remove cleanups.
(dwarf2_locexpr_baton_eval)
(dwarf2_loc_desc_get_symbol_read_needs): Likewise.
* dwarf2expr.h (dwarf_expr_context, ~dwarf_expr_context): Add
constructors and destructors.
(new_dwarf_expr_context, free_dwarf_expr_context)
(make_cleanup_free_dwarf_expr_context): Don't declare.
* dwarf2-frame.c (execute_stack_op): Stack-allocate
dwarf_expr_context. Remove cleanups.
(dwarf_expr_context): Rename from new_dwarf_expr_context. Turn
into constructor.
(free_dwarf_expr_context, free_dwarf_expr_context_cleanup):
Remove.
(~dwarf_expr_context): Rename from
make_cleanup_free_dwarf_expr_context. Turn into destructor.
2016-10-21 Tom Tromey <tom@tromey.com>
* dwarf2loc.c: Include <vector>.
(read_pieced_value, write_pieced_value)
(dwarf2_compile_expr_to_ax): Use std::vector.
2016-10-21 Tom Tromey <tom@tromey.com>
* stack.c (print_stack_frame_to_uiout): Use scoped_restore.
* ui-out.c (make_cleanup_restore_current_uiout)
(restore_current_uiout_cleanup): Remove.
* infrun.c (print_stop_event): Use scoped_restore.
* ui-out.h (make_cleanup_restore_current_uiout): Don't declare.
2016-10-21 Tom Tromey <tom@tromey.com>
* elfread.c (elf_read_minimal_symbols): Use gdb::unique_ptr.
2016-10-21 Tom Tromey <tom@tromey.com>
* cli/cli-dump.c (dump_memory_to_file): Use gdb::unique_ptr.
(restore_binary_file): Likewise.
2016-10-21 Tom Tromey <tom@tromey.com>
* maint.h (scoped_command_stats): New class.
(make_command_stats_cleanup): Don't declare.
* maint.c (struct cmd_stats): Remove.
(~scoped_command_stats): Rename from report_command_stats. Now a
destructor.
(scoped_command_stats): Rename from make_command_stats_cleanup.
Now a constructor.
* main.c (captured_main_1): New function. Use
scoped_command_stats.
(captured_main): Call captured_main_1.
* event-top.c (command_handler): Use scoped_command_stats.
2016-10-21 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (mi_cmd_data_read_memory): Use gdb::unique_ptr.
Remove some cleanups.
2016-10-21 Tom Tromey <tom@tromey.com>
* tui/tui-interp.c (tui_on_normal_stop, tui_on_signal_received)
(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
(tui_on_no_history, tui_on_user_selected_context_changed):
Update.
* top.h (switch_thru_all_uis): New class.
(SWITCH_THRU_ALL_UIS): Rewrite.
(make_cleanup_restore_current_ui, switch_thru_all_uis_init)
(switch_thru_all_uis_cond, switch_thru_all_uis_next): Don't
declare.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_record_changed, mi_inferior_added, mi_inferior_appeared)
(mi_inferior_exit, mi_inferior_removed, mi_on_signal_received)
(mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited)
(mi_on_no_history, mi_on_normal_stop, mi_traceframe_changed)
(mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
(mi_breakpoint_created, mi_breakpoint_deleted)
(mi_breakpoint_modified, mi_output_running_pid, mi_on_resume)
(mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
(mi_memory_changed, mi_user_selected_context_changed): Update.
* infrun.c (all_uis_check_sync_execution_done)
(all_uis_on_sync_execution_starting, normal_stop): Update.
* event-top.c (restore_ui_cleanup)
(make_cleanup_restore_current_ui, switch_thru_all_uis_init)
(switch_thru_all_uis_cond, switch_thru_all_uis_next): Remove.
* cli/cli-interp.c (cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history, cli_on_user_selected_context_changed):
Update.
* breakpoint.c (watchpoint_check): Update.
2016-10-21 Tom Tromey <tom@tromey.com>
* xcoffread.c (record_minimal_symbol, scan_xcoff_symtab): Add
"reader" argument. Update.
(xcoff_initial_scan): Update.
* symfile.h (mdebug_build_psymtabs): Add "reader" argument.
* mipsread.c (mipscoff_symfile_read): Update.
(read_alphacoff_dynamic_symtab): Add "reader" argument. Update.
* minsyms.h (minimal_symbol_reader) <record, record_full>:
Declare.
<m_msym_bunch, m_msym_bunch_index, m_msym_count>: New members.
<record_with_info>: New function, renamed from
prim_record_minimal_symbol_and_info.
* minsyms.c (msym_bunch, msym_bunch_index, msym_count): Remove
globals.
(minimal_symbol_reader): Initialize new members.
(minimal_symbol_reader::record): Renamed from
prim_record_minimal_symbol.
(minimal_symbol_reader::record_full): Renamed from
prim_record_minimal_symbol_full.
(prim_record_minimal_symbol_and_info): Move to minsyms.h; rename.
* mdebugread.c (mdebug_build_psymtabs, parse_partial_symbols)
(record_minimal_symbol): Add "reader" argument. Update.
(elfmdebug_build_psymtabs): Update.
* machoread.c (macho_symtab_add_minsym, macho_symtab_read): Add
"reader" argument. Update.
(macho_symfile_read): Update.
* elfread.c (record_minimal_symbol, elf_symtab_read)
(elf_rel_plt_read): Add "reader" argument. Update.
(elf_read_minimal_symbols): Update.
* dbxread.c (record_minimal_symbol, read_dbx_dynamic_symtab)
(read_dbx_symtab): Add "reader" argument. Update.
(dbx_symfile_read): Update.
* coffread.c (record_minimal_symbol, coff_symtab_read): Add
"reader" argument. Update.
(coff_symfile_read): Update.
* coff-pe-read.h (read_pe_exported_syms): Add "reader" argument.
* coff-pe-read.c (add_pe_exported_sym, add_pe_forwarded_sym)
(read_pe_exported_syms): Add "reader" argument. Update.
2016-10-21 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_initial_scan): Update.
* mipsread.c (mipscoff_symfile_read): Update.
* minsyms.c (minimal_symbol_reader): Add obj argument.
Initialize member.
(install): Remove objfile argument. Update.
* mdebugread.c (elfmdebug_build_psymtabs): Update.
* machoread.c (macho_symfile_read): Update.
* elfread.c (elf_read_minimal_symbols): Update.
* dbxread.c (dbx_symfile_read): Update.
* coffread.c (coff_symfile_read): Update.
* minsyms.h (minimal_symbol_reader): Add m_objfile member.
(constructor): Add objfile argument.
(minimal_symbol_reader::install): Remove objfile argument.
2016-10-21 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_initial_scan): Use
minimal_symbol_reader.
* mipsread.c (mipscoff_symfile_read): Use
minimal_symbol_reader.
* minsyms.h (minimal_symbol_reader): New class.
(init_minimal_symbol_collection)
(make_cleanup_discard_minimal_symbols, install_minimal_symbols):
Don't declare.
* minsyms.c (minimal_symbol_reader): Renamed from
init_minimal_symbol_collection, turned into constructor.
(~minimal_symbol_reader): Renamed from
do_discard_minimal_symbols_cleanup, turned into destructor.
(make_cleanup_discard_minimal_symbols): Remove.
(minimal_symbol_reader::install): Rename form
install_minimal_symbols.
* mdebugread.c (elfmdebug_build_psymtabs): Use
minimal_symbol_reader.
* machoread.c (macho_symfile_read): Use
minimal_symbol_reader.
* elfread.c (elf_read_minimal_symbols): Use
minimal_symbol_reader.
* dbxread.c (dbx_symfile_read): Use minimal_symbol_reader.
* coffread.c (coff_symfile_read): Use
minimal_symbol_reader.
2016-10-21 Tom Tromey <tom@tromey.com>
* top.c (new_ui_command, wait_sync_command_done)
(gdb_readline_wrapper): Use scoped_restore.
* infrun.c (fetch_inferior_event): Use scoped_restore.
* infcall.c (call_thread_fsm_should_stop): Use scoped_restore.
2016-10-21 Tom Tromey <tom@tromey.com>
* utils.c (make_cleanup_restore_ui_file, do_restore_ui_file)
(struct restore_ui_file_closure): Remove.
* utils.h (make_cleanup_restore_ui_file): Don't declare.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Use
scoped_restore.
* top.c (execute_command_to_string): Use scoped_restore.
2016-10-21 Tom Tromey <tom@tromey.com>
* common/scoped_restore.h: New file.
* utils.h: Include scoped_restore.h.
* top.c (execute_command_to_string): Use scoped_restore.
* python/python.c (python_interactive_command): Use
scoped_restore.
(python_command, execute_gdb_command): Likewise.
* printcmd.c (do_one_display): Use scoped_restore.
* mi/mi-main.c (exec_continue): Use scoped_restore.
* mi/mi-cmd-var.c (mi_cmd_var_assign): Use scoped_restore.
* linux-fork.c (checkpoint_command): Use scoped_restore.
* infrun.c (restore_execution_direction): Remove.
(fetch_inferior_event): Use scoped_restore.
* compile/compile.c (compile_file_command): Use
scoped_restore.
(compile_code_command, compile_print_command): Likewise.
* cli/cli-script.c (execute_user_command): Use
scoped_restore.
(while_command, if_command, script_from_file): Likewise.
* arm-tdep.c (arm_insert_single_step_breakpoint): Use
scoped_restore.
2016-10-21 Tom Tromey <tom@tromey.com>
* xcoffread.c (read_xcoff_symtab): Make "filestring" const.
2016-10-21 Sangamesh Mallayya <sangamesh.swamy@in.ibm.com>
Ulrich Weigand <uweigand@de.ibm.com>
* xcoffread.c (read_xcoff_symtab): Make name of current file as
pst->filename instead of _start_ in AIX.
2016-10-21 Philipp Rudo <prudo@linux.vnet.ibm.com>
* solist.h (struct target_so_ops): Delete special_symbol_handling
hook.
* solib.c (solib_add, reload_shared_libraries): Adjust.
* solib-aix.c (solib_aix_special_symbol_handling): Delete
(_initialize_solib_aix): Adjust
* solib-darwin.c (darwin_special_symbol_handling): Delete
(_initialize_darwin_solib): Adjust
* solib-dsbt.c (dsbt_special_symbol_handling): Delete
(_initialize_dsbt_solib): Adjust
* solib-frv.c (frv_special_symbol_handling): Delete
(_initialize_frv_solib): Adjust
* solib-svr4.c (svr4_special_symbol_handling): Delete
(_initialize_svr4_solib): Adjust
* solib-target.c (solib_target_special_symbol_handling): Delete
(_initialize_solib_target): Adjust
2016-10-20 Yao Qi <yao.qi@linaro.org>
* configure.tgt: Don't configure if target is *-*-vxworks*.
2016-10-19 Pedro Alves <palves@redhat.com>
* config.in: Regenerate.
2016-10-18 Pedro Alves <palves@redhat.com>
* common/common-defs.h (__STDC_CONSTANT_MACROS)
(__STDC_LIMIT_MACROS): Delete.
2016-10-18 Pedro Alves <palves@redhat.com>
* gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
2692e23a48e21f6daa029e8af9f1a143b7532f47.
* gnulib/configure, gnulib/config.in, gnulib/aclocal.m4:
Regenerate.
* gnulib/import/Makefile: Update.
* gnulib/import/alloca: Update.
* gnulib/import/basename-lgpl: Update.
* gnulib/import/canonicalize-lgpl: Update.
* gnulib/import/config: Update.
* gnulib/import/dirent: Update.
* gnulib/import/dirfd: Update.
* gnulib/import/dirname-lgpl: Update.
* gnulib/import/dirname.h: Update.
* gnulib/import/dosname.h: Update.
* gnulib/import/errno: Update.
* gnulib/import/extra/snippet/arg-nonnull.h: Update.
* gnulib/import/extra/snippet/c++defs.h: Update.
* gnulib/import/extra/snippet/warn-on-use.h: Update.
* gnulib/import/extra/update-copyright: Update.
* gnulib/import/flexmember.h: Update.
* gnulib/import/float+.h: Update.
* gnulib/import/float: Update.
* gnulib/import/float: Update.
* gnulib/import/fnmatch: Update.
* gnulib/import/fnmatch: Update.
* gnulib/import/fnmatch_loop: Update.
* gnulib/import/fpucw.h: Update.
* gnulib/import/frexp: Update.
* gnulib/import/frexpl: Update.
* gnulib/import/gettimeofday: Update.
* gnulib/import/hard-locale: Update.
* gnulib/import/hard-locale.h: Update.
* gnulib/import/inttypes: Update.
* gnulib/import/isnan: Update.
* gnulib/import/isnand-nolibm.h: Update.
* gnulib/import/isnand: Update.
* gnulib/import/isnanl-nolibm.h: Update.
* gnulib/import/isnanl: Update.
* gnulib/import/itold: Update.
* gnulib/import/limits: Update.
* gnulib/import/localcharset: Update.
* gnulib/import/localcharset.h: Update.
* gnulib/import/lstat: Update.
* gnulib/import/m4/00gnulib: Update.
* gnulib/import/m4/absolute-header: Update.
* gnulib/import/m4/alloca: Update.
* gnulib/import/m4/canonicalize: Update.
* gnulib/import/m4/codeset: Update.
* gnulib/import/m4/configmake: Update.
* gnulib/import/m4/dirent_h: Update.
* gnulib/import/m4/dirfd: Update.
* gnulib/import/m4/dirname: Update.
* gnulib/import/m4/double-slash-root: Update.
* gnulib/import/m4/eealloc: Update.
* gnulib/import/m4/errno_h: Update.
* gnulib/import/m4/exponentd: Update.
* gnulib/import/m4/exponentl: Update.
* gnulib/import/m4/extensions: Update.
* gnulib/import/m4/extern-inline: Update.
* gnulib/import/m4/fcntl-o: Update.
* gnulib/import/m4/flexmember: Update.
* gnulib/import/m4/float_h: Update.
* gnulib/import/m4/fnmatch: Update.
* gnulib/import/m4/fpieee: Update.
* gnulib/import/m4/frexp: Update.
* gnulib/import/m4/frexpl: Update.
* gnulib/import/m4/gettimeofday: Update.
* gnulib/import/m4/glibc21: Update.
* gnulib/import/m4/gnulib-cache: Update.
* gnulib/import/m4/gnulib-common: Update.
* gnulib/import/m4/gnulib-comp: Update.
* gnulib/import/m4/gnulib-tool: Update.
* gnulib/import/m4/hard-locale: Update.
* gnulib/import/m4/include_next: Update.
* gnulib/import/m4/inttypes-pri: Update.
* gnulib/import/m4/inttypes: Update.
* gnulib/import/m4/isnand: Update.
* gnulib/import/m4/isnanl: Update.
* gnulib/import/m4/largefile: Update.
* gnulib/import/m4/limits-h: Update.
* gnulib/import/m4/localcharset: Update.
* gnulib/import/m4/locale-fr: Update.
* gnulib/import/m4/locale-ja: Update.
* gnulib/import/m4/locale-zh: Update.
* gnulib/import/m4/longlong: Update.
* gnulib/import/m4/lstat: Update.
* gnulib/import/m4/malloc: Update.
* gnulib/import/m4/malloca: Update.
* gnulib/import/m4/math_h: Update.
* gnulib/import/m4/mbrtowc: Update.
* gnulib/import/m4/mbsinit: Update.
* gnulib/import/m4/mbsrtowcs: Update.
* gnulib/import/m4/mbstate_t: Update.
* gnulib/import/m4/memchr: Update.
* gnulib/import/m4/memmem: Update.
* gnulib/import/m4/mmap-anon: Update.
* gnulib/import/m4/multiarch: Update.
* gnulib/import/m4/nocrash: Update.
* gnulib/import/m4/off_t: Update.
* gnulib/import/m4/pathmax: Update.
* gnulib/import/m4/rawmemchr: Update.
* gnulib/import/m4/readlink: Update.
* gnulib/import/m4/rename: Update.
* gnulib/import/m4/rmdir: Update.
* gnulib/import/m4/signal_h: Update.
* gnulib/import/m4/ssize_t: Update.
* gnulib/import/m4/stat: Update.
* gnulib/import/m4/stdbool: Update.
* gnulib/import/m4/stddef_h: Update.
* gnulib/import/m4/stdint: Update.
* gnulib/import/m4/stdio_h: Update.
* gnulib/import/m4/stdlib_h: Update.
* gnulib/import/m4/strchrnul: Update.
* gnulib/import/m4/string_h: Update.
* gnulib/import/m4/strstr: Update.
* gnulib/import/m4/strtok_r: Update.
* gnulib/import/m4/sys_socket_h: Update.
* gnulib/import/m4/sys_stat_h: Update.
* gnulib/import/m4/sys_time_h: Update.
* gnulib/import/m4/sys_types_h: Update.
* gnulib/import/m4/time_h: Update.
* gnulib/import/m4/unistd_h: Update.
* gnulib/import/m4/warn-on-use: Update.
* gnulib/import/m4/wchar_h: Update.
* gnulib/import/m4/wchar_t: Update.
* gnulib/import/m4/wctype_h: Update.
* gnulib/import/m4/wint_t: Update.
* gnulib/import/malloc: Update.
* gnulib/import/malloca: Update.
* gnulib/import/malloca.h: Update.
* gnulib/import/math: Update.
* gnulib/import/math: Update.
* gnulib/import/mbrtowc: Update.
* gnulib/import/mbsinit: Update.
* gnulib/import/mbsrtowcs-impl.h: Update.
* gnulib/import/mbsrtowcs-state: Update.
* gnulib/import/mbsrtowcs: Update.
* gnulib/import/memchr: Update.
* gnulib/import/memmem: Update.
* gnulib/import/pathmax.h: Update.
* gnulib/import/rawmemchr: Update.
* gnulib/import/readlink: Update.
* gnulib/import/ref-add.sin: Update.
* gnulib/import/ref-del.sin: Update.
* gnulib/import/rename: Update.
* gnulib/import/rmdir: Update.
* gnulib/import/same-inode.h: Update.
* gnulib/import/signal: Update.
* gnulib/import/stat: Update.
* gnulib/import/stdbool: Update.
* gnulib/import/stddef: Update.
* gnulib/import/stdint: Update.
* gnulib/import/stdio: Update.
* gnulib/import/stdlib: Update.
* gnulib/import/str-two-way.h: Update.
* gnulib/import/strchrnul: Update.
* gnulib/import/streq.h: Update.
* gnulib/import/string: Update.
* gnulib/import/stripslash: Update.
* gnulib/import/strnlen1: Update.
* gnulib/import/strnlen1.h: Update.
* gnulib/import/strstr: Update.
* gnulib/import/strtok_r: Update.
* gnulib/import/sys_stat: Update.
* gnulib/import/sys_time: Update.
* gnulib/import/sys_types: Update.
* gnulib/import/time: Update.
* gnulib/import/unistd: Update.
* gnulib/import/unistd: Update.
* gnulib/import/verify.h: Update.
* gnulib/import/wchar: Update.
* gnulib/import/wctype: Update.
* gnulib/import/flexmember.h: New file.
* gnulib/import/hard-locale.c: New file.
* gnulib/import/hard-locale.h: New file.
* gnulib/import/limits.in.h: New file.
* gnulib/import/m4/flexmember.m4: New file.
* gnulib/import/m4/hard-locale.m4: New file.
* gnulib/import/m4/limits-h.m4: New file.
2016-10-18 Pedro Alves <palves@redhat.com>
* common/common-defs.h: Include "gdb_unique_ptr.h".
* common/gdb_unique_ptr.h: New.
2016-10-18 Maciej W. Rozycki <macro@imgtec.com>
* i386-tdep.c (i386_mpx_info_bounds): Make sure the architecture
is `bfd_arch_i386' before proceeding.
(i386_mpx_set_bounds): Likewise.
2016-10-18 Maciej W. Rozycki <macro@imgtec.com>
* tilegx-tdep.c (tilegx_analyze_prologue): Use the `long long'
type for `operands'.
2016-10-17 Simon Marchi <simon.marchi@ericsson.com>
* mi/mi-main.c (mi_cmd_trace_save): Check if argument is present
before using it.
2016-10-17 Pedro Alves <palves@redhat.com>
* charset.h (class wchar_iterator) [PHONY_ICONV] <m_desc>: Use
'int' as type.
2016-10-14 Sangamesh Mallayya <sangamesh.swamy@in.ibm.com>
Ulrich Weigand <uweigand@de.ibm.com>
* solib-aix.c (solib_aix_bfd_open): Call solib_find so that sysroot
path is set properly if program has a dependency on .a archive and
sysroot is set via set sysroot command.
2016-10-14 Markus Metzger <markus.t.metzger@intel.com>
* nat/linux-btrace.c: Remove leftover comment.
2016-10-14 Eli Zaretskii <eliz@gnu.org>
* common/common-defs.h [HAVE_STRINGS_H]: Include strings.h if
available, to get prototypes of 'strcasecmp' and 'strncasecmp'.
2016-10-13 Pedro Alves <palves@redhat.com>
* contrib/ari/gdb_ari.sh (boolean): Suggest bool instead.
(false, true): Remove checks.
2016-10-12 Tom Tromey <tom@tromey.com>
* machoread.c (macho_symfile_read_all_oso): Use std::string.
2016-10-12 Tom Tromey <tom@tromey.com>
* tracepoint.c (trace_dump_command): Remove unnecessary
null_cleanup.
2016-10-12 Tom Tromey <tom@tromey.com>
* valprint.c (generic_emit_char, count_next_character)
(generic_printstr): Update.
* charset.c (struct wchar_iterator): Move to charset.h.
(wchar_iterator::wchar_iterator): Rename from
make_wchar_iterator, turn into a constructor.
(wchar_iterator::~wchar_iterator): Rename from
do_cleanup_iterator, turn into a destructor.
(make_cleanup_wchar_iterator): Remove.
(wchar_iterator::iterate): Rename from wchar_iterate. Remove
"iter" argument. Update.
* charset.h: Include <vector>.
(class wchar_iterator): New class, from old struct
wchar_iterator.
(make_wchar_iterator, make_cleanup_wchar_iterator): Don't
declare.
2016-10-12 Tom Tromey <tom@tromey.com>
* selftest.c: Include <vector>, not "vec.h".
(self_test_function_ptr): Remove.
(tests): Now a std::vector.
(register_self_test, run_self_tests): Update.
2016-10-13 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* tid-parse.h (tid_range_parser): New class.
(enum tid_range_state): Move into tid_range_parser's scope.
Remove TID_RANGE_ prefix from all values.
(tid_range_parser_get_tid, tid_range_parser_get_tid_range)
(tid_range_parser_star_range, tid_range_parser_finished)
(tid_range_parser_skip, tid_range_parser_qualified): Don't
declare.
(tid_is_in_list): Update comment.
* tid-parse.c (tid_range_parser::tid_range_parser): New.
(init, finished, get_string, skip, tid_is_qualified)
(get_tid_or_range, get_tid_range, get_tid, star_range): Rename;
turn into methods.
(tid_is_in_list): Adjust.
* cli/cli-utils.h (number_or_range_parser): New class.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Don't declare.
* cli/cli-utils.c
(number_or_range_parser::number_or_range_parser): New.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Rename; turn into methods.
(number_is_in_list): Adjust.
* breakpoint.c (map_breakpoint_numbers): Adjust. Use bool.
(trace_pass_command, get_tracepoint_by_number): Adjust.
* breakpoint.h (get_tracepoint_by_number): Adjust.
* inferior.c (detach_inferior_command, kill_inferior_command)
(remove_inferior_command): Adjust.
* linespec.c (decode_line_2): Adjust.
* memattr.c (mem_enable_command, mem_disable_command)
(mem_delete_command): Adjust.
* printcmd.c (map_display_numbers): Adjust.
* reverse.c (delete_bookmark_command, bookmarks_info): Adjust.
* thread.c (thread_apply_command): Adjust.
2016-10-12 Anton Kolesov <anton.kolesov@synopsys.com>
* arc-newlib-tdep.c: New file.
* configure.tgt: Add newlib support for ARC.
2016-10-12 Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.h (struct gdbarch_tdep) <jb_pc>: New field.
* arc-tdep.c (arc_get_longjmp_target): New function.
(arc_gdbarch_init): Set get_longjmp_target if jb_pc is non-negative.
(arc_dump_tdep): Print jb_pc.
2016-10-12 Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.h (struct gdbarch_tdep): New.
* arc-tdep.c (arc_gdbarch_init): Allocate gdbarch_tdep.
2016-10-12 Yao Qi <yao.qi@linaro.org>
PR tdep/20682
* aarch64-tdep.c: Replace 32 with AARCH64_D_REGISTER_COUNT.
(aarch64_analyze_prologue): Extend array 'regs' for D registers.
Assert that operand 0 and 1 can be X or D registers. Update
register number for D registers. Update registers in frame
cache.
* aarch64-tdep.h (AARCH64_D_REGISTER_COUNT): New macro.
2016-10-10 Yao Qi <yao.qi@linaro.org>
* arch/arm.h (enum arm_breakpoint_kinds): New.
* arm-tdep.c (arm_remote_breakpoint_from_pc): Use
ARM_BP_KIND_THUMB2.
2016-10-10 Yao Qi <yao.qi@linaro.org>
* m32c-tdep.c (m32c_gdbarch_init): Rename local 'arch' by
'gdbarch'.
2016-10-10 Yao Qi <yao.qi@linaro.org>
* v850-tdep.c (v850_breakpoint_from_pc): Use the right
breakpoint instruction.
(v850_dbtrap_breakpoint_from_pc): Remove.
(v850_gdbarch_init): Update.
2016-10-08 Simon Marchi <simon.marchi@polymtl.ca>
* ui-out.c (push_level): Remove "id" parameter.
(ui_out_begin): Update call.
2016-10-07 Joel Brobecker <brobecker@adacore.com>
GDB 7.12 released.
2016-10-07 Markus Metzger <markus.t.metzger@intel.com>
* python/python.c (gdbpy_decode_line): Call
string_to_event_location_basic instead of new_linespec_location.
2016-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_supports_multi_process): New function, moved
from...
* target.h (target_supports_multi_process): ... here. Remove
macro.
* target/target.h (target_supports_multi_process): New prototype.
2016-10-06 Pedro Alves <palves@redhat.com>
* cp-valprint.c (vtbl_ptr_name): Write "extern const" instead of
EXPORTED_CONST.
* stub-termcap.c: Remove __cplusplus checks.
* common/common-defs.h [!__cplusplus] (EXTERN_C, EXTERN_C_PUSH,
EXTERN_C_POP): Delete.
* common/common-exceptions.h (GDB_XCPT_SJMP): Update comments.
(GDB_XCPT) [!__cplusplus]: Delete.
(throw_exception, throw_exception_sjlj): Update comments.
* guile/guile-internal.h (as_a_scm_t_subr) [!__cplusplus]: Delete.
* guile/guile.c (extension_language_guile): Write "extern const"
instead of EXPORTED_CONST.
* features/feature_to_c.sh: Don't emit !__cplusplus code. Write
"extern const" instead of EXPORTED_CONST.
2016-10-06 Doug Evans <dje@google.com>
* python/py-value.c (valpy_long): Handle unsigned values.
2016-10-06 Simon Marchi <simon.marchi@ericsson.com>
* frame.h: Forward-declare struct ui_out.
2016-10-06 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Remove Java test maintainer.
* varobj.h (java_varobj_ops): Don't declare.
* valprint.h (struct value_print_options)
<pascal_static_field_print>: Update comment.
* utils.c (producer_is_gcc): Remove java reference.
* symtab.h (struct general_symbol_info): Remove java references.
(SYMBOL_SEARCH_NAME): Likewise.
* objfiles.c (allocate_objfile): Update comment.
* linespec.c (find_linespec_symbols): Remove java references.
* gnu-v3-abi.c (gnuv3_rtti_type, gnuv3_baseclass_offset): Remove
java references.
* gdbtypes.h (struct cplus_struct_type) <is_java>: Remove.
(TYPE_CPLUS_REALLY_JAVA): Remove.
* c-varobj.c (enum vsections): Update comment.
* symtab.c (symbol_set_language, symbol_set_names)
(symbol_natural_name, symbol_demangled_name)
(demangle_for_lookup, symbol_matches_domain)
(default_make_symbol_completion_list_break_on_1): Remove java
references.
(JAVA_PREFIX, JAVA_PREFIX_LEN): Remove.
* psymtab.c (match_partial_symbol, psymtab_search_name)
(lookup_partial_symbol): Remove java references.
* dwarf2read.c (find_slot_in_mapped_hash): Remove java references.
(add_partial_symbol, dwarf2_compute_name, dwarf2_physname)
(dwarf2_add_member_fn, is_vtable_name, read_structure_type)
(process_structure_scope, read_subroutine_type)
(read_subrange_type, load_partial_dies)
(new_symbol_full, determine_prefix, typename_concat)
(dwarf2_name): Remove java references.
(set_cu_language): Treat Java as C++.
* c-typeprint.c (c_type_print_args): Remove java reference.
* defs.h (enum language) <language_java>: Remove.
* Makefile.in (SFILES, HFILES_NO_SRCDIR, COMMON_OBS, YYFILES)
(YYOBJ, local-maintainer-clean): Don't mention java files.
* jv-exp.y, jv-lang.c, jv-lang.h, jv-typeprint.c, jv-valprint.c,
jv-varobj.c: Remove.
2016-10-06 Maciej W. Rozycki <macro@imgtec.com>
* mips-tdep.c (mips_pseudo_register_type): Make FCRs always
32-bit.
2016-10-06 Maciej W. Rozycki <macro@imgtec.com>
* mips-tdep.c (mips_pseudo_register_type): Rearrange comments
throughout.
2016-10-06 Markus Metzger <markus.t.metzger@intel.com>
* stack.c (frame_info): Call val_print_not_saved instead of
val_print_unavailable if frame_id check fails.
2016-10-06 Pedro Alves <palves@redhat.com>
* jit.c (free_objfile_data): Delete the JIT breakpoint and clear
the cached code address.
2016-10-06 Doug Evans <dje@google.com>
* features/aarch64-core.xml (cpsr_flags): Elide "type" and specify
"end" in all fields.
* features/aarch64.c: Regenerate.
* features/i386/32bit-mpx.xml (_bndcfgu): Specify type of "preserved"
and "enabled" fields. Correct size of "enabled" field.
* features/i386/64bit-mpx.xml (_bndcfgu): Specify type of "preserved"
and "enabled" fields.
* features/i386/i386-avx-mpx-linux.c: Regenerate.
* features/i386/i386-avx-mpx.c: Regenerate.
* features/i386/i386-avx512-linux.c: Regenerate.
* features/i386/i386-avx512.c: Regenerate.
* features/i386/i386-mpx-linux.c: Regenerate.
* features/i386/i386-mpx.c: Regenerate.
* features/arc-arcompact.c: Regenerate.
* features/arc-v2.c: Regenerate.
* xml-tdesc.c (tdesc_start_field): Require "end" spec. Single bit
fields default to "bool" type.
Revert 2016-03-15 Doug Evans <dje@google.com>
* features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
* features/i386/32bit-sse.xml (i386_eflags): Ditto.
* features/i386/64bit-core.xml (i386_eflags): Ditto.
* features/i386/64bit-sse.xml (i386_eflags): Ditto.
* features/i386/x32-core.xml (i386_eflags): Ditto.
2016-10-05 Tom Tromey <tom@tromey.com>
PR breakpoints/20653:
* location.c (string_to_explicit_location): Use NULL, not '\0'.
2016-10-05 Tom Tromey <tom@tromey.com>
PR symtab/20652:
* psymtab.c (psymbol_compare): Correctly compare "ginfo.value"
fields.
2016-10-05 Andreas Arnez <arnez@linux.vnet.ibm.com>
* dwarf2expr.c (dwarf_expr_require_composition): Allow
DW_OP_GNU_uninit.
(execute_stack_op): Use dwarf_expr_require_composition instead of
copying its logic.
2016-10-05 Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.c (arc_frame_prev_register): Remove annoying log message.
2016-10-05 Yao Qi <yao.qi@linaro.org>
* features/Makefile (WHICH): Add
rs6000/powerpc-isa205-32l, rs6000/powerpc-isa205-64l,
rs6000/powerpc-isa205-altivec32l, rs6000/powerpc-isa205-altivec64l,
rs6000/powerpc-isa205-vsx32l and rs6000/powerpc-isa205-vsx64l.
* regformats/rs6000/powerpc-isa205-32l.dat: Regenerated.
* regformats/rs6000/powerpc-isa205-64l.dat: Likewise.
* regformats/rs6000/powerpc-isa205-altivec32l.dat: Likewise.
* regformats/rs6000/powerpc-isa205-altivec64l.dat: Likewise.
* regformats/rs6000/powerpc-isa205-vsx32l.dat: Likewise.
* regformats/rs6000/powerpc-isa205-vsx64l.dat: Likewise.
2016-10-05 Yao Qi <yao.qi@linaro.org>
* features/Makefile (XMLTOC): Add s390-tevx-linux64.xml,
s390-vx-linux64.xml, s390x-tevx-linux64.xml and
s390x-vx-linux64.xml.
2016-10-05 Yao Qi <yao.qi@linaro.org>
* features/Makefile: Remove i386/*-expedite. Add i386-expedite,
amd64-expedite, and x32-expedite.
2016-10-05 Terry Guo <terry.guo@arm.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Adjust includes.
* features/Makefile (WHICH): Add "arm/" directory to arm
target descriptions.
(XMLTOC): Likewise.
(arm/arm-with-iwmmxt.dat): Adjust the path for
dependencies.
* features/arm-core.xml: Moved to ...
* features/arm/arm-core.xml: ... it.
* features/arm-fpa.xml: Moved to ...
* features/arm/arm-fpa.xml: ... it.
* features/arm-m-profile.xml: Moved to ...
* features/arm/arm-m-profile.xm: ... it.
* features/arm-vfpv2.xml: Moved to ...
* features/arm/arm-vfpv2.xm: ... it.
* features/arm-vfpv3.xml: Moved to ...
* features/arm/arm-vfpv3.xml: ... it.
* features/arm-with-iwmmxt.c: Moved to ...
* features/arm/arm-with-iwmmxt.c: ... it.
* features/arm-with-iwmmxt.xml: Moved to ...
* features/arm/arm-with-iwmmxt.xml: ... it.
* features/arm-with-m-fpa-layout.c: Moved to ...
* features/arm/arm-with-m-fpa-layout.c: ... it.
* features/arm-with-m-fpa-layout.xml: Moved to ...
* features/arm/arm-with-m-fpa-layout.xml: ... it.
* features/arm-with-m-vfp-d16.c: Moved to ...
* features/arm/arm-with-m-vfp-d16.c: ... it.
* features/arm-with-m-vfp-d16.xml: Moved to ...
* features/arm/arm-with-m-vfp-d16.xml: ... it.
* features/arm-with-m.c: Moved to ...
* features/arm/arm-with-m.c: ... it.
* features/arm-with-m.xml: Moved to ...
* features/arm/arm-with-m.xm: ... it.
* features/arm-with-neon.c: Moved to ...
* features/arm/arm-with-neon.c: ... it.
* features/arm-with-neon.xml: Moved to ...
* features/arm/arm-with-neon.xml: ... it.
* features/arm-with-vfpv2.c: Moved to ...
* features/arm/arm-with-vfpv2.c: ... it.
* features/arm-with-vfpv2.xml: Moved to ...
* features/arm/arm-with-vfpv2.xml: ... it.
* features/arm-with-vfpv3.c: Moved to ...
* features/arm/arm-with-vfpv3.c: ... it.
* features/arm-with-vfpv3.xml: Moved to ...
* features/arm/arm-with-vfpv3.xml: ... it.
* features/xscale-iwmmxt.xml: Moved to ...
* features/arm/xscale-iwmmxt.xml: ... it.
2016-10-03 Antoine Tremblay <antoine.tremblay@ericsson.com>
2016-10-03 Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20487
* NEWS: Mention new frame field of =thread-selected event.
* cli/cli-decode.c (add_cmd): Initialize c->suppress_notification.
(add_com_suppress_notification): New function definition.
(cmd_func): Set and restore the suppress_notification flag.
* cli/cli-deicode.h (struct cmd_list_element)
<suppress_notification>: New field.
* cli/cli-interp.c (cli_suppress_notification): New global variable.
(cli_on_user_selected_context_changed): New function.
(_initialize_cli_interp): Attach to user_selected_context_changed
observer.
* command.h (struct cli_suppress_notification): New structure.
(cli_suppress_notification): New global variable declaration.
(add_com_suppress_notification): New function declaration.
* defs.h (enum user_selected_what_flag): New enum.
(user_selected_what): New enum flag type.
* frame.h (print_stack_frame_to_uiout): New function declaration.
* gdbthread.h (print_selected_thread_frame): New function declaration.
* inferior.c (print_selected_inferior): New function definition.
(inferior_command): Remove printing of inferior/thread/frame switch
notifications, notify user_selected_context_changed observer.
* inferior.h (print_selected_inferior): New function declaration.
* mi/mi-cmds.c (struct mi_cmd): Add user_selected_context
suppression to stack-select-frame and thread-select commands.
* mi/mi-interp.c (struct mi_suppress_notification)
<user_selected_context>: Initialize.
(mi_user_selected_context_changed): New function definition.
(_initialize_mi_interp): Attach to user_selected_context_changed.
* mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply.
(mi_execute_command): Handle notification suppression. Notify
user_selected_context_changed observer on thread change instead of printing
event directly. Don't send it if command already sends the notification.
(command_notifies_uscc_observer): New function.
(mi_cmd_execute): Don't handle notification suppression.
* mi/mi-main.h (struct mi_suppress_notification)
<user_selected_context>: New field.
* stack.c (print_stack_frame_to_uiout): New function definition.
(select_frame_command): Notify user_selected_context_changed
observer.
(frame_command): Call print_selected_thread_frame if there's no frame
change or notify user_selected_context_changed observer if there is.
(up_command): Notify user_selected_context_changed observer.
(down_command): Likewise.
(_initialize_stack): Suppress user_selected_context notification for
command select-frame.
* thread.c (thread_command): Notify
user_selected_context_changed if the thread has changed, print
thread info directly if it hasn't.
(do_captured_thread_select): Do not print thread switch event.
(print_selected_thread_frame): New function definition.
* tui/tui-interp.c (tui_on_user_selected_context_changed):
New function definition.
(_initialize_tui_interp): Attach to user_selected_context_changed
observer.
2016-09-29 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/20609 - attach of JIT-debug-enabled inf 7.11.1 regression
* exec.c (exec_file_locate_attach): Add parameter defer_bp_reset.
Use it.
* gdbcore.h (exec_file_locate_attach): Add parameter defer_bp_reset.
* infcmd.c (setup_inferior): Update caller.
* remote.c (remote_add_inferior): Likewise.
2016-09-28 Pedro Alves <palves@redhat.com>
* infcall.c (run_inferior_call): Remove input from the event
loop while running the infcall.
2016-09-27 Fredrik Hederstierna <fredrik.hederstierna@verisure.com>
* arm-tdep.c (arm_m_addr_is_magic): New function.
(arm_addr_bits_remove): Call arm_m_addr_is_magic.
(arm_m_exception_unwind_sniffer): Likewise.
2016-09-23 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (windows_delete_thread): Adjusting call to
target_mourn_inferior to include ptid_t argument.
2016-09-23 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_dyn_string_delete): Remove declaration.
* utils.c: Don't include dyn-string.h.
(do_dyn_string_delete, make_cleanup_dyn_string_delete): Remove.
* cli/cli-cmds.c: Include <string>. Don't include dyn-string.h.
(argv_to_string): Rename. Change return type to std::string.
(alias_command): Use std::string.
2016-09-23 Tom Tromey <tom@tromey.com>
* objfiles.c: Include <vector>.
(objfile_relocate): Use std::vector.
2016-09-23 Tom Tromey <tom@tromey.com>
* rust-lang.c: Include <string> and <vector>.
(rust_evaluate_funcall): Use std::vector, std::string.
(rust_evaluate_subexp): Use std::string.
(rust_lookup_symbol_nonlocal): Use std::string.
2016-09-23 Tom Tromey <tom@tromey.com>
* cp-namespace.c: Include <string>.
(cp_search_static_and_baseclasses)
(cp_lookup_symbol_imports_or_template, find_symbol_in_baseclass):
Use std::string.
2016-09-23 Tom Tromey <tom@tromey.com>
* break-catch-sig.c: Include <string>.
(signal_catchpoint_print_one): Use std::string.
2016-09-23 Tom Tromey <tom@tromey.com>
* utils.c (struct restore_ui_out_closure): Remove.
* objfiles.h (terminate_minimal_symbol_table): Don't declare.
2016-09-23 Yao Qi <yao.qi@linaro.org>
* nat/linux-osdata.c (linux_xfer_osdata_threads): Replace
sprintf with xsnprintf.
(linux_xfer_osdata_fds): Likewise.
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(COMMON_OBS): Add common/new-op.o.
(new-op.o): New rule.
* common/common-exceptions.h: Include <new>.
(struct gdb_quit_bad_alloc): New type.
* common/new-op.c: New file.
2016-09-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op31): Fix
regcache_raw_read_unsigned call using the correct parameter type.
2016-09-22 Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.c: Fix ARI warning for printf(%p).
2016-09-21 Anton Kolesov <anton.kolesov@synopsys.com>
* MAINTAINERS (Write After Approval): Add Anton Kolesov.
2016-09-21 Anton Kolesov <anton.kolesov@synopsys.com>
* Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
(HFILES_NO_SRCDIR): Add arc-tdep.h.
(ALLDEPFILES): Add arc-tdep.c.
* NEWS: Mention new ARC port.
* configure.tgt: Add ARC.
* arc-tdep.c: New file.
* arc-tdep.h: New file.
* features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
* features/arc-v2.xml: New file.
* features/arc-v2.c: New file (generated).
* features/arc-arcompact.xml: New file.
* features/arc-arcompact.c: New file (generated).
2016-09-21 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op63): Fix return of instruction
handlers.
2016-09-21 Tom Tromey <tom@tromey.com>
PR gdb/20604:
* top.h (quit_force): Update.
* top.c (quit_force): Changed type of first argument. Don't
evaluate expression. Pass NULL to kill_or_detach.
* cli/cli-cmds.c (quit_command): Evaluate "args".
2016-09-21 Simon Marchi <simon.marchi@ericsson.com>
* .gitignore: Ignore more files.
* data-directory/.gitignore: Likewise.
2016-09-21 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (PPC_DQ): New macro.
(ppc_process_record_op4): Add Power ISA 3.0 instructions.
(ppc_process_record_op19): Likewise.
(ppc_process_record_op31): Likewise.
(ppc_process_record_op59): Likewise.
(ppc_process_record_op60): Likewise.
(ppc_process_record_op63): Likewise.
(ppc_process_record): Likewise.
(ppc_process_record_op61): New function.
2016-09-21 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_collect): Keep
bits 20 to 23.
2016-09-20 Tom Tromey <tom@tromey.com>
* python/py-value.c (convert_value_from_python): Make PyInt_Check
conditional on Python 2.
* python/py-arch.c (archpy_disassemble): Make PyInt_Check
conditional on Python 2.
2016-09-20 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op31): Fix record of Store String
Word instructions.
2016-09-20 Sergio Durigan Junior <sergiodj@redhat.com>
* fork-inferior.c (startup_inferior): Pass 'event_ptid' instead of
'resume_ptid' to 'target_mourn_inferior'. Fix regression
introduced by my last commit.
2016-09-19 Pedro Alves <palves@redhat.com>
* common/gdb_locale.h [!ENABLE_NLS] (gettext, dgettext, dcgettext,
textdomain, bindtextdomain): Delete macros.
* main.c (captured_main) [!ENABLE_NLS]: Skip bintextdomain and
textdomain calls.
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* darwin-nat.c (darwin_kill_inferior): Adjusting call to
target_mourn_inferior to include ptid_t argument.
* fork-child.c (startup_inferior): Likewise.
* gnu-nat.c (gnu_kill_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_kill): Likewise.
* infrun.c (handle_inferior_event_1): Likewise.
* linux-nat.c (linux_nat_attach): Likewise.
(linux_nat_kill): Likewise.
* nto-procfs.c (interrupt_query): Likewise.
(procfs_interrupt): Likewise.
(procfs_kill_inferior): Likewise.
* procfs.c (procfs_kill_inferior): Likewise.
* record.c (record_mourn_inferior): Likewise.
* remote-sim.c (gdbsim_kill): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_kill): Likewise.
* target.c (target_mourn_inferior): Change declaration to accept
new ptid_t argument; use gdb_assert on it.
* target.h (target_mourn_inferior): Move function prototype from
here...
* target/target.h (target_mourn_inferior): ... to here. Adjust it
to accept new ptid_t argument.
* windows-nat.c (get_windows_debug_event): Adjusting call to
target_mourn_inferior to include ptid_t argument.
2016-09-18 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c: Include <algorithm>.
2016-09-18 Pedro Alves <palves@redhat.com>
* breakpoint.c (hardware_watchpoint_inserted_in_range): Explicitly
specify the std:min/std::max specialization.
* exec.c (section_table_read_available_memory): Likewise.
* remote.c (remote_read_qxfer): Likewise.
* target.c (simple_verify_memory): Likewise.
2016-09-16 Simon Marchi <simark@simark.ca>
* infrun.c (restore_current_uiout_cleanup): Move to ui-out.c.
(print_stop_event): Use make_cleanup_restore_current_uiout.
* python/python.c (execute_gdb_command): Likewise.
* ui-out.c (restore_current_uiout_cleanup): Move from infrun.c.
(make_cleanup_restore_current_uiout): New function definition.
* ui-out.h (make_cleanup_restore_current_uiout): New function
declaration.
* utils.c (do_restore_ui_out): Remove.
(make_cleanup_restore_ui_out): Remove.
* utils.h (make_cleanup_restore_ui_out): Remove.
2016-09-16 Pedro Alves <palves@redhat.com>
* defs.h (min, max): Delete.
* aarch64-tdep.c: Include <algorithm> and use std::min and
std::max throughout.
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64-windows-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* ctf.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* environ.c: Likewise.
* exec.c: Likewise.
* f-exp.y: Likewise.
* findcmd.c: Likewise.
* ft32-tdep.c: Likewise.
* gcore.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* linux-thread-db.c: Likewise.
* lm32-tdep.c: Likewise.
* m32r-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* memrange.c: Likewise.
* minidebug.c: Likewise.
* mips-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* nds32-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* parse.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* probe.c: Likewise.
* record-btrace.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-linux-tdep.c: Likewise.
* ser-tcp.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* source.c: Likewise.
* sparc-tdep.c: Likewise.
* symfile.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* xtensa-tdep.c: Likewise.
* cli/cli-cmds.c: Likewise.
* compile/compile-object-load.c: Likewise.
2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-linux-nat.c (PER_BIT, PER_EVENT_BRANCH, PER_EVENT_IFETCH)
(PER_EVENT_STORE, PER_EVENT_NULLIFICATION)
(PER_CONTROL_BRANCH_ADDRESS, PER_CONTROL_SUSPENSION)
(PER_CONTROL_ALTERATION): New macros.
(struct s390_debug_reg_state) <break_areas>: New member.
(s390_forget_process): Free break_areas as well.
(s390_linux_new_fork): Copy break_areas as well.
(s390_prepare_to_resume): Install hardware breakpoints.
(s390_can_use_hw_breakpoint): Indicate support for hardware
breakpoints.
(s390_insert_hw_breakpoint, s390_remove_hw_breakpoint): New
linux_nat target methods.
(_initialize_s390_nat): Register them.
2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
* nat/linux-nat.h (lwp_is_stepping): New declaration.
* linux-nat.c (lwp_is_stepping): New function.
2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-linux-nat.c (gdbcmd.h): New include.
(s390_show_debug_regs): New function.
(s390_stopped_by_watchpoint): Call it, if show_debug_regs is set.
(s390_prepare_to_resume): Likewise.
(_initialize_s390_nat): Register the command "maint set
show-debug-regs".
2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-linux-nat.c (watch_areas): Remove variable. Replace by a
member of...
(struct s390_debug_reg_state): ...this. New struct.
(struct s390_process_info): New struct.
(s390_process_list): New variable.
(s390_find_process_pid, s390_add_process, s390_process_info_get)
(s390_get_debug_reg_state): New functions.
(s390_stopped_by_watchpoint): Now access the watch_areas VEC via
s390_get_debug_reg_state.
(s390_prepare_to_resume): Likewise.
(s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
(s390_forget_process, s390_linux_new_fork): New linux_nat target
methods.
(_initialize_s390_nat): Register them.
2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-linux-nat.c (s390_watch_area): New typedef. Define a VEC.
(watch_base): Remove variable.
(watch_areas): New variable.
(s390_stopped_by_watchpoint): Transform operations on the
watch_base list to equivalent operations on the watch_areas VEC.
(s390_prepare_to_resume): Likewise.
(s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
2016-09-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-linux-nat.c (s390_prepare_to_resume): Use advertised lwp
functions instead of accessing lwp_info structure members.
(s390_mark_per_info_changed): New function.
(s390_new_thread): Use it.
(s390_refresh_per_info_cb): New function.
(s390_refresh_per_info): Remove parameter. Refresh all lwps of
the current process.
(s390_insert_watchpoint): Adjust call to s390_refresh_per_info.
(s390_remove_watchpoint): Likewise.
2016-09-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
* elfread.c (auxv.h): New include.
(elf_gnu_ifunc_resolve_addr): Pass HWCAP to ifunc resolver.
2016-09-08 Tom Tromey <tom@tromey.com>
* remote.c (remote_notif_stop_ack, remote_wait_as)
(show_remote_cmd): Remove unneeded casts.
2016-09-06 Pedro Alves <palves@redhat.com>
* top.c (wait_sync_command_done): Don't assume current_ui doesn't
change across events. Restore the current UI before returning.
(gdb_readline_wrapper): Restore the current UI before returning.
2016-09-06 Pedro Alves <palves@redhat.com>
* event-top.c (restore_ui_cleanup): Now static.
(make_cleanup_restore_current_ui): New function.
(switch_thru_all_uis_init): Use it.
* infcall.c (call_thread_fsm_should_stop): Use it.
* infrun.c (fetch_inferior_event): Use it.
* top.c (new_ui_command): Use it.
* top.h (restore_ui_cleanup): Delete declaration.
(make_cleanup_restore_current_ui): New declaration.
2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
* i386-tdep.c (i386_floatformat_for_type): New function.
(i386_gdbarch_init): Install it.
* ppc-linux-tdep.c (ppc_floatformat_for_type): New function.
(ppc_linux_init_abi): Install it.
2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (floatformat_for_type): New gdbarch callback.
* gdbarch.h, gdbarch.c: Re-generate.
* arch-utils.h (default_floatformat_for_type): New prototype.
* arch-utils.c (default_floatformat_for_type): New function.
* doublest.c (floatformat_from_length): Remove.
(floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL.
* gdbtypes.c (verify_floatformat): Require non-NULL format.
* dwarf2read.c (dwarf2_init_float_type): New function.
(read_base_type): Use it.
* stabsread.c (dbx_init_float_type): New function.
(read_sun_floating_type): Use it.
(read_range_type): Likewise.
2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
* ada-lang.c (ada_language_arch_info): Use gdbarch-provided
platform ABI floating-point formats for built-in types.
* d-lang.c (build_d_types): Likewise.
* f-lang.c (build_fortran_types): Likewise.
* m2-lang.c (build_m2_types): Likewise.
* mdebugread.c (basic_type): Likewise.
* go-lang.c (build_go_types): Use IEEE floating-point formats
for language built-in types as mandanted by the language.
* jv-lang.c (build_java_types): Likewise.
* rust-lang.c (rust_language_arch_info): Likewise.
* stabsread.c (rs6000_builtin_type): Likewise.
2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
* gdbtypes.c (init_type): Remove "char" special case.
(arch_integer_type): Likewise.
(gdbtypes_post_init): Set TYPE_NOSIGN for "char" type.
(objfile_type): Likewise.
* mdebugread.c (basic_type): Likewise.
* stabsread.c (rs6000_builtin_type): Likewise.
2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
* gdbtypes.h (enum type_flag_value): Remove.
Remove references to TYPE_FLAG_... in comments throughout.
* gdbtypes.c (recursive_dump_type): Do not print TYPE_FLAG_...
flags, print the corresponding TYPE_... access macro names.
Remove references to TYPE_FLAG_... in comments throughout.
* infcall.c: Remove references to TYPE_FLAG_... in comments.
* valprint.c: Likewise.
* gdb-gdb.py (class TypeFlag): No longer consider TYPE_FLAG_...
values, only TYPE_INSTANCE_FLAG_... values.
(class TypeFlagsPrinter): Likewise.
2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
* gdbtypes.h (init_type): Remove FLAGS argument. Move OBJFILE
argument to first position.
(init_integer_type): New prototype.
(init_character_type): Likewise.
(init_boolean_type): Likewise.
(init_float_type): Likewise.
(init_decfloat_type): Likewise.
(init_complex_type): Likewise.
(init_pointer_type): Likewise.
* gdbtypes.c (verify_floatflormat): New function.
(init_type): Remove FLAGS argument and processing. Move OBJFILE
argument to first position.
(init_integer_type): New function.
(init_character_type): Likewise.
(init_boolean_type): Likewise.
(init_float_type): Likewise.
(init_decfloat_type): Likewise.
(init_complex_type): Likewise.
(init_pointer_type): Likewise.
(arch_float_type): Use verify_floatflormat.
(objfile_type): Use init_..._type helpers instead of calling
init_type directly.
* dwarf2read.c (fixup_go_packaging): Update to changed init_type
prototype.
(read_namespace_type): Likewise.
(read_module_type): Likewise.
(read_typedef): Likewise.
(read_unspecified_type): Likewise.
(build_error_marker_type): Likewise.
(read_base_type): Use init_..._type helpers.
* mdebugread.c (basic_type): Use init_..._type helpers.
(parse_type): Update to changed init_type prototype.
(cross_ref): Likewise.
* stabsread.c (rs6000_builtin_type): Use init_..._type helpers.
(read_sun_builtin_type): Likewise.
(read_sun_floating_type): Likewise.
(read_range_type): Likewise. Also update to changed init_type
prototype.
2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
* gdbtypes.h (arch_decfloat_type): New prototype.
(arch_pointer_type): Likewise.
* gdbtypes.c (arch_decfloat_type): New function.
(arch_pointer_type): Likewise.
(gdbtypes_post_init): Use arch_decfloat_type.
* avr-tdep.c (avr_gdbarch_init): Use arch_pointer_type.
* ft32-tdep.c (ft32_gdbarch_init): Likewise.
* m32c-tdep.c (make_types): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
* gdbtypes.c (set_type_code): New function.
(init_type, arch_type): Use it.
2016-09-05 Ulrich Weigand <uweigand@de.ibm.com>
* ada-lang.c (ada_language_arch_info): Use gdbarch_long_double_bit
instead of gdbarch_double_bit for "long_long_float".
2016-09-05 Pedro Alves <palves@redhat.com>
* NEWS: Mention that a C++ compiler is now required.
* Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
(COMPILE.pre, CC_LD): Use CXX directly.
(INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
* acinclude.m4: Don't include build-with-cxx.m4.
* build-with-cxx.m4: Delete file.
* configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
* warning.m4: Assume $enable_build_with_cxx is yes.
* configure: Regenerate.
2016-09-05 Pedro Alves <palves@redhat.com>
PR backtrace/19927
* frame.c (get_frame_id): Compute the frame id if not computed
yet.
(unwind_to_current_frame): Delete.
(get_current_frame): Use get_prev_frame_always_1 to get the
current frame and assert that that always succeeds.
(get_prev_frame_if_no_cycle): Skip cycle detection if returning
the current frame.
2016-09-02 Tom Tromey <tom@tromey.com>
PR gdb/11616:
* dwarf2read.c (decode_locdesc): Handle DW_OP_form_tls_address.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Handle
DW_OP_form_tls_address.
(locexpr_describe_location_piece): Likewise.
* dwarf2expr.h (struct dwarf_expr_context_funcs): Update comment.
* dwarf2expr.c (execute_stack_op): Handle DW_OP_form_tls_address.
(ctx_no_get_tls_address): Mention DW_OP_form_tls_address.
* compile/compile-loc2c.c (struct insn_info): Update comment.
(compute_stack_depth_worker): Handle DW_OP_form_tls_address.
2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_wait): Mention that the function's prototype
can be found at target/target.h.
* target.h (target_wait): Move prototype from here...
* target/target.h (target_wait): ... to here.
2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* fork-child.c (startup_inferior): Replace calls to target_resume
by target_continue{,_no_signal}, depending on the case.
* linux-nat.c (cleanup_target_stop): Call
target_continue_no_signal instead of target_resume.
* procfs.c (procfs_wait): Likewise.
* target.c (target_continue): New function.
* target/target.h (target_continue): New prototype.
2016-08-31 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Fix typo.
2016-08-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* thread.c (tp_array_compar): Insert missing parentheses.
2016-08-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
* xtensa-tdep.h (XTENSA_GDBARCH_TDEP_INSTANTIATE): Replace
designated initializer list by plain initializer list, for C++
compliance.
2016-08-25 Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64-linux-nat.c (ps_get_thread_area): Remove const from
struct ps_prochandle.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* arm-linux-nat.c (ps_get_thread_area): Likewise.
* gdb_proc_service.h (ps_get_thread_area): Likewise.
* i386-linux-nat.c (ps_get_thread_area): Likewise.
* m68klinux-nat.c (ps_get_thread_area): Likewise.
* mips-linux-nat.c (ps_get_thread_area): Likewise.
* nat/aarch64-linux.c (aarch64_ps_get_thread_area): Likewise.
* nat/aarch64-linux.h (aarch64_ps_get_thread_area): Likewise.
* xtensa-linux-nat.c (ps_get_thread_area): Likewise.
2016-08-24 Simon Marchi <simon.marchi@ericsson.com>
* infcmd.c (set_inferior_io_terminal): Set inferior terminal to
NULL if terminal_name is an empty string.
(_initialize_infcmd): Make the argument of "set inferior-tty"
optional, mention it in the help doc.
2016-08-24 Carl Love <cel@us.ibm.com>
* rs6000-tdep.c (rs6000_gdbarch_init): Remove call
set_gdbarch_deprecated_fp_regnum() architecture
initialization function.
2016-08-23 Simon Marchi <simon.marchi@ericsson.com>
* stack.c (parse_frame_specification): Fix typo in comment.
2016-08-23 Pedro Alves <palves@redhat.com>
PR gdb/20494
* inflow.c (our_terminal_info, initial_gdb_ttystate): Update
comments.
(enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag):
Delete.
(set_initial_gdb_ttystate): Record our_terminal_info here too,
instead of ...
(gdb_has_a_terminal): ... here. Reimplement in terms of
initial_gdb_ttystate. Make static.
* terminal.h (gdb_has_a_terminal): Delete declaration.
(set_initial_gdb_ttystate): Add comment.
* top.c (show_interactive_mode): Use input_interactive_p instead
of gdb_has_a_terminal.
2016-08-22 Pedro Alves <palves@redhat.com>
PR gdb/20505
* linux-tdep.c (linux_vsyscall_range_raw): For core inferiors,
find the vDSO's start address with AT_SYSINFO_EHDR too, and
determine the vDSO's size by finding the PT_LOAD segment that
matches AT_SYSINFO_EHDR.
2016-08-19 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_analyze_prologue): Handle register
based STP instruction.
2016-08-19 Yao Qi <yao.qi@linaro.org>
* completer.c (linespec_location_completer): Make file_to_match
null-terminated.
2016-08-19 Pedro Alves <palves@redhat.com>
* amd64-tdep.c (amd64_relocate_instruction) <callq>: Handle return
addresses over 0x7fffffff.
2016-08-18 Carl Love <cel@us.ibm.com>
* MAINTANERS Write After Approval): Add "Carl Love".
2016-08-18 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op31): Handle HTM instructions.
2016-08-17 Simon Marchi <simon.marchi@ericsson.com>
* inferior.c (remove_inferior_command): Fix error message.
2016-08-17 Simon Marchi <simon.marchi@ericsson.com>
* inferior.c (exit_inferior_1): Remove comment.
2016-08-15 Matthew Wahab <matthew.wahab@arm.com>
PR gdb/20457
* gdb_proc_service.h: Add an include of gregset.h
[!HAVE_PROC_SERVICE_H]: Remove the include of gregset.h.
2016-08-15 Yao Qi <yao.qi@linaro.org>
* location.c (explicit_location_lex_one): Compare the return
value of strncmp with zero. Don't check (*inp)[9]. Increment
*inp by 8.
2016-08-11 Pedro Alves <palves@redhat.com>
PR gdb/20413
* nat/linux-ptrace.c: Include <sys/procfs.h> instead of
"gregset.h".
2016-08-10 Pedro Alves <palves@redhat.com>
PR gdb/19187
* record-full.c (record_full_remove_breakpoint): Don't remove the
breakpoint from the record_full_breakpoints VEC if we're detaching
the breakpoint from a fork child.
2016-08-10 Pedro Alves <palves@redhat.com>
PR gdb/19187
* break-catch-sig.c (signal_catchpoint_remove_location): Adjust
interface.
* break-catch-syscall.c (remove_catch_syscall):
* breakpoint.c (enum remove_bp_reason): Moved to breakpoint.h.
(remove_breakpoint_1): Pass 'reason' down.
(remove_catch_fork, remove_catch_vfork, remove_catch_solib)
(remove_catch_exec, remove_watchpoint, remove_masked_watchpoint)
(base_breakpoint_remove_location, bkpt_remove_location)
(bkpt_probe_remove_location, bkpt_probe_remove_location): Adjust
interface.
* breakpoint.h (enum remove_bp_reason): Moved here from
breakpoint.c.
(struct breakpoint_ops) <remove_location>: Add 'reason' parameter.
* corelow.c (core_remove_breakpoint): New function.
(init_core_ops): Install it as to_remove_breakpoint method.
* exec.c (exec_remove_breakpoint): New function.
(init_exec_ops): Install it as to_remove_breakpoint method.
* mem-break.c (memory_remove_breakpoint): Adjust interface.
* record-btrace.c (record_btrace_remove_breakpoint): Adjust
interface.
* record-full.c (record_full_remove_breakpoint)
(record_full_core_remove_breakpoint): Adjust interface.
* remote.c (remote_remove_breakpoint): Adjust interface.
* target-debug.h (target_debug_print_enum_remove_bp_reason): New
macro.
* target-delegates.c: Regenerate.
* target.c (target_remove_breakpoint): Add 'reason' parameter.
* target.h (struct target_ops) <to_remove_breakpoint>: Add
'reason' parameter.
(target_remove_breakpoint, memory_remove_breakpoint): Add 'reason'
parameter.
2016-08-10 Pedro Alves <palves@redhat.com>
PR gdb/19187
* breakpoint.c (insertion_state_t): Delete.
(enum remove_bp_reason): New.
(detach_breakpoints, remove_breakpoint_1, remove_breakpoint):
Adjust to use enum remove_bp_reason instead of insertion_state_t.
2016-08-10 Pedro Alves <palves@redhat.com>
PR gdb/19187
* breakpoint.c (remove_breakpoint): Remove 'is' parameter and
always pass mark_uninserted to remove_breakpoint_1.
(insert_breakpoint_locations, remove_breakpoints)
(remove_breakpoints_pid, update_global_location_list): Update
callers.
2016-08-10 Руслан Ижбулатов <lrn1986@gmail.com>
Pedro Alves <palves@redhat.com>
* windows-nat.c (MS_VC_EXCEPTION): New define.
(handle_exception_result): New enum.
(windows_delete_thread): Free the thread's name.
(handle_exception): Handle MS_VC_EXCEPTION.
(get_windows_debug_event): Handle HANDLE_EXCEPTION_IGNORED.
(windows_thread_name): New function.
(windows_target): Install it as to_thread_name method.
* NEWS: Mention the thread naming support on MS-Windows.
2016-08-10 Pedro Alves <palves@redhat.com>
* common/signals-state-save-restore.c
(save_original_signals_state, restore_original_signals_state):
Wrap perror_with_name arguments with '()'.
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/20418
* event-top.c (ui_register_input_event_handler)
(ui_unregister_input_event_handler): New functions.
(async_enable_stdin): Register input in the event loop.
(async_disable_stdin): Unregister input from the event loop.
(gdb_setup_readline): Register input in the event loop.
* infrun.c (check_curr_ui_sync_execution_done): Register input in
the event loop.
* target.c (target_terminal_inferior): Don't unregister input from
the event loop.
(target_terminal_ours): Don't register input in the event loop.
* target.h (target_terminal_inferior)
(target_terminal_ours_for_output, target_terminal_ours): Update
comments.
* top.h (ui_register_input_event_handler)
(ui_unregister_input_event_handler): New declarations.
* utils.c (ui_unregister_input_event_handler_cleanup)
(prepare_to_handle_input): New functions.
(defaulted_query, prompt_for_continue): Use
prepare_to_handle_input.
2016-08-09 Pedro Alves <palves@redhat.com>
PR mi/20431
* mi/mi-main.c (mi_execute_command): Enable input and set prompt
state to PROMPT_NEEDED.
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (SFILES): Add
common/signals-state-save-restore.c.
(HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
(COMMON_OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* configure: Regenerate.
* fork-child.c: Include "signals-state-save-restore.h".
(fork_inferior): Call restore_original_signals_state.
* main.c: Include "signals-state-save-restore.h".
(captured_main): Call save_original_signals_state.
* common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
* common/signals-state-save-restore.c: New file.
* common/signals-state-save-restore.h: New file.
2016-08-09 Pedro Alves <palves@redhat.com>
* value.c (unpack_value_bitfield): Skip unpacking if the parent
has no contents buffer to begin with.
2016-08-08 Pedro Alves <palves@redhat.com>
* features/i386/amd64-avx-mpx-linux.c: Regenerate.
* features/i386/amd64-avx-mpx.c: Regenerate.
* features/i386/i386-avx-mpx-linux.c: Regenerate.
* features/i386/i386-avx-mpx.c: Regenerate.
2016-08-05 Simon Marchi <simon.marchi@ericsson.com>
* event-top.h (cli_command_loop): Remove.
2016-08-05 Pedro Alves <palves@redhat.com>
PR remote/20398
* remote-fileio.c (remote_fileio_quit_handler): Check the quit
flag before calling quit.
2016-08-05 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB and GDBserver build with a C++ compiler
by default.
2016-08-05 Pedro Alves <palves@redhat.com>
* build-with-cxx.m4: Change help string to be in terms of
--disable-build-with-cxx.
* configure: Regenerate.
2016-08-04 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (tdesc_arm_with_vfpv3): Remove the
declaration.
(aarch64_linux_read_description): Remove code on getting
auxv and select target description on it. Select target
description by the result of NT_ARM_VFP ptrace request.
2016-08-03 Tom Tromey <tom@tromey.com>
PR python/18565:
* python/py-frame.c (frapy_function): Use find_frame_funname.
2016-08-03 Tom Tromey <tom@tromey.com>
* stack.c (find_frame_funname): Avoid any possible leak in case
cp_remove_params can throw.
2016-08-03 Tom Tromey <tom@tromey.com>
* NEWS: Mention new Python breakpoint events.
2016-08-02 Tom Tromey <tom@tromey.com>
* MAINTAINERS (Core): Add self as Rust maintainer.
2016-08-01 Joel Brobecker <brobecker@adacore.com>
* NEWS: Create a new section for the next release branch.
Rename the section of the current branch, now that it has
been cut.
2016-08-01 Joel Brobecker <brobecker@adacore.com>
GDB 7.12 branch created (41bfcd638a4e0e48b96ce4de2845372dea481322):
* version.in: Bump version to 7.12.50.DATE-git.
2016-07-27 Alan Modra <amodra@gmail.com>
* amd64-darwin-tdep.c: Don't include libbfd.h.
* i386-darwin-tdep.c: Likewise.
* rs6000-nat.c: Likewise.
* rs6000-tdep.c: Likewise.
2016-07-26 Tom Tromey <tom@tromey.com>
* symtab.c (register_symbol_computed_impl): Update.
PR python/20190:
* value.h (symbol_read_needs): Declare.
(symbol_read_needs_frame): Add comment.
* symtab.h (struct symbol_computed_ops) <read_variable>: Update
comment.
<get_symbol_read_needs>: Rename. Change return type.
* findvar.c (symbol_read_needs): New function.
(symbol_read_needs_frame): Rewrite.
(default_read_var_value): Use symbol_read_needs.
* dwarf2loc.c (struct symbol_needs_baton): Rename.
<needs>: Renamed from needs_frame. Changed type.
(needs_frame_read_addr_from_reg, symbol_needs_get_reg_value)
(symbol_needs_read_mem, symbol_needs_frame_base)
(symbol_needs_frame_cfa, symbol_needs_tls_address)
(symbol_needs_dwarf_call): Rename.
(needs_dwarf_reg_entry_value): Update.
(symbol_needs_ctx_funcs, dwarf2_loc_desc_get_symbol_read_needs):
Rename and update.
(locexpr_get_symbol_read_needs, loclist_symbol_needs): Likewise.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum symbol_needs_kind): New.
2016-07-26 Pedro Alves <palves@redhat.com>
* nat/linux-ptrace.c: Include "gregset.h".
(linux_ptrace_test_ret_to_nx): Use PTRACE_GETREGS instead of
PTRACE_PEEKUSER.
2016-07-26 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
parameter to 'ptrace'.
* nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
(nat_uptr_t): New an unsigned long.
(nat_clock_t): Remove attribute __aligned__.
(struct nat_timeval): Delete.
(nat_siginfo_t): Remove attribute __aligned__.
(ptrace_siginfo_t): Define.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(compat_x32_siginfo_from_siginfo)
(siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
Remove casts.
(amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
'ptrace'. Remove static assertions.
(top level): New static assertions.
2016-07-25 Simon Marchi <simon.marchi@ericsson.com>
* top.h (make_delete_ui_cleanup): New declaration.
* top.c (delete_ui_cleanup): New function.
(make_delete_ui_cleanup): New function.
(new_ui_command): Create restore_ui cleanup earlier, create a
delete_ui cleanup and discard it on success.
2016-07-25 Pedro Alves <palves@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* nat/linux-procfs.c (parse_proc_status_state): Handle lowercase
't'.
2016-07-25 Pedro Alves <palves@redhat.com>
* nat/linux-procfs.c (enum proc_state): New enum.
(parse_proc_status_state): New function.
(linux_proc_pid_get_state): Replace output string buffer parameter
with an output proc_state parameter. Use parse_proc_status_state.
(linux_proc_pid_is_gone): Adjust to use proc_state values.
(linux_proc_pid_has_state): Change type of 'state' parameter; now
an enum proc_state. Adjust to linux_proc_pid_get_state interface
change.
(linux_proc_pid_is_stopped)
(linux_proc_pid_is_trace_stopped_nowarn)
(linux_proc_pid_is_zombie_maybe_warn): Adjust to
linux_proc_pid_get_state interface change.
2016-07-25 Tim Wiederhake <tim.wiederhake@intel.com>
* MAINTAINERS (Write After Approval): Add Tim Wiederhake
2016-07-25 Tim Wiederhake <tim.wiederhake@intel.com>
* NEWS: Resume btrace on reconnect.
* record-btrace.c: Added record-btrace.h include.
(record_btrace_open): Split into this and ...
(record_btrace_push_target): ... this.
(record_btrace_disconnect): New function.
(init_record_btrace_ops): Use record_btrace_disconnect.
* record-btrace.h: New file.
* remote.c: Added record-btrace.h include.
(remote_start_remote): Check recording status.
(remote_btrace_maybe_reopen): New function.
2016-07-23 Gabriel Krisman Bertazi <gabriel@krisman.be>
* xml-syscall.c (get_syscalls_by_group): New.
(get_syscall_group_names): New.
(struct syscall_group_desc): New structure to store group data.
(struct syscalls_info): Include field to store the group list.
(sysinfo_free_syscall_group_desc): New.
(free_syscalls_info): Free group list.
(syscall_group_create_syscall_group_desc): New.
(syscall_group_add_syscall): New.
(syscall_create_syscall_desc): Add syscall to its groups.
(syscall_start_syscall): Load group attribute.
(syscall_group_get_group_by_name): New.
(xml_list_syscalls_by_group): New.
(xml_list_of_groups): New.
* xml-syscall.h (get_syscalls_by_group): Export function
to retrieve a list of syscalls filtered by the group name.
(get_syscall_group_names): Export function to retrieve the list
of syscall groups.
* break-catch-syscall.c (catch_syscall_split_args): Verify if
argument is a syscall group and expand it to a list of syscalls
when creating catchpoints.
(catch_syscall_completer): Add word completion for system call
groups.
* configure.ac: Include dependency for xsltproc when building
in maintainer-mode.
* break-catch-syscall.c (_initialize_breakpoint): Update catch
syscall command documentation.
* NEWS: Include section about catching groups of syscalls.
* configure: Regenerate.
* data-directory/Makefile.in: Generate syscall xml when building
in maintainer mode.
* syscalls/gdb-syscalls.dtd: Include group attribute to the
syscall element.
* syscalls/apply-defaults.xsl: New.
* syscalls/linux-defaults.xml.in: New.
* syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
* syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
* syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
* syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
* syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
* syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
* syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
* syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
* syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
* syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
* syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
* syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
* syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
* syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
* syscalls/aarch64-linux.xml: Regenerate.
* syscalls/amd64-linux.xml: Regenerate.
* syscalls/arm-linux.xml: Regenerate.
* syscalls/i386-linux.xml: Regenerate.
* syscalls/mips-n32-linux.xml: Regenerate.
* syscalls/mips-n64-linux.xml: Regenerate.
* syscalls/mips-o32-linux.xml: Regenerate.
* syscalls/ppc-linux.xml: Regenerate.
* syscalls/ppc64-linux.xml: Regenerate.
* syscalls/s390-linux.xml: Regenerate.
* syscalls/s390x-linux.xml: Regenerate.
* syscalls/sparc-linux.xml: Regenerate.
* syscalls/sparc64-linux.xml: Regenerate.
2016-07-23 Andrew Pinski <apinski@cavium.com>
* nat/aarch64-linux-hw-point.c
(aarch64_linux_get_debug_reg_capacity): Handle
ARMv8.1 and ARMv8.2 debug versions.
* nat/aarch64-linux-hw-point.h
(AARCH64_DEBUG_ARCH_V8_1): New define.
(AARCH64_DEBUG_ARCH_V8_2): New define.
2016-06-30 Руслан Ижбулатов <lrn1986@gmail.com>
PR gdb/14529
* windows-nat.c (signal_event_command): New command 'signal-event'
for W32 JIT debug support.
* NEWS: Add an entry about the new 'signal-event' command.
2016-07-22 Tom Tromey <tom@tromey.com>
PR rust/20162:
* dwarf2read.c (scan_partial_symbols) <DW_TAG_structure_type>:
Call scan_partial_symbols for children when reading a Rust CU.
(dwarf2_physname): Ignore invalid DW_AT_linkage_name generated by
rustc.
(process_structure_scope) <DW_TAG_subprogram>: Call
read_func_scope for Rust.
2016-07-22 Yao Qi <yao.qi@linaro.org>
* ctf.c (ctf_traceframe_info): Call bt_ctf_get_uint64 rather than
bt_ctf_get_int64.
2016-07-21 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_tuple_struct_type_p): Return false for empty
structs.
* rust-exp.y (struct_expr_list): Allow empty elements.
2016-07-21 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS) <build_warnings>: Add
-Wunused-but-set-parameter, -Wunused-but-set-variable.
2016-07-21 Pedro Alves <palves@redhat.com>
* go32-nat.c (go32_create_inferior): Add cast.
* ser-go32.c (dos_noop): Delete.
(dos_flush_output, dos_setparity, dos_drain_output): New
functions.
(dos_write): Add cast.
(dos_ops): Use dos_flush_output, dos_setparity and
dos_drain_output.
* top.c (do_chdir_cleanup): Add cast.
2016-07-21 Pedro Alves <palves@redhat.com>
* windows-nat.c (handle_exception): Remove "th".
2016-07-21 Pedro Alves <palves@redhat.com>
* varobj.c (varobj_value_get_print_value): Move "gdbarch" to block
scope that uses it.
2016-07-20 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c (fbsd_enable_proc_events): Enable "PTRACE_VFORK"
events.
(fbsd_pending_vfork_done): Only define if "PTRACE_VFORK" is not
defined.
(fbsd_add_vfork_done): Likewise.
(fbsd_is_vfork_done_pending): Likewise.
(fbsd_next_vfork_done): Likewise.
(fbsd_resume): Only ignore pending vfork done events if
"PTRACE_VFORK" is not defined.
(fbsd_wait): Only look for pending vfork done events if
"PTRACE_VFORK" is not defined.
[PTRACE_VFORK]: Handle "PL_FLAG_VFORKED" and "PL_FLAG_VFORK_DONE"
events.
(fbsd_follow_fork): Only fake a vfork done event if "PTRACE_VFORK"
is not defined.
2016-07-20 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c (fbsd_wait): Use "fbsd_enable_proc_events" on
new child processes.
2016-07-20 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c (fbsd_enable_lwp_events): Remove function.
(fbsd_enable_proc_events): New function.
(fbsd_enable_follow_fork): Remove function.
(fbsd_post_startup_inferior): Use "fbsd_enable_proc_events".
(fbsd_post_attach): Likewise.
2016-07-15 John Baldwin <jhb@FreeBSD.org>
* common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
(do_gdb_signal_to_host): Likewise.
* infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
programs.
* proc-events.c (signal_table): Add entry for SIGLIBRT.
2016-07-14 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_deleted): Add missing
newline.
2016-07-14 Tom Tromey <tom@tromey.com>
* mips-tdep.c (micromips_scan_prologue): Remove "frame_addr".
(mips_o32_push_dummy_call): Remove "stack_used_p".
* aarch64-tdep.c (aarch64_record_data_proc_imm): Remove
"insn_bit28".
* rust-lang.c (rust_print_type): Remove "len".
* rust-exp.y (super_name): Remove "current_len".
* python/py-framefilter.c (py_print_type): Remove "type".
* mdebugread.c (parse_partial_symbols): Remove
"past_first_source_file".
<N_SO>: Remove "valu", "first_so_symnum", "prev_textlow_not_set".
* m2-valprint.c (m2_print_unbounded_array): Remove
"content_type".
(m2_val_print): Remove "i".
* linespec.c (unexpected_linespec_error): Remove "cleanup".
* f-valprint.c (f_val_print): Remove "i".
* elfread.c (elf_symtab_read): Remove "offset".
* dwarf2-frame.c (dwarf2_fetch_cfa_info): Remove "addr_size".
* jit.c (jit_dealloc_cache): Remove "i" and "frame_arch".
2016-07-14 Tom Tromey <tom@tromey.com>
* arch-utils.c (default_skip_permanent_breakpoint): Remove
"bp_insn".
* disasm.c (do_assembly_only): Remove "num_displayed".
* dwarf2read.c (read_abbrev_offset): Remove "length".
(dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove
"constant".
* m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl".
* microblaze-tdep.c (microblaze_frame_cache): Remove "func".
* tracefile.c (trace_save): Remove "status".
2016-07-14 Tom Tromey <tom@tromey.com>
* symfile.c (simple_overlay_update_1): Remove initialization
of "size", and commented-out code.
(simple_overlay_update): Likewise.
2016-07-14 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_show_source_line): Use getcurx.
* tui/tui-io.c (tui_puts): Use getcurx.
(tui_redisplay_readline): Likewise.
2016-07-14 Tom Tromey <tom@tromey.com>
* inflow.c (child_terminal_ours_1): Use ATTRIBUTE_UNUSED.
2016-07-14 Tom Tromey <tom@tromey.com>
* corefile.c (reopen_exec_file): Only examine st.st_mtime if stat
succeeded.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python/py-evts.c (gdbpy_initialize_py_events): Call
add_new_registry for new events.
* python/py-events.h (events_object) <breakpoint_created,
breakpoint_deleted, breakpoint_modified>: New fields.
* python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
breakpoint changed event.
(gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
(gdbpy_breakpoint_modified): New function.
(gdbpy_initialize_breakpoints): Attach to the breakpoint modified
observer.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* NEWS: Update.
* python/py-breakpoint.c (bppy_get_pending): New function.
(breakpoint_object_getset): Add entry for "pending".
* breakpoint.h (pending_breakpoint_p): Declare.
* breakpoint.c (pending_breakpoint_p): New function.
2016-07-13 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (bppy_get_visibility)
(gdbpy_breakpoint_created): Use user_breakpoint_p.
2016-07-13 Tom Tromey <tom@tromey.com>
PR cli/18053:
* jit.c (jit_reader_load_command): Use tilde_expand.
(_initialize_jit): Fix help for jit-reader-unload. Set completer
for new commands.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* python/lib/gdb/command/unwinders.py (do_enable_unwinder): Call
gdb.invalidate_cached_frames.
* python/lib/gdb/unwinder.py (register_unwinder): Call
gdb.invalidate_cached_frames.
* python/python.c (gdbpy_invalidate_cached_frames): New function.
(python_GdbMethods): Add entry for invalidate_cached_frames.
2016-07-07 Walfred Tedeschi <walfred.tedeschi@intel.com>
* cp-namespace.c (cp_lookup_bare_symbol): Initialize
lang_this.symbol.
2016-07-07 Walfred Tedeschi <walfred.tedeschi@intel.com>
* cp-namespace.c (cp_lookup_bare_symbol): Use language passed as
parameter to look for the symbol "this".
2016-07-06 John Baldwin <jhb@FreeBSD.org>
* h8300-tdep.c (h8300_print_register): Remove extraneous parentheses.
2016-07-06 John Baldwin <jhb@FreeBSD.org>
* ada-lang.c (ada_unpack_from_contents): Use unsigned constants with
left shifts.
2016-07-06 John Baldwin <jhb@FreeBSD.org>
* sh64-tdep.c (sh64_analyze_prologue): Set "uses_fp" when setting
the MEDIA_FP_REGNUM register.
2016-07-06 John Baldwin <jhb@FreeBSD.org>
* score-tdep.c (score7_malloc_and_get_memblock): Remove check for
negative size.
2016-07-06 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c (fbsd_is_vfork_done_pending): Fix return type.
2016-07-06 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_vfp_cprc_sub_candidate): Don't call
arm_vfp_cprc_sub_candidate for static field.
2016-07-06 Manish Goregaokar <manish@mozilla.com>
* rust-lang.c (rust_subscript): Allow subscripting pointers.
2016-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
* configure: Regenerate.
* configure.ac (HAVE_LIBBABELTRACE): Fix pos variable dereference.
2016-07-01 Don Breazeal <donb@codesourcery.com>
* remote.c (remote_get_memory_xfer_limit): New function.
* target-delegates.c: Regenerate.
* target.c (memory_xfer_partial): Call
target_ops.to_get_memory_xfer_limit.
* target.h (struct target_ops) <to_get_memory_xfer_limit>: New
member.
2016-07-01 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c (struct fbsd_fork_child_info): Rename to ...
(struct fbsd_fork_info): ... this.
(struct fbsd_fork_info) <child>: Rename to ...
(struct fbsd_fork_info) <ptid>: ... this.
(fbsd_pending_children): Update type.
(fbsd_remember_child): Update type and field name.
(fbsd_is_child_pending): Likewise.
(fbsd_pending_vfork_done): New variable.
(fbsd_is_vfork_done_pending): New function.
(fbsd_next_vfork_done): New function.
(fbsd_resume): Don't resume processes with a pending vfork done
event.
(fbsd_wait): Report pending vfork done events.
(fbsd_follow_fork): Delay and record a pending vfork done event
for a vfork parent when detaching the child.
2016-07-01 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c (super_resume): Move earlier next to "super_wait".
(resume_one_thread_cb): Move below fork following helper code.
(resume_all_threads_cb): Likewise.
(fbsd_resume): Likewise.
2016-07-01 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c (fbsd_follow_fork): Only detach child if
"detach_fork" is true.
2016-07-01 John Baldwin <jhb@FreeBSD.org>
* x86bsd-nat.c: Include 'gdbthread.h'.
(x86bsd_dr_set): Set debug registers on all threads belonging to
the current inferior.
2016-07-01 John Baldwin <jhb@FreeBSD.org>
* Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with
'x86bsd-nat.h'.
* amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of
'amd64bsd-nat.h'.
(amd64bsd_xsave_len): Rename and move to x86bsd-nat.c.
(amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len'
with 'x86bsd_xsave_len'.
(amd64bsd_store_inferior_registers): Likewise.
(amd64bsd_target): Inherit from x86bsd_target.
(amd64bsd_dr_get): Rename and move to x86bsd-nat.c.
(amd64bsd_dr_set): Likewise.
(amd64bsd_dr_set_control): Likewise.
(amd64bsd_dr_set_addr): Likewise.
(amd64bsd_dr_get_addr): Likewise.
(amd64bsd_dr_get_status): Likewise.
(amd64bsd_dr_get_control): Likewise.
* amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of
'amd64bsd-nat.h'.
(super_mourn_inferior): Move to x86bsd-nat.c.
(amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c.
(amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with
'x86bsd_xsave_len'.
(_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and
mourn_inferior' target op.
* config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o.
* config/i386/fbsd64.mh: Likewise.
* config/i386/nbsd64.mh: Likewise.
* config/i386/nbsdelf.mh: Likewise.
* config/i386/obsd.mh: Likewise.
* config/i386/obsd64.mh: Likewise.
* i386bsd-nat.c: Include 'x86bsd-nat.h'.
(i386bsd_xsave_len): Rename and move to x86bsd-nat.c.
(i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len'
with 'x86bsd_xsave_len'.
(i386bsd_store_inferior_registers): Likewise.
(i386bsd_target): Inherit from x86bsd_target.
(i386bsd_dr_get): Rename and move to x86bsd-nat.c.
(i386bsd_dr_set): Likewise.
(i386bsd_dr_set_control): Likewise.
(i386bsd_dr_set_addr): Likewise.
(i386bsd_dr_get_addr): Likewise.
(i386bsd_dr_get_status): Likewise.
(i386bsd_dr_get_control): Likewise.
* i386bsd-nat.h (i386bsd_xsave_len): Remove.
(i386bsd_dr_set_control): Remove.
(i386bsd_dr_set_addr): Remove.
(i386bsd_dr_get_addr): Remove.
(i386bsd_dr_get_status): Remove.
(i386bsd_dr_get_control): Remove.
* i386fbsd-nat.c: Include 'x86bsd-nat.h'.
(i386fbsd_read_description): Replace 'i386bsd_xsave_len' with
'x86bsd_xsave_len'.
(_initialize_i386fbsd_nat): Remove x86 watchpoint setup and
mourn_inferior' target op.
* x86bsd-nat.c: New file.
* x86bsd-nat.h: New file.
2016-07-01 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* jit.c (jit_reader_load_command): Call reinit_frame_cache and
jit_inferior_created_hook.
(jit_reader_unload_command): Call reinit_frame_cache and
jit_inferior_exit_hook.
* jit.c (struct jit_unwind_private) <registers>: Delete field.
<regcache>: New field.
(jit_unwind_reg_set_impl): Set the register's value in the
regcache. Free the passed-in gdb_reg_value.
(jit_dealloc_cache): Adjust to free the regcache.
(jit_frame_sniffer): Allocate a regcache instead of an array of
gdb_reg_value pointers.
(jit_frame_this_id): Adjust.
(jit_frame_prev_register): Read raw registers off of the regcache
instead of from the gdb_reg_value pointer array. Use
gdbarch_pseudo_register_read_value to read pseudo registers.
* regcache.c (regcache_raw_set_cached_value): New function,
factored out from ...
(regcache_raw_write): ... here.
* regcache.h (regcache_raw_set_cached_value): Declare.
2016-07-01 Pedro Alves <palves@redhat.com>
Antoine Tremblay <antoine.tremblay@ericsson.com>
* inf-ptrace.c (inf_ptrace_detach_success): New function, factored
out from ...
(inf_ptrace_detach): ... here.
* inf-ptrace.h (inf_ptrace_detach_success): New declaration.
* linux-nat.c (get_pending_status): Rename to ...
(get_detach_signal): ... this, and return a host signal instead of
filling in a wait status.
(detach_one_lwp): New function, factored out from detach_callback
and adjusted to handle detaching from a zombie thread.
(detach_callback): Skip the leader thread.
(linux_nat_detach): No longer defer to inf_ptrace_detach to detach
the leader thread, nor build a signal string to pass down.
Instead, use target_announce_detach, detach_one_lwp and
inf_ptrace_detach_success.
2016-07-01 Pedro Alves <palves@redhat.com>
* breakpoint.c (breakpoint_init_inferior): Discard watchpoint
locations.
* infcmd.c (detach_command): Call breakpoint_init_inferior.
2016-07-01 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_detach): Use target_announce_detach.
* inf-ptrace.c (inf_ptrace_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
* target.c (target_announce_detach): New function.
* target.h (target_announce_detach): New declaration.
2016-06-29 Tom Tromey <tom@tromey.com>
PR python/20129:
* python/lib/gdb/command/frame_filters.py (_do_enable_frame_filter)
(SetFrameFilterPriority._set_filter_priority): Use "frame_filter",
not "name".
2016-06-29 Tom Tromey <tom@tromey.com>
PR gdb/17210:
* target.c (free_memory_read_result_vector): Take a pointer to the
VEC as an argument.
(read_memory_robust): Install a cleanup for "result".
* mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.
2016-06-29 Manish Goregaokar <manish@mozilla.com>
* rust-lang.c (rust_get_disr_info): Initialize saveptr to NULL.
2016-06-29 Manish Goregaokar <manish@mozilla.com>
* rust-lang.c (rust_get_disr_info): Use strtok_r instead of strsep.
2016-06-28 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
variable new_offset.
2016-06-27 Manish Goregaokar <manish@mozilla.com>
* rust-lang.c (rust_print_type, rust_decorations): Print unit
types as "()".
(rust_print_type): Omit return type for functions returning unit.
2016-06-25 Pierre-Marie de Rodat <derodat@adacore.com>
* python/py-breakpoint.c (bppy_init): Clear bppy_pending_object
when there is an error during the breakpoint creation.
2016-06-25 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_get_disr_info, rust_print_type): Fix
formatting.
2016-06-25 Manish Goregaokar <manish@mozilla.com>
PR gdb/20239
* rust-lang.c (rust_get_disr_info): Correctly interpret
NonZero-optimized enums of arbitrary depth.
(rust_print_type): Correctly print NonZero-optimized
enums.
2016-06-24 David Taylor <dtaylor@emc.com>
PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
* c-lang.h: Change all parameters, variables, and struct or union
members used as struct or union fie3ld offsets from int to
LONGEST.
* c-valprint.c: Likewise.
* cp-abi.c: Likewise.
* cp-abi.h: Likewise.
* cp-valprint.c: Likewise.
* d-valprint.c: Likewise.
* dwarf2loc.c: Likewise.
* eval.c: Likewise.
* extension-priv.h: Likewise.
* extension.c: Likewise.
* extension.h: Likewise.
* findvar.c: Likewise.
* gdbtypes.h: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-valprint.c: Likewise.
* guile/guile-internal.h: Likewise.
* guile/scm-pretty-print.c: Likewise.
* jv-valprint.c Likewise.
* opencl-lang.c: Likewise.
* p-lang.h: Likewise.
* python/py-prettyprint.c: Likewise.
* python/python-internal.h: Likewise.
* spu-tdep.c: Likewise.
* typeprint.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* valprint.h: Likewise.
* value.c: Likewise.
* value.h: Likewise.
* p-valprint.c: Likewise.
* c-typeprint.c (c_type_print_base): When printing offset, use
plongest, not %d.
* gdbtypes.c (recursive_dump_type): Ditto.
2016-06-24 David Taylor <david.taylor@emc.com>
* MAINTAINERS (Write After Approval): Add David Taylor.
2016-06-24 John Baldwin <jhb@FreeBSD.org>
* configure.ac: Check for support for system call LWP fields on
FreeBSD.
* config.in, configure: Rebuild.
* data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
* fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Report system call events.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
(fbsd_set_syscall_catchpoint): New function.
(fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
* fbsd-tdep.c: Include xml-syscall.h
(fbsd_get_syscall_number): New function.
(fbsd_init_abi): Set XML system call file name.
Add "get_syscall_number" gdbarch method.
* syscalls/freebsd.xml: New file.
2016-06-24 John Baldwin <jhb@FreeBSD.org>
* fbsd-tdep.c: Include "auxv.h".
(fbsd_print_auxv_entry): New function.
(fbsd_init_abi): Install gdbarch "print_auxv_entry" method.
2016-06-24 John Baldwin <jhb@FreeBSD.org>
* auxv.c (fprint_auxv_entry): New function.
(default_print_auxv_entry): New function.
(fprint_target_auxv): Use gdbarch_print_auxv_entry.
* auxv.h (enum auxv_format): New enum.
(fprint_auxv_entry): Declare.
(default_print_auxv_entry): Declare.
* gdbarch.sh (print_auxv_entry): New.
* gdbarch.c, gdbarch.h: Re-generated.
2016-06-24 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c [KERN_PROC_AUXV] New variable super_xfer_partial.
(fbsd_xfer_partial): New function.
(fbsd_nat_add_target) [KERN_PROC_AUXV] Set "to_xfer_partial" to
"fbsd_xfer_partial".
2016-06-23 Tom Tromey <tom@tromey.com>
* symtab.c (symbol_find_demangled_name): Loop over languages and
use language_sniff_from_mangled_name.
* rust-lang.c (rust_sniff_from_mangled_name): New function.
(rust_language_defn): Update.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_sniff_from_mangled_name): New function.
(objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_sniff_from_mangled_name>: New
field.
(language_sniff_from_mangled_name): Declare.
* language.c (language_sniff_from_mangled_name): New function.
(unknown_language_defn, auto_language_defn, local_language_defn):
Update.
* jv-lang.c (java_sniff_from_mangled_name): New function.
(java_language_defn): Use it.
* go-lang.c (go_sniff_from_mangled_name): New function.
(go_language_defn): Use it.
* f-lang.c (f_language_defn): Update.
* defs.h (enum language): Reorder.
* d-lang.c (d_sniff_from_mangled_name): New function.
(d_language_defn): Use it.
* cp-support.h (gdb_sniff_from_mangled_name): Declare.
* cp-support.c (gdb_sniff_from_mangled_name): New function.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_sniff_from_mangled_name): New function.
(ada_language_defn): Use it.
2016-06-23 Tom Tromey <tom@tromey.com>
* ada-lang.c (ada_extensions): New array.
(ada_language_defn): Use it.
* c-lang.c (c_extensions): New array.
(c_language_defn): Use it.
(cplus_extensions): New array.
(cplus_language_defn): Use it.
(asm_extensions): New array.
(asm_language_defn): Use it.
(minimal_language_defn): Update.
* d-lang.c (d_extensions): New array.
(d_language_defn): Use it.
* f-lang.c (f_extensions): New array.
(f_language_defn): Use it.
* go-lang.c (go_language_defn): Update.
* jv-lang.c (java_extensions): New array.
(java_language_defn): Use it.
* language.c (add_language): Call add_filename_language.
(unknown_language_defn, auto_language_defn, local_language_defn):
Update.
* language.h (struct language_defn) <la_filename_extensions>: New
field.
* m2-lang.c (m2_language_defn): Update.
* objc-lang.c (objc_extensions): New array.
(objc_language_defn): Use it.
* opencl-lang.c (opencl_language_defn): Update.
* p-lang.c (p_extensions): New array.
(pascal_language_defn): Use it.
* rust-lang.c (rust_extensions): New array.
(rust_language_defn): Use it.
* symfile.c (add_filename_language): No longer static. Make "ext"
const.
(init_filename_language_table): Remove.
(_initialize_symfile): Update.
* symfile.h (add_filename_language): Declare.
2016-06-23 Tom Tromey <tom@tromey.com>
* symfile.c (filename_language_table): Now a VEC.
(fl_table_size, fl_table_next): Remove.
(add_filename_language): Use VEC_safe_push.
(set_ext_lang_command, info_ext_lang_command)
(deduce_language_from_filename): Use VEC_iterate.
(init_filename_language_table): Use VEC_empty.
2016-06-23 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_parameter): Now static.
* python/python-internal.h (gdbpy_parameter): Don't declare.
2016-06-23 Tom Tromey <tom@tromey.com>
PR gdb/16483:
* python/lib/gdb/command/frame_filters.py
(InfoFrameFilter.list_frame_filters): Rename to print_list. Print
nothing if no filters found. Return value indicating whether
filters were printed.
(InfoFrameFilter.print_list): Remove.
(InfoFrameFilter.invoke): Print message if no frame filters
found.
2016-06-21 Walfred Tedeschi <walfred.tedeschi@intel.com>
* f-valprint.c (f_val_print): Add field names for printing
derived types fields.
2016-06-21 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-linux-tdep.c (s390_iterate_over_regset_sections): Fix typo
in name of last-break regset.
2016-06-21 Pedro Alves <palves@redhat.com>
* fork-child.c (fork_inferior): Switch the child to the main UI
right after vfork. Save/restore the current UI in the parent.
Flush outputs of the main UI instead of the current UI.
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (watchpoint_check): Send watchpoint-deleted output
to all UIs.
2016-06-21 Pedro Alves <palves@redhat.com>
* NEWS: Mention support for running interpreters on separate
UIs and the new new-ui command.
2016-06-21 Pedro Alves <palves@redhat.com>
* interps.c (set_top_level_interpreter): New function, factored
out from captured_main.
(interpreter_completer): Make extern.
* interps.h (set_top_level_interpreter, interpreter_completer):
New declarations.
(captured_main): Use set_top_level_interpreter.
* top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
(open_terminal_stream, new_ui_command): New functions.
(init_main): Install the "new-ui" command.
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
(read_command_lines): Use input_interactive_p instead of
input_from_terminal_p.
* defs.h (struct ui): Forward declare.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this.
* event-top.c (stdin_event_handler): Pass 0 as from_tty argument
to quit_command.
(command_handler): Adjust to per-UI stdin.
(handle_line_of_input): Adjust to per-UI stdin and use
input_interactive_p instead of ISATTY and input_from_terminal_p.
(gdb_readline_no_editing_callback): Adjust to per-UI stdin.
(command_line_handler): Always pass true as "from_tty" parameter
of handle_line_of_input and execute_command.
(async_sigterm_handler): Pass 0 as from_tty argument to
quit_command.
* inflow.c (interactive_mode, show_interactive_mode): Moved to ...
(gdb_has_a_terminal): Don't check interactive_mode here.
(_initialize_inflow): Don't install "set interactive-mode" here.
* main.c (captured_command_loop): Adjust to per-UI stdin.
* mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
stdin.
* top.c (new_ui): Save the stdin stream and whether it's a tty.
(dont_repeat): Adjust to per-UI stdin.
(command_line_input): Adjust to per-UI stdin and to use
input_interactive_p.
(quit_force): Write history if any UI supports interactive input.
(interactive_mode, show_interactive_mode): Move here, from
inflow.c.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this, and check the "interactive_mode"
global instead of calling gdb_has_a_terminal.
(_initialize_top): Install "set interactive-mode" here.
* top.h (struct ui) <stdin_stream, input_interactive_p>: New
fields.
* utils.c (quit): Pass 0 as from_tty argument to quit_force.
(defaulted_query): Adjust to per-UI stdin and to use
input_interactive_p.
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (stdin_event_handler): Don't quit gdb if it was a
secondary UI's input stream that closed. Instead, just delete the
UI.
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (main_ui_): Delete.
(main_ui, current_ui, ui_list): No longer initialize here.
* main.c (captured_main): UI initialization code factored out to
new new_ui function.
(gdb_main): Wrap captured_main with TRY/CATCH instead of
catch_errors.
* top.c (highest_ui_num): New global.
(new_ui): New function.
* top.h (struct ui) <num>: New field.
(new_ui): New declaration.
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
nothing to print. Use should_print_stop_to_console.
* tui/tui-interp.c (tui_on_normal_stop): Likewise.
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (new_until_break_fsm): Add 'cmd_interp' parameter.
(until_break_fsm_should_stop, until_break_fsm_clean_up): Add
thread parameter.
(until_break_command): Pass command interpreter to thread fsm
ctor.
* cli/cli-interp.c (should_print_stop_to_console): Adjust.
* gdbthread.h (struct thread_control_state) <command_interp>:
Delete field.
* infcall.c (new_call_thread_fsm): Add 'cmd_interp' parameter.
Pass it down.
(call_thread_fsm_should_stop): Add thread parameter.
(call_function_by_hand_dummy): Pass command interpreter to thread
fsm ctor. Pass thread pointer to fsm clean up method.
* infcmd.c: Include interps.h.
(struct step_command_fsm) <thread>: Delete field.
(new_step_command_fsm): Add 'cmd_interp' parameter. Pass it down.
(step_command_fsm_prepare): Remove references to fsm's thread
field.
(step_1): Pass command interpreter to thread
fsm ctor. Pass thread pointer to fsm clean up method.
(step_command_fsm_should_stop, step_command_fsm_clean_up): Add
thread parameter and use it.
(new_until_next_fsm): Add 'cmd_interp' parameter. Pass it down.
(until_next_fsm_should_stop, until_next_fsm_clean_up): Add thread
parameter and use it.
(until_next_command): Pass command interpreter to thread fsm ctor.
(struct finish_command_fsm) <thread>: Delete field.
(finish_command_fsm_ops): Add NULL slot for should_notify_stop.
(new_finish_command_fsm): Add 'cmd_interp' parameter and pass it
down. Remove thread parameter and adjust.
(finish_command_fsm_should_stop, finish_command_fsm_clean_up): Add
thread parameter and use it.
(finish_command): Pass command interpreter to thread fsm ctor.
Don't pass thread.
* infrun.c (follow_fork): Move thread fsm to child fork instead of
command interpreter, only.
(clear_proceed_status_thread): Remove reference to command_interp.
(proceed): Don't record the thread's command interpreter.
(clean_up_just_stopped_threads_fsms): Pass thread to fsm clean_up
method.
(fetch_inferior_event): Pass thread to fsm should_stop method.
* thread-fsm.c (thread_fsm_ctor): Add 'cmd_interp' parameter.
Store it.
(thread_fsm_clean_up, thread_fsm_should_stop): Add thread
parameter and pass it down.
* thread-fsm.h (struct thread_fsm) <command_interp>: New field.
(struct thread_fsm_ops) <clean_up, should_stop>: Add thread
parameter.
(thread_fsm_ctor): Add 'cmd_interp' parameter.
(thread_fsm_clean_up, thread_fsm_should_stop): Add thread
parameter.
* thread.c (thread_cancel_execution_command): Pass thread to
thread fsm clean_up method.
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c: Include gdbthread.h and thread-fsm.h.
(should_print_stop_to_console): New function, factored out from
mi_on_normal_stop_1.
* cli/cli-interp.h (should_print_stop_to_console): Declare.
* mi/mi-interp.c (mi_on_normal_stop_1): Use
should_print_stop_to_console. Pass it the current UI's console
interpreter.
* mi/mi-main.c (captured_mi_execute_command): Use the
INTERP_CONSOLE symbol rather than explicit "console".
2016-06-21 Pedro Alves <palves@redhat.com>
* infcmd.c (prepare_execution_command): Use
all_uis_on_sync_execution_starting.
* infrun.c (all_uis_on_sync_execution_starting): New function.
* infrun.h (all_uis_on_sync_execution_starting): Declare.
2016-06-21 Pedro Alves <palves@redhat.com>
* annotate.c: Include top.h.
(async_background_execution_p): Delete.
(print_value_flags): Check the UI's prompt state rather then
async_background_execution_p.
* event-loop.c (start_event_loop): Set the prompt state to
PROMPT_NEEDED.
* event-top.c (display_gdb_prompt, async_enable_stdin)
(async_disable_stdin): Check the current UI's prompt state instead
of the sync_execution global.
(command_line_handler): Set the prompt state to PROMPT_NEEDED
before running a command, and display the prompt if still needed
afterwards.
* infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
(new_call_thread_fsm): New parameter 'waiting_ui'. Store it.
(call_thread_fsm_should_stop): Set the prompt state to
PROMPT_NEEDED.
(run_inferior_call): Adjust to temporarily set the prompt state to
PROMPT_BLOCKED instead of using the sync_execution global.
(call_function_by_hand_dummy): Pass the current UI to
new_call_thread_fsm.
* infcmd.c: Include top.h.
(continue_1): Check the current UI's prompt state instead of the
sync_execution global.
(continue_command): Validate global execution state before calling
prepare_execution_command.
(step_1): Call all_uis_check_sync_execution_done.
(attach_post_wait): Don't call async_enable_stdin here. Remove
reference to sync_execution.
* infrun.c (sync_execution): Delete global.
(follow_fork_inferior)
(reinstall_readline_callback_handler_cleanup): Check the current
UI's prompt state instead of the sync_execution global.
(check_curr_ui_sync_execution_done)
(all_uis_check_sync_execution_done): New functions.
(fetch_inferior_event): Call all_uis_check_sync_execution_done
instead of trying to determine whether the global sync execution
changed.
(handle_no_resumed): Check the prompt state of all UIs.
(normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
UIs. Emit the "Switching to" notification to all UIs. Enable
stdin in all UIs.
* infrun.h (sync_execution): Delete.
(all_uis_check_sync_execution_done): Declare.
* main.c (captured_command_loop): Don't call
interp_pre_command_loop if the prompt is blocked.
(catch_command_errors, catch_command_errors_const): Adjust.
(captured_main): Set the initial prompt state to PROMPT_NEEDED.
* mi/mi-interp.c (display_mi_prompt): Set the prompt state to
PROMPTED.
(mi_interpreter_resume): Don't clear sync_execution. Remove hack
comment.
(mi_execute_command_input_handler): Set the prompt state to
PROMPT_NEEDED before executing the command, and only display the
prompt if the prompt state is PROMPT_NEEDED afterwards.
(mi_on_resume_1): Adjust to check the prompt state.
* target.c (target_terminal_inferior): Adjust to check the prompt
state.
* top.c (wait_sync_command_done, maybe_wait_sync_command_done)
(execute_command): Check the current UI's prompt state instead of
sync_execution.
* top.h (enum prompt_state): New.
(struct ui) <prompt_state>: New field.
(ALL_UIS): New macro.
2016-06-21 Pedro Alves <palves@redhat.com>
* top.c (gdb_secondary_prompt_depth): Delete.
(gdb_in_secondary_prompt_p): Add ui parameter. Use it.
(gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust to
per-UI gdb_secondary_prompt_depth.
* top.h (struct ui) <secondary_prompt_depth>: New field.
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interpreter_pre_command_loop): New
function.
(cli_interp_procs): Install it instead of cli_command_loop.
* cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
* event-top.c (cli_command_loop): Delete.
* interps.c (interp_new): Remove reference to command_loop_proc.
(current_interp_command_loop): Delete.
(interp_pre_command_loop): New function.
(interp_command_loop_ftype): Delete.
* interps.h (interp_pre_command_loop_ftype): New typedef.
(struct interp_procs) <command_loop_proc>: Delele field.
<pre_command_loop_proc>: New field.
(current_interp_command_loop): Delete declaration.
(interp_pre_command_loop): New declaration.
* main.c (captured_command_loop): Call interp_pre_command_loop
instead of current_interp_command_loop and start an event loop.
* mi/mi-interp.c (mi_command_loop): Delete.
(mi_interpreter_pre_command_loop): New.
(mi_interp_procs): Update.
* tui/tui-interp.c (tui_interp_procs): Install
cli_interpreter_pre_command_loop instead of cli_command_loop.
2016-06-21 Pedro Alves <palves@redhat.com>
* interps.c (current_interpreter): New function.
* interps.h (current_interpreter): New declaration.
* mi/mi-cmds.h (raw_stdout): Delete declaration.
* mi/mi-common.h (struct mi_interp) <raw_stdout,
saved_raw_stdout>: New field.
* mi/mi-interp.c (display_mi_prompt): New parameter 'mi'. Adjust
to per-UI raw_stdout.
(mi_interpreter_init): Adjust to per-UI raw_stdout.
(mi_on_sync_execution_done, mi_execute_command_input_handler)
(mi_command_loop): Pass MI instance to display_mi_prompt.
(mi_on_normal_stop_1, mi_output_running_pid, mi_on_resume_1)
(mi_on_resume): Adjust to per-UI raw_stdout.
(saved_raw_stdout): Delete.
(mi_set_logging): Adjust to per-UI raw_stdout and
saved_raw_stdout.
* mi/mi-main.c (raw_stdout): Delete.
(mi_cmd_gdb_exit, captured_mi_execute_command)
(mi_print_exception, mi_load_progress): Adjust to per-UI
raw_stdout.
(print_diff_now, mi_print_timing_maybe): New ui_file parameter.
Pass it along.
(print_diff): New ui_file parameter. Send output there instead of
raw_stdout.
* mi/mi-main.h (struct ui_file): Forward declare.
(mi_print_timing_maybe): Add ui_file parameter.
2016-06-21 Pedro Alves <palves@redhat.com>
* mi/mi-interp.c (display_mi_prompt): New function.
2016-06-21 Pedro Alves <palves@redhat.com>
* target.c (target_terminal_inferior): Bail out after
unregistering input_fd if not on the main UI.
(target_terminal_ours): Bail out after registering input_fd if not
on the main UI.
(target_terminal_ours_for_output): Bail out if not on the main UI.
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (restore_ui_cleanup): Make extern.
* infrun.c (fetch_inferior_event): Always switch to the main UI.
* top.h (restore_ui_cleanup): Declare.
2016-06-21 Pedro Alves <palves@redhat.com>
PR mi/20034
* cli/cli-interp.c: Include cli-interp.h and event-top.h.
(cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the
UI's input_handler here.
(cli_interpreter_supports_command_editing): New function.
(cli_interp_procs): Install it.
* cli/cli-interp.h: New file.
* event-top.c (async_command_editing_p): Rename to ...
(set_editing_cmd_var): ... this.
(change_line_handler): Add parameter 'editing', and use it. Bail
early if the interpreter doesn't support editing. Don't touch
readline state if editing is off.
(gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
(gdb_rl_callback_handler_reinstall): Assert the current UI is the
main UI.
(display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
not using readline. Check whether the current UI is using command
editing instead of checking the async_command_editing_p global.
(set_async_editing_command): Delete.
(gdb_setup_readline): Add 'editing' parameter. Only allow editing
on the main UI. Don't touch readline state if editing is off.
(gdb_disable_readline): Don't touch readline state if editing is
off.
* event-top.h (gdb_setup_readline): Add 'int' parameter.
(set_async_editing_command): Delete declaration.
(change_line_handler, command_line_handler): Declare.
(async_command_editing_p): Rename to ...
(set_editing_cmd_var): ... this.
* infrun.c (reinstall_readline_callback_handler_cleanup): Check
whether the current UI has editing enabled rather than checking
the async_command_editing_p global.
* interps.c (interp_supports_command_editing): New function.
* interps.h (interp_supports_command_editing_ftype): New typedef.
(struct interp_procs) <supports_command_editing_proc>: New field.
(interp_supports_command_editing): Declare.
* mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
gdb_setup_readline. Don't clear the async_command_editing_p
global. Update comments.
* top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
whether the current UI has editing enabled rather than checking
the async_command_editing_p global. Don't touch readline state if
editing is off.
(undo_terminal_modifications_before_exit): Switch to the main UI.
Unconditionally call gdb_disable_readline.
(set_editing): New function.
(show_async_command_editing_p): Rename to ...
(show_editing): ... this. Show the state of the current UI.
(_initialize_top): Adjust.
* top.h (struct ui) <command_editing>: New field.
* tui/tui-interp.c: Include cli/cli-interp.h.
(tui_resume): Pass 1 to gdb_setup_readline. Set the UI's
input_handler.
(tui_interp_procs): Install
cli_interpreter_supports_command_editing.
* tui/tui-io.c (tui_getc): Check whether the current UI has
editing enabled rather than checking the async_command_editing_p
global.
2016-06-21 Pedro Alves <palves@redhat.com>
* top.c: Call gen_ret_current_ui_field_ptr for current_uiout.
* top.h (struct ui) <m_current_uiout>: New field.
* ui-out.c (current_uiout): Delete.
* ui-out.h (current_uiout): Delete.
(current_ui_current_uiout_ptr): New declaration.
(current_uiout): Reimplement as wrapper around
current_ui_current_uiout_ptr.
2016-06-21 Pedro Alves <palves@redhat.com>
* ui-out.c (default_ui_out_impl): Delete.
(def_uiout): Delete.
(current_uiout): Set to NULL.
(default_table_begin, default_table_body, default_table_end)
(default_table_header, default_begin, default_end)
(default_field_int, default_field_skip, default_field_string)
(default_field_fmt, default_spaces, default_text, default_message)
(default_wrap_hint, default_flush, default_data_destroy): Delete.
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (gdb_setup_readline): Pass the UI's outstream and
errstream to stdout_fileopen and stderr_fileopen.
* exceptions.c: Include top.h.
(print_flush): Open the current UI's outstream file descriptor,
instead of hardcoding file descriptor 1.
* main.c (captured_main): Save the main UI's out and error
streams. Adjust stderr_fileopen call.
* top.h (struct ui) <outstream, errstream>: New fields.
* ui-file.c (stderr_fileopen): Add stream parameter. Use it
instead of stderr.
* ui-file.h (stderr_fileopen): Add stream parameter and update
comment.
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (input_fd): Delete.
(stdin_event_handler): Switch to the UI whose input descriptor got
the event. Adjust to per-UI input_fd.
(gdb_setup_readline): Don't set the input_fd global. Adjust to
per-UI input_fd.
(gdb_disable_readline): Adjust to per-UI input_fd.
* event-top.h (input_fd): Delete declaration.
* linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
from the event-loop here.
(linux_nat_terminal_ours): Don't register input_fd in the
event-loop here.
* main.c (captured_main): Adjust to per-UI input_fd.
* remote.c (remote_terminal_inferior): Don't remove input_fd from
the event-loop here.
(remote_terminal_ours): Don't register input_fd in the event-loop
here.
* target.c: Include top.h and event-top.h.
(target_terminal_inferior): Remove input_fd from the event-loop
here.
(target_terminal_ours): Register input_fd in the event-loop.
* top.h (struct ui) <input_fd>: New field.
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (execute_user_command, read_next_line)
(read_next_line): Adjust to per-UI instream.
* event-top.c (stdin_event_handler, command_handler)
(handle_line_of_input, command_line_handler)
(gdb_readline_no_editing_callback, async_sigterm_handler)
(gdb_setup_readline): Likewise.
* inflow.c: Include top.h.
(gdb_has_a_terminal, child_terminal_init_with_pgrp)
(gdb_save_tty_state, child_terminal_inferior)
(child_terminal_ours_1, copy_terminal_info): Use the main UI.
(initialize_stdin_serial): Adjust to per-UI instream.
* main.c (captured_command_loop, captured_main): Adjust to per-UI
instream.
* mi/mi-interp.c (mi_execute_command_wrapper): Likewise.
* python/python.c (python_interactive_command): Likewise.
* terminal.h (struct ui): Forward declare.
(initialize_stdin_serial): Add struct ui parameter.
* top.c (instream): Delete.
(do_restore_instream_cleanup, read_command_file, dont_repeat)
(gdb_readline_no_editing, command_line_input)
(input_from_terminal_p, gdb_init): Adjust to per-UI instream.
* top.h (struct ui) <instream>: New field.
(instream): Delete declaration.
(quit): Adjust to per-UI instream.
2016-06-21 Pedro Alves <palves@redhat.com>
* event-loop.c: Include top.h.
(invoke_async_signal_handlers): Switch to the main UI.
* event-top.c (main_ui_): Update comment.
(main_ui): New global.
* top.h (main_ui): Declare.
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interp): Delete.
(as_cli_interp): New function.
(cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history): Send output to all CLI UIs.
(cli_on_sync_execution_done, cli_on_command_error): Skip output if
the top level interpreter is not a CLI.
(cli_interpreter_init): Don't set cli_interp or install observers
here.
(_initialize_cli_interp): Install observers here.
* event-top.c (main_ui_, ui_list): New globals.
(current_ui): Point to main_ui_.
(restore_ui_cleanup, switch_thru_all_uis_init)
(switch_thru_all_uis_cond, switch_thru_all_uis_next): New
functions.
* mi/mi-interp.c (as_mi_interp): New function.
(mi_interpreter_init): Don't install observers here.
(mi_on_sync_execution_done): Skip output if the top level
interpreter is not a MI.
(mi_new_thread, mi_thread_exit, mi_record_changed)
(mi_inferior_added, mi_inferior_appeared, mi_inferior_exit)
(mi_inferior_removed): Send output to all MI UIs.
(find_mi_interpreter, mi_interp_data): Delete.
(find_mi_interp): New function.
(mi_on_signal_received, mi_on_end_stepping_range)
(mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output
to all MI UIs.
(mi_on_normal_stop): Rename to ...
(mi_on_normal_stop_1): ... this.
(mi_on_normal_stop): Reimplement, sending output to all MI UIs.
(mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted)
(mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted)
(mi_breakpoint_modified, mi_output_running_pid): Send output to
all MI UIs.
(mi_on_resume): Rename to ...
(mi_on_resume_1): ... this. Don't handle infcalls here.
(mi_on_resume): Reimplement, sending output to all MI UIs.
(mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
(mi_memory_changed): Send output to all MI UIs.
(report_initial_inferior): Install observers here.
* top.h (struct ui) <next>: New field.
(ui_list): Declare.
(struct switch_thru_all_uis): New.
(switch_thru_all_uis_init, switch_thru_all_uis_cond)
(switch_thru_all_uis_next): Declare.
(SWITCH_THRU_ALL_UIS): New macro.
* tui/tui-interp.c (tui_interp): Delete global.
(as_tui_interp): New function.
(tui_on_normal_stop, tui_on_signal_received)
(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
(tui_on_no_history): Send output to all TUI UIs.
(tui_on_sync_execution_done, tui_on_command_error): Skip output if
the top level interpreter is not a TUI.
(tui_init): Don't set tui_interp or install observers here.
(_initialize_tui_interp): Install observers here.
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_uiout): Delete, moved into ...
(struct cli_interp): ... this new structure.
(cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history): Use interp_ui_out.
(cli_interpreter_init): If top level, set the cli_interp global.
(cli_interpreter_init): Return the interp's data instead of NULL.
(cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
to cli_uiout being in the interpreter's data.
(cli_interp_procs): New, factored out from _initialize_cli_interp.
(cli_interp_factory): New function.
(_initialize_cli_interp): Call interp_factory_register.
* interps.c (get_interp_info): New, factored out from ...
(get_current_interp_info): ... this.
(interp_new): Add parameter 'data'. Store it.
(struct interp_factory): New function.
(interp_factory_p): New typedef. Define a VEC_P.
(interpreter_factories): New global.
(interp_factory_register): New function.
(interp_add): Add 'ui' parameter. Use get_interp_info and
interp_lookup_existing.
(interp_lookup): Rename to ...
(interp_lookup_existing): ... this. Add 'ui' parameter. Don't
check for NULL or empty name here.
(interp_lookup): Add 'ui' parameter and reimplement.
(interp_set_temp, interpreter_exec_cmd): Adjust.
(interpreter_completer): Complete on registered interpreter
factories instead of interpreters.
* interps.h (interp_factory_func): New typedef.
(interp_factory_register): Declare.
(interp_new, interp_add): Adjust.
(interp_lookup): Declare.
* main.c (captured_main): Adjust.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
(mi_interp_procs): New, factored out from
_initialize_mi_interp.
(mi_interp_factory): New function.
* python/python.c (execute_gdb_command): Adjust.
* tui/tui-interp.c (tui_init): If top level, set the tui_interp
global.
(tui_interp_procs): New.
(tui_interp_factory): New function.
(_initialize_tui_interp): Call interp_factory_register.
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1): Access the current UI's
async field instead of the interpreter_async global.
* cli/cli-script.c (execute_user_command, while_command)
(if_command, script_from_file): Likewise.
* compile/compile.c: Include top.h instead of interps.h.
(compile_file_command, compile_code_command)
(compile_print_command): Access the current UI's async field
instead of the interpreter_async global.
* guile/guile.c: Include top.h instead of interps.h.
(guile_repl_command, guile_command, gdbscm_execute_gdb_command):
Access the current UI's async field instead of the
interpreter_async global.
* guile/scm-ports.c: Include top.h instead of interps.h.
(ioscm_with_output_to_port_worker): Access the current UI's async
field instead of the interpreter_async global.
* inf-loop.c (inferior_event_handler): Likewise.
* infcall.c (run_inferior_call): Likewise.
* infrun.c (reinstall_readline_callback_handler_cleanup)
(fetch_inferior_event): Likewise.
* interps.c (interpreter_async): Delete.
(struct ui_interp_info): New.
(get_current_interp_info): New function.
(interp_list, current_interpreter, top_level_interpreter_ptr):
Delete.
(interp_add, interp_set, interp_lookup, interp_ui_out)
(current_interp_set_logging, interp_set_temp)
(current_interp_named_p): Adjust to per-UI interpreters.
(command_interpreter): Delete.
(command_interp, current_interp_command_loop, interp_quiet_p)
(interp_exec, interpreter_exec_cmd, interpreter_completer)
(top_level_interpreter, top_level_interpreter_data): Adjust to
per-UI interpreters.
* interps.h (interpreter_async): Delete.
* main.c (captured_command_loop): Access the current UI's async
field instead of the interpreter_async global.
* python/python.c (python_interactive_command, python_command)
(execute_gdb_command): Likewise.
* top.c (maybe_wait_sync_command_done, execute_command_to_string):
Access the current UI's async field instead of the
interpreter_async global.
* top.h (struct tl_interp_info): Forward declare.
(struct ui) <interp_info, async>: New fields.
2016-06-21 Pedro Alves <palves@redhat.com>
* main.c (gdb_stdout, gdb_stderr, gdb_stdlog, gdb_stdin): Delete
globals.
(gen_ret_current_ui_field_ptr): New macro. Use it to generate
wrappers for gdb_stdout, gdb_stderr, gdb_stdlog and gdb_stdin.
* top.h (struct ui) <m_gdb_stdout, m_gdb_stdin, m_gdb_stderr,
m_gdb_stdlog>: New fields.
(current_ui_gdb_stdout_ptr, current_ui_gdb_stdin_ptr)
(current_ui_gdb_stderr_ptr, current_ui_gdb_stdlog_ptr): Declare.
(gdb_stdout, gdb_stdin, gdb_stderr, gdb_stdlog): Reimplement as
macros.
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c: Update readline-related comments.
(input_handler, call_readline): Delete globals.
(gdb_rl_callback_handler): Call the current UI's input_handler
method.
(change_line_handler): Adjust to set current UI's properties
instead of globals.
(current_ui_, current_ui): New globals.
(get_command_line_buffer): Rewrite to refer to the current UI.
(stdin_event_handler): Adjust to call the call_readline method of
the current UI.
(gdb_readline_no_editing_callback): Adjust to call the current UI's
input_handler method.
(gdb_setup_readline): Adjust to set current UI's properties
instead of globals.
* event-top.h (call_readline, input_handler): Delete declarations.
* mi/mi-interp.c (mi_interpreter_resume): Adjust to set current
UI's properties instead of globals.
* top.c (gdb_readline_wrapper_cleanup): Adjust to set current UI's
properties instead of globals.
(gdb_readline_wrapper): Adjust to call and set current UI's
methods instead of globals.
* top.h: Include buffer.h and event-loop.h.
(struct ui): New struct.
(current_ui): New declaration.
2016-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_exception_name_addr_1): Add comment.
(print_it_exception): Select the current frame.
2016-06-17 Yan-Ting Lin <currygt52@gmail.com>
* Makefile.in (ALL_TARGET_OBS): Add nds32-tdep.o.
(HFILES_NO_SRCDIR): Add nds32-tdep.h.
(ALLDEPFILES): Add nds32-tdep.c.
* NEWS: Mention new NDS32 port.
* configure.tgt: Add NDS32.
* nds32-tdep.c: New file.
* nds32-tdep.h: New file.
* features/Makefile (XMLTOC): Add nds32.xml.
* features/nds32-core.xml: New file.
* features/nds32-fpu.xml: New file.
* features/nds32-system.xml: New file.
* features/nds32.c: New file (generated).
* features/nds32.xml: New file.
2016-06-14 John Baldwin <jhb@FreeBSD.org>
* v850-tdep.c (v850_use_struct_convention): Trim type length checks.
2016-06-14 John Baldwin <jhb@FreeBSD.org>
* tui/tui-stack.c (tui_show_frame_info): Fix type mismatch.
2016-06-14 John Baldwin <jhb@FreeBSD.org>
* rs6000-tdep.c (ppc_process_record_op31): Initialize ra.
2016-06-13 Nick Clifton <nickc@redhat.com>
* gdbtypes.c (replace_type): Fix assertion.
2016-06-10 Tom Tromey <tom@tromey.com>
* gdbtypes.c (arch_type, arch_integer_type, arch_character_type)
(arch_boolean_type, arch_float_type, arch_complex_type)
(arch_flags_type, append_flags_type_field)
(append_flags_type_flag, arch_composite_type)
(append_composite_type_field_raw)
(append_composite_type_field_aligned)
(append_composite_type_field): Make "name" parameter const.
* gdbtypes.h (arch_type, arch_integer_type, arch_character_type)
(arch_boolean_type, arch_float_type, arch_complex_type)
(append_composite_type_field, append_composite_type_field_aligned)
(append_composite_type_field_raw, arch_flags_type)
(append_flags_type_field, append_flags_type_flag): Constify.
2016-06-10 Tom Tromey <tom@tromey.com>
PR rust/20110:
* rust-exp.y (lex_number): Don't truncate large numbers to i32.
2016-06-10 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_OBS): Remove rust-exp.o.
(YYFILES): Add rust-exp.c.
(YYOBJ): Add rust-exp.o.
(local-maintainer-clean): Remove rust-exp.c.
2016-06-09 Toshihito Kikuchi <k.toshihito@yahoo.de>
* NEWS: Mention that GDB now supports a negative repeat count in
the 'x' command.
* printcmd.c (decode_format): Allow '-' in the parameter
"string_ptr" to accept a negative repeat count.
(find_instruction_backward): New function.
(read_memory_backward): New function.
(integer_is_zero): New function.
(find_string_backward): New function.
(do_examine): Use new functions to examine memory backward.
(_initialize_printcmd): Mention that 'x' command supports a negative
repeat count.
2016-06-09 Toshihito Kikuchi <k.toshihito@yahoo.de>
* MAINTAINERS (Write After Approval): Add Toshihito Kikuchi.
2016-06-09 Tom Tromey <tom@tromey.com>
PR python/19819:
* python/py-xmethods.c (invoke_method_name)
(py_get_result_type_method_name, py_invoke_method_name): Remove.
(gdbpy_initialize_xmethods): Don't initialize
py_invoke_method_name, py_get_result_type_method_name.
2016-06-07 Simon Marchi <simon.marchi@ericsson.com>
* mi/mi-interp.c (mi_record_changed): Add missing braces.
2016-06-07 Bernhard Heckel <bernhard.heckel@intel.com>
* findvar.c (follow_static_link): Check for valid pointer.
2016-06-06 Simon Marchi <simon.marchi@ericsson.com>
* NEWS: Mention the new fields in =record-started.
* common/btrace-common.h (btrace_format_short_string): New function
declaration.
* common/btrace-common.c (btrace_format_short_string): New
function.
* mi/mi-interp.c (mi_record_changed): Output method and format
fields in the =record-started record.
* record-btrace.c (record_btrace_open): Adapt record_changed
notification.
* record-full.c (record_full_open): Likewise.
* record.c (cmd_record_stop): Likewise.
2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (handle_output_debug_string): Return type of
gdb_signal_from_host() is gdb_signal, not an int.
(windows_get_exec_module_filename): Add pointer casts for C++.
2016-06-02 Tom Tromey <tom@tromey.com>
PR python/18984:
* python/python.c (gdbpy_solib_name): Use GDB_PY_LLU_ARG.
2016-06-01 Pedro Alves <palves@redhat.com>
* remote-fileio.c (remote_fio_ctrl_c_flag, remote_fio_sa)
(remote_fio_osa)
(remote_fio_ofunc, remote_fileio_sig_init, remote_fileio_sig_set)
(remote_fileio_sig_exit, remote_fileio_ctrl_c_signal_handler):
Delete.
(remote_fileio_o_quit_handler): New global.
(remote_fileio_quit_handler): New function.
(remote_fileio_reply): Check the quit flag instead of the custom
'remote_fio_ctrl_c_flag' flag. Restore the quit handler instead
of changing the SIGINT handler.
(do_remote_fileio_request): Override the quit handler instead of
changing the SIGINT handler.
2016-06-01 Nick Clifton <nickc@redhat.com>
* common/common-utils.c (xmalloc_failed): New function. Provided
so that the version in libiberty is not linked in.
2016-06-01 Markus Metzger <markus.t.metzger@intel.com>
* infcmd.c (skip_finish_frames): New.
(finish_command): Call skip_finish_frames.
2016-06-01 Yao Qi <yao.qi@linaro.org>
PR remote/19998
* remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Call
quit_serial_event_set.
2016-06-01 Joel Brobecker <brobecker@adacore.com>
GDB 7.11.1 released.
2016-05-31 Martin Galvan <martin.galvan@tallertechnologies.com>
PR c++/19893
* dwarf2loc.c (coerce_pieced_ref, indirect_synthetic_pointer,
fetch_const_value_from_synthetic_pointer): New functions.
(indirect_pieced_value): Move lower half to indirect_synthetic_pointer.
(pieced_value_funcs): Implement coerce_ref.
* valops.c (value_addr): Call coerce_ref for synthetic references.
* valprint.c (valprint_check_validity): Return true for synthetic
references. Also, don't show "<synthetic pointer>" if they reference
addressable values.
(generic_val_print_ref): Handle synthetic references. Also move some
code to print_ref_address.
(print_ref_address, get_value_addr_contents): New functions.
2016-05-30 Jan Kratochvil <jan.kratochvil@redhat.com>
PR c++/15231
* dwarf2read.c (enum pc_bounds_kind): Add PC_BOUNDS_INVALID.
(process_psymtab_comp_unit_reader, read_func_scope): Adjust callers.
(read_lexical_block_scope): Import DIEs from bare DW_TAG_lexical_block.
(read_call_site_scope): Adjust callers.
(dwarf2_get_pc_bounds): Implement pc_bounds_invalid.
(dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
2016-05-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum
* dwarf2read.c (enum pc_bounds_kind) New.
(dwarf2_get_pc_bounds): Use it in the declaration.
(process_psymtab_comp_unit_reader): Adjust caller. Rename has_pc_info
to cu_bounds_kind.
(read_func_scope, read_lexical_block_scope, read_call_site_scope):
Adjust callers.
(dwarf2_get_pc_bounds): Use enum pc_bounds_kind in the definition.
(dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.
2016-05-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (QCatchSyscalls): Remove the parameter. Include ...
(QCatchSyscalls:1 in qSupported) ... this separate entry which got
deleted.
2016-05-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (N stop reply): Remove empty line.
2016-05-28 Alan Modra <amodra@gmail.com>
* compile/compile-object-load.c (link_callbacks_multiple_definition,
link_callbacks_warning, link_callbacks_undefined_symbol,
link_callbacks_undefined_symbol, link_callbacks_reloc_overflow,
link_callbacks_reloc_dangerous,
link_callbacks_unattached_reloc): Return void.
2016-05-27 Andrew Burgess <andrew.burgess@embecosm.com>
* opencl-lang.c (evaluate_subexp_opencl): If
EVAL_AVOID_SIDE_EFFECTS mode, forward the VALUE_LVAL attribute to
the returned value in the STRUCTOP_STRUCT case.
2016-05-27 Andrew Burgess <andrew.burgess@embecosm.com>
* eval.c (evaluate_subexp_standard): If EVAL_AVOID_SIDE_EFFECTS
mode, forward the VALUE_LVAL attribute to the returned value in
the STRUCTOP_PTR case.
2016-05-25 Tom Tromey <tom@tromey.com>
* python/py-value.c (value_object_as_number): Use correct spelling
of HAVE_LIBPYTHON2_4.
2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
* f-typeprint.c (f_type_print_base): Replace 0 by show.
2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
* f-typeprint.c (f_type_print_base): Decrease show by one.
2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
* f-typeprint.c (f_type_print_base): Don't print fields when show < 0.
2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
* f-typeprint.c (f_type_print_base): Take print level into account.
2016-05-24 Tom Tromey <tom@tromey.com>
PR python/17386:
* python/py-value.c (value_object_as_number): Add
nb_inplace_floor_divide, nb_inplace_true_divide, nb_index.
2016-05-24 Tom Tromey <tom@tromey.com>
* python/py-value.c (value_object_as_number): Add
nb_inplace_divide for Python 2.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/17981:
* python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
when there are no breakpoints.
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (attach_proc_task_lwp_callback): Mark the lwp
resumed, and add the thread to GDB's thread list.
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (get_pending_status): If the thread reported the
event to the core and it's pending, use the pending status signal
number.
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (lwp_lwpid_htab): New htab.
(lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
(lwp_lwpid_htab_add_lwp): New functions.
(lwp_list): Tweak comment.
(lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
functions.
(purge_lwp_list): Rewrite, using htab_traverse_noresize.
(add_initial_lwp): Add lwp to htab too. Use lwp_list_add.
(delete_lwp): Use lwp_list_remove. Remove htab too.
(find_lwp_pid): Search in htab.
(_initialize_linux_nat): Call lwp_lwpid_htab_create.
* linux-nat.h (struct lwp_info) <prev>: New field.
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (lwp_lwpid_htab): New htab.
(lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
(lwp_lwpid_htab_add_lwp): New functions.
(lwp_list): Tweak comment.
(lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
functions.
(purge_lwp_list): Rewrite, using htab_traverse_noresize.
(add_initial_lwp): Add lwp to htab too. Use lwp_list_add.
(delete_lwp): Use lwp_list_remove. Remove htab too.
(find_lwp_pid): Search in htab.
(_initialize_linux_nat): Call lwp_lwpid_htab_create.
* linux-nat.h (struct lwp_info) <prev>: New field.
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (linux_resume_one_lwp_throw): Clear the LWP's core
field.
(linux_nat_update_thread_list): Don't fetch the core if already
known.
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-tdep.c (find_mapping_size): Delete.
(linux_vsyscall_range_raw): Rewrite reading from
/proc/PID/task/PID/maps directly instead of using
gdbarch_find_memory_regions.
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (report_thread_events): New global.
(linux_handle_extended_wait): Report
TARGET_WAITKIND_THREAD_CREATED if thread event reporting is
enabled.
(wait_lwp, linux_nat_filter_event): Report all thread exits if
thread event reporting is enabled. Remove comment.
(filter_exit_event): New function.
(linux_nat_wait_1): Use it.
(linux_nat_thread_events): New function.
(linux_nat_add_target): Install it as target_thread_events method.
2016-05-24 Yan-Ting Lin <currygt52@gmail.com>
* MAINTAINERS (Write After Approval): Add "Yan-Ting Lin".
2016-05-23 Yao Qi <yao.qi@arm.com>
* arch-utils.c (default_code_of_frame_writable): New function.
* arch-utils.h (default_code_of_frame_writable): Declare.
* arm-tdep.c (arm_code_of_frame_writable): New function.
(arm_gdbarch_init): Install gdbarch method
code_of_frame_writable if the target is M-profile.
* frame.c (skip_unwritable_frames): New function.
* frame.h (skip_unwritable_frames): Declare.
* gdbarch.sh (code_of_frame_writable): New.
* gdbarch.c, gdbarch.h: Re-generated.
* infcmd.c (finish_command): Call skip_unwritable_frames.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/19438, PR python/18393:
* python/py-objfile.c (objfpy_initialize): Initialize self->dict.
* python/py-progspace.c (pspy_initialize): Initialize self->dict.
2016-05-23 Gary Benson <gbenson@redhat.com>
* nat/gdb_thread_db.h (td_thr_validate_ftype): Remove typedef.
* linux-thread-db.c (struct thread_db_info) <td_thr_validate_p>:
Remove field.
(try_thread_db_load_1): Remove td_thr_validate initialization.
2016-05-23 Jon Boden <jon@ubuntubsd.org> (tiny change)
* configure.ac: Search for libutil-freebsd as alternative to libutil.
* configure: Re-generated.
2016-05-19 Andreas Schwab <schwab@suse.de>
* ia64-libunwind-tdep.c (libunwind_descr): Add cast from void *.
(libunwind_frame_set_descr): Likewise.
(libunwind_frame_cache): Likewise.
(libunwind_frame_dealloc_cache): Likewise.
(libunwind_frame_sniffer): Likewise.
(libunwind_search_unwind_table): Likewise.
(libunwind_sigtramp_frame_sniffer): Likewise.
(libunwind_get_reg_special): Likewise.
(libunwind_load): Likewise.
* ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
(ia64_linux_store_register): Likewise.
(ia64_linux_xfer_partial): Likewise.
* ia64-tdep.c (ia64_access_reg): Likewise.
(ia64_access_fpreg): Likewise.
(ia64_access_rse_reg): Likewise.
(ia64_access_rse_fpreg): Likewise.
2016-05-18 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_subscript): Initialize "high".
2016-05-17 Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20045
* mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
of target_is_async_p.
2016-05-17 Simon Marchi <simon.marchi@ericsson.com>
PR gdb/18077
* mi/mi-main.c (run_one_inferior): Use run target to determine
whether to run async or not.
(mi_cmd_exec_run): Likewise.
2016-05-17 Tom Tromey <tom@tromey.com>
* std-operator.def (OP_RANGE): Rename from OP_F90_RANGE.
* rust-lang.c: Don't include f-lang.h.
(rust_range, rust_compute_range, rust_subscript)
(rust_evaluate_subexp): Update.
* rust-exp.y: Don't include f-lang.h.
(ast_range, convert_ast_to_expression): Update.
* parse.c (operator_length_standard): Update.
* f-lang.h (enum f90_range_type): Move to expression.h.
* f-exp.y: Use OP_RANGE.
* expression.h (enum range_type): New enum; renamed from
f90_range_type.
* expprint.c: Don't include f-lang.h.
(print_subexp_standard, dump_subexp_body_standard): Use OP_RANGE.
* eval.c (value_f90_subarray, evaluate_subexp_standard): Update.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add Rust item.
2016-05-17 Tom Tromey <tom@tromey.com>
Manish Goregaokar <manishsmail@gmail.com>
* symtab.c (symbol_find_demangled_name): Handle Rust.
* symfile.c (init_filename_language_table): Treat ".rs" as Rust.
* std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New
constants.
* rust-lang.h: New file.
* rust-lang.c: New file.
* rust-exp.y: New file.
* dwarf2read.c (read_file_scope): Add Rust producer sniffing.
(dwarf2_compute_name, read_func_scope, read_structure_type)
(read_base_type, read_subrange_type, set_cu_language)
(new_symbol_full, determine_prefix): Handle Rust.
* defs.h (enum language) <language_rust>: New constant.
* Makefile.in (SFILES): Add rust-exp.y, rust-lang.c.
(COMMON_OBS): Add rust-exp.o, rust-lang.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* valprint.h (struct generic_val_print_array) <array_start,
array_end>: New fields.
* valprint.c (generic_val_print_array): Add "decorations"
parameter. Use "array_start", "array_end".
(generic_val_print) <TYPE_CODE_ARRAY>: Update.
* p-valprint.c (p_decorations): Update.
* m2-valprint.c (m2_decorations): Update.
* f-valprint.c (f_decorations): Update.
* c-valprint.c (c_decorations): Update.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* expprint.c: Include f-lang.h.
(print_subexp_standard, dump_subexp_body_standard): Handle
OP_F90_RANGE.
2016-05-17 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Search .y files for initialization
functions.
2016-05-12 Doug Evans <dje@google.com>
PR symtab/19999
* dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
add base_offset.
2016-05-10 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* iq2000-tdep.c (iq2000_scan_prologue): Remove if that shouldn't guard
anything.
* linespec.c (add_sal_to_sals): Restore call to symtab_to_fullname.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-tdep.c (arm_elf_make_msymbol_special): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
2016-05-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused
variables.
* aarch64-tdep.c (aarch64_skip_prologue): Likewise.
(aarch64_scan_prologue): Likewise.
(aarch64_prologue_prev_register): Likewise.
(aarch64_dwarf2_prev_register): Likewise.
(pass_in_v): Likewise.
(aarch64_push_dummy_call): Likewise.
(aarch64_breakpoint_from_pc): Likewise.
(aarch64_return_in_memory): Likewise.
(aarch64_return_value): Likewise.
(aarch64_displaced_step_b_cond): Likewise.
(aarch64_displaced_step_cb): Likewise.
(aarch64_displaced_step_tb): Likewise.
(aarch64_gdbarch_init): Likewise.
(aarch64_process_record): Likewise.
* alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise.
* alpha-tdep.c (_initialize_alpha_tdep): Likewise.
* amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
* amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise.
* amd64-tdep.c (fixup_riprel): Likewise.
* amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise.
(amd64_windows_frame_decode_insns): Likewise.
(amd64_windows_frame_cache): Likewise.
(amd64_windows_frame_prev_register): Likewise.
(amd64_windows_frame_this_id): Likewise.
(amd64_windows_init_abi): Likewise.
* arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise.
(arm_linux_get_next_pcs_syscall_next_pc): Likewise.
* arm-symbian-tdep.c (arm_symbian_init_abi): Likewise.
* arm-tdep.c (arm_make_epilogue_frame_cache): Likewise.
(arm_epilogue_frame_prev_register): Likewise.
(arm_record_vdata_transfer_insn): Likewise.
(arm_record_exreg_ld_st_insn): Likewise.
* auto-load.c (execute_script_contents): Likewise.
(print_scripts): Likewise.
* avr-tdep.c (avr_frame_prev_register): Likewise.
(avr_push_dummy_call): Likewise.
* bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise.
* break-catch-throw.c (fetch_probe_arguments): Likewise.
* breakpoint.c (breakpoint_xfer_memory): Likewise.
(breakpoint_init_inferior): Likewise.
(breakpoint_inserted_here_p): Likewise.
(software_breakpoint_inserted_here_p): Likewise.
(hardware_breakpoint_inserted_here_p): Likewise.
(bpstat_what): Likewise.
(break_range_command): Likewise.
(save_breakpoints): Likewise.
* coffread.c (coff_symfile_read): Likewise.
* cris-tdep.c (cris_push_dummy_call): Likewise.
(cris_scan_prologue): Likewise.
(cris_register_size): Likewise.
(_initialize_cris_tdep): Likewise.
* d-exp.y: Likewise.
* dbxread.c (dbx_read_symtab): Likewise.
(process_one_symbol): Likewise.
(coffstab_build_psymtabs): Likewise.
(elfstab_build_psymtabs): Likewise.
* dicos-tdep.c (dicos_init_abi): Likewise.
* disasm.c (do_mixed_source_and_assembly): Likewise.
(gdb_disassembly): Likewise.
* dtrace-probe.c (dtrace_process_dof): Likewise.
* dwarf2read.c (error_check_comp_unit_head): Likewise.
(build_type_psymtabs_1): Likewise.
(skip_one_die): Likewise.
(process_imported_unit_die): Likewise.
(dwarf2_physname): Likewise.
(read_file_scope): Likewise.
(setup_type_unit_groups): Likewise.
(create_dwo_cu_reader): Likewise.
(create_dwo_cu): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(lookup_dwo_unit_in_dwp): Likewise.
(free_dwo_file): Likewise.
(check_producer): Likewise.
(dwarf2_add_typedef): Likewise.
(dwarf2_add_member_fn): Likewise.
(read_unsigned_leb128): Likewise.
(read_signed_leb128): Likewise.
(dwarf2_const_value): Likewise.
(follow_die_sig_1): Likewise.
(dwarf_decode_macro_bytes): Likewise.
* extension.c (restore_active_ext_lang): Likewise.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
* ft32-tdep.c (ft32_analyze_prologue): Likewise.
* gdbtypes.c (lookup_typename): Likewise.
(resolve_dynamic_range): Likewise.
(check_typedef): Likewise.
* h8300-tdep.c (h8300_is_argument_spill): Likewise.
(h8300_gdbarch_init): Likewise.
* hppa-tdep.c (hppa32_push_dummy_call): Likewise.
(hppa_frame_this_id): Likewise.
(_initialize_hppa_tdep): Likewise.
* hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise.
* hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise.
* i386-dicos-tdep.c (i386_dicos_init_abi): Likewise.
* i386-tdep.c (i386_bnd_type): Likewise.
(i386_gdbarch_init): Likewise.
(i386_mpx_bd_base): Likewise.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise.
* i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise.
* ia64-tdep.c (examine_prologue): Likewise.
(ia64_frame_cache): Likewise.
(ia64_push_dummy_call): Likewise.
* infcmd.c (finish_command_fsm_async_reply_reason): Likewise.
(default_print_one_register_info): Likewise.
* infrun.c (infrun_thread_ptid_changed): Likewise.
(thread_still_needs_step_over): Likewise.
(stop_all_threads): Likewise.
(restart_threads): Likewise.
(keep_going_stepped_thread): Likewise.
* iq2000-tdep.c (iq2000_scan_prologue): Likewise.
* language.c (language_init_primitive_type_symbols): Likewise.
* linespec.c (add_sal_to_sals): Likewise.
* linux-nat.c (status_callback): Likewise.
(kill_unfollowed_fork_children): Likewise.
(linux_nat_kill): Likewise.
* linux-tdep.c (linux_fill_prpsinfo): Likewise.
* linux-thread-db.c (thread_db_notice_clone): Likewise.
(record_thread): Likewise.
* location.c (string_to_event_location_basic): Likewise.
* m32c-tdep.c (m32c_prev_register): Likewise.
* m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
* m32r-tdep.c (decode_prologue): Likewise.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* machoread.c (macho_symtab_read): Likewise.
(macho_symfile_read): Likewise.
(macho_symfile_offsets): Likewise.
* maint.c (set_per_command_cmd): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
(mi_cmd_stack_list_variables): Likewise.
* mi/mi-main.c (mi_cmd_exec_run): Likewise.
(output_register): Likewise.
(mi_cmd_execute): Likewise.
(mi_cmd_trace_define_variable): Likewise.
(print_variable_or_computed): Likewise.
* minsyms.c (prim_record_minimal_symbol_full): Likewise.
* mn10300-tdep.c (mn10300_frame_prev_register): Likewise.
* msp430-tdep.c (msp430_pseudo_register_write): Likewise.
* mt-tdep.c (mt_registers_info): Likewise.
* nios2-tdep.c (nios2_analyze_prologue): Likewise.
(nios2_push_dummy_call): Likewise.
(nios2_frame_unwind_cache): Likewise.
(nios2_stub_frame_cache): Likewise.
(nios2_stub_frame_sniffer): Likewise.
(nios2_gdbarch_init): Likewise.
* ppc-ravenscar-thread.c: Likewise.
* ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
* python/py-evts.c (add_new_registry): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
(bpfinishpy_detect_out_scope_cb): Likewise.
* python/py-framefilter.c (py_print_value): Likewise.
* python/py-inferior.c (infpy_write_memory): Likewise.
* python/py-infevents.c (create_inferior_call_event_object): Likewise.
* python/py-infthread.c (thpy_get_ptid): Likewise.
* python/py-linetable.c (ltpy_get_pcs_for_line): Likewise.
(ltpy_get_all_source_lines): Likewise.
(ltpy_is_valid): Likewise.
(ltpy_iternext): Likewise.
* python/py-symtab.c (symtab_and_line_to_sal_object): Likewise.
* python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise.
(unwind_infopy_str): Likewise.
* python/py-varobj.c (py_varobj_get_iterator): Likewise.
* ravenscar-thread.c (ravenscar_inferior_created): Likewise.
* rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
* s390-linux-tdep.c (s390_supply_tdb_regset): Likewise.
(s390_frame_prev_register): Likewise.
(s390_dwarf2_frame_init_reg): Likewise.
(s390_record_vr): Likewise.
(s390_process_record): Likewise.
* score-tdep.c (score_push_dummy_call): Likewise.
(score3_analyze_prologue): Likewise.
* sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
* sh64-tdep.c (sh64_analyze_prologue): Likewise.
(sh64_push_dummy_call): Likewise.
(sh64_extract_return_value): Likewise.
(sh64_do_fp_register): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Likewise.
* solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise.
(darwin_solib_read_all_image_info_addr): Likewise.
* solib-dsbt.c (enable_break): Likewise.
* solib-frv.c (enable_break2): Likewise.
(frv_fdpic_find_canonical_descriptor): Likewise.
* solib-svr4.c (svr4_handle_solib_event): Likewise.
* sparc-tdep.c (sparc_skip_stack_check): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise.
* sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise.
* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
* stack.c (read_frame_local): Likewise.
* symfile.c (symbol_file_add_separate): Likewise.
(remove_symbol_file_command): Likewise.
* symmisc.c (maintenance_print_one_line_table): Likewise.
* symtab.c (symbol_cache_flush): Likewise.
(basic_lookup_transparent_type): Likewise.
(sort_search_symbols_remove_dups): Likewise.
* target.c (target_memory_map): Likewise.
(target_detach): Likewise.
(target_resume): Likewise.
(acquire_fileio_fd): Likewise.
(target_store_registers): Likewise.
* thread.c (print_thread_info_1): Likewise.
* tic6x-tdep.c (tic6x_analyze_prologue): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise.
* tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
(tilegx_analyze_prologue): Likewise.
(tilegx_stack_frame_destroyed_p): Likewise.
(tilegx_frame_cache): Likewise.
* tracefile.c (trace_save): Likewise.
* tracepoint.c (encode_actions_and_make_cleanup): Likewise.
(start_tracing): Likewise.
(print_one_static_tracepoint_marker): Likewise.
* tui/tui.c (tui_enable): Likewise.
* valops.c (value_struct_elt_bitpos): Likewise.
(find_overload_match): Likewise.
(find_oload_champ): Likewise.
* value.c (value_contents_copy_raw): Likewise.
* windows-tdep.c (windows_get_tlb_type): Likewise.
* x86-linux-nat.c (x86_linux_enable_btrace): Likewise.
* xcoffread.c (record_minimal_symbol): Likewise.
(scan_xcoff_symtab): Likewise.
* xtensa-tdep.c (execute_code): Likewise.
(xtensa_gdbarch_init): Likewise.
(_initialize_xtensa_tdep): Likewise.
2016-05-04 Ulrich Weigand <uweigand@de.ibm.com>
* spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
(spu_bfd_open): Likewise.
2016-05-04 Yao Qi <yao.qi@linaro.org>
PR gdb/19947
* corefile.c (read_memory): Rename it to ...
(read_memory_object): ... it. Add parameter object.
(read_memory): Call read_memory_object.
(read_stack): Likewise.
(read_code): Likewise.
2016-05-03 Yunlian Jiang <yunlian@google.com>
Doug Evans <dje@google.com>
PR symtab/19914
* dwarf2read.c (open_and_init_dwp_file): Look at backlink if objfile
is separate debug file.
2016-05-03 Don Breazeal <donb@codesourcery.com>
* serial.h (gdb_pipe): Fix argument names in comment.
2016-05-03 Pedro Alves <palves@redhat.com>
PR python/20037
* python/python.c (_initialize_python) [IS_PY3K]: xstrdup/xfree
oldloc.
2016-05-03 Pedro Alves <palves@redhat.com>
* python/python.c (_initialize_python) [IS_PY3K]: Remove dead
code.
2016-05-03 Pedro Alves <palves@redhat.com>
* configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic".
* configure: Regenerate.
2016-05-03 Pedro Alves <palves@redhat.com>
* configure.ac (checking for the dynamic export flag): Add
$PYTHON_CPPFLAGS to CPPFLAGS.
* configure: Regenerate.
2016-05-03 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* symfile.c (find_pc_overlay): Add braces to avoid -Wparentheses
warning.
(find_pc_mapped_section): Likewise.
(list_overlays_command): Likewise.
2016-05-02 Eli Zaretskii <eliz@gnu.org>
* windows-nat.c (_initialize_check_for_gdb_ini): Fix off-by-one
error in allocation of space for "$HOME/.gdbinit" string. This
caused GDB to abort on startup whenever a '~/gdb.ini' file was
actually found, because xsnprintf would hit an assertion
violation.
2016-04-28 Simon Marchi <simon.marchi@ericsson.com>
* cli/cli-decode.c (help_cmd_list): Do not list commands that
are deprecated.
2016-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
* remote.c (remote_start_remote): Detect PACKET_vFile_setfs.support.
2016-04-27 Martin Galvan <martin.galvan@tallertechnologies.com>
* c-valprint.c (c_value_print): Always convert val back to reference
type if we converted it to a pointer type.
2016-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
* configure.ac: Enhance configure check for babeltrace to reject
non-C++-enabled versions.
* configure: Regenerate.
2016-04-26 Sanimir Agovic <sanimir.agovic@intel.com>
Keven Boell <keven.boell@intel.com>
Bernhard Heckel <bernhard.heckel@intel.com>
* f-valprint.c (f77_create_arrayprint_offset_tbl): Remove
function.
(F77_DIM_SIZE, F77_DIM_OFFSET): Remove macro.
(f77_print_array_1): Use value_subscript to subscript a
value array.
(f77_print_array): Remove call to f77_create_arrayprint_offset_tbl.
(f_val_print): Use value_field to construct a field value.
2016-04-26 Bernhard Heckel <bernhard.heckel@intel.com>
* valarith.c (value_address): Resolve dynamic types.
2016-04-26 Bernhard Heckel <bernhard.heckel@intel.com>
Keven Boell <kevel.boell@intel.com>
* NEWS: Add new supported features for fortran.
* gdbtypes.c (remove_dyn_prop): New.
(resolve_dynamic_struct): Keep type length for fortran structs.
* gdbtypes.h: Forward declaration of new function.
* value.c (value_address): Return dynamic resolved location of a value.
(set_value_component_location): Adjust the value address
for single value prints.
(value_primitive_field): Support value types with a dynamic location.
(set_internalvar): Remove dynamic location property of
internal variables.
2016-04-25 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* mem-break.c (set_raw_breakpoint_at): Create a raw breakpoint
object. Insert it if it is not inserted yet. Increase the
refcount and link it into the proc's raw breakpoint list.
2016-04-25 Yao Qi <yao.qi@linaro.org>
* breakpoint.c (should_be_inserted): Return 0 if the location's
owner is not single step breakpoint or single step breakpoint's
thread isn't the thread which is stepping past a breakpoint.
* gdbarch.sh (software_single_step): Update comments.
* gdbarch.h: Regenerated.
* infrun.c (struct step_over_info) <thread>: New field.
(set_step_over_info): New argument 'thread'. Callers updated.
(clear_step_over_info): Set field thread to -1.
(thread_is_stepping_over_breakpoint): New function.
* infrun.h (thread_is_stepping_over_breakpoint): Declaration.
2016-04-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* ppc-linux-nat.c (ppc_linux_read_description): Use PPC_FEATURE_HAS_VSX
and PPC_FEATURE_HAS_ALTIVEC to check if such features are available.
2016-04-22 Yao Qi <yao.qi@linaro.org>
* valops.c (read_value_memory): New local variable 'stack'.
Set it to either TARGET_OBJECT_STACK_MEMORY or
TARGET_OBJECT_MEMORY.
2016-04-22 Pedro Alves <palves@redhat.com>
* ada-exp.y: Remove all yy symbol remappings.
(GDB_YY_REMAP_PREFIX): Define.
Include "yy-remap.h".
* ada-lang.c (ada_language_defn): Adjust.
* ada-lang.h (ada_error): Rename to ...
(ada_yyerror): ... this.
* c-exp.y: Remove all yy symbol remappings.
(GDB_YY_REMAP_PREFIX): Define.
Include "yy-remap.h".
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Adjust.
* c-lang.h (c_error): Rename to ...
(c_yyerror): ... this.
* d-exp.y: Remove all yy symbol remappings.
(GDB_YY_REMAP_PREFIX): Define.
Include "yy-remap.h".
* d-lang.c (d_language_defn): Adjust.
* d-lang.h (d_error): Rename to ...
(d_yyerror): ... this.
* f-exp.y: Remove all yy symbol remappings.
(GDB_YY_REMAP_PREFIX): Define.
Include "yy-remap.h".
* f-lang.c (f_language_defn): Adjust.
* f-lang.h (f_error): Rename to ...
(f_yyerror): ... this.
* go-exp.y: Remove all yy symbol remappings.
(GDB_YY_REMAP_PREFIX): Define.
Include "yy-remap.h".
* go-lang.c (go_language_defn): Adjust.
* go-lang.h (go_error): Rename to ...
(go_yyerror): ... this.
* jv-exp.y: Remove all yy symbol remappings.
(GDB_YY_REMAP_PREFIX): Define.
Include "yy-remap.h".
* jv-lang.c (java_language_defn): Adjust.
* jv-lang.h (java_error): Rename to ...
(java_yyerror): ... this.
* m2-exp.y: Remove all yy symbol remappings.
(GDB_YY_REMAP_PREFIX): Define.
Include "yy-remap.h".
* m2-lang.c (m2_language_defn): Adjust.
* m2-lang.h (m2_error): Rename to ...
(m2_yyerror): ... this.
* objc-exp.y: Remove all yy symbol remappings.
(GDB_YY_REMAP_PREFIX): Define.
Include "yy-remap.h".
* objc-lang.c (objc_language_defn): Adjust.
* opencl-lang.c (opencl_language_defn): Adjust.
* p-exp.y: Remove all yy symbol remappings.
(GDB_YY_REMAP_PREFIX): Define.
Include "yy-remap.h".
* p-lang.c (pascal_language_defn): Adjust.
* p-lang.h (pascal_error): Rename to ...
(pascal_yyerror): ... this.
* yy-remap.h: New file.
2016-04-22 Pedro Alves <palves@redhat.com>
* common/common-exceptions.h (GDB_XCPT_TRY): Remove mention of
the foreign frames issue.
[__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
2016-04-22 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (enum catcher_state, struct catcher)
(current_catcher): Define in C++ mode too.
(exceptions_state_mc_catch): Call throw_exception_sjlj instead of
throw_exception.
(throw_exception_sjlj, throw_exception_cxx): New functions,
factored out from throw_exception.
(throw_exception): Reimplement.
* common/common-exceptions.h (exceptions_state_mc_init)
(exceptions_state_mc_action_iter)
(exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
Declare in C++ mode too.
(TRY): Rename to ...
(TRY_SJLJ): ... this.
(CATCH): Rename to ...
(CATCH_SJLJ): ... this.
(END_CATCH): Rename to ...
(END_CATCH_SJLJ): ... this.
[GDB_XCPT == GDB_XCPT_SJMP] (TRY, CATCH, END_CATCH): Map to SJLJ
equivalents.
(throw_exception): Update comments.
(throw_exception_sjlj): Declare.
* event-top.c (gdb_rl_callback_read_char_wrapper): Extend intro
comment. Wrap body in TRY_SJLJ/CATCH_SJLJ and rethrow any
intercepted exception.
(gdb_rl_callback_handler): New function.
(gdb_rl_callback_handler_install): Always install
gdb_rl_callback_handler as readline callback.
2016-04-22 Pedro Alves <palves@redhat.com>
* event-top.c (rl_callback_read_char_wrapper): Rename to ...
(gdb_rl_callback_read_char_wrapper): ... this.
(change_line_handler, gdb_setup_readline): Adjust.
2016-04-22 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_supply): Clear CPSR
bits 20 to 23.
2016-04-22 Joel Brobecker <brobecker@adacore.com>
* MAINTAINER: Remove myself as AIX Maintainer.
2016-04-22 Maciej W. Rozycki <macro@imgtec.com>
* mips-tdep.c (mips_gdbarch_init): For GDB_OSABI_LINUX set
`num_regs' to 90 rather than 79. Where a target description is
present adjust the setting appropriately.
2016-04-21 Pedro Alves <palves@redhat.com>
* common/common-exceptions.h (GDB_XCPT_TRY): Add comment.
(GDB_XCPT): Always define as GDB_XCPT_SJMP.
2016-04-21 Pedro Alves <palves@redhat.com>
* aix-thread.c (pdc_read_data, pdc_write_data): Add cast.
(aix_thread_resume): Use PTRACE_TYPE_ARG5.
* rs6000-nat.c (rs6000_ptrace64): Use PTRACE_TYPE_ARG5.
(rs6000_ptrace_ldinfo): Change type of 'ldi' local to void
pointer, and cast return to gdb_byte pointer.
2016-04-21 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
void * instead of gdb_byte *.
2016-04-21 Pedro Alves <palves@redhat.com>
* dwarf2read.c (try_open_dwop_file, open_dwo_file)
(file_file_name, file_full_name): Add char * cast to sentinel in
concat/reconcat calls.
* event-top.c (top_level_prompt): Likewise.
* guile/guile.c (initialize_scheme_side): Likewise.
* linux-tdep.c (linux_fill_prpsinfo): Likewise.
* macrotab.c (macro_source_fullname): Likewise.
* main.c (get_init_files, captured_main): Likewise.
* psymtab.c (psymtab_to_fullname): Likewise.
* python/python.c (_initialize_python)
(gdbpy_finish_initialization): Likewise.
* source.c (symtab_to_fullname): Likewise.
2016-04-20 Pedro Alves <palves@redhat.com>
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes.
* configure: Renegerate.
2016-04-20 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_decode_message): Use gdb_signal_from_host.
2016-04-20 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_record_load_store): Change type of
'reg_rm_val' local to ULONGEST.
2016-04-20 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_resume_thread): Add uintptr_t cast.
2016-04-20 Doug Evans <xdje42@gmail.com>
* symmisc.c (dump_symtab_1): Print owning compunit for identical
blockvectors.
2016-04-20 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c: Include "arch/arm-linux.h".
2016-04-20 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
* arch/arm-linux.h: ... here.
2016-04-19 John Baldwin <jhb@FreeBSD.org>
* amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Change xstateregs
to void *.
(amd64bsd_store_inferior_registers): Likewise.
* fbsd-nat.c (resume_one_thread_cb): Explicitly cast data to ptid_t *.
(resume_all_threads_cb): Likewise.
* i386bsd-nat.c (i386bsd_supply_gregset): Cast gregs to char *.
(i386bsd_collect_gregset): Likewise.
(i386bsd_fetch_inferior_registers): Change xstateregs to void *.
(i386bsd_store_inferior_registers): Likewise.
2016-04-19 John Baldwin <jhb@FreeBSD.org>
* main.c (setup_alternate_signal_stack): Cast to char *.
2016-04-19 Doug Evans <xdje42@gmail.com>
* symmisc.c (dump_symtab_1, dump_symtab): Delete arg objfile.
All callers updated.
2016-04-19 Doug Evans <xdje42@gmail.com>
PR gdb/17911
* source.c (is_regular_file): New arg errno_ptr.
All callers updated.
2016-04-19 Andreas Arnez <arnez@linux.vnet.ibm.com>
* linux-record.c (record_linux_system_call): Merge handling for
readlink/recv/read and pipe/pipe2.
2016-04-14 Walfred Tedeschi <walfred.tedeschi@intel.com>
* features/i386/amd64-mpx-linux.xml: Remove AVX feature.
* features/i386/amd64-mpx.xml: Remove AVX feature.
* features/i386/i386-mpx-linux.xml: Remove AVX feature.
* features/i386/i386-mpx.xml: Remove AVX feature.
* features/i386/amd64-mpx-linux.c: Regenerate.
* features/i386/amd64-mpx.c: Regenerate.
* features/i386/i386-mpx-linux.c: Regenerate.
* features/i386/i386-mpx.c: Regenerate.
* regformats/i386/amd64-mpx-linux.dat: Regenerate.
* regformats/i386/amd64-mpx.dat: Regenerate.
* regformats/i386/i386-mpx-linux.dat: Regenerate.
* regformats/i386/i386-mpx.dat: Regenerate.
2016-04-16 Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
New include.
(amd64_linux_core_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
* amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
* amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
(amd64_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
* common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
(X86_XSTATE_AVX_MPX_MASK): New case.
* features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
(i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
(i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
(i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
New expedites.
* i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
include.
(i386_linux_core_read_description): Add case
X86_XSTATE_AVX_MPX_MASK.
(_initialize_i386_linux_tdep): Call
initialize_tdesc_i386_avx_mpx_linux.
* i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
* i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
(i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
* x86-linux-nat.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
* features/i386/amd64-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx-linux.c: Generated.
* features/i386/amd64-avx-mpx.c: Generated.
* features/i386/i386-avx-mpx-linux.c: Generated.
* features/i386/i386-avx-mpx.c: Generated.
* regformats/i386/amd64-avx-mpx-linux.dat: Generated.
* regformats/i386/amd64-avx-mpx.dat: Generated.
* regformats/i386/i386-avx-mpx-linux.dat: Generated.
* regformats/i386/i386-avx-mpx.dat: Generated.
2016-04-18 Pedro Alves <palves@redhat.com>
* ptrace.m4 (GDB_AC_PTRACE): Don't run tests in C++ mode.
* configure: Regenerate.
2016-04-18 Martin Galvan <martin.galvan@tallertechnologies.com>
* valops.c (value_addr): For C++ references, set the copied value's
enclosing_type as well.
2016-04-18 Yao Qi <yao.qi@linaro.org>
Revert:
2016-04-15 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
PC is far from the end of function.
2016-04-16 Pedro Alves <palves@redhat.com>
* ada-exp.y (yydefred): Define as ada_yydefred.
2016-04-15 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_lookup_struct_elt_type): Constify 'type_str' and
'name_str' locals.
2016-04-15 Pedro Alves <palves@redhat.com>
* btrace.c (pt_btrace_insn_flags): Change return type to
btrace_insn_flags. Use btrace_insn_flags for local.
2016-04-15 Pedro Alves <palves@redhat.com>
* nat/linux-ptrace.h [__mips__] (GDB_ARCH_IS_TRAP_BRKPT): Also
accept TRAP_BRKPT.
[__mips__] (GDB_ARCH_IS_TRAP_HWBKPT): Also accept TRAP_HWBKPT.
2016-04-15 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
PC is far from the end of function.
2016-04-14 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (alias_usage_error): New function.
(alias_command): Use it.
* ctf.c (ctf_save_metadata_header): Inline metadata_fmt local in
ctf_save_write_metadata call.
2016-04-14 Pedro Alves <palves@redhat.com>
* ada-typeprint.c (print_fixed_point_type): Don't pass float as
argument to function expecting LONGEST.
* value.c (unpack_long): Add casts to LONGEST.
2016-04-13 Luis Machado <lgustavo@codesourcery.com>
* exec.c (exec_file_locate_attach): Guard a couple functions
that can throw errors.
(exception_print_same): New helper function.
2016-04-13 Pedro Alves <palves@redhat.com>
PR remote/19840
* remote.c (struct remote_state) <last_resume_exec_dir>: New
field.
(new_remote_state): Default last_resume_exec_dir to EXEC_FORWARD.
(remote_open_1): Reset last_resume_exec_dir to EXEC_FORWARD.
(remote_resume): Store the last execution direction.
(remote_execution_direction): New function.
(init_remote_ops): Install it as to_execution_direction target_ops
method.
2016-04-12 Pedro Alves <palves@redhat.com>
* common/common-exceptions.h (GDB_XCPT_TRY): Update comment.
[__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.
2016-04-12 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <buf>: Now a
'jmp_buf' instead of SIGJMP_BUF.
(exceptions_state_mc_init): Change return type to 'jmp_buf'.
(throw_exception): Use longjmp instead of SIGLONGJMP.
* common/common-exceptions.h: Include <setjmp.h> instead of
"gdb_setjmp.h".
(exceptions_state_mc_init): Change return type to 'jmp_buf'.
[GDB_XCPT == GDB_XCPT_SJMP] (TRY): Use setjmp instead of
SIGSETJMP.
* cp-support.c: Include "gdb_setjmp.h".
2016-04-12 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (exception_rethrow): Remove
prepare_to_throw_exception call.
* common/common-exceptions.h (prepare_to_throw_exception): Delete
declaration.
* exceptions.c (prepare_to_throw_exception): Delete.
2016-04-12 Pedro Alves <palves@redhat.com>
* target.c (target_check_pending_interrupt): Delete.
* target.h (struct target_ops) <to_check_pending_interrupt>:
Remove method.
(target_check_pending_interrupt): Remove declaration.
* target-delegates.c: Regenerate.
2016-04-12 Pedro Alves <palves@redhat.com>
* defs.h: Update comments on SIGINT handling.
(immediate_quit): Delete declaration.
* event-loop.c (call_async_signal_handler): Delete.
* event-loop.h (call_async_signal_handler): Delete declaration.
(mark_async_signal_handler): Update comments.
(gdb_call_async_signal_handler): Delete declaration.
* event-top.c (handle_sigint): Call mark_async_signal_handler
instead of gdb_call_async_signal_handler.
* exceptions.c (prepare_to_throw_exception): Remove reference to
immediate_quit.
(exception_fprintf): Remove comments about immediate_quit.
* mingw-hdep.c (sigint_event, sigint_handler): Delete.
(gdb_select): Don't wait on sigint_event.
(gdb_call_async_signal_handler): Delete.
(_initialize_mingw_hdep): Delete.
* posix-hdep.c (gdb_call_async_signal_handler): Delete.
* utils.c (immediate_quit): Delete.
2016-04-12 Pedro Alves <palves@redhat.com>
* defs.h (quit_handler_ftype, quit_handler)
(make_cleanup_override_quit_handler, default_quit_handler): New.
(QUIT): Adjust comments.
* event-top.c (default_quit_handler): New function.
(quit_handler): New global.
(struct quit_handler_cleanup_data): New.
(restore_quit_handler, restore_quit_handler_dtor)
(make_cleanup_override_quit_handler): New.
(async_request_quit): Call QUIT.
* remote.c (struct remote_state) <got_ctrlc_during_io>: New field.
(async_sigint_remote_twice_token, async_sigint_remote_token):
Delete.
(remote_close): Update comments.
(remote_start_remote): Don't set immediate_quit. Set starting_up
earlier.
(remote_serial_quit_handler, remote_unpush_and_throw): New
functions.
(remote_open_1): Clear got_ctrlc_during_io. Set
remote_async_terminal_ours_p unconditionally.
(async_initialize_sigint_signal_handler)
(async_handle_remote_sigint, async_handle_remote_sigint_twice)
(remote_check_pending_interrupt, async_remote_interrupt)
(async_remote_interrupt_twice)
(async_cleanup_sigint_signal_handler, ofunc)
(sync_remote_interrupt, sync_remote_interrupt_twice): Delete.
(remote_terminal_inferior, remote_terminal_ours): Remove async
checks.
(remote_wait_as): Don't install a SIGINT handler in sync mode.
(readchar, remote_serial_write): Override the quit handler with
remote_serial_quit_handler.
(getpkt_or_notif_sane_1): Don't call QUIT.
(initialize_remote_ops): Don't install
remote_check_pending_interrupt.
(_initialize_remote): Don't create async_sigint_remote_token and
async_sigint_remote_twice_token.
* ser-base.c (ser_base_wait_for): Call QUIT and use
interruptible_select.
(ser_base_write): Call QUIT.
* ser-go32.c (dos_readchar, dos_write): Call QUIT.
* ser-unix.c (wait_for): Don't use VTIME. Always take the
gdb_select path, but call QUIT and interruptible_select.
* utils.c (maybe_quit): Call the current quit handler. Don't call
target_check_pending_interrupt.
(defaulted_query, prompt_for_continue): Override the quit handler
with the default quit handler.
2016-04-12 Pedro Alves <palves@redhat.com>
* tui/tui-hooks.c (tui_target_has_run): Delete.
(tui_about_to_proceed): Delete.
(tui_about_to_proceed_observer): Delete.
(tui_install_hooks, tui_remove_hooks): Don't install/remove an
about_to_proceed observer.
2016-04-12 Pedro Alves <palves@redhat.com>
* mi/mi-interp.c (mi_new_thread): Put
target_terminal_ours_for_output in effect while outputting.
(mi_thread_exit): Use target_terminal_ours_for_output instead of
target_terminal_ours.
(mi_record_changed, mi_inferior_added, mi_inferior_appeared)
(mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
(mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
(mi_breakpoint_created, mi_breakpoint_deleted)
(mi_breakpoint_modified, mi_solib_loaded, mi_solib_unloaded)
(mi_command_param_changed, mi_memory_changed)
(report_initial_inferior): Use target_terminal_ours_for_output
instead of target_terminal_ours. Restore terminal settings.
* mi/mi-main.c (mi_execute_command): Use
target_terminal_ours_for_output instead of target_terminal_ours.
Restore terminal settings.
2016-04-12 Pedro Alves <palves@redhat.com>
PR gdb/19828
* gnu-nat.c (inf_validate_task_sc): Don't call
target_terminal_ours / target_terminal_inferior around query.
* i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
call target_terminal_ours / target_terminal_inferior around
yquery.
* linux-record.c (record_linux_system_call): Don't call
target_terminal_ours / target_terminal_inferior around yquery.
* nto-procfs.c (interrupt_query): Don't call target_terminal_ours
/ target_terminal_inferior around query.
* record-full.c (record_full_check_insn_num): Remove
'set_terminal' parameter. Don't call target_terminal_ours /
target_terminal_inferior around query.
(record_full_message, record_full_registers_change)
(record_full_xfer_partial): Adjust.
* remote.c (interrupt_query): Don't call target_terminal_ours /
target_terminal_inferior around query.
* utils.c (defaulted_query): Install cleanup to restore target
terminal. Put target_terminal_ours_for_output in effect while
defaulted producing, and target_terminal_ours in in effect while
handling input.
(prompt_for_continue): Install cleanup to restore target terminal.
Put target_terminal_ours in in effect while handling input.
2016-04-12 Pedro Alves <palves@redhat.com>
* utils.c (defaulted_query, prompt_for_continue): Free temporary
strings with cleanups, instead of xfree.
2016-04-12 Pedro Alves <palves@redhat.com>
* utils.c (vwarning, internal_vproblem): Use
make_cleanup_restore_target_terminal and
target_terminal_ours_for_output.
2016-04-12 Pedro Alves <palves@redhat.com>
* infcmd.c (post_create_inferior, prepare_one_step): Use
target_terminal_ours_for_output instead of target_terminal_ours.
2016-04-12 Pedro Alves <palves@redhat.com>
* exceptions.c (print_flush): Use target_terminal_ours_for_output
instead of target_terminal_ours, and restore target terminal with
a cleanup.
2016-04-12 Pedro Alves <palves@redhat.com>
* cp-support.c (gdb_demangle): Use target_terminal_ours_for_output
instead of target_terminal_ours, and restore target terminal with
a cleanup.
2016-04-12 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string, type_as_string_and_cleanup): New
functions.
(ada_lookup_struct_elt_type): Use type_as_string_and_cleanup.
2016-04-12 Pedro Alves <palves@redhat.com>
* ser-base.c (fd_event): Retry read_prim on EINTR.
(do_ser_base_readchar): Retry read_prim on EINTR.
(ser_base_write): Retry write_prim on EINTR.
* ser-unix.c (ser_unix_read_prim): Don't retry on EINTR here.
(ser_unix_write_prim): Remove comment.
2016-04-12 Pedro Alves <palves@redhat.com>
* remote.c (remote_pass_ctrlc): New function.
(init_remote_ops): Install it.
* target.c (target_terminal_inferior): Pass pending Ctrl-C to the
target.
(target_pass_ctrlc, default_target_pass_ctrlc): New functions.
* target.h (struct target_ops) <to_pass_ctrlc>: New method.
(target_pass_ctrlc, default_target_pass_ctrlc): New declarations.
* target-delegates.c: Regenerate.
2016-04-12 Pedro Alves <palves@redhat.com>
* infcmd.c (interrupt_target_1): Call target_stop is in non-stop
mode.
* linux-nat.c (linux_nat_interrupt): Delete.
(linux_nat_add_target): Don't install linux_nat_interrupt.
* remote.c (remote_interrupt_ns): Change return type to void.
Throw error if interrupting the target is not supported.
(remote_interrupt): Don't call the remote_stop_ns/remote_stop_as.
2016-04-12 Pedro Alves <palves@redhat.com>
* defs.h (clear_quit_flag): Remove declaration.
* extension-priv.h (struct extension_language_ops)
<clear_quit_flag>: Remove field and update comments.
* extension.c (clear_quit_flag): Delete.
* guile/guile.c (guile_extension_ops): Adjust.
* python/python.c (python_extension_ops): Adjust.
(gdbpy_clear_quit_flag): Delete.
2016-04-12 Pedro Alves <palves@redhat.com>
* main.c (captured_main): Don't clear the quit flag.
2016-04-12 Pedro Alves <palves@redhat.com>
* exceptions.c (prepare_to_throw_exception): Don't clear the quit
flag.
2016-04-12 Pedro Alves <palves@redhat.com>
* event-top.c (command_handler): Don't call clear_quit_flag.
2016-04-12 Pedro Alves <palves@redhat.com>
* remote-sim.c (gdb_os_poll_quit): Don't call clear_quit_flag.
* remote.c (remote_wait_as): Don't call clear_quit_flag.
2016-04-12 Pedro Alves <palves@redhat.com>
* python/python.c: Include "ser-event.h".
(gdbpy_event_fds): Delete.
(gdbpy_serial_event): New.
(gdbpy_run_events): Change prototype. Use serial_event_clear
instead of serial_readchar.
(gdbpy_post_event): Use serial_event_set instead of serial_write.
(gdbpy_initialize_events): Use make_serial_event instead of
serial_pipe.
2016-04-12 Pedro Alves <palves@redhat.com>
* defs.h: Extend QUIT-related comments to mention
interruptible_select.
(quit_serial_event_set, quit_serial_event_clear): Declare.
* event-top.c: Include "ser-event.h" and "gdb_select.h".
(quit_serial_event): New global.
(async_init_signals): Make quit_serial_event.
(quit_serial_event_set, quit_serial_event_clear)
(quit_serial_event_fd, interruptible_select): New functions.
* extension.c (set_quit_flag): Set the quit serial event.
(check_quit_flag): Clear the quit serial event.
* gdb_select.h (interruptible_select): New declaration.
* guile/scm-ports.c (ioscm_input_waiting): Use
interruptible_select instead of gdb_select.
* top.c (gdb_readline_no_editing): Likewise.
* ui-file.c (stdio_file_read): Likewise.
2016-04-12 Pedro Alves <palves@redhat.com>
* event-loop.c: Include "ser-event.h".
(async_signal_handlers_serial_event): New global.
(async_signals_handler, initialize_async_signal_handlers): New
functions.
(mark_async_signal_handler): Set
async_signal_handlers_serial_event.
(invoke_async_signal_handlers): Clear
async_signal_handlers_serial_event.
* event-top.c (async_init_signals): Call
initialize_async_signal_handlers.
2016-04-12 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add ser-event.c.
(HFILES_NO_SRCDIR): Add ser-event.h.
(COMMON_OBS): Add ser-event.o.
* ser-event.c, ser-event.h: New files.
* serial.c (new_serial): New function, factored out from
(serial_fdopen_ops): ... this.
(serial_open_ops_1): New function, factored out from
(serial_open): ... this.
(serial_open_ops): New function.
* serial.h (struct serial): Forware declare.
(serial_open_ops): New declaration.
2016-04-12 Pedro Alves <palves@redhat.com>
* serial.c (serial_open, serial_fdopen_ops, do_serial_close):
Remove references to name.
* serial.h (struct serial) <name>: Delete.
2016-04-12 Pedro Alves <palves@redhat.com>
* remote-fileio.c (sigint_fileio_token, remote_fio_no_longjmp):
Delete.
(async_remote_fileio_interrupt): Delete.
(remote_fileio_ctrl_c_signal_handler): Don't call the async signal
handler. Instead just always set the ctrl_c flag.
(remote_fileio_reply): Clear remote_fio_ctrl_c_flag before
re-enabling the SIGINT handler.
(remote_fileio_func_open, remote_fileio_func_close)
(remote_fileio_func_read, remote_fileio_func_write)
(remote_fileio_func_lseek, remote_fileio_func_rename)
(remote_fileio_func_unlink, remote_fileio_func_stat)
(remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
(remote_fileio_func_isatty, remote_fileio_func_system)
(remote_fileio_request): Remove references to
remote_fio_no_longjmp.
(initialize_remote_fileio): Don't create an async signal handler.
2016-04-12 Pedro Alves <palves@redhat.com>
* event-top.c (stdin_event_handler): Call QUIT;
(prompt_for_continue): Don't run with immediate_quit set.
2016-04-12 Pedro Alves <palves@redhat.com>
* tui/tui-io.c (tui_redisplay_readline): Check
gdb_in_secondary_prompt_p instead of immediate_quit.
* tui/tui.c: Include top.h.
(tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
immediate_quit.
2016-04-12 Pedro Alves <palves@redhat.com>
* top.c (read_command_file): Inline command_loop here.
(command_loop): Delete.
2016-04-12 Pedro Alves <palves@redhat.com>
* top.c: Include "gdb_select.h".
(gdb_readline_no_editing): Wait for input with gdb_select instead
of blocking in fgetc.
(command_line_input): Don't set immediate_quit.
2016-04-08 Martin Galvan <martin.galvan@tallertechnologies.com>
* value.c (value_next): Make pass-by-reference parameters const-correct.
(value_parent): Likewise.
(value_enclosing_type): Likewise.
(value_lazy): Likewise.
(value_stack): Likewise.
(value_embedded_offset): Likewise.
(value_pointed_to_offset): Likewise.
(value_raw_address): Likewise.
(deprecated_value_modifiable): Likewise.
(value_free_to_mark): Likewise.
(value_release_to_mark): Likewise.
(internalvar_name): Likewise.
(readjust_indirect_value_type): Likewise.
(value_initialized): Likewise.
* value.h (value_next): Likewise.
(value_parent): Likewise.
(value_enclosing_type): Likewise.
(value_lazy): Likewise.
(value_stack): Likewise.
(value_embedded_offset): Likewise.
(value_pointed_to_offset): Likewise.
(value_raw_address): Likewise.
(deprecated_value_modifiable): Likewise.
(value_free_to_mark): Likewise.
(value_release_to_mark): Likewise.
(internalvar_name): Likewise.
(readjust_indirect_value_type): Likewise.
(value_initialized): Likewise.
2016-04-07 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Return
early if entry on the address is found in
record_full_breakpoints.
2016-04-07 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Set
bp_tgt->reqstd_address and bp_tgt->placed_size.
2016-04-06 Don Breazeal <donb@codesourcery.com>
* value.c (value_actual_type): Don't try to get rtti type
of the value if it has been optimized out.
(value_optimized_out): If a memory access error occurs,
just check vaue->optimized_out.
2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Revert the previous commit adding unknown_v_replies_ok.
2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
* remote.c (struct remote_state): New field unknown_v_replies_ok.
(packet_config_support): Read it.
(remote_start_remote): Set it.
2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
* remote.c: Revert check-in by a mistake in the previous commit.
2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* exec.c (exec_file_locate_attach): Print warning for unsupported
target_pid_to_exec_file.
* symfile-mem.c (add_vsyscall_page): Remove the "file" command
message part.
2016-04-04 Simon Marchi <simon.marchi@ericsson.com>
* cli/cli-decode.c (help_cmd_list): Fix function doc and remove
trailing spaces.
2016-04-01 Artemiy Volkov <artemiyv@acm.org>
PR gdb/19820
* eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
the type of BINOP_REPEAT's second operand.
2016-03-31 Yichao Yu <yyc1992@gmail.com>
PR gdb/19858
* jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
got the breakpoint at the right address.
(jit_inferior_created): New function.
(_initialize_jit): Install jit_inferior_created as
inferior_created observer.
2016-03-31 Marcin Kościelnicki <koriakin@0x04.net>
* NEWS: Mention support for tracepoints on powerpc*-linux.
2016-03-31 Catalin Udma <catalin.udma@freescale.com>
PR python/19743
* python/python.c (execute_gdb_command): Use console uiout
when executing gdb command.
* utils.c (restore_ui_out_closure): New structure.
(do_restore_ui_out): New function.
(make_cleanup_restore_ui_out): Likewise.
* utils.h (make_cleanup_restore_ui_out): Declare.
2016-03-31 Pedro Alves <palves@redhat.com>
* NEWS: Mention that support for "target m32rsdi", "target mips",
"target pmon", "target ddb", "target rockhopper", and "target lsi"
was removed.
* Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
remote-mips.o.
(ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
* configure.tgt: Remove all references to remote-m32r-sdi.o and
remote-mips.o.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
function.
* mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
declaration.
* remote-m32r-sdi.c, remote-mips.c: Delete files.
* symfile.c (generic_load, generic_load): Remove comments.
2016-03-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against
0 rather than NULL.
2016-03-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: (arm_make_epilogue_frame_cache): New function.
(arm_epilogue_frame_this_id): New function.
(arm_epilogue_frame_prev_register): New function.
(arm_epilogue_frame_sniffer): New function.
(arm_epilogue_frame_unwind): New.
(arm_gdbarch_init): Append unwinder arm_epilogue_frame_unwind.
2016-03-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_stack_frame_destroyed_p): Rename it ...
(arm_stack_frame_destroyed_p_1): ... here. Don't call
arm_pc_is_thumb.
(arm_stack_frame_destroyed_p): Call
thumb_stack_frame_destroyed_p and
arm_stack_frame_destroyed_p_1.
2016-03-30 Doug Evans <dje@google.com>
* python/py-utils.c (host_string_to_python_string): New function.
* python/python-internal.h (host_string_to_python_string): Declare it.
* python/py-*.c (*): Update all calls to
PyString_Decode (str, strlen (str), host_charset (), NULL);
to use host_string_to_python_string instead.
2016-03-30 Marcin Kościelnicki <koriakin@0x04.net>
* remote.c (remote_check_symbols): Allocate own buffer for reply.
2016-03-29 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-tdep.c (xtensa_frame_cache): Change op1 type to LONGEST.
Use safe_read_memory_integer instead of read_memory_integer.
2016-03-29 Marcin Kościelnicki <koriakin@0x04.net>
* NEWS: Mention support for tracepoints on s390*-linux.
2016-03-29 Don Breazeal <donb@codesourcery.com>
* value.c (value_actual_type): Fix formatting issue.
2016-03-23 Yao Qi <yao.qi@linaro.org>
* gdbarch.sh (software_single_step): Remove comments.
* gdbarch.h: Regenerated.
2016-03-21 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_media): New.
(arm_record_ld_st_reg_offset): Call arm_record_media.
2016-03-21 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_canonicalize_syscall): Canonicalize
more syscalls.
2016-03-18 Yao Qi <yao.qi@linaro.org>
* sparc-tdep.c (sparc_software_single_step): Make it static.
* sparc-tdep.h (sparc_software_single_step): Remove declaration.
2016-03-18 Yao Qi <yao.qi@linaro.org>
* spu-tdep.c (spu_software_single_step): Throw error when
target_read_memory fails.
2016-03-17 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-thread-db.c (check_pid_namespace_match): Extend the message.
2016-03-17 Pedro Alves <palves@redhat.com>
Don Breazeal <donb@codesourcery.com>
PR remote/19496
* infcmd.c (notice_new_inferior): Use the 'leave_running' argument
instead of checking the 'non_stop' global.
* remote.c (remote_add_thread): New parameter 'executing'. Use it
to set the new thread's executing state.
(remote_notice_new_inferior): Rename parameter 'running' to
'executing'. Always set the thread state to THREAD_RUNNING in
non-stop mode, and to THREAD_STOPPED in all-stop mode. Pass
EXECUTING to remote_add_thread and notice_new_inferior.
(remote_update_thread_list): Update to pass executing state, not
running state.
2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
* syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
to 374.
* syscalls/s390x-linux.xml: Likewise.
2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
* linux-record.c (record_mem_at_reg): New helper function.
(record_linux_system_call): Exploit new helper function where
applicable.
2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
* linux-record.c: Fix whitespace issues; tabify, remove trailing
spaces.
2016-03-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
* linux-record.c (record_linux_system_call): Add missing return
statements to handling of pipe and pipe2 syscalls.
2016-03-16 Doug Evans <dje@google.com>
* xml-tdesc.c (tdesc_start_enum): Fix c++ build.
2016-03-16 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_init_abi): Fix
arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
arm_linux_record_tdep.arg3. Set arm_linux_record_tdep.arg4,
arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
arm_linux_record_tdep.arg7.
2016-03-15 Keith Seitz <keiths@redhat.com>
PR breakpoints/18303
* cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
look for "::" instead of simply ":".
(cp_search_static_and_baseclasses): Return null_block_symbol for
malformed input.
Remove assertions.
* cp-support.c (cp_find_first_component_aux): Do not return
a prefix length for ':' unless the next character is also ':'.
2016-03-15 Doug Evans <dje@google.com>
* features/aarch64-core.xml (cpsr_flags): New flags type.
(cpsr): Use it.
* features/aarch64.c: Regenerate.
2016-03-15 Doug Evans <dje@google.com>
* features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
* features/i386/32bit-sse.xml (i386_eflags): Ditto.
* features/i386/64bit-core.xml (i386_eflags): Ditto.
* features/i386/64bit-sse.xml (i386_eflags): Ditto.
* features/i386/x32-core.xml (i386_eflags): Ditto.
2016-03-15 Doug Evans <dje@google.com>
Wei-cheng Wang <cole945@gmail.com>
Extend flags to support multibit and enum bitfields.
* NEWS: Document new features.
* c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
(c_type_print_varspec_suffix, c_type_print_base): Ditto.
* gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
(append_flags_type_field): New function.
(append_flags_type_flag): Call it.
* gdbtypes.h (append_flags_type_field): Declare.
* target-descriptions.c (struct tdesc_type_flag): Delete.
(enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
(enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
(struct tdesc_type) <u.f>: Delete.
(tdesc_predefined_types): Add "bool".
(tdesc_predefined_type): New function.
(tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
Update TDESC_TYPE_FLAGS support.
(tdesc_free_type): Handle TDESC_TYPE_ENUM. Update TDESC_TYPE_FLAGS.
(tdesc_create_flags): Update.
(tdesc_create_enum): New function.
(tdesc_add_field): Initialize start,end to -1.
(tdesc_add_typed_bitfield): New function.
(tdesc_add_bitfield): Call it.
(tdesc_add_flag): Allow TDESC_TYPE_STRUCT. Update.
(tdesc_add_enum_value): New function.
(maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
TDESC_TYPE_STRUCT. Handle TDESC_TYPE_ENUM.
* target-descriptions.h (tdesc_create_enum): Declare.
(tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
* valprint.c (generic_val_print_enum_1): New function.
(generic_val_print_enum): Call it.
(val_print_type_code_flags): Make static. Handle multibit bitfields
and enum bitfields.
* valprint.h (val_print_type_code_flags): Delete.
* xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
Delete. All uses removed.
(tdesc_start_enum): New function.
(tdesc_start_field): Handle multibit and enum bitfields.
(tdesc_start_enum_value): New function.
(enum_value_attributes, enum_children, enum_attributes): New static
globals.
(feature_children): Add "enum".
* features/gdb-target.dtd (enum, evalue): New elements.
2016-03-15 Doug Evans <dje@google.com>
* target-descriptions.c (struct tdesc_type) <u.u.size>: Change type
from LONGEST to int.
(struct tdesc_type) <u.f.size>: Ditto.
(tdesc_set_struct_size): Change type of "size" arg from LONGEST
to int. Add assertion size > 0.
(tdesc_create_flags): Ditto.
* target-descriptions.h (tdesc_set_struct_size): Update.
(tdesc_create_flags): Update.
* xml-tdesc.c (MAX_FIELD_SIZE, MAX_FIELD_BITSIZE): New macros.
(MAX_VECTOR_SIZE): New macro.
(tdesc_start_struct): Catch conversion errors from LONGEST to int.
(tdesc_start_flags, tdesc_start_field, tdesc_start_vector): Ditto.
2016-03-15 Doug Evans <dje@google.com>
* target-descriptions.c (maint_print_c_tdesc_cmd): Use "type" for
TYPE_CODE_FLAGS instead of "field_type", for consistency.
* features/i386/amd64-avx-linux.c: Regenerate.
* features/i386/amd64-avx.c: Regenerate.
* features/i386/amd64-avx512-linux.c: Regenerate.
* features/i386/amd64-avx512.c: Regenerate.
* features/i386/amd64-linux.c: Regenerate.
* features/i386/amd64-mpx-linux.c: Regenerate.
* features/i386/amd64-mpx.c: Regenerate.
* features/i386/amd64.c: Regenerate.
* features/i386/i386-avx-linux.c: Regenerate.
* features/i386/i386-avx.c: Regenerate.
* features/i386/i386-avx512-linux.c: Regenerate.
* features/i386/i386-avx512.c: Regenerate.
* features/i386/i386-linux.c: Regenerate.
* features/i386/i386-mmx-linux.c: Regenerate.
* features/i386/i386-mmx.c: Regenerate.
* features/i386/i386-mpx-linux.c: Regenerate.
* features/i386/i386-mpx.c: Regenerate.
* features/i386/i386.c: Regenerate.
* features/i386/x32-avx-linux.c: Regenerate.
* features/i386/x32-avx.c: Regenerate.
* features/i386/x32-avx512-linux.c: Regenerate.
* features/i386/x32-avx512.c: Regenerate.
* features/i386/x32-linux.c: Regenerate.
* features/i386/x32.c: Regenerate.
2016-03-15 Pedro Alves <palves@redhat.com>
PR gdb/19676
* linux-thread-db.c (try_thread_db_load_1): Leave
info->td_ta_thr_iter_p NULL iff debugging a live process and we
have /proc access.
(find_new_threads_once): Assert that we have a non-NULL
info->td_ta_thr_iter_p instead of checking whether the target has
execution.
2016-03-15 Pedro Alves <palves@redhat.com>
PR gdb/19676
* infrun.c (displaced_step_prepare): Also disable displaced
stepping on NOT_SUPPORTED_ERROR.
* linux-tdep.c (linux_displaced_step_location): If reading auxv
fails, throw NOT_SUPPORTED_ERROR instead of generic error.
2016-03-13 Marcin Kościelnicki <koriakin@0x04.net>
* s390-linux-tdep.c (s390_gen_return_address): New function.
(s390_gdbarch_init): Fill gen_return_address hook.
2016-03-11 Andrew Burgess <andrew.burgess@embecosm.com>
* symmisc.c (maintenance_info_line_tables): New function.
(maintenance_print_one_line_table): New function.
(_initialize_symmisc): Register 'maint info line-table' command.
* NEWS: Mention new command.
2016-03-11 Marcin Kościelnicki <koriakin@0x04.net>
* s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
(s390_ax_pseudo_register_push_stack): New function.
(s390_gdbarch_init): Fill ax_pseudo_register_collect and
ax_pseudo_register_push_stack hooks.
2016-03-10 Simon Marchi <simon.marchi@polymtl.ca>
* data-directory/Makefile.in (PYTHON_FILE_LIST): Install
gdb/function/as_string.py.
* python/lib/gdb/function/as_string.py: New file.
* NEWS: Mention the new $_as_string function.
2016-03-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* target.h: Fix doc string of target_can_use_hardware_watchpoint.
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (more_to_come): Delete.
(struct readline_input_state): Delete.
(readline_input_state): Delete.
(get_command_line_buffer): New function.
(command_handler): Update comments. Don't handle NULL commands
here. Do not execute commented lines.
(command_line_append_input_line): New function.
(handle_line_of_input): New function, partly based on
command_line_handler and command_line_input.
(command_line_handler): Rewrite.
* event-top.h (command_handler): New declaration.
(command_loop): Defer command execution to command_handler.
(command_line_input): Update comments. Simplify, using struct
buffer and handle_line_of_input.
* top.h (struct buffer): New forward declaration.
(handle_line_of_input): New declaration.
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (command_line_handler): Use xfree + xstrdup instead
of xrealloc + strcpy.
* main.c (captured_main): Use xstrdup instead of xmalloc plus
manual clear.
* top.c (saved_command_line): Rewrite comment.
(saved_command_line_size): Delete.
(command_line_input): Use xfree + xstrdup instead of xrealloc +
strcpy.
* top.h (saved_command_line_size): Delete declaration.
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c: Include buffer.h.
(gdb_readline_no_editing_callback): Use struct buffer instead
of xrealloc.
2016-03-09 Pedro Alves <palves@redhat.com>
* common/buffer.h (buffer_grow_char): New function.
* top.c: Include buffer.h.
(gdb_readline_no_editing): Rename 'prompt_arg' parameter to
'prompt'. Use struct buffer instead of xrealloc.
2016-03-09 Pedro Alves <palves@redhat.com>
* defs.h (gdb_readline): Delete declaration.
* top.c (gdb_readline): Rename to ...
(gdb_readline_no_editing): ... this, and make static.
2016-03-09 Pedro Alves <palves@redhat.com>
* utils.c (prompt_for_continue): Update comments.
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (async_annotation_suffix): Delete.
(top_level_prompt, command_line_handler): Don't use
'async_annotation_suffix' and simplify.
* event-top.h (async_annotation_suffix): Delete declaration.
(init_main): Remove reference to 'async_annotation_suffix'.
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (gdb_readline2): Rename to ...
(gdb_readline_no_editing_callback): ... this.
(change_line_handler, stdin_event_handler)
(gdb_setup_readline): Adjust.
* event-top.h (gdb_readline2): Rename to ...
(gdb_readline_no_editing_callback): ... this, and move closer to
other readline-related declarations.
* mi/mi-interp.c (mi_interpreter_resume): Adjust.
2016-03-09 Pedro Alves <palves@redhat.com>
* top.c (window_hook): Delete.
(command_loop): Remove references to window_hook.
2016-03-09 Marcin Kościelnicki <koriakin@0x04.net>
* corefile.c (safe_read_memory_unsigned_integer): New function.
* gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
* rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.
2016-03-09 Marcin Kościelnicki <koriakin@0x04.net>
* rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
(rs6000_gen_return_address): New function.
(rs6000_gdbarch_init): Wire in the above.
2016-03-09 Marcin Kościelnicki <koriakin@0x04.net>
* rs6000-tdep.c (rs6000_ax_pseudo_register_collect): New function.
(rs6000_gdbarch_init): Wire in the above.
2016-03-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-linux-tdep.c (s390_analyze_prologue): Ignore BRC and BRCL
instructions that do nothing or are conditional traps.
2016-03-09 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-linux-tdep.c (s390_prologue_frame_unwind_cache): Store
frame func's PC in info->func before any other failure can occur.
(s390_frame_this_id): Use frame_id_build_unavailable_stack if
info->func has been filled out.
2016-03-09 Pedro Alves <palves@redhat.com>
* osabi.c (gdb_osabi_names): Avoid spaces in osabi names.
2016-03-09 Pedro Alves <palves@redhat.com>
* frv-tdep.c (frv_gdbarch_init): Handle bfd_mach_fr300.
2016-03-09 Pedro Alves <palves@redhat.com>
* cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
order is BFD_ENDIAN_BIG or if the cris version is unsupported.
2016-03-09 Pedro Alves <palves@redhat.com>
* doublest.c: Extend comments.
(floatformat_to_doublest, floatformat_from_doublest): Copy the
floatformat's total size, not the host type's size.
2016-03-09 Pedro Alves <palves@redhat.com>
* doublest.c (floatformat_totalsize_bytes): New function.
(floatformat_from_type): Assert that the type's length is at least
as long as the floatformat's totalsize.
* doublest.h (floatformat_totalsize_bytes): New declaration.
* gdbtypes.c (arch_float_type): Assert that the type's length is
at least as long as the floatformat's totalsize.
2016-03-09 Pedro Alves <palves@redhat.com>
* hppa-linux-tdep.c (hppa_linux_init_abi): Set the long double
format to floatformats_ieee_double.
2016-03-07 Pedro Alves <palves@redhat.com>
* mips-tdep.c (mips_gdbarch_init): Check whether info.abfd is NULL
before calling bfd_get_flavour.
2016-03-05 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* avr-tdep.c (AVR_LAST_ARG_REGNUM): Define.
(avr_push_dummy_call): Correct last needed argument register.
Write MSB of argument into register and subsequent bytes into
other registers in decreasing order.
2016-03-04 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_vdata_transfer_insn): Simplify the
condition check. Record the right D register number.
2016-03-04 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_extension_space): Remove code
printing "Process record does not support".
(arm_record_data_proc_misc_ld_str): Likewise.
(decode_insn): Call arm_record_extension_space if condition
is 0xf. Call arm_record_unsupported_insn if ret isn't
ARM_RECORD_SUCCESS. Use 'ret' instead of 'insn_id' to hold
the value of thumb2_record_decode_insn_handler.
2016-03-04 Simon Marchi <simon.marchi@ericsson.com>
* features/feature_to_c.sh: Print the help when passing no
argument.
2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
* MAINTAINERS (Write After Approval): Add Bernhard Heckel.
2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
* dwarf2read.c (new_symbol_full): Fix detection of gfortran compilers.
2016-03-01 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-linux-tdep.c (s390_backchain_frame_unwind_cache): Avoid
exception when attempting to access the inferior's backchain.
2016-02-29 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (aarch64_canonicalize_syscall): Support
eventfd2, eventfd2, dup3, inotify_init1, fallocate and pipe2.
Return gdb_sys_epoll_create1 instead of gdb_sys_epoll_create
for aarch64_sys_epoll_create1.
2016-02-29 Yao Qi <yao.qi@linaro.org>
* linux-record.h (enum gdb_syscall) <gdb_sys_fallocate>: New.
<gdb_sys_eventfd2, gdb_sys_epoll_create1, gdb_sys_dup3>: New.
<gdb_sys_pipe2, gdb_sys_inotify_init1>: New.
* linux-record.c (record_linux_system_call): Handle them.
2016-02-28 Iain Buclaw <ibuclaw@gdcproject.org>
* d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
cyclic imports.
2016-02-26 Keith Seitz <keiths@redhat.com>
* rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
to avoid invalid conversion from void *.
2016-02-26 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
per bit 8. Check bit 20 instead of bit 4 for VMOV
instruction. Record D registers for instructions changing
S registers. Change of the order of length and address
in record_buf_mem array.
2016-02-26 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
number of Rd.
2016-02-25 Doug Evans <dje@google.com>
* remote-m32r-sdi.c (recv_char_data): Initialize val to avoid
compiler warning.
(recv_long_data): Ditto.
2016-02-25 Simon Marchi <simon.marchi@ericsson.com>
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
Initialize variables.
2016-02-25 Antoine Tremblay <antoine.tremblay@ericsson.com>
* ax-general.c (ax_reg): Call gdbarch_remote_register_number.
(ax_reg_mask): Likewise.
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-nat.c (save_sigtrap) Delete.
(stop_wait_callback): Call save_stop_reason instead of
save_sigtrap.
(check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Bits of save_sigtrap folded here.
Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out
common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_nat_filter_event): Call save_stop_reason instead of
save_sigtrap.
* nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
si_code for MIPS.
* nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add
comments on MIPS behavior.
(GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
2016-02-24 Marcin Kościelnicki <koriakin@0x04.net>
* rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0
to avoid spurious warnings.
2016-02-24 Gary Benson <gbenson@redhat.com>
* exec.c (exec_file_locate_attach): Do not attempt to
locate main executable locally if not found in sysroot.
2016-02-24 Joel Brobecker <brobecker@adacore.com>
GDB 7.11 released.
2016-02-24 Wei-cheng Wang <cole945@gmail.com>
* rs6000-tdep.c (rs6000_frame_cache, rs6000_frame_this_id): Handle
unavailable PC/SP to build unavailable frame.
2016-02-23 Doug Evans <dje@google.com>
Extend "skip" command to support -file, -gfile, -function, -rfunction.
* NEWS: Document new features.
* skip.c: #include "fnmatch.h", "gdb_regex.h".
(skiplist_entry) <file>: Renamed from filename.
<function>: Renamed from function_name.
<file_is_glob, function_is_regexp>: New members.
<compiled_function_regexp, compiled_function_regexp_is_valid>:
New members.
(make_skip_entry): New function.
(free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
(make_free_skiplist_entry_cleanup): New function.
(skip_file_command): Update.
(skip_function, skip_function_command): Update.
(compile_skip_regexp): New functions.
(skip_command): Add support for new options.
(skip_info): Update.
(skip_file_p, skip_gfile_p): New functions.
(skip_function_p, skip_rfunction_p): New functions.
(function_name_is_marked_for_skip): Update and simplify.
(_initialize_step_skip): Update.
* symtab.c: #include "fnmatch.h".
(compare_glob_filenames_for_search): New function.
* symtab.h (compare_glob_filenames_for_search): Declare.
* utils.c (count_path_elements): New function.
(strip_leading_path_elements): New function.
* utils.h (count_path_elements): Declare.
(strip_leading_path_elements): Declare.
2016-02-23 Simon Marchi <simon.marchi@ericsson.com>
* arm-tdep.c (arm_decode_svc_copro): Remove "to" parameter.
(thumb_process_displaced_insn): Likewise.
(arm_process_displaced_insn): Adjust calls.
2016-02-23 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
Remove.
<aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
<aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
<aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
<aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
<aarch64_sys_linkat, aarch64_sys_renameat>: New.
<aarch64_sys_faccessat>: New.
<aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
<aarch64_sys_openat, aarch64_sys_readlinkat>: New.
<aarch64_sys_newfstatat>: New.
(UNSUPPORTED_SYSCALL_MAP): New macro.
(aarch64_canonicalize_syscall): Add missing syscalls.
2016-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.
2016-02-22 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Fix code format issues.
2016-02-21 Iain Buclaw <ibuclaw@gdcproject.org>
* d-namespace.c (d_lookup_symbol_imports): Remove argument
'search_parents'. All callers updated.
2016-02-18 Marcin Kościelnicki <koriakin@0x04.net>
* s390-linux-tdep.c (s390_guess_tracepoint_registers): New function.
(s390_gdbarch_init): Fill guess_tracepoint_registers hook.
2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
* NEWS: Add entry for bound violation.
* amd64-linux-tdep.c (amd64_linux_init_abi_common):
Add handler for segmentation fault.
* gdbarch.sh (handle_segmentation_fault): New.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
(SIG_CODE_BONDARY_FAULT): New define.
(i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
* i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* infrun.c (handle_segmentation_fault): New function.
(print_signal_received_reason): Use handle_segmentation_fault.
2016-02-18 Marcin Kościelnicki <koriakin@0x04.net>
* arch-utils.c (default_guess_tracepoint_registers): New function.
* arch-utils.h (default_guess_tracepoint_registers): New prototype.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh: Add guess_tracepoint_registers hook.
* tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.
2016-02-17 Gary Benson <gbenson@redhat.com>
* exec.c (exec_file_locate_attach): Add missing cleanup.
2016-02-16 Don Breazeal <donb@codesourcery.com>
PR remote/19496
* remote.c (remove_new_fork_children): Check for pending
fork status in thread_info.suspend.
2016-02-16 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_software_single_step): Assign
'old_chain' later.
2016-02-16 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
<syscall_next_pc>: Remove argument PC. Callers updated.
* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
Remove argument PC. Get pc from regcache_read_pc.
* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
argument PC.
2016-02-15 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".
2016-02-12 Yao Qi <yao.qi@linaro.org>
* arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate
nextpc according to instruction.
2016-02-12 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
self->ops->fixup if it isn't NULL.
* arch/arm-get-next-pcs.h: Include gdb_vecs.h.
(struct arm_get_next_pcs_ops) <fixup>: New field.
* arch/arm-linux.c: Include common-regcache.h and
arch/arm-get-next-pcs.h.
(arm_linux_get_next_pcs_fixup): New function.
* arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
* arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
it with arm_linux_get_next_pcs_fixup.
(arm_linux_software_single_step): Move code to
arm_linux_get_next_pcs_fixup.
* arm-tdep.c (arm_get_next_pcs_ops): Initialize it.
2016-02-12 Marcin Kościelnicki <koriakin@0x04.net>
* xml-tdesc.c (target_fetch_description_xml) [!HAVE_LIBEXPAT]: Warn
and return NULL.
2016-02-12 Markus Metzger <markus.t.metzger@intel.com>
* frame.h (skip_tailcall_frames): Update comment.
* frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL
if only artificial frames are found. Update comment.
(frame_unwind_caller_id): Handle NULL return.
(frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that
skip_artificial_frames does not return NULL.
(frame_pop): Add an error if only tailcall frames are found.
* infcmd.c (finish_command): Move skip_tailcall_frames call into
forward-execution case. Add an error if only tailcall frames are
found.
2016-02-12 Markus Metzger <markus.t.metzger@intel.com>
* stack.c (frame_info): Check frame_unwind_caller_id.
2016-02-12 Markus Metzger <markus.t.metzger@intel.com>
* frame.h (skip_tailcall_frames): New.
* frame.c (skip_tailcall_frames): New.
(frame_pop): Call skip_tailcall_frames.
* infcmd.c (finish_command): Call skip_tailcall_frames.
2016-02-11 Pedro Alves <palves@redhat.com>
* Makefile.in (check-parallel): New rule.
2016-02-11 Simon Marchi <simon.marchi@ericsson.com>
* arm-tdep.c (arm_skip_prologue): Remove unused variables.
(arm_analyze_prologue): Likewise.
(arm_scan_prologue): Likewise.
(arm_m_exception_prev_register): Likewise.
(arm_copy_block_xfer): Likewise.
(thumb2_copy_block_xfer): Likewise.
(arm_decode_miscellaneous): Likewise.
(arm_decode_ld_st_word_ubyte): Likewise.
(arm_decode_svc_copro): Likewise.
(thumb2_decode_svc_copro): Likewise.
(thumb_copy_16bit_ldr_literal): Likewise.
(thumb_copy_pop_pc_16bit): Likewise.
(decode_thumb_32bit_ld_mem_hints): Likewise.
(arm_show_force_mode): Likewise.
(_initialize_arm_tdep): Likewise.
(arm_record_strx): Likewise.
(arm_record_extension_space): Likewise.
(arm_record_data_proc_misc_ld_str): Likewise.
(arm_record_exreg_ld_st_insn): Likewise.
(arm_record_vfp_data_proc_insn): Likewise.
(arm_record_coproc_data_proc): Likewise.
(thumb_record_misc): Likewise.
(thumb_record_ldm_stm_swi): Likewise.
(thumb2_record_ld_st_dual_ex_tbb): Likewise.
(thumb2_record_ld_mem_hints): Likewise.
(thumb2_record_lmul_lmla_div): Likewise.
(thumb2_record_asimd_struct_ld_st): Likewise.
(arm_process_record): Likewise.
2016-02-11 Simon Marchi <simon.marchi@ericsson.com>
* arm-tdep.c (arm_displaced_step_copy_insn): Remove.
(ARM displaced stepping support): Remove reference to
arm_displaced_step_copy_insn in comment.
* arm-tdep.h (arm_displaced_step_copy_insn): Remove.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
reference to arm_displaced_step_copy_insn in comment.
2016-02-11 Simon Marchi <simon.marchi@ericsson.com>
* arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn.
(thumb_copy_b): Likewise.
(arm_decode_b_bl_ldmstm): Likewise.
(thumb_copy_16bit_ldr_literal): Likewise.
(thumb_copy_pop_pc_16bit): Likewise.
2016-02-11 Antoine Tremblay <antoine.tremblay@ericsson.com>
* tracepoint.c (encode_actions_1): Use target_gdbarch () rather
than loc->gdbarch.
2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
* tracefile-tfile.c (trace_tdesc): New static variable.
(tfile_open): Clear trace_tdesc, call target_find_description.
(tfile_interp_line): Recognize tdesc lines.
(tfile_close): Clear trace_tdesc.
(tfile_xfer_partial_features): New function.
(tfile_xfer_partial): Call tfile_xfer_partial_features.
(tfile_append_tdesc_line): New function.
2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
* ctf.c (ctf_write_tdesc): New function.
(ctf_write_ops): Wire in ctf_write_tdesc.
* tracefile-tfile.c (tfile_write_tdesc): New function.
(tfile_write_ops): Wire in tfile_write_tdesc.
* tracefile.c (trace_save): Call write_tdesc method.
* tracefile.h (struct trace_file_write_ops): Add write_tdesc method.
* xml-tdesc.c (target_fetch_description_xml): New function.
* xml-tdesc.h: Add target_fetch_description_xml prototype.
2016-02-10 Simon Marchi <simon.marchi@ericsson.com>
* arm-tdep.c (arm_copy_extra_ld_st): Fix "unpriveleged" typo.
(arm_decode_dp_misc): Likewise.
2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
* amd64-tdep.c (amd64_ax_pseudo_register_collect): New function.
(amd64_init_abi): Fill ax_pseudo_register_collect hook.
* i386-tdep.c (i386_pseudo_register_read_into_value): Remove
misleading comment.
(i386_pseudo_register_write): Ditto.
(i386_ax_pseudo_register_collect): New function.
(i386_gdbarch_init): Fill ax_pseudo_register_collect hook.
* i386-tdep.h: Add i386_ax_pseudo_register_collect prototype.
2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
* tracefile-tfile.c (tfile_fetch_registers): Use g packet order
instead of gdb order.
2016-02-10 Marcin Kościelnicki <koriakin@0x04.net>
* tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds
check.
2016-02-10 Joel Brobecker <brobecker@adacore.com>
* NEWS: Create a new section for the next release branch.
Rename the section of the current branch, now that it has
been cut.
2016-02-10 Joel Brobecker <brobecker@adacore.com>
GDB 7.11 branch created (9ef9e6a6a0dd8f948708cb67c9afcfd0be40cb0a):
* version.in: Bump version to 7.11.50.DATE-git.
2016-02-09 Keith Seitz <keiths@redhat.com>
PR breakpoints/19546
* breakpoint.c (breakpoint_event_location_empty_p): New function.
(update_breakpoints_after_exec, bkpt_re_set): Use this new function
instead of event_location_empty_p.
2016-02-09 Keith Seitz <keiths@redhat.com>
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
string_to_event_location_basic instead of string_to_event_location.
2016-02-09 Keith Seitz <keiths@redhat.com>
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip
leading whitespace and use string_to_event_location_basic instead
of new_linespec_location.
2016-02-09 Keith Seitz <keiths@redhat.com>
PR python/19506
* python/py-breakpoint.c (bppy_init): Use
string_to_event_location_basic instead of new_linespec_location.
2016-02-09 Keith Seitz <keiths@redhat.com>
* location.c (string_to_explicit_location): Note that "-p" is
reserved for probe locations and return NULL for any input
that starts with that.
(string_to_event_location): Move "legacy" linespec code to ...
(string_to_event_location_basic): ... here.
* location.h (string_to_event_location): Update comment.
(string_to_event_location_basic): New function.
2016-02-09 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT. Remove "exit 0" at the end.
* configure: Regenerate.
2016-02-09 Pedro Alves <palves@redhat.com>
PR breakpoints/19548
* breakpoint.c (create_overlay_event_breakpoint): Don't update
global location list here.
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, create_jit_event_breakpoint)
(update_breakpoint_locations):
(breakpoint_re_set): Update global location list after all
breakpoints are re-set.
2016-02-08 Simon Marchi <simon.marchi@ericsson.com>
* remote.c (remote_register_number_and_offset): Remove unused
variable(s).
(remote_thread_always_alive): Likewise.
(remote_update_thread_list): Likewise.
(process_initial_stop_replies): Likewise.
(remote_start_remote): Likewise.
(remote_check_symbols): Likewise.
(discard_pending_stop_replies): Likewise.
(process_stop_reply): Likewise.
(putpkt_binary): Likewise.
(getpkt): Likewise.
(remote_add_target_side_condition): Likewise.
(remote_insert_breakpoint): Likewise.
(remote_supports_stopped_by_sw_breakpoint): Likewise.
(remote_supports_stopped_by_hw_breakpoint): Likewise.
(remote_xfer_partial): Likewise.
(remote_read_btrace): Likewise.
(remote_async_serial_handler): Likewise.
(remote_thread_events): Likewise.
(_initialize_remote): Likewise.
2016-02-07 Simon Marchi <simon.marchi@polymtl.ca>
* varobj.h (varobj_delete): Remove dellist parameter, update and
move documentation here.
* varobj.c (struct cpstack, cppush, cppop): Remove.
(delete_variable): Remove resultp (first) parameter.
(delete_variable_1): Likewise.
(varobj_delete): Remove dellist parameter and unused code.
(update_dynamic_varobj_children): Adjust varobj_delete call.
(update_type_if_necessary): Likewise.
(varobj_set_visualizer): Likewise.
(varobj_update): Likewise.
(value_of_root): Likewise.
(varobj_invalidate_iter): Likewise.
* mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise.
2016-02-04 Yao Qi <yao.qi@linaro.org>
* remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to
0 before handling 'F' and set it back afterwards.
2016-02-02 Simon Marchi <simon.marchi@ericsson.com>
* ui-out.c (MAX_UI_OUT_LEVELS): Remove.
2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval):
New types.
(compat_siginfo): New bound fields added.
(compat_x32_siginfo): New field added.
(cpt_si_addr_lsb): New define.
(compat_siginfo_from_siginfo): Use nat_siginfo.
(siginfo_from_compat_siginfo): Use nat_siginfo.
(compat_x32_siginfo_from_siginfo): Likewise.
(siginfo_from_compat_x32_siginfo): Likewise.
2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
* linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd
structure to the siginfo if extra_fields contains
LINUX_SIGINFO_FIELD_ADDR_BND.
2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
* linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
* linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
* i386-linux-tdep.h (x86_linux_get_siginfo_type): New
function.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
x86_linux_get_siginfo_type for the amd64 abi.
* i386-linux-tdep.c (x86_linux_get_siginfo_type): New
function.
(i386_linux_init_abi): Add new function at the i386 ABI
initialization.
2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
* linux-tdep.h (linux_siginfo_extra_field_values): New enum values.
(linux_siginfo_extra_fields): New enum type.
* linux-tdep.c (linux_get_siginfo_type_with_fields): New function.
(linux_get_siginfo_type): Use new function.
2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
* nat/amd64-linux-siginfo.c: New file.
* nat/amd64-linux-siginfo.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h.
(amd64-linux-siginfo.o): New rule.
* config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o.
* amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
(compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
(cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
(cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
(cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c.
2016-02-01 Andrew Burgess <andrew.burgess@embecosm.com>
* value.c (max_value_size): New variable.
(MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
(set_max_value_size): New function.
(show_max_value_size): New function.
(check_type_length_before_alloc): New function.
(allocate_value_contents): Call check_type_length_before_alloc.
(set_value_enclosing_type): Likewise.
(_initialize_values): Add set/show handler for max-value-size.
* NEWS: Mention new set/show command.
2016-01-31 Simon Marchi <simon.marchi@polymtl.ca>
* varobj.h (struct varobj): Fix typos in comments.
(struct lang_varobj_ops): Likewise.
* varobj.c (VAROBJ_TABLE_SIZE): Likewise.
(varobj_create): Move misplaced comment.
2016-01-29 Simon Marchi <simon.marchi@ericsson.com>
* aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
to for include additional lines.
* xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.
2016-01-28 Simon Marchi <simon.marchi@ericsson.com>
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/m4/gnulib-cache.m4: Regenerate.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.
2016-01-28 Simon Marchi <simon.marchi@ericsson.com>
* remote.c (skip_to_semicolon): Remove.
(remote_parse_stop_reply): Use strchrnul instead of
skip_to_semicolon.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
strchrnul.
* gnulib/aclocal.m4: Regenerate.
* gnulib/config.in: Regenerate.
* gnulib/configure: Regenerate.
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/m4/gnulib-cache.m4: Regenerate.
* gnulib/import/m4/gnulib-comp.m4: Regenerate.
* gnulib/import/m4/rawmemchr.m4: New file.
* gnulib/import/m4/strchrnul.m4: New file.
* gnulib/import/rawmemchr.c: New file.
* gnulib/import/rawmemchr.valgrind: New file.
* gnulib/import/strchrnul.c: New file.
* gnulib/import/strchrnul.valgrind: New file.
2016-01-28 Yao Qi <yao.qi@linaro.org>
* breakpoint.c (build_target_command_list): Don't call continue
if aexpr is NULL.
(build_target_condition_list): Likewise.
2016-01-27 Kevin Buettner <kevinb@redhat.com>
* rx-tdep.c (rx_push_dummy_call): Treat scalars larger than 8
bytes as aggregates.
2016-01-27 Joel Brobecker <brobecker@adacore.com>
* MAINTAINERS (Responsible Maintainers): Add Keith Seitz as
Linespec Maintainers.
2016-01-26 Simon Marchi <simon.marchi@ericsson.com>
* common/common-utils.c (skip_spaces): Fix comment.
(skip_to_space_const): Likewise.
2016-01-25 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
Remove argument pc. Get pc by regcache_read_pc. Callers updated.
(arm_deal_with_atomic_sequence_raw): Likewise.
(thumb_get_next_pcs_raw): Likewise.
(arm_get_next_pcs_raw): Likewise.
(arm_get_next_pcs): Remove argument pc. Callers updated.
* arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
2016-01-25 Mark Wielaard <mjw@redhat.com>
* ada-lang.c (ada_evaluate_subexp): Add proper else block.
* c-typeprint.c (c_type_print_base): Fix misleading indentation of
if statement.
* inflow.c (child_terminal_ours_1): Fix misleading indentation of
statement block by introducing an else.
* linux-record.c (record_linux_sockaddr): Fix misleading indentation
of return statements.
(record_linux_msghdr): Likewise.
2016-01-25 Pedro Alves <palves@redhat.com>
PR threads/19461
* infrun.c (handle_inferior_event_1) <fork/vfork>: Update
parent/child running states.
2016-01-25 Pedro Alves <palves@redhat.com>
PR gdb/19494
* linux-nat.c (kill_one_lwp): New, factored out from ...
(kill_callback): ... this.
(kill_wait_callback): New, factored out from ...
(kill_wait_one_lwp): ... this.
(kill_unfollowed_fork_children): New function.
(linux_nat_kill): Use it.
2016-01-22 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c (fbsd_pid_to_str): Adjust string format.
2016-01-22 Yao Qi <yao.qi@linaro.org>
* arm-linux-nat.c (fetch_fpregs): Call perror_with_name
instead of warning.
(store_fpregs, fetch_regs, store_regs): Likewise.
(fetch_wmmx_regs, store_wmmx_regs): Likewise.
(fetch_vfp_regs, store_vfp_regs): Likewise.
2016-01-21 Doug Evans <dje@google.com>
* breakpoint.c (init_breakpoint_sal): Add comment.
2016-01-21 Marcin Kościelnicki <koriakin@0x04.net>
* ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.
2016-01-21 Andrew Burgess <andrew.burgess@embecosm.com>
* disasm.c (maybe_add_dis_line_entry): Rename to...
(add_dis_line_entry): ...this, and update header comment.
(do_mixed_source_and_assembly): Now use add_dis_line_entry.
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS): New.
(CXXFLAGS): Get it from configure.
(INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
instead of CFLAGS.
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
COMPILER_CFLAGS.
* configure: Regenerate.
2016-01-21 Joel Brobecker <brobecker@adacore.com>
* location.h (new_address_location): Add new parameters
"addr_string" and "addr_string_len".
(get_address_string_location): Add declaration.
* location.c (new_address_location): Add new parameters
"addr_string" and "addr_string_len". If not NULL, store
a copy of the addr_string in the new location as well.
(get_address_string_location): New function.
(string_to_event_location): Update call to new_address_location.
* linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
Save the event location in the parser's state before
passing it to convert_address_location_to_sals.
* breakpoint.c (create_thread_event_breakpoint): Update call
to new_address_location.
(init_breakpoint_sal): Get the event location's string, if any,
and use it to update call to new_address_location.
* python/py-finishbreakpoint.c (bpfinishpy_init):
Update call to new_address_location.
* spu-tdep.c (spu_catch_start): Likewise.
* config/djgpp/fnchange.lst: Add entries for
gdb/testsuite/gdb.base/break-fun-addr1.c and
gdb/testsuite/gdb.base/break-fun-addr2.c.
2016-01-21 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_linux_sigreturn_next_pc.
2016-01-20 Simon Marchi <simon.marchi@polymtl.ca>
* python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
Fix enumerators sort key function.
2016-01-20 Joel Brobecker <brobecker@adacore.com>
* printcmd.c (print_scalar_formatted): Move binary operator from
end of line to beginning of next line. Adjust formatting
accordingly.
2016-01-19 John Baldwin <jhb@FreeBSD.org>
* fbsd-nat.c (fbsd_pid_to_exec_file): Use new "buflen" instead of
"len" with sysctl.
2016-01-19 John Baldwin <jhb@FreeBSD.org>
* fbsd-tdep.c (find_stop_signal): Remove.
(struct fbsd_collect_regset_section_cb) <lwp>: New field.
<stop_signal>: New field.
<abort_iteration>: New field.
(fbsd_collect_regset_section_cb): Use new fields.
(fbsd_collect_thread_registers): New function.
(struct fbsd_corefile_thread_data): New structure.
(fbsd_corefile_thread): New function.
(fbsd_make_corefile_notes): Use new function to dump notes for each
non-exited thread in a process.
2016-01-19 John Baldwin <jhb@FreeBSD.org>
* configure.ac: Check for support for LWP names on FreeBSD.
* fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
[TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
(fbsd_fetch_kinfo_proc): Move function earlier.
[PT_LWPINFO] (fbsd_thread_alive): New function.
[PT_LWPINFO] (fbsd_pid_to_str): New function.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
[PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
[PT_LWPINFO] (fbsd_add_threads): New function.
[PT_LWPINFO] (fbsd_update_thread_list): New function.
[PT_LWPINFO] New variable super_resume.
[PT_LWPINFO] (resume_one_thread_cb): New function.
[PT_LWPINFO] (resume_all_threads_cb): New function.
[PT_LWPINFO] (fbsd_resume): New function.
(fbsd_remember_child): Save full ptid instead of plain pid.
(fbsd_is_child_pending): Return ptid of saved child process.
(fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
first stop.
[PT_LWP_EVENTS] Handle LWP events.
[TDP_RFPPWAIT] Include LWP in child ptid.
(fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
(fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
Add threads for existing processes.
(fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
"fbsd_thread_alive".
Set "to_pid_to_str" to "fbsd_pid_to_str".
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
"fbsd_thread_name".
[PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
Set "to_has_thread_control" to "tc_schedlock".
Set "to_resume" to "fbsd_resume".
(_initialize_fbsd_nat): New function.
* configure: Regenerate.
* config.in: Regenerate.
2016-01-19 John Baldwin <jhb@FreeBSD.org>
* amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
get_ptrace_pid.
(amd64bsd_store_inferior_registers): Use get_ptrace_pid.
(amd64bsd_dr_get): Use get_ptrace_pid.
(amd64bsd_dr_set): Use get_ptrace_pid.
* i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
(i386bsd_store_inferior_registers): Use get_ptrace_pid.
(i386bsd_dr_get): Use get_ptrace_pid.
(i386bsd_dr_set): Use get_ptrace_pid.
* inf-ptrace.c (get_ptrace_pid): Export.
* inf-ptrace.h (get_ptrace_pid): Declare.
* ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
(ppcfbsd_store_inferior_registers): Use lwp id.
2016-01-19 John Baldwin <jhb@FreeBSD.org>
* fbsd_tdep.c (fbsd_core_pid_to_str): New function.
(fbsd_core_thread_name): New function.
(fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
Add "core_thread_name" gdbarch method.
2016-01-19 John Baldwin <jhb@FreeBSD.org>
* corelow.c (core_thread_name): New function.
(init_core_ops): Use "core_thread_name" for the "to_thread_name"
target op.
* gdbarch.sh (core_thread_name): New gdbarch callback.
* gdbarch.h: Re-generate.
* gdbarch.c: Re-generate.
2016-01-19 Simon Marchi <simon.marchi@polymtl.ca>
* python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
convert gdb.Value to integer type using int().
2016-01-19 John Baldwin <jhb@FreeBSD.org>
* configure.ac: Include <sys/types.h when checking for "r_fs" in
"struct reg".
* configure: Regenerate.
2016-01-19 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
* break-catch-throw.c (re_set_exception_catchpoint): Pass the
current program space down to linespec decoding and breakpoint
location updating.
* breakpoint.c (parse_breakpoint_sals): Adjust calls to
decode_line_full.
(until_break_command): Adjust calls to decode_line_1.
(base_breakpoint_decode_location, bkpt_decode_location): Add
'search_pspace' parameter. Pass it along.
(bkpt_probe_create_sals_from_location): Adjust calls to
parse_probes.
(tracepoint_decode_location, tracepoint_probe_decode_location)
(strace_marker_decode_location): Add 'search_pspace' parameter.
Pass it along.
(all_locations_are_pending): Rewrite to take a breakpoint and
program space as arguments instead.
(hoist_existing_locations): New function.
(update_breakpoint_locations): Add 'filter_pspace' parameter. Use
hoist_existing_locations instead of always removing all locations,
and adjust to all_locations_are_pending change.
(location_to_sals): Add 'search_pspace' parameter. Pass it along.
Don't disable the breakpoint if there are other locations in
another program space.
(breakpoint_re_set_default): Adjust to pass down the current
program space as filter program space.
(decode_location_default): Add 'search_pspace' parameter and pass
it along.
(prepare_re_set_context): Don't switch program space here.
(breakpoint_re_set): Use save_current_space_and_thread instead of
save_current_program_space.
* breakpoint.h (struct breakpoint_ops) <decode_location>: Add
'search_pspace' parameter.
(update_breakpoint_locations): Add 'filter_pspace' parameter.
* cli/cli-cmds.c (edit_command, list_command): Adjust calls to
decode_line_1.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
program space as filter program space.
* linespec.c (struct linespec_state) <search_pspace>: New field.
(create_sals_line_offset, convert_explicit_location_to_sals)
(parse_linespec): Pass the search program space down.
(linespec_state_constructor): Add 'search_pspace' parameter.
Store it.
(linespec_parser_new): Add 'search_pspace' parameter and pass it
along.
(linespec_lex_to_end): Adjust.
(decode_line_full, decode_line_1): Add 'search_pspace' parameter
and pass it along.
(decode_line_with_last_displayed): Adjust.
(collect_symtabs_from_filename, symtabs_from_filename): New
'search_pspace' parameter. Use it.
(find_function_symbols): Pass the search program space down.
* linespec.h (decode_line_1, decode_line_full): Add
'search_pspace' parameter.
* probe.c (parse_probes_in_pspace): New function, factored out
from ...
(parse_probes): ... this. Add 'search_pspace' parameter and use
it.
* probe.h (parse_probes): Add pspace' parameter.
* python/python.c (gdbpy_decode_line): Adjust.
* tracepoint.c (scope_info): Adjust.
2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
instruction support.
(micromips_next_pc): Likewise.
(micromips_scan_prologue): Likewise.
(micromips_deal_with_atomic_sequence): Likewise.
(micromips_stack_frame_destroyed_p): Likewise.
(mips_breakpoint_from_pc): Likewise.
2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
* mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
unshifted 16-bit microMIPS instruction word to `mips_insn_size'.
2016-01-18 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB now displays the ID and name of the
thread that hit a breakpoint or received a signal.
* break-catch-sig.c (signal_catchpoint_print_it): Use
maybe_print_thread_hit_breakpoint.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
Use maybe_print_thread_hit_breakpoint.
* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
* gdbthread.h (show_thread_that_caused_stop): Declare.
* infrun.c (print_signal_received_reason): Print which thread
received signal.
* thread.c (show_thread_that_caused_stop): New function.
2016-01-18 Gary Benson <gbenson@redhat.com>
* nat/linux-namespaces.c (do_fork): New function.
(linux_mntns_get_helper): Use the above.
2016-01-17 Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de> (tiny change)
Pushed by Joel Brobecker <brobecker@adacore.com>.
PR gdb/19208
* dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
if the function has no name.
2016-01-15 Sandra Loosemore <sandra@codesourcery.com>
* charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
Conditionalize for Windows host.
(GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
(GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
(phony_iconv_open): Handle both UTF-32 endiannesses.
(phony_iconv): Likewise. Check for output overflow and clean up
out-of-input cases. Correct adjustment to input buffer pointer.
(set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
phony_iconv_open.
2016-01-15 Pedro Alves <palves@redhat.com>
* NEWS: Mention star wildcard ranges.
* cli/cli-utils.c (get_number_or_range): Check state->in_range first.
(number_range_setup_range): New function.
* cli/cli-utils.h (number_range_setup_range): New declaration.
* thread.c (thread_apply_command): Support star TID ranges.
* tid-parse.c (tid_range_parser_finished)
(tid_range_parser_string, tid_range_parser_skip)
(get_tid_or_range, get_tid_or_range): Handle
TID_RANGE_STATE_STAR_RANGE.
(tid_range_parser_star_range): New function.
* tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
New value.
(tid_range_parser_star_range): New declaration.
2016-01-15 Pedro Alves <palves@redhat.com>
* thread.c (thread_apply_command): Use the tid range parser to
advance past the thread ID list.
* tid-parse.c (get_positive_number_trailer): New function.
(parse_thread_id): Use it.
(get_tid_or_range): Use it. Return 0 instead of throwing invalid
thread ID error.
(get_tid_or_range): Detect negative values. Return 0 instead of
throwing invalid thread ID error.
2016-01-14 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
Declare.
(arm_linux_get_next_pcs_ops): Install
arm_linux_get_next_pcs_syscall_next_pc.
(arm_linux_syscall_next_pc): Change to ...
(arm_linux_get_next_pcs_syscall_next_pc): ... it.
(arm_linux_init_abi): Don't set tdep->syscall_next_pc.
* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
(arm_get_next_pcs_syscall_next_pc): Make it static. Don't
call tdep->syscall_next_pc.
* arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
(arm_get_next_pcs_syscall_next_pc): Remove.
2016-01-14 Yao Qi <yao.qi@linaro.org>
* remote.c (remote_set_syscall_catchpoint): Cast to char *.
* thread.c (do_captured_thread_select): Cast to const char *.
2016-01-14 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
(thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
instead.
* arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
<arm_thumb2_breakpoint>: Remove.
<has_thumb2_breakpoint>: New field.
(arm_get_next_pcs_ctor): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass
1 to arm_get_next_pcs_ctor.
* arm-tdep.c (arm_software_single_step): Pass 0 to
arm_get_next_pcs_ctor.
2016-01-13 Ulrich Weigand <uweigand@de.ibm.com>
* MAINTAINERS: Add Andreas Arnez as s390 target maintainer.
2016-01-13 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
byte_order_for_code to read instruction.
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention $_gthread.
* gdbthread.h (struct thread_info) <global_num>: Mention
$_gthread.
* thread.c (thread_num_make_value_helper): New function.
(thread_id_make_value): Delete.
(thread_id_per_inf_num_make_value, global_thread_id_make_value):
New.
(thread_funcs): Adjust.
(gthread_funcs): New.
(_initialize_thread): Register $_gthread variable.
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention "info threads -gid".
* gdbthread.h (struct thread_info) <global_num>: Mention "info
threads -gid".
* thread.c (info_threads_command): Handle "-gid".
(_initialize_thread): Adjust "info threads" help string to mention
-gid.
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention InferiorThread.global_num.
* python/py-infthread.c (thpy_get_global_num): New function.
(thread_object_getset): Register "global_num".
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
2016-01-13 Pedro Alves <palves@redhat.com>
* breakpoint.c (remove_threaded_breakpoints)
(print_one_breakpoint_location): Use print_thread_id.
* btrace.c (btrace_enable, btrace_disable, btrace_teardown)
(btrace_fetch, btrace_clear): Use print_thread_id.
* common/print-utils.c (CELLSIZE): Delete.
(get_cell): Rename to ...
(get_print_cell): ... this and made extern. Adjust call callers.
Adjust to use PRINT_CELL_SIZE.
* common/print-utils.h (get_print_cell): Declare.
(PRINT_CELL_SIZE): New.
* gdbthread.h (print_thread_id): Declare.
* infcmd.c (signal_command): Use print_thread_id.
* inferior.c (print_inferior): Use print_thread_id.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe)
(print_signal_received_reason): Use print_thread_id.
* record-btrace.c (record_btrace_info)
(record_btrace_resume_thread, record_btrace_cancel_resume)
(record_btrace_step_thread, record_btrace_wait): Use
print_thread_id.
* thread.c (thread_apply_all_command): Use print_thread_id.
(print_thread_id): New function.
(thread_apply_command): Use print_thread_id.
(thread_command, thread_find_command, do_captured_thread_select):
Use print_thread_id.
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention InferiorThread.inferior.
* python/py-infthread.c (thpy_get_inferior): New.
(thread_object_getset): Register "inferior".
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention $_inferior.
* inferior.c (inferior_id_make_value): New.
(inferior_funcs): New.
(_initialize_inferior): Create $_inferior variable.
2016-01-13 Pedro Alves <palves@redhat.com>
PR breakpoints/19388
* frame.c (get_current_frame): Use validate_registers_access.
* gdbthread.h (validate_registers_access): Declare.
* infrun.c (validate_siginfo_access): Delete.
(siginfo_value_read, siginfo_value_write): Use
validate_registers_access.
* thread.c (validate_registers_access): New function.
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
syscall_entry and syscall_return stop reasons. Mention GDB
support for remote catch syscall.
* remote.c (PACKET_QCatchSyscalls): New enum.
(remote_set_syscall_catchpoint): New function.
(remote_protocol_features): New element for QCatchSyscalls.
(remote_parse_stop_reply): Parse syscall_entry/return stops.
(init_remote_ops): Install remote_set_syscall_catchpoint.
(_initialize_remote): Config QCatchSyscalls.
* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
2016-01-12 Yao Qi <yao.qi@linaro.org>
* nat/linux-ptrace.c (linux_child_function): Cast child_stack
to gdb_byte * and pass to linux_fork_to_function.
2016-01-12 Yao Qi <yao.qi@linaro.org>
* nat/linux-ptrace.c (linux_fork_to_function): Change type
of argument 'function'.
(linux_grandchild_function): Change return type to 'int'.
Change child_stack's type to 'void *'.
(linux_child_function): Likewise.
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
2016-01-12 Thomas Schwinge <thomas@codesourcery.com>
* reply_mig_hack.awk: Rewrite one regular expression.
2016-01-11 Mike Frysinger <vapier@gentoo.org>
* acinclude.m4: Include new warning.m4 file.
* configure: Regenerated.
* configure.ac: Move all warning logic ...
* warning.m4: ... here.
2016-01-08 Yao Qi <yao.qi@linaro.org>
* extension.c: Include target.h.
(set_active_ext_lang): Only call install_gdb_sigint_handler,
check_quit_flag, and set_quit_flag if target_terminal_is_ours
returns false.
(restore_active_ext_lang): Likewise.
* target.c (target_terminal_is_ours): New function.
* target.h (target_terminal_is_ours): Declare.
2016-01-07 Maciej W. Rozycki <macro@imgtec.com>
* mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
to `err' in the little-endian leg.
2016-01-06 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
lines below.
(thumb_get_next_pcs_raw): Make it static.
(arm_get_next_pcs_raw): Likewise.
* arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
declaration.
(arm_get_next_pcs_raw): Likewise.
2016-01-05 Mike Frysinger <vapier@gentoo.org>
* version.in: Change cvs to git.
2016-01-05 Mike Frysinger <vapier@gentoo.org>
* configure.tgt (score-*-*): Delete gdb_sim assignment.
2016-01-05 Pedro Alves <palves@redhat.com>
PR sim/13418
* configure.ac: Define WITH_PPC_SIM when linking in the sim and
the target is powerpc*.
* rs6000-tdep.c (init_sim_regno_table): Check WITH_PPC_SIM instead
of WITH_SIM.
* configure: Regenerate.
* config.in: Regenerate.
2016-01-04 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.
2016-01-02 Mike Frysinger <vapier@gentoo.org>
* configure.tgt (powerpc*-*-*): Delete test call and
always assign gdb_sim.
2016-01-01 Joel Brobecker <brobecker@adacore.com>
Update year range in copyright notice of all files.
2016-01-01 Joel Brobecker <brobecker@adacore.com>
* top.c (print_gdb_version): Change copyright year in version
message.
2016-01-01 Joel Brobecker <brobecker@adacore.com>
* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.
For older changes see ChangeLog-2015.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: