| /* Native-dependent code for GNU/Linux on MIPS processors. | |
| Copyright (C) 2001-2023 Free Software Foundation, Inc. | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "defs.h" | |
| #include "command.h" | |
| #include "gdbcmd.h" | |
| #include "inferior.h" | |
| #include "mips-tdep.h" | |
| #include "target.h" | |
| #include "regcache.h" | |
| #include "linux-nat-trad.h" | |
| #include "mips-linux-tdep.h" | |
| #include "target-descriptions.h" | |
| #include "gdb_proc_service.h" | |
| #include "gregset.h" | |
| #include <sgidefs.h> | |
| #include "nat/gdb_ptrace.h" | |
| #include <asm/ptrace.h> | |
| #include "inf-ptrace.h" | |
| #include "nat/mips-linux-watch.h" | |
| #ifndef PTRACE_GET_THREAD_AREA | |
| #define PTRACE_GET_THREAD_AREA 25 | |
| #endif | |
| class mips_linux_nat_target final : public linux_nat_trad_target | |
| { | |
| public: | |
| /* Add our register access methods. */ | |
| void fetch_registers (struct regcache *, int) override; | |
| void store_registers (struct regcache *, int) override; | |
| void close () override; | |
| int can_use_hw_breakpoint (enum bptype, int, int) override; | |
| int remove_watchpoint (CORE_ADDR, int, enum target_hw_bp_type, | |
| struct expression *) override; | |
| int insert_watchpoint (CORE_ADDR, int, enum target_hw_bp_type, | |
| struct expression *) override; | |
| bool stopped_by_watchpoint () override; | |
| bool stopped_data_address (CORE_ADDR *) override; | |
| int region_ok_for_hw_watchpoint (CORE_ADDR, int) override; | |
| const struct target_desc *read_description () override; | |
| protected: | |
| /* Override linux_nat_trad_target methods. */ | |
| CORE_ADDR register_u_offset (struct gdbarch *gdbarch, | |
| int regno, int store_p) override; | |
| /* Override linux_nat_target low methods. */ | |
| void low_new_thread (struct lwp_info *lp) override; | |
| private: | |
| /* Helpers. See definitions. */ | |
| void mips64_regsets_store_registers (struct regcache *regcache, | |
| int regno); | |
| void mips64_regsets_fetch_registers (struct regcache *regcache, | |
| int regno); | |
| }; | |
| static mips_linux_nat_target the_mips_linux_nat_target; | |
| /* Assume that we have PTRACE_GETREGS et al. support. If we do not, | |
| we'll clear this and use PTRACE_PEEKUSER instead. */ | |
| static int have_ptrace_regsets = 1; | |
| /* Map gdb internal register number to ptrace ``address''. | |
| These ``addresses'' are normally defined in <asm/ptrace.h>. | |
| ptrace does not provide a way to read (or set) MIPS_PS_REGNUM, | |
| and there's no point in reading or setting MIPS_ZERO_REGNUM. | |
| We also can not set BADVADDR, CAUSE, or FCRIR via ptrace(). */ | |
| static CORE_ADDR | |
| mips_linux_register_addr (struct gdbarch *gdbarch, int regno, int store) | |
| { | |
| CORE_ADDR regaddr; | |
| if (regno < 0 || regno >= gdbarch_num_regs (gdbarch)) | |
| error (_("Bogon register number %d."), regno); | |
| if (regno > MIPS_ZERO_REGNUM && regno < MIPS_ZERO_REGNUM + 32) | |
| regaddr = regno; | |
| else if ((regno >= mips_regnum (gdbarch)->fp0) | |
| && (regno < mips_regnum (gdbarch)->fp0 + 32)) | |
| regaddr = FPR_BASE + (regno - mips_regnum (gdbarch)->fp0); | |
| else if (regno == mips_regnum (gdbarch)->pc) | |
| regaddr = PC; | |
| else if (regno == mips_regnum (gdbarch)->cause) | |
| regaddr = store? (CORE_ADDR) -1 : CAUSE; | |
| else if (regno == mips_regnum (gdbarch)->badvaddr) | |
| regaddr = store? (CORE_ADDR) -1 : BADVADDR; | |
| else if (regno == mips_regnum (gdbarch)->lo) | |
| regaddr = MMLO; | |
| else if (regno == mips_regnum (gdbarch)->hi) | |
| regaddr = MMHI; | |
| else if (regno == mips_regnum (gdbarch)->fp_control_status) | |
| regaddr = FPC_CSR; | |
| else if (regno == mips_regnum (gdbarch)->fp_implementation_revision) | |
| regaddr = store? (CORE_ADDR) -1 : FPC_EIR; | |
| else if (mips_regnum (gdbarch)->dspacc != -1 | |
| && regno >= mips_regnum (gdbarch)->dspacc | |
| && regno < mips_regnum (gdbarch)->dspacc + 6) | |
| regaddr = DSP_BASE + (regno - mips_regnum (gdbarch)->dspacc); | |
| else if (regno == mips_regnum (gdbarch)->dspctl) | |
| regaddr = DSP_CONTROL; | |
| else if (mips_linux_restart_reg_p (gdbarch) && regno == MIPS_RESTART_REGNUM) | |
| regaddr = 0; | |
| else | |
| regaddr = (CORE_ADDR) -1; | |
| return regaddr; | |
| } | |
| static CORE_ADDR | |
| mips64_linux_register_addr (struct gdbarch *gdbarch, int regno, int store) | |
| { | |
| CORE_ADDR regaddr; | |
| if (regno < 0 || regno >= gdbarch_num_regs (gdbarch)) | |
| error (_("Bogon register number %d."), regno); | |
| /* On n32 we can't access 64-bit registers via PTRACE_PEEKUSR | |
| or PTRACE_POKEUSR. */ | |
| if (register_size (gdbarch, regno) > sizeof (PTRACE_TYPE_RET)) | |
| return (CORE_ADDR) -1; | |
| if (regno > MIPS_ZERO_REGNUM && regno < MIPS_ZERO_REGNUM + 32) | |
| regaddr = regno; | |
| else if ((regno >= mips_regnum (gdbarch)->fp0) | |
| && (regno < mips_regnum (gdbarch)->fp0 + 32)) | |
| regaddr = MIPS64_FPR_BASE + (regno - gdbarch_fp0_regnum (gdbarch)); | |
| else if (regno == mips_regnum (gdbarch)->pc) | |
| regaddr = MIPS64_PC; | |
| else if (regno == mips_regnum (gdbarch)->cause) | |
| regaddr = store? (CORE_ADDR) -1 : MIPS64_CAUSE; | |
| else if (regno == mips_regnum (gdbarch)->badvaddr) | |
| regaddr = store? (CORE_ADDR) -1 : MIPS64_BADVADDR; | |
| else if (regno == mips_regnum (gdbarch)->lo) | |
| regaddr = MIPS64_MMLO; | |
| else if (regno == mips_regnum (gdbarch)->hi) | |
| regaddr = MIPS64_MMHI; | |
| else if (regno == mips_regnum (gdbarch)->fp_control_status) | |
| regaddr = MIPS64_FPC_CSR; | |
| else if (regno == mips_regnum (gdbarch)->fp_implementation_revision) | |
| regaddr = store? (CORE_ADDR) -1 : MIPS64_FPC_EIR; | |
| else if (mips_regnum (gdbarch)->dspacc != -1 | |
| && regno >= mips_regnum (gdbarch)->dspacc | |
| && regno < mips_regnum (gdbarch)->dspacc + 6) | |
| regaddr = DSP_BASE + (regno - mips_regnum (gdbarch)->dspacc); | |
| else if (regno == mips_regnum (gdbarch)->dspctl) | |
| regaddr = DSP_CONTROL; | |
| else if (mips_linux_restart_reg_p (gdbarch) && regno == MIPS_RESTART_REGNUM) | |
| regaddr = 0; | |
| else | |
| regaddr = (CORE_ADDR) -1; | |
| return regaddr; | |
| } | |
| /* Fetch the thread-local storage pointer for libthread_db. */ | |
| ps_err_e | |
| ps_get_thread_area (struct ps_prochandle *ph, | |
| lwpid_t lwpid, int idx, void **base) | |
| { | |
| if (ptrace (PTRACE_GET_THREAD_AREA, lwpid, NULL, base) != 0) | |
| return PS_ERR; | |
| /* IDX is the bias from the thread pointer to the beginning of the | |
| thread descriptor. It has to be subtracted due to implementation | |
| quirks in libthread_db. */ | |
| *base = (void *) ((char *)*base - idx); | |
| return PS_OK; | |
| } | |
| /* Wrapper functions. These are only used by libthread_db. */ | |
| void | |
| supply_gregset (struct regcache *regcache, const gdb_gregset_t *gregsetp) | |
| { | |
| if (mips_isa_regsize (regcache->arch ()) == 4) | |
| mips_supply_gregset (regcache, (const mips_elf_gregset_t *) gregsetp); | |
| else | |
| mips64_supply_gregset (regcache, (const mips64_elf_gregset_t *) gregsetp); | |
| } | |
| void | |
| fill_gregset (const struct regcache *regcache, | |
| gdb_gregset_t *gregsetp, int regno) | |
| { | |
| if (mips_isa_regsize (regcache->arch ()) == 4) | |
| mips_fill_gregset (regcache, (mips_elf_gregset_t *) gregsetp, regno); | |
| else | |
| mips64_fill_gregset (regcache, (mips64_elf_gregset_t *) gregsetp, regno); | |
| } | |
| void | |
| supply_fpregset (struct regcache *regcache, const gdb_fpregset_t *fpregsetp) | |
| { | |
| mips64_supply_fpregset (regcache, (const mips64_elf_fpregset_t *) fpregsetp); | |
| } | |
| void | |
| fill_fpregset (const struct regcache *regcache, | |
| gdb_fpregset_t *fpregsetp, int regno) | |
| { | |
| mips64_fill_fpregset (regcache, (mips64_elf_fpregset_t *) fpregsetp, regno); | |
| } | |
| /* Fetch REGNO (or all registers if REGNO == -1) from the target | |
| using PTRACE_GETREGS et al. */ | |
| void | |
| mips_linux_nat_target::mips64_regsets_fetch_registers | |
| (struct regcache *regcache, int regno) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| int is_fp, is_dsp; | |
| int have_dsp; | |
| int regi; | |
| int tid; | |
| if (regno >= mips_regnum (gdbarch)->fp0 | |
| && regno <= mips_regnum (gdbarch)->fp0 + 32) | |
| is_fp = 1; | |
| else if (regno == mips_regnum (gdbarch)->fp_control_status) | |
| is_fp = 1; | |
| else if (regno == mips_regnum (gdbarch)->fp_implementation_revision) | |
| is_fp = 1; | |
| else | |
| is_fp = 0; | |
| /* DSP registers are optional and not a part of any set. */ | |
| have_dsp = mips_regnum (gdbarch)->dspctl != -1; | |
| if (!have_dsp) | |
| is_dsp = 0; | |
| else if (regno >= mips_regnum (gdbarch)->dspacc | |
| && regno < mips_regnum (gdbarch)->dspacc + 6) | |
| is_dsp = 1; | |
| else if (regno == mips_regnum (gdbarch)->dspctl) | |
| is_dsp = 1; | |
| else | |
| is_dsp = 0; | |
| tid = get_ptrace_pid (regcache->ptid ()); | |
| if (regno == -1 || (!is_fp && !is_dsp)) | |
| { | |
| mips64_elf_gregset_t regs; | |
| if (ptrace (PTRACE_GETREGS, tid, 0L, (PTRACE_TYPE_ARG3) ®s) == -1) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_regsets = 0; | |
| return; | |
| } | |
| perror_with_name (_("Couldn't get registers")); | |
| } | |
| mips64_supply_gregset (regcache, | |
| (const mips64_elf_gregset_t *) ®s); | |
| } | |
| if (regno == -1 || is_fp) | |
| { | |
| mips64_elf_fpregset_t fp_regs; | |
| if (ptrace (PTRACE_GETFPREGS, tid, 0L, | |
| (PTRACE_TYPE_ARG3) &fp_regs) == -1) | |
| { | |
| if (errno == EIO) | |
| { | |
| have_ptrace_regsets = 0; | |
| return; | |
| } | |
| perror_with_name (_("Couldn't get FP registers")); | |
| } | |
| mips64_supply_fpregset (regcache, | |
| (const mips64_elf_fpregset_t *) &fp_regs); | |
| } | |
| if (is_dsp) | |
| linux_nat_trad_target::fetch_registers (regcache, regno); | |
| else if (regno == -1 && have_dsp) | |
| { | |
| for (regi = mips_regnum (gdbarch)->dspacc; | |
| regi < mips_regnum (gdbarch)->dspacc + 6; | |
| regi++) | |
| linux_nat_trad_target::fetch_registers (regcache, regi); | |
| linux_nat_trad_target::fetch_registers (regcache, | |
| mips_regnum (gdbarch)->dspctl); | |
| } | |
| } | |
| /* Store REGNO (or all registers if REGNO == -1) to the target | |
| using PTRACE_SETREGS et al. */ | |
| void | |
| mips_linux_nat_target::mips64_regsets_store_registers | |
| (struct regcache *regcache, int regno) | |
| { | |
| struct gdbarch *gdbarch = regcache->arch (); | |
| int is_fp, is_dsp; | |
| int have_dsp; | |
| int regi; | |
| int tid; | |
| if (regno >= mips_regnum (gdbarch)->fp0 | |
| && regno <= mips_regnum (gdbarch)->fp0 + 32) | |
| is_fp = 1; | |
| else if (regno == mips_regnum (gdbarch)->fp_control_status) | |
| is_fp = 1; | |
| else if (regno == mips_regnum (gdbarch)->fp_implementation_revision) | |
| is_fp = 1; | |
| else | |
| is_fp = 0; | |
| /* DSP registers are optional and not a part of any set. */ | |
| have_dsp = mips_regnum (gdbarch)->dspctl != -1; | |
| if (!have_dsp) | |
| is_dsp = 0; | |
| else if (regno >= mips_regnum (gdbarch)->dspacc | |
| && regno < mips_regnum (gdbarch)->dspacc + 6) | |
| is_dsp = 1; | |
| else if (regno == mips_regnum (gdbarch)->dspctl) | |
| is_dsp = 1; | |
| else | |
| is_dsp = 0; | |
| tid = get_ptrace_pid (regcache->ptid ()); | |
| if (regno == -1 || (!is_fp && !is_dsp)) | |
| { | |
| mips64_elf_gregset_t regs; | |
| if (ptrace (PTRACE_GETREGS, tid, 0L, (PTRACE_TYPE_ARG3) ®s) == -1) | |
| perror_with_name (_("Couldn't get registers")); | |
| mips64_fill_gregset (regcache, ®s, regno); | |
| if (ptrace (PTRACE_SETREGS, tid, 0L, (PTRACE_TYPE_ARG3) ®s) == -1) | |
| perror_with_name (_("Couldn't set registers")); | |
| } | |
| if (regno == -1 || is_fp) | |
| { | |
| mips64_elf_fpregset_t fp_regs; | |
| if (ptrace (PTRACE_GETFPREGS, tid, 0L, | |
| (PTRACE_TYPE_ARG3) &fp_regs) == -1) | |
| perror_with_name (_("Couldn't get FP registers")); | |
| mips64_fill_fpregset (regcache, &fp_regs, regno); | |
| if (ptrace (PTRACE_SETFPREGS, tid, 0L, | |
| (PTRACE_TYPE_ARG3) &fp_regs) == -1) | |
| perror_with_name (_("Couldn't set FP registers")); | |
| } | |
| if (is_dsp) | |
| linux_nat_trad_target::store_registers (regcache, regno); | |
| else if (regno == -1 && have_dsp) | |
| { | |
| for (regi = mips_regnum (gdbarch)->dspacc; | |
| regi < mips_regnum (gdbarch)->dspacc + 6; | |
| regi++) | |
| linux_nat_trad_target::store_registers (regcache, regi); | |
| linux_nat_trad_target::store_registers (regcache, | |
| mips_regnum (gdbarch)->dspctl); | |
| } | |
| } | |
| /* Fetch REGNO (or all registers if REGNO == -1) from the target | |
| using any working method. */ | |
| void | |
| mips_linux_nat_target::fetch_registers (struct regcache *regcache, int regnum) | |
| { | |
| /* Unless we already know that PTRACE_GETREGS does not work, try it. */ | |
| if (have_ptrace_regsets) | |
| mips64_regsets_fetch_registers (regcache, regnum); | |
| /* If we know, or just found out, that PTRACE_GETREGS does not work, fall | |
| back to PTRACE_PEEKUSER. */ | |
| if (!have_ptrace_regsets) | |
| { | |
| linux_nat_trad_target::fetch_registers (regcache, regnum); | |
| /* Fill the inaccessible zero register with zero. */ | |
| if (regnum == MIPS_ZERO_REGNUM || regnum == -1) | |
| regcache->raw_supply_zeroed (MIPS_ZERO_REGNUM); | |
| } | |
| } | |
| /* Store REGNO (or all registers if REGNO == -1) to the target | |
| using any working method. */ | |
| void | |
| mips_linux_nat_target::store_registers (struct regcache *regcache, int regnum) | |
| { | |
| /* Unless we already know that PTRACE_GETREGS does not work, try it. */ | |
| if (have_ptrace_regsets) | |
| mips64_regsets_store_registers (regcache, regnum); | |
| /* If we know, or just found out, that PTRACE_GETREGS does not work, fall | |
| back to PTRACE_PEEKUSER. */ | |
| if (!have_ptrace_regsets) | |
| linux_nat_trad_target::store_registers (regcache, regnum); | |
| } | |
| /* Return the address in the core dump or inferior of register | |
| REGNO. */ | |
| CORE_ADDR | |
| mips_linux_nat_target::register_u_offset (struct gdbarch *gdbarch, | |
| int regno, int store_p) | |
| { | |
| if (mips_abi_regsize (gdbarch) == 8) | |
| return mips64_linux_register_addr (gdbarch, regno, store_p); | |
| else | |
| return mips_linux_register_addr (gdbarch, regno, store_p); | |
| } | |
| const struct target_desc * | |
| mips_linux_nat_target::read_description () | |
| { | |
| static int have_dsp = -1; | |
| if (have_dsp < 0) | |
| { | |
| /* Assume no DSP if there is no inferior to inspect with ptrace. */ | |
| if (inferior_ptid == null_ptid) | |
| return _MIPS_SIM == _ABIO32 ? tdesc_mips_linux : tdesc_mips64_linux; | |
| int tid = get_ptrace_pid (inferior_ptid); | |
| errno = 0; | |
| ptrace (PTRACE_PEEKUSER, tid, DSP_CONTROL, 0); | |
| switch (errno) | |
| { | |
| case 0: | |
| have_dsp = 1; | |
| break; | |
| case EIO: | |
| have_dsp = 0; | |
| break; | |
| default: | |
| perror_with_name (_("Couldn't check DSP support")); | |
| break; | |
| } | |
| } | |
| /* Report that target registers are a size we know for sure | |
| that we can get from ptrace. */ | |
| if (_MIPS_SIM == _ABIO32) | |
| return have_dsp ? tdesc_mips_dsp_linux : tdesc_mips_linux; | |
| else | |
| return have_dsp ? tdesc_mips64_dsp_linux : tdesc_mips64_linux; | |
| } | |
| /* -1 if the kernel and/or CPU do not support watch registers. | |
| 1 if watch_readback is valid and we can read style, num_valid | |
| and the masks. | |
| 0 if we need to read the watch_readback. */ | |
| static int watch_readback_valid; | |
| /* Cached watch register read values. */ | |
| static struct pt_watch_regs watch_readback; | |
| static struct mips_watchpoint *current_watches; | |
| /* The current set of watch register values for writing the | |
| registers. */ | |
| static struct pt_watch_regs watch_mirror; | |
| static void | |
| mips_show_dr (const char *func, CORE_ADDR addr, | |
| int len, enum target_hw_bp_type type) | |
| { | |
| int i; | |
| gdb_puts (func, gdb_stdlog); | |
| if (addr || len) | |
| gdb_printf (gdb_stdlog, | |
| " (addr=%s, len=%d, type=%s)", | |
| paddress (target_gdbarch (), addr), len, | |
| type == hw_write ? "data-write" | |
| : (type == hw_read ? "data-read" | |
| : (type == hw_access ? "data-read/write" | |
| : (type == hw_execute ? "instruction-execute" | |
| : "??unknown??")))); | |
| gdb_puts (":\n", gdb_stdlog); | |
| for (i = 0; i < MAX_DEBUG_REGISTER; i++) | |
| gdb_printf (gdb_stdlog, "\tDR%d: lo=%s, hi=%s\n", i, | |
| paddress (target_gdbarch (), | |
| mips_linux_watch_get_watchlo (&watch_mirror, | |
| i)), | |
| paddress (target_gdbarch (), | |
| mips_linux_watch_get_watchhi (&watch_mirror, | |
| i))); | |
| } | |
| /* Target to_can_use_hw_breakpoint implementation. Return 1 if we can | |
| handle the specified watch type. */ | |
| int | |
| mips_linux_nat_target::can_use_hw_breakpoint (enum bptype type, | |
| int cnt, int ot) | |
| { | |
| int i; | |
| uint32_t wanted_mask, irw_mask; | |
| if (!mips_linux_read_watch_registers (inferior_ptid.lwp (), | |
| &watch_readback, | |
| &watch_readback_valid, 0)) | |
| return 0; | |
| switch (type) | |
| { | |
| case bp_hardware_watchpoint: | |
| wanted_mask = W_MASK; | |
| break; | |
| case bp_read_watchpoint: | |
| wanted_mask = R_MASK; | |
| break; | |
| case bp_access_watchpoint: | |
| wanted_mask = R_MASK | W_MASK; | |
| break; | |
| default: | |
| return 0; | |
| } | |
| for (i = 0; | |
| i < mips_linux_watch_get_num_valid (&watch_readback) && cnt; | |
| i++) | |
| { | |
| irw_mask = mips_linux_watch_get_irw_mask (&watch_readback, i); | |
| if ((irw_mask & wanted_mask) == wanted_mask) | |
| cnt--; | |
| } | |
| return (cnt == 0) ? 1 : 0; | |
| } | |
| /* Target to_stopped_by_watchpoint implementation. Return 1 if | |
| stopped by watchpoint. The watchhi R and W bits indicate the watch | |
| register triggered. */ | |
| bool | |
| mips_linux_nat_target::stopped_by_watchpoint () | |
| { | |
| int n; | |
| int num_valid; | |
| if (!mips_linux_read_watch_registers (inferior_ptid.lwp (), | |
| &watch_readback, | |
| &watch_readback_valid, 1)) | |
| return false; | |
| num_valid = mips_linux_watch_get_num_valid (&watch_readback); | |
| for (n = 0; n < MAX_DEBUG_REGISTER && n < num_valid; n++) | |
| if (mips_linux_watch_get_watchhi (&watch_readback, n) & (R_MASK | W_MASK)) | |
| return true; | |
| return false; | |
| } | |
| /* Target to_stopped_data_address implementation. Set the address | |
| where the watch triggered (if known). Return 1 if the address was | |
| known. */ | |
| bool | |
| mips_linux_nat_target::stopped_data_address (CORE_ADDR *paddr) | |
| { | |
| /* On mips we don't know the low order 3 bits of the data address, | |
| so we must return false. */ | |
| return false; | |
| } | |
| /* Target to_region_ok_for_hw_watchpoint implementation. Return 1 if | |
| the specified region can be covered by the watch registers. */ | |
| int | |
| mips_linux_nat_target::region_ok_for_hw_watchpoint (CORE_ADDR addr, int len) | |
| { | |
| struct pt_watch_regs dummy_regs; | |
| int i; | |
| if (!mips_linux_read_watch_registers (inferior_ptid.lwp (), | |
| &watch_readback, | |
| &watch_readback_valid, 0)) | |
| return 0; | |
| dummy_regs = watch_readback; | |
| /* Clear them out. */ | |
| for (i = 0; i < mips_linux_watch_get_num_valid (&dummy_regs); i++) | |
| mips_linux_watch_set_watchlo (&dummy_regs, i, 0); | |
| return mips_linux_watch_try_one_watch (&dummy_regs, addr, len, 0); | |
| } | |
| /* Write the mirrored watch register values for each thread. */ | |
| static int | |
| write_watchpoint_regs (void) | |
| { | |
| for (const lwp_info *lp : all_lwps ()) | |
| { | |
| int tid = lp->ptid.lwp (); | |
| if (ptrace (PTRACE_SET_WATCH_REGS, tid, &watch_mirror, NULL) == -1) | |
| perror_with_name (_("Couldn't write debug register")); | |
| } | |
| return 0; | |
| } | |
| /* linux_nat_target::low_new_thread implementation. Write the | |
| mirrored watch register values for the new thread. */ | |
| void | |
| mips_linux_nat_target::low_new_thread (struct lwp_info *lp) | |
| { | |
| long tid = lp->ptid.lwp (); | |
| if (!mips_linux_read_watch_registers (tid, | |
| &watch_readback, | |
| &watch_readback_valid, 0)) | |
| return; | |
| if (ptrace (PTRACE_SET_WATCH_REGS, tid, &watch_mirror, NULL) == -1) | |
| perror_with_name (_("Couldn't write debug register")); | |
| } | |
| /* Target to_insert_watchpoint implementation. Try to insert a new | |
| watch. Return zero on success. */ | |
| int | |
| mips_linux_nat_target::insert_watchpoint (CORE_ADDR addr, int len, | |
| enum target_hw_bp_type type, | |
| struct expression *cond) | |
| { | |
| struct pt_watch_regs regs; | |
| struct mips_watchpoint *new_watch; | |
| struct mips_watchpoint **pw; | |
| int retval; | |
| if (!mips_linux_read_watch_registers (inferior_ptid.lwp (), | |
| &watch_readback, | |
| &watch_readback_valid, 0)) | |
| return -1; | |
| if (len <= 0) | |
| return -1; | |
| regs = watch_readback; | |
| /* Add the current watches. */ | |
| mips_linux_watch_populate_regs (current_watches, ®s); | |
| /* Now try to add the new watch. */ | |
| if (!mips_linux_watch_try_one_watch (®s, addr, len, | |
| mips_linux_watch_type_to_irw (type))) | |
| return -1; | |
| /* It fit. Stick it on the end of the list. */ | |
| new_watch = XNEW (struct mips_watchpoint); | |
| new_watch->addr = addr; | |
| new_watch->len = len; | |
| new_watch->type = type; | |
| new_watch->next = NULL; | |
| pw = ¤t_watches; | |
| while (*pw != NULL) | |
| pw = &(*pw)->next; | |
| *pw = new_watch; | |
| watch_mirror = regs; | |
| retval = write_watchpoint_regs (); | |
| if (show_debug_regs) | |
| mips_show_dr ("insert_watchpoint", addr, len, type); | |
| return retval; | |
| } | |
| /* Target to_remove_watchpoint implementation. Try to remove a watch. | |
| Return zero on success. */ | |
| int | |
| mips_linux_nat_target::remove_watchpoint (CORE_ADDR addr, int len, | |
| enum target_hw_bp_type type, | |
| struct expression *cond) | |
| { | |
| int retval; | |
| int deleted_one; | |
| struct mips_watchpoint **pw; | |
| struct mips_watchpoint *w; | |
| /* Search for a known watch that matches. Then unlink and free | |
| it. */ | |
| deleted_one = 0; | |
| pw = ¤t_watches; | |
| while ((w = *pw)) | |
| { | |
| if (w->addr == addr && w->len == len && w->type == type) | |
| { | |
| *pw = w->next; | |
| xfree (w); | |
| deleted_one = 1; | |
| break; | |
| } | |
| pw = &(w->next); | |
| } | |
| if (!deleted_one) | |
| return -1; /* We don't know about it, fail doing nothing. */ | |
| /* At this point watch_readback is known to be valid because we | |
| could not have added the watch without reading it. */ | |
| gdb_assert (watch_readback_valid == 1); | |
| watch_mirror = watch_readback; | |
| mips_linux_watch_populate_regs (current_watches, &watch_mirror); | |
| retval = write_watchpoint_regs (); | |
| if (show_debug_regs) | |
| mips_show_dr ("remove_watchpoint", addr, len, type); | |
| return retval; | |
| } | |
| /* Target to_close implementation. Free any watches and call the | |
| super implementation. */ | |
| void | |
| mips_linux_nat_target::close () | |
| { | |
| struct mips_watchpoint *w; | |
| struct mips_watchpoint *nw; | |
| /* Clean out the current_watches list. */ | |
| w = current_watches; | |
| while (w) | |
| { | |
| nw = w->next; | |
| xfree (w); | |
| w = nw; | |
| } | |
| current_watches = NULL; | |
| linux_nat_trad_target::close (); | |
| } | |
| void _initialize_mips_linux_nat (); | |
| void | |
| _initialize_mips_linux_nat () | |
| { | |
| add_setshow_boolean_cmd ("show-debug-regs", class_maintenance, | |
| &show_debug_regs, _("\ | |
| Set whether to show variables that mirror the mips debug registers."), _("\ | |
| Show whether to show variables that mirror the mips debug registers."), _("\ | |
| Use \"on\" to enable, \"off\" to disable.\n\ | |
| If enabled, the debug registers values are shown when GDB inserts\n\ | |
| or removes a hardware breakpoint or watchpoint, and when the inferior\n\ | |
| triggers a breakpoint or watchpoint."), | |
| NULL, | |
| NULL, | |
| &maintenance_set_cmdlist, | |
| &maintenance_show_cmdlist); | |
| linux_target = &the_mips_linux_nat_target; | |
| add_inf_child_target (&the_mips_linux_nat_target); | |
| } |