| /* expr.c -operands, expressions- | |
| Copyright (C) 1987-2023 Free Software Foundation, Inc. | |
| This file is part of GAS, the GNU Assembler. | |
| GAS is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3, or (at your option) | |
| any later version. | |
| GAS is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with GAS; see the file COPYING. If not, write to the Free | |
| Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA | |
| 02110-1301, USA. */ | |
| /* This is really a branch office of as-read.c. I split it out to clearly | |
| distinguish the world of expressions from the world of statements. | |
| (It also gives smaller files to re-compile.) | |
| Here, "operand"s are of expressions, not instructions. */ | |
| #define min(a, b) ((a) < (b) ? (a) : (b)) | |
| #include "as.h" | |
| #include "safe-ctype.h" | |
| #include <limits.h> | |
| #ifndef CHAR_BIT | |
| #define CHAR_BIT 8 | |
| #endif | |
| bool literal_prefix_dollar_hex = false; | |
| static void clean_up_expression (expressionS * expressionP); | |
| /* We keep a mapping of expression symbols to file positions, so that | |
| we can provide better error messages. */ | |
| struct expr_symbol_line { | |
| struct expr_symbol_line *next; | |
| symbolS *sym; | |
| const char *file; | |
| unsigned int line; | |
| }; | |
| static struct expr_symbol_line *expr_symbol_lines; | |
| static const expressionS zero = { .X_op = O_constant }; | |
| /* Build a dummy symbol to hold a complex expression. This is how we | |
| build expressions up out of other expressions. The symbol is put | |
| into the fake section expr_section. */ | |
| symbolS * | |
| make_expr_symbol (const expressionS *expressionP) | |
| { | |
| symbolS *symbolP; | |
| struct expr_symbol_line *n; | |
| if (expressionP->X_op == O_symbol | |
| && expressionP->X_add_number == 0) | |
| return expressionP->X_add_symbol; | |
| if (expressionP->X_op == O_big) | |
| { | |
| /* This won't work, because the actual value is stored in | |
| generic_floating_point_number or generic_bignum, and we are | |
| going to lose it if we haven't already. */ | |
| if (expressionP->X_add_number > 0) | |
| as_bad (_("bignum invalid")); | |
| else | |
| as_bad (_("floating point number invalid")); | |
| expressionP = &zero; | |
| } | |
| /* Putting constant symbols in absolute_section rather than | |
| expr_section is convenient for the old a.out code, for which | |
| S_GET_SEGMENT does not always retrieve the value put in by | |
| S_SET_SEGMENT. */ | |
| symbolP = symbol_create (FAKE_LABEL_NAME, | |
| (expressionP->X_op == O_constant | |
| ? absolute_section | |
| : expressionP->X_op == O_register | |
| ? reg_section | |
| : expr_section), | |
| &zero_address_frag, 0); | |
| symbol_set_value_expression (symbolP, expressionP); | |
| if (expressionP->X_op == O_constant) | |
| resolve_symbol_value (symbolP); | |
| n = notes_alloc (sizeof (*n)); | |
| n->sym = symbolP; | |
| n->file = as_where (&n->line); | |
| n->next = expr_symbol_lines; | |
| expr_symbol_lines = n; | |
| return symbolP; | |
| } | |
| /* Return the file and line number for an expr symbol. Return | |
| non-zero if something was found, 0 if no information is known for | |
| the symbol. */ | |
| int | |
| expr_symbol_where (symbolS *sym, const char **pfile, unsigned int *pline) | |
| { | |
| struct expr_symbol_line *l; | |
| for (l = expr_symbol_lines; l != NULL; l = l->next) | |
| { | |
| if (l->sym == sym) | |
| { | |
| *pfile = l->file; | |
| *pline = l->line; | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* Look up a previously used .startof. / .sizeof. symbol, or make a fresh | |
| one. */ | |
| static symbolS **seen[2]; | |
| static unsigned int nr_seen[2]; | |
| static symbolS * | |
| symbol_lookup_or_make (const char *name, bool start) | |
| { | |
| char *buf = concat (start ? ".startof." : ".sizeof.", name, NULL); | |
| symbolS *symbolP; | |
| unsigned int i; | |
| for (i = 0; i < nr_seen[start]; ++i) | |
| { | |
| symbolP = seen[start][i]; | |
| if (! symbolP) | |
| break; | |
| name = S_GET_NAME (symbolP); | |
| if ((symbols_case_sensitive | |
| ? strcmp (buf, name) | |
| : strcasecmp (buf, name)) == 0) | |
| { | |
| free (buf); | |
| return symbolP; | |
| } | |
| } | |
| symbolP = symbol_make (buf); | |
| free (buf); | |
| if (i >= nr_seen[start]) | |
| { | |
| unsigned int nr = (i + 1) * 2; | |
| seen[start] = XRESIZEVEC (symbolS *, seen[start], nr); | |
| nr_seen[start] = nr; | |
| memset (&seen[start][i + 1], 0, (nr - i - 1) * sizeof(seen[0][0])); | |
| } | |
| seen[start][i] = symbolP; | |
| return symbolP; | |
| } | |
| /* Utilities for building expressions. | |
| Since complex expressions are recorded as symbols for use in other | |
| expressions these return a symbolS * and not an expressionS *. | |
| These explicitly do not take an "add_number" argument. */ | |
| /* ??? For completeness' sake one might want expr_build_symbol. | |
| It would just return its argument. */ | |
| /* Build an expression for an unsigned constant. | |
| The corresponding one for signed constants is missing because | |
| there's currently no need for it. One could add an unsigned_p flag | |
| but that seems more clumsy. */ | |
| symbolS * | |
| expr_build_uconstant (offsetT value) | |
| { | |
| expressionS e; | |
| e.X_op = O_constant; | |
| e.X_add_number = value; | |
| e.X_unsigned = 1; | |
| e.X_extrabit = 0; | |
| return make_expr_symbol (&e); | |
| } | |
| /* Build an expression for the current location ('.'). */ | |
| symbolS * | |
| expr_build_dot (void) | |
| { | |
| expressionS e; | |
| current_location (&e); | |
| return symbol_clone_if_forward_ref (make_expr_symbol (&e)); | |
| } | |
| /* Build any floating-point literal here. | |
| Also build any bignum literal here. */ | |
| /* Seems atof_machine can backscan through generic_bignum and hit whatever | |
| happens to be loaded before it in memory. And its way too complicated | |
| for me to fix right. Thus a hack. JF: Just make generic_bignum bigger, | |
| and never write into the early words, thus they'll always be zero. | |
| I hate Dean's floating-point code. Bleh. */ | |
| LITTLENUM_TYPE generic_bignum[SIZE_OF_LARGE_NUMBER + 6]; | |
| FLONUM_TYPE generic_floating_point_number = { | |
| &generic_bignum[6], /* low. (JF: Was 0) */ | |
| &generic_bignum[SIZE_OF_LARGE_NUMBER + 6 - 1], /* high. JF: (added +6) */ | |
| 0, /* leader. */ | |
| 0, /* exponent. */ | |
| 0 /* sign. */ | |
| }; | |
| static void | |
| floating_constant (expressionS *expressionP) | |
| { | |
| /* input_line_pointer -> floating-point constant. */ | |
| int error_code; | |
| error_code = atof_generic (&input_line_pointer, ".", EXP_CHARS, | |
| &generic_floating_point_number); | |
| if (error_code) | |
| { | |
| if (error_code == ERROR_EXPONENT_OVERFLOW) | |
| { | |
| as_bad (_("bad floating-point constant: exponent overflow")); | |
| } | |
| else | |
| { | |
| as_bad (_("bad floating-point constant: unknown error code=%d"), | |
| error_code); | |
| } | |
| } | |
| expressionP->X_op = O_big; | |
| /* input_line_pointer -> just after constant, which may point to | |
| whitespace. */ | |
| expressionP->X_add_number = -1; | |
| } | |
| uint32_t | |
| generic_bignum_to_int32 (void) | |
| { | |
| return ((((uint32_t) generic_bignum[1] & LITTLENUM_MASK) | |
| << LITTLENUM_NUMBER_OF_BITS) | |
| | ((uint32_t) generic_bignum[0] & LITTLENUM_MASK)); | |
| } | |
| uint64_t | |
| generic_bignum_to_int64 (void) | |
| { | |
| return ((((((((uint64_t) generic_bignum[3] & LITTLENUM_MASK) | |
| << LITTLENUM_NUMBER_OF_BITS) | |
| | ((uint64_t) generic_bignum[2] & LITTLENUM_MASK)) | |
| << LITTLENUM_NUMBER_OF_BITS) | |
| | ((uint64_t) generic_bignum[1] & LITTLENUM_MASK)) | |
| << LITTLENUM_NUMBER_OF_BITS) | |
| | ((uint64_t) generic_bignum[0] & LITTLENUM_MASK)); | |
| } | |
| static void | |
| integer_constant (int radix, expressionS *expressionP) | |
| { | |
| char *start; /* Start of number. */ | |
| char *suffix = NULL; | |
| char c; | |
| valueT number; /* Offset or (absolute) value. */ | |
| short int digit; /* Value of next digit in current radix. */ | |
| short int maxdig = 0; /* Highest permitted digit value. */ | |
| int too_many_digits = 0; /* If we see >= this number of. */ | |
| char *name; /* Points to name of symbol. */ | |
| symbolS *symbolP; /* Points to symbol. */ | |
| int small; /* True if fits in 32 bits. */ | |
| /* May be bignum, or may fit in 32 bits. */ | |
| /* Most numbers fit into 32 bits, and we want this case to be fast. | |
| so we pretend it will fit into 32 bits. If, after making up a 32 | |
| bit number, we realise that we have scanned more digits than | |
| comfortably fit into 32 bits, we re-scan the digits coding them | |
| into a bignum. For decimal and octal numbers we are | |
| conservative: Some numbers may be assumed bignums when in fact | |
| they do fit into 32 bits. Numbers of any radix can have excess | |
| leading zeros: We strive to recognise this and cast them back | |
| into 32 bits. We must check that the bignum really is more than | |
| 32 bits, and change it back to a 32-bit number if it fits. The | |
| number we are looking for is expected to be positive, but if it | |
| fits into 32 bits as an unsigned number, we let it be a 32-bit | |
| number. The cavalier approach is for speed in ordinary cases. */ | |
| /* This has been extended for 64 bits. We blindly assume that if | |
| you're compiling in 64-bit mode, the target is a 64-bit machine. | |
| This should be cleaned up. */ | |
| #ifdef BFD64 | |
| #define valuesize 64 | |
| #else /* includes non-bfd case, mostly */ | |
| #define valuesize 32 | |
| #endif | |
| if (is_end_of_line[(unsigned char) *input_line_pointer]) | |
| { | |
| expressionP->X_op = O_absent; | |
| return; | |
| } | |
| if ((NUMBERS_WITH_SUFFIX || flag_m68k_mri) && radix == 0) | |
| { | |
| int flt = 0; | |
| /* In MRI mode, the number may have a suffix indicating the | |
| radix. For that matter, it might actually be a floating | |
| point constant. */ | |
| for (suffix = input_line_pointer; ISALNUM (*suffix); suffix++) | |
| { | |
| if (*suffix == 'e' || *suffix == 'E') | |
| flt = 1; | |
| } | |
| if (suffix == input_line_pointer) | |
| { | |
| radix = 10; | |
| suffix = NULL; | |
| } | |
| else | |
| { | |
| c = *--suffix; | |
| c = TOUPPER (c); | |
| /* If we have both NUMBERS_WITH_SUFFIX and LOCAL_LABELS_FB, | |
| we distinguish between 'B' and 'b'. This is the case for | |
| Z80. */ | |
| if ((NUMBERS_WITH_SUFFIX && LOCAL_LABELS_FB ? *suffix : c) == 'B') | |
| radix = 2; | |
| else if (c == 'D') | |
| radix = 10; | |
| else if (c == 'O' || c == 'Q') | |
| radix = 8; | |
| else if (c == 'H') | |
| radix = 16; | |
| else if (suffix[1] == '.' || c == 'E' || flt) | |
| { | |
| floating_constant (expressionP); | |
| return; | |
| } | |
| else | |
| { | |
| radix = 10; | |
| suffix = NULL; | |
| } | |
| } | |
| } | |
| switch (radix) | |
| { | |
| case 2: | |
| maxdig = 2; | |
| too_many_digits = valuesize + 1; | |
| break; | |
| case 8: | |
| maxdig = radix = 8; | |
| too_many_digits = (valuesize + 2) / 3 + 1; | |
| break; | |
| case 16: | |
| maxdig = radix = 16; | |
| too_many_digits = (valuesize + 3) / 4 + 1; | |
| break; | |
| case 10: | |
| maxdig = radix = 10; | |
| too_many_digits = (valuesize + 11) / 4; /* Very rough. */ | |
| } | |
| #undef valuesize | |
| start = input_line_pointer; | |
| c = *input_line_pointer++; | |
| for (number = 0; | |
| (digit = hex_value (c)) < maxdig; | |
| c = *input_line_pointer++) | |
| { | |
| number = number * radix + digit; | |
| } | |
| /* c contains character after number. */ | |
| /* input_line_pointer->char after c. */ | |
| small = (input_line_pointer - start - 1) < too_many_digits; | |
| if (radix == 16 && c == '_') | |
| { | |
| /* This is literal of the form 0x333_0_12345678_1. | |
| This example is equivalent to 0x00000333000000001234567800000001. */ | |
| int num_little_digits = 0; | |
| int i; | |
| input_line_pointer = start; /* -> 1st digit. */ | |
| know (LITTLENUM_NUMBER_OF_BITS == 16); | |
| for (c = '_'; c == '_'; num_little_digits += 2) | |
| { | |
| /* Convert one 64-bit word. */ | |
| int ndigit = 0; | |
| number = 0; | |
| for (c = *input_line_pointer++; | |
| (digit = hex_value (c)) < maxdig; | |
| c = *(input_line_pointer++)) | |
| { | |
| number = number * radix + digit; | |
| ndigit++; | |
| } | |
| /* Check for 8 digit per word max. */ | |
| if (ndigit > 8) | |
| as_bad (_("a bignum with underscores may not have more than 8 hex digits in any word")); | |
| /* Add this chunk to the bignum. | |
| Shift things down 2 little digits. */ | |
| know (LITTLENUM_NUMBER_OF_BITS == 16); | |
| for (i = min (num_little_digits + 1, SIZE_OF_LARGE_NUMBER - 1); | |
| i >= 2; | |
| i--) | |
| generic_bignum[i] = generic_bignum[i - 2]; | |
| /* Add the new digits as the least significant new ones. */ | |
| generic_bignum[0] = number & 0xffffffff; | |
| generic_bignum[1] = number >> 16; | |
| } | |
| /* Again, c is char after number, input_line_pointer->after c. */ | |
| if (num_little_digits > SIZE_OF_LARGE_NUMBER - 1) | |
| num_little_digits = SIZE_OF_LARGE_NUMBER - 1; | |
| gas_assert (num_little_digits >= 4); | |
| if (num_little_digits != 8) | |
| as_bad (_("a bignum with underscores must have exactly 4 words")); | |
| /* We might have some leading zeros. These can be trimmed to give | |
| us a change to fit this constant into a small number. */ | |
| while (generic_bignum[num_little_digits - 1] == 0 | |
| && num_little_digits > 1) | |
| num_little_digits--; | |
| if (num_little_digits <= 2) | |
| { | |
| /* will fit into 32 bits. */ | |
| number = generic_bignum_to_int32 (); | |
| small = 1; | |
| } | |
| #ifdef BFD64 | |
| else if (num_little_digits <= 4) | |
| { | |
| /* Will fit into 64 bits. */ | |
| number = generic_bignum_to_int64 (); | |
| small = 1; | |
| } | |
| #endif | |
| else | |
| { | |
| small = 0; | |
| /* Number of littlenums in the bignum. */ | |
| number = num_little_digits; | |
| } | |
| } | |
| else if (!small) | |
| { | |
| /* We saw a lot of digits. manufacture a bignum the hard way. */ | |
| LITTLENUM_TYPE *leader; /* -> high order littlenum of the bignum. */ | |
| LITTLENUM_TYPE *pointer; /* -> littlenum we are frobbing now. */ | |
| long carry; | |
| leader = generic_bignum; | |
| generic_bignum[0] = 0; | |
| generic_bignum[1] = 0; | |
| generic_bignum[2] = 0; | |
| generic_bignum[3] = 0; | |
| input_line_pointer = start; /* -> 1st digit. */ | |
| c = *input_line_pointer++; | |
| for (; (carry = hex_value (c)) < maxdig; c = *input_line_pointer++) | |
| { | |
| for (pointer = generic_bignum; pointer <= leader; pointer++) | |
| { | |
| long work; | |
| work = carry + radix * *pointer; | |
| *pointer = work & LITTLENUM_MASK; | |
| carry = work >> LITTLENUM_NUMBER_OF_BITS; | |
| } | |
| if (carry) | |
| { | |
| if (leader < generic_bignum + SIZE_OF_LARGE_NUMBER - 1) | |
| { | |
| /* Room to grow a longer bignum. */ | |
| *++leader = carry; | |
| } | |
| } | |
| } | |
| /* Again, c is char after number. */ | |
| /* input_line_pointer -> after c. */ | |
| know (LITTLENUM_NUMBER_OF_BITS == 16); | |
| if (leader < generic_bignum + 2) | |
| { | |
| /* Will fit into 32 bits. */ | |
| number = generic_bignum_to_int32 (); | |
| small = 1; | |
| } | |
| #ifdef BFD64 | |
| else if (leader < generic_bignum + 4) | |
| { | |
| /* Will fit into 64 bits. */ | |
| number = generic_bignum_to_int64 (); | |
| small = 1; | |
| } | |
| #endif | |
| else | |
| { | |
| /* Number of littlenums in the bignum. */ | |
| number = leader - generic_bignum + 1; | |
| } | |
| } | |
| if ((NUMBERS_WITH_SUFFIX || flag_m68k_mri) | |
| && suffix != NULL | |
| && input_line_pointer - 1 == suffix) | |
| c = *input_line_pointer++; | |
| #ifndef tc_allow_U_suffix | |
| #define tc_allow_U_suffix 1 | |
| #endif | |
| /* PR 19910: Look for, and ignore, a U suffix to the number. */ | |
| if (tc_allow_U_suffix && (c == 'U' || c == 'u')) | |
| c = * input_line_pointer++; | |
| #ifndef tc_allow_L_suffix | |
| #define tc_allow_L_suffix 1 | |
| #endif | |
| /* PR 20732: Look for, and ignore, a L or LL suffix to the number. */ | |
| if (tc_allow_L_suffix) | |
| while (c == 'L' || c == 'l') | |
| c = * input_line_pointer++; | |
| if (small) | |
| { | |
| /* Here with number, in correct radix. c is the next char. | |
| Note that unlike un*x, we allow "011f" "0x9f" to both mean | |
| the same as the (conventional) "9f". | |
| This is simply easier than checking for strict canonical | |
| form. Syntax sux! */ | |
| if (LOCAL_LABELS_FB && c == 'b') | |
| { | |
| /* Backward ref to local label. | |
| Because it is backward, expect it to be defined. */ | |
| /* Construct a local label. */ | |
| name = fb_label_name (number, 0); | |
| /* Seen before, or symbol is defined: OK. */ | |
| symbolP = symbol_find (name); | |
| if ((symbolP != NULL) && (S_IS_DEFINED (symbolP))) | |
| { | |
| expressionP->X_op = O_symbol; | |
| expressionP->X_add_symbol = symbolP; | |
| } | |
| else | |
| { | |
| /* Either not seen or not defined. */ | |
| /* @@ Should print out the original string instead of | |
| the parsed number. */ | |
| as_bad (_("backward ref to unknown label \"%d:\""), | |
| (int) number); | |
| expressionP->X_op = O_constant; | |
| } | |
| expressionP->X_add_number = 0; | |
| } /* case 'b' */ | |
| else if (LOCAL_LABELS_FB && c == 'f') | |
| { | |
| /* Forward reference. Expect symbol to be undefined or | |
| unknown. undefined: seen it before. unknown: never seen | |
| it before. | |
| Construct a local label name, then an undefined symbol. | |
| Don't create a xseg frag for it: caller may do that. | |
| Just return it as never seen before. */ | |
| name = fb_label_name (number, 1); | |
| symbolP = symbol_find_or_make (name); | |
| /* We have no need to check symbol properties. */ | |
| expressionP->X_op = O_symbol; | |
| expressionP->X_add_symbol = symbolP; | |
| expressionP->X_add_number = 0; | |
| } /* case 'f' */ | |
| else if (LOCAL_LABELS_DOLLAR && c == '$') | |
| { | |
| /* If the dollar label is *currently* defined, then this is just | |
| another reference to it. If it is not *currently* defined, | |
| then this is a fresh instantiation of that number, so create | |
| it. */ | |
| if (dollar_label_defined (number)) | |
| { | |
| name = dollar_label_name (number, 0); | |
| symbolP = symbol_find (name); | |
| know (symbolP != NULL); | |
| } | |
| else | |
| { | |
| name = dollar_label_name (number, 1); | |
| symbolP = symbol_find_or_make (name); | |
| } | |
| expressionP->X_op = O_symbol; | |
| expressionP->X_add_symbol = symbolP; | |
| expressionP->X_add_number = 0; | |
| } /* case '$' */ | |
| else | |
| { | |
| expressionP->X_op = O_constant; | |
| expressionP->X_add_number = number; | |
| input_line_pointer--; /* Restore following character. */ | |
| } /* Really just a number. */ | |
| } | |
| else | |
| { | |
| /* Not a small number. */ | |
| expressionP->X_op = O_big; | |
| expressionP->X_add_number = number; /* Number of littlenums. */ | |
| input_line_pointer--; /* -> char following number. */ | |
| } | |
| } | |
| /* Parse an MRI multi character constant. */ | |
| static void | |
| mri_char_constant (expressionS *expressionP) | |
| { | |
| int i; | |
| if (*input_line_pointer == '\'' | |
| && input_line_pointer[1] != '\'') | |
| { | |
| expressionP->X_op = O_constant; | |
| expressionP->X_add_number = 0; | |
| return; | |
| } | |
| /* In order to get the correct byte ordering, we must build the | |
| number in reverse. */ | |
| for (i = SIZE_OF_LARGE_NUMBER - 1; i >= 0; i--) | |
| { | |
| int j; | |
| generic_bignum[i] = 0; | |
| for (j = 0; j < CHARS_PER_LITTLENUM; j++) | |
| { | |
| if (*input_line_pointer == '\'') | |
| { | |
| if (input_line_pointer[1] != '\'') | |
| break; | |
| ++input_line_pointer; | |
| } | |
| generic_bignum[i] <<= 8; | |
| generic_bignum[i] += *input_line_pointer; | |
| ++input_line_pointer; | |
| } | |
| if (i < SIZE_OF_LARGE_NUMBER - 1) | |
| { | |
| /* If there is more than one littlenum, left justify the | |
| last one to make it match the earlier ones. If there is | |
| only one, we can just use the value directly. */ | |
| for (; j < CHARS_PER_LITTLENUM; j++) | |
| generic_bignum[i] <<= 8; | |
| } | |
| if (*input_line_pointer == '\'' | |
| && input_line_pointer[1] != '\'') | |
| break; | |
| } | |
| if (i < 0) | |
| { | |
| as_bad (_("character constant too large")); | |
| i = 0; | |
| } | |
| if (i > 0) | |
| { | |
| int c; | |
| int j; | |
| c = SIZE_OF_LARGE_NUMBER - i; | |
| for (j = 0; j < c; j++) | |
| generic_bignum[j] = generic_bignum[i + j]; | |
| i = c; | |
| } | |
| know (LITTLENUM_NUMBER_OF_BITS == 16); | |
| if (i > 2) | |
| { | |
| expressionP->X_op = O_big; | |
| expressionP->X_add_number = i; | |
| } | |
| else | |
| { | |
| expressionP->X_op = O_constant; | |
| if (i < 2) | |
| expressionP->X_add_number = generic_bignum[0] & LITTLENUM_MASK; | |
| else | |
| expressionP->X_add_number = | |
| (((generic_bignum[1] & LITTLENUM_MASK) | |
| << LITTLENUM_NUMBER_OF_BITS) | |
| | (generic_bignum[0] & LITTLENUM_MASK)); | |
| } | |
| /* Skip the final closing quote. */ | |
| ++input_line_pointer; | |
| } | |
| /* Return an expression representing the current location. This | |
| handles the magic symbol `.'. */ | |
| void | |
| current_location (expressionS *expressionp) | |
| { | |
| if (now_seg == absolute_section) | |
| { | |
| expressionp->X_op = O_constant; | |
| expressionp->X_add_number = abs_section_offset; | |
| } | |
| else | |
| { | |
| expressionp->X_op = O_symbol; | |
| expressionp->X_add_symbol = &dot_symbol; | |
| expressionp->X_add_number = 0; | |
| } | |
| } | |
| #ifndef md_register_arithmetic | |
| # define md_register_arithmetic 1 | |
| #endif | |
| /* In: Input_line_pointer points to 1st char of operand, which may | |
| be a space. | |
| Out: An expressionS. | |
| The operand may have been empty: in this case X_op == O_absent. | |
| Input_line_pointer->(next non-blank) char after operand. */ | |
| static segT | |
| operand (expressionS *expressionP, enum expr_mode mode) | |
| { | |
| char c; | |
| symbolS *symbolP; /* Points to symbol. */ | |
| char *name; /* Points to name of symbol. */ | |
| segT segment; | |
| operatorT op = O_absent; /* For unary operators. */ | |
| /* All integers are regarded as unsigned unless they are negated. | |
| This is because the only thing which cares whether a number is | |
| unsigned is the code in emit_expr which extends constants into | |
| bignums. It should only sign extend negative numbers, so that | |
| something like ``.quad 0x80000000'' is not sign extended even | |
| though it appears negative if valueT is 32 bits. */ | |
| expressionP->X_unsigned = 1; | |
| expressionP->X_extrabit = 0; | |
| /* Digits, assume it is a bignum. */ | |
| SKIP_WHITESPACE (); /* Leading whitespace is part of operand. */ | |
| c = *input_line_pointer++; /* input_line_pointer -> past char in c. */ | |
| if (is_end_of_line[(unsigned char) c]) | |
| goto eol; | |
| switch (c) | |
| { | |
| case '1': | |
| case '2': | |
| case '3': | |
| case '4': | |
| case '5': | |
| case '6': | |
| case '7': | |
| case '8': | |
| case '9': | |
| input_line_pointer--; | |
| integer_constant ((NUMBERS_WITH_SUFFIX || flag_m68k_mri) | |
| ? 0 : 10, | |
| expressionP); | |
| break; | |
| #ifdef LITERAL_PREFIXPERCENT_BIN | |
| case '%': | |
| integer_constant (2, expressionP); | |
| break; | |
| #endif | |
| case '0': | |
| /* Non-decimal radix. */ | |
| if (NUMBERS_WITH_SUFFIX || flag_m68k_mri) | |
| { | |
| char *s; | |
| /* Check for a hex or float constant. */ | |
| for (s = input_line_pointer; hex_p (*s); s++) | |
| ; | |
| if (*s == 'h' || *s == 'H' || *input_line_pointer == '.') | |
| { | |
| --input_line_pointer; | |
| integer_constant (0, expressionP); | |
| break; | |
| } | |
| } | |
| c = *input_line_pointer; | |
| switch (c) | |
| { | |
| case 'o': | |
| case 'O': | |
| case 'q': | |
| case 'Q': | |
| case '8': | |
| case '9': | |
| if (NUMBERS_WITH_SUFFIX || flag_m68k_mri) | |
| { | |
| integer_constant (0, expressionP); | |
| break; | |
| } | |
| /* Fall through. */ | |
| default: | |
| default_case: | |
| if (c && strchr (FLT_CHARS, c)) | |
| { | |
| input_line_pointer++; | |
| floating_constant (expressionP); | |
| expressionP->X_add_number = - TOLOWER (c); | |
| } | |
| else | |
| { | |
| /* The string was only zero. */ | |
| expressionP->X_op = O_constant; | |
| expressionP->X_add_number = 0; | |
| } | |
| break; | |
| case 'x': | |
| case 'X': | |
| if (flag_m68k_mri) | |
| goto default_case; | |
| input_line_pointer++; | |
| integer_constant (16, expressionP); | |
| break; | |
| case 'b': | |
| if (LOCAL_LABELS_FB && !flag_m68k_mri | |
| && input_line_pointer[1] != '0' | |
| && input_line_pointer[1] != '1') | |
| { | |
| /* Parse this as a back reference to label 0. */ | |
| input_line_pointer--; | |
| integer_constant (10, expressionP); | |
| break; | |
| } | |
| /* Otherwise, parse this as a binary number. */ | |
| /* Fall through. */ | |
| case 'B': | |
| if (input_line_pointer[1] == '0' | |
| || input_line_pointer[1] == '1') | |
| { | |
| input_line_pointer++; | |
| integer_constant (2, expressionP); | |
| break; | |
| } | |
| if (flag_m68k_mri || NUMBERS_WITH_SUFFIX) | |
| input_line_pointer++; | |
| goto default_case; | |
| case '0': | |
| case '1': | |
| case '2': | |
| case '3': | |
| case '4': | |
| case '5': | |
| case '6': | |
| case '7': | |
| integer_constant ((flag_m68k_mri || NUMBERS_WITH_SUFFIX) | |
| ? 0 : 8, | |
| expressionP); | |
| break; | |
| case 'f': | |
| if (LOCAL_LABELS_FB) | |
| { | |
| int is_label = 1; | |
| /* If it says "0f" and it could possibly be a floating point | |
| number, make it one. Otherwise, make it a local label, | |
| and try to deal with parsing the rest later. */ | |
| if (!is_end_of_line[(unsigned char) input_line_pointer[1]] | |
| && strchr (FLT_CHARS, 'f') != NULL) | |
| { | |
| char *cp = input_line_pointer + 1; | |
| atof_generic (&cp, ".", EXP_CHARS, | |
| &generic_floating_point_number); | |
| /* Was nothing parsed, or does it look like an | |
| expression? */ | |
| is_label = (cp == input_line_pointer + 1 | |
| || (cp == input_line_pointer + 2 | |
| && (cp[-1] == '-' || cp[-1] == '+')) | |
| || *cp == 'f' | |
| || *cp == 'b'); | |
| } | |
| if (is_label) | |
| { | |
| input_line_pointer--; | |
| integer_constant (10, expressionP); | |
| break; | |
| } | |
| } | |
| /* Fall through. */ | |
| case 'd': | |
| case 'D': | |
| if (flag_m68k_mri || NUMBERS_WITH_SUFFIX) | |
| { | |
| integer_constant (0, expressionP); | |
| break; | |
| } | |
| /* Fall through. */ | |
| case 'F': | |
| case 'r': | |
| case 'e': | |
| case 'E': | |
| case 'g': | |
| case 'G': | |
| input_line_pointer++; | |
| floating_constant (expressionP); | |
| expressionP->X_add_number = - TOLOWER (c); | |
| break; | |
| case '$': | |
| if (LOCAL_LABELS_DOLLAR) | |
| { | |
| integer_constant (10, expressionP); | |
| break; | |
| } | |
| else | |
| goto default_case; | |
| } | |
| break; | |
| #ifndef NEED_INDEX_OPERATOR | |
| case '[': | |
| # ifdef md_need_index_operator | |
| if (md_need_index_operator()) | |
| goto de_fault; | |
| # endif | |
| #endif | |
| /* Fall through. */ | |
| case '(': | |
| /* Didn't begin with digit & not a name. */ | |
| segment = expr (0, expressionP, mode); | |
| /* expression () will pass trailing whitespace. */ | |
| if ((c == '(' && *input_line_pointer != ')') | |
| || (c == '[' && *input_line_pointer != ']')) | |
| { | |
| if (* input_line_pointer) | |
| as_bad (_("found '%c', expected: '%c'"), | |
| * input_line_pointer, c == '(' ? ')' : ']'); | |
| else | |
| as_bad (_("missing '%c'"), c == '(' ? ')' : ']'); | |
| } | |
| else | |
| input_line_pointer++; | |
| SKIP_ALL_WHITESPACE (); | |
| /* Here with input_line_pointer -> char after "(...)". */ | |
| return segment; | |
| #ifdef TC_M68K | |
| case 'E': | |
| if (! flag_m68k_mri || *input_line_pointer != '\'') | |
| goto de_fault; | |
| as_bad (_("EBCDIC constants are not supported")); | |
| /* Fall through. */ | |
| case 'A': | |
| if (! flag_m68k_mri || *input_line_pointer != '\'') | |
| goto de_fault; | |
| ++input_line_pointer; | |
| #endif | |
| /* Fall through. */ | |
| case '\'': | |
| if (! flag_m68k_mri) | |
| { | |
| /* Warning: to conform to other people's assemblers NO | |
| ESCAPEMENT is permitted for a single quote. The next | |
| character, parity errors and all, is taken as the value | |
| of the operand. VERY KINKY. */ | |
| expressionP->X_op = O_constant; | |
| expressionP->X_add_number = *input_line_pointer++; | |
| break; | |
| } | |
| mri_char_constant (expressionP); | |
| break; | |
| #ifdef TC_M68K | |
| case '"': | |
| /* Double quote is the bitwise not operator in MRI mode. */ | |
| if (! flag_m68k_mri) | |
| goto de_fault; | |
| #endif | |
| /* Fall through. */ | |
| case '~': | |
| /* '~' is permitted to start a label on the Delta. */ | |
| if (is_name_beginner (c)) | |
| goto isname; | |
| op = O_bit_not; | |
| goto unary; | |
| case '!': | |
| op = O_logical_not; | |
| goto unary; | |
| case '-': | |
| op = O_uminus; | |
| /* Fall through. */ | |
| case '+': | |
| { | |
| unary: | |
| operand (expressionP, mode); | |
| #ifdef md_optimize_expr | |
| if (md_optimize_expr (NULL, op, expressionP)) | |
| { | |
| /* Skip. */ | |
| ; | |
| } | |
| else | |
| #endif | |
| if (expressionP->X_op == O_constant) | |
| { | |
| /* input_line_pointer -> char after operand. */ | |
| if (op == O_uminus) | |
| { | |
| expressionP->X_add_number | |
| = - (addressT) expressionP->X_add_number; | |
| /* Notice: '-' may overflow: no warning is given. | |
| This is compatible with other people's | |
| assemblers. Sigh. */ | |
| expressionP->X_unsigned = 0; | |
| if (expressionP->X_add_number) | |
| expressionP->X_extrabit ^= 1; | |
| } | |
| else if (op == O_bit_not) | |
| { | |
| expressionP->X_add_number = ~ expressionP->X_add_number; | |
| expressionP->X_extrabit ^= 1; | |
| expressionP->X_unsigned = 0; | |
| } | |
| else if (op == O_logical_not) | |
| { | |
| expressionP->X_add_number = ! expressionP->X_add_number; | |
| expressionP->X_unsigned = 1; | |
| expressionP->X_extrabit = 0; | |
| } | |
| } | |
| else if (expressionP->X_op == O_big | |
| && expressionP->X_add_number <= 0 | |
| && op == O_uminus | |
| && (generic_floating_point_number.sign == '+' | |
| || generic_floating_point_number.sign == 'P')) | |
| { | |
| /* Negative flonum (eg, -1.000e0). */ | |
| if (generic_floating_point_number.sign == '+') | |
| generic_floating_point_number.sign = '-'; | |
| else | |
| generic_floating_point_number.sign = 'N'; | |
| } | |
| else if (expressionP->X_op == O_big | |
| && expressionP->X_add_number > 0) | |
| { | |
| int i; | |
| if (op == O_uminus || op == O_bit_not) | |
| { | |
| for (i = 0; i < expressionP->X_add_number; ++i) | |
| generic_bignum[i] = ~generic_bignum[i]; | |
| /* Extend the bignum to at least the size of .octa. */ | |
| if (expressionP->X_add_number < SIZE_OF_LARGE_NUMBER) | |
| { | |
| expressionP->X_add_number = SIZE_OF_LARGE_NUMBER; | |
| for (; i < expressionP->X_add_number; ++i) | |
| generic_bignum[i] = ~(LITTLENUM_TYPE) 0; | |
| } | |
| if (op == O_uminus) | |
| for (i = 0; i < expressionP->X_add_number; ++i) | |
| { | |
| generic_bignum[i] += 1; | |
| if (generic_bignum[i]) | |
| break; | |
| } | |
| } | |
| else if (op == O_logical_not) | |
| { | |
| for (i = 0; i < expressionP->X_add_number; ++i) | |
| if (generic_bignum[i] != 0) | |
| break; | |
| expressionP->X_add_number = i >= expressionP->X_add_number; | |
| expressionP->X_op = O_constant; | |
| expressionP->X_unsigned = 1; | |
| expressionP->X_extrabit = 0; | |
| } | |
| } | |
| else if (expressionP->X_op != O_illegal | |
| && expressionP->X_op != O_absent) | |
| { | |
| if (op != O_absent) | |
| { | |
| expressionP->X_add_symbol = make_expr_symbol (expressionP); | |
| expressionP->X_op = op; | |
| expressionP->X_add_number = 0; | |
| } | |
| else if (!md_register_arithmetic && expressionP->X_op == O_register) | |
| { | |
| /* Convert to binary '+'. */ | |
| expressionP->X_op_symbol = make_expr_symbol (expressionP); | |
| expressionP->X_add_symbol = make_expr_symbol (&zero); | |
| expressionP->X_add_number = 0; | |
| expressionP->X_op = O_add; | |
| } | |
| } | |
| else | |
| as_warn (_("Unary operator %c ignored because bad operand follows"), | |
| c); | |
| } | |
| break; | |
| #if !defined (DOLLAR_DOT) && !defined (TC_M68K) | |
| case '$': | |
| if (literal_prefix_dollar_hex) | |
| { | |
| /* $L is the start of a local label, not a hex constant. */ | |
| if (* input_line_pointer == 'L') | |
| goto isname; | |
| integer_constant (16, expressionP); | |
| } | |
| else | |
| { | |
| goto isname; | |
| } | |
| break; | |
| #else | |
| case '$': | |
| /* '$' is the program counter when in MRI mode, or when | |
| DOLLAR_DOT is defined. */ | |
| #ifndef DOLLAR_DOT | |
| if (! flag_m68k_mri) | |
| goto de_fault; | |
| #endif | |
| if (DOLLAR_AMBIGU && hex_p (*input_line_pointer)) | |
| { | |
| /* In MRI mode and on Z80, '$' is also used as the prefix | |
| for a hexadecimal constant. */ | |
| integer_constant (16, expressionP); | |
| break; | |
| } | |
| if (is_part_of_name (*input_line_pointer)) | |
| goto isname; | |
| current_location (expressionP); | |
| break; | |
| #endif | |
| case '.': | |
| if (!is_part_of_name (*input_line_pointer)) | |
| { | |
| current_location (expressionP); | |
| break; | |
| } | |
| else if ((strncasecmp (input_line_pointer, "startof.", 8) == 0 | |
| && ! is_part_of_name (input_line_pointer[8])) | |
| || (strncasecmp (input_line_pointer, "sizeof.", 7) == 0 | |
| && ! is_part_of_name (input_line_pointer[7]))) | |
| { | |
| int start; | |
| start = (input_line_pointer[1] == 't' | |
| || input_line_pointer[1] == 'T'); | |
| input_line_pointer += start ? 8 : 7; | |
| SKIP_WHITESPACE (); | |
| /* Cover for the as_bad () invocations below. */ | |
| expressionP->X_op = O_absent; | |
| if (*input_line_pointer != '(') | |
| as_bad (_("syntax error in .startof. or .sizeof.")); | |
| else | |
| { | |
| ++input_line_pointer; | |
| SKIP_WHITESPACE (); | |
| c = get_symbol_name (& name); | |
| if (! *name) | |
| { | |
| as_bad (_("expected symbol name")); | |
| (void) restore_line_pointer (c); | |
| if (c == ')') | |
| ++input_line_pointer; | |
| break; | |
| } | |
| expressionP->X_op = O_symbol; | |
| expressionP->X_add_symbol = symbol_lookup_or_make (name, start); | |
| expressionP->X_add_number = 0; | |
| *input_line_pointer = c; | |
| SKIP_WHITESPACE_AFTER_NAME (); | |
| if (*input_line_pointer != ')') | |
| as_bad (_("syntax error in .startof. or .sizeof.")); | |
| else | |
| ++input_line_pointer; | |
| } | |
| break; | |
| } | |
| else | |
| { | |
| goto isname; | |
| } | |
| case ',': | |
| eol: | |
| /* Can't imagine any other kind of operand. */ | |
| expressionP->X_op = O_absent; | |
| input_line_pointer--; | |
| break; | |
| #ifdef TC_M68K | |
| case '%': | |
| if (! flag_m68k_mri) | |
| goto de_fault; | |
| integer_constant (2, expressionP); | |
| break; | |
| case '@': | |
| if (! flag_m68k_mri) | |
| goto de_fault; | |
| integer_constant (8, expressionP); | |
| break; | |
| case ':': | |
| if (! flag_m68k_mri) | |
| goto de_fault; | |
| /* In MRI mode, this is a floating point constant represented | |
| using hexadecimal digits. */ | |
| ++input_line_pointer; | |
| integer_constant (16, expressionP); | |
| break; | |
| case '*': | |
| if (! flag_m68k_mri || is_part_of_name (*input_line_pointer)) | |
| goto de_fault; | |
| current_location (expressionP); | |
| break; | |
| #endif | |
| default: | |
| #if defined(md_need_index_operator) || defined(TC_M68K) | |
| de_fault: | |
| #endif | |
| if (is_name_beginner (c) || c == '"') /* Here if did not begin with a digit. */ | |
| { | |
| /* Identifier begins here. | |
| This is kludged for speed, so code is repeated. */ | |
| isname: | |
| -- input_line_pointer; | |
| c = get_symbol_name (&name); | |
| #ifdef md_operator | |
| { | |
| op = md_operator (name, 1, &c); | |
| switch (op) | |
| { | |
| case O_uminus: | |
| restore_line_pointer (c); | |
| c = '-'; | |
| goto unary; | |
| case O_bit_not: | |
| restore_line_pointer (c); | |
| c = '~'; | |
| goto unary; | |
| case O_logical_not: | |
| restore_line_pointer (c); | |
| c = '!'; | |
| goto unary; | |
| case O_illegal: | |
| as_bad (_("invalid use of operator \"%s\""), name); | |
| break; | |
| default: | |
| break; | |
| } | |
| if (op != O_absent && op != O_illegal) | |
| { | |
| restore_line_pointer (c); | |
| expr (9, expressionP, mode); | |
| expressionP->X_add_symbol = make_expr_symbol (expressionP); | |
| expressionP->X_op_symbol = NULL; | |
| expressionP->X_add_number = 0; | |
| expressionP->X_op = op; | |
| break; | |
| } | |
| } | |
| #endif | |
| #ifdef md_parse_name | |
| /* This is a hook for the backend to parse certain names | |
| specially in certain contexts. If a name always has a | |
| specific value, it can often be handled by simply | |
| entering it in the symbol table. */ | |
| if (md_parse_name (name, expressionP, mode, &c)) | |
| { | |
| restore_line_pointer (c); | |
| break; | |
| } | |
| #endif | |
| symbolP = symbol_find_or_make (name); | |
| /* If we have an absolute symbol or a reg, then we know its | |
| value now. */ | |
| segment = S_GET_SEGMENT (symbolP); | |
| if (mode != expr_defer | |
| && segment == absolute_section | |
| && !S_FORCE_RELOC (symbolP, 0)) | |
| { | |
| expressionP->X_op = O_constant; | |
| expressionP->X_add_number = S_GET_VALUE (symbolP); | |
| } | |
| else if (mode != expr_defer && segment == reg_section) | |
| { | |
| expressionP->X_op = O_register; | |
| expressionP->X_add_number = S_GET_VALUE (symbolP); | |
| } | |
| else | |
| { | |
| expressionP->X_op = O_symbol; | |
| expressionP->X_add_symbol = symbolP; | |
| expressionP->X_add_number = 0; | |
| } | |
| restore_line_pointer (c); | |
| } | |
| else | |
| { | |
| /* Let the target try to parse it. Success is indicated by changing | |
| the X_op field to something other than O_absent and pointing | |
| input_line_pointer past the expression. If it can't parse the | |
| expression, X_op and input_line_pointer should be unchanged. */ | |
| expressionP->X_op = O_absent; | |
| --input_line_pointer; | |
| md_operand (expressionP); | |
| if (expressionP->X_op == O_absent) | |
| { | |
| ++input_line_pointer; | |
| as_bad (_("bad expression")); | |
| expressionP->X_op = O_constant; | |
| expressionP->X_add_number = 0; | |
| } | |
| } | |
| break; | |
| } | |
| /* It is more 'efficient' to clean up the expressionS when they are | |
| created. Doing it here saves lines of code. */ | |
| clean_up_expression (expressionP); | |
| SKIP_ALL_WHITESPACE (); /* -> 1st char after operand. */ | |
| know (*input_line_pointer != ' '); | |
| /* The PA port needs this information. */ | |
| if (expressionP->X_add_symbol) | |
| symbol_mark_used (expressionP->X_add_symbol); | |
| if (mode != expr_defer) | |
| { | |
| expressionP->X_add_symbol | |
| = symbol_clone_if_forward_ref (expressionP->X_add_symbol); | |
| expressionP->X_op_symbol | |
| = symbol_clone_if_forward_ref (expressionP->X_op_symbol); | |
| } | |
| switch (expressionP->X_op) | |
| { | |
| default: | |
| return absolute_section; | |
| case O_symbol: | |
| return S_GET_SEGMENT (expressionP->X_add_symbol); | |
| case O_register: | |
| return reg_section; | |
| } | |
| } | |
| /* Internal. Simplify a struct expression for use by expr (). */ | |
| /* In: address of an expressionS. | |
| The X_op field of the expressionS may only take certain values. | |
| Elsewise we waste time special-case testing. Sigh. Ditto SEG_ABSENT. | |
| Out: expressionS may have been modified: | |
| Unused fields zeroed to help expr (). */ | |
| static void | |
| clean_up_expression (expressionS *expressionP) | |
| { | |
| switch (expressionP->X_op) | |
| { | |
| case O_illegal: | |
| case O_absent: | |
| expressionP->X_add_number = 0; | |
| /* Fall through. */ | |
| case O_big: | |
| case O_constant: | |
| case O_register: | |
| expressionP->X_add_symbol = NULL; | |
| /* Fall through. */ | |
| case O_symbol: | |
| case O_uminus: | |
| case O_bit_not: | |
| expressionP->X_op_symbol = NULL; | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /* Expression parser. */ | |
| /* We allow an empty expression, and just assume (absolute,0) silently. | |
| Unary operators and parenthetical expressions are treated as operands. | |
| As usual, Q==quantity==operand, O==operator, X==expression mnemonics. | |
| We used to do an aho/ullman shift-reduce parser, but the logic got so | |
| warped that I flushed it and wrote a recursive-descent parser instead. | |
| Now things are stable, would anybody like to write a fast parser? | |
| Most expressions are either register (which does not even reach here) | |
| or 1 symbol. Then "symbol+constant" and "symbol-symbol" are common. | |
| So I guess it doesn't really matter how inefficient more complex expressions | |
| are parsed. | |
| After expr(RANK,resultP) input_line_pointer->operator of rank <= RANK. | |
| Also, we have consumed any leading or trailing spaces (operand does that) | |
| and done all intervening operators. | |
| This returns the segment of the result, which will be | |
| absolute_section or the segment of a symbol. */ | |
| #undef __ | |
| #define __ O_illegal | |
| #ifndef O_SINGLE_EQ | |
| #define O_SINGLE_EQ O_illegal | |
| #endif | |
| /* Maps ASCII -> operators. */ | |
| static const operatorT op_encoding[256] = { | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, | |
| __, O_bit_or_not, __, __, __, O_modulus, O_bit_and, __, | |
| __, __, O_multiply, O_add, __, O_subtract, __, O_divide, | |
| __, __, __, __, __, __, __, __, | |
| __, __, __, __, O_lt, O_SINGLE_EQ, O_gt, __, | |
| __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, | |
| __, __, __, | |
| #ifdef NEED_INDEX_OPERATOR | |
| O_index, | |
| #else | |
| __, | |
| #endif | |
| __, __, O_bit_exclusive_or, __, | |
| __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, | |
| __, __, __, __, O_bit_inclusive_or, __, __, __, | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, | |
| __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __ | |
| }; | |
| /* Rank Examples | |
| 0 operand, (expression) | |
| 1 || | |
| 2 && | |
| 3 == <> < <= >= > | |
| 4 + - | |
| 5 used for * / % in MRI mode | |
| 6 & ^ ! | | |
| 7 * / % << >> | |
| 8 unary - unary ~ | |
| */ | |
| static operator_rankT op_rank[O_max] = { | |
| 0, /* O_illegal */ | |
| 0, /* O_absent */ | |
| 0, /* O_constant */ | |
| 0, /* O_symbol */ | |
| 0, /* O_symbol_rva */ | |
| 0, /* O_secidx */ | |
| 0, /* O_register */ | |
| 0, /* O_big */ | |
| 9, /* O_uminus */ | |
| 9, /* O_bit_not */ | |
| 9, /* O_logical_not */ | |
| 8, /* O_multiply */ | |
| 8, /* O_divide */ | |
| 8, /* O_modulus */ | |
| 8, /* O_left_shift */ | |
| 8, /* O_right_shift */ | |
| 7, /* O_bit_inclusive_or */ | |
| 7, /* O_bit_or_not */ | |
| 7, /* O_bit_exclusive_or */ | |
| 7, /* O_bit_and */ | |
| 5, /* O_add */ | |
| 5, /* O_subtract */ | |
| 4, /* O_eq */ | |
| 4, /* O_ne */ | |
| 4, /* O_lt */ | |
| 4, /* O_le */ | |
| 4, /* O_ge */ | |
| 4, /* O_gt */ | |
| 3, /* O_logical_and */ | |
| 2, /* O_logical_or */ | |
| 1, /* O_index */ | |
| }; | |
| /* Unfortunately, in MRI mode for the m68k, multiplication and | |
| division have lower precedence than the bit wise operators. This | |
| function sets the operator precedences correctly for the current | |
| mode. Also, MRI uses a different bit_not operator, and this fixes | |
| that as well. */ | |
| #define STANDARD_MUL_PRECEDENCE 8 | |
| #define MRI_MUL_PRECEDENCE 6 | |
| void | |
| expr_set_precedence (void) | |
| { | |
| if (flag_m68k_mri) | |
| { | |
| op_rank[O_multiply] = MRI_MUL_PRECEDENCE; | |
| op_rank[O_divide] = MRI_MUL_PRECEDENCE; | |
| op_rank[O_modulus] = MRI_MUL_PRECEDENCE; | |
| } | |
| else | |
| { | |
| op_rank[O_multiply] = STANDARD_MUL_PRECEDENCE; | |
| op_rank[O_divide] = STANDARD_MUL_PRECEDENCE; | |
| op_rank[O_modulus] = STANDARD_MUL_PRECEDENCE; | |
| } | |
| } | |
| void | |
| expr_set_rank (operatorT op, operator_rankT rank) | |
| { | |
| gas_assert (op >= O_md1 && op < ARRAY_SIZE (op_rank)); | |
| op_rank[op] = rank; | |
| } | |
| /* Initialize the expression parser. */ | |
| void | |
| expr_begin (void) | |
| { | |
| expr_set_precedence (); | |
| /* Verify that X_op field is wide enough. */ | |
| { | |
| expressionS e; | |
| e.X_op = O_max; | |
| gas_assert (e.X_op == O_max); | |
| } | |
| memset (seen, 0, sizeof seen); | |
| memset (nr_seen, 0, sizeof nr_seen); | |
| expr_symbol_lines = NULL; | |
| } | |
| void | |
| expr_end (void) | |
| { | |
| for (size_t i = 0; i < ARRAY_SIZE (seen); i++) | |
| free (seen[i]); | |
| } | |
| /* Return the encoding for the operator at INPUT_LINE_POINTER, and | |
| sets NUM_CHARS to the number of characters in the operator. | |
| Does not advance INPUT_LINE_POINTER. */ | |
| static inline operatorT | |
| operatorf (int *num_chars) | |
| { | |
| int c; | |
| operatorT ret; | |
| c = *input_line_pointer & 0xff; | |
| *num_chars = 1; | |
| if (is_end_of_line[c]) | |
| return O_illegal; | |
| #ifdef md_operator | |
| if (is_name_beginner (c)) | |
| { | |
| char *name; | |
| char ec = get_symbol_name (& name); | |
| ret = md_operator (name, 2, &ec); | |
| switch (ret) | |
| { | |
| case O_absent: | |
| *input_line_pointer = ec; | |
| input_line_pointer = name; | |
| break; | |
| case O_uminus: | |
| case O_bit_not: | |
| case O_logical_not: | |
| as_bad (_("invalid use of operator \"%s\""), name); | |
| ret = O_illegal; | |
| /* FALLTHROUGH */ | |
| default: | |
| *input_line_pointer = ec; | |
| *num_chars = input_line_pointer - name; | |
| input_line_pointer = name; | |
| return ret; | |
| } | |
| } | |
| #endif | |
| switch (c) | |
| { | |
| default: | |
| ret = op_encoding[c]; | |
| #ifdef md_operator | |
| if (ret == O_illegal) | |
| { | |
| char *start = input_line_pointer; | |
| ret = md_operator (NULL, 2, NULL); | |
| if (ret != O_illegal) | |
| *num_chars = input_line_pointer - start; | |
| input_line_pointer = start; | |
| } | |
| #endif | |
| return ret; | |
| case '+': | |
| case '-': | |
| return op_encoding[c]; | |
| case '<': | |
| switch (input_line_pointer[1]) | |
| { | |
| default: | |
| return op_encoding[c]; | |
| case '<': | |
| ret = O_left_shift; | |
| break; | |
| case '>': | |
| ret = O_ne; | |
| break; | |
| case '=': | |
| ret = O_le; | |
| break; | |
| } | |
| *num_chars = 2; | |
| return ret; | |
| case '=': | |
| if (input_line_pointer[1] != '=') | |
| return op_encoding[c]; | |
| *num_chars = 2; | |
| return O_eq; | |
| case '>': | |
| switch (input_line_pointer[1]) | |
| { | |
| default: | |
| return op_encoding[c]; | |
| case '>': | |
| ret = O_right_shift; | |
| break; | |
| case '=': | |
| ret = O_ge; | |
| break; | |
| } | |
| *num_chars = 2; | |
| return ret; | |
| case '!': | |
| switch (input_line_pointer[1]) | |
| { | |
| case '!': | |
| /* We accept !! as equivalent to ^ for MRI compatibility. */ | |
| *num_chars = 2; | |
| return O_bit_exclusive_or; | |
| case '=': | |
| /* We accept != as equivalent to <>. */ | |
| *num_chars = 2; | |
| return O_ne; | |
| default: | |
| if (flag_m68k_mri) | |
| return O_bit_inclusive_or; | |
| return op_encoding[c]; | |
| } | |
| case '|': | |
| if (input_line_pointer[1] != '|') | |
| return op_encoding[c]; | |
| *num_chars = 2; | |
| return O_logical_or; | |
| case '&': | |
| if (input_line_pointer[1] != '&') | |
| return op_encoding[c]; | |
| *num_chars = 2; | |
| return O_logical_and; | |
| } | |
| /* NOTREACHED */ | |
| } | |
| /* Implement "word-size + 1 bit" addition for | |
| {resultP->X_extrabit:resultP->X_add_number} + {rhs_highbit:amount}. This | |
| is used so that the full range of unsigned word values and the full range of | |
| signed word values can be represented in an O_constant expression, which is | |
| useful e.g. for .sleb128 directives. */ | |
| void | |
| add_to_result (expressionS *resultP, offsetT amount, int rhs_highbit) | |
| { | |
| valueT ures = resultP->X_add_number; | |
| valueT uamount = amount; | |
| resultP->X_add_number += uamount; | |
| resultP->X_extrabit ^= rhs_highbit; | |
| if (ures + uamount < ures) | |
| resultP->X_extrabit ^= 1; | |
| } | |
| /* Similarly, for subtraction. */ | |
| void | |
| subtract_from_result (expressionS *resultP, offsetT amount, int rhs_highbit) | |
| { | |
| valueT ures = resultP->X_add_number; | |
| valueT uamount = amount; | |
| resultP->X_add_number -= uamount; | |
| resultP->X_extrabit ^= rhs_highbit; | |
| if (ures < uamount) | |
| resultP->X_extrabit ^= 1; | |
| } | |
| /* Parse an expression. */ | |
| segT | |
| expr (int rankarg, /* Larger # is higher rank. */ | |
| expressionS *resultP, /* Deliver result here. */ | |
| enum expr_mode mode /* Controls behavior. */) | |
| { | |
| operator_rankT rank = (operator_rankT) rankarg; | |
| segT retval; | |
| expressionS right; | |
| operatorT op_left; | |
| operatorT op_right; | |
| int op_chars; | |
| know (rankarg >= 0); | |
| /* Save the value of dot for the fixup code. */ | |
| if (rank == 0) | |
| { | |
| dot_value = frag_now_fix (); | |
| dot_frag = frag_now; | |
| } | |
| retval = operand (resultP, mode); | |
| /* operand () gobbles spaces. */ | |
| know (*input_line_pointer != ' '); | |
| op_left = operatorf (&op_chars); | |
| while (op_left != O_illegal && op_rank[(int) op_left] > rank) | |
| { | |
| segT rightseg; | |
| bool is_unsigned; | |
| offsetT frag_off; | |
| input_line_pointer += op_chars; /* -> after operator. */ | |
| right.X_md = 0; | |
| rightseg = expr (op_rank[(int) op_left], &right, mode); | |
| if (right.X_op == O_absent) | |
| { | |
| as_warn (_("missing operand; zero assumed")); | |
| right.X_op = O_constant; | |
| right.X_add_number = 0; | |
| right.X_add_symbol = NULL; | |
| right.X_op_symbol = NULL; | |
| } | |
| know (*input_line_pointer != ' '); | |
| if (op_left == O_index) | |
| { | |
| if (*input_line_pointer != ']') | |
| as_bad ("missing right bracket"); | |
| else | |
| { | |
| ++input_line_pointer; | |
| SKIP_WHITESPACE (); | |
| } | |
| } | |
| op_right = operatorf (&op_chars); | |
| know (op_right == O_illegal || op_left == O_index | |
| || op_rank[(int) op_right] <= op_rank[(int) op_left]); | |
| know ((int) op_left >= (int) O_multiply); | |
| #ifndef md_operator | |
| know ((int) op_left <= (int) O_index); | |
| #else | |
| know ((int) op_left < (int) O_max); | |
| #endif | |
| /* input_line_pointer->after right-hand quantity. */ | |
| /* left-hand quantity in resultP. */ | |
| /* right-hand quantity in right. */ | |
| /* operator in op_left. */ | |
| if (resultP->X_op == O_big) | |
| { | |
| if (resultP->X_add_number > 0) | |
| as_warn (_("left operand is a bignum; integer 0 assumed")); | |
| else | |
| as_warn (_("left operand is a float; integer 0 assumed")); | |
| resultP->X_op = O_constant; | |
| resultP->X_add_number = 0; | |
| resultP->X_add_symbol = NULL; | |
| resultP->X_op_symbol = NULL; | |
| } | |
| if (right.X_op == O_big) | |
| { | |
| if (right.X_add_number > 0) | |
| as_warn (_("right operand is a bignum; integer 0 assumed")); | |
| else | |
| as_warn (_("right operand is a float; integer 0 assumed")); | |
| right.X_op = O_constant; | |
| right.X_add_number = 0; | |
| right.X_add_symbol = NULL; | |
| right.X_op_symbol = NULL; | |
| } | |
| is_unsigned = resultP->X_unsigned && right.X_unsigned; | |
| if (mode == expr_defer | |
| && ((resultP->X_add_symbol != NULL | |
| && S_IS_FORWARD_REF (resultP->X_add_symbol)) | |
| || (right.X_add_symbol != NULL | |
| && S_IS_FORWARD_REF (right.X_add_symbol)))) | |
| goto general; | |
| /* Optimize common cases. */ | |
| #ifdef md_optimize_expr | |
| if (md_optimize_expr (resultP, op_left, &right)) | |
| { | |
| /* Skip. */ | |
| is_unsigned = resultP->X_unsigned; | |
| } | |
| else | |
| #endif | |
| if (op_left == O_add && right.X_op == O_constant | |
| && (md_register_arithmetic || resultP->X_op != O_register)) | |
| { | |
| /* X + constant. */ | |
| add_to_result (resultP, right.X_add_number, right.X_extrabit); | |
| } | |
| /* This case comes up in PIC code. */ | |
| else if (op_left == O_subtract | |
| && right.X_op == O_symbol | |
| && resultP->X_op == O_symbol | |
| && retval == rightseg | |
| #ifdef md_allow_local_subtract | |
| && md_allow_local_subtract (resultP, & right, rightseg) | |
| #endif | |
| && ((SEG_NORMAL (rightseg) | |
| && !S_FORCE_RELOC (resultP->X_add_symbol, 0) | |
| && !S_FORCE_RELOC (right.X_add_symbol, 0)) | |
| || right.X_add_symbol == resultP->X_add_symbol) | |
| && frag_offset_fixed_p (symbol_get_frag (resultP->X_add_symbol), | |
| symbol_get_frag (right.X_add_symbol), | |
| &frag_off)) | |
| { | |
| offsetT symval_diff = S_GET_VALUE (resultP->X_add_symbol) | |
| - S_GET_VALUE (right.X_add_symbol); | |
| subtract_from_result (resultP, right.X_add_number, right.X_extrabit); | |
| subtract_from_result (resultP, frag_off / OCTETS_PER_BYTE, 0); | |
| add_to_result (resultP, symval_diff, symval_diff < 0); | |
| resultP->X_op = O_constant; | |
| resultP->X_add_symbol = 0; | |
| is_unsigned = false; | |
| } | |
| else if (op_left == O_subtract && right.X_op == O_constant | |
| && (md_register_arithmetic || resultP->X_op != O_register)) | |
| { | |
| /* X - constant. */ | |
| subtract_from_result (resultP, right.X_add_number, right.X_extrabit); | |
| is_unsigned = false; | |
| } | |
| else if (op_left == O_add && resultP->X_op == O_constant | |
| && (md_register_arithmetic || right.X_op != O_register)) | |
| { | |
| /* Constant + X. */ | |
| resultP->X_op = right.X_op; | |
| resultP->X_add_symbol = right.X_add_symbol; | |
| resultP->X_op_symbol = right.X_op_symbol; | |
| add_to_result (resultP, right.X_add_number, right.X_extrabit); | |
| retval = rightseg; | |
| } | |
| else if (resultP->X_op == O_constant && right.X_op == O_constant) | |
| { | |
| /* Constant OP constant. */ | |
| offsetT v = right.X_add_number; | |
| if (v == 0 && (op_left == O_divide || op_left == O_modulus)) | |
| { | |
| as_warn (_("division by zero")); | |
| v = 1; | |
| } | |
| switch (op_left) | |
| { | |
| default: goto general; | |
| case O_multiply: | |
| /* Do the multiply as unsigned to silence ubsan. The | |
| result is of course the same when we throw away high | |
| bits of the result. */ | |
| resultP->X_add_number *= (valueT) v; | |
| break; | |
| case O_divide: resultP->X_add_number /= v; break; | |
| case O_modulus: resultP->X_add_number %= v; break; | |
| case O_left_shift: | |
| case O_right_shift: | |
| /* We always use unsigned shifts. According to the ISO | |
| C standard, left shift of a signed type having a | |
| negative value is undefined behaviour, and right | |
| shift of a signed type having negative value is | |
| implementation defined. Left shift of a signed type | |
| when the result overflows is also undefined | |
| behaviour. So don't trigger ubsan warnings or rely | |
| on characteristics of the compiler. */ | |
| if ((valueT) v >= sizeof (valueT) * CHAR_BIT) | |
| { | |
| as_warn_value_out_of_range (_("shift count"), v, 0, | |
| sizeof (valueT) * CHAR_BIT - 1, | |
| NULL, 0); | |
| resultP->X_add_number = 0; | |
| } | |
| else if (op_left == O_left_shift) | |
| resultP->X_add_number | |
| = (valueT) resultP->X_add_number << (valueT) v; | |
| else | |
| resultP->X_add_number | |
| = (valueT) resultP->X_add_number >> (valueT) v; | |
| is_unsigned = resultP->X_unsigned; | |
| break; | |
| case O_bit_inclusive_or: resultP->X_add_number |= v; break; | |
| case O_bit_or_not: resultP->X_add_number |= ~v; break; | |
| case O_bit_exclusive_or: resultP->X_add_number ^= v; break; | |
| case O_bit_and: resultP->X_add_number &= v; break; | |
| /* Constant + constant (O_add) is handled by the | |
| previous if statement for constant + X, so is omitted | |
| here. */ | |
| case O_subtract: | |
| subtract_from_result (resultP, v, 0); | |
| is_unsigned = false; | |
| break; | |
| case O_eq: | |
| resultP->X_add_number = | |
| resultP->X_add_number == v ? ~ (offsetT) 0 : 0; | |
| is_unsigned = false; | |
| break; | |
| case O_ne: | |
| resultP->X_add_number = | |
| resultP->X_add_number != v ? ~ (offsetT) 0 : 0; | |
| is_unsigned = false; | |
| break; | |
| case O_lt: | |
| resultP->X_add_number = | |
| resultP->X_add_number < v ? ~ (offsetT) 0 : 0; | |
| is_unsigned = false; | |
| break; | |
| case O_le: | |
| resultP->X_add_number = | |
| resultP->X_add_number <= v ? ~ (offsetT) 0 : 0; | |
| is_unsigned = false; | |
| break; | |
| case O_ge: | |
| resultP->X_add_number = | |
| resultP->X_add_number >= v ? ~ (offsetT) 0 : 0; | |
| is_unsigned = false; | |
| break; | |
| case O_gt: | |
| resultP->X_add_number = | |
| resultP->X_add_number > v ? ~ (offsetT) 0 : 0; | |
| is_unsigned = false; | |
| break; | |
| case O_logical_and: | |
| resultP->X_add_number = resultP->X_add_number && v; | |
| is_unsigned = true; | |
| break; | |
| case O_logical_or: | |
| resultP->X_add_number = resultP->X_add_number || v; | |
| is_unsigned = true; | |
| break; | |
| } | |
| } | |
| else if (resultP->X_op == O_symbol | |
| && right.X_op == O_symbol | |
| && (op_left == O_add | |
| || op_left == O_subtract | |
| || (resultP->X_add_number == 0 | |
| && right.X_add_number == 0))) | |
| { | |
| /* Symbol OP symbol. */ | |
| resultP->X_op = op_left; | |
| resultP->X_op_symbol = right.X_add_symbol; | |
| if (op_left == O_add) | |
| add_to_result (resultP, right.X_add_number, right.X_extrabit); | |
| else if (op_left == O_subtract) | |
| { | |
| subtract_from_result (resultP, right.X_add_number, | |
| right.X_extrabit); | |
| if (retval == rightseg | |
| && SEG_NORMAL (retval) | |
| && !S_FORCE_RELOC (resultP->X_add_symbol, 0) | |
| && !S_FORCE_RELOC (right.X_add_symbol, 0)) | |
| { | |
| retval = absolute_section; | |
| rightseg = absolute_section; | |
| } | |
| } | |
| } | |
| else | |
| { | |
| general: | |
| /* The general case. */ | |
| resultP->X_add_symbol = make_expr_symbol (resultP); | |
| resultP->X_op_symbol = make_expr_symbol (&right); | |
| resultP->X_op = op_left; | |
| resultP->X_add_number = 0; | |
| resultP->X_extrabit = 0; | |
| } | |
| resultP->X_unsigned = is_unsigned; | |
| if (retval != rightseg) | |
| { | |
| if (retval == undefined_section) | |
| ; | |
| else if (rightseg == undefined_section) | |
| retval = rightseg; | |
| else if (retval == expr_section) | |
| ; | |
| else if (rightseg == expr_section) | |
| retval = rightseg; | |
| else if (retval == reg_section) | |
| ; | |
| else if (rightseg == reg_section) | |
| retval = rightseg; | |
| else if (rightseg == absolute_section) | |
| ; | |
| else if (retval == absolute_section) | |
| retval = rightseg; | |
| #ifdef DIFF_EXPR_OK | |
| else if (op_left == O_subtract) | |
| ; | |
| #endif | |
| else | |
| as_bad (_("operation combines symbols in different segments")); | |
| } | |
| op_left = op_right; | |
| } /* While next operator is >= this rank. */ | |
| /* The PA port needs this information. */ | |
| if (resultP->X_add_symbol) | |
| symbol_mark_used (resultP->X_add_symbol); | |
| if (rank == 0 && mode == expr_evaluate) | |
| resolve_expression (resultP); | |
| return resultP->X_op == O_constant ? absolute_section : retval; | |
| } | |
| /* Resolve an expression without changing any symbols/sub-expressions | |
| used. */ | |
| int | |
| resolve_expression (expressionS *expressionP) | |
| { | |
| /* Help out with CSE. */ | |
| valueT final_val = expressionP->X_add_number; | |
| symbolS *add_symbol = expressionP->X_add_symbol; | |
| symbolS *orig_add_symbol = add_symbol; | |
| symbolS *op_symbol = expressionP->X_op_symbol; | |
| operatorT op = expressionP->X_op; | |
| valueT left, right; | |
| segT seg_left, seg_right; | |
| fragS *frag_left, *frag_right; | |
| offsetT frag_off; | |
| switch (op) | |
| { | |
| default: | |
| return 0; | |
| case O_constant: | |
| case O_register: | |
| left = 0; | |
| break; | |
| case O_symbol: | |
| case O_symbol_rva: | |
| if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left)) | |
| return 0; | |
| break; | |
| case O_uminus: | |
| case O_bit_not: | |
| case O_logical_not: | |
| if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left)) | |
| return 0; | |
| if (seg_left != absolute_section) | |
| return 0; | |
| if (op == O_logical_not) | |
| left = !left; | |
| else if (op == O_uminus) | |
| left = -left; | |
| else | |
| left = ~left; | |
| op = O_constant; | |
| break; | |
| case O_multiply: | |
| case O_divide: | |
| case O_modulus: | |
| case O_left_shift: | |
| case O_right_shift: | |
| case O_bit_inclusive_or: | |
| case O_bit_or_not: | |
| case O_bit_exclusive_or: | |
| case O_bit_and: | |
| case O_add: | |
| case O_subtract: | |
| case O_eq: | |
| case O_ne: | |
| case O_lt: | |
| case O_le: | |
| case O_ge: | |
| case O_gt: | |
| case O_logical_and: | |
| case O_logical_or: | |
| if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left) | |
| || !snapshot_symbol (&op_symbol, &right, &seg_right, &frag_right)) | |
| return 0; | |
| /* Simplify addition or subtraction of a constant by folding the | |
| constant into X_add_number. */ | |
| if (op == O_add) | |
| { | |
| if (seg_right == absolute_section) | |
| { | |
| final_val += right; | |
| op = O_symbol; | |
| break; | |
| } | |
| else if (seg_left == absolute_section) | |
| { | |
| final_val += left; | |
| left = right; | |
| seg_left = seg_right; | |
| add_symbol = op_symbol; | |
| orig_add_symbol = expressionP->X_op_symbol; | |
| op = O_symbol; | |
| break; | |
| } | |
| } | |
| else if (op == O_subtract) | |
| { | |
| if (seg_right == absolute_section) | |
| { | |
| final_val -= right; | |
| op = O_symbol; | |
| break; | |
| } | |
| } | |
| /* Equality and non-equality tests are permitted on anything. | |
| Subtraction, and other comparison operators are permitted if | |
| both operands are in the same section. | |
| Shifts by constant zero are permitted on anything. | |
| Multiplies, bit-ors, and bit-ands with constant zero are | |
| permitted on anything. | |
| Multiplies and divides by constant one are permitted on | |
| anything. | |
| Binary operations with both operands being the same register | |
| or undefined symbol are permitted if the result doesn't depend | |
| on the input value. | |
| Otherwise, both operands must be absolute. We already handled | |
| the case of addition or subtraction of a constant above. */ | |
| frag_off = 0; | |
| if (!(seg_left == absolute_section | |
| && seg_right == absolute_section) | |
| && !(op == O_eq || op == O_ne) | |
| && !((op == O_subtract | |
| || op == O_lt || op == O_le || op == O_ge || op == O_gt) | |
| && seg_left == seg_right | |
| && (finalize_syms | |
| || frag_offset_fixed_p (frag_left, frag_right, &frag_off) | |
| || (op == O_gt | |
| && frag_gtoffset_p (left, frag_left, | |
| right, frag_right, &frag_off))) | |
| && (seg_left != reg_section || left == right) | |
| && (seg_left != undefined_section || add_symbol == op_symbol))) | |
| { | |
| if ((seg_left == absolute_section && left == 0) | |
| || (seg_right == absolute_section && right == 0)) | |
| { | |
| if (op == O_bit_exclusive_or || op == O_bit_inclusive_or) | |
| { | |
| if (!(seg_right == absolute_section && right == 0)) | |
| { | |
| seg_left = seg_right; | |
| left = right; | |
| add_symbol = op_symbol; | |
| orig_add_symbol = expressionP->X_op_symbol; | |
| } | |
| op = O_symbol; | |
| break; | |
| } | |
| else if (op == O_left_shift || op == O_right_shift) | |
| { | |
| if (!(seg_left == absolute_section && left == 0)) | |
| { | |
| op = O_symbol; | |
| break; | |
| } | |
| } | |
| else if (op != O_multiply | |
| && op != O_bit_or_not && op != O_bit_and) | |
| return 0; | |
| } | |
| else if (op == O_multiply | |
| && seg_left == absolute_section && left == 1) | |
| { | |
| seg_left = seg_right; | |
| left = right; | |
| add_symbol = op_symbol; | |
| orig_add_symbol = expressionP->X_op_symbol; | |
| op = O_symbol; | |
| break; | |
| } | |
| else if ((op == O_multiply || op == O_divide) | |
| && seg_right == absolute_section && right == 1) | |
| { | |
| op = O_symbol; | |
| break; | |
| } | |
| else if (!(left == right | |
| && ((seg_left == reg_section && seg_right == reg_section) | |
| || (seg_left == undefined_section | |
| && seg_right == undefined_section | |
| && add_symbol == op_symbol)))) | |
| return 0; | |
| else if (op == O_bit_and || op == O_bit_inclusive_or) | |
| { | |
| op = O_symbol; | |
| break; | |
| } | |
| else if (op != O_bit_exclusive_or && op != O_bit_or_not) | |
| return 0; | |
| } | |
| right += frag_off / OCTETS_PER_BYTE; | |
| switch (op) | |
| { | |
| case O_add: left += right; break; | |
| case O_subtract: left -= right; break; | |
| case O_multiply: left *= right; break; | |
| case O_divide: | |
| if (right == 0) | |
| return 0; | |
| left = (offsetT) left / (offsetT) right; | |
| break; | |
| case O_modulus: | |
| if (right == 0) | |
| return 0; | |
| left = (offsetT) left % (offsetT) right; | |
| break; | |
| case O_left_shift: | |
| if (right >= sizeof (left) * CHAR_BIT) | |
| left = 0; | |
| else | |
| left <<= right; | |
| break; | |
| case O_right_shift: | |
| if (right >= sizeof (left) * CHAR_BIT) | |
| left = 0; | |
| else | |
| left >>= right; | |
| break; | |
| case O_bit_inclusive_or: left |= right; break; | |
| case O_bit_or_not: left |= ~right; break; | |
| case O_bit_exclusive_or: left ^= right; break; | |
| case O_bit_and: left &= right; break; | |
| case O_eq: | |
| case O_ne: | |
| left = (left == right | |
| && seg_left == seg_right | |
| && (finalize_syms || frag_left == frag_right) | |
| && (seg_left != undefined_section | |
| || add_symbol == op_symbol) | |
| ? ~ (valueT) 0 : 0); | |
| if (op == O_ne) | |
| left = ~left; | |
| break; | |
| case O_lt: | |
| left = (offsetT) left < (offsetT) right ? ~ (valueT) 0 : 0; | |
| break; | |
| case O_le: | |
| left = (offsetT) left <= (offsetT) right ? ~ (valueT) 0 : 0; | |
| break; | |
| case O_ge: | |
| left = (offsetT) left >= (offsetT) right ? ~ (valueT) 0 : 0; | |
| break; | |
| case O_gt: | |
| left = (offsetT) left > (offsetT) right ? ~ (valueT) 0 : 0; | |
| break; | |
| case O_logical_and: left = left && right; break; | |
| case O_logical_or: left = left || right; break; | |
| default: abort (); | |
| } | |
| op = O_constant; | |
| break; | |
| } | |
| if (op == O_symbol) | |
| { | |
| if (seg_left == absolute_section) | |
| op = O_constant; | |
| else if (seg_left == reg_section && final_val == 0) | |
| op = O_register; | |
| else if (!symbol_same_p (add_symbol, orig_add_symbol)) | |
| final_val += left; | |
| expressionP->X_add_symbol = add_symbol; | |
| } | |
| expressionP->X_op = op; | |
| if (op == O_constant || op == O_register) | |
| final_val += left; | |
| expressionP->X_add_number = final_val; | |
| return 1; | |
| } | |
| /* "Look through" register equates. */ | |
| void resolve_register (expressionS *expP) | |
| { | |
| symbolS *sym; | |
| offsetT acc = 0; | |
| const expressionS *e = expP; | |
| if (expP->X_op != O_symbol) | |
| return; | |
| do | |
| { | |
| sym = e->X_add_symbol; | |
| acc += e->X_add_number; | |
| e = symbol_get_value_expression (sym); | |
| } | |
| while (symbol_equated_p (sym)); | |
| if (e->X_op == O_register) | |
| { | |
| *expP = *e; | |
| expP->X_add_number += acc; | |
| } | |
| } | |
| /* This lives here because it belongs equally in expr.c & read.c. | |
| expr.c is just a branch office read.c anyway, and putting it | |
| here lessens the crowd at read.c. | |
| Assume input_line_pointer is at start of symbol name, or the | |
| start of a double quote enclosed symbol name. Advance | |
| input_line_pointer past symbol name. Turn that character into a '\0', | |
| returning its former value, which may be the closing double quote. | |
| This allows a string compare (RMS wants symbol names to be strings) | |
| of the symbol name. | |
| NOTE: The input buffer is further altered when adjacent strings are | |
| concatenated by the function. Callers caring about the original buffer | |
| contents will need to make a copy before calling here. | |
| There will always be a char following symbol name, because all good | |
| lines end in end-of-line. */ | |
| char | |
| get_symbol_name (char ** ilp_return) | |
| { | |
| char c; | |
| * ilp_return = input_line_pointer; | |
| /* We accept FAKE_LABEL_CHAR in a name in case this is being called with a | |
| constructed string. */ | |
| if (is_name_beginner (c = *input_line_pointer++) | |
| || (input_from_string && c == FAKE_LABEL_CHAR)) | |
| { | |
| while (is_part_of_name (c = *input_line_pointer++) | |
| || (input_from_string && c == FAKE_LABEL_CHAR)) | |
| ; | |
| if (is_name_ender (c)) | |
| c = *input_line_pointer++; | |
| } | |
| else if (c == '"') | |
| { | |
| char *dst = input_line_pointer; | |
| * ilp_return = input_line_pointer; | |
| for (;;) | |
| { | |
| c = *input_line_pointer++; | |
| if (c == 0) | |
| { | |
| as_warn (_("missing closing '\"'")); | |
| break; | |
| } | |
| if (c == '"') | |
| { | |
| char *ilp_save = input_line_pointer; | |
| SKIP_WHITESPACE (); | |
| if (*input_line_pointer == '"') | |
| { | |
| ++input_line_pointer; | |
| continue; | |
| } | |
| input_line_pointer = ilp_save; | |
| break; | |
| } | |
| if (c == '\\') | |
| switch (*input_line_pointer) | |
| { | |
| case '"': | |
| case '\\': | |
| c = *input_line_pointer++; | |
| break; | |
| default: | |
| if (c != 0) | |
| as_warn (_("'\\%c' in quoted symbol name; " | |
| "behavior may change in the future"), | |
| *input_line_pointer); | |
| break; | |
| } | |
| *dst++ = c; | |
| } | |
| *dst = 0; | |
| } | |
| *--input_line_pointer = 0; | |
| return c; | |
| } | |
| /* Replace the NUL character pointed to by input_line_pointer | |
| with C. If C is \" then advance past it. Return the character | |
| now pointed to by input_line_pointer. */ | |
| char | |
| restore_line_pointer (char c) | |
| { | |
| * input_line_pointer = c; | |
| if (c == '"') | |
| c = * ++ input_line_pointer; | |
| return c; | |
| } | |
| unsigned int | |
| get_single_number (void) | |
| { | |
| expressionS exp; | |
| operand (&exp, expr_normal); | |
| return exp.X_add_number; | |
| } |