| 2012-04-30 DJ Delorie <dj@redhat.com> | |
| * rx-decode.opc (MOV): Do not sign-extend immediates which are | |
| already the maximum bit size. | |
| * rx-decode.c: Regenerate. | |
| 2012-04-27 David S. Miller <davem@davemloft.net> | |
| * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'. | |
| * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr. | |
| * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'. | |
| * sparc-dis.c (v9a_asr_reg_names): Add 'pause'. | |
| * sparc-opc.c (CBCOND): New define. | |
| (CBCOND_XCC): Likewise. | |
| (cbcond): New helper macro. | |
| (sparc_opcodes): Add compare-and-branch instructions. | |
| * sparc-dis.c (print_insn_sparc): Handle ')'. | |
| * sparc-opc.c (sparc_opcodes): Add crypto instructions. | |
| * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values | |
| into new struct sparc_opcode 'hwcaps' field instead of 'flags'. | |
| 2012-04-12 David S. Miller <davem@davemloft.net> | |
| * sparc-dis.c (X_DISP10): Define. | |
| (print_insn_sparc): Handle '='. | |
| 2012-04-01 Mike Frysinger <vapier@gentoo.org> | |
| * bfin-dis.c (fmtconst): Replace decimal handling with a single | |
| sprintf call and the '*' field width. | |
| 2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com> | |
| * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP. | |
| 2012-03-16 Alan Modra <amodra@gmail.com> | |
| * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete. | |
| (powerpc_opcd_indices): Bump array size. | |
| (disassemble_init_powerpc): Set powerpc_opcd_indices entries | |
| corresponding to unused opcodes to following entry. | |
| (lookup_powerpc): New function, extracted and optimised from.. | |
| (print_insn_powerpc): ..here. | |
| 2012-03-15 Alan Modra <amodra@gmail.com> | |
| James Lemke <jwlemke@codesourcery.com> | |
| * disassemble.c (disassemble_init_for_target): Handle ppc init. | |
| * ppc-dis.c (private): New var. | |
| (powerpc_init_dialect): Don't return calloc failure, instead use | |
| private. | |
| (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define. | |
| (powerpc_opcd_indices): New array. | |
| (disassemble_init_powerpc): New function. | |
| (print_insn_big_powerpc): Don't init dialect here. | |
| (print_insn_little_powerpc): Likewise. | |
| (print_insn_powerpc): Start search using powerpc_opcd_indices. | |
| 2012-03-10 Edmar Wienskoski <edmar@freescale.com> | |
| * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500". | |
| * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New. | |
| (PPCVEC2, PPCTMR, E6500): New short names. | |
| (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt, | |
| mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx, | |
| lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl, | |
| lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl, | |
| lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC | |
| optional operands on sync instruction for E6500 target. | |
| 2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> | |
| * s390-opc.txt: Set instruction type of pku to SS_L2RDRD. | |
| 2012-02-27 Alan Modra <amodra@gmail.com> | |
| * mt-dis.c: Regenerate. | |
| 2012-02-27 Alan Modra <amodra@gmail.com> | |
| * v850-opc.c (extract_v8): Rearrange to make it obvious this | |
| is the inverse of corresponding insert function. | |
| (extract_d22, extract_u9, extract_r4): Likewise. | |
| (extract_d9): Correct sign extension. | |
| (extract_d16_15): Don't assume "long" is 32 bits, and don't | |
| rely on implementation defined behaviour for shift right of | |
| signed types. | |
| (extract_d16_16, extract_d17_16, extract_i9): Likewise. | |
| (extract_d23): Likewise, and correct mask. | |
| 2012-02-27 Alan Modra <amodra@gmail.com> | |
| * crx-dis.c (print_arg): Mask constant to 32 bits. | |
| * crx-opc.c (cst4_map): Use int array. | |
| 2012-02-27 Alan Modra <amodra@gmail.com> | |
| * arc-dis.c (BITS): Don't use shifts to mask off bits. | |
| (FIELDD): Sign extend with xor,sub. | |
| 2012-02-25 Walter Lee <walt@tilera.com> | |
| * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS. | |
| * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and | |
| TILEPRO_OPC_LW_TLS_SN. | |
| 2012-02-21 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-opc.h (HLEPrefixNone): New. | |
| (HLEPrefixLock): Likewise. | |
| (HLEPrefixAny): Likewise. | |
| (HLEPrefixRelease): Likewise. | |
| 2012-02-08 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-dis.c (HLE_Fixup1): New. | |
| (HLE_Fixup2): Likewise. | |
| (HLE_Fixup3): Likewise. | |
| (Ebh1): Likewise. | |
| (Evh1): Likewise. | |
| (Ebh2): Likewise. | |
| (Evh2): Likewise. | |
| (Ebh3): Likewise. | |
| (Evh3): Likewise. | |
| (MOD_C6_REG_7): Likewise. | |
| (MOD_C7_REG_7): Likewise. | |
| (RM_C6_REG_7): Likewise. | |
| (RM_C7_REG_7): Likewise. | |
| (XACQUIRE_PREFIX): Likewise. | |
| (XRELEASE_PREFIX): Likewise. | |
| (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts, | |
| cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use | |
| Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov. | |
| (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg, | |
| not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use | |
| MOD_C6_REG_7 and MOD_C7_REG_7. | |
| (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7. | |
| (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and | |
| xtest. | |
| (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX. | |
| (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b. | |
| * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and | |
| CPU_RTM_FLAGS. | |
| (cpu_flags): Add CpuHLE and CpuRTM. | |
| (opcode_modifiers): Add HLEPrefixOk. | |
| * i386-opc.h (CpuHLE): New. | |
| (CpuRTM): Likewise. | |
| (HLEPrefixOk): Likewise. | |
| (i386_cpu_flags): Add cpuhle and cpurtm. | |
| (i386_opcode_modifier): Add hleprefixok. | |
| * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to | |
| add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or, | |
| sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory | |
| operand. Add xacquire, xrelease, xabort, xbegin, xend and | |
| xtest. | |
| * i386-init.h: Regenerated. | |
| * i386-tbl.h: Likewise. | |
| 2012-01-24 DJ Delorie <dj@redhat.com> | |
| * rl78-decode.opc (rl78_decode_opcode): Add NOT1. | |
| * rl78-decode.c: Regenerate. | |
| 2012-01-17 James Murray <jsm@jsm-net.demon.co.uk> | |
| PR binutils/10173 | |
| * cr16-dis.c (print_arg): Test symtab_size not num_symbols. | |
| 2012-01-17 Andreas Schwab <schwab@linux-m68k.org> | |
| * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx | |
| register and move them after pmove with PSR/PCSR register. | |
| 2012-01-13 H.J. Lu <hongjiu.lu@intel.com> | |
| * i386-dis.c (mod_table): Add vmfunc. | |
| * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS. | |
| (cpu_flags): CpuVMFUNC. | |
| * i386-opc.h (CpuVMFUNC): New. | |
| (i386_cpu_flags): Add cpuvmfunc. | |
| * i386-opc.tbl: Add vmfunc. | |
| * i386-init.h: Regenerated. | |
| * i386-tbl.h: Likewise. | |
| For older changes see ChangeLog-2011 | |
| Local Variables: | |
| mode: change-log | |
| left-margin: 8 | |
| fill-column: 74 | |
| version-control: never | |
| End: |