| 2018-12-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/23900 |
| * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. |
| (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. |
| (decode_x86_feature_1): Likewise. |
| (decode_x86_feature_2): Likewise. |
| (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID |
| check. |
| * testsuite/binutils-all/i386/empty.d: Updated. |
| * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/empty.d: Likewise. |
| * testsuite/binutils-all/i386/pr21231b.s: Change |
| GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. |
| * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. |
| |
| 2018-12-13 Sam Tebbs <sam.tebbs@arm.com> |
| |
| * dwarf.c (read_cie): Add check for 'B'. |
| |
| 2018-12-11 Nick Clifton <nickc@redhat.com> |
| |
| * NEWS: Note that recursion limit has increased to 2048. |
| * doc/binutils.texi: Likewise. |
| |
| 2018-12-08 Alan Modra <amodra@gmail.com> |
| |
| * strings.c (unget_part_char): New function. |
| (print_strings): Use unget_part_char. Formatting. |
| * testsuite/binutils-all/strings.exp (test_multibyte): Don't |
| use square brackets in fail message. Expect "String1\nString2". |
| |
| 2018-12-07 Alan Modra <amodra@gmail.com> |
| |
| * nm.c (display_rel_file): Use xrealloc to increase minisyms |
| for synthetic symbols. |
| |
| 2018-12-07 Nick Clifton <nickc@redhat.com> |
| |
| * addr2line.c (demangle_flags): New static variable. |
| (long_options): Add --recurse-limit and --no-recurse-limit. |
| (translate_address): Pass demangle_flags to bfd_demangle. |
| (main): Handle --recurse-limit and --no-recurse-limit options. |
| * cxxfilt.c: (long_options): Add --recurse-limit and |
| --no-recurse-limit. |
| (main): Handle new options. |
| * nm.c (demangle_flags): New static variable. |
| (long_options): Add --recurse-limit and --no-recurse-limit. |
| (main): Handle new options. |
| * objdump.c (demangle_flags): New static variable. |
| (usage): Add --recurse-limit and --no-recurse-limit. |
| (long_options): Likewise. |
| (objdump_print_symname): Pass demangle_flags to bfd_demangle. |
| (disassemble_section): Likewise. |
| (dump_dymbols): Likewise. |
| (main): Handle new options. |
| * prdbg.c (demangle_flags): New static variable. |
| (tg_variable): Pass demangle_flags to demangler. |
| (tg_start_function): Likewise. |
| * stabs.c (demangle_flags): New static variable. |
| (stab_demangle_template): Pass demangle_flags to demangler. |
| (stab_demangle_v3_argtypes): Likewise. |
| (stab_demangle_v3_arg): Likewise. |
| * doc/binutuls.texi: Document new command line options. |
| * NEWS: Mention the new feature. |
| * testsuite/config/default.exp (CXXFILT): Define if not already |
| defined. |
| (CXXFILTFLAGS): Likewise. |
| * testsuite/binutils-all/cxxfilt.exp: New file. Runs a few |
| simple tests of the cxxfilt program. |
| |
| 2018-12-03 Nick Clifton <nickc@redhat.com> |
| |
| PR 23941 |
| * testsuite/binutils-all/i386/compressed-1a.d: Update expected output. |
| * testsuite/binutils-all/x86-64/compressed-1a.d: Likewise. |
| |
| 2018-12-01 Alan Modra <amodra@gmail.com> |
| |
| PR 23946 |
| * readelf.c (slurp_ia64_unwind_table): Bounds check symbol index |
| on reloc. |
| (slurp_hppa_unwind_table): Likewise. |
| |
| 2018-12-01 Alan Modra <amodra@gmail.com> |
| |
| PR 23945 |
| * readelf.c (slurp_ia64_unwind_table): Don't call elf_ia64_reloc_type |
| needlessly. |
| (slurp_hppa_unwind_table): Use same range checks and error messages |
| as slurp_ia64_unwind_table. |
| |
| 2018-11-29 Nick Clifton <nickc@redhat.com> |
| |
| PR 23931 |
| * objdump.c (dump_relocs_in_section): When checking for an |
| unreasonable amount of relocs in a bfd, allow for the fact that |
| the internal representation of a reloc may be bigger than the |
| external representation. |
| |
| 2018-11-27 Mark Wielaard <mark@klomp.org> |
| |
| PR binutils/23919 |
| * readelf.c (dump_sections_as_strings): Remove bogus addralign check. |
| (dump_sections_as_bytes): Likewise. |
| (load_specific_debug_sections): Likewise. |
| * testsuite/binutils-all/dw2-3.rS: Adjust alignment. |
| * testsuite/binutils-all/dw2-3.rt: Likewise. |
| |
| 2018-11-20 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/23898 |
| * testsuite/lib/binutils-common.exp (prune_warnings_extra): |
| Prune gaps in build notes. |
| |
| 2018-11-13 Francois H. Theron <francois.theron@netronome.com> |
| |
| * testsuite/binutils-all/nfp/test1.d: Test for swapped operand crc[]. |
| |
| |
| 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> |
| |
| * configure: Regenerate. |
| |
| 2018-11-09 Mathias <m4tze@exitno.de> |
| |
| * strings.c (print_strings): Check for multibyte encodings. |
| * binutils-all/strings-1.bin: New file. Test binary for string decoding. |
| * testsuite/binutils-all/strings.exp: New file. Test the strings program. |
| * testsuite/config/default.exp (STRINGS): Define if not provided |
| by the environment. |
| (STRINGSFLAGS): Likewise. |
| |
| 2018-11-07 Masatake Yamato <yamato@redhat.com> |
| |
| * objdump.c (long_options): Have the --disassemble option take an |
| optional argument. |
| (usage): Add description for the `symbol' argument to the |
| --disassemble option. |
| (disasm_sym): New file private variable. |
| (struct objdump_disasm_info): New field `symbol'. |
| (disassemble_section): Introduce `do_print' local variable |
| to control whether objdump displays the result of disassembling |
| for a symbol or not. |
| (main): Set `symbol' file private variable if the option argument |
| for the --disassemble option is given. |
| * doc/binutils.texi (objdump): Add description for the option |
| argument. |
| * NEWS: Mention the new feature. |
| * testsuite/binutils-all/objdump.exp: Add tests of the -d and |
| --disassemble=<symbol> options. |
| * testsuite/binutils-all/bintest.s: Add more symbols and code. |
| * testsuite/binutils-all/readelf.s: Update expected output. |
| * testsuite/binutils-all/readelf.ss-64: Likewise. |
| * testsuite/binutils-all/readelf.ss-mips: Likewise. |
| * testsuite/binutils-all/readelf.ss-tmips: Likewise. |
| |
| 2018-11-07 Nick Clifton <nickc@redhat.com> |
| |
| * po/pt.po: Updated Portuguese translation. |
| |
| 2018-11-06 Roman Bolshakov <r.bolshakov@yadro.com> |
| Saagar Jha <saagar@saagarjha.com> |
| |
| PR 23728 |
| * od-macho.c (printf_version): New. |
| (dump_load_command): Use it to print version. Print sdk version. Print |
| version info for watchOS and tvOS. Print LC_NOTE, LC_BUILD_VERSION. |
| (dump_buld_version): New. |
| (bfd_mach_o_platform_name): New |
| (bfd_mach_o_tool_name): New |
| |
| 2018-11-07 Yoshinori Sato <ysato@users.sourceforge.jp> |
| |
| * testsuite/lib/binutils-common.exp: Special section name |
| use only rx-*-elf. |
| |
| 2018-11-06 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * doc/binutils.texi: Document --enable-x86-feature and |
| --disable-x86-feature options for elfedit. |
| * elfedit.c: Include "config.h" and <sys/mman.h>. |
| (enable_x86_features): New. |
| (disable_x86_features): Likewise. |
| (update_gnu_property): Likewise. |
| (elf_x86_feature): Likewise. |
| (process_file): Call update_gnu_property on ET_EXEC or ET_DYN |
| file. |
| (command_line_switch): Add OPTION_ENABLE_X86_FEATURE and |
| OPTION_DISABLE_X86_FEATURE. |
| (options): Add--enable-x86-feature and --disable-x86-feature. |
| (usage): Likewise. |
| (main): Handle OPTION_ENABLE_X86_FEATURE and |
| OPTION_DISABLE_X86_FEATURE. |
| |
| 2018-11-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * elfedit.c (update_elf_header): Move EI_MAG? check to ... |
| (get_file_header): Here. |
| |
| 2018-11-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure.ac (AC_FUNC_MMAP): New. |
| * config.in: Regenerated. |
| * configure: Likewise. |
| |
| 2018-11-02 Alan Modra <amodra@gmail.com> |
| |
| * readelf.c (process_section_headers): Don't warn on a zero |
| sh_info or sh_link for any reloc section in an executable or |
| shared library. Do warn for .rel.dyn/.rela.dyn in ET_REL. |
| |
| 2018-11-01 Thomas Preud'homme <thomas.preudhomme@linaro.org> |
| |
| * testsuite/config/default.exp: Define LD, LDFLAGS and |
| ld_elf_shared_opt. |
| * testsuite/lib/binutils-common.exp (check_shared_lib_support): Moved |
| from ld-lib.exp. |
| (run_dump_test): Set ld to $LD. |
| |
| 2018-10-18 Nick Clifton <nickc@redhat.com> |
| |
| * doc/binutils.texi (readelf): Document alternatives to the |
| --unwind option if it is not supported for the target |
| architecture. |
| |
| 2018-10-16 Alan Modra <amodra@gmail.com> |
| |
| PR 23780 |
| * readelf.c (display_raw_attribute): Correct assertion. |
| |
| 2018-10-15 Alan Modra <amodra@gmail.com> |
| |
| PR 23534 |
| * addr2line.c (main): Exit with fatal error if bfd_init |
| returns an unexpected value. |
| * ar.c (main): Likewise. |
| * dlltool.c (identify_dll_for_implib): Likewise. |
| * nm.c (main): Likewise. |
| * objcopy.c (main): Likewise. |
| * objdump.c (main): Likewise. |
| * size.c (main): Likewise. |
| * strings.c (main): Likewise. |
| * windmc.c (main): Likewise. |
| * windres.c (main): Likewise. |
| |
| 2018-10-11 Jordan Rupprecht <rupprecht@google.com> |
| Nick Clifton <nickc@redhat.com> |
| |
| * objcopy.c (copy_main): Issue a fata error if the |
| --keep-global-symbol(s) and the --globalize-symbol(s) options are |
| used together. |
| * doc/binutils.texi: Document that the two options are |
| incompatible. |
| * testsuite/binutils-all/copy-5.d: New test. |
| * testsuite/binutils-all/objcopy.exp: Run the new test. |
| |
| 2018-10-10 Helge Deller <deller@gmx.de> |
| Alan Modra <amodra@gmail.com> |
| |
| * readelf.c (hppa_process_unwind): Don't use eh_addr_size to |
| calculate number of entries. |
| (slurp_hppa_unwind_table): Don't use eh_addr_size here either. |
| |
| 2018-10-10 Alan Modra <amodra@gmail.com> |
| |
| * objdump.c (dump_dwarf): Set s12z eh_addr_size to 4. |
| |
| 2018-10-08 Andreas Schwab <schwab@suse.de> |
| |
| * readelf.c (is_32bit_pcrel_reloc): Handle R_RISCV_32_PCREL. |
| |
| 2018-10-03 Nick Clifton <nickc@redhat.com> |
| |
| * po/pt.po: Updated Portuguese translation. |
| * po/fr.po: Updated French translation. |
| |
| 2018-09-22 Alan Modra <amodra@gmail.com> |
| |
| * readelf.c (apply_relocations): Don't return FALSE for warnings. |
| |
| 2018-09-20 Nelson Chu <nelson.chu1990@gmail.com> |
| |
| * testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number |
| from 215 to 255 for NDS32. |
| |
| 2018-09-17 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * objcopy.c (strip_specific_buffer): New. |
| (strip_unneeded_buffer): Likewise. |
| (keep_specific_buffer): Likewise. |
| (localize_specific_buffer): Likewise. |
| (globalize_specific_buffer): Likewise. |
| (keepglobal_specific_buffer): Likewise. |
| (weaken_specific_buffer): Likewise. |
| (add_specific_symbols): Add an argument to return pointer to |
| allocated buffer. |
| (copy_main): Update add_specific_symbols to update pointers to |
| allocated buffer. Free pointers to allocated buffer before |
| return. |
| |
| 2018-09-17 Alan Modra <amodra@gmail.com> |
| |
| * objcopy.c (handle_remove_section_option): Don't require a dot |
| after .rela and .rel to handle a possible relocation section. |
| * testsuite/binutils-all/remove-relocs-07.s, |
| * testsuite/binutils-all/remove-relocs-07.d, |
| * testsuite/binutils-all/remove-relocs-08.d: New tests. |
| * testsuite/binutils-all/remove-relocs-01.d, |
| * testsuite/binutils-all/remove-relocs-04.d, |
| * testsuite/binutils-all/remove-relocs-05.d, |
| * testsuite/binutils-all/remove-relocs-06.d: Exclude mips64-openbsd. |
| |
| 2018-09-17 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/lib/binutils-common.exp (is_som_format): New proc. |
| (run_dump_test): Correct target test for alternate .comm syntax. |
| (get_standard_section_names): Handle som format. |
| * testsuite/lib/utils-lib.exp (default_binutils_assemble_flags): |
| Correct target test for alternate .comm syntax. |
| |
| 2018-09-17 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/strip-13mips64.s: Add section flags |
| for reloc section. |
| * testsuite/binutils-all/strip-13rel.s: Likewise. |
| * testsuite/binutils-all/strip-13rela.s: Likewise. |
| * testsuite/binutils-all/strip-14mips64.s: Likewise. |
| * testsuite/binutils-all/strip-14rel.s: Likewise. |
| * testsuite/binutils-all/strip-14rela.s: Likewise. |
| * testsuite/binutils-all/strip-15mips64.s: Likewise. |
| * testsuite/binutils-all/strip-15rel.s: Likewise. |
| * testsuite/binutils-all/strip-15rela.s: Likewise. |
| |
| 2018-09-17 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/binutils-all/compress.exp: Rename second "objcopy |
| zlib-gnu compress debug sections 3" test to "objcopy zlib-gabi |
| compress debug sections 3" and use gabi object files instead |
| of gnu object files. |
| * testsuite/binutils-all/objcopy.exp: Add suffix to the names |
| of the "ELF group" tests. |
| * testsuite/binutils-all/readelf.exp (proc readelf_find_size): |
| Add an iteration parameter and include it in the name of the |
| test. Update callers to include an iteration count. |
| |
| 2018-09-15 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/add-symbol.d: Add "section_subst: no". |
| * testsuite/binutils-all/elfedit.exp: Don't set tempfile or copyfile. |
| * testsuite/binutils-all/symbols-1.d, |
| * testsuite/binutils-all/symbols-2.d, |
| * testsuite/binutils-all/symbols-3.d, |
| * testsuite/binutils-all/symbols-4.d: Quote '*' and '!'. |
| * testsuite/binutils-all/add-empty-section.d, |
| * testsuite/binutils-all/add-section.d, |
| * testsuite/binutils-all/elfedit.exp, |
| * testsuite/binutils-all/note-1.d, |
| * testsuite/binutils-all/pr23633.d: Add $subdir after $srcdir. |
| * testsuite/config/default.exp (AS, ASFLAGS): Define. |
| * testsuite/config/hppa.sed: Handle all common symbols. |
| * testsuite/lib/binutils-common.exp (run_dump_test): New proc, |
| merged from three other versions. |
| (slurp_options, file_contents, set_file_contents): Likewise. |
| (big_or_little_endian, get_standard_section_names): Likewise. |
| * testsuite/lib/utils-lib.exp (run_dump_test): Delete. |
| (slurp_options, proc file_contents): Delete. |
| (get_standard_section_names): Delete. |
| |
| 2018-09-15 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/copy-2.d, |
| * testsuite/binutils-all/copy-3.d, |
| * testsuite/binutils-all/copy-4.d, |
| * testsuite/binutils-all/elfedit-1.d, |
| * testsuite/binutils-all/note-1.d, |
| * testsuite/binutils-all/note-2-64.d, |
| * testsuite/binutils-all/strip-11.d, |
| * testsuite/binutils-all/strip-13.d, |
| * testsuite/binutils-all/strip-14.d, |
| * testsuite/binutils-all/testranges.d, |
| * testsuite/binutils-all/x86-64/pr23494a-x32.d, |
| * testsuite/binutils-all/x86-64/pr23494a.d, |
| * testsuite/binutils-all/x86-64/pr23494b-x32.d, |
| * testsuite/binutils-all/x86-64/pr23494b.d, |
| * testsuite/binutils-all/x86-64/pr23494c-x32.d, |
| * testsuite/binutils-all/x86-64/pr23494c.d, |
| * testsuite/binutils-all/x86-64/pr23494d-x32.d, |
| * testsuite/binutils-all/x86-64/pr23494d.d, |
| * testsuite/binutils-all/x86-64/pr23494e-x32.d, |
| * testsuite/binutils-all/x86-64/pr23494e.d, |
| * testsuite/lib/utils-lib.exp (run_dump_test): Replace not-target |
| and not-skip with notarget and noskip. |
| |
| 2018-09-15 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/group-7a.d, |
| * testsuite/binutils-all/group-7b.d, |
| * testsuite/binutils-all/group-7c.d, |
| * testsuite/binutils-all/symbols-1.d, |
| * testsuite/binutils-all/symbols-2.d, |
| * testsuite/binutils-all/symbols-3.d, |
| * testsuite/binutils-all/symbols-4.d: Remove DUMPPROG. |
| |
| 2018-09-14 Alan Modra <amodra@gmail.com> |
| |
| PR binutils/23633 |
| * testsuite/binutils-all/pr23633.d: Don't fail when assembler |
| generates sections other than .text. |
| |
| 2018-09-13 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/23633 |
| * testsuite/binutils-all/objcopy.exp: Run pr23633. |
| * testsuite/binutils-all/pr23633.d: New file. |
| * testsuite/binutils-all/pr23633.list: Likewise. |
| * testsuite/binutils-all/pr23633.s: Likewise. |
| |
| 2018-09-13 Nick Clifton <nickc@redhat.com> |
| |
| PR 23633 |
| * objcopy.c (add_specific_symbols): Do not free the buffer at the |
| end of the function. |
| |
| 2018-09-10 Alan Modra <amodra@gmail.com> |
| |
| PR binutils/23611 |
| * objcopy.c (handle_remove_section_option): Consider .rela and |
| .rel sections for stripping directly as well as attached to the |
| associated section they relocate. |
| * doc/binutils.texi (remove-relocations): Specify that this |
| option removes non-dynamic relocation sections. |
| * testsuite/binutils-all/objcopy.exp |
| (objcopy_remove_relocations_from_executable): New test. |
| |
| 2018-09-03 Nick Clifton <nickc@redhat.com> |
| |
| * po/ja.po: Updated Japanese translation. |
| |
| 2018-08-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/binutils-all/readelf.s-64: Adjusted for |
| .note.gnu.property section. |
| * testsuite/binutils-all/strip-3.d: Also strip |
| .note.gnu.property section. |
| |
| 2018-08-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/binutils-all/i386/compressed-1b.d: Pass |
| -mx86-used-note=no to assembler. |
| * testsuite/binutils-all/i386/compressed-1c.d: Likewise. |
| * testsuite/binutils-all/x86-64/compressed-1b.d: Likewise. |
| * testsuite/binutils-all/x86-64/compressed-1c.d: Likewise. |
| * testsuite/binutils-all/i386/empty.d: Pass -mx86-used-note=yes |
| to assembler and update expected output from "readelf -n". |
| * testsuite/binutils-all/i386/ibt.d: Likewise. |
| * testsuite/binutils-all/i386/pr21231a.d: Likewise. |
| * testsuite/binutils-all/i386/pr21231b.d: Likewise. |
| * testsuite/binutils-all/i386/shstk.d: Likewise. |
| * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/empty.d: Likewise. |
| * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/ibt.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. |
| * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/shstk.d: Likewise. |
| |
| 2018-08-30 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * readelf.c (process_section_headers): Treat SHT_FINI_ARRAY and |
| SHT_PREINIT_ARRAY as relocatable sections. |
| |
| 2018-08-30 Chenghua Xu <paul.hua.gm@gmail.com> |
| |
| * MAINTAINERS: Add myself as a MIPS port maintainer. |
| |
| 2018-08-29 Chenghua Xu <paul.hua.gm@gmail.com> |
| |
| * NEWS: Mention Loongson 2K1000 proccessor support. |
| * readelf.c (get_machine_flags): Handle gs264e. |
| |
| 2018-08-29 Chenghua Xu <paul.hua.gm@gmail.com> |
| |
| * NEWS: Mention Loongson 3A2000/3A3000 proccessor support. |
| * readelf.c (get_machine_flags): Handle gs464e. |
| |
| 2018-08-29 Chenghua Xu <paul.hua.gm@gmail.com> |
| |
| * NEWS: Mention Loongson 3A1000 proccessor support. |
| * readelf.c (get_machine_flags): Rename loongson-3a to gs464. |
| (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. |
| |
| 2018-08-29 Chenghua Xu <paul.hua.gm@gmail.com> |
| |
| * readelf.c (print_mips_ases): Add Loongson EXT2 extension. |
| |
| 2018-08-29 Chenghua Xu <paul.hua.gm@gmail.com> |
| |
| * readelf.c (print_mips_ases): Add Loongson EXT extension. |
| |
| 2018-08-29 Chenghua Xu <paul.hua.gm@gmail.com> |
| |
| * readelf.c (print_mips_ases): Add CAM extension. |
| |
| 2018-08-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * readelf.c (decode_x86_isa): Print <None> if bitmask only |
| contains the GNU_PROPERTY_X86_UINT32_VALID bit. |
| (decode_x86_feature_1): Likewise. |
| (decode_x86_feature_2): Likewise. |
| (print_gnu_property_note): Don't mask out the |
| GNU_PROPERTY_X86_UINT32_VALID bit. |
| * testsuite/binutils-all/i386/pr21231b.d: Updated. |
| * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. |
| |
| 2018-08-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * readelf.c (decode_x86_compat_isa): Break multi-statement line. |
| (decode_x86_isa): Likewise. |
| (decode_x86_feature_2): Likewise. |
| |
| 2018-08-25 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/23499 |
| * readelf.c (get_symbol_version_string): Return _("<corrupt>") |
| for corrupt symbol version info. |
| |
| 2018-08-24 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * readelf.c (decode_x86_compat_isa): New function. |
| (decode_x86_feature_2): Likewise. |
| (decode_x86_isa): Updated for new X86_ISA_1_XXX bits. |
| (decode_x86_feature): Renamed to ... |
| (decode_x86_feature_1): This. Remove the type argument. |
| (print_gnu_property_note): Handle X86_COMPAT_ISA_1_USED, |
| X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, |
| X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and |
| X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED |
| and X86_FEATURE_1_AND. |
| * testsuite/binutils-all/i386/pr21231b.s: Updated to the current |
| GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED |
| values. |
| * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494c.s: Likewise. |
| * testsuite/binutils-all/i386/pr21231b.d: Updated. |
| * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. |
| |
| 2018-08-24 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * readelf.c (print_gnu_property_note): Check the |
| GNU_PROPERTY_X86_UINT32_VALID bit for invalid GNU property note. |
| |
| 2018-08-23 Alan Modra <amodra@gmail.com> |
| |
| * readelf.c (get_ppc64_symbol_other): Return NULL if st_other |
| field contains unrecognised or reserved values. Handle |
| localentry:1 value. |
| |
| 2018-08-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/23536 |
| * Makefile.am (development.exp): New target. |
| (EXTRA_DEJAGNU_SITE_CONFIG): New. |
| (DISTCLEANFILES): Add development.exp. |
| * Makefile.in: Regenerated. |
| * testsuite/binutils-all/objcopy.exp (strip_test): Call |
| prune_warnings to prune BFD output. |
| (strip_test_with_saving_a_symbol): Likewise. |
| (objcopy_test_without_global_symbol): Likewise. |
| * testsuite/lib/binutils-common.exp (prune_warnings_extra): |
| New proc. |
| (prune_warnings): Likewise. |
| |
| 2018-08-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * README-how-to-make-a-release: Document setting "experimental" |
| to false. |
| |
| 2018-08-22 Alan Modra <amodra@gmail.com> |
| |
| * readelf.c (process_file_header): Assign updated values from |
| section_header[0] fields to e_phnum, e_shnum and e_shstrndx |
| during printing of header. Correct e_shstrndx range check. |
| Remove unnecessary casts and use %u rather than %ld for |
| unsigned int header fields. Don't print a random %lx when |
| reporting an unknown EI_VERSION. |
| |
| 2018-08-21 Nick Clifton <nickc@redhat.com> |
| |
| * MAINTAINERS: Note that Arnold Metselaar has retired as the z80 |
| maintainer. |
| |
| 2018-08-21 L. Simon <l.simon@samsung.com> |
| |
| PR 23531 |
| * readelf.c (hppa_process_unwind): Only dump the unwind table if |
| the data was successfully read in. |
| |
| 2018-08-18 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/lib/binutils-common.exp (is_elf64): Use directory of |
| input file for readelf.out. |
| (is_rela): New proc. |
| * testsuite/binutils-all/objcopy.exp (elf64): Set new variable |
| from first result of is_elf64 test. |
| (reloc_format): Set using is_rela. |
| (strip-13): Pass RELOC and ELF64 to assembler. |
| (strip-14, strip-15): Use elf64 rather than calling is_elf64 again. |
| * testsuite/binutils-all/strip-13.d: Run for more targets. |
| * testsuite/binutils-all/strip-13mips64.s: Use RELOC and set |
| addend to zero. |
| * testsuite/binutils-all/strip-13rel.s: Use RELOC and ELF64. |
| Don't add _NONE reloc. |
| * testsuite/binutils-all/strip-13rela.s: Likewise. |
| |
| 2018-08-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/23494 |
| * testsuite/binutils-all/x86-64/pr23494c.s: New file. |
| * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. |
| |
| 2018-08-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/binutils-all/x86-64/pr23494a-x32.d: Skip nacl |
| targets. |
| * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. |
| |
| 2018-08-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/23494 |
| * testsuite/binutils-all/x86-64/pr23494a-x32.d: New file. |
| * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. |
| * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. |
| |
| 2018-08-08 Kevin Buettner <kevinb@redhat.com> |
| |
| * dwarf.c (decode_location_expresion): Add case for |
| DW_OP_GNU_variable_value. |
| |
| 2018-08-06 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * readelf.c (display_arc_attribute): Print Tag_ARC_ATR_version. |
| |
| 2018-08-03 Nick Clifton <nickc@redhat.com> |
| |
| * objcopy.c (merge_gnu_build_notes): Delete empty notes. Merge |
| identical function notes. |
| |
| 2018-08-01 Nick Clifton <nickc@redhat.com> |
| |
| * README-how-to-make-a-release: Add note about regenerating the |
| info files prior to the release. |
| |
| 2018-07-30 Andrew Jenner <andrew@codesourcery.com> |
| |
| * MAINTAINERS (C-SKY): Add Yunhai Shang as co-maintainer. |
| |
| 2018-07-30 Andrew Jenner <andrew@codesourcery.com> |
| |
| * MAINTAINERS (C-SKY): Add Lifang Xia as maintainer. |
| |
| 2018-07-30 Andrew Jenner <andrew@codesourcery.com> |
| |
| * readelf.c: Include elf/csky.h. |
| (guess_is_rela): Handle EM_CSKY. |
| (dump_relocations): Likewise. |
| (get_machine_name): Likewise. |
| (is_32bit_abs_reloc): Likewise. |
| |
| 2018-07-25 Nick Clifton <nickc@redhat.com> |
| |
| * rdcoff.c (parse_coff_struct_type): Free fields array upon early |
| exit. |
| (parse_coff_enum_type): Free names and vals arrays upon early |
| exit. |
| * rddbg.c (read_section_stabs_debugging_info): Free shandle and |
| strings and stabs arrays upon early exit. |
| * readelf.c (get_32bit_section_headers): Free shdrs structure upon |
| early exit. |
| (get_64bit_section_headers): Likewise. |
| (get_32bit_elf_symbols): Generate an error if multiple symbol |
| table index sections are associated with the same symbol section. |
| (get_64bit_elf_symbols): Likewise. |
| (process_dynamic_section): Generate an error if there are multiple |
| dynamic symbol table sections, multiple dynamic string tables or |
| multiple dynamic symbol information sections. |
| |
| 2018-07-24 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated Swedish translation. |
| |
| 2018-07-24 Alan Modra <amodra@gmail.com> |
| |
| PR 23431 |
| * dwarf.c (display_formatted_table): Replace "what" parameter |
| with "is_dir". Expand messages. Fix capitalisation. |
| * testsuite/binutils-all/dw5.W: Update expected output. |
| |
| 2018-07-24 Alan Modra <amodra@gmail.com> |
| |
| PR 23430 |
| * elfcomm.h (struct archive_info): Rename uses_64bit_indicies |
| to uses_64bit_indices. |
| * elfcomm.c (setup_archive): Update uses of above. |
| * readelf.c (process_archive): Likewise. |
| (get_section_type_name): Rename indicies to indices. |
| (get_32bit_elf_symbols, get_64bit_elf_symbols): Likewise. |
| (process_section_groups): Likewise. |
| |
| 2018-07-20 Maciej W. Rozycki <macro@mips.com> |
| |
| * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV |
| ISA maintenance. |
| |
| 2018-07-20 Nick Clifton <nickc@redhat.com> |
| |
| * objcopy.c (add_specific_symbols): Free buffer on exit. |
| (add_redefine_syms_file): Close file handle on exit. |
| (copy_object): Close file handle on early exit. |
| Free buffer on early exit. |
| Free gaps buffers once they are no longer needed. |
| * dwarf.c (display_debug_frames): Free allocated memory on exit. |
| (load_separate_debug_info): Free allocate memory on early exit. |
| |
| 2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com> |
| Maciej W. Rozycki <macro@mips.com> |
| |
| * readelf.c (print_mips_ases): Add MMI extension. |
| |
| 2018-07-19 DJ Delorie <dj@redhat.com> |
| |
| * MAINTAINERS (RL78, RX): Remove myself as maintainer. |
| |
| 2018-07-19 Nick Clifton <nickc@redhat.com> |
| |
| * dwarf.c (read_cie): Free allocated memory before returning with |
| a failure result. |
| |
| 2018-07-16 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> |
| |
| * readelf.c (get_note_type): Fix typo in NT_PPC_TM_CVSX note |
| description. |
| |
| 2018-07-16 Nick Clifton <nickc@redhat.com> |
| |
| * README-how-to-make-a-release: Add note to check for new top |
| level files and add them to the src-release.sh script. |
| |
| 2018-07-14 Nick Clifton <nickc@redhat.com> |
| |
| * README-how-to-make-a-release: Updated with corrections based on |
| the 2.31 release experience. |
| |
| 2018-07-12 Francois H. Theron <francois.theron@netronome.com> |
| |
| * readelf.c (process_section_headers): Don't print section type |
| twice for --section-details. |
| |
| 2018-07-10 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/lib/binutils-common.exp (supports_gnu_unique): Return |
| zero for xgate. |
| |
| 2018-07-06 Nick Clifton <nickc@redhat.com> |
| |
| * readelf.c (same_section): New function. |
| (print_gnu_build_attribute_description): Do not complain about |
| gaps that cross a section boundary. |
| |
| 2018-07-05 Nick Clifton <nickc@redhat.com> |
| |
| * po/bg.po: Updated Bulgarian translation. |
| |
| 2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * NEWS: Use command-line consistently when used in a compount word. |
| * doc/binutils.texi: Likewise and fix trailing whitespace on same |
| line. |
| |
| 2018-06-26 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated Swedish translation. |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2018-06-26 Nick Clifton <nickc@redhat.com> |
| |
| * doc/binutils.texi: Fix spelling mistakes. |
| * README--how-to-make-a-release: Likewise. |
| |
| 2018-06-25 Tom Tromey <tom@tromey.com> |
| |
| * dwarf-mode.el (dwarf-mode-syntax-table): New variable. |
| Bump version number. |
| |
| 2018-06-24 Nick Clifton <nickc@redhat.com> |
| |
| * README-how-to-make-a-release: Update with experiences from |
| making 2.31 branch. |
| * po/binutils.pot: Regenerate. |
| * configure: Regenerate. |
| |
| 2018-06-24 Nick Clifton <nickc@redhat.com> |
| |
| 2.31 branch created. |
| * NEWS: Add marker for 2.31. |
| |
| 2018-06-21 Alan Modra <amodra@gmail.com> |
| |
| * doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign". |
| * doc/Makefile.in: Regenerate. |
| |
| 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> |
| |
| * configure.ac: Remove AC_PREREQ. |
| * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add |
| info-in-builddir no-texinfo.tex. |
| * Makefile.in: Re-generate. |
| * aclocal.m4: Re-generate. |
| * config.in: Re-generate. |
| * configure: Re-generate. |
| * doc/Makefile.in: Re-generate. |
| |
| 2018-06-19 Andreas Schwab <schwab@suse.de> |
| |
| * readelf.c (is_16bit_abs_reloc): Handle R_RISCV_SET16. |
| (is_8bit_abs_reloc): New function. |
| (is_6bit_abs_reloc): New function. |
| (is_6bit_inplace_sub_reloc): New function. |
| (apply_relocations): Use them. Handle 6-bit relocations. |
| |
| 2018-06-14 Faraz Shahbazker <Faraz.Shahbazker@mips.com> |
| |
| * readelf.c (print_mips_ases): Add GINV extension. |
| |
| 2018-06-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/23267 |
| * readelf.c (get_symbol_version_string): Check if the first |
| symbol version is base version. |
| |
| 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> |
| Faraz Shahbazker <Faraz.Shahbazker@mips.com> |
| |
| * readelf.c (print_mips_ases): Add CRC. |
| |
| 2018-06-13 Nick Clifton <nickc@redhat.com> |
| |
| * doc/binutils.texi (objdump): Add missing closing square |
| parenthesis to listing of objcopy's command line options. |
| |
| 2018-06-11 Nick Clifton <nickc@redhat.com> |
| |
| * po/es.po: Updated Spanish translation. |
| |
| 2018-06-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure: Regenerated. |
| |
| 2018-05-31 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/compress.exp (test_gnu_debuglink): Don't |
| set CC_FOR_TARGET. Run test non-native. |
| * testsuite/binutils-all/objdump.exp (test_build_id_debuglink): |
| Likewise. |
| (test_follow_debuglink): Run test non-native. |
| |
| 2018-05-30 Ant Bikeneev <ant.bikineev@gmail.com> |
| |
| PR 23107 |
| * ar.c (display_offsets): New variable. |
| (usage): Add description of 'O' operator. |
| (decode_option): Handle 'O' operator. |
| (print_descr): Pass display_offsets to print_arelt_descr. |
| * arsup.c: Update call to printy_arelt_descr. |
| * objdump.c: Likewise. |
| * bucomm.c (print_arelt_descr): If offsets parameter is true then |
| display offset of archive element within the archive. |
| * bucomm.h: Update prototype for print_arelt_descr. |
| * doc/binutils.texi: Update description of ar command. |
| * NEWS: Mention the new feature. |
| * testsuite/binutils-all/ar.exp: Add text of new feature. |
| |
| 2018-05-28 Alan Modra <amodra@gmail.com> |
| |
| PR 23235 |
| * testsuite/binutils-all/compress.exp (test_gnu_debuglink): Return |
| unsupported rather than fail on compile errors. |
| * testsuite/binutils-all/objdump.exp (test_build_id_debuglink): |
| Likewise. Save and restore CFLAGS_FOR_TARGET. |
| |
| 2018-05-18 Kito Cheng <kito.cheng@gmail.com> |
| |
| * readelf.c (get_machine_flags): Handle EF_RISCV_RVE. |
| |
| 2018-05-18 John Darrington <john@darrington.wattle.id.au> |
| |
| * readelf.c: Add support for s12z architecture. |
| * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z |
| targets. |
| |
| 2018-05-15 Tamar Christina <tamar.christina@arm.com> |
| |
| PR binutils/21446 |
| * doc/binutils.texi (-M): Document AArch64 options. |
| |
| 2018-05-15 Tamar Christina <tamar.christina@arm.com> |
| |
| PR binutils/21446 |
| * doc/binutils.texi (-M): Document AArch64 options. |
| * NEWS: Document notes and warnings. |
| |
| 2018-05-15 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/lib/binutils-common.exp (is_elf_format): Add chorus, |
| cloudabi, fuchsia, kaos and nto. Merge netbsdelf* into *elf*, |
| and *uclinux* into *linux*. |
| * testsuite/binutils-all/objcopy.exp: Accept armeb for rel |
| strip-13 test, exclude arm-vxworks and arm-windiss. |
| |
| 2018-05-10 John Darrington <john@darrington.wattle.id.au> |
| |
| * readelf.c (get_machine_name): EM_S12Z - handle new case. |
| |
| 2018-05-09 Alan Modra <amodra@gmail.com> |
| |
| * od-macho.c (dump_unwind_encoding_x86): Fix typo in last patch. |
| |
| 2018-05-09 Sebastian Rasmussen <sebras@gmail.com> |
| |
| * od-macho.c (dump_unwind_encoding_x86): Adjust for macro renaming. |
| |
| 2018-05-08 Alan Modra <amodra@gmail.com> |
| |
| PR 23141 |
| * objcopy.c (is_strip_section): Strip groups without a valid |
| signature symbol. |
| |
| 2018-05-07 Alan Modra <amodra@gmail.com> |
| |
| PR 23142 |
| * objcopy.c (group_signature): Don't accept groups that use a |
| symbol table other than the one we've read. |
| |
| 2018-04-30 Francois H. Theron <francois.theron@netronome.com> |
| |
| * readelf.c: Very basic support for EM_NFP and its section types. |
| * testsuite/binutils-all/nfp: New directory. |
| * testsuite/binutils-all/nfp/objdump.exp: New file. Run new |
| tests. |
| * testsuite/binutils-all/nfp/test2_ctx8.d: New file. |
| * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. |
| * testsuite/binutils-all/nfp/test1.d: New file. |
| * testsuite/binutils-all/nfp/nfp6000.nffw: New file. |
| * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. |
| * NEWS: Mention the new support. |
| |
| 2018-04-27 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/lib/binutils-common.exp (match_target): New procedure. |
| * testsuite/lib/utils-lib.exp (run_dump_test): Use it in place |
| of `istarget' for matching with `target', `not-target', `skip' |
| and `not-skip' options. |
| |
| 2018-04-26 Nick Clifton <nickc@redhat.com> |
| |
| * readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a |
| 32-bit absolute reloc for the HPPA target. |
| * testsuite/binutils-all/note-5.d: New test. |
| * testsuite/binutils-all/note-5.s: Source file for new test. |
| * testsuite/binutils-all/objcopy.exp: Run new test. |
| |
| 2018-04-25 Christophe Lyon <christophe.lyon@st.com> |
| |
| * testsuite/binutils-all/elfedit-2.d: Accept arm*-*-uclinuxfdpiceabi. |
| * testsuite/binutils-all/elfedit-3.d: Likewise. |
| * testsuite/binutils-all/objcopy.exp: Likewise. |
| * testsuite/binutils-all/strip-3.d: Likewise. |
| * testsuite/lib/binutils-common.exp: Likewise. |
| |
| 2018-04-25 Christophe Lyon <christophe.lyon@st.com> |
| Mickaël Guêné <mickael.guene@st.com> |
| |
| * readelf.c (decode_ARM_machine_flags): Support EF_ARM_PIC. |
| (get_osabi_name): Support ELFOSABI_ARM_FDPIC. |
| |
| 2018-04-25 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/arm/objdump.exp: Remove arm-aout and |
| arm-coff support. |
| * testsuite/binutils-all/objcopy.exp: Likewise. |
| * testsuite/lib/binutils-common.exp: Likewise. |
| |
| 2018-04-18 Nick Clifton <nickc@redhat.com> |
| |
| PR 23062 |
| * dwarf.c (read_and_display_attr_value): Replace assertions with |
| test and warning message. |
| |
| 2018-04-18 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/lib/binutils-common.exp: Remove support for assorted |
| aout targets. |
| |
| 2018-04-17 Nick Clifton <nickc@redhat.com> |
| |
| PR 23063 |
| * readelf.c (print_symbol): If the width is zero, return straight |
| away. |
| |
| PR 23064 |
| * dwarf.c (process_cu_tu_index): Test for a potential buffer |
| overrun before copying signature pointer. |
| |
| 2018-04-17 Alan Modra <amodra@gmail.com> |
| |
| * readelf.c: Revert 2018-04-16 and 2018-04-11 changes. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * readelf.c (get_machine_name): Correct typo. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac: Remove arm-epoc-pe support. |
| * dlltool.c: Likewise. |
| * configure: Regenerate. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/lib/binutils-common.exp: Remove sparc-aout and |
| sparc-coff support. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff |
| support. |
| * testsuite/binutils-all/copy-3.d: Likewise. |
| * testsuite/binutils-all/objcopy.exp: Likewise. |
| * testsuite/lib/binutils-common.exp: Likewise. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/objcopy.exp: Remove w65 support. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/objdump.exp: Remove we32k support. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * MAINTAINERS (Mark Kettenis): Move to past maintainers. |
| * testsuite/binutils-all/objdump.exp: Remove m88k support. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * readelf.c: Remove i370 support. |
| * testsuite/binutils-all/objdump.exp: Likewise. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/objcopy.exp: Remove h8500 support. |
| * testsuite/lib/binutils-common.exp: Likewise. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/objcopy.exp: Remove h8300-coff support. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.am: Remove IEEE 695 support. |
| * budbg.h: Likewise. |
| * doc/binutils.texi: Likewise. |
| * makefile.vms: Likewise. |
| * objcopy.c: Likewise. |
| * objdump.c: Likewise. |
| * rddbg.c: Likewise. |
| * ieee.c: Delete. |
| * Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/copy-2.d: Remove newsos3 support. |
| * testsuite/binutils-all/nm.exp: Likewise. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * .gitignore: Remove netware support. |
| * Makefile.am: Likewise. |
| * configure.ac: Likewise. |
| * doc/Makefile.am: Likewise. |
| * doc/binutils.texi: Likewise. |
| * testsuite/binutils-all/nm.exp: Likewise. |
| * nlmconv.c: Delete. |
| * nlmconv.h: Delete. |
| * nlmheader.y: Delete. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2018-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/objdump.exp: Remove tahoe support. |
| |
| 2018-04-14 Alan Modra <amodra@gmail.com> |
| |
| * readelf.c (get_machine_name): Revert 2018-04-11 change. |
| |
| 2018-04-12 Nick Clifton <nickc@redhat.com> |
| |
| PR 23050 |
| * readelf.c (process_dynamic_section): Correct dynamic string |
| table size calculation. |
| |
| 2018-04-11 Alan Modra <amodra@gmail.com> |
| |
| * ieee.c: Remove i960 support. |
| * od-macho.c: Remove i860 support. |
| * readelf.c: Remove i860 and i960 support. |
| * testsuite/binutils-all/objcopy.exp: Likewise. |
| * testsuite/binutils-all/objdump.exp: Likewise. |
| * testsuite/lib/binutils-common.exp: Likewise. |
| |
| 2018-04-11 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/lib/binutils-common.exp (is_elf_format): Also return |
| 1 for `*-*-lynxos*' and `*-*-symbianelf*' targets. |
| |
| 2018-04-10 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/objcopy.exp (strip-14, strip-15): Choose |
| reloc=11 for pru and reloc=50 for nds32. |
| * testsuite/binutils-all/strip-15.d: Accept 0xb reloc number. |
| |
| 2018-04-09 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/binutils-all/strip-15.d: New test. |
| * testsuite/binutils-all/strip-15rel.s: New test source. |
| * testsuite/binutils-all/strip-15rela.s: New test source. |
| * testsuite/binutils-all/strip-15mips64.s: New test source. |
| * testsuite/binutils-all/objcopy.exp: Run the new test. |
| |
| 2018-04-09 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/binutils-all/strip-14.d: New test. |
| * testsuite/binutils-all/strip-14rel.s: New test source. |
| * testsuite/binutils-all/strip-14rela.s: New test source. |
| * testsuite/binutils-all/strip-14mips64.s: New test source. |
| * testsuite/binutils-all/objcopy.exp: Run the new test. |
| |
| 2018-04-06 Tom Tromey <tom@tromey.com> |
| |
| * dwarf.c (read_and_display_attr_value): Add missing DW_LANG |
| constants from DWARF 5. |
| |
| 2018-04-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/22318 |
| * configure: Regenerated. |
| |
| 2018-04-05 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/binutils-all/strip-13mips64.s: Use `.dc.l' rather |
| than `.dc.w' in second relocation. |
| |
| 2018-04-05 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/binutils-all/strip-13.d: Also expect `unsupported |
| relocation type 0x8f' error message. |
| |
| 2018-04-05 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/binutils-all/strip-13.s: Rename to... |
| * testsuite/binutils-all/strip-13rela.s: ... this. |
| * testsuite/binutils-all/strip-13rel.s: New test source. |
| * testsuite/binutils-all/strip-13mips64.s: New test source. |
| * testsuite/binutils-all/strip-13.d: Remove `arm-*', `d10v-*', |
| `dlx-*' and `xgate-*' from `not-target' list. Add `m6811-*' and |
| `m68hc11-*' to `not-target' list. |
| * testsuite/binutils-all/objcopy.exp: Switch between sources for |
| `strip-13'. |
| |
| 2018-04-05 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/binutils-all/strip-13.s: Use 143 (0x8f) rather than |
| 241 (0xf1) for the relocation number and RELA addend. |
| * testsuite/binutils-all/strip-13.d: Remove `hppa*-*' from the |
| `not-target' list. |
| |
| 2018-04-04 John David Anglin <danglin@gcc.gnu.org> |
| |
| * MAINTAINERS: Update my e-mail address. |
| |
| 2018-04-04 Nick Clifton <nickc@redhat.com> |
| |
| * MAINTAINERS: Move Jason Eckhardt to past maintainers section. |
| |
| 2018-03-23 Nick Clifton <nickc@redhat.com> |
| |
| * readelf.c (get_symbol_for_build_attribute): Skip ARM mapping |
| symbols. |
| (print_gnu_build_attribute_description): If no file start symbol |
| could be found, look for one two bytes into the file. |
| * testsuite/binutils-all/note-4-64.s: Set the address of the file |
| start symbol to two bytes into the file. |
| * testsuite/binutils-all/note-4-32.s: Likewise. |
| |
| 2018-03-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * readelf.c (process_dynamic_section): Also dump DF_1_KMOD, |
| DF_1_WEAKFILTER and DF_1_NOCOMMON. |
| |
| 2018-03-20 Nick Clifton <nickc@redhat.com> |
| |
| * po/es.po: Updated Spanish translation. |
| * po/ru.po: Updated Russian translation. |
| |
| 2018-03-13 Nick Clifton <nickc@redhat.com> |
| |
| PR 22957 |
| * stabs.c (pop_binincl): Fail if the file index is off the end of |
| the stack. |
| |
| 2018-03-13 Nick Clifton <nickc@redhat.com> |
| |
| PR 22955 |
| * stabs.c (parse_number): Add p_end parameter and use it to check |
| the validity of the pp parameter. Add checks to prevent walking |
| off the end of the string buffer. |
| (parse_stab_string): Likewise. |
| (parse_stab_type): Likewise. |
| (parse_stab_type_number): Likewise. |
| (parse_stab_range_type): Likewise. |
| (parse_stab_sun_builtin_type): Likewise. |
| (parse_stab_sun_floating_type): Likewise. |
| (parse_stab_enum_type): Likewise. |
| (parse_stab_struct_type): Likewise. |
| (parse_stab_baseclasses): Likewise. |
| (parse_stab_struct_fields): Likewise. |
| (parse_stab_cpp_abbrev): Likewise. |
| (parse_stab_one_struct_field): Likewise. |
| (parse_stab_members): Likewise. |
| (parse_stab_tilde_field): Likewise. |
| (parse_stab_array_type): Likewise. |
| |
| * parse_stab: Compute the end of the string and then pass it on to |
| individual parser functions. |
| |
| 2018-03-07 Paul Pluzhnikov <ppluzhnikov@google.com> |
| |
| PR binutils/22923 |
| * binutils/readelf.c (get_ver_flags): Expand buffer to avoid |
| overflow. |
| |
| 2018-03-07 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac: Add objdump_private_desc_xcoff for rs6000. |
| * configure: Regenerate. |
| |
| 2018-03-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/22911 |
| * objdump.c (is_significant_symbol_name): Return TRUE for all |
| .plt* sections. |
| (find_symbol_for_address): Replace linear search with binary |
| search on dynamic relocations. |
| |
| 2018-03-01 Nick Clifton <nickc@redhat.com> |
| |
| PR 22905 |
| * dwarf.c (display_debug_ranges): Check that the offset loaded |
| from the range_entry structure is valid. |
| |
| 2018-03-01 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac (ALL_LINGUAS): Add sr. Sort. |
| * configure: Regenerate. |
| |
| 2018-02-27 Nick Clifton <nickc@redhat.com> |
| |
| * po/pt.po: New Portuguese translation. |
| * configure.ac (ALL_LINGUAS): Add pt. |
| * configure: Regenerate. |
| |
| 2018-02-27 Nick Clifton <nickc@redhat.com> |
| |
| PR 22875 |
| * objcopy.c (copy_object): Check the error status after marking |
| symbols used in relocations. |
| * testsuite/binutils-all/strip-13.s: New test source file. |
| * testsuite/binutils-all/strip-13.s: New test driver file. |
| * testsuite/binutils-all/objcopy.exp: Run the new test. |
| |
| 2018-02-26 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/mips/mips-reginfo-n32.d, |
| * testsuite/binutils-all/mips/mips-reginfo.d: Update. |
| |
| 2018-02-23 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/binutils-all/mips/mips-reginfo-n32.d, |
| * testsuite/binutils-all/mips/mips-reginfo.d: Update. |
| |
| 2018-02-20 Ronald Hoogenboom <hoogenboom30@zonnet.nl> |
| |
| * doc/binutils.texi (objcopy): Add missing closing square |
| parenthesis to listing of objcopy's command line options. |
| |
| 2018-02-19 Matthias Klose <doko@debian.org> |
| |
| * strings.c (long_options): Include-all-whitespace does not take |
| an extra agument. |
| |
| 2018-02-13 Alan Modra <amodra@gmail.com> |
| |
| PR 22836 |
| * testsuite/binutils-all/group-7.s, |
| * testsuite/binutils-all/group-7a.d, |
| * testsuite/binutils-all/group-7b.d, |
| * testsuite/binutils-all/group-7c.d: New tests. |
| * testsuite/binutils-all/objcopy.exp: Run them. |
| |
| 2018-02-08 Nick Clifton <nickc@redhat.com> |
| |
| PR 22802 |
| * dwarf.c (load_separate_debug_file): Return early if the user is |
| not interested in debug links. |
| |
| 2018-02-06 Nick Clifton <nickc@redhat.com> |
| |
| PR 22793 |
| * readelf.c (find_section): Replace assertion with test and return |
| of NULL. |
| (find_section_by_address): Add test of section header table |
| existance. |
| (find_section_by_type): Likewise. |
| (find_section_in_set): Likewise. |
| |
| 2018-02-05 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/binutils-all/mips/mips-reginfo.d: New test. |
| * testsuite/binutils-all/mips/mips-reginfo-n32.d: New test. |
| * testsuite/binutils-all/mips/mips-reginfo.s: New test source. |
| * testsuite/binutils-all/mips/mips.exp: Run the new tests. |
| |
| 2018-02-05 Maciej W. Rozycki <macro@mips.com> |
| |
| * testsuite/config/default.exp (binutils_run): Document |
| `binutils_run_status'. |
| * testsuite/lib/utils-lib.exp (default_binutils_run): Likewise, |
| and set it. |
| (run_dump_test): Add `error', `error_output', `warning' and |
| `warning_output' options. Update documentation accordingly. |
| |
| 2018-02-02 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * dwarf.c (dwarf_regnames_riscv): New register name table. |
| (init_dwarf_regnames_riscv): New function. |
| (init_dwarf_regnames): Add call to initialise RiscV register |
| names. |
| * dwarf.h (init_dwarf_regnames_riscv): Declare. |
| * objdump.c (dump_dwarf): Add call to initialise RiscV register |
| names. |
| |
| 2018-02-01 Alan Modra <amodra@gmail.com> |
| |
| PR 22769 |
| * objdump.c (load_specific_debug_section): Check for overflow |
| when adding one to section size for a string section terminator. |
| |
| 2018-01-30 Nick Clifton <nickc@redhat.com> |
| |
| PR 22734 |
| * doc/binutils.texi (nm): Update description to point out that |
| zero-initialized values can also be shown as type B, b, S or s |
| since they can be stored in the BSS section. |
| |
| 2018-01-30 Alan Modra <amodra@gmail.com> |
| |
| * objcopy.c (merge_gnu_build_notes): Use (bfd_vma) -1 as |
| "artificially large" end address. |
| |
| 2018-01-28 Nick Clifton <nickc@redhat.com> |
| |
| * README-how-to-make-a-release: Add note about checking gpg key |
| and the results of gnupload. |
| |
| 2018-01-27 Nick Clifton <nickc@redhat.com> |
| |
| * README-how-to-make-a-release: Add details on how to actually |
| make the release. |
| |
| 2018-01-26 Nick Clifton <nickc@redhat.com> |
| |
| * README-how-to-make-a-release: Add more details on updating |
| version numbers. |
| |
| 2018-01-22 Maciej W. Rozycki <macro@mips.com> |
| |
| * doc/binutils.texi (objcopy): Fix a typo in `--rename-section' |
| option description. |
| |
| 2018-01-22 Maciej W. Rozycki <macro@mips.com> |
| |
| * MAINTAINERS: Update my company e-mail address. |
| |
| 2018-01-22 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated Swedish translation. |
| |
| 2018-01-18 Nick Clifton <nickc@redhat.com> |
| |
| * po/bg.po: Updated Bulgarian translation. |
| |
| 2018-01-16 Joel Brobecker <brobecker@adacore.com> |
| |
| * README-how-to-make-a-release: Add reminder to update the |
| branch name in gdbadmin's crontab on sourceware. |
| |
| 2018-01-16 Joel Brobecker <brobecker@adacore.com> |
| |
| * README-how-to-make-a-release: Remove trailing spaces. |
| |
| 2018-01-16 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po: Updated French translation. |
| |
| 2018-01-15 Nick Clifton <nickc@redhat.com> |
| |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2018-01-13 Nick Clifton <nickc@redhat.com> |
| |
| * README-how-to-make-a-release: Update notes. |
| * po/binutils.pot: Regenerated. |
| |
| 2018-01-13 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| |
| 2018-01-13 Nick Clifton <nickc@redhat.com> |
| |
| 2.30 branch created. |
| * NEWS: Add marker for 2.30. |
| |
| 2018-01-12 Nick Clifton <nickc@redhat.com> |
| |
| * README-how-to-make-a-release: Add notes on how to make the |
| branch and prelease snapshot. |
| * BRANCHES: Add binutils-2_29-branch. |
| |
| 2018-01-10 Nick Clifton <nickc@redhat.com> |
| |
| * MAINTAINERS: Note that it is now the configure.ac file and not |
| the configure.in file that needs to be kept in sync with gcc. |
| Add a note about sending patches for libiberty to gcc. |
| |
| 2018-01-03 Nick Clifton <nickc@redhat.com> |
| |
| * objcopy.c (merge_gnu_build_notes): Add cast to maximum address |
| constants. |
| |
| 2018-01-03 Nick Clifton <nickc@redhat.com> |
| |
| * objcopy.c (objcopy_internal_note): New structure. |
| (gap_exists): New function. |
| (is_open_note): New function. |
| (is_func_note): New function. |
| (is_64bit): New function. |
| (merge_gnu_build_notes): Handle v3 notes. Do not merge |
| if there are relocations against the notes. |
| * readelf.c (get_note_type): Use short names for build attribute |
| notes. |
| (print_symbol_for_build_attribute): Rename to |
| get_symbol_for_build_attribute. Returns the found symbol rather |
| than printing it. |
| (print_gnu_build_attribute_description): Maintain address ranges |
| for function notes as well as global notes. Handle v3 notes. |
| (print_gnu_build_attribute_name): Use more space for printing the |
| name in wide mode. |
| * testsuite/binutils-all/note-2-32.s: Use .dc.l instead of .word. |
| Eliminate symbol references in order to remove the need for |
| relocations. |
| * testsuite/binutils-all/note-2-64.s: Likewise. |
| * testsuite/binutils-all/note-3-32.s: Add a size to the note_1 |
| symbol. |
| * testsuite/binutils-all/note-3-64.s: Likewise. |
| * testsuite/binutils-all/mips/mips-note-2r-n32.d: Update expected |
| output. |
| * testsuite/binutils-all/mips/mips-note-2r-n64.d: Likewise. |
| * testsuite/binutils-all/mips/mips-note-2r.d: Likewise. |
| * testsuite/binutils-all/note-2-32.d: Likewise. |
| * testsuite/binutils-all/note-2-64.d: Likewise. |
| * testsuite/binutils-all/note-3-32.d: Likewise. |
| * testsuite/binutils-all/note-3-64.d: Likewise. |
| * testsuite/binutils-all/note-4-64.s: New test. Checks v3 notes. |
| * testsuite/binutils-all/note-4-32.s: New test. |
| * testsuite/binutils-all/note-4-64.d: New test result file. |
| * testsuite/binutils-all/note-4-32.d: New test result file. |
| |
| 2018-01-03 Alan Modra <amodra@gmail.com> |
| |
| Update year range in copyright notice of all files. |
| |
| For older changes see ChangeLog-2017 |
| |
| Copyright (C) 2018 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
