| 2024-07-20 Nick Clifton <nickc@redhat.com> |
| |
| * 2.43 branch point. |
| |
| 2024-02-19 Will Hawkins <hawkinsw@obs.cr> |
| |
| * config/tc-bpf.c (parse_expression): Change switch to if so that |
| error condition is handled. |
| * testsuite/gas/bpf/indcall-badoperand.d: New test. |
| * testsuite/gas/bpf/indcall-badoperand.l: Likewise. |
| * testsuite/gas/bpf/indcall-badoperand.s: Likewise. |
| * testsuite/gas/bpf/bpf.exp: Invoke new test. |
| |
| 2024-02-19 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.c (md_assemble): Fix to take into account that |
| parse_expression can return NULL. |
| (PARSE_ERROR): Avoid passing invalid length to parse_error. |
| |
| 2024-02-15 Will Hawkins <hawkinsw@obs.cr> |
| |
| * testsuite/gas/bpf/indcall-1-pseudoc.d: Do not select xbpf cpu |
| version. |
| * testsuite/gas/bpf/indcall-1.d: Likewise. |
| |
| 2024-02-14 Yuriy Kolerov <ykolerov@synopsys.com> |
| |
| * config/tc-arc.c (is_br_jmp_insn_p): Add check against "DBNZ". |
| |
| 2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * doc/c-bpf.texi (BPF Instructions): There is no indirect 64-bit |
| load instruction. |
| (BPF Instructions): There is no absolute 64-bit load instruction. |
| * testsuite/gas/bpf/mem.s: Update test accordingly. |
| * testsuite/gas/bpf/mem-be-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/mem-be.d: Likewise. |
| * testsuite/gas/bpf/mem-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/mem-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/mem.d: Likewise. |
| * testsuite/gas/bpf/mem.s: Likewise. |
| |
| 2024-01-15 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| * po/gas.pot: Regenerate. |
| |
| 2024-01-15 Nick Clifton <nickc@redhat.com> |
| |
| * 2.42 branch point. |
| |
| 2023-11-30 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.h (DOUBLESLASH_LINE_COMMENTS): Define. |
| * testsuite/gas/bpf/comments.s: New file. |
| * testsuite/gas/bpf/comments.d: Likewise. |
| * testsuite/gas/bpf/comments-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/comments-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/bpf.exp: Run comments and comments-pseudoc. |
| * doc/c-bpf.texi (BPF Special Characters): Document // comments. |
| * NEWS: Update. |
| |
| 2023-11-28 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * NEWS: Add entry about change of comment syntax in the BPF |
| assembler. |
| |
| 2023-11-28 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.c: Semicolon does not start a comment, but |
| separates multiple commands on a single line. |
| * testsuite/gas/bpf/alu-pseudoc.s: Adapt test accordingly. |
| * testsuite/gas/bpf/spacing-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/offset16-overflow.s: Likewise. |
| * testsuite/gas/bpf/jump-relax-jump.s: Likewise. |
| * testsuite/gas/bpf/jump-relax-ja.s: Likewise. |
| * testsuite/gas/bpf/imm32-overflow.s: Likewise. |
| * testsuite/gas/bpf/disp32-overflow.s: Likewise. |
| * testsuite/gas/bpf/disp16-overflow-relax.s: Likewise. |
| * testsuite/gas/bpf/disp16-overflow.s: Likewise. |
| * doc/c-bpf.texi (BPF Special Characters): Update. |
| |
| 2023-11-23 YunQiang Su <yunqiang.su@cipunited.com> |
| |
| * testsuite/gas/mips/elf-rel.s: Use addiu in place of addi. |
| * testsuite/gas/mips/elf-rel.d: Update expected output. |
| * testsuite/gas/mips/elfel-rel.d: Likewise. |
| |
| 2023-11-23 YunQiang Su <yunqiang.su@cipunited.com> |
| |
| * testsuite/gas/mips/branch-section-1.d: Allow for r6 encoding of |
| JR instruction. |
| * testsuite/gas/mips/branch-weak-1.d: Likewise. |
| * testsuite/gas/mips/option-pic-1.d: Likewise. |
| * testsuite/gas/mips/option-pic-relax-0.d: Likewise. |
| * testsuite/gas/mips/option-pic-relax-1.d: Likewise. |
| |
| 2023-11-18 Jose E. Marchesi <jemarch@gnu.org> |
| |
| * config/tc-bpf.c (parse_bpf_register): Move before |
| bpf_parse_name. |
| (bpf_parse_name): Do not allow using symbols that are also |
| register names as operands in pseudo-c syntax. |
| * testsuite/gas/bpf/regs-for-symbols-pseudoc.d: New file. |
| * testsuite/gas/bpf/regs-for-symbols-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/regs-for-symbols-pseudoc.l: Likewise. |
| * doc/c-bpf.texi (BPF Registers): Document that it is not possible |
| to refer to register names as symbols in instruction operands. |
| |
| 2023-11-15 YunQiang Su <yunqiang.su@cipunited.com> |
| |
| * testsuite/gas/mips/mips.exp (mips_arch_create): Add "--defsym |
| r6=" to as_flags for r6 targets. |
| |
| 2023-11-15 Arsen Arsenović <arsen@aarsen.me> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| * po/Make-in ($(srcdir)/$(PACKAGE).pot): Output to a .pot |
| temporary file, to suppress xgettext checking charset names. |
| |
| 2023-11-15 YunQiang Su <yunqiang.su@cipunited.com> |
| |
| * testsuite/gas/elf/elf.exp (section2): Add -mpdr option to |
| assembler command line for mips-irix targets. |
| * testsuite/gas/mips/elf-rel26.d: Add -mpdr command line option. |
| * testsuite/gas/mips/mips16-e.d: Likewise. |
| * testsuite/gas/mips/mips16-f.d: Likewise. |
| * testsuite/gas/mips/mips16-hilo-match.d: Likewise. |
| * testsuite/gas/mips/mips16-e-irix.d: Likewise. |
| * testsuite/gas/mips/call-nonpic-1.d: Adjust regexp to allow for |
| mips-irix targets. |
| * testsuite/gas/mips/irix-no-pdr.d: New test file. |
| * testsuite/gas/mips/mips.exp: Run new test for mips-irix |
| targets. |
| |
| 2023-10-30 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/bpf/alu-pseudoc.s: Add test to make sure C-like |
| suffix `ll' is not interpreted as lddw syntax. |
| * testsuite/gas/bpf/alu-pseudoc.d: Update expected results. |
| * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise. |
| |
| 2023-10-02 Nick Clifton <nickc@redhat.com> |
| |
| PR 30861 |
| * config/tc-riscv.c (riscv_insert_uleb128_fixes): Release |
| duplicated memory. |
| |
| 2023-09-18 Jacob Navia <jacob@jacob.remcomp.fr> |
| |
| * config/tc-riscv.c (riscv_ip_hardcode): Fully initialise the |
| allocated riscv_opcode structure. |
| |
| 2023-08-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.c (check_immediate_overflow): New function. |
| (encode_insn): Use check_immediate_overflow. |
| (md_assemble): Do not relax instructions with |
| constant disp16 fields. |
| * doc/c-bpf.texi (BPF Instructions): Add note about how numerical |
| literal values are interpreted for instruction immediate operands. |
| * testsuite/gas/bpf/disp16-overflow.s: Adapt accordingly. |
| * testsuite/gas/bpf/jump-relax-jump.s: Likewise. |
| * testsuite/gas/bpf/jump-relax-jump.d: Likewise. |
| * testsuite/gas/bpf/jump-relax-jump-be.d: Likewise. |
| * testsuite/gas/bpf/jump-relax-ja.s: Likewise. |
| * testsuite/gas/bpf/jump-relax-ja.d: Likewise. |
| * testsuite/gas/bpf/jump-relax-ja-be.d: Likewise. |
| * testsuite/gas/bpf/disp16-overflow-relax.l: Likewise. |
| * testsuite/gas/bpf/imm32-overflow.s: Likewise. |
| * testsuite/gas/bpf/disp32-overflow.s: Likewise. |
| * testsuite/gas/bpf/disp16-overflow.l: Likewise. |
| * testsuite/gas/bpf/disp32-overflow.l: Likewise. |
| * testsuite/gas/bpf/imm32-overflow.l: Likewise. |
| * testsuite/gas/bpf/offset16-overflow.l: Likewise. |
| |
| 2023-07-30 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.h (elf_tc_final_processing): Define. |
| * config/tc-bpf.c (bpf_elf_final_processing): New function. |
| |
| 2023-07-30 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.c (signed_overflow): Copy function from |
| tc-aarch64.c. |
| (encode_insn): Check for overflow in constant immediates. |
| (add_relaxed_insn): Pass relax argument to encode_insn. |
| (add_fixed_insn): Likewise. |
| * testsuite/gas/bpf/disp16-overflow.d: New file. |
| * testsuite/gas/bpf/disp16-overflow.s: Likewise. |
| * testsuite/gas/bpf/disp16-overflow.l: Likewise. |
| * testsuite/gas/bpf/disp32-overflow.d: Likewise. |
| * testsuite/gas/bpf/disp32-overflow.s: Likewise. |
| * testsuite/gas/bpf/disp32-overflow.l: Likewise. |
| * testsuite/gas/bpf/imm32-overflow.d: Likewise. |
| * testsuite/gas/bpf/imm32-overflow.s: Likewise. |
| * testsuite/gas/bpf/imm32-overflow.l: Likewise. |
| * testsuite/gas/bpf/offset16-overflow.d: Likewise. |
| * testsuite/gas/bpf/offset16-overflow.s: Likewise. |
| * testsuite/gas/bpf/offset16-overflow.l: Likewise. |
| * testsuite/gas/bpf/disp16-overflow-relax.d: Likewise. |
| * testsuite/gas/bpf/disp16-overflow-relax.l: Likewise. |
| * testsuite/gas/bpf/disp16-overflow-relax.s: Likewise. |
| * testsuite/gas/bpf/jump-relax-jump-be.d: New file. |
| * testsuite/gas/bpf/bpf.exp: Run new tests. |
| |
| 2023-07-28 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| PR gas/30690 |
| * config/tc-bpf.c (struct bpf_insn): Add fields is_relaxable and |
| relaxed_exp. |
| (enum options): Add OPTION_NO_RELAX. |
| (md_longopts): Likewise for -mno-relax. |
| (do_relax): New global. |
| (md_parse_option): Handle OPTION_NO_RELAX. |
| (RELAX_BRANCH_ENCODE): Define. |
| (RELAX_BRANCH_P): Likewise. |
| (RELAX_BRANCH_LENGTH): Likewise. |
| (RELAX_BRANCH_CONST): Likewise. |
| (RELAX_BRANCH_UNCOND): Likewise. |
| (relaxed_branch_length): New function. |
| (md_estimate_size_before_relax): Likewise. |
| (read_insn_word): Likewise. |
| (encode_int16): Likewise. |
| (encode_int32): Likewise. |
| (write_insn_bytes): Likewise. |
| (md_convert_frag): Likewise. |
| (encode_insn): Likewise. |
| (install_insn_fixups): Likewise. |
| (add_fixed_insn): Likewise. |
| (add_relaxed_insn): Likewise. |
| (md_assemble): Move instruction encoding logic to the above |
| new functions. |
| * testsuite/gas/bpf/jump-relax-ja.d: New test. |
| * testsuite/gas/bpf/jump-relax-ja-be.d: Likewise. |
| * testsuite/gas/bpf/jump-relax-ja.s: And corresponding source. |
| * testsuite/gas/bpf/jump-relax-jump.d: New test. |
| * testsuite/gas/bpf/jump-relax-jump-be.d: Likewise. |
| * testsuite/gas/bpf/jump-relax-jump.s: And corresponding source. |
| * testsuite/gas/bpf/bpf.exp: Run new tests. |
| * doc/c-bpf.texi (BPF Options): Document -mno-relax. |
| |
| 2023-07-26 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/bpf/alu.s: Add test for NEGI and NEG32I. |
| * testsuite/gas/bpf/alu32.s: Likewise. |
| * testsuite/gas/bpf/alu-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu32-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu.d: Add expected results. |
| * testsuite/gas/bpf/alu-be.d: Likewise. |
| * testsuite/gas/bpf/alu-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu32.d: Likewise. |
| * testsuite/gas/bpf/alu32-be.d: Likewise. |
| * testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise. |
| |
| 2023-07-26 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/bpf/alu.s: The register neg instruction gets only |
| one argument. |
| * testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu32-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu32-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu-be.d: Likewise. |
| * testsuite/gas/bpf/alu.d: Likewise. |
| * testsuite/gas/bpf/alu32-be.d: Likewise. |
| * testsuite/gas/bpf/alu32.d: Likewise. |
| * testsuite/gas/bpf/alu32.s: Likewise. |
| * doc/c-bpf.texi (BPF Instructions): Update accordingly. |
| |
| 2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * doc/c-bpf.texi (BPF Instructions): Document BSWAP* instructions. |
| * testsuite/gas/bpf/alu.s: Test BSWAP{16,32,64} instructions. |
| * testsuite/gas/bpf/alu.d: Likewise. |
| * testsuite/gas/bpf/alu-be.d: Likewise. |
| * testsuite/gas/bpf/alu-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise. |
| |
| 2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * doc/c-bpf.texi (BPF Instructions): The pseudoc syntax for MOVS* |
| doesn't use `s=' but `='. |
| |
| 2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * doc/c-bpf.texi (BPF Instructions): Fix pseudoc syntax for MOVS* |
| and LDXS* instructions. |
| * testsuite/gas/bpf/mem-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/mem-be-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/mem-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu32-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu32-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise. |
| |
| 2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.c (struct bpf_insn): New field `id'. |
| (md_assemble): Save the ids of successfully parsed instructions |
| and use the new BFD_RELOC_BPF_DISPCALL32 whenever appropriate. |
| (md_apply_fix): Adapt to the new BFD reloc. |
| * testsuite/gas/bpf/jump.s: Test JAL. |
| * testsuite/gas/bpf/jump.d: Likewise. |
| * testsuite/gas/bpf/jump-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/jump-be.d: Likewise. |
| * testsuite/gas/bpf/jump-be-pseudoc.d: Likewise. |
| * doc/c-bpf.texi (BPF Instructions): Document new instruction |
| jal/gotol. |
| Document new operand type disp32. |
| |
| 2023-07-21 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/bpf/mem.s: Add signed load instructions. |
| * testsuite/gas/bpf/mem-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/mem.d: Likewise. |
| * testsuite/gas/bpf/mem-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/mem-be.d: Likewise. |
| * doc/c-bpf.texi (BPF Instructions): Document the signed load |
| instructions. |
| |
| 2023-07-21 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/bpf/alu.s: Test movs instructions. |
| * testsuite/gas/bpf/alu-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu32.s: Likewise for movs32 instruction. |
| * testsuite/gas/bpf/alu32-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu.d: Add expected results. |
| * testsuite/gas/bpf/alu32.d: Likewise. |
| * testsuite/gas/bpf/alu-be.d: Likewise. |
| * testsuite/gas/bpf/alu32-be.d: Likewise. |
| * testsuite/gas/bpf/alu-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu32-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise. |
| |
| 2023-07-03 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/gas.pot: Regenerate. |
| |
| 2023-07-03 Nick Clifton <nickc@redhat.com> |
| |
| 2.41 Branch Point. |
| |
| 2023-06-26 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/gas/aarch64/bfloat16-directive-be.d: Adjust regexps |
| to allow for non-ELF based toolchains. |
| * testsuite/gas/aarch64/bfloat16-directive-le.d: Likewise. |
| * testsuite/gas/aarch64/optional.d: Likewise. |
| * testsuite/gas/aarch64/pr20364.d: Likewise. |
| * testsuite/gas/aarch64/adr_1.d: Skip for non-ELF based toolchains. |
| * testsuite/gas/aarch64/advsimd-mov-bad.d: Likewise. |
| * testsuite/gas/aarch64/b_1.d: Likewise. |
| * testsuite/gas/aarch64/beq_1.d: Likewise. |
| * testsuite/gas/aarch64/codealign_1.d: Likewise. |
| * testsuite/gas/aarch64/dwarf.d: Likewise. |
| * testsuite/gas/aarch64/ilp32-basic.d: Likewise. |
| * testsuite/gas/aarch64/int-insns.d: Likewise. |
| * testsuite/gas/aarch64/ldr_1.d: Likewise. |
| * testsuite/gas/aarch64/mapping_5.d: Likewise. |
| * testsuite/gas/aarch64/mapping_6.d: Likewise. |
| * testsuite/gas/aarch64/mops_invalid_2.d: Likewise. |
| * testsuite/gas/aarch64/movw_label.d: Likewise. |
| * testsuite/gas/aarch64/pac_ab_key.d: Likewise. |
| * testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise. |
| * testsuite/gas/aarch64/pr27217.d: Likewise. |
| * testsuite/gas/aarch64/pr29519.d: Likewise. |
| * testsuite/gas/aarch64/programmer-friendly.d: Likewise. |
| * testsuite/gas/aarch64/reloc-data.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_g0-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_g0.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_g0_nc-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_g0_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_g1-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_g1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_g1_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_g2.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_hi12-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_hi12.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12-1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12-ilp32-1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12-ldst16.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12-ldst32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12-ldst64.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12-ldst8.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst16.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst64.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst8.d: Likewise. |
| * testsuite/gas/aarch64/reloc-dtprel_lo12_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-gotoff_g0_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-gotoff_g1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-gottprel_g0_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-gottprel_g1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-insn.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g0.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g0_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g1_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g2.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g2_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g3.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsdesc_off_g0_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsdesc_off_g1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsgd_g0_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsgd_g1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsldm-1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsldm-ilp32-1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsldm-page-1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsldm-page-ilp32-1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsldm_lo12_nc-1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tlsldm_lo12_nc-ilp32-1.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12-ldst16-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12-ldst16.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12-ldst32-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12-ldst32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12-ldst64-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12-ldst64.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12-ldst8-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12-ldst8.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst16-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst16.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst32-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst64-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst64.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst8-ilp32.d: Likewise. |
| * testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst8.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_1.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_10.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_11.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_12.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_13.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_14.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_15.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_16.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_17.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_18.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_19.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_2.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_20.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_21.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_22.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_23.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_24.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_25.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_26.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_27.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_28.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_3.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_4.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_5.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_6.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_7.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_8.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_9.d: Likewise. |
| * testsuite/gas/aarch64/symbol-variant_pcs-1.d: Likewise. |
| * testsuite/gas/aarch64/symbol-variant_pcs-2.d: Likewise. |
| * testsuite/gas/aarch64/symbol-variant_pcs-3.d: Likewise. |
| * testsuite/gas/aarch64/system.d: Likewise. |
| * testsuite/gas/aarch64/tail_padding.d: Likewise. |
| * testsuite/gas/aarch64/tbz_1.d: Likewise. |
| * testsuite/gas/aarch64/tls-desc.d: Likewise. |
| * testsuite/gas/aarch64/tls.d: Likewise. |
| |
| 2023-04-27 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/bpf/mem.dump: New file. |
| * testsuite/gas/bpf/mem-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/mem.d: #dump mem.dump. |
| * testsuite/gas/bpf/lddw.dump: New file. |
| * testsuite/gas/bpf/lddw-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/lddw.d: #dump lddw.dump. |
| * testsuite/gas/bpf/jump.dump: New file. |
| * testsuite/gas/bpf/jump-pseudoc.d: Likewise |
| * testsuite/gas/bpf/jump.d: #dump jump.dump. |
| * testsuite/gas/bpf/jump32.dump: New file. |
| * testsuite/gas/bpf/jump32-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/jump32.d: #dump jump32.dump. |
| * testsuite/gas/bpf/lddw-be.dump: New file. |
| * testsuite/gas/bpf/lddw-be-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/lddw-be.d: #dump lddw-be.dump. |
| * testsuite/gas/bpf/indcall-1.dump: New file. |
| * testsuite/gas/bpf/indcall-1-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/indcall-1.d: #dump indcall-1.dump. |
| * testsuite/gas/bpf/indcall-1-pseudoc.s (main): Fix lddw |
| instruction. |
| * testsuite/gas/bpf/atomic.dump: New file. |
| * testsuite/gas/bpf/atomic-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/atomic.d: #dump atomic.dump. |
| * testsuite/gas/bpf/alu32.dump: New file. |
| * testsuite/gas/bpf/alu32-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu32.d: #dump alu32.dump. |
| * testsuite/gas/bpf/alu.dump: New file. |
| * testsuite/gas/bpf/alu-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu.d: #dump alu.dump. |
| |
| * testsuite/gas/bpf/alu-be.dump: New file. |
| * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise. |
| * testsuite/gas/bpf/alu-be.d: #dump alu-be.dump. |
| * testsuite/gas/bpf/alu32-be-pseudoc.d: New file. |
| * testsuite/gas/bpf/alu32-be-dump: Likewise. |
| * testsuite/gas/bpf/alu32-be.d: #dump alu32-be-dump. |
| * testsuite/gas/bpf/bpf.exp: Run *-pseudoc tests. |
| |
| 2023-04-19 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| PR gas/29757 |
| * doc/c-bpf.texi (BPF Pseudo-C Syntax): New section. |
| |
| 2023-04-20 Guillermo E. Martinez <guillermo.e.martinez@oracle.com> |
| |
| PR gas/29728 |
| * testsuite/gas/all/assign-bad-recursive.d: Skip test in bpf-* |
| targets. |
| * testsuite/gas/all/eqv-dot.d: Likewise. |
| * testsuite/gas/all/gas.exp: Skip other assignment tests in bpf-*. |
| * testsuite/gas/bpf/alu-pseudoc.s: New file. |
| * testsuite/gas/bpf/pseudoc-normal.s: Likewise. |
| * testsuite/gas/bpf/pseudoc-normal.d: Likewise. |
| * testsuite/gas/bpf/pseudoc-normal-be.d: Likewise. |
| * testsuite/gas/bpf/mem-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/lddw-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/jump32-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/jump-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/indcall-1-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/atomic-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/alu32-pseudoc.s: Likewise. |
| * testsuite/gas/bpf/*.d: Add -pseudoc variants of the tests. |
| |
| 2023-04-20 Guillermo E. Martinez <guillermo.e.martinez@oracle.com> |
| |
| PR gas/29728 |
| * config/tc-bpf.h (TC_EQUAL_IN_INSN): Define. |
| * config/tc-bpf.c (LEX_IS_SYMBOL_COMPONENT): Define. |
| (LEX_IS_WHITESPACE): Likewise. |
| (LEX_IS_NEWLINE): Likewise. |
| (LEX_IS_ARITHM_OP): Likewise. |
| (LEX_IS_STAR): Likewise. |
| (LEX_IS_CLSE_BR): Likewise. |
| (LEX_IS_OPEN_BR): Likewise. |
| (LEX_IS_EQUAL): Likewise. |
| (LEX_IS_EXCLA): Likewise. |
| (ST_EOI): Likewise. |
| (MAX_TOKEN_SZ): Likewise. |
| (init_pseudoc_lex): New function. |
| (md_begin): Call init_pseudoc_lex. |
| (valid_expr): New function. |
| (build_bpf_non_generic_load): Likewise. |
| (build_bpf_atomic_insn): Likewise. |
| (build_bpf_jmp_insn): Likewise. |
| (build_bpf_arithm_insn): Likewise. |
| (build_bpf_endianness): Likewise. |
| (build_bpf_load_store_insn): Likewise. |
| (look_for_reserved_word): Likewise. |
| (is_register): Likewise. |
| (is_cast): Likewise. |
| (get_token): Likewise. |
| (bpf_pseudoc_to_normal_syntax): Likewise. |
| (md_assemble): Try pseudo-C syntax if an instruction cannot be |
| parsed. |
| |
| 2023-04-18 mengqinggang <mengqinggang@loongson.cn> |
| |
| * config/tc-loongarch.c (loongarch_fix_adjustable): Symbols with |
| GOT relocatios do not fix adjustbale. |
| * testsuite/gas/loongarch/macro_op_large_abs.d: Regenerated. |
| * testsuite/gas/loongarch/macro_op_large_pc.d: Regenerated. |
| |
| 2023-04-18 Thomas Koenig <tkoenig@netcologne.de> |
| |
| * doc/internals.texi (Relaxing with a table): Describe handling of |
| opcodes for relaxation a bit better. |
| |
| 2023-04-13 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/cfi/cfi-arc-1.s: Use baseline instructions. |
| * testsuite/gas/cfi/cfi-arc-1.d: Update matching patterns. |
| |
| 2023-04-13 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/dsp.s: Remove unimplemented dsp instructions. |
| * testsuite/gas/arc/dsp.d: Update the test. |
| |
| 2023-03-14 Nick Clifton <nickc@redhat.com> |
| |
| PR 30206 |
| * doc/as.texi (Pseudo Ops): Document that data directives such as |
| .byte and .int are not intended for encoding instructions. |
| |
| 2023-02-28 Richard Ball <richard.ball@arm.com> |
| |
| * testsuite/gas/aarch64/mec-invalid.d: New test. |
| * testsuite/gas/aarch64/mec-invalid.l: New test. |
| * testsuite/gas/aarch64/mec-invalid.s: New test. |
| * testsuite/gas/aarch64/mec.d: New test. |
| * testsuite/gas/aarch64/mec.s: New test. |
| |
| 2023-02-27 Benson Muite <benson_muite@emailplus.org> |
| |
| PR 28909 |
| * doc/local.mk (asconfig.texi): Use "cp -p" to preserve |
| timestamps. |
| * Makefile.in: Regenerate. |
| |
| 2023-02-01 Nick Clifton <nickc@redhat.com> |
| |
| * dwarf2dbg.c (emit_inc_line_addr): Use unsigned constants when |
| checking addr_delta. |
| |
| 2023-01-20 Frederic Cambus <fred@statdns.com> |
| |
| * configure.tgt (arm-*-openbsd*): Add target. |
| |
| 2023-01-16 Nick Clifton <nickc@redhat.com> |
| |
| * po/ru.po: Updated Russian translation. |
| |
| 2023-01-03 Nick Clifton <nickc@redhat.com> |
| |
| PR 29952 |
| * config/tc-i386.c (md_assemble): Avoid constructing translatable |
| strings. |
| |
| 2023-01-03 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po: Updated French translation. |
| * po/uk.po: Updated Ukrainian translation. |
| |
| 2022-12-31 Nick Clifton <nickc@redhat.com> |
| |
| * 2.40 branch created. |
| |
| 2022-11-21 Nick Clifton <nickc@redhat.com> |
| |
| PR 29764 |
| * testsuite/gas/arm/cpu-cortex-a76ae.d: Add arm prefix to the -m |
| option passed to objdump. |
| * testsuite/gas/arm/cpu-cortex-a77.d: Likewise. |
| * testsuite/gas/aarch64/cpu-cortex-a76ae.d: Add aarch64 prefix to |
| the -m option passed to objdump. |
| * testsuite/gas/aarch64/cpu-cortex-a77.d: Likewise. |
| |
| 2022-10-31 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/gas/rx/mvtacgu.d: Update expected disassembly. |
| |
| 2022-10-11 Nick Clifton <nickc@redhat.com> |
| |
| * symbols.c (S_GET_VALUE): If the unresolved symbol is the fake |
| label provide a more helpful error message to the user. |
| (S_GET_VALUE_WHERE): Like S_GET_VALUE, but includes a file/line |
| number for error reporting purposes. |
| * symbols.h (S_GET_VALUE_WHERE): Prototype. |
| * write.c (fixup_segment): Use S_GET_VALUE_WHERE. |
| |
| 2022-09-28 Nick Clifton <nickc@redhat.com> |
| |
| PR 29623 |
| * as.c (show_usage): Document the --dump-config, |
| --gdwarf-cie-version, --hash-size, --multibyte-handling, |
| and --reduce-memory-overheads options. |
| * config/tc-i386.c (md_show_usage): Document the -O option. |
| * doc/as.texi: Document the --dump-config, --emulation, |
| --hash-size, and --reduce-memory-overheads options. |
| |
| 2022-09-08 Nick Clifton <nickc@redhat.com> |
| |
| PR 29559 |
| * dwarf2dbg.c (out_debug_info): Place DW_TAG_unspecified_type at |
| the end of the list of children, not at the start of the CU |
| information. |
| * testsuite/gas/elf/dwarf-3-func.d: Update expected output. |
| * testsuite/gas/elf/dwarf-5-func-global.d: Likewise. |
| * testsuite/gas/elf/dwarf-5-func-local.d: Likewise. |
| * testsuite/gas/elf/dwarf-5-func.d: Likewise. |
| |
| 2022-08-31 Frederic Cambus <fred@statdns.com> |
| |
| * configure.tgt (aarch64*-*-openbsd*): Add target. |
| |
| 2022-08-30 Nick Clifton <nickc@redhat.com> |
| |
| PR 29494 |
| * testsuite/gas/arm/pr29494.s: New test source file. |
| * testsuite/gas/arm/pr29494.d: New test driver. |
| |
| 2022-08-25 Nick Clifton <nickc@redhat.com> |
| |
| PR 29517 |
| * dwarf2dbg.c (GAS_ABBREV_COMP_UNIT): New defined constant. |
| (GAS_ABBREV_SUBPROG): New defined constant. |
| (GAS_ABBREV_NO_TYPE): New defined constant. |
| (out_debug_abbrev): Use the new defined constants when emitting |
| abbreviation numbers. Generate an abbreviation for an unspecified |
| type. |
| (out_debug_info): Use the new defined constants when referring to |
| abbreviations. Generate a use of the no_type abbreviation. |
| Reference the use when generating DIEs for functions. |
| * testsuite/gas/elf/dwarf-3-func.d: Update to allow for newly |
| extended output from the assembler. |
| * testsuite/gas/elf/dwarf-5-func-global.d: Likewise. |
| * testsuite/gas/elf/dwarf-5-func-local.d: Likewise. |
| * testsuite/gas/elf/dwarf-5-func.d: Likewise. |
| |
| 2022-08-25 Nick Clifton <nickc@redhat.com> |
| |
| PR 29519 |
| * config/tc-aarch64.c (s_unreq): Use find_end_of_line(). |
| (s_aarch64_cpu): Likewise. |
| (s_aarch64_arch): Likewise. |
| (s_aarch64_arch_extension): Likewise. |
| * testsuite/gas/aarch64/pr29519.d: New test driver file. |
| * testsuite/gas/aarch64/pr29519.s: New test source file. |
| |
| 2022-08-08 Tsukasa OI <research_trasio@irq.a4lg.com> |
| |
| * config/obj-macho.c (obj_mach_o_get_section_names): Wrap two |
| string literals within with gettext macro. |
| |
| 2022-08-05 Nick Clifton <nickc@redhat.com> |
| |
| PR 29447 |
| * read.c (read_symbol_name): Pass 0 as the length parameter when |
| invoking mbstowc in order to check the validity of a wide string. |
| |
| 2022-07-18 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * config/tc-arc.c (md_assembly): Update strspn string with the |
| missing ciphers. |
| |
| 2022-07-08 Nick Clifton <nickc@redhat.com> |
| |
| * 2.39 branch created. |
| |
| 2022-05-18 Victor Do Nascimento <victor.donascimento@arm.com> |
| |
| * config/tc-arm.c (parse_reg_list): Add handling of mixed register |
| types. |
| (reg_names): Enumerate pseudoregister according to mapped physical |
| register number. |
| (s_arm_unwind_save_pseudo): Modify function signature. |
| (s_arm_unwind_save_core): Likewise. |
| (s_arm_unwind_save_mixed): New function. |
| (s_arm_unwind_save): Generate register list mask to pass to nested |
| functions. |
| * testsuite/gas/arm/unwind-pacbti-m.s: Expand test for mixed |
| register type lists. |
| * testsuite/gas/arm/unwind-pacbti-m.d: Likewise. |
| * testsuite/gas/arm/unwind-pacbti-m-readelf.d: Likewise. |
| |
| 2022-04-07 Mark Harmstone <mark@harmstone.com> |
| |
| * config/tc-i386.c (pe_directive_secidx): New function. |
| (md_pseudo_table): Add support for secidx. |
| (x86_cons_fix_new): Likewise. |
| (tc_gen_reloc): Likewise. |
| * expr.c (op_rank): Add O_secidx. |
| * expr.h (operatorT): Likewise. |
| * symbols.c (resolve_symbol_value): Add support for O_secidx. |
| * testsuite/gas/i386/secidx.s: New test source file. |
| * testsuite/gas/i386/secidx.d: New test driver file. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2022-04-07 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * config/tc-s390.c (s390_parse_cpu): Add z16 as alternate CPU |
| name. |
| * doc/as.texi: Add z16 and arch14 to CPU string list. |
| * doc/c-s390.texi: Add z16 to CPU string list. |
| |
| 2022-04-06 Nick Clifton <nickc@redhat.com> |
| |
| PR 28981 |
| * testsuite/gas/elf/dwarf-5-irp.d: Update expected output. |
| |
| 2022-03-21 Nick Clifton <nickc@redhat.com> |
| |
| PR 28791 |
| * config/tc-z80.c (emit_data_val): Do not warn about overlarge |
| constants generated by bit manipulation operators. |
| * testsuite/gas/z80/pr28791.s: New test source file. |
| * testsuite/gas/z80/pr28791.d: New test driver file. |
| |
| 2022-01-28 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po: Updated French translation. |
| |
| 2022-01-24 Nick Clifton <nickc@redhat.com> |
| |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2022-01-22 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/gas.pot: Regenerate. |
| |
| 2022-01-22 Nick Clifton <nickc@redhat.com> |
| |
| * 2.38 release branch created. |
| |
| 2022-01-17 Nick Clifton <nickc@redhat.com> |
| |
| * Makefile.in: Regenerate. |
| * po/gas.pot: Regenerate. |
| |
| 2022-01-17 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| PR 28762 |
| * app.c (do_scrub_chars): Correct handling when the symbol is not 'af'. |
| |
| 2021-12-16 Nick Clifton <nickc@redhat.com> |
| |
| PR 28686 |
| * config/tc-avr.h (tc_fix_adjustable): Define. |
| * config/tc-avr.c (avr_fix_adjustable): New function. |
| * testsuite/gas/all/gas.exp: Skip tests that need adjustable fixups. |
| * testsuite/gas/elf/elf.exp: Likewise. |
| * testsuite/gas/avr/diffreloc_withrelax.d: Adjust expected output. |
| * testsuite/gas/avr/pc-relative-reloc.d: Adjust expected output. |
| |
| 2021-11-26 Tom de Vries <tdevries@suse.de> |
| |
| PR 28629 |
| * dwarf2dbg.c (out_dir_and_file_list): When copying file 1 to file 0, |
| also copy dir and md5 fields. |
| * testsuite/gas/i386/dwarf5-line-4.d: Adjust expected output. |
| |
| 2021-11-18 Nick Clifton <nickc@redhat.com> |
| |
| * as.c (parse_args): Add support for --multibyte-handling. |
| * as.h (multibyte_handling): Declare. |
| * app.c (scan_for_multibyte_characters): New function. |
| (do_scrub_chars): Call the new function if multibyte warning is |
| enabled. |
| * input-scrub,c (input_scrub_next_buffer): Call the multibyte |
| scanning function if multibyte warnings are enabled. |
| * symbols.c (struct symbol_flags): Add multibyte_warned bit. |
| (symbol_init): Call the multibyte scanning function if multibyte |
| symbol warnings are enabled. |
| (S_SET_SEGMENT): Likewise. |
| * NEWS: Mention the new feature. |
| * doc/as.texi: Document the new feature. |
| * testsuite/gas/all/multibyte.s: New test source file. |
| * testsuite/gas/all/multibyte1.d: New test driver file. |
| * testsuite/gas/all/multibyte1.l: New test expected output. |
| * testsuite/gas/all/multibyte2.d: New test driver file. |
| * testsuite/gas/all/multibyte2.l: New test expected output. |
| * testsuite/gas/all/gas.exp: Run the new tests. |
| |
| 2021-11-15 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * doc/as.texi (File): Update description of .file 0 directive. |
| * dwarf2dbg.c (get_directory_table_entry): Remove obsolete comment |
| and pass file0_dirname in recursive call. |
| (allocate_filename_to_slot): Deal with a full path in the file name |
| if the index number is 0. |
| * testsuite/gas/elf/dwarf-5-file0.d: Fix pasto. |
| * testsuite/gas/elf/dwarf-5-file0-2.d: Likewise. |
| * testsuite/gas/elf/dwarf-5-file0-3.d: New file. |
| * testsuite/gas/elf/dwarf-5-file0-3.s: Likewise. |
| * testsuite/gas/elf/elf.exp: Run dwarf-5-file0-3. |
| |
| 2021-10-28 Markus Klein <markus.klein@sma.de> |
| |
| PR 28436 |
| * config/tc-arm.c (do_vfp_nsyn_push_pop_check): New function. |
| (do_vfp_nsyn_pop): Use the new function. |
| (do_vfp_nsyn_push): Use the new function. |
| * testsuite/gas/arm/v8_1m-mve.s: Add new instructions. |
| * testsuite/gas/arm/v8_1m-mve.d: Updated expected disassembly. |
| |
| 2021-09-27 Nick Alcock <nick.alcock@oracle.com> |
| |
| * configure: Regenerate. |
| |
| 2021-09-25 Peter Bergner <bergner@linux.ibm.com> |
| |
| * testsuite/gas/ppc/power5.s: New test. |
| * testsuite/gas/ppc/power5.d: Likewise. |
| * testsuite/gas/ppc/ppc.exp: Run it. |
| * testsuite/gas/ppc/power7.s: Remove tests for mfppr, mfppr32, mtppr |
| and mtppr32. |
| * testsuite/gas/ppc/power7.d: Likewise. |
| |
| 2021-09-13 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-ia64.c (cross_section): Use obj_elf_section_name to |
| parse the section name. |
| * config/tc-mips.c (s_change_section): Likewise. |
| |
| 2021-09-02 Nick Clifton <nickc@redhat.com> |
| |
| PR 28292 |
| * config/tc-v850.c (handle_lo16): Also accept |
| BFD_RELOC_V850_LO16_SPLIT_OFFSET. |
| * testsuite/gas/v850/split-lo16.s: Add extra line. |
| * testsuite/gas/v850/split-lo16.d: Update expected disassembly. |
| |
| 2021-08-11 Darius Galis <darius.galis@cyberthorstudios.com> |
| |
| * config/rx-parse.y (DECNT): Fixed typo. |
| * testsuite/gas/rx/dpopm.sm (DECNT): Fixed typo. |
| * testsuite/gas/rx/dpushm.sm (DECNT): Fixed typo. |
| * testsuite/gas/rx/macros.inc (DECNT): Fixed typo. |
| |
| 2021-08-11 Nick Clifton <nickc@redhat.com> |
| |
| PR 28215 |
| * config/tc-csky.c (md_apply_fix): Correctly handle a fixup that |
| involves an overlarge constant. |
| |
| 2021-08-11 Matt Jacobson <mhjacobson@me.com> |
| |
| * config/tc-avr.c (enum options): Add option flag. |
| (struct option): Add option -mno-dollar-line-separator. |
| (md_parse_option): Adjust treatment of $ when option is present. |
| (usage): Mention the new option. |
| * config/tc-avr.h: Use avr_line_separator_chars. |
| * doc/c-avr.texi: Document the new option. |
| |
| 2021-08-11 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-tic4x.c (tic4x_gen_to_words): Fix typo. |
| |
| 2021-08-10 Nick Clifton <nickc@redhat.com> |
| |
| * po/ru.po: Updated Russian translation. |
| |
| 2021-08-09 Nick Clifton <nickc@redhat.com> |
| |
| * dwarf2dbg.c (get_directory_table_entry): Ensure that dir[0] |
| contains current working directory. |
| (out_dir_and_file_list): Likewise. |
| * testsuite/gas/elf/dwarf-5-dir0.s: New test source file. |
| * testsuite/gas/elf/dwarf-5-dir0.d: New test driver. |
| * testsuite/gas/elf/elf.exp: Run the new test. |
| * testsuite/gas/elf/dwarf-5-file0.d: Adjust expected output. |
| * testsuite/gas/i386/dwarf5-line-1.d: Likewise. |
| * testsuite/gas/i386/dwarf5-line-2.d: Likewise. |
| |
| 2021-07-14 Alan Modra <amodra@gmail.com> |
| |
| * write.c (TC_VALIDATE_FIX_SUB): Default to 0. |
| * config/tc-hppa.h (TC_VALIDATE_FIX_SUB): Define. |
| * config/tc-microblaze.h (TC_VALIDATE_FIX_SUB): Define. |
| * config/tc-alpha.h (TC_VALIDATE_FIX_SUB): Define for ECOFF. |
| * config/tc-ppc.h (TC_VALIDATE_FIX_SUB): Don't define for ELF. |
| Do define for XCOFF. |
| |
| 2021-07-14 Clément Chigot <clement.chigot@atos.net> |
| |
| * config/tc-ppc.c (ppc_change_debug_section): Update to |
| match new name's field. |
| |
| 2021-07-12 Tucker <tuckkern@sourceware@gmail.com> |
| |
| PR 28054 |
| * config/obj-elf.c (obj_elf_change_section): Set the |
| SEF_ELF_OCTETS flag on debug sections. |
| |
| 2021-06-07 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * testsuite/gas/s390/zarch-arch14.d: Add qpaci. |
| * testsuite/gas/s390/zarch-arch14.s: Add qpaci. |
| |
| 2021-07-07 Nick Clifton <nickc@redhat.com> |
| |
| PR 28051 |
| * config/tc-i386.c (offset_in_range): Reformat error messages in |
| order to fix problems when translating. |
| (md_assemble): Likewise. |
| * messages.c (as_internal_value_out_of_range): Likewise. |
| * read.c (emit_expr_with_reloc): Likewise. |
| * testsuite/gas/all/overflow.l Change expected output format. |
| * po/gas.pot: Regenerate. |
| |
| 2021-07-03 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/gas.pot: Regenerate. |
| |
| 2021-07-03 Nick Clifton <nickc@redhat.com> |
| |
| * 2.37 release branch created. |
| |
| 2021-07-02 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-nds32.c (nds32_keyword_gpr): Don't declare. |
| (md_begin): Constify k. |
| |
| 2021-07-02 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-nds32.c: Change all references of keyword_gpr to |
| nds32_keyword_gpr. |
| |
| 2021-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/tc-microblaze.c (md_begin): Make opcode const. Rename |
| opcodes to microblaze_opcodes. |
| |
| 2021-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/tc-aarch64.c (struct templates): Make opcode const. |
| (md_assemble): Likewise. |
| (fill_instruction_hash_table): Likewise. |
| |
| 2021-06-24 Clément Chigot <clement.chigot@atos.net> |
| |
| * config/tc-ppc.c (md_assemble): Update ppc_current_csect |
| alignment when finding prefixed instructions. |
| |
| 2021-06-22 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-pj.c (md_apply_fix): Apply PJ_CODE_REL32 relocs. |
| * testsuite/gas/pj/ops.s: Update jsr, ret, getstatic, |
| putstatic, getfield, putfield, invokevirtual, invokespecial, |
| invokestatic, invokeinterface, goto_w, jsr_w assembly. Delete |
| version 1 picojava opcodes. |
| * testsuite/gas/pj/ops.d: Match expected output. |
| |
| 2021-06-19 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-z80.c (signed_overflow, unsigned_overflow): Avoid UB. |
| |
| 2021-06-19 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/ppc/raw.s: Use 0 as pli constant. |
| * testsuite/gas/ppc/raw.d: Update to suit. |
| |
| 2021-06-18 Jan Beulich <jbeulich@suse.com> |
| |
| * expr.c (symbol_lookup_or_make): New. |
| (operand): Use it. |
| * testsuite/gas/elf/startof.s, testsuite/gas/elf/startof.d: New. |
| * testsuite/gas/elf/elf.exp: Run new test. |
| |
| 2021-06-17 Nick Clifton <nickc@redhat.com> |
| |
| PR 27904 |
| * config/tc-aarch64.c (ldst_lo12_determine_real_reloc_type): |
| Generate a syntax error message if the reloc qualifier does not |
| match the instruction's size. |
| |
| 2021-06-17 Clément Chigot <clement.chigot@atos.net> |
| |
| * config/tc-ppc.c (md_begin): Create bss section with dummy |
| symbol. |
| (ppc_frob_symbol): Output XTY_CM for bss csects. |
| (ppc_fix_adjustable): Adjust condition to avoid bss csects. |
| |
| 2021-06-17 Clément Chigot <clement.chigot@atos.net> |
| |
| * config/tc-ppc.c (md_apply_fix): Adjust addend to nullify |
| section contents for BFD_RELOC_PPC_TLSM or |
| BFD_RELOC_PPC64_TLSM. |
| * testsuite/gas/ppc/xcoff-tlsm-32.d: New test. |
| * testsuite/gas/ppc/xcoff-tlsm-64.d: New test. |
| * testsuite/gas/ppc/xcoff-tlsm.s: New test. |
| * testsuite/gas/ppc/aix.exp: Run new tests. |
| |
| 2021-06-16 Jan Beulich <jbeulich@suse.com> |
| |
| * read.c (parse_one_float): New. |
| (s_float_space, float_cons): Use it. |
| * testsuite/gas/all/float.s: Add .dc.*, .dcb.*, and .ds.* cases. |
| |
| 2021-06-16 Jan Beulich <jbeulich@suse.com> |
| |
| * read.c (emit_expr_with_reloc): Adjust overflow check. Drop |
| hibit local variable. |
| * write.c (fixup_segment): Differentiate signed and non-signed |
| relocs in overflow check. |
| * testsuite/gas/all/overflow.s, |
| testsuite/gas/all/overflow.l: New. |
| * testsuite/gas/all/gas.exp: Run new test. |
| |
| 2021-06-15 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (md_show_usage): Split ELF and PE/COFF parts |
| of object format controlling option. Add Mach-O to the latter. |
| * testsuite/gas/i386/i386.exp (gas_bfd64_check): Adjust |
| accordingly. |
| |
| 2021-06-15 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (disp16, disp32, disp32s): Delete. |
| (optimize_disp, i386_finalize_displacement): Use |
| operand_type_and_not. |
| (build_modrm_byte): Likewise. Eliminate local variable newdisp. |
| |
| 2021-06-15 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (offset_in_range): Bail early when mask would |
| cover all bits anyway. |
| |
| 2021-06-15 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_disp): Generalize disp32 part of |
| the BFD64-only logic to also apply to non-64-bit code. |
| (i386_finalize_displacement): Use extend_to_32bit_address for |
| non-64-bit code. Drop now redundant O_constant checks. |
| * testsuite/gas/i386/disp-imm-32.s, |
| testsuite/gas/i386/disp-imm-32.d: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2021-06-15 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (offset_in_range): Replace uses of |
| bfd_sprintf_vma. |
| |
| 2021-06-15 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (offset_in_range): Adjust conditional. |
| * testsuite/gas/i386/disp-imm-16.s, |
| testsuite/gas/i386/disp-imm-16.l, |
| testsuite/gas/i386/disp-imm-64.s, |
| testsuite/gas/i386/disp-imm-64.l: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2021-06-15 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (i386_att_operand): Re-introduce (now |
| properly named) parens_not_balanced. |
| * testsuite/gas/i386/sib.s: Add more cases. |
| * testsuite/gas/i386/sib.d, testsuite/gas/i386/sib-intel.d: |
| Adjust expectations. |
| |
| 2021-06-14 Jan Beulich <jbeulich@suse.com> |
| |
| * read.c (emit_expr_with_reloc): Fold three as_warn(). |
| |
| 2021-06-14 Jan Beulich <jbeulich@suse.com> |
| |
| * doc/internals.texi (TC_ADDRESS_BYTES): Mention generic default. |
| * read.c (potable, cons_worker): Drop TC_ADDRESS_BYTES |
| conditional. |
| |
| 2021-06-11 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (x86_cons): Handle GOT/PLT relocations only |
| if needed. |
| * config/tc-i386.h (TC_PARSE_CONS_EXPRESSION): Always define. |
| |
| 2021-06-11 Nelson Chu <nelson.chu@sifive.com> |
| |
| * config/tc-riscv.c (riscv_set_arch): Call riscv_set_rvc |
| and riscv_set_rve both for -march and elf attributes. |
| (riscv_after_parse_args): Likewise. |
| |
| 2021-06-10 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-arm.c (do_bfloat_vfma): Rename index to idx. |
| (do_vusdot): Likewise. |
| (do_vsudot): Likewise. |
| (check_cde_operand): Likewise. |
| (do_vdot): Likewise. |
| |
| 2021-06-10 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-arm.c (reg_expected_msgs): Add REG_TYPE_ZR entry. |
| |
| 2021-06-10 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_encoding): Suppress LEA conversion |
| when it would grow code size in 16-bit mode. |
| * testsuite/gas/i386/lea16-optimize.d: Adjust expectations. |
| * testsuite/gas/i386/lea16-optimize2.d: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2021-06-08 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/quoted.d, testsuite/gas/i386/wrap32-text.d: |
| Adjust expectations. |
| * testsuite/gas/i386/wrap32-data.d: Likewise. Correct name. |
| |
| 2021-06-08 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_imm): Use fits_in_unsigned_word |
| and fits_in_unsigned_long. |
| |
| 2021-06-08 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_disp): Use fits_in_unsigned_word |
| and fits_in_unsigned_long. Combine if()s. |
| |
| 2021-06-08 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_disp): Write back updated value. |
| * testsuite/gas/i386/lea16.s, testsuite/gas/i386/lea64.s: New |
| cases. |
| * testsuite/gas/i386/lea16-optimize.d, |
| testsuite/gas/i386/lea64.d, testsuite/gas/i386/lea64-optimize.d: |
| Adjust expectations. |
| * testsuite/gas/i386/lea16.d: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2021-06-08 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_disp): Drop redundant masking. |
| Re-order. |
| |
| 2021-06-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (i386_att_operand): Re-write handling of |
| vector operations operand suffix. |
| * testsuite/gas/i386/unary.s: Add more cases. |
| * testsuite/gas/i386/unary.d: Adjust expectations. |
| |
| 2021-06-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (parse_operands): Reduce scope of |
| paren_not_balanced, to match the new in_quotes. Skip over quoted |
| regions of operands. |
| (i386_att_operand): Remove (mis-named) parens_balanced. Respect |
| double quote. |
| * testsuite/gas/i386/unary.s: Add more cases. |
| * testsuite/gas/i386/unary.d: Adjust expectations. |
| |
| 2021-06-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (digit_chars, is_digit_char): Delete. |
| (md_begin): Fold digit and lower-case letter handling. |
| (starts_memory_operand): Permit more characters. |
| * testsuite/gas/i386/unary.s, testsuite/gas/i386/unary.d: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2021-06-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (starts_memory_operand): New. |
| (i386_att_operand): Use it. |
| * testsuite/gas/i386/quoted.s, testsuite/gas/i386/quoted.d: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2021-06-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (i386_att_operand): Flip checking for '*' and |
| start-of-expression. Don't permit '*' when one was already seen. |
| |
| 2021-06-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (parse_operands): Don't check for matched |
| square brackets. |
| |
| 2021-06-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (check_VecOperations): Remove 2nd parameter. |
| (i386_att_operand): Adjust calls to check_VecOperations. |
| * config/tc-i386-intel.c (i386_intel_operand): Likewise. |
| |
| 2021-06-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (i386_immediate): Don't call check_VecOperations. |
| |
| 2021-06-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (extend_to_32bit_address): New. |
| (x86_cons, i386_finalize_immediate, md_apply_fix): Use it. |
| (signed_cons): Use object_64bit. |
| * testsuite/gas/i386/wrap32.s, testsuite/gas/i386/wrap32-data.d, |
| testsuite/gas/i386/wrap32-text.d: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2021-06-03 Alan Modra <amodra@gmail.com> |
| |
| PR 1202 |
| * testsuite/gas/mcore/allinsn.d: Correct loopt expected output. |
| |
| 2021-05-29 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/ppc/raw.s, |
| * testsuite/gas/ppc/raw.d: New test. |
| * testsuite/gas/ppc/ppc.exp: Run it. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/c0.d: New test. |
| * testsuite/gas/mips/mips1@c0.d: New test. |
| * testsuite/gas/mips/mips2@c0.d: New test. |
| * testsuite/gas/mips/mips3@c0.d: New test. |
| * testsuite/gas/mips/mips4@c0.d: New test. |
| * testsuite/gas/mips/mips5@c0.d: New test. |
| * testsuite/gas/mips/mips32@c0.d: New test. |
| * testsuite/gas/mips/mips64@c0.d: New test. |
| * testsuite/gas/mips/r3000@c0.d: New test. |
| * testsuite/gas/mips/r3900@c0.d: New test. |
| * testsuite/gas/mips/r4000@c0.d: New test. |
| * testsuite/gas/mips/vr5400@c0.d: New test. |
| * testsuite/gas/mips/r5900@c0.d: New test. |
| * testsuite/gas/mips/sb1@c0.d: New test. |
| * testsuite/gas/mips/interaptiv-mr2@c0.d: New test. |
| * testsuite/gas/mips/octeon@c0.d: New test. |
| * testsuite/gas/mips/xlr@c0.d: New test. |
| * testsuite/gas/mips/c1.d: New test. |
| * testsuite/gas/mips/mips1@c1.d: New test. |
| * testsuite/gas/mips/mips2@c1.d: New test. |
| * testsuite/gas/mips/mips3@c1.d: New test. |
| * testsuite/gas/mips/mips4@c1.d: New test. |
| * testsuite/gas/mips/mips5@c1.d: New test. |
| * testsuite/gas/mips/mips32@c1.d: New test. |
| * testsuite/gas/mips/mips64@c1.d: New test. |
| * testsuite/gas/mips/mipsr6@c1.d: New test. |
| * testsuite/gas/mips/r3000@c1.d: New test. |
| * testsuite/gas/mips/r3900@c1.d: New test. |
| * testsuite/gas/mips/r4000@c1.d: New test. |
| * testsuite/gas/mips/vr5400@c1.d: New test. |
| * testsuite/gas/mips/r5900@c1.d: New test. |
| * testsuite/gas/mips/sb1@c1.d: New test. |
| * testsuite/gas/mips/interaptiv-mr2@c1.d: New test. |
| * testsuite/gas/mips/octeon@c1.d: New test. |
| * testsuite/gas/mips/xlr@c1.d: New test. |
| * testsuite/gas/mips/c2.d: New test. |
| * testsuite/gas/mips/vr5400@c2.d: New test. |
| * testsuite/gas/mips/r5900@c2.d: New test. |
| * testsuite/gas/mips/octeon@c2.d: New test. |
| * testsuite/gas/mips/c3.d: New test. |
| * testsuite/gas/mips/mips1@c3.d: New test. |
| * testsuite/gas/mips/mips2@c3.d: New test. |
| * testsuite/gas/mips/mips32@c3.d: New test. |
| * testsuite/gas/mips/r3000@c3.d: New test. |
| * testsuite/gas/mips/r3900@c3.d: New test. |
| * testsuite/gas/mips/c0.l: New test stderr output. |
| * testsuite/gas/mips/c2.l: New test stderr output. |
| * testsuite/gas/mips/c3.l: New test stderr output. |
| * testsuite/gas/mips/c0.s: New test source. |
| * testsuite/gas/mips/c1.s: New test source. |
| * testsuite/gas/mips/c2.s: New test source. |
| * testsuite/gas/mips/c3.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/mips.exp: Run RFE test across all ISAs. |
| * testsuite/gas/mips/rfe.d: Update for ISA exclusions. |
| * testsuite/gas/mips/mips1@rfe.d: New test. |
| * testsuite/gas/mips/mips2@rfe.d: New test. |
| * testsuite/gas/mips/r3000@rfe.d: New test. |
| * testsuite/gas/mips/r3900@rfe.d: New test. |
| * testsuite/gas/mips/rfe.l: New test stderr output. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/mips.exp: Run coprocessor tests across all |
| ISAs. |
| * testsuite/gas/mips/cp0b.d: Update for ISA exclusions. |
| * testsuite/gas/mips/cp0bl.d: Update for ISA exclusions. |
| * testsuite/gas/mips/cp0c.d: Update for ISA exclusions. |
| * testsuite/gas/mips/cp0m.d: Update for ISA exclusions. |
| * testsuite/gas/mips/cp3.d: Update for ISA exclusions. |
| * testsuite/gas/mips/cp3b.d: Update for ISA exclusions. |
| * testsuite/gas/mips/cp3bl.d: Update for ISA exclusions. |
| * testsuite/gas/mips/cp3m.d: Update for ISA exclusions. |
| * testsuite/gas/mips/cp3d.d: Update for ISA exclusions. |
| * testsuite/gas/mips/mips1@cp0b.d: New test. |
| * testsuite/gas/mips/mips2@cp0b.d: New test. |
| * testsuite/gas/mips/mips3@cp0b.d: New test. |
| * testsuite/gas/mips/r3000@cp0b.d: New test. |
| * testsuite/gas/mips/r3900@cp0b.d: New test. |
| * testsuite/gas/mips/r4000@cp0b.d: New test. |
| * testsuite/gas/mips/r5900@cp0b.d: New test. |
| * testsuite/gas/mips/mips2@cp0bl.d: New test. |
| * testsuite/gas/mips/mips3@cp0bl.d: New test. |
| * testsuite/gas/mips/r3900@cp0bl.d: New test. |
| * testsuite/gas/mips/r4000@cp0bl.d: New test. |
| * testsuite/gas/mips/r5900@cp0bl.d: New test. |
| * testsuite/gas/mips/mips1@cp0c.d: New test. |
| * testsuite/gas/mips/mips2@cp0c.d: New test. |
| * testsuite/gas/mips/mips3@cp0c.d: New test. |
| * testsuite/gas/mips/mips4@cp0c.d: New test. |
| * testsuite/gas/mips/mips5@cp0c.d: New test. |
| * testsuite/gas/mips/r3000@cp0c.d: New test. |
| * testsuite/gas/mips/r3900@cp0c.d: New test. |
| * testsuite/gas/mips/r4000@cp0c.d: New test. |
| * testsuite/gas/mips/vr5400@cp0c.d: New test. |
| * testsuite/gas/mips/r5900@cp0c.d: New test. |
| * testsuite/gas/mips/mips1@cp0m.d: New test. |
| * testsuite/gas/mips/r3000@cp0m.d: New test. |
| * testsuite/gas/mips/octeon@cp2.d: New test. |
| * testsuite/gas/mips/mipsr6@cp2b.d: New test. |
| * testsuite/gas/mips/vr5400@cp2b.d: New test. |
| * testsuite/gas/mips/octeon@cp2b.d: New test. |
| * testsuite/gas/mips/mips1@cp2bl.d: New test. |
| * testsuite/gas/mips/mipsr6@cp2bl.d: New test. |
| * testsuite/gas/mips/r3000@cp2bl.d: New test. |
| * testsuite/gas/mips/vr5400@cp2bl.d: New test. |
| * testsuite/gas/mips/octeon@cp2bl.d: New test. |
| * testsuite/gas/mips/vr5400@cp2m.d: New test. |
| * testsuite/gas/mips/r5900@cp2m.d: New test. |
| * testsuite/gas/mips/octeon@cp2m.d: New test. |
| * testsuite/gas/mips/mips1@cp2d.d: New test. |
| * testsuite/gas/mips/r3000@cp2d.d: New test. |
| * testsuite/gas/mips/r3900@cp2d.d: New test. |
| * testsuite/gas/mips/vr5400@cp2d.d: New test. |
| * testsuite/gas/mips/r5900@cp2d.d: New test. |
| * testsuite/gas/mips/octeon@cp2d.d: New test. |
| * testsuite/gas/mips/mips1@cp2-64.d: New test. |
| * testsuite/gas/mips/mips2@cp2-64.d: New test. |
| * testsuite/gas/mips/mips32@cp2-64.d: New test. |
| * testsuite/gas/mips/mips32r2@cp2-64.d: New test. |
| * testsuite/gas/mips/mips32r3@cp2-64.d: New test. |
| * testsuite/gas/mips/mips32r5@cp2-64.d: New test. |
| * testsuite/gas/mips/mips32r6@cp2-64.d: New test. |
| * testsuite/gas/mips/r3000@cp2-64.d: New test. |
| * testsuite/gas/mips/r3900@cp2-64.d: New test. |
| * testsuite/gas/mips/interaptiv-mr2@cp2-64.d: New test. |
| * testsuite/gas/mips/mips1@cp3.d: New test. |
| * testsuite/gas/mips/mips2@cp3.d: New test. |
| * testsuite/gas/mips/mips32@cp3.d: New test. |
| * testsuite/gas/mips/r3000@cp3.d: New test. |
| * testsuite/gas/mips/r3900@cp3.d: New test. |
| * testsuite/gas/mips/mips1@cp3b.d: New test. |
| * testsuite/gas/mips/mips2@cp3b.d: New test. |
| * testsuite/gas/mips/mips32@cp3b.d: New test. |
| * testsuite/gas/mips/r3000@cp3b.d: New test. |
| * testsuite/gas/mips/r3900@cp3b.d: New test. |
| * testsuite/gas/mips/mips2@cp3bl.d: New test. |
| * testsuite/gas/mips/mips32@cp3bl.d: New test. |
| * testsuite/gas/mips/r3900@cp3bl.d: New test. |
| * testsuite/gas/mips/mips1@cp3m.d: New test. |
| * testsuite/gas/mips/mips2@cp3m.d: New test. |
| * testsuite/gas/mips/r3000@cp3m.d: New test. |
| * testsuite/gas/mips/r3900@cp3m.d: New test. |
| * testsuite/gas/mips/mips2@cp3d.d: New test. |
| * testsuite/gas/mips/cp0b.l: New test stderr output. |
| * testsuite/gas/mips/cp0bl.l: New test stderr output. |
| * testsuite/gas/mips/cp0c.l: New test stderr output. |
| * testsuite/gas/mips/cp0m.l: New test stderr output. |
| * testsuite/gas/mips/cp2.l: New test stderr output. |
| * testsuite/gas/mips/cp2-64.l: New test stderr output. |
| * testsuite/gas/mips/cp2b.l: New test stderr output. |
| * testsuite/gas/mips/cp2bl.l: New test stderr output. |
| * testsuite/gas/mips/cp2m.l: New test stderr output. |
| * testsuite/gas/mips/cp2d.l: New test stderr output. |
| * testsuite/gas/mips/cp3.l: New test stderr output. |
| * testsuite/gas/mips/cp3b.l: New test stderr output. |
| * testsuite/gas/mips/cp3bl.l: New test stderr output. |
| * testsuite/gas/mips/cp3m.l: New test stderr output. |
| * testsuite/gas/mips/cp3d.l: New test stderr output. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/mips32@isa-override-1.d: Update for LDC3 |
| instruction removal. |
| * testsuite/gas/mips/mips32r2@isa-override-1.d: Likewise. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/cp0b.d: New test. |
| * testsuite/gas/mips/cp0bl.d: New test. |
| * testsuite/gas/mips/cp2b.d: New test. |
| * testsuite/gas/mips/micromips@cp2b.d: New test. |
| * testsuite/gas/mips/cp2bl.d: New test. |
| * testsuite/gas/mips/micromips@cp2bl.d: New test. |
| * testsuite/gas/mips/cp3b.d: New test. |
| * testsuite/gas/mips/cp3bl.d: New test. |
| * testsuite/gas/mips/cp0b.s: New test source. |
| * testsuite/gas/mips/cp0bl.s: New test source. |
| * testsuite/gas/mips/cp2b.s: New test source. |
| * testsuite/gas/mips/cp2bl.s: New test source. |
| * testsuite/gas/mips/cp3b.s: New test source. |
| * testsuite/gas/mips/cp3bl.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/rfe.d: New test. |
| * testsuite/gas/mips/rfe.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/cp1-names-r3900.d: New test. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| * testsuite/gas/mips/branch-misc-3.d: Update disassembly |
| according to changes to opcodes. |
| * testsuite/gas/mips/cp1-names-r3000.d: Likewise. |
| * testsuite/gas/mips/cp1-names-r4000.d: Likewise. |
| * testsuite/gas/mips/relax-swap1-mips1.d: Likewise. |
| * testsuite/gas/mips/relax-swap1-mips2.d: Likewise. |
| * testsuite/gas/mips/trunc.d: Likewise. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/cp0c.d: New test. |
| * testsuite/gas/mips/cp0m.d: New test. |
| * testsuite/gas/mips/r3900@cp0m.d: New test. |
| * testsuite/gas/mips/cp2.d: New test. |
| * testsuite/gas/mips/micromips@cp2.d: New test. |
| * testsuite/gas/mips/cp2m.d: New test. |
| * testsuite/gas/mips/mipsr6@cp2m.d: New test. |
| * testsuite/gas/mips/micromips@cp2m.d: New test. |
| * testsuite/gas/mips/cp2d.d: New test. |
| * testsuite/gas/mips/mipsr6@cp2d.d: New test. |
| * testsuite/gas/mips/micromips@cp2d.d: New test. |
| * testsuite/gas/mips/cp2-64.d: New test. |
| * testsuite/gas/mips/micromips@cp2-64.d: New test. |
| * testsuite/gas/mips/cp3.d: New test. |
| * testsuite/gas/mips/cp3m.d: New test. |
| * testsuite/gas/mips/cp3d.d: New test. |
| * testsuite/gas/mips/cp0c.s: New test source. |
| * testsuite/gas/mips/cp0m.s: New test source. |
| * testsuite/gas/mips/cp2.s: New test source. |
| * testsuite/gas/mips/cp2m.s: New test source. |
| * testsuite/gas/mips/cp2d.s: New test source. |
| * testsuite/gas/mips/cp2-64.s: New test source. |
| * testsuite/gas/mips/cp3.s: New test source. |
| * testsuite/gas/mips/cp3m.s: New test source. |
| * testsuite/gas/mips/cp3d.s: New test source. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * tc-mips.c (convert_reg_type) <OP_REG_CONTROL>: New case. |
| (macro) <M_TRUNCWS, M_TRUNCWD>: Use the `g' rather than `G' |
| operand code. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/cp0-names-r3900.d: New test. |
| * testsuite/gas/mips/mips.exp: Run it. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * testsuite/gas/mips/micromips.d: Update disassembly according |
| to "dmtc1" entry fix with opcodes. |
| * testsuite/gas/mips/micromips-compact.d: Likewise. |
| * testsuite/gas/mips/micromips-insn32.d: Likewise. |
| * testsuite/gas/mips/micromips-noinsn32.d: Likewise. |
| * testsuite/gas/mips/micromips-trap.d: Likewise. |
| * testsuite/gas/mips/micromips@isa-override-1.d: Likewise. |
| |
| 2021-05-29 Maciej W. Rozycki <macro@orcam.me.uk> |
| |
| * config/tc-mips.c (FCSR): New macro. |
| (macro) <M_TRUNCWS, M_TRUNCWD>: Use it in place of RA. |
| |
| 2021-05-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/27905 |
| * config/tc-i386.c (set_code_flag): Revert commit 50c95a739c9. |
| (set_16bit_gcc_code_flag): Likewise. |
| (x86_cleanup): Likewise. |
| * testsuite/gas/i386/code16-2.d: Updated. |
| * testsuite/gas/i386/x86-64-code16-2.d: Likewise. |
| |
| 2021-05-27 Peter Bergner <bergner@linux.ibm.com> |
| |
| * testsuite/gas/ppc/vsx.d <xxmr, xxlnot>: Add tests. |
| * testsuite/gas/ppc/vsx.s: Likewise. |
| |
| 2021-05-27 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-nds32.c (do_pseudo_push_bhwd, do_pseudo_pop_bhwd), |
| (do_pseudo_pusha, do_pseudo_pushi): Avoid fortify strncpy bound |
| error. |
| |
| 2021-05-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/27905 |
| * config/tc-i386.c (set_code_flag): Update x86_feature_2_used |
| with GNU_PROPERTY_X86_FEATURE_2_CODE16 for .code16 in ELF |
| object. |
| (set_16bit_gcc_code_flag): Likewise. |
| (x86_cleanup): Always generate the GNU property note if |
| x86_feature_2_used isn't 0. |
| * testsuite/gas/i386/code16-2.d: New file. |
| * testsuite/gas/i386/code16-2.s: Likewise. |
| * testsuite/gas/i386/x86-64-code16-2.d: Likewise. |
| * testsuite/gas/i386/i386.exp: Run code16-2 and x86-64-code16-2. |
| |
| 2021-05-26 Sebastien Villemot <sebastien@debian.org> |
| |
| PR gas/27906 |
| * doc/c-i386.texi: Replace movsb with movsxb as an alias for |
| movsbq. |
| |
| 2021-05-26 Nelson Chu <nelson.chu@sifive.com> |
| |
| * config/tc-riscv.c (riscv_set_arch): Set |
| check_unknown_prefixed_ext to true for assembler. |
| |
| 2021-05-25 Tamar Christina <tamar.christina@arm.com> |
| |
| PR gas/25235 |
| * config/tc-arm.c (md_convert_frag): Set LSB when Thumb symbol. |
| (relax_adr): Thumb symbols 4 bytes. |
| * testsuite/gas/arm/pr25235.d: New test. |
| * testsuite/gas/arm/pr25235.s: New test. |
| |
| 2021-05-24 Nelson Chu <nelson.chu@sifive.com> |
| |
| PR 25212 |
| * config/tc-riscv.c (riscv_set_abi_by_arch): If -mabi isn't set, we |
| will choose ilp32e abi for rv32e. Besides, report errors for the |
| invalid march and mabi combinations. |
| * testsuite/gas/riscv/mabi-attr-rv32e.s: New testcase. Only accept |
| ilp32e abi for rve extension. |
| * testsuite/gas/riscv/mabi-fail-rv32e-lp64f.d: Likewise. |
| * testsuite/gas/riscv/mabi-fail-rv32e-lp64f.l: Likewise. |
| * testsuite/gas/riscv/mabi-fail-rv32e-lp64d.d: Likewise. |
| * testsuite/gas/riscv/mabi-fail-rv32e-lp64d.l: Likewise. |
| * testsuite/gas/riscv/mabi-fail-rv32e-lp64d.q: Likewise. |
| * testsuite/gas/riscv/mabi-fail-rv32e-lp64d.q: Likewise. |
| Renamed all mabi testcases to their march-mabi settings. |
| |
| 2021-05-22 Alan Modra <amodra@gmail.com> |
| |
| PR 25599 |
| * config/tc-ia64.c (emit_one_bundle): Expand comment for HP-UX |
| adjustment. Add assertion. |
| * testsuite/gas/ia64/reloc-mlx.d: Pass when slot 2 specified |
| for PCREL60B. |
| |
| 2021-05-20 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| * config/tc-z80.c (emit_data_val): Warn on constant overflow. |
| (signed_overflow): New function. |
| (unsigned_overflow): New function. |
| (is_overflow): Use new functions. |
| (md_apply_fix): Use signed_overflow. |
| * testsuite/gas/z80/ez80_adl_suf.d: Fix test. |
| * testsuite/gas/z80/ez80_isuf.s: Likewise. |
| * testsuite/gas/z80/ez80_z80_suf.d: Likewise. |
| |
| 2021-05-20 Nicolas Boulenguez <nicolas@debian.org> |
| |
| PR 27888 |
| * Makefile.am (ZLIB): Define. |
| (as_new_LDADD): Add it. |
| * Makefile.in: Regenerate. |
| |
| 2021-05-17 Alex Coplan <alex.coplan@arm.com> |
| |
| * config/tc-arm.c (do_mve_mov): Only reject vmov if we're moving |
| into the same GPR twice. |
| * testsuite/gas/arm/mve-vmov-bad-2.l: Tweak error message. |
| * testsuite/gas/arm/mve-vmov-3.d: New test. |
| * testsuite/gas/arm/mve-vmov-3.s: New test. |
| |
| 2021-05-12 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/elf/dwarf-5-file0.d: Update. |
| * testsuite/gas/i386/dwarf5-line-1.d: Update. |
| |
| 2021-05-11 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| PR 27823 |
| * config/tc-z80.c (emit_ld_r_m): Report an illegal load |
| instruction. |
| * testsuite/gas/z80/ill_ops.s: New test source file. |
| * testsuite/gas/z80/ill_ops.d: New test driver. |
| * testsuite/gas/z80/ill_ops.l: New test error output. |
| |
| 2021-05-10 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| PR 27415 |
| * config/tc-z80.c (emit_data_val): Add support for 8-bit and |
| 24-bit shifts. |
| * testsuite/gas/z80/z80_reloc.a: Update tests. |
| * testsuite/gas/z80/z80_reloc.d: Update expected disassembly. |
| |
| 2021-05-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * doc/Makefile.am (html-local, as/index.html): New targets. |
| * doc/Makefile.in: Regenerate. |
| |
| 2021-05-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * doc/Makefile.am (AM_MAKEINFOFLAGS): Add --no-split. |
| * doc/Makefile.in: Regenerate. |
| |
| 2021-05-07 Nick Clifton <nickc@redhat.com> |
| |
| PR 3136 |
| * config/obj-elf.c (elf_pseudo_table): Add entry for .bss. |
| (obj_elf_bss): New function. Change to the .bss section. |
| Support an optional subsection number. |
| (obj_elf_change_section): Call obj_elf_section_change_hook. |
| (obj_elf_section): Likewise. |
| (obj_elf_data): Likewise. |
| (obj_elf_text): Likewise. |
| (obj_elf_struct): Likewise. |
| (obj_elf_subsection): Likewise. |
| (obj_elf_previous): Likewise. |
| * config/obj-elf.h (obj_elf_bss): Prototype. |
| * doc/as.texi (Bss): New node. |
| |
| 2021-05-07 Clément Chigot <clement.chigot@atos.net> |
| |
| * config/obj-coff.c (coff_frob_symbol): Don't skip C_DWARF. |
| (coff_adjust_section_syms): Use corrext auxent for C_DWARF. |
| (coff_frob_section): Likewise. |
| * config/obj-coff.h (SA_GET_SECT_SCNLEN, |
| SA_GET_SECT_NRELOC, SA_SET_SECT_SCNLEN, |
| SA_SET_SECT_NRELOC) New defines. |
| (SET_SECTION_RELOCS): Adjust for C_DWARF. |
| * config/tc-ppc.c (ppc_frob_symbol): Don't skip C_DWARF. |
| (ppc_adjust_symtab): Reorder C_DWARF symbols. |
| * testsuite/gas/ppc/aix.exp: New tests. |
| * testsuite/gas/ppc/xcoff-dwsect-2-32.d: New test. |
| * testsuite/gas/ppc/xcoff-dwsect-2-64.d: New test. |
| * testsuite/gas/ppc/xcoff-dwsect-2.s: New test. |
| |
| * config/tc-ppc.c (ppc_function): Update comment for |
| fifth argument. |
| (ppc_frob_symbol): Remove ppc_last_function check. |
| Make sure coff_last_function is reset. |
| Correctly set fsize when not provided in .function. |
| * testsuite/gas/ppc/aix.exp: New tests. |
| * testsuite/gas/ppc/xcoff-function-1-32.d: New test. |
| * testsuite/gas/ppc/xcoff-function-1-64.d: New test. |
| * testsuite/gas/ppc/xcoff-function-1.s: New test. |
| |
| 2021-05-07 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/rela.s, testsuite/gas/i386/rela.d: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2021-05-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (output_disp): Use disps field instead of |
| imms one. |
| |
| 2021-05-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (i386_finalize_immediate): Move register |
| check ... |
| (i386_immediate): ... here. |
| |
| 2021-05-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_imm): Drop redundant masking. |
| Re-arrange operand type accumulation. |
| |
| 2021-05-06 Stafford Horne <shorne@gmail.com> |
| |
| PR 21464 |
| * testsuite/gas/or1k/reloc-1.s: Add test for new relocation. |
| * testsuite/gas/or1k/reloc-1.d: Add test result for new |
| relocation. |
| |
| 2021-05-03 Christoph Muellner <cmuellner@gcc.gnu.org> |
| |
| PR 27764 |
| * testsuite/gas/riscv/a-ext-64.d: New testcase. |
| * testsuite/gas/riscv/a-ext-64.s: Likewise. |
| * testsuite/gas/riscv/a-ext.d: Likewise. |
| * testsuite/gas/riscv/a-ext.s: Likewise. |
| |
| 2021-05-03 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.h (TC_PARSE_CONS_EXPRESSION): Adjust surrounding |
| #if. |
| * testsuite/gas/i386/secrel.s: Convert some .secrel32 to .long. |
| Add two further .long and an .equ. |
| * testsuite/gas/i386/secrel.d: Adjust expecations. |
| |
| 2021-05-03 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/secrel.d, testsuite/gas/i386/secrel.s: |
| Convert Windows to UNIX EOL. |
| |
| 2021-05-03 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (lex_got): Adjust surrounding #if. Fold TE_PE |
| variant into ELF one. |
| |
| 2021-05-03 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/elf/section25.s: Don't start directives in first |
| column. |
| * testsuite/gas/elf/section26.s: Likewise. |
| |
| 2021-04-29 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/i386.exp: Move x86-64-rip-2 invocation. |
| * testsuite/gas/i386/lea64.d, |
| testsuite/gas/i386/lea64-optimize.d: Allow for COFF relocs. |
| * testsuite/gas/i386/x86-64-rip-inval-1.s, |
| testsuite/gas/i386/x86-64-rip-inval-2.s. Add .end. |
| |
| 2021-04-29 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (i386_validate_fix): Change return type to |
| int. Short-circuit BFD_RELOC_SIZE* handling. |
| (tc_gen_reloc): New local variable sym. Extend logic when |
| processing BFD_RELOC_SIZE*. |
| * config/tc-i386.f (i386_validate_fix): Change return type to |
| int. |
| (TC_VALIDATE_FIX): Proceed to SKIP when i386_validate_fix() |
| returns zero. |
| * testsuite/gas/i386/size-5.s, testsuite/gas/i386/size-5a.d, |
| testsuite/gas/i386/size-5b.d: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2021-04-29 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (tc_gen_reloc): Use section size for section |
| symbols when resolving BFD_RELOC_SIZE*. |
| * testsuite/gas/i386/size-2.s: Add section size cases. |
| * testsuite/gas/i386/size-2.d, |
| testsuite/gas/i386/x86-64-size-2.d: Adjust expectations. |
| |
| 2021-04-28 Jan Beulich <jbeulich@suse.com> |
| H.J. Lu <hjl.tools@gmail.com> |
| |
| PR gas/27763 |
| * config/tc-i386.c (output_jump): Also mark 2-byte relocs as |
| signed for XBEGIN. Also mark 4-byte relocs as signed for 64-bit. |
| (output_disp): Also mark 4-byte relocs as signed for 64-bit. |
| (md_estimate_size_before_relax): Move local variable fixP. Set |
| it from fix_new() return values. Mark 4-byte relocs as signed |
| for 64-bit. |
| * testsuite/gas/i386/pcrel64.s, testsuite/gas/i386/pcrel64.l, |
| * testsuite/gas/i386/x86-64-rip-2.s, |
| * testsuite/gas/i386/x86-64-rip-2.d, |
| * testsuite/gas/i386/x86-64-rip-inval-1.s, |
| * testsuite/gas/i386/x86-64-rip-inval-1.l, |
| * testsuite/gas/i386/x86-64-rip-inval-2.s, |
| * testsuite/gas/i386/x86-64-rip-inval-2.l: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2021-04-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (optimize_encoding): Add () to silence GCC 5. |
| |
| 2021-04-26 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (tc_gen_reloc): Check IS_ELF for |
| BFD_RELOC_SIZE*. |
| |
| 2021-04-26 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (tc_gen_reloc): Limit BFD_RELOC_SIZE32 |
| overflow check to 64-bit objects. |
| |
| 2021-04-26 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (want_disp32): Also check for SIZE32. |
| (optimize_encoding): Handle LEA. |
| * testsuite/gas/i386/lea.s, testsuite/gas/i386/lea.d, |
| testsuite/gas/i386/lea.e, testsuite/gas/i386/lea-optimize.d: |
| Add many more forms. |
| * testsuite/gas/i386/lea16.s, testsuite/gas/i386/lea16-optimize.d, |
| testsuite/gas/i386/lea64.s, testsuite/gas/i386/lea64.d, |
| testsuite/gas/i386/lea64.e, testsuite/gas/i386/lea64-optimize.d: |
| New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2021-04-26 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (md_apply_fix): Mark BFD_RELOC_X86_64_32S as |
| signed. |
| * testsuite/gas/i386/x86-64-addr32-bad.s, |
| testsuite/gas/i386/x86-64-addr32-bad.l: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2021-04-23 Eric Botcazou<ebotcazou@adacore.com> |
| |
| * testsuite/gas/elf/section25.d: Run it everywhere. |
| * testsuite/gas/elf/section26.d: Likewise. |
| * testsuite/gas/elf/section26.s: Add test for .persistent.bss. |
| |
| 2021-04-23 Jérôme Gardou <jerome.gardou@gmail.com> |
| |
| * config/obj-coff-seh.c (obj_coff_seh_pushframe): Allow an |
| optional "code" argument. |
| |
| 2021-04-23 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (want_disp32): New. |
| (md_assemble): Use it. |
| (optimize_disp): Likewise. |
| (build_modrm_byte): Likewise. |
| |
| 2021-04-23 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (i386_finalize_displacement): Move Disp32S |
| check ... |
| (md_assemble): ... here. |
| |
| 2021-04-23 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_disp): Move down BFD64 section. |
| Move up setting of disp32. |
| |
| 2021-04-23 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (pe): Don't truncate expression value. |
| (i386_finalize_displacement): Likewise. |
| |
| 2021-04-21 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/gas/aarch64/dwarf.d: Adjust expected output to allow |
| for named section symbols. |
| * testsuite/gas/arm/thumbver.d: Likewise. |
| * testsuite/gas/bfin/loop_temps.d: Likewise. |
| * testsuite/gas/elf/section2.e-arc: Likewise. |
| * testsuite/gas/elf/section2.e-arm: Likewise. |
| * testsuite/gas/elf/section2.e-csky: Likewise. |
| * testsuite/gas/elf/section2.e-m32r: Likewise. |
| * testsuite/gas/elf/section2.e-mips: Likewise. |
| * testsuite/gas/elf/section2.e-msp430: Likewise. |
| * testsuite/gas/elf/section2.e-riscv: Likewise. |
| * testsuite/gas/elf/section2.e-rl78: Likewise. |
| * testsuite/gas/elf/section2.e-rx: Likewise. |
| * testsuite/gas/elf/section2.e-score: Likewise. |
| * testsuite/gas/elf/section2.e-tic6x: Likewise. |
| * testsuite/gas/elf/section2.e-unused: Likewise. |
| * testsuite/gas/elf/section2.e-v850: Likewise. |
| * testsuite/gas/elf/section2.e-xtensa: Likewise. |
| * testsuite/gas/ia64/alias-ilp32.d: Likewise. |
| * testsuite/gas/ia64/alias.d: Likewise. |
| * testsuite/gas/ia64/global.d: Likewise. |
| * testsuite/gas/microblaze/relax_size.elf: Likewise. |
| * testsuite/gas/microblaze/relax_size2.elf: Likewise. |
| * testsuite/gas/mips/global-local-symtab-sort-n64t.d: Likewise. |
| * testsuite/gas/mips/global-local-symtab-sort-o32t.d: Likewise. |
| * testsuite/gas/mmix/bspec-1.d: Likewise. |
| * testsuite/gas/mmix/byte-1.d: Likewise. |
| * testsuite/gas/mmix/comment-1.d: Likewise. |
| * testsuite/gas/mmix/loc-1.d: Likewise. |
| * testsuite/gas/mmix/loc-2.d: Likewise. |
| * testsuite/gas/mmix/loc-3.d: Likewise. |
| * testsuite/gas/mmix/loc-4.d: Likewise. |
| * testsuite/gas/mmix/loc-5.d: Likewise. |
| * testsuite/gas/tic6x/scomm-directive-4.d: Likewise. |
| |
| 2021-04-20 Clément Chigot <clement.chigot@atos.net> |
| |
| PR binutils/21700 |
| * config/tc-ppc.c (ppc_get_csect_to_adjust): New function. |
| (ppc_fix_adjustable): Manage fx_subsy part. |
| (tc_gen_reloc): Create second relocation when both |
| fx_addsy and fx_subsy are provided. |
| * config/tc-ppc.h (RELOC_EXPANSION_POSSIBLE): New define. |
| (MAX_RELOC_EXPANSION): Likewise. |
| (TC_FORCE_RELOCATION_SUB_SAME): Likewise |
| (UNDEFINED_DIFFERENCE_OK): Likewise |
| * testsuite/gas/all/gas.exp: Skip difference between two |
| undefined symbols test. |
| |
| 2021-04-19 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/gas/all/gas.exp: Add rs6000*-*-aix* to the list of |
| targets which should skip the undefined symbols test. |
| |
| 2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * NEWS: Update news. |
| * testsuite/gas/aarch64/rme.d: Update test. |
| * testsuite/gas/aarch64/rme.s: Update test. |
| |
| 2021-04-19 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * testsuite/gas/aarch64/rme.d: Update test. |
| * testsuite/gas/aarch64/rme.s: Update test. |
| |
| 2021-04-19 Jan Beulich <jbeulich@suse.com> |
| |
| * as.h (sprint_value): Delete. |
| * messages.c (sprint_value): Likewise. |
| * config/tc-i386.c (offset_in_range): Use bfd_sprintf_vma in |
| place of sprint_value. |
| * config/tc-s390.c (s390_insert_operand): Likewise. |
| * doc/internals.texi (sprint_value): Delete section. |
| * write.c (fixup_segment): Likewise. |
| (relax_segment): Likewise. |
| |
| 2021-04-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * testsuite/gas/aarch64/rme-invalid.d: New test. |
| * testsuite/gas/aarch64/rme-invalid.l: New test. |
| * testsuite/gas/aarch64/rme-invalid.s: New test. |
| * testsuite/gas/aarch64/rme.d: New test. |
| * testsuite/gas/aarch64/rme.s: New test. |
| |
| 2021-04-16 Nelson Chu <nelson.chu@sifive.com> |
| |
| PR 27436 |
| * config/tc-riscv.c (riscv_ip): make operand C> work the same as >. |
| * testsuite/gas/riscv/shamt-32.d: New testcase. |
| * testsuite/gas/riscv/shamt-32.l: Likewise. |
| * testsuite/gas/riscv/shamt-32.s: Likewise. |
| * testsuite/gas/riscv/shamt-64.d: Likewise. |
| * testsuite/gas/riscv/shamt-64.l: Likewise. |
| * testsuite/gas/riscv/shamt-64.s: Likewise. |
| |
| 2021-04-16 Lifang Xia <lifang_xia@c-sky.com> |
| |
| * testsuite/gas/riscv/c-zero-imm.d: Compress addi a4,a4,0 to |
| c.mv a4,a4. |
| * testsuite/gas/riscv/c-zero-imm.s: Likewise. |
| |
| 2021-04-14 Alan Modra <amodra@gmail.com> |
| |
| PR 27723 |
| * dw2gencfi.c (initial_cie_insn): New function, extracted from.. |
| (select_cie_for_fde): ..here. Simplify. |
| |
| 2021-04-14 Alan Modra <amodra@gmail.com> |
| |
| PR 27723 |
| * dw2gencfi.c (select_cie_for_fde): Handle DW_CFA_val_offset, |
| DW_CFA_GNU_window_save and DW_CFA_restore_state. |
| |
| 2021-04-13 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/m68hc11/m68hc11.exp (gas_m68hc11_message): Don't |
| write to $srcdir. Use gas_host_run and read output file rather |
| than gas_start/gas_finish. |
| |
| 2021-04-12 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (insn_validate): Use uint64_t for operand values. |
| (md_assemble): Likewise. Handle bignum operands. |
| (ppc_elf_suffix): Handle O_big. Remove unnecessary input_line_pointer |
| check. |
| * expr.c: Delete unnecessary forward declarations. |
| (generic_bignum_to_int32): Return uint32_t. |
| (generic_bignum_to_int64): Return uint64_t. Compile always. |
| (operand): Twiddle X_extrabit for unary '~'. Set X_unsigned and |
| clear X_extrabit for unary '!'. |
| * expr.h (generic_bignum_to_int32): Declare. |
| (generic_bignum_to_int64): Declare. |
| * testsuite/gas/ppc/prefix-pcrel.s, |
| * testsuite/gas/ppc/prefix-pcrel.d: Add more instructions. |
| |
| 2021-04-12 Nelson Chu <nelson.chu@sifive.com> |
| |
| * testsuite/gas/riscv/march-fail-order-x-std.d: Renamed from |
| march-fail-porder-x-std.d. |
| * testsuite/gas/riscv/march-fail-order-z-std.d: Renamed from |
| march-fail-porder-z-std.d. |
| * testsuite/gas/riscv/march-fail-order-x-z.d: Renamed from |
| march-fail-porder-x-z.d. |
| * testsuite/gas/riscv/march-fail-order-zx-std.l: Added to replace |
| march-fail-porder.l. |
| * testsuite/gas/riscv/march-fail-order-x-z.l: Likewise. |
| * testsuite/gas/riscv/march-fail-order-x.l: Updated. |
| * testsuite/gas/riscv/march-fail-order-z.l: Likewise. |
| * testsuite/gas/riscv/march-fail-single-prefix-h.d: Renamed from |
| march-fail-single-char-h.d. |
| * testsuite/gas/riscv/march-fail-single-prefix-s.d: Renamed from |
| march-fail-single-char-s.d. |
| * testsuite/gas/riscv/march-fail-single-prefix-x.d: Renamed from |
| march-fail-single-char-x.d. |
| * testsuite/gas/riscv/march-fail-single-prefix-z.d: Renamed from |
| march-fail-single-char-z.d. |
| * testsuite/gas/riscv/march-fail-single-prefix-zmx.d: Added. |
| * testsuite/gas/riscv/march-fail-single-prefix.l: Added to replace |
| march-fail-single-prefix.l. |
| * testsuite/gas/riscv/march-fail-unknown-zxm.d: Added. |
| * testsuite/gas/riscv/march-fail-unknown-std.l: Updated. |
| * testsuite/gas/riscv/march-fail-unknown.l: Likewise. |
| |
| 2021-04-09 Tejas Belagod <tejas.belagod@arm.com> |
| |
| * config/tc-aarch64.c (warn_unpredictable_ldst): Clean-up |
| diagnostic messages for LD/ST Exclusive instructions. |
| * testsuite/gas/aarch64/diagnostic.s: Add a diagnostic test for STLXP. |
| * testsuite/gas/aarch64/diagnostic.l: Fix-up test after message |
| clean-up. |
| |
| 2021-04-09 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/ppc/prefix-pcrel.d: Update expected output. |
| * testsuite/gas/ppc/prefix-reloc.d: Likewise. |
| * gas/testsuite/gas/ppc/vsx_32byte.d: Likewise. |
| |
| 2021-04-08 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/ppc/pr27676.d, |
| * testsuite/gas/ppc/pr27676.s: New test. |
| * testsuite/gas/ppc/ppc.exp: Run it. |
| * testsuite/gas/ppc/dcbt.d: Update. |
| * testsuite/gas/ppc/power4_32.d: Update. |
| |
| 2021-04-07 Alan Modra <amodra@gmail.com> |
| |
| PR 27217 |
| * testsuite/gas/aarch64/pr27217.d: Correct name. Accept ilp32 relocs. |
| |
| 2021-04-06 Nick Clifton <nickc@redhat.com> |
| |
| PR 27217 |
| * config/tc-aarch64.c (my_get_expression): Rename to |
| aarch64_get_expression. Add a fifth argument to enable deferring |
| of expression resolution. |
| (parse_typed_reg): Update calls to my_get_expression. |
| (parse_vector_reg_list): Likewise. |
| (parse_immediate_expression): Likewise. |
| (parse_big_immediate): Likewise. |
| (parse_shift): Likewise. |
| (parse_shifter_operand_imm): Likewise. |
| (parse_operands): Likewise. |
| (parse_shifter_operand_reloc): Update calls to my_get_expression |
| and call aarch64_force_reloc to determine the value of the new |
| fifth argument. |
| (parse_address_main): Likewise. |
| (parse_half): Likewise. |
| (parse_adrp): Likewise. |
| (aarch64_force_reloc): New function. Contains code extracted from... |
| (aarch64_force_relocation): ... here. |
| * testsuite/gas/aarch64/pr27217.s: New test case. |
| * testsuite/gas/aarch64/pr27217.d: New test driver. |
| |
| 2021-04-06 Jan Beulich <jbeulich@suse.com> |
| |
| * write.c (fixup_segment): Move add_symbol_segment declaration |
| into main loop. |
| |
| 2021-04-05 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac: Don't check for string.h, strings.h, stdlib.h, |
| errno.h, limits.h, locale.h or time.h. Don't check for unlink, |
| remove, sbrk (unused) or setlocale. Adjust gas_test_headers. |
| Don't check for errno, free, malloc, realoc, sbrk, strstr, getenv |
| strstr, or vsnprintf declarations. |
| (AC_ISC_POSIX, AC_FUNC_ALLOCA, AC_C_INLINE): Don't invoke. |
| * as.h: Don't include alloca-conf.h, include config.h instead. |
| Include string.h, stdlib.h, errno.h unconditionally. Remove |
| various fallback declarations. |
| * asintl.h: Don't test HAVE_LOCALE_H. |
| * as.c: Don't test HAVE_SETLOCALE. |
| * dwarf2dbg.c: Include limits.h unconditionally. |
| * expr.c: Likewise. |
| * sb.c: Likewise. |
| * symbols.c: Likewise. |
| * config/tc-cr16.c: Likewise. |
| * config/tc-d30v.c: Likewise. |
| * config/tc-i386.c: Likewise. |
| * config/tc-ia64.c: Likewise. |
| * config/tc-tic54x.c (tic54x_mlib): Call remove rather than unlink. |
| * config.in: Regenerate. |
| * configure: Regenerate. |
| * Makefile.in: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| |
| 2021-04-01 Martin Liska <mliska@suse.cz> |
| |
| * config/obj-coff.c (strneq): Remove strneq and use startswith. |
| (weak_is_altname): Likewise. |
| (obj_coff_section): Likewise. |
| * config/tc-cr16.c (process_label_constant): Likewise. |
| * config/tc-crx.c (strneq): Likewise. |
| |
| 2021-04-01 Martin Liska <mliska@suse.cz> |
| |
| * as.c (select_emulation_mode): Use startswith. |
| * config/m68k-parse.y: Likewise. |
| * config/obj-aout.c (obj_aout_type): Likewise. |
| * config/obj-elf.c (elf_common_parse): Likewise. |
| (obj_elf_section_type): Likewise. |
| (obj_elf_section_word): Likewise. |
| (obj_elf_section): Likewise. |
| (obj_elf_symver): Likewise. |
| (adjust_stab_sections): Likewise. |
| * config/obj-evax.c (evax_shorten_name): Likewise. |
| * config/obj-macho.c (obj_mach_o_is_frame_section): Likewise. |
| * config/tc-aarch64.c (parse_aarch64_imm_float): Likewise. |
| (aarch64_parse_features): Likewise. |
| (create_register_alias): Likewise. |
| (aarch64_data_in_code): Likewise. |
| (md_parse_option): Likewise. |
| * config/tc-alpha.c (s_alpha_section_word): Likewise. |
| (s_alpha_pdesc): Likewise. |
| * config/tc-arc.c (tokenize_extregister): Likewise. |
| * config/tc-arm.c (create_register_alias): Likewise. |
| (create_neon_reg_alias): Likewise. |
| (parse_ifimm_zero): Likewise. |
| (parse_qfloat_immediate): Likewise. |
| (arm_elf_section_type): Likewise. |
| (arm_parse_extension): Likewise. |
| (aeabi_set_public_attributes): Likewise. |
| (s_arm_arch_extension): Likewise. |
| (arm_data_in_code): Likewise. |
| (start_unwind_section): Likewise. |
| * config/tc-avr.c (avr_ldi_expression): Likewise. |
| * config/tc-csky.c (is_freglist_legal): Likewise. |
| (csky_s_section): Likewise. |
| * config/tc-d30v.c (do_assemble): Likewise. |
| * config/tc-dlx.c (parse_operand): Likewise. |
| * config/tc-epiphany.c (md_assemble): Likewise. |
| * config/tc-h8300.c (h8300_elf_section): Likewise. |
| (get_operand): Likewise. |
| * config/tc-hppa.c (pa_ip): Likewise. |
| (pa_level): Likewise. |
| (pa_space): Likewise. |
| * config/tc-i386.c (i386_mach): Likewise. |
| (md_assemble): Likewise. |
| (check_VecOperations): Likewise. |
| (i386_target_format): Likewise. |
| (i386_elf_section_type): Likewise. |
| * config/tc-ia64.c (start_unwind_section): Likewise. |
| (md_parse_option): Likewise. |
| (is_taken_branch): Likewise. |
| (idesc->name,): Likewise. |
| (note_register_values): Likewise. |
| (do_alias): Likewise. |
| * config/tc-m32c.c (insn_to_subtype): Likewise. |
| * config/tc-m68hc11.c (get_operand): Likewise. |
| (md_assemble): Likewise. |
| * config/tc-m68k.c (m68k_ip): Likewise. |
| (m68k_elf_suffix): Likewise. |
| * config/tc-mcore.c (mcore_s_section): Likewise. |
| * config/tc-metag.c (parse_get_set): Likewise. |
| (md_parse_option): Likewise. |
| * config/tc-microblaze.c (parse_imm): Likewise. |
| (check_got): Likewise. |
| (md_apply_fix): Likewise. |
| * config/tc-mips.c (CPU_HAS_MIPS16): Likewise. |
| (md_begin): Likewise. |
| (s_is_linkonce): Likewise. |
| (check_regno): Likewise. |
| (match_float_constant): Likewise. |
| (classify_vr4120_insn): Likewise. |
| (match_insn): Likewise. |
| (mips_after_parse_args): Likewise. |
| (s_change_sec): Likewise. |
| (s_option): Likewise. |
| (parse_code_option): Likewise. |
| (md_section_align): Likewise. |
| (nopic_need_relax): Likewise. |
| * config/tc-mmix.c (mmix_handle_mmixal): Likewise. |
| * config/tc-mn10300.c (mn10300_fix_adjustable): Likewise. |
| (mn10300_end_of_match): Likewise. |
| * config/tc-msp430.c (msp430_make_init_symbols): Likewise. |
| * config/tc-nds32.c (nds32_parse_option): Likewise. |
| * config/tc-nds32.h (md_do_align): Likewise. |
| * config/tc-nios2.c (strprefix): Likewise. |
| (nios2_special_relocation_p): Likewise. |
| (nios2_parse_base_register): Likewise. |
| (nios2_cons): Likewise. |
| * config/tc-ns32k.c (addr_mode): Likewise. |
| * config/tc-pdp11.c (set_option): Likewise. |
| (parse_reg): Likewise. |
| (parse_ac5): Likewise. |
| (parse_op_no_deferred): Likewise. |
| (set_cpu_model): Likewise. |
| (set_machine_model): Likewise. |
| * config/tc-pj.c (md_operand): Likewise. |
| * config/tc-ppc.c (ppc_set_cpu): Likewise. |
| (ppc_arch): Likewise. |
| (ppc_section_type): Likewise. |
| * config/tc-s12z.c (tb_reg_rel): Likewise. |
| (tb_opr_rel): Likewise. |
| * config/tc-s390.c (s390_parse_cpu): Likewise. |
| (md_parse_option): Likewise. |
| * config/tc-score.c (s3_nopic_need_relax): Likewise. |
| (s3_pic_need_relax): Likewise. |
| * config/tc-score7.c (s7_nopic_need_relax): Likewise. |
| (s7_pic_need_relax): Likewise. |
| * config/tc-sh.h (SUB_SEGMENT_ALIGN): Likewise. |
| * config/tc-sparc.c (md_parse_option): Likewise. |
| (sparc_ip): Likewise. |
| (s_reserve): Likewise. |
| (s_common): Likewise. |
| (s_seg): Likewise. |
| (sparc_cons): Likewise. |
| * config/tc-tic54x.c (stag_add_field): Likewise. |
| (tic54x_endstruct): Likewise. |
| * config/tc-tic6x.c (tic6x_start_unwind_section): Likewise. |
| * config/tc-v850.c (v850_comm): Likewise. |
| (md_begin): Likewise. |
| (md_assemble): Likewise. |
| * config/tc-vax.c (vax_cons): Likewise. |
| * config/tc-wasm32.c (wasm32_leb128): Likewise. |
| * config/tc-xstormy16.c (md_operand): Likewise. |
| * config/tc-xtensa.c (get_directive): Likewise. |
| (xg_instruction_matches_option_term): Likewise. |
| (is_unaligned_label): Likewise. |
| (cache_literal_section): Likewise. |
| * config/xtensa-relax.c (parse_precond): Likewise. |
| (parse_option_cond): Likewise. |
| (transition_applies): Likewise. |
| (wide_branch_opcode): Likewise. |
| * dw2gencfi.c: Likewise. |
| * dwarf2dbg.c (dwarf2_directive_filename): Likewise. |
| * ehopt.c (get_cie_info): Likewise. |
| * input-file.c (input_file_open): Likewise. |
| * listing.c (listing_newline): Likewise. |
| (debugging_pseudo): Likewise. |
| * read.c (read_a_source_file): Likewise. |
| * write.c (adjust_reloc_syms): Likewise. |
| (compress_debug): Likewise. |
| (maybe_generate_build_notes): Likewise. |
| |
| 2021-03-31 Alan Modra <amodra@gmail.com> |
| |
| * itbl-lex-wrapper.c: Include as.h not sysdep.h. |
| * config/bfin-lex-wrapper.c: Likewise. |
| * itbl-lex.l: Don't include as.h. |
| * config/bfin-lex.l: Likewise. |
| |
| 2021-03-31 Alan Modra <amodra@gmail.com> |
| |
| * as.h (POISON_BFD_BOOLEAN): Define. |
| * as.c, * as.h, * atof-generic.c, * config/atof-ieee.c, |
| * config/bfin-aux.h, * config/obj-coff.c, * config/obj-ecoff.c, |
| * config/obj-elf.c, * config/obj-elf.h, * config/obj-som.c, |
| * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, |
| * config/tc-arc.h, * config/tc-arm.c, * config/tc-arm.h, |
| * config/tc-avr.c, * config/tc-avr.h, * config/tc-bfin.c, |
| * config/tc-bfin.h, * config/tc-bpf.c, * config/tc-cris.c, |
| * config/tc-csky.c, * config/tc-csky.h, * config/tc-d10v.c, |
| * config/tc-d10v.h, * config/tc-d30v.c, * config/tc-d30v.h, |
| * config/tc-dlx.c, * config/tc-dlx.h, * config/tc-epiphany.c, |
| * config/tc-epiphany.h, * config/tc-fr30.c, * config/tc-fr30.h, |
| * config/tc-frv.c, * config/tc-frv.h, * config/tc-ft32.c, |
| * config/tc-ft32.h, * config/tc-h8300.c, * config/tc-hppa.c, |
| * config/tc-i386-intel.c, * config/tc-i386.c, * config/tc-ia64.c, |
| * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-iq2000.h, |
| * config/tc-lm32.c, * config/tc-lm32.h, * config/tc-m32c.c, |
| * config/tc-m32c.h, * config/tc-m32r.c, * config/tc-m32r.h, |
| * config/tc-m68hc11.c, * config/tc-m68k.c, * config/tc-mcore.c, |
| * config/tc-mcore.h, * config/tc-mep.c, * config/tc-mep.h, |
| * config/tc-metag.c, * config/tc-metag.h, |
| * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mips.h, |
| * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, |
| * config/tc-mn10300.h, * config/tc-moxie.c, * config/tc-msp430.c, |
| * config/tc-msp430.h, * config/tc-mt.c, * config/tc-mt.h, |
| * config/tc-nds32.c, * config/tc-nds32.h, * config/tc-nios2.c, |
| * config/tc-ns32k.c, * config/tc-or1k.c, * config/tc-or1k.h, |
| * config/tc-pdp11.c, * config/tc-ppc.c, * config/tc-pru.c, |
| * config/tc-pru.h, * config/tc-riscv.c, * config/tc-riscv.h, |
| * config/tc-rx.c, * config/tc-rx.h, * config/tc-s12z.c, |
| * config/tc-s12z.h, * config/tc-s390.c, * config/tc-score.c, |
| * config/tc-score.h, * config/tc-score7.c, * config/tc-sh.c, |
| * config/tc-sh.h, * config/tc-spu.c, * config/tc-tic54x.c, |
| * config/tc-tic6x.c, * config/tc-tic6x.h, * config/tc-tilegx.c, |
| * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-v850.h, |
| * config/tc-visium.c, * config/tc-visium.h, * config/tc-wasm32.c, |
| * config/tc-wasm32.h, * config/tc-xc16x.c, * config/tc-xgate.c, |
| * config/tc-xstormy16.c, * config/tc-xstormy16.h, |
| * config/tc-xtensa.c, * config/tc-xtensa.h, * config/tc-z80.c, |
| * config/tc-z8k.c, * config/xtensa-istack.h, |
| * config/xtensa-relax.c, * config/xtensa-relax.h, * dw2gencfi.c, |
| * dwarf2dbg.c, * dwarf2dbg.h, * expr.c, * expr.h, * frags.c, |
| * frags.h, * listing.c, * macro.c, * output-file.c, * read.c, |
| * read.h, * stabs.c, * symbols.c, * write.c: Replace bfd_boolean |
| with bool, FALSE with false, and TRUE with true. |
| |
| 2021-03-31 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-aarch64.c: Include stdint.h in place of bfd_stdint.h. |
| * config/tc-crx.c: Likewise. |
| * config/tc-nds32.h: Likewise. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (build_modrm_byte): Change return type. |
| Change type of "default_seg". Use NULL. Adjust setting of |
| "default_seg". |
| (reg_ds, reg_es, reg_ss): New. |
| (struct _i386_insn): Change type of seg[]. |
| (md_begin): Initialize reg_ds, reg_es, and reg_ss. |
| (swap_operands): Change type of "temp_seg". |
| (check_string): Adjust %es check. |
| (process_operands): Change type of "default_seg". Use NULL. |
| Adjust segment override processing.. |
| (i386_att_operand): Adjust segment override handling. |
| * config/tc-i386-intel.c (i386_intel_operand): Likewise. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (reg_eax): New. |
| (md_begin): Initialize reg_eax. |
| * config/tc-i386-intel.c (i386_intel_simplify_register): Use |
| reg_eax. |
| (i386_intel_simplify): Likewise. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (reg_st0): New. |
| (md_begin): Convert to switch(). Initialize reg_st0. Don't |
| insert other st(N). |
| (parse_real_register): Adjust st(N) processing. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (rc_op): Delete. |
| (struct Rounding_Operation): Move ... |
| (struct _i386_insn): ... here. Change field "rounding". |
| (build_evex_prefix): Adjust rounding processing. |
| (swap_2_operands): Likewise. |
| (check_VecOperands): Likewise. |
| (RC_SAE_immediate): Likewise. |
| (optimize_encoding): Adjust check for rounding. |
| (build_modrm_byte): Likewise. |
| (output_imm): Likewise. |
| (md_assemble): Initialize rounding type. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (broadcast_op): Delete. |
| (struct Broadcast_Operation): Move ... |
| (struct _i386_insn): ... here. Change field "broadcast". |
| (match_mem_size): Adjust check for broadcast. |
| (optimize_encoding): Likewise. |
| (process_suffix): Likewise. |
| (build_evex_prefix): Adjust broadcast processing. |
| (swap_2_operands): Likewise. |
| (check_VecOperations): Likewise. |
| (match_template): Likewise. |
| (check_VecOperands): Likewise. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (reg_k0): New. |
| (mask_op): Delete. |
| (struct Mask_Operation): Move ... |
| (struct _i386_insn): ... here. Change field "mask". |
| (md_begin): Initialize reg_k0. |
| (build_evex_prefix): Adjust mask processing. |
| (swap_2_operands): Likewise. |
| (check_VecOperands): Likewise. |
| (check_VecOperations): Likewise. |
| (optimize_encoding): Adjust checks for masking. |
| (output_insn): Likewise. |
| |
| 2021-03-30 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (swap_2_operands): Switch parameters to |
| unsigned. |
| (struct RC_Operation): Switch operand field to unsigned. |
| (struct Mask_Operation): Likewise. |
| (struct Broadcast_Operation): Likewise. |
| (build_evex_prefix): Drop cast. |
| (check_VecOperands): Likewise. |
| (build_modrm_byte): Likewise. |
| (output_imm): Likewise. |
| (check_VecOperations): Add casts to unsigned. |
| |
| 2021-03-29 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/x86-64-sse2avx.s: Add vpsadbw case. |
| * testsuite/gas/i386/x86-64-avx-swap-2.d. |
| testsuite/gas/i386/x86-64-sse2avx.d: Adjust expectations. |
| |
| 2021-03-29 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_encoding): Replace VEX-encoding |
| checks by opcodespace ones. |
| (insert_lfence_before): Likewise. |
| (maybe_fused_with_jcc_p): Likewise. |
| (add_branch_padding_frag_p): Likewise. |
| (output_disp): Likewise. |
| (load_insn_p): Re-arrange checks to key applicable ones off of |
| an opcodespace check. |
| (md_assemble): Adjust opcode checks. |
| (check_byte_reg): Likewise. |
| (process_operands): Likewise. |
| (i386_index_check): Likewise. |
| (process_suffix): Likewise. New local variable is_movx. Adjust |
| movsx/movzx and crc32 handling. |
| (output_insn): Adjust opcode checks. Drop no longer reachable |
| case labels. Output legacy encoding prefixes in addition to the |
| base_opcode byte(s). Rework counting of prefixes for extended |
| opcode maps. |
| * config/tc-i386-intel.c (i386_intel_simplify_register): Adjust |
| opcode checks. |
| |
| 2021-03-29 Alan Modra <amodra@gmail.com> |
| |
| * atof-generic.c (FALSE, TRUE): Don't define. |
| * config/obj-elf.h (FALSE, TRUE): Don't define. |
| * config/obj-som.h (FALSE, TRUE): Don't define. |
| * config/tc-hppa.h (FALSE, TRUE): Don't define. |
| * config/tc-pdp11.c (FALSE, TRUE): Don't define. |
| * config/tc-iq2000.h (obj_fix_adjustable): Delete. |
| * config/tc-m32r.h (TC_FIX_ADJUSTABLE): Delete. |
| * config/tc-mt.h (obj_fix_adjustable): Delete. |
| * config/tc-nds32.h (TC_FIX_ADJUSTABLE): Delete. |
| * config/tc-arc.c (parse_opcode_flags): Simplify boolean expression. |
| (relaxable_flag, relaxable_operand, assemble_insn): Likewise. |
| (tokenize_extregister): Likewise. |
| * config/tc-csky.c (parse_opcode, get_operand_value): Likewise. |
| (parse_operands_op, parse_operands, md_assemble): Likewise. |
| * config/tc-d10v.c (build_insn): Likewise. |
| * config/tc-score.c (s3_gen_insn_frag): Likewise. |
| * config/tc-score7.c (s7_gen_insn_frag, s7_relax_frag): Likewise. |
| * config/tc-tic6x.c (tic6x_update_features, md_assemble): Likewise. |
| * config/tc-z80.c (emit_byte): Likewise. |
| |
| 2021-03-29 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-arm.c (struct arm_long_option_table <func>): Return |
| bfd_boolean. |
| * config/tc-arm.h (arm_optimize_expr, arm_data_in_code): Likewise. |
| * config/tc-metag.c (parse_mov_port): Replace unsigned int variable |
| with bfd_boolean. |
| (parse_mmov, parse_mov_ct, parse_alu, parse_shift, parse_bitop), |
| (parse_cmp, parse_fmmov, parse_fmov_data, parse_fearith), |
| (parse_dget_set, parse_dalu): Likewise, ensuring assignment from |
| logical expressions. |
| (struct metag_long_option <func>): Return bfd_boolean. |
| (metag_parse_cpu, metag_parse_fpu, metag_parse_dsp): Likewise. |
| * config/tc-msp430.c (msp430_dstoperand): Correct dummy type. |
| * config/tc-s12z.c (parse_operand_func): Return bfd_boolean. |
| (no_operands, lex_force_match, lex_reg_list): Likewise. |
| (size_from_suffix): Return int. |
| (s12z_relax_frag, md_estimate_size_before_relax): Return 0. |
| * config/tc-s12z.h (tc_s12z_fix_adjustable): Likewise. |
| |
| 2021-03-26 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/x86-64-nosse2.s, |
| testsuite/gas/i386/x86-64-nosse2.l: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2021-03-25 Abid Qadeer <abidh@codesourcery.com> |
| |
| * testsuite/gas/nios2/brn.d: New. |
| * testsuite/gas/nios2/brn.d: New. |
| |
| 2021-03-25 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (match_template): Use t instead of i.tm. |
| |
| 2021-03-25 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/avx512f-nondef.s: Add vgather cases. |
| * testsuite/gas/i386/x86-64-vgather-check.s: Add cases with |
| colliding registers in the upper half of the space. |
| * testsuite/gas/i386/avx512f-nondef.d, |
| testsuite/gas/i386/vgather-check.d, |
| testsuite/gas/i386/x86-64-vgather-check.d, |
| testsuite/gas/i386/x86-64-vgather-check-error.l, |
| testsuite/gas/i386/x86-64-vgather-check-warn.e: Adjust |
| expecations. |
| * testsuite/gas/i386/vgather-check-none.d, |
| testsuite/gas/i386/vgather-check-warn.d, |
| testsuite/gas/i386/x86-64-vgather-check-none.d, |
| testsuite/gas/i386/x86-64-vgather-check-warn.d: Refer to "base" |
| tests for expected dump output. |
| |
| 2021-03-25 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/avx512f-nondef.s: Add case for EVEX.z |
| without mask register. |
| * testsuite/gas/i386/avx512f-nondef.d: Adjust expectations. |
| |
| 2021-03-25 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (md_assemble): Widen set of insns to avoid |
| swapping operands for. |
| * testsuite/gas/i386/invlpgb.s: Fix, re-arrange, and add Intel |
| syntax tests. |
| * testsuite/gas/i386/snp.s: Re-arrange and add multi-operand as |
| well as Intel syntax tests. |
| * testsuite/gas/i386/invlpgb.d, testsuite/gas/i386/snp.d: Adjust |
| expectations. |
| * testsuite/gas/i386/invlpgb64.d, testsuite/gas/i386/snp64.d: |
| Likewise. Drop passing --def-sym to as. |
| |
| 2021-03-25 Jan Beulich <jbeulich@suse.com> |
| |
| PR/gas 27419 |
| * config/tc-i386.c (process_suffix): Restrict (%rip) -> (%eip) |
| conversion to x32 mode. |
| * testsuite/gas/i386/ilp32/enqcmd.s, |
| testsuite/gas/i386/ilp32/enqcmd.d, |
| testsuite/gas/i386/ilp32/movdir.s, |
| testsuite/gas/i386/ilp32/movdir.d: New. |
| * testsuite/gas/i386/x86-64-enqcmd.s, |
| testsuite/gas/i386/x86-64-movdir.s: Drop mismatched operand |
| cases. |
| * testsuite/gas/i386/x86-64-enqcmd-inval.s: Add (%rip) and |
| (%eip) cases. |
| * testsuite/gas/i386/x86-64-movdir64b-reg.s Add (%eip) case. |
| * testsuite/gas/i386/x86-64-enqcmd.d, |
| testsuite/gas/i386/x86-64-enqcmd-intel.d, |
| testsuite/gas/i386/x86-64-enqcmd-inval.l, |
| testsuite/gas/i386/x86-64-movdir.d, |
| testsuite/gas/i386/x86-64-movdir-intel.d, |
| testsuite/gas/i386/x86-64-movdir64b-reg.l: Adjust expectations. |
| |
| 2021-03-25 Alan Modra <amodra@gmail.com> |
| |
| PR 27647 |
| * testsuite/gas/ppc/a2.d: Update expected output. |
| * testsuite/gas/ppc/power8.d: Likewise. |
| |
| 2021-03-24 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (struct _i386_insn): New field |
| opcode_length. |
| (md_begin): Drop assertion. |
| (install_template): New. |
| (build_vex_prefix): Call install_template. |
| (match_template): Likewise. |
| (process_operands): Use new opcode_length field. |
| (output_jump): Likewise. |
| (output_insn): Likewise. Adjust psedo prefix check. |
| |
| 2021-03-24 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (md_begin): Add assertion. |
| (build_vex_prefix): Drop implied prefix calculation. |
| (build_evex_prefix): Likewise. |
| (optimize_encoding): Adjust opcode checks. |
| (load_insn_p): Also check opcodeprefix. |
| (match_template): Also check opcodespace. |
| (process_suffix): Likewise. |
| (process_operands): Likewise. |
| (output_insn): Likewise. Also check isprefix when discaring |
| standalone LOCK. |
| * config/tc-i386-intel.c (i386_intel_operand): Also check |
| opcodespace. |
| |
| 2021-03-24 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (parse_insn): Recognize pseudo prefixes by |
| base_opcode and extension_opcode. |
| |
| 2021-03-23 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (pte): Re-order opc_pfx[] entries. |
| |
| 2021-03-23 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (output_i386_opcode): Invoke |
| process_i386_cpu_flag() slightly later. |
| (process_i386_opcodes): Likewise. |
| |
| 2021-03-23 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (pte): Print prefix and encoding space. |
| (build_vex_prefix): Check opcodespace instead of opcodeprefix. |
| (build_evex_prefix): Likewise. |
| (load_insn_p): Likewise. |
| |
| 2021-03-23 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (load_insn_p): Use PREFIX_NONE. Fold two |
| if()-s. |
| (match_template, output_insn): Use PREFIX_NONE. |
| |
| 2021-03-23 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (i386_index_check): New local variable t. |
| Correct MPX insn check. |
| * config/tc-i386-intel.c (i386_intel_simplify_register): Correct |
| MPX insn check. |
| * testsuite/gas/i386/x86-64-mpx.s: Add RIP-relative cases. Test |
| index scaling by other than 1. |
| * testsuite/gas/i386/x86-64-mpx.d: Adjust expectations. |
| |
| 2021-03-22 Martin Liska <mliska@suse.cz> |
| |
| * config/tc-i386.c (md_parse_option): Replace usage of CONST_STRNEQ with startswith. |
| (x86_64_section_word): Likewise. |
| * config/tc-sparc.c (md_parse_option): Likewise. |
| |
| 2021-03-19 Alan Modra <amodra@gmail.com> |
| |
| * app.c (do_scrub_chars): Don't lose spaces before a slash. |
| |
| 2021-03-18 Christian Groessler <chris@groessler.org> |
| |
| * config/tc-z8k.c (apply_fix): Handle 7-bit relocations correctly. |
| Problem found by Tadashi G. Takaoka <tadashi.g.takaoka@gmail.com>. |
| |
| 2021-03-16 Kuan-Lin Chen <kuanlinchentw@gmail.com> |
| |
| * config/tc-riscv.c (ext_version_table): Add b, zba, zbb and zbc. |
| (riscv_multi_subset_supports): Add INSN_CLASS_ZB*. |
| * testsuite/gas/riscv/b-ext-64.s: Bitmanip test case. |
| * testsuite/gas/riscv/b-ext-64.d: Likewise. |
| * testsuite/gas/riscv/b-ext.s: Likewise. |
| * testsuite/gas/riscv/b-ext.d: Likewise. |
| |
| 2021-03-12 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * testsuite/gas/aarch64/illegal-sysreg-7.d: New test. |
| * testsuite/gas/aarch64/illegal-sysreg-7.l: New test. |
| * testsuite/gas/aarch64/illegal-sysreg-7.s: New test. |
| * testsuite/gas/aarch64/sysreg-7.d: New test. |
| * testsuite/gas/aarch64/sysreg-7.s: New test. |
| |
| 2021-03-12 Clément Chigot <clement.chigot@atos.net> |
| |
| * config/tc-ppc.c (ppc_xcoff_text_section, ppc_xcoff_data_section, |
| (ppc_xcoff_bss_section, ppc_xcoff_tdata_section, |
| (ppc_xcoff_tbss_section): New variables. |
| (ppc_text_subsegment, ppc_text_csects, ppc_data_subgments, |
| (ppc_data_csects): Removed. |
| (ppc_xcoff_section_is_initialized, ppc_init_xcoff_section, |
| ppc_xcoff_parse_cons): New functions. |
| (md_being): Initialize XCOFF sections. |
| (ppc_xcoff_suffix): Add support for TLS relocations |
| (fixup_size, md_apply_fix): Add support for new BFD_RELOC. |
| (ppc_change_csect): Handle XMC_TL, XMC_UL. Correctly, add XMC_BS |
| to .bss section. Handle new XCOFF section variables. |
| (ppc_comm): Likewise. |
| (ppc_toc): Likewise. |
| (ppc_symbol_new_hook): Likewise. |
| (ppc_frob_symbol): Likewise. |
| (ppc_fix_adjustable): Add tbss support. |
| * config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): New define. |
| (ppc_xcoff_parse_cons): Add prototype. |
| (struct ppc_xcoff_section): New structure. |
| |
| 2021-03-12 Clément Chigot <clement.chigot@atos.net> |
| |
| * config/tc-ppc.c (ppc_xcoff_suffix): New function. |
| (MAP, MAP32, MAP64): New macros for XCOFF. |
| (ppc_xcoff_fixup_addis): New function. |
| (ppc_is_toc_sym): Handle XMC_TE. |
| (fixup_size): Add cases for BFD_RELOC_PPC_TOC16_HI and |
| BFD_RELOC_PPC_TOC16_LO. |
| (md_assemble): Call ppc_xcoff_fixup_addis for XCOFF. |
| (ppc_change_csect): Handle XMC_TE. |
| (ppc_tc): Enable .tc symbols to have only a XMC_TC or XMC_TE |
| storage class. |
| (ppc_symbol_new_hook): Handle XMC_TE. |
| (ppc_frob_symbol): Likewise. |
| (ppc_fix_adjustable): Likewise. |
| (md_apply_fix): Handle BFD_RELOC_PPC_TOC16_HI and |
| BFD_RELOC_PPC_TOC16_LO. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/avx512f-intel.d, |
| testsuite/gas/i386/avx512f_vl-intel.d, |
| testsuite/gas/i386/avx512pf-intel.d, |
| testsuite/gas/i386/x86-64-avx512f-intel.d, |
| testsuite/gas/i386/x86-64-avx512f_vl-intel.d, |
| testsuite/gas/i386/x86-64-avx512pf-intel.d: Adjust expectations. |
| |
| 2021-03-10 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/prefetch.d, |
| testsuite/gas/i386/prefetch-intel.d, |
| testsuite/gas/i386/x86-64-prefetch.d, |
| testsuite/gas/i386/x86-64-prefetch-intel.d: Adjust expectations. |
| * testsuite/gas/i386/nops-8.s, testsuite/gas/i386/nops-8.d: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2021-03-09 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (check_hle): Replace HLEPrefix* by Prefix*. |
| (md_assemble): Replace use of repprefixok, islockable, and |
| notrackprefixok. |
| (i386_index_check): Replace use of repprefixok. |
| |
| 2021-03-09 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/noreg64.s: Add sysexit. |
| * testsuite/gas/i386/x86-64-sysenter-amd.s: Split sysexit into |
| sysexitl and sysexitq. |
| * testsuite/gas/i386/noreg-intel64.l, |
| testsuite/gas/i386/noreg64-data16.d, |
| testsuite/gas/i386/noreg64-data16.e, |
| testsuite/gas/i386/noreg64-rex64.d, |
| testsuite/gas/i386/noreg64.d, |
| testsuite/gas/i386/noreg64.l, |
| testsuite/gas/i386/x86-64-sysenter-amd.d, |
| testsuite/gas/i386/x86-64-sysenter-amd.l, |
| testsuite/gas/i386/x86-64-sysenter-intel.d: Adjust expectations. |
| |
| 2021-02-26 Nick Clifton <nickc@redhat.com> |
| |
| PR 27411 |
| * config/tc-arm.c (do_t_add_sub): Correct error message. |
| * testsuite/gas/arm/pr27411.s: New test. |
| * testsuite/gas/arm/pr27411.d: New test driver. |
| * testsuite/gas/arm/pr27411.l: Expected error output for new test. |
| |
| 2021-02-24 Alan Modra <amodra@gmail.com> |
| |
| PR 23691 |
| * Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c.. |
| (TARGET_CPU_HFILES): ..and config/xtensa-relax.h.. |
| (TARGET_EXTRA_FILES): ..to here. Add config/bfin-lex-wrapper.c, |
| and use alongside TARGET_CPU_CFILES. |
| (EXTRA_DIST): Update location of generated .c files. |
| (config/m68k-parse.c): New rule replacing m68k-parse.c rule. |
| (config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c), |
| (config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly. |
| (itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed |
| dependencies. |
| (itbl-parse.@OBJEXT@): Delete rule using NO_WERROR. |
| (itbl-parse.c, itbl-parse.h): Tidy. |
| * config/bfin-lex-wrapper.c: Include config/bfin-lex.c. |
| * config/bfin-lex.l: Include config/bfin-parse.h. |
| * configure.ac (extra_objects): Move object files corresponding |
| to .y and .l files now in config/ to config/. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2021-02-19 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-riscv.c (riscv_ip): Fix compile time warnings about |
| misleading indentation. |
| |
| 2021-02-19 Nelson Chu <nelson.chu@sifive.com> |
| |
| PR 27158 |
| * config/tc-riscv.c (riscv_ip): Updated encoding macros. |
| (md_apply_fix): Likewise. |
| (md_convert_frag_branch): Likewise. |
| (validate_riscv_insn): Likewise. Also arranged operands, including |
| added C5 and C6 operands, and removed unused Ci and C< operands. |
| * doc/c-riscv.texi: Updated and added CSS/CL/CS types. |
| * testsuite/gas/riscv/insn.d: Added CSS/CL/CS instructions. |
| * testsuite/gas/riscv/insn.s: Likewise. |
| |
| 2021-02-18 Nelson Chu <nelson.chu@sifive.com> |
| |
| * config/tc-riscv.c: Included cpu-riscv.h. |
| (enum riscv_csr_clas): Moved from include/opcode/riscv.h. |
| (struct riscv_csr_extra): Likewise. |
| (struct riscv_ext_version): Likewise. |
| (ext_version_table): Moved from opcodes/riscv-opc.c. |
| (default_isa_spec): Updated type to riscv_spec_class. |
| (default_priv_spec): Likewise. |
| (riscv_set_default_isa_spec): Updated. |
| (init_ext_version_hash): Likewise. |
| (riscv_init_csr_hash): Likewise, also fixed indent. |
| |
| 2021-02-17 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/elf/section28.d: xfail h8300. |
| |
| 2021-02-16 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/27412 |
| * config/obj-elf.c (obj_elf_change_section): Strip SHF_GNU_RETAIN |
| when checking incorrect section attributes. |
| * testsuite/gas/elf/elf.exp: Run section28 and section29. |
| * testsuite/gas/elf/section28.d: New file. |
| * testsuite/gas/elf/section28.s: Likewise. |
| * testsuite/gas/elf/section29.d: Likewise. |
| * testsuite/gas/elf/section29.s: Likewise. |
| |
| 2021-02-16 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/sse-check.s, |
| testsuite/gas/i386/sse2avx.s, |
| testsuite/gas/i386/x86-64-sse2avx.s: Add CVTPI2PD cases. |
| * testsuite/gas/i386/sse-check-error.l, |
| testsuite/gas/i386/sse-check-warn.e, |
| testsuite/gas/i386/sse-check.d, |
| testsuite/gas/i386/sse2avx.d, |
| testsuite/gas/i386/x86-64-sse-check-error.l, |
| testsuite/gas/i386/x86-64-sse2avx.d: Adjust expecations. |
| * testsuite/gas/i386/property-cvtpi2pd.s, |
| testsuite/gas/i386/property-cvtpi2pd.d, |
| testsuite/gas/i386/property-cvtpi2ps.s, |
| testsuite/gas/i386/property-cvtpi2ps.d: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2021-02-16 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (md_assemble): Use template rather than |
| actuals when updating i.xstate. |
| * testsuite/gas/i386/property-4.d, |
| testsuite/gas/i386/property-5.d, |
| testsuite/gas/i386/property-12.d: Adjust expectations. |
| |
| 2021-02-16 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (output_insn): Handle ldmxcsr, stmxcsr, |
| vldmxcsr, vstmxcsr, vzeroall, and vzeroupper. |
| * testsuite/gas/i386/property-ldmxcsr.s, |
| testsuite/gas/i386/property-ldmxcsr.d, |
| testsuite/gas/i386/property-vldmxcsr.s, |
| testsuite/gas/i386/property-vldmxcsr.d, |
| testsuite/gas/i386/property-vzeroall.s, |
| testsuite/gas/i386/property-vzeroall.d: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2021-02-16 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/i386.exp: Move bitness-independent property |
| tests to bitness independent section. |
| * testsuite/gas/i386/x86-64-property-2.d, |
| testsuite/gas/i386/x86-64-property-3.d, |
| testsuite/gas/i386/x86-64-property-4.d, |
| testsuite/gas/i386/x86-64-property-5.d, |
| testsuite/gas/i386/x86-64-property-6.d, |
| testsuite/gas/i386/x86-64-property-10.d, |
| testsuite/gas/i386/x86-64-property-11.d, |
| testsuite/gas/i386/x86-64-property-12.d, |
| testsuite/gas/i386/x86-64-property-13.d: Delete. |
| |
| 2021-02-16 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/enqcmd-16bit.s: Include enqcmd.s, not |
| movdir.s. |
| * testsuite/gas/i386/enqcmd-16bit.d: Adjust expectations. |
| |
| 2021-02-16 Alan Modra <amodra@gmail.com> |
| |
| PR 27426 |
| * dwarf2dbg.c (allocate_filename_to_slot): Allocate the dirs array |
| in another place. |
| |
| 2021-02-16 Alan Modra <amodra@gmail.com> |
| |
| * read.c (demand_copy_C_string): Really check for embedded zeros. |
| |
| 2021-02-15 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * config/tc-s390.c (s390_parse_cpu): New entry for arch14. |
| * doc/c-s390.texi: Document arch14 march option. |
| * testsuite/gas/s390/s390.exp: Run the arch14 related tests. |
| * testsuite/gas/s390/zarch-arch14.d: New test. |
| * testsuite/gas/s390/zarch-arch14.s: New test. |
| |
| 2021-02-12 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link |
| following. |
| * testsuite/gas/xgate/insns-dwarf2.d: Likewise. |
| |
| 2021-02-12 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/all/pr27381.err: Don't match source file name. |
| * testsuite/gas/all/pr27381.s: Don't start directive in first column. |
| * testsuite/gas/all/pr27384.err: Don't match source file name. |
| Adjust line number. |
| * testsuite/gas/all/pr27384.s: Add ".text" directive. |
| * testsuite/gas/elf/pr27355.err: Don't match source file name. |
| |
| 2021-02-11 Alan Modra <amodra@gmail.com> |
| |
| * NEWS: Mention arm-symbianelf removal. |
| |
| 2021-02-10 Nick Clifton <nickc@redhat.com> |
| |
| * listing.c (buffer_line): Remove debugging code accidentally |
| included with the fix for PR 27384. |
| |
| 2021-02-09 Nick Clifton <nickc@redhat.com> |
| |
| PR 27381 |
| * read.c (s_incbin): Check that the file to be included is a |
| regular, non-directory file. |
| * testsuite/gas/all/pr27381.s: New test source file. |
| * testsuite/gas/all/pr27381.d: New test control file. |
| * testsuite/gas/all/pr27381.err: Expected error output for the new test. |
| * testsuite/gas/all/gas.exp: Run the new test. |
| |
| 2021-02-09 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. |
| * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN |
| support. |
| * config/te-symbian.h: Delete. |
| * configure.tgt: Remove arm-*-symbianelf*. |
| * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in |
| target selection. |
| * testsuite/gas/arm/arch4t.d: Likewise. |
| * testsuite/gas/arm/got_prel.d: Likewise. |
| * testsuite/gas/arm/mapdir.d: Likewise. |
| * testsuite/gas/arm/mapmisc.d: Likewise. |
| * testsuite/gas/arm/mapsecs.d: Likewise. |
| * testsuite/gas/arm/mapshort-eabi.d: Likewise. |
| * testsuite/gas/arm/thumb-eabi.d: Likewise. |
| * testsuite/gas/arm/thumb.d: Likewise. |
| * testsuite/gas/arm/thumbrel.d: Likewise. |
| * Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2021-02-09 Nick Clifton <nickc@redhat.com> |
| |
| PR 27384 |
| * listing.c (listing_psize): Check the result of the width |
| expression before assigning it to paper_width. |
| * testsuite/gas/all/pr27384.s: New test source file. |
| * testsuite/gas/all/pr27384.d: New test control file. |
| * testsuite/gas/all/pr27384.err: Expected errors from new test. |
| * testsuite/gas/all/gas.exp: Run the new test. |
| |
| 2021-02-09 Nick Clifton <nickc@redhat.com> |
| |
| PR 27355 |
| * testsuite/gas/elf/pr27355.s: New test source file. |
| * testsuite/gas/elf/pr27355.d: New test control file. |
| * testsuite/gas/elf/pr27355.err: Expected errors from new test. |
| * testsuite/gas/elf/elf.exp: Run the new test. |
| |
| 2021-02-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/tc-tic54x (tic54x_mmregs): Rename to ... |
| (tic54x_register_mmregs): ... this. Change mmregs to tic54x_mmregs. |
| (md_pseudo_table): Change tic54x_mmregs to tic54x_register_mmregs. |
| (md_begin): Add tic54x_ prefix to regs, mmregs, condition_codes, |
| cc2_codes, cc3_codes, status_bits, and misc_symbols. |
| |
| 2021-02-08 Nick Clifton <nickc@redhat.com> |
| |
| PR 27355 |
| * dwarf2dbg.c (allocate_filename_to_slot): Allocate the dirs array |
| if it has not already been created. |
| |
| 2021-02-04 Nelson Chu <nelson.chu@sifive.com> |
| |
| * config/tc-riscv.c (riscv_multi_subset_supports): Removed |
| INSN_CLASS_ZB*. |
| * testsuite/gas/riscv/bitmanip-insns-32.d: Removed. |
| * testsuite/gas/riscv/bitmanip-insns-64.d: Removed. |
| * testsuite/gas/riscv/bitmanip-insns.s: Removed. |
| |
| 2021-02-03 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * doc/c-s390.texi: Document vector instruction formats. |
| |
| 2021-02-01 Emery Hemingway <ehmry@posteo.net> |
| |
| * configure.tgt: Add *-*-genode* as a target for AArch64 and x86. |
| |
| 2021-02-01 Alan Modra <amodra@gmail.com> |
| |
| PR 27283 |
| * config/tc-alpha.c (insert_operand): Delete dead code. |
| |
| 2021-01-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/27243 |
| * config/tc-nios2.c (md_begin): Don't disable relaxation with |
| --gdwarf-N. |
| * testsuite/gas/nios2/relax.d: New file. |
| * testsuite/gas/nios2/relax.s: Likewise. |
| |
| 2021-01-26 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/all/local-label-overflow.d: Use xfail rather than |
| notarget all except hppa. Comment. |
| * testsuite/gas/all/sleb128-2.d: Use xfail rather than notarget. |
| * testsuite/gas/all/sleb128-4.d: Likewise. Don't skip msp430. |
| * testsuite/gas/all/sleb128-5.d: Use xfail rather than notarget. |
| * testsuite/gas/all/sleb128-7.d: Likewise. |
| * testsuite/gas/all/sleb128-9.d: Likewise. |
| * testsuite/gas/elf/bignums.d: Likewise. |
| * testsuite/gas/elf/group0c.d: Likewise. |
| * testsuite/gas/elf/group1a.d: Likewise. |
| * testsuite/gas/elf/section-symbol-redef.d: Likewise. |
| * testsuite/gas/elf/section15.d: Likewise. |
| * testsuite/gas/elf/section4.d: Likewise. |
| * testsuite/gas/elf/section7.d: Likewise. |
| * testsuite/gas/macros/irp.d: Likewise. |
| * testsuite/gas/macros/repeat.d: Likewise. |
| * testsuite/gas/macros/rept.d: Likewise. |
| * testsuite/gas/macros/test2.d: Likewise. |
| * testsuite/gas/macros/vararg.d: Likewise. |
| * testsuite/gas/all/string.d: Use xfail rather than skip. |
| * testsuite/gas/elf/missing-build-notes.d: Likewise. |
| * testsuite/gas/elf/section0.d: Likewise. |
| * testsuite/gas/elf/section1.d: Likewise. |
| * testsuite/gas/elf/section10.d: Likewise. |
| * testsuite/gas/elf/section11.d: Likewise. |
| * testsuite/gas/elf/section6.d: Likewise. |
| * testsuite/gas/elf/symtab.d: Use xfail rather than skip, adjust hppa. |
| * testsuite/gas/elf/symtab.s: Don't start directives in first column. |
| * testsuite/gas/macros/test3.d: Don't notarget nds32. |
| |
| 2021-01-26 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/all/byte.d, |
| * testsuite/gas/all/byte.l, |
| * testsuite/gas/all/byte.s: Delete. |
| * testsuite/gas/all/gas.exp: Don't run byte test. |
| |
| 2021-01-26 Alan Modra <amodra@gmail.com> |
| |
| PR 27282 |
| * testsuite/gas/all/none.d: Replace skip with xfail, don't xfail ft32. |
| * testsuite/gas/elf/pr27228.d: xfail hppa and allow OBJECT match. |
| |
| 2021-01-24 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/27228 |
| * testsuite/gas/elf/elf.exp: Run pr27228. |
| * testsuite/gas/elf/pr27228.d: New file. |
| * testsuite/gas/elf/pr27228.s: Likewise. |
| |
| 2021-01-24 Alan Modra <amodra@gmail.com> |
| |
| PR 27228 |
| * write.c (resolve_reloc_expr_symbols): Don't assume local symbol |
| is defined. |
| |
| 2021-01-21 Alan Modra <amodra@gmail.com> |
| |
| PR 27221 |
| * dwarf2dbg.c (dwarf2_gen_line_info_1): Don't warn about ignored |
| line number info when gas is generating it. |
| * testsuite/gas/elf/dwarf2-20.d: Adjust to not expect warnings. |
| * testsuite/gas/m68hc11/indexed12.d: Likewise. |
| * testsuite/gas/elf/elf.exp: Don't run warn-2. |
| * gas/testsuite/gas/elf/warn-2.s: Delete. |
| |
| 2021-01-21 Alan Modra <amodra@gmail.com> |
| |
| PR 27218 |
| * dwarf2dbg.c (dwarf2_gen_line_info): Correct setting of dwarf_level. |
| (dwarf2_directive_filename, dwarf2_directive_loc): Likewise, and |
| error for negative file numbers. |
| |
| 2021-01-20 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/ppc/power4.d: Adjust for removal of section sym. |
| * testsuite/gas/ppc/test1elf32.d: Likewise. |
| * testsuite/gas/ppc/test1elf64.d: Likewise. |
| |
| 2021-01-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/27195 |
| * dwarf2dbg.c (dwarf2_gen_line_info): Set dwarf_level to 5 if |
| needed. |
| (dwarf2_directive_filename): Likewise. |
| (dwarf2_directive_loc): Likewise. |
| * testsuite/gas/elf/dwarf-5-file0.d: Pass --gdwarf-3. |
| * testsuite/gas/lns/lns-diag-1.l: Remove the |
| "Error: file number less than one" errors. |
| |
| 2021-01-18 Alan Modra <amodra@gmail.com> |
| |
| PR 27198 |
| * config/tc-i386.c (need_plt32_p): Return FALSE for NULL symbol. |
| * testsuite/gas/i386/pr27198.d, |
| * gas/testsuite/gas/i386/pr27198.err, |
| * gas/testsuite/gas/i386/pr27198.s: New test. |
| * gas/testsuite/gas/i386/i386.exp: Run it. |
| |
| 2021-01-15 Nelson Chu <nelson.chu@sifive.com> |
| |
| * config/tc-riscv.c: Indent and GNU coding standards tidy, |
| also aligned the code. |
| * config/tc-riscv.h: Likewise. |
| |
| 2021-01-15 Nelson Chu <nelson.chu@sifive.com> |
| |
| * config/tc-riscv.c: Error and warning messages tidy. |
| * testsuite/gas/riscv/priv-reg-fail-fext.l: Updated. |
| * testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise. |
| * testsuite/gas/riscv/priv-reg-fail-read-only-02.l: Likewise. |
| * testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise. |
| * testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise. |
| * testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise. |
| * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise. |
| |
| 2021-01-15 Nelson Chu <nelson.chu@sifive.com> |
| |
| * config/tc-riscv.c: Comments tidy and improvement. Also update |
| comment "fallthru" to "Fall through" that end with a period and |
| two spaces. |
| |
| 2021-01-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * doc/as.texi: Delete @ifset ELF wrapping around [248]byte entries. |
| Delete warning that these are only available with ELF targets. |
| * obj-elf.c (elf_pseudo_table): Move 2byte/4byte/8byte entries ... |
| * read.c (potable): ... here. |
| |
| 2021-01-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.am (bfin-lex-wrapper.@OBJEXT@): Delete $(NO_WERROR). |
| * Makefile.in: Regenerated. |
| |
| 2021-01-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-lex.l (YY_NO_INPUT, YY_NO_UNPUT): Define. |
| (parse_int): Mark char_bag const. |
| |
| 2021-01-13 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/27178 |
| * config/tc-i386.c (lex_got::gotrel): Add need_GOT_symbol. |
| Don't generate GOT_symbol for PLT relocations. |
| * testsuite/gas/i386/i386.exp: Run PR gas/27178 tests. |
| * testsuite/gas/i386/no-got.d: New file. |
| * testsuite/gas/i386/no-got.s: Likewise. |
| * testsuite/gas/i386/x86-64-no-got.d: Likewise. |
| * testsuite/gas/i386/x86-64-no-got.s: Likewise. |
| |
| 2021-01-13 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.in: Regenerate. |
| * Makefile.in: Regenerate. |
| |
| 2021-01-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/26792 |
| * configure.ac: Use GNU_MAKE_JOBSERVER. |
| * aclocal.m4: Regenerated. |
| * configure: Likewise. |
| |
| 2021-01-12 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po: Updated French translation. |
| |
| 2021-01-11 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/27173 |
| * configure: Regenerated. |
| |
| 2021-10-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * NEWS: Remove CSRE. |
| * config/tc-aarch64.c (parse_csr_operand): Delete. |
| (parse_operands): Delete handling of |
| AARCH64_OPND_CSRE_CSR. |
| (aarch64_features): Remove csre. |
| * doc/c-aarch64.texi: Remove CSRE. |
| * testsuite/gas/aarch64/csre.d: Delete. |
| * testsuite/gas/aarch64/csre-invalid.s: Likewise. |
| * testsuite/gas/aarch64/csre-invalid.d: Likewise. |
| * testsuite/gas/aarch64/csre_csr.s: Likewise. |
| * testsuite/gas/aarch64/csre_csr.d: Likewise. |
| * testsuite/gas/aarch64/csre_csr-invalid.s: Likewise. |
| * testsuite/gas/aarch64/csre_csr-invalid.l: Likewise. |
| * testsuite/gas/aarch64/csre_csr-invalid.d: Likewise. |
| |
| 2021-01-11 Nick Clifton <nickc@redhat.com> |
| |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2021-01-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure: Regenerated. |
| |
| 2021-01-09 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/gas.pot: Regenerate. |
| |
| 2021-01-09 Nick Clifton <nickc@redhat.com> |
| |
| * 2.36 release branch crated. |
| |
| 2021-01-08 Peter Bergner <bergner@linux.ibm.com> |
| |
| * testsuite/gas/ppc/rop-checks.d, |
| * testsuite/gas/ppc/rop-checks.l, |
| * testsuite/gas/ppc/rop-checks.s, |
| * testsuite/gas/ppc/rop.d, |
| * testsuite/gas/ppc/rop.s: New tests. |
| * testsuite/gas/ppc/ppc.exp: Run them. |
| |
| 2021-01-09 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2021-01-07 Samuel Thibault <samuel.thibault@gnu.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-07 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR 27109 |
| * read.c (s_reloc): Call symbol_mark_used_in_reloc on the |
| section symbol. |
| * subsegs.c (subseg_set_rest): Set BSF_SECTION_SYM_USED if needed. |
| * write.c (adjust_reloc_syms): Call symbol_mark_used_in_reloc |
| on the section symbol. |
| (set_symtab): Don't generate unused section symbols. |
| (maybe_generate_build_notes): Call symbol_mark_used_in_reloc |
| on the section symbol. |
| * config/obj-elf.c (elf_adjust_symtab): Call |
| symbol_mark_used_in_reloc on the group signature symbol. |
| * testsuite/gas/cfi/cfi-label.d: Remove unused section symbols |
| from expected output. |
| * testsuite/gas/elf/elf.exp (run_elf_list_test): Check |
| is_elf_unused_section_symbols. |
| * testsuite/gas/elf/section2.e: Updated. |
| * testsuite/gas/elf/section2.e-unused: New file. |
| * testsuite/gas/elf/symver.d: Remove unused section symbols. |
| * testsuite/gas/i386/ilp32/elf/symver.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-size-1.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-size-3.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-size-5.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-unwind.d: Likewise. |
| * testsuite/gas/i386/size-1.d: Likewise. |
| * testsuite/gas/i386/size-3.d: Likewise. |
| * testsuite/gas/i386/svr4.d: Likewise. |
| * testsuite/gas/i386/x86-64-size-1.d: Likewise. |
| * testsuite/gas/i386/x86-64-size-3.d: Likewise. |
| * testsuite/gas/i386/x86-64-size-5.d: Likewise. |
| * testsuite/gas/i386/x86-64-unwind.d: Likewise. |
| |
| 2021-01-07 Philipp Tomsich <prt@gnu.org> |
| |
| * config/tc-riscv.c (riscv_multi_subset_supports): Added |
| INSN_CLASS_ZIHINTPAUSE. |
| * testsuite/gas/riscv/pause.d: New testcase. Adding coverage for |
| the pause hint instruction. |
| * testsuite/gas/riscv/pause.s: Likewise. |
| |
| 2021-01-07 Claire Xenia Wolf <claire@symbioticeda.com> |
| Jim Wilson <jimw@sifive.com> |
| Andrew Waterman <andrew@sifive.com> |
| Maxim Blinov <maxim.blinov@embecosm.com> |
| Kito Cheng <kito.cheng@sifive.com> |
| Nelson Chu <nelson.chu@sifive.com> |
| |
| * config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZB*. |
| (riscv_get_default_ext_version): Do not check the default_isa_spec when |
| the version defined in the riscv_opcodes table is ISA_SPEC_CLASS_DRAFT. |
| * testsuite/gas/riscv/bitmanip-insns-32.d: New testcase. |
| * testsuite/gas/riscv/bitmanip-insns-64.d: Likewise. |
| * testsuite/gas/riscv/bitmanip-insns.s: Likewise. |
| |
| 2021-01-06 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/sparc/sparc.exp: Move 64-bit tests inside gas_64_check. |
| |
| 2021-01-06 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/macros/app1.d: xfail tic30. |
| * testsuite/gas/macros/app2.d: Likewise. |
| * testsuite/gas/macros/app3.d: Likewise. |
| * testsuite/gas/macros/app4.d: Likewise. |
| |
| 2021-01-06 Marcus Comstedt <marcus@mc.pp.se> |
| |
| * doc/as.texi: Add -mlittle-endian and -mbig-endian to docs. |
| * doc/c-riscv.texi: Likewise. |
| |
| 2021-01-06 Marcus Comstedt <marcus@mc.pp.se> |
| |
| * testsuite/gas/riscv/li32.d: Accept bigriscv in addition |
| to littleriscv. |
| * testsuite/gas/riscv/li64.d: Likewise. |
| * testsuite/gas/riscv/lla32.d: Likewise. |
| * testsuite/gas/riscv/lla64.d: Likewise. |
| * testsuite/gas/riscv/march-ok-g2.d: Likewise. |
| * testsuite/gas/riscv/march-ok-g2_p1.d: Likewise. |
| * testsuite/gas/riscv/march-ok-g2p0.d: Likewise. |
| * testsuite/gas/riscv/march-ok-i2p0.d: Likewise. |
| * testsuite/gas/riscv/march-ok-i2p0m2_a2f2.d: Likewise. |
| * testsuite/gas/riscv/march-ok-nse-with-version.d: Likewise. |
| * testsuite/gas/riscv/march-ok-two-nse.d: Likewise. |
| |
| 2021-01-06 Marcus Comstedt <marcus@mc.pp.se> |
| |
| * config/tc-riscv.c (riscv_target_format): Add elf64-bigriscv and |
| elf32-bigriscv. |
| (install_insn): Always write instructions as little endian. |
| (riscv_make_nops): Likewise. |
| (md_convert_frag_branch): Likewise. |
| (md_number_to_chars): Write data in target endianness. |
| (options, md_longopts): Add -mbig-endian and -mlittle-endian options. |
| (md_parse_option): Handle the endian options. |
| * config/tc-riscv.h: Only define TARGET_BYTES_BIG_ENDIAN if not |
| already defined. |
| * configure.tgt: Added riscv64be*, riscv32be*, riscvbe*. |
| |
| 2021-01-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/26256 |
| * config/obj-elf.c (obj_elf_change_section): Also filter out |
| SHF_LINK_ORDER. |
| |
| 2021-01-04 Alan Modra <amodra@gmail.com> |
| |
| PR 27102 |
| * symbols.c (S_SET_EXTERNAL): Revise section symbol warning |
| message and register symbol error message. |
| |
| 2021-01-04 Alan Modra <amodra@gmail.com> |
| |
| PR 27101 |
| * read.c (s_align): Use a large enough type for "align" to hold |
| the result of get_absolute_expression. |
| |
| 2021-01-01 Nicolas Boulenguez <nicolas@debian.org> |
| |
| * config/tc-i386.c: Correct comment spelling. |
| * config/tc-riscv.c: Likewise. |
| * config/tc-s390.c: Correct comment grammar. |
| * doc/c-i386.texi: Correct spelling. |
| * doc/c-s390.texi: Correct grammar. |
| |
| 2021-01-01 Alan Modra <amodra@gmail.com> |
| |
| Update year range in copyright notice of all files. |
| |
| 2021-01-01 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * config/tc-mmix.h (md_single_noop_insn): Change to "swym 0". |
| |
| For older changes see ChangeLog-2020 |
| |
| Copyright (C) 2021-2024 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |