| 2019-12-30 Alan Modra <amodra@gmail.com> |
| |
| PR 25319 |
| * tic4x-dis.c (tic4x_print_cond): Correct order of xcalloc args. |
| |
| 2019-12-29 Alan Modra <amodra@gmail.com> |
| |
| * sparc-dis.c (SEX): Don't use left and right shift to sign extend. |
| (compare_opcodes): Avoid signed shift left overflow. |
| (print_insn_sparc): Likewise. |
| |
| 2019-12-29 Alan Modra <amodra@gmail.com> |
| |
| PR 25319 |
| * tic4x-dis.c (tic4x_print_cond): Init all of condtable. |
| |
| 2019-12-27 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (Jdqw): Define. |
| (dqw_mode): Adjust associated comment. |
| (rm_table): Use Jdqw for XBEGIN. |
| (OP_J): Handle dqw_mode. |
| |
| 2019-12-27 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (process_i386_operand_type): Don't set Disp32 for |
| Cpu64 templates. |
| * i386-opc.tbl (mov): Fold two templates. |
| (jcxz, jecxz, jrcxz, loop, loope, loopne, loopnz, loopz): Drop |
| Disp16, Disp32, and Disp32S. |
| (xbegin): Add Disp32S. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-12-26 Alan Modra <amodra@gmail.com> |
| |
| * crx-dis.c (get_number_of_operands): Don't access operands[] |
| out of bounds. |
| |
| 2019-12-26 Alan Modra <amodra@gmail.com> |
| |
| * v850-dis.c (disassemble): Avoid signed overflow. Don't use |
| long vars when unsigned int will do. |
| |
| 2019-12-24 Alan Modra <amodra@gmail.com> |
| |
| * arm-dis.c (print_insn_arm): Don't shift by 32 on unsigned int var. |
| |
| 2019-12-23 Jan Beulich <jbeulich@suse.com> |
| |
| * ppc-dis.c (print_insn_powerpc): Rename local variable "spaces" |
| to "blanks". |
| * ppc-opc.c (D34, SI34, NSI34): Use UINT64_C(). |
| |
| 2019-12-23 Alan Modra <amodra@gmail.com> |
| |
| * score-dis.c (print_insn_score32): Avoid signed overflow. |
| (print_insn_score48): Likewise. Don't cast to int when printing |
| hex values. |
| |
| 2019-12-23 Alan Modra <amodra@gmail.com> |
| |
| * iq2000-ibld.c: Regenerate. |
| |
| 2019-12-23 Alan Modra <amodra@gmail.com> |
| |
| * d30v-dis.c (extract_value): Make num param a uint64_t, constify |
| oper. Use unsigned vars. |
| (print_insn): Make num var uint64_t. Constify oper and remove now |
| unnecessary casts on extract_value calls. |
| (print_insn_d30v): Use unsigned vars. Adjust printf formats. |
| |
| 2019-12-23 Alan Modra <amodra@gmail.com> |
| |
| * wasm32-dis.c (wasm_read_leb128): Don't allow oversize shifts. |
| Catch value overflow. Sign extend only on terminating byte. |
| |
| 2019-12-20 Alan Modra <amodra@gmail.com> |
| |
| PR 25281 |
| * sh-dis.c (print_insn_ddt): Properly check validity of MOVX_NOPY |
| and MOVY_NOPX insns. For invalid cases include 0xf000 in the word |
| printed. Print .word in more cases. |
| |
| 2019-12-20 Alan Modra <amodra@gmail.com> |
| |
| * or1k-ibld.c: Regenerate. |
| |
| 2019-12-20 Alan Modra <amodra@gmail.com> |
| |
| * hppa-dis.c (extract_16, extract_21, print_insn_hppa): Use |
| unsigned variables. |
| |
| 2019-12-20 Alan Modra <amodra@gmail.com> |
| |
| * m68hc11-dis.c (read_memory): Delete forward decls. |
| (print_indexed_operand, print_insn): Likewise. |
| (print_indexed_operand): Formatting. Don't rely on short being |
| exactly 16 bits, make sign extension explicit. |
| (print_insn): Likewise. Avoid signed overflow. |
| |
| 2019-12-19 Alan Modra <amodra@gmail.com> |
| |
| * vax-dis.c (print_insn_mode): Stop index mode recursion. |
| |
| 2019-12-19 Dr N.W. Filardo <nwf20@cam.ac.uk> |
| |
| PR 25277 |
| * microblaze-opcm.h (enum microblaze_instr): Prefix fadd, fmul and |
| fdiv with "mbi_". |
| * microblaze-opc.h (opcodes): Adjust to suit. |
| |
| 2019-12-18 Alan Modra <amodra@gmail.com> |
| |
| * alpha-opc.c (OP): Avoid signed overflow. |
| * arm-dis.c (print_insn): Likewise. |
| * mcore-dis.c (print_insn_mcore): Likewise. |
| * pj-dis.c (get_int): Likewise. |
| * ppc-opc.c (EBD15, EBD15BI): Likewise. |
| * score7-dis.c (s7_print_insn): Likewise. |
| * tic30-dis.c (print_insn_tic30): Likewise. |
| * v850-opc.c (insert_SELID): Likewise. |
| * vax-dis.c (print_insn_vax): Likewise. |
| * arc-ext.c (create_map): Likewise. |
| (struct ExtAuxRegister): Make "address" field unsigned int. |
| (arcExtMap_auxRegName): Pass unsigned address. |
| (dump_ARC_extmap): Adjust. |
| * arc-ext.h (arcExtMap_auxRegName): Update prototype. |
| |
| 2019-12-17 Alan Modra <amodra@gmail.com> |
| |
| * visium-dis.c (print_insn_visium): Avoid signed overflow. |
| |
| 2019-12-17 Alan Modra <amodra@gmail.com> |
| |
| * aarch64-opc.c (value_fit_signed_field_p): Avoid signed overflow. |
| (value_fit_unsigned_field_p): Likewise. |
| (aarch64_wide_constant_p): Likewise. |
| (operand_general_constraint_met_p): Likewise. |
| * aarch64-opc.h (aarch64_wide_constant_p): Update prototype. |
| |
| 2019-12-17 Alan Modra <amodra@gmail.com> |
| |
| * nds32-dis.c (nds32_mask_opcode): Avoid signed overflow. |
| (print_insn_nds32): Use uint64_t for "given" and "given1". |
| |
| 2019-12-17 Alan Modra <amodra@gmail.com> |
| |
| * tic80-dis.c: Delete file. |
| * tic80-opc.c: Delete file. |
| * disassemble.c: Remove tic80 support. |
| * disassemble.h: Likewise. |
| * Makefile.am: Likewise. |
| * configure.ac: Likewise. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2019-12-17 Alan Modra <amodra@gmail.com> |
| |
| * bpf-ibld.c: Regenerate. |
| |
| 2019-12-16 Alan Modra <amodra@gmail.com> |
| |
| * aarch64-dis.c (sign_extend): Return uint64_t. Rewrite without |
| conditional. |
| (aarch64_ext_imm): Avoid signed overflow. |
| |
| 2019-12-16 Alan Modra <amodra@gmail.com> |
| |
| * microblaze-dis.c (read_insn_microblaze): Avoid signed overflow. |
| |
| 2019-12-16 Alan Modra <amodra@gmail.com> |
| |
| * nios2-dis.c (nios2_print_insn_arg): Avoid signed overflow |
| |
| 2019-12-16 Alan Modra <amodra@gmail.com> |
| |
| * xstormy16-ibld.c: Regenerate. |
| |
| 2019-12-16 Alan Modra <amodra@gmail.com> |
| |
| * score-dis.c (print_insn_score16): Move rpush/rpop imm field |
| value adjustment so that it doesn't affect reg field too. |
| |
| 2019-12-16 Alan Modra <amodra@gmail.com> |
| |
| * crx-dis.c (EXTRACT, SBM): Avoid signed overflow. |
| (get_number_of_operands, getargtype, getbits, getregname), |
| (getcopregname, getprocregname, gettrapstring, getcinvstring), |
| (getregliststring, get_word_at_PC, get_words_at_PC, build_mask), |
| (powerof2, match_opcode, make_instruction, print_arguments), |
| (print_arg): Delete forward declarations, moving static to.. |
| (getregname, getcopregname, getregliststring): ..these definitions. |
| (build_mask): Return unsigned int mask. |
| (match_opcode): Use unsigned int vars. |
| |
| 2019-12-16 Alan Modra <amodra@gmail.com> |
| |
| * bfin-dis.c (fmtconst, fmtconst_val): Avoid signed overflow. |
| |
| 2019-12-16 Alan Modra <amodra@gmail.com> |
| |
| * nds32-dis.c (print_insn16, print_insn32): Remove forward decls. |
| (struct objdump_disasm_info): Delete. |
| (nds32_parse_audio_ext, nds32_parse_opcode): Cast result of |
| N32_IMMS to unsigned before shifting left. |
| |
| 2019-12-16 Alan Modra <amodra@gmail.com> |
| |
| * moxie-dis.c (INST2OFFSET): Don't left shift a signed value. |
| (print_insn_moxie): Remove unnecessary cast. |
| |
| 2019-12-12 Alan Modra <amodra@gmail.com> |
| |
| * csky-dis.c (csky_chars_to_number): Remove abort and unnecessary |
| mask. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * arc-dis.c (BITS): Don't truncate high bits with shifts. |
| * nios2-dis.c (nios2_print_insn_arg): Don't sign extend with shifts. |
| * tic54x-dis.c (print_instruction): Likewise. |
| * tilegx-opc.c (parse_insn_tilegx): Likewise. |
| * tilepro-opc.c (parse_insn_tilepro): Likewise. |
| * visium-dis.c (disassem_class0): Likewise. |
| * pdp11-dis.c (sign_extend): Likewise. |
| (SIGN_BITS): Delete. |
| * epiphany-ibld.c: Regenerate. |
| * lm32-ibld.c: Regenerate. |
| * m32c-ibld.c: Regenerate. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * ns32k-dis.c (sign_extend): Correct last patch. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * vax-dis.c (NEXTLONG): Avoid signed overflow. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * v850-dis.c (get_operand_value): Use unsigned arithmetic. Don't |
| sign extend using shifts. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * tic6x-dis.c (tic6x_extract_32): Avoid signed overflow. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * tic4x-dis.c (tic4x_print_register): Formatting. Don't segfault |
| on NULL registertable entry. |
| (tic4x_hash_opcode): Use unsigned arithmetic. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * s12z-opc.c (z_decode_signed_value): Avoid signed overflow. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * ns32k-dis.c (bit_extract): Use unsigned arithmetic. |
| (bit_extract_simple, sign_extend): Likewise. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * nios2-dis.c (nios2_print_insn_arg): Use 1u << 31. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * moxie-dis.c (INST2OFFSET): Don't sign extend using shifts. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * m68k-dis.c (COERCE32): Cast value first. |
| (NEXTLONG, NEXTULONG): Avoid signed overflow. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * h8300-dis.c (extract_immediate): Avoid signed overflow. |
| (bfd_h8_disassemble): Likewise. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * d30v-dis.c (print_insn): Make opind unsigned. Don't access |
| past end of operands array. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * csky-dis.c (csky_chars_to_number): Rewrite. Avoid signed |
| overflow when collecting bytes of a number. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * cris-dis.c (print_with_operands): Avoid signed integer |
| overflow when collecting bytes of a 32-bit integer. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * cr16-dis.c (EXTRACT, SBM): Rewrite. |
| (cr16_match_opcode): Delete duplicate bcond test. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * bfin-dis.c (HOST_LONG_WORD_SIZE, XFIELD): Delete. |
| (SIGNBIT): New. |
| (MASKBITS, SIGNEXTEND): Rewrite. |
| (fmtconst): Don't use ? expression now that SIGNEXTEND uses |
| unsigned arithmetic, instead assign result of SIGNEXTEND back |
| to x. |
| (fmtconst_val): Use 1u in shift expression. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * arc-dis.c (find_format_from_table): Use ull constant when |
| shifting by up to 32. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| PR 25270 |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): Return |
| false when field is zero for sve_size_tsz_bhs. |
| |
| 2019-12-11 Alan Modra <amodra@gmail.com> |
| |
| * epiphany-ibld.c: Regenerate. |
| |
| 2019-12-10 Alan Modra <amodra@gmail.com> |
| |
| PR 24960 |
| * disassemble.c (disassemble_free_target): New function. |
| |
| 2019-12-10 Alan Modra <amodra@gmail.com> |
| |
| * cgen-dis.in (print_insn_@arch@): Replace insn_sets with private_data. |
| * disassemble.c (disassemble_init_for_target): Likewise. |
| * bpf-dis.c: Regenerate. |
| * epiphany-dis.c: Regenerate. |
| * fr30-dis.c: Regenerate. |
| * frv-dis.c: Regenerate. |
| * ip2k-dis.c: Regenerate. |
| * iq2000-dis.c: Regenerate. |
| * lm32-dis.c: Regenerate. |
| * m32c-dis.c: Regenerate. |
| * m32r-dis.c: Regenerate. |
| * mep-dis.c: Regenerate. |
| * mt-dis.c: Regenerate. |
| * or1k-dis.c: Regenerate. |
| * xc16x-dis.c: Regenerate. |
| * xstormy16-dis.c: Regenerate. |
| |
| 2019-12-10 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (private): Delete variable. |
| (get_powerpc_dialect): Don't segfault on NULL info->private_data. |
| (powerpc_init_dialect): Don't use global private. |
| |
| 2019-12-10 Alan Modra <amodra@gmail.com> |
| |
| * s12z-opc.c: Formatting. |
| |
| 2019-12-08 Alan Modra <amodra@gmail.com> |
| |
| * s12z-opc.c (exg_sex_discrim): Don't leak memory on invalid |
| registers. |
| |
| 2019-12-05 Jan Beulich <jbeulich@suse.com> |
| |
| * aarch64-tbl.h (aarch64_feature_crypto, |
| aarch64_feature_crypto_v8_2, CRYPTO, CRYPTO_V8_2, CRYP_INSN, |
| CRYPTO_V8_2_INSN): Delete. |
| |
| 2019-12-05 Alan Modra <amodra@gmail.com> |
| |
| PR 25249 |
| * microblaze-dis.c (NUM_STRBUFS, STRBUF_SIZE): Define. |
| (struct string_buf): New. |
| (strbuf): New function. |
| (get_field): Use strbuf rather than strdup of local temp. |
| (get_field_imm, get_field_imm5, get_field_imm5_mbar): Likewise. |
| (get_field_rfsl, get_field_imm15): Likewise. |
| (get_field_rd, get_field_r1, get_field_r2): Update macros. |
| (get_field_special): Likewise. Don't strcpy spr. Formatting. |
| (print_insn_microblaze): Formatting. Init and pass string_buf to |
| get_field functions. |
| |
| 2019-12-04 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (lfs, lgs, lss): Drop No_qSuf. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-12-04 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (mod_table): Use Ev instead of Em for movdiri. |
| |
| 2019-12-04 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (push, pop): Drop DefaultSize from GPR-only |
| forms. |
| (xbegin): Drop DefaultSize. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-11-22 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * opcodes/arm-dis.c (arm_opcodes, thumb32_opcodes): |
| Change the coproc CRC conditions to use the extension |
| feature set, second word, base on ARM_EXT2_CRC. |
| |
| 2019-11-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (syscall, sysret): Drop Cpu64 forms. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-11-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (opcode_modifiers): Remove JumpDword, JumpByte, |
| JumpInterSegment, and JumpAbsolute entries. |
| * i386-opc.h (JUMP, JUMP_DWORD, JUMP_BYTE, JUMP_INTERSEGMENT, |
| JUMP_ABSOLUTE): Define. |
| (struct i386_opcode_modifier): Extend jump field to 3 bits. |
| Remove jumpdword, jumpbyte, jumpintersegment, and jumpabsolute |
| fields. |
| * i386-opc.tbl (JumpByte, JumpDword, JumpAbsolute, |
| JumpInterSegment): Define. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-11-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init): Remove |
| OPERAND_TYPE_JUMPABSOLUTE entry. |
| (opcode_modifiers): Add JumpAbsolute entry. |
| (operand_types): Remove JumpAbsolute entry. |
| * i386-opc.h (JumpAbsolute): Move between enums. |
| (struct i386_opcode_modifier): Add jumpabsolute field. |
| (union i386_operand_type): Remove jumpabsolute field. |
| * i386-opc.tbl (call, lcall, jmp, ljmp): Move JumpAbsolute. |
| * i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-11-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (opcode_modifiers): Add AnySize entry. |
| (operand_types): Remove AnySize entry. |
| * i386-opc.h (AnySize): Move between enums. |
| (struct i386_opcode_modifier): Add anysize field. |
| (OTUnused): Un-comment. |
| (union i386_operand_type): Remove anysize field. |
| * i386-opc.tbl (lea, invlpg, clflush, prefetchnta, prefetcht0, |
| prefetcht1, prefetcht2, prefetchtw, bndmk, bndcl, bndcu, bndcn, |
| bndstx, bndldx, prefetchwt1, clflushopt, clwb, cldemote): Move |
| AnySize. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-11-12 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_insn_types): Replace the INSN_CLASS_I with |
| INSN_CLASS_F and the INSN_CLASS_C with INSN_CLASS_F_AND_C if we |
| use the floating point register (FPR). |
| |
| 2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * opcodes/arm-dis.c (mve_opcodes): Enable VMOV imm to vec with |
| cmode 1101. |
| (is_mve_encoding_conflict): Update cmode conflict checks for |
| MVE_VMVN_IMM. |
| |
| 2019-11-12 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_ESSEG |
| entry. |
| (operand_types): Remove EsSeg entry. |
| (main): Replace stale use of OTMax. |
| * i386-opc.h (IS_STRING_ES_OP0, IS_STRING_ES_OP1): Define. |
| (struct i386_opcode_modifier): Expand isstring field to 2 bits. |
| (EsSeg): Delete. |
| (OTUnused): Comment out. |
| (union i386_operand_type): Remove esseg field. |
| * i386-opc.tbl (IsStringEsOp0, IsStringEsOp1): Define. |
| (cmps, scmp, scas, ssca, cmpsd): Add IsStringEsOp0. |
| (ins, movs, smov, movsd): Add IsStringEsOpOp1. |
| (stos, ssto): Add IsStringEsOp0/IsStringEsOpOp1. |
| * i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-11-12 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_instances): Add RegB entry. |
| * i386-opc.h (enum operand_instance): Add RegB. |
| * i386-opc.tbl (RegC, RegD, RegB): Define. |
| (Acc, ShiftCount, InOutPortReg): Adjust definitions. |
| (monitor, mwait, invlpga, skinit, vmload, vmrun, vmsave, clzero, |
| monitorx, mwaitx): Drop ImmExt and convert encodings |
| accordingly. |
| * i386-reg.tbl (ecx, rcx): Add Instance=RegC. |
| (edx, rdx): Add Instance=RegD. |
| (ebx, rbx): Add Instance=RegB. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-11-12 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init): Adjust |
| OPERAND_TYPE_INOUTPORTREG, OPERAND_TYPE_SHIFTCOUNT, |
| OPERAND_TYPE_FLOATACC, OPERAND_TYPE_ACC8, OPERAND_TYPE_ACC16, |
| OPERAND_TYPE_ACC32, and OPERAND_TYPE_ACC64 entries. |
| (operand_instances): New. |
| (operand_types): Drop InOutPortReg, ShiftCount, and Acc entries. |
| (output_operand_type): New parameter "instance". Process it. |
| (process_i386_operand_type): New local variable "instance". |
| (main): Adjust static assertions. |
| * i386-opc.h (INSTANCE_WIDTH): Define. |
| (enum operand_instance): New. |
| (Acc, InOutPortReg, ShiftCount): Replace by ClassInstance. |
| (union i386_operand_type): Replace acc, inoutportreg, and |
| shiftcount by instance. |
| * i386-opc.tbl (Acc, InOutPortReg, ShiftCount): Define. |
| * i386-reg.tbl (st, al, cl, ax, dx, eax, rax, xmm0, st(0)): |
| Add Instance=. |
| * i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-11-11 Jan Beulich <jbeulich@suse.com> |
| |
| * aarch64-tbl.h (aarch64_opcode_table): Switch SVE2's |
| smaxp/sminp entries' "tied_operand" field to 2. |
| |
| 2019-11-11 Jan Beulich <jbeulich@suse.com> |
| |
| * aarch64-opc.c (operand_general_constraint_met_p): Replace |
| "index" local variable by that of the already existing "num". |
| |
| 2019-11-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/25167 |
| * i386-opc.tbl: Remove IgnoreSize from cmpsd and movsd. |
| * i386-tbl.h: Regenerated. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init): Add Class= to |
| OPERAND_TYPE_REGMASK and OPERAND_TYPE_REGBND entries. Move up |
| OPERAND_TYPE_REGBND entry. |
| (operand_classes): Add RegMask and RegBND entries. |
| (operand_types): Drop RegMask and RegBND entry. |
| * i386-opc.h (enum operand_class): Add RegMask and RegBND. |
| (RegMask, RegBND): Delete. |
| (union i386_operand_type): Remove regmask and regbnd fields. |
| * i386-opc.tbl (RegMask, RegBND): Define. |
| * i386-reg.tbl: Replace RegMask by Class=RegMask and RegBND by |
| Class=RegBND. |
| * i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init): Add Class= to |
| OPERAND_TYPE_REGMMX, OPERAND_TYPE_REGXMM, OPERAND_TYPE_REGYMM, and |
| OPERAND_TYPE_REGZMM entries. |
| (operand_classes): Add RegMMX and RegSIMD entries. |
| (operand_types): Drop RegMMX and RegSIMD entries. |
| * i386-opc.h (enum operand_class): Add RegMMX and RegSIMD. |
| (RegMMX, RegSIMD): Delete. |
| (union i386_operand_type): Remove regmmx and regsimd fields. |
| * i386-opc.tbl (RegMMX): Define. |
| (RegXMM, RegYMM, RegZMM): Add Class=. |
| * i386-reg.tbl: Replace RegMMX by Class=RegMMX and RegSIMD by |
| Class=RegSIMD. |
| * i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init): Add Class= to |
| OPERAND_TYPE_CONTROL, OPERAND_TYPE_TEST, and OPERAND_TYPE_DEBUG |
| entries. |
| (operand_classes): Add RegCR, RegDR, and RegTR entries. |
| (operand_types): Drop Control, Debug, and Test entries. |
| * i386-opc.h (enum operand_class): Add RegCR, RegDR, and RegTR. |
| (Control, Debug, Test): Delete. |
| (union i386_operand_type): Remove control, debug, and test |
| fields. |
| * i386-opc.tbl (Control, Debug, Test): Define. |
| * i386-reg.tbl: Replace Control by Class=RegCR, Debug by |
| Class=RegDR, and Test by Class=RegTR. |
| * i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init): Add Class= to |
| OPERAND_TYPE_SREG entry. |
| (operand_classes): Add SReg entry. |
| (operand_types): Drop SReg entry. |
| * i386-opc.h (enum operand_class): Add SReg. |
| (SReg): Delete. |
| (union i386_operand_type): Remove sreg field. |
| * i386-opc.tbl (SReg): Define. |
| * i386-reg.tbl: Replace SReg by Class=SReg. |
| * i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init): Add Class=. New |
| OPERAND_TYPE_ANYIMM entry. |
| (operand_classes): New. |
| (operand_types): Drop Reg entry. |
| (output_operand_type): New parameter "class". Process it. |
| (process_i386_operand_type): New local variable "class". |
| (main): Adjust static assertions. |
| * i386-opc.h (CLASS_WIDTH): Define. |
| (enum operand_class): New. |
| (Reg): Replace by Class. Adjust comment. |
| (union i386_operand_type): Replace reg by class. |
| * i386-opc.tbl (Reg8, Reg16, Reg32, Reg64, FloatReg): Add |
| Class=. |
| * i386-reg.tbl: Replace Reg by Class=Reg. |
| * i386-init.h: Re-generate. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * opcodes/aarch64-tbl.h (V8_6_INSN): New macro for v8.6 instructions. |
| (aarch64_opcode_table): Add data gathering hint mnemonic. |
| * opcodes/aarch64-dis-2.c: Account for new instruction. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * arm-dis.c (neon_opcodes): Add i8mm SIMD instructions. |
| |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve, |
| aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm, |
| aarch64_feature_f64mm): New feature sets. |
| (INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN, |
| F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply |
| instructions. |
| (I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set |
| macros. |
| (QL_MMLA64, OP_SVE_SBB): New qualifiers. |
| (OP_SVE_QQQ): New qualifier. |
| (INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC, |
| F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support |
| the movprfx constraint. |
| (aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32. |
| (aarch64_opcode_table): Define new instructions smmla, |
| ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod, |
| uzip{1/2}, trn{1/2}. |
| * aarch64-opc.c (operand_general_constraint_met_p): Handle |
| AARCH64_OPND_SVE_ADDR_RI_S4x32. |
| (aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32. |
| * aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode): |
| Account for new instructions. |
| * opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new |
| S4x32 operand. |
| * aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * arm-dis.c (select_arm_features): Update bfd_march_arm_8 with |
| Armv8.6-A. |
| (coprocessor_opcodes): Add bfloat16 vcvt{t,b}. |
| (neon_opcodes): Add bfloat SIMD instructions. |
| (print_insn_coprocessor): Add new control character %b to print |
| condition code without checking cp_num. |
| (print_insn_neon): Account for BFloat16 instructions that have no |
| special top-byte handling. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * arm-dis.c (print_insn_coprocessor, |
| print_insn_generic_coprocessor): Create wrapper functions around |
| the implementation of the print_insn_coprocessor control codes. |
| (print_insn_coprocessor_1): Original print_insn_coprocessor |
| function that now takes which array to look at as an argument. |
| (print_insn_arm): Use both print_insn_coprocessor and |
| print_insn_generic_coprocessor. |
| (print_insn_thumb32): As above. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H |
| in reglane special case. |
| * aarch64-dis-2.c (aarch64_opcode_lookup_1, |
| aarch64_find_next_opcode): Account for new instructions. |
| * aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H |
| in reglane special case. |
| * aarch64-opc.c (struct operand_qualifier_data): Add data for |
| new AARCH64_OPND_QLF_S_2H qualifier. |
| * aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2, |
| QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers. |
| (aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve): New feature |
| sets. |
| (BFLOAT_SVE, BFLOAT): New feature set macros. |
| (BFLOAT_SVE_INSN, BFLOAT_INSN): New macros to define BFloat16 |
| instructions. |
| (aarch64_opcode_table): Define new instructions bfdot, |
| bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t] |
| bfcvtn2, bfcvt. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-tbl.h (ARMV8_6): New macro. |
| |
| 2019-11-07 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (prefix_table): Add mcommit. |
| (rm_table): Add rdpru. |
| * i386-gen.c (cpu_flag_init): Adjust CPU_ZNVER2_FLAGS entry. Add |
| CPU_RDPRU_FLAGS and CPU_MCOMMIT_FLAGS entries. |
| (cpu_flags): Add CpuRDPRU and CpuMCOMMIT entries. |
| * i386-opc.h (CpuRDPRU, CpuMCOMMIT): New. |
| (union i386_cpu_flags): Add cpurdpru and cpumcommit fields. |
| * i386-opc.tbl (mcommit, rdpru): New. |
| * i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-11-07 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_Mwait): Drop local variable "names", use |
| "names32" instead. |
| (OP_Monitor): Drop local variable "op1_names", re-purpose |
| "names" for it instead, and replace former "names" uses by |
| "names32" ones. |
| |
| 2019-11-07 Jan Beulich <jbeulich@suse.com> |
| |
| PR/gas 25167 |
| * opcodes/i386-opc.tbl (movsd, cmpsd): Drop IgnoreSize from |
| operand-less forms. |
| * opcodes/i386-tbl.h: Re-generate. |
| |
| 2019-11-05 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_Mwaitx): Delete. |
| (prefix_table): Use OP_Mwait for mwaitx entry. |
| (OP_Mwait): Also handle mwaitx. |
| |
| 2019-11-05 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (PREFIX_0F01_REG_7_MOD_3_RM_2, |
| PREFIX_0F01_REG_7_MOD_3_RM_3): New. |
| (prefix_table): Add respective entries. |
| (rm_table): Link to those entries. |
| |
| 2019-11-05 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (REG_0F1C_MOD_0): Rename to ... |
| (REG_0F1C_P_0_MOD_0): ... this. |
| (REG_0F1E_MOD_3): Rename to ... |
| (REG_0F1E_P_1_MOD_3): ... this. |
| (RM_0F01_REG_5): Rename to ... |
| (RM_0F01_REG_5_MOD_3): ... this. |
| (RM_0F01_REG_7): Rename to ... |
| (RM_0F01_REG_7_MOD_3): ... this. |
| (RM_0F1E_MOD_3_REG_7): Rename to ... |
| (RM_0F1E_P_1_MOD_3_REG_7): ... this. |
| (RM_0FAE_REG_6): Rename to ... |
| (RM_0FAE_REG_6_MOD_3_P_0): ... this. |
| (RM_0FAE_REG_7): Rename to ... |
| (RM_0FAE_REG_7_MOD_3): ... this. |
| (PREFIX_MOD_0_0F01_REG_5): Rename to ... |
| (PREFIX_0F01_REG_5_MOD_0): ... this. |
| (PREFIX_MOD_3_0F01_REG_5_RM_0): Rename to ... |
| (PREFIX_0F01_REG_5_MOD_3_RM_0): ... this. |
| (PREFIX_MOD_3_0F01_REG_5_RM_2): Rename to ... |
| (PREFIX_0F01_REG_5_MOD_3_RM_2): ... this. |
| (PREFIX_0FAE_REG_0): Rename to ... |
| (PREFIX_0FAE_REG_0_MOD_3): ... this. |
| (PREFIX_0FAE_REG_1): Rename to ... |
| (PREFIX_0FAE_REG_1_MOD_3): ... this. |
| (PREFIX_0FAE_REG_2): Rename to ... |
| (PREFIX_0FAE_REG_2_MOD_3): ... this. |
| (PREFIX_0FAE_REG_3): Rename to ... |
| (PREFIX_0FAE_REG_3_MOD_3): ... this. |
| (PREFIX_MOD_0_0FAE_REG_4): Rename to ... |
| (PREFIX_0FAE_REG_4_MOD_0): ... this. |
| (PREFIX_MOD_3_0FAE_REG_4): Rename to ... |
| (PREFIX_0FAE_REG_4_MOD_3): ... this. |
| (PREFIX_MOD_0_0FAE_REG_5): Rename to ... |
| (PREFIX_0FAE_REG_5_MOD_0): ... this. |
| (PREFIX_MOD_3_0FAE_REG_5): Rename to ... |
| (PREFIX_0FAE_REG_5_MOD_3): ... this. |
| (PREFIX_MOD_0_0FAE_REG_6): Rename to ... |
| (PREFIX_0FAE_REG_6_MOD_0): ... this. |
| (PREFIX_MOD_1_0FAE_REG_6): Rename to ... |
| (PREFIX_0FAE_REG_6_MOD_3): ... this. |
| (PREFIX_0FAE_REG_7): Rename to ... |
| (PREFIX_0FAE_REG_7_MOD_0): ... this. |
| (PREFIX_MOD_0_0FC3): Rename to ... |
| (PREFIX_0FC3_MOD_0): ... this. |
| (PREFIX_MOD_0_0FC7_REG_6): Rename to ... |
| (PREFIX_0FC7_REG_6_MOD_0): ... this. |
| (PREFIX_MOD_3_0FC7_REG_6): Rename to ... |
| (PREFIX_0FC7_REG_6_MOD_3): ... this. |
| (PREFIX_MOD_3_0FC7_REG_7): Rename to ... |
| (PREFIX_0FC7_REG_7_MOD_3): ... this. |
| (reg_table, prefix_table, mod_table, rm_table): Adjust |
| accordingly. |
| |
| 2019-11-04 Nick Clifton <nickc@redhat.com> |
| |
| * v850-dis.c (get_v850_sreg_name): New function. Returns the name |
| of a v850 system register. Move the v850_sreg_names array into |
| this function. |
| (get_v850_reg_name): Likewise for ordinary register names. |
| (get_v850_vreg_name): Likewise for vector register names. |
| (get_v850_cc_name): Likewise for condition codes. |
| * get_v850_float_cc_name): Likewise for floating point condition |
| codes. |
| (get_v850_cacheop_name): Likewise for cache-ops. |
| (get_v850_prefop_name): Likewise for pref-ops. |
| (disassemble): Use the new accessor functions. |
| |
| 2019-10-30 Delia Burduv <delia.burduv@arm.com> |
| |
| * aarch64-opc.c (print_immediate_offset_address): Don't print the |
| immediate for the writeback form of ldraa/ldrab if it is 0. |
| * aarch64-tbl.h: Updated the documentation for ADDR_SIMM10. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2019-10-30 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_shorthands): Delete. |
| (operand_type_init): Expand previous shorthands. |
| (set_bitfield_from_shorthand): Rename back to ... |
| (set_bitfield_from_cpu_flag_init): ... this. Drop processing |
| of operand_type_init[]. |
| (set_bitfield): Adjust call to the above function. |
| * i386-opc.tbl (Reg8, Reg16, Reg32, Reg64, FloatAcc, FloatReg, |
| RegXMM, RegYMM, RegZMM): Define. |
| * i386-reg.tbl: Expand prior shorthands. |
| |
| 2019-10-30 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (output_i386_opcode): Change order of fields |
| emitted to output. |
| * i386-opc.h (struct insn_template): Move operands field. |
| Convert extension_opcode field to unsigned short. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-10-30 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (process_i386_opcode_modifier): Report bogus uses |
| of W. |
| * i386-opc.h (W): Extend comment. |
| * i386-opc.tbl (mov, movabs, movq): Drop W and adjust opcodes of |
| general purpose variants not allowing for byte operands. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-10-29 Nick Clifton <nickc@redhat.com> |
| |
| * tic30-dis.c (print_branch): Correct size of operand array. |
| |
| 2019-10-29 Nick Clifton <nickc@redhat.com> |
| |
| * d30v-dis.c (print_insn): Check that operand index is valid |
| before attempting to access the operands array. |
| |
| 2019-10-29 Nick Clifton <nickc@redhat.com> |
| |
| * ia64-opc.c (locate_opcode_ent): Prevent a negative shift when |
| locating the bit to be tested. |
| |
| 2019-10-29 Nick Clifton <nickc@redhat.com> |
| |
| * s12z-dis.c (opr_emit_disassembly): Check for illegal register |
| values. |
| (shift_size_table): Use a fixed size defined as S12Z_N_SIZES. |
| (print_insn_s12z): Check for illegal size values. |
| |
| 2019-10-28 Nick Clifton <nickc@redhat.com> |
| |
| * csky-dis.c (csky_chars_to_number): Check for a negative |
| count. Use an unsigned integer to construct the return value. |
| |
| 2019-10-28 Nick Clifton <nickc@redhat.com> |
| |
| * tic30-dis.c (OPERAND_BUFFER_LEN): Define. Use as length of |
| operand buffer. Set value to 15 not 13. |
| (get_register_operand): Use OPERAND_BUFFER_LEN. |
| (get_indirect_operand): Likewise. |
| (print_two_operand): Likewise. |
| (print_three_operand): Likewise. |
| (print_oar_insn): Likewise. |
| |
| 2019-10-28 Nick Clifton <nickc@redhat.com> |
| |
| * ns32k-dis.c (bit_extract): Add sanitiy check of parameters. |
| (bit_extract_simple): Likewise. |
| (bit_copy): Likewise. |
| (pirnt_insn_ns32k): Ensure that uninitialised elements in the |
| index_offset array are not accessed. |
| |
| 2019-10-28 Nick Clifton <nickc@redhat.com> |
| |
| * xgate-dis.c (print_insn): Fix decoding of the XGATE_OP_DYA |
| operand. |
| |
| 2019-10-25 Nick Clifton <nickc@redhat.com> |
| |
| * rx-dis.c (print_insn_rx): Use parenthesis to ensure correct |
| access to opcodes.op array element. |
| |
| 2019-10-23 Nick Clifton <nickc@redhat.com> |
| |
| * rx-dis.c (get_register_name): Fix spelling typo in error |
| message. |
| (get_condition_name, get_flag_name, get_double_register_name) |
| (get_double_register_high_name, get_double_register_low_name) |
| (get_double_control_register_name, get_double_condition_name) |
| (get_opsize_name, get_size_name): Likewise. |
| |
| 2019-10-22 Nick Clifton <nickc@redhat.com> |
| |
| * rx-dis.c (get_size_name): New function. Provides safe |
| access to name array. |
| (get_opsize_name): Likewise. |
| (print_insn_rx): Use the accessor functions. |
| |
| 2019-10-16 Nick Clifton <nickc@redhat.com> |
| |
| * rx-dis.c (get_register_name): New function. Provides safe |
| access to name array. |
| (get_condition_name, get_flag_name, get_double_register_name) |
| (get_double_register_high_name, get_double_register_low_name) |
| (get_double_control_register_name, get_double_condition_name): |
| Likewise. |
| (print_insn_rx): Use the accessor functions. |
| |
| 2019-10-09 Nick Clifton <nickc@redhat.com> |
| |
| PR 25041 |
| * avr-dis.c (avr_operand): Fix construction of address for lds/sts |
| instructions. |
| |
| 2019-10-07 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-opc.tbl (movsd): Add Dword and IgnoreSize. |
| (cmpsd): Likewise. Move EsSeg to other operand. |
| * opcodes/i386-tbl.h: Re-generate. |
| |
| 2019-09-23 Alan Modra <amodra@gmail.com> |
| |
| * m68k-dis.c: Include cpu-m68k.h |
| |
| 2019-09-23 Alan Modra <amodra@gmail.com> |
| |
| * mips-dis.c: Include elfxx-mips.h. Move "elf-bfd.h" and |
| "elf/mips.h" earlier. |
| |
| 2018-09-20 Jan Beulich <jbeulich@suse.com> |
| |
| PR gas/25012 |
| * i386-opc.tbl (push, pop): Re-instate distinct Cpu64 templates |
| with SReg operand. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-09-18 Alan Modra <amodra@gmail.com> |
| |
| * arc-ext.c: Update throughout for bfd section macro changes. |
| |
| 2019-09-18 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * Makefile.in: Re-generate. |
| * configure: Re-generate. |
| |
| 2019-09-17 Maxim Blinov <maxim.blinov@embecosm.com> |
| |
| * riscv-opc.c (riscv_opcodes): Change subset field |
| to insn_class field for all instructions. |
| (riscv_insn_types): Likewise. |
| |
| 2019-09-16 Phil Blundell <pb@pbcl.net> |
| |
| * configure: Regenerated. |
| |
| 2019-09-10 Miod Vallat <miod@online.fr> |
| |
| PR 24982 |
| * m68k-opc.c: Correct aliases for tdivsl and tdivul. |
| |
| 2019-09-09 Phil Blundell <pb@pbcl.net> |
| |
| binutils 2.33 branch created. |
| |
| 2019-09-03 Nick Clifton <nickc@redhat.com> |
| |
| PR 24961 |
| * tic30-dis.c (get_indirect_operand): Check for bufcnt being |
| greater than zero before indexing via (bufcnt -1). |
| |
| 2019-09-03 Nick Clifton <nickc@redhat.com> |
| |
| PR 24958 |
| * mmix-dis.c (MAX_REG_NAME_LEN): Define. |
| (MAX_SPEC_REG_NAME_LEN): Define. |
| (struct mmix_dis_info): Use defined constants for array lengths. |
| (get_reg_name): New function. |
| (get_sprec_reg_name): New function. |
| (print_insn_mmix): Use new functions. |
| |
| 2019-08-27 Srinath Parvathaneni <srinath.parvathaneni@arm.com> |
| |
| * arm-dis.c (mve_opcodes): Add entry for MVE_VMOV_VEC_TO_VEC. |
| (is_mve_undefined): Add case for MVE_VMOV_VEC_TO_VEC. |
| (print_insn_mve): Add condition to check Qm==Qn of VORR instruction. |
| |
| 2019-08-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * aarch64-opc.c (aarch64_sys_regs): Update encoding of tfsre0_el1, |
| tfsr_el1, tfsr_el2, tfsr_el3, tfsr_el12. |
| (aarch64_sys_reg_supported_p): Update checks for the above. |
| |
| 2019-08-12 Srinath Parvathaneni <srinath.parvathaneni@arm.com> |
| |
| * arm-dis.c (struct mopcode32 mve_opcodes): Modify the mask for |
| cases MVE_SQRSHRL and MVE_UQRSHLL. |
| (print_insn_mve): Add case for specifier 'k' to check |
| specific bit of the instruction. |
| |
| 2019-08-07 Phillipe Antoine <p.antoine@catenacyber.fr> |
| |
| PR 24854 |
| * arc-dis.c (arc_insn_length): Return 0 rather than aborting when |
| encountering an unknown machine type. |
| (print_insn_arc): Handle arc_insn_length returning 0. In error |
| cases return -1 rather than calling abort. |
| |
| 2019-08-07 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (fld, fstp): Drop FloatMF from extended forms. |
| (fldcw, fnstcw, fstcw, fnstsw, fstsw): Replace FloatMF by |
| IgnoreSize. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-08-05 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * arm-dis.c: Only accept signed variants of VQ(R)DMLAH and VQ(R)DMLASH |
| instructions. |
| |
| 2019-07-30 Mel Chen <mel.chen@sifive.com> |
| |
| * riscv-opc.c (riscv_opcodes): Set frsr, fssr, frcsr, fscsr, frrm, |
| fsrm, fsrmi, frflags, fsflags, fsflagsi to alias instructions. |
| |
| * riscv-opc.c (riscv_opcodes): Adjust order of frsr, frcsr, fssr, |
| fscsr. |
| |
| 2019-07-24 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * arc-dis.c (skip_this_opcode): Check also for 0x07 major opcodes, |
| and MPY class instructions. |
| (parse_option): Add nps400 option. |
| (print_arc_disassembler_options): Add nps400 info. |
| |
| 2019-07-24 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * arc-ext-tbl.h (bspeek): Remove it, added to main table. |
| (bspop): Likewise. |
| (modapp): Likewise. |
| * arc-opc.c (RAD_CHK): Add. |
| * arc-tbl.h: Regenerate. |
| |
| 2019-07-23 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * aarch64-opc.c (aarch64_sys_regs): Add gmid_el1 entry. |
| (aarch64_sys_reg_supported_p): Handle gmid_el1 encoding. |
| |
| 2019-07-22 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * arm-dis.c (is_mve_unpredictable): Stop marking some MVE |
| instructions as UNPREDICTABLE. |
| |
| 2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-desc.c: Regenerated. |
| |
| 2019-07-17 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (static_assert): Define. |
| (main): Use it. |
| * i386-opc.h (Opcode_Modifier_Max): Rename to ... |
| (Opcode_Modifier_Num): ... this. |
| (Mem): Delete. |
| |
| 2019-07-16 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_types): Move RegMem ... |
| (opcode_modifiers): ... here. |
| * i386-opc.h (RegMem): Move to opcode modifer enum. |
| (union i386_operand_type): Move regmem field ... |
| (struct i386_opcode_modifier): ... here. |
| * i386-opc.tbl (RegMem): Define. |
| (mov, movq): Move RegMem on segment, control, debug, and test |
| register flavors. |
| (pextrb): Move RegMem on register only flavors. Add IgnoreSize |
| to non-SSE2AVX flavor. |
| (extractps, pextrw, vcvtps2ph, vextractps, vpextrb, vpextrw): |
| Move RegMem on register only flavors. Drop IgnoreSize from |
| legacy encoding flavors. |
| (movss, movsd, vmovss, vmovsd): Drop RegMem from register only |
| flavors. |
| (vpinsrb, vpinsrw): Drop IgnoreSize where still present on |
| register only flavors. |
| (vmovd): Move RegMem and drop IgnoreSize on register only |
| flavor. Change opcode and operand order to store form. |
| * opcodes/i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-07-16 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init, operand_types): Replace SReg |
| entries. |
| * i386-opc.h (SReg2, SReg3): Replace by ... |
| (SReg): ... this. |
| (union i386_operand_type): Replace sreg fields. |
| * i386-opc.tbl (mov, ): Use SReg. |
| (push, pop): Likewies. Drop i386 and x86-64 specific segment |
| register flavors. |
| * i386-reg.tbl (cs, ds, es, fs, gs, ss, flat): Use SReg. |
| * opcodes/i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-desc.c: Regenerate. |
| * bpf-opc.c: Likewise. |
| * bpf-opc.h: Likewise. |
| |
| 2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-desc.c: Regenerate. |
| * bpf-opc.c: Likewise. |
| |
| 2019-07-10 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * arm-dis.c (print_insn_coprocessor): Rename index to |
| index_operand. |
| |
| 2019-07-05 Kito Cheng <kito.cheng@sifive.com> |
| |
| * riscv-opc.c (riscv_insn_types): Add r4 type. |
| |
| * riscv-opc.c (riscv_insn_types): Add b and j type. |
| |
| * opcodes/riscv-opc.c (riscv_insn_types): Remove incorrect |
| format for sb type and correct s type. |
| |
| 2019-07-02 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * aarch64-tbl.h (aarch64_opcode): Set C_SCAN_MOVPRFX for the |
| SVE FMOV alias of FCPY. |
| |
| 2019-07-02 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * aarch64-tbl.h (aarch64_opcode_table): Add C_MAX_ELEM flags |
| to SVE fcvtzs, fcvtzu, scvtf and ucvtf entries. |
| |
| 2019-07-02 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * aarch64-opc.c (verify_constraints): Skip GPRs when scanning the |
| registers in an instruction prefixed by MOVPRFX. |
| |
| 2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new |
| sve_size_13 icode to account for variant behaviour of |
| pmull{t,b}. |
| * aarch64-dis-2.c: Regenerate. |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new |
| sve_size_13 icode to account for variant behaviour of |
| pmull{t,b}. |
| * aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier. |
| (OP_SVE_VVV_Q_D): Add new qualifier. |
| (OP_SVE_VVV_QHD_DBS): Remove now unused qualifier. |
| (struct aarch64_opcode): Split pmull{t,b} into those requiring |
| AES and those not. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * opcodes/i386-gen.c (operand_type_init): Remove |
| OPERAND_TYPE_VEC_IMM4 entry. |
| (operand_types): Remove Vec_Imm4. |
| * opcodes/i386-opc.h (Vec_Imm4): Delete. |
| (union i386_operand_type): Remove vec_imm4. |
| * i386-opc.tbl (vpermil2pd, vpermil2ps): Remove Vec_Imm4. |
| * opcodes/i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (lfence, mfence, sfence, monitor, mwait, vmcall, |
| vmlaunch, vmresume, vmxoff, vmfunc, xgetbv, xsetbv, swapgs, |
| rdtscp, clgi, invlpga, skinit, stgi, vmload, vmmcall, vmrun, |
| vmsave, montmul, xsha1, xsha256, xstorerng, xcryptecb, |
| xcryptcbc, xcryptctr, xcryptcfb, xcryptofb, xstore, clac, stac, |
| monitorx, mwaitx): Drop ImmExt from operand-less forms. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (and, or): Add Optimize to forms allowing two |
| register operands. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (C): New. |
| (paddb, paddw, paddd, paddq, paddsb, paddsw, paddusb, paddusw, |
| pand, pcmpeqb, pcmpeqw, pcmpeqd, pmaddwd, pmulhw, pmullw, |
| por, pxor, andps, cmpeqps, cmpeqss, cmpneqps, cmpneqss, |
| cmpordps, cmpordss, cmpunordps, cmpunordss, orps, pavgb, pavgw, |
| pmaxsw, pmaxub, pminsw, pminub, pmulhuw, xorps, andpd, cmpeqpd, |
| cmpeqsd, cmpneqpd, cmpneqsd, cmpordpd, cmpordsd, cmpunordpd, |
| cmpunordsd, orpd, xorpd, pmuludq, vandpd, vandps, vcmpeq_ospd, |
| vcmpeq_osps, vcmpeq_ossd, vcmpeq_osss, vcmpeqpd, vcmpeqps, |
| vcmpeqsd, vcmpeqss, vcmpeq_uqpd, vcmpeq_uqps, vcmpeq_uqsd, |
| vcmpeq_uqss, vcmpeq_uspd, vcmpeq_usps, vcmpeq_ussd, |
| vcmpeq_usss, vcmpfalse_ospd, vcmpfalse_osps, vcmpfalse_ossd, |
| vcmpfalse_osss, vcmpfalsepd, vcmpfalseps, vcmpfalsesd, |
| vcmpfalsess, vcmpneq_oqpd, vcmpneq_oqps, vcmpneq_oqsd, |
| vcmpneq_oqss, vcmpneq_ospd, vcmpneq_osps, vcmpneq_ossd, |
| vcmpneq_osss, vcmpneqpd, vcmpneqps, vcmpneqsd, vcmpneqss, |
| vcmpneq_uspd, vcmpneq_usps, vcmpneq_ussd, vcmpneq_usss, |
| vcmpordpd, vcmpordps, vcmpordsd, vcmpord_spd, vcmpord_sps, |
| vcmpordss, vcmpord_ssd, vcmpord_sss, vcmptruepd, vcmptrueps, |
| vcmptruesd, vcmptruess, vcmptrue_uspd, vcmptrue_usps, |
| vcmptrue_ussd, vcmptrue_usss, vcmpunordpd, vcmpunordps, |
| vcmpunordsd, vcmpunord_spd, vcmpunord_sps, vcmpunordss, |
| vcmpunord_ssd, vcmpunord_sss, vorpd, vorps, vpaddsb, vpaddsw, |
| vpaddb, vpaddd, vpaddq, vpaddw, vpaddusb, vpaddusw, vpand, |
| vpavgb, vpavgw, vpcmpeqb, vpcmpeqd, vpcmpeqw, vpmaddwd, |
| vpmaxsw, vpmaxub, vpminsw, vpminub, vpmulhuw, vpmulhw, vpmullw, |
| vpmuludq, vpor, vpxor, vxorpd, vxorps): Add C to VEX-encoded |
| flavors. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (and, or): Add Optimize to forms allowing two |
| register operands. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis-evex-prefix.h: Use PCLMUL for vpclmulqdq. |
| * i386-opc.tbl (vpclmullqlqdq, vpclmulhqlqdq, vpclmullqhqdq, |
| vpclmulhqhqdq): Add CpuVPCLMULQDQ flavors. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (vextractps, vpextrw, vpinsrw): Remove |
| Disp8MemShift from register only templates. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EXdScalarS, MOD_EVEX_0F10_PREFIX_1, |
| MOD_EVEX_0F10_PREFIX_3, MOD_EVEX_0F11_PREFIX_1, |
| MOD_EVEX_0F11_PREFIX_3, EVEX_W_0F10_P_1_M_0, |
| EVEX_W_0F10_P_1_M_1, EVEX_W_0F10_P_3_M_0, EVEX_W_0F10_P_3_M_1, |
| EVEX_W_0F11_P_1_M_0, EVEX_W_0F11_P_1_M_1, EVEX_W_0F11_P_3_M_0, |
| EVEX_W_0F11_P_3_M_1): Delete. |
| (EVEX_W_0F10_P_1, EVEX_W_0F10_P_3, EVEX_W_0F11_P_1, |
| EVEX_W_0F11_P_3): New. |
| * i386-dis-evex-mod.h: Remove MOD_EVEX_0F10_PREFIX_1, |
| MOD_EVEX_0F10_PREFIX_3, MOD_EVEX_0F11_PREFIX_1, and |
| MOD_EVEX_0F11_PREFIX_3 table entries. |
| * i386-dis-evex-prefix.h: Adjust PREFIX_EVEX_0F10 and |
| PREFIX_EVEX_0F11 table entries. |
| * i386-dis-evex-w.h: Replace EVEX_W_0F10_P_1_M_{0,1}, |
| EVEX_W_0F10_P_3_M_{0,1}, EVEX_W_0F11_P_1_M_{0,1}, and |
| EVEX_W_0F11_P_3_M_{0,1} table entries. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EXdVex, EXdVexS, EXqVex, EXqVexS, XMVex): |
| Delete. |
| |
| 2019-06-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24719 |
| * i386-dis-evex-len.h: Add EVEX_LEN_0F38C6_REG_1_PREFIX_2, |
| EVEX_LEN_0F38C6_REG_2_PREFIX_2, EVEX_LEN_0F38C6_REG_5_PREFIX_2, |
| EVEX_LEN_0F38C6_REG_6_PREFIX_2, EVEX_LEN_0F38C7_R_1_P_2_W_0, |
| EVEX_LEN_0F38C7_R_1_P_2_W_1, EVEX_LEN_0F38C7_R_2_P_2_W_0, |
| EVEX_LEN_0F38C7_R_2_P_2_W_1, EVEX_LEN_0F38C7_R_5_P_2_W_0, |
| EVEX_LEN_0F38C7_R_5_P_2_W_1, EVEX_LEN_0F38C7_R_6_P_2_W_0 and |
| EVEX_LEN_0F38C7_R_6_P_2_W_1. |
| * i386-dis-evex-prefix.h: Update PREFIX_EVEX_0F38C6_REG_1, |
| PREFIX_EVEX_0F38C6_REG_2, PREFIX_EVEX_0F38C6_REG_5 and |
| PREFIX_EVEX_0F38C6_REG_6 entries. |
| * i386-dis-evex-w.h: Update EVEX_W_0F38C7_R_1_P_2, |
| EVEX_W_0F38C7_R_2_P_2, EVEX_W_0F38C7_R_5_P_2 and |
| EVEX_W_0F38C7_R_6_P_2 entries. |
| * i386-dis.c: Add EVEX_LEN_0F38C6_REG_1_PREFIX_2, |
| EVEX_LEN_0F38C6_REG_2_PREFIX_2, EVEX_LEN_0F38C6_REG_5_PREFIX_2, |
| EVEX_LEN_0F38C6_REG_6_PREFIX_2, EVEX_LEN_0F38C7_R_1_P_2_W_0, |
| EVEX_LEN_0F38C7_R_1_P_2_W_1, EVEX_LEN_0F38C7_R_2_P_2_W_0, |
| EVEX_LEN_0F38C7_R_2_P_2_W_1, EVEX_LEN_0F38C7_R_5_P_2_W_0, |
| EVEX_LEN_0F38C7_R_5_P_2_W_1, EVEX_LEN_0F38C7_R_6_P_2_W_0 and |
| EVEX_LEN_0F38C7_R_6_P_2_W_1 enums. |
| |
| 2019-06-27 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (VEX_LEN_0F2A_P_1, VEX_LEN_0F2A_P_3, |
| VEX_LEN_0F2C_P_1, VEX_LEN_0F2C_P_3, VEX_LEN_0F2D_P_1, |
| VEX_LEN_0F2D_P_3): Delete. |
| (vex_len_table): Move vcvtsi2ss, vcvtsi2sd, vcvttss2si, |
| vcvttsd2si, vcvtss2si, and vcvtsd2si leaf entries ... |
| (prefix_table): ... here. |
| |
| 2019-06-27 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (Iq): Delete. |
| (Id): New. |
| (reg_table): Use it for lwpins, lwpval, and bextr. Use Edq for |
| TBM insns. |
| (vex_len_table): Use Edq for vcvtsi2ss, vcvtsi2sd. Use Gdq for |
| vcvttss2si, vcvttsd2si, vcvtss2si, and vcvtsd2si. |
| (OP_E_memory): Also honor needindex when deciding whether an |
| address size prefix needs printing. |
| (OP_I): Remove handling of q_mode. Add handling of d_mode. |
| |
| 2019-06-26 Jim Wilson <jimw@sifive.com> |
| |
| PR binutils/24739 |
| * riscv-dis.c (riscv_disasemble_insn): Set info->endian_code. |
| Set info->display_endian to info->endian_code. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (operand_type_init): Correct OPERAND_TYPE_DEBUG |
| entry. Drop OPERAND_TYPE_ACC entry. Add OPERAND_TYPE_ACC8 and |
| OPERAND_TYPE_ACC16 entries. Adjust OPERAND_TYPE_ACC32 and |
| OPERAND_TYPE_ACC64 entries. |
| * i386-init.h: Re-generate. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (Edqa, dqa_mode, EVEX_W_0F2A_P_1, EVEX_W_0F7B_P_1): |
| Delete. |
| (intel_operand_size, OP_E_register, OP_E_memory): Drop handling |
| of dqa_mode. |
| * i386-dis-evex-prefix.h: Move vcvtsi2ss and vcvtusi2ss leaf |
| entries here. |
| * i386-dis-evex-w.h: Drop EVEX_W_0F2A_P_1 and EVEX_W_0F7B_P_1 |
| entries. Use Edq for vcvtsi2sd and vcvtusi2sd. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_I64): Forword more cases to OP_I(). Drop local |
| variables. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (prefix_table): Use Edq for cvtsi2ss and cvtsi2sd. |
| Use Gdq for cvttss2si, cvttsd2si, cvtss2si, and cvtsd2si, and |
| movnti. |
| * i386-opc.tbl (movnti): Add IgnoreSize. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (and): Mark Imm8S form for optimization. |
| * i386-tbl.h: Re-generate. |
| |
| 2019-06-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis-evex.h: Break into ... |
| * i386-dis-evex-len.h: New file. |
| * i386-dis-evex-mod.h: Likewise. |
| * i386-dis-evex-prefix.h: Likewise. |
| * i386-dis-evex-reg.h: Likewise. |
| * i386-dis-evex-w.h: Likewise. |
| * i386-dis.c: Include i386-dis-evex-reg.h, i386-dis-evex-prefix.h, |
| i386-dis-evex.h, i386-dis-evex-len.h, i386-dis-evex-w.h and |
| i386-dis-evex-mod.h. |
| |
| 2019-06-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24700 |
| * i386-dis-evex.h (evex_table): Update EVEX_W_0F3819_P_2, |
| EVEX_W_0F381A_P_2, EVEX_W_0F381B_P_2, EVEX_W_0F385A_P_2 and |
| EVEX_W_0F385B_P_2. |
| (evex_len_table): Add EVEX_LEN_0F3819_P_2_W_0, |
| EVEX_LEN_0F3819_P_2_W_1, EVEX_LEN_0F381A_P_2_W_0, |
| EVEX_LEN_0F381A_P_2_W_1, EVEX_LEN_0F381B_P_2_W_0, |
| EVEX_LEN_0F381B_P_2_W_1, EVEX_LEN_0F385A_P_2_W_0, |
| EVEX_LEN_0F385A_P_2_W_1, EVEX_LEN_0F385B_P_2_W_0 and |
| EVEX_LEN_0F385B_P_2_W_1. |
| * i386-dis.c (EVEX_LEN_0F3819_P_2_W_0): New enum. |
| (EVEX_LEN_0F3819_P_2_W_1): Likewise. |
| (EVEX_LEN_0F381A_P_2_W_0): Likewise. |
| (EVEX_LEN_0F381A_P_2_W_1): Likewise. |
| (EVEX_LEN_0F381B_P_2_W_0): Likewise. |
| (EVEX_LEN_0F381B_P_2_W_1): Likewise. |
| (EVEX_LEN_0F385A_P_2_W_0): Likewise. |
| (EVEX_LEN_0F385A_P_2_W_1): Likewise. |
| (EVEX_LEN_0F385B_P_2_W_0): Likewise. |
| (EVEX_LEN_0F385B_P_2_W_1): Likewise. |
| |
| 2019-06-17 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24691 |
| * i386-dis-evex.h (evex_table): Update EVEX_W_0F3A23_P_2, |
| EVEX_W_0F3A38_P_2, EVEX_W_0F3A39_P_2, EVEX_W_0F3A3A_P_2, |
| EVEX_W_0F3A3B_P_2 and EVEX_W_0F3A43_P_2. |
| (evex_len_table): Add EVEX_LEN_0F3A23_P_2_W_0, |
| EVEX_LEN_0F3A23_P_2_W_1, EVEX_LEN_0F3A38_P_2_W_0, |
| EVEX_LEN_0F3A38_P_2_W_1, EVEX_LEN_0F3A39_P_2_W_0, |
| EVEX_LEN_0F3A39_P_2_W_1, EVEX_LEN_0F3A3A_P_2_W_0, |
| EVEX_LEN_0F3A3A_P_2_W_1, EVEX_LEN_0F3A3B_P_2_W_0, |
| EVEX_LEN_0F3A3B_P_2_W_1, EVEX_LEN_0F3A43_P_2_W_0 and |
| EVEX_LEN_0F3A43_P_2_W_1. |
| * i386-dis.c (EVEX_LEN_0F3A23_P_2_W_0): New enum. |
| (EVEX_LEN_0F3A23_P_2_W_1): Likewise. |
| (EVEX_LEN_0F3A38_P_2_W_0): Likewise. |
| (EVEX_LEN_0F3A38_P_2_W_1): Likewise. |
| (EVEX_LEN_0F3A39_P_2_W_0): Likewise. |
| (EVEX_LEN_0F3A39_P_2_W_1): Likewise. |
| (EVEX_LEN_0F3A3A_P_2_W_0): Likewise. |
| (EVEX_LEN_0F3A3A_P_2_W_1): Likewise. |
| (EVEX_LEN_0F3A3B_P_2_W_0): Likewise. |
| (EVEX_LEN_0F3A3B_P_2_W_1): Likewise. |
| (EVEX_LEN_0F3A43_P_2_W_0): Likewise. |
| (EVEX_LEN_0F3A43_P_2_W_1): Likewise. |
| |
| 2019-06-14 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po; Updated French translation. |
| |
| 2019-06-13 Stafford Horne <shorne@gmail.com> |
| |
| * or1k-asm.c: Regenerated. |
| * or1k-desc.c: Regenerated. |
| * or1k-desc.h: Regenerated. |
| * or1k-dis.c: Regenerated. |
| * or1k-ibld.c: Regenerated. |
| * or1k-opc.c: Regenerated. |
| * or1k-opc.h: Regenerated. |
| * or1k-opinst.c: Regenerated. |
| |
| 2019-06-12 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <ldmx>: Delete mnemonic. |
| |
| 2019-06-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24633 |
| * i386-dis-evex.h (evex_table): Update EVEX_W_0F3A18_P_2, |
| EVEX_W_0F3A19_P_2, EVEX_W_0F3A1A_P_2 and EVEX_W_0F3A1B_P_2. |
| (evex_len_table): EVEX_LEN_0F3A18_P_2_W_0, |
| EVEX_LEN_0F3A18_P_2_W_1, EVEX_LEN_0F3A19_P_2_W_0, |
| EVEX_LEN_0F3A19_P_2_W_1, EVEX_LEN_0F3A1A_P_2_W_0, |
| EVEX_LEN_0F3A1A_P_2_W_1, EVEX_LEN_0F3A1B_P_2_W_0, |
| EVEX_LEN_0F3A1B_P_2_W_1. |
| * i386-dis.c (EVEX_LEN_0F3A18_P_2_W_0): New enum. |
| (EVEX_LEN_0F3A18_P_2_W_1): Likewise. |
| (EVEX_LEN_0F3A19_P_2_W_0): Likewise. |
| (EVEX_LEN_0F3A19_P_2_W_1): Likewise. |
| (EVEX_LEN_0F3A1A_P_2_W_0): Likewise. |
| (EVEX_LEN_0F3A1A_P_2_W_1): Likewise. |
| (EVEX_LEN_0F3A1B_P_2_W_0): Likewise. |
| (EVEX_LEN_0F3A1B_P_2_W_1): Likewise. |
| |
| 2019-06-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24626 |
| * i386-dis.c (print_insn): Check for unused VEX.vvvv and |
| EVEX.vvvv when disassembling VEX and EVEX instructions. |
| (OP_VEX): Set vex.register_specifier to 0 after readding |
| vex.register_specifier. |
| (OP_Vex_2src_1): Likewise. |
| (OP_Vex_2src_2): Likewise. |
| (OP_LWP_E): Likewise. |
| (OP_EX_Vex): Don't check vex.register_specifier. |
| (OP_XMM_Vex): Likewise. |
| |
| 2019-06-04 Igor Tsimbalist <igor.v.tsimbalist@intel.com> |
| Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c (enum): Add PREFIX_EVEX_0F3868, EVEX_W_0F3868_P_3. |
| * i386-dis-evex.h (evex_table): Add AVX512_VP2INTERSECT |
| instructions. |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512_VP2INTERSECT_FLAGS, |
| CPU_ANY_AVX512_VP2INTERSECT_FLAGS. |
| (cpu_flags): Add CpuAVX512_VP2INTERSECT. |
| * i386-opc.h (enum): Add CpuAVX512_VP2INTERSECT. |
| (i386_cpu_flags): Add cpuavx512_vp2intersect. |
| * i386-opc.tbl: Add AVX512_VP2INTERSECT insns. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2019-06-04 Xuepeng Guo <xuepeng.guo@intel.com> |
| Lili Cui <lili.cui@intel.com> |
| |
| * doc/c-i386.texi: Document enqcmd. |
| * testsuite/gas/i386/enqcmd-intel.d: New file. |
| * testsuite/gas/i386/enqcmd-inval.l: Likewise. |
| * testsuite/gas/i386/enqcmd-inval.s: Likewise. |
| * testsuite/gas/i386/enqcmd.d: Likewise. |
| * testsuite/gas/i386/enqcmd.s: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd-inval.l: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd-inval.s: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd.d: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd.s: Likewise. |
| * testsuite/gas/i386/i386.exp: Run enqcmd-intel, enqcmd-inval, |
| enqcmd, x86-64-enqcmd-intel, x86-64-enqcmd-inval, |
| and x86-64-enqcmd. |
| |
| 2019-06-04 Alan Hayward <alan.hayward@arm.com> |
| |
| * arm-dis.c (is_mve_unpredictable): Remove spurious paranthesis. |
| |
| 2019-06-03 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (prefix_opcd_indices): Correct size. |
| |
| 2019-05-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/24625 |
| * i386-opc.tbl: Add CheckRegSize to AVX512_BF16 instructions with |
| Disp8ShiftVL. |
| * i386-tbl.h: Regenerated. |
| |
| 2019-05-24 Alan Modra <amodra@gmail.com> |
| |
| * po/POTFILES.in: Regenerate. |
| |
| 2019-05-24 Peter Bergner <bergner@linux.ibm.com> |
| Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (insert_d34, extract_d34, insert_nsi34, extract_nsi34), |
| (insert_pcrel, extract_pcrel, extract_pcrel0): New functions. |
| (extract_esync, extract_raq, extract_tbr, extract_sxl): Comment. |
| (powerpc_operands <D34, SI34, NSI34, PRA0, PRAQ, PCREL, PCREL0, |
| XTOP>): Define and add entries. |
| (P8LS, PMLS, P_D_MASK, P_DRAPCREL_MASK): Define. |
| (prefix_opcodes): Add pli, paddi, pla, psubi, plwz, plbz, pstw, |
| pstb, plhz, plha, psth, plfs, plfd, pstfs, pstfd, plq, plxsd, |
| plxssp, pld, plwa, pstxsd, pstxssp, pstxv, pstd, and pstq. |
| |
| 2019-05-24 Peter Bergner <bergner@linux.ibm.com> |
| Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (ppc_opts): Add "future" entry. |
| (PREFIX_OPCD_SEGS): Define. |
| (prefix_opcd_indices): New array. |
| (disassemble_init_powerpc): Initialize prefix_opcd_indices. |
| (lookup_prefix): New function. |
| (print_insn_powerpc): Handle 64-bit prefix instructions. |
| * ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK), |
| (PMRR, POWERXX): Define. |
| (prefix_opcodes): New instruction table. |
| (prefix_num_opcodes): New constant. |
| |
| 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * configure.ac (SHARED_DEPENDENCIES): Add case for bfd_bpf_arch. |
| * configure: Regenerated. |
| * Makefile.am: Add rules for the files generated from cpu/bpf.cpu |
| and cpu/bpf.opc. |
| (HFILES): Add bpf-desc.h and bpf-opc.h. |
| (TARGET_LIBOPCODES_CFILES): Add bpf-asm.c, bpf-desc.c, bpf-dis.c, |
| bpf-ibld.c and bpf-opc.c. |
| (BPF_DEPS): Define. |
| * Makefile.in: Regenerated. |
| * disassemble.c (ARCH_bpf): Define. |
| (disassembler): Add case for bfd_arch_bpf. |
| (disassemble_init_for_target): Likewise. |
| (enum epbf_isa_attr): Define. |
| * disassemble.h: extern print_insn_bpf. |
| * bpf-asm.c: Generated. |
| * bpf-opc.h: Likewise. |
| * bpf-opc.c: Likewise. |
| * bpf-ibld.c: Likewise. |
| * bpf-dis.c: Likewise. |
| * bpf-desc.h: Likewise. |
| * bpf-desc.c: Likewise. |
| |
| 2019-05-21 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (coprocessor_opcodes): New instructions for VMRS |
| and VMSR with the new operands. |
| |
| 2019-05-21 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): New enum |
| for csinc, csinv, csneg, csel, cset, csetm, cinv, cinv |
| and cneg. |
| (mve_opcodes): New instructions as above. |
| (is_mve_encoding_conflict): Add cases for csinc, csinv, |
| csneg and csel. |
| (print_insn_mve): Accept new %<bitfield>c and %<bitfield>C. |
| |
| 2019-05-21 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (emun mve_instructions): Updated for new instructions. |
| (mve_opcodes): New instructions for asrl, lsll, lsrl, sqrshrl, |
| sqrshr, sqshl, sqshll, srshr, srshrl, uqrshll, uqrshl, uqshll, |
| uqshl, urshrl and urshr. |
| (is_mve_okay_in_it): Add new instructions to TRUE list. |
| (is_mve_unpredictable): Add cases for UNPRED_R13 and UNPRED_R15. |
| (print_insn_mve): Updated to accept new %j, |
| %<bitfield>m and %<bitfield>n patterns. |
| |
| 2019-05-21 Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Change source register |
| constraint for DAUI. |
| |
| 2019-05-20 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po: Updated French translation. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (thumb32_opcodes): Add new instructions. |
| (enum mve_instructions): Likewise. |
| (enum mve_undefined): Add new reasons. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_undefined): Likewise. |
| (print_mve_size): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (thumb32_opcodes): Add new instructions. |
| (enum mve_instructions): Likewise. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_size): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (thumb32_opcodes): Add new instructions. |
| (enum mve_instructions): Likewise. |
| (is_mve_encoding_conflict): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_size): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (thumb32_opcodes): Add new instructions. |
| (enum mve_instructions): Likewise. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_size): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (thumb32_opcodes): Add new instructions. |
| (enum mve_instructions): Likewise. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_size): Likewise. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (thumb32_opcodes): Add new instructions. |
| (print_insn_thumb32): Handle new instructions. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (enum mve_undefined): Add new reasons. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_undefined): Likewise. |
| (print_mve_size): Likewise. |
| (print_mve_shift_n): Likewise. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_rotate): Likewise. |
| (print_mve_size): Likewise. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_size): Likewise. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (enum mve_undefined): Add new reasons. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_undefined): Likewise. |
| (print_mve_size): Likewise. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_size): Likewise. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (enum mve_unpredictable): Add new reasons. |
| (enum mve_undefined): Likewise. |
| (is_mve_okay_in_it): Handle new isntructions. |
| (is_mve_encoding_conflict): Likewise. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_vmov_index): Likewise. |
| (print_simd_imm8): Likewise. |
| (print_mve_undefined): Likewise. |
| (print_mve_unpredictable): Likewise. |
| (print_mve_size): Likewise. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (enum mve_unpredictable): Add new reasons. |
| (enum mve_undefined): Likewise. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_undefined): Likewise. |
| (print_mve_unpredictable): Likewise. |
| (print_mve_rounding_mode): Likewise. |
| (print_mve_vcvt_size): Likewise. |
| (print_mve_size): Likewise. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (enum mve_unpredictable): Add new reasons. |
| (enum mve_undefined): Likewise. |
| (is_mve_undefined): Handle new instructions. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_undefined): Likewise. |
| (print_mve_unpredictable): Likewise. |
| (print_mve_size): Likewise. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (enum mve_undefined): Add new reasons. |
| (insns): Add new instructions. |
| (is_mve_encoding_conflict): |
| (print_mve_vld_str_addr): New print function. |
| (is_mve_undefined): Handle new instructions. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_undefined): Likewise. |
| (print_mve_size): Likewise. |
| (print_insn_coprocessor_1): Handle MVE VLDR, VSTR instructions. |
| (print_insn_mve): Handle new operands. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (enum mve_unpredictable): Add new reasons. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_unpredictable): Likewise. |
| (mve_opcodes): Add new instructions. |
| (print_mve_unpredictable): Handle new reasons. |
| (print_mve_register_blocks): New print function. |
| (print_mve_size): Handle new instructions. |
| (print_insn_mve): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (enum mve_unpredictable): Add new reasons. |
| (enum mve_undefined): Likewise. |
| (is_mve_encoding_conflict): Handle new instructions. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (coprocessor_opcodes): Move NEON VDUP from here... |
| (neon_opcodes): ... to here. |
| (mve_opcodes): Add new instructions. |
| (print_mve_undefined): Handle new reasons. |
| (print_mve_unpredictable): Likewise. |
| (print_mve_size): Handle new instructions. |
| (print_insn_neon): Handle vdup. |
| (print_insn_mve): Handle new operands. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): Add new instructions. |
| (enum mve_unpredictable): Add new values. |
| (mve_opcodes): Add new instructions. |
| (vec_condnames): New array with vector conditions. |
| (mve_predicatenames): New array with predicate suffixes. |
| (mve_vec_sizename): New array with vector sizes. |
| (enum vpt_pred_state): New enum with vector predication states. |
| (struct vpt_block): New struct type for vpt blocks. |
| (vpt_block_state): Global struct to keep track of state. |
| (mve_extract_pred_mask): New helper function. |
| (num_instructions_vpt_block): Likewise. |
| (mark_outside_vpt_block): Likewise. |
| (mark_inside_vpt_block): Likewise. |
| (invert_next_predicate_state): Likewise. |
| (update_next_predicate_state): Likewise. |
| (update_vpt_block_state): Likewise. |
| (is_vpt_instruction): Likewise. |
| (is_mve_encoding_conflict): Add entries for new instructions. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_unpredictable): Handle new cases. |
| (print_instruction_predicate): Likewise. |
| (print_mve_size): New function. |
| (print_vec_condition): New function. |
| (print_insn_mve): Handle vpt blocks and new print operands. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * arm-dis.c (print_insn_coprocessor_1): Disable the use of coprocessors |
| 8, 14 and 15 for Armv8.1-M Mainline. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| Michael Collison <michael.collison@arm.com> |
| |
| * arm-dis.c (enum mve_instructions): New enum. |
| (enum mve_unpredictable): Likewise. |
| (enum mve_undefined): Likewise. |
| (struct mopcode32): New struct. |
| (is_mve_okay_in_it): New function. |
| (is_mve_architecture): Likewise. |
| (arm_decode_field): Likewise. |
| (arm_decode_field_multiple): Likewise. |
| (is_mve_encoding_conflict): Likewise. |
| (is_mve_undefined): Likewise. |
| (is_mve_unpredictable): Likewise. |
| (print_mve_undefined): Likewise. |
| (print_mve_unpredictable): Likewise. |
| (print_insn_coprocessor_1): Use arm_decode_field_multiple. |
| (print_insn_mve): New function. |
| (print_insn_thumb32): Handle MVE architecture. |
| (select_arm_features): Force thumb for Armv8.1-m Mainline. |
| |
| 2019-05-10 Nick Clifton <nickc@redhat.com> |
| |
| PR 24538 |
| * ia64-opc.c (ia64_find_matching_opcode): Check for reaching the |
| end of the table prematurely. |
| |
| 2019-05-10 Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * mips-opc.c (mips_opcodes): Enable ADD, SUB, DADD and DSUB |
| macros for R6. |
| |
| 2019-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (print_insn_powerpc) Don't skip optional operands |
| when -Mraw is in effect. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-dis-2.c: Regenerate. |
| * aarch64-tbl.h (OP_SVE_BBU): New variant set. |
| (OP_SVE_BBB): New variant set. |
| (OP_SVE_DDDD): New variant set. |
| (OP_SVE_HHH): New variant set. |
| (OP_SVE_HHHU): New variant set. |
| (OP_SVE_SSS): New variant set. |
| (OP_SVE_SSSU): New variant set. |
| (OP_SVE_SHH): New variant set. |
| (OP_SVE_SBBU): New variant set. |
| (OP_SVE_DSS): New variant set. |
| (OP_SVE_DHHU): New variant set. |
| (OP_SVE_VMV_HSD_BHS): New variant set. |
| (OP_SVE_VVU_HSD_BHS): New variant set. |
| (OP_SVE_VVVU_SD_BH): New variant set. |
| (OP_SVE_VVVU_BHSD): New variant set. |
| (OP_SVE_VVV_QHD_DBS): New variant set. |
| (OP_SVE_VVV_HSD_BHS): New variant set. |
| (OP_SVE_VVV_HSD_BHS2): New variant set. |
| (OP_SVE_VVV_BHS_HSD): New variant set. |
| (OP_SVE_VV_BHS_HSD): New variant set. |
| (OP_SVE_VVV_SD): New variant set. |
| (OP_SVE_VVU_BHS_HSD): New variant set. |
| (OP_SVE_VZVV_SD): New variant set. |
| (OP_SVE_VZVV_BH): New variant set. |
| (OP_SVE_VZV_SD): New variant set. |
| (aarch64_opcode_table): Add sve2 instructions. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking |
| for SVE_SHLIMM_UNPRED_22. |
| (aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22. |
| * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22 |
| operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle |
| sve_size_tsz_bhs iclass encode. |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle |
| sve_size_tsz_bhs iclass decode. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking |
| for SVE_Zm4_11_INDEX. |
| (aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX. |
| (fields): Handle SVE_i2h field. |
| * aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field. |
| * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle |
| sve_shift_tsz_bhsd iclass encode. |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle |
| sve_shift_tsz_bhsd iclass decode. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| * aarch64-asm.c (aarch64_ins_sve_shrimm): |
| (aarch64_encode_variant_using_iclass): Handle |
| sve_shift_tsz_hsd iclass encode. |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle |
| sve_shift_tsz_hsd iclass decode. |
| * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking |
| for SVE_SHRIMM_UNPRED_22. |
| (aarch64_print_operand): Add printing for SVE_SHRIMM_UNPRED_22. |
| * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHRIMM_UNPRED_22 |
| operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle |
| sve_size_013 iclass encode. |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle |
| sve_size_013 iclass decode. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle |
| sve_size_bh iclass encode. |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle |
| sve_size_bh iclass decode. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle |
| sve_size_sd2 iclass encode. |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle |
| sve_size_sd2 iclass decode. |
| * aarch64-opc.c (fields): Handle SVE_sz2 field. |
| * aarch64-opc.h (enum aarch64_field_kind): New SVE_sz2 field. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking |
| for SVE_ADDR_ZX. |
| (aarch64_print_operand): Add printing for SVE_ADDR_ZX. |
| * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_ADDR_ZX operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking |
| for SVE_Zm3_11_INDEX. |
| (aarch64_print_operand): Add printing for SVE_Zm3_11_INDEX. |
| (fields): Handle SVE_i3l and SVE_i3h2 fields. |
| * aarch64-opc.h (enum aarch64_field_kind): New SVE_i3l and SVE_i3h2 |
| fields. |
| * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm3_11_INDEX operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle |
| sve_size_hsd2 iclass encode. |
| * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle |
| sve_size_hsd2 iclass decode. |
| * aarch64-opc.c (fields): Handle SVE_size field. |
| * aarch64-opc.h (enum aarch64_field_kind): New SVE_size field. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking |
| for SVE_IMM_ROT3. |
| (aarch64_print_operand): Add printing for SVE_IMM_ROT3. |
| (fields): Handle SVE_rot3 field. |
| * aarch64-opc.h (enum aarch64_field_kind): New SVE_rot3 field. |
| * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_IMM_ROT3 operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-opc.c (verify_constraints): Check for movprfx for sve2 |
| instructions. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * aarch64-tbl.h |
| (aarch64_feature_sve2, aarch64_feature_sve2aes, |
| aarch64_feature_sve2sha3, aarch64_feature_sve2sm4, |
| aarch64_feature_sve2bitperm): New feature sets. |
| (SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros |
| for feature set addresses. |
| (SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN, |
| SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros. |
| |
| 2019-05-06 Andrew Bennett <andrew.bennett@imgtec.com> |
| Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * mips-dis.c (mips_calculate_combination_ases): Add ISA |
| argument and set ASE_EVA_R6 appropriately. |
| (set_default_mips_dis_options): Pass ISA to above. |
| (parse_mips_dis_option): Likewise. |
| * mips-opc.c (EVAR6): New macro. |
| (mips_builtin_opcodes): Add llwpe, scwpe. |
| |
| 2019-05-01 Sudakshina Das <sudi.das@arm.com> |
| |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| * aarch64-opc.c (operand_general_constraint_met_p): Add case for |
| AARCH64_OPND_TME_UIMM16. |
| (aarch64_print_operand): Likewise. |
| * aarch64-tbl.h (QL_IMM_NIL): New. |
| (TME): New. |
| (_TME_INSN): New. |
| (struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel. |
| |
| 2019-04-29 John Darrington <john@darrington.wattle.id.au> |
| |
| * s12z-opc.c (shift_discrim): Return OP_INVALID when reading fails. |
| |
| 2019-04-26 Andrew Bennett <andrew.bennett@imgtec.com> |
| Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Add llwp, lldp, scwp, scdp. |
| |
| 2019-04-24 John Darrington <john@darrington.wattle.id.au> |
| |
| * s12z-opc.h: Add extern "C" bracketing to help |
| users who wish to use this interface in c++ code. |
| |
| 2019-04-24 John Darrington <john@darrington.wattle.id.au> |
| |
| * s12z-opc.c (bm_decode): Handle bit map operations with the |
| "reserved0" mode. |
| |
| 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * arm-dis.c (coprocessor_opcodes): Document new %J and %K format |
| specifier. Add entries for VLDR and VSTR of system registers. |
| (print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in |
| coprocessor instructions on Armv8.1-M Mainline targets. Add handling |
| of %J and %K format specifier. |
| |
| 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * arm-dis.c (coprocessor_opcodes): Document new %C format control code. |
| Add new entries for VSCCLRM instruction. |
| (print_insn_coprocessor): Handle new %C format control code. |
| |
| 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * arm-dis.c (enum isa): New enum. |
| (struct sopcode32): New structure. |
| (coprocessor_opcodes): change type of entries to struct sopcode32 and |
| set isa field of all current entries to ANY. |
| (print_insn_coprocessor): Change type of insn to struct sopcode32. |
| Only match an entry if its isa field allows the current mode. |
| |
| 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * arm-dis.c (thumb_opcodes): Document %n control code. Add entry for |
| CLRM. |
| (print_insn_thumb32): Add logic to print %n CLRM register list. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (print_insn_thumb32): Updated to accept new %P |
| and %Q patterns. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (thumb32_opcodes): New instruction bfcsel. |
| (print_insn_thumb32): Edit the switch case for %Z. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (print_insn_thumb32): Updated to accept new %Z pattern. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (thumb32_opcodes): New instruction bfl. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (print_insn_thumb32): Updated to accept new %Y pattern. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (print_insn_thumb32): Add '%<bitfield>S' to print an |
| Arm register with r13 and r15 unpredictable. |
| (thumb32_opcodes): New instructions for bfx and bflx. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (thumb32_opcodes): New instructions for bf. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (print_insn_thumb32): Updated to accept new %W pattern. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * arm-dis.c (print_insn_thumb32): Updated to accept new %G pattern. |
| |
| 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline. |
| |
| 2019-04-12 John Darrington <john@darrington.wattle.id.au> |
| |
| s12z-dis.c, s12z-opc.c, s12z-opc.h: Replace "operator" with |
| "optr". ("operator" is a reserved word in c++). |
| |
| 2019-04-11 Sudakshina Das <sudi.das@arm.com> |
| |
| * aarch64-opc.c (aarch64_print_operand): Add case for |
| AARCH64_OPND_Rt_SP. |
| (verify_constraints): Likewise. |
| * aarch64-tbl.h (QL_LDST_AT): Update to add SP qualifier. |
| (struct aarch64_opcode): Update stg, stzg, st2g, stz2g instructions |
| to accept Rt|SP as first operand. |
| (AARCH64_OPERANDS): Add new Rt_SP. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2019-04-11 Sudakshina Das <sudi.das@arm.com> |
| |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Likewise. |
| * aarch64-opc-2.c: Likewise. |
| * aarch64-tbl.h (aarch64_opcode): Add new ldgm and stgm. |
| |
| 2019-04-09 Robert Suchanek <robert.suchanek@mips.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Add RDHWR rt rd sel. |
| |
| 2019-04-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.tbl: Consolidate AVX512 BF16 entries. |
| * i386-init.h: Regenerated. |
| |
| 2019-04-07 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (print_insn_powerpc): Use a tiny state machine |
| op_separator to control printing of spaces, comma and parens |
| rather than need_comma, need_paren and spaces vars. |
| |
| 2019-04-07 Alan Modra <amodra@gmail.com> |
| |
| PR 24421 |
| * arm-dis.c (print_insn_coprocessor): Correct bracket placement. |
| (print_insn_neon, print_insn_arm): Likewise. |
| |
| 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> |
| |
| * i386-dis-evex.h (evex_table): Updated to support BF16 |
| instructions. |
| * i386-dis.c (enum): Add EVEX_W_0F3852_P_1, EVEX_W_0F3872_P_1 |
| and EVEX_W_0F3872_P_3. |
| * i386-gen.c (cpu_flag_init): Add CPU_AVX512_BF16_FLAGS. |
| (cpu_flags): Add bitfield for CpuAVX512_BF16. |
| * i386-opc.h (enum): Add CpuAVX512_BF16. |
| (i386_cpu_flags): Add bitfield for cpuavx512_bf16. |
| * i386-opc.tbl: Add AVX512 BF16 instructions. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2019-04-05 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (XLBH_MASK): Subtract off BH field from BB_MASK. |
| (powerpc_opcodes): Reorder bcctr and bclr extended mnemonics |
| to favour printing of "-" branch hint when using the "y" bit. |
| Allow BH field on bc{ctr,lr,tar}{,l}{-,+}. |
| |
| 2019-04-05 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (print_insn_powerpc): Delay printing spaces after |
| opcode until first operand is output. |
| |
| 2019-04-04 Peter Bergner <bergner@linux.ibm.com> |
| |
| PR gas/24349 |
| * ppc-opc.c (valid_bo_pre_v2): Add comments. |
| (valid_bo_post_v2): Add support for 'at' branch hints. |
| (insert_bo): Only error on branch on ctr. |
| (get_bo_hint_mask): New function. |
| (insert_boe): Add new 'branch_taken' formal argument. Add support |
| for inserting 'at' branch hints. |
| (extract_boe): Add new 'branch_taken' formal argument. Add support |
| for extracting 'at' branch hints. |
| (insert_bom, extract_bom, insert_bop, extract_bop): New functions. |
| (BOE): Delete operand. |
| (BOM, BOP): New operands. |
| (RM): Update value. |
| (XLYLK, XLYLK_MASK, XLYBB_MASK): Delete. |
| (powerpc_opcodes) <bc-, bcl-, bca-, bcla-, bclr-, bclrl-, bcctr-, |
| bcctrl-, bctar-, bctarl->: Replace BOE with BOM. |
| (powerpc_opcodes) <bc+, bcl+, bca+, bcla+, bclr+, bclrl+, bcctr+, |
| bcctrl+, bctar+, bctarl+>: Replace BOE with BOP. |
| <bdnztar, bdnztarl, bdztar, bdztarl, btar, btarl, bdnztar-, bdnztarl-, |
| bdnztar+, bdnztarl+, bdztar-, bdztarl-, bdztar+, bdztarl+, bgetar, |
| bnltar, bgetarl, bnltarl, bletar, bngtar, bletarl, bngtarl, bnetar, |
| bnetarl, bnstar, bnutar, bnstarl, bnutarl, bgetar-, bnltar-, bgetarl-, |
| bnltarl-, bletar-, bngtar-, bletarl-, bngtarl-, bnetar-, bnetarl-, |
| bnstar-, bnutar-, bnstarl-, bnutarl-, bgetar+, bnltar+, bgetarl+, |
| bnltarl+, bletar+, bngtar+, bletarl+, bngtarl+, bnetar+, bnetarl+, |
| bnstar+, bnutar+, bnstarl+, bnutarl+, blttar, blttarl, bgttar, bgttarl, |
| beqtar, beqtarl, bsotar, buntar, bsotarl, buntarl, blttar-, blttarl-, |
| bgttar-, bgttarl-, beqtar-, beqtarl-, bsotar-, buntar-, bsotarl-, |
| buntarl-, blttar+, blttarl+, bgttar+, bgttarl+, beqtar+, beqtarl+, |
| bsotar+, buntar+, bsotarl+, buntarl+, bdnzftar, bdnzftarl, bdzftar, |
| bdzftarl, bftar, bftarl, bftar-, bftarl-, bftar+, bftarl+, bdnzttar, |
| bdnzttarl, bdzttar, bdzttarl, bttar, bttarl, bttar-, bttarl-, bttar+, |
| bttarl+>: New extended mnemonics. |
| |
| 2019-03-28 Alan Modra <amodra@gmail.com> |
| |
| PR 24390 |
| * ppc-opc.c (BTF): Define. |
| (powerpc_opcodes): Use for mtfsb*. |
| * ppc-dis.c (print_insn_powerpc): Print fields with both |
| PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number. |
| |
| 2019-03-25 Tamar Christina <tamar.christina@arm.com> |
| |
| * arm-dis.c (struct arm_private_data): Remove has_mapping_symbols. |
| (mapping_symbol_for_insn): Implement new algorithm. |
| (print_insn): Remove duplicate code. |
| |
| 2019-03-25 Tamar Christina <tamar.christina@arm.com> |
| |
| * aarch64-dis.c (print_insn_aarch64): |
| Implement override. |
| |
| 2019-03-25 Tamar Christina <tamar.christina@arm.com> |
| |
| * aarch64-dis.c (print_insn_aarch64): Update the mapping symbol search |
| order. |
| |
| 2019-03-25 Tamar Christina <tamar.christina@arm.com> |
| |
| * aarch64-dis.c (last_stop_offset): New. |
| (print_insn_aarch64): Use stop_offset. |
| |
| 2019-03-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/24359 |
| * i386-gen.c (cpu_flag_init): Add CPU_ANY_AVX512F_FLAGS to |
| CPU_ANY_AVX2_FLAGS. |
| * i386-init.h: Regenerated. |
| |
| 2019-03-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/24348 |
| * i386-opc.tbl: Add Optimize to vmovdqa32, vmovdqa64, vmovdqu8, |
| vmovdqu16, vmovdqu32 and vmovdqu64. |
| * i386-tbl.h: Regenerated. |
| |
| 2019-03-12 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * s390-opc.txt: Rename selhhhr to selfhr. Remove optional operand |
| from vstrszb, vstrszh, and vstrszf. |
| |
| 2019-03-12 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * s390-opc.txt: Add instruction descriptions. |
| |
| 2019-02-08 Jim Wilson <jimw@sifive.com> |
| |
| * riscv-opc.c (riscv_opcodes) <beq>: Use Cz to compress 3 operand form. |
| <bne>: Likewise. |
| |
| 2019-02-07 Tamar Christina <tamar.christina@arm.com> |
| |
| * arm-dis.c (arm_opcodes): Redefine hlt to armv1. |
| |
| 2019-02-07 Tamar Christina <tamar.christina@arm.com> |
| |
| PR binutils/23212 |
| * aarch64-opc.h (enum aarch64_field_kind): Add FLD_sz. |
| * aarch64-opc.c (verify_elem_sd): New. |
| (fields): Add FLD_sz entr. |
| * aarch64-tbl.h (_SIMD_INSN): New. |
| (aarch64_opcode_table): Add elem_sd verifier to fmla, fmls, fmul and |
| fmulx scalar and vector by element isns. |
| |
| 2019-02-07 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated Swedish translation. |
| |
| 2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * s390-mkopc.c (main): Accept arch13 as cpu string. |
| * s390-opc.c: Add new instruction formats and instruction opcode |
| masks. |
| * s390-opc.txt: Add new arch13 instructions. |
| |
| 2019-01-25 Sudakshina Das <sudi.das@arm.com> |
| |
| * aarch64-tbl.h (QL_LDST_AT): Update macro. |
| (aarch64_opcode): Change encoding for stg, stzg |
| st2g and st2zg. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2019-01-25 Sudakshina Das <sudi.das@arm.com> |
| |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Likewise. |
| * aarch64-opc-2.c: Likewise. |
| * aarch64-tbl.h (aarch64_opcode): Add new stzgm. |
| |
| 2019-01-25 Sudakshina Das <sudi.das@arm.com> |
| Ramana Radhakrishnan <ramana.radhakrishnan@arm.com> |
| |
| * aarch64-asm.c (aarch64_ins_addr_simple_2): Remove. |
| * aarch64-asm.h (ins_addr_simple_2): Likeiwse. |
| * aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise. |
| * aarch64-dis.h (ext_addr_simple_2): Likewise. |
| * aarch64-opc.c (operand_general_constraint_met_p): Remove |
| case for ldstgv_indexed. |
| (aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2. |
| * aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv. |
| (AARCH64_OPERANDS): Remove ADDR_SIMPLE_2. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2019-01-23 Nick Clifton <nickc@redhat.com> |
| |
| * po/pt_BR.po: Updated Brazilian Portuguese translation. |
| |
| 2019-01-21 Nick Clifton <nickc@redhat.com> |
| |
| * po/de.po: Updated German translation. |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2019-01-20 Chenghua Xu <paul.hua.gm@gmail.com> |
| * mips-dis.c (mips_arch_choices): Fix typo in |
| gs464, gs464e and gs264e descriptors. |
| |
| 2019-01-19 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2018-06-24 Nick Clifton <nickc@redhat.com> |
| |
| 2.32 branch created. |
| |
| 2019-01-09 John Darrington <john@darrington.wattle.id.au> |
| |
| * s12z-dis.c (print_insn_s12z): Do not dereference an operand |
| if it is null. |
| -dis.c (opr_emit_disassembly): Do not omit an index if it is |
| zero. |
| |
| 2019-01-09 Andrew Paprocki <andrew@ishiboo.com> |
| |
| * configure: Regenerate. |
| |
| 2019-01-07 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2019-01-03 John Darrington <john@darrington.wattle.id.au> |
| |
| * s12z-opc.c: New file. |
| * s12z-opc.h: New file. |
| * s12z-dis.c: Removed all code not directly related to display |
| of instructions. Used the interface provided by the new files |
| instead. |
| * Makefile.am (TARGET_LIBOPCODES_CFILES) Add s12z-opc.c. |
| * Makefile.in: Regenerate. |
| * configure.ac (bfd_s12z_arch): Correct the dependencies. |
| * configure: Regenerate. |
| |
| 2019-01-01 Alan Modra <amodra@gmail.com> |
| |
| Update year range in copyright notice of all files. |
| |
| For older changes see ChangeLog-2018 |
| |
| Copyright (C) 2019 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |