| 2005-11-08 Kunal Parmar <kunal.parmar@codito.com> |
| |
| * arcgdbserverusinggdbserver.exp: Is a duplicate of |
| lib/arc-gdbserver.exp. Remove it. |
| * lib/arc-jtag.exp: Remove hardcoded compiler, assembler, etc. Use |
| environment variables instead. |
| * lib/arc-gdbserver.exp: Ditto. Disallow fileio tests. Use default |
| timeout. |
| * config/remote-gdbserver.exp (rsh_gdbserver_spawn): Expect output |
| from the spawned rsh program. Check for errors. Return -1 on |
| error. |
| (gdbserver_spawn): Return spawn_id. |
| (gdb_load): Check the returned spawn_id from gdbserver_spawn and |
| return -1 on error. Remove sleep and expect output from the |
| spawned process instead. Do a wait on the spawned process after it |
| finishes. |
| * lib/mi-support.exp (gdb_load): Ditto. |
| |
| 2005-10-31 Kunal Parmar <kunal.parmar@codito.com> |
| |
| * gdb.asm/asm-source.exp: Add linker flag -marclinux for target arc. |
| |
| 2005-10-24 Kunal Parmar <kunal.parmar@codito.com> |
| |
| * gdb.asm/asm-source.exp: Set debug-flags to -gdwarf-2 for target arc. |
| |
| 2005-10-21 Kunal Parmar <kunal.parmar@codito.com> |
| |
| * gdb.asm/arc.inc: Define macro's declare and end. |
| |
| 2005-10-18 Kunal Parmar <kunal.parmar@codito.com> |
| |
| Bug #1183 |
| * lib/mi-support.exp (mi_gdb_load): Add support for target |
| remote. Fix for Bug #1183 (Testsuite does not complete for |
| gdb.mi). |
| |
| 2005-10-14 Kunal Parmar <kunal.parmar@codito.com> |
| |
| * config/remote-gdbserver.exp (gdb_load): Check the return value |
| from gdb_target_cmd. Retry on failure. |
| |
| 2005-09-28 Kunal Parmar <kunal.parmar@codito.com> |
| |
| * lib/arc-jtag.exp: Skip the huge.exp test. |
| |
| 2005-09-28 Kunal Parmar <kunal.parmar@codito.com> |
| |
| Bug #1183 |
| * lib/mi-support.exp (mi_gdb_load): Add support for target |
| arcjtag. Fix for Bug #1183 (Testsuite does not complete for |
| gdb.mi). |
| |
| 2005-09-23 Kunal Parmar <kunal.parmar@codito.com> |
| |
| * config/arc-jtag.exp: Take care about timeouts. Kill previous |
| program being debugged after doing arc-reset-board. |
| * lib/arc-jtag.exp: Add board_info to disallow unsupported tests. |
| Add board_info for arcjtag as gdb_protocol. |
| |
| 2005-05-20 Soam Vasani <soam.vasani@codito.com> |
| |
| * gdb.arch/arc-step-jtag.s: Define "main" label. |
| * gdb.arch/arc-step.s: Ditto. |
| |
| 2005-05-15 Soam Vasani <soam.vasani@codito.com> |
| |
| * gdb.arch/arc-step-jtag.exp: Check gdb_load's return value. |
| |
| 2005-05-15 Soam Vasani <soam.vasani@codito.com> |
| |
| * config/arc-jtag.exp (gdb_target_arcjtag): Increase timeout. |
| Kill previous program being debugged. Return zero on success, |
| non-zero otherwise. |
| (gdb_load): Check return value of gdb_target_arcjtag. Return zero |
| on success, non-zero otherwise. |
| |
| 2005-05-14 Soam Vasani <soam.vasani@codito.com> |
| |
| * gdb.arch/arc-step-jtag.exp: Oops. Use arc-step-jtag.s, not |
| arc-step.s. |
| |
| 2005-05-14 Soam Vasani <soam.vasani@codito.com> |
| |
| * gdb.arch/arc-step-jtag.exp: New file for the JTAG target. |
| * arc-step-jtag.s: New file, derived from arc-step.s: added labels |
| in delay slots and ended using "flag 1" |
| (JTAG uses hardware single step which can step thru delay slots, |
| unlike software single step.) |
| * gdb.arch/arc-step.exp: Quit if not on linux. |
| |
| 2005-05-14 Soam Vasani <soam.vasani@codito.com> |
| |
| * config/arc-jtag.exp (gdb_target_arcjtag): If target arcjtag |
| fails, once do arc-reset-board and try again. |
| |
| 2005-05-12 Ramana Radhakrishnan <ramana@codito.com> |
| |
| * lib/gdbserver.exp: Use a special tests dir for specifying |
| the tests directory where the tests have been downloaded. |
| * arcgdbserverusinggdbserver.exp: Use this to run the testsuite. |
| |
| 2005-05-04 Soam Vasani <soam.vasani@codito.com> |
| |
| * config/arc-jtag.exp: Target-specific file for the arcjtag target. |
| * lib/arc-jtag.exp: Baseboard file for arcjtag target. (No real |
| reason to put it in this directory, but...) |
| |
| 2005-04-13 Soam Vasani <soam.vasani@codito.com> |
| |
| * gdb.arch/arc-step.exp: Tests for software single step across |
| 32 bit / 16bit instructions, branches with/without delay slots, |
| and zero-overhead-loops. |
| * gdb.arch/arc-step.s: Ditto. |
| |
| 2005-04-11 Soam Vasani <soam.vasani@codito.com> |
| |
| * gdb.threads/thread_check.exp: Applied |
| http://sources.redhat.com/ml/gdb-patches/2004-11/msg00458.html, |
| which corrects the filename and the regexp. |
| |
| 2005-04-08 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com> |
| |
| * gdb.base/float.exp: Add support for the ARC platform. |
| |
| 2005-03-30 Soam Vasani <soam.vasani@codito.com> |
| |
| * config/remote-gdbserver.exp (rsh_gdbserver_spawn): Find RSH. |
| * lib/arc-gdbserver.exp: Use rsh instead of telnet. |
| |
| 2005-03-21 Soam Vasani <soam.vasani@codito.com> |
| |
| * config/remote-gdbserver.exp (mynewtelnet_open_and_exec): Assume |
| that telnet-exec.exp is in the path; do not hardcode the path. |
| * lib/arc-gdbserver.exp: Remove hardcoded paths, port numbers, |
| etc. Use environment variables instead. |
| |
| 2005-03-15 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com> |
| |
| * config/remote-gdbserver.exp: New file for nfs copying |
| * gdb.asm/arc.inc: New file for assembly language testing |
| * gdb.asm/asm-source.exp: Handle the arc architecture. |
| * lib/telnet-exec.exp: A replacement for rsh using telnet to allow |
| executing commands on the arc board. Used while testing |
| gdbserver on ARC700. |
| * lib/arc-gdbserver.exp: A setup for running the testsuite |
| using arc-gdbserver. Should be a part of the dejagnu |
| distribution but is kept here for convinience. Tailor this |
| for use. (Store usually in /usr/share/dejagnu/baseboards directory) |
| |
| |
