| 2001-06-11 Alan Modra <amodra@bigpond.net.au> |
| |
| Merge from mainline. |
| 2001-06-07 H.J. Lu <hjl@gnu.org> |
| * binutils-all/readelf.ss-mips: Support stabs. |
| * binutils-all/readelf.ss-tmips: Likewise. |
| |
| 2001-05-25 H.J. Lu <hjl@gnu.org> |
| * binutils-all/readelf.exp (readelf_test): Set target_machine |
| to tmips for traditional mips. |
| * binutils-all/readelf.s: Support traditional mips. |
| * binutils-all/readelf.ss-tmips: New for traditional mips. |
| |
| 2001-05-25 Alan Modra <amodra@one.net.au> |
| * binutils-all/readelf.exp: Replace linuxoldld with linux*oldld |
| and linuxaout with linux*aout. |
| * binutils-all/objcopy.exp: Remove xfail for linuxaout. |
| |
| 2001-03-30 H.J. Lu <hjl@gnu.org> |
| * binutils-all/readelf.exp: Run on more ELF targets. |
| |
| 2001-02-11 H.J. Lu <hjl@gnu.org> |
| * config/default.exp: Set up gcc_gas_flag. |
| * binutils-all/objcopy.exp (copy_setup): Process gcc_gas_flag |
| for Linux only. |
| * binutils-all/testprog.c: Include <string.h> and don't use |
| exit (). |
| |
| 2001-06-07 Alan Modra <amodra@bigpond.net.au> |
| |
| * (binutils-all/ar.exp, binutils-all/nm.exp, |
| binutils-all/objcopy.exp, binutils-all/objdump.exp, |
| binutils-all/readelf.exp, binutils-all/size.exp, |
| binutils-all/hppa/objdump.exp, config/default.exp, |
| lib/utils-lib.exp): Update copyright notices. |
| |
| 2001-01-16 Matthew Green <mrg@redhat.com> |
| |
| * binutils-all/readelf.s-64: Match readelf -S output. |
| |
| 2000-12-09 Nick Clifton <nickc@redhat.com> |
| |
| * binutils-all/objdump.exp (cpus_expected): Add tic54x and |
| tms320c54x. |
| |
| 2000-11-28 Hans-Peter Nilsson <hp@axis.com> |
| |
| * binutils-all/readelf.s: Adjust to readelf.c formatting changes. |
| |
| 2000-11-02 Chris Demetriou <cgd@sibyte.com> |
| |
| * binutils-all/readelf.exp (regexp_diff): Add code |
| from gas testsuite to treat "#..." at beginning of line |
| as an indicator to skip extra non-matching lines at that |
| location. |
| (readelf_test): Add support for using a machine-specific |
| regexp comparison file. |
| (readelf -S test, readelf -s test): Remove v850*-*-* and |
| mips*-*-* from list of expected failures. |
| * binutils-all/readelf.s: Accomodate changes due to |
| additional sections (and therefore section numbering |
| differences) on v850*-*-* and mips*-*-* targets. |
| * binutils-all/readelf.ss: Likewise. |
| * binutils-all/readelf.ss-mips: New file, which matches |
| expected output of readelf -s test for mips*-*-*. |
| |
| 2000-10-25 Hans-Peter Nilsson <hp@axis.com> |
| |
| * binutils-all/readelf.exp (-wi test): Add cris-*-* to xfails. |
| |
| 2000-10-19 Chris Demetriou <cgd@sibyte.com> |
| |
| * binutils-all/readelf.exp (readelf_test): Work properly |
| when multiple targets expect failtures. |
| (readelf -S test, readelf -s test): Expect mips*-*-* |
| to fail. |
| |
| 2000-07-10 Alan Modra <alan@linuxcare.com.au> |
| |
| * lib/utils-lib.exp (default_binutils_assemble): Don't do the hppa |
| sed fudges for hppa-linux. |
| |
| 2000-07-01 Frank Ch. Eigler <fche@redhat.com> |
| |
| * binutils-all/objdump.exp (cpus_expected, cpus_regex): Reorganize |
| syntax to display more tcl nature. |
| |
| 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr> |
| |
| * binutils-all/objdump.exp (cpus_expected): Recognize m68hc11 and |
| m68hc12. |
| |
| 2000-06-18 Nick Clifton <nickc@redhat.com> |
| |
| * binutils-all/readelf.wi: Do not assume the compilation tag to be |
| unit 1. |
| |
| * binutils-all/objcopy.exp: Expect all arm variants to fail the |
| copying executable test. |
| |
| 2000-06-14 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * binutils-all/readelf.exp (regexp_diff): Do not break when a |
| mismatching line is found. |
| (readelf_find_size): New. |
| (readelf_size): New global variable. |
| (readelf_test): Add newline to send_log of command. |
| If $srcdir/$subdir/$regexp_file-$readelf_size exists, use it |
| instead of $srcdir/$subdir/$regexp_file. |
| (*-*elf test): Fix typo in message. |
| * binutils-all/readelf.s-64: New. |
| * binutils-all/readelf.ss-64: New. |
| |
| 2000-05-02 Alan Modra <alan@linuxcare.com.au> |
| |
| * binutils-all/objcopy.exp (simple copy): Clear xfail for hppa-linux. |
| |
| * binutils-all/hppa/objdump.exp: Disable test for elf. |
| |
| 2000-03-13 Nick Clifton <nickc@cygnus.com> |
| |
| * binutils-all/readelf.s: Adjust to match new format of readelf |
| output. |
| * binutils-all/readelf.ss: Adjust to match new format of readelf |
| output. |
| |
| 1999-11-01 Nick Clifton <nickc@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Expect simple objcopy test to fail |
| for COFF based ARM and Thumb ports. |
| |
| Tue Sep 14 00:28:17 1999 Jeffrey A Law (law@cygnus.com) |
| |
| * binutils-all/hppa/objdump.exp: Do not run for PA64. |
| |
| 1999-09-04 Steve Chamberlain <sac@pobox.com> |
| |
| * binutils-all/objdump.exp: Add pj to cpus_expected. |
| |
| Sat Aug 28 00:24:27 1999 Jerry Quinn <jquinn@nortelnetworks.com> |
| |
| * binutils-all/hppa/freg.s: New file. |
| * binutils-all/hppa/objdump.exp: Add freg.s test. |
| |
| 1999-08-09 Ian Lance Taylor <ian@zembu.com> |
| |
| * binutils-all/objcopy.exp: Add setup_xfail for simple copy test |
| for i*86-*-msdos*. |
| |
| 1999-07-21 H.J. Lu <hjl@gnu.org> |
| |
| * binutils-all/testprog.c: Include <stdio.h>. |
| |
| 1999-06-29 Nick Clifton <nickc@cygnus.com> |
| |
| * binutils-all/objdump.exp: Add fr30 and MCore to expected cpus |
| list. |
| |
| * binutils-all/readelf.r: Do not assume a fixed number of spaces |
| in the output. |
| |
| 1999-06-10 Nick Clifton <nickc@cygnus.com> |
| |
| * binutils-all/readelf.wi: Update to match latest output. |
| * binutils-all/readelf.h: Update to match latest output. |
| |
| Wed Jun 9 11:59:22 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de> |
| |
| * binutils-all/objdump.exp: Tighten regexp to match `objdump -i' |
| output to avoid massive exponential behaviour. |
| |
| 1999-05-28 Ian Lance Taylor <ian@zembu.com> |
| |
| * binutils-all/readelf.h: Update for changes of 1999-04-08. |
| |
| 1999-03-12 Nick Clifton <nickc@cygnus.com> |
| |
| * binutils-all/readelf.wi: Remove FR30 specific components. |
| * binutils-all/readelf.s: Remove RELA specific components. |
| |
| 1999-02-16 Nick Clifton <nickc@cygnus.com> |
| |
| * binutils-all/readelf.s: Do not assume section alignment is 4. |
| * binutils-all/readelf.r: Do not assume rela's are being used. |
| * binutils-all/readelf.exp: disable tests for non ELF based |
| targets. |
| |
| 1999-02-02 Nick Clifton <nickc@cygnus.com> |
| |
| * binutils-all/readelf.wi: Amend to match new readelf output. |
| * binutils-all/readelf.r: Do not assume that RELAs will be used. |
| |
| 1999-01-29 Nick Clifton <nickc@cygnus.com> |
| |
| * config/default.exp: Add definitions of READELF and READELFFLAGS. |
| |
| * binutils-all/readelf.exp: New file: Readelf tests |
| * binutils-all/readelf.h: New file: Expected results for 'readelf -h' |
| * binutils-all/readelf.s: New file: Expected results for 'readelf -S' |
| * binutils-all/readelf.ss: New file: Expected results for 'readelf -s' |
| * binutils-all/readelf.r: New file: Expected results for 'readelf -r' |
| * binutils-all/readelf.wi: New file: Expected results for 'readelf -wi' |
| |
| Wed Dec 9 19:11:39 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * binutils-all/objcopy.exp (copy_executable): Expect comparison |
| failure for mips*-*-elf. |
| |
| Fri Oct 16 22:57:12 1998 Felix Lee <flee@cygnus.com> |
| |
| * binutils-all/objcopy.exp: fix "no symbols" message. |
| |
| Tue Jul 28 15:14:04 1998 Jeffrey A Law (law@cygnus.com) |
| |
| * binutils-all/objcopy.exp: Keep "main" and "_main" for strip with |
| saving symbol tests. Look for either "main" or "_main" in the output |
| file. Fix test for "no symbols" in the output file. |
| |
| 1998-07-22 Vladimir N. Makarov <vmakarov@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Polish output about fail for objcopy |
| (simple copy), strip with/without saving a symbol for object file |
| and executable. |
| |
| Wed Jul 1 16:27:40 1998 Nick Clifton <nickc@cygnus.com> |
| |
| * binutils-all/objcopy.exp: ARM simple objcopy now passes. |
| |
| Wed Jun 24 09:20:21 1998 Nick Clifton <nickc@cygnus.com> |
| |
| * binutils-all/objdump.exp: Look for '.data' rather than 'data' |
| when parsing output of objdump -h. |
| * binutils-all/size.exp: Look for '.data' rather than 'data' when |
| parsing output of size -A. |
| |
| 1998-07-20 Vladimir N. Makarov <vmakarov@cygnus.com> |
| |
| * objcopy.exp: Two new tests - strip object file with saving a |
| symbol and strip executable file with saving a symbol. |
| |
| Fri May 29 14:50:24 1998 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Don't xfail the simple objcopy test |
| when cross compiling. |
| |
| Thu Nov 6 14:32:37 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * lib/utils-lib.exp: Temporary definition of target_assemble and |
| default_target_assemble so that testing can work with older |
| dejagnu versions. |
| |
| Wed Sep 24 12:09:15 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * binutils-all/objcopy.exp(strip_executable): Make a new copy of |
| the executable being tested. |
| |
| Mon Sep 15 21:25:20 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * binutils-all/objcopy.exp: Compile the executables to be tested |
| on the target with a status wrapper (as necessary). |
| |
| * binutils-all/ar.exp: If testing on a remote host, don't bother |
| looking on the local host for the program being tested. Use the |
| correct filenames on the remote host. |
| |
| * binutils-all/nm.exp: Ditto. |
| |
| * binutils-all/size.exp: Ditto. |
| |
| * binutils-all/objdump.exp: Ditto. |
| (cpus_expected): Add the target CPU to the regexp of CPUs to be |
| expected, if it's not already there. |
| |
| Thu Aug 28 09:57:27 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * binutils-all/objdump.exp (cpus_expected): Add arc. |
| |
| Tue Aug 5 00:03:20 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * config/default.exp: Look for nm-new and strip-new. |
| |
| Tue Jun 3 17:12:54 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * config/default.exp: Remove expect_before statement. |
| |
| * binutils-all/objcopy.exp: Don't use global exec_output variable; |
| the output is returned from remote_load instead. |
| |
| Mon May 12 22:14:20 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * binutils-all/objcopy.exp(strip_test): Tests that |
| fail to compile are untested, not unresolved. |
| (copy_setup): Ditto. |
| |
| * lib/utils-lib.exp(default_binutils_assemble): Call |
| target_assemble instead of target_compile. |
| |
| Wed Apr 30 20:37:51 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| Changes to support multilib and remote hosted testing, along with |
| general cleanups and simplifications. |
| |
| * lib/utils-lib.exp(binutil_version): Use remote_exec. |
| (default_binutils_run): Ditto. |
| (default_binutils_assemble): Remove first argument; call |
| target_compile to actually do the assembly. |
| (default_binutils_compile,default_binutils_remove,prune_warnings): |
| Delete. |
| |
| * config/default.exp: Remove AS and ASFLAGS. |
| (binutils_compile,binutils_remove): Delete. |
| (binutils_assemble): Remove first argument. |
| |
| * binutils-all/ar.exp: See if we're running the tests on |
| a remote host, and download/upload files as appropriate. |
| Replace calls to binutils_remove with remote_file. Replace |
| calls to binutils_compile with target_compile. Remove initial |
| argument to binutils_assemble. Use remote_load to execute |
| programs on the target. |
| * binutils-all/nm.exp: Ditto. |
| * binutils-all/objcopy.exp: Ditto. |
| * binutils-all/objdump.exp: Ditto. |
| * binutils-all/size.exp: Ditto. |
| |
| Mon Apr 14 12:36:41 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/ar.exp (long_filenames): Check for a file system |
| with a 14 character file name length limit. |
| |
| Tue Apr 1 09:52:15 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * binutils-all/objdump.exp: Handle d10v. |
| |
| Fri Feb 7 16:45:34 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * binutils-all/ar.exp: Use prune_warnings instead of |
| prune_system_crud. |
| * binutils-all/objcopy.exp: Ditto. |
| |
| Wed Jan 29 00:16:43 1997 Bob Manson <manson@charmed.cygnus.com> |
| |
| * binutils-all/nm.exp: Use / between $srcdir and $subdir. |
| * binutils-all/objcopy.exp: Ditto. |
| * binutils-all/objdump.exp: Ditto. |
| * binutils-all/size.exp: Ditto. |
| * binutils-all/hppa/objdump.exp: Ditto. |
| |
| |
| Wed Oct 16 22:57:59 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * binutils-all/objdump.exp: Add mn10200 and mn10300 to expected |
| cpus list. |
| |
| Tue Oct 1 15:06:55 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * lib/utils-lib.exp (binutil_version): Fix for current version |
| printing. |
| |
| Sun Aug 4 22:25:40 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Fix end of line matching in srec tests |
| to work with TCL 7.5. |
| |
| Sat Jun 29 12:51:30 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Simple copy test works for i960 b.out |
| targets. |
| |
| Mon Jun 24 14:33:04 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: On OSF/1, the simple copy test will |
| succeed with gas, and fail with /bin/as, so mark it as an expected |
| failure only if it fails. |
| |
| Tue Mar 26 16:55:08 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * binutils-all/objcopy.exp: No longer expect adjust-section-vma |
| test to fail for hppa*-*-proelf*. |
| |
| Mon Mar 11 08:25:14 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * binutils-all/objdump.exp: Look for "$CODE$", not just "CODE". |
| |
| Wed Jan 31 11:55:13 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * binutils-all/objcopy.exp: Expect adjust-section-vma tests to |
| fail for hppa*-*-proelf* targets. |
| |
| Thu Jan 25 13:53:04 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objdump.exp: Update for objdump -h format change. |
| * binutils-all/objcopy.exp: Likewise. |
| |
| Mon Jan 15 18:14:14 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Use the lma, not the vma, when testing |
| address adjustments. |
| |
| Fri Dec 15 16:31:55 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objdump.exp: Update objdump -i test for current |
| objdump output. |
| |
| Mon Nov 27 15:15:09 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Correct fail calls to always use the |
| same string as the pass call. |
| |
| Wed Nov 22 13:18:58 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * lib/utils-lib.exp (prune_system_crud): Discard -g -O warnings |
| from native compilers on OSF/1 and SunOS. |
| |
| Fri Nov 17 10:36:09 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * lib/utils-lib.exp (default_binutils_compiler: Change error |
| message to say compilation rather than assembly. |
| |
| Wed Nov 15 18:34:42 1995 Ken Raeburn <raeburn@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Simple copy test does appear to work |
| on i*86-svr4. |
| |
| Wed Nov 15 12:19:28 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: If assembly fails, call unresolved. |
| Test running objcopy and strip on a final executable. |
| * binutils-all/testprog.c: New file. |
| * config/default.exp (STRIP, STRIPFLAGS): Define. |
| (binutils_compile): New procedure. |
| * lib/utils-lib.exp (default_binutils_compile): New procedure. |
| |
| Fri Nov 3 13:22:33 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * lib/utils-lib.exp (default_binutils_run): Don't use verbose |
| -log, reverting part of Oct 2 change. |
| |
| Wed Nov 1 15:09:57 1995 Manfred Hollstein KS/EF4A 60/1F/110 #40283 <manfred@lts.sel.alcatel.de> |
| |
| * binutils-all/objcopy.exp: Add setup_xfails for |
| m68*-motorola-sysv* and m88*-motorola-sysv*. |
| |
| Wed Oct 4 14:38:31 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/nm.exp: Add setup_xfails for XCOFF. |
| |
| Mon Oct 2 12:41:48 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/ar.exp: New file. |
| * binutils-all/bintest.s: Make text_symbol and data_symbol global. |
| Add new static symbols static_text_symbol and static_data_symbol. |
| * binutils-all/nm.exp: Adjust accordingly. |
| * config/default.exp (AR): Set if not set. |
| (binutils_remove): New procedure. |
| * lib/utils-lib.exp (default_binutils_run): Call |
| prune_system_crud on program output. Use verbose -log instead of |
| both verbose and send_log. |
| (default_binutils_remove): New procedure. |
| |
| * lib/utils-lib.exp (default_binutils_assemble): Call |
| prune_system_crud on assembler output. |
| |
| Tue Sep 26 14:07:05 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Add setup_xfails for simple copy test |
| for i386 COFF targets. |
| |
| Wed Sep 13 13:20:21 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * lib/utils-lib.exp (prune_system_crud): Define if not defined. |
| * binutils-all/objcopy.exp: Call prune_system_crud on cmp output. |
| |
| Sat Aug 19 17:38:06 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Add xfail for i*86-*-aout* for simple |
| copy test. |
| |
| Wed Aug 16 16:52:53 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/nm.exp: Add setup_xfail for mips*-sony-bsd* for |
| tests which fail on ECOFF targets. |
| |
| * binutils-all/objcopy.exp: Change i*86-*-linux xfail for simple |
| copy test to check for i*86-*-linuxaout* instead. |
| |
| Tue Aug 8 17:48:37 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Add setup_xfail for a29k-*-vxworks* |
| for simple copy test. |
| |
| Tue Jul 25 11:57:12 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Change setup_xfail for simple copy |
| test from i960-*-vxworks5.1 to i960-*-vxworks*. |
| |
| Mon Jul 10 12:25:46 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Add setup_xfail for z8*-*-coff for |
| simple copy test. |
| * binutils-all/objdump.exp (cpus_expected): Add z8001 and z8002. |
| |
| Sun May 21 20:32:53 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * binutils-all/hppa/objdump.exp (addendbug): Handle PA ELF targets |
| too. |
| * binutils-all/objcopy.exp (simple copy): Don't expect PA ELF |
| targets to fail. |
| |
| Tue Apr 4 14:52:08 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * binutils-all/hppa: Renamed from binutils-hppa. |
| |
| Wed Mar 29 12:02:43 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Add setup_xfail for simple copy test |
| for h8500-*-hms and h8500-*-coff. |
| |
| Tue Mar 28 11:18:28 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Add setup_xfail for simple copy test |
| for m68*-ericsson-ose and m88*-*-coff. |
| |
| Mon Mar 27 11:27:31 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objcopy.exp: Add setup_xfail for simple copy test |
| for m68*-*-vxworks*. |
| |
| Fri Mar 24 11:44:25 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-hppa/objdump.exp: Correct hppa*-*-* check. |
| |
| Tue Mar 21 10:48:45 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * binutils-hppa/addendbug.s: New testcase. |
| * binutils-hppa/objdump.exp: Run it. |
| |
| Mon Mar 20 11:31:05 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * lib/utils-lib.exp (default_binutils_run): Quote any dollar signs |
| in progargs before passing it to exec. |
| |
| Fri Mar 17 16:39:31 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * config/hppa.sed: Sed script to transform bintest.s into proper |
| PA assembly code. |
| * binutils-all/nm.exp: Enable these tests on the PA. |
| * binutils-all/objcopy.exp: Enable these tests on the PA. Expect |
| simple copy to fail. |
| * binutils-all/objdump.exp: Enable these tests on the PA. Handle |
| "CODE" as a section name. |
| * binutils-all/size.exp: Enable these tests on the PA. |
| * lib/utils-lib.exp (default_binutils_assemble): For "hppa*-*-*", |
| run the assembly through a sed script before passing it to the |
| assembler. |
| |
| Wed Mar 15 16:47:13 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/objdump.exp: Force section sizes to be interpreted |
| in hex. Change objdump -h failure mode to always use the same |
| string. |
| |
| Thu Jan 5 13:01:43 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * binutils-all/nm.exp: Just check for irix4*, rather than |
| irix\[0-4\]*, to avoid DejaGnu bug. |
| |
| Thu Dec 15 19:35:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * binutils-all/objcopy.exp: Expect simple-objcopy test to fail |
| for various other targets for which gas doesn't use bfd: sh-hms, |
| m68k-hpux, m68k-sunos, m68k-coff, i386-linux, a29k-udi, a29k-coff, |
| i960-vxworks5.1, i960-coff, h8300-hms, h8300-coff. |
| |
| Wed Dec 14 15:54:46 1994 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * binutils-all/size.exp: Skip tests requiring bintest.o on hppa, |
| since it (correctly) generates syntax errors on that platform. |
| * binutils-all/objdump.exp: Ditto. |
| * binutils-all/nm.exp: Ditto. |
| * binutils-all/objcopy.exp: Ditto. Also, move setup_xfail for |
| sh-coff to branch where objcopy execution produced no error |
| messages. Expect failure for hp300 also. |
| |
| Thu Dec 8 14:36:15 1994 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * binutils-all/objdump.exp (cpus_expected): New variable, taken |
| from objdump -i test, added ns32k and powerpc, sorted. |
| (objdump -i, -f tests): Use $cpus_expected. |
| |
| * binutils-all/objcopy.exp: For simple-copy test, expect failure |
| for sh-coff. |
| |
| Tue Oct 25 16:00:14 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * binutils-all/objcopy.exp: Adjust --adjust-section-vma tests for |
| new S-record section handling. |
| |
| Tue Oct 18 11:18:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * binutils-all/nm.exp: nm with no arguments and nm -P do not work |
| as expected on ECOFF targets; add calls to setup_xfail. |
| |
| * binutils-all/objcopy.exp: New file. |
| * config/default.exp: Initialize OBJCOPY and OBJCOPYFLAGS. |
| |
| Fri Oct 14 14:46:22 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| Rewrite testsuite. |
| * configure.in, Makefile.in: Remove. |
| * binutils-all/configure.in, binutils-all/Makefile.in: Remove. |
| * binutils-all/bintest.c: Remove. |
| * binutils-all/bintest.s: New file. |
| * binutils-all/nm.exp, binutils-all/objdump.exp: Rewrite. |
| * binutils-all/size.exp: Rewrite. |
| * config/default.exp: Load utils-lib.exp. Set AS and ASFLAGS. |
| Don't go up one directory from $base_dir. Create tmpdir. |
| (binutils_run, binutils-assemble): New procedures. |
| * config/unix.exp: Remove. |
| * config/mt-a29k-udi, config/mt-i386-aout: Remove. |
| * config/mt-i960-nindy, config/mt-lynx, config/mt-m68k: Remove. |
| * config/mt-mips-ecoff, config/mt-slite: Remove. |
| * config/mt-sparc-aout, config/mt-vxworks: Remove. |
| * lib/utils-lib.exp (binutil_version): Don't redirect standard |
| input when getting version. Don't unset errorInfo. |
| (default_binutils_run): New procedure. |
| (default_binutils_assemble): New procedure. |
| |
| Thu Sep 29 12:45:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * VMS does not permit `.' in directory names: renamed binutils.all |
| to binutils-all. |
| * configure.in (configdirs): Change binutils.all to binutils-all. |
| |
| Fri Sep 23 16:01:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * configure.in: Use mt-m68k for m68k*-*-aout* and m68k*-*-coff*, |
| not for m68k-*-*. |
| |
| Fri Sep 23 13:54:50 1994 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * binutils.all/objdump.exp: Added ARM to list of CPU types. |
| |
| Thu Sep 22 11:04:50 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * binutils.all/objdump.exp: Update for new usage message. |
| * binutils.all/size.exp: Use a double backslash in the string to |
| get a single backslash to the regexp matcher. Accept $TEXT$, |
| $DATA$ and $BSS$ as well as .text, .data and .bss, for HP/UX. |
| |
| Fri Sep 2 12:53:10 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * config/unix.exp: If nm.new does not exist, use [transform nm]. |
| * config/default.exp: Likewise. |
| |
| Wed Aug 24 12:41:37 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * configure.in, binutils.all/configure.in: Change i386 to |
| i[345]86. |
| |
| Tue Jul 19 15:23:53 1994 Bill Cox (bill@rtl.cygnus.com) |
| |
| * config/mt-mips-ecoff: Add -Tidp.ld option. |
| |
| Thu Jun 30 12:41:55 1994 J.T. Conklin (jtc@phishhead.cygnus.com) |
| |
| * config/default.exp: Use nm.new, not nm, from newly built tree. |
| |
| Tue May 17 14:04:05 1994 Bill Cox (bill@rtl.cygnus.com) |
| |
| * config/default.exp, config/unix.exp: Replace error |
| proc calls with perror. |
| |
| Tue May 10 11:20:54 1994 Stan Shebs (shebs@andros.cygnus.com) |
| |
| * configure.in (sparclite): Match on sparclite*-*-*. |
| |
| Wed Apr 13 18:25:19 1994 Ken Raeburn (raeburn@cujo.cygnus.com) |
| |
| * config/unix.exp: Use nm.new, not nm, from newly built tree. |
| |
| * binutils.all/objdump.exp: Add more wildcards to list of |
| single-letter options in pattern for usage message. |
| |
| * binutils.all/nm.exp: Deleted debug-symbols test, since it only |
| works for a.out/stabs systems. Fixed regexps to make underscores |
| optional, since some C compilers don't prepend them. Deleted |
| check for foo.o symbol, since again some systems don't generate |
| it. |
| |
| Mon Apr 11 10:31:00 1994 Bill Cox (bill@rtl.cygnus.com) |
| |
| * Makefile.in (check): Set TCL_LIBRARY for runtest. |
| |
| Mon Feb 14 19:34:03 1994 Rob Savoye (rob@darkstar.cygnus.com) |
| |
| * Makefile.in: Use new config features of DejaGnu in site.exp |
| file. "Make check" should now work for all crosses. |
| |
| Fri Jan 28 18:00:29 1994 Ken Raeburn (raeburn@cujo.cygnus.com) |
| |
| * binutils.all/objdump.exp: In usage message, accept |
| "section-name" as well as "section_name". |
| |
| Mon Jan 17 16:57:02 1994 Ken Raeburn (raeburn@cujo.cygnus.com) |
| |
| * binutils.all/objdump.exp: Trim list of format names expected, |
| and accept any known CPU type. |
| |
| Thu Dec 2 20:50:24 1993 Rob Savoye (rob@darkstar.cygnus.com) |
| |
| * Makefile.in: Remove some stuff from the site.exp file. |
| * config/unix.exp: Add global before seeing if the variables for |
| nm, objdump, and size exist. |
| |
| Wed Nov 3 11:12:32 1993 Rob Savoye (rob@darkstar.cygnus.com) |
| |
| * config/udi.exp,unix.exp: Transform tool name. |
| * binutils.all/*.exp: Clear errorInfo after exec. |
| |
| Fri Jul 2 12:41:20 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * binutils.all/*.exp: Use -- for long arguments rather than +. |
| |
| Fri Jun 4 10:52:29 1993 david d `zoo' zuhn (zoo@cirdan.cygnus.com) |
| |
| * configure.in: change srctrigger to Makefile.in |
| |
| Wed May 26 17:27:46 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS. |
| |
| Fri May 7 13:58:44 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * binutils.all/objdump.exp: Update for new usage message. |
| |
| Mon Apr 19 14:08:52 1993 Rob Savoye (rob@darkstar.cygnus.com) |
| |
| * binutils.all/*.exp: Use the new util_test proc. |
| * Makefile.in: Create a local site.exp file with config info. |
| |
| Thu Mar 25 05:38:47 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com) |
| |
| * nm.all/configure.in (srcname): Delete extra quote. |
| |
| Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com) |
| |
| * binutils/testsuite: made modifications to testcases, etc., to allow |
| them to work properly given the reorganization of deja-gnu and the |
| relocation of the testcases from deja-gnu to a "tool" subdirectory. |
| |
| Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com) |
| |
| * binutils/testsuite: Initial creation of binutils/testsuite. |
| Migrated dejagnu testcases and support files for testing nm to |
| binutils/testsuite from deja-gnu. These files were moved "as is" |
| with no modifications. This migration is part of a major overhaul |
| of dejagnu. The modifications to these testcases, etc., which |
| will allow them to work with the new version of dejagnu will be |
| made in a future update. |
| |
