| /* BFD support for handling relocation entries. |
| Copyright (C) 1990-2023 Free Software Foundation, Inc. |
| Written by Cygnus Support. |
| |
| This file is part of BFD, the Binary File Descriptor library. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, |
| MA 02110-1301, USA. */ |
| |
| /* |
| SECTION |
| Relocations |
| |
| BFD maintains relocations in much the same way it maintains |
| symbols: they are left alone until required, then read in |
| en-masse and translated into an internal form. A common |
| routine <<bfd_perform_relocation>> acts upon the |
| canonical form to do the fixup. |
| |
| Relocations are maintained on a per section basis, |
| while symbols are maintained on a per BFD basis. |
| |
| All that a back end has to do to fit the BFD interface is to create |
| a <<struct reloc_cache_entry>> for each relocation |
| in a particular section, and fill in the right bits of the structures. |
| |
| @menu |
| @* typedef arelent:: |
| @* howto manager:: |
| @end menu |
| |
| */ |
| |
| /* DO compile in the reloc_code name table from libbfd.h. */ |
| #define _BFD_MAKE_TABLE_bfd_reloc_code_real |
| |
| #include "sysdep.h" |
| #include "bfd.h" |
| #include "bfdlink.h" |
| #include "libbfd.h" |
| #include "bfdver.h" |
| |
| /* |
| DOCDD |
| INODE |
| typedef arelent, howto manager, Relocations, Relocations |
| |
| SUBSECTION |
| typedef arelent |
| |
| This is the structure of a relocation entry: |
| |
| EXTERNAL |
| .typedef enum bfd_reloc_status |
| .{ |
| . {* No errors detected. Note - the value 2 is used so that it |
| . will not be mistaken for the boolean TRUE or FALSE values. *} |
| . bfd_reloc_ok = 2, |
| . |
| . {* The relocation was performed, but there was an overflow. *} |
| . bfd_reloc_overflow, |
| . |
| . {* The address to relocate was not within the section supplied. *} |
| . bfd_reloc_outofrange, |
| . |
| . {* Used by special functions. *} |
| . bfd_reloc_continue, |
| . |
| . {* Unsupported relocation size requested. *} |
| . bfd_reloc_notsupported, |
| . |
| . {* Target specific meaning. *} |
| . bfd_reloc_other, |
| . |
| . {* The symbol to relocate against was undefined. *} |
| . bfd_reloc_undefined, |
| . |
| . {* The relocation was performed, but may not be ok. If this type is |
| . returned, the error_message argument to bfd_perform_relocation |
| . will be set. *} |
| . bfd_reloc_dangerous |
| . } |
| . bfd_reloc_status_type; |
| . |
| .typedef const struct reloc_howto_struct reloc_howto_type; |
| . |
| |
| CODE_FRAGMENT |
| .struct reloc_cache_entry |
| .{ |
| . {* A pointer into the canonical table of pointers. *} |
| . struct bfd_symbol **sym_ptr_ptr; |
| . |
| . {* offset in section. *} |
| . bfd_size_type address; |
| . |
| . {* addend for relocation value. *} |
| . bfd_vma addend; |
| . |
| . {* Pointer to how to perform the required relocation. *} |
| . reloc_howto_type *howto; |
| . |
| .}; |
| . |
| */ |
| |
| /* |
| DESCRIPTION |
| |
| Here is a description of each of the fields within an <<arelent>>: |
| |
| o <<sym_ptr_ptr>> |
| |
| The symbol table pointer points to a pointer to the symbol |
| associated with the relocation request. It is the pointer |
| into the table returned by the back end's |
| <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is |
| referenced through a pointer to a pointer so that tools like |
| the linker can fix up all the symbols of the same name by |
| modifying only one pointer. The relocation routine looks in |
| the symbol and uses the base of the section the symbol is |
| attached to and the value of the symbol as the initial |
| relocation offset. If the symbol pointer is zero, then the |
| section provided is looked up. |
| |
| o <<address>> |
| |
| The <<address>> field gives the offset in bytes from the base of |
| the section data which owns the relocation record to the first |
| byte of relocatable information. The actual data relocated |
| will be relative to this point; for example, a relocation |
| type which modifies the bottom two bytes of a four byte word |
| would not touch the first byte pointed to in a big endian |
| world. |
| |
| o <<addend>> |
| |
| The <<addend>> is a value provided by the back end to be added (!) |
| to the relocation offset. Its interpretation is dependent upon |
| the howto. For example, on the 68k the code: |
| |
| | char foo[]; |
| | main() |
| | { |
| | return foo[0x12345678]; |
| | } |
| |
| Could be compiled into: |
| |
| | linkw fp,#-4 |
| | moveb @@#12345678,d0 |
| | extbl d0 |
| | unlk fp |
| | rts |
| |
| This could create a reloc pointing to <<foo>>, but leave the |
| offset in the data, something like: |
| |
| |RELOCATION RECORDS FOR [.text]: |
| |offset type value |
| |00000006 32 _foo |
| | |
| |00000000 4e56 fffc ; linkw fp,#-4 |
| |00000004 1039 1234 5678 ; moveb @@#12345678,d0 |
| |0000000a 49c0 ; extbl d0 |
| |0000000c 4e5e ; unlk fp |
| |0000000e 4e75 ; rts |
| |
| Using coff and an 88k, some instructions don't have enough |
| space in them to represent the full address range, and |
| pointers have to be loaded in two parts. So you'd get something like: |
| |
| | or.u r13,r0,hi16(_foo+0x12345678) |
| | ld.b r2,r13,lo16(_foo+0x12345678) |
| | jmp r1 |
| |
| This should create two relocs, both pointing to <<_foo>>, and with |
| 0x12340000 in their addend field. The data would consist of: |
| |
| |RELOCATION RECORDS FOR [.text]: |
| |offset type value |
| |00000002 HVRT16 _foo+0x12340000 |
| |00000006 LVRT16 _foo+0x12340000 |
| | |
| |00000000 5da05678 ; or.u r13,r0,0x5678 |
| |00000004 1c4d5678 ; ld.b r2,r13,0x5678 |
| |00000008 f400c001 ; jmp r1 |
| |
| The relocation routine digs out the value from the data, adds |
| it to the addend to get the original offset, and then adds the |
| value of <<_foo>>. Note that all 32 bits have to be kept around |
| somewhere, to cope with carry from bit 15 to bit 16. |
| |
| One further example is the sparc and the a.out format. The |
| sparc has a similar problem to the 88k, in that some |
| instructions don't have room for an entire offset, but on the |
| sparc the parts are created in odd sized lumps. The designers of |
| the a.out format chose to not use the data within the section |
| for storing part of the offset; all the offset is kept within |
| the reloc. Anything in the data should be ignored. |
| |
| | save %sp,-112,%sp |
| | sethi %hi(_foo+0x12345678),%g2 |
| | ldsb [%g2+%lo(_foo+0x12345678)],%i0 |
| | ret |
| | restore |
| |
| Both relocs contain a pointer to <<foo>>, and the offsets |
| contain junk. |
| |
| |RELOCATION RECORDS FOR [.text]: |
| |offset type value |
| |00000004 HI22 _foo+0x12345678 |
| |00000008 LO10 _foo+0x12345678 |
| | |
| |00000000 9de3bf90 ; save %sp,-112,%sp |
| |00000004 05000000 ; sethi %hi(_foo+0),%g2 |
| |00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0 |
| |0000000c 81c7e008 ; ret |
| |00000010 81e80000 ; restore |
| |
| o <<howto>> |
| |
| The <<howto>> field can be imagined as a |
| relocation instruction. It is a pointer to a structure which |
| contains information on what to do with all of the other |
| information in the reloc record and data section. A back end |
| would normally have a relocation instruction set and turn |
| relocations into pointers to the correct structure on input - |
| but it would be possible to create each howto field on demand. |
| |
| */ |
| |
| /* |
| SUBSUBSECTION |
| <<enum complain_overflow>> |
| |
| Indicates what sort of overflow checking should be done when |
| performing a relocation. |
| |
| CODE_FRAGMENT |
| .enum complain_overflow |
| .{ |
| . {* Do not complain on overflow. *} |
| . complain_overflow_dont, |
| . |
| . {* Complain if the value overflows when considered as a signed |
| . number one bit larger than the field. ie. A bitfield of N bits |
| . is allowed to represent -2**n to 2**n-1. *} |
| . complain_overflow_bitfield, |
| . |
| . {* Complain if the value overflows when considered as a signed |
| . number. *} |
| . complain_overflow_signed, |
| . |
| . {* Complain if the value overflows when considered as an |
| . unsigned number. *} |
| . complain_overflow_unsigned |
| .}; |
| . |
| */ |
| |
| /* |
| SUBSUBSECTION |
| <<reloc_howto_type>> |
| |
| The <<reloc_howto_type>> is a structure which contains all the |
| information that libbfd needs to know to tie up a back end's data. |
| |
| CODE_FRAGMENT |
| .struct reloc_howto_struct |
| .{ |
| . {* The type field has mainly a documentary use - the back end can |
| . do what it wants with it, though normally the back end's idea of |
| . an external reloc number is stored in this field. *} |
| . unsigned int type; |
| . |
| . {* The size of the item to be relocated in bytes. *} |
| . unsigned int size:4; |
| . |
| . {* The number of bits in the field to be relocated. This is used |
| . when doing overflow checking. *} |
| . unsigned int bitsize:7; |
| . |
| . {* The value the final relocation is shifted right by. This drops |
| . unwanted data from the relocation. *} |
| . unsigned int rightshift:6; |
| . |
| . {* The bit position of the reloc value in the destination. |
| . The relocated value is left shifted by this amount. *} |
| . unsigned int bitpos:6; |
| . |
| . {* What type of overflow error should be checked for when |
| . relocating. *} |
| . ENUM_BITFIELD (complain_overflow) complain_on_overflow:2; |
| . |
| . {* The relocation value should be negated before applying. *} |
| . unsigned int negate:1; |
| . |
| . {* The relocation is relative to the item being relocated. *} |
| . unsigned int pc_relative:1; |
| . |
| . {* Some formats record a relocation addend in the section contents |
| . rather than with the relocation. For ELF formats this is the |
| . distinction between USE_REL and USE_RELA (though the code checks |
| . for USE_REL == 1/0). The value of this field is TRUE if the |
| . addend is recorded with the section contents; when performing a |
| . partial link (ld -r) the section contents (the data) will be |
| . modified. The value of this field is FALSE if addends are |
| . recorded with the relocation (in arelent.addend); when performing |
| . a partial link the relocation will be modified. |
| . All relocations for all ELF USE_RELA targets should set this field |
| . to FALSE (values of TRUE should be looked on with suspicion). |
| . However, the converse is not true: not all relocations of all ELF |
| . USE_REL targets set this field to TRUE. Why this is so is peculiar |
| . to each particular target. For relocs that aren't used in partial |
| . links (e.g. GOT stuff) it doesn't matter what this is set to. *} |
| . unsigned int partial_inplace:1; |
| . |
| . {* When some formats create PC relative instructions, they leave |
| . the value of the pc of the place being relocated in the offset |
| . slot of the instruction, so that a PC relative relocation can |
| . be made just by adding in an ordinary offset (e.g., sun3 a.out). |
| . Some formats leave the displacement part of an instruction |
| . empty (e.g., ELF); this flag signals the fact. *} |
| . unsigned int pcrel_offset:1; |
| . |
| . {* Whether bfd_install_relocation should just install the addend, |
| . or should follow the practice of some older object formats and |
| . install a value including the symbol. *} |
| . unsigned int install_addend:1; |
| . |
| . {* src_mask selects the part of the instruction (or data) to be used |
| . in the relocation sum. If the target relocations don't have an |
| . addend in the reloc, eg. ELF USE_REL, src_mask will normally equal |
| . dst_mask to extract the addend from the section contents. If |
| . relocations do have an addend in the reloc, eg. ELF USE_RELA, this |
| . field should normally be zero. Non-zero values for ELF USE_RELA |
| . targets should be viewed with suspicion as normally the value in |
| . the dst_mask part of the section contents should be ignored. *} |
| . bfd_vma src_mask; |
| . |
| . {* dst_mask selects which parts of the instruction (or data) are |
| . replaced with a relocated value. *} |
| . bfd_vma dst_mask; |
| . |
| . {* If this field is non null, then the supplied function is |
| . called rather than the normal function. This allows really |
| . strange relocation methods to be accommodated. *} |
| . bfd_reloc_status_type (*special_function) |
| . (bfd *, arelent *, struct bfd_symbol *, void *, asection *, |
| . bfd *, char **); |
| . |
| . {* The textual name of the relocation type. *} |
| . const char *name; |
| .}; |
| . |
| */ |
| |
| /* |
| FUNCTION |
| The HOWTO Macro |
| |
| DESCRIPTION |
| The HOWTO macro fills in a reloc_howto_type (a typedef for |
| const struct reloc_howto_struct). |
| |
| .#define HOWTO_INSTALL_ADDEND 0 |
| .#define HOWTO_RSIZE(sz) ((sz) < 0 ? -(sz) : (sz)) |
| .#define HOWTO(type, right, size, bits, pcrel, left, ovf, func, name, \ |
| . inplace, src_mask, dst_mask, pcrel_off) \ |
| . { (unsigned) type, HOWTO_RSIZE (size), bits, right, left, ovf, \ |
| . size < 0, pcrel, inplace, pcrel_off, HOWTO_INSTALL_ADDEND, \ |
| . src_mask, dst_mask, func, name } |
| |
| DESCRIPTION |
| This is used to fill in an empty howto entry in an array. |
| |
| .#define EMPTY_HOWTO(C) \ |
| . HOWTO ((C), 0, 1, 0, false, 0, complain_overflow_dont, NULL, \ |
| . NULL, false, 0, 0, false) |
| . |
| .static inline unsigned int |
| .bfd_get_reloc_size (reloc_howto_type *howto) |
| .{ |
| . return howto->size; |
| .} |
| . |
| */ |
| |
| /* |
| DEFINITION |
| arelent_chain |
| |
| DESCRIPTION |
| How relocs are tied together in an <<asection>>: |
| |
| .typedef struct relent_chain |
| .{ |
| . arelent relent; |
| . struct relent_chain *next; |
| .} |
| .arelent_chain; |
| . |
| */ |
| |
| /* N_ONES produces N one bits, without undefined behaviour for N |
| between zero and the number of bits in a bfd_vma. */ |
| #define N_ONES(n) ((n) == 0 ? 0 : ((bfd_vma) 1 << ((n) - 1) << 1) - 1) |
| |
| /* |
| FUNCTION |
| bfd_check_overflow |
| |
| SYNOPSIS |
| bfd_reloc_status_type bfd_check_overflow |
| (enum complain_overflow how, |
| unsigned int bitsize, |
| unsigned int rightshift, |
| unsigned int addrsize, |
| bfd_vma relocation); |
| |
| DESCRIPTION |
| Perform overflow checking on @var{relocation} which has |
| @var{bitsize} significant bits and will be shifted right by |
| @var{rightshift} bits, on a machine with addresses containing |
| @var{addrsize} significant bits. The result is either of |
| @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}. |
| |
| */ |
| |
| bfd_reloc_status_type |
| bfd_check_overflow (enum complain_overflow how, |
| unsigned int bitsize, |
| unsigned int rightshift, |
| unsigned int addrsize, |
| bfd_vma relocation) |
| { |
| bfd_vma fieldmask, addrmask, signmask, ss, a; |
| bfd_reloc_status_type flag = bfd_reloc_ok; |
| |
| if (bitsize == 0) |
| return flag; |
| |
| /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not, |
| we'll be permissive: extra bits in the field mask will |
| automatically extend the address mask for purposes of the |
| overflow check. */ |
| fieldmask = N_ONES (bitsize); |
| signmask = ~fieldmask; |
| addrmask = N_ONES (addrsize) | (fieldmask << rightshift); |
| a = (relocation & addrmask) >> rightshift; |
| |
| switch (how) |
| { |
| case complain_overflow_dont: |
| break; |
| |
| case complain_overflow_signed: |
| /* If any sign bits are set, all sign bits must be set. That |
| is, A must be a valid negative address after shifting. */ |
| signmask = ~ (fieldmask >> 1); |
| /* Fall thru */ |
| |
| case complain_overflow_bitfield: |
| /* Bitfields are sometimes signed, sometimes unsigned. We |
| explicitly allow an address wrap too, which means a bitfield |
| of n bits is allowed to store -2**n to 2**n-1. Thus overflow |
| if the value has some, but not all, bits set outside the |
| field. */ |
| ss = a & signmask; |
| if (ss != 0 && ss != ((addrmask >> rightshift) & signmask)) |
| flag = bfd_reloc_overflow; |
| break; |
| |
| case complain_overflow_unsigned: |
| /* We have an overflow if the address does not fit in the field. */ |
| if ((a & signmask) != 0) |
| flag = bfd_reloc_overflow; |
| break; |
| |
| default: |
| abort (); |
| } |
| |
| return flag; |
| } |
| |
| /* |
| FUNCTION |
| bfd_reloc_offset_in_range |
| |
| SYNOPSIS |
| bool bfd_reloc_offset_in_range |
| (reloc_howto_type *howto, |
| bfd *abfd, |
| asection *section, |
| bfd_size_type offset); |
| |
| DESCRIPTION |
| Returns TRUE if the reloc described by @var{HOWTO} can be |
| applied at @var{OFFSET} octets in @var{SECTION}. |
| |
| */ |
| |
| /* HOWTO describes a relocation, at offset OCTET. Return whether the |
| relocation field is within SECTION of ABFD. */ |
| |
| bool |
| bfd_reloc_offset_in_range (reloc_howto_type *howto, |
| bfd *abfd, |
| asection *section, |
| bfd_size_type octet) |
| { |
| bfd_size_type octet_end = bfd_get_section_limit_octets (abfd, section); |
| bfd_size_type reloc_size = bfd_get_reloc_size (howto); |
| |
| /* The reloc field must be contained entirely within the section. |
| Allow zero length fields (marker relocs or NONE relocs where no |
| relocation will be performed) at the end of the section. */ |
| return octet <= octet_end && reloc_size <= octet_end - octet; |
| } |
| |
| /* Read and return the section contents at DATA converted to a host |
| integer (bfd_vma). The number of bytes read is given by the HOWTO. */ |
| |
| static bfd_vma |
| read_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto) |
| { |
| switch (bfd_get_reloc_size (howto)) |
| { |
| case 0: |
| break; |
| |
| case 1: |
| return bfd_get_8 (abfd, data); |
| |
| case 2: |
| return bfd_get_16 (abfd, data); |
| |
| case 3: |
| return bfd_get_24 (abfd, data); |
| |
| case 4: |
| return bfd_get_32 (abfd, data); |
| |
| #ifdef BFD64 |
| case 8: |
| return bfd_get_64 (abfd, data); |
| #endif |
| |
| default: |
| abort (); |
| } |
| return 0; |
| } |
| |
| /* Convert VAL to target format and write to DATA. The number of |
| bytes written is given by the HOWTO. */ |
| |
| static void |
| write_reloc (bfd *abfd, bfd_vma val, bfd_byte *data, reloc_howto_type *howto) |
| { |
| switch (bfd_get_reloc_size (howto)) |
| { |
| case 0: |
| break; |
| |
| case 1: |
| bfd_put_8 (abfd, val, data); |
| break; |
| |
| case 2: |
| bfd_put_16 (abfd, val, data); |
| break; |
| |
| case 3: |
| bfd_put_24 (abfd, val, data); |
| break; |
| |
| case 4: |
| bfd_put_32 (abfd, val, data); |
| break; |
| |
| #ifdef BFD64 |
| case 8: |
| bfd_put_64 (abfd, val, data); |
| break; |
| #endif |
| |
| default: |
| abort (); |
| } |
| } |
| |
| /* Apply RELOCATION value to target bytes at DATA, according to |
| HOWTO. */ |
| |
| static void |
| apply_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto, |
| bfd_vma relocation) |
| { |
| bfd_vma val = read_reloc (abfd, data, howto); |
| |
| if (howto->negate) |
| relocation = -relocation; |
| |
| val = ((val & ~howto->dst_mask) |
| | (((val & howto->src_mask) + relocation) & howto->dst_mask)); |
| |
| write_reloc (abfd, val, data, howto); |
| } |
| |
| /* |
| FUNCTION |
| bfd_perform_relocation |
| |
| SYNOPSIS |
| bfd_reloc_status_type bfd_perform_relocation |
| (bfd *abfd, |
| arelent *reloc_entry, |
| void *data, |
| asection *input_section, |
| bfd *output_bfd, |
| char **error_message); |
| |
| DESCRIPTION |
| If @var{output_bfd} is supplied to this function, the |
| generated image will be relocatable; the relocations are |
| copied to the output file after they have been changed to |
| reflect the new state of the world. There are two ways of |
| reflecting the results of partial linkage in an output file: |
| by modifying the output data in place, and by modifying the |
| relocation record. Some native formats (e.g., basic a.out and |
| basic coff) have no way of specifying an addend in the |
| relocation type, so the addend has to go in the output data. |
| This is no big deal since in these formats the output data |
| slot will always be big enough for the addend. Complex reloc |
| types with addends were invented to solve just this problem. |
| The @var{error_message} argument is set to an error message if |
| this return @code{bfd_reloc_dangerous}. |
| |
| */ |
| |
| bfd_reloc_status_type |
| bfd_perform_relocation (bfd *abfd, |
| arelent *reloc_entry, |
| void *data, |
| asection *input_section, |
| bfd *output_bfd, |
| char **error_message) |
| { |
| bfd_vma relocation; |
| bfd_reloc_status_type flag = bfd_reloc_ok; |
| bfd_size_type octets; |
| bfd_vma output_base = 0; |
| reloc_howto_type *howto = reloc_entry->howto; |
| asection *reloc_target_output_section; |
| asymbol *symbol; |
| |
| symbol = *(reloc_entry->sym_ptr_ptr); |
| |
| /* If we are not producing relocatable output, return an error if |
| the symbol is not defined. An undefined weak symbol is |
| considered to have a value of zero (SVR4 ABI, p. 4-27). */ |
| if (bfd_is_und_section (symbol->section) |
| && (symbol->flags & BSF_WEAK) == 0 |
| && output_bfd == NULL) |
| flag = bfd_reloc_undefined; |
| |
| /* If there is a function supplied to handle this relocation type, |
| call it. It'll return `bfd_reloc_continue' if further processing |
| can be done. */ |
| if (howto && howto->special_function) |
| { |
| bfd_reloc_status_type cont; |
| |
| /* Note - we do not call bfd_reloc_offset_in_range here as the |
| reloc_entry->address field might actually be valid for the |
| backend concerned. It is up to the special_function itself |
| to call bfd_reloc_offset_in_range if needed. */ |
| cont = howto->special_function (abfd, reloc_entry, symbol, data, |
| input_section, output_bfd, |
| error_message); |
| if (cont != bfd_reloc_continue) |
| return cont; |
| } |
| |
| if (bfd_is_abs_section (symbol->section) |
| && output_bfd != NULL) |
| { |
| reloc_entry->address += input_section->output_offset; |
| return bfd_reloc_ok; |
| } |
| |
| /* PR 17512: file: 0f67f69d. */ |
| if (howto == NULL) |
| return bfd_reloc_undefined; |
| |
| /* Is the address of the relocation really within the section? */ |
| octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section); |
| if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets)) |
| return bfd_reloc_outofrange; |
| |
| /* Work out which section the relocation is targeted at and the |
| initial relocation command value. */ |
| |
| /* Get symbol value. (Common symbols are special.) */ |
| if (bfd_is_com_section (symbol->section)) |
| relocation = 0; |
| else |
| relocation = symbol->value; |
| |
| reloc_target_output_section = symbol->section->output_section; |
| |
| /* Convert input-section-relative symbol value to absolute. */ |
| if ((output_bfd && ! howto->partial_inplace) |
| || reloc_target_output_section == NULL) |
| output_base = 0; |
| else |
| output_base = reloc_target_output_section->vma; |
| |
| output_base += symbol->section->output_offset; |
| |
| /* If symbol addresses are in octets, convert to bytes. */ |
| if (bfd_get_flavour (abfd) == bfd_target_elf_flavour |
| && (symbol->section->flags & SEC_ELF_OCTETS)) |
| output_base *= bfd_octets_per_byte (abfd, input_section); |
| |
| relocation += output_base; |
| |
| /* Add in supplied addend. */ |
| relocation += reloc_entry->addend; |
| |
| /* Here the variable relocation holds the final address of the |
| symbol we are relocating against, plus any addend. */ |
| |
| if (howto->pc_relative) |
| { |
| /* This is a PC relative relocation. We want to set RELOCATION |
| to the distance between the address of the symbol and the |
| location. RELOCATION is already the address of the symbol. |
| |
| We start by subtracting the address of the section containing |
| the location. |
| |
| If pcrel_offset is set, we must further subtract the position |
| of the location within the section. Some targets arrange for |
| the addend to be the negative of the position of the location |
| within the section; for example, i386-aout does this. For |
| i386-aout, pcrel_offset is FALSE. Some other targets do not |
| include the position of the location; for example, ELF. |
| For those targets, pcrel_offset is TRUE. |
| |
| If we are producing relocatable output, then we must ensure |
| that this reloc will be correctly computed when the final |
| relocation is done. If pcrel_offset is FALSE we want to wind |
| up with the negative of the location within the section, |
| which means we must adjust the existing addend by the change |
| in the location within the section. If pcrel_offset is TRUE |
| we do not want to adjust the existing addend at all. |
| |
| FIXME: This seems logical to me, but for the case of |
| producing relocatable output it is not what the code |
| actually does. I don't want to change it, because it seems |
| far too likely that something will break. */ |
| |
| relocation -= |
| input_section->output_section->vma + input_section->output_offset; |
| |
| if (howto->pcrel_offset) |
| relocation -= reloc_entry->address; |
| } |
| |
| if (output_bfd != NULL) |
| { |
| if (! howto->partial_inplace) |
| { |
| /* This is a partial relocation, and we want to apply the relocation |
| to the reloc entry rather than the raw data. Modify the reloc |
| inplace to reflect what we now know. */ |
| reloc_entry->addend = relocation; |
| reloc_entry->address += input_section->output_offset; |
| return flag; |
| } |
| else |
| { |
| /* This is a partial relocation, but inplace, so modify the |
| reloc record a bit. |
| |
| If we've relocated with a symbol with a section, change |
| into a ref to the section belonging to the symbol. */ |
| |
| reloc_entry->address += input_section->output_offset; |
| |
| /* WTF?? */ |
| if (abfd->xvec->flavour == bfd_target_coff_flavour) |
| { |
| /* For m68k-coff, the addend was being subtracted twice during |
| relocation with -r. Removing the line below this comment |
| fixes that problem; see PR 2953. |
| |
| However, Ian wrote the following, regarding removing the line below, |
| which explains why it is still enabled: --djm |
| |
| If you put a patch like that into BFD you need to check all the COFF |
| linkers. I am fairly certain that patch will break coff-i386 (e.g., |
| SCO); see coff_i386_reloc in coff-i386.c where I worked around the |
| problem in a different way. There may very well be a reason that the |
| code works as it does. |
| |
| Hmmm. The first obvious point is that bfd_perform_relocation should |
| not have any tests that depend upon the flavour. It's seem like |
| entirely the wrong place for such a thing. The second obvious point |
| is that the current code ignores the reloc addend when producing |
| relocatable output for COFF. That's peculiar. In fact, I really |
| have no idea what the point of the line you want to remove is. |
| |
| A typical COFF reloc subtracts the old value of the symbol and adds in |
| the new value to the location in the object file (if it's a pc |
| relative reloc it adds the difference between the symbol value and the |
| location). When relocating we need to preserve that property. |
| |
| BFD handles this by setting the addend to the negative of the old |
| value of the symbol. Unfortunately it handles common symbols in a |
| non-standard way (it doesn't subtract the old value) but that's a |
| different story (we can't change it without losing backward |
| compatibility with old object files) (coff-i386 does subtract the old |
| value, to be compatible with existing coff-i386 targets, like SCO). |
| |
| So everything works fine when not producing relocatable output. When |
| we are producing relocatable output, logically we should do exactly |
| what we do when not producing relocatable output. Therefore, your |
| patch is correct. In fact, it should probably always just set |
| reloc_entry->addend to 0 for all cases, since it is, in fact, going to |
| add the value into the object file. This won't hurt the COFF code, |
| which doesn't use the addend; I'm not sure what it will do to other |
| formats (the thing to check for would be whether any formats both use |
| the addend and set partial_inplace). |
| |
| When I wanted to make coff-i386 produce relocatable output, I ran |
| into the problem that you are running into: I wanted to remove that |
| line. Rather than risk it, I made the coff-i386 relocs use a special |
| function; it's coff_i386_reloc in coff-i386.c. The function |
| specifically adds the addend field into the object file, knowing that |
| bfd_perform_relocation is not going to. If you remove that line, then |
| coff-i386.c will wind up adding the addend field in twice. It's |
| trivial to fix; it just needs to be done. |
| |
| The problem with removing the line is just that it may break some |
| working code. With BFD it's hard to be sure of anything. The right |
| way to deal with this is simply to build and test at least all the |
| supported COFF targets. It should be straightforward if time and disk |
| space consuming. For each target: |
| 1) build the linker |
| 2) generate some executable, and link it using -r (I would |
| probably use paranoia.o and link against newlib/libc.a, which |
| for all the supported targets would be available in |
| /usr/cygnus/progressive/H-host/target/lib/libc.a). |
| 3) make the change to reloc.c |
| 4) rebuild the linker |
| 5) repeat step 2 |
| 6) if the resulting object files are the same, you have at least |
| made it no worse |
| 7) if they are different you have to figure out which version is |
| right |
| */ |
| relocation -= reloc_entry->addend; |
| reloc_entry->addend = 0; |
| } |
| else |
| { |
| reloc_entry->addend = relocation; |
| } |
| } |
| } |
| |
| /* FIXME: This overflow checking is incomplete, because the value |
| might have overflowed before we get here. For a correct check we |
| need to compute the value in a size larger than bitsize, but we |
| can't reasonably do that for a reloc the same size as a host |
| machine word. |
| FIXME: We should also do overflow checking on the result after |
| adding in the value contained in the object file. */ |
| if (howto->complain_on_overflow != complain_overflow_dont |
| && flag == bfd_reloc_ok) |
| flag = bfd_check_overflow (howto->complain_on_overflow, |
| howto->bitsize, |
| howto->rightshift, |
| bfd_arch_bits_per_address (abfd), |
| relocation); |
| |
| /* Either we are relocating all the way, or we don't want to apply |
| the relocation to the reloc entry (probably because there isn't |
| any room in the output format to describe addends to relocs). */ |
| |
| /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler |
| (OSF version 1.3, compiler version 3.11). It miscompiles the |
| following program: |
| |
| struct str |
| { |
| unsigned int i0; |
| } s = { 0 }; |
| |
| int |
| main () |
| { |
| unsigned long x; |
| |
| x = 0x100000000; |
| x <<= (unsigned long) s.i0; |
| if (x == 0) |
| printf ("failed\n"); |
| else |
| printf ("succeeded (%lx)\n", x); |
| } |
| */ |
| |
| relocation >>= (bfd_vma) howto->rightshift; |
| |
| /* Shift everything up to where it's going to be used. */ |
| relocation <<= (bfd_vma) howto->bitpos; |
| |
| /* Wait for the day when all have the mask in them. */ |
| |
| /* What we do: |
| i instruction to be left alone |
| o offset within instruction |
| r relocation offset to apply |
| S src mask |
| D dst mask |
| N ~dst mask |
| A part 1 |
| B part 2 |
| R result |
| |
| Do this: |
| (( i i i i i o o o o o from bfd_get<size> |
| and S S S S S) to get the size offset we want |
| + r r r r r r r r r r) to get the final value to place |
| and D D D D D to chop to right size |
| ----------------------- |
| = A A A A A |
| And this: |
| ( i i i i i o o o o o from bfd_get<size> |
| and N N N N N ) get instruction |
| ----------------------- |
| = B B B B B |
| |
| And then: |
| ( B B B B B |
| or A A A A A) |
| ----------------------- |
| = R R R R R R R R R R put into bfd_put<size> |
| */ |
| |
| data = (bfd_byte *) data + octets; |
| apply_reloc (abfd, data, howto, relocation); |
| return flag; |
| } |
| |
| /* |
| FUNCTION |
| bfd_install_relocation |
| |
| SYNOPSIS |
| bfd_reloc_status_type bfd_install_relocation |
| (bfd *abfd, |
| arelent *reloc_entry, |
| void *data, bfd_vma data_start, |
| asection *input_section, |
| char **error_message); |
| |
| DESCRIPTION |
| This looks remarkably like <<bfd_perform_relocation>>, except it |
| does not expect that the section contents have been filled in. |
| I.e., it's suitable for use when creating, rather than applying |
| a relocation. |
| |
| For now, this function should be considered reserved for the |
| assembler. |
| */ |
| |
| bfd_reloc_status_type |
| bfd_install_relocation (bfd *abfd, |
| arelent *reloc_entry, |
| void *data_start, |
| bfd_vma data_start_offset, |
| asection *input_section, |
| char **error_message) |
| { |
| bfd_vma relocation; |
| bfd_reloc_status_type flag = bfd_reloc_ok; |
| bfd_size_type octets; |
| bfd_vma output_base = 0; |
| reloc_howto_type *howto = reloc_entry->howto; |
| asection *reloc_target_output_section; |
| asymbol *symbol; |
| bfd_byte *data; |
| |
| symbol = *(reloc_entry->sym_ptr_ptr); |
| |
| /* If there is a function supplied to handle this relocation type, |
| call it. It'll return `bfd_reloc_continue' if further processing |
| can be done. */ |
| if (howto && howto->special_function) |
| { |
| bfd_reloc_status_type cont; |
| |
| /* Note - we do not call bfd_reloc_offset_in_range here as the |
| reloc_entry->address field might actually be valid for the |
| backend concerned. It is up to the special_function itself |
| to call bfd_reloc_offset_in_range if needed. */ |
| cont = howto->special_function (abfd, reloc_entry, symbol, |
| /* XXX - Non-portable! */ |
| ((bfd_byte *) data_start |
| - data_start_offset), |
| input_section, abfd, error_message); |
| if (cont != bfd_reloc_continue) |
| return cont; |
| } |
| |
| if (howto->install_addend) |
| relocation = reloc_entry->addend; |
| else |
| { |
| if (bfd_is_abs_section (symbol->section)) |
| return bfd_reloc_ok; |
| |
| /* Work out which section the relocation is targeted at and the |
| initial relocation command value. */ |
| |
| /* Get symbol value. (Common symbols are special.) */ |
| if (bfd_is_com_section (symbol->section)) |
| relocation = 0; |
| else |
| relocation = symbol->value; |
| |
| reloc_target_output_section = symbol->section; |
| |
| /* Convert input-section-relative symbol value to absolute. */ |
| if (! howto->partial_inplace) |
| output_base = 0; |
| else |
| output_base = reloc_target_output_section->vma; |
| |
| /* If symbol addresses are in octets, convert to bytes. */ |
| if (bfd_get_flavour (abfd) == bfd_target_elf_flavour |
| && (symbol->section->flags & SEC_ELF_OCTETS)) |
| output_base *= bfd_octets_per_byte (abfd, input_section); |
| |
| relocation += output_base; |
| |
| /* Add in supplied addend. */ |
| relocation += reloc_entry->addend; |
| |
| /* Here the variable relocation holds the final address of the |
| symbol we are relocating against, plus any addend. */ |
| |
| if (howto->pc_relative) |
| { |
| relocation -= input_section->vma; |
| |
| if (howto->pcrel_offset && howto->partial_inplace) |
| relocation -= reloc_entry->address; |
| } |
| } |
| |
| if (!howto->partial_inplace) |
| { |
| reloc_entry->addend = relocation; |
| return flag; |
| } |
| |
| if (!howto->install_addend |
| && abfd->xvec->flavour == bfd_target_coff_flavour) |
| { |
| /* This is just weird. We're subtracting out the original |
| addend, so that for COFF the addend is ignored??? */ |
| relocation -= reloc_entry->addend; |
| /* FIXME: There should be no target specific code here... */ |
| if (strcmp (abfd->xvec->name, "coff-z8k") != 0) |
| reloc_entry->addend = 0; |
| } |
| else |
| reloc_entry->addend = relocation; |
| |
| /* Is the address of the relocation really within the section? */ |
| octets = reloc_entry->address * bfd_octets_per_byte (abfd, input_section); |
| if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets)) |
| return bfd_reloc_outofrange; |
| |
| /* FIXME: This overflow checking is incomplete, because the value |
| might have overflowed before we get here. For a correct check we |
| need to compute the value in a size larger than bitsize, but we |
| can't reasonably do that for a reloc the same size as a host |
| machine word. */ |
| if (howto->complain_on_overflow != complain_overflow_dont) |
| flag = bfd_check_overflow (howto->complain_on_overflow, |
| howto->bitsize, |
| howto->rightshift, |
| bfd_arch_bits_per_address (abfd), |
| relocation); |
| |
| relocation >>= (bfd_vma) howto->rightshift; |
| |
| /* Shift everything up to where it's going to be used. */ |
| relocation <<= (bfd_vma) howto->bitpos; |
| |
| data = (bfd_byte *) data_start + (octets - data_start_offset); |
| apply_reloc (abfd, data, howto, relocation); |
| return flag; |
| } |
| |
| /* This relocation routine is used by some of the backend linkers. |
| They do not construct asymbol or arelent structures, so there is no |
| reason for them to use bfd_perform_relocation. Also, |
| bfd_perform_relocation is so hacked up it is easier to write a new |
| function than to try to deal with it. |
| |
| This routine does a final relocation. Whether it is useful for a |
| relocatable link depends upon how the object format defines |
| relocations. |
| |
| FIXME: This routine ignores any special_function in the HOWTO, |
| since the existing special_function values have been written for |
| bfd_perform_relocation. |
| |
| HOWTO is the reloc howto information. |
| INPUT_BFD is the BFD which the reloc applies to. |
| INPUT_SECTION is the section which the reloc applies to. |
| CONTENTS is the contents of the section. |
| ADDRESS is the address of the reloc within INPUT_SECTION. |
| VALUE is the value of the symbol the reloc refers to. |
| ADDEND is the addend of the reloc. */ |
| |
| bfd_reloc_status_type |
| _bfd_final_link_relocate (reloc_howto_type *howto, |
| bfd *input_bfd, |
| asection *input_section, |
| bfd_byte *contents, |
| bfd_vma address, |
| bfd_vma value, |
| bfd_vma addend) |
| { |
| bfd_vma relocation; |
| bfd_size_type octets = (address |
| * bfd_octets_per_byte (input_bfd, input_section)); |
| |
| /* Sanity check the address. */ |
| if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets)) |
| return bfd_reloc_outofrange; |
| |
| /* This function assumes that we are dealing with a basic relocation |
| against a symbol. We want to compute the value of the symbol to |
| relocate to. This is just VALUE, the value of the symbol, plus |
| ADDEND, any addend associated with the reloc. */ |
| relocation = value + addend; |
| |
| /* If the relocation is PC relative, we want to set RELOCATION to |
| the distance between the symbol (currently in RELOCATION) and the |
| location we are relocating. Some targets (e.g., i386-aout) |
| arrange for the contents of the section to be the negative of the |
| offset of the location within the section; for such targets |
| pcrel_offset is FALSE. Other targets (e.g., ELF) simply leave |
| the contents of the section as zero; for such targets |
| pcrel_offset is TRUE. If pcrel_offset is FALSE we do not need to |
| subtract out the offset of the location within the section (which |
| is just ADDRESS). */ |
| if (howto->pc_relative) |
| { |
| relocation -= (input_section->output_section->vma |
| + input_section->output_offset); |
| if (howto->pcrel_offset) |
| relocation -= address; |
| } |
| |
| return _bfd_relocate_contents (howto, input_bfd, relocation, |
| contents + octets); |
| } |
| |
| /* Relocate a given location using a given value and howto. */ |
| |
| bfd_reloc_status_type |
| _bfd_relocate_contents (reloc_howto_type *howto, |
| bfd *input_bfd, |
| bfd_vma relocation, |
| bfd_byte *location) |
| { |
| bfd_vma x; |
| bfd_reloc_status_type flag; |
| unsigned int rightshift = howto->rightshift; |
| unsigned int bitpos = howto->bitpos; |
| |
| if (howto->negate) |
| relocation = -relocation; |
| |
| /* Get the value we are going to relocate. */ |
| x = read_reloc (input_bfd, location, howto); |
| |
| /* Check for overflow. FIXME: We may drop bits during the addition |
| which we don't check for. We must either check at every single |
| operation, which would be tedious, or we must do the computations |
| in a type larger than bfd_vma, which would be inefficient. */ |
| flag = bfd_reloc_ok; |
| if (howto->complain_on_overflow != complain_overflow_dont) |
| { |
| bfd_vma addrmask, fieldmask, signmask, ss; |
| bfd_vma a, b, sum; |
| |
| /* Get the values to be added together. For signed and unsigned |
| relocations, we assume that all values should be truncated to |
| the size of an address. For bitfields, all the bits matter. |
| See also bfd_check_overflow. */ |
| fieldmask = N_ONES (howto->bitsize); |
| signmask = ~fieldmask; |
| addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd)) |
| | (fieldmask << rightshift)); |
| a = (relocation & addrmask) >> rightshift; |
| b = (x & howto->src_mask & addrmask) >> bitpos; |
| addrmask >>= rightshift; |
| |
| switch (howto->complain_on_overflow) |
| { |
| case complain_overflow_signed: |
| /* If any sign bits are set, all sign bits must be set. |
| That is, A must be a valid negative address after |
| shifting. */ |
| signmask = ~(fieldmask >> 1); |
| /* Fall thru */ |
| |
| case complain_overflow_bitfield: |
| /* Much like the signed check, but for a field one bit |
| wider. We allow a bitfield to represent numbers in the |
| range -2**n to 2**n-1, where n is the number of bits in the |
| field. Note that when bfd_vma is 32 bits, a 32-bit reloc |
| can't overflow, which is exactly what we want. */ |
| ss = a & signmask; |
| if (ss != 0 && ss != (addrmask & signmask)) |
| flag = bfd_reloc_overflow; |
| |
| /* We only need this next bit of code if the sign bit of B |
| is below the sign bit of A. This would only happen if |
| SRC_MASK had fewer bits than BITSIZE. Note that if |
| SRC_MASK has more bits than BITSIZE, we can get into |
| trouble; we would need to verify that B is in range, as |
| we do for A above. */ |
| ss = ((~howto->src_mask) >> 1) & howto->src_mask; |
| ss >>= bitpos; |
| |
| /* Set all the bits above the sign bit. */ |
| b = (b ^ ss) - ss; |
| |
| /* Now we can do the addition. */ |
| sum = a + b; |
| |
| /* See if the result has the correct sign. Bits above the |
| sign bit are junk now; ignore them. If the sum is |
| positive, make sure we did not have all negative inputs; |
| if the sum is negative, make sure we did not have all |
| positive inputs. The test below looks only at the sign |
| bits, and it really just |
| SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM) |
| |
| We mask with addrmask here to explicitly allow an address |
| wrap-around. The Linux kernel relies on it, and it is |
| the only way to write assembler code which can run when |
| loaded at a location 0x80000000 away from the location at |
| which it is linked. */ |
| if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask) |
| flag = bfd_reloc_overflow; |
| break; |
| |
| case complain_overflow_unsigned: |
| /* Checking for an unsigned overflow is relatively easy: |
| trim the addresses and add, and trim the result as well. |
| Overflow is normally indicated when the result does not |
| fit in the field. However, we also need to consider the |
| case when, e.g., fieldmask is 0x7fffffff or smaller, an |
| input is 0x80000000, and bfd_vma is only 32 bits; then we |
| will get sum == 0, but there is an overflow, since the |
| inputs did not fit in the field. Instead of doing a |
| separate test, we can check for this by or-ing in the |
| operands when testing for the sum overflowing its final |
| field. */ |
| sum = (a + b) & addrmask; |
| if ((a | b | sum) & signmask) |
| flag = bfd_reloc_overflow; |
| break; |
| |
| default: |
| abort (); |
| } |
| } |
| |
| /* Put RELOCATION in the right bits. */ |
| relocation >>= (bfd_vma) rightshift; |
| relocation <<= (bfd_vma) bitpos; |
| |
| /* Add RELOCATION to the right bits of X. */ |
| x = ((x & ~howto->dst_mask) |
| | (((x & howto->src_mask) + relocation) & howto->dst_mask)); |
| |
| /* Put the relocated value back in the object file. */ |
| write_reloc (input_bfd, x, location, howto); |
| return flag; |
| } |
| |
| /* Clear a given location using a given howto, by applying a fixed relocation |
| value and discarding any in-place addend. This is used for fixed-up |
| relocations against discarded symbols, to make ignorable debug or unwind |
| information more obvious. */ |
| |
| bfd_reloc_status_type |
| _bfd_clear_contents (reloc_howto_type *howto, |
| bfd *input_bfd, |
| asection *input_section, |
| bfd_byte *buf, |
| bfd_vma off) |
| { |
| bfd_vma x; |
| bfd_byte *location; |
| |
| if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, off)) |
| return bfd_reloc_outofrange; |
| |
| /* Get the value we are going to relocate. */ |
| location = buf + off; |
| x = read_reloc (input_bfd, location, howto); |
| |
| /* Zero out the unwanted bits of X. */ |
| x &= ~howto->dst_mask; |
| |
| /* For a range list, use 1 instead of 0 as placeholder. 0 |
| would terminate the list, hiding any later entries. */ |
| if (strcmp (bfd_section_name (input_section), ".debug_ranges") == 0 |
| && (howto->dst_mask & 1) != 0) |
| x |= 1; |
| |
| /* Put the relocated value back in the object file. */ |
| write_reloc (input_bfd, x, location, howto); |
| return bfd_reloc_ok; |
| } |
| |
| /* |
| DOCDD |
| INODE |
| howto manager, , typedef arelent, Relocations |
| |
| SUBSECTION |
| The howto manager |
| |
| When an application wants to create a relocation, but doesn't |
| know what the target machine might call it, it can find out by |
| using this bit of code. |
| |
| */ |
| |
| /* |
| DEFINITION |
| bfd_reloc_code_real_type |
| |
| DESCRIPTION |
| The insides of a reloc code. The idea is that, eventually, there |
| will be one enumerator for every type of relocation we ever do. |
| Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll |
| return a howto pointer. |
| |
| This does mean that the application must determine the correct |
| enumerator value; you can't get a howto pointer from a random set |
| of attributes. |
| |
| SENUM |
| bfd_reloc_code_real |
| |
| ENUM |
| BFD_RELOC_64 |
| ENUMX |
| BFD_RELOC_32 |
| ENUMX |
| BFD_RELOC_26 |
| ENUMX |
| BFD_RELOC_24 |
| ENUMX |
| BFD_RELOC_16 |
| ENUMX |
| BFD_RELOC_14 |
| ENUMX |
| BFD_RELOC_8 |
| ENUMDOC |
| Basic absolute relocations of N bits. |
| |
| ENUM |
| BFD_RELOC_64_PCREL |
| ENUMX |
| BFD_RELOC_32_PCREL |
| ENUMX |
| BFD_RELOC_24_PCREL |
| ENUMX |
| BFD_RELOC_16_PCREL |
| ENUMX |
| BFD_RELOC_12_PCREL |
| ENUMX |
| BFD_RELOC_8_PCREL |
| ENUMDOC |
| PC-relative relocations. Sometimes these are relative to the |
| address of the relocation itself; sometimes they are relative to the |
| start of the section containing the relocation. It depends on the |
| specific target. |
| |
| ENUM |
| BFD_RELOC_32_SECREL |
| ENUMX |
| BFD_RELOC_16_SECIDX |
| ENUMDOC |
| Section relative relocations. Some targets need this for DWARF2. |
| |
| ENUM |
| BFD_RELOC_32_GOT_PCREL |
| ENUMX |
| BFD_RELOC_16_GOT_PCREL |
| ENUMX |
| BFD_RELOC_8_GOT_PCREL |
| ENUMX |
| BFD_RELOC_32_GOTOFF |
| ENUMX |
| BFD_RELOC_16_GOTOFF |
| ENUMX |
| BFD_RELOC_LO16_GOTOFF |
| ENUMX |
| BFD_RELOC_HI16_GOTOFF |
| ENUMX |
| BFD_RELOC_HI16_S_GOTOFF |
| ENUMX |
| BFD_RELOC_8_GOTOFF |
| ENUMX |
| BFD_RELOC_64_PLT_PCREL |
| ENUMX |
| BFD_RELOC_32_PLT_PCREL |
| ENUMX |
| BFD_RELOC_24_PLT_PCREL |
| ENUMX |
| BFD_RELOC_16_PLT_PCREL |
| ENUMX |
| BFD_RELOC_8_PLT_PCREL |
| ENUMX |
| BFD_RELOC_64_PLTOFF |
| ENUMX |
| BFD_RELOC_32_PLTOFF |
| ENUMX |
| BFD_RELOC_16_PLTOFF |
| ENUMX |
| BFD_RELOC_LO16_PLTOFF |
| ENUMX |
| BFD_RELOC_HI16_PLTOFF |
| ENUMX |
| BFD_RELOC_HI16_S_PLTOFF |
| ENUMX |
| BFD_RELOC_8_PLTOFF |
| ENUMDOC |
| For ELF. |
| |
| ENUM |
| BFD_RELOC_SIZE32 |
| ENUMX |
| BFD_RELOC_SIZE64 |
| ENUMDOC |
| Size relocations. |
| |
| ENUM |
| BFD_RELOC_68K_GLOB_DAT |
| ENUMX |
| BFD_RELOC_68K_JMP_SLOT |
| ENUMX |
| BFD_RELOC_68K_RELATIVE |
| ENUMX |
| BFD_RELOC_68K_TLS_GD32 |
| ENUMX |
| BFD_RELOC_68K_TLS_GD16 |
| ENUMX |
| BFD_RELOC_68K_TLS_GD8 |
| ENUMX |
| BFD_RELOC_68K_TLS_LDM32 |
| ENUMX |
| BFD_RELOC_68K_TLS_LDM16 |
| ENUMX |
| BFD_RELOC_68K_TLS_LDM8 |
| ENUMX |
| BFD_RELOC_68K_TLS_LDO32 |
| ENUMX |
| BFD_RELOC_68K_TLS_LDO16 |
| ENUMX |
| BFD_RELOC_68K_TLS_LDO8 |
| ENUMX |
| BFD_RELOC_68K_TLS_IE32 |
| ENUMX |
| BFD_RELOC_68K_TLS_IE16 |
| ENUMX |
| BFD_RELOC_68K_TLS_IE8 |
| ENUMX |
| BFD_RELOC_68K_TLS_LE32 |
| ENUMX |
| BFD_RELOC_68K_TLS_LE16 |
| ENUMX |
| BFD_RELOC_68K_TLS_LE8 |
| ENUMDOC |
| Relocations used by 68K ELF. |
| |
| ENUM |
| BFD_RELOC_32_BASEREL |
| ENUMX |
| BFD_RELOC_16_BASEREL |
| ENUMX |
| BFD_RELOC_LO16_BASEREL |
| ENUMX |
| BFD_RELOC_HI16_BASEREL |
| ENUMX |
| BFD_RELOC_HI16_S_BASEREL |
| ENUMX |
| BFD_RELOC_8_BASEREL |
| ENUMX |
| BFD_RELOC_RVA |
| ENUMDOC |
| Linkage-table relative. |
| |
| ENUM |
| BFD_RELOC_8_FFnn |
| ENUMDOC |
| Absolute 8-bit relocation, but used to form an address like 0xFFnn. |
| |
| ENUM |
| BFD_RELOC_32_PCREL_S2 |
| ENUMX |
| BFD_RELOC_16_PCREL_S2 |
| ENUMX |
| BFD_RELOC_23_PCREL_S2 |
| ENUMDOC |
| These PC-relative relocations are stored as word displacements -- |
| i.e., byte displacements shifted right two bits. The 30-bit word |
| displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the |
| SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The |
| signed 16-bit displacement is used on the MIPS, and the 23-bit |
| displacement is used on the Alpha. |
| |
| ENUM |
| BFD_RELOC_HI22 |
| ENUMX |
| BFD_RELOC_LO10 |
| ENUMDOC |
| High 22 bits and low 10 bits of 32-bit value, placed into lower bits |
| of the target word. These are used on the SPARC. |
| |
| ENUM |
| BFD_RELOC_GPREL16 |
| ENUMX |
| BFD_RELOC_GPREL32 |
| ENUMDOC |
| For systems that allocate a Global Pointer register, these are |
| displacements off that register. These relocation types are |
| handled specially, because the value the register will have is |
| decided relatively late. |
| |
| ENUM |
| BFD_RELOC_NONE |
| ENUMX |
| BFD_RELOC_SPARC_WDISP22 |
| ENUMX |
| BFD_RELOC_SPARC22 |
| ENUMX |
| BFD_RELOC_SPARC13 |
| ENUMX |
| BFD_RELOC_SPARC_GOT10 |
| ENUMX |
| BFD_RELOC_SPARC_GOT13 |
| ENUMX |
| BFD_RELOC_SPARC_GOT22 |
| ENUMX |
| BFD_RELOC_SPARC_PC10 |
| ENUMX |
| BFD_RELOC_SPARC_PC22 |
| ENUMX |
| BFD_RELOC_SPARC_WPLT30 |
| ENUMX |
| BFD_RELOC_SPARC_COPY |
| ENUMX |
| BFD_RELOC_SPARC_GLOB_DAT |
| ENUMX |
| BFD_RELOC_SPARC_JMP_SLOT |
| ENUMX |
| BFD_RELOC_SPARC_RELATIVE |
| ENUMX |
| BFD_RELOC_SPARC_UA16 |
| ENUMX |
| BFD_RELOC_SPARC_UA32 |
| ENUMX |
| BFD_RELOC_SPARC_UA64 |
| ENUMX |
| BFD_RELOC_SPARC_GOTDATA_HIX22 |
| ENUMX |
| BFD_RELOC_SPARC_GOTDATA_LOX10 |
| ENUMX |
| BFD_RELOC_SPARC_GOTDATA_OP_HIX22 |
| ENUMX |
| BFD_RELOC_SPARC_GOTDATA_OP_LOX10 |
| ENUMX |
| BFD_RELOC_SPARC_GOTDATA_OP |
| ENUMX |
| BFD_RELOC_SPARC_JMP_IREL |
| ENUMX |
| BFD_RELOC_SPARC_IRELATIVE |
| ENUMDOC |
| SPARC ELF relocations. There is probably some overlap with other |
| relocation types already defined. |
| |
| ENUM |
| BFD_RELOC_SPARC_BASE13 |
| ENUMX |
| BFD_RELOC_SPARC_BASE22 |
| ENUMDOC |
| I think these are specific to SPARC a.out (e.g., Sun 4). |
| |
| ENUMEQ |
| BFD_RELOC_SPARC_64 |
| BFD_RELOC_64 |
| ENUMX |
| BFD_RELOC_SPARC_10 |
| ENUMX |
| BFD_RELOC_SPARC_11 |
| ENUMX |
| BFD_RELOC_SPARC_OLO10 |
| ENUMX |
| BFD_RELOC_SPARC_HH22 |
| ENUMX |
| BFD_RELOC_SPARC_HM10 |
| ENUMX |
| BFD_RELOC_SPARC_LM22 |
| ENUMX |
| BFD_RELOC_SPARC_PC_HH22 |
| ENUMX |
| BFD_RELOC_SPARC_PC_HM10 |
| ENUMX |
| BFD_RELOC_SPARC_PC_LM22 |
| ENUMX |
| BFD_RELOC_SPARC_WDISP16 |
| ENUMX |
| BFD_RELOC_SPARC_WDISP19 |
| ENUMX |
| BFD_RELOC_SPARC_7 |
| ENUMX |
| BFD_RELOC_SPARC_6 |
| ENUMX |
| BFD_RELOC_SPARC_5 |
| ENUMEQX |
| BFD_RELOC_SPARC_DISP64 |
| BFD_RELOC_64_PCREL |
| ENUMX |
| BFD_RELOC_SPARC_PLT32 |
| ENUMX |
| BFD_RELOC_SPARC_PLT64 |
| ENUMX |
| BFD_RELOC_SPARC_HIX22 |
| ENUMX |
| BFD_RELOC_SPARC_LOX10 |
| ENUMX |
| BFD_RELOC_SPARC_H44 |
| ENUMX |
| BFD_RELOC_SPARC_M44 |
| ENUMX |
| BFD_RELOC_SPARC_L44 |
| ENUMX |
| BFD_RELOC_SPARC_REGISTER |
| ENUMX |
| BFD_RELOC_SPARC_H34 |
| ENUMX |
| BFD_RELOC_SPARC_SIZE32 |
| ENUMX |
| BFD_RELOC_SPARC_SIZE64 |
| ENUMX |
| BFD_RELOC_SPARC_WDISP10 |
| ENUMDOC |
| SPARC64 relocations. |
| |
| ENUM |
| BFD_RELOC_SPARC_REV32 |
| ENUMDOC |
| SPARC little endian relocation. |
| ENUM |
| BFD_RELOC_SPARC_TLS_GD_HI22 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_GD_LO10 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_GD_ADD |
| ENUMX |
| BFD_RELOC_SPARC_TLS_GD_CALL |
| ENUMX |
| BFD_RELOC_SPARC_TLS_LDM_HI22 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_LDM_LO10 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_LDM_ADD |
| ENUMX |
| BFD_RELOC_SPARC_TLS_LDM_CALL |
| ENUMX |
| BFD_RELOC_SPARC_TLS_LDO_HIX22 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_LDO_LOX10 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_LDO_ADD |
| ENUMX |
| BFD_RELOC_SPARC_TLS_IE_HI22 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_IE_LO10 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_IE_LD |
| ENUMX |
| BFD_RELOC_SPARC_TLS_IE_LDX |
| ENUMX |
| BFD_RELOC_SPARC_TLS_IE_ADD |
| ENUMX |
| BFD_RELOC_SPARC_TLS_LE_HIX22 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_LE_LOX10 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_DTPMOD64 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_DTPOFF32 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_DTPOFF64 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_TPOFF32 |
| ENUMX |
| BFD_RELOC_SPARC_TLS_TPOFF64 |
| ENUMDOC |
| SPARC TLS relocations. |
| |
| ENUM |
| BFD_RELOC_SPU_IMM7 |
| ENUMX |
| BFD_RELOC_SPU_IMM8 |
| ENUMX |
| BFD_RELOC_SPU_IMM10 |
| ENUMX |
| BFD_RELOC_SPU_IMM10W |
| ENUMX |
| BFD_RELOC_SPU_IMM16 |
| ENUMX |
| BFD_RELOC_SPU_IMM16W |
| ENUMX |
| BFD_RELOC_SPU_IMM18 |
| ENUMX |
| BFD_RELOC_SPU_PCREL9a |
| ENUMX |
| BFD_RELOC_SPU_PCREL9b |
| ENUMX |
| BFD_RELOC_SPU_PCREL16 |
| ENUMX |
| BFD_RELOC_SPU_LO16 |
| ENUMX |
| BFD_RELOC_SPU_HI16 |
| ENUMX |
| BFD_RELOC_SPU_PPU32 |
| ENUMX |
| BFD_RELOC_SPU_PPU64 |
| ENUMX |
| BFD_RELOC_SPU_ADD_PIC |
| ENUMDOC |
| SPU Relocations. |
| |
| ENUM |
| BFD_RELOC_ALPHA_GPDISP_HI16 |
| ENUMDOC |
| Alpha ECOFF and ELF relocations. Some of these treat the symbol or |
| "addend" in some special way. |
| For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when |
| writing; when reading, it will be the absolute section symbol. The |
| addend is the displacement in bytes of the "lda" instruction from |
| the "ldah" instruction (which is at the address of this reloc). |
| ENUM |
| BFD_RELOC_ALPHA_GPDISP_LO16 |
| ENUMDOC |
| For GPDISP_LO16 ("ignore") relocations, the symbol is handled as |
| with GPDISP_HI16 relocs. The addend is ignored when writing the |
| relocations out, and is filled in with the file's GP value on |
| reading, for convenience. |
| |
| ENUM |
| BFD_RELOC_ALPHA_GPDISP |
| ENUMDOC |
| The ELF GPDISP relocation is exactly the same as the GPDISP_HI16 |
| relocation except that there is no accompanying GPDISP_LO16 |
| relocation. |
| |
| ENUM |
| BFD_RELOC_ALPHA_LITERAL |
| ENUMX |
| BFD_RELOC_ALPHA_ELF_LITERAL |
| ENUMX |
| BFD_RELOC_ALPHA_LITUSE |
| ENUMDOC |
| The Alpha LITERAL/LITUSE relocs are produced by a symbol reference; |
| the assembler turns it into a LDQ instruction to load the address of |
| the symbol, and then fills in a register in the real instruction. |
| |
| The LITERAL reloc, at the LDQ instruction, refers to the .lita |
| section symbol. The addend is ignored when writing, but is filled |
| in with the file's GP value on reading, for convenience, as with the |
| GPDISP_LO16 reloc. |
| |
| The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16. |
| It should refer to the symbol to be referenced, as with 16_GOTOFF, |
| but it generates output not based on the position within the .got |
| section, but relative to the GP value chosen for the file during the |
| final link stage. |
| |
| The LITUSE reloc, on the instruction using the loaded address, gives |
| information to the linker that it might be able to use to optimize |
| away some literal section references. The symbol is ignored (read |
| as the absolute section symbol), and the "addend" indicates the type |
| of instruction using the register: |
| 1 - "memory" fmt insn |
| 2 - byte-manipulation (byte offset reg) |
| 3 - jsr (target of branch) |
| |
| ENUM |
| BFD_RELOC_ALPHA_HINT |
| ENUMDOC |
| The HINT relocation indicates a value that should be filled into the |
| "hint" field of a jmp/jsr/ret instruction, for possible branch- |
| prediction logic which may be provided on some processors. |
| |
| ENUM |
| BFD_RELOC_ALPHA_LINKAGE |
| ENUMDOC |
| The LINKAGE relocation outputs a linkage pair in the object file, |
| which is filled by the linker. |
| |
| ENUM |
| BFD_RELOC_ALPHA_CODEADDR |
| ENUMDOC |
| The CODEADDR relocation outputs a STO_CA in the object file, |
| which is filled by the linker. |
| |
| ENUM |
| BFD_RELOC_ALPHA_GPREL_HI16 |
| ENUMX |
| BFD_RELOC_ALPHA_GPREL_LO16 |
| ENUMDOC |
| The GPREL_HI/LO relocations together form a 32-bit offset from the |
| GP register. |
| |
| ENUM |
| BFD_RELOC_ALPHA_BRSGP |
| ENUMDOC |
| Like BFD_RELOC_23_PCREL_S2, except that the source and target must |
| share a common GP, and the target address is adjusted for |
| STO_ALPHA_STD_GPLOAD. |
| |
| ENUM |
| BFD_RELOC_ALPHA_NOP |
| ENUMDOC |
| The NOP relocation outputs a NOP if the longword displacement |
| between two procedure entry points is < 2^21. |
| |
| ENUM |
| BFD_RELOC_ALPHA_BSR |
| ENUMDOC |
| The BSR relocation outputs a BSR if the longword displacement |
| between two procedure entry points is < 2^21. |
| |
| ENUM |
| BFD_RELOC_ALPHA_LDA |
| ENUMDOC |
| The LDA relocation outputs a LDA if the longword displacement |
| between two procedure entry points is < 2^16. |
| |
| ENUM |
| BFD_RELOC_ALPHA_BOH |
| ENUMDOC |
| The BOH relocation outputs a BSR if the longword displacement |
| between two procedure entry points is < 2^21, or else a hint. |
| |
| ENUM |
| BFD_RELOC_ALPHA_TLSGD |
| ENUMX |
| BFD_RELOC_ALPHA_TLSLDM |
| ENUMX |
| BFD_RELOC_ALPHA_DTPMOD64 |
| ENUMX |
| BFD_RELOC_ALPHA_GOTDTPREL16 |
| ENUMX |
| BFD_RELOC_ALPHA_DTPREL64 |
| ENUMX |
| BFD_RELOC_ALPHA_DTPREL_HI16 |
| ENUMX |
| BFD_RELOC_ALPHA_DTPREL_LO16 |
| ENUMX |
| BFD_RELOC_ALPHA_DTPREL16 |
| ENUMX |
| BFD_RELOC_ALPHA_GOTTPREL16 |
| ENUMX |
| BFD_RELOC_ALPHA_TPREL64 |
| ENUMX |
| BFD_RELOC_ALPHA_TPREL_HI16 |
| ENUMX |
| BFD_RELOC_ALPHA_TPREL_LO16 |
| ENUMX |
| BFD_RELOC_ALPHA_TPREL16 |
| ENUMDOC |
| Alpha thread-local storage relocations. |
| |
| ENUM |
| BFD_RELOC_MIPS_JMP |
| ENUMX |
| BFD_RELOC_MICROMIPS_JMP |
| ENUMDOC |
| The MIPS jump instruction. |
| |
| ENUM |
| BFD_RELOC_MIPS16_JMP |
| ENUMDOC |
| The MIPS16 jump instruction. |
| |
| ENUM |
| BFD_RELOC_MIPS16_GPREL |
| ENUMDOC |
| MIPS16 GP relative reloc. |
| |
| ENUM |
| BFD_RELOC_HI16 |
| ENUMDOC |
| High 16 bits of 32-bit value; simple reloc. |
| |
| ENUM |
| BFD_RELOC_HI16_S |
| ENUMDOC |
| High 16 bits of 32-bit value but the low 16 bits will be sign |
| extended and added to form the final result. If the low 16 |
| bits form a negative number, we need to add one to the high value |
| to compensate for the borrow when the low bits are added. |
| |
| ENUM |
| BFD_RELOC_LO16 |
| ENUMDOC |
| Low 16 bits. |
| |
| ENUM |
| BFD_RELOC_HI16_PCREL |
| ENUMDOC |
| High 16 bits of 32-bit pc-relative value. |
| ENUM |
| BFD_RELOC_HI16_S_PCREL |
| ENUMDOC |
| High 16 bits of 32-bit pc-relative value, adjusted. |
| ENUM |
| BFD_RELOC_LO16_PCREL |
| ENUMDOC |
| Low 16 bits of pc-relative value. |
| |
| ENUM |
| BFD_RELOC_MIPS16_GOT16 |
| ENUMX |
| BFD_RELOC_MIPS16_CALL16 |
| ENUMDOC |
| Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of |
| 16-bit immediate fields. |
| ENUM |
| BFD_RELOC_MIPS16_HI16 |
| ENUMDOC |
| MIPS16 high 16 bits of 32-bit value. |
| ENUM |
| BFD_RELOC_MIPS16_HI16_S |
| ENUMDOC |
| MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign |
| extended and added to form the final result. If the low 16 |
| bits form a negative number, we need to add one to the high value |
| to compensate for the borrow when the low bits are added. |
| ENUM |
| BFD_RELOC_MIPS16_LO16 |
| ENUMDOC |
| MIPS16 low 16 bits. |
| |
| ENUM |
| BFD_RELOC_MIPS16_TLS_GD |
| ENUMX |
| BFD_RELOC_MIPS16_TLS_LDM |
| ENUMX |
| BFD_RELOC_MIPS16_TLS_DTPREL_HI16 |
| ENUMX |
| BFD_RELOC_MIPS16_TLS_DTPREL_LO16 |
| ENUMX |
| BFD_RELOC_MIPS16_TLS_GOTTPREL |
| ENUMX |
| BFD_RELOC_MIPS16_TLS_TPREL_HI16 |
| ENUMX |
| BFD_RELOC_MIPS16_TLS_TPREL_LO16 |
| ENUMDOC |
| MIPS16 TLS relocations. |
| |
| ENUM |
| BFD_RELOC_MIPS_LITERAL |
| ENUMX |
| BFD_RELOC_MICROMIPS_LITERAL |
| ENUMDOC |
| Relocation against a MIPS literal section. |
| |
| ENUM |
| BFD_RELOC_MICROMIPS_7_PCREL_S1 |
| ENUMX |
| BFD_RELOC_MICROMIPS_10_PCREL_S1 |
| ENUMX |
| BFD_RELOC_MICROMIPS_16_PCREL_S1 |
| ENUMDOC |
| microMIPS PC-relative relocations. |
| |
| ENUM |
| BFD_RELOC_MIPS16_16_PCREL_S1 |
| ENUMDOC |
| MIPS16 PC-relative relocation. |
| |
| ENUM |
| BFD_RELOC_MIPS_21_PCREL_S2 |
| ENUMX |
| BFD_RELOC_MIPS_26_PCREL_S2 |
| ENUMX |
| BFD_RELOC_MIPS_18_PCREL_S3 |
| ENUMX |
| BFD_RELOC_MIPS_19_PCREL_S2 |
| ENUMDOC |
| MIPS PC-relative relocations. |
| |
| ENUM |
| BFD_RELOC_MICROMIPS_GPREL16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_HI16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_HI16_S |
| ENUMX |
| BFD_RELOC_MICROMIPS_LO16 |
| ENUMDOC |
| microMIPS versions of generic BFD relocs. |
| |
| ENUM |
| BFD_RELOC_MIPS_GOT16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_GOT16 |
| ENUMX |
| BFD_RELOC_MIPS_CALL16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_CALL16 |
| ENUMX |
| BFD_RELOC_MIPS_GOT_HI16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_GOT_HI16 |
| ENUMX |
| BFD_RELOC_MIPS_GOT_LO16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_GOT_LO16 |
| ENUMX |
| BFD_RELOC_MIPS_CALL_HI16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_CALL_HI16 |
| ENUMX |
| BFD_RELOC_MIPS_CALL_LO16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_CALL_LO16 |
| ENUMX |
| BFD_RELOC_MIPS_SUB |
| ENUMX |
| BFD_RELOC_MICROMIPS_SUB |
| ENUMX |
| BFD_RELOC_MIPS_GOT_PAGE |
| ENUMX |
| BFD_RELOC_MICROMIPS_GOT_PAGE |
| ENUMX |
| BFD_RELOC_MIPS_GOT_OFST |
| ENUMX |
| BFD_RELOC_MICROMIPS_GOT_OFST |
| ENUMX |
| BFD_RELOC_MIPS_GOT_DISP |
| ENUMX |
| BFD_RELOC_MICROMIPS_GOT_DISP |
| ENUMX |
| BFD_RELOC_MIPS_SHIFT5 |
| ENUMX |
| BFD_RELOC_MIPS_SHIFT6 |
| ENUMX |
| BFD_RELOC_MIPS_INSERT_A |
| ENUMX |
| BFD_RELOC_MIPS_INSERT_B |
| ENUMX |
| BFD_RELOC_MIPS_DELETE |
| ENUMX |
| BFD_RELOC_MIPS_HIGHEST |
| ENUMX |
| BFD_RELOC_MICROMIPS_HIGHEST |
| ENUMX |
| BFD_RELOC_MIPS_HIGHER |
| ENUMX |
| BFD_RELOC_MICROMIPS_HIGHER |
| ENUMX |
| BFD_RELOC_MIPS_SCN_DISP |
| ENUMX |
| BFD_RELOC_MICROMIPS_SCN_DISP |
| ENUMX |
| BFD_RELOC_MIPS_16 |
| ENUMX |
| BFD_RELOC_MIPS_RELGOT |
| ENUMX |
| BFD_RELOC_MIPS_JALR |
| ENUMX |
| BFD_RELOC_MICROMIPS_JALR |
| ENUMX |
| BFD_RELOC_MIPS_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_MIPS_TLS_DTPREL32 |
| ENUMX |
| BFD_RELOC_MIPS_TLS_DTPMOD64 |
| ENUMX |
| BFD_RELOC_MIPS_TLS_DTPREL64 |
| ENUMX |
| BFD_RELOC_MIPS_TLS_GD |
| ENUMX |
| BFD_RELOC_MICROMIPS_TLS_GD |
| ENUMX |
| BFD_RELOC_MIPS_TLS_LDM |
| ENUMX |
| BFD_RELOC_MICROMIPS_TLS_LDM |
| ENUMX |
| BFD_RELOC_MIPS_TLS_DTPREL_HI16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16 |
| ENUMX |
| BFD_RELOC_MIPS_TLS_DTPREL_LO16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16 |
| ENUMX |
| BFD_RELOC_MIPS_TLS_GOTTPREL |
| ENUMX |
| BFD_RELOC_MICROMIPS_TLS_GOTTPREL |
| ENUMX |
| BFD_RELOC_MIPS_TLS_TPREL32 |
| ENUMX |
| BFD_RELOC_MIPS_TLS_TPREL64 |
| ENUMX |
| BFD_RELOC_MIPS_TLS_TPREL_HI16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_TLS_TPREL_HI16 |
| ENUMX |
| BFD_RELOC_MIPS_TLS_TPREL_LO16 |
| ENUMX |
| BFD_RELOC_MICROMIPS_TLS_TPREL_LO16 |
| ENUMX |
| BFD_RELOC_MIPS_EH |
| ENUMDOC |
| MIPS ELF relocations. |
| |
| ENUM |
| BFD_RELOC_MIPS_COPY |
| ENUMX |
| BFD_RELOC_MIPS_JUMP_SLOT |
| ENUMDOC |
| MIPS ELF relocations (VxWorks and PLT extensions). |
| |
| ENUM |
| BFD_RELOC_MOXIE_10_PCREL |
| ENUMDOC |
| Moxie ELF relocations. |
| |
| ENUM |
| BFD_RELOC_FT32_10 |
| ENUMX |
| BFD_RELOC_FT32_20 |
| ENUMX |
| BFD_RELOC_FT32_17 |
| ENUMX |
| BFD_RELOC_FT32_18 |
| ENUMX |
| BFD_RELOC_FT32_RELAX |
| ENUMX |
| BFD_RELOC_FT32_SC0 |
| ENUMX |
| BFD_RELOC_FT32_SC1 |
| ENUMX |
| BFD_RELOC_FT32_15 |
| ENUMX |
| BFD_RELOC_FT32_DIFF32 |
| ENUMDOC |
| FT32 ELF relocations. |
| |
| ENUM |
| BFD_RELOC_FRV_LABEL16 |
| ENUMX |
| BFD_RELOC_FRV_LABEL24 |
| ENUMX |
| BFD_RELOC_FRV_LO16 |
| ENUMX |
| BFD_RELOC_FRV_HI16 |
| ENUMX |
| BFD_RELOC_FRV_GPREL12 |
| ENUMX |
| BFD_RELOC_FRV_GPRELU12 |
| ENUMX |
| BFD_RELOC_FRV_GPREL32 |
| ENUMX |
| BFD_RELOC_FRV_GPRELHI |
| ENUMX |
| BFD_RELOC_FRV_GPRELLO |
| ENUMX |
| BFD_RELOC_FRV_GOT12 |
| ENUMX |
| BFD_RELOC_FRV_GOTHI |
| ENUMX |
| BFD_RELOC_FRV_GOTLO |
| ENUMX |
| BFD_RELOC_FRV_FUNCDESC |
| ENUMX |
| BFD_RELOC_FRV_FUNCDESC_GOT12 |
| ENUMX |
| BFD_RELOC_FRV_FUNCDESC_GOTHI |
| ENUMX |
| BFD_RELOC_FRV_FUNCDESC_GOTLO |
| ENUMX |
| BFD_RELOC_FRV_FUNCDESC_VALUE |
| ENUMX |
| BFD_RELOC_FRV_FUNCDESC_GOTOFF12 |
| ENUMX |
| BFD_RELOC_FRV_FUNCDESC_GOTOFFHI |
| ENUMX |
| BFD_RELOC_FRV_FUNCDESC_GOTOFFLO |
| ENUMX |
| BFD_RELOC_FRV_GOTOFF12 |
| ENUMX |
| BFD_RELOC_FRV_GOTOFFHI |
| ENUMX |
| BFD_RELOC_FRV_GOTOFFLO |
| ENUMX |
| BFD_RELOC_FRV_GETTLSOFF |
| ENUMX |
| BFD_RELOC_FRV_TLSDESC_VALUE |
| ENUMX |
| BFD_RELOC_FRV_GOTTLSDESC12 |
| ENUMX |
| BFD_RELOC_FRV_GOTTLSDESCHI |
| ENUMX |
| BFD_RELOC_FRV_GOTTLSDESCLO |
| ENUMX |
| BFD_RELOC_FRV_TLSMOFF12 |
| ENUMX |
| BFD_RELOC_FRV_TLSMOFFHI |
| ENUMX |
| BFD_RELOC_FRV_TLSMOFFLO |
| ENUMX |
| BFD_RELOC_FRV_GOTTLSOFF12 |
| ENUMX |
| BFD_RELOC_FRV_GOTTLSOFFHI |
| ENUMX |
| BFD_RELOC_FRV_GOTTLSOFFLO |
| ENUMX |
| BFD_RELOC_FRV_TLSOFF |
| ENUMX |
| BFD_RELOC_FRV_TLSDESC_RELAX |
| ENUMX |
| BFD_RELOC_FRV_GETTLSOFF_RELAX |
| ENUMX |
| BFD_RELOC_FRV_TLSOFF_RELAX |
| ENUMX |
| BFD_RELOC_FRV_TLSMOFF |
| ENUMDOC |
| Fujitsu Frv Relocations. |
| |
| ENUM |
| BFD_RELOC_MN10300_GOTOFF24 |
| ENUMDOC |
| This is a 24bit GOT-relative reloc for the mn10300. |
| ENUM |
| BFD_RELOC_MN10300_GOT32 |
| ENUMDOC |
| This is a 32bit GOT-relative reloc for the mn10300, offset by two |
| bytes in the instruction. |
| ENUM |
| BFD_RELOC_MN10300_GOT24 |
| ENUMDOC |
| This is a 24bit GOT-relative reloc for the mn10300, offset by two |
| bytes in the instruction. |
| ENUM |
| BFD_RELOC_MN10300_GOT16 |
| ENUMDOC |
| This is a 16bit GOT-relative reloc for the mn10300, offset by two |
| bytes in the instruction. |
| ENUM |
| BFD_RELOC_MN10300_COPY |
| ENUMDOC |
| Copy symbol at runtime. |
| ENUM |
| BFD_RELOC_MN10300_GLOB_DAT |
| ENUMDOC |
| Create GOT entry. |
| ENUM |
| BFD_RELOC_MN10300_JMP_SLOT |
| ENUMDOC |
| Create PLT entry. |
| ENUM |
| BFD_RELOC_MN10300_RELATIVE |
| ENUMDOC |
| Adjust by program base. |
| ENUM |
| BFD_RELOC_MN10300_SYM_DIFF |
| ENUMDOC |
| Together with another reloc targeted at the same location, allows |
| for a value that is the difference of two symbols in the same |
| section. |
| ENUM |
| BFD_RELOC_MN10300_ALIGN |
| ENUMDOC |
| The addend of this reloc is an alignment power that must be honoured |
| at the offset's location, regardless of linker relaxation. |
| ENUM |
| BFD_RELOC_MN10300_TLS_GD |
| ENUMX |
| BFD_RELOC_MN10300_TLS_LD |
| ENUMX |
| BFD_RELOC_MN10300_TLS_LDO |
| ENUMX |
| BFD_RELOC_MN10300_TLS_GOTIE |
| ENUMX |
| BFD_RELOC_MN10300_TLS_IE |
| ENUMX |
| BFD_RELOC_MN10300_TLS_LE |
| ENUMX |
| BFD_RELOC_MN10300_TLS_DTPMOD |
| ENUMX |
| BFD_RELOC_MN10300_TLS_DTPOFF |
| ENUMX |
| BFD_RELOC_MN10300_TLS_TPOFF |
| ENUMDOC |
| Various TLS-related relocations. |
| ENUM |
| BFD_RELOC_MN10300_32_PCREL |
| ENUMDOC |
| This is a 32bit pcrel reloc for the mn10300, offset by two bytes in |
| the instruction. |
| ENUM |
| BFD_RELOC_MN10300_16_PCREL |
| ENUMDOC |
| This is a 16bit pcrel reloc for the mn10300, offset by two bytes in |
| the instruction. |
| |
| ENUM |
| BFD_RELOC_386_GOT32 |
| ENUMX |
| BFD_RELOC_386_PLT32 |
| ENUMX |
| BFD_RELOC_386_COPY |
| ENUMX |
| BFD_RELOC_386_GLOB_DAT |
| ENUMX |
| BFD_RELOC_386_JUMP_SLOT |
| ENUMX |
| BFD_RELOC_386_RELATIVE |
| ENUMX |
| BFD_RELOC_386_GOTOFF |
| ENUMX |
| BFD_RELOC_386_GOTPC |
| ENUMX |
| BFD_RELOC_386_TLS_TPOFF |
| ENUMX |
| BFD_RELOC_386_TLS_IE |
| ENUMX |
| BFD_RELOC_386_TLS_GOTIE |
| ENUMX |
| BFD_RELOC_386_TLS_LE |
| ENUMX |
| BFD_RELOC_386_TLS_GD |
| ENUMX |
| BFD_RELOC_386_TLS_LDM |
| ENUMX |
| BFD_RELOC_386_TLS_LDO_32 |
| ENUMX |
| BFD_RELOC_386_TLS_IE_32 |
| ENUMX |
| BFD_RELOC_386_TLS_LE_32 |
| ENUMX |
| BFD_RELOC_386_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_386_TLS_DTPOFF32 |
| ENUMX |
| BFD_RELOC_386_TLS_TPOFF32 |
| ENUMX |
| BFD_RELOC_386_TLS_GOTDESC |
| ENUMX |
| BFD_RELOC_386_TLS_DESC_CALL |
| ENUMX |
| BFD_RELOC_386_TLS_DESC |
| ENUMX |
| BFD_RELOC_386_IRELATIVE |
| ENUMX |
| BFD_RELOC_386_GOT32X |
| ENUMDOC |
| i386/elf relocations. |
| |
| ENUM |
| BFD_RELOC_X86_64_GOT32 |
| ENUMX |
| BFD_RELOC_X86_64_PLT32 |
| ENUMX |
| BFD_RELOC_X86_64_COPY |
| ENUMX |
| BFD_RELOC_X86_64_GLOB_DAT |
| ENUMX |
| BFD_RELOC_X86_64_JUMP_SLOT |
| ENUMX |
| BFD_RELOC_X86_64_RELATIVE |
| ENUMX |
| BFD_RELOC_X86_64_GOTPCREL |
| ENUMX |
| BFD_RELOC_X86_64_32S |
| ENUMX |
| BFD_RELOC_X86_64_DTPMOD64 |
| ENUMX |
| BFD_RELOC_X86_64_DTPOFF64 |
| ENUMX |
| BFD_RELOC_X86_64_TPOFF64 |
| ENUMX |
| BFD_RELOC_X86_64_TLSGD |
| ENUMX |
| BFD_RELOC_X86_64_TLSLD |
| ENUMX |
| BFD_RELOC_X86_64_DTPOFF32 |
| ENUMX |
| BFD_RELOC_X86_64_GOTTPOFF |
| ENUMX |
| BFD_RELOC_X86_64_TPOFF32 |
| ENUMX |
| BFD_RELOC_X86_64_GOTOFF64 |
| ENUMX |
| BFD_RELOC_X86_64_GOTPC32 |
| ENUMX |
| BFD_RELOC_X86_64_GOT64 |
| ENUMX |
| BFD_RELOC_X86_64_GOTPCREL64 |
| ENUMX |
| BFD_RELOC_X86_64_GOTPC64 |
| ENUMX |
| BFD_RELOC_X86_64_GOTPLT64 |
| ENUMX |
| BFD_RELOC_X86_64_PLTOFF64 |
| ENUMX |
| BFD_RELOC_X86_64_GOTPC32_TLSDESC |
| ENUMX |
| BFD_RELOC_X86_64_TLSDESC_CALL |
| ENUMX |
| BFD_RELOC_X86_64_TLSDESC |
| ENUMX |
| BFD_RELOC_X86_64_IRELATIVE |
| ENUMX |
| BFD_RELOC_X86_64_PC32_BND |
| ENUMX |
| BFD_RELOC_X86_64_PLT32_BND |
| ENUMX |
| BFD_RELOC_X86_64_GOTPCRELX |
| ENUMX |
| BFD_RELOC_X86_64_REX_GOTPCRELX |
| ENUMDOC |
| x86-64/elf relocations. |
| |
| ENUM |
| BFD_RELOC_NS32K_IMM_8 |
| ENUMX |
| BFD_RELOC_NS32K_IMM_16 |
| ENUMX |
| BFD_RELOC_NS32K_IMM_32 |
| ENUMX |
| BFD_RELOC_NS32K_IMM_8_PCREL |
| ENUMX |
| BFD_RELOC_NS32K_IMM_16_PCREL |
| ENUMX |
| BFD_RELOC_NS32K_IMM_32_PCREL |
| ENUMX |
| BFD_RELOC_NS32K_DISP_8 |
| ENUMX |
| BFD_RELOC_NS32K_DISP_16 |
| ENUMX |
| BFD_RELOC_NS32K_DISP_32 |
| ENUMX |
| BFD_RELOC_NS32K_DISP_8_PCREL |
| ENUMX |
| BFD_RELOC_NS32K_DISP_16_PCREL |
| ENUMX |
| BFD_RELOC_NS32K_DISP_32_PCREL |
| ENUMDOC |
| ns32k relocations. |
| |
| ENUM |
| BFD_RELOC_PDP11_DISP_8_PCREL |
| ENUMX |
| BFD_RELOC_PDP11_DISP_6_PCREL |
| ENUMDOC |
| PDP11 relocations. |
| |
| ENUM |
| BFD_RELOC_PJ_CODE_HI16 |
| ENUMX |
| BFD_RELOC_PJ_CODE_LO16 |
| ENUMX |
| BFD_RELOC_PJ_CODE_DIR16 |
| ENUMX |
| BFD_RELOC_PJ_CODE_DIR32 |
| ENUMX |
| BFD_RELOC_PJ_CODE_REL16 |
| ENUMX |
| BFD_RELOC_PJ_CODE_REL32 |
| ENUMDOC |
| Picojava relocs. Not all of these appear in object files. |
| |
| ENUM |
| BFD_RELOC_PPC_B26 |
| ENUMX |
| BFD_RELOC_PPC_BA26 |
| ENUMX |
| BFD_RELOC_PPC_TOC16 |
| ENUMX |
| BFD_RELOC_PPC_TOC16_LO |
| ENUMX |
| BFD_RELOC_PPC_TOC16_HI |
| ENUMX |
| BFD_RELOC_PPC_B16 |
| ENUMX |
| BFD_RELOC_PPC_B16_BRTAKEN |
| ENUMX |
| BFD_RELOC_PPC_B16_BRNTAKEN |
| ENUMX |
| BFD_RELOC_PPC_BA16 |
| ENUMX |
| BFD_RELOC_PPC_BA16_BRTAKEN |
| ENUMX |
| BFD_RELOC_PPC_BA16_BRNTAKEN |
| ENUMX |
| BFD_RELOC_PPC_COPY |
| ENUMX |
| BFD_RELOC_PPC_GLOB_DAT |
| ENUMX |
| BFD_RELOC_PPC_JMP_SLOT |
| ENUMX |
| BFD_RELOC_PPC_RELATIVE |
| ENUMX |
| BFD_RELOC_PPC_LOCAL24PC |
| ENUMX |
| BFD_RELOC_PPC_EMB_NADDR32 |
| ENUMX |
| BFD_RELOC_PPC_EMB_NADDR16 |
| ENUMX |
| BFD_RELOC_PPC_EMB_NADDR16_LO |
| ENUMX |
| BFD_RELOC_PPC_EMB_NADDR16_HI |
| ENUMX |
| BFD_RELOC_PPC_EMB_NADDR16_HA |
| ENUMX |
| BFD_RELOC_PPC_EMB_SDAI16 |
| ENUMX |
| BFD_RELOC_PPC_EMB_SDA2I16 |
| ENUMX |
| BFD_RELOC_PPC_EMB_SDA2REL |
| ENUMX |
| BFD_RELOC_PPC_EMB_SDA21 |
| ENUMX |
| BFD_RELOC_PPC_EMB_MRKREF |
| ENUMX |
| BFD_RELOC_PPC_EMB_RELSEC16 |
| ENUMX |
| BFD_RELOC_PPC_EMB_RELST_LO |
| ENUMX |
| BFD_RELOC_PPC_EMB_RELST_HI |
| ENUMX |
| BFD_RELOC_PPC_EMB_RELST_HA |
| ENUMX |
| BFD_RELOC_PPC_EMB_BIT_FLD |
| ENUMX |
| BFD_RELOC_PPC_EMB_RELSDA |
| ENUMX |
| BFD_RELOC_PPC_VLE_REL8 |
| ENUMX |
| BFD_RELOC_PPC_VLE_REL15 |
| ENUMX |
| BFD_RELOC_PPC_VLE_REL24 |
| ENUMX |
| BFD_RELOC_PPC_VLE_LO16A |
| ENUMX |
| BFD_RELOC_PPC_VLE_LO16D |
| ENUMX |
| BFD_RELOC_PPC_VLE_HI16A |
| ENUMX |
| BFD_RELOC_PPC_VLE_HI16D |
| ENUMX |
| BFD_RELOC_PPC_VLE_HA16A |
| ENUMX |
| BFD_RELOC_PPC_VLE_HA16D |
| ENUMX |
| BFD_RELOC_PPC_VLE_SDA21 |
| ENUMX |
| BFD_RELOC_PPC_VLE_SDA21_LO |
| ENUMX |
| BFD_RELOC_PPC_VLE_SDAREL_LO16A |
| ENUMX |
| BFD_RELOC_PPC_VLE_SDAREL_LO16D |
| ENUMX |
| BFD_RELOC_PPC_VLE_SDAREL_HI16A |
| ENUMX |
| BFD_RELOC_PPC_VLE_SDAREL_HI16D |
| ENUMX |
| BFD_RELOC_PPC_VLE_SDAREL_HA16A |
| ENUMX |
| BFD_RELOC_PPC_VLE_SDAREL_HA16D |
| ENUMX |
| BFD_RELOC_PPC_16DX_HA |
| ENUMX |
| BFD_RELOC_PPC_REL16DX_HA |
| ENUMX |
| BFD_RELOC_PPC_NEG |
| ENUMX |
| BFD_RELOC_PPC64_HIGHER |
| ENUMX |
| BFD_RELOC_PPC64_HIGHER_S |
| ENUMX |
| BFD_RELOC_PPC64_HIGHEST |
| ENUMX |
| BFD_RELOC_PPC64_HIGHEST_S |
| ENUMX |
| BFD_RELOC_PPC64_TOC16_LO |
| ENUMX |
| BFD_RELOC_PPC64_TOC16_HI |
| ENUMX |
| BFD_RELOC_PPC64_TOC16_HA |
| ENUMX |
| BFD_RELOC_PPC64_TOC |
| ENUMX |
| BFD_RELOC_PPC64_PLTGOT16 |
| ENUMX |
| BFD_RELOC_PPC64_PLTGOT16_LO |
| ENUMX |
| BFD_RELOC_PPC64_PLTGOT16_HI |
| ENUMX |
| BFD_RELOC_PPC64_PLTGOT16_HA |
| ENUMX |
| BFD_RELOC_PPC64_ADDR16_DS |
| ENUMX |
| BFD_RELOC_PPC64_ADDR16_LO_DS |
| ENUMX |
| BFD_RELOC_PPC64_GOT16_DS |
| ENUMX |
| BFD_RELOC_PPC64_GOT16_LO_DS |
| ENUMX |
| BFD_RELOC_PPC64_PLT16_LO_DS |
| ENUMX |
| BFD_RELOC_PPC64_SECTOFF_DS |
| ENUMX |
| BFD_RELOC_PPC64_SECTOFF_LO_DS |
| ENUMX |
| BFD_RELOC_PPC64_TOC16_DS |
| ENUMX |
| BFD_RELOC_PPC64_TOC16_LO_DS |
| ENUMX |
| BFD_RELOC_PPC64_PLTGOT16_DS |
| ENUMX |
| BFD_RELOC_PPC64_PLTGOT16_LO_DS |
| ENUMX |
| BFD_RELOC_PPC64_ADDR16_HIGH |
| ENUMX |
| BFD_RELOC_PPC64_ADDR16_HIGHA |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGH |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGHA |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGHER |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGHERA |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGHEST |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGHESTA |
| ENUMX |
| BFD_RELOC_PPC64_ADDR64_LOCAL |
| ENUMX |
| BFD_RELOC_PPC64_ENTRY |
| ENUMX |
| BFD_RELOC_PPC64_REL24_NOTOC |
| ENUMX |
| BFD_RELOC_PPC64_REL24_P9NOTOC |
| ENUMX |
| BFD_RELOC_PPC64_D34 |
| ENUMX |
| BFD_RELOC_PPC64_D34_LO |
| ENUMX |
| BFD_RELOC_PPC64_D34_HI30 |
| ENUMX |
| BFD_RELOC_PPC64_D34_HA30 |
| ENUMX |
| BFD_RELOC_PPC64_PCREL34 |
| ENUMX |
| BFD_RELOC_PPC64_GOT_PCREL34 |
| ENUMX |
| BFD_RELOC_PPC64_PLT_PCREL34 |
| ENUMX |
| BFD_RELOC_PPC64_ADDR16_HIGHER34 |
| ENUMX |
| BFD_RELOC_PPC64_ADDR16_HIGHERA34 |
| ENUMX |
| BFD_RELOC_PPC64_ADDR16_HIGHEST34 |
| ENUMX |
| BFD_RELOC_PPC64_ADDR16_HIGHESTA34 |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGHER34 |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGHERA34 |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGHEST34 |
| ENUMX |
| BFD_RELOC_PPC64_REL16_HIGHESTA34 |
| ENUMX |
| BFD_RELOC_PPC64_D28 |
| ENUMX |
| BFD_RELOC_PPC64_PCREL28 |
| ENUMDOC |
| Power(rs6000) and PowerPC relocations. |
| |
| ENUM |
| BFD_RELOC_PPC_TLS |
| ENUMX |
| BFD_RELOC_PPC_TLSGD |
| ENUMX |
| BFD_RELOC_PPC_TLSLD |
| ENUMX |
| BFD_RELOC_PPC_TLSLE |
| ENUMX |
| BFD_RELOC_PPC_TLSIE |
| ENUMX |
| BFD_RELOC_PPC_TLSM |
| ENUMX |
| BFD_RELOC_PPC_TLSML |
| ENUMX |
| BFD_RELOC_PPC_DTPMOD |
| ENUMX |
| BFD_RELOC_PPC_TPREL16 |
| ENUMX |
| BFD_RELOC_PPC_TPREL16_LO |
| ENUMX |
| BFD_RELOC_PPC_TPREL16_HI |
| ENUMX |
| BFD_RELOC_PPC_TPREL16_HA |
| ENUMX |
| BFD_RELOC_PPC_TPREL |
| ENUMX |
| BFD_RELOC_PPC_DTPREL16 |
| ENUMX |
| BFD_RELOC_PPC_DTPREL16_LO |
| ENUMX |
| BFD_RELOC_PPC_DTPREL16_HI |
| ENUMX |
| BFD_RELOC_PPC_DTPREL16_HA |
| ENUMX |
| BFD_RELOC_PPC_DTPREL |
| ENUMX |
| BFD_RELOC_PPC_GOT_TLSGD16 |
| ENUMX |
| BFD_RELOC_PPC_GOT_TLSGD16_LO |
| ENUMX |
| BFD_RELOC_PPC_GOT_TLSGD16_HI |
| ENUMX |
| BFD_RELOC_PPC_GOT_TLSGD16_HA |
| ENUMX |
| BFD_RELOC_PPC_GOT_TLSLD16 |
| ENUMX |
| BFD_RELOC_PPC_GOT_TLSLD16_LO |
| ENUMX |
| BFD_RELOC_PPC_GOT_TLSLD16_HI |
| ENUMX |
| BFD_RELOC_PPC_GOT_TLSLD16_HA |
| ENUMX |
| BFD_RELOC_PPC_GOT_TPREL16 |
| ENUMX |
| BFD_RELOC_PPC_GOT_TPREL16_LO |
| ENUMX |
| BFD_RELOC_PPC_GOT_TPREL16_HI |
| ENUMX |
| BFD_RELOC_PPC_GOT_TPREL16_HA |
| ENUMX |
| BFD_RELOC_PPC_GOT_DTPREL16 |
| ENUMX |
| BFD_RELOC_PPC_GOT_DTPREL16_LO |
| ENUMX |
| BFD_RELOC_PPC_GOT_DTPREL16_HI |
| ENUMX |
| BFD_RELOC_PPC_GOT_DTPREL16_HA |
| ENUMX |
| BFD_RELOC_PPC64_TLSGD |
| ENUMX |
| BFD_RELOC_PPC64_TLSLD |
| ENUMX |
| BFD_RELOC_PPC64_TLSLE |
| ENUMX |
| BFD_RELOC_PPC64_TLSIE |
| ENUMX |
| BFD_RELOC_PPC64_TLSM |
| ENUMX |
| BFD_RELOC_PPC64_TLSML |
| ENUMX |
| BFD_RELOC_PPC64_TPREL16_DS |
| ENUMX |
| BFD_RELOC_PPC64_TPREL16_LO_DS |
| ENUMX |
| BFD_RELOC_PPC64_TPREL16_HIGH |
| ENUMX |
| BFD_RELOC_PPC64_TPREL16_HIGHA |
| ENUMX |
| BFD_RELOC_PPC64_TPREL16_HIGHER |
| ENUMX |
| BFD_RELOC_PPC64_TPREL16_HIGHERA |
| ENUMX |
| BFD_RELOC_PPC64_TPREL16_HIGHEST |
| ENUMX |
| BFD_RELOC_PPC64_TPREL16_HIGHESTA |
| ENUMX |
| BFD_RELOC_PPC64_DTPREL16_DS |
| ENUMX |
| BFD_RELOC_PPC64_DTPREL16_LO_DS |
| ENUMX |
| BFD_RELOC_PPC64_DTPREL16_HIGH |
| ENUMX |
| BFD_RELOC_PPC64_DTPREL16_HIGHA |
| ENUMX |
| BFD_RELOC_PPC64_DTPREL16_HIGHER |
| ENUMX |
| BFD_RELOC_PPC64_DTPREL16_HIGHERA |
| ENUMX |
| BFD_RELOC_PPC64_DTPREL16_HIGHEST |
| ENUMX |
| BFD_RELOC_PPC64_DTPREL16_HIGHESTA |
| ENUMX |
| BFD_RELOC_PPC64_TPREL34 |
| ENUMX |
| BFD_RELOC_PPC64_DTPREL34 |
| ENUMX |
| BFD_RELOC_PPC64_GOT_TLSGD_PCREL34 |
| ENUMX |
| BFD_RELOC_PPC64_GOT_TLSLD_PCREL34 |
| ENUMX |
| BFD_RELOC_PPC64_GOT_TPREL_PCREL34 |
| ENUMX |
| BFD_RELOC_PPC64_GOT_DTPREL_PCREL34 |
| ENUMX |
| BFD_RELOC_PPC64_TLS_PCREL |
| ENUMDOC |
| PowerPC and PowerPC64 thread-local storage relocations. |
| |
| ENUM |
| BFD_RELOC_I370_D12 |
| ENUMDOC |
| IBM 370/390 relocations. |
| |
| ENUM |
| BFD_RELOC_CTOR |
| ENUMDOC |
| The type of reloc used to build a constructor table - at the moment |
| probably a 32 bit wide absolute relocation, but the target can choose. |
| It generally does map to one of the other relocation types. |
| |
| ENUM |
| BFD_RELOC_ARM_PCREL_BRANCH |
| ENUMDOC |
| ARM 26 bit pc-relative branch. The lowest two bits must be zero and |
| are not stored in the instruction. |
| ENUM |
| BFD_RELOC_ARM_PCREL_BLX |
| ENUMDOC |
| ARM 26 bit pc-relative branch. The lowest bit must be zero and is |
| not stored in the instruction. The 2nd lowest bit comes from a 1 bit |
| field in the instruction. |
| ENUM |
| BFD_RELOC_THUMB_PCREL_BLX |
| ENUMDOC |
| Thumb 22 bit pc-relative branch. The lowest bit must be zero and is |
| not stored in the instruction. The 2nd lowest bit comes from a 1 bit |
| field in the instruction. |
| ENUM |
| BFD_RELOC_ARM_PCREL_CALL |
| ENUMDOC |
| ARM 26-bit pc-relative branch for an unconditional BL or BLX |
| instruction. |
| ENUM |
| BFD_RELOC_ARM_PCREL_JUMP |
| ENUMDOC |
| ARM 26-bit pc-relative branch for B or conditional BL instruction. |
| |
| ENUM |
| BFD_RELOC_THUMB_PCREL_BRANCH5 |
| ENUMDOC |
| ARM 5-bit pc-relative branch for Branch Future instructions. |
| |
| ENUM |
| BFD_RELOC_THUMB_PCREL_BFCSEL |
| ENUMDOC |
| ARM 6-bit pc-relative branch for BFCSEL instruction. |
| |
| ENUM |
| BFD_RELOC_ARM_THUMB_BF17 |
| ENUMDOC |
| ARM 17-bit pc-relative branch for Branch Future instructions. |
| |
| ENUM |
| BFD_RELOC_ARM_THUMB_BF13 |
| ENUMDOC |
| ARM 13-bit pc-relative branch for BFCSEL instruction. |
| |
| ENUM |
| BFD_RELOC_ARM_THUMB_BF19 |
| ENUMDOC |
| ARM 19-bit pc-relative branch for Branch Future Link instruction. |
| |
| ENUM |
| BFD_RELOC_ARM_THUMB_LOOP12 |
| ENUMDOC |
| ARM 12-bit pc-relative branch for Low Overhead Loop instructions. |
| |
| ENUM |
| BFD_RELOC_THUMB_PCREL_BRANCH7 |
| ENUMX |
| BFD_RELOC_THUMB_PCREL_BRANCH9 |
| ENUMX |
| BFD_RELOC_THUMB_PCREL_BRANCH12 |
| ENUMX |
| BFD_RELOC_THUMB_PCREL_BRANCH20 |
| ENUMX |
| BFD_RELOC_THUMB_PCREL_BRANCH23 |
| ENUMX |
| BFD_RELOC_THUMB_PCREL_BRANCH25 |
| ENUMDOC |
| Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches. |
| The lowest bit must be zero and is not stored in the instruction. |
| Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an |
| "nn" one smaller in all cases. Note further that BRANCH23 |
| corresponds to R_ARM_THM_CALL. |
| |
| ENUM |
| BFD_RELOC_ARM_OFFSET_IMM |
| ENUMDOC |
| 12-bit immediate offset, used in ARM-format ldr and str instructions. |
| |
| ENUM |
| BFD_RELOC_ARM_THUMB_OFFSET |
| ENUMDOC |
| 5-bit immediate offset, used in Thumb-format ldr and str instructions. |
| |
| ENUM |
| BFD_RELOC_ARM_TARGET1 |
| ENUMDOC |
| Pc-relative or absolute relocation depending on target. Used for |
| entries in .init_array sections. |
| ENUM |
| BFD_RELOC_ARM_ROSEGREL32 |
| ENUMDOC |
| Read-only segment base relative address. |
| ENUM |
| BFD_RELOC_ARM_SBREL32 |
| ENUMDOC |
| Data segment base relative address. |
| ENUM |
| BFD_RELOC_ARM_TARGET2 |
| ENUMDOC |
| This reloc is used for references to RTTI data from exception |
| handling tables. The actual definition depends on the target. It |
| may be a pc-relative or some form of GOT-indirect relocation. |
| ENUM |
| BFD_RELOC_ARM_PREL31 |
| ENUMDOC |
| 31-bit PC relative address. |
| ENUM |
| BFD_RELOC_ARM_MOVW |
| ENUMX |
| BFD_RELOC_ARM_MOVT |
| ENUMX |
| BFD_RELOC_ARM_MOVW_PCREL |
| ENUMX |
| BFD_RELOC_ARM_MOVT_PCREL |
| ENUMX |
| BFD_RELOC_ARM_THUMB_MOVW |
| ENUMX |
| BFD_RELOC_ARM_THUMB_MOVT |
| ENUMX |
| BFD_RELOC_ARM_THUMB_MOVW_PCREL |
| ENUMX |
| BFD_RELOC_ARM_THUMB_MOVT_PCREL |
| ENUMDOC |
| Low and High halfword relocations for MOVW and MOVT instructions. |
| |
| ENUM |
| BFD_RELOC_ARM_GOTFUNCDESC |
| ENUMX |
| BFD_RELOC_ARM_GOTOFFFUNCDESC |
| ENUMX |
| BFD_RELOC_ARM_FUNCDESC |
| ENUMX |
| BFD_RELOC_ARM_FUNCDESC_VALUE |
| ENUMX |
| BFD_RELOC_ARM_TLS_GD32_FDPIC |
| ENUMX |
| BFD_RELOC_ARM_TLS_LDM32_FDPIC |
| ENUMX |
| BFD_RELOC_ARM_TLS_IE32_FDPIC |
| ENUMDOC |
| ARM FDPIC specific relocations. |
| |
| ENUM |
| BFD_RELOC_ARM_JUMP_SLOT |
| ENUMX |
| BFD_RELOC_ARM_GLOB_DAT |
| ENUMX |
| BFD_RELOC_ARM_GOT32 |
| ENUMX |
| BFD_RELOC_ARM_PLT32 |
| ENUMX |
| BFD_RELOC_ARM_RELATIVE |
| ENUMX |
| BFD_RELOC_ARM_GOTOFF |
| ENUMX |
| BFD_RELOC_ARM_GOTPC |
| ENUMX |
| BFD_RELOC_ARM_GOT_PREL |
| ENUMDOC |
| Relocations for setting up GOTs and PLTs for shared libraries. |
| |
| ENUM |
| BFD_RELOC_ARM_TLS_GD32 |
| ENUMX |
| BFD_RELOC_ARM_TLS_LDO32 |
| ENUMX |
| BFD_RELOC_ARM_TLS_LDM32 |
| ENUMX |
| BFD_RELOC_ARM_TLS_DTPOFF32 |
| ENUMX |
| BFD_RELOC_ARM_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_ARM_TLS_TPOFF32 |
| ENUMX |
| BFD_RELOC_ARM_TLS_IE32 |
| ENUMX |
| BFD_RELOC_ARM_TLS_LE32 |
| ENUMX |
| BFD_RELOC_ARM_TLS_GOTDESC |
| ENUMX |
| BFD_RELOC_ARM_TLS_CALL |
| ENUMX |
| BFD_RELOC_ARM_THM_TLS_CALL |
| ENUMX |
| BFD_RELOC_ARM_TLS_DESCSEQ |
| ENUMX |
| BFD_RELOC_ARM_THM_TLS_DESCSEQ |
| ENUMX |
| BFD_RELOC_ARM_TLS_DESC |
| ENUMDOC |
| ARM thread-local storage relocations. |
| |
| ENUM |
| BFD_RELOC_ARM_ALU_PC_G0_NC |
| ENUMX |
| BFD_RELOC_ARM_ALU_PC_G0 |
| ENUMX |
| BFD_RELOC_ARM_ALU_PC_G1_NC |
| ENUMX |
| BFD_RELOC_ARM_ALU_PC_G1 |
| ENUMX |
| BFD_RELOC_ARM_ALU_PC_G2 |
| ENUMX |
| BFD_RELOC_ARM_LDR_PC_G0 |
| ENUMX |
| BFD_RELOC_ARM_LDR_PC_G1 |
| ENUMX |
| BFD_RELOC_ARM_LDR_PC_G2 |
| ENUMX |
| BFD_RELOC_ARM_LDRS_PC_G0 |
| ENUMX |
| BFD_RELOC_ARM_LDRS_PC_G1 |
| ENUMX |
| BFD_RELOC_ARM_LDRS_PC_G2 |
| ENUMX |
| BFD_RELOC_ARM_LDC_PC_G0 |
| ENUMX |
| BFD_RELOC_ARM_LDC_PC_G1 |
| ENUMX |
| BFD_RELOC_ARM_LDC_PC_G2 |
| ENUMX |
| BFD_RELOC_ARM_ALU_SB_G0_NC |
| ENUMX |
| BFD_RELOC_ARM_ALU_SB_G0 |
| ENUMX |
| BFD_RELOC_ARM_ALU_SB_G1_NC |
| ENUMX |
| BFD_RELOC_ARM_ALU_SB_G1 |
| ENUMX |
| BFD_RELOC_ARM_ALU_SB_G2 |
| ENUMX |
| BFD_RELOC_ARM_LDR_SB_G0 |
| ENUMX |
| BFD_RELOC_ARM_LDR_SB_G1 |
| ENUMX |
| BFD_RELOC_ARM_LDR_SB_G2 |
| ENUMX |
| BFD_RELOC_ARM_LDRS_SB_G0 |
| ENUMX |
| BFD_RELOC_ARM_LDRS_SB_G1 |
| ENUMX |
| BFD_RELOC_ARM_LDRS_SB_G2 |
| ENUMX |
| BFD_RELOC_ARM_LDC_SB_G0 |
| ENUMX |
| BFD_RELOC_ARM_LDC_SB_G1 |
| ENUMX |
| BFD_RELOC_ARM_LDC_SB_G2 |
| ENUMDOC |
| ARM group relocations. |
| |
| ENUM |
| BFD_RELOC_ARM_V4BX |
| ENUMDOC |
| Annotation of BX instructions. |
| |
| ENUM |
| BFD_RELOC_ARM_IRELATIVE |
| ENUMDOC |
| ARM support for STT_GNU_IFUNC. |
| |
| ENUM |
| BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC |
| ENUMX |
| BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC |
| ENUMX |
| BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC |
| ENUMX |
| BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC |
| ENUMDOC |
| Thumb1 relocations to support execute-only code. |
| |
| ENUM |
| BFD_RELOC_ARM_IMMEDIATE |
| ENUMX |
| BFD_RELOC_ARM_ADRL_IMMEDIATE |
| ENUMX |
| BFD_RELOC_ARM_T32_IMMEDIATE |
| ENUMX |
| BFD_RELOC_ARM_T32_ADD_IMM |
| ENUMX |
| BFD_RELOC_ARM_T32_IMM12 |
| ENUMX |
| BFD_RELOC_ARM_T32_ADD_PC12 |
| ENUMX |
| BFD_RELOC_ARM_SHIFT_IMM |
| ENUMX |
| BFD_RELOC_ARM_SMC |
| ENUMX |
| BFD_RELOC_ARM_HVC |
| ENUMX |
| BFD_RELOC_ARM_SWI |
| ENUMX |
| BFD_RELOC_ARM_MULTI |
| ENUMX |
| BFD_RELOC_ARM_CP_OFF_IMM |
| ENUMX |
| BFD_RELOC_ARM_CP_OFF_IMM_S2 |
| ENUMX |
| BFD_RELOC_ARM_T32_CP_OFF_IMM |
| ENUMX |
| BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 |
| ENUMX |
| BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM |
| ENUMX |
| BFD_RELOC_ARM_ADR_IMM |
| ENUMX |
| BFD_RELOC_ARM_LDR_IMM |
| ENUMX |
| BFD_RELOC_ARM_LITERAL |
| ENUMX |
| BFD_RELOC_ARM_IN_POOL |
| ENUMX |
| BFD_RELOC_ARM_OFFSET_IMM8 |
| ENUMX |
| BFD_RELOC_ARM_T32_OFFSET_U8 |
| ENUMX |
| BFD_RELOC_ARM_T32_OFFSET_IMM |
| ENUMX |
| BFD_RELOC_ARM_HWLITERAL |
| ENUMX |
| BFD_RELOC_ARM_THUMB_ADD |
| ENUMX |
| BFD_RELOC_ARM_THUMB_IMM |
| ENUMX |
| BFD_RELOC_ARM_THUMB_SHIFT |
| ENUMDOC |
| These relocs are only used within the ARM assembler. They are not |
| (at present) written to any object files. |
| |
| ENUM |
| BFD_RELOC_SH_PCDISP8BY2 |
| ENUMX |
| BFD_RELOC_SH_PCDISP12BY2 |
| ENUMX |
| BFD_RELOC_SH_IMM3 |
| ENUMX |
| BFD_RELOC_SH_IMM3U |
| ENUMX |
| BFD_RELOC_SH_DISP12 |
| ENUMX |
| BFD_RELOC_SH_DISP12BY2 |
| ENUMX |
| BFD_RELOC_SH_DISP12BY4 |
| ENUMX |
| BFD_RELOC_SH_DISP12BY8 |
| ENUMX |
| BFD_RELOC_SH_DISP20 |
| ENUMX |
| BFD_RELOC_SH_DISP20BY8 |
| ENUMX |
| BFD_RELOC_SH_IMM4 |
| ENUMX |
| BFD_RELOC_SH_IMM4BY2 |
| ENUMX |
| BFD_RELOC_SH_IMM4BY4 |
| ENUMX |
| BFD_RELOC_SH_IMM8 |
| ENUMX |
| BFD_RELOC_SH_IMM8BY2 |
| ENUMX |
| BFD_RELOC_SH_IMM8BY4 |
| ENUMX |
| BFD_RELOC_SH_PCRELIMM8BY2 |
| ENUMX |
| BFD_RELOC_SH_PCRELIMM8BY4 |
| ENUMX |
| BFD_RELOC_SH_SWITCH16 |
| ENUMX |
| BFD_RELOC_SH_SWITCH32 |
| ENUMX |
| BFD_RELOC_SH_USES |
| ENUMX |
| BFD_RELOC_SH_COUNT |
| ENUMX |
| BFD_RELOC_SH_ALIGN |
| ENUMX |
| BFD_RELOC_SH_CODE |
| ENUMX |
| BFD_RELOC_SH_DATA |
| ENUMX |
| BFD_RELOC_SH_LABEL |
| ENUMX |
| BFD_RELOC_SH_LOOP_START |
| ENUMX |
| BFD_RELOC_SH_LOOP_END |
| ENUMX |
| BFD_RELOC_SH_COPY |
| ENUMX |
| BFD_RELOC_SH_GLOB_DAT |
| ENUMX |
| BFD_RELOC_SH_JMP_SLOT |
| ENUMX |
| BFD_RELOC_SH_RELATIVE |
| ENUMX |
| BFD_RELOC_SH_GOTPC |
| ENUMX |
| BFD_RELOC_SH_GOT_LOW16 |
| ENUMX |
| BFD_RELOC_SH_GOT_MEDLOW16 |
| ENUMX |
| BFD_RELOC_SH_GOT_MEDHI16 |
| ENUMX |
| BFD_RELOC_SH_GOT_HI16 |
| ENUMX |
| BFD_RELOC_SH_GOTPLT_LOW16 |
| ENUMX |
| BFD_RELOC_SH_GOTPLT_MEDLOW16 |
| ENUMX |
| BFD_RELOC_SH_GOTPLT_MEDHI16 |
| ENUMX |
| BFD_RELOC_SH_GOTPLT_HI16 |
| ENUMX |
| BFD_RELOC_SH_PLT_LOW16 |
| ENUMX |
| BFD_RELOC_SH_PLT_MEDLOW16 |
| ENUMX |
| BFD_RELOC_SH_PLT_MEDHI16 |
| ENUMX |
| BFD_RELOC_SH_PLT_HI16 |
| ENUMX |
| BFD_RELOC_SH_GOTOFF_LOW16 |
| ENUMX |
| BFD_RELOC_SH_GOTOFF_MEDLOW16 |
| ENUMX |
| BFD_RELOC_SH_GOTOFF_MEDHI16 |
| ENUMX |
| BFD_RELOC_SH_GOTOFF_HI16 |
| ENUMX |
| BFD_RELOC_SH_GOTPC_LOW16 |
| ENUMX |
| BFD_RELOC_SH_GOTPC_MEDLOW16 |
| ENUMX |
| BFD_RELOC_SH_GOTPC_MEDHI16 |
| ENUMX |
| BFD_RELOC_SH_GOTPC_HI16 |
| ENUMX |
| BFD_RELOC_SH_COPY64 |
| ENUMX |
| BFD_RELOC_SH_GLOB_DAT64 |
| ENUMX |
| BFD_RELOC_SH_JMP_SLOT64 |
| ENUMX |
| BFD_RELOC_SH_RELATIVE64 |
| ENUMX |
| BFD_RELOC_SH_GOT10BY4 |
| ENUMX |
| BFD_RELOC_SH_GOT10BY8 |
| ENUMX |
| BFD_RELOC_SH_GOTPLT10BY4 |
| ENUMX |
| BFD_RELOC_SH_GOTPLT10BY8 |
| ENUMX |
| BFD_RELOC_SH_GOTPLT32 |
| ENUMX |
| BFD_RELOC_SH_SHMEDIA_CODE |
| ENUMX |
| BFD_RELOC_SH_IMMU5 |
| ENUMX |
| BFD_RELOC_SH_IMMS6 |
| ENUMX |
| BFD_RELOC_SH_IMMS6BY32 |
| ENUMX |
| BFD_RELOC_SH_IMMU6 |
| ENUMX |
| BFD_RELOC_SH_IMMS10 |
| ENUMX |
| BFD_RELOC_SH_IMMS10BY2 |
| ENUMX |
| BFD_RELOC_SH_IMMS10BY4 |
| ENUMX |
| BFD_RELOC_SH_IMMS10BY8 |
| ENUMX |
| BFD_RELOC_SH_IMMS16 |
| ENUMX |
| BFD_RELOC_SH_IMMU16 |
| ENUMX |
| BFD_RELOC_SH_IMM_LOW16 |
| ENUMX |
| BFD_RELOC_SH_IMM_LOW16_PCREL |
| ENUMX |
| BFD_RELOC_SH_IMM_MEDLOW16 |
| ENUMX |
| BFD_RELOC_SH_IMM_MEDLOW16_PCREL |
| ENUMX |
| BFD_RELOC_SH_IMM_MEDHI16 |
| ENUMX |
| BFD_RELOC_SH_IMM_MEDHI16_PCREL |
| ENUMX |
| BFD_RELOC_SH_IMM_HI16 |
| ENUMX |
| BFD_RELOC_SH_IMM_HI16_PCREL |
| ENUMX |
| BFD_RELOC_SH_PT_16 |
| ENUMX |
| BFD_RELOC_SH_TLS_GD_32 |
| ENUMX |
| BFD_RELOC_SH_TLS_LD_32 |
| ENUMX |
| BFD_RELOC_SH_TLS_LDO_32 |
| ENUMX |
| BFD_RELOC_SH_TLS_IE_32 |
| ENUMX |
| BFD_RELOC_SH_TLS_LE_32 |
| ENUMX |
| BFD_RELOC_SH_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_SH_TLS_DTPOFF32 |
| ENUMX |
| BFD_RELOC_SH_TLS_TPOFF32 |
| ENUMX |
| BFD_RELOC_SH_GOT20 |
| ENUMX |
| BFD_RELOC_SH_GOTOFF20 |
| ENUMX |
| BFD_RELOC_SH_GOTFUNCDESC |
| ENUMX |
| BFD_RELOC_SH_GOTFUNCDESC20 |
| ENUMX |
| BFD_RELOC_SH_GOTOFFFUNCDESC |
| ENUMX |
| BFD_RELOC_SH_GOTOFFFUNCDESC20 |
| ENUMX |
| BFD_RELOC_SH_FUNCDESC |
| ENUMDOC |
| Renesas / SuperH SH relocs. Not all of these appear in object files. |
| |
| ENUM |
| BFD_RELOC_ARC_NONE |
| ENUMX |
| BFD_RELOC_ARC_8 |
| ENUMX |
| BFD_RELOC_ARC_16 |
| ENUMX |
| BFD_RELOC_ARC_24 |
| ENUMX |
| BFD_RELOC_ARC_32 |
| ENUMX |
| BFD_RELOC_ARC_N8 |
| ENUMX |
| BFD_RELOC_ARC_N16 |
| ENUMX |
| BFD_RELOC_ARC_N24 |
| ENUMX |
| BFD_RELOC_ARC_N32 |
| ENUMX |
| BFD_RELOC_ARC_SDA |
| ENUMX |
| BFD_RELOC_ARC_SECTOFF |
| ENUMX |
| BFD_RELOC_ARC_S21H_PCREL |
| ENUMX |
| BFD_RELOC_ARC_S21W_PCREL |
| ENUMX |
| BFD_RELOC_ARC_S25H_PCREL |
| ENUMX |
| BFD_RELOC_ARC_S25W_PCREL |
| ENUMX |
| BFD_RELOC_ARC_SDA32 |
| ENUMX |
| BFD_RELOC_ARC_SDA_LDST |
| ENUMX |
| BFD_RELOC_ARC_SDA_LDST1 |
| ENUMX |
| BFD_RELOC_ARC_SDA_LDST2 |
| ENUMX |
| BFD_RELOC_ARC_SDA16_LD |
| ENUMX |
| BFD_RELOC_ARC_SDA16_LD1 |
| ENUMX |
| BFD_RELOC_ARC_SDA16_LD2 |
| ENUMX |
| BFD_RELOC_ARC_S13_PCREL |
| ENUMX |
| BFD_RELOC_ARC_W |
| ENUMX |
| BFD_RELOC_ARC_32_ME |
| ENUMX |
| BFD_RELOC_ARC_32_ME_S |
| ENUMX |
| BFD_RELOC_ARC_N32_ME |
| ENUMX |
| BFD_RELOC_ARC_SECTOFF_ME |
| ENUMX |
| BFD_RELOC_ARC_SDA32_ME |
| ENUMX |
| BFD_RELOC_ARC_W_ME |
| ENUMX |
| BFD_RELOC_AC_SECTOFF_U8 |
| ENUMX |
| BFD_RELOC_AC_SECTOFF_U8_1 |
| ENUMX |
| BFD_RELOC_AC_SECTOFF_U8_2 |
| ENUMX |
| BFD_RELOC_AC_SECTOFF_S9 |
| ENUMX |
| BFD_RELOC_AC_SECTOFF_S9_1 |
| ENUMX |
| BFD_RELOC_AC_SECTOFF_S9_2 |
| ENUMX |
| BFD_RELOC_ARC_SECTOFF_ME_1 |
| ENUMX |
| BFD_RELOC_ARC_SECTOFF_ME_2 |
| ENUMX |
| BFD_RELOC_ARC_SECTOFF_1 |
| ENUMX |
| BFD_RELOC_ARC_SECTOFF_2 |
| ENUMX |
| BFD_RELOC_ARC_SDA_12 |
| ENUMX |
| BFD_RELOC_ARC_SDA16_ST2 |
| ENUMX |
| BFD_RELOC_ARC_32_PCREL |
| ENUMX |
| BFD_RELOC_ARC_PC32 |
| ENUMX |
| BFD_RELOC_ARC_GOT32 |
| ENUMX |
| BFD_RELOC_ARC_GOTPC32 |
| ENUMX |
| BFD_RELOC_ARC_PLT32 |
| ENUMX |
| BFD_RELOC_ARC_COPY |
| ENUMX |
| BFD_RELOC_ARC_GLOB_DAT |
| ENUMX |
| BFD_RELOC_ARC_JMP_SLOT |
| ENUMX |
| BFD_RELOC_ARC_RELATIVE |
| ENUMX |
| BFD_RELOC_ARC_GOTOFF |
| ENUMX |
| BFD_RELOC_ARC_GOTPC |
| ENUMX |
| BFD_RELOC_ARC_S21W_PCREL_PLT |
| ENUMX |
| BFD_RELOC_ARC_S25H_PCREL_PLT |
| ENUMX |
| BFD_RELOC_ARC_TLS_DTPMOD |
| ENUMX |
| BFD_RELOC_ARC_TLS_TPOFF |
| ENUMX |
| BFD_RELOC_ARC_TLS_GD_GOT |
| ENUMX |
| BFD_RELOC_ARC_TLS_GD_LD |
| ENUMX |
| BFD_RELOC_ARC_TLS_GD_CALL |
| ENUMX |
| BFD_RELOC_ARC_TLS_IE_GOT |
| ENUMX |
| BFD_RELOC_ARC_TLS_DTPOFF |
| ENUMX |
| BFD_RELOC_ARC_TLS_DTPOFF_S9 |
| ENUMX |
| BFD_RELOC_ARC_TLS_LE_S9 |
| ENUMX |
| BFD_RELOC_ARC_TLS_LE_32 |
| ENUMX |
| BFD_RELOC_ARC_S25W_PCREL_PLT |
| ENUMX |
| BFD_RELOC_ARC_S21H_PCREL_PLT |
| ENUMX |
| BFD_RELOC_ARC_NPS_CMEM16 |
| ENUMX |
| BFD_RELOC_ARC_JLI_SECTOFF |
| ENUMDOC |
| ARC relocs. |
| |
| ENUM |
| BFD_RELOC_BFIN_16_IMM |
| ENUMDOC |
| ADI Blackfin 16 bit immediate absolute reloc. |
| ENUM |
| BFD_RELOC_BFIN_16_HIGH |
| ENUMDOC |
| ADI Blackfin 16 bit immediate absolute reloc higher 16 bits. |
| ENUM |
| BFD_RELOC_BFIN_4_PCREL |
| ENUMDOC |
| ADI Blackfin 'a' part of LSETUP. |
| ENUM |
| BFD_RELOC_BFIN_5_PCREL |
| ENUMDOC |
| ADI Blackfin. |
| ENUM |
| BFD_RELOC_BFIN_16_LOW |
| ENUMDOC |
| ADI Blackfin 16 bit immediate absolute reloc lower 16 bits. |
| ENUM |
| BFD_RELOC_BFIN_10_PCREL |
| ENUMDOC |
| ADI Blackfin. |
| ENUM |
| BFD_RELOC_BFIN_11_PCREL |
| ENUMDOC |
| ADI Blackfin 'b' part of LSETUP. |
| ENUM |
| BFD_RELOC_BFIN_12_PCREL_JUMP |
| ENUMDOC |
| ADI Blackfin. |
| ENUM |
| BFD_RELOC_BFIN_12_PCREL_JUMP_S |
| ENUMDOC |
| ADI Blackfin Short jump, pcrel. |
| ENUM |
| BFD_RELOC_BFIN_24_PCREL_CALL_X |
| ENUMDOC |
| ADI Blackfin Call.x not implemented. |
| ENUM |
| BFD_RELOC_BFIN_24_PCREL_JUMP_L |
| ENUMDOC |
| ADI Blackfin Long Jump pcrel. |
| ENUM |
| BFD_RELOC_BFIN_GOT17M4 |
| ENUMX |
| BFD_RELOC_BFIN_GOTHI |
| ENUMX |
| BFD_RELOC_BFIN_GOTLO |
| ENUMX |
| BFD_RELOC_BFIN_FUNCDESC |
| ENUMX |
| BFD_RELOC_BFIN_FUNCDESC_GOT17M4 |
| ENUMX |
| BFD_RELOC_BFIN_FUNCDESC_GOTHI |
| ENUMX |
| BFD_RELOC_BFIN_FUNCDESC_GOTLO |
| ENUMX |
| BFD_RELOC_BFIN_FUNCDESC_VALUE |
| ENUMX |
| BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4 |
| ENUMX |
| BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI |
| ENUMX |
| BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO |
| ENUMX |
| BFD_RELOC_BFIN_GOTOFF17M4 |
| ENUMX |
| BFD_RELOC_BFIN_GOTOFFHI |
| ENUMX |
| BFD_RELOC_BFIN_GOTOFFLO |
| ENUMDOC |
| ADI Blackfin FD-PIC relocations. |
| ENUM |
| BFD_RELOC_BFIN_GOT |
| ENUMDOC |
| ADI Blackfin GOT relocation. |
| ENUM |
| BFD_RELOC_BFIN_PLTPC |
| ENUMDOC |
| ADI Blackfin PLTPC relocation. |
| ENUM |
| BFD_ARELOC_BFIN_PUSH |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_CONST |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_ADD |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_SUB |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_MULT |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_DIV |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_MOD |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_LSHIFT |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_RSHIFT |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_AND |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_OR |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_XOR |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_LAND |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_LOR |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_LEN |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_NEG |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_COMP |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_PAGE |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_HWPAGE |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| ENUM |
| BFD_ARELOC_BFIN_ADDR |
| ENUMDOC |
| ADI Blackfin arithmetic relocation. |
| |
| ENUM |
| BFD_RELOC_D10V_10_PCREL_R |
| ENUMDOC |
| Mitsubishi D10V relocs. |
| This is a 10-bit reloc with the right 2 bits assumed to be 0. |
| ENUM |
| BFD_RELOC_D10V_10_PCREL_L |
| ENUMDOC |
| Mitsubishi D10V relocs. |
| This is a 10-bit reloc with the right 2 bits assumed to be 0. This |
| is the same as the previous reloc except it is in the left |
| container, i.e., shifted left 15 bits. |
| ENUM |
| BFD_RELOC_D10V_18 |
| ENUMDOC |
| This is an 18-bit reloc with the right 2 bits assumed to be 0. |
| ENUM |
| BFD_RELOC_D10V_18_PCREL |
| ENUMDOC |
| This is an 18-bit reloc with the right 2 bits assumed to be 0. |
| |
| ENUM |
| BFD_RELOC_D30V_6 |
| ENUMDOC |
| Mitsubishi D30V relocs. |
| This is a 6-bit absolute reloc. |
| ENUM |
| BFD_RELOC_D30V_9_PCREL |
| ENUMDOC |
| This is a 6-bit pc-relative reloc with the right 3 bits assumed to |
| be 0. |
| ENUM |
| BFD_RELOC_D30V_9_PCREL_R |
| ENUMDOC |
| This is a 6-bit pc-relative reloc with the right 3 bits assumed to |
| be 0. Same as the previous reloc but on the right side of the |
| container. |
| ENUM |
| BFD_RELOC_D30V_15 |
| ENUMDOC |
| This is a 12-bit absolute reloc with the right 3 bitsassumed to |
| be 0. |
| ENUM |
| BFD_RELOC_D30V_15_PCREL |
| ENUMDOC |
| This is a 12-bit pc-relative reloc with the right 3 bits assumed to |
| be 0. |
| ENUM |
| BFD_RELOC_D30V_15_PCREL_R |
| ENUMDOC |
| This is a 12-bit pc-relative reloc with the right 3 bits assumed to |
| be 0. Same as the previous reloc but on the right side of the |
| container. |
| ENUM |
| BFD_RELOC_D30V_21 |
| ENUMDOC |
| This is an 18-bit absolute reloc with the right 3 bits assumed to |
| be 0. |
| ENUM |
| BFD_RELOC_D30V_21_PCREL |
| ENUMDOC |
| This is an 18-bit pc-relative reloc with the right 3 bits assumed to |
| be 0. |
| ENUM |
| BFD_RELOC_D30V_21_PCREL_R |
| ENUMDOC |
| This is an 18-bit pc-relative reloc with the right 3 bits assumed to |
| be 0. Same as the previous reloc but on the right side of the |
| container. |
| ENUM |
| BFD_RELOC_D30V_32 |
| ENUMDOC |
| This is a 32-bit absolute reloc. |
| ENUM |
| BFD_RELOC_D30V_32_PCREL |
| ENUMDOC |
| This is a 32-bit pc-relative reloc. |
| |
| ENUM |
| BFD_RELOC_DLX_HI16_S |
| ENUMX |
| BFD_RELOC_DLX_LO16 |
| ENUMX |
| BFD_RELOC_DLX_JMP26 |
| ENUMDOC |
| DLX relocs. |
| |
| ENUM |
| BFD_RELOC_M32C_HI8 |
| ENUMX |
| BFD_RELOC_M32C_RL_JUMP |
| ENUMX |
| BFD_RELOC_M32C_RL_1ADDR |
| ENUMX |
| BFD_RELOC_M32C_RL_2ADDR |
| ENUMDOC |
| Renesas M16C/M32C Relocations. |
| |
| ENUM |
| BFD_RELOC_M32R_24 |
| ENUMDOC |
| Renesas M32R (formerly Mitsubishi M32R) relocs. |
| This is a 24 bit absolute address. |
| ENUM |
| BFD_RELOC_M32R_10_PCREL |
| ENUMDOC |
| This is a 10-bit pc-relative reloc with the right 2 bits assumed to |
| be 0. |
| ENUM |
| BFD_RELOC_M32R_18_PCREL |
| ENUMDOC |
| This is an 18-bit reloc with the right 2 bits assumed to be 0. |
| ENUM |
| BFD_RELOC_M32R_26_PCREL |
| ENUMDOC |
| This is a 26-bit reloc with the right 2 bits assumed to be 0. |
| ENUM |
| BFD_RELOC_M32R_HI16_ULO |
| ENUMDOC |
| This is a 16-bit reloc containing the high 16 bits of an address |
| used when the lower 16 bits are treated as unsigned. |
| ENUM |
| BFD_RELOC_M32R_HI16_SLO |
| ENUMDOC |
| This is a 16-bit reloc containing the high 16 bits of an address |
| used when the lower 16 bits are treated as signed. |
| ENUM |
| BFD_RELOC_M32R_LO16 |
| ENUMDOC |
| This is a 16-bit reloc containing the lower 16 bits of an address. |
| ENUM |
| BFD_RELOC_M32R_SDA16 |
| ENUMDOC |
| This is a 16-bit reloc containing the small data area offset for use |
| in add3, load, and store instructions. |
| ENUM |
| BFD_RELOC_M32R_GOT24 |
| ENUMX |
| BFD_RELOC_M32R_26_PLTREL |
| ENUMX |
| BFD_RELOC_M32R_COPY |
| ENUMX |
| BFD_RELOC_M32R_GLOB_DAT |
| ENUMX |
| BFD_RELOC_M32R_JMP_SLOT |
| ENUMX |
| BFD_RELOC_M32R_RELATIVE |
| ENUMX |
| BFD_RELOC_M32R_GOTOFF |
| ENUMX |
| BFD_RELOC_M32R_GOTOFF_HI_ULO |
| ENUMX |
| BFD_RELOC_M32R_GOTOFF_HI_SLO |
| ENUMX |
| BFD_RELOC_M32R_GOTOFF_LO |
| ENUMX |
| BFD_RELOC_M32R_GOTPC24 |
| ENUMX |
| BFD_RELOC_M32R_GOT16_HI_ULO |
| ENUMX |
| BFD_RELOC_M32R_GOT16_HI_SLO |
| ENUMX |
| BFD_RELOC_M32R_GOT16_LO |
| ENUMX |
| BFD_RELOC_M32R_GOTPC_HI_ULO |
| ENUMX |
| BFD_RELOC_M32R_GOTPC_HI_SLO |
| ENUMX |
| BFD_RELOC_M32R_GOTPC_LO |
| ENUMDOC |
| For PIC. |
| |
| |
| ENUM |
| BFD_RELOC_NDS32_20 |
| ENUMDOC |
| NDS32 relocs. |
| This is a 20 bit absolute address. |
| ENUM |
| BFD_RELOC_NDS32_9_PCREL |
| ENUMDOC |
| This is a 9-bit pc-relative reloc with the right 1 bit assumed to |
| be 0. |
| ENUM |
| BFD_RELOC_NDS32_WORD_9_PCREL |
| ENUMDOC |
| This is a 9-bit pc-relative reloc with the right 1 bit assumed to |
| be 0. |
| ENUM |
| BFD_RELOC_NDS32_15_PCREL |
| ENUMDOC |
| This is an 15-bit reloc with the right 1 bit assumed to be 0. |
| ENUM |
| BFD_RELOC_NDS32_17_PCREL |
| ENUMDOC |
| This is an 17-bit reloc with the right 1 bit assumed to be 0. |
| ENUM |
| BFD_RELOC_NDS32_25_PCREL |
| ENUMDOC |
| This is a 25-bit reloc with the right 1 bit assumed to be 0. |
| ENUM |
| BFD_RELOC_NDS32_HI20 |
| ENUMDOC |
| This is a 20-bit reloc containing the high 20 bits of an address |
| used with the lower 12 bits. |
| ENUM |
| BFD_RELOC_NDS32_LO12S3 |
| ENUMDOC |
| This is a 12-bit reloc containing the lower 12 bits of an address |
| then shift right by 3. This is used with ldi,sdi. |
| ENUM |
| BFD_RELOC_NDS32_LO12S2 |
| ENUMDOC |
| This is a 12-bit reloc containing the lower 12 bits of an address |
| then shift left by 2. This is used with lwi,swi. |
| ENUM |
| BFD_RELOC_NDS32_LO12S1 |
| ENUMDOC |
| This is a 12-bit reloc containing the lower 12 bits of an address |
| then shift left by 1. This is used with lhi,shi. |
| ENUM |
| BFD_RELOC_NDS32_LO12S0 |
| ENUMDOC |
| This is a 12-bit reloc containing the lower 12 bits of an address |
| then shift left by 0. This is used with lbisbi. |
| ENUM |
| BFD_RELOC_NDS32_LO12S0_ORI |
| ENUMDOC |
| This is a 12-bit reloc containing the lower 12 bits of an address |
| then shift left by 0. This is only used with branch relaxations. |
| ENUM |
| BFD_RELOC_NDS32_SDA15S3 |
| ENUMDOC |
| This is a 15-bit reloc containing the small data area 18-bit signed |
| offset and shift left by 3 for use in ldi, sdi. |
| ENUM |
| BFD_RELOC_NDS32_SDA15S2 |
| ENUMDOC |
| This is a 15-bit reloc containing the small data area 17-bit signed |
| offset and shift left by 2 for use in lwi, swi. |
| ENUM |
| BFD_RELOC_NDS32_SDA15S1 |
| ENUMDOC |
| This is a 15-bit reloc containing the small data area 16-bit signed |
| offset and shift left by 1 for use in lhi, shi. |
| ENUM |
| BFD_RELOC_NDS32_SDA15S0 |
| ENUMDOC |
| This is a 15-bit reloc containing the small data area 15-bit signed |
| offset and shift left by 0 for use in lbi, sbi. |
| ENUM |
| BFD_RELOC_NDS32_SDA16S3 |
| ENUMDOC |
| This is a 16-bit reloc containing the small data area 16-bit signed |
| offset and shift left by 3. |
| ENUM |
| BFD_RELOC_NDS32_SDA17S2 |
| ENUMDOC |
| This is a 17-bit reloc containing the small data area 17-bit signed |
| offset and shift left by 2 for use in lwi.gp, swi.gp. |
| ENUM |
| BFD_RELOC_NDS32_SDA18S1 |
| ENUMDOC |
| This is a 18-bit reloc containing the small data area 18-bit signed |
| offset and shift left by 1 for use in lhi.gp, shi.gp. |
| ENUM |
| BFD_RELOC_NDS32_SDA19S0 |
| ENUMDOC |
| This is a 19-bit reloc containing the small data area 19-bit signed |
| offset and shift left by 0 for use in lbi.gp, sbi.gp. |
| ENUM |
| BFD_RELOC_NDS32_GOT20 |
| ENUMX |
| BFD_RELOC_NDS32_9_PLTREL |
| ENUMX |
| BFD_RELOC_NDS32_25_PLTREL |
| ENUMX |
| BFD_RELOC_NDS32_COPY |
| ENUMX |
| BFD_RELOC_NDS32_GLOB_DAT |
| ENUMX |
| BFD_RELOC_NDS32_JMP_SLOT |
| ENUMX |
| BFD_RELOC_NDS32_RELATIVE |
| ENUMX |
| BFD_RELOC_NDS32_GOTOFF |
| ENUMX |
| BFD_RELOC_NDS32_GOTOFF_HI20 |
| ENUMX |
| BFD_RELOC_NDS32_GOTOFF_LO12 |
| ENUMX |
| BFD_RELOC_NDS32_GOTPC20 |
| ENUMX |
| BFD_RELOC_NDS32_GOT_HI20 |
| ENUMX |
| BFD_RELOC_NDS32_GOT_LO12 |
| ENUMX |
| BFD_RELOC_NDS32_GOTPC_HI20 |
| ENUMX |
| BFD_RELOC_NDS32_GOTPC_LO12 |
| ENUMDOC |
| For PIC. |
| ENUM |
| BFD_RELOC_NDS32_INSN16 |
| ENUMX |
| BFD_RELOC_NDS32_LABEL |
| ENUMX |
| BFD_RELOC_NDS32_LONGCALL1 |
| ENUMX |
| BFD_RELOC_NDS32_LONGCALL2 |
| ENUMX |
| BFD_RELOC_NDS32_LONGCALL3 |
| ENUMX |
| BFD_RELOC_NDS32_LONGJUMP1 |
| ENUMX |
| BFD_RELOC_NDS32_LONGJUMP2 |
| ENUMX |
| BFD_RELOC_NDS32_LONGJUMP3 |
| ENUMX |
| BFD_RELOC_NDS32_LOADSTORE |
| ENUMX |
| BFD_RELOC_NDS32_9_FIXED |
| ENUMX |
| BFD_RELOC_NDS32_15_FIXED |
| ENUMX |
| BFD_RELOC_NDS32_17_FIXED |
| ENUMX |
| BFD_RELOC_NDS32_25_FIXED |
| ENUMX |
| BFD_RELOC_NDS32_LONGCALL4 |
| ENUMX |
| BFD_RELOC_NDS32_LONGCALL5 |
| ENUMX |
| BFD_RELOC_NDS32_LONGCALL6 |
| ENUMX |
| BFD_RELOC_NDS32_LONGJUMP4 |
| ENUMX |
| BFD_RELOC_NDS32_LONGJUMP5 |
| ENUMX |
| BFD_RELOC_NDS32_LONGJUMP6 |
| ENUMX |
| BFD_RELOC_NDS32_LONGJUMP7 |
| ENUMDOC |
| For relax. |
| ENUM |
| BFD_RELOC_NDS32_PLTREL_HI20 |
| ENUMX |
| BFD_RELOC_NDS32_PLTREL_LO12 |
| ENUMX |
| BFD_RELOC_NDS32_PLT_GOTREL_HI20 |
| ENUMX |
| BFD_RELOC_NDS32_PLT_GOTREL_LO12 |
| ENUMDOC |
| For PIC. |
| ENUM |
| BFD_RELOC_NDS32_SDA12S2_DP |
| ENUMX |
| BFD_RELOC_NDS32_SDA12S2_SP |
| ENUMX |
| BFD_RELOC_NDS32_LO12S2_DP |
| ENUMX |
| BFD_RELOC_NDS32_LO12S2_SP |
| ENUMDOC |
| For floating point. |
| ENUM |
| BFD_RELOC_NDS32_DWARF2_OP1 |
| ENUMX |
| BFD_RELOC_NDS32_DWARF2_OP2 |
| ENUMX |
| BFD_RELOC_NDS32_DWARF2_LEB |
| ENUMDOC |
| For dwarf2 debug_line. |
| ENUM |
| BFD_RELOC_NDS32_UPDATE_TA |
| ENUMDOC |
| For eliminating 16-bit instructions. |
| ENUM |
| BFD_RELOC_NDS32_PLT_GOTREL_LO20 |
| ENUMX |
| BFD_RELOC_NDS32_PLT_GOTREL_LO15 |
| ENUMX |
| BFD_RELOC_NDS32_PLT_GOTREL_LO19 |
| ENUMX |
| BFD_RELOC_NDS32_GOT_LO15 |
| ENUMX |
| BFD_RELOC_NDS32_GOT_LO19 |
| ENUMX |
| BFD_RELOC_NDS32_GOTOFF_LO15 |
| ENUMX |
| BFD_RELOC_NDS32_GOTOFF_LO19 |
| ENUMX |
| BFD_RELOC_NDS32_GOT15S2 |
| ENUMX |
| BFD_RELOC_NDS32_GOT17S2 |
| ENUMDOC |
| For PIC object relaxation. |
| ENUM |
| BFD_RELOC_NDS32_5 |
| ENUMDOC |
| NDS32 relocs. |
| This is a 5 bit absolute address. |
| ENUM |
| BFD_RELOC_NDS32_10_UPCREL |
| ENUMDOC |
| This is a 10-bit unsigned pc-relative reloc with the right 1 bit |
| assumed to be 0. |
| ENUM |
| BFD_RELOC_NDS32_SDA_FP7U2_RELA |
| ENUMDOC |
| If fp were omitted, fp can used as another gp. |
| ENUM |
| BFD_RELOC_NDS32_RELAX_ENTRY |
| ENUMX |
| BFD_RELOC_NDS32_GOT_SUFF |
| ENUMX |
| BFD_RELOC_NDS32_GOTOFF_SUFF |
| ENUMX |
| BFD_RELOC_NDS32_PLT_GOT_SUFF |
| ENUMX |
| BFD_RELOC_NDS32_MULCALL_SUFF |
| ENUMX |
| BFD_RELOC_NDS32_PTR |
| ENUMX |
| BFD_RELOC_NDS32_PTR_COUNT |
| ENUMX |
| BFD_RELOC_NDS32_PTR_RESOLVED |
| ENUMX |
| BFD_RELOC_NDS32_PLTBLOCK |
| ENUMX |
| BFD_RELOC_NDS32_RELAX_REGION_BEGIN |
| ENUMX |
| BFD_RELOC_NDS32_RELAX_REGION_END |
| ENUMX |
| BFD_RELOC_NDS32_MINUEND |
| ENUMX |
| BFD_RELOC_NDS32_SUBTRAHEND |
| ENUMX |
| BFD_RELOC_NDS32_DIFF8 |
| ENUMX |
| BFD_RELOC_NDS32_DIFF16 |
| ENUMX |
| BFD_RELOC_NDS32_DIFF32 |
| ENUMX |
| BFD_RELOC_NDS32_DIFF_ULEB128 |
| ENUMX |
| BFD_RELOC_NDS32_EMPTY |
| ENUMDOC |
| Relaxation relative relocation types. |
| ENUM |
| BFD_RELOC_NDS32_25_ABS |
| ENUMDOC |
| This is a 25 bit absolute address. |
| ENUM |
| BFD_RELOC_NDS32_DATA |
| ENUMX |
| BFD_RELOC_NDS32_TRAN |
| ENUMX |
| BFD_RELOC_NDS32_17IFC_PCREL |
| ENUMX |
| BFD_RELOC_NDS32_10IFCU_PCREL |
| ENUMDOC |
| For ex9 and ifc using. |
| ENUM |
| BFD_RELOC_NDS32_TPOFF |
| ENUMX |
| BFD_RELOC_NDS32_GOTTPOFF |
| ENUMX |
| BFD_RELOC_NDS32_TLS_LE_HI20 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_LE_LO12 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_LE_20 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_LE_15S0 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_LE_15S1 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_LE_15S2 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_LE_ADD |
| ENUMX |
| BFD_RELOC_NDS32_TLS_LE_LS |
| ENUMX |
| BFD_RELOC_NDS32_TLS_IE_HI20 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_IE_LO12 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_IE_LO12S2 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_IEGP_HI20 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_IEGP_LO12 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_IEGP_LO12S2 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_IEGP_LW |
| ENUMX |
| BFD_RELOC_NDS32_TLS_DESC |
| ENUMX |
| BFD_RELOC_NDS32_TLS_DESC_HI20 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_DESC_LO12 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_DESC_20 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_DESC_SDA17S2 |
| ENUMX |
| BFD_RELOC_NDS32_TLS_DESC_ADD |
| ENUMX |
| BFD_RELOC_NDS32_TLS_DESC_FUNC |
| ENUMX |
| BFD_RELOC_NDS32_TLS_DESC_CALL |
| ENUMX |
| BFD_RELOC_NDS32_TLS_DESC_MEM |
| ENUMX |
| BFD_RELOC_NDS32_REMOVE |
| ENUMX |
| BFD_RELOC_NDS32_GROUP |
| ENUMDOC |
| For TLS. |
| ENUM |
| BFD_RELOC_NDS32_LSI |
| ENUMDOC |
| For floating load store relaxation. |
| |
| |
| ENUM |
| BFD_RELOC_V850_9_PCREL |
| ENUMDOC |
| This is a 9-bit reloc. |
| ENUM |
| BFD_RELOC_V850_22_PCREL |
| ENUMDOC |
| This is a 22-bit reloc. |
| |
| ENUM |
| BFD_RELOC_V850_SDA_16_16_OFFSET |
| ENUMDOC |
| This is a 16 bit offset from the short data area pointer. |
| ENUM |
| BFD_RELOC_V850_SDA_15_16_OFFSET |
| ENUMDOC |
| This is a 16 bit offset (of which only 15 bits are used) from the |
| short data area pointer. |
| ENUM |
| BFD_RELOC_V850_ZDA_16_16_OFFSET |
| ENUMDOC |
| This is a 16 bit offset from the zero data area pointer. |
| ENUM |
| BFD_RELOC_V850_ZDA_15_16_OFFSET |
| ENUMDOC |
| This is a 16 bit offset (of which only 15 bits are used) from the |
| zero data area pointer. |
| ENUM |
| BFD_RELOC_V850_TDA_6_8_OFFSET |
| ENUMDOC |
| This is an 8 bit offset (of which only 6 bits are used) from the |
| tiny data area pointer. |
| ENUM |
| BFD_RELOC_V850_TDA_7_8_OFFSET |
| ENUMDOC |
| This is an 8bit offset (of which only 7 bits are used) from the tiny |
| data area pointer. |
| ENUM |
| BFD_RELOC_V850_TDA_7_7_OFFSET |
| ENUMDOC |
| This is a 7 bit offset from the tiny data area pointer. |
| ENUM |
| BFD_RELOC_V850_TDA_16_16_OFFSET |
| ENUMDOC |
| This is a 16 bit offset from the tiny data area pointer. |
| ENUM |
| BFD_RELOC_V850_TDA_4_5_OFFSET |
| ENUMDOC |
| This is a 5 bit offset (of which only 4 bits are used) from the tiny |
| data area pointer. |
| ENUM |
| BFD_RELOC_V850_TDA_4_4_OFFSET |
| ENUMDOC |
| This is a 4 bit offset from the tiny data area pointer. |
| ENUM |
| BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET |
| ENUMDOC |
| This is a 16 bit offset from the short data area pointer, with the |
| bits placed non-contiguously in the instruction. |
| ENUM |
| BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET |
| ENUMDOC |
| This is a 16 bit offset from the zero data area pointer, with the |
| bits placed non-contiguously in the instruction. |
| ENUM |
| BFD_RELOC_V850_CALLT_6_7_OFFSET |
| ENUMDOC |
| This is a 6 bit offset from the call table base pointer. |
| ENUM |
| BFD_RELOC_V850_CALLT_16_16_OFFSET |
| ENUMDOC |
| This is a 16 bit offset from the call table base pointer. |
| ENUM |
| BFD_RELOC_V850_LONGCALL |
| ENUMDOC |
| Used for relaxing indirect function calls. |
| ENUM |
| BFD_RELOC_V850_LONGJUMP |
| ENUMDOC |
| Used for relaxing indirect jumps. |
| ENUM |
| BFD_RELOC_V850_ALIGN |
| ENUMDOC |
| Used to maintain alignment whilst relaxing. |
| ENUM |
| BFD_RELOC_V850_LO16_SPLIT_OFFSET |
| ENUMDOC |
| This is a variation of BFD_RELOC_LO16 that can be used in v850e |
| ld.bu instructions. |
| ENUM |
| BFD_RELOC_V850_16_PCREL |
| ENUMDOC |
| This is a 16-bit reloc. |
| ENUM |
| BFD_RELOC_V850_17_PCREL |
| ENUMDOC |
| This is a 17-bit reloc. |
| ENUM |
| BFD_RELOC_V850_23 |
| ENUMDOC |
| This is a 23-bit reloc. |
| ENUM |
| BFD_RELOC_V850_32_PCREL |
| ENUMDOC |
| This is a 32-bit reloc. |
| ENUM |
| BFD_RELOC_V850_32_ABS |
| ENUMDOC |
| This is a 32-bit reloc. |
| ENUM |
| BFD_RELOC_V850_16_SPLIT_OFFSET |
| ENUMDOC |
| This is a 16-bit reloc. |
| ENUM |
| BFD_RELOC_V850_16_S1 |
| ENUMDOC |
| This is a 16-bit reloc. |
| ENUM |
| BFD_RELOC_V850_LO16_S1 |
| ENUMDOC |
| Low 16 bits. 16 bit shifted by 1. |
| ENUM |
| BFD_RELOC_V850_CALLT_15_16_OFFSET |
| ENUMDOC |
| This is a 16 bit offset from the call table base pointer. |
| ENUM |
| BFD_RELOC_V850_32_GOTPCREL |
| ENUMX |
| BFD_RELOC_V850_16_GOT |
| ENUMX |
| BFD_RELOC_V850_32_GOT |
| ENUMX |
| BFD_RELOC_V850_22_PLT_PCREL |
| ENUMX |
| BFD_RELOC_V850_32_PLT_PCREL |
| ENUMX |
| BFD_RELOC_V850_COPY |
| ENUMX |
| BFD_RELOC_V850_GLOB_DAT |
| ENUMX |
| BFD_RELOC_V850_JMP_SLOT |
| ENUMX |
| BFD_RELOC_V850_RELATIVE |
| ENUMX |
| BFD_RELOC_V850_16_GOTOFF |
| ENUMX |
| BFD_RELOC_V850_32_GOTOFF |
| ENUMDOC |
| DSO relocations. |
| ENUM |
| BFD_RELOC_V850_CODE |
| ENUMDOC |
| Start code. |
| ENUM |
| BFD_RELOC_V850_DATA |
| ENUMDOC |
| Start data in text. |
| |
| ENUM |
| BFD_RELOC_TIC30_LDP |
| ENUMDOC |
| This is a 8bit DP reloc for the tms320c30, where the most |
| significant 8 bits of a 24 bit word are placed into the least |
| significant 8 bits of the opcode. |
| |
| ENUM |
| BFD_RELOC_TIC54X_PARTLS7 |
| ENUMDOC |
| This is a 7bit reloc for the tms320c54x, where the least |
| significant 7 bits of a 16 bit word are placed into the least |
| significant 7 bits of the opcode. |
| |
| ENUM |
| BFD_RELOC_TIC54X_PARTMS9 |
| ENUMDOC |
| This is a 9bit DP reloc for the tms320c54x, where the most |
| significant 9 bits of a 16 bit word are placed into the least |
| significant 9 bits of the opcode. |
| |
| ENUM |
| BFD_RELOC_TIC54X_23 |
| ENUMDOC |
| This is an extended address 23-bit reloc for the tms320c54x. |
| |
| ENUM |
| BFD_RELOC_TIC54X_16_OF_23 |
| ENUMDOC |
| This is a 16-bit reloc for the tms320c54x, where the least |
| significant 16 bits of a 23-bit extended address are placed into |
| the opcode. |
| |
| ENUM |
| BFD_RELOC_TIC54X_MS7_OF_23 |
| ENUMDOC |
| This is a reloc for the tms320c54x, where the most |
| significant 7 bits of a 23-bit extended address are placed into |
| the opcode. |
| |
| ENUM |
| BFD_RELOC_C6000_PCR_S21 |
| ENUMX |
| BFD_RELOC_C6000_PCR_S12 |
| ENUMX |
| BFD_RELOC_C6000_PCR_S10 |
| ENUMX |
| BFD_RELOC_C6000_PCR_S7 |
| ENUMX |
| BFD_RELOC_C6000_ABS_S16 |
| ENUMX |
| BFD_RELOC_C6000_ABS_L16 |
| ENUMX |
| BFD_RELOC_C6000_ABS_H16 |
| ENUMX |
| BFD_RELOC_C6000_SBR_U15_B |
| ENUMX |
| BFD_RELOC_C6000_SBR_U15_H |
| ENUMX |
| BFD_RELOC_C6000_SBR_U15_W |
| ENUMX |
| BFD_RELOC_C6000_SBR_S16 |
| ENUMX |
| BFD_RELOC_C6000_SBR_L16_B |
| ENUMX |
| BFD_RELOC_C6000_SBR_L16_H |
| ENUMX |
| BFD_RELOC_C6000_SBR_L16_W |
| ENUMX |
| BFD_RELOC_C6000_SBR_H16_B |
| ENUMX |
| BFD_RELOC_C6000_SBR_H16_H |
| ENUMX |
| BFD_RELOC_C6000_SBR_H16_W |
| ENUMX |
| BFD_RELOC_C6000_SBR_GOT_U15_W |
| ENUMX |
| BFD_RELOC_C6000_SBR_GOT_L16_W |
| ENUMX |
| BFD_RELOC_C6000_SBR_GOT_H16_W |
| ENUMX |
| BFD_RELOC_C6000_DSBT_INDEX |
| ENUMX |
| BFD_RELOC_C6000_PREL31 |
| ENUMX |
| BFD_RELOC_C6000_COPY |
| ENUMX |
| BFD_RELOC_C6000_JUMP_SLOT |
| ENUMX |
| BFD_RELOC_C6000_EHTYPE |
| ENUMX |
| BFD_RELOC_C6000_PCR_H16 |
| ENUMX |
| BFD_RELOC_C6000_PCR_L16 |
| ENUMX |
| BFD_RELOC_C6000_ALIGN |
| ENUMX |
| BFD_RELOC_C6000_FPHEAD |
| ENUMX |
| BFD_RELOC_C6000_NOCMP |
| ENUMDOC |
| TMS320C6000 relocations. |
| |
| ENUM |
| BFD_RELOC_FR30_48 |
| ENUMDOC |
| This is a 48 bit reloc for the FR30 that stores 32 bits. |
| ENUM |
| BFD_RELOC_FR30_20 |
| ENUMDOC |
| This is a 32 bit reloc for the FR30 that stores 20 bits split up |
| into two sections. |
| ENUM |
| BFD_RELOC_FR30_6_IN_4 |
| ENUMDOC |
| This is a 16 bit reloc for the FR30 that stores a 6 bit word offset |
| in 4 bits. |
| ENUM |
| BFD_RELOC_FR30_8_IN_8 |
| ENUMDOC |
| This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset |
| into 8 bits. |
| ENUM |
| BFD_RELOC_FR30_9_IN_8 |
| ENUMDOC |
| This is a 16 bit reloc for the FR30 that stores a 9 bit short offset |
| into 8 bits. |
| ENUM |
| BFD_RELOC_FR30_10_IN_8 |
| ENUMDOC |
| This is a 16 bit reloc for the FR30 that stores a 10 bit word offset |
| into 8 bits. |
| ENUM |
| BFD_RELOC_FR30_9_PCREL |
| ENUMDOC |
| This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative |
| short offset into 8 bits. |
| ENUM |
| BFD_RELOC_FR30_12_PCREL |
| ENUMDOC |
| This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative |
| short offset into 11 bits. |
| |
| ENUM |
| BFD_RELOC_MCORE_PCREL_IMM8BY4 |
| ENUMX |
| BFD_RELOC_MCORE_PCREL_IMM11BY2 |
| ENUMX |
| BFD_RELOC_MCORE_PCREL_IMM4BY2 |
| ENUMX |
| BFD_RELOC_MCORE_PCREL_32 |
| ENUMX |
| BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2 |
| ENUMX |
| BFD_RELOC_MCORE_RVA |
| ENUMDOC |
| Motorola Mcore relocations. |
| |
| ENUM |
| BFD_RELOC_MEP_8 |
| ENUMX |
| BFD_RELOC_MEP_16 |
| ENUMX |
| BFD_RELOC_MEP_32 |
| ENUMX |
| BFD_RELOC_MEP_PCREL8A2 |
| ENUMX |
| BFD_RELOC_MEP_PCREL12A2 |
| ENUMX |
| BFD_RELOC_MEP_PCREL17A2 |
| ENUMX |
| BFD_RELOC_MEP_PCREL24A2 |
| ENUMX |
| BFD_RELOC_MEP_PCABS24A2 |
| ENUMX |
| BFD_RELOC_MEP_LOW16 |
| ENUMX |
| BFD_RELOC_MEP_HI16U |
| ENUMX |
| BFD_RELOC_MEP_HI16S |
| ENUMX |
| BFD_RELOC_MEP_GPREL |
| ENUMX |
| BFD_RELOC_MEP_TPREL |
| ENUMX |
| BFD_RELOC_MEP_TPREL7 |
| ENUMX |
| BFD_RELOC_MEP_TPREL7A2 |
| ENUMX |
| BFD_RELOC_MEP_TPREL7A4 |
| ENUMX |
| BFD_RELOC_MEP_UIMM24 |
| ENUMX |
| BFD_RELOC_MEP_ADDR24A4 |
| ENUMX |
| BFD_RELOC_MEP_GNU_VTINHERIT |
| ENUMX |
| BFD_RELOC_MEP_GNU_VTENTRY |
| ENUMDOC |
| Toshiba Media Processor Relocations. |
| |
| ENUM |
| BFD_RELOC_METAG_HIADDR16 |
| ENUMX |
| BFD_RELOC_METAG_LOADDR16 |
| ENUMX |
| BFD_RELOC_METAG_RELBRANCH |
| ENUMX |
| BFD_RELOC_METAG_GETSETOFF |
| ENUMX |
| BFD_RELOC_METAG_HIOG |
| ENUMX |
| BFD_RELOC_METAG_LOOG |
| ENUMX |
| BFD_RELOC_METAG_REL8 |
| ENUMX |
| BFD_RELOC_METAG_REL16 |
| ENUMX |
| BFD_RELOC_METAG_HI16_GOTOFF |
| ENUMX |
| BFD_RELOC_METAG_LO16_GOTOFF |
| ENUMX |
| BFD_RELOC_METAG_GETSET_GOTOFF |
| ENUMX |
| BFD_RELOC_METAG_GETSET_GOT |
| ENUMX |
| BFD_RELOC_METAG_HI16_GOTPC |
| ENUMX |
| BFD_RELOC_METAG_LO16_GOTPC |
| ENUMX |
| BFD_RELOC_METAG_HI16_PLT |
| ENUMX |
| BFD_RELOC_METAG_LO16_PLT |
| ENUMX |
| BFD_RELOC_METAG_RELBRANCH_PLT |
| ENUMX |
| BFD_RELOC_METAG_GOTOFF |
| ENUMX |
| BFD_RELOC_METAG_PLT |
| ENUMX |
| BFD_RELOC_METAG_COPY |
| ENUMX |
| BFD_RELOC_METAG_JMP_SLOT |
| ENUMX |
| BFD_RELOC_METAG_RELATIVE |
| ENUMX |
| BFD_RELOC_METAG_GLOB_DAT |
| ENUMX |
| BFD_RELOC_METAG_TLS_GD |
| ENUMX |
| BFD_RELOC_METAG_TLS_LDM |
| ENUMX |
| BFD_RELOC_METAG_TLS_LDO_HI16 |
| ENUMX |
| BFD_RELOC_METAG_TLS_LDO_LO16 |
| ENUMX |
| BFD_RELOC_METAG_TLS_LDO |
| ENUMX |
| BFD_RELOC_METAG_TLS_IE |
| ENUMX |
| BFD_RELOC_METAG_TLS_IENONPIC |
| ENUMX |
| BFD_RELOC_METAG_TLS_IENONPIC_HI16 |
| ENUMX |
| BFD_RELOC_METAG_TLS_IENONPIC_LO16 |
| ENUMX |
| BFD_RELOC_METAG_TLS_TPOFF |
| ENUMX |
| BFD_RELOC_METAG_TLS_DTPMOD |
| ENUMX |
| BFD_RELOC_METAG_TLS_DTPOFF |
| ENUMX |
| BFD_RELOC_METAG_TLS_LE |
| ENUMX |
| BFD_RELOC_METAG_TLS_LE_HI16 |
| ENUMX |
| BFD_RELOC_METAG_TLS_LE_LO16 |
| ENUMDOC |
| Imagination Technologies Meta relocations. |
| |
| ENUM |
| BFD_RELOC_MMIX_GETA |
| ENUMX |
| BFD_RELOC_MMIX_GETA_1 |
| ENUMX |
| BFD_RELOC_MMIX_GETA_2 |
| ENUMX |
| BFD_RELOC_MMIX_GETA_3 |
| ENUMDOC |
| These are relocations for the GETA instruction. |
| ENUM |
| BFD_RELOC_MMIX_CBRANCH |
| ENUMX |
| BFD_RELOC_MMIX_CBRANCH_J |
| ENUMX |
| BFD_RELOC_MMIX_CBRANCH_1 |
| ENUMX |
| BFD_RELOC_MMIX_CBRANCH_2 |
| ENUMX |
| BFD_RELOC_MMIX_CBRANCH_3 |
| ENUMDOC |
| These are relocations for a conditional branch instruction. |
| ENUM |
| BFD_RELOC_MMIX_PUSHJ |
| ENUMX |
| BFD_RELOC_MMIX_PUSHJ_1 |
| ENUMX |
| BFD_RELOC_MMIX_PUSHJ_2 |
| ENUMX |
| BFD_RELOC_MMIX_PUSHJ_3 |
| ENUMX |
| BFD_RELOC_MMIX_PUSHJ_STUBBABLE |
| ENUMDOC |
| These are relocations for the PUSHJ instruction. |
| ENUM |
| BFD_RELOC_MMIX_JMP |
| ENUMX |
| BFD_RELOC_MMIX_JMP_1 |
| ENUMX |
| BFD_RELOC_MMIX_JMP_2 |
| ENUMX |
| BFD_RELOC_MMIX_JMP_3 |
| ENUMDOC |
| These are relocations for the JMP instruction. |
| ENUM |
| BFD_RELOC_MMIX_ADDR19 |
| ENUMDOC |
| This is a relocation for a relative address as in a GETA instruction |
| or a branch. |
| ENUM |
| BFD_RELOC_MMIX_ADDR27 |
| ENUMDOC |
| This is a relocation for a relative address as in a JMP instruction. |
| ENUM |
| BFD_RELOC_MMIX_REG_OR_BYTE |
| ENUMDOC |
| This is a relocation for an instruction field that may be a general |
| register or a value 0..255. |
| ENUM |
| BFD_RELOC_MMIX_REG |
| ENUMDOC |
| This is a relocation for an instruction field that may be a general |
| register. |
| ENUM |
| BFD_RELOC_MMIX_BASE_PLUS_OFFSET |
| ENUMDOC |
| This is a relocation for two instruction fields holding a register |
| and an offset, the equivalent of the relocation. |
| ENUM |
| BFD_RELOC_MMIX_LOCAL |
| ENUMDOC |
| This relocation is an assertion that the expression is not allocated |
| as a global register. It does not modify contents. |
| |
| ENUM |
| BFD_RELOC_AVR_7_PCREL |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit pc relative |
| short offset into 7 bits. |
| ENUM |
| BFD_RELOC_AVR_13_PCREL |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 13 bit pc relative |
| short offset into 12 bits. |
| ENUM |
| BFD_RELOC_AVR_16_PM |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 17 bit value (usually |
| program memory address) into 16 bits. |
| ENUM |
| BFD_RELOC_AVR_LO8_LDI |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit value (usually |
| data memory address) into 8 bit immediate value of LDI insn. |
| ENUM |
| BFD_RELOC_AVR_HI8_LDI |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit |
| of data memory address) into 8 bit immediate value of LDI insn. |
| ENUM |
| BFD_RELOC_AVR_HH8_LDI |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit value (most |
| high 8 bit of program memory address) into 8 bit immediate value of |
| LDI insn. |
| ENUM |
| BFD_RELOC_AVR_MS8_LDI |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit value (most |
| high 8 bit of 32 bit value) into 8 bit immediate value of LDI insn. |
| ENUM |
| BFD_RELOC_AVR_LO8_LDI_NEG |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| (usually data memory address) into 8 bit immediate value of SUBI insn. |
| ENUM |
| BFD_RELOC_AVR_HI8_LDI_NEG |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| (high 8 bit of data memory address) into 8 bit immediate value of |
| SUBI insn. |
| ENUM |
| BFD_RELOC_AVR_HH8_LDI_NEG |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| (most high 8 bit of program memory address) into 8 bit immediate |
| value of LDI or SUBI insn. |
| ENUM |
| BFD_RELOC_AVR_MS8_LDI_NEG |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| (msb of 32 bit value) into 8 bit immediate value of LDI insn. |
| ENUM |
| BFD_RELOC_AVR_LO8_LDI_PM |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit value (usually |
| command address) into 8 bit immediate value of LDI insn. |
| ENUM |
| BFD_RELOC_AVR_LO8_LDI_GS |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit value |
| (command address) into 8 bit immediate value of LDI insn. If the |
| address is beyond the 128k boundary, the linker inserts a jump stub |
| for this reloc in the lower 128k. |
| ENUM |
| BFD_RELOC_AVR_HI8_LDI_PM |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit |
| of command address) into 8 bit immediate value of LDI insn. |
| ENUM |
| BFD_RELOC_AVR_HI8_LDI_GS |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit |
| of command address) into 8 bit immediate value of LDI insn. If the |
| address is beyond the 128k boundary, the linker inserts a jump stub |
| for this reloc below 128k. |
| ENUM |
| BFD_RELOC_AVR_HH8_LDI_PM |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores 8 bit value (most |
| high 8 bit of command address) into 8 bit immediate value of LDI |
| insn. |
| ENUM |
| BFD_RELOC_AVR_LO8_LDI_PM_NEG |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| (usually command address) into 8 bit immediate value of SUBI insn. |
| ENUM |
| BFD_RELOC_AVR_HI8_LDI_PM_NEG |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| (high 8 bit of 16 bit command address) into 8 bit immediate value |
| of SUBI insn. |
| ENUM |
| BFD_RELOC_AVR_HH8_LDI_PM_NEG |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| (high 6 bit of 22 bit command address) into 8 bit immediate |
| value of SUBI insn. |
| ENUM |
| BFD_RELOC_AVR_CALL |
| ENUMDOC |
| This is a 32 bit reloc for the AVR that stores 23 bit value |
| into 22 bits. |
| ENUM |
| BFD_RELOC_AVR_LDI |
| ENUMDOC |
| This is a 16 bit reloc for the AVR that stores all needed bits |
| for absolute addressing with ldi with overflow check to linktime. |
| ENUM |
| BFD_RELOC_AVR_6 |
| ENUMDOC |
| This is a 6 bit reloc for the AVR that stores offset for ldd/std |
| instructions. |
| ENUM |
| BFD_RELOC_AVR_6_ADIW |
| ENUMDOC |
| This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw |
| instructions. |
| ENUM |
| BFD_RELOC_AVR_8_LO |
| ENUMDOC |
| This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol |
| in .byte lo8(symbol). |
| ENUM |
| BFD_RELOC_AVR_8_HI |
| ENUMDOC |
| This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol |
| in .byte hi8(symbol). |
| ENUM |
| BFD_RELOC_AVR_8_HLO |
| ENUMDOC |
| This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol |
| in .byte hlo8(symbol). |
| ENUM |
| BFD_RELOC_AVR_DIFF8 |
| ENUMX |
| BFD_RELOC_AVR_DIFF16 |
| ENUMX |
| BFD_RELOC_AVR_DIFF32 |
| ENUMDOC |
| AVR relocations to mark the difference of two local symbols. |
| These are only needed to support linker relaxation and can be ignored |
| when not relaxing. The field is set to the value of the difference |
| assuming no relaxation. The relocation encodes the position of the |
| second symbol so the linker can determine whether to adjust the field |
| value. |
| ENUM |
| BFD_RELOC_AVR_LDS_STS_16 |
| ENUMDOC |
| This is a 7 bit reloc for the AVR that stores SRAM address for 16bit |
| lds and sts instructions supported only tiny core. |
| ENUM |
| BFD_RELOC_AVR_PORT6 |
| ENUMDOC |
| This is a 6 bit reloc for the AVR that stores an I/O register |
| number for the IN and OUT instructions. |
| ENUM |
| BFD_RELOC_AVR_PORT5 |
| ENUMDOC |
| This is a 5 bit reloc for the AVR that stores an I/O register |
| number for the SBIC, SBIS, SBI and CBI instructions. |
| |
| ENUM |
| BFD_RELOC_RISCV_HI20 |
| ENUMX |
| BFD_RELOC_RISCV_PCREL_HI20 |
| ENUMX |
| BFD_RELOC_RISCV_PCREL_LO12_I |
| ENUMX |
| BFD_RELOC_RISCV_PCREL_LO12_S |
| ENUMX |
| BFD_RELOC_RISCV_LO12_I |
| ENUMX |
| BFD_RELOC_RISCV_LO12_S |
| ENUMX |
| BFD_RELOC_RISCV_GPREL12_I |
| ENUMX |
| BFD_RELOC_RISCV_GPREL12_S |
| ENUMX |
| BFD_RELOC_RISCV_TPREL_HI20 |
| ENUMX |
| BFD_RELOC_RISCV_TPREL_LO12_I |
| ENUMX |
| BFD_RELOC_RISCV_TPREL_LO12_S |
| ENUMX |
| BFD_RELOC_RISCV_TPREL_ADD |
| ENUMX |
| BFD_RELOC_RISCV_CALL |
| ENUMX |
| BFD_RELOC_RISCV_CALL_PLT |
| ENUMX |
| BFD_RELOC_RISCV_ADD8 |
| ENUMX |
| BFD_RELOC_RISCV_ADD16 |
| ENUMX |
| BFD_RELOC_RISCV_ADD32 |
| ENUMX |
| BFD_RELOC_RISCV_ADD64 |
| ENUMX |
| BFD_RELOC_RISCV_SUB8 |
| ENUMX |
| BFD_RELOC_RISCV_SUB16 |
| ENUMX |
| BFD_RELOC_RISCV_SUB32 |
| ENUMX |
| BFD_RELOC_RISCV_SUB64 |
| ENUMX |
| BFD_RELOC_RISCV_GOT_HI20 |
| ENUMX |
| BFD_RELOC_RISCV_TLS_GOT_HI20 |
| ENUMX |
| BFD_RELOC_RISCV_TLS_GD_HI20 |
| ENUMX |
| BFD_RELOC_RISCV_JMP |
| ENUMX |
| BFD_RELOC_RISCV_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_RISCV_TLS_DTPREL32 |
| ENUMX |
| BFD_RELOC_RISCV_TLS_DTPMOD64 |
| ENUMX |
| BFD_RELOC_RISCV_TLS_DTPREL64 |
| ENUMX |
| BFD_RELOC_RISCV_TLS_TPREL32 |
| ENUMX |
| BFD_RELOC_RISCV_TLS_TPREL64 |
| ENUMX |
| BFD_RELOC_RISCV_ALIGN |
| ENUMX |
| BFD_RELOC_RISCV_RVC_BRANCH |
| ENUMX |
| BFD_RELOC_RISCV_RVC_JUMP |
| ENUMX |
| BFD_RELOC_RISCV_RELAX |
| ENUMX |
| BFD_RELOC_RISCV_CFA |
| ENUMX |
| BFD_RELOC_RISCV_SUB6 |
| ENUMX |
| BFD_RELOC_RISCV_SET6 |
| ENUMX |
| BFD_RELOC_RISCV_SET8 |
| ENUMX |
| BFD_RELOC_RISCV_SET16 |
| ENUMX |
| BFD_RELOC_RISCV_SET32 |
| ENUMX |
| BFD_RELOC_RISCV_32_PCREL |
| ENUMX |
| BFD_RELOC_RISCV_SET_ULEB128 |
| ENUMX |
| BFD_RELOC_RISCV_SUB_ULEB128 |
| ENUMDOC |
| RISC-V relocations. |
| |
| ENUM |
| BFD_RELOC_RL78_NEG8 |
| ENUMX |
| BFD_RELOC_RL78_NEG16 |
| ENUMX |
| BFD_RELOC_RL78_NEG24 |
| ENUMX |
| BFD_RELOC_RL78_NEG32 |
| ENUMX |
| BFD_RELOC_RL78_16_OP |
| ENUMX |
| BFD_RELOC_RL78_24_OP |
| ENUMX |
| BFD_RELOC_RL78_32_OP |
| ENUMX |
| BFD_RELOC_RL78_8U |
| ENUMX |
| BFD_RELOC_RL78_16U |
| ENUMX |
| BFD_RELOC_RL78_24U |
| ENUMX |
| BFD_RELOC_RL78_DIR3U_PCREL |
| ENUMX |
| BFD_RELOC_RL78_DIFF |
| ENUMX |
| BFD_RELOC_RL78_GPRELB |
| ENUMX |
| BFD_RELOC_RL78_GPRELW |
| ENUMX |
| BFD_RELOC_RL78_GPRELL |
| ENUMX |
| BFD_RELOC_RL78_SYM |
| ENUMX |
| BFD_RELOC_RL78_OP_SUBTRACT |
| ENUMX |
| BFD_RELOC_RL78_OP_NEG |
| ENUMX |
| BFD_RELOC_RL78_OP_AND |
| ENUMX |
| BFD_RELOC_RL78_OP_SHRA |
| ENUMX |
| BFD_RELOC_RL78_ABS8 |
| ENUMX |
| BFD_RELOC_RL78_ABS16 |
| ENUMX |
| BFD_RELOC_RL78_ABS16_REV |
| ENUMX |
| BFD_RELOC_RL78_ABS32 |
| ENUMX |
| BFD_RELOC_RL78_ABS32_REV |
| ENUMX |
| BFD_RELOC_RL78_ABS16U |
| ENUMX |
| BFD_RELOC_RL78_ABS16UW |
| ENUMX |
| BFD_RELOC_RL78_ABS16UL |
| ENUMX |
| BFD_RELOC_RL78_RELAX |
| ENUMX |
| BFD_RELOC_RL78_HI16 |
| ENUMX |
| BFD_RELOC_RL78_HI8 |
| ENUMX |
| BFD_RELOC_RL78_LO16 |
| ENUMX |
| BFD_RELOC_RL78_CODE |
| ENUMX |
| BFD_RELOC_RL78_SADDR |
| ENUMDOC |
| Renesas RL78 Relocations. |
| |
| ENUM |
| BFD_RELOC_RX_NEG8 |
| ENUMX |
| BFD_RELOC_RX_NEG16 |
| ENUMX |
| BFD_RELOC_RX_NEG24 |
| ENUMX |
| BFD_RELOC_RX_NEG32 |
| ENUMX |
| BFD_RELOC_RX_16_OP |
| ENUMX |
| BFD_RELOC_RX_24_OP |
| ENUMX |
| BFD_RELOC_RX_32_OP |
| ENUMX |
| BFD_RELOC_RX_8U |
| ENUMX |
| BFD_RELOC_RX_16U |
| ENUMX |
| BFD_RELOC_RX_24U |
| ENUMX |
| BFD_RELOC_RX_DIR3U_PCREL |
| ENUMX |
| BFD_RELOC_RX_DIFF |
| ENUMX |
| BFD_RELOC_RX_GPRELB |
| ENUMX |
| BFD_RELOC_RX_GPRELW |
| ENUMX |
| BFD_RELOC_RX_GPRELL |
| ENUMX |
| BFD_RELOC_RX_SYM |
| ENUMX |
| BFD_RELOC_RX_OP_SUBTRACT |
| ENUMX |
| BFD_RELOC_RX_OP_NEG |
| ENUMX |
| BFD_RELOC_RX_ABS8 |
| ENUMX |
| BFD_RELOC_RX_ABS16 |
| ENUMX |
| BFD_RELOC_RX_ABS16_REV |
| ENUMX |
| BFD_RELOC_RX_ABS32 |
| ENUMX |
| BFD_RELOC_RX_ABS32_REV |
| ENUMX |
| BFD_RELOC_RX_ABS16U |
| ENUMX |
| BFD_RELOC_RX_ABS16UW |
| ENUMX |
| BFD_RELOC_RX_ABS16UL |
| ENUMX |
| BFD_RELOC_RX_RELAX |
| ENUMDOC |
| Renesas RX Relocations. |
| |
| ENUM |
| BFD_RELOC_390_12 |
| ENUMDOC |
| Direct 12 bit. |
| ENUM |
| BFD_RELOC_390_GOT12 |
| ENUMDOC |
| 12 bit GOT offset. |
| ENUM |
| BFD_RELOC_390_PLT32 |
| ENUMDOC |
| 32 bit PC relative PLT address. |
| ENUM |
| BFD_RELOC_390_COPY |
| ENUMDOC |
| Copy symbol at runtime. |
| ENUM |
| BFD_RELOC_390_GLOB_DAT |
| ENUMDOC |
| Create GOT entry. |
| ENUM |
| BFD_RELOC_390_JMP_SLOT |
| ENUMDOC |
| Create PLT entry. |
| ENUM |
| BFD_RELOC_390_RELATIVE |
| ENUMDOC |
| Adjust by program base. |
| ENUM |
| BFD_RELOC_390_GOTPC |
| ENUMDOC |
| 32 bit PC relative offset to GOT. |
| ENUM |
| BFD_RELOC_390_GOT16 |
| ENUMDOC |
| 16 bit GOT offset. |
| ENUM |
| BFD_RELOC_390_PC12DBL |
| ENUMDOC |
| PC relative 12 bit shifted by 1. |
| ENUM |
| BFD_RELOC_390_PLT12DBL |
| ENUMDOC |
| 12 bit PC rel. PLT shifted by 1. |
| ENUM |
| BFD_RELOC_390_PC16DBL |
| ENUMDOC |
| PC relative 16 bit shifted by 1. |
| ENUM |
| BFD_RELOC_390_PLT16DBL |
| ENUMDOC |
| 16 bit PC rel. PLT shifted by 1. |
| ENUM |
| BFD_RELOC_390_PC24DBL |
| ENUMDOC |
| PC relative 24 bit shifted by 1. |
| ENUM |
| BFD_RELOC_390_PLT24DBL |
| ENUMDOC |
| 24 bit PC rel. PLT shifted by 1. |
| ENUM |
| BFD_RELOC_390_PC32DBL |
| ENUMDOC |
| PC relative 32 bit shifted by 1. |
| ENUM |
| BFD_RELOC_390_PLT32DBL |
| ENUMDOC |
| 32 bit PC rel. PLT shifted by 1. |
| ENUM |
| BFD_RELOC_390_GOTPCDBL |
| ENUMDOC |
| 32 bit PC rel. GOT shifted by 1. |
| ENUM |
| BFD_RELOC_390_GOT64 |
| ENUMDOC |
| 64 bit GOT offset. |
| ENUM |
| BFD_RELOC_390_PLT64 |
| ENUMDOC |
| 64 bit PC relative PLT address. |
| ENUM |
| BFD_RELOC_390_GOTENT |
| ENUMDOC |
| 32 bit rel. offset to GOT entry. |
| ENUM |
| BFD_RELOC_390_GOTOFF64 |
| ENUMDOC |
| 64 bit offset to GOT. |
| ENUM |
| BFD_RELOC_390_GOTPLT12 |
| ENUMDOC |
| 12-bit offset to symbol-entry within GOT, with PLT handling. |
| ENUM |
| BFD_RELOC_390_GOTPLT16 |
| ENUMDOC |
| 16-bit offset to symbol-entry within GOT, with PLT handling. |
| ENUM |
| BFD_RELOC_390_GOTPLT32 |
| ENUMDOC |
| 32-bit offset to symbol-entry within GOT, with PLT handling. |
| ENUM |
| BFD_RELOC_390_GOTPLT64 |
| ENUMDOC |
| 64-bit offset to symbol-entry within GOT, with PLT handling. |
| ENUM |
| BFD_RELOC_390_GOTPLTENT |
| ENUMDOC |
| 32-bit rel. offset to symbol-entry within GOT, with PLT handling. |
| ENUM |
| BFD_RELOC_390_PLTOFF16 |
| ENUMDOC |
| 16-bit rel. offset from the GOT to a PLT entry. |
| ENUM |
| BFD_RELOC_390_PLTOFF32 |
| ENUMDOC |
| 32-bit rel. offset from the GOT to a PLT entry. |
| ENUM |
| BFD_RELOC_390_PLTOFF64 |
| ENUMDOC |
| 64-bit rel. offset from the GOT to a PLT entry. |
| |
| ENUM |
| BFD_RELOC_390_TLS_LOAD |
| ENUMX |
| BFD_RELOC_390_TLS_GDCALL |
| ENUMX |
| BFD_RELOC_390_TLS_LDCALL |
| ENUMX |
| BFD_RELOC_390_TLS_GD32 |
| ENUMX |
| BFD_RELOC_390_TLS_GD64 |
| ENUMX |
| BFD_RELOC_390_TLS_GOTIE12 |
| ENUMX |
| BFD_RELOC_390_TLS_GOTIE32 |
| ENUMX |
| BFD_RELOC_390_TLS_GOTIE64 |
| ENUMX |
| BFD_RELOC_390_TLS_LDM32 |
| ENUMX |
| BFD_RELOC_390_TLS_LDM64 |
| ENUMX |
| BFD_RELOC_390_TLS_IE32 |
| ENUMX |
| BFD_RELOC_390_TLS_IE64 |
| ENUMX |
| BFD_RELOC_390_TLS_IEENT |
| ENUMX |
| BFD_RELOC_390_TLS_LE32 |
| ENUMX |
| BFD_RELOC_390_TLS_LE64 |
| ENUMX |
| BFD_RELOC_390_TLS_LDO32 |
| ENUMX |
| BFD_RELOC_390_TLS_LDO64 |
| ENUMX |
| BFD_RELOC_390_TLS_DTPMOD |
| ENUMX |
| BFD_RELOC_390_TLS_DTPOFF |
| ENUMX |
| BFD_RELOC_390_TLS_TPOFF |
| ENUMDOC |
| s390 tls relocations. |
| |
| ENUM |
| BFD_RELOC_390_20 |
| ENUMX |
| BFD_RELOC_390_GOT20 |
| ENUMX |
| BFD_RELOC_390_GOTPLT20 |
| ENUMX |
| BFD_RELOC_390_TLS_GOTIE20 |
| ENUMDOC |
| Long displacement extension. |
| |
| ENUM |
| BFD_RELOC_390_IRELATIVE |
| ENUMDOC |
| STT_GNU_IFUNC relocation. |
| |
| ENUM |
| BFD_RELOC_SCORE_GPREL15 |
| ENUMDOC |
| Score relocations. |
| Low 16 bit for load/store. |
| ENUM |
| BFD_RELOC_SCORE_DUMMY2 |
| ENUMX |
| BFD_RELOC_SCORE_JMP |
| ENUMDOC |
| This is a 24-bit reloc with the right 1 bit assumed to be 0. |
| ENUM |
| BFD_RELOC_SCORE_BRANCH |
| ENUMDOC |
| This is a 19-bit reloc with the right 1 bit assumed to be 0. |
| ENUM |
| BFD_RELOC_SCORE_IMM30 |
| ENUMDOC |
| This is a 32-bit reloc for 48-bit instructions. |
| ENUM |
| BFD_RELOC_SCORE_IMM32 |
| ENUMDOC |
| This is a 32-bit reloc for 48-bit instructions. |
| ENUM |
| BFD_RELOC_SCORE16_JMP |
| ENUMDOC |
| This is a 11-bit reloc with the right 1 bit assumed to be 0. |
| ENUM |
| BFD_RELOC_SCORE16_BRANCH |
| ENUMDOC |
| This is a 8-bit reloc with the right 1 bit assumed to be 0. |
| ENUM |
| BFD_RELOC_SCORE_BCMP |
| ENUMDOC |
| This is a 9-bit reloc with the right 1 bit assumed to be 0. |
| ENUM |
| BFD_RELOC_SCORE_GOT15 |
| ENUMX |
| BFD_RELOC_SCORE_GOT_LO16 |
| ENUMX |
| BFD_RELOC_SCORE_CALL15 |
| ENUMX |
| BFD_RELOC_SCORE_DUMMY_HI16 |
| ENUMDOC |
| Undocumented Score relocs. |
| |
| ENUM |
| BFD_RELOC_IP2K_FR9 |
| ENUMDOC |
| Scenix IP2K - 9-bit register number / data address. |
| ENUM |
| BFD_RELOC_IP2K_BANK |
| ENUMDOC |
| Scenix IP2K - 4-bit register/data bank number. |
| ENUM |
| BFD_RELOC_IP2K_ADDR16CJP |
| ENUMDOC |
| Scenix IP2K - low 13 bits of instruction word address. |
| ENUM |
| BFD_RELOC_IP2K_PAGE3 |
| ENUMDOC |
| Scenix IP2K - high 3 bits of instruction word address. |
| ENUM |
| BFD_RELOC_IP2K_LO8DATA |
| ENUMX |
| BFD_RELOC_IP2K_HI8DATA |
| ENUMX |
| BFD_RELOC_IP2K_EX8DATA |
| ENUMDOC |
| Scenix IP2K - ext/low/high 8 bits of data address. |
| ENUM |
| BFD_RELOC_IP2K_LO8INSN |
| ENUMX |
| BFD_RELOC_IP2K_HI8INSN |
| ENUMDOC |
| Scenix IP2K - low/high 8 bits of instruction word address. |
| ENUM |
| BFD_RELOC_IP2K_PC_SKIP |
| ENUMDOC |
| Scenix IP2K - even/odd PC modifier to modify snb pcl.0. |
| ENUM |
| BFD_RELOC_IP2K_TEXT |
| ENUMDOC |
| Scenix IP2K - 16 bit word address in text section. |
| ENUM |
| BFD_RELOC_IP2K_FR_OFFSET |
| ENUMDOC |
| Scenix IP2K - 7-bit sp or dp offset. |
| ENUM |
| BFD_RELOC_VPE4KMATH_DATA |
| ENUMX |
| BFD_RELOC_VPE4KMATH_INSN |
| ENUMDOC |
| Scenix VPE4K coprocessor - data/insn-space addressing. |
| |
| ENUM |
| BFD_RELOC_VTABLE_INHERIT |
| ENUMX |
| BFD_RELOC_VTABLE_ENTRY |
| ENUMDOC |
| These two relocations are used by the linker to determine which of |
| the entries in a C++ virtual function table are actually used. When |
| the --gc-sections option is given, the linker will zero out the |
| entries that are not used, so that the code for those functions need |
| not be included in the output. |
| |
| VTABLE_INHERIT is a zero-space relocation used to describe to the |
| linker the inheritance tree of a C++ virtual function table. The |
| relocation's symbol should be the parent class' vtable, and the |
| relocation should be located at the child vtable. |
| |
| VTABLE_ENTRY is a zero-space relocation that describes the use of a |
| virtual function table entry. The reloc's symbol should refer to |
| the table of the class mentioned in the code. Off of that base, an |
| offset describes the entry that is being used. For Rela hosts, this |
| offset is stored in the reloc's addend. For Rel hosts, we are |
| forced to put this offset in the reloc's section offset. |
| |
| ENUM |
| BFD_RELOC_IA64_IMM14 |
| ENUMX |
| BFD_RELOC_IA64_IMM22 |
| ENUMX |
| BFD_RELOC_IA64_IMM64 |
| ENUMX |
| BFD_RELOC_IA64_DIR32MSB |
| ENUMX |
| BFD_RELOC_IA64_DIR32LSB |
| ENUMX |
| BFD_RELOC_IA64_DIR64MSB |
| ENUMX |
| BFD_RELOC_IA64_DIR64LSB |
| ENUMX |
| BFD_RELOC_IA64_GPREL22 |
| ENUMX |
| BFD_RELOC_IA64_GPREL64I |
| ENUMX |
| BFD_RELOC_IA64_GPREL32MSB |
| ENUMX |
| BFD_RELOC_IA64_GPREL32LSB |
| ENUMX |
| BFD_RELOC_IA64_GPREL64MSB |
| ENUMX |
| BFD_RELOC_IA64_GPREL64LSB |
| ENUMX |
| BFD_RELOC_IA64_LTOFF22 |
| ENUMX |
| BFD_RELOC_IA64_LTOFF64I |
| ENUMX |
| BFD_RELOC_IA64_PLTOFF22 |
| ENUMX |
| BFD_RELOC_IA64_PLTOFF64I |
| ENUMX |
| BFD_RELOC_IA64_PLTOFF64MSB |
| ENUMX |
| BFD_RELOC_IA64_PLTOFF64LSB |
| ENUMX |
| BFD_RELOC_IA64_FPTR64I |
| ENUMX |
| BFD_RELOC_IA64_FPTR32MSB |
| ENUMX |
| BFD_RELOC_IA64_FPTR32LSB |
| ENUMX |
| BFD_RELOC_IA64_FPTR64MSB |
| ENUMX |
| BFD_RELOC_IA64_FPTR64LSB |
| ENUMX |
| BFD_RELOC_IA64_PCREL21B |
| ENUMX |
| BFD_RELOC_IA64_PCREL21BI |
| ENUMX |
| BFD_RELOC_IA64_PCREL21M |
| ENUMX |
| BFD_RELOC_IA64_PCREL21F |
| ENUMX |
| BFD_RELOC_IA64_PCREL22 |
| ENUMX |
| BFD_RELOC_IA64_PCREL60B |
| ENUMX |
| BFD_RELOC_IA64_PCREL64I |
| ENUMX |
| BFD_RELOC_IA64_PCREL32MSB |
| ENUMX |
| BFD_RELOC_IA64_PCREL32LSB |
| ENUMX |
| BFD_RELOC_IA64_PCREL64MSB |
| ENUMX |
| BFD_RELOC_IA64_PCREL64LSB |
| ENUMX |
| BFD_RELOC_IA64_LTOFF_FPTR22 |
| ENUMX |
| BFD_RELOC_IA64_LTOFF_FPTR64I |
| ENUMX |
| BFD_RELOC_IA64_LTOFF_FPTR32MSB |
| ENUMX |
| BFD_RELOC_IA64_LTOFF_FPTR32LSB |
| ENUMX |
| BFD_RELOC_IA64_LTOFF_FPTR64MSB |
| ENUMX |
| BFD_RELOC_IA64_LTOFF_FPTR64LSB |
| ENUMX |
| BFD_RELOC_IA64_SEGREL32MSB |
| ENUMX |
| BFD_RELOC_IA64_SEGREL32LSB |
| ENUMX |
| BFD_RELOC_IA64_SEGREL64MSB |
| ENUMX |
| BFD_RELOC_IA64_SEGREL64LSB |
| ENUMX |
| BFD_RELOC_IA64_SECREL32MSB |
| ENUMX |
| BFD_RELOC_IA64_SECREL32LSB |
| ENUMX |
| BFD_RELOC_IA64_SECREL64MSB |
| ENUMX |
| BFD_RELOC_IA64_SECREL64LSB |
| ENUMX |
| BFD_RELOC_IA64_REL32MSB |
| ENUMX |
| BFD_RELOC_IA64_REL32LSB |
| ENUMX |
| BFD_RELOC_IA64_REL64MSB |
| ENUMX |
| BFD_RELOC_IA64_REL64LSB |
| ENUMX |
| BFD_RELOC_IA64_LTV32MSB |
| ENUMX |
| BFD_RELOC_IA64_LTV32LSB |
| ENUMX |
| BFD_RELOC_IA64_LTV64MSB |
| ENUMX |
| BFD_RELOC_IA64_LTV64LSB |
| ENUMX |
| BFD_RELOC_IA64_IPLTMSB |
| ENUMX |
| BFD_RELOC_IA64_IPLTLSB |
| ENUMX |
| BFD_RELOC_IA64_COPY |
| ENUMX |
| BFD_RELOC_IA64_LTOFF22X |
| ENUMX |
| BFD_RELOC_IA64_LDXMOV |
| ENUMX |
| BFD_RELOC_IA64_TPREL14 |
| ENUMX |
| BFD_RELOC_IA64_TPREL22 |
| ENUMX |
| BFD_RELOC_IA64_TPREL64I |
| ENUMX |
| BFD_RELOC_IA64_TPREL64MSB |
| ENUMX |
| BFD_RELOC_IA64_TPREL64LSB |
| ENUMX |
| BFD_RELOC_IA64_LTOFF_TPREL22 |
| ENUMX |
| BFD_RELOC_IA64_DTPMOD64MSB |
| ENUMX |
| BFD_RELOC_IA64_DTPMOD64LSB |
| ENUMX |
| BFD_RELOC_IA64_LTOFF_DTPMOD22 |
| ENUMX |
| BFD_RELOC_IA64_DTPREL14 |
| ENUMX |
| BFD_RELOC_IA64_DTPREL22 |
| ENUMX |
| BFD_RELOC_IA64_DTPREL64I |
| ENUMX |
| BFD_RELOC_IA64_DTPREL32MSB |
| ENUMX |
| BFD_RELOC_IA64_DTPREL32LSB |
| ENUMX |
| BFD_RELOC_IA64_DTPREL64MSB |
| ENUMX |
| BFD_RELOC_IA64_DTPREL64LSB |
| ENUMX |
| BFD_RELOC_IA64_LTOFF_DTPREL22 |
| ENUMDOC |
| Intel IA64 Relocations. |
| |
| ENUM |
| BFD_RELOC_M68HC11_HI8 |
| ENUMDOC |
| Motorola 68HC11 reloc. |
| This is the 8 bit high part of an absolute address. |
| ENUM |
| BFD_RELOC_M68HC11_LO8 |
| ENUMDOC |
| Motorola 68HC11 reloc. |
| This is the 8 bit low part of an absolute address. |
| ENUM |
| BFD_RELOC_M68HC11_3B |
| ENUMDOC |
| Motorola 68HC11 reloc. |
| This is the 3 bit of a value. |
| ENUM |
| BFD_RELOC_M68HC11_RL_JUMP |
| ENUMDOC |
| Motorola 68HC11 reloc. |
| This reloc marks the beginning of a jump/call instruction. |
| It is used for linker relaxation to correctly identify beginning |
| of instruction and change some branches to use PC-relative |
| addressing mode. |
| ENUM |
| BFD_RELOC_M68HC11_RL_GROUP |
| ENUMDOC |
| Motorola 68HC11 reloc. |
| This reloc marks a group of several instructions that gcc generates |
| and for which the linker relaxation pass can modify and/or remove |
| some of them. |
| ENUM |
| BFD_RELOC_M68HC11_LO16 |
| ENUMDOC |
| Motorola 68HC11 reloc. |
| This is the 16-bit lower part of an address. It is used for 'call' |
| instruction to specify the symbol address without any special |
| transformation (due to memory bank window). |
| ENUM |
| BFD_RELOC_M68HC11_PAGE |
| ENUMDOC |
| Motorola 68HC11 reloc. |
| This is a 8-bit reloc that specifies the page number of an address. |
| It is used by 'call' instruction to specify the page number of |
| the symbol. |
| ENUM |
| BFD_RELOC_M68HC11_24 |
| ENUMDOC |
| Motorola 68HC11 reloc. |
| This is a 24-bit reloc that represents the address with a 16-bit |
| value and a 8-bit page number. The symbol address is transformed |
| to follow the 16K memory bank of 68HC12 (seen as mapped in the |
| window). |
| ENUM |
| BFD_RELOC_M68HC12_5B |
| ENUMDOC |
| Motorola 68HC12 reloc. |
| This is the 5 bits of a value. |
| ENUM |
| BFD_RELOC_XGATE_RL_JUMP |
| ENUMDOC |
| Freescale XGATE reloc. |
| This reloc marks the beginning of a bra/jal instruction. |
| ENUM |
| BFD_RELOC_XGATE_RL_GROUP |
| ENUMDOC |
| Freescale XGATE reloc. |
| This reloc marks a group of several instructions that gcc generates |
| and for which the linker relaxation pass can modify and/or remove |
| some of them. |
| ENUM |
| BFD_RELOC_XGATE_LO16 |
| ENUMDOC |
| Freescale XGATE reloc. |
| This is the 16-bit lower part of an address. It is used for the |
| '16-bit' instructions. |
| ENUM |
| BFD_RELOC_XGATE_GPAGE |
| ENUMDOC |
| Freescale XGATE reloc. |
| ENUM |
| BFD_RELOC_XGATE_24 |
| ENUMDOC |
| Freescale XGATE reloc. |
| ENUM |
| BFD_RELOC_XGATE_PCREL_9 |
| ENUMDOC |
| Freescale XGATE reloc. |
| This is a 9-bit pc-relative reloc. |
| ENUM |
| BFD_RELOC_XGATE_PCREL_10 |
| ENUMDOC |
| Freescale XGATE reloc. |
| This is a 10-bit pc-relative reloc. |
| ENUM |
| BFD_RELOC_XGATE_IMM8_LO |
| ENUMDOC |
| Freescale XGATE reloc. |
| This is the 16-bit lower part of an address. It is used for the |
| '16-bit' instructions. |
| ENUM |
| BFD_RELOC_XGATE_IMM8_HI |
| ENUMDOC |
| Freescale XGATE reloc. |
| This is the 16-bit higher part of an address. It is used for the |
| '16-bit' instructions. |
| ENUM |
| BFD_RELOC_XGATE_IMM3 |
| ENUMDOC |
| Freescale XGATE reloc. |
| This is a 3-bit pc-relative reloc. |
| ENUM |
| BFD_RELOC_XGATE_IMM4 |
| ENUMDOC |
| Freescale XGATE reloc. |
| This is a 4-bit pc-relative reloc. |
| ENUM |
| BFD_RELOC_XGATE_IMM5 |
| ENUMDOC |
| Freescale XGATE reloc. |
| This is a 5-bit pc-relative reloc. |
| ENUM |
| BFD_RELOC_M68HC12_9B |
| ENUMDOC |
| Motorola 68HC12 reloc. |
| This is the 9 bits of a value. |
| ENUM |
| BFD_RELOC_M68HC12_16B |
| ENUMDOC |
| Motorola 68HC12 reloc. |
| This is the 16 bits of a value. |
| ENUM |
| BFD_RELOC_M68HC12_9_PCREL |
| ENUMDOC |
| Motorola 68HC12/XGATE reloc. |
| This is a PCREL9 branch. |
| ENUM |
| BFD_RELOC_M68HC12_10_PCREL |
| ENUMDOC |
| Motorola 68HC12/XGATE reloc. |
| This is a PCREL10 branch. |
| ENUM |
| BFD_RELOC_M68HC12_LO8XG |
| ENUMDOC |
| Motorola 68HC12/XGATE reloc. |
| This is the 8 bit low part of an absolute address and immediately |
| precedes a matching HI8XG part. |
| ENUM |
| BFD_RELOC_M68HC12_HI8XG |
| ENUMDOC |
| Motorola 68HC12/XGATE reloc. |
| This is the 8 bit high part of an absolute address and immediately |
| follows a matching LO8XG part. |
| ENUM |
| BFD_RELOC_S12Z_15_PCREL |
| ENUMDOC |
| Freescale S12Z reloc. |
| This is a 15 bit relative address. If the most significant bits are |
| all zero then it may be truncated to 8 bits. |
| |
| ENUM |
| BFD_RELOC_CR16_NUM8 |
| ENUMX |
| BFD_RELOC_CR16_NUM16 |
| ENUMX |
| BFD_RELOC_CR16_NUM32 |
| ENUMX |
| BFD_RELOC_CR16_NUM32a |
| ENUMX |
| BFD_RELOC_CR16_REGREL0 |
| ENUMX |
| BFD_RELOC_CR16_REGREL4 |
| ENUMX |
| BFD_RELOC_CR16_REGREL4a |
| ENUMX |
| BFD_RELOC_CR16_REGREL14 |
| ENUMX |
| BFD_RELOC_CR16_REGREL14a |
| ENUMX |
| BFD_RELOC_CR16_REGREL16 |
| ENUMX |
| BFD_RELOC_CR16_REGREL20 |
| ENUMX |
| BFD_RELOC_CR16_REGREL20a |
| ENUMX |
| BFD_RELOC_CR16_ABS20 |
| ENUMX |
| BFD_RELOC_CR16_ABS24 |
| ENUMX |
| BFD_RELOC_CR16_IMM4 |
| ENUMX |
| BFD_RELOC_CR16_IMM8 |
| ENUMX |
| BFD_RELOC_CR16_IMM16 |
| ENUMX |
| BFD_RELOC_CR16_IMM20 |
| ENUMX |
| BFD_RELOC_CR16_IMM24 |
| ENUMX |
| BFD_RELOC_CR16_IMM32 |
| ENUMX |
| BFD_RELOC_CR16_IMM32a |
| ENUMX |
| BFD_RELOC_CR16_DISP4 |
| ENUMX |
| BFD_RELOC_CR16_DISP8 |
| ENUMX |
| BFD_RELOC_CR16_DISP16 |
| ENUMX |
| BFD_RELOC_CR16_DISP20 |
| ENUMX |
| BFD_RELOC_CR16_DISP24 |
| ENUMX |
| BFD_RELOC_CR16_DISP24a |
| ENUMX |
| BFD_RELOC_CR16_SWITCH8 |
| ENUMX |
| BFD_RELOC_CR16_SWITCH16 |
| ENUMX |
| BFD_RELOC_CR16_SWITCH32 |
| ENUMX |
| BFD_RELOC_CR16_GOT_REGREL20 |
| ENUMX |
| BFD_RELOC_CR16_GOTC_REGREL20 |
| ENUMX |
| BFD_RELOC_CR16_GLOB_DAT |
| ENUMDOC |
| NS CR16 Relocations. |
| |
| ENUM |
| BFD_RELOC_CRX_REL4 |
| ENUMX |
| BFD_RELOC_CRX_REL8 |
| ENUMX |
| BFD_RELOC_CRX_REL8_CMP |
| ENUMX |
| BFD_RELOC_CRX_REL16 |
| ENUMX |
| BFD_RELOC_CRX_REL24 |
| ENUMX |
| BFD_RELOC_CRX_REL32 |
| ENUMX |
| BFD_RELOC_CRX_REGREL12 |
| ENUMX |
| BFD_RELOC_CRX_REGREL22 |
| ENUMX |
| BFD_RELOC_CRX_REGREL28 |
| ENUMX |
| BFD_RELOC_CRX_REGREL32 |
| ENUMX |
| BFD_RELOC_CRX_ABS16 |
| ENUMX |
| BFD_RELOC_CRX_ABS32 |
| ENUMX |
| BFD_RELOC_CRX_NUM8 |
| ENUMX |
| BFD_RELOC_CRX_NUM16 |
| ENUMX |
| BFD_RELOC_CRX_NUM32 |
| ENUMX |
| BFD_RELOC_CRX_IMM16 |
| ENUMX |
| BFD_RELOC_CRX_IMM32 |
| ENUMX |
| BFD_RELOC_CRX_SWITCH8 |
| ENUMX |
| BFD_RELOC_CRX_SWITCH16 |
| ENUMX |
| BFD_RELOC_CRX_SWITCH32 |
| ENUMDOC |
| NS CRX Relocations. |
| |
| ENUM |
| BFD_RELOC_CRIS_BDISP8 |
| ENUMX |
| BFD_RELOC_CRIS_UNSIGNED_5 |
| ENUMX |
| BFD_RELOC_CRIS_SIGNED_6 |
| ENUMX |
| BFD_RELOC_CRIS_UNSIGNED_6 |
| ENUMX |
| BFD_RELOC_CRIS_SIGNED_8 |
| ENUMX |
| BFD_RELOC_CRIS_UNSIGNED_8 |
| ENUMX |
| BFD_RELOC_CRIS_SIGNED_16 |
| ENUMX |
| BFD_RELOC_CRIS_UNSIGNED_16 |
| ENUMX |
| BFD_RELOC_CRIS_LAPCQ_OFFSET |
| ENUMX |
| BFD_RELOC_CRIS_UNSIGNED_4 |
| ENUMDOC |
| These relocs are only used within the CRIS assembler. They are not |
| (at present) written to any object files. |
| ENUM |
| BFD_RELOC_CRIS_COPY |
| ENUMX |
| BFD_RELOC_CRIS_GLOB_DAT |
| ENUMX |
| BFD_RELOC_CRIS_JUMP_SLOT |
| ENUMX |
| BFD_RELOC_CRIS_RELATIVE |
| ENUMDOC |
| Relocs used in ELF shared libraries for CRIS. |
| ENUM |
| BFD_RELOC_CRIS_32_GOT |
| ENUMDOC |
| 32-bit offset to symbol-entry within GOT. |
| ENUM |
| BFD_RELOC_CRIS_16_GOT |
| ENUMDOC |
| 16-bit offset to symbol-entry within GOT. |
| ENUM |
| BFD_RELOC_CRIS_32_GOTPLT |
| ENUMDOC |
| 32-bit offset to symbol-entry within GOT, with PLT handling. |
| ENUM |
| BFD_RELOC_CRIS_16_GOTPLT |
| ENUMDOC |
| 16-bit offset to symbol-entry within GOT, with PLT handling. |
| ENUM |
| BFD_RELOC_CRIS_32_GOTREL |
| ENUMDOC |
| 32-bit offset to symbol, relative to GOT. |
| ENUM |
| BFD_RELOC_CRIS_32_PLT_GOTREL |
| ENUMDOC |
| 32-bit offset to symbol with PLT entry, relative to GOT. |
| ENUM |
| BFD_RELOC_CRIS_32_PLT_PCREL |
| ENUMDOC |
| 32-bit offset to symbol with PLT entry, relative to this |
| relocation. |
| |
| ENUM |
| BFD_RELOC_CRIS_32_GOT_GD |
| ENUMX |
| BFD_RELOC_CRIS_16_GOT_GD |
| ENUMX |
| BFD_RELOC_CRIS_32_GD |
| ENUMX |
| BFD_RELOC_CRIS_DTP |
| ENUMX |
| BFD_RELOC_CRIS_32_DTPREL |
| ENUMX |
| BFD_RELOC_CRIS_16_DTPREL |
| ENUMX |
| BFD_RELOC_CRIS_32_GOT_TPREL |
| ENUMX |
| BFD_RELOC_CRIS_16_GOT_TPREL |
| ENUMX |
| BFD_RELOC_CRIS_32_TPREL |
| ENUMX |
| BFD_RELOC_CRIS_16_TPREL |
| ENUMX |
| BFD_RELOC_CRIS_DTPMOD |
| ENUMX |
| BFD_RELOC_CRIS_32_IE |
| ENUMDOC |
| Relocs used in TLS code for CRIS. |
| |
| ENUM |
| BFD_RELOC_OR1K_REL_26 |
| ENUMX |
| BFD_RELOC_OR1K_SLO16 |
| ENUMX |
| BFD_RELOC_OR1K_PCREL_PG21 |
| ENUMX |
| BFD_RELOC_OR1K_LO13 |
| ENUMX |
| BFD_RELOC_OR1K_SLO13 |
| ENUMX |
| BFD_RELOC_OR1K_GOTPC_HI16 |
| ENUMX |
| BFD_RELOC_OR1K_GOTPC_LO16 |
| ENUMX |
| BFD_RELOC_OR1K_GOT_AHI16 |
| ENUMX |
| BFD_RELOC_OR1K_GOT16 |
| ENUMX |
| BFD_RELOC_OR1K_GOT_PG21 |
| ENUMX |
| BFD_RELOC_OR1K_GOT_LO13 |
| ENUMX |
| BFD_RELOC_OR1K_PLT26 |
| ENUMX |
| BFD_RELOC_OR1K_PLTA26 |
| ENUMX |
| BFD_RELOC_OR1K_GOTOFF_SLO16 |
| ENUMX |
| BFD_RELOC_OR1K_COPY |
| ENUMX |
| BFD_RELOC_OR1K_GLOB_DAT |
| ENUMX |
| BFD_RELOC_OR1K_JMP_SLOT |
| ENUMX |
| BFD_RELOC_OR1K_RELATIVE |
| ENUMX |
| BFD_RELOC_OR1K_TLS_GD_HI16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_GD_LO16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_GD_PG21 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_GD_LO13 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LDM_HI16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LDM_LO16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LDM_PG21 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LDM_LO13 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LDO_HI16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LDO_LO16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_IE_HI16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_IE_AHI16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_IE_LO16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_IE_PG21 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_IE_LO13 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LE_HI16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LE_AHI16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LE_LO16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_LE_SLO16 |
| ENUMX |
| BFD_RELOC_OR1K_TLS_TPOFF |
| ENUMX |
| BFD_RELOC_OR1K_TLS_DTPOFF |
| ENUMX |
| BFD_RELOC_OR1K_TLS_DTPMOD |
| ENUMDOC |
| OpenRISC 1000 Relocations. |
| |
| ENUM |
| BFD_RELOC_H8_DIR16A8 |
| ENUMX |
| BFD_RELOC_H8_DIR16R8 |
| ENUMX |
| BFD_RELOC_H8_DIR24A8 |
| ENUMX |
| BFD_RELOC_H8_DIR24R8 |
| ENUMX |
| BFD_RELOC_H8_DIR32A16 |
| ENUMX |
| BFD_RELOC_H8_DISP32A16 |
| ENUMDOC |
| H8 elf Relocations. |
| |
| ENUM |
| BFD_RELOC_XSTORMY16_REL_12 |
| ENUMX |
| BFD_RELOC_XSTORMY16_12 |
| ENUMX |
| BFD_RELOC_XSTORMY16_24 |
| ENUMX |
| BFD_RELOC_XSTORMY16_FPTR16 |
| ENUMDOC |
| Sony Xstormy16 Relocations. |
| |
| ENUM |
| BFD_RELOC_RELC |
| ENUMDOC |
| Self-describing complex relocations. |
| |
| ENUM |
| BFD_RELOC_VAX_GLOB_DAT |
| ENUMX |
| BFD_RELOC_VAX_JMP_SLOT |
| ENUMX |
| BFD_RELOC_VAX_RELATIVE |
| ENUMDOC |
| Relocations used by VAX ELF. |
| |
| ENUM |
| BFD_RELOC_MT_PC16 |
| ENUMDOC |
| Morpho MT - 16 bit immediate relocation. |
| ENUM |
| BFD_RELOC_MT_HI16 |
| ENUMDOC |
| Morpho MT - Hi 16 bits of an address. |
| ENUM |
| BFD_RELOC_MT_LO16 |
| ENUMDOC |
| Morpho MT - Low 16 bits of an address. |
| ENUM |
| BFD_RELOC_MT_GNU_VTINHERIT |
| ENUMDOC |
| Morpho MT - Used to tell the linker which vtable entries are used. |
| ENUM |
| BFD_RELOC_MT_GNU_VTENTRY |
| ENUMDOC |
| Morpho MT - Used to tell the linker which vtable entries are used. |
| ENUM |
| BFD_RELOC_MT_PCINSN8 |
| ENUMDOC |
| Morpho MT - 8 bit immediate relocation. |
| |
| ENUM |
| BFD_RELOC_MSP430_10_PCREL |
| ENUMX |
| BFD_RELOC_MSP430_16_PCREL |
| ENUMX |
| BFD_RELOC_MSP430_16 |
| ENUMX |
| BFD_RELOC_MSP430_16_PCREL_BYTE |
| ENUMX |
| BFD_RELOC_MSP430_16_BYTE |
| ENUMX |
| BFD_RELOC_MSP430_2X_PCREL |
| ENUMX |
| BFD_RELOC_MSP430_RL_PCREL |
| ENUMX |
| BFD_RELOC_MSP430_ABS8 |
| ENUMX |
| BFD_RELOC_MSP430X_PCR20_EXT_SRC |
| ENUMX |
| BFD_RELOC_MSP430X_PCR20_EXT_DST |
| ENUMX |
| BFD_RELOC_MSP430X_PCR20_EXT_ODST |
| ENUMX |
| BFD_RELOC_MSP430X_ABS20_EXT_SRC |
| ENUMX |
| BFD_RELOC_MSP430X_ABS20_EXT_DST |
| ENUMX |
| BFD_RELOC_MSP430X_ABS20_EXT_ODST |
| ENUMX |
| BFD_RELOC_MSP430X_ABS20_ADR_SRC |
| ENUMX |
| BFD_RELOC_MSP430X_ABS20_ADR_DST |
| ENUMX |
| BFD_RELOC_MSP430X_PCR16 |
| ENUMX |
| BFD_RELOC_MSP430X_PCR20_CALL |
| ENUMX |
| BFD_RELOC_MSP430X_ABS16 |
| ENUMX |
| BFD_RELOC_MSP430_ABS_HI16 |
| ENUMX |
| BFD_RELOC_MSP430_PREL31 |
| ENUMX |
| BFD_RELOC_MSP430_SYM_DIFF |
| ENUMX |
| BFD_RELOC_MSP430_SET_ULEB128 |
| ENUMX |
| BFD_RELOC_MSP430_SUB_ULEB128 |
| ENUMDOC |
| msp430 specific relocation codes. |
| |
| ENUM |
| BFD_RELOC_NIOS2_S16 |
| ENUMX |
| BFD_RELOC_NIOS2_U16 |
| ENUMX |
| BFD_RELOC_NIOS2_CALL26 |
| ENUMX |
| BFD_RELOC_NIOS2_IMM5 |
| ENUMX |
| BFD_RELOC_NIOS2_CACHE_OPX |
| ENUMX |
| BFD_RELOC_NIOS2_IMM6 |
| ENUMX |
| BFD_RELOC_NIOS2_IMM8 |
| ENUMX |
| BFD_RELOC_NIOS2_HI16 |
| ENUMX |
| BFD_RELOC_NIOS2_LO16 |
| ENUMX |
| BFD_RELOC_NIOS2_HIADJ16 |
| ENUMX |
| BFD_RELOC_NIOS2_GPREL |
| ENUMX |
| BFD_RELOC_NIOS2_UJMP |
| ENUMX |
| BFD_RELOC_NIOS2_CJMP |
| ENUMX |
| BFD_RELOC_NIOS2_CALLR |
| ENUMX |
| BFD_RELOC_NIOS2_ALIGN |
| ENUMX |
| BFD_RELOC_NIOS2_GOT16 |
| ENUMX |
| BFD_RELOC_NIOS2_CALL16 |
| ENUMX |
| BFD_RELOC_NIOS2_GOTOFF_LO |
| ENUMX |
| BFD_RELOC_NIOS2_GOTOFF_HA |
| ENUMX |
| BFD_RELOC_NIOS2_PCREL_LO |
| ENUMX |
| BFD_RELOC_NIOS2_PCREL_HA |
| ENUMX |
| BFD_RELOC_NIOS2_TLS_GD16 |
| ENUMX |
| BFD_RELOC_NIOS2_TLS_LDM16 |
| ENUMX |
| BFD_RELOC_NIOS2_TLS_LDO16 |
| ENUMX |
| BFD_RELOC_NIOS2_TLS_IE16 |
| ENUMX |
| BFD_RELOC_NIOS2_TLS_LE16 |
| ENUMX |
| BFD_RELOC_NIOS2_TLS_DTPMOD |
| ENUMX |
| BFD_RELOC_NIOS2_TLS_DTPREL |
| ENUMX |
| BFD_RELOC_NIOS2_TLS_TPREL |
| ENUMX |
| BFD_RELOC_NIOS2_COPY |
| ENUMX |
| BFD_RELOC_NIOS2_GLOB_DAT |
| ENUMX |
| BFD_RELOC_NIOS2_JUMP_SLOT |
| ENUMX |
| BFD_RELOC_NIOS2_RELATIVE |
| ENUMX |
| BFD_RELOC_NIOS2_GOTOFF |
| ENUMX |
| BFD_RELOC_NIOS2_CALL26_NOAT |
| ENUMX |
| BFD_RELOC_NIOS2_GOT_LO |
| ENUMX |
| BFD_RELOC_NIOS2_GOT_HA |
| ENUMX |
| BFD_RELOC_NIOS2_CALL_LO |
| ENUMX |
| BFD_RELOC_NIOS2_CALL_HA |
| ENUMX |
| BFD_RELOC_NIOS2_R2_S12 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_I10_1_PCREL |
| ENUMX |
| BFD_RELOC_NIOS2_R2_T1I7_1_PCREL |
| ENUMX |
| BFD_RELOC_NIOS2_R2_T1I7_2 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_T2I4 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_T2I4_1 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_T2I4_2 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_X1I7_2 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_X2L5 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_F1I5_2 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_L5I4X1 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_T1X1I6 |
| ENUMX |
| BFD_RELOC_NIOS2_R2_T1X1I6_2 |
| ENUMDOC |
| Relocations used by the Altera Nios II core. |
| |
| ENUM |
| BFD_RELOC_PRU_U16 |
| ENUMDOC |
| PRU LDI 16-bit unsigned data-memory relocation. |
| ENUM |
| BFD_RELOC_PRU_U16_PMEMIMM |
| ENUMDOC |
| PRU LDI 16-bit unsigned instruction-memory relocation. |
| ENUM |
| BFD_RELOC_PRU_LDI32 |
| ENUMDOC |
| PRU relocation for two consecutive LDI load instructions that load a |
| 32 bit value into a register. If the higher bits are all zero, then |
| the second instruction may be relaxed. |
| ENUM |
| BFD_RELOC_PRU_S10_PCREL |
| ENUMDOC |
| PRU QBBx 10-bit signed PC-relative relocation. |
| ENUM |
| BFD_RELOC_PRU_U8_PCREL |
| ENUMDOC |
| PRU 8-bit unsigned relocation used for the LOOP instruction. |
| ENUM |
| BFD_RELOC_PRU_32_PMEM |
| ENUMX |
| BFD_RELOC_PRU_16_PMEM |
| ENUMDOC |
| PRU Program Memory relocations. Used to convert from byte |
| addressing to 32-bit word addressing. |
| ENUM |
| BFD_RELOC_PRU_GNU_DIFF8 |
| ENUMX |
| BFD_RELOC_PRU_GNU_DIFF16 |
| ENUMX |
| BFD_RELOC_PRU_GNU_DIFF32 |
| ENUMX |
| BFD_RELOC_PRU_GNU_DIFF16_PMEM |
| ENUMX |
| BFD_RELOC_PRU_GNU_DIFF32_PMEM |
| ENUMDOC |
| PRU relocations to mark the difference of two local symbols. |
| These are only needed to support linker relaxation and can be |
| ignored when not relaxing. The field is set to the value of the |
| difference assuming no relaxation. The relocation encodes the |
| position of the second symbol so the linker can determine whether to |
| adjust the field value. The PMEM variants encode the word |
| difference, instead of byte difference between symbols. |
| |
| ENUM |
| BFD_RELOC_IQ2000_OFFSET_16 |
| ENUMX |
| BFD_RELOC_IQ2000_OFFSET_21 |
| ENUMX |
| BFD_RELOC_IQ2000_UHI16 |
| ENUMDOC |
| IQ2000 Relocations. |
| |
| ENUM |
| BFD_RELOC_XTENSA_RTLD |
| ENUMDOC |
| Special Xtensa relocation used only by PLT entries in ELF shared |
| objects to indicate that the runtime linker should set the value |
| to one of its own internal functions or data structures. |
| ENUM |
| BFD_RELOC_XTENSA_GLOB_DAT |
| ENUMX |
| BFD_RELOC_XTENSA_JMP_SLOT |
| ENUMX |
| BFD_RELOC_XTENSA_RELATIVE |
| ENUMDOC |
| Xtensa relocations for ELF shared objects. |
| ENUM |
| BFD_RELOC_XTENSA_PLT |
| ENUMDOC |
| Xtensa relocation used in ELF object files for symbols that may |
| require PLT entries. Otherwise, this is just a generic 32-bit |
| relocation. |
| ENUM |
| BFD_RELOC_XTENSA_DIFF8 |
| ENUMX |
| BFD_RELOC_XTENSA_DIFF16 |
| ENUMX |
| BFD_RELOC_XTENSA_DIFF32 |
| ENUMDOC |
| Xtensa relocations for backward compatibility. These have been |
| replaced by BFD_RELOC_XTENSA_PDIFF and BFD_RELOC_XTENSA_NDIFF. |
| Xtensa relocations to mark the difference of two local symbols. |
| These are only needed to support linker relaxation and can be |
| ignored when not relaxing. The field is set to the value of the |
| difference assuming no relaxation. The relocation encodes the |
| position of the first symbol so the linker can determine whether to |
| adjust the field value. |
| ENUM |
| BFD_RELOC_XTENSA_SLOT0_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT1_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT2_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT3_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT4_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT5_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT6_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT7_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT8_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT9_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT10_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT11_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT12_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT13_OP |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT14_OP |
| ENUMDOC |
| Generic Xtensa relocations for instruction operands. Only the slot |
| number is encoded in the relocation. The relocation applies to the |
| last PC-relative immediate operand, or if there are no PC-relative |
| immediates, to the last immediate operand. |
| ENUM |
| BFD_RELOC_XTENSA_SLOT0_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT1_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT2_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT3_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT4_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT5_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT6_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT7_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT8_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT9_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT10_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT11_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT12_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT13_ALT |
| ENUMX |
| BFD_RELOC_XTENSA_SLOT14_ALT |
| ENUMDOC |
| Alternate Xtensa relocations. Only the slot is encoded in the |
| relocation. The meaning of these relocations is opcode-specific. |
| ENUM |
| BFD_RELOC_XTENSA_OP0 |
| ENUMX |
| BFD_RELOC_XTENSA_OP1 |
| ENUMX |
| BFD_RELOC_XTENSA_OP2 |
| ENUMDOC |
| Xtensa relocations for backward compatibility. These have all been |
| replaced by BFD_RELOC_XTENSA_SLOT0_OP. |
| ENUM |
| BFD_RELOC_XTENSA_ASM_EXPAND |
| ENUMDOC |
| Xtensa relocation to mark that the assembler expanded the |
| instructions from an original target. The expansion size is |
| encoded in the reloc size. |
| ENUM |
| BFD_RELOC_XTENSA_ASM_SIMPLIFY |
| ENUMDOC |
| Xtensa relocation to mark that the linker should simplify |
| assembler-expanded instructions. This is commonly used |
| internally by the linker after analysis of a |
| BFD_RELOC_XTENSA_ASM_EXPAND. |
| ENUM |
| BFD_RELOC_XTENSA_TLSDESC_FN |
| ENUMX |
| BFD_RELOC_XTENSA_TLSDESC_ARG |
| ENUMX |
| BFD_RELOC_XTENSA_TLS_DTPOFF |
| ENUMX |
| BFD_RELOC_XTENSA_TLS_TPOFF |
| ENUMX |
| BFD_RELOC_XTENSA_TLS_FUNC |
| ENUMX |
| BFD_RELOC_XTENSA_TLS_ARG |
| ENUMX |
| BFD_RELOC_XTENSA_TLS_CALL |
| ENUMDOC |
| Xtensa TLS relocations. |
| ENUM |
| BFD_RELOC_XTENSA_PDIFF8 |
| ENUMX |
| BFD_RELOC_XTENSA_PDIFF16 |
| ENUMX |
| BFD_RELOC_XTENSA_PDIFF32 |
| ENUMX |
| BFD_RELOC_XTENSA_NDIFF8 |
| ENUMX |
| BFD_RELOC_XTENSA_NDIFF16 |
| ENUMX |
| BFD_RELOC_XTENSA_NDIFF32 |
| ENUMDOC |
| Xtensa relocations to mark the difference of two local symbols. |
| These are only needed to support linker relaxation and can be |
| ignored when not relaxing. The field is set to the value of the |
| difference assuming no relaxation. The relocation encodes the |
| position of the subtracted symbol so the linker can determine |
| whether to adjust the field value. PDIFF relocations are used for |
| positive differences, NDIFF relocations are used for negative |
| differences. The difference value is treated as unsigned with these |
| relocation types, giving full 8/16 value ranges. |
| |
| ENUM |
| BFD_RELOC_Z80_DISP8 |
| ENUMDOC |
| 8 bit signed offset in (ix+d) or (iy+d). |
| ENUM |
| BFD_RELOC_Z80_BYTE0 |
| ENUMDOC |
| First 8 bits of multibyte (32, 24 or 16 bit) value. |
| ENUM |
| BFD_RELOC_Z80_BYTE1 |
| ENUMDOC |
| Second 8 bits of multibyte (32, 24 or 16 bit) value. |
| ENUM |
| BFD_RELOC_Z80_BYTE2 |
| ENUMDOC |
| Third 8 bits of multibyte (32 or 24 bit) value. |
| ENUM |
| BFD_RELOC_Z80_BYTE3 |
| ENUMDOC |
| Fourth 8 bits of multibyte (32 bit) value. |
| ENUM |
| BFD_RELOC_Z80_WORD0 |
| ENUMDOC |
| Lowest 16 bits of multibyte (32 or 24 bit) value. |
| ENUM |
| BFD_RELOC_Z80_WORD1 |
| ENUMDOC |
| Highest 16 bits of multibyte (32 or 24 bit) value. |
| ENUM |
| BFD_RELOC_Z80_16_BE |
| ENUMDOC |
| Like BFD_RELOC_16 but big-endian. |
| |
| ENUM |
| BFD_RELOC_Z8K_DISP7 |
| ENUMDOC |
| DJNZ offset. |
| ENUM |
| BFD_RELOC_Z8K_CALLR |
| ENUMDOC |
| CALR offset. |
| ENUM |
| BFD_RELOC_Z8K_IMM4L |
| ENUMDOC |
| 4 bit value. |
| |
| ENUM |
| BFD_RELOC_LM32_CALL |
| ENUMX |
| BFD_RELOC_LM32_BRANCH |
| ENUMX |
| BFD_RELOC_LM32_16_GOT |
| ENUMX |
| BFD_RELOC_LM32_GOTOFF_HI16 |
| ENUMX |
| BFD_RELOC_LM32_GOTOFF_LO16 |
| ENUMX |
| BFD_RELOC_LM32_COPY |
| ENUMX |
| BFD_RELOC_LM32_GLOB_DAT |
| ENUMX |
| BFD_RELOC_LM32_JMP_SLOT |
| ENUMX |
| BFD_RELOC_LM32_RELATIVE |
| ENUMDOC |
| Lattice Mico32 relocations. |
| |
| ENUM |
| BFD_RELOC_MACH_O_SECTDIFF |
| ENUMDOC |
| Difference between two section addreses. Must be followed by a |
| BFD_RELOC_MACH_O_PAIR. |
| ENUM |
| BFD_RELOC_MACH_O_LOCAL_SECTDIFF |
| ENUMDOC |
| Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol. |
| ENUM |
| BFD_RELOC_MACH_O_PAIR |
| ENUMDOC |
| Pair of relocation. Contains the first symbol. |
| ENUM |
| BFD_RELOC_MACH_O_SUBTRACTOR32 |
| ENUMDOC |
| Symbol will be substracted. Must be followed by a BFD_RELOC_32. |
| ENUM |
| BFD_RELOC_MACH_O_SUBTRACTOR64 |
| ENUMDOC |
| Symbol will be substracted. Must be followed by a BFD_RELOC_64. |
| |
| ENUM |
| BFD_RELOC_MACH_O_X86_64_BRANCH32 |
| ENUMX |
| BFD_RELOC_MACH_O_X86_64_BRANCH8 |
| ENUMDOC |
| PCREL relocations. They are marked as branch to create PLT entry if |
| required. |
| ENUM |
| BFD_RELOC_MACH_O_X86_64_GOT |
| ENUMDOC |
| Used when referencing a GOT entry. |
| ENUM |
| BFD_RELOC_MACH_O_X86_64_GOT_LOAD |
| ENUMDOC |
| Used when loading a GOT entry with movq. It is specially marked so |
| that the linker could optimize the movq to a leaq if possible. |
| ENUM |
| BFD_RELOC_MACH_O_X86_64_PCREL32_1 |
| ENUMDOC |
| Same as BFD_RELOC_32_PCREL but with an implicit -1 addend. |
| ENUM |
| BFD_RELOC_MACH_O_X86_64_PCREL32_2 |
| ENUMDOC |
| Same as BFD_RELOC_32_PCREL but with an implicit -2 addend. |
| ENUM |
| BFD_RELOC_MACH_O_X86_64_PCREL32_4 |
| ENUMDOC |
| Same as BFD_RELOC_32_PCREL but with an implicit -4 addend. |
| ENUM |
| BFD_RELOC_MACH_O_X86_64_TLV |
| ENUMDOC |
| Used when referencing a TLV entry. |
| |
| |
| ENUM |
| BFD_RELOC_MACH_O_ARM64_ADDEND |
| ENUMDOC |
| Addend for PAGE or PAGEOFF. |
| ENUM |
| BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21 |
| ENUMDOC |
| Relative offset to page of GOT slot. |
| ENUM |
| BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12 |
| ENUMDOC |
| Relative offset within page of GOT slot. |
| ENUM |
| BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT |
| ENUMDOC |
| Address of a GOT entry. |
| |
| ENUM |
| BFD_RELOC_MICROBLAZE_32_LO |
| ENUMDOC |
| This is a 32 bit reloc for the microblaze that stores the low 16 |
| bits of a value. |
| ENUM |
| BFD_RELOC_MICROBLAZE_32_LO_PCREL |
| ENUMDOC |
| This is a 32 bit pc-relative reloc for the microblaze that stores |
| the low 16 bits of a value. |
| ENUM |
| BFD_RELOC_MICROBLAZE_32_ROSDA |
| ENUMDOC |
| This is a 32 bit reloc for the microblaze that stores a value |
| relative to the read-only small data area anchor. |
| ENUM |
| BFD_RELOC_MICROBLAZE_32_RWSDA |
| ENUMDOC |
| This is a 32 bit reloc for the microblaze that stores a value |
| relative to the read-write small data area anchor. |
| ENUM |
| BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM |
| ENUMDOC |
| This is a 32 bit reloc for the microblaze to handle expressions of |
| the form "Symbol Op Symbol". |
| ENUM |
| BFD_RELOC_MICROBLAZE_32_NONE |
| ENUMDOC |
| This is a 32 bit reloc that stores the 32 bit pc relative value in |
| two words (with an imm instruction). No relocation is done here - |
| only used for relaxing. |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_NONE |
| ENUMDOC |
| This is a 64 bit reloc that stores the 32 bit pc relative value in |
| two words (with an imm instruction). No relocation is done here - |
| only used for relaxing. |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_GOTPC |
| ENUMDOC |
| This is a 64 bit reloc that stores the 32 bit pc relative value in |
| two words (with an imm instruction). The relocation is PC-relative |
| GOT offset. |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_GOT |
| ENUMDOC |
| This is a 64 bit reloc that stores the 32 bit pc relative value in |
| two words (with an imm instruction). The relocation is GOT offset. |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_PLT |
| ENUMDOC |
| This is a 64 bit reloc that stores the 32 bit pc relative value in |
| two words (with an imm instruction). The relocation is PC-relative |
| offset into PLT. |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_GOTOFF |
| ENUMDOC |
| This is a 64 bit reloc that stores the 32 bit GOT relative value in |
| two words (with an imm instruction). The relocation is relative |
| offset from _GLOBAL_OFFSET_TABLE_. |
| ENUM |
| BFD_RELOC_MICROBLAZE_32_GOTOFF |
| ENUMDOC |
| This is a 32 bit reloc that stores the 32 bit GOT relative value in |
| a word. The relocation is relative offset from |
| _GLOBAL_OFFSET_TABLE_. |
| ENUM |
| BFD_RELOC_MICROBLAZE_COPY |
| ENUMDOC |
| This is used to tell the dynamic linker to copy the value out of |
| the dynamic object into the runtime process image. |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_TLS |
| ENUMDOC |
| Unused Reloc. |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_TLSGD |
| ENUMDOC |
| This is a 64 bit reloc that stores the 32 bit GOT relative value |
| of the GOT TLS GD info entry in two words (with an imm instruction). |
| The relocation is GOT offset. |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_TLSLD |
| ENUMDOC |
| This is a 64 bit reloc that stores the 32 bit GOT relative value |
| of the GOT TLS LD info entry in two words (with an imm instruction). |
| The relocation is GOT offset. |
| ENUM |
| BFD_RELOC_MICROBLAZE_32_TLSDTPMOD |
| ENUMDOC |
| This is a 32 bit reloc that stores the Module ID to GOT(n). |
| ENUM |
| BFD_RELOC_MICROBLAZE_32_TLSDTPREL |
| ENUMDOC |
| This is a 32 bit reloc that stores TLS offset to GOT(n+1). |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_TLSDTPREL |
| ENUMDOC |
| This is a 32 bit reloc for storing TLS offset to two words (uses imm |
| instruction). |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL |
| ENUMDOC |
| This is a 64 bit reloc that stores 32-bit thread pointer relative |
| offset to two words (uses imm instruction). |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_TLSTPREL |
| ENUMDOC |
| This is a 64 bit reloc that stores 32-bit thread pointer relative |
| offset to two words (uses imm instruction). |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_TEXTPCREL |
| ENUMDOC |
| This is a 64 bit reloc that stores the 32 bit pc relative value in |
| two words (with an imm instruction). The relocation is PC-relative |
| offset from start of TEXT. |
| ENUM |
| BFD_RELOC_MICROBLAZE_64_TEXTREL |
| ENUMDOC |
| This is a 64 bit reloc that stores the 32 bit offset value in two |
| words (with an imm instruction). The relocation is relative offset |
| from start of TEXT. |
| ENUM |
| BFD_RELOC_KVX_RELOC_START |
| ENUMDOC |
| KVX pseudo relocation code to mark the start of the KVX relocation |
| enumerators. N.B. the order of the enumerators is important as |
| several tables in the KVX bfd backend are indexed by these |
| enumerators; make sure they are all synced. |
| ENUM |
| BFD_RELOC_KVX_NONE |
| ENUMDOC |
| KVX null relocation code. |
| ENUM |
| BFD_RELOC_KVX_16 |
| ENUMX |
| BFD_RELOC_KVX_32 |
| ENUMX |
| BFD_RELOC_KVX_64 |
| ENUMX |
| BFD_RELOC_KVX_S16_PCREL |
| ENUMX |
| BFD_RELOC_KVX_PCREL17 |
| ENUMX |
| BFD_RELOC_KVX_PCREL27 |
| ENUMX |
| BFD_RELOC_KVX_32_PCREL |
| ENUMX |
| BFD_RELOC_KVX_S37_PCREL_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_PCREL_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_PCREL_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_PCREL_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_PCREL_EX6 |
| ENUMX |
| BFD_RELOC_KVX_S64_PCREL_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S64_PCREL_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S64_PCREL_EX27 |
| ENUMX |
| BFD_RELOC_KVX_64_PCREL |
| ENUMX |
| BFD_RELOC_KVX_S16 |
| ENUMX |
| BFD_RELOC_KVX_S32_LO5 |
| ENUMX |
| BFD_RELOC_KVX_S32_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S37_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S37_GOTOFF_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_GOTOFF_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_GOTOFF_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_GOTOFF_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_GOTOFF_EX6 |
| ENUMX |
| BFD_RELOC_KVX_32_GOTOFF |
| ENUMX |
| BFD_RELOC_KVX_64_GOTOFF |
| ENUMX |
| BFD_RELOC_KVX_32_GOT |
| ENUMX |
| BFD_RELOC_KVX_S37_GOT_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_GOT_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_GOT_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_GOT_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_GOT_EX6 |
| ENUMX |
| BFD_RELOC_KVX_64_GOT |
| ENUMX |
| BFD_RELOC_KVX_GLOB_DAT |
| ENUMX |
| BFD_RELOC_KVX_COPY |
| ENUMX |
| BFD_RELOC_KVX_JMP_SLOT |
| ENUMX |
| BFD_RELOC_KVX_RELATIVE |
| ENUMX |
| BFD_RELOC_KVX_S43_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_EX6 |
| ENUMX |
| BFD_RELOC_KVX_S64_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S64_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S64_EX27 |
| ENUMX |
| BFD_RELOC_KVX_S37_GOTADDR_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_GOTADDR_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_GOTADDR_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_GOTADDR_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_GOTADDR_EX6 |
| ENUMX |
| BFD_RELOC_KVX_S64_GOTADDR_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S64_GOTADDR_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S64_GOTADDR_EX27 |
| ENUMX |
| BFD_RELOC_KVX_64_DTPMOD |
| ENUMX |
| BFD_RELOC_KVX_64_DTPOFF |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_DTPOFF_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_DTPOFF_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_DTPOFF_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_DTPOFF_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_DTPOFF_EX6 |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_GD_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_GD_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_GD_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_GD_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_GD_EX6 |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_LD_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_LD_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_LD_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_LD_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_LD_EX6 |
| ENUMX |
| BFD_RELOC_KVX_64_TPOFF |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_IE_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_IE_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_IE_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_IE_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_IE_EX6 |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_LE_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S37_TLS_LE_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_LE_LO10 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_LE_UP27 |
| ENUMX |
| BFD_RELOC_KVX_S43_TLS_LE_EX6 |
| ENUMX |
| BFD_RELOC_KVX_8 |
| ENUMDOC |
| KVX Relocations. |
| ENUM |
| BFD_RELOC_KVX_RELOC_END |
| ENUMDOC |
| KVX pseudo relocation code to mark the end of the KVX relocation |
| enumerators that have direct mapping to ELF reloc codes. There are |
| a few more enumerators after this one; those are mainly used by the |
| KVX assembler for the internal fixup or to select one of the above |
| enumerators. |
| ENUM |
| BFD_RELOC_AARCH64_RELOC_START |
| ENUMDOC |
| AArch64 pseudo relocation code to mark the start of the AArch64 |
| relocation enumerators. N.B. the order of the enumerators is |
| important as several tables in the AArch64 bfd backend are indexed |
| by these enumerators; make sure they are all synced. |
| ENUM |
| BFD_RELOC_AARCH64_NULL |
| ENUMDOC |
| Deprecated AArch64 null relocation code. |
| ENUM |
| BFD_RELOC_AARCH64_NONE |
| ENUMDOC |
| AArch64 null relocation code. |
| ENUM |
| BFD_RELOC_AARCH64_64 |
| ENUMX |
| BFD_RELOC_AARCH64_32 |
| ENUMX |
| BFD_RELOC_AARCH64_16 |
| ENUMDOC |
| Basic absolute relocations of N bits. These are equivalent to |
| BFD_RELOC_N and they were added to assist the indexing of the howto |
| table. |
| ENUM |
| BFD_RELOC_AARCH64_64_PCREL |
| ENUMX |
| BFD_RELOC_AARCH64_32_PCREL |
| ENUMX |
| BFD_RELOC_AARCH64_16_PCREL |
| ENUMDOC |
| PC-relative relocations. These are equivalent to BFD_RELOC_N_PCREL |
| and they were added to assist the indexing of the howto table. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G0 |
| ENUMDOC |
| AArch64 MOV[NZK] instruction with most significant bits 0 to 15 of |
| an unsigned address/value. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G0_NC |
| ENUMDOC |
| AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of |
| an address/value. No overflow checking. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G1 |
| ENUMDOC |
| AArch64 MOV[NZK] instruction with most significant bits 16 to 31 of |
| an unsigned address/value. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G1_NC |
| ENUMDOC |
| AArch64 MOV[NZK] instruction with less significant bits 16 to 31 of |
| an address/value. No overflow checking. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G2 |
| ENUMDOC |
| AArch64 MOV[NZK] instruction with most significant bits 32 to 47 of |
| an unsigned address/value. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G2_NC |
| ENUMDOC |
| AArch64 MOV[NZK] instruction with less significant bits 32 to 47 of |
| an address/value. No overflow checking. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G3 |
| ENUMDOC |
| AArch64 MOV[NZK] instruction with most signficant bits 48 to 64 of a |
| signed or unsigned address/value. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G0_S |
| ENUMDOC |
| AArch64 MOV[NZ] instruction with most significant bits 0 to 15 of a |
| signed value. Changes instruction to MOVZ or MOVN depending on the |
| value's sign. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G1_S |
| ENUMDOC |
| AArch64 MOV[NZ] instruction with most significant bits 16 to 31 of a |
| signed value. Changes instruction to MOVZ or MOVN depending on the |
| value's sign. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_G2_S |
| ENUMDOC |
| AArch64 MOV[NZ] instruction with most significant bits 32 to 47 of a |
| signed value. Changes instruction to MOVZ or MOVN depending on the |
| value's sign. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_PREL_G0 |
| ENUMDOC |
| AArch64 MOV[NZ] instruction with most significant bits 0 to 15 of a |
| signed value. Changes instruction to MOVZ or MOVN depending on the |
| value's sign. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_PREL_G0_NC |
| ENUMDOC |
| AArch64 MOV[NZ] instruction with most significant bits 0 to 15 of a |
| signed value. Changes instruction to MOVZ or MOVN depending on the |
| value's sign. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_PREL_G1 |
| ENUMDOC |
| AArch64 MOVK instruction with most significant bits 16 to 31 of a |
| signed value. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_PREL_G1_NC |
| ENUMDOC |
| AArch64 MOVK instruction with most significant bits 16 to 31 of a |
| signed value. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_PREL_G2 |
| ENUMDOC |
| AArch64 MOVK instruction with most significant bits 32 to 47 of a |
| signed value. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_PREL_G2_NC |
| ENUMDOC |
| AArch64 MOVK instruction with most significant bits 32 to 47 of a |
| signed value. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_PREL_G3 |
| ENUMDOC |
| AArch64 MOVK instruction with most significant bits 47 to 63 of a |
| signed value. |
| ENUM |
| BFD_RELOC_AARCH64_LD_LO19_PCREL |
| ENUMDOC |
| AArch64 Load Literal instruction, holding a 19 bit pc-relative word |
| offset. The lowest two bits must be zero and are not stored in the |
| instruction, giving a 21 bit signed byte offset. |
| ENUM |
| BFD_RELOC_AARCH64_ADR_LO21_PCREL |
| ENUMDOC |
| AArch64 ADR instruction, holding a simple 21 bit pc-relative byte |
| offset. |
| ENUM |
| BFD_RELOC_AARCH64_ADR_HI21_PCREL |
| ENUMDOC |
| AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page |
| offset, giving a 4KB aligned page base address. |
| ENUM |
| BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL |
| ENUMDOC |
| AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page |
| offset, giving a 4KB aligned page base address, but with no overflow |
| checking. |
| ENUM |
| BFD_RELOC_AARCH64_ADD_LO12 |
| ENUMDOC |
| AArch64 ADD immediate instruction, holding bits 0 to 11 of the |
| address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL. |
| ENUM |
| BFD_RELOC_AARCH64_LDST8_LO12 |
| ENUMDOC |
| AArch64 8-bit load/store instruction, holding bits 0 to 11 of the |
| address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL. |
| ENUM |
| BFD_RELOC_AARCH64_TSTBR14 |
| ENUMDOC |
| AArch64 14 bit pc-relative test bit and branch. |
| The lowest two bits must be zero and are not stored in the |
| instruction, giving a 16 bit signed byte offset. |
| ENUM |
| BFD_RELOC_AARCH64_BRANCH19 |
| ENUMDOC |
| AArch64 19 bit pc-relative conditional branch and compare & branch. |
| The lowest two bits must be zero and are not stored in the |
| instruction, giving a 21 bit signed byte offset. |
| ENUM |
| BFD_RELOC_AARCH64_JUMP26 |
| ENUMDOC |
| AArch64 26 bit pc-relative unconditional branch. |
| The lowest two bits must be zero and are not stored in the |
| instruction, giving a 28 bit signed byte offset. |
| ENUM |
| BFD_RELOC_AARCH64_CALL26 |
| ENUMDOC |
| AArch64 26 bit pc-relative unconditional branch and link. |
| The lowest two bits must be zero and are not stored in the |
| instruction, giving a 28 bit signed byte offset. |
| ENUM |
| BFD_RELOC_AARCH64_LDST16_LO12 |
| ENUMDOC |
| AArch64 16-bit load/store instruction, holding bits 0 to 11 of the |
| address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL. |
| ENUM |
| BFD_RELOC_AARCH64_LDST32_LO12 |
| ENUMDOC |
| AArch64 32-bit load/store instruction, holding bits 0 to 11 of the |
| address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL. |
| ENUM |
| BFD_RELOC_AARCH64_LDST64_LO12 |
| ENUMDOC |
| AArch64 64-bit load/store instruction, holding bits 0 to 11 of the |
| address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL. |
| ENUM |
| BFD_RELOC_AARCH64_LDST128_LO12 |
| ENUMDOC |
| AArch64 128-bit load/store instruction, holding bits 0 to 11 of the |
| address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL. |
| ENUM |
| BFD_RELOC_AARCH64_GOT_LD_PREL19 |
| ENUMDOC |
| AArch64 Load Literal instruction, holding a 19 bit PC relative word |
| offset of the global offset table entry for a symbol. The lowest |
| two bits must be zero and are not stored in the instruction, giving |
| a 21 bit signed byte offset. This relocation type requires signed |
| overflow checking. |
| ENUM |
| BFD_RELOC_AARCH64_ADR_GOT_PAGE |
| ENUMDOC |
| Get to the page base of the global offset table entry for a symbol |
| as part of an ADRP instruction using a 21 bit PC relative value. |
| Used in conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC. |
| ENUM |
| BFD_RELOC_AARCH64_LD64_GOT_LO12_NC |
| ENUMDOC |
| Unsigned 12 bit byte offset for 64 bit load/store from the page of |
| the GOT entry for this symbol. Used in conjunction with |
| BFD_RELOC_AARCH64_ADR_GOT_PAGE. Valid in LP64 ABI only. |
| ENUM |
| BFD_RELOC_AARCH64_LD32_GOT_LO12_NC |
| ENUMDOC |
| Unsigned 12 bit byte offset for 32 bit load/store from the page of |
| the GOT entry for this symbol. Used in conjunction with |
| BFD_RELOC_AARCH64_ADR_GOT_PAGE. Valid in ILP32 ABI only. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC |
| ENUMDOC |
| Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry |
| for this symbol. Valid in LP64 ABI only. |
| ENUM |
| BFD_RELOC_AARCH64_MOVW_GOTOFF_G1 |
| ENUMDOC |
| Unsigned 16 bit byte higher offset for 64 bit load/store from the |
| GOT entry for this symbol. Valid in LP64 ABI only. |
| ENUM |
| BFD_RELOC_AARCH64_LD64_GOTOFF_LO15 |
| ENUMDOC |
| Unsigned 15 bit byte offset for 64 bit load/store from the page of |
| the GOT entry for this symbol. Valid in LP64 ABI only. |
| ENUM |
| BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14 |
| ENUMDOC |
| Scaled 14 bit byte offset to the page base of the global offset |
| table. |
| ENUM |
| BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15 |
| ENUMDOC |
| Scaled 15 bit byte offset to the page base of the global offset |
| table. |
| ENUM |
| BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21 |
| ENUMDOC |
| Get to the page base of the global offset table entry for a symbols |
| tls_index structure as part of an adrp instruction using a 21 bit PC |
| relative value. Used in conjunction with |
| BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC. |
| ENUM |
| BFD_RELOC_AARCH64_TLSGD_ADR_PREL21 |
| ENUMDOC |
| AArch64 TLS General Dynamic. |
| ENUM |
| BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC |
| ENUMDOC |
| Unsigned 12 bit byte offset to global offset table entry for a |
| symbol's tls_index structure. Used in conjunction with |
| BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21. |
| ENUM |
| BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC |
| ENUMDOC |
| AArch64 TLS General Dynamic relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSGD_MOVW_G1 |
| ENUMDOC |
| AArch64 TLS General Dynamic relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21 |
| ENUMDOC |
| AArch64 TLS INITIAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC |
| ENUMDOC |
| AArch64 TLS INITIAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC |
| ENUMDOC |
| AArch64 TLS INITIAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19 |
| ENUMDOC |
| AArch64 TLS INITIAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC |
| ENUMDOC |
| AArch64 TLS INITIAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1 |
| ENUMDOC |
| AArch64 TLS INITIAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12 |
| ENUMDOC |
| bit[23:12] of byte offset to module TLS base address. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12 |
| ENUMDOC |
| Unsigned 12 bit byte offset to module TLS base address. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC |
| ENUMDOC |
| No overflow check version of |
| BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC |
| ENUMDOC |
| Unsigned 12 bit byte offset to global offset table entry for a |
| symbol's tls_index structure. Used in conjunction with |
| BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21 |
| ENUMDOC |
| GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP |
| instruction. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_ADR_PREL21 |
| ENUMDOC |
| GOT entry address for AArch64 TLS Local Dynamic, used with ADR |
| instruction. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12 |
| ENUMDOC |
| bit[11:1] of byte offset to module TLS base address, encoded in ldst |
| instructions. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no |
| overflow check. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12 |
| ENUMDOC |
| bit[11:2] of byte offset to module TLS base address, encoded in ldst |
| instructions. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no |
| overflow check. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12 |
| ENUMDOC |
| bit[11:3] of byte offset to module TLS base address, encoded in ldst |
| instructions. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no |
| overflow check. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12 |
| ENUMDOC |
| bit[11:0] of byte offset to module TLS base address, encoded in ldst |
| instructions. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no |
| overflow check. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0 |
| ENUMDOC |
| bit[15:0] of byte offset to module TLS base address. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC |
| ENUMDOC |
| No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1 |
| ENUMDOC |
| bit[31:16] of byte offset to module TLS base address. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC |
| ENUMDOC |
| No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2 |
| ENUMDOC |
| bit[47:32] of byte offset to module TLS base address. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2 |
| ENUMDOC |
| AArch64 TLS LOCAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1 |
| ENUMDOC |
| AArch64 TLS LOCAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC |
| ENUMDOC |
| AArch64 TLS LOCAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0 |
| ENUMDOC |
| AArch64 TLS LOCAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC |
| ENUMDOC |
| AArch64 TLS LOCAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12 |
| ENUMDOC |
| AArch64 TLS LOCAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12 |
| ENUMDOC |
| AArch64 TLS LOCAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC |
| ENUMDOC |
| AArch64 TLS LOCAL EXEC relocation. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12 |
| ENUMDOC |
| bit[11:1] of byte offset to module TLS base address, encoded in ldst |
| instructions. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12, but no |
| overflow check. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12 |
| ENUMDOC |
| bit[11:2] of byte offset to module TLS base address, encoded in ldst |
| instructions. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12, but no |
| overflow check. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12 |
| ENUMDOC |
| bit[11:3] of byte offset to module TLS base address, encoded in ldst |
| instructions. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12, but no |
| overflow check. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12 |
| ENUMDOC |
| bit[11:0] of byte offset to module TLS base address, encoded in ldst |
| instructions. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12, but no overflow |
| check. |
| ENUM |
| BFD_RELOC_AARCH64_TLSDESC_LD_PREL19 |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21 |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_LD64_LO12 |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_ADD_LO12 |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_OFF_G1 |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_LDR |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_ADD |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC_CALL |
| ENUMDOC |
| AArch64 TLS DESC relocations. |
| ENUM |
| BFD_RELOC_AARCH64_COPY |
| ENUMX |
| BFD_RELOC_AARCH64_GLOB_DAT |
| ENUMX |
| BFD_RELOC_AARCH64_JUMP_SLOT |
| ENUMX |
| BFD_RELOC_AARCH64_RELATIVE |
| ENUMDOC |
| AArch64 DSO relocations. |
| ENUM |
| BFD_RELOC_AARCH64_TLS_DTPMOD |
| ENUMX |
| BFD_RELOC_AARCH64_TLS_DTPREL |
| ENUMX |
| BFD_RELOC_AARCH64_TLS_TPREL |
| ENUMX |
| BFD_RELOC_AARCH64_TLSDESC |
| ENUMDOC |
| AArch64 TLS relocations. |
| ENUM |
| BFD_RELOC_AARCH64_IRELATIVE |
| ENUMDOC |
| AArch64 support for STT_GNU_IFUNC. |
| ENUM |
| BFD_RELOC_AARCH64_RELOC_END |
| ENUMDOC |
| AArch64 pseudo relocation code to mark the end of the AArch64 |
| relocation enumerators that have direct mapping to ELF reloc codes. |
| There are a few more enumerators after this one; those are mainly |
| used by the AArch64 assembler for the internal fixup or to select |
| one of the above enumerators. |
| ENUM |
| BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP |
| ENUMDOC |
| AArch64 pseudo relocation code to be used internally by the AArch64 |
| assembler and not (currently) written to any object files. |
| ENUM |
| BFD_RELOC_AARCH64_LDST_LO12 |
| ENUMDOC |
| AArch64 unspecified load/store instruction, holding bits 0 to 11 of the |
| address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12 |
| ENUMDOC |
| AArch64 pseudo relocation code for TLS local dynamic mode. It's to |
| be used internally by the AArch64 assembler and not (currently) |
| written to any object files. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow |
| check. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12 |
| ENUMDOC |
| AArch64 pseudo relocation code for TLS local exec mode. It's to be |
| used internally by the AArch64 assembler and not (currently) written |
| to any object files. |
| ENUM |
| BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12_NC |
| ENUMDOC |
| Similar to BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12, but no overflow |
| check. |
| ENUM |
| BFD_RELOC_AARCH64_LD_GOT_LO12_NC |
| ENUMDOC |
| AArch64 pseudo relocation code to be used internally by the AArch64 |
| assembler and not (currently) written to any object files. |
| ENUM |
| BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC |
| ENUMDOC |
| AArch64 pseudo relocation code to be used internally by the AArch64 |
| assembler and not (currently) written to any object files. |
| ENUM |
| BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC |
| ENUMDOC |
| AArch64 pseudo relocation code to be used internally by the AArch64 |
| assembler and not (currently) written to any object files. |
| ENUM |
| BFD_RELOC_TILEPRO_COPY |
| ENUMX |
| BFD_RELOC_TILEPRO_GLOB_DAT |
| ENUMX |
| BFD_RELOC_TILEPRO_JMP_SLOT |
| ENUMX |
| BFD_RELOC_TILEPRO_RELATIVE |
| ENUMX |
| BFD_RELOC_TILEPRO_BROFF_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_JOFFLONG_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM8_X0 |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM8_Y0 |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM8_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM8_Y1 |
| ENUMX |
| BFD_RELOC_TILEPRO_DEST_IMM8_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_MT_IMM15_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_MF_IMM15_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0 |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_HA |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_HA |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_PCREL |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_PCREL |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_GOT |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_GOT |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA |
| ENUMX |
| BFD_RELOC_TILEPRO_MMSTART_X0 |
| ENUMX |
| BFD_RELOC_TILEPRO_MMEND_X0 |
| ENUMX |
| BFD_RELOC_TILEPRO_MMSTART_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_MMEND_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_SHAMT_X0 |
| ENUMX |
| BFD_RELOC_TILEPRO_SHAMT_X1 |
| ENUMX |
| BFD_RELOC_TILEPRO_SHAMT_Y0 |
| ENUMX |
| BFD_RELOC_TILEPRO_SHAMT_Y1 |
| ENUMX |
| BFD_RELOC_TILEPRO_TLS_GD_CALL |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD |
| ENUMX |
| BFD_RELOC_TILEPRO_TLS_IE_LOAD |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA |
| ENUMX |
| BFD_RELOC_TILEPRO_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_TILEPRO_TLS_DTPOFF32 |
| ENUMX |
| BFD_RELOC_TILEPRO_TLS_TPOFF32 |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA |
| ENUMX |
| BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA |
| ENUMDOC |
| Tilera TILEPro Relocations. |
| ENUM |
| BFD_RELOC_TILEGX_HW0 |
| ENUMX |
| BFD_RELOC_TILEGX_HW1 |
| ENUMX |
| BFD_RELOC_TILEGX_HW2 |
| ENUMX |
| BFD_RELOC_TILEGX_HW3 |
| ENUMX |
| BFD_RELOC_TILEGX_HW0_LAST |
| ENUMX |
| BFD_RELOC_TILEGX_HW1_LAST |
| ENUMX |
| BFD_RELOC_TILEGX_HW2_LAST |
| ENUMX |
| BFD_RELOC_TILEGX_COPY |
| ENUMX |
| BFD_RELOC_TILEGX_GLOB_DAT |
| ENUMX |
| BFD_RELOC_TILEGX_JMP_SLOT |
| ENUMX |
| BFD_RELOC_TILEGX_RELATIVE |
| ENUMX |
| BFD_RELOC_TILEGX_BROFF_X1 |
| ENUMX |
| BFD_RELOC_TILEGX_JUMPOFF_X1 |
| ENUMX |
| BFD_RELOC_TILEGX_JUMPOFF_X1_PLT |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_X0 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_Y0 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_X1 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_Y1 |
| ENUMX |
| BFD_RELOC_TILEGX_DEST_IMM8_X1 |
| ENUMX |
| BFD_RELOC_TILEGX_MT_IMM14_X1 |
| ENUMX |
| BFD_RELOC_TILEGX_MF_IMM14_X1 |
| ENUMX |
| BFD_RELOC_TILEGX_MMSTART_X0 |
| ENUMX |
| BFD_RELOC_TILEGX_MMEND_X0 |
| ENUMX |
| BFD_RELOC_TILEGX_SHAMT_X0 |
| ENUMX |
| BFD_RELOC_TILEGX_SHAMT_X1 |
| ENUMX |
| BFD_RELOC_TILEGX_SHAMT_Y0 |
| ENUMX |
| BFD_RELOC_TILEGX_SHAMT_Y1 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW2 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW2 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW3 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW3 |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE |
| ENUMX |
| BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE |
| ENUMX |
| BFD_RELOC_TILEGX_TLS_DTPMOD64 |
| ENUMX |
| BFD_RELOC_TILEGX_TLS_DTPOFF64 |
| ENUMX |
| BFD_RELOC_TILEGX_TLS_TPOFF64 |
| ENUMX |
| BFD_RELOC_TILEGX_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_TILEGX_TLS_DTPOFF32 |
| ENUMX |
| BFD_RELOC_TILEGX_TLS_TPOFF32 |
| ENUMX |
| BFD_RELOC_TILEGX_TLS_GD_CALL |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD |
| ENUMX |
| BFD_RELOC_TILEGX_TLS_IE_LOAD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD |
| ENUMX |
| BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD |
| ENUMDOC |
| Tilera TILE-Gx Relocations. |
| |
| ENUM |
| BFD_RELOC_BPF_64 |
| ENUMX |
| BFD_RELOC_BPF_DISP32 |
| ENUMX |
| BFD_RELOC_BPF_DISPCALL32 |
| ENUMX |
| BFD_RELOC_BPF_DISP16 |
| ENUMDOC |
| Linux eBPF relocations. |
| |
| ENUM |
| BFD_RELOC_EPIPHANY_SIMM8 |
| ENUMDOC |
| Adapteva EPIPHANY - 8 bit signed pc-relative displacement. |
| ENUM |
| BFD_RELOC_EPIPHANY_SIMM24 |
| ENUMDOC |
| Adapteva EPIPHANY - 24 bit signed pc-relative displacement. |
| ENUM |
| BFD_RELOC_EPIPHANY_HIGH |
| ENUMDOC |
| Adapteva EPIPHANY - 16 most-significant bits of absolute address. |
| ENUM |
| BFD_RELOC_EPIPHANY_LOW |
| ENUMDOC |
| Adapteva EPIPHANY - 16 least-significant bits of absolute address. |
| ENUM |
| BFD_RELOC_EPIPHANY_SIMM11 |
| ENUMDOC |
| Adapteva EPIPHANY - 11 bit signed number - add/sub immediate. |
| ENUM |
| BFD_RELOC_EPIPHANY_IMM11 |
| ENUMDOC |
| Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st |
| displacement). |
| ENUM |
| BFD_RELOC_EPIPHANY_IMM8 |
| ENUMDOC |
| Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction. |
| |
| ENUM |
| BFD_RELOC_VISIUM_HI16 |
| ENUMX |
| BFD_RELOC_VISIUM_LO16 |
| ENUMX |
| BFD_RELOC_VISIUM_IM16 |
| ENUMX |
| BFD_RELOC_VISIUM_REL16 |
| ENUMX |
| BFD_RELOC_VISIUM_HI16_PCREL |
| ENUMX |
| BFD_RELOC_VISIUM_LO16_PCREL |
| ENUMX |
| BFD_RELOC_VISIUM_IM16_PCREL |
| ENUMDOC |
| Visium Relocations. |
| |
| ENUM |
| BFD_RELOC_WASM32_LEB128 |
| ENUMX |
| BFD_RELOC_WASM32_LEB128_GOT |
| ENUMX |
| BFD_RELOC_WASM32_LEB128_GOT_CODE |
| ENUMX |
| BFD_RELOC_WASM32_LEB128_PLT |
| ENUMX |
| BFD_RELOC_WASM32_PLT_INDEX |
| ENUMX |
| BFD_RELOC_WASM32_ABS32_CODE |
| ENUMX |
| BFD_RELOC_WASM32_COPY |
| ENUMX |
| BFD_RELOC_WASM32_CODE_POINTER |
| ENUMX |
| BFD_RELOC_WASM32_INDEX |
| ENUMX |
| BFD_RELOC_WASM32_PLT_SIG |
| ENUMDOC |
| WebAssembly relocations. |
| |
| ENUM |
| BFD_RELOC_CKCORE_NONE |
| ENUMX |
| BFD_RELOC_CKCORE_ADDR32 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM8BY4 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM11BY2 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM4BY2 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL32 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_JSR_IMM11BY2 |
| ENUMX |
| BFD_RELOC_CKCORE_GNU_VTINHERIT |
| ENUMX |
| BFD_RELOC_CKCORE_GNU_VTENTRY |
| ENUMX |
| BFD_RELOC_CKCORE_RELATIVE |
| ENUMX |
| BFD_RELOC_CKCORE_COPY |
| ENUMX |
| BFD_RELOC_CKCORE_GLOB_DAT |
| ENUMX |
| BFD_RELOC_CKCORE_JUMP_SLOT |
| ENUMX |
| BFD_RELOC_CKCORE_GOTOFF |
| ENUMX |
| BFD_RELOC_CKCORE_GOTPC |
| ENUMX |
| BFD_RELOC_CKCORE_GOT32 |
| ENUMX |
| BFD_RELOC_CKCORE_PLT32 |
| ENUMX |
| BFD_RELOC_CKCORE_ADDRGOT |
| ENUMX |
| BFD_RELOC_CKCORE_ADDRPLT |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM26BY2 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM16BY2 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM16BY4 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM10BY2 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM10BY4 |
| ENUMX |
| BFD_RELOC_CKCORE_ADDR_HI16 |
| ENUMX |
| BFD_RELOC_CKCORE_ADDR_LO16 |
| ENUMX |
| BFD_RELOC_CKCORE_GOTPC_HI16 |
| ENUMX |
| BFD_RELOC_CKCORE_GOTPC_LO16 |
| ENUMX |
| BFD_RELOC_CKCORE_GOTOFF_HI16 |
| ENUMX |
| BFD_RELOC_CKCORE_GOTOFF_LO16 |
| ENUMX |
| BFD_RELOC_CKCORE_GOT12 |
| ENUMX |
| BFD_RELOC_CKCORE_GOT_HI16 |
| ENUMX |
| BFD_RELOC_CKCORE_GOT_LO16 |
| ENUMX |
| BFD_RELOC_CKCORE_PLT12 |
| ENUMX |
| BFD_RELOC_CKCORE_PLT_HI16 |
| ENUMX |
| BFD_RELOC_CKCORE_PLT_LO16 |
| ENUMX |
| BFD_RELOC_CKCORE_ADDRGOT_HI16 |
| ENUMX |
| BFD_RELOC_CKCORE_ADDRGOT_LO16 |
| ENUMX |
| BFD_RELOC_CKCORE_ADDRPLT_HI16 |
| ENUMX |
| BFD_RELOC_CKCORE_ADDRPLT_LO16 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_JSR_IMM26BY2 |
| ENUMX |
| BFD_RELOC_CKCORE_TOFFSET_LO16 |
| ENUMX |
| BFD_RELOC_CKCORE_DOFFSET_LO16 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM18BY2 |
| ENUMX |
| BFD_RELOC_CKCORE_DOFFSET_IMM18 |
| ENUMX |
| BFD_RELOC_CKCORE_DOFFSET_IMM18BY2 |
| ENUMX |
| BFD_RELOC_CKCORE_DOFFSET_IMM18BY4 |
| ENUMX |
| BFD_RELOC_CKCORE_GOTOFF_IMM18 |
| ENUMX |
| BFD_RELOC_CKCORE_GOT_IMM18BY4 |
| ENUMX |
| BFD_RELOC_CKCORE_PLT_IMM18BY4 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_IMM7BY4 |
| ENUMX |
| BFD_RELOC_CKCORE_TLS_LE32 |
| ENUMX |
| BFD_RELOC_CKCORE_TLS_IE32 |
| ENUMX |
| BFD_RELOC_CKCORE_TLS_GD32 |
| ENUMX |
| BFD_RELOC_CKCORE_TLS_LDM32 |
| ENUMX |
| BFD_RELOC_CKCORE_TLS_LDO32 |
| ENUMX |
| BFD_RELOC_CKCORE_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_CKCORE_TLS_DTPOFF32 |
| ENUMX |
| BFD_RELOC_CKCORE_TLS_TPOFF32 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_FLRW_IMM8BY4 |
| ENUMX |
| BFD_RELOC_CKCORE_NOJSRI |
| ENUMX |
| BFD_RELOC_CKCORE_CALLGRAPH |
| ENUMX |
| BFD_RELOC_CKCORE_IRELATIVE |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_BLOOP_IMM4BY4 |
| ENUMX |
| BFD_RELOC_CKCORE_PCREL_BLOOP_IMM12BY4 |
| ENUMDOC |
| C-SKY relocations. |
| |
| ENUM |
| BFD_RELOC_S12Z_OPR |
| ENUMDOC |
| S12Z relocations. |
| |
| ENUM |
| BFD_RELOC_LARCH_TLS_DTPMOD32 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_DTPREL32 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_DTPMOD64 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_DTPREL64 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_TPREL32 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_TPREL64 |
| ENUMX |
| BFD_RELOC_LARCH_MARK_LA |
| ENUMX |
| BFD_RELOC_LARCH_MARK_PCREL |
| ENUMX |
| BFD_RELOC_LARCH_SOP_PUSH_PCREL |
| ENUMX |
| BFD_RELOC_LARCH_SOP_PUSH_ABSOLUTE |
| ENUMX |
| BFD_RELOC_LARCH_SOP_PUSH_DUP |
| ENUMX |
| BFD_RELOC_LARCH_SOP_PUSH_GPREL |
| ENUMX |
| BFD_RELOC_LARCH_SOP_PUSH_TLS_TPREL |
| ENUMX |
| BFD_RELOC_LARCH_SOP_PUSH_TLS_GOT |
| ENUMX |
| BFD_RELOC_LARCH_SOP_PUSH_TLS_GD |
| ENUMX |
| BFD_RELOC_LARCH_SOP_PUSH_PLT_PCREL |
| ENUMX |
| BFD_RELOC_LARCH_SOP_ASSERT |
| ENUMX |
| BFD_RELOC_LARCH_SOP_NOT |
| ENUMX |
| BFD_RELOC_LARCH_SOP_SUB |
| ENUMX |
| BFD_RELOC_LARCH_SOP_SL |
| ENUMX |
| BFD_RELOC_LARCH_SOP_SR |
| ENUMX |
| BFD_RELOC_LARCH_SOP_ADD |
| ENUMX |
| BFD_RELOC_LARCH_SOP_AND |
| ENUMX |
| BFD_RELOC_LARCH_SOP_IF_ELSE |
| ENUMX |
| BFD_RELOC_LARCH_SOP_POP_32_S_10_5 |
| ENUMX |
| BFD_RELOC_LARCH_SOP_POP_32_U_10_12 |
| ENUMX |
| BFD_RELOC_LARCH_SOP_POP_32_S_10_12 |
| ENUMX |
| BFD_RELOC_LARCH_SOP_POP_32_S_10_16 |
| ENUMX |
| BFD_RELOC_LARCH_SOP_POP_32_S_10_16_S2 |
| ENUMX |
| BFD_RELOC_LARCH_SOP_POP_32_S_5_20 |
| ENUMX |
| BFD_RELOC_LARCH_SOP_POP_32_S_0_5_10_16_S2 |
| ENUMX |
| BFD_RELOC_LARCH_SOP_POP_32_S_0_10_10_16_S2 |
| ENUMX |
| BFD_RELOC_LARCH_SOP_POP_32_U |
| ENUMX |
| BFD_RELOC_LARCH_ADD8 |
| ENUMX |
| BFD_RELOC_LARCH_ADD16 |
| ENUMX |
| BFD_RELOC_LARCH_ADD24 |
| ENUMX |
| BFD_RELOC_LARCH_ADD32 |
| ENUMX |
| BFD_RELOC_LARCH_ADD64 |
| ENUMX |
| BFD_RELOC_LARCH_SUB8 |
| ENUMX |
| BFD_RELOC_LARCH_SUB16 |
| ENUMX |
| BFD_RELOC_LARCH_SUB24 |
| ENUMX |
| BFD_RELOC_LARCH_SUB32 |
| ENUMX |
| BFD_RELOC_LARCH_SUB64 |
| |
| ENUMX |
| BFD_RELOC_LARCH_B16 |
| ENUMX |
| BFD_RELOC_LARCH_B21 |
| ENUMX |
| BFD_RELOC_LARCH_B26 |
| |
| ENUMX |
| BFD_RELOC_LARCH_ABS_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_ABS_LO12 |
| ENUMX |
| BFD_RELOC_LARCH_ABS64_LO20 |
| ENUMX |
| BFD_RELOC_LARCH_ABS64_HI12 |
| |
| ENUMX |
| BFD_RELOC_LARCH_PCALA_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_PCALA_LO12 |
| ENUMX |
| BFD_RELOC_LARCH_PCALA64_LO20 |
| ENUMX |
| BFD_RELOC_LARCH_PCALA64_HI12 |
| |
| ENUMX |
| BFD_RELOC_LARCH_GOT_PC_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_GOT_PC_LO12 |
| ENUMX |
| BFD_RELOC_LARCH_GOT64_PC_LO20 |
| ENUMX |
| BFD_RELOC_LARCH_GOT64_PC_HI12 |
| ENUMX |
| BFD_RELOC_LARCH_GOT_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_GOT_LO12 |
| ENUMX |
| BFD_RELOC_LARCH_GOT64_LO20 |
| ENUMX |
| BFD_RELOC_LARCH_GOT64_HI12 |
| |
| ENUMX |
| BFD_RELOC_LARCH_TLS_LE_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_LE_LO12 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_LE64_LO20 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_LE64_HI12 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_IE_PC_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_IE_PC_LO12 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_IE64_PC_LO20 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_IE64_PC_HI12 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_IE_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_IE_LO12 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_IE64_LO20 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_IE64_HI12 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_LD_PC_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_LD_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_GD_PC_HI20 |
| ENUMX |
| BFD_RELOC_LARCH_TLS_GD_HI20 |
| |
| ENUMX |
| BFD_RELOC_LARCH_32_PCREL |
| |
| ENUMX |
| BFD_RELOC_LARCH_RELAX |
| |
| ENUMX |
| BFD_RELOC_LARCH_DELETE |
| |
| ENUMX |
| BFD_RELOC_LARCH_ALIGN |
| |
| ENUMX |
| BFD_RELOC_LARCH_PCREL20_S2 |
| |
| ENUMX |
| BFD_RELOC_LARCH_CFA |
| |
| ENUMX |
| BFD_RELOC_LARCH_ADD6 |
| ENUMX |
| BFD_RELOC_LARCH_SUB6 |
| |
| ENUMX |
| BFD_RELOC_LARCH_ADD_ULEB128 |
| ENUMX |
| BFD_RELOC_LARCH_SUB_ULEB128 |
| |
| ENUMX |
| BFD_RELOC_LARCH_64_PCREL |
| |
| ENUMDOC |
| LARCH relocations. |
| |
| ENDSENUM |
| BFD_RELOC_UNUSED |
| |
| CODE_FRAGMENT |
| .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type; |
| . |
| */ |
| |
| /* |
| FUNCTION |
| bfd_reloc_type_lookup |
| bfd_reloc_name_lookup |
| |
| SYNOPSIS |
| reloc_howto_type *bfd_reloc_type_lookup |
| (bfd *abfd, bfd_reloc_code_real_type code); |
| reloc_howto_type *bfd_reloc_name_lookup |
| (bfd *abfd, const char *reloc_name); |
| |
| DESCRIPTION |
| Return a pointer to a howto structure which, when |
| invoked, will perform the relocation @var{code} on data from the |
| architecture noted. |
| */ |
| |
| reloc_howto_type * |
| bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code) |
| { |
| return BFD_SEND (abfd, reloc_type_lookup, (abfd, code)); |
| } |
| |
| reloc_howto_type * |
| bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name) |
| { |
| return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name)); |
| } |
| |
| static reloc_howto_type bfd_howto_32 = |
| HOWTO (0, 00, 4, 32, false, 0, complain_overflow_dont, 0, "VRT32", false, 0xffffffff, 0xffffffff, true); |
| |
| /* |
| INTERNAL_FUNCTION |
| bfd_default_reloc_type_lookup |
| |
| SYNOPSIS |
| reloc_howto_type *bfd_default_reloc_type_lookup |
| (bfd *abfd, bfd_reloc_code_real_type code); |
| |
| DESCRIPTION |
| Provides a default relocation lookup routine for any architecture. |
| */ |
| |
| reloc_howto_type * |
| bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code) |
| { |
| /* Very limited support is provided for relocs in generic targets |
| such as elf32-little. FIXME: Should we always return NULL? */ |
| if (code == BFD_RELOC_CTOR |
| && bfd_arch_bits_per_address (abfd) == 32) |
| return &bfd_howto_32; |
| return NULL; |
| } |
| |
| /* |
| FUNCTION |
| bfd_get_reloc_code_name |
| |
| SYNOPSIS |
| const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code); |
| |
| DESCRIPTION |
| Provides a printable name for the supplied relocation code. |
| Useful mainly for printing error messages. |
| */ |
| |
| const char * |
| bfd_get_reloc_code_name (bfd_reloc_code_real_type code) |
| { |
| if (code > BFD_RELOC_UNUSED) |
| return 0; |
| return bfd_reloc_code_real_names[code]; |
| } |
| |
| /* |
| INTERNAL_FUNCTION |
| bfd_generic_relax_section |
| |
| SYNOPSIS |
| bool bfd_generic_relax_section |
| (bfd *abfd, |
| asection *section, |
| struct bfd_link_info *, |
| bool *); |
| |
| DESCRIPTION |
| Provides default handling for relaxing for back ends which |
| don't do relaxing. |
| */ |
| |
| bool |
| bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED, |
| asection *section ATTRIBUTE_UNUSED, |
| struct bfd_link_info *link_info ATTRIBUTE_UNUSED, |
| bool *again) |
| { |
| if (bfd_link_relocatable (link_info)) |
| (*link_info->callbacks->einfo) |
| (_("%P%F: --relax and -r may not be used together\n")); |
| |
| *again = false; |
| return true; |
| } |
| |
| /* |
| INTERNAL_FUNCTION |
| bfd_generic_gc_sections |
| |
| SYNOPSIS |
| bool bfd_generic_gc_sections |
| (bfd *, struct bfd_link_info *); |
| |
| DESCRIPTION |
| Provides default handling for relaxing for back ends which |
| don't do section gc -- i.e., does nothing. |
| */ |
| |
| bool |
| bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED, |
| struct bfd_link_info *info ATTRIBUTE_UNUSED) |
| { |
| return true; |
| } |
| |
| /* |
| INTERNAL_FUNCTION |
| bfd_generic_lookup_section_flags |
| |
| SYNOPSIS |
| bool bfd_generic_lookup_section_flags |
| (struct bfd_link_info *, struct flag_info *, asection *); |
| |
| DESCRIPTION |
| Provides default handling for section flags lookup |
| -- i.e., does nothing. |
| Returns FALSE if the section should be omitted, otherwise TRUE. |
| */ |
| |
| bool |
| bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED, |
| struct flag_info *flaginfo, |
| asection *section ATTRIBUTE_UNUSED) |
| { |
| if (flaginfo != NULL) |
| { |
| _bfd_error_handler (_("INPUT_SECTION_FLAGS are not supported")); |
| return false; |
| } |
| return true; |
| } |
| |
| /* |
| INTERNAL_FUNCTION |
| bfd_generic_merge_sections |
| |
| SYNOPSIS |
| bool bfd_generic_merge_sections |
| (bfd *, struct bfd_link_info *); |
| |
| DESCRIPTION |
| Provides default handling for SEC_MERGE section merging for back ends |
| which don't have SEC_MERGE support -- i.e., does nothing. |
| */ |
| |
| bool |
| bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED, |
| struct bfd_link_info *link_info ATTRIBUTE_UNUSED) |
| { |
| return true; |
| } |
| |
| /* |
| INTERNAL_FUNCTION |
| bfd_generic_get_relocated_section_contents |
| |
| SYNOPSIS |
| bfd_byte *bfd_generic_get_relocated_section_contents |
| (bfd *abfd, |
| struct bfd_link_info *link_info, |
| struct bfd_link_order *link_order, |
| bfd_byte *data, |
| bool relocatable, |
| asymbol **symbols); |
| |
| DESCRIPTION |
| Provides default handling of relocation effort for back ends |
| which can't be bothered to do it efficiently. |
| */ |
| |
| bfd_byte * |
| bfd_generic_get_relocated_section_contents (bfd *abfd, |
| struct bfd_link_info *link_info, |
| struct bfd_link_order *link_order, |
| bfd_byte *data, |
| bool relocatable, |
| asymbol **symbols) |
| { |
| bfd *input_bfd = link_order->u.indirect.section->owner; |
| asection *input_section = link_order->u.indirect.section; |
| long reloc_size; |
| arelent **reloc_vector; |
| long reloc_count; |
| |
| reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section); |
| if (reloc_size < 0) |
| return NULL; |
| |
| /* Read in the section. */ |
| bfd_byte *orig_data = data; |
| if (!bfd_get_full_section_contents (input_bfd, input_section, &data)) |
| return NULL; |
| |
| if (data == NULL) |
| return NULL; |
| |
| if (reloc_size == 0) |
| return data; |
| |
| reloc_vector = (arelent **) bfd_malloc (reloc_size); |
| if (reloc_vector == NULL) |
| goto error_return; |
| |
| reloc_count = bfd_canonicalize_reloc (input_bfd, |
| input_section, |
| reloc_vector, |
| symbols); |
| if (reloc_count < 0) |
| goto error_return; |
| |
| if (reloc_count > 0) |
| { |
| arelent **parent; |
| |
| for (parent = reloc_vector; *parent != NULL; parent++) |
| { |
| char *error_message = NULL; |
| asymbol *symbol; |
| bfd_reloc_status_type r; |
| |
| symbol = *(*parent)->sym_ptr_ptr; |
| /* PR ld/19628: A specially crafted input file |
| can result in a NULL symbol pointer here. */ |
| if (symbol == NULL) |
| { |
| link_info->callbacks->einfo |
| /* xgettext:c-format */ |
| (_("%X%P: %pB(%pA): error: relocation for offset %V has no value\n"), |
| abfd, input_section, (* parent)->address); |
| goto error_return; |
| } |
| |
| /* Zap reloc field when the symbol is from a discarded |
| section, ignoring any addend. Do the same when called |
| from bfd_simple_get_relocated_section_contents for |
| undefined symbols in debug sections. This is to keep |
| debug info reasonably sane, in particular so that |
| DW_FORM_ref_addr to another file's .debug_info isn't |
| confused with an offset into the current file's |
| .debug_info. */ |
| if ((symbol->section != NULL && discarded_section (symbol->section)) |
| || (symbol->section == bfd_und_section_ptr |
| && (input_section->flags & SEC_DEBUGGING) != 0 |
| && link_info->input_bfds == link_info->output_bfd)) |
| { |
| bfd_vma off; |
| static reloc_howto_type none_howto |
| = HOWTO (0, 0, 0, 0, false, 0, complain_overflow_dont, NULL, |
| "unused", false, 0, 0, false); |
| |
| off = ((*parent)->address |
| * bfd_octets_per_byte (input_bfd, input_section)); |
| _bfd_clear_contents ((*parent)->howto, input_bfd, |
| input_section, data, off); |
| (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr; |
| (*parent)->addend = 0; |
| (*parent)->howto = &none_howto; |
| r = bfd_reloc_ok; |
| } |
| else |
| r = bfd_perform_relocation (input_bfd, |
| *parent, |
| data, |
| input_section, |
| relocatable ? abfd : NULL, |
| &error_message); |
| |
| if (relocatable) |
| { |
| asection *os = input_section->output_section; |
| |
| /* A partial link, so keep the relocs. */ |
| os->orelocation[os->reloc_count] = *parent; |
| os->reloc_count++; |
| } |
| |
| if (r != bfd_reloc_ok) |
| { |
| switch (r) |
| { |
| case bfd_reloc_undefined: |
| (*link_info->callbacks->undefined_symbol) |
| (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr), |
| input_bfd, input_section, (*parent)->address, true); |
| break; |
| case bfd_reloc_dangerous: |
| BFD_ASSERT (error_message != NULL); |
| (*link_info->callbacks->reloc_dangerous) |
| (link_info, error_message, |
| input_bfd, input_section, (*parent)->address); |
| break; |
| case bfd_reloc_overflow: |
| (*link_info->callbacks->reloc_overflow) |
| (link_info, NULL, |
| bfd_asymbol_name (*(*parent)->sym_ptr_ptr), |
| (*parent)->howto->name, (*parent)->addend, |
| input_bfd, input_section, (*parent)->address); |
| break; |
| case bfd_reloc_outofrange: |
| /* PR ld/13730: |
| This error can result when processing some partially |
| complete binaries. Do not abort, but issue an error |
| message instead. */ |
| link_info->callbacks->einfo |
| /* xgettext:c-format */ |
| (_("%X%P: %pB(%pA): relocation \"%pR\" goes out of range\n"), |
| abfd, input_section, * parent); |
| goto error_return; |
| |
| case bfd_reloc_notsupported: |
| /* PR ld/17512 |
| This error can result when processing a corrupt binary. |
| Do not abort. Issue an error message instead. */ |
| link_info->callbacks->einfo |
| /* xgettext:c-format */ |
| (_("%X%P: %pB(%pA): relocation \"%pR\" is not supported\n"), |
| abfd, input_section, * parent); |
| goto error_return; |
| |
| default: |
| /* PR 17512; file: 90c2a92e. |
| Report unexpected results, without aborting. */ |
| link_info->callbacks->einfo |
| /* xgettext:c-format */ |
| (_("%X%P: %pB(%pA): relocation \"%pR\" returns an unrecognized value %x\n"), |
| abfd, input_section, * parent, r); |
| break; |
| } |
| |
| } |
| } |
| } |
| |
| free (reloc_vector); |
| return data; |
| |
| error_return: |
| free (reloc_vector); |
| if (orig_data == NULL) |
| free (data); |
| return NULL; |
| } |
| |
| /* |
| INTERNAL_FUNCTION |
| _bfd_generic_set_reloc |
| |
| SYNOPSIS |
| void _bfd_generic_set_reloc |
| (bfd *abfd, |
| sec_ptr section, |
| arelent **relptr, |
| unsigned int count); |
| |
| DESCRIPTION |
| Installs a new set of internal relocations in SECTION. |
| */ |
| |
| void |
| _bfd_generic_set_reloc (bfd *abfd ATTRIBUTE_UNUSED, |
| sec_ptr section, |
| arelent **relptr, |
| unsigned int count) |
| { |
| section->orelocation = relptr; |
| section->reloc_count = count; |
| if (count != 0) |
| section->flags |= SEC_RELOC; |
| else |
| section->flags &= ~SEC_RELOC; |
| } |
| |
| /* |
| INTERNAL_FUNCTION |
| _bfd_unrecognized_reloc |
| |
| SYNOPSIS |
| bool _bfd_unrecognized_reloc |
| (bfd * abfd, |
| sec_ptr section, |
| unsigned int r_type); |
| |
| DESCRIPTION |
| Reports an unrecognized reloc. |
| Written as a function in order to reduce code duplication. |
| Returns FALSE so that it can be called from a return statement. |
| */ |
| |
| bool |
| _bfd_unrecognized_reloc (bfd * abfd, sec_ptr section, unsigned int r_type) |
| { |
| /* xgettext:c-format */ |
| _bfd_error_handler (_("%pB: unrecognized relocation type %#x in section `%pA'"), |
| abfd, r_type, section); |
| |
| /* PR 21803: Suggest the most likely cause of this error. */ |
| _bfd_error_handler (_("is this version of the linker - %s - out of date ?"), |
| BFD_VERSION_STRING); |
| |
| bfd_set_error (bfd_error_bad_value); |
| return false; |
| } |
| |
| reloc_howto_type * |
| _bfd_norelocs_bfd_reloc_type_lookup |
| (bfd *abfd, |
| bfd_reloc_code_real_type code ATTRIBUTE_UNUSED) |
| { |
| return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd); |
| } |
| |
| reloc_howto_type * |
| _bfd_norelocs_bfd_reloc_name_lookup (bfd *abfd, |
| const char *reloc_name ATTRIBUTE_UNUSED) |
| { |
| return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd); |
| } |
| |
| long |
| _bfd_nodynamic_canonicalize_dynamic_reloc (bfd *abfd, |
| arelent **relp ATTRIBUTE_UNUSED, |
| asymbol **symp ATTRIBUTE_UNUSED) |
| { |
| return _bfd_long_bfd_n1_error (abfd); |
| } |
