| # Copyright 1988, 1990-1992, 1994-1995, 1997-2003, 2005-2012 Free |
| # Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| # |
| # test special commands (if, while, etc) |
| # |
| |
| if { [prepare_for_testing commands.exp commands run.c {debug additional_flags=-DFAKEARGV}] } { |
| return -1 |
| } |
| |
| proc gdbvar_simple_if_test {} { |
| global gdb_prompt |
| |
| gdb_test_no_output "set \$foo = 0" "set foo in gdbvar_simple_if_test" |
| # All this test should do is print 0xdeadbeef once. |
| gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1" |
| # All this test should do is print 0xfeedface once. |
| gdb_test "if \$foo == 0\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_if_test #2" |
| } |
| |
| proc gdbvar_simple_while_test {} { |
| global gdb_prompt |
| |
| gdb_test_no_output "set \$foo = 5" "set foo in gdbvar_simple_while_test" |
| # This test should print 0xfeedface five times. |
| gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" \ |
| "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "gdbvar_simple_while_test #1" |
| } |
| |
| proc gdbvar_complex_if_while_test {} { |
| global gdb_prompt |
| |
| gdb_test_no_output "set \$foo = 4" \ |
| "set foo in gdbvar complex_if_while_test" |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "gdbvar_complex_if_while_test #1" |
| } |
| |
| proc progvar_simple_if_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping progvar_simple_if_test because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests; } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test #1" |
| # All this test should do is print 0xdeadbeef once. |
| gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef" \ |
| "progvar_simple_if_test #1" |
| # All this test should do is print 0xfeedface once. |
| gdb_test "if value == 5\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xfeedface" \ |
| "progvar_simple_if_test #2" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc progvar_simple_while_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping progvar_simple_while_test because of noargs." |
| return |
| } |
| |
| gdb_test_no_output "set args 5" "set args in progvar_simple_while_test" |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test #2" |
| # This test should print 0xfeedface five times. |
| gdb_test "while value > 0\np/x 0xfeedface\nset value -= 1\nend" \ |
| "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "progvar_simple_while_test #1" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc progvar_complex_if_while_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping progvar_simple_if_while_test because of noargs." |
| return |
| } |
| |
| gdb_test_no_output "set args 4" \ |
| "set args in progvar_complex_if_while_test" |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=4" ".*" "set value to 4 in progvar_simple_if_test" |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "progvar_complex_if_while_test #1" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc if_while_breakpoint_command_test {} { |
| if [target_info exists noargs] { |
| verbose "Skipping if_while_breakpoint_command_test because of noargs." |
| return |
| } |
| |
| gdb_test_no_output "set args 5" \ |
| "set args in if_while_breakpoint_command_test" |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test" |
| delete_breakpoints |
| gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #1" |
| |
| gdb_test_multiple "commands" \ |
| "commands in if_while_breakpoint_command_test" { |
| -re "End with" { |
| pass "commands in if_while_breakpoint_command_test" |
| } |
| } |
| |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \ |
| "" \ |
| "commands part 2 in if_while_breakpoint_command_test" |
| gdb_test "continue" \ |
| "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "if_while_breakpoint_command_test #1" |
| gdb_test "info break" \ |
| "while.*set.*if.*p/x.*else.*p/x.*end.*" \ |
| "info break in if_while_breakpoint_command_test" |
| gdb_stop_suppressing_tests; |
| } |
| |
| # Test that we can run the inferior from breakpoint commands. |
| # |
| # The expected behavior is that all commands after the first "step" |
| # shall be ignored. See the gdb manual, "Break Commands", |
| # subsection "Breakpoint command lists". |
| |
| proc infrun_breakpoint_command_test {} { |
| if [target_info exists noargs] { |
| verbose "Skipping infrun_breakpoint_command_test because of noargs." |
| return |
| } |
| |
| gdb_test_no_output "set args 6" \ |
| "set args in infrun_breakpoint_command_test" |
| if { ![runto factorial] } then { gdb_suppress_tests } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=6" ".*" "set value to 6 in progvar_simple_if_test #1" |
| delete_breakpoints |
| gdb_test "break factorial if value == 5" "Breakpoint.*at.*" |
| |
| # infrun_breakpoint_command_test - This test was broken into two parts |
| # to get around a synchronization problem in expect. |
| # part1: issue the gdb command "commands" |
| # part2: send the list of commands |
| gdb_test_multiple "commands" \ |
| "commands in infrun_breakpoint_command_test #1" { |
| -re "End with" { |
| pass "commands in infrun_breakpoint_command_test #1" |
| } |
| } |
| gdb_test "step\nstep\nstep\nstep\nend" "" \ |
| "commands in infrun_breakpoint_command_test #2" |
| |
| gdb_test "continue" \ |
| "Continuing.*.*.*Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.*\[0-9\]*\[ \]*if \\(value > 1\\) \{.*\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*" \ |
| "continue in infrun_breakpoint_command_test" |
| |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc breakpoint_command_test {} { |
| if [target_info exists noargs] { |
| verbose "Skipping breakpoint_command_test because of noargs." |
| return |
| } |
| |
| gdb_test_no_output "set args 6" "set args in breakpoint_command_test" |
| if { ![runto factorial] } then { gdb_suppress_tests; } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| gdb_test "p value=6" ".*" "set value to 6 in progvar_simple_if_test #2" |
| delete_breakpoints |
| gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2" |
| gdb_test "commands\nprintf \"Now the value is %d\\n\", value\nend" \ |
| "End with.*" "commands in breakpoint_command_test" |
| gdb_test "continue" \ |
| "Breakpoint \[0-9\]*, factorial.*Now the value is 5" \ |
| "continue in breakpoint_command_test" |
| gdb_test "print value" " = 5" "print value in breakpoint_command_test" |
| gdb_stop_suppressing_tests; |
| } |
| |
| # Test a simple user defined command (with arguments) |
| proc user_defined_command_test {} { |
| global gdb_prompt |
| |
| gdb_test_no_output "set \$foo = 4" \ |
| "set foo in user_defined_command_test" |
| |
| gdb_test_multiple "define mycommand" \ |
| "define mycommand in user_defined_command_test" { |
| -re "End with" { |
| pass "define mycommand in user_defined_command_test" |
| } |
| } |
| |
| # This test should alternate between 0xdeadbeef and 0xfeedface two times. |
| gdb_test "while \$arg0 > 0\nset \$arg0 -= 1\nif \(\$arg0 % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \ |
| "" \ |
| "enter commands in user_defined_command_test" |
| |
| gdb_test "mycommand \$foo" \ |
| "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \ |
| "execute user defined command in user_defined_command_test" |
| gdb_test "show user mycommand" \ |
| " while \\\$arg0.*set.* if \\\(\\\$arg0.*p/x.* else\[^\n\].*p/x.* end\[^\n\].* end\[^\n\].*" \ |
| "display user command in user_defined_command_test" |
| } |
| |
| proc watchpoint_command_test {} { |
| global noargs |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping watchpoint_command_test because of noargs." |
| return |
| } |
| |
| # Disable hardware watchpoints if necessary. |
| if [target_info exists gdb,no_hardware_watchpoints] { |
| gdb_test_no_output "set can-use-hw-watchpoints 0" "" |
| } |
| |
| gdb_test_no_output "set args 6" "set args in watchpoint_command_test" |
| if { ![runto factorial] } then { return } |
| delete_breakpoints |
| |
| # Verify that we can create a watchpoint, and give it a commands |
| # list that continues the inferior. We set the watchpoint on a |
| # local variable, too, so that it self-deletes when the watched |
| # data goes out of scope. |
| # |
| # What should happen is: Each time the watchpoint triggers, it |
| # continues the inferior. Eventually, the watchpoint will self- |
| # delete, when the watched variable is out of scope. But by that |
| # time, the inferior should have exited. GDB shouldn't crash or |
| # anything untoward as a result of this. |
| # |
| set wp_id -1 |
| |
| gdb_test_multiple "watch local_var" "watch local_var" { |
| -re "\[Ww\]atchpoint (\[0-9\]*): local_var.*$gdb_prompt $" { |
| set wp_id $expect_out(1,string) |
| pass "watch local_var" |
| } |
| } |
| |
| if {$wp_id == -1} {return} |
| |
| gdb_test_multiple "commands $wp_id" "begin commands on watch" { |
| -re "Type commands for breakpoint.*, one per line.*>$" { |
| pass "begin commands on watch" |
| } |
| } |
| # See the 'No symbol "value...' fail below. This command will |
| # fail if it's executed in the wrong frame. If adjusting the |
| # test, make sure this property holds. |
| gdb_test_multiple "print value" "add print command to watch" { |
| -re ">$" { |
| pass "add print command to watch" |
| } |
| } |
| gdb_test_multiple "continue" "add continue command to watch" { |
| -re ">$" { |
| pass "add continue command to watch" |
| } |
| } |
| gdb_test "end" \ |
| "" \ |
| "end commands on watch" |
| |
| set test "continue with watch" |
| gdb_test_multiple "continue" "$test" { |
| -re "No symbol \"value\" in current context.\r\n$gdb_prompt $" { |
| # Happens if GDB actually runs the watchpoints commands, |
| # even though the watchpoint was deleted for not being in |
| # scope. |
| fail $test |
| } |
| -re "Continuing.*\[Ww\]atchpoint $wp_id deleted because the program has left the block in.*which its expression is valid.*run.c:(53|77).*$gdb_prompt $" { |
| pass $test |
| } |
| } |
| } |
| |
| proc test_command_prompt_position {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping test_command_prompt_position because of noargs." |
| return |
| } |
| |
| if { ![runto factorial] } then { gdb_suppress_tests; } |
| # Don't depend upon argument passing, since most simulators don't |
| # currently support it. Bash value variable to be what we want. |
| delete_breakpoints |
| gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #3" |
| gdb_test "p value=5" ".*" "set value to 5 in test_command_prompt_position" |
| # All this test should do is print 0xdeadbeef once. |
| gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \ |
| "\\\$\[0-9\]* = 0xdeadbeef" \ |
| "if test in test_command_prompt_position" |
| |
| # Now let's test for the correct position of the '>' in gdb's |
| # prompt for commands. It should be at the beginning of the line, |
| # and not after one space. |
| |
| send_gdb "commands\n" |
| gdb_expect { |
| -re "Type commands.*End with.*\[\r\n\]>$" { |
| send_gdb "printf \"Now the value is %d\\n\", value\n" |
| gdb_expect { |
| -re "^printf.*value\r\n>$" { |
| send_gdb "end\n" |
| gdb_expect { |
| -re "^end\r\n$gdb_prompt $" { |
| pass "> OK in test_command_prompt_position" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "some other message in test_command_prompt_position" |
| } |
| timeout { |
| fail "(timeout) 1 in test_command_prompt_position" |
| } |
| } |
| } |
| -re "^ >$" { fail "> not OK in test_command_prompt_position" } |
| -re ".*$gdb_prompt $" { |
| fail "wrong message in test_command_prompt_position" |
| } |
| timeout { |
| fail "(timeout) 2 in test_command_prompt_position " |
| } |
| } |
| } |
| -re "Type commands.*End with.*\[\r\n\] >$" { |
| fail "prompt not OK in test_command_prompt_position" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "commands in test_command_prompt_position" |
| } |
| timeout { fail "(timeout) 3 commands in test_command_prompt_position" } |
| } |
| |
| gdb_stop_suppressing_tests; |
| } |
| |
| |
| |
| proc deprecated_command_test {} { |
| gdb_test "maintenance deprecate blah" "Can't find command.*" \ |
| "tried to deprecate non-existing command" |
| |
| gdb_test_no_output "maintenance deprecate p \"new_p\"" "maintenance deprecate p \"new_p\" /1/" |
| gdb_test "p 5" \ |
| "Warning: 'p', an alias for the command 'print' is deprecated.*Use 'new_p'.*" \ |
| "p deprecated warning, with replacement" |
| gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /1/" |
| |
| gdb_test_no_output "maintenance deprecate p \"new_p\"" "maintenance deprecate p \"new_p\" /2/" |
| gdb_test_no_output "maintenance deprecate print \"new_print\"" |
| gdb_test "p 5" \ |
| "Warning: command 'print' \\(p\\) is deprecated.*Use 'new_print'.*" \ |
| "both alias and command are deprecated" |
| gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /2/" |
| |
| gdb_test_no_output "maintenance deprecate set remote memory-read-packet-size \"srm\" " \ |
| "deprecate long command /1/" |
| gdb_test "set remote memory-read-packet-size" \ |
| "Warning: command 'set remote memory-read-packet-size' is deprecated.*Use 'srm'.*" \ |
| "long command deprecated /1/" |
| |
| gdb_test_no_output "maintenance deprecate set remote memory-read-packet-size" \ |
| "deprecate long command /2/" |
| gdb_test "set remote memory-read-packet-size" \ |
| "Warning: command 'set remote memory-read-packet-size' is deprecated.*No alternative known.*" \ |
| "long command deprecated with no alternative /2/" |
| |
| gdb_test "maintenance deprecate" \ |
| "\"maintenance deprecate\".*" \ |
| "deprecate with no arguments" |
| } |
| |
| proc bp_deleted_in_command_test {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping bp_deleted_in_command_test because of noargs." |
| return |
| } |
| |
| gdb_test_no_output "set args 1" \ |
| "set args in bp_deleted_in_command_test" |
| delete_breakpoints |
| |
| # Create a breakpoint, and associate a command-list to it, with |
| # one command that deletes this breakpoint. |
| gdb_test "break factorial" \ |
| "Breakpoint \[0-9\]+ at .*: file .*run.c, line \[0-9\]+\." \ |
| "breakpoint in bp_deleted_in_command_test" |
| |
| gdb_test_multiple "commands" "begin commands in bp_deleted_in_command_test" { |
| -re "Type commands for breakpoint.*>$" { |
| pass "begin commands in bp_deleted_in_command_test" |
| } |
| } |
| gdb_test_multiple "silent" "add silent command" { |
| -re ">$" { |
| pass "add silent command" |
| } |
| } |
| gdb_test_multiple "clear factorial" "add clear command" { |
| -re ">$" { |
| pass "add clear command" |
| } |
| } |
| gdb_test_multiple "printf \"factorial command-list executed\\n\"" \ |
| "add printf command" { |
| -re ">$" { |
| pass "add printf command" |
| } |
| } |
| gdb_test_multiple "cont" "add cont command" { |
| -re ">$" { |
| pass "add cont command" |
| } |
| } |
| gdb_test "end" \ |
| "" \ |
| "end commands" |
| |
| gdb_run_cmd |
| gdb_expect { |
| -re ".*factorial command-list executed.*$gdb_prompt $" { |
| pass "run factorial until breakpoint" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "run factorial until breakpoint" |
| } |
| default { fail "(timeout) run factorial until breakpoint" } |
| timeout { fail "(timeout) run factorial until breakpoint" } |
| } |
| } |
| |
| proc temporary_breakpoint_commands {} { |
| global gdb_prompt |
| |
| if [target_info exists noargs] { |
| verbose "Skipping temporary_breakpoint_commands because of noargs." |
| return |
| } |
| |
| gdb_test_no_output "set args 1" \ |
| "set args in temporary_breakpoint_commands" |
| delete_breakpoints |
| |
| # Create a temporary breakpoint, and associate a commands list to it. |
| # This test will verify that this commands list is executed when the |
| # breakpoint is hit. |
| gdb_test "tbreak factorial" \ |
| "Temporary breakpoint \[0-9\]+ at .*: file .*run.c, line \[0-9\]+\." \ |
| "breakpoint in temporary_breakpoint_commands" |
| |
| gdb_test_multiple "commands" \ |
| "begin commands in bp_deleted_in_command_test" { |
| -re "Type commands for breakpoint.*>$" { |
| pass "begin commands in bp_deleted_in_command_test" |
| } |
| } |
| gdb_test_multiple "silent" "add silent tbreak command" { |
| -re ">$" { |
| pass "add silent tbreak command" |
| } |
| } |
| gdb_test_multiple "printf \"factorial tbreak commands executed\\n\"" \ |
| "add printf tbreak command" { |
| -re ">$" { |
| pass "add printf tbreak command" |
| } |
| } |
| gdb_test_multiple "cont" "add cont tbreak command" { |
| -re ">$" { |
| pass "add cont tbreak command" |
| } |
| } |
| gdb_test "end" \ |
| "" \ |
| "end tbreak commands" |
| |
| gdb_run_cmd |
| gdb_expect { |
| -re ".*factorial tbreak commands executed.*$gdb_prompt $" { |
| pass "run factorial until temporary breakpoint" |
| } |
| timeout { fail "(timeout) run factorial until temporary breakpoint" } |
| } |
| } |
| |
| # Test that GDB can handle $arg0 outside of user functions without |
| # crashing. |
| proc stray_arg0_test { } { |
| gdb_test "print \$arg0" \ |
| "\\\$\[0-9\]* = void" \ |
| "stray_arg0_test #1" |
| |
| gdb_test "if 1 == 1\nprint \$arg0\nend" \ |
| "\\\$\[0-9\]* = void" \ |
| "stray_arg0_test #2" |
| |
| gdb_test "print \$arg0 = 1" \ |
| "\\\$\[0-9\]* = 1" \ |
| "stray_arg0_test #3" |
| |
| gdb_test "print \$arg0" \ |
| "\\\$\[0-9\]* = 1" \ |
| "stray_arg0_test #4" |
| } |
| |
| # Test that GDB is able to source a file with an indented comment. |
| proc source_file_with_indented_comment {} { |
| set fd [open "file1" w] |
| puts $fd \ |
| {define my_fun |
| #indented comment |
| end |
| echo Done!\n} |
| close $fd |
| |
| gdb_test "source file1" "Done!" "source file with indented comment" |
| } |
| |
| # Test that GDB can handle arguments when sourcing files recursively. |
| # If the arguments are overwritten with ####### then the test has failed. |
| proc recursive_source_test {} { |
| set fd [open "file1" w] |
| puts $fd \ |
| {source file2 |
| abcdef qwerty} |
| close $fd |
| |
| set fd [open "file2" w] |
| puts $fd \ |
| {define abcdef |
| echo 1: <<<$arg0>>>\n |
| source file3 |
| echo 2: <<<$arg0>>>\n |
| end} |
| close $fd |
| |
| set fd [open "file3" w] |
| puts $fd \ |
| "echo in file3\\n |
| #################################################################" |
| close $fd |
| |
| gdb_test "source file1" \ |
| "1: <<<qwerty>>>\[\r\n]+in file3\[\r\n]+2: <<<qwerty>>>" \ |
| "recursive source test" |
| |
| file delete file1 |
| file delete file2 |
| file delete file3 |
| } |
| |
| proc gdb_test_no_prompt { command result msg } { |
| global gdb_prompt |
| |
| set msg "$command - $msg" |
| set result "^[string_to_regexp $command]\r\n$result$" |
| gdb_test_multiple $command $msg { |
| -re "$result" { |
| pass $msg |
| return 1 |
| } |
| -re "\r\n *>$" { |
| fail $msg |
| return 0 |
| } |
| } |
| return 0 |
| } |
| |
| proc if_commands_test {} { |
| global gdb_prompt |
| |
| gdb_test_no_output "set \$tem = 1" "set \$tem in if_commands_test" |
| |
| set test "if_commands_test 1" |
| gdb_test_no_prompt "if \$tem == 2" { >} $test |
| gdb_test_no_prompt "break main" { >} $test |
| gdb_test_no_prompt "else" { >} $test |
| gdb_test_no_prompt "break factorial" { >} $test |
| gdb_test_no_prompt "commands" { >} $test |
| gdb_test_no_prompt "silent" { >} $test |
| gdb_test_no_prompt "set \$tem = 3" { >} $test |
| gdb_test_no_prompt "continue" { >} $test |
| gdb_test_multiple "end" "first end - $test" { |
| -re " >\$" { |
| pass "first end - $test" |
| } |
| -re "\r\n>\$" { |
| fail "first end - $test" |
| } |
| } |
| gdb_test_multiple "end" "second end - $test" { |
| -re "Breakpoint \[0-9\]+ at .*: file .*run.c, line \[0-9\]+\.\r\n$gdb_prompt $" { |
| pass "second end - $test" |
| } |
| -re "Undefined command: \"silent\".*$gdb_prompt $" { |
| fail "second end - $test" |
| } |
| } |
| |
| set test "if_commands_test 2" |
| gdb_test_no_prompt "if \$tem == 1" { >} $test |
| gdb_test_no_prompt "break main" { >} $test |
| gdb_test_no_prompt "else" { >} $test |
| gdb_test_no_prompt "break factorial" { >} $test |
| gdb_test_no_prompt "commands" { >} $test |
| gdb_test_no_prompt "silent" { >} $test |
| gdb_test_no_prompt "set \$tem = 3" { >} $test |
| gdb_test_no_prompt "continue" { >} $test |
| gdb_test_multiple "end" "first end - $test" { |
| -re " >\$" { |
| pass "first end - $test" |
| } |
| -re "\r\n>\$" { |
| fail "first end - $test" |
| } |
| } |
| gdb_test_multiple "end" "second end - $test" { |
| -re "Breakpoint \[0-9\]+ at .*: file .*run.c, line \[0-9\]+\.\r\n$gdb_prompt $" { |
| pass "second end - $test" |
| } |
| } |
| } |
| |
| # Verify an error during "commands" commands execution will prevent any other |
| # "commands" from other breakpoints at the same location to be executed. |
| |
| proc error_clears_commands_left {} { |
| set test "hook-stop 1" |
| gdb_test_multiple {define hook-stop} $test { |
| -re "End with a line saying just \"end\"\\.\r\n>$" { |
| pass $test |
| } |
| } |
| set test "hook-stop 1a" |
| gdb_test_multiple {echo hook-stop1\n} $test { |
| -re "\r\n>$" { |
| pass $test |
| } |
| } |
| gdb_test_no_output "end" "hook-stop 1b" |
| |
| delete_breakpoints |
| gdb_breakpoint "main" |
| |
| set test "main commands 1" |
| gdb_test_multiple {commands $bpnum} $test { |
| -re "End with a line saying just \"end\"\\.\r\n>$" { |
| pass $test |
| } |
| } |
| set test "main commands 1a" |
| gdb_test_multiple {echo cmd1\n} $test { |
| -re "\r\n>$" { |
| pass $test |
| } |
| } |
| set test "main commands 1b" |
| gdb_test_multiple {errorcommandxy\n} $test { |
| -re "\r\n>$" { |
| pass $test |
| } |
| } |
| gdb_test_no_output "end" "main commands 1c" |
| |
| gdb_breakpoint "main" |
| set test "main commands 2" |
| gdb_test_multiple {commands $bpnum} $test { |
| -re "End with a line saying just \"end\"\\.\r\n>$" { |
| pass $test |
| } |
| } |
| set test "main commands 2a" |
| gdb_test_multiple {echo cmd2\n} $test { |
| -re "\r\n>$" { |
| pass $test |
| } |
| } |
| set test "main commands 2b" |
| gdb_test_multiple {errorcommandyz\n} $test { |
| -re "\r\n>$" { |
| pass $test |
| } |
| } |
| gdb_test_no_output "end" "main commands 2c" |
| |
| gdb_run_cmd |
| gdb_test "" "hook-stop1\r\n.*\r\ncmd1\r\nUndefined command: \"errorcommandxy\"\\. Try \"help\"\\." "cmd1 error" |
| |
| gdb_test {echo idle\n} "\r\nidle" "no cmd2" |
| } |
| |
| proc redefine_hook_test {} { |
| global gdb_prompt |
| |
| gdb_test "define one\nend" \ |
| "" \ |
| "define one" |
| |
| gdb_test "define hook-one\necho hibob\\n\nend" \ |
| "" \ |
| "define hook-one" |
| |
| gdb_test_multiple "define one" "redefine one" { |
| -re "Redefine command .one.. .y or n. $" { |
| send_gdb "y\n" |
| exp_continue |
| } |
| |
| -re "End with" { |
| pass "define one in redefine_hook_test" |
| } |
| default { |
| fail "(timeout or eof) define one in redefine_hook_test" |
| } |
| } |
| |
| gdb_test "end" \ |
| "" \ |
| "enter commands for one redefinition in redefine_hook_test" |
| |
| gdb_test "one" \ |
| "hibob" \ |
| "execute one command in redefine_hook_test" |
| } |
| |
| proc redefine_backtrace_test {} { |
| global gdb_prompt |
| |
| gdb_test_multiple "define backtrace" "define backtrace" { |
| -re "Really redefine built-in command \"backtrace\"\\? \\(y or n\\) $" { |
| pass "define backtrace" |
| } |
| } |
| |
| gdb_test_multiple "y" "expect response to define backtrace" { |
| -re "End with a line saying just \"end\"\\.\r\n>$" { |
| pass "expect response to define backtrace" |
| } |
| } |
| |
| gdb_test "echo hibob\\n\nend" \ |
| "" \ |
| "enter commands in redefine_backtrace_test" |
| |
| gdb_test "backtrace" \ |
| "hibob" \ |
| "execute backtrace command in redefine_backtrace_test" |
| gdb_test "bt" \ |
| "hibob" \ |
| "execute bt command in redefine_backtrace_test" |
| } |
| |
| gdbvar_simple_if_test |
| gdbvar_simple_while_test |
| gdbvar_complex_if_while_test |
| progvar_simple_if_test |
| progvar_simple_while_test |
| progvar_complex_if_while_test |
| if_while_breakpoint_command_test |
| infrun_breakpoint_command_test |
| breakpoint_command_test |
| user_defined_command_test |
| watchpoint_command_test |
| test_command_prompt_position |
| deprecated_command_test |
| bp_deleted_in_command_test |
| temporary_breakpoint_commands |
| stray_arg0_test |
| source_file_with_indented_comment |
| recursive_source_test |
| if_commands_test |
| error_clears_commands_left |
| redefine_hook_test |
| # This one should come last, as it redefines "backtrace". |
| redefine_backtrace_test |