| # Copyright 1998, 2007, 2008, 2009, 2010, 2011 |
| # Free Software Foundation, Inc. |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| # This file was written by Michael Snyder (msnyder@cygnus.com) |
| |
| load_lib "trace-support.exp"; |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| |
| gdb_exit |
| gdb_start |
| |
| set testfile "actions" |
| set srcfile ${testfile}.c |
| set binfile $objdir/$subdir/actions |
| if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \ |
| executable {debug nowarnings}] != "" } { |
| untested actions.exp |
| return -1 |
| } |
| gdb_reinitialize_dir $srcdir/$subdir |
| |
| # If testing on a remote host, download the source file. |
| # remote_download host $srcdir/$subdir/$srcfile |
| |
| gdb_file_cmd $binfile |
| |
| # define relative source line numbers: |
| # all subsequent line numbers are relative to this first one (baseline) |
| |
| set baseline [gdb_find_recursion_test_baseline $srcfile]; |
| if { $baseline == -1 } then { |
| fail "Could not find gdb_recursion_test function" |
| return; |
| } |
| |
| set testline1 [expr $baseline + 7] |
| |
| # |
| # test actions command |
| # |
| |
| gdb_delete_tracepoints |
| set trcpt1 [gdb_gettpnum gdb_c_test]; |
| set trcpt2 [gdb_gettpnum gdb_asm_test]; |
| set trcpt3 [gdb_gettpnum $testline1]; |
| if { $trcpt1 <= 0 || $trcpt2 <= 0 || $trcpt3 <= 0 } then { |
| fail "setting tracepoints" |
| return; |
| } |
| |
| # 5.1 actions of specified tracepoint |
| |
| gdb_test_multiple "info tracepoints" "5.1a: set three tracepoints, no actions" { |
| -re "Actions for tracepoint \[0-9\]+:.*$gdb_prompt $" { |
| fail "5.1a: testsuite failure (tracepoint already has action)!" |
| } |
| -re "No tracepoints.*$gdb_prompt $" { |
| fail "5.1a: set three tracepoints, no actions (No tracepoints!)" |
| } |
| -re "$gdb_prompt $" { |
| pass "5.1a: set three tracepoints, no actions" |
| } |
| } |
| |
| gdb_trace_setactions "5.1b: set actions for first tracepoint" \ |
| "$trcpt1" \ |
| "collect gdb_char_test" "^$" |
| |
| gdb_test "info tracepoints" \ |
| "Num Type\[ \]+Disp Enb Address\[ \]+What.* |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_char_test. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+" \ |
| "5.1c: verify actions set for first tracepoint" |
| |
| gdb_trace_setactions "5.1d: set actions for second tracepoint" \ |
| "$trcpt2" \ |
| "collect gdb_short_test" "^$" |
| |
| gdb_test "info tracepoints" \ |
| "Num Type\[ \]+Disp Enb Address\[ \]+What.* |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_char_test. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_short_test. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+" \ |
| "5.1e: verify actions set for second tracepoint" |
| |
| gdb_trace_setactions "5.2a: set actions for last (default) tracepoint" \ |
| "" \ |
| "collect gdb_long_test" "^$" |
| |
| gdb_test "info tracepoints" \ |
| "Num Type\[ \]+Disp Enb Address\[ \]+What.* |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_char_test. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_short_test. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_long_test." \ |
| "5.1e: verify actions set for second tracepoint" |
| |
| # 5.3 replace actions set earlier |
| |
| gdb_trace_setactions "5.3a: reset actions for first tracepoint" \ |
| "$trcpt1" \ |
| "collect gdb_struct1_test" "^$" |
| |
| gdb_test "info tracepoints" \ |
| "Num Type\[ \]+Disp Enb Address\[ \]+What.* |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_struct1_test. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_short_test. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_long_test." \ |
| "5.3b: verify actions set for first tracepoint" |
| |
| # |
| # test end command (all by itself) |
| # |
| |
| # 5.4 end outside of context |
| |
| gdb_test "end" "This command cannot be used at the top level." \ |
| "5.4: 'end' command out of context" |
| |
| # 5.5 empty actions (just an end with no other actions) |
| |
| gdb_trace_setactions "5.5a: set empty actions for first tracepoint" \ |
| "$trcpt1" |
| |
| gdb_test_multiple "info tracepoints" "5.5c: verify NO actions for first tracepoint" { |
| -re "No tracepoints.*$gdb_prompt $" { |
| fail "5.5c: verify NO actions for first tracepoint" |
| } |
| -re "Actions for.* $trcpt1:.*$gdb_prompt $" { |
| fail "5.5c: verify NO actions for first tracepoint" |
| } |
| -re "$gdb_prompt $" { |
| pass "5.5c: verify NO actions for first tracepoint" |
| } |
| } |
| |
| # 5.6 actions for invalid tracepoint number |
| |
| gdb_test "actions [expr $trcpt2 + $trcpt3]" \ |
| "No tracepoint number [expr $trcpt2 + $trcpt3]." \ |
| "5.6: actions for invalid tracepoint number" |
| |
| # 5.7 invalid action (other than 'collect', 'while-stepping' or 'end') |
| # "warning: .print gdb_c_test. is not a supported trace.*> $" \ |
| |
| gdb_trace_setactions "5.7: invalid action" \ |
| "$trcpt1" \ |
| "print gdb_c_test" \ |
| "`print gdb_c_test' is not a supported tracepoint action" |
| |
| # 5.8 help actions (collect, while-stepping, end) |
| |
| gdb_test "help actions" \ |
| "Specify the actions to be taken at a tracepoint.*" \ |
| "5.8a: help actions" |
| |
| gdb_test "help collect" \ |
| "Specify one or more data items to be collected at a tracepoint.*" \ |
| "5.8b: help collect" |
| |
| gdb_test "help while-stepping" \ |
| "Specify single-stepping behavior at a tracepoint.*" \ |
| "5.8c: help while-stepping" |
| |
| gdb_test "help end" "Ends a list of commands or actions.*" \ |
| "5.8d: help end" |
| |
| # 5.9 default-collect |
| |
| gdb_test_no_output "set default-collect gdb_char_test, gdb_long_test - 100" \ |
| "5.9a: set default-collect" |
| |
| gdb_test "show default-collect" \ |
| "The list of expressions to collect by default is \"gdb_char_test, gdb_long_test - 100\"..*" \ |
| "5.9b: show default-collect" |
| |
| gdb_test_no_output "set default-collect" \ |
| "5.9c: set default-collect" |
| |
| # 5.10 teval |
| |
| gdb_test "tvariable \$tsv" \ |
| "Trace state variable \\\$tsv created, with initial value 0." \ |
| "Create a trace state variable" |
| |
| gdb_trace_setactions "5.10a: set teval action for first tracepoint" \ |
| "$trcpt1" \ |
| "teval gdb_char_test" "^$" |
| |
| gdb_trace_setactions "5.10a: set teval action for second tracepoint" \ |
| "$trcpt2" \ |
| "teval \$tsv += 1" "^$" |
| |
| gdb_test "info tracepoints" \ |
| "Num Type\[ \]+Disp Enb Address\[ \]+What.* |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_c_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+teval gdb_char_test. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_asm_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+teval \\\$tsv \\\+= 1. |
| \[0-9\]+\[\t \]+tracepoint keep y.* in gdb_recursion_test at .*$srcfile:\[0-9\]+. |
| \[\t \]+collect gdb_long_test." \ |
| "5.10a: verify teval actions set for two tracepoints" |
| |