| /* Generic remote debugging interface for simulators. | |
| Copyright (C) 1993-2016 Free Software Foundation, Inc. | |
| Contributed by Cygnus Support. | |
| Steve Chamberlain (sac@cygnus.com). | |
| This file is part of GDB. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 3 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
| #include "defs.h" | |
| #include "gdb_bfd.h" | |
| #include "inferior.h" | |
| #include "infrun.h" | |
| #include "value.h" | |
| #include <ctype.h> | |
| #include <fcntl.h> | |
| #include <signal.h> | |
| #include <setjmp.h> | |
| #include "terminal.h" | |
| #include "target.h" | |
| #include "gdbcore.h" | |
| #include "gdb/callback.h" | |
| #include "gdb/remote-sim.h" | |
| #include "command.h" | |
| #include "regcache.h" | |
| #include "sim-regno.h" | |
| #include "arch-utils.h" | |
| #include "readline/readline.h" | |
| #include "gdbthread.h" | |
| /* Prototypes */ | |
| extern void _initialize_remote_sim (void); | |
| static void init_callbacks (void); | |
| static void end_callbacks (void); | |
| static int gdb_os_write_stdout (host_callback *, const char *, int); | |
| static void gdb_os_flush_stdout (host_callback *); | |
| static int gdb_os_write_stderr (host_callback *, const char *, int); | |
| static void gdb_os_flush_stderr (host_callback *); | |
| static int gdb_os_poll_quit (host_callback *); | |
| /* printf_filtered is depreciated. */ | |
| static void gdb_os_printf_filtered (host_callback *, const char *, ...); | |
| static void gdb_os_vprintf_filtered (host_callback *, const char *, va_list); | |
| static void gdb_os_evprintf_filtered (host_callback *, const char *, va_list); | |
| static void gdb_os_error (host_callback *, const char *, ...) | |
| ATTRIBUTE_NORETURN; | |
| static void gdbsim_kill (struct target_ops *); | |
| static void gdbsim_load (struct target_ops *self, const char *prog, | |
| int fromtty); | |
| static void gdbsim_open (const char *args, int from_tty); | |
| static void gdbsim_close (struct target_ops *self); | |
| static void gdbsim_detach (struct target_ops *ops, const char *args, | |
| int from_tty); | |
| static void gdbsim_prepare_to_store (struct target_ops *self, | |
| struct regcache *regcache); | |
| static void gdbsim_files_info (struct target_ops *target); | |
| static void gdbsim_mourn_inferior (struct target_ops *target); | |
| static void gdbsim_interrupt (struct target_ops *self, ptid_t ptid); | |
| void simulator_command (char *args, int from_tty); | |
| /* Naming convention: | |
| sim_* are the interface to the simulator (see remote-sim.h). | |
| gdbsim_* are stuff which is internal to gdb. */ | |
| /* Forward data declarations */ | |
| extern struct target_ops gdbsim_ops; | |
| static const struct inferior_data *sim_inferior_data_key; | |
| /* Simulator-specific, per-inferior state. */ | |
| struct sim_inferior_data { | |
| /* Flag which indicates whether or not the program has been loaded. */ | |
| int program_loaded; | |
| /* Simulator descriptor for this inferior. */ | |
| SIM_DESC gdbsim_desc; | |
| /* This is the ptid we use for this particular simulator instance. Its | |
| value is somewhat arbitrary, as the simulator target don't have a | |
| notion of tasks or threads, but we need something non-null to place | |
| in inferior_ptid. For simulators which permit multiple instances, | |
| we also need a unique identifier to use for each inferior. */ | |
| ptid_t remote_sim_ptid; | |
| /* Signal with which to resume. */ | |
| enum gdb_signal resume_siggnal; | |
| /* Flag which indicates whether resume should step or not. */ | |
| int resume_step; | |
| }; | |
| /* Flag indicating the "open" status of this module. It's set to 1 | |
| in gdbsim_open() and 0 in gdbsim_close(). */ | |
| static int gdbsim_is_open = 0; | |
| /* Value of the next pid to allocate for an inferior. As indicated | |
| elsewhere, its initial value is somewhat arbitrary; it's critical | |
| though that it's not zero or negative. */ | |
| static int next_pid; | |
| #define INITIAL_PID 42000 | |
| /* Argument list to pass to sim_open(). It is allocated in gdbsim_open() | |
| and deallocated in gdbsim_close(). The lifetime needs to extend beyond | |
| the call to gdbsim_open() due to the fact that other sim instances other | |
| than the first will be allocated after the gdbsim_open() call. */ | |
| static char **sim_argv = NULL; | |
| /* OS-level callback functions for write, flush, etc. */ | |
| static host_callback gdb_callback; | |
| static int callbacks_initialized = 0; | |
| /* Callback for iterate_over_inferiors. It checks to see if the sim | |
| descriptor passed via ARG is the same as that for the inferior | |
| designated by INF. Return true if so; false otherwise. */ | |
| static int | |
| check_for_duplicate_sim_descriptor (struct inferior *inf, void *arg) | |
| { | |
| struct sim_inferior_data *sim_data; | |
| SIM_DESC new_sim_desc = (SIM_DESC) arg; | |
| sim_data = ((struct sim_inferior_data *) | |
| inferior_data (inf, sim_inferior_data_key)); | |
| return (sim_data != NULL && sim_data->gdbsim_desc == new_sim_desc); | |
| } | |
| /* Flags indicating whether or not a sim instance is needed. One of these | |
| flags should be passed to get_sim_inferior_data(). */ | |
| enum {SIM_INSTANCE_NOT_NEEDED = 0, SIM_INSTANCE_NEEDED = 1}; | |
| /* Obtain pointer to per-inferior simulator data, allocating it if necessary. | |
| Attempt to open the sim if SIM_INSTANCE_NEEDED is true. */ | |
| static struct sim_inferior_data * | |
| get_sim_inferior_data (struct inferior *inf, int sim_instance_needed) | |
| { | |
| SIM_DESC sim_desc = NULL; | |
| struct sim_inferior_data *sim_data | |
| = (struct sim_inferior_data *) inferior_data (inf, sim_inferior_data_key); | |
| /* Try to allocate a new sim instance, if needed. We do this ahead of | |
| a potential allocation of a sim_inferior_data struct in order to | |
| avoid needlessly allocating that struct in the event that the sim | |
| instance allocation fails. */ | |
| if (sim_instance_needed == SIM_INSTANCE_NEEDED | |
| && (sim_data == NULL || sim_data->gdbsim_desc == NULL)) | |
| { | |
| struct inferior *idup; | |
| sim_desc = sim_open (SIM_OPEN_DEBUG, &gdb_callback, exec_bfd, sim_argv); | |
| if (sim_desc == NULL) | |
| error (_("Unable to create simulator instance for inferior %d."), | |
| inf->num); | |
| idup = iterate_over_inferiors (check_for_duplicate_sim_descriptor, | |
| sim_desc); | |
| if (idup != NULL) | |
| { | |
| /* We don't close the descriptor due to the fact that it's | |
| shared with some other inferior. If we were to close it, | |
| that might needlessly muck up the other inferior. Of | |
| course, it's possible that the damage has already been | |
| done... Note that it *will* ultimately be closed during | |
| cleanup of the other inferior. */ | |
| sim_desc = NULL; | |
| error ( | |
| _("Inferior %d and inferior %d would have identical simulator state.\n" | |
| "(This simulator does not support the running of more than one inferior.)"), | |
| inf->num, idup->num); | |
| } | |
| } | |
| if (sim_data == NULL) | |
| { | |
| sim_data = XCNEW(struct sim_inferior_data); | |
| set_inferior_data (inf, sim_inferior_data_key, sim_data); | |
| /* Allocate a ptid for this inferior. */ | |
| sim_data->remote_sim_ptid = ptid_build (next_pid, 0, next_pid); | |
| next_pid++; | |
| /* Initialize the other instance variables. */ | |
| sim_data->program_loaded = 0; | |
| sim_data->gdbsim_desc = sim_desc; | |
| sim_data->resume_siggnal = GDB_SIGNAL_0; | |
| sim_data->resume_step = 0; | |
| } | |
| else if (sim_desc) | |
| { | |
| /* This handles the case where sim_data was allocated prior to | |
| needing a sim instance. */ | |
| sim_data->gdbsim_desc = sim_desc; | |
| } | |
| return sim_data; | |
| } | |
| /* Return pointer to per-inferior simulator data using PTID to find the | |
| inferior in question. Return NULL when no inferior is found or | |
| when ptid has a zero or negative pid component. */ | |
| static struct sim_inferior_data * | |
| get_sim_inferior_data_by_ptid (ptid_t ptid, int sim_instance_needed) | |
| { | |
| struct inferior *inf; | |
| int pid = ptid_get_pid (ptid); | |
| if (pid <= 0) | |
| return NULL; | |
| inf = find_inferior_pid (pid); | |
| if (inf) | |
| return get_sim_inferior_data (inf, sim_instance_needed); | |
| else | |
| return NULL; | |
| } | |
| /* Free the per-inferior simulator data. */ | |
| static void | |
| sim_inferior_data_cleanup (struct inferior *inf, void *data) | |
| { | |
| struct sim_inferior_data *sim_data = (struct sim_inferior_data *) data; | |
| if (sim_data != NULL) | |
| { | |
| if (sim_data->gdbsim_desc) | |
| { | |
| sim_close (sim_data->gdbsim_desc, 0); | |
| sim_data->gdbsim_desc = NULL; | |
| } | |
| xfree (sim_data); | |
| } | |
| } | |
| static void | |
| dump_mem (const gdb_byte *buf, int len) | |
| { | |
| fputs_unfiltered ("\t", gdb_stdlog); | |
| if (len == 8 || len == 4) | |
| { | |
| uint32_t l[2]; | |
| memcpy (l, buf, len); | |
| fprintf_unfiltered (gdb_stdlog, "0x%08x", l[0]); | |
| if (len == 8) | |
| fprintf_unfiltered (gdb_stdlog, " 0x%08x", l[1]); | |
| } | |
| else | |
| { | |
| int i; | |
| for (i = 0; i < len; i++) | |
| fprintf_unfiltered (gdb_stdlog, "0x%02x ", buf[i]); | |
| } | |
| fputs_unfiltered ("\n", gdb_stdlog); | |
| } | |
| /* Initialize gdb_callback. */ | |
| static void | |
| init_callbacks (void) | |
| { | |
| if (!callbacks_initialized) | |
| { | |
| gdb_callback = default_callback; | |
| gdb_callback.init (&gdb_callback); | |
| gdb_callback.write_stdout = gdb_os_write_stdout; | |
| gdb_callback.flush_stdout = gdb_os_flush_stdout; | |
| gdb_callback.write_stderr = gdb_os_write_stderr; | |
| gdb_callback.flush_stderr = gdb_os_flush_stderr; | |
| gdb_callback.printf_filtered = gdb_os_printf_filtered; | |
| gdb_callback.vprintf_filtered = gdb_os_vprintf_filtered; | |
| gdb_callback.evprintf_filtered = gdb_os_evprintf_filtered; | |
| gdb_callback.error = gdb_os_error; | |
| gdb_callback.poll_quit = gdb_os_poll_quit; | |
| gdb_callback.magic = HOST_CALLBACK_MAGIC; | |
| callbacks_initialized = 1; | |
| } | |
| } | |
| /* Release callbacks (free resources used by them). */ | |
| static void | |
| end_callbacks (void) | |
| { | |
| if (callbacks_initialized) | |
| { | |
| gdb_callback.shutdown (&gdb_callback); | |
| callbacks_initialized = 0; | |
| } | |
| } | |
| /* GDB version of os_write_stdout callback. */ | |
| static int | |
| gdb_os_write_stdout (host_callback *p, const char *buf, int len) | |
| { | |
| int i; | |
| char b[2]; | |
| ui_file_write (gdb_stdtarg, buf, len); | |
| return len; | |
| } | |
| /* GDB version of os_flush_stdout callback. */ | |
| static void | |
| gdb_os_flush_stdout (host_callback *p) | |
| { | |
| gdb_flush (gdb_stdtarg); | |
| } | |
| /* GDB version of os_write_stderr callback. */ | |
| static int | |
| gdb_os_write_stderr (host_callback *p, const char *buf, int len) | |
| { | |
| int i; | |
| char b[2]; | |
| for (i = 0; i < len; i++) | |
| { | |
| b[0] = buf[i]; | |
| b[1] = 0; | |
| fputs_unfiltered (b, gdb_stdtargerr); | |
| } | |
| return len; | |
| } | |
| /* GDB version of os_flush_stderr callback. */ | |
| static void | |
| gdb_os_flush_stderr (host_callback *p) | |
| { | |
| gdb_flush (gdb_stdtargerr); | |
| } | |
| /* GDB version of printf_filtered callback. */ | |
| static void | |
| gdb_os_printf_filtered (host_callback * p, const char *format,...) | |
| { | |
| va_list args; | |
| va_start (args, format); | |
| vfprintf_filtered (gdb_stdout, format, args); | |
| va_end (args); | |
| } | |
| /* GDB version of error vprintf_filtered. */ | |
| static void | |
| gdb_os_vprintf_filtered (host_callback * p, const char *format, va_list ap) | |
| { | |
| vfprintf_filtered (gdb_stdout, format, ap); | |
| } | |
| /* GDB version of error evprintf_filtered. */ | |
| static void | |
| gdb_os_evprintf_filtered (host_callback * p, const char *format, va_list ap) | |
| { | |
| vfprintf_filtered (gdb_stderr, format, ap); | |
| } | |
| /* GDB version of error callback. */ | |
| static void | |
| gdb_os_error (host_callback * p, const char *format, ...) | |
| { | |
| va_list args; | |
| va_start (args, format); | |
| verror (format, args); | |
| va_end (args); | |
| } | |
| int | |
| one2one_register_sim_regno (struct gdbarch *gdbarch, int regnum) | |
| { | |
| /* Only makes sense to supply raw registers. */ | |
| gdb_assert (regnum >= 0 && regnum < gdbarch_num_regs (gdbarch)); | |
| return regnum; | |
| } | |
| static void | |
| gdbsim_fetch_register (struct target_ops *ops, | |
| struct regcache *regcache, int regno) | |
| { | |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED); | |
| if (regno == -1) | |
| { | |
| for (regno = 0; regno < gdbarch_num_regs (gdbarch); regno++) | |
| gdbsim_fetch_register (ops, regcache, regno); | |
| return; | |
| } | |
| switch (gdbarch_register_sim_regno (gdbarch, regno)) | |
| { | |
| case LEGACY_SIM_REGNO_IGNORE: | |
| break; | |
| case SIM_REGNO_DOES_NOT_EXIST: | |
| { | |
| /* For moment treat a `does not exist' register the same way | |
| as an ``unavailable'' register. */ | |
| gdb_byte buf[MAX_REGISTER_SIZE]; | |
| int nr_bytes; | |
| memset (buf, 0, MAX_REGISTER_SIZE); | |
| regcache_raw_supply (regcache, regno, buf); | |
| break; | |
| } | |
| default: | |
| { | |
| static int warn_user = 1; | |
| gdb_byte buf[MAX_REGISTER_SIZE]; | |
| int nr_bytes; | |
| gdb_assert (regno >= 0 && regno < gdbarch_num_regs (gdbarch)); | |
| memset (buf, 0, MAX_REGISTER_SIZE); | |
| nr_bytes = sim_fetch_register (sim_data->gdbsim_desc, | |
| gdbarch_register_sim_regno | |
| (gdbarch, regno), | |
| buf, | |
| register_size (gdbarch, regno)); | |
| if (nr_bytes > 0 | |
| && nr_bytes != register_size (gdbarch, regno) && warn_user) | |
| { | |
| fprintf_unfiltered (gdb_stderr, | |
| "Size of register %s (%d/%d) " | |
| "incorrect (%d instead of %d))", | |
| gdbarch_register_name (gdbarch, regno), | |
| regno, | |
| gdbarch_register_sim_regno | |
| (gdbarch, regno), | |
| nr_bytes, register_size (gdbarch, regno)); | |
| warn_user = 0; | |
| } | |
| /* FIXME: cagney/2002-05-27: Should check `nr_bytes == 0' | |
| indicating that GDB and the SIM have different ideas about | |
| which registers are fetchable. */ | |
| /* Else if (nr_bytes < 0): an old simulator, that doesn't | |
| think to return the register size. Just assume all is ok. */ | |
| regcache_raw_supply (regcache, regno, buf); | |
| if (remote_debug) | |
| { | |
| fprintf_unfiltered (gdb_stdlog, | |
| "gdbsim_fetch_register: %d", regno); | |
| /* FIXME: We could print something more intelligible. */ | |
| dump_mem (buf, register_size (gdbarch, regno)); | |
| } | |
| break; | |
| } | |
| } | |
| } | |
| static void | |
| gdbsim_store_register (struct target_ops *ops, | |
| struct regcache *regcache, int regno) | |
| { | |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED); | |
| if (regno == -1) | |
| { | |
| for (regno = 0; regno < gdbarch_num_regs (gdbarch); regno++) | |
| gdbsim_store_register (ops, regcache, regno); | |
| return; | |
| } | |
| else if (gdbarch_register_sim_regno (gdbarch, regno) >= 0) | |
| { | |
| gdb_byte tmp[MAX_REGISTER_SIZE]; | |
| int nr_bytes; | |
| regcache_cooked_read (regcache, regno, tmp); | |
| nr_bytes = sim_store_register (sim_data->gdbsim_desc, | |
| gdbarch_register_sim_regno | |
| (gdbarch, regno), | |
| tmp, register_size (gdbarch, regno)); | |
| if (nr_bytes > 0 && nr_bytes != register_size (gdbarch, regno)) | |
| internal_error (__FILE__, __LINE__, | |
| _("Register size different to expected")); | |
| if (nr_bytes < 0) | |
| internal_error (__FILE__, __LINE__, | |
| _("Register %d not updated"), regno); | |
| if (nr_bytes == 0) | |
| warning (_("Register %s not updated"), | |
| gdbarch_register_name (gdbarch, regno)); | |
| if (remote_debug) | |
| { | |
| fprintf_unfiltered (gdb_stdlog, "gdbsim_store_register: %d", regno); | |
| /* FIXME: We could print something more intelligible. */ | |
| dump_mem (tmp, register_size (gdbarch, regno)); | |
| } | |
| } | |
| } | |
| /* Kill the running program. This may involve closing any open files | |
| and releasing other resources acquired by the simulated program. */ | |
| static void | |
| gdbsim_kill (struct target_ops *ops) | |
| { | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, "gdbsim_kill\n"); | |
| /* There is no need to `kill' running simulator - the simulator is | |
| not running. Mourning it is enough. */ | |
| target_mourn_inferior (inferior_ptid); | |
| } | |
| /* Load an executable file into the target process. This is expected to | |
| not only bring new code into the target process, but also to update | |
| GDB's symbol tables to match. */ | |
| static void | |
| gdbsim_load (struct target_ops *self, const char *args, int fromtty) | |
| { | |
| char **argv; | |
| const char *prog; | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED); | |
| if (args == NULL) | |
| error_no_arg (_("program to load")); | |
| argv = gdb_buildargv (args); | |
| make_cleanup_freeargv (argv); | |
| prog = tilde_expand (argv[0]); | |
| if (argv[1] != NULL) | |
| error (_("GDB sim does not yet support a load offset.")); | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, "gdbsim_load: prog \"%s\"\n", prog); | |
| /* FIXME: We will print two messages on error. | |
| Need error to either not print anything if passed NULL or need | |
| another routine that doesn't take any arguments. */ | |
| if (sim_load (sim_data->gdbsim_desc, prog, NULL, fromtty) == SIM_RC_FAIL) | |
| error (_("unable to load program")); | |
| /* FIXME: If a load command should reset the targets registers then | |
| a call to sim_create_inferior() should go here. */ | |
| sim_data->program_loaded = 1; | |
| } | |
| /* Start an inferior process and set inferior_ptid to its pid. | |
| EXEC_FILE is the file to run. | |
| ARGS is a string containing the arguments to the program. | |
| ENV is the environment vector to pass. Errors reported with error(). | |
| On VxWorks and various standalone systems, we ignore exec_file. */ | |
| /* This is called not only when we first attach, but also when the | |
| user types "run" after having attached. */ | |
| static void | |
| gdbsim_create_inferior (struct target_ops *target, char *exec_file, char *args, | |
| char **env, int from_tty) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED); | |
| int len; | |
| char *arg_buf, **argv; | |
| if (exec_file == 0 || exec_bfd == 0) | |
| warning (_("No executable file specified.")); | |
| if (!sim_data->program_loaded) | |
| warning (_("No program loaded.")); | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "gdbsim_create_inferior: exec_file \"%s\", args \"%s\"\n", | |
| (exec_file ? exec_file : "(NULL)"), | |
| args); | |
| if (ptid_equal (inferior_ptid, sim_data->remote_sim_ptid)) | |
| gdbsim_kill (target); | |
| remove_breakpoints (); | |
| init_wait_for_inferior (); | |
| if (exec_file != NULL) | |
| { | |
| len = strlen (exec_file) + 1 + strlen (args) + 1 + /*slop */ 10; | |
| arg_buf = (char *) alloca (len); | |
| arg_buf[0] = '\0'; | |
| strcat (arg_buf, exec_file); | |
| strcat (arg_buf, " "); | |
| strcat (arg_buf, args); | |
| argv = gdb_buildargv (arg_buf); | |
| make_cleanup_freeargv (argv); | |
| } | |
| else | |
| argv = NULL; | |
| if (!have_inferiors ()) | |
| init_thread_list (); | |
| if (sim_create_inferior (sim_data->gdbsim_desc, exec_bfd, argv, env) | |
| != SIM_RC_OK) | |
| error (_("Unable to create sim inferior.")); | |
| inferior_ptid = sim_data->remote_sim_ptid; | |
| inferior_appeared (current_inferior (), ptid_get_pid (inferior_ptid)); | |
| add_thread_silent (inferior_ptid); | |
| insert_breakpoints (); /* Needed to get correct instruction | |
| in cache. */ | |
| clear_proceed_status (0); | |
| } | |
| /* The open routine takes the rest of the parameters from the command, | |
| and (if successful) pushes a new target onto the stack. | |
| Targets should supply this routine, if only to provide an error message. */ | |
| /* Called when selecting the simulator. E.g. (gdb) target sim name. */ | |
| static void | |
| gdbsim_open (const char *args, int from_tty) | |
| { | |
| int len; | |
| char *arg_buf; | |
| struct sim_inferior_data *sim_data; | |
| const char *sysroot; | |
| SIM_DESC gdbsim_desc; | |
| sysroot = gdb_sysroot; | |
| if (is_target_filename (sysroot)) | |
| sysroot += strlen (TARGET_SYSROOT_PREFIX); | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "gdbsim_open: args \"%s\"\n", args ? args : "(null)"); | |
| /* Ensure that the sim target is not on the target stack. This is | |
| necessary, because if it is on the target stack, the call to | |
| push_target below will invoke sim_close(), thus freeing various | |
| state (including a sim instance) that we allocate prior to | |
| invoking push_target(). We want to delay the push_target() | |
| operation until after we complete those operations which could | |
| error out. */ | |
| if (gdbsim_is_open) | |
| unpush_target (&gdbsim_ops); | |
| len = (7 + 1 /* gdbsim */ | |
| + strlen (" -E little") | |
| + strlen (" --architecture=xxxxxxxxxx") | |
| + strlen (" --sysroot=") + strlen (sysroot) + | |
| + (args ? strlen (args) : 0) | |
| + 50) /* slack */ ; | |
| arg_buf = (char *) alloca (len); | |
| strcpy (arg_buf, "gdbsim"); /* 7 */ | |
| /* Specify the byte order for the target when it is explicitly | |
| specified by the user (not auto detected). */ | |
| switch (selected_byte_order ()) | |
| { | |
| case BFD_ENDIAN_BIG: | |
| strcat (arg_buf, " -E big"); | |
| break; | |
| case BFD_ENDIAN_LITTLE: | |
| strcat (arg_buf, " -E little"); | |
| break; | |
| case BFD_ENDIAN_UNKNOWN: | |
| break; | |
| } | |
| /* Specify the architecture of the target when it has been | |
| explicitly specified */ | |
| if (selected_architecture_name () != NULL) | |
| { | |
| strcat (arg_buf, " --architecture="); | |
| strcat (arg_buf, selected_architecture_name ()); | |
| } | |
| /* Pass along gdb's concept of the sysroot. */ | |
| strcat (arg_buf, " --sysroot="); | |
| strcat (arg_buf, sysroot); | |
| /* finally, any explicit args */ | |
| if (args) | |
| { | |
| strcat (arg_buf, " "); /* 1 */ | |
| strcat (arg_buf, args); | |
| } | |
| sim_argv = gdb_buildargv (arg_buf); | |
| init_callbacks (); | |
| gdbsim_desc = sim_open (SIM_OPEN_DEBUG, &gdb_callback, exec_bfd, sim_argv); | |
| if (gdbsim_desc == 0) | |
| { | |
| freeargv (sim_argv); | |
| sim_argv = NULL; | |
| error (_("unable to create simulator instance")); | |
| } | |
| /* Reset the pid numberings for this batch of sim instances. */ | |
| next_pid = INITIAL_PID; | |
| /* Allocate the inferior data, but do not allocate a sim instance | |
| since we've already just done that. */ | |
| sim_data = get_sim_inferior_data (current_inferior (), | |
| SIM_INSTANCE_NOT_NEEDED); | |
| sim_data->gdbsim_desc = gdbsim_desc; | |
| push_target (&gdbsim_ops); | |
| printf_filtered ("Connected to the simulator.\n"); | |
| /* There's nothing running after "target sim" or "load"; not until | |
| "run". */ | |
| inferior_ptid = null_ptid; | |
| gdbsim_is_open = 1; | |
| } | |
| /* Callback for iterate_over_inferiors. Called (indirectly) by | |
| gdbsim_close(). */ | |
| static int | |
| gdbsim_close_inferior (struct inferior *inf, void *arg) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = (struct sim_inferior_data *) inferior_data (inf, sim_inferior_data_key); | |
| if (sim_data != NULL) | |
| { | |
| ptid_t ptid = sim_data->remote_sim_ptid; | |
| sim_inferior_data_cleanup (inf, sim_data); | |
| set_inferior_data (inf, sim_inferior_data_key, NULL); | |
| /* Having a ptid allocated and stored in remote_sim_ptid does | |
| not mean that a corresponding inferior was ever created. | |
| Thus we need to verify the existence of an inferior using the | |
| pid in question before setting inferior_ptid via | |
| switch_to_thread() or mourning the inferior. */ | |
| if (find_inferior_ptid (ptid) != NULL) | |
| { | |
| switch_to_thread (ptid); | |
| generic_mourn_inferior (); | |
| } | |
| } | |
| return 0; | |
| } | |
| /* Close out all files and local state before this target loses control. */ | |
| static void | |
| gdbsim_close (struct target_ops *self) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NOT_NEEDED); | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, "gdbsim_close\n"); | |
| iterate_over_inferiors (gdbsim_close_inferior, NULL); | |
| if (sim_argv != NULL) | |
| { | |
| freeargv (sim_argv); | |
| sim_argv = NULL; | |
| } | |
| end_callbacks (); | |
| gdbsim_is_open = 0; | |
| } | |
| /* Takes a program previously attached to and detaches it. | |
| The program may resume execution (some targets do, some don't) and will | |
| no longer stop on signals, etc. We better not have left any breakpoints | |
| in the program or it'll die when it hits one. ARGS is arguments | |
| typed by the user (e.g. a signal to send the process). FROM_TTY | |
| says whether to be verbose or not. */ | |
| /* Terminate the open connection to the remote debugger. | |
| Use this when you want to detach and do something else with your gdb. */ | |
| static void | |
| gdbsim_detach (struct target_ops *ops, const char *args, int from_tty) | |
| { | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, "gdbsim_detach: args \"%s\"\n", args); | |
| unpush_target (ops); /* calls gdbsim_close to do the real work */ | |
| if (from_tty) | |
| printf_filtered ("Ending simulator %s debugging\n", target_shortname); | |
| } | |
| /* Resume execution of the target process. STEP says whether to single-step | |
| or to run free; SIGGNAL is the signal value (e.g. SIGINT) to be given | |
| to the target, or zero for no signal. */ | |
| struct resume_data | |
| { | |
| enum gdb_signal siggnal; | |
| int step; | |
| }; | |
| static int | |
| gdbsim_resume_inferior (struct inferior *inf, void *arg) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (inf, SIM_INSTANCE_NOT_NEEDED); | |
| struct resume_data *rd = (struct resume_data *) arg; | |
| if (sim_data) | |
| { | |
| sim_data->resume_siggnal = rd->siggnal; | |
| sim_data->resume_step = rd->step; | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, | |
| _("gdbsim_resume: pid %d, step %d, signal %d\n"), | |
| inf->pid, rd->step, rd->siggnal); | |
| } | |
| /* When called from iterate_over_inferiors, a zero return causes the | |
| iteration process to proceed until there are no more inferiors to | |
| consider. */ | |
| return 0; | |
| } | |
| static void | |
| gdbsim_resume (struct target_ops *ops, | |
| ptid_t ptid, int step, enum gdb_signal siggnal) | |
| { | |
| struct resume_data rd; | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data_by_ptid (ptid, SIM_INSTANCE_NOT_NEEDED); | |
| rd.siggnal = siggnal; | |
| rd.step = step; | |
| /* We don't access any sim_data members within this function. | |
| What's of interest is whether or not the call to | |
| get_sim_inferior_data_by_ptid(), above, is able to obtain a | |
| non-NULL pointer. If it managed to obtain a non-NULL pointer, we | |
| know we have a single inferior to consider. If it's NULL, we | |
| either have multiple inferiors to resume or an error condition. */ | |
| if (sim_data) | |
| gdbsim_resume_inferior (find_inferior_ptid (ptid), &rd); | |
| else if (ptid_equal (ptid, minus_one_ptid)) | |
| iterate_over_inferiors (gdbsim_resume_inferior, &rd); | |
| else | |
| error (_("The program is not being run.")); | |
| } | |
| /* Notify the simulator of an asynchronous request to interrupt. | |
| The simulator shall ensure that the interrupt request is eventually | |
| delivered to the simulator. If the call is made while the | |
| simulator is not running then the interrupt request is processed when | |
| the simulator is next resumed. | |
| For simulators that do not support this operation, just abort. */ | |
| static int | |
| gdbsim_interrupt_inferior (struct inferior *inf, void *arg) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (inf, SIM_INSTANCE_NEEDED); | |
| if (sim_data) | |
| { | |
| if (!sim_stop (sim_data->gdbsim_desc)) | |
| { | |
| quit (); | |
| } | |
| } | |
| /* When called from iterate_over_inferiors, a zero return causes the | |
| iteration process to proceed until there are no more inferiors to | |
| consider. */ | |
| return 0; | |
| } | |
| static void | |
| gdbsim_interrupt (struct target_ops *self, ptid_t ptid) | |
| { | |
| struct sim_inferior_data *sim_data; | |
| if (ptid_equal (ptid, minus_one_ptid)) | |
| { | |
| iterate_over_inferiors (gdbsim_interrupt_inferior, NULL); | |
| } | |
| else | |
| { | |
| struct inferior *inf = find_inferior_ptid (ptid); | |
| if (inf == NULL) | |
| error (_("Can't stop pid %d. No inferior found."), | |
| ptid_get_pid (ptid)); | |
| gdbsim_interrupt_inferior (inf, NULL); | |
| } | |
| } | |
| /* GDB version of os_poll_quit callback. | |
| Taken from gdb/util.c - should be in a library. */ | |
| static int | |
| gdb_os_poll_quit (host_callback *p) | |
| { | |
| if (deprecated_ui_loop_hook != NULL) | |
| deprecated_ui_loop_hook (0); | |
| if (check_quit_flag ()) /* gdb's idea of quit */ | |
| return 1; | |
| return 0; | |
| } | |
| /* Wait for inferior process to do something. Return pid of child, | |
| or -1 in case of error; store status through argument pointer STATUS, | |
| just as `wait' would. */ | |
| static void | |
| gdbsim_cntrl_c (int signo) | |
| { | |
| gdbsim_interrupt (NULL, minus_one_ptid); | |
| } | |
| static ptid_t | |
| gdbsim_wait (struct target_ops *ops, | |
| ptid_t ptid, struct target_waitstatus *status, int options) | |
| { | |
| struct sim_inferior_data *sim_data; | |
| static sighandler_t prev_sigint; | |
| int sigrc = 0; | |
| enum sim_stop reason = sim_running; | |
| /* This target isn't able to (yet) resume more than one inferior at a time. | |
| When ptid is minus_one_ptid, just use the current inferior. If we're | |
| given an explicit pid, we'll try to find it and use that instead. */ | |
| if (ptid_equal (ptid, minus_one_ptid)) | |
| sim_data = get_sim_inferior_data (current_inferior (), | |
| SIM_INSTANCE_NEEDED); | |
| else | |
| { | |
| sim_data = get_sim_inferior_data_by_ptid (ptid, SIM_INSTANCE_NEEDED); | |
| if (sim_data == NULL) | |
| error (_("Unable to wait for pid %d. Inferior not found."), | |
| ptid_get_pid (ptid)); | |
| inferior_ptid = ptid; | |
| } | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, "gdbsim_wait\n"); | |
| #if defined (HAVE_SIGACTION) && defined (SA_RESTART) | |
| { | |
| struct sigaction sa, osa; | |
| sa.sa_handler = gdbsim_cntrl_c; | |
| sigemptyset (&sa.sa_mask); | |
| sa.sa_flags = 0; | |
| sigaction (SIGINT, &sa, &osa); | |
| prev_sigint = osa.sa_handler; | |
| } | |
| #else | |
| prev_sigint = signal (SIGINT, gdbsim_cntrl_c); | |
| #endif | |
| sim_resume (sim_data->gdbsim_desc, sim_data->resume_step, | |
| sim_data->resume_siggnal); | |
| signal (SIGINT, prev_sigint); | |
| sim_data->resume_step = 0; | |
| sim_stop_reason (sim_data->gdbsim_desc, &reason, &sigrc); | |
| switch (reason) | |
| { | |
| case sim_exited: | |
| status->kind = TARGET_WAITKIND_EXITED; | |
| status->value.integer = sigrc; | |
| break; | |
| case sim_stopped: | |
| switch (sigrc) | |
| { | |
| case GDB_SIGNAL_ABRT: | |
| quit (); | |
| break; | |
| case GDB_SIGNAL_INT: | |
| case GDB_SIGNAL_TRAP: | |
| default: | |
| status->kind = TARGET_WAITKIND_STOPPED; | |
| status->value.sig = (enum gdb_signal) sigrc; | |
| break; | |
| } | |
| break; | |
| case sim_signalled: | |
| status->kind = TARGET_WAITKIND_SIGNALLED; | |
| status->value.sig = (enum gdb_signal) sigrc; | |
| break; | |
| case sim_running: | |
| case sim_polling: | |
| /* FIXME: Is this correct? */ | |
| break; | |
| } | |
| return inferior_ptid; | |
| } | |
| /* Get ready to modify the registers array. On machines which store | |
| individual registers, this doesn't need to do anything. On machines | |
| which store all the registers in one fell swoop, this makes sure | |
| that registers contains all the registers from the program being | |
| debugged. */ | |
| static void | |
| gdbsim_prepare_to_store (struct target_ops *self, struct regcache *regcache) | |
| { | |
| /* Do nothing, since we can store individual regs. */ | |
| } | |
| /* Helper for gdbsim_xfer_partial that handles memory transfers. | |
| Arguments are like target_xfer_partial. */ | |
| static enum target_xfer_status | |
| gdbsim_xfer_memory (struct target_ops *target, | |
| gdb_byte *readbuf, const gdb_byte *writebuf, | |
| ULONGEST memaddr, ULONGEST len, ULONGEST *xfered_len) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NOT_NEEDED); | |
| int l; | |
| /* If this target doesn't have memory yet, return 0 causing the | |
| request to be passed to a lower target, hopefully an exec | |
| file. */ | |
| if (!target->to_has_memory (target)) | |
| return TARGET_XFER_EOF; | |
| if (!sim_data->program_loaded) | |
| error (_("No program loaded.")); | |
| /* Note that we obtained the sim_data pointer above using | |
| SIM_INSTANCE_NOT_NEEDED. We do this so that we don't needlessly | |
| allocate a sim instance prior to loading a program. If we | |
| get to this point in the code though, gdbsim_desc should be | |
| non-NULL. (Note that a sim instance is needed in order to load | |
| the program...) */ | |
| gdb_assert (sim_data->gdbsim_desc != NULL); | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, | |
| "gdbsim_xfer_memory: readbuf %s, writebuf %s, " | |
| "memaddr %s, len %s\n", | |
| host_address_to_string (readbuf), | |
| host_address_to_string (writebuf), | |
| paddress (target_gdbarch (), memaddr), | |
| pulongest (len)); | |
| if (writebuf) | |
| { | |
| if (remote_debug && len > 0) | |
| dump_mem (writebuf, len); | |
| l = sim_write (sim_data->gdbsim_desc, memaddr, writebuf, len); | |
| } | |
| else | |
| { | |
| l = sim_read (sim_data->gdbsim_desc, memaddr, readbuf, len); | |
| if (remote_debug && len > 0) | |
| dump_mem (readbuf, len); | |
| } | |
| if (l > 0) | |
| { | |
| *xfered_len = (ULONGEST) l; | |
| return TARGET_XFER_OK; | |
| } | |
| else if (l == 0) | |
| return TARGET_XFER_EOF; | |
| else | |
| return TARGET_XFER_E_IO; | |
| } | |
| /* Target to_xfer_partial implementation. */ | |
| static enum target_xfer_status | |
| gdbsim_xfer_partial (struct target_ops *ops, enum target_object object, | |
| const char *annex, gdb_byte *readbuf, | |
| const gdb_byte *writebuf, ULONGEST offset, ULONGEST len, | |
| ULONGEST *xfered_len) | |
| { | |
| switch (object) | |
| { | |
| case TARGET_OBJECT_MEMORY: | |
| return gdbsim_xfer_memory (ops, readbuf, writebuf, offset, len, | |
| xfered_len); | |
| default: | |
| return TARGET_XFER_E_IO; | |
| } | |
| } | |
| static void | |
| gdbsim_files_info (struct target_ops *target) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED); | |
| const char *file = "nothing"; | |
| if (exec_bfd) | |
| file = bfd_get_filename (exec_bfd); | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, "gdbsim_files_info: file \"%s\"\n", file); | |
| if (exec_bfd) | |
| { | |
| fprintf_unfiltered (gdb_stdlog, "\tAttached to %s running program %s\n", | |
| target_shortname, file); | |
| sim_info (sim_data->gdbsim_desc, 0); | |
| } | |
| } | |
| /* Clear the simulator's notion of what the break points are. */ | |
| static void | |
| gdbsim_mourn_inferior (struct target_ops *target) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NOT_NEEDED); | |
| if (remote_debug) | |
| fprintf_unfiltered (gdb_stdlog, "gdbsim_mourn_inferior:\n"); | |
| remove_breakpoints (); | |
| generic_mourn_inferior (); | |
| delete_thread_silent (sim_data->remote_sim_ptid); | |
| } | |
| /* Pass the command argument through to the simulator verbatim. The | |
| simulator must do any command interpretation work. */ | |
| void | |
| simulator_command (char *args, int from_tty) | |
| { | |
| struct sim_inferior_data *sim_data; | |
| /* We use inferior_data() instead of get_sim_inferior_data() here in | |
| order to avoid attaching a sim_inferior_data struct to an | |
| inferior unnecessarily. The reason we take such care here is due | |
| to the fact that this function, simulator_command(), may be called | |
| even when the sim target is not active. If we were to use | |
| get_sim_inferior_data() here, it is possible that this call would | |
| be made either prior to gdbsim_open() or after gdbsim_close(), | |
| thus allocating memory that would not be garbage collected until | |
| the ultimate destruction of the associated inferior. */ | |
| sim_data = ((struct sim_inferior_data *) | |
| inferior_data (current_inferior (), sim_inferior_data_key)); | |
| if (sim_data == NULL || sim_data->gdbsim_desc == NULL) | |
| { | |
| /* PREVIOUSLY: The user may give a command before the simulator | |
| is opened. [...] (??? assuming of course one wishes to | |
| continue to allow commands to be sent to unopened simulators, | |
| which isn't entirely unreasonable). */ | |
| /* The simulator is a builtin abstraction of a remote target. | |
| Consistent with that model, access to the simulator, via sim | |
| commands, is restricted to the period when the channel to the | |
| simulator is open. */ | |
| error (_("Not connected to the simulator target")); | |
| } | |
| sim_do_command (sim_data->gdbsim_desc, args); | |
| /* Invalidate the register cache, in case the simulator command does | |
| something funny. */ | |
| registers_changed (); | |
| } | |
| static VEC (char_ptr) * | |
| sim_command_completer (struct cmd_list_element *ignore, const char *text, | |
| const char *word) | |
| { | |
| struct sim_inferior_data *sim_data; | |
| char **tmp; | |
| int i; | |
| VEC (char_ptr) *result = NULL; | |
| sim_data = ((struct sim_inferior_data *) | |
| inferior_data (current_inferior (), sim_inferior_data_key)); | |
| if (sim_data == NULL || sim_data->gdbsim_desc == NULL) | |
| return NULL; | |
| tmp = sim_complete_command (sim_data->gdbsim_desc, text, word); | |
| if (tmp == NULL) | |
| return NULL; | |
| /* Transform the array into a VEC, and then free the array. */ | |
| for (i = 0; tmp[i] != NULL; i++) | |
| VEC_safe_push (char_ptr, result, tmp[i]); | |
| xfree (tmp); | |
| return result; | |
| } | |
| /* Check to see if a thread is still alive. */ | |
| static int | |
| gdbsim_thread_alive (struct target_ops *ops, ptid_t ptid) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data_by_ptid (ptid, SIM_INSTANCE_NOT_NEEDED); | |
| if (sim_data == NULL) | |
| return 0; | |
| if (ptid_equal (ptid, sim_data->remote_sim_ptid)) | |
| /* The simulators' task is always alive. */ | |
| return 1; | |
| return 0; | |
| } | |
| /* Convert a thread ID to a string. Returns the string in a static | |
| buffer. */ | |
| static char * | |
| gdbsim_pid_to_str (struct target_ops *ops, ptid_t ptid) | |
| { | |
| return normal_pid_to_str (ptid); | |
| } | |
| /* Simulator memory may be accessed after the program has been loaded. */ | |
| static int | |
| gdbsim_has_all_memory (struct target_ops *ops) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NOT_NEEDED); | |
| if (!sim_data->program_loaded) | |
| return 0; | |
| return 1; | |
| } | |
| static int | |
| gdbsim_has_memory (struct target_ops *ops) | |
| { | |
| struct sim_inferior_data *sim_data | |
| = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NOT_NEEDED); | |
| if (!sim_data->program_loaded) | |
| return 0; | |
| return 1; | |
| } | |
| /* Define the target subroutine names. */ | |
| struct target_ops gdbsim_ops; | |
| static void | |
| init_gdbsim_ops (void) | |
| { | |
| gdbsim_ops.to_shortname = "sim"; | |
| gdbsim_ops.to_longname = "simulator"; | |
| gdbsim_ops.to_doc = "Use the compiled-in simulator."; | |
| gdbsim_ops.to_open = gdbsim_open; | |
| gdbsim_ops.to_close = gdbsim_close; | |
| gdbsim_ops.to_detach = gdbsim_detach; | |
| gdbsim_ops.to_resume = gdbsim_resume; | |
| gdbsim_ops.to_wait = gdbsim_wait; | |
| gdbsim_ops.to_fetch_registers = gdbsim_fetch_register; | |
| gdbsim_ops.to_store_registers = gdbsim_store_register; | |
| gdbsim_ops.to_prepare_to_store = gdbsim_prepare_to_store; | |
| gdbsim_ops.to_xfer_partial = gdbsim_xfer_partial; | |
| gdbsim_ops.to_files_info = gdbsim_files_info; | |
| gdbsim_ops.to_insert_breakpoint = memory_insert_breakpoint; | |
| gdbsim_ops.to_remove_breakpoint = memory_remove_breakpoint; | |
| gdbsim_ops.to_kill = gdbsim_kill; | |
| gdbsim_ops.to_load = gdbsim_load; | |
| gdbsim_ops.to_create_inferior = gdbsim_create_inferior; | |
| gdbsim_ops.to_mourn_inferior = gdbsim_mourn_inferior; | |
| gdbsim_ops.to_interrupt = gdbsim_interrupt; | |
| gdbsim_ops.to_thread_alive = gdbsim_thread_alive; | |
| gdbsim_ops.to_pid_to_str = gdbsim_pid_to_str; | |
| gdbsim_ops.to_stratum = process_stratum; | |
| gdbsim_ops.to_has_all_memory = gdbsim_has_all_memory; | |
| gdbsim_ops.to_has_memory = gdbsim_has_memory; | |
| gdbsim_ops.to_has_stack = default_child_has_stack; | |
| gdbsim_ops.to_has_registers = default_child_has_registers; | |
| gdbsim_ops.to_has_execution = default_child_has_execution; | |
| gdbsim_ops.to_magic = OPS_MAGIC; | |
| } | |
| void | |
| _initialize_remote_sim (void) | |
| { | |
| struct cmd_list_element *c; | |
| init_gdbsim_ops (); | |
| add_target (&gdbsim_ops); | |
| c = add_com ("sim", class_obscure, simulator_command, | |
| _("Send a command to the simulator.")); | |
| set_cmd_completer (c, sim_command_completer); | |
| sim_inferior_data_key | |
| = register_inferior_data_with_cleanup (NULL, sim_inferior_data_cleanup); | |
| } |