| 2021-06-22 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Removed. |
| * aclocal.m4: Removed. |
| * configure: Removed. |
| |
| 2021-06-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-20 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_COMMON): Delete. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-06-20 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-06-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c: Include sim-signal.h. |
| * simops.c: Likewise. |
| |
| 2021-06-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete SIM_AC_OPTION_ENDIAN call. |
| * interp.c (sim_open): Set current_target_byte_order. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-06-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| * config.in: Removed. |
| |
| 2021-06-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT. |
| |
| 2021-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2021-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-05-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Delete. |
| |
| 2021-05-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Define. |
| (struct sim_state): Delete. |
| |
| 2021-05-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * cr16_sim.h: Delete config.h include. |
| * gencode.c: Replace config.h include with defs.h. |
| (write_template): Output defs.h include. |
| (write_opcodes): Likewise. |
| * interp.c: Replace config.h include with defs.h. |
| * simops.c: Include defs.h. |
| |
| 2021-05-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-05-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in: Update path. |
| * cr16_sim.h: Update include path. |
| * interp.c: Likewise. |
| |
| 2021-05-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-05-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_create_inferior): Use BFD_VMA_FMT and drop cast. |
| |
| 2021-05-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-04-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * simops.c: Update includes. |
| * configure, config.in: Rebuild. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * Makefile.in (SIM_EXTRA_DEPS): New variable. |
| (simops.o): Remove. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * configure: Rebuild. |
| |
| 2021-04-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| |
| 2021-04-21 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * configure: Regenerate. |
| |
| 2021-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Use PRIx64 to match mcode type. Skip the |
| current simop when it doesn't match a known hash table. |
| * configure.ac (SIM_AC_OPTION_WARNINGS): Delete call. |
| * configure: Regenerate. |
| |
| 2021-04-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all. |
| |
| 2021-04-02 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-03-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (gencode.o, cr16-opc.o): Call COMPILE_FOR_BUILD. |
| (gencode): Call LINK_FOR_BUILD. |
| |
| 2021-03-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (gencode): Delete $(BUILD_LIB). |
| |
| 2021-02-28 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-02-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-02-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-02-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| * simops.c: Delete HAVE_STRING_H & HAVE_TIME_H. |
| |
| 2021-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * cr16_sim.h (State): Change to an extern. |
| * interp.c (State): Define. |
| |
| 2021-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_WARNINGS): Pass "no". |
| * configure: Regenerate. |
| |
| 2021-01-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2017-09-06 John Baldwin <jhb@FreeBSD.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call. |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_INLINE): Delete call. |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2016-01-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Mark argv const. |
| (sim_create_inferior): Mark argv and env const. |
| |
| 2016-01-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Update sim_parse_args comment. |
| |
| 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete. |
| * configure: Regenerate. |
| |
| 2016-01-02 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to |
| LITTLE. |
| * configure: Regenerate. |
| |
| 2015-12-27 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete sim-hload.o. |
| |
| 2015-12-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-12-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-if.c (cris_option_install): Delete. |
| (sim_open): Call sim_add_option_table. |
| * tconfig.h: Delete sim-module.h include. |
| (MODULE_INSTALL_FN, MODULE_LIST): Delete. |
| |
| 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and |
| sim-stop.o. |
| |
| 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * cr16_sim.h (cr16_callback): Delete. |
| * interp.c (cr16_callback): Delete. |
| (do_run): Delete cr16_callback. Replace |
| cr16_callback->printf_filtered with sim_io_printf. |
| (sim_open): Delete cr16_callback assignment. |
| (step_once, sim_create_inferior): Replace |
| cr16_callback->printf_filtered with sim_io_printf. |
| * simops.c (move_to_cr, trace_input_func, do_trace_output_flush, |
| do_trace_output_finish, trace_output_40, trace_output_32, |
| trace_output_16, trace_output_void, trace_output_flag): Replace |
| cr16_callback->printf_filtered with sim_io_printf and |
| cr16_callback->flush_stdout with sim_io_flush_stdout. |
| (OP_14C_14): Likewise. Rename cr16_callback to cb. |
| |
| 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Add sim-reason.o, sim-resume.o, and |
| sim-stop.o. |
| * cr16_sim.h (struct _state): Delete exe and exception. |
| * interp.c (lookup_hash): Call sim_engine_halt instead of setting |
| State.exception. |
| (do_run): Delete unused s and func variables. |
| (stop_simulator, sim_stop, sim_stop_reason): Delete. |
| (sim_resume): Rename to ... |
| (step_once): ... this. Delete State.exception code and move |
| siggnal checking to sim_engine_run. |
| (sim_engine_run): New function. |
| * simops.c (EXCEPTION): Define. |
| (move_to_cr): Call EXCEPTION instead of setting State.exception. |
| (OP_1_4, OP_18_8, OP_10_10, OP_C0_8, OP_102_14, OP_148_14, OP_D_C, |
| OP_14_D, OP_15_D, OP_2C00_10, OP_16_D, OP_17_D, OP_31E_10, OP_6_10): |
| Likewise. |
| (OP_C_C): Likewise. Call sim_engine_halt instead of setting |
| State.exception. |
| (OP_0_20): Call sim_engine_halt instead of setting State.exception. |
| |
| 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete endian.o. |
| (INCLUDE): Delete endian.c. |
| * configure.ac (SIM_AC_OPTION_ENDIAN): Declare little endian. |
| (SIM_AC_OPTION_ALIGNMENT): release unaligned loads. |
| * configure: Regenerate. |
| * cr16_sim.h (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, |
| IMEM_SEGMENTS, DMEM_SEGMENTS, UMEM_SEGMENTS, cr16_memory, dmem_addr, |
| imem_addr, decode_pc, get_longword, get_word, write_word, |
| write_longword, READ_16): Delete. |
| (struct _state): Delete mem member. |
| (endian.c): Delete include. |
| (SB, RB, SW, RW, SLW): Rewrite to use sim-core functions. |
| (get_longword): New function. |
| (RLW): Rewrite to use get_longword. |
| * endian.c: Delete file. |
| * interp.c (map_memory, sim_size, last_segname, last_from, last_to, |
| IMAP0_OFFSET, DMAP0_OFFSET, DMAP2_SHADDOW, DMAP2_OFFSET, |
| dmap_register, imap_register, sim_cr16_translate_dmap_addr, |
| sim_cr16_translate_imap_addr, sim_cr16_translate_addr, map_memory, |
| xfer_mem, sim_write, sim_read, dmem_addr, imem_addr): Delete. |
| (do_run): Delete iaddr and replace imem_addr/get_longword with RW. |
| (sim_open): Call sim_do_commandf. Delete sim_size call. |
| (sim_resume): Delete iaddr and replace imem_addr/get_longword with |
| RLW. |
| * simops.c (MEMPTR): Rewrite to use sim_core_trans_addr. |
| |
| 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * cr16_sim.h (struct simops): Add SIM_DESC and SIM_CPU to func args. |
| (SET_CREG, SET_HW_CREG, SET_PSR_BIT): Pass sd and cpu to move_to_cr. |
| (dmem_addr, imem_addr, move_to_cr): Add SIM_DESC and SIM_CPU args. |
| (RB, SW, RW, SLW, RLW): Pass sd and cpu to dmem_addr. |
| * endian.c: Change cr16_sim.h include to sim-main.h. |
| * gencode.c: Likewise. Add SIM_DESC and SIM_CPU args to all OPs. |
| * interp.c (lookup_hash, map_memory, do_run, dmap_register, |
| imap_register, sim_cr16_translate_dmap_addr, xfer_mem, |
| sim_cr16_translate_imap_addr, sim_cr16_translate_addr): Add |
| SIM_DESC and SIM_CPU args and adjust all callers. |
| (trace_sd): Delete. |
| (sim_open): Do not assign trace_sd. |
| (sim_resume, sim_create_inferior): Set up cpu from the first one |
| in sd. |
| (cr16_reg_store): Get sim state from cpu. |
| * simops.c (move_to_cr): Add SIM_DESC and SIM_CPU args. |
| (trace_input_func, trace_input, do_trace_output_finish, |
| do_trace_output_finish, trace_output_40, trace_output_32, |
| trace_output_16, trace_output_void, trace_output_flag): Add |
| SIM_DESC arg. |
| (trace_input_func): Likewise. Change trace_sd to sd. |
| (OP_*): Add SIM_DESC and SIM_CPU args to all OP funcs. |
| |
| 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * cr16_sim.h (get_longlong, write_longlong, WRITE_16, READ_64, |
| WRITE_64): Delete. |
| * endian.c (get_longlong, write_longlong): Likewise. |
| |
| 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Add sim-reg.o. |
| * interp.c (cr16_reg_fetch, cr16_reg_store): Add prototypes. |
| (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE. |
| (cr16_extract_unsigned_integer, cr16_store_unsigned_integer): |
| New helper functions. |
| (sim_fetch_register): Rename to ... |
| (cr16_reg_fetch): ... this. Use cr16_store_unsigned_integer |
| to write out the updated register values. |
| (sim_store_register): Rename to ... |
| (cr16_reg_store): ... this. Use cr16_extract_unsigned_integer |
| to read in the updated register values. |
| |
| 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_open): Delete sim_create_inferior call. |
| |
| 2015-11-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_close): Delete. |
| |
| 2015-11-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_cr16_translate_dmap_addr): Mark static. |
| (sim_cr16_translate_imap_addr): Likewise. |
| (sim_cr16_translate_addr): Likewise. |
| |
| 2015-06-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_CPU): Delete. |
| |
| 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (sim_cia): Delete. |
| |
| 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (CIA_GET, CIA_SET): Delete. |
| |
| 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (cr16_pc_get, cr16_pc_set): New functions. |
| (sim_open): Call CPU_PC_FETCH & CPU_PC_STORE for all cpus. |
| |
| 2015-04-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete sim-cpu.o. |
| * sim-main.h (STATE_CPU): Delete. |
| |
| 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-04-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete sim-engine.o. |
| |
| 2015-04-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_set_profile, sim_set_profile_size): Delete. |
| |
| 2015-03-31 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (simops.o): New rule. |
| |
| 2015-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * cr16_sim.h (text, text_start, text_end, prog_bfd): Delete. |
| (SEXT8, SEXT16, SEXT32): Undefine. |
| * interp.c: Delete run-sim.h and cr16_sim.h includes. Include |
| sim-main.h and sim-options.h. |
| (myname, sim_kind, init_text_p, prog_bfd_was_opened_p, prog_bfd, |
| text, text_start, text_end, decode_pc, sim_set_profile, |
| sim_set_profile_size, sim_set_trace, sim_info, sim_set_callbacks, |
| sim_trace, sim_complete_command, sim_do_command, sim_load): Delete. |
| (do_run): Delete prototype. |
| (INLINE): Delete define. |
| (do_run, xfer_mem): Pass in SIM_DESC. Set cr16_callback locally from |
| it. |
| (sim_size): Mark static. |
| (sim_write, sim_read): Pass sd to xfer_mem. |
| (free_state): New function. |
| (trace_sd): Declare global variable. |
| (sim_open): Rewrite to use new common logic. |
| (sim_close): Delete body. |
| (sim_resume): Pass sd to do_run. |
| * Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS): Delete. |
| (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS). |
| * sim-main.h: New file. |
| * simops.c: Change cr16_sim.h include to sim-main.h. |
| (trace_input_func): Rewrite pc checks to use trace_sd. |
| |
| 2015-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK. |
| * interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL, |
| ui_loop_hook_counter, deprecated_ui_loop_hook): Delete. |
| (sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code. |
| |
| 2015-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (old_segment_mapping, ins_type_counters, add_commas, |
| set_dmap_register, set_imap_register, HELD_SPI_IDX, HELD_SPU_IDX, |
| spu_register, spi_register, set_spi_register, set_spu_register): |
| Delete. |
| (sim_cr16_translate_addr): Delete old_segment_mapping handling. |
| (sim_open): Likewise. |
| (sim_info): Delete function body. |
| |
| 2015-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (gencode.o, cr16-opc.o): Add $(WARN_CFLAGS). |
| (gencode): Add $(BUILD_LDFLAGS). |
| * endian.c (get_word, get_longword, get_longlong, write_word, |
| write_longword, write_longlong): Convert old style prototypes. |
| * gencode.c: Include string.h. |
| (write_header): Convert old style prototype and fix printf format. |
| (write_template, write_opcodes): Likewise. |
| (check_opcodes): Mark static void and put behind #if 0. |
| * interp.c: Include inttypes.h and run-sim.h. |
| (add_commas): Delete prototype. |
| (decode_pc): Convert old style prototype. |
| (do_run): Change h->op compare to 0. |
| (add_commas, set_dmap_register, set_imap_register, HELD_SPI_IDX, |
| HELD_SPU_IDX, spu_register, spi_register, set_spi_register, |
| set_spu_register): Wrap in #if 0. |
| (sim_write, sim_read, sim_close, sim_stop, sim_set_callbacks, |
| sim_stop_reason, sim_fetch_register, sim_store_register, |
| sim_do_command): Convert old style prototypes. |
| (sim_create_inferior): Fix pointer cast to use uintptr_t. |
| * simops.c [HAVE_TIME_H]: Include time.h. |
| [HAVE_SYS_TIME_H]: Include sys/time.h. |
| [TARGET_SYS_utime]: Include utime.h. |
| [TARGET_SYS_wait]: Include sys/wait.h. |
| (strrchr): Delete prototype. |
| (cond_stat): Mark static. |
| (trace_input_func): Mark name static. |
| (trace_input_func, trace_output_void, trace_output_flag): Convert old style prototypes. |
| (trace_output_40): Wrap in #if 0. |
| (OP_*): Convert old style prototypes. Move trace_input call below |
| all variable decls. Initialize tmp to 0 when appropriate. |
| |
| 2015-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DSIM_HAVE_ENVIRONMENT. |
| (interp.o, simops.o, endian.o, table.o): Delete rules. |
| * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT, |
| SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and |
| SIM_AC_OPTION_INLINE. |
| * config.in, configure: Regenerate. |
| * interp.c (sim_trace): Define. |
| |
| 2015-03-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_EXTRA_CFLAGS): Add |
| -DSIM_USE_DEPRECATED_RUN_FRONTEND. |
| (SIM_RUN_OBJS): Set to run.o. |
| |
| 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (AC_CHECK_HEADERS): Delete. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2014-08-19 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2014-08-15 Roland McGrath <mcgrathr@google.com> |
| |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| |
| 2014-03-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_do_command): Add const to cmd. |
| |
| 2014-03-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_load): Add const to prog. |
| |
| 2014-03-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2013-09-23 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2013-06-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2013-05-10 Freddie Chopin <freddie_chopin@op.pl> |
| |
| * configure: Rebuild. |
| |
| 2012-08-28 Kaushik Phatak <kaushik.phatak@kpitcummins.com> |
| |
| * cr16_sim.h: Add defines for TRAP handling. |
| * interp.c (sim_complete_command): New stub function. |
| * simops.c: Breakpoint handling code. |
| |
| 2012-06-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c: Include config.h first. Also include stdlib.h and |
| string.h so we can drop the sysdep.h include. |
| |
| 2012-06-15 Joel Brobecker <brobecker@adacore.com> |
| |
| * config.in, configure: Regenerate. |
| |
| 2012-05-24 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/7205 |
| |
| Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. |
| |
| 2012-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2011-12-30 Mike Frysinger <vapier@gentoo.org> |
| |
| PR sim/12862 |
| * simops.c (OP_C_C): Only handle TARGET_SYS_fork, TARGET_SYS_execve, |
| TARGET_SYS_pipe, TARGET_SYS_rename, and TARGET_SYS_chown when they |
| are defined. |
| |
| 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: New file. |
| * configure: Regenerate. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change include to common/acinclude.m4. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER |
| call. Replace common.m4 include with SIM_AC_COMMON. |
| * configure: Regenerate. |
| |
| 2010-04-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_write): Add const to buffer arg. |
| |
| 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure: Regenerate. |
| |
| 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * config.in: Regenerate. |
| * configure: Likewise. |
| |
| * configure: Regenerate. |
| |
| 2008-07-11 Hans-Peter Nilsson <hp@axis.com> |
| |
| * configure: Regenerate to track ../common/common.m4 changes. |
| * config.in: Ditto. |
| |
| * interp.c (hash): Remove incorrect prototype. |
| |
| 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| Joseph Myers <joseph@codesourcery.com> |
| |
| * configure: Regenerate. |
| |
| 2008-05-02 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com> |
| |
| * interp.c: Update the machine code decode algorithm using hash table. |
| * Makefile.in, cr16_sim.h, gencode.c and simops.c: Update for typos |
| and coding standards. |
| |
| 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com> |
| |
| * ChangeLog, Makefile.in, configure, configure.in, cr16_sim.h, |
| gencode.c, interp.c, simops.c, endian.c: Created. |
