| 2014-12-27 Anthony Green <green@moxielogic.com |
| |
| * config/tc-moxie.c (md_assemble): ldo/sto instructions now use a |
| 16 bit offset instead of 32. |
| |
| 2014-12-25 Yaakov Selkowitz <yselkowi@redhat.com> |
| |
| PR gas/17753 |
| * config/tc-mep.c (md_begin): Specify types of vararg literals. |
| |
| 2014-12-24 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * doc/c-avr.texi: Document -mlink-relax and -mno-link-relax. |
| |
| 2014-12-24 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-avr.c (struct avr_opt_s): Change link_relax to |
| no_link_relax, extend comment. |
| (enum options): Add new OPTION_NO_LINK_RELAX. |
| (md_longopts): Add entry for -mno-link-relax. |
| (md_parse_option): Handle OPTION_NO_LINK_RELAX, and update |
| OPTION_LINK_RELAX. |
| (md_begin): Initialise linkrelax from no_link_relax. |
| (md_show_usage): Include -mno-link-relax option. |
| (relaxable_section): Only allocatable code sections can be |
| relaxed. |
| |
| 2014-12-23 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-avr.c: Add include for elf/avr.h. |
| (avr_elf_final_processing): New function. |
| * config/tc-avr.h (elf_tc_final_processing): Define. |
| (avr_elf_final_processing): Declare |
| |
| 2014-12-18 Xingxing Pan <xxingpan@marvell.com> |
| |
| * gas/config/tc-arm.c (arm_cpus): Add core marvell-whitney. |
| |
| 2014-12-23 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po: Updated French translation. |
| * po/uk.po: Updated Ukrainian translation. |
| |
| 2014-12-19 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (md_apply_fix): Apply alignment check |
| to the symbol and offset rather than *valP for |
| BFD_RELOC_MIPS_18_PCREL_S3. Also update the error message |
| for BFD_RELOC_MIPS_19_PCREL_S2. |
| |
| 2014-12-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (flag_compress_debug): Default to compress |
| debug sections for Linux. |
| * NEWS: Mention it. |
| |
| 2014-12-12 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.h (md_reg_eh_frame_to_debug_frame): Match current |
| gcc behaviour. |
| * config/te-aix.h: New file. |
| * configure.tgt: Use em=aix for powerpc-aix. |
| |
| 2014-12-09 Chen Gang <gang.chen.5i5j@gmail.com> |
| |
| * config/tc-tic4x.c (md_assemble): Ensure insn->name is zero |
| terminated. Simplify concatenation of parallel insn. |
| |
| 2014-12-06 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * configure.tgt: Add Visium support. |
| * Makefile.am (TARGET_CPU_CFILES): Move config/tc-vax.c around |
| and add config/tc-visium.c. |
| (TARGET_CPU_HFILES): Move config/tc-vax.h around and add |
| config/tc-visium.h. |
| * Makefile.in: Regenerate. |
| * config/tc-visium.c: New file. |
| * config/tc-visium.h: Likewise. |
| * po/POTFILES.in: Regenerate. |
| |
| 2014-11-28 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * config/tc-nios2.c (can_evaluate_expr, get_expr_value): Delete. |
| (output_addi, output_andi, output_ori, output_xori): Delete. |
| (md_assemble): Remove calls to deleted functions. |
| |
| 2014-11-25 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * config/tc-xtensa.c (search_trampolines): Move post-loop |
| condition check outside the search loop. |
| |
| 2014-11-24 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure: Regenerated. |
| |
| 2014-11-21 Terry Guo <terry.guo@arm.com> |
| |
| * config/tc-arm.c (md_assemble): Do not consider relaxation. |
| (md_convert_frag): Test and set target arch attribute accordingly. |
| (aeabi_set_attribute_string): Turn it into a global function. |
| * config/tc-arm.h (md_post_relax_hook): Enable it for ARM target. |
| (aeabi_set_public_attributes): Declare it. |
| |
| 2014-11-21 Terry Guo <terry.guo@arm.com> |
| |
| * config/tc-arm.c (fpu_vfp_ext_armv8xd): New. |
| (arm_cpus): Support cortex-m7. |
| (arm_fpus): Support fpv5-sp-d16 and fpv5-d16. |
| (do_vfp_nsyn_cvt_fpv8): Generate error when use D register for S |
| register only target like FPv5-SP-D16. |
| (do_neon_cvttb_1): Likewise. |
| (do_vfp_nsyn_fpv8): Likewise. |
| (do_vrint_1): Likewise. |
| (aeabi_set_public_attributes): Set proper FP arch for FPv5. |
| * doc/c-arm.texi: Document new cpu and fpu names for cortex-m7. |
| |
| 2014-11-20 Richard Earnshaw <rearnsha@arm.com> |
| |
| * config/tc-arm.c (rotate_left): Avoid undefined behaviour when |
| N = 0. |
| |
| 2014-11-20 Richard Earnshaw <rearnsha@arm.com> |
| |
| * config/tc-aarch64.c (warn_unpredictable_ldst): Check that transfer |
| registers are in the GP register set. Adjust warnings. Use correct |
| field member for address register. |
| * testsuite/gas/aarch64/diagnostic.l: Update. |
| |
| 2014-11-19 Ryan Mansfield <rmansfield@qnx.com> |
| |
| * config/tc-aarch64.c (md_assemble): Call warn_unpredictable_ldst. |
| (warn_unpredictable_ldst): New. |
| |
| 2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com> |
| |
| * config/tc-i386-intel.c (i386_operator): Remove last argument |
| from lex_got call. |
| * config/tc-i386.c (reloc): Remove bnd_prefix from parameters' |
| list. Return always BFD_RELOC_32_PCREL. |
| * (output_branch): Remove condition for BFD_RELOC_X86_64_PC32_BND. |
| * (output_jump): Update call to reloc accordingly. |
| * (output_interseg_jump): Likewise. |
| * (output_disp): Likewise. |
| * (output_imm): Likewise. |
| * (x86_cons_fix_new): Likewise. |
| * (lex_got): Remove bnd_prefix from parameters' list in macro and |
| declarations. Don't use BFD_RELOC_X86_64_PLT32_BND. |
| * (x86_cons): Update call to lex_got accordingly. |
| * (i386_immediate): Likewise. |
| * (i386_displacement): Likewise. |
| * (md_apply_fix): Don't use BFD_RELOC_X86_64_PLT32_BND nor |
| BFD_RELOC_X86_64_PC32_BND. |
| * (tc_gen_reloc): Likewise. |
| |
| 2014-11-18 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-aarch64.c (s_aarch64_arch_extension): New. |
| (md_pseudo_table): Add arch_extension. |
| (aarch64_parse_features): New parameter "ext_only". Handle it. |
| (aarch64_parse_cpu, aarch64_parse_arch, s_aarch64_cpu, |
| s_aarch64_arch): Pass FALSE as new third argument of |
| aarch64_parse_features(). |
| |
| 2014-11-17 Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Add "xgene2". |
| * doc/c-aarch64.texi: Document it. |
| |
| 2014-11-17 Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Add "xgene1". |
| * doc/c-aarch64.texi: Rename xgene-1 to xgene1. |
| |
| 2014-11-17 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .avx512vbmi. |
| * doc/c-i386.texi: Document it. |
| |
| 2014-11-17 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .avx512ifma. |
| * doc/c-i386.texi: Document it. |
| |
| 2014-11-17 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .pcommit. |
| * doc/c-i386.texi: Document it. |
| |
| 2014-11-17 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .clwb. |
| * doc/c-i386.texi: Document it. |
| |
| 2014-11-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Re-arrange avx512* and xsave* |
| items. |
| |
| * doc/c-i386.texi: Re-arrange avx512* and xsave*. Add |
| clflushopt and se1. Remove duplicated entries. |
| |
| 2014-11-13 Marcus Shawcroft <marcus.shawcroft@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Add CRC feature for |
| cortex-A53 and cortex-A57. |
| |
| 2014-11-13 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/17598 |
| * config/tc-i386.c (reloc): Support BFD_RELOC_X86_64_GOTPLT64. |
| |
| 2014-11-13 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/17512 |
| * config/obj-coff.c (coff_obj_symbol_new_hook): Set the is_sym |
| field. |
| |
| 2014-11-13 Marcus Shawcroft <marcus.shawcroft@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Remove example-1 and example-2. |
| |
| 2014-11-12 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-z80.c (parse_exp_not_indexed, parse_exp): Warning fixes. |
| |
| 2014-11-12 Alan Modra <amodra@gmail.com> |
| |
| PR ld/17482 |
| * config/tc-i386.c (output_insn): Don't test x86_elf_abi when |
| not ELF. |
| |
| 2014-11-11 Nick Clifton <nickc@redhat.com> |
| |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2014-11-07 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR ld/17482 |
| * config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix |
| for instructions with R_X86_64_GOTTPOFF relocation for x32 if |
| needed. |
| |
| 2014-11-06 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * config/tc-nios2.c (nios2_diagnose_overflow): Adjust call to |
| nios2_find_opcode_hash. |
| |
| 2014-11-05 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (mips_elf_final_processing): Add INSN_ISA32R6 |
| and INSN_ISA64R6 support. |
| |
| 2014-11-04 Alan Modra <amodra@gmail.com> |
| |
| * expr.c (expr_symbol_where): Don't use register keyword. |
| * app.c (app_push, app_pop, do_scrub_chars): Likewise. |
| * ecoff.c (add_string, add_ecoff_symbol, add_aux_sym_symint, |
| add_aux_sym_rndx, add_aux_sym_tir, add_procedure, add_file, |
| ecoff_build_lineno, ecoff_setup_ext, allocate_cluster. |
| allocate_scope, allocate_vlinks, allocate_shash, |
| allocate_thash, allocate_tag, allocate_forward, allocate_thead, |
| allocate_lineno_list): Likewise. |
| * frags.c (frag_more, frag_var, frag_variant, frag_wane): Likewise. |
| * input-file.c (input_file_push, input_file_pop): Likewise. |
| * input-scrub.c (input_scrub_push, input_scrub_next_buffer): Likewise. |
| * subsegs.c (subseg_change): Likewise. |
| * symbols.c (colon, symbol_table_insert, symbol_find_or_make) |
| (dollar_label_name, fb_label_name): Likewise. |
| * write.c (relax_align): Likewise. |
| * config/tc-alpha.c (s_alpha_pdesc): Likewise. |
| * config/tc-bfin.c (bfin_s_bss): Likewise. |
| * config/tc-i860.c (md_estimate_size_before_relax): Likewise. |
| * config/tc-m68hc11.c (md_convert_frag): Likewise. |
| * config/tc-m68k.c (m68k_ip, crack_operand): Likewise. |
| (md_convert_frag_1, s_even): Likewise. |
| * config/tc-mips.c (mips_clear_insn_labels): Likewise. |
| * config/tc-mn10200.c (md_begin): Likewise. |
| * config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise. |
| * config/tc-sh.c (sh_elf_cons): Likewise. |
| * config/tc-tic4x.c (tic4x_cons, tic4x_stringer): Likewise. |
| * config/m68k-parse.y (m68k_reg_parse): Likewise. Convert from K&R. |
| (yylex, m68k_ip_op, yyerror): Convert from K&R. |
| |
| 2014-11-04 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-d10v.c (find_opcode): Call frag_now_fix_octets rather |
| than equivalent obstack_next_free expression. |
| * config/tc-d30v.c (find_format): Likewise. |
| |
| 2014-11-03 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-msp430.c (msp430_srcoperand): Fix range test for |
| 20-bit values. |
| |
| 2014-10-31 Andrew Pinski <apinski@cavium.com> |
| Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> |
| |
| * config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3. |
| (mips_cpu_info_table): Octeon3 enables virt ase. |
| * doc/c-mips.texi: Document octeon3 as an acceptable value for |
| -march=. |
| |
| 2014-10-30 Dr Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
| |
| * config/tc-aarch64.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define to 7. |
| * config/tc-aarch64.c (aarch64_handle_align): Rewrite to handle |
| large alignments with a constant fragment size of |
| MAX_MEM_FOR_RS_ALIGN_CODE. |
| |
| 2014-10-29 Nick Clifton <nickc@redhat.com> |
| |
| * po/uk.po: New Ukranian translation. |
| |
| 2014-10-23 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * config/tc-nios2.c (nios2_insn_infoS): Add constant_bits field. |
| (nios2_arg_infoS, nios2_arg_hash, nios2_arg_lookup): Delete. |
| (nios2_control_register_arg_p): Delete. |
| (nios2_coproc_reg): Delete. |
| (nios2_relax_frag): Remove hard-coded instruction size. |
| (md_convert_frag): Use new insn accessor macros. |
| (nios2_diagnose_overflow): Remove hard-coded instruction size. |
| (md_apply_fix): Likewise. |
| (bad_opcode): New. |
| (nios2_parse_reg): New. |
| (nios2_assemble_expression): Remove prev_reloc parameter. Adjust |
| uses and callers. |
| (nios2_assemble_arg_c): New. |
| (nios2_assemble_arg_d): New. |
| (nios2_assemble_arg_s): New. |
| (nios2_assemble_arg_t): New. |
| (nios2_assemble_arg_i): New. |
| (nios2_assemble_arg_u): New. |
| (nios2_assemble_arg_o): New. |
| (nios2_assemble_arg_j): New. |
| (nios2_assemble_arg_l): New. |
| (nios2_assemble_arg_m): New. |
| (nios2_assemble_args): New. |
| (nios2_assemble_args_dst): Delete. |
| (nios2_assemble_args_tsi): Delete. |
| (nios2_assemble_args_tsu): Delete. |
| (nios2_assemble_args_sto): Delete. |
| (nios2_assemble_args_o): Delete. |
| (nios2_assemble_args_is): Delete. |
| (nios2_assemble_args_m): Delete. |
| (nios2_assemble_args_s): Delete. |
| (nios2_assemble_args_tis): Delete. |
| (nios2_assemble_args_dc): Delete. |
| (nios2_assemble_args_cs): Delete. |
| (nios2_assemble_args_ds): Delete. |
| (nios2_assemble_args_ldst): Delete. |
| (nios2_assemble_args_none): Delete. |
| (nios2_assemble_args_dsj): Delete. |
| (nios2_assemble_args_d): Delete. |
| (nios2_assemble_args_b): Delete. |
| (nios2_arg_info_structs): Delete. |
| (NIOS2_NUM_ARGS): Delete. |
| (nios2_consume_arg): Remove insn parameter. Use new macros. |
| Don't check register arguments here. Remove 'b' case. |
| (nios2_consume_separator): Move check for missing separators to... |
| (nios2_parse_args): ...here. Remove special case for optional |
| arguments. |
| (output_insn): Avoid using hard-coded insn size. |
| (output_ubranch): Likewise. |
| (output_cbranch): Likewise. |
| (output_call): Use new macros. |
| (output_addi): Likewise. |
| (output_ori): Likewise. |
| (output_xori): Likewise. |
| (output_movia): Likewise. |
| (md_begin): Remove nios2_arg_info_structs initialization. |
| (md_assemble): Initialize constant_bits field. Use |
| nios2_parse_args instead of looking up parse function in hash table. |
| |
| 2014-10-22 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * doc/as.texinfo: Update the MIPS FP ABI descriptions. |
| * doc/c-mips.texi: Spell check and correct throughout. |
| |
| 2014-10-21 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (s_insn): Set file options. |
| |
| 2014-10-21 Andrew Pinski <apinski@cavium.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): |
| Add thunderx. |
| * doc/c-aarch64.texi: Document that thunderx |
| is a valid processor name. |
| |
| 2014-10-21 Jan Beulich <jbeulich@suse.com> |
| |
| * read.c (HANDLE_CONDITIONAL_ASSEMBLY): New parameter "num_read". |
| (read_a_source_file): Adjust HANDLE_CONDITIONAL_ASSEMBLY |
| invocations. |
| (_find_end_of_line): Don't issue "stray '\\'" warning when in |
| false branch of conditional. |
| |
| 2014-10-21 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-aarch64.c (output_operand_error_record): Move down |
| assertion of idx being non-negative. Use local variables when |
| available. |
| |
| 2014-10-18 Alan Modra <amodra@gmail.com> |
| |
| PR 17493 |
| * write.c (adjust_reloc_syms): Don't allow symbols in reg_section |
| to be reduced to reg_section section symbol. |
| * gas/config/tc-i386.c (i386_finalize_immediate): Reject all |
| reg_section immediates. |
| |
| 2014-10-17 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * doc/c-mips.texi: Fix bad @value references. |
| |
| 2014-10-15 Tristan Gingold <gingold@adacore.com> |
| |
| * configure: Regenerate. |
| |
| 2014-10-15 Chen Gang <gang.chen.5i5j@gmail.com> |
| |
| * config/tc-tic4x.c (md_assemble): Correct strncat size. |
| |
| 2014-10-14 Tristan Gingold <gingold@adacore.com> |
| |
| * NEWS: Add marker for 2.25. |
| |
| 2014-10-14 Alan Modra <amodra@gmail.com> |
| |
| PR 17453 |
| * config/tc-i386.c (fits_in_signed_long): Use unsigned param and |
| expression to avoid signed overflow. |
| (fits_in_signed_byte, fits_in_unsigned_byte, fits_in_unsigned_word, |
| fits_in_signed_word, fits_in_unsigned_long): Similarly. |
| * expr.c (operand <'-'>): Avoid signed overflow. |
| * read.c (s_comm_internal): Likewise. |
| |
| 2014-10-14 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-sparc.c (sparc_md_end): Fix unused variable warnings. |
| |
| 2014-10-09 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (v9a_asr_table): Entry for %cps removed. |
| (sparc_arch_table): Remove the HWCAP_RANDOM, HWCAP_TRANS and |
| HWCAP_ASI_CACHE_SPARING from the architectures using them. |
| (HWS_V8): New define. |
| (HWS_V9): Likewise. |
| (HWS_VA): Likewise. |
| (HWS_VB): Likewise. |
| (HWS_VC): Likewise. |
| (HWS_VD): Likewise. |
| (HWS_VE): Likewise. |
| (HWS_VV): Likewise. |
| (sparc_arch): Use the HWS_* macros. Fix the `sparc4' architecture |
| to cover the HWCAP_ASI_BLK_INIT and HWCAP_IMA capabilities. |
| (hwcap_seen): Variable widened to 64 bits. |
| (hwcap_allowed): Likewise. |
| (sparc_arch): new field `hwcap2_allowed'. |
| (sparc_arch_table): provide hwcap2_allowed values for existing |
| archs. |
| (sparc_md_end): Add a HWCAPS2 object attribute to the elf object |
| in case any of the HWCAP2_* caps are used. |
| (sparc_ip): Take into account the new hwcaps2 bitmap to build the |
| list of seen/allowed hwcaps. |
| (get_hwcap_name): Argument widened to 64 bits to handle HWCAP2 |
| bits. |
| (HWS_VM): New define. |
| (HWS2_VM): Likewise. |
| (sparc_arch): New architectures `sparc5', `v9m' and `v8plusm'. |
| (v9a_asr_table): Add the %mwait (%asr28) ancillary state register |
| to the table. |
| (sparc_ip): Handle the %mcdper ancillary state register as an |
| operand. |
| (sparc_ip): Handle } arguments as fdrd floating point registers |
| (double) that are the same than frs1. |
| * doc/c-sparc.texi (Sparc-Opts): Document the -Av9e, -Av8pluse and |
| -xarch=v9e command line options. Also fix the description of the |
| -Av9v and -Av8plusv command line options. |
| Document the -Av9m, -Av8plusm,-Asparc5, -xarch=v9m and |
| -xarch=sparc5 command line options. |
| |
| 2014-09-29 Terry Guo <terry.guo@arm.com> |
| |
| * as.c (create_obj_attrs_section): Move it and call it from ... |
| * write.c (create_obj_attrs_section): ... here. |
| (subsegs_finish_section): Refactored. |
| |
| 2014-09-27 Alan Modra <amodra@gmail.com> |
| |
| * dwarf2dbg.c (all_segs_hash): Delete. |
| (get_line_subseg): Delete last_seg, last_subseg, last_line_subseg. |
| Retrieve line_seg for section via seg_info. |
| * subsegs.h (segment_info_typet): Add dwarf2_line_seg. |
| |
| 2014-09-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/17421 |
| * config/tc-i386.c (md_assemble): Disallow VEX/EVEX encoded |
| instructions in 16-bit mode. |
| |
| 2014-09-22 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-m68k.c (md_assemble): Add assert to work around |
| bogus trunk gcc warning. |
| * config/tc-pj.h (md_convert_frag): Warning fix. |
| * config/tc-xtensa.c (xg_assemble_vliw_tokens): Warning fix. |
| |
| 2014-09-17 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-arm.c (move_or_literal_pool, add_to_lit_pool): Use |
| bfd_int64_t instead of int64_t. |
| |
| 2014-09-16 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (evexrcig): New. |
| (build_evex_prefix): Force rounding bits. |
| (OPTION_MEVEXRCIG): New. |
| (md_longopts): Add mevexrcig. |
| (md_parse_option): Handle OPTION_MEVEXRCIG. |
| (md_show_usage): Document mevexrcig. |
| * doc/c-i386.texi (mevexrcig): Document new option. |
| |
| 2014-09-16 Kuan-Lin Chen <kuanlinchentw@gmail.com> |
| |
| * config/tc-nds32.c (nds32_fsrs, nds32_fdrs, nds32_gprs): Remove. |
| (relax_table): Add new relaxation pattern. |
| (do_pseudo_la_internal, do_pseudo_ls_bhw): Expand for PIC suffix. |
| (do_pseudo_move, do_pseudo_neg, do_pseudo_pushpopm): Fix. |
| (get_range_type, nds32_elf_record_fixup_exp, nds32_get_align, |
| nds32_elf_build_relax_relation, md_assemble, invalid_prev_frag, |
| nds32_relax_frag, md_estimate_size_before_relax): Adjust relaxation. |
| (relocation_table): Remove. |
| (relax_ls_table): Load-store relaxation pattern. |
| (hint_map): Define-use chain pattern. |
| (nds32_find_reloc_table, nds32_match_hint_insn): Analysis |
| relaxation pattern. |
| (nds32_parse_name): Parse PIC suffix. |
| * config/tc-nds32.h: Declare. |
| |
| 2014-09-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (OPTION_omit_lock_prefix): Renamed to ... |
| (OPTION_OMIT_LOCK_PREFIX): This. |
| (md_longopts): Updated. |
| (md_parse_option): Likewise. |
| |
| 2014-09-15 Andrew Bennett <andrew.bennett@imgtec.com> |
| Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (mips_nan2008): New static global. |
| (mips_flag_nan2008): Removed. |
| (LL_SC_FMT): New define. |
| (COP12_FMT): Updated. |
| (ISA_IS_R6): New define. |
| (ISA_HAS_64BIT_REGS): Add mips64r6. |
| (ISA_HAS_DROR): Likewise. |
| (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6. |
| (ISA_HAS_ROR): Likewise. |
| (ISA_HAS_ODD_SINGLE_FPR): Likewise. |
| (ISA_HAS_MXHC1): Likewise. |
| (hilo_interlocks): Likewise. |
| (md_longopts): Likewise. |
| (ISA_HAS_LEGACY_NAN): New define. |
| (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6. |
| (mips_ase): Add field rem_rev. |
| (mips_ases): Updated to add which ISA an ASE was removed in. |
| (mips_isa_rev): Add support for mips32r6 and mips64r6. |
| (mips_check_isa_supports_ase): Add support to check if an ASE |
| has been removed in the specified MIPS ISA revision. |
| (validate_mips_insn): Skip '-' character. |
| (macro_build): Likewise. |
| (mips_check_options): Prevent R6 working with fp32, mips16, |
| micromips, or branch relaxation. |
| (file_mips_check_options): Set R6 floating point registers to |
| 64 bit. Also deal with the nan2008 option. |
| (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, |
| BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, |
| BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and |
| BFD_RELOC_LO16_PCREL. |
| (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV |
| and OP_NON_ZERO_REG. |
| (match_check_prev_operand): New static function. |
| (match_same_rs_rt_operand): New static function. |
| (match_non_zero_reg_operand): New static function. |
| (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV |
| and OP_NON_ZERO_REG. |
| (insns_between): Added case to deal with forbidden slots. |
| (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2 |
| and BFD_RELOC_MIPS_26_PCREL_S2. |
| (match_insn): Add support for operands -A, -B, +' and +". Also |
| skip '-' character. |
| (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo. |
| (md_parse_option): Add support for mips32r6 and mips64r6. Also |
| update the nan option handling. |
| (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2, |
| BFD_RELOC_MIPS_26_PCREL_S2. |
| (mips_force_relocation): Prevent forced relaxation for MIPS r6. |
| (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2, |
| BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, |
| BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and |
| BFD_RELOC_LO16_PCREL. |
| (s_mipsset): Add support for mips32r6 and mips64r6. |
| (s_nan): Update to support the new nan2008 framework. |
| (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, |
| BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, |
| BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and |
| BFD_RELOC_LO16_PCREL. |
| (mips_elf_final_processing): Updated to use the mips_nan2008. |
| (mips_cpu_info_table): Add entries for mips32r6 and mips64r6. |
| (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref |
| macros for R6. |
| (mips_fix_adjustable): Make PC relative R6 relocations relative |
| to the symbol and not the section. |
| * configure.ac: Add support for mips32r6 and mips64r6. |
| * configure: Regenerate. |
| * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line |
| options. |
| * doc/as.texinfo: Likewise. |
| |
| 2014-09-15 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * tc-mips.c (check_fpabi): Move softfloat and singlefloat |
| checks higher. |
| |
| 2014-09-12 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps |
| when bumping the current architecture. |
| (md_begin): Adjust the highetst architecture level also when a |
| specific architecture is not requested. |
| |
| 2014-09-12 Andrew Bennett <andrew.bennett@imgtec.com> |
| |
| * configure.tgt: Add mips*-img-elf* target triple. |
| |
| 2014-09-12 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-i386.c (match_template): Remove redundant "!!" testing |
| single-bit bitfields. |
| (build_modrm_byte): Don't compare single-bit bitfields to "1". |
| |
| 2014-09-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * config/tc-arm.c (arm_cpus): Add cortex-a17. |
| |
| 2014-09-03 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-aarch64.c (parse_sys_reg): Remove the restriction on op0 |
| field. |
| |
| 2014-09-03 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Recognize PAIRREG. |
| (aarch64_features): Add entry for lse extension. |
| |
| 2014-08-26 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu |
| based on the info we got during parsing. |
| (arm_handle_align): Make sure the p2align expanding logic under thumb |
| unchanged. |
| |
| 2014-08-26 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and |
| jump to... |
| <M_SAAD_AB>: ... here. Assert that !microMIPS. |
| |
| 2014-08-26 Jan-Benedict Glaw <jbglaw@lug-owl.de> |
| |
| * config/tc-moxie.h (md_convert_frag): Silence warning. |
| |
| 2014-08-22 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix |
| register number for vector register types. |
| * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4. |
| (DWARF2_CIE_DATA_ALIGNMENT): Set to -8. |
| |
| 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE |
| flag if both the processor and opcode flags match. |
| |
| 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'. |
| |
| 2014-08-20 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs. |
| (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise. |
| (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise. |
| |
| 2014-08-20 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * config/tc-arm.c (parse_ifimm_zero): New function. |
| (enum operand_parse_code): Add OP_RSVD_FI0 value. |
| (parse_operands): Handle OP_RSVD_FI0. |
| (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe. |
| |
| 2014-08-20 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.am: Typo fix. |
| * Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2014-08-19 Andreas Tobler <andreast@fgznet.ch> |
| |
| * Makefile.am: Add FreeBSD ARM support. |
| * Mafefile.in: Regenerate. |
| * configure.tgt: Add FreeBSD ARM support. |
| * config/te-armfbsdeabi.h: New file. |
| * config/te-armfbsdvfp.h: Likewise. |
| |
| 2014-08-19 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2014-08-18 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-rl78.c (md_apply_fix): Correct handling of small sized |
| RELOC_RL78_DIFF fixups. |
| |
| 2014-08-18 Alan Modra <amodra@gmail.com> |
| |
| * read.c (parse_mri_cons): Warning fix. |
| |
| 2014-08-14 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac: Move ACX_LARGEFILE after LT_INIT. |
| * config.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2014-08-06 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (omit_lock_prefix): New. |
| (output_insn): Omit lock prefix if omit_lock_prefix is true. |
| (OPTION_omit_lock_prefix): New. |
| (md_longopts): Add momit-lock-prefix. |
| (md_parse_option): Handle momit-lock-prefix. |
| (md_show_usage): Add momit-lock-prefix=[no|yes]. |
| * doc/c-i386.texi (momit-lock-prefix): Document. |
| |
| 2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com> |
| |
| PR 10378 |
| * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in |
| SWITCH_TABLE case. |
| |
| 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC |
| and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout. |
| |
| 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (mips_flags_frag): New static global. |
| (struct mips_set_options): Add oddspreg field. |
| (file_mips_opts, mips_opts): Initialize oddspreg. |
| (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and |
| Loongson-3a. |
| (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg |
| and -mno-odd-spreg options. |
| (md_begin): Create .MIPS.abiflags section. |
| (fpabi_incompatible_with, fpabi_requires): New static function. |
| (check_fpabi): Likewise. |
| (mips_check_options): Handle fp=xx and oddspreg restrictions. |
| (file_mips_check_options): Set oddspreg by default for fp=xx. |
| (mips_oddfpreg_ok): Re-write function. |
| (check_regno): Check odd numbered registers regardless of FPR size. |
| For fp != 32 use as_bad instead of as_warn. |
| (match_float_constant): Rewrite check regarding FP register width. Add |
| support for generating constants when MXHC1 is present. Handle fp=xx |
| to comply with the ABI. |
| (macro): Update M_LI_DD similarly to match_float_constant. Generate |
| MTHC1 when available. Check that correct code can be generated for |
| fp=xx and fp=64 ABIs. |
| (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg |
| options. |
| (mips_convert_ase_flags): New static function. |
| (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64 |
| to determine when to add the EF_MIPS_FP64 flag. Populate the |
| .MIPS.abiflags section. |
| (md_mips_end): Update .gnu_attribute based on command line and .module |
| as applicable. Use check_fpabi to ensure .gnu.attribute and command |
| line/.module options are consistent. |
| * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new |
| -mfpxx, -modd-spreg and -mno-odd-spreg options. |
| * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg, |
| gnu_attribute values and FP ABIs. |
| |
| 2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com> |
| |
| Add RTEMS target support and simplify matching |
| |
| * gas/configure.tgt (or1k*-*-rtems*): Ensure a match. |
| (or1k*-*-*): Use or1k* to match or1knd and or1kZ. |
| |
| 2014-07-27 Anthony Green <green@moxielogic.com> |
| |
| * configure.tgt (generic_target): Add moxie-*-moxiebox* |
| * config/tc-moxie.c: Remove moxie_target_format. |
| (md_begin): Set default target_big_endian. |
| * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset. |
| (TARGET_FORMAT): Set based on target_big_endian. |
| |
| 2014-07-26 Alan Modra <amodra@gmail.com> |
| |
| * config/bfin-parse.y: Don't include obstack.h. |
| * config/obj-aout.c: Likewise. |
| * config/obj-coff.c: Likewise. |
| * config/obj-som.c: Likewise. |
| * config/tc-bfin.c: Likewise. |
| * config/tc-i960.c: Likewise. |
| * config/tc-rl78.c: Likewise. |
| * config/tc-rx.c: Likewise. |
| * config/tc-tic4x.c: Likewise. |
| * expr.c: Likewise. |
| * listing.c: Likewise. |
| * config/obj-elf.c (elf_file_symbol): Make name_length a size_t. |
| * config/tc-aarch64.c (symbol_locate): Likewise. |
| * config/tc-arm.c (symbol_locate): Likewise. |
| * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t. |
| * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t. |
| (s3_build_dependency_insn_hsh): Likewise. |
| * config/tc-score7.c (s7_build_score_ops_hsh): Likewise. |
| (s7_build_dependency_insn_hsh): Likewise. |
| * frags.c (frag_grow): Make parameter a size_t, and use size_t locals. |
| (frag_new): Make parameter a size_t. |
| (frag_var_init): Make max_chars and var parameters size_t. |
| (frag_var, frag_variant): Likewise. |
| (frag_room): Return a size_t. |
| (frag_align_pattern): Make n_fill parameter a size_t. |
| * frags.h: Update function prototypes. |
| * symbols.c (save_symbol_name): Make name_length a size_t. |
| |
| 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com> |
| Alexander Ivchenko <alexander.ivchenko@intel.com> |
| Maxim Kuznetsov <maxim.kuznetsov@intel.com> |
| Sergey Lega <sergey.s.lega@intel.com> |
| Anna Tikhonova <anna.tikhonova@intel.com> |
| Ilya Tocar <ilya.tocar@intel.com> |
| Andrey Turetskiy <andrey.turetskiy@intel.com> |
| Ilya Verbin <ilya.verbin@intel.com> |
| Kirill Yukhin <kirill.yukhin@intel.com> |
| Michael Zolotukhin <michael.v.zolotukhin@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS. |
| * doc/c-i386.texi: Document avx512dq/.avx512dq. |
| |
| 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com> |
| Alexander Ivchenko <alexander.ivchenko@intel.com> |
| Maxim Kuznetsov <maxim.kuznetsov@intel.com> |
| Sergey Lega <sergey.s.lega@intel.com> |
| Anna Tikhonova <anna.tikhonova@intel.com> |
| Ilya Tocar <ilya.tocar@intel.com> |
| Andrey Turetskiy <andrey.turetskiy@intel.com> |
| Ilya Verbin <ilya.verbin@intel.com> |
| Kirill Yukhin <kirill.yukhin@intel.com> |
| Michael Zolotukhin <michael.v.zolotukhin@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS. |
| * doc/c-i386.texi: Document avx512bw/.avx512bw. |
| |
| 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com> |
| Alexander Ivchenko <alexander.ivchenko@intel.com> |
| Maxim Kuznetsov <maxim.kuznetsov@intel.com> |
| Sergey Lega <sergey.s.lega@intel.com> |
| Anna Tikhonova <anna.tikhonova@intel.com> |
| Ilya Tocar <ilya.tocar@intel.com> |
| Andrey Turetskiy <andrey.turetskiy@intel.com> |
| Ilya Verbin <ilya.verbin@intel.com> |
| Kirill Yukhin <kirill.yukhin@intel.com> |
| Michael Zolotukhin <michael.v.zolotukhin@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS. |
| (build_vex_prefix): Don't abort on VEX.W. |
| (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2. |
| (check_VecOperations): Ditto. |
| * doc/c-i386.texi: Document avx512vl/.avx512vl. |
| |
| 2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com> |
| |
| Add or reactivate or1k-*-rtems* |
| * gas/configure.tgt (or1k-*-rtems*): Add. |
| |
| 2014-07-17 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (parse_register): Set need_vrex. |
| |
| 2014-07-15 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for |
| sign extension. Casting the type of imm1 and imm2 to offsetT. Fix |
| one logic error when checking X_op. |
| |
| 2014-07-14 Andreas Schwab <schwab@linux-m68k.org> |
| |
| * config/tc-m68k.c (md_convert_frag_1): Don't complain with |
| --pcrel about TAB (DBCCLBR, LONG) conversion. |
| |
| 2014-07-12 David Majnemer <david.majnemer@gmail.com> |
| |
| * read.c (assign_symbol): Don't force "set" symbols local for PE. |
| |
| 2014-07-08 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-arm.c (literal_pool): New field "alignment". |
| (find_or_make_literal_pool): Initialize "alignment" to 2. |
| (s_ltorg): Align the pool using value of "alignment" |
| (parse_big_immediate): New parameter "in_exp". Return |
| parsed expression if "in_exp" is not null. |
| (parse_address_main): Invoke "parse_big_immediate" for |
| constant parameter. |
| (add_to_lit_pool): Add one parameter 'nbytes'. |
| Split 8 byte entry into two 4 byte entry. |
| Add padding to align 8 byte entry to 8 byte boundary. |
| (encode_arm_cp_address): Generate literal pool entry if possible. |
| (move_or_literal_pool): Generate entry for vldr case. |
| (enum lit_type): New enum type. |
| (do_ldst): Use new enum type. |
| (do_ldstv4): Likewise. |
| (do_t_ldst): Likewise. |
| (neon_write_immbits): Support Thumb-2 mode. |
| |
| 2014-07-07 Barney Stratford <barney_stratford@fastmail.fm> |
| |
| * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by |
| name as [xyz][hl]. Permit using a symbol whoes name begins with |
| ‘r’ to refer to a register. |
| Allow arbitrary expressions for the P and p operators. |
| (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and |
| BFD_RELOC_AVR_PORT6 relocations. |
| |
| 2014-07-04 Alan Modra <amodra@gmail.com> |
| |
| * doc/internals.texi: Update "configure.in" comments. |
| * acinclude.m4: Likewise. |
| * config/tc-sparc.c: Likewise. |
| |
| 2014-07-04 Alan Modra <amodra@gmail.com> |
| |
| * configure.ac: Rename from configure.in. |
| * Makefile.in: Regenerate. |
| * config.in: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| |
| 2014-07-04 Alan Modra <amodra@gmail.com> |
| |
| * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete. |
| * doc/Makefile.in: Regenerate. |
| |
| 2014-07-04 Alan Modra <amodra@gmail.com> |
| |
| * configure.in: Include bfd/version.m4. |
| (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. |
| (BFD_VERSION): Delete. |
| * configure.com: Get bfd version from bfd/version.m4. |
| * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. |
| * configure: Regenerate. |
| * Makefile.in: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| |
| 2014-07-01 Barney Stratford <barney_stratford@fastmail.fm> |
| Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com> |
| Pitchumani Sivanupandi <pitchumani.s@atmel.com> |
| Soundararajan <Sounderarajan.D@atmel.com> |
| |
| * config/tc-avr.c (mcu_types): Add avrtiny arch. |
| Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20 |
| and attiny40. |
| (md_show_usage): Add avrtiny arch in usage message. |
| (avr_operand): validate and issue error for invalid register for |
| avrtiny. |
| add new reloc exp for 16 bit lds/sts instruction. |
| (md_apply_fix): check 16 bit lds/sts operand for out of range and |
| encode. |
| (md_assemble): check ISA for arch and issue diagnostic. |
| * NEWS: Mention new support. |
| * doc/c-avr.texi: Document support for avrtiny architecture. |
| |
| 2014-06-27 Alan Modra <amodra@gmail.com> |
| |
| * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set |
| SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error. |
| (obj_mach_o_frob_label): Avoid cascading errors. |
| (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED. |
| |
| 2014-06-18 DJ Delorie <dj@redhat.com> |
| |
| * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B |
| suffix optional. |
| |
| 2014-06-17 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * config/tc-mmix.c (loc_assert_s): New member frag. |
| (s_loc): Set it. |
| (mmix_md_end): If an error is reported for a LOC expression, patch |
| up the related frag. |
| |
| 2014-06-17 Chris Metcalf <cmetcalf@tilera.com> |
| |
| PR gas/16908 |
| * macro.c (buffer_and_nest): Honour #line directives inside |
| macros. |
| |
| 2014-06-17 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-arm.c (depr_it_insns): New check for inc/dec sp. |
| |
| 2014-06-17 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/tc-cris.c (cris_bad): New function. |
| (cris_process_instruction): Where applicable, use it instead of |
| as_bad. |
| |
| 2014-06-16 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs. |
| |
| 2014-06-16 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-aarch64.c (END_OF_INSN): New macro. |
| (parse_operands): Handle operand given and in wrong format when |
| operand is optional. |
| |
| 2014-06-16 Alan Modra <amodra@gmail.com> |
| |
| * write.h (subsegs_finish): Delete declaration. |
| * write.c (subsegs_finish): Make static. |
| (write_object_file): Call subsegs_finish from here. Don't print |
| warning and error count here.. |
| * as.c (main): ..do so here instead. Remove dead code for "no |
| object file generated". Split out count strings to better support |
| internationalisation. Don't call subsegs_finish. Tidy setting of |
| "keep_it". Run write_object_file even after errors. |
| (keep_it): Make static. |
| * config/obj-elf.c (elf_frob_symbol): Remove assert. |
| (elf_frob_file_before_adjust): Likewise. |
| |
| 2014-06-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-dlx.c (machine_ip): Move initialisation of the_insn |
| earlier. |
| |
| 2014-06-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-i386.c (reloc): Don't avoid pcrel check for |
| BFD_RELOC_SIZE64. Return NO_RELOC on failing pcrel check. |
| |
| 2014-06-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more. |
| (tic6x_output_exidx_entry): Likewise. |
| (md_apply_fix): Simplify 1 byte md_number_to_chars. |
| |
| 2014-06-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past |
| end of archive to temp file. |
| (tic54x_start_line_hook): Start scan for parallel on next line, |
| not one char into next line (which may overrun the buffer). |
| |
| 2014-06-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-vax.c (md_apply_fix): Rewrite. |
| (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC |
| define rather than the equivalent BFD_RELOC_NONE. |
| |
| 2014-06-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more. |
| (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT* |
| and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case. |
| |
| 2014-06-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-cris.c (md_create_long_jump): Follow "short" jump |
| with a nop rather than leaving uninitialised. |
| |
| 2014-06-13 Chen Gang <gang.chen.5i5j@gmail.com> |
| |
| * config/tc-score7.c: Replace sprintf with strcpy where |
| appropriate. |
| (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's |
| frag. |
| * config/tc-score.c (s3_relax_branch_inst16): Likewise. |
| (s3_relax_cmpbranch_inst32): Likewise. |
| |
| 2014-06-07 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT |
| on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields |
| in 64-bit mode. |
| |
| 2014-06-02 Martin Storsjo <martin@martin.st> |
| |
| * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:. |
| |
| 2014-06-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on |
| bfd's development.sh. |
| * Makefile.in, configure: Regenerate. |
| |
| 2014-06-03 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z. |
| (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z. |
| * doc/c-msp430.texi: Update command line option description. |
| |
| 2014-05-22 Alan Modra <amodra@gmail.com> |
| |
| * listing.c (listing_warning, listing_error): Add space after colon. |
| * messages.c (as_warn_internal, as_bad_internal): Use the same |
| string as above. |
| |
| 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (file_mips_opts_checked): New static global. |
| (s_module): New static function. |
| (file_ase): Remove. |
| (mips_pseudo_table): Add .module handler. |
| (mips_set_ase): Add opts argument and use instead of mips_opts. |
| (md_assemble): Use file_mips_check_options. |
| (md_parse_option): Update to use file_mips_opts instead of mips_opts. |
| (mips_set_architecture): Delete function. Moved to... |
| (mips_after_parse_args): Here. All logic now applies to |
| file_mips_opts first and then copies the final state to mips_opts. |
| Move error checking and defaults inference to mips_check_options and |
| file_mips_check_options. |
| (mips_check_options): New static function. Common option checking for |
| command line, .module and .set. Use .module values in error messages |
| instead of refering to command line options. |
| (file_mips_check_options): New static function. A wrapper for |
| mips_check_options with file_mips_opts. Updates BFD arch based on |
| final options. |
| (s_mipsset): Split into s_mipsset and parse_code_option. Settings |
| supported by both .set and .module are moved to parse_code_option. |
| Warnings and errors are kept in s_mipsset because when |
| parse_code_option is used with s_module the warnings are deferred |
| until code is generated. Any setting supporting 'default' value is |
| kept in s_mipsset as it is not applicable to s_module. Inferred |
| settings are also kept in s_mipsset as s_module does not infer any |
| settings. Use mips_check_options. |
| (parse_code_option): New static function derived from s_mipsset. |
| (s_module): New static function that implements .module. Allows file |
| level settings to be changed until code is generated. |
| (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options. |
| (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise. |
| (mips_elf_final_processing): Update file_ase to file_mips_opts.ase. |
| (md_mips_end): Use file_mips_check_options. |
| * doc/c-mips.texi: Document .module. |
| |
| 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * messages.c (as_warn_internal): Remove extra whitespace from |
| warning messages. |
| |
| 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (FP64_ASES): Add ASE_MSA. |
| (mips_after_parse_args): Do not select ASE_MSA without -mfp64. |
| |
| 2014-05-20 Mike Stump <mikestump@comcast.net> |
| |
| * messages.c (as_warn_internal): Ensure we don't interleave output |
| within a single line when make -j is used. |
| (as_bad_internal): Likewise. |
| |
| 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/obj-elf.h (obj_elf_seen_attribute): Declare. |
| * config/obj-elf.c (recorded_attribute_info): New structure. |
| (recorded_attributes): New variable. |
| (record_attribute, obj_elf_seen_attribute): New functions. |
| (obj_elf_vendor_attribute): Record which attributes have been seen. |
| |
| 2014-05-20 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter. |
| Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1. |
| (msp430_srcoperand): Store vshift value in operand. |
| |
| 2014-05-19 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/16858 |
| * config/tc-i386.c (md_apply_fix): Improve the detection of code |
| symbols for 32-bit PE targets. |
| |
| 2014-05-18 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (md_obj_begin): Delete. |
| (md_obj_end): Fold into... |
| (md_mips_end): ...here. Move to end of file. |
| |
| 2014-05-17 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/16946 |
| * config/tc-v850.c (handle_ctoff): Generate an error if called |
| when using the RH850 ABI. |
| |
| 2014-05-16 Kaushik Phata <Kaushik.Phatak@kpit.com> |
| |
| * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES |
| and OPTION_64BIT_DOUBLES. |
| (md_longopts): Add -m32bit-doubles and -m64bit-doubles. |
| (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles. |
| (md_show_usage): Show all of the RL78 options. |
| (rl78_float_cons): New static functions. |
| (md_pseudo_table): Update handler for "double". |
| * doc/c-rl78.texi: Document new options. |
| * doc/as.texinfo: Likewise. |
| |
| 2014-05-13 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout. |
| (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE. |
| (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE. |
| (GPR_SIZE, FPR_SIZE): New macros. Use throughout. |
| |
| 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (md_parse_option): Update missed file_mips_isa |
| references. |
| |
| 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (mips_set_options): Rename fp32 field to fp. |
| Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout. |
| (file_mips_gp32, file_mips_fp32, file_mips_soft_float, |
| file_mips_single_float, file_mips_isa, file_mips_arch): Merge into |
| one struct... |
| (file_mips_opts): Here. New static global. Update throughout. |
| (mips_opts): Update defaults for gp32 and fp. |
| |
| 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com> |
| |
| * config/tc-mips.c (streq): Define. |
| (mips_convert_symbolic_attribute): New function. |
| * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define. |
| (mips_convert_symbolic_attribute): New prototype. |
| |
| 2014-05-02 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF* |
| fixups as signed. |
| |
| 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com> |
| |
| * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3 |
| and mips64r5. |
| (ISA_HAS_64BIT_FPRS): Likewise. |
| (ISA_HAS_ROR): Likewise. |
| (ISA_HAS_ODD_SINGLE_FPR): Likewise. |
| (ISA_HAS_MXHC1): Likewise. |
| (hilo_interlocks): Likewise. |
| (md_longopts): Likewise. |
| (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5. |
| (ISA_HAS_DROR): Likewise. |
| (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and |
| OPTION_MIPS64R5. |
| (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and |
| mips64r5. |
| (md_parse_option): Likewise. |
| (s_mipsset): Likewise. |
| (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3 |
| and mips64r5. Also change p5600 entry to be mips32r5. |
| * configure.in: Add support for mips32r3, mips32r5, mips64r3 and |
| mips64r5. |
| * configure: Regenerate. |
| * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and |
| -mips64r5 command line options. |
| * doc/as.texinfo: Likewise. |
| |
| 2014-04-28 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/16858 |
| * config/tc-i386.c (md_apply_fix): Do not adjust value of |
| pc-relative fixes against weak symbols. |
| |
| 2014-04-26 Alan Modra <amodra@gmail.com> |
| |
| * po/POTFILES.in: Regenerate. |
| |
| 2014-04-24 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF |
| based targets. |
| |
| 2014-04-23 Will Newton <will.newton@linaro.org> |
| |
| * config/tc-arm.c (s_ltorg): Call make_mapping_symbol |
| directly instead of mapping_state. |
| |
| 2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com> |
| |
| * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA. |
| (md_longopts): Add xpa and no-xpa command line options. |
| (mips_ases): Add MIPS XPA ASE. |
| (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE. |
| * doc/as.texinfo: Document the MIPS XPA command line options. |
| * doc/c-mips.texi: Document the MIPS XPA command line options, |
| and assembler directives. |
| |
| 2014-04-22 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to |
| unbreak self-test mode. |
| |
| 2014-04-22 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * config/tc-xtensa.c (xtensa_handle_align): record alignment for the |
| first section frag. |
| |
| 2014-04-22 Christian Svensson <blue@cmd.nu> |
| |
| * Makefile.am: Remove openrisc and or32 support. Add support for or1k. |
| * configure.in: Likewise. |
| * configure.tgt: Likewise. |
| * doc/as.texinfo: Likewise. |
| * config/obj-coff.h: Likewise. |
| * config/tc-or1k.c: New file. |
| * config/tc-or1k.h: New file. |
| * config/tc-openrisc.c: Delete. |
| * config/tc-openrisc.h: Delete. |
| * config/tc-or32.c: Delete. |
| * config/tc-or32.h: Delete. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2014-04-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg. |
| * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise. |
| |
| 2014-04-10 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com> |
| |
| * config/tc-avr.c: Add new flag mlink-relax. |
| (md_show_usage): Add flag and help text. |
| (md_parse_option): Record whether link relax is turned on. |
| (relaxable_section): New. |
| (avr_validate_fix_sub): New. |
| (avr_force_relocation): New. |
| (md_apply_fix): Generate DIFF reloc. |
| (avr_allow_local_subtract): New. |
| |
| * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0. |
| (TC_FORCE_RELOCATION): Define. |
| (TC_FORCE_RELOCATION_SUB_SAME): Define. |
| (TC_VALIDATE_FIX_SUB): Define. |
| (avr_force_relocation): Declare. |
| (avr_validate_fix_sub): Declare. |
| (md_allow_local_subtract): Define. |
| (avr_allow_local_subtract): Declare. |
| |
| 2014-04-10 Andrew Bennett <andrew.bennett@imgtec.com> |
| |
| * config/tc-mips.c (mips_cpu_info_table): Add P5600 |
| configuation. |
| * doc/c-mips.texi: Document p5600. |
| |
| 2014-04-09 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter. |
| * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter. |
| * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter. |
| * read.c (emit_expr_fix): Mark the r parameter as potentially |
| unused. |
| |
| 2014-04-09 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg): |
| New static vars. |
| (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround. |
| (ppc_elf_cons_fix_check): New function. |
| (md_assemble): Set last_insn, last_seg, last_subseg. |
| (ppc_byte, md_apply_fix): Handle warn_476. |
| * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define. |
| (ppc_elf_cons_fix_check): Declare. |
| * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK. |
| |
| 2014-04-09 Alan Modra <amodra@gmail.com> |
| |
| * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter. |
| * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter. |
| * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype. |
| (TC_CONS_FIX_NEW): Add RELOC parameter. |
| * gas/config/tc-arm.c (cons_fix_new_arm): Similarly |
| * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly. |
| * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly. |
| * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly. |
| * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly. |
| * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly. |
| * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly. |
| * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly. |
| * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW): |
| Similarly. |
| * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly. |
| * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly. |
| * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly. |
| * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly. |
| * gas/config/tc-rx.c (rx_cons_fix_new): Similarly. |
| * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly. |
| * gas/config/tc-sh.c (sh_cons_fix_new): Similarly. |
| * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly. |
| * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly. |
| * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW): |
| Similarly. |
| * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly. |
| * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW): |
| Similarly. |
| * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc. |
| * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto. |
| * gas/config/tc-avr.c (exp_mod_data): Make global. |
| (pexp_mod_data): Delete. |
| (avr_parse_cons_expression): Return exp_mod_data pointer. |
| (avr_cons_fix_new): Add exp_mod_data_t pointer param. |
| (exp_mod_data_t): Move typedef.. |
| * gas/config/tc-avr.h: ..to here. |
| (exp_mod_data): Declare. |
| (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define. |
| (avr_parse_cons_expression, avr_cons_fix_new): Update prototype. |
| (TC_CONS_FIX_NEW): Update. |
| * gas/config/tc-hppa.c (hppa_field_selector): Delete static var. |
| (cons_fix_new_hppa): Add hppa_field_selector param. |
| (fix_new_hppa): Adjust. |
| (parse_cons_expression_hppa): Return field selector. |
| * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto. |
| (cons_fix_new_hppa): Likewise. |
| (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define. |
| * gas/config/tc-i386.c (got_reloc): Delete static var. |
| (x86_cons_fix_new): Add reloc param. |
| (x86_cons): Return got reloc. |
| * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto. |
| (TC_CONS_FIX_NEW): Add RELOC param. |
| * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust |
| calls. |
| * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype. |
| (TC_CONS_FIX_NEW): Add reloc param. |
| * gas/config/tc-microblaze.c (parse_cons_expression_microblaze): |
| Return reloc. |
| (cons_fix_new_microblaze): Add reloc param. |
| * gas/config/tc-microblaze.h: Formatting. |
| (parse_cons_expression_microblaze): Update proto. |
| (cons_fix_new_microblaze): Likewise. |
| * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var. |
| (nios2_cons): Return ldo reloc. |
| (nios2_cons_fix_new): Delete. |
| * gas/config/tc-nios2.h (nios2_cons): Update prototype. |
| (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete. |
| * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word, |
| short. Make llong use cons. |
| (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED. |
| (ppc_elf_cons): Delete. |
| (ppc_elf_parse_cons): New function. |
| (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED. |
| (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED. |
| * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define |
| (ppc_elf_parse_cons): Declare. |
| * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var. |
| (sparc_cons): Return reloc specifier. |
| (cons_fix_new_sparc): Add reloc specifier param. |
| (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc. |
| * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define. |
| (TC_PARSE_CONS_RETURN_NONE): Define. |
| (sparc_cons, cons_fix_new_sparc): Update prototype. |
| * gas/config/tc-v850.c (hold_cons_reloc): Delete static var. |
| (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED. |
| (md_assemble): Likewise. |
| (parse_cons_expression_v850): Return reloc. |
| (cons_fix_new_v850): Add reloc parameter. |
| * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto. |
| (cons_fix_new_v850): Likewise. |
| * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var. |
| (vax_cons): Return reloc. |
| (vax_cons_fix_new): Add reloc parameter. |
| * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto. |
| * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param. |
| * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto. |
| * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default. |
| (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls. |
| * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value. |
| (do_parse_cons_expression): Adjust. |
| (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION |
| to emit_expr_with_reloc. |
| (emit_expr_with_reloc): New function handling reloc, mostly |
| extracted from.. |
| (emit_expr): ..here. |
| (emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation. |
| Handle reloc. |
| (parse_mri_cons): Convert to ISO. |
| * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define. |
| (TC_PARSE_CONS_RETURN_NONE): Define. |
| (emit_expr_with_reloc): Declare. |
| (emit_expr_fix): Update prototype. |
| * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation. |
| |
| 2014-04-03 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .se1. |
| * doc/c-i386.texi: Document .se1/se1. |
| |
| 2014-04-02 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-rl78.c (md_apply_fix): Add overflow warnings for |
| pc-relative branches. |
| |
| 2014-04-02 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/16765 |
| * config/tc-arm.c (create_unwind_entry): Report an error if an |
| attempt to recreate an unwind directive is encountered. |
| |
| 2014-03-27 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to |
| sprintf in order to avoid a compile time warning. |
| |
| 2014-03-26 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit |
| relocation is used on an 8-bit operand or vice versa. |
| (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE. |
| (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16. |
| |
| 2014-03-25 Nick Clifton <nickc@redhat.com> |
| |
| * config/obj-coff-seh.c (obj_coff_seh_code): New function - |
| switches the current segment back to the code segment recorded |
| when seh_proc was last invoked. |
| * config/obj-coff-seh.h (SEH_CMDS): Add seh_code. |
| |
| 2014-03-25 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05. |
| (md_assemble): Likewise. Warn. |
| |
| 2014-03-21 David Weatherford <weath@cadence.com> |
| Max Filippov <jcmvbkbc@gmail.com> |
| |
| * config/tc-xtensa.c (xtensa_check_frag_count) |
| xtensa_create_trampoline_frag, |
| xtensa_maybe_create_trampoline_frag, init_trampoline_frag, |
| find_trampoline_seg, search_trampolines, get_best_trampoline, |
| check_and_update_trampolines, add_jump_to_trampoline, |
| dump_trampolines): New functions. |
| (md_parse_option): Add cases for --[no-]trampolines options. |
| (md_assemble, finish_vinsn, xtensa_end): Add call to |
| xtensa_check_frag_count. |
| (xg_assemble_vliw_tokens): Add call to |
| xtensa_maybe_create_trampoline_frag. |
| (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state. |
| (relax_frag_immed): Relax jump instructions that cannot reach its |
| target. |
| * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New |
| relax state. |
| * doc/as.texinfo: Document --[no-]trampolines command-line options. |
| * doc/c-xtensa.texi: Document trampolines relaxation and command |
| line options. |
| * frags.c (get_frag_count, clear_frag_count): New function. |
| (frag_alloc): Increment totalfrags counter. |
| * frags.h (get_frag_count, clear_frag_count): New function. |
| |
| 2014-03-20 DJ Delorie <dj@redhat.com> |
| |
| * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add. |
| * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call |
| rl78_relax(). |
| * config/tc-rl78.h (md_relax_frag): Define. |
| (rl78_relax_frag): Declare. |
| * config/tc-rl78.c (rl78_relax): Add. |
| (md_assemble): Set up the variable frags also when relaxing. |
| (op_type_T): New. |
| (rl78_opcode_type): New. |
| (rl78_frag_fix_value): New. |
| (md_estimate_size_before_relax): New-ish. |
| (rl78_relax_frag): New. |
| (md_convert_frag): New-ish. |
| |
| 2014-03-20 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define. |
| * config/tc-mips.c (md_pcrel_from): Remove error message. |
| (md_apply_fix): Convert PC-relative BFD_RELOC_32s to |
| BFD_RELOC_32_PCREL. Report a specific error message for unhandled |
| PC-relative expressions. Handle BFD_RELOC_8. |
| |
| 2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-sparc.c (hpriv_reg_table): Added entries for |
| %hstick_offset and %hstick_enable. |
| * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and |
| %hstick_enable hyperprivileged registers. |
| |
| 2014-03-19 Daniel Gutson <daniel.gutson@tallertechnologies.com> |
| Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (codecomposer_syntax): New flag that states whether the |
| CCS syntax compatibility mode is on or off. |
| (asmfunc_states): New enum to represent the asmfunc directive state. |
| (asmfunc_state): New variable holding the asmfunc directive state. |
| (comment_chars): Rename to arm_comment_chars. |
| (line_separator_chars): Rename to arm_line_separator_chars. |
| (s_ccs_ref): New function that handles the .ref directive. |
| (asmfunc_debug): New function. |
| (s_ccs_asmfunc): New function that handles the .asmfunc directive. |
| (s_ccs_endasmfunc): New function that handles the .endasmfunc directive. |
| (s_ccs_def): New function that handles the .def directive. |
| (tc_start_label_without_colon): New function. |
| (md_pseudo_table): Added new CCS directives. |
| (arm_ccs_mode): New function that handles the -mccs command line option. |
| (arm_long_opts): Added new -mccs command line option. |
| * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro. |
| (TC_START_LABEL_WITHOUT_COLON): New macro. |
| (tc_start_label_without_colon): Added extern function declaration. |
| (tc_comment_chars): Define. |
| (tc_line_separator_chars): Define. |
| * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined. |
| * read.c (read_begin): Likewise. |
| * doc/as.texinfo: Add documentation for the -mccs command line |
| option. |
| * doc/c-arm.texi: Likewise. |
| * doc/internals.texi: Document tc_line_separator_chars. |
| * NEWS: Mention the new feature. |
| |
| 2014-03-18 Jiong Wang <jiong.wang@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_opts): Add new option |
| "mno-verbose-error". |
| (verbose_error_p): Initialize to 1. |
| * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error |
| and -mno-verbose-error. |
| |
| 2014-03-17 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/16694 |
| * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP |
| registers as well. |
| |
| 2014-03-13 Richard Earnshaw <rearnsha@arm.com> |
| Jiong Wang <Jiong.Wang@arm.com> |
| |
| * doc/c-aarch64.texi: Clean up some formatting issues. |
| (AArch64 Options): Document -mcpu and -march. |
| (AArch64 Extensions): New node. |
| |
| 2014-03-13 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-i386.c (use_big_obj): Declare. |
| (OPTION_MBIG_OBJ): Define. |
| (md_longopts): Add -mbig-obj option. |
| (md_parse_option): Handle it. |
| (md_show_usage): Display help for this option. |
| (i386_target_format): Use bigobj for x86-64 if -mbig-obj. |
| * doc/c-i386.texi: Document the option. |
| |
| 2014-03-12 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/16688 |
| * config/tc-aarch64.c (literal_expression): New structure. |
| (literal_pool): Replace exp array with literal_expression array. |
| (add_to_lit_pool): When adding a bignum cache the big value. |
| (s_ltorg): When emitting a bignum initialise the global bignum |
| array from the cached value. |
| |
| 2014-03-12 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.in: Regenerate. |
| * config.in: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| |
| 2014-03-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com> |
| Vishnu KS <Vishnu.k_s@atmel.com> |
| Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com> |
| Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com> |
| |
| * gas/tc-avr.c: Add new devices |
| avr25: ata5272, attiny828 |
| avr35: ata5505, attiny1634 |
| avr4: atmega8a, ata6285, ata6286, atmega48pa |
| avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa, |
| atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a, |
| atmega16hva2 |
| avr51: atmega128a, atmega1284 |
| avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4, |
| atxmega32e5, atxmega16e5, atxmega8e5 |
| avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3, |
| atxmega64c3, atxmega64d4 |
| avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3, |
| atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u, |
| atxmega256c3, atxmega384c3, atxmega384d3 |
| avrxmega7: atxmega128a4u |
| * doc/c-avr.texi: Ditto. |
| |
| 2014-03-05 Alan Modra <amodra@gmail.com> |
| |
| Update copyright years. |
| |
| 2014-03-05 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_elf_suffix): Support @localentry. |
| (md_apply_fix): Support R_PPC64_ADDR64_LOCAL. |
| |
| 2014-03-05 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (md_assemble): Move code adjusting reloc types |
| later. Merge absolute and relative branch reloc selection. |
| Generate 16-bit relocs for most 16-bit insn fields given a |
| non-constant expression. |
| |
| 2014-03-05 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support. |
| (md_assemble): Don't call ppc_is_toc_sym for ELF. |
| |
| 2014-03-04 Heiher <r@hev.cc> |
| |
| * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for |
| Loongson-3A. |
| |
| 2014-03-03 Nick Clifton <nickc@redhat.com> |
| |
| * config/msp430/msp430.c: Replace known mcu array with known |
| msp430 ISA mcu name array. |
| Accept any name for -mmcu option. |
| Add -mz option to warn about missing NOP following an interrupt |
| status change. |
| (check_for_nop): New. |
| (msp430_operands): Emit a warning, if requested, when an interrupt |
| changing instruction is not followed by a NOP. |
| * doc/c-msp430.c: Document -mz option. |
| |
| 2014-03-03 Alan Modra <amodra@gmail.com> |
| |
| * config/bfin-lex-wrapper.c: Correct copyright date. |
| * config/obj-fdpicelf.c: Likewise. |
| * config/obj-fdpicelf.h: Likewise. |
| * config/tc-frv.c: Correct copyright punctuation. |
| * config/tc-ip2k.c: Likewise. |
| * config/tc-iq2000.c: Likewise. |
| * config/tc-mep.c: Likewise. |
| * config/tc-tic4x.c: Likewise. |
| * config/tc-tic4x.h: Likewise. |
| |
| 2014-03-01 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com> |
| |
| * config/tc-avr.c: Remove atxmega16x1. |
| |
| 2014-02-28 Alan Modra <amodra@gmail.com> |
| |
| * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length |
| field for 64-bit dwarf. |
| |
| 2014-02-21 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .prefetchwt1. |
| * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1. |
| |
| 2014-02-12 Ilya Tocar <ilya.tocar@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves. |
| * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/ |
| clflushopt/.clfushopt. |
| |
| 2014-02-10 Alan Modra <amodra@gmail.com> |
| |
| * po/POTFILES.in: Regenerate. |
| * po/gas.pot: Regenerate. |
| |
| 2014-02-03 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * config/tc-nios2.c (md_apply_fix): Test for new relocs. |
| (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo, |
| %got_hiadj relocation operators. Sort table and add comment |
| to explain ordering. |
| (nios2_fix_adjustable): Test for new relocs. |
| * doc/c-nios2.texi (Nios II Relocations): Document new relocation |
| operators. |
| |
| 2014-01-30 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT. |
| (nios2_assemble_args_m): Likewise. |
| (md_assemble): Likewise. |
| |
| 2014-01-24 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-msp430.c (msp430_section): Always flag data sections, |
| regardless of -md. |
| (msp430_frob_section): New. Make sure all sections are noticed if |
| they have content. |
| (msp430_lcomm): New. Flag bss if .lcomm is seen. |
| (msp430_comm): New. Likewise. |
| (md_pseudo_table): Add them. |
| * config/tc-msp430.h (msp430_frob_section): Declare. |
| (tc_frob_section): Define. |
| |
| 2014-01-23 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-msp430.c (show_mcu_list): Delete. |
| (md_parse_option): Accept any MCU name. Accept several more |
| variants for the -mcpu option. |
| (md_show_usage): Do not call show_mcu_list. |
| |
| 2014-01-22 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>" |
| * doc/c-msp430.texi (MSP430 Directives): Document it. |
| |
| 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com> |
| |
| * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2 |
| gather assert. |
| |
| 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com> |
| |
| PR gas/16489 |
| * config/tc-i386.c (check_VecOperands): Add check for invalid |
| register set in AVX512 gathers. |
| |
| 2014-01-22 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-tic4x.c (md_shortopts): s/CONST/const/. |
| |
| 2014-01-21 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-rl78.c (require_end_of_expr): New. |
| (md_operand): Call it. |
| (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations |
| as not overflowing. |
| |
| 2014-01-17 Will Newton <will.newton@linaro.org> |
| |
| * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1 |
| for the s32.f64 flavours of VCVT. |
| |
| 2014-01-14 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/16434 |
| * config/tc-z80.c (wrong_match): Provide format string to |
| as_warn. |
| (parse_exp_not_indexed): Delete unused variable dummy. |
| (emit_byte): Delete unused variable fixp. |
| |
| 2014-01-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (regbnd): Removed. |
| (vec_disp8): Likewise. |
| |
| 2014-01-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * as.c (parse_args): Update copyright year to 2014. |
| |
| 2014-01-07 Tom Tromey <tromey@redhat.com> |
| |
| * config/tc-tic30.c (debug): Avoid old VA_* compatibility |
| wrappers. |
| |
| 2014-01-07 Tom Tromey <tromey@redhat.com> |
| |
| * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't |
| use PARAMS. |
| |
| 2014-01-07 Tom Tromey <tromey@redhat.com> |
| |
| * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES. |
| |
| 2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1" |
| |
| For older changes see ChangeLog-2013 |
| |
| Copyright (C) 2014 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
